3G NOTES - D
3G NOTES - D
1.
2.
3.
4.
lst <utrancell>
lst singmu
ldel <utrancell>
lst .b<iub-no>
eg. lst .b0095 (WARNING : Check other proxys)
ldel .<iub-no>
(WARNING : Exclude other proxys)
ldel tat1bu
22517 RncFunction=1,IubLink=Iub_TAT1BU,NodeSynchTp=1
>>> Mo deleted
22518 RncFunction=1,IubLink=Iub_TAT1BU,NodeSynchTp=2
>>> Mo deleted
22519 RncFunction=1,IubLink=Iub_TAT1BU,NbapCommon=1
22520 RncFunction=1,IubLink=Iub_TAT1BU,NbapDedicated=1
Second round delete
22516 RncFunction=1,IubLink=Iub_TAT1BU,NodeSynch=1
Third round delete
22515 RncFunction=1,IubLink=Iub_TAT1BU
Complete 1st part (then comes the ldel .b322
ldel .vc322)
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
1 (ENABLED)
IubLink=Iub_MAJAMU,NbapDedicated=1
UniSaalProfile=win100
lst .vc<iub-no>
ldel .vc<iub-no>
2973
1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1436
2974
1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1435
2975
1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1434
2976
1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1432
3978
1 (ENABLED) TransportNetwork=1,AtmPort=MS-7-1,VplTp=vp1,VpcTp=1,VclTp=vc1432
4187
1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=vp1,VpcTp=1,VclTp=vc1432
4484
1 (ENABLED) TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc1444
4485
1 (ENABLED) TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc1443
4487
1 (ENABLED) TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc1433
======================================================================
=============
Total: 10 MOs
8405 TransportNetwork=1,AtmCrossConnection=b297ib
8406 TransportNetwork=1,Aal0TpVccTp=b297sa1
8407 TransportNetwork=1,Aal0TpVccTp=b297sb1
Followed by
ldel .b297
8408 TransportNetwork=1,Aal5TpVccTp=b297ca
8410 TransportNetwork=1,Aal5TpVccTp=b297cb
8412 TransportNetwork=1,Aal5TpVccTp=b297da
8414 TransportNetwork=1,Aal5TpVccTp=b297db
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
4485 TransportNetwork=1,AtmPort=MS-6-1,VplTp=vp101,VpcTp=1,VclTp=vc29732
6375 TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc29733
6376 TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc29735
6377 TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc29743
6378 TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc29744
6855 TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc29732
6856 TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc29734
6857 TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc29736
6858 TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc29737
FINISH RNC part
5.
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
pr .b<iub-no>
RXIKLCC02> pr .b322
3883 TransportNetwork=1,AtmCrossConnection=b322cb
3884 TransportNetwork=1,AtmCrossConnection=b322ca
4372 TransportNetwork=1,Aal5TpVccTp=b322qb
4373 TransportNetwork=1,Aal5TpVccTp=b322qa
4513 TransportNetwork=1,UniSaalTp=b322qb
4514 TransportNetwork=1,UniSaalTp=b322qa
4937 TransportNetwork=1,AtmCrossConnection=b322sb1
4940 TransportNetwork=1,AtmCrossConnection=b322sa1
======================================================================
=============
Total: 14 MOs
lk <proxy>
pr aal2routingcase 6012200500<rncid><iub-no>
lget TransportNetwork=1,Aal2RoutingCase=601220050010297
del <proxy>
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
2476
2477
2483
2484
Total:
TransportNetwork=1,AtmCrossConnection=b297db
TransportNetwork=1,AtmCrossConnection=b297da
TransportNetwork=1,AtmCrossConnection=b297cb
TransportNetwork=1,AtmCrossConnection=b297ca
15 MOs attempted, 10 MOs deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
Run again
3278 TransportNetwork=1,Aal2Sp=1,Aal2Ap=b297
>>> Mo deleted
3457 TransportNetwork=1,UniSaalTp=b297qb
>>> Mo deleted
3459 TransportNetwork=1,UniSaalTp=b297qa
>>> Mo deleted
==============================================================================
=====
Total: 5 MOs attempted, 3 MOs deleted
Run again
Deleting ...
