0% found this document useful (0 votes)

821 views

Module 5 - Database (Access)

This document provides information about using Microsoft Access for the ECDL Module 5 Databases syllabus. It explains database concepts such as tables, records, fields and field data types. It also describes how to perform tasks in Access like opening and creating databases, tables, adding and modifying records, and adjusting application settings.

Uploaded by

mizo2089

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

821 views

Module 5 - Database (Access)

Uploaded by

mizo2089

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 102

ECDL Module 5

REFERENCE MANUAL
Databases
Microsoft Access XP Edition for ECDL Syllabus Four
PAGE 2 - ECDL MODULE 5 (USING OFFICE XP) - MANUAL

© 1995-2005 Cheltenham Courseware Ltd.

Crescent House
24 Lansdown Crescent Lane
Cheltenham
Gloucestershire
GL50 2LD, UK
Tel: +44 (0)1242 227200
Fax: +44 (0)1242 253200
Email: info@cheltenhamcourseware.com
Internet: http://www.cheltenhamcourseware.com

All trademarks acknowledged. E&OE.

© Cheltenham Courseware Ltd. 1995-2005 No part of this document may be copied without written permission from
Cheltenham Courseware unless produced under the terms of a courseware site license agreement with Cheltenham
Courseware.

All reasonable precautions have been taken in the preparation of this document, including both technical and non-technical
proofing. Cheltenham Courseware and all staff assume no responsibility for any errors or omissions. No warranties are made,
expressed or implied with regard to these notes. Cheltenham Courseware shall not be responsible for any direct, incidental or
consequential damages arising from the use of any material contained in this document. If you find any errors in these training
modules, please inform Cheltenham Courseware. Whilst every effort is made to eradicate typing or technical mistakes, we
apologise for any errors you may detect. All courses are updated on a regular basis, so your feedback is both valued by us and
will help us to maintain the highest possible standards.

Sample versions of courseware from Cheltenham Courseware

(Normally supplied in Adobe Acrobat format)
If the version of courseware that you are viewing is marked as NOT FOR TRAINING, SAMPLE, or similar, then it cannot be
used as part of a training course, and is made available purely for content and style review. This is to give you the opportunity
to preview our courseware, prior to making a purchasing decision. Sample versions may not be re-sold to a third party.

For current license information

Cheltenham Courseware reserves the right to alter the licensing conditions at any time, without prior notice. No terms or
conditions will affect your rights as defined under UK law. Please see the site license agreement available at:
www.cheltenhamcourseware.com/agreement

PLEASE NOTE: Web sites listed or illustrated within this document are purely for illustrative purposes
and their inclusion does not imply endorsement by the authors or suppliers of this document. No
company or organisation has paid to have their web sites or other information included within this
document.

FOR USE AT THE LICENSED SITE(S) ONLY

ECDL Approved Courseware

IMPORTANT - PLEASE READ
As a condition of providing official approval for this courseware, the ECDL
Foundation demand that the following statement appear within all approved ECDL
courseware, produced by third party courseware providers: -

""European Computer Driving Licence" and ECDL and Stars device are registered trade marks of the European
Computer Driving Licence Foundation Limited in Ireland and other countries. Cheltenham Courseware Ltd is an
independent entity from the European Computer Driving Licence Foundation Limited, and not affiliated with the
European Computer Driving Licence Foundation Limited in any manner. ‘Cheltenham Courseware Ltd ECDL
Courseware’ may be used in assisting students to prepare for the European Computer Driving Licence
Examination. Neither the European Computer Driving Licence Foundation Limited nor Cheltenham Courseware
Ltd warrants that the use of this ‘Cheltenham Courseware Ltd ECDL Courseware’ will ensure passing the
relevant Examination. Use of the ECDL-F approved Courseware Logo on this product signifies that it has been
independently reviewed and approved in complying with the following standards:

Acceptable coverage of all courseware content related to the ECDL Syllabus Version 4.0. This courseware
material has not been reviewed for technical accuracy and does not guarantee that the end user will pass the
associated ECDL Examinations. Any and all assessment tests and/or performance based exercises contained in
this ‘Cheltenham Courseware Ltd ECDL Courseware’ relate solely to this ‘Cheltenham Courseware Ltd ECDL
Courseware’ and do not constitute, or imply, certification by the European Driving Licence Foundation in respect
of any ECDL Examinations. For details on sitting ECDL Examinations in your country please contact the local
ECDL Licensee or visit the European Computer Driving Licence Foundation Limited web site at
http://www.ecdl.com.

“Candidates using this courseware material should have a valid ECDL/ICDL Skills Card/Log book. Without such a
skills card/Log book no ECDL/ICDL tests can be taken, no ECDL/ICDL certificate, nor any other form of
recognition can be given to the candidate. ECDL/ICDL Skills Cards may be obtained from any accredited
ECDL/ICDL Test Centre or from your country's National ECDL/ICDL designated Licensee".

References to the European Computer Driving Licence (ECDL) include the International Computer Driving
Licence (ICDL). ECDL Syllabus Version 4.0 is published as the official syllabus for use within the European
Computer Driving Licence (ECDL) and International Computer Driving Licence (ICDL) certification programme."

IMPORTANT: - Regarding ECDL courseware purchased from Cheltenham Courseware

Ltd. Cheltenham Courseware Ltd accept no liability whatsoever arising from any
changes which you make to this courseware, with, or without, ECDL Foundation
approval.

FOR USE AT THE LICENSED SITE(S) ONLY

5.1 USING THE APPLICATION........................................................................................................................ 6

5.1.1 DATABASE CONCEPTS ............................................................................................................................. 6
5.1.1.1 Understand what a database is. .................................................................................................. 6
5.1.1.2 Understand how a database is organised in terms of tables, records, fields, and with field
data types, field properties......................................................................................................................... 7
5.1.1.3 Understand what a primary key is. .............................................................................................. 8
5.1.1.4 Understand what an index is........................................................................................................ 8
5.1.1.5 Understand the purpose of relating tables in a database. ....................................................... 9
5.1.1.6 Understand the importance of setting rules to ensure relationships between tables are
valid. ............................................................................................................................................................ 10
5.1.2 FIRST STEPS WITH DATABASES ............................................................................................................. 12
5.1.2.1 Open (and close) a database application................................................................................. 12
5.1.2.2 Open or log onto an existing database..................................................................................... 12
5.1.2.3 Create a new database ............................................................................................................... 13
5.1.2.4 Save a database to a location on a drive. ................................................................................ 14
5.1.2.5 Use available Help functions...................................................................................................... 15
5.2.1.5 Close the database...................................................................................................................... 19
5.1.3 ADJUST SETTINGS .................................................................................................................................. 20
5.1.3.1 Change between view modes in a table, form, report............................................................ 20
5.1.3.2 Display or hide built-in toolbars.................................................................................................. 21
5.2 TABLES ....................................................................................................................................................... 23
5.2.1 MAIN OPERATIONS ................................................................................................................................. 23
5.2.1.1 Create and save a table and specify fields with their data types.......................................... 23
5.3.1.3 Add, delete records in a table. ................................................................................................... 26
5.2.1.3 Add a field to an existing table................................................................................................... 27
5.2.1.4 Add, modify data in a record. ..................................................................................................... 29
5.2.1.5 Delete data in a record................................................................................................................ 30
5.2.1.6 Use the undo command.............................................................................................................. 30
5.2.1.7 Navigate within a table to the next record, the previous record, the first record, the last
record, a specific record........................................................................................................................... 30
5.2.1.8 Delete a table. .............................................................................................................................. 32
5.2.1.9 Save and close a table................................................................................................................ 33
5.2.2 DEFINE KEYS .......................................................................................................................................... 34
5.2.2.1 Define a primary key.................................................................................................................... 34
5.2.2.2 Index a field without duplications allowed ................................................................................ 37
5.2.3 TABLE DESIGN/LAYOUT ......................................................................................................................... 37
5.2.3.1 Change field format attributes such as: field size, number format, date format. ................ 37
5.2.3.2 Understand consequences of changing field size attributes in a table ................................ 39
5.2.3.3 Create a simple validation rule for number, text, date/time, currency.................................. 40
5.2.3.4 Change width of columns in a table. ......................................................................................... 46
5.2.3.5 Move a column within a table..................................................................................................... 46
5.2.4 TABLE RELATIONSHIPS .......................................................................................................................... 47
5.2.4.1 Create a one-to-one or one-to-many relationship between tables. ...................................... 47
5.2.4.2 Delete relationships between tables. ........................................................................................ 49
5.2.4.3 Apply rule(s) to relationships such that fields that join tables are not deleted as long as
links to another table exist. ...................................................................................................................... 50
5.3 FORMS ......................................................................................................................................................... 51
5.3.1 WORKING WITH FORMS .......................................................................................................................... 51
5.3.1.1 Open a form.................................................................................................................................. 51
5.3.1.2 Create and save a form. ............................................................................................................. 52
5.3.1.3 Use a form to enter, modify, delete records............................................................................. 57
5.3.1.4 Go to next record, previous record, first record, last record, specific record using form
display......................................................................................................................................................... 59
5.3.1.5 Add, modify text into Headers and Footers in a form. ............................................................ 59
5.3.1.6 Delete a form. ............................................................................................................................... 61
5.3.1.7 Save and close a form. ............................................................................................................... 62

FOR USE AT THE LICENSED SITE(S) ONLY

5.4 RETRIEVE INFORMATION ...................................................................................................................... 63

