Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

2007 Acura RL 2007 Acura RL

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

2007 Acura RL

2005-08 ACCESSORIES AND EQUIPMENT Ignition Switch - RL

2005-08 ACCESSORIES AND EQUIPMENT


Ignition Switch - RL

TEST
SRS components are located in this area. Review the SRS component locations (see COMPONENT
LOCATION INDEX ) and precautions and procedures (see PRECAUTIONS AND PROCEDURES )
before performing repairs or servicing.
1. Make sure you have the anti-theft codes for the radio system and navigation system (if equipped).
Make sure the ignition switch is OFF.
2. Disconnect the negative battery cable.
3. Remove the left front door sill trim and left kick panel (see TRIM REMOVAL/INSTALLATION DOOR AREAS ).
4. Disconnect the 6P connector from the driver's under-dash fuse/relay box.

Fig. 1: Identifying Driver's Under-Dash Fuse/Relay Box 6P Connector


5. Check for continuity between the terminals in each switch position according to the table.

me
Friday, June 05, 2009 3:25:00
3:24:56 PM

Page 1

2005 Mitchell Repair Information Company, LLC.

2007 Acura RL
2005-08 ACCESSORIES AND EQUIPMENT Ignition Switch - RL

Fig. 2: Terminals Continuity Chart


6. If the continuity checks do not agree with the table, replace the steering lock/switch.
7. Connect the negative cable to the battery.
8. Do the steering column position memorization (see STEERING COLUMN POSITION
MEMORIZATION ).
9. Enter the anti-theft codes for audio system and navigation system (if equipped), and set the clock.

me
Friday, June 05, 2009 3:24:56 PM

Page 2

2005 Mitchell Repair Information Company, LLC.

You might also like