Para List For GSM

BSC6900 GSM V900R011C00 Parameter Reference
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, plea headquarters.
Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: Email:
http://www.huawei.com support@huawei.com
Copyright Huawei Technologies Co., Ltd. 2010. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawe
Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The information in this document is subject to change without notice. Every effort has been made in the preparation of this docu
service. For any assistance, please contact our local office or company
out prior written consent of Huawei Technologies Co., Ltd.
spective holders.
ade in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this doc
recommendations in this document do not constitute the warranty of any kind, express or implied.
Purpose
This document provides information about the BSC6900 parameters, including the meaning, value, and usage of th
Intended Audience
Network planners Field engineers System engineers Shift operators
Organization
Each parameter is described in the following aspects. Description Parameter ID Parameter Name NE MML Command Meaning Feature ID Feature Name Value Type GUI Value Range Actual Value Range Unit Default Value Recommended Value Impact Parameter Relationship Access Service Interrupted After Modification Interruption Scope Interruption Duration (min)
Caution Validation of Modification Impact on Radio Network Performance Introduced in Version Attribute
about the BSC6900 parameters, including the meaning, value, and usage of the parameters.
ollowing aspects. Remarks Simple string for identifying a parameter Full name of the parameter NEs on which the parameter is set Commands for setting the parameter, and optional/mandatory attribute of the parameter in each command Functions, functioning ways, and protocols of the parameter Relevant feature ID Features using the parameter Parameter value type Parameter value range displayed on the GUI Actual parameter value range corresponding to the GUI Value Range. For example, the GUI Value Range is 0, and the corresponding Actual Value Range is OFF. Parameter value unit Initial value provided by the system Values recommended in different scenarios Parameter impact scope, that is, objects specified when the parameter is set Relationship between this parameter and other parameters. For example, to use this parameter, you need to set related switches and parameters. Whether this parameter is read/write or read only Whether modifying the parameter value may interrupt the existing services Possible interruption scope in the case that modifying the parameter value may interrupt the existing services Possible interruption duration in the case that modifying the parameter value may interrupt the existing services
Cautions to be taken during the modification Requirements on how to validate the modification of the parameter. For example, you may need to reset the device to validate the modification. Impact of the radio parameter on the network performance Version in which this parameter is introduced Whether this parameter is a radio parameter, a transport parameter, or an equipment parameter
Parameter ID Parameter Name
NE
MML Command Meaning
Feature ID
Feature Name
Downlink Quality Threshold in ABCDownQu Assigning Better ality Cell BSC6900
Downlink quality level threshold for the MS to be assigned with a SET channel of Assignment GCELLHOAD(O the better and Immediate ptional) cell. GBFD-110502 Assignment Uplink quality level threshold for the MS to be assigned with a SET channel of Assignment GCELLHOAD(O the better and Immediate ptional) cell. GBFD-110502 Assignment
Uplink Quality Threshold in ABCUpQualit Assigning Better y Cell
BSC6900
Maximum Better ABCWaitMax Cell Assigning Time Duration
BSC6900
The maximum duration for the BSC to select the best cell according to MRs in the MS assigning procedure. The BSC assigns the channel of the serving cell to the MS if the best cell is not selected within the duration SET specified Assignment GCELLHOAD(O by this and Immediate ptional) parameter. GBFD-110502 Assignment Whether to enable the BTS to support bypass function. HDLC BTS and IP BTS do not support this parameter. GBFD-116601 Abis Bypass
ABISBYPAS Abis ByPass SMODE Mode
BSC6900
ADD BTS(Optional)
ABISFCEN
SDCCH Congestion Flow Control Allowed BSC6900
Whether to permit Abis flow control. The flow control function helps in better call manageme nt. If congestion occurs, the system lightens its load by rejecting some services or prolonging the time for service requests. The Abis flow control is used to lighten the system SET load GCELLCCCH(O caused by GSM Flow ptional) Abis flows. GBFD-111705 Control
AbisFCTimer Abis Flow Control 1 Timer 1 BSC6900
Used along with "Abis Flow Control Timer 2" to control the change in cell flow control levels.Whe n the flow control level in the cell changes, the values of MS MAX Retrans and Txinteger in the system information are changed accordingly . When immediate assignmen t fails, the SET BSC6900 BSCTMR(Optio starts T1 GSM Flow nal) and T2. GBFD-111705 Control
AbisFCTimer Abis Flow Control 2 Timer 2 BSC6900
Used along with "Abis Flow Control Timer 1" to control the change in cell flow control levels.Whe n the flow control level in the cell changes, the values of MS MAX Retrans and Txinteger in the system information are changed accordingly . When immediate assignmen t fails, the SET BSC6900 BSCTMR(Optio starts T1 GSM Flow nal) and T2. GBFD-111705 Control
ABISIDLETS Abis Idle TS ALLOC Allocate Strategy BSC6900
This parameter controls the strategy for idle timeslot selection and optimizatio SET n by the BTSOTHPARA( PS Optional) channels. GBFD-114201 EGPRS
ABISIDLETS Abis Idle TS CFGSWITCH Configure Switch BSC6900
This parameter controls whether the strategy for timeslot configurati on and optimizatio n is started. When this parameter is set to ON, the bundled idle timeslots for the PS channel should be allocated to the same 64 kbit/s timeslot as the primary link. When this parameter SET is set to BTSOTHPARA( OFF, the Optional) idle GBFD-114201 EGPRS Threshold for enabling the BTS local switching. When the congestion rate at the Abis interface exceeds this threshold, the BTS SET local BSSLS(Optional switching BTS Local ) is enabled. GBFD-117702 Switch
AbisJamThre Abis Jam Rate for shold2StartLs BTS Local Switch BSC6900
ABISRESAD JTCHHFUNS TCHH Function W Switch
BSC6900
This parameter specifies whether to enable the Abis resource adjustment TCHH function. It specifies whether the TCHH is preferential ly allocated to the MS by the BSC6900, when Abis resources are insufficient. If the Abis resource load is greater than "Flex Abis Prior Choose Load SET Thred" or BTSFLEXABISP "Fix Abis ARA(Optional) Prior GBFD-117301 Flex Abis
Timer of ABISTSFRE Releasing Abis ETM Timeslot
BSC6900
Interval between detection of the Abis timeslot being in idle state and releasing of the Abis timeslot. When channels are idle, the timer is started. When the timer is expires, the Abis timeslot is released. When all the TBFs on the channel are released, the Abis timeslot is not SET released at PDCH GCELLPSCHM( once. Dynamic Optional) Instead, GBFD-113101 Adjustment Phase tag for GSM protocols that the SET Abis BSCBASIC(Opti interface Configuration onal) supports MRFD-210301 Management Duration available for the BTS to collect the AB after ADD the TRX or SoftAISSCFG(Optio channel is Synchronized nal) activated. GBFD-118201 Network
AbisVer
Abis Interface Tag
BSC6900
Duration of BTS ABLASTTIM Collecting AB[100 E Millisecond] BSC6900
AbnormalMos Abnormal Voice Threshold MOS Threshold
BSC6900
SET OTHSOFTPAR A(Optional)
Mean opinion score (threshold) for judging an abnormal call. The BTS computes the MOS of a call periodically and reports the call MOS to the BSC in custom measurem ent reports. According to the call MOS, the BSC checks whether the call is normal. If the call MOS is less than this Voice Quality threshold, Index (Uplink the BSC GBFD-116801 VQI)
ACCBURST
Access Burst Type
BSC6900
Access pulse type of the PRACH, uplink PTCCH and packet control acknowled ge message of the MS. 8bit: 8 bit pulse access mode; 11bit: 11 SET bit pulse GCELLPSBASE access (Optional) mode. GBFD-119110 Access
ACCCONTR Access Control OLCLASS Class
BSC6900
Access Control ACCCTRLEN Allowed
BSC6900
Access SET control GCELLPRACH( class of Optional) the MS GBFD-119110 Access When the cell supports Repeated This parameter specifies whether the access control function is enabled in a cell. When the function is enabled, the BSC determines which MSs in the cell to be connected to the network by sending the ACC classes through system messages according SET to the GCELLCCBASI specified Access Control C(Optional) policy in GBFD-511002 Class(ACC) This parameter specifies the index of the access control SET policy that GCELLCCBASI is used in Access Control C(Mandatory) a cell. GBFD-511002 Class(ACC)
Access Control ACCCTRLPY Policy
BSC6900
Incoming-to-BSC ACCESSOP HO Optimum TILAY Layer BSC6900
Subcell preferred during the incoming inter-BSC handover to the concentric cell. In the case of incoming inter-BSC handover to the concentric cell, the channels SET in this GCELLHOIUO( subcell are Optional) preferred. GBFD-113201 Concentric Cell This parameter specifies the index of an access control (ACC) policy. It is used to ADD identify an BSCACCCTRLP ACC Access Control (Mandatory) policy. GBFD-511002 Class(ACC) Whether the initial SET service is GCELLPSOTHE uplink, RPARA(Optiona downlink or l) neutral GBFD-119501 Adaptive Adjustment of Uplink and Downlink Channels
ACCINDEX
Access Control Policy Index
BSC6900
AccStaServic PS Initial Access eType Service Type BSC6900
ACCWPOS
Starting Point of the Access Control Window
BSC6900
This parameter is used to specify the starting point of the ACC sliding window in ADD an access BSCACCCTRLP control Access Control (Optional) policy. GBFD-511002 Class(ACC)
ACCWSIZE
Access Control Window Size
BSC6900
This parameter is used to specify the ACC sliding window size in an access control policy. MSs of the ACC access classes that are specified in the sliding window are not allowed ADD to access BSCACCCTRLP the Access Control (Optional) network. GBFD-511002 Class(ACC) This parameter is used to specify the sliding speed of the ACC sliding window in ADD an access BSCACCCTRLP control Access Control (Optional) policy. GBFD-511002 Class(ACC)
ACCWSP
Sliding Speed of the Access Control Window
BSC6900
ACFC
Address and control field compress
BSC6900
Whether to compress the address and control fields. If this parameter is set to ENABLE, the address and control area compressi on is enabled. If this parameter is set to DISABLE, the ADD address PPPLNK(Option and control al) area Abis IP over ADD compressi E1/T1 MPGRP(Optiona on is GBFD-118611 A IP over l) disabled. GBFD-118622 E1/T1 ADD BTSPPPLNK(O ptional) ADD BTSMPGRP(Op tional) IMP BTSPPPLNK(O ptional) IMP BTSMPGRP(Op tional)
ACFC
Support Address and Control Field Compress BSC6900
A flag bit indicates Whether to support the compressi on of the address and control Abis IP over fields. GBFD-118611 E1/T1
ACOOPERA A Interface TPAGINGS Paging CoWITCH ordination Switch BSC6900
This parameter specifies whether to receive the CS paging request from A interface when the MS uses a PS service. This parameter is used to control the paging collaborati on function of A interface of the entire BSC. This parameter specifies whether to forward the paging message of the A SET interface BSCPSSOFTPA from the BSS Paging RA(Optional) circuit GBFD-119305 Coordination
ACS
Additional Reselect Parameter Indication
BSC6900
Used for notifying MSs where to retrieve relevant parameters during cell reselection . The default value of this parameter is 0 in system message 3 and, has no special significanc e. In system message 4, if the value of this parameter is 0, it means that the MSs must Basic Cell Reretrieve the selection SET PI System GCELLIDLEAD( parameters GBFD-110402 Information Optional) and other GBFD-111101 Sending
ACTCDSETF AMR ACS[F]
BSC6900
Active coding set (ACS)[F], indicates a set of fullrate coding rates currently available for calls. The AMR is a set of multiple speech SET coding and GCELLCCAMR( decoding GBFD-115501 AMR FR Optional) rates. GBFD-115701 TFO
ACTCDSETH AMR ACS[H]
BSC6900
Active coding set (ACS)[H], indicates set of halfrate coding rates currently available for calls. The AMR is a set of multiple speech SET coding and GCELLCCAMR( decoding GBFD-115502 AMR HR Optional) rates. GBFD-115701 TFO
ACTCDSET WB
AMR ACS[WB]
BSC6900
Active coding set (ACS)[WB] , indicates a set of wide-band coding rates currently available for calls. The AMR is a set of multiple speech SET coding and GCELLCCAMR( decoding GBFD-115507 WB AMR Optional) rates. GBFD-115701 TFO
ACTL2REES Activate L2 ReT establishment
BSC6900
Whether to activate the function of L2 reestablishm ent. If this function is activated, the BSC starts the attempt of L2 reestablishm ent when the BSC receives an ERR IND message reported by the BTS in a conversati on of MSs. If the L2 reestablishm ent succeeds, the conversati SET on Call Control GCELLSOFT(O continues; GBFD-110501 Handover Reptional) otherwise, GBFD-510502 establishment Valid duration of the ADD reserved SoftAISSCFG(Optio TRX or Synchronized nal) timeslot GBFD-118201 Network
ACTTIME
Valid Time of BTS Resource Activation
BSC6900
ACVLTHD
AC Voltage Lower Threshold BSC6900
AC voltage alarm lower threshold. When the input AC voltage is lower than the value of this parameter, an alarm indicating the abnormal AC is reported. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSAPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS The BTS reports an alarm if the AC voltage exceeds SET the value BTSDPMUBP(O of this ptional) parameter. GBFD-111202 O&M of BTS The BTS reports an alarm if the AC voltage is lower than the SET value of BTSDPMUBP(O this ptional) parameter. GBFD-111202 O&M of BTS
ACVOLALAR AC Overvoltage MH Alarm Threshold
BSC6900
ACVOLALAR AC Undervoltage ML Alarm Threshold BSC6900
ACVUTHD
AC Voltage Upper Threshold BSC6900
The BTS reports an alarm if the AC voltage exceeds the value of the AC voltage alarm upper threshold. When the input AC voltage is higher than the value of this parameter, an alarm indicating the abnormal AC is reported. In multimode scenario, the value of this parameter must be SET the same BTSAPMUBP(O as the ptional) value of GBFD-111202 O&M of BTS Whether to hand over an MS to another channel during an intra-cell handover HUAWEI I SET through the Handover GCELLSOFT(O assignmen GBFD-110601 HUAWEI II ptional) t process GBFD-510501 Handover
ADAPTASSI Assignment GNMENTFL Procedure in IntraOW Cell HO Allowed BSC6900
ADDR
Communication Address
BSC6900
SET BTSFMUABP(O ptional) SET BTSAPMUBP(O ptional) SET BTSDATUBP(O ptional) SET BTSDEMUBP(O ptional) SET BTSDHEUBP(O ptional)
Communic ation address of the CBUS3 on the bus 485. The configurati on of this parameter must be consistent with the actual physical connection . Otherwise, the board may not work properly. GBFD-111202 O&M of BTS
Sub-Link Bandwidth Request Interval AddTransBwI When Not nt Congested
BSC6900
Interval for requesting the bandwidth for the secondary link when the system SET is not in BSCPSSOFTPA congestion GSM Flow RA(Optional) state GBFD-111705 Control Bandwidth requested each time for the secondary link when the system SET is not in BSCPSSOFTPA congestion GSM Flow RA(Optional) state GBFD-111705 Control
Bandwidth for Secondary Link AddTransBw When Not Num Congested
BSC6900
ADEF
External Alarm Customer Definition Switch
BSC6900
Whether to enable each AC RRU external alarm port's customer definition switch. "0" indicates that the external alarm port's customer definition switch is disabled and this port is not defined by customor but by vendor, and "1" indicates that the external SET alarm BTSRXUBP(Opt port's ional) customer GBFD-111202 O&M of BTS The destination signaling point ADD (DSP) of EXTNCELL(Man the datory) adjacent COL BSC must A Interface BSCSYNCINFO be an Iur-g Protocol (Mandatory) DSP. GBFD-111804 Process SET BTSEXCURSIO N(Mandatory) SET BSCSYNCOFF( Mandatory) Whether to adjust the BTS offset manually or Softautomatica Synchronized lly GBFD-118201 Network
Adjacent BSC ADJBSCDPC DPC
BSC6900
ADJMODE
Adjustment Mode BSC6900
Support EGPRS ADJUSTULM Uplink MCS CSTYPE Dynamic Adjust
BSC6900
Mode of dynamicall y adjusting the EGPRS uplink encoding scheme. Value 0 indicates dynamic adjustment of EGPRS uplink coding scheme is not supported; value 1 indicates that the uplink coding scheme is adjusted according to downlink quality measurem ents reported by SET MS; GCELLEGPRSP value 2 ARA(Optional) indicates GBFD-119204
Dynamically Adjusting the Uplink MCS Coding
ADLDACT
Auto Download Active Function Switch
BSC6900
This parameter specifies whether to enable automatic autoloading and autoactivation of the BTS software. If this parameter is set to Yes, the BTS software is automatica lly loaded and activated when the BTS is initialized or a board is added; the TMU software is automatica SET lly loaded BTSAUTODLDA and CTINFO(Option activated al) when the GBFD-111202 O&M of BTS
ADMODE
Auto Download Mode
BSC6900
This parameter specifies the automatic load mode of the BTS software. If this parameter is set to common download, common loading is performed on the OML/EML, and the link is not extended. If this parameter is set to quick download( without traffic), quick loading SET can be BTSAUTODLDA performed CTINFO(Option on the al) dynamicall GBFD-111202 O&M of BTS
ADMSTAT
Administrative State
BSC6900
SET Administrat GCELLADMSTA ive state of T(Mandatory) a cell GBFD-111202 O&M of BTS
ADMSTAT
BSC6900
SET Administrat GTRXADMSTA ive state of T(Mandatory) the TRX GBFD-111202 O&M of BTS
ADMSTAT
BSC6900
SET GTRXCHANAD MSTAT(Mandat ory)
Administrat ive state of the channel GBFD-111202 O&M of BTS
ADTET
Offset Time Adjustment End Time
BSC6900
End time for ADD adjusting AISSCFG(Optio the offset nal) time
SoftSynchronized GBFD-118201 Network
ADTLOD
Load Threshold of Offset Adjustment Offset Time Adjustment Switch
BSC6900
Cell load threshold for adjusting the offset time. If the load threshold is exceeded, ADD the offset SoftAISSCFG(Optio time is not Synchronized nal) adjusted. GBFD-118201 Network Offset ADD Time SoftAISSCFG(Mand Adjustment Synchronized atory) Switch GBFD-118201 Network Start time for ADD adjusting AISSCFG(Optio the offset nal) time
ADTON
BSC6900
ADTST
Offset Time Adjustment Start Time
BSC6900
Advanced Alarm ADVALMMG Management RULETP Rule Type
BSC6900
Advanced ADD alarm BTSALMMGMR manageme Faulty ULE(Mandatory) nt rule type MRFD-210304 Management
ADVER1
BTS Software Version 1
BSC6900
This parameter specifies the software version 1 that is automatica lly loaded and activated. The version of the BTS software stored on the OMU must be consistent with this version number. Otherwise, a software version inconsisten cy alarm is reported. An example of SET the version BTSAUTODLDA format is CTINFO(Option as follows: al) BTS3000V GBFD-111202 O&M of BTS
ADVER2
BTS Software Version 2
BSC6900
This parameter specifies the software version 2 that is automatica lly loaded and activated. The BTS software stored on the OMU must be consistent with this version number. Otherwise, the software version inconsisten cy alarm may be reported. An example of SET the version BTSAUTODLDA format is CTINFO(Option as follows: al) BTS3000V GBFD-111202 O&M of BTS If the echo path is traced, the echo is judged and controlled according to the trace result of the echo path parameters . Otherwise, the echo is judged and controlled according SET to the Acoustic Echo TCPARA(Option recommen Cancellation(A al) ded value. GBFD-115602 EC)
AEC_Echo_P AEC Echo Path ath_Delay Delay
BSC6900
AEC_Echo_ AEC Echo Return Return_Loss Loss BSC6900
This parameter is used for echo judgment and control when the echo SET parameters Acoustic Echo TCPARA(Option are not Cancellation(A al) traced. GBFD-115602 EC) If the local input voltage is lower than the value of this parameter and the remote end transmits the voice signal, the AEC function uses the comfort noise to replace the minor echo. In this case, the speech signals at SET low level Acoustic Echo TCPARA(Option may also Cancellation(A al) be cut. GBFD-115602 EC)
AEC_Nlp_Ga te AEC Nlp Gate
BSC6900
AEC_Path_D elay AEC Path Delay
BSC6900
Extra delay due to the transmissi on line. This parameter should be set according to the actual conditions and is applicable SET to satellite Acoustic Echo TCPARA(Option transmissi Cancellation(A al) on. GBFD-115602 EC) This parameter is used to determine whether there are speech signals at the local end. If the local SNR is lower than the value of this parameter, echo SET control is Acoustic Echo TCPARA(Option not Cancellation(A al) performed. GBFD-115602 EC) This parameter indicates whether the acoustic echo cancellatio n (AEC) SET functional Acoustic Echo TCPARA(Option switch is Cancellation(A al) on or off. GBFD-115602 EC)
AEC_SNR_G ate AEC SNR Gate
BSC6900
AEC_Switch AEC Switch
BSC6900
AECDetectTh AEC Detect reshold Threshold
BSC6900
Threshold for detecting SET the AEC Acoustic Echo TCPARA(Option performan Cancellation(A al) ce GBFD-115602 EC)
AECDetectTi me AEC Detect Time BSC6900
Time for detecting SET the AEC Acoustic Echo TCPARA(Option performan Cancellation(A al) ce GBFD-115602 EC)
AFRDSBLCN AFR Radio Link T Timeout
BSC6900
Counter for radio link failures during an AMR full rate call. See the description of "Radio Link Timeout" in SET "SET GCELLCCBASI GCELLCC AMR Wireless C(Optional) BASIC". GBFD-115505 Link Timer
AFRSAMULF AFR SACCH RM Multi-Frames
BSC6900
Number of SACCH multiframe s during an AMR full rate call. See the description of "SACCH MultiFrames" in SET "SET GCELLCCBASI GCELLCC AMR Wireless C(Optional) BASIC". GBFD-115505 Link Timer
AGPSRECEI VERID GPS ID AGPSRECEI VERTYPE GPS type
BSC6900
BSC6900
ADD GPS BSC/RNC GPS(Mandatory) receiver ID MRFD-210502 Clock GPS ADD receiver BSC/RNC GPS(Mandatory) type. MRFD-210502 Clock
AHRDSBLC NT
AHR Radio Link Timeout
BSC6900
Counter for radio link failures during an AMR half rate call. See the description of "Radio Link Timeout" in SET "SET GCELLCCBASI GCELLCC AMR Wireless C(Optional) BASIC". GBFD-115505 Link Timer
AHRSAMUL AHR SACCH FRM Multi-Frames
BSC6900
AID
Alarm ID
BSC6900
AID
Alarm ID
BSC6900
Number of SACCH multiframe s during an AMR half rate call. See the description of "SACCH MultiFrames" in SET "SET GCELLCCBASI GCELLCC C(Optional) BASIC". GBFD-115505 SET ALMPORT(Man datory) Alarm ID MRFD-210304 SET ALMBLKPARA( Mandatory) Alarm ID MRFD-210304 SET ALMLVL(Mandat ory) SET ALMSHLD(Man datory) SET BOXRPT(Manda tory)
AMR Wireless Link Timer Faulty Management Faulty Management
AID
Alarm ID
BSC6900
Identifier of the alarm. This parameter uniquely identifies Faulty an alarm. MRFD-210304 Management
AID
Alarm ID
BSC6900
Identifier of the alarm. This parameter ADD uniquely OBJALMSHLD( identifies Faulty Optional) an alarm. MRFD-210304 Management Identifier of the alarm. This parameter SET uniquely ENVALMPARA( identifies Mandatory) an alarm. MRFD-210304 SET BTSENVALMP ORT(Optional) Alarm ID GBFD-111202 ADD BTSOBJALMSH LD(Mandatory) Alarm ID MRFD-210304
AID
Alarm ID
BSC6900
Faulty Management
AID
Alarm ID.
BSC6900
O&M of BTS Faulty Management
AID
Alarm ID.
BSC6900
AIDDELAYP ROTECTTIM Aiding Delay E Protect Time Alarm Select Type
BSC6900
AIDST
BSC6900
Delay time for mutualaid detection on a cell after the cell is initialized. When the cell initializatio n has just finished, the cell is in an unstable state. Mutual-aid detection at this time may cause a wrong decision. Therefore, this parameter is used for SET specifying GCELLSOFT(O proper TRX ptional) delay. GBFD-113801 Cooperation ADD Type of OBJALMSHLD( alarm Faulty Optional) selection MRFD-210304 Management
AIDST
Alarm Select Type
BSC6900
ADD Alarm BTSOBJALMSH selection LD(Mandatory) mode
Faulty MRFD-210304 Management
A Interface Msg AInterMsgTra [End2end User ce Tracing]
BSC6900
SET OTHSOFTPAR A(Mandatory)
Whether to trace Ainterface messages during endto-end user tracing. The end-toend tracing is conducted throughout the network. The Ainterface tracing results can be obtained from the End-to-End MS MSC or Signaling BSC. GBFD-116401 Tracing
AINTFFCDIS A IF FC Discard CLUEN LOC UP Enable
BSC6900
Whether to allow flow control for the location update services SET during the BSCFCPARA(O A interface GSM Flow ptional) flow control GBFD-111705 Control whether to allow flow control for the mobileoriginated services SET during the BSCFCPARA(O A interface GSM Flow ptional) flow control GBFD-111705 Control
AINTFFCDIS A IF FC Discard CMOCEN MOC Enable
BSC6900
AINTFFCDIS A IF FC Discard CMTCEN MTC Enable
BSC6900
Whether to allow flow control for the mobileterminated services SET during the BSCFCPARA(O A interface GSM Flow ptional) flow control GBFD-111705 Control Whether to allow flow control for the other services including emergency call, call reestablish, and LMU services SET during the BSCFCPARA(O A interface GSM Flow ptional) flow control GBFD-111705 Control Whether to enable the A interface flow control SET mechanis BSCFCPARA(O m in the GSM Flow ptional) BSC6900 GBFD-111705 Control
A IF FC Discard AINTFFCDIS Other Service COSEN Enable
BSC6900
A Interface Flow AINTFFCEN Control Enable
BSC6900
AINTFFCME A Interface Flow THOD Control Method
BSC6900
Flow control method used by the BSC6900. Flow control method at the Abis interface: When receiving a channel request message, the BSC6900 begins flow control on the call according to the flow control level of the A interface. Flow control method at the A SET interface: BSCFCPARA(O When GSM Flow ptional) establishin GBFD-111705 Control Rate of discarded services in level 1 of SET the A BSCFCPARA(O interface GSM Flow ptional) flow control GBFD-111705 Control Rate of discarded services in level 2 of SET the A BSCFCPARA(O interface GSM Flow ptional) flow control GBFD-111705 Control Rate of discarded services in level 3 of SET the A BSCFCPARA(O interface GSM Flow ptional) flow control GBFD-111705 Control
AINTFFCRS A IF FC Service RATE1 Rate in Level 1
BSC6900
BSC6900
BSC6900
BSC6900
Rate of discarded services in level 4 of SET the A BSCFCPARA(O interface GSM Flow ptional) flow control GBFD-111705 Control Rate of discarded services in level 5 of SET the A BSCFCPARA(O interface GSM Flow ptional) flow control GBFD-111705 Control Rate of discarded services in level 6 of SET the A BSCFCPARA(O interface GSM Flow ptional) flow control GBFD-111705 Control CSD(Circui t Switched Data) service redundanc y level, which is configured to decrease the data loss rate during transmissi SET on in A BSCBASIC(Opti over IP onal) mode. GBFD-118602 A over IP SET TCPARA(Option al) SET TCPARA(Option al) Fixed gain value in Automatic fixed gain Level Control mode GBFD-115601 (ALC) Target level in Automatic fixed level Level Control mode GBFD-115601 (ALC)
BSC6900
BSC6900
CSD Service AIPCSDSRV Redundancy RDNDLEV Level
BSC6900
ALC_Fix_Gai n ALC Fix Gain ALC_Fix_Tar ALC Fix Target get_Level Level
BSC6900
BSC6900
ALC_Max_G ain ALC Max Gain
BSC6900
This parameter restrains the maximum gain to the input signal. It is valid only when "ALC Mode" is "FIXEDLE VEL" or "ADAPTIV E". If the parameter is set to a small value, it may affect the conforman SET ce to the Automatic TCPARA(Option target Level Control al) level. GBFD-115601 (ALC) Maximum SET target level Automatic TCPARA(Option in adaptive Level Control al) ALC mode GBFD-115601 (ALC) Mimumum SET target level Automatic TCPARA(Option in adaptive Level Control al) ALC mode GBFD-115601 (ALC)
ALC_Max_Ta ALC Max Target rget_Level Level
BSC6900
ALC_Min_Ta ALC Min Target rget_Level Level
BSC6900
ALC_Mode
ALC Mode
BSC6900
SET ALC level TCPARA(Option control al) mode
Automatic Level Control GBFD-115601 (ALC)
ALC_Switch
ALC Switch
BSC6900
Whether to enable the adaptive level SET control Automatic TCPARA(Option (ALC) Level Control al) function GBFD-115601 (ALC)
ALIVERETR Y Alive Retry
BSC6900
Retry times after the timer for the reply from the peer expires during the NSVC live test. If the reply is not received after the system resends the message according to retry times, the SET NSVC is BSCNSPARA(O regarded ptional) as faulty. GBFD-510002 Gb Over FR Duration of the timer to wait for the reply from the peer SET during the BSCNSPARA(O NSVC live ptional) test GBFD-510002 Gb Over FR
ALIVETIMER Alive Timer
BSC6900
AllBw
Bandwidth
BSC6900
Specifies the bandwidth occupied when the " transmissi on resource group type " is IP and the " bandwidth ADD mode " is RSCGRP(Mand HALF_DU atory) PLEX. GBFD-118605 IP QOS
Resource ALLOCDIFFT Reallocation to RX Different Trx
BSC6900
Whether to reassign SET the TBF for BSCPSSOFTPA a different RA(Optional) Trx GBFD-114101 GPRS When this parameter is set to ON, the GMM/SM signaling service is assigned only one PDCH; otherwise, the GMM/SM signaling service is assigned one or SET more PDCH GCELLPSCHM( PDCHs as Dynamic Optional) required. GBFD-113101 Adjustment
ALLOCSING LEPDCHFO Allocate One RSIGNALLIN PDCH for G Signaling Data
BSC6900
ALLOWAMR HALFRATEU SERPERC Ratio of AMR-HR BSC6900
Maximum ratio of the number of AMR half rate channels to the total number of channels in a cell. When the resource allocation principle is determined by the BSC, no AMR half rate channel can be further assigned if the ratio of the number of AMR half rate channels to the total number of channels SET in the cell GCELLCHMGB is greater ASIC(Optional) than or GBFD-111005
Enhanced Channel Assignment Algorithm
ALLOWEDA DAMULTIPL Allow EDA EX Multiplex
BSC6900
Whether to allow EDA multiplex. "Not Allow": the TBF of the EDA cannot be multiplexed with other TBR; "Allow": the TBF of the EDA can be SET multiplexed EDA(Extended BSCPSSOFTPA with other Dynamic RA(Optional) TBF. GBFD-119401 Allocation)
ALLOWEDM Allowed Measure EASRPTMIS Report Missed SEDNUM Number BSC6900
ALLOWHALF RATEUSERP ERC Ratio of TCHH
BSC6900
Number of allowed measure report missed. If the number of allowed measure report missed exceeds this value, the previous NetworkSET measure Controlled Cell GCELLNC2PAR report is Reselection A(Optional) invalid. GBFD-116201 (NC2) Maximum ratio of the number of half rate channels to the total number of channels in a cell. When the resource allocation principle is determined by the BSC, no half rate channel can be further assigned if the ratio of the number of half rate channels to the total number of channels in the cell is greater than or Enhanced SET equal to Channel GCELLCHMGB the value Assignment ASIC(Optional) of this GBFD-111005 Algorithm
ALLTSTYPE Timeslot Type
BSC6900
Value ALLCIC indicates that all E1/T1 timeslots on the A interface must be set with the start CIC. Value ALLNULL indicates that all E1/T1 timeslots on the A interface can be set ADD with the A Interface AE1T1(Mandato value Circuit ry) NULL. GBFD-111803 Management Value ALLCIC indicates that all E1/T1 timeslots on the PB interface must be set with the start CIC. Value ALLNULL indicates that all E1/T1 timeslots on the PB interface can be set ADD with the PBE1T1(Option value al) NULL. GBFD-111203 O&M of BSC
ALLTSTYPE Timeslot Type
BSC6900
ALMD0
Feed Tri. 0 TMA Low Current Alarm Threhold
BSC6900
If the feed current of the TMA on tributary 0 is smaller than the value of this Faulty parameter, Management the TMA Connection Low with TMA SET Temperatu (Tower BTSDATUBP(O re alarm is MRFD-210304 Mounted ptional) triggered. MRFD-210601 Amplifier) If the feed current of the TMA on tributary 1 is smaller than the value of this Faulty parameter, Management the TMA Connection Low with TMA SET Temperatu (Tower BTSDATUBP(O re alarm is MRFD-210304 Mounted ptional) triggered. MRFD-210601 Amplifier) If the feed current of the TMA on tributary 2 is smaller than the value of this Faulty parameter, Management the TMA Connection Low with TMA SET Temperatu (Tower BTSDATUBP(O re alarm is MRFD-210304 Mounted ptional) triggered. MRFD-210601 Amplifier)
ALMD1
BSC6900
ALMD2
BSC6900
ALMD3
BSC6900
If the feed current of the TMA on tributary 3 is smaller than the value of this Faulty parameter, Management the TMA Connection Low with TMA SET Temperatu (Tower BTSDATUBP(O re alarm is MRFD-210304 Mounted ptional) triggered. MRFD-210601 Amplifier) If the feed current of the TMA on tributary 4 is smaller than the value of this Faulty parameter, Management the TMA Connection Low with TMA SET Temperatu (Tower BTSDATUBP(O re alarm is MRFD-210304 Mounted ptional) triggered. MRFD-210601 Amplifier) If the feed current of the TMA on tributary 5 is smaller than the value of this Faulty parameter, Management the TMA Connection Low with TMA SET Temperatu (Tower BTSDATUBP(O re alarm is MRFD-210304 Mounted ptional) triggered. MRFD-210601 Amplifier)
ALMD4
BSC6900
ALMD5
BSC6900
Alarm Disappear ALMDISACD Accumulate UR Duration BSC6900
ADD BTSALMMGMR ULE(Mandatory)
Alarm Enable ALMENABLE Flag
BSC6900
AlmId
Alarm ID.
BSC6900
ALMID
Alarm ID.
BSC6900
SET BTSAPMUBP(O ptional) SET BTSDPMUBP(O ptional) SET BTSALMFLASH THD(Mandatory) ADD BTSALMMGMR ULE(Mandatory) Alarm ID
Accumulat ed alarm clearance failure duration.T hreshold for the accumulat ed duration in which the alarm persists. If the accumulat ed duration exceeds this threshold, an alarm is cleared. Otherwise, the alarm Faulty persists. MRFD-210304 Management Whether the configurati on of alarm parameters is allowed. In multimode scenario, the value of this parameter must be the same as the value of the parameter in other Faulty modes. MRFD-210304 Management ID of the intermittent Faulty alarm. MRFD-210304 Management Faulty MRFD-210304 Management
ALMLMTDO WN Lower Alarm
BSC6900
If the input current of the antenna feeder is smaller than the value of this parameter, an alarm related to SET the GPS BTSDGPSBP(O antenna is Faulty ptional) reported. MRFD-210304 Management If the input current of the antenna feeder is greater than the value of this parameter and "GPS or RGPS" is set to "GPS", an alarm related to SET the GPS BTSDGPSBP(O antenna is Faulty ptional) reported. MRFD-210304 Management If the input current of the antenna feeder is greater than the value of this parameter and "GPS or RGPS" is set to "RGPS", an alarm related to SET the RGPS BTSDGPSBP(O antenna is Faulty ptional) reported. MRFD-210304 Management
ALMLMTUP1 Upper Alarm
BSC6900
ALMLMTUP2 Upper Alarm
BSC6900
Alarm Occurrence ALMOCACD Accumulate UR Duration
BSC6900
Accumulat ed alarm occurrence duration.T hreshold for the accumulat ed duration in which the alarm persists. If the accumulat ed duration exceeds this threshold, an alarm is generated. ADD Otherwise, BTSALMMGMR no alarm is Faulty ULE(Mandatory) generated. MRFD-210304 Management
Alarm Occur AlmOccurAcc Accumulative uTimeHThd Time Threshold
BSC6900
Alarm Occur Accumulati ve Time refers to the percentage of the alarm occurrence accumulati ve time to "Flash Statis Alarm Raise Time Window". If the alarm occurrence accumulati ve duration is greater than the parameter value, the BTS fault statistical alarm is reported. For SET example, if BTSALMFLASH the Faulty THD(Optional) parameter MRFD-210304 Management
Alarm Clear AlmOccurAcc Accumulative uTimeLThd Time Threshold
BSC6900
Alarm Clear Accumulati ve Time refers to the percentage of the alarm clearance accumulati ve time to "Flash Statis Alarm Clear Time Window". If the alarm clearance accumulati ve duration is greater than this threshold, the BTS fault statistical alarm is cleared. For example, if SET the BTSALMFLASH parameter Faulty THD(Optional) value is MRFD-210304 Management
AlmOccurTim Alarm Occur esHThd Times Threshold BSC6900
If the number of alarm flashes exceeds the value of this parameter within the time specified by "Flash Statis Alarm Raise Time Window", the BTS Statistical Alarm is generated. If this parameter is set to 0, the statistics of the BTS alarm SET flashes is BTSALMFLASH not Faulty THD(Optional) collected. MRFD-210304 Management
AlmOccurTim Alarm Clear esLThd Times Threshold BSC6900
If the number of alarm flashes is smaller than the value of this parameter within the time specified by "Flash Statis Alarm Clear Time Window", the BTS Statistical Alarm is cleared. If this parameter is set to 0, the statistics of the BTS alarm SET flashes is BTSALMFLASH not Faulty THD(Optional) collected. MRFD-210304 Management Whether the configurati on of alarm parameters is allowed. The value "YES" indicates that the configurati on is allowed, and the value "NO" indicates that the SET configurati BTSDHEUBP(O on is not Faulty ptional) allowed. MRFD-210304 Management
Alarm Parameter ALMPARACF Configuration GFLAG Enabled BSC6900
ALMTP
Alarm Type
BSC6900
EXP ALMLOG(Option al) STA ALMLOG(Option al)
Type of the alarm. The alarm can be a fault alarm or an event Faulty alarm. MRFD-210304 Management
ALPHA
ALPHA
BSC6900
It is used to perform open loop power control. Alpha parameter is used by the MS to calculate the output power PCH of the uplink PDCH. This parameter is used to set the reduced class of the Tx power of the MS, in correspond ence with the path loss, when the GPRS dynamic SET power GCELLPSPWP control is ARA(Optional) enabled. GBFD-119115 Power Control Decimal SET part of the BSS-Based GCELLLCS(Opti antenna LCS (Cell ID + onal) altitude GBFD-115402 TA) Height of the specified GSP ADD receiver GPS(Mandatory) antenna
ALTIDECI
Antenna Altitude Decimal Part
BSC6900
ALTITUDE
GPS antenna altitude
BSC6900
BSC/RNC MRFD-210502 Clock
ALTITUDE
Antenna Altitude Int Part
BSC6900
Integer SET part of the BSS-Based GCELLLCS(Opti antenna LCS (Cell ID + onal) altitude GBFD-115402 TA)
ALTITUDEIM GPS antenna P altitude
BSC6900
Height of the specified GSP ADD receiver GPS(Mandatory) antenna
ALVL
Alarm Severity
BSC6900
Alarm severity. One or more severities can be selected. By default, all EXP severities ALMLOG(Option are Faulty al) selected. MRFD-210304 Management Alarm severity. One or SET more ALMLVL(Mandat severities ory) can be SET selected. ALMSCRN(Man By default, datory) all SET severities ENVALMPARA( are Faulty Optional) selected. MRFD-210304 Management Whether to O&M of BTS supply Connection power to with TMA SET the TMA (Tower BTSDATUBP(O on tributary GBFD-111202 Mounted ptional) 0 MRFD-210601 Amplifier) Whether to O&M of BTS supply Connection power to with TMA SET the TMA (Tower BTSDATUBP(O on tributary GBFD-111202 Mounted ptional) 1 MRFD-210601 Amplifier) Whether to O&M of BTS supply Connection power to with TMA SET the TMA (Tower BTSDATUBP(O on tributary GBFD-111202 Mounted ptional) 2 MRFD-210601 Amplifier)
ALVL
Alarm Severity
BSC6900
AMPC0
Feed Tri. 0 TMA Configuration
BSC6900
AMPC1
BSC6900
AMPC2
BSC6900
AMPC3
BSC6900
Whether to O&M of BTS supply Connection power to with TMA SET the TMA (Tower BTSDATUBP(O on tributary GBFD-111202 Mounted ptional) 3 MRFD-210601 Amplifier) Whether to O&M of BTS supply Connection power to with TMA SET the TMA (Tower BTSDATUBP(O on tributary GBFD-111202 Mounted ptional) 4 MRFD-210601 Amplifier) Whether to O&M of BTS supply Connection power to with TMA SET the TMA (Tower BTSDATUBP(O on tributary GBFD-111202 Mounted ptional) 5 MRFD-210601 Amplifier) Maximum degree by which the BSC can control the power of the AMR SET BTS GCELLPWR2(O dynamicall AMR Power ptional) y GBFD-115503 Control Whether to enable the III power control algorithm for AMR calls. If enabled, power control is SET performed HUAWEI III GCELLPWR3(O on AMR Power Control ptional) calls. GBFD-117601 Algorithm
AMPC4
BSC6900
AMPC5
BSC6900
AMRBTSPW AMR BTS PC RNUM Class
BSC6900
AMRCALLPC Allow III Power ALLOWED Control For AMR BSC6900
AMR Downlink Adaptive AMRDADTH Threshold AW Allowed
BSC6900
Whether to enable the adaptive adjustment function of AMR downlink threshold. After this function is enabled, the BTS estimates the longterm voice quality (indicated by the longterm FER(frame erase ratio)) and compares the estimated result with the specified target voice quality. If SET the GCELLCCAMR( estimated Optional) result does GBFD-115506
AMR Coding Rate Threshold Adaptive Adjustment
AMR Filter AMRDLLEVF Length for DL TLEN RX_LEV
BSC6900
Number of measurem ent reports sampled for averaging downlink AMR signal strength. A single measurem ent report may not reflect the actual network situations accurately. Therefore, the BSC needs to average the measured values in several successive measurem ent reports to reflect SET the radio GCELLPWR2(O environme AMR Power ptional) nt. GBFD-115503 Control
AMR DL MR. AMRDLPRE Number DLEND Predicted
BSC6900
Number of downlink AMR measurem ent reports that the BSC predicts. The BSC takes a while to confirm the power control effect of a power control command. Thus, the BSC makes a power control decision based on a measurem ent report that lags behind the changes in the receive SET level and GCELLPWR2(O quality AMR Power ptional) instead of GBFD-115503 Control
AMRDLQHT AMR DL Qual. HRED Upper Threshold BSC6900
Quality level threshold for decreasing downlink AMR signal power. If the BTS transmits AMR signals at a quality level less than "AMR DL Qual. Upper Threshold" , the BSC decreases the power of the BTS. If (downlink receive level "AMR MAX Down Adj. PC Value by Qual.") SET < "AMR DL GCELLPWR2(O RX_LEV AMR Power ptional) Lower GBFD-115503 Control
AMRDLQLT HRED
AMR DL Qual. Lower Threshold BSC6900
Quality level threshold for increasing downlink AMR signal power. If the BTS transmits AMR signals at a quality level greater than "AMR DL Qual. Lower Threshold" , the BSC increases the power of the BTS. If (downlink receive level + "AMR MAX Up Adj. PC Value by SET Qual.") > GCELLPWR2(O "AMR DL AMR Power ptional) RX_LEV GBFD-115503 Control
AMR Filter AMRDLQUA Length for DL FTLEN Qual.
BSC6900
Number of measurem ent reports sampled for averaging downlink AMR signal quality. A single measurem ent report may not reflect the actual network situations accurately. Therefore, the BSC needs to average the measured values in several successive measurem ent reports to reflect SET the radio GCELLPWR2(O environme AMR Power ptional) nt. GBFD-115503 Control
AMR DL Qual AMRDLQUA Bad Trig LBADTRIG Threshold
BSC6900
During downlink power control, if the downlink receive quality level is equal to or greater than this threshold, "AMR DL RX_LEV Upper Threshold" is increased by "AMR DL Qual Bad UpLEVDiff " to further increase the expected SET downlink GCELLPWR2(O power AMR Power ptional) level. GBFD-115503 Control
AMRDLQUA AMR DL Qual LBADUPLEV Bad UpLEVDiff
BSC6900
During downlink power control, if the downlink receive quality level is equal to or greater than "AMR DL Qual Bad Trig Threshold" , "AMR DL RX_LEV Upper Threshold" is increased by "AMR DL Qual Bad UpLEVDiff " to further increase the expected SET downlink GCELLPWR2(O power AMR Power ptional) level. GBFD-115503 Control
AMRDLSSH AMR DL RX_LEV THRED Upper Threshold BSC6900
Upper threshold for downlink AMR signal strength. If the downlink received AMR signal level is greater than this threshold, a power decrease is computed. Then, the power is decreased by the least of the power decrease, maximum power adjustment step allowed by SET the quality GCELLPWR2(O zone to AMR Power ptional) which the GBFD-115503 Control
AMRDLSSLT AMR DL RX_LEV HRED Lower Threshold BSC6900
Lower threshold for downlink AMR signal strength. If the downlink received AMR signal level is less than this threshold, a power increase is computed. Then, the power is increased by the least of the power increase, "AMR MAX Up Adj. PC Value by RX_LEV", and "AMR MAX Up SET Adj. PC GCELLPWR2(O Value by AMR Power ptional) Qual.". GBFD-115503 Control Whether to enable the algorithm for the loadbased AMR handover between SET full rate GCELLHOBASI and half HUAWEI II C(Optional) rate GBFD-510501 Handover
AMRFULLTO HALFHOALL AMR F-H Ho OW Allowed
BSC6900
AMRFULLTO AMR F-H Ho HALFHOATC ATCB Adjust BADJSTEP Step
BSC6900
With "F-H Ho Period" and the duration for triggering handover from full rate to half rate, this parameter determines the current ATCB offset by which to choose the MSs to undergo handover from full rate to half rate. ATCB offset = (duration for triggering handover from full rate to half SET rate/"F-H GCELLHOBASI Ho Period" HUAWEI II C(Optional) + 1) x GBFD-510501 Handover
AMRFULLTO HALFHOATC AMR F-H Ho BTHRESH ATCB Threshold BSC6900
ATCB threshold for the AMR handover from full rate to half rate. If the ATCB of an AMR full rate call is equal to or greater than this threshold, the AMR call is handed SET over from GCELLHOBASI full rate to HUAWEI II C(Optional) half rate. GBFD-510501 Handover
AMRFULLTO AMR F-H Ho HALFHOPAT Pathloss Adjust HADJSTEP Step
BSC6900
With "F-H Ho Period" and the duration for triggering handover from full rate to half rate, this parameter determines the current path loss offset by which to choose the MSs to undergo handover from full rate to half rate. Path loss offset = (duration for triggering handover from full rate to half SET rate/"F-H GCELLHOBASI Ho Period" HUAWEI II C(Optional) + 1) x GBFD-510501 Handover
AMRFULLTO AMR F-H Ho HALFHOPAT Pathloss HTHRESH Threshold
BSC6900
Path loss threshold for the AMR handover from full rate to half rate. If the path loss of an AMR full rate call is equal to or less than this threshold, the AMR call is handed SET over from GCELLHOBASI full rate to HUAWEI II C(Optional) half rate. GBFD-510501 Handover Quality threshold for the AMR handover from full rate to half rate. If the uplink and downlink receive quality levels of an AMR full rate call are equal to or less than this threshold, the AMR call is handed SET over from GCELLHOBASI full rate to HUAWEI II C(Optional) half rate. GBFD-510501 Handover
AMRFULLTO HALFHOQU AMR F-H Ho ALTHRESH Qual. Threshold
BSC6900
AMRFULLTO HALFHOTHR AMR F-H Traffic ESH Threshold
BSC6900
Load threshold for the AMR handover from full rate to half rate. If the cell load is greater than this threshold, the AMR full rate calls are SET handed GCELLHOBASI over to half HUAWEI II C(Optional) rate. GBFD-510501 Handover ATCB threshold for the AMR handover from half rate to full rate. If the ATCB of an AMR half rate call is less than this threshold, the AMR call is handed SET over from GCELLHOBASI half rate to HUAWEI II C(Optional) full rate. GBFD-510501 Handover
AMRHALFT OFULLHOAT AMR H-F Ho CBTHRESH ATCB Threshold BSC6900
AMRHALFT AMR H-F Ho OFULLHOPA Pathloss THTHRESH Threshold
BSC6900
Path loss threshold for the AMR handover from half rate to full rate. If the path loss of an AMR half rate call is greater than this threshold, the AMR call is handed SET over from GCELLHOBASI half rate to HUAWEI II C(Optional) full rate. GBFD-510501 Handover Whether to enable the algorithm for the uplink and downlink receive quality based AMR handover SET from half GCELLHOBASI rate to full HUAWEI II C(Optional) rate GBFD-510501 Handover
AMRHALFT OFULLHOQ UALALLOW
Allow AMR H-F Quality-based HO BSC6900
AMRHALFT OFULLHOQ AMR H-F Ho UALTHRESH Qual. Threshold
BSC6900
Quality threshold for the AMR handover from half rate to full rate. If the receive quality level of an AMR half rate call is greater than this threshold, the AMR call is handed SET over from GCELLHOBASI half rate to HUAWEI II C(Optional) full rate. GBFD-510501 Handover Load threshold for the AMR handover from half rate to full rate. If the cell load is less than this threshold, the AMR half rate calls are SET handed GCELLHOBASI over to full HUAWEI II C(Optional) rate. GBFD-510501 Handover Maximum step by which the power can be increased according SET to received GCELLPWR2(O signal AMR Power ptional) quality GBFD-115503 Control
AMRHALFT OFULLHOTH AMR H-F Traffic RESH Threshold
BSC6900
AMR MAX Up AMRMAXAD Adj. PC Value by JPCVAL Qual. BSC6900
AMR MAX Down AMRMAXST Adj. Value Qual. EP0 Zone 0 BSC6900
Maximum step by which the power can be decreased when the received signal quality belongs to quality zone 0. Huawei power control algorithm generation II classifies the received signal quality into three quality zones. The maximum step by which the power can be SET decreased GCELLPWR2(O according AMR Power ptional) to signal GBFD-115503 Control
Maximum step by which the power can be decreased when the received signal quality belongs to quality zone 1. Huawei power control algorithm generation II classifies the received signal quality into three quality zones. The maximum step by which the power can be SET decreased GCELLPWR2(O according AMR Power ptional) to signal GBFD-115503 Control
Maximum step by which the power can be decreased when the received signal quality belongs to quality zone 2. Huawei power control algorithm generation II classifies the received signal quality into three quality zones. The maximum step by which the power can be SET decreased GCELLPWR2(O according AMR Power ptional) to signal GBFD-115503 Control Maximum step by which the power can be increased SET according GCELLPWR2(O to received AMR Power ptional) signal level GBFD-115503 Control
AMR MAX Up AMRMAXVA Adj. PC Value by LADJRX RX_LEV BSC6900
AMR MR. AMRMRCOM Compensation PREG Allowed
BSC6900
Whether to enable the compensat ion of AMR measurem ent reports in Huawei power control algorithm generation II If this parameter is set to YES, Huawei power control algorithm generation II puts a currently received measurem ent report into the measurem ent report compensat ion queue. SET Then, the GCELLPWR2(O algorithm AMR Power ptional) records the GBFD-115503 Control Minimum interval between two consecutiv e AMR SET power GCELLPWR2(O control AMR Power ptional) commands GBFD-115503 Control Maximum step by which the power can be decreased according SET to received GCELLPWR2(O signal AMR Power ptional) quality GBFD-115503 Control
AMRPCADJ PERIOD
AMR PC Interval BSC6900
AMR MAX Down AMRQUALS Adj. PC Value by TEP Qual. BSC6900
AMR SACCH AMRSADLU Downlink Power PGRADE Upgrade
BSC6900
Number of levels by which the BTS increases the power of an SACCH frame. This parameter is used for SACCH power control. When sending an SACCH frame, the BTS increases the power of the SACCH frame by this SET specified Enhanced GCELLPWRBA number of Power Control SIC(Optional) levels. GBFD-110703 Algorithm Whether to enable the BSC to assign AMR half rate channels preferential ly according to the channel types allowed by the MSC and the current TCH SET seizure GCELLCHMGA ratio of the D(Optional) cell GBFD-115502 AMR HR
AMRTCHHP AMR TCH/H Prior RIORALLOW Allowed BSC6900
AMR TCH/H Prior AMRTCHHP Cell Load RIORLOAD Threshold BSC6900
Load threshold for assigning half rate channels preferential ly. If the current TCH seizure ratio of the cell is greater than this threshold, AMR half rate channels are SET assigned GCELLCHMGA preferential D(Optional) ly. GBFD-115502 AMR HR
AMR Uplink Adaptive AMRUADTH Threshold AW Allowed
BSC6900
Whether to enable the adaptive adjustment function of AMR uplink threshold. After this function is enabled, the BTS estimates the longterm voice quality (indicated by the longterm FER(frame erase rate)) and compares the estimated result with the specified target voice quality. If SET the GCELLCCAMR( estimated Optional) result does GBFD-115506
AMR Filter AMRULLEVF Length for UL TLEN RX_LEV
BSC6900
Number of measurem ent reports sampled for averaging uplink AMR signal strength. A single measurem ent report may not reflect the actual network situations accurately. Therefore, the BSC needs to average the measured values in several successive measurem ent reports to reflect SET the radio GCELLPWR2(O environme AMR Power ptional) nt. GBFD-115503 Control
AMR UL MR. AMRULPRE Number DLEND Predicted
BSC6900
Number of uplink AMR measurem ent reports that the BSC predicts. The BSC takes a while to confirm the power control effect of a power control command. Thus, the BSC makes a power control decision based on a measurem ent report that lags behind the changes in the receive SET level and GCELLPWR2(O quality AMR Power ptional) instead of GBFD-115503 Control
AMRULQHT AMR UL Qual. HRED Upper Threshold BSC6900
Quality level threshold for decreasing the power of an uplink AMR call. If the MS transmits AMR signals at a quality level less than "AMR ULQual. Upper Threshold" , the BTS decreases the power of the MS. If (uplink receive level "AMR MAX Down Adj. PC Value by Qual.") < "AMR UL SET RX_LEV GCELLPWR2(O Lower AMR Power ptional) Threshold" GBFD-115503 Control
AMRULQLO AMR UL Qual. WTHRED Lower Threshold BSC6900
Quality level threshold for increasing the power of an uplink AMR call. If the MS transmits AMR signals at a quality level greater than "AMR UL Qual. Lower Threshold" , the BTS increases the power of the MS. If (uplink receive level + "AMR MAX Up Adj. PC Value by Qual.") > SET "AMR UL GCELLPWR2(O RX_LEV AMR Power ptional) Upper GBFD-115503 Control
AMR Filter AMRULQUA Length for UL FTLEN Qual
BSC6900
Number of measurem ent reports sampled for averaging uplink AMR signal quality. A single measurem ent report may not reflect the actual network situations accurately. Therefore, the BSC needs to average the measured values in several successive measurem ent reports to reflect SET the radio GCELLPWR2(O environme AMR Power ptional) nt. GBFD-115503 Control
AMR UL Qual. AMRULQUA Bad Trig LBADTRIG Threshold
BSC6900
During uplink power control, if the uplink receive quality level is equal to or greater than this threshold, "AMR UL RX_LEV Upper Threshold" is increased by "AMR UL Qual. Bad UpLEVDiff " to further increase the expected SET uplink GCELLPWR2(O power AMR Power ptional) level. GBFD-115503 Control
AMRULQUA AMR UL Qual. LBADUPLEV Bad UpLEVDiff
BSC6900
During uplink power control, if the uplink receive quality level is equal to or greater than "AMR UL Qual. Bad Trig Threshold" , "AMR UL RX_LEV Upper Threshold" is increased by "AMR UL Qual. Bad UpLEVDiff " to further increase the expected SET uplink GCELLPWR2(O power AMR Power ptional) level. GBFD-115503 Control
AMRULSSH AMR UL RX_LEV THRED Upper Threshold BSC6900
Upper threshold for uplink AMR signal strength If the uplink received AMR signal level is greater than this threshold, a power decrease is computed. Then, the power is decreased by the least of the power decrease, maximum power adjustment step allowed by the quality SET zone to GCELLPWR2(O which the AMR Power ptional) received GBFD-115503 Control
AMRULSSLT AMR UL RX_LEV HRED Lower Threshold BSC6900
Lower threshold for uplink AMR signal strength. If the uplink received AMR signal level is less than this threshold, a power increase is computed. Then, the power is increased by the least of the power increase, "AMR MAX Up Adj. PC Value by RX_LEV", and "AMR MAX Up Adj. PC SET Value by GCELLPWR2(O Qual.". AMR Power ptional) Power GBFD-115503 Control
AN19
MAX Retrans Reset Circle Msg on A-I BSC6900
Maximum number of retransmis sions of the Ainterface circuit reset message. When an Ainterface circuit of the BSC is reset, the BSC sends the reset message to the MSC and starts a timer. If the BSC fails to receive the A-interface circuit reset response message from the MSC before the timer A Interface expires, Circuit the BSC GBFD-111803 Management
AN4
MAX Reset Mesg Retransmission on A-I BSC6900
Maximum number of times of resending a reset message at the A interface. When the BSC6900 is reset, the BSC6900 sends a reset message to the MSC and starts a timer. If the timer expires when the BSC6900 waits for a response message, the BSC6900 resends the reset message SET and A Interface AITFOTHPARA( restarts a Circuit Optional) timer. If the GBFD-111803 Management Maximum gain to the signals from the remote end. If the parameter is set to a small value, the target SNR may be restrained when the signal SET arrives at TCPARA(Option the local al) end. GBFD-115703
ANC_Max_G ain ANC Max Gain
BSC6900
Automatic Noise Compensation (ANC)
ANC_Switch ANC Switch
BSC6900
Whether to enable the adaptive noise SET cancel TCPARA(Option (ANC) al) function GBFD-115703 The system adjusts the remote input so that the ratio of the remote signal to the local noise is above the SET value of TCPARA(Option this al) parameter. GBFD-115703
ANC_Target_ SNR ANC Target SNR BSC6900
ANGLE
RET Antenna Tilt Angle BSC6900
Tilt angle of the RET antenna, it is accurate to one place of decimal, for example, SET the tilt can BTSANTANGLE be 7.7 Remote (Mandatory) degree. MRFD-210602 Electrical Tilt ADD ADJNODE(Man datory) ADD IPPATH(Mandat ory) ADD ADJMAP(Manda tory) ADD IPMUX(Mandato ry) ADD IPPATHBIND(M andatory) SET ENVALMPARA( Optional)
ANI
Adjacent Node ID BSC6900
Uniquely identifies an adjacent node
GBFD-118601 GBFD-118602 GBFD-118605 GBFD-118611 GBFD-118622
Abis over IP A over IP IP QOS Abis IP over E1/T1 A IP over E1/T1
ANI
Adjacent node ID BSC6900
ANM
Alarm Name
BSC6900
Adjacent node identifier of this IP path None None New name of the Faulty alarm MRFD-210304 Management
ANR_Mode
ANR Mode
BSC6900
SET Automatic TCPARA(Option Noise Restraint al) ANR mode GBFD-115603 (ANR) This parameter determines the noise depression degree. A large absolute value of this parameter correspond s to a SET strong TCPARA(Option depression al) . GBFD-115603 SET TCPARA(Option ANR target al) noise level GBFD-115603
ANR_Noise_ Reduction_Le ANR Noise vel Reduction Level ANR_Noise_ ANR Noise Target_Level Target Level
BSC6900
BSC6900
Automatic Noise Restraint (ANR) Automatic Noise Restraint (ANR)
ANR_Switch ANR Switch
BSC6900
Whether to enable the adaptive noise SET restrain Automatic TCPARA(Option (ANR) Noise Restraint al) function GBFD-115603 (ANR) BSS-Based Size of the LCS (Cell ID + azimuth TA) SET angle of SoftGCELLLCS(Opti the cell GBFD-115402 Synchronized onal) antenna GBFD-118201 Network
Antenna Azimuth ANTAANGLE Angle BSC6900
ANTENNALO GPS Antenna NG Delay
BSC6900
Length of the feeder cable. The GPS satellite card is connected to the antenna through feeder cables. The transmissi on delay on the feeder cable can be calculated on the basis of the length of the feeder cable, thus SET increasing BTSDGPSBP(O the timing BTS GPS ptional) accuracy Synchronizatio SET of the n BTSUSCUBP(O satellite GBFD-510401 BTS/NodeB ptional) card. MRFD-210501 Clock SET BTSDGPSBP(O ptional) SET BTSUSCUBP(O ptional) Power supply switch of the GPS antenna feeder BTS GPS Synchronizatio n GBFD-510401 BTS/NodeB MRFD-210501 Clock
ANTENNAP OWERSWIT Antenna Power CH Supply Switch
BSC6900
ANTIERRFL E1T1 anti-error AG switch
BSC6900
Abis IP over ADD E1T1 antiE1/T1 MPGRP(Optiona error GBFD-118611 A IP over l) switch. GBFD-118622 E1/T1 Whether to enable the BTS to clear the burglar SET alarm BTSTHEFTALM automatica (Optional) lly GBFD-111202 O&M of BTS
AntiTheftAllo Burglar Alarm w Auto Clear Permit BSC6900
ANTNO
Antenna No.
