How To Configure Huawei Router-On-A-stick

How to Configure Huawei router-on-a-stick
Requirements: The range on the host broadcast domain of communication can be

reduced by VLAN configuration to the switch on the LAN. You can use a router that
supports 802.1 to rea!i"e interoperabi!ity of VLAN on the condition that part of the hosts
need to communicate among VLAN whi!e the switches doesn#t support the three$!ayer
switch% which re&uires the estab!ishment of a sub$interface on the 'thernet port%
assignment of the () address as the re!ated VLAN gateway% and start 802.1 at the
same time.
Networking: *onnect '0 port of the router with up!in+ trun+ port ,2-th ports. of the
switch on the router% and di/ide 0 VLAN on switch downward port with se/era! hosts.
Configuration of the routers
12outer3
12outer3inter e0
12outer$'thernet03ip add 10.0.0.1 244.244.244.0
12outer$'thernet03inter e0.1 55 6efine '0.1 sub$interface
12outer$'thernet0.13ip add 172.18.1.1 244.244.244.0
12outer$'thernet0.13/!an$type dot1& /id 1 559pecify the 'thernet sub$interfaces
be!onging to VLAN1% and this command is app!ied to the 'thernet sub$interface. :n!y this
command is configured% the 'thernet sub$interface wi!! be embedded VLAN tag in the
'thernet frame header according to the configuration of the VLAN (6 number so that the
switch port connected to the switch interface can dea! with the recei/ed frame correct!y
on!y the command has been configured.
12outer$'thernet0.13inter e0.2 55 6efine '0.2 sub$interface
12outer$'thernet0.23/!an$type dot1& /id 2 55 9pecify the 'thernet sub$interfaces
be!onging to VLAN2
12outer$'thernet0.23inter e0.0 55 6efine '0.0 sub$interface
12outer$'thernet0.03/!an$type dot1& /id 0 55 9pecify the 'thernet sub$interfaces
be!onging VLAN0
12outer$'thernet0.03inter e0
12outer$'thernet03undo shut
; (nterface 'thernet0 is up
12outer$'thernet03 55*onnect the '0 port with the 2-
th
port of 90028 with the
networ+ cab!e
;1<=-8=02= (nterface 'thernet0 changed state to >)
;1<=-8=02= Line protoco! ip on interface 'thernet0% changed state to >)
1
;1<=-8=02= Line protoco! ip on interface 'thernet0.1% changed state to >)
Configuration of the switches
?uidway@
?uidway@sys
'nter system /iew % return user /iew with *tr!AB.
1uidway3/!an 1
1uidway$/!an13/!an 2
1uidway$/!an23port ethernet 0517 to eth 051< eth 0522 55Add the port from 17th to 1<th
and 22
nd
to VLAN2
1uidway$/!an23/!an 0
1uidway$/!an03port eth 0521 55 Add the 21
st
port to VLAN0
1uidway$/!an03inter e052-
1uidway$'thernet052-3port !in+$type trun+ 559et the 2-
th
port to be trun+ port
1uidway$'thernet052-3port trun+ permit /!an a!!

55 A!!ow a!! VLAN f!ow pass through
)!ease wait........................................... 6one.
1uidway$'thernet052-3dis port trun+ 55 *hec+ out the T2>NC port configuration
Now% the fo!!owing trun+ing ports eDist=
'thernet052-
1uidway$'thernet052-3dis /!an 2

55 *hec+ out the VLAN2 configuration
VLAN (6= 2
VLAN Type= static
2oute (nterface= not configured
6escription= VLAN 0002
Tagged )orts=
'thernet052-
>ntagged )orts=
'thernet0517 'thernet0518 'thernet051< 'thernet0522
1uidway$'thernet052-3dis /!an 0

