50% found this document useful (2 votes)

765 views

Module 4 - Spreadsheets (Excel)

Uploaded by

mizo2089

Available Formats

Download as PDF, TXT or read online on Scribd

50% found this document useful (2 votes)

765 views

Module 4 - Spreadsheets (Excel)

Uploaded by

mizo2089

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 86

ECDL Module 4

REFERENCE MANUAL
Spreadsheets
Microsoft Excel XP Edition for ECDL Syllabus Four
PAGE 2 - ECDL MODULE 4 (USING OFFICE XP) - MANUAL

© 1995-2005 Cheltenham Courseware Ltd.

Crescent House
24 Lansdown Crescent Lane
Cheltenham
Gloucestershire
GL50 2LD, UK
Tel: +44 (0)1242 227200
Fax: +44 (0)1242 253200
Email: info@cheltenhamcourseware.com
Internet: http://www.cheltenhamcourseware.com

All trademarks acknowledged. E&OE.

© Cheltenham Courseware Ltd. 1995-2005 No part of this document may be copied without written permission from
Cheltenham Courseware unless produced under the terms of a courseware site license agreement with Cheltenham
Courseware.

All reasonable precautions have been taken in the preparation of this document, including both technical and non-technical
proofing. Cheltenham Courseware and all staff assume no responsibility for any errors or omissions. No warranties are made,
expressed or implied with regard to these notes. Cheltenham Courseware shall not be responsible for any direct, incidental or
consequential damages arising from the use of any material contained in this document. If you find any errors in these training
modules, please inform Cheltenham Courseware. Whilst every effort is made to eradicate typing or technical mistakes, we
apologise for any errors you may detect. All courses are updated on a regular basis, so your feedback is both valued by us and
will help us to maintain the highest possible standards.

Sample versions of courseware from Cheltenham Courseware

(Normally supplied in Adobe Acrobat format)
If the version of courseware that you are viewing is marked as NOT FOR TRAINING, SAMPLE, or similar, then it cannot be
used as part of a training course, and is made available purely for content and style review. This is to give you the opportunity
to preview our courseware, prior to making a purchasing decision. Sample versions may not be re-sold to a third party.

For current license information

Cheltenham Courseware reserves the right to alter the licensing conditions at any time, without prior notice. No terms or
conditions will affect your rights as defined under UK law. Please see the site license agreement available at:
www.cheltenhamcourseware.com/agreement

PLEASE NOTE: Web sites listed or illustrated within this document are purely for illustrative purposes
and their inclusion does not imply endorsement by the authors or suppliers of this document. No
company or organisation has paid to have their web sites or other information included within this
document.

FOR USE AT THE LICENSED SITE(S) ONLY

ECDL Approved Courseware

IMPORTANT - PLEASE READ
As a condition of providing official approval for this courseware, the ECDL
Foundation demand that the following statement appear within all approved ECDL
courseware, produced by third party courseware providers: -

""European Computer Driving Licence" and ECDL and Stars device are registered trade marks of the European
Computer Driving Licence Foundation Limited in Ireland and other countries. Cheltenham Courseware Ltd is an
independent entity from the European Computer Driving Licence Foundation Limited, and not affiliated with the
European Computer Driving Licence Foundation Limited in any manner. ‘Cheltenham Courseware Ltd ECDL
Courseware’ may be used in assisting students to prepare for the European Computer Driving Licence
Examination. Neither the European Computer Driving Licence Foundation Limited nor Cheltenham Courseware
Ltd warrants that the use of this ‘Cheltenham Courseware Ltd ECDL Courseware’ will ensure passing the
relevant Examination. Use of the ECDL-F approved Courseware Logo on this product signifies that it has been
independently reviewed and approved in complying with the following standards:

Acceptable coverage of all courseware content related to the ECDL Syllabus Version 4.0. This courseware
material has not been reviewed for technical accuracy and does not guarantee that the end user will pass the
associated ECDL Examinations. Any and all assessment tests and/or performance based exercises contained in
this ‘Cheltenham Courseware Ltd ECDL Courseware’ relate solely to this ‘Cheltenham Courseware Ltd ECDL
Courseware’ and do not constitute, or imply, certification by the European Driving Licence Foundation in respect
of any ECDL Examinations. For details on sitting ECDL Examinations in your country please contact the local
ECDL Licensee or visit the European Computer Driving Licence Foundation Limited web site at
http://www.ecdl.com.

“Candidates using this courseware material should have a valid ECDL/ICDL Skills Card/Log book. Without such a
skills card/Log book no ECDL/ICDL tests can be taken, no ECDL/ICDL certificate, nor any other form of
recognition can be given to the candidate. ECDL/ICDL Skills Cards may be obtained from any accredited
ECDL/ICDL Test Centre or from your country's National ECDL/ICDL designated Licensee".

References to the European Computer Driving Licence (ECDL) include the International Computer Driving
Licence (ICDL). ECDL Syllabus Version 4.0 is published as the official syllabus for use within the European
Computer Driving Licence (ECDL) and International Computer Driving Licence (ICDL) certification programme."

IMPORTANT: - Regarding ECDL courseware purchased from Cheltenham Courseware

Ltd. Cheltenham Courseware Ltd accept no liability whatsoever arising from any
changes which you make to this courseware, with, or without, ECDL Foundation
approval.

FOR USE AT THE LICENSED SITE(S) ONLY

4.1 USING THE APPLICATION........................................................................................................................ 6

4.1.1 FIRST STEPS WITH SPREADSHEETS ........................................................................................................ 6
4.1.1.1 Open (and close) a spreadsheet application. ............................................................................ 6
4.1.1.2 Open one, several spreadsheets................................................................................................. 6
4.1.1.3 Create a new spreadsheet (default template). .......................................................................... 8
4.1.1.4 Save a spreadsheet to a location on a drive.............................................................................. 9
4.1.1.5 Save a spreadsheet under another name.................................................................................. 9
4.1.1.6 Save a spreadsheet in another file type such as: text file, HTML, template, software
specific file extension, version number. ................................................................................................. 10
4.1.1.7 Switch between worksheets, open spreadsheets................................................................... 13
4.1.1.8 Use available Help functions...................................................................................................... 13
4.1.1.9 Close a spreadsheet. .................................................................................................................. 15
4.1.2 ADJUST SETTINGS .................................................................................................................................. 16
4.1.2.1 Use magnification/zoom tool. ..................................................................................................... 16
4.1.2.2 Display or hide built-in toolbars.................................................................................................. 16
4.1.2.3 Freeze, unfreeze row and/or column titles............................................................................... 16
4.1.2.4 Modify basic options/preferences in the application: user name, default directory/ folder to
open, save spreadsheets......................................................................................................................... 17
4.2 CELLS .......................................................................................................................................................... 19
4.2.1 INSERT DATA .......................................................................................................................................... 19
4.2.1.1 Enter a number, a date, text in a cell. ....................................................................................... 19
4.2.2 SELECT CELLS ....................................................................................................................................... 19
4.2.3.1 Select a cell, range of adjacent cells, range of non-adjacent cells, entire worksheet. ...... 19
4.2.2.2 Select a row, range of adjacent rows, range of non-adjacent rows. .................................... 21
4.2.2.3 Select a column, range of adjacent columns, range of non-adjacent columns. ................. 21
4.2.3 ROWS AND COLUMNS............................................................................................................................. 22
4.2.3.1 Insert rows, columns in a worksheet......................................................................................... 22
4.2.3.2 Delete rows and columns in a worksheet................................................................................. 23
4.2.3.3 Modify column widths and row heights..................................................................................... 23
4.2.4 EDIT DATA .............................................................................................................................................. 24
4.2.4.1 Insert additional cell content, replace existing cell content.................................................... 24
4.2.4.2 Use the undo, redo command.................................................................................................... 25
4.2.5 DUPLICATE, MOVE, DELETE................................................................................................................... 25
4.2.5.1 Duplicate the content of a cell, cell range within a worksheet, between worksheets,
between open spreadsheets. .................................................................................................................. 26
4.2.5.2 Use the autofill tool/copy handle tool to copy, increment data entries................................. 27
4.2.5.3 Move cell range contents, entire row(s), entire column(s) within a worksheet, between
worksheets, between open spreadsheets. ............................................................................................ 28
4.2.5.4 Delete cell contents. .................................................................................................................... 29
4.2.6 SEARCH AND REPLACE .......................................................................................................................... 30
4.2.6.1 Use the search command for specific content in a worksheet.............................................. 30
4.2.6.2 Use the replace command for specific content in a worksheet............................................. 31
4.2.7 SORT DATA............................................................................................................................................. 31
4.2.7.1 Sort a cell range by one criterion in ascending, descending numeric order, ascending,
descending alphabetic order. .................................................................................................................. 31
4.3 WORKSHEETS........................................................................................................................................... 33
4.3.1 HANDLING WORKSHEETS ....................................................................................................................... 33
4.3.1.1 Insert a new worksheet. .............................................................................................................. 33
4.3.1.2 Rename a worksheet. ................................................................................................................. 34
4.3.1.3 Delete a worksheet. ..................................................................................................................... 34
4.3.1.4 Duplicate a worksheet within a spreadsheet or between open spreadsheets.................... 35
4.3.1.5 Move a worksheet within a spreadsheet or between open spreadsheets........................... 37
4.4 FORMULAS AND FUNCTIONS............................................................................................................... 40
4.4.1 ARITHMETIC FORMULAS ......................................................................................................................... 40

