Catalog

1999
-
2000 Product Sourcebook
1999
-
2000 Product Sourcebook
click on screen to continue
T A B L E O F C O N T E N T S
Introduction
Features & Benets
Cameron Ball Valves
Cameron Welded Body
Cameron Bolted Body
Cameron Standard & Alternative Seats
Cameron Sphere Launcher & Accessories
W-K-M Ball Valves
DynaSeal 370CT
DynaSeal 370D4 2"-6"x4"
DynaSeal 370D4 6"-14"x12"
DynaSeal 370E4
DynaSeal 310C 2-Piece
DynaSeal 310D
DynaSeal 210A/210L
DynaSeal 210F
Chokes & Couplings
Thornhill Craver Adjustable Chokes
Thornhill Craver Positive Chokes
UNIBOLT Couplings
Gate Valves
Foster D-Seal
W-K-M Pow-R-Seal
Saf-T-Gard Actuators for Foster D-Seal
Demco Series DM API/ANSI
Demco Series DM 7500
Demco Series DT/DB
Buttery Valves
W-K-M DynaCentric High Performance
Demco Series NE-C
Demco Valve Styles and Accessories
Applications
Gas and Liquids Pipelines
Oil and Gas Production
Industrial
Aftermarket Services
Product Specications Content
Cameron Ball Valves
Cameron All Welded Body Ball Valves
API Flanged End
W-K-M Ball Valves
DynaSeal 370CT
DynaSeal 370 Series
DynaSeal 370D4
DynaSeal 370E4
DynaSeal 310 Series
DynaSeal 210A
Ductile 210D
DynaSeal 210L
DynaSeal 210F
Chokes & Couplings
Ordering Information
Material Usage Guide
Choke Accessories
Force Balanced Chokes
Long Nose Heater Chokes
UNIBOLT Steam Chokes
Positive Choke Flow Beans
X Beans and Seat/Bean Wrenches
Choke Yoke Assemblies
Pneumatic Adapter Assemblies
UNIBOLT Couplings
Gate Valves
Foster D-Seal
W-K-M Pow-R-Seal
Demco Series DT
Demco Series DB
Buttery Valves
Demco Series NE-C, NE-I, NE-D, NEI-T 2"-12"
Demco Series NF-C 14"-24"
Weatherproof Gear Operators 2"-48"
DR Series Piston Actuators
Electric Actuators
Diaphragm Actuators
Stem Extensions, Tees and Adapters
General Technical Information
Phone Directory of Sales Ofces and Plants
Terms and Conditions
Trademarks
PRINT
CONTACT
www:
TECHNICAL DATA
CONTENTS MENU
CONTACT
HELP
I N T R O D U C T I O N
(p4) I N T R O D U C T I O N
(1962), patented Demco buttery valve
stem seals (1967) and re-tested, metallic
seat assemblies for W-K-M high perfor-
mance buttery valves, weve developed
and pioneered product features
that make our valves easier to
use and maintain, as well as
perform better for each
intended application.
Double warranted
performance
The quality of our
products is sec-
ond to none.
And for com-
plete assur-
ance, we
offer our
Double C
valve
warranty.
Every
new valve
we sell can
be backed for a full
two yearstwice the
standard guarantee of
other valve brands.
Double C Service goes the extra mile
Service makes the difference. And
with our Double C commitment to being
the most responsive, customer-focused
supplier in the business, its a difference
youll notice right away when you do busi-
ness with Cooper Cameron Valves. Our
Double C Service team of sales, engineer-
ing and support personnel work closely
with you to evaluate your project, deter-
mine the appropriate equipment needed
and make recommendations.
This is our rst attempt to gather all our
valve products into one catalog. Our goal
is to present all the information you need
clearly and concisely so its easy to nd
what youre looking for. We hope this
new sourcebook will help make
your job easier and that you wont
hesitate to let us know what you
think about ways to improve it in
the future.
Built for a broad range of
demanding applications
Cooper Cameron Valves
serves the needs of
the petroleum and
process industries
with a full
range of
ANSI and
API 6D
class valves,
chokes, actua-
tors and acces-
sories. Cameron,
W-K-M, Demco
and Foster valves, and
Thornhill Craver chokes are
available in a variety of sizes and pres-
sure ratings.
A history of accomplishment
Many of our industrys most important
product features have been designed by
Cooper Cameron engineers. From the
famous W-K-M through-conduit expand-
ing gate valve (1933) to Cameron all-
welded, forged body ball valves (1960),
W-K-M deep-pocketed seat ball valves
Whether its a single valve for a
corrosive environment or a complete fail-
safe system with remote actuation, we
have the products and expertise to ensure
reliable performance.
Well make sure your orders are
shipped and delivered on time, as well as
provide on-site installation, service and
repair anywhere in the world. And we
can even minimize your on-site inventory
expenses with just-in-time delivery of
equipment or parts.
Aftermarket: an important dimension
As the leader in aftermarket services, we
can give you more options than perhaps
any other valve supplier. Remanufactured
valves are available from our growing
number of aftermarket facilities where
valves from every manufacturer are fully
restored to specs. Your Cooper Cameron
Valves representative can advise you on
current availability of specic types and
sizes, but with our commitment to after-
market services, it is our goal to provide
you with a wider selection of viable
alternatives every time you call.
World class capabilities
The parent company of Cooper Cameron
Valves, Cooper Cameron Corporation, is
truly an international company, with cur-
rent assets of more than $1 billion and
major manufacturing or service facilities
in more than a dozen countries. Since
1833, Cooper Cameron products and
services have satised the diverse needs
of a worldwide customer base, under
virtually all operating conditions for a
wide variety of oileld, pipeline and
industrial applications.
Welcome to the Cooper Cameron
Valves Product Sourcebook
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
F E A T U R E S A N D B E N E F I T S
CAME RON W E L D E D B O D Y B A L L V A L V E S
One of the most trusted valves
in the petroleum industry, it
combines the strength of forged
components with a lightweight
and compact spherical design.
Cameron Welded Body Ball Valves satis-
fy ANSI 150 through 2500 and API 2000
through 5000 standards. Made of forged
steel to assure uniform ne grain structure
and toughness, they may be specied in
sizes from 2" to 56".
Engineered for heavy duty, mainte-
nance-free performance, the Cameron
Welded Body Ball Valve is commonly
selected for a number of applications,
including:
Gas transmission
Products pipeline
Measurements skids
Dehydration systems
Gas separation systems
Natural gas storage
Dryer service
NGL plants
NGL pipeline
Compressor stations
CO
2
services
Offshore
Subsea
The distinctive design of the
Cameron Welded Body Ball Valve gives
it maximum strength at minimum weight
as well as maximum resistance both to
pipeline pressures and stresses. The
compact, spherical design also eliminates
body anges, thus reducing overall size
and leak paths.
PTFE lip seal.
Stem sealant injection.
Floating seat ring with seat-to-ball seal.
Three seat arrangements available
(see pages 6 and 7).
PTFE delta seal.
Compact body design
gives maximum strength
with minimum weight.
Forged body and ball provides superior
ductility and strength for added safety.
Trunnions encased in PTFE-impregnated
stainless steel bearings for smooth
operation without lubrication.
Sealant port with
check valve permits
safe injection of
sealant for fast,
simple restoration
of tight shut-off.
Body bleed tting allows
double block and bleed
testing of valve seals in
either open or closed position.
SD-7669-96
(p5)
CONTENTS MENU
CONTACT
www:
PRINT
CONTACT
TECHNICAL DATA
HELP
(p6) F E A T U R E S A N D B E N E F I T S
Features/Benets
Stem seals
Delta and lip seals made of PTFE are
incorporated in the upper stem area.
PTFE is a low friction, non-deteriorating
material that is not subject to rapid
decompression explosion. Most valve
sizes have a provision for the injection
of sealant to establish a secondary seal.
Trunnion supported ball allows
low torque operation
Regardless of size or pressure rating,
every Cameron ball valve is trunnion-
mounted. High strength forged stems are
located in PTFE-impregnated stainless
steel bearings for smooth, accurate opera-
tions. Trunnion mounted stems absorb the
thrust from line pressure, preventing
excess friction between the ball and seats,
so even at full rated working pressure,
operating torque stays low.
Double block and bleed
Whether in the open or closed position,
pressure on each side of the ball is blocked
from the body cavity by the seat ring. The
body cavity can then be blown down or
drained through the body port. When you
block and bleed a Cameron Ball Valve
the following can be accomplished:
Test Valve Integrity:
When Cameron Ball Valve body is
vented this veries the seat seals
integrity. This test can be preformed
with the valve open or closed prior to
facility maintenance. By verifying
valve integrity unforeseen valve leakage
can be prevented.
Replace Stem Seal:
In the unlikely event of a stem seal
needing replacement, it can be accom-
plished safely with the valve in service.
With the body cavity vented all line
pressure to the stem area is also vented.
(Please contact your Cooper Cameron
Valves Representative to obtain mainte-
nance procedures.)
Safeguard Downstream Work:
With the valve closed and the vent
tting open, the possibility of the line
media reaching a work area is removed.
Fire tested for safety
Cameron Ball Valves can be supplied
to API 6FAand API 607 standards.
Fire test programs are ongoing. If indus-
try standards change or customer require-
ments vary from above, call your Cooper
Cameron Valves representative.
Secondary seat seal
The sealant injection system provides a
fast, simple way of restoring tight shut-
off if any foreign object should damage
the sealing surfaces. The injection system
can also be used for routine ushing of
the seat ring area in services where this
may be required.
SPECIFICATIONS
Sizes
2"- 56"
Full bore, reduced bore, venturi bore
Pressure Classes
ANSI Class 150 thru 2500
API 2000 thru 5000
Operating Temperatures
From -50F to +375F(-46C to +190C)
End Connections
Flanged, weld, weld-by-ange
Body Styles
All welded
Standard Materials
Forged carbon steel
Optional Materials
A wide variety of seat/seal trims are
available upon request, including:
regular, corrosion-resistant and H
2
S
(NACE MRO1-75).
A
D
C
B
Valve Open
Valve Closed
See page 68 for technical specications.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
CAME RON B O L T E D B O D Y B A L L V A L V E S
The bolted body version of one
of the most trusted valves in the
petroleum industry, it combines
the strength of forged compo-
nents and eld serviceability.
The Cameron bolted body style valve is
constructed to allow eld service and
maintenance, if necessary. Its three-piece
trunnion mounted design to ANSI Class
150 through 1500 and satises API 2000
through 5000 standards. Made of forged
steel to assure uniform ne grain struc-
ture and toughness, it may be specied in
sizes from 2" to 56".
nance-free performance, The Cameron
bolted body ball valve is commonly
including:
Gas transmission
Natural gas storage
Dryer service
NGL plants
NGL pipeline
Compressor stations
CO
2
services
Offshore
Subsea
Diverters
Sealant port with check valve
permits safe injection of sealant
for fast, simple restoration of
tight shut-off.
Stem sealant injection.
Trunnions enclosed in PTFE-lined
bearings for smooth operation
without lubrication.
Body bleed tting allows
double block and bleed
testing of valve seals in
either open or closed
position.
Floating seat ring with
seat-to-ball seal. 3 seat
arrangements available
(see following pages).
Backseated stem.
(p7)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
CAME RON B O L T E D B O D Y B A L L V A L V E S
Features/Benets
Stem seals
Abackseated stem and three stem seals
are incorporated in the upper stem area.
One is a PTFE gasket and two are
O-rings. Valve sizes 6" and larger can
be provided with a provision for the
injection of sealant to establish a sec-
ondary seal.
Trunnion mounted stems absorb the
thrust from line pressure, preventing
excess friction between the ball and seats,
so even at full rated working pressure,
operating torque stays low. High strength
forged stems are enclosed in PTFE-lined
bearings for smooth, accurate operations.
Double block and bleed
Whether in the open or closed position,
pressure on each side of the ball is
blocked from the body cavity by the seat
ring. The body cavity can then be blown
down or drained through the body port.
When you block and bleed a Cameron
Ball Valve the following can be
accomplished:
Test Valve Integrity:
When Cameron ball valve body is
vented this veries the seat seals
integrity. This test can be performed
with the valve open or closed prior to
facility maintenance. By verifying valve
integrity unforeseen valve leakage can
be prevented.
Replace Stem Seal:
In the unlikely event of a stem seal
needing replacement, it can be accom-
plished safely with the valve in service.
With the body cavity vented, all line
pressure to the stem area is also vented.
(Please contact your Cooper Cameron
Valve Representative to obtain mainte-
nance procedures.)
Safeguard Downstream Work:
With the valve closed and the vent
tting open, the possibility of the line
media reaching a work area is removed.
Cameron ball valves can be supplied to
API 6FAand API 607 standards. Fire test
programs are usually ongoing. If industry
standards change or customer require-
ments are different from above, call your
Cooper Cameron Valves representative.
Secondary seat seal
The secondary seat seal sealant injection
system provides a fast, simple way of
restoring tight shut-off if any foreign
object should damage the sealing sur-
faces. The injection system can also be
used for routine ushing of the seat ring
area in services where this may be
required.
SPECIFICATIONS
Sizes
2"- 56"
Full bore, reduced bore, venturi bore
Pressure Classes
Class 150 thru 1500
From -50F to +375F(-46C to +190C)
End Connections
Body Styles
Bolted for take-apart
Standard Materials
Forged carbon steel
Optional Materials
A wide variety of seat/seal trims are
available upon request, including:
regular, corrosion-resistant and H
2
S
(NACE MRO1-75).
A
D
B
C
Valve Open
Valve Closed
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
CAME RON S T A N D A R D S E A T A R R A N G E M E N T S
In service since the early 60s,
the standard seat arrangement
has proven itself to be of sound
design. This arrangement is
available in all Cameron Ball
Valves and includes all features
and benets indicated on the
preceding pages.
Features/Benets
Upstream sealing
At low pressure, seat-to-ball contact is
maintained by Bellville springs. At higher
pressures, seat contact is reinforced by
line pressure.
Automatic internal relief of
body pressure
Relief of excess body cavity pressure is
automatic, avoiding dangerous pressure
build up. Any pressure exceeding down-
stream line pressure by approximately
200 psi pushes the downstream seat away
from the ball, allowing the pressure to
relieve into the pipeline.
Rotating seat rings
Astandard in the Welded Body Ball
Valve sizes 14" and larger, the Cameron
Ball Valve incorporates the exclusive
rotating seat feature. Both seats rotate 15
degrees each time the valve is closed,
exposing a new pinch point, and evenly
distributing seat wear.
Distribute seat wear
The pinch point is the area of the seat
insert that experiences an increased veloc-
ity when the valve is seated close and
unseated open. This is where the seat seal
experiences the most wear, and in most
valves where a leak path begins. By rotat-
ing the seat ring, the pinch point wear is
distributed throughout the seat seal pro-
viding a substantial increase of seat life.
Prevents build up
In some services a valve can experience
harmful sediment build up around the seat
ring. This can cause the seat to stick and
not seal properly. The Cameron ball valve
with the exclusive rotating seat can han-
dle these harsher services. As the seat
rotates it will break up or prevent any
build up.
Trapped Line
Pressure
Escaping
Pressure
Line
Pressure
SD-24087
SD-7808
(p9)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
CAME RON A L T E R N A T I V E S E A T A R R A N G E M E N T S
(p10)
SPECIFICATIONS
Double Acting - T32
Sizes
8" - 42"
Pressure Classes
Class 150 thru 1500
-50F to +250F (-46C to 121C)
SPECIFICATIONS
Metal-to-Metal - T33
Sizes
6"- 48"
Pressure Classes
Class 150 thru 600
-40F to +250F (-40C to 121C)
Designed to accommodate a
variety of applications and prefer-
ences, the double acting and
metal-to-metal seat arrangements
are available on both the Welded
body and Bolted body styles
shown on the preceding pages.
Double Acting
Conventional upstream sealing
With the upstream pressure, the bi-direc-
tional body-to-seat seal is pushed toward
the front sealing face of its retaining
pocket. This creates an unbalanced pres-
sure annulus between the body seal and
the inside diameter of the seat insert, forc-
ing the metal seat against the ball.
Downstream sealing
With the downstream pressure, the bi-
directional body-to-seat seal is pushed
toward the back sealing face of its retain-
ing pocket. This creates an unbalanced
pressure annulus between the outside
diameter of the seat insert and the body
seal diameter, also forcing the seat insert
against the ball.
Metal-to-Metal
Wide metal face seat
The unique primary seal is a wide, metal-
face prole machined into the body of the
seat. Unlike many other metal sealing
valves which have a narrow metal contact
area, the Cameron design ensures full
metal-to-metal bubble-tight sealing in
both directions and does not rely on sec-
ondary soft seal prone to damage.
Elastomer seal
Asmall elastomer seal held by the seat
ring performs two services. It wipes the
surface of the ball to prevent surface
damage while providing a bubble-tight
seal at low pressures.
See page 68 for
technical spec.
See page 68 for
technical spec.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
CAME RON I N - L I N E S P H E R E L A U N C H E R
Doubles as block valve
Because the launcher has all the features
of a standard Cameron ball valve, it can
double as a main block valve in virtually
any system.
Field preferred
The speed and ease of the Cameron
launching system make it the preferred
method among eld personnel.
Wide variety of sizes available
The Cameron launcher is available in
sizes to accommodate spherical pigs from
2" to 30" in diameter.
Accommodates multiple spheres
The launcher valve can be built with an
extended barrel, enabling the operator to
stack multiple pigs in the barrel and launch
them simply by operating the valve.
Additional options available
The following options can help tailor
the launcher to a variety of applications:
manual gear operators; pneumatic,
hydraulic, gas-over-oil and electric opera-
tors; addition of pup pipe (transition pipe).
Proven by years of service, the
Cameron in-line sphere launcher
offers many advantages over
traditional launcher systems.
Features/Benets
Cost effective
The launchers unique design greatly
reduces the cost of constructing a launch-
ing system. This design combines three
valves into one. Aconventional design
requires a main line block, launching, and
kicker valve. The Cameron In-line
launcher does the job of both the main
line block, and launching valve. The pig
is inserted directly into the main ow line
eliminating the need for a kicker valve.
Eliminating the need for two valves relat-
ed piping and supports produces an over-
all cost savings.
Easy installation
The Cameron design is simple and easy
to install. In an existing gathering system,
the Cameron launching valve is easily
inserted without major fabrication.
1. Valve is closed.
2. Valve body is vented.
3. Hinged door opens to load
sphere.
4. Extended barrel allows several
spheres to be loaded.
5. Door is closed.
6. Valve body is re-energized.
7. Valve is opened.
8. Spherical pig in launch position.
LAUNCHING SEQUENCE
(TOP VIEW)
(p11)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
CAME RON A C C E S S O R I E S
Quality Cameron accessories
are available to improve the
Cameron Ball Valves adaptability
to a wide variety of situations.
High head for remote operation
For situations in which the Cameron ball
valve must be underground, the Cameron
High Head makes the controls accessible
above ground. Designed and constructed
to withstand punishing environments, it
has proven itself in uses all over the
world for many years.
Subsea design offers important
benets
For the same reliable performance off-
shore as on, the Cameron Welded Body
Ball Valve is available with a coating and
actuation designed specically for the
demands of a subsea environment.
Right angle improves exibility
Cameron ball valves can be specied for
tight spaces when tted with a Cameron
Right Angle Extension. The valve control
is turned 90 degrees from its usual posi-
tion, allowing more space at the top of
the valve and better access by operators.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M D Y N A S E A L
3 7 0 C T T R U N N I O N B A L L V A L V E S
The general purpose trunnion
ball valve for the petroleum and
chemical process industries, its
strong suit is low torque block
and bleed service.
W-K-M DynaSeal
370CT ball valves

satisfy a wide range of ANSI and API 6D
applications. Available in carbon steel
and stainless steel with various trims,
they may be specied in sizes from 4" to
14" and pressure classes of 150 and 300.
nance-free performance, The DynaSeal
370CT is commonly selected for a num-
ber of demanding applications.
Features/Benets
Deep pocketed seats
Aseat pocket encapsulates the three-piece
seat assembly which consists of an outer
metal seat ring with a TFE insert. An O-
ring energizes the seat face against the ball
to ensure ball/seat contact at all pressures.
Positively retained stem
The stem is held positively in place by
means of a steel retention pin which can-
not be removed without disassembling
the valve.
Trunnion ball valves allow easy on-off
operation, even at high pressures, since the
Stem is positively retained,
cannot be removed with
valve in service.
Ball is trunnion-mounted for
low-torque operation.
Pressure-actuated seats provide
positive seal under all conditions.
Seat is set into deep
groove in its steel
retainer, protected
from erosion and
foreign materials.
Adjustable stem packing
(p14)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
SPECIFICATIONS
Sizes
4" - 12" full bore
6" - 14" regular port
Pressure Classes
150 and 300
From -50F to +350F (-46C to +176C)
End Connections
Flanged
(weld, weld-by-ange - Class 300)
Body Styles
Two-piece
Standard Materials
Carbon steel, stainless steel,
NACE MR-01-75
Optional Materials
Special trim available upon request
ball turns on carefully aligned bearings.
The ball is xed in position, but free to
turn. Torque is so low that wrench opera-
tion of valves through 6" bore size is
practical. When power actuation is desired,
much smaller actuators are needed.
Easy to maintain
The valve can be completely disassem-
bled in the eld for replacement of seats
or for a complete overhaul. Seats can be
replaced quickly without special tools.
Actuation-friendly
Avariety of actuator types can be easily
installed including pneumatic, hydraulic,
diaphragm, vane, electro-mechanical and
electro-hydraulic. Cooper Cameron Valves
can provide a total package of valves and
actuators to meet your needs.
Positive double block and bleed
operation
The pressure-actuated seats and bleed
ttings allow double block and bleed
operation. When used for block and
bleed, this feature permits the valve to
take the place of two valves. It also
allows the operator to check up and
downstream sealing by installing
pressure-releasing tool to bleed body
pressure.
All DynaSeal 370CT valves are qualied
under API standard 6FA. The pocketed
seat contributes to its unusually good re
test characteristics. Should the soft seats
be destroyed by re, the metal shoulder
acts as a secondary metal-to-metal seal
until maintenance can be performed.
A
B
C
D
Actuator mounting
bracket for 4"- 8"x 6"
valves (Optional)
Actuator mounting
bracket for 8"-14"x
12" valves (Standard)
E
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
3 7 0 D 4 2 " - 6 " X 4 " T R U N N I O N B A L L VA L V E S

The end-entry ball valve for gas,
oil and product pipelines, its the
choice for gas distribution and
other specialized applications.
DynaSeal 370D4 ball valve offers all the
required features and options demanded
by the gas distribution, gas transmission
and oileld production industries,
including seat sealant injection ttings,
stem sealant injection and low
pressure sealability, and complies with
the requirements of ANSI B16.34, API
6D and API 6FA.
The ends may be specied in anged,
weld or weld-by-ange connections.
Features/Benets
Pressure-actuated seats
This valve uses pressure-actuated seats
with locked-in non-metallic face seals.
To assure tight sealing at low pressures,
special wave springs force the seats
against the ball. At higher pressures, the
upstream seat is forced against the ball by
the pressure working across the differen-
tial between the area of the seat insert and
the seat O-ring. The higher the pressure,
the tighter the seal.
Secondary seat sealant injection
In the event of damage to the valve seat,
Seat face seals are available
in Nylon or Viton
2" square operating
nut is optional.
Body bleed tting for double
block and bleed applications.
Locking device standard
on manual valves.
Integral actuator
mounting ange
Field repairable
2 piece body
(p16)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
3 7 0 D 4 2 " - 6 " X 4 " T R U N N I O N B A L L VA L V E S

sealant can be injected to temporarily seal
the valve until repair can be performed.
(Optional in 2"- 4" class 150/300, stan-
dard in all others.)
Field repairable
The split body design permits complete
repairs to be made in the eld without
special tools.
To ensure safety, all DynaSeal 370D4 ball
valves feature a positively retained stem.
Indicator handle
When the handle is aligned with the pipe,
the valve is open. When the handle is per-
pendicular to the pipe, the valve is closed.
Design standards
ANSI B16.34 - Design Standard. ANSI
B16.5 - Steel Pipe Flanges and Flange
Fittings. API 6D - Specication for
Pipeline Valves. API 6FA- Fire Test
Specication. These DynaSeal 370D4 Ball
Valves meet the following: MSS-SP-6
standard nishes for pipe anges, MSS-
SP-25 standard marking system for valves,
MSS-SP-55 quality standards for steel
castings.
operation
The pressure-actuated seats and bleed t-
tings allow double block and bleed opera-
tion. When used for block and bleed, this
feature permits the valve to take the place
of two valves. It also allows the operator
to check up and downstream sealing by
bleeding off the body pressure.
Automatic body pressure relief
Seats will internally relieve excess
body pressure.
All DynaSeal 370D4 valves are qualied
under API standard 6FA. Fire tested
requirements specify YAF or AAF
for nylon 6 or Viton face seals with
Viton O-rings.
SPECIFICATIONS
Sizes
2"- 4" Full bore
3"- 6" Regular port
Pressure classes
150, 300, 600 and 900
From -50F to +350F (-46 C to +176C)
End Connections
Flanged
Weld end (Class 600)
Body Styles
Two-piece
Standard Materials
Carbon steel
Carbon steel NACE MR-01-75
Optional Materials
Stainless steel body
Low temperature Carbon steel
Special trims available upon request
Other Options
2" square operating nut.
Seat sealant injection (Class 150/300).
Stem injection (4" and smaller).
Stem extensions with lube, packing
and drain extension.
Stem sealant injection is
optional on 2"- 4".
2" square operating
nut is optional.
Integral actuator
mounting ange.
Secondary seat sealant injection ttings are
standard on Class 600 and higher pressure
classes and optional on lower pressure classes.
Field repairable
2 piece body
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
3 7 0 D 4 6 " - 1 4 " T R U N N I O N B A L L VA L V E S
The end-entry ball valve for oil,
gas and product pipelines; its a
popular choice for specialized
pipeline applications.
W-K-M DynaSeal 370D4 ball valves sat-
isfy a wide range of ANSI and API 6D
applications. They may be specied in
sizes from 6" to 14"x12" and pressure
classes of 600 and 900.
nance-free performance and manufactured
in a variety of body and seal materials,
the DynaSeal 370D4 is commonly select-
ed for many specialized applications.
Features/Benets
Bi-directional ow
with locked-in non-metallic face seals. To
assure tight sealing at low pressures, spe-
cial wave springs force the seats against
the ball. At higher pressures, the upstream
seat is forced against the ball by the pres-
sure working across the differential
between the area of the seat insert and the
seat O-ring. The higher the pressure, the
tighter the seal.
Secondary seat seal injection
In the event of damage to the valve seat,
sealant can be injected to temporarily seal
the valve until service can be performed.
Positively retained stem/stem sealant
injection
To ensure safety, all DynaSeal 370D4 ball
valves feature a positively retained stem,
and provisions for injection of stem
sealant.
Seats will internally relieve excess
body pressure.
Ball is held fast by trunnion,
but free to turn easily at any
pressure.
Pressure-actuated seat
provides positive seal
under all conditions.
Seat is set into deep groove in
its steel retainer, protected from
erosion and foreign materials.
valve in service.
Standard adapter ange
for ease of automation.
Secondary seat sealant
injection ttings.
Provisions for stem sealant
injection.
SD-11348
(p18)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
3 7 0 D 4 6 " - 1 4 " T R U N N I O N B A L L VA L V E S
SPECIFICATIONS
Sizes
6" - 12" full bore
Pressure classes
ANSI 600 and 900
From -50F to +350F (-46C to +176C)
End Connections
Body Styles
Two-piece
Standard Materials
NACE MR-01-75
Optional Materials
Special trims available upon request.
A
B
D
C
Excess body
pressure
Seat
injection
tting
Bi-directional ow
operation
bleeding off the body pressure.
Design standards
Specication. The DynaSeal 370D4
meets the following: MSS-SP-6 standard
nishes for pipe anges, MSS-SP-25
standard marking system for valves,
MSS-SP-55 quality standards for steel
castings.
All DynaSeal 370D4 valves are qualied
under API standard 6FA.
Actuation-friendly
installed. Cooper Cameron Valves can
provide a total package of valves, actua-
tors or mounting plates to accommodate
actuation.
See pages 97 and 99 for technical
specications.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
3 7 0 E 4 T R U N N I O N B A L L V A L V E S
The top-entry ball valve for
manifolds or other applications
where removing valves is difcult
or prohibitively expensive.
W-K-M DynaSeal
370E4 is a top entry

design ball valve made to API 6D stan-
dards. This design permits rebuilding
while the valve is installed in the line.
It is ideal for manifolds or other applica-
tions where removing valves is difcult
or prohibitively expensive. The DynaSeal
370E4 is made in API 6D classes 600, 900,
1500, 2500 and sizes from 2" through
8" x 6". Also, available as API 6A, 5000
in sizes 2 1/16" through 7 1/16" x 6".
Features/Benets
Top entry construction
It is possible to replace seats, or all inter-
nals, if ever necessary without removing
the valve from the line. With this valve, it
is practical to fabricate all-welded mani-
folds without concern for possible valve
repair or maintenance.
One-piece body resists line stresses
The DynaSeal 370E4 provides maximum
resistance to distortion when compared to
other designs. It meets or exceeds all
strength requirements and yet is not as
heavy as other similar valves.
Pressure-actuated seats
with locked-in non-metallic face seals. To
assure tight sealing at low pressures, spe-
cial C springs force the seats against the
ball. At higher pressures, the upstream
valve in service.
Ball is held fast by trunnion,
but free to turn easily at
any pressure.
Pressure-actuated seat
provides positive seal
under all conditions.
Seat is set into deep
groove in its steel retainer,
protected from erosion
and foreign materials.
One piece body
resists line stresses.
Top entry design
in line repairable.
(p20)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
seat is forced against the ball by the pres-
sure working across the differential
between the area of the seat insert and the
seat O-ring. The higher the pressure, the
tighter the seal.
Convenient three-way operating head
The three-way head is especially useful
when it is necessary to mount the valve in
tight quarters. Awrench lug is provided
when valve is operated by a conventional
wrench rather than a lever.
Precise open-closed positioning
The valve uses an external stop press t-
ted into the cover plate that mates with a
stop plate on the stem. Both the stop and
stop plate may be removed when
installing actuators.
Seats will internally relieve excess body
pressure.
operation
installing pressure-releasing tool to bleed
body pressure.
Emergency seat renewal
In the event of damage to the face seal,
sealant can be injected into the valve to
provide a temporary seal. In small valves
it is injected through the drain tting. In
valves, larger than 4" bores, injection t-
tings are provided at each seat location.
DynaSeal 370E4 ball valves are qualied
under API standard 6FA.
Design standards
Specication.
A
C
D
C springs for
low pressure
sealing
Pressure
activated
seat
Stop
plate
Stop
pin
B
Ball removal allows
easy access to seat.
SPECIFICATIONS
Sizes/Classes
API 6D Class 600, 900, 1500 -
2" - 6" Full bore
3" - 8" Regular port
Class 2500 -
2" - 4" full bore
6" regular port
API 6A - 5000 psi in sizes 2-1/16"
thru 7-1/16"x 6"
From -50F to +350F
(-46C to +176C)
End Connections
Body Styles
One-piece
Standard Materials
NACE MR-01-75
Optional Materials
Special trims available upon request.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
D Y N A S E A L
3 1 0 C 2 - P I E C E F L O A T I N G B A L L V A L V E S
A premium quality oating ball
valve that has proven itself in a
wide variety of oileld, chemical-
petrochemical and hydrocarbon
processing applications.
W-K-M DynaSeal
310C 2-piece oating

ball valves satisfy a wide range of appli-
cations. Available in a variety of standard
and optional materials, they may be spec-
ied in sizes from 4" to 14" and pressure
ratings of 150 and 300.
nance -free performance, the DynaSeal
310C 2-piece is commonly selected for a
variety of applications in virtually any
industry.
Chemical and petrochemical plants
The list of chemical and petrochemical
applications for DynaSeal ball valves is
limitless. They are serving in many plas-
tic plants handling such slurries as 40%
vinyl chloride, in high pressure catalyst
lines and in processes handling dry
ladings such as polyethylene and poly-
styrene powders. There are hundreds
of applications in such plants where
DynaSeals are providing efcient
services.
Rening
DynaSeal is the workhorse of the rening
industry. The many metal seats, seals, and
available trims offer the versatility need-
ed to handle the wide variety of products
used in the rening process.
High temperature service
Special high temperature trims are avail-
able for DynaSeal 310 ball valves which
provide for service to 600F (316C).
This trim is excellent for steam service,
hot oil, heat transfer uids, boiler feed-
water and similar applications.
Low temperature service
Standard trims accommodate temperatures
to -20F (-29C). For temperatures to
-50F (-46C); please consult the factory.
Handle can be installed in correct position only, in
alignment with ball port. Handle aligned with pipe
shows valve is open. Handle perpendicular shows
valve is closed. (4" and 6" bore only)
valve in service.
Packing can be
adjusted or replaced
without removing
valve from line.
Deep pocket design protects seat from
the ow to extend service life.
Stop plate provides ball alignment
and visual indication of open or closed
position. (4" and 6" bore only)
Ground spring for protection
in volatile uid applications
(p22)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
the ball or the ow medium. The result is
an extremely long service life.
Adjustable, replaceable packing
The in-line valve stem packing consists
of PTFE-impregnated graphite with an
impervious metal barrier, and a secondary
tapered metal back-up. The packing is
eld adjustable and never requires lubri-
cation. The packing and the stainless steel
cap can be replaced without removing the
valve from line.
Fugitive emissions
DynaSeal 310 ball valves can be supplied
and certied to meet the requirements of
fugitive emissions as regulated by The
1990 Amendment to the Clean Air Act.
The stem is positively retained with a
retainer pin. It cannot be removed with
the valve in service.
Indicator handle
The design of the handle permits installa-
tion on the stem in the correct position
only in alignment with the ball port.
Floating ball design delivers
tight seal
The ground and polished ball is free to
oat, and mates perfectly with the conical
seats for a positive, leakproof seal. Self-
cleaning and self-adjusting, the ball is
also pressure-activated the higher the
line pressure, the tighter the seal.
SPECIFICATIONS
Sizes
4" - 12" full bore; 6" - 14" regular port
Working Pressures
150 and 300 pressure classes
From -50F to +600F (-46C to +316C).
End Connections
Class 150, 300 anged and 300 butt weld
Standard Materials
Body: Stainless steel and carbon steel
Ball/Stem: Stainless steel, carbon steel
and monel
Seat/seal trims: TFE, lled TFE, HPT-2,
316 stainless steel with chromium oxide,
316 stainless steel with F6 hard face
A
B
Maintenance-free performance
Under most conditions, the DynaSeal 310
oating ball valve will provide years of
trouble-free service with no maintenance
required. In some severe applications,
such as handling extremely abrasive slur-
ries at high temperatures, it may be nec-
essary to replace the seats occasionally.
Seat and seal kits are available and
replacement can be done easily with
ordinary tools.
Fire-tested for safety
All DynaSeal 310C valves are qualied
under API standard 607. The pocketed
seat and locked-in stem design con-
tributes to its excellent re tested
characteristics. Should the soft seats be
destroyed by re, the ball oats down-
stream, providing a tight metal-to-metal
seal against the lip of the seat pocket. If
the tailpiece seals are destroyed, the
metal-to-metal tailpiece body connection
retards external leakage.
Actuation-friendly
installed, including pneumatic, hydraulic,
electro-hydraulic. Cooper Cameron
Valves can provide a total package of
valves, actuators, and support services
to meet your needs.
Features/Benets
Deep recessed seats
The seat is recessed into a deep machined
pocket, which serves to surround and pro-
tect the seat on all sides. This design
eliminates cold ow into the valve conduit
where it can be damaged by the action of
Deep recessed seats
Actuator mounting
bracket for 4"- 8"x 6"
valves (Optional)
Actuator mounting
bracket for 8"-14"x
12" valves (Optional)
W-K-M DynaSeal 310C Ball Valve
with Pneumatic Actuator
C
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
A premium quality oating ball
valve that has proven itself in a
wide variety of oileld, chemical-
petrochemical and hydrocarbon
processing applications.
W-K-M DynaSeal
310C 3-piece oating

ball valves satisfy a wide range of appli-
cations. Available in a variety of standard
and optional materials, they may be spec-
ied in sizes from 1/4" to 4" and working
pressures up to 5,000 psi.
nance-free performance, The DynaSeal
310C is preferred for use in critical
applications.
Slurries and Abrasive Ladings
Seat trim 92H has been developed to han-
dle highly abrasive slurries such as lime
mud, catalysts and coal slurries. Using
316 stainless steel as a base, the ball and
seats are coated with an abrasion-resistant
skin of chromium oxide and then are
lapped together to form a matched metal-
to-metal sealing set. The coating has a
hardness of Vickers 1200-1400, which is
approximately equivalent to Rockwell C
72-74. Valves trimmed for this service
can be rated up to 600 F.
Sour Oil and Gas Service
DynaSeal ball valves have served for
years in gathering lines, manifolds, and
eld processing units in sour oil and gas
elds. They can be trimmed to conform
with NACE MR-01-75.
Features/Benets
Deep seats
pocket, which serves to surround and
protect the seat on all sides. This design
eliminates cold ow into the valve
conduit where it can be damaged by the
action of the ball or the ow medium. The
result is an extremely long service life.
Handle can be installed in
correct position only, in
alignment with ball port.
Flanged, threaded or
socket weld ends.
Stem is positively
retained, cannot
be removed with
valve in service.
Packing adjustment
screws and bonnet cap
retain compression ring
and packing.
Seat is in deep protective
pocket which prevents
cold-ow of seat into line.
Floating ball is self-
adjusting, self-cleaning.
Packing can be
replaced without
removing valve
from line.
Open or closed position
locking plate allows use of
popular padlock designs.
DynaSeal 310C 3-piece Threaded
(p24)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Adjustable, replaceable packing
The in-line valve stem packing consists
of PTFE-impregnated graphite with an
impervious metal barrier, and a secondary
tapered metal back-up. The packing is
eld adjustable and never requires lubri-
cation. The packing and the stainless steel
cap can be replaced without removing the
valve from the line.
The stem is back-seated and positively
retained with a shoulder. It cannot be
removed with the valve in service.
Teon
seals
ATeon body joint gasket protects the
tailpiece threads from corrosion by the
ow medium.
tight seal
Under most conditions, the DynaSeal
required. However, seat and seal kits are
available for replacement if necessary.
Fire-tested for safety
All DynaSeal 310C valves are qualied
tributes to its unusually good re tested
seal against the lip of the seat pocket. If
the tailpiece seals are destroyed, the
Indicator handle
Actuation-friendly
diaphragm, vane, electro-mechanical
and electro-hydraulic. Cooper Cameron
valves, actuators and support services to
meet your needs.
SPECIFICATIONS
Sizes
1/4" - 3" full bore; 1/2" - 4" regular port
Working Pressures
To 5,000 psi in small sizes, 740 psi in large
sizes; trim 23 extends pressure range to
5,000 psi in 1/2" R and 3,000 psi in 1/2" F
to 2" R
From -50F to +600F (-46C to +316C).
End Connections
Class 150, 300, 600 lb. anged, threaded
and socket weld, Class 300 butt weld end
Body Styles
3 Piece
Standard Materials
Body: Stainless steel and carbon steel
Ball/Stem: Stainless steel, carbon steel
and monel
Seat/seal trims: TFE, lled TFE,
Delrin/Hydrin, HPT-2, Celcon, 316
stainless steel with chromium oxide,
and uoroelastomer
Optional Materials
Wide range of trim materials.
Trim 23 extends pressure range
to 5000 psi in 1/2" R and 3000 psi in
1/2" F to 2" R
B
D
A
C
E
DynaSeal 310C 3-piece Flanged
Metal to metal seals
Seals tight here
Pressure here
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
3 1 0 D F L O A T I N G B A L L V A L V E S
Designed for critical applications
where fugitive emissions cannot
be tolerated.
The W-K-M 310D ball valve is designed
to meet tougher industry requirements
while maintaining the key features of the
proven W-K-M oating ball valve design.
It is offered in sizes from 1/2" to 4"x 3",
class 150 and 300. The 1-1/2", 2" and 3"
full port valves are a 2 piece design. All
other sizes are the unibody design.
Engineered for heavy duty, trouble free
performance, the 310D ball valve is com-
monly selected for a number of applica-
tions in the following industries:
Pulp and Paper
Chemical and Petrochemical
Rening
Oil and Gas Production
Terminals, Fuel Depots, and Storage
Facilities
Features/Benets
Adjustable replacement packing
Stem packing can be adjusted while the
valve is in service.
Static grounding/body bleed port
The 310D ball valve can be supplied with
a static grounding device. Abody bleed
port option is also available.
Locking capability is standard
To ensure safety, the valve can be locked
in the open or closed position.
retained to prevent stem blowout while
the valve is in service.
310D fugitive emissions
The single piece unibody, stem design
and extended stufng box make the 310D
ball valve excellent for services where
emissions are a concern. The deep pack-
ing area is packed with a multiple chevron
or jam packing to further minimize the
possibility of emissions. ATeon
gasket
Positively retained stem.
Deep pocket
protected seat.
Lockable handle.
External adjustable packing.
Unibody construction.
Deep stufng box.
Removable
seat retainer.
SD-11347-96
(p26)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
D Y N A S E A L
p27) F E A T U R E S A N D B E N E F I T S
310D 2-Piece
Ball Valve
D
B
ensures a tight seal between the body
and tailpiece in the two piece valve
design (1-1/2", 2" and 3" full port
valves). These valves can be certied
to meet the requirements of fugitive
emissions as regulated by The 1990
Amendment to the Clean Air Act.
Teon seals
In the unibody design, a Teon body joint
gasket protects the body insert threads
from corrosion by the ow medium. In
the two piece valve design, a Teon gas-
ket ensures a tight seal between the body
and tailpiece. There are no O-rings used
in the WKM 310D design.
Deep pocketed seats
pocket, which serves to surround and
tight seal
Fire-tested metal-to-metal seal
All DynaSeal 310D valves are qualied
tributes to its unusually good re-tested
seal against the lip of the seat pocket.
If the tailpiece seals are destroyed, the
Indicator handle
The design of the handle permits installa-
tion on the stem in the correct position
onlyin alignment with the ball port.
Under most conditions, the DynaSeal
310D oating ball valve will provide
years of trouble-free service with no
maintenance required. In some severe
applications, such as handling extremely
abrasive slurries at high temperatures,
it may be necessary to replace the seats
occasionally. Seat and seal kits are
available and replacement can be done
easily with ordinary tools.
Actuation-friendly
electro-hydraulic. Cooper Cameron Valves
can provide a total package of valves,
actuators, and support services to meet
your needs.
SPECIFICATIONS
Sizes
1/2" to 4"x 3"
Pressure Class
Class 150 and 300
Standard End Connection
Flanged, Raised Face
Standard Materials
Body: Carbon Steel, CF8M SS
Stem/ball: Carbon Steel, 316 SS
Seat: Reinforced TFE
Optional Materials
Bodies, stems, and balls can be offered
in different alloys - consult factory.
Seat materials: High Temp TFE, Viton,
Stellite, Chromium Oxide Coated
Industry Standards Compliance
ANSI B16.5, B16.104; MSS-SP-6, 25, 55,
72; API 607 and others.
A
E
Conical Seat
Metal
Shoulder
TEFLON
gasket
(1-
1
/2", 2" and 3" Full Port)
See pages 124 and 130 for technical specications.
Pressure here
C
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
2 1 0 A F L O A T I N G B A L L V A L V E S
The W-K-M oating ball valve
design expands further into
the oileld market with the
DynaSeal 210A ball valve. This
rugged, but economical ductile
iron ball valve is the valve of
choice for threaded end oileld
applications where carbon
steel body material is not a
requirement.
The W-K-M 210Aball valve is a two
piece design with ductile iron body and
tailpiece. Even though this valve is eco-
nomical, it includes many of the premium
design features found in the W-K-M car-
bon steel 310C and 310D ball valves. It
is available in 1" to 4"x3" sizes. Working
pressures offered are 1,000, 1,500 and
2,000 psi. Maximum pressure ratings are
2000 psi, 1" to 3"x2" valves, and 1500
psi for the 3"x3" and 4"x3" valves. This
valve is primarily used in the Oileld
market, typically chosen for the following
applications:
Production wing valves on low pres-
sure gas wells
Production ow lines
Production gathering systems for water,
oil, and gas
Gas blow down service
Tank batteries for storage or production
Frac water tanks
Features/Benets
Locking capability is standard
To ensure safety, the valve can be locked
in the open or closed position.
retained. It is designed to prevent stem
blowout while the valve is in service.
Back seated positively retained
stem cannot be removed with
valve in service.
Recessed deep
pocket seat is
protected from
ow.
Open or closed position locking
handle accommodates popular
padlock designs.
Double O-ring stem seal.
Stem gasket reduces torque and
provides a secondary stem seal.
Handle provides positive indication
of open/closed position.
(p28)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
(25) F E A T U R E S A N D B E N E F I T S
Color coded working pressures
for safety
The lock plates are color coded so
pressure ratings are quickly identied
(1,000 psi - green, 1,500 psi - blue &
2,000 psi -red) .
Superior stem journal design
prevents stem seizure
The stem is designed with two internal
O-ring grooves located on either side of
a shallow grease groove. The top O-ring
is a weather seal while the bottom one
seals the stem bore against the line media
from the stem bore. The stem gasket pro-
vides a backup seal.
The shallow groove between the
O-rings provides three benets:
prevents stem seizure
reduces torque
provides a space for permanent lubricat-
ing grease applied at the factory during
assembly.
This stem design provides long,
trouble free service without the need for
additional grease, but for those customers
wanting additional assurance, a grease
tting is offered as an option.
Deep pocketed seats
pocket which serves to surround and
extremely long service life.
Teon body seal
ATeon body seal is positioned between
the line bore and tail piece threads isolating
the threads from the line media.
Seal pin device provided as standard
on 1000 psi, 2", 3" and 4" reduced
port valves (210L).
Asecondary seal pin device for applying
tamper detection seals is provided on
these three 1,000 psi valves. These valves
(referred to as 210L) are a popular choice
for production tank batteries where tamper
detection seals are often required.
Fire tested seat design
The W-K-M DynaSeal 210Aball valves
are qualied under API Standard 607.
The pocketed seat, locked-in stem, and
body/tailpiece designs give this valve
unusually good re-safe characteristics.
SPECIFICATIONS
Sizes
1" to 4"x 3"
Pressures
1000, 1,500 and 2,000 psi
Standard End Connection
API line pipe threads
Standard Materials
Body: Ductile Iron
Stem & ball: Carbon Steel
Seat/seals: Delrin/Buna-N
Optional Materials
Stem & ball: Stainless Steel
Seat/seals: Teon / Viton
(Note: 210A valves trimmed with SS
stem and ball, with Teon seat and
Viton seals meet NACE MR-01-75
requirements for H
2
S service)
ANSI B16.5 & B16.34; MSS-SP-6, 25, 55,
72 & 61; API 607.
D
E
A
210L with Seal Pin.
B
C
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
2 1 0 F F L O A T I N G B A L L V A L V E S
The economical oating ball
valve with the deep-pocketed
seats and O ring stem seals has
proven its toughness in multiple
applications.
W-K-M DynaSeal
210F oating ball

