Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
157 views

Basic Engineering Design Process

The document outlines the basic engineering design process, which consists of 7 main steps: 1) identifying the problem and scope, 2) site investigation, 3) collecting design data, 4) assembling and analyzing data, 5) design, 6) preparing plans and specifications, and 7) reviewing and approving the plan. An engineering design includes drawings, construction specifications, an operation and maintenance plan, and other documents. The goal is to produce clear, concise, neat, and legible designs. Standard drawings should be used whenever possible.

Uploaded by

trau-nuoc
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
157 views

Basic Engineering Design Process

The document outlines the basic engineering design process, which consists of 7 main steps: 1) identifying the problem and scope, 2) site investigation, 3) collecting design data, 4) assembling and analyzing data, 5) design, 6) preparing plans and specifications, and 7) reviewing and approving the plan. An engineering design includes drawings, construction specifications, an operation and maintenance plan, and other documents. The goal is to produce clear, concise, neat, and legible designs. Standard drawings should be used whenever possible.

Uploaded by

trau-nuoc
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 17

Basic Engineering Design

Process
Chris Hamilton, P.E.
Assistant State Conservation Engineer
2008 ICE Training

What is an Engineering Design?

An orderly process of collecting, recording,


and analyzing all the facts and data
needed to arrive at a satisfactory solution
to a problem.
NEM-VA501.09 through VA501.19 outlines
the policy for performing engineering work
for NRCS in Virginia.
EFH, Chapter 5 Preparation of
Engineering Plans

Preparing an Engineering Design

The following basic steps should be


followed for all engineering designs
(regardless of complexity):
1.
2.
3.
4.
5.
6.
7.

Identification of the problem and its scope.


Site Investigation.
Collection of basic design data.
Assembly and analysis of data.
Design.
Preparation of plans and specifications.
Review and approval of plan.

Basic Engineering Design

What is an engineering design (the final product)


made up of?
Drawings:

Coversheet
Plan View Sheet
Standard Detail Sheet
Cross-Section or Profile Sheet

Construction Specifications
O&M Plan
Miscellaneous

Bill of Materials
Cost Estimate

The landowner (or cooperator) should be given a


copy of all of this!!!

Construction Drawings

Should be:
Clear
Concise
Neat
Legible

CAD is a tool, not required.


Goal is productionnot a chance to
be an artist.

Standard Engineering Coversheet

Required on all engineering designs.

Location map should


provide sufficient
information so that
someone unfamiliar with
the job can locate the site
(not the same as the plan
view)

Plan View Sheet

Plan view should show the detailed


layout of the proposed practice,
topographic features, dimensions, etc.

Use Standard Drawings Whenever Possible

Available designs include


various types of watering
troughs, livestock shade
structures, temporary waste
pads, stream crossings,
spring developments, pole
structures and waterways.

Cross Section Sheet

Cross sections are typically


perpendicular to a baseline or
centerline (road, stream, etc.)

Used for showing existing ground and


design slopes, elevations, grade
changes, structure details, etc.

Profile Sheet

Profiles are typically along or parallel


to a baseline or centerline (road,
stream, etc.)

Used for showing existing ground and


design slopes, elevations, grade
changes, structure details, etc.

Construction Specifications

O&M Plan

Bill of Materials & Cost Estimate

Basic Engineering Design

What should be kept in the job folder?


Copy of design (everything given to landowner
or cooperator).

Coversheet should be signed by NRCS representative,


landowner, and contractor prior to construction.

Field notes, before and after construction.


Design notes & computations.

See NEM VA501.16 Technical Quality.

Photographs, before and after construction.


As-built drawings and notations.
See Design Data and Check Data under
applicable practice standards for required data.

Basic Engineering Design

Why supply the information previously


mentioned?
To comply with Conservation Practice
Standards.
To maintain technical and professional
quality.
At the direction of the State Conservation
Engineer.

Operating under his technical supervision and


P.E. license.

In Review

What is the first step of any


engineering design?
Should the cooperator receive a copy
of the final design?
Is drafting the construction drawings
in CAD a requirement?

Questions?

You might also like