5.4.1 MAIN OPERATIONS ................................................................................................................................. 63
5.4.1.1 Use the search command for a specific word, number, date in a field. ............................... 63
5.4.1.2 Apply a filter to a table, form. ..................................................................................................... 65
5.4.1.3 Remove a filter from a table, form. ............................................................................................ 67
5.4.2 QUERIES ................................................................................................................................................. 69
5.4 2.1 Create and save a single table query, two-table query using specific search criteria. ...... 69
5.4.2.2 Add criteria to a query using any of the following operators: < (Less than), <= (Less than
or equals), > (Greater than), >= (Greater than or equals), = (Equals), <> (Not equal to), And, Or.
..................................................................................................................................................................... 73
5.4.2.3 Edit a query by adding, removing criteria................................................................................. 77
5.4.2.4 Edit a query: add, remove, move, hide, unhide fields. ........................................................... 78
5.4.2.5 Run a query. ................................................................................................................................. 79
5.4.2.6 Delete a query. ............................................................................................................................. 80
5.4.2.7 Save and close a query. ............................................................................................................. 81
5.4.3 SORT RECORDS ..................................................................................................................................... 81
5.4.3.1 Sort data in a table, form, query, in ascending/descending and numeric/alphabetic order.
..................................................................................................................................................................... 81
5.5 REPORTS .................................................................................................................................................... 83
5.5.1 WORKING WITH REPORTS ...................................................................................................................... 83
5.5.1.1 Create and save a report based on a table, query. ................................................................ 83
5.5.1.2 Change arrangement of data fields and headings within report layout. .............................. 90
5.5.1.3 Group data under a specific heading (field) in a report in ascending, descending order.. 91
5.5.1.4 Present specific fields in a grouped report by sum, minimum, maximum, average, count,
at appropriate break points ...................................................................................................................... 92
5.5.1.5 Add, modify text into Headers, Footers in a report. ................................................................ 95
5.5.1.6 Delete a report.............................................................................................................................. 97
5.7.1.7 Save and close a report. ............................................................................................................. 97
5.6 PREPARE OUTPUTS ................................................................................................................................ 98
5.6.1 PREPARE TO PRINT ................................................................................................................................ 98
5.6.1.1 Preview a table, form, report. ..................................................................................................... 98
5.6.1.2 Change report orientation: portrait, landscape. Change paper size. ................................... 98
5.6.2 PRINT OPTIONS ....................................................................................................................................... 99
5.6.2.1 Print a page, selected record(s), complete table. ................................................................... 99
5.6.2.2 Print all records using form layout, specific pages using form layout. ............................... 100
5.6.2.3 Print result of a query. ............................................................................................................... 101
5.6.2.4 Print specific page(s) of a report, complete report................................................................ 101

FOR USE AT THE LICENSED SITE(S) ONLY

5.1 Using the Application

5.1.1 Database Concepts

5.1.1.1 Understand what a database is.

What is data?
• Data is made up of text, numbers, images and in some cases sounds which
can be processed or stored by a computer. By itself data might not mean
very much. In order to understand it, it needs to be interpreted (or
processed) to become information.

• Information is the meaning given to data by the way in which it is

interpreted.

• To illustrate the difference, Murray, 15000 and 10 mean little as data. But if
we were able to interpret them as the name of a salesman, Murray, his
annual basic salary of $15,000 and his commission rate of 10%, it would
assume more meaning and could be called information. This is not
necessarily the end of the story as this information could be included in
another set of data and used to provide other information. Alternatively, the
same data could be interpreted in another way.

• It is often helpful to think of data as the raw ingredients of a recipe which

when processed and mixed in different amounts by differing techniques
produce different results.

What is a database?
• A simple definition of a database is:
A structured collection of related data about one or more subjects.

In normal daily life we make frequent use of databases, and probably don’t
realise it. Here are a number of simple examples:
- The telephone directory
- Bus or train timetable
- Personal address book
- Filing cabinet

What is a relational database?

• A simple relational database, such as Microsoft Access, is a database which is
based on tables. Each column within a table defines the fields, while each row

FOR USE AT THE LICENSED SITE(S) ONLY

defines the records. Different related data can be held in separate tables. For
instance information about suppliers can be held in one table, while
information about products can be held in a separate table.

5.1.1.2 Understand how a database is organised in terms of tables,

records, fields, and with field data types, field properties.

What is a table?
• A table holds data about a particular item, such as products or suppliers.

What is a record?
• A record is a collection of information which relates to a particular item within
your database table. For instance a record in an address book may consist of
the first and second name of a person, plus their phone number and address
details. Each item within a record is called a field.

What is a field?
• Fields are the individual items which make up a record within your database.
In the example of an address book database, first and second names of your
contacts would both be field names, as would the telephone number.

What is meant by 'Field data types'?

• A field must have a specific data type format. We will see more about this
later, but for now the illustration shows you the data types which are
available within Microsoft Access, including Text, Number, Currency etc.

What is meant by 'Field properties'?

• Each field has a range of field properties associated with it. For instance the
Field Size (set to 50 in the example shown), means that the field will hold a

FOR USE AT THE LICENSED SITE(S) ONLY

maximum of 50 characters.

Other properties include items such as data validation, which means that the
sort of information which is being entered into a field makes sense!

5.1.1.3 Understand what a primary key is.

What is a primary key?

• Primary keys uniquely identify each record in your table and provide the
following advantages:

- An index is automatically created for the primary key.

This speeds up data retrieval and sorting.
Also, the primary key is often used in establishing relationships.
- Records in a form or Datasheet are displayed in primary key order.
- Duplicate records are not allowed. Therefore all records are unique
- A primary key can be made up of one or more fields.

5.1.1.4 Understand what an index is.

What is an index?
• An index allows Microsoft Access to work faster when finding and sorting
records. They work in a similar way to the way you would use an index in a
traditional book, i.e. Access uses the index to find the location of the required
data. Indexes can be created using a single field, or using multiple fields.

FOR USE AT THE LICENSED SITE(S) ONLY

5.1.1.5 Understand the purpose of relating tables in a database.

Why relate tables?

• When using Access you normally set up a number of tables, such as
Customers, Products, Orders, Employees etc. The next stage is to define
relationships between these tables so that the information within each table
can be linked with the information in the other tables. Once these table
relationships are defined we can create queries, forms and reports to display
information which is actually spread across several tables.

FOR USE AT THE LICENSED SITE(S) ONLY

5.1.1.6 Understand the importance of setting rules to ensure

relationships between tables are valid.

Design and document your database!

• It is extremely important to spend time designing your database as time
spent here will often pay dividends later on in the process, as you know
where you are going and what you are trying to do.

How do you know if you’ve got there if you don’t know where you are going?

Questions to ask yourself

• When setting out on the difficult design stage of producing the database
there are a number of questions which you should ask yourself or your user.

What do I want?: You must first establish why you require your database
and what you expect to get from it. It is most important to define your output
needs first.

Mistakes are often made because people try to decide what to put into their
database before they know what they want from it.

What have I got?: Knowing what you want then allows you to look critically
at what data you have and make decisions as to how it should be structured
in terms of fields and tables.

What do I need to do?: This question asks you to look at any manipulation
you need to carry out in order to achieve your information output: searches,
sorts, and calculations.

Define your needs

• In order to clarify your needs it is often useful to draw a simple diagram
and/or write a short narrative. If the database is being designed for others,
show them your sketch/narrative and use it to check your understanding of
their requirements.
•
Example:

C.C.Toys is a retailer of toys for children of all ages. It buys its toys from a
number of suppliers. It employs four staff. The store is laid out according to
themes under a number of categories (e.g. Soft toys, Games Software etc.).
Orders to suppliers can be for either single or multiple products.

The illustration below shows the tables needed for C.C. Toys.

FOR USE AT THE LICENSED SITE(S) ONLY

CA
TE
G
O PRODUCTS
RI
ES

S
ER
LI
PP
ORDERS

SU
C.C.
EMPLOYEES Toys

Basic design rules

• If you stick to a set of rules when designing your database, it will make your
life much easier when using the database!

Make each record unique: Each table should be allocated a primary key. A
primary key is simply a field or a combination of fields which makes a record
unique. Give your table a primary key to ensure you have no duplicate
records. Select the primary key yourself. If you let Access define the primary
key, it will add a counter field at the beginning of each record. The counter
will be incremented on every new record added to the table. Although this
guarantees the uniqueness of the record, it does mean that two records could
contain identical data (apart from the key itself).

Make each field unique: If you have repeated the same kind of information
in a table, you should put it into another table.

Make fields functionally dependent: Each field in the record should relate
to the subject of the record. If it doesn't, it's either redundant or it belongs in
another table!

Ensure each field is independent: You should be able to alter any one
field in a record without affecting any of the others.

Ensure fields don’t contain calculated or derived data: As an example,

you need only hold gross pay and deductions on a person's salary record. Net
pay can be calculated when it is required, when printing the pay slip for
instance.

Ensure data is in its smallest logical parts: It might be useful, for

instance, to keep customers' postcodes separate from the rest of their
addresses so that you can analyze sales based on postal regions.

FOR USE AT THE LICENSED SITE(S) ONLY

5.1.2 First Steps with Databases

5.1.2.1 Open (and close) a database application.

To start Access
• Click on the Windows Start icon.
• Click on All Programs.
• Click on the Microsoft Access icon from within the submenu displayed.

To close Microsoft Access

• Click on the application's Close icon, at the top-right of the application
window.

5.1.2.2 Open or log onto an existing database.

To open a database
• Click on the File drop down menu and select the Open command, the Open
dialog box will be displayed. Select the database you wish to open and then
click on the Open button.

FOR USE AT THE LICENSED SITE(S) ONLY

5.1.2.3 Create a new database

To create a new database

• Click on the File drop down menu & select the New command. This allows
you to open an existing database, or it gives you options for creating a new
database.

• Blank Database: Allows you to create a new, blank database.

New from template: Allows you to create a database using a pre-existing

template, such as a template for creating an Expenses database (as
illustrated).

General Templates: Displays the Templates dialog box allowing to the

select from a wide range of Access templates.

FOR USE AT THE LICENSED SITE(S) ONLY

• Once you have selected the type of database you wish to create the File
New Database dialog box will be displayed.

• Enter a name for your new database into the File name box and click on the
Create button.

5.1.2.4 Save a database to a location on a drive.

To save a database
• Choose Save from the File menu
OR click on the Save icon located on the toolbar.

To save a database file to a diskette

• There is no easy way within the Access application to save a database opened
from the hard disk to a floppy disk. However, you may use the Windows
Explorer to copy a file to your floppy disk.