valves satisfy a wide range of applications.
They are available in carbon steel, and
may be specied in sizes from 1" to 4" in
class 150, 300 and 600 anged ends. They
are also available in 2" regular and full
bore sizes with threaded ends and work-
ing pressures of 2,500 or 3,000 psi.
nance-free performance, the DynaSeal
210F is commonly selected for a number
of applications in the oil and gas gather-
ing and eld processing applications
including NACE MR-01-75.
Oil and gas production
Many oil and gas processing units are in
remote locations where reliability is the
rst consideration. Thats why DynaSeal
valves are the rst choice of production
engineers in many oil companies. In addi-
tion, DynaSeals meet the extra heavy-
duty standards of the petroleum industry.
Sour oil and gas service
DynaSeal ball valves have served for
years in gathering lines, manifolds, and
eld processing units in sour oil and gas
elds. They can be trimmed to conform
with NACE MR-01-75.
Features/Benets
Deep seats
pocket, which serves to surround and pro-
tect the seat on all sides. This design
Teon
seals
ATeon body joint gasket protects the
tailpiece threads from corrosion by the
ow media.
Back seated positively retained
stem cannot be removed with
valve in service.
Recessed deep
pocket seat is
protected from
ow.
Open or closed position
locking handle accommodates
popular padlock designs.
O-ring stem seal.
Stem gasket reduces torque and
provides a secondary stem seal.
2" and 3" Bore Size
(p30)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
D Y N A S E A L
Floating ball design delivers tight seal
seats for a positive, leak proof seal. Self-
also pressure- activated the higher the
Low torque operation
Stem O rings and gasket optimize stem
sealing and reduce torque values to the
minimum.
Fire tested
All DynaSeal 210F valves are qualied
seat design contributes to its unusually
good re tested characteristics. Should
the soft seats be destroyed by re, the
ball oats downstream, providing a tight
metal-to-metal seal against the lip of the
seat pocket. If the tailpiece seals are
destroyed, the metal-to-metal tailpiece
body connection retards external leakage.
retained with a shoulder. It cannot be
removed with the valve in service.
Indicator handle
Under most conditions, the DynaSeal 210f
required. However, seat and seal kits are
available for replacement if necessary.
Actuation-friendly
electro-hydraulic. Cooper Cameron
valves and actuators to meet your needs.
SPECIFICATIONS
Sizes
1" - 3" full bore
Working Pressures
150, 300, 600
From -20 F to +350F (-29C to +177C)
End Connections
Flanged
Threaded - 2" regular and full bore
Body Styles
3-piece
Standard Materials
Carbon steel
Optional Materials
Available with NACE and stainless
steel trims.
C
A
B
2"x 1
1
/2" size
O-ring stem seal.
Stem gasket reduces
torque and provides a
secondary stem seal.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
T HORNHI L L CRAVE R A D J U S T A B L E C H O K E S
A long-time standard for safety
and reliability in the oileld,
Thornhill Craver UNIBOLT Stem
and Seat Adjustable Chokes are
designed for high performance in
critical applications such as gas
wells with high pressure drops,
abrasive ow and corrosive
conditions.
The Thornhill Craver UNIBOLT Choke
design is eld proven in a wide range of
applications. Available with alloy steel
or 12% chrome stainless steel body, it is
provided with a ring-groove or taper-type
seal depending on size and pressure.
Adjustable choke styles are Standard,
Long Nose Heater, Force Balanced and
Steam.
nance-free performance, The Thornhill
Craver UNIBOLT Choke is commonly
including:
Production manifolds
Wellheads
Heaters
Critical Services
Well testing
Well clean-up
The UNIBOLT coupling between the
body and yoke is a unique design feature
that ensures superior reliability and safety
over other methods. The connection is
made by means of the UNIBOLT inter-
locking shelf design rather than by
conventional threads or anges.
Features/Benets
Coupling vs. threads for safety
body and yoke provides a higher degree
of safety than conventional threads or
flanges due to the greater amount of metal
in shear. There are no threaded or anged
connections between component parts,
and the adjustable choke may be disman-
tled quickly for change of stem seats.
Stem packing seals in line uid,
isolates stem threads from lading.
No go stem ring for safety.
UNIBOLT coupling for safety
and easier eld maintenance.
PLUGLOK allows pressure
release, ensures safety.
Reliable metal seal.
(Mechanical, ring
groove type shown)
Variety of end connections available.
(Flanged inlet by UNIBOLT outlet shown)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
compounded with Teon requires no lubri-
cation. The stem seat and gasket can easily
be removed for inspection and replacement
if necessary.
For added safety, the stem can only be
removed through the bottom of the yoke
hub assembly.
Stem ring for safety
Ano-go ring is an integral part of the
tip end to prevent separation of the stem
and the bonnet assembly in the event that
thread deterioration causes the stem to
release in an upward motion.
Variety of end connections available
Threaded; UNIBOLT Line Pipe or butt
weld; anged API or ANSI connections
are available. Chokes may be ordered with
combined end connections, and other
manufacturers end connections are also
available. Typically, other than threaded,
the most economical is a choke body with
UNIBOLT connections.
Two seal designs utilized
The ring-groove seal is a mechanical-type
seal requiring tightening of the unit to
effect a seal. The taper-type seal is self-
energizing under pressure in both directions
and secures between the yoke and body.
On both seal types, the yoke member pilot
ts snugly into the body, centers the stem
in the seal and minimizes vibration.
PLUGLOK Bleeder plug for safety
and pressure release
Every UNIBOLT Choke comes with the
PLUGLOK safety system. The bleeder
plug functions to indicate unexpected pres-
sure as well as a means to relieve trapped
Simple conversion to positive choke
Ablanking plug may be substituted for
the yoke bonnet assembly to effect simple
eld conversion to a positive choke.
Easily automated
The UNIBOLT Adjustable Choke is
easily automated with pneumatic actua-
tion. Yoke adapter assemblies for Fisher
actuators are a standard design.
Easy maintenance
Only common tools are required. ACME
Power Threads on the reduced diameter
of the stem facilitate insertion through the
packing assembly. Chevron-type packing,
body pressure. The bleeder plug insures
safety because it must be removed before
the nut member can be unlocked to open
the choke for maintenance.
Styles
Standard Adjustable Choke
Stem and Seat Adjustable Chokes are
designed for high performance in critical
applications such as gas wells with high
pressure drops, abrasive ow and corro-
sive conditions.
Long Nose Heater Adjustable
Choke
When installed on an indirect heater,
with the outlet end of the elongated
choke body fastened directly to the tube
bundle, the choke seat area is completely
surrounded by the hot water which is
primarily used to heat the tubes. The heat
generated in this manner has a benecial
effect in minimizing the severe refrigerat-
ing action resulting from metering high
pressure natural gas.
Force Balanced Adjustable Choke
Designed to handle high-pressure, high-
volume applications, it employs an innov-
ative force-balanced arrangement which
allows for very low operating torque.
Adjustable Steam Choke
Designed for use in steam injection and
other high-temperature applications up
to 800F.
Material Options
Body: alloy steel or 12% chrome
stainless steel
Seats & stems: alloy steel, 12% chrome
stainless steel and tungsten carbide
A
B
C
D
SPECIFICATIONS
Sizes
2" chokes: seat ID 1/2" to 1"
3" chokes: seat ID 1" to 2"
Pressure Ratings
2,000 psi to 20,000 psi
End Connections
Threaded, UNIBOLT Line Pipe, UNIBOLT
butt weld, anged API or ANSI
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
T HORNHI L L CRAVE R P O S I T I V E C H O K E S
A long-time standard for safety
and reliability in the oileld,
Thornhill Craver UNIBOLT
Positive Chokes are designed
for maximum performance
under critical conditions.
Thornhill Craver UNIBOLT Positive
Chokes are available for pressures up to
20,000 psi with either alloy steel or 12%
chrome stainless steel body. They are
provided with a ring-groove or taper type
seal depending on size and pressure. Bean
sizes can be specied from 1/64" to 2".
nance-free performance, the Thornhill
Craver UNIBOLT Choke is commonly
including:
Wellheads
Well testing
Manifolds
Process facilities
The UNIBOLT coupling between
the blanking plug and the body is a
unique design feature that ensures
superior reliability and safety over other
methods. The connection is made by
means of the UNIBOLT interlocking
shelf design rather than by conventional
threads or anges.
Features/Benets
Coupling vs. threads for safety
body and blanking plug provides a higher
degree of safety than conventional
threads or anges due to the greater
amount of metal in shear. There are no
threaded or anged connections between
component parts, and the choke may be
dismantled quickly for change of beans.
Simple conversion to adjustable choke
The blanking plug may be replaced with
a yoke bonnet assembly to effect simple
eld conversion to an adjustable choke.
Easy maintenance
Only common tools are required and there
are no multiple bolts to loosen and remove.
Parts are interchangeable and the seal ring
is reusable. Installation, parts replacement,
and other eld work are simple.
Variety of end connections available
Threaded; UNIBOLT line pipe and butt
Flexible ow bean offering:
optional materials available,
optional UNIBOLT X bean
offered between 1/64" and
1/4" orice size.
Bleeder plug allows
pressure release,
ensures safety.
UNIBOLT coupling for safety
and quick dismantling; easy
eld maintenance.
Reliable metal seal.
(taper type seal shown)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
T HORNHI L L CRAVE R
P O S I T I V E C H O K E S
A
SPECIFICATIONS
Sizes
2" chokes: bean ID 1/64" to 1"
3" chokes: bean ID 1/64" to 2"
Pressure Ratings
2,000 psi to 20,000 psi
End Connections
Threaded, UNIBOLT line pipe, UNIBOLT
butt weld, anged API or ANSI
Material Options
Body: alloy steel or 12% chrome
stainless steel
Flow beans: alloy steel, 12% chrome
stainless steel. Tungsten carbide and
ceramic inserts available
weld; anged API or ANSI connections
are available. Chokes may be ordered
with combined end connections, and
other manufacturers end connections
are also available. Typically, other than
threaded, the most economical method is
a choke body with UNIBOLT connections.
Flexible ow bean offering
Beans are available in alloy steel or
12% chrome stainless steel. Beans with
ceramic or tungsten carbide inserts are
also available. UNIBOLT X beans are
offered in orice sizes less than 14/64"
for more precise ow control in 10%
increments (5% increments available
between orice sizes 6/64" and 14/64").
Bleeder plug for safety and
pressure release
Every UNIBOLT Choke comes with the
PLUGLOK safety system. The bleeder
the bolt force approximately 6-1/2
times as it is transmitted to the seal
ring. This force is further multiplied
3.2 times by the 18 included angle
in the ring and groove seals. Since
the helical angle is self-locking, the
bolt is under no stress after the
initial tightening.
Seal ring squeezes tightly between
plain hub and lug hub for a strong
seal. Plain hub ts over pipe end to
facilitate joining with another.
UNI BOLT STEEL COUPL I NGS
SPECIFICATIONS
See page 142 for technical spec.
Sizes
1" to 6"
Pressure Ratings
Up to 15,000 lbs CWP
End Connections
Threaded or butt weld -
3,000, 5,000 lbs. CWP
Butt weld only -
10,000, 15,000 lbs. CWP
Standard Materials
All steel
Optional Materials
Corrosion-resistant
materials available.
Maximizing leverage for strong
connections, Thornhill Craver
UNIBOLT Couplings are the
high-pressure, compact and
lightweight alternative to API
or ANSI anges for piping
systems.
The UNIBOLT coupling ensures
superior reliability and safety over
other methods. The connection is
made by means of the UNIBOLT
interlocking shelf design rather
than by conventional threads or
anges and provides a higher degree
of safety than conventional threads
or anges due to the greater amount of
metal in shear.
Supporting angle between nut mem-
ber and plain hub equalizes pressure
around the seal ring.
Nut member slips over lug hub,
shelves engage when rotated.
Helical shelves in nut member wedge
against external shelves on the lug
hub, exerting tremendous pressure
on the seal ring.
Tee head bolt - when tightened, the
helix angle of the shelves multiplies
plug functions to indicate unexpected
pressure as well as a means to relieve
trapped body pressure. The bleeder plug
insures safety because it must be removed
before the nut member can be unlocked
to open the choke for maintenance.
Nut
Member
Plain
Hub
Seal
Ring
Lug
Hub
Bolt
SD-10894
1
3
4
2
5
1
3
4
2
5
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
F OS T E R D - S E A L G A T E V A L V E S
The critical situation gate valve
with the dual seal, its durable,
simple, accessible and absolutely
bubble-tight.
Foster D-Seal valves satisfy a wide range
of ANSI and API 6D applications. Available
in carbon or stainless steel, they may be
specied in sizes from 2" to 40" and
pressure classes up to 1500.
nance-free performance, The Foster
D-Seal is commonly selected for a num-
ber of applications, in the following
industries:
Pipelines
Meters
Geothermal
Industrial
The Foster D-Seal valves smooth,
continuous bore minimizes turbulence.
In full bore valves, pressure drop is no
more than through an equal length of the
same size pipe. Seat faces are outside
the ow stream and thus protected from
contact with the lading, whether the valve
is open or closed.
Primary seat.
Stem sealant injection tting.
(Emergency use only)
Block and bleed
test tting.
Motor/BGO
mounting ange
Rising stem.
D-Seal seat assembly is available
with optional metal-to-metal
primary seat.
Body drain tting.
Slab gate.
Full-bore through-conduit
design eliminates turbulence.
Directional self-energized
stem seals.
Stem backseat.
(In fully open position)
Secondary seat.
One-piece cast body resists
pipeline bending moments.
C1326
(p38)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
F OS T E R D - S E A L G A T E V A L V E S
Features/Benets
Redundant seals
Multiple backup seals are used in every
critical area: two independent seats on
each side of gate, three seals in the stem
sealing area, which includes back seat
capability in the fully open position.
Through-conduit design
The full round bore makes it possible
to run pigs, scrapers or hot tap cutters
without damaging the valve, lodging the
scraper, or jamming it with metal cuttings.
Two functional valves in one
D-seal (dual seat) more than doubles the
usable life expectancy compared to a
conventional valve.
Totally bidirectional
Seals in either direction, which in some
cases can eliminate valves used in tan-
dem.
Easy in-line repairs
Replacement of gates, seats, secondary
seats, and stem packing can be easily
accomplished in-line without the need for
special seating tools. The simple, accessi-
ble design allows repair work to be han-
dled through your in-house maintenance
program.
Simple operation and low torque
Allows use of a smaller, more economical
actuator.
SPECIFICATIONS
Sizes
2" - 40"
Pressure Classes
150, 300, 400, 600, 900 , 1500
Standard service: -20F to +250F
(-29C to + 121C)
MTBE service: -20F to +400F
(-29C to + 204C)
Anhydrous ammonia service:
-20F to +250F (-29C to + 121C)
Geothermal service:
-20F to +550F (-29C to + 232C)
End Connections
Flanged, weld end, and ange x weld
Body Styles
Unibody
Optional Materials
Trims available for sour gas, low
temperatures to -50F, waterood
and other special applications.
Gate
Primary Seat
Secondary Seat
Gate Bore
Valve Body
Belleville Spring
Valve Body Cavity
Direction of Flow
Valve Conduit
C1009
Gate
Gate Bore
Valve Body
Valve Body Cavity
Valve Conduit
Gate Bore
Valve Body
Lower
Valve Conduit Pressure
Higher
Valve Body Cavity Pressure
C1011
One-Piece
Stem
Directional
Self-Energized
Seals
Lantern Ring
Injection Port
Backseat Valve Body Cavity
Gate
Stem
C1012
A
B
C
Dual seal operation
The primary seat seals on both the
upstream and downstream sides via an
imbalance of pressure which pushes the
seat toward the gate to create a bubble
tight seal.
The secondary seat activates if the
face of the primary seat becomes damaged.
As pressure leaks across the damaged
primary seat face, the secondary seat is
energized by line pressure acting on the
back of the secondary seat. The seat is
moved toward the gate via an imbalance
of pressure creating a bubble tight seal.
Internally self-venting
When the differential pressure between
the body cavity and the line exceeds the
preset strength of the belleville spring,
pressure is automatically relieved to the
upstream conduit without venting conta-
minants to the atmosphere.
Stem backseat and seals resist leaks
The packing set is comprised of two
self-energized seals which face the body
cavity pressure. When exposed to pres-
sure, these seals are further energized. A
lantern ring separates the two seals and
allows for injection of sealant if a leak
occurs. When fully open, the entire stem
packing area is isolated from body cavity
pressure by a metal to metal backseat,
further maximizing the life of the seals.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M P O W - R - S E A L
G A T E V A L V E S
One of the most trusted of all
premium gate valves, its famous
expanding gate forms a super
tight seal.
W-K-M Pow-R-Seal valves satisfy a wide
range of ANSI and API 6D applications.
Available in carbon or stainless steel, they
may be specied in sizes from 6" to 36"
and pressure classes up to 2500.
nance-free performance, The W-K-M
Pow-R-Seal is commonly selected for a
number of applications, including:
Product and raw material storage
Manifolds
Processing and steam
Steam injection wellheads
The Pow-R-Seal valves smooth,
continuous bore minimizes turbulence.
In full bore valves, pressure drop is no
more than through an equal length of the
same size pipe. Seat faces are outside the
ow stream and thus protected from con-
tact with the lading, whether the valve is
open or closed.
Leverlock
gate centralizer
contracts gate-segment
assembly for travel and
expands it for seating.
Full-bore through-conduit
design eliminates turbulence.
Stem seal is now self-energized
and does not require injectable
packing in new models.
One-piece cast body resists
pipeline bending moments
Gate
Segment
Rising stem
SD24012
(p40)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
P O W - R - S E A L
G A T E V A L V E S
Features/Benets
Expanding gates for powerful seal
During travel, the gate and segment
assembly is collapsed and travels freely.
In the closed position, the segment is
forced by a stop to wedge against the
gate, pushing both out against the seats.
In the open position, the gate and
segments again are forced to wedge
against each other, expanding to form a
seal against the seats and isolate ow and
any contaminants from the valve body.
Mechanical seating
Seating force is mechanical, normally
unaffected by line pressure uctuations or
vibration, for an absolute mechanical
seal, both upstream and downstream.
Through-conduit design
The full round bore makes it possible to
run pigs, scrapers or hot tap cutters with-
out damaging the valve, lodging the
scraper, or jamming it with metal cuttings
Double-sealing replaceable seats
In addition to a metal-to-metal seal, a
TFE-to-metal sealboth upstream and
downstreamis provided by TFE inserts
in valves for operating temperatures of
-20F to +250F (-29C to +121C). The
seats can be removed and replaced while
the valve is in the line.
Block and bleed capability
In closed position, the valve forms a
tight mechanical seal against both seats
simultaneously, which allows the body
cavity to be bled.
Pow-R-Seal Valves can be supplied to
API 6FA. Fire test programs are usually
ongoing. If industry standards change or
customer requirements are different from
above, call your Cooper Cameron Valves
representative.
Emergency sealant injection
In the event of damage to sealing parts,
sealant can be injected to effect a seal
until the valve can be repaired.
In-line overhaul
Gates, seats and other internal parts can
be removed and replaced by a trained
serviceman without excessive shutdown
time.
SPECIFICATIONS
Sizes
6" - 36"
Pressure Classes
300, 600, 900 , 1500, 2500
From -20F to +250F (-29C to +121C)
for standard
From -20F to +1000F (-29C to +538C)
with external packing gland
From -20F to +550F (-29C to +288C)
with internal packing gland
A
B
C
End Connections
Flanged, weld end, and anged x weld
Body Styles
Unibody
Optional Materials
Specic trims for corrosion resistance
and low and high temperatures
available.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
(p42)
CAME RON S A F - T - G A R D
A C T U A T O R S
SPECIFICATIONS (MA12 Series)
Sizing for
1-13/16" through 12"
API Classication
6A, 14D, 6D
Trim
Standard - AA
PSL* (API requires that only
retained uid actuators must
have a PSL rating)
1,2,3
Class
Standard - 1,2
Maximum Operating Pressure
170 psi
Relief device setting
170 psi (12 Bars) at 130F (54C)
Test Pressure
255 psi (18 Bars)
Spring preload at full closed
position
850 lbs force
Weight
75 lbs (34kg)
(T) = 0F to +180F (-18C to + 66C)
Volume Displacement
397 in
3
(6506 cm
3
)
The ideal actuators for Foster
D-Seal gate valves, Saf-T-Gard
Pneumatic Diaphragm, Pneumatic
Piston and Hydraulic actuators
combine eld-proven features
with innovative technology.
The Saf-T-Gard Pneumatic Diaphragm
MA12 Series actuator is designed for
trouble-free operation, avoiding most of
the problems such as galling, misalign-
ment, distortion and O-ring failures
commonly associated with piston-type
actuators.
nance-free performance, it features:
Stronger actuator mounting
arrangement
Corrosion-resistant materials
Superior diaphragm design
Flexible actuator orientation
Heavy duty compression spring
MA12
Model MA12
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
CAME RON S A F - T - G A R D
A C T U A T O R S
The Saf-T-Gard Hydraulic MH 60
Series actuator is a dual piston design
which combines the greatest force value
with minimal supply pressure while
requiring a very small swept volume.
Superior piston design
Wear bearings eliminate galling
Visual indicator easily viewed
SPECIFICATIONS (MH60 Series)
Sizing for
1-13/16" through 12"
API Classication
6A, 14D
Trim
Standard - AA
Trim for retained uid components
FF
PSL*
1,2,3
Class
Standard - 1,2
5800 psi (400 Bars)
5800 psi (400 Bars) at 130F (54C)
Test Pressure
8750 psi (603 Bars)
Weight by model
6002, 6003 - 175 lbs (78kg); 6004, 6005,
6006 - 275 lbs (125kg)
Operating Temperatures - (P/U)
-20F to +250F (-29C to + 121C). For spe-
cial temperature applications, contact
engineering.
SPECIFICATIONS (MP14 Series)
Sizing for
1-13/16" through 12"
API Classication
6A, 14D, 6D
Trim
Standard - AA
Trim for retained uid components
FF
PSL*
1,2,3
Class
Standard - 1,2
170 psi
170 psi (12 Bars) at 130F (54C)
Test Pressure
255 psi (18 Bars)
Spring preload at full closed
position
1000 lbs force
Weight
190 lbs (86kg)
T= 0F to +180F (-18C to + 66C)
Volume displacement
1200 in
3
(19,656 cm
3
)
The Saf-T-Gard Pneumatic Piston
MP 14 Series actuators remarkable sim-
ple design and operating principle make it
suitable for all types of applications. The
Cameron piston actuators are inter-
changeable and versatile because they
accept a wide variety of supply gas, com-
pressed air, nitrogen or well gas.
Superior piston design
Simplied seal replacement
Actuator interchangeability
C0762
CLOSE
OPEN
MH60
C0922
MP14
Model MP14 Model MH60
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
DEMCO S E R I E S D M A P I / A N S I G A T E V A L V E S
Sight lens for open/close indication
(4" 5000 psi and larger).
Bonnet is easily removed
for in-line service.
Heavy duty, rising
stem design with
thrust bearings.
Stem seal assembly prevents
leakage into the stem area
for protection and long life.
The premier design in the oil
and gas drilling market, Demco
Series DM Gate Valves are
specically engineered for the
rigorous requirements of oileld
applications.
Designed for dependable, heavy duty per-
formance in abrasive service conditions,
Demco DM gate valves are commonly
selected for a number of oileld applica-
tions, including:
Pump manifold block valves
High pressure mud mixing lines
Standpipe manifolds
High pressure drilling system
block valves
Wellheads
Well treating and frac service
Production manifolds
Production gathering systems
Production ow lines
The Demco series DM gate valve is
offered in two basic pressure classes:
The ANSI series valves conform
to the standard ange dimension and
pressure requirements for ANSI classes
400, 600, 900 and 1500. Except for the
4" class 1500, these valves are designed
with economical, double acting threaded
stem & gate. The 4" 1500 use the same
rising stem design used in the 4" 3000
API series valve.
The API series valves conform to the
standard ange and pressure requirements
for API classes 2000, 3000 and 5000.
Except for the 4" and larger API 5000,
these valves are designed with heavy
duty, double acting rising stems.
Both series are offered with threaded,
weld and anged end connections. End
connection availability varies by size and
pressure based on market requirements.
Some sizes in the ANSI series are offered
with grooved end connections.
Unique seat design
provides drop tight
shut-off, easy
maintenance.
4" and larger API 5000 Series DM Gate Valve
(12 bolt bonnet design shown - 10,000 psi test)
(p44)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
DEMCO
S E R I E S D M A P I / A N S I G A T E V A L V E S
Features/Benets
In-line eld repairability
The bonnet is easily removed for internal
parts inspection and/or replacement with-
out removing the valve from the line.
This design simplicity permits fast and
easy service without the need for special
tools.
Flexible trim offerings
Optional materials for stems, gates, seat
inserts and seat elastomers make it easier
to trim valves for a wide range of service
conditions. Three internal plastic coatings
for the body and bonnet are offered to
improve resistance to wear and corrosion.
Double acting thread design for
fast operation
The ANSI series double acting
thread design uses a threaded stem into
the gate working with threads in the bon-
net and handle assembly. Stems are pol-
ished and include a dependable o-ring
and anti-extrusion seal. This unique
design is economical and effective.
(note: 4 1500 valve is a double acting,
rising stem design, similar to the 4 3000
valve.
The API series double acting threads
work together in a specially designed
stem screw, screw housing and stem
arrangement (except 4" and larger 5000 is
a single thread, heavy duty rising stem
design with bearings).
The rising stem design protects the
stem threads from the lading. Further
thread protection is provided by a special
stem seal assembly.
The 4" and larger 5000 psi DM gate
valve includes a sight lens to view the
stem for determining gate position.
Exclusive seat design for drop
tight sealing
The Demco Series DM gate valve seat
uses a unique design to provide a drop tight
shut off in abrasive and erosive service.
The seat consists of two identical
metal wear rings encapsulated in elas-
tomer to form a cylindrical shape with a
gate slot and two round ports. The closed
gate bears on the downstream wear ring
while the elastomer provides a drop-tight,
pressure responsive seal around the port.
The cylindrical seat assembly ts
into the matching body cavity and is
expanded outward toward the valve ports
by the bonnet and spread ring in the
bottom of the seat. The expansion occurs
when the bonnet is tightened onto the
body while engaging the seat pin
extensions from both wear rings.
This design ensures a tight seat seal
against the body and around each valve
port and has proven to be effective even
if the gate and seat ring become scored
or abraded during service.
When it comes time for maintenance,
the seat's single piece design makes it easy
to pull out of the body for replacement.
SPECIFICATIONS
Sizes
ANSI Series: 1-1/2" - 8"x 6"
API Series: 2" - 6"x 4"
Pressure Class
ANSI Series: 400, 600, 900 & 1500
API Series: 2000, 3000, 5000
Standard End Connections
Threaded,Weld and Flanged
Standard Materials
Body & Bonnet: Steel
Stem, gate and seat inserts:
Steel and Stainless Steel
Seats: Buna N, Viton
Optional Materials
Gate: Monel, Aluminum Bronze
Seat: Hypalon
Ability to comply with NACE, ABS,
DNV, Lloyds and other stringent
industry standards.
B
E
B
A
C
D
C
4" API 3000
3" ANSI 900/1500
4"API 5000 (4 bolt design shown)
F
E
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
DEMCO S E R I E S D M 7 5 0 0 G A T E V A L V E S
Meeting the tough, 7,500 psi
working pressure demands of
deep well drilling is the Demco
DM 7500 gate valve. The DM
7500 comes to this market with
proven technology from the
industry leader.
When the market demanded a 7,500 psi
drilling mud valve, the Demco DM 7500
gate valve was introduced to meet the
challenge. This is tting since Demco
DM API gate valves (2,000 to 5,000 psi)
continue to be the premium drilling mud
valves of choice, as they have been for
more than 30 years.
The Demco DM 7500 is available
in sizes 2" to 6" with butt weld end or
anged end connections.
Engineered specically for the high
pressure requirements of deep well
drilling, the Demco DM 7500 gate
valve is chosen for the following drilling
applications:
Standpipe manifolds
Pump manifold block valves
High pressure drilling system block
valves
High pressure frac service
Features/Benets
Floating slab gate design
Aslab gate with T slot stem connection
allows the gate to oat to the seat provid-
ing a tighter pressure responsive seal.
Sight lens allows operator
to determine gate position.
Rising stem design threads
protected from line medium.
Flow cleansed design.
Replaceable stem packing
without removing bonnet.
(p46)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
DEMCO S E R I E S D M 7 5 0 0 G A T E V A L V E S
out removing the valve from the line.
This design simplicity permits fast and
easy service without the need for special
tools.
Heavy duty roller bearings
Large, heavy duty stem roller bearings
reduces torque.
Unique, abrasion-resistant, one
piece seat design.
The seat assembly consists of two stain-
less steel insert/support rings to which a
resilient elastomer is permanently bonded.
The elastomer provides tight shut off
after long use in abrasive service. The
stainless steel rings are corrosion and ero-
sion resistant. The rings are specially
designed to ensure maximum bonding
strength for the elastomer. The one piece
design makes eld replacement easier.
Locking seat alignment
The seat assembly is engineered with a
metal lock shell that anchors the seat in
the bottom of the valve. This design
ensures accurate seat alignment with min-
imum resistance to ow.
Body wear rings
Surface hardened alloy body wear rings
back up both sides of the seat. These
rings extend the service life of the valve
by absorbing erosive wear that can dam-
age the body around the seat bore area.
Rising stem design
The Demco DM 7500 uses a rising stem
design which isolates and protects the
threads from the line medium. The rising
stem also indicates gate position.
Visual position indicator lens
Aclear position indicator lens allows the
operator to easily determine whether the
valve is open or closed. The indicator
lens also helps to protect the stem threads
from the weather.
Replaceable stem packing
The stem packing can be replaced with-
out removing the bonnet from the valve
(3" - 6") saving time when this mainte-
nance may be required.
Flow-cleansed design
The body cavity area is designed to
allow continuous ushing by the
uid ow. This action prevents the valve
from sanding up, even in standpipe
installations.
SPECIFICATIONS
Sizes
2" to 6"x 5"
Pressure
7,500 psi WP, 11,250 Test
Standard End Connections
Butt Weld and Flanged
Standard Materials
Body and Bonnet: Alloy Steel
Gate: Alloy Steel & Stainless Steel
Stems: 410SS & 17-4SS
Seat/seals: Buna-N & Viton
Body wear rings & seat rings: Carbon
Steel & 410SS
Optional Materials
Stems & Gates: Duplex SS
Ability to comply with NACE, ABS, DNV,
and other stringent industry standards.
A
B
E
F
D
G
C
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
DEMCO S E R I E S D T / D B G A T E V A L V E S
Known throughout the industry
for their quality design and
rugged dependability, Demco
corrosion-resistant gate valves
and accessories are made
especially for waterood and
CO
2
applications.
Demco Aluminum Bronze and Stainless
Steel Products are designed especially for
the demanding requirements of corrosive
CO
2
injection and waterood applications
in the enhanced oil recovery market.
Demco Series DT gate valves are
available in sizes 1" to 4". Demco Series
DB gate valves are available for 6" and
8" size applications.
Features/Benets
out removing the valve from the line.This
design simplicity permits fast and easy
service without the need for special tools.
Corrosion resistant materials
are standard.
Body and bonnet materials as well as all
internal wetted parts comply with NACE
RP-0475.
Stem back-seat capability
Demcos DT design allows the stem to
back-seat providing a backup stem seal
capability when the valve is in the open
position.
Rising stem design
Arising stem moves the handle up and
down providing a visible aid for deter-
mining whether the valve is in the open
or closed position.
Pressure responsive drop-tight
sealing.
Standard seats consist of 316SS seat rings
encapsulated with 90 Durometer, perox-
ide cured Buna N elastomer to provide
reliable, drop tight sealing for extended
service life.
Full through
conduit design.
Stem threads isolated
from line media.
Four ring packing set.
Flanged DT Gate Valve
(p48)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
DEMCO S E R I E S D T / D B G A T E V A L V E S
Superior Abrasion Resistance
Buna N elastomer encapsulated seats also
provide an excellent deterrent to abrasion,
further enhancing extended service life.
Four ring stem packing set.
The DEMCO DT stem seal design uses
four packing rings preventing leakage
into the stem journal and outside the valve.
Through conduit gate design
Full through conduit design assures non-
turbulent ow and gate alignment for
improved valve performance and longer
service life.
Non-wetted stem thread design
DEMCOs stem design isolates corrosive
lading from contacting stem threads pre-
venting stem seizure and assuring long
trouble free valve performance.
Accessories
Ball check valves, ow tees, strainers and
chokes are available to complete require-
ments for an entire injection assembly.
Aluminum Bronze Ball Valves are also
offered for additional requirements found
in this market.
Ball Check Valves
Flow Tees
Strainers
Bronze Ball Valves
Series DB Gate Valve
The DEMCO Series DB gate valve is
available for the larger 6" and 8" pipe
sizes in the enhanced oil recovery market.
These valves also feature aluminum
bronze body and bonnet as standard.
Internal parts are 316SS.
The exclusive seat design of the
DEMCO DB gate valve is the same
proven design found in the DEMCO
DM series gate valves. The seat consists
of two identical metal wear rings encap-
sulated in elastomer to form a cylindrical
shape with a gate slot and two round
ports. The closed gate bears on the
downstream wear ring while the elas-
tomer provides a drop-tight, pressure
responsive seal around the port. This
design provides an effective seal even if
the gate and seat ring become scored or
abraded during service.
The Demco Series DB is also eld
repairable while the valve is in line.
SPECIFICATIONS
Sizes
Series DT 1" - 4"
Series DB 6"x 4", 6" & 8"x 6"
Pressure Class
1" - 4" DT: Class 600, 900 & 1500:
6" DB: Class 600, 900 & 1500
8" DB: Class 600 & 900
End Connection
Threaded and Flanged, see product
specication section for sizes.
Standard Materials
Body & Bonnet: Aluminum Bronze
Stem, gate and seat inserts: Stainless
Steel
Optional Materials
DT: Stainless Steel Body and Bonnet
Viton or P-10 seats
DB: Viton seat elastomer
SD016080
A
B
E
C
D
Ball Check Valves
Series DT Gate Valve
Flow Tees
Strainers
F
G
H
Series A Bronze Ball Valve
I
SD-016080
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
(p51)
W-K-M D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F L Y V A L V E S
The high performance buttery
valve that brings low cost and
light weight to high pressure
water, oil, steam, gas and slurry
applications.
W-K-M DynaCentric buttery valves sat-
isfy a wide range of industrial applications.
Available in carbon steel or stainless steel
as well as lug and wafer body styles, they
may be specied in sizes from 3" to 24"
and pressure classes up to 600, 3" to 12",
and up to class 300, 14" to 24".
nance-free performance in a variety of
uses, the W-K-M DynaCentric High
Performance buttery valve is most
commonly selected for the following
applications:
Chemical and petrochemical processing
Utilities
Pulp and paper
Oil and gas production
Fuel handling systems
Air conditioning and refrigeration
Marine
The DynaCentric buttery valve
offers the high performance of ball and
gate valves with the low-cost, light-weight
benets of a buttery valve design. It is
ideal for handling water, oil, steam, gas
and slurries.
Features/Benets
Two body styles
Flangeless wafer and threaded lug styles
are available.
Heavy duty eccentric disc
Its wide sealing area is designed to
reduce seat wear.
Thrust bearing/disc spacer
Acorrosion resistant, single component
thrust bearing/disc spacer reduces body
wear and assures positive centering of
disc in the valve bore.
Internal stop
Prevents disc overtravel and seat damage.
Heavy duty eccentric disc
with wide sealing area is
designed to reduce seat
wear.
Combination thrust
bearing/disc spacer
reduces body wear,
and positively centers
disc in valve bore.
Capscrews are outboard of lading
to prevent corrosion, and are
positioned compatible with all
ange gaskets including API 601
spiral wound types.
Internal stop prevents
overtravel and seat
damage.
ruggedly constructed
from 17-4 PH condition
H1150 Double aged.
Lug body seat retainers
are designed to minimize
deection, providing full-
pressure, end- of-line
capabilities.
Close tolerance ange alignment
holes in body help center valve in
piping and prevent wrong valve
from being installed.
Combination of three seat types
offers drop-tight sealing to 1480
psi, handling of ladings up to
1000F and re-safe protection
in either direction of ow.
Body gasket provides
tight seal between seat
retainer and body.
Low friction, high load journal
bearings provide low torque
operation. They require no
additional lubrication and are
highly resistant to solvents,
industrial chemicals, sludge
and dirt contamination.
Stem disc springs allow thermal
expansion and provide constant
grounding of disc/stem to body.
Wafer style shown
SD-11681-96
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
(p52)
W-K-M
D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F L Y V A L V E S
Three seat designs
The standard polymer seat (SO2) is
bi-directional with an extended pressure
responsive sealing lip. The patented
re-tested, bi-directional metallic seats
(FO2) provide a metal-to-metal pressure
responsive seal. Properly tted with
metallic seats and high temperature seals,
DynaCentric valves have demonstrated
they are capable of providing re-test
performance in accordance with API 607.
This unique design provides re-test
capabilities regardless of ow direction.
Valves constructed of 316 stainless
steel and assembled with the proper trims
and Ni-Cr Alloy (UNS No. 6625) seats
(M03) are capable of handling tempera-
tures to 1000F. MO1 seats are suitable
for temperatures to 750F.
Drop tight sealing to 1480 psi.
SO2 and FO2 seat designs provide drop
tight sealing: SO2 to 720 psi, FO2 to
1480 psi.
Disc design reduces seat wear
Precision machined from carbon steel
or alloy steels, the rugged valve disc is
designed for gradual engagement into
seat to prevent pinching or cutting.
Eccentric positioning of stem allows disc
to swing free of seat in open position,
reducing operating torque and wear.
Special surface coatings such as stellite
overlay are available for critical or severe
service conditions.
SPECIFICATIONS
Sizes
3" - 24"
Working pressures
Up to 1480 psi
(3" - 12" ANSI Class 150, 300, 600)
(14" - 24" ANSI Class 150, 300)
Up to 1000F (538C)
Body Styles
Flangeless wafer, threaded lug.
Standard Materials
Body - carbon steel, stainless steel
Stem - 17-4 stainless steel
Disc - stainless steel
Seat - SO2 - RTFE
FO2 - re-safe
MO1/ MO3 - metal seat
Optional Materials
Seat/seal trims available for several
hundred ladings.
A
B
E
C
Positively retained stem prevents
blowouts
The tamper-proof design not only meets
but exceeds the requirements of ANSI
B16.34. The disc, disc pins and stem
design meet ASME requirements for
maximum torsional and bending stress.
Additional blowout prevention is provid-
ed, should stem or disc pin failure occur.
Seat retainer has many advantages
Lug body seat retainers are designed to
minimize deection and provide full-
pressure, end-of-line sealing capability.
Seat retainer capscrews for both wafer
and lug body designs are outboard of the
lading to prevent corrosion and positioned
so they do not interfere with ange gasket
seals, including API 601 standard spiral
wound gaskets. An additional body joint
gasket on metal seated valves between
seat retainer and body assures zero leak-
age. Absolute containment of the lading
is assured under the most adverse condi-
tions of shock, vibration or line stress.
Deep stufng box for extended life
Deep stufng box design includes
stainless steel fasteners as standard and
is available with TFE chevron or high-
temperature compression packing for
long life and positive stem seal. Live
loaded packing assemblies and double
stufng box with purge/monitor port
available upon special request for
critical applications.
FO2
MO1/MO3
SO2
Offset from
center of valve
Offset from center of seat
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
(p53)
DEMCO S E R I E S N E - C B U T T E R F L Y V A L V E S
Acclaimed as the most durable of
all resilient-seated buttery valves
in the industry, this valve excels
in a wide variety of applications.
Cast in both wafer and tapped-lug patterns
in a wide variety of material choices,
Demco buttery valves feature a one-piece
body for minimum weight and maximum
strength. The unique stem hole design in
the disc ensures a dry stem journal, and
the hard-backed seat (2" - 36") allows
ease of installation, reliable operation,
and is eld-replaceable without special
tools. Demco buttery valves are avail-
able in sizes 2" thru 48".
Engineered for long-term, mainte-
nance-free performance, Demco buttery
valves are commonly selected for a vari-
ety of applications spanning a wide range
of industries:
Chemical and petrochemical
Agriculture
Oil and gas drilling and production
Food and beverage
Water and waste water
Cooling towers (HVAC)
Power
Mining and materials
Dry bulk handling
Marine and government
Features/Benets
Bi-directional sealing
This valve provides bi-directional sealing
at full-rated pressure with identical ow-
way from either face.
Integral ange seal
Molded into the edge of the seat is an
integral ange seal which accommodates
ANSI weld neck, slip-on, threaded and
socket anges as well as stub end
type C anges.
ANSI class 150 rating
Body rating is ANSI class 150 (285 psi
non-shock). Wafer body diameters are
Blowout proof stems
Flatted double Dupper stem
Bronze bearings
Triple stem seal
High ow disc
Hard backed
cartridge seat
(2" - 36")
MSS SP-25 marking is standard.
Positively oriented disc
One piece body
Large ange top for ease of
power automation. (Full line of
actuation and accessories offered.)
Wafer style shown
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
(p54)
DEMCO
S E R I E S N E - C B U T T E R F L Y V A L V E S
designed to self-center in ANSI 150
ange patterns.
Multiple pressure ratings
Three drop tight pressure ratings are
offered for 2" to 12" sizes. Normally, 200
psi shutoff is used in buttery applications.
However, 285 psi shutoff is optionally
available for higher pressure applications.
For smaller actuator sizing, 50 psi valves
offer reduced torque. 50 psi and 150 psi
drop tight pressure ratings are offered on
14" to 48" sizes. For minimum torque
where drop tight closure is not required,
throttling valves are available.
A
B
C
D
SPECIFICATIONS
Sizes
2" - 48"
Body type and style designations
Long neck NE-C and NF-C: 2" - 48",
wafer and lug 2" - 36", 42" - 48" anged.
Short neck NE-I, NE-I Sanitary and NE-IT:
2" - 12", wafer and lug.
Notched NE-D: 2" - 12", wafer
Pressure rating
2" - 12" 0 (Throttling), 50, 200 and 285 psi
14" - 48" 0, 50 and 150 psi
-30F to +300F (-34C to +204C)
depending on seat material selection
and application
Standard Material Options
Bodies and discs: Iron, steel, stainless
steel and bronze
Seats: Buna, EPT, Viton, Neoprene
Stems: 416 SS, 316SS, Monel
replacement because it is slip tted into
the body, with no need for special tools.
Positively oriented disc
Proper orientation of the stem/disc
connection is assured by the rectangular
drive. In 2" - 24" size valves, the disc is
permitted to oat on the stem to perfectly
center in the valve seat. This design
enhances drop tight sealing and prolongs
service life.
End-of-line service
Lug body valves may be used in end-of-
line service, with downstream piping
removed. (Only weld neck or socket
anges can be used for this service.)
Since upstream pressure is excluded
between the ange and the seat face by
the exclusive Demco ange seal, there is
no effective force to slide the seat down-
stream. Demco 2" - 12" Lug Buttery
Valves are suitable for liquid service up
to 200 psi with downstream piping
removed (150 psi 14" - 36").
Lug body valves are recommended
for isolation of pumps, control devices
or other system components which may
need to be removed for repair or replace-
ment. Lug valves are also suitable for
installation at points from which piping
expansion may proceed. Such valves
are normally blanked with blind anges,
to protect the exposed seats, until new
piping is attached.
Dry stem journal eliminates
potential for leakage
The Demco disc is uniquely designed
with a continuous annular raised land
around the stem hole and disc edge which
presses into the seat at at every angular
position. The resilient seat presses back
with a higher specic force than the line
pressure, preventing leakage to the stem.
In addition, two O-ring ribs are provided
in the seat stem bore creating a triple
stem seal.
In competitive stem seal designs
with boot seats, a seal is accomplished
by an interference squeezing on the
stem or an O-ring in the stem journal.
The potential for leakage behind the
seat is high. As the disc wipes the seat,
elongation of the stem seal area allows
leakage to collect behind the seat. This
condition is eliminated by Demcos dry
stem journal and hard-backed seat.
Hard-backed cartridge seat (2"- 36")
The Demco cartridge seat is constructed
by permanently bonding a resilient elas-
tomer to a rigid backing ring. In addition
to superior sealing integrity, this design:
1) makes valve installation easier because
no special precautions are required for
disc position. This is especially advanta-
geous when installing valves with fail
closed actuators; 2) eliminates high
torque and premature failure caused by
elastomer distortion as found in other
non-rigid seat designs; 3) simplies seat
Hard-backed seat
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
(p55)
DEMCO S T Y L E S A N D A C C E S S O R I E S
This versatile valve comes in a
variety of styles to suit an even
wider range of applications. In
addition, a variety of quality
accessories are available to
further enhance its suitability
to the application.
Series NE-C Valve
Sizes 2" to 12", this series is a general
purpose valve with neck length designed
to provide full clearance of the valve top
over two inches of insulation on ANSI
150 pipe anges; available in both wafer
and lug styles.
Series NE-I Valve
Sizes 2" to 12", it is suited for a wide
range of applications in many industries,
including food and beverage utilities and
process ow lines. This short neck design
is offered in a wide variety of body mate-
rials. The valves are designed for installa-
tion between ANSI 125/150 anges.
Series NE-D Valve
Sizes 2" to 12", it is a short neck valve
with body notches to t popular light-
weight ange patterns, making it ideal for
bulk material handling and the transporta-
tion industry. Valves will also center in
ANSI 125/150 anges.
Series NF-C Valve (14" - 48")
Sizes 14" to 36" are available in both
wafer and lug styles. The wafer body has
two drilled locator lugs at top and bottom
for ANSI 150 anges. Bronze bearings
are installed on both stems for minimum
operating torque. 42" and 48" sizes are
available with anged bodies.
Series NE-I Sanitary Valves
Sizes 2" - 12", it is similar to our Series
NE-I valve, but is exclusively designed to
meet the rigorous requirements of sani-
tary service in the food and beverage
industry. The body is available in bronze,
stainless steel, aluminum or electroless
nickel-coated ductile iron. FDA-
approved materials are used for all wetted
parts. Handle parts are bronze and stain-
less steel, permitting caustic washdown.
Other benets include:
Demco dry journal stem seal
system gives absolute assurance of sani-
tary buttery valve construction.
Drilled passageways, a design orig-
inated by Demco, vent the entire interior
of the disc to atmosphere. No closed
chamber is provided for the culture of
undesirable organisms.
Discs are produced from investment
castings, smooth and non-porous. Stem
bosses are minimized for increased ow.
The projecting inner surface of the
resilient seat contacts and is compressed
by the mating ange to form a smooth
and uninterrupted ow way. This positive
seal between the innermost contact of the
seat and ange ensure aseptic conditions
after a piping ush.
Series NEI-T Teon Valves
Because of the inert, aseptic non-stick
character of Teon, Demcos NEI-T
Teon-lined buttery valve is ideal for
clean lines in food and beverage plants.
The Teon seat consists of a virgin Teon
liner overlaying and bonded to an elas-
tomer cushion (either Buna-N or EPT are
available) which provides resilience for
sealing. The Teon liner extends over the
seat faces, completely covering and seal-
ing the resilient material from contact
with line uids.
Exclusive design features of this
valve conne wetted parts to the disc and
seat. The stems and body are permanently
sealed from line uids. The ow way
formed with adjacent piping is free of
traps to assure aseptic conditions when
the lines are ushed. The series NEI-T
also features the same vented disc and
stem design as the NE-I Sanitary valve.
A
B
C
D
D
Sanitary Features
Series NF-C 16"
Series NF-C 30"
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
(p56)
DEMCO
S T Y L E S A N D A C C E S S O R I E S
Actuators
Demco Series DR pneumatic actuators
(A1) are available in double-acting or
fail-safe, spring return models. Series DR
actuators are compact, high-torque, piston
actuators. Series R diaphragm actuators
(A2) incorporate a heavy-duty, enclosed
rack-and-pinion linkage. Diaphragm actu-
ators are suitable for low-pressure, pneu-
matic service. Electric actuators (A3) are
used when compressed air is not available
for pneumatic operations.
Handles and stem extensions
Three basic handle designs interchange
on any 2" to 12" valves: ten position
locking, two position locking and memo-
ry stop. Memory-stop handles provide
throttling which is innitely adjustable
and can be set by a lock nut with memo-
ry-stop setting (adjustable open stop).
Handles are available in basic trim, corro-
sion-resistant trim and sanitary trim. Stem
extension are fabricated from carbon steel
parts and contained in a tubular housing.
Gaskets or O-rings seal the stem exten-
sion at top and bottom. These extensions
are fabricated to specied lengths.
Gear operators
Demco weatherproof gear operators are
offered with a choice of handwheel,
chain-wheel, or square nut. The worm
gearing has self-locking set screws to
control open and closed positioning or
an optional adjustable memory stop for
balance return to a preset open
position after closing.
B
C
Series R diaphragm actuator
Stem extension
with handle
on Series NE-I
buttery valve
Electric actuator
Gear operator
Demco NE-C wafer with
Series DR actuator.
A3
A2
A1
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
G A S A N D L I Q U I D S P I P E L I N E S
(p58) A P P L I C A T I O N S
Cameron Welded Body Ball Valve
One of the most relied on for pipeline applications, Cameron Welded Body Ball Valves combine the strength of forged steel components
with compact, spherical design.
From the famous Cameron Welded Ball
Valve and Foster D-Seal gate valve to
the wide array of W-K-M ball and gate
valves, the performance standard for valves
in gas and liquids pipeline service is most
often set by Cooper Cameron Valves. For
more than six decades, our pipeline valves
have been proven under any and all oper-
ating conditions. Constant improvement
of valve design and materials means that
you get more than long service life from
our products. You get peace of mind, too.
Choose Cooper Cameron Valves for
reliable, cost-effective service in the
following pipeline applications:
Loops
Meter/ recovery stations
Mainlines
Crude oil
Rened products
Gas transmission
Storage manifolds
Compressor stations
Sphere launching
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
G A S A N D L I Q U I D S P I P E L I N E S
W-K-M DynaSeal 370D4 2"-6"
Class 150 Ball Valve
W-K-M DynaSeal 310 Threaded End
Floating Ball Valve
W-K-M DynaSeal 370CT
Trunnion Ball Valve
Demco NE-C Buttery Valve
W-K-M DynaSeal 370D4 2"- 6"
W-K-M DynaSeal 310/210 Flanged End
Floating Ball Valve
W-K-M DynaSeal 370E4
Trunnion Ball Valve
W-K-M Pow-R-Seal Gate Valve
Cameron Bolted Body Ball Valve
Buttery Valve
Foster D-Seal Gate Valve
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
O I L A N D G A S P R O D U C T I O N
The ball valve designed for a variety of demanding applications, WKM DynaSeal Trunnion Ball Valves are widely used in oileld
applications around the world.
DynaSeal 370E4 Ball Valve
With more than 75 years experience in
oil and gas production, the valve, choke
and coupling brands manufactured by
Cooper Cameron Valves represent some
of the world's most highly respected and
widely chosen ow control products,
onshore and offshore. From small, low-
pressure lines to the largest bore oil and
gas well outputs, Cooper Cameron valve
products have met the challenge. These
products have dependably handled every-
thing from scorching deserts to frozen
arctic environmentswhatever the indus-
try can dish out within this range of pun-
ishing applications.
EOR / Waterood
Flow lines
Tank farms
Manifolds / headers
Offshore manifolds / headers
Drilling mud valves
Mud tanks / systems
Compressor skids
Generator skids
Separator skids
Field gas and crude oil plants
Fire water cisterns
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Cameron Bolted Body
Ball Valve
W-K-M 210A/210L
Ductile Iron Ball Valve
O I L A N D G A S P R O D U C T I O N
W-K-M DynaSeal 370D4 2"-6"
Class 150/300 Ball Valve
W-K-M DynaSeal 310
Threaded End Floating
Ball Valve
Trunnion Ball Valve
W-K-M DynaSeal 210/310
Flanged End Floating
Ball Valve
Cameron Welded Body
Ball Valve
W-K-M Pow-R-Seal
Gate Valve
W-K-M DynaCentric
High Performance
Buttery Valve
Foster D-Seal Gate Valve Thornhill Craver
Adjustable Choke
Demco DT Gate Valve
Demco NE-C Buttery Valve
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
I N D U S T R I A L
With their wide variety of body styles and trim packages, the Demco family of buttery valves are among the most commonly chosen by
an impressive array of industries.
Demco Buttery Valve, lug body
Our large and diverse family of valve
products is ideally suited for a wide range
of industrial and processing applications.
Recognized worldwide as the quality and
performance leaders, Cooper Cameron
Valves handle even the toughest jobs. In
our broad line you'll nd a valve with the
material and design specications you
need. Top entry or end entry, threaded or
bolt-together, standard or exotic trim
packagesits all here. We serve the fol-
lowing industrial applications and more:
Chemical & petrochemical
Polyethylene
Steam
Olens
Mining
Acid leaching lines
Mill water
De-watering
Pharmaceuticals
Bulk handling
Inert gases
Fuel systems
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M DynaSeal 310C
Floating Ball Valve
with pneumatic actuator
W-K-M DynaSeal 370D4
8"- 12" Class 600
Trunnion Ball Valve
W-K-M DynaSeal 310D
Flanged End Floating Ball
Valve, 2-piece design
Trunnion Ball Valve
W-K-M- DynaSeal 310C
I N D U S T R I A L
W-K-M DynaSeal 310C
Threaded End Floating Ball
W-K-M DynaSeal 310D
Valve, Unibody design
W-K-M DynaSeal 370E4
Trunnion Ball Valve
Trunnion Ball Valve
2"- 6" Class 600
Trunnion Ball Valve
Cameron Bolted Body
Ball Valve
W-K-M DynaSeal 310C
Floating Ball Valve,
2-piece design
Demco Buttery Valve,
wafer body
W-K-M DynaCentric High
Performance Buttery
Valve, lug body
Performance Buttery
Valve, wafer body
W-K-M Pow-R-Seal
Gate Valve
Foster D-Seal Gate Valve
Demco NE-C Wafer
with Series DR actuator
Performance Buttery Valve
Trunnion Ball Valve
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
A F T E R M A R K E T S E R V I C E S
The same level of commitment
that has made Cooper Cameron
Valves the market leader in valve
products the world over is now
present in the Aftermarket
Services sector of the business.
Full remanufacturing
The high level technical expertise in
valve design and sealing technology
developed for the Cameron, W-K-M,
Foster, and Demco valves, is now avail-
able in re-manufactured products from a
growing number of Cooper Cameron
Valves aftermarket facilities strategically
located throughout the world.
Multiple services
Customer property management, valve
repair, valve exchange, responsive eld
service and the sale of remanufactured
valves are all part of the new Cooper
Cameron Valves aftermarket program.
Customer property management is
available on its own or as part of
Camerons Total Vendor Management
program, in which our experience is sec-
ond to none. Designed to reduce the total
cost of ownership, it is based on a con-
tract covering all your equipment.
Our exchange program gives us a
whole new level of exibility in pricing
and deliverability. It allows us to take
your valve in trade for a merchandise
credit against future purchases, or to sim-
ply buy your surplus inventory and struc-
ture a mutually benecial working rela-
tionship. Installation, routine mainte-
nance, and emergency repairs are offered
to t customer needs through our eld
service. We also offer a comprehensive
parts inventory which provides quality
spare parts whenever and wherever they
are needed.
Complete record keeping
Cooper Cameron Valves quality assur-
ance and quality control programs are
second to none. As in new product manu-
facturing, our quality management dic-
tates we keep complete records for you
when we repair a valve or provide you
with a remanufactured valve. Our test
programs are consistent with the applica-
ble standard(s) in effect at the time of
shipment, and all testing is documented
and available to be shipped with the
product. Our goal is to provide you
with a wider array of solutions each
time you call.
Cooper Cameron Valves aftermarket
facilities also provide warehouse,
inventory, customer property manage-
ment and maintenance services.
This enables customers to reduce idle
inventory, and to lower their own
warehousing and documentation
expenses
CCVs aftermarket facilities offer
comprehensive remanufacturing and
repair services.
These facilities maintain the same
exacting specications and quality
control as our world class manufac-
turing facilities.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
A F T E R M A R K E T S E R V I C E S
CCVs aftermarket service also
includes a valve exchange program,
which offers maximum exibility to
work within constrained budgets.
CCV will take valves in trade, offer
merchandise credit against future pur-
chases, or buy surplus inventory to
structure a mutually benecial working
relationship with customers.
CCV offers a wide range of eld ser-
vices to t customer needs, including:
Installation
Routine Maintenance
Emergency Repairs
CCVs aftermarket service also includes
a comprehensive parts inventory which
provides quality spare parts whenever
and wherever they are needed.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
S A L E S O F F I C E S A N D P L A N T S
(p66)
S A L E S O F F I C E S A N D P L A N T S
SALES LOCATIONS
ALABAMA
Tel: (334) 887-5552
Fax: (334) 821-3702
CALIFORNIA
Tel: (805) 631-1550
Fax: (805) 631-1510
COLORADO
Tel: (303) 841-1693
Fax: (303) 841-5486
LOUISIANA
Houma
Tel: (504) 868-6343
Fax: (504) 851-1868
Tel: (504) 872-4062
Fax: (504) 851-1868
Marrero
Tel: (504) 328-1060
Fax: (504) 328-1060
New Orleans
Tel: (504) 529-7634
Fax: (504) 522-8837
New Iberia
Tel: (318) 367-3478
Fax: (318) 367-5751
MAINE
Tel: (207) 647-5906
Fax: (207) 647-8929
MISSOURI
Tel: (314) 447-5645
Fax: (314) 447-7672
NEVADA
Tel: (702) 787-0297
Fax: (702)787-0797
NEW MEXICO
Tel: (505) 326-4369
Fax: (505) 564-8191
OHIO
Tel: (614) 799-8897
Fax: (614) 799-8949
OKLAHOMA
Tel: (918) 622-9641
Fax: (918) 438-8367
TEXAS
Canyon
Tel: (806) 655-5999
Fax: (806) 655-1780
Corpus Christi
Tel: (512) 289-0535
Fax: (512) 289-2842
De Soto
Tel: (972) 218-9700
Fax: (972) 218-9701
Houston
Tel: (713) 983-0314
Fax: (713) 983-9612
Odessa
Tel: (915) 362-1161
Fax: (915) 362-1173
UTAH
Tel: (435) 781-0434
Fax: (435) 789-5656
WYOMING
Tel: (307) 473-8502
Fax: (307) 577-3015
WISCONSIN
Tel: (414) 679-9880
Fax: (414) 679-9881
ARGENTINA
Tel: 54-1-811-4000
Fax: 54-1-811-0909
BRAZIL
Tel: 55-11-3066-3600
Fax: 55-11-3064-6228
CANADA
Tel: (403) 261-2800
Fax: (403) 262-5181
CHILE
Tel: 56-61-213-931
Fax: 56-61-214-379
FRANCE
Tel: 33-4-67-111-502
Fax: 33-4-67-111-504
MEXICO
Tel: 52-5-580-0296
Fax: 52-5-395-8669
PLANTS
LOUISIANA
Tel: (318) 363-7500
Fax: (318) 363-7516
Tel: 1-800-637-5002
OKLAHOMA
Tel: (405) 631-1321
Fax: (405) 629-0420
TEXAS
Livingston
Tel: (409) 327-4858
Fax: (409) 327-3218
Missouri City
Tel: (281) 499-8511
Fax: (281) 499-5211
Tel: 1-800-323-9160
CANADA
Tel: (403) 435-0777
Fax: (403) 435-0700
FRANCE
Tel: 33-4-67-111-500
Fax: 33-4-67-116-00
MEXICO
Tel: 52-29-811-008
Fax: 52-29-811-009
SINGAPORE
Tel: 65-861-3355
Fax: 65-861-6197
SCOTLAND
Tel: 44-1506-444-000
Fax: 44-1506-441-320
VENEZUELA
Tel: 58-61-312-960
Fax: 58-61-310-638
FOR GLOBAL E-MAIL CONTACT DAN DUSEK askus@ccvalve.com
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
P R O D U C T S P E C I F I C A T I O N S C O N T E N T S
(p67) P R O D U C T S P E C I F I C A T I O N S C O N T E N T S
Ball Valves
Cameron Welded Ball Valves
Full and Reduced Opening
150 Lb. Class
300 Lb. Class
400 Lb. Class
600 Lb. Class
900 Lb. Class
1,500 Lb. Class
2,500 Lb. Class
API Flanged End
Dimensional Data
W-K-M Ball Valves
DynaSeal 370CT
370 Series
DynaSeal 370D4
Dimensional Data
Stem Torques, Weights and Flow Characteristics
DynaSeal 370E4
Dimensional Data
Dimensional Data
Dimensional Data
DynaSeal 310 Series
Trim Guidelines
Pressure/Temperature
DynaSeal 310C Parts Detail
DynaSeal 310D Parts Detail
Standard Materials
Dimensional Data
DynaSeal 210A
Ductile 210D
DynaSeal 210L
DynaSeal 210F
Stem Torques, Weights, Pressure/Temperature
Dimensional Data
Chokes & Couplings
Choke Accessories
Dimensional Data
Thornhill Craver Force Balanced Chokes
UNIBOLT Couplings
Gate Valves
Foster D-Seal
Actuation Data
W-K-M Pow-R-Seal
Dimensional Data
Actuation Data
Classes
400,600
900,1500
1500 4"
2,000 3,000 5,000 WP
4", 5", 6" 5000 WP
Dimensional Data
Demco Series DT
Demco Series DB
Butterfly Valves
Standard Materials
Seat-Seal Material Codes and Ratings
Valve Body Pressure Ratings
Valve Sizing Formulas
Flow Characteristics
Torque Values
Dimensional Data
Demco Series NE-C, NE-I, NE-D, NEI-T 2"-12"
Dimensional Data
Butterfly Valve Handles
Weatherproof Gear Operators
DR Series Piston Actuators
Electric Actuators
Diaphragm Actuators
Stem Extensions, Tees and Adapters
Standard Material Data
TECHNICAL DATA
CONTENTS MENU
CONTACT
www:
PRINT
CONTACT
HELP
(p68) P R O D U C T S P E C I F I C A T I O N S
Specify the following when ordering a
Cameron Ball Valve:
1. Valve figure number (see chart below).
2. End and bore sizes.
3. Pressure classification (ANSI 600 lb, API 3000 psi).
4. Type of end connections (unequal ends can be furnished).
For weld end valves, specify I.D. or O.D., wall thickness and
grade of pipe.
5. Type of operator.
6. Stem extension, if desired. Specify distance from valve
centerline to center of handwheel, or top of power operator
mounting flange.
7. Type of trim or application.
8. Accessories, if desired (lifting eyes, locking devices, etc.).
Handwheels are included with valves, but operating levers
must be ordered separately.
Information on special trims and API configurations is
available upon request.
Specify the following when ordering another manufac-
turers power operator to fit a Cameron Ball Valve:
1. Valve size and pressure class and, if for field conversion,
the present operator.
2. Maximum differential pressure across valve during
operation and any abnormal operating conditions.
3. Speed of opening and closing, probable frequency of
operation.
4. Type operator desired (electric, hydraulic, pneumatic).
5. Information on operating medium. If electric: voltage, fre-
quency, single or three phase, open or explosion-proof motor.
If hydraulic or pneumatic: operating medium, pressure.
6. Accessories and controls: limit switches, instrumentation,
valving, tanks, pumps, etc.
How to Order
Pressure End
Classification
Classification
Opening
Connection
Operator Trim
80 06 0 1 2 1
80 ANSI
81 API
82 AFNOR
83 DIN
84 UNI
0 Full
7 Reduced
4 Venturi
9 All Others
1 RF/RF
2 WE/WE
3 RF/WE
4 RTJ/RTJ
5 RTJ/WE
9 All others
1 Lever
1A Extension Lever
2 Worm Gear
2A Extension Worm Gear
4 Subsea Gear
4A Subsea Gear 300'+
7 Direct Stem
7A Extension Direct Stem
8 Worm Gear/Adapted
8A Extension Worm
Gear/Adapted
22 Square
22A Extension Square
Nut /Mtg/Flg
23 Worm Gear W/2"
Square Operating Nut
23A Worm Gear with Right
Angle Pinion Shaft
Extension and 2"
Square Operating Nut
1 Standard (150-1500)
2 Standard API (2000-5000)
4 Hi-Temp Teflon (150-600)
8 Lo-Temp Nylon (150-2500)
123 Pressure Regulating
(150-1500)
212 NACE/(150-2500)
213 NACE/(2000-5000)
214 Tefzel/NACE (150-1500)
215 Tefzel/NACE (2000-5000)
216 NACE/Lo-Temp (150-2500)
217 NACE/Lo-Temp (2000-5000)
222 NACE/Hi-Temp (150-600)
259 NACE/316 Inlay (150-2500)
01 ANSI 150
03 ANSI 300
04 ANSI 400
06 ANSI 600
09 ANSI 900
15 ANSI 1500
25 ANSI 2500
20 API 2000
30 API 3000
50 API 5000
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
CAME RON
W E L D E D B O D Y B A L L V A L V E S
Standards
Cameron ball valves conform to one or more of the following
specifications for pressure, temperature ratings and dimensions:
ANSI, API-6D, API-6A, DIN, AFNOR, British Standards, and
ISO 9000.
Trim Numbers
Trim Pressure Rating Temperature Rating Corrosion Resistant
Regular
(NACE MR01-75)
Standard Class 150-2500 -20 to +250F (-29 to +121C) 1 212
API 2000-5000 -20 to +250F (-29 to +121C) 2 213
Low Temperature Class 150-2500 -50 to +250F (- 46 to +121C) 8 216
API 2000-5000 -50 to +250F (-46 to +121C) 217
High Temperature Class 150-600 -20 to +375F (-29 to +190C) 4 222
Tefzel Class 150-1500 -20 to +300F (-29 to +149C) 140 214
(Acidizing) API 2000-5000 -20 to +300F (-29 to +149C) 108 215
Tefzel Class 150-1500 -50 to +300F (- 46 to +149C) 223
Low Temperature API 2000-5000 -50 to +300F (- 46 to +149C)
Duplex (Internal) Class 150-1500 -20 to +250F (-29 to +121C) 276
Stainless Steel
Full Duplex Class 150-1500 -50 to +250F (- 46 to +121C) 504
Stainless Steel
Pressure Range Class 150-2500
Temperature Range
20 to +250 F
29 to +121 C
Body ASTM A350 Gr. LF-2(M)
End Connection ASTM A350 Gr. LF-2(M)
Ball ASTM A694 Gr. F50(M) Cr. Pl.
Seat Ring AISI 1040
Seat Load Spring AISI 1040
Stem Seals PTFE
Lip Seals PTFE
Seat Ring Insert Nylon
Dimensional Codes for
Cameron Manual Operators
Code Identification:
H Center of bore to top of square nut for lever operated valves,
center of bore to handwheel for gear operated valves
L Center of bore to end of lever
G Handwheel diameter
Dimensional Codes for Flanged and
Weld Ends (Full and Reduced Openings)
Code Identification:
A End-to-end (length dimension)
B Bore diameter
C Centerline-to-bottom
D1 Flange outside diameter
D2 Flange inside dimension
E Sphere dimension
E
B
A
C
D1
D2
H
L
G
H
SD-24027 SD-24028 SD-24029
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
Materials
Materials used in ball valve construction are broadly equivalent
at all Cooper Cameron Valves manufacturing plants. However,
the availability of local supplies, the need to conform to national
standards and to offer various trims may necessitate some
variations. In corrosive applications, valve trims can be offered
using various types of alloys and stainless steels. For more
information on material specifications and properties, please
contact your local Cooper Cameron Valves representative.
Torque Information
Please contact your Cooper Cameron Valves representative
to obtain a copy of the engineering bulletin which provides
detailed torque information for sizing of power actuators.
Optional Trim Materials
Trim Materials for Standard Valves
Other trims are available upon request.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
CAME RON F U L L O P E N I N G 1 5 0 L B . C L A S S B A L L V A L V E S
285 psi WOG (20.0 kg/cm
2
)
450 psi TEST (31.6 kg/cm
2
)
A
L
D1
H
G
H
C
D2
E
B
2 2.06 1 7 7.5 6 2.06 #11 3.94 5 24 6.34 39 32
3 3.13 1 8 8.5 7.5 3.13 #12.5 5.12 6.75 24 7.44 64 58
4 4.06 1.5 9 9.5 9 4.06 14 5.94 8.5 36 8.43 88 79
6 6 1.5 15.5 16 11 6 18 7.91 11.25 36 10.43 263 237
8 8 2 18 18.5 13.5 8 #21.5 10 15.5 18 12.55 380 341
10 10 2 21 21.5 16 10 #23.5 12.12 18.5 18 14.54 633 567
12 12 3 24 24.5 19 12 #26.5 14.5 22.36 18 20.14 980 870
14 13.25 3 27 27.5 21 13.25 *28.5 14.64 24 24 21.16 1215 1075
16 15.25 3 30 30.5 23.5 15.25 *30.5 16.01 26.32 24 22.52 1510 1330
18 17.25 4 34 34.5 25 17.25 *33.5 19.25 29.2 24 26.19 1904 1684
20 19.25 4 36 36.5 27.5 19.25 *35.5 20.81 32.27 18 27.75 2468 2008
22 21.25 4 40 40.5 29.5 21.25 *38.5 22.28 36 18 29.22 3734 3327
24 23.25 4 42 42.5 32 23.25 * 42 23.69 38.76 18 30.63 4184 3610
26 25 5 45 34.25 25 *44.5 26.49 41.75 24 34.34 5066 4385
28 27 5 49 36.5 27 * 47 27.88 44.86 24 35.72 6261 5468
30 29 5 51 38.75 29 * 49 29.51 47.9 24 37.37 7427 6607
34 32.75 5 58 43.75 32.75 *54.5 32.16 53.64 30 40.01 10123 9140
36 34.5 5 60 46 34.5 *56.5 33.76 56.83 36 41.6 12012 11003
40 38.5 7.5 69 50.75 38.5 * 65 40.14 65 30 50.25
42 41.25 7.5 72 53 41.25 *66.5 41.78 68.6 42 51.89
48 46.5 7.5 80 59.5 46.5 * 84 45.9 77
Flanged End L Size
Data for Valve with Operator
Normally Furnished
Approx. Wt. lb.
Nom
Diam.
in.
Ball
Bore
B in.
Stem
Size
in.
Raised
Face
Length
A in.
Ring
Joint
Length
A in.
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in. H
in.
Flange Weld
WeldEndL
L Length (A) of a weld x flanged end valve is one half the sum of lengths (A)
of a weld end and of a flange end of the same size and rating.
* Short pattern. # Length exceeds specified dImension in API 6D.
Dimensions of 26" through 42" flanges are per MSS-SP-44.
50.8 52.3 25.4 177.8 190.5 152.4 52.3 #279.4 100.1 127.0 609 161.0 18 15
76.2 79.5 25.4 203.2 215.9 190.5 79.5 #317.5 130.0 171.5 609 189.0 29 26
101.6 103.1 38.1 228.6 241.3 228.6 103.1 355.6 150.9 215.9 914 214.1 40 36
152.4 152.4 38.1 393.7 406.4 279.4 152.4 457.2 200.9 285.8 914 264.9 119 108
203.2 203.2 50.8 457.2 469.9 342.9 203.2 #546.1 254.0 393.7 457 318.8 171 153
254.0 254.0 50.8 533.4 546.1 406.4 254.0 #596.9 307.8 469.9 457 369.3 285 255
304.8 304.8 76.2 609.6 622.3 482.6 304.8 #673.1 368.3 567.9 457 511.5 445 395
355.6 336.6 76.2 685.8 698.5 533.4 336.6 *723.9 371.9 609.6 609 537.4 551 488
406.4 387.4 76.2 762.0 774.7 596.9 387.4 *774.7 406.7 668.5 609 572.0 685 603
457.2 438.2 101.6 863.6 876.3 635.0 438.2 850.9 489.0 741.7 609 665.2 864 764
508.0 489.0 101.6 914.4 927.1 698.5 489.0 901.7 528.6 819.7 457 704.9 1120 911
558.8 539.8 101.6 1016.0 1028.7 749.3 539.8 *977.9 565.9 914.4 457 742.2 1694 1509
609.6 590.6 101.6 1066.8 1079.5 812.8 590.6 *1066.8 601.7 984.5 457 778.0 1898 1638
660.4 635.0 127.0 1143.0 870.0 635.0 *1130.3 672.8 1060.5 609 872.2 2298 1989
711.2 685.8 127.0 1244.6 927.1 685.8 *1193.8 708.2 1139.4 609 907.3 2840 2480
762.0 736.6 127.0 1295.4 984.3 736.6 *1244.6 749.6 1216.7 609 949.2 3369 2997
863.6 831.9 127.0 1473.2 1111.3 831.9 *1384.3 816.9 1371.6 762 1016.3 4592 4146
914.4 876.3 127.0 1524.0 1168.4 876.3 *1435.1 857.5 1443.5 914 1056.6 5449 4991
1016.0 977.9 190.5 1752.6 1289.1 977.9 *1651.0 1019.6 1651.0 762 1276.4
1066.8 1047.8 190.5 1828.8 1346.2 1047.8 *1689.1 1061.2 1742.4 1067 1318.0
1219.2 1181.1 190.5 2032.0 1511.3 1181.1 *2133 1166 1956
Flanged End L Size
Normally Furnished
Approx. Wt. kg.
Nom
Diam.
mm
Ball
Bore
B mm
Stem
Size
mm
Raised
Face
Length
A mm
Ring
Joint
Length
A mm
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
H
mm
Flange Weld
WeldEndL
Diameter
Handwheel
for Gear
G
mm
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
CAME RON
R E D U C E D O P E N I N G 1 5 0 L B . C L A S S B A L L V A L V E S
76.2 52.3 25.4 203.2 215.9 190.5 79.5 #279.4 100.1 127.0 609 161.0 18 16
101.6 79.5 25.4 228.6 241.3 228.6 103.1 #317.5 130.0 171.5 609 189.0 32 29
152.4 103.1 38.1 393.7 406.4 279.4 152.4 #355.6 150.9 215.9 914 214.1 52 47
203. 152.4 38.1 457.2 469.9 342.9 203.2 457.2 200.9 285.8 914 264.9 131 118
254.0 203.2 50.8 533.4 546.1 406.4 254.0 #546.1 254.0 393.7 457 318.8 191 171
304.8 254.0 50.8 609.6 622.3 482.6 304.8 #596.9 307.8 469.9 457 369.3 351 315
355.6 304.8 76.2 685.8 698.5 533.4 336.6 #673.1 368.3 567.9 457 511.5 524 461
406.4 336.6 76.2 762.0 774.7 596.9 387.4 *723.9 371.9 609.6 609 537.4 624 542
457.2 387.4 76.2 863.6 876.3 635.0 438.2 *774.4 406.7 668.5 609 572.0 803 703
508.0 438.2 101.6 914.4 927.1 698.5 489.0 *850.9 489.0 741.4 609 665.2 950 818
558.8 489.0 101.6 1016.0 1028.7 749.3 539.8 *901.7 528.6 819.7 457 704.9 1247 1004
609.6 539.8 101.6 1066.8 1079.5 812.8 590.6 *977.7 565.9 914.4 457 742.2 1795 1564
660.4 590.6 101.6 1143.0 870.0 635.0 *1066.8 601.7 984.5 457 778.0 2102 1789
711.2 635.0 127.0 1244.6 927.1 685.8 *1130.3 672.8 1060.5 609 872.2 2582 2185
762.0 685.8 127.0 1295.4 984.3 736.6 *1193.8 708.2 1139.4 609 907.3 3119 2689
812.8 736.6 127.0 1371.6 1047.8 831.9 *1244.6 749.6 1216.7 609 949.2 3753 3348
914.4 831.9 127.0 1524. 1168.4 876.3 *1384.3 816.9 1362.5 762 1016.3 4880 4475
1066.8 876.3 127.0 1828.8 1346.2 1047.8 *1435.1 857.5 1443.5 914 1056.6
3 2.06 1 8 8.5 7.5 3.13 #11 3.94 5 24 6.34 40 36
4 3.13 1 9 9.5 9 4.06 #12.5 5.12 6.75 24 7.44 70 63
6 4.06 1.5 10.5 11 11 6 #14 5.94 8.5 36 8.43 115 103
8 6 1.5 18 18.5 13.5 8 18 7.91 11.25 36 10.43 290 261
10 8 2 21 21.5 16 10 #21.5 10 15.5 18 12.55 424 381
12 10 2 24 24.5 19 12 #23.5 12.12 18.5 18 14.54 780 700
14 12 3 27 27.5 21 13.25 #26.5 14.5 22.36 18 20.14 1115 1015
16 13.25 3 30 30.5 23.5 15.25 *28.5 14.64 24 24 21.16 1375 1195
18 15.25 3 34 34.5 25 17.25 *30.5 16.01 26.32 24 22.52 1770 1550
20 17.25 4 36 36.5 27.5 19.25 *33.5 19.25 29.2 24 26.19 2094 1804
22 19.25 4 40 40.5 29.5 21.25 *35.5 20.81 32.27 18 27.75 2758 2214
24 21.25 4 42 42.5 32 23.25 *38.5 22.28 36 18 29.22 3957 3451
26 23.25 4 45 34.25 25 *42 23.69 38.76 18 30.63 4634 3943
28 25 5 49 36.5 27 *44.5 26.49 41.75 24 34.34 5692 4818
30 27 5 51 38.75 29 *47 27.88 44.86 24 35.72 6875 5928
32 29 5 54 41.75 32.75 *49 29.51 47.9 24 37.37 8273 7381
36 32.75 5 60 46 34.5 *54.5 32.16 53.64 30 40.01 10759 9865
42 34.5 5 72 53 41.25 *56.5 33.76 56.83 36 41.6
Note: Venturi opening or other reduced bore valves are available upon request.
2
)
2
)
Flanged End L Size
Nom
Diam.
in.
Ball
Bore
B in.
Stem
Size
in.
Raised
Face
Length
A in.
Ring
Joint
Length
A in.
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Flanged End L Size
Normally Furnished
Approx. Wt. kg.
Nom
Diam.
mm
Ball
Bore
B mm
Stem
Size
mm
Raised
Face
Length
A mm
Ring
Joint
Length
A mm
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm H
mm
A
L
D1
H
G
H
C
D2
E
B
Normally Furnished
Approx. Wt. lb.
H
in.
Flange Weld
Flange Weld
WeldEndL
WeldEndL
Diameter
Handwheel
for Gear
G
in.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
2 2.06 1 8.5 9.125 6.5 2.06 #11 3.94 5 24 6.34 41 34
3 3.13 1 11.125 11.75 8.25 3.13 #12.5 5.12 6.75 24 7.44 80 72
4 4.06 1.5 12 12.625 10 4.06 #14 5.94 8.5 36 8.43 120 108
6 6 1.5 15.875 16.5 12.5 6 18 7.91 11.25 36 10.43 275 247
8 8 2 +19.75 20.375 15 8 #21.5 10 15.5 18 12.55 455 406
10 10 2 22.375 23 17.5 10 #23.5 12.12 18.5 24 14.54 726 648
12 12 3 25.5 26.125 20.5 12 #26.5 14.5 22.36 18 20.14 1100 990
14 13.25 3 30 30.625 23 13.25 *28.5 14.64 24 24 21.16 1460 1314
16 15.25 3 33 33.625 25.5 15.25 *30.5 16.01 26.32 24 22.52 1812 1631
18 17.25 4 36 36.625 28 17.25 *33.5 19.25 29.2 24 26.19 2299 2067
20 19.25 4 39 39.75 30.5 19.25 *35.5 20.81 32.27 18 27.75 2808 2508
22 21.25 4 43 43.875 33 21.25 *38.5 22.28 36 24 29.22 4257 3327
24 23.25 4 45 45.875 36 23.25 *42 23.69 38.76 24 30.63 4770 3610
26 25 5 49 50 38.25 25 *44.5 26.49 41.75 24 34.34 5775 4335
28 27 5 53 54 40.75 27 *47 27.88 44.86 24 35.72 7138 5518
30 29 5 55 56 43 29 *49 29.51 47.9 30 37.37 8467 6607
34 32.75 5 64 65.125 47.5 32.75 *54.5 32.16 53.64 36 40.01 11540 9140
36 34.5 7.5 68 69.125 50 34.5 *56.5 36.8 56.83 24 46.92 13693 11093
40 38.5 7.5 74 48.75 38.5 *65 40.14 65 36 50.25
42 41.25 7.5 76 50.75 41.25 *66.5 41.78 68.6 42 51.89
48 46.5 7.5 86 57.75 46.5 *84 45.9 77
2
)
2
)
Flanged End L Size
Normally Furnished
Approx. Wt. lb.
Nom
Diam.
in.
Ball
Bore
B in.
Stem
Size
in.
Raised
Face
Length
A in.
Ring
Joint
Length
A in.
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in. H
in.
Flange Weld
WeldEndL
50.8 52.3 25.4 215.9 231.8 165.1 52.3 #279.4 100.1 127.0 609 161.0 19 15
76.2 79.5 25.4 282.6 298.5 209.6 79.5 #317.5 130.0 171.5 609 189.0 36 33
101.6 103.1 38.1 304.8 320.7 254.90 103.1 #355.6 150.9 215.9 914 214.1 54 49
152.4 152.4 38.1 403.2 419.1 317.5 152.4 457.2 200.9 285.8 914 264.9 125 112
203.2 203.2 50.8 501.7 517.5 381.0 203.2 #546.1 254.0 393.7 457 318.8 205 183
254.0 254.0 50.8 568.3 584.2 444.5 254.0 #596.9 307.8 469.9 609 369.3 327 292
304.8 304.8 76.2 647.7 663.6 520.7 304.8 #673.1 368.3 567.9 457 511.5 499 449
355.6 336.6 76.2 762.0 777.9 584.2 336.6 *723.9 371.9 609.6 609 537.4 662 596
406.4 387.4 76.2 838.2 854.1 647.7 387.4 *774.7 406.7 668.5 609 572.0 822 740
457.2 438.2 101.6 914.4 930.3 711.2 438.2 *850.9 489.0 741.7 609 665.2 1043 938
508.0 489.0 101.6 990.6 1009.7 774.7 489.0 *901.7 528.6 819.7 457 704.9 1274 1138
558.8 539.8 101.6 1092.2 1114.4 838.2 539.8 *977.9 565.9 914.4 609 742.2 1931 1509
609.6 590.6 101.6 1143.0 1165.2 914.4 590.6 *1066.8 601.7 984.5 609 778.0 2164 1637
660.4 635.0 127.0 1244.6 1270.0 971.6 635.0 *1130.3 672.8 1060.5 609 872.2 2620 1966
711.2 685.8 127.0 1346.2 1371.6 1035.1 685.8 *1193.8 708.2 1139.4 609 907.3 3238 2503
762.0 736.6 127.0 1397.0 1422.4 1092.2 736.6 *1244.6 749.6 1216.7 762 949.2 3840 2997
863.6 831.9 127.0 1625.6 1654.2 1206.5 831.9 *1384.3 816.9 1362.5 914 1016.3 5234 4146
914.4 876.3 190.5 1727.2 1755.8 1270.0 876.3 *1435.1 934.7 1443.5 609 1191.8 6211 5032
1016.0 977.9 190.5 1879.6 1238.3 977.9 *1651.0 1019.6 1651.0 914 1276.4
1066.8 1047.8 190.5 1930.4 1289.1 1047.8 *1689.1 1061.2 1742.4 1067 1318.0
1219.2 1181.1 190.5 2184.4 1466.9 1181.1 *1930.4 1143.0 1955.8
* Short pattern. # Length exceeds specified dimension in API 6D.
+ Prior to 1/1/98 manufactured to 16.5" short pattern length.
Flanged End L Size
Normally Furnished
Approx. Wt. kg.
Nom
Diam.
mm
Ball
Bore
B mm
Stem
Size
mm
Raised
Face
Length
A mm
Ring
Joint
Length
A mm
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm H
mm
Flange Weld
WeldEndL
A
L
D1
H
G
H
C
D2
E
B
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
CAME RON
R E D U C E D O P E N I N G 3 0 0 L B . C L A S S B A L L V A L V E S
3 2.06 1 11.125 11.75 8.25 3.13 *11 3.94 5 24
6.34
65
59
4 3.13 1 12 12.625 10 4.06 #12.5 5.12 6.75 24 7.44 95 85
6 4.06 1.5 15.875 16.5 12.5 6 *14 5.94 8.5 36 8.43 175 157
8 6 1.5 +19.75 20.375 15 8 *18 7.91 11.25 36 10.43 335 301
10 8 2 18 18.625 17.5 10 *21.5 10 15.5 18 12.55 522 467
12 10 2 19.75 20.375 20.5 12 *23.5 12.12 18.5 24 14.54 848 758
14 12 3 30 30.625 23 13.25 *26.5 14.5 22.36 18 20.14 1285 1165
16 13.25 3 33 33.625 25.5 15.25 *28.5 14.64 24 24 21.16 1642 1486
18 15.25 3 36 36.625 28 17.25 *30.5 16.01 26.32 24 22.52 2114 1903
20 17.25 4 39 39.75 30.5 19.25 *33.5 19.25 29.2 24 26.19 2511 2258
22 19.25 4 43 43.875 33 21.25 *35.5 20.81 32.27 18 27.75 3144 2714
24 21.25 4 45 45.875 36 23.25 *38.5 22.28 36 24 29.22 4611 3451
26 23.25 4 49 50 38.25 25 *42 23.69 38.76 24 30.63 5283 3943
28 25 5 53 54 40.75 27 *44.5 26.49 41.75 24 34.34 6488 4868
30 27 5 55 56 43 29 *47 27.88 44.86 24 35.72 7838 5978
32 29 5 60 61.125 45.25 32.75 *49 29.51 47.9 30 37.37 9431 7381
36 32.75 5 68 69.125 50 34.5 *54.5 32.16 53.64 36 40.01 12265 9865
42 34.5 7.5 76 50.75 41.25 *56.5 36.8 56.83 24 46.92
Flanged End L Size
Normally Furnished
Approx. Wt. lb.
Nom
Diam.
in.
Ball
Bore
B in.
Stem
Size
in.
Raised
Face
Length
A in.
Ring
Joint
Length
A in.
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in. H
in.
Flange Weld
WeldEndL
2
)
2
)
76.2 52.3 25.4 282.6 298.5 209.6 79.5 *279.4 100.1 127.0 609 161.0 29 27
101.6 79.5 25.4 304.8 320.7 254.0 103.1 #317.5 130.0 171.5 609 189.0 43 39
152.4 103.1 38.1 403.2 419.1 317.5 152.4 *355.6 150.9 215.9 914 214.1 79 71
203.2 152.4 38.1 501.7 517.5 381.0 203.2 *457.2 200.9 285.8 914 264.9 152 136
254.0 203.2 50.8 568.3 584.2 444.5 254.0 *546,1 254.0 393.7 457 318.8 235 210
304.8 254.0 50.8 647.7 663.6 520.7 304.9 *596.9 307.8 469.9 609 369.3 382 341
355.6 304.8 76.2 762.0 777.9 584.2 336.6 *673.1 368.3 567.9 457 511.5 587 528
406.4 336.6 76.2 838.2 854.1 647.7 387.4 *723.9 371.9 609.6 609 537.4 745 678
457.2 387.4 76.2 914.4 930.3 711.2 438.2 *774.7 406.7 668.5 609 572.0 959 862
508.0 438.2 101.6 990.6 1009.7 774.7 489.0 *850.9 489.0 741.7 609 665.2 1138 1024
558.8 489.0 101.6 1092.2 1114.4 838.2 539.8 *901.7 528.6 819.7 457 704.9 1426 1231
609.6 539.8 101.6 1143.0 1165.2 914.4 590.6 *977.9 565.9 914.4 609 742.2 2091 1565
660.4 590.6 101.6 1244.6 1270.0 971.6 635.0 *1066.8 601.7 984.5 609 778.0 2396 1789
711.2 635.0 127.0 1346.2 1371.6 1035.1 685.8 *1130.3 672.8 1060.5 609 872.2 2943 2208
762.0 685.8 127.0 1397.0 1422.4 1092.2 736.6 *1193.8 708.2 1139.4 609 907.3 3555 2612
812.8 736.6 127.0 1524.0 1552.6 1149.4 831.9 *1244.6 749.6 1216.7 762 949.2 4278 3348
914.4 831.9 127.0 1727.2 1755.8 1270.0 867.3 *1384.3 816.9 1362.5 914 1016.3 5563 4475
1066.8 876.3 190.5 1930.4 1289.1 1047.8 *1435.1 934.7 1443.5 609 1191.8
+ Prior to 1/1/98 manufactured to 16.5" short pattern length.
Flanged End L Size
Normally Furnished
Approx. Wt. kg.
Nom
Diam.
mm
Ball
Bore
B mm
Stem
Size
mm
Raised
Face
Length
A mm
Ring
Joint
Length
A mm
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm H
mm
Flange Weld
WeldEndL
A
L
D1
H
G
H
C
D2
E
B
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
2 2.06
3 3.13
4 4.06 1.5 16 16.125 10 4.06 *14 5.94 8.5 36 8.43 140 126
6 6 1.5 19.5 19.625 12.5 6 *18 7.91 11.25 36 10.43 305 274
8 8 2 23.5 23.625 15 8 *21.5 10 15.5 18 12.55 530 473
10 10 2 26.5 26.625 17.5 10 *23.5 12.12 18.5 24 14.54 910 819
12 12 3 30 30.125 20.5 12 *26.5 14.5 22.36 18 20.14 1390 1240
14 13.25 3 32.5 32.625 23 13.25 *28.5 14.64 24 18 21.16 1774 1576
16 15.25 4 35.5 35.625 25.5 15.25 *30.5 17.84 26.32 18 24.78 2282 2040
18 17.25 4 38.5 38.625 28 17.25 *33.5 19.25 29.2 24 26.19 2918 2626
20 19.25 5 41.5 41.75 30.5 19.25 *35.5 22.11 32.27 24 30 3370 3028
22 21.25 5 45 45.375 33 21.25 38.5 23.63 36 24 31.53 5108 4332
24 23.25 5 48.5 48.875 36 23.25 *42 25.05 38.76 24 32.95 5963 5278
26 25 5 51.5 52 38.25 25 *44.5 26.49 41.75 24 34.34 7219 5872
28 27 5 55 55.5 40.75 27 *47 27.88 44.86 30 35.72 8923 7464
30 29 5 60 60.5 43 29 *49 29.51 47.9 36 37.37 10584 8657
34 32.75 7.5 70 70.625 47.5 32.75 *54.5 35.19 53.64 30 45.31 14425 12712
36 34.5 7.5 74 74.625 50 34.5 *56.5 36.8 56.83 30 46.92 18116 16700
40 38.5 7.5 78 50 38.5 *65 40.14 65 42 50.25 25100 23800
42 41.25 7.5 81 52 41.25 *66.5 41.78 68.6 42 51.89 27900 26200
48 46.5 9 91 59.5 46.5 *84 47.98 77
Use 600 lb. Class Valves
2
)
2
)
Flanged End L Size
Normally Furnished
Approx. Wt. lb.
Nom
Diam.
in.
Ball
Bore
B in.
Stem
Size
in.
Raised
Face
Length
A in.
Ring
Joint
Length
A in.
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in. H
in.
Flange Weld
WeldEndL
A
L
D1
H
G
H
C
D2
E
B
50.8 52.3
76.2 79.5
101.6 103.1 38.1 406.4 409.6 254.0 103.1 *355.6 150.9 215.9 914 214.1 64 57
152.4 152.4 38.1 495.3 498.5 317.5 152.4 *457.2 200.9 285.8 914 264.9 138 124
203.2 203.2 50.8 596.9 600.1 381.0 203.2 *546.1 254.0 393.7 457 318.8 240 215
254.0 254.0 50.8 673.1 676.3 444.5 254.0 *596.9 307.8 469.9 609 369.3 413 371
304.8 304.8 76.2 762.0 765.2 520.7 304.8 *673.1 368.3 567.9 457 511.5 631 562
355.6 336.6 76.2 825.5 828.7 584.2 336.6 *723.9 371.9 609.6 457 537.4 804 714
406.4 387.4 101.6 901.7 904.9 647.7 387.4 *774.7 453.1 668.5 457 629.4 1035 925
457.2 438.2 101.6 977.9 981.1 711.2 438.2 *850.9 489.0 741.7 609 665.2 1324 1191
508.0 489.0 127.0 1054.1 1060.5 774.7 489.0 *901.7 561.6 819.7 609 762.0 1529 1374
558.8 539.8 127.0 1143.0 1152.5 838.2 539.8 *977.9 600.2 914.4 609 800.9 2317 1955
609.6 590.6 127.0 1231.9 1241.4 914.4 590.6 *1066.8 636.3 984.5 609 836.9 2605 2394
660.4 635.0 127.0 1308.1 1320.8 971.6 635.0 *1130.3 672.8 1060.5 609 872.2 3275 2664
711.2 685.8 127.0 1397.0 1409.7 1035.1 685.8 *1193.8 708.2 1139.4 762 907.3 4047 3386
762.0 736.6 127.0 1524.0 1536.7 1092.2 736.6 *1244.6 749.6 1216.7 914 949.2 4801 3927
863.6 831.9 190.5 1778.0 1793.9 1206.5 831.9 *1384.3 893.8 1362.5 762 1150.9 6543 5766
914.4 876.3 190.5 1879.6 1895.5 1270.0 876.3 *1435.1 934.7 1443.5 762 1191.8 8218 7575
1016.0 977.9 190.5 1981.2 1270.0 977.9 *1651.0 1019.6 1651.0 1067 1276.4 11385 10796
1066.9 1047.8 190.5 2057. 1320.8 1047.8 *1689.1 1061.2 1742.4 1067 1318.0 12655 11884
1219.2 1181.1 228.6 2311.4 1511.3 1181.3 *2133 1219 1956
Flanged End L Size
Normally Furnished
Approx. Wt. kg.
Nom
Diam.
mm
Ball
Bore
B mm
Stem
Size
mm
Raised
Face
Length
A mm
Ring
Joint
Length
A mm
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm H
mm
Flange Weld
WeldEndL
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
CAME RON R E D U C E D O P E N I N G 4 0 0 L B . C L A S S B A L L V A L V E S
2
)
2
)
3 2.06
4 3.13 1 16 16.125 10 4.06 *12.5 5.12 6.75 24 7.44 110 99
6 4.06 1.5 19.5 19.625 12.5 6 *14 5.94 8.5 36 8.43 195 175
8 6 1.5 23.5 23.625 15 8 *18 7.91 11.25 18 10.43 430 387
10 8 2 26.5 26.625 17.5 10 *21.5 10 15.5 18 12.55 635 567
12 10 2 30 30.125 20.5 12 *23.5 12.12 18.5 24 14.54 1110 999
14 12 3 32.5 32.625 23 13.25 *26.5 14.5 22.36 18 20.14 1620 1458
16 13.25 3 35.5 35.625 25.25 15.25 *28.5 14.64 24 18 21.16 2034 1828
18 15.25 4 38.5 38.625 28 17.25 *30.5 17.84 26.32 18 24.78 2592 2351
20 17.25 4 41.5 41.75 30.5 19.25 *33.5 19.25 29.2 24 26.19 3348 3013
22 19.25 5 45 45.375 33 21.25 *35.5 22.11 32.27 24 30 3772 3322
24 21.25 5 48.5 48.875 36 23.25 *38.5 23.63 36 24 31.53 5413 4457
26 23.25 5 51.5 52 38.25 25 *42 25.05 38.76 24 32.95 6604 5413
28 25 5 55 55.5 40.75 27 *44.5 26.49 41.75 24 34.34 8110 6561
30 27 5 60 60.5 43 29 *47 27.88 44.86 30 35.72 9798 8184
32 29 5 65 65.625 45.25 32.75 *49 29.51 47.9 36 37.37 11789 9694
36 32.75 7.5 74 74.625 50 34.5 *54.5 35.19 53.64 30 45.31 15331 13517
42 34.5 7.5 81 52 41.25 *56.5 36.8 56.83 30 46.92
Flanged End L Size
Normally Furnished
Approx. Wt. lb.
Nom
Diam.
in.
Ball
Bore
B in.
Stem
Size
in.
Raised
Face
Length
A in.
Ring
Joint
Length
A in.
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in. H
in.
Flange Weld
WeldEndL
A
L
D1
H
G
H
C
D2
E
B
76.2 52.3
101.6 25.4 406.7 409.6 254.0 103.1 *317.5 130.0 171.5 609 189.0 50 45
152.4 103.1 38.1 495.3 498.5 317.5 152.4 *355.6 150.9 215.9 914 214.4 88 79
203.2 152.4 38.1 596.9 600.1 381.0 203.2 *457.2 200.9 285.8 457 264.9 195 176
254.0 203.2 50.8 673.1 676.3 444.5 254.0 *546.1 254.0 393.7 457 318.8 288 257
304.8 254.0 50.8 762.0 765.2 520.7 304.8 *596.9 307.8 469.9 609 369.3 503 453
355.6 304.8 76.2 825.5 828.7 584.2 336.6 *673.1 368.3 567.9 457 511.5 735
406.4 336.6 76.2 901.7 904.9 647.7 387.4 *723.9 371.9 609.6 457 537.4 923 829
457.2 387.4 101.6 977.9 981.1 711.2 438.2 *774.7 453.1 668.5 457 629.4 1175 1066
508.0 438.2 101.6 1054.1 1060.5 774.7 489.0 *850.9 489.0 741.7 609 665.2 1519 1367
558.8 489.0 127.0 1143.0 1152.5 838.2 539.8 *901.7 561.6 819.7 609 762.0 1711 1507
609.6 539.8 127.0 1231.9 1241.4 914.4 590.6 *977.9 600.2 914.4 609 800.9 2455 2022
660.4 590.6 127.0 1308.1 1320.8 971.6 635.0 *1066.8 636.3 984.5 609 836.9 2942 2455
711.2 635.0 127.0 1397.0 1409.7 1035.1 685.8 *1130.3 672.8 1060.5 609 872.2 3679 2976
762.0 685.8 127.0 1524.0 1536.7 1092.2 736.6 *1193.8 708.2 1139.4 762 907.3 4444 3712
812.8 736.6 127.0 1651.0 1666.9 1149.4 831.9 *1244.6 749.6 1216.7 914 949.2 5348 4397
914.4 831.9 190.5 1879.6 1895.5 1270.0 876.3 *1384.3 893.8 1362.5 762 1150.9 6954 6131
1066.8 876.3 190.5 2057.4 1320.8 1047.8 *1435.1 934.7 1443.5 762 1191.8
Flanged End L
Normally Furnished
Approx. Wt. kg.
Nom
Diam.
mm
Ball
Bore
B mm
Stem
Size
mm
Raised
Face
Length
A mm
Ring
Joint
Length
A mm
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm H
mm
Flange Weld
WeldEndL
* Short pattern.
79.5
Size
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
2 2.06 1 11.5 11.625 6.5 2.06 *11 3.94 5 24 6.34 44 40
3 3.13 1 14 14.125 8.25 3.13 *12.5 5.12 6.75 24 7.44 85 78
4 4.06 1.5 17 17.125 10.75 4.06 *14 5.94 8.5 36 8.43 165 148
6 6 1.5 22 22.125 14 6 *18 7.91 11.25 36 10.43 445 397
8 8 2 26 26.125 16.5 8 *21.5 10 15.5 24 12.55 670 603
10 10 2 31 31.125 20 10 *23.5 12.12 18.5 30 14.54 1050 945
12 12 3 33 33.125 22 12 *26.5 14.5 22.36 18 20.14 1510 1359
14 13.25 3 35 35.125 23.75 13.25 *28.5 14.64 24 24 21.16 2030 1825
16 15.25 4 39 39.125 27 15.25 *30.5 17.84 26.32 18 24.78 2483 2232
18 17.25 4 43 43.125 29.25 17.25 *33.5 19.25 29.2 24 26.19 2985 2685
20 19.25 5 47 47.25 32 19.25 *35.5 22.11 32.27 24 30 4208 3628
22 21.25 5 51 51.375 34.25 21.25 *38.5 23.63 36 24 31.53 5772 4332
24 23.25 5 55 55.375 37 23.25 *42 25.05 38.76 30 32.95 6938 5278
26 25 5 57 57.5 40 25 *44.5 26.49 41.75 36 34.34 8013 5963
28 27 7.5 61 61.5 42.25 27 *47 30.87 44.86 30 40.99 9905 7555
30 29 7.5 65 65.5 44.5 29 *49 32.53 47.9 30 42.65 11748 8748
34 32.75 7.5 76 76.625 49 32.75 *54.5 35.19 53.64 42 45.31 16012 12712
36 34.5 7.5 82 82.625 51.75 34.5 *56.5 36.8 56.83 42 46.92 19998 16700
40 38.5 9 80 52 38.5 *65 42.02 65 42 55.425 26900 23800
42 41.25 9 83 55.25 41.25 *66.5 43.66 68.6 42 57.06 29920 26200
48 46.5 11 94 62.75 46.5 *84 51.18 77.33 --
2
)
2
)
Flanged End L Size
Normally Furnished
Approx. Wt. lb.
Nom
Diam.
in.
Ball
Bore
B in.
Stem
Size
in.
Raised
Face
Length
A in.
Ring
Joint
Length
A in.
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in. H
in.
Flange Weld
WeldEndL
50.8 52.3 25.4 292.1 295.3 165.1 52.3 *279.4 100.1 127.0 609 161.0 20 18
76.2 79.5 25.4 355.6 358.8 209.6 79.5 *317.5 130.0 171.5 609 189.0 39 35
101.6 103.1 38.1 431.8 435.0 273.1 103.1 *355.6 150.9 215.9 914 214.1 75 67
152.4 152.4 38.1 558.8 562.0 355.6 152.4 *457.2 200.9 285.8 914 264.9 202 180
203.2 203.2 50.8 660.4 663.6 419.1 203.2 *546.1 254.0 393.7 609 318.8 304 274
254.0 254.0 50.8 787.4 790.6 508.0 254.0 *596.9 307.8 469.9 762 369.3 476 429
304.8 304.8 76.2 838.2 841.4 558.8 304.8 *673.1 368.3 567.9 457 511.5 685 616
355.6 336.6 76.2 889.0 892.2 603.3 336.6 *723.9 371.9 609.6 609 537.4 921 827
406.4 387.4 101.6 990.6 993.8 685.8 387.4 *774.7 453.1 668.5 457 629.4 1126 1012
457.2 438.2 101.6 1092.2 1095.4 743.0 438.2 *850.9 489.0 741.7 609 665.2 1354 1218
508.0 489.0 127.0 1193.8 1200.2 812.8 489.0 *901.7 561.6 819.7 609 762.0 1909 1646
558.8 539.8 127.0 1295.4 1304.9 870.0 539.8 *977.9 600.2 914.4 609 800.9 2618 1965
609.6 590.6 127.0 1397.0 1406.5 939.8 590.6 *1066.8 636.3 984.5 762 836.9 3147 2394
660.4 635.0 127.0 1447.8 1460.5 1016.0 635.0 *1130.3 672.8 1060.5 914 872.2 3635 2705
711.2 685.8 190.5 1549.4 1562.1 1073.2 685.8 *1193.8 784.1 1139.4 762 1041.1 4493 3427
762.0 736.6 190.5 1651.0 1663.7 1130.3 736.6 *1244.6 826.3 1216.7 762 1083.3 5329 3968
863.6 831.9 190.5 1930.4 1946.3 1244.6 831.9 *1384.3 893.8 1371.6 1067 1150.9 7263 5766
914.4 876.3 190.5 2082.8 2098 1314.5 876.3 *1435.1 934.7 1443.5 1067 1191.8 9063 7575
1016.0 977.9 228.6 2032.0 1320.8 977.9 *1651.0 1067.3 1651.0 1067 1407.8 12202 10796
1066.8 1047.8 228.6 2108.2 1403.4 1047.8 *1689.1 1109.0 1742.4 1067 1449.5 13572 11884
1219.2 1181.1 279.4 2387.6 1593.9 1181.1 *2133 1300 1964.2
Flanged End L Size
Normally Furnished
Approx. Wt. kg.
Nom
Diam.
mm
Ball
Bore
B mm
Stem
Size
mm
Raised
Face
Length
A mm
Ring
Joint
Length
A mm
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm H
mm
Flange Weld
WeldEndL
A
L
D1
H
G
H
C
D2
E
B
* Short pattern.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
3 2.06 1 14 14.125 8.25 3.13 *11 3.94 5 24 6.34 80 72
4 3.13 1 17 17.125 10.75 4.06 *12.5 5.12 6.75 24 7.44 140 126
6 4.06 1.5 22 22.125 14 6 *14 5.94 8.5 36 8.43 230 207
8 6 1.5 26 26.125 16.5 8 *18 7.91 11.25 36 10.43 570 541
10 8 2 31 31.125 20 10 *21.5 10 15.5 24 12.55 775 697
12 10 2 33 33.125 22 12 *23.5 12.12 18.5 30 14.54 1353 1217
14 12 3 35 35.125 23.75 13.25 *26.5 14.5 22.36 18 20.14 1873 1684
16 13.25 3 39 39.125 27 15.25 *28.5 14.64 24 24 21.16 2300 2068
18 15.25 4 43 43.125 29.25 17.25 *30.5 17.84 26.32 18 24.78 2634 2378
20 17.25 4 47 47.25 32 19.25 *33.5 19.25 29.2 24 26.19 4110 3675
22 19.25 5 51 51.375 34.25 21.25 *35.5 22.11 32.27 24 30 4462 4122
24 21.25 5 55 55.375 37 23.25 *38.5 23.63 36 24 31.53 6117 4457
26 23.25 5 57 57.5 40 25 *42 25.05 38.76 30 32.95 7463 5413
28 25 5 61 61.5 42.25 27 *44.5 26.49 41.75 36 34.34 9002 6652
30 27 7.5 65 65.5 44.5 29 *47 30.87 44.86 30 40.99 10875 8275
32 29 7.5 70 70.625 47 32.75 *49 32.53 47.9 30 42.65 13085 9785
36 32.75 7.5 82 82.625 51.75 34.5 *54.5 35.19 53.64 42 45.31 17017 13517
42 34.5 7.5 83 55.25 41.25 *56.5 36.8 56.83 42 46.92
2
)
2
)
Flanged End L Size
Normally Furnished
Approx. Wt. lb.
Nom
Diam.
in.
Ball
Bore
B in.
Stem
Size
in.
Raised
Face
Length
A in.
Ring
Joint
Length
A in.
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in. H
in.
Flange Weld
WeldEndL
76.2 52.3 25.4 355.6 358.8 209.6 79.5 *279.4 100.1 127.0 609 161.0 36 33
101.6 79.5 25.4 431.8 435.0 273.1 103.1 *317.5 130.0 171.5 609 189.0 64 57
152.4 103.2 38.1 558.8 562.0 355.6 152.4 *355.6 150.9 215.9 914 214.1 104 94
203.2 152.4 38.1 660.4 663.6 419.1 203.2 *457.2 200.9 285.8 914 264.9 259 245
254.0 203.2 50.8 787.4 790.6 508.0 254.0 *546.1 254.0 393.7 609 318.8 352 316
304.8 254.0 50.8 838.2 841.4 558.8 304.8 *596.9 307.8 469.9 762 369.3 614 552
355.6 304.8 76.2 889.0 892.2 603.3 336.6 *673.1 368.3 567.9 457 511.5 850 764
406.4 336.6 76.2 990.6 993.8 685.8 387.4 *723.9 371.9 609.6 609 537.4 1043 938
457.2 387.4 101.6 1092.2 1095.4 743.0 438.2 *774.7 453.1 668.5 457 629.4 1195 1079
508.0 438.2 101.6 1193.8 1200.2 812.8 489.0 *850.9 489.0 741.7 609 665.2 1864 1667
558.8 489.0 127.0 1295.4 1304.9 870.0 539.8 *901.7 561.6 819.7 609 762.0 2024 1870
609.6 539.8 127.0 1397.0 1406.5 939.8 590.6 *977.7 600.2 914.4 609 800.9 2775 2021
660.4 590.6 127.0 1447.8 1460.5 1016.0 635.0 *1066.8 636.3 984.5 762 836.9 3385 2455
711.2 635.0 127.0 1549.4 1562.1 1073.2 685.8 *1130.3 672.8 1060.5 914 872.2 4083 3017
762.0 685.8 190.5 1651.0 1663.7 1130.3 736.6 *1193.8 784.1 1139.4 762 1041.1 4933 3754
812.8 736.6 190.5 1778.0 1793.9 1193.8 831.9 *1244.6 826.3 1216.7 762 1083.3 5935 4438
914.4 831.9 190.5 2082.8 2098.7 1314.5 876.3 *1384.3 893.8 1362.5 1067 1150.9 7719 6131
1066.8 876.3 190.5 2108.2 1403.4 1047.8 *1435.1 934.7 1443.5 1067 1191.8
Flanged End L Size
Normally Furnished
Approx. Wt. kg.
Nom
Diam.
mm
Ball
Bore
B mm
Stem
Size
mm
Raised
Face
Length
A mm
Ring
Joint
Length
A mm
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm H
mm
Flange Weld
WeldEndL
A
L
D1
H
G
H
C
D2
E
B
* Short pattern.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
2.06 2
3 1.5 15 15.125 9.5 3.13 *13.5 4.88 7 36 7.44 130 117
4 4.06 2 18 18.125 11.5 4.06 *15 6.77 9.25 18 9.76 255 225
6 6 2 24 24.125 15 6 *20 8.39 12.5 24 10.86 675 607
8 8 2 29 29.125 18.5 8 *23.5 10 15.5 30 12.55 1340 1206
10 10 3 33 33.125 21.5 10 *25.5 12.88 18.5 18 18.49 2077 1867
12 12 3 38 38.125 24 12 *29.5 14.5 22.36 24 20.14 3002 2699
14 12.75 5 40.5 40.875 25.25 12.75 *31.5 17.4 24.5 24 25.3 4106 3695
16 14.75 5 44.5 44.875 27.75 14.75 *33.5 19.02 27.25 24 26.92 5112 4592
18 16.75 5 48 48.5 31 16.75 *36.5 20.62 30.07 24 28.51 6600 5940
20 18.625 7.5 52 52.5 33.75 18.625 *38.5 24.22 33.88 24 35.23 8620 7750
24 22.5 7.5 61 61.75 41 22.5 *45 28.07 39.95 30 38.18 12400 11200
30 29 7.5 75 75.875 48.5 29 *52 32.53 49.88 42 42.65 22000 19800
36 34.5 9 90 91.125 57.5 34.5 *59.5 38.64 58.25 52.03 35000 31400
2
)
2
)
Flanged End L
Size
Normally Furnished
Approx. Wt. lb.
Nom
Diam.
in.
Ball
Bore
B in.
Stem
Size
in.
Raised
Face
Length
A in.
Ring
Joint
Length
A in.
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in. H
in.
Flange Weld
WeldEndL
50.8 52.3
76.2 79.5 38.1 381.0 384.2 241.3 79.5 *342.9 124.0 177.8 914 189.0 59 53
101.6 103.1 50.8 457.2 460.4 292.1 103.1 *381.0 172.0 235.0 457 247.9 116 102
152.4 152.4 50.8 609.6 612.8 381.0 152.4 *508.0 213.1 317.5 609 275.8 306 275
203.2 203.2 50.8 736.6 739.8 469.9 203.2 *596.9 254.0 393.7 762 318.8 608 547
254.0 254.0 76.2 838.2 841.4 546.1 254.0 *647.7 327.2 469.9 457 469.6 942 847
304.8 304.8 76.2 965.2 968.4 609.6 304.8 *749.3 368.3 567.9 609 511.5 1362 1224
355.6 323.9 127.0 1028.7 1038.2 641.4 323.9 *800.1 442.0 622.3 609 642.6 1863 1676
406.4 374.7 127.0 1130.3 1139.8 704.9 347.7 *850.9 483.1 692.2 609 683.8 2319 2083
457.2 425.5 127.0 1219.2 1231.9 787.4 425.5 *927.1 523.7 763.8 609 724.2 2994 2694
609.6 571.5 190.5 1549.4 1568.5 1041.4 571.5 *1143.0 713.0 1014.7 762 969.8 5625 5080
508.0 473.1 190.5 1320.8 1333.5 857.3 473.1 *977.9 615.2 860.6 609 894.8 3910 3515
762.0 736.6 190.5 1905.0 1927.2 1231.9 736.6 *1320.8 826.3 1267.0 1067 1083.3 9979 8981
914.4 876.3 228.6 2286.0 2314.6 1460.5 876.3 *1511.3 981.5 1479.6 1321.4 15876 14243
Flanged End L Size
Normally Furnished
Approx. Wt. kg.
Nom
Diam.
mm
Ball
Bore
B mm
Stem
Size
mm
Raised
Face
Length
A mm
Ring
Joint
Length
A mm
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm
H
mm
Flange Weld
WeldEndL
A
L
D1
H
G
H
C
D2
E
B
* Short pattern.
3.13
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
3 2.06 1 15 15.125 9.5 3.13 *11 3.94 5 24 6.34 105 94
4 3.13 1.5 18 18.125 11.5 4.06 *13.5 4.88 7 36 7.44 197 177
6 4.06 2 24 24.125 15 6 *15 6.77 9.25 18 9.76 345 297
8 6 2 29 29.125 18.5 8 *20 8.39 12.5 24 10.86 825 742
10 8 2 33 33.125 21.5 10 *23.5 10 15.5 30 12.55 1590 1431
12 10 3 38 38.125 24 12 *25.5 12.88 18.5 18 18.49 2307 2074
14 12 3 40.5 40.875 25.25 12.75 *29.5 14.5 22.36 24 20.14 2893 2801
16 12.75 5 44.5 44.875 27.75 14.75 *31.5 17.4 24.5 24 25.3 4396 3956
76.2 52.3 25.4 381.0 384.2 241.3 79.5 *279.4 100.1 127.0 609 161.0 48 43
101.6 79.5 38.1 457.2 460.4 292.1 103.1 *342.9 124.0 177.8 914 189.0 89 80
152.4 103.1 50.8 609.6 612.8 381.0 152.4 *381.0 172.0 235.0 457 247.9 156 135
203.2 152.4 50.8 736.6 739.8 469.9 203.2 *508.0 213.1 317.5 609 275.8 374 337
254.0 203.2 50.8 838.2 841.4 546.1 254.0 *596.9 254.0 393.7 762 318.8 721 649
304.8 254.0 76.2 965.2 968.4 609.6 304.8 *647.7 327.2 469.9 457 469.6 1046 940
355.6 304.8 76.2 1028.7 1038.2 641.4 323.9 *749.3 368.3 567.9 609 511.5 1312 1270
406.4 323.9 127.0 1130.3 1139.8 704.9 374.7 *800.1 442.0 622.3 609 642.6 1994 1794
Reduced Opening
Reduced Opening
2
)
2
)
Flanged End L Size
Normally Furnished
Approx. Wt. lb.
Nom
Diam.
in.
Ball
Bore
B in.
Stem
Size
in.
Raised
Face
Length
A in.
Ring
Joint
Length
A in.
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in. H
in.
Flanged End L Size
Normally Furnished
Approx. Wt. kg.
Nom
Diam.
mm
Ball
Bore
B mm
Stem
Size
mm
Raised
Face
Length
A mm
Ring
Joint
Length
A mm
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm H
mm
Flange Weld
Flange Weld
WeldEndL
WeldEndL
A
L
D1
H
G
H
C
D2
E
B
* Short pattern.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
CAME RON F U L L O P E N I N G 1 5 0 0 L B . C L A S S B A L L V A L V E S
2
)
5575 psi TEST (392 kg/cm
2
)
A
L
D1
H
G
H
C
D2
E
B
* Short pattern.
2 2.06 1 14.5 14.625 8.5 2.06 *11 3.94 5 24 6.34 95 85
3 3.13 1.5 18.5 18.625 10.5 3.13 *13.5 4.88 7 36 7.44 189 169
4 4.06 2 21.5 21.625 12.25 4.06 *15 6.77 9.25 18 9.76 311 276
6 6 2 27.75 28 15.5 6 *20 8.39 12.5 30 10.86 805 724
8 8 3 32.75 33.125 19 8 *23.5 10.95 16.38 18 16.89 1637 1473
10 10 4 39 39.375 23 10 *25.5 15.15 19.5 18 19.96 2435 2063
12 12 4 44.5 45.125 26.5 12 *29.5 17.31 23.38 24 21.8 3753 3103
14 12.75 5 49.5 50.25 29.5 12.75 *31.5 17.4 26 24 25.3 5208 4102
16 14.75 5 54.5 55.375 32.5 14.75 *33.5 19.02 29.25 30 26.92 6750 5273
18 16.75 7.5 60.5 61.375 36 16.75 *36.5 22.69 31.57 30 33.71 9050 7100
20 18.625 7.5 65.5 66.375 38.75 18.625 *38.5 24.22 34.72 30 35.23 12620 9900
24 22.5 7.5 76.5 77.625 46 22.5 *45 28.07 42.16 48 38.18 18100 14200
50.8 52.3 25.4 368.3 371.5 215.9 52.3 *279.4 100.1 127.0 609 161.0 43 39
76.2 79.5 38.1 469.9 473.1 266.7 79.5 *342.9 124.0 177.8 914 189.0 66 77
101.6 103.1 50.8 546.1 549.3 311.2 103.1 *381.0 172.0 235.0 457 247.9 141 125
152.4 152.4 50.8 704.9 711.2 393.7 152.4 *508.0 213.1 317.5 762 275.8 365 328
203.2 203.2 76.2 831.9 841.4 482.6 203.2 *596.9 278.1 416.1 457 429.0 743 668
254.0 254.0 101.6 990.6 1000.1 584.2 254.0 *647.7 384.8 495.3 457 507.0 1105 936
304.8 304.8 101.6 1130.3 1146.2 673.1 304.8 *749.3 439.7 593.9 609 553.7 1702 1408
355.6 323.9 127.0 1257.3 1276.4 749.3 323.9 *800.1 442.0 660.4 609 642.6 2362 1861
406.4 374.7 127.0 1384.3 1406.5 825.5 374.7 *850.9 483.1 743.0 762 683.8 3062 2392
457.2 425.5 190.5 1536.7 1558.9 914.4 425.5 *927.1 576.3 801.9 762 856.2 4105 3220
508.0 473.1 190.5 1663.7 1685.9 984.3 473.1 *977.9 615.2 881.9 762 894.8 5724 4491
609.6 571.5 190.5 1943.1 1971.7 1168.4 571.5 *1143.0 713.0 1070.9 1219 969.8 8210 6441
Flanged End L Size
Normally Furnished
Approx. Wt. lb.
Nom
Diam.
in.
Ball
Bore
B in.
Stem
Size
in.
Raised
Face
Length
A in.
Ring
Joint
Length
A in.
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in. H
in.
Flanged End L Size
Normally Furnished
Approx. Wt. kg.
Nom
Diam.
mm
Ball
Bore
B mm
Stem
Size
mm
Raised
Face
Length
A mm
Ring
Joint
Length
A mm
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm H
mm
Flange Weld
Flange Weld
WeldEndL
WeldEndL
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
(p81)
P R O D U C T S P E C I F I C A T I O N S
3 2.06 1 18.5 18.625 10.5 3.13 *11 3.94 5 24 6.34 130 117
4 3.13 1.5 21.5 21.625 12.25 4.06 *13.5 4.88 7 36 7.44 230 207
6 4.06 2 27.75 28 15.5 6 *15 6.77 9.25 18 9.76 450 401
8 6 2 32.75 33.125 19 8 *20 8.39 12.5 30 10.86 1100 990
10 8 3 39 39.375 23 10 *23.5 10.95 16.38 18 16.89 1990 1701
12 10 4 44.5 45.125 26.5 12 *25.5 15.15 19.5 18 19.96 2972 2530
14 12 4 49.5 50.25 29.5 12.75 *29.5 17.31 23.38 24 21.8 3996 3347
16 12.75 5 54.5 55.375 32.5 14.75 *31.5 17.4 26 24 25.3 5875 4382
76.2 52.3 25.4 469.9 473.1 266.7 79.5 *279.4 100.1 127.0 609 161.0 59 53
101.6 79.5 38.1 546.1 549.3 311.2 103.1 *342.9 124.0 177.8 914 189.0 104 94
152.4 103.1 50.8 704.9 711.2 393.7 152.4 *381.0 172.0 235.0 457 247.9 204 182
203.2 152.4 50.8 831.9 841.4 482.6 203.2 *508.0 213.1 317.5 762 275.8 499 448
254.0 203.2 76.2 990.6 1000.1 584.2 254.0 *596.9 278.1 416.1 457 429.0 903 772
304.8 254.0 101.6 1130.3 1146.2 673.1 304.8 *647.7 384.8 495.3 457 507.0 1348 1148
355.6 304.8 101.6 1257.3 1276.4 749.3 323.9 *749.3 439.7 593.9 609 553.7 1813 1518
406.4 323.9 127.0 1384.3 1406.5 825.5 374.7 *800.1 442.0 660.4 609 642.6 2665 1988
Reduced Opening
Reduced Opening
2
)
5575 psi TEST (392 kg/cm
2
)
Flanged End L Size
Normally Furnished
Approx. Wt. lb.
Nom
Diam.
in.
Ball
Bore
B in.
Stem
Size
in.
Raised
Face
Length
A in.
Ring
Joint
Length
A in.
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in. H
in.
Flanged End L Size
Normally Furnished
Approx. Wt. kg.
Nom
Diam.
mm
Ball
Bore
B mm
Stem
Size
mm
Raised
Face
Length
A mm
Ring
Joint
Length
A mm
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm H
mm
Flange Weld
Flange Weld
WeldEndL
WeldEndL
A
L
D1
H
G
H
C
D2
E
B
* Short pattern.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
CAME RON F U L L A N D RE D U C E D OP E N I N G 2 50 0 L B . CL A S S BA L L VA LV E S
2
2.06 1 17.75 17.875 9.25 2.06 *15 4.53 5.43 24
7.25
114 94
3 3.13 1.5 22.75 23 12 3.13 *18 5.67 7.5 36 8.94 236 187
4 4.06 2 26.5 26.875 14 4.06 *20 7.24 9.75 24 11.70 471 382
6 6 3 36 36.5 19 6 *24 7.76 13.5 24 13.13 943 737
8 6 3 40.5 40.875 21.75 7.125 *24 7.76 13.5 24 13.13 1297 1017
10 8.875 4 50 50.875 26.5 8.875 *33 14.84 20.87 24 20.00 2922 2166
12 10.5 5 56 56.875 30 10.5 *36 16.615 24.5 30 24.75 4506 3258
8 7.125 4 40.5 40.875 21.75 7.125 *28 12.84 18.11 24 17.88 2094 1676
3 2.06 1 22.75 23 12 3.13 *15 4.53 5.43 24 7.25
156 129
4 3.13 1.5 26.5 26.875 14 4.06 *18 5.67 7.5 36 8.94 286 247
6 4.06 2 36 36.5 19 6 *20 7.24 9.75 24 11.7
638 513
10 7.13 4 50 50.875 26.5 8.875 *28 12.84 18.11 24 17.88
2518
1916
12 8.875 4 56 56.875 30 10.5 *33 14.875 20.87 24 20 3566 2657
Reduced Opening
50.8 52.3 25.4 450.9 454.0 235.0 52.3 *381.0 115 138 609 184.2 52 43
76.2 79.5 38.1 577.9 584.2 304.9 79.5 *457.2 144 190.5 914 227.1 107 85
101.6 103.1 50.8 673.1 682.6 355.6 103.1 *508.0 184 247.7 609 297.2 214 173
152.4 152.4 76.2 914.4 927.1 482.6 152.4 *609.6 248 342.9 609 333.5 428 334
203.2 181.0 101.6 1028.7 1038.2 552.5 181.0 *711.2 326 460 609 454.0 950 760
254.0 225.4 101.6 1270.0 1292.2 673.1 225.4 *838.2 377.8 530 609 508.0 1325 983
304.8 266.7 127.0 1422.4 1444.6 762.0 266.7 *914.4 423 622.3 762 628.7 2044 1478
76.2 52.3 25.4 577.9 584.2 304.8 79.5 *381.0 115 138 609 184.2 71 59
101.6 79.5 38.1 673.1 682.6 355.6 103.1 *457.2 144 190.5 914 227.1 130 98
152.4 103.1 50.8 914.4 927.1 482.6 152.4 *508.0 184 247.7 609 297.2 289 233
203.2 152.4 76.2 1028.7 1038.2 552.5 181.0 *609.6 248 342.9 609 333.5 588 461
254.0 181.0 101.6 1270.0 1292.2 673.1 225.4 *711.2 326 460 609 454.0 1142 869
304.8 225.4 101.6 1422.4 1444.6 762.0 266.7 *838.2 377 530 609 508.0 1618 1205
Full Opening
Reduced Opening
2
)
2
)
Flanged End L Size
Normally Furnished
Approx. Wt. lb.
Nom
Diam.
in.
Ball
Bore
B in.
Stem
Size
in.
Raised
Face
Length
A in.
Ring
Joint
Length
A in.
Diam.
D1
in.
Diam.
D2
in.
Length
A
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in. H
in.
Flanged End L Size
Normally Furnished
Approx. Wt. kg.
Nom
Diam.
mm
Ball
Bore
B mm
Stem
Size
mm
Raised
Face
Length
A mm
Ring
Joint
Length
A mm
Diam.
D1
mm
Diam.
D2
mm
Length
A
mm
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm H
mm
Flange Weld
WeldEndL
Flange Weld
WeldEndL
A
L
D1
H
G
H
C
D2
E
B
Full Opening
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
CAME RON A P I F L A N G E D E N D F U L L O P E N I N G B A L L V A L V E S
(p83)
2.06 2.06 1 11.625 6.5 2.06 3.94 5 36 6.34 44
3.13 3.13 1 14.124 8.25 3.13 5.12 6.75 36 7.44 85
4.06 4.06 1.5 17.125 10.75 4.06 5.94 8.5 36 8.43 165
7.06 6 2 22.125 14 6 7.91 11.5 24 10.29 445
2.06 2.06 1 14.625 8.5 2.06 3.94 5 36 6.34 90
3.13 3.13 1.5 15.125 9.5 3.13 4.88 7 36 7.44 130
4.06 4.06 2 18.125 11.5 4.06 6.77 9.25 36 9.76 255
7.06 6 2 24.125 15 6 8.39 12.5 30 10.92 675
2.06 2.06 2 14.625 8.5 2.06 3.94 5 36 6.34 95
3.13 3.13 1.5 18.625 10.5 3.13 4.88 7 36 7.44 189
4.06 4.06 2 21.625 12.25 4.06 6.77 9.25 24 9.30 361
7.06 6 3 28 15.5 6 8.39 13.5 24 13.13 805
52.3 52.3 25.4 295.3 165.1 52.3 100.1 127.0 914 161.0 20
79.5 79.5 25.4 358.8 209.6 79.5 130.0 171.5 914 189.0 39
103.1 103.1 38.1 435.0 273.1 103.1 150.9 215.9 914 214.1 75
179.3 152.4 50.8 562.0 355.6 152.4 200.9 292.1 609 262.4 202
52.3 52.3 25.4 371.5 215.9 52.3 100.1 127.0 914 161.0 41
79.5 79.5 38.1 384.2 241.3 79.5 124.0 177.8 914 189.0 59
103.1 103.1 50.8 460.4 292.1 103.1 172.0 235.0 914 247.9 116
179.3 152.4 50.8 612.8 381.0 152.4 213.1 317.5 762 277.4 306
52.3 52.3 25.4 371.5 215.9 52.3 100.1 127.0 914 161.0 43
79.5 79.5 38.1 473.1 266.7 79.5 124.0 177.8 914 189.0 86
103.1 103.1 50.8 549.3 311.2 103.1 172.0 235.0 914 236.2 164
179.3 152.4 76.2 711.2 393.7 152.4 213.1 342.9 609 333.5 365
Flange
Flanged End (RTJ) Size
Data for Valve with
Operator Normally
Approx.
Nom
Diam.
in.
Ball
Bore
B in.
Stem
Size
in.
Raised
Face
Length
A in.
Diam.
D1
in.
Diam.
D2
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in.
H
in.
Flange
Flanged End (RTJ) Size Data for Valve with
Operator Normally
Approx.
Nom
Diam.
mm
Ball
Bore
B mm
Stem
Size
mm
Length
A mm
Diam.
D1
mm
Diam.
D2
mm
C.L.
To
Bottom
C
mm
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm
H
mm
2000 psi W.P. 4000 psi TEST
140.6 kg/cm
2
W.P. 281.2 kg/cm
2
TEST
210.9 kg/cm
2
W.P. 421.8 kg/cm
2
TEST
351.5 kg/cm
2
W.P. 703.0 kg/cm
2
TEST
A
L
D1
H
G
H
C
D2
E
B
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
CAME RON A P I F L A N G E D E N D R E D U C E D O P E N I N G B A L L V A L V E S
3.13 2.06 1 14.125 8.25 3.13 3.94 5 36 6.34 80
4.06 3.13 1 17.125 10.75 4.06 5.12 6.75 36 7.44 140
7.06 4.06 1.5 22.125 14 6 5.94 8.5 36 8.43 230
3.13 2.06 1 15.125 9.5 3.13 3.94 5 36 6.34 105
4.06 3.13 1.5 18.125 11.5 4.06 4.88 7 36 7.44 197
7.06 4.06 2 24.125 15 6 6.77 9.25 36 9.76 345
3.13 2.06 1 18.625 10.5 3.13 3.94 5 36 6.34
130
4.06 3.13 1.5 21.625 12.25 4.06 4.88 7 36 7.44 230
7.06 4.06 2 28 15.5 6 6.77 9.25 24 9.30 490
79.5 52.3 25.4 358.8 209.6 100.1 127.0 914 161.0 38
103.1 79.5 25.4 435.0 273.1 130.0 171.5 914 189.0 64
179.3 103.1 38.1 562.0 355.6 150.9 215.9 914
214.1 104
79.5 52.3 25.4 384.2 241.3 100.1 127.0 914 161.0 48
103.1 79.5 38.1 460.4 292.1 124.0 177.8 914 189.0 89
179.4 103.1 50.8 612.8 381.0 172.0 235.0 914
247.9 156
79.5 52.3 25.4 473.1 266.7 100.1 127.0 914 161.0 59
103.1 79.5 38.1 549.3 311.2 124.0 177.8 914 189.0 104
179.3 103.1 50.8 711.2 393.7 172.0 235.0 609 236.2 222
Flanged End (RTJ) Size
Data for Valve with
Operator Normally
Furnished
Approx. Wt.
lb.
Flange
Nom
Diam.
in.
Ball
Bore
B in.
Stem
Size
in.
Length
A in.
Diam.
D1
in.
Diam.
D2
in.
C.L.
To
Bottom
C
in.
Body
Sphere
E
in.
Lever
Length
L
in.
Diameter
Handwheel
for Gear
G
in.
H
in.
Size Data for Valve with
Operator Normally
Furnished
Approx.
Wt. kg.
Flange
Nom
Diam.
mm
Ball
Bore
B mm
Stem
Size
mm
C.L.
Body
Sphere
E
mm
Lever
Length
L
mm
Diameter
Handwheel
for Gear
G
mm
H
mm
79.5
103.1
152.4
79.5
103.1
152.4
79.5
103.1
152.4
Length
A mm
Diam.
D1
mm
Diam.
D2
mm
Flanged End (RTJ)
140.6 kg/cm
2
W.P. 281.2 kg/cm
2
TEST
210.9 kg/cm
2
W.P. 421.8 kg/cm
2
TEST
351.5 kg/cm
2
W.P. 703.0 kg/cm
2
TEST
C.L.
To
Bottom
C
mm
A
L
D1
H
G
H
C
D2
E
B
CONTACT
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
HELP
CAME RON B A L L V A L V E S
(p85)
Centerline to Mounting Flange Dimensions
The dimensions on this page, combined with the top works
dimensions on the following two pages, provide the information
required for determining the overall dimensions of a Cameron
ball valve when an actuator is installed. For additional dimen-
sional information on Cameron ball valves, contact your
Cooper Cameron Valves representative.
Bore Dimension A (in.)
Size ANSI Pressure Class
(in.) 150 300 400 600 900 1500
2 4.06 4.06 4.06 4.06 4.06 4.06
3 5.08 5.08 5.08 5.08 4.76 4.76
4 5.79 5.79 5.79 5.79 6.61 6.61
6 7.64 7.64 7.64 7.64 8.23 8.23
8 9.92 9.92 9.92 9.92 9.92 13.45
10 11.91 11.91 11.91 11.91 15.05 15.96
12 16.70 16.70 16.70 16.70 16.70 17.80
14 17.72 17.72 17.72 17.72 20.55 20.55
16 19.08 19.08 20.78 20.78 22.17 22.17
18 22.19 22.19 22.19 22.19 23.76 27.71
20 23.75 23.75 25.25 25.25 29.23 29.23
22 25.22 25.22 26.78 26.78
24 26.63 26.63 28.20 28.20 32.18 32.18
26 29.59 29.59 29.59 29.59
28 30.97 30.97 30.97 34.99
30 32.62 32.62 32.62 36.65 36.65
34 35.26 35.26 39.31 39.31
36 36.85 40.92 40.92 40.92 44.65
40 44.25 44.25 44.25 48.05
42 45.89 45.89 45.89 49.69
48 50.04 50.04 54.02 56.50
A
Bore Dimension A (mm)
Size ANSI Pressure Class
(mm) 150 300 400 600 900 1500
50.8 103.12 103.12 103.12 103.12 103.12 103.12
76.2 129.03 129.03 129.03 129.03 120.90 120.90
101.6 147.06 147.06 147.06 147.06 167.89 167.89
152.4 194.06 194.06 194.06 194.06 209.04 209.04
203.2 251.97 251.97 251.97 251.97 251.97 341.63
254.0 302.51 302.51 302.51 302.51 382.27 405.38
304.8 424.18 424.18 424.18 424.18 424.18 452.12
355.6 450.09 450.09 450.09 450.09 521.97 521.97
406.4 484.63 484.63 527.81 527.81 563.12 563.12
457.2 563.63 563.63 563.63 563.63 603.50 703.83
508.0 603.25 603.25 641.35 641.35 742.44 742.44
558.8 640.59 640.59 680.21 680.21
609.6 676.40 676.40 716.28 716.28 817.37 817.37
660.4 751.59 751.59 751.59 751.59
711.2 786.64 786.64 786.64 888.75
762.0 828.55 828.55 828.55 930.91 930.91
812.8 895.60 895.60 998.47 998.47
914.4 935.99 1039.37 1039.37 1039.37 1134.11
1016.0 1123.95 1123.95 1123.95 1220.47
1066.8 1165.61 1165.61 1165.61 1262.13
1219.2 1271.12 1271.12 1372.11 1435.10
SD-24030
L
L
CONTACT
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
HELP
Notes: -1 and -2 bolt holes straddle centerline.
-3 bolt holes are on centerline.
Cameron Ball Valve Square Nut and Adapter Flange Mounting Dimensions (BX-1220)
Cameron Ball Valve Square Nut and Adapter Flange (BX-1220)
Cameron Ball Valve Keyed Shaft and Adapter Flange (BX-1221)
F
B
A
C
D
R
K
V
J
Q
L
M
H
L
M
S
N
L
M
M
M M M
E
F
Dash Number - 1 - 2 - 3
Valve Stem Size 1 1.50 2
A - Flange Dia (in.) 6.50 6.50 8.75
B - Boss Dia (in.) 4.747 4.747 6.997
C - Height of Nut (in.) 1.94 2.12 2.62
D - Bolt Size (in.) 0.44 0.54 0.66
F - Width of Nut (in.) 1.5 2.0 2.5
H - Number of Holes 8 8 16
J - Dia Bolt Circle (in.) 5.75 5.75 8.00
Bolt Size 3/8-16 3/8-16 3/8-16
NC-2 NC-2 NC-2
Bolt Torque (ft-lb) 30 30 30
Dash Number - 1 - 2 - 3
Valve Stem Size 25.40 38.10 50.80
A - Flange Dia (mm) 165.10 165.10 222.25
B - Boss Dia (mm) 120.57 120.57 177.72
C - Height of Nut (mm) 49.28 53.85 66.55
D - Bolt Size (mm) 11.18 13.72 16.76
F - Width of Nut (mm) 38.10 30.80 63.50
H - Number of Holes 8 8 16
J - Dia Bolt Circle (mm) 146.05 146.05 203.20
Bolt Size 3/8-16 3/8-16 3/8-16
NC-2 NC-2 NC-2
Bolt Torque (NM) 40.68 40.68 40.68
SD-016398 SD-016397
SD-016400 SD-016399
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
CONTACT
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
HELP
(p87)
Dash Number - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11
Valve Stem Size 3 4 5 7.5 9 11 13 15
A - Number of Holes 16 16 24 24 24 28 28 32
C - Dia Bolt Circle (in.) 10.375 17.25 18.375 24.00 31.00 27.50 27.50 36.00
E - Max Shaft Dia (in.) 2.745 3.245 4.495 5.495 6.245 8.995 8.995
F - Boss Dia (in.) 9.122 16.246 17.121 21.746 28.308 25.496 25.496 33.496
H - Shaft to Slot ID (in.) 2.402 2.831 3.786 4.803 5.409 7.887 6.774
J - Height of Nut (in.) 4.75 5.310 6.25 8.50 9.13 13.31 13.31 19.25
K - Flange Dia (in.) 11.50 18.25 19.380 25.75 32.75 30.00 30.00 39.00
N - Flange Thickness (in.) 0.63 0.63 0.63 1.00 1.00 1.25 1.25 1.50
Q - Key Width (in.) 0.625 0.75 1.25 1.25 1.50 2.00 2.00 2.25
R - Height of Boss (in.) 3.75 4.310 5.250 7.50 8.13 12.00 12.00 17.50
S - Overall Height (in.) 6.120 7.00 8.120 11.00 11.75 16.12 15.84 21.50
V - Adapter Flange 1.00 1.00 1.00 1.00 1.00 1.25 1.25 1.50
V - Thickness (in.)
Flange Bolt Size 1/2-13 1/2-13 1/2-13 7/8-9 7/8-9 1-1/4-8 1-1/4-8 1-1/4-8
NC-2 NC-2 NC-2 NC-2 NC-2 NC-2 NC-2 NC-2
Bolt Torque (ft-lb) 60 60 63 330 330 1000 1000 1600
Cameron Ball Valve Keyed Shaft and Adapter Flange Mounting Dimensions (BX-1221)
Notes: -7 through -11 bolt holes straddle centerline.
-4 through -6 bolt holes are on centerline.
Dash Number - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11
Valve Stem Size 76.20 101.60 127.00 190.50 228.60 279.40 330.20 381.00
A - Number of Holes 16 16 24 24 24 28 28 32
C - Dia Bolt Circle (mm) 263.53 438.15 466.73 609.60 787.40 698.50 698.50 914.40
E - Max Shaft Dia (mm) 69.73 82.43 114.18 139.58 158.63 228.48 228.48
F - Boss Dia (mm) 231.69 412.64 434.87 552.34 719.02 647.59 647.59 850.79
H - Shaft to Slot ID (mm) 61.01 71.91 96.16 122.00 137.38 200.32 172.05
J - Height of Nut (mm) 120.65 134.88 158.75 215.90 231.91 338.03 338.03 488.95
K - Flange Dia (mm) 292.10 463.55 492.26 654.05 831.85 762.00 763.00 990.60
N - Flange Thickness (mm) 16.00 16.00 16.00 25.40 25.40 31.75 31.75 38.10
Q - Key Width (mm) 15.88 19.05 31.75 31.75 38.10 50.80 50.80 57.15
R - Height of Boss (mm) 95.25 109.48 133.35 190.50 206.51 304.80 304.80 444.50
S - Overall Height (mm) 155.45 177.80 206.25 279.40 298.45 409.45 402.34 546.10
V - Adapter Flange 25.40 25.40 25.40 25.40 25.40 31.75 31.75 38.10
V - Thickness (mm)
Flange Bolt Size 1/2-13 1/2-13 1/2-13 7/8-9 7/8-9 1-1/4-8 1-1/4-8 1-1/4-8
NC-2 NC-2 NC-2 NC-2 NC-2 NC-2 NC-2 NC-2
Bolt Torque (NM) 81 81 85 447 447 1356 1356 2169
Notes: -7 through -11 bolt holes straddle centerline.
-4 through -6 bolt holes are on centerline.
CONTACT
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
HELP
Q
M
P
N
P
N
M
Q
M
N
Q
P
M
N
Q
P
P
N
M Q
N
M
P
Q
Manual Gear Dimensions for Cameron Ball Valves Manufactured in U.S.
Manual Gear Dimensions for Cameron Ball Valves Manufactured in France
Manual Gear Dimensions for Cameron Ball Valves 3" and Larger
Model WG1/B6 Model WG1/S12
Model RC431 Model RC250
Mastergear Dynatorque
SD-24023 SD-24022
SD-24024 SD-24025
*Normally furnished in above ground applications.
Stem Effective No. Of
Size Model Ratio Turns M N P Q R
(in.) Per 90 (mm) (mm) (mm) (mm) (mm)
1 MG 11.1 11.5 92.20 118.36 63.5 85.85
1.5 MG 11:1 11.5 92.20 118.36 63.5 85.85
2 MG 18.3:1 18.0 120.65 130.55 66.80 136.65
3 MG 52:1 45.0 154.94 171.70 150.11 137.92
Size Model Ratio Turns M N P Q
(in.) Per 90 (in.) (in.) (in.) (in.)
1 250 11:1 11.5 3.27 5.12 2.17 3.76
1.5 250 11:1 11.5 3.27 5.12 2.17 3.76
2 431 22:1 18 4.39 5.67 4.21 5.43
(in.) Per 90 (mm) (mm) (mm) (mm)
1 250 11:1 11.5 83.06 130.05 55.12 92.27
1.5 250 11:1 11.5 83.06 130.05 55.12 92.27
2 431 22:1 18 111.51 144.02 144.02 137.92
(in.) Per 90 (in.) (in.) (in.) (in.)
3 1/B6 55:1 60 5.75 7.56 4.11 12.64
4 1/B6 110:1 112.5 9.13 8.69 4.69 12.64
5 1/S12 153:1 190 9.69 10.25 5.50 9.50
7.5 1/S12 297:1 297 12.88 12.63 6.63 14.00
9 1/S12 432:1 428 16.38 14.77 7.39 19.50
(in.) Per 90 (mm) (mm) (mm) (mm)
3 1/B6 55:1 60 146.05 192.02 104.39 321.06
4 1/B6 110:1 112.5 236.22 220.73 119.30 321.06
5 1/S12 153:1 190 246.13 260.35 137.70 241.30
7.5 1/S12 297:1 297 327.15 320.80 168.40 355.60
9 1/S12 432:1 428 416.05 375.16 187.71 495.30
(in.) Per 90 (in.) (in.) (in.) (in.)
1 MG 11.1 11.5 3.63 4.66 2.50 3.38
1.5 MG 11:1 11.5 3.63 4.66 2.50 3.38
2 MG 18.3:1 18.0 4.75 5.14 2.63 5.38
3 MG 52:1 45.0 6.10 6.76 5.91 5.43
CONTACT
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
HELP
(p89)
Nominal Wall Thickness and Inside Diameter
Nominal Outside Wall Schedule Schedule Schedule Standard Schedule Schedule Extra Schedule Schedule Schedule Schedule Schedule Dbl Ex.
Pipe Size Diameter I.D. 10 20 30 Weight 40 60 Strong 80 100 120 140 160 Strong
1
/
8 .405
Wall .068 .068 .095 .095
I.D. .269 .269 .215 .215
1
/
4 .540
Wall .088 .088 .119 .119
I.D. .364 .364 .302 .302
3
/
8 .675
Wall .091 .091 .126 .126
I.D. .493 .493 .423 .423
1
/
2 .840
Wall .109 .109 .147 .147 .187 .294
I.D. .622 .622 .546 .546 .466 .252
3
/
4 1.050
Wall .113 .113 .154 .154 .218 .308
I.D. .824 .824 .742 .742 .614 .434
1 1.315
Wall .113 .113 .179 .179 .250 .358
I.D. 1.049 1.049 .957 .957 .815 .599
1
1
/
4 1.660
Wall .140 .140 .191 .191 .250 .382
I.D. 1.380 1.380 1.278 1.278 1.160 .896
1
1
/
2 1.900
Wall .145 .145 .200 .200 .281 .400
I.D. 1.610 1.610 1.500 1.500 1.338 1.100
2 2.375
Wall .154 .154 .218 .218 .343 .436
I.D. 2.067 2.067 1.939 1.939 1.689 1.503
2
1
/
2 2.875
Wall .203 .203 .276 .276 .375 .552
I.D. 2.469 2.469 2.393 2.323 2.125 1.771
3 3.500
Wall .216 .216 .300 .300 .438 .600
I.D. 3.068 3.068 2.900 2.900 2.624 2.300
3
1
/
2 4.000
Wall .226 .226 .318 .318 .636
I.D. 3.548 3.548 3.364 3.364 2.728
4 4.500
Wall .237 .237 .337 .337 .438 .531 .674
I.D. 4.026 4.026 3.826 3.826 3.624 3.438 3.152
5 5.563
Wall .258 .258 .375 .375 .500 .625 .750
I.D. 5.047 5.047 4.813 4.813 4.563 4.313 4.063
6 6.625
Wall .280 .280 .432 .432 .562 .718 .864
I.D. 6.065 6.065 5.761 5.761 5.501 5.189 4.897
8 8.625
Wall .250 .277 .322 .322 .406 .500 .500 .593 .718 .812 .906 .875
I.D. 8.125 8.071 7.981 7.981 7.813 7.625 7.625 7.439 7.189 7.001 6.813 6.875
10 10.750
Wall .250 .307 .365 .365 .500 .500 .593 .718 .843 1.000 1.125
I.D. 10.250 10.136 10.020 10.020 9.750 9.750 9.564 9.314 9.064 8.750 8.500
12 12.750
Wall .250 .330 .375 .406 .562 .500 .687 .843 1.000 1.125 1.312
I.D. 12.250 12.090 12.000 11.938 11.626 11.750 11.376 11.064 10.750 10.500 10.126
14 14.000
Wall .250 .312 .375 .375 .438 .593 .500 .750 .937 1.093 1.250 1.406
I.D. 13.500 13.375 13.250 13.250 13.124 12.814 13.000 12.500 12.126 11.814 11.500 11.188
16 16.000
Wall .250 .312 .375 .375 .500 .656 .500 .843 1.031 1.218 1.438 1.593
I.D. 15.500 15.375 15.250 15.250 15.000 14.688 15.000 14.314 13.938 13.564 13.124 12.814
18 18.000
Wall .250 .312 .438 .375 .562 .750 .500 .937 1.156 1.375 1.562 1.781
I.D. 17.500 17.375 17.124 17.250 16.876 16.500 17.000 16.126 15.688 15.250 14.876 14.438
20 20.000
Wall .250 .375 .500 .375 .593 .812 .500 1.031 1.281 1.500 1.750 1.968
I.D. 19.500 19.250 19.000 19.250 18.184 18.376 19.000 17.938 17.438 17.000 16.500 16.064
24 24.000
Wall .250 .375 .562 .375 .687 .968 .500 1.218 1.531 1.812 2.062 2.343
I.D. 23.500 23.250 22.875 23.250 22.626 22.064 23.000 21.564 20.938 20.376 19.876 19.314
30 30.000
Wall .312 .500 .625 .375 .500
I.D. 29.376 29.000 28.750 29.250 29.000
Note: That schedule 40 in sizes 12" and larger and that Schedule 80 in
sizes 10" and larger do not agree with Schedules 40s and 80s of ASA
B36.19 nor with standard weight and extra strong respectively.
Not included in B36.10
All dimensions given in inches. The wall thicknesses shown represent
nominal of average wall dimensions which are subject to a -12
1
/2% mill
tolerance.
CONTACT
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
HELP
W-K-M
D Y N A S E A L
Standards and Specifications
DynaSeal 370CT ball valves conform to the following design
and testing standards: API 6D; ANSI B16.5 (Steel Pipe Flanges
and Flange Fittings); MSS-SP-6 (Standard Finishes for Pipe
Flanges); MSS-SP-25 (Standard Marking System for Valves);
MSS-SP-55 (Quality Standards for Steel Castings); API 6FA
(Fire-Test Specification).
In addition, the DynaSeal 370CT can be supplied to comply
with these standards: ANSI B31.1 (Power Piping); API 598
(Valve Inspection and Testing); ANSI B31.3 (Chemical Plant
and Petroleum Refinery Piping); MSS-SP-61 (Pressure Testing
of Steel Valves) and ANSI B16.104 (Valve Seat Leakage).
DynaSeal 370CT ball valves trimmed for sour gas service
in accordance with NACE MR-01-75 (latest issue) are available.
Ball Valve Parts Detail
1
/4 1
1
/2 Full Bore
1
/2 2 Regular Port
API 6D Size (in)
150 300
4
6 x 4
6
8 x 6
8
10 x 8
10
12 x 10
12
14 x 12
Pressure Class
Key
Stop Plate
Cap Screw
Bonnet Cap
Compression Ring
Packing Cup
Body
Ground Spring
Body Drain Fitting
Stem Retainer
Pin
Pipe Plug
Trunnion Block
Bearing
Stem
Stem Gasket
Trunnion Block
Bearing
Ball
Seat Insert
Seat Ring
"O" Ring
Tailpiece Gasket
Tailpiece
SD-11557-96
CONTACT
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
HELP
Body Group Trim Number
Carbon Steel CS NACE
Carbon Steel
Stainless Steel NACE
Part
21 24
Low Temp. NACE
23
37
Body A216 GrWCC A352 GrLCC A351 GrCF8M
Tailpiece A216 GrWCC A352 GrLCC A351 GrCF8M
Tailpiece
Cast A216 GrWCC A352 GrLCC A351 GrCF8M
Forged (4" & 6" x 4") CS 316 SS 316 SS
Trunnion Blocks Carbon Steel 316 SS
Studs A193 GrB7 A320 GrL7 A193 GrB7 Zinc Plate
Nuts A194 Gr2H A320 Gr7L A194 Gr2H Zinc Plate
Body Drain Fittings CS SS
Bonnet Cap A216 GrWCC A351 GrCF8M
4" to 8" x 6"
Alloy Steel 303 SS Alloy Steel
Cap Screw
Packing 8" to 14" x 12"
A193 GrB7 A320 GrL7
A193 GrB7
Adjust Stud Nut Zinc Plate
8" to 14" x 12"
A194 Gr2H A194 Gr7L
A194 Gr2H
Stud Zinc Plate
Ground Spring SS
Note: Trims 21, 23 and 24 are suitable for temperatures from -20F to
350F; trim 37 is suitable for temperatures from -50F to 350F.
NACE indicates compliance with NACE MR-01-75.
Seal Group Trim Code
Part TH TA
TAF
Fire-Tested
Temperature Limits -50F to 250F -20F to 350F -20F to 350F
Seat Inserts Filled TFE Filled TFE Filled TFE
Seat O-Ring Hydrin Viton Viton
Stem Gaskets Filled TFE Filled TFE Filled TFE
Stem Packing (Graphite) TFE (Graphite) TFE (Graphite) TFE
Tailpiece Gasket TFE TFE TFE
Internal Group Trim Number
CS NACE
Part
21 24
Low Temp
23
37
Ball A105/ WCC CS CrPlt 316 SS/CF8M CrPlt
Stem CS Zn Plt 4130 - 4140 AS Zn Plt 316 SS
Stem Retainer CS 316 SS
Seat Ring CS 316 SS
Pipe Plug CS SS
Compression Ring CS ENP SS
Trunnion Bearings CS/ TFE SS/ TFE
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Note: Flange holes are tapped
3
/4-10 NC on 6" Fig. 150 Short Pattern (Both Ends), Full Bore Valves.
3
/4-10 NC 6" Fig. 150 Long Pattern (Body End only), Full Bore Valve.
3
/4 NC-10NC 8" Fig. 150 Short Pattern ( Tail Piece End only), Regular Port Valves.
1"-8 NC 10" 300 Short Pattern Both Ends
M = Stem Diameter
R = Key
Worm Gear Operated Valves
Worm Gear Actuator
Wrench Operated Valves Optional Actuator Mounting Brackets
Dimensions
Reduced Port Dimensions
*Centerline-to-face dimension is half of Dimension A.
A* Class
B C D E F G H M N P Q R S T V W X Z
9
7
/8 36 7
9
/16 1
1
/4 20 2
9
/16 11
3
/8
1
/4 10
5
/8 8
5
/8 3
1
/2 3
1
/2
9
/16 2
7
/16
12
5
/8 48 9
7
/16 1
1
/2 20 3
1
/8 11
3
/8
3
/8 12
15
/16 11 3
1
/2 3
1
/2
9
/16 2
7
/16
12
1
/2 2
3
/8 20 4
5
/8 13
3
/8
5
/8 18
9
/16 15
11
/16 7
3
/4 5
3
/4
11
/16 3
15
1
/8 2
15
/16 20 4
5
/8 13
3
/8
3
/4 20
7
/8 18
3
/8 7
3
/4 5
3
/4
11
/16 3
16
3
/8 2
15
/16 20 4
5
/8 13
3
/8
3
/4 22
5
/16 19
13
/16 7
3
/4 5
3
/4
11
/16 3
16
3
/8 2
15
/16 20 9
15
/16 13
7
/8
3
/4 24
9
/16 21
1
/16 7
3
/4 5
3
/4
11
/16 3
150 150 300 300
Long Short Long Short BW
RF RJ RF RJ RF RJ RF RJ
6x4 NA NA 10
1
/2 11 15
7
/8 16
1
/2 NA NA 15
7
/8 4 6 4
5
/8 8
5
/8
8x6 18 18
1
/2 11
1
/2 12 NA NA 16
1
/2 17
1
/8 16
1
/2 6 8 6
3
/8 11
3
/8
10x8 21 21
1
/2 NA NA 22
3
/8 23 NA NA 22 8 10 8
1
/8 16
3
/8
12x10 24 24
1
/2 NA NA 25
1
/2 26
1
/8 NA NA 25 10 12 9
13
/16 18
1
/2
14x12 27 27
1
/2 NA NA 12 14 12 20
1
/8
14x12 30 30
5
/8 NA NA 30 12 14 12 20
1
/8
Size
(in)
300
Full Port Dimensions
*Centerline-to-face dimension is half of Dimension A except:
4" Fig. 150 Full BoreStem is offset
1
/2" toward body end.
6"Fig. 150 Full Bore Long PatternStemis offset 2
1
DynaSeal 370CT ball valves available in flanged (raised face and ring
joint) and butt weld.
A* Class
B C D E F G H M N P Q R S T V W X Z
9
7
/8 36 7
9
/16 1
1
/4 20 2
9
/16 11
3
/8
1
/4 10
5
/8 8
13
/16 3
1
/2 3
1
/2
9
/16 2
7
/16
12
5
/8 48 9
7
/16 1
1
/2 20 3
1
/8 11
3
/8
3
/8 12
15
/16 11 3
1
/2 3
1
/2
9
/16 2
7
/16
12
1
/2 2
3
/8 20 4
5
/8 13
3
/8
5
/8 18
9
/16 15
11
/16 7
3
/4 5
3
/4
11
/16 3
15
1
/8 2
15
/16 20 4
5
/8 13
3
/8
3
/4 20
7
/8 18
3
/8 7
3
/4 5
3
/4
11
/16 3
16
3
/8 2
15
/16 20 4
5
/8 13
3
/8
3
/4 22
5
/16 19
13
/16 7
3
/4 5
3
/4
11
/16 3
16
3
/8 2
15
/16 20 9
15
/16 13
3
/8
3
/4 24
9
/16 21
1
/16 7
3
/4 5
3
/4
11
/16 3
150 150 300 300
Long Short Long Short BW
RF RJ RF RJ RF RJ RF RJ
4 9 9
1
/2 NA NA 12 12
5
/8 NA NA 12 4 4 4
5
/8 8
5
/8
6 15
1
/2 16 10
1
/2 11 15
7
/8 16
1
/2 NA NA 15
7
/8 6 6 6
3
/8 11
3
/8
8 18 18
1
/2 NA NA 19
3
/4 20
3
/8 16
1
/2 17
1
/8 16
1
/2 8 8 8
1
/8 16
3
/8
10 21 21
1
/2 NA NA 22
3
/8 23 18 18
5
/8 22 10 10 9
13
/16 18
1
/2
12 24 24
1
/2 NA NA 12 12 12 20
1
/8
12 25
1
/2 26
1
/8 NA NA 25 12 12 12 20
1
/8
Size
(in)
300
Actuator mounting bracket for 8" valves
and larger. Order less gearing.
Actuator mounting bracket for 4" and 6"
full bore valves.
See Note
F
G
D
B
C
A
P
S
T
D
C B
A
E
H
V
W
X
V
W
X
Z
Z
Q
N
See Note
SD-11558
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Weights, Stem Torques and Flow Characteristics
Note: The torque values listed are based on valves controlling the
flow of clean ladings at ambient temperatures. These are the maximum
breakaway torques. Running torques will generally average
1
/3 of these
values. Reseating torques will average
3
/4 of these values. For operating
temperatures between -20F to -50F, multiply these values by 1.20.
Consult factory when valves are to be used in high flow conditions.
Size
Class 150 Class 300
(in)
4 35
6 x 4 35
6 40
8 x 6 40
8 95
10 x 8 95
10 95
12 x 10 95
12 95 260
14 x 12 95 260
Worm Gear Actuator Weights (lbs)
Working Pressure (psi)
Valve Bore
Size (in)
0-150 275 720
4 1248 1440 2520
6 2748 3240 5760
8 5248 6500 10992
10 8124 10250 18000
12 14748 17752 27600
Stem Torques (in-lbs)
Valve
CV
*
Size (in)
4 2450
6 x 4 855
6 5265
8 x 6 2275
8 10485
10 x 8 4290
10 17330
12 x 10 6635
12 26030
14 x 12 11160
Flow Characteristics (CV)
*
Note: Weights shown are for bare stem valves.
BW = Butt Weld
FL = Flanged End
Includes worm gear actuator, handwheel and mounting hardware.
*
Flow of water in U.S. gal/min/1psi pressure drop.
Size
End Connection Class 150 Class 300
(in)
4
BW 79 79
FL 98 122
6 4
BW 139 139
FL 118 175
6
BW 189 189
FL 162 221
8 6
BW 237 237
FL 217 293
8
BW 273 273
FL 423 472
10 8
BW 365 365
FL 446 582
10
BW 686 686
FL 771 934
12 10
BW 816 816
FL 867 1047
12
BW 873 873
FL 1136 1310
14 12
BW 1070 1070
FL 1178 1398
Weights (lbs) Valve Only
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
3 7 0 S E R I E S
How to Order
Size Valve Pressure End Body Seat Seal Internal
Inches Model Class Connections Group Group Group Group
Actuation
2 E4 600 RF x RF 21 N H 21 W R
Trim Application Information
Standard materials charts have been shown in each valve section
in order to assist the user to custom fit W-K-M valves to his
application. The chart on this page identifies in general terms
each of the standard W-K-M trims and where the trims may
be used. This information is based on our experience and is
believed to be reliable. It is intended to be used by persons
having technical skill and at their own discretion and risk.
Also listed are common optional trims available in most models.
*Ethylene Propylene Rubber
Note: Please refer to trim charts in each section (Model 370E4, 370CT,
370D4) of the catalog for specific application details including the
availability of fire-tested materials. Please contact the factory for the
availability of trims other than those listed or for proper application of
the trims listed. Available end connections: RF, RTJ.
(Weld ends consult factory)
Carbon Steel 21
Stainless Steel NACE 23
Carbon NACE 24
2 MILS ENC NACE 27
Carbon Low Temp. NACE 37
Viton A
Buna B
Nylon 12 N
PTFE T
Nylon 6 Y
Tefzel Z
370CT
370E4
370D4
Viton A
Buna B
EPR* E
Hydrin H
Hi-Fluorine Viton F
Bare Stem BS
Wrench WR
Worm Gear WGA
2" Square Nut SQ
Less Gear
L/G
(with mounting plate)
Carbon Steel 21
Stainless Steel NACE 23
Carbon NACE 24
3 MILS ENC NACE 27
Carbon Low Temp. NACE 37
Actuation: Valves are priced bare stem. Available options are:
2" through 4", 370E4 - Multi-position wrench head or long wrench.
Valves are available with worm gear operator, less gear with bracket for
actuator adaptation, or complete with power actuator. 6" and smaller
D4 ball valves are available with 2" square operating nuts.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
3 7 0 D 4 T R U N N I O N B A L L V A L V E S
DynaSeal 370D4 ball valves conform to the following design and
testing standards: API 6D; ANSI B16.34 (Valves, Flanged End);
ANSI B16.5 (Steel Pipe Flanges and Flange Fitting): MSS-SP-6
(Standard Finishes for Pipe Flanges); MSS-SP-25 (Standard
Marking System for Valves); MSS-SP-55 (Quality Standards for
Steel Castings); and API 6FA (Fire-Test Specification).
In addition the DynaSeal 370D4 can be supplied to comply
and Petroleum Refining Piping); MSS-SP-61 (Pressure Testing
DynaSeal 370D4 ball valves trimmed for sour gas service
in accordance with NACE MR-01-75 (latest issue) are available
in both carbon steel and alloy materials.
150 300 600 900
API 6D Pressure Class
Size (in.)
2
3 2
3
4 3
4
6 4
Grease Fitting
Check Valve
Body Tailpiece
O-Ring
Tailpiece
Seat Spring
Seat Assembly
Ball
Stem Bearing
Stem
Stem Seal
Stem O-Rings
Stop Plate
Stem Stop
Body
Optional Stem Sealant
Injection Fitting
Grease Fitting
Studs
Nuts
Seat O-Rings
Trunnion Bearing
Trunnion
Grounding Spring
Trunnion O-Ring
Lower Cover Plate
Screw/Bolts - Trunnion
Bleed and Drain Fitting
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Standard Materials, End Entry Ball Valves, 2" 6" 4" Class 150 through 900
Part
Carbon Steel CS NACE Stainless Steel NACE
21 24 23
Body A216 Gr WCC A352 Gr LCC A351 Gr CF8M
Tailpiece A216 Gr WCC A352 Gr LCC A351 Gr CF8M
Studs A193 Gr B7 A193 Gr B7M A320 Gr L7M A193 Gr B7M (Zinc Plt)
Nuts A194 Gr 2H A194 Gr 2HM A194 Gr 7ML A194 Gr 2HM (Zinc Plt)
Screw/Bolts
A574/A193 Gr B7 A193 Gr B7M A320 Gr L7M
A193 Gr B7M
Trunnion (Zinc Plt)
Stem Stop CS (Zinc Plt)
Stem Bearing CS/TFE SS/TFE
Trunnion Bearing CS/TFE SS/TFE
Fittings CS SS
Stop Plate CS
Wrench Ductile Iron
Lower Cover Plate CS 4130 316 SS
Carbon Steel
Low Temp. NACE
37
Part
21 24 23
Ball A105 CS ENP A182 Gr 316 SS ENP
Stem 4130/4140 AS ENP A564 (17-4 PH) SS ENP
Trunnion 4130/4140 AS ENP A564 (17-4 PH) SS ENP
Seat Outer Ring 1018/1029 CS ENP A564 (17-4 PH) SS
Seat Retainer 1018/1029 CS ENP A182 Gr 316 SS
Seat Spring CS B637 X750
Grounding Spring SS
Carbon Steel
Low Temp. NACE
37
Part YH
YAF
Fire Tested
Temperature Limits -50F to +250F -20F to +250F
Seat Face Seals Nylon Nylon
Stem Seal Filled TFE
Stem O Rings Hydrin Viton
Body Tailpiece
O Ring
Hydrin Viton
Seat O Rings Hydrin Viton
Trunnion O Ring Hydrin Viton
Note: Trims 21, 23 and 24 are suitable for ambient temperatures from
-20F to 350F, trim 37 is suitable for ambient temperatures from -50F
to 350F.
NACE signifies compliance to NACE MR-01-75.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Standard Materials, End Entry Ball Valves, 6" 8" 6" Class 150 through 300
Part
21 24 23
BoltTrunnion A193 Gr B7 A193 Gr B7M A320 Gr L7M A193 Gr B7M (Zinc Plt)
Stem Bearing CS/ TFE SS/ TFE
Trunnion Bearing CS/ TFE SS/ TFE
Fittings CS SS
Stop Plate CS
Wrench Ductile Iron
Adapter Plate CS
Carbon Steel
Low Temp. NACE
37
Part
21 24 23
Ball A105 CS ENP A182 Gr 316 SS ENP
Stem 4130/4140 AS ENP A564 (17-4 PH) SS
Trunnion 4130/4140 AS ENP A564 (17-4 PH) SS
Seat Outer Ring 1018/1029 CS ENP A564 (17-4 PH) SS
Seat Retainer 1018/1029 CS ENP A182 Gr 316 SS
Seat Spring CS B637 X750
Grounding Spring SS
Stem Retainers AS64 T630 (17-4 PH)
Carbon Steel
Low Temp. NACE
37
Part YH
YAF
Fire Tested
Temperature Limits -50F to +250F -20F to +250F
Seat Face Seals Nylon
Seat Backup Ring Nylon
Stem Backup Ring Nylon
Stem Thrust Washer Nylon
Stem O Rings Hydrin Viton
Body Tailpiece
Hydrin Viton
O Ring
Seat O Rings Hydrin Viton
Trunnion O Ring Hydrin Viton
to 350F.
NACE signified compliance to NACE MR-01-75.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Standard Materials 6" 14" 12" Class 600 and 900
Part
21 24 23
Cap Screws Alloy Steel A193 Gr B7M A320 Gr L7M A193 Gr B7M (Zinc Plt)
Fittings CS SS
Pipe Plugs CS SS
Adapter Plate CS
Carbon Steel
Low Temp. NACE
37
to 350F.
NACE signifies compliance to NACE MR-01-75.
Part YH
YAF
Fire-Tested
Temperature Limits -50F to 250F -20F to 250F
Seat Face Seals Nylon
Stem Seal O-Ring Hydrin Viton
Body Tailpiece O-Ring Hydrin Viton
Seat O-Ring Hydrin Viton
Lower Cvr Plate O-Ring Hydrin Viton
Seal Group Trim Number
Part
21 24 23
Ball A216 Gr WCC/A105 CS ENC
A351 GR CF8M/
A182 Gr 316/ENC
Dowel Pins A564 T630 (17-4PH)
Stem/ Trun 4130-4140 AS ENC A564 T630 (17-4PH) ENC
Seat Rings A216 Gr WCC/A105
A182 Gr 316/
A351 GrCF8M
Seat Springs CS B637 X750
Sleeve Bearings SS/ TFE
Thrust Washers SS
Ground Springs SS
Stem Retainers A564 T630 (17-4PH)
Carbon Steel
Low Temp. NACE
37
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
DynaSeal 370D4 ball valves conform to the following design and
testing standards: API 6D; ANSI B16.34 (Valves, Flanged End);
ANSI B16.5 (Steel Pipe Flanges and Flange Fitting): MSS-SP-6
(Standard Finishes for Pipe Flanges); MSS-SP-25 (Standard
Marking System for Valves); MSS-SP-55 (Quality Standards for
Steel Castings); and API 6FA (Fire-Test Specification).
In addition the DynaSeal 370D4 can be supplied to comply
and Petroleum Refining Piping); MSS-SP-61 (Pressure Testing
DynaSeal 370D4 ball valves trimmed for sour gas service
in accordance with NACE MR-01-75 (latest issue) are available
in both carbon steel and alloy materials.
600 900
6
8 6
8
10 8
10
12 10
12
14 12
API 6D Pressure Class
Size (in.)
Body Stud Nut
Injection
Fitting
Tailpiece
Tailpiece
O-Ring
Seat
Spring
Seat
Trunnion
Trunnion Bearing
Lower Cover Plate
Cap Screws
O-Ring
Ground Spring
Seat O-Ring
Body Stud
Body Drain
Fitting
Name Plate
Pipe Plug
Stem Retainer
Check Fitting
Injection Fitting
Packing/Injection
Fitting
Body
Backup Ring Stem Dowel
Pin
Backup Ring
Stem
Thrust Washer
Key
Operator Adapter
Cap Screws
O-Ring
SD-11445
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Dimensions 6" 14"x12" Class 600 and 900
API 6D Class 600 Dimensions
*
Valve
B BB H J K L M N P R S
Size (in)
A
RF RJ
API 6D Class 900 Dimensions
Valve
B BB H J K L M N P R S
Size (in)
A
RF RJ
6 22 22.12 6 6 7.12 9.43 11.25 1.503 7.50 9.06 .382 .56-(8) .875
8 6 26 26.12 6 8 7.12 9.43 11.25 1.503 7.50 9.06 .382 .56-(8) .875
8 26 26.12 8 8 9.25 11.75 14.81 1.685 8.00 9.25 .382 .69-(8) 1.06
10 8 31 31.12 8 10 9.25 11.75 14.81 1.685 8.00 9.25 .382 .69-(8) 1.06
10 31 31.12 10 10 11.38 13.81 16.93 2.003 7.50 9.50 .506 .56-(8) 1.12
1210 33 33.12 10 12 11.38 13.81 16.93 2.003 7.50 9.50 .506 .56-(8) 1.12
12 33 33.12 12 12 13.93 16.13 19.50 2.560 10.25 12.50 .631 .69-(8) 1.25
1412 35 35.12 12 14 13.93 16.13 19.50 2.560 10.25 12.50 .631 .69-(8) 1.25
6 24 24.12 6 6 8.06 10.06 13.12 1.685 8.00 9.25 .382 .56-(8) 1.06
8 6 29 29.12 6 8 8.06 10.06 13.12 1.685 8.00 9.25 .382 .56-(8) 1.06
8 29 29.12 8 8 10.31 12.38 15.31 2.003 7.50 9.50 .506 .56-(8) 1.12
10 8 33 33.12 8 10 10.31 12.38 15.31 2.003 7.50 9.50 .506 .56-(8) 1.12
10 33 33.12 10 10 12.25 14.50 18.93 2.560 10.25 12.50 .631 .69-(8) 1.25
1210 38 38.12 12 12 12.25 14.50 18.93 2.560 10.25 12.50 .631 .69-(8) 1.25
12 38 38.12 12 12 14.87 17.75 21.56 2.745 10.25 12.50 .631 .69-(8) 1.62
1412 40.5 40.87 12 14 14.87 17.75 21.56 2.745 10.25 12.50 .631 .69-(8) 1.62
A
H
J
N
M
S
B
BORE
P=KEYWAY
L STEM DIA
R=HOLE SIZE
NO. OF HOLES
BB
DIA
K
*
Butt weld dimensions same as Raised Face Flanged End (RF)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Stem, Lever and Handle 2" 6"x4" Class 150 and 300
Class 150 Dimensions (inches)
2 3 2 3 4 3 4 6 4
RF RJ RF RJ RF RJ RF RJ RF RJ RF RJ
Size
2 3 2 3 4 3 4 6 4
Size
A 8.50 9.12 11.12 11.75 11.12 11.75 12.00 12.63 12.00 12.63 15.88 16.50
B 2.00 3.00 3.00 4.00 4.00
BB 2.00 3.00 4.00 4.00 6.00
H 4.69 5.54 6.72
J 3.29 4.81 7.03
K 4.80 6.38 8.55
L 1.112 1.112 1.489
P .688 .688 .989
A 7.00 7.50 8.00 8.50 8.00 8.50 9.00 9.50 9.00 9.50 15.50 16.00
B 2.00 3.00 3.00 4.00 4.00
BB 2.00 3.00 4.00 4.00 6.00
H 4.69 5.54 6.72
J 3.29 4.81 7.03
K 4.80 6.38 8.55
L 1.112 1.112 1.489
P .688 .688 .989
J
H
K
A
BB
DIA
B
BORE
L STEM DIA
P=STEM FLAT
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Stem, Lever and Handle 2" 6"x 4" Class 600 and 900
*
2 3 2 3 4 3 4 6 4
Size
2 3 2 3 4 3 4 6 4
Size
A 11.50 11.62 14.00 14.12 14.00 14.12 17.00 17.12 17.00 17.12 22.00 22.12
B 2.00 3.00 4.00
BB 2.00 3.00 4.00 6.00
H 4.69 5.54 5.29 6.72
J 3.29 4.81 7.03
K 4.80 6.38 8.55
L 1.112 1.489
P .688 .989
A 14.50 14.62 15.00 15.12 15.00 15.12 18.00 18.12 18.00 18.12 24.00 24.12
B 2.00 3.00 4.00
BB 2.00 3.00 4.00 6.00
H 4.69 5.54 5.68 6.85
J 3.73 4.81 7.03
K 5.25 6.38 8.55
L 1.112 1.489
P .688 .989
J
H
K
A
BB
DIA
B
BORE
L STEM DIA
P=STEM FLAT
*
Butt weld dimensions same as Raised Face Flanged End (RF)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Valve Bore Size (in) Weight
2 30
3 35
4 40
6 40
8 40
10 95
12 260
Worm Gear Actuator Weights (lbs)
Valve Bore
Size (in.)
0-275 750 1000 1500 2250
2 284 426 554 811 1200
3 381 1040 1356 1988 2950
4 637 1738 2265 3317 5100
6 3914 4403 5870 8806 13,152
8 6531 8595 11,640 17,190 26,054
10 8158 13,954 18,606 27,909 42,383
12 10,183 21,284 28,378 42,568 62,445
Note: The torques listed above are based on valves controlling the
flow of clean ladings. These are maximum breakaway torques.
Running torques will generally average 1/3 of these values.
Reseating torques will average 3/4 of these values. For operating
temperatures between -20F and -50F, multiply these values by
1.20. Multiply torque values by 1.3 for elastomer face seals.
Valve Pressure Class
Valve Bore
Size (in.)
150 300 600 900
2 33 45 65
3 2 82
3 60 78 128
4 3 175
4 105 145 200
6 4 155 200 275
6 234 285 500 650
8 6 575 748
8 800 1010
10 8 920 1162
10 1270 1580
12 10 1460 1817
12 1880 2450
14 12 2160 2818
Valve Pressure Class
Valve Bore
Size (in.)
150 300 600 900
2 511 567 406
3 2 179
3 1380 1167 1043
4 3 528
4 2580 2235 1890
6 4 799 762 745
6 5450 5400 4525 4525
8 6 2150 2100 2085 2085
8 8900
10 8 3545
10 14,495
12 10 6063
12 22,500
14 12 9320
Flow Characteristics (CV)*
Includes Worm Gear Actuator, Handwheel and Mounting Hardware.
Valve Size 4 ft. 6 ft. 8 ft. 10 ft.
3"& 4" 6 & 9C 150 185 220 250
6" 6& 9 C 220 300 370 450
8" 6& 9 C 250 330 410 490
10" 6& 9 C 255 340 430 520
12" 6& 9 C 375 470 560 655
Extension Weights (lbs)
*Flow of water in U.S. gal/min/1 psi pressure drop.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
DynaSeal 370E4 ball valves conform to the following design
and testing standards: API 6D; ANSI B16.34 (Valves, Flanged
End); ANSI B16.5 (Steel Pipe Flanges and Flange Fittings);
MSS-SP-6 (Standard Finishes for Pipe Flanges); MSS-SP-25
(Standard Marking System for Valves); MSS-SP-55 (Quality
Standards for Steel Castings); MSS-SP-72 (Ball Valves for
General Service); and 6FA (Fire-Test Specification).
In addition the DynaSeal 370E4 can be supplied to comply
and Petroleum Refinery Piping); MSS-SP-61 (Pressure Testing
DynaSeal 370E4 ball valves trimmed for sour gas service
in accordance with NACE MR-01-75 (latest issue) are available.
1
/4 1
1
/2 Full Bore
1
/2 2 Regular Port
API 6D API 6A Size (in)
600 900 1500 2500 5000
2
3 2
3
4 3
4
6 4
6
8 6
Pressure Class
Ball & Lower
Trunnion
Seat
C Spring
Fire-tested
Seal
O-Ring
Backup Ring
Trunnion
Bearing
Ground Spring
Body
Drain Fitting
Stud
Stem
Stem Thrust
Washer
Backup Ring
O-Ring
Backup Ring
Stem Bearing
O-Ring
Weather
Seal
Nut
Wrench Head
Retainer Ring
Three-way
Wrench Head
Stop Retainer Ring
Stop Plate
Stop Pin
Cover Plate
O-Ring
SD-11282
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
CS NACE
Part
21 24
Low Temp
23
37
Cover Plate A105 CS A352 GrLCC/4130-4140 AS A182 GrF316 SS
Stop Plate CS
Lower Trunnion Bearing CS/ TFE SS/ TFE
Stop Pin CS
Cover Plate Stud A193 GrB7 A320 GrL7 A193 GrB7 Zinc Plate
Cover Plate Nut A194 Gr2H A194 Gr7L A194 Gr2H Zinc Plate
Fittings CS SS
Wrench Ductile Iron
Standard Materials 2" 8" x 6" Classes 600 and 900
CS NACE
Part
21 24
Low Temp
23
37
Ball A105 CS ENC A182 GrF316 SS ENC
Lower Trunnion 4130 - 4140 AS ENC A564 T630 (17-4PH) ENC
Stem 4130 - 4140 AS ENC A564 T630 (17-4PH) ENC
Seat Outer Ring 1018 - 1029 CS 17-4 H-1150 DBL/A269 Gr316 SS
Seat Retainer 1018 - 1029 CS 316 SS
Seat Insert See Seal Group
C Spring B637 X750
Ground Spring SS
Part NH NA AA
NHF/NAF/AAF
Fire-Tested
Temperature Limits -50F to 250F -20F to 250F -20F to 350F
Cover Plate O-Ring Hydrin Viton
Stem O-Ring Hydrin Viton
Seat Insert N12 Viton
Weather Seal Neoprene
Seat Seal (Fire-Test) NA Graphite Filled Rope
These materials are
the same as shown
under Standard Trims.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Carbon Steel
Part
21 24
Low Temp. NACE
23
37
Cover Plate A105 CS A352 GrLCC/4130-4140 AS A182 GrF316 SS
Stop Plate CS
Stem Bearing CS/TFE SS/TFE
Lower Trunnion Bearing CS/TFE SS/TFE
Stop Pin CS
Fittings CS SS
Wrench Ductile Iron
Standard Materials 2" 8" x 6" Class 1500
Carbon Steel
Part
21 24
Low Temp. NACE
23
37
Ball 4130 - 4140 AS ENC A564 T630 (17-4PH) ENC
Seat Outer Ring 4130 - 4140 AS 17-4PH H1150 DBL
C Spring B637 X750
Ground Spring SS
Part NH NA
NHF/NAF
Fire-Tested
Seat Insert N12
These materials are
the same as shown under
Standard Trims.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
D Y N A S E A L
Carbon Steel
Part
21 24
Low Temp. NACE
23
37
Cover Plate 4130-4140 AS/A216 GrWCC A352 GrLCC/4130-4140 AS A217 CA15/AISI 410 SS
Stop Plate CS
Lower Trunnion Bearing CS/ TFE SS/ TFE
Stop Pin CS
Fittings CS SS
Wrench Ductile Iron
Standard Materials 2" 6" x 4" Class 2500
Carbon Steel
Part
21 24
Low Temp. NACE
23
37
C Spring B637 X750
Ground Spring SS
Part NH NA
NHF/NAF
Fire-Tested
Seat Insert N12
These materials are
Standard Trims.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Carbon Steel
Part Low Temp. NACE
21 24
37
Body A487 Gr4
Cover Plate 4130-4140 AS/A487 Gr4
Stop Plate CS
Stem Bearing CS/ TFE
Lower Trunnion Bearing CS/ TFE
Stop Pin CS
Cover Plate Stud A193 GrB7 A320 GrL7
Cover Plate Nut A194 Gr2H A194 Gr7L
Fittings CS SS
Wrench Ductile Iron
Standard Materials 2" 6" API 5000
Carbon Steel
Part
21 24
Low Temp. NACE
23
37
C Spring B637 X750
Ground Spring SS
Part NH NA
NHF/NAF
Fire-Tested
Seat Insert N12
These materials are
Standard Trims.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
D Y N A S E A L
B C D E G N P Q R S T U
2 11
1
/2 11
5
/8 14
1
/2 14
5
/8 2 3
1
/8 5
5
/16 2
5
/8 12 4
3
/8 6
3
/16
3 2 14 14
1
/8 15 15
1
/8 2 3 3
1
/8 5
5
/16 2
5
/8 12 4
3
/8 6
3
/16
3 14 14
1
/8 15 15
1
/8 3 4
1
/4 6
39
/64 2
5
/8 12 4
3
/8 6
3
/16
4 3 17 17
1
/8 18 18
1
/8 3 4 4
1
/4 6
39
/64 2
5
/8 12 4
3
/8 6
3
/16
4 17 17
1
/8 18 18
1
/8 4 5
1
/16 7
15
/32* 2
5
/8 12 4
3
/8 6
3
/16
6 4 22 22
1
/8 24 24
1
/8 4 6 5
1
/16 7
15
/32* 2
5
/8 12 4
3
/8 6
3
/16
6 22 22
1
/8 24 24
1
/8 6 6
3
/4 14.0 4
5
/8 20 4
5
/8 10
5
/8 17
11
/16 14
9
/16 10
1
/2
8 6 26 26
1
/8 29 29
1
/8 6 8 6
3
/4 14.0 4
5
/8 20 4
5
/8 10
5
/8 17
11
/16 14
9
/16 10
1
/2
Dimension A
Valve
Size
(in)
600 900
RF RJ RF RJ
600 and 900 API 6D Pressure Classes
Worm Gear Operator (6" & 8" x 6")
Dimensions
1500 API 6D Pressure Class; API 6A 5000 psi WP
*These dimensions are for the 4" class 600 valves only.
Dimensions for 4" and 6" x 4" class 900 valves are: E=8
1
/8.
Note: Butt weld dimensions same as raised face flange end (RF).
B C D E G N P Q R S T U
2 2
1
/16 14
1
/2 14
5
/8 2
1
/16 3
9
/16 5
7
/8 2
5
/8 12 4
3
/8 6
3
/16
3 2 3
1
/8 x 2
1
/16 18
1
/2 18
5
/8 2
1
/16 3
1
/8 3
9
/16 5
7
/8 2
5
/8 12 4
3
/8 6
3
/16
3 3
1
/8 18
1
/2 18
5
/8 3
1
/8 4
9
/16 7
1
/4 2
5
/8 12 4
3
/8 6
3
/16
4 3 4
1
/16 x 3
1
/8 21
1
/2 21
5
/8 3
1
/8 4
1
/16 4
9
/16 7
1
/4 2
5
/8 12 4
3
/8 6
3
/16
4 4
1
/16 21
1
/2 21
5
/8 4
1
/16 6
1
/8 11
1
/4 2
5
/8 12 4
3
/8 6
3
/16
6 4 7
1
/16 x 4
1
/16 27
3
/4 28 4
1
/16 6 6
1
/8 11
1
/4 2
5
/8 12 4
3
/8 6
3
/16
6 7
1
/16 x 6 27
3
/4 28 6 9
1
/4 15
5
/8 4
5
/8 20 6
1
/2 10
5
/8 17 15 12
1
/2
8 6 32
3
/4 33
1
/8 6 8 9
1
/4 15
5
/8 4
5
/8 20 6
1
/2 10
5
/8 17 15 12
1
/2
Dimension A Valve Size (in)
1500 5000 1500 5000
API 6D API 6A RF RJ RJ
Dimension A
B C D E G N P Q
Valve Size (in) 2500
RF RJ
2 17
3
/4 17
5
/8 1
3
/4 4 8
9
/32 2
5
/8 12 4
3
/8 6
3
/16
3 2 22
3
/4 23 1
3
/4 2
1
/2 4 8
9
/32 2
5
/8 12 4
3
/8 6
3
/16
3 22
3
/4 23 2
1
/2 5
3
/8 11
1
/16 4
3
/8 18 6
5
/8 12
11
/16
4 3 26
1
/2 26
7
/8 2
1
/2 3
1
/2 5
3
/8 11
1
/16 4
3
/8 18 6
5
/8 12
11
/16
4 26
1
/2 26
7
/8 3
1
/2 6
9
/16 12
9
/16 4
3
/8 18 6
5
/8 12
11
/16
6 4 36 36
1
/2 3
1
/2 5
7
/32 6
9
/16 12
9
/16 4
3
/8 18 6
5
/8 12
11
/16
2500 API 6D Pressure Class
T
M
A
C B
D
U
E
Stem
Top
S
G
-Bore Thru Ball
M=Stem Dial
R=Keyway
P
Q
N
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Actuator Mounting Bracket and Other Dimensions - 600 and 900 API 6D Pressure Classes
Valve
BB V W
H
Pipe Size
M Keyway SF Y* Size Handle
(in) Dia.
x Length
2 3.0 8 3.536 SQ 1
1
/2 SCH 80 18" 1.110 .617 1.5 4-
1
/2"
3 2 3.0 8 3.536 SQ 1
1
/2 SCH 80 18" 1.110 .617 1.5 4-
1
/2"
3 4.0 10 3.536 SQ 1
1
/8
3
/4 SCH 80 36" 1.50 .994 1.75 4-
1
/2"
4 3 4.0 10 3.536 SQ 1
1
/8
3
/4 SCH 80 36" 1.50 .994 1.75 4-
1
/2"
4 6.0 12 3.536 SQ 1
1
/8
3
/4 SCH 80 36" 1.50 .994 1.75 4-
1
/2"
6 4 6.0 12 3.536 SQ 1
1
/8
3
/4 SCH 80 36" 1.50 .994 1.75 4-
1
/2"
6 9 DIA 7
1
/2 DIA 1
9
/16 2.375
5
/8 4 4-
1
/2"
8 6 9 DIA 7
1
/2 DIA 1
9
/16 2.375
5
/8 4 4-
1
/2"
Valves 2" - 6" x 4" need pipe or round bar for handle.
*Y = Number and size of bolts for actuator mounting.
Actuator Mounting Bracket and Other Dimensions - 1500 and 2500 API 6D Pressure Classes, API 6A 5000 psi WP
Valve
Class BB V W
H
Pipe Size
M Keyway SF Y* Size Handle
(in) Dia.
x Length
2 & 3 x 2 (1500) 3.0 8 3.536 SQ 1
1
/2 SCH 40 18" 1.110 .617 1.66 4-
1
/2"
2 (2500) 3.0 8 3.536 SQ 1
1
/2 SCH 80 18" .995
1
/4 x 3
1
/4 4-
1
/2"
3 & 4 x 3 (1500) 4.0 10 3.536 SQ 1
1
/8
3
/4 SCH 160 36" 1.50 .994 1.94 4-
1
/2"
3 (2500) 4.0 10 5.313 SQ 1
3
/4 1
1
/4 SCH 160 36" 1.50
3
/8 x 4
1
/2 4-
5
/8"
4 & 6 x 4 (1500) 6.0 12 5.313 SQ 1
3
/4 1
1
/4 SCH 160 36" 1.50
3
/8 x 4
1
/2 4-
5
/8"
4 & 6 x 4 (2500) 6.0 12 5.313 SQ 1.75
3
/8 x 5 4-
5
/8"
6 (1500) 9 DIA 7
1
/2 DIA 2.375
5
/8 x 4 8-
1
/2"
Valves 2" - 6" x 4" need pipe or round bar for handle.
*Y = Number and size of bolts for actuator mounting.
1500 and 5000 have same dimensions.
M Stem Diameter
SF Stem Flat
Optional Actuator
Mounting Bracket for
Valve Sizes 2" - 6" x 4"
(6" & 8" x 6")
3-Way Wrench Head
Dimensions
W (SQ)
H
V
BB
W V
W
U
SD-11548-96
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
D Y N A S E A L
Weights, Stem Torques and Flow Characteristics
600 900 1500 2500 5000
Size
(in)
2 30 30 30 30 30
3 x 2 30 30 30 30 30
3 35 35 35 45 45
4 x 3 35 35 35 45 45
4 45 45 45 45 45
6 x 4 45 45 45 45 45
6 95 95 95 95
8 x 6 95 95 95 95
Worm Gear Actuator Weights (in-lbs)
Includes worm gear actuator, handwheel and mounting hardware.
Valve Bore
Size (in)
0- 275 750 1000 1500 2250 3000 3750 5000 6250
2 284 426 554 811 1195 1622 2035 2700 3534
3 381 1040 1356 1988 2935 3883 5145 6830 8996
4 637 1738 2265 3317 4896 6474 8513 11298 15575
6 1887 5146 6751 9961 14776 19591 25115 32850
Note: Multiply torque values by 1.2 for temperatures -20F to -50F.
Multiply torque values by 1.3 for elastomer seals. The torque values
listed are based on valves controlling the flow of clean ladings at
ambient temperatures. These are the maximum breakaway torques.
Running torques will generally average
1
/3 of these values. Reseating
torques will generally average
3
/4 of these values. Consult factory
when used in high flow conditions.
600 900 1500 2500 5000
Size
(in)
BW FL BW FL FL FL FL
2 50 64 55 100 118 162 120
3 x 2 70 84 85 126 198 247 198
3 82 128 90 163 256 290 256
4 x 3 90 174 100 283 342 414 342
4 171 255 150 314 450 545 464
6 x 4 173 333 170 456 563 657 563
6 390 550 190 707 800 800
8 x 6 415 645 225 836 1050
Note: Weights shown are for bare stem valves. BW = Butt Weld
FL = Flanged
CV*
2 395
3 x 2 225
3 1045
4 x 3 610
4 1875
6 x 4 895
6 4525
8 x 6 2085
Flow Characteristics (CV)
Valve
Size (in)
*Flow of water in U.S. gal/min/1 psi pressure drop.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
D Y N A S E A L
Worm Gear Actuator
Mounting Plate 10 Bore
& Larger
Mounting Bracket
4 & 6 Bore Valves
Mounting Bracket
8 Bore & Larger
Stem Gasket
Pipe Plug
Seat Ring
Ball
Tailpiece
Gasket
Tailpiece
Stem Retainer
Pin
Packing
Body
Ground
Spring
Bleed
Fitting
Compression
Ring
Bonnet Cap
Cap Screws
Stop Plate
Stem
Key Lever
(4 & 6 only)
Seat Ring
4" 12" Full Bore
6" 14" Regular Port
SD-24100
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
(p113)
Part CS CS2* S1 S8
D Y N A S E A L
Body-Tailpiece Material Codes
Standard Materials (4" Full Bore 8" Regular Port)
Body A216 Gr WCC A351 Gr CF8M
Studs A193 Gr B7 A193 Gr B7 Plated A193 Gr B8
Nuts A194 Gr 2H A194 Gr 2H Plated A193 B8
Body Drain Fitting Carbon Steel Stainless Steel
Tailpiece A216 Gr WCC or ASTMA105 A351 Gr CF8M
Packing Adjust Screw Alloy Steel Alloy Steel Plated SS
Bonnet Cap A216 Gr WCC Plated A351 Gr CF8M
*CS2 and S8to be used for H
2
S service. Used with S1 internal trim only. Meets NACE MR-01-75.
Ball-Stem Material Codes
Part CS S1 ML
Ball ASTM A105 Hard Chrome Plate 316 SS B164 Class B Ni-Cu Alloy
Ground Spring 304 SS
Stem Carbon Steel Plated 316 SS B164 Class B Ni-Cu Alloy
Compression Ring Carbon Steel Plated 303 SS
Stem Retainer Pin Carbon Steel 316 SS
Stem Retainer Pipe Plug Carbon Steel 316 SS
Seat-Seal Material Codes
Part 01 01F 02 02F 14 14F 18 28 28F 60 60A 92H
Special 316 S 316 SS
Seat TFE Filled TFE Filled Filled TFE with Stellite Chromium Oxide
TFE hard facing Coat
Seat Shim TFE TFE TFE TFE
Seat Seal
Braided
Filled TFE
Graphite
Tailpiece Gasket TFE Filled TFE
Stem Gasket TFE Filled TFE
Packing Graphite / TFE with SS cap
Part (Body)
WrenchFor All
Body Material Codes
Wrench Head Ductile Iron
Wrench Handle Carbon Steel
Wrench Handle Pin Carbon Steel
Cap Screw Alloy Steel
Stop Plate Carbon Steel
Actuator Codes (Wrenches)
Part (Body)
Worm Gear For All
Body Material Codes
Mounting Bracket Carbon Steel
Bolting Carbon Steel
Set Screw Carbon Steel
Stem Adapter Carbon Steel
Actuator As Selected
Handwheel Carbon Steel
Actuator Codes
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
D Y N A S E A L
Part CS S1 ML
Ball ASTM A105 Hard Chrome Plate 316 SS B164 Class B Ni-Cu Alloy
Ground Spring 304 SS
Stem Carbon Steel Plated 316 SS B164 Class B Ni-Cu Alloy
Compression Ring Carbon Steel ENP 303 SS
Stem Retainer Pin Carbon Steel 316 SS
Stem Retainer Pipe Plug Carbon Steel 316 SS
Part 01 01F 02 02F 14 14F 18 28 28F 60 60A 92H
Special 316 SS 316 SS
Seat TFE Filled TFE Filled Filled TFE with Stellite Chromium Oxide
TFE hard facing Coat
Seat Shim TFE TFE TFE TFE
Seat Seal
Braided
Filled TFE
Graphite
Stem Gasket TFE Filled TFE
Packing Graphite / TFE with SS cap
Part (Body) For All Body-Tailpiece Trim Codes
Mounting Bracket Ductile Iron
Adapter Plate Carbon Steel
Stem Adapter Carbon Steel
Bolting Alloy Steel
Key Carbon Steel
Set Screw Carbon Steel
Actuator As Selected
Handwheel Carbon Steel
Actuator Codes
Part CS CS2* S1 S8
Body A216 Gr WCC A351 Gr CF8M
Studs A193 Gr B7 A193 Gr B7 Plated A194 Gr B8
Nuts A194 Gr 2H A194 Gr 2H Plated A194 Gr B8
Body Drain Fitting Carbon Steel Stainless Steel
Tailpiece A216 Gr WCC A351 Gr CF8M
Packing Adjust Studs A193 Gr B7 A193 Gr B7 Plated A193 Gr B8
Packing Adjust Nuts A194 Gr 2H A194 Gr 2H Plated A194 Gr B8
Bonnet Cap A216 Gr WCC Plated A351 Gr CF8M
*CS2 and S8to be used for H
2
S service. Used with S1 internal trim only. Meets NACE MR-01-75.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
(p115)
B
E
H
S
P
T
D
A
N
Q
E
B
E
F
G
D
A
M= Stem Diameter
R= Key
Front View
Worm Gear Actuator
Front View
D Y N A S E A L
B110- Long Pattern 150 Raised Face Flanges
B113- Short Pattern 150 Raised Face Flanges
B128- Long Pattern 300 Raised Face Flanges
Full BoreLever Actuated
B134-Short Pattern 300 Raised Face Flanges
B150 300 Butt Weld
Full BoreWorm Gear Actuated
Dimensional Data (4"- 12" Full Bore)
Dimensional Data (in)
4" Flg. 150 Full Bore Stem is offset
1
6" Flg. 150 Full Bore Long Pattern Stem is offset 2
1
Butt Weld.
4" Flg. 150 Full Bore Stem is offset
1
6" Flg. 150 Full Bore Long Pattern Stem is offset 2
1
Butt Weld.
Note: Flange holes are tapped:
6" 150 Short pattern, both ends,
3
/4"10 NC
6" 150 Long pattern, body end only,
3
/4"10 NC
10" 300 Short pattern, both ends, 1"8 NC
Dimension A*
Approximate dimensions in inches
B D E F G H M N P Q R S T W V X Y Y Z
1.25 20 4 13 .25 12 10 3.5 .56 4.62 1.88 2.44
1.5 20 4 13 .38 14 12 3.5 .56 4.62 1.88 2.44
2.38 20 6 15 .62 20 17 7.75 5.75 .69 8.25 3.5 3
2.94 20 6 15 .75 23 20 7.75 5.75 .69 8.25 3.5 3
2.94 20 6 15 .75 24 21 7.75 5.75 .69 8.25 3.5 3
2.94 20 11 19 .75 26 24 7.75 5.75 .69 8.25 3.5 3
150 RF 300 RF
Long Short Long Short
B110 B113 B128 B134 B150
4 9.00 12.00 12.00 4.00 4.62 8.62 9.9 36 7.56
6 15.50 10.50 15.88 15.88 6.00 6.38 11.38 12.62 48 9.44
8 18.00 19.75 16.50 16.50 8.00 8.12 16.38 12.25
10 21.00 22.38 18.00 22.00 10.00 9.81 18.5 15.12
12
24.00 12.00 20.12 16.38
25.50 25.00 12.00 20.12 16.38
Size BW
Dimensional Data (mm)
Dimension A*
Approximate dimensions in millimeters
B D E F G H M N P Q R S T W V X Y Y Z
32 508 65 289 6 270 224 89 14 119 48 62
38 508 79 289 10 329 279 89 14 119 48 62
60 508 117 340 16 471 381 197 146 17 209 89 76
75 508 117 340 19 530 448 197 146 17 209 89 76
75 508 117 340 19 567 479 197 146 17 209 89 76
75 508 252 352 19 648 557 197 146 17 209 89 76
150RF 300RF
B110 B113 B128 B134 B150
100 229 305 305 102 117 219 251 915 192
150 394 267 403 403 152 162 289 321 915 240
200 457 502 419 419 203 206 416 318
250 533 568 457 559 254 249 470 384
300
610 305 356 511 416
648 635 305 356 511 416
Size BW
Z
W
Y'
V Y
Z
Y'
V
Y
W
Mounting Brackets
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
D Y N A S E A L
N
Q
B
E
H
S
P
T
D
A
B
E
F
G
D
A
Z
W
Y'
V Y
Z
Y'
V
Y
W
M= Stem Diameter
R= Key
Mounting Brackets
Worm Gear Actuator
Front View
Front View
B100Long Pattern 150 Raised Face Flanges
B102 Short Pattern 150 Raised Face Flanges
Regular Port Lever Actuated
B122Short Pattern 300 Raised Face Flanges
B120Long Pattern 300 Raised Face Flanges
B142300 Butt Weld
Regular Port Worm Gear Actuated
Dimensional Data (6"- 14" Regular Port)
*Centerline-to-face dimension is half of Dimension A. Butt Weld.
*Centerline-to-face dimension is half of Dimension A. Butt Weld.
Note: Flange holes are tapped:
3
/4"10 NC on:
8" 150 Short pattern, tailpiece
end only
Dimension A*
Approximate dimensions in inches
B C D E F G H M N P Q R S T W V X Y Y Z
1.25 20 4 13 .25 12 10 3.5 .56 4.62 1.88 2.44
1.5 20 4 13 .38 14 12 3.5 .56 4.62 1.88 2.44
2.38 20 6 15 .62 20 17 7.75 5.75 .69 8.25 3.5 3
2.94 20 6 15 .75 23 20 7.75 5.75 .69 8.25 3.5 3
2.94 20 6 15 .75 24 21 7.75 5.75 .69 8.25 3.5 3
2.94 20 11 19 .75 26 24 7.75 5.75 .69 8.25 3.5 3
150 RF 300 RF
B100 B102 B120 B122 B142
6 10.50 15.88 15.88 4.00 6.00 4.62 8.62 9.9 36 7.56
8 18.00 11.50 16.50 16.50 6.00 8.00 6.38 11.38 12.62 48 9.44
10 21.00 22.38 22.00 8.00 10.00 8.12 16.38 12.5
12 24.00 25.50 25.00 10.00 12.00 9.81 18.5 15.12
14
27.00 12.00 14.00 12 20.12 16.38
30.00 30.00 12.00 14.00 12 20.12 16.38
Size BW
Dimension A*
Approximate dimensions in millimeters
B C D E F G H M N P Q R S T W V X Y Y Z
32 508 65 289 6 270 224 89 14 119 48 62
38 508 79 289 10 329 279 89 14 119 48 62
60 508 117 340 16 471 381 197 146 17 209 89 76
75 508 117 340 19 530 448 197 146 17 209 89 76
75 508 117 340 19 567 479 197 146 17 209 89 76
75 508 252 352 19 648 557 197 146 17 209 89 76
150 RF 300 RF
B100 B102 B120 B122 B142
150 267 403 403 102 152 117 219 915 192 32
200 457 292 419 152 203 162 289 321 915 240
250 533 568 559 203 254 206 416 318
300 610 648 635 254 305 249 470 384
350
686 305 356 305 511 416
762 762 305 356 305 511 416
Size BW
X
X
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
(p117)
D Y N A S E A L
For All 2-Piece
Valve Size Full Bore Weight Regular Port Weight
(in) (mm) (lbs) (kg) (lbs) (kg)
4 100
150 (L) Flg 113 51
WGA WGA
300 (L) Flg 144 65
BW 94 43
150 (L) Flg 162 73
6 150
150 (S) Flg 144 65 125 57
300 (L) Flg 273 124 193 88
BW 189 86 139 63
150 (L) Flg 176 80
6 150 150 (S) Flg 158 72 133 60
WGA WGA 300 (L) Flg 239 108 190 86
BW 203 92 154 70
150 (L) Flg 388 176 217 98
8 200
150 (S) Flg 197 89
300 (S) Flg 437 198 293 133
BW 328 149 237 108
150 (L) Flg 428 194 231 105
8 200 150 (S) Flg 211 96
WGA WGA 300 (L) Flg 477 216 307 139
BW 368 167 251 114
10 250
150 (L) Flg 695 315 451 205
WGA WGA
300 (L) Flg 858 389 587 266
BW 610 277 365 166
12 300
150 (L) Flg 943 428 791 359
WGA WGA
300 (L) Flg 1262 572 971 440
BW 815 370 740 336
14 350
150 (L) Flg 985 447
WGA WGA
300 (L) Flg 1350 612
BW 1022 464
Weights (lbs-kg)
End Connection
BWE 150 FL 300 FL