==============================================================================
=====
3094 TransportNetwork=1,Aal5TpVccTp=b297qb
>>> Mo deleted
3095 TransportNetwork=1,Aal5TpVccTp=b297qa
>>> Mo deleted
==============================================================================
=====
Total: 2 MOs attempted, 2 MOs deleted
- remains
6.
lst .b<iub-no>
ldel .b<iub-no>
lpr atmport=ms-18-1
lget atmport=ms-18-1
del <proxydown>-<proxytop-1>
WARNING : Dont remove the MS port
del AtmPort=MS-20-1-*
(to delete the whole 63 ports of the ETMC41)
lst Slot=18.*Vc12Ttp=1
or to block all ports :
lbl Slot=18.*Vc12Ttp=*
lpr vc<iub>
ldel vc<iub>
lst .b<iub-no>
ldel .b<iub-no>
7.
get 1
ls -l /p001200/pm/ | grep xml
pst
pmr [-m 5 p 3]
9.
8.
lpr vc<iub>
ldel vc<iub>
pst
pgetsn <proxy>
pcr <name> <mo-name> <counter-name>
pget <mo-name> <counter-name>
pbl/pdeb <proxy>
pdel <proxy>
pr retdevice
get <proxy>
set <proxy> electricalAntennaTilt <value>
get ret electrical
lgevsm
set
pst
lst cell
get radiolinks (to see how many line/s being used)
In RNC
lst utrancell
st utrancell 1.*0
st plug
cabx
cab
Pr cell
Get proxy
Get
set utrancell=KCC1BU servicearearef LocationArea=1,servicearea=284
21. To change maxtxpowerdl for specific cell (usually to clear CONGESTION alarms)
In RNC
get CUV1BU_1 maxtxpowerdl --> in EMAS, click Utrancell, Properties, Cell (PCIPCH in Common Channel)
set CUV1BU_1 maxtxpowerdl 402
maxtxpowerdl value stated as x10dBm (actual = 0.1x)
maxtxpowerdl value usually 0.4 dBm lesser than maxDlPowerCapability (from RBS)
thus if maxDlPowerCapability 422, maxtxpowerdl 418 (422 4)
in P3 - get SOGXBU_1 maximumtransmissionpower
lst sunw
lbl sunw (to lock cell & channels)
bl sunw (to lock cell only)
deb sunw (to unlock)
Get 0
Get 1 (check ntpServerAddressPrimary)
& RBS
Read clock (GMT +8)
ntpconfig info
Check which OMNIFSERVER the node is connected to (i.e ntpServerAddressPrimary) from get 1
lpr atmport
vc32&33 for signaling
lpget 1007 (vc proxy) to see number of ATM traffic cells transferred
get atmport=1-2-2
then : lget Subrack=1,Slot=2,PlugInUnit=1,Etm1=1,E1PhysPathTerm=pp2
to un/lock have to set values 1 or 0
St plug
Deb proxy
Bl proxy
No need to use set 1 or set 0 (only for physical ports) otherwise use deb & bl
27. To autocreateCV
In RNC
& RBS
Get config
Cv ls (2 CVs will be used for the autocreate CV function)
Set proxy autoCreatedCVIsTurnedOn true/false
Set timeForAutoCreatedCV (UTC time)
Set timeForAutoCreatedCV 13:00 (cv autocreated at 9pm)
tg | grep -i kcc1bu
lh mod1 cell get 1/1/1/1/2/1.44 cellData
lookout for
, sac int 10 }
which states a wrong SAC value for the Utrancell
get utrancell=kcc1bu cid
(cid = SAC + sector number)
get serviceArea=284
to confirm SAC for the cell
31. To create CV
In RNC,RXI & RBS
cvms CXP9010373%1_R11G_050725_1516 emfauzi change_ntpserver_ip
cvms CXP9010373%1_R11G_050725_1516 followed by comments for the CV
cvset CXP9010373%1_R11G -- to set the CV startable
get servicearea=132
get locationarea
get routingarea
get externalutrancell LAC --> corresponding LAC changed at neighbour RNC (if defined)
set ExternalUtranCell=uefaMU_1 lac 12050
-->to change the externalutrancell LAC parameter for the
particular cell at another/neighbour RNC
get utrancell=uefa lac
--> to view externalutrancell LAC parameter at neighbour RNC
get utrancell=cinoMU_3
& node B
st plugin
st plugin 1 0
st plugin 0 1
lst plug 0
Get jumper
Get feeder
Get rbs xdl
In RBS
St ms-20-2
Check whether port locked or not pr the port number
Pr pp2 or pp7 (ETM1)
lst Slot=8.*Vc12Ttp=5$ (ETMC41, MS-8-5)
Get proxy and view admin state whether locked or not
Then do deblocking
Deb proxy
St proxy
Make sure port is deblocked (can also see in EMAS)
St atmport
Check port lock state
St pp
St pp2
st pp3
pr pp(port#)
st pp4
close logfile
Lgv
Lgaevsm rather long
vswr
vswr
vswr
pow
- sector 1
- sector 2
In RBS
49. redefine TD in VC
In RXI
In RBS
1210
1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Ssch=1