FOR USE AT THE LICENSED SITE(S) ONLY

4.4.1.1 Generate formulas using cell references and arithmetic operators (addition, subtraction,
multiplication, division). ............................................................................................................................ 40
4.4.2.1 Recognise and understand standard error values associated with using formulas........... 41
4.4.2 CELL REFERENCING ............................................................................................................................... 44
4.4.2.1 Understand and use relative, mixed, absolute cell referencing in formulas........................ 44
4.4.3 WORKING WITH FUNCTIONS ................................................................................................................... 46
4.4.3.1 Generate formulas using sum, average, minimum, maximum, count, functions................ 47
4.4.3.2 Generate formulas using the logical function if (yielding one of two specified values)...... 52
4.5 FORMATTING............................................................................................................................................. 56
4.5.1 NUMBERS/DATES ................................................................................................................................... 56
4.5.1.1 Format cells to display numbers to a specific number of decimal places, to display
numbers with, without commas to indicate thousands. ....................................................................... 56
4.5.1.2 Format cells to display a date style. .......................................................................................... 57
4.5.1.3 Format cells to display a currency symbol. .............................................................................. 58
4.5.1.4 Format cells to display numbers as percentages.................................................................... 58
4.5.2 CONTENTS .............................................................................................................................................. 60
4.5.2.1 Change cell content appearance: font sizes, font types. ....................................................... 60
4.5.2.2 Apply formatting to cell contents such as: bold, italic, underline, double underline. .......... 60
4.5.2.3 Apply different colours to cell content, cell background. ........................................................ 62
4.5.2.4 Copy the formatting from a cell, cell range to another cell, cell range. ................................ 63
4.4.2.5 Apply text wrapping to contents within a cell. .......................................................................... 63
4.5.3 ALIGNMENT BORDER EFFECTS .............................................................................................................. 64
4.5.3.1 Align contents in a cell range: left, centre, right; top and, bottom......................................... 64
4.5.3.2 Centre a title over a cell range................................................................................................... 65
4.5.3.3 Adjust cell content orientation. ................................................................................................... 66
4.5.3.4 Add border effects to a cell, cell range. .................................................................................... 66
4.6 CHARTS / GRAPHS .................................................................................................................................. 69
4.6.1 USING CHARTS/GRAPHS ........................................................................................................................ 69
4.6.1.1 Create different types of charts/graphs from spreadsheet data: column chart, bar chart,
line chart, pie chart.................................................................................................................................... 69
4.6.1.2 Add a title or label to a chart/graph. Remove a title or label from a chart/graph. ............... 71
4.6.1.3 Change the background colour in a chart/graph. .................................................................... 72
4.6.1.4 Change the column, bar, line, pie slice colours in a chart/graph. ......................................... 73
4.6.1.5 Change the chart/graph type...................................................................................................... 74
4.6.1.6 Duplicate, move charts/graphs within a worksheet, between open spreadsheets. ........... 75
4.6.1.7 Resize, delete charts/graphs...................................................................................................... 76
4.7 PREPARE OUTPUTS ................................................................................................................................ 78
4.7.1 WORKSHEET SETUP ............................................................................................................................... 78
4.7.1.1 Change worksheet margins: top, bottom, left, right ................................................................ 78
4.7.1.2 Change worksheet orientation: portrait, landscape. Change paper size............................. 78
4.7.1.3 Adjust page setup to fit worksheet contents on one page, on a specific number of pages.
..................................................................................................................................................................... 79
4.7.1.4 Add, modify text in Headers, Footers in a worksheet............................................................. 79
4.7.1.5 Insert fields: page numbering information, date, time, file name, worksheet name into
headers....................................................................................................................................................... 80
4.7.2 PREPARATION......................................................................................................................................... 82
4.7.2.1 Understand the importance of checking spreadsheet calculations and text before
distribution.................................................................................................................................................. 82
4.7.2.2 Preview a worksheet. .................................................................................................................. 83
4.7.2.3 Turn on, off display of gridlines, display of row and column headings for printing
purposes..................................................................................................................................................... 83
4.7.2.4 Apply automatic title row(s) printing on every page of a printed worksheet........................ 84
4.7.3 PRINTING ................................................................................................................................................ 84
4.7.3.1 Print a cell range from a worksheet, an entire worksheet, number of copies of a
worksheet, the entire spreadsheet, a selected chart. .......................................................................... 84

FOR USE AT THE LICENSED SITE(S) ONLY

4.1 Using the Application

4.1.1 First Steps with Spreadsheets

What are Workbooks and Worksheets?

• You enter your data into a worksheet. It consists of rows and columns and is
essentially a very large table.

The worksheets in turn are grouped together into workbooks. By default each
workbook in Excel contains 3 worksheets, which are identified by tabs
displayed along the bottom of your screen, which identify the individual
worksheets making up the workbook. By default the first worksheet is called
Sheet1, the next is Sheet2 and so on.

By default each new workbook you open will contain 3 blank worksheets,
although you can increase this number or reduce it down to a workbook,
which only contains one worksheet.

4.1.1.1 Open (and close) a spreadsheet application.

To start Excel using the Windows Start menu

• Click on the Start icon to display the Start menu and then move the mouse
pointer onto All Programs.
• From the sub-menu select Microsoft Excel.

To close Excel
• From the File menu, select Exit
OR press Alt+F4
OR click on the Excel Close icon (top-right of the Excel program window).

4.1.1.2 Open one, several spreadsheets.

FOR USE AT THE LICENSED SITE(S) ONLY

To open an existing workbook

• From the File menu, choose Open
OR click on the Open icon on the Standard toolbar.

• Locate the file which you wish to open and then double click on the file name
to open it. If you need to change to a different folder, then you can use the
Up One Level icon
OR you can click on the down arrow next to the Look in field.

NOTE: By default the My Documents folder is displayed.

To select, and open a continuous block of files

• Click on the Open icon which will display the file Open dialog box. Click on
the first file of the block which you wish to select, and then while depressing
the Shift key, click on the last file of the required block. When you release
the Shift key the entire block will remain selected.

To select, and open, multiple files which are not in a continuous block
• Click on the Open icon which will display the file Open dialog box. Click on
the first file which you wish to select and while keeping the Ctrl key
depressed, click on the other files which you wish to select. When you release
the Ctrl key, the selected files will continue to be highlighted.

FOR USE AT THE LICENSED SITE(S) ONLY

4.1.1.3 Create a new spreadsheet (default template).

To create a new default workbook

• Click on the New icon located within the Standard toolbar
OR press Ctrl+N

FOR USE AT THE LICENSED SITE(S) ONLY

4.1.1.4 Save a spreadsheet to a location on a drive.

To save the workbook

• To save the workbook, click on the Save icon, and you will see the Save As
dialog box.

• In the section of the dialog box called File Name, enter a name for your file.
Then click on the Save button to save the file.

4.1.1.5 Save a spreadsheet under another name.

To save a workbook (using a different name)

• Click on the File drop down menu and then select the Save As command.
The Save As dialog box will be displayed. If necessary select a different
folder in which you may wish to save the file.
• Enter the new file name in the File name text box.
• Click on the Save button.

To save a file to a diskette

• Click on the File drop down menu and select the Save As command. A dialog
box will be displayed similar to that illustrated.

FOR USE AT THE LICENSED SITE(S) ONLY

• Click on the down arrow to the right of the Save in section of the dialog box,
which will display a drop down menu, as illustrated.

• Select the 3 1/2 Floppy (A:) icon.

• Enter a file name and then click on the Save button.

4.1.1.6 Save a spreadsheet in another file type such as: text file, HTML,
template, software specific file extension, version number.

To save a file in a format other than Excel format, such as Lotus 123
• From the File drop down menu, click on the Save As command.
• If necessary, select the folder in which you wish to save the file from the
Look in list box.
• Click on the down arrow to the right of the Save as type: box, and select the
type of file format in which you wish to save the file as, i.e. WKS, Excel 4 etc.

• Enter a file name.

• Click on the Save button to save it in the required format.

To save a file in an earlier Excel format

• From the File drop down menu, click on the Save As command.

FOR USE AT THE LICENSED SITE(S) ONLY

• If necessary, select the folder in which you wish to save the file in from the
Look in list box.
• Click on the down arrow to the right of the Save as type: box, and select the
type of file format you wish to save the file as, such as the example shown
where we have selected the Microsoft Excel 5.0/95 format.

• Enter a file name.

• Click on the Save button to save it in the required format.

To save an Excel file as a text file

• From the File drop down menu, click on the Save As command.
• If necessary, select the folder in which you wish to save the file from the
Look in list box.
• Click on the down arrow to the right of the Save as type: box, and select the
type of text format you wish to save the file as, such as Text (Tab
delimitated)

• If necessary, enter a file name.

• Click on the Save button to save it in the required format.

What are Templates?

• Frequently when working with spreadsheets you want to use the same layout
or design. You can re-create the design every time you want to use it, or you
can create a spreadsheet to use as a pattern. The spreadsheet pattern is
called a template.

Templates can be produced which include the following elements:

- Text and graphics
- Formatting information
- Layouts
- Styles
- Headers and Footers
- Formulas
- Macros

FOR USE AT THE LICENSED SITE(S) ONLY

• Templates are stored with the extension .XLT and when they are accessed to
create a new sheet, a copy of the original is made. The original template is
left untouched ready for further use. A template is produced by creating a
spreadsheet which contains all the elements you want, and then saving it as
an .XLT file.

To save a workbook as a template file

• You may save your workbook as an Excel template, by selecting Template
from the Save as type section of the Save dialog box.

To use a template
• From the File menu, select New to display the New dialog box.
• Select the template you require. Notice that you normally see a number of
tabs on this dialog box, such as General and Spreadsheet Solutions. If
you wish to use the default template, select Workbook from the General
tab.
• Select OK to open a copy of the template, i.e. a Workbook.

To save a file in a format suitable for posting on a Web site

• From the File drop down menu, click on the Save As command.
• Click on the down arrow to the right of the Save as type: box, and select the
type of file format you wish to save the file as, i.e.
Web Page (.htm:*.html)

• Enter a file name.

• Click on the Save button to save it in the required format.

NOTE: Some formatting information which is contained in the original may

be lost in the process!

FOR USE AT THE LICENSED SITE(S) ONLY

4.1.1.7 Switch between worksheets, open spreadsheets.

To switch to a different worksheet within a workbook

• Click on the required worksheet tab, displayed along the bottom of your
screen, as illustrated.

To switch to a different, open workbook (using the Windows Status bar)

• Click on the required workbook icon, displayed within the Windows Status
Bar, which is along the bottom of your screen, as illustrated.

To switch to a different, open workbook (using the Window drop down menu)
• Within Excel, click on the Window drop down menu, and you will see
workbooks listed, as illustrated (in this case Book1 and Book2)

4.1.1.8 Use available Help functions.

What is the Office Assistant?

• By default this friendly little creature will watch what you do and offer tips on
how to work more productively.