BSC6900
LOD RETANTCFG(M andatory) SET BTSANTANGLE (Mandatory) SET Number of RETANTENB(M the Remote andatory) antenna MRFD-210602 Electrical Tilt Number of the antenna feeder ADD channel TRXBIND2PHY mapped to BRD(Mandatory) the RXU GBFD-111202 O&M of BTS Antenna pass No. of the RXU of a sublocation group. The parameter is configured only when the MRRU or GRRU is used in ADD the subBTSBINDLOCG location RP(Optional) group. GBFD-510104 Multi-site Cell ADD BTSANTFEEDE RBRD(Mandator y) SET BTSANTFEEDE RCONNECT(Op tional)
ANTPASSN O
Antenna Pass No BSC6900
ANTPASSN O
Sub-Location Group Antenna Pass No.
BSC6900
AORB
Down TRX1 A or B BSC6900
Antenna pass number of the downlink tributary GBFD-111202 O&M of BTS
APN
A interface port No.
BSC6900
Number of a port on ADD the A A Interface MTP3LNK(Mand interface Protocol atory) board GBFD-111804 Process
APP
Application type
BSC6900
Upper layer application type of the SCTP link. The upper layer application type of A and LB interface is M3UA. In the BSC disaster tolerance, the application type is BBAP in the case of the communic ation between the primary ADD and SCTPLNK(Mand secondary atory) BSC. GBFD-118602 A over IP Application type of the ADD semiSemiSEMILINK(Mand permanent Permanent atory) link GBFD-114701 Connection Update frequency of the value N (packet drop interval), indicating that the packet drop interval is updated after N packets SET are PS Active BSCPSSOFTPA transmitted Package RA(Optional) . GBFD-119904 Management
APPTYPE
Application Type
BSC6900
AqmM
AQM N Update Interval
BSC6900
AqmMaxTh
AQM Maximum Threshold
BSC6900
Upper length threshold of the TBF buffer queue. If the length of the TBF buffer queue exceeds this threshold, whether the packets are discarded is determined according to the SET packet PS Active BSCPSSOFTPA discarding Package RA(Optional) policy. GBFD-119904 Management Congestio n threshold of the TBF buffer queue. If the congestion level in the TBF buffer queue exceeds this threshold, whether the packets are discarded actively is determined according to the SET packet PS Active BSCPSSOFTPA discarding Package RA(Optional) policy. GBFD-119904 Management
AqmMinTh
AQM Congestion Threshold BSC6900
AqmNinit
AQM Packet Discard Initial Interval
BSC6900
Initial value of the interval (indicated by N) at which the packets in the TBF buffer queue are discarded. The value N indicates the frequency of discarding the packets in the TBF buffer queue. The greater the value N, the lower the frequency of discarding packets, SET and the PS Active BSCPSSOFTPA smaller the Package RA(Optional) number of GBFD-119904 Management Lower threshold of the interval for discarding the packets in the TBF buffer queue, that is, the minimum value of N SET (packet PS Active BSCPSSOFTPA drop Package RA(Optional) interval). GBFD-119904 Management
AQM Packet AqmNLowerB Discard Interval ound Lower Threshold BSC6900
AQM Packet AqmNUpBou Discard Interval nd Upper Threshold BSC6900
AqmSwitch
AQM Switch
BSC6900
Upper threshold of the interval for discarding the packets in the TBF buffer queue, that is, the maximum value of N SET (packet BSCPSSOFTPA drop RA(Optional) interval). GBFD-119904 SET BSCPSSOFTPA AQM RA(Optional) switch GBFD-119904
PS Active Package Management PS Active Package Management
AqmTarTh
AQM Target Threshold
BSC6900
Target threshold SET of the TBF PS Active BSCPSSOFTPA buffer Package RA(Optional) queue GBFD-119904 Management Local area code, for SET example, BSCBASIC(Opti 021 for Configuration onal) Shanghai MRFD-210301 Management CMP BRDAREA(Opti onal) LOD PATCH(Optional ) Area flag LOD BRD(Optional) SYN BRDAREA(Opti onal) Area flag
AreaCode
Area Code
BSC6900
AREAFLAG
Area flag
BSC6900
BSC/RNC Software MRFD-210401 Management
AREAFLAG
Area flag
BSC6900
Abnormal Release AREDISTHD Threshold
BSC6900
Threshold for reporting the recovery alarm for the abnormal release alarm. If the percentage of the abnormal channel releases is equal to or less than this threshold, the recovery alarm for the abnormal release alarm is reported. That is, the abnormal SET release GTRXRLALM(O alarm is ptional) cleared. GBFD-111004
Radio Dedicated Channel Management
ARELBASE
Abnormal Release Statistic Base BSC6900
Release statistics base for subchanne ls. This parameter indicates the number of times that a subchanne l is activated. In a timeslot, the release statistics base, B, multiplied by the number of channels, N, is the channel release sum, S. If the percentage of the abnormal channel SET releases in GTRXRLALM(O the latest S ptional) channel GBFD-111004
Abnormal Warn ARELWTHD Threshold
BSC6900
Threshold for reporting the abnormal release alarm. In a timeslot, the release statistics base, B, multiplied by the number of channels, N, is the channel release sum, S. If the percentage of the abnormal channel releases in the latest S channel releases exceeds this threshold, SET the GTRXRLALM(O abnormal ptional) release GBFD-111004
ARPRETRY
ARP packet resend times
BSC6900
Retransmi ssion times upon ARP timeout. When the ARP request times exceeds the retransmis sion time without a response, the ARP/BFD detection failure alarm is reported. This may trigger the port or IP Fault STR board Detection IPCHK(Optional) switchover. GBFD-118609 Based on BFD
ARPTIMEOU ARP packet timeT out[100ms] BSC6900
ARP packet STR timeout IPCHK(Optional) time
Abis IP over E1/T1 GBFD-118611 A IP over GBFD-118622 E1/T1
ASN
A interface slot No.
BSC6900
Number of the slot where the ADD A interface A Interface MTP3LNK(Mand board is Protocol atory) located GBFD-111804 Process ADD ATERSL(Option al) ADD ATERCONSL(O ptional) Number of the slot where the A interface A Interface board is Protocol located GBFD-111804 Process
ASN
A interface slot No.
BSC6900
ASRN
A interface subrack No.
BSC6900
Number of the subrack where the ADD A interface A Interface MTP3LNK(Mand board is Protocol atory) located GBFD-111804 Process Network manageme nt type of the alarm. EXP By default, ALMLOG(Option all network al) manageme STA nt types ALMLOG(Option are Faulty al) selected. MRFD-210304 Management
ASS
Event Type
BSC6900
ASS
Event Type
BSC6900
Network manageme nt type of the alarm. By default, all network manageme SET nt types ENVALMPARA( are Faulty Optional) selected. MRFD-210304 Management
AssignBetter Assigning Better CellEn Cell Allowed
BSC6900
Switch for assigning the channel of a better cell to the SET MS during Assignment GCELLHOAD(O MS and Immediate ptional) access. GBFD-110502 Assignment
Assignment Cell ASSLOADJU Load Judge DGEEN Enable
BSC6900
When this parameter is set to ENABLE, if the cell supports direct retry and the current cell load is equal to or larger than the value of "Cell direct retry forbidden threshold" in "SET GCELLOT HEXT" during the assignmen t, the BSC6900 continues with the direct retry procedure. When this parameter is set to SET DISABLE, GCELLCCBASI the current C(Optional) call applies GBFD-110607 Direct Retry
Assign to ASSOLRXLE Overlayer RxLev VOFFSET Offset BSC6900
Offset relative to the level threshold for determinin g whether to assign a channel in SET the GCELLCHMGA overlaid D(Optional) subcell GBFD-113201 Concentric Cell
ASSORXUC Associated RXU N Board CN
BSC6900
Number of the cabinet where the associated RXU board is installed. This parameter is valid for DRRU, MRRU, GRRU, or BTS3900E board in the remote monitoring subrack of the DBS3036, DBS3900 GSM, or BTS3900E GSM. The associated SET RXU board BTSAPMUBP(O cannot be ptional) associated SET with other BTSDEMUBP(O boards ptional) such as SET DEMU, BTSDHEUBP(O APMU, or ptional) DTCU. GBFD-111202 O&M of BTS
ASSORXUC Associated RXU N Board CN
BSC6900
Number of the cabinet where the associated RXU board is installed. This parameter is valid for DRRU, MRRU, GRRU, or BTS3900E board in the remote monitoring subrack of the DBS3036, DBS3900 GSM, or BTS3900E GSM. The associated RXU board cannot be associated with other boards such as SET DEMU, BTSRXUBP(Ma APMU, or ndatory) DTCU. GBFD-111202 O&M of BTS SET BTSAPMUBP(O ptional) SET BTSDEMUBP(O ptional) SET BTSDHEUBP(O ptional)
ASSORXUS Associated RXU N Board SN
BSC6900
Number of the slot where the associated RXU board is installed. GBFD-111202 O&M of BTS
ASSORXUS Associated RXU N Board SN
BSC6900
Number of the slot where the SET associated BTSRXUBP(Ma RXU board ndatory) is installed. GBFD-111202 O&M of BTS
ASSORXUS Associated RXU RN Board SRN
BSC6900
SET BTSAPMUBP(O ptional) SET BTSDEMUBP(O ptional) SET BTSDHEUBP(O ptional)
Number of the subrack where the associated RXU board is installed. GBFD-111202 O&M of BTS
ASSORXUS Associated RXU RN Board SRN
BSC6900
ASSThres
Absolute Signal Strength Threshold
BSC6900
Number of the subrack where the SET associated BTSRXUBP(Ma RXU board ndatory) is installed. GBFD-111202 O&M of BTS Absolute level threshold for automatic optimizatio n of neighbor cells and frequencie s. The measurem ent results in measurem ent reports are screened and counted according to this threshold. If the signal strength of a neighbor cell in a measurem ent report is greater 2G/3G SET than this Neighboring OTHSOFTPAR threshold, Cell Automatic A(Optional) the GBFD-510901 Optimization
ASSTIMER
T3107
BSC6900
After the BSC6900 delivers an assignmen t command, the T3107 timer starts. If the BSC6900 receives an assignmen t complete message within the scheduled time, the T3107 timer stops. If the timer expires, the BSC6900 sends an SET assignmen Assignment GCELLTMR(Opt t failure and Immediate ional) message. GBFD-110502 Assignment
AT1
T1
BSC6900
AT13
T13 -s
BSC6900
Timer for waiting for a single Ainterface circuit blocking or unblocking answer. The BSC6900 starts this T1 timer after sending a single Ainterface circuit blocking or unblocking message. If the BSC6900 does not receive a blocking or unblocking answer from the MSC before this timer SET expires for BSCTMR(Optio the first nal) time, the GBFD-111203 O&M of BSC MSC reset protection timer, that is, interval between the time when the BSC6900 receives an MSC reset message and the time when the SET BSC6900 A Interface BSCAITFTMR( answer to Circuit Optional) the MSC. GBFD-111803 Management
AT17
T17 -s
BSC6900
SET BSCAITFTMR( Optional)
T17 timer. When receiving an MSC overload message or a single point congestion message for the first time, the BSC6900 increases the level of the A interface flow control and starts the T17 and T18 timers at the same time. Timers T17 and T18 are set for adjusting the flow control level over the A GSM Flow interface. GBFD-111705 Control
AT18
T18 -s
BSC6900
T18 timer. When receiving an MSC overload message or a single point congestion message for the first time, the BSC6900 increases the level of the A interface flow control and starts the T17 and T18 timers at the same time. Timers T17 and T18 are set for adjusting the flow control level over the A GSM Flow interface. GBFD-111705 Control
AT19
T19
BSC6900
Timer for waiting for an Ainterface circuit reset answer. The BSC6900 starts this timer after sending an A-interface circuit reset message. When this timer expires for the first time, the BSC6900 resends the circuit reset message to the MSC. If this timer expires for the second O&M of BSC SET time, the A Interface BSCTMR(Optio BSC6900 GBFD-111203 Circuit nal) reports an GBFD-111803 Management
AT20
T20
BSC6900
Timer for waiting for an Ainterface circuit group blocking or unblocking answer. After sending a CIC group blocking/u nblocking message over the A interface, the BSC6900 starts the timer T20. If the BSC6900 fails to receive a response from the MSC before the first expiry of T20, the SET BSC6900 BSCTMR(Optio resends nal) the CIC GBFD-111203 O&M of BSC Timer for waiting for an Ainterface A Interface reset Circuit answer GBFD-111803 Management
AT4
T4 -s
BSC6900
Concentric Circles ATCB HO ATCBHOEN Allowed BSC6900
Whether to enable the ATCB handover algorithm for the concentric cell. According to the neighbor cell signal, the ATCB handover algorithm determines the coverage of the overlaid subcell and balances the load between the overlaid subcell, underlaid subcell, and SET neighbor GCELLHOBASI cell. C(Optional) Therefore, GBFD-113201 Concentric Cell
ATCBHYST
Distance Hysteresis Between Boundaries
BSC6900
Hysteresis in the distance between the boundary of the overlaid subcell and the boundary of the underlaid subcell. This parameter helps to adjust "Distance Between Boudaries of Subcells" and thus to prevent ping-pong handover between the overlaid and SET underlaid GCELLHOEDB subcells. Enhanced DualPARA(Optional) Assume GBFD-114402 Band Network
Distance Between Boundaries of ATCBTHRED Subcells BSC6900
Distance between the boundary of the overlaid subcell and the boundary of the underlaid subcell. This parameter specifies the difference between the coverage of the overlaid subcell and the coverage of the underlaid subcell in the concentric cell or dualSET frequency GCELLHOEDB network Enhanced DualPARA(Optional) scenario. GBFD-114402 Band Network Whether to enable the BSC to use a 8 kbit/s timeslot to transmit 8 kbit/s data at the Ater interface GBFD-116901 Flex Ater Whether to enable the BSC to assign half rate channels preferential ly when the Ater interface is congested GBFD-116901 Flex Ater
Ater8KSw
Switch of 8K on Ater
BSC6900
AterCongHR HR Allocation Flag Flag
BSC6900
AterCongstR Congestion Ratio atio on Ater Resource BSC6900
SET OTHSOFTPAR A(Optional) ADD MTP3LNK(Mand atory) ADD ATERE1T1(Man datory) ADD ATERCONPAT H(Optional) ADD ATERSL(Manda tory) ADD ATERCONSL(M andatory) ADD SEMILINK(Mand atory)
Threshold for considerin g the Ater interface, if congested, the BSC determines whether to assign full or half rate channels preferential ly according to the congestion situations at the Ater interface. If the Ater resource usage exceeds this parameter, the Ater interface is considered congested. GBFD-116901 Flex Ater
ATERIDX
Ater connection path index
BSC6900
Index of an Ater connection path GBFD-111203 O&M of BSC
AterJamThre Ater Jam Rate for shold2StartLs BSC Local Switch BSC6900
Threshold for enabling the BSC local switching. When the congestion rate at the Ater interface exceeds this threshold, SET the BSSLS(Optional function is BSC Local ) enabled. GBFD-117701 Switch
ATERMASK Ater Mask
BSC6900
ADD MTP3LNK(Mand atory) ADD ATERSL(Manda tory) ADD ATERCONSL(M andatory)
Ater interface timeslot mask
GBFD-111203 O&M of BSC
ATEROMLFL Whether or not AG for OML
BSC6900
Whether to configure the Ater OML link used for the TC subrack for the port. If it is actually configured and you specify that it is not configured, the TC subrack fails to start. If it is not configured and you specify that it is already configured, crosstalk occurs on the ADD timeslot SemiSEMILINK(Mand over the Permanent atory) port. GBFD-114701 Connection Ater ADD maintenan ATEROML(Man ce link Configuration datory) index MRFD-210301 Management Ater connection path index,The index is set through the ADD ADD ATERCON ATEROML(Man PATH Configuration datory) command. MRFD-210301 Management ADD ATERSL(Option al) ADD ATERCONSL(O ptional)
ATEROMLIN X Ater OML Index
BSC6900
ATERPIDX
Ater Connection Path Index
BSC6900
ATERSLID
Ater Signaling Channel ID
BSC6900
Indentifies an Ater signaling channel GBFD-111203 O&M of BSC
ATERTRANS Ater Interface MODE Transfer Mode
BSC6900
Transport mode of the Ater interface. The Ater interface can be in TDM or in SET IP BSCBASIC(Man transport datory) mode.
Ater Compression GBFD-116902 Transmission
ATN
Antenna Tributary No. BSC6900
Number of the RF port on the RF front-end board of the BTS. The STR number is BTSVSWRTST( unique in a Optional) board. GBFD-111202 O&M of BTS
ATSMASK
A interface timeslot mask
BSC6900
ADD A interface A Interface MTP3LNK(Mand timeslot Protocol atory) mask GBFD-111804 Process
ATT
Attach-detach Allowed
BSC6900
SET GCELLIDLEBA SIC(Optional)
Attachdetach Allowed (ATT). If this parameter is set to YES, when an MS is powered off, the network does not process any call connection for the MS as a called party. In this way, the network processing time and resources are saved. GBFD-110302 IMSI Detach
ATTENFACT Antenna Tributary OR1 1 Factor BSC6900
O&M of BTS TMA Connection attenuation with TMA SET factor of (Tower BTSRXUBP(Opt antenna GBFD-111202 Mounted ional) tributary 1 MRFD-210601 Amplifier) O&M of BTS TMA Connection attenuation with TMA SET factor of (Tower BTSRXUBP(Opt antenna GBFD-111202 Mounted ional) tributary 2 MRFD-210601 Amplifier) SET E1T1LOP(Optio nal) STR E1T1TST(Optio nal) It specifies the loopback duration. None It specifies the test duration. None
ATTENFACT Antenna Tributary OR2 2 Factor BSC6900
AUSTOP
Loop time[min]
BSC6900
None
AUSTOP
Test time[min]
BSC6900
None
Authentication AUTHMODE Mode
BSC6900
SSL authenticat SET ion mode SSLAUTHMOD of the peer Security E(Mandatory) certificate MRFD-210305 Management
AUTHMODE Validate mode
BSC6900
Validation mode of Abis IP over ADD the PPP or E1/T1 PPPLNK(Manda MP link GBFD-118611 A IP over tory) negotiation GBFD-118622 E1/T1
AUTHMODE Validate mode
BSC6900
Validation mode of Abis IP over ADD the PPP or E1/T1 MPGRP(Mandat MP link GBFD-118611 A IP over ory) negotiation GBFD-118622 E1/T1 ADD BTSPPPLNK(M andatory) ADD BTSMPGRP(Ma ndatory) IMP BTSPPPLNK(M andatory) IMP BTSMPGRP(Ma ndatory)
AUTHMODE Validate Mode
BSC6900
Validation mode of the PPP or MLPPP link Abis IP over negotiation GBFD-118611 E1/T1
Validate user AUTHNAME name
BSC6900
Username to validate, for the Abis IP over ADD PPP or MP E1/T1 PPPLNK(Manda link GBFD-118611 A IP over tory) negotiation GBFD-118622 E1/T1
Validate user AUTHNAME name
BSC6900
Username to validate, for the Abis IP over ADD PPP or MP E1/T1 MPGRP(Mandat link GBFD-118611 A IP over ory) negotiation GBFD-118622 E1/T1 ADD BTSPPPLNK(M andatory) ADD BTSMPGRP(Ma ndatory) IMP BTSPPPLNK(M andatory) IMP BTSMPGRP(Ma ndatory)
Validate User AUTHNAME Name
BSC6900
Username to validate, for the PPP or MLPPP link Abis IP over negotiation GBFD-118611 E1/T1
AUTHPWD
Validate password
BSC6900
Password to validate, Abis IP over ADD upon PPP E1/T1 PPPLNK(Manda or MP link GBFD-118611 A IP over tory) negotiation GBFD-118622 E1/T1
AUTHPWD
Validate password
BSC6900
Password to validate, Abis IP over ADD upon PPP E1/T1 MPGRP(Mandat or MP link GBFD-118611 A IP over ory) negotiation GBFD-118622 E1/T1
AUTHPWD
Validate Password
BSC6900
ADD BTSPPPLNK(M andatory) ADD BTSMPGRP(Ma ndatory) IMP BTSPPPLNK(M andatory) IMP BTSMPGRP(Ma ndatory)
Password to validate, upon PPP or MLPPP link Abis IP over negotiation GBFD-118611 E1/T1
AUTHTYPE
Validate protocol type BSC6900
Type of validation protocol for Abis IP over ADD the PPP or E1/T1 PPPLNK(Option MP link GBFD-118611 A IP over al) negotiation GBFD-118622 E1/T1
AUTHTYPE
Validate protocol type BSC6900
Type of validation protocol for Abis IP over ADD the PPP or E1/T1 MPGRP(Optiona MP link GBFD-118611 A IP over l) negotiation GBFD-118622 E1/T1 ADD BTSPPPLNK(O ptional) ADD BTSMPGRP(Op tional) IMP BTSPPPLNK(O ptional) IMP BTSMPGRP(Op tional)
AUTHTYPE
Validate Protocol Type BSC6900
Type of the validation protocol for the PPP or MLPPP link Abis IP over negotiation GBFD-118611 E1/T1
AUTO
Auto negotiation
BSC6900
Whether the selfnegotiation mode is adopted 1. When the FG2 board is used and the port type is GE, the selfnegotiation mode must be adopted. 2. If the selfnegotiation mode is adopted, the FE port rate, working mode and flow control mode must be in accordanc e with the negotiation SET result. If IP Fault ETHPORT(Opti the selfDetection onal) negotiation GBFD-118609 Based on BFD Whether intersubrack path can be added automatica Configuration lly MRFD-210301 Management
AUTOADDS Add inter-subrack RCON path automatically BSC6900
ADD BRD(Optional)
Auto Adjust UL AUTOADJUL TH and THHYSTF Hysteresis [F]
BSC6900
Whether to allow automatic adjustment for the uplink threshold and hysteresis SET of full rate GCELLCCAMR( AMR call Optional) rates GBFD-115501 AMR FR
Auto Adjust UL AUTOADJUL TH and THHYSTH Hysteresis [H]
BSC6900
Whether to allow automatic adjustment for the uplink threshold and hysteresis SET of half rate GCELLCCAMR( AMR call Optional) rates GBFD-115502 AMR HR
Support Auto AutoGetBtsL Obtaining of BTS ogFlag Logs BSC6900
Whether to enable the BSC to obtain BTS logs automatica lly GBFD-111202 O&M of BTS
AUTONEG
Automatic Negotiation Mode BSC6900
Whether to enable the SET autoBTSETHPORT( negotiation Optional) mode GBFD-118601 Abis over IP
AUTOTYPE AUTOULKS W
Work Mode for Auto Download Activation Auto Unlock Switch
BSC6900
BSC6900
The parameter specifies the work mode for the automatic download and activation of the BTS software. BTS Software Auto DL and ACT indicates that the BTS boards are downloade d and activated as required. TMU Software Auto ACT indicates that only SET the BTSAUTODLDA TMU/DTM CTINFO(Option U/GTMU al) software is GBFD-111202 O&M of BTS LCK Auto SCHTSK(Option unlock Security al) switch MRFD-210305 Management Duration of time after which the locked user is SET unlocked PWDPOLICY(O automatica Security ptional) lly MRFD-210305 Management optical adaptation type between high-order path and multiplex section. None
AutoUnlockTi me Auto Unlock Time BSC6900
AUTYPE
Administration unit type
BSC6900
SET OPT(Optional)
None
AVer
A Interface Tag
BSC6900
AVOL
Alarm level
BSC6900
Phase tag for GSM protocols supported by the A interface. The value of this parameter is chosen according to the A interface phase tag SET provided A Interface BSCBASIC(Opti by the Protocol onal) MSC. GBFD-111804 Process SET Alarm level ALMPORT(Opti for a digital Faulty onal) port MRFD-210304 Management Alarm SET BTSENVALMP ORT(Optional) level. It is valid for the digital port.
AVOL
Alarm VOL.
BSC6900
B1B2 signal B1B2SDTHR degraded D threshold
BSC6900
SET OPT(Optional)
Threshold of B1 and B2 signal degrade. This parameter specifies the generation threshold and the recovery threshold of the B1B2 signal degradatio n threshold in SDH frames at the optical port. None
None
B1B2SFTHR B1B2 signal fail D threshold
BSC6900
SET OPT(Optional)
Threshold of B1 and B2 signal failure. This parameter specifies the generation threshold and the recovery threshold of the B1B2 signal failure threshold in SDH frames at the optical port. None
None
B3SDTHRD
B3 signal degrade threshold BSC6900
SET OPT(Optional)
Threshold of B3 signal degrade. This parameter specifies the generation threshold and the recovery threshold of the B3 signal degradatio n threshold in SDH frames at the optical port. None
None
B3SFTHRD
B3 signal fail threshold
BSC6900
SET OPT(Optional)
Threshold of B3 signal failure. This parameter specifies the generation threshold and the recovery threshold of the B3 signal failure threshold in SDH frames at the optical port. None
None
BACK8KCLK Switch of SW1 backplane LINE1 BSC6900
SET CLK(Optional)
Switch of backplane BSC/RNC LINE1 MRFD-210502 Clock
BACK8KCLK Switch of SW2 backplane LINE2 BSC6900
SET CLK(Optional) BKP LOGDB(Optiona l)
Switch of backplane BSC/RNC LINE2 MRFD-210502 Clock Directory for saving O&M of BSC the backup GBFD-111203 Security file MRFD-210305 Management Path (complete path) of the backup Configuration file MRFD-210301 Management
BackupPath
Backup Path
BSC6900
BACKUPPAT Path of Backup H File
BSC6900
BKP DB(Optional)
Bad Quality BADQUALDI Disconnection SCTHRES Threshold
BSC6900
Quality threshold for determinin g that a call is disconnect ed because of poor quality. If the uplink quality or downlink quality in the measurem ent reports during the period of "Timer for Bad Quality DISC Statistic" is higher than the value of this parameter before the call is SET disconnect GCELLSOFT(O ed, you ptional) can infer GBFD-111004
Support Advance Downlink TBF bAdvEstDlTbf Establishment BSC6900
Whether the downlink TBF can be establishe d in advance. Downlink TBF establishm ent in advance indicates that the downlink TBF is establishe d immediatel y after the MS establishes the uplink TBF rather than establishin g the downlink TBF after SET the SGSN BSCPSSOFTPA sends the RA(Optional) data block. GBFD-114101 GPRS
BTS Interface BAKDEVTAB Board Bar Code 2 BSC6900
Bar code 2 of the interface board of the BTS. This parameter is the electronic serial number of the standby PTU board. An electronic serial number uniquely identifies an PTU board. This parameter ADD is set BTSESN(Option before al) delivery. None
None
BAKIP
Backup port IP address
BSC6900
IP address of the IP Fault STR backup Detection IPCHK(Optional) port GBFD-118609 Based on BFD
BAKMASK
Backup port mask BSC6900
Mask of IP Fault STR the backup Detection IPCHK(Optional) port GBFD-118609 Based on BFD
BAKPWRSA Backup Power VMETHOD Saving Method
BSC6900
SET BTSBAKPWR( Mandatory)
This parameter specifies the method of saving the BTS backup power. When this parameter is set to "Turn off TRX", the BSC preferential ly shuts down some TRXs when the BTS experience s a power failure. When this parameter is set to "Reduce Backup Power", the BSC saves the power Active Backup according GBFD-111605 Power Control
BAKPWRSA Backup Power VPOLICY Saving Policy
BSC6900
This parameter specifies the backup power saving policy of the BTS. When this parameter is set to "Cover Priority", the BTS shuts down some TRXs, waits for a certain period of time, and then decreases the power of the BCCH TRX. When this parameter is set to "Capability SET Priority", BTSBAKPWR(O the BTS Active Backup ptional) decreases GBFD-111605 Power Control Whether the cells at the 1900 frequency support SET high Multi-band GCELLSOFT(O frequency Sharing One ptional) 1900 GBFD-114401 BSC Whether the cells at the 850 frequency support SET high Multi-band GCELLSOFT(O frequency Sharing One ptional) 1900 GBFD-114401 BSC
BANDINDIC ATOR1900
High Band Indicator of Cell 1900
BSC6900
BANDINDIC ATOR850
BSC6900
BANDINDIC ATOR900
BSC6900
BANTIME
Forbidden time after MAX Times BSC6900
Whether the cells at the 900 frequency support SET high Multi-band GCELLSOFT(O frequency Sharing One ptional) 1900 GBFD-114401 BSC Duration in which intracell handover is forbidden after the number of consecutiv e intra-cell handovers reaches the maximum. Intra-cell handover can be conducted HUAWEI I SET again only Handover GCELLHOAD(O after this GBFD-110601 HUAWEI II ptional) duration. GBFD-510501 Handover List of bar codes of SET all the BTSRACKBC(M cabinets in andatory) the BTS GBFD-111202 O&M of BTS The reference BTS must support the Um interface ADD software SoftAISSCFG(Mand synchroniz Synchronized atory) ation. GBFD-118201 Network
Cabinet Bar Code BARCODLST List BSC6900
Reference BTS BASEBTSID Index
BSC6900
Temperature BASETEMPE Basis for RATURE Compensation
BSC6900
Number of the temperatur e sensor correspond ing to a battery group. You can choose sensor 1 (Battery1T emp) or sensor 2 (Battery2T emp). If you choose sensor 1, the system automatica lly uses sensor 1 to control the temperatur e of the battery group and performs temperatur e SET compensat BTSAPMUBP(O ion, high ptional) temperatur GBFD-111202 O&M of BTS
Temperature BASETEMPE Basis for RATURE Compensation
BSC6900
Number of the temperatur e sensor correspond ing to a battery group. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS Battery capacity. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS
BATTCAPAC ITY Battery Capacity
BSC6900
Battery BATTENABL Configuration EDIN Enabled
BSC6900
Whether the configurati on of external battery is allowed. The value "YES" indicates that the external battery can be configured, and the value "NO" indicates that the external battery cannot be configured. In multimode scenario, the value of this parameter in one mode must SET be the BTSDPMUBP(O same as ptional) the value GBFD-111202 O&M of BTS
BATTERYDI SCHARGED Battery Discharge EPTH Depth BSC6900
Allowed percentage of the battery dischargin g. After the AC power supply is cut and the power of the battery is discharged by the value of this SET parameter, BTSAPMUBP(O the diesel ptional) engine is SET started to BTSDPMUBP(O supply the ptional) power. GBFD-111202 O&M of BTS Battery type. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS
BATTTYPE
Battery Type
BSC6900
BBAP service BBAPSRVPN listening port No. BSC6900
Number of the BBAP SET service SCTPSRVPOR listening BSC Node T(Optional) port GBFD-113725 Redundancy Reference difference between uplink and downlink levels. This parameter works with "Up Down Balance Floating Processing of Range" to Measurement count Report uplinkPre-processing SET downlink of GTRXRLALM(O imbalance GBFD-110801 Measurement ptional) s. GBFD-110802 Report
BBDIF
Up Down Balance Basic Difference BSC6900
BC
Battery Capcity
BSC6900
Battery capacity. The battery capacity should be set according to the vendor specificatio n. If it is improperly configured, the battery life may be shortened. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSAPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS
BCC
BCC
BSC6900
Base station color code (BCC) of a cell, provided by the network planning department . It is used for differentiati ng the neighborin g cells using the same BCCH frequency. A BCC and a network color code (NCC) compose a base station ADD identity GCELL(Optional code Configuration ) (BSIC). MRFD-210301 Management
BCC
BCC
BSC6900
Base station color code (BCC) of a cell, provided by the network planning department . It is used for differentiati ng the neighborin g cells using the same BCCH frequency. A BCC and a network color code (NCC) compose a base station ADD identity GEXT2GCELL( code Configuration Mandatory) (BSIC). MRFD-210301 Management BTS color code. It uniquely identifies different BTSs that are adjacent ADD and use GCELLQUICKS the same Configuration ETUP(Optional) TRX. MRFD-210301 Management ADD BCCH GEXT2GCELL( frequency Configuration Mandatory) of the cell MRFD-210301 Management ADD GCELLQUICKS ETUP(Mandator y) Frequency of the BCCH Frequency TRX GBFD-110101 Band
BCC
BCC
BSC6900
BCCH
BCCH FD
BSC6900
Main BCCH BCCHFREQ Frequency
BSC6900
Frequency BCCHTRXH Hopping Mode of P BCCH TRX BSC6900
Frequency hopping SET mode of GCELLHOPQUI the TRX CKSETUP(Man that carries datory) the BCCH GBFD-113701
Frequency Hopping (RF hopping, baseband hopping)
BCCONGES TALMBOUN BC Congestion D Alarm Threshold
BSC6900
Threshold for reporting the BC congestion alarm. When the BC congestion level exceeds the threshold, the BC SET congestion BSCPSSOFTPA alarm is RA(Optional) reported. GBFD-510002 Gb Over FR Threshold for clearing the BC congestion alarm. When the BC congestion level is below the threshold, the BC SET congestion BSCPSSOFTPA alarm is RA(Optional) cleared. GBFD-510002 Gb Over FR DSCP correspond SET ing to the BSCPSTCDSC backgroun PMAP(Optional) d service GBFD-118603 Gb over IP
BCCONGES BC Congestion TRESALMB Restore Alarm OUND Threshold
BSC6900
BCDSCP
DSCP of BG[QoS]
BSC6900
BCID
BC Identifier
BSC6900
BCLC
Battery Current Limiting Coefficient
BSC6900
Identifies one BC at the Gb interface board. The STR BCID's FRPORTLOOP( value Mandatory) range of BLK PEUa BC(Mandatory) board is ADD 0~255 and BC(Mandatory) that of ADD POUc NSVC(Mandator board is y) 0~511. GBFD-510002 Gb Over FR Current limit coefficient of the battery. The maximum charging current equals the value of "Battery Current Limiting Coefficient " multiplexed by "Battery Capacity". If the charging current is 5 A higher than the maximum charging current, the overcharge alarm is reported. In multiSET mode BTSAPMUBP(O scenario, ptional) the value GBFD-111202 O&M of BTS
BCV
Boost-Charging Voltage
BSC6900
BoostCharging Voltage. See the vendor specificatio n for the setting of this parameter. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSAPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS Whether the configurati on of external battery is allowed. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSAPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS
BE
Battery Configuration Enabled
BSC6900
BEARP1PRI BestEffort-ARP1 WEIGHT Priority Weight
BSC6900
ARP1 priority in the BE service. ARP1 priority weight determines the number of the budget blocks and SET the block GCELLPSCHM( scheduling QoS Optional) priority. GBFD-119902 ARP&THP ARP2 priority in the BE service. ARP2 priority weight determines the number of the budget blocks and SET the block GCELLPSCHM( scheduling QoS Optional) priority. GBFD-119902 ARP&THP ARP3 priority in the BE service. ARP3 priority weight determines the number of the budget blocks and SET the block GCELLPSCHM( scheduling QoS Optional) priority. GBFD-119902 ARP&THP
BSC6900
BSC6900
BEARTYPE
DSP bear type
BSC6900
DSP bearer type. MTP3: indicates that the lower layer bearer is the MTP3 used in ATM/TDM scenario; M3UA: indicates that the lower layer bearer is the M3UA used in IP scenario; MTP3_M3 UA: indicates that the lower layer bearer is A Interface the MTP3 Protocol and M3UA Process used in ADD ATM/TDM/ STPSignalin N7DPC(Mandat IP GBFD-111804 g Transport ory) scenario. GBFD-111806 Point) Time interval for sending a handshake message between BSC6900s . The parameter checks whether the communic ation among BSCs in a SET redundanc GBSCREDGRP( y group is BSC Node Optional) normal. GBFD-113725 Redundancy
Interval for BEATSENDI Sending NGDIS Heartbeat
BSC6900
BEPPERIOD Bep Period
BSC6900
Average period for sending the measurem ent report SET over the GCELLEGPRSP EGPRS ARA(Optional) channel GBFD-114201 EGPRS Number of UTRAN TDD cells that should be SET included in GSM/TDGCELLCCUTRA measurem SCDMA NSYS(Optional) ent report GBFD-114302 Interoperability SET GCELLHOUTR ANFDD(Optional ) SET GCELLHOUTR ANTDD(Optiona l) This parameter specifies whether to GSM/WCDMA allow 3G Interoperability better cell GSM/TDhandover GBFD-114301 SCDMA algorithm. GBFD-114302 Interoperability
BESTTDDCE Best TDD Cell LLNUM Number
BSC6900
BET3GHOE N
Better 3G Cell HO Allowed
BSC6900
BETTERCEL Better Cell LHOEN Handover Enable BSC6900
Whether to enable the algorithm for the SET handover GCELLHOBASI to a better HUAWEI II C(Optional) cell GBFD-510501 Handover
BETTERCEL Better Cell HO LLASTTIME Valid Time
BSC6900
According to the P/N rule, if the conditions for the handover to a better cell due to interferenc e are met for P seconds within N seconds, the handover is triggered. This parameter ADD specifies G2GNCELL(Opti the number HUAWEI II onal) P. GBFD-510501 Handover According to the P/N rule, if the conditions for the handover to a better cell due to interferenc e are met for P seconds within N seconds, the handover is triggered. This parameter ADD specifies G2GNCELL(Opti the number HUAWEI II onal) N. GBFD-510501 Handover
BETTERCEL Better Cell HO LSTATTIME Watch Time
BSC6900
BFDDETECT Detect multiplier COUNT of BFD packet
BSC6900
Timeout times of the BFD packet. If several consecutiv e BFD packets are not received, the BFD session is set to the IP Fault STR DOWN Detection IPCHK(Optional) state. GBFD-118609 Based on BFD ADD BTSBFD(Manda tory) ADD BFD IP Fault BTSIPRTBIND( Session Detection Mandatory) No. GBFD-118609 Based on BFD Allowed fluctuation of the difference between uplink and downlink levels relative to the reference difference. If the difference between uplink and downlink levels is outside the fluctuation range, the uplink and downlink are considered imbalance d. For Processing of example, Measurement assume Report that the Up Pre-processing SET Down of GTRXRLALM(O Balance GBFD-110801 Measurement ptional) Basic GBFD-110802 Report
BFDSN
BFD Session No. BSC6900
BFRANGE
Up Down Balance Floating Range BSC6900
Switchback Policy BHPREPOLI of Baseband FH CY Mutual Aid BSC6900
SET GCELLCCACC ESS(Optional) SET BTSEXCURSIO N(Mandatory) SET BSCSYNCOFF( Mandatory)
Mutual-aid changebac k policy of baseband frequency hopping (FH). If multiple TRXs in a baseband FH group are faulty and changebac k is needed after mutual aid of the baseband FH TRXs occurs: If you choose ALL, mutual-aid changebac k is implement ed after all the TRXs in the FH group TRX recover; if GBFD-113801 Cooperation
BITOFFSET
In Frame Bit Offset [1/8 bit]
BSC6900
Bit offset in the frame Softof the BTS Synchronized clock GBFD-118201 Network
BackgroundBKGARP1PR ARP1 Priority IWEIGHT Weight
BSC6900
ARP1 priority in the Backgroun d service. ARP1 priority weight determines the number of the budget blocks and SET the block GCELLPSCHM( scheduling QoS Optional) priority. GBFD-119902 ARP&THP ARP2 priority in the Backgroun d service. ARP2 priority weight determines the number of the budget blocks and SET the block GCELLPSCHM( scheduling QoS Optional) priority. GBFD-119902 ARP&THP ARP3 priority in the Backgroun d service. ARP3 priority weight determines the number of the budget blocks and SET the block GCELLPSCHM( scheduling QoS Optional) priority. GBFD-119902 ARP&THP
BSC6900
BSC6900
BLKFILTERS Alarm switch of W blinking filter
BSC6900
Base Station SET Controller ALMBLKSW(Op alarm blink Faulty tional) filter switch MRFD-210304 Management
BLKPRD
Alarm blink threshold
BSC6900
Alarm blink filter threshold. When the interval between the generation and clearance of an alarm is equal to or smaller than the alarm blink filter threshold, the alarm is filtered SET and not ALMBLKPARA( reported to Faulty Optional) the NMS. MRFD-210304 Management
Observing time BLKSTATPR window of D statistical alarm
BSC6900
Measurem ent period of filtered Base SET Station ALMBLKSW(Op Controller Faulty tional) alarms MRFD-210304 Management
Switch of statistics blinking BLKSTATSW alarm BSC6900
Switch controlling whether to perform statistics of Base SET Station ALMBLKSW(Op Controller Faulty tional) alarms MRFD-210304 Management Retry times after the peer response timer expires SET during BSCNSPARA(O NSVC ptional) blocking GBFD-510002 Gb Over FR Duration of the peer response timer SET during BSCNSPARA(O NSVC ptional) blocking GBFD-510002 Gb Over FR Number of the port in the BM subrack where one end of the ATER connection channel is located None Number of the slot in the BM subrack where one end of the ATER connection channel is located None
BLOCKRETR Y Block Retry
BSC6900
BLOCKTIME R Block Timer
BSC6900
BMPN
BM Port No
BSC6900
ADD ATERCONPAT H(Mandatory)
None
BMSN
BM Slot No
BSC6900
None
BMSRN
BM Subrack No
BSC6900
Number of the BM subrack where one end of the ATER connection channel is located None
None
Timer Length of BMTCFCTim BM-TC Flow erLen Control
BSC6900
Duration of the flow control protection timer enabled during the flow control between the TCS SET and the BSCTMR(Optio MPS/EPS GSM Flow nal) subracks GBFD-111705 Control
BORROWDE VIP Borrow DevIP
BSC6900
Whether to use the device IP address as the local IP address. When this parameter is set to "YES", the device IP address is used as the local IP address of the PPP link. When this parameter is set to "NO", the device IP address is not used as the local IP address of the PPP ADD link. In this PPPLNK(Manda case, you tory) need to Abis IP over ADD reconfigure E1/T1 MPGRP(Mandat the local IP GBFD-118611 A IP over ory) address of GBFD-118622 E1/T1 Whether to report the SET alarm to BOXRPT(Manda the alarm Faulty tory) box MRFD-210304 Management Position of break point 1 in an RXU chain. The number of break points must not be greater than the number of RXU SET boards in BTSBREAKPOI the RXU NT(Optional) chain. GBFD-111202 O&M of BTS
BOXFLG
To Alarm Box Flag
BSC6900
BP1
Position of Break Point 1 BSC6900
BP2
Position of Break Point 2 BSC6900
BQHOEN
BQ HO Allowed
BSC6900
Position of break point 2 in an RXU chain. The number of break points must not be greater than the number of RXU SET boards in BTSBREAKPOI the RXU NT(Optional) chain. GBFD-111202 O&M of BTS Whether to enable the bad quality (BQ) handover algorithm. Whether to trigger BQ handover depends on the uplink and downlink transmit quality (measured by using BER). If the uplink or downlink BQ exceeds the BQ handover threshold, emergency BQ handover is triggered. The HUAWEI I SET possible Handover GCELLHOBASI causes of GBFD-110601 HUAWEI II C(Optional) BER GBFD-510501 Handover
BQLASTTIM BQ HO Valid E Time
BSC6900
According to the P/N rule, if the conditions for emergency BQ handover are met in P of N measurem ent reports, the handover is triggered. This parameter ADD specifies G2GNCELL(Opti the number HUAWEI II onal) P. GBFD-510501 Handover If ("downlink level of the neighbor cell after filtering" "downlink level of the serving cell (after power control compensat ion)") > ("Inter-cell HO Hysteresis" - "BQ HO Margin" + 64), the BQ handover to the HUAWEI I ADD neighbor Handover G2GNCELL(Opti cell is GBFD-110601 HUAWEI II onal) triggered. GBFD-510501 Handover
BQMARGIN
BQ HO Margin
BSC6900
BQSTATTIM BQ HO Watch E Time
BSC6900
According to the P/N rule, if the conditions for emergency BQ handover are met in P of N measurem ent reports, the handover is triggered. This parameter ADD specifies G2GNCELL(Opti the number HUAWEI II onal) N. GBFD-510501 Handover Classes of boards classified according STR to function Configuration BKP(Mandatory) modules MRFD-210301 Management SET FCSW(Mandato ry) SET FCCPUTHD(Ma ndatory) SET FCMSGQTHD( Mandatory)
BRDCLASS
Board Class
BSC6900
BRDCLASS
Board Class
BSC6900
Classes of boards classified according to function Configuration modules MRFD-210301 Management
BRDCLASS
Board Class
BSC6900
Classes of boards classified SET according CPUTHD(Mand to function Configuration atory) modules MRFD-210301 Management Classes of boards classified according ADD to function Configuration BRD(Mandatory) modules MRFD-210301 Management STR BTSLOG(Manda Number of tory) the board GBFD-111202 O&M of BTS
BRDCLASS
Board Class
BSC6900
BRDNO
Board No.
BSC6900
BRDNO
Board No.