Valve Size and
Port Size (in)
4 4 2100 2500 2100
6 4 790 820 800
6 6 5300
6500 (S)
5300
5400 (L)
8 6 2100
2200 (S)
2100
2200 (L)
8 8 11000
11000 (S)
10000 (L)
10 8 4200
10 10 17000
19000 (S)
17000 (L)
12 10 7400 6600 6600 (S)
12 12 25000 26000 25000
14 12 11000
Flow Characteristics (C
v
)*
*C
v
values equal the flow of water in U.S. Gallons per minute per 1 PSI
pressure drop across a fully open valve.
(S) Short Pattern.
(L) Long Pattern.
Differential Pressure
Valve Bore
Size (in)
275 500 740
4 2090 3300 4200
6 4400 8200 11200
8 9000 14000 20300
10 15000 22000 30500
12 29300 37400 46400
Seat Seal Codes 01, 01F, 14, 14F
Valve Bore
Size (in)
275 500 740
4 2400 3300 4200
6 5400 8200 11200
8 10000 15000 20300
10 16000 23000 30500
12 32000 39000 46500
Stem Torques (in-lbs)*
Seat Seal Codes 02, 02F, 18, 28, 28F
* Stem Torques (in-lbs)
Seat Seal Codes 60, 60A, 92H
Multiply trim 02 torque 2.
Note: The torques listed are based on valves controlling the flow of
clean liquid at ambient temperature. For torques at pressure less than
275 psi use the value for 275 psi. For any pressure above 275 but less
than the maximum pressure listed, interpolation may be used. These
torques are average breakaway torques for valves that have been in
the closed position for 24 to 48 hours and under the listed differential
pressures. The breakaway torque is an instantaneous value. As soon as
the ball has any movement, the torque will drop on the average to
two-thirds of this value.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
D Y N A S E A L
Standard Materials (
1
/4" Full Bore 2" Regular Port)
Part CS CS2* CS3* S1 S8
Body ASTMA105 ASTMA350 LF2 316 SS/A351 CF8M
Body Plug** CS SS
TE AISI 4130 316 SS
FE ASTMA350 LF2 316 SS/A351 CF8M
Bonnet Cap Carbon Steel Zinc Plated SS
Packing
Alloy Steel Plated 18-8 SS
Alloy Steel
18-8 SS
Adjusting Screws Plated
Tailpiece
*CS2/CS3/S8to be used for H
2
S service with S2 internal trim only.
Meets NACE MR-01-75.
**When body drain is specified.
Part CS S1 S2 ML
Ball
AISI 1213 CS
316 SS 316 SS
B 164 Class B
Chrome Plate Ni-Cu Alloy
Spring for
304 SS
Grounding Device
Stem
AISI 1213 CS
316 SS 17-4PH
B164 Class B
Zinc Plated Ni-Cu Alloy
Compression Ring
Carbon Steel
18-8 SS
Zinc Plated
Note:
1
/2" 2"R CS2/S8 Used with S2 internal trim only.
For H
2
S service per NACE MR-01-75.
When specified.
Part 01 02 03 07 18 23 28 60A* 92H*
Filled Acetal Special Filled
316 SS
Seat TFE
TFE Plastic
Viton
Filled TFE
Celcon
TFE
Stellite Chromium Oxide
Coated
Rear Seal
Hydrin
Braided
Filled TFE
O-Ring Graphite
Tailpiece Gasket TFE Filled TFE TFE Filled TFE
Stem Seal TFE Filled TFE
Packing Graphite/TFE with 316 SS Cap
*1"F and larger.
Weld end valves only.
Part (Body) CS, CS2, CS3, S1 S8
Lock Nut Alloy Steel, Plated 18-8 SS
Handle
Carbon Steel
316 SS
Zinc Plated
Handle Grip Vinyl Vinyl
Actuator Codes
AISI 1018
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
D Y N A S E A L
Part CS CS2
*
CS3
*
S1 S8
Body ASTMA105
ASTMA350 LF2
316 SS/A351 CF8M
Grade LF2
Body Plug** CS SS
Tailpiece ASTMA105 4130 316 SS/A351 CF8M
Nameplate SS
Bonnet Cap Carbon Steel Plated Stainless Steel
Packing
Alloy Steel Plated 18-8 SS
Adjusting Screws
*
CS2/CS3/S8to be used for H
2
S service.
Meets NACE MR-01-75.
**
When body drain is specified.
Part CS S1 ML
Ball CS Chrome Plate 316 SS
B164 Class B
Ni-Cu Alloy
Grounding
304 SS
Device Spring
Stem 1213 Zinc Plate 316 SS
B164 Class B
Ni-Cu Alloy
Compression
4140 CS 303 SS
Ring
Note: 2"F 4"R CS2/S8 Used with S1 internal trim only.
For H
2
When specified.
Part (Body) CS, CS2, CS3, S1, S8
Wrench Handle Ductile Iron
Wrench Head Bolt and Nut Alloy Steel
Stop Plate Retainer Ring Carbon Steel
Stop Plate Carbon Steel Zinc Plated
Actuator Codes
Part 01 02 03 07 18 23 28 60A 92H
Filled Acetal Special Filled
316 SS
Seat TFE
TFE Plastic
Viton
Filled TFE
Celcon
TFE
Coated
Rear Seal
Hydrin
Braided
Filled TFE
O-Ring Graphite
Tailpiece Gasket TFE Filled TFE TFE Filled TFE
Packing Graphite/TFE with 316 SS Cap
Weld end valves only.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
D Y N A S E A L
Dimension A Approximate dimensions in inches
B D E F G Q** R S T J W H**
B138 B110 B128 B182 B172 B103 B150
THD 150RF 300RF 600RF 600RJ SW BW
1
/4 3.00 7.00 .38 .62 1.4 2.8 4.3
5
/16-24 .184 .31 .88 .55 8-32
3
/8 3.00 .38 .62 1.4 2.8 4.3
5
/16-24 .184 .31 .88 .55 8-32
1
/2 4.00 .50 .75 1.8 3.5 5.4
7
/16-20 .246 .44 1 .72 10-24
3
/4 4.25 8.25 .75 1 1.9 3.6 5.4
7
/16-20 .246 .44 1 .75 10-24
1 4.50 5.00 6.50 8.50 8.50 1 1.25 2.8 4.1 7.0
5
/8-18 .356 .69 1.25 1.14
1
/4-20
1
1
/2 5.25 6.50 7.50 9.50 9.50 9.25 1.5 1.75 3.6 5.0 9.5
3
/4-16 .430 .78 1.5 1.34
5
/16-18
2 6.25 7.00 8.50 11.50 11.62 8.50 2 2.5 5.0 5.4 15.0 1.12 .692 .81 2.62 1.88
3
/8-16
3 10.00 8.00 11.12 11.12 3 3.5 6.4 6.6 15.0 1.12 .692 1.25 3 2.32
1
/2-13
Size
Dimension A Approximate dimensions in millimeters
B138 B110 B128 B182RF B172RJ B103 B150
6 76 178 10 16 35 70 108
5
/16-24 5 8 22 14 8-32
10 76 10 16 35 70 108
5
/16-24 5 8 22 14 8-32
15 102 13 19 44 89 146
7
/16-20 6 10 25 18 10-24
20 108 210 19 25 49 92 146
7
/16-20 6 10 25 19 10-24
25 114 127 165 216 216 25 32 71 103 178
5
/8-18 9 18 32 29
1
/4-20
40 133 165 190 241 241 235 38 44 90 127 241
3
/4-16 11 21 38 34
5
/16-18
50 159 178 216 292 295 216 51 64 127 137 381 28 18 21 67 48
3
/8-16
80 254 203 283 282 76 89 164 167 381 28 18 32 76 59
1
/2-13
Size
**American National Thread in inches.
B138 Threaded
B110 150 Raised Face Flanges
Threaded
B172 600 Ring Joint Flanges
B150 300 Butt Weld
B103 Socket Weld
Flanged
Top View
Stem
Dimensions
Stem
Dimensions
Top View
Front View
Front View
Dimensional Data (
1
/4"-3" Full Bore)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
(p121)
D Y N A S E A L
B136 Threaded
Threaded
B170 600 Ring Joint Flanges
B142 300 Butt Weld
B106 Socket Weld
Flanged
Top View Top View
Front View
Front View
Dimensional Data (
1
/2"- 4" Regular Port)
B C D E F G Q** R S T J W H**
B136 B100 B120 B114RF B170 RJ B106 B142
1
/2 3.88 7.88
3
/4 4.38
1 4.25 5.00 6.50 8.50 8.50 8.25
1
1
/2 6.50 7.50 9.50 9.50
2 6.25 7.00 8.50 11.50 11.62 10.25
2
1
/2 8.50 7.50 9.50
32 8.00 11.12 14.00 14.12
4 12.00 9.00 12.00 17.00 17.12 12.00
Size
.38 .5 .62 1.4 2.8 4.3
5
/16-24 .184 .31 .88 .55 8-32
.5 .75 .75 1.8 3.5 5.8
7
/16-20 .246 .44 1 .72 10-24
.75 1 1 1.9 3.6 5.8
7
/16-20 .246 .44 1 .75 10-24
1 1.5 1.5 3.0 4.3 7.0
5
/8-18 .356 .69 1.25 1.16
1
/4-20
1.5 2 1.75 3.6 5.0 7.5
3
/4-16 .430 .78 1.5 1.34
5
/16-18
2 2.5 2.5 5.0 5.4 15.0 1.12 .692 .81 2.62 1.88
3
/8-16
2 3 2.5 5.0 5.4 15.0 1.12 .692 .81 2.62 1.88
3
/8-16
3 4 3.5 6.4 6.6 15.0 1.12 .692 1.25 3 2.31
1
/2-13
B136 B100 B120 B114 RF B170 RJ B106 B142
15 98 200
20 111
25 108 127 165 216 216 210
40 133 165 190 241 241
50 159 178 216 292 295 260
65 216 190 241
8050 203 282 356 359
100 305 229 305 432 435 305
Size
9 13 16 35 70 108
5
/16-24 4 8 22 14 8-32
13 19 19 44 89 146
7
/16-20 6 11 25 18 10-24
19 25 25 49 92 146
7
/16-20 6 11 25 19 10-24
32 38 38 76 108 178
5
/8-18 9 18 32 29
1
/4-20
38 51 44 90 127 190
3
/4-16 10 20 38 34
5
/16-18
51 64 64 127 137 381 28 17 21 67 48
3
/8-16
51 76 64 127 137 381 28 17 21 67 48
3
/8-16
76 102 89 164 167 381 28 17 32 76 59
1
/2-13
Stem
Dimensions
Stem
Dimensions
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
D Y N A S E A L
Weight
Valve Size
(in)
Full Bore Regular Port
End
Connection
1
/4 THD 1.5
3
/8 THD 1.5
1
/2 THD 1.5 1.5
3
/4 THD 3.25 2
THD 5 3
1
150 Flg 8.5 6.5
300 Flg 12 10
SW 16 14
THD 12 8
1
1
/2
150 Flg 17 15
300 Flg 24 20
600 Flg 32 26
THD 23 12.5
150 Flg 33 23
2 300 Flg 38 25
600 Flg 47 33
BW 30
THD 29
2
1
/2
150 Flg 41
300 Flg 48
BW 36
THD 56
150 Flg 64 51
3 300 Flg 81 76
600 Flg 87 81
BW 67 61
THD 67
150 Flg 80
4 300 Flg 127
600 Flg 130
BW 85
1
/4" 4" Weight (lbs)
Weight
Valve Size
(mm)
Full Bore Regular Port
End
Connection
6 THD .68
10 THD .68
15 THD .68 .68
20 THD 1.47 .91
THD 2.27 1.36
25
20PN Flg 3.86 2.95
50PN Flg 5.44 4.54
100PN Flg 7.26 6.35
THD 5.44 3.63
40
20PN Flg 7.71 6.80
50PN Flg 10.9 9.07
100PN Flg 14.5 11.8
THD 10.4 5.67
150PN Flg 15.0 10.4
50 300PN Flg 17.2 11.3
600PN Flg 21.3 15.0
BW 13.6
THD 13.2
65
20PN Flg 18.6
50PN Flg 21.8
BW 16.3
THD 25.4
20PN Flg 29.0 23.1
75 50PN Flg 36.7 35.0
100PN Flg 39.5 36.7
BW 30.4 27.7
THD 30.4
20PN Flg 36.3
100 50PN Flg 57.6
100PN Flg 59.0
BW 38.6
6mm 100mm Weight (kg)
End Connection
Valve Size and
Port Size (in)
Threaded BWE 150FL 300FL 600FL
1
/4
1
/4 9.1
3
/8
3
/8 9.1
1
/2
3
/8 5.6
1
/2
1
/2 16.6 11
3
/4
1
/2 10.3 16 23.8
3
/4
3
/4 46.1 28 78.8
1
3
/4 28.0 25.1 52.6 22.5
1 1 94.7 89.8 89.8 68.9
1
1
/2 1 53.4 55.5 94.3
1
1
/2 1
1
/2 251 226 210 187
2 1
1
/2 122 132 127 119
2 2 486 417 459 417 358
2
1
/2 2 249 244 252 242
3 2 189
3 3 1101 1231 1044 1044 1045
4 3 518 542 550 610
v
)*
*Flow of water in U.S. gal / min/1psi Pressure Prop.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
3 1 0 C & 3 1 0 D 3 - P I E C E F L O A T I N G B A L L V A L V E S
Valve Bore
Size (in)
275 500 740
1
/4 36 36 36
3
/8 36 36 36
1
/2 60 60 60
3
/4 90 90 90
1 120 150 180
1
1
/2 240 330 420
2 500 640 810
3 1010 1800 2400
Seat Seal Codes 01, 02 (150300 Class)
Valve Bore
Size (in)
275 500 740 1000 1500 2250
1
/4 60 60 60 60 72 84
3
/8 60 60 60 60 72 84
1
/2 60 60 60 70 84 108
3
/4 128 128 145 160 215 360
1
1
/2 520 580 680 810 980 1390
2 910 1042 1240 1500 1765 2300
3 1200 1800 2400 2900 3420
Stem Torques (in-lbs)*
Seat Seal Codes 02 (Threaded, 600 Class), 18, 28
Valve
Bore
Size (in)
275 500 740 1000 1500 2000 2250 2500 3000
1
/4 50 50 50 50 50 60 75 85 100
3
/8 50 50 50 50 50 60 75 85 100
1
/2 60 60 60 72 100 120 140 180 220
3
/4 108 108 125 140 190 260 340 420 500
1 264 264 290 320 380 440 510 620
1
1
/2 480 528 610 726 895 1070 1270 1510
2 900 980 1110 1300 1520 1750 2000
3 1650 1920 2200 2510 3110 3700 4000
Seat Seal Codes 03 (High Pressure Seats)
Valve Bore
Size (in)
275 500 740 1000 1500 2000 2250 2500 3000 3500 3750 4000 4500 500
1
/4 60 60 60 60 60 65 70 85 100 115 125 130 150 165
3
/8 60 60 60 60 65 70 75 85 100 125
1
/2 70 70 70 82 110 125 140 180 220 276
3
/4 108 108 125 140 190 260 340 420 560 695
1 264 264 290 320 380 440 510 620 760
2 900 980 1100 1300 1520 1750 2000 2550 2550
Seat Seal Codes 23
* Stem Torques (in-lbs)
Seat Seal Codes 60, 60A, 92H
Full Regular Liquid 275 Dry Gas Dry Gas
Bore Bore PSI 275 PSI 740 PSI
1
/4 F
1
/2 R 36 42 113
1
/2 F
3
/4 R 60 82 220
3
/4 F 1 R 90 150 404
1 F 180 336 606
1
1
/2 F 2 R 420 840 2260
2 F 2
1
/2 R 900 1200 3230
3 F 4 R 2400 3600 9690
Seat Seal Codes 07
Multiply trim 02 torque 2.
Note: The torques listed are based on valves controlling the flow of
clean liquid at ambient temperature. For torques at pressure less than
275 psi use the value for 275 psi. For any pressure above 275 but less
than the maximum pressure listed, interpolation may be used. These
torques are average breakaway torques for valves that have been in
the closed position for 24 to 48 hours and under the listed differential
pressures. The breakaway torque is an instantaneous value. As soon as
the ball has any movement, the torque will drop on the average to
two-thirds of this value.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
3 1 0 F L O A T I N G B A L L V A L V E S
How to Order
Size
Port
Valve
Body
Seal
Ball-
Actuator
Inches
Reg=R
Type
Tailpiece
Code
Stem
Code
Full=F Code Code
2 R B 1 3 6 C S 0 2 S 1 W R
Material Code
Carbon Steel CS
316 Stainless Steel S1
Ni-Cu Alloy ML
17-4PH
S2*
See Next Page
DynaSeal 310 Ball Valves comply with the following design and
testing standards: ANSI B16.5 (Steel Pipe Flanges and Flange
Fittings), MSS-SP-6 (Standard Finishes for Pipe Flanges),
MSS-SP-25 (Standard Marking System for Valves), MSS-SP-55
(Quality Standard for Steel Castings), API 607 (Fire Test
Specification, Third Edition).
In addition, DynaSeal 310 Ball Valves can be supplied
to comply with these standards: MSS-SP-72 (Ball Valves for
General Service), ANSI B31.1 (Power Piping), ANSI B31.3
(Chemical Plant and Petroleum Refinery Piping), API 598
(Valve Inspection and Testing), MSS-SP-61 (Pressure Testing
of Steel Valves), ANSI B16.104 (Valve Seat Leakage)
DynaSeal 310 Ball Valves can be trimmed for sour gas
service in accordance with NACE MR-01-75 (latest issue) and
are available in both carbon steel and stainless steel.
Material Codes
Carbon Steel CS
Controlled hardness carbon steel
CS2*
for H
2
S service
Same as CS2, but special for -50F service
CS3*
316 stainless steel for wetted parts
S1
316 stainless steel with stainless steel
S8
external trim. Good for -50F.

