Operation Instructions...................................................................................................................................................1 Unpacking Instructions .................................................................................................................................................2 Safety Precautions...........................................................................................................................................................2 Front View of the Product ............................................................................................................................................3 Rear View of the Product ..............................................................................................................................................4 Quick Installation .............................................................................................................................................................5 Basic Operation and Calibration/Reset Instructions...........................................................................................6 Advanced OperationOSD Menu............................................................................................................................8 Supporting Timing Modes ........................................................................................................................................ 11 Technical Information ................................................................................................................................................. 12 Wall-Mount Installation Instructions..................................................................................................................... 13 Troubleshooting............................................................................................................................................................ 14 Product Registration and Technical Support..................................................................................................... 15
Operation Instructions Thank you for purchasing the PXL2430MW multi-touch LED monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LED Monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation. This Touchscreen LED Monitor generates, uses, and can radiate radio frequency energy. Harmful interference to radio communication may be the result if its not properly installed and used. However, there is no guarantee that interference will not occur in a particular installation. If this Touchscreen LED Monitor does cause serious interference to radio or television reception, resetting may correct it. Moreover, users are encouraged to reduce interference by doing one or more of the following:
English
Reorient or relocate the receiving antenna.
Move the Touchscreen LED Monitor and the receiver further away from each other. Connect the Touchscreen LED Monitor into an outlet on a circuit different from that to which the receiver is connected. Consult your local dealer or a qualified technician. FCC Warning: To assure a continued FCC compliance, a user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized changes or modifications to this Touchscreen LED Monitor would void the users authority to operate this device. Note: If necessary, shielded interface cables and AC power cord must be used to meet the emission level limits.
According to WEEE regulation, this Touchscreen LED Monitor can't be handled as normal trash in Europe when it is out of usage. Please refer to the recycle information on Planars website to handle it. For more information on how to recycle your product, please visit WWW.PLANARSYSTEMS.COM/GREEN 1
Unpacking Instructions Move the LED Monitor out of the package and take off the plastic bag and Polystyrene Foam. Pull the base from Parallel versus Panel to Vertical. Adjust the Panel between 0 leaning forward and 20 leaning backward.
Safety Precautions Follow all warnings, precautions and maintenance as recommended in this users manual to maximize the life of your unit. Do: Turn off the product before cleaning. Touch screen surface may be cleaned using a soft clean cloth moistened with mild window glass commercial cleaners or 50/50 mixture of water and isopropyl alcohol. Use a soft cloth moistened with mild detergent to clean the display housing.
Dont: Do not touch the LED Display screen surface with sharp or hard objects. Do not use abrasive cleaners, waxes or solvents for your cleaning. Do not operate the product under the following conditions: o Extremely hot, cold or humid environment. o Areas susceptible to excessive dust and dirt. o Near any appliance generating a strong magnetic field. o In direct sunlight. If smoke, abnormal noise or odor emits from your Touchscreen LED Monitor, remove the power cord immediately and call your service center. Never remove the rear cover of your Touchscreen LED Monitor. The display unit inside contains high-voltage parts and may cause electric shock. Never try to repair your Touchscreen LED Monitor yourself. Always call your service center or a qualified technician to fix it.
English
Disconnect the power plug from AC outlet if the product is not going to be used for an extended period of time.
Front View of the Product
English
Touch Pen Slot
OSD Turn On/ Off
Volume Adjust/ Scroll Down/ Adjust Decrease
Preset Mode/ Scroll UP/ Adjust Increase
Input select/ Confirm Selection
LED Indicator
Power On/ Off
Rear View of the Product
English
Power Input
USB - Type A to B
Headphone Jack
Audio Input
HDMI input (HDMI 19 pin)
DVI Input (DVI 24 pin)
VGA Input (D-Sub 15 pin)
Quick Installation 1. 2. 3. 4. 5. 6.