• Start the Windows Explorer program.

FOR USE AT THE LICENSED SITE(S) ONLY

• Select the database file on your hard disk which you wish to copy to a floppy
disk.
• Right click on the file and select Send To 3 1/2" Floppy command.

5.1.2.5 Use available Help functions.

What is the Microsoft Office Assistant?

• By default this friendly little creature, will watch what you do and offer tips on
how to work more productively. You can ask it questions in plain English!
Occasionally the Office Assistant will display information on the screen. If you
are unsure about how to use this product you should always read the help
offered. You can choose to implement the tip, have it explained, or to ignore
the tip.

To display the Microsoft Office Assistant

• Select the Show the Office Assistant command from the Help drop down
menu.

To hide the Microsoft Office Assistant

• Right click on the Office Assistant and from the menu displayed, click on the
Hide command.

FOR USE AT THE LICENSED SITE(S) ONLY

To disable the Microsoft Office Assistant

• Right click on the Office Assistant and from the menu displayed, click on the
Options command.
• De-select the Use the Office Assistant option.

• Click on the OK button.

To use "What is this" Help

• Within many dialog boxes you will find a question mark symbol in the top-
right corner of the dialog box. For instance click on the Tools drop down
menu, select the Options command and this will display the Options dialog
box with this sort of help enabled. Not all dialog boxes have this feature. To
use "What is this", click on the question mark and then click on the item in
the dialog box which you do not understand.

• In the example shown we have opened the Column Width dialog box and
displayed the "What is this" help for the Standard Width check box.

• You will also find ‘What’s This’ Help under the Help drop down menu, this
works in the same way.

FOR USE AT THE LICENSED SITE(S) ONLY

The Help drop down menu

• Click on the Help drop down menu and select the command which you
require. Remember that if you move the mouse arrow to the down arrow at
the bottom of the menu, the menu will expand to show all available
commands, as illustrated.

Help Menu - Microsoft Access Help command

• Click on Help drop down menu and select the Microsoft Access Help
command. By default this will display the Microsoft Access Help window.

• If the Office Assistant has been enabled selecting the Microsoft Access
Help command will display the Office Assistant.

FOR USE AT THE LICENSED SITE(S) ONLY

Help Menu - Office on the Web

• Clicking on this option under the Help drop down menu will open your web
browser and display the Office Online web site.

• Through this web site you can download additional templates and software
updates for Access and other Office applications.
• Click on the area of the map relating to your location, and follow the on-
screen directions.

Help Menu – Activate Product

• You need to select this option when you first install Access onto a PC. It is a
way of registering the Product with Microsoft and represents Microsoft
attempts to prevent illegal copying of their products. You only need to
activate the product once, and if you try a second time you will see the
following message.

Help Menu - Detect and Repair

• Selecting this option under the Help drop down menu will display the
following dialog box. Click on the Start button and follow through the on-
screen prompts.

FOR USE AT THE LICENSED SITE(S) ONLY

Help Menu - About Microsoft Access

• Clicking on this option under the Help drop down menu will display the
following dialog box. This screen will display the exact release version of the
application. It will also display your Product ID (removed in the illustration for
security reasons).

5.2.1.5 Close the database.

To close a database
• Choose Close from the File menu
OR click on the Close icon in the top right of the Database window.

FOR USE AT THE LICENSED SITE(S) ONLY

5.1.3 Adjust Settings

5.1.3.1 Change between view modes in a table, form, report.

To switch between views when using tables, forms or reports

• There are two views for tables, forms and reports.

• The Design View: This view is used by the person who creates the database
in the first place (as opposed to the end user, who will later enter data into
the database). This view is used, as the name suggests, to design the table,
form or report. An example of a table displayed in Design View is shown
below. As you can see there are all sorts of options which you can set relating
to the fields within the database.

• The Datasheet View: This is used by the person entering data into a
database.

FOR USE AT THE LICENSED SITE(S) ONLY

To switch between Design and Datasheet View

• Click on the View icon on the toolbar.

5.1.3.2 Display or hide built-in toolbars.

To display or hide a toolbar (using the View menu)

• To display a toolbar, select the Toolbars command from the View menu to
display the Toolbars drop down menu. A list of toolbars is displayed which
includes: Standard, Formatting, Borders, Database, and Drawing etc.
• Choose the Toolbar you want to display by clicking on it from the list.

FOR USE AT THE LICENSED SITE(S) ONLY

To display or hide a toolbar by right-clicking

• A quick way of displaying/hiding toolbars is to right click on an existing
toolbar, this will display the Toolbars drop down menu, from which you can
select or deselect toolbars.

FOR USE AT THE LICENSED SITE(S) ONLY

5.2 Tables

5.2.1 Main Operations

5.2.1.1 Create and save a table and specify fields with their data types.

To create a table and specify field data types.

• In the Objects section of the main dialog box, make sure that Tables is
selected.

• Double click on the Create table in Design view option, which will open a
dialog box allowing you to create a table.

• In the Field Name section of the dialog box, enter the name of the first field.
In this example we have entered 'First name'.

FOR USE AT THE LICENSED SITE(S) ONLY

• Press the Tab key (the key with the two opposing, horizontal arrows on it).
This will take you to the next column, called 'Data Type'.

• Notice that the default data type displayed is Text.

• Click on the down arrow which is now displayed within the right side of this
column and a popup menu will be displayed.

• You can use this popup menu to change the data type for that field. As the
field will be the first name of a record, i.e. text, we will keep the default data
type of text.
• Press the Tab key again and this will take you to the Description field. This
optional field allows you to describe the purpose of the field.
• As the field name in this case is self-evident we have no need for this
optional field and can press the Tab key again. This will take you to the next
row down in the 'Field Name' column.
• We can enter another field, such as 'Second name'. Pressing the Tab key
again allows you to set the data type, which again we will keep as text.

• We will now add a field called 'Company Reference Number', which this
time we will set as a number.

FOR USE AT THE LICENSED SITE(S) ONLY

• When we have finished the table will look like this.

• We can now save the table by clicking on the Save icon.

• You will see a dialog box in which you can enter your table name.

• Clicking on the OK button may display a further dialog box.

• Clicking on the Yes button will save and set a primary key.

• Close the table (by clicking on the close icon at the top-right of the table
window).

FOR USE AT THE LICENSED SITE(S) ONLY

You will see the table displayed within the Database dialog box. In the
example shown the table is called 'My table'.

5.3.1.3 Add, delete records in a table.

To add records to a table.

• In the previous section we saw how to create a table.
• Double click on the name of the table which you wish to open. The table will
be displayed, into which you can enter your data.

• We can enter data as illustrated (using the Tab key to jump from field to
field).

• If we try entering letters, rather than numbers into the company reference,
we will see the following message displayed (as we set the data type to
number, not text).

• When we have finished entering our records, we can save and close the
table.

FOR USE AT THE LICENSED SITE(S) ONLY

To delete records within a table

• Select the entire record row as in the example shown.

• Press the Delete key. A warning dialog box will be displayed.

• Click on the Yes button to confirm the record deletion.

5.2.1.3 Add a field to an existing table.

To add a field to an existing table.

• In the previous sections we saw how to create a table and then how to add
records to the table. Let’s say that after using the table for a while, we have
decided that there should have been one or more extra fields within the
table. First we need to open the table, which we can do by double clicking on
the table name, displayed within the Database window.
• Click on the View icon (top-left within the Access window).

This will change the view to the design view, allowing you to modify the
structure of the table. The screen will resemble that illustrated.

FOR USE AT THE LICENSED SITE(S) ONLY

• Within the Field Name column, click in the cell under the 'Company
Reference Number'.
• We will enter a field relating to whether the person is in the company
retirement scheme or not. We will call the field 'In company pension?'.

• In the Data Type section we will set the option to Yes/No.

• The finished table will look like this.

• If we click on the View icon (top-left within the Access window) we can see
the new field displayed

as illustrated.

• We can either click or not click these company pension check boxes, as
illustrated.

FOR USE AT THE LICENSED SITE(S) ONLY

5.2.1.4 Add, modify data in a record.

To add data to a record

• Open the table containing the record which you wish to add data to.
• Click within the field you wish to enter your data into.
• Enter your data.

To modify data within a record

• Open the table containing the record which you wish to modify.
• Edit the data within the record which you wish to modify (using the same
techniques as you when using a word-processor).

FOR USE AT THE LICENSED SITE(S) ONLY

5.2.1.5 Delete data in a record.

To delete data within a record

• Open the table containing the records which you wish to modify.
• Delete the data within the record which you wish to remove (using the same
techniques as you would when using a word-processor, i.e. select and then
press the Delete key).

5.2.1.6 Use the undo command.

To use the Undo command

• Click on the Undo icon in the toolbar.

5.2.1.7 Navigate within a table to the next record, the previous record,
the first record, the last record, a specific record.

To navigate through a table to edit records

• Whether you edit your records through a Datasheet or a form, there is, as
usual, a variety of ways to do it. As far as your user is concerned, you should
make it as straightforward and uncomplicated as possible: for the user, there
should only be one right way.

Many editing operations first involve selection. To replace a field, you first
select it and then type in the new value.

• The grey area to the left of each record in the Datasheet is called the record
selector. The following symbols indicate the status of the record:

Current record.

Record is selected.

FOR USE AT THE LICENSED SITE(S) ONLY

Record is being edited.

Last (empty) record.

To move to a field using the mouse

• Move the mouse pointer over the required field and click.

Note: If you click in the leftmost position in the field, the whole field is
selected.

To move through the table using the keyboard

• To move from field to field and record to record, use one of the following
methods:

Tab: to the next field.

Shift+Tab: to the previous field.

Home: to the first field of the current record.

End: to the last field of the current record.

(Down arrow key): to the next record.

(Up arrow key): to the previous record.

Ctrl+Home: to the first field of the first record.

Ctrl+End: to the last field of the last record.

Page Up: scroll up one page.

Page Down: scroll down one page.