*Meets NACE specification MR-01-75.
Meets NACE specification MR-01-75 in 3 bore size and smaller.
*NACE 2R and smaller. 17-4 PH Stem,
316 Stainless Steel Ball
Actuator Code
Wrench WR
Oval Handwheel OH
Worm Gear
WGA
Bare Stem
BS
Less Gear
L/G
Seal
Seal Material
Tailpiece Gasket
Code Material
01 TFE TFE
01F TFE TFE
02 Filled TFE TFE
02F Filled TFE TFE
03 Delrin/Hydrin
TM
TFE
07 Viton
TM
TFE
14 Filled TFE TFE
14F Filled TFE TFE
18 HPT-2 Filled TFE
23 Celcon
TM
TFE
60 Stellite
TM
Filled TFE
60A Stellite
TM
Filled TFE
92H 316SS with chrome oxide and Filled TFE Filled TFE
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Note: Threaded end valves have NPT internal pipe threads in full con-
formance with ANSI B2.1 and Federal Thread Handbook H-28.
Note: R - Regular Port, F - Full Port, SP - Short Pattern, LP - Long Pattern
Size (in)
Socket
Weld
Butt
Weld
Male
Thread
Female
Thread
1
/4 F B138 B138 B103
3
/8 F B138
1
/2 R B136 B136 B106
1
/2 F B138
3
/4 R B136
3
/4 F B138 B138 B103
1 R B136 B136 B106
1 F B138
1
1
/2 F B138 B103
2 R B136 B106
2 F B138 B150
3 F B138 B150
4 R B136 B142
310C 3-Piece Valve Types (Threaded, Welded)
Size (in) 150RF 300RF
150RF 300RF
Size (in)
LP SP LP
4 F B110 B128 B150
6 R B102 B120 B142
6 F B110 B113 B128 B150
8 R B100 B102 B122 B142
8 F B110 B128 B134 B150
10 R B100 B120 B142
10 F B110 B128 B134 B150
12 R B100 B120 B142
12 F B110 B128 B150
14 R B100 B120 B142
310C 2-Piece Valve Types
310C 3-Piece Valve Types (Flanged)
310D Unibody and 2-Piece Valve Types
*
1
/2 F B112 B130
*
3
/4 R B102 B122
*1 R B102 B122
*1 F B112 B130
*1
1
/2 R B102 B122
1
1
/2 F B112 B130
*2 R B102 B122
2 F B112 B130
*3 R B102 B122
3 F B112 B130
*4 R B102 B122
300BW
SP
Size (in) 150RF 300RF 600RF 600RJ
*Unibody Design.
1 R B100 B120 B114 B170
1 F B110 B128 B182 B172
1
1
/2 R B100 B114 B170
1
1
/2 F B110 B128 B182 B172
2 R B100 B120 B114 B170
2 F B110 B128 B182 B172
3 x 2 B100 B120 B114 B170
3F B110 B128 B182 B172
4 x 3 B100 B120 B114 B170
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
The chart below is an abbreviated guide to the chemical resis-
tance and pressure-temperature limitations of the seal materials
used in DynaSeal 310 Ball Valves. When in doubt about the
trim selection consult your DynaSeal distributor or the factory.
Trim Guidelines for all 310 Series Valves
Seal Seat Tailpiece
Service Application
Code Material Gasket
01 TFE TFE Seat and tailpiece gaskets are of virgin TFE. Use where lading contamination from
glass or other fillers is not desirable, such as in food service. Recommended for low
temperature service to -50F. Also recommended for vacuum service.
01F TFE TFE Fire tested trim for 2-piece design valves. Same seat materials as 01 trim, but with
special fire tested seat. 4" and larger bore size.
02 Filled TFE TFE Seat material is TFE filled with inert materials for use at elevated temperatures and
pressures. Same chemical resistance as Virgin TFE except slightly affected by hot
concentrated alkaline solutions. Some chlorinated compounds can cause swelling.
Also recommended for low temperature service -50F. Good for vacuum service.
Fire tested seals for 3-piece valves.
02F Filled TFE TFE Fire tested trim for 2-piece design valves. Same seat material 02 but with special fire
tested seat. 4" and larger bore size.
03 Delrin
Hydrin
TFE For general use at high pressures at temperatures less than 180F.
07 Viton
/SS TFE High and low pressure block and bleed. General use for low pressure & abrasion
resistance. Not suitable for steam. Good for vacuum service.
14 Filled TFE TFE Same as 02, except for 6" and larger valves for temperatures above 250F.
14F Filled TFE TFE Fire tested trim for 2-piece design valves. Same seat material as 14, but with fire
tested seat. 4" and larger bore size.
18 HPT-2 Filled TFE HPT-2 is a special TFE formulation for use at temperatures above 02 capability. Best suit-
ed for constant temperature or constant pressure applications. Proven service in steam,
hot oil, heat-transfer fluids, hot resins, boiler feed water. Same chemical
resistance as TFE. Slightly affected by hot, concentrated alkaline solutions. Some
fluorinated compounds cause swelling.
23 Celcon
TFE For use in high pressure applications. Temperature limited to 225F.

28 Filled TFE Filled TFE Same as 02 except tailpiece gasket is filled TFE. Used on weld-end valves.
60 Stellite Filled TFE Special Stellite seats for digester blowdown service, spent liquor and steam applica-
tions common to the pulp/paper industry. Leakage Class V.
60A Stellite Filled TFE Special Stellite seats for use when hard faced metal seats are required for applications
outside the pulp and paper industry.
92H 316 SS with Filled TFE For temperature to 600F. For slurries, abrasives, steam, hot water.
Chrome Oxide Leakage Class V.
and Filled TFE
Note: Trim 07 and 18 should be tested for each application by actual use. Trim sizes smaller than 1
1
2" in trims 07 are 100% elastomeric.
Sizes 1
1
2" and larger are elastomeric with a metal insert.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
DynaSeal 310 Ball Valves are rated for high performance and long
life. The ratings shown here are based on tests which indicate
good seat performance and acceptable wear. This rating is deter-
mined by the lower of the valves maximum body pressure or
seat rating. The seat rating is the maximum differential pressure
to which the valve should be subjected on a continuous basis.
Seal codes 01, 02 and 07 are suitable for vacuum service to 20
microns, absolute (minimum temperature 0F).
Pressure/ Temperature for all 310 Series Valves
Valve Bore Size (in)
Temp F
1
/4
3
/4 11
1
/2 2 3 4 6 12
-50 to 100 1500 1000 750 600 285
200 1500 1000 750 600 285
250 1400 900 700 550 150
300 1100 650 500 425 50
350 600 375 300 250
400 100 100 100 100
Temp F
6 12
-50 to 225 740
250 675
300 550
350 410
400 300
450 175
500 65
Temp F
1 2
1
/2
3
/4
1
/4
3
/8
-50 to 100 5000 3750 3000
150 5000 3000 2200
200 3250 2000 1440
225 2500 1500 1000
Temp F
3 2
1
/4 1
1
/2
-20 to 300 740* 500* 285*
350 500 350 200
400 250 190 100
450 -0- -0- -0-
Temp F Trim 60 Trim 92H
-50 to 100 740 740
150 707 710
200 675 680
250 665 675
300 655 650
350 645 575
400 635 475
450 617 375
500 600 275
550 575 200
600 550 100
Temp F
1
/4 1
1
/2 2 3 4 6 12
-50 to 100 2250 2250 1500 740 740
200 2000 1350 1300 740 740
250 1775 1150 1150 740 675
300 1500 975 950 740
350 1225 800 800 590
400 950 640 600 450
450 700 475 400 325
500 450 300 200 200
*Block and Bleed Range.
Trims 02, 02F, 03, 14, and 14F are preferred for temperature ranges
indicated by +.
Seal Code 07
Seal Code 60, 60A, 92H
Seal Code 23
Temp F
1
/4
3
/4 1 1
1
/2 2 3
-50 to 100 3000 2500 2300 1440
150 2250 2250 2250 1240
180 1550 1550 1550 600
Seal Code 03
Temp F
1
/4 1
1
/2 2 3 4 6 12
-50 to 100 + + + +
150 + + + +
200 + + + +
250 1775 1250 + +
300 1650 1175 740 600
350 1575 1075 700 500
400 1500 1000 650 400
450 1300 875 600 300
500 1075 725 550 200
550 850 600 500 100
600 350 100 75 -0-
625 100 -0- -0- -0-
Seal Code 18
Seal Code 14, 14F Seal Code 01, 01F
Seal Code 02, 02F, 28, 28F
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
3 1 0 C F L O A T I N G B A L L V A L V E S
These are maximum working pressure ratings for the valve body
assembly at various temperatures. Practical pressure limitations
according to actual service conditions are determined by the seal
and tailpiece gasket materials.
Flanged Valves
Body Material Codes
Temp F
CS, CS2 & CS3 S1 & S8
Valve Class 150 300 600 150 300 600
-20 to 100 285 740 1480 275 720 1440
150 272 707 1415 257 670 1340
200 260 675 1350 240 620 1240
250 245 665 1332 227 590 1180
300 230 655 1315 215 560 1120
350 215 645 1292 205 537 1075
400 200 635 1270 195 515 1030
450 185 617 1235 182 497 992
500 170 600 1200 170 480 955
550 155 575 1147 155 465 930
600 140 550 1095 140 450 905
Maximum Working PressuresPSIG
Body trim code S8 and CS3 are suitable for service to -50F. All
other trims are limited to operating temperatures no lower than
-20F. These pressure-temperature ratings are in conformance
with ANSI B16.5, B16.34.
Threaded Valves
Body Material Codes
Temp C
CS, CS2, CS3 S1 & S8
Valve Class 20PN 50PN 100PN 20PN 50PN 100PN
-29 to 38 20 51 102 19 50 100
66 19 49 98 18 46 92
93 18 47 93 17 43 86
121 17 46 92 16 41 81
149 16 45 91 15 39 77
177 15 44 89 14 37 74
204 14 44 88 13 36 71
232 13 43 85 13 34 68
260 12 41 83 12 33 66
288 11 40 79 11 32 64
316 10 38 75 10 31 62
Maximum Working PressuresBars (1 Bar = 14.5 PSI)
Body Material Codes
Temp F
CS, CS2 & CS3 S1 & S8
Valve Bore
1
/4
3
/8
1
/2
3
/4 1 2 3 4
1
/4
3
/8
1
/2
3
/4 1 2 3 4
Size (in)
-20 to 100 5000 3750 3000 740 5000 3750 3000 720
150 5000 3000 2300 707 5000 3000 2300 670
200 4550 2730 2025 675 4300 2575 1860 620
250 4490 2690 1997 665 4090 2450 1770 590
300 4430 2650 1970 655 3880 2325 1680 560
350 4350 2605 1935 645 3720 2330 1610 537
400 4275 2560 1900 635 3560 2140 1540 515
450 4155 2490 1847 617 3435 2065 1487 497
500 4040 2425 1795 600 3310 1990 1435 480
550 3865 2315 1717 575 3220 1930 1395 465
600 3690 2210 1640 550 3130 1875 1355 450
Maximum Working Pressures PSIG
Body Material Codes
Temp C
CS, CS2 & CS3 S1 & S8
Valve Bore
6 10 15 20 25 50 76 100 6 10 15 20 25 50 76 100
Size (mm)
-29 to 38 345 259 207 51 345 259 207 50
66 345 207 159 49 345 258 159 46
93 314 188 140 47 297 178 128 43
121 310 186 138 46 282 169 122 41
149 306 183 136 45 268 160 116 39
177 300 180 133 44 257 154 111 37
204 295 177 131 44 246 148 106 36
232 287 172 127 43 237 142 103 34
260 279 167 124 41 228 137 99 33
288 267 160 118 40 222 133 96 32
316 254 152 113 38 216 129 93 31
Maximum Working PressuresBars (1 Bar = 14.5 PSI)
Pressure/ Temperature Limits for all 310C Valves
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
SD-24096
Stem Seal
Stem
Seat Ring
Tailpiece
Tailpiece
Gasket
Body
Ball
Seat Ring
Tailpiece
Gasket
Tailpiece
Handle
Lock Nut
Packing
Cap Screws (2)
Bonnet Cap
Compression Ring
1
/4" 1
1
/2" Full Bore
1
/2" 2" Regular Port
Lever
Stop Plate
Locking Plate
Packing Ring
Stem Seal
Stem
Seat Ring
Tailpiece
Tailpiece
Gasket
Body
Ball
Seat Ring
Tailpiece
Gasket
Tailpiece
Retainer Ring
Cap Screws (2)
Bonnet Cap
Compression Ring
2" 3" Full Bore
2
1
/2" 4" Regular Port
SD-24095
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Lock Nut
Bonnet Cap
Compression Ring
Body
Handle
Cap Screws
Packing
Tailpiece Gasket
Seat Ring
Stem
Stem Gasket
Seat Retainer
Seat Ring
Ball
Packing
Bonnet Cap
Body
Seat Ring
Ball
Seat Ring
Tailpiece
Lever
Stop Plate
Tailpiece Gasket
Stem Seal
Compression
Ring
Cap Screws
Retainer Ring
Stem
SD-24099
Unibody Ball Valve Parts Detail
2-Piece Ball Valve Parts Detail
SD-24098
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Standard Materials (Unibody and 2-Piece)
Body-Tailpiece/Seat Retainer Material Codes
Part CS CS2
*
S1 S8
Body ASTM A216 WCC ASTMA351 Gr CF8M
Body Plug ASTM A105 316 SS
Tailpiece 2 Piece ASTMA216 GR WCC ASTMA351 Gr CF8M
Seat
Unibody AISI 1018 316 SS
Retainer
Bonnet Cap Carbon Steel Zinc Plated 316 SS
Packing Adjusting
Alloy Steel Plated 18-8 SS Alloy Steel Plated 18-8 SS
Screws
Note:
1
/2"2"R CS2/S8 Used with S2 internal trim only.
For H2S service per NACE MR-01-75.
2"F 4"R CS2/S8 Used with S1 internal trim only.
For H2S service per NACE MR-01-75.
Part CS S1 ML S2
Ball
AISI 1213
316 SS*
B164 Class B
316 SS
Hard Chrome Plate Ni-Cu Alloy
Spring for
304 SS
Grounding Device
Stem
AISI 1213
316 SS
B164 Class B
17-4 PH
Zinc Plated Ni-Cu Alloy
Compression Ring
Carbon Steel
18-8 SS
Zinc Plated
When specified.
*Chromium Oxide Coated when seat-seal code 92H specified.
Part 01 02 07 18 60A
*
92H
*
Special
316 SS
Seat TFE Filled TFE Viton
Filled TFE
Coated
Rear Seal
Braided
Filled TFE
Graphite
Packing TFE
**
Graphite Packing
*1"F and larger (60A supplied with 316SS ball, 92H supplied with
Chromium Oxide Coated 316SS Ball).
**
3
/4"and smaller Graphite Packing.
Part (Body) CS, CS2, S1 S8
Lock Nut Alloy Steel, Plated 18-8 SS
Handle
Carbon Steel
316 SS**
Zinc Plated
Handle Grip Vinyl Vinyl
Actuator Codes
**2"R and smaller SS, 2F and larger alloy steel.
2"R and smaller only.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
B102-Regular Port 150 Raised Face Flanges
B112 -Full Bore 150 Raised Face Flanges
Regular Port /Full Bore
B122-Regular Port 300 Raised Face Flanges
B130-Full Bore 300 Raised Face Flanges
Regular Port
Top View
(All sizes except
3"R and 4"R)
Stem
Dimensions
Stem
Dimensions
Top View
(3"R and 4"R only)
Front View
Front View
Dimensional Data (Unibody)
150Flg 300Flg 150Flg 300Flg
B102 B122 B112 B130
1
/2 F
4.25 .50 .50 1.75 1.8 3.5 5.8
7
/16-20 .246 .41 1.00 .72 10-24 .38 DP
5.50 .50 .50 1.38 1.8 3.5 5.8
7
/16-20 .246 .41 1.00 .72 10-24 .38 DP
3
/4 R
4.62 .50 .75 1.94 1.8 3.5 5.8
7
/16-20 .246 .41 1.00 .72 10-24 .31 DP
6.00 .50 .75 2.31 1.8 3.5 5.8
7
/16-20 .246 .41 1.00 .72 10-24 .31 DP
1 R
5.00 .75 1.00 2.13 2.3 4.0 6.7
7
/16-20 .246 .48 1.00 .84 10-24 .25 DP
6.50 .75 1.00 2.44 2.3 4.0 6.7
7
/16-20 .246 .48 1.00 .84 10-24 .25 DP
1 F
5.00 1.00 1.00 2.13 2.8 4.3 7.8
5
/8-18 .356 .58 1.25 1.02
1
/4-20 Thru
6.50 1.00 1.00 2.44 2.8 4.3 7.8
5
/8-18 .356 .58 1.25 1.02
1
/4-20 Thru
1
1
/2 R
6.50 1.00 1.50 2.50 2.8 4.3 7.8
5
/8-18 .356 .58 1.25 1.02
1
/4-20 Thru
7.50 1.00 1.50 3.06 2.8 4.3 7.8
5
/8-18 .356 .58 1.25 1.02
1
/4-20 Thru
2 R
7.00 1.50 2.00 3.00 3.6 5.3 8.5
3
/4-16 .430 .64 1.50 1.21
5
/16-18 Thru
8.50 1.50 2.00 3.25 3.6 5.3 8.5
3
/4-16 .430 .64 1.50 1.21
5
/16-18 Thru
3 R
8.00 2.00 3.00 3.75 5.0 5.4 15.0 1.12 .692 .81 2.66 1.88 .44 Thru
11.12 2.00 3.00 4.13 5.0 5.4 15.0 1.12 .692 .81 2.66 1.88 .44 Thru
4 R
9.00 3.00 4.00 4.50 6.4 6.6 15.0 1.12 .692 1.21 3.00 2.32 .56 Thru
12.00 3.00 4.00 5.00 6.4 6.6 15.0 1.12 .692 1.21 3.00 2.32 .56 Thru
Size
Unibody Dimensional Data (in)
150Flg 300Flg 150Flg 300Flg
B102 B122 B112 B130
13 F
108 13 13 44 46 89 147
7
/16-20 6 10 25 18 10-24 .38 DP
140 13 13 44 46 89 147
7
/16-20 6 10 25 18 10-24 .38 DP
19 R
117 13 19 49 46 89 147
7
/16-20 6 10 25 18 10-24 .31 DP
152 13 19 49 46 89 147
7
/16-20 6 10 25 18 10-24 .31 DP
25 R
127 19 25 54 58 102 170
7
/16-20 6 12 25 21 10-24 .25 DP
165 19 25 54 58 102 170
7
/16-20 6 12 25 21 10-24 .25 DP
25 F
127 13 13 54 72 109 198
5
/8-18 9 15 32 26
1
/4-20 Thru
165 13 13 54 72 109 198
5
/8-18 9 15 32 26
1
/4-20 Thru
48 R
165 25 38 64 71 109 198
5
/8-18 9 15 32 26
1
/4-20 Thru
191 25 38 64 71 109 198
5
/8-18 9 15 32 26
1
/4-20 Thru
51 R
180 38 51 76 91 135 216
3
/4-16 11 16 38 31
5
/16-18 Thru
216 38 51 76 91 135 216
3
/4-16 11 16 38 31
5
/16-18 Thru
76 R
203 51 76 95 127 137 381 28 18 21 68 48 .44 Thru
282 51 76 95 127 137 381 28 18 21 68 48 .44 Thru
102 R
229 76 102 114 163 168 381 28 18 21 76 59 .56 Thru
305 76 102 114 163 168 381 28 18 21 76 59 .56 Thru
Size
Unibody Dimensional Data (mm)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Stem Dimensions
Front View
B112- Full Bore 150 Raised Face Flanges
B130- Full Bore 300 Raised Face Flanges
Full Bore
Dimensional Data (2-Piece)
1
1
/2 F
6.50 1.50 2.50 3.6 5.3 8.5
3
/4-16 .430 .64 1.50 1.21
5
/16-18
7.50 1.50 3.06 3.6 5.3 8.5
3
/4-16 .430 .64 1.50 1.21
5
/16-18
2 F
7.00 2.00 3.00 5.0 5.4 15.0 1.12 .692 .81 2.66 1.88
1
/2-13
8.50 2.00 3.25 5.0 5.4 15.0 1.12 .692 .81 2.66 1.88
1
/2-13
3 F
8.00 3.00 3.75 6.4 6.6 15.0 1.12 .692 1.25 3.00 2.32
1
/2-13
11.12 3.00 4.13 6.4 6.6 15.0 1.12 .692 1.25 3.00 2.32
1
/2-13
Approximate dimensions in inches Dimension A
Size 150 Flg 300 Flg
B112 B130
2-Piece Dimensional Data (in)
38 F
165 38 64 91 135 216
3
/4-16 11 16 38 31
5
/16-18 Thru
191 38 64 91 135 216
3
/4-16 11 16 38 31
5
/16-18 Thru
51 F
165 51 76 127 137 381 28 18 21 68 48
1
/2-13
216 51 76 127 137 381 28 18 21 68 48
1
/2-13
76 F
203 76 95 163 168 381 28 18 40 76 59
1
/2-13
282 76 95 163 168 381 28 18 40 76 59
1
/2-13
Approximate dimensions in millimeters Dimension A
Size 150 Flg 300 Flg
B112 B130
2-Piece Dimensional Data (mm)
End Connection
Valve Size and
Port Size (in)
150FL 300FL
1
/2
1
/2 16.6 16.6
3
/4
1
/2 23.8 23.8
1
3
/4 25.1 25.1
1 1 89.8 89.8
1
1
/2 1 53.4 53.4
1
1
/2 1
1
/2 226 180
2 1
1
/2 132 127
2 2 469 417
3 2 189 189
3 3 1040 1040
4 3 542 550
v
)*
*Flow of water in U.S. gal / min/1psi Pressure Prop.
End Connection
Valve
Size
Pounds Kilograms
150CL 300CL 150CL 300CL
1
/2 F 3.8 5.0 1.7 2.3
1 R 6.3 8.8 2.9 4.0
1 F 8.5 12 3.9 5.4
1
1
/2 R 12 18 5.4 8.2
1
1
/2 F 17 24 7.7 11
2 R 19 24 8.6 11
2 F 35 45 16 20
3 2 39 51 18 23
3 F 64 86 29 39
4 R 64 94 29 43
Weights (with Lever)
Top View
Top View
1
1
/2 F
2
1
/3 F
2 holes open, 2 holes used for bonnet cap - see diagram top of page.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
DynaSeal 210A Ball Valves comply with the following design
and testing standards: MSS-SP-25 (Standard Marking System
for Valves), API 607 (Fire Test Specification, Third Edition),
MSS-SP-72 (Ball Valves for General Service).
DynaSeal 210A Ball Valves can be trimmed for sour gas
service in accordance with NACE MR-01-75 (latest issue).
Floating Ball Valve Parts Detail
(2"R-B236 shown)
Body
Grease Fitting
(optional)
Seat Ring
Ball
Seat Ring
Tailpiece
Gasket
Tailpiece
Locking Plate
Handle (optional)
Lock Nut
How to Order
Size
Port
Valve Pressure
Body
Seat Seal
Ball- Grease
Actuator
Inches
Reg=R
Type Rating
Tailpiece
Code Code
Stem Fitting
Code
Full=F Code Code Code
X X X X DI X X X X X
Size (in) Female Thread
1 F B238
2 R B236
2 F B238
3 R B236
3 F
*
B238
4 R
*
B236
Description Code
No Handle (Bare Stem) BS
Handle HL
No Handle w/Seal Pin BSP
Handle w/Seal Pin HLP
Pressure Rating (WP)
1000
*
1500
2000
*
Material Code
Carbon Steel CS
Stainless Steel SS
Material Code
Filled TFE 02
Delrin/Buna O-Ring 03
Material Code
Buna B
Viton V
Ductile Iron F=with
N=without
Stem O-Rings
Stem
Seal
Stem
*NOTE: 3"F (B238) and 4"R (B236) max
pressure 1500 PSI with O3 (Delrin) seat.
These sizes with O2 (Filled TFE) seat are
available for max pressure of 1000 PSI. For
2", 3" and 4" Reduced Port, 1000 PSI rated
pressures, see W-K-M 210L Ball Valves.
SD-24092
Example: 2"RP 1500 PSI Std trim valve: 2R-B236-1500-DI-03-B-F-HL
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Standard Materials
Part Material
Body/Tailpiece ASTM A395 Ductile Iron
Grease Fitting Carbon Steel
(CS) AISI 1213 Carbon Steel, Hard Chrome Plated
(SS) 316 SS
(CS) AISI 1213 Carbon Steel, Zinc Plated
(SS) 316 SS (
1
/2" and 1" bore 17-4 PH SS)
02 Filled TFE
03 Acetal Plastic (with Buna N Rear Seal)
Tailpiece Gasket PTFE
Stem Seal Filled TFE
(B) Buna N
(V) Viton
Handle 1
1
/2" and 1" Bore Carbon Steel, Zinc Plated w/ Vinyl Grip
2" and 3" Bore Ductile Iron
Lock Nut Alloy Steel, Plated (1
1
/2" and 1" bore valves)
*For H
2
S service use Trim Code DI-02-V-SS. Meets NACE MR-01-75.
Valve Bore Size (in)/Pressure (psi)
Temp F
3 2
3
/4 1
1
/2
50 100 2250 2250 1500
200 2000 1350 1350
250 1775 1150 1150
300 1500 975 975
350 1225 800 800
Seat Seal Codes 02
Pressure/Temperature Limits
Temp F
3 2
3
/4 1
1
/2
-20 100 2500 2500 1500
180 1550 1550 1375
Seat Seal Codes 03
Weights
Valve Size (in)/Weight (lbs)
Operation
4 x 3 3 x 2 2 x 1
1
/2
w/o handle (lbs) 9.4 16.6 35.5
with handle (lbs) 9.9 19.8 38.7
Regular Port (B236)
Valve Size (in)/Weight (lbs)
Operation
3 x 3 2 x 2 1
w/o handle (lbs) 4.0 14.4 42.8
with handle (lbs) 4.5 17.6 46.0
Full Bore (B238)
Ball
Stem
Seat
Stem O-Ring
Handle
Front View Side View Front View Side View
Dimension A Approx. dim. in inches
Size
B236 B238 B
1 F 4.00 1.00 1.00 2.77 4.0 7.1
2 R 5.55 1.50 2.00 3.56 4.9 7.1
2 F 6.00 2.00 2.00 4.50 4.9 15.0
3 R 7.25 2.00 3.00 4.50 4.9 15.0
3 F 8.75 3.00 3.00 5.66 6.0 15.0
4 R 8.75 3.00 4.00 5.66 6.0 15.0
C E G F
Regular Port (B236) Full Bore (B238)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
D U C T I L E
W-K-M, the leading supplier of valves to the
gas utility industry, introduces its mainte-
nance-free floating Ductile Ball Valve as the
competitively-priced, smart alternative to
low pressure cast iron plug valves. Many gas
meter valves are in hard to reach locations
so valve reliability is the first
consideration.
Features & Benefits
u The W-K-M 210D Ductile Ball Valve
needs no lubrication, eliminating costs
and storage requirements associated
with grease purchases and grease guns.
u Its virtually maintenance-free operation
results in less downtime and makes it
the ideal valve to replace gas meter
plug valves with their high-maintenance
requirements and sealing problems.
u Using the highest grade of ductile iron,
the 210D is proven tough with strength
approaching that of carbon steel,
offering raised face flanged ends as
standard (with flat face flanged ends as
an option), and is available in standard
carbon steel trim or stainless steel trim,
meeting NACE Standard MR-01-75,
latest edition, requirements.
u The 210 D provides locking capability
in either the valve open or valve
closed position as standard to ensure
safety.
u And as with all W-K-M DynaSeal ball
valves, the 210D offers deep pocketed
seats to surround and protect the seat
on all sides, contributing to longer
service life; superior dual stem seal
design further protects against line
media, prevents stem seizure and
reduces torque; and, of course, only
W-K-M can provide Cooper Cameron
Valves Double C two-year warranty.
W-K-M
Ductile 210D Floating Ball Valve
ITEM MATERIAL MATERIAL
Body ASTM A395 Ductile Iron
Seat Retainer AISI 1020 Steel or ASTM A395 Ductile Iron
210D Body Seat Retainer Materials
210D Ball Materials
ITEM
MATERIAL MATERIAL
CS TRIM SS TRIM
Ball
AISI 1213
316 SS
Hard Chrome Plate
Stem (3 & 4)
AISI 1213
316 SS
Zinc Plated
Stem (2)
AISI 1213
17-4PH
Zinc Plated
210D Seat Seal Material Code
Series 125/150
ITEM
MATERIAL MATERIAL
02 TRIM 03 TRIM
Seat Ring Filled TFE Delrin
Tail Piece Seal TFE TFE
Stem Packing Viton Buna
Stem Gasket Filled TFE Filled TFE
DIM SIZE
2R 3R 4R
A 7.00 8.00 9.00
B 3.33 4.47 5.64
C 6.00 7.50 9.00
Viton
and Delrin
are registered trademarks of E. I. Dupont de Nemours & Company