Connect either VGA, DVI or HDMI Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. Connect the audio cable from audio output of computer to the audio input of the monitor. Connect the USB cable from the computer to the monitor. Connect power cord to a properly grounded AC outlet, and then to the monitor. Power-ON computer and then POWER-ON the monitor. Set the timing mode on your computer. Recommended resolution and refresh rate is 1920 x 1080 @ 60Hz.
Figure 1:
PC
English
Audio cable USB 2.0 cable
DVI cable VGA cable
Power cable
HDMI cable (not supplied)
Basic Operation and Calibration/Reset Instructions
Before using the Touchscreen LED Monitor: Connect external equipment properly. Insert the power plug, and the power LED indicator will light orange.
Power On/Off To turn the Touchscreen LED Monitor on/off: Press POWER button on the front. The power LED indicator light will be blue when the Touchscreen LED Monitor is on.
Using the OSD Menu
Use OSD menus to adjust settings by using the menu button on the front of the Touchscreen LED Monitor. 1
Exits from OSD menu
Selects between VGA, DVI, HDMI or Auto mode Select the desired item when in OSD menu When not in OSD menu, directly enters Volume adjust Select the desired item when in OSD menu When not in OSD menu, directly enters Preset Mode Recalls both Contrast and Brightness (when not in OSD menu)
OSD Lock Out Function
When Touchscreen LED Monitor is in normal mode, the OSD Lock Out function can be enabled. Option 1: OSD lock all 4 buttons are locked except the POWER button. Press and hold the 1 button and the button for 10 seconds to lock the OSD buttons. The Touchscreen LED Monitor will show an OSD Lock Out message for 3 seconds and the message will disappear automatically.
Repeat this step to unlock.
English
Displays main menu
Option 2: OSD & Power button lock all 5 buttons including the POWER button are locked. Press and hold the 1 button and the button for 10 seconds to lock all 5 buttons. The Touchscreen LED Monitor will show a Lock Out message for 3 seconds and the message will disappear automatically.
Repeat this step to unlock.
PX2430MW Calibration/Reset Instructions:
English
The PX2430MW is available with USB connection. It is Microsoft Windows 7 HID (Human Interface Device) compatible if you use the USB touch screen interface. No additional software driver is required. Calibration is a simple process and can be invoked by running Tablet PC Settings from Control Panel and clicking the Calibrate button. Click the Reset button to reset the touchscreen to the factory calibration settings. To reset the existing calibration data, click "Reset" in the Tablet PC Settings window.
Advanced OperationOSD Menu
You can use the OSD menu to adjust various settings for your Touchscreen LED Monitor. Press the 1 button to display the OSD Menu, and use to select the desired OSD menu.
English
Short Cuts Function from the button(s)
Auto Image Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. Contrast: To adjust the foreground white level of screen image. : increase contrast, : decrease contrast. Brightness: To adjust the luminance of the video. : increase brightness, : decrease brightness. ECO Mode: Allows the user to turn the ECO On or Off. Contrast and Brightness adjustment disabled when ECO is active. Input Select: When Input Select is pressed, change Input signal to VGA, DVI, HDMI or Auto. Audio Adjust: To adjust the audio functions. Volume: To adjust the volume of speaker output. Mute: To turn the Mute ON/OFF. 8
Color Adjust: To select the color for improving brightness and color saturation between 9300K, 6500K, 5400K, and User Color. 9300K: Adds blue to screen image for cooler white. 6500K: Adds red to screen image for warmer white and richer red. 5400K: Adds green to screen image for a darker color. User Color: Individual adjustments for red (R), green (G), blue (B). 1. Press button 2 to select the desired color. 2. Press or button to adjust selected color. Information: To display the information, regarding the current input signal coming from the graphic card in your computer. Note: See your graphic card user guide for more information about changing the resolution and refresh rate. Manual Image Adjust: To manually adjust the Horizontal Size, H. /V. position, Fine Tune, Sharpness, Video Mode adjust and Preset Mode.