BSC6900
Number of the RF STR front-end BTSVSWRTST( board in Optional) the BTS GBFD-111202 O&M of BTS The upper threshold of the total receive bandwidth of all the TRXs bound to the board, for example, when this value is 250, it means the the total ADD receive BTSBRDCAP(M bandwidth andatory) should be ADD no more BTSRXUBRD(O than ptional) 25Mbits/s. GBFD-111202 O&M of BTS
BRDRXBW
Receive Bandwidth
BSC6900
BRDSWTYP BTS Board E Software Type
BSC6900
LOD Software BTSSW(Mandat type of the ory) BTS board GBFD-111202 O&M of BTS
BRDTXBW
Forward Bandwidth
BSC6900
BRDTYPE
Board Type
BSC6900
The upper threshold of the total send bandwidth of all the TRXs bound to send pass of board, for example, when this value is 150, it means the the total ADD send BTSBRDCAP(M bandwidth andatory) should be ADD no more BTSRXUBRD(O than ptional) 15Mbits/s. GBFD-111202 O&M of BTS SET DPUBRDTYPE( Type of the Configuration Mandatory) board MRFD-210301 Management
BRDTYPE
Board Type
BSC6900
ADD BRD(Optional) SET ETHPORT(Man datory) ADD PPPLNK(Manda tory) ADD MPGRP(Mandat ory) ADD MPLNK(Mandat ory) ADD BTSBRDCAP(M andatory)
Type of the Configuration board MRFD-210301 Management
BRDTYPE
Board type.
BSC6900
Board type None
None
BRDTYPE
Board type
BSC6900
Board type None
None
BRDTYPE
Board type
BSC6900
Board type None
None
BRDTYPE
Board type
BSC6900
BrdType
Board Type
BSC6900
Board type None None Type of the new RXU board. GBFD-111202 O&M of BTS
BRDTYPE
Board Type
BSC6900
Type of the board. The type can be TMU/DTM U, DTRU, DPTU, QTRU, MRRU, GRRU, BTS3900B , MRFU, GRFU, BTS3900E , DRFU, STR DRRU, BTSLOG(Manda UBRI or tory) UTRP. GBFD-111202 O&M of BTS To avoid intermittent blinking, the switchover cannot be performed over a certain period of time when the OML is disconnect ed. That period of time is specified as ring II SET wait time Fast Ring BTSRINGATTR( before Network Optional) switch. GBFD-117802 Switch Contents SET of a cell GCELLSBC(Opt broadcast ional) message
Ring II Wait Time BREAKTIME Before Switch BSC6900
BROADCAS Broadcast TCONTENT Content
BSC6900
Simplified Cell GBFD-113602 Broadcast
BROADCAS Broadcast TINTERVAL Interval
BSC6900
Time interval for SET a cell GCELLSBC(Opt broadcast Simplified Cell ional) message GBFD-113602 Broadcast
BS
Backup Style
BSC6900
Backup mode of the log. If "ENTIRE" is selected, all logs in the current database are backed up. If "INCREME NTAL" is selected, the logs generated BKP after last O&M of BSC LOGDB(Optiona backup are GBFD-111203 Security l) backed up. MRFD-210305 Management BS-AGBLKSRES, indicating the number of the CCCH message blocks reserved for the AGCH. After the CCCHs are configured, the value of this parameter indicates the actual seizure Radio rates of the Common AGCHs Channel and the Management PCHs over GBFD-111003 Location the GBFD-110301 Updating CCCHs. GBFD-110303 Paging
CCCH Blocks BSAGBLKSR Reserved for ES AGCH
BSC6900
BSCDPC
External BSC DPC
BSC6900
DPC of the external BSC, which is used for inter-BSC communic ation. This parameter can be represente d in decimal, hexadecim al, and binary. By default, this parameter is represente d in decimal. To represent this parameter in hexadecim al, precede this ADD parameter EXTBSC(Manda value with tory) H'. To GBFD-118602 A over IP This parameter specifies whether to enable the TRX SET Intelligent BSCDSTPA(Opt Shutdown ional) feature. GBFD-111602
BSCDynSwit Allow Dynamic chTrxPAAllo Shutdown of TRX w by BSC BSC6900
TRX Power Amplifier Intelligent Shutdown
BSCFLAG
BSC Flag
BSC6900
It indicates whether the A interface BLK E1/T1 is ACIC(Mandatory the primary ) BSC6900 A Interface ADD or Circuit AE1T1(Mandato secondary GBFD-111803 Management ry) BSC6900. GBFD-113726 TC Pool
BSCGATEW AYIP BSC GateWay IP BSC6900
Gateway IP address of the BSC6900. When the BSC provides the function of simple cell broadcast, the BSC6900 sends cell broadcast messages through this IP address ADD defined by GCBSADDR(Ma this ndatory) parameter. GBFD-113601
Short Message Service Cell Broadcast (TS23)
BSC Offset Information Collection End BSCGATHET Time
BSC6900
End time for collecting ADD the interSoftAISSCFG(Optio BSC offset Synchronized nal) information GBFD-118201 Network Start time for collecting ADD the interSoftAISSCFG(Optio BSC offset Synchronized nal) information GBFD-118201 Network Ater Uniquely Compression ADD identifies a GBFD-116902 Transmission ADJNODE(Man BSC in the GBFD-118605 IP QOS datory) TC pool GBFD-113726 TC Pool ID of the BSC that ADD controls GEXT2GCELL( the Optional) external ADD 2G EXTBSC(Manda neighbor tory) cell
BSC Offset Information Collection Start BSCGATHST Time
BSC6900
BSCID
BSC ID
BSC6900
BSCIDX
BSC Index
BSC6900
Configuration MRFD-210301 Management
BSCINCHPR BSC Fine Tuning D Period BSC6900
Period for fine tuning the BTS ADD clock SoftAISSCFG(Optio between Synchronized nal) BSCs GBFD-118201 Network
BSCIP
BSC IP
BSC6900
IP address of the BSC6900. If the connection mode of the BSC6900 and the CBC is to lead cables out of the PIU, the value of this parameter must be the same as the preset IP address of the PIU port. If the connection mode is to lead cables out of the XPU panel, the value of ADD this GCBSADDR(Ma parameter ndatory) must be GBFD-113601 ADD BTSAUTOPLAN (Mandatory) SET BTSIP(Optional) IMP BTSIPPARA(Ma ndatory)
BSCIP
BSC IP
BSC6900
IP address of an interface board on the BSC6900 side GBFD-118601 Abis over IP
BscLsStartM Options for BSC ode Local Switch
BSC6900
Conditions for enabling the function of BSC local switching. UNCONDI TIONALST ART: The function of BSC local switching is enabled without restriction. ATERCON GESTS: The function of BSC local switching is enabled when the congestion rate of the Ater interface exceeds the value of "Ater SET Cong BSSLS(Optional Thres for BSC Local ) BSC GBFD-117701 Switch Unique name of ADD the EXTBSC(Manda external tory) BSC
BSCNAME
External BSC Name
BSC6900
Connection Inter BSC over GBFD-118621 IP
BSCPMA
Preemption Allowed
BSC6900
Whether to allow highpriority calls to preempt the radio resources of lowpriority calls when radio resources are insufficient. GBFD-115001
Enhanced Multi Level Precedence and Preemption(E MLPP)
Preemption Allowed During BSCPMAIRA Intra-BSC HO Handover
BSC6900
Whether to allow the call during an intraBSC emergency handover to preempt the radio resources of lowpriority calls in the target cell. GBFD-115001
BSCPN
In-BSC Port No.
BSC6900
InBSC6900 port No. of ADD the SemiBTSMONITORT monitoring Permanent S(Mandatory) timeslot GBFD-114701 Connection Port number used for the communic ation between the ADD BSC6900 GCBSADDR(Ma and the ndatory) CBC GBFD-113601
BSCPORT
BSC Port
BSC6900
eMLPP MultiBSCPRICLA Priority Classes SS Allowed
BSC6900
Whether to allow the eMLPP priorities to be classified into two types: high priority and normal priority. If this parameter is set to YES, then during the resource preemption , the priorities of all the services are compared, and the resources are assigned to the services with a higher priority. If this GBFD-115001
BSCQAD
Queue Allowed
BSC6900
Whether to allow calls to queue for radio resources when radio resources are insufficient. GBFD-115001
Queuing Allowed BSCQADIRA During Intra-BSC HO Handover BSC6900
Whether to allow the service during an intra-BSC emergency handover to queue for radio resources in the target cell. GBFD-115001
BSCRESER Reserved VEDPARA1 parameter 1
BSC6900
Reserved parameter 1 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 10 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 11 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 12 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 13 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 14 that is effective at the BSC Configuration level MRFD-210301 Management
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
Reserved parameter 15 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 16 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 17 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 18 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 19 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 2 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 20 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 21 that is effective at the BSC Configuration level MRFD-210301 Management
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
Reserved parameter 22 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 23 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 24 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 25 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 26 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 27 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 28 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 29 that is effective at the BSC Configuration level MRFD-210301 Management
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
Reserved parameter 3 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 4 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 5 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 6 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 7 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 8 that is effective at the BSC Configuration level MRFD-210301 Management Reserved parameter 9 that is effective at the BSC Configuration level MRFD-210301 Management
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSCSN
In-BSC Slot No.
BSC6900
InBSC6900 slot No. of ADD the SemiBTSMONITORT monitoring Permanent S(Mandatory) timeslot GBFD-114701 Connection
BSCSRN
In-BSC Subrack No.
BSC6900
BSCSUBTS
In-BSC Sub Timeslot No.
BSC6900
InBSC6900 subrack ADD No. of the SemiBTSMONITORT monitoring Permanent S(Mandatory) timeslot GBFD-114701 Connection InBSC6900 subtimeslot No. of the monitoring timeslot. If the added monitoring timeslot works at 64 kbit/s, the subtimeslots are numbered from 0. If the added monitoring timeslot works at 32 kbit/s, the subtimeslots are numbered from 0 or 4. If the added monitoring timeslot ADD works at SemiBTSMONITORT 16 kbit/s, Permanent S(Mandatory) the subGBFD-114701 Connection When the BTS clock is adjusted, the offset is added to obtain better SET network SoftBSCAISS(Mand performan Synchronized atory) ce. GBFD-118201 Network
BSCSYMOF BSC Symbol F Offset
BSC6900
BSCTID
ID of BSC in TC Pool
BSC6900
BSCTID
ID of a BSC in TC Pool BSC6900
ADD ATERE1T1(Man datory) ADD ATERSL(Manda tory) ADD SEMILINK(Mand atory) SET BSCBASIC(Man datory)
ID of the BSC at the other end of the link. In non-TC pool scenario, this parameter specifies the ID of the primary BSC. In TC pool scenario, this parameter specifies the ID of the BSC that is at the other end of the link. GBFD-113726 TC Pool ID of slave BSC in TC Pool GBFD-113726 TC Pool
BSCTS
In-BSC Timeslot No.
BSC6900
InBSC6900 timeslot ADD No. of the SemiBTSMONITORT monitoring Permanent S(Mandatory) timeslot GBFD-114701 Connection
BSCVMAX
BS_CV_MAX
BSC6900
This parameter is used to set the parameter BS_CV_M AX for MS countdown . This parameter is used for the MS to calculate the CV. This parameter also determines the duration of the timer T3198. When the MS sends one uplink RLC data block, the receiving state of this data block is set SET to Pending GCELLPSBASE and the (Optional) timer GBFD-114101 GPRS
BSMSPWRL Transfer BTS/MS EV Power Class BSC6900 BSPAGBLKS Number of RES PAGCH Blocks
BSC6900
Whether to enable the BTS to transfer BTS/MS Pre-processing SET power of GCELLHOCTRL class to Measurement (Optional) the BSC GBFD-110802 Report ADD Number of GCELL(Optional PAGCH Configuration ) blocks MRFD-210301 Management
BSPAMFRA MS
Multi-Frames in a Cycle on the Paging CH BSC6900
BSPBCCHBL Number of KS PBCCH Blocks BSPRACHBL Number of KS PRACH Blocks
BSC6900
BSC6900
Number of multiframe s in a cycle on a paging subchannel. In fact, this parameter specifies the number of paging subchannels that a paging channel in a cell is divided into. In an actual network, an MS does not listen to other paging subchannels but its belonging paging subSET channel GCELLIDLEBA only. Refer GBFD-110303 SIC(Optional) to GSM GBFD-111003 ADD Number of GCELL(Optional PBCCH ) blocks MRFD-210301 ADD Number of GCELL(Optional PRACH ) blocks MRFD-210301
Paging Radio Common Channel Management Configuration Management Configuration Management
BSS Local BssLsGenMo Switching de General Strategy BSC6900
BSSLSMSC COOP
MSCCollaborated BSS Local Switching BSC6900
General strategy of the BSS local switching, which includes the BSC local switching and the BTS local switching. The two functions cannot be SET enabled at BSSLS(Optional the same ) time. Type of the BSS local switching with the cooperatio n of the MSC. NONSUPP ORT: When performing local switching, the BSS need not determine whether the MSC allows an MS to be involved in local switching. BASIC: Assignmen t request messages and handover request messages ADD sent by the GCNNODE(Opti MSC onal) contain a
BSC Local Switch GBFD-117701 BTS Local GBFD-117702 Switch
BSC Local Switch GBFD-117701 BTS Local GBFD-117702 Switch
BSSPAGING COORDINAT BSS Paging CoION ordination
BSC6900
Whether to support the paging function of the CS domain of the A interface. Yes: the MS can be called upon paging request on the A interface when handling the PS service; No: the MS cannot be called upon paging request on the A interface when handling the PS BSS Paging SET service. Coordination GCELLPSBASE This GBFD-119305 BSS Paging (Optional) parameter GBFD-119305 Coordination SET Type of the BSC/RNC CLK(Mandatory) board MRFD-210502 Clock
BT
Board type
BSC6900
BT
Board type
BSC6900
CON BSC/RNC PATCH(Mandat Type of the Software ory) board MRFD-210401 Management
BT
Board type
BSC6900
LOD PATCH(Mandat ory) BSC/RNC LOD Type of the Software BRD(Mandatory) board MRFD-210401 Management
BT
Board type
BSC6900
BT
Board type
BSC6900
SET E1T1LOP(Mand atory) SET E1T1(Mandatory ) Board type None LOP E1T1(Mandatory ) Board type None STR E1T1TST(Mand atory) Board type None
None
None
BT
Board type
BSC6900
None
BT
Board type
BSC6900
SET OPT(Mandatory) Board type None SET COPTLNK(Man datory) Board type None ADD IPLOGICPORT( Mandatory) Board type None CHK E1T1CRS(Mand atory) Board type None
None
BT
Board Type
BSC6900
None
BT
Board Type
BSC6900
None
BT
Board type
BSC6900
None
BT
Board Type
BSC6900
Type of the board that controls the RET antenna. 1. DATU: It may represent the DATU or the DATM and is applicable to the BTS3012, BTS3012A E, BTS3012_I I, BTS3006C , and BTS3002E . 2. GATM: It is applicable to the BTS3900 GSM, BTS3900A GSM, ADD BTS3036, BTSRETANT(M and Remote andatory) BTS3036A MRFD-210602 Electrical Tilt
BT
Board Type
BSC6900
ADD BTSANTFEEDE RBRD(Mandator y)
Type of the newly added antenna board GBFD-111202 O&M of BTS
BT
Board Type
BSC6900
Type of the ADD newly BTSBRD(Manda added tory) board GBFD-111202 O&M of BTS
BT
Board Type
BSC6900
Type of the ADD newly BTSRXUBRD(M added andatory) RXU board GBFD-111202 O&M of BTS
BT
Board Type
BSC6900
ADD BTSTRXBRD(M Type of the andatory) board GBFD-111202 O&M of BTS
BT
Board Type
BSC6900
SET BTSANTFEEDE RCONNECT(Ma Type of the ndatory) board GBFD-111202 O&M of BTS The configurati on flag specifies the Ater Interface ADD operation 4:1 ATERE1T1(Man is on the GBFD-111801 Multiplexing datory) BM or TC. GBFD-113726 TC Pool
BTCFLAG
BM/TC config flag BSC6900
BTCFLAG
BM/TC config flag BSC6900
Identifies the BM subrack or TC subrack of the BSC. When this parameter is set to "CFGBM", a BM signaling link is added. When this parameter is set to "GFGTC", a TC ADD signaling Ater Interface ATERSL(Manda link is 4:1 tory) added. GBFD-111801 Multiplexing This parameter specifies whether to enable the TRX Working Voltage Adjustment feature. When this parameter is set to YES, the BSC6900 supports the feature where the power amplifier can use different working voltages in different SET TRX GCELLBASICP modulation GBFD-111202 ARA(Optional) modes. GBFD-111611 O&M of BTS
BTSadjust
Adjust Voltage
BSC6900
BTSBARCO DE BTS Bar Code
BSC6900
SET BTSOMLDETE CT(Mandatory)
Bard code of BTS BBU board. GBFD-111202 O&M of BTS
BTS BTSCOMTY Communication PE Type
BSC6900
Communic SET ation type BTSIP(Optional) of a BTS GBFD-118601 Abis over IP
BTS BTSCOMTY Communication PE Type
BSC6900
IMP Communic BTSIPPARA(Ma ation type ndatory) of a BTS GBFD-118601 Abis over IP Peer equipment type of the BTS. This parameter indicates whether to connect the BTS to the BSC6900 or cascade the BTS to another BTS. GBFD-111202 O&M of BTS
BTSDESC
BTS Description
BSC6900
ADD BTS(Optional)
BTSDETECT BTS Detect SWITCH Switch
BSC6900
BTSID
Site Index
BSC6900
BTS detection switch. If the parameter is set to "CLOSE", the function of detecting the BTS is disabled. If the parameter is set to "OPEN", the function of detecting the BTS is enabled. When the function of detecting the BTS is enabled, the BSC6900 performs addressing according SET to the BTS BTSOTHPARA( IP address Optional) and sends GBFD-118601 Abis over IP BTS index of the adjacent node to be added. The parameter is valid only when Adjacent ADD node type ADJNODE(Man is set to datory) Abis. GBFD-118605 IP QOS
BTSID
BTS Index
BSC6900
SET BTSEXCURSIO N(Mandatory) SET BSCSYNCOFF( Mandatory) SET BTSAISS(Mand atory) ADD BTSESN(Manda tory) SET GMRSCOPE(M andatory) ADD CELLBIND2BTS (Mandatory) SET BTSBAKPWR( Mandatory) SET BTSCRC4(Man datory) SET BTSLOCKBCC H(Mandatory) SET BTSLSW(Mand atory) SET BTSTRANS(Ma ndatory) SET SET BSCABISPRIM AP(Mandatory)
Index of the BTS, uniquely identifying a BTS in a BSC6900. GBFD-111202 O&M of BTS Index of the BTS running the command GBFD-111202 O&M of BTS
BTSID
BTS Index
BSC6900
BTSIDCONB Connect BSC SC BTS Index
BSC6900
Number of the BTS connected to the ADD BSC. The BTSABISHDLC number is Abis PATH(Mandator unique in a Transmission y) BSC GBFD-118401 Optimization
BTSIDLST
BTS Index List
BSC6900
List of BTS indexes. You can specify LOD multiple BTSSW(Mandat BTSs,sepa ory) rated by LOD "&" and BTSPATCH(Ma "&&". For ndatory) example, CON "1&2&3&4 BTSPATCH(Ma &5" or ndatory) "1&&5". GBFD-111202 O&M of BTS Whether to collect offset information COL by BTS SoftSYNCINFO(Man index or Synchronized datory) BTS name GBFD-118201 Network Index type of the BTS. BYNAME: query by BTS name; SET BYID: BTSANTANGLE query by Remote (Mandatory) BTS index. MRFD-210602 Electrical Tilt Base station index, 65535 ADD indicate all BTSOP(Mandat base Security ory) stations. MRFD-210305 Management
BTSIDTYPE BTS Index Type
BSC6900
BTSIDTYPE BTS Index Type
BSC6900
BTSIDX
Site Index Collect BSC6900
BTSIP
BTS IP
BSC6900
IP address of a BTS. When "BTS Com Type" is set to "LOGICIP" , the value of the parameter is the IP address of the BTS. When "BTS Com Type" is set to "PORTIP", the value of the parameter is the IP address of the BTS ethernet port. When ADD "BTS Com BTSAUTOPLAN Type" is (Mandatory) set to SET "PPPLNK" BTSIP(Optional) or IMP "MPGRP", BTSIPPARA(Ma the value ndatory) of the GBFD-118601 Abis over IP
BtsLsStartMo Options for BTS de Local Switch
BSC6900
BTSMASK
Subnet Mask
BSC6900
Conditions for enabling the function of BTS local switching. UNCONDI TIONALST ART: The function of BTS local switching is enabled without restriction. ABISCON GESTS: The function of BTS local switching is enabled when the congestion rate of the Abis interface exceeds the value of "Abis SET Cong BSSLS(Optional Thres for BTS Local ) BTS GBFD-117702 Switch ADD Subnet BTSAUTOPLAN mask of (Mandatory) BTS. GBFD-118601 Abis over IP
BTSMESRPT MR.Preprocessin PREPROC g BSC6900
Whether to enable the BTS to preprocess measurem ent reports. This parameter determines where to SET conduct GCELLHOCTRL power (Optional) control. GBFD-110802
Pre-processing of Measurement Report
BTSNAME
BTS Name
BSC6900
SET BTSEXCURSIO N(Mandatory) SET BSCSYNCOFF( Mandatory) SET BTSAISS(Mand atory) ADD BTSESN(Manda tory) SET BSCABISPRIM AP(Mandatory) ADD CELLBIND2BTS (Mandatory) SET BTSBAKPWR( Mandatory) SET BTSCRC4(Man datory) SET BTSLOCKBCC H(Mandatory) SET BTSLSW(Mand atory) SET BTSTRANS(Ma ndatory) SET
Name of the BTS, uniquely identifying a BTS in a BSC6900. This parameter cannot contain , ; = " ' more than two (include two) %, more than two (include two) space, more than three (include three) +. GBFD-111202 O&M of BTS
BTSNAMEC Connect BSC ONBSC BTS Name
BSC6900
Connect BSC BTS Name.It is unique in one BSC.This parameter cannot ADD contain ? | BTSABISHDLC : < > " @ # Abis PATH(Mandator ! % ^ & * . [ Transmission y) ] / \ \\ '. GBFD-118401 Optimization
BTSNAMELS T BTS Name List
BSC6900
List of BTS names. LOD You can BTSSW(Mandat specify ory) multiple LOD BTSs, BTSPATCH(Ma separated ndatory) by "&". For CON example, BTSPATCH(Ma "Name1&N ndatory) ame2". GBFD-111202 O&M of BTS If the parameter is set to "ON", all the Ping packets are sent. If the parameter is set to "OFF", all the Ping SET packets BTSPINGSW(O are ptional) discarded. GBFD-118601 Abis over IP
BTSPINGSW ITCH BTS Ping Switch BSC6900
BTSPOWER OFFLOCKBC BTS Power-off CH Lock BCCH
BSC6900
SET BTSLOCKBCC H(Mandatory)
This parameter specifies whether the BSC is allowed to shut down the BCCH TRX that is configured as "Shut Down Enabled" to save power after the BSC receives a power failure message from the BTS. When this parameter is set to Yes, the BSC shuts down all the TRXs that are configured as "Shut Down Active Backup Enabled", GBFD-111605 Power Control
BTSPWRNU M BTS PC Class
BSC6900
Maximum degree by which the BSC can control the power of SET the BTS Enhanced GCELLPWR2(O dynamicall Power Control ptional) y GBFD-110703 Algorithm
Switch for BTS BTSSAICPC Supporting SAIC ADJSWITCH PC Adjust BSC6900
Whether to specify "Power Control threshold Adjust for SAIC" in the MML command SET "SET GCELLSOFT(O GCELLPW Network ptional) R3" GBFD-118103 Support SAIC Software LOD version BTSSW(Mandat number of ory) the BTS GBFD-111202 Transmissi on compressi on ratio of a BTS. 1. Modifying the settings of "Transfers Compress Rate" may change the bandwidth required by the BTS. That is, the current bandwidth may be excessive or insufficient. If the bandwidth is insufficient, more secondary links should be added or SET timeslots BTSTRCMPR(M should be andatory) rearranged GBFD-118401
BTS Software BTSSWVER Version
BSC6900
O&M of BTS
Transmission BTSTRCMP Compression RATE Ratio
BSC6900
Abis Transmission Optimization
BTSTYPE
BTS Type
BSC6900
ADD BTS(Mandatory) SET BTSALM(Manda Type of the tory) BTS GBFD-111202 O&M of BTS ADD BTSAUTOPLAN (Mandatory) SET BTSAUTOPLAN Type of the CFG(Mandatory) BTS GBFD-510701
BTSTYPE
BTS Type
BSC6900
Compact BTS Automatic Configuration and Planning
BTSTYPE
BTS Type
BSC6900
LOD BTSPATCH(Ma ndatory) CON BTSPATCH(Ma Type of the ndatory) BTS GBFD-111202 O&M of BTS Time for which the BTS waits ADD to restore a IP Fault BTSBFD(Option BFD Detection al) session GBFD-118609 Based on BFD Type of STR TRX BTSTST(Manda loopback tory) test
BTSWTR
Time for Waiting to Restore
BSC6900
BTTSTTYPE BT Test Type
BSC6900
BTS Test GBFD-111207 Function
BTYPE
Battery Type
BSC6900
BUILDTIME
Ring II Try Rotating Duration Time BSC6900
Battery type. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSAPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS If the OML is not establishe d at one port after a period of time, the OML switches to another port and tries to connect to this port. That period of time is called ring SET II rotating Fast Ring BTSRINGATTR( duration Network Optional) time. GBFD-117802 Switch Whether to enable the ADD data SCTPLNK(Optio binding nal) function GBFD-118602 A over IP ADD PTPBVC(Manda tory) BLK PTPBVC(Manda tory)
BUNDLINGF LAG Bundling Flag
BSC6900
BVCI
PTP BVC Identifier
BSC6900
Identifies a unique PTP BVC Gb Interface with NSE GBFD-119001 Function
BVCI
PTPBVC Identifier
BSC6900
The BSSGP virtual connection identifier. It is used to identify multiple BVCs that ADD multiplexes GCELLQUICKS the NSGb Interface ETUP(Optional) VC. GBFD-119001 Function Duration of BVC flow control timer F. A cell sends the flow control message at the interval SET specified BSSGPPARA(O by this Gb Interface ptional) timer. GBFD-119001 Function
BVCTF
BVC Flow Control Timer BSC6900
BWADJ
Auto adjust bandwidth switch BSC6900
Switch for adjusting the dynamical bandwidth of the logical port. If this switch is turned on, the system adjusts the dynamical bandwidth of the logical port according to the transmissi on quality of the link monitored by the IPPM. After this switch is turned on, the IPPM function must be activated ADD on the IPLOGICPORT( IPPATH of Mandatory) this logical GBFD-118605 IP QOS
Backward BWDCONGB congestion W remain bandwidth BSC6900
If the available backward bandwidth is less than or equal to this value, the backward congestion alarm is emitted and backward ADD congestion TRMLOADTH(O control is ptional) striggered. GBFD-118605 IP QOS
Backward BWDCONGC congestion clear LRBW remain bandwidth BSC6900
Backward BWDCONGC congestion clear LRTH remain ratio
BSC6900
If the available backward bandwidth is greater than this value, the backward congestion alarm is cleared and backward ADD congestion TRMLOADTH(O control is ptional) stopped. GBFD-118605 IP QOS If the ratio of available backward bandwidth is greater than this value, the backward congestion alarm is cleared and backward ADD congestion TRMLOADTH(O control is ptional) stopped. GBFD-118605 IP QOS If the ratio of available backward bandwidth is less than or equal to this value, the backward congestion alarm is emitted and backward ADD congestion TRMLOADTH(O control is ptional) triggered. GBFD-118605 IP QOS
Backward BWDCONGT congestion H remain ratio
BSC6900
Backward overload BWDOVLDC congestion clear LRRSVBW remain bandwidth BSC6900
Backward overload BWDOVLDC congestion clear LRTH remain ratio
BSC6900
If the available backward bandwidth is greater than this value, the backward overload congestion alarm is cleared and backward ADD overload TRMLOADTH(O control is ptional) stopped. GBFD-118605 IP QOS If the ratio of available backward bandwidth is greater than this value, the backward overload congestion alarm is cleared and backward ADD overload TRMLOADTH(O control is ptional) stopped. GBFD-118605 IP QOS
Backward overload BWDOVLDR congestion SVBW remain bandwidth BSC6900
If the available backward bandwidth is less than or equal to this value, the backward overload congestion alarm is emitted and backward ADD overload TRMLOADTH(O control is ptional) triggerd. GBFD-118605 IP QOS
Backward overload BWDOVLDT congestion H remain ratio
BSC6900
If the ratio of available backward bandwidth is less than or equal to this value, the backward overload congestion alarm is emitted and backward ADD overload TRMLOADTH(O control is ptional) triggered. GBFD-118605 IP QOS Ratio of reserved backward bandwidth ADD for TRMLOADTH(O handover ptional) user GBFD-118605 IP QOS Reserved backward bandwidth ADD for TRMLOADTH(O handover ptional) user GBFD-118605 IP QOS Maximum ratio of the ADD estimated IPLOGICPORT( bottleneck Optional) bandwidth GBFD-118605 IP QOS ADD RSCGRP(Mand Bandwidth atory) mode GBFD-118605 IP QOS
Backward BWDRESVH handover OTH reserved ratio
BSC6900
Backward handover BWDRSVHO reserved BW bandwidth
BSC6900
BWMAXRATI Max bandwidth O estimate ratio [%] BSC6900
BWMODE
Bandwidth Mode BSC6900
BWRTPTH
Load Control algorithm BandWidth THD[%]
BSC6900
Threshold of bandwidth change based on the load control algorithm. When the system detects that the change of the available bandwidth exceeds this threshold through the IPPM, the system starts adjusting the bandwidth ADD of the IPLOGICPORT( logical Optional) port. GBFD-118605 IP QOS
BWTHD
Up Down Balance Alarm Threshold BSC6900
Threshold for reporting the uplinkdownlink imbalance alarm. If the percentage of the uplinkdownlink imbalance measurem ent reports in the total valid measurem ent reports is equal to or greater than this Processing of threshold, Measurement the uplinkReport downlink Pre-processing SET imbalance of GTRXRLALM(O alarm is GBFD-110801 Measurement ptional) reported. GBFD-110802 Report ADD NCELL(Mandato ry) COL SYNCINFO(Man datory) Index type. The value can be BYIDX or Configuration BYNAME. MRFD-210301 Management
BYCELLTYP E Cell Index Type
BSC6900
C31HYST
GPRS Cell Reselect Hysteresis Applied to C31 Criterion
BSC6900
Whether the reselection hysteresis SET parameter GCELLRESELE is applied CTPARA(Option to the C31 al) criterion GBFD-114101 GPRS
C32QUAL
Exceptional Rule for GPRS Reselect Offset BSC6900
Whether GPRS cell reselection offset is used for C32 calculation during cell reselection . If this parameter is set to 1, then only the positive hysteresis of the SET neighoring GCELLRESELE cell is used CTPARA(Option in C32 al) calculation. GBFD-114101 GPRS Descriptive ADD information BTSCABINET(O of the BTS ptional) cabinet GBFD-111202 O&M of BTS List of all SET the cabinet BTSRACKBC(M numbers in andatory) the BTS GBFD-111202 O&M of BTS Whether the added cabinet is ADD a remote Configuration CAB(Mandatory) cabinet MRFD-210301 Management
CABINETDE Cabinet SC Description
BSC6900
CABLST
Cabinet List
BSC6900
CABT
Is remote cabinet BSC6900
Call CALLRESTA Reestablishment BDIS Forbidden BSC6900
CALVAL
Calibration Value BSC6900
Whether to allow call reestablishm ent. Burst interferenc e or blind spots due to high buildings may lead to a radio link failure. If a call drop is caused by such a failure, the MS can start call reestablishm ent to SET resume the GCELLBASICP conversati ARA(Optional) on. GBFD-110503 SET Calibration BTSCLKPARA( value of Mandatory) the clock GBFD-111202
Call Reestablishme nt
O&M of BTS
CANPC
PWRC
BSC6900
Whether an MS uses the calculated value as the final receive level value. The calculated receive level value is the measured receive level value minus the receive level value obtained from the BCCH TRX timeslots. Frequency This Hopping (RF parameter hopping, is a cell baseband option in hopping) SET system System GCELLCCCH(O messages GBFD-113701 Information ptional) 3 and 6. GBFD-111101 Sending Whether to enable the capacity and coverage of the BTS to be automatica lly optimized according to the actual situation of SET the BTSAUTOPLAN incumbent CFG(Optional) network. GBFD-510702
Capacity and CAPCOVER Coverage OPTSWITCH Optimize Switch
BSC6900
Compact BTS Automatic Capacity Planning
CARDFREAT Card Frequency TR Attribute
BSC6900
ADD Card BTSBRD(Option Frequency al) Attribute GBFD-111202 O&M of BTS Whether to indicate that the IP Path is carried on the IP logic port or resource group. NULL indicate the IP Path is carried ADD on the IPPATH(Optiona physics l) port. GBFD-118605 IP QOS ADD Bearer IPLOGICPORT( type of the Optional) logical port GBFD-118605 IP QOS Port type of the STR SBFD/ARP IPCHK(Optional) bearer None
CARRYFLAG Carry Flag
BSC6900
CARRYT
The bearing type of the logic port BSC6900
CARRYT
Carry port type
BSC6900
None
CBA
Cell Bar Access
BSC6900
Used together with "Cell Bar Qualify" to decide the priority status of a cell. Refer to GSM Rec. 04.08. Cell Bar Qualify Cell Bar Access Cell selection priority Cell reselection priority NO NO Normal Normal NO YES Prohibited Prohibited YES Basic Cell NO Selection Low GBFD-110401 Basic Cell ReNormal GBFD-110402 selection
CBCINDEX
CBC INDEX
BSC6900
Uniquely identifying a cell ADD broadcast GCBSADDR(Ma center ndatory) (CBC) GBFD-113601
CBCIP
CBC IP
BSC6900
Short Message ADD Service Cell GCBSADDR(Ma IP address Broadcast ndatory) of a CBC GBFD-113601 (TS23)
CBCITFPAR A CBC ITF Para
BSC6900
CBC interface parameter. The value of this parameter must be translated into a binary numeral. The following describe each bit of the value: Bit 0: phase flag Bit 1: message type flag Bit 2: cell list flag Bit 3: whether to carry a recovery indication Bit 4: whether to carry a cell ADD ID GCBSADDR(Op Bit 5: tional) whether to GBFD-113601 Port number at the CBC side in the communic ADD ation with GCBSADDR(Ma the ndatory) BSC6900 GBFD-113601
CBCPORT
CBC Port
BSC6900
Cb No Message CbNonMsgTi Disconnection mer Timer
BSC6900
Duration of no cell broadcast message at the Cb interface. If the BSC6900 does not receive any message from the CBC during the preset value of this parameter, the BSC6900 considers that the connection with the CBC has been broken and reestablish SET es a BSCTMR(Optio connection nal) . GBFD-113601
CBQ
Cell Bar Qualify Consent burst size [Byte]
BSC6900
CBS
BSC6900
Used together with "Cell Bar Access" to decide the priority status of a cell. See GSM Rec. 0408. This parameter does not affect cell reselection but cell selection only. Cell Bar Qualify Cell Bar Access Cell selection priority Cell reselection priority NO NO Normal Basic Cell SET Normal Selection GCELLIDLEBA NO GBFD-110401 Location SIC(Optional) YES GBFD-110301 Updating ADD Maximum IPLOGICPORT( burst size Optional) (MBS) GBFD-118605 IP QOS
CbShakeHan Cell Broadcast dTimer Handshake Timer BSC6900
Timer interval for sending handshake messages. According to the value of this parameter, the BSC6900 regularly sends the CBC a handshake message to decide whether the communic ation between the BSC6900 SET and the BSCTMR(Optio CBC is nal) normal. GBFD-113601
Filter Length for CBSIGNLEN SDCCH CV_BEP BSC6900
Number of enhanced measurem ent reports (EMRs) sampled for averaging the CV_BEP on the SDCCH. Averaging the CV_BEP in multiple EMRs helps to prevent the incompreh SET ensiveness Enhanced GCELLHOFITP of a single Measurement EN(Optional) EMR. GBFD-117501 Report(EMR)
CBTRAFFLE Filter Length for N TCH CV_BEP
BSC6900
Number of enhanced measurem ent reports (EMRs) sampled for averaging the CV_BEP on the TCH. Averaging the CV_BEP in multiple EMRs helps to prevent the incompreh SET ensiveness Enhanced GCELLHOFITP of a single Measurement EN(Optional) EMR. GBFD-117501 Report(EMR) Country code, for SET example, BSCBASIC(Opti 86 for onal) China
CC
CC
BSC6900
Certificate Chain CCAEnableS File Enabled ta State BSC6900
Whether to enable the certificate chain DISABLE: indicating that the certificate chain is disabled ENABLE: indicating that the SET certificate CERTFILE(Opti chain is Security onal) enabled MRFD-210305 Management
CCCHLOADI CCCH Load NDPRD Indication Period BSC6900
CCCHLOAD CCCH Load THRES Threshold
BSC6900
Time interval for sending overload messages, used for the BTS to notify the BSC6900 of the load over a specific CCCH Radio SET timeslot. Common GCELLCCCH(O See GSM Channel ptional) Rec. 0508. GBFD-111003 Management This parameter is used by the BTS to inform the BSC of the load on a CCCH timeslot, that is, the load of the access requests on the RACH and the load of all the messages (such as paging messages and packet immediate assignmen t messages) on the PCH. For details, see GSM Rec. Radio SET 08.58. If Common GCELLCCCH(O the load on Channel ptional) a CCCH GBFD-111003 Management DSCP correspond SET ing to the BSCPSTCDSC session PMAP(Optional) service GBFD-118603 Gb over IP
CCDSCP
DSCP of CONV[QoS]
BSC6900
CCMINTERV AL CCM Send Prid
BSC6900
Cell Directed CDRTTRYFB Retry Forbidden DTHRES Threshold
BSC6900
Transmissi on period of the ADD CCM ETHMA(Optiona packet in l) the MA GBFD-118630 Ethernet OAM Threshold of forbidding directed retry for cells. When the value of "Assignme nt Cell Load Judge Enable" in "SET GCELLCC BASIC" is ENABLE, if cells support directed retry and the current cell load is greater than or equal to the value of this parameter, the BSC allocates a SET channel to GCELLOTHEXT an MS (Optional) through the GBFD-110607 Direct Retry
CELL1800OF 1800 Reporting F Offset
BSC6900
Offset of the measurem ent report of the cells at the 1800 MHz frequency. Before cells are sequenced by priority, according to frequencie s, the value of this parameter must be added to the receive level value in the measurem ent report of the cells at the 1800 MHz frequency. GSM/WCDMA The values Interoperability SET of this GSM/TDGCELLCCUTRA parameter GBFD-114301 SCDMA NSYS(Optional) correspond GBFD-114302 Interoperability
CELL1800TH 1800 Reporting RED Threshold
BSC6900
Threshold of the measurem ent report of the cells at the 1800 MHz frequency. When the receive level value in the measurem ent report of the cells at the 1800 MHz frequency exceeds the value of this parameter, the report takes effect. After being filtered, the measurem ent report is used for GSM/WCDMA priority Interoperability SET sequencin GSM/TDGCELLCCUTRA g of cells. GBFD-114301 SCDMA NSYS(Optional) The values GBFD-114302 Interoperability
CELL2GBA1 BCCH 2G NCELL BCCH BSC6900
SET GCELL2GBA1( Mandatory)
BCCH frequency of a 2G neighbor cell that MSs can measure in idle mode. Recording the BCCH frequencie s of 2G neighbor cells that MSs can measure in idle mode, the BA1 table is sent in System Information 2, 2bis, Configuration and 2ter. MRFD-210301 Management
CELL2GBA1 TAG 2GBA1 Input Tag BSC6900
SET GCELL2GBA1( Mandatory)
Whether to generate the 2G BA1 table automatica lly according to neighbor cell relations or to input the 2G BA1 table manually. Recording the BCCH frequencie s of 2G neighbor cells that MSs can measure in idle mode, the BA1 table is sent in System Information 2, 2bis, Configuration and 2ter. MRFD-210301 Management
CELL2GBA2 BCCH 2G NCELL BCCH BSC6900
BCCH frequency of a 2G neighbor cell that MSs can measure in dedicated mode. Recording the BCCH frequencie s of 2G neighbor cells that MSs can measure in dedicated mode, the BA2 table is sent in System SET Information GCELLHO2GBA 5, 5bis, Configuration 2(Mandatory) and 5ter. MRFD-210301 Management
CELL2GBA2 TAG 2GBA2 Input Tag BSC6900
This parameter indicate whether to generate the 2G BA2 table automatica lly according to neighbor cell relations or to input the 2G BA2 table manually. Recording the BCCH frequencie s of 2G neighbor cells that MSs can measure in dedicated mode, the BA2 table is sent in System SET Information GCELLHO2GBA 5, 5bis, Configuration 2(Mandatory) and 5ter. MRFD-210301 Management
CELL8PSKP Cell 8PSK Power OWERLEVE Attenuation L Grade BSC6900
Timeslot power attenuation level of the EDGE TRX in 8PSK. The attenuation level ranges from 0 to 50, each of which correspond s to an attenuation of 0.2 dB. When the EDGE TRX sends signals in 8PSK, the transmit power must be lower than SET the mean GCELLBASICP power in ARA(Optional) GMSK. GBFD-119115 Power Control
900 Reporting CELL900OFF Offset
BSC6900
Offset applied to the receive level of a GSM900 cell in the measurem ent report before prioritizing cells by frequency bands. Before cells are sequenced by priority, according to frequencie s, the value of this parameter must be added to the receive level value in the measurem GSM/WCDMA ent report Interoperability SET of the cells GSM/TDGCELLCCUTRA at the 900 GBFD-114301 SCDMA NSYS(Optional) MHz GBFD-114302 Interoperability
CELL900TH RED
900 Reporting Threshold
BSC6900
Threshold of the measurem ent report of the cells at the 900 MHz frequency. The measurem ent report is valid only when the receive level in the measurem ent report of the GSM900 cell exceeds this threshold. After being filtered, the measurem ent report is used for prioritizing the cells. GSM/WCDMA The value Interoperability SET 7 means GSM/TDGCELLCCUTRA infinite: GBFD-114301 SCDMA NSYS(Optional) 0: 0 dB GBFD-114302 Interoperability
CELLBARAC Cell Access Bar CESS2 Switch
BSC6900
Whether the cell can be added to the reselected candidate cell list. If this parameter is set to "NoPermit" , the cell cannot be reselected as the candidate cell for handover. If this parameter is set to "Permit", the cell can be reselected as the System SET candidate Information GCELLSERVPA cell for GBFD-111101 Sending RA(Optional) handover. GBFD-114101 GPRS
CELLCOVER Cell Coverage AGETYPE Type
BSC6900
If the coverage type of a cell is outdoor coverage, the BTS detects whether the standing wave alarm is generated only when the forward power is greater than 35 dBm. If the coverage type of a cell is indoor coverage, the BTS detects whether the standing SET wave radio GCELLOTHEXT alarm is (Optional) generated GBFD-111202 O&M of BTS Even charging voltage of the battery. The battery is charged at the voltage as SET specified BTSPMUBP(Opt by this ional) parameter. GBFD-111202 O&M of BTS
CELLEQUCH Even Charging GVOL Voltage
BSC6900
CELLEQUCH Even Charging GVOL Voltage
BSC6900
Even charging voltage of the battery. The battery is charged at the voltage as specified by this parameter. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS Float charging voltage of the battery. The battery is charged at the voltage as SET specified BTSPMUBP(Opt by this ional) parameter. GBFD-111202 O&M of BTS
CELLFLOAT Float Charging CHGVOL Voltage
BSC6900
CELLFLOAT Float Charging CHGVOL Voltage
BSC6900
Float charging voltage of the battery. The battery is charged at the voltage as specified by this parameter. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS
CELLID
Cell Index
BSC6900
ADD GCELLFREQ(M andatory) ADD GCELLMAGRP( Mandatory) ADD GCELLOSPMA P(Mandatory) SET GCELLAMRQU L(Mandatory) SET GCELLBASICP ARA(Mandatory) SET GCELLCCAD(M andatory) SET GCELLCCTMR( Mandatory) SET GCELLCCUTRA NSYS(Mandator y) SET GCELLEXTMSR PARA(Mandator y) SET GCELLGSMR(M andatory) SET GCELLIDLEBA
Index of a cell, uniquely identifying a cell in a Configuration BSC6900 MRFD-210301 Management
CELLID
Cell Index
BSC6900
ID of the cell. The cell ID cannot conflict SET with other GMRSCOPE(M cell IDs in andatory) the BSC.
CELLID
Cell Index
BSC6900
Index of a cell, SET uniquely GCELLHOINTE identifying RRATLDB(Man a cell in a MBSC Load datory) BSC MRFD-211402 Balancing Index of a cell, uniquely ADD identifying BTSRETANT(M a cell in a Configuration andatory) BSC6900 MRFD-210301 Management
CELLID
Cell Index
BSC6900
CELLID
Cell Index
BSC6900
CELLID
Cell Index
BSC6900
Index of a cell, uniquely ADD identifying BTSAUTOPLAN a cell in a Configuration (Optional) BSC6900 MRFD-210301 Management SAV GCELLTEMPLA TE(Mandatory) Cell Index GBFD-111202 O&M of BTS List of the userdefined neighbor cells to be measured. This parameter is represente d as a character string where the IDs of the cells to be measured are separated by &, such as 1&2&5. The BSC supports STR up to 50 NCS(Mandatory) cells. GBFD-510901 Index type of a cell when this SET command FHO(Mandatory) is executed MRFD-210301 ADD BTSRETANT(M Index type andatory) of the cell MRFD-210301
CELLIDLST
Cell List
BSC6900
2G/3G Neighboring Cell Automatic Optimization
CELLIDTYPE Cell Index Type
BSC6900
Configuration Management Configuration Management
BSC6900
BSC6900
Index type of the cell. BYNAME: query by cell name; SET BYID: BTSANTANGLE query by Remote (Mandatory) cell index. MRFD-210602 Electrical Tilt
Cell Inner/Extra CELLINEXTP Property
BSC6900
This parameter specifies whether a cell is the OL subcell or the UL subcell. This parameter is applied to the ADD enhanced GCELL(Mandato dualband Enhanced Dualry) cell. GBFD-114402 Band Network Layer of the cell. If the layer of the cell is lower, it is more likely that a handover HUAWEI I ADD to the cell Handover GEXT3GCELL( will be GBFD-110601 HUAWEI II Optional) triggered. GBFD-510501 Handover List of cell indexes. All cell indexes are combined as a character string, separated ADD by "&". For GSMSCB(Optio example, Configuration nal) 1&2&5. MRFD-210301 Management
CELLLAYER Layer of the cell
BSC6900
CELLLIST
Cell Index List
BSC6900
CellListOptio Cell List Send nSend Flag in ASS CMP BSC6900
Whether an assignmen t complete message contains a cell list. According to GSM Rec. 08.08, during a channel assignmen t, an assignmen t complete message contains a cell list only when the cell of the MS changes. For the MSCs of some vendors, however, assignmen t complete SET messages A Interface MSGSOFTPAR must Protocol A(Optional) contain cell GBFD-111804 Process
Cell SDCCH Channel CELLMAXSD Maximum
BSC6900
Maximum number of SDCCHs in the cell. Before converting a TCH into an SDCCH, the BSC compares the number of SDCCHs after the conversion in the cell with "Cell SDCCH Channel Maximum". If the number of SDCCHs after the conversion in the cell exceeds this parameter, the BSC SET does not SDCCH GCELLCHMGB convert the Dynamic ASIC(Optional) TCH into GBFD-113001 Adjustment
CELLNAME
Cell Name
BSC6900
ADD GCELLFREQ(M andatory) ADD GCELLMAGRP( Mandatory) ADD GCELLOSPMA P(Mandatory) SET GCELLAMRQU L(Mandatory) SET GCELLBASICP ARA(Mandatory) SET GCELLCCAD(M andatory) SET GCELLCCTMR( Mandatory) SET GCELLCCUTRA NSYS(Mandator y) SET GCELLEXTMSR PARA(Mandator y) SET GCELLGSMR(M andatory) SET GCELLIDLEBA
Name of a cell, uniquely identifying a cell in a Configuration BSC6900 MRFD-210301 Management
CELLNAME
Cell Name
BSC6900
Name of a cell, SET uniquely GCELLHOINTE identifying RRATLDB(Man a cell in a MBSC Load datory) BSC MRFD-211402 Balancing ADD BTSAUTOPLAN (Mandatory) SAV GCELLTEMPLA TE(Mandatory) Name of a cell, uniquely identifying a cell in a BSC6900 GBFD-111202 O&M of BTS
CELLNAME
Cell Name
BSC6900
List of cell names. All cell names are combined as a character string, separated by "&". For example, cell1&cell2 &cell5. The cell name should not contain the following characters: ?|:<>" ADD @#!%^ GSMSCB(Optio & * . [ ] / \ \\ Configuration nal) ' MRFD-210301 Management Power of each passage on the MRRU in the cell. When multiple operators are configured on an MRRU, the parameter specifies the power of each SET operator GCELLCHMGA on the D(Optional) MRRU. GBFD-118701 RAN Sharing
CELLNAMEL IST Cell Name List
BSC6900
CELLOPPW Cell Operator RGRP Power Group
BSC6900
CELLOVERC Cell Over VGRXLEVDL Coverage DL TH RxLev Threshold BSC6900
Threshold of the downlink receive level of an overcoverage cell. If the downlink level of a cell is higher than the value of this parameter and the timing advance (TA) is greater than the value of "Cell Over Coverage TA Threshold" in more than 20% Processing of measurem Measurement ent reports, Report the cell is Pre-processing SET defined as of GCELLOTHEXT an overGBFD-110801 Measurement (Optional) coverage GBFD-110802 Report
Cell Over CELLOVERC Coverage TA VGTALTH Threshold
BSC6900
Threshold of the TA of an overcoverage cell. If the downlink level of a cell is higher than the value of this parameter and the timing advance (TA) is greater than the value of "Cell Over Coverage TA Threshold" in more than 20% measurem Processing of ent reports, Measurement the cell is Report defined as Pre-processing SET an overof GCELLOTHEXT coverage GBFD-110801 Measurement (Optional) cell. GBFD-110802 Report
CELLPAGIN Cell Paging GOVERLOA Overload DCOUNTER Threshold
BSC6900
Maximum number of reported paging overload messages in the cell. If the BSC allows the flow control on the repaging messages, and the number of the reported paging overload messages exceeds the value of this parameter, the BSC determines that the cell is in SET PCH GCELLSOFT(O overload ptional) state. GBFD-111003
Radio Common Channel Management
CELLPWRO Battery Power-off FFEN Allowed State BSC6900
Whether to allow the power-off of the battery. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS
CELLPWRO Battery Power-off FFVOL Voltage BSC6900
Battery power-off voltage. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS This parameter specifies whether a 2G cell or 3G cell is selected in the interSET RAT cell GCELLNC2PAR reselection A(Optional) procedure. GBFD-116201
2G/3G Cell CELLRESEL Reselection STRATEGY Strategy
BSC6900
NetworkControlled Cell Reselection (NC2)
CELLRXQUA Cell Rx Quality LWORSENR Worsen Ratio ATIOTHRSH Threshold
BSC6900
The number of times that the downlink transmissi on quality of the MS is lower than the transmissi on quality threshold of the MS ("EDGE GMSK Quality Threshold" , "EDGE 8PSK Quality Threshold" , or "GPRS Quality Threshold" by TBF type) is calculated accumulati vely. When the rate of SET the GCELLNC2PAR accumulat A(Optional) ed value to GBFD-116201
CELLSCENA RIO Cell Scenario
BSC6900
Information about the cell scenario. It needs to be sent to the BTS. Based on the information , the BTS optimizes the Uplink SET allocation EGPRS2-A GCELLBASICP of GBFD-510803 Downlink ARA(Optional) resources. GBFD-510804 EGPRS2-A
CELLSELEC Select 3G Cell TAFTERCAL After Call LREL Release
BSC6900
This parameter specifies whether to allow a mobile phone to preferential ly camp on a 3G cell after a call is terminated in the areas covered by both the GSM network SET and the GCELLCCAD(O UMTS ptional) network. GBFD-114325
Fast 3G Reselection at 2G CS Call Release
High Temp Alarm CELLTEMP1 Assembled ALARMH Battery1 BSC6900
The BTS reports an alarm if the temperatur e of battery group 1 exceeds the value of this parameter. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another Faulty ptional) mode. MRFD-210304 Management
Low Temp Alarm CELLTEMP1 Assembled ALARML Battery1 BSC6900
The BTS reports an alarm if the temperatur e of battery group 1 is lower than the value of this parameter. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another Faulty ptional) mode. MRFD-210304 Management
CELLTEMP1 THRESHOL Upper Assembled DH Battery 1 Temp BSC6900
Upper limit of the temperatur e measured by the temperatur e sensor of the battery group 1. If the measured value is greater than the value of this parameter, the value of this parameter is reported. In multimode scenario, the value of this parameter SET in one BTSAPMUBP(O mode must ptional) be the SET same as BTSDPMUBP(O the value ptional) of the GBFD-111202 O&M of BTS
CELLTEMP1 Lower Assembled THRESHOL Battery1 TEMP DL Measure BSC6900
Lower limit of the temperatur e measured by the temperatur e sensor of the battery group 1. If the measured value is smaller than the value of this parameter, the value of this parameter is reported. In multimode scenario, the value of this parameter SET in one BTSAPMUBP(O mode must ptional) be the SET same as BTSDPMUBP(O the value ptional) of the GBFD-111202 O&M of BTS
Battery Temperature CELLTEMPC Compensated OMPENABL Configure ED Enabled
BSC6900
Whether to allow the configurati on of parameters related to the temperatur e compensat ion of the battery group In multimode scenario, the value of this parameter in one mode must be the same as the value SET of the BTSAPMUBP(O correspond ptional) ing SET parameter BTSDPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS
CELLWEAK CVGRXLEV DLTH
Cell Weak Coverage DL RxLev Threshold BSC6900
Threshold of the downlink receive level of an weakcoverage cell. If the downlink level of a cell is lower than the value of this parameter and the timing advance (TA) is smaller than the value of "Cell Weak Coverage TA Threshold" in more than 30% Processing of measurem Measurement ent reports, Report the cell is Pre-processing SET defined as of GCELLOTHEXT an weak- GBFD-110801 Measurement (Optional) coverage GBFD-110802 Report
CELLWEAK CVGTALTH
Cell Weak Coverage TA Threshold
BSC6900
Threshold of the TA of an weakcoverage cell. If the downlink level of a cell is lower than the value of this parameter and the timing advance (TA) is smaller than the value of "Cell Weak Coverage TA Threshold" in more than 30% measurem ent reports, the cell is defined as SET an weakGCELLOTHEXT coverage GBFD-110801 (Optional) cell. GBFD-110802
Processing of Measurement Report Pre-processing of Measurement Report
CENDTHD
Congestion End Threshold
BSC6900
Threshold for stopping LAPD link congestion control. This parameter cannot be set too small. If this parameter is set too small, the congestion control duration is too long, and thus the transmissi on capability of signaling links cannot be fully used. The difference SET between GTRXFC(Option the GSM Flow al) congestion GBFD-111705 Control Name of SET the CERTFILE(Man certificate datory) chain file
CertChain
Certificate Chain File Name BSC6900
Security MRFD-210305 Management
CFGFLAG
Board Parameter Configuration Enabled BSC6900
SET BTSFMUABP(M andatory) SET BTSNFCBBP(M andatory) SET BTSPMUBP(Ma ndatory) SET BTSAPMUBP(M andatory) SET BTSDATUBP(M andatory) SET BTSDEMUBP(M andatory) SET BTSDHEUBP(M andatory) SET BTSDOMUBP( Mandatory) SET BTSDPMUBP(M andatory) SET BTSDTMUBP(M andatory) SET BTSPSUFP(Ma ndatory) SET
Whether to allow the configurati on of alarm parameters . The value "YES" indicates that the configurati on is allowed, and the value "NO" indicates that the configurati on is not allowed. If the parameter is set to "YES", all the other parameters are reset to the default values in this command. In multimode scenario, the value GBFD-111202 O&M of BTS
CFGFLAG
Carry Flag
BSC6900
Indicates whether the IP path is carried on the IP logic port or the SET resource BTSIP(Optional) group. GBFD-118605 IP QOS
CFGMODE
BTS Configuration Mode
BSC6900
BTS configurati on modes include auto plan mode and normal mode. In auto plan mode, the user can enable the auto planning algorithms and auto optimizatio n algorithms according to the BTS type. In normal mode, the auto planning algorithms and auto optimizatio n SET algorithms BTSAUTOPLAN are CFG(Mandatory) disabled. GBFD-510701 IMP BTSIPPARA(Ma ndatory) IMP BTSVLAN(Mand atory) IMP BTSDEVIP(Man datory) IMP BTSPPPLNK(M andatory) IMP BTSMPGRP(Ma ndatory) IMP BTSMPLNK(Ma ndatory) IMP BTSIPRT(Mand Configure atory) switch.