Today's Tip
• By default Excel will display a tip of the day each time you start Excel. If you
take the time to read these when they are displayed, then you will soon find
that you are on the way to becoming an Excel expert!

FOR USE AT THE LICENSED SITE(S) ONLY

To display the Assistant

• If the assistant has been hidden you can reactivate it, select Show the
Office Assistant command from the Help menu. This will display a dialog
box allowing you to ask questions.

To hide the Assistant

• Right click on the Office Assistant, and from the pop-up menu displayed,
select Hide.

To use 'what is this' Help within a dialog box

• Within many dialog boxes, you will see a question mark icon in the top-right
of the dialog box. For instance if you click on the Format drop down menu,
and then select the Cells command, it will display the Format Cells dialog
box. If we wanted to know the purpose of the Category options, you would
click on the question mark icon, and then click on the Category area of the
dialog box. A popup box will be displayed, as illustrated, which explains the
function of the item you clicked on.

FOR USE AT THE LICENSED SITE(S) ONLY

4.1.1.9 Close a spreadsheet.

To close a spreadsheet
• From the File menu, select Close.

You will be asked if you wish to save any changes you have made to the file.
Select Yes to save, or No to ignore the changes.

If you are saving a new file, the Save As dialog box will be displayed. In the
File name text box, enter a name and click on the Save button.

FOR USE AT THE LICENSED SITE(S) ONLY

4.1.2 Adjust Settings

4.1.2.1 Use magnification/zoom tool.

To zoom the view

• Use the Zoom icon within the Standard Excel toolbar.

4.1.2.2 Display or hide built-in toolbars.

To display or hide a toolbar

• To display a toolbar, select the Toolbars command from the View menu to
display the Toolbars drop down menu. A list of toolbars is displayed.
• Choose the Toolbar you want to display by clicking on it from the list.

4.1.2.3 Freeze, unfreeze row and/or column titles.

FOR USE AT THE LICENSED SITE(S) ONLY

To freeze panes
• To freeze a horizontal (column) heading, move the mouse pointer to the
location indicated and drag and drop to display one or more column.

• To freeze a vertical (row) heading, move the mouse pointer to the location
indicated and drag and drop to display one or more row.

• From the Window menu, select Freeze Panes.

To unfreeze panes
• From the Window menu, choose Unfreeze Panes.

4.1.2.4 Modify basic options/preferences in the application: user name,

default directory/ folder to open, save spreadsheets.

To modify basic preference options

• Click on the Tools drop down menu and select the Options command, which
will display a dialog box. Click on the General tab.

FOR USE AT THE LICENSED SITE(S) ONLY

To set the user name: Enter your name in the User Name section of the
dialog box.

To set the default directory: Enter the path to the directory which you
wish to set up as the default directory, in the Default file location section of
the dialog box. Once applied this default directory will be the one displayed in
opening and saving dialog boxes within Excel

FOR USE AT THE LICENSED SITE(S) ONLY

4.2 Cells

4.2.1 Insert Data

4.2.1.1 Enter a number, a date, text in a cell.

To enter numbers
• Select the cell in which you want to enter a number and type in the number.
If you want to make the number a negative, type a minus sign in front of it
or enclose it in parentheses (i.e. brackets).
• To indicate decimal places, you type a full stop.
• The numbers will be right aligned by default. If you wish to enter a number
or formula as text, type an apostrophe before it.

To enter dates or times

• Select the cell in which you want to enter the date or time and then type in
the date or time. Separate the date with either hyphens or slashes.
• To enter the current date, press Ctrl+; to enter the current time, press
Ctrl+:

To enter text into a cell

• Simply click on the cell and start typing the text which you wish to appear in
that cell. To move to the next cell use the Tab key. To move down a cell
press the Enter key.

4.2.2 Select Cells

4.2.3.1 Select a cell, range of adjacent cells, range of non-adjacent cells,

entire worksheet.

To select a cell
• Click on the cell you wish to select.

FOR USE AT THE LICENSED SITE(S) ONLY

To select non-adjacent cells

• Click on the first cell you wish to select.
• Depress the Control key.
• Click on the other cells which you wish to select.
• Release the Control key when you have finished.

To select a range of cells by dragging the mouse

• Click on the first cell in the range.
• Hold down the left-hand mouse button and drag over the cells you wish to
include in the selection.

To select a range of adjacent cells (making up a rectangular block)

• Click on the first cell of the rectangular block which you wish to select (i.e.
the top-left hand corner).
• Move down to the cell which marks the bottom-right corner of the rectangular
block.
• Depress the Shift key (and keep it depressed).
• Click once on the last cell of the required block.
• Release the Shift key.

To select an entire worksheet

• Click the Select All icon in the top, left-hand corner of the worksheet where
the row heading and column heading meet, or press Ctrl+A.

To select several worksheets

• Click on the first sheet tab.
• Click on other sheet tabs you wish to select whilst depressing the Ctrl key.

To select all worksheets

• Click on a sheet tab using the right-hand mouse button to display the
shortcut menu. Choose Select All Sheets.

FOR USE AT THE LICENSED SITE(S) ONLY

4.2.2.2 Select a row, range of adjacent rows, range of non-adjacent rows.

To select a row
• Click the row heading number.

To select a range of adjacent rows

• Click the row heading number of the first row which you wish to select.
• Position the mouse pointer at the last row in the range which you wish to
select.
• Depress the Shift key and keep it depressed.
• Click on the last row in the range which you wish to select.
• Release the Shift key.

To select a range of non-adjacent rows

• Click the row heading number of the first row which you wish to select.
• Position the mouse pointer at another row heading of a row which you wish
to select.
• Depress the Ctrl key and keep it depressed.
• Click on further row heading numbers which you wish to select.
• Release the Ctrl key. The selected row(s) will remain selected, as illustrated.

4.2.2.3 Select a column, range of adjacent columns, range of non-

adjacent columns.

FOR USE AT THE LICENSED SITE(S) ONLY

To select a column
• Click on the column-heading letter.

To select a range of adjacent columns

• Click the column heading number of the first column which you wish to
select.
• Position the mouse button at the last column in the range which you wish to
select.
• Depress the Shift key and keep it depressed.
• Click on the last column in the range which you wish to select.
• Release the Shift key.

To select a range of non-adjacent columns

• Click the column heading number of the first column which you wish to
select.
• Position the mouse button at another column heading of a column which you
wish to select.
• Depress the Control (Ctrl) key and keep it depressed.
• Click on further column heading numbers which you wish to select
• Release the Control (Ctrl) key. The selected columns will remain selected, as
illustrated.

4.2.3 Rows and Columns

4.2.3.1 Insert rows, columns in a worksheet.

To insert a row into a worksheet

• Select the row you want to move down when the new row is inserted above
it.
• To select more than one row, drag the mouse pointer across the required row
headings (with the mouse button depressed).
• Right click over the selected row(s) to display a pop-up menu.
• Select Insert. Any existing data will move down to accommodate the new
rows.

FOR USE AT THE LICENSED SITE(S) ONLY

To insert a column into a worksheet

• Select the column you want to move to the right when the new row is
inserted.
• To select more than one column, drag the mouse pointer across the required
column headings (with the mouse button depressed).
• Right click over the selected column(s) to display a pop-up menu.
• Select Insert. Any existing data will move right to accommodate the new
columns.

4.2.3.2 Delete rows and columns in a worksheet

To delete a row or column

• Select the row(s) or column(s) you wish to delete.
• Right click on a selected row or column and choose Delete from the pop-up
menu.

4.2.3.3 Modify column widths and row heights.

To change the width of a column

• Find the right-hand border of the column you wish to change and follow it to
the top of the worksheet into the area of the column heading.
• When the mouse pointer is moved in this area, it changes to a thick
crosshair.
• Click on the right-hand column heading border and drag the mouse to the left
to reduce the column, or to the right to increase the column size.

NOTE: If you enter text which exceeds the column width, it will spill over into
the next column as long as the cell does not contain any data. If it contains
data the entry will be truncated at the edge of the cell. Although the entire
entry does not appear, it will still be intact. If you enter a number which
exceeds the width of a column, ### signs will be displayed in the cell to let
you know that the column is not wide enough.

To set the column width to match the data automatically

• Find the right-hand column border in the column heading area.
• Double click on the border to make the column change to fit the data in it.
The column will be as wide as the largest entry in it.

FOR USE AT THE LICENSED SITE(S) ONLY

To change the width of multiple columns to match the data

• Click on the heading (column letter) of the first column you want to change,
and drag to highlight the other columns.
• Double click on the right-hand border of the column heading of any of the
highlighted columns.
• The column widths will change to match their largest entry.

To set new default column widths

• From the Format menu, choose Column Standard Width to display the
Standard Width dialog box.
• Enter a new width for standard columns and click on OK.

To change the height of a row

• Select the row(s) you wish to change and from the Format menu, select
Row and choose Height from the Format Row menu. The Row Height
dialog box is displayed.
• Enter the value you want (from 0-409) in the Row Height text box. The
value represents the row height in points and click on OK.

To automatically change a row height to match the data

• Select the row(s) you wish to change and from the Format menu, select
Row and choose AutoFit from the Format Row menu.

4.2.4 Edit Data

4.2.4.1 Insert additional cell content, replace existing cell content.

To insert additional cell contents, or to modify existing cell contents

• Click on the cell containing the data which you wish to change. In the
example shown, we have clicked on cell A2 containing the text Accounts for
2002.

FOR USE AT THE LICENSED SITE(S) ONLY

• Let’s say that we wanted to change the data in the selected cell from
Accounts for 2002 to Accounts for 2003 There are two ways of doing
this:

Method One: Click in the editing bar towards the top of your screen, where
you will see the contents of the selected cell displayed. Make your changes.

Method Two: Called 'in place editing'. Double click on the cell containing the
data which you wish to edit, and then edit the data directly within that cell.

To replace existing cell contents

• Click on the cell contents which you wish to replace. Type in the new data
and the data you enter will automatically replace the existing contents.

4.2.4.2 Use the undo, redo command.

To undo a command
• Click the Undo icon on the Standard toolbar

OR select Undo from the Edit menu

OR press Ctrl+Z.

To redo a command
• Click the Redo icon on the Standard toolbar.