A
C
B
Class 125 (FF) Flat Face Class 150 (RF) Raised Face
Spring pin shown out of section
CONTACT
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
HELP
2 1 0 L F L O A T I N G B A L L V A L V E S
How to Order (Example: Std trim 2" 24925-2131100)
Base Part
Pressure
Body Seat Seal Ball & Grease
Number
Rating
Material Trim Material Stem Fitting
Handle
(CWP)
XXXXX 2 1 X X X X X
Ductile Iron
Line pipe 1
Threaded End
Carbon Steel 1
Stainless Steel 2
Carbon Steel Undirectional 3
Stainless Steel Undirectional 4
Nylon
1
(4 3 only)
Reinforced Teflon 2
Delrin/ Buna-N O-Ring
3
(2 1
1
/2 & 3 2)
No Fitting 0
Grease Fitting 1
No Handle
w/ Seal Pin
2
Handle
3
w/Seal Pin
Buna 1
Viton 2
1000 psi 2
Valve Size Part Number
2 1-1/2 24925
3 2 24926
4 3 24927
R
13
12
12
Optional 2 x 1-1/2 handle
Optional 3 x 2 handle
Optional 4 x 3 handle
FLOW INDICATOR ARROW FOR
UNIDIRECTIONAL ASSEMBLIES
(Arrowhead one end only.)
2" and 3" RP
B
16
11
14 OPTIONAL
GREASE FITTING
4" RP
12
A
5
17
9
4
8
2
C
7
5
1
6 3
Delrin/Buna seat detail
(2", 3" RP only)
Relief Hole, unidirectional
freeze tolerant assemblies only.
Ball is installed so that hole is upstream
when valve is closed (body side installed upstream).
(4 x 3)
6
NON DIRECTIONAL ASSEMBLIES
(Arrowhead both ends.)
UNIDIRECTIONAL ASSEMBLIES
(Arrowhead one end only.)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
2 1 0 L F L O A T I N G B A L L V A L V E S
Dimensional Data (inches)
Dimension
Valve Size
2 1
1
/2 3 2 4 3
A 5.55 7.25 8.74
B
No Handle 3.56 4.50 5.50
With Handle 4.86 4.94
C 1.50 2.00 3.00
R 7.06 15.00 21.56
Weight (lbs)
Dimension
Valve Size
2 1
1
/2 3 2 4 3
No Handle 9.4 16.6 29.1
With Handle 9.9 19.8
Ref.
Reqd. Description Material
No.
Parts List
1 1 Body (LPT) (1)
*
Ductile Iron ASTMA395
2 1 Adapter (LPT) (1) Ductile Iron ASTMA395
3 1
Ball, Non-Unidirectional
(1) Carbon Steel, Chrome Plated
or Unidirectional
(2) 316 Stainless Steel
4 1 Stem
(1) Steel AISI 1213/1215, Zinc Plated
(2) 316 SS (17- 4 PH SS on 2 1
1
/2)
(3) Delrin
5 2 Seat Ring (1) Nylon (4 x 3)
(2) Teflon
6 1 Body Seal Teflon
7 2 Stem Seal
(1) Buna-N
(2) Viton
8 1 Stem Gasket (Thrust Bearing) Teflon
9 1 Stop Plate Steel 1018 / 26
10 1 Stop Plate Retaining Ring Spring Steel
11 1 Stop Pin Spring Steel
12 1 Handle
2 1
1
/2 & 4 3: Carbon Steel, Zinc Plated
3 2: Ductile Iron ASTMA395
13 1 Handle Retaining Nut Steel
14 1 Grease Fitting Steel
15 1 Label Adhesive Backed Mylar
16 1 Seal Pin Assembly Brass
17 2 Rear Seal, with Delrin Seat (2" & 3") (3) Buna-N
Pressure/Temperature limits see DynaSeal 210A, page 127
*Part # option code ().
4x3 valves, body seal switched from Buna N to Teflon midyear 1998.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Floating Ball Valve Parts Detail
How to Order
Size
150RF 300RF 600RF 600RJ
Female
(in) Thread
1 R B200 B220 B214 B270
1 F B210 B228 B282 B272
1
1
/2 R B200 B214 B270
1
1
/2 F B210 B228 B282 B272
2 R B200 B220 B214 B270 B236
2 F B210 B228 B282 B272 B238
3 R B200 B220 B214 B270
3 F B210 B228 B282 B272
4 R B200 B220 B214 B270
Material Code
Carbon Steel CS
Stainless Steel S1
Stainless Steel
S2
NACE
Seat Material
02 Filled TFE
03 Delrin/Hydrin O-Ring
33 Delrin/Hydrin O-Ring
Material Code
Carbon Steel CS
Carbon Steel NACE CS2
Actuator Code
Wrench WR
Bare Stem BS
SD-24093
DynaSeal 210F Ball Valves comply with the following design
and testing standards: ANSI B16.5 (Steel Pipe Flanges and
Flange Fittings), MSS-SP-6 (Standard Finishes for Pipe
Flanges), MSS-SP-25 (Standard Marking System for Valves),
MSS-SP-55 (Quality Standard for Steel Castings), API 607
(Fire Test Specification, Third Edition), MSS-SP-72 (Ball
Valves for General Service), MSS-SP-61 (Pressure Testing
of Steel Valves).
DynaSeal 210F Ball Valves can be trimmed for sour gas
service in accordance with NACE MR-01-75 (latest issue).
Seat Ring
Ball
Seat Ring
Tailpiece
Gasket
Tailpiece
Body
Tailpiece
Gasket Tailpiece
Stem
Stem Seal
Stem O-Rings
Retainer Ring
Stop Plate
Cap Screws
Locking Plate
Lever
Size
Port
Valve
Body
Seal
Ball-
Actuator
Inches
Reg=R
Type
Tailpiece
Code
Stem
Code
Full=F Code Code
2 R B 2 0 0 C S 0 2 S 2 W R
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Standard Materials
*CS2 to be used for H
2
S service. Meets NACE MR-01-75.
Actuator Codes
Part CS, CS2
Lock Nut Alloy Steel, Plated
Handle
Carbon Steel
Zinc Plated
Handle Grip Vinyl
Part 02 03/33
Seat Filled PTFE Acetal
Rear Seal Hydrin O-Ring
Tailpiece Gasket PTFE PTFE
Stem Seal Filled PTFE Filled PTFE
Stem O-Rings Viton
Part CS S1 S2
Ball
AISI 1213
316 SS 316 SS
Hard Chrome Plated
Stem
AISI 1213
316 SS 17-4PH
Zinc Plated
Note:
1
/2" 2"R CS2 Used with S2 internal trim only.
For H
2
2"F 4"R CS2 Used with S1 internal trim only.
For H
2
Part CS CS2*
Temp F
3 2
3
/4 1
1
/2
-20 to 100 2250 2250 1500
200 2000 1350 1300
250 1775 1150 1150
300 1500 975 950
350 1225 800 800
Seat Seal Codes 02
Pressure/Temperature Limits
Temp F
3 2
3
/4 1
1
/2
-20 to 100 2500 2500 1500
180 1550 1550 1375
Seat Seal Codes 03
Temp F
2
3
/4 1
1
/2
-20 to 100 3000 3000
180 1550 1550
Seat Seal Codes 33
Differential Pressure (psi)
Bore
Size (in)
275 500 740 1000
3
/4 90 90 102 112 151
1 146 199 218 252 284
1
1
/2 364 406 476 567 686
2 637 719 868 1050 1236
3 840 1260 1680 2030 2390
Seat Seal Codes 02
1500
Weights
Valve Size (in)/Type
Class/Weight
4 2 1
ANSI 150 B200 B200 B200 B200 B200
Weight (lbs) 6.5 9.0 12.5 52.0 81.0
Weight (kg) 3.0 4.0 5.7 23.6 36.8
ANSI 300 B220 B220 B220 B220
Weight (lbs) 10.0 25.0 76.0 110.0
Weight (kg) 4.5 11.4 34.5 50.0
ANSI 600 (RF) B214 B214 B214 B214 B214
ANSI 600 (RJ) B270 B270 B270 B270 B270
Weight (lbs) 14.0 27.0 33.0 81.0 115
Weight (kg) 6.4 12.3 15.0 36.8 52.3
TE B236
Weight (lbs) 12.0
Weight (kg) 5.5
Regular Port
Stem Torques (in- lbs)
1
1
/2 3
Valve Size (in)
Class/Weight
1 1
1
/2 2 3
ANSI 150 B210 B210 B210 B210
Weight (lbs) 8.5 17.0 33.0 64.0
Weight (kg) 3.9 7.7 15.0 29.0
ANSI 300 B228 B228 B228 B228
Weight (lbs) 12.0 24.0 38.0 82.0
Weight (kg) 5.5 10.9 17.3 37.3
ANSI 600 (RF) B282 B282 B282 B282
ANSI 600 (RJ) B272 B272 B272 B272
Weight (lbs) 16.0 32.0 47.0 87.0
Weight (kg) 7.3 14.5 21.4 39.5
TE B238
Weight (lbs) 23.0
Weight (kg) 10.4
Full Bore
Differential Pressure (psi)
Bore
Size (in)
275 500 740 1000
3
/4 108 108 125 140 190 305 420 500
1 264 264 290 320 380 500 620 744
1
1
/2 480 528 610 726 895 1202 1510 1812
2 900 980 1110 1300 1520 2040 2560 3070
3 2700 2940 3330 3900 4560
Seat Seal Codes 03/33
1500 2000 3000 2500
Body ASTM A105 ASTM A105
Tailpiece AISI 1018 AISI 1018
Lock Plate
Carbon Steel Carbon Steel
Zinc Plated Zinc Plated
Lock Plate Screws Carbon Steel Carbon Steel
Grease Fitting Carbon Steel Carbon Steel
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
(p141)
B200Regular 150 Raised Face Flanges
B210Full 150 Raised Face Flanges
B238Full Threaded End
B270Regular 600 Ring Joint
B272Full 600 Ring Joint
B236Reduced Port Threaded End
Full Bore
F
B
G
D
A
E
W
T
S
J
J
H
Q
R
S
T
J
J
H
F
G
C
D
A
E
B
W
Regular Port
Top View Top View
Front View Front View
Stem Dimensions Stem Dimensions
Dimension A
Size
B200 B210 B220 B228
1.0 R 5.00 6.5 8.50 8.50 .75 1.0 1.0 1.9 3.6 5.8
7
/16-20 .44 .25 .50 1.00 .75 10-24
1.0 F 5.00 6.50 8.50 8.50 1.0 1.25 2.8 3.9 7.0
5
/8-18 .62 .36 .81 1.25 1.14
1
/4 -20
1.5 R 6.50 9.50 9.50 1.0 1.5 1.25 2.8 3.9 7.0
5
/8-18 .62 .36 .81 1.25 1.14
1
/4 -20
1.5 F 6.50 7.50 9.50 9.50 1.5 1.75 3.6 5.0 9.5
3
/4-16 .75 .44 .81 1.50 1.34
5
/16-18
2.0 R 7.00 8.50 11.50 11.62 5.50 1.5 2.0 1.75 3.6 5.0 9.5
3
/4-16 .75 .44 .81 1.50 1.34
5
/16-18
2.0 F 7.00 8.50 11.50 11.62 6.25 2.0 2.5 4.7 5.2 15.0 1.12 .693 1.25 2.62 1.66
3
/8-16
3.0 R 8.00 11.12 14.00 14.12 2.0 3.0 2.5 4.7 5.2 15.0 1.12 .693 1.25 2.62 1.66
3
/8-16
3.0 F 8.00 11.12 14.00 14.12 3.0 3.5 5.6 6.1 15.0 1.12 .693 1.09 3.00 1.50
1
/2-13
4.0 R 9.00 12.00 17.00 17.12 3.0 4.0 3.5 5.6 6.1 15.0 1.12 .693 1.09 3.00 1.50
1
/2-13
B214 B282 B272 B270 B236 B238
Approximate dimension in inches
150RF 300RF 600RF 600RJ TE
B H** C D E S T J W F G R Q**
Dimension A
Size
B200 B210 B220 B228
25 R 127 165 216 216 19 25 25 49 92 146
7
/16-20 11 6 13 25 19 10-24
25 F 127 165 216 216 25 32 71 100 178
5
/8-18 15 9 21 32 29
1
/4-20
38 R 165 241 241 25 38 32 71 100 178
5
/8-18 16 9 21 32 29
1
/4-20
38 F 165 191 241 241 38 43 90 127 191
3
/4-16 19 11 21 38 34
5
/16-18
51 R 178 216 292 295 140 38 51 44 90 127 191
3
/4-16 19 11 21 38 34
5
/16-18
51 F 178 216 292 295 159 51 64 119 132 381 28 18 32 67 42
3
/8-16
76 R 203 282 356 259 51 76 64 119 132 381 28 18 28 67 42
3
/8-16
76 F 203 282 356 359 76 89 143 155 381 28 18 28 76 38
1
/2-13
102 R 229 305 432 435 76 102 89 143 155 381 28 18 28 76 38
1
/2-13
B214 B282 B272 B270 B236 B238
Approximate dimension in millimeters
150RF 300RF 600RF 600RJ TE
B H** C D E S T J W F G R Q**
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
C H O K E S A N D C O U P L I N G S
How to Order Chokes
1. Type of choke Positive or Adjustable.
2. Specify Working Pressure.
3. Type of Inlet and Outlet Connections;
Size and Pressure Rating.
4. Specify Trim Size (Orifice Required).
5. Trim Material Alloy Steel, Stainless Steel,
Tungsten Carbide.
6. Specify Heater Choke or Standard Choke.
7. Use part number schemes as applicable (see index at right).
NOTE: Beans for Positive Chokes are not furnished and must
be ordered separately (see pages 157-159)
Additional Choke Specifications
1. If for API-6A, specify:
a) Product Specification Level (PSL): 1, 2, or 3
b) Temperature Class
c) Retained Fluid Rating
2. Specify the Flow Conditions:
a) Flow Rate for gas and liquid
b) Inlet Pressure
c) Outlet Pressure
d) Gas and Liquid specific gravity
e) Liquid Viscosity
f) Upstream Temperature
g) % of H
2
S and CO
2
(if any)
h) Type of corrosion inhibitor (if any)
i) Presence of sand (if any)
3. Specify topworks for Adjustable Chokes
(Handwheel or Pneumatic Actuation).
4. Note any special requirements: company, industry,
or government.
How to Order Couplings
1. Specify Size and Pressure Ratings.
2. Specify Bore Size, if Butt Weld End Connections.
3. Specify Threaded End Connections, if desired.
4. Specify Operating Temperature.
5. Specify Seal Ring Material: Bronze or Stainless Steel.
6. Note any special requirements: company, industry,
or government.
7. Use part number schemes as applicable (see index at right).
NOTE: NACE (MR-01-75) available; please specify if required.
Chokes & Couplings
Choke Accessories
Dimensional Data
Thornhill Craver Force Balanced Chokes
UNIBOLT Couplings
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Adjustable Choke Positive Choke
Service Classifications (Trim Definition):
T1: General Service, CO
2
Partial Pressure (<7 PSIA)
T2: General and Sour Service, Low CO
2
(7 to 30 PSIA),
Erosive Service
T3: General and Sour Service, High CO
2
(>30 PSIA),
Erosive Service
Trim T1
BodyLow Alloy SteelAPI 75K
StemLow Alloy SteelCarburized and Hardened
SeatLow Alloy SteelCarburized and Hardened
Yoke Hub/ Blanking PlugLow Alloy Steel
API 60K or 75K
Trim T2
BodyLow Alloy SteelAPI 75K
StemMartensitic Stainless Steel and Tungsten Carbide
SeatMartensitic Stainless Steel and Tungsten Carbide
Yoke Hub/ Blanking PlugLow Alloy Steel
API 60K or 75K
Trim T3
BodyMartensitic Stainless SteelAPI 75K
StemMartensitic Stainless Steel and Tungsten Carbide
SeatMartensitic Stainless Steel and Tungsten Carbide
Yoke Hub/ Blanking PlugMartensitic Stainless Steel
API 75K
Body Materials Available:
1. Trim T1 &T2(Cast) ASTMA487 Grade 4 Modified to
Conform with API 6A, 95,000 PSI Minimum Tensile
Strength, 75,000 PSI Minimum Yield Strength.
2. Trim T3(Cast) ASTMA217-CA15 Modified to Meet
API 6A, Quenched and Tempered to 95,000 PSI Minimum
Tensile Strength, 75,000 PSI Minimum Yield Strength.
3. Non-StandardAvailable On Special Order:
(A)ASTMA487-CA6NM, Martensitic Stainless Steel, for
Low Temperature, Corrosive and Sour Service.
(B)ASTMA744-CD4MCU, Duplex Stainless Steel for
Severe Corrosive Applications.
Yoke Hub
Yoke Nut
Member
Body
Nut Member
Plain Hub
Seal Ring
Metallic Seat Gasket
Stem Seat
Pkg. Ret. Ring
Stem Bearing
Stem Packing
Pkg. Box Insert
Yoke Seal Ring
(Ring-Groove Type)
Stem
Indicator
Hex Nut
Washer
Handwheel
Stem Lock
Plain Hub
Coupling Nut
Member
Nut Member
Coupling
Seal Ring
Bean Gasket
Flow Bean
Body
Blanking Plug
Seal Ring
T-Head Bolt/Nut
Blanking Plug
Pipe Plug-
1
/2" NPT
Material Usage Guide for Ordering Adjustable and Positive Chokes
P A R T S D E T A I L
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
C H O K E A C C E S S O R I E S T HORNHI L L CRAVE R
Model
Part Name
Order
Number Number
Fig. 110-C Gauge Connector (Upper Element) 90205
Fig. 110-V
Gauge Valve (Lower Element)
90206
Spring-Loaded 0lb-10,000lb CWP
Gauge Valve (Lower Element)
Fig. 112-V Non-Spring Loaded for 90224
Pressures Consistently above 500lb
Repair Kit for Lower Element

91721
(Fig. 110-V)
Gauge Valve and Connector
12 Chrome Stainless Steel; 0 to 10,000 lb CWP
Model
Part Name
Order
Number Number
TC-560
Bleeder Plug
90017
(Stainless Steel)
TC-2213
Bleeder Plug
90294
(Stainless Steel)
TC-2273
Bleeder Plug
90509
(Stainless Steel)
TC-1674
Replaceable Monel Gasket
90018
(For TC-560)
TC-576
Replaceable Monel Gasket
90508-002
(For TC-2273)
Bleeder PlugsFor all 3000 lb, 5000 lb,
10,000 lb and 15,000 lb CWP UNIBOLT Fittings
Gauge Valve and Connector
0 to 10,000 lb WP (spring-loaded type).
Furnished with
1
/2" NPT male thread
connection of Gauge Valve;
1
/2" female
thread in Connector.
Upper and lower elements disengaged.
SD-10902
TC-560-12-CR
Stainless Steel
Bleeder Plug
TC-2273-12-CR
Stainless Steel
Bleeder Plug
TC-2213-12-CR
Stainless Steel
Bleeder Plug
SD-10894
SD-10894
SD-10894
Model
Part Name Material
Order
Number Number
TC-1284 Cage Nipple 1" (Threaded for TC-575 X Bean Insert) 90554-001
TC-1082 Cage Nipple 1
1
/4" (Threaded for TC-575 X Bean Insert) 90544-001
1
/2" (Threaded for TC-575 X Bean Insert) 92331
TC-1018 Cage Nipple 2" (for TC-1017-MCage Nipple Beans) 90540-001
1
/2" (for TC-1017-MCage Nipple Beans) 90541-001
Special Cage Nipple and Bean Inline Positive Chokes.
(Available in Stainless Steel for corrosive service.)
TC-1284-1" Cage Nipple with
TC-575 "X" Bean Insert
SD-10894 SD-10894
Insert TC-575
(See Page 150)
TC-1017-M
Flow Bean
(See Page 150)
TC-1018
Cage Nipple
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
T HORNHI L L CRAVE R D I M E N S I O N A L D A T A
Size
Maximum (Outlet) (Inlet)
C (Adj.)* C (Pos.)*
Adjustable Positive
CWP A* B* Choke Wt. (lbs) Choke Wt. (lbs)
Dimension
Outlet Inlet
UNIBOLT BW UNIBOLT BW 2" 3000 8
7
/8 10 24
3
/16 15
3
/16 93 71
UNIBOLT LP UNIBOLT LP 2" 3000 8
5
/8 9
3
/4 23
15
/16 14
15
/16 93 71
Flanged Flanged 2" API 3000 9
3
/8 7
1
/2 24
11
/16 15
11
/16 123 101
1
/2 8 25
13
/16 16
13
/16 158 145
UNIBOLT BW UNIBOLT BW 2" 5000 8
7
/8 10 24
3
/16 15
3
/16 93 71
UNIBOLT LP UNIBOLT LP 2" 5000 8
5
/8 9
3
/4 23
15
/16 14
15
/16 93 71
3
/8 7
1
/2 24
11
/16 15
11
/16 123 101
1
/8 8
5
/8 26
7
/16 17
7
/16 195 173
UNIBOLT BW UNIBOLT BW 2" 10,000 10
1
/2 10
5
/8 26
1
/4 17
1
/4 144 110
Flanged Flanged 1
3
/16" 10,000 11
1
/8 9 26
7
/8 18
3
/4 134 115
Flanged Flanged 2
1
/16" 10,000 11
1
/8 9 26
7
/8 17
7
/8 133 114
UNIBOLT Adjustable/Positive Chokes
UNIBOLT Chokes with Ring-Groove Type Seal (inches)
Note: Other dimensional information available upon request.
Other end connections available upon request.
*A = Inlet Centerline To Face Outlet.
*B = Outlet Centerline To Face Inlet.
*C = Overall Dimension.
Size
C (Adj.)* C (Pos.)*
Adjustable Positive
Dimension
Outlet Inlet
Threaded Threaded 2" 2000 6
1
/4 3
1
/4 18
3
/16 11
23
/32 38 27
3
/8 5
3
/8 20
5
/16 13
27
/32 57 48
Flanged Flanged 2" ANSI 1480 8
3
/8 5
3
/8 20
5
/16 13
27
/32 57 48
UNIBOLT BW Flanged
2" 10,000 11
3
/8 9 28
1
/16 17
7
/8 125 100
(XXH) 2
1
/16"
Flanged Flanged 1
13
/16" API 10,000 9
1
/4 7 24
15
/16 15 115 90
Flanged Flanged 2
1
/16" API 10,000 11
1
/8 9 27
13
/16 17
3
/8 123 97
Flanged Flanged 1
13
/16" API 15,000 8
1
/4 8
1
/4 24
15
/16 16
1
/2 167 137
Flanged Flanged 2
1
/16" API 15,000 8
1
/4 8
1
/4 24
15
/16 16
1
/2 175 145
Flanged Flanged 1
13
/16" API 20,000 9
11
/16 9
11
/16 26
5
/8 19
1
/16 232 211
Flanged Flanged 2
1
/16" API 20,000 9
11
/16 9
11
/16 26
5
/8 19
1
/16 272 251
UNIBOLT Chokes with Taper-Type Seal (inches)
Design Size
C (Adj.)* C (Pos.)*
Adjustable Positive
Dimension
Outlet Inlet
Flanged Flanged 3" API 3000 9 8
5
/8 26
7
/8 16
31
/32 182 148
1
/4 9
1
/4 27
1
/8 17
7
/32 195 161
1
/4 9
1
/4 195
Flanged Flanged
3" API 10,000 11
3
/4 10
3
/8 32
19
/32 20
15
/16 270
3
1
/16" 3
1
/16"
Flanged Flanged
3" API 10,000 13
1
/4 11
1
/4 34
3
/32 22
7
/16
4
1
/16" 4
1
/16"
Flanged Flanged
3" API 10,000 10
7
/8 8
7
/8 31
23
/32 20
1
/16 240
2
9
/16" 2
9
/16"
2" Maximum Opening Chokes with Taper-Type Seal (inches)
Conventional
Stem/Seat
Design
Force
Balanced
Stem
Design
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
D I M E N S I O N A L D A T A T HORNHI L L CRAVE R
Heater Chokes
Nominal Barrel
A B C D H J K
Weight,
Size O.D.,F. Lbs.
2" 5 15
1
/2 19
1
/8 4
7
/8 3
13
/32 2
7
/8 1.375 12
5
/8 170
10,000 Lbs. CWP, UNIBOLT Inlet/
UNIBOLT Outlet (Butt Weld) (inches)
Inlet Connection
A B C D F G H J K
Weight,
Size Type Lbs.
2
1
/2" UNIBOLT Butt Weld 16
11
/16 16
5
/16 4
7
/8 3
1
/2 5 2
7
/8 1
3
/8 11
9
/16 189
1
13
/16"15,000 lbs CWP API Flg 16
11
/16 4
7
/8 5 8
1
/4 175
2
1
/16"20,000 lbs CWP API Flg 17
15
/16 16 5
1
/2 5 9
11
/16 2
7
/8 1,100 235
Adjustable Heater Chokes 15,000 lb CWP;
Taper-Type Seal (inches)
Nominal
A B C D F H J K
Size
Wt. w/
UNIBOLT,
Lbs.
2" 16
5
/8 15
9
/16 3
5
/8 3
1
/8 5 2
3
/8 1.503 9
1
/2 116
Adjustable Heater Chokes 6,500 lb CWP;
Taper-Type Seal (inches)
Nominal Barrel
A B C E
Weight,
Size O.D.,F. Lbs.
2" 4 14
15
/16 12
1
/4 3
11
/16 4
1
/8 87
6,500 lb CWP, Threaded Inlet/Threaded Outlet (inches)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
A D J U S T A B L E C H O K E S
2" 2000 lb CWP UNIBOLT
Threaded Inlet x Threaded Outlet, or
Flanged Inlet x Flanged Outlet
90156- X X X 0 XX 0
Threaded by Threaded Flanged by Flanged
Inlet
Outlet Outlet
Inlet
2" 3000/5000 lb CWP UNIBOLT (Ring-Groove Type Seal)
Threaded Inlet x UNIBOLT Outlet, or
Flanged Inlet x UNIBOLT Outlet
XXXXX- X X X X X X 0
Body & Yoke Hub Material
Alloy Steel Body &
Yoke Hub 1
Stainless Steel Body &
Yoke Hub 2
Alloy Steel Body/
Stainless Steel Yoke Hub 3
Outlet Conn Plain Hub
2" NPT Threaded 1
2" SCH XXH BW 2
2" SCH 160 BW 3
2" SCH 80 BW 4
Stem & Seat Material
Steel 1
Stainless Steel
1
2
Tungsten Carbide 3
Seat Bore
.50" Bore 1
.75" Bore 2
1.00" Bore 3
Service
Standard 0
NACE
2
1
Threaded by UNIBOLT Flanged by UNIBOLT
Inlet
Outlet Outlet
Inlet
Notes: 1 - SS Yoke Hub recommended with SS Stem
(Body & Yoke Hub option 3).
2 - Tungsten Carbide Stem and Seat required for NACE Service.
Assembly Part Number (see example
*
)
UNIBOLT Inlet x UNIBOLT Outlet
Alloy Steel Body &
Yoke Hub 1
Yoke Hub 2
Alloy Steel Body/
UNIBOLT by UNIBOLT
Outlet
Inlet
Assembly Part Number
92931- X X X X X X 0
Alloy Steel Body &
Yoke Hub 1
Yoke Hub 2
Alloy Steel Body/
API Flanges RF Flanges RTJ Flanges Code
2-1/16" 3000 2" 300 RF 2" 600 RTJ 11
2-1/16" 5000 2" 600 RF 2" 900 RTJ 22
2-9/16" 3000 2" 900 RF 2" 1500 RTJ 33
2-9/16" 5000 2" 1500 RF 2" 2500 RTJ 44
2-1/16" 2000 3" 300 RF 3" 600 RTJ 55
3-1/8" 5000 4" 600 RF 3" 900 RTJ 66
3-1/8" 3000 3" 600 RF 3" 1500 RTJ 77
2" 150 RF 3" 2500 RTJ 88
4" 1500 RTJ 99
Seat Bore
.50" Bore 1
.75" Bore 2
1.00" Bore 3
Service
Standard 0
NACE
2
1
Flanged by Flanged
Outlet
Inlet
Steel 1
Stainless Steel
1
2
Tungsten Carbide 3
Seat Bore
.50" Bore 1
.75" Bore 2
1.00" Bore 3
Service
Standard 0
NACE
2
1
Inlet Conn Plain Hub
2" SCH XXH BW 1
2" SCH 160 BW 2
2" NPT Threaded 4
2" SCH XXH BW 1
2" SCH 160 BW 2
2" SCH 80 BW 3
2" NPT Threaded 4
Steel 1
Stainless Steel
1
2
Tungsten Carbide 3
XXXXX- X X X X XX 0
Inlet/Outlet
Steel 1
Stainless Steel
1
2
Inlet/Outlet
2" NPT Threaded 11
2" ANSI 600 RF 22
2" ANSI 600 RTJ 33
2-1/16" API 2000 44
Alloy Steel Body
1
& Yoke Hub
Stainless Steel Body
2
& Yoke Hub
Alloy Steel Body/
3
Stainless Steel Yoke Hub
Seat Bore
.50" Bore 1
.75" Bore 2
*
P/N example: 2" 2000 lb UNIBOLT Tee Type Adjustable choke, Alloy
Steel Body and Hub, SS Stem and Seat, .75 seat bore,
2" ANSI 600 Flanged RF inlet and outlet 90156-1220220
Inlet Conn Body
2" NPT Threaded 0
2-1/16" 3000 1
2-1/16" 5000 2
2-1/16" 2000 3
2" ANSI 600 RF 4
2" ANSI 900 RF 5
2" ANSI 1500 RF 6
Base Number
Flanged Inlet 90034-
Threaded Inlet 90052-
Base Number
API Flanges 93286-
RF Flanges 92929-
RTJ Flanges 92930-
How to Order
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Service
Standard 0
NACE
2
1
2" 10,000 UNIBOLT (Ring-Groove or Taper-Type Seal)
API Flanged Inlet x Flanged Outlet
XXXXX- X X X X XX 0
Alloy Steel Body &
Yoke Hub 1
Yoke Hub 2
Alloy Steel Body/
Inlet/Outlet
1-13/16" 10,000 11
2-1/16" 10,000 22
2-9/16" 10,000 33
3-1/16" 10,000* 44
Flanged by Flanged
Outlet
Inlet
2" 10,000 UNIBOLT (Ring Groove or Taper Type Seal)
API Flanged Inlet x UNIBOLT Outlet
Alloy Steel Body &
Yoke Hub 1
Yoke Hub 2
Alloy Steel Body/
Inlet Conn Body
1-13/16" 10,000 1
2-1/16" 10,000* 2
2" SCH XXH BW 1
2" SCH 160 BW 2
2" SCH 80 BW 3
2-1/2" SCH XXH BW 4
2-1/2" 1.10" ID BW 5
2-1/2" 1.38" ID BW 6
2-1/2" SCH 160 BW 7
Steel 1
Stainless Steel
1
2
Tungsten Carbide 3
Seat Bore
.50" Bore 1
.75" Bore 2
1.00" Bore 3
Service
Standard 0
NACE
2
1
Flanged by UNIBOLT
Outlet
Inlet
Notes: 1 - SS Yoke Hub recommended with SS Stem
(Body & Yoke Hub option 3).
Assembly Part Number (see page 138 for P/N example)
2" 10,000 UNIBOLT (Ring-Groove Type Seal)
Alloy Steel Body &
Yoke Hub 1
Yoke Hub 2
Alloy Steel Body/
UNIBOLT by UNIBOLT
Outlet
Inlet
2" 15,000/20,000 UNIBOLT (Taper-Type Seal)
90268- X X X X X X 0
Body Material
Alloy Steel (15,000 PSI Only) 1
Stainless Steel 2
API 15,000 PSI API 20,000 PSI Code
1-13/16" 15,000 1-13/16" 20,000 11
2-1/16" 15,000 2-1/16" 20,000 22
2-9/16" 15,000 33
Seat Bore
.50" Bore 1
.75" Bore 2
Service
Standard 0
NACE
2
1
Flanged by Flanged
Outlet
Inlet
Steel 1
Stainless Steel
1
2
Tungsten Carbide 3
Seat Bore
.50" Bore 1
.75" Bore 2
1.00" Bore 3
Service
Standard 0
NACE
2
1
Stainless Steel 2
Tungsten Carbide 3
XXXXX- X X X X XX 0
*Ring Groove Type Seal Only
*Ring-Groove Type Seal Only
2" SCH XXH BW 1
2" SCH 160 BW 2
2" SCH 80 BW 3
2-1/2" SCH XXH BW 4
2-1/2" 1.10" ID BW 5
2-1/2" 1.38" ID BW 6
2-1/2" SCH 160 BW 7
2" SCH XXH BW 1
2" SCH 160 BW 2
2-1/2" SCH XXH BW 4
2-1/2" 1.10" ID BW 5
2-1/2" 1.38" ID BW 6
2-1/2" SCH 160 BW 7
Inlet/Outlet
Seat Bore
.50" Bore 1
.75" Bore 2
1.00" Bore 3
Steel 1
Stainless Steel
1
2
Tungsten Carbide 3
Base Number
Ring Groove Type Seal 90251-
Taper Type Seal 90303-
Base Number
Ring Groove Type Seal 90265-
Taper Type Seal 90309-
Base Number
15,000 PSI WP 90271-
20,000 PSI WP 90387-
How to Order
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
XXXXX- X X X X XX 0
Alloy Steel Body &
Yoke Hub 1
Yoke Hub 2
Alloy Steel Body/
Seat Bore
1.00"Bore
2
1
1.50"Bore 2
1.75"Bore 3
2.00"Bore 4
Service
Standard 0
NACE
3
1
Steel 1
Stainless Steel
1
2
Tungsten Carbide 3
Inlet/Outlet
Outlet
Inlet
Flanged by Flanged
3" 3000/5000 UNIBOLT (Taper-Type Seal)
UNIBOLT End Connection, 2" Max Open, 1996 Design
Alloy Steel Body &
Yoke Hub 1
Yoke Hub 2
Alloy Steel Body/
Seat Bore
1.00"Bore
2
1
1.50"Bore 2
1.75"Bore 3
2.00"Bore 4
Service
Standard 0
NACE
3
1
Steel 1
Stainless Steel
1
2
Tungsten Carbide 3
Outlet
Inlet
UNIBOLT by UNIBOLT
3" Plain Hub 4" Plain Hub Code
3" SCH XXH BW 4" SCH XXH BW 1
3" SCH 160 BW 4" SCH 160 BW 2
3" SCH 80 BW 4" SCH 80 BW 3
3" NPT Threaded 4" NPT Threaded 4
3" SCH 160 BW 4" SCH 160 BW 2
3" SCH 80 BW 4" SCH 80 BW 3
3" NPT Threaded 4" NPT Threaded 4
Notes: 1 - SS Yoke Hub recommended with SS Stem (Body & Yoke Hub option 3).
2 - 1.00" Bore Seat available in Tungsten Carbide only.
Assembly Part Number (see page 138 for P/N example
Base Number
API Flanges 93281-
RF Flanges 93396-
RTJ Flanges 93397-
Base Number
3" Plain Hub 93398-
4" Plain Hub 93399-
3" 3000/5000 UNIBOLT (Taper-Type Seal)
Flanged End Connection, 2" Max Open, 1996 Design
How to Order
2-9/16" 5000 3" 300 RF 3" 600 RTJ 11
3-1/8" 5000 3" 600 RF 3" 900 RTJ 22
4-1/16" 5000 3" 900 RF 3" 1500 RTJ 33
3-1/8" 3000 3" 1500 RF 4" 600 RTJ 44
2-1/16" 5000 4" 300 RF 4" 900 RTJ 55
4" 600 RF 4" 1500 RTJ 66
4" 900 RF 77
4" 1500 RF 88
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
F O R C E B A L A N C E D C H O K E S T HORNHI L L CRAVE R
XXXXX- X X X X XX X
Alloy Steel 1
Stainless Steel 2
API 5,000 PSI API 10,000 PSI
3-1/8" API 5000 Flgd 2-9/16" API 10,000 Flgd 11
2-9/16" API 5000 Flgd 3-1/16" API 10,000 Flgd 22
4-1/16" API 10,000 Flgd 33
Base Number
5,000 PSI WP 90395-
10,000 PSI WP 90416-
Seat Bore
1.50"Bore 2
1.75"Bore 3
2.00"Bore 4
Service
Standard 0
NACE
1
1
Seal Material
Buna-N 1
Viton 2
Stainless Steel 2
Tungsten Carbide 3
Inlet/Outlet
Outlet
Inlet
Flanged by Flanged
Note: 1 - Tungsten Carbide Stem and Seat required for NACE Service.
Other flange sizes availabe
Force Balanced Design Concept
The design of the Force Balanced Choke dis-
tributes the force of downstream pressure to
the stem equally in every direction, eliminat-
ing the effects of upstream pressure entirely
and minimizing the load on stem threads.
The upper stem is designed so that it
rotates in a bearing without rotating the lower
stem, further reducing torque.
This design results in a Choke that is
easier to operate than any other conventional
type. In addition, the low torque eliminates
the need for expensive gear operators.
SEE DETAIL A
SEE DETAIL B
DETAIL B
DETAIL A
Forced Balanced Choke
Vent
Sleeve
Seals
Vent
Sleeve
Lower stem
Upper stem
3" 5,000/10,000 UNIBOLT (Taper-Type Seal)
API Flanged Inlet x Flanged Outlet, Handwheel Operated
How to Order
Stem
Coupling
Stem Seals
Stem Seals
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
L O N G N O S E H E A T E R C H O K E S
90358- X X X X X X 0
Inlet Conn
2" SCH XXH 1
2" SCH 160 2
2" SCH 80 3
2-1/2"1.38"ID 4
2-1/2" SCH XXH 5
Outlet Conn
2" SCH XXH 1
2" SCH 160 2
2" SCH 80 3
2-1/2"1.38"ID 4
2-1/2" SCH XXH 5
Seat Bore
.50" ID 1
.75" ID 2
1.00" ID 3
Service
Standard 0
NACE 1
UNIBOLT by UNIBOLT
Inlet
Outlet
Alloy Steel Body &
Yoke Hub 1
Yoke Hub 2
Alloy Steel Body/
Alloy Steel Body &
Yoke Hub 1
Yoke Hub 2
Alloy Steel Body/
Steel 1
Stainless Steel 2
Tungsten Carbide 3
Seat Bore
.50" ID 1
.75" ID 2
1.00" ID 3
Steel 1
Stainless Steel 2
Tungsten Carbide 3
2" 10,000 lb UNIBOLT (Ring-Groove Type Seal)
90113- X X X X X X 0
Outlet Conn
Lug Hub
(No Plain Hub) 0
2" SCH XXH 1
2" SCH 160 2
2" SCH 80 3
2-1/2" SCH XXH 4
2-1/2"1.1"ID 5
2-1/2"1.38"ID
(XXXH) 6
2-1/2"SCH 160 7
Seat Bore
.50" ID 1
.75" ID 2
1.00" ID 3
Service
Standard 0
NACE
1
1
UNIBOLT by UNIBOLT
Inlet
Outlet
Alloy Steel Body &
Yoke Hub 1
Yoke Hub 2
Alloy Steel Body/
Steel 1
Stainless Steel 2
Tungsten Carbide 3
2" 6500 lb UNIBOLT (Taper-Type Seal)
Threaded Inlet x Threaded Outlet
90183- X X X X XX 0
Inlet/Outlet
2" NPT 11
Service
Standard 0
NACE
1
1
Threaded by Threaded
Outlet
Inlet
UNIBOLT Long Nose Heater Chokes incorporate the
proven principles of the UNIBOLT Adjustable and Positive
Chokes.
The main distinguishing feature of the Long Nose
design is the additional length of the Choke Body. When
installed on an indirect heater, with the outlet end of the
Choke fastened directly to the tube bundle, the Choke Seat
area is completely surrounded by the hot water which is pri-
marily used to heat the tubes. The heat generated in this man-
ner has a benificial effect in minimizing the severe refrigerat-
ing action resulting from metering high pressure natural gas
through a small orifice. The UNIBOLT Long Nose Heater
Choke is the accepted leading performer in this application.
UNIBOLT Long Nose heater chokes are available in
6,500, 10,000, 15,000 and 20,000 psi WP. A 6,500 psi econo-
my design is also offered (see following page for details).
Inlet Conn
Lug Hub
(No Plain Hub) 0
2" SCH XXH 1
2" SCH 160 2
2-1/2" SCH XXH 4
2-1/2"1.1" ID 5
2-1/2"1.38" ID
(XXXH) 6
2-1/2"SCH 160 7
2" 6500 lb UNIBOLT (Taper-Type Seal)
How to Order
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Flanged by UNIBOLT
Inlet
Outlet
L O N G N O S E H E A T E R C H O K E S T HORNHI L L CRAVE R
90337- X X X X X X 0
Inlet Conn
1-13/16" 15,000 lb 1
Outlet Conn
1.1" Dia ID 1
1.38" Dia ID 2
2" SCH 80 3
2-1/2" SCH 80 4
Seat Bore
.50" ID 1
.75" ID 2
Service
Standard 0
NACE
1
1
Flanged by UNIBOLT
Inlet
Outlet
Alloy Steel Body &
Yoke Hub 1
Yoke Hub 2
Alloy Steel Body/
Stainless Steel 2
Tungsten Carbide 3
2" 20,000 lb UNIBOLT (Taper Type Seal)
90668- X X X X X X 0
Inlet Conn
1-13/16" 20,000 lb 1
Outlet Conn
1.1" Dia ID 1
Seat Bore
.50" ID 1
.75" ID 2
Service
Standard 0
NACE
1
1
Yoke Hub 2
Stainless Steel 2
Tungsten Carbide 3
Alloy Steel Body &
Yoke Hub 1
Alloy Steel Body/
Seat Bore
.50" ID 1
.75" ID 2
1.00" ID 3
Steel 1
Stainless Steel 2
Tungsten Carbide 3
2" 6500 lb UNIBOLT Adjustable Economy Heater Chokes
90071- X X X X XX 0
Inlet/Outlet
2" NPT 11
Socket Weld 22
Service
Standard 0
NACE
1
1
or
Socket Weld by Socket Weld
Outlet
Inlet
The Thornhill Craver Economy Heater
Choke Provides Proven Dependability at
Lower Cost.
Whether you are a fabricator of indirect-fired heaters or an
end user, the Thornhill Craver 6500 psi Economy Heater
Choke will take a big slice out of your operating costs.
Several thousand trouble-free installations provide proof of
long-term dependability.
For stem and seat trim, you may specify alloy steel,
stainless steel or tungsten carbide. These parts are easily
replaced and are completely interchangeable with UNIBOLT
chokes. This means that you won't be faced with extra inven-
tory if you use both types.
The bonnet has a recess to permit easy removal with a
spanner wrench, avoiding pipe wrench gouging and other
damage.
An indicator, calibrated in 64ths of an inch, allows accu-
rate pressure control. Once adjusted to the desired pressure, a
positive stem lock holds the stem firmly in position, prevent-
ing movement caused by accident or vibration.
The choke is also equipped with a safety pressure-relief
vent which warns the operator if there is pressure in the line
when attempting to remove the bonnet.
The Thornhill Craver Economy Heater Choke is more
cost effective than other chokes but it offers premium perfor-
mance. Specify Thornhill Craver products from Cooper
Cameron Valves.
2" 15,000 lb UNIBOLT (Taper Type Seal)
How to Order
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
T HORNHI L L CRAVE R U N I B O L T S T E A M C H O K E S
2" 3000 lb UNIBOLT Steam Chokes
(Ring-Groove Type Seal)
NPT Inlet x UNIBOLT Outlet
Seat Sizes Available: 1/2", 3/4" and 1"
93179- X X X X 0 X 0
Alloy Steel Body &
Yoke Hub 1
Yoke Hub 2
Alloy Steel Body/
Outlet
2" NPT 1
2" SCH XXH BW 2
2" SCH 160 BW 3
2" SCH 80 BW 4
Stainless Steel 1
Seat Bore
.50" ID 1
.75" ID 2
1.00" ID 3
Service
Standard 0
NACE 1
Threaded by UNIBOLT
Inlet
Outlet
(Ring Groove Type Seal)
Seat Sizes Available: 1/2", 3/4" and 1"
93119- X X X X X X 0
Alloy Steel Body &
Yoke Hub 1
Alloy Steel Body/
Inlet
SCH XXH BW 1
SCH 160 BW 2
SCH 80 BW 3
2" NPT 4
Outlet
SCH XXH BW 1
SCH 160 BW 2
SCH 80 BW 3
2" NPT 4
Stainless Steel 1
Seat Bore
.50" ID 1
.75" ID 2
1.00" ID 3
Service
Standard 0
NACE
1
1
UNIBOLT by UNIBOLT
Inlet
Outlet
Unibolt Adjustable Steam Chokes
UNIBOLT Steam Chokes, furnished in 2" size, are designed for
use in steam injection or other high temperature systems up to
800F. Charts on page 145 show temperature-pressure ratings.
Steam Chokes are available in 3000 lbs. CWP, with 2000 lbs.
CWP also available. End connections available: Threaded Inlet/
Outlet, UNIBOLT Inlet/Outlet, Threaded Inlet/UNIBOLT Outlet
The Packing Stays Put
Outside temperature: 50F
Steam temperature: 800F
It is reassuring to know a Thornhill Craver steam choke is
on the job. Because when recovering viscous crudes, youre
completely aware of the monumental maintenance headaches a
different choke can produce. Most use rotating stems, which
can grab the packing and pull it out of place. Its downhill from
there. Steam escapes, condenses and freezes, creating a granite-
like buildup of ice on the choke, overnight. Even if tempera-
tures are ambient, the nature of your problem doesnt change; a
corrosive buildup can be as hard as the ice.
Fortunately, Thornhill Craver chokes dont use rotating
stems. Stem movement is linear one direction. It doesnt
grab the packing so no leaks occur. Just reliable service.
If packing adjustment is ever needed, the choke packing
gland is easily accessible.
And if conversion from adjustable to positive action is
required, again its good Thornhill Craver is on the job.
Our famous UNIBOLT coupling needs but one man and one
(Taper-Type Seal)
Seat Sizes Available: 1/2" and 3/4"
92918- X X X X XX 0
Alloy Steel Body &
Yoke Hub 1
Alloy Steel Body/
Inlet/Outlet
2" NPT 11
2" 600 RF 22
2" 600 RTJ 33
2-1/16" 2000 44
Stainless Steel 1
Seat Bore
.50" ID 1
.75" ID 2
Service
Standard 0
NACE
1
1
Outlet
Inlet
How to Order
wrench to release one bolt, for easy access. Time required:
about five minutes (even at 50F).
Dont worry about the seals, UNIBOLT seals much better
than conventional flanges. In fact, the seals are so good, only
light derating is necessary for up to 800F steam temperature.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
U N I B O L T S T E A M C H O K E S T HORNHI L L CRAVE R
Maximum Working
Pressure (psi)
Recommended
Temperature (F)
200 2850
300 2775
400 2775
500 2775
600 2700
650 2650
700 2500
800 2500
Temperature/Pressure De-Rating Table
3000 lb CWP 2700 SWP
Maximum Working
Pressure (psi)
Recommended
Temperature (F)
200 1900
300 1850
400 1850
500 1850
600 1800
700 1750
800 1650
Temperature/Pressure De-Rating Table
2000 lb CWP
Metal-to-metal seats
Adjustable packing gland
(1/64 calibration)
Non-rotating stem
Low friction, high temperature
graphite-based packing
Standard UNIBOLT coupling
with PLUGLOK bleeder plug
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
2" 2000lb UNIBOLT Positive Choke with Taper-Type Seal
Threaded x Threaded
Flanged x Flanged
J090179- X 000 XX X
Inlet/Outlet
2" NPT Threaded 11
2" ANSI 600 RF 22
2" ANSI 600 RTJ 33
2-1/16" API 2000 44
Body/Blanking Plug Material
Alloy Steel 1
Blkg Plug Configuration
Blind 1
1/2" NPT Tapped 2
2" 3000/5000lb UNIBOLT Positive Choke
(Ring-Groove Seal)
Flanged or Threaded Inlet x UNIBOLT Outlet
XXXXX- X 00 X X X X
Body/Blanking Plug Material*
Alloy Steel 1
Stainless Steel 2
Inlet Conn Body
2" NPT Threaded 0
2-1/16" 3000 1
2-1/16" 5000 2
2-1/16" 2000 3
2" ANSI 600 RF 4
2" ANSI 900 RF 5
2" ANSI 1500 RF 6
2" NPT Threaded 1
2" SCH XXH BW 2
2" SCH 160 BW 3
2" SCH 80 BW 4
Base Number
Flanged Inlet 90051
Threaded Inlet 90057
Service
Standard 0
NACE 1
Assembly Part Number (see page 138 for P/N example) Assembly Part Number
Base Number
API Flanges J090030
RF Flanges J092888
RTJ Flanges J092889
Inlet/Outlet
Blind 1
1/2" NPT Tapped 2
(Ring Groove Seal)
2" 3000/5000 UNIBOLT Positive Choke
(Ring-Groove Seal)
J092908- X 00 X X X X XXXXX- X 00 X XX X
Alloy Steel 1
Stainless Steel 2
Inlet Conn Body
2" SCH XXH BW 1
2" SCH 160 BW 2
2" NPT Threaded 4
2" SCH XXH BW 1
2" SCH 160 BW 2
2" SCH 80 BW 3
2" NPT Threaded 4
Service
Standard 0
NACE 1
Blind 1
1/2" NPT Tapped 2
Blind 1
1/2" NPT Tapped 2
Alloy Steel 1
Stainless Steel 2
Service
Standard 0
NACE 1
Threaded x Threaded Flanged x Flanged Threaded x UNIBOLT Flanged x UNIBOLT
INLET
INLET INLET
INLET
OUTLET
OUTLET
OUTLET
OUTLET
UNIBOLT x UNIBOLT Flanged x Flanged
How to Order
Flow Beans Ordered Separately - see pg 149-150)
2-1/16" 3000 2" 300 RF 2" 600 RTJ 11
2-1/16" 5000 2" 600 RF 2" 900 RTJ 22
2-9/16" 3000 2" 900 RF 2" 1500 RTJ 33
2-9/16" 5000 2" 1500 RF 2" 2500 RTJ 44
2-1/16" 2000 3" 300 RF 3" 600 RTJ 55
3-1/8" 5000 4" 600 RF 3" 900 RTJ 66
3-1/8" 3000 3" 600 RF 3" 1500 RTJ 77
2" 150 RF 3" 2500 RTJ 88
4" 1500 RTJ 99
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
P O S I T I V E C H O K E S T HORNHI L L CRAVE R
2" 10,000lb UNIBOLT Positive Choke
(Ring-Groove Type or Taper-Type Seal)
XXXXX X 00 X XX X
Alloy Steel 1
Stainless Steel 2
Inlet/Outlet
1-13/16" 10,000 11
2-1/16" 10,000 22
2-9/16" 10,000 33
3-1/16" 10,000
(Ring-Groove 44
Type Seal Only)
Base Number
Ring-Groove Seal 90704
Taper-Type Seal 90729
Service
Standard 0
NACE 1
Blind 1
1/2" NPT Tapped 2
2" 10,000 UNIBOLT Positive Choke
(Ring-Groove Type or Taper-Type Seal)
API Flanged Inlet x UNIBOLT Outlet
XXXXX- X 00 X X X X
Alloy Steel 1
Stainless Steel 2
Service
Standard 0
NACE 1
Blind 1
1/2" NPT Tapped 2
Inlet Conn Body
1-13/16" 10,000 1
2-1/16" 10,000
(Ring-Groove 2
Type Seal Only)
Base Number
Ring-Groove Seal 90708
Taper-Type Seal 92907
2" SCH XXH BW 1
2" SCH 160 BW 2
2" SCH 80 BW 3
2-1/2" SCH XXH BW 4
2-1/2" 1.10" ID BW 5
2-1/2" 1.38" ID BW 6
2-1/2" SCH 160 BW 7
(Ring-Groove Type Seal)
90710- X 00 X X X X
Alloy Steel 1
Stainless Steel 2
Service
Standard 0
NACE 1
Blind 1
1/2" NPT Tapped 2
2" SCH XXH BW 1
2" SCH 160 BW 2
2" SCH 80 BW 3
2-1/2" SCH XXH BW 4
2-1/2" 1.10" ID BW 5
2-1/2" 1.38" ID BW 6
2-1/2" SCH 160 BW 7
2" SCH XXH BW 1
2" SCH 160 BW 2
2-1/2" SCH XXH BW 4
2-1/2" 1.10" ID BW 5
2-1/2" 1.38" ID BW 6
2-1/2" SCH 160 BW 7
2" 15,000 UNIBOLT Positive Choke (Taper-Type Seal)
J090730- X 00 X XX X
Inlet/Outlet
1-13/16" 15,000 11
2-1/16" 15,000 22
2-9/16" 15,000 33
Blind 1
Tapped F/9/16"
2
Autoclave Fitting
Body Material
Alloy Steel 1
Stainless Steel 2
Service
Standard 0
NACE 1
UNIBOLT x UNIBOLT
Flanged x Flanged
Flanged x Flanged
Flanged x UNIBOLT
How to Order
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
(Taper-Type Seal) 2" Max Open
2-9/16" 5000 3" 300 RF 3" 600 RTJ 11
3-1/8" 5000 3" 600 RF 3" 900 RTJ 22
4-1/16" 5000 3" 900 RF 3" 1500 RTJ 33
3-1/8" 3000 3" 1500 RF 4" 600 RTJ 44
2-1/16" 5000 4" 300 RF 4" 900 RTJ 55
4" 600 RF 4" 1500 RTJ 66
4" 900 RF 77
4" 1500 RF 88
Base Number
API Flanges 90108
RF Flanges 93091
RTJ Flanges 93376
Inlet/Outlet
XXXXX- X 00 X XX X
Blind 1
1/2" NPT Tapped 2
Blind 1
1/2" NPT Tapped 2
Alloy Steel 1
Stainless Steel 2
Service
Standard 0
NACE 1
3" SCH 160 BW 4" SCH 160 BW 2
3" SCH 80 BW 4" SCH 80 BW 3
3" NPT 4" NPT
4
Threaded Threaded
Outlet Connection/Plain Hub
3" SCH 160 BW 4" SCH 160 BW 2
3" SCH 80 BW 4" SCH 80 BW 3
3" NPT 4" NPT
4
Threaded Threaded
Inlet Connection/Plain Hub
XXXXX- X 00 X X X X
Alloy Steel 1
Stainless Steel 2
Service
Standard 0
NACE 1
90432- X 00 X XX X
Inlet/Outlet
2-9/16" 10,000 11
3-1/16" 10,000 22
4-1/16" 10,000 33
Blind 1
1/2" NPT Tapped 2
Alloy Steel 1
Stainless Steel 2
Service
Standard 0
NACE 1
Base Number
3" Plain Hub 93278
4" Plain Hub 90315
UNIBOLT x UNIBOLT
Flanged x Flanged
Flanged x Flanged
How to Order
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
P O S I T I V E C H O K E F L O W B E A N S T HORNHI L L CRAVE R
Model
Part Name Material
Order
Number Number
TC-3862 *Bean size
1
/64" through 1" Alloy Steel 90654-OXX
TC-3862-12CR *Bean size
1
/64" through 1" 12 CR SS 90655-OXX
TC-3890 *Bean size
1
/64" through
3
/4", with Ceramic Insert Alloy Steel 90659-OXX
TC-3863 *Bean size
1
/64" through
3
/4", with Carbide Insert 12 CR SS 92334-OXX
TC-4237 O Ring for Positive Bean 05521-220
Positive Beans 10,000 lb CWP/15,000lb CWP UNIBOLT Positive Chokes with
Taper-Type Seal or Cage Nipple Only
Model
Part Name Material
Order
Number Number
TC-2850 Positive Bean (65/65-128/64) Alloy Steel 90111-XXX
TC-2850 Positive Bean (65/65-128/64) 12 CR SS 90112-XXX
TC-3257* Master Bean (to hold 1/64- 64/64) Alloy Steel 90590-001
TC-3257* Master Bean (to hold 1/64- 64/64) 12 CR SS 90590-002
TC-3257* Master Bean (to hold 1/64- 64/64) Tungsten Carbide 90591-002
TC-3367 Positive Bean (65/65-128/64)
Tungsten Carbide
**
Insert
O Ring 05520-230
Positive Beans for 2" Maximum Opening Chokes
Note: To order Beans, specify Base Part Number and Size in fractional
increments of
1
/64".
Example: TC-3863. Carbide
1
/64"; Part # = 92334-001.
Order separately for above beans.
**Use TC-1003P Style Beans with this Master Bean.
**For Part Number, please consult factory.
*Order separately for above beans.
How to Order (Please specify part number/size when ordering)
Select proper Base Part NumberPrefix + xxx (size)Suffix
Example: 90111-120 (120/64)
TC-2850 Positive
Bean for 3,000 lb
CWP, 5,000 lb CWP,
and 10,000 lb CWP.
2" maximum open
Positive Choke w/
Taper-Type Seal.
TC-3862 "O" Ring
Type Positive Bean
Assembly for 6,500
lb CWP, 10,000 lb
CWP, 15,000 lb CWP,
and 20,000 lb CWP.
Positive Chokes w/
Taper-Type Seal.
TC-3257 Master
Bean for use with
3,000 lb CWP, 5,000
lb CWP, and 10,000
lb CWP. 2" maximum
Opening Positive
Choke w/ Taper-Type
Seal. Threaded to
receive TC-1003P
Positive Bean.
SD-10906 SD-10906
SD-10906
Note: Flow Beans are ordered and shipped separately from positive choke assemblies.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
T HORNHI L L CRAVE R P O S I T I V E C H O K E F L O W B E A N S
Model
Part Name Material
Order
Number Number
TC-1003P Specify Size
1
/64" through 1" Alloy Steel 90031-OXX
TC-1003P Specify Size
1
TC-574 Master Bean, threaded to receive TC-575 Bean Insert Alloy Steel 90568-001
TC-574 Master Bean, threaded to receive TC-575 Bean Insert 12 CR SS 90568-002
TC-575
Bean insert for Master Bean TC-574 and 573,
Alloy Steel 90571-OXX
sizes
1
/64" through
1
/4"
TC-2742 Beans with Ceramic Inserts, sizes
1
/64" through
3
/4" Alloy Steel 90586-OXX
TC-2742 Beans with Ceramic Inserts, sizes
1
/64" through
3
/4" 12 CR SS 90587-OXX
TC-3444 Beans with Carbide Inserts, sizes
1
TC-1016
Gasket 90016-002
TC-576
Gasket F/TC-575 Bean Insert 90508-002

Flow Beans for UNIBOLT Positive Chokes with Ring-Groove Seal
3000/5000/10,000 lb CWP
Model
Part Name Material
Order
Number Number
TC-1017M Specify Size
1
/64" through
7
/8" Alloy Steel 90537-OXX
TC-1017M Specify Size
1
/64" through
7
/8" 12 CR SS 90538-OXX
TC-573 Master Bean, threaded to receive Bean Insert Alloy Steel 90567-001
TC-573 Master Bean, threaded to receive Bean Insert 12 CR SS 90567-002
TC-3445 Beans with Carbide Inserts, sizes 1/64" through 5/8" 12 CR SS 92333-OXX
TC-1019
Gasket 90173-002
Flow Beans 2000 lb CWP UNIBOLT Positive Chokes with
Taper-Type Seal or Cage Nipple Only
Note: To order, use Base Part Number (XXXXX) + size in increments
of
1
/64". Example: TC-1003P = Base Number 90031-010 (size
10
/64").
Supplied with beanspart # listed for replacement orders.
Not included with bean insert.

Note: To order, use Base Part Number (XXXXX) + size in increments of
1
/64". Example: TC-1003P = Base Number 90031-010 (size
10
/64").
Not included with beansorder separately for 2000lb.

TC-1003P
Flow Bean
TC-574
Master Bean
TC-1017M
Flow Bean
TC-573
Master Bean
TC-575
Bean Insert
SD-10906 SD-10906
SD-10906
SD-10906 SD-10906
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
X B E A N S A N D S E A T / B E A N W R E N C H E S T HORNHI L L CRAVE R
UNIBOLT X Beans Specifications
Since the advent of proration there has been an inherent need
for a quick, easy, means of accurately proportioning the flow of
oil or gas through Positive Chokes. UNIBOLT X Flow Beans,
whose orifices are gauged in percentage increments of well
flow rather than in fractional inch sizes, provide the operator
with a means of flowing any given quantity of fluid or gas from
a well with a degree of accuracy never before attained by
Positive Chokes.
Precise Flow Control - Since the well flow is directly pro-
portionate to the orifice in the Flow Bean, a change, for exam-
ple, from a
1
/64" bean to a 2/64" Bean results in a 300%
increase in area. By contrast a change from a UNIBOLT X-1
Bean to an X-2 Bean results in an increase of only 10%. The
larger size and X-28 to X-405 (approximately
13
/64") for 6"
Beans, are available in half sizes, 5% increments, and are desig-
nated as X-285, X-295, X-305, X-315 (for 6" Bean) etc.
UNIBOLT X Beans are available in 74 sizes in flow
Forged Steel Wrench with spring-hook grip.
For 3,000/5,000/10,000 lb CWP
Model Number: TC-800
Order Number: 90959
Forged Steel Wrench
for 3,000/5,000/10,000 lb CWP.
2" Maximum Opening Adjustable Choke
Order Number: 90955
SD-10894
SD-10894
Special Wrench for handling
UNIBOLT Bean Inserts.
Order Number: 90949
Wrench (Not pictured) for 2000 lb seat/beans
Order Number: 90948
SD-10894
TO ORDER TC-575 INSERTS:
Select "X" size from circular chart. Use Base Part
Number (Prefix) 90569 + "X" Size (Suffix).
90508-001 Bean gasket required.
EXAMPLES:
90569-038 (X038)
90569-385 (X385)
increments of 5% and 10%. There are 56 sizes of X Beans now
available to take the place of the 13 fractional sizes up to X-42
(approximately
14
/64").
Renewable Bean inserts up to and including X-42
(approximately
14
/64") are furnished as economical, renewable
inserts; however, X-43 and larger Beans are available in stan-
dard full 6" length, drilled full length.
File-Hard Beans UNIBOLT X Beans are heat-treated to
produce a minimum hardness of 60 Rockwell C and thus
assure long, trouble-free service.
No Complicated Flow Computation Required - Because
UNIBOLT X Beans are gauged in flow increments of 10%, the
proper size Bean can be easily determined. If, for example, a
well flows 100 barrels through a given size X Bean, the next
larger or smaller size X Bean will result in approximately a
10% increase or decrease, whichever is desired. This is not pos-
sible with beans drilled in fractional increments of
1
/64".
Choke Seat and Bean Wrenches
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
T HORNHI L L CRAVE R C H O K E Y O K E A S S E M B L I E S
3,000/
10,000 lb CWP
Description 5,000 lb CWP
Order Number
Order Number
Alloy Steel Yoke/
92892-111 92894-111
Stem,
1
/2" Ind.
Alloy Steel Yoke/
92892-112 92894-112
Stem,
3
/4" Ind.
Alloy Steel Yoke/
92892-113 92894-113
Stem, 1" Ind.
Alloy Steel Yoke/
92892-121 92894-121
12 CR SS Stem,
1
/2" Ind.
Alloy Steel Yoke/
92892-122 92894-122
12 CR SS Stem,
3
/4" Ind.
Alloy Steel Yoke/
92892-123 92894-123
12 CR SS Stem, 1" Ind.
Alloy Steel Yoke/Tungsten
92892-131 92894-131
Carbide Stem,
1
/2" Ind.
92892-132 92894-132
Carbide Stem,
3
/4" Ind.
92892-133 92894-133
Carbide Stem, 1" Ind.
12 CR SS Yoke/
92892-221 92894-221
Stem,
1
/2" Ind.
12 CR SS Yoke/
92892-222 92894-222
Stem,
3
/4" Ind.
12 CR SS Yoke/
92892-223 92894-223
Stem, 1" Ind.
12 CR SS Yoke/Tungsten
92892-231 92894-231
Carbide Stem,
1
/2" Ind.
92892-232 92894-232
Carbide Stem,
3
/4" Ind.
92892-233 92894-233
2" 3,000/5,000/10,000 lbs CWP
Ring-Groove Seal Design Chokes
Description
2,000 lb CWP 10,000 lb CWP 15,000 lb CWP 20,000 lb CWP
Order Number Order Number Order Number Order Number
Alloy Steel Yoke/Stem
92897-111 92896-111
1
/2" Ind.
Alloy Steel Yoke/Stem,
92897-112 92896-112
3
/4" Ind.
92896-113
1" Ind.
Alloy Steel Yoke/
92897-121 92896-121
12 CR SS Stem,
1
/2" Ind.
Alloy Steel Yoke/
92897-122 92896-122
12 CR SS Stem,
3
/4" Ind.
Alloy Steel Yoke/
92896-123
92896-131
Carbide Stem,
1
/2" Ind.
92896-132
Carbide Stem,
3
/4" Ind.
92896-133
12 CR SS Yoke/
92896-221 92899-221 92902-221
Stem,
1
/2" Ind.
12 CR SS Yoke/
92896-222 92899-222 92902-222
Stem,
3
/4" Ind.
12 CR SS Yoke/
92896-223
Stem, 1" Ind.
92896-231 92899-231 92902-231
Carbide Stem,
1
/2" Ind.
92896-232 92899-232 92902-232
Carbide Stem,
3
/4" Ind.
92896-233
2" 2,000/10,000/15,000/20,000 lbs CWP
Taper-Type Seal Design Chokes
3,000/
6,500 lb CWP 10,000 lb CWP 15,000 lb CWP
Description 5,000 lb CWP
Order Number Order Number Order Number
Order Number
Alloy Steel Yoke/Stem
92893-111 92898-111 92895-111
1
/2" Ind.
92893-112 92898-112 92895-112
3
/4" Ind.
92893-113 92898-113 92895-113
1" Ind.
Alloy Steel Yoke/
92893-121 92898-121 92895-121
12 CR SS Stem,
1
/2" Ind.
Alloy Steel Yoke/
92893-122 92898-122 92895-122
12 CR SS Stem,
3
/4" Ind.
Alloy Steel Yoke/
92893-123 92898-123 92895-123
92893-131 92898-131 92895-131 92900-131
Carbide Stem,
1
/2" Ind.
92893-132 92898-132 92895-132 92900-132
Carbide Stem,
3
/4" Ind.
92893-133 92898-133 92895-133
12 CR SS Yoke/
92893-221 92898-221 92895-221 92900-221
Stem,
1
/2" Ind.
12 CR SS Yoke/
92893-222 92898-222 92895-222 92900-222
Stem,
3
/4" Ind.
12 CR SS Yoke/
92893-223 92898-223 92895-223
Stem, 1" Ind.
92893-231 92898-231 92895-231 92900-231
Carbide Stem,
1
/2" Ind.
92893-232 92898-232 92895-232 92900-232
Carbide Stem,
3
/4" Ind.
92893-233 92898-233 92895-233
Long Nose Heater Choke Yoke Assemblies
2" 3,000/5,000/6,500/10,000/15,000 lbs CWP
Ring-Groove and Taper-Type Seal Design Chokes
Description
3,000/5,000 lb CWP
Order Number
Alloy Steel Yoke and Stem 92903-111
Alloy Steel Yoke/
92903-112
12 CR SS Stem
Alloy Steel Yoke/
92903-113
Tungsten Carbide Stem
12 CR SS Yoke/Stem 92903-121
12 CR SS Yoke/
92903-122
Tungsten Carbide Stem
Yoke Assemblies
2" Maximum Opening Chokes
Yoke Bonnet Assembly
with Handwheel
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
P N E U M A T I C A D A P T E R A S S E M B L I E S T HORNHI L L CRAVE R
Automation and Remote Control Devices
Available
Pneumatically Operated Chokes
Pneumatic actuators can be used to regulate flow (water, oil
and gas) or can be used as safety valves. An adapter allows a
diaphragm actuator to be incorporated, used with either air or
gas. When automation or remote control is desired, a process
controller is used to change pressure behind the diaphragm,
which operates the choke, regulating the flow rate.
Two types of mounting brackets are availablehorizontal
and vertical. Our standard mounting is vertical (in line with
yoke hub) which has distinct advantages:
In some working pressures and sizes, the actuator is large and
heavy, which can make it difficult to change the stem and seat
in the choke. With vertical mounting it is not necessary to
remove the actuator to change the choke trim. Disconnection
of the linkage is the only requirement.
The vertical-mounted actuator takes up less room, an advan-
tage on offshore platforms and other applications.
Yoke Adapter Assembly Description Stainless Steel Stem Tungsten Carbide Stem
2" 3000 lb CWP or 5000# CWP Regular Choke with Ring Groove Seal
92910-120 92910-130
for Fisher Size 45 Actuator
2" 3000 lb CWP or 5000# CWP Heat Choke with Ring Groove Seal
92911-120 92911-130
2" 6500 lb CWP Heater Choke with Taper Type Seal
92917-120 92917-130
2" 10,000 lb CWP Regular Choke with Ring Groove Seal
92913-120 92913-130
2" 10,000 lb CWP Heater Choke with Ring Groove Seal
92916-120 92916-130
2" 10,000 lb CWP Regular Choke with Taper Type Seal
92909-120 92909-130
2" 15,000 lb CWP Regular Choke with Taper Type Seal
92914-120 92914-130
2" 15,000 lb CWP Heater Choke with Taper Type Seal
93209-120 93209-130
3" 5,000 lb CWP Force Balanced Choke
93180-121 93180-131
Yoke Adapter Assemblies for Fisher Pneumatic Operation for
UNIBOLT Regular and Heater Chokes 3000/5000/6500/10,000/15,000 lb CWP
Note: UNIBOLT Chokes may be adapted for Actuators of other
manufacturers upon request.
SD-10900
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
T HORNHI L L CRAVE R U N I B OLT H I G H P R E S S U R E S T E E L C O U P L I N G S
Size
With SS
Seal Ring
Order
Number
1" 91379-001 91379-002
2" 90189-001 90189-002
2-1/2" 91380-001 91380-002
3" 91381-001 91381-002
4" 91382-001 91382-002
5"* 91377-001 91377-002
3000 lb/5000 lb WP, Threaded Only
Order Numbers
*Coupling available for 3000 psi only.
Size Order Number
Sch. 40 91389-001
Sch. 80 91390-001
Sch. 160 91391-001
XXH 91392-001
XXH 90193-001
3000 lb. WP, 5" and 6" Butt Weld Only
Order Numbers
Size Order Number
2-1/2" XXXH 91589-001
XXH 91590-001
15,000 lb WP, 2-1/2" Butt Weld Only
Order Numbers
Size Schedule
With SS
Seal Ring
Order
Number
Sch. 80 91394-001 91394-002
1" Sch. 160 91397-001 91397-002
XXH 91402-001 91402-002
Sch. 40 91591-001 91591-002
2"
Sch. 80 90195-001 90195-002
Sch. 160 90194-001 90194-002
XXH 90193-001 90193-002
Sch. 40 91593-001
2-1/2"
Sch. 80 91395-001 91395-002
Sch. 160 91398-001 91398-002
XXH 91403-001 91403-002
Sch. 40 91592-001 91592-002
3"
Sch. 80 90237-001 90237-002
Sch. 160 90236-001 90236-002
XXH 90235-001 90235-002
Sch. 80 91396-001 91396-002
4" Sch. 160 91399-001 91399-002
XXH 91404-001 91404-002
3000 lb/5000 lb WP, 1"-4" Butt Weld Only
Order Numbers
Size Schedule
With SS
Seal Ring
Order
Number
5"
Sch. 160 91397-001 91397-002
XXH 91402-001 90193-002
6"
Sch. 160 91398-001 90194-002
XXH 90193-001 90193-002
5000 lb WP, 5"and 6" Butt Weld Only
Order Numbers
Size Schedule
With SS
Seal Ring
Order
Number
2"
Sch. 160 91407-001 91407-002
XXH 90200-001 90200-002
2-1/2"
XXXH 91585-001
XXH 91408-001 91408-002
3" XXH 91586-001 91586-002
4" XXH 91587-001 91587-002
5" XXH 91588-001 91588-002
10,000 lb WP, 2"-5" Butt Weld Only
Order Numbers
5"
6"
Nom.
3,000 psi 3000 psi 5,000 psi 5,000 psi
Size
Sch 40 Sch 80 Sch 160 Sch XXH
Bore Bore Bore Bore
1 0.957 0.815 0.599
2 2.067 1.939 1.689 1.503
2-1/2 2.469 2.323 2.125 1.771
3 3.068 2.900 2.626 2.300
4 3.826 3.438 3.152
Nom.
3,000 psi 3,000 psi 3,000 psi 3,000 psi
Size
Sch 40 Sch 80 Sch 160 Sch XXH
Bore Bore Bore Bore
5
*
5.047 4.813 4.313 4.063
6* 4.897
Nom.
5,000 psi 5,000 psi
Size
Sch 160 Sch XXH
Bore Bore
5
*
4.313 4.063
6
*
5.189 4.897
Nom.
10,000 psi 10,000 psi
Size
Sch 160 Sch XXH
Bore Bore
2 1.689 1.503
2-1/2 1.771
3 2.300
4 3.152
Nom.
15,000 psi 15,000 psi
Size
Sch XXXH 1.1 ID
Bore Bore
2-1/2 1.38 1.10
Pipe Bore Chart
*These sizes require two bolts
UNIBOLT Blanking Plugs are interchangeable with Plain Hubs, and are
furnished: Blind, 1/2" NPT or tapped for Bleeder Plug. Most sizes avail-
able with Blanking Plug and PLUGLOK instead of plain hub. PLUGLOK
Safety System is standard when Blanking Plug ordered. Consult factory
for how to order.
Butt weld coupling with
Blind Blanking Plug
3,000 lb UNIBOLT Butt weld
Steel Coupling
Blind 1/2" NPT Bleeder Plug
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
U N I B OLT H I G H P R E S S U R E S T E E L C O U P L I N G S T HORNHI L L CRAVE R
Dimension
Nom.
Size
X Z
1 1-3/4 2 3-27/32 1-5/8 3-3/8 2-1/8 1-5/8 1.049 4 TC-853 TC-648 3/8 x 2-3/4
2 2-3/8 2-5/8 5-1/8 2-7/8 5-3/8 3-1/8 2-7/16 2 12-1/2 TC-544 TC-562 1/2 x 3-3/4
2-1/2 3 3-1/8 6-1/4 3-3/8 6-1/8 3-5/8 2-7/8 2-1/2 20-1/4 TC-545 TC-563 5/8 x 4-1/4
3 3 3-1/8 6-1/4 4-3/16 6-3/4 4-1/16 2-7/8 3 24 TC-546 TC-564 5/8 x 4-3/4
4 4 4-1/4 8-3/8 5-1/2 8-11/16 5-3/16 3-1/2 4 53 TC-547 TC-754 3/4 x 5-1/4
5 5 5-1/8 10-6/16 6-1/2 10-1/2 6-1/8 4-1/16 5 83 TC-578 TC-566 3/4 x 5-3/4
Dimensional Data (inches), 3000 lb/5000 lb WP, Threaded
Y O H D
Special Tee Head
Bolts and Nuts
E J
TC
Ring
Number
Model
Number
Size
Coupling
Weight,
Lbs.
Dimension
Nom.
Size
X Z
1 2-1/8 2-1/2 4-23/32 1.315 3-3/8 2-1/8 1-5/8 4 TC-853 TC-648 3/8 x 2-3/4
2 2-5/8 3-3/8 6-1/8 2-3/8 5-3/8 3-1/8 2-7/16 15 TC-544 TC-562 1/2 x 3-3/4
2-1/2 3 3-7/8 7 2-7/8 6-1/8 3-5/8 2-7/8 24 TC-545 TC-563 5/8 x 4-1/4
3 3 1/2 4 7-5/8 3-1/2 6-3/4 4-1/16 2-7/8 30 TC-546 TC-564 5/8 x 4-3/4
4 4 5-3/8 9-9/16 4-1/2 8-11/16 5-3/16 3-1/2 60 TC-547 TC-754 3/4 x 5-1/4
3,000 lb. CWP
*5 5 5-1/8 10-5/16 5-5/8 10-1/2 6-1/8 4-1/16 89 TC-578 TC-566 3/4 x 5-3/4
*6
4 3/16 5 1/8 9-1/2 6-5/8 10-1/2 6-1/8 4-1/16 90 TC-578 TC-566 3/4 x 5-3/4
5,000 lb. CWP
*5 5 6-1/2 11-5/8 5-9/16 11-9/16 6-5/8 5 149 TC-578 TC-339 3/4 x 6-3/4
*6
5 6-1/2 11-5/8 6-5/8 11-9/16 6-5/8 5 139 TC-578 TC-339 3/4 x 6-3/4
10,000 LB. WP
2 3-1/4 3-3/4 7-1/8 2-3/8 5-3/16 3-13/32 2-3/4 20-1/2 TC-610 TC-563 5/8 x 4-1/4
2-1/2 3-1/4 4 7-3/8 2-7/8 5-5/16 3-13/32 2-3/4 21-1/2 TC-610 TC-563 5/8 x 4-1/4
3 1-5/16 4-1/2 8-5/8 3-1/2 6-11/16 4-7/32 3-9/16 38-1/2 TC-611 TC-754 3/4 x 5-1/4
4 5-1/4 6 11-1/2 4-1/2 8-7/8 5-11/16 4-1/2 85 TC-613 TC-634 1 x 7
5 7-1/2 8-1/2 16-1/4 5-9/16 12-5/16 7-1/4 6-1/2 216 TC-1633 TC-1920 1-1/4 x10-1/2
15,000 LB. WP
2-1/2 3-1/4 4 7-5/16 2-7/8 5-13/16 3-1/2 2-7/8 23-1/2 TC-2187 TC-3376 5/8 x 3-3/4
Dimensional Data (inches), 3000 lb/5000 lb/10,000 lb/15,000 lb WP, Butt Weld
Y O H D
Special Tee Head
Bolts and Nuts
E J
TC
Ring
Number
Model
Number
Size
Coupling
Weight,
Lbs.
* These Sizes Require Two Bolts
Available for Butt-Weld to 6" XX Heavy Only