CFGSW
Configure switch
BSC6900
GBFD-111202 O&M of BTS
CFLAG
Whether to enable the board parameters to be configured. If this parameter is set to "YES", the user can set board parameters of the BTS cabinet. Otherwise, the user cannot set SET the board BTSCABPARA( parameters Mandatory) . GBFD-111202 O&M of BTS Whether to enable the board parameters to be configured. If this parameter is set to "YES", the user can set the cabinet power type. Otherwise, the user cannot set SET the cabinet BTSPOWERTY power PE(Mandatory) type. GBFD-111202 O&M of BTS Confirm password. The confirm password is required to ensure that a correct O&M of BSC password GBFD-111203 Security is entered. MRFD-210305 Management
CFLAG
CFM
Confirm Password
BSC6900
ADD OP(Mandatory)
CG
Command Group BSC6900
ADD CCG(Mandatory ) SET CCGN(Mandator y)
Customize d command O&M of BSC group to be GBFD-111203 Security processed MRFD-210305 Management
CG
Command Group BSC6900
ADD OP(Optional)
This parameter is valid only when the operator belongs to O&M of BSC the custom GBFD-111203 Security level. MRFD-210305 Management
CGET
BSC6900
Congestio n end threshold. If the congestion end threshold is large, the congestion control ends earlier. As a result, the congestion control effect is poor. The ADD work of the ATERSL(Option Ater al) signaling ADD link is ATERCONSL(O deteriorate ptional) d. GBFD-111203 O&M of BSC
CGET
BSC6900
Congestio n end threshold. If the congestion end threshold is large, the congestion control ends earlier. As a result, the congestion control effect is poor. The work status of the Ater signaling link is ADD deteriorate PBSL(Optional) d. GBFD-111203 O&M of BSC
CGIRACSWI CGI and RAC TCH Plan Switch
BSC6900
If the parameter is set to 1, it indicates that the CGI and RAC data is generated through automatic planning. If the parameter is set to 0, it indicates that the data needs SET to be BTSAUTOPLAN manually CFG(Optional) entered. GBFD-510601
PICO Automatic Configuration and Planning
CGN
Command Group Name BSC6900
Name of the command group. You O&M of BSC SET can define GBFD-111203 Security CCGN(Optional) the name. MRFD-210305 Management Number of the cabinet group where the SET idle BTSIDLETS(Ma timeslot is ndatory) located. GBFD-114101 GPRS
CGN
Cabinet Group No.
BSC6900
CGST
Congestion Start Threshold BSC6900
Congestio n start threshold. If congestion start threshold is set to a large value, there will be a time lag in the congestion control and the work of the signaling link gets deteriorate d. The interval between congestion start threshold and congestion end threshold should not ADD be too ATERSL(Option small. al) Otherwise, GBFD-111203 O&M of BSC
CGST
Congestio n start threshold. If congestion start threshold is set to a large value, there will be a time lag in the congestion control and the work of the signaling link gets deteriorate d. The interval between congestion start threshold and congestion end threshold should not ADD be too ATERCONSL(O small. ptional) Otherwise, GBFD-111203 O&M of BSC
CGST
Congestio n start threshold. If congestion start threshold is set to a large value, there will be a time lag in the congestion control and, the work of the signaling link gets deteriorate d. The interval between congestion start threshold and congestion end threshold should not be too ADD small. PBSL(Optional) Otherwise, GBFD-111203 O&M of BSC This parameter indicates the geographic al relationshi p between the neighborin g cell and the serving cell. In the BSC6900, if direction A is selected, then the ADD reverse G2GNCELL(Opti direction is Chain Cell onal) B. GBFD-510103 Handover
CHAINNCEL Chain Neighbour LTYPE Cell Type BSC6900
CHAINTORI NG
Combine Type
BSC6900
CHALLOCST Channel Allocate RATEGY Strategy BSC6900
Combinati on type of chains. "CHAINTO RING" indicates that one chain changes to a ring, and "COMBINE CHAINS" indicates that two chains are CBN combined BTSRXUCHAIN into one (Mandatory) ring. GBFD-111202 O&M of BTS Channel assignmen t priority of the cell If this parameter is set to CAPABILI TY, the factors are listed as follows in a descendin g order of priority: capacity factors, quality factors, PS cooperatio n factors, and manageme nt factors. If this parameter is set to QUALITY, the factors are listed as follows Enhanced SET in a Channel GCELLCHMGB descendin Assignment ASIC(Optional) g order of GBFD-111005 Algorithm
CHANFAULT PDCH Available ALMPDCHT Threshold of H Channel Failure
BSC6900
This parameter specifies the proportion of available PDCHs in a cell. When the proportion of available PDCHs in the cell is lower than this threshold, the BSC generates an alarm. When the proportion of available PDCHs in the cell is higher than or equal to this threshold, SET the BSC GCELLSOFT(O generates ptional) a recovery None
None
Monitoring Alarm CHANFAULT Switch for ALMSWITCH Channel Failure BSC6900
This parameter determines whether to activate the function of monitoring the failure of logical channels in a cell. When this function is activated and the proportion of faulty logical channels in the cell exceeds a predefined threshold, SET the BSC GCELLSOFT(O generates ptional) an alarm. GBFD-111203 O&M of BSC
TCH Available CHANFAULT Threshold of ALMTCHTH Channel Failure
BSC6900
This parameter specifies the proportion of available TCHs in a cell. When the proportion of available TCHs in the cell is lower than this threshold, the BSC generates an alarm. When the proportion of available TCHs in the cell is higher than or equal to this threshold, SET the BSC GCELLSOFT(O generates ptional) a recovery GBFD-111203 O&M of BSC
CHANID
Chan ID
BSC6900
Channel number of a simple cell broadcast message. This is a key parameter for adding a simple cell broadcast message. You can use "DSP SET GSMSCB" GCELLSBC(Opt to query ional) and obtain ADD the value GSMSCB(Mand of this Simplified Cell atory) parameter. GBFD-113602 Broadcast
CHANINTER Active CH Interf. MESALLOW Meas.Allowed
BSC6900
Whether to measure the channel interferenc e during channel assignmen t. If this parameter is set to NO, the BSC does not measure the channel interferenc e or send an interferenc e indication during channel assignmen t. If this parameter is set to YES, the BSC SET measures GCELLCHMGA the D(Optional) channel GBFD-111005
CHANNELR ATECODE
Channel Rate Type Decode Expand
BSC6900
When the value of this parameter is YES, if the assignmen t request message sent by the MSC contains the channel rate type indicating the support of both full and half rates, and contains the speech version indicating the selection of full rate speech version only or half rate SET speech A Interface AITFOTHPARA( version Protocol Optional) only, the GBFD-111804 Process
PDCH Out-ofCHANPDOU Synchronization TTIME Period
BSC6900
This parameter is used to check whether the Abis timeslot for the PDCH is faulty. When the out-ofsynchroniz ation period of the PDCH primary link exceeds the value of this parameter, the Abis timeslot for SET the PDCH GCELLSOFT(O is regarded ptional) as faulty. None
None
CHECKCOU Ping Check NT Timeout Counts
BSC6900
Number of ping check timeouts. The parameter indicates the number ADD of timeout IPPATH(Optiona record l) failures. GBFD-118605 IP QOS
Auto Check of CheckingBTS BTS Connection Connection Port
BSC6900
Whether to enable the BSC to check automatica lly whether a BTS is connected to a proper E1 port in the EIUa. If a BTS is connected to an E1 port configured for another BTS in the EIUa, the BTS cannot be reset automatica lly after the BTS is initialized. Thus, the data configurati ons on the BTS side differ from the data configurati MRFD-210206 Tree Topology
ChkModA
ANT_A ALD Current Detection Mode BSC6900
Alarm mode of the ANT_A tributary of an RXU board. There are three alarm modes. Alarm mode 1 has only one type of alarms. The alarm current is fixed and greater than the normal working current. Alarm mode 2 has two types of alarms: warning alarms and O&M of BTS critical Connection alarms. with TMA SET The alarm (Tower BTSRXUBP(Opt current is GBFD-111202 Mounted ional) fixed and MRFD-210601 Amplifier)
ChkModB
ANT_B ALD Current Detection Mode BSC6900
Alarm mode of the ANT_B tributary of an RXU board. There are three alarm modes. Alarm mode 1 has only one type of alarms. The alarm current is fixed and greater than the normal working current. Alarm mode 2 has two types of alarms: warning alarms and O&M of BTS critical Connection alarms. with TMA SET The alarm (Tower BTSRXUBP(Opt current is GBFD-111202 Mounted ional) fixed and MRFD-210601 Amplifier) Detection index. The index is a unique value ranging from 0 to 511 if it is STR not IPCHK(Optional) specified. GBFD-118609 ADD IPPATHBIND(M Detection andatory) index GBFD-118609
CHKN
Check Index
BSC6900
CHKN
Check Index
BSC6900
IP Fault Detection Based on BFD IP Fault Detection Based on BFD
CHKOFFTIM Check Times for ES Off
BSC6900
Total number of times that the BTS checks whether to SET switch off BTSAIRCON(O the air ptional) conditioner GBFD-111202 O&M of BTS Total number of times that the BTS checks whether to SET switch on BTSAIRCON(O the air ptional) conditioner GBFD-111202 O&M of BTS
CHKONTIME Check Times for S On
BSC6900
Calculate checksum when CHKSUMRX receive message BSC6900
Whether to perform checksum ADD when SCTPLNK(Optio receiving nal) message GBFD-118602 A over IP
Calculate checksum when CHKSUMTX send message
BSC6900
Whether to perform checksum ADD when SCTPLNK(Optio sending nal) message GBFD-118602 A over IP
CHKSUMTY Checksum PE arithmetic
BSC6900
Checksum arithmetic type. According to the RFC4960, the ALDER32 algorithm is not applicable to the SCTP checksum. The ADD CRC32 is SCTPLNK(Optio recommen nal) ded. GBFD-118602 A over IP Type of the detection that is performed between STR the BSC IPCHK(Mandato and the ry) gateway. GBFD-118609 STR BTSTST(Manda tory) Duration GBFD-111207
CHKTYPE CHLDURAT H
Check type
BSC6900
IP Fault Detection Based on BFD BTS Test Function
Duration<hour>
BSC6900
CHNNO
Channel No.
BSC6900
CHNNO
Channel No.
BSC6900
SET BTSCHNFALLB ACK(Mandatory) SET TCPLYVOICE(M andatory)
Number of the channel in Configuration the TRX MRFD-210301 Management Timeslot for playing sound GBFD-111203 O&M of BSC
CHNO
Channel No.
BSC6900
SET FHO(Mandatory) SET GTRXCHANHO P(Mandatory) SET GTRXCHAN(Ma ndatory) SET GTRXCHANAD MSTAT(Mandat ory) STR BTSTST(Manda tory)
Number of the channel in Configuration the TRX MRFD-210301 Management
CHNTSTTYP Channel Test E Type
BSC6900
Type of STR channel BTSTST(Manda loopback tory) test
BTS Test GBFD-111207 Function
CHNTYPE
Channel Type
BSC6900
Channel type of the timeslot on the TRX. The channel type of timeslot 0 must not be set, because the combined BCCH is configured by default. The channel type of other timeslots can be set to full-rate SET TCH or BTSCHNFALLB half-rate Configuration ACK(Mandatory) TCH. MRFD-210301 Management
ChosenChIn ChosenCh Send AssCmp Flag in ASS CMP BSC6900
Whether an assignmen t complete message contains the information SET element of A Interface MSGSOFTPAR Chosen Protocol A(Optional) Channel GBFD-111804 Process
ChosenCh Send ChosenChIn Flag in HO HoPerform Perform
BSC6900
Whether a handover perform message contains the information SET element of A Interface MSGSOFTPAR Chosen Protocol A(Optional) Channel GBFD-111804 Process
ChosenCh Send ChosenChIn Flag in HO REQ HoReqAck ACK
BSC6900
Whether an HO REQ ACK message contains the information SET element of A Interface MSGSOFTPAR Chosen Protocol A(Optional) Channel GBFD-111804 Process
ChosenEncry ChosenEncrypAlg pAlgInCiphC Send Flag in mp Cipher CMP BSC6900
Whether an encryption complete message contains the information element of SET Chosen A Interface MSGSOFTPAR Encryption Protocol A(Optional) Algorithm GBFD-111804 Process
ChosenEncry ChosenEncrypAlg pAlgInHoPerf Send Flag in HO orm Perform BSC6900
Whether a handover performed message contains the information element of SET Chosen A Interface MSGSOFTPAR Encryption Protocol A(Optional) Algorithm GBFD-111804 Process
ChosenEncry ChosenEncrypAlg pAloInAssCm Send Flag in ASS p CMP BSC6900
Whether an assignmen t complete message contains the information element of SET Chosen A Interface MSGSOFTPAR Encryption Protocol A(Optional) Algorithm GBFD-111804 Process
ChosenEncry ChosenEncrypAlg pAloInHoReq Send Flag in HO Ack REQ ACK BSC6900
Whether an HO REQ ACK message contains the information element of SET Chosen A Interface MSGSOFTPAR Encryption Protocol A(Optional) Algorithm GBFD-111804 Process
CHPWRINS Channel Assign UFFALLOWE Allow for Insuff D Power
BSC6900
Whether to allow a multidensity TRX board, that uses the dynamic power sharing algorithm to assign channels, to assign a channel to an MS when the remaining power on the multidensity TRX board is less than the power required by the MS. If this parameter is set to YES, a multiSET density GCELLCHMGA TRX board D(Optional) that uses GBFD-111005 This parameter indicates whether to collect CHR logs SET for a GPSCHRSCOP specified E(Optional) object. None
CHRCOLLE CTSWITCH
PS CHR Collect Switch
BSC6900
None
CHREQCSM Max CS CHAN AXMSGNUMI REQ Num in NPERIOD Period
BSC6900
Maximum number of allowable CS domain channel request messages within the value of "CHAN SET REQ BSCFCPARA(O Statistical GSM Flow ptional) Period" GBFD-111705 Control Average number of allowable PS domain channel request messages within the value of "CHAN SET REQ BSCFCPARA(O Statistical GSM Flow ptional) Period" GBFD-111705 Control
CHREQPSA VGMSGNUM Average PS INPERIOD CHAN REQ Num BSC6900
CHREQSTA CHAN REQ TPERIOD Statistical Period BSC6900
Statistic period of the arrival rate of channel request messages. Within the preset value of this parameter, the BSC6900 counts the number of channel request messages. Once the current total number of times exceeds the value of the allowable number of channel request SET messages BSCFCPARA(O of CPU0 GSM Flow ptional) within the GBFD-111705 Control
Type and function of the channel Combined BCCH+7T CH Main BCCH+SD CCH/8+6T CH Main BCCH+2S DCCH/8+5 TCH Main BCCH+SD CCH/8+ext ended BCCH (BCH)+5T CH Main BCCH+SD CCH/8+ext ended SET BCCH GTRXCHAN(Op (BCH)+TC Configuration tional) H+extende MRFD-210301 Management
CHTYPE
Channel Type
BSC6900
CI
Cell CI
BSC6900
ADD GCELL(Mandato ry) ADD GEXT2GCELL( Mandatory) ADD GEXT3GCELL( Mandatory) SET FHO(Mandatory) ADD BTSAUTOPLAN (Mandatory) SET BTSAUTOPLAN CFG(Optional) ADD GCELLQUICKS ETUP(Mandator y)
Identity code of a cell, A cell is a wireless coverage area identified by a base station identity code and a global cell identificatio n. Can be input in hexadecim al format. The hexadecim al format is H'****, for example, Configuration H'1214. MRFD-210301 Management
CI1
Cell CI
BSC6900
Cell identity code. The cell is a radio coverage area that is identified by the BTS identity code and SET global cell BTSAUTOPLAN identity Configuration CFG(Optional) code. MRFD-210301 Management
CIC
CIC
BSC6900
Indicates the A interface CIC. When operation mode is set to OPC index, DPC group index, BSC ID, or CIC, the parameter is mandatory. The parameter BLK supports A Interface ACIC(Mandatory multiple Circuit ) values. GBFD-111803 Management Indicates the Pb interface CIC. If the search object mode is set to search by the specified No., the parameter is mandatory. The parameter BLK supports PBCIC(Mandato multiple ry) values. GBFD-111203 O&M of BSC
CIC
CIC
BSC6900
Number of Different Frames CicDMuteDif in CIC One-Way Cnt Mute Detection BSC6900
The TC DSP compares neighborin g speech frame samples after the CIC downlink one-way mute detection is enabled. When the number of times with different results exceeds the value of this parameter, it is regarded that no oneway mute event occurs for the current call. SET Otherwise, BSCBASIC(Opti it is Voice Fault onal) regarded GBFD-119301 Diagnosis This parameter indicates the period of completing a CIC downlink one-way mute SET detection BSCBASIC(Opti of each Voice Fault onal) port. GBFD-119301 Diagnosis
CIC Downlink CicDMutePer One-Way Mute iod Detection Period
BSC6900
CIC Downlink CicDMuteSwi One-Way Mute tch Detection Switch BSC6900
This parameter determines whether the CIC downlink one-way SET mute BSCBASIC(Opti detection Voice Fault onal) is enabled. GBFD-119301 Diagnosis This parameter indicates the proportion of one-way mute CICs in all SET available BSCBASIC(Opti CICs over Voice Fault onal) a port. GBFD-119301 Diagnosis If one-way mute frames occur for the duration greater than "CIC Downlink One-Way Mute Detection Duration", then it is regarded that a oneway mute event SET occurs for BSCBASIC(Opti the current Voice Fault onal) call. GBFD-119301 Diagnosis
CIC Downlink One-Way Mute CicDMuteThr Detection e Threshold
BSC6900
CIC Downlink One-Way Mute CicDMuteTim Detection e Duration
BSC6900
CicPoolInAss CIC Pool Send Fail Flag in ASS Fail
BSC6900
Whether an assignmen t failure message contains the information SET element of A Interface MSGSOFTPAR Circuit Protocol A(Optional) Pool GBFD-111804 Process
CicPoolInHo CIC Pool Send Fail Flag in HO Fail
BSC6900
Whether an HO FAIL message contains the the information SET element of A Interface MSGSOFTPAR Circuit Protocol A(Optional) Pool GBFD-111804 Process
CIC Pool List CicPoolListIn Send Flag in ASS AssFail Fail BSC6900
Whether an assignmen t failure message contains the the information SET element of A Interface MSGSOFTPAR Circuit Protocol A(Optional) Pool List GBFD-111804 Process
CIC Pool List CicPoolListIn Send Flag in HO HoFail Fail
BSC6900
Whether an HO FAIL message contains the the information SET element of A Interface MSGSOFTPAR Circuit Protocol A(Optional) Pool List GBFD-111804 Process
CicPoolSend FlagInAssCm CIC Pool Send p Flag in ASS CMP BSC6900
Whether an assignmen t complete message contains the information SET element of A Interface MSGSOFTPAR Circuit Protocol A(Optional) Pool GBFD-111804 Process
CIC Pool Send CicPoolSend Flag in HO REQ FlagInHoAck ACK Bandwidth [64kbps]
BSC6900
CIR
BSC6900
Whether an HO REQ ACK message contains the information SET element of A Interface MSGSOFTPAR Circuit Protocol A(Optional) Pool GBFD-111804 Process ADD Bandwidth IPLOGICPORT( of the Optional) logical port GBFD-118605 IP QOS
CIRESTVAL C/I Estimate UE Value
BSC6900
This parameter specifies the estimated carrier-tointerferenc e ratio of a new call. It is used for the Huawei power control algorithm III to SET calculate GCELLCHMGA the power D(Optional) of the call. GBFD-111005
CIUSLOTNO Slot No.
BSC6900
Slot number of the BSC6900 board that is ADD connected DXXCONNECT( s to the Mandatory) BTS GBFD-111202 O&M of BTS Subrack number of the BSC6900 board that ADD is DXXCONNECT( connected Mandatory) to the DXX GBFD-111202 O&M of BTS Whether the cell supports the MS with the DTM multiSET timeslot GCELLGPRS(O capability ptional) of class 11 GBFD-119403 Class11 DTM
CIUSUBRAC KNO Subrack No.
BSC6900
CLASS11DT Support Class11 M DTM
BSC6900
CLASSMAR KQUERY
Classmark Enquiry With 3G Request
BSC6900
Whether to enable the BSC to include the 3G classmark information element in the Classmark Request message that the BSC forwards from the MSC to an MS GBFD-110501 Call Control
CLEARTHD
Error clear threshold
BSC6900
Abis IP over ADD E1/T1 MPGRP(Optiona Error clear GBFD-118611 A IP over l) threshold. GBFD-118622 E1/T1
CLKMOD
Clock Mode
BSC6900
SET BTSCLKPARA( Clock Mandatory) mode
CLKPRTTYP Clock Protocol E Type
BSC6900
Type of the clock protocol for SET the IP BTSIPCLKPAR clock A(Optional) server GBFD-111202 O&M of BTS
CLKTYPE
Clock board type BSC6900
SET Type of the CLKTYPE(Mand clock BSC/RNC atory) board MRFD-210502 Clock
ClkType
Clock Type
BSC6900
Clock mode of the BTS. If this parameter is set to INT_CLK, the BTS does not track any external clock. The internal high precision clock works in free-run mode. If this parameter is set to TRCBSC_ CLK, the BTS tracks the clock signals received from the BSC. If this SET parameter BTSCLK(Manda is set to BTS/NodeB tory) EXCLK, MRFD-210501 Clock Delay for which the BTS waits to run the burglar alarm clearance command after SET reporting BTSTHEFTALM the burglar (Optional) alarm GBFD-111202 O&M of BTS
ClrDelay
Clear Command Delay Time
BSC6900
CLRFLG
Alarm Cleared Flag
BSC6900
Whether the alarm to be queried is cleared. You can select "cleared" or "uncleared EXP ", or both ALMLOG(Option of them. al) By default, STA both of ALMLOG(Option them are Faulty al) selected. MRFD-210304 Management Interval at which the BTS runs the burglar alarm clearance SET command BTSTHEFTALM automatica (Optional) lly GBFD-111202 O&M of BTS Name of the command to be queried. You can select one or more O&M of BSC commands GBFD-111203 Security . MRFD-210305 Management
ClrInterval
Clear Command Time Interval
BSC6900
CMD
Command Name BSC6900
EXP LOG(Optional)
CMD
Command Name BSC6900
You can select one ADD or more O&M of BSC CCG(Mandatory commands GBFD-111203 Security ) . MRFD-210305 Management Sequence number of the command string of ADD the SUBCMD(Mand scheduled atory) subtask. GBFD-111203 O&M of BSC
CMDSEQ
Command Sequence
BSC6900
CN
Cabinet No.
BSC6900
ADD Number of Configuration CAB(Mandatory) the cabinet MRFD-210301 Management
CN
Cabinet No.
BSC6900
ADD TRXBIND2PHY BRD(Optional) SWP BTSRING(Optio nal) SWP BTSOMLLINK(O ptional) SET BTSFMUABP(O ptional) SET BTSAPMUBP(O ptional) SET BTSDATUBP(O ptional) SET BTSDEMUBP(O ptional) SET BTSDHEUBP(O ptional) SET BTSUSCUBP(O ptional) SET BTSCABPARA( Mandatory) SET BTSPOWERTY PE(Mandatory) Number of SET the cabinet GBFD-111202 O&M of BTS ADD BTSBFD(Option al) ADD IP Fault BTSIPRTBIND( Number of Detection Optional) the cabinet GBFD-118609 Based on BFD
CN
Cabinet No.
BSC6900
CN
Port Cabinet No.
BSC6900
ADD BTSSFPMODE( Optional) SET BTSFORBIDTS( Optional) SET BTSOMLTS(Opt ional) SET BTSETHPORT( Optional) ADD BTSPPPLNK(O ptional) ADD BTSMPLNK(Opt ional) ADD BTSETHMA(Opt ional) ADD BTSETHLCMEP (Optional) ADD BTSTOPCONFI G(Optional) IMP BTSDEVIP(Opti onal) IMP BTSPPPLNK(O ptional) IMP
Number of the cabinet where the port is located GBFD-111202 O&M of BTS
CN
Cabinet No.
BSC6900
CN
Cabinet No.
BSC6900
LOD RETANTCFG(O ptional) SET BTSANTANGLE (Optional) SET BTSCLKPARA( Optional) SET BTSCAVFRQ(O ptional) SET BTSPMUDEF(O ptional) SET BTSTMA(Option al) SET RETANTENB(O ptional) STR BTSBATTTST( Optional) STR BTSTST(Manda tory) STR RETANTSCAN( Optional) STR TRANSPERFTS T(Optional) SWP OPR BTSBRDPWR( Mandatory)
Number of the cabinet GBFD-111202 O&M of BTS Number of the cabinet. GBFD-111202 O&M of BTS
CNFAULTDE LAY CN Fault Delay
BSC6900
Time delay in the detection of core network interface failure. Within the preset value of this parameter, the BSC6900 continuous ly detects core network interface failures and then releases the manageme SET nt right of GBSCREDGRP( service BSC Node Optional) objects. GBFD-113725 Redundancy Used to ADD uniquely GCNNODE(Man identify an datory) MSC GBFD-117401 MSC Pool ADD NSE(Mandatory) ADD SGSNNODE(Ma ndatory) ADD NRISGSNMAP( Mandatory) Uniquely identifies a node of SGSN, with the specified operator name GBFD-119701 SGSN Pool
CNID
MSC ID
BSC6900
CNID
SGSN Node ID
BSC6900
CNNODEIDX CN Node Index CNOPERAT ORINDEX Operator Index
BSC6900
BSC6900
ADD NRIMSCMAP(M andatory) SET MSGSOFTPAR A(Mandatory) SET AITFOTHPARA( Mandatory) SET BSCAITFTMR( Mandatory) ADD GCNNODE(Man datory) CMP LICENSE(Optio nal)
CNSTATEPO LICYFORGR CN State Policy OUP For Group
BSC6900
Index of an MSC. It is used in storing and querying the MSC attributes GBFD-117401 MSC Pool Index of the License operator MRFD-210403 Management Policy of the BSC6900 for judging whether the interface status of the core network is normal. If the value is NONE, the BSC6900 does not change the service manageme nt right. If the value is AINTFBLO CK, the BSC6900 releases the service manageme nt right when detecting SET disconnecti GBSCREDGRP( on at the A BSC Node Optional) interface. GBFD-113725 Redundancy
CNT
Records to Return
BSC6900
Number of returned alarm records. By default, all records can be EXP returned in ALMLOG(Option each Faulty al) query. MRFD-210304 Management Type of the cabinet. The slot and subrack arrangeme nts in a cabinet vary according SET to the BTSBAT(Manda cabinet tory) type. GBFD-111202 O&M of BTS
CNT
Cabinet Type
BSC6900
CNT
Cabinet Type
BSC6900
Type of the BTS cabinet SET where the BTSDPMUBP(M DMPU is andatory) installed GBFD-111202 O&M of BTS Maximum number of records allowed in SET the O&M of BSC LOGLIMIT(Optio operation GBFD-111203 Security nal) log MRFD-210305 Management
CNTL
Counts Limit
BSC6900
Upper count CNTRISTHR threshold of D raised fault
BSC6900
Assume that this threshold is not 0. When the accumulat ed number of alarm blink times exceeds the threshold, the alarm is reported. For querying the alarm blink measurem ent period, see "LST ALMBLKS W". For setting the alarm blink measurem ent period, SET see "SET ALMBLKPARA( ALMBLKS Faulty Optional) W". MRFD-210304 Management
Lower count CNTSTLTHR threshold of D raised fault
BSC6900
Assume that this threshold is not 0. When the number of alarm blink times is smaller than the threshold, the alarm is reported. For querying the alarm blink measurem ent period, see "LST ALMBLKS W". For setting the alarm blink measurem ent period, SET see "SET ALMBLKPARA( ALMBLKS Faulty Optional) W". MRFD-210304 Management Whether to adjust the candidate cell queue to give priority to HUAWEI I SET intraHandover GCELLHOBASI BSC/MSC GBFD-110601 HUAWEI II C(Optional) handover GBFD-510501 Handover
COBSCMSC ADJEN Co-BSC/MSC Adj BSC6900
CODE
Code
BSC6900
Number of a simple cell broadcast message. You can run "DSP GSMSCB" to query and obtain the information . The value of this parameter cannot be 0. This parameter, "Geograph y Scope", and "Update" uniquely decide a ADD cell GSMSCB(Mand broadcast Simplified Cell atory) message. GBFD-113602 Broadcast Whether to start the refrigeratio n equipment of the BTS. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSOUTPUT(O in another ptional) mode. GBFD-111202 O&M of BTS
COLDSET
Refrigeration Equipment
BSC6900
COLTYPE
Collection Type
BSC6900
Whether to collect offset COL information SoftSYNCINFO(Man by the BTS Synchronized datory) or cell GBFD-118201 Network Combined loss used to estimate the downlink power SET during GCELLPWRBA assignmen Active Power SIC(Optional) t GBFD-117602 Control Level of common access control, used for load control, allowing or forbidding Radio the access Common of some Channel users of Management SET common GBFD-111003 Location GCELLCCBASI access GBFD-110301 Updating C(Optional) levels GBFD-110302 IMSI Detach
COMBINERL OSS Combiner Loss
BSC6900
COMMACC
Common Access Control Class BSC6900
Complicacy
COMPRS
Password Complexity BTS Transfer Compression Rate
BSC6900
BSC6900
SET PWDPOLICY(O ptional) SET BTSBWPARA(O ptional)
Complexity of the Security password MRFD-210305 Management BTS compress rate. GBFD-111202 O&M of BTS
COMSC
Co-MSC
BSC6900
Whether the BSC that controls the external cell and the local BSC ADD belong to GEXT2GCELL( the same Optional) MSC
HUAWEI I Handover GBFD-110601 HUAWEI II GBFD-510501 Handover
CONBSCBT Connect BSC SIDTYPE BTS Index Type
BSC6900
ADD BTSABISHDLC PATH(Mandator y)
Recover CONGCLRT threshold of HD0 queue 0 [ms]
BSC6900
ADD PORTFLOWCT RLPARA(Option al)
BSC6900
BSC6900
Index type of the BTS connected to BSC If the duration for buffering the data in queue 0 is less than or equals to the value of this parameter, flow control is canceled. If the duration for buffering the data in queue 1 is less than or equals to the value of this parameter, flow control is canceled. If the duration for buffering the data in queue 2 is less than or equals to the value of this parameter, flow control is canceled.
2G/3G CoTransmission Resources Management MRFD-211503 on MBSC
None
None
None
None
BSC6900
BSC6900
BSC6900
If the duration for buffering the data in queue 3 is less than or equals to the value of this parameter, flow control is canceled. None If the duration for buffering the data in queue 4 is less than or equals to the value of this parameter, flow control is canceled. None If the duration for buffering the data in queue 5 is less than or equals to the value of this parameter, flow control is canceled. MRFD-211503
None
None
2G/3G CoTransmission Resources Management on MBSC
Congestion threshold of CONGTHD0 queue 0 [ms]
BSC6900
BSC6900
BSC6900
If the duration for buffering the data in queue 0 is more than or equals to the value of this 2G/3G Coparameter, Transmission flow control Resources is Management triggered. MRFD-211503 on MBSC If the duration for buffering the data in queue 1 is more than or equals to the value of this parameter, flow control is triggered. None None If the duration for buffering the data in queue 2 is more than or equals to the value of this parameter, flow control is triggered. None None
BSC6900
BSC6900
BSC6900
If the duration for buffering the data in queue 3 is more than or equals to or equals to the value of this parameter, flow control is triggered. None If the duration for buffering the data in queue 4 is more than or equals to the value of this parameter, flow control is triggered. None If the duration for buffering the data in queue 5 is more than or equals to the value of this parameter, flow control is triggered. MRFD-211503
None
None
CONHOEN
Concentric Circles HO Allowed
BSC6900
Whether to enable the concentric cell handover algorithm. The concentric cell handover helps to achieve wide coverage in the underlaid subcell and aggressive frequency reuse in the overlaid subcell and to improve the system capacity and conversati on quality. HUAWEI I SET The Handover GCELLHOBASI concentric GBFD-110601 HUAWEI II C(Optional) cell GBFD-510501 Handover Number of the port through which the DXX is ADD connected DXXCONNECT( to the Mandatory) BSC6900 MRFD-210206 Tree Topology Whether to connect ADD the power SUBRACK(Opti monitoring Configuration onal) board MRFD-210301 Management
CONNECTP ORTNO Connect Port No. BSC6900
CONNPWR
Connect power monitoring board BSC6900
CONNTYPE Connection Type BSC6900
Type of the connection between the NE and EMS or LMT. The connection can be a plain connection or SSL SET encryption O&M of BSC CONNTYPE(Ma connection GBFD-111203 Security ndatory) . MRFD-210305 Management Whether the Iur-g common connection is establishe d between the BSC and a coBSC6900 ADD RNC or an GIURGCONN(M external MBSC Load andatory) RNC. MRFD-211402 Balancing
CONNTYPE Connection Type BSC6900
CONTHOMI NINTV
Min Interval for Consecutive HOs BSC6900
Minimum interval between the two consecutiv e handover decisions of an MS. The BSC cannot make a handover decision during the minimum interval. To avoid frequent handover events in the cell, the BSC starts a timer after delivering a handover command to an MS. The BSC allows the MS to HUAWEI I SET make a Handover GCELLHOCTRL second GBFD-110601 HUAWEI II (Optional) handover GBFD-510501 Handover The twice intra-cell handover events during this interval are considered HUAWEI I SET consecutiv Handover GCELLHOAD(O e handover GBFD-110601 HUAWEI II ptional) events. GBFD-510501 Handover
CONTINTV
Interval for Consecutive HO Jud.
BSC6900
CONTPING
Continue ping or not
BSC6900
PING IP(Optional)
Whether to perform the PING operation continuous ly. When the continuous PING operation is performed, the system sends the PING packets to the specified IP address. You can stop the PING operation by using CTRL + Q. MRFD-211503
2G/3G CoTransmission Resources Management on MBSC 2G/3G CoTransmission Resources Management on MBSC
Count
Send PKT Count BSC6900
PING MAC(Optional) PING BTSCFM(Option Transmitte al) d packets MRFD-211503
CPRIDURAT S Duration Second BSC6900
Duration STR for starting BTSTST(Manda the CPRI BTS Test tory) Loop test GBFD-111207 Function This parameter specifies whether to allow the BSC6900 to enable or disable the power amplifier of a TRX TRX Power SET based on Amplifier GTRXDEV(Opti the traffic Intelligent onal) volume. GBFD-111602 Shutdown ADD CPU GCBSADDR(Ma number on Configuration ndatory) a board MRFD-210301 Management
CPS
Allow Dynamic Shutdown of TRX BSC6900
CPUN
CPU NO
BSC6900
CRC4CHK
CRC4 Check Switch
BSC6900
Whether to enable the BTS to SET support BTSCRC4(Man CRC4 datory) check GBFD-111202 O&M of BTS Cell reselection hysteresis. This is one of the parameters used for deciding whether to reselect cells in different location areas. This parameter can avoid the increase of network signaling traffic due to frequent location update and reduce the Basic Cell Rerisk of selection losing GBFD-110402 Location paging GBFD-110301 Updating messages. GBFD-110303 Paging
CRH
Cell Reselect Hysteresis Parameters
BSC6900
CRL
Certificate Revocation List File Name
BSC6900
Name of the SET certificate CERTFILE(Man revocation Security datory) list file MRFD-210305 Management
Certificate CRLEnableSt Revocation List a File State
BSC6900
Whether to enable the certificate revocation list DISABLE: indicating that the certificate revocation list is disabled ENABLE: indicating that the certificate SET revocation CERTFILE(Opti list is Security onal) enabled MRFD-210305 Management Time interval for Public Voice the BTS Group Call resending Service SET a channel Public Voice GCELLGSMR(O release GBFD-510301 Broadcast ptional) message GBFD-510302 Service Number of times the Public Voice BTS Group Call resends a Service SET channel Public Voice GCELLGSMR(O release GBFD-510301 Broadcast ptional) message GBFD-510302 Service
CRMSGRES Channel Release ENDINT Resend Interval BSC6900
CRMSGRES Channel Release ENDNUM Resend Number BSC6900
CRO
Cell Reselect Offset
BSC6900
Cell Reselect Offset (CRO), indicating a correction of the C2. Proper setting of this parameter can reduce the number of handover times, helpful for assigning an MS to a better cell. In a special case that the PT is 31, the larger the CRO value is, the lower the possibility of handing over an Basic Cell ReMS to the GBFD-110402 selection
CROCALTM Cross Call Detect THRD Time Threshold BSC6900
Threshold of the time for crosstalk detection. Within the threshold, if the call flag continuous ly appearing in the code stream is different from the one saved in a transcoder (TC) or a BTS, the TC or the BTS considers that a crosstalk occurs and sends a message to the BSC6900. SET Upon BSCBASIC(Opti receiving onal) such a GBFD-111203 O&M of BSC
CROSSIPFL Cross IP address AG available flag BSC6900
The field indicates whether the crossconnect path is available. When the cross-path is available, a maximum of four IP paths exists. The four IP paths are the IP path between the first local IP address and the first peer IP address, the IP path between the first local IP ADD address A over IP SCTPLNK(Optio and the GBFD-118602 A IP over nal) second GBFD-118622 E1/T1 Output range of the supplemen tary information contained in the CHR in common user mode. Multiple options can be SET selected at GCSCHRCTRL( the same Optional) time. GBFD-111203 O&M of BSC
CHR Supplementary CSADDTINF Info Output O Control
BSC6900
CSBQTHR
Bad Speech Quality Rate Threshold
BSC6900
Rate threshold of bad speech SET quality in GCSCHRCTRL( common Optional) user mode. GBFD-111203 O&M of BSC Whether MR is contained in the SET CHRs in GCSCHRCTRL( specified Optional) user mode GBFD-111203 O&M of BSC Whether the information about the specified abnormal call end is contained in the SET CHRs in GCSCHRCTRL( common Optional) user mode. GBFD-111203 O&M of BSC
CSCHRMR
CHR MR Output
BSC6900
CSCLTERM ABNORM
Abnormal Call End Output Control
BSC6900
CSDATADL
GSM CS data service downlink factor
BSC6900
GSM CS data ADD service TRMFACTOR(O downlink ptional) factor
GBFD-118605 IP QOS
CSDATAPAT H CS data path
BSC6900
ADD TRMMAP(Optio CS data nal) path
GBFD-118605 IP QOS
CSDATAPRI CS data priority
BSC6900
ADD TRMMAP(Optio CS data nal) priority
GBFD-118605 IP QOS
CSDATAUL
GSM CS data service uplink factor
BSC6900
GSM CS data ADD service TRMFACTOR(O uplink ptional) factor
GBFD-118605 IP QOS
CSDSP
CS Data Service PRI BSC6900
Priority of the CS data service. The parameter is used for BSC6900 flow control. The smaller the value of this ADD parameter, GCELL(Optional the higher GSM Flow ) the priority. GBFD-111705 Control Whether handover information is contained in the SET CHRs in GCSCHRCTRL( common Optional) user mode GBFD-111203 O&M of BSC Whether the MR before call release is contained in the SET CHRs in GCSCHRCTRL( common Optional) user mode. GBFD-111203 O&M of BSC Whether the MR before handover is contained in the SET CHRs in GCSCHRCTRL( common Optional) user mode. GBFD-111203 O&M of BSC
CSHOINFO
CHR Handover Information Output
BSC6900
CSMRBFCL R
Output MR Before Call Release
BSC6900
Output MR CSMRBFHO Before Handover BSC6900
CSOUTMOD CHR Output E Mode
BSC6900
CHR output mode. In common user mode, the CHRs of all the MSs specified by "CHR Output Range" are output. In specified user mode, the CHR of a specific MS, which is specified by running the ADD GCSCHR USER command, is output. These two modes can co-exist and they SET do not GCSCHRCTRL( affect each Optional) other. GBFD-111203 O&M of BSC
CSOUTRAN CHR Output GE Range
BSC6900
Area in which CHRs need to be output in common user mode. If this parameter is set to "Output All Records "in Cells, you need to run the SET GCSCHRS COPE command to specify the cells whose SET CHRs are GCSCHRCTRL( to be Optional) output GBFD-111203 O&M of BSC Whether to output the SET call history GCSCHRCTRL( record Mandatory) (CHR) GBFD-111203 O&M of BSC
CSRCDSW
CHR Function Switch
BSC6900
CSSIGINFO
CHR Signaling Output
BSC6900
Type of SET signaling GCSCHRCTRL( contained Optional) in CHRs
Congestion Start CSTARTTHD Threshold BSC6900
Threshold for starting LAPD link congestion control. This parameter cannot be set too high. If this parameter is set too high, the signaling link may be congested before congestion control is started. The congestion start and end thresholds cannot be set too low. If they are set too low, congestion SET control GTRXFC(Option may be GSM Flow al) started GBFD-111705 Control Type of the service whose SET CHR need GCSCHRCTRL( to be Optional) output GBFD-111203 O&M of BSC
CSTRAFTYP Service Type of E CHR Output
BSC6900
GSM CS voice service downlink CSVOICEDL factor
BSC6900
GSM CS voice ADD service TRMFACTOR(O downlink ptional) factor
GBFD-118605 IP QOS
CSVOICEINF CHR Speech O Information
BSC6900
Whether speech information is contained in the SET CHRs in GCSCHRCTRL( specified Optional) user mode. GBFD-111203 O&M of BSC
CSVOICEPA TH CS voice path
BSC6900
ADD TRMMAP(Optio CS voice nal) path
GBFD-118605 IP QOS
CSVOICEPR I CS voice priority
BSC6900
ADD TRMMAP(Optio CS voice nal) priority
GBFD-118605 IP QOS
GSM CS voice service uplink CSVOICEUL factor
BSC6900
GSM CS voice ADD service TRMFACTOR(O uplink ptional) factor
GBFD-118605 IP QOS
CSVSP
CS Voice Service PRI BSC6900
Priority of a speech service in the CS domain. The parameter is used for BSC6900 flow control. The smaller the value of this ADD parameter, GCELL(Optional the higher GSM Flow ) the priority. GBFD-111705 Control Selfhealing switch for the Ethernet SET adapter SLFSLVSW(Opt traffic ional) monitoring None
CSW
Self-healing Switch for Ethernet Adapter Traffic Monitoring BSC6900
None
CT1
Timer alignment ready
BSC6900
Timer alignment ready. Timer T1 is started after the MTP2 link enters the Aligned Ready state. If one end of the MTP2 link receives an FISU or MSU message from the peer end within the period of time defined by T1, the MTP2 link enters the In-service state. In other cases, T1 ADD expires, A Interface MTP3LNK(Optio and the Protocol nal) MTP2 link GBFD-111804 Process
CT2
Timer not aligned BSC6900
Timer not aligned. Timer T2 is started at the time that the MTP2 link is set up and begins to transmit the SIO message. If one end of the MTP2 link receives an SIO, SIN, or SIE message from the peer end with the period of time defined by T2, the MTP2 link enters the next state. In other cases, T2 ADD expires, A Interface MTP3LNK(Optio and the Protocol nal) MTP2 link GBFD-111804 Process
CT3
Timer aligned
BSC6900
Timer aligned. Timer T3 is started at the time that the MTP2 link enters the aligned state and starts to transmit SIN (normal alignment) or SIE (emergenc y alignment) message. If one end of the MTP2 link receives an SIN or SIE message from the peer end with the period of ADD time A Interface MTP3LNK(Optio defined by Protocol nal) T3, the GBFD-111804 Process
CT4E
Timer emergency proving BSC6900
Timer emergency proving. The two ends of the MTP2 link exchange messages after entering the emergency verification state. Each end verifies the correctnes s of the messages sent from the peer end. If the error rate of the messages reaches the threshold specified by the protocol, ADD the MTP2 A Interface MTP3LNK(Optio link is Protocol nal) considered GBFD-111804 Process
CT4N
Timer normal proving
BSC6900
Timer normal proving. The two ends of the MTP2 link exchange messages after entering the normal verification state. Each end verifies the correctnes s of the messages sent from the peer end. If the error rate of the messages reaches the threshold specified by the protocol, the MTP2 ADD link is A Interface MTP3LNK(Optio considered Protocol nal) unavailabl GBFD-111804 Process
CT5
Timer sending SIB
BSC6900
Timer sending SIB. If one end of the MTP2 link detects congestion , it sends SIB indications to the peer end at an interval specified by timer T5. This parameter only applies to the 64 kbit/s links. For the 2 Mbit/s links, the value of ADD this timer A Interface MTP3LNK(Optio is always Protocol nal) 100. GBFD-111804 Process
CT6
Timer remote congestion
BSC6900
Timer remote congestion . A link is considered broken when the remote congestion duration exceeds the value specified by timer T6. This parameter only applies to the 64 kbit/s links. For the 2 Mbit/s links, the value of ADD this timer A Interface MTP3LNK(Optio is always Protocol nal) 5000. GBFD-111804 Process
CT7
Timer excessive delay of acknowledgement BSC6900
Timer excessive delay acknowled gement. A link is considered broken if one end of the link does not receive a verification message from the peer end within the period of time defined by timer T7 after sending a message. This parameter only applies to the 64 kbit/s links. For the 2 ADD Mbit/s A Interface MTP3LNK(Optio links, the Protocol nal) value of GBFD-111804 Process
CT9
Timer interval of resending FISU
BSC6900
Timer interval of resending FISU. Timer T9 specifies the interval at which the BSC sends the FISU frames. That is, the BSC sends an FISU frame every N (N indicates the period of time defined by T9) when the MTP2 link is idle. This parameter only applies to the 64 kbit/s links. For the 2 ADD Mbit/s A Interface MTP3LNK(Optio links, the Protocol nal) value of GBFD-111804 Process
CTHD
Critical threshold BSC6900
Critical threshold of CPU usage. When the CPU usage in "Fast judgement window" reaches or exceeds the threshold, all active flow control functions are implement ed. Otherwise, the correspond ing flow SET control FCCPUTHD(Opt mechanis GSM Flow ional) m is used. GBFD-111705 Control Critical threshold of packet queue usage. When the packet queue usage reaches or exceeds the threshold, all active flow control functions SET are FCMSGQTHD( implement GSM Flow Optional) ed. GBFD-111705 Control ADD DPC of the SoftAISSCFG(Mand control Synchronized atory) BSC GBFD-118201 Network
CTHD
Critical threshold BSC6900
CTRBSCDP C Control BSC DPC BSC6900
Control CTRLACKTY Acknowledge PE Type
BSC6900
Format of the control acknowled ge message of the MS. Four access bursts are used to obtain timing advance without sending polling message; RLC/MAC control block is used to obtain timing advance after SET sending GCELLPSBASE polling (Optional) message. GBFD-114101 GPRS SET BTSLOADCTRL Control (Mandatory) Flag
CTRLFLAG
Control Flag
BSC6900
CTRLPORTC Control Port N Cabinet No.
BSC6900
Number of the cabinet which ADD controls BTSRETANT(M RET Remote andatory) antenna. MRFD-210602 Electrical Tilt
CTRLPORTN O Control Port No.
BSC6900
ControlPor t No. of RET antenna. The number of RET antenna which connect to same feed tributary cannot be more than 6.For GATM boards, the valid value ranges from 0 to 5. For RXU boards, the valid value ADD ranges BTSRETANT(M from 0 to Remote andatory) 2. MRFD-210602 Electrical Tilt Number of the slot where the board controlling the RET antenna is located. For SingleRAN BTSs, the valid value ranges from 0 to 5. For nonSingleRAN BTSs, the valid value ADD ranges BTSRETANT(M from 0 to Remote andatory) 23. MRFD-210602 Electrical Tilt Number of the subrack ADD where the BTSRETANT(M BTS board Remote andatory) is located MRFD-210602 Electrical Tilt
CTRLPORTS Control Port Slot N No.
BSC6900
CTRLPORTS Control Port RN Subrack No.
BSC6900
CTRLSLOT
Slot No.
BSC6900
Slot number of the MPU Subsystem for the centralized ADD manageme RSCGRP(Mand nt of the atory) resources GBFD-118605 IP QOS Number of the BSC6900 slot where the XPU of SET the control BTSCTRL(Mand plane is atory) located GBFD-111202 O&M of BTS Number of the BSC6900 subrack where the XPU of the SET control BTSCTRL(Mand plane is atory) located GBFD-111202 O&M of BTS Configurati on rollback control switch that is used to specify whether to support the SET configurati CMCTRLSW(M on rollback Configuration andatory) function MRFD-210301 Management
CTRLSN
Control Plane Slot No.
BSC6900
CTRLSRN
Control Plane Subrack No.
