User's Manual: CNPS9700 / 9500A LED

Users Manual
www.ZALMAN.com
Ver.130227
To ensure safe and easy installation, please read the following precautions.
CNPS9700 / 9500A LED
Intel Socket 1155/1156/775 CPUs
AMD Socket FM2/FM1/AM3+/AM3/AM2+/AM2 CPU & APUs
1
.COM
2. Specifcations
1. Precautions
1) Use and keep product away from reach of children and pets.
2) Do not ingest the Thermal Grease, and avoid its contact with skin and
eyes. If contact is made with skin, wash off with water. If ingested or
irritation persists, seek medical attention.
3) To prevent possible injuries, gloves must be worn while handling this
product.
4) Excessive force exerted on the fan may cause damage to the fan and/
or system.
5) Avoid inserting objects or hands into the fan while it is in operation to
prevent product damage and injuries.
6) Check the components list and condition of the product before
installation. If any problem is found, contact the retailer to obtain a
replacement.
7) Zalman Tech Co., Ltd. is not responsible for any damages due to
overclocking.
8) During transportation of the system, the cooler must be removed.
Zalman is not responsible for any damages that occur during the
transport of a system.
9) Product design and specifications may be revised to improve quality
and performance.
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due
to external causes, including but not limited to, improper use,
problems with electrical power, accident, neglect, alteration,
repair, improper installation, or improper testing.
Model
Spec.
CNPS9700 LED CNPS9500A LED
Material Pure Copper, Aluminum Pure Copper
Weight 764g 530g
Dimensions 90(L) 124(W) 142(H) 85(L) 112(W) 125(H)
Fan
Bearing-Type 2 Ball-Bearing 2 Ball-Bearing
RPM 1,250 ~ 2,800rpm 10% 1,350 ~ 2,600rpm 10%
Noise Level 19.5 ~ 35dBA 10% 18.5 ~ 27.5dBA 10%
Input Voltage 12V 12V
Fan
Mate 2
Output Voltage 5 ~ 11V 2% 5 ~ 11V 2%
Maximum Capacity 6W or lower 6W or lower
2
.COM
1) Common Components
3. Components
Clip Support Fixing Bolts
AMD Clip Lever AMD Clip
Clip Support
Users Manual
Washers
Nuts
Intel Clip
Clip Fixing Bolts
Cooler
2) Intel Components
3) AMD Components
Fan Mate 2 Cable Fan Mate 2 Double-Sided Tape
CNPS9500
Thermal Grease
CNPS9700
Thermal Grease
3
.COM
4. Installation Requirements
1) Space Requirements
2) Air Guide Removal
3) Cooler Orientation
The coolers installation requires unobstructed space with dimensions of
CNPS9700 LED : 127mm(width), 93mm(length), 145mm(height)
CNPS9500A LED : 115mm(width), 88mm(length), 128mm(height)
, and the CPU as a central reference point. Please check if components such as
ODDs and PSU protrude into the required space.
Air guides on enclosures must be removed, before the coolers installation, for
they protrude into the coolers required space.
It is recommended that the cooler be installed so that air fows from the cooler toward
the enclosures rear exhaust fan.
Length
Height
Width
PSU
4
.COM
4) Installation Based On Clip Orientation
A. Horizontal Clip Orientation
B. Vertical Clip Orientation
5
.COM
CNPS9700 LED - Remove any foreign particles from the Base of the the
cooler and the surface of the CPU, then shake well the enclosed thermal
grease and apply a through layer of thermal grease on the surface of the
CPU and the Base of the cooler.
1) Intel Socket 1155 / 1156 / 775 Installation
Install the Clip Support to the motherboard according to the socket-type.
5. Installation
Nut
Washer
Bolt(silver)
Clip Support
M
/
B
Socket 1155 / 1156
Socket 775
Please make note of the Lever Slots direction when
installing the Clip Support.
Caution
Lever
Slot
CNPS9500A LED - Clear off any particles or residue from the CPUs surface
then spread a thorough layer of Thermal Grease on the CPU and the base of
the cooler.
6
.COM
Refer to Section 6 Fan Mate 2 Installation and Usage for instructions on
power connection.
Insert a Bolt into both ends of the Intel Clip, then screw each Bolt a little
at a time, alternating between each Bolt, until the Clip is fully installed.
2) AMD Socket FM2 / FM1 / AM3+ / AM3 / AM2+ / AM2 Installation
Remove any foreign particles from the Base of the the cooler and the
surface of the CPU, then shake well the enclosed thermal grease and
apply a through layer of thermal grease on the surface of the CPU and
the Base of the cooler.
For installations with horizontal
Clip orientation, please be
cautious to not exert excessive
force on the fan while using a
screwdrivers to install the Clip.
Caution
CNPS9500A LED - Clear off any particles or residue from the CPUs surface
then spread a thorough layer of Thermal Grease on the CPU and the base of
the cooler.
7
.COM
Refer to Section 6 Fan Mate 2 Installation and Usage for instructions on
power connection.
Connect Fan Mate 2 between the
Fan Cable and the motherboard
as shown in the diagram below.
Fan Mate 2 can be installed on the
side of the case using Double-Sided
Tape.
M
/
B
Fan Connector (Cooler)
Double-Sided Tape
6. Fan Mate 2 Installation and Usage
1) Fan Mate 2 Installation
Insert the AMD Clip Lever into the AMD Clips Clip Lever Slot, then hook
the opposite end on its Lug, press down on the Clip Lever and hook it
onto its Lug.
Lug
8
.COM
2) Fan Mate 2 Operation
Adjust the Fan Speed Control
Knob for RPM control.
Fan Speed Control Knob
In the case that you get a BIOS error beep:
Rotate the Fan Speed Control Knob clockwise to the maximum setting.
Disable CPU Fan Detected in BIOS setting or set the system monitoring
programs CPU Fan RPM to the lowest setting.
Certain motherboards will not boot if the CPU fans RPM is not detected. In this
case inquire to the motherboards manufacturer for additional details.
BIOS Booting Error

User's Manual: CNPS9700 / 9500A LED

Uploaded by

Copyright:

Available Formats

User's Manual: CNPS9700 / 9500A LED

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

User's Manual: CNPS9700 / 9500A LED

Uploaded by

Copyright:

Available Formats

Users Manual

You might also like