To move from record to record using the scroll bar and mouse
• To move from record to record:

to the next record

to the previous record

FOR USE AT THE LICENSED SITE(S) ONLY

to the last record

to the first record

To move to a specific record using the Edit menu

• Choose Go To from the Edit menu and select First, Last, Next, Previous or
New Record.

To move to a specific record using the keyboard

• Press F5 to highlight the record number on the scroll bar.
• Type the number of the record you want.

• Press Enter.

5.2.1.8 Delete a table.

To delete a table
• Select the table which you wish to delete, such as a table in the example
below.

FOR USE AT THE LICENSED SITE(S) ONLY

• Press the Delete key and you will see a warning dialog box.

• Clicking on the Yes button will delete the selected table.

5.2.1.9 Save and close a table.

To save a table
• To save a table, click on the File drop down menu and select the Save
command.

FOR USE AT THE LICENSED SITE(S) ONLY

To close a table
• To close a table, click on the Close icon at the top-right of the table window.

5.2.2 Define Keys

5.2.2.1 Define a primary key

To define a primary key (automatically when creating a table)

• When you create a new table part of the process will automatically assign a
primary key to the table, as in the following example where we used the
Create Table in Design View option. We created the following fields.

• We then save the table, as illustrated.

A dialog box is then displayed, offering to create a primary index.

• Clicking on the Yes button will create a primary index as illustrated (using an
AutoNumber Data Type).

FOR USE AT THE LICENSED SITE(S) ONLY

To define a primary key (manually after a table has been created)

• You can add a primary key to a table which does not already have a primary
key set. In the following example we have a table with no primary key.

• Click on the View icon which will display the table in design view.

You will notice that the Primary Key icon is visible within the Design View
toolbar.

• In this case, select the Company ID field and then click on the Primary Key
icon.

If you look at the information displayed towards the bottom of your screen,
you will see that by default No duplicates will be allowed.

FOR USE AT THE LICENSED SITE(S) ONLY

• Save the table. If in this example we were to switch back to the Datasheet
View and try to enter a record containing a Company ID field number which
had already been used, as below:

You would see the following error message.

FOR USE AT THE LICENSED SITE(S) ONLY

5.2.2.2 Index a field without duplications allowed

Modifying the way a field is indexed

• Your primary key field will automatically be indexed so that duplicated entries
are not allowed. Thus in the previous example, we created a primary key
based on the Company ID Number. This Company ID Number was
automatically indexed, so that no two people could have the same Company
ID Number. If you wish to change this indexing, you need to display the table
in Design View and then select the field to which a primary key has been
applied. The field properties will be displayed towards the bottom of your
screen. If you click on the down arrow to the right of the Indexed property,
you will see the various options listed from which you can select.

5.2.3 Table Design/Layout

5.2.3.1 Change field format attributes such as: field size, number format,
date format.

To change field format attributes.

• Open the table which you wish to modify.
• If necessary, click on the View icon (top-left within the Access window) so
that we can see the table displayed in design view.

The screen should resemble that illustrated.

FOR USE AT THE LICENSED SITE(S) ONLY

• Click on the field which you wish to modify the attributes of. In this example
if we click in the Data Type cell for the First name field, we will see the
following information displayed.

Towards the bottom of the screen you can see information displayed relating
to field attributes.

• To modify Field Size: Click within the Field Size section of the dialog box.
As you can see a description of the attributes function is displayed to the
right (in blue).

Enter the maximum size that you wish to set for this field. The size being the
maximum number of characters which can be entered into this field.

• To modify Number Format: Within a table (in design view), click on a field
which has a Number Data Type.

Click within the Format section of the dialog box, a description of the
attributes function is displayed to the right (in blue). When you click on the
down arrow to the right of the Format section you will see the different
number formatting options displayed. Click on the required format.

FOR USE AT THE LICENSED SITE(S) ONLY

• To modify Date Format: Within a table (in design view), click on a field
which has a Date/Time Data Type. Click within the Format section of the
dialog box (towards the bottom of your screen). When you click on the down
arrow to the right of the Format section you will see the different options
displayed, click on the required date or time format.

5.2.3.2 Understand consequences of changing field size attributes in a

table

Make sure that your field size attributes are long enough!
• If you make a field attribute too small you will not be able to enter all your
data (when entering data in Datasheet view). In the following example the
Company Name field is set to a maximum of 20 characters, which is too short
for some company names.

FOR USE AT THE LICENSED SITE(S) ONLY

If we wished to enter information for a company called Cheltenham Office

Supplies it would not fit into the available field space.

5.2.3.3 Create a simple validation rule for number, text, date/time,

currency.

To create a validation rule for a number

• In table design view, select a field which has a Number Data Type.
• In the Field Properties section of the dialog box (towards the bottom of the
screen), click on the Validation Rule section. The screen will resemble that
illustrated.

• Click on the small icon with the 3 dots to the right of the Validation Rule
section.

FOR USE AT THE LICENSED SITE(S) ONLY

This will display the Expression Builder, as illustrated.

Let’s say we want to limit numbers to between 1 and 10,000. We can use the
Expression Builder to achieve this.
• Within the left section of the dialog box, click on Operators. The dialog box
will display a range of operators, as illustrated.

• In this case we wish to limit valid entries to between 1-10,000, so we double

click on the
operator. The screen will be as illustrated.

FOR USE AT THE LICENSED SITE(S) ONLY

• We can then type in the value 10000. The screen will be as illustrated.

• Click on the OK button and the Field Properties section of the dialog box will
be as illustrated.

• If we were to switch to Datasheet View and enter a number into the validated
field which was over 10,000, we would see a rather confusing message such
as the one below.

FOR USE AT THE LICENSED SITE(S) ONLY

We can make this message clearer by creating a custom message. To do this

we would click within the Validation Text area of the dialog box and enter
our message, such as Please re-enter a number between 1 and 10,000.

• If we were to switch to Datasheet View and enter a number which is between

1 and 10,000, it would be accepted. If however the number was over 10,000,
we would see the following error message.

To create a validation rule for text

• In table design view, select a field which has a Text Data Type.
• In the Field Properties section of the dialog box (towards the bottom of the
screen), click on the Validation Rule section.
• Click on the small icon with the 3 dots to the right of the Validation Rule
section.

FOR USE AT THE LICENSED SITE(S) ONLY

• Double clicking on the + to the left of Functions will display the following:

• Clicking on the Built-In Functions icon will display the following:

• In the central column, click on Text to display text validation functions.

FOR USE AT THE LICENSED SITE(S) ONLY

You can pick the text validation function that you require.

• You can use the ‘What is this’ help icon to get more information about these
functions. A sample help screen is illustrated. Get into the habit of using the
help which is available!

To create a validation rule for a date or time

• In table design view, select a field which has a Date/Time Data Type.
• In the Field Properties section of the dialog box (towards the bottom of the
screen), click on the Validation Rule section. You can enter an expression
such as the following, which would only allow a date to be entered using the
year 2002.

>=#1/1/02# And < # 1/1/03#

To create a validation rule for currency

• In table design view, select a field which has a Currency Data Type.

FOR USE AT THE LICENSED SITE(S) ONLY

• In the Field Properties section of the dialog box (towards the bottom of the
screen), click on the Validation Rule section. You can enter an expression
such as the following, which would only allow an amount to be entered in the
range of 1 to 10000.

>0 And <=10000

5.2.3.4 Change width of columns in a table.

To change the width of a column

• Move the mouse pointer to the line at the right of the field (column heading).
It will change to resemble a solid vertical bar intersected by a double-headed
arrow.

• Drag the column border to the size you want.

5.2.3.5 Move a column within a table

To move a column(s)
• Select the column(s) and release the mouse button.
• Click on the field selector and drag the column(s) to the new location. As you
drag the columns a solid bar between columns indicates the current position
of the columns being moved.

FOR USE AT THE LICENSED SITE(S) ONLY

5.2.4 Table Relationships

5.2.4.1 Create a one-to-one or one-to-many relationship between tables.

To create a one-to-one relationship between tables

• Click on the Tools drop down menu and select Relationships.
• If the Show Table dialog box is not already displayed click on the Show
Table icon on the Relationships toolbar.
• Select the table you want to add from the Table list. Use the Ctrl key to add
more than one table or the Shift key to add a block.
• Click the Add button.
• Select a second table from the Show Table dialog box.
• Click the Add button.
• Click the Close button. The Relationships window should now resemble the
illustration below.

• To create a relationship link from a field in one table to a field in another

table, simply drag the field from the first table and drop it on top of the field
in the second table.

• The Edit Relationships dialog box will be displayed. In the example shown
we dragged the OrganizationName field from the Mailing List table to the
Company Name field in the Accounts table.

FOR USE AT THE LICENSED SITE(S) ONLY

• Click on the Create button to create the relationship. A line will appear in the
Relationships window to represent the link.

To create a one-to-many relationship between tables

• Click on the Tools drop down menu and select Relationships.
• If the Show Table dialog box is not already displayed click on the Show
Table icon on the Relationships toolbar.
• Select the table you want to add from the Table list. Use the Ctrl key to add
more than one table or the Shift key to add a block.
• Click the Add button.
• Select a second table from the Show Table dialog box.
• Click the Add button.
• Click the Close button.
• The Relationships window should now resemble the illustration shown.

• In the example above we have 2 tables, Customers and Orders. A customer

may have placed many orders; therefore the relationship between the tables
is one-to-many. The field used to associate an order with a customer is the
CustomerID field.

• Drag and drop the CustomerID field from the Customers table to the
CustomerID field in the Orders table.
• The Edit Relationships dialog box will be displayed.

FOR USE AT THE LICENSED SITE(S) ONLY

• Notice that the Relationship Type area at the bottom of the dialog box
states One-To-Many.
• We need to ensure that any changes to the CustomerID in the Customers
table are replicated in the CustomerID field of the Orders table. To do this
enable the Enforce Referential Integrity option and then enable Cascade
Update Related Fields.

• Click on the Create button. The relationship link will be shown as below:

• The infinity symbol at the Orders end of the link means that there may be
more than one order from a particular customer in the Orders table.

