220TW9FB 00
220TW9FB 00
220TW9FB 00
Service
Service
Service
Description Page Description Page
SAFETY NOTICE
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE
CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN
SERVICING ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES.
CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING
Table Of Contents.........................................1
Revision List.........................................2
Important Safety Notice.................................3
1. Technical Specifications..................................5
2. TV Monitor Description.....................6
3. Operation instructions.........................7
3.1 Control buttons...7
3.2 Connection View8
3.3 Remote Control Overview.9
3.4 OSD Menu.10
4. Input/Output Specification..........................19
4.1 Input Signal Connector.............................19
4.2 Factory Preset Display Modes...............................20
4.3 Pixel Defect Policy21
4.4 Failure Mode Of Panel 22
5. Block Diagram................23
5.1 Main Board...........23
5.2 Power Board.24
6. Schematic Diagram....................................25
6.1 Main Board....25
312278518100
GB
REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES
Copyright 2008 Philips Consumer Lifestyle Subject to modification
K
Aug 1, 2008
220TW9FB/00
220TW9FB/19
6.2 Power Board..44
6.3 Key Board...46
6.4 IR Board...47
7. PCB Layout.....48
7.1 Main Board ...48
7.2 Power Board ...............50
7.3 Key Board...53
7.4 IR Board...54
8. Wiring Diagram...55
9. Scalar Board Overview.....56
10. Mechanical Instructions......57
11. Repair Flow Chart..61
12. ISP Instructions.............................67
13. DDC Instructions.................73
14. White Balance, Luminance Adjustment...........86
15. Monitor Exploded View...........89
16. Recommended & Spare Parts List...................90
17. Different Parts List...................92
18. Engineer Specification 93
HUDSON 9 2
Revision List
Version Release Date Revision History
A00 Aug 1, 2008 Initial release, Draft Version
A01 Nov 28,2008 Add CTV Model 220TW9FB/19
HUDSON 9 4
HUDSON 9 5
1. Technical Specifications
HUDSON 9 6
2. TV Monitor Description
The TV monitor will contain a power main board, a main board, a key board and IR board which house the flat
panel control logic, brightness control logic and DDC.
The power board will provide AC to DC Inverter voltage to drive the backlight of panel and the main board chips
each voltage.
Monitor Block Diagram
AC-IN
100V-240V
Power board
(Include: adapter, inverter)
Flat Panel and
CCFL backlight
Main Board
HDMI
CVBS
D-SUB
S-Video
TUNER
Audio Jack
Component
CCFL Drive.
Video signal, DDC
Key Board IR Board
HOST Computer
HUDSON 9 7
3. Operating Instructions
3.1 Control Buttons
HUDSON 9 8
3.2 Connection overview
HUDSON 9 9
3.3 Remote Control Overview
1. Switches the TV Monitor on from
standby or back to standby.
2. Selects connected devices.
3. Selects a picture format.
4. Activates or deactivates
subtitles.
5. Color Keys Selects tasks or teletext pages.
6. Displays programme information, if
available.
7. Accesses the menu or
activates a setting.
8. Navigate the menu.
9. Activates the
menu.
10. Switches to the next or previous
channel.
11. Number keys Selects a channel, page or
setting.
12. Returns to the previously-viewed
channel.
13. Cancels digital text or
interactive services (UK only).
14. Mutes or restores sound.
Program up or down
15. Increases or decreases
volume.
16. Toggles the
menu on or off.
17.
18. Toggles the Electronic
Programme Guide on or off. Only active
with digital channels.
19. Not Supported.
20. Toggles teletxt on or off.
21. Splits the current channel or source
on the left of the screen. Teletext appears
on the right.
HUDSON 9 10
3.4 OSD Menu
HUDSON 9 11
HUDSON 9 12
HUDSON 9 13
HUDSON 9 14
HUDSON 9 15
HUDSON 9 16
HUDSON 9 17
HUDSON 9 18
HUDSON 9 19
4. Input/ Output Specification
4.1 Input Signal Connector
Analog Connector
Pin No. Description Pin No. Description
1. Red Video 9. VGA Power
2. Green Video 10. Sync Ground
3. Blue Video 11. Rx
4. Tx 12. Serial Data for DDC
5. GND 13. H-Sync.
6. Red Ground 14. V-Sync.
7. Green Ground 15. Serial Clock for DDC
8. Blue Ground
VGA connector layout
HUDSON 9 20
4.2 Factory Preset Display Modes
Sync Polarity
Presence
Screen Mode
Dots Lines
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Horizontal Vertical Horizontal Vertical
Normal
(4:3)
FULL
(16:9)
720x400 31.469 70.087
NEG POS YES YES YES YES
640x480 31.469 59.94
NEG NEG YES YES YES YES
640x480 35 67
NEG NEG YES YES YES YES
640x480 37.861 72.809
NEG NEG YES YES YES YES
640x480 37.5 75
NEG NEG YES YES YES YES
800x600 37.879 60.317
POS POS YES YES YES YES
800x600 48.077 72.188
POS POS YES YES YES YES
800x600 46.875 75
POS POS YES YES YES YES
1024x768 48.363 60.004
NEG NEG YES YES YES YES
1024x768 56.476 70.069
NEG NEG YES YES YES YES
1024x768 60.023 75.029
POS POS YES YES YES YES
1152x864 63.851 70.012
POS POS YES YES YES YES
1152x870 68.7 75
NEG NEG YES YES YES YES
1280x960 60 60
POS POS YES YES YES YES
1280x960 75 75
NEG POS YES YES YES YES
1280x1024 63.981 60.02
POS POS YES YES YES YES
1680x1050 65.29 59.954
NEG POS YES YES YES YES
HUDSON 9 21
4.3 Pixel Defect Policy
HUDSON 9 22
4.4 Failure Mode Of Panel
43 K
!
NC
NC
!
NC
NC
!
!
!
!
NC
POWER
FG
FG
DIM
ON/OFF
FG
C903
0.47UF
R927
3K6 1/8W
C904
0.1UF 275V
R914
0.39OHM2W
R907
10R 1/8W
+ C908
22uF/50V
FB901
Jumper
1
2
C912
0.022uF/25V
C923
470pF/25V
Q901
STP10NK70ZFP
SG902
SPARK GAP
R931
NC
-
+ BD901
GBU408
2
1
3
4
HS3
HEAT SINK(D906)
1
2
C924
220pF
C925
NC
R929
43K OHM 1% 1/8W
ZD901
NC
R941
100K OHM 1% 1/8W
D906
YG906C2RSC
1
2
3
+
C917
1000uF25V
Q903
PMBS3904
R922
200 OHM 1/8W
R906
1K 1/4W
R919
100 OHM 1/4W
C919
0.1uF50V
R905
8.2K OHM 1/4W
R903
100 OHM 1/4W
C900
0.001uF/250V
ZD903
P6KE440A
1
2
C921
0.001uF
F901
FUSE
D904
SP10100
1
2
3
R930
2.43K OHM 1% 1/8W
T901
POWER X'FMR
6
8
5
4
2
3
11
10
12
9
7
IC902
AZ431AZ-AE1
+ C914
NC
+
C918
1000uF25V
L904
3.5uH
F902
FUSE
HS1
HEAT SINK(Q901)
1
2
R935
100 OHM 1/4W
C906
2200pF/2KV
R909
3.3 OHM 1/4W
R908
100KOMH 2W
C902
0.001uF
R902
620K OHM 1/4W
R940
150OHM2W
F903
FUSE
C901
0.001uF
ZD902
RLZ5.1B
D910
NC IC903
PC123X2YFZOF
1
2
4
3
R943
470R 1/8W
C932
1000pF
R934
100 OHM 1/4W
C907
0.001uF/250V
R900
620K OHM 1/4W
ZD920
RLZ18B
1
2
L903
3.5uH
D902
FR103
CN902
CONN
1
2
3
4
5
6
7
8
9
10
11
C916
0.1uF
R925
150R 1/8W
D901
FR107
R904
8.2K OHM 1/4W
D909
LL4148
HS2
HEAT SINK (D904)
1
2
+
C915
470uF/16V
CN901
SOCKET
1 2
3
R901
620K OHM 1/4W
R920
100 OHM 1/4W
SG901
SPARK GAP
R937
150R 1/8W
+ C905
120uF450V
C931
0.001uF/250V
C927
0.1uF
R924
1K 1/8W 5%
R912
10R 1/8W
C929
0.001uF
R918
100 OHM 1/4W
+
C922
470uF25V
R936
1K 1/4W
RV901
Varistor
NR901
NTCR
C920
0.1uF
+
C930
680uF 10V
R928
0R05 1/8W
IC901
LD7575A PS
1
2
3
4 5
6
7
8
RT
COMP
CS
GNDOUT
VCC
NC
HV
L902
L
1 4
2 3
R938
10K 1/8W
+16V
+5V
+5V
+16V
HUDSON 9 45
1
1
2
2
3
3
4
4
5
5
A A
B B
C C
D D
LV1
LV2
LV4
LV3
LV1
LV3
LV2
LV4
+5V
ON/OFF
+16V
DIM
CT
SST
CT
SST
INVERTER
CN801 A4 CN802 A4
CN803 C4 CN804 C4
C801 B2 C802 B2
C803 C1 C804 C1
C805 C1 C806 B1
C807 C2 C808 C2
C809 C2 C810 C3
C811 B3 C812 B3
C813 D2 C814 D2
C815 D2 C816 A4
C817 B4 C818 B4
C819 A4 C820 A4
C821 C4 C822 C4
C823 D4 C824 B4
D801 A2 D802 A2
D803 B2 D804 B2
D805 D2 D806 C3
D807 C3 D808 C3
D809 D4 IC801 B2
L801 A4 L802 B4
PT801 A3 PT802 A3
Q802 D2 Q803 D2
Q804 D4 Q805 A3
Q806 B3 R802 B1
R803 B2 R804 B2
R805 A2 R806 A2
R807 B2 R808 B2
R813 B1 R814 B1
R815 C1 R816 C1
R817 C1 R818 B1
R819 C1 R820 B2
R821 B2 R822 B2
R823 D2 R824 D2
R825 C2 R826 D2
R827 B4 R828 B3
R829 B3 R830 B3
R836 B4 R837 C4
R838 C4 R839 C4
R840 C4 R841 C4
R842 D3 R843 D3
R844 D3 R845 D3
R846 C4 R847 C4
R848 D4 R849 D4
ZD802 B2 ZD803 B2
R802
22R 1/8W
R802
22R 1/8W
C801
0.047uF
C801
0.047uF
R841 1M 1/10W 5% R841 1M 1/10W 5%
5
9 1
8
2
6
PT801
POWER X'FMR
PT801
POWER X'FMR
R844
10K 1/10W 5%
R844
10K 1/10W 5%
C824
22pF 5% SL 6KV
C824
22pF 5% SL 6KV
6
2
9
5
1
8
PT802
POWER X'FMR
PT802
POWER X'FMR
R845
10K 1/10W 5%
R845
10K 1/10W 5%
R820
10K 1/10W 5%
R820
10K 1/10W 5%
R821
1M 1/10W 5%
R821
1M 1/10W 5%
1
2
CN802
CONN
CN802
CONN
D803 D803
R847
NC
R847
NC
C823
NC
C823
NC
S
1
G
2
S
3
G
4
D
8
D
7
D
6
D
5
Q806
AM4502C-T1-PF
Q806
AM4502C-T1-PF
R815
NC
R815
NC
Q802
RK7002
Q802
RK7002
C821
68pF3KV
C821
68pF3KV
1
2
CN801
CONN
CN801
CONN
C806
1uF/16V
C806
1uF/16V
C803
NC
C803
NC 1
2
CN804
CONN