1211
1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Psch=1
1212
1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Pcpich=1
1213
1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Pccpch=1
1214
1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Pccpch=1,Bch=1
1215
1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Prach=1
1216
1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Prach=1,Rach=1
1217
1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Aich=1
1218
1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=2
1219
1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=2,Fach=1
1220
1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=2,Fach=2
1221
1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=1
1222
1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Sccpch=1,Pch=1
1223
1 (ENABLED) NodeBFunction=1,Sector=3,Carrier=1,Pich=1
1225
1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1
1227
1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Ssch=1
1228
1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Psch=1
1229
1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Pcpich=1
1230
1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Pccpch=1
1231
1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Pccpch=1,Bch=1
1232
1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Prach=1
1233
1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Prach=1,Rach=1
1234
1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Aich=1
1235
1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=2
1236
1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=2,Fach=1
1237
1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=2,Fach=2
1238
1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=1
1239
1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Sccpch=1,Pch=1
1240
1 (ENABLED) NodeBFunction=1,Sector=2,Carrier=1,Pich=1
1242
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1
1244
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Ssch=1
1245
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Psch=1
1246
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pcpich=1
1247
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pccpch=1
1248
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pccpch=1,Bch=1
1249
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=2
1250
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=2,Fach=1
1251
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=2,Fach=2
1252
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=1
1253
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=1,Pch=1
1254
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pich=1
1255
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Prach=1
1256
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Prach=1,Rach=1
1257
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Aich=1
===========================================================================
========
Total: 45 MOs
In node
RNC
pr iub pot3
to get RBSID or
get iublink rbsid 255
Pr iub *RBSID*
Get the proxy for the Aal0 - look for the name
RNCBESI01> get IubLink rbsid .8
RXI
pr .124
55. RBSID
In node
In node
RBS
Pr iub
Get the proxy NodeBFunction=1,Iub=POT3UU
RBSID seen
RNC
get iublink userlabel setomu
RBS
Lt manage
Lt mana
(also can)
1077 ManagedElementData=1
1078 SwManagement=1
get *ManagedElementData=1* proxy
look for logonServerAddress
if 10.125.7.201,10.125.7.202 --- then security OFF
if https://ckpgominf2:8443/ericsson/servlet/sls,https://ckpgominf3:8443/ericsson/servlet/sls ---- security ON
(1 means 1 db)
RNC
Lt rncmodule
Get rncmodule
Pr rncmodule (then get proxy oso can)
65. To check how many HSDPA users in a cell (must know CID)
In node RNC
dyncelldata cid 02301
RNCKPNG01> dyncelldata cid 02301
060425-10:51:23
Trying password from ipdatabase file: /home/emfauzi/moshell/sitefiles/ipdatabase...