See Pipe
Bore
Chart on
previous
page
Threaded End 3,000/5,000
Butt weld end
10,000/15,000
Butt weld end
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
F OS T E R
D - S E A L G A T E V A L V E S
Dimensional Data (inches) and Weights (lbs)
A B C D E
Valve
Class
End-To-End Nominal CL-To- CL-To- Handwheel Approx.
Size (in) Bore Bottom Top Diameter Weight
RTJ RF
(in) (in) (in) (in) (lbs)
150 7
1
/2 7 2
1
/16 5
3
/4 18
1
/4 14 50
300 9
1
/8 8
1
/2 2
1
/16 5
3
/4 18
1
/4 14 75
2"
400 11
5
/8 11
1
/2 2
1
/16 6 18
1
/4 14 100
600 11
5
/8 11
1
/2 2
1
/16 6 18
1
/4 14 100
900 14
5
/8 14
1
/2 2
1
/16 6 18
5
/8 14 225
1500 14
5
/8 14
1
/2 2
1
/16 6 18
5
/8 14 225
150 8 7
1
/2 2
9
/16 7
1
/4 22
7
/8 14 60
300 10
1
/8 9
1
/2 2
9
/16 7
1
/4 22
7
/8 14 100
2
1
/2"
400 13
1
/8 13 2
9
/16 7
1
/2 22
7
/8 14 140
600 13
1
/2 13 2
9
/16 7
1
/2 22
7
/8 14 140
900 16
5
/8 16
1
/2 2
9
/16 7
1
/2 23
1
/2 14 250
1500 16
5
/8 16
1
/2 2
9
/16 7
1
/2 23
1
/2 14 250
150 8
1
/2 8 3
1
/8 8
1
/4 26 14 75
300 11
3
/4 11
1
/8 3
1
/8 8
1
/4 26 14 150
3"
400 14
1
/8 14 3
1
/8 8
1
/2 26 14 175
600 14
1
/8 14 3
1
/8 8
1
/2 26 14 175
900 15
1
/8 15 3
1
/8 9 26
3
/4 14 275
1500 18
5
/8 18
1
/2 3
1
/8 9 26
3
/4 14 350
150 9
1
/2 9 4
1
/16 11 30 14 125
300 12
5
/8 12 4
1
/16 11 30 14 200
4"
400 16
1
/8 16 4
1
/16 11
1
/4 30 14 250
600 17
1
/8 17 4
1
/16 11
1
/4 30 14 325
900 18
1
/8 18 4
1
/16 11
1
/2 31
1
/2 14 450
1500 21
5
/8 21
1
/2 4
1
/16 11
1
/2 31
1
/2 18 675
150 11 10
1
/2 6 13
3
/8 42 22 225
300 16
1
/2 15
7
/8 6 13
3
/8 42 22 375
6"
400 19
5
/8 19
1
/2 6 13
3
/8 42 22 550
600 22
1
/8 22 6 13
3
/8 42 22 675
900 24
1
/8 24 6 13
5
/8 44
5
/8 22 850
1500 28 27
3
/4 6 14
5
/8 49 24
(3)
1350
150 12 11
1
/2 8 16
1
/2 49
1
/4 22 350
300 17
1
/8 16
1
/2 8 16
1
/2 49
1
/4 22 575
8"
400 23
5
/8 23
1
/2 8 16
1
/2 49
1
/4 22 825
600 26
1
/8 26 8 16
1
/2 49
1
/4 22 1075
900 29
1
/8 29 8 16
3
/4 52 30 1550
1500 33
1
/8 32
3
/4 7
5
/8 18
1
/4 54
1
/2 24
(3)
2450
150 13
1
/2 13 10 19
5
/8 62 22 550
300 18
5
/8 18 10 19
5
/8 62 22 875
10"
400 26
5
/8 26
1
/2 10 19
5
/8 62 22 400
600 31
1
/8 31 10 19
5
/8 62 30 1950
900 33
1
/8 33 10 20 64
1
/4 30 2600
1500 39
3
/8 39 9
1
/2 22
1
/4 67 24
(3)
4250
150 14
1
/2 14 12
(1)
22
7
/8 62 22 775
300 20
3
/8 19
3
/4 12
(1)
22
7
/8 62 22 1250
12"
400 30
1
/8 30 12
(1)
22
7
/8 62 30 2050
600 33
1
/8 33 12
(1)
22
7
/8 62 30 2550
900 38
1
/8 38 12
(1)
23
3
/4 64
1
/4 24
(3)
3750
1500 45
1
/8 44
1
/2 11
3
/8 26
3
/8 67 24
(3)
6500
150 15
1
/2 15 13
1
/4 25 71
3
/4 30 975
300 30
5
/8 30 13
1
/4 25
1
/2 71
3
/4 30 2050
14"
400 32
5
/8 32
1
/2 13
1
/4 25
1
/2 71
3
/4 30 5925
600 35
1
/8 35 13
1
/4 26 71
3
/4 24
(3)
3350
900 44
7
/8 40
1
/2 12
3
/4 26 74
7
/8 24
(3)
5125
1500 50
1
/4 49
1
/2 12
1
/2 29 77 36
(3)
9150
150 16
1
/2 16 15
1
/4 27
1
/8 79
1
/2 36 1150
300 33
5
/8 33 15
1
/4 27
5
/8 79
1
/2 36 2475
16"
400 35
5
/8 35
1
/2 15
1
/4 27
5
/8 79
1
/2 24
(3)
2880
600 39
1
/8 39 15
1
/4 28
5
/8 79
1
/2 24
(3)
4000
900 44
7
/8 44
1
/2 14
3
/4 28
5
/8 82
1
/2 36
(3)
6350
1500 55
3
/8 54
1
/2 14
1
/4 32
1
/2 85
5
/8 36
(3)
11500
150 17
1
/2 17 17
1
/4 30
1
/8 84
3
/8 24
(3)
1475
300 36
5
/8 36 17
1
/4 30
3
/4 84
3
/8 24
(3)
3325
18"
400 38
5
/8 38
1
/2 17
1
/4 30
3
/4 84
3
/8 24
(3)
3750
600 43
1
/8 43 17
1
/4 31
7
/8 84
3
/8 36
(3)
5325
900 48
1
/2 48 16
3
/4 31
7
/8 86
7
/8 36
(3)
8100
1500 60
1
/2
150 18
1
/2 18 19
1
/4 33
1
/2 93
3
/4 24
(3)
2125
300 39
3
/4 39 19
1
/4 34
1
/2 93
3
/4 24
(3)
4850
20"
400 41
3
/4 41
1
/2 19
1
/4 34
1
/2 93
3
/4 24
(3)
6300
600 47
1
/4 47 19
1
/4 37 93
3
/4 36
(3)
7450
900 52
1
/2 52 18
5
/8 37 98
3
/8 36
(3)
11675
1500 65
1
/2
150 20
1
/2 20 23
1
/4 40
3
/4 109
3
/4 24
(3)
2750
300 45
7
/8 45 23
1
/4 41
1
/4 109
3
/4 24
(3)
7450
24"
400 48
7
/8 48
1
/2 23
1
/4 41
1
/4 109
3
/4 36
(3)
8850
600 55
3
/8 55 23
1
/4 44
1
/2 109
3
/4 36
(3)
12025
900 61
3
/4 61 22
1
/2 44
1
/2 118
1
/4 36
(3)
18850
1500 76
1
/2
All requirements should be stated
at the time of purchase with the
understanding that, if not other-
wise specified on the order, Cooper
Cameron Valves may supply the
valve standard with respect to
materials, end connections, etc.
The following information should
be furnished:
1. Name of valve: D-Seal.
2. Quantity.
3. Size (pipe size bore size).
4. Pressure class.
5. End connection (if weld end,
specify grade and wall of pipe).
6. Trim (see page 157).
7. Method of operation: hand-
wheel, bevel gear or power actu-
ator.
8. Service conditions: type of
installation, working pressure
and temperature, lading, pres-
ence of corrosive or abrasive
conditions.
9. Delivery requirements.
How to Order
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
F OS T E R
D - S E A L G A T E V A L V E S
Trim Material Specifications
Service
Trim Body &
Gate
Primary Secondary Stem Seat
Stem Bolting Fittings
Code Bonnet Seat Seat Seal Elastomers
Standard Service
Carbon Steel Carbon Steel with Carbon Steel with
Fluoromyte Viton 17-4PH Carbon
-20 to 250F
FT-7 Carbon Steel with Electroless Electroless Nickel Plate Electroless Nickel Plate
Lip Seals (Fluorocarbon) Stainless
Alloy Steel
Steel
Nickel Plate & Filled TFE Insert & Filled TFE Insert
Mild Corrosive
and Sour Service
FT-8 Carbon Steel with Electroless Electroless Nickel Plate Electroless Nickel Plate
Fluoromyte Viton 17-4PH Alloy Steel Stainless
(H
2
S & CO
2
)
Lip Seals (Fluorocarbon) Stainless NACE Steel
-20 to 250F
Highly Corrosive
Stainless Steel with
Service
FT-9
Stainless Stainless
Stellite 6 Hardface
Stainless Steel with Fluoromyte Viton 17-4PH Alloy Steel Stainless
Full Stainless Steel Steel
& Filled TFE Insert
Filled TFE Insert Lip Seals (Fluorocarbon) Stainless NACE Steel
-20 to 250F
Waterflood Carbon Steel Carbon Steel Carbon Steel with Carbon Steel with
Fluoromyte Nitrile 17-4PH Stainless
Service FT-10 with Internal with Electroless Electroless Nickel Plate Electroless Nickel Plate
Lip Seals (BUNA-A) Stainless
Alloy Steel
Steel
-20 to 250F Plastic Coating Nickel Plate & Filled TFE Insert & Filled TFE Insert
MTBE Service
High
(less than 40%
FT-14 Carbon Steel with Electroless Electroless Nickel Plate Electroless Nickel Plate Filled TFE
Fluorine 17-4PH
Alloy Steel
Carbon
concentration)
Content Stainless Steel
-20 to 250F Viton
MTBE Service
Virgin
(greater than 40%
FT-17 Carbon Steel with Electroless Electroless Nickel Plate Electroless Nickel Plate Filled TFE
TFE with 17-4PH
Alloy Steel
Carbon
concentration)
Eligiloy Stainless Steel
-20 to 400F Spring
Anhydrous Carbon Steel Carbon Steel with Carbon Steel with Ethylene Alloy
Alloy Steel Stainless
Ammonia Service FT-19 Carbon Steel with Electroless Electroless Nickel Plate Electroless Nickel Plate Propylene Neoprene Steel
NACE Steel
-20 to 250F Nickel Plate & Filled TFE Insert & Filled TFE Insert Lip Seals Molycoat
Low Temperature
Carbon Steel
Fluoromyte Low Temp 17-4PH Alloy Steel Stainless
Standard Service FT-36
Impact Tested
with Electroless Electroless Nickel Plate Electroless Nickel Plate
Lip Seals Nitrile Stainless Low Temp Steel
-50 to 250F Nickel Plate & Filled TFE Insert & Filled TFE Insert
Low Temperature
Carbon Steel Carbon Steel Carbon Steel with Carbon Steel with Alloy Steel
Sour Service
FT-37 Impact Tested with Electroless Electroless Nickel Plate Electroless Nickel Plate
Fluoromyte
Epichlorohydrin
17-4PH
Low Temp
Stainless
(H
2
S & CO
2
)
NACE Nickel Plate & Filled TFE Insert & Filled TFE Insert
Lip Seals Stainless
NACE
Steel
-50 to 250F
Service
Trim Body &
Gate
Primary Secondary Stem Seat
Stem Bolting Fittings
Code Bonnet Seat Seat Seal Elastomers
Standard Service Carbon Steel
Filled LGarde Y267 17-4PH Stainless
-20 to 550F
FT-1 Carbon Steel
Nitrided
with Stellite 6 Molycoat with
TFE (EPDM) Stainless
Alloy Steel
Steel
Hardface Molycoat Filled TFE Insert
Mild Corrosive
Carbon Steel
Service FT-2 Carbon Steel
with Stellite 6
with Stellite 6 Molycoat with
Filled LGarde Y267 17-4PH
Alloy Steel
Stainless
-20 to 550F
Hardface
Hardface Molycoat Filled TFE Insert
TFE (EPDM) Stainless Steel
Molycoat
Mild Corrosive Stainless Steel Stainless Steel Stainless Steel
Filled LGarde Y267 Inconel Stainless
Service FT-2A Carbon Steel with Stellite 6 with Stellite 6 with Filled
TFE (EPDM) 625
Alloy Steel
Steel
-20 to 550F Hardface Hardface TFE Insert
Extreme Corrosive Carbon Steel Stainless Steel Stainless Steel Stainless Steel
Filled LGarde Y267 17-4PH Stainless
Service FT-6 with Inconel with Stellite 6 with Stellite 6 with Filled
TFE (EPDM) Stainless
Alloy Steel
Steel
-20 to 550F 625 Lined Bore Hardface Hardface TFE Insert
Extreme Corrosive Carbon Steel Stainless Steel Stainless Steel Stainless Steel
Filled LGarde Y267 Inconel Stainless
Service FT-6A with Inconel with Stellite 6 with Stellite 6 with Filled
TFE (EPDM) 625
Alloy Steel
Steel
-20 to 550F 625 Lined Bore Hardface Hardface TFE Insert
Pipeline Service
Geothermal Service
(1)
Materials shown are for reference purposes only and are subject
to change. Cooper Cameron Valves reserves the right to substitute
equivalent materials, if necessary.
(2)
Special trims and materials are available.
(3)
Abbreviations: H
2
SHydrogen Sulfide; CO
2
Carbon Dioxide.
(4)
-75F available on request.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
No. of Holes
Hole Diameter
Mounting holes straddle
Dia.
E
F
G
H
J
B
C
D
A
K
L
M
N
P
R
Dia.
Dia.
Depth
Dia.
Thread
Stem Thread
S
T
= Maximum axial thrust (Lbs.)
= Maximum torque (Ft-Lbs.)
Operating Data:
F OS T E R A C T U A T I O N D A T A
Size A B C D E F G H J K L M N P R S T
2 900
3
/4"-6 STUB ACME-LH 6.53 3.00 N/A N/A N/A 3.50 4 .56 4.75 2.323 .328 1.25 0.75
1
/2" 13 2615 12
2 1500
3
1
/2" 13 6825 32
3 150
3
1
/2" 13 900 4
3 300
3
1
/2" 13 2350 11
3 600
3
1
/2" 13 4150 20
3 900
3
1
/2" 13 6225 30
4 150 1"-5 STUB ACME-LH 10.65 5.00 0.84 0.319 .250 4.50 4 .56 5.75 2.878 .396 1.50 0.75
1
/2" 13 1110 7
4 300 1"-5 STUB ACME-LH 10.65 5.00 0.84 0.319 .250 4.50 4 .56 5.75 2.880 .401 1.63 0.75
1
/2" 13 2910 18
4 600 1"-5 STUB ACME-LH 10.65 5.00 0.84 0.319 .250 4.50 4 .56 5.75 2.883 .401 1.63 0.75
1
/2" 13 6125 35
4 900 1"-5 STUB ACME-LH 10.65 5.00 0.84 0.319 .250 4.50 4 .56 5.75 2.883 .401 1.63 0.75
1
/2" 13 9200 55
4 1500 1"-5 STUB ACME-LH 10.87 5.25 0.84 0.319 .250 4.50 4 .56 5.75 2.883 .401 1.63 0.75
1
/2" 13 16650 200
6 150 1"-5 STUB ACME-LH 12.59 7.00 0.84 0.319 .250 4.50 4 .56 5.75 2.883 .401 1.63 0.75
1
/2" 13 2000 12
6 300 1"-5 STUB ACME-LH 12.59 7.00 0.84 0.319 .250 4.50 4 .56 5.75 2.883 .401 1.63 0.75
1
/2" 13 5250 30
6 600 1
1
/4"-5 STUB ACME-LH 13.42 7.00 1.19 0.457 .250 5.50 4 .69 7.00 4.260 .156 2.38 0.97
5
/8" 11 10900 75
6 900 1
1
/4"-5 STUB ACME-LH 13.42 7.00 1.19 0.457 .250 5.50 4 .69 7.00 4.260 .156 2.38 0.97
5
/8" 11 16350 115
6 1500 1
1
/2"- 4 ACME-2G-LH 11.00 7.50 1.56 0.464 .375 5.50 4 .69 7.00 4.260 .156 2.38 0.97
5
/8" 11 31350 260
8 150 1"-5 STUB ACME-LH 24.64 9.00 0.84 0.319 .250 4.50 4 .56 5.75 2.883 .401 1.63 0.75
1
/2" 13 3150 20
8 300 1"-5 STUB ACME-LH 14.64 9.00 0.84 0.319 .250 4.50 4 .56 5.75 2.883 .401 1.63 0.75
1
/2" 13 8250 50
8 600 1
1
/4"-5 STUB ACME-LH 15.30 9.00 1.19 0.457 .250 5.50 4 .69 7.00 4.260 .156 2.38 0.97
5
/8" 11 16650 120
8 900 1
1
/4"-5 STUB ACME-LH 15.30 9.12 1.19 0.457 .250 5.50 4 .69 7.00 4.260 .156 2.38 0.97
5
/8" 11 26350 180
8 1500 1
3
/4"- 4 ACME-2G-LH 14.58 9.25 1.81 0.598 .375 6.50 4 .81 8.19 5.010 .250 3.11 1.22
3
/4" 10 48895 451
10 150 1
1
/4"-5 STUB ACME-LH 17.42 11.00 1.19 0.457 .250 5.50 4 .69 7.00 4.260 .156 2.38 0.97
5
/8" 11 4550 30
10 300 1
1
/4"-5 STUB ACME-LH 17.42 11.00 1.19 0.457 .250 5.50 4 .69 7.00 4.260 .156 2.38 0.97
5
/8" 11 12000 85
10 600 1
1
/2"- 4 ACME-2G-LH 19.70 11.00 1.56 0.464 .375 5.50 4 .69 7.00 4.260 .156 2.38 0.97
5
/8" 11 24825 206
10 900 1
1
/2"- 4 ACME-2G-LH 19.70 11.38 1.56 0.464 .375 5.50 4 .69 7.00 4.260 .156 2.38 0.97
5
/8" 11 38325 320
10 1500 2
1
/4"-.25P-.50L-ACME-2G-LH 16.22 11.25 2.00 0.770 .500 6.50 4 .81 8.19 5.010 .250 3.11 1.37
3
/4" 10 72175 1040
12 150 1
1
/4"-5 STUB ACME-LH 19.42 13.00 1.19 0.457 .250 5.50 4 .69 7.00 4.260 .156 2.38 0.97
5
/8" 11 6230 320
12 300 1
1
/4"-5 STUB ACME-LH 19.42 13.00 1.19 0.457 .250 5.50 4 .69 7.00 4.260 .156 2.38 0.97
5
/8" 11 16300 115
12 400 1
1
/2"- 4 ACME-2G-LH 19.70 13.38 1.56 0.464 .375 5.50 4 .69 7.00 4.260 .156 2.38 0.97
5
/8" 11 23540 195
12 600 1
1
/2"- 4 ACME-2G-LH 19.70 13.38 1.56 0.464 .375 5.50 4 .69 7.00 4.260 .156 2.38 0.97
5
/8" 11 35300 300
12 900 1
3
/4"- 4 ACME-2G-LH 19.04 13.75 1.81 0.598 .375 6.50 4 .81 8.19 5.010 .250 3.11 1.22
3
/4" 10 56960 525
12 1500 2
1
/2"-.25P-.50L-ACME-2G-LH 21.00 14.38 2.31 0.820 .625 10.00 8 .69 11.56 6.010 .250 5.50 1.13
5
/8" 11 115300 1765
14 150 1
3
/4"-.20P-.40L-ACME-2G-LH 19.42 14.63 1.81 0.598 .375 5.50 4 .69 7.00 3.760 .156 2.65 0.97
3
/4" 10 8425 96
14 300 1
3
/4"-.20P-.40L-ACME-2G-LH 19.42 14.63 1.81 0.598 .375 5.50 4 .69 7.00 3.760 .156 2.65 0.97
3
/4" 10 22055 250
14 600 2"-.25P-.50L-ACME-2G-LH 20.47 15.00 2.25 0.651 .500 6.50 4 .81 8.19 5.010 .250 3.25 1.37
3
/4" 10 47750 648
14 900 2"-.25P-.50L-ACME-2G-LH 20.47 15.00 2.25 0.651 .500 6.50 4 .81 8.19 5.010 .250 3.25 1.37
3
/4" 10 71625 972
16 150 1
3
/4"-.20P-.40L-ACME-2G-LH 21.37 16.63 1.81 0.598 .375 5.50 4 .69 7.00 3.760 .156 2.65 0.97
5
/8" 11 10750 125
16 300 1
3
/4"-.20P-.40L-ACME-2G-LH 21.37 16.63 1.81 0.598 .375 5.50 4 .69 7.00 3.760 .156 2.65 0.97
5
/8" 11 28060 320
16 400 1
3
/4"-.20P-.40L-ACME-2G-LH 21.37 16.63 1.81 0.598 .375 6.50 4 .81 8.19 5.010 .250 3.11 1.22
3
/4" 10 35600 400
16 600 1
3
/4"-.20P-.40L-ACME-2G-LH 21.37 16.63 1.81 0.598 .375 6.50 4 .81 8.19 5.010 .250 3.11 1.22
3
/4" 10 53400 600
16 900 2
1
/4"-.25P-.50L-ACME-2G-LH 22.02 17.00 2.00 0.770 .500 6.50 4 .81 8.19 5.010 .250 3.11 1.37
3
/4" 10 85300 1225
18 150 2"-.25P-.50L-ACME-2G-LH 23.97 18.00 2.25 0.651 .500 6.50 4 .81 8.19 5.010 .250 3.11 1.22
3
/4" 10 13210 180
18 300 2"-.25P-.50L-ACME-2G-LH 23.97 18.00 2.25 0.651 .500 6.50 4 .81 8.19 5.010 .250 3.11 1.22
3
/4" 10 34586 469
18 600 2
1
/2"-.25P-.50L-ACME-2G-LH 26.00 19.25 2.31 0.820 .625 10.00 8 .69 11.56 6.010 .250 5.50 1.13
5
/8" 11 73625 1125
20 150 2"-.25P-.50L-ACME-2G-LH 26.19 20.75 2.25 0.651 .500 6.50 4 .81 8.19 5.010 .250 3.25 1.37
3
/4" 10 16180 200
20 300 2"-.25P-.50L-ACME-2G-LH 26.19 20.75 2.25 0.651 .500 6.50 4 .81 8.19 5.010 .250 3.25 1.37
3
/4" 10 42370 575
20 600 2
3
/4"-.25P-.50L-ACME-2G-LH 29.92 21.25 3.25 0.949 .625 11.75 8 .81 13.50 7.010 .250 4.50 1.13
3
/4" 10 88240 1432
20 900 2
3
/4"-.25P-.50L-ACME-2G-LH 29.92 21.25 3.25 0.949 .625 11.75 8 .81 13.50 7.010 .250 4.50 1.13
3
/4" 10 132360 2148
24 150 2
3
/4"-.25P-.50L-ACME-2G-LH 30.25 24.75 2.25 0.770 .500 6.50 4 .81 8.19 5.010 .250 3.25 1.37
3
/4" 10 2705 325
24 300 2
1
/4"-.25P-.50L-ACME-2G-LH 30.25 24.75 2.25 0.770 .500 6.50 4 .81 8.19 5.010 .250 3.25 1.37
3
/4" 10 59475 855
24 600 3
1
/4"-.33P-.67L-ACME-2G-LH 34.75 25.50 4.19 1.117 .750 11.75 8 .81 13.50 7.010 .250 4.50 1.13
3
/4" 10 126900 2565
24 900 3
1
/4"-.33P-.67L-ACME-2G-LH 34.75 25.50 4.19 1.117 .750 14.00 8 1.38 16.50 8.510 .250 7.25 2.13 1
1
/4" 7 190350 3850
28 150 2
1
/4"-.25P-.50L-ACME-2G-LH 34.45 28.50 2.25 0.770 .500 6.50 4 .81 8.19 5.010 .250 3.25 1.37
3
/4" 10 30000 432
36 300 2
3
/4"-.25P-.50L-ACME-2G-LH 45.38 36.75 3.25 0.949 .625 11.75 8 .81 13.50 7.010 .250 4.50 1.13
3
/4" 10 124850 2025
40 300 3
1
/4"-.33P-.67L-ACME-2G-LH 49.47 41.00 4.19 1.117 .750 11.75 8 .81 13.50 7.010 .250 4.50 1.13
3
/4" 10 154240 3118
Actuator Interface Data (inches)
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
F OS T E R A C T U A T I O N D A T A
HWO Option BGO Operator Option
No. HW Rim Model Main Spur HW Rim Trq. No.
Turns Dia. Pull No. Gear Gear Dia. Pull @BGO Turns
Valve
Stem Torque
Stroke
Stem Stem
Stem Thread
Thrust Ft-Lbs Pitch Lead
2 150 499 2 3.00 0.167 0.167
3
/4"-6 STUB ACME-LH 10.0 10 6 N/A N/A N/A N/A N/A N/A N/A
2 300 1307 6 3.00 0.167 0.167
3
2 600 2613 12 3.00 0.167 0.167
3
2 900 4095 19 3.00 0.167 0.167
3
2 1500 6824 32 3.00 0.167 0.167
3
3 150 898 4 4.00 0.167 0.167
3
/4"-6 STUB ACME-LH 24.0 10.25 9 N/A N/A N/A N/A N/A N/A N/A
3 300 2350 11 4.00 0.167 0.167
3
/4"-6 STUB ACME-LH 24.0 10.25 26 N/A N/A N/A N/A N/A N/A N/A
3 600 4149 20 4.00 0.167 0.167
3
3 900 6223 30 4.00 0.167 0.167
3
4 150 1110 7 5.00 0.200 0.200 1"-5 STUB ACME-LH 25.0 14 12 N/A N/A N/A N/A N/A N/A N/A
6 600 10905 76 7.00 0.200 0.200 1
1
/4"-5 STUB ACME-LH 35.0 22 83 B320-10 3 N/A 24 28 28 105
6 900 16358 114 7.00 0.200 0.200 1
1
/4"-5 STUB ACME-LH 35.0 22 124 B320-10 3 N/A 24 42 42 105
6 1500 31350 260 7.50 0.250 0.250 1
1
/2"- 4NA-2G-LH 30.0 N/A N/A B320-20 4 N/A 24 72 72 120
8 150 3150 19 9.00 0.200 0.200 1"-5 STUB ACME-LH 45.0 17 27 B320-10 3 N/A 24 7 7 135
8 300 8250 50 9.00 0.200 0.200 1"-5 STUB ACME-LH 45.0 17 71 B320-10 3 N/A 24 19 19 135
8 600 16668 118 9.00 0.200 0.200 1
1
/4"-5 STUB ACME-LH 45.0 26 109 B320-10 3 N/A 24 44 44 135
8 900 26358 184 9.12 0.200 0.200 1
1
/4"-5 STUB ACME-LH 45.6 26 170 B320-10 3 N/A 24 68 68 137
8 1500 48895 451 9.25 0.250 0.250 1
3
/4"- 4NA-2G-LH 37.0 N/A N/A B320-40 4 N/A 24 125 125 148
10 150 4559 32 11.00 0.200 0.200 1
1
/4"-5 STUB ACME-LH 55.0 26 30 B320-10 3 N/A 24 12 12 165
10 300 11938 83 11.00 0.200 0.200 1
1
/4"-5 STUB ACME-LH 55.0 26 77 B320-10 3 N/A 24 31 31 165
10 600 24825 206 11.00 0.250 0.250 1
1
/2"- 4NA-2G-LH 44.0 30 165 B320-20 4 N/A 24 57 57 176
10 900 38325 320 11.38 0.250 0.250 1
1
/2"- 4NA-2G-LH 45.5 30 256 B320-20 4 N/A 24 89 89 182
10 1500 72158 1040 11.25 0.250 0.500 2
1
/4"-.25P-.50L-2G-LH 22.5 N/A N/A B320-40 6 N/A 24 193 193 135
12 150 6230 43 13.00 0.200 0.200 1
1
/4"-5 STUB ACME-LH 65.0 26 40 B320-10 3 N/A 24 16 16 195
12 300 16311 114 13.00 0.200 0.200 1
1
/4"-5 STUB ACME-LH 65.0 26 105 B320-10 3 N/A 24 42 42 195
12 400 23540 195 13.38 0.250 0.250 1
1
/2"- 4NA-2G-LH 53.5 30 156 B320-20 4 N/A 24 54 54 214
12 600 35310 293 13.38 0.250 0.250 1
1
/2"- 4NA-2G-LH 53.5 30 234 B320-20 4 N/A 24 81 81 214
12 900 56960 525 13.75 0.250 0.250 1
3
/4"- 4NA-2G-LH 55.0 36 350 B320-40 4 N/A 24 146 146 220
12 1500 115300 1765 14.38 0.250 0.500 2
1
/2"-.25P-.50L-2G-LH 28.8 N/A N/A B320-50 6
(2)
36 218 327 173
14 150 8423 96 14.63 0.200 0.400 1
3
/4"-.20P-.40L-2G-LH 36.6 26 89 B320-30 4 N/A 24 27 27 146
14 300 22055 250 14.63 0.200 0.400 1
3
/4"-.20P-.40L-2G-LH 36.6 26 231 B320-30 4 N/A 24 69 69 146
14 600 47750 648 15.00 0.250 0.500 2"-.25P-.50L-2G-LH 30.0 36 432 B320-40 4 N/A 24 180 180 120
14 900 71625 972 15.00 0.250 0.500 2"-.25P-.50L-2G-LH 30.0 36 648 B320-40 6 N/A 24 180 180 180
16 150 10720 122 16.63 0.200 0.400 1
3
/4"-.20P-.40L-2G-LH 41.6 26 113 B320-30 4 N/A 24 34 34 166
16 300 28067 320 16.63 0.200 0.400 1
3
/4"-.20P-.40L-2G-LH 41.6 26 295 B320-30 4 N/A 24 89 89 166
16 400 35615 404 16.63 0.200 0.400 1
3
/4"-.20P-.40L-2G-LH 41.6 36 269 B320-40 4 N/A 24 112 112 166
16 600 53422 606 16.63 0.200 0.400 1
3
/4"-.20P-.40L-2G-LH 41.6 36 404 B320-40 4 N/A 24 168 168 166
16 900 85300 1229 17.00 0.250 0.500 2
1
/4"-.25P-.50L-2G-LH 34.0 N/A N/A B320-40 4
(1)
36 228 341 136
18 150 13210 179 18.63 0.250 0.500 2"-.25P-.50L-2G-LH 37.3 36 119 B320-40 4 N/A 24 50 50 149
18 300 34586 469 18.63 0.250 0.500 2"-.25P-.50L-2G-LH 37.3 36 313 B320-40 4 N/A 24 130 130 149
18 600 73625 1128 19.25 0.250 0.500 2
1
/2"-.25P-.50L-2G-LH 38.5 N/A N/A B320-50 6
(2)
36 139 209 231
20 150 16185 220 20.75 0.250 0.500 2"-.25P-.50L-2G-LH 41.5 36 147 B320-40 4 N/A 24 61 61 166
20 300 42369 575 20.75 0.250 0.500 2"-.25P-.50L-2G-LH 41.5 36 383 B320-40 4 N/A 24 160 160 166
20 600 88240 1432 21.25 0.250 0.500 2
3
/4"-.25P-.50L-2G-LH 42.5 42 818 B320-70 6 N/A 36 177 265 255
20 900 132360 2148 21.25 0.250 0.500 2
3
/4"-.25P-.50L-2G-LH 42.5 42 1227 B320-70 6
(1)
36 265 398 255
24 150 22715 327 24.75 0.250 0.500 2
1
/4"-.25P-.50L-2G-LH 49.5 36 218 B320-40 4 N/A 36 61 91 198
24 300 59472 857 24.75 0.250 0.500 2
1
/4"-.25P-.50L-2G-LH 49.5 36 571 B320-40 4 N/A 36 159 238 198
24 600 126903 2568 25.50 0.333 0.667 3
1
/4"-.33P-.67L-2G-LH 38.2 48 1284 B320-70 8
(1)
36 238 357 306
24 900 190355 3848 25.50 0.333 0.667 3
1
/4"-.33P-.67L-2G-LH 38.2 48 1924 B320-80 8
(1)
36 356 534 306
28 150 30000 432 28.50 0.250 0.500 2
1
/4"-.25P-.50L-2G-LH 57.0 N/A N/A B320-40 4
(1)
36 80 120 228
36 300 124850 2025 36.75 0.250 0.500 2
3
/4"-.25P-.50L-2G-LH 73.5 N/A N/A B320-70 6
(1)
36 250 375 441
40 300 154240 3118 41.00 0.333 0.667 3
1
/4"-.33P-.67L-2G-LH 61.5 N/A N/A B320-70 8
(1)
36 289 433 492
Actuation Data (inches)
(1)
Spur gears will reduce input rim pull but the number of turns will
increase, spur gear ratio available varies with BGO used.
(2)
Ratio previously was 4:1, replaced by 6:1 ratio when Limitorque
discontinued 4:1 ratio option.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
P O W - R - S E A L
G A T E V A L V E S
All requirements should be stated at the time of purchase with
the understanding that, if not otherwise specified on the order,
Cooper Cameron Valves may supply the valve standard in respect
to materials, end connections, etc. The following information
should be furnished:
1. Name of valve: Pow-R-Seal.
2. Quantity.
3. Size (pipe size bore size).
How to Order
2"- 4" Exploded View 6"- 12" Exploded View 14"- 36" Exploded View
Parts Detail
4. Pressure class.
5. End connection (if weld end, specify grade and wall of pipe).
6. Trim (see page 161).
7. Method of operation: handwheel, bevel gear or power actuator.
8. Service conditions: type of installation, working pressure
and temperature, lading, presence of corrosive or abrasive
conditions.
9. Delivery requirements.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
(p170)
G A T E V A L V E S
Service
Trim Body &
Gate & Segment Seat Stem Seal Stem Bolting Fittings
Code Bonnet
Standard
Carbon Steel (300-600) Carbon Steel, TFE Low Alloy
Carbon
-20 to 250F
T-11 Carbon Steel Low Alloy Steel (900) Nickel Plated, Chevron Steel Alloy Steel
Steel
Nickel Plated TFE Insert Seals Nickel Plated
MTBE
Carbon Steel (300-600) Carbon Steel, TFE Low Alloy
Carbon
-20 to 250F
T-102 Carbon Steel Low Alloy Steel (900) Nickel Plated, Chevron Steel Alloy Steel
Steel
Nickel Plated TFE Insert Seals Nickel Plated
Sour, Mildly Carbon Steel (300-600) Carbon Steel, Fluoromyte Low Alloy
Alloy Steel, Stainless
Corrosive, MTBE T-24 Carbon Steel Low Alloy Steel (900) Nickel Plated, Lip Steel
NACE Steel
-20 to 250F Nickel Plated TFE Insert Seals Nickel Plated
Water flood, Sour
Carbon Steel Carbon Steel (300-600) Carbon Steel, Fluoromyte Low Alloy
Alloy Steel, Stainless
-20 to 250F
T-10 Internal Plastic Low Alloy Steel (900) Nickel Plated Lip Steel
NACE Steel
Coating Nickel Plated TFE Insert Seals Nickel Plated
High Temperature
Carbon Steel (300-600)
Carbon Steel 40% Filled Alloy Steel, Stainless
-20 to 550F
T-30 Carbon Steel Low Alloy Steel (900)
HF-6 hard face TFE
17-4PH, NACE
NACE Steel
HF-6 hard face
High Temperature Low Alloy
400 Series Stainless Low Alloy
Flexible 400 Series Stainless
-20 to 1000F*
T-31
Steel
Steel Steel, HF-6
Graphite Stainless Steel
Alloy Steel
Steel
HF-6 hard face hard face
Low Temperature Carbon Steel Carbon Steel (300-600) Carbon Steel,
Fluoromyte
Low Alloy Alloy Steel,
Sour, MTBE T37 Charpy Impact Low Alloy Steel (900) Nickel Plated,
Lip
Steel, Charpy Impact Stainless
-50 to 250F* Tested Nickel Plated TFE Insert
Seals
Impact Tested, Tested, Steel
Nickel Plated NACE
General Trim Chart for W-K-M Pow-R-Seal Gate Valves (6" - 36")
Notes:
1) CCV reserves the right to substitute equivalent Materials.
2) Contact your local representative or the Missouri City Plant for
detail trim charts or applications not listed.
3) MTBE labeled trims are suitable for Methyl Tertiary Butyl Ethylene
in concentrations up to 100%.
4) Sour denotes trims which conform to NACE MR-01-75.
Class
300 600 900 1500 2500
2" 2" 2" 2"
3" 3" 3" 3"
4" 4" 4" 4"
6" 6" 6" 6" 6"
8" 8" 8"
10 10" 10"
12" 12" 12"
14" 14" 14" 14"
16" 16" 16"
18" 18"
20" 20" 20"
24" 24" 24"
30" 30"
36" 36"
API Standard 6D Valves
* Trim chart for high temperature OPG design
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
P O W - R - S E A L
G A T E V A L V E S
Class 600
2 11
1
/2 2
1
/16 4
13
/16 17
3
/4 12 16 90 72 84
3 14 3
3
/16 6
15
/16 23
7
/8 12 20 180 144 155
4 17 4
1
/8 8
5
/8 27 14 20 345 259 245
Wt., Lb.
Size A B F G H N*
FE WE F W
Class 900
2 14
1
/2 2
1
/16 5
1
/16 17
3
/4 12 16 150 72 105
3 15 3
3
/16 7
5
/16 23
7
/8 12 20 265 193 247
4 18 4
1
/8 9
1
/16 28
1
/2 18 20 515 390 417
Wt., Lb
Size A B F G H N*
FE WE F W
Class 1500
2 14
1
/2 2
1
/16 5
1
/16 17
3
/4 12 16 150 72 105
3 18
1
/2 3
3
/16 7
5
/16 23
7
/8 12 20 295 215 242
4 21
1
/2 4
1
/8 9
1
/16 28
1
/2 18 20 530 403 325
Wt., Lb.
Size A B F G H N*
FE WE F W
Class 2500
2 17
3
/4 1
13
/16 5
13
/16 20
5
/8 12 12 220 105 154
3 22
3
/4 2
9
/16 8
1
/8 25
7
/8 14 18 450 328 370
4 26
1
/4 3
1
/16 9
1
/4 29
5
/8 24 23 720 547 583
Wt., Lb
Size A B F G H N*
FE WE F W
2" 4" Handwheel Operated
Note: Flange dimensions conform to American National Standards
Institute Standard B16.5, 1981. Information on power-actuated and
other types of valves available on application.
*N = No. of turns of Handwheel to fully open or close valve.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
(p172)
G A T E V A L V E S
6" 12" Handwheel Operated and Bevel Gear Operated
Class 400
6 19
1
/2 6 12
1
/2 45
1
/4 46
1
/4 24 30
11
/16 29 114 490 430 480 533 473 523 26
7
/8
8 23
1
/2 8 15
3
/8 57
1
/4 56
1
/4 24 36
11
/16 37 146 950 650 685 875 660 742 32
10 26
1
/2 10 19
5
/8 64
3
/4 66
1
/8 30 45
3
/16 34 203 1400 1255 1305 1578 1348 1473 42
1
/8
12 30 12 22
3
/4 73
1
/4 74
5
/8 30 51
11
/16 40 239 1975 1745 1915 2045 1690 1860 45
1
/2
12 30 12
3
/8 22
3
/4 73
1
/4 74
5
/8 30 51
11
/16 40 239 1975 1745 1915 2045 1690 1860 45
1
/2
Size A B F
G G H
K
N* N*
J
(HWO) (BGO) Dia. (HWO) (BGO)
*N = No. of turns of Handwheel or Bevel Gear Operator Handwheel to
fully open or close valve.
Geothermal valve dimensions.
Wt., Lb (HWO) Wt., Lb (BGO)
FE WE F W FE WE F W
Class 300
6 15
7
/8 6 12
1
/2 45
1
/4 46
1
/4 24 30
11
/16 29 114 472 397 400 500 445 470 26
7
/8
8 16
1
/2 8 16 57
1
/4 56
1
/4 24 36
11
/16 37 146 853 751 805 903 845 895 32
10 18 10 20 63
1
/4 64
1
/4 24 44
11
/16 45 180 1345 1200 1273 1475 1380 1448 42
1
/8
12 30 12 22
3
/4 73
3
/8 74
5
/8 30 51
11
/16 40 239 1950 1670 1880 45
1
/2
12 30 12
3
/8 22
3
/4 73
3
/8 74
5
/8 30 51
11
/16 40 239 1950 1670 1880 45
1
/2
Size A B F
G G H
K
N* N*
J
Wt., Lb. (HWO) Wt., Lb. (BGO)
FE WE F W FE WE F W
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
G A T E V A L V E S
Class 600
6 22 6 12
5
/8 45
1
/4 46
1
/4 24 30
11
/16 29 114 595 495 545 695 575 635 26
7
/8
8 26 8 15
1
/2 57
1
/4 56
1
/4 24 36
11
/16 37 146 1028 730 865 1075 895 990 32
10 31 10 19
3
/4 64
7
/8 66
1
/8 30 45
3
/16 34 203 1735 1370 1505 1895 1585 1835 42
1
/8
12 33 12 23 73
3
/8 74
5
/8 30 51
11
/16 40 239 3030 2360 2680 2525 2250 2360 45
1
/2
12 33 12
3
/8 23 73
3
/8 74
5
/8 30 51
11
/16 40 239 3030 2360 2680 2525 2250 2360 45
1
/2
Size A B F
G G H
K
N* N*
J
Wt., Lb. (HWO) Wt., Lb, (BGO)
FE WE F W FE WE F W
Class 900
6 24 6 12
7
/8 45
1
/4 46
1
/4 24 30
3
/4 29 114 743 577 625 805 565 680 26
7
/8
8 29 8 15
3
/4 57
1
/4 56
1
/4 24 36
3
/4 37 146 1272 1040 1180 1329 1180 1238 32
10 33 10 20
1
/8 64
7
/8 66
1
/8 30 45
1
/4 34 203 2250 1930 2085 2315 1875 2185 42
1
/8
12 38 12 23
1
/2 73
3
/4 30 56
5
/8 40 318 3392 2725 2860 3600 2880 3276 45
1
/2
12 38 12
3
/8 23
1
/2 73
3
/4 56
5
/8 40 318 3392 2725 2860 3600 2880 3276 45
1
/2
Size A B F
G G H
K
N* N*
J
FE WE F W FE WE F W
Class 1500
6 27
3
/4 4
11
/16 14
3
/4 46
1
/4 46
1
/4 30 32
7
/8
8 32
3
/4 7
1
/2 18
11
/16 59
13
/16 59
13
/16 30 38
11
/16
10 39 9
1
/4 22
5
/16 68
3
/8 68
3
/8 30 51
9
/16
12 44
1
/2 10
1
/4 26
1
/16 76
15
/16 76
15
/16 30 56
7
/16
Size A B F
G G H
K
N* N*
J
For Geothermal valve, 10".
FE WE F W FE WE F W
Class 2500
6 36 5
1
/2 14
13
/16 41
7
/8 41
7
/8 30 29
15
/16
8 40
1
/4 7
3
/16 17
1
/2 41 41 30 35
3
/16
10 50 8
1
/2 20
7
/8 68
3
/8 68
3
/8 30 43
12 56 10
1
/8 26
1
/16 77 77 30 56
5
/8
Size A B F
G G H
K
N* N*
J
FE WE F W FE WE F W
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
G A T E V A L V E S
Class 300
14 30 13
1
/4 25
1
/4 65
7
/8 53 177 2632 2230 2500
16 33 15 28
1
/8 83
9
/16 58
3
/8 167 3450 3015 3310
18 36 17 31 86
13
/16 65
5
/16 190 4650 4260 4375
20 39 18
3
/4 35
1
/4 106
1
/4 73
7
/8 211 6248 5780 6000
24 45 22
3
/4 42 115
3
/4 86
3
/8 253 10678 9550 10240
26 49 25
1
/4 45
1
/8 122 93
1
/2 275 12600 12015 12300
28
30 60 29
1
/2 53 143
7
/8 107
3
/4 318 16000 14670 15600
36 68 34
5
/8 63
1
/2 185
3
/4 130
5
/8 558 30000 28000 28000
Wt., Lb.
Size A B F G K N*
FE WE F W
14" 36" Bevel Gear Operated
Institute Standard B16.5, 1981. Information on additional sizes and
pressures, power-actuated and other types of valves available on
application.
*N = No. of turns of Handwheel to fully open or close wheel.
End-to-end distance on weld-end valve is 60".
Class 400
14 32
1
/2 13
1
/4 25
1
/4 69
3
/4 53
1
/2 177 2900 2340 2672
16 35
1
/2 15 28
1
/8 81
1
/8 61
1
/4 167 3610 2631 2990
18 38
1
/2 17 31
3
/8 86
1
/2 66
5
/8 190 5006 4450 4530
20 41
1
/2 18
3
/4 35
1
/2 98
1
/8 73
7
/8 211 6390 5875 6135
24 48
1
/2 22
3
/4 41
7
/8 113
1
/2 87
7
/8 253 11934 10275 11134
26 51
1
/2 25
1
/4 44
5
/8 122 93
1
/2 275 12753 11530 11860
28 55 26
5
/8 48
1
/4 137
3
/4 102
1
/2 18360 16510 17115
30 60 28
5
/8 53 142 107
1
/2 318 22948 19968 21250
36 74 34
5
/8 63
1
/2 170
3
/4 130
5
/8
Wt., Lb.
Size A B F G K N*
FE WE F W
application.
Class 600
14 35 13
1
/4 25
9
/16 69
3
/4 53
1
/2 177 3040 2931 3000
16 39 15 28
1
/8 81
1
/8 61
1
/4 167 4420 3950 4160
18 43 17 31
5
/8 86
1
/2 66
5
/8 190 5705 5115 5200
20 47 18
3
/4 36 98
1
/8 73
7
/8 211 7595 7115 6605
24 55 22
3
/4 42
1
/4 113
1
/2 87
7
/8 253 12994 11380 12730
26 57 25
1
/4 45
7
/8 122 93
1
/2 275 15583 13583 14380
28 61 26
5
/8 48
5
/8 137
3
/4 102
1
/2 20350 18400 19175
30 65 28
5
/8 53 142 107
1
/2 318 25000 23000 24000
36 82 34
5
/8 63
7
/8 170
3
/4 130
5
/8
Wt., Lb.
Size A B F G K N*
FE WE F W
application.
Class 900
14 40
1
/2 12
1
/2 26
1
/8 69
3
/4 53
1
/2 5200 4902 4902
16 44
1
/2 14
1
/4 30
1
/4 81
1
/8 66
5
/8 174 7346 6435 6956
18
20
24 61 22 44
1
/2 113
1
/2 87
7
/8
26
28
30
36
Wt., Lb.
Size A B F G K N*
FE WE F W
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
6 300 750 1.50 0.250 0.250 6626 82 8625 106 21711 267 7.19 29
6 600 1500 1.50 0.250 0.250 13252 163 17249 212 21711 267 7.19 29
6 900 2250 1.50 0.250 0.250 19878 245 25874 318 32594 401 7.19 29
8 300 750 1.75 0.250 0.250 10705 149 13190 183 27423 381 9.12 36
8 600 1500 1.75 0.250 0.250 21410 298 26379 367 27423 381 9.12 36
8 900 2250 1.75 0.250 0.250 32115 447 39569 550 42377 590 9.12 36
10 300 750 2.25 0.333 0.333 16462 296 20081 362 49745 896 11.31 34
10 600 1500 2.25 0.333 0.333 32924 593 40162 723 49745 896 11.31 34
10 900 2250 2.25 0.333 0.333 49386 889 60244 1085 76635 1380 11.31 34
12 300 750 2.25 0.333 0.333 21911 395 28416 512 67648 1218 13.38 40
12 300 750 2.25 0.333 0.333 23180 417 27147 489 67648 1218 13.38 40
12 600 1500 2.25 0.333 0.333 43822 789 56832 1023 67648 1218 13.38 40
12 600 1500 2.25 0.333 0.333 46360 835 54293 978 67648 1218 13.38 40
12 900 2250 2.25 0.333 0.333 65732 1184 85248 1535 86920 1565 13.38 40
12 900 2250 2.25 0.333 0.333 68683 1237 82297 1482 86920 1565 13.38 40
14 300 750 2.00 0.250 0.500 24833 425 32363 554 101825 1938 14.75 29.50
14 600 1500 2.00 0.250 0.500 49665 851 64726 1108 101825 1938 14.75 29.50
14 900 2250 2.25 0.333 0.333 70273 1132 104213 1679 127093 2276 14.75 44.29
16 300 750 2.50 0.400 0.800 32214 760 40107 947 141016 3699 16.69 20.86
16 600 1500 2.50 0.400 0.800 64428 1521 80215 1894 141016 3699 16.69 20.86
16 900 2250 2.50 0.400 0.800 88591 2091 151629 3579 176271 4161 16.69 20.86
18 300 750 2.50 0.400 0.800 40019 945 49898 1178 141016 3329 18.94 23.67
18 600 1500 2.50 0.400 0.800 80038 1889 99796 2358 141016 3329 18.94 23.67
18 900 2250 2.50 0.400 0.400 128042 2670 167251 3488 239891 5003 19.88 49.70
20 300 750 2.50 0.400 0.800 40019 945 49898 1178 141016 3329 18.94 23.67
20 300 750 2.75 0.400 0.800 48394 1217 62517 1572 180611 4541 21.13 26.41
20 600 1500 2.75 0.400 0.800 96789 2434 125034 3144 180611 4541 21.13 26.41
20 900 2250 3.00 0.400 0.400 147724 3105 187552 3943 239476 5034 21.13 52.81
22 300 750 3.00 0.400 0.800 61315 1626 74872 1986 225696 5986 23.25 29.06
22 600 1500 3.00 0.400 0.800 122630 3253 149745 3972 225696 5986 23.25 29.06
24 300 750 3.00 0.400 0.800 69328 1839 94567 2508 225696 5986 25.25 31.56
24 600 1500 3.00 .0.400 0.800 138656 3678 189134 5016 225696 5986 25.25 31.56
26 300 750 3.25 0.400 0.800 84717 2364 107963 3013 275770 7697 27.50 34.38
26 600 1500 3.25 0.400 0.800 169433 4729 215927 6027 275770 7697 27.50 34.38
30 300 750 3.50 0.400 0.800 111047 3254 145134 4253 331086 9702 31.75 39.69
30 600 1500 3.50 0.400 0.800 222094 6509 290267 8506 331086 9702 31.75 39.69
36 300 720 4.50 0.400 0.400 154484 4539 192348 5651 621389 18256 38.00 95.00
36 600 1500 4.50 0.400 0.400 321842 9455 400726 11773 621389 18256 38.00 95.00
G A T E V A L V E S
Valve Stem Stem Stem Rec. Rec. Block & Block & Max. Max.
Stem
Turns
Size
Class
Working Thread Thread Thread Opr. Opr. Bleed Bleed Opr. Opr.
Travel
To
(in) Pressure Size Pitch Lead* Thrust Torque Thrust Torque Thrust Torque
(in)
Open
(psig) (in) (in) (in) (lbf) (ft-lbf) (lbf) (ft-lbf) (lbf) (ft-lbf) Valve
Actuation Data
1. Recommended operating thrust and torque are the loads required to close the valve with full differential pressure across the
gate. The operator should be sized for these values.
2. Maximum allowance thrust and torque values are the maximum allowable loads for these valves.
3. WhenBlock and Bleed or Double Block and Bleed service is specified, operators should be sized for these values.
4. Unless otherwise stated, handwheel rim pull for manual and motor operators shall not exceed 120lbs.
5. Al torque and thrust values are based on maximum working pressure at ambient temperature.
6. Multiple lead threads may have been supplied in special cases. Verify thread leads before adapting operators.
7. Denotes seats which have oversize bores. The 12" 300-600 Class valves have 12.50" bores. 12" 900 Class valve has a 12.38"
bore. These are normally used for Geothermal Service.
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
G A T E V A L V E S
Actuator Interface Data (inches)
Valve
Class Model
ISO A-NA-2G-L.H.
B C D E F G H J K L M N P
Size FL Single Lead Thd.
6" 3/9C E1A F14 1
1
/2"-.250P-.250L 8.31 15.50 7.19 16.44 16.06 26.88 6.89 5.512 4-.69
3.955
2.50 1.03 .178
3.945
8" 3/9C E1A F14 1
3
/4"-.250P-.250L 8.44 17.56 9.12 18.94 18.56 32.00 6.89 5.512 4-.69
3.955
2.50 1.03 .178
3.945
10" 3/9C E1A F16 2
1
/4"-.333P-.333L 9.38 20.69 11.31 24.38 24.00 42.13 8.27 6.496 4-.81
5.230
3.12 1.50 .230
5.220
12" 3/6C E1A F16 2
1
/4"-.333P-.333L 11.50 24.88 13.38 26.06 25.69 45.44 8.27 6.496 4-.81
5.230
3.12 1.50 .230
5.220
12" 9C E1A F16 2
1
/4"-.333P-.333L 11.34 24.75 13.38 26.06 25.69 45.56 8.27 6.496 4-.81
5.230
3.12 1.50 .230
5.220
Note: Operator Interfaces comply with ISO 5210.
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO D M G A T E V A L V E S , C L A S S E S 4 0 0 , 6 0 0
(p177)
Parts List Class 400 and 600 (2"- 8" x 6")
Ref. Description Material
1 Handle Ductile Iron
2 Pin Stem Spring Steel
3 Lube Fitting Steel
4 Back Up Ring Chrome Leather
5 Stem Seal As specified (Buna N or Viton)
6 Stem As specified, see page 169
7 Bonnet Class 400: all sizes except
2-1/2" FP, ASTM A395 Ductile Iron
All others, ASTM A216 Carbon Steel
8 Body Stud (4) ASTM A193 Gr B7 Steel
9 Body Stud Nut (4) A194 Gr 2H Stl
10 Bonnet Seal As specified (Buna N or Viton)
11 Body* Class 400: all except weld end and
size 2-1/2" FP, ASTM A395 Ductile Iron
All others, ASTM A216 Carbon Steel
or equivalent
12 Seat As specified, see page 169
13 Gate As specified, see page 169
6" 3" 2"
Screwed End
1
1071 1073 1075 1077 1079
Weld End
2
1091 1093 1095 1097 1099
Grooved End
3
1081 1083 1085 1087 1089
Flanged End
1061 1063 1065 1069
(RF or RTJ)
4
Base Part Numbers, Class 400, Full Port
(985 psi WP1500 psi test)
Parts Detail
2
1
/2" 4"
3" x 2" 4" x 3"
Screwed End LP 3934 3935
Base Part Numbers, Class 400, Regular Port
(1480 psi WP 2225 psi test)
6" 3" 2" 1
1
/2"
Screwed End
1
3938 1072 1074 1076 1078 1080
Weld End
2
1092 1094 1096 1098 1100
Grooved End
3
1082 1084 1086 1088 1090
Flanged End
1062 1064 1066 1068 1070
(RF or RTJ)
4
2
1
/2" 4"
Base Part Numbers, Class 600, Regular Port
8" x 6" 4" x 3" 2"x1
1
/2"
Screwed End LP 3939 3942 3943
Flanged End
3939 3942 3943 3944 3945
(RF or RTJ)
3" x 2" 6" x 4"
* Orders for replacement bodies must include 4 body studs.
1
Screwed End valves furnished for line pipe unless otherwise specified.
TBG and UPTBG 10 round threads on 1-1/2"; UPTBG 8 round on 2" and
2-1/2" valves; TBG 10 round on 3"; TBG 8 round on 4"; LP only on 6".
2
Weld End valves furnished for Sch. 40 pipe. See page 179 for more information.
3
Grooved End valves furnished for Sch. 80 pipe.
4
Raised Face flanges furnished unless otherwise specified.
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO D M G A T E V A L V E S , C L A S S E S 4 0 0 , 6 0 0
How to Order (example: 2" 600, line pipe, std trim: 1072-0422110)
Base Part Number End Connection
Body Stem Gate Seat Seat
Coating*
Config. Material Material Inserts Elastomer
XXXX - X X X X X X X
End Connection Code
LP 0
Screwed TBG 1
UPTBG 2
Weld, Sch. 40 0
Grooved Sch. 80 0
400 RTJ 0
Flanged
400 RF 1
600 RTJ 2
600 RF 3
Screwed 4
Weld 5
Grooved 6
Flanged 7
*On Weld End valves, only
the Bonnet is coated.
See page 179 for coating
descriptions.
Configuration Code
Steel, Nickel Plated 2
Monel 3
Alum. Bronze 4
316 SS 8
Material Code
Duct. Iron
(Steel 4" Bore Only) 1
Monel 3
Alum. Bronze 4
316 SS 8
Material Code
303 SS 2
316 SS 8
Material Code
Uncoated 0
DEMCO 10 1
DEMCO 11 4
DEMCO 12 5
Material Code
Buna N 1
Viton 2
Hypalon 3
Material Code
See previous page.
Dimension
Nom.
Size
Class 400
2" 8
7
/8 7
3
/4 11
1
/2 11
5
/8 8
3
/4 7
3
/4 2 1
5
/8 11 9
1
/2 6
1
/2 8-
5
/8 R23
2
1
/2" 10 13 13
1
/8 10
5
/8 2
1
/2 12
5
/8 7
1
/2 8-
3
/4 R26
3" 10
1
/4 12
1
/2 14 14
1
/8 11
3
/8 8
3
/4 3 2 12
5
/8 11 8
1
/4 8-
3
/4 R31
4" 11
7
/8 15 13
7
/8 11
3
/8 4 3 14
1
/4 12
5
/8
6" 15
1
/2 19
1
/2 19
5
/8 19
1
/4 13
7
/8 6 4 24 14
1
/4 12
1
/2 12-
7
/8 R45
Class 600
1
1
/2" 7
3
/4 7
3
/4 1
5
/8 9
1
/2
2" 8
7
/8 7
3
/4 11
1
/2 11
5
/8 8
3
/4 7
3
/4 2 1
5
/8 11 9
1
/2 6
1
/2 8-
5
/8 R23
2
1
/2" 10 13 13
1
/8 10
5
/8 2
1
/2 12
5
/8 7
1
/2 8-
3
/4 R26
3" 10
1
/4 12
1
/2 14 14
1
/8 11
3
/8 8
3
/4 3 2 12
5
/8 11 8
1
/4 8-
3
/4 R31
4" 11
7
/8 15 17 17
1
/8 13
7
/8 11
3
/8 4 3 14
1
/4 12
5
/8 10
3
/4 8-
7
/8 R37
6" 15
1
/2 22 22
1
/8 19
1
/4 13
7
/8 6 4 24 14
1
/4 14 12-1 R45
8" 26 26
1
/8 19
1
/4 6 24 16
1
/2 12-1
1
/8 R49
Screwed,
Grooved &
Weld-
Full Port
Screwed-
Regular
Port
Flanged-
RTJ
Flanged-
RF
A
Full Port
Regular
Port
Regular
Port
Regular
Port
B (Open)
Full Port
C (Seat Bore)
Full Port
D
Flange
Diameter
Flange
Bolts
(No.,
Size)
Ring
Number
(RTJ)
F
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO D M G A T E V A L V E S , C L A S S E S 9 0 0 , 1 5 0 0
(p179)
Parts List Class 900 (2"- 6") and 1500 (2"- 3")
Ref. Component Material
1 Handle Ductile Iron
2 Pin Stem Spring Steel
4 Back Up Ring Chrome Leather
5 Stem Seal As specified (Buna N or Viton)
7 Bonnet ASTM A487 CL 4N Carbon Steel or
equivalent.
2" valves, AISI 4140 Normalized Steel
8 Body Stud (4) ASTM A193 GR B7 Steel
(6" valve AISI 4140)
9 Body Stud Nut (4) A194 GR 2H Stl*
11 Body** ASTM A487 CL 4N Carbon Steel or
equivalent.
2" screwed and weld end, AISI 1029
Normalized Steel
14 Screw Seal Buna N
15 Relief Fitting Steel
6" 3" 2"
Screwed and
3947 3951 3953 3955
Grooved End
1
Weld End
2
3947 3951 3953 3955 3999
Flanged End
3947 3951 3953 3955 3999
(RF or RTJ)
3
Parts Detail
2
1
/2" 4"
* AISI 4140-4145 6" only.
** Orders for replacement bodies must include 4 body studs.
3" 2"
Screwed and
Grooved End
1
Weld End
2
3948 3952 3957
Flanged End
(RF or RTJ)
3
Base Part Numbers, Class 1500, Full Port (4" see page 172)
2
1
/2"
1
UPTBG 8 round threads on 2" and 2
1
/2" valves; TBG 10 round on 3";
TBG 8 round on 4"; Grooved Ends in Class 900 only.
2
Weld End valves furnished for Sch. 40 and Sch. 80 Class 900; Sch. 40,
Sch. 80 and Sch. 160 Class 1500. See page 179 for more information.
3
Raised Face flanges furnished unless otherwise specified.
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO D M G A T E V A L V E S , C L A S S E S 9 0 0 , 1 5 0 0
End Connection Code
LP 0
Screwed TBG 1
UPTBG 2
Sch. 40 0
Weld Sch. 80 1
Sch. 160 5
Grooved Sch. 80
1
0
900 RTJ 4
Flanged
900 RF 5
1500 RTJ 6
1500 RF 7
Screwed 4
Weld 5
Grooved 6
Flanged 7
descriptions.
1
Class 900 only.
Configuration Code
303 SS 2
316 SS 8
Material Code Uncoated 0
DEMCO 10 1
DEMCO 11 4
DEMCO 12 5
Material Code
Buna N 1
Viton 2
Hypalon 3
Material Code
See previous page.
Dimension
Nom.
Size
Class 900
2" 9 14
1
/2 14
5
/8 9
7
/8 2 14
1
/2 8
1
/2 8-
7
/8 R24
2
1
/2" 9
3
/4 16
1
/2 16
5
/8 11
7
/8 2
1
/2 19 9
5
/8 8-1 R27
3" 11 15 15
1
/8 12
3
/4 3 19 9
1
/2 8-
7
/8 R31
4" 13 18 18
1
/8 15 4 23 11
1
/2 8-1
1
/8 R37
6" 20 24 24
1
/8 19
1
/4 6 24 15 12-1
1
/8 R45
Class 1500
2" 9 14
1
/2 14
5
/8 9
7
/8 2 14
1
/2 8
1
/2 8-
7
/8 R24
2
1
/2" 9
3
/4 16
1
/2 16
5
/8 11
7
/8 2
1
/2 19 9
5
/8 8-1 R27
3" 11 18
1
/2 18
5
/8 12
3
/4 3 19 10
1
/2 8-1
1
/8 R35
Screwed,
Grooved &
Weld-
Full Port
Flanged-
RTJ
Flanged-
RF
A
Full Port Full Port Full Port
B (Open) C (Seat Bore) D
Flange
Diameter
Flange Bolts
(No.,
Size)
Ring
Number
( RTJ)
F
How to Order (example: 2" 900, RTJ, std trim: 3947-4722110)
Coating*
Duct. Iron
Monel 3
Alum. Bronze 4
316 SS 8
Material Code
Monel 3
Alum. Bronze 4
316 SS 8
Material Code
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO D M G A T E V A L V E S , C L A S S 1 5 0 0 , 4 "
(p181)
End Connection Code
Screwed
LP 0
TBG 1
Sch. 40 0
Weld Sch. 80 1
Sch. 160 5
Flanged
1500 RTJ 6
1500 RF 7
Screwed 4
Weld 5
Flanged 7
Configuration Code
Steel 1
Monel 3
Alum. Bronze 4
316 SS 8
Material Code 303 SS 2
316 SS 8
Material Code
Uncoated 0
DEMCO 10 1
DEMCO 11 4
DEMCO 12 5
Material Code
Buna N 1
Viton 2
Hypalon 3
Material Code
Valve Size (in.)
4"
Screwed End
1
Weld End
2
3010
Flanged End
(RF or RTJ)
3
1
TBG 8 round threads on 4".
2
Weld End valves furnished for Sch. 40, Sch. 80 and Sch. 160 Class 1500.
See page 179 for more information.
3
Raised face flanges furnished unless otherwise specified.
Parts Detail
How to Order (example: 4" 1500, RTJ, std trim: 3010-6722110)
Coating*
Monel 3
Alum. Bronze 4
316 SS 8
Material Code
Base Part Number, 4" Class 1500
(3705 psi WP 5575 test)
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO D M G A T E V A L V E S , C L A S S 1 5 0 0 , 4 "
Dimension
Nom.
Size
4" 13 21
1
/2 21
5
/8 21
1
/4 4 23 12
1
/4 8-1
1
/4 R39
Screwed
& Weld-
Full Port
Flanged-
RTJ
Flanged-
RF
A
Full Port
B (Open)
Full Port
C (Seat Bore)
Full Port
D
Flange
Diameter
Flange
Bolts
(No.,
Size)
Ring
Number
(RTJ)
F
Parts List Class 1500 (4")
1 Hub Assembly Steel or Ductile Iron
5 Stem Seal Assy. As specified (Buna N or Viton)
Includes Brz. bushing
and chart
7 Bonnet ASTM A487 CL 4N Carbon Steel
8 Body Stud (4) ASTM A193 Gr B7 Steel
11 Body* ASTM A487 CL 4N Carbon Steel
and chart
and chart
14 Screw Seal Buna N
16 Lock Handle Steel
18 Stem Screw Steel
19 Screw Housing Steel
20 Secondary Seal Buna N
21 Retainer Steel
22 Pin, Lock Handle Steel
23 Bonnet Stud (2) ASTM A193 Gr B7 Steel
24 Bonnet Stud Nut (2) A194 Gr 2H Stl
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
Screwed End
1
1028 1047
Weld End
2
1031 1109 1056 1110
Flanged End
1025 1038
(RTJ)
4
DEMCO D M G A T E V A L V E S , 2 0 0 0 , 3 0 0 0 , 5 0 0 0 W P
(p183)
Valve Size (in)
3" 2"
Screwed End
1
1026 1042 1045 1048
Weld End
2
1029 1115 1051 1054 1057
Grooved End
3
11920 11921 11922 11923
Flanged End
1023 1033 1036 1039
(RTJ)
4
Base Part Numbers, 2000 WP 4000 psi Test
4"
Valve Size (in)
2
1
/2" x 2" 4" x 3" 5" x 4"
Weld End 1114 1113 1111
Base Part Numbers, 3000 WP 6000 psi Test Regular Port
(See ordering information on page 175.)
Valve Size (in)
3" 2"
Screwed End
1
1027 1043 1046 1049
Weld End
2
1030 1052 1055 1058
Flanged End
1024 1034 1037 1040
(RTJ)
4
Base Part Numbers, 3000 WP 6000 psi Test Full Port
2
1
/2" 4"
Valve Size (in)
3" 2"
Base Part Numbers, 5000 WP 10,000 psi Test
1
Screwed End valves furnished for line pipe unless otherwise
specified. UPTBG 8 round on 2" and 2
1
/2" valves; TBG 10
round on 3"; TBG 8 round on 4".
2
Weld End valves furnished for Sch. 40 and Sch. 80 on 2000 WP
valves; Sch. 80 and Sch. 160 on 3000 WP; Sch. 80, XXH and
Sch. 160 on 5000 WP. See page 179 for more information.
3
Grooved End valves furnished for Sch. 80 pipe.
4
RTJ flanges comply with API Std. 6A, 1974.
Parts Detail
2" Full, 2-1/2" Regular
2-1/2" Full 5" Regular
2
1
/2" x 2" 2
1
/2"
2
1
/2" x 2" 4" x 3
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO D M G A T E V A L V E S , 2 0 0 0 , 3 0 0 0 , 5 0 0 0 W P
Screwed 4
Weld 5
Grooved 6
Flanged 7
Configuration Code
303 SS 2
316 SS 8
Material Code
Uncoated 0
DEMCO 10 1
DEMCO 11 4
DEMCO 12 5
Material Code
Buna N 1
Viton 2
Hypalon 3
Material Code
See previous page.
End Connection Code
LP 0
Screwed TBG 1
UPTBG 2
Sch. 80 1
Weld XXH 2
Sch. 160 5
Grooved Sch. 80 0
2000 RTJ 0
Flanged
3000 RTJ 1
5000 RTJ 2
Parts List
2 Hub Assembly Steel or Ductile Iron
4 Lock Handle Steel
6 Stem Screw Steel
7 Stem Screw Seal Buna N
9 Stem As specified, see How to Order
10 Secondary Seal Buna N
11 Retainer Steel
12 Stem Seal Assembly As specified (Buna N or Viton)
13 Lock Screw Steel (2" bore only)
15 Coupling (2" bore only) 2000/3000 WP: A216 WCB Steel
5000 WP: A487 4NSteel
16 Bonnet 2" bore: AISI 1029, or A105 Steel
Other sizes: ASTM A487 Steel
(CL 4N or 2Q)
17 Index Pin Steel (2" bore only)
19 Gate As specified, see How to Order
20 Body* 2" bore: AISI 1029, or A105 Steel
Other sizes: ASTM A487 Steel
(CL 4N or 2Q)
21 Seat As specified, see How to Order
22 Pin, Lock Handle Steel
23 Bonnet Stud ASTM A193, GR B7
(2-1/2" 4" bore)
24 Bonnet Stud Nut (2) A194 Gr 2H Stl
(2-1/2" 4" bore)
25 Body Stud (4) ASTM A193, GR B7
(2-1/2" 4" bore)
(2-1/2" 4" bore)
* Orders for replacement bodies must include 4 body studs
(except 2" bore valves).
How to Order (example: 2" 5000, Line Pipe, std trim: 1028-0422110)
Coating*
Monel 3
Alum. Bronze 4
316 SS 8
Material Code
Duct. Iron
Monel 3
Alum. Bronze 4
316 SS 8
Material Code
Nom.
Size
2000 psi WP, 4000 psi Test
2" 9 11
5
/8 13 2 14 6
1
/2 8-
5
/8 R23
2
1
/2" 9
3
/4 9 16
5
/8 17 13 2
1
/2 2 19 14 7
1
/2 8-
3
/4 R26
3" 11 14
1
/8 18 3 19 8
1
/4 8-
3
/4 R31
4" 13 16
3
/8 21
1
/4 4 23 10
3
/4 8-
7
/8 R37
3000 psi WP, 6000 psi Test
2" 9 11
5
/8 13 2 14 8
1
/2 8-
7
/8 R24
2
1
/2" 9
3
/4 9 16
5
/8 17 13 2
1
/2 2 19 14 9
5
/8 8-1 R27
3" 11 14
1
/8 18 3 19 9
1
/2 8-
7
/8 R31
4" 13 11 16
3
/8 21
1
/4 18 4 3 23 19 11
1
/2 8-1
1
/8 R37
5" 13 21
1
/4 4 23
5000 psi WP, 10,000 psi Test
2" 9 12
1
/8 13 2 14 8
1
/2 8-
7
/8 R24
2
1
/2" 9 13 2 14
3" 11 15
5
/8 18 3 19 10
1
/2 8-1
1
/8 R35
4 11 18 3 19
Screwed,
Grooved &
Weld-
Full Port
Weld
Regular
Port
Flanged-
RTJ
A
Full Port
Regular
Port
Regular
Port
Regular
Port
B (Open)
Full Port
C (Seat Bore)
Full Port
D
Flange
Diameter
Flange
Bolts
(No.-
Size)
Ring
Number
(RTJ)
F
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO D E M C O 4 ", 5 ", 6 " - 5 0 0 0 W P
(p185)
Test Pressure
Test Pressure for 4" x 4" and 5" x 4" 4-bolt design valves is
7500 psi. 12-bolt bonnet design valves are shell tested to 10,000
psi. All 5 casing thread valves shell tested to x2 working
pressure
Nom.
Size
4"
Screwed/
Weld End 13 24
5
/8 4 22
3
/4
4"
Flanged 18 24
5
/8 4 22
3
/4 12
1
/4 8-1
1
/4 R39
5"x 4"
Weld End 13 24
5
/8 4 22
3
/4
(1)

6"x 4"
Weld End 13 24
5
/8 4 22
3
/4
(1)

51000
Casing 16 24
7
/8 5.12 20
Thread
5 3000
4000, 5000
Casing 16 31 5.12 23
Thread
Dimensional Data (inches) Both Bonnet Designs
A
(End to
End)
B
(Open
Height)
C
(Seat
Bore)
D
(Handle
Diameter)
Flange
Diameter
Flange
Bolts
(No.,
Size)
RTJ Ring
Number
F
(1)
Flanged end connection available by special order, consult factory.
4" 5000 psi
(12 bolt bonnet)
4" 5000 WP Full Port
(4 bolt bonnet)
A
D
B
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
4 985, 2000, 3000,
(all 4 are short casing thread)
5 1000, 3000, 4000, 5000
(all 5 are long casing thread)
DEMCO D E M C O 4 ", 5 ", 6 " - 5 0 0 0 W P
Screwed 4
Weld 5
Flanged 7
descriptions.
Configuration Code
303 SS 2
316 SS 8
Material Code
Uncoated 0
DEMCO 10 1
DEMCO 11 4
DEMCO 12 5
Material Code
Buna N 1
Viton 2
Hypalon 3
Material Code
End Connection Code
LP 0
Screwed
TBG 1
Sch. 80 1
Weld
2
XXH 2
Sch. 160 5
Flanged 5000 RTJ
1
2
1
4" x 4" 12 bolt design only, RTJ flanges
comply with API Std 6A, 1974.
2
See page 176 for more information.
Size 4 Bolt 12 Bolt
4"x3" 1110
4"x4" 7420 17263
5"x4" 7421 17264
6"x4" 17265
Steel 1
Monel 3
316 SS 8
Material Code
Parts List Class 5000 (4", 5" x 4", 6" x 4")
2 Handle Assembly Steel or Ductile Iron
3 Tube Clear Acrylic
4 Stem Cap Ductile Iron
5 Key Steel
6 Stem Screw Steel
7 Stem Screw Seal Buna N
9 Stem As specified, see How to Order
10 Secondary seal Buna N
11 Retainer Steel
12 Stem Seal Assembly As specified (Buna N or Viton)
(Includes BRZ Bushing)
13 Bearing (2) Teflon/Phenolic
14 Down Stop Ring 303 SS
16 Bonnet ASTM A487 steel (CL 4N or 2Q)
19 Gate As specified, see How to Order
20 Body* ASTM A487 steel (CL 4N or 2Q)
21 Seat As specified, see How to Order
23 Bonnet Stud (2) ASTM A193, GR B7 Steel
24 Bonnet Stud Nut (2) A194 Gr 2H Steel
25 Body Stud (4) AISI 4140 Steel
25 Body Stud (12) ASTM A193 GR B7
26 Body Stud Nut (4) AISI 4140-4145 Steel
26 Body Stud Nut (12) ASTM A194 GR 2H
How to Order (example: 5" x 4", 4 bolt, weld XXH, std trim: 7421-2522110)
Coating*
Monel 3
Alum. Bronze 4
316 SS 8
Material Code
DM Gate Valves with Casing Threads **
We offer 4 and 5 Full Port
DM Gate Valves with Casing Threads
Size
Pressure Rating (PSIG)
(Full Port)
** 4 design same as pg168 (4 class 400, 985 PSI and
page174 (4 2000 and 4 3000).
5 is a round bonnet design, consult factory for
technical information and data sheet.
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO G E N E R A L T E C H N I C A L I N F O R M A T I O N
(p187)
Standard Weights (pounds)
400
S, G, W* FL*
600
S, G, W* FL*
900
S, G, W* FL*
1500
S, G, W* FL*
2000
S, G, W* FL*
3000
S, G, W* FL*
5000
S, G, W* FL*
1
1
/2" 20
2" x 1
1
/2" 20 40
2" 24 42 26 44 48 100 48 100 48 70 53
100 61
110
2
1
/2" x 2" 48
53
61
2
1
/2" 48 70 50 74 87 170 87 170 74 141 87
170
3" x 2" 32 34 65
3" 58 90 60 96 95 160 113 205 95 131 113
175 140
241
4" x 3" 72 74 145 113
140
4" 93 98 176 140 230 162
320 140 200 162
265 210
330
5" x 4" 162
210
5" 208 317 317

6" x 4" 270 255
6" 300 411 310 428 325
540
8" x 6" 590
Size (in.)
Working Pressure
* S =Screwed End
G=Grooved End
W=Butt Weld End
FL =Flanged End
Weld End only
Grooved End not included
1 Weight shown is for the 4 bolt design, the 12 bolt design is 246lbs
2 Weight shown is for a 5 1000# OMGV with casing threads.
3 Casing thread only (weight will be the same for a 5 4000# valve)
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO
G E N E R A L T E C H N I C A L I N F O R M A T I O N
Valve Size Designations and Weld End
Dimensional Information
1. All references to pipe size in this catalog is the nominal size.
The actual OD and ID for various nominal sizes and schedules
is tabulated below. Weld End bodies are machined at each end
to match the pipe OD and ID.
2. Regular port valve size descriptions are designated by two
numbers. The first number is the nominal size of the end con-
nection. The second number is the ID of the valve seat (dimen-
sion C in the tables).
ID
Sch. 160 Sch. 40
OD
Nominal
Size
1
1
/2" 1.900 1.610 1.500
2" 2.375 2.067 1.939 1.687 1.503
2
1
/2" 2.875 2.469 2.323 2.125 1.771
3" 3.500 3.068 2.900 2.624 2.300
4" 4.500 4.026 3.826 3.438 3.152
5" 5.563 4.813 4.313 4.063
6" 6.625 6.065 5.761 5.187
8" 8.625 7.981 7.625 6.813
Sch. 80 XXH
Special Order Accessories
Square Operating Nuts are offered to replace handles, for
wrench operation. Nuts are sized for 2-inch square sockets.
Locking devices for tamper-proof valve settings of standard
handles are also available.
Special Stem Extensions are available on all gate valves,
for buried service. Extended stems are housed from the valve
bonnet to the handle; operation of the valve is identical to nor-
mal assembly.
Actuators for automated or remote-controlled applications
may be furnished on special order. Prices for pneumatic or
hydraulic actuators can be given on request.
Testing
Demco
Gate Valves are hydrostatically tested at assembly.