BSC6900
CTRLSW
CM Control Enable Switch
BSC6900
CurChannelIn HO_RQD Current HoRqd Channel BSC6900
Whether an HO_RQD message SET contains A Interface MSGSOFTPAR the Current Protocol A(Optional) Channel GBFD-111804 Process SET BTSAUTODLDA CTINFO(Mandat ory) SET GCSFILE(Optio nal) C-version number of the BTS software GBFD-111202 O&M of BTS Period of new file generation. None None
CVer
CYCLE
C-Version No. Period of New File Generation[min]
BSC6900
BSC6900
DATAFILE
Data file
BSC6900
This is the data file for upgrading board. The data file names of UPD different BSC/RNC JTGCPLD(Mand boards are Software atory) different. MRFD-210401 Management
DATAQUAFL Filter Length for TLEN TCH Qual
BSC6900
Number of measurem ent reports sampled for averaging the signal quality on a speech/dat a channel. Averaging the signal quality in multiple measurem ent reports helps to avoid a sharp signal quality drop due to Rayleigh fading and to ensure the comprehen HUAWEI I SET siveness of Handover GCELLHOFITP a handover GBFD-110601 HUAWEI II EN(Optional) decision. GBFD-510501 Handover
DATASTRFL Filter Length for TLEN TCH Level
BSC6900
Number of measurem ent reports sampled for averaging the signal strength on a speech/dat a channel. Averaging the signal strength in multiple measurem ent reports helps to avoid a sharp signal level drop due to Rayleigh fading and to ensure the comprehen HUAWEI I SET siveness of Handover GCELLHOFITP a handover GBFD-110601 HUAWEI II EN(Optional) decision. GBFD-510501 Handover Data service supported by the BSC6900. You can set this G3 Fax (TS61, parameter TS62) according 14.4kbit/s SET to actual GBFD-110204 Circuit GCELLOTHEXT requiremen GBFD-119405 Switched Data (Optional) ts. GBFD-110205 Bearer Service Whether to limit the operation O&M of BSC date of the GBFD-111203 Security operator MRFD-210305 Management
DATATRAFF Data Service SET Allowed
BSC6900
DATE
Date Limit
BSC6900
ADD OP(Optional) SET TIME(Optional)
DATE
Date
BSC6900
Date
Prohib DynShutdown DateRangeIn TRX dex DateRangeIdx
BSC6900
Unique number of the date range during which to disable the BSC from shutting down the ADD TRX BSCDSTPADAT dynamicall E(Mandatory) y GBFD-111602 SET BTSAUTODLDA CTINFO(Mandat ory)
Day
Day
BSC6900
Date when the TMU board software is released GBFD-111202 O&M of BTS
DBD
Dead Band
BSC6900
Temperatu re error allowed when the temperatur e control system adjusts the temperatur e. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDHEUBP(O in another ptional) mode. GBFD-111202 O&M of BTS
BCCH IUO of DBFREQBC Double CHIUO Frequency Cell
BSC6900
Whether the primary BCCH is configured on the inner or extra part of an intelligent ADD underlayGCELL(Mandato overlay ry) (IUO) cell GBFD-114501 Co-BCCH Cell Index of a same group cell in an ADD enhanced GCELL(Mandato dual band ry) network
DBLFREQAD Same Group Cell JCID Index BSC6900
Enhanced DualGBFD-114402 Band Network
DBLFREQAD Same Group Cell JCNAME Name BSC6900
Name of a same group cell in an ADD enhanced GCELL(Mandato dual band Enhanced Dualry) network GBFD-114402 Band Network Index type of a same group cell in an ADD enhanced GCELL(Mandato dual band Enhanced Dualry) network GBFD-114402 Band Network DC Lowvoltage SET Alarm BTSALMPORT( Cabinet Mandatory) No. GBFD-111202 O&M of BTS DC SET Lowvoltage BTSALMPORT( Alarm Port Mandatory) No. GBFD-111202 O&M of BTS DC SET Lowvoltage BTSALMPORT( Alarm Slot Mandatory) No. GBFD-111202 O&M of BTS
DBLFREQAD Same Group Cell JIDTYPE Index Type BSC6900
DCLACN
DC Low Voltage Alarm Cabinet No.
BSC6900
DCLAPN
DC Low Voltage Alarm Port No.
BSC6900
DCLASN
DC Low Voltage Alarm Slot No.
BSC6900
DCLASRN
DC Low Voltage Alarm Subrack No.
BSC6900
DCVLTHD
DC Voltage Lower Threshold BSC6900
DC Lowvoltage SET Alarm BTSALMPORT( Subrack Mandatory) No. GBFD-111202 O&M of BTS DC voltage alarm lower threshold. When the busbar output voltage is lower than the value of this parameter, an alarm indicating the abnormal busbar voltage is reported. In multimode scenario, the value of this parameter in one mode must be the same as the value of the SET correspond BTSAPMUBP(O ing ptional) parameter GBFD-111202 O&M of BTS
DCVOLALAR DC Overvoltage MH Alarm Threshold
BSC6900
The BTS reports an alarm if the DC voltage exceeds the value of this parameter. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another Faulty ptional) mode. MRFD-210304 Management The BTS reports an alarm if the DC voltage is lower than the value of this parameter. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another Faulty ptional) mode. MRFD-210304 Management
DC Under DCVOLALAR Voltage Alarm ML Threshold
BSC6900
DCVUTHD
DC Voltage Upper Threshold BSC6900
DC voltage alarm upper threshold. When the busbar output voltage is higher than the value of this parameter, an alarm indicating the abnormal busbar voltage is reported. In multimode scenario, the value of this parameter in one mode must be the same as the value of the SET correspond BTSAPMUBP(O ing ptional) parameter GBFD-111202 O&M of BTS
DefaultDynP Number of dchPreTranN Dynamic Channel um Pre-Converted BSC6900
This parameter specifies the default preconverted PDCHs in the dynamic transferabl e channel pool. When this parameter is greater than 0, three sublinks are bound to the static PDCH and preconverted PDCH in a cell by default. The preconverted PDCH can be preempted. SET You can PDCH GCELLPSCHM( set Dynamic Optional) "Number of GBFD-113101 Adjustment
DELAYSEND RFCHREL T3111
BSC6900
Timer for delaying a connection release. This parameter is used for delaying the channel deactivatio n after the active signaling link is broken. The purpose is to reserve some time for the disconnecti on that may be repeated. After receiving a REL IND message sent by the BTS, the SET BSC6900 GCELLTMR(Opt starts the ional) timer. GBFD-110501 Call Control ADD M3DE(Mandator y) ADD M3RT(Mandator y) ADD M3LKS(Mandato ry) The destination entity number uniquely identifies a A over IP destination GBFD-118602 A IP over entity. GBFD-118622 E1/T1 Description of the O&M of BSC operator GBFD-111203 Security account MRFD-210305 Management
DENO
Destination entity No. BSC6900
DESC
Description
BSC6900
ADD OP(Optional)
DESTEALSE Anti-theft T Equipment
BSC6900
Whether to start the anti-theft equipment of the BTS. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSOUTPUT(O in another ptional) mode. GBFD-111202 O&M of BTS
DESTIP
Destination IP address
BSC6900
PING IP(Mandatory)
Destination IP address None
None
DESTIP
BSC6900
TRC IPADDR(Mandat Destination ory) IP address None ADD IPRTBIND(Man Destination datory) IP address None
None
DESTIP
BSC6900
None
DESTMEPID RMEP ID
BSC6900
PING MAC(Mandatory ) TRC MAC(Mandatory ) PING BTSCFM(Manda tory) TRC BTSCFM(Manda tory)
Identifies a maintenan ce point in the maintenan ce group None
None Compact BTS Automatic Configuration and Planning
Transport Link DESTNODE Type
BSC6900
Type of the object the ADD BTS is BTSAUTOPLAN connected (Mandatory) to GBFD-510701
DESTNODE Dest Node Type
BSC6900
Type of the object the BTS is connected to. Value range: ADD BTS, BTSCONNECT( BSC6900, Mandatory) and DXX GBFD-111202 O&M of BTS Slot No. of the subsystem where the Iur-g common connection is establishe ADD d to the coGIURGCONN(M BSC6900 MBSC Load andatory) RNC MRFD-211402 Balancing Subrack No. of the subsystem where the Iur-g common connection is establishe ADD d to the coGIURGCONN(M BSC6900 MBSC Load andatory) RNC MRFD-211402 Balancing
DESTSN
Peer Slot No.
BSC6900
DESTSRN
Peer Subrack No. BSC6900
DESTSSN
Peer Subsystem No.
BSC6900
No. of the subsystem where the Iur-g common connection is establishe ADD d to the coGIURGCONN(M BSC6900 MBSC Load andatory) RNC MRFD-211402 Balancing ID of the TRX that carries the MOV destination BCCH(Mandator main Configuration y) BCCH MRFD-210301 Management
Destination Main DESTTRXID BCCH TRX ID BSC6900
Period of Mute DETECTFRA Detect Class2 MEPERIOD TRAU Frame
BSC6900
Interval for sending test TRAU frames in the period of class-2 mute detection.T est TRAU frame is sent at the specified interval till the peer end responds or the timer of "Period of Mute SET Detection GCELLSOFT(O Class 2" ptional) expires. GBFD-111203 O&M of BSC
DETECTMUL T Detect Period Switch for Abis DETECTSWI Timeslot TCH Detection DEVICENAM E Device Name
BSC6900
Maximum number of periods in which the local end does not receive BFD packets from the peer end. If the number of periods in which the local end does not receive BFD packets from the peer end reaches this parameter, the BTS reports a ADD BFD IP Fault BTSBFD(Option session Detection al) fail. GBFD-118609 Based on BFD SET BTSABISTROP( Mandatory) ADD BTSRETANT(M andatory) Switch for Abis Timeslot Detection Name of the RET antenna
BSC6900
GBFD-111202 O&M of BTS Remote MRFD-210602 Electrical Tilt
BSC6900
DEVICENO
Device No.
BSC6900
ADD Number of BTSRETANT(M the RET Remote andatory) antenna. MRFD-210602 Electrical Tilt ADD PPPLNK(Manda tory) ADD MPGRP(Mandat ory) Device IP address of the interface board used by the PPP link. None
DEVIP
Borrowed device IP address BSC6900
None
DEVTYPE
Device IP Address Type
BSC6900
ADD Device IP DEVIP(Mandato Address ry) Type
None
None
DF
DL UARFCN
BSC6900
ADD GEXT3GCELL( Mandatory) SET GCELLHOFDD BA2(Mandatory) SET GCELLHOTDD BA2(Mandatory)
Downlink frequency of the external 3G cell
GSM/WCDMA Interoperability GSM/TDGBFD-114301 SCDMA GBFD-114302 Interoperability
DFCBSN
DFCB Board SN
BSC6900
Number of the slot SET where the BTSDFCUBP(O DFCB is ptional) installed GBFD-111202 O&M of BTS Number of the subrack SET where the BTSDFCUBP(O DFCB is ptional) installed GBFD-111202 O&M of BTS The default DPC correspond s to the CN of the primary operator. When only one DPC is configured, this parameter must be set to "YES", indicating that all the calls for the operator are accessed through the CN identified by the DPC. When multiple DPCs are ADD configured, GCNNODE(Opti this onal) parameter GBFD-117401 MSC Pool
DFCBSRN
DFCB Board SRN
BSC6900
DFDPC
Default DPC
BSC6900
DFTPORTS WT
The Type of FTP Server Command Port BSC6900
Whether to use the customized port DEFAULT PORT: indicating that the FTP server uses the default port 21 as a command port and port 20 as a data port to provide FTP services CUSTOMP ORT: indicating that the FTP server uses the customized port to SET provide O&M of BSC FTPSSRV(Mand FTP GBFD-111203 Security atory) services MRFD-210305 Management Period for reporting differential BSC/RNC GPS data MRFD-210502 Clock
DGPSPERIO DGPS data report D period[min] BSC6900
ADD GPS(Optional)
DHCP Relay DHCPRLYG Gateway IP ATEWAYIP Address
BSC6900
This parameter indicates the IP Address of Abis IP over ADD DHCP E1/T1 DHCPRLY(Man Relay GBFD-118611 A IP over datory) Gateway. GBFD-118622 E1/T1 ADD DHCPRLY(Man DHCP datory) Relay ID
DHCPRLYID DHCP Relay ID
BSC6900
None
None
DIESELENGI NESAVESWI Diesel Engine TCH Save Switch
BSC6900
Whether to enable the diesel SET engine BTSDPMUBP(O save ptional) switch GBFD-111202 O&M of BTS
DIFFBANDS Different Band DCCHUSING SDCCH Using OPTIMIZE Optimize
BSC6900
Whether to allow an MS to report the classmark and whether to hand over the MS from the SDCCH in the frequency band for the main BCCH to the SDCCH in a different SDCCH frequency Handover band Enhanced SET according Channel GCELLCHMGB to the GBFD-110608 Assignment ASIC(Optional) classmark GBFD-111005 Algorithm
DINM
Date in Month
BSC6900
Day in the month on which the ADD command SUBTSK(Manda can be tory) executed. GBFD-111203 O&M of BSC
DINW
Date in Week
BSC6900
Day in the week on which the ADD command SUBTSK(Manda can be tory) executed. GBFD-111203 O&M of BSC The DLD LICENSE(Mand atory) ULD LICENSE(Mand atory) relative path in the working path of the FTP user O&M of BSC in the FTP GBFD-111203 License server MRFD-210403 Management
DIR
Directory
BSC6900
DIR
File Directory
BSC6900
DLD RETANTCFG(O ptional) DLD BTSPATCH(Opt ional) ULD BTSLOG(Option al) DLD BTSSW(Optiona l)
Directory of the software to be downloade d GBFD-111202 O&M of BTS
DirectedRetry Directed Retry AssFailSend AssFail Send Enable Enable
BSC6900
Whether the BSC sends an Assignmen t Fail message with the cause value of directed retry to the MSC before the BSC initiates a SET directed AITFOTHPARA( retry Optional) procedure GBFD-110607 Direct Retry
DIRECTRYE N Directed Retry
BSC6900
Whether to enable a directed retry. The directed retry is to hand over an MS to a neighborin g cell in the same procedure as the handover. The directed retry is an emergency measure applicable to abnormal traffic peaks in some areas of a radio network. You should not use the directed SET retry as a GCELLBASICP major ARA(Optional) means of GBFD-110607 Direct Retry
DIRMAGANS Directly Magnifier ITEFLAG BTS Flag BSC6900
Whether a cell is a repeater. With simpler functions than a BTS, a repeater is a coverage extension device of a BTS. It is applied to widelystretched areas or indoor areas to solve the dead zone problem of BTS coverage. Using repeaters cannot increase the traffic capacity of a network SET but GCELLSOFT(O improve HUAWEI I ptional) the GBFD-110601 Handover
DisconnectH Disconnect andoverProte Handover Protect ctTimer Timer BSC6900
SET OTHSOFTPAR A(Optional) ADD GEXT3GCELL( Mandatory) SET GCELLHOFDD BA2(Mandatory) SET GCELLHOTDD BA2(Mandatory)
Timer to control the duration in which the BSC prevents the handover of an MS from which the BSC receives the Disconnect message. If the MS is handed over to a new cell after the MS sends the Disconnect message, the MS cannot receive the Release Acknowled gement message HUAWEI I from the Handover original GBFD-110601 HUAWEI II cell. Thus, GBFD-510501 Handover Whether to activate transmit diversity on the common channel of GSM/WCDMA a 3G cell GBFD-114301 Interoperability
DIVERSITY
Diversity
BSC6900
Diversity DIVERT16Q Transmitter AMDELAY 16QAM Delay
BSC6900
Delay of transmit diversity when 16QAM is used. Generally, the parameter is applicable to general fading environme nts. The transmit diversity can generally bring a gain of 3 dB to 5 dB. The fading conditions vary with the MS location; therefore, MSs in a fixed time delay SET obtain GCELLBASICP different Downlink ARA(Optional) gains. In GBFD-510804 EGPRS2-A
Diversity DIVERT32Q Transmitter AMDELAY 32QAM Delay
BSC6900
Delay of transmit diversity when 32QAM is used. Generally, the parameter is applicable to general fading environme nts. The transmit diversity can generally bring a gain of 3 dB to 5 dB. The fading conditions vary with the MS location; therefore, MSs in a fixed time delay SET obtain GCELLBASICP different Downlink ARA(Optional) gains. In GBFD-510804 EGPRS2-A
Diversity DIVERT8PS Transmitter 8PSK KDELAY Delay BSC6900
Delay of transmit diversity when 8PSK is used. Generally, the parameter is applicable to general fading environme nts. The transmit diversity can generally bring a gain of 3 dB to 5 dB. The fading conditions vary with the MS location; therefore, MSs in a fixed time delay SET obtain GCELLBASICP different ARA(Optional) gains. In GBFD-114201 EGPRS Whether to support transmittin g diversity SET or four BTSRXUBP(Opt diversity Transmit ional) receiving GBFD-115902 Diversity Minimum interval between two consecutiv e downlink SET power HUAWEI III GCELLPWR3(O control Power Control ptional) commands GBFD-117601 Algorithm
DivSwitch
Four Diversity Receiver
BSC6900
DLADJPRD
PwrCtrlDLAdjPeri od BSC6900
DLAFSREXQ UALHIGHTH DLAFSRexQualH RED ighThred BSC6900
If the downlink receive quality level of an AMR full rate call is greater than this parameter, the call needs to undergo Huawei power SET control HUAWEI III GCELLPWR3(O generation Power Control ptional) III. GBFD-117601 Algorithm If the downlink receive quality level of an AMR full rate call is smaller than this parameter, the call needs to undergo Huawei power SET control HUAWEI III GCELLPWR3(O generation Power Control ptional) III. GBFD-117601 Algorithm
DLAFSREXQ UALLOWTH DLAFSRexQualL RED owThred BSC6900
DLAHSREX QUALHIGHT DLAHSRexQualH HRED ighThred BSC6900
If the downlink receive quality level of an AMR half rate call is greater than this parameter, the call needs to undergo Huawei power SET control HUAWEI III GCELLPWR3(O generation Power Control ptional) III. GBFD-117601 Algorithm If the downlink receive quality level of an AMR half rate call is smaller than this parameter, the call needs to undergo Huawei power SET control HUAWEI III GCELLPWR3(O generation Power Control ptional) III. GBFD-117601 Algorithm ID of the data link connection of the NSVC. It is an interworkin g parameter which must be consistent ADD on the NSVC(Mandator BSC and y) the peer. GBFD-510002 Gb Over FR
DLAHSREX QUALLOWT DLAHSRexQualL HRED owThred BSC6900
DLCI
The Identifier of Data Link Connection
BSC6900
DLCOEFFICI Fast DL Priority ENTTSRAPI Decision DADJ Threshold
BSC6900
If the ratio of downlink flux to uplink flux is greater than or equal to the threshold during the fast flux measurem ent, the downlink SET services BSCPSSOFTPA takes RA(Optional) priority. GBFD-119501
Adaptive Adjustment of Uplink and Downlink Channels
DLDCSPT
Support Downlink Dual-Carrier BSC6900
DLEDGETH RES
Edge HO DL RX_LEV Threshold
BSC6900
Whether SET the cell GCELLGPRS(O supports Dual Carriers ptional) DLDC GBFD-510802 in Downlink Threshold for downlink edge handover. If the downlink receive level remains less than this threshold for a period of time, the edge handover is triggered. If the PBGT handover algorithm is enabled, this threshold can be decreased accordingly . If the HUAWEI I SET PBGT Handover GCELLHOBASI handover GBFD-110601 HUAWEI II C(Optional) algorithm GBFD-510501 Handover
DLFILTADJF III DL Filter Adjust ACTOR Factor BSC6900
Filter adjustment factor for downlink power control. Setting this parameter high helps to smooth the filtered values and to reduce the impact of poor measurem ent reports on the filtered values. Setting this parameter low helps to draw the filtered values close to the actual values and to heighten SET the power HUAWEI III GCELLPWR3(O control Power Control ptional) effect. GBFD-117601 Algorithm
DLFSREXQU ALHIGHTHR DLFSRexQualHig ED hThred BSC6900
Upper quality threshold for Huawei power control generation III on a full rate call. If the downlink receive quality level of a full rate call is greater than this threshold, the call needs to undergo Huawei power SET control HUAWEI III GCELLPWR3(O generation Power Control ptional) III. GBFD-117601 Algorithm
DLFSREXQU ALLOWTHR DLFSRexQualLo ED wThred BSC6900
Lower quality threshold for Huawei power control generation III on a full rate call. If the downlink receive quality level of a full rate call is smaller than this threshold, the call needs to undergo Huawei power SET control HUAWEI III GCELLPWR3(O generation Power Control ptional) III. GBFD-117601 Algorithm
Downlink GPRS TBF Window DlGprsTbfEx Expansion pandOp Optimization
BSC6900
Expanded size of the GPRS RLC window. This parameter is used to expand the size of the GRPS RLC window. The expanded window size breaks the restrictions of 64 defined in the protocol and reduces the probability SET of GRPS GCELLPSOTHE RLC RPARA(Optiona window l) stopping. GBFD-114101 GPRS
DLHSREXQ UALHIGHTH DLHSRexQualHi RED ghThred BSC6900
Upper quality threshold for Huawei power control generation III on a half rate call. If the downlink receive quality level of a half rate call is greater than this threshold, the call needs to undergo Huawei power SET control HUAWEI III GCELLPWR3(O generation Power Control ptional) III. GBFD-117601 Algorithm
DLHSREXQ UALLOWTH DLHSRexQualLo RED wThred BSC6900
Lower quality threshold for Huawei power control generation III on a half rate call. If the downlink receive quality level of a half rate call is smallter than this threshold, the call needs to undergo Huawei power SET control HUAWEI III GCELLPWR3(O generation Power Control ptional) III. GBFD-117601 Algorithm
DLHYSTF1
AMR DL Coding Rate adj.hyst1[F] BSC6900
Adjustment hysteresis 1 of AMR downlink coding rate (full rate). According to a certain algorithm and the radio quality indication (RQI) in the call measurem ent report, the MS and the BTS automatica lly adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the SET threshold GCELLCCAMR( of the RQI, Optional) which is GBFD-115501 AMR FR
DLHYSTF2
DLHYSTF3
DLHYSTH1
AMR DL Coding Rate adj.hyst1[H] BSC6900
Adjustment hysteresis 1 of AMR downlink coding rate (half rate). According to a certain algorithm and the radio quality indication (RQI) in the call measurem ent report, the MS and the BTS automatica lly adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the SET threshold GCELLCCAMR( of the RQI, Optional) which is GBFD-115502 AMR HR
DLHYSTH2
DLHYSTH3
AMR DL Coding Rate DLHYSTWB1 adj.hyst1[WB]
BSC6900
Adjustment hysteresis 1 of AMR downlink coding rate (wide band). According to a certain algorithm and the radio quality indication (RQI) in the call measurem ent report, the MS and the BTS automatica lly adjust the current speech coding and decoding rate. The adjustment threshold of coding SET rate is the GCELLCCAMR( threshold Optional) of the RQI, GBFD-115507 WB AMR
AMR DL Coding Rate DLHYSTWB2 adj.hyst2[WB]
BSC6900
Adjustment hysteresis 2 of AMR downlink coding rate (wide band). According to a certain algorithm and the radio quality indication (RQI) in the call measurem ent report, the MS and the BTS automatica lly adjust the current speech coding and decoding rate. The adjustment threshold of coding SET rate is the GCELLCCAMR( threshold Optional) of the RQI, GBFD-115507 WB AMR
DLINTERFLE Interf.of DL Level VLIMIT Threshold BSC6900
Threshold for determinin g whether downlink interferenc e exists. If the downlink level is equal to or greater than "Interf.of DL Level Threshold" and the downlink quality level is equal to or greater than "Interf.of DL Qual.Thres hold", downlink interferenc e exists. The value HUAWEI I SET range 0 to Handover GCELLCHMGA 63 is GBFD-110601 HUAWEI II D(Optional) mapped to GBFD-510501 Handover
DLINTERFQ Interf.of DL UALLIMIT Qual.Threshold
BSC6900
Threshold for determinin g whether downlink interferenc e exists. If the downlink level is equal to or greater than "Interf.of DL Level Threshold" and the downlink quality level is equal to or greater than "Interf.of DL Qual.Thres hold", HUAWEI I SET downlink Handover GCELLCHMGA interferenc GBFD-110601 HUAWEI II D(Optional) e exists. GBFD-510501 Handover When the downlink load of a cell is larger than the value of this parameter and is smaller than "2G Cell DL Overload Congest Thred", the downlink of the cell is SET in the GCELLHOINTE basic RRATLDB(Optio congestion nal) status. GBFD-511103
DlLdrThrd2G 2G Cell DL Basic Cell Congest Thred BSC6900
GSM and UMTS Load Balancing Based on Iur-g
DLLEVFILTL Filter Length for EN DL RX_LEV
BSC6900
Number of measurem ent reports sampled for averaging downlink signal strength. A single measurem ent report may not reflect the actual network situations accurately. Therefore, the BSC needs to average the measured values in several successive measurem ent reports to reflect SET the radio Enhanced GCELLPWR2(O environme Power Control ptional) nt. GBFD-110703 Algorithm
Downlink LongDLLTFERLO term FER Lower WTH Threshold
BSC6900
Lower voice quality threshold associated with the automatic adjustment of the AMR downlink handover threshold. The value of this parameter must be smaller than or equal to the value of Downlink SET Long-term GCELLCCAMR( FER Optional) Target. GBFD-115506
DLLTFERTG Downlink LongT term FER Target BSC6900
Target value of the voice quality automatica lly adjusted through the downlink SET threshold GCELLCCAMR( of AMR Optional) handover GBFD-115506
Downlink LongDLLTFERUP term FER Upper TH Threshold
BSC6900
Upper voice quality threshold associated with the automatic adjustment of the AMR SET handover GCELLCCAMR( downlink Optional) threshold. GBFD-115506
Downlink DLLTTHADJ Threshold Adjust FA Factor BSC6900
Factor of downlink threshold adjustment . It indicates the linear relation between the threshold adjustment value and SET the GCELLCCAMR( logarithmic Optional) FER. GBFD-115506 Maximum step by which to decrease downlink power SET according GCELLPWR3(O to signal ptional) strength Maximum step by which to increase downlink power SET according GCELLPWR3(O to signal ptional) strength
DLMAXDOW NSTEP DLMAXDownStep BSC6900
HUAWEI III Power Control GBFD-117601 Algorithm
DLMAXUPST EP DLMAXUpStep
BSC6900
HUAWEI III Power Control GBFD-117601 Algorithm
2G Cell DL DlOlcThrd2G Overload Cell Congest Thred
BSC6900
DLPREDLEN DL MR. Number D Predicted
BSC6900
When the downlink load of a cell is greater than the value, the downlink of the cell is SET in the GSM and GCELLHOINTE overload UMTS Load RRATLDB(Optio congestion Balancing nal) status. GBFD-511103 Based on Iur-g Number of downlink measurem ent reports that the BSC predicts. The BSC takes a while to confirm the power control effect of a power control command. Thus, the BSC makes a power control decision based on a measurem ent report that lags behind the changes in the receive level and SET quality Enhanced GCELLPWR2(O instead of Power Control ptional) reflecting GBFD-110703 Algorithm
DLQHIGHTH DL Qual. Upper RED Threshold
BSC6900
Quality level threshold for decreasing downlink signal power. If the BTS transmits signals at a quality level less than this threshold, the BSC decreases the power of the BTS. If (downlink receive level "MAX Down Adj. PC Value by Qual.") < "DL RX_LEV Lower Threshold" SET , the BSC Enhanced GCELLPWRBA does not Power Control SIC(Optional) adjust the GBFD-110703 Algorithm
DLQLOWTH DL Qual. Lower RED Threshold
BSC6900
Quality level threshold for increasing downlink signal power. If the BTS transmits signals at a quality level greater than this threshold, the BSC increases the power of the BTS. If (downlink receive level + "MAX Up Adj. PC Value by Qual.") > "DL RX_LEV Upper SET Threshold" Enhanced GCELLPWRBA , the BSC Power Control SIC(Optional) does not GBFD-110703 Algorithm
DLQUAFILTL Filter Length for EN DL Qual.
BSC6900
Number of measurem ent reports sampled for averaging downlink signal quality. A single measurem ent report may not reflect the actual network situations accurately. Therefore, the BSC needs to average the measured values in several successive measurem ent reports to reflect SET the radio Enhanced GCELLPWR2(O environme Power Control ptional) nt. GBFD-110703 Algorithm
DLQUALBAD DL Qual. Bad Trig TRIG Threshold BSC6900
During downlink power control, if the downlink receive quality level is equal to or greater than "DL Qual, bad Trig Threshold" , "DL RX_LEV Upper Threshold" is increased by "DL Qual. Bad UpLEVDiff " to further increase the expected SET downlink Enhanced GCELLPWR2(O power Power Control ptional) level. GBFD-110703 Algorithm
DLQUALBAD DL Qual. Bad UPLEV UpLEVDiff
BSC6900
During downlink power control, if the downlink receive quality level is equal to or greater than "DL Qual, bad Trig Threshold" , "DL RX_LEV Upper Threshold" is increased by "DL Qual. Bad UpLEVDiff " to further increase the expected SET downlink Enhanced GCELLPWR2(O power Power Control ptional) level. GBFD-110703 Algorithm
DL Qual. DLQUALIMIT Threshold
BSC6900
Downlink quality threshold for emergency handover. This parameter is represente d as the product of 10 and a quality level that ranges from 0 to 7. The emergency handover can be triggered only when the downlink receive quality of an MS is greater(indi cate bad HUAWEI I SET quality) Handover GCELLHOEMG( than this GBFD-110601 HUAWEI II Optional) threshold. GBFD-510501 Handover
DLQUALIMIT DL Qual. Limit for AMRFR AMR FR BSC6900
Downlink quality limit for emergency handover in an AMR full rate call. The value of this parameter correspond s to the quality levels (0 to 7) multiplied by 10. An emergency handover can be triggered only when the downlink reception quality of an MS is higher than the value AMR FR of this HUAWEI II SET parameter, GBFD-115501 Handover GCELLAMRQU which GBFD-510501 HUAWEI I L(Optional) indicates a GBFD-110601 Handover
DLQUALIMIT DL Qual. Limit for AMRHR AMR HR BSC6900
Downlink quality limit for emergency handover in an AMR half rate call. The value of this parameter correspond s to the quality levels (0 to 7) multiplied by 10. An emergency handover can be triggered only when the downlink reception quality of an MS is higher than the value AMR HR of this HUAWEI II SET parameter, GBFD-115502 Handover GCELLAMRQU which GBFD-510501 HUAWEI I L(Optional) indicates a GBFD-110601 Handover
DLREXLEVA DLRexLevAdjust DJFCTR Factor BSC6900
This parameter specifies the downlink signal strength factor multiplied by 10 during the calculation of the downlink power control step. The downlink signal strength factor is a coefficient indicating how much the signal strength is considered during the calculation of the downlink SET power HUAWEI III GCELLPWR3(O control Power Control ptional) step. GBFD-117601 Algorithm
DLREXLEVE DLRexLevExpon XPFLTLEN entFilterLen BSC6900
Length of the exponentia l filter for downlink signal strength. A single measurem ent report may not reflect the actual network situations accurately. Therefore, the BSC needs to filter the measured values in several successive measurem ent reports to reflect SET the radio HUAWEI III GCELLPWR3(O environme Power Control ptional) nt. GBFD-117601 Algorithm Upper receive level threshold for downlink power control. If the downlink receive level is greater than this threshold, the power of the downlink signal SET needs to HUAWEI III GCELLPWR3(O be Power Control ptional) decreased. GBFD-117601 Algorithm
DLREXLEVH DLRexLevHighTh IGHTHRED red BSC6900
DLREXLEVL DLRexLevLowthr OWTHRED ed BSC6900
Lower receive level threshold for downlink power control. If the downlink receive level is smaller than this threshold, the power of the uplink signal SET needs to HUAWEI III GCELLPWR3(O be Power Control ptional) increased. GBFD-117601 Algorithm Length of the slide window filter for downlink signal strength. A single measurem ent report may not reflect the actual network situations accurately. Therefore, the BSC needs to filter the measured values in several successive measurem ent reports to reflect SET the radio HUAWEI III GCELLPWR3(O environme Power Control ptional) nt. GBFD-117601 Algorithm
DLREXLEVS DLRexLevSlideW LDWINDOW indow BSC6900
DLREXQUAL DLRexQualAdjust ADJFCTR Factor BSC6900
This parameter specifies the downlink quality level factor multiplied by 10 during the calculation of the downlink power control step. The downlink quality level factor is a coefficient indicating how much the quality level is considered during the calculation of the downlink SET power HUAWEI III GCELLPWR3(O control Power Control ptional) step. GBFD-117601 Algorithm
DLREXQUAL DLRexQualExpon EXPFLTLEN entFilterLen BSC6900
Length of the exponentia l filter for downlink signal quality. A single measurem ent report may not reflect the actual network situations accurately. Therefore, the BSC needs to filter the measured values in several successive measurem ent reports to reflect SET the radio HUAWEI III GCELLPWR3(O environme Power Control ptional) nt. GBFD-117601 Algorithm
DLREXQUAL SLDWINDO DLRexQualSlide W Window
BSC6900
Length of the slide window filter for downlink signal quality. A single measurem ent report may not reflect the actual network situations accurately. Therefore, the BSC needs to filter the measured values in several successive measurem ent reports to reflect SET the radio HUAWEI III GCELLPWR3(O environme Power Control ptional) nt. GBFD-117601 Algorithm A power control step cannot exceed the step computed according to "III DL RexLev Protect Factor" and "III DL SET RexQual HUAWEI III GCELLPWR3(O Protect Power Control ptional) Factor". GBFD-117601 Algorithm
DLRXLEVPR OTECTFACT III DL RexLev OR Protect Factor
BSC6900
DLRXQUALP ROTECTFAC III DL RexQual TOR Protect Factor
BSC6900
DLSSHIGHT DL RX_LEV HRED Upper Threshold BSC6900
A power control step cannot exceed the step computed according to "III DL RexLev Protect Factor" and "III DL SET RexQual HUAWEI III GCELLPWR3(O Protect Power Control ptional) Factor". GBFD-117601 Algorithm Upper threshold for downlink signal strength If the downlink received signal level is greater than this threshold, a power decrease is computed. Then, the power is decreased by the least of the power decrease, maximum power adjustment step allowed by the quality zone to SET which the Enhanced GCELLPWRBA received Power Control SIC(Optional) signal GBFD-110703 Algorithm
DLSSLOWT DL RX_LEV HRED Lower Threshold BSC6900
Lower threshold for downlink signal strength If the downlink received signal level is less than this threshold, a power increase is computed. Then, the power is increased by the least of the power increase, "MAX Up Adj. PC Value by RX_LEV", and "MAX Up Adj. PC Value by Qual.". SET Power Enhanced GCELLPWRBA increase = Power Control SIC(Optional) ("DL GBFD-110703 Algorithm
Downlink TBF DLTBFESTD Establishment ELAY Delay
BSC6900
Time interval between sending of the Packet Uplink Ack/Nack message and setup of the DL TBF. After receiving the Packet Uplink Ack/Nack message (FAI = 1), the MS releases the UL TBF and starts to monitor CCCH. In this case, if the MS receives the downlink assignmen SET t message GCELLPRIVAT before EOPTPARA(Opt being Extended ional) handed GBFD-119203 Uplink TBF Public Voice Interval for Group Call resending Service SET downlink Public Voice GCELLGSMR(O test GBFD-510301 Broadcast ptional) messages GBFD-510302 Service
DLTESTRES Download Test ENDINT Resend Interval
BSC6900
DLTESTRES Download Test ENDNUM Resend Number
BSC6900
Number of times of the BSC6900 resending downlink test messages after the downlink test function is enabled. If the BSC6900 does not receive any response message from the MS at the preset interval, the BSC6900 releases the relevant Public Voice voice Group Call group call Service SET service Public Voice GCELLGSMR(O (VGCS) GBFD-510301 Broadcast ptional) channel. GBFD-510302 Service
DLTHF1
AMR DL Coding Rate adj.th1[F]
BSC6900
Adjustment threshold 1 of AMR downlink coding rate (full rate). According to a certain algorithm and the RQI in the call measurem ent report, the MS and the BTS automatica lly adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is SET the carrierGCELLCCAMR( toOptional) interferenc GBFD-115501 AMR FR
DLTHF2
BSC6900
Adjustment threshold 2 of AMR downlink coding rate (full rate). According to a certain algorithm and the RQI in the call measurem ent report, the MS and the BTS automatica lly adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is SET the carrierGCELLCCAMR( toOptional) interferenc GBFD-115501 AMR FR
DLTHF3
BSC6900
Adjustment threshold 3 of AMR downlink coding rate (full rate). The adjustment thresholds and the hysteresis of coding rate must meet the following conditions: AMR Coding Rate adj.th (n) < AMR Coding Rate adj.th (n + 1), n = 1 or 2; [AMR Coding Rate adj.th (n) + AMR Coding Rate adj.hyst SET (n)] < GCELLCCAMR( [AMR Optional) Coding GBFD-115501 AMR FR
DLTHH1
AMR DL Coding Rate adj.th1[H]
BSC6900
Adjustment threshold 1 of AMR downlink coding rate (half rate). According to a certain algorithm and the RQI in the call measurem ent report, the MS and the BTS automatica lly adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is SET the carrierGCELLCCAMR( toOptional) interferenc GBFD-115502 AMR HR
DLTHH2
BSC6900
DLTHH3
BSC6900
DLTHWB1
AMR DL Coding Rate adj.th1[WB] BSC6900
Adjustment threshold 1 of AMR downlink coding rate (wide band). According to a certain algorithm and the RQI in the call measurem ent report, the MS and the BTS automatica lly adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, SET which is GCELLCCAMR( the carrierOptional) toGBFD-115507 WB AMR
DLTHWB2
AMR DL Coding Rate adj.th2[WB] BSC6900
SET GCELLCCAMR( Optional) ADD BTSANTFEEDE RBRD(Optional) SET BTSANTFEEDE RCONNECT(Op tional) ADD BTSANTFEEDE RBRD(Optional) SET BTSANTFEEDE RCONNECT(Op tional)
DMDUA
Down MDU A
BSC6900
DMDUB
Down MDU B
BSC6900
Adjustment threshold 2 of AMR downlink coding rate (wide band). According to a certain algorithm and the RQI in the call measurem ent report, the MS and the BTS automatica lly adjust the current speech coding and decoding rate. The adjustment threshold of coding rate is the threshold of the RQI, which is the carriertoGBFD-115507 WB AMR MDU board number when the antenna pass of downlink tributary A is selected GBFD-111202 O&M of BTS MDU board number when the antenna pass of downlink tributary B is selected GBFD-111202 O&M of BTS
DN
Domain
BSC6900
Clock domain required by the slave side in the 1588V2 protocol. This parameter is valid when the SET 1588CLK Clock over IP BTSIPCLKPAR type is support A(Mandatory) configured. GBFD-118620 1588V2 Coding scheme of the default GPRS downlink. Dynamic adjustment coding: the coding scheme used during initial access transmissi on. If the downlink uses the fixed coding scheme, the TBF uses the SET fixed GCELLPSCS(O coding Coding ptional) scheme. GBFD-119106 Scheme
DNDEFAULT Downlink Default CS CS Type BSC6900
DNDEFAULT Downlink Default MCS MCS Type BSC6900
Default coding scheme of the downlink EDGE link. If the downlink adopts the dynamic adjustment coding scheme, this parameter can be used to set the coding scheme for transmissi on during initial access. If the downlink uses the fixed coding scheme, the TBF uses the SET fixed GCELLEGPRSP coding ARA(Optional) scheme.
GBFD-114201 GBFD-119106 GBFD-114201 GBFD-119106
EGPRS Coding Scheme EGPRS Coding Scheme
Downlink EGPRS2-A DNE2ADEFA Default MCS ULTMCS Type
BSC6900
Default coding scheme used on the downlink EGPRS2A link. If the downlink uses the dynamic coding scheme, this parameter specifies the coding scheme that is used for the transmissi on in initial access. If the downlink uses the fixed coding scheme, SET the TBF GCELLEGPRSP uses the Downlink ARA(Optional) fixed GBFD-510804 EGPRS2-A
Downlink DNE2AFIXM EGPRS2-A Fixed CS MCS Type BSC6900
Fixed coding scheme that is used on the downlink EGPRS2A link. If the downlink uses the fixed coding scheme, this parameter can be set MSC1-4, MSC7-8 or DAS5-12.. If the downlink uses the dynamic coding scheme, this SET parameter GCELLEGPRSP is set to Downlink ARA(Optional) UNFIXED. GBFD-510804 EGPRS2-A
DNFIXCS
Downlink Fixed CS Type
BSC6900
Adjustment mode of the downlink GPRS link coding scheme. If the fixed coding scheme is used, this parameter is set to a value ranging from CS1 to CS4. If the dynamic coding scheme is used, this SET parameter GCELLPSCS(O is set to ptional) UNFIXED.
GPRS Coding Scheme GPRS Coding Scheme
DNFIXMCS
Downlink Fixed MCS Type
BSC6900
Coding scheme of the downlink EDGE link. If the downlink uses the fixed coding scheme, this parameter is set to a value ranging from MCS1 to MCS9. If the downlink uses the dynamic adjustment coding scheme, this SET parameter GCELLEGPRSP is set to ARA(Optional) UNFIXED.
DNPCEN
DL PC Allowed
BSC6900
Enhanced Power Control Whether to Algorithm SET allow BTS HUAWEI III GCELLBASICP power GBFD-110703 Power Control ARA(Optional) control GBFD-117601 Algorithm
Short Message DNSENDSM Downlink DIS Disabled
BSC6900
Whether to prohibit sending point-topoint short messages. If necessary, this parameter is used for controlling whether to send downlink short messages from a specific cell so as to ensure sufficient radio channel SET resources GCELLCCAD(O for normal ptional) calls. GBFD-110203
Point To Point Short Message Service (TS21, TS22)
DNTBFRELD Release Delay of ELAY Downlink TBF BSC6900
Delay of releasing the downlink TBF. After the last downlink RLC data block is transmitted on the network side and all the transmitted downlink data blocks are received, the MS is not informed to stop this downlink TBF. Instead, the state of the last data block is forcibly SET set to "not GCELLPRIVAT received" EOPTPARA(Opt and the ional) RRBP flag GBFD-114101 GPRS
Downlink TBF DNTHDCSD Threshold from EGRADE1 CS2 to CS1
BSC6900
Retransmi ssion threshold when the coding mode of the downlink TBF is changed from CS2 to CS1. When the downlink TBF retransmis sion rate is greater than or equals to this value, the coding mode of the TBF is SET changed GCELLPSCS(O from CS2 Coding ptional) to CS1. GBFD-119106 Scheme Retransmi ssion threshold when the coding mode of the TBF is changed from CS3 to CS2. When the TBF retransmis sion rate is greater than or equals to this value, the coding mode of the TBF is SET changed GCELLPSCS(O from CS3 ptional) to CS2.
BSC6900
CS-3/CS-4 Coding Scheme CS-3/CS-4 Coding Scheme
BSC6900
Retransmi ssion threshold when the coding mode of the downlink TBF is changed from CS4 to CS3. When the downlink TBF Retransmi ssion rate is greater than or equals to this value, the coding mode of the TBF is SET changed GCELLPSCS(O from CS4 ptional) to CS3.
Downlink TBF DNTHDCSU Threshold from PGRADE1 CS1 to CS2
BSC6900
Retransmi ssion threshold when the coding mode of the downlink TBF is changed from CS1 to CS2. When the TBF retransmis sion rate is less than or equals to this value, the coding mode of the TBF is SET changed GCELLPSCS(O from CS1 Coding ptional) to CS2. GBFD-119106 Scheme
Downlink TBF DNTHDCSU Threshold from PGRADE2 CS2 to CS3
BSC6900
Retransmi ssion threshold when the coding mode of the TBF is changed from CS2 to CS3. When the downlink TBF retransmis sion rate is less than or equals to CS2 to CS1, the coding mode of the TBF is SET changed GCELLPSCS(O from CS2 ptional) to CS3.
Downlink TBF DNTHDCSU Threshold from PGRADE3 CS3 to CS4 Enable Door DOOR_ENGI Status Alarm NE_MASK Reporting
BSC6900
Retransmi ssion threshold when the coding mode of the downlink TBF is changed from CS3 to CS4. When the downlink TBF retransmis sion rate is less than or equals to this value, the coding mode of the downlink TBF is SET changed GCELLPSCS(O from CS3 ptional) to CS4. Door status alarm switch
BSC6900
ADD EMU(Optional)
DOUBLEANT Double Antenna ENNAGAIN Gain
BSC6900
Dualantenna gain used to estimate the downlink power SET during GCELLPWRBA assignmen Active Power SIC(Optional) t GBFD-117602 Control
DPC
DSP code[Whole Number] BSC6900
As an integer, the DSP code can be expressed by a decimal digit or a hexadecim al digit. If the DSP code is expressed A Interface by a Protocol hexadecim Process al digit, H' ADD is added STPSignalin N7DPC(Mandat before the GBFD-111804 g Transport ory) number. GBFD-111806 Point) DSP code expressed in the ADD format of A Interface N7DPC(Mandat segments Protocol ory) 8-8-8 GBFD-111804 Process As a key field for identifying the block of A interface CIC status, it indicates the DPC group index of the circuit ID of the A BLK interface to A Interface ACIC(Mandatory be Circuit ) blocked. GBFD-111803 Management Index of the DPC group. see "ADD GCNNOD A Interface ADD E" Circuit AE1T1(Optional) command. GBFD-111803 Management
DPCDNF
DSP code[Divided Number]
BSC6900
DPCGIDX
DPC Group Index BSC6900
DPCGIDX
DPCGIDX
Index of a DPC group. When multiple DPCs or one DPC serves as a logical entity, this logical entity is called a DPC group. When the MSC pool function is activated, the user plane resources on the A interface are shared among the MSCs in the pool, and thus load ADD balancing GCNNODE(Man is datory) achieved. GBFD-117401 MSC Pool
DPCT
DSP type
BSC6900
DSP type. STP: indicates the signaling transfer point. A: indicates the signaling point of the A interface control signaling plane. IUR_G: indicates the signaling point of the base station controller that is connected to the BSC. A Interface LB: Protocol indicates Process the ADD signaling STPSignalin N7DPC(Mandat point of the GBFD-111804 g Transport ory) LB GBFD-111806 Point) ADD N7DPC(Mandat ory) ADD MTP3RT(Manda tory) ADD MTP3LKS(Mand atory) ADD M3DE(Mandator y) ADD GCNNODE(Man datory) ADD GEXTSMLC(Ma ndatory)
DPX
DSP index
BSC6900
A Interface The DSP Protocol index Process uniquely GBFD-111804 A over IP identifies a GBFD-118602 A IP over DSP. GBFD-118622 E1/T1
DPX
DPX
BSC6900
Iur-g DPC ADD index of a GNRNC(Mandat neighborin MBSC Load ory) g RNC MRFD-211402 Balancing Maximum signal level difference between the neighbor cell and the serving cell for HUAWEI I ADD triggering Handover G2GNCELL(Opti directed GBFD-110601 HUAWEI II onal) retry GBFD-510501 Handover
Directed Retry DRHOLEVR Handover Level ANGE Range
BSC6900
DROPCTRL ABISCONNF Drop Optimize AIL ABIS Link Failure BSC6900
Whether to optimize the call drops resulting from Abis territorial link fault. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought SET into the GCELLSOFT(O statistics of ptional) call drops. GBFD-111004
DROPCTRL Drop Optimize CONNFAILH Conn Fail[HO OACCFAIL access fail]
BSC6900
Whether to optimize the call drops resulting from connection failure (handover access failure). The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought SET into the GCELLSOFT(O statistics of ptional) call drops. GBFD-111004
DROPCTRL Drop Optimize CONNFAILO Conn Fail[OM M intervention]
BSC6900
Whether to optimize the call drops resulting from connection failure, operation and maintenan ce (OM) interventio n. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought SET into the GCELLSOFT(O statistics of ptional) call drops. GBFD-111004
DROPCTRL CONNFAILO Drop Optimize THER Conn Fail[other]
BSC6900
Whether to optimize the call drops resulting from a connection failure except for handover access failure, OM interventio n, radio link failure, and unavailabili ty of radio resources. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting SET from this GCELLSOFT(O cause are ptional) not brought GBFD-111004
DROPCTRL Drop Optimize CONNFAILR Conn Fail[radio LFAIL link fail]
BSC6900
Whether to optimize the call drops resulting from connection failure (radio link failure). The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought SET into the GCELLSOFT(O statistics of ptional) call drops. GBFD-111004
Drop Optimize DROPCTRL Conn CONNFAILR Fail[resource not RNOTAVL available] BSC6900
Whether to optimize the call drops resulting from connection failure (unavailabi lity of radio resources). The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought SET into the GCELLSOFT(O statistics of ptional) call drops. GBFD-111004
DROPCTRL EQUIPFAIL
Drop Optimize Equipment Failure
BSC6900
Whether to optimize the call drops resulting from equipment fault. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought SET into the GCELLSOFT(O statistics of ptional) call drops. GBFD-111004
DROPCTRL Drop Optimize Err ERRINDDMR Ind[unsolicited SP DM response] BSC6900
Whether to optimize the call drops resulting from error indication (unsolicite d DM response). The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought SET into the GCELLSOFT(O statistics of ptional) call drops. GBFD-111004
DROPCTRL Drop Optimize Err ERRINDSEQ Ind[sequence ERR error] BSC6900
Whether to optimize the call drops resulting from error indication (sequence error). The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought SET into the GCELLSOFT(O statistics of ptional) call drops. GBFD-111004
DROPCTRL Drop Optimize Err ERRINDT200 Ind[T200 timeout] BSC6900
Whether to optimize the call drops resulting from error indication (T200 timeout). The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought SET into the GCELLSOFT(O statistics of ptional) call drops. GBFD-111004
Drop Optimize DROPCTRLF Forced Handover ORCHOFAIL Failure BSC6900
Whether to optimize the call drops resulting from forced handover failure. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought SET into the GCELLSOFT(O statistics of ptional) call drops. GBFD-111004
Drop Optimize Into-BSC DROPCTRLI Handover NBSCHO Timeout
BSC6900
Whether to optimize the call drops resulting from incomingBSC handover timeout. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought SET into the GCELLSOFT(O statistics of ptional) call drops. GBFD-111004
Drop Optimize DROPCTRLI Intra-BSC NTRABSCO Handover UTHO Timeout
BSC6900
Whether to optimize the call drops resulting from outgoing internal inter-cell handover timeout. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought SET into the GCELLSOFT(O statistics of ptional) call drops. GBFD-111004
Drop Optimize DROPCTRLI Intra-Cell NTRACELLH Handover O Timeout
BSC6900
Whether to optimize the call drops resulting from intracell handover timeout. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought SET into the GCELLSOFT(O statistics of ptional) call drops. GBFD-111004
DROPCTRL NOMR
Drop Optimize No MR for Long Time BSC6900
Whether to optimize the call drops resulting from no MS measurem ent reports for a long time. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought SET into the GCELLSOFT(O statistics of ptional) call drops. GBFD-111004
Drop Optimize DROPCTRL Out-BSC OUTBSCHO Handover T8 Timeout
BSC6900
Whether to optimize the call drops resulting from outgoingBSC handover timeout. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought SET into the GCELLSOFT(O statistics of ptional) call drops. GBFD-111004
DROPCTRL RELIND
Drop Optimize Release Indication
BSC6900
Whether to optimize the call drops resulting from release indications. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought SET into the GCELLSOFT(O statistics of ptional) call drops. GBFD-111004
DROPCTRL RESCHK
Drop Optimize Resource Check
BSC6900
DROPPKTT HD0
Packet discard threshold of queue 0 [ms]
BSC6900
Whether to optimize the call drops resulting from resource check. The value 0 means "optimize" and 1 means "not optimize". If the value of this parameter is 0, the call drops resulting from this cause are not brought Radio SET into the Dedicated GCELLSOFT(O statistics of Channel ptional) call drops. GBFD-111004 Management If the duration for buffering the data in queue 0 is more than or equals to the value of this parameter, the subsequen t packets ADD added to PORTFLOWCT queue 0 RLPARA(Option are al) discarded. None None
DROPPKTT HD1
BSC6900
DROPPKTT HD2
BSC6900
If the duration for buffering the data in queue 1 is more than or equals to the value of this parameter, the subsequen t packets 2G/3G Coadded to Transmission queue 1 Resources are Management discarded. MRFD-211503 on MBSC If the duration for buffering the data in queue 2 is more than or equals to the value of this parameter, the subsequen t packets 2G/3G Coadded to Transmission queue 2 Resources are Management discarded. MRFD-211503 on MBSC
DROPPKTT HD3
BSC6900
DROPPKTT HD4
BSC6900
If the duration for buffering the data in queue 3 is more than or equals to the value of this parameter, the subsequen t packets 2G/3G Coadded to Transmission queue 3 Resources are Management discarded. MRFD-211503 on MBSC If the duration for buffering the data in queue 4 is more than or equals to the value of this parameter, the subsequen t packets 2G/3G Coadded to Transmission queue 4 Resources are Management discarded. MRFD-211503 on MBSC
DROPPKTT HD5
BSC6900
If the duration for buffering the data in queue 5 is more than or equals to the value of this parameter, the subsequen t packets ADD added to PORTFLOWCT queue 5 RLPARA(Option are al) discarded. MRFD-211503
DROPPWRI Drop Power Time NTERVAL Interval[T3] BSC6900
This parameter specifies the interval at which the power SET of a TRX is BTSBAKPWR(O continually Active Backup ptional) decreased. GBFD-111605 Power Control This parameter specifies the delay time before decreasing SET the power BTSBAKPWR(O of the Active Backup ptional) TRXs. GBFD-111605 Power Control This parameter specifies the step by which the power of a SET TRX is BTSBAKPWR(O decreased Active Backup ptional) at a time. GBFD-111605 Power Control
DROPPWRS Drop Power Start TARTTIME Time[T1] BSC6900
DROPPWRS TEP Drop Power Step BSC6900
DRXEN
SMCBC DRX
BSC6900
Whether to support the discontinu ous reception mechanis m (DRX). To reduce the power consumpti on, the DRX is introduced into the GSM Specificati on. MSs supporting the DRX can consume less power to receive interested broadcast messages. This prolongs the service time of MS batteries. SET BSCs GCELLOTHEXT supporting Simplified Cell (Optional) the DRX GBFD-113602 Broadcast
DRXTIMERM Max. Duration of AX DRX
BSC6900
Duration of the timer for entering the DRX mode. DRX is the parameter in the cell broadcast message. It indicates noncontinuous receiving mode. When the MS is switched from the packet transmissi on mode to the idle mode, the MS needs to maintain the none DRX mode for a moment. SET After the Discontinuous GCELLPSBASE TBF is Reception (Optional) released, GBFD-114802 (DRX)
DRYSET
Dehumidification Equipment BSC6900
Whether to start the dehumidifi cation equipment of the BTS. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSOUTPUT(O in another ptional) mode. GBFD-111202 O&M of BTS Number of the E1T1 ADD port for PPPLNK(Option bearing the al) PPP link None
DS1
E1T1 port No.