$ dyncelldata cid 02301
cId: 2301
Cell froId: 65
CC SP: 011000/sp0.lnh/CommonChMainPT
rncModuleId: 4
IubLink froId: 22
Total ASE DL: 944
aseDlAdm: 240
beMarginAseDl: 100
Total ASE UL: 16748
aseUlAdm: 500
aseUlAdmOffset: 40
beMarginAseUl: 0
CPM RL Count: 0
compModeAdm: 15
HSDPA UE Count: 5
<------------------------- 5 user currently
hsdpaUsersAdm: 20
SF8 RL DL Count: 0
sf8Adm: 1
SF16 RL DL Count: 0
sf16Adm: 16
SF32 RL DL Count: 0
sf32Adm: 32
SF4 RL UL Count: 5
sf4AdmUl: 20
DL Code Allocation Level: 40.23 %
dlCodeAdm: 80 %
beMarginDlCode: 5
UL Interference: -105.2 dBm
Filtered DL Power: 23.44 %
pwrAdm: 75 %
pwrAdmOffset: 10 %
beMarginDlPwr: 10
Congestion State: Uncongested
$
(7 means 7 db)
RNC
get IubLink=Iub_MRT1BU (will show rbsID)
get iublink=iub_airtmu
get iublink rbsid (shows you all the RBSids in the RNC)
get iublink rbsid 255
if wanna change at RBS, roll back to sitecomplete CV, edit the sitecomplete script (only 2 places to change)
rbsId Integer 269 (@ lline 225) & a2ea String "601220050010269" (@ line 241)
router no need change at the RBSid should follow suit thus RBS IP may require change
In node
RNC
get allmmu_1 arf
typical values (uarfcnDl
10662 & uarfcnUl
9712 )
RBS
get antenna fq
typical values (fqBandHighEdge 10712 & fqBandLowEdge
10612)
thus if requested value at RNC is 10637 and if the value is between 10612 & 10712 at RBS, change only at RNC
RBS
Ls will show you are in drive D
To go to C drive:
cd /c
Go to java folder
Ls
and you will
ftp 10.78.....
Pw rbs
rbs
Bin
(make sure in Binary and not ASCII)
Cd /c
Cd java
Put host.p12
(ensure host.p12 file in moshell folder ya)
bye
RXI
pr atmcross.*23 (23 is the RBS ID)
4029 TransportNetwork=1,AtmCrossConnection=b23ia
4030 TransportNetwork=1,AtmCrossConnection=b23ib
4031 TransportNetwork=1,AtmCrossConnection=b23sa1
4032 TransportNetwork=1,AtmCrossConnection=b23sb1
4033 TransportNetwork=1,AtmCrossConnection=b23ca
4034 TransportNetwork=1,AtmCrossConnection=b23cb
4035 TransportNetwork=1,AtmCrossConnection=b23da
4036 TransportNetwork=1,AtmCrossConnection=b23db
lget 4029
AtmCrossConnectionId
b23ia
operationalState
1 (ENABLED)
userLabel
vclTpAId
AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc2332
vclTpBId
AtmPort=MS-10-4,VplTp=vp1,VpcTp=1,VclTp=vc32
acc AtmPort=MS-10-4,VplTp=vp1,VpcTp=1,VclTp=vc32 eteloopback
2855 TransportNetwork=1,AtmPort=MS-10-4,VplTp=vp1,VpcTp=1,VclTp=vc32
acc 2855 eteloopback
Are you Sure [y/n] ? y
2855 AtmPort=MS-10-4,VplTp=vp1,VpcTp=1,VclTp=vc32
eteLoopBack
>>> Return value = true ----- OK
In node
RNC
pr atmcross.*23 (23 is the RBS ID)
4029 TransportNetwork=1,AtmCrossConnection=b23ia
4030 TransportNetwork=1,AtmCrossConnection=b23ib
In node ATMCC
pr atmcross.*friq
RNC,RXI,ATMCC
pr configuration
4029 TransportNetwork=1,AtmCrossConnection=b23ia
4030 TransportNetwork=1,AtmCrossConnection=b23ib
CREATE
(
parent "ManagedElement=1,TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1"
identity "vc12232"
moType VclTp
exception none
nrOfAttributes 3
userLabel String "VclTp vc12232"
externalVci Integer 12232
atmTrafficDescriptorId Ref "ManagedElement=1,TransportNetwork=1,AtmTrafficDescriptor=U4"
)
CREATE
(
parent "ManagedElement=1,TransportNetwork=1"
identity "bCSSQBUib"
moType AtmCrossConnection
exception none
nrOfAttributes 3
userLabel String "AtmCrossConnection bCSSQBUib"
vclTpAId Ref "ManagedElement=1,TransportNetwork=1,AtmPort=MS-271,VplTp=vp1,VpcTp=1,VclTp=vc12232"
vclTpBId Ref "ManagedElement=1,TransportNetwork=1,AtmPort=MS-252,VplTp=vp1,VpcTp=1,VclTp=vc12233"
)
76.