CN804
CONN
C808
180K 1/10W
C808
180K 1/10W
1
2
ZD802
RLZ5.6B
ZD802
RLZ5.6B
R830
NC
R830
NC
C815
0.047uF
C815
0.047uF
R842
10K 1/10W 5%
R842
10K 1/10W 5%
R813
470K 1/10W 5%
R813
470K 1/10W 5%
1
2 3
4
L802
Line Filter
L802
Line Filter
1
2
CN803
CONN
CN803
CONN
C810
0.047uF
C810
0.047uF
C820
68pF3KV
C820
68pF3KV
R803
5K1 1/10W
R803
5K1 1/10W
R837
8K2 1/10W
R837
8K2 1/10W
1
2 3
4
L801
Line Filter
L801
Line Filter
C816
22pF 5% SL 6KV
C816
22pF 5% SL 6KV
R828
6.2M OHM 1/2W
R828
6.2M OHM 1/2W
R805
100R 1/10W 5%
R805
100R 1/10W 5%
R846
0R05 1/10W 5%
R846
0R05 1/10W 5%
S
1
G
2
S
3
G
4
D
8
D
7
D
6
D
5
Q805
AM4502C-T1-PF
Q805
AM4502C-T1-PF
3
1 2
D809
BAV99
D809
BAV99
C809
560pF50V
C809
560pF50V
R849
0R05 1/10W 5%
R849
0R05 1/10W 5%
1
2
ZD803
RLZ5.6B
ZD803
RLZ5.6B
+
C812
1000uF 25V
+
C812
1000uF 25V
R822
20K OHM 1% 1/8W
R822
20K OHM 1% 1/8W
R807 100R 1/10W 5% R807 100R 1/10W 5%
R839 1M 1/10W 5% R839 1M 1/10W 5%
C802
0.047uF
C802
0.047uF
C805
0.01uF
C805
0.01uF
D802 D802
C819
68pF3KV
C819
68pF3KV
3
1
2
D808
BAV70
D808
BAV70
R804 5K1 1/10W R804 5K1 1/10W
R829
6K8 1/8W
R829
6K8 1/8W
R843
10K 1/10W 5%
R843
10K 1/10W 5%
C818
220pF
C818
220pF
R823
470 OHM 1% 1/10W
R823
470 OHM 1% 1/10W
D805 D805
R848
NC
R848
NC
R840 1M 1/10W 5% R840 1M 1/10W 5%
C822
68pF3KV
C822
68pF3KV
C817
2PF6KV
C817
2PF6KV
3
1
2
D807
BAV70
D807
BAV70
D801 D801
R816
10K 1/10W 5%
R816
10K 1/10W 5%
R827
NC
R827
NC
R817
1M 1/10W 5%
R817
1M 1/10W 5%
R825
510R 1/10W
R825
510R 1/10W
R826
1M 1/10W 5%
R826
1M 1/10W 5%
R819
100K 1/10W 5%
R819
100K 1/10W 5%
R818
75K 1/10W
R818
75K 1/10W
R814
NC
R814
NC
DRV1
1
VDDA
2
TIMER
3
DIM
4
ISEN
5
VSEN
6
OVPT
7
NC1
8
NC2
9
ENA
10
LCT
11
SSTCMP
12
CT
13
GNDA
14
DRV2
15
PGND
16
IC801
OZ9938GN
IC801
OZ9938GN
R838 1M 1/10W 5% R838 1M 1/10W 5%
R836
51K 1/10W 5%
R836
51K 1/10W 5%
C811
0.1uF
C811
0.1uF
C814
390P 50V
C814
390P 50V
R808 100R 1/10W 5% R808 100R 1/10W 5%
C804
2.2uF/16V
C804
2.2uF/16V
R824
6.2K OHM 1% 1/10W
R824
6.2K OHM 1% 1/10W
C813
0.033uF
C813
0.033uF
3
1
2
D806
BAV70
D806
BAV70
Q803
RK7002
Q803
RK7002
D804 D804
Q804
NC
Q804
NC
C807
0.01uF
C807
0.01uF
R806 100R 1/10W 5% R806 100R 1/10W 5%
HUDSON 9 46
6.3 Key Board
715T2860 1PHI
1
1
2
2
3
3
4
4
5
5
A A
B B
C C
D D
KEY1
KEY1
KEY2
KEY2
+3V3SB
+3V3SB
+3V3SB
+3V3SB
SW101
Power
SW104
Menu
SW105
Vol-
SW106
Vol+
SW102
Pro-
SW103
Pro+
CN101 A1
C101 B3
C102 A2
C103 C2
R101 A5
R102 A3
R103 A3
R104 A4
R105 A4
R106 B2
R107 B1
R108 B3
R109 B2
SW101 A4
SW102 A4
SW103 A4
SW104 A3
SW105 C3
SW106 C2
ZD101 C2
ZD102 B3
ZD103 A2
KEYPAD
R108
1.0K OHM +-1% 1/4W
R108
1.0K OHM +-1% 1/4W
R105
2.0K OHM +-1% 1/4W
R105
2.0K OHM +-1% 1/4W
2 1
3 4
5
SW102
SW
SW102
SW
C102
10uF/6.3V
C102
10uF/6.3V
1
2
ZD102
NC\MLL5232B 5.6V
ZD102
NC\MLL5232B 5.6V
R104
2.0K OHM +-1% 1/4W
R104
2.0K OHM +-1% 1/4W
2 1
3 4
5
SW103
SW
SW103
SW
2 1
3 4
5
SW104
SW
SW104
SW
R101
1.0K OHM +-1% 1/4W
R101
1.0K OHM +-1% 1/4W
R102
0 OHM 1/4W
R102
0 OHM 1/4W
R103
2.0K OHM +-1% 1/4W
R103
2.0K OHM +-1% 1/4W
R106
2.0K OHM +-1% 1/4W
R106
2.0K OHM +-1% 1/4W
R109
2.0K OHM +-1% 1/4W
R109
2.0K OHM +-1% 1/4W
C101
0.1uF/16V
C101
0.1uF/16V
1
2
ZD103
NC/MLL5232B 5.6V
ZD103
NC/MLL5232B 5.6V
2 1
3 4
5
SW106
SW
SW106
SW
R107
2.0K OHM +-1% 1/4W
R107
2.0K OHM +-1% 1/4W
2 1
3 4
5
SW101
SW
SW101
SW
C103
0.1uF/16V
C103
0.1uF/16V
1
2
3
4
5
CN101
CONN
CN101
CONN
2 1
3 4
5
SW105
SW
SW105
SW
1
2
ZD101
NC/MLL5232B 5.6V
ZD101
NC/MLL5232B 5.6V
HUDSON 9 47
6.4 IR Board
715T2859 1PHI
1
1
2
2
3
3
4
4
5
5
A A
B B
C C
D D
STANDBY and TRUN_ON
H = OPEN = DRAK
L = GND = LIGHT
CN1 B2
C1 B3
C2 B4
LED1 B4
LED3 B4
R1 B2
R2 B2
R3 B3
R4 B4
R7 B3
R8 B3
U1 B4
SCHEMATIC1:02.LED&IR
+3.3V_SUB
STANDBY
TURN_ON
+3.3V_SUB +3.3V_SUB
LED1 LED
1 2
C2
1uF/10V
R3 10K OHM 1/10W
C1
100pF/50V
R4
0 OHM 1/4W
CN1
CONN
1
2
3
4
5
6
U1
KSM-2002TM2E
1
2
3
OUT
GND
VCC
R1
4.7K OHM 1/10W
R8
2.7K OHM 1/10W
LED3 LED
1 2
R7
2.7K OHM 1/10W
R2
4.7K OHM 1/10W
HUDSON 9 48
7. PCB Layout
7.1 Main Board
715T2848 H
HUDSON 9 49
C101 C2 C181 C3 C457 B1 C635 A3 C723 B4 C902 B1 D403 D1 L401 B3 R145 C3 R207 C2 R418 A2 R489 D1 R634 B3 R768 C4 RN406 B2 U903 A2
C102 C2 C182 C3 C458 B1 C636 B3 C724 B4 C904 C1 D501 D2 L501 C1 R146 C2 R209 D2 R419 A2 R491 B2 R636 B3 R769 C4 RN407 B1 U904 A2
C103 C2 C183 D3 C459 B1 C638 A3 C725 B4 C910 A1 D502 D2 L502 C2 R147 D3 R210 D2 R420 C1 R495 C1 R637 A3 R770 C4 RN408 B2 U905 A1
C104 C3 C185 D3 C460 B1 C640 A3 C726 B4 C911 A2 D503 D2 L503 C2 R148 D3 R211 D2 R427 D1 R496 B2 R638 A3 R771 C4 RN409 B2 U906 A2
C105 C3 C186 C2 C461 B1 C643 A3 C727 B4 C913 A2 D505 D2 L504 C2 R149 C2 R218 C3 R428 D1 R501 D1 R641 A3 R772 C4 RN410 B2 U907 C4
C106 C2 C187 C2 C462 B1 C644 A3 C729 B4 C914 A2 D508 D5 L505 C2 R150 C2 R219 C3 R430 B1 R502 C1 R642 A3 R773 C3 RN411 B2 U908 A2
C107 C2 C188 C2 C463 B1 C645 A3 C731 B4 C925 A3 D509 D5 L506 D5 R151 D3 R220 C3 R431 B1 R504 D1 R643 B3 R775 C3 RN412 B2 U909 C1
C108 C3 C189 C2 C465 B1 C647 A3 C732 B4 C926 C4 D602 A3 L507 D5 R152 C3 R221 C3 R432 B2 R507 D1 R645 B3 R776 C3 RN413 B2 U910 C1
C109 C2 C190 C2 C466 B1 C648 B3 C734 B5 C928 A1 D603 A4 L508 D5 R153 C2 R222 C3 R433 B2 R508 D1 R650 A3 R777 C3 RN414 B1 U911 B4
C111 C3 C191 C2 C467 B2 C649 A3 C735 B4 C934 A2 D604 A3 L509 D5 R154 C3 R223 C3 R434 B1 R511 D1 R652 A3 R778 C3 RN415 B2 Y401 B3
C113 D4 C192 C2 C471 B1 C650 A3 C738 C4 C935 A2 D605 A4 L601 A4 R156 C2 R224 C3 R435 B2 R512 C1 R653 A3 R779 C4 RN416 B2 Y402 C1
C114 C3 C193 C2 C472 B3 C651 A3 C739 C4 C936 C2 D606 B4 L602 A4 R159 B3 R225 C3 R436 B1 R513 D2 R654 A3 R780 C4 RN417 B1 Y701 C4
C115 D4 C194 C2 C473 B2 C652 A3 C742 C4 C938 A2 D7901 A1 L901 A2 R160 B3 R226 C5 R437 B2 R514 D2 R655 A3 R781 C4 RN418 B2 Y702 B4
C116 C3 C195 C2 C474 A2 C653 A3 C744 C4 C939 A2 D7904 A2 L902 A1 R162 D5 R227 C5 R438 B1 R515 D2 R656 A3 R782 B4 RN419 B1 ZD101 D3
C117 B2 C196 C2 C487 B2 C654 B3 C747 C4 C940 A2 D903 A1 L903 A2 R163 C3 R228 C5 R439 B2 R516 D2 R657 A3 R783 B4 SEN1 D1 ZD105 C3
C118 B2 C198 D3 C488 C1 C655 A3 C753 C4 C941 A2 FB103 B3 Q102 C2 R164 D5 R229 C5 R440 B2 R519 D5 R658 A3 R784 B4 SEN2 A1 ZD106 D3
C119 C3 C199 D3 C489 B3 C656 A3 C756 C4 C942 C1 FB104 B3 Q401 C1 R165 C2 R230 C5 R441 B1 R520 D5 R659 A3 R785 B4 SEN3 A5 ZD107 D3
C120 C3 C200 C5 C490 B3 C657 A3 C757 C4 C943 C1 FB105 B3 Q402 C1 R166 D5 R231 C5 R442 B2 R521 D2 R660 A3 R786 B4 SEN4 D5 ZD108 C3
C122 C3 C201 C5 C492 C1 C658 A3 C758 C4 C944 C1 FB106 B3 Q403 C1 R167 C3 R232 C5 R443 B1 R522 D2 R661 A3 R787 B4 SEN5 C3 ZD111 D5
C131 B3 C202 C5 C493 D1 C660 A4 C760 C4 C946 C1 FB303 B2 Q404 C2 R168 D5 R233 C5 R445 C1 R523 D5 R662 A3 R788 B4 SEN7 D5 ZD112 D5
C132 B3 C203 C5 C495 B2 C661 A4 C762 C4 C948 C1 FB402 D1 Q405 D1 R169 C5 R234 D4 R446 B3 R524 D5 R663 A3 R789 B4 SET1 B3 ZD113 D5
C135 C3 C204 D4 C496 D1 C662 A4 C763 C4 C949 C1 FB601 B3 Q406 C1 R170 C5 R235 D4 R447 C2 R526 D5 R664 A3 R790 C4 SET10 B1 ZD114 C5
C136 C3 C205 D4 C497 D1 C663 A4 C764 C4 C950 C1 FB603 A3 Q407 C1 R171 C5 R236 D4 R449 C1 R527 D5 R665 A3 R7902 A1 SET2 B1 ZD115 C5
C139 C3 C206 D4 C501 B2 C664 A4 C765 C4 C951 B2 FB604 A3 Q408 C1 R172 C3 R237 D4 R450 C1 R530 D5 R666 A3 R7904 B1 SET3 C1 ZD116 D2
C141 C2 C207 D4 C510 C2 C665 A4 C767 B4 C952 B1 FB607 B5 Q505 D2 R173 C5 R238 D4 R451 D1 R535 C2 R667 A3 R7905 B1 SET4 C3 ZD117 D2
C142 D3 C305 A2 C522 C1 C666 A4 C768 C4 C953 C4 FB608 B5 Q506 D5 R174 C5 R239 D4 R452 D1 R536 C2 R669 A4 R7907 B1 SET8 A5 ZD118 D2
C143 C2 C308 B2 C525 C2 C667 A4 C770 C4 C954 C4 FB609 A5 Q601 A3 R175 D3 R240 D4 R453 D1 R539 D2 R670 A4 R7908 A1 TU701 D4 ZD119 D3
C144 C2 C309 B2 C526 C2 C668 A4 C775 B3 C955 A3 FB610 A5 Q603 A3 R176 D3 R241 D4 R455 D1 R541 D2 R671 A3 R7914 A1 TU702 D4 ZD120 D3
C145 C3 C310 A1 C531 D2 C669 A4 C776 D4 C956 A2 FB611 A5 Q604 A3 R177 D3 R244 C2 R457 C1 R542 D2 R673 A3 R7920 A1 U105 C2 ZD121 C2
C146 C2 C311 A1 C533 D1 C670 A4 C777 B3 CN102 D3 FB612 A5 Q605 A3 R178 D3 R245 C2 R460 D1 R551 D1 R674 A3 R7928 B1 U301 B1 ZD124 C2
C147 C3 C312 A1 C601 A4 C671 A3 C779 C4 CN103 D5 FB701 B4 Q608 A3 R179 C3 R246 B3 R462 D1 R552 D2 R675 A4 R793 B4 U401 B2 ZD125 C2
C148 C2 C401 B3 C602 A4 C672 A3 C780 C4 CN104 C5 FB703 B4 Q610 A3 R183 C3 R247 B3 R464 C1 R602 A4 R676 A4 R7930 C1 U402 B1 ZD126 C2
C149 B3 C402 D1 C603 A4 C673 B3 C781 C4 CN105 D2 FB704 B5 Q611 A4 R184 D3 R248 C2 R465 C1 R603 A4 R685 B4 R795 B4 U404 A1 ZD127 C2
C150 B3 C403 D1 C606 A4 C676 A3 C783 C3 CN106 D3 FB706 C4 Q707 C4 R185 D3 R302 A1 R466 D1 R604 A4 R701 D4 R909 C1 U405 C1 ZD128 C2
