Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 646 views

    ABS HI 121 Material

    Uploaded by

    lenderahul1705
    gfvsdgb

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    ABS HI 121 Material

    Uploaded by

    lenderahul1705
    646 views2 pages
    gfvsdgb

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    gfvsdgb

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    646 views2 pages

    ABS HI 121 Material

    Uploaded by

    lenderahul1705
    gfvsdgb

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Page 1 of 2

    LG Chemical America Inc


    LG ABS HI-121
    ABS 1/8/2003

    Product text
    Additional Properties:
    Melt Flow Rate, ASTM D1238, 200 °C/5kg: 1.5 g/10min
    Melt Flow Rate, ASTM D1238, 230 °C/3.8kg: 5.3 g/10min

    Properties
    General
    Recycled Content l No
    Material Status l Commercial: Active
    Availability l North America
    Features l Impact Resistance, Good
    Forms l Pellets
    Processing Method l Injection Molding
    Physical Nominal Values Test
    Specific Gravity 1.05 - ASTM D792
    Melt Flow Rate 15 g/10 min ASTM D1238
    Melt Flow Condition 220°C/10.0 kg -
    Mold Shrink, Linear-Flow 4 -7 mil/in ASTM D955
    Mechanical Nominal Values Test
    Tensile Strength @ Yield 6800 psi ASTM D638
    Tensile Elongation @ Brk 25 % ASTM D638
    Flexural Modulus 327000 psi ASTM D790
    Flexural Strength 10700 psi ASTM D790
    Impact Nominal Values Test
    Notched Izod Impact (High) 6.4 ft-lb/in ASTM D256
    Notched Izod Temperature 73 °F
    Notched Izod Thickness 0.125 in
    Hardness Nominal Values Test
    Rockwell Hardness R 101 - ASTM D785
    Rockwell Scale R -Scale -
    Thermal Nominal Values Test
    DTUL @264psi - Unannealed 196 °F ASTM D648
    Vicat Softening Point 208 °F ASTM D1525
    Flammable Nominal Values Test
    Flame Rating - UL, HB 0.0625 in UL 94
    Injection Nominal Values Test
    Drying Temperature 175-195 °F
    Drying Time 2 -3 h
    Rear Temperature 375-410 °F
    Middle Temperature 390-430 °F

    about:<html><body%20bgcolor=#FFFFFF></body></html> 1/8/2003
    Page 2 of 2

    Front Temperature 410-445 °F


    Nozzle Temperature 410-445 °F
    Processing (Melt) Temp 430-465 °F
    Mold Temperature 140-195 °F
    Injection Pressure 9950-14200 psi
    Back Pressure 0.0001-570 psi
    Screw Speed 40-60 rpm

    Copyright ©, 2001 IDES, Inc. http://www.ides.com


    The information presented on this data sheet was acquired by IDES, Inc. from various sources, including the producer of the
    material and recognized testing agencies. IDES makes substantial efforts to assure the accuracy of this data. However, IDES
    assumes no responsibility for the data values and urges that upon final material selection, data points are validated with the
    manufacturer.

    about:<html><body%20bgcolor=#FFFFFF></body></html> 1/8/2003

    You might also like