5.2.4.2 Delete relationships between tables.

To delete a relationship between tables

• Click on the Tools drop down menu and select Relationships.
• Click on the relationship line which you wish to delete.
• Press the Delete key, and you will see a warning dialog box, asking if you
wish to permanently delete the relationship. Click on the Yes button to
confirm the deletion.

FOR USE AT THE LICENSED SITE(S) ONLY

5.2.4.3 Apply rule(s) to relationships such that fields that join tables are
not deleted as long as links to another table exist.

To enforce referential integrity

• When you create a relationship, or when you double click on an existing
relationship line (within the Relationships window), you will see the Edit
Relationships dialog box. You can apply relationship rules, by clicking on
the Enforce Referential Integrity check box. This ensures that
relationships between records in related tables are valid. It means that you
will not be able to accidentally modify related data.

Selecting Cascade Update Related Fields means that if you change the
primary key in the record of a table, Access updates the corresponding fields
in related records with the new value. Example: If you change the number of
an order, i.e. the primary key of the Orders record, Access will update the
order number field on all of the associated Order Details records.

Selecting Cascade Delete Related Records means that if you delete a

primary record, the corresponding records in related tables will be deleted.
Example: If you delete an Order record, all of the Order Detail records
relating to that order will be deleted.

FOR USE AT THE LICENSED SITE(S) ONLY

5.3 Forms

5.3.1 Working with Forms

5.3.1.1 Open a form

To open a form
• Within the main Database window, select Forms from the Objects list and
then select the form you wish to open, such as Categories (within the
Northwind database) in the example shown.

• Double click on the selected form to open, as illustrated.

FOR USE AT THE LICENSED SITE(S) ONLY

5.3.1.2 Create and save a form.

To create a form using the AutoForm Wizard

• In the Database window select either Table or Query from the Objects list.
• Click on a Table or Query name to select it.
• Click the New Object icon (within the Standard toolbar) and from the drop
down menu displayed, select the AutoForm command.

• This will display a form which you can use to enter the information into the
table or query.

FOR USE AT THE LICENSED SITE(S) ONLY

The Form Wizard

• If possible, use the Form Wizard to create your forms. It is easy to use and
effective. You can modify the design later if you wish.

To create a form using Form Wizard

• In the Database window select Forms from the Objects list.

FOR USE AT THE LICENSED SITE(S) ONLY

• Choose the New button, which will display the New Form dialog box.

• Select the Form Wizard.

• Choose the table or query where the objects data will come from.

FOR USE AT THE LICENSED SITE(S) ONLY

• Click on the OK button to display the next page of the Form Wizard.

• Click on the field which you wish to add to the form, click on the right printing
arrow button to add it to the Selected Fields section of the dialog box.
• Repeat this procedure so that all the required fields are added.

Remember that you can use the down arrow in the Tables/Queries section
of the dialog box to select a different data source which will contain other
fields.

• When you have added the required fields click on the Next button.

FOR USE AT THE LICENSED SITE(S) ONLY

• The next page of the dialog allows you to define the layout of the form.

• Choose the desired option and then click on the Next button.
• The next page of the Form Wizard allows you to choose a pre-defined style.

• Select the required option and click on the Next button to continue.

• This next page of the Form Wizard allows you to name the form and set
final options for using the form.

FOR USE AT THE LICENSED SITE(S) ONLY

• Click on the Finish button to create the form.

• If you chose to "Open the form to view or enter information", then the
form will be displayed as illustrated.

5.3.1.3 Use a form to enter, modify, delete records.

To enter data into a form

• Open the form you wish to use by selecting Forms from the Objects list in
the Database window and double clicking on the name of the form. The
Form Window will be displayed.
• Entering data into a form is much like entering data into a table. Type your
data into the form field, once finished press the Tab key to move to the next
field. Pressing Tab in the last field will take you to the next record.
• To create a new record, click on the New (Blank) record icon at the bottom
of the Form Window.

FOR USE AT THE LICENSED SITE(S) ONLY

To modify data using a form

• Use the record control arrows to display a record which you wish to alter and
modify the data as required.

To delete records using a form

• Display the form for the record which you wish to delete. For example, if we
used the Northwind database and displayed the Employee records we could
select the record for Margaret Peacock.

To try and delete this record click on the Delete Record icon on the toolbar.

In some cases you may not be able to delete records; in this case you will
see the following dialog box.

FOR USE AT THE LICENSED SITE(S) ONLY

5.3.1.4 Go to next record, previous record, first record, last record,

specific record using form display.

To navigate through a form

• At the bottom left of the record screen you will see the standard form
navigation icons.

To go to the next record: Click on the Next icon.

To go to the previous record: Click on the Previous icon.

To go to the first record: Click on the First Record icon.

To go to the last record: Click on the Last Record icon.

To go to a specific record. Click within the record number section and

enter the required record number, then press the Enter key.

5.3.1.5 Add, modify text into Headers and Footers in a form.

To add text into headers or footers within a form

• Open the form you wish to edit and switch to Design View. The Form window
should now resemble the illustration below:

FOR USE AT THE LICENSED SITE(S) ONLY

• Text must be added beneath either the Form Header or Form Footer bars.
If the Form Header or Form Footer bars are not visible, select the Form
Header/Footer command from the View drop down menu.
• Move the mouse to the bottom edge of either the Form Header or Form
Footer bar at the top or bottom of the Form window, your mouse pointer will
change into a double-headed arrow.
• Click and drag the mouse downward to expand the header or footer section.
• You should now have space into which you can enter your text.

• Select the Label tool from the Toolbox. If the Toolbox is not displayed,
select Toolbox from the View drop down menu.

FOR USE AT THE LICENSED SITE(S) ONLY

• Click within the form header or footer section at the location you want to
insert your text.
• Enter your text.
• Switch back to Form View to see the results of your changes.

To modify the header or footer text within a form

• Open the form you wish to edit and switch to Design View.
• Click on the text in the header or footer which you wish to edit.
• Use standard editing techniques to modify the text.
• Switch back to Form View to see the results of your changes.

5.3.1.6 Delete a form.

To delete a form
• Select the form in the Database window, as in the example below where we
have selected Suppliers from of the Northwind database.

FOR USE AT THE LICENSED SITE(S) ONLY

• Press the Delete key. You will see a warning dialog box. Click on the Yes
button to confirm the deletion. NOTE: YOU CANNOT UNDO THIS
DELETION!

5.3.1.7 Save and close a form.

To save a form
• Click on the File drop down menu and select the Save command.

To close a form
• Click on the form window Close icon (top-right).

FOR USE AT THE LICENSED SITE(S) ONLY

5.4 Retrieve Information

5.4.1 Main Operations

5.4.1.1 Use the search command for a specific word, number, date in a
field.

To begin a search
• Click in the field on which you want to search.
• Choose Find from the Edit menu
OR click on the Find icon on the standard toolbar
OR press CTRL+F.

This brings up a dialog box headed Find and Replace.

• Enter the value you want to find in the box marked Find What:. There are a
number of options you can use to refine your search as follows.

Look In
Allows you to specify whether the whole table or an individual field should be
searched.

Match
The default is Match Whole Field. The other options are to match Any Part
of Field and the Start of Field.

Search
You can select the direction of the search from Up, Down or All. The default
is All.

Match Case
If this box is checked, Access will only find instances of the value where the
case matches.

Search Fields As Formatted

FOR USE AT THE LICENSED SITE(S) ONLY

You can select this option if you want to search the data as it is formatted
rather than how it is held in the table.

To search using wildcard characters

• If you are not sure of all of the characters in your search string (i.e. the value
you enter in the Find What box) you can use wildcard characters as a
substitute. They are as follows:

Question mark ?
Any single character in the same position as the question mark.
Example: J?ne finds June and Jane.

Asterisk *
Any group of characters in the same position as the asterisk.
Example: B*ge finds Baggage, Barge and Brokerage etc.

Hash sign #
Use this for a single digit in the same position as the hash sign.
Example: 199# will find all years between 1990 and 2000.

Square brackets [ ]
Use these around two or more characters when you want your search field to
include any of them.

Example: Jo[ha]n finds John and Joan.

Include an exclamation mark ! after the first square bracket to exclude the
characters following it.

Example: Min[!t] finds Mine and Mind but excludes Mint.

To find a specific value

• Type the value you want to find into the Find What box.

Note: If when adding a record to a table you do not enter anything in a field,
Access stores a null value in the field. If, on the other hand, you type a space
or “”, Access counts this as a zero length string.

If you want to find a null value, type in the text Is Null. If you want to find a
zero length string, type “”.

• Click on the Find Next button or press Enter.

Access moves to the first record in which the value exists and highlights the
field.

• Click on Find Next to find another occurrence of the same value

OR click on Close to complete the operation.

FOR USE AT THE LICENSED SITE(S) ONLY

To find another occurrence of the same value after you have closed the dialog
box
• Press SHIFT+F4
OR click on the Find Next icon (if it is available) on the standard toolbar.

5.4.1.2 Apply a filter to a table, form.

What is a filter?
• Filters are basically simple queries but they only apply to open tables or
forms.
Filters are best used for temporarily altering the view of the data in a table:

• For filtering out records which you don’t want.

• For narrowing the focus of your view (one year out of many).
• For viewing records which meet complex criteria.
• For sorting records on the content of several fields.
• For sorting fields in differing directions (one ascending another descending).

To filter records in a table datasheet by selection

• Display a database table.
• Click in a cell containing the item which you wish to filter on.

In the example shown we have clicked on a cell containing the word "Car".

• Click on the Filter by Selection icon in the toolbar. In this example, only
fields containing the word "Car" will be displayed, as illustrated.

FOR USE AT THE LICENSED SITE(S) ONLY

To filter records in a table datasheet by form

• Open a database table. The example shown lists products offered by a toy
store.

• Click on the Filter by Form icon and the table will change, as illustrated.

• Click on the Category ID column header, and you will see a drop down
menu.
• Click on the drop down arrow and you may select one of the items displayed
to filter this field on.

• In the example shown we have chosen 2.