RBS
UEFAMU> pr carrier que
060615-14:50:24 10.78.71.129 6.1zc RBS_NODE_MODEL_H_6_2
======================================================================
=============
Proxy MO
======================================================================
=============
1381 NodeBFunction=1,Sector=3,Carrier=1
1399 NodeBFunction=1,Sector=2,Carrier=1
1417 NodeBFunction=1,Sector=1,Carrier=1
==============================================================================
=====
Are you Sure [y/n] ? y
==============================================================================
Id MO
queueselectalgorithm Result
==============================================================================
1417 Sector=1,Carrier=1
0
>>> Set.
==============================================================================
Total: 1 MOs attempted, 1 MOs set
UEFAMU> get 1417 que
060615-14:51:29 10.78.71.129 6.1zc RBS_NODE_MODEL_H_6_2
==============================================================================
MO
Attribute
Value
==============================================================================
Sector=1,Carrier=1
frequencyPlane 1
Sector=1,Carrier=1
queueSelectAlgorithm 0 (ROUND_ROBIN)
==============================================================================
Total: 1 MOs
For cqiAdjustmentOn
lset carrier cqiAdjustmentOn true --- only can work
lset carrier cqiAdjustmentOn 1 -- cannot
Get IUB
RNC
RNCSHTI01> get tubo cell
060626-18:15:50 10.78.192.1 6.1zc RNC_NODE_MODEL_F_4_3
======================================================================
===========================================
MO
Attribute
Value
======================================================================
===========================================
UtranCell=TUBOMU_3
UtranCellId
TUBOMU_3
UtranCell=TUBOMU_3
cellReserved
1 (NOT_RESERVED)
UtranCell=TUBOMU_3
localCellId
3
UtranCell=TUBOMU_3
tCell
3
UtranCell=TUBOMU_3
utranCellPosition i[0] =
UtranCell=TUBOMU_3,UtranRelation=TUBOMU_2
utranCellRef
UtranCell=TUBOMU_2
UtranCell=TUBOMU_3,UtranRelation=TUBOMU_1
utranCellRef
UtranCell=TUBOMU_1
UtranCell=TUBOMU_2
UtranCellId
TUBOMU_2
UtranCell=TUBOMU_2
cellReserved
1 (NOT_RESERVED)
UtranCell=TUBOMU_2
localCellId
2
UtranCell=TUBOMU_2
tCell
2
UtranCell=TUBOMU_2
utranCellPosition i[0] =
UtranCell=TUBOMU_2,UtranRelation=TUBOMU_3
utranCellRef
UtranCell=TUBOMU_3
UtranCell=TUBOMU_2,UtranRelation=TUBOMU_1
utranCellRef
UtranCell=TUBOMU_1
UtranCell=TUBOMU_1
UtranCellId
TUBOMU_1
UtranCell=TUBOMU_1
cellReserved
1 (NOT_RESERVED)
UtranCell=TUBOMU_1
localCellId
1
UtranCell=TUBOMU_1
tCell
1
UtranCell=TUBOMU_1
utranCellPosition i[0] =
UtranCell=TUBOMU_1,UtranRelation=TUBOMU_3
utranCellRef
UtranCell=TUBOMU_3
UtranCell=TUBOMU_1,UtranRelation=TUBOMU_2
utranCellRef
UtranCell=TUBOMU_2
======================================================================
===========================================
Total: 9 MOs
cellReserved
1 (NOT_RESERVED) ------ can make call
In node
RNC
get jltg rbsid
RXI
Lst .b(rbs ID)
Get proxy . Can see which MS port
lk UniSaalTp=b124qa
(124=rbsID)
st ms-10-52|ms-10-53
lst slot=10.*53
lst slot=10.*53|slot=10.*52
NBAP AAL5,
84. To check RBS ID
In node RNC
nodesynchTP AAL-0
Pr .267
In node
RNC
get iublink=iub_airtmu
Will show you the RBSID
lpr AtmCrossConnection=b208
get proxy
see 1 or 101 - will tell you which RXI to look at
RXI
get iublink=iub_airtmu
get ExternalGsmCell=RNB1B1_0
Confbl
93. Why GPB will not load up when put into Subrack
In node
RNC
Stop all java module
Pglist e
You will get the jvm handler (number)