C151 C3 C404 D1 C607 A4 C677 A3 C7901 A2 CN107 D3 FB707 C4 Q708 C4 R186 D3 R308 B2 R467 D1 R605 A3 R705 B4 R910 B1 U406 D1 ZD129 C2
C152 D5 C405 D1 C608 A4 C682 A3 C7903 C1 CN108 C2 FB710 B4 Q7901 A1 R188 C2 R309 B2 R468 D1 R606 A3 R707 B4 R912 A1 U407 C1 ZD130 C3
C154 C3 C406 A1 C609 A4 C683 A3 C7905 C1 CN109 C3 FB901 A2 Q7903 A1 R189 C2 R310 B2 R469 D1 R607 A4 R712 C4 R913 B1 U501 D2 ZD131 C3
C156 D5 C407 A1 C611 A4 C684 A3 C7906 A1 CN301 B2 FB902 C4 Q902 B1 R191 C2 R311 B2 R470 C2 R608 A4 R713 B4 R915 A2 U502 C2 ZD132 D4
C157 C5 C424 B2 C612 A4 C707 B4 C7908 A2 CN401 A2 FB903 C1 Q904 B1 R192 C2 R401 C1 R471 D1 R609 A4 R722 B4 R921 A2 U503 D2 ZD133 D4
C158 B3 C425 B2 C614 A4 C708 B4 C7912 A3 CN402 D1 L101 C2 Q905 A1 R193 C2 R402 C1 R472 D1 R610 A4 R737 B4 R931 C1 U504 D2 ZD402 C1
C159 B2 C433 B1 C615 A4 C709 B4 C7915 A2 CN404 D1 L105 D3 Q907 D1 R194 C2 R403 C1 R473 D1 R611 A4 R740 B4 R934 D1 U505 D5 ZD404 C1
C160 C5 C434 B1 C616 A4 C710 B4 C7917 A1 CN405 C1 L106 D3 Q908 C1 R195 C2 R404 D1 R475 C1 R613 A3 R743 B4 R935 D1 U506 D5 ZD405 D3
C161 B3 C435 B1 C618 A4 C711 B4 C7919 A2 CN406 C1 L107 C3 Q909 D1 R196 C2 R406 C1 R476 C1 R614 A3 R745 B4 R941 D1 U507 D5 ZD406 D3
C162 B3 C437 B1 C619 A3 C712 B4 C7920 A3 CN407 D3 L108 D2 R105 C3 R197 C2 R407 C1 R477 D1 R615 A3 R750 C4 R942 D1 U508 D1 ZD407 C1
C163 B2 C438 B1 C620 B3 C713 B4 C7921 C4 CN501 D2 L109 D2 R106 C3 R198 C2 R408 D1 R478 D1 R616 A3 R751 C4 R944 A2 U601 A4 ZD408 C1
C164 C3 C439 B2 C621 B3 C714 B4 C7922 C4 CN502 D5 L110 D2 R107 C3 R199 C2 R409 D1 R479 D1 R617 A3 R752 C4 R945 A2 U602 B3 ZD409 C1
C166 B2 C440 B1 C623 B3 C715 B4 C7924 A1 CN601 C5 L111 C2 R108 C3 R200 C2 R410 D1 R480 D1 R619 A3 R753 C4 R946 A2 U603 A3 ZD410 D1
C167 C5 C442 D1 C625 A3 C716 B4 C7927 A1 CN602 A5 L112 C2 R110 C3 R201 C2 R411 B2 R482 B2 R622 A4 R756 B4 R947 C1 U605 A3 ZD411 D1
C168 C3 C443 B1 C626 B3 C717 B4 C7929 A1 CN702 B4 L113 C2 R111 C3 R202 C2 R413 A2 R483 B2 R623 A4 R757 B4 RN401 A2 U701 B5 ZD501 D2
C170 B2 C444 B2 C628 C5 C718 B4 C7931 C2 CN901 B1 L114 C2 R129 B3 R203 C2 R414 C1 R484 D1 R624 A3 R762 C4 RN402 B1 U704 C4 ZD502 D5
C171 D2 C445 C1 C629 C5 C719 B4 C7932 A2 CN902 B1 L301 A1 R130 B3 R204 C3 R415 C1 R485 C1 R630 A3 R765 C4 RN403 B1 U705 B4 ZD601 C5
C172 D2 C446 D1 C631 A3 C720 B4 C7933 A1 D401 C2 L302 A1 R142 C3 R205 C2 R416 B2 R486 C1 R632 A3 R766 C4 RN404 B1 U901 A2 ZD602 C5
C173 D2 C447 B1 C633 B3 C722 B4 C7934 A1 D402 D1 L303 A1 R144 C3 R206 C3 R417 A2 R487 C1 R633 A3 R767 C4 RN405 B1 U902 C1
HUDSON 9 50
C110 D3 C485 B2 C740 C4 FB416 B1 R492 B2 R714 A4
C112 D3 C486 B3 C741 C4 FB417 B1 R493 B2 R715 C4
C134 C2 C491 B2 C743 C4 FB602 A3 R497 C2 R716 B4
C138 C2 C494 B2 C745 C4 FB605 A3 R498 C2 R718 B4
C140 C2 C498 C2 C748 C4 FB606 A3 R499 C2 R719 A4
C165 B2 C499 C2 C749 B4 FB702 A4 R503 D5 R720 B4
C169 B2 C500 B2 C751 C4 FB708 C5 R505 D5 R721 B4
C174 B2 C502 B2 C752 C4 FB709 C5 R509 C1 R723 B4
C175 B2 C503 B2 C754 C4 FB904 B2 R510 D5 R724 B4
C176 B2 C504 B2 C755 C4 L701 D4 R517 D2 R725 B4
C177 B2 C505 B2 C761 C4 L702 A4 R525 D5 R726 B4
C179 B2 C506 B2 C769 C4 L703 C4 R528 D2 R727 B4
C180 B2 C507 C2 C773 D4 L704 C4 R529 D2 R728 B4
C197 C2 C508 C2 C774 D4 L705 D4 R532 C1 R729 D4
C208 B3 C509 C2 C778 C4 L707 D4 R533 C1 R730 C4
C209 B3 C511 B3 C785 D4 L708 D4 R534 C1 R731 C4
C301 B1 C512 B3 C786 D4 L709 C4 R537 D5 R732 C4
C302 B2 C513 B2 C787 C4 L710 D4 R538 D5 R733 B4
C303 B2 C514 B2 C788 C4 Q301 B1 R540 D5 R734 B4
C304 B2 C515 B2 C789 D4 Q502 D5 R543 C2 R735 B4
C306 B2 C516 B2 C790 D4 Q503 D5 R544 C2 R736 B4
C307 B2 C517 B2 C791 C4 Q507 C2 R545 D2 R738 B4
C408 B2 C518 C2 C7916 A1 Q508 D5 R546 D5 R741 B3
C409 B2 C519 C2 C792 C4 Q602 A4 R547 D5 R744 B3
C410 B2 C520 C2 C793 B4 Q606 B4 R548 D5 R748 B4
C411 B2 C521 D2 C7930 A1 Q609 A3 R549 D5 R749 A4
C412 B2 C523 D2 C794 B4 Q702 B4 R550 D5 R758 C4
C413 B2 C524 C2 C795 B4 Q703 B4 R601 B5 R759 D4
C414 B2 C527 C1 C796 B4 Q906 A1 R612 A3 R760 D4
C415 B2 C528 C2 C797 C4 Q910 C1 R618 B3 R761 C4
C416 B2 C529 C2 C907 A1 R143 C2 R620 B3 R7903 C1
C417 B2 C530 C2 C909 A2 R155 C3 R621 A3 R791 C4
C418 B2 C532 D5 C918 A1 R157 C3 R625 A3 R7918 A2
C419 B2 C604 A4 C923 A1 R158 C3 R626 A3 R7919 A2
C420 B2 C605 A4 C933 C1 R161 C3 R627 A3 R792 C4
C421 B2 C610 A4 C957 B2 R182 B2 R628 B3 R7922 C1
C422 B2 C617 A4 D101 C2 R215 C2 R629 B5 R7925 A1
C423 B2 C622 B3 D504 C2 R242 B3 R639 A3 R7927 A1
C426 B2 C627 B5 D506 D5 R243 B3 R646 A3 R7929 A2
C427 B2 C630 B5 D507 D5 R305 B1 R647 B3 R794 D5
C428 B2 C639 B3 D510 D4 R306 B1 R648 A3 R901 A2
C429 B2 C641 B3 D511 D2 R307 B1 R649 A3 R906 C1
C430 B2 C642 B3 D7902 A1 R405 D1 R651 B3 R923 A1
C431 B2 C646 A3 FB101 B2 R412 B1 R668 A4 R924 A1
C432 B2 C674 A3 FB107 B2 R421 B2 R672 A3 R926 A1
C436 B1 C675 A3 FB108 B2 R422 B2 R677 B4 R932 C4
C441 D1 C678 A3 FB301 B2 R423 B2 R678 B4 R933 C4
C448 B1 C679 A3 FB302 B2 R424 B2 R679 B5 R939 C1
C449 B1 C680 A3 FB401 B2 R425 B2 R680 B4 R940 C1
C450 B1 C681 A3 FB403 B3 R426 C2 R681 A3 R943 A2
C451 B1 C685 A3 FB404 B2 R429 D1 R682 A3 RN101 C2
C452 D1 C686 A3 FB405 B3 R444 C1 R683 A3 TH701 A4
C475 B2 C701 C4 FB406 B3 R448 B2 R684 A3 U408 C2
C476 B2 C702 B4 FB407 B2 R454 B2 R686 B3 U604 A3
C477 B2 C703 B4 FB408 B2 R456 C1 R687 B3 U702 B4
C478 B2 C704 A4 FB409 C2 R458 D1 R702 B4 U703 B5
C479 B2 C705 B4 FB410 B2 R459 C1 R703 B4 ZD109 C3
C480 B3 C706 B4 FB411 B2 R461 C1 R704 B4 ZD110 D3
C481 B2 C728 B4 FB412 C2 R463 C1 R706 B4 ZD401 D1
C482 B2 C730 B4 FB413 B3 R481 D1 R709 B4 ZD403 C2
C483 B2 C736 C4 FB414 B2 R488 C2 R710 B4
C484 B2 C737 C4 FB415 C2 R490 D1 R711 B4
HUDSON 9 51
7.2 Power Board
715T2783 1 3
BD901 C5 J802 A3 PIN20 C1
C812 B3 J803 B3 PIN21 C1
C816 B1 J804 A3 PIN22 B1
C817 A2 J805 B2 PIN23 A1
C819 A2 J806 B2 PIN24 A2
C820 A2 J807 B3 PIN25 A2
C821 D2 J808 A2 PIN26 A2
C822 C1 J809 A3 PIN27 A1
C824 C1 J810 B3 PIN28 D3
C901 D3 J811 B2 PIN29 B5
C902 D5 J812 A3 PIN3 A1
C903 C3 J813 A3 PIN30 A1
C905 C5 J814 B3 PIN31 D1
C906 C4 J815 C2 PIN32 A1
C908 C3 J816 C2 PIN33 A2
C914 B4 J901 C5 PIN34 D3
C915 A5 J902 A4 PIN35 B3
C917 B4 J903 B5 PIN36 C4
C918 A4 J904 B4 PIN37 D5
C922 A4 J905 A4 PIN38 C1
C930 B5 L801 A2 PIN4 C3
C931 B5 L802 D2 PIN5 D4
CN801 A1 L902 C4 PIN6 C5
CN802 A1 L903 A4 PIN7 D5
CN803 D1 L904 A4 PIN8 C5
CN804 C1 NR901 D3 PIN9 C5
CN901 D4 PIN01 D1 PT801 C2
CN902 A5 PIN1 D4 PT802 C2
D901 C4 PIN10 D4 Q901 C5
D902 C3 PIN11 B1 R828 C1
D904 A5 PIN12 C4 R908 C4
D906 A4 PIN13 D4 R914 C5
F901 D4 PIN14 D4 R940 A5
F902 A4 PIN15 D3 RV901 C4
F903 A5 PIN16 D5 SG901 C4
FB901 B5 PIN17 D1 SG902 D4
IC902 B3 PIN18 D2 T901 B4
IC903 B3 PIN19 C1 ZD903 C5
J801 D2 PIN2 D4
HUDSON 9 52
C801 B3 Q805 B2 R902 C3
C802 C2 Q806 C2 R903 B5
C803 B3 Q903 A5 R904 C4
C804 B3 R802 A3 R905 C4
C805 B2 R803 B2 R906 C5
C806 B3 R804 C2 R907 C5
C807 A2 R805 B3 R909 C4
C808 A3 R806 B2 R912 C5
C809 A3 R807 C2 R918 A4
C810 A2 R808 C2 R919 B4
C811 B3 R813 A3 R920 B4
C813 B2 R814 B3 R922 C4
C814 B2 R815 B3 R924 B4
C815 B2 R816 B3 R925 B3
C818 A2 R817 B2 R927 A4
C823 D2 R818 B3 R928 B3
C912 B3 R819 B2 R929 A4
C916 A5 R820 A2 R930 A4
C919 C4 R821 A3 R931 C3
C920 A4 R822 A2 R934 B5
C921 A4 R823 B2 R935 A5
C923 C4 R824 B2 R936 A5
C924 C4 R825 B2 R937 B4
C925 C3 R826 B2 R938 C5
C927 A4 R827 D2 R941 C4
C929 A5 R829 A2 R943 A5
C932 A5 R830 A2 RJ801 B2
D801 B3 R836 A2 RJ901 C4
D802 B2 R837 A2 RJ902 B3
D803 C2 R838 A2 RJ903 C4
D804 C3 R839 A2 RJ904 C3
D805 B2 R840 D2 RJ905 C4
D806 A2 R841 D2 SG12 C4
D807 A3 R842 A3 SG13 C4
D808 D2 R843 A2 SG14 D4
D809 D2 R844 D2 SG15 D4
D909 C5 R845 D2 SG16 D4
D910 C3 R846 D2 ZD802 B2
IC801 B3 R847 D2 ZD803 C2
IC901 C4 R848 D2 ZD901 C3
Q802 A2 R849 D2 ZD902 B4
Q803 B2 R900 C3 ZD920 A5
Q804 D2 R901 D3
HUDSON 9 53
7.3 Key Board
715T2860 1PHI
CN101 A2
GND1 A3
SW101 A3
SW102 A3
SW103 A2
SW104 A2
SW105 A1
SW106 A1
C101 A2
C102 A2
C103 A2
R101 A3
R102 A2
R103 A3
R104 A3
R105 A3
R106 A1
R107 A1
R108 A2
R109 A1
ZD101 A2
ZD102 A2
ZD103 A2
HUDSON 9 54
7.4 IR Board
715T2859 1PHI
HUDSON 9 55
8. Wiring Diagram
Main Board
I
S
P
1
2
P
i
n
4
P
i
n
30 Pin
Panel
Head Phone
MT5335PGU
Scaler IC (U401)
12
C
N
9
0
2
LVDS Cable
1
1
P
i
n
11
1
CN404
1
Power Board
11 Pin
AC IN
CN902
11 1
CN802
CN801
CN804
CN803
CN901
1 6
IR Board
6 Pin
CN1
Speaker R/L
CN602
Key
Board
5
Pin
CN101
1
5
4
1
HDMI
S-VIDEO
AUDIO R/L
VIDEO
1
30
CN301
HUDSON 9 56
9. Scalar Board Overview
SCALER IC
D-SUB
DC-DC
HDMI
HDMI
DDR-SDRAM
HUDSON 9 57
10. Mechanical Instructions
1. Stand
Remove the screws remarked in red to remove the stand.