BSC6900
None
DS1
E1T1 port No.
BSC6900
Number of the E1T1 Abis IP over ADD port for E1/T1 MPLNK(Optional bearing the GBFD-118611 A IP over ) PPP link GBFD-118622 E1/T1
DSCP
Differentiated Service Codepoint
BSC6900
The DSCP is a field of the IP data packet. It is used to assign the differentiat ed service to the communic ation networks. The DSCP code is used to label each data packet on the network and allocate the correspond ing service levels. In the same network ADD environme SCTPLNK(Optio nt, the nal) larger the SET DSCP is, PHBMAP(Mand the higher atory) the priority GBFD-118602 A over IP Service code of the PING command, used to Abis IP over identify the E1/T1 PING GBFD-118611 A IP over command GBFD-118622 E1/T1
DSCP
Differentiated services code point
BSC6900
PING IP(Optional)
DSCP
Differentiated Service Codepoint
BSC6900
Differentiat ed service code is used to identify the Abis IP over SET service E1/T1 DSCPMAP(Man priority of GBFD-118611 A IP over datory) the user. GBFD-118622 E1/T1
DSCP
DSCP
BSC6900
DSCP to be contained in the header of an IP packet. According to this parameter, the router provides differentiat ed services for packet streams. If this parameter is greater, the service level is higher. This parameter SET is valid BTSVLAN(Optio only when nal) the IMP transport BTSVLAN(Optio type is set nal) to IP. GBFD-118605 IP QOS
DSPKIFFOF DSP Kickoff FTIMER Timer
BSC6900
Duration for recovering all the DSPs. This timer is started when the first DSP is recovered. When all the DSPs of the local subrack are recovered or the timer expires, the timer is stopped. The cells are distributed SET on the BSCPSSOFTPA recovered RA(Optional) DSPs. GBFD-114101 GPRS Number of the DSP. If you do not specify this parameter, DLD all DSPs TCFILE(Mandat are Configuration ory) specified. MRFD-210301 Management Meanings: DSP No. Value range:0~2 1 Content:no ne Recomme nded SET value(defa TCTYPE(Option ult Configuration al) value):non MRFD-210301 Management Number of the DSP ADD where the OBJALMSHLD( alarm is Faulty Mandatory) generated MRFD-210304 Management
DSPN
DSP No.
BSC6900
DSPN
DSP No.
BSC6900
DSPN
DSP No.
BSC6900
DSPN
DSP No.
BSC6900
DSPNO
DSP No.
BSC6900
SET TCPLYVOICE(M andatory) SET TCPARA(Option al) SET PSCELLTODSP (Mandatory)
DSPRECOV DSP Recover ERTIMER Timer
BSC6900
Number of the DSP in the DPU Configuration board MRFD-210301 Management Target DSP number GBFD-114101 GPRS This parameter specifies the value of the timer set to wait the fault recovery before the cell redistributi on on the DSP. When a fault is detected on a DSP, this timer starts. If the fault is recovered before the timer expires, the cells on the DSP are not be redistribute d. Otherwise, SET the cell BSCPSSOFTPA redistributi RA(Optional) on is GBFD-114101 GPRS Whether Support of daylight Daylight saving Saving Time time has to GBFD-116101 Configuration be used MRFD-210301 Management
DST
DaylightSave
BSC6900
SET TZ(Optional)
DSTF
Destination File Name
BSC6900
Name of ULD the BTSDEVFILE(M destination andatory) file GBFD-111202 O&M of BTS
DSTIP
BSC6900
ADD IPRT(Mandatory Destination ) IP address None
None
DSTIP
Destination IP Address
BSC6900
Destination ADD IP address IP Fault BTSBFD(Manda of BFD Detection tory) Session. GBFD-118609 Based on BFD ADD BTSIPRT(Mand atory) ADD BTSIPRTBIND( Mandatory) IMP BTSIPRT(Mand Destination atory) IP address GBFD-118601 Abis over IP ADD IPRT(Mandatory Subnet ) mask ADD BTSIPRT(Mand atory) ADD BTSIPRTBIND( Mandatory) IMP BTSIPRT(Mand atory) ADD TSCROSS(Man datory)
DSTIP
Destination IP Address
BSC6900
DSTMASK
Destination address mask
BSC6900
None
None
DSTMASK
Destination Address Mask
BSC6900
DSTPORTN Destination port O No.
BSC6900
Subnet mask of BTS Route. GBFD-118601 Abis over IP Destination of timeslot cross None None
Destination DSTTSMASK timeslot mask
BSC6900
ADD Target TSCROSS(Man timeslot datory) mask
None
None
Directed Retry DTLOADTHR Load Access ED Threshold
BSC6900
Threshold of the load in the target cell for the directed retry. Only a cell whose load is lower than or equal to this threshold can be selected SET as a GCELLCCBASI candicate C(Optional) target cell. Type of the GBFD-110607 Direct Retry DRX supporting the VGCS service. An MS reads the NCH only when a new notification message of group call arrives. This helps save power of the MS. This parameter is mandatory SET for a Public Voice GCELLGSMR(O SAGEM Group Call ptional) MS. GBFD-510301 Service Downlink TRX index ADD number of BTSANTFEEDE the newly RBRD(Mandator added y) board GBFD-111202 O&M of BTS SET BTSANTFEEDE RCONNECT(Op tional) Index number of the downlink tributary GBFD-111202 O&M of BTS
DTRTYPE
DRX Type
BSC6900
DTRX
Down Link No.
BSC6900
DTRX
Down Link No.
BSC6900
DTRXPN
Down TRX Board Pass No. BSC6900
TRX board pass number connected ADD with the BTSANTFEEDE downlink RBRD(Optional) tributary GBFD-111202 O&M of BTS TRX board pass number SET connected BTSANTFEEDE with the RCONNECT(Op downlink tional) tributary GBFD-111202 O&M of BTS Number of the slot where the TRX board that ADD connects BTSANTFEEDE to downlink RBRD(Mandator tributary is y) located GBFD-111202 O&M of BTS Number of the slot where the TRX board that SET connects BTSANTFEEDE to downlink RCONNECT(Op tributary is tional) located GBFD-111202 O&M of BTS Number of the subrack where the TRX board that ADD connects BTSANTFEEDE to downlink RBRD(Mandator tributary is y) located GBFD-111202 O&M of BTS Number of the subrack where the TRX board that SET connects BTSANTFEEDE to downlink RCONNECT(Op tributary is tional) located GBFD-111202 O&M of BTS
DTRXPN
Down TRX Board Pass No. BSC6900
DTRXSN
Down TRX Slot No.
BSC6900
DTRXSN
Down TRX Slot No.
BSC6900
DTRXSRN
Down TRX Subrack No.
BSC6900
DTRXSRN
Down TRX Subrack No.
BSC6900
Dummy Bit DUMMYBITR Randomization ANDSWITCH Switch
BSC6900
Whether a BTS randomize s the dummy bits in all the signaling messages that the BTS sends to an MS. That is, dummy bits are randomize d rather than filled SET on the GCELLSOFT(O basis of ptional) 0x2B. GBFD-113521
A5/1 Encryption Flow Optimization
DUPLEX
Duplex Mode
BSC6900
The duplex mode of FE port is SET duplex or BTSETHPORT( halfOptional) duplex. GBFD-118601 Abis over IP Duration STR for starting BTSTST(Manda the BTS BTS Test tory) test GBFD-111207 Function Duration for starting the TRX STR idle TRXBURSTTST timeslot BTS Test (Mandatory) test GBFD-111207 Function Duration STR for starting BTSTST(Manda the BTS BTS Test tory) test GBFD-111207 Function Duration for starting the TRX STR idle BTSTST(Manda timeslot BTS Test tory) test GBFD-111207 Function
DURATH
Duration<Hour>
BSC6900
DURATH
Duration Hour
BSC6900
DURATM
Duration<minute> BSC6900
DURATS
Duration<s>
BSC6900
Downlink Multiplex Threshold of DWNDYNCH Dynamic Channel NTRANLEV Conversion BSC6900
Downlink multiplex threshold of dynamic channel conversion . When the subscriber number on the channel reaches the value (threshold/ 10), the dynamic channel conversion is triggered. We recomman d that the value of "Downlink Multiplex Threshold of Dynamic Channel Conversio n" should SET be less GCELLPSCHM( than Optional) "PDCH
GBFD-114101 GBFD-113101 GBFD-119303 GBFD-119501 GBFD-114101 GBFD-113101 GBFD-119303 GBFD-119501
GPRS PDCH Dynamic Adjustment Load Sharing Adaptive Adjustment of Uplink and Downlink Channels GPRS PDCH Dynamic Adjustment Load Sharing Adaptive Adjustment of Uplink and Downlink Channels
DWNINTEN
DL Signal Strength Limit
BSC6900
An MS can be used to test the Um interface software synchroniz ation only when the DL signal strength after the power control compensat ion in the test cell and the observed ADD cell is SoftAISSCFG(Optio higher than Synchronized nal) this limit. GBFD-118201 Network Number of a DXX. It is unique in one BSC6900 and ADD uniquely BTSCONNECT( identifies a Mandatory) DXX. GBFD-111202 O&M of BTS ADD DXX(Mandatory) ADD DXXCONNECT( Mandatory) ADD DXXTSEXGREL ATION(Mandato ry) Number of a DXX. It is unique in one BSC6900 and uniquely identifies a DXX. GBFD-111203 O&M of BSC
DXXINDEX
Up DXX Index
BSC6900
DXXINDEX
DXX Index
BSC6900
DXXPN
Up DXX Port No. BSC6900
ADD Number of BTSCONNECT( the upper Mandatory) DXX port GBFD-111202 O&M of BTS
Timer of DYNCHFRE Releasing Idle ETM Dynamic Channel BSC6900
Time to wait for releasing the dynamic channel after the TBF on the dynamic channel is released. When all the TBFs on the channel are released, the dynamic channel is not released at once. Instead, the timer is started when the channels are idle. Before the timer SET expires, if PDCH GCELLPSCHM( new Dynamic Optional) service GBFD-113101 Adjustment
Level of DYNCHNPR Preempting EEMPTLEV Dynamic Channel BSC6900
Mode of preempting the dynamic channel for the CS domain and PS domain. Only the channel configured in the TCH/F mode can be preempted. "Preempt all dynamic TCHFs" indicates the circuit domain can preempt all the dynamic channels. "No preempt of CCHs" SET indicates GCELLPSCHM( the circuit Optional) domain Number of full-rate TCHs reserved for the CS domain. This parameter is valid only when "Level of Preemptin g Dynamic Channel" SET is set to GCELLPSCHM( LEVEL1 or Optional) LEVEL2.
Reservation Threshold of DYNCHTRA Dynamic Channel NRESLEV Conversion BSC6900
GPRS PDCH Dynamic Adjustment GPRS PDCH Dynamic Adjustment
DYNOpenTrx Allow Dynamic Power Shutdown of TRX BSC6900
This parameter specifies whether to allow the BSC6900 to enable the TRX Intelligent SET Shutdown GCELLBASICP feature on ARA(Optional) a cell. GBFD-111602
Dynamic DYNPBTSUP Transmission Div PORTED Supported BSC6900
Whether to enable the cell to support dynamic transmit SET diversity or Dynamic GCELLCHMGB dynamic Transmit ASIC(Optional) PBT GBFD-118101 Diversity Duration STR for the test TRANSPERFTS in E1 T(Mandatory) mode GBFD-111202 O&M of BTS Number of the E1 port. For the BTS3012, BTS3012A E, BTS3012 II and the UTRP board in SingleRAN BTSs, the number can be a value from 0 to 7. For other BTSs, the number STR can be a TRANSPERFTS value from T(Mandatory) 0 to 3. GBFD-111202 O&M of BTS
E1DURAT
Duration
BSC6900
E1PORT
Port No.
BSC6900
E1PORTNOI NBTSCONB E1 Port No SC Connect To BSC BSC6900
Number of the E1 port ADD on the BTS BTSABISHDLC connected Abis PATH(Mandator to the Transmission y) BSC. GBFD-118401 Optimization
Transmission E1SLCTTMU Board Type
BSC6900
STR Type of the TRANSPERFTS transmissi BTS Test T(Mandatory) on board GBFD-111207 Function
E1T1PN
E1/T1 port No.
BSC6900
SET COPTLNK(Optio E1/T1 port nal) number None
None
E1T1PN
E1/T1 Port No.
BSC6900
Number of the E1/T1 port from which the BTS extracts the transport clock. This parameter is valid only when the clock type is set SET to BTSCLK(Manda IP_TRANS BTS/NodeB tory) FER. MRFD-210501 Clock
E1T1PORTN Backboard E1/T1 O Port No. BSC6900
Number of the port extended by the backboard TOP communic ation mechanis m of the BTS. The TOP relation can be configured between the port on the BTS board panel and the port on the BTS backplane, thus extending the ports. This function is used for the configurati ADD on of the BTSTOPCONFI multi-mode G(Mandatory) base MRFD-211501
IP-Based 2G/3G CoTransmission on Base Station Side
E1T1TYPE
E1/T1 Type
BSC6900
Type of the E1/T1 from which the BTS extracts the transport clock. This parameter is valid only when the clock type is set SET to BTSCLK(Manda IP_TRANS BTS/NodeB tory) FER. MRFD-210501 Clock
ECHOIP
Check IP address BSC6900
Peer IP address to be checked. The input address (CHKIPAD DR) must be the address (regardless of the network segment address or host address of the peer address) in the network segment specified by the (PEERIPA ADD DDR, IPPATH(Mandat PEERMAS ory) K). GBFD-118605 IP QOS
ECNOOFF
Ec/No Offset
BSC6900
As a performan ce counter for 3G cells, Ec/No indicates the ratio of the energy per received chip to the spectral noise power density. If the Ec/No of a 3G neighbor cell is greater than "HOECNO TH3G" plus this parameter, the neighbor cell is listed in ADD the G3GNCELL(Opti candidate GSM/WCDMA onal) cell queue. GBFD-114301 Interoperability Threshold for determinin g the layer of the 3G neighbor cell. If the Ec/No of the 3G neighbor cell is less than this threshold, the neighbor cell is set to the ADD lowest GEXT3GCELL( layer (layer GSM/WCDMA Optional) 5). GBFD-114301 Interoperability
Ec/No Threshold ECNOTHRE for Layer Of 3G S Cell BSC6900
ECSC
ECSC
BSC6900
The early classmark sending control (ECSC) parameter specifies whether the MSs in a cell use early classmark sending. After a successful immediate assignmen t, the MS sends additional classmark information to the network as early as possible. The additional classmark information mainly SET contains System GCELLCCBASI the CM3 Information C(Optional) (classmark GBFD-111101 Sending EXP ALMLOG(Option al) STA ALMLOG(Option al)
ECSN
End Serial No.
BSC6900
End serial number of the alarm Faulty record MRFD-210304 Management
ED
End Date
BSC6900
Date when the ADD scheduled SUBTSK(Option task is al) stopped GBFD-111203 O&M of BSC End date of the alarm record. By default, the EXP end date is ALMLOG(Option 2037-12Faulty al) 31. MRFD-210304 Management
ED
End Date
BSC6900
ED
End Date
BSC6900
EDATE
End Date
BSC6900
End date of the alarm record. By default, the STA end date is ALMLOG(Option 2037-12Faulty al) 31. MRFD-210304 Management STR BTSLOG(Option al) End date GBFD-111202 O&M of BTS
EDAY
End date
BSC6900
SET TZ(Mandatory)
End date of the daylight saving time
Support of Daylight Saving Time GBFD-116101 Configuration MRFD-210301 Management
EDBLASTTI ME
Number of Satisfactory Measurements
BSC6900
According to the P/N rule, if the conditions for the handover between the subcells of an enhanced dualfrequency network are met during P of N measurem ents, the handover is triggered. This parameter SET specifies GCELLHOEDB the number Enhanced DualPARA(Optional) P. GBFD-114402 Band Network According to the P/N rule, if the conditions for the handover between the subcells of an enhanced dualfrequency network are met during P of N measurem ents, the handover is triggered. This parameter SET specifies GCELLHOEDB the number Enhanced DualPARA(Optional) N. GBFD-114402 Band Network
EDBSTATTI Total Number of ME Measurements
BSC6900
Subcell HO EDBSYSFLO Allowed Flow WLEV Control Level
BSC6900
If the current system flow control level is greater than this parameter, the handover between the underlaid and overlaid subcells due to low or high load in the underlaid subcell is not allowed. System flux thresholds correspond to the system flux obtained based on SET message GCELLHOEDB packets, Enhanced DualPARA(Optional) CPU load, GBFD-114402 Band Network Whether the current SET cell GCELLGPRS(O supports ptional) EDGE GBFD-114201 EGPRS
EDGE
EDGE
BSC6900
EDGEADJLA Edge HO AdjCell STTIME Valid Time BSC6900
According to the P/N rule, if a neighbor cell meets the conditions for selecting the neighbor cell for edge handover in P of N measurem ent reports, the edge handover to the neighbor cell is triggered. This parameter ADD specifies G2GNCELL(Opti the number HUAWEI II onal) P. GBFD-510501 Handover
EDGEADJST Edge HO AdjCell ATTIME Watch Time BSC6900
According to the P/N rule, if a neighbor cell meets the conditions for selecting the neighbor cell for edge handover in P of N measurem ent reports, the edge handover to the neighbor cell is triggered. This parameter ADD specifies G2GNCELL(Opti the number HUAWEI II onal) N. GBFD-510501 Handover According to the P/N rule, if the conditions for edge handover are met in P of N measurem ent reports, the handover is triggered. This parameter SET specifies GCELLHOBASI the number HUAWEI II C(Optional) P. GBFD-510501 Handover
EDGELAST
Handover Algorithm II Edge HO Valid Time BSC6900
Handover Algorithm I Edge EDGELAST1 HO Valid Time
BSC6900
According to the P/N rule, if the conditions for edge handover are met for P seconds within N seconds, the handover is triggered. This parameter SET specifies GCELLHOBASI the number HUAWEI I C(Optional) P. GBFD-110601 Handover According to the P/N rule, if the conditions for edge handover are met in P of N measurem ent reports, the handover is triggered. This parameter SET specifies GCELLHOBASI the number HUAWEI II C(Optional) N. GBFD-510501 Handover
EDGESTAT
Handover Algorithm II Edge HO Watch Time BSC6900
Handover Algorithm I Edge EDGESTAT1 HO Watch Time
BSC6900
According to the P/N rule, if the conditions for edge handover are met for P seconds within N seconds, the handover is triggered. This parameter SET specifies GCELLHOBASI the number HUAWEI I C(Optional) N. GBFD-110601 Handover Effect Immediatel SET y BTSLOADCTRL Flag(reser (Mandatory) ve) GBFD-111202 O&M of BTS Whether to support the 11-bit SET EGPRS GCELLPSBASE access 11-Bit EGPRS (Optional) request GBFD-119201 Access Whether the current cell Uplink SET supports EGPRS2-A GCELLGPRS(O EGPRS2- GBFD-510803 Downlink ptional) A GBFD-510804 EGPRS2-A
EFTIMMFLA Effect G Immediately Flag BSC6900
EGPRS11BI Support 11BIT TCHANREQ EGPRS Access
BSC6900
EGPRS2A
EGPRS2-A
BSC6900
EGPRSBEPL EDGE 8PSK IMIT8PSK Quality Threshold BSC6900
Used for EDGE 8PSK transmissi on quality statistics. If MEAN_BE P is less than or equals to this threshold, the transmissi on quality is regarded to be deteriorate d. MEAN_BE P indicates the average error code rate in one SET measurem GCELLNC2PAR ent report A(Optional) period. GBFD-116201
EGPRSBEPL EDGE GMSK IMITGMSK Quality Threshold BSC6900
Used for EDGE GMSK transmissi on quality statistics. If MEAN_BE P is less than or equals to this threshold, the transmissi on quality is regarded deteriorate d. MEAN_BE P indicates the average error code rate in one SET measurem GCELLNC2PAR ent report A(Optional) period. GBFD-116201
EM
EndType
BSC6900
SET TZ(Mandatory)
Type of the end date. "WEEK" indicates that the end date is a weekday. "DATE" indicates that the end date is a month day. "DATEWE EK" indicates the end date is expressed by a combinatio Support of n of Daylight weekday Saving Time and month GBFD-116101 Configuration day. MRFD-210301 Management
EMCPRILV
Priority of Emergency Call
BSC6900
Priority level of an emergency call. If this parameter is set to 15, the functions of reserving TCHs for emergency calls and preempting TCHs are not enabled. If the two functions need to be enabled, set this parameter to a value from 1 to 14. If the value of "Emergenc y Call Emergency Preemptio Call Service n (TS12) SET Permitted" Guaranteed GCELLCCAD(O is ON, this GBFD-110202 Emergency ptional) parameter GBFD-110521 Call
EMERGENC Emergency Y verification
BSC6900
Whether to verify the centralized signaling link in the case of the link establishm ent. ON: emergency verification , that is, the verification is not required. OFF: non emergency verification , that is, the verification is required during the establishm ent of a signaling link in a link set. Through verification ADD , the stable A Interface MTP3LKS(Optio operation Protocol nal) state of a GBFD-111804 Process
EMITTHD
Error emit threshold
BSC6900
ADD MPGRP(Optiona Error emit l) threshold.
None
None
EMLDSCP
EML DSCP
BSC6900
SET BSCABISPRIM AP(Optional)
Differentiat ed service Abis IP over code of the E1/T1 specified GBFD-118611 A IP over EML GBFD-118622 E1/T1
EMLPPEN
Allow EMLPP
BSC6900
Whether to allow the function of enhanced multi-level precedenc e and preemption (eMLPP). With the eMLPP function enabled, the network can use different policies such as queuing, preemption , or directed retry based on the priorities of different calls when network resources are SET occupied. GCELLCCBASI If this C(Optional) parameter GBFD-115001
EMLPPPRIO RITY eMLPP Priority
BSC6900
Indicating whether the eMLPP function is enabled in a cell and indicating the eMLPP priority of the cell. From high to low, the priorities are A, B, 0, 1, 2, 3, 4 and No SET Priority. No GCELLGSMR(O Priority is Group Call ptional) the lowest. GBFD-510307 EMLPP
EMLPPPRIO eMLPP Priority In RITY Paging BSC6900
Whether to include the eMLPP Priority information element in the Paging Command message over the Abis interface when "Allow eMLPP" is set to YES and the eMLPP flag in the Bitmap information element of the Paging message received from the MSC is 1 GBFD-115001 Service priority of the specified EML
EMLPRI
EML Priority
BSC6900
EMLSP
EML Service PRI BSC6900
Service priority of the extension maintenan ce link SET (EML).0 is BSCSRVPRI(Op the highest tional) priority. GBFD-118605 IP QOS SET BSCABISPRIM AP(Optional) Specified EML Vlan Id
EMLVLANID EML VlanId
BSC6900
EMONTH
End month
BSC6900
SET TZ(Mandatory)
Support of Daylight Month on Saving Time which DST GBFD-116101 Configuration ends MRFD-210301 Management
EMSIP
EMS IP Address
BSC6900
IP address ADD of the NE EMSIP(Mandato manageme ry) nt system GBFD-111202 O&M of BTS
ENABLE
Fallback Function Enable BSC6900
Whether to enable the SET fallback Group Call BTSFALLBACK( function for Reliability Optional) the BTS GBFD-510309 Enhancing Whether to enable the SET power BTSTMA(Manda supply of tory) the TMA GBFD-111202 O&M of BTS
ENABLED
TMA Power Supply Enabled
BSC6900
ENCRY
Encryption Algorithm
BSC6900
Encryption A5/1 and A5/2 algorithm Ciphering SET supported Algorithm GCELLBASICP by the BSS GBFD-113501 A5/3 Ciphering ARA(Optional) side GBFD-113503 Algorithm
ENCRYMOD Transport E Encrypted Mode
BSC6900
Encryption mode used when the NE serves as the FTP client AUTO: indicating that the FTP client automatica lly selects the encryption mode PLAINTEX T: indicating that the plain text mode is used forcibly. ENCRYPT ED: indicating that the encrypted SET mode is FTPSSRV(Optio used nal) forcibly. GBFD-111203 O&M of BSC
ENCRYMOD The Encrypted E Mode
BSC6900
Encryption mode supported when the NE serves as the FTP server AUTO: indicating that the FTP client automatica lly selects the encryption mode PLAINTEX T: indicating that the plain text mode is used forcibly. ENCRYPT ED: indicating that the encrypted SET mode is FTPSCLT(Optio used nal) forcibly. GBFD-111203 O&M of BSC
Support End-toEnd2EndTrac end User Tracing eState Function BSC6900
SET OTHSOFTPAR A(Optional) EXP ALMLOG(Option al) STA ALMLOG(Option al)
Whether to enable endto-end user tracing for the BSC. If this parameter is set to YES, the BSC starts end-to-end user tracing after the BSC receives the MSC Invoke Trace or BSS Invoke Trace message End-to-End MS from the Signaling MSC. GBFD-116401 Tracing
ENDAID
End Alarm ID
BSC6900
End number of the alarm Faulty record MRFD-210304 Management
ENDCIC
End CIC
BSC6900
It indicates the end CIC of the A interface CIC segment. When operation mode is set to OPC index, DPC group index, BSC ID, or CIC, the BLK parameter A Interface ACIC(Mandatory is Circuit ) mandatory. GBFD-111803 Management It indicates the end CIC of the Pb interface CIC segment. If the search object mode is set to search by the specified range, the BLK parameter PBCIC(Mandato is ry) mandatory. GBFD-111203 O&M of BSC
ENDCIC
End CIC
BSC6900
EndDayDST Prohibit Power PA Saving End Day
BSC6900
This parameter specifies the end date of a period during which the TRX Intelligent ADD Shutdown BSCDSTPADAT feature is E(Mandatory) disabled. GBFD-111602
ENDHEATTE Heater Shutdown MP Temperature BSC6900
If the ambient temperatur e reaches the value of this parameter, the heater is shut down. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDHEUBP(O in another ptional) mode. GBFD-111202 O&M of BTS This parameter specifies the end month of a period during which the TRX Intelligent ADD Shutdown BSCDSTPADAT feature is E(Mandatory) disabled. GBFD-111602
Prohibit Power EndMonthDS Saving End TPA Month
BSC6900
ENDSUBTS
End Sub Timeslot NO. BSC6900
Number of SET the end BTSFORBIDTS( subOptional) timeslot GBFD-111202 O&M of BTS This parameter specifies the time for dynamicall y disabling the TRX Intelligent SET Shutdown BSCDSTPA(Opt feature ional) each day. GBFD-111602
Time When the EndTimeTAC Function Is loseTrxPA Disabled
BSC6900
ENDTS
End TS
BSC6900
It indicates the end CIC of the Ater BLK interface Ater Interface ATERE1T1(Man CIC 4:1 datory) segment. GBFD-111801 Multiplexing
ENDTS
End TS
BSC6900
ENDTS
End Timeslot NO. BSC6900
It indicates the end CIC of the A interface CIC segment. When Operation mode is set to subrack No., slot No., port No., or CIC, the BLK parameter A Interface AE1T1(Mandato is Circuit ry) mandatory. GBFD-111803 Management SET Number of BTSFORBIDTS( the end Mandatory) timeslot GBFD-111202 O&M of BTS Status of the scheduled task. This parameter determines whether to SET start the SCHTSKSW(Ma scheduled ndatory) task. GBFD-111203 O&M of BSC Status of the ADD scheduled SUBTSK(Option subtask to al) be added GBFD-111203 O&M of BSC
ENF
Status
BSC6900
ENF
Subtask Status
BSC6900
En Iuo Out Cell ENGOVERL General DTHRSH OverLoad Thred
BSC6900
If the load of the underlaid subcell is greater than this threshold, certain calls in the underlaid subcell are handed over to the overlaid subcell to balance the traffic between the overlaid SET and GCELLHOIUO( underlaid Optional) subcells. GBFD-113201 Concentric Cell
ENGSMPSD LMACFLOW User Plane DL CTRL Flow Ctrl Switch
BSC6900
Whether to support PS downlink MAC back pressures in GSM. When the buffer is overflowed , the L2 transmissi on rate is limited if "User Plane DL Flow Ctrl Switch" is "ON". Thus, the data blocks are not lost. If "User Plane DL Flow Ctrl Switch" is "OFF", the L2 transmissi on rate is SET not limited. GCELLPSOTHE In this RPARA(Optiona case, the l) loss of MRFD-211503
ENIUO
Enhanced Concentric Allowed
BSC6900
Whether to enable the enhanced concentric cell algorithm in a concentric cell. If a cell supports the enhanced concentric cell function, when an overlaid-tounderlaid handover or an underlaidto-overlaid handover is decided, the MS compares the receive level value respectivel y with the ADD values of GCELL(Mandato "OtoU HO ry) Received GBFD-113201 Concentric Cell
Load ENLDHOPR Classification HO D Period BSC6900
Load Classification HO ENLDHOSTP Step BSC6900
If all the calls in the overlaid subcell are handed over to the underlaid subcell when the channel seizure ratio of the underlaid subcell is less than "En Iuo Out Cell Low Load Thred", the BSC load increases sharply. In this case, the target subcell may be congested and drop calls. To avoid such a problem, SET the GCELLHOIUO( hierarchica Optional) l loadGBFD-113201 Concentric Cell Signal level step for the hierarchica l loadbased handover from the overlaid subcell to SET the GCELLHOIUO( underlaid Optional) subcell GBFD-113201 Concentric Cell
ENLOWLDT En Iuo Out Cell HRSH Low Load Thred
BSC6900
If the load of the underlaid subcell is less than this threshold, certain calls in the overlaid subcell are handed over to the underlaid subcell to balance the traffic between the overlaid SET and GCELLHOIUO( underlaid Optional) subcells. GBFD-113201 Concentric Cell When this parameter is set to "ON", if there are no available Abis transmissi on resources, a highpriority user can preempt the transmissi on resources of a lowpriority user. If the preemption succeeds, a call drop occurs at SET the lowBSCBASIC(Opti priority onal) user. GBFD-118605 IP QOS
Transmission ENPREEMP Resource TTRANSAD Preempting MT Support
BSC6900
Transmission ENQUETRA Resource NSADMT Queuing Support BSC6900
When this parameter is set to "ON", if there are no available Abis transmissi on resources, the BSC6900 starts the queuing procedure for the services to wait for available SET transmissi BSCBASIC(Opti on onal) resources. GBFD-118605 IP QOS
ENSOVERL DTHRSH
En Iuo Out Cell Serious OverLoad Thred
BSC6900
If the load of the underlaid subcell is greater than this threshold, the period of the loadbased handover from the underlaid subcell to the overlaid subcell, "UL Subcell Load Hierarchic al HO Periods", is decreased by "MOD Step LEN of UL Load HO Period" every second to SET accelerate GCELLHOIUO( the Optional) handover. GBFD-113201 Concentric Cell
ENTCHADJA Enhanced TCH LLOW Adjust Allowed
BSC6900
Whether to enable the cell to centralize two busy half rate TCHs in different timeslots into one timeslot through handover and then to combine the two idle half rate TCHs in the other timeslot into one full rate SET TCH GCELLCHMGB dynamicall ASIC(Optional) y GBFD-113402
Dynamic Adjustment Between FR and HR
ENTITYT
Local entity type
BSC6900
Type of the M3UA local entity. For details about the ASP and IPSP, see RFC4666. M3UA_AS P: suggested to use when there is a signaling transfer point (STP) between the local entity and the destination entity M3UA_IPS P: suggested to use when there is no signaling ADD transfer A over IP M3LE(Mandator point GBFD-118602 A IP over y) (STP) GBFD-118622 E1/T1
ENTITYT
Destination entity type BSC6900
Type of the destination entity. For details, see RFC4666. M3UA_AS P: suggested to use when there is a signaling transfer point (STP) between the local entity and the destination entity M3UA_IPS P: suggested to use when there is no signaling transfer point ADD (STP) M3DE(Mandator between y) the local GBFD-118602 A over IP
ENUTOOLO IniLev for EnUtoO ADINILEV Load HO BSC6900
Initial signal level used to compute the handover zone for an MS during the hierarchica l loadbased handover from the underlaid subcell to the overlaid subcell of the SET enhanced GCELLHOIUO( concentric Optional) cell GBFD-113201 Concentric Cell Whether to enable the enhanced packet loss SET concealme TCPARA(Option nt (EPLC) al) function GBFD-115704
EPLCSwitch EPLC Switch
BSC6900
Enhancement Packet Loss Concealment( EPLC)
ERCODE
Return Code
BSC6900
EXP LOG(Optional)
Return code of the command. If this parameter is specified, only the correspond ing record is displayed. If this parameter is not specified, the return code is not O&M of BSC considered GBFD-111203 Security . MRFD-210305 Management
ERGCALLDI Emergent Call S Disable
BSC6900
Whether to disable emergency calls. For the MSs of access levels 0 to 9, if the value of this parameter is NO, emergency calls are enabled. For the MSs of access levels 11 to 15, emergency calls are disabled only when the relevant access control bit is set to 0 and this SET parameter Emergency GCELLCCBASI is set to Call Service C(Optional) YES. GBFD-110202 (TS12)
ERRALARM Error-frame alarm THD threshold BSC6900
SET ETHPORT(Opti onal) ADD PPPLNK(Option al) ADD MPGRP(Optiona l) SET ETHPORT(Opti onal) ADD PPPLNK(Option al) ADD MPGRP(Optiona l)
Errorframe alarm threshold
GBFD-118630 Ethernet OAM
ERRDETECT Error-frame SW detect switch
BSC6900
Errorframe detect switch
ESLDSCP
ESL DSCP
BSC6900
SET BSCABISPRIM AP(Optional) SET BSCABISPRIM AP(Optional)
Differentiat ed service code of the specified ESL None Service priority of the ESL
None
ESLPRI
ESL Priority
BSC6900
None
None
ESLSP
ESL Service PRI BSC6900
Priority of a service running over an extended signaling link (ESL). ESLs are used for more reliably transmittin g important signaling messages. SET 0 is the BSCSRVPRI(Op highest tional) priority. GBFD-118605 IP QOS SET BSCABISPRIM AP(Optional) Specified ESL Vlan Id
ESLVLANID
ESL VlanId
BSC6900
ESSN
End Sync Serial No.
BSC6900
End synchroniz ation EXP number of ALMLOG(Option the alarm Faulty al) record MRFD-210304 Management Timer for the BSC waiting for an Establish Indication message after sending an Immediate Assignmen t message. If T3101 expires before the BSC receives an Establish Indication message, the BSS SET releases Assignment GCELLTMR(Opt the seized and Immediate ional) SDCCH. GBFD-110502 Assignment
ESTABINDTI MER T3101
BSC6900
Add TA to A ESTINDL3M Interface EST SGTAFLAG IND
BSC6900
ESTTIME
Ring II Rotating Penalty Time
BSC6900
Whether to add the TA value to a complete layer-3 message to provide the LCS SET function on Simple Mode AITFOTHPARA( the A LCS(Cell ID + Optional) interface GBFD-115403 TA) When the OML is switched to a port where the connection is successfull y establishe d, the switchover cannot be performed over a certain period of time, which is specified as ring II rotating penalty time. In this manner, frequent switchover between the ports due to intermittent SET blinking Fast Ring BTSRINGATTR( can be Network Optional) avoided. GBFD-117802 Switch Support of Daylight Saving Time GBFD-116101 Configuration MRFD-210301 Management
ET
EndTime
BSC6900
SET TZ(Mandatory)
End time of DST
ET
End Time
BSC6900
EXP LOG(Optional)
The operation time of the log record is prior to this time. If this parameter is not specified, the end time is not limited. GBFD-111203 O&M of BSC
ET
End Time
BSC6900
Time when the scheduled subtask is stopped. If the time mode is set to "DAILY_T", "WEEKLY _T", or "MONTHL Y_T", you ADD should set SUBTSK(Manda this tory) parameter. GBFD-111203 O&M of BSC
ET
Execute Type
BSC6900
Execution mode of the commands 1. ONE_BY_ ONE: indicating that the commands are executed one by one according to the execution sequence. Only one command can be executed once. 2. PARALLE L: indicating that multiple commands are executed RUN in parallel. BATCHFILE(Opt Multiple ional) commands GBFD-111203 O&M of BSC The operation time of the log record is prior to this time. If this parameter is not specified, the end O&M of BSC time is not GBFD-111203 Security limited. MRFD-210305 Management
ET
End Time
BSC6900
COL LOG(Optional)
ET
End Time
BSC6900
End time of the alarm record. By EXP default, the ALMLOG(Option end time is Faulty al) 23:59:59. MRFD-210304 Management
ET
End Time
BSC6900
End time of the alarm record. By STA default, the ALMLOG(Option end time is Faulty al) 23:59:59. MRFD-210304 Management End date and time of a broadcast message. This is a key parameter for identifying a simple cell broadcast message. You can use "DSP GSMSCB" to query and obtain ADD the value GSMSCB(Mand of this Simplified Cell atory) parameter. GBFD-113602 Broadcast End date of the user operation. Input format: O&M of BSC YYYY&MM GBFD-111203 Security &DD MRFD-210305 Management
ET
End Time
BSC6900
ETD
End Date
BSC6900
ETIME
End Time
BSC6900
ADD OP(Mandatory) STR BTSLOG(Option al) End time
ETP
Log Type
BSC6900
EXP LOG(Optional)
Type of the log to be queried. The result is displayed by the O&M of BSC specified GBFD-111203 Security type. MRFD-210305 Management
ETT
End Time
BSC6900
ADD OP(Mandatory)
End time of the user operation. The input format of this parameter is O&M of BSC HH&MM& GBFD-111203 Security SS. MRFD-210305 Management
EWEEK
End week
BSC6900
SET TZ(Mandatory)
Support of Daylight Weekday Saving Time on which GBFD-116101 Configuration DST ends MRFD-210301 Management Support of Sequence Daylight of the end Saving Time week of GBFD-116101 Configuration DST MRFD-210301 Management Upper limit of extended output analog signal 1. If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 1" is set to CURRENT , the unit of this parameter Faulty is A. MRFD-210304 Management
EWSEQ
End week sequence
BSC6900
SET TZ(Mandatory)
Upper Limit of EX_ANO1_SI Signal Output of G_MAX External Analog 1 BSC6900
ADD EMU(Optional)
Lower Limit of EX_ANO1_SI Signal Output of G_MIN External Analog 1 BSC6900
ADD EMU(Optional)
Lower limit of extended output analog signal 1. If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 1" is set to CURRENT , the unit of this parameter Faulty is A. MRFD-210304 Management Sensor type of extended analog signal 1
EX_ANO1_T Sensor Type of YPE External Analog 1 BSC6900
ADD EMU(Optional)
Upper Limit of Measurement EX_ANO1_V Range of External AL_MAX Analog 1 BSC6900
ADD EMU(Optional)
Maximum measurem ent range of extended analog signal 1. If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 1" is set to CURRENT , the unit of this parameter Faulty is A. MRFD-210304 Management
Lower Limit of Measurement EX_ANO1_V Range of External AL_MIN Analog 1 BSC6900
ADD EMU(Optional)
Minimum measurem ent range of extended analog signal 1. If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 1" is set to CURRENT , the unit of this parameter Faulty is A. MRFD-210304 Management Upper limit of extended output analog signal 2. If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 2" is set to CURRENT , the unit of this parameter Faulty is A. MRFD-210304 Management
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
ADD EMU(Optional)
Minimum measurem ent range of extended analog signal 4. If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 4" is set to CURRENT , the unit of this parameter Faulty is A. MRFD-210304 Management
EXCACC
Exclusive Access BSC6900
Whether it is a SoLSA exclusive access cell. If it is a SoLSA exclusive access cell, only the MS subscribin g the Localised Service SET Area (LSA) GCELLSERVPA can access RA(Optional) this cell. GBFD-114101 GPRS
EXCEPFRA METHRES
Exceptional Frame Threshold of Mute Detect Class1 BSC6900
Threshold for the rate of the number of bad frames to the total number of TRAU frames. If the bad frame rate exceeds this threshold within the "Period of Mute Detection Class1", mute speech may be detected. The setting of "Mute Detection Class 2 Switch" determines whether to perform SET the class-2 GCELLSOFT(O mute ptional) detection. GBFD-111203 O&M of BSC Received signal strength at an MS expected in power forecast, which helps to compute the initial SET transmit GCELLPWRBA power of Active Power SIC(Optional) the BTS GBFD-117602 Control
EXPDLRXLE Expected DL V RX_LEV
BSC6900
EXPULRXLE Expected UL V RX_LEV
BSC6900
Received signal strength at the BTS expected in power forecast, which helps to compute the initial SET transmit GCELLPWRBA power of Active Power SIC(Optional) an MS GBFD-117602 Control ID of the cell. The cell ID cannot conflict with other cell IDs in the BSC6900. The cells in the BSC are ADD numbered GEXT2GCELL( sequentiall Configuration Mandatory) y. MRFD-210301 Management ADD GEXT2GCELL( Name of Mandatory) the cell GBFD-111202 O&M of BTS ID of the cell. The cell ID cannot conflict with other cell IDs in the BSC. The cells in the BSC are ADD numbered GEXT3GCELL( sequentiall Configuration Mandatory) y. MRFD-210301 Management ADD GEXT3GCELL( Name of Mandatory) the cell GBFD-111202 O&M of BTS
EXT2GCELLI D Cell Index EXT2GCELL NAME Cell Name
BSC6900
BSC6900
EXT3GCELLI D Cell Index EXT3GCELL NAME Cell Name
BSC6900
BSC6900
EXTADJCEL BSC Adjacent LID Cell Index
BSC6900
Index of the cell in ADD the EXTNCELL(Man adjacent datory) BSC Name of the cell in ADD the EXTNCELL(Man adjacent datory) BSC
EXTADJCEL BSC Adjacent LNAME Cell Name
BSC6900
Extended Cell EXTCELLTH Throughput RENH Enhancement
BSC6900
Whether to support the downlink throughput enhancem ent function of the dual timeslot cell. When this switch is turned on, the system can allocate the packet downlink channel of the odd number timeslot of dual timeslot SET bearer of GCELLPSOTHE the dual RPARA(Optiona timeslot l) cell. GBFD-114001 Extended Cell Whether to enable alarm SET extension BTSALM(Option input for al) the BTS GBFD-111202 O&M of BTS Whether the network Processing of requires an Measurement MS to Report send an Pre-processing SET extension of GCELLEXTMSR measurem GBFD-110801 Measurement PARA(Optional) ent report GBFD-110802 Report
EXTFlag
Extended Switch of Input Alarm BSC6900
Extension EXTMEASO Measurement RD Command
BSC6900
EXTRPTPER Extension MR IOD Period
BSC6900
Time Processing of interval Measurement between Report two Pre-processing SET extension of GCELLEXTMSR measurem GBFD-110801 Measurement PARA(Optional) ent reports GBFD-110802 Report
EXTRPTTYP Extension MR E Type
BSC6900
Type of an extension measurem ent report. There are three types of extension measurem ent reports: type 1, type 2, and type 3. Type 1: No matter whether the BSIC was decoded, the MS sends the network a measurem ent report on the six strongest TRXs. The measurem Processing of ent report Measurement contains Report the Pre-processing SET received of GCELLEXTMSR signal level GBFD-110801 Measurement PARA(Optional) and the GBFD-110802 Report
EXTTP
Cell Extension Type
BSC6900
Whether a cell is an extension cell. A doubletimeslot extension cell regards an additional TDMA frame as access delay extension. In theory, the supported TA value is 219, that is, a time ADD delay of GCELL(Optional about 120 ) kilometers. GBFD-114001 Extended Cell Whether to send the Dummy message during the deactivate d period of SET the GCELLPSBASE extended Extended (Optional) uplink TBF GBFD-119203 Uplink TBF
Not Send Dummy Message with EXTUTBFNO Extended Uplink DATA TBF BSC6900
FACCHRES ENDINT
FACCH Msg Resend Interval
BSC6900
Interval of sending a paging message or notification message on the FACCH. Messages on the FACCH are sent in the mode of speech frame stealing. A large number of consecutiv e stolen speech frames may affect the voice quality and even lead to no voice. Public Voice Therefore, Group Call the BTS Service SET must Public Voice GCELLGSMR(O control the GBFD-510301 Broadcast ptional) time GBFD-510302 Service
FACCHSEN FACCH Send DNOTMSGIN Notification Msg D Indication
BSC6900
Whether to allow sending notification messages on the FACCH. If the value of this parameter is YES, an MS engaged in a point-topoint call can receive a notification message for a group call. You can interrupt the existing SET call and GCELLGSMR(O join the Group Call ptional) group call. GBFD-510307 EMLPP Whether to allow sending paging messages on the FACCH. If the value of this parameter is YES, an MS can receive a paging message on the group call channel. You can leave the group call and SET respond to GCELLGSMR(O the paging Group Call ptional) message. GBFD-510307 EMLPP
FACCHSEN DPGMSGIN D
FACCH Send Paging Msg Indication
BSC6900
TRM Factor FACTORSW switch
BSC6900
Activation factor switch
FACTORYM ODE Factory Mode
BSC6900
If this parameter is set to ON, the BSC assigns the channels in the TRXs of the cell in a polling manner. Therefore, each TRX has an even chance to be used. In this way, the connection between the TRX and the RF can be checked without SET manual GCELLCHMGB dialing ASIC(Optional) tests. GBFD-111005
FAILSIGSTR Penalty Level PUNISH after HO Fail
BSC6900
Penalty signal level imposed on a target cell to which the handover fails due to congestion or poor radio quality. This penalty helps to prevent the MS from making a second handover HUAWEI I SET attempt to Handover GCELLHOFITP the target GBFD-110601 HUAWEI II EN(Optional) cell. GBFD-510501 Handover
Continuous FANADJUST adjustment COMMAND0 command Discrete FANADJUST adjustment COMMAND1 command Duty ratio FANADJUST adjustment COMMAND2 command
BSC6900
BSC6900
SET FANSPEED(Opt ional) SET FANSPEED(Opt ional)
Continuou s speed Configuration adjustment MRFD-210301 Management Discrete speed Configuration adjustment MRFD-210301 Management
BSC6900
Duty ratioSET based FANSPEED(Opt speed Configuration ional) adjustment MRFD-210301 Management
FANADJUST Fan adjustment MODE mode
BSC6900
SET Fan FANSPEED(Opt adjustment Configuration ional) mode MRFD-210301 Management SET FANSPEED(Ma Type of the Configuration ndatory) fan MRFD-210301 Management
FANFLAG
Fan Type
BSC6900
FANSPEED MODE
Speed adjustment mode BSC6900
SET Fan FANSPEED(Ma adjustment Configuration ndatory) mode MRFD-210301 Management
FANTYPE
FanBox Type
BSC6900
FASTCALLT Fast Call Setup CHTHRESH TCH Usage OLD Threshold
BSC6900
LOD Type of the Configuration FAN(Mandatory) fan box MRFD-210301 Management After a channel request message is received, the type of the channel needs to be specified. In this case, if the threshold of the load on the TCH in the current cell is smaller than the Fast Call Setup TCH Usage Threshold and the request message is not issued during SET location Assignment GCELLBASICP update or and Immediate ARA(Optional) paging, a GBFD-110502 Assignment
FASTCNETF LAG Configure Ring II BSC6900
Ring II function switch. The parameter should be set to "YES" when the SET ring II Fast Ring BTSRINGATTR( function is Network Optional) enabled. GBFD-117802 Switch Whether to enable the memory self-check SET and selfTCPARA(Option healing al) function GBFD-111203 O&M of BSC Whether to send and process the flow control frame on the physical layer. The setting of this parameter must be negotiated with that SET on the ETHPORT(Opti interconne onal) cted side. None
FaultDetectS Fault Detect witch Switch
BSC6900
FC
Physical layer flow control switch
BSC6900
None
FC
Flow Control
BSC6900
If the parameter is set to "YES", it indicates that some data packets are discarded to ensure the basic functions of the BTS are not affected when the FE port is overloaded . After the port is not overloaded SET , the flow BTSETHPORT( control is Optional) stopped. GBFD-118601 Abis over IP Threshold for stopping RSL flow control. If the occupancy of the LAPD queue is less than this threshold, the SET BSC6900 GTRXFC(Option stops flow GSM Flow al) control. GBFD-111705 Control Flow SET control ETHPORT(Man parameter datory) index None
FCETHD
Flow Control End Threshold BSC6900
FCINDEX
Flow control parameter index
BSC6900
None
FCINDEX
BSC6900
Flow ADD control PPPLNK(Option parameter al) index None
None
FCINDEX
BSC6900
Flow Abis IP over ADD control E1/T1 MPGRP(Optiona parameter GBFD-118611 A IP over l) index GBFD-118622 E1/T1
FCINDEX
BSC6900
Flow ADD control IPLOGICPORT( parameter Optional) index None ADD PORTFLOWCT RLPARA(Manda tory) Flow control parameter index None
None
FCINDEX
BSC6900
None 2G/3G CoTransmission Resources Management on MBSC
FCINDEX
BSC6900
Flow ADD control ETHTRK(Option parameter al) index MRFD-211503 SET BSCABISPRIM AP(Mandatory) Flow control parameter index None
FCINDEX
BSC6900
None
FCN
Cabinet No. of Parent BTS
BSC6900
Cabinet ADD No. of the BTSAUTOPLAN parent (Mandatory) BTS
Compact BTS Automatic Configuration GBFD-510701 and Planning
FCN
Cabinet No. of Father BTS
BSC6900
Cabinet ADD No. for the BTSCONNECT( port of the Optional) father BTS GBFD-111202 O&M of BTS Threshold for starting RSL flow control. If the occupancy of the LAPD queue is greater than this threshold, the SET BSC6900 GTRXFC(Option starts flow GSM Flow al) control. GBFD-111705 Control CRC ADD verification PPPLNK(Option mode of Link al) PPP link. MRFD-210103 aggregation CRC ADD verification MPLNK(Optional mode of ) MP link. GBFD-111202 O&M of BTS Flow control switch. Other switches are valid only when "Flow SET control FCSW(Mandato switch" is GSM Flow ry) "ON". GBFD-111705 Control
FCSTHD
Flow Control Start Threshold BSC6900
FCSTYPE
CRC check mode BSC6900
FCSTYPE
CRC check mode BSC6900
FCSW
Flow control switch
BSC6900
FCV
Float-Charging Voltage
BSC6900
Float charging voltage. Float charging compensat es the discharged capacity of the battery so that the battery can be charged to full voltage indefinitely. The value of this parameter is slightly lower than the even charging voltage. See the vendor specificatio n for the setting of this parameter. SET In multiBTSAPMUBP(O mode ptional) scenario, GBFD-111202 O&M of BTS
FDDBA1 Input FDDBA1TAG Tag
BSC6900
Input mode of the BA lists. AUTO: In this mode, the system fills in the BA1 and BA2 lists according to neighborin g relations of cells. MANU: In this mode, you can maintain the BA tables by yourself. If the neighborin g relations of cells are changed, for example, after a neighborin SET g cell is GCELLIDLEFD added or DBA1(Mandator deleted, GSM/WCDMA y) you must GBFD-114301 Interoperability This parameter indicate whether to generate the FDD BA2 table automatica lly according to neighbor cell relations or to input the SET FDD BA2 GCELLHOFDD table Configuration BA2(Mandatory) manually MRFD-210301 Management
FDDBA2 Input FDDBA2TAG Tag
BSC6900
FDDCELLOF FDD Reporting F Offset
BSC6900
Offset of a FDD cell report. When the priority of a 3G cell is sequenced , the value of this parameter be added to the receive level of the 3G cell in the measurem ent report. The values of this parameter correspond to the following decibel values: 0: 0 dB SET 1: 6 dB GCELLCCUTRA ... GSM/WCDMA NSYS(Optional) 7: 42 dB GBFD-114301 Interoperability
FDDCELLTH FDD Reporting RED Threshold
BSC6900
Threshold of a FDD cell report. When the receive level value in the measurem ent report of a 3G cell exceeds the value of this parameter, the measurem ent report takes effect. After the valid measurem ent report is filtered, the 3G cell joins the cell priority sequence. The values of this SET parameter GCELLCCUTRA correspond GSM/WCDMA NSYS(Optional) to the GBFD-114301 Interoperability Diversity indication of a 3G cell. This parameter indicates whether the transmit diversity mode on the common channel in a cell is activated.0 SET means GCELLIDLEFD No,1 DBA1(Mandator means GSM/WCDMA y) Yes. GBFD-114301 Interoperability
FDDDIVERSI Diversity TY Indication
BSC6900
FDDDLUARF Downlink AN Frequency
BSC6900
Downlink frequency number that an MS in the connected mode retrieves from the 3G neighborin g cell list. The numbers are sent through system message 2QUATER/ MI. The value ranges of frequency numbers SET vary with GCELLIDLEFD correspond DBA1(Mandator ing band GSM/WCDMA y) reporting. GBFD-114301 Interoperability Minimum Ec/No of ADD the 3G GEXT3GCELL( FDD cell Optional) candidate
FDDECQUA PS FDD Ec/No LTHRSH Quality Threshold BSC6900
GSM/WCDMA GBFD-114301 Interoperability
FDDFREQC FDD Multirate NUM Reporting
BSC6900
Number of UTRAN FDD cells that should be SET included in GCELLCCUTRA measurem GSM/WCDMA NSYS(Optional) ent report GBFD-114301 Interoperability
FDDQMIN
FDD Qmin
BSC6900
This parameter specifies one of the parameters for FDD cell reselection . A FDD cell becomes a candidate cell if all the following conditions are met for five consecutiv e seconds: 1.Receive level of the FDD cell > Average receive level of the current serving cell + "FDD Q offset"; The FDD SET cell meets GCELLCCUTRA the GSM/WCDMA NSYS(Optional) following GBFD-114301 Interoperability
FDDQMINOF FSET FDD Qmin Offset BSC6900
Offset of the minimum threshold for Ec/No during a FDD cell reselection . A FDD cell becomes a candidate cell if all the following conditions are met for five consecutiv e seconds: 1.Receive level of the FDD cell > Average receive level of the current serving cell + "FDD Q offset"; The FDD SET cell meets GCELLCCUTRA the GSM/WCDMA NSYS(Optional) following GBFD-114301 Interoperability
FDDQOFF
FDD Q Offset
BSC6900
This parameter specifies one of the thresholds of the signal level for 3G cell reselection . A FDD cell becomes a candidate cell if all the following conditions are met for five consecutiv e seconds: 1.Receive level of the FDD cell > Average receive level of the current serving cell + "FDD Q offset"; SET The FDD GCELLCCUTRA cell meets GSM/WCDMA NSYS(Optional) the GBFD-114301 Interoperability
FDDREP
FDD REP QUANT
BSC6900
This parameter specifies whether Ec/No or RSCP is used for the measurem ent report on a FDD cell. Ec/No stands for the signalto-noise GSM/WCDMA ratio. Interoperability RSCP Processing of stands for Measurement the Report received Pre-processing SET signal GBFD-114301 of GCELLCCUTRA code GBFD-110801 Measurement NSYS(Optional) power. GBFD-110802 Report
FDDRSCPMI N FDD RSCP Min.