FOR USE AT THE LICENSED SITE(S) ONLY

• You can make additional selections for the other fields in the table. In this
example we have also selected 10 from the On Order field.

• We now need to apply the filter.

To apply the filter

• Click on the Apply Filter icon, only records matching the filter criteria will be
displayed. In this case all products with a Category ID of 2 and an On Order
quantity of 10.

5.4.1.3 Remove a filter from a table, form.

To remove the filter

• Click on the Remove Filter icon.

FOR USE AT THE LICENSED SITE(S) ONLY

5.4.2 Queries

5.4 2.1 Create and save a single table query, two-table query using
specific search criteria.

What are queries?

• A Database Management System is used mainly for storing and retrieving
information. For convenience, efficiency, and to avoid duplication of data, it is
stored not in one large table but in separate, smaller tables which can be
related. We often need to retrieve information, not as one table of complete
records, but as a subset of one or more tables.

• Suppose you wanted to know how your sales staff had been performing
during a particular period. You would probably need to extract information
from three tables: Employees, Orders and Order Details. You would need the
Employee table for the salesperson's name; the Order table for the dates of
the orders; and the Order Details table for the amounts sold. Employee and
Order records would be linked by employee number; Order and Order Detail
records would be linked by order number. You would want to limit your
results to Order and Order Detail records which fell in the specified period.
Also, you would only be interested in people employed during that period as
sales staff. Ideally you would want to present the information in a report, but
first you would need to retrieve it with a query.

To create a query using the Simple Query Wizard

• In this example we will use the Northwind sample database. In the Database
window select Queries from the Objects list. Click the New button to display
a New Query dialog box.

• Select the Simply Query Wizard option and then click on the OK button to
move to the next wizard page.

FOR USE AT THE LICENSED SITE(S) ONLY

To select fields which you wish to add to your simple query

• Another dialog box will be displayed. Click on the down arrow in the
Tables/Queries text box to display available queries and tables from which
you can select the fields of interest to you. In the example below, we have
selected the Products table.

• To add a field, select the field and click on the right-pointing arrow.

• In the example below, we have added ProductID, ProductName and

UnitsInStock.

• When you have finished adding fields, click on the Next button, the dialog
box below is displayed.

FOR USE AT THE LICENSED SITE(S) ONLY

• Click on the Next button to continue.

• Give the query a name, using the dialog box illustrated below.

• Click on the Finish button to complete the query.

FOR USE AT THE LICENSED SITE(S) ONLY

NOTE: In the above example, fields from only one table were selected. This
illustrates the principle. Remember that you can select additional fields from
other queries and tables, not just from a single table!

Create and name a two-table query with specified criteria

• Again we will use the Northwind sample database in this example. Creating a
two-table query is much the same as a simple single table query.
• In the Database window select the Queries from the Objects list.
• Click the New button to display a New Query dialog box.

• Select the Simply Query Wizard option then click on the OK button to
move to the next wizard page.

FOR USE AT THE LICENSED SITE(S) ONLY

• As we saw in the previous section, the first page of the Simple Query Wizard
allows you to specify which fields are included in the query. You can add
fields from more than one table by selecting an alterative table from the
Tables/Queries list.

• In the example above we first selected the Customers table and added the
fields CustomerID, CompanyName, ContactFirstName and ContactLastName.
We then selected the Orders table and selected the fields
PurchaseOrderNumber and RequiredByDate.
• Proceed through the rest of the Simple Query Wizard as before.

5.4.2.2 Add criteria to a query using any of the following operators: <
(Less than), <= (Less than or equals), > (Greater than), >= (Greater than
or equals), = (Equals), <> (Not equal to), And, Or.

To create a query without the wizard

• Access provides a number of wizards to help you with the definition of your
queries. However there are many instances where a wizard is not applicable
and you will need to create a query in design view. This view allows you to
specify which fields you want to see and what criteria to use in the query.

FOR USE AT THE LICENSED SITE(S) ONLY

• Select Design View from the New Query dialog box. Access then opens the
Query Grid and displays the Show Tables window on top. The Show Tables
window allows you to select the table (or tables) upon which you wish to
perform a query.

To use the query grid

• One or more tables can be included in your query. In addition other queries
can be included in the new query you are creating. A combination of tables
and queries can also be used. The required fields can be selected by dragging
them onto the grid, double-clicking on them or by selecting them from the
Field row. Specifying criteria or filters for specific fields can restrict query
output.

• Queries can be sorted by one or more fields using the Sort row. Click on the
Sort row to select from the options of Ascending or Descending. Sorting
works from the left to right if you have more than one column specified. If
you wish to return a column to its natural order, select ‘not sorted’ from the
Sort options.

• Highlighting columns and dragging can change the order of fields displayed in
the answer to the query.

• You may wish to include some fields in the query but not in the answer. This
may be useful if you need to specify criteria or a sort order for a particular
column, but do not need to see the data displayed for that column in the
answer. The Show tick box will be ticked by default when you add a field to
the query grid, but you can deselect the field by clicking on this tick box.

To run a query
• When you have built up all the elements of you query, you can run it by
clicking on the Run icon.

FOR USE AT THE LICENSED SITE(S) ONLY

Logical operators in criteria

• The use of logical operators enables you to specify complex criteria for
searching your tables. Whilst they are fairly straightforward to understand it
makes good sense to clarify how they can be used in Access.

To search using wildcard characters

• If you are not sure of all of the characters in your search string (i.e. the value
you enter in the Find What box) you can use wildcard characters as a
substitute. They are as follows:

FOR USE AT THE LICENSED SITE(S) ONLY

Specifying more complex criteria

• The query grid also allows you to specify complex search criteria.

You may enter criteria on more than one field: for example, you may wish to
list all products which have a name beginning with the letter C and have a
stock level of over 20. It is the combination of these two criteria which is
applied when you run the query. You can enter criteria on as many columns
as you wish. In addition you may wish to specify two or more alternative
criteria. For example, you may wish to see all the products which begin with
the letter B or the letter C. You can specify as many alternative criteria as
you wish.

Combining criteria
• You can also have a combination of multiple criteria and alternative criteria.
For example you may wish to see all the products which begin with the letter
C and have a stock level of over 20 or begin with the letter B regardless of

FOR USE AT THE LICENSED SITE(S) ONLY

their stock level. Note that the Or row applies to the whole query not just one
column: for example if you wish to see all the products which begin with the
letter C and have a stock level of over 20 or begin with the letter B and also
have a stock level of over 20 (note the slight difference in the previous
example) then you would need to repeat the >20 criteria under UnitsInStock
in the Or row.

5.4.2.3 Edit a query by adding, removing criteria.

To add criteria to a query

• Open the Database window.
• Select Queries from the Objects list.
• Right click on the name of the query you wish to edit and select the Design
View command from the pop-up menu.
• Locate the field on which your new criteria will be applied. Click within the
Criteria row for that field.
• You can now either type your criteria into the Criteria box or right click and
select Build from the pop-up menu to use the Expression Builder.
• In the example below we have entered a criteria of >20 for the
UnitsInStock field. Therefore, when the query is run only records where
UnitsInStock is greater than 20 will be displayed.

To remove criteria from a query

• Open the Database window.

FOR USE AT THE LICENSED SITE(S) ONLY

• Select Queries from the Objects list.

• Right click on the name of the query you wish to edit and select the Design
View command from the pop-up menu.
• Position your mouse pointer just inside the left hand edge of first field, in line
with the criteria row you wish to delete. The mouse pointer will change to a
small black arrow pointing to the right, as illustrated.

• Click once with your mouse button. The row will be selected.
• To delete this criteria row, press the Delete key.

5.4.2.4 Edit a query: add, remove, move, hide, unhide fields.

To add a field to a query

• Open the Database window.
• Select Queries from the Objects list.
• Right click on the name of the query you wish to edit and select the Design
View command from the pop-up menu.
• Click within an unused Field text box. A down arrow will appear in the right
of the text box.
• Click on the arrow to display a list of fields, select the field you require from
the list.

To remove a field from a query

• Display the query in Design View.
• Double click within the Field text box containing the name of the field you
wish to delete. The field name will be selected.
• Press the Delete key.
• Press the Enter key.

FOR USE AT THE LICENSED SITE(S) ONLY

To move a field in a query

• Display the query in Design View.
• Position your mouse pointer on the field selection button located just above
the field name.
• Your mouse pointer will change to a small downward pointing arrow, as
illustrated.

• Click once with the left mouse button to select that field.
• Once again click on the field selection button, only this time keep the mouse
button depressed and drag the field left or right to your desired location. A
thick black vertical bar to the left of the field column indicates where the field
will be moved to.
• Release the mouse button to drop the field at the new location.

To hide a field in a query

• Display the query in Design View.
• Each field in the query has an associated Show check box. To hide the field,
clear the Show check box.

To show a field in a query

• Display the query in Design View.
• Each field in the query has an associated Show check box. To show the field,
select the Show check box.

5.4.2.5 Run a query.

FOR USE AT THE LICENSED SITE(S) ONLY

To run a query
• Open the Database window.
• Select Queries from the Objects list.
• Select the query within the main Database window and double click on the
query. In some cases you may have to enter information, such as from and
till dates.

5.4.2.6 Delete a query.

To delete a query
• Select the query within the Database window, as in the example below
where we have selected the Sales by Year query.

• Once selected, press the Delete key. A warning dialog will be displayed.

FOR USE AT THE LICENSED SITE(S) ONLY

If you click on Yes the query will be deleted.

5.4.2.7 Save and close a query.

To save a query
• Click on the File drop down menu and select the Save command.

To close a query
• Click on the Close icon (top-right of the window).

5.4.3 Sort Records

5.4.3.1 Sort data in a table, form, query, in ascending/descending and

numeric/alphabetic order.

Sorting records
• If you want your records in a different order, you can use Quick Sort. You
might, for instance, hold your employee records by employee reference
number but want to view them in alphabetical order of surname.