English
Horizontal Size: To adjust the width of the screen image.
: decrease the width of screen image, : increase the width of screen image. H./V. Position: To adjust the horizontal and vertical position of the video. H. Position: : move screen to the right, : move screen to the left. V. Position: : move screen up, : move screen down. Fine Tune: To adjust the delay time of data and clock. Press or to adjust to your preference. Sharpness: To adjust the clarity of a non-Full HD Resolution (1920x1080) signal with or button. Video Mode Adjust: To select the video mode from Full Screen, Over Screen or Aspect Ratio. Full Screen: To select full-screen size image. Over Screen: To select over-screen size image. Warning: Over Screen may cause deviation in touch accuracy. If this occurs, we recommend using Full screen.
Aspect Ratio: To select input timing image size.
Preset Mode: Provides an optimum display environment depending on the contents displayed. It contains 5 user-selectable presets. Standard is for general windows environment and monitor default setting. Game optimized for PC game environment. Cinema optimized for movie and video environment. Scenery optimized for displaying outdoor scenery images. Text optimized for text editing and viewing in a word processing environment. 9
Setup Menu: To set up Language, OSD Position, OSD Time Out and OSD Background. Language Select: To allow users to choose from available languages. OSD Position: Press or button to select between horizontal and vertical OSD Position adjustment. H. Position: To horizontally adjust the OSD position. : move OSD to the right, : move OSD to the left. V. Position: To vertically adjust the OSD position. : move OSD up, : move OSD down. OSD Time Out: To automatically turn off On Screen Display (OSD) after a preset period of time. OSD Background: Allows the user to turn the OSD background On or Off.
10
English
Memory Recall: To recall factory settings for Video & Audio controls. Press button 2 to select the Memory Recall menu option.
Supporting Timing Modes
English
STANDARD VGA VGA MAC VESA VESA VESA VESA VESA VESA MAC VESA VESA VESA VESA VESA MAC VESA VESA VESA CVT VESA VESA VESA
RESOLUTION 720 x 400 @ 70Hz 640 x 480 @ 60Hz 640 x 480 @ 67Hz 640 x 480 @ 72Hz 640 x 480 @ 75Hz 800 x 600 @ 56Hz 800 x 600 @ 60Hz 800 x 600 @ 72Hz 800 x 600 @ 75Hz 832 x 624 @ 75Hz 1024 x 768 @ 60Hz 1024 x 768 @ 70Hz 1024 x 768 @ 75Hz 1280 x 960 @ 60Hz 1152 x 864 @ 75Hz 1152 x 870 @ 75Hz 1280 x 1024 @ 60Hz 1280 x 1024 @ 75Hz 1440 x 900 @ 60Hz 1400 x 1050 @ 60Hz 1600 x 1200 @ 60Hz 1680 x 1050 @ 60Hz 1920 x 1080 @ 60Hz
Note: 1. DVI and HDMI supports 480i, 480p, 576i, 576p, 720p, 1080i, and 1080p. 2. Simultaneously press 1 and 2 keys on monitor panel to switch between similar PC timings. Similar PC Timing on list below: 720 x 400 @ 70Hz / 640 x 400 @ 70Hz
1400 x 1050 @ 60Hz / 1680 x 1050 @ 60Hz
Warning: Do not set the graphic card in your computer to exceed these maximum refresh rates. Doing so may result in permanent damage to your monitor.
11
Technical Information Panel
23.6 TFT (with LED backlight)
Power Management
On: 21 Watts (typical), 40 Watts (maximum)
Standby Mode: < 0.5 Watt Off: < 0.5 Watt Full HD 1920 x 1080 max. Vertical Frequency 60Hz max.