BSC6900
Minimum level threshold of UTRAN cell reselection . During the cell reselection decision from a GSM cell to a FDD cell, this parameter is used to calculate the RSCP threshold of the target cell. A FDD cell becomes a candidate cell if all the following conditions are met for five consecutiv SET e seconds: GCELLCCUTRA 1.Receive GSM/WCDMA NSYS(Optional) level of the GBFD-114301 Interoperability Minimum RSCP of ADD the 3G GEXT3GCELL( FDD cell Optional) candidate
FDDRSCPQ PS FDD RSCP UALTHRSH Quality Threshold BSC6900
GSM/WCDMA GBFD-114301 Interoperability
FDDSCRAM BLE Scrambling Code BSC6900
Scrambling code of a 3G cell, used for distinguishi ng MSs or cells. Scrambling codes are used after spreading. Therefore, the bandwidth of a signal is not changed. Instead, signals from different sources are differentiat ed. Scrambling prevents multiple transmitter s from SET using the GCELLIDLEFD same code DBA1(Mandator word for GSM/WCDMA y) spreading. GBFD-114301 Interoperability Number of CPU usage sampling times for fast judgment. The value of this parameter must be of half size of SET "Filter FCCPUTHD(Opt window" or GSM Flow ional) smaller. GBFD-111705 Control
Fast judgement FDWINDOW window
BSC6900
FERRPTEN
FER Report Enable
BSC6900
FERSTATTH 1 FER Threshold 1 BSC6900
Whether the BTS reports the frame erase ratio in a measurem ent report or preprocess SET ed Voice Quality GCELLSOFT(O measurem Index (Uplink ptional) ent report GBFD-116801 VQI) If the FER carried in the measurem ent report (MR) received is lower than or equal to "FER threshold 1", the value of "FER 0 and Quality Level N" is incremente d by one. If the FER in the MR received is greater than "FER threshold 1" but meanwhile lower than or equal to "FER threshold 2", the SET value of Voice Quality GCELLOTHEXT "FER 1 Index (Uplink (Optional) and Quality GBFD-116801 VQI)
If the FER carried in the MR received is greater than "FER threshold 2" but meanwhile lower than "FER threshold 3", the value of "FER 2 and Quality SET Level N" is Voice Quality GCELLOTHEXT incremente Index (Uplink (Optional) d by one. GBFD-116801 VQI)
If the FER carried in the MR received is greater than "FER threshold 7", the value of "FER 7 and Quality SET Level N" is Voice Quality GCELLOTHEXT incremente Index (Uplink (Optional) d by one. GBFD-116801 VQI)
FHMODE
Frequency Hopping Mode
BSC6900
This parameter specifies the frequency hopping mode of a cell. When this parameter is set to "NO_FH", all the TRXs of the cell do not join in frequency hopping. When this parameter is set to "BaseBand _FH", the cell is in baseband frequency hopping SET mode. In GCELLHOPTP( this case, Optional) there can SET be TRXs GCELLHOPQUI that do not CKSETUP(Man join in datory) frequency GBFD-113701
FILE
File Name
BSC6900
EXP LOG(Optional)
The name of the file cannot contain the path and suffix. The suffix is automatica lly added. The name of the file is composed of English letters, numerals, and common symbols, and the characters (@, #, !, %, ^, &, *, [, ], /, \, ', and ") cannot appear in O&M of BSC the name GBFD-111203 Security of the file. MRFD-210305 Management
FILE
Target File Path
BSC6900
O&M of BSC BSC/RNC ZIP Path of the GBFD-111203 Software FILE(Mandatory) target file MRFD-210401 Management
FileName
File Name
BSC6900
FILEPATH
Export File Path
BSC6900
Name of the backup file. The file name is composed of English letters, numerals, and common symbols, and the characters (@, #, !, %, ^, &, *, [, ], /, \, ', and ") cannot BKP appear in O&M of BSC LOGDB(Optiona the file GBFD-111203 Security l) name. MRFD-210305 Management Path to save the exported file. The path must be a valid path on the OMU server. If the OMU runs the LINUX system, the input path must start with the symbol "/" or "\", for example, "/mml". If the OMU runs the WINDOW S system, the input path can be a full EXP path (for CFGMML(Optio example, nal) "D:\mml") EXP or a GCELLTEMPLA relative Configuration TE(Optional) path (for MRFD-210301 Management
FILETYPE
Log File Type
BSC6900
Type of the EXP alarm log O&M of BSC ALMLOG(Option file to be GBFD-111203 Faulty al) exported MRFD-210304 Management Maximum number of former values when the receive level of the serving cell or the receive level of the neighbor cell is filtered. The greater the value, the greater the weight of the former receive levels; otherwise, the greater the weight SET of the later GCELLNC2PAR receive A(Optional) levels. GBFD-116201
FILTERWND Filter Window SIZE Size
BSC6900
FIN
Final
BSC6900
EXP LOG(Optional)
Execution result. If you select "FALSE", only the records of failed operations are displayed. If you select "TRUE", only the records of successful operations are displayed. If this parameter is not specified, all the O&M of BSC records are GBFD-111203 Security displayed. MRFD-210305 Management
FINESTEPP 0.2dB Power CALLOWED Control Enable
BSC6900
Whether to enable 0.2 dB downlink power control. This power control function improves SET the power HUAWEI III GCELLPWR3(O control Power Control ptional) precision. GBFD-117601 Algorithm
FIRESET
Fire-extinguishing Equipment BSC6900
Whether to start the fireextinguishi ng equipment of the BTS. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSOUTPUT(O in another ptional) mode. GBFD-111202 O&M of BTS
FIXABISPRI Fix Abis Prior ORABISLOA Choose Load DTHRED Thred
BSC6900
This parameter specifies the static Abis resource load threshold. If the static Abis resource load is less than the static Abis resource load threshold, the TCHF is preferential ly allocated. Otherwise, whether the TCHF or the TCHH should be preferential ly allocated is SET determined BTSFLEXABISP by the ARA(Optional) dynamic GBFD-117301 Flex Abis
FlashAlmClrT Flash Alarm Clear hd Threshold BSC6900
Time threshold for delaying the report of a clear alarm. If the alarm recurs within the time specified by this parameter after it is cleared, the clear alarm is not reported. Otherwise, the clear alarm is reported. If this parameter is set to 0, the clear alarm is reported immediatel SET y when the BTSALMFLASH alarm is Faulty THD(Optional) cleared. MRFD-210304 Management
FlashAlmOcc Flash Alarm urThd Occur Threshold
BSC6900
Time threshold for delaying the report of an alarm. If the alarm is cleared within the time specified by this parameter, the alarm is not reported. Otherwise, the alarm is reported. If this parameter is set to 0, the alarm is reported immediatel SET y when the BTSALMFLASH alarm Faulty THD(Optional) occurs. MRFD-210304 Management Whether to enable the filtering of the intermittent alarms. If the value of this parameter is "DISABLE" , "Flash Statis Alarm Raise Time Window" and "Flash Statis Alarm SET Clear BTSALMFLASH Time" are Faulty TW(Optional) invalid. MRFD-210304 Management
Flash Filter FlashFilterEn Enable
BSC6900
Flash Statistic FlashStatisAl Alarm Clear Time mClrTW Window BSC6900
Time window for observing the clearance of the intermittent alarms. In this time window, the BTS statistical alarm is cleared if the occurrence of the intermittent alarm SET meets the BTSALMFLASH related Faulty TW(Optional) threshold. MRFD-210304 Management Time window for observing the intermittent alarms generated during the statistical period. In this time window, the BTS statistical alarm is reported if the occurrence of the intermittent alarm SET meets the BTSALMFLASH related Faulty TW(Optional) threshold. MRFD-210304 Management
Flash Statistic FlashStatisAl Alarm Raise Time mOccurTW Window BSC6900
FLEXABISM ODE Flex Abis Mode
BSC6900
ADD BTS(Optional)
Service timeslot assignmen t mode for the BTS. If this parameter is set to FIX_16K_ ABIS, the BSC6900 assigns a fixed Abis transmissi on timeslot to a TCH. If this parameter is set to FLEX_ABI S, the BSC6900 assigns an Abis transmissi on timeslot dynamicall y to a TCH (except the static PDCH) to increase the resource GBFD-117301 Flex Abis
FLEXMAIO
Start Flex MAIO Switch
BSC6900
Whether to enable the function of Flex mobile allocation index offset (MAIO). In the tight frequency reuse case of the GSM system, adjacentchannel interferenc e and cochannel interferenc e easily occur between channels. If the frequency hopping function and the Flex MAIO ADD function GCELL(Optional are ) enabled in GBFD-117001 Flex MAIO
FLEXTSCSW ITCH Flex TSC Switch
BSC6900
Whether to enable the function of the Flex training sequence code (TSC). If the value of this parameter is ON and the BTS supports the Flex TSC function, the BSS dynamicall y allocates TSCs to A5/1 hopping Encryption frequencie Flow s for Optimization improving SoftSET the GBFD-113521 Synchronized GCELLSOFT(O security of GBFD-118201 Network ptional) calls. GBFD-117001 Flex MAIO Adaptive Period of Adjustment of SET collecting Uplink and BSCPSSOFTPA the traffic Downlink RA(Optional) statistics GBFD-119501 Channels Fast flux measurem ent period. The ratio of the uplink flux to the downlink flux is calculated at the interval specified by this parameter to determine Adaptive the current Adjustment of SET service Uplink and BSCPSSOFTPA priority Downlink RA(Optional) type. GBFD-119501 Channels
Flux FlowCountPe Measurement riodTicks Period
BSC6900
FLOWCOUN Fast Flux TPERIODTS Measurement RAPIDADJ Period
BSC6900
FLOWCTRL Flow control SWITCH switch
BSC6900
SET Port flow ETHPORT(Opti control onal) switch
None
None
BSC6900
ADD Link flow PPPLNK(Option control al) switch
None
None
BSC6900
ADD Link flow MPGRP(Optiona control l) switch Logical ADD port flow IPLOGICPORT( control Optional) switch ADD Port flow ETHTRK(Option control al) switch
None
None
BSC6900
BSC6900
None
None
BSC6900
Specified port flow control switch
IP QOS 2G/3G CoTransmission Resources GBFD-118605 Management MRFD-211503 on MBSC
Filter Parameter FLTPARAA1 A1
BSC6900
One of the nine parameters (filter parameters A1 to A8 and filter parameter B) used to configure the filter for determinin g whether the received signal level drops rapidly. The computatio n formula is as follows: C1(nt) = A1 x C(nt) + A2 x C(ntt) + A3 x C(nt-2t) + ... + A8 x C(nt-7t) If C1(nt) is SET less than B GCELLHOEMG( and C(nt) HUAWEI I Optional) is less than GBFD-110601 Handover
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
FLTPARAB
Filter Parameter B
BSC6900
Trend of the received signal level of the cell during a period. This parameter helps to configure the filter for determinin g whether the received signal level drops rapidly. If this parameter is higher, a more rapid signal level drop is required to trigger the handover due to SET rapid GCELLHOEMG( signal level HUAWEI I Optional) drop. GBFD-110601 Handover
FLUSHTRAN SFERSWITC FLUSH-LL PDU H Transfer Switch
BSC6900
This parameter determines whether the BSC transfers the LLC PDUs in the buffer to the target cell or discards these LLC PDUs in the buffer when receiving the FLUSHLL SET message BSCPSSOFTPA from the RA(Optional) SGSN. GBFD-114101 GPRS
FMSMAXOP MS_TXPWR_MA CC X_CCH BSC6900
FMUTYPE
FMU Board Type BSC6900
Maximum transmit power level of MSs. As one of the cell reselection parameters in system message 3, this parameter is used to control the transmit power of MSs. For details, see GSM Rec. 05.05. In a GSM900 cell, the maximum power control level of an Radio MS ranges Common from 0 to Channel 19, Management SET correspond System GCELLCCCH(O ing GBFD-111003 Information ptional) respectivel GBFD-111101 Sending SET Type of the BTSFMUABP(O FMUA ptional) board GBFD-111202 O&M of BTS
FN
File Name
BSC6900
Name of EXP the ELABEL(Option electronic al) label file
Inventory MRFD-210303 Management
FN
File Name
BSC6900
FN
File Name
BSC6900
DLD LICENSE(Mand atory) ULD LICENSE(Mand atory) EXP DEVFILE(Option al)
Name of the file Name of the file
O&M of BSC BSC/RNC GBFD-111203 Software MRFD-210401 Management
FN
File Name
BSC6900
Name of the file. The following special EXP characters CFGMML(Optio are not nal) allowed in BKP the file DB(Optional) name: \, /, EXP :, *, ?, ", <, GCELLTEMPLA >, |, (, ), &, Configuration TE(Optional) and $. MRFD-210301 Management Name of the specified file. By default, the CHK file is in the DATA2LIC(Opti OMU onal) active-area RVK path LICENSE(Optio \ftp\license License nal) folder. MRFD-210403 Management DLD RETANTCFG(M andatory) EXP BTSDEVFILE(O ptional) LOD RETANTCFG(M andatory) ULD BTSLOG(Manda tory) DLD BTSSW(Mandat ory)
FN
File Name
BSC6900
FN
File Name
BSC6900
File name of the software to be downloade d GBFD-111202 O&M of BTS
FN
File Name
BSC6900
File name of the software to be downloade d.The file name must be with the extension of *.zip.If you do not enter the file name, all the valid files in the directory are downloade d. These valid files are extracted DLD from the BTSPATCH(Opt patch ional) package. GBFD-111202 O&M of BTS
FORBIDEDG Allow E Down G U Up Switch
BSC6900
Switch specifying whether to allow the downlink EGPRS TBF and the uplink GPRS TBF to share the same channel. On: allow the downlink EGPRS TBF and the uplink GPRS TBF to share the same channel; Off: prohibit the downlink EGPRS TBF and the uplink GPRS TBF SET sharing the BSCPSSOFTPA same RA(Optional) channel.
PDCH Dynamic Adjustment EGPRS Load Sharing Adaptive Adjustment of Uplink and Downlink Channels
Anti DPC FORBIDNO7 Intermittent FLASHDISC Disconnect Timer BSC6900
Length of the timer for determinin g the intermittent disconnecti on of the SS7 link to the DPC. When the time of SS7 link disconnecti on exceeds the period specified by the timer, the BSC performs correspond ing operations, including clearing the calls carried on the disconnect ADD ed link. A Interface GCNNODE(Opti Otherwise, Protocol onal) the system GBFD-111804 Process Time limit for SET restraining Automatic TCPARA(Option the noise Level Control al) level GBFD-115601 (ALC) Whether the forced phase-2 SET access is BSCPSSOFTPA allowed for RA(Optional) the MSs GBFD-114101 GPRS
Force_Limit_ Time Force Limit Time BSC6900
Force MS TwoForce2Phase phase Access
BSC6900
FORCEDCE LLEFRSWIT Allow Forced EFR CH in Cell BSC6900
Whether to forcibly enable the EFR function. When this parameter is set to YES, if both the MS and the BSC6900 support the enhanced full rate (EFR), the BSC6900 forcibly enables the EFR function even if the MSC does SET not support Call Control GCELLSOFT(O the GBFD-110501 Enhanced Full ptional) function. GBFD-113301 Rate Whether an MS is forced to send a Handover Access message, which is indicated by an information element in HUAWEI I SET the Handover GCELLSOFT(O handover GBFD-110601 HUAWEI II ptional) command. GBFD-510501 Handover Port No. of the father BTS ADD connected BTSAUTOPLAN with the (Mandatory) BTS GBFD-111202 O&M of BTS
Force MS to FORCEMSA Send Ho Access CCESS SWITCH BSC6900
FPN
Dest Father BTS Port No. BSC6900
FPN
Dest Father BTS Port No. BSC6900
Number of the port for ADD the BTSCONNECT( destination Mandatory) father BTS GBFD-111202 O&M of BTS Maximum time of delay for multiplexin g. This parameter is used for the system to send the multiplexed data. If the time for buffering the data exceeds this value, the system does not wait for the multiplexin g of other packets. In this way, the overlong ADD delay can IPMUX(Optional be ) prevented. None
FPTIMER
Maximum Delay Time[ms]
BSC6900
None
FQBSICOPT Freq. and BSIC SWITCH Optimize Switch
BSC6900
Whether to generate the frequency and BSIC by using the Compact BTS SET automatic Automatic BTSAUTOPLAN optimizatio GBFD-510702 Capacity CFG(Optional) n algorithm GBFD-510607 Planning
FQBSICSWI Freq. and BSIC TCH Plan Switch
BSC6900
If this switch is on, it indicates that the frequency and BSIC are generated automatica lly. If this switch is off, it indicates that the data must SET be BTSAUTOPLAN configured CFG(Optional) manually. GBFD-510601 If this switch is on, it indicates that the frequency and BSIC are generated automatica lly. If this switch is off, it indicates that the data must SET be BTSAUTOPLAN configured CFG(Optional) manually. GBFD-510701
PICO Automatic Configuration and Planning
FQBSICSWI Freq. and BSIC TCH1 Plan Switch
BSC6900
FRAGSIZE
MP flake size
BSC6900
MP segment size,the length of packet should be Abis MUX ADD bigger or UDP MUX for MPGRP(Optiona equel with GBFD-118604 A l) it. GBFD-118610 Transmission
FRAMEOFF SET
Frame Offset [Frame No]
BSC6900
SET BTSEXCURSIO N(Mandatory) SET BSCSYNCOFF( Mandatory)
FRAMEOFF SET
Frame Offset
BSC6900
Frame offset of Softthe BTS Synchronized clock GBFD-118201 Network Frame offset. The frame offset technology arranges the frame numbers of different cells under the same BTS to be different from one another by one frame offset. Thus, the FCH and SCH signals of neighborin g cells do not appear in the same frame, which is helpful for the coding of an MS. SET If the value GCELLOTHEXT of this Configuration (Optional) parameter MRFD-210301 Management
FRDLDTX
FR Use Downlink DTX BSC6900
Whether the downlink discontinu ous transmissi on (DTX) function is enabled for full rate (FR) calls. This function is also restricted by the DTX switch in the MSC. If the MSC allows the downlink DTX for calls and the value of this parameter( FRDLDTX) is YES, the downlink Discontinuous DTX is Transmission SET enabled for (DTX) GCELLBASICP FR calls of GBFD-114801 Downlink ARA(Optional) cells. GBFD-115501 AMR FR Time mode used when the log is exported. "ONTIME" indicates the time between two exact time. "RELATIV E_T" indicates the time before the O&M of BSC EXP current GBFD-111203 Security LOG(Mandatory) time. MRFD-210305 Management
FREQ
Time Mode
BSC6900
FREQ
Time Mode
BSC6900
Based on different requiremen ts, you can set different time points for the scheduled task. Seven time modes are available: 1. ONTIME: When this parameter is set to "ONTIME", the command is executed once only at the specified time point. 2. DAILY_T: When this parameter ADD is set to SUBTSK(Manda "DAILY_T", tory) the GBFD-111203 O&M of BSC
FREQ
Frequency
BSC6900
ADD GTRX(Mandator Frequency Frequency y) of the TRX GBFD-110101 Band
FREQ1
Frequency 1
BSC6900
ADD GCELLFREQ(O ptional) ADD GCELLMAGRP( Frequency Frequency Optional) 1 GBFD-110101 Band
FREQ10
Frequency 10
BSC6900
FREQ11
Frequency 11
BSC6900
FREQ12
Frequency 12
BSC6900
FREQ13
Frequency 13
BSC6900
FREQ14
Frequency 14
BSC6900
FREQ15
Frequency 15
BSC6900
FREQ16
Frequency 16
BSC6900
FREQ17
Frequency 17
BSC6900
FREQ18
Frequency 18
BSC6900
FREQ19
Frequency 19
BSC6900
FREQ2
Frequency 2
BSC6900
FREQ20
Frequency 20
BSC6900
FREQ21
Frequency 21
BSC6900
FREQ22
Frequency 22
BSC6900
FREQ23
Frequency 23
BSC6900
FREQ24
Frequency 24
BSC6900
FREQ25
Frequency 25
BSC6900
FREQ26
Frequency 26
BSC6900
FREQ27
Frequency 27
BSC6900
FREQ28
Frequency 28
BSC6900
FREQ29
Frequency 29
BSC6900
FREQ3
Frequency 3
BSC6900
FREQ30
Frequency 30
BSC6900
FREQ31
Frequency 31
BSC6900
FREQ32
Frequency 32
BSC6900
FREQ33
Frequency 33
BSC6900
FREQ34
Frequency 34
BSC6900
FREQ35
Frequency 35
BSC6900
FREQ36
Frequency 36
BSC6900
FREQ37
Frequency 37
BSC6900
FREQ38
Frequency 38
BSC6900
FREQ39
Frequency 39
BSC6900
FREQ4
Frequency 4
BSC6900
FREQ40
Frequency 40
BSC6900
FREQ41
Frequency 41
BSC6900
FREQ42
Frequency 42
BSC6900
FREQ43
Frequency 43
BSC6900
FREQ44
Frequency 44
BSC6900
FREQ45
Frequency 45
BSC6900
FREQ46
Frequency 46
BSC6900
FREQ47
Frequency 47
BSC6900
FREQ48
Frequency 48
BSC6900
FREQ49
Frequency 49
BSC6900
FREQ5
Frequency 5
BSC6900
FREQ50
Frequency 50
BSC6900
FREQ51
Frequency 51
BSC6900
FREQ52
Frequency 52
BSC6900
FREQ53
Frequency 53
BSC6900
FREQ54
Frequency 54
BSC6900
FREQ55
Frequency 55
BSC6900
FREQ56
Frequency 56
BSC6900
FREQ57
Frequency 57
BSC6900
FREQ58
Frequency 58
BSC6900
FREQ59
Frequency 59
BSC6900
FREQ6
Frequency 6
BSC6900
FREQ60
Frequency 60
BSC6900
FREQ61
Frequency 61
BSC6900
FREQ62
Frequency 62
BSC6900
FREQ63
Frequency 63
BSC6900
FREQ64
Frequency 64
BSC6900
FREQ7
Frequency 7
BSC6900
FREQ8
Frequency 8
BSC6900
FREQ9
Frequency 9
BSC6900
ADD GCELLFREQ(O ptional) ADD GCELLMAGRP( Frequency Frequency Optional) 9 GBFD-110101 Band Whether to enable the automatic frequency correction algorithm. This parameter is used for the fastmoving handover algorithm. If the parameter is set to YES, the BTS calculates the speed at which an MS leaves or approache s it, and sends the BSC6900 the calculated speed in SET an uplink AFC(Automatic GCELLOTHEXT measurem Frequency (Optional) ent report. GBFD-510101 Correction)
FREQADJ
Frequency Adjust Switch BSC6900
FREQADJVA Frequency Adjust LUE Value BSC6900
Frequency correction parameter. Used for the fastmoving handover algorithm, the value of this parameter must be translated into a binary number. The value consists of 16 bit. The most significant bit indicates whether the parameter is valid. Bits 14 to 8 indicate the level threshold. SET Bits 7 to 0 AFC(Automatic GCELLOTHEXT indicate Frequency (Optional) the GBFD-510101 Correction)
Frequency Band FREQBAND Attribute
BSC6900
Frequency band types of the board This parameter is only applicable to the DDPU/DF CU/DFCB/ DCOM/DD PM/DCBM. The frequency band types for the DTRU, QTRU, DRRU, DRFU, GRRU, MRRU, GRFU, and MRFU cannot be configured and thus are calculated based on ADD the BTSANTFEEDE selected Configuration RBRD(Optional) frequencie MRFD-210301 Management
FREQLOAD GSM900 Band SHARETRAF Traffic Load FTHRSH Share Threshold
BSC6900
FREQLST
Freq Band List
BSC6900
Threshold for load sharing in the 900 MHz frequency band. Assume that an MS supports multiple sub-bands in the 900 MHz frequency band. If the cell load is equal to or less than this threshold, the BSC does not consider the priority levels of the PGSM, EGSM, and R-GSM sub-bands Enhanced SET during Channel GCELLCHMGA channel Assignment D(Optional) assignmen GBFD-111005 Algorithm SET List of GCELLFREQSC frequency Cell Frequency AN(Optional) bands GBFD-112401 Scan
FREQREUS Frequency Reuse EMODE Mode BSC6900
Frequency multiplexin g mode in the TRX. To enable a loose frequency multiplexin g mode such as 4x3 multiplexin g, set this parameter to LOOSE. To enable a tight frequency multiplexin g mode such as 1x3 or 1x1, SET set this GTRXDEV(Opti parameter Configuration onal) to TIGHT. MRFD-210301 Management List of the frequencie s to be measured. This parameter is represente d as a character string where the IDs of the TRXs to be measured are separated by &, such as STR 1&124&95 NCS(Mandatory) 6. GBFD-510901
FREQS
Frequency List
BSC6900
FREQSCAN Frequency Scan RLSTTYPE Result Type
BSC6900
Type of a scanning result in the period from the start of a frequency scanning task to the reporting of the scanning result. Frequency scanning refers to the scanning of an uplink receive level of a cell frequency. The scanning result reflects the strength of frequency SET signals GCELLSOFT(O received Cell Frequency ptional) by the cell. GBFD-112401 Scan
FRINGEHOE N Edge HO Allowed BSC6900
Whether to enable the edge handover algorithm. When an MS makes a call at the edge of a cell, the call may drop if the received signal level is too low. To avoid such a call drop, the edge handover algorithm is involved. When the uplink signal level of the serving cell is less than "Edge HO UL RX_LEV HUAWEI I SET Threshold" Handover GCELLHOBASI or the GBFD-110601 HUAWEI II C(Optional) downlink GBFD-510501 Handover
FRULDTX
FR Uplink DTX
BSC6900
Whether the uplink DTX function is enabled for FR calls. For details, see GSM Rec. 05.08. Uplink DTX is not restricted by the MSC. If this parameter is set to May_Use, the MS can use DTX. If this parameter is set to Shall_Use or Shall_Not_ Discontinuous SET Use, the Transmission GCELLBASICP MS cannot GBFD-114803 (DTX) Uplink ARA(Optional) use DTX. GBFD-115501 AMR FR Compact BTS ADD Slot No. of Automatic BTSAUTOPLAN the father Configuration (Mandatory) BTS GBFD-510701 and Planning
FSN
Slot No. of Father BTS BSC6900
FSN
Slot No. of Father BTS BSC6900
Slot No. for ADD the port of BTSCONNECT( the father Optional) BTS GBFD-111202 O&M of BTS Compact BTS ADD Subrack Automatic BTSAUTOPLAN No. of the Configuration (Mandatory) father BTS GBFD-510701 and Planning
FSRN
Subrack No. of Parent BTS
BSC6900
FSRN
Subrack No. of Father BTS
BSC6900
Subrack ADD No. for the BTSCONNECT( port of the Optional) father BTS GBFD-111202 O&M of BTS Type of the file used for saving O&M of BSC exported GBFD-111203 Security logs MRFD-210305 Management
FT
File Type
BSC6900
EXP LOG(Optional)
FTI
Factor table index BSC6900
ADD Activation ADJMAP(Manda factor table tory) index GBFD-118605 IP QOS ADD Activation TRMFACTOR(M factor table andatory) index GBFD-118605 IP QOS SET BSCABISPRIM AP(Mandatory) Activation factor table index None ATCB
FTI
FTI
None
FULLTOHAL FHOATCBO F-H ATCB Offset FFSET Overlay BSC6900
difference between the overlaid SET and GCELLHOBASI underlaid HUAWEI II C(Optional) subcells GBFD-510501 Handover
FULLTOHAL FHODURATI ON F-H Ho Duration
BSC6900
FULLTOHAL FHOLASTTI ME F-H Ho Last Time BSC6900
Duration of the handover from full rate to half rate. If the cell load is greater than the preset threshold, the calls that meet the conditions for the handover from full rate to half rate are handed over from full rate to SET half rate in GCELLHOBASI this HUAWEI II C(Optional) duration. GBFD-510501 Handover According to the P/N rule, if the conditions for the handover from full rate to half rate are met for P seconds within N seconds, the handover is triggered. This parameter SET specifies GCELLHOBASI the number HUAWEI II C(Optional) P. GBFD-510501 Handover
FULLTOHAL FHOPATHO F-H Pathloss FFSET Offset Overlay
BSC6900
FULLTOHAL FHOPERIOD F-H Ho Period
BSC6900
Path loss difference between the overlaid SET and GCELLHOBASI underlaid HUAWEI II C(Optional) subcells GBFD-510501 Handover Period of the handover from full rate to half rate. If the cell load is greater than the preset threshold, the calls that meet the conditions for the handover from full rate to half rate are handed over in "HF Ho Duration". This parameter specifies the bandwidth to be handed SET over at GCELLHOBASI each HUAWEI II C(Optional) hierarchy GBFD-510501 Handover
FULLTOHAL FHOSTATTI F-H Ho Stat. ME Time
BSC6900
According to the P/N rule, if the conditions for the handover from full rate to half rate are met for P seconds within N seconds, the handover is triggered. This parameter SET specifies GCELLHOBASI the number HUAWEI II C(Optional) N. GBFD-510501 Handover
Forward FWDCONGB congestion W remain bandwidth BSC6900
If the available forward bandwidth is less than or equal to this value, the forward congestion alarm is emitted and forward ADD congestion TRMLOADTH(O control is ptional) striggered. GBFD-118605 IP QOS
Forward FWDCONGC congestion clear LRBW remain bandwidth BSC6900
Forward FWDCONGC congestion clear LRTH remain ratio
BSC6900
If the available forward bandwidth is greater than this value, the forward congestion alarm is cleared and forward ADD congestion TRMLOADTH(O control is ptional) stopped. GBFD-118605 IP QOS If the ratio of available forward bandwidth is greater than this value, the forward congestion alarm is cleared and forward ADD congestion TRMLOADTH(O control is ptional) stopped. GBFD-118605 IP QOS If the ratio of available forward bandwidth is less than or equal to this value, the forward congestion alarm is emitted and forward ADD congestion TRMLOADTH(O control is ptional) triggered. GBFD-118605 IP QOS
Forward FWDCONGT congestion H remain ratio
BSC6900
Forward overload FWDOVLDC congestion clear LRRSVBW remain bandwidth BSC6900
Forward overload FWDOVLDC congestion clear LRTH remain ratio BSC6900
If the available forward bandwidth is greater than this value, the forward overload congestion alarm is cleared and forward ADD overload TRMLOADTH(O control is ptional) stopped. GBFD-118605 IP QOS If the ratio of available forward bandwidth is greater than this value, the forward overload congestion alarm is cleared and forward ADD overload TRMLOADTH(O control is ptional) stopped. GBFD-118605 IP QOS
Forward overload FWDOVLDR congestion SVBW remain bandwidth BSC6900
If the available forward bandwidth is less than or equal to this value, the forward overload congestion alarm is emitted and forward ADD overload TRMLOADTH(O control is ptional) triggered. GBFD-118605 IP QOS
Forward overload FWDOVLDT congestion H remain ratio BSC6900
If the ratio of available forward bandwidth is less than or equal to this value, the forward overload congestion alarm is emitted and forward ADD overload TRMLOADTH(O control is ptional) triggered. GBFD-118605 IP QOS Ratio of reserved forward bandwidth ADD for TRMLOADTH(O handover ptional) user GBFD-118605 IP QOS Reserved forward bandwidth ADD for TRMLOADTH(O handover ptional) user GBFD-118605 IP QOS If the load balance between a 2G cell and a 3G cell is greater than the threshold, load balance is triggered. GBFD-511103
Forward FWDRESVH handover OTH reserved ratio
BSC6900
Forward handover FWDRSVHO reserved BW bandwidth
BSC6900
CS 2G 3G Load G2G3GLdBlc Balance Delta DeltaThrd Threshold
BSC6900
2G Load G2GLoadAdj Adjustment ustCoeff Coefficient
BSC6900
Coefficient used to modulate the load level of a 2G system so that the load level of the 2G system can be SET compared GCELLHOINTE with that of RRATLDB(Optio a 3G nal) system. GBFD-511103
G711_Mode
G711 Mode
BSC6900
G711 Mode. A/U law configurati SET on, 0-A law TCPARA(Option (default), 1al) U law GBFD-118602 A over IP Expected signal receiving strength on the BTS side when GPRS dynamic power SET control is GCELLPSPWP implement ARA(Optional) ed GBFD-119115 Power Control End time for ADD collecting SoftAISSCFG(Optio the offset Synchronized nal) information GBFD-118201 Network Cell load threshold for collecting the offset information . If the load threshold is exceeded, the offset ADD information SoftAISSCFG(Optio is not Synchronized nal) collected. GBFD-118201 Network
GAMMA
GAMMA
BSC6900
GATHET
Offset Information Collection End Time BSC6900
GATHLOD
Load Threshold of Offset Collection
BSC6900
GATHON
Offset Information Collection Switch BSC6900
Whether to ADD collect the SoftAISSCFG(Mand offset Synchronized atory) information GBFD-118201 Network Start time for ADD collecting SoftAISSCFG(Optio the offset Synchronized nal) information GBFD-118201 Network
GATHST
Offset Information Collection Start Time BSC6900
GBRQOS
Support GBR QoS
BSC6900
Obtains the QoS parameter from the Aggregate BSS QoS Profile (ABQP) of packet flow context (PFC) when the MS and the network support the PFC; obtains the QoS parameter from the uplink request originated by the MS or the DL UNITDATA of the SET SGSN. GCELLPSOTHE GBR: RPARA(Optiona guaranteed Streaming l) bit rate. GBFD-119901 QoS(GBR)
GCChk
Group Call Check BSC6900
This parameter specifies whether to enable the VGCS/VB S check function. If the BSS works abnormally , the BTS may periodically send notification messages even if VGCS/VB S is over. In this case, an MS responds continuous Public Voice ly but Group Call cannot Service SET access this Public Voice BSCBASIC(Opti VGCS/VB GBFD-510301 Broadcast onal) S TCH. GBFD-510302 Service Format of the geographic coordinate s. The values include "DEG" and BSC/RNC "SEC". MRFD-210502 Clock
GCDF
GCDF
BSC6900
ADD GPS(Optional)
VGCS Channel GCSCHNAS Assign in SULCHNEN Channel Enable
BSC6900
Whether the assignmen t of channels in overlaid subcells is enabled for the VGCS service in the case of underlaid subcell congestion . Generally, only the channels in underlaid subcells Public Voice can be Group Call assigned Service SET to the Public Voice GCELLGSMR(O VGCS GBFD-510301 Broadcast ptional) service. GBFD-510302 Service
VGCS IM GCSIMPREE Preemption MPTIONEN Enable
BSC6900
Whether direct preemption of the channels of other services is enabled for the VGCS service. If the value of this parameter is NO, a handover is performed for the call whose channel is preempted. If the value is YES, calls on the preempted SET channel GCELLGSMR(O are directly Group Call ptional) released. GBFD-510307 EMLPP
GLOBALRO UTESW
Global route management switch
BSC6900
Global routing manageme nt switch. If this switch is turned on, the IP addresses in the controlled range cannot be SET in the GLOBALROUT same ESW(Mandatory network ) segment. None
None
Diversity GMSKDELA Transmitter Y GMSK Delay
BSC6900
Delay of transmit diversity when GMSK is used. Generally, the parameter is applicable to general fading environme nts. In this case, the transmit diversity can obtain the gain of 3 dB to 5 dB. The fading degrees, however, vary with environme nts. For a fixed delay, different UEs may SET obtain GCELLBASICP different ARA(Optional) gains. In GBFD-114101 GPRS
GPRS
GPRS
BSC6900
Whether the current System SET cell Information GCELLGPRS(M supports GBFD-111101 Sending andatory) GPRS GBFD-114101 GPRS Whether the currently ADD cell GCELLQUICKS supports ETUP(Optional) the GPRS GBFD-114101 GPRS
GPRS
Support GPRS
BSC6900
GPRSCELLR GPRS Cell ESELECTHY Reselect ESTERESIS Hysteresis
BSC6900
Hysteresis value of the cell in the same routing area. When the MS in the ready state reselects a cell, if the original cell and the target cell are in the same routing area, the C2 values of the two cells at the border of the cell are quite different due to radio channel fading. As a result, SET the MS GCELLRESELE frequently CTPARA(Option reselects al) cells. GBFD-114101 GPRS
PDCH Channel GPRSCHPRI Priority Type
BSC6900
EGPRS priority type of the channel If this parameter is set to GPRS, the EDGE MSs cannot use this channel. If this parameter is set to EGPRSNO RCH, the GPRS and EDGE MSs can use this channel at the same priority. If this parameter is set to EGPRSPR ICH, the EDGE SET MSs have GTRXCHAN(Op the priority tional) to use this GBFD-114201 EGPRS
GPRSHCST Threshold of HCS HR Signal Strength BSC6900
Threshold of hierarchica l cell structure (HCS) signal strength. The MS calculates the C31 according to the signal strength and its threshold and selects the adjacent cell during SET cell GCELLSERVPA reselection RA(Optional) . GBFD-114101 GPRS
GPRSPENAL GPRS Penalty TYTIME Time
BSC6900
Timer used when the MS calculates the C2 (used to evaluate the channel quality during cell reselection ). The time information is transmitted in the SET system GCELLNCRESE message LECTPARA(Opti of each onal) cell. GBFD-114101 GPRS Used for the GPRS transmissi on quality statistics. When the transmissi on quality threshold is exceeded, the transmissi on quality SET is regarded GCELLNC2PAR deteriorate A(Optional) d. GBFD-116201
GPRSRXQU GPRS Quality ALLIMIT Threshold
BSC6900
GPRSTEMP GPRS Temporary OFFSET Offset BSC6900
This parameter is used to prevent repeated cell reselection of a fast moving MS. The MS does not select this cell when the duration of maintainin g the BCCH signal channel strength SET does not GCELLNCRESE reach the LECTPARA(Opti penalty onal) time. GBFD-114101 GPRS Synchroniz ation clock adopted when two satellite cards are used together. GPS:Trace GPS only. GLONASS :Trace GLONASS SET only. BTSDGPSBP(O GPSGlona BTS GPS ptional) ss:Trace Synchronizatio SET GPS and n BTSUSCUBP(O GLONASS GBFD-510401 BTS/NodeB ptional) . MRFD-210501 Clock Period for ADD reporting BSC/RNC GPS(Optional) GPS data MRFD-210502 Clock
GPSORGLO NASS GPS or Glonass GPS data report GPSPERIOD period
BSC6900
BSC6900
GRADEACC Grade Access ALLOW Allow
BSC6900
Whether to allow hierarchica l access and to reserve resources SET for highGCELLCHMGB priority Resource ASIC(Optional) MSs GBFD-116001 Reservation Number of the VGCS call that the BTS originates in the timeslot in the TRX in fallback mode. This parameter is represente d in decimal, such as 10000569. If this parameter is set to 100000000 , the channel is not configured SET with any Group Call BTSCHNFALLB fixed group Reliability ACK(Mandatory) call. GBFD-510309 Enhancing
GROUPCAL LNUM1 Group Call Num 1 BSC6900
GROUPCAL LNUM2 Group Call Num 2 BSC6900
Number of the VGCS call that the BTS originates in the timeslot in the TRX in fallback mode. This parameter is represente d in decimal, such as 10000569. If this parameter is set to 100000000 , the channel is not configured SET with any Group Call BTSCHNFALLB fixed group Reliability ACK(Mandatory) call. GBFD-510309 Enhancing
BSC Node GROUPINDE Redundancy X Group Index
BSC6900
Index of the BSC Node Redundan cy Group. It identifies a BSC redundanc y group. The BSC node redundanc y is a function through which two BSCs form a redundanc y group. The two BSCs in a redundanc y group work in 1+1 load sharing mode. When one BSC in a redundanc SET y group is GBSCREDGRP( faulty or all BSC Node Mandatory) the GBFD-113725 Redundancy Name of the BSC SET Node GBSCREDGRP( Redundan BSC Node Optional) cy Group GBFD-113725 Redundancy Maximum number of secondary links that are released in batches when the Abis resource preemption SET occurs on BTSFLEXABISP the Abis ARA(Optional) interface GBFD-117301 Flex Abis
BSC Node GROUPNAM Redundancy E Group Name
BSC6900
GROUPREL Group Release TSNUM TS Number
BSC6900
GRPID
Transport Resource Group No. Transport Resource Group Type
BSC6900
ADD RSCGRP(Mand atory) SET BTSIP(Mandator y)
Transport resource group number
GBFD-118605 IP QOS
GRPT
BSC6900
Type of the ADD transport RSCGRP(Mand resource atory) group GBFD-118605 IP QOS Geographi cal coverage of a simple cell broadcast message. You can run "DSP GSMSCB" to query and obtain the information . This parameter, "Code", and SET "Update" GCELLSBC(Opt uniquely ional) specify a ADD cell GSMSCB(Mand broadcast Simplified Cell atory) message. GBFD-113602 Broadcast Ratio of bandwidth occupied ADD by the CS TRMLOADTH(O service in ptional) the GSM GBFD-118605 IP QOS Standard priority for GSM CS(Circuit Switched) highpriprity SET MSs. 15 is BSCBASIC(Opti the highest onal) priority. GBFD-118605 IP QOS
GS
Geography Scope BSC6900
GSMCSBWR ATE CS ratio
BSC6900
GSMCSUSE RHIGHPRILE GSM CS High V Level Standard
BSC6900
GSMFREQC Serving Band NUM Reporting
BSC6900
Number of neighborin g cells that meet the following conditions: If "MBR" is indicated in a system message, the MS reports the number of neighborin g cells at each frequency band. If the MS reports the number of neighborin g cells at the same frequency band of the serving cell, it can report a maximum of the SET value of Multi-band GCELLCCUTRA this Sharing One NSYS(Optional) parameter. GBFD-114401 BSC Whether to support the cell reselection from the GSM network to the TD SET network in GCELLPSOTHE the packet GSM/TDRPARA(Optiona transmissi SCDMA l) on mode GBFD-114302 Interoperability
GSM-to-TD Cell GSMTOTDA Reselection LLOWED Allowed
BSC6900
GUARDTYP ICMP type which E will be guarded BSC6900
Packet type ADD against the ICMPGUARD(M ICMP andatory) attack GBFD-111202 O&M of BTS When the BTS is accessed from the public network, the BTS security network IP ADD address BTSAUTOPLAN must be (Optional) configured. GBFD-118601 Abis over IP IP address of the BTS security gateway. This parameter needs to be configured when the BTS connects to the BSC6900 through the SET public BTSIP(Optional) network. GBFD-118601 Abis over IP Whether to support CS half rate data Half Rate services GBFD-113401 Speech
GWIP
BTS SeGW IP Address
BSC6900
GWIP
BTS Security Gateway IP Address
BSC6900
HalfRateData Support Half Rate Support Data Service BSC6900
HALFTOFUL LATCBOFFS H-F ATCB Offset ET Overlay BSC6900
ATCB difference between the overlaid SET and GCELLHOBASI underlaid HUAWEI II C(Optional) subcells GBFD-510501 Handover Duration of the handover from half rate to full rate. If the cell load is less than the preset threshold, the calls that meet the conditions for the handover from half rate to full rate are handed over from half rate to SET full rate in GCELLHOBASI this HUAWEI II C(Optional) duration. GBFD-510501 Handover
HALFTOFUL LHODURATI ON H-F Ho Duration
BSC6900
HALFTOFUL LHOLASTTI ME H-F Ho Last Time BSC6900
According to the P/N rule, if the conditions for the handover from half rate to full rate are met for P seconds within N seconds, the handover is triggered. This parameter SET specifies GCELLHOBASI the number HUAWEI II C(Optional) P. GBFD-510501 Handover
HALFTOFUL LHOPATHOF H-F Pathloss FSET Offset Overlay
BSC6900
HALFTOFUL LHOSTATTI H-F Ho Stat. ME Time
BSC6900
Path loss difference between the overlaid SET and GCELLHOBASI underlaid HUAWEI II C(Optional) subcells GBFD-510501 Handover According to the P/N rule, if the conditions for the handover from half rate to full rate are met for P seconds within N seconds, the handover is triggered. This parameter SET specifies GCELLHOBASI the number HUAWEI II C(Optional) N. GBFD-510501 Handover
HAVETT1
Antenna Tributary 1 Flag BSC6900
Whether the towerO&M of BTS top Connection amplifier is with TMA SET installed (Tower BTSRXUBP(Opt on antenna GBFD-111202 Mounted ional) tributary 1. MRFD-210601 Amplifier) Whether the towerO&M of BTS top Connection amplifier is with TMA SET installed (Tower BTSRXUBP(Opt on antenna GBFD-111202 Mounted ional) tributary 2. MRFD-210601 Amplifier) Heartbeat interval when the ADD SCTP SCTPLNK(Optio server is nal) idle
HAVETT2
Antenna Tributary 2 Flag BSC6900
HBINTER
Heartbeat interval BSC6900
GBFD-118602 A over IP
HCN
Head Cabinet No. BSC6900
Number of the cabinet where the main board of the RXU ADD chain or BTSRXUCHAIN ring is (Mandatory) located. GBFD-111202 O&M of BTS According to the P/N rule, if the conditions for the handover to a different micro cell due to fast movement are met in P of N measurem ent reports, the handover is triggered. This parameter ADD specifies G2GNCELL(Opti the number HUAWEI II onal) P. GBFD-510501 Handover
HCSLASTTI HCS HO Valid ME Time
BSC6900
HCSSTATTI HCS HO Watch ME Time
BSC6900
According to the P/N rule, if the conditions for the handover to a different micro cell due to fast movement are met in P of N measurem ent reports, the handover is triggered. This parameter ADD specifies G2GNCELL(Opti the number HUAWEI II onal) N. GBFD-510501 Handover Threshold for interrupting the power supply to the TRXs. If the BTS works with the battery power supply, when the battery voltage is less than this threshold, the BTS interrupts the power supply to the TRXs to protect the lowerSET level BTSs BTSBAT(Option from being al) affected. GBFD-111202 O&M of BTS
HIERPWRPA Hierarchical RA1 Power Para1
BSC6900
HIERPWRPA Hierarchical RA2 Power Para2
BSC6900
Threshold for interrupting the power supply to the TMU. If the BTS works with the battery power supply, when the battery voltage is less than this threshold, the BTS interrupts SET the power BTSBAT(Option supply to al) the TMU. GBFD-111202 O&M of BTS Type of a high frequency type supported by the BSC6900, Frequencie s on DCS1800: 512-885 Frequencie SET s on BSCBASIC(Opti PCS1900: Frequency onal) 512-810 GBFD-110101 Band
HiFreqBandS Support High upport Frequency Band
BSC6900
HIGHESTPRI ORITQUALFI Highest Priority RST for Quality First
BSC6900
Full rate TCHs are assigned preferential ly to the MSs with priority levels equal to or less than this threshold, except when the MSs request SET only half or GCELLCHMGB full rate ASIC(Optional) TCHs. GBFD-115001
Highest-Priority HIGHLEVPR MSs Rapid EEM Preemption
BSC6900
This parameter specifies whether the MS with priority level 1 directly releases the preempted call. When this parameter is set to Yes, the access delay of MSs with high priorities is ensured and the access rate of MSs with high priorities is increased, but the preempted call drops. GBFD-115001
HIGHPRIUS ERQUALFIR Highest Priority ST User Quality First BSC6900
Whether to enable the prioritybased SET channel GCELLCHMGB assignmen ASIC(Optional) t algorithm GBFD-115001
HIGHTEMPL OADPWROF High Temp Load F Power Off
BSC6900
Whether to enable load poweroff against SET high BTSAPMUBP(O temperatur ptional) e GBFD-111202 O&M of BTS Whether to consider history priority records during channel assignmen t. If this parameter is set to YES, the history priority records are considered . If this parameter is set to NO, the history priority records are SET not GCELLCHMGA considered D(Optional) . GBFD-111005 Maximum SET History PWDPOLICY(O Password ptional) Numbers.
HISPRIOALL History Record OW Priority Allowed
BSC6900
Maximum History HISTORYPW Password DNUM Numbers BSC6900
HMCDTM
Support HMC DTM
BSC6900
HOALGOPE Pref. Subcell in RMLAY HO of Intra-BSC
BSC6900
Whether the cell supports the MS with the SET DTM multiGCELLGPRS(O timeslot ptional) capability GBFD-119404 HMC DTM Whether to assign a channel in the overlaid or underlaid subcell in the case of the intraBSC incoming handover to the concentric cell. If this parameter is set to SysOpt, the measured BCCH of the target cell is included in the intraBSC intercell handover request message. SET Then, the GCELLHOIUO( BSC Optional) compares GBFD-113201 Concentric Cell
Handover HOBTWNOT Between HOPALLOW Operators Allow
BSC6900
Whether to allow handover between different operators. If the BSC6900 supports RAN sharing, MSs in a cell of this operator can be handed over to a cell of other ADD operators, GCNOPERATO or vice R(Optional) versa. GBFD-118701 RAN Sharing If the downlink received signal level of a neighbor cell is greater than "Min DL Level on Candidate Cell" plus "Min Access Level Offset", the neighbor cell can be listed in the candidate HUAWEI I SET cell queue Handover GCELLHOBASI for GBFD-110601 HUAWEI II C(Optional) handover. GBFD-510501 Handover
HOCDCMIN DWPWR
Min DL Level on Candidate Cell
BSC6900
HOCDCMIN UPPWR
Min UL Level on Candidate Cell
BSC6900
If the uplink received signal level of a neighbor cell is greater than "Min UL Level on Candidate Cell" plus "Min Access Level Offset", the neighbor cell can be listed in the candidate HUAWEI I SET cell queue Handover GCELLHOBASI for GBFD-110601 HUAWEI II C(Optional) handover. GBFD-510501 Handover Type of indexing SET the target FHO(Mandatory) cell Unique name of SET the target FHO(Mandatory) cell SET GCELLHOBASI C(Optional) SET GCELLHOEMG( Optional) SET GCELLHOFITP EN(Optional) SET GCELLHOIUO( Optional)
HOCELLIDT Specify Index of YPE Cell Handover to BSC6900
HOCELLNA ME
Cell Name of Handover to
BSC6900
HOCTRLSWI Current HO TCH Control Algorithm BSC6900
Whether to use handover algorithm generation 1 or 2 HUAWEI I currently GBFD-110601 Handover
Handover HODIRFORE Direction CASTEN Forecast Enable
BSC6900
Handover direction forcast switch. When this parameter is set to YES, the BSC6900 can forecast the handover direction of the call in fast handover so that the best target cell can be SET selected GCELLHOFAST for Chain Cell (Optional) handover. GBFD-510103 Handover This parameter indicates P in the P/N rule for MS handover direction forcast. P/N rule: Among N handovers, the MS is handed over to Class B chain neighborin g cell for successive ly P times, then the BSC6900 determines that the MS is moving to the Class SET B chain GCELLHOFAST neighborin Chain Cell (Optional) g cell. GBFD-510103 Handover
Handover Direction HODIRLAST Forecast Last TIME Times
BSC6900
Handover Direction HODIRSTATI Forecast Statistic ME Times BSC6900
This parameter indicates N in the P/N rule for MS handover direction forcast. P/N rule: Among N handovers, the MS is handed over to Class B chain neighborin g cell for successive ly P times, then the BSC6900 determines that the MS is moving to the Class SET B chain GCELLHOFAST neighborin Chain Cell (Optional) g cell. GBFD-510103 Handover Fast handover can be triggered only when the downlink level of the serving cell SET is less than GCELLHOFAST this Fast Move (Optional) parameter. GBFD-510102 Handover
Quick Handover HODOWNTR Down Trigger IGE Level
BSC6900
FDD 3G Better Cell HO Valid HODURT3G Time
BSC6900
TDD 3G Better HODURT3G Cell HO Valid TDD Time
BSC6900
According to the P/N rule, if the conditions for the handover to a better 3G cell are met for P seconds within N seconds, the handover is triggered. This parameter ADD specifies G3GNCELL(Opti the number onal) P. According to the P/N rule, if the conditions for the handover to a better 3G cell are met for P seconds within N seconds, the handover is triggered. This parameter ADD specifies G3GNCELL(Opti the number onal) P.