2. Rear Cover
a. Remove the screws remarked in red, which secure the rear cover.
b. Lift the rear cover from the cabinet. Make sure that wires and flat foils are not damaged during cover removal.
Fig2
HUDSON 9 58
3. IR Board
Unplug the connector remarked in blue.
4. Speaker
Remove the screws remarked in red.
5. Bezel
Remove the screws remarked in red.
HUDSON 9 59
6. Power Board
a. Unplug connectors remarked in blue.
b. Release screws remarked in red and remove the power board.
7. Shielding EMI
Release the screws remarked in red and remove the shielding-EMI.
HUDSON 9 60
8. Scaler Board
a. Unplug connectors remarked in blue.
b. Release screws remarked in red and remove the Scaler Board.
9. Bracket/Main Frame
Remove the screws remarked in red.
HUDSON 9 61
11. Repair Flow Chart
11.1 Main Board
(1). No Power (LED orange)
Change key board/IR board
Check U401 Change U401
Check I
2
C bus
Check key board/IR board
Check I
2
C communication
No picture
OK
NG
OK
OK
NG
Check 24V power supply
OK
Check power supply circuit
NG
NG
Check main board Standby power supply Change U902
OK
NG
HUDSON 9 62
(2). Abnormal Display
Check TV system setup
Check the source Reset source
NG
Check signal filter circuit Replace the filter or resistance
RF signal
Check Tuner
Replace Tuner
Check LVDS cable
Check input
Replace LVDS cable
Check panel
Replace panel
OK
OK
NG
OK
OK
NG
OK
OK
NG
OK
NG
HUDSON 9 63
(3). No Sound
Check the source
Reset source
NG
OK
Check input signal
TV SIF
Check TV
system
Reset TV system
NG
Check TU701
NG
Change TU701
Check U401
OK
OK
Change U401
NG
Check U601
OK
NG
Change U601
Check speaker
NG
Change speaker
Check if mute
OK
HUDSON 9 64
11.2. Power/Inverter Board
(1) No power
Check bridge rectified circuit and F901 circuit
Check R904, R905 and Change IC901
1) Check IC901, D902, C908
2) Check IC902 OVP circuit
Check CN902 pin10, 11 = 16V
Check AC line volt 110V or 220V
Check AC input
Check the voltage of C905 (+)
Check start voltage for the pin8 of IC901
NG
Check the auxiliary voltage is bigger than
10V and smaller than 20V
OK
NG
Check T901, Q903, D906, D904, D912, ZD920, ZD902, IC903
Check IC901 pin5 PWM wave
OK
Check IC901
NG
NG
OK
NG
OK
OK
HUDSON 9 65
(2) W / LED, No Backlight
Check R803=16V
NG
OK
Check adapter or MB
Check ON/OFF
Check Interface board
NG
OK
Check IC801
NG
OK
Change ON/OFF
NG
OK
Change IC801
Check the input of Q805, Q806
NG
Check the output of PT801
Check connecter & lamp
OK
NG
Change PT801
OK
Check IC801 PIN15 have the output of square wave at short time
Change Q805, Q806, D801, D802, D803, Q804
HUDSON 9 66
11.3 Key Board
OSD is unstable or not working
Is Key Pad Board connecting normally? Connect Key Pad Board
Is Button Switch normally? Replace Button Switch
Y
N
N
Is Key Pad Board normally?
Replace Key Pad Board
Y
N
Y
Check Main Board
HUDSON 9 67
12. ISP Instruction
12.1. Environment Setup
Before you start to write the code, we suggest you setup the environment first. This chapter lists the setup
requirements and guides you to setup and test your development environment.
12.2 Connect to ISP Board
Use USB port connecting PC & MT538x Board via ISP board.
USB Cable
Use Desktop PC or
Notebook USB Port
ISP Board (USB
to RS232)
MT538x
Board
RS232
HUDSON 9 68
12.3. The process of ISP write is as follows:
1. Unzip USB2COM Driver. zip to C:\, install the USB driver(PL-2303 Driver Installer.exe))
PL-2303 Driver
Installer.zip
2. Unzip USB2COM Driver. zip to C:\
Use MTK_Tools to download .bin file. (AOC_5335_image_MTK1032_62A_V203_2k80604_2402.bin)
MTK_TOOL.rar
3. Make sure the Type MTK538X && USB Baud Rate 1152008 && Load the correct bin file.
HUDSON 9 69
4. Set COM port resource that used by USB Port.
5. Set Baud rate 1152008 & High speed item Enable. & MT538x
NOTE: Upwards action only to do First Update.
HUDSON 9 70
6. AC Power ON TV set, and then Press RC Power key DC on the TV set.
Press P^P key to exit VERGIN mode
7. Push Upgrade button. (Waiting for Finished! message. cant in PC Source and cant plug off when
upgrade)
HUDSON 9 71
8. When Finished! Upgrade message, AC Power OFF/ON the TV set. Check the S/W version correct or not.
(Press Menu Key Go to Install Current software info
NOTE: PLS CHECK FACT UPGRADE SW VER
9. Choice factory mode on main menu after press [0, 6, 2, 5, 9, 6, INFO]. Change item 58.PANEL_ID to 2(22
inch panel)
HUDSON 9 72
10. Choice item 10.NVM_INITIAL to [ON], Press right Key to Enable.
11. Press RC Power Key to DC off the TV set; TV set LED will change to RED, pull out AC cable and Pack it.
12. Audio speaker Check (only to do this action by 3312PCSWK17.2 ETD, the others not to do ).
When to do on top Upgrade SW step2, Add Below step to check Audio speaker.
1) Press source key choose PC source. Press volumes add key, to increase the volume to 70, and input
PC Audio signal to TV, check the sound fluent, no abnormity.
2) Need to do S/W UPDATE function. Please see on top SOP.
HUDSON 9 73
13. DDC Instruction
13.1. DDC Data Re-programming
In case the main EEPROM with Software DDC which store all factory settings were replaced because a defect
repaired monitor the serial numbers have to be re-programmed.
It is advised to re- soldered the main EEPROM with Software DDC from the old board onto the new board if
circuit board have b een replaced, in this case the DDC data does not need to be re-programmed.
13.2. Connect the DDC board as follow:
Rear_HDMI
Side_HDMI
VGA
Connect to
the PC LPT
HUDSON 9 74
13.3 The process of DDC write is as follows:
1. Take analog DDC write
2. choose the , search the program and click OK
HUDSON 9 75
3. click Check button, If it burns successfully, it will show as the follow picture:
HUDSON 9 76
13.4 220TW9 EDID
Analog
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
-----------------------------------------------
00| 00 FF FF FF FF FF FF 00 41 0C 28 C0 40 E2 01 00
10| 04 12 01 03 1C 2F 1E 78 2A E5 B5 A3 55 49 99 27
20| 13 50 54 BD CE 80 81 40 81 80 95 00 B3 00 81 4F
30| 71 4A 01 01 01 01 21 39 90 30 62 1A 27 40 68 B0
40| 36 00 D6 2C 11 00 00 1E 00 00 00 FF 00 54 59 35
50| 30 37 30 39 31 32 33 34 35 36 00 00 00 FC 00 50
60| 68 69 6C 69 70 73 20 32 32 30 54 57 00 00 00 FD
70| 00 38 4C 1E 50 10 00 0A 20 20 20 20 20 20 00 34
EDID Structure Version/Revision: 01 03
<-Vendor/Product Identification :->
ID Manufacturer Name: PHL
ID Product Code: C028
ID Serial Number: 123456
Week of Manufacture: 4
Year of Manufacture: 2008
<-Basic Display Parameters/Features :->
Video i/p definition: Analog
Max. H. Image Size: 47cm
Max. V. Image Size: 30cm
Display Gamma: 2.2
<-Color Characteristics :->
Rx: 0.640 Gx: 0.285 Bx: 0.154 Wx: 0.312
Ry: 0.334 Gy: 0.599 By: 0.077 Wy: 0.329
<-Established Timings :->
Established Timings 1: BD
720 x 400 @ 70Hz VGA, IBM
640 x 480 @ 60Hz VGA, IBM
640 x 480 @ 67Hz Apple,Mac II
640 x 480 @ 72Hz VESA
640 x 480 @ 75Hz VESA
800 x 600 @ 60Hz VESA
Established Timings 2: CE
800 x 600 @ 72Hz VESA
800 x 600 @ 75Hz VESA
1024 x 768 @ 60Hz VESA
1024 x 768 @ 70Hz VESA
1024 x 768 @ 75Hz VESA
Established Timings 3:80
1152 x 870 @75Hz Apple,Mac II
<-Standard Timing Identification :->
1280 x 960 @ 60Hz
1280 x 1024 @ 60Hz
1440 x 900 @ 60Hz
1680 x 1050 @ 60Hz
1280 x 960 @ 75Hz
1152 x 864 @ 70Hz
HUDSON 9 77
<-Detailed Timing Descriptions :->
FC (Monitor Name): Philips 220TW
FD (Monitor Limits):
Min. V. rate: 56 Hz
Max. V. rate: 76 Hz
Min. H. rate: 30 KHz
Max. H. rate: 80 KHz
Max. P Clock: 160 MHz
FF (Monitor SN): TY50709123456
Detailed Timing: 1680x1050 @ 60Hz
Extension Flag: 00
Block0 Checksum: 34
Rear_HDMI
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
--------------------Block 0--------------------
00| 00 FF FF FF FF FF FF 00 41 0C 28 C0 01 01 01 01
10| 04 12 01 03 80 2F 1D 78 2A 78 F5 A6 55 48 9B 26
20| 12 50 54 BD CE 00 81 40 81 80 95 00 B3 00 01 01
30| 01 01 01 01 01 01 21 39 90 30 62 1A 27 40 68 B0
40| 36 00 34 CD 31 00 00 1C 7C 2E 90 A0 60 1A 1E 40
50| 30 20 36 00 34 CD 31 00 00 1A 00 00 00 FD 00 38
60| 4C 1E 50 10 00 0A 20 20 20 20 20 20 00 00 00 FC
70| 00 50 68 69 6C 69 70 73 20 32 32 30 54 57 01 66
--------------------Block 1--------------------
00| 02 03 29 F1 4F 13 04 14 05 06 07 02 03 11 12 15
10| 16 10 1F 01 23 09 07 07 83 01 00 00 6C 03 0C 00
20| 10 00 00 00 C0 01 01 01 01 01 1D 00 BC 52 D0 1E
30| 20 B8 28 55 40 34 CD 31 00 00 1E 01 1D 80 18 71
40| 1C 16 20 58 2C 25 00 34 CD 31 00 00 9E 01 1D 00
50| 72 51 D0 1E 20 6E 28 55 00 34 CD 31 00 00 1E 01
60| 1D 80 D0 72 1C 16 20 10 2C 25 80 34 CD 31 00 00
70| 9E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 C7
-------------------------------------------------------
Block 0:
EDID Structure Version/Revision: 01 03
<-Vendor/Product Identification :->
ID Manufacturer Name: PHL
ID Product Code: C028
HUDSON 9 78
ID Serial Number: No Use
Week of Manufacture: 4
Year of Manufacture: 2008
<-Basic Display Parameters/Features :->
Video i/p definition: Digital
Max. H. Image Size: 47cm
Max. V. Image Size: 29cm
Display Gamma: 2.2
<-Color Characteristics :->
Rx: 0.649 Gx: 0.283 Bx: 0.151 Wx: 0.312
Ry: 0.335 Gy: 0.605 By: 0.073 Wy: 0.329
<-Established Timings :->
