Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 7 views

    Vendor: M/S, Dynamic SS Engg. Item: Electric Gantry STR For Slewing Stacker, MKD NO:D, DRG - NO: 012117-M-BM-EQ-GA-3124, R-1

    Uploaded by

    Kavin Prakash
    The document summarizes inspection reports for three engineering assemblies: 1) An electric gantry structure was found to have measurement and welding issues that require non-destructive testing and corrections before dismantling. 2) A buffer mounting arrangement was dimensionally checked and found to need rectification of a measurement before machining and confirmation of an item designation. 3) Six tubular drive shafts were inspected and found to have an arc strike on one pipe and need verification of a weld category between pipes and end shafts, with other measurements satisfactory.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Vendor: M/S, Dynamic SS Engg. Item: Electric Gantry STR For Slewing Stacker, MKD NO:D, DRG - NO: 012117-M-BM-EQ-GA-3124, R-1

    Uploaded by

    Kavin Prakash
    7 views2 pages
    The document summarizes inspection reports for three engineering assemblies: 1) An electric gantry structure was found to have measurement and welding issues that require non-destructive testing and corrections before dismantling. 2) A buffer mounting arrangement was dimensionally checked and found to need rectification of a measurement before machining and confirmation of an item designation. 3) Six tubular drive shafts were inspected and found to have an arc strike on one pipe and need verification of a weld category between pipes and end shafts, with other measurements satisfactory.

    Original Title

    Attachment.docx

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes inspection reports for three engineering assemblies: 1) An electric gantry structure was found to have measurement and welding issues that require non-destructive testing and corrections before dismantling. 2) A buffer mounting arrangement was dimensionally checked and found to need rectification of a measurement before machining and confirmation of an item designation. 3) Six tubular drive shafts were inspected and found to have an arc strike on one pipe and need verification of a weld category between pipes and end shafts, with other measurements satisfactory.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    7 views2 pages

    Vendor: M/S, Dynamic SS Engg. Item: Electric Gantry STR For Slewing Stacker, MKD NO:D, DRG - NO: 012117-M-BM-EQ-GA-3124, R-1

    Uploaded by

    Kavin Prakash
    The document summarizes inspection reports for three engineering assemblies: 1) An electric gantry structure was found to have measurement and welding issues that require non-destructive testing and corrections before dismantling. 2) A buffer mounting arrangement was dimensionally checked and found to need rectification of a measurement before machining and confirmation of an item designation. 3) Six tubular drive shafts were inspected and found to have an arc strike on one pipe and need verification of a weld category between pipes and end shafts, with other measurements satisfactory.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 2

    Vendor: M/s, Dynamic SS Engg.

    Item: Electric Gantry Str for Slewing Stacker, MKD NO:D ,


    Drg.NO: 012117-M-BM-EQ-GA-3124,R-1
    1)
    2)
    3)
    4)
    5)

    Dimensions for Assy Found satisfactory


    Assy Level checked and found 6 mm
    NDT for all Butt joints (UT,MPI) not done
    E-Gantry Supporting Leg not fitted with Assy.
    E.P Preparation (V Groove) not made for all connecting members

    6) Gap Between ISMC and MB joints found about 5 mm at full penetration


    Site joints

    7) Approval to be obtained for Joint orientation for IT No:49,50


    8) Bend noticed on It No:49 to be removed
    9) Leftover welding, Visual works to be done
    Conclusion: Assy can be dismantled after completion of above points.

    Drg. No: 013074-M-BM-EQ-GA-4203, R-0


    Item: Buffer Mounting Arrangement for 4 wheel bogies, Qty-3 Nos
    1) Inline of bore marking checked with water column and found satisfactory.
    2) Dimensions 405 (bogie connecting point) found 400 to 401 to be rectified
    prior to machining.
    3) As per Drg.It No: 8 stated as HOLD whereas the item was welded and
    drilled with main item. Confirm the same with LT-Engg.
    4) Other dimn. Found satisfactory
    5) Visual work to be completed

    Drg. No: 6059, R-0


    Item: Tubular Drive shaft, Qty-6 Nos
    1) Deep arc strike noticed on the Pipe

    2) Weld joint between Pipe with end shaft to be checked w.r.t Category -C
    3) Other dimensions found satisfactory.
    4) Visual work to be completed

    You might also like