Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 342 views

    Scantling by BKI (13092010)

    Uploaded by

    Rifqi R Dhani
    This document contains specifications for a 10.3m speedboat, including dimensions, laminate thicknesses, and materials. Key details are: - The hull has a keel plate of 13mm thickness with 13 plies, a bottom plate of 6.66mm with 7 plies, and shell plate of 6.32mm with 7 plies. - The deck and floor laminates are 6.40mm thick with 6 plies. Frames and bulkheads use 2-4 ply laminates of various dimensions. - The superstructure uses 4.00mm and 5.00mm laminates with 6 plies for its shell laminates and front wall. - Materials include gel

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Scantling by BKI (13092010)

    Uploaded by

    Rifqi R Dhani
    342 views4 pages
    This document contains specifications for a 10.3m speedboat, including dimensions, laminate thicknesses, and materials. Key details are: - The hull has a keel plate of 13mm thickness with 13 plies, a bottom plate of 6.66mm with 7 plies, and shell plate of 6.32mm with 7 plies. - The deck and floor laminates are 6.40mm thick with 6 plies. Frames and bulkheads use 2-4 ply laminates of various dimensions. - The superstructure uses 4.00mm and 5.00mm laminates with 6 plies for its shell laminates and front wall. - Materials include gel

    Original Title

    Scantling by BKI (13092010).xlsx

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains specifications for a 10.3m speedboat, including dimensions, laminate thicknesses, and materials. Key details are: - The hull has a keel plate of 13mm thickness with 13 plies, a bottom plate of 6.66mm with 7 plies, and shell plate of 6.32mm with 7 plies. - The deck and floor laminates are 6.40mm thick with 6 plies. Frames and bulkheads use 2-4 ply laminates of various dimensions. - The superstructure uses 4.00mm and 5.00mm laminates with 6 plies for its shell laminates and front wall. - Materials include gel

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    342 views4 pages

    Scantling by BKI (13092010)

    Uploaded by

    Rifqi R Dhani
    This document contains specifications for a 10.3m speedboat, including dimensions, laminate thicknesses, and materials. Key details are: - The hull has a keel plate of 13mm thickness with 13 plies, a bottom plate of 6.66mm with 7 plies, and shell plate of 6.32mm with 7 plies. - The deck and floor laminates are 6.40mm thick with 6 plies. Frames and bulkheads use 2-4 ply laminates of various dimensions. - The superstructure uses 4.00mm and 5.00mm laminates with 6 plies for its shell laminates and front wall. - Materials include gel

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 4
    At a glance
    Powered by AI
    The document discusses the scantling calculation for a fiberglass speed boat according to BKI 1996 rules. It provides specifications for dimensions, thicknesses and laminate layups for different parts of the boat.

    The document mentions laminates like single skin, deck laminates, bulkhead laminates, frames, beams and super structure laminates.

    The document describes components like the hull, deck, bulkhead, frames, super structure and tank.