4.2.5 Duplicate, Move, Delete

FOR USE AT THE LICENSED SITE(S) ONLY

4.2.5.1 Duplicate the content of a cell, cell range within a worksheet,

between worksheets, between open spreadsheets.

To copy a cell range within a worksheet

• Select the cell (or cell range) which you wish to copy.
• Press Ctrl+C to copy the selected range to the Windows Clipboard.
• Click on the location where you wish to paste the copied data.
• Press Ctrl+V to paste the copied data.

To copy a row or column within a worksheet

• Select the row or column which you wish to copy.
• Press Ctrl+C to copy the selected range to the Windows Clipboard.
• Select the row or column where you wish to paste the copied data.
• Press Ctrl+V to paste the copied data.

To copy a cell range between worksheets

• Select the cell (or cell range) which you wish to copy.
• Press Ctrl+C to copy the selected range to the Windows Clipboard.
• Click on the worksheet tab (at the bottom of your screen), of the worksheet
to which you wish to copy.
• Click on the location where you wish to paste the copied data.
• Press Ctrl+V to paste the copied data.

To copy a row or column between worksheets

• Select the row or column which you wish to copy.
• Press Ctrl+C to copy the selected range to the Windows Clipboard.
• Click on the worksheet tab (at the bottom of your Excel screen), of the
worksheet to which you wish to copy.
• Select the row or column where you wish to paste the copied data.
• Press Ctrl+V to paste the copied data.

To copy a cell range from a worksheet in one workbook, to a worksheet in a

different workbook
• Select the cell (or cell range) which you wish to copy.
• Press Ctrl+C to copy the selected range to the Windows Clipboard.
• Switch to (or open, or create) a second workbook.
• Click on the worksheet tab to select the required worksheet within the second
workbook.
• Click on the location where you wish to paste the copied data.
• Press Ctrl+V to paste the copied data.

FOR USE AT THE LICENSED SITE(S) ONLY

To copy a row or column from a worksheet in one workbook, to a worksheet in

a different workbook
• Select the row or column which you wish to copy.
• Press Ctrl+C to copy the selected range to the Windows Clipboard.
• Switch to (or open, or create) a second workbook.
• Click on the worksheet tab to select the required worksheet within the second
workbook.
• Click on the worksheet tab (at the bottom of your Excel screen), of the
worksheet to which you wish to copy.
• Select the row or column where you wish to paste the copied data.
• Press Ctrl+V to paste the copied data.

4.2.5.2 Use the autofill tool/copy handle tool to copy, increment data
entries.

To use AutoFill
• Enter a starting value for the series which you wish to create.
• Enter the second value in the next cell.
• Move the mouse pointer to the "fill handle" (this is the small black square at
the bottom right of the selected area). When the mouse pointer is over the
fill handle, it will change shape, from a large white cross to a small black
cross.
• Depress the mouse button and drag as far as you wish to extend the range.
• When you release the mouse button the range will have been filled with
incremental values.
• Autofill can be used for number sequencing, days of the week, or months of
the year.

FOR USE AT THE LICENSED SITE(S) ONLY

To see what AutoFill options are available

• Click on the Tools drop down menu and select the Options command. From
the dialog box displayed select the Custom Lists tab. You will see a number
of pre-defined lists displayed here.

NOTE: You could add your own custom lists using this dialog box.

4.2.5.3 Move cell range contents, entire row(s), entire column(s) within a
worksheet, between worksheets, between open spreadsheets.

To move a cell range within a worksheet

• Select the cell (or cell range) which you wish to move.
• Press Ctrl+X to move the selected range to the Windows Clipboard.
• Click on the location where you wish to paste the copied data.
• Press Ctrl+V to paste the copied data.

To move a row or column within a worksheet

• Select the row or column which you wish to move.
• Press Ctrl+X to move the selected range to the Windows Clipboard.
• Select the row or column where you wish to paste the copied data.
• Press Ctrl+V to paste the copied data.

To move a cell range between worksheets

• Select the cell (or cell range) which you wish to move.
• Press Ctrl+X to move the selected range to the Windows Clipboard.
• Click on the worksheet tab (at the bottom of your screen), of the worksheet
where you wish to move.
• Click on the location to which you wish to paste the copied data.
• Press Ctrl+V to paste the copied data.

FOR USE AT THE LICENSED SITE(S) ONLY

To move a row or column between worksheets

• Select the row or column which you wish to move.
• Press Ctrl+X to move the selected range to the Windows Clipboard.
• Click on the worksheet tab (at the bottom of your Excel screen),
of the worksheet to which you wish to move.
• Select the row or column where you wish to paste the copied data.
• Press Ctrl+V to paste the copied data.

To move a cell range from a worksheet in one workbook, to a worksheet in a

different workbook
• Select the cell (or cell range) which you wish to move.
• Press Ctrl+ X to move the selected range to the Windows Clipboard.
• Switch to (or open, or create) a second workbook.
• Click on the worksheet tab to select the required worksheet within the second
workbook.
• Click on the worksheet tab (at the bottom of your screen), of the worksheet
to which you wish to move.
• Click on the location where you wish to paste the copied data.
• Press Ctrl+V to paste the copied data.

To move a row or column from a worksheet in one workbook, to a worksheet in

a different workbook
• Select the row or column which you wish to move.
• Press Ctrl+ X to move the selected range to the Windows Clipboard.
• Switch to (or open, or create) a second workbook.
• Click on the worksheet tab to select the required worksheet within the second
workbook.
• Click on the worksheet tab (at the bottom of your screen), of the worksheet
to which you wish to copy to.
• Select the row or column where you wish to paste the copied data.
• Press Ctrl+V to paste the copied data.

4.2.5.4 Delete cell contents.

To delete the contents of a cell or range

• Select the cell or range which you want to delete.
• Press the Delete key.

NOTE: If you delete values from cells, which are used in formulas, the
formulas will return errors.

FOR USE AT THE LICENSED SITE(S) ONLY

4.2.6 Search and Replace

4.2.6.1 Use the search command for specific content in a worksheet.

To find text in a worksheet

• Place the insertion point where you want to begin the search.
• Select the Find command from the Edit menu, or press Ctrl+F to display the
Find dialog box.
• Type the text you wish to find in the Find what text box.

• Click on the Find Next button to find the next occurrence of the text you are
looking for.

FOR USE AT THE LICENSED SITE(S) ONLY

4.2.6.2 Use the replace command for specific content in a worksheet.

To find and replace text within a worksheet

• Place the insertion point where you want to begin the search.
• Select the Replace command from the Edit menu, or press Ctrl+H to
display the Find and Replace dialog box.
• Type the text you wish to find and replace in the Find what text box.

• Type the replacement text in the Replace with text box. Select from the
following:

Find Next: Finds the next occurrence of the text.

Replace: Replaces this instance of the text.

Replace All: Will replace all occurrences of the text in the Find What
section
with the text in the Replace With section.

• Select Cancel to stop the search or to close the dialog box.

4.2.7 Sort Data

4.2.7.1 Sort a cell range by one criterion in ascending, descending

numeric order, ascending, descending alphabetic order.

To sort a list using the Sort icons

• Within your data, click within the column by which you wish to sort, then click
on either the Sort Ascending or Sort Descending icons.

FOR USE AT THE LICENSED SITE(S) ONLY

4.3 Worksheets

4.3.1 Handling Worksheets

4.3.1.1 Insert a new worksheet.

To insert a worksheet tab

• Right click on the worksheet which you wish to insert a new worksheet in
front of. In this case we have selected sheet two.
• From the popup menu displayed, select Insert, as illustrated.

• You will see a dialog box displayed, click on the OK button.

The effect is illustrated below, where the new sheet four has been inserted
before sheet two.

FOR USE AT THE LICENSED SITE(S) ONLY

4.3.1.2 Rename a worksheet.

To rename a worksheet tab

• Right click on the worksheet tab which you wish to rename. From the popup
menu displayed select the Rename command.

• You can then type over the default worksheet name, which will become
highlighted.

• In this case the worksheet name Dave has been used.

4.3.1.3 Delete a worksheet.

To delete a worksheet (by right-clicking)

• Click on the relevant worksheet tab with the right-hand mouse button.
• Select Delete from the popup menu displayed.

FOR USE AT THE LICENSED SITE(S) ONLY

If the worksheet contains data, a warning dialog box is displayed. Select

Delete to continue.

4.3.1.4 Duplicate a worksheet within a spreadsheet or between open

spreadsheets.

To copy a worksheet within a workbook (the long way)

• Select the worksheet tab of the worksheet which you wish to copy.
• Right click on the worksheet tab, and select the Move or Copy command.

• A dialog box is displayed.

• Select (for example) move to end.

• Click on Create a copy. This will copy, rather than move.

FOR USE AT THE LICENSED SITE(S) ONLY

• Click on the OK button. An example of the effect is illustrated below.

To copy a worksheet within a workbook (the quick way)

• Select the worksheet tab, of the worksheet which you wish to copy.
• Depress the Ctrl key (and keep it depressed).
• Drag the worksheet tab, either left or right to the required position.
• Release the mouse button and then release the Ctrl key.
• A copy of the worksheet tab will be displayed.

To copy a worksheet to another workbook

• Make sure that you have two workbook files open; the first containing a
worksheet, which you wish to copy to the second workbook.
• Within the first workbook, select the worksheet tab, of the worksheet which
you wish to copy.
• Right click on the worksheet tab, and select the Move or Copy command.

• A dialog box is displayed.

• Click on the down arrow to the right of the To book section of the dialog box.
Select the name of the second workbook, (Book2, in the example
illustrated).

FOR USE AT THE LICENSED SITE(S) ONLY

• Click on the down arrow to the right of the Before Sheet section of the
dialog box. Select which worksheet you wish to insert the copy in front of.
Click on Create a copy.
• Click on the OK button. An example of the effect is illustrated below (in this
example we choose to insert before worksheet 1)

4.3.1.5 Move a worksheet within a spreadsheet or between open

spreadsheets.

To move a worksheet within a workbook (the long way)

• Select the worksheet tab, of the worksheet which you wish to move.
• Right click on the worksheet tab, and select the Move or Copy command.

• A dialog box is displayed.