Pgkill [handler] -- restarts the jvm
RBS
Open EMAS
Go to SoftwareAllocation
Right click, Add
Choose the specific board/ swallocation
- fact is it will create a SWallocation ID = 1 in the rbs
Use moshell to create an Undo file
U+
Then delete the swallocation
Lt swalloc
Pr swalloc
Del proxy
UThen edit the undo file
RBS
te enable bus_send bus_receive NBAP*
te s Ans* (just to look at the last line)
te enable bus_send bus_receive Ans_aal2ap_proc
te log read | decoder.pl | tee SCO1BU.log | flow.pl colour
to place it in a log ---
te log read | decoder.pl | tee SCO1BU.log | flow.pl colour
logs will be at /ethanap
RNC
get IubLink=Iub_SCO1BU
get RncModule=6 -- to see which RBS in module, 6 being module number
or
get IubLink rncModuleRef RncModule=6 (cekap way)
get iublink rncModuleRef RncModule=10
get ReliableProgramUniter=rnc_cell_6
admActiveSlot
Subrack=ES-2,Slot=14
admPassiveSlot
Subrack=ES-2,Slot=16
In node
In node
RXI
get aal2pathvcc. Pathid
get aal2pathvcc.*b232 pathid --- cannot use
get Aal2PathVccTp.b*232 pathid --- can
In node
TeraTerm
User = eric
Pw = ericsson
Monitor 10.78.xx.xx
RBS
N
Mon?
TargetMonitor on disk: Yes
TargetMonitor loaded: No
TargetMonitor started: No
Mon+
te status Ans*
to on NBAP trace
te enable bus_send bus_receive NBAP
to see if NBAP trace is ON or NOT
te status NBAP
$ te status NBAP
pid name
enabled groups
- NBAP
check error info bus_send bus_receive interface object
To disable ---
te disable bus_send bus_receive NBAP
Check status again
$ te status NBAP
pid name
enabled groups
- NBAP
check error info interface object
100.
In node RNC
Pr VP
Get proxy for particular VP
101.
In node RXI
lget Atmport=ms-8.*vc32 reservedBy
then lget .0105 -- userlabel usually empty (not filled)
102.
To check external Open Door alarm in RBS is set to which probable cause
In node
103.
In node
104.
RBS
Pr almdevice
Get proxy (either 2 / 1 or 9)
Usually 9 for RBS door and 2 for BBU door
Some put 1 for BBU door
Get proxy for parameter check
Lock proxy to change probableCause
Bl 54
probableCause 522 power supply
probableCause 118 enclosure_door_open_m3100
set 54 probableCause 118
then unlock back proxy
deb 54
RBS
Lpr ret
Acl proxy
253 Equipment=1,SectorAntenna=3,AuxPlugInUnit=2,RetuDeviceGroup=1,RetDeviceSet=1,RetDevice=1
acc 267 forceCalibration
alarm will go away in 2 minutes approx
In node
105.
106.
In node
107.
In node
108.
RXI
lpr ms-12-63
lpget AtmPort=MS-12-63,VplTp=vp1,VpcTp=1,VclTp=vc32 --- RXI to node B (RBS uses MS-12-63)
pr .153
lpget AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc15332 -- RXI to RNC (RBS ID= 153)
RNC,RXI,RBS
lacc AtmPort=1-1-1,VplTp=vp2,VpcTp=1,VclTp=vc32 eteloopback
Yes
False fail,
true - pass
In node RNC
109.
get antenna fq
110.
To check space in HD
In node
Cabd
vols
111.
In node
112.
RXI
lpr AtmPort=MS-17-7
Look out for ---- reservedBy
Aal5TpVccTp=b0093qb
RBS ID = 93
lpr .b0093
get
2993 TransportNetwork=1,AtmCrossConnection=b0093ca
hopefully got userlabel to refer to userLabel
AtmCrossConnection bISM1BUca
To check
In node RNC
113.
To check
In node RNC
114.
To check
In node RNC
115.
To check
In node RNC
116.
To check
In node RNC
117.
To check
In node RNC
118.
To check
In node RNC
119.
To check
In node RNC
120.
To check
In node RNC
121.
To check
In node RNC
122.
To check
In node RNC
123.
To check
In node RNC
124.
To check
In node RNC
125.
To check
In node RNC
126.
To check
In node RNC
127.
To check
In node RNC
128.
To check
In node RNC
129.
To check
In node RNC
130.
To check
In node RNC