In a table Datasheet, you can use more than one adjacent sort field but in a
form you are limited to one sort field only. If you select more than one field
in a Datasheet, the leftmost field is the primary sort field. Therefore you
might need to rearrange the order of your columns before sorting.

To sort records in a table datasheet

• Select the column or columns on which you want to sort your records.
• Choose Sort from the Records menu and select Sort Ascending or Sort
Descending from the sub-menu

OR click on the Sort Ascending or Sort Descending icons on the standard

toolbar.

FOR USE AT THE LICENSED SITE(S) ONLY

Note: An ascending sort arranges the Datasheet with the lowest value first,
i.e. 0 to 9 and A to Z. A descending sort does the opposite.

To sort records in a form or query

• Select the fields on which you want to base your sort.
• Click on the Sort Ascending or Sort Descending icons on the standard
toolbar.

FOR USE AT THE LICENSED SITE(S) ONLY

5.5 Reports

5.5.1 Working with Reports

Introduction to reports
• Your first step in creating a database should be to establish what you want
from it, i.e. the output. Output is normally information displayed either on-
screen, or printed. A screen display is usually a Datasheet or a form and is
the response to an interactive query or command. Forms can also be printed,
but for most purposes, printed reports are the best way to provide hard copy
output. This is particularly so for information covering several records,
especially when summary information is also required.

You can use reports for a variety of purposes: some common examples are
periodical sales summaries, stock lists, mailing lists and invoices.

The easiest way to produce your own reports is by using the Microsoft Access
wizards. There is a choice of different reports. Easiest of all is the AutoReport
Wizard, which constructs the whole report according to your instructions. You
can also choose single column, Groups/Totals, Mailing Labels, Summary and
Tabular reports.

Grouping allows you to identify and organise data into logical groups and to
provide group and grand totals. Up to a maximum of ten groups are allowed.
You can also include a sub-report as part of your report.

Before attempting any report design of your own, it would be a good idea to
explore some of the reports from the Northwind database supplied with
Microsoft Access. You can look at them in print preview and design mode to
get an idea of how they are constructed.

5.5.1.1 Create and save a report based on a table, query.

To create a columnar report using AutoReport Wizard

• Open a database and click on the Reports from the Objects list in the
Database window. Click on the New button.

FOR USE AT THE LICENSED SITE(S) ONLY

• Select the table or query where the objects data comes from. In the example
shown we have selected Customers from the Northwind database.
• Select AutoReport: Columnar.

• Click on the OK button and the column formatted report will be generated
and displayed on the screen.

To create a tabular report using AutoReport Wizard

• Open a database and click on the Reports from the Objects list in the
Database window.

FOR USE AT THE LICENSED SITE(S) ONLY

• Click on the New button.

• Select the table or query where the objects data comes from. In the example
shown we have selected Customers from the Northwind database.
• Select AutoReport: Tabular.
• Click on the OK button and the table formatted report will be generated and
displayed on the screen.

To create a report using Report Wizard

• Open the Database window.
• Select the Reports from the Objects list.

FOR USE AT THE LICENSED SITE(S) ONLY

• Click on the New icon, which displays the New Report dialog box.

• Select the table or query on which you want the report based.
• Select the Report Wizard.
• Click on the OK button. The next page of the Report Wizard is displayed.

• If necessary select a table or query in the Tables/Queries section of the

dialog box.

To select which fields to add to a report

• Click on the field which you require and click on the right pointing arrow to
add the field to the Selected Fields section of the dialog box.
• Repeat this procedure to add the fields which you require within the report.
In the illustration below, based on the Northwind database, we have added
CustomerID, CompanyName, ContactName and Phone.

FOR USE AT THE LICENSED SITE(S) ONLY

• Click on the Next button to continue.

To add grouping levels to a report

• The next page which is displayed allows you to add grouping levels.

• In this example we have clicked on the Next button to continue to the next
page of the Report Wizard.

To sort records within a report

• This page of the Report Wizard allows you to sort your records by up to four
fields, in either ascending or descending order.

FOR USE AT THE LICENSED SITE(S) ONLY

• In this case we have chosen to sort first by CompanyName and then by

Phone, as illustrated.

• Click on the Next button to continue to the next page.

To determine the layout of a report

• The next page of the Report Wizard allows you to determine the layout of
the report.
• You can select a Columnar, Tabular or Justified layout.
• You can set the page orientation to Portrait or Landscape.
• You can automatically adjust the field width so that all the fields fit on
the page.

FOR USE AT THE LICENSED SITE(S) ONLY

• When you have selected the options you require, click on the Next button to
continue to the next page of the Report Wizard

To determine the style of a report

• The next page of the Report Wizard allows you to select from a range of
styles, Bold, Casual, Compact, Corporate, Formal or Soft Gray.

• When you have selected the required style, click on the Next button to
continue to the next page of the Report Wizard.

To name a report
• The next page of the Report Wizard is the final page, which allows you to
give a name to the report.

FOR USE AT THE LICENSED SITE(S) ONLY

• Enter the report name in the top text box.

• By default the Preview this report button is selected.
• Click on the Finish button to generate and preview the report.
• The final report is displayed on the screen, as illustrated.

5.5.1.2 Change arrangement of data fields and headings within report

layout.

To alter the position of fields and headings in a report

• Open the report you wish to edit and switch to Design View. The Report
window should now resemble the illustration below:

FOR USE AT THE LICENSED SITE(S) ONLY

• The fields displayed by the report are shown beneath the Detail bar,
represented by a box containing the field name. To move a field drag & drop
the field box to the desired location in the Detail area.
• The field headings are defined in the Page Header section. To move a
heading drag & drop the heading box to the desired location in the Page
Header area. Normally the heading should line up with the associated field in
the Detail section to make the report easy to read.
• Switch back to Report View to see the results of your changes.

5.5.1.3 Group data under a specific heading (field) in a report in

ascending, descending order.

To group information in a report

• Display the report in Design View.
• Select the Sorting and Grouping command from the View drop down
menu. The Sorting and Grouping dialog box will be displayed.

• Click within the Field/Expression column and select the field you want to
apply grouping to from the menu.

FOR USE AT THE LICENSED SITE(S) ONLY

• By default the field will be sorted into ascending order. To change this click
within the Sort Order column and choose Descending from the menu.
• Close the Sorting and Grouping dialog box by clicking on the Close icon in
the top right of the dialog box.
• Switch back to Print Preview view to see the result of your sorting.

5.5.1.4 Present specific fields in a grouped report by sum, minimum,

maximum, average, count, at appropriate break points

To calculate statistics for groups in a report

• Display the report in Design View.
• Select the Sorting and Grouping command from the View drop down
menu. The Sorting and Grouping dialog box will be displayed.
• Use the Sorting and Grouping dialog box select the field you wish to group
by.
• Enable the Group Footer option in the Group Properties area of the dialog
box. This will cause Access to add a footer area beneath each group into
which you can add totals for the group, etc.

• Close the Sorting and Grouping dialog box by clicking on the Close icon in
the top right of the dialog box.

• In this example we have grouped the report using the CustomerID field and
Access has created a CustomerID Footer area.

FOR USE AT THE LICENSED SITE(S) ONLY

• Select the Text Box tool from the Toolbox. If the Toolbox is not displayed,
select Toolbox from the View drop down menu.

• Click and drag your mouse within the Group Footer area to create the text
box.

FOR USE AT THE LICENSED SITE(S) ONLY

• Access will automatically create a label for the text box containing the text
TextXX:. Click on this label and edit the text as required, for this example we
have entered the text Total:.
• For this example we want to total the value of all the orders in a customer
group. To do this, click on the text box containing the text Unbound and
enter the following formula:

• When you view the report in Print Preview view you will now find that the
report is grouped by customer with the total value of the customers orders
displayed beneath the order details.
• There are other formulas which could also be used:

=Min([OrderValue]) : This would display the cost of the order with the
least value placed by a customer.

=Max([OrderValue]) : This would display the cost of the order with the
most value placed by a customer.

=Avg([OrderValue]) : This would display the average value of the orders

placed by a customer.

=Count([OrderValue]) : This would display the count the number of orders

placed by a customer.

FOR USE AT THE LICENSED SITE(S) ONLY

5.5.1.5 Add, modify text into Headers, Footers in a report.

To add text to a report header or footer

• Open the report you wish to edit and switch to Design View. The Report
window should now resemble the illustration below:

• Text must be added beneath either the Report Header or Report Footer
bars. If the Report Header or Report Footer bars are not visible, select the
Report Header/Footer command from the View drop down menu.
• If there is no space beneath the bar into which you can enter text. Move the
mouse to the bottom edge of either the Report Header or Report Footer
bar at the top or bottom of the Report window, your mouse pointer will
change into a double-headed arrow. Click and drag the mouse downward to
expand the header or footer section. You should now have space into which
you can enter your text.
• Select the Label tool from the Toolbox. If the Toolbox is not displayed,
select Toolbox from the View drop down menu.

• Click within the report header or footer section at the location you want to
insert your text.
• Key in your text.
• Switch back to Print Preview view to see the results of your changes.

FOR USE AT THE LICENSED SITE(S) ONLY

To modify text within a report header or footer

• Open the report you wish to edit and switch to Design View.
• Click on the text in the header or footer which you wish to edit.
• Use standard editing techniques to modify the text.
• Switch back to Report View to see the results of your changes.

5.5.1.6 Delete a report.

To delete a report
• Open the Database window.
• Select Reports from the Objects list.
• Select the report within the Database window. Press the Delete key. A
warning dialog box will be displayed. Click on the Yes button to confirm the
deletion.

5.7.1.7 Save and close a report.

To save a report
• Click on the File drop down menu and select the Save command.

To close a report
• Click on the Close icon (top-right of the window).

FOR USE AT THE LICENSED SITE(S) ONLY

5.6 Prepare Outputs

5.6.1 Prepare to Print

5.6.1.1 Preview a table, form, report.

To preview a table, form or report, prior to printing

• Display the table, form or report on your screen.
• Select Print Preview from the File menu.

The page will be displayed as it would print, as illustrated.

• Notice that a new set of toolbar icons are displayed. Click on the Close icon
to return to the previous view of the page.