• Use the Before sheet section of the dialog box, to decide where to move the
worksheet to.
• Make sure that the Create a copy is not selected.

FOR USE AT THE LICENSED SITE(S) ONLY

• Click on the OK button. An example of the effect is illustrated below. In the

example shown, Sheet 1 was moved to before Sheet 3.

To move a worksheet within a workbook (the quick way)

• Select the worksheet tab, of the worksheet which you wish to move.
• Drag the worksheet tab either left or right to the required position. As you
can see a small, downwards pointing, arrow indicates where the worksheet
will be moved to, when you release the mouse button.

• Release the mouse button and the worksheet will be moved to the required
location

To move a worksheet to another workbook

• Make sure that you have two workbook files open; the first containing a
worksheet which you wish to move to the second workbook.
• Within the first workbook, select the worksheet tab, of the worksheet which
you wish to move.
• Right click on the worksheet tab, and select the Move or Copy command.

• A dialog box is displayed.

FOR USE AT THE LICENSED SITE(S) ONLY

• Click on the down arrow to the right of the To book section of the dialog box.
Select the name of the second workbook, (Book2, in the example
illustrated).

• Click on the down arrow to the right of the Before Sheet section of the
dialog box. Select which worksheet you wish to insert the copy in front of.

• Make sure that the Create a copy option is not selected.

• Click on the OK button.

FOR USE AT THE LICENSED SITE(S) ONLY

4.4 Formulas and Functions

4.4.1 Arithmetic Formulas

4.4.1.1 Generate formulas using cell references and arithmetic operators

(addition, subtraction, multiplication, division).

To enter formulas into the worksheet cell

• Place the cursor in the cell where the formula will appear.
• Enter an = (equal) sign.
• Enter the expression which will produce the result you want. This can consist
of operands, values, variables, and symbols which represent mathematical
procedures such as A5+E5.

You can use the following symbols: -

• When the formula is complete, press Enter. The result of the formula will be
calculated and displayed in the cell.
• You can display the formula itself in the Formula bar at the top of the screen
by placing the cell pointer on the cell.
• If there is an error in a formula, an error message is displayed which will
begin with a # sign.

NOTE: If you cannot find an error in a function you can use the Paste
Function to debug it. Highlight the problem cell and click on the Paste
Function icon on the formula bar or Standard toolbar.

To enter a cell or range reference by pointing

• Enter the formula up to the point of the cell or range reference, e.g. to enter
the formula =E2+E5, only enter the equal (=) sign.
• Move the cell pointer to the first cell reference using the arrow keys. The
formula will track your progress and enter the current address into the
formula.
• Press Enter to complete the formula when you have reached the cell you
require.

FOR USE AT THE LICENSED SITE(S) ONLY

Operator evaluation order within Excel

• In Microsoft Excel operators are executed in this order:

4.4.2.1 Recognise and understand standard error values associated with

using formulas.

Common formula error messages

• When writing formulas it is easy to make a mistake: listed below are some
common error messages.

The contents of the cell cannot be displayed correctly as the column is too
narrow.

Indicates that a cell reference is invalid. This is often displayed when you
delete cells which are involved in a formula.

Excel does not recognise text contained within a formula.

On-line Help with formula error messages

• You can use the on-line Help to get further information about errors within
formulas and the meaning of the error messages.
• Click on the Microsoft Excel Help icon.

• When the Office Assistant is displayed, enter the phrase:-

correcting errors in formulas

and then click on the Search button.

FOR USE AT THE LICENSED SITE(S) ONLY

• Select "Find and correct errors in formulas".

• You will then see the following displayed.

• From this screen you can get detailed information about each type of error
message.

FOR USE AT THE LICENSED SITE(S) ONLY

• In the example below we clicked on

FOR USE AT THE LICENSED SITE(S) ONLY

4.4.2 Cell Referencing

4.4.2.1 Understand and use relative, mixed, absolute cell referencing in

formulas.

What is relative addressing?

• By default Excel uses relative addressing. This means that when you use a
formula the components in the formula are relative. What does this mean?
Consider the following example:

The VAT (Value Added Tax) rate is contained in cell F1.

In cell B6 is the price of a laser printer

In cell C6 is the formula =B6*F1
In cell D6 is the formula =B6+C6

If we used drag and drop techniques to highlight cells C6 and D6 and extend
the formulas down the page, we might expect this to work OK but it does
not.

• To try this click on cells C6 and while keeping the Control key depressed
click on cell D6. Release the Control key and the two cells will remain
selected.

FOR USE AT THE LICENSED SITE(S) ONLY

• Move the mouse pointer to the fill handle, i.e. the small, square black dot at
the bottom right corner of the selected range.
• Depress the mouse button and drag down for two rows, then release the
mouse button.
• If you look in cells C7 and C8 there is no VAT calculated!

• Clicking on cell C7 gives the clue as to why this did not work. It contains a
formula as follows:
=B7*E2%

I.e. instead of picking up the VAT rate from cell E1, the formula is pointing to
E2 (which is blank).

• This illustrates relative referencing: The referencing is using an X (i.e. right-

left) and Y (i.e. up-down) set of co-ordinates rather than an absolute
addressing system, which would always point to the contents of a particular
cell.

What is absolute addressing?

• Following on from the previous example, where relative references was used,
we can fix the problem by using an absolute address. Remember that we had
a VAT percentage amount in a cell, and when this was referenced in a
relative manor while dragging and dropping formulas, then the formula no
longer worked. Again we will start with the following:

FOR USE AT THE LICENSED SITE(S) ONLY

• The VAT (Value Added Tax) rate is contained in cell F1.

In cell B6 is the price of a laser printer

In cell C6 is the formula =B6*$F$1
In cell D6 is the formula =B6+C6

If we used drag and drop techniques to highlight cells C6 and D6 and extend
the formulas down the page, we might expect this to work OK and this time it
does!

• To try this click on cell C6 and while keeping the Control key depressed click
on cell D6. Release the Control key and the two cells will remain selected.
• Move the mouse pointer to the fill handle, i.e. the small, square black dot at
the bottom right corner of the selected range.
• Depress the mouse button and drag down for two rows, then release the
mouse button.

As you can see to use absolute addressing, you prefix both parts of the cell
address, by a dollar ($) symbol.

NOTE: While entering formula into a worksheet you can use the F4 key to
quickly convert a relative cell reference to absolute, e.g. Select a cell and
type =B4 and press the F4 key, Excel will insert the dollar symbols for you.

4.4.3 Working with Functions

FOR USE AT THE LICENSED SITE(S) ONLY

4.4.3.1 Generate formulas using sum, average, minimum, maximum,

count, functions.

What is a function?
• A function allows you to calculate a result such as summing numbers
together, or finding the average of a range of numbers.

Common functions
• Some commonly used functions include:

AVERAGE: Used to determine the average number of the selected cells.

COLUMNS: Used to return the number of columns within a reference.

COUNT: Used to count how many numbers are in the list of arguments.

MAX: Used to return the maximum number from a list of arguments.

MIN: Used to return the minimum number from a list of arguments.

ROUND: Used to round off numbers to a specified number of decimal points.

SUM: Used to add the contents of selected cells.

Commonly used functions, as displayed when you click on the down arrow
next to the AutoSum icon.

To use the SUM function

• Select the cell you want to contain the sum formula. This is normally just
under a column of numbers, or just to the right of a row of numbers.
• Click the AutoSum icon on the Standard toolbar. Excel will create a sum
formula, using the range it thinks you want to sum.

FOR USE AT THE LICENSED SITE(S) ONLY

• If the range is correct, press Enter. In the example shown, clicking on the
AutoSum icon produced the following =SUM(F3:F6). This means that the
numbers within the cell range, F3:F6 will be summed.

If Excel has not summed the correct range, then select the range you want to
sum and press Enter.

To use the AVERAGE function

• The AVERAGE function will display the average value for a range of numbers.
• Select the cell you want to contain the Average formula. This is normally just
under a column of numbers, or just to the right of a row of numbers.
• Click on the down arrow next to the AutoSum icon and select the Average
function.

• In the example illustrated, the function has automatically selected the range
D7:D10, and will calculate the average value of the grades for English tests.

• Press the Enter key to see the result.

FOR USE AT THE LICENSED SITE(S) ONLY

To use the MAX function

• The MAX function will display the maximum number within a range.
• Select the cell you want to contain the Max formula. This is normally just
under a column of numbers, or just to the right of a row of numbers.
• Click on the down arrow next to the AutoSum icon and select the Max
function.

• In the example illustrated, the function has automatically selected the range
D7:D10, and will calculate the maximum value.

• Press the Enter key and the result is displayed, as illustrated.

FOR USE AT THE LICENSED SITE(S) ONLY

To use the MIN function

• The MIN function will display the minimum number within a range.
• Select the cell you want to contain the Min formula. This is normally just
under a column of numbers, or just to the right of a row of numbers.
• Click on the down arrow next to the AutoSum icon and select the Min
function.

• In the example illustrated, the function has automatically selected the range
D7:D10, and will calculate the minimum value.

• Press the Enter key and the result is displayed, as illustrated.

To use the COUNT function

• The COUNT function will count up the number of cells which contain numbers.
• In the example illustrated, we have an attendance register, where people are
marked as present or absent.

FOR USE AT THE LICENSED SITE(S) ONLY

• To list the number of people present using the Count function , we first need
to click on the cell you want to contain the Count formula, i.e. cell D15.
• Click on the down arrow next to the AutoSum icon and select the Count
function.

• As you will see in this case the function has not selected the range which
includes all the names, but only the two names in the range D13:D14. The
reason for this is the gap in the column of numbers in cell D12.

FOR USE AT THE LICENSED SITE(S) ONLY

• We need to manually select the range D5:D14, as illustrated.

• Press the Enter key and the result is displayed, as illustrated.

NOTE: We can use the same technique to display the number of persons not
present in cell E15.

4.4.3.2 Generate formulas using the logical function if (yielding one of

two specified values)

The IF Function
• Excel has a number of functions which allow us to evaluate values and make
decisions based on the result of the evaluation. The IF( ) Function is one of
these.

