AutoCAD 2014 is a popular 2D CAD software used for architectural, engineering, construction, and manufacturing design. The document outlines the graphical user interface of AutoCAD and how to use various drawing tools like lines, circles, arcs, and polygons using both absolute and relative coordinate systems. It also covers modification tools, hatching, units, arrays, and other functions like fillets, chamfers, and the design center.
AutoCAD 2014 is a popular 2D CAD software used for architectural, engineering, construction, and manufacturing design. The document outlines the graphical user interface of AutoCAD and how to use various drawing tools like lines, circles, arcs, and polygons using both absolute and relative coordinate systems. It also covers modification tools, hatching, units, arrays, and other functions like fillets, chamfers, and the design center.
AutoCAD 2014 is a popular 2D CAD software used for architectural, engineering, construction, and manufacturing design. The document outlines the graphical user interface of AutoCAD and how to use various drawing tools like lines, circles, arcs, and polygons using both absolute and relative coordinate systems. It also covers modification tools, hatching, units, arrays, and other functions like fillets, chamfers, and the design center.
AutoCAD 2014 is a popular 2D CAD software used for architectural, engineering, construction, and manufacturing design. The document outlines the graphical user interface of AutoCAD and how to use various drawing tools like lines, circles, arcs, and polygons using both absolute and relative coordinate systems. It also covers modification tools, hatching, units, arrays, and other functions like fillets, chamfers, and the design center.
Start > All Programs > Autodesk > AutoCAD 2014 - English > AutoCAD 2014 - English
AUTO CAD 2D & 3D
Graphical User Interface
Title Bar Draw Toolbar Tool Bar Navigation Cube Drawing Area
UCS Icon Layout Tabs
Cross Hair
Command Panel Status Bar
Navigation Bar
Coordinate Systems
Absolute Co-ordinate System
(X,Y)
Relative Rectangular Co-ordinate System
(@X distance, Y distance)
Relative Polar Co-ordinate System
(@distance < Angle)
Absolute Co-ordinate System (X,Y)
Click on the Line button in the Draw Tool bar or
Command : LINE (press Enter)
Specify Start Point : 0,0
Specify Next Point : 8,0
Specify Next Point : 8,5
Specify Next Point : 0,5
Specify Next Point : 0,0
You will get a 8x5 Rectangle
Relative Rectangular Coordinate
System (@X distance, Y distance)
Click on the Line button in the Draw Tool bar
Start point : Click at any point in the screen
Next Point :@8,0
Next Point : @0,5
Next Point : @-8,0
Next Point : @0,-5
Relative Polar Co-ordinate
System (@distance<Angle)
Click Draw > Line
Start Point : Click at any point Next Point : @2<0 Next Point : @2<60 Next Point : @2<120 Next Point : @2<180 Next Point : @2<240 Next Point : @2<300 Type Close
Units & Limits
Type units on Command bar Select the Type & Units Click OK
Decimal > Millimeters
Architectural > Inches
Draw Tools
Circle
Arc
Polygon
Inscribed Polygon
Circumscribed Polygon
Edge
Ellipse
Hatch
Detail About Object
Click view on Title Bar and go to user interface Click Toolbars > AutoCAD Select the Inquiry Click on the List icon Select the Circle Press Enter You will get :
Modify Tools
Move
Copy
Stretch
Rotate
Mirror
Note : If you want to delete the source object press Y, but its not recommended.
Scale
Trim & Extend
TRIM
EXTEND
Select Cutting Edge, Press
Enter
Select Boundary Edge, Press
Enter
Specify object to trim
Specify object to extend
want to trim)
(side you
Fillet, Chamfer & Blend
Curves
Array
Design Center Click insert on Title Bar and go to Content
