This document provides instructions for operating an Equipment Management Monitoring System (EMMS). It summarizes:
- How to access maintenance, error code, and user adjustment functions by using display keys in different positions
- What various maintenance, error code, and clinic items are and how to view their status
- How to reset maintenance intervals, view and erase error codes, and adjust display settings
- Tables of error and monitoring codes that can be accessed by entering numbers
This document provides instructions for operating an Equipment Management Monitoring System (EMMS). It summarizes:
- How to access maintenance, error code, and user adjustment functions by using display keys in different positions
- What various maintenance, error code, and clinic items are and how to view their status
- How to reset maintenance intervals, view and erase error codes, and adjust display settings
- Tables of error and monitoring codes that can be accessed by entering numbers
This document provides instructions for operating an Equipment Management Monitoring System (EMMS). It summarizes:
- How to access maintenance, error code, and user adjustment functions by using display keys in different positions
- What various maintenance, error code, and clinic items are and how to view their status
- How to reset maintenance intervals, view and erase error codes, and adjust display settings
- Tables of error and monitoring codes that can be accessed by entering numbers
This document provides instructions for operating an Equipment Management Monitoring System (EMMS). It summarizes:
- How to access maintenance, error code, and user adjustment functions by using display keys in different positions
- What various maintenance, error code, and clinic items are and how to view their status
- How to reset maintenance intervals, view and erase error codes, and adjust display settings
- Tables of error and monitoring codes that can be accessed by entering numbers
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 12
WARNING: Use this CARD as Reference only (Training aid)! SEPB201301 Read the Operations Manual before operating!
Service Technology Development Group Customer Support Division EMMS: Equipment Management Monitoring System
< >
- Moves Left - Moves Right - Selects Mode - Cancels Mode
- Maintenance Mode Functions -
> Ignition key must switched to the "ON" position and the machine must be in the "PARK" mode in order to allow access to the functions on the monitor display. When using the Select Mode to access menu, the switch must be held in the <> position at least 3 to 4 seconds in order to access menu functions in the Operator Mode.
The maintenance interval is re-set and the monitor display returns to the maintenance item chosen.
NO
enter
No action is taken. The maintenance item is not re-set and the monitor display returns to the maintenance item chosen.
NO
enter
- PM Clinic Functions -
An Action Code will automatically be displayed when a serious fault occurs in the system. There are 4 Action Codes.
>
E01 -Only action code is displayed E02 -Only action code is displayed E03 CALL+ action code is displayed E04 CALL+ action code is displayed < >
<
No. 1 2 3 4
Pm clinic auxiliary item 01-ENG. SPEED Engine speed 02-BATTERY VOLT Battery voltage 03-HST TEMP ? 04-VEHICLE SPEED ?
Unit rpm mV C km/h
Scroll through the menu
or
After selecting the system to be monitored from the menu shown above, you can take a snap-shot of a time frame within that system.
E01 -Only action code is displayed
By using the select mode function you can capture and hold a time frame within a systems. An H will appear on the left of the screen and all monitored movement will hold until canceled. Select and hold H Cancel hold Exit function
- Error Code Functions -
E02 -code ONLY is displayed
-Caution lamp flashes -Caution buzzer sounds Contents of Fault:
>
<
Remedy: Stop engine and restart machine Stop ! Call your Komatsu dealer
E03 -Action code is displayed
-Caution lamp flashes -Caution buzzer sounds -HST Speed limit = 50% km/h Contents of Fault:
If a problem is detected in the operating systems, the monitor read-out will display one of two indications. These would be a display with the words !!ERROR CODE!! This is usually followed by an audible warning as well as a separate indication elsewhere. The other display would be the actual FAULT CODE display listing for the system with a problem. This is usually indicated by a six digit display specifically for the system with the problem. The monitor is capable of sorting 20 items, each will be displayed automatically every two seconds in the order of occurrence.