FOR USE AT THE LICENSED SITE(S) ONLY

IF( ) Syntax
The format (Syntax) of the IF( ) function is as follows:
IF(Logical_test, Action_if_true, Action_if_false)

Logical_test
The logical_test evaluates an expression to see if it passes the test, i.e. is
TRUE or does not pass the test, i.e. is FALSE

• Action_if_true
Action_if_true can be a value or an operation. Whichever, the result is placed
in the cell which contains the IF( ) Function if the logical_test is true.

Action_if_false
Action_if_false can be a value or an operation. Whichever, the result is placed
in the cell which contains the IF( ) Function if the logical_test is false.

To enter an IF( ) function

• Click on the cell to contain the IF( ) function.
• Click on the down arrow next to the AutoSum icon, and from the menu
displayed select More Functions, as illustrated.

• This will display the Insert Function dialog box.

FOR USE AT THE LICENSED SITE(S) ONLY

NOTE: To display the Insert Function dialog box you could have pressed the
Shift+F3 key combination.

• Select the IF function, and then click on the OK button, which will display the
Functional Arguments dialog box for the IF function.

• Enter the required expression to be evaluated into the logical_test text

area. Press the Tab key.
• Enter the required expression to be evaluated into the value_if_true text
area. Press the Tab key.
• Enter the required expression to be evaluated into the value_if_false text
area and then click OK.

Another example using the IF function

• Look at the example shown below. In order to pass the average student mark
must be over 70%. The average grades are displayed in cell H8:H13

FOR USE AT THE LICENSED SITE(S) ONLY

In cells I8:I13 we need to display the word Pass or Fail, depending on

whether the average is over 70%. We first need to click on cell I8. Then we
need to click on the Insert Function icon. Next select the IF function within
the Insert Function dialog box and click on the OK button.

In the Logical_test section of the dialog box, we enter the logical test, i.e.
H8>70

In the Value_if_true section of the dialog box, we enter the word Pass

In the Value_if_false section of the dialog box, we enter the word Fail

Click on the OK button to continue. Use the normal Excel drag techniques to
extend this function to the cells I9:I13.

The results will be as illustrated.

FOR USE AT THE LICENSED SITE(S) ONLY

4.5 Formatting

4.5.1 Numbers/Dates

To change number formatting

• You can quickly change the formatting of a cell or selected range by using the
following icons on the Formatting toolbar:

Currency
23456 will become £23,456.00 (or your local currency equivalent)

NOTE: In the United States/Canada this icon may contain a $ symbol.

Percent
.25 will become 25%

Comma
12345 will become 12,345.00

Increase Decimal
23,456.00 will become 23,456.000

Decrease Decimal
23,456.00 will become 23,456.0

4.5.1.1 Format cells to display numbers to a specific number of decimal

places, to display numbers with, without commas to indicate thousands.

To establish a fixed number of decimal places for cell formats

• Select the cell, or range, you wish to format with a fixed number of decimal
places.
• To add a decimal point to the selection, click on the Increase Decimal icon
on the Formatting toolbar. You can continue to click to add as many
decimals as required.

FOR USE AT THE LICENSED SITE(S) ONLY

• To remove a decimal point from the selection, click on the Decrease

Decimal icon on the Formatting toolbar. Again, you can continue to click to
remove as many decimals as required.

To apply comma formatting (to indicate thousands)

• Select the cell(s) containing the data which you wish to display with commas
indicating thousands. In the example shown, we have the number 1000000.

• Click on the Comma Style icon

and the display will change as illustrated.

4.5.1.2 Format cells to display a date style.

To format date styles

• Enter a date in a cell.
• Right click to display a pop-up menu, and select Format Cells, to display the
Format Cells dialog box. Select Date from the Category list and use the
Type section of the dialog box to select the required date format.

FOR USE AT THE LICENSED SITE(S) ONLY

4.5.1.3 Format cells to display a currency symbol.

To format cells using currency symbols

• Enter a number in a cell.
• Right click to display a pop-up menu, and select Format Cells, to display the
Format Cells dialog box.
• Select Currency from the Category list and use the Symbol section of the
dialog box to select the required currency format. In the example shown, a
EURO format has been selected.

• Select OK. An example is illustrated below.

4.5.1.4 Format cells to display numbers as percentages.

To format numbers as percentages

• Click on a cell to select it and then click on the Percent Style icon on the
Excel formatting toolbar.
• Enter the percentage value into the cell.

NOTE: Formatting a cell using the percentage style, multiplies the value by
100 and displays the results using a percentage symbol. Thus if you wished
to use a value which would display as 20%, you would enter 0.2 into a cell
formatted this way.

FOR USE AT THE LICENSED SITE(S) ONLY

4.5.2 Contents

4.5.2.1 Change cell content appearance: font sizes, font types.

To change text size

• Select the cell or range of which you wish to change the text size.
• Click on the down arrow to the right of the Font Size icon located on the
Excel formatting toolbar.
• Select the required font size.

To modify the font type used by text

• Select the cell or range to which you wish to apply text formatting.
• Click on the down arrow in the Font section of the Excel formatting toolbar.
Select the required font.

4.5.2.2 Apply formatting to cell contents such as: bold, italic, underline,
double underline.

FOR USE AT THE LICENSED SITE(S) ONLY

To format text as bold

• Select the cell or range to which you wish to apply text formatting.
• Use the Bold icon located on the Excel formatting toolbar.

To format text as italic

• Select the cell or range to which you wish to apply text formatting.
• Use the Italic icon located on the Excel formatting toolbar.

To format text as Underlined

• Select the cell or range to which you wish to apply text formatting.
• Use the Underline icon located on the Excel formatting toolbar.

To format text using double underlining

• Select the cell or range to which you wish to apply double underline
formatting.
• To apply double underlining, then you must access the Font dialog box. To do
this click on the Format drop down menu and then select the Cells
command. This will display the Format Cells dialog box.
• Select the Font tab within the dialog box.
• Click on the down arrow to the right of the underline section of the dialog
box, and then select the required type of underlining, such as Double.

• Click on the OK button to close the dialog box. An example of this effect is
illustrated below.

FOR USE AT THE LICENSED SITE(S) ONLY

4.5.2.3 Apply different colours to cell content, cell background.

To change the colour used by the text

• Select the cell range which contains the contents of which you wish to change
the colour.
• Use the Font Color icon located on the Excel formatting toolbar. Click in the
down arrow to display a range of colour options.

To change the background colour of a cell range

• Select the cell or range to which you wish to apply a different background
colour.
• Right click on the selected range and select Format Cells. This will display
the Format Cell dialog box.
• Select the Patterns tab within the dialog box.

• Select the colour you wish to use for the cell background (be careful that you
select a colour which will allow you to still see the cell contents, for instance,
do not select a dark background, if you are using black as the cell contents
colour!)
• Press the OK button when you have made your selections. An example is
illustrated below.

FOR USE AT THE LICENSED SITE(S) ONLY

4.5.2.4 Copy the formatting from a cell, cell range to another cell, cell
range.

To copy formatting using the Format Painter.

• Select some text which has been previous formatted.
• Click on the Format Painter icon. You will notice that the mouse pointer
shape has changed to the shape of a small painting brush.

• Select the text to which you wish to copy the formatting, and when you
release the mouse button you will see that the formatting applied to the first
block of text has been copied to the newly selected text.

4.4.2.5 Apply text wrapping to contents within a cell.

To wrap text within selected cells

• Select the cell or range to which you wish to apply text wrapping.
• Right click and from the popup displayed select the Format Cells command.
• Click on the Alignment tab within the dialog box.
• Within the Text control part of this dialog box, select Wrap text, as
illustrated.

• Click on the OK button to apply the text wrapping.

A 'before and after' example illustrates the effect.

Before

FOR USE AT THE LICENSED SITE(S) ONLY

After

4.5.3 Alignment Border Effects

4.5.3.1 Align contents in a cell range: left, centre, right; top and, bottom.

To align data within a cell range, to the left, to the right or to centre data
• Select the cell(s) you wish to align.
• Click on the Align Left icon to align data to the left.

• Click on the Align Right icon to align data to the right.

• Click on the Centre icon to centre the data.

To align data between the top and bottom of a cell

• Select the cell(s) you wish to align. From the Format menu, select Cells to
display the Format Cells dialog box.
• To view the Alignment options, click on the Alignment tab at the top of the
dialog box.
• Choose the Top, Centre, or Bottom option in the Vertical area to align the
data in the cell.

FOR USE AT THE LICENSED SITE(S) ONLY

• Click on OK.

4.5.3.2 Centre a title over a cell range.

To merge and centre over a range

• Lets say you had the following data within a worksheet.

• Now let’s say that you wanted the word WEEKDAY, to be centred within the
range C3 to G3.
• Enter the word WEEKDAY in cell C3 and press Return.
• Select the range C3 to G3.
• Click on the Merge and Centre icon, as illustrated.

The result will be as illustrated

FOR USE AT THE LICENSED SITE(S) ONLY

4.5.3.3 Adjust cell content orientation.

To rotate text to any angle

• First select the cell(s) to which you wish to apply the rotation formatting.
• Right click to display the pop-up box, and from the list displayed, select
Format Cells. This will display the Format Cells dialog box. Select the
Alignment tab.
• From the Orientation section either enter the exact amount of rotation
required into the Degrees box, or drag the Text dial to give the desired level
of rotation.
• Select OK.

The effect is illustrated below.

4.5.3.4 Add border effects to a cell, cell range.

To apply a border to a cell range (using the Border icon)

• Select the cell(s) to which you want to add a border.

FOR USE AT THE LICENSED SITE(S) ONLY

• To view border options, click on the down arrow next to the Borders icon on
the Formatting toolbar.

• Select the option you require. Once you have added a border using the
Borders icon, the border you selected will appear on the Borders icon. You
can add the same border simply by clicking on the icon after you have
selected the cell(s) to which you wish to apply the border.

To apply a border to a cell range (using the Format Cells/Border dialog box)
• You could select a cell, or range of cells, and then click on the Format drop
down menu, from which you can select the Cells command. This will display
the Format Cells dialog box.
• Select the Border tab, as illustrated.

• You can use this dialog box to apply borders and also to vary the type of
border applied.
• First choose a preset format to apply a border style.
• Then click on the Border icons within the dialog box.
• Finally use the Style and Color options to customise your borders.
• Click on the OK button to apply the border formatting and close the dialog
box.