    Ukuran Utama

    Loa = 10.3 m
    Lwl = 10 m
    Bmld = 3.2 m
    Depth = 1.2 m
    Drafth = 0.45 m
    NO. SIZE UNIT LAMINATING
    I. BOTTOM SHEEL PLATING
    1.1 Keel plate.
    Single skin :
    thickness ( tk ) = 9 + 0.4 L ( mm )
    tk = 13 mm 13 mm
    1.2 Bottom plate.
    thickness ( tb ) = 15.8.a ( T+0.026L )^0.5 mm
    tb = 6.66 mm 6.66 mm
    a = 0.5
    1.3 Shell plate.
    thickness ( ts ) = 15.a ( T+0.026L )^0.5 mm
    ts = 6.32 mm 6.32 mm
    II. Deck Laminates
    2.1 Single Skin
    a. ruang kemudi
    Thickness ( td ) = 13. a (p)^0.5 mm
    td = 4.41 mm 4.41 mm
    p = 0.46 [ t/m
    2
    ]
    b. midship
    Thickness ( td ) = 18.2 a (p)^0.5 mm
    td = 6.40 mm
    p = 0.26 [ t/m
    2
    ]
    p = 0.051 L + 0.46 depan midship
    = 0.97 [ t/m
    2
    ]
    p = 0.027 L + 0.46 belakang midship
    = 0.73 [ t/m
    2
    ]
    p = 0.97 6.40 mm
    SCANTLING CALCULATION SPEED BOAT FIBREGLASS
    According Rules B.K.I 1996 FRP
    I T E M
    G+3M300+5M45O+4W
    R800
    G+2M300+3M450+2W
    R800
    G+2M300+2M450+2W
    R800
    G+M300+2M450+1WR
    800
    NO. SIZE UNIT LAMINATING
    III. Bulkhead Laminates
    3.1 Single skin
    thickness (tf) = 12.a. (h)^0.5
    tf = 4.87 4.87 mm
    h = 0.66 m
    3.2 bulkhead stiffeners
    W = C a. h. l^2 cm
    3
    C = 44
    l = 0.465 m
    W = 5.71 cm
    3
    5.71 mm 2M450+2R800
    Profile = 60 x 60 (2M450+2R800) U 60 x 60 mm
    IV. Frames
    4.1 Transverse frames
    Section modulud ( W ) = 32.a.h.l^2 (cm
    3
    )
    l = 0.6 m
    h = 1.400 m
    T =
    a = 0.5 m
    W = 8.06 cm
    3
    Profile = 100 x 80 (2M450+2R800) U 100 x 80 mm 2M450 + 2WR 800
    4.2 Side longitudinal
    Section modulus ( W ) = 49.a.h.l^2 (cm
    3
    )
    W = 8.575 cm
    3
    Profile = 100 x 70 (2M450+R800) U 100 x 70 mm 2M450 + WR 800
    4.3 Girder
    Side Girder
    Thickness ( t ) = 0.3L + 3.5 (mm)
    tf = 3.2L + 24 mm
    = 56 mm
    t = 6.5 mm
    Profile = 100 x 70 (3M450+R800) U 100 x 70 mm 3M450 + WR 800
    4.4 Floors
    Depth (h) = 62.5 b
    h = 200 mm
    t = 0.4 L mm
    = 4 mm
    W = 15,4.a.H.b^2 cm
    3
    = 14.98112 cm
    3
    Profile = 100 x 80 (2M450+2R800) U 100 x 80 mm 2M450 + 2WR 800
    NO. SIZE UNIT LAMINATING
    4.5 Beams
    a Transverse beam
    Section modulus ( W ) = C.a.p.l^2 ( cm
    3
    )
    C = 28
    l = 0.75
    p = 0.033 L + 0.46 bagian depan
    = 0.79 [ t/m
    2
    ]
    W = 6.22 cm
    3
    Profile = 60 x 80 (2M450+R800) U 60 x 80 mm 2M450 + WR 800
    p = 0.016 L + 0.46 midship ke belakang
    = 0.620 [ t/m
    2
    ]
    W = 4.88 cm
    3
    Profile = 60 x 60 (2M450+R800) U 60 x 60 mm 2M450 + WR 800
    b Longitudinal beams
    Section modulus ( W ) = C.a.p.l^2 ( cm
    3
    )
    C = 33
    W = 7.33 cm
    3
    U 60 x 60 mm 2M450 + WR 800
    V. Super Structure
    5.1 Sheel laminates
    Side & after wall thickness ( ts) =
    ts = 4.00 mm 4.00 mm M300+ 3M450+R800
    from table 16.1
    5.2 Front wall thickness (tf)
    tf = 5.00 mm 5.00 mm M300 + 4M450 + R 800
    from table 16.1
    5.3 stifenner
    profile 50 x 50 U 50 x 50 mm 2M450 + WR 800
    from table 16.1
    I T E M
    I T E M
    G+M300+2M450+2WR
    800+plw 9
    NO. ITEM SIZE UNIT MATERIAL LAPISAN
    I. HULL
    1 Keel Plate 13 mm G+3M300+5M45O+4WR800 13 ply
    2 Bottom Plate 6.66 mm G+2M300+3M450+2WR800 7 ply
    3 Shell Plate 6.32 mm G+2M300+2M450+2WR800 7 ply
    II. DECK & FLOOR
    1 Deck & Floor laminates 6.40 mm G+M300+2M450+1WR800 6 ply
    2 Stiffeners U 100 x 80 mm x mm 2M450 + 2WR 800 4 ply
    III. BULKHEAD
    1 Construction 5.71 mm G+M300+2M450+2WR800+plw 9 6 ply
    2 Bulkhead stiffeners U 60 x 60 mm x mm 2M450+2R800 5 ply
    IV. FRAMES
    1 Transverse frames U 100 x 80 mm x mm 2M450 + 2WR 800 4 ply
    2 Side longitudinal U 100 x 70 mm x mm 2M450 + WR 800 3 ply
    3 Girders U 100 x 70 mm x mm 3M450 + WR 800 3 ply
    4 Transverse beam U 60 x 80 mm x mm 2M450 + WR 800 3 ply
    5 Longitudinal beam U 60 x 60 mm x mm 2M450 + WR 800 3 ply
    V. TANK Stainless steel 3 mm
    VI. SUPERSTRUCTURE
    1 Shell laminates 4.00 mm M300+ 3M450+R800 6 ply
    2 Front Wall 5.00 mm M300 + 4M450 + R 800
    3 Stiffeners U 50 x 50 mm x mm 2M450 + WR 800
    DAFTAR LAMINASI
    Keterangan
    SYMBOL NAME NOTE
    M 300 Chopped strana mat 300 gr / m
    M 450 Chopped strana mat 450 gr / m
    WR 800 Woven roving 800 gr / m
    G Gelcoat
    Plw Plywood WBP

    You might also like