- User Adjust Functions -
>
Remedy: Move to a safe location and shut machine down immediately Stop ! Call your Komatsu dealer
Adjustment item Brightness of LCD Brightness of dis play Contrast of display
Unit % % %
<
Scroll through the menu
> > Decrease intensity Increase intensity
E04 -Action code is displayed
-Caution lamp flashes -Caution buzzer sounds -HST STOPS! Park BRAKE Locks! Contents of Fault:
or
<
After selecting desired brightness or contrast The mode is now set, and can be changed
Remedy: Shut machine down immediately Movement NOT possible! Stop ! Call your Komatsu dealer
ERROR CODE TABLE (1/3)
ERROR CODE TABLE (2/3)
ERROR CODE TABLE (3/3)
WARNING: Use this CARD as Reference only (Training aid)! Read the Operations Manual before operating! EMMS: Equipment Management Monitoring System
< >
- Moves Left - Moves Right - Selects Mode - Cancels Mode
Ignition key must switched to the "ON" position and the machine must be in the "PARK" mode in order to allow access to the functions on the monitor display when in the Service Mode.
Normal Normal Monitor Monitor Display Display Key Key "ON" "ON"
To access Service Mode, hold toggle switch in Down" position together with the Select Mode switch for 6 to 8 seconds. Down w/out Key = SMR read.
Under EMMS Monitor switch
Replacement interval time 1st time 2nd time and after (Cannot be changed) (Can be changed) Engine oil 0500h 0500h Engine oil filter 0500h 0500h Fuel filter 0500h 0500h Hydraulic oil filter 2000h 2000h Corrosion resistor ? ? Bypass filter ? ? Damper oil ? ? Final drive oil 1000h 1000h Hydraulic oil 2000h 2000h Power train oil ? ? Power train oil filter ? ? HST charge filter (HST specific 2000h 2000h
< Held Down
Scroll through the menu
>
or
To change time interval UP (increases numeric value) DOWN (decreases numeric value) Cursor location
You have two options in this mode: 1. Re-set the maintenance time interval. 2. Cancel systems operation
If you do not use the maintenance function
< Move Left No setting or
> Move Right Set values at zero, maintenance alert will not be used and no warning will be set in system
Maintenance time interval is chanced
Value out of range, try again
To display all codes, use Left, Right feature. Up to 20 codes can be recorded and displayed. Codes are stored in order of oldest to the newest. A flashing code means the fault is currently happening. Erase all codes in system
Previous code (Left)
<
>
Next code (Right)
UP (erases codes) If a code cannot be erased, this is an indication the electrical problem has not been repaired and is continuing to re-occur. Exit system No Action DOWN (erases codes)
CAUTION!
To display all codes, use Left, Right feature. Up to 6 codes can be recorded and displayed. Codes are stored in order of oldest to the newest. A flashing code means the fault is currently happening. No codes in system
Previous code (Left)
<
>
Next code (Right)
Mechanical system error codes cannot be deleted Exit system No Action
Record number (Up to 6 Codes) Time measure after first occurrence Time measured after last occurrence Number of past occurrences
Read-out Explanation
By using the Shift-up and Shift-down buttons you can scroll through the numbers to enter the code for the item you select. By using the < > feature you can position the cursor on a digit.
Adjustment item INP TEL NO. M-CODE BODY TYPE BRAKE N-SET SMR SET S/T H.L-SET S/T H.R-SET S/T N-SET S/T M.L-SET S/T M.R-SET PUMP AJST F PUMP AJST R PU F-UP MAP PU R-UP MAP PU F-HF MAP PU R-HF MAP BRAKE END ENG HI-SET DECEL HI>LO THROTTLE LO STALL CHECK SHIFT LIMIT
Once a code is entered, items A, B, C can be accessed by simply scrolling through the menu listed above.
<
>
To set a function
Function will be set if system allows access
No. 1 2 3
Displayed information 01-1000 rpm SMR 1,000rpm service meter 02-FOWARD ODO M Forward odometer 03-REVERCE ODO M Reverse odometer
Unit 0.1h m m
Read only, cannot be reset
< Read only, cannot be reset
Scroll through menu
> Read only, cannot be reset
Setting Numbers UP (increase numbers)
See Monitoring Code Table for a list of system codes After entering the item number code Exit System
DOWN (decrease numbers)
< Previous number (Left)
> Next number (Right)
In this mode you can read a systems function by simply entering an access code. Once in the system you can scroll through other systems.
By using the select mode function you can capture and hold a time frame within a systems. An H will appear on the left of the screen and all monitored movement will hold until canceled. Select and hold H Cancel hold Exit function
Setting Numbers UP (increase numbers) See Monitoring Code Table for a list of system codes DOWN (decrease numbers) Exit System After entering the item numbers code
< Previous number (Left)
> Next number (Right)
In this mode you can view two systems functions at the same time by simply entering two access code.