FOR USE AT THE LICENSED SITE(S) ONLY

To remove a border from cells or ranges

• Select the cell(s) which contain the border you wish to remove. If you have a
border which appears to be on the left side of a cell, but may actually be on
the right side of the adjacent cell, select both of the cells.
• To reveal the border options, click the arrow next to the Borders icon on the
Formatting toolbar.
• Click on the first border option. This contains no border selection and all
highlighted borders will be removed.

FOR USE AT THE LICENSED SITE(S) ONLY

4.6 Charts / Graphs

4.6.1 Using Charts/Graphs

4.6.1.1 Create different types of charts/graphs from spreadsheet data:

column chart, bar chart, line chart, pie chart.

To use the Chart Wizard to create a chart

• Select the cells you want to include in a chart. If you want to highlight a non-
contiguous range, highlight the first range with the mouse, and hold down
the Ctrl key and click on any other cells.
• On the Standard toolbar, click on the Chart Wizard icon.

• Step 1 of the Chart Wizard dialog box is displayed.

• From within the Chart Type section of the dialog box, select the required
chart type, such as column chart, bar chart, line chart or pie chart. In this
example we have selected the Column.
• Click on the Next button.
• The next page of the Chart Wizard is displayed. You can make changes if
required.

FOR USE AT THE LICENSED SITE(S) ONLY

• Click on the Next button. The next page of the Chart Wizard allows you to
add items such as chart titles, gridlines, etc.

• You can make changes as required, and then click on the Next button.
• The final page of the Chart Wizard is displayed. You would normally click on
the Finish button at this point to insert the chart as an object into your
worksheet.

• The chart is displayed, as illustrated.

FOR USE AT THE LICENSED SITE(S) ONLY

4.6.1.2 Add a title or label to a chart/graph. Remove a title or label from a

chart/graph.

To add a title or label to a chart

• Click on the chart which you have created. You will notice that when the chart
is selected the drop down menus change:

I.e. the Data drop down menu is replaced by a Chart drop down menu.

• Click on the Chart drop down menu, and select the Chart Options
command. Make sure that the Titles tab is selected. Enter or modify a title
as required.

FOR USE AT THE LICENSED SITE(S) ONLY

• In the example shown, we have added a title – Sales Figures

In the example shown, we have added a label for the X axis - Regions
In the example shown, we have added a label for the Y axis - Units Sold

• Click on the OK button when finished.

To remove a title or label from a chart

• Click on a chart containing a title or label which you wish to remove.
• Click on the item, within the chart, which you wish to remove. In the example
shown, we clicked on the title.

• Press the Delete key to remove the title.

We could have used the same method to select and delete a label, for
instance in the example shown, we have selected the Y axis label.

4.6.1.3 Change the background colour in a chart/graph.

To change the background colour of a chart

• Click once on a chart to select it.
• Double click over a portion of the background of which you wish to change
the colour. This will display the Format Chart Area dialog box. If necessary

FOR USE AT THE LICENSED SITE(S) ONLY

select the Patterns tab of this dialog box.

• Select the required background colour, and then click on the OK button.

4.6.1.4 Change the column, bar, line, pie slice colours in a chart/graph.

To change the colour of a column, bar, line or pie slice within a chart
• Click on the chart to select it.
• Click on the chart column, bar, line or pie slice to select it.

• Double click over the selected item.

• From the dialog box displayed, select the Patterns tab, and then select the
required colour.

FOR USE AT THE LICENSED SITE(S) ONLY

• Click on the OK button to apply your changes.

4.6.1.5 Change the chart/graph type.

To use the Chart Type icon

• Click on the chart to select it, and click on the drop down arrow next to the
Chart Type icon on the Chart toolbar.

• Click on one of the chart types which are displayed within the drop down
menu. NOTE: When wishing to convert to a Pie chart you have to use only
one data series.

FOR USE AT THE LICENSED SITE(S) ONLY

An example of the professional looking results which can be achieved is

shown below.

4.6.1.6 Duplicate, move charts/graphs within a worksheet, between open

spreadsheets.

To copy a chart within a worksheet

• Click on the chart which you wish to copy, so that small rectangular black
selection handles are displayed around the border of the chart. This indicates
that the chart is selected.

• Click on the Edit drop down menu and select the Copy command.
• Click elsewhere within the worksheet, click on the Edit drop down menu and
select the Paste command. You may have to move the chart to the required
position.

To copy a chart to a different worksheet within a workbook

• Click on the chart which you wish to copy.
• Click on the Edit drop down menu and select the Copy command.
• Click on the worksheet tab of the worksheet to which you wish to copy the
chart.
• Click within the selected worksheet and then click on the Edit drop down
menu and select the Paste command. You may have to move the chart to
the required position.

FOR USE AT THE LICENSED SITE(S) ONLY

To copy a chart to a worksheet within a different workbook

• Click on the chart which you wish to copy.
• Click on the Edit drop down menu and select the Copy command.
• Switch to, or open a second workbook to which you wish to copy the chart.
• If necessary select the required worksheet within this second workbook.
• Click on the Edit drop down menu and select the Paste command. You may
have to move the chart to the required position.

To move a chart within a worksheet

• Click on the chart which you wish to move.
• Click on the Edit drop down menu and select the Cut command.
• Click elsewhere within the worksheet, click on the Edit drop down menu and
select the Paste command. You may have to move the chart to the required
position.

To move a chart to a different worksheet within a workbook

• Click on the chart which you wish to move.
• Click on the Edit drop down menu and select the Cut command.
• Click on the worksheet tab of the workbook to which you wish to move the
chart.
• Click within the selected worksheet and then click on the Edit drop down
menu and select the Paste command. You may have to move the chart to
the required position.

To move a chart to a worksheet within a different workbook

• Click on the chart which you wish to move.
• Click on the Edit drop down menu and select the Cut command.
• Switch to, or open a second workbook to which you wish to move the chart.
• If necessary select the required worksheet within this second workbook.
• Click on the Edit drop down menu and select the Paste command. You may
have to move the chart to the required position.

4.6.1.7 Resize, delete charts/graphs.

To re-size a chart
• Move the mouse to one of the corner selection handles (the small square
black boxes) and drag and drop. The chart is re-sized in the same way that
any graphic is re-sized within the Microsoft suite of applications.

FOR USE AT THE LICENSED SITE(S) ONLY

To delete a chart
• Click on the chart you wish to delete to select it and press Delete. The chart
will be deleted.

FOR USE AT THE LICENSED SITE(S) ONLY

4.7 Prepare Outputs

4.7.1 Worksheet Setup

4.7.1.1 Change worksheet margins: top, bottom, left, right

To modify margin values

• Click on the File drop down menu and select the Page Setup command. This
will display the Page Setup dialog box.
• Select the Margins tab and modify your margins as required.

4.7.1.2 Change worksheet orientation: portrait, landscape. Change paper

size.

To set orientation and page size

• Click on the File drop down menu and select the Page Setup command. This
will display the Page Setup dialog box.
• Select the Page tab. Select Portrait or Landscape orientation, as well as
the desired paper size.

FOR USE AT THE LICENSED SITE(S) ONLY

4.7.1.3 Adjust page setup to fit worksheet contents on one page, on a

specific number of pages.

To force a worksheet to print on a single page

• Click on the File drop down menu and select the Page Setup command. This
will display the Page Setup dialog box.
• Select the Page tab and modify the Fit to section of the dialog box to print
on a single page.

4.7.1.4 Add, modify text in Headers, Footers in a worksheet.

To use standard headers and footers

• Excel provides standard header and footer options, which can be selected
from the drop down menus in the Page Setup dialog box. From the File
menu, select Page Setup to display the Page Setup dialog box. Make sure
the Header/Footer tab is displayed.

FOR USE AT THE LICENSED SITE(S) ONLY

• Click on the down arrow to the right of the Header list box to reveal a list
of available headers.
• Click on the header required to select it.
• Click on the down arrow on the right of the Footer list box to reveal a list
of available footers.
• Click on the footer required to select it.
• Click on OK to accept the header and footer and close the dialog box.

To create custom headers and footers

• From the File menu select Page Setup to display the Page Setup dialog
box. Make sure the Header/Footer tab is displayed.
• Click on the Custom Header or Custom Footer button to display the
Header (or Footer) dialog box. In the Left section box, enter any data you
want to appear at the left margin of the header or footer. In the Center
section box, enter any data you want to appear at the centre of the header
or footer.
• In the Right section box, enter any data you want to appear at the right
margin of the header or footer. You can also add the date and time to your
header or footer using the Date and Time icons, include file and sheet
names in the header or footer using the File and Sheet name icons, and
determine which pages the header and footer will appear on using the Page
buttons. When you have finished, click on OK to close the dialog box. Your
new header (or footer) will be displayed in the Page Setup dialog box in the
Header or Footer list box. Choose OK to close the Page Setup dialog box.

4.7.1.5 Insert fields: page numbering information, date, time, file name,
worksheet name into headers

FOR USE AT THE LICENSED SITE(S) ONLY

To add page numbering to a worksheet

• Click on the File drop down menu and select the Page Setup command.
• Select the Header/Footer tab within the dialog box.
• Click on either the Custom Header or Custom Footer, as required, and you
will see another dialog box displayed, as illustrated.

• Click within the section of the header or footer where you wish the page
number to be displayed, i.e. left, centre or right.
• Click on the Page Numbering icon.

• Click on the OK button, and then click on the OK button of the Page Setup
dialog box, so that all the dialog boxes are now closed.

TIP: To see your header/footer displayed on screen, click on the Print

preview icon, to view the worksheet as it would print.

To insert fields into a header or footer

FOR USE AT THE LICENSED SITE(S) ONLY

• Click within the section of the header or footer where you wish the field to be
displayed, i.e. left, centre or right.

• Click on the required icon.

Font: Allows you to modify the font type and font attributes.

Page Number: Inserts automatic page numbering

Total Pages: Inserts the total number of pages into the footer/header.
By using this in conjunction with Page Number you can have a header which
would, for instance, display in the format Page 7 of 20.

Date: Inserts the current date.

Time: Inserts the current time.

File Name: Insert the name of the current workbook (i.e. file name).