Stem seal, body and seat are inspected for zero leakage under
pressure, before acceptance.
Seat Elastomers
Buna N (nitrile) is the basic seat elastomer. It is excellent for
petroleum oil and gases, fuel oils and alcohols from 10 F to
+200 F. Hypalon is optionally offered compounded for maxi-
mum chemical resistance. Particularly suited for oxidizing
acids, it resists hydrocarbon oils and fuels from 10 F to
+250 F. Viton is highly resistant to mineral acids and hydrocar-
bons and resists moderate concentrations of hydrogen sulfide.
Serviceable from 10 F to +400 F. (Not suitable for steam).
Plastic Coatings
Internally plastic-coated body and bonnet are offered with three
coatings. Demco 10 is a catalyst-cured epoxy with excellent
adhesion and resistance to wear, chipping and abrasion, is unaf-
fected by most acids, alkalis, brines and petroleum products up
to 150 F. Demco 11 is a baked-on phenolic serviceable to 200
F and resistant to organic and mineral acids, hydrocarbons and
corrodents encountered in oil and gas production (not recom-
mended for caustics). Demco 12 is a baked-on phenolic-epoxy,
tougher and more abrasion resistant, for excellent service in
caustics and salt water up to 200 F. All coatings are applied 5
to 6 mil thickness.
For applications in high pressure gas above 3000 psi or
involving concentrations of H
2
S or CO
2
consult factory for
recommendations.
Pressure Ratings
Demco
Gate Valves are designed for the maximum working

pressures and test pressures tabulated below:
Gate valve rating must be selected to match the piping system
in which the valve will be installed. Tabulated below are work-
ing pressures at 100 F for ASTM A-106 Grade B pipe in sizes
corresponding to Demco gate valves.
Give size, pressure class and end connection. Specify pressure
class of flanged ends and raised face or RTJ. For threaded ends,
give line pipe, TBG (non upset tubing) or UPTBG (external
upset tubing). For weld or grooved ends, give schedule of
mating pipe.
Class
400
Class
600
Class
900
Class
1500
2000
WP
3000
WP
5000*
WP
990 WP 1480 WP 2220 WP 3705 WP 2000 WP 3000 WP 5000 WP
1500 Test 2225 Test 3350 Test 5575 Test 4000 Test 6000 Test 10,000 Test
Pressure Ratings
* 4"-5000, 5" & 6" regular port-5000 valves of the 4 bolt design are tested at
7,500 psi; exception special order.
Size Sch. 40 Sch. 80 Sch. 160 XXH
1
1
/2" 1340 2430
2" 1210 2220 4300 5970
2
1
/2" 1620 2590 3950 6590
3" 1460 2370 3930 5880
4" 1300 2130 3830 5150
5" 1970 3730 4650
6" 1110 1970 3650
8" 1030 1790 3620
Pressure Ratings
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
DEMCO
D M 7 5 0 0 G A T E V A L V E S
How to Order* (Part number example: Std 5" Butt Weld 24994-2572110)
Base Part End Body Stem Gate
Number Connection* Configuration Material Material
X X X X X X X X X X X 0
Parts Detail
10,000 RTJ 3
Schedule XXH 2
Full Open Butt Weld 6
Steel 2
410 SS 7
17- 4 SS 8
Duplex SS 9
CS/410SS/Buna-N/Buna-N 11
410SS/410SS/Buna-N/Buna-N 12
Wear Ring / Seat Insert
Seat Elastomer/
Other Elastomer
410 SS 7
17- 4 SS 8
Duplex SS 9
Weld 5
Flanged 7
Description 2" 3" 4" 5" 6 5"
DM7500 Butt Weld End 24993 24992 24967 24994 24981
DM 7500 Flanged End 24993 24992 24967 24994 N/A
No. Component Material Description
1 Handwheel Ductile Iron
ASTMA536
Grade 65-45-12
2 Lock Screw Carbon Steel ANSI 1213
3
Skt. Hd.
Alloy Steel ASTMB18.3
Cap Screw
4 Gate Clip Stainless Steel ANSI 302
5 Stem Packing Elastomeric Buna-N
6 Stem Stainless Steel
ANSI 410
HRC 22 Max
7 Bonnet Alloy Steel
ASTMA487
Grade 4 Class C
8 Bonnet Stud Alloy Steel ASTMA193 Grade B7M
9 Bonnet Nut Alloy Steel ASTMA194 Grade 2H
10 Bonnet Seal Elastomeric Buna-N
11 Body Alloy Steel
ASTMA487
Grade 4 Class C
12 Seat Insert
Stainless Steel/
ANSI 410/Buna-N
Elastomeric
13 Gate Alloy Steel ANSI 4130
14 Grease Seal Elastomeric Buna-N
15 Wear Ring Alloy Steel ANSI 4142
16 Wear Ring Seal Elastomeric Buna-N
17
Packing
Bronze ASTMB271 Grade 955
Adapter
18
Stem Screw
Carbon Steel ANSI 1022
Assy.
18* Bearing Steel Roller Thrust
19 Bonnet Cap Carbon Steel ANSI 1022
20 Grease Seal Elastomeric Buna-N
21
Packing
Carbon Steel ANSI 1022
Retainer
22 Hex Cap Screw Alloy Steel ASTMA307 Grade 2
23 Stem Protector Plastic Clear Acrylic
24 Stem Cap Ductile Iron
ASTMA536
Grade 65-45-12
25 Grease Fitting Commercial
26 Grease Vent Commercial
*Consult factory for other end connections or trims.
1
23
24
22
25
3
18
18A
14
19
26
17
4
12
5
13
11
10
6
7
2
21
20
8
9
16
15
SD-016418
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
DEMCO
D M 7 5 0 0 G A T E V A L V E S
Description
2" 3" 4" 5" 6"
Weld Flange Weld Flange Weld Flange Weld Flange Weld Flange
A 9.00 18.38 13.00 24.38 16.00 26.38 17.88 29.00 17.88 N/A
B 13.04 13.04 24.60 24.60 31.00 31.00 31.81 31.81 31.81 N/A
C 2.6 3.94 4.69 5.31 3.90 6.2 5.00 7.03 5.00 N/A
D 6.38 6.38 10.50 10.50 11.75 11.75 14.88 14.88 14.88 N/A
E 13.88 13.88 22.81 22.81 20.00 20.00 26.75 26.75 26.75 N/A
Weight (lb) 76 124 256 372 310* 475* 506 761 506 N/A
Wear Ring I.D., Min (in) 1.97 1.97 2.98 2.98 3.97 3.97 5.17 5.17 5.17 N/A
End Conn. Option 6 ID 2.075 N/A 3.075 N/A 4.075 N/A 5.135 N/A Option
End Conn. Option 6 OD 3.00 N/A 4.40 N/A 5.81 N/A 7.25 N/A Option
*Estimated weights.
D
A
E
E
B
C
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
DEMCO
S E R I E S D T G A T E V A L V E S
How to Order ( XXXXX- XXXXXXX) - Example: 2" Bronze 1500, UPTBG 24753-2488816
Base Part End Body Stem Gate Seat
Seat/Seals
Body/
Number Configuration Configuration Material Material Ring Bonnet
X X X X X X X X X X X X
Threaded 4
Flanged 7
Aluminum
6
Bronze
Stainless
8
Steel
Buna N/Buna N 1
(Peroxide
Cured Buna)
Viton/ Viton 2
P-10/Hytrel 4
P-10/90 Duro
6
Buna-N P.C.
316 SS 8 316 SS 8
316 SS 8
Flanged
600 RTJ 2
600 RF 3
900 RTJ 4
900 RF 5
1500 RTJ 6
1500 RF 7
Threaded
API LP 0
UPTBG 2
Size ANSI Base
(in) Class Part No.
600 17275
1* 900 17276
1500 14044
600 24726
2 900 24727
1500 24753
600 24728
2
1
/2 900 24729
1500 24754
600 24730
3 900 24731
1500 24732
600 24733
4 900 24734
1500 24735
Size/ A A A
B C D E
Class THDD RF RTJ
1600
6.75 10 10 11.0 1.06 5.0 3.0
900/500
2" 600 8.50 11.5 11.63 14.63 2.06 14.50 5.0
2"
8.50 14.5 14.63 14.63 2.06 14.50 5.25
900/1500
2
1
/2" 600 8.75 13.0 13.13 16.71 2.56 14.75 6.13
2
1
/2"
8.75 16.5 16.63 16.71 2.56 14.75 6.38
900/1500
3" 600 14.0 14.13 18.00 3.13 14.75 6.81
3" 900 9.69 15.0 15.13 18.00 3.13 14.75 6.94
3" 1500 18.5 18.63 18.82 3.13 18.00 7.15
4" 600 17.0 17.13 22.25 4.06 23.00 9.00
4" 900 18.0 18.13 22.25 4.06 23.00 9.13
4" 1500 21.5 21.63 22.54 4.06 23.00 9.41
Dimensional Data
D
40
80
130
60
110
10
20
B (OPEN)
E
A
30
120
180
90
100
70
160
21
C
SEE SEAT DETAIL
SEAT SPRING
SEAT SEAL
50 50
SEAT SEAL
P-10
(Seat/seal option 6)
Seat spring and seal
part of seat assembly
Peroxide Cured BUNA or Viton
(Seat/seal option 1 or 2)
Seat seal part of seat assembly
Seat Assembly Detail
* 1 design not shown ( consult factory )
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
DEMCO
S E R I E S D T G A T E V A L V E S
Working Pressure/Test Pressure Data
End Connection Material Class 600 Class 900 Class 1500
Threaded
Bronze
1480 WP 2225 Test 2220 WP 3350 Test 3705 WP 5575 Test
Stainless Steel
Flanged
Bronze 1480 WP 2225 Test 2220 WP 3350 Test 3705 WP 5575 Test
Stainless Steel 1440 WP 2175 Test 2160 WP 3250 Test 3600 WP 5400 Test
BodyAPI LP
(6)
Aluminum Bronze
N/A X N/A X N/A
X
N/A N/A N/A N/A
BodyUPTBG ASTMB148 Alloy 955
CF
BodyANSI RF
(6)
Aluminum Bronze
X X X X X X X X X X
10 1
BodyANSI RTJ ASTMB148 Alloy 955
BodyAPI LP
(8) Stainless Steel CF8M N/A X N/A CF N/A N/A N/A N/A N/A N/A
BodyUPTBG
BodyANSI RF
(8) Stainless Steel CF8M CF X CF CF CF CF CF CF CF CF
BodyANSI RTJ
(6)
Aluminum Bronze
X X X X X X X X X X
20 1 Bonnet
ASTMB148 Alloy 955
(8) Stainless Steel CF8M CF X CF CF CF CF CF CF CF CF
21 1
Stem Bushing
Bronze
( f / SS Bonnet)
30 1
GateElastomer Seat Stainless Steel CF8M
GateP-10 Seat Stainless Steel CF8M, Chromium Plated
40 1 Stem (8) 316 SS
(1) Ring: CF8M; Elastomer: Buna-N Peroxide Cured, 90 Durometer
(2) Ring: CF8M; Elastomer: Viton, 75 Durometer
50 2 Seat Assembly (4)
Ring: CF8M; Insert: Peek; Seal: Hytrel/Elgiloy
Spring: Inconel X-750
(6) Ring: CF8M; Insert: Peek; Seal: Buna-N Peroxide Cured, 90 Durometer
Spring: Inconel X-750
60 1 Handle Ductile Iron ASTMA536 Grade 65-45-12
70 1
Stem Packing
316 SS
Retainer
80 1 Cap Steel
90 1 Stem Seal (1)or(6) Buna-N, Peroxide Cured, 90 Durometer
Assembly
(2) Viton, 90 Durometer
(Matched w/
Seat Option) (4) Teflon/ Elgiloy
100 1 Retainer Snap Ring PH 15-7 Mo
110 4 Cap Screw Alloy Steel
120 1 Lube Fitting Steel
130 1 Relief Fitting Steel
(1)or(6) Buna-N, Peroxide Cured, 90 Durometer
160 1 Body Seal (2) Viton, 90 Durometer
(4) Teflon/Elgiloy
180 1 Handle Seal Buna-N
Body Style and Material Optional Availability*
2" 2
1
/2" 3" 4"
900 900
600 1500 600 1500 600 900 1500 600 900 1500
Index Reqd. Description Material/Option Specifications
* X = Available; CF = Consult Factory; N/A = Not Available. For 1" size, consult factory.
Part number reference for material option is shown in ( ) description column if applicable.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
DEMCO
S E R I E S D B G A T E V A L V E S
How to Order ( XXXXX- X7 8 XXX6 ) Example: 6" x 6" 900 RF 19163-5788896
Base Part End Body Stem Gate Insert
Seat/Seals
Body/Bonnet
Number Connection Configuration Material Material Material Material
X X X X X X 7 8 X X X 6
Aluminum
Bronze
ASTMB148
Alloy 955
(Except 6 x 6 1500)
Aluminum Bronze
4
ASTM B148 Alloy 953
(Except 6 x 6 1500)
316 Stainless Steel
8*
ASTM A351 CF8M
(6 x 6 1500 only)
Duplex Stainless Steel 9*
UN5 831803 (Gate)
UN5 551803 (Insert)
Class 600 all 316 Stainless
Class 1500 6 x 4 Steel
ASTM A479
Class 900 all Type XM-19
Class 1500 6 x 6 Stainless
Steel
Size
Part No.
(in)
Class 600
6 x 4 18993
6 x 6 19108
8 x 6 19977
Class 900
6 x 4 18756
6 x 6 19163
8 x 6 19785
Class 1500
6 x 4 19791
6 x 6 18418
Buna-N 1
Viton 2
Buna-N, 90 Duro
9*
Peroxide Cured
*Most common option.
600 RTJ 2
600 RF 3
900 RTJ 4
900 RF 5
1500 RTJ 6
1500 RF 7
Flanged
6" x 4", 6" x 6", 8" x 6" 600 6" x 4" 900
*Most common option.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
DEMCO
S E R I E S D B G A T E V A L V E S
*See How to Order table for materials not shown (Body, bonnet, seat insert, seat and seals).
Class 600(4); 6 x 4 900(8); 6 x 4 1500 (10); 6 x 6 900/1500 & 8 x 6 900 (12).
Description
Class 600 Class 900 Class 1500
6" x 4" 6"x 6" 8" x 6" 6" x 4" 6" x 6" 8" x 6" 6" x 4" 6" x 6"
Wt. Lbs. 270 400 570 350 540 775 540 610
A
FlangedRF 22 22 26 24 24 29 27
3
/4 27
3
/4
FlangedRTJ 22
1
/8 22
1
/8 26
1
/8 24
1
/8 24
1
/8 29
1
/8 28 28
B (Open) 13
5
/8 19
1
/8 19
1
/8 14
15
/16 34 34 21
5
/16 34
C (Seat Bore) 4 6 6 4 6 6 4 6
D 14
1
/4 24 24 23 20 20 23 24
E 4
3
/16 5
1
/2 5
1
/2 4
3
/8 5
7
/8 5
7
/8 4
11
/16 6
1
/8
(Flange Diameter) 14 14 16
1
/2 15 15 18
1
/2 15
1
/2 15
1
/2
F Flange Bolts (No.-Size) 12-1 12-1 12-1
1
/8 12-1
1
/8 12-1
1
/8 12-1
3
/8 12-1
3
/8 12-1
3
/8
Ring Number (RTJ) R45 R45 R49 R45 R45 R49 R46 R46
Parts List
Ind Req Description/Matl
*
*
*
Class 600 (all), 6" x 4" 900 7 1 Bonnet
*
22 1 Pin, Lock Handle (Steel)
1 1 Handle (Ductile) 8 Body Stud (A193 B7) 23 2 Bonnet Stud (A193 B7)
2 1 Stem Pin (SS) 9 Body Stud Nut (A194 2H) 24 2 Bonnet Stud Nut (A194 2H)
3 1 Lube Fitting (Steel) 10 1 Bonnet Seal
*
6" x 6" 900/1500, 8" x 6" 900
4 1 Back-up Ring (Chrm/Lthr) 11 1 Body
*
15 2 Roller & Cage Assy (Steel)
6" x 4" 1500 12 1 Seat Assembly
*
16 4 Thrust Washer (Steel)
1 1 Hub Assy (Steel or Ductile) 13 1 Gate
*
17 1 Brushing (Monel Type R)
3 1 Lube Fitting (Steel) 14 1 Screw Seal (n/r Class 600) 18 1 Stem Screw (Steel)
6" x 6" 900/1500, 8"x 6" 900 6" x 4" 900 19 1 Housing (Steel)
1 1 Handwheel (Ductile) 15 1 Relief Fitting (Steel) 20 1 Secondary Seal
*
2 1 Set Screw (Steel) 6" x 4" 1500 (next 16-24) 21 1 Retainer (Steel)
3 1 Retainer Screw (Alloy Stl) 16 1 Lock Handle (Steel) 22 4 Housing Screw (Steel)
4 1 Down Stop Ring (316SS) 18 1 Stem Screw (Steel) 23 1 Sight Tube (Clear Acrylic)
Index 5-14 same for all valves 19 1 Screw Housing (Steel) 24 1 Stem Cap (Ductile)
5 1 Stem Seal
*
20 1 Secondary Seal
*
25 1 Lube Fitting (Steel)
6 1 Stem
*
21 1 Retainer (Steel) 26 1 Relief Fitting (Steel)
6" x 4" 1500 6" x 6" 900/1500, 8" x 6" 900
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F L Y VA L V E S
How to Order Example: std wafer carbon steel 3" Class 150 with handle: 03-A5110-02-S02-11/HL
Note: Valves with optional materials of construction are available on
application.
1
Controlled hardness carbon steel (H
2
S Service).
2
Valves equipped with 316 SS stems may require derating depending
on size and class. See page 191 for actual valve ratings.
3
Standard seat for Class 600 valves.
4
SS packing adjustment studs and nuts are standard.
*Carbon steel discs (14" and largerconsult factory).
5
Ref. inconel.
6
Ref. monel.
7
Ref. Stellite overlay
Size Body Trim Seal Packing
Actuation
Inches Group Group Group Group
4
3" 03
4" 04
6" 06
8" 08
10" 10
12" 12
14" 14
16" 16
18" 18
20" 20
24" 24
CS Disc*
01
17- 4 Stem
SS Disc
02
17-4 Stem
SS Disc
Ni-Cr
5
03
Stem
Ni-Cu
6
Disc & 04
Stem
SS Disc
316 SS 05
Stem
2
SS Disc
HF-6 O/L
7
06
17-4 Stem
SS Disc
HF-6 O/L
7
07
Ni-Cr Stem
5
TFE VEE 11
High Temp
13
Graphitized
Grafoil 14
Bare Stem 00
Handle HL
Handwheel
WG
Worm Gear
Chainwheel
CH
Worm Gear
Class Material Style
1=150 1=CS 0=Wafer
3=300 2=SS 1=Lug
6=600 3=CS2
1
4 =CS/ENC
5=LCC
TFE S01
RTFE S02
SS/ RTFE
3
F02
3
NI-Cr
5
Alloy
(UNS No. F03
6625) / RTFE
316 SS M01
Ni-Cr
5
Alloy
(UNS No. M03
6625)
X X A5 X X X X X X X X X X X X
/
DynaCentric valves comply with the following design and testing
standards: ANSI B16.5 (Steel Pipe Flanges and Flange Fittings);
ANSI B16.34 (Steel Valves); ANSI/ FCI 70-2 (Control Valve
Seat Leakage); MSS-SP-6 (Standard Finishes for Pipe Flanges);
MSS-SP-25 (Standard Marking System for Valves); MSS-SP-55
(Quality Standard for Steel Castings); MSS-SP-68, API 609
(Butterfly Valves).
In addition, DynaCentric valves can be supplied to comply
with these standards: ANSI B31.1 (Power Piping); ANSI B31.3
(Chemical Plant and Petroleum Refinery Piping); MSS-SP-61
(Pressure Testing of Steel Valves); and API 598 (Valve
Inspection and Testing); and API 607, fire-test specifications.
DynaCentric valves trimmed for sour gas service in accordance
with NACE MR-01-75 (latest issue) are available from W-K-M
in both carbon steel and alloy construction.
Standards and Compliance
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
D Y N A C E N T R I C H I G H P E R F O R M A N C E B U T T E R F L Y VA L V E S
High Temperature
DynaCentric valves for high temperature service are equipped
with a modified 316 stainless steel seat and insert (M01), and
316 stainless steel stem bushings with high temperature seals.
This seat/seal combination is rated up to 800F in carbon steel
bodies. Ni-Cr Alloy (UNS No. 6625) seats (M03) and stainless
steel bodies can be utilized up to 1000F. Leakage rates for
metal seated valves are within the service limits of ANSI/FCI
70-2 Class V (See page 198 for details). DynaCentric valves
furnished with this seat perform well in steam, hot oil and heat
transfer fluids. Valves for higher temperatures can also be
provided on request.
Vacuum Service
The drop-tight sealing capabilities of DynaCentric valves
make them an excellent selection for vacuum service. S01,
S02, and F02 seat-seal codes are suitable for vacuum service
to 20 microns absolute. Inverted packing or purged stuffing
box configuration is available on request.
Sour Oil and Gas Service
DynaCentric valves with sour gas trims are available for H
2
S
service in accordance with NACE MR-0l-75, latest issue.
(For recommendations on specific material codes for sour oil
and gas service, please reference Bulletin HS.)
Low Temperature Service
DynaCentric valves for temperatures to 50F are available
in both 316 stainless steel construction and low temperature
carbon steel. Low temperature seat/seal code recommendations
appear on page 190.
Oxygen Service
DynaCentric valves provide the positive shut-off and tight
sealing necessary for gaseous oxygen service. Another design
advantage making the DynaCentric butterfly valve a good
choice for oxygen service is positive grounding. Each valve
includes Belleville springs between the body and lower stem,
which positively grounds the disc and eliminates the possibility
of static buildup, a potential cause for explosion or fire.
Additional safeguards have been established to ensure valves
for oxygen service meet the strict requirement of being com-
pletely free of oil, grease, combustible material, slag, metal
shavings, paint, rust or various fibers. All parts are cleaned in
solvent, washed in hot soapy water, thoroughly dried and care-
fully inspected for contamination. After assembly and testing,
each valve is individually tagged and sealed in a polyethylene
bag. Valves for such service may be supplied in any materials,
but 316 stainless steel or Ni-Cu Alloy (UNS No. 5500) are
recommended.
Steam Service
DynaCentric valves are ideally suited for applications in service
steam. Reinforced TFE seats (S02) with high temperature pack-
ing will handle steam to 100 psig saturation pressure. When fit-
ted with 316 stainless steel seats with reinforced TFE inserts
(F02), the DynaCentric valve is suitable for steam to 250 psig
saturation pressures. The combination of rotary operation,
streamlined flow and positive shut-off can result in years of
maintenance-free service without the seizures on cool-down,
flashing or stem leakage associated with conventional gate or
globe valves.
Safety & Trim Guidelines
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
3"12" Class 150, 3"10" Class 300, 3" 8" Class 600 DynaCentric Valves
(Wafer style shown,
lug style available)
Group Item Carbon Steel Stainless Steel
Carbon Steel
(H
2
S)
1. Body A516 Gr 70 A351 Gr CF8M A516 Gr 70
2. Seat Retainer A516 Gr 70 A276 Type 316 A516 Gr 70
3. Seat Retainer Screw A193 Gr B7 18-8 SS
4. Stem/Disc Spring 18-8 SS
5. Stop Pin 316 SS
BODY
6. Stop Pin Plug Carbon Steel 316 SS
7. Stem Bearing TFE/Steel Teflon/316 SS
8. Nameplate 18-8 SS
9. Gland Retainer Carbon Steel Stainless Steel Carbon Steel
10. Gland Retainer Stud 18-8 SS
11. Gland Retainer Nut 18-8 SS
12. Body Gasket See Note (2)
13. Disc A351 Gr CF8M
14. Stem
A564 Type 630,
H1150 +H1150
15. Stem Pins
A564 Type 630,
H1150 +H1150
16, 17. Disc Spacer, Bearing
(4)
316 SS
18. Stem Key* Carbon Steel
19. Stem Retainer Pins 316 SS
20. Packing Spacer 316 SS
21. Gland Ring 316 SS
SEAL 22. Seat See Note (1)
PACKING 23. Packing Set See Note (3)
Standard Materials of Construction
TRIM
Note (1): Seat assemblies consist of the following:
TYPE S Class 150Virgin TFE (available in Class 150 only)
Standard Class 150 and 300Reinforced TFE
TYPE F Metal, Fire-Tested,
Class 150, 300 and 600Stainless Steel with
Reinforced TFE Insert
TYPE MMetal, High Temperature
Class 150, 300 and 600316 Stainless Steel with
316 Stainless Steel Insert
Note (2): Standard valves do not require body gaskets. FO2, fire tested
and high temperature, MO1/MO3, valves are equipped with
composite fiber body gaskets.
Note (3): Packing sets consist of the following:
TFE VEE
High temperature, graphitized
Grafoil
Note (4): 1996 combined as one part
*Stem key for 8" valves and larger.
Hard Chrome Plated on FO2, MO1 and MO3 only.
11
9
10
23
7
4
8
14
19
16
17
18
21
20
15
5
6
1
13
22
12
2
3
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
W-K-M
14"24" Class 150, 12"24" Class 300, 10" 12" Class 600 DynaCentric Valves
(Lug style shown,
wafer style available)
Group Item Carbon Steel Stainless Steel
Carbon Steel
(H
2
S)
1. Body A216 Gr WCC A351 Gr CF8M A216 Gr WCC RC-22
2. Seat Retainer A516 Gr 70 A276 Type 316 A516 Gr 70 RC-22
3. Seat Retainer Screw A193 Gr B7 18-8 SS
4. Stem/Disc Spring 18-8 SS
5. Stop Pin 316 SS
BODY
6. Stem Bearing Teflon/Steel Teflon/316 SS
7. Nameplate 18-8 SS
8. Gland Retainer Carbon Steel Stainless Steel Carbon Steel
9. Gland Retainer Stud 18-8 SS
10. Gland Retainer Nut 18-8 SS
11. Bottom Cover Plate Carbon Steel Stainless Steel Carbon Steel RC-22
12. Bottom Cover Gasket Composite Fiber
13. Bottom Cover Bolt A193 Gr B7 18-8 SS A193 Gr B7
14. Body Gasket See Note (2)
15. Disc A216 Gr WCC
A351 Gr CF8M
16. Stem
A564 Type 630,
H1150 +H1150
17. Stem Pins
A564 Type 630,
H1150 +H1150
18/19. Disc Spacer/Bearing
(4)
316 SS
20. Stem Key Carbon Steel
21. Stem Retainer Pins 316 SS
22. Packing Spacer 316 SS
23. Gland Ring 316 SS
SEAL 24. Seat See Note (1)
PACKING 25. Packing Set See Note (3)
Standard Materials of Construction
TRIM
Note (1): Seat assemblies consist of the following:
TYPE S Class 150Virgin TFE (available in Class 150 only)
Standard Class 150 and 300 Reinforced TFE
TYPE F Metal, Fire-Tested,
Class 150, 300 and 600Stainless Steel with
Reinforced TFE Insert
TYPE MMetal, High Temperature
Class 150, 300 and 600316 Stainless Steel with
316 Stainless Steel Insert
Note (2): Standard valves do not require body gaskets. FO2 fire tested,
fire safe and high temperature, MO1/MO3 valves are equipped
with composite fiber body gaskets.
Note (3): Packing sets consist of the following:
TFE VEE
High temperature, graphitized
Grafoil
Note (4): 1996 combined as one part
Hard Chrome Plated on FO2, MO1 and MO3.
Electroless Nickel Plated.