Established Timings 1: BD
720 x 400 @ 70Hz VGA, IBM
640 x 480 @ 60Hz VGA, IBM
640 x 480 @ 67Hz Apple,Mac II
640 x 480 @ 72Hz VESA
640 x 480 @ 75Hz VESA
800 x 600 @ 60Hz VESA
Established Timings 2: CE
800 x 600 @ 72Hz VESA
800 x 600 @ 75Hz VESA
1024 x 768 @ 60Hz VESA
1024 x 768 @ 70Hz VESA
1024 x 768 @ 75Hz VESA
Established Timings 3:00
<-Standard Timing Identification :->
1280 x 960 @ 60Hz
1280 x 1024 @ 60Hz
1440 x 900 @ 60Hz
1680 x 1050 @ 60Hz
<-Detailed Timing Descriptions :->
HUDSON 9 79
Detailed Timing: 1680x1050 @ 60Hz
Detailed Timing: 1680x1050 @ 60Hz
FD (Monitor Limits):
Min. V. rate: 56 Hz
Max. V. rate: 76 Hz
Min. H. rate: 30 KHz
Max. H. rate: 80 KHz
Max. P Clock: 160 MHz
FC (Monitor Name) : Philips 220TW
Extension Flag: 01
Block0 Checksum: 66
-------------------------------------------------------
Block 1:
Extended Block Type: CEA 861B
Detailed Timing Blocks start at Byte: 29
DTV Underscan YES
DTV Basic Audio YES
YCbCr (4:4:4) YES
YCbCr (4:2:2) YES
<-Video Short Block Description :->
1280 x 720 P 50Hz 16:9
1280 x 720 P 59.94/60Hz 16:9
1920 x 1080 I 50Hz 16:9
1920 x 1080 I 59.94/60Hz 16:9
720(1440) x 480 I 59.94/60Hz 4:3
720(1440) x 480 I 59.94/60Hz 16:9
720 x 480 P 59.94/60Hz 4:3
720 x 480 P 59.94/60Hz 16:9
720 x 576 P 50Hz 4:3
720 x 576 P 50Hz 16:9
720(1440) x 576 I 50Hz 4:3
720(1440) x 576 I 50Hz 16:9
1920 x 1080 P 59.94/60Hz 16:9
1920 x 1080 P 50Hz 16:9
HUDSON 9 80
640 x 480 P 59.94/60Hz 4:3
<-Audio Short Block Description :->
Numbers of Audio Channels: 2
Audio Format Description: Linear PCM
Audio Supported: 48KHz 44KHz 32 KHz
Audio Bit Rate: 24bit 20bit 16bit
<-Speaker Allocation :->
Speaker Allocation: FL/FR
<-Detailed Timing Descriptions: ->
Detailed Timing Descriptions: 1280x720 @ 50Hz
H Image Size: 820 mm V Image Size: 461 mm
Pixel Clock: 74 Hz Refreshed Mode: Non-Interlaced
Detailed Timing Descriptions: 1920x540 @ 60Hz
H Image Size: 820 mm V Image Size: 461 mm
Pixel Clock: 74 Hz Refreshed Mode: Interlaced
Detailed Timing Descriptions: 1280x720 @ 60Hz
H Image Size: 820 mm V Image Size: 461 mm
Pixel Clock: 74 Hz Refreshed Mode: Non-Interlaced
Detailed Timing Descriptions: 1920x540 @ 50Hz
H Image Size: 820 mm V Image Size: 461 mm
Pixel Clock: 74 Hz Refreshed Mode: Interlaced
Block1 Checksum: C7
HUDSON 9 81
Side_HDMI
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
--------------------Block 0--------------------
00| 00 FF FF FF FF FF FF 00 41 0C 28 C0 01 01 01 01
10| 04 12 01 03 80 2F 1D 78 2A 78 F5 A6 55 48 9B 26
20| 12 50 54 BD CE 00 81 40 81 80 95 00 B3 00 01 01
30| 01 01 01 01 01 01 21 39 90 30 62 1A 27 40 68 B0
40| 36 00 34 CD 31 00 00 1C 7C 2E 90 A0 60 1A 1E 40
50| 30 20 36 00 34 CD 31 00 00 1A 00 00 00 FD 00 38
60| 4C 1E 50 10 00 0A 20 20 20 20 20 20 00 00 00 FC
70| 00 50 68 69 6C 69 70 73 20 32 32 30 54 57 01 66
--------------------Block 1--------------------
00| 02 03 29 F1 4F 13 04 14 05 06 07 02 03 11 12 15
10| 16 10 1F 01 23 09 07 07 83 01 00 00 6C 03 0C 00
20| 20 00 80 00 C0 01 01 01 01 01 1D 00 BC 52 D0 1E
30| 20 B8 28 55 40 34 CD 31 00 00 1E 01 1D 80 18 71
40| 1C 16 20 58 2C 25 00 34 CD 31 00 00 9E 01 1D 00
50| 72 51 D0 1E 20 6E 28 55 00 34 CD 31 00 00 1E 01
60| 1D 80 D0 72 1C 16 20 10 2C 25 80 34 CD 31 00 00
70| 9E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 37
-------------------------------------------------------
Block 0:
EDID Structure Version/Revision: 01 03
<-Vendor/Product Identification :->
ID Manufacturer Name: PHL
ID Product Code: C028
ID Serial Number: No Use
Week of Manufacture: 4
Year of Manufacture: 2008
HUDSON 9 82
<-Basic Display Parameters/Features :->
Video i/p definition: Digital
Max. H. Image Size: 47cm
Max. V. Image Size: 29cm
Display Gamma: 2.2
<-Color Characteristics :->
Rx: 0.649 Gx: 0.283 Bx: 0.151 Wx: 0.312
Ry: 0.335 Gy: 0.605 By: 0.073 Wy: 0.329
<-Established Timings :->
Established Timings 1: BD
720 x 400 @ 70Hz VGA, IBM
640 x 480 @ 60Hz VGA, IBM
640 x 480 @ 67Hz Apple, Mac II
640 x 480 @ 72Hz VESA
640 x 480 @ 75Hz VESA
800 x 600 @ 60Hz VESA
Established Timings 2: CE
800 x 600 @ 72Hz VESA
800 x 600 @ 75Hz VESA
1024 x 768 @ 60Hz VESA
1024 x 768 @ 70Hz VESA
1024 x 768 @ 75Hz VESA
Established Timings 3:00
HUDSON 9 83
<-Standard Timing Identification :->
1280 x 960 @ 60Hz
1280 x 1024 @ 60Hz
1440 x 900 @ 60Hz
1680 x 1050 @ 60Hz
<-Detailed Timing Descriptions :->
Detailed Timing: 1680x1050 @ 60Hz
Detailed Timing: 1680x1050 @ 60Hz
FD (Monitor Limits):
Min. V. rate: 56 Hz
Max. V. rate: 76 Hz
Min. H. rate: 30 KHz
Max. H. rate: 80 KHz
Max. P Clock: 160 MHz
FC (Monitor Name): Philips 220TW
Extension Flag: 01
Block0 Checksum: 66
-------------------------------------------------------
Block 1:
Extended Block Type: CEA 861B
Detailed Timing Blocks start at Byte: 29
DTV Underscan YES
HUDSON 9 84
DTV Basic Audio YES
YCbCr (4:4:4) YES
YCbCr (4:2:2) YES
<-Video Short Block Description :->
1280 x 720 P 50Hz 16:9
1280 x 720 P 59.94/60Hz 16:9
1920 x 1080 I 50Hz 16:9
1920 x 1080 I 59.94/60Hz 16:9
720(1440) x 480 I 59.94/60Hz 4:3
720(1440) x 480 I 59.94/60Hz 16:9
720 x 480 P 59.94/60Hz 4:3
720 x 480 P 59.94/60Hz 16:9
720 x 576 P 50Hz 4:3
720 x 576 P 50Hz 16:9
720(1440) x 576 I 50Hz 4:3
720(1440) x 576 I 50Hz 16:9
1920 x 1080 P 59.94/60Hz 16:9
1920 x 1080 P 50Hz 16:9
640 x 480 P 59.94/60Hz 4:3
<-Audio Short Block Description :->
Numbers of Audio Channels: 2
Audio Format Description: Linear PCM
Audio Supported: 48KHz 44KHz 32 KHz
Audio Bit Rate: 24bit 20bit 16bit
<-Speaker Allocation :->
Speaker Allocation: FL/FR
<-Detailed Timing Descriptions: ->
HUDSON 9 85
Detailed Timing Descriptions: 1280x720 @ 50Hz
H Image Size: 820 mm V Image Size: 461 mm
Pixel Clock: 74 Hz Refreshed Mode: Non-Interlaced
Detailed Timing Descriptions: 1920x540 @ 60Hz
H Image Size: 820 mm V Image Size: 461 mm
Pixel Clock: 74 Hz Refreshed Mode: Interlaced
Detailed Timing Descriptions: 1280x720 @ 60Hz
H Image Size: 820 mm V Image Size: 461 mm
Pixel Clock: 74 Hz Refreshed Mode: Non-Interlaced
Detailed Timing Descriptions: 1920x540 @ 50Hz
H Image Size: 820 mm V Image Size: 461 mm
Pixel Clock: 74 Hz Refreshed Mode: Interlaced
Block1 Checksum: 37
HUDSON 9 86
14. White Balance, Luminance Adjustment
Note: The Service Mode is described in chapter 5. Menu navigation is done with the CURSOR UP, DOWN, LEFT or
RIGHT keys of the remote control transmitter.
1. EX3 YPbPr mode Display adjustment
Equipment Requirements:
Minolta CA-110 or CA-210 or Equivalent Color analyzer. Quantum Data Pattern Generator802G, 802BT, 881 or
equivalent instrument.
Input requirements:
Input Signal Type: YPbPr signal
1. 1080i mode, TVBar100 pattern by 802G or 802BT or 881.
2. Select Smart picture to Personal mode and check the x, y data.
Input Signal Strength: 1000mVpp for Y signal; +/-350mV for PbPr signal.
Input Injection Point: EX3 YPbPr (RAC jack) 1080i, TVBar100 pattern27.
Alignment method:
1. Select source as "EXT3".
2. Set Smart picture as "Personal" and Contrast =50, Brightness=50, Color=50.
3. Apply "SMPTE color" pattern or "color bar with black & white" pattern by signal generator.
4. Enter factory mode menu: press numeric keys "062596" +"INFO" key+ "MENU" key (FAC mode menu). Then
select"Factory" item.
Alignment:
1. At FAC mode menu, select AUTO_COLOR item. Then press "OK" key to auto adjust ADC_GAIN_R,
ADC_GAIN_G, ADC_GAIN_B and ADC_OFFSET_R, ADC_OFFSET_G, ADC_OFFSET_B. Then store those
values to NVM.
2. Apply full white pattern.
3. Set color temperature to "NORMAL".
4. At FAC mode menu, keep the CLR_TEMP_B=128, and adjust the CLR_TEMP_G, CLR_TEMP_R values to meet
"NORMAL" color coordinates specification below. Then store those values to NVM.
5. Set color temperature to "WARM".
6. At FAC mode menu, keep the CLR_TEMP_R=128, and adjust the CLR_TEMP_G, CLR_TEMP_B values to meet
"WARM" color coordinates specification below. Then store those values to NVM.
7. Set color temperature to "COOL".
8. At FAC mode menu, keep the CLR_TEMP_B=128, and adjust the CLR_TEMP_G, CLR_TEMP_R values to meet
"COOL" color coordinates specification below. Then store those values to NVM.
Output Detection Points: Screen center.
HUDSON 9 87
Check (X, Y) coordinates as bellows:
VGA/AV/YPPR/HDMI model
Colortemp
WARM(6300K) COOL(10500K) NORMAL(7200K)
x 0.3140.015 0.2890.015 0.2960.015
y 0.3190.015 0.2910.015 0.2990.015
LV 230 230 230
2. PC Mode Adjustment
White balance adjustment (B)
Equipment Requirements: Minolta CA-110 or CA-210 or Equivalent Color analyzer Chroma 2250 or equivalent PC
signal generator
Input requirements:
Input Signal Type: PC VGA signal
1. 1024X768/60Hz PC mode with 5 white block pattern. (see the next figures)
2. Select Color temperature to Normal and check the x, y data.
Input Signal Strength: 0.7Vp-p linear voltage
Input Injection Point: PC D-SUB input
Alignment method:
1. Select source as "PC".
2. Set Contrast =50, Brightness=50, set Color Temperature as Normal and set Picture Format as Full Screen.
3. Apply "5 white block" pattern by VGA generator.
4. Enter factory mode menu: press numeric keys "062596" +"INFO" key+ "MENU" key (FAC mode menu). Then
select "Factory" item.