Sheet Name: Inserts the name of the current worksheet.

• When you have made your selections, click on the OK button, and then click
on the OK button of the Page Setup dialog box, so that all the dialog boxes
are now closed.

4.7.2 Preparation

4.7.2.1 Understand the importance of checking spreadsheet calculations

and text before distribution.

Always check your work prior to sending it to someone else!

• Do not assume that Excel knows what you mean. If you enter the wrong
data, then Excel will use this data and produce incorrect information. You
must ALWAYS check your spelling and do a rough check that the calculations
performed by Excel are as you intended!

FOR USE AT THE LICENSED SITE(S) ONLY

4.7.2.2 Preview a worksheet.

To preview a worksheet
• Click on the Print Preview icon within the Standard Excel toolbar.

You will see a new toolbar displayed. Click on the Close button to return to
the normal Excel view of your data.

4.7.2.3 Turn on, off display of gridlines, display of row and column
headings for printing purposes.

To turn on (or off) the printing of gridlines

• From the File menu, choose Page Setup to display the Page Setup dialog
box.
• Select the Sheet tab.
• To print gridlines make sure that the Gridlines check box (in the Print area
of the dialog box) is ticked. To turn off the printing of gridlines make sure
that this option is not ticked.

• Select OK.

To control the printing of row and column headings

• From the File menu, choose Page Setup to display the Page Setup dialog
box.
• Select the Sheet tab.
• To print row and column headings make sure that the Row and column
headings check box (in the Print area of the dialog box) is ticked. To turn
off the printing of row and column heading make sure that this option is not
ticked.

FOR USE AT THE LICENSED SITE(S) ONLY

• Select OK.

4.7.2.4 Apply automatic title row(s) printing on every page of a printed

worksheet.

To apply automatic title row printing on every page

• From the File menu, choose Page Setup to display the Page Setup dialog
box.
• Select the Sheet tab.
• Click within the Rows to repeat at top box.
• Within your worksheet, click on the row that you wish to apply as a title on
every page. In the example shown, we clicked on row 2.

• Select OK. If you view a multi-page document within the Print Preview view,
you will now see each row title is automatically printed on each page.

4.7.3 Printing

4.7.3.1 Print a cell range from a worksheet, an entire worksheet, number

of copies of a worksheet, the entire spreadsheet, a selected chart.

To print a cell range from a worksheet

• Select the cell range which you want to print.
• Click on the File drop down and select the Print command.
• Within the Print what section of the dialog box, click on Selection.

FOR USE AT THE LICENSED SITE(S) ONLY

• Click on the OK button.

To print the entire active worksheet

• Click on the File drop down and select the Print command.
• Within the Print Range select All, and in the Print What section, click on
Active Sheet(s).

• Click on the OK button.

To print a specified number of copies of a worksheet

• Click on the File drop down and select the Print command.
• Within the Copies section of the dialog box, enter the required number of
copies.

• Click on the OK button.

To print the entire workbook (including all the worksheets within it)
• Click on the File drop down and select the Print command.
• Within the Print what section of the dialog box, select the Entire workbook
option.

• Click on the OK button.

FOR USE AT THE LICENSED SITE(S) ONLY

To print a selected chart

• Click once on a chart to select it.
• Click on the File drop down and select the Print command. You will notice
that within the Print What section of the dialog box, Selected Chart is
active, as illustrated.

• Make any other changes as required from the dialog box, and then click on
the OK button to print the chart.

To print a spreadsheet to a file

• Click on the File drop down menu and select the Print command.
• Within the dialog box displayed, select the Print to file option.

FOR USE AT THE LICENSED SITE(S) ONLY

PL 300T00A ENU Powerpoint 03
No ratings yet
PL 300T00A ENU Powerpoint 03
40 pages
Icdl-Module2 Using The Computer & Managing Files
No ratings yet
Icdl-Module2 Using The Computer & Managing Files
84 pages
Icdl Module 5
No ratings yet
Icdl Module 5
2 pages
ICDL Module 7 PDF
0% (2)
ICDL Module 7 PDF
78 pages
ICDL Management Spreadsheets Syllabus 3.0
No ratings yet
ICDL Management Spreadsheets Syllabus 3.0
6 pages
Questions Modules 1-7
67% (6)
Questions Modules 1-7
46 pages
Tutorial On How To Display Records From Database To Listview in Vb6
No ratings yet
Tutorial On How To Display Records From Database To Listview in Vb6
4 pages
AES Encryption and Decryption in Java - DevGlan
No ratings yet
AES Encryption and Decryption in Java - DevGlan
1 page
Assignment Cover: Muzondo Itai Lionel, P2019517B, Bcom (Hons) Marketing Management 1
No ratings yet
Assignment Cover: Muzondo Itai Lionel, P2019517B, Bcom (Hons) Marketing Management 1
5 pages
Module 1 - Basic Concepts of Information Technology (IT)
100% (13)
Module 1 - Basic Concepts of Information Technology (IT)
74 pages
Module 3 - Word Processing (Word)
100% (2)
Module 3 - Word Processing (Word)
102 pages
Ecdl Module 2
No ratings yet
Ecdl Module 2
105 pages
Module 5 - Database (Access)
No ratings yet
Module 5 - Database (Access)
102 pages
ICDL_Module2
No ratings yet
ICDL_Module2
125 pages
Download full EXCEL VBA Programming By Examples Programming For Complete Beginners Step By Step Illustrated Guide to Mastering Excel VBA Thanh Tran ebook all chapters
100% (4)
Download full EXCEL VBA Programming By Examples Programming For Complete Beginners Step By Step Illustrated Guide to Mastering Excel VBA Thanh Tran ebook all chapters
41 pages
New ICDL Quick Reference
No ratings yet
New ICDL Quick Reference
32 pages
Ms Excel Questions
No ratings yet
Ms Excel Questions
7 pages
Payroll PDF
0% (1)
Payroll PDF
15 pages
Dbcombine1 112
100% (1)
Dbcombine1 112
112 pages
ICDL 2010 Exam Study Guide - Module 3
No ratings yet
ICDL 2010 Exam Study Guide - Module 3
25 pages
ICDL Module 4 PDF
100% (2)
ICDL Module 4 PDF
76 pages
Theory of Machines
No ratings yet
Theory of Machines
180 pages
Step by Step Business Math and Statistics Sneak Preview
No ratings yet
Step by Step Business Math and Statistics Sneak Preview
42 pages
Excel Functions
No ratings yet
Excel Functions
17 pages
ICDL Module 6 PDF
No ratings yet
ICDL Module 6 PDF
82 pages
Chapter 2 - Accounting Equation and Double Entry
No ratings yet
Chapter 2 - Accounting Equation and Double Entry
10 pages
Excel Interview Questions Answers
No ratings yet
Excel Interview Questions Answers
7 pages
(M) BROCHURE - Data Science Learning Path
No ratings yet
(M) BROCHURE - Data Science Learning Path
33 pages
Database Management System Practical
No ratings yet
Database Management System Practical
3 pages
Algorithm and Flowchart
No ratings yet
Algorithm and Flowchart
5 pages
modelling with excel (online)
100% (1)
modelling with excel (online)
159 pages
Microsoft Excel 2007 Tutorial
No ratings yet
Microsoft Excel 2007 Tutorial
51 pages
U2l1 Se
No ratings yet
U2l1 Se
0 pages
Serial Number Microsoft
No ratings yet
Serial Number Microsoft
1 page
Oop in PHP: OOP Object Oriented Programming
100% (1)
Oop in PHP: OOP Object Oriented Programming
52 pages
ICDL Syllabus Version 5.0
No ratings yet
ICDL Syllabus Version 5.0
37 pages
Excel Functions
No ratings yet
Excel Functions
100 pages
XII Mathematics Pre Board-1 Set-A (2022-23) CRPF SCHOOL
No ratings yet
XII Mathematics Pre Board-1 Set-A (2022-23) CRPF SCHOOL
7 pages
International Computer Driving License (Icdl) - Ecollege Course
No ratings yet
International Computer Driving License (Icdl) - Ecollege Course
12 pages
Excel 2016 Charts and Graphs
No ratings yet
Excel 2016 Charts and Graphs
38 pages
Formulas and Functions in Microsoft Excel
No ratings yet
Formulas and Functions in Microsoft Excel
3 pages
Excel Using Macros: LEVEL - Learner
No ratings yet
Excel Using Macros: LEVEL - Learner
31 pages
Vba Syllabus
No ratings yet
Vba Syllabus
2 pages
OSM Calorie Calculator
No ratings yet
OSM Calorie Calculator
8 pages
Formulas in Excel Spreadsheet
100% (1)
Formulas in Excel Spreadsheet
19 pages
Calibre User Manual PDF
No ratings yet
Calibre User Manual PDF
368 pages
Excel Vba Video Tutorial
No ratings yet
Excel Vba Video Tutorial
2 pages
Chapter 1 Arrey and String
No ratings yet
Chapter 1 Arrey and String
49 pages
DAY-3 Excel
No ratings yet
DAY-3 Excel
20 pages
Mulizambia 2 PDF
No ratings yet
Mulizambia 2 PDF
549 pages
TCET FE Maths-2 Resource Book (2020-2021)
No ratings yet
TCET FE Maths-2 Resource Book (2020-2021)
145 pages
Pivot Table Training Manual v0.1 20110202
No ratings yet
Pivot Table Training Manual v0.1 20110202
46 pages
ICDL Module 6 Presentation
No ratings yet
ICDL Module 6 Presentation
40 pages
Excel 2000 Advance Notes
100% (1)
Excel 2000 Advance Notes
72 pages
Module 6 - Presentation PowerPoint
No ratings yet
Module 6 - Presentation PowerPoint
89 pages
ECDL Module 4: Reference Manual
No ratings yet
ECDL Module 4: Reference Manual
85 pages
Ecdl Mod5
No ratings yet
Ecdl Mod5
106 pages
Ecdl Mod3
No ratings yet
Ecdl Mod3
109 pages
icdl-module4 Spreadsheets Excel
No ratings yet
icdl-module4 Spreadsheets Excel
113 pages
Module 2 - Using The Computer and Managing Files
100% (2)
Module 2 - Using The Computer and Managing Files
101 pages