Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    Configuring Active Power Control

    Uploaded by

    mariewan

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Configuring Active Power Control

    Uploaded by

    mariewan
    24 views2 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    24 views2 pages

    Configuring Active Power Control

    Uploaded by

    mariewan

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    Configuring Active Power Control

    This section describes how to activate, verify, and deactivate the optional feature GBFD117602 Active Power Control.

    Prerequisites

    Dependencies on Hardware
    This feature does not have any special requirements for hardware.

    Dependencies on Other Features


    This feature does not depend on other features.

    License
    The license controlling this feature has been activated.

    Context
    Active Power Control enables the immediate performance of power control after an MS
    successfully gains access to the network or a handover is successfully performed in the BSC. In
    such a case, the BSC can control the uplink and downlink power promptly. Therefore, both the
    BTS and the MS transmit signals at a proper power. With the active power control, the system
    interference is decreased, the QoS is ensured, and the power consumption of the MS or BTS is
    decreased.

    Procedure

    Activation Procedure
    1.

    Run the BSC6900 MML command SET GCELLPWRBASIC. In this step,


    set Power Forecast Allowed to YES(Yes).

    2.

    Run the BSC6900 MML command SET GCELLBASICPARA. In this step, set UL
    PC Allowed to YES(Yes), and set DL PC Allowed to YES(Yes).

    Verification Procedure
    1.

    Run the BSC6900 MML command SET GTRXCHANADMSTAT. In this step,


    specify TRX ID and Channel No., and then set Administrative
    State toLock(Lock) to block all TCHs on the BCCH TRX of cell 0 except SDCCH.

    2.

    Perform the single user CS trace by referring toTracing CS Domain Messages of


    a Single Subscriber in cell 0.

    3.

    Make a call.
    NOTE:
    Ensure that the level is good during the test with the uplink/downlink level being
    greater than -60 dBm in the measurement report.

    4.

    Check the result in Single User CS Trace window.


    Expected result: The call is established successfully and the voice quality is good.
    The TCH occupied by the call is on a non-BCCH TRX, and the Measurement Result
    message regarding the call is present before the Channel Activation message is
    delivered. In this case, the values of the fields bs powerand ms power in the Channel

    Activation message are not the maximum (the maximum power level of the 900M cell
    is 5 and that of the 1800M cell is 0).

    Deactivation Procedure
    1.

    Run the BSC6900 MML command SET GCELLPWRBASIC. In this step,


    set Power Forecast Allowed to NO(No).

    2.

    Run the BSC6900 MML command LST GCELLPWRBASIC to query the setting
    of Power Forecast Allowed.
    Expected result: Power Forecast Allowed is set to NO.

    Parent topic: Configuring GBSS Features


    Huawei Proprietary and Confidential
    Copyright Huawei Technologies Co., Ltd.

    You might also like