Alignment:
1. At FAC mode menu, select AUTO_COLOR item. Then press "OK" key to auto adjust ADC_GAIN_R,
ADC_GAIN_G, ADC_GAIN_B and ADC_OFFSET_R, ADC_OFFSET_G, ADC_OFFSET_B. Then store those
values to NVM.
2. Set color temperature to "NORMAL".
3. At FAC mode menu, keep the CLR_TEMP_B=128, and adjust the CLR_TEMP_G, CLR_TEMP_R values to meet
"NORMAL" color coordinates specification below. Then store those values to NVM.
4. Set color temperature to "WARM".
5. At FAC mode menu, keep the CLR_TEMP_R=128, and adjust the CLR_TEMP_G, CLR_TEMP_B values to meet
"WARM" color coordinates specification below. Then store those values to NVM.
6. Set color temperature to "COOL".
7. At FAC mode menu, keep the CLR_TEMP_B=128, and adjust the CLR_TEMP_G, CLR_TEMP_R values to meet
"COOL" color coordinates specification below. Then store those values to NVM.
VGA/AV/YPPR/HDMI model
Colortemp
WARM(6300K) COOL(10500K) NORMAL(7200K)
x 0.3140.015 0.2890.015 0.2960.015
y 0.3190.015 0.2910.015 0.2990.015
LV 230 230 230
HUDSON 9 88
Check grayscale
Check the color poor & noise condition of 32 gray pattern.
AUTO_COLOR" with five white block pattern
AUTO_COLOR" with five white block pattern
HUDSON 9 89
15. Monitor Exploded View
HUDSON 9 90
16. Recommended & Spare Parts List
220TW9FB/00
Item Location Philips 12NC PCM Codes Description Remark
1 FQ101 705TQ834139 BEZEL ASS'Y
2 FQ102 705TQ834140 REAR_COVER ASS'Y
3 FQ103 705TQ834138 STAND ASS'Y
4 FQ401 078T 496 2 M SPEAKER 6 OHM 5.5W 90X42mm
5 E750 750TVMC0Z1312M000F PANEL M220Z1-L03 C1 NB CMO
5 E750 750TVMC0Z1312N PANEL M220Z1-L03 C1 NB CMO
6 FQ003 PWTV7C41MAB3 POWER BOARD ASSY
7 FQ002 CBPF82FBQM SCALER BOARD ASSY
8 FQ004 KEPF8QA2 KEY BOARD ASSY
9 FQ007 IRPF8QA6 IR BOARD ASSY
FQ305 089T 17356G553 AUDIO CABLE
FQ307 089G 728HAA DB D-SUB CABLE
FQ301 089G404A18N IS POWER CORD
FQ404 098TR7BDXNTPHT REMOTE CONTROL YKF230-002
FQ202 P44GC00181310C 22 TV PHILPS CARTON
FQ205 705TQ8CS044 CUSHION ASSY
IC903 056G 139 3A IC PC123Y22FZ0F
PT801 080GL20T 33 DN X'FMR 99.3uH TK.2018R.101
T901 080TL22T 5 L X'FMR 530uH PT-009527-3
IC901 056G 379107 IC LD7575A PS SOP-8
IC801 056G 608 10 IC OZ9938GN-B SOIC-16
IC902 056G 158 12 KIA431A-AT/P TO-92
F901 084G 56 4 B FUSE 4A 250V
Y402 093G 22 61 HE XTL 1TC125DFNS004 32.768KHZ DT-38
Y701 093T 2264A J CRY NXS27.000AE15F-BT1 HC-49/US
HUDSON 9 91
Y401 093T 22902 C CRYSTAL 60MHz 9P HC-49/S
Y702 093G 22S64BHEL HSX840GA 27.00MHZ
U910 056G 379 82 IC G2996F1Uf SOP-8
U905 056G 379 86 IC AP1513SA SOP-8L
U904 056G 563 57 AP1510SA
U906 056G 563 75 G1084-33T43UF TO-252
U909 056G 563 93 IC G9084T43U TO-252
U903 056G 563109 IC SC4519S.TRT SO-8 EDP
U701 056G 563113 IC G1117-18T63Uf 1A/1.8V SOT-223
U908 056G 563126 IC G1117T63Uf SOT-223
U907 056G 563126 IC G1117T63Uf SOT-223
U902 056G 563129 IC AME8810-AEGTZ 0.6A/3.3V SOT-223
U605 056G 563136 IC G78M12T45U TO-252
U911 056G 585 11 IC AZ1117D-5.0-E1 AAC
U402 056G 615 71 IC HY5DU121622DTP-D43 512Mb TSOPII-66
U602 056G 616 3 IC PT2308-S-TP(L) SO-8
U604 056G 616 35 IC NJM4580V-TE2 SSOP8
U503 056G 662 10 IC RClamp0524P.TCT
U506 056G 662 10 IC RClamp0524P.TCT
U505 056G 662 10 IC RClamp0524P.TCT
U504 056G 662 10 IC RClamp0524P.TCT
U507 056G1133913 IC M24C02-WDW6P TSSOP8
U105 056G1133913 IC M24C02-WDW6P TSSOP8
U501 056G1133913 IC M24C02-WDW6P TSSOP8
U703 056G566N600 IC NDC7002N SOT-6 FAIRCHILD
U901 056T 563 44 AME8815BEGT 250Z SOP-223
U601 056T 616913 IC TDA8932BTW HTSSOP32
U508 056T 623904 IC TS5A3157DCKR SC70
HUDSON 9 92
U502 056T 634902 IC TMDS251PAGR TQFP-64
U704 056T 647 25 IC MT5133AN QFN-48
U401 056T1126 37 IC MT5335PGU LQFP-256
U702 056T1126 40 IC MT8295AE LQFP-128
FQ409 705TQ856007 MCU ASS'Y
FQ408 705TQ856009 FLASH ASS'Y
FQ412 705TQ856019 EEPROM ASS`Y
U1 056T 627 35 IR KSM-2002TM2ES 36.7KHZ
Service Kit
Description Part No. Philips 12NC Remark
DDC KIT 715GT7113 8 FOR ALL MODEL
MSTAR ISP KIT MT538x FOR ALL MODEL
17. Different Parts List
Diversity of 220TW9FB/19 compared with 220TW9FB/00
220TW9FB/19 220TW9FB/00
Location
Philips 12NC PCM Codes Description Philips 12NC PCM Codes Description
FQ202 P44GC00181313A 22 TV PHILPS CARTON P44GC00181310C 22 TV PHILPS CARTON
HUDSON 9 93
18. General Product Specification
CONTENTS
1. SCOPE
1.1 DUCT FEATURES
1.2 MAIN DIMENSIONS / WEIGHT
1.3 LOADING QUANTITY
2 ELECTRICAL PERFORMANCE
2.1 VIDEO ELECTRICAL PERFORMANCE
2.1.1 VIDEO STANDARD TESTING CONDITIONS
2.1.2 INPUT SIGNALS
2.1.2.1 ANALOG RGB INPUTS
2.1.2.2 DDC SIGNALS
2.1.2.3 RGB INPUT SIGNAL TIMING
2.1.2.4 CVBS/S-VIDEO/COMPONENT VIDEO INPUTS
2.1.2.5 TV RF INPUTS
2.1.3 INPUT SIGNAL BLANKING
2.1.4 FACTORY PRESET MODES
2.1.5 PROTECTION CIRCUIT
2.2 AUDIO ELECTRICAL PERFORMANCE
2.2.1 AUDIO STANDARD TESTING CONDITIONS
2.2.2 AMPLIFIER CHARACTERISTIC
2.2.2.1 INTERNAL AMPLIFIER CHARACTERISTIC
2.2.3 SPEAKER CHARACTERISTIC
2.3 POWER SUPPLY
2.3.1 FEATURES
2.3.2 POWER CONSUMPTION
2.4 CONNECTORS / CONTROLS
2.4.1 CONNECTORS
2.4.2 MONITOR CONTROLS
2.4.2.1 MAIN POWER SWITCH
2.4.2.2 KEYPAD
2.4.2.3 REMOTE CONTROLLER
2.5 DDC SIGNALS (VESA DDC2B)
3 VISUAL PERFORMANCE
3.1 MEASUREMENT CONDITIONS
3.2 PICTURE SIZE AND CENTERING
3.3 Max. BRIGHTNESS
3.4 Min. BRIGHTNESS
3.5 CONTRAST RATIO
3.6 BRIGHTNESS UNIFORMITY
3.7 WHITE COLOR COORDINATES
3.8 WHITE COLOR UNIFORMITY
3.9 COLOR COORDINATE
HUDSON 9 94
3.10 VIEWING ANGLE
3.11 SURFACE TREATMENT OF FRONT POLARIZER
3.12 VIDEO PERFORMANCE
4 STANDARD ACCESSORIES
4.1 ANALOG VGA CABLE
4.2 POWER CABLE
4.3 AV CABLE
4.4 REMOTE CONTROL & BATTERY
4.5 USER MANUAL
5 RELIABILITY
5.1 MTBF
6 INTERNATIONAL STANDARDS
6.1 SAFETY
6.2 EMC.
7 ENVIRONMENTAL
7.1 ENVIRONMENTAL CONDITIONS (CLIMATIC)
7.2 ENVIRONMENTAL CONDITIONS (MECHANICAL)
8 QUALITY
8.1 DISPLAY DEFECT REQUIREMENTS
HUDSON 9 95
1. SCOPE
This short specification describes the electrical, optical and functional performance requirements for a 22 TFT LCD
with CVBS / S-Video / Component / HDMI / SCART RGB+CVBS / TV /PCMCIA /VGA compatible interface.
1.1 PRODUCT FEATURES
22 TFT LCD COLOR PANEL, 0.282(H)*0.282(V) pixel pitch.
Microprocessor controlled scan technology
Supports the European conditional access system Common Interface
PAL B/G D/K I, SECAM B/G D/K L/L TV tuning system for EU/UK Multi-system PAL, DVB-T 7M/ 8M
Universal power supply designed for worldwide application
CE certification
Audio 5W (max) x 2
Vertical refresh rate 56 to 75 Hz
Horizontal refresh rate 30k Hz to 61k Hz
1.2 MAIN DIMENSIONS / WEIGHT
TV Packed
TV
Width: Mm mm
Height: Mm mm
Depth: Mm mm
Weight: (CMO) Kg kg
1.3 LOADING QUANTITY
sets for 40 container(w. pallet )
sets for 20 container(w. pallet )
2. ELECTRICAL PERFORMANCE
2.1 VIDEO ELECTRICAL PERFORMANCE
All tests must be performed under video standard testing conditions (item 2.1.1) unless otherwise
specified
2.1.1 VIDEO STANDARD TESTING CONDITIONS
- Warm up time : >30 min.
- AC supply voltage : 110V5%, 60 3 Hz or 220V5%, 503 Hz
- Ambient temperature :15C ~35 C.
- Humidity : 25% ~ 75%
- Display mode : 1024*768, 60Hz, white window
- Contrast control : Set to factory preset value, which allows that the brightest
two of 32 linear distributed gray-scales (0 700mv) can be
distinguished.
- Brightness control : Set to factory preset value
- Picture position and size : Factory preset value
- Viewing angle 170 (Hor.) and 160 (Ver.)
- Viewing distance 150 cm for LCD performance
(FLUKE model 54200),
60 cm for LCD failures
HUDSON 9 96
Ambient illumination Dark room (< 10 lux)
Picture display 7~10 sec. from power on.
2.1.2 INPUT SIGNALS
2.1.2.1 ANALOG RGB INPUTS
Level : 0.7Vpp 10%
Polarity : Positive
Impedance : 75 Ohm
Max. dot clock : 160 MHz
Rise/Fall time : 4ns.