Pixel Dimension
0.2715 x 0.2715 mm
Display Color
16.7M
Tilt
4 (+3/-3) ~ 40 (+3/-3)
Active Display Area
521.28 mm x 293.22 mm
Temperature
Operating: 0C ~ +40C Storage: -20C ~ + 60C
Compliance
FCC-B, CE, UL/cUL, CCC
Power
Input Voltage AC100-240 V
Speaker
2W x 2 (typical)
Touchscreen Technology
Optical Touch
Touchscreen Interface
USB
Touch Method
Finger(s) and stylus input
Supported O/S
Microsoft Windows 7
12
English
Displayable Resolution
Wall-Mount Installation Instructions
Wall Mount Arm not included Turn the power OFF then disconnect the cables from the Touchscreen LED Monitor before performing the procedure below. 1. Lay the Touchscreen LED Monitor face down on a soft surface. 2. Remove the two pieces of flake and Hinge Cover. 3. Remove the two screws under the flake. 4. Remove the stand. 5. Follow instructions included with the Wall Mount kit. NOTE
100mmx100mm VESA hole pattern (n=4), M4, pitch =0.7 mm
English
100mm x 100mm Screw
Mounting Options
13
Troubleshooting No power Make sure A/C power cord is securely connected to the power adapter and the power supply is firmly connected to the Touchscreen LED Monitor. Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage. Make sure all signal cables are installed. Power on but no screen image Make sure the video cable supplied with the Touchscreen LED Monitor is tightly secured to the video output port on back of the computer. If not, tightly secure it. Adjust brightness.
14
English
Wrong or abnormal colors
If any colors (red, green, blue) are missing, check the video cable to make sure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection. Connect the Touchscreen LED Monitor to another computer.
Product Registration and Technical Support
Register Your Planar Products Today Thank you choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support/product_registration.html
Cables, Replacement Lamps, Accessories
To find cables, replacement lamps and accessories for your Planar projector, LCD monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com or find other stores who carry Planar products at http://www.planar.com/howtobuy
Technical Support
English
Visit Planar at http://www.planar.com/support for product registration, operations manuals,
touch screen drivers, warranty information and access to Planar's Technical Library for online troubleshooting. To speak with Planar Customer Support please have you model and serial number available and dial: Planar Support Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US. Hours: 24 hours a day, 7 days a week. Toll or long distance charges may apply.
PX2430MW/ USBPX2430MWUSBPX2430MWMicrosoft Windows 7 HID PC PC
OSD OSD 1 OSD OSD
: : : : : : ECO Mode ECO ECO
VGA DVI HDMI :
: 9300K6500K5400K
9300K 6500K 5400K RGB 1. 2 2. : : : /
: : : /: : : : : : : :
: Full HD (1920x1080) : Full ScreenOver Screen Full Screen: Over Screen: Over ScreenFull Screen
: 5 Windows PC
: : : OSD : OSD : OSD: OSD : OSD : OSD: OSD : : 2
10
VGA VGA MAC VESA VESA VESA VESA VESA VESA MAC VESA VESA VESA VESA VESA MAC VESA VESA VESA CVT VESA VESA VESA
720 x 400 @ 70Hz
640 x 480 @ 60Hz 640 x 480 @ 67Hz 640 x 480 @ 72Hz 640 x 480 @ 75Hz 800 x 600 @ 56Hz 800 x 600 @ 60Hz 800 x 600 @ 72Hz 800 x 600 @ 75Hz 832 x 624 @ 75Hz 1024 x 768 @ 60Hz 1024 x 768 @ 70Hz 1024 x 768 @ 75Hz 1280 x 960 @ 60Hz 1152 x 864 @ 75Hz 1152 x 870 @ 75Hz 1280 x 1024 @ 60Hz 1280 x 1024 @ 75Hz 1440 x 900 @ 60Hz 1400 x 1050 @ 60Hz 1600 x 1200 @ 60Hz 1680 x 1050 @ 60Hz 1920 x 1080 @ 60Hz
1. DVI HDMI 480i480p576i576p720p1080i 1080p
2. 1 2 PC Timing PC Timing 720 x 400 @ 70Hz / 640 x 400 @ 70Hz