10
9
25
6
7
1
6
4
12
11
24
14
2
3
8
23
22
20
17
16
21
18
19
16 17
13
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Material Codes
This chart is an abbreviated guide to the chemical resistance
and pressure-temperature limitations of seat-seal materials used
in DynaCentric valves. Complete ratings curves are shown
below. For additional information, please consult your
DynaCentric representative or the factory.
Pressure-Temperature Limitations
Seat ratings are based on differential pressures with the disc in
the fully closed position and refer to seat only. Body pressure/
temperature ratings appear on page 191.
Seat-Seal Material Codes and Ratings
Service Application
Seal
Code
Seat
Material
ANSI /FCI 70-2
Shutoff Class
S01 TFE 6 (VI) Seats are virgin TFE. Use where lading contamination from glass
or other fillers is not desirable, such as in food service. Available in
Class 150 valves only. Temperature range is 50F to +400F. Drop tight.
S02 RTFE 6 (VI) Seat material is TFE reinforced with inert materials for use at elevated
temperatures and pressures. Same chemical resistance as virgin TFE
except slightly affected by hot alkaline solutions. Suitable for saturated
steam to 100 psig. Temperature range is 50F to +500F. Drop tight.
F02 SS/RTFE 6 (VI) Seat consists of stainless steel rings with a reinforced TFE insert.
Recommended trim for fire-test applications and for steam service to
250 PSI saturation. Temperature is 50F to +500F. Drop tight.
F03 Ni-Cr Alloy 6 (VI) Seat consists of Ni-Cr Alloy (UNS No. 6625) with a reinforced TFE insert.
(UNS No. 6625) / Recommended trim for fire-tested applications and for steam service
RTFE to 250 psi saturations. Temperature range is 50F to +500F. Drop tight.
M01 316 SS * Recommended trim for saturated stem above 250 PSI, hot oils and
gases, and temperatures to 750F. Pressure/temperature range is same
as body rating. Meets ANSI/FCI 70-2.
M03 Ni-Cr Alloy * Same as M01 but for temperatures from 750F to 1000F.
(UNS No. 6625)
*Standard leakage rate of metal seated valves is less than .005 ml/PSI/NPS. Class V Shut-off can be furnished on request.
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Ratings shown above are maximum working pressure ratings for
the valve body at various temperatures. All pressures are PSIG.
Practical pressure limitations according to actual service conditions
are determined by the seat ratings shown on page 190.
These valve body ratings are based on the following material
specifications: CS-ASTM A516 Grade 70 and A216 Grade WCC
(NOTE: Carbon steel listed is not recommended for prolonged
usage above 800F.) 316 SS-ASTM A351 Grade CF8M.
Valves with 17-4 PH stems are only recommended up to a
maximum temperature of 750F. Ni-Cr Alloy (UNS No. 6625)
stems are required for temperatures above 750.
NOTE: Cold working pressures for the DynaCentric valves
equipped with 316 SS stems will be derated. See table above.
Ni-Cr Alloy (UNS No. 6625) or Ni-Cu Alloy (UNS No. 5500)
stems can be furnished for applications requiring high corrosion
resistance and full ANSI ratings.
Valve Body Pressure Ratings
P Max.316 SS Stems
Size (in)
Class 150 Class 300 Class 600
3 285 650 650
4 285 325 650
6 285 325 650
8 285 325 650
10 125 325 650
12 125 325 650
14 125 325
16 125 325
18 125 325
20 125 325
24 125 325
Maximum Shut-Off Pressures for DynaCentric Valves
with 316 Stainless Steel Stems (CWP)
Temp Class 150 Class 300 Class 600
F CS 316 SS CS 316 SS CS 316 SS
-20 to
285 275 740 720 1480 1440
100
200 260 240 675 620 1350 1240
300 230 235 655 560 1315 1120
400 200 195 635 515 1270 1025
500 170 170 600 480 1200 955
600 140 140 550 450 1095 900
650 125 125 535 445 1075 890
700 110 110 535 430 1065 870
750 95 95 505 425 1010 855
800 80 80 410 420 845
850 65 420 835
900 50 415 830
950 35 385 775
1000 20 350 700
Pressure/Temperature Ratings for DynaCentric
Valve Bodies with Standard Stems
Stem Material: A564 Type 630, H1150.
In accordance with ANSI B16.34.
Stem Material: ASTM A276 Type316; Cond. A.
30,000 Minimum Yield
75,000 Minimum Tensile
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
Proper valve selection is dependent on several factors for both
liquid and gas flow, as well as the physical limitations of the
valve as established by the manufacturer. The following infor-
mation is presented for handy and quick reference.
The flow coefficient (CV) is the most universally accepted
measure of a valves capacity to handle flow. A dimensionless
arrangement is often employed with DynaCentric valves where
the desired C
V
for the control valve results in a valve size that is
smaller than the line size.
Use the following equation to obtain the corrected flow
coefficients for the DynaCentric valve when installed in combi-
nation with reducers.
C
VR
= C
V
R
C
V
d
2
) (
2
d
2
D
2 ) (
2
1 1.5
1
+
890
1
R =
entity, CV is defined as the number of gallons per minute of
water at standard conditions (60F and 14.7 psia) which will
flow through a given flow restriction with a pressure drop of
1 psi. Once determined, the CV of a valve provides a capacity
index by which one is able to readily estimate the required size
of a flow restriction for controlling the fluid flow of any system.
Cavitation
DynaCentric valves, because of their inherently high flow
capacities, have a greater tendency to cavitate at high pressure
drops. Cavitation occurs in liquids if the static pressure of the
flowing liquid decreases to a value less than the fluid under
pressure. This phenomenon can create accelerated wear and
deterioration of valves and piping as well as annoying noise and
vibration problems. To avoid cavitation in piping, the following
formula should be employed:
Pmax = 0.33 (P
1
P
V
).
This formula can also be safely used where reducers are
employed.
Reducers
When valves are mounted between pipe reducers, a loss in
valve capacity occurs with an additional pressure drop across
the system due to contractions and sudden enlargements. This
S
G
P
C
V
= Q
L
P
S
G
Q
L
= C
V
Q
L
C
V
P = S
G
) (
2
S
G
T
R
P x P
1
C
V
=
P x P
1
S
G
T
R
Q
G
= 1360 C
V
Q
G
1360 C
V
S
G
T
R
P
1
Q
G
1360
P =
) (
2
For liquid service:
For gas service:
For steam service (saturated):
For steam service (superheated):
These formulas are generally
accurate for gas flows where
P
<
.1P
1
.
For P > .1P
1
, consult factory
for assistance in sizing.
2.1 P(P
1
+ P
2
)
C
V
=
W
W = 2.1C
V
P(P
1
+ P
2
)
2.1 P(P
1
+ P
2
)
C
V
=
W(1 + 0.0007 T
S
)
(1 + 0.0007 T
S
)
W = 2.1C
V
P(P
1
+ P
2
)
Where:
C
v
= valve flow coefficient
P
1
= upstream pressure, psia
P
2
= downstream pressure, psia
P = pressure drop P
1
P
2
, psi
Q
G
= gas flow rate, SCFH
Q
L
= liquid flow rate, U.S. gpm
S
G
= specific gravity of fluid
T
R
= temperature, R (460 + F)
T
S
= steam superheat, F
W = flow rate, lbs/ hr
P
v
= vapor pressure, psia
Where:
C
V
= sizing coefficient determined by standard
calculations
d = nominal valve size, inches
D = line size, inches
C
VR
= corrected flow coefficient for valve between
reducers
Valve Sizing Formulas
CONTENTS MENU
CONTACT
www:
PRINT
TECHNICAL DATA
CONTACT
HELP
The practical control range of this type of valve occurs where
continuous throttling can be effected without significant loss of
accuracy or decrease in valve life.
The usable rangeability for DynaCentric valves is between
20 and 70 opening, resulting in a ratio of 10:1. In sizing the
DynaCentric valve for throttling applications, a full open C
V
should be selected that is approximately 1.8 times the C
V
deter-
mined from calculations. Under normal flow conditions, this
selection will provide a valve opening of 50-60.
C
V
values equal the flow of water in U.S. gallons per minute
per 1 PSI pressure drop.
V
)
Typical Characteristic Curve
Disc Angle, Degrees Open
Valve
Size
20 30 40 50 60 70 80 90
3 14 31 54 81 115 144 169 180
4 31 66 117 176 250 312 367 400
6 85 180 317 476 677 846 995 1058
8 174 371 654 981 1395 1744 2049 2180
10 300 638 1125 1688 2401 3001 3526 3751
12 440 936 1651 2477 3523 4403 5174 5504
14 523 1110 1959 2939 4180 5225 6139 6531
16 659 1401 2473 3709 5276 6594 7748 8243
18 886 1883 3323 4985 7089 8862 10412 11077
20 1066 2266 3998 5998 8530 10662 12528 13328
24 1554 3302 5828 8741 12432 15540 18260 19425
Series A5100, Class 150
Valve
Size
20 30 40 50 60 70 80 90
3 14 31 54 81 115 144 169 180
4 31 66 117 176 250 312 367 400
6 85 180 317 476 677 846 995 1058
8 174 371 654 981 1395 1744 2049 2180
10 268 570 1005 1508 2145 2681 3150 3351
12 399 849 1498 2247 3196 3995 4693 4993
14 428 910 1606 2409 3426 4282 5032 5353
16 609 1295 2285 3428 4876 6094 7161 7618
18 848 1730 2983 4504 6303 7594 8379 8855
24 1290 2629 4534 6847 9580 11542 12738 15520
Valve
Size
20 30 40 50 60 70 80 90
3 14 31 54 81 115 144 169 180
4 23 50 88 132 188 234 275 293
6 67 141 249 374 532 665 781 831
8 155 330 583 874 1243 1554 1826 1942
10 241 512 904 1356 1929 2411 2833 3014
12 336 714 1260 1890 2688 3360 3948 4200
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
0-50psi 155 348 728 1125 2154 3291 4277 6334 8129 11655 15770
100psi 200 419 911 1364 2563 4013 5380 7947 10131 14371 19714
200psi 291 561 1276 1841 3381 5458 7586 11174 14134 19743 27803
285psi 368 681 1587 2247 4077 6686 9462 13917 17536 24309 34308
300psi 381 702 1642 2319 4200 6903 9793 14401 18137 25114 35491
400psi 472 844 2007 2796 5018 8348 11999 17628 22140 30486 43379
500psi 563 986 2373 3274 5836 9793 14205 20855 26143 35858 51268
600psi 653 1128 2738 3751 6654 11237 16411 24082 30146 41230 59156
700psi 744 1289 3104 4229 7473 12582 18618 27309 34149 46601 67045
740psi 780 1326 3250 4420 7800 13260 19500 28800 35750 48750 70200
0-50psi 155 348 728 1125 2154 3291 4277 6334 8129 11655 15770
100psi 190 395 660 1290 2430 3790 5050 7459 9533 13556 18540
200psi 250 490 1110 1800 2990 4790 6610 9740 12340 17297 24080
285psi 300 570 1330 1900 3460 5640 7930 11670 14726 20477 28790
300psi 315 590 1370 1950 3550 5790 8180 12010 15147 21038 29620
400psi 380 680 1630 2280 4100 6800 9720 14281 17955 24780 35160
500psi 445 780 1880 2610 4660 7800 11270 16551 20762 28821 40700
600psi 610 875 2140 2940 5220 8800 12820 18821 23570 32262 46240
700psi 575 970 2400 3270 5780 9800 14380 21092 26377 36003 51780
740psi 600 1020 2500 3400 6000 10200 15000 22000 27500 37500 54000
DEMCO
The Torque Values shown in these tables are net required operating torques for actuator sizing.
An appropriate safety factor is included for normal wet operating torque.
For severe service, additional safety factor should be added:
Dry gas or slurry................................1.25 Low Temperature.................................... 1.20
Emergency Shutdown...................... 1.60
3 4 6 8 10 12 14 16 18 20 24
SO seats upstream - Valve torque (in.lb.)
3 4 6 8 10 12 14 16 18 20 24
SO seats upstream - Valve torque (in.lb.)
(p203)
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
0-50psi 333 609 1389 2710 4422 6547 7728 9709 13116 18395 25623
100psi 383 733 1665 3211 5328 8051 9314 11660 15035 22135 30942
200psi 482 979 2218 4212 7134 11059 12485 15562 22023 29616 41579
285psi 567 1188 2687 5063 8672 13615 15181 18880 27070 35974 50621
300psi 582 1225 2770 5214 8943 14066 15856 19455 27961 37096 52216
400psi 682 1471 3322 6216 10751 17074 18828 23387 33899 44577 52854
500psi 781 1717 3875 7216 12560 20082 21999 27270 39837 52057 73491
600psi 881 1963 4427 8218 14358 23089 25171 31172 45775 59538 84129
700psi 981 2209 4979 9219 16177 26097 28342 35075 51713 67018 94765
740psi 1021 2308 5200 9620 16900 27300 29611 36638 54088 70011 98021
800psi 1080 2455 5531 10221 17985 29105
900psi 1180 2701 6084 11222 19794 32112
1000psi 1280 2947 6636 12224 21802 35120
1100psi 1379 3193 7188 13225 23410 38127
1200psi 1479 3440 7741 14227 25219 41135
1300psi 1579 3686 8293 15228 27027 44143
1400psi 1678 3932 8845 16230 28836 47150
1480psi 1758 4129 9287 17031 30283 49557
3 4 6 8 10 12 14 16 18 20 24
0-50psi 333 609 1389 2710 4422 6547 7728 9709 13116 18395 25623
100psi 366 694 1578 3035 5043 7595 8956 11218 15432 21289 29746
200psi 431 863 1957 3729 6286 9689 11412 14235 20063 27079 37991
285psi 487 1006 2278 4307 7343 11470 13500 16800 24000 32000 45000
300psi 497 1032 2335 4409 7530 11784 13868 17253 24695 32868 46237
400psi 562 1201 2714 5089 8774 13878 16325 20270 29326 38658 54482
500psi 528 1370 3092 5789 10016 15973 18781 23288 33958 44447 62728
600psi 693 1539 3470 5448 11259 18068 21237 26305 38589 50237 70974
700psi 759 1707 3849 7128 12503 20162 23693 29323 43221 56026 79219
740psi 785 1775 4000 7400 13000 21000 24675 30530 48074 58342 82515
800psi 824 1876 4227 7808 13746 22257
900psi 890 2045 4605 8488 14989 24351
1000psi 955 2214 4954 9167 16232 28446
1100psi 1021 2383 5382 9847 17476 28541
1200psi 1086 2552 5741 10527 18719 30635
1300psi 1152 2721 6119 11206 19962 32730
1400psi 1218 2890 8497 11888 21205 34824
1480psi 1270 3025 8800 12430 22200 36500
The Torque Values shown in these tables are net required operating torques for actuator sizing.
An appropriate safety factor is included for normal wet operating torque.
For severe service, additional safety factor should be added:
Dry gas or slurry................................1.25 Low Temperature.................................... 1.20
Emergency Shutdown...................... 1.60 High Temperature (600
0
- 700
0
F)............ 1.30
Extended High Temp. (750
0
- 1000
0
F)..... 1.50
3 4 6 8 10 12 14 16 18 20 24
FO/MO seats upstream - Valve torque (in.lb.)
FO/MO seats downstream - Valve torque (in.lb.)
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
Dimensional Data
A B C D E F G H J K L M N P Q
Valve
Size
3 5
3
/8 1
15
/16 5
1
/2 7
5
/8 11
5
/8 6 2 4
7
/16
7
/8
3
/8-16 2
5
/8
4 6
5
/8 2
2
/32 6
3
/8 8
1
/2 13
1
/8
41
/64 2 7
1
/2 2 4
7
/16
7
/8
3
/8-16 3
5
/8
6 8
3
/4 2
23
/64 7
5
/8 9
3
/4 15
3
/4
49
/64 2 9
1
/2 2 4
7
/16
7
/8
3
/8-16 5
5
/8
8 11 2
17
/32 8
7
/8 11
9
/16 18
11
/16
49
/64 2 11
3
/4 2
1
/8 4
1
/4
5
/8 1
1
/4
3
/8-16 7
5
/8 1
9
/16
10 13
1
/4 2
25
/32 9
7
/8 12
5
/8 20
3
/4
57
/64 2 14
1
/4 2
1
/8 4
1
/4
5
/8 1
1
/4
3
/8-16 9
1
/2 1
9
/16
12 15
3
/4 3
15
/32 11
1
/4 14
13
/16 24
3
/4
57
/64 2 17 2
3
/4 5
1
/2
13
/16 1
5
/8
1
/2-13 11
1
/2 2
R S T U V W X AA EE FF GG HH
Weight-Lbs Weight-Lbs
Lug Body Wafer Body
Valve
Size
3
5
/8
7
/16 7
1
/2
5
/8-11 4 6
3
/8 2
1
/4 3
13
/32
11
/32 20 16
4
5
/8
7
/16 9
5
/8-11 8 7
1
/4 2
1
/4 3
13
/32
11
/32 35 25
6
7
/8
5
/8 11
3
/4-10 8 8
1
/2 2
1
/4 3
13
/32
11
/32 55 35
8
1
/4 Sq. 1
1
/8 13
1
/2
3
/4-10 8 10 3
1
/2
9
/16 83 57
10
1
/4 Sq. 1
1
/8 16
7
/8-9 12 11 3
1
/2
9
/16 125 90
12
5
/16 Sq. 1
3
/8 18
3
/4
7
/8-9 12 12
3
/4 3
1
/2 5
5
/16
13
/16
9
/16 175 150
Series A5100, Class 150, 285 PSI CWP* (inches)
*Pressure ratings are in accordance with ANSI B16.34 for group 1.1
carbon steel valves.
Pressure ratings will vary with different body materials.
Valve
Size
14 17 3
21
/32 10
3
/4 15
9
/16 26
13
/16 1
1
/64 4 18
3
/4 3
7
/16 6
7
/8
7
/8 1
3
/4
1
/2-13 12
15
/32 2
16 19
1
/4 4
9
/64 12
9
/32 17
13
/16 30
5
/8 1
1
/64 4 21
1
/4 3
7
/16 6
7
/8
7
/8 1
3
/4
1
/2-13 14
19
/64 2
3
/4
18 21
1
/2 4
1
/2 14
1
/2 20
13
/16 35
1
/16 1
9
/64 4 22
3
/4 4
3
/4 9
1
/2 1 2 16
17
/64 3
20 23
5
/8 5 15
13
/16 22
7
/16 38
3
/32 1
9
/64 4 25 4
3
/4 9
1
/2 1 2 18
5
/64 3
24 28
1
/8 6
1
/16 17
3
/4 24
3
/4 42
13
/16 1
17
/64 4 29
1
/2 4
3
/4 9
1
/2 1 2 21
7
/16 3
3
/4
Lug Body Wafer Body
Valve
Size
14
5
/16 Sq. 1
3
/8 20
1
/2 1-8 12 13
1
/2 3
1
/2 4
25
/32
13
/16
9
/16 230 170
16
3
/8 Sq. 1
3
/4 23
1
/2 1-8 16 15
1
/32 4
1
/16 5
5
/16
11
/16
13
/16 360 270
18
1
/2 Sq. 2 24
3
/4
11
/16 1
1
/8-8 16 17
1
/2 4
25
/32 2
7
/8 x 6
15
/16
15
/16
13
/16 455 330
20
1
/2 Sq. 2 27
1
/4
11
/16 1
1
/8-8 20 18
13
/16 4
25
/32 2
7
/8 x 6
15
/16
15
/16
13
/16 570 390
24
5
/8 Sq. 2
1
/2 32
11
/16 1
1
/4-8 20 20
3
/4 4
25
/32 2
7
/8 x 6
15
/16
15
/16
13
/16 890 640
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
Dimensional Data
Valve
Size
3 5
3
/8 1
15
/16 5
1
/2 7
5
/8 11
5
/8
49
/64 2 6
5
/8 2 4
7
/16
7
/8
3
/8-16 2
5
/8
4 6
5
/8 2
3
/32 6
3
/8 8
1
/2 13
1
/8
49
/64 2 7
7
/8 2 4
7
/16
7
/8
3
/8-16 3
5
/8
6 8
3
/4 2
23
/64 7
5
/8 9
3
/4 15
3
/4
49
/64 2 10
5
/8 2 4
7
/16
7
/8
3
/8-16 5
5
/8
8 11 2
25
/32 8
7
/8 11
9
/16 18
11
/16
57
/64 2 13 2
1
/8 4
1
/4
5
/8 1
1
/4
3
/8-16 7
5
/8 1
9
/16
10 13
1
/4 3
1
/32 10
7
/8 14
7
/16 24 1
1
/16 4 15
1
/4 2
3
/4 5
1
/2
13
/16 1
5
/8
1
/2-13 9
1
/2 2
12 15
3
/4 3
15
/32 12
1
/4 16
1
/2 27
31
/64 1
9
/64 4 17
3
/4 2
3
/4 5
1
/2
13
/16 1
5
/8
1
/2-13 11
1
/2 2
3
/4
Lug Body Wafer Body
Valve
Size
3
5
/8
7
/16 8
1
/4
3
/4-10 8 6
3
/8 2
1
/4 3
13
/32
11
/32 25 16
4
5
/8
7
/16 9
3
/4
3
/4-10 8 7
1
/4 2
1
/4 3
13
/32
11
/32 38 25
6
7
/8
5
/8 12
1
/4
3
/4-10 12 8
1
/2 2
1
/4 3
13
/32
11
/32 67 35
8
1
/4 Sq. 1
1
/8 14
3
/4
7
/8-9 12 10 3
1
/2
9
/16 115 61
10
5
/16 Sq. 1
3
/8 17
1
/4 1-8 16 12
3
/8 3
1
/2 5
5
/16
11
/16
9
/16 145 110
12
3
/8 Sq. 1
3
/4 20 1
1
/8-8 16 13
3
/4 3
1
/2 5
5
/16
11
/16
9
/16 225 170
Valve
Size
14 17
1
/2 4
5
/8 13
5
/8 20 33 1
1
/8-8 1.25 4 20
1
/4 4
3
/4 9
1
/2 1 2 12
15
/32 3
16 19
1
/4 5
9
/32 14
5
/8 21 35
7
/32 1
1
/4-8 1.50 4 22
1
/2 4
3
/4 9
1
/2 1 2 14
5
/16 3
18 22 5
13
/16 16
5
/32 23
5
/32 38
37
/64 1
1
/4-8 1.56 4 24
3
/4 4
3
/4 9
1
/2 1 2 16
1
/4 3
3
/4
24 29
1
/8 7
1
/4 19
5
/8 27
11
/16 48
15
/32 1
1
/2-8 1.38 4 32 6 12 1
1
/2 3
3
/4-10 21
7
/16 4
Valve
Size Lug Body Wafer Body
14
1
/2 Sq. 2 22
3
/4
11
/16 1
1
/8-8 20 16
5
/8 4
25
/32 2
7
/8 x 6
15
/16
15
/16
13
/16 490 290
16
1
/2 Sq. 2 25
1
/2
11
/16 1
1
/4-8 20 17
5
/8 4
25
/32 2
7
/8 x 6
15
/16
15
/16
13
/16 650 360
18
5
/8 Sq. 2
1
/2 28
11
/16 1
1
/4-8 24 19
5
/32 4
25
/32 2
7
/8 x 6
15
/16
15
/16
13
/16 925 480
24
7
/8 Sq. 3
1
/2 36 1
1
/2-8 24 23
5
/8 1625 930
SEE ABOVE
Note: Minimum pipe I.D. required for disc swing
clearance: Schedule 80 pipe or equivalent.
10" - 12" Class 300 10" - 12" Class 300
Optional Flange Mounting
Bracket (Actuator Code-FG)
Note: Minimum pipe I.D. required for disc swing
clearance: Schedule 80 pipe or equivalent.
(18" - 24" 300 schedule XS only)
Optional Flange Mounting
Bracket (Actuator Code-FG)
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
Dimensional Data
Valve
Size
12 16
1
/4 5
17
/32 12
15
/16 19
37
/64 32
1
/4 1
1
/4-8 1.25 4 19
1
/4 4
3
/4 9
1
/2 1 2 11
1
/2 3
Valve
12
1
/2 Sq. 2 21.75
11
/16 1
1
/4-8 20 15
15
/16 4
25
/32 2
7
/8 x 6
15
/16
15
/16
13
/16 520 360
Valve
Size
3 5
3
/8 1
15
/16 5
1
/2 7
5
/8 11
5
/8
49
/64 2 6
5
/8 2 4
7
/16
7
/8
3
/8-16 2
5
/8
4 6
7
/8 2
3
/8 6
3
/4 8
7
/8 13
7
/8
57
/64 2 8
1
/2 2 4
7
/16
7
/8
3
/8-16 3
5
/8
6 9 2
29
/32 9 11
3
/4 18
15
/16 1
1
/64 4 11
1
/2 2
1
/8 4
1
/4
5
/8 1
1
/4
3
/8-16 5
5
/8 1
9
/16
8 11
1
/2 3
21
/32 9
7
/8 13
3
/8 21
1
/8 1
9
/64 4 13
3
/4 2
3
/4 5
1
/2
13
/16 1
5
/8
1
/2-13 7
5
/8 2
10 13
1
/2 4
21
/32 12 16
3
/8 26
7
/8 1
1
/4-8 1.38 4 17 2
3
/4 5
1
/2
13
/16 1
5
/8
1
/2-13 9
1
/2 2
3
/4
Valve
3
5
/8
7
/16 8
1
/4
3
/4-10 8 6
3
/8 2
1
/4 3
13
/32
11
/32 25 16
4
7
/8
5
/8 10
1
/2
7
/8-9 8 7
5
/8 2
1
/4 3
13
/32
11
/32 53 30
6
1
/4 Sq. 1
1
/8 13
5
/8 1-8 12 10
1
/8 3
1
/2
9
/16 85 52
8
5
/16 Sq. 1
3
/8 16
1
/8 1
1
/8-8 12 11
3
/8 3
1
/2 5
5
/16
11
/16
9
/16 165 105
10
3
/8 Sq. 1
3
/4 19
1
/2 1
1
/4-8 16 13
1
/2 3
1
/2 5
5
/16
11
/16
9
/16 329 225
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
Worm Gear Actuators
Worm gear actuators are available as optional equipment, for
DynaCentric valves sizes 3" through 8". All larger size valves
require worm gear actuators or power actuation.
Handle operated valves, sizes 3" through 8", can be converted
in the field to worm gear operation. No modification is required to
accommodate the addition of the worm gear unit.
W-K-MDynaCentric Valves Manual Actuators
Dimensions (inches) Weight (lbs)
Valve Size
and Class
A B C D E F (Dia.) G.O. Mtg.
3" 150/300/600 6
3
/8 2
5
/8 1
1
/8 6
3
/8 1
3
/4 8 13 3
1
/2
4" 150/300 6
3
/8 2
5
/8 1
1
/8 7
1
/4 1
3
/4 8 13 3
1
/2
4" 600 6
3
/8 2
5
/8 1
1
/8 7
5
/8 1
3
/4 8 13 3
1
/2
6" 150/300 6
3
/8 2
5
/8 1
1
/8 8
1
/2 1
3
/4 8 13 3
1
/2
6" 600 9
1
/8 3 1
3
/8 10
1
/8 2
1
/2 12 19 4
8" 150/300 9
1
/8 3 1
3
/8 10 2
1
/2 12 19 4
8" 600 13
1
/8 3
1
/4 1
1
/2 11
3
/8 3 18 33 8
10" 150 9
1
/8 3 1
3
/8 11 2
1
/2 12 19 4
10" 300 13
1
/8 3
1
/4 1
1
/2 12
3
/8 3 18 33 8
10" 600 15
1
/8 4
9
/16 2
5
/8 13
1
/2 3
1
/2 24 43 8
12" 150 13
1
/8 3
1
/4 1
1
/2 12
3
/4 3 18 33 8
12" 300 15
1
/8 4
9
/16 2
5
/8 13
3
/4 3
1
/2 24 43 8
12" 600 17
1
/8 4
9
/16 2
5
/8 15
15
/16 3
1
/2 30 49 18
14" 150 13
1
/8 3
1
/4 1
1
/2 13
1
/2 3 18 33 10
14" 300 17
1
/8 4
9
/16 2
5
/8 16
5
/8 3
1
/2 30 49 18
16" 150 15
1
/8 4
9
/16 2
5
/8 15
1
/32 3
1
/2 24 43 10
16" 300 17
1
/8 4
9
/16 2
5
/8 17
5
/8 3
1
/2 30 49 18
18" 150 17
1
/8 4
9
/16 2
5
/8 17
1
/2 3
1
/2 30 49 18
18" 300 18
1
/16 4
1
/2 2
1
/8 19
5
/32 4
5
/8 30 80 18
20" 150 17
1
/8 4
9
/16 2
5
/8 18
13
/16 3
1
/2 30 49 18
24" 150 18
1
/16 4
1
/2 2
1
/8 20
3
/4 4
5
/8 30 80 18
24" 300 20
5
/8 5
3
/25 2
5
/16 23
5
/8 6
1
/4 30 142 25
Dimensions (inches)
Valve Size
& Class
Handle
No.
Wt.
(lbs)
A B C D E
3" 150/300/600 H-16 12 6
3
/8 7
5
/8 4
1
/2 5
9
/16 6
4" 150/300 H-16 12 7
1
/4 8
1
/2 4
1
/2 5
9
/16 6
4" 600 H-36 18 7
5
/8 8
7
/8 4
1
/2 5
9
/16 10
6" 150/300 H-36 18 8
1
/2 9
3
/4 4
1
/2 5
9
/16 10
6" 600 H-46 18 10
1
/8 11
3
/4 4
1
/2 5
9
/16 10
8" 150 H-46 18 10 11
1
/2 4
1
/2 5
9
/16 10
Handle Actuators
CAUTION: Handle operated valves should be installed with seat down-
stream. Handles should only be used up to the following differential
pressures:
3" valves to 400 psi 4" valves to 300 psi
6" valves to 150 psi 8" valves to 50 psi
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO S E R I E S N E - C , N E - I , N E - D , N E I - T , 2" 1 2 "
Ref.
Reqd
Component
Material
No. Description
1 1 Body *
2 1 Seat *
3 1 Disc *
4 1 Upper Stem *
6 1 Lower Stem *
7 2 Spring Pin Stainless Steel
14 1 Retainer Stainless Steel
22 1 Top O-Ring Buna-N
23 Stem O-Ring Buna-N
24 2 Bearing Bronze
*See How to Order for material choices/styles.
Complete material specs on pages 222 and 223.
Reqd. for throttling valves only.
Parts
Detail
NE-C
NE-I
NEI-T
NE-D
How to Order (example: 6" NE-C, 200PSI, Wafer, Standard trim with handle 22124-1215311)
Base Part Body Body Stem Disc Seat
Actuation
Number Configuration Material* Material Material Elastomer
X X X X X X X X X X X
Based on
valve series
and shut off
pressure.
See page 203.
NE-C/NE-I/NEI-T
Wafer 1
Lug 5
NE-D
Wafer 1
NE- C (Longneck)
Ductile Iron (lug) 1
Cast Iron (wafer) 2
NE- I & NE-I Sanitary
Ductile Iron
1
(wafer only)
Aluminum Bronze 3
Carbon Steel
4
(NE-I only)
Aluminum
5
(wafer only)
ENC Coated
6
Ductile Iron
Stainless Steel 8
NE- D
Ductile Iron 1
NEI - T
Ductile Iron
WaferShortneck 1
LugLongneck
Gray Iron
2
(longneck wafer)
Aluminum Bronze 3
Carbon Steel 4
Aluminum
5
(wafer only)
Stainless Steel 8
NE- C & NE- I
416 SS 1
316 SS** 2
Monel
(6)
3
NE- D
416 SS 1
316 SS** 2
Monel
(6)
3
NEI - T
316 SS
2
Vented***
316 SS
9
Solid***
NE-I Sanitary
316 SS** 2
NE- C, NE- I
& NE- D
316 SS 2
Monel
(6)
3
Aluminum
Bronze
4
Ductile Iron
Nickel Plated 5
PVF Coated
6
Ductile Iron
(1)
Alloy 20
(2)
7
Hastelloy C
(6)
8
NE I- T &
NE-I Sanitary
316 SS/
PVF Coated 0
(NEI-T only)
316 SS
Polished
(3)
2
316 SS
Tumbled
(3)
5
Alloy 20
7
(NEI-T only)
Hastelloy C
8
(NEI-T only)
316 SS
Unpolished
(3)
9
NE - C, NE- I & NE- D
Buna-N 31
Black Neoprene 32
Hypalon
(6)
33
Viton
(6)
34
EPT 35
Natural Rubber 36
White Neoprene 37
ETM-30230 01
Fluorosteam 02
Food Grade EPT 03
Peroxide Cured
04
Buna-N
NEI-T
Buna-N/Teflon
(6)
31
Peroxide Cured
35
EPT/Teflon
(6)
Sulfur Cured
05
EPT/ Teflon
(6)
NE-I Sanitary
All Seats Food Grade
Buna-N 31
Black Neoprene 32
Viton 34
EPT 35
White Neoprene 37
Sulfur Cured EPT 05
Handle
10 Position Lkg. 1
(4)
Throttling
2
(4)
Mem./Stop
Square Nut 5
2 Position Lkg. 6
(4)
10 Position
Sanitary 8
(NEI-T only)
None 9
10 Position Lkg.
Corrosion K
resistant
2 Position Lkg.
Corrosion L
resistant
Throttling/
M
Mem. stop
Gear Operators
(5)
Hand Wheel A
Crank
(2"-12" only) B
Chain Wheel C
Square Nut D
Bare Stem E
**Standard coating is green enamel; other coatings available on request.
**17-4 PH SS for 8"-12" upper stem only.
***Except 17-4 PH upper 8" & 10".
1. 200 psi only.
2. Except 285 psi.
3. Polishedground to # 4 dairy finish, Tumbledvibratory finish to remove
as cast surface, Unpolishedas cast surface
4. When these options used with NE-I Sanitary butterfly valves, handles
will be bronze with SS parts and fasteners.
5. Gear operator recommended for 8"-12" sizes in all series.
6. See material trademark note on page 226.
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO S E R I E S N F - C , 1 4 " 2 4 "
Parts Detail
Ref.
Reqd
Component
Material
No. Description
1 1 Body *
2 1 Seat *
3 1 Disc *
4 1 Upper Stem *
6 1 Lower Stem *
7 2 Spring Pin Stainless Steel
14 1 Retainer (Spacer) Steel
23 Disc O-Ring Buna-N
24 2 Upper Bearing Bronze
25 1 Lower Bearing Bronze
*See How To Order for material choices/styles. Complete material specs
on pages 222 and 223.
4 Reqd. for throttling valves only.
14"20" Retainer, 24" Spacer.
Wafer 1
Lug 5
How to Order (example: 18" NF-C, 150PSI LUG, SS trim, Buna-N seat, WGO. 23822-512231A)
Base Part Body Body Stem Disc Seat
Actuation
Number Configuration Material* Material Material Elastomer
Based on
shut off
pressure.
See page 203.
Ductile Iron (lug) 1
Cast Iron (wafer) 2
Steel (lug) 4
Stainless Steel (lug) 8
416 SS 1
316 SS 2
Monel
(2)
3
316 SS 2
Monel
(2)
3
Aluminum
Bronze
4
Nickel Plated
Iron
5
PVF Coated
6
Ductile Iron
(1)
Buna-N 31
Black Neoprene 32
Hypalon
(2)
33
Viton
(2)
34
EPT 35
None 9
Gear Operators
Hand Wheel A
Chain Wheel C
Square Nut D
Bare Stem E
*Standard coating is green enamel; other coatings available on request.
(1)150 psi only.
(2)See material trademark note on page 226.
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO S E R I E S N F - C , 3 0 " 4 8 "
Parts Detail
Ref.
Reqd
Component
Material
No. Description
1 1 Body *
Seat Hard-Backed
2 1
30"- 36"
*
Seat Elastomer Liner
42"- 48"
3 1 Disc150 psi *
4 1 Upper Stem *
6 1 Lower Stem *
7 2 Disc Screw 18-8 SS
8 1 Key Stainless Steel
9 2 O-Ring Buna-N
14 1 Spacer Steel
24 2 Upper Bearing Bronze
25 1 Lower Bearing Bronze
26 1 Thrust Collar Bronze
27 1 Set Screw 18-8 SS
28 1 Cap
Duct Iron 30"- 36"
Cast Iron 42"- 48"
29 4 Screw Carbon Steel
30 4 Lockwasher Carbon Steel
*See How to Order for material choices/styles.
Complete material specifications on page 222 and 223.
Wafer 1
Lug 5
Flange 6
42"& 48"
How to Order (Example: 42", 150 psi, bronze disc, EPT seat with Gear Op 24106-621435A)
Base Part Body Body Stem Disc Seat Gear
Number Configuration Material* Material Material Elastomer Operators
See Page 203
Ductile Iron 1
(Wafer or lug)
Cast Iron 2
(Flanged only)
416 SS 1
316 SS 2
Monel 3
316 SS 2
Monel 3
Aluminum
Bronze
4
Ductile Iron
Nickel Plated
5
Buna-N 31
Black Neoprene 32
Hypalon 33
Viton 34
EPT 35
**Standard coating is green enamel;
other coatings available on request.
See material trademark note on page 226.
Hand Wheel A
Chain Wheel C
Square Nut D
Bare Stem E
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
Description 14" 16" 18" 20" 24"
DEMCO B U T T E R F L Y V A L V E S
Description 2" 2
1
/2" 3" 4" 5" 6" 8" 10" 12"
200 psi 22119 22120 22121 22122 22123 22124 22125 22126 22127
285 psi 22225 22226 22227 22228 22229 22230 22231 22232 22233
50 psi 22234 22235 22236 22237 22238 22239 22240 22241 22242
Throttling 22243 22244 22245 22246 22247 22248 22249 22250 22251
Wafer 5.8 7.0 7.7 11.4 14.7 17.6 28.5 47.9 71.0
Lug 8.0 9.9 10.7 17.0 24.5 28.5 43.5 65.9 98.5
Base Part Numbers/Weights
Series NE-C, 2"12"*
150 psi 23820 23821 23822 23823 23824
50 psi 24440 24441 24442 24443 24444
Throttling 24445 24446 24447 24448 24449
Wafer 102 166 214 257 401
Lug 116 203 239 332 535
Series NF-C, 14"24"
Weight
(lbsbare stem)
Description 2" 2
1
/2" 3" 4" 5" 6" 8" 10" 12"
200 psi 22181 22129 22182 22183 22184 22185 22134 22186 22136
285 psi 22279 22253 22280 22281 22282 22283 22258 22284 22260
50 psi 22285 22262 22286 22287 22288 22289 22267 22290 22269
Throttling 22291 22271 22292 22293 22294 22295 22276 22296 22278
Wafer 4.9 6.4 6.9 10.2 13.7 16.4 28.4 44.8 66.8
Series NE-D, 2"12"*
Weight
(lbs-bare stem)
Description 2" 2
1
/2" 3" 4" 5" 6" 8" 10" 12
200 psi 22128 22129 22130 22131 22132 22133 22134 22135 22136
285 psi 22252 22253 22254 22255 22256 22257 22258 22259 22260
50 psi 22261 22262 22263 22264 22265 22266 22267 22268 22269
Throttling 22270 22271 22272 22273 22274 22275 22276 22277 22278
Iron, Steel, SS 4.9 6.4 6.9 10.2 13.7 16.4 28.4 44.8 66.8
Bronze 4.7 6.2 6.7 9.9 13.4 16.0 28.0 44.3 66.3
Aluminum 2.8 3.4 4.1 5.9 8.7 10.8 18.2 30.4 47.2
Bronze 6.8 8.7 9.5 15.7 23.1 27.0 42.0 64.4 96.8
Steel, SS 7.0 8.9 9.7 16.0 23.5 27.5 42.5 64.9 97.5
Series NE-I, 2"12"*
Weight
(lbsbare stem)
Wafer
Weight
(lbsbare stem)
Lug
Description 2" 2
1
/2" 3" 4" 6" 8" 10"
150 psi 24680 24681 24682 24683 24684 24685 24686
Iron, Steel, SS 4.9 6.4 6.9 10.2 16.4 28.4 44.8
Bronze 4.7 6.2 6.7 9.9 16.0 28.0 44.3
Aluminum 2.8 3.4 4.1 5.9 10.8 18.2 30.4
Bronze 6.8 8.7 9.5 15.7 27.0 42.0 64.4
Steel, SS 7.0 8.9 9.7 16.0 27.5 42.5 64.9
Series NEI-T, 2"10"*
Weight
(lbs-bare stem)
Wafer
Weight
(lbs-bare stem)
Lug
Weight
(lbsbare stem)
Description 30" 36" 42" 48"
150 psi 24141 24357 24106 24832
Weights C/ F C/ F C/ F C/ F
Series NF-C, 30"48"
Description 2" 2
1
/2" 3" 4" 6" 8" 10" 12"
200 psi 23150 23151 23152 23153 23154 23155 23156 23157
Weights See chart above, NE-I, 2"12"
Series NE-I, Sanitary, 2"12"*
C/ F = Consult Factory.
*Gear Operator recommended for 8"12" sizes.
See NE-C chart above for weights of Long Neck Wafer and Lug valves.
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
Size A C D E F G H J K L N P R S
2" 1.74 5.62 8.44 4.12 4.00 3.25 .408 4.75
5
/8-11 4 1.00 .44 .625 .375
2
1
/2" 1.86 6.12 9.19 4.88 4.00 3.25 .408 5.50
5
/8-11 4 1.00 .44 .625 .375
3" 1.86 6.38 9.69 5.38 4.00 3.25 .408 6.00
5
/8-11 4 1.00 .44 .625 .375
4" 2.11 7.12 11.00 6.88 4.00 3.25 .408 7.50
5
/8-11 8 1.00 .44 .625 .375
5" 2.24 7.75 12.12 7.75 4.00 3.25 .408 8.50
3
/4-10 8 1.25 .44 .838 .500
6" 2.24 8.25 13.25 8.75 4.00 3.25 .408 9.50
3
/4-10 8 1.25 .44 .838 .500
8" 2.54 9.44 15.56 11.00 6.00 5.0 .533 11.75
3
/4-10 8 1.38 .56 .838 .500
10" 2.74 11.25 18.69 13.38 6.00 5.0 .533 14.25
7
/8-9 12 1.38 .56 .963 .625
12" 3.24 12.19 21.69 16.12 6.00 5.0 .533 17.00
7
/8-9 12 1.38 .56 1.338 .750
Note: For general dimensions, see page 219.
Size A B C D E G H J K L M N P R S T U
14" 3.00 10.63 12.75 23.4
16.20
5.00 .56 18.75
1-8
12 2.00 2.25 .88 1.375
5
/16
5
/32 5.12 12.89
17.3* 1*
16" 4.00 11.66 13.75 25.4
18.16
5.00 .56 21.25
1-8
16 2.00 2.25 .88 1.625
3
/8
3
/16 5.65 14.76
19.2* 1*
18" 4.50 12.96 14.75 27.7
20.35
6.50 .81 22.75
1
1
/8-7
16 2.50 2.75 1.00 1.875
1
/2
3
/16 6.37 16.63
21.4* 1
1
/8*
20" 5.00 13.97 15.75 29.7
22.63
6.50 .81 25.00
1
1
/8-7
20 2.50 2.75 1.00 1.875
1
/2
3
/16 7.12 18.58
23.6* 1
1
/8*
24" 6.00 16.19 19.00 35.2
27.31
6.50 .81 29.50
1
1
/4-7
20 2.50 3.00 1.00 1.875
1
/2
3
/16 8.67 22.56
28.3* 1
1
/4*
*Wafer valve dimension is the bottom figure.
Lug valve dimension is the top figure.
Series NF- C, 14"24"
Series NE- C, 2"12"
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
Series NF- C, 30" 48"
Size A B C D E G H J K L M N P R S T U V W X
30" 6.50 21.2 23.0 44.2 34.1 8.00 .69 36.00 1
1
/4-7UNC 28 3.4 3.7 1.2 3.000
3
/4
3
/8 11.45 28.55 1.75
36" 7.88 25.0 27.8 52.8 40.5 10.25 .81 42.75 1
1
/2-6UNC 32 4.0 4.4 1.2 3.625
7
/8
7
/16 13.86 34.71 1.75
42" 9.88 28.9 31.5 60.4 53.0 10.25 .81 49.50 1
1
/2-6UNC 32* 3.88 3.88 1.50 4.240
3
/4
3
/8 15.67 40.02 1.75 2.625
48" 10.81 33.2 34.8 68.0 59.5 16.00 .81 56.00 1
1
/2-6UNC 36* 5.00 6.00 1.50 4.995 1
1
/4
5
/8 18.29 46.15 1.625 2.75
*42" 36 holes total per side.
48" 44 holes total per side.
4
8
2" 1.74 3.94 6.75 4.12 4.00 3.25 .408 4.27
3
/8 4 1.00 .44 .625 .375
2
1
/2" 1.86 4.44 7.50 4.88 4.00 3.25 .408 5.31
3
/8 4 1.00 .44 .625 .375
3" 1.86 4.88 8.19 5.38 4.00 3.25 .408 4.91
3
/8 6 1.00 .44 .625 .375
4" 2.11 6.00 9.88 6.88 4.00 3.25 .408 7.03
1
/2 6 1.00 .44 .625 .375
5" 2.24 6.00 10.38 7.75 4.00 3.25 .408 7.56
1
/2 6 1.25 .44 .838 .500
6" 2.24 6.50 11.50 8.75 4.00 3.25 .408 9.16
1
/2 8 1.25 .44 .838 .500
8" 2.54 8.06 14.19 11.00 6.00 5.0 .533 11.72
5
/8 8 1.38 .56 .838 .500
10" 2.74 9.97 17.41 13.38 6.00 5.0 .533 13.72
5
/8 8 1.38 .56 .963 .625
12" 3.24 10.91 20.41 16.12 6.00 5.0 .533 16.62
1
/2 12 1.38 .56 1.338 .750
Series NE-D, 2" 12"
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
Series NE-I, NE- I Sanitary, 2"12"
2" 1.74 3.94 6.75 4.12 4.00 3.25 .408 4.75
5
/8-11 4 1.00 .44 .625 .375
2
1
/2" 1.86 4.44 7.50 4.88 4.00 3.25 .408 5.50
5
/8-11 4 1.00 .44 .625 .375
3" 1.86 4.69 8.00 5.38 4.00 3.25 .408 6.00
5
/8-11 4 1.00 .44 .625 .375
4" 2.11 5.44 9.31 6.88 4.00 3.25 .408 7.50
5
/8-11 8 1.00 .44 .625 .375
6" 2.24 6.38 11.88 8.75 4.00 3.25 .408 9.50
3
/4-10 8 1.25 .44 .838 .500
8" 2.54 8.06 14.19 11.00 6.00 5.0 .533 11.75
3
/4-10 8 1.38 .56 .838 .500
10" 2.74 9.97 17.41 13.38 6.00 5.0 .533 14.25
7
/8-9 12 1.38 .56 .963 .625
Series NEI-T, 2"10"
2" 1.74 3.94 6.75 4.12 4.00 3.25 .408 4.75
5
/8-11 4 1.00 .44 .625 .375
2
1
/2" 1.86 4.44 7.50 4.88 4.00 3.25 .408 5.50
5
/8-11 4 1.00 .44 .625 .375
3" 1.86 4.69 8.00 5.38 4.00 3.25 .408 6.00
5
/8-11 4 1.00 .44 .625 .375
4" 2.11 5.44 9.31 6.88 4.00 3.25 .408 7.50
5
/8-11 8 1.00 .44 .625 .375
5"* 2.24 6.38 10.75 7.75 4.00 3.25 .408 8.50
3
/4-10 8 1.25 .44 .838 .500
6" 2.24 6.88 11.88 8.75 4.00 3.25 .408 9.50
3
/4-10 8 1.25 .44 .838 .500
8" 2.54 8.06 14.19 11.00 6.00 5.0 .533 11.75
3
/4-10 8 1.38 .56 .838 .500
10" 2.74 9.97 17.41 13.38 6.00 5.0 .533 14.25
7
/8-9 12 1.38 .56 .963 .625
12" 3.24 10.91 20.41 16.12 6.00 5.0 .533 17.00
7
/8-9 12 1.38 .56 1.338 .750
*NE-I Sanitary 5" not available.
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO B U T T E R F L Y V A L V E H A N D L E S
*For Throttling Memory Stop Handle only.
How to Order ( XXXXX- 0 0 X)
Base Part
Trim
Number
X X X X X 00X
Standard 1
Corrosion 2
Resistant
Sanitary 3
Description 2"- 4" 5"- 6" 8" 10" 12"
10 Position, Std, CR 24227 24228 24229 24230 24231
2 Position, Std, CR 24232 24233 24234 24235 24236
10 Position, Sanitary 22319 22320 22321 22322 22323
2 Position, Sanitary 22324 22325 22326 22327 22328
Throttling, Std/CR 24252 24253 24254 24255 24256
Throttling, Sanitary 22329 22330 22331 22332 22333
Square Nut, Std 23356 23357 23358 23359 22360
Dimension 2"- 4" 5"- 6" 8"- 12"
M 9.50 11.00 15.00
N .85 1.07 1.13
Dimension 2"- 4" 5"- 6" 8"- 12"
M 9.50 11.00 15.00
N .87 1.07 1.13
2 Position/10 Position Locking Handles
2 Position/10 Position Locking Handle Infinite Throttling with Memory Stop Handle
Ref. Component
No. Description
5 Screw Steel Stainless Steel Stainless Steel
8 Handle Ductile Iron Ductile Iron Bronze
10 Latch Zinc Plated Steel Stainless Steel Stainless Steel
11 Spring Spring Steel Stainless Steel Stainless Steel
12 Spring Pin Spring Steel Stainless Steel Stainless Steel
15 Throttle Plate Zinc Plated Steel Stainless Steel Stainless Steel
16 Lockwasher Steel Stainless Steel Stainless Steel
19 Nut Steel Stainless Steel Stainless Steel
20 Set Screw Steel Stainless Steel Stainless Steel
25* Throttling Tab Zinc Plated Steel Stainless Steel Stainless Steel
26* Carriage Bolt Steel Stainless Steel Stainless Steel
27* Wing Nut Steel Stainless Steel Stainless Steel
28* Screw Steel Stainless Steel Stainless Steel
29* Nut Steel Stainless Steel Stainless Steel
Material
Standard Corrosion Resistant Sanitary
Infinite Throttling with Memory Stop Handle
Square Nut Handle
Component
Description
Square Nut Hub Ductile Iron
Throttle Plate Steel
Screw Steel
Set Screw Steel
Screw Steel
Lock Washer Spring Steel
Material
Note: These throttling
plates and latch apply to
Sanitary Trim handles only.
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO W E A T H E R P R O O F G E A R O P E R A T O R S
Manual worm gear operators are self locking in all positions.
Adjustment screws stop travel at open and closed positions.
Position indicator is standard on all models. Gearing is perma-
nently lubricated. Gray iron weatherproof case and cover
enclose a ductile iron gear and hardened steel worm supported
by bronze bearings. Standard external coating is green enamel;
white epoxy, coal tar epoxy and inorganic zinc primer available,
special order.
Gray Iron 2
How to Order, 2" 12" (Example: 6" Gear Operator with Handwheel 22622-21352)
Base Part Case Gear
Actuation
Valve
Configuration
Number Material Material Size
X X X X X X X X X X
Ductile Iron 1 Standard 2 Crank 1
Handwheel 3
Chainwheel 5
Square Nut 6
None 9
2" 4" 1
5" 6" 5
8" 7
10" 8
12" 9
Description 2"4" 5"6" 8" 10" 12"
Operator Base No. 22622 22623
Additional Information
Chain Suffix = Length in Ft.* 4462-XXX
Weight (lbs. with handwheel) 11.0 17.0 17.4 17.4
*Chain Length (XXX) = 0 through 999 ft. (Chain ordered separately)
Valve Size Gear Ratio Turns/90 Rotation Maximum Input Torque
2" 6" 30:1 7.5 46 ft.-lbs.
8" 12" 48:1 12 65 ft.-lbs.
14" 16" 48:1 12 65 ft.-lbs.
18" 20" 57:1 14 -1/4 98 ft.-lbs.
24" 60:1 15 164 ft.-lbs.
30" 316:1 79 104 ft.-lbs.
36" 240:1 60 174 ft.-lbs.
42" 360:1 90 147 ft.-lbs.
48" C/F C/F C/F
Description 14" 16" 18"20" 24" 30" 36" 42" 48"
Operator Base No. 2060229 2060230 2060231 2060232 2060332 2060334 2060805 2060806
Additional Information
Chain Suffix = Length in Ft.* 4462-XXX 4463-XXX 4463-XXX 19932-XXX 4463-XXX 19932-XXX C/ F C/ F
Weight (lbs. with handwheel) 19.0 22.0 33.0 43.0 107.0 137.0 C/ F C/ F
*Chain Length (XXX) = 000 through 999 ft. (Chain ordered separately)
C/F = Consult Factory
How to Order, 14 " 48"
Base Part Gear Operator
Number Assembly Part Number
X X X X X X X X X
Gear Operator Less Actuation 09
Gear Operator With Handwheel 03
Gear Operator With Chainwheel 05
Gear Operator With Square Nut 06
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO W E A T H E R P R O O F G E A R O P E R A T O R S
A B C D E F G H J K L M M1 N P R S T U V Valve Size
2.25 2.25 3.38 1.75 2.25 5.00 1.06 2.38 .63 1.00 .19 4.35 6 4.35 3.65 3.50 4.80 4.15
2.88 2.88 3.38 2.50 2.88 6.50 1.38 3.00 .63 1.00 .19 4.32 6 4.32 3.72 3.50 4.80 4.12
2.88 2.88 3.38 2.50 2.88 6.50 1.38 3.00 .63 1.00 .19 5.02 8 4.32 3.72 3.50 4.80 4.12
2.88 2.88 5.12 2.50 2.88 6.50 1.38 3.00 .63 1.25 .19 6.56 12 5.88 5.25 5.81 5.75 5.69
2.88 2.88 5.88 2.50 2.88 6.50 1.38 3.00 .63 1.25 .25 11.00 18 7.69 6.38 9.12 8.69 6.75
3.12 3.12 7.12 3.00 3.12 7.69 1.50 3.25 1.00 1.25 .25 11.25 18 8.94 7.63 9.12 8.69 8.00
3.44 3.44 5.28 3.63 3.25 8.38 1.63 3.56 1.00 1.25 .38 10.91 24 7.59 5.91 11.00 12.25 6.16
4.56 8.88 4.52 4.63 4.63 11.08 2.00 4.44 1.00 1.25 .39 6.00 7.38 8.65 18 7.59 6.28 9.12 8.69 5.41
5.88 9.12 4.56 6.25 5.88 14.50 2.31 5.00 1.00 1.25 .39 6.36 8.00 10.19 24 8.13 6.44 11.00 12.25 5.44
5.88 9.12 5.50 6.25 5.88 14.50 2.31 5.00 1.00 1.25 .39 6.36 8.25 C/F C/F C/F C/F C/F C/F C/F
C/F C/F C/F C/F C/F C/F C/F C/F C/F C/F C/F C/F C/F C/F C/F C/F C/F C/F C/F C/F
C/F = Consult Factory.
2"6"
8"10"
12"
14"
16"
18"20"
24"
30"
36"
42"
48"
2" 24" Valves
2" through 24" Valves
Optional Handwheel
Optional Square Nut
Optional Chainwheel
Valves with chainwheels should be installed upside down
as noted to ensure pipe clearance and allow visual contact
with the position indicator.
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO D R S E R I E S P I S T O N A C T U A T O R S
J024872-0 XX X X
Assembly Part Number Actuator
Orientation
Actuator Size
EDA 40 01
EDA 65 02
EDA 100 03
EDA 200 04
EDA 350 05
PDA 500 06
PDA 700 07
PDA 1100 08
PDA 2500 09
PDA 4000 10
Valve Size
2"- 4" 1
5" & 6" 2
8" 3
10" 4
12" 5
14" 6
16" 7
18" 8
Orientation
See drawing 0
See drawing 3
Supply Pressure (psi)
Actuator
Model
40 60 80 100 120
EDA40 204 310 416 513 620
EDA65 310 469 628 788 947
EDA100 460 699 929 1168 1398
EDA200 1009 1522 2044 2558 3071
EDA350 1761 2655 3549 4443 5337
PDA500 2339 3531 4722 5913 7104
PDA750 3479 5251 7022 8794 10566
PDA1100 5131 7744 10357 12970 15583
PDA2500 11825 17847 23869 29891 35912
PDA4000 19962 30127 40293 50458 60623
Actuator Torque Output (in-lb), Double Acting
Consult factory for complete data sheets with dimensional information.
Valve Size 2" 2-1/2" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36" 42" 48"
285 psi Shut Off 225 326 510 765 1190 1530 2550 4125 7000
200 psi Shut Off 132 192 300 450 700 900 1500 2650 4500
150 psi Shut Off 7740 10280 12600 15600 30000 50000 67500 10700 155000
50 psi Shut Off 108 108 192 264 450 550 1000 1800 3000 4500 6500 8400 10800 20000 30000 50000 79180 115000
Throttling* 72 72 90 108 144 180 350 700 1160 1660 2800 3400 5000 8400
Butterfly Valve Torques (except Series NE I-T)** Normal Wet Opening
Valve Size 2" 2-1/2" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36" 42" 48"
285 psi Shut Off 338 489 765 1148 1785 2295 3825 6188 10500
200 psi Shut Off 198 288 450 675 1050 1350 2250 3975 6750
150 psi Shut Off 11610 15420 18900 23400 45000
50 psi Shut Off 162 162 288 396 675 825 1500 2700 4500 6750 9750 12600 16200 30000
Throttling* 144 144 180 216 288 360 700 1400 2320 3320 5600 6800 10000 16800
Butterfly Valve Torques (except Series NE I-T)** Three-Way Assemblies
* When line velocity exceeds 15 feet per second, dynamic torque exceeds opening torque.
** For Series NEI-T Butterfly Valve torque requirement, consult factory.
Demco Series DR Piston Actuators consist of two opposed pis-
tons with integral gear racks which are coupled to a common cen-
tral drive shaft to produce rotary motion.
In the basic unit, the Body, Pistons and End Caps are alu-
minum; the Central Drive Shaft is hard anodized, high perfor-
mance Aluminum Alloy 70-75. The Fasteners are plated steel; the
Seals are Buna-N. All units are totally enclosed and use gaskets
for weatherproof operation. Carbon filled teflon guide bands sup-
port the pistons to eliminate metal-to-metal contact during actua-
tor operation. As a result, piston o-rings designed for sealing are
not required to perform bearing functions.
Mounting the actuator to the valve for many popular sizes is
direct, requiring only a splined, aluminum stem adapter. Other sizes
may require the addition of an aluminum adapter plate, but still
make a closed coupled unit. Some sizes (mostly the larger valves)
will require the traditional steel brackets/coupling mounting kit.
Consult the factory for complete data sheets showing mounting con-
figurations. Flatted stems are standard on 2"-12" Butterfly Valves
(NE-C, NE-I, NE-D), whereas 14"-48" NF-C utilize a keyed stem.
Series DR Actuators are available as Double-Acting or Spring
Return. Double-Acting is the most economical, requiring either air
or hydraulic pressure for opening and closing (fail last position).
Spring-Return Actuators use compression
spring(s) to move valve in one direction,
while air pressure moves it in the
opposite direction. Spring Return
Actuators are used when valves
must move to a predetermined
position upon air supply failure
(fail open or fail closed).
Orientation 0
Open
Close
Orientation 3
Remove indicator
for access to manual
override wrench flats
Double Acting Actuator for NE-C, NE-I, NE-D and NF-C
Butterfly Valves
Orientation 0
Orientation 3
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
Air Stroke Supply Pressure (psi)
40 60 80 100 120
Spring
Stroke
Actuator
Model
Spring
Set No.
C D C D C D C D C D E F
2 133 82 243 193 117 73
ESA40
3 91 15 201 125 312 236 422 346 176 110
4 159 58 270 169 380 279 491 389 234 146
5 227 101 338 212 448 322 293 183
6 185 34 296 144 406 255 351 220
2 196 117 364 285 186 117
ESA65
3 129 10 297 178 466 347 634 515 279 175
4 230 71 398 240 567 408 735 576 372 234
5 331 133 499 301 668 470 465 292
6 432 194 601 363 558 351
2 303 192 552 441 258 161
ESA100
3 211 44 460 293 709 541 957 790 387 242
4 367 144 616 393 865 642 1114 891 516 323
5 523 245 772 494 1021 743 646 402
6 430 96 679 345 928 594 775 484
2 656 406 1201 952 579 362
ESA200
3 448 74 994 619 1539 1165 2085 1710 868 542
4 786 287 1331 832 1877 1378 2423 1923 1157 723
5 1124 500 1669 1045 2215 1591 1447 904
6 916 167 1461 713 2007 1258 1736 1085
2 1105 684 2053 1632 1025 658
ESA350
3 727 95 1675 1043 2623 1991 3571 2939 1537 987
4 1296 454 2244 1402 3193 2350 4141 3299 2049 1317
5 1866 814 2814 1762 3762 2710 2531 1646
6 2436 1173 3384 2121 3074 1975
* Select from Torque Chart
J024873- X XX X X
Actuator Size
ESA 40 01
ESA 65 02
ESA 100 03
ESA 200 04
ESA 350 05
Springs*
Spring Set 2 2
Spring Set 3 3
Spring Set 4 4
Spring Set 5 5
(Standard)
Spring Set 6 6
Valve Size
2"- 4" 1
5" & 6" 2
8" 3
10" 4
12" 5
14" 6
Orientation
See drawing 0
See drawing 3
Actuator Torque Output (In.-Lb.)
F
D
90
End
0 90
Spring Stroke
E
0
Start
C
A
D E
91.5
F
C
The actuator shaft
is shown rotated
CW -0.5
Pressure on Port "A"
Rotates shaft CCW.
CCW 91
Air Stroke
Rotation
Counterclockwise
Rotation
Clockwise
B (Breather)
End
Start
Spring Set #2
Mid Spring Only
Spring Set #3
Outer Spring Only
Spring Set #4
Inner Spring
Outer Spring
Spring Set #5
Mid Spring
Outer Spring
Spring Set #6
Inner Spring
Mid Spring
Outer Spring
Spring Set Arrangement
* Consult factory for complete data sheets with dimensional information
Open Close
Actuator Orientation
Orientation 0
Spring Close
(Stroke C & F)
Orientation 3
Spring Open
(Stroke D & E)
Spring Return Actuator ESA 500 through ESA 4004 for
NE-C, NE-I, NE-D and NF-C Butterfly Valves
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
* Select from
Torque Chart
J024873- X XX X X
Spring Return Actuator PSA 500 through PSA 4004 for
NE-C, NE-I, NE-D and NF-C Butterfly Valves
Actuator Size
500 06
750 07
1100 08
2500 09
4000 10
4004 11
No. of Springs*
8 Springs 4
10 Springs 5
12 Springs 6
14 Springs
7
(Standard)
Valve Size
4" 1
5" & 6" 2
8" 3
10" 4
12" 5
14" 6
16" 7
18"- 24" 8
Orientation
See drawing 0
See drawing 3
Air Stroke Supply Pressure (psi)
40 60 80 100 120
Spring
Stroke
Actuator
Model
Spring
Set No.
C D C D C D C D C D E F
8 2526 1108 3718 2299 2268 904
PSA500
10 2275 502 3467 1693 4658 2884 2835 1130
12 3216 1087 4407 2279 5598 3470 3402 1356
14 4156 1673 5347 2864 3969 1582
8 3827 1983 5598 3755 3059 1282
PSA750
10 3471 1166 5243 2938 7014 4709 3823 1602
12 4887 2121 6658 3893 8430 5684 4588 1922
14 4531 1304 6302 3076 8074 4847 5352 2243
8 2909 859 5522 3472 8135 6085 3999 2000
PSA1100
10 4966 2404 7579 5017 10192 7630 4998 2500
12 4410 1336 7023 3949 9636 6562 12249 9175 5998 3000
14 6468 2881 9081 5494 11694 8107 6997 3501
8 7533 3750 13555 9772 7558 3863
PSA2500
10 6460 1731 12482 7753 18504 13775 24525 19796 9448 4629
12 11409 5734 17430 11756 23452 17778 11338 5794
14 10336 3715 16357 9737 22379 15759 28401 21781 13227 6760
8 11288 3299 21454 13465 31619 23630 15596 7806
PSA4000
10 19282 9299 29451 19464 39616 29630 19495 9758
12 17117 5133 27282 15299 37447 25464 47613 35629 23395 11710
14 25114 11133 35279 21298 45444 31484 27294 13661
8 19156 11259 29322 21425 39487 31590 17661 9874
PSA4004
10 16414 6542 26579 16708 36744 26873 46910 37038 22076 12343
12 23836 11991 34001 22156 44167 32321 28491 14811
14 21093 7273 31258 17439 41424 27604 30906 17280
Open Close
Orientation 0
Spring Close
(Stroke C & F)
Orientation 3
Spring Open
(Stroke D & E)
F
D
90
End
0 90
Spring Stroke
E
0
Start
C
A
D E
91.5
F
C
The actuator shaft
is shown rotated
CW -0.5
Pressure on Port "A"
Rotates shaft CCW.
CCW 91
Air Stroke
Rotation
Counterclockwise
Rotation
Clockwise
B (Breather)
End
Start
8 Springs 10 Springs 12 Springs 14 Springs
Actuator Torque Output (In.-Lb.), Spring Return
Spring Arrangement
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO D R S E R I E S P I S T O N A C T U A T O R A C C E S S O R I E S
Position Indicator Switches
*
Position Indicator Switches are available to
provide an electrical contact closure at open
and closed positions, normally used for On-
Off service. Independently adjustable SPDT
switch elements are arranged so that each end
of the valve travel is indicated by separate circuit closures.
Positioners
*
Pneumatic positioners are offered for modulating
service. The standard signal range is 3-15 psi, and
may be generated by temperature,
pressure or level controllers.
Solenoid Valves
*
Solenoid Valves are used to direct
supply air to the actuator to open and close the butterfly valve
at the command of an on/off electrical signal. Direct attachment
to the actuator through a manifold eliminates all external piping.
Pressure connections are 1/4 NPT. Standard voltage is 120
VAC; other voltages are available on special order. NEMA 4
weatherproof or NEMA 7 explosion-proof enclosures are avail-
able. Solenoid valves are available as 3-way valves for spring
return actuators or 4-way for double acting actuators. Four-way
solenoids are equipped with a push button manual override.
Exhaust metering valves are available to control opening and
closing speed of the butterfly valve.
Declutchable Manual
Worm Gear Overrides
Declutchable Manual Worm
Gear Overrides are available for
size 40 through 4004 DR actuators. Especially applicable to
spring return actuators, the handwheel can be engaged with a
special declutch lever to hold the valve in its last position until
the actuator is returned to automatic operation.
Series DR Actuator Seal Kit
Seal Kits consist of all rubber seals,
bushings and guide bands required
to repair either double acting
or spring return actuators.
P500 through P4004 Actuator Size E40 through E350
Valve Position Indicator Switch Assembly 2-SPDT.
Aluminum housing meets Nema 4, 6, 7, 8 & 9
Solenoid Valves for Double Acting Actuators
Solenoid Valves for Spring Return Actuators
Exhaust Metering Valves for Double Acting
Actuators with Solenoid Valve
Speed Control Valve Assembly for Spring
Return Actuators without Solenoid Valve
Speed Control Valve Assembly for Spring
Return Actuators with Solenoid Valve
Positioner Assembly, Pneumatic for Double
Acting Actuators 3 psi Close, 15 psi Open
Positioner Assembly, Pneumatic for Spring
Return Actuators 3 psi Close, 15 psi Open
Positioner Assembly, Electro Pneumatic for Double
Acting Actuators 4 MaDC Close, 20 MaDC Open
Positioner Assembly, Electro Pneumatic for Spring
Return Actuators 4 MaDC Close, 20 MaDC Open
Note: Declutchable manual override and dual stroke adjustment available for all actuators. Consult factory for pricing.
* Series DR Actuator auxiliary interface complies with NAMUR.
Consult factory for complete data sheets with dimensional information
24877-021 24877-026
24495-004 (NEMA 4 120 VAC)
24495-007 (NEMA 7 120 VAC)
24496-004 (NEMA 4 120 VAC)
24496-007 (NEMA 7 120 VAC)
5830-250 (2 Required)
21604
24876
2061835-12-04 (Orientation 0) 2061836-12-04 (Orientation 0)
E40 E65 E100 E200 E350 P500 P750 P1100 P2500 P4000
2726023-01 2726023-02 2726023-03 2726023-04 2726023-05 17808-005 17808-006 17808-007 17808-008 17808-009
Model No.
Seal Repair Kit
Part No.
Series DR Actuator Accessory Part Numbers
Position
Indicator
Switch
Optional
Gage Block
OPEN
CLOSED
CLOSED
OPEN
Declutch
Lever
Handwheel
Manual
Override
3-Way
Solenoid
Valve
4-Way
Solenoid
Valve
A
B
D
E
S
O
P O
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO E L E C T R I C A C T U A T O R S
Electric Actuators
Electric Actuators are particularly suitable for installation in
remote locations not provided with a pressurized air source.
Electric Actuators are fail in last position, and generally not
available as fail-safe.
Electric Actuators are powered
by a rugged high-torque, integral
reversible motor rated for 50%
duty cycle. All models feature
a disengageable manual override. Travel limit switches are set
at the factory for open and closed valve positions, and they can
also be used for end-of-travel light indication. Every unit has a
built-in thermal overload protector, an easily accessible, clearly
marked terminal strip, a visual
output shaft position indicator,
permanent lubrication, and can
be mounted and run in position.
Voltage
120 VAC/1 Ph
(1)
1
220 VAC/1 Ph
(1)
2
220 VAC/3 Ph
w/o Rev. Contactor
(2)
6
440 VAC/3 Ph
w/ Rev. Contactor
(2)
7
220 VAC/3 Ph
w/o Rev. Contactor
(2)
8
440 VAC/3 Ph
w/o Rev. Contactor
(2)
9
Feedback Potentiometer
Ohm (1% Linearly)
1000 3
None 9
Auxiliary Switches
15 amp/125 VAC
(4)
2 SPDT
(5)
2
4 SPDT 4
None 9
Enclosure & Brake
NEMA 4 with Brake 3
(AC Only)
NEMA 7 with Brake 4
(AC Only)
(6)
10/10 03
10/30 07
10/60 08
50/10 23
50/30 27
50/60 28
90/5 31
90/15 34
100/16 45
100/30 47
100/60 48
160/8 52
160/16 55
160/30 57
160/60 58
250/8 62
250/16 65
250/30 67
250/60 68
800/30 77
800/60 78
1600/55 16
4000/125 40
Size Number
10 through 800 5065
1600 through 4000 50651
Heater/Thermostat
25 Watt Heater/ 1
70 Thermostat
(3)
None 9
Electric Actuator Part Number (order mounting assembly as separate part number, see table below)
Actuator Size
10 50 90 100 160 250 800 1600 4000
Cycle Time
(In Seconds)
5 - - 1000 - - - - - -
8 - - - - 1920 3000 - - -
10 275 600 - - - - - - -
15 - - 1000 - - - - - -
16 - - - 1500 2000 4000 - - -
30 300 600 - 1800 2500 5000 10000 - -
55 - - - - - - - 21000 -
60 400 600 - 2500 3000 6000 10000 - -
125 - - - - - - - - 48000
Output Torque, Electric Actuators (Pounds-Inches)
(1)
(1)
Reduce torque output and increase cycle time 20% for 50 Hz operation
30 second minimum cycle time positioning service
(2)
Consult factory for complete data sheets with dimensional information
2"- 4" 22903 22907 - -
5"- 6" 22904 22908 - -
8" 22905 22909 - -
10" 22906 22910 22912 -
12" - 22911 22913 -
14"through 30" Consult Factory
Mounting Assemblies
(2)
XXXXX - X X XX X X X
Model/Cycle Time (Sec.)
(4) Switches are indepen-
dently adjustable
(5) Standard on sizes
100 through 800
Manual
Override
Model
100-800
Manual
Override
Model
10-90
Manual Override
Size 25 through 800 Size 1600 and 4000
Valve
Size
(1) 50% Duty Cycle
(2) 25% Duty Cycle
(3) Recommended for outdoors, high humidity, low temperature, or modulating
(6) NEMA 7 models meet Classes I and II, Groups C-D-E-F and G requirements for hazardous locations.
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO D I A P H R A G M A C T U A T O R S
Spring Diaphragm Actuators*
Spring Diaphragm Actuators have the characteristics of spring-
return cylinders but are applicable to lower air supply pressures.
The larger area of the diaphragm as compared to a cylinder pro-
vides greater force from the same supply pressure. Demco Series
R diaphragm actuators for butterfly valves with drilled stems uti-
lize a heavy-duty rack-and-pinion linkage to operate the valve.
Diaphragms are made with steel case and diaphragm plates,
Nylon-reinforced Buna-N diaphragm,
303 SS stem and Buna-N seals.
Rack-and-pinion components are
ductile
iron or
steel.
Note: Where a part number suffix contains an x (example: -xxx), the Assembly Part Number chart should be used to derive the desired option(s).
Service
Pneumatic 1
Base Number
From table
below
Valve Size
2"- 4" 1
5" - 6" 5
8" 7
10" 8
12" 9
Diaphragm Size
DMC-35 2
DMC-50 3
DMC-80 4
DMC-80A 5
DMC-160A 7
DMC-160B 8
Air Pressure
3-15 psi 1
20 psi 2
30 psi 3
40 psi 4
Orientation
0
1
XXXXX - X X X X X
Diaphragm Actuator Part Number
35 50 80 80A 160A 160B
23766-12xxx 23766-13xxx 23766-14xxx 23766-15xxx 23766-17xxx 23766-18xxx
Size
Diaphragm Actuator Assembly Part Numbers
Standard Actuator
Supply Pressure, psi DMC-35 DMC-50 DMC-80 DMC-80A DMC-160A DMC-160B
3-15 255 480 575 - 905 -
20 450 570 635 - 1605 -
30 545 705 - 1080 1890 2100
40 600 860 - 1800 - 3300
Series R Diaphragm Actuator Torque Output (Inch-Pounds)
Without Visual Indicators With Visual Indicators
2-SPDT 23097-911 23097-111
2-DPDT 23097-921 23097-121
2-SPST 23097-931 23097-131
2-SPDT 23097-941 23097-141
2-SPDT 23098-911 23098-111
2-DPDT 23098-921 23098-121
2-SPST 23098-931 23098-131
2-SPDT 23098-941 23098-141
3-15 psi....23099-011 3-9 psi....23099-021 9-15 psi....23099-061
12826-001
8417-102 8417-103 8417-104 8417-107
Series R Diaphragm Actuator Accessory Part Numbers
NEMA 4 & 4x Mechanical Switch
NEMA 4 & 4x Proximity Switch
NEMA 4, 4x & 7 Mechanical Switch
NEMA 4, 4x &7 Proximity Switch
Weatherproof
Position Indicator
Switch Assemblies
Explosion Proof
Position Indicator
Switch Assemblies
Positioner
Filter Regulator
Diaphragm Repair Kit
CCW CCW
Close Counter-clockwise 0
Open Counter-clockwise 1
Close Counter-clockwise 2
Open Counter-clockwise 3
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO S T E M E X T E N S I O N S , T E E S A N D A D A P T E R S
How to Order, 2" 12"
Base Part Length
Number ( inches)
X X X X X X X X
Base Part Length
Number ( inches)
X X X X X X X 0 0
Stem Extensions
Fabricated from carbon steel or
stainless steel, stem extensions are
contained in a tubular housing.
Lengths from 3 inches to 16 feet are fabricated to order.
Torsional deflection of lengths over 16 feet requires special
design consideration and is available by special order only.
Description 2" 4" 5"6" 8" 10" 12" 14"16" 18"20" 24" 30"
Carbon Steel 23318 23319 23320 23321 23322 6662 6663 8026 8386
How to Order, Series 125 Cast Iron Flanged Tee
Base
Size
Number
5 2 5 0 X X X
2" 2-1/2" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20"
-008 -010 -012 -016 -020 -024 -032 -040 -048 -056 -064 -072 -080
Flanged Tees for 3- way Butterfly Valve Assemblies
3-way Adapter for Valves Orientation
3-way adapter assemblies mechanically link two butterfly valves,
to close one while opening the other, with a single actuator.
Valves are commonly connected in this manner by assembling to
a flanged tee for diverting service.
3-way adapters for valves may be used with piston, cylinder,
diaphragm, or electric actuators, gear operators or manual handles.
Base Part Orientation Valve Size
Number
X X X X X XX X
Established
at
Order Entry
See
Diagram
2" 1 6" 6
2
1
/2" 2 8" 7
3" 3 10" 8
4" 4 12" 9
5" 5
Base Part Orientation Valve Size
Number
1 4 1 6 5 XX X
See
Diagram
14" 1
16" 2
18" 3
20" 4
Note: Consult factory for 36", 42", 48" valve stem extensions.
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
Pressure Rating
Three drop tight pressure ratings are offered for Demco
Butterfly Valves. Normally, 200 psi shutoff is used in butterfly
applications. However, 285 psi shutoff is optionally available
for higher pressure applications. For smaller actuator sizing, 50
psi valves offer reduced torque.
For minimum torque, throttling valves, which do not pro-
vide drop tight closure, are available.
Vacuum Rating
Demco Butterfly Valves will seal against 10 microns of vacuum
(29.9 inches of mercury). For reduced torque and extended seat
life, 50 psi discs are recommended for the dry service condi-
tions found in many vacuum applications.
End-of-Line Service
Lug body valves may be used in end-of-line service, with
downstream piping removed. (Weld neck or socket flanges,
only, can be used for this service.) Since upstream pressure is
excluded between the flange and the seat face by the exclusive
Demco flange seal, there is no effective force to slide the seat
downstream. Demco Lug Butterfly Valves are recommended
for liquid service up to 200 psi with downstream piping
removed.
Lug body valves are recommended for isolation of pumps,
control devices or other system components which may need
to be removed for repair or replacement. Lug valves are also
suitable for installation at points from which piping expansions
may proceed. Such valves are normally blanked with blind
flanges, to protect the exposed seats, until new piping is
attached.
Marking
Each valve is positively identified by marking and tagging
per MSS SP 25.
Actuation
Positive latch handles, worm gear operators and automatic
actuators are available and totally interchangeable on the
Demco valve.
The Demco top flange is dimensionally compatible with other
competitive butterfly valves. With optional utility top stem, the
Demco valve interchanges directly with competitive valves, allow-
ing valve replacement without the need for new actuation.
Installation and Maintenance
Demco Butterfly Valves are bi-directional, with identical flow-
way from either face. To install, simply close the valve, insert
between flanges and make up with studs or cap screws. No regu-
lar maintenance or lubrication is ever required. Disassembly is
simple, for inspection or replacement of parts. Open the valve,
remove handle or actuator, remove tangential pins, pull out the
stems and push the disc and seat out of the body. Reassemble in
reverse order, with a small amount of general purpose non-hydro-
carbon based lubricant on the outside of stems, seat and disc flats.
Steel or cast iron flanges of either raised or flat-faced type
are suitable for use with Demco Butterfly Valves. Plastic
flanges are subject to damage at installation by over-tightening
the bolting and may deflect or cup, resulting in flange leaks.
Refer proposed plastic flange installations to Demco Valve
Quotations Department for review and recommendation.
Throttling discs, with no seat interference, do not
provide a stem seal. Stem o-rings are provided for this
application. Flange gaskets assist the o-rings in 2"-12"
valves, and must be used with throttling discs, only.
Lug valve connection with downstream flange removed
Wafer valve connection
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
This nomograph gives correspond-
ing values for the parameters of flow
rate, valve size, disc angle and pres-
sure drop of Demco Butterfly Valves
in 1.0 specific gravity water service
at 68F.
The shaded portion of the nomo-
graph represents line velocities
below 15 feet per second and is
normally used for valve sizing in
liquid applications.
Butterfly Valves are economical
throttling devices. Reliable throttling
can be attained at disc openings
from 25 to 70.
Sample Computation for Water
Water, with specific gravity of 1.0
and flow rate of 1200 gpm, through
6" Butterfly Valve. Required:
Pressure drop at full and 75 disc
opening.
Project horizontally from 1200
gpm to 6" valve curve. Project
vertically upward to full open valve
curve, then horizontally to read
0.35 psi pressure drop. Continue
upward projection to intersect 75
opening curve, then horizontally to
read 0.8 psi pressure drop.
Sample Computation for Air
Air, with density of 0.217 lbs./cu. ft.,
flow rate of 40,000 cu. ft./hr., through
5" Butterfly Valve. Required: Pres-
sure drop through full open valve.
Disregarding change in gas con-
dition by pressure drop across valve,
proceed from 40,000 cu. ft./hr., as in
liquid computation, to read 15 psi
pressure drop. Convert pressure
drop from water to air by multiplying
this value times the ratio of air-to-
water densities:
To determine pressure drop for
any fluid, multiply value obtained
from the nomograph by the quotient
of the fluid density, in pounds per
cubic foot, divided by 62.4.
0.217
62.4
15 psi x = 0.052 psi
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
Dimension
Valve Size
2" 2
1
/2" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20"
ASchedule 40 Flange ID
(Except Slip On) 2.07 2.47 3.07 4.03 5.05 6.07 7.98 10.02 12.00 13.25 15.25 17.25 19.25
(Slip On) 2.44 2.94 3.57 4.57 5.66 6.72 8.72 10.88 12.88 14.14 16.16 18.18 20.20
BSeal Diameter 2.65 3.15 3.78 4.78 5.84 7.03 8.96 11.09 13.09 14.14 16.16 18.18 20.20
CRaised Face Diameter 3.62 4.12 5.00 6.18 7.31 8.50 10.62 12.75 15.00 16.25 18.50 21.00 23.00
DValve Body Diameter 4.12 4.87 5.37 6.87 7.75 8.75 11.00 13.37 16.12 17.20 19.27 21.43 23.60
ESeat OD 3.12 3.62 4.25 5.25 6.31 7.46 9.43 11.56 13.56 15.14 17.04 19.06 21.08
Threaded ANSI Socket & Slip On 3
3
/4 4
1
/8 4
1
/4 4
3
/4 5
1
/8 5
3
/8 6
1
/16 6
5
/8 7
5
/8 7
1
/2 9 9
13
/16 10
11
/16
Weld End, Lt. Wt. & ANSI 6
3
/4 7
3
/8 7
3
/8 8
1
/8 9
1
/4 9
1
/4 10
9
/16 10
3
/4 12
1
/4 13 14 15
7
/16 16
5
/16
Grooved 6
5
/8 7
3
/16 7
1
/8 7
7
/8 8
15
/16 8
7
/8 10
3
/16 10
5
/16 11
13
/16
Socket, Lt. Wt. 2
3
/4 2
7
/8 2
7
/8 3
1
/8 3
1
/4 3
1
/4 3
9
/16 4
1
/4 4
3
/4 4
1
/2 5
1
/2 5
15
/16 6
7
/16
GSeat ID 2
1
/4 2
13
/16 3
5
/16 4
3
/16 5
1
/16 6
1
/16 7
15
/16 10 11
15
/16 13
5
/32 15
7
/32 17
5
/32 19
5
/32
HDisc Chord*, Resilient Seated Valves 1.467 2.144 2.743 3.601 4.582 5.624 7.428 9.382 11.35 12.86 14.72 16.61 18.53
ANSI 150 3.25 3.62 3.75 4.00 4.12 4.25 4.81 5.12 5.75 5.75 6.87 7.56 8.31
DEMCO Lt. Wt. 2.75 2.87 2.87 3.12 3.25 3.25 3.56 4.25 4.75 4.50 5.50 5.94 6.43
Resilient Seated-sq. in. 2.33 3.92 5.93 10.01 14.98 22.09 39.43 61.52 89.54 111.2 150.5 186.1 238.1
% Sch. 40 pipe 70% 82% 80% 79% 73% 76% 79% 78% 80% 82% 85% 83% 87%
Number of Studs 4 4 4 8 8 8 8 12 12 12 16 16 20
Number of Cap Screws 8 8 8 16 16 16 16 24 24 24 32 32 40
Size of Studs or Cap Screws-
5
/8"
-
11
5
/8"
-
11
5
/8"
-
11
5
/8"
-
11
3
/4"
-
10
3
/4"
-
10
3
/4"
-
10
7
/8"
-
9
7
/8"
-
9 1"
-
8 1"
-
8 1
1
/8"
-
7 1
1
/8"
-
7
Threads per in.
Length of Studs 5 5
1
/2 5
1
/2 5
3
/4 6
1
/2 6
1
/2 7 7
1
/2 8
1
/4 8
1
/4 10 10
1
/2 11
3
/4
Length of Cap Screws 1
1
/2 1
1
/2 1
1
/2 1
3
/4 1
3
/4 2 2
1
/4 2
1
/4 2
1
/2 2
1
/2 3
1
/4 3
1
/2 4
General Dimensions (inches), 2"20"
DEMCO Butterfly Valves are designed to seal without flange gaskets
against flange faces with inside diameters between slip-on flange
bore and Schedule 40 weld neck flange bore.
*2"12" disc will open into Schedule 80 pipe ID.
F
End-to-
End
JOutside-
to-Outside
Throughput
Area
Dimension
Valve Size
24" 30" 36" 42" 48"
AStandard Flange ID
23.25 29.25 35.25 41.25 47.25
(Except Slip On)
BSeal Diameter 24.25 30.00 35.94 42.97 49.38
CRaised Face Diameter 27.25
DValve Body Diameter 28.23 34.05 40.49
ESeat OD 25.49 31.47 37.63 45.61 52.31
FEnd-to-End Weld End,
18.00 16.75 18.63 21.13 22.31
ANSI
GSeat ID 23
1
/4 29
5
/16 35
5
/16 41
3
/32 47
5
/16
HDisc Chord 22.57 28.67 34.70 40.02 46.15
JOutside-to-Outside,
9.75 10.75 12.63 15.13 16.31
ANSI
Number of Studs 20 * **
Number of Cap Screws 40 56 64
Size of Cap
1
1
/4"
-
7 1
1
/4"
-
7 1
1
/2"
-
6
Screws-Threads per in.
Length of Studs 12
1
/2 * **
Length of Cap Screws 4 4 4
1
/2
sq. m. 352.4 546 800 1079 1447
% std. pipe 88% 81% 82% 81% 83%
General Dimensions (inches), 24" 48"
**24 Studs 1
1
/4-8 13
1
/2; 8 capscrews 1
1
/4-7 4.
**28 Studs 1
1
/2-8 16; 8 capscrews 1
1
/2-6 4
1
/2.
32 Studs 1
1
/2-8 18; 8 capscrews 1
1
/2-6 4.
36 Studs 1
1
/2-8 19
1
/2; 16 capscrews 1
1
/2-6 4
1
/4.
Throughput
Area
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
Sample Computations
What is the flow rate of water at ambient temperature through
a 4" butterfly valve 70 open when pressure drop across the
valve is 0.5 psi? (Density of water at 68F is 62.4 pounds per
cubic foot.)
What is the pressure drop across an 8" butterfly valve fully
open, flowing 2000 gallons per minute of solvent with a density
of 55 pounds per cubic foot?
C
v
values, given above, may be employed in the formula:
Where:
Q = Gallons per minute of flow through the valve.
P = Pounds per square inch pressure drop across the valve.
D = Density of fluids in pounds per cubic foot.
Pressure drop is computed by rearranging the formula to:
DEMCO
(p229)
Valve Size
2" 2
1
/2" 3" 4" 5" 6" 8 10" 12" 14" 16" 18" 20" 24" 30" 36"
90 145 225 325 590 1,125 1,950 3,250 5,000 7500 10,000 13,600 18,000 22,600 30,000 47,000 70,000
80 115 175 260 510 1,000 1,650 2,725 4,300 6,050 8,100 11,500 14,300 18,000 25,000 38,000 60,000
75 95 135 215 410 830 1,350 2,200 3,600 5,000 6,700 9,500 12,100 15,000 21,000 31,500 48,000
70 70 105 160 305 625 1,030 1,750 2,750 4,050 5,100 7,100 9,200 11,500 16,500 25,500 39,500
60 53 83 125 235 490 800 1,300 2,150 3,100 4,100 5,100 7,100 8,700 11,750 18,000 28,000
50 27 42 63 120 250 410 700 1,150 1,600 2,200 2,650 3,700 4,600 6,100 9,700 15,000
40 17 26 38 73 155 250 420 670 1,000 1,300 1,700 2,300 2,800 3,800 6,000 9,200
30 9 15 22 42 88 145 250 390 550 750 900 1,250 1,600 2,200 3,500 5,300
25 6 10 15 28 60 98 170 260 380 500 650 900 1,125 1,500 2,300 3,500
Flow Coefficients (C
v
)
Degree
Open
Water Hammer
Water hammer is a series of shocks in a piping system caused
by rapidly stopping the flow of fluid in that system. Although it
is difficult to measure pressure spikes caused by water hammer
shock with ordinary equipment, maximum obtainable pressures
caused by instantaneous valve closure can be approximated by
the following formula:
Pressure (max) = Interrupted velocity (fps) 58 psi/fps
In other words, pressure increases 58 psi for each foot per
second of interrupted pipe line velocity.
A pipe carrying fluid at 15 feet per second velocity will
have an instantaneous pressure increase of 870 psi under rapid
closure conditions.
The effects of water hammer are seen in a butterfly valve as
bent disc and stems, broken bodies or both.
Water hammer can be minimized or eliminated by slowing
valve closure time in accordance with the following formula:
Where:
Q = Flow in gpm.
S = Upstream pipe size in sq. ft.
P = Pressure rating of the valve in psi.
Generally, a closing time of 6 to 8 seconds is sufficient to
eliminate water hammer.
P x 62.4
D
Q = CV x
Q
2
x D
CV
2
x 62.4
P =
0.14 Q
S (P)
Time seconds =
P x 62.4
D
Q = CV x
0.5 x 62.4
D
= 305 x
= 305 x 0.707
Q = 215.6 gallons per minute
Q
2
x D
CV
2
x 62.4
(2000)
2
x 55
(3250)
2
x 62.4
P =
=
P = 0.33 pounds per square inch
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO
Torque
The torque (turning effort) required to operate a given butter-
fly valve is determined by two factors: friction of disc and seat
due to interference, and dynamic forces of flow through the
valve which tend to open or close the valve. Actuator torque
output must meet or exceed the maximum torque requirement
of the valve.
Normal Wet Opening Torque requirements due to interfer-
ence are tabulated below. Dry service will increase opening
torque significantly. Consult factory for dry service torque
requirements.
The disc of a butterfly valve, in partially opened condition,
is subject to lift forces from passage of fluid over its surfaces.
This effect is analogous to an airplane wing and results in an
unbalanced turning force on the disc. Dynamic torque is pro-
portional to pressure drop through the valve and may become
significant in some applications.
Dynamic torque typically is a maximum at about 70 disc
opening. Under high differential pressure conditions, such
torque may exceed the design strength of stems, connections or
actuators. The curves at right may be used to calculate dynamic
torque for Demco Butterfly Valves and should be consulted in
any case where high differential pressure may occur during
operation of a valve.
Valve Size
2" 2
1
/2" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36"
285 psi Shutoff 225 326 510 765 1190 1530 2550 4125 7000 13150 17500 21500 26600 5000
200 psi Shutoff 132 192 300 450 700 900 1500 2650 4500 7740 10280 12600 15600 30000 50000 67500
50 psi shutoff 108 108 192 264 450 550 1000 1800 3000 4500 6500 8400 10800 20000 30000 50000
Throttling* 72 72 90 108 144 180 350 700 1160 1660 2800 3400 5000 8400
Normal Wet Opening Torque of Resilient Seated Butterfly Valves (In-Lbs)**
Description
**When line velocity exceeds 15 fps, dynamic torque will exceed
tabulated torque for throttling valves.
**Consult factory for dry torques.
14"24": 250 psi shutoff (14"-24": 250PSIconsult factory).
14"24": 150 psi shutoff; 30"36": 150 psi shutoff.
Where:
Example:
What is the maximum pressure drop possible through a butter-
fly valve at 100 PSIG inlet pressure with water at 68F (.339
PSIA vapor pressure)?
Under the above conditions it is possible to take a 40.03 psi
pressure drop across the valve before cavitation will begin.
Cavitation Data
Liquid flow is accelerated as it passes through a valve in such
a manner that pressure is decreased below the vapor pressure
and bubbles form. Immediately downstream of the valve,
velocity decreases while pressure increases and the bubbles
collapse causing noise and possible mechanical damage to the
valve and piping. This is called cavitation. Cavitation can
often be identified by the noise of the collapsing bubbles
which sounds like gravel flowing in the pipe.
Generally butterfly valves operate with high flow capaci-
ties and at low pressure differentials and are not particularly
susceptible to cavitation.
When butterfly valves are used as control valves, one can
assure that cavitation will not occur by applying the following
simplified formula:
Pmax = K
C
( P
1
P
V
)
Pmax = .35 (114.7 .339)
= 40.03 psi
Pmax = Differential pressure across the valve.
K
C
= Cavitation constant
(approximately .35 for butterfly
valves).
P
1
= Inlet pressure (PSIA).
P
V
= Vapor pressure of the flowing liquid
(PSIA).
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
DEMCO S T A N D A R D M A T E R I A L D A T A
Description NE-C
NF-C NF-C NF-C
NE-I NE-D
NE-I
NEI-T
14-24 30 & 36 42 & 48 Sanitary
See page 201 for Assembly Part Number
Ductile Iron
A395 (60-40-18) Lug Lug Wafer/Lug Wafer Wafer Wafer/Lug
ENC Coated Wafer Wafer/Lug
A48 (Class 20) Wafer/Lug Wafer
Gray Iron A48 (Class 30)
A126 (Class B) Wafer Flange
Bronze B148 (952) C/F Wafer/Lug Wafer/Lug Wafer/Lug
Steel A216 (WCB) Lug Wafer/Lug Wafer/Lug
Stainless Steel A351 (CF8M) Wafer/Lug Wafer/Lug Wafer/Lug
Aluminum B179 (ZC-81A) Wafer Wafer Wafer
Bodies
Description NE-C
NF-C NF-C NF-C
NE-I NE-D
NE-I
NEI-T
14-24 30 & 36 42 & 48 Sanitary
Ductile Iron/
A536 (65-45-12)

Nickel Plated
Ductile Iron/
A536 (65-45-12)

SS Edge
Ductile Iron/
A536 (65-45-12)

PVF Coated
Aluminum Bronze
B148 (954)

B148 (955)

316 SS A743 (CF8M)

Monel QQ-N-288

Alloy 20,
A743 (CN-7M)

29 NI-20 Cr
Hastelloy C
A494 (CW-2M)

61 NI-17 Mo-17 Cr
Discs
Description NE-C
NF-C NF-C NF-C
NE-I NE-D
NE-I
NEI-T
14-24 30 & 36 42 & 48 Sanitary
Phosphate
AISI C1213/15

Coated Steel
416 SS QQ-S-764-B

316 SS AMS 5648 B

17-4 PH SS AMS 5643

Monel
B164 (Class A)

Stems
Conforms to USCG Marine requirements as outlined in 46 C.F.R., part 56.
See material trademark on page 226.
Consult factory for special material requirements.
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
(p232)
DEMCO S T A N D A R D M A T E R I A L D A T A
Seats
See pages 210 and 211 for seat material description and part
number scheme for available options for different valve series.
Buna N is a general purpose elastomer compounded for maxi-
mum hydrocarbon or petroleum resistance.
0F to +180F Same as Nitrile, Hycar
1
, NBR
GENERAL SERVICE EPT is recommended for water service.
Resistance to saturated steam to 275F is excellent. EPT is suitable
in alkaline solutions. EPT is not suitable for oil or hydrocarbons.
FOOD GRADE EPT is formulated in compliance with FDA
guidelines published in the Code of Federal Regulations, Title
21, paragraph 177.2600. This material is suitable for food ser-
vice, except milk and edible oils.
Peroxide cured +30F to +275F*
Same as EPDM, Nordel
1
Sulfur cured 30F to +225F
BLACK NEOPRENE complies with FDA guidelines and is
principally recommended for food and beverage service. It is
resistant to vegetable oils, brine and oxygen.
0F to +180F Same as Polychloroprene, CPE
WHITE NEOPRENE offers chemical resistance comparable
to black neoprene but uses fillers other than carbon black to
provide white coloration. Physical properties are not as good as
black neoprene, and white neoprene should be used only when
black cannot be tolerated. Storage should be under low light
conditions to prevent discoloration.
0F to +180F
HYPALON
1
is compounded for chemical resistance and is
excellent in acids and hydrocarbons.
0F to +180F Same as CPE
VITON
1
is excellent at elevated temperatures and also in harsh
chemical environments. Viton is not suitable for hot water or steam.
+20F to +300F Same as Fluoroelastomer
NATURAL RUBBER is generally superior to other elastomers
in abrasion resistance and is recommended for dry material
handling. Use in oils and solvents is not recommended.
30F to +150F
FLUOROSTEAM seats offer heat and chemical resistance to
hydrocarbons and hot water or saturated steam. Maximum tem-
perature capability is dependent on fluid resistance, pressure
and flow rates.
+20F to +275F
ETM30230 is compounded to combine many of the better
media properties of Buna-N, EPT or Neoprene for service in
hydrocarbons, gasoline, solvents, animal oils and vegetable oils
with a wide temperature range (30F to 230F). Abrasion
resistance is equal to Buna-N. Resistance to hydrogen sulfide
and carbon dioxide are superior to Buna-N.
30F to +230F
NEI-T TEFLON
1
SEAT is Buna-N, or EPT elastomer bonded
to a virgin TFE covering providing an inert, aseptic non-stick
surface which is excellent for sanitary food service applications.
0F to +250F
OTHER SEAT ELASTOMERS are available for special
applications. Consult factory.
1
See material trademark on page 226.
* Peroxide cured EPT performs best in this range. The lowest
temperature limitation not yet determined.
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
T E R M S A N D C O N D I T I O N S
(p233) T E R M S A N D C O N D I T I O N S
1. CONTRACT ACCEPTANCE:
Any written or oral purchase order received
from Buyer by Cooper Cameron Corporation,
Cameron Division and Cooper Cameron Valves
(Seller) shall be construed as a written
acceptance of Sellers offer to sell and shall
be filled in accordance with the terms and
conditions of sale set forth herein. SELLERS
ACCEPTANCE OF THIS ORDER IS EXPRESSLY
CONDITIONED ON BUYERS ASSENT TO THE
TERMS CONTAINED HEREIN. The terms and
conditions of Sellers proposal (if any) and
acknowledgement shall prevail over any
conflicting or different terms in Buyers order
unless Buyer notifies Seller in writing of its
objections thereto within fifteen (15) days
from receipt of Sellers acknowledgement.
Buyers standard terms of purchase will not
be considered a counteroffer to Sellers terms
and conditions of sale. The failure of Seller to
object to any provision in conflict herewith
whether contained on Buyers purchase order
or otherwise shall not be construed as a
waiver of the provisions hereof nor as an
acceptance thereof.
2. QUOTATIONS AND PRICES:
All quotations are made for prompt acceptance
and any terms quoted therein are subject to
change without notice after thirty (30) days
from the date quoted unless specifically stated
otherwise on the quotation. Any product,
service capability or manufacturing capability
which may be available at the time a quotation
is made is subject to prior sale. Prices quoted
are valid for thirty (30) days unless specifically
stated otherwise on the quotation and are
subject to change without notice. The price in
effect at the time of shipment including any
escalation formula will apply, unless a valid
quotation or written agreement to the contrary
exists between Buyer and Seller. All prices
shown are in U.S. dollars and are F.O.B. Seller s
shipping point. Any documentation pertaining
to traceability requirements for raw materials
or products or documentation required for any
routine or special processes must be identified
by the Buyer at the time of quotation (if any)
or at the time of order placement.
3. TAXES:
Any tax or other charge imposed by law on
the sale or production of goods or the perfor-
mance of services shall be paid by the Buyer,
unless the law specifically provides that such
payment must be made by Seller, in which case
Buyer shall reimburse Seller for such payment
as part of the purchase price. Custom duties,
consular fees, insurance charges and other
comparable charges will be borne by Buyer.
4. SHIPPING SCHEDULE AND
DELIVERY:
Shipment schedules are given as accurately
as conditions permit and every effort will be
made to make shipments as scheduled. Seller
will not be responsible for deviations in meet-
ing shipping schedules nor for any losses or
damages to Buyer (or any third party) occa-
sioned by deviations in the shipping schedule,
whether due to Acts of God, orders bearing
priority ratings established pursuant to law,
differences with workmen, local labor short-
ages, fire, flood, shortages or failure of raw
materials, supplies, fuel, power or transporta-
tion, breakdown of equipment or any other
causes beyond Sellers reasonable control,
whether of similar or dissimilar nature than
those enumerated. Seller shall have additional
time within which to perform as may be rea-
sonably necessary under the circumstances and
shall have the right to apportion its produc-
tion among its customers in such a manner as
it may consider to be equitable. Seller reserves
the right to furnish commercially equivalent or
better substitutes for materials or to subcon-
tract the Buyers order or portions thereof as
Seller deems necessary. In no event shall Seller
be liable for any consequential damages for
labor resulting from failure or delay in ship-
ment. If Buyer requires drawings, procedures,
standards or similar material for approval,
shipping schedules will be calculated from
the time such approvals are received by Seller,
since shipping schedules are based on Seller
having all required information and a firm
order from Buyer which is enterable into pro-
duction. Any hold points, witness points or the
need for inspection by Buyers representatives
must be identified by Buyer at the time of
quotation (if any) and/or order placement in
order that the effect on the prices or shipping
schedules (if any) can be taken into account.
Additional inspection or testing required by
Buyer which affects normal production
sequence will be considered as extending
the shipping dates accordingly.
5. MINIMUM BILLING:
Seller reserves the right to impose a minimum
billing charge on all sales, change orders or
order supplements.
6. TERMS OF PAYMENT:
Terms of payment for all materials and service
are 30 days from invoice date, at net price,
provided satisfactory credit has been estab-
lished. All unpaid invoices are subject to the
maximum legal interest rate per annum
commencing with the due date.
7. CANCELLATIONS AND RETURNS:
Purchase orders once placed by Buyer and
accepted by Seller can be canceled only with
Sellers written consent and upon terms which
will save Seller from loss. No products may
be returned for credit or adjustment without
written permission from Sellers office autho-
rized to issue such permission.
8. WARRANTIES:
All products of Sellers manufacture are war-
ranted against defects of material and work-
manship for a period of twelve (12) months
from the date of installation or eighteen (18)
months from date of shipment, whichever
period first expires, when such products are
used in the service and within the pressure
range for which they were manufactured. In
the case of products or parts not wholly of
Sellers manufacture, Sellers liability shall be
limited to the extent of its recovery from the
manufacturer of such products or parts under
its liability to Seller.
Any repair work performed by Seller is war-
ranted for one year from completion of such
repairs and applies only to work performed.
If, within these specified periods, Seller
receives notice from Buyer of any alleged
defect in or nonconformance of any product
or repair and if in the Sellers sole judgment
the product or repair does not conform or
is found to be defective in material or work-
manship, then, Buyer shall, at Sellers request,
return the part or product F.O.B. to Sellers
designated plant or service location. Seller,
at its option and expense, shall repair or
replace the defective part or product, or
repay to Buyer the full price paid by Buyer
for such defective part, repair or product.
Any repayment of purchase price shall be
without interest.
Sellers warranty liability, including defects
caused by Sellers negligence, shall be limited
to such repair, replacement or refund, and
shall not include claims for labor costs, expens-
es of Buyer resulting from such defects, recov-
ery under general tort law or strict liability or
for damages resulting from delays, loss of use,
or other direct, indirect, incidental or conse-
quential damages of any kind. Seller will not
be responsible for failures of products which
have been in any way tampered with or
altered by anyone other than an authorized
representative of Seller, failures due to lack of
compliance with recommended maintenance
procedures or products which have been
repaired or altered in such a way (in Sellers
judgment) as to affect the products adversely.
THIS WARRANTY IS EXPRESSLY IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS, STATUTO-
RY OR IMPLIED, INCLUDING THE WARRANTY
OF MERCHANTABILITY AND FITNESS FOR
PARTICULAR PURPOSE WHICH EXCEED THE
FOREGOING WARRANTY.
9. NUCLEAR SALES:
The products sold hereunder are not designed
or manufactured for use in or with any atomic
installation or activity. If the Buyer or ultimate
user of these products intends to use them in
such an installation or activity, Sellers Nuclear
Terms of Sale shall be part of and control this
contract. Seller will furnish Buyer with a copy
of its Nuclear Terms of Sale upon request.
10. PATENT INFRINGEMENT:
Seller warrants that the use or sale of material
or apparatus sold or rented by it to Buyer
hereunder will not infringe United States
patents of others covering such material or
apparatus by itself, and hereby agrees to
indemnify Buyer against judgment for dam-
ages for such infringement of any such patent,
provided that Buyer shall, upon receipt of any
claim for infringement of any such patent or
threat of suit for such infringement or upon
the filing of any suit for infringement,
whichever comes first, promptly notify Seller
in writing and afford Seller full opportunity, at
its option and its own expense, to answer such
claim or threat of suit, assume the control of
the defense of said suit, and settle or compro-
mise same in any way Seller sees fit. Other
than court-awarded judgments as aforesaid
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
(p234)
16. TRANSPORTATION CHARGES,
ALLOWANCES, CLAIMS:
All prices are F.O.B. Sellers plant or other
designated shipping point.
No freight is allowed unless stated in
Sellers quotation (if any) or in a written
contract which may exist between Seller and
Buyer at the time of shipment. If Sellers quo-
tation or a written contract states that all or a
portion of freight is allowed, all prices are
F.O.B. Sellers plant or other designated ship-
ping point, with most economical surface
transportation allowed. If the quoted or con-
tractual price includes transportation, Seller
reserves the right to designate the common
carrier and to ship in the manner it deems
most economical. Added costs due to special
routing requested by the Buyer are chargeable
to the Buyer. Under no circumstances is any
freight allowance which is absorbed by Seller
to be deducted from the selling price. If the
quoted price or contract includes transporta-
tion, no deduction will be made in lieu thereof
whether Buyer accepts shipment at plant,
warehouse, freight station, or otherwise
supplies its own transportation. When sales
are made from the Sellers warehouse, Seller
reserves the right to charge either actual or
pro-rated freight from Sellers principle point
of manufacture to Sellers warehouse. Buyer
assumes risk of loss upon delivery to the carri-
er, regardless of who pays shipping costs.
Seller endeavors to pack or prepare all
shipments so that they will not break, rust or
deteriorate in transit, but does not guarantee
against such damage. Unless requested in
writing by the Buyer, no shipments are insured
by Seller against damage or loss in transit.
Seller will place insurance as nearly as possible
in accordance with Buyers written instructions
but in such case Seller acts only as agent
between the insurance company and the
Buyer and assumes no liability whatsoever.
Any claims for shipping loss, breakage or
damage (obvious or concealed) are Buyers
responsibility and should be made to the
carrier. All claims regarding shortages must be
made within thirty (30) days from receipt of
shipment and must be accompanied by the
packing list(s) covering the shipment.
17. CONSULAR INVOICES:
Consular fees for legalizing invoices, stamping
bills of lading, or other documents required
by the laws of any country or destination are
not included in quotations or selling prices. If
instructed in writing, Seller will make arrange-
ments for consular documents and declarations
as agent of the Buyer, but Seller assumes no
liability whatsoever as a result of making such
arrangements. Seller assumes no responsibility
for any fines or other charges imposed due to
errors or incorrect declarations.
18. INDEMNIFICATION AND
LIMITATION OF LIABILITY:
A. INDEMNIFICATION:
Seller agrees to indemnify Buyer and hold
Buyer harmless against any claims, demands
or causes of action for property damage or
personal injury (including death) caused by
the negligent act or omission of any employ-
ee, agent or subcontractor of Seller and not
contributed to by the negligence of Buyer,
its employees, its agents or any third party.
Seller shall not be responsible for the acts and
workmanship of employees, agents, contractors
or subcontractors of Buyer or any third party,
nor for failure or malfunction of any tools,
materials, equipment, products, supplies,
facilities or devices not manufactured and
supplied by Seller. Buyer agrees to hold Seller
harmless from any and all losses, claims, or
damages arising from subsurface damage,
surface damage caused by subsurface damage,
loss of hydrocarbons and from pollution,
regardless of whether such damages, losses or
claims were caused by the negligence or sole
negligence of Seller, it being the intent of the
parties that this indemnity shall apply to prop-
erty of Buyer or to that of any third party.
B. LIMITATION OF LIABILITY:
UNDER NO CIRCUMSTANCES SHALL SELLER BE
LIABLE FOR ANY SPECIAL, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, INCLUDING, BUT NOT
LIMITED TO LOSS OF ANTICIPATED PROFITS,
LOSS OF USE OF EQUIPMENT OR OF ANY
INSTALLATION, SYSTEM OR FACILITY INTO
WHICH SELLERS EQUIPMENT MAY BE LOCAT-
ED OR AT WHICH SELLER, ITS AGENT OR SUB-
CONTRACTOR MAY BE PERFORMING WORK.
Sellers total responsibility for any claims,
damages, losses or liabilities arising out of or
related to its performance of this contract or
the products or services covered hereunder
shall not exceed the purchase price.
19. MODIFICATION, RESCISSION
& WAIVER:
The terms herein may not be modified or
rescinded nor any of its provisions waived
unless such modification, rescission or waiver
is in writing and signed by an authorized
employee of Seller at its office in Houston,
Texas.
Failure of Seller to insist in any one or
more instances upon the performance of any
of the terms and conditions of the contract or
the failure of Seller to exercise any of its rights
hereunder shall not be construed as a waiver
or relinquishment of any such term, condition,
or right hereunder and shall not affect Sellers
right to insist upon strict performance and
compliance with regard to any unexecuted
portions of this contract or future perfor-
mance of these terms and conditions.
All orders must be accepted by an
authorized employee of Seller. The rights
and duties of the parties and construction
and effect of all provisions hereof shall be
governed by and construed according to the
internal laws of the State of Texas. Any disputes
which arise under this agreement shall be
venued in the District Court of Harris County,
Texas or in the Southern District of Texas.
Seller shall not be liable for any delays, loss of
use or for other direct, indirect, incidental or
consequential damages incurred by reason of
any such judgment. Seller does not warrant
that such material or apparatus (a) will not
infringe any such patent when not manufac-
tured by or for Seller or when specially made
in whole or in part to the Buyers design speci-
fication and such infringement arises from
the inclusion of such specified design or (b),
if used or sold in combination with other
material or apparatus, or if used in the
practice of a process, will not, as a result of
such combination or use, infringe any patent
covering such combination or process; and
Seller shall not be liable for and does not
indemnify Buyer for damages or losses of any
nature whatsoever resulting from actual or
alleged patent infringement arising pursuant
to (a) or (b) above.
11. SELLERS RIGHT TO
MANUFACTURE:
Seller in its sole discretion shall have the right
to manufacture the products provided hereun-
der as far in advance of its estimated shipping
schedule as it deems appropriate. Seller
expressly reserves the right to change or modi-
fy the design and construction of any product
in due course of Sellers manufacturing proce-
dure without incurring any obligation or liabil-
ity to furnish or install such changes, modifica-
tions or improvements to products previously
or subsequently sold.
12. ENGINEERING AND SERVICE:
Upon request, Seller will provide engineering
and/or technical information regarding its
products and their uses and, if feasible, will
provide personnel to assist Buyer in effecting
field installations and/or field service. Any such
information, service or assistance so provided,
whether with or without charge, shall be
advisory only. In that regard, neither Seller
nor Buyer assumes any liability for the acts or
omissions of the other party except as may be
provided in these terms.
13. LABOR STANDARDS:
Seller hereby certifies that these products were
produced in accordance with all applicable
requirements of Section 6, 7 and 12 of the
Fair Labor Standards Act as amended and of
regulations and orders of the United States
Department of Labor issued under Section 14
thereof.
14. INSPECTION:
Unless otherwise agreed in writing, final
inspection and acceptance of products must
be made at Sellers plant or other shipping or
receiving point designated by Seller and shall
be conclusive except as regards latent defects.
Buyers representatives may inspect at the
Sellers plant or shipping point during working
hours prior to shipment in such manner as will
not interfere with operations.
15. TITLE:
Title to the products sold hereunder passes
to Buyer upon payment of the full purchase
price.
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
T R A D E M A R K I N F O R M A T I O N
(p235) T R A D E M A R K I N F O R M A T I O N
References in this catalog to registered trademarks or product
designations, which are owned by Cooper Cameron Corporation
are as follows:
Cameron
Demco
DynaCentric
DynaSeal
Foster
Pow-R-Seal
Saf-T-Seal
Thornhill Craver
Unibolt
W-K-M
References in this catalog to registered trademarks or product

designations, which are not owned by Cooper Cameron
Corporation are as follows:
Celcon Hoechst Celanese Corporation
Delrin E. I. Dupont De Nemours & Company
Fluorel Minnesota Mining and Manufacturing Company
Hastelloy Haynes International, Inc.
Hycar Hydrocarbon Chemical and Rubber Company
Hydrin Zeon Chemicals USA, Inc.
Hypalon E. I. Dupont De Nemours & Company
Inconel INCO Nickel Sales, Inc.
Monel INCO Alloys International, Inc.
Nordel E. I. Dupont De Nemours & Company
Stellite Stoody Deloro Stellite, Inc.
Teflon E. I. Dupont De Nemours & Company
Viton E. I. Dupont De Nemours & Company
CONTENTS MENU
TECHNICAL DATA
CONTACT
www:
PRINT
CONTACT
HELP
1 2 3 4 5
This button allows you to print
single or multiple pages
to your printer
This button takes you to
the ccvalve.com
Web Site
the technical data
contents menu
This button takes you to the
main contents menu
telephone and e-mail contact
numbers
Interactive + Help Sections
go to start
page
previous
page
next
page
go to end
page
back one
step
forward
one step
search &
find
full page
and closeup
options
clicking here will take to the
technical specifications indicated
clicking within this box will
enlarge this area for easier
viewing
This interactive
button allows you to
view the video within
that introduction
page
Selecting an item
from the contents
will take you to the
relevant page
Clicking on the pictures will take you to the rel-
evant associated text and vice versa.

Catalog

Uploaded by

Copyright:

Available Formats

Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalog

Uploaded by

Copyright:

Available Formats

What are some of the valve products discussed in the document?

What are some of the valve products discussed in the document?

What warranty does Cooper Cameron offer with their valves?

What warranty does Cooper Cameron offer with their valves?

1999

370CT ball valves

3 7 0 D 4 2 " - 6 " X 4 " T R U N N I O N B A L L VA L V E S

3 7 0 D 4 2 " - 6 " X 4 " T R U N N I O N B A L L VA L V E S

370E4 is a top entry

310C 2-piece oating

310C 3-piece oating

210F oating ball

BWE 150 FL 300 FL

external trim. Good for -50F.

TFE For use in high pressure applications. Temperature limited to 225F.

are registered trademarks of E. I. Dupont de Nemours & Company

Repair Kit for Lower Element

Gasket F/TC-575 Bean Insert 90508-002

Supplied with beanspart # listed for replacement orders.

Not included with bean insert.

Not included with beansorder separately for 2000lb.

Available for Butt-Weld to 6" XX Heavy Only

4" 93 98 176 140 230 162

320 140 200 162

5" 208 317 317

Gate Valves are hydrostatically tested at assembly.

Gate Valves are designed for the maximum working

Hard Chrome Plated on FO2, MO1 and MO3.

Electroless Nickel Plated.

References in this catalog to registered trademarks or product

You might also like