Jitter : 1ns
DDC : Refer to "2.1.2.2 DDC SIGNALS"
2.1.2.1.1. ANALOG RGB SYNC INPUTS
Level: L = 0V ~ 0.8V H = 2.4V ~ 5V
Separate sync. Polarity: positive or negative
The Monitor has to operate up to the following specified TTL-input signals:
H- Sync. and V Sync. signals at the monitor input
High logic level : 2.4V
Low logic level : 0.8V
Rise time : 0.8V ~ 2.4V: < 50ns
Fall time : 2.4V ~ 0.8V: < 50ns
Overshoot : 0.7V
Undershoot : 0.7V
2.1.2.2 DDC SIGNALS
VGA (15pin D-sub) connector:
DDC Serial Data: Pin 12, I
2
C-BUS
DDC Serial Clock: Pin 15, I
2
C-BUS
0.8V 0.8V
0V
2.4V
2.4V
< 0.7V
< 0.7V
< 200ns
< 200ns
< 50ns
< 50ns
HUDSON 9 97
2.1.2.3. RGB INPUT SIGNAL TIMING
Horizontal Vertical Sync Polarity Presence Screen Mode
Frequency Frequency Normal FULL Dots Lines
(kHz) (Hz)
Horizontal Vertical Horizontal Vertical
(4:3) (16:9)
720x400 31.469 70.087
NEG POS YES YES YES YES
640x480 31.469 59.94
NEG NEG YES YES YES YES
640x480 35 67
NEG NEG YES YES YES YES
640x480 37.861 72.809
NEG NEG YES YES YES YES
640x480 37.5 75
NEG NEG YES YES YES YES
800x600 37.879 60.317
POS POS YES YES YES YES
800x600 48.077 72.188
POS POS YES YES YES YES
800x600 46.875 75
POS POS YES YES YES YES
1024x768 48.363 60.004
NEG NEG YES YES YES YES
1024x768 56.476 70.069
NEG NEG YES YES YES YES
1024x768 60.023 75.029
POS POS YES YES YES YES
1152x864 63.851 70.012
POS POS YES YES YES YES
1152x870 68.7 75
NEG NEG YES YES YES YES
1280x960 60 60
POS POS YES YES YES YES
1280x960 75 75
NEG POS YES YES YES YES
1280x1024 63.981 60.02
POS POS YES YES YES YES
1680x1050 65.29 59.954
NEG POS YES YES YES YES
2.1.2.4 CVBS/S-VIDEO/ SCART /COMPONENT/HDMI /PCMCIA INPUTS
Composite Video Video system NTSC/PAL/SECAM
Amplitude 1.0Vpp (including sync )
Impedance 75 ohm terminated
S-Video Video system NTSC/PAL/SECAM
Y signal amplitude 1.0Vpp (including sync )
C signal amplitude 0.286Vpp
Impedance 75 ohm terminated
SCART (RGB) Video system NTSC/PAL/SECAM
R/G/B signal amplitude 0.7Vpp
CVBS signal amplitude 1.0Vpp (including sync )
Impedance 75 ohm terminated
SCART
(Composite)
Video system NTSC/PAL/SECAM
Amplitude 1.0Vpp (including sync )
Impedance 75 ohm terminated
HUDSON 9 98
HDMI
( EIA/CEA-861B )
Output Formats H/V Frequency Resolution
Component
1. 480 I (SDTV) 15.734K / 60 HZ 720 - 240
2. 480 P (SDTV) 31.469K / 60 720 - 480
3. 576 I (SDTV) 15.625K / 50 720 - 288
4. 576 P (SDTV) 31.250K / 50 720 - 576
5. 1080I /60 (HDTV) 33.750K / 60 1920 - 540
6. 1080I /50 (HDTV) 28.125K / 50 1920 - 540
7. 720P /60 (HDTV) 45.00 K / 60 1280 - 720
8. 720P /50 (HDTV) 37.50 K / 50 1280 - 720
9. HDMI only 1080P /60 (HDTV) 67.5K / 60 1920 - 1080
10. HDMI only 1080P /50 (HDTV) 56.25K / 50 1920 - 1080
USB 2.0 One port 5V/500 mA
2.1.2.5 TV RF INPUTS
2.1.2.5.1 TUNER SIGNAL Panasonic
(ENG37E14KF))
Receiving System PAL (B,G,D,K.L.L) DVB-T
Channel Coverage
Frequency
VHF Low band 48.25~160.00MHz
VHF High band 160.00~442.00Mhz
UHF band 442.00~863.25Mhz
IF Frequency
L L B/G D/K I
Picture Carrier 38.90 MHz 33.95MHz 38.90 MHz 38.90 MHz 38.90 MHz
Colour 34.47MHz 38.38MHz 34.47MHz 34.47MHz 34.47MHz
Sound1 32.40MHz 40.40MHz 33.40MHz 32.40MHz 32.90MHz
Sound2 - - 33.16MHz - -
NICAM 33.05MHz 39.80MHz 33.05MHz 33.05MHz 32.348MHz
Impedance : 75 ohm terminated
LEVEL : 70dBuV
2.1.2.5.2 TUNER Electrical Performance
All tests must be performed under tuner system testing conditions (item 2.1.2.7.2.1) unless otherwise
specified.
2.1.2.5.2.1 TUNER SYSTEM TESTING CONDITIONS
- Warm up time : >30 min.
- AC supply voltage : 110V5%, 603 Hz or 220V5%, 503 Hz
- Ambient temperature : 20C 5C
- Humidity : 65% 20%
- Input signal level : 65dBuV (at 75 ohms)
- Input TV system :PAL/SECAM /DVB-T
HUDSON 9 99
- Picture position and size : Factory preset value
- Viewing angle 170 H and 160 V
- Viewing distance 150 cm
Ambient illumination Light room (30~75 lux)
2.1.2.5.2.2
Noise Limited Picture Sensitivity (75)
a. Spec. VHF:51dBuV
UHF:54dBuV
b. Test pattern
Two step waveform
c. Equipment connection
d. Test channel
B/G D/K L/L
VHF-L
48.25MHz
62.25MHz
49.75MHz
93.25MHz
47.75MHz
60.50MHz
VHF-H
175.25MHz
224.25MHz
175.25MHz
223.25MHz
176.00MHz
216.00MHz
UHF
471.25MHz
663.25MHz
855.25MHz
471.25MHz
663.25MHz
855.25MHz
471.25MHz
663.25MHz
855.25MHz
HUDSON 9 100
2.1.2.5.2.3 Chroma Sensitivity (75)
a. Spec. 40dBuV
b. Test pattern
Color bar
c. Equipment connection
d. Test channel
B/G D/K L/L
VHF-L 62.25MHz 77.25MHz 63.75MHz
VHF-H 203.25MHz 207.25MHz 208.00MHz
UHF 671.25MHz 671.25MHz 671.25MHz
HUDSON 9 101
2.1.2.5.2.4 AGC STATIC Characteristic
a. Spec.
100dBuV
b. Test pattern
Color bar
c. Audio signal
1KHz / sine wave
d. Sound carrier
on
e. Input level
20dBuV ~ 100dBuV
f. Equipment connection
g. Test channel
B/G D/K L/L
VHF-L 62.25MHz 77.25MHz 63.75MHz
VHF-H 203.25MHz 207.25MHz 208.00MHz
UHF 671.25MHz 671.25MHz 671.25MHz
HUDSON 9 102
2.1.2.5.2.5 Image Rejection
a. Spec.
UHF 45 dB
b. Test pattern
Color bar
c. Input signal
Wanted signal: RF signal with sound carrier
Unwanted signal: continue waveform
d. Input signal level
Wanted signal: 70dBuV
Unwanted signal: adjustable
e. Equipment connection
f. Test channel
B/G D/K L/L
VHF-L 62.25MHz 77.25MHz 63.75MHz
VHF-H 203.25MHz 207.25MHz 208.00MHz
UHF 671.25MHz 671.25MHz 671.25MHz
HUDSON 9 103
2.1.2.5.2.6 IF Rejection
a. Spec.
-12 dB
b. Test pattern
Color bar
c. Input signal
Wanted signal : RF signal with sound carrier
Unwanted signal : continue waveform
Frequency adjustable within IF
d. Input signal level
Wanted signal : 70dBuV
Unwanted signal : adjustable
e. Equipment connection
f. Test channel
B/G D/K L/L
VHF-L 62.25MHz 77.25MHz 63.75MHz
VHF-H 203.25MHz 207.25MHz 208.00MHz
UHF 671.25MHz 671.25MHz 671.25MHz
HUDSON 9 104
2.1.3 INPUT SIGNAL BLANKING
Input signal is blanked for a period 3 second during change of source, modes or if undefined signals are
applied. No switching effects are visible.
2.1.4 FACTORY PRESET MODES
Starting the RESET function in the OSD-MENU will clear all old settings of auto configuration in
preset modes.
2.1.5 PROTECTION CIRCUIT
Missing or improper sync pulses will not damage the monitor. Additionally, under these conditions, the
monitor shall not cause damage to the driving source
2.2 AUDIO Electrical Performance
All tests must be performed under audio standard testing conditions (item 2.2.1) unless
otherwise specified
2.1.2.5.2.7 Rejection to beat of audio carrier and chroma carrier
a. Spec.
Fn-140dB
Fn+150dB
b. Test pattern
Color bar
c. Input signal
Wanted signal: RF signal with sound carrier
Unwanted signal: RF signal with sound carrier
n-1 channel and n+1 channel
d. Input signal level
Wanted signal: 50dBuV, 70dBuV, 90dBuV
Unwanted signal: adjustable
e. Equipment connection
f. Test channel
B/G PAL D/K L/L
VHF-L 62.25MHz 77.25MHz 63.75MHz
VHF-H 203.25MHz 207.25MHz 208.00MHz
UHF 671.25MHz 671.25MHz 671.25MHz
HUDSON 9 105
2.2.1 AUDIO Standard Testing Conditions
2.2.1.1 Test Equipment : Audio Analyzer test equipment
2.2.1.2 Conditions of Input Signal
1). Source Signal Impedance : 600 ohm
2). Input Signal Level : 0.5Vrms 10
3). Signal Frequency : 1 KHz
4). VOLUME : Set to Po = 5.0W
5). TREBLE / BASS : Center
6). Surround : Off
2.2.1.3 Ambient Temperature : 25 5
2.2.1.4 Warm up Time : minimum 10 minutes after power on and audio signal input
2.2.1.5 Test Distance : 150 cm from monitor screen and at the center of left and right speaker
2.2.1.6 Load Impedance : 8 ohm 15
2.2.1.7 Output Voltage : Effective output state means standard testing conditions
2.2.2 Amplifier Characteristic
2.2.2.1 Internal Amplifier Characteristic
2.2.2.1.1 Output Power ( Unit : Watt) RL = 6
1). Power Output : 5 Watts Per channel (measure the output voltage at 3 Distortion Factor)
2). Measurement method
Set Test Equipment
Meas : LEVEL , Freq : 1KHz
AMPTD : Vrms, HPF/LPF : OFF
RANGE : AUTO
Measure output voltage ( RMS)
Output calculation formula : P=V2/R
V: RMS value of output voltage P : Output Power R: Speaker Impedance
2.2.2.1.2 Power Bandwidth ( Unit : Hz)
1) Nondistorted frequency range ( -3 db) of high-pitched tone and low-pitched tone must be more
than 200 Hz 10 KHz
2). Measurement method
Surround OFF
Set DUT OUTPUT LEVEL : 8.94 Vrms, MEAS :LEVEL, REF. FREQ : 1KHz
Low frequency characteristic : measure frequency value at the 3db point while setting
frequency control to the lower frequency, relative to the output voltage 8.94 Vrms of 1KHz
High frequency characteristic : measure frequency value at the 3db point while setting
frequency control to the higher frequency, relative to the output voltage 8.94 Vrms of 1KHz.
HUDSON 9 106
2.2.2.1.3 Max. Residue HUM and Noise
1). When the sound Volume is maximum the Amplifier output must be less than 10mVrms (A)
2).Measurement method
Set Test Equipment :Meas : Level = OFF, Freq :1KHz , Range : AUTO
Read the RMS meter value
2.2.2.1.4 THD
1.) Distortion ratio is caused by a high-toned wave ( multiple of a fundamental wave) and must
less than 10.0% , 5W
2.)Measurement method
Surround OFF
Set test equipment:
MEAS : THD, @ FREQ : 1KHz , OUTPUT AMPTD : 0.5 Vrms, HPF.LPF : OFF, Range : AUTO
Read THD value
2.2.2.1.5 CHANNEL CROSS TALK
1.) Adjust volume to Vo = 8.94Vrms CROSS TALK -55dB (A) each channel
2.) Measurement method
set test equipment :
Meas. : ACV
Vin. : 0.5Vrms
Freq. : 1KHz
3.) Each empty channel must be terminated by 600
2.2.2.1.6 CHANNEL SEPARATION 30dB (A)
adjust volume to Vo = 8.94 Vrms
each empty channel must be terminated by 600 dummy and A-weighted
2.2.2.1.7 Max. Dynamic input level 1.3Vrms
Test freq. = 1KHz then increase the input level and adjustment the volume
controller
to keep Vo = 4Vrms, until the distortion factor of the Vo = 3%
the input must be 1.3Vrms
2.2.2.1.8 Max. S/N ratio 40 db(A)
Vin =0.5Vrms, f = 1KHz
Adjustment volume to Vo = 8.94Vrms (5.0 W)
2.2.2.2 AUDIO output characteristic
2.2.2.2.1 Output Signal characteristic
Output Impedance : 600 ohm
THD :< 10.0%
Ambient Temperature : 25 5
HUDSON 9 107
2.2.3 Speaker Characteristic
2.2.3.1 Internal speaker Characteristic: Refer to Specifications of internal Speaker
2.2.3.1.1 Input : Normal 5 WATT / Maximum Watt Per speaker
2.2.3.1.2 Impedance : 6 ohm 1.2 ohm at 1V ( 400 Hz)
2.2.3.1.3 Resonant Frequency ( f0):200 20% Hz at 1V
2.2.3.1.4 Frequency Response: 200 20kHz 10 dB
2.3 POWER SUPPLY
2.3.1 FEATURES
Power cord type EUROPE
A/C Line voltage range : 90 V ~ 264 V
A/C Line frequency range : 50 3Hz, 60 3Hz
Current : 2.2A max. at 90V, 1.1A max. at 264V
Peak surge current : < 40A peak at 240 VAC,
(cold starting )
Leakage current : < 0.5mA
Power line surge : No advance effects (no loss of information or defect)
with a maximum of 1 half-wave missing per second
2.3.2 POWER CONSUMPTION
The monitor is equipped with a power saving function (DPMS) for analog RGB and component
RGB input when power saving setting is active.
Standby < 0.3 W RC standby mode
There is a delay, according to the power saving setting before the transition from On-state to any
power saving state to avoid unintentionally entering of a power saving stage during display
resolution and timing mode changes. Transition from any power saving state to another can be
instantaneous.
The recovery from Off-state requires no manual power on.