5.6.1.2 Change report orientation: portrait, landscape. Change paper

size.

To change a reports orientation

• Display the report on your screen.
• Click on the File drop down menu and click on the Print Setup command.
This will display a dialog box.
• Click on the Page tab within this dialog box, as illustrated.

FOR USE AT THE LICENSED SITE(S) ONLY

• Within the Orientation section of this dialog box, select either Landscape or
Portrait, as required.
• Click on the OK button.

5.6.2 Print options

5.6.2.1 Print a page, selected record(s), complete table.

To set what you want to print

• Display the table which you wish to print from.
• Click on the File drop down menu and select Print, which will display the
Print dialog box.

To print a page: Within the Print Range section of the dialog box, enter the
page number of page(s) which you wish to print.

FOR USE AT THE LICENSED SITE(S) ONLY

To print selected records: Within the Print Range section of the dialog box,
click on Selected Record(s). This option assumes that you have selected
the records which you wish to print, prior to opening the Print dialog box.

To print the entire table: Within the Print Range section of the dialog box,
click on All.

• Click on the OK button to start printing.

5.6.2.2 Print all records using form layout, specific pages using form
layout.
• Display the form which you wish to print from.
• Click on the File drop down menu and select Print, which will display the
Print dialog box.

To print a page:
Within the Print Range section of the dialog box, enter the page number of
page(s) which you wish to print.

To print selected records:

Within the Print Range section of the dialog box, click on Selected
Record(s). This option assumes that you have selected the records which
you wish to print, prior to opening the Print dialog box!

To print all records:

Within the Print Range section of the dialog box, click on All.

• Click on the OK button to start printing.

FOR USE AT THE LICENSED SITE(S) ONLY

5.6.2.3 Print result of a query.

To print a query
• Display the query which you wish to print from.
• Click on the Print icon to print the entire query. If you wish to print only part
of the query, click on the File drop down menu, select the Print command,
and within the dialog box displayed select what you wish to print.

5.6.2.4 Print specific page(s) of a report, complete report.

• Display the report which you wish to print from.
• Click on the File drop down menu and select Print, which will display the
Print dialog box.

To print a page:
Within the Print Range section of the dialog box, enter the page number of
page(s) which you wish to print.

To print selected records:

Within the Print Range section of the dialog box, click on Selected
Record(s). This option assumes that you have selected the records which
you wish to print, prior to opening the Print dialog box!

To print all records:

Within the Print Range section of the dialog box, click on All.

• Click on the OK button to start printing.

To print a table, query or report to a file

• Display the table, query or report which you wish to print to a file.
• Click on the File drop down menu and select the Print command.

FOR USE AT THE LICENSED SITE(S) ONLY

• Within the dialog box, select the Print to file check box.

• Click on the OK button.

• A dialog box will be displayed in which you can enter the file name.

• Click on the OK button to save the file.

FOR USE AT THE LICENSED SITE(S) ONLY

Statistics
No ratings yet
Statistics
212 pages
Learning Microstation VBA PDF
No ratings yet
Learning Microstation VBA PDF
933 pages
Programmer 1 & 2 PDF
No ratings yet
Programmer 1 & 2 PDF
265 pages
Vba 00
No ratings yet
Vba 00
14 pages
Module 1 - Basic Concepts of Information Technology (IT)
100% (13)
Module 1 - Basic Concepts of Information Technology (IT)
74 pages
Icdl-Module2 Using The Computer & Managing Files
No ratings yet
Icdl-Module2 Using The Computer & Managing Files
84 pages
Module 4 - Spreadsheets (Excel)
50% (2)
Module 4 - Spreadsheets (Excel)
86 pages
New ICDL Quick Reference
No ratings yet
New ICDL Quick Reference
32 pages
XII Mathematics Pre Board-1 Set-A (2022-23) CRPF SCHOOL
No ratings yet
XII Mathematics Pre Board-1 Set-A (2022-23) CRPF SCHOOL
7 pages
ICDL Syllabus Version 5.0
No ratings yet
ICDL Syllabus Version 5.0
37 pages
ICDL Spreadsheets 2016 6.0 - Nairobi Institute of Business Studies (NIBS) - Thika Road Campus (1)
No ratings yet
ICDL Spreadsheets 2016 6.0 - Nairobi Institute of Business Studies (NIBS) - Thika Road Campus (1)
214 pages
Unit 1 Study Guide
No ratings yet
Unit 1 Study Guide
7 pages
Mulizambia 2 PDF
No ratings yet
Mulizambia 2 PDF
549 pages
The Test Is Complete: Enlightks Ecdl/Icdl - Spreadsheets 5.0 - Excel 2007 - Diag. Eng
100% (2)
The Test Is Complete: Enlightks Ecdl/Icdl - Spreadsheets 5.0 - Excel 2007 - Diag. Eng
9 pages
Chapter 2 - Accounting Equation and Double Entry
No ratings yet
Chapter 2 - Accounting Equation and Double Entry
10 pages
Real Number Systems
No ratings yet
Real Number Systems
18 pages
Prepking ICDL-IT Exam Questions
No ratings yet
Prepking ICDL-IT Exam Questions
11 pages
ICDL Spreadsheets QRG 2016 6.0 - v1.0
No ratings yet
ICDL Spreadsheets QRG 2016 6.0 - v1.0
4 pages
03 - Review of Probabilistic Models
No ratings yet
03 - Review of Probabilistic Models
34 pages
Microcomputer Lab Manual
No ratings yet
Microcomputer Lab Manual
6 pages
ICDL Advanced Word Processing 2016 3.0 - QRG
No ratings yet
ICDL Advanced Word Processing 2016 3.0 - QRG
5 pages
Worldwide Sporting Goods Product Sheet: Product - by Order of Sales
No ratings yet
Worldwide Sporting Goods Product Sheet: Product - by Order of Sales
1 page
Sample - Powerpoint 2016 Advanced Training Manual Usa
No ratings yet
Sample - Powerpoint 2016 Advanced Training Manual Usa
194 pages
Introduction To Spreadsheet Modeling - Winston Albright
No ratings yet
Introduction To Spreadsheet Modeling - Winston Albright
46 pages
Icdl Workforce Word Processing. Syllabus 6.0. Learning Material (Ms Word 2013) Provided by - E-Tech Complete Solutions Limited
No ratings yet
Icdl Workforce Word Processing. Syllabus 6.0. Learning Material (Ms Word 2013) Provided by - E-Tech Complete Solutions Limited
178 pages
Inquiry Lesson Plan Template
No ratings yet
Inquiry Lesson Plan Template
4 pages
ICT3715 November 2022
No ratings yet
ICT3715 November 2022
15 pages
VBA Lecture Part 1
No ratings yet
VBA Lecture Part 1
19 pages
Payroll PDF
0% (1)
Payroll PDF
15 pages
How The BusinessObjects System Works
No ratings yet
How The BusinessObjects System Works
210 pages
Chapter 4 Heat Students
No ratings yet
Chapter 4 Heat Students
33 pages
Excel 2016 Intermediate
0% (1)
Excel 2016 Intermediate
157 pages
A Level Computer Science Wider Reading
0% (1)
A Level Computer Science Wider Reading
2 pages
Pexip_Infinity_Hyper-V_Installation_Guide_v36.a
No ratings yet
Pexip_Infinity_Hyper-V_Installation_Guide_v36.a
18 pages
Solving Sudoku Using Excel
No ratings yet
Solving Sudoku Using Excel
8 pages
Bamboodev 310811 0154 44
No ratings yet
Bamboodev 310811 0154 44
166 pages
Corel Draw Presentation
No ratings yet
Corel Draw Presentation
20 pages
VBA Programming Charts
No ratings yet
VBA Programming Charts
2 pages
Excel 2007 Advanced Training Manual
100% (4)
Excel 2007 Advanced Training Manual
172 pages
ERS 220 - 2016 Study Guide
No ratings yet
ERS 220 - 2016 Study Guide
14 pages
XL Wings
No ratings yet
XL Wings
214 pages
Spring 2024 Exam Changes Member Board Memo
No ratings yet
Spring 2024 Exam Changes Member Board Memo
3 pages
Mod7 CVX CVXOPT
No ratings yet
Mod7 CVX CVXOPT
69 pages
XDS - Modula 2.IDE - User.guide - en
No ratings yet
XDS - Modula 2.IDE - User.guide - en
61 pages
Map Basic Tutorial
No ratings yet
Map Basic Tutorial
17 pages
ICDL Module 4 PDF
100% (2)
ICDL Module 4 PDF
76 pages
Ecdl Mod5
No ratings yet
Ecdl Mod5
106 pages
Ecdl Mod3
No ratings yet
Ecdl Mod3
109 pages
Module 3 - Word Processing (Word)
100% (2)
Module 3 - Word Processing (Word)
102 pages
icdl-module3 Word Processing
No ratings yet
icdl-module3 Word Processing
85 pages
Sample Ecdl v4 Mod6 Office 2003 Manual
No ratings yet
Sample Ecdl v4 Mod6 Office 2003 Manual
94 pages
Module 2 - Using The Computer and Managing Files
100% (2)
Module 2 - Using The Computer and Managing Files
101 pages
Ecdl Mod4
No ratings yet
Ecdl Mod4
91 pages
ECDL Module 7: Reference Manual Information & Communication
No ratings yet
ECDL Module 7: Reference Manual Information & Communication
74 pages
Module 6 - Presentation PowerPoint
No ratings yet
Module 6 - Presentation PowerPoint
89 pages
ECDL Module 3: Reference Manual Word Processing
No ratings yet
ECDL Module 3: Reference Manual Word Processing
106 pages
Ecdl Module 2
No ratings yet
Ecdl Module 2
105 pages
icdl-module4 Spreadsheets Excel
No ratings yet
icdl-module4 Spreadsheets Excel
113 pages
ECDL Module 4: Reference Manual
No ratings yet
ECDL Module 4: Reference Manual
85 pages
ECDL Module 1
No ratings yet
ECDL Module 1
78 pages