55 *hec+ out the VLAN0 configuration
VLAN (6= 0
VLAN Type= static
2oute (nterface= not configured
6escription= VLAN 0000
Tagged )orts=
'thernet052-
>ntagged )orts=
'thernet0521
2
*hec+ the networ+ connecti/ity on the wor+station. This wor+station is connected to the
21st port of 90028% be!onging to VLAN2.
*=E6ocuments and 9ettingsEAdministrator@ipconfig
windows 2000 () *onfiguration
'thernet adapter Loca! connection=
*onnection$specific 6N9 9uffiD . =
() Address. . . . . . . . . . . . = 172.18.2.22
9ubnet Fas+ . . . . . . . . . . . = 244.244.244.0
6efau!t Gateway . . . . . . . . . = 172.18.2.1
*=E6ocuments and 9ettingsEAdministrator@ping 172.18.0.1
)inging 172.18.0.1 with 02 bytes of data=
2ep!y from 172.18.0.1= bytesH02 time?10ms TTLH244
)ing statistics for 172.18.0.1=
)ac+ets= 9ent H -% 2ecei/ed H -% Lost H 0 ,0; !oss.%
ApproDimate round trip times in mi!!i$seconds=
Finimum H 0ms% FaDimum H 0ms% A/erage H 0ms
View the routing tab!e on the router% can be found% as each of the networ+ segments on
the 172.18 are connected to the router direct!y% so the communication between the VLAN
can be rea!i"ed without starting the routing protoco!s or static routing.
12outer3disp!ay ip routing$tab!e
2outing Tab!es=
6estination5Fas+ )roto )ref Fetric NeDthop (nterface
10.0.0.052- 6irect 0 0 10.0.0.1 'thernet0
10.0.0.1502 6irect 0 0 127.0.0.1LoopIac+0
127.0.0.058 6irect 0 0 127.0.0.1 LoopIac+0
127.0.0.1502 6irect 0 0 127.0.0.1 LoopIac+0
172.18.1.052- 6irect 0 0 172.18.1.1 'thernet0.1
172.18.1.1502 6irect 0 0 127.0.0.1 LoopIac+0
172.18.2.052- 6irect 0 0 172.18.2.1 'thernet0.2
172.18.2.1502 6irect 0 0 127.0.0.1 LoopIac+0
172.18.0.052- 6irect 0 0 172.18.0.1 'thernet0.0
172.18.0.1502 6irect 0 0 127.0.0.1 LoopIac+0
More related:
Jow to *onfigure Juawei router$on$a$stic+
'Damp!e for *onfiguring the Netstream Kunction to Account >ser Traffic
3
'Damp!e for *onnecting (ntranet >sers to the (nternet in NAT Address )oo! Fode
'Damp!e for *onnecting (ntranet >sers to the (nternet in NAT Address )oo! Fode
The !atest /ersion of Juawei switch configuration commands= router command
More Huawei products and Reviews you can visit: http=55www.huanetwor+.com5b!og
Juanetwor+.com is a wor!d !eading Juawei networ+ing products distributor% we who!esa!e
origina! new Juawei networ+ing e&uipments% inc!uding Juawei switches% Juawei routers%
Juaweisymantec security products% Juawei (A6% Juawei 9K) and other Juawei
networ+ing products. :ur customers inc!ude te!ecom operators% Juawei rese!!ers% (9)
and system integrators. 2ight now most of our sa!es are contributed by regu!ar
customers.
(n Juanetwor+ Lab% a!so we ha/e Juawei :LT% F6>% 69LAF and switch for customer do
remote testing% any potentia! customer are we!come to !ogin to our !ab. (f you need a tota!
Juawei KTTD so!ution or Juawei A69L so!ution for your networ+% a!so you may fee! free
to contact us.
:ur website= http=55www.huanetwor+.com
Te!ephone= A842$00401<-0
'mai!= sa!esLhuanetwor+.com
Address= 205K Luc+y )!a"a% 014$021 Loc+hart 2oad% Manchai% Jong+ong
4

How To Configure Huawei Router-On-A-stick

Uploaded by

Copyright:

Available Formats

How To Configure Huawei Router-On-A-stick

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

How To Configure Huawei Router-On-A-stick

Uploaded by

Copyright:

Available Formats

How to Configure Huawei router-on-a-stick

Requirements: The range on the host broadcast domain of communication can be

You might also like