Status LED behavior
Normal on White
Standby Red
RC command Flash White LED
Switch off Blank
HUDSON 9 108
MENU CH POWER
2.4 CONNECTORS / CONTROLS
2.4.1 CONNECTORS
AC Power : Monitor rear side :
Analog RGB : Monitor rear side / Data Cable : 15-pin D-sub female
Pin Assignment of 15-pin D-sub:
1 Red Video 9 VGA Power
2 Green Video 10 Sync Ground
3 Blue Video 11 Rx
4 Tx 12 Serial Data for DDC
5 Gnd 13 H-Sync.
6 Red Ground 14 V-Sync.
7 Green Ground 15 Serial Clock for DDC
8 Blue Ground
S-Video (Y/C) : Monitor rear side : 4 Pin Mini-DIN female
Composite Video : Monitor rear side : RCA female
SCART : Monitor rear side : SCART female
Audio : Monitor rear side : RCA female (Red/White) *1 set
2.4.2 MONITOR CONTROLS
2.4.2.1 MAIN POWER SWITCH
2.4.2.1.1 MAIN POWER CONTRL FUNCTION
--- POWER ON/OFF
2.4.2.2 KEYPAD
2.4.2.2.1
KEYPAD CONTROL FUNCTION
--- POWER
Turns the monitors power on and off.
--- POWER/Standby Indicator
When the power is on . White.
When the power is off Red.
--- REMOTE SENSOR Windows
Receives the signals from the remote control.
--- MENU
Sets the on-Screen Menu (OSM) mode and displays the main menu.
--- SETTING
In the on screen menu mode:
Execute the selected highlight item or level setting
HUDSON 9 109
--- MENU/CH / CH /VOL + /VOL -
In the on screen menu mode:
A) Highlight the submenu or item you wish to enter
B) Adjust the level or change the setting of the selected item
Not in the on screen menu mode:
Adjustment volume up down
2.4.2.3 REMOTE CONTROLLER
2.4.2.3.1 IR REMOTE CONTROLLER CONTROL FUNCTION
Power Press to turn on/off the TV from or to standby mode.
Prev CH Press to alternate between the currently viewed channel and previously viewed channel
(It should return to previous view if it comes from different signal source)
Channel +/ - Press to browse channels
Press to turn on TV from stand by mode
The channel number should appear on the set
Volume +/ Press to adjust the volume
Source Press repeatedly to select the signal source:
AV1/AV2/AV3/HDMI/Side/PC/TV/DVD(if applicable)
The Source List should be activated and show on OSD.
1st press displays current, subsequent presses advance
Number Key Press number button to direct access to TV channel
Press the passcode to activate the factory mode
Press to activate the Channel Lock (enter PIN code for Channel lock)
If channel list OSD active jump to that channel in the channel list (not tune the channel
until OK is pressed)
Cursor Key Press button to navigate OSD menu
Cursor right key perform confirmation as well as proceed next level of OSD
Can use cursor left to return previous level
OK Key Press button to activate the setting/selection of OSD
Press to return previous level
Press to summon channel list
MENU/EXIT Press to activate OSD menu and back to previous level of OSD
Exit OSD
MUTE Interrupt the sound or restore it.
Format Press to toggle among screen Automatic/ Panoramic / 4:3 / Movie expand / widescreen
Press to proceed commend for function which require to press blue
1st press displays current, subsequent presses advance
INFO Press to display information about the selected TV channel (Channel number, format,
signal (Sound mode), Mode (Virtual Dolby surround), CC, Analog Lang, Rating, Sleep
timer. Press again to clear info display. (Review infoscreen for content)
Press to proceed commend for function which require to press in red.
View Press to summon the favorite channel list
Press to proceed commend for function which require to press in Green
HUDSON 9 110
Check Mark Press to add or remote a channel in favorite list
Press to proceed commend for function which require to press in yellow
Sound Press repeatedly to summon the smart sound setting
1st press displays current, subsequent presses advance
Picture Press repeatedly to summon the smart picture setting
1st press displays current, subsequent presses advance
Freeze Press to freeze the current screen picture. Press again to un-freeze.
Sleep Press to show the sleep-timer slider in the right side of screen.
1st press displays current, subsequent presses advance (Loops)
2.4 DDC SIGNALS (VESA DDC2B)
This monitor is equipped with VESA DDC 2B according to VESA DISPLAY DATA CHANNEL
STANDARD 3.0 (15.12.1996).
As an alternative, it sends the EDID-file upon request by the host-system (Read EDID, Device
A0h Start address 00h) in an IC compatible format (DDC 2).
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00 : 00 FF FF FF FF FF FF 00 50 6C A3 27 57 04 00 00
10 : 35 0E 01 03 68 3C 22 78 2A 8E 60 A5 55 44 99 24
20 : 12 49 4B AD C8 00 81 C0 01 01 01 01 01 01 01 01
30 : 01 01 01 01 01 01 0E 1F 00 80 51 00 1E 30 40 80
40 : 37 00 74 E0 10 00 00 1C 00 00 00 FF 00 31 31 31
50 : 31 31 31 31 31 31 31 31 31 31 00 00 00 FD 00 38
60 : 4B 1F 32 08 00 0A 20 20 20 20 20 20 00 00 00 FC
70 : 00 4C 43 44 32 37 56 33 0A 20 20 20 20 20 00 BB
HUDSON 9 111
3 VISUAL PERFORMANCE
3.1 MEASUREMENT CONDITIONS
Warm up time: 30min.
Angle for measurement: 170H and 160V
Distance: 150cm
Equipment: MINOLTA CS-100
Measurement positions:
Grey scale definition: White means digital value for RGB=255,255,255
50% gray, RGB=127,127,127
Black, RGB=0,0,0
3.2 PICTURE SIZE AND CENTERING
For SVGA resolution the picture size is equal to the active area of the display. For
other Resolution there is a scaling algorithm which scales the picture to right size.
The display is centered with respect to the front bezel opening with a tolerance of
1.5mm
3.2.1 SIZE CONTROL RANGE
The picture size can be adjusted to achieve activation of all pixels of the display in
SVGA
Resolution, for all video and PC XGA, SVGA, VGA Text and VGA Graphics the
conditions of 3.2 can be met.
3.2.2 POSITION
CONTROL RANGE
The picture position can be adjusted that a complete picture can be displayed
centered
3.3 Max. BRIGHTNESS :
Per panel spec
Test conditions: - center of display (5)
- video input (RGB) = 0.7Vpp
- brightness control is set to max.
- contrast control is set to max.
4 3
192 640 1088
115
653
384 5
HUDSON 9 112
3.4 MIN. BRIGHTNESS :
< 33% of max Luminance ( max Luminance = max contrast + max Brightness)
Test conditions: - center of display (5)
- video input (RGB) = 0.700Vpp
- brightness control is set to min.
- contrast control is set to min..
3.5 CONTRAST RATIO :
The contrast ratio(CR) measured at center position (A) of the display for it should be
better than 700.
and is calculated according to the following formula.
Brightness of window white (A )
CR =
Brightness of black area ( B )
1/10 H
1/2 H
3.6
BRIGHTNESS UNIFORMITY
The brightness uniformity has to be better than 70% and is calculated according to
to the following formula:
Ymin
Y = [
Ymax
] X 100%
With Y1 to Y5 as the brightness values with all pixels white at the 5 measurement positions
3.7 WHITE COLOR COORDINATES
1. The white color temperature in PC Mode should be app.7500K (CIE1931: x=0.3000.015,
y=0.3100.015).
2.The white color temperature in AV/TV Mode should be app. Normal :
7500K(CIE1931:x=0.3000.015, Y=0.2900.015 ); Cool: 9300K(CIE1931:x=0.2850.015,
Y=0.2930.015 ); Warm: 6500K(CIE1931:x=0.3140.015, Y=0.3240.015 ). In this Mode,
we should check the black balance, which level is 26% of the white level (1.0Vpp).
3. The white color temperature in HDTV/HDMI Mode should be app. Normal :
7500K(CIE1931:x=0.3000.015, Y=0.2900.015 ); Cool: 9300K(CIE1931:x=0.2850.015,
Y=0.2930.015 ); Warm: 6500K(CIE1931:x=0.3140.015, Y=0.3240.015 ).
Those three channels should be factory preset and not be possible to be modified.
The measurement position is the center of the display (5) at brightness set to center and
Contrast set to max. . The tolerance of the color coordinates should be less than 0.015
A B
1/2V
1/10V
1/10H
1/2H
HUDSON 9 113
3.8
WHITE COLOR UNIFORMITY
The deviation of the white color coordinates at the 4 positions (1). (4) Should not exceed
0.030 with respect to the measurement at the center position (5).
3.9 COLOR COORDINATE
The Deviation of the color coordinates of the primary colors red/green/blue at the 4
positions(1)(4) should not exceed 0.030 with respect to the measurement at the center
position(5)
3.10 VIEWING ANGLE
Panel Horizontal view angle Vertical view angle at CR > 10
CMO 170 160
3.11 SURFACE TREATMENT OF FRONT POLARIZER
The front polarizer should have hard coating (2..3H) and anti-glare treatment.
HUDSON 9 114
3.12 VIDEO PERFORMANCE
Testing on the video input source only
3.12.1 Video-Signal INPUT (AV/S-Video/Component)
CVBS :PAL&NTSC&SECAM
Y/C :PAL&NTSC&SECAM
YCbCr :PAL&NTSC&SECAM
Level : 0 ~ 1.5Vpp
Impedance 75 Ohm
3.12.2 TESTING CONDITIONS
Pattern Checking
Gray 32 step separable level Min. 32 level
Multi burst Video Bandwidth
Amplitude response/resolution
Contains eight full screen vertical bars of
definition lines in the frequency ranges
0.8,
1.8,2.8,3.0,3.2,3.4,3.8,and 4.8 MHz This
checks the bandwidth of the video or
luminance amplifier in black and white or
color TV as well as the resolution of
monitor and video recorders
Color Bar Overall color performance
Burst keying
Subcarrier regenerator
PAL identifier circuit
Matrix circuit
RGB amplifiers
Delay color versus b/w signal
Saturation check
562.5KHz interference check
The vertical bars are white, yellow, cyan,
green, magenta, red, blue, and black.
The luminance content depends on the
TV system selected and is automatically
correct after the user makes the selection.
The color bar pattern in fact provides
sufficient information for a good overall
check on color performance. This
includes the checks on burst keying,
subcarrier regeneration, RGB amplifiers,
the delay color versus B/W signal and
saturation check
HUDSON 9 115
VCR White level
Amplitude response, resolution of
VCR and other video recorders
Linearity of chroma amplitude
Sensitivity color amplitude
Color AGC
Ratio chroma / luminance
Writing current
Recording performance
Slow/quick-motion
Still picture
Check the bandwidth, linearity, sensitivity, and
AGC of the chroma amplifiers in color video
recorders. This combined test pattern is divided
into the following four horizontal segments:
-Horizontal 100% white bar covering 1/16 field for
exact level adjustment
-Eight bars of resolution of which
2.8-3.0-3.2-3.4MHz are used to align the
high-pass
filter for a maximum resolution in VCR bandwidth
-The next part of the pattern contains eight steps
of decreasing linear levels of saturation of 100%to
0% to check the chroma amplifier linearity and
color AGC circuitry. For example, if the chroma
writing current is too high, color will be visible in
the last bar where no color should be seen
normally
-The bottom section consists of black horizontal
bar with a moving white field to check moving
pictures on video recorders
4 STANDARD ACCESSORIES
4.1 POWER CABLE
Type : Worldwide type
Length : 1.8 m + 5cm/-5cm
Color : Black
Connectors : Monitor -side : IEC 320 female
4.2 REMOTE CONTROL & BATTERY
Remote Control : 39 keys
Battery : UM-4 AAA
4.3 User manual
5 RELIABILITY
5.1 MTBF
More than 50,000 h calculated according to MIL HDBK 217E at 25
A detailed calculation is required from the vendor.
5.2 LIFETIME OF BACKLIGHT TUBES
After 50,000 Hrs the brightness is still more than 50% of the original brightness.
6 INTERNATIONAL STANDARDS
6.1 SAFETY
HUDSON 9 116
The model is designed to reach following approvals:
- CE
- TUV
6.2 EMC
The model is designed to reach following approvals:
- CE
7 ENVIRONMENTAL
7.1 ENVIRONMENTAL CONDITIONS (CLIMATIC)
Operation (according to IEC 721 / EN 60721 Class 3K3) : (unpacked for a long time)
Temperature +0C ~ + 40C
Humidity 10% ~ 85%
Max. Dew Point Temperature +27C
Max. abs. Air Humidity 25 g/m
3
Max. change of Temperature 0.5C/min
Height 3000m
Air pressure 700~1060 mbar
Dewing Not allowed
Storage (according to IEC 721 / EN 60721 Class 1K2): (unpacked for a long time)
Temperature -10C ~ + 50C
Relative Humidity 5% ~ 85%
Absolute Air Humidity 1 ~ 25 g/m
3
Max. Change of Temperature 0.5C/min. (max. 10C/30min.)
Air pressure 700~1060 mbar
Radiation Solar heat 700 W/m
2
HUDSON 9 117
7.2 ENVIRONMENTAL CONDITION (MECHANICAL)
Storage and Transport: (according to IEC 721 / EN 60721 class 2M2)
Test Procedure
IEC 68/EN 60068
Vibration Freq. range Hz 5~10, 10~100, 100~500
(random vibration) Change db/oct +12 -6
Spectral
IEC 68-2-64 acceleration m
2
/s
3
0.75
EN 60068-2-64 density
Accel. RMS m/s
2
11.4
Axis - 3
Duration/Axis Minutes 30
Free fall Weight kg 0~9.1 9.1~18.2 18.2~27.2
Fall height m 0.9 0.76 0.61
ISO 2248
EN 22248
Direction and number 1 time on 1 corner, 3 edge, 6
surface
Underground concrete
7.3 Display Inspection
White dot and Dark dot spec follow monitor panel spec.