Ec/No Threshold HOECNOTH for Better 3G Cell 3G HO BSC6900
The 3G better cell handover can be triggered only when the Ec/No of a neighborin g 3G cell is greater than this GSM/WCDMA SET threshold Interoperability GCELLHOUTR for a GSM/TDANFDD(Optional period of GBFD-114301 SCDMA ) time. GBFD-114302 Interoperability According to the P/N rule, if the conditions for fast handover are met in P of N measurem ent reports, the handover is triggered. This parameter ADD specifies G2GNCELL(Opti the number Fast Move onal) P. GBFD-510102 Handover
HOLASTTIM Quick Handover E Last Time
BSC6900
HOMOD
Handover Scope BSC6900
Type of handover in terms of connection transfer between channels SET or between FHO(Mandatory) cells GBFD-111203 O&M of BSC
HOOFFSET
Quick Handover Offset
BSC6900
Handover to HOOLRXLEV Overlayer RxLev OFFSET Offset BSC6900
Fast handover can be triggered only when the path loss difference between the serving cell and a neighbor ADD cell on the GEXT2GCELL( chain is Optional) equal to or SET greater GCELLHOFAST than this GBFD-110601 (Optional) parameter. GBFD-510501 If the cell is an enhanced concentric cell, this parameter with the current downlink received signal level and "UtoO HO Received Level Threshold" determines whether to assign a channel in the underlaid subcell to the intraBSC incoming handover to the concentric cell or intraBSC interSET cell GCELLCHMGA handover. D(Optional) If the cell is GBFD-113201
HUAWEI I Handover HUAWEI II Handover
Concentric Cell
HOOPTSEL
Inter-rat HO Preference
BSC6900
This parameter specifies whether a 2G cell or to a 3G cell is preferential ly selected as the target cell for handover. When this parameter is set to Pre_2G_C ell, the BSC preferential ly selects a 2G candidate cell as the target cell for SET handover. GCELLHOUTR When this ANFDD(Optional parameter ) is set to SET Pre_3G_C HUAWEI I GCELLHOUTR ell, the Handover ANTDD(Optiona BSC GBFD-110601 HUAWEI II l) preferential GBFD-510501 Handover
Inter UL/OL HOPENALTY Subcells HO TIME Penalty Time
BSC6900
An MS cannot be handed over from the underlaid subcell to the overlaid subcell in this duration after the MS is handed over from the overlaid subcell to the underlaid SET subcell GCELLHOEDB successfull Enhanced DualPARA(Optional) y. GBFD-114402 Band Network Index of the frequency hopping data, used for a TRX to locate the ADD frequency GCELLMAGRP( hopping Mandatory) sequence GBFD-113701 Logical SET number of GCELLMAIOPL the MA AN(Mandatory) group GBFD-117002
HOPINDEX
Hop Index
BSC6900
Frequency Hopping (RF hopping, baseband hopping) IBCA (Interference Based Channel Allocation)
HOPINDEX
Hop Index
BSC6900
HOPMODE
Hop Mode
BSC6900
Implement ation mode ADD of GCELLMAGRP( frequency Mandatory) hopping GBFD-113701
Power Boost HOPOWERB before HO OOST Enabled or Not
BSC6900
Whether to enable power boost before handover. When the receive level of an MS drops rapidly, a handover occurs. In this case, the BSC6900 cannot adjust the transmit power of the MS and the BTS in time. The MS may fail to receive a handover command, thus leading to SET a call drop. GCELLOTHBAS If the value BTS power lift IC(Optional) of this GBFD-117101 for handover
HOPRETH2 G
HO Preference Threshold for 2G Cell BSC6900
If the receive level of the neighborin g 2G cell that ranks the first in the candidate cell list is equal to or smaller than this threshold, the BSC preferential ly selects a neighborin g 3G cell as the handover target cell. Otherwise, the BSC SET preferential GCELLHOUTR ly selects ANFDD(Optional a ) neighborin SET g 2G cell HUAWEI I GCELLHOUTR as the Handover ANTDD(Optiona handover GBFD-110601 HUAWEI II l) target cell. GBFD-510501 Handover If this parameter is set to ON, the channel on a single frequency of an MA group is allocated to an MS with the non-FH attribute. GBFD-113701
HopSingleFre Hop Group Single qOptSwitch Freq Optimization BSC6900
HOPTRXHS Hop TRX Group N HSN
BSC6900
Hoping sequence number (HSN) of a hopping antenna group. If the value of this parameter is 0, the services over a TRX are adjusted to other TRXs in the hopping antenna group in sequence. If this parameter is set to a value from 1 to 63, the services over a TRX are adjusted to other TRXs ADD in the Antenna GCELLHOPANT hopping Frequency GRP(Optional) antenna GBFD-113703 Hopping
HOPTRXIND Hop TRX Group EX Index
BSC6900
TRX index that a hopping antenna index correspond s to. A hopping antenna enables signals of multiple TRXs to switch between several antennas instead of fixing an antenna for a TRX. This reduces the effect of Rayleigh fading on ADD signals of GCELLHOPANT some Antenna GRP(Mandatory frequencie Frequency ) s. GBFD-113703 Hopping
HOPTYPE
Hop Type
BSC6900
Frequency hopping mode of the TRX. Frequency hopping assists in interferenc e averaging and frequency diversity. If this parameter is set to RF_FH, the TX and RX parts of the TRX take part in the frequency hopping. In this case, the number of hopping frequencie s can exceed the number of SET TRXs in GTRXHOP(Opti the cell. If onal) this GBFD-113701
HOPUNISHV Quick Handover ALUE Punish Value
BSC6900
To avoid ping-pong handover, the received signal of the original serving cell is decreased by "Quick handover punish value" in "Quick ADD handover GEXT2GCELL( punish Optional) time" after HUAWEI I SET fast Handover GCELLHOFAST handover GBFD-110601 HUAWEI II (Optional) succeeds. GBFD-510501 Handover
BSC HO Protect HOREFTMR Time
BSC6900
Time for reserving the handover reference for one of the two BSCs that ADD collect the SoftAISSCFG(Optio offset Synchronized nal) information GBFD-118201 Network
RSCP Threshold HORSCPTH for Better 3G Cell 3G HO BSC6900
The 3G better cell handover is triggered only when the RSCP of a SET neighborin GCELLHOUTR g 3G cell is ANFDD(Optional greater ) than this GSM/WCDMA SET threshold Interoperability GCELLHOUTR for a GSM/TDANTDD(Optiona period of GBFD-114301 SCDMA l) time. GBFD-114302 Interoperability Whether an HO REQ ACK message contains the information element Speech Version during an SDCCH handover. If a signaling channel handover between BSCs fails, the value of this parameter SET may need A Interface MSGSOFTPAR to be Protocol A(Optional) adjusted. GBFD-111804 Process
Speech VER in HoSdcchSpe SDCCH HO REQ echVer ACK BSC6900
HOSTAT3G
FDD 3G Better Cell HO Watch Time
BSC6900
According to the P/N rule, if the conditions for the handover to a better 3G cell are met in P of N measurem ent reports, the handover is triggered. This parameter HUAWEI I ADD specifies Handover G3GNCELL(Opti the number GBFD-110601 HUAWEI II onal) N. GBFD-510501 Handover According to the P/N rule, if the conditions for the handover to a better 3G cell are met in P of N measurem ent reports, the handover is triggered. This parameter HUAWEI I ADD specifies Handover G3GNCELL(Opti the number GBFD-110601 HUAWEI II onal) N. GBFD-510501 Handover
TDD 3G Better HOSTAT3GT Cell HO Watch DD Time
BSC6900
HOSTATICTI Quick Handover ME Static Time
BSC6900
HOSTTYPE
The host type of signalling point
BSC6900
According to the P/N rule, if the conditions for fast handover are met in P of N measurem ent reports, the handover is triggered. This parameter ADD specifies G2GNCELL(Opti the number Fast Move onal) N. GBFD-510102 Handover Indicates the host type of the signalling point. When the BSC node redundanc y feature is enabled, the primary BSC and the secondary BSC each must be configured with a signaling point coded in the same mode. The host type of the signaling point of the primary BSC is set to "PRIMHOS T", and the ADD host type BSC Node OPC(Optional) of the GBFD-113725 Redundancy
HOSTTYPE
HostType
BSC6900
HOTHRES
Inter-layer HO Threshold
BSC6900
Host type SET of an IP BSC Node BTSIP(Optional) BTS GBFD-113725 Redundancy Handover threshold during the handovers between cells on different layers or of different priorities. This value is used to suppress inter-layer ping-pong handovers. Inter-layer handover threshold of the serving cell = "Interlayer HO threshold" "Inter-layer HO Hysteresis" ; ADD Inter-layer GEXT2GCELL( handover Optional) threshold HUAWEI I SET of a Handover GCELLHOBASI neighborin GBFD-110601 HUAWEI II C(Optional) g cell = GBFD-510501 Handover Fast handover can be triggered only when the uplink signal level of the serving cell SET is less than GCELLHOFAST this Fast Move (Optional) parameter. GBFD-510102 Handover
Quick Handover HOUPTRIGE Up Trigger Level
BSC6900
HPANTMOD Cell Antenna E Hopping
BSC6900
Whether to enable the TRX to support antenna hopping In a GSM cell, the BCCH broadcasts the frequency, frame number, system information , and paging group. If an MS is in an unfavorabl e position or the antenna of the main TRX that carries the BCCH fails, the MS SET receives Antenna GCELLHOPANT poor Frequency (Optional) broadcast GBFD-113703 Hopping
HPANTMOD Cell Antenna E Hopping
BSC6900
Whether to enable the TRX to support antenna hopping In a GSM cell, the BCCH broadcasts the frequency, frame number, system information , and paging group. If an MS is in an unfavorabl e position or the antenna of the main TRX that carries the BCCH fails, the SET MS GCELLHOPANT receives Antenna QUICKSETUP( poor Frequency Mandatory) broadcast GBFD-113703 Hopping The number of the optical port of the main board ADD in the RXU BTSRXUCHAIN chain or (Mandatory) ring. GBFD-111202 O&M of BTS
HPN
Head Port No.
BSC6900
HPRIOR
Highest Priority
BSC6900
Maximum priority level of an MS that can use reserved channel resources. If the priority level of an MS is greater than this parameter, the MS is considered a lowpriority MS. If the priority of an MS is equal to or less than this threshold, the MS is SET considered GCELLCHMGB a highResource ASIC(Optional) priority MS. GBFD-116001 Reservation
HPVFLAG
Hierarchical Power-off Config. Enabled BSC6900
Whether to enable the configurati on of power system parameters . In multimode scenario, the value of this parameter in one mode must be the same as the value SET of the BTSAPMUBP(O correspond ptional) ing SET parameter O&M of BTS BTSDPMUBP(O in another GBFD-111202 BTS Power ptional) mode. GBFD-111601 Management Load power-off voltage threshold. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter O&M of BTS BTSDPMUBP(O in another GBFD-111202 BTS Power ptional) mode. GBFD-111601 Management
HPVTHD
Load Power-off Voltage
BSC6900
HRATESPT
Support Half Rate BSC6900
This parameter determines whether the BSC6900 supports new establishm ent causes of an MS in the initial access request. This parameter does not Half Rate affect the Speech SET half-rate System GCELLCCCH(O function of GBFD-113401 Information ptional) cells. GBFD-111101 Sending Whether the downlink DTX function is enabled for half rate (HR) calls. This function is also restricted by the DTX switch in the MSC. If the MSC allows the downlink DTX for calls and the value of this parameter( HRDLDTX ) is YES, Discontinuous the Transmission downlink (DTX) DTX is Downlink SET enabled for GBFD-114801 Half Rate GCELLBASICP HR calls of GBFD-113401 Speech ARA(Optional) cells. GBFD-115502 AMR HR
HRDLDTX
HR Use Downlink DTX BSC6900
HRIUOLDRA Load of UL-OL TESELALLO Cells Rate Select W Allowed BSC6900
Whether to enable the BSC to assign half or full rate channels to MSs according to the channel seizure ratio in the overlaid SET and GCELLCHMGA underlaid D(Optional) subcells GBFD-113201 Concentric Cell Whether the uplink DTX function is enabled for HR calls. For details, see GSM Rec. 05.08. Uplink DTX is not restricted by the MSC. If this parameter is set to May_Use, the MS can use DTX. If this parameter is set to Shall_Use Discontinuous or Transmission Shall_Not_ (DTX) Uplink SET Use, the GBFD-114803 Half Rate GCELLBASICP MS cannot GBFD-113401 Speech ARA(Optional) use DTX. GBFD-115502 AMR HR
HRULDTX
HR Uplink DTX
BSC6900
HSN
HSN
BSC6900
Hopping sequence number (HSN), indicating 64 types of frequency hopping sequences . If this parameter is set to 0, the frequency hopping is performed in sequence. If this parameter is set to a value from 1 to 63, the frequency hopping is performed in a pseudorandom manner, that is a ADD disciplinary GCELLMAGRP( random Optional) manner. GBFD-113701
HSN
Head Slot No.
BSC6900
Number of the slot where the main board of the RXU chain or ring is located. The slot No. is ADD unique in BTSRXUCHAIN the same (Mandatory) BTS. GBFD-111202 O&M of BTS
HSNSW
HSN Modification Switch BSC6900
Whether dynamic use of HSNs is enabled. If the functions of frequency hopping and Flex MAIO are enabled in a cell and the value of this parameter is ON, adjacentchannel interferenc e between ADD channels GCELL(Optional can be ) reduced. GBFD-117001 Flex MAIO Number of the subrack where the main board of the RXU chain or ring is located. The subrack No. is ADD unique in BTSRXUCHAIN the same (Mandatory) BTS. GBFD-111202 O&M of BTS Bidirection al ADD Forwarding IP Fault BTSBFD(Manda Detection Detection tory) Hop Type. GBFD-118609 Based on BFD
HSRN
Head Subrack No.
BSC6900
HT
Hop Type
BSC6900
HTCP
High Temperature Critical Point
BSC6900
If the ambient temperatur e is higher than "High Temperatu re Critical Point", the temperatur e control system controls the difference between the inlet and outlet temperatur es. In multimode scenario, the value of this parameter in one mode must be the same as the value of the SET correspond BTSDHEUBP(O ing Faulty ptional) parameter MRFD-210304 Management
HTDO
High Temperature Delta Tout
BSC6900
If the outlet temperatur e is higher than "High Temperatu re Critical Point" and the difference between the outlet temperatur e and ambient temperatur e reaches the value of this parameter, the temperatur e control system controls the difference between the inlet and outlet temperatur es. SET In multiBTSDHEUBP(O mode Faulty ptional) scenario, MRFD-210304 Management Whether to enable battery power-off against SET high BTSAPMUBP(O temperatur Faulty ptional) e. MRFD-210304 Management Humidity ADD alarm Faulty EMU(Optional) switch MRFD-210304 Management
HTSDF
High Temperature Shutdown Flag
BSC6900
Enable Humidity HUM_MASK Alarm Reporting
BSC6900
HUM_THD_ HIGH
Upper Limit of Humidity Alarm
BSC6900
ADD EMU(Optional)
Upper limit of humidity. When the humidity exceeds the upper limit, a humidity alarm is Faulty reported. MRFD-210304 Management Lower limit of humidity. When the humidity is lower than the lower limit, a humidity alarm is Faulty reported. MRFD-210304 Management
HUM_THD_L Lower Limit of OW Humidity Alarm
BSC6900
ADD EMU(Optional)
HUMALAMR THRESHOL Upper Threshold DH of Humidity Alarm BSC6900
When the ambient humidity of the APMU is greater than the value of this parameter, the BTS reports an overhigh ambient humidity alarm. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSAPMUBP(O in another Faulty ptional) mode. MRFD-210304 Management
HUMALAMR THRESHOL Upper Threshold DH of Humidity Alarm BSC6900
When the ambient humidity is greater than the value of this parameter, the BTS reports an overhigh ambient humidity alarm. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another Faulty ptional) mode. MRFD-210304 Management
HUMALAMR THRESHOL Lower Threshold DL of Humidity Alarm BSC6900
When the ambient humidity of the APMU is less than the value of this parameter, the BTS reports an overlow ambient humidity alarm. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSAPMUBP(O in another Faulty ptional) mode. MRFD-210304 Management
HUMALAMR THRESHOL Lower Threshold DL of Humidity Alarm BSC6900
When the ambient humidity is less than the value of this parameter, the BTS reports an overlow ambient humidity alarm. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another Faulty ptional) mode. MRFD-210304 Management
HYSON
Hysteresis for On BSC6900
Delay for which the BTS waits SET to switch BTSAIRCON(O on the air ptional) conditioner GBFD-111202 O&M of BTS
IARXTMR
Inactive RX timer BSC6900
IASUDURAT Duration
BSC6900
This timer is started after a connection is establishe d successfull y. If a detection message is not received when this timer expires, the SET connection A Interface SCCPTMR(Opti will be Protocol onal) released. GBFD-111804 Process STR Duration in TRANSPERFTS IASU BTS Test T(Mandatory) mode GBFD-111207 Function
IASUPORT
Port No.
BSC6900
Port number in IASU mode. For the BTS3002C , the port number cannot be STR set to TRANSPERFTS "E1PORT3 T(Mandatory) ". GBFD-111202 O&M of BTS Type of the transmissi STR on board in TRANSPERFTS IASU T(Mandatory) mode GBFD-111202 O&M of BTS
IASUSLCTT Transmission MU Board Type
BSC6900
IATXTMR
Inactive TX timer BSC6900
IBCA AMR FR IBCAAFRSO Soft Block FTBLKTHRD Threshold
BSC6900
This timer is started after a connection is establishe d successfull y. When this timer expires, a detection message SET will be sent A Interface SCCPTMR(Opti to the peer Protocol onal) end. GBFD-111804 Process Minimum C/I ratio that IBCA AMR FR services allow. An idle channel can be assigned to such a service only when the C/I ratio of the idle channel is greater than this threshold. In addition, a new call associated with such a service can be establishe d only when the call does not IBCA SET decrease (Interference GCELLCHMGA the C/I Based Channel D(Optional) ratio of the GBFD-117002 Allocation)
IBCA AMR HR IBCAAHRSO Soft Block FTBLKTHRD Threshold
BSC6900
Minimum C/I ratio that IBCA AMR HR services allow. An idle channel can be assigned to such a service only when the C/I ratio of the idle channel is greater than this threshold. In addition, a new call associated with such a service can be establishe d only when the call does not SET decrease GCELLCHMGA the C/I D(Optional) ratio of the GBFD-117002 Whether to SET enable the GCELLCHMGA IBCA D(Optional) algorithm GBFD-117002
IBCA (Interference Based Channel Allocation) IBCA (Interference Based Channel Allocation)
IBCAALLOW ED IBCA Allowed
BSC6900
IBCAASSWA ITMEASURE IBCA Assign RPTTIME Waiting Mr Time
BSC6900
Length of the timer for a new call to wait for the measurem ent report (MR) on the signaling channel when dynamic measurem ent of the BA2 list is enabled during assignmen t. If this parameter is set to 0, dynamic measurem ent of the BA2 list is not enabled SET during GCELLCHMGA assignmen D(Optional) t. GBFD-117002
IBCA (Interference Based Channel Allocation)
IBCACALLIN FOFILTERLE IBCA Call N Information Filter BSC6900
Number of measurem ent reports sampled for averaging path loss. A single measurem ent report may not reflect the actual network situations accurately. Therefore, the BSC needs to average the measured values in several successive measurem ent reports to reflect SET the radio GCELLCHMGA environme D(Optional) nt. GBFD-117002
IBCACALLS IBCA Set-up Call OFTBLOCKT Soft Block HOFFSET Threshold Offset BSC6900
When the IBCA algorithm is enabled, this parameter is used to calculate the actual soft blocking threshold of an existing call. The formula is as follows: Actual soft blocking threshold of an existing call = Configured soft blocking threshold of an existing call - IBCA Set-up Call SET Soft Block GCELLCHMGA Threshold D(Optional) Offset. GBFD-117002
IBCACALLTA Target CIR Offset RGETCIROF of IBCA Set-up FSET Call BSC6900
When the IBCA algorithm is enabled, this parameter is used to calculate the target CIR of an existing call. The formula is as follows: Target CIR of an existing call = Target CIR in use + Target CIR SET Offset of GCELLCHMGA IBCA SetD(Optional) Up Call. GBFD-117002
IBCADLPAT IBCA Downlink HLOSSOFF Path Loss Offset BSC6900
Difference between uplink and downlink path losses, which is used to estimate the downlink path loss of a call when the downlink path loss cannot be computed directly according to a measurem ent report. This parameter is configured according to the combined loss and SET hierarchica GCELLCHMGA l dualD(Optional) antenna GBFD-117002
IBCADYNCM EASURENC ELLALLOWE D
IBCA Dyn Measure Neighbour Cell Flag
BSC6900
Whether to measure the IBCA neighbor cells of the serving cell dynamicall y. If the dynamic measurem ent is enabled, when a call uses a channel, the BSC sends the SACCH Modify message to modify the frequencie s in the BA2 table in System Information 5, 5bis, and 5ter to the frequencie ADD s at which G2GNCELL(Opti the IBCA onal) neighbor GBFD-117002
IBCAEHOAS SWAITMEAS URERPTTIM IBCA Urgent HO E Waiting Mr Time
BSC6900
Length of the timer for a call to measure the path loss in the neighborin g cell with strong interferenc e of the target cell. The call to be handed over needs to measure the path loss before initiating the handover to the target cell when dynamic measurem ent of the BA2 list is enabled during the emergency SET handover. GCELLCHMGA When this D(Optional) parameter GBFD-117002
IBCAFLEXTS IBCA Flexible CALLOWED TSC Allowed
BSC6900
Whether the IBCA flexible TSC function is enabled. When this parameter is set to NO, the flexible TSC function is disabled and the configured TSC is used. When the BTS supports Flex TSC and this parameter is set to YES, the flexible SET TSC GCELLCHMGA function is D(Optional) enabled. GBFD-117002
IBCAFORCE IBCA Forced BTS DBTSSYNCA Synchronization LLOWED Allowed BSC6900
Whether the IBCA forced BTS synchroniz ation is allowed. When this parameter is set to YES, the synchroniz ation procedure is performed even though the BTSs are insynchron ous. When this parameter is set to NO, the existing procedure, either the synchroniz ation procedure or the outSET ofGCELLCHMGA synchroniz D(Optional) ation GBFD-117002
IBCA FR/EFR IBCAFRSOF Soft Block TBLKTHRD Threshold
BSC6900
Minimum C/I ratio that IBCA FR/EFR services allow. An idle channel can be assigned to such a service only when the C/I ratio of the idle channel is greater than this threshold. In addition, a new call associated with such a service can be establishe d only when the call does not SET decrease GCELLCHMGA the C/I D(Optional) ratio of the GBFD-117002
IBCAHOASS WAITMEASU IBCA HO Waiting RERPTTIME Effective Mr Time BSC6900
Length of the timer for a call to wait for other valid MRs after receiving the first valid MR of the target cell if dynamic measurem ent of the BA2 list is enabled during handover. When this parameter is set to 0, the call does not wait for other MRs after receiving SET the first GCELLCHMGA MR of the D(Optional) target cell. GBFD-117002
IBCAHRSOF IBCA HR Soft TBLKTHRD Block Threshold
BSC6900
IBCAICDMR ELEVOFFSE IBCA ICDM Initial T Level Offset BSC6900
Minimum C/I ratio that IBCA HR services allow. An idle channel can be assigned to such a service only when the C/I ratio of the idle channel is greater than this threshold. In addition, a new call associated with such a service can be establishe d only when the call does not IBCA SET decrease (Interference GCELLCHMGA the C/I Based Channel D(Optional) ratio of the GBFD-117002 Allocation) In the ICDM matrix algorithm, the signal strength (063) is divided into 10 levels. The signal strength that is smaller than or equal to the value of this IBCA SET parameter (Interference GCELLCHMGA is at the Based Channel D(Optional) initial level. GBFD-117002 Allocation)
IBCAICDMS IBCA ICDM WITCH Switch
BSC6900
Whether to enable the ICDM algorithm for the cell. The ICDM algorithm helps to improve the precision in estimating the path loss of an IBCA neighbor cell and to increase the efficiency SET of the GCELLCHMGA IBCA D(Optional) algorithm. GBFD-117002 Period of information exchange between the BSC boards. The information helps to estimate the C/I ratio for the IBCA algorithm. GBFD-117002
IBCAINBSCI IBCA Info Report NFORPTPR Period Within D BSC BSC6900
IBCAINITPC IBCA Init. Power RXLEVDLOF Control FSET RexLevDL Offset BSC6900
Adds a specified offset to the downlink target receive level when power control algorithm III is used to calculate the initial transmit power of a SET BTS in the GCELLCHMGA IBCA D(Optional) function GBFD-117002 Adds a specified offset to the uplink target receive level when power control algorithm III is used to calculate the initial transmit power of SET an MS in GCELLCHMGA the IBCA D(Optional) function GBFD-117002
IBCAINITPC IBCA Init. Power RXLEVULOF Control FSET RexLevUL Offset BSC6900
IBCAINITPC IBCA Init. Pwr RXQUALDLO Ctrl Rx Qual DL FFSET Offset
BSC6900
Adds a specified offset to the downlink target receive quality when power control algorithm III is used to calculate the initial transmit power of a SET BTS in the GCELLCHMGA IBCA D(Optional) function GBFD-117002 Adds a specified offset to the uplink target receive quality when power control algorithm III is used to calculate the initial transmit power of SET an MS in GCELLCHMGA the IBCA D(Optional) function
IBCAINITPC IBCA Init. Pwr RXQUALULO Ctrl Rx Qual UL FFSET Offset
BSC6900
IBCA (Interference Based Channel GBFD-117002 Allocation)
IBCAIUOPAT IBCA IUO Path HLOSSOFF Loss Offset
BSC6900
In an IUO cell (or a CoBCCH cell), the path loss of an MS to the serving cell or a neighborin g cell measured on the underlay is used together with this parameter to estimate the path loss on the overlay. IUO path loss compensat ion = Combiner insert loss difference + Path loss difference SET due to the GCELLCHMGA use of D(Optional) different GBFD-117002
IBCAMAIOU IBCA MAIO Using SMTD Method BSC6900
Determine s the MAIO selection method for each timeslot. The Optimal MAIO policy selects the optimal MAIO being evaluated, while the Random MAIO policy randomly selects a SET MAIO out GCELLCHMGA of qualified D(Optional) MAIOs. GBFD-117002 The IBCA interferenc e evaluation process only considers the interferenc e of the strongest N existing calls on the newlyestablishe d call being evaluated. This parameter correspond s to the SET aboveGCELLCHMGA mentioned D(Optional) N. GBFD-117002
IBCA Max. IBCAMAXINT Interference FSRCNUM Source Num.
BSC6900
IBCANCELL IBCA Neighbor FLAG Cell Flag
BSC6900
Indicates whether this neighborin g cell is the IBCA neighborin g cell of the serving cell. That is, when a cell is configured as the neighborin g cell of the serving cell, whether the IBCA algorithm considers the interferenc e between the serving cell and ADD the G2GNCELL(Opti neighborin onal) g cell. GBFD-117002
IBCANCELL IBCA Pathloss PATHLOSSE Est of Non. MR STIMATE Ncell
BSC6900
Estimates the receive level of the unmeasure d IBCA neighborin g cells. When a consecutiv e "IBCA Non Measurem ent Ncell Stat. Num" measurem ent reports cover less than six neighborin g cells (or the number of the reported neighborin g cells is smaller than that of the actually configured neighborin g cells), SET this GCELLCHMGA parameter D(Optional) is used to GBFD-117002
IBCANEWCA LLCIROFFS Target CIR Offset ET of IBCA New Call BSC6900
When the IBCA algorithm is enabled, this parameter is used to calculate the target CIR of a new call. The formula is as follows: Target CIR of a new call = Target CIR in use + Target CIR SET Offset of GCELLCHMGA IBCA New D(Optional) Call GBFD-117002
IBCANHOAS SWAITMEAS URERPTTIM IBCA Natural HO E Waiting Mr Time BSC6900
Length of the timer for a call to measure the path loss in the neighborin g cell with strong interferenc e of the target cell. The call to be handed over needs to measure the path loss before initiating the handover to the target cell when dynamic measurem ent of the BA2 list is enabled during the normal SET handover. GCELLCHMGA When this D(Optional) parameter GBFD-117002
IBCANONME IBCA Non ANCELLSTA Measurement TNUM Ncell Stat. Num
BSC6900
Estimates the receive level of the unmeasure d IBCA neighborin g cells. When a consecutiv e "IBCA Non Measurem ent Ncell Stat. Num" measurem ent reports cover less than six neighborin g cells (or the number of the reported neighborin g cells is smaller than that of the actually configured neighborin g cells), SET this GCELLCHMGA parameter D(Optional) is used to GBFD-117002
IBCAOPRRE VISEFACTO Corrected Factor R of IBCA Priority BSC6900
When the IBCA algorithm is enabled and the HSN is not 0, the IBCA priority and the SDCCH/P DCH priority are divided by this corrected factor respectivel y to reduce the weight of IBCA priority. In addition, the priority of the interferenc SET e band is GCELLCHMGA considered D(Optional) . GBFD-117002 Specifies a period during which the inter-BSC information exchange must be completed. The information is mainly used by IBCA for C/I ratio estimation. GBFD-117002
IBCAOUTBS IBCA Info Report CINFORPTP Period Between RD BSC BSC6900
IBCAPATHL IBCA Pathloss OSSOFF Offset
BSC6900
When the path loss of an MS to a neighborin g cell cannot be measured based on the existing measurem ent results, it is estimated based on the path loss of the MS to the serving cell SET plus the GCELLCHMGA IBCA path D(Optional) loss offset. GBFD-117002
IBCAPLFILT IBCA Path Lose FACTOR Filter Factor
BSC6900
Considers the influence of history path loss information during the calculation of the ICDM algorithm path loss. The smaller the filtering coefficient, the smaller the influence of history path loss; on the other hand, the larger the filtering coefficient, the larger the SET influence GCELLCHMGA of history D(Optional) path loss. GBFD-117002
IBCARXLEV IBCA RxLev OFFSET Offset
BSC6900
Estimates the receive level of the unmeasure d IBCA neighborin g cells. When a consecutiv e "IBCA Non Measurem ent Ncell Stat. Num" measurem ent reports cover less than six neighborin g cells (or the number of the reported neighborin g cells is smaller than that of the actually configured neighborin g cells), ADD this G2GNCELL(Opti parameter onal) is used to GBFD-117002
IBCASCELL PATHLOSS
IBCA Service Cell Pathloss BSC6900
Use this parameter when the path loss of an MS to serving cells cannot be measured based on SET the existing GCELLCHMGA measurem D(Optional) ent results GBFD-117002
IBCASOFTB IBCA Soft Block LKSAICOFF SAIC Offset
BSC6900
MSs that support SAIC can tolerate a lower carrier-tointerferenc e ratio. This variable indicates the downward adjustment step of the soft blocking SET threshold GCELLCHMGA of SAIC D(Optional) MSs. GBFD-117002 Whether to deny the access of a call when none of the MAIO evaluation results meets the C/I ratio requiremen t of the call during SET channel GCELLCHMGA assignmen D(Optional) t GBFD-117002
IBCASOFTB IBCA Soft Block LKSWITCH Switch
BSC6900
IBCA SubIBCASUBCH Channel NHANDOVE Handover RALLOWED Allowed
BSC6900
Whether the handover of the calls on the single channels is allowed (single channels are the two half-rate subchannels on a timeslot, in which only one is in the occupied state) when single channels are to be adjusted to a full-rate channel. When this parameter is set to SET ON, the GCELLCHMGA handover D(Optional) of the calls GBFD-117002 Whether a MAIO meets the access requiremen t. When the C/I ratio of a MAIO is higher than this threshold, the MAIO can be assigned SET to the call GCELLCHMGA being D(Optional) processed. GBFD-117002
IBCA MAIO IBCATARGE Target C/I TCIRTHRSH Threshold
BSC6900
IBCAUSEDIU IUO IBCA OSUBLAY Allowed
BSC6900
IBCAUSRDY IBCA User Dyn NCMEASUR Measure ENCELL Neighbor Cell
BSC6900
Whether to enable the IBCA algorithm for the overlay IBCA SET and (Interference GCELLCHMGA underlay of Based Channel D(Optional) an IUO cell GBFD-117002 Allocation) Whether a single IBCA MS can dynamicall y measure the neighborin g cells. When this parameter is set to YES, the neighborin g cells where "IBCA Dynamic Measure Neighbor Cell Flag" is set to YES are dynamicall y measured. Dynamic measurem ent on neighborin g cells is IBCA SET mutually (Interference GCELLCHMGA exclusive Based Channel D(Optional) to directed GBFD-117002 Allocation)
IBCAWAFRS IBCA WAMR FR OFTBLKTHR Soft Block D Threshold BSC6900
The lowest C/I ratio that can be tolerated by IBCA WAMR FR. The C/I ratio of an idle channel must be larger than this parameter. Otherwise, it cannot be assigned. In addition, the system does not allow a newlyestablishe d call causing the C/I ratio of existing calls to be SET lower than GCELLCHMGA this D(Optional) parameter. GBFD-117002
ICBALLOW
ICB Allowed
BSC6900
This parameter is used to enable the Intelligent Combiner Bypass (ICB) function on the BCCH TRX of a cell. This parameter specifies whether to allow the cell to enable the ICB function. When this parameter is set to YES, the TCHs on the nonBCCH TRX are preferential ly SET assigned. Intelligent GCELLBASICP In this way, Combiner ARA(Optional) the largest GBFD-111604 Bypass
ICF
Intelligent Control Flag BSC6900
Whether to enable the intelligent control of the diesel engine. If this parameter is set to ENABLE, the PMU will control the diesel engine automatica lly according to the settings of the parameters to save the energy. This parameter SET is set to BTSAPMUBP(O ENABLE ptional) by default. GBFD-111202 O&M of BTS
ICMPPKGLE ICMP packet N Length
BSC6900
ICMP packet length. It is the total length of the ICMP packet ADD containing IPPATH(Optiona the IP l) header. GBFD-118605 IP QOS DSCP correspond ing to the interaction service with the THP level SET of BSCPSTCDSC PRIORITY PMAP(Optional) 1 GBFD-118603 Gb over IP
ICTHP1DSC DSCP of PRI.1 P INTACT[QoS]
BSC6900
BSC6900
DSCP correspond ing to the interaction service with the THP level SET of BSCPSTCDSC PRIORITY PMAP(Optional) 2 GBFD-118603 Gb over IP DSCP correspond ing to the interaction service with the THP level SET of BSCPSTCDSC PRIORITY PMAP(Optional) 3 GBFD-118603 Gb over IP ADD SCHTSK(Manda tory) SET SCHTSKSW(Op tional) ADD SUBTSK(Option al) ADD SUBCMD(Optio nal) STR SCHTSK(Option al) ADD BTSBRDCAP(M andatory)
BSC6900
ID
Task ID
BSC6900
Number of the scheduled task GBFD-111203 O&M of BSC Number of the scheduled task GBFD-111203 O&M of BSC
ID
Task ID
BSC6900
ID
Index
BSC6900
Index
Idle_Code
Idle Code
BSC6900
This parameter indicates the idle code of the A interface. It is used for the interconne SET ction of the TCPARA(Option A al) interfaces. GBFD-118602 A over IP
IDLECODE
Idle code
BSC6900
SET E1T1LOP(Optio nal) IDLE code None
None
IDLESDTHR Idle SDCCH ES Threshold N1
BSC6900
When the number of idle SDCCH channels in a cell is smaller than this parameter, the system searches for available TCHs and transforms SET them into SDCCH GCELLCHMGB SDCCH Dynamic ASIC(Optional) channels. GBFD-113001 Adjustment SET BTSEXCURSIO N(Mandatory) ADD EXTNCELL(Man datory) SET BSCSYNCOFF( Mandatory) SET BTSAISS(Mand atory) Index type GBFD-111202 O&M of BTS ADD BTSESN(Manda tory) SET BSCABISPRIM BTS index AP(Mandatory) type None
IDTYPE
Index Type
BSC6900
IDTYPE
BTS Index Type
BSC6900
None
IDTYPE
Index Type
BSC6900
ADD GCELLFREQ(M andatory) ADD GCELLMAGRP( Mandatory) ADD GCELLOSPMA P(Mandatory) SET GCELLAMRQU L(Mandatory) SET GCELLBASICP ARA(Mandatory) SET GCELLCCAD(M andatory) SET GCELLCCTMR( Mandatory) SET GCELLCCUTRA NSYS(Mandator y) SET GCELLEXTMSR PARA(Mandator y) SET GCELLGSMR(M andatory) SET Type of an Configuration GCELLIDLEBA index MRFD-210301 Management ADD G2GNCELL(Ma Configuration ndatory) Index type MRFD-210301 Management SET GCELLHOINTE RRATLDB(Man Type of an MBSC Load datory) index MRFD-211402 Balancing
IDTYPE
Index Type
BSC6900
IDTYPE
Index Type
BSC6900
IDTYPE
Index Type
BSC6900
ADD PTPBVC(Manda tory) SET GCELLEGPRSP ARA(Mandatory) SET GCELLPRACH( Mandatory) SET GCELLPRIVAT EOPTPARA(Ma ndatory) SET GCELLPSBASE (Mandatory) SET GCELLPSCHM( Mandatory) SET GCELLPSCS(M andatory) SET GCELLPSI1(Ma ndatory) SET GCELLPSOTHE RPARA(Mandat ory) SET GCELLPSPWP ARA(Mandatory) SET PSCELLTODSP
Subscriber s can specify the cell according to the index or Configuration the name. MRFD-210301 Management
IDTYPE
Index Type
BSC6900
SET BTSFMUABP(M andatory) SET BTSNFCBBP(M andatory) SET BTSPMUBP(Ma ndatory) SET BTSAPMUBP(M andatory) SET BTSDATUBP(M andatory) SET BTSDEMUBP(M andatory) SET BTSDFCUBP(M andatory) SET BTSDHEUBP(M andatory) SET BTSDOMUBP( Mandatory) SET BTSDPMUBP(M andatory) SET BTSDTMUBP(M andatory) SET
Index type of the BTS. BYNAME: query by BTS name; BYID: query by BTS index. GBFD-111202 O&M of BTS
IDTYPE
Index Type
BSC6900
SET BTSSHARING( Mandatory) ADD BTSSFPMODE( Mandatory) SET BTSFORBIDTS( Mandatory) SET BTSIDLETS(Ma ndatory) SET BTSOMLTS(Ma ndatory) TID BTSABISTS(Ma ndatory) ADD BTSIPRT(Mand atory) SET BTSETHPORT( Mandatory) SET BTSRINGATTR( Mandatory) SET BTSTRCMPR(M andatory) SET BTSCTRL(Mand atory) SET
Index type. BYNAME: query by name; BYID: query by index. GBFD-111202 O&M of BTS
IDX
Semipermanent Link Index
BSC6900
Index of ADD the SemiSEMILINK(Mand semiperma Permanent atory) nent link GBFD-114701 Connection SET MSTOCELL(Ma ndatory) TST SNDRSI(Mandat ory) TST UPDMSRAC(Ma ndatory)
IDXTYPE
Index Type
BSC6900
Support the index based on the TLLI and IMSI mode
IDXTYPE
Index Type
BSC6900
Index type, supporting the index based on SET the cell PSCELLTODSP and BSC (Mandatory) mode. GBFD-111203 O&M of BSC
IFCBSHAKE HAND If CB Shake Hand BSC6900
Whether the handshake mechanis m is enabled at the Cb interface. Currently, the BSC6900 and the CBC communic ations through the TCP/IP protocol. Thus, the BSC6900 may not detect communic ation link disconnecti on in some cases. The handshake mechanis m is used for ADD checking GCBSADDR(Op whether a tional) communic GBFD-113601 ADD BTSIPRT(Mand atory) IMP BTSIPRT(Mand atory)
IFNO
Outgoing Interface No.
BSC6900
Number of the outgoing interface of a link GBFD-111202 O&M of BTS
IFOFFSETHI Positive or Minus G Offset BSC6900
Whether to set the middle frequency offset to positive SET offset or BTSRXUBP(Opt minus ional) offset GBFD-111202 O&M of BTS
IFOFFSETL OW
Indication Offset
BSC6900
Indication offset in the middle frequency SET offset BTSRXUBP(Opt configurati ional) on GBFD-111202 O&M of BTS Whether to report the progress. "NO" indicates that the progress is not STR reported. BTSLOG(Option "YES" al) indicates ULD that the BTSLOG(Option progress is al) reported. GBFD-111202 O&M of BTS
IFREPPRO
Report Process Flag
BSC6900
IGNOREMR NUM
Ignore Measurement Report Number
BSC6900
Number of invalid measurem ent reports allowed when the BSC6900 filters the measurem ent reports. When the number of received measurem ent reports is no larger than this parameter, the BSC does not perform filtering or make SET quick GCELLHOFAST handover Fast Move (Optional) judgment. GBFD-510102 Handover
IMEI
IMEI
BSC6900
CHK INNSPCH(Mand atory) STR CALLRESLOP( Mandatory) ADD GCSCHRUSER( Value of Mandatory) an IMEI
IMMASSAIN IMM ASS A IF TERFTIMER Creation Timer
BSC6900
Timer for the BSC6900 waiting for a CC message after sending a CR message. If the timer expires, SET the seized A Interface GCELLTMR(Opt SDCCH is Protocol ional) released. GBFD-111804 Process The channel activation and immediate assignmen t messages are sent at the same time to accelerate the signaling processing , thus increasing the response SET speed of Assignment GCELLBASICP the and Immediate ARA(Optional) network. GBFD-110502 Assignment
Immediate Assignment IMMASSCBB Optimized
BSC6900
Move Immediate IMMASSDLS Assignment Down HIFT to BTS BSC6900
This parameter specifies whether to support the takeover of the packet immediate assignmen t by the BTS. It is relative to the uplink immediate assignmen t. To improve the access rate of the MS, the BSS allocates the uplink TBF resources to the BTS in advance. The BTS sends the SET immediate GCELLPSOTHE assignmen RPARA(Optiona t message l) to the MS GBFD-119202
Packet Assignment Taken Over by the BTS
IMMASSEN
TCH Immediate Assignment
BSC6900
Whether to allow immediate TCH assignmen t. If this parameter is set to YES, the BSC can assign a TCH immediatel y when there is no available SDCCH for a channel request. If this parameter is set to NO, the BSC can assign only an SDCCH when processing SET a channel Assignment GCELLBASICP access and Immediate ARA(Optional) request. GBFD-110502 Assignment
IMMASSMAX Max Delay of IMM DELAYTIME ASS Retransmit BSC6900
Maximum time delay in resending an immediate assignmen t message. Within the period specified by this parameter, an immediate assignmen t message can be dispatched and retransmitt ed. Otherwise, the message is not dispatched SET or Assignment GCELLCCTMR( retransmitt and Immediate Optional) ed. GBFD-110502 Assignment
Max Transmit IMMASSMAX Times of IMM SENDNUM ASS
BSC6900
Maximum number of retransmis sions of an immediate assignmen t message. When the value of this parameter is reached, the immediate assignmen t message is not retransmitt ed even if the value of "Max Delay of Imm_Ass SET Retransmit Assignment GCELLCCTMR( " is not and Immediate Optional) exceeded. GBFD-110502 Assignment Whether the BSC6900 sends immediate assignmen t retransmis SET sion Assignment GCELLCCTMR( parameters and Immediate Optional) to the BTS GBFD-110502 Assignment Whether to assign channels according to the access_del ay value in channel request messages during immediate SET channel GCELLHOIUO( assignmen Optional) t GBFD-113201 Concentric Cell
Use IMM ASS IMMASSRES Retransmit ENDEN Parameter
BSC6900
IMMASSTAA TA Pref. of ImmeLLOW Assign Allowed BSC6900
IMMASSTAT TA Threshold of HRES Imme-Assign Pref BSC6900
When the access_del ay value in the channel request message is smaller than this parameter, the overlay channels are assigned preferential ly; otherwise, the underlay channels are SET assigned GCELLHOIUO( preferential Optional) ly. GBFD-113201 Concentric Cell Whether to adjust the offset time immediatel ADD y after the SoftAISSCFG(Optio BTS is Synchronized nal) reset GBFD-118201 Network
IMMFNAD
Immediate Initial Adjust After Site Reset Enable
BSC6900
IMMREJWAI TINDTIMER T3122
BSC6900
Timer carried by the Wait Indication information element when the BSC6900 sends an immediate assignmen t reject message to an MS. After the MS receives the immediate assignmen t reject message, the MS reattempts to access the network SET after the Assignment GCELLTMR(Opt timer and Immediate ional) expires. GBFD-110502 Assignment CHK INNSPCH(Mand atory) STR CALLRESLOP( Mandatory) ADD GCSCHRUSER( Value of Mandatory) an IMSI SET MSTOCELL(Ma ndatory) TST SNDRSI(Mandat ory) TST UPDMSRAC(Ma ndatory) ADD GPSCHRUSER( Mandatory)
IMSI
IMSI
BSC6900
IMSI
IMSI
BSC6900
Internation al mobile subscriber identity of the MS. IMSI containing the number 0 to 9. GBFD-114101 GPRS
INBSCHOTI MER
T3121
BSC6900
Timer for the BSC6900 waiting for a handover complete message after sending a handover request acknowled gment message in 2G/3G handover or interBSC handover. If the timer expires, a HUAWEI I SET Clear REQ Handover GCELLTMR(Opt message GBFD-110601 HUAWEI II ional) is reported. GBFD-510501 Handover Threshold for fine tuning the BTS clock. If the offset of the BTS clock is smaller than the threshold, ADD no fine SoftAISSCFG(Optio tuning is Synchronized nal) performed. GBFD-118201 Network ADD Fine tuning SoftAISSCFG(Optio period in Synchronized nal) the BSC GBFD-118201 Network
INCHLOD
Fine Tuning Threshold Fine Tuning Period in BSC
BSC6900
INCHPRD
BSC6900
INCLUDEAN G Included Angle
BSC6900
Included angle formed by the major lobe azimuths of the antennas in two cells under one BTS. A major lobe azimuth is measured from the due north to the direction of the cell antenna in SET a BSS-Based GCELLLCS(Opti clockwise LCS (Cell ID + onal) rotation. GBFD-115402 TA)
INCN
In Port Cabinet No.
BSC6900
Number of ADD the in-port BTSCONNECT( cabinet on Optional) a BTS GBFD-111202 O&M of BTS
INDEN3
Independent E1 Port 3
BSC6900
Whether to separate E1 from other optical fibers for the use of other devices. If this parameter is set to YES, other BTSs can connect to the BSC6900 through the independe nt E1 port 3 of the SET BTS3006C BTSDOMUBP(O /BTS3002 ptional) E. GBFD-111202 O&M of BTS The triggering of intra-cell F-H handovers must meet the P/N criteria, that is, when the condition for intracell F-H handovers is met for P seconds during N seconds, an intracell F-H handover is triggered. This parameter correspond SET s to the P AMR FR/HR GCELLHOBASI in the P/N Dynamic C(Optional) criteria. GBFD-115504 Adjustment
INFHHOLAS Intracell F-H HO T Last Time
BSC6900
INFHHOSTA Intracell F-H HO T Stat Time
BSC6900
The triggering of intra-cell F-H handovers must meet the P/N criteria, that is, when the condition for intracell F-H handovers is met for P seconds during N seconds, an intracell F-H handover is triggered. This parameter correspond SET s to the N AMR FR/HR GCELLHOBASI in the P/N Dynamic C(Optional) criteria. GBFD-115504 Adjustment Information exchange ADD content to GNRNC(Mandat be MBSC Load ory) supported MRFD-211402 Balancing Infrared ADD alarm Faulty EMU(Optional) switch MRFD-210304 Management
INFOEXCHG Info Exchange LIST Content INFRA_RED Infrared alarm _MASK switch
BSC6900
BSC6900
F2H HO INHOF2HTH Threshold
BSC6900
For an AMR call, if the currently occupied channel is a full rate channel and the Radio Quality Indication (RQI) is always higher than the threshold set by this parameter, an intracell F-H SET handover AMR FR/HR GCELLHOBASI is Dynamic C(Optional) triggered. GBFD-115504 Adjustment For an AMR call, if the currently occupied channel is a half rate channel and the Radio Quality Indication (RQI) is always lower than the threshold set by this parameter, an intracell H-F SET handover AMR FR/HR GCELLHOBASI is Dynamic C(Optional) triggered. GBFD-115504 Adjustment
H2F HO INHOH2FTH Threshold
BSC6900
INHOPWRO Power Overload VERLOADTH Threshold In Ho. RESHOLD In
BSC6900
Power overload threshold for triggering incoming handover to the TRX under the prerequisit e that the power amplifier of the TRX provides the SET maximum GTRXDEV(Opti output onal) power. GBFD-111005
INITCDMDF
AMR Starting Mode[F]
BSC6900
Initial coding mode used for full rate AMR calls. The four values 0, 1, 2, and 3 of this parameter respectivel y represent the lowest, low, high, and highest SET coding GCELLCCAMR( rates in the Optional) ACS. GBFD-115501 AMR FR
AMR Starting INITCDMDH Mode[H]
BSC6900
Initial coding mode used for half rate AMR calls. The four values 0, 1, 2, and 3 of this parameter respectivel y represent the lowest, low, high, and highest SET coding GCELLCCAMR( rates in the Optional) ACS. GBFD-115502 AMR HR Initial coding mode used for broadband AMR calls. The three values 0, 1 and 2 of this parameter respectivel y represent the lowest, low and highest SET coding GCELLCCAMR( rates in the Optional) ACS. GBFD-115507 WB AMR
INITCDMDW AMR Starting B Mode[WB]
BSC6900
INMASK
In BSC Mask
BSC6900
Specifies the ADD timeslot SEMILINK(Optio mask in nal) BSC6900
SemiPermanent GBFD-114701 Connection
OL Subcell INNASSOPT Assignment EN Optimization
BSC6900
Whether to assign channel requests in the overlay subcell to the underlay subcell according to "UL Subcell Lower Load Threshold" . If the load of the underlay subcell is lower than "UL Subcell Lower Load Threshold" , incoming calls in the overlay subcell will be preferential SET ly assigned GCELLHOEDB to the Enhanced DualPARA(Optional) underlay GBFD-114402 Band Network Whether to allow underlay-toSET overlay GCELLHOEDB edge PARA(Optional) handovers GBFD-114402 ADD Index of EXTNCELL(Man the cell in datory) the BSC MRFD-210301 ADD Name of EXTNCELL(Man the cell in datory) the BSC MRFD-210301
INNCELLED Inner Cell EDGE GEHOEN HO Enable BSC Inner Cell Index
BSC6900
Enhanced DualBand Network Configuration Management Configuration Management
INNCELLID
BSC6900
INNCELLNA BSC Inner Cell ME Name
BSC6900
Load HO of OL INNLOADHO Subcell to UL EN Subcell
BSC6900
Whether to allow underlay-toSET overlay GCELLHOEDB load Enhanced DualPARA(Optional) handovers GBFD-114402 Band Network
OL Subcell Load INNLOADHO Diversity HO PERI Period
BSC6900
Overlay-tounderlay load handovers are performed by levels. This parameter indicates SET the GCELLHOEDB duration of Enhanced DualPARA(Optional) each level. GBFD-114402 Band Network Level step during overlay-tounderlay SET hierarchica GCELLHOEDB l load Enhanced DualPARA(Optional) handovers GBFD-114402 Band Network In an enhanced dual-band network, if the load of the overlay subcell is higher than this parameter, the system cannot initiate an SET underlay-toGCELLHOEDB overlay Enhanced DualPARA(Optional) handover. GBFD-114402 Band Network Incoming ADD BSC6900 SEMILINK(Mand port atory) number SemiPermanent GBFD-114701 Connection
Step Length of INNLOADHO OL Subcell Load STEP HO
BSC6900
INNSERIOV Inner Cell Serious ERLDTHRED OverLoad Thred BSC6900
INPN
In BSC Port No.
BSC6900
INPN
BTS In Port No.
BSC6900
ADD BTSCONNECT( Number of Mandatory) a BTS port GBFD-111202 O&M of BTS ADD DXXTSEXGREL In-port ATION(Mandato number of ry) a DXX GBFD-111203 O&M of BSC
INPORTNO
DXX In Port No.
BSC6900
INPUTMD
Latitude and Longitude Input Mode
BSC6900
Mode of inputting the latitude and SET longitude BSS-Based GCELLLCS(Opti of a cell LCS (Cell ID + onal) location GBFD-115402 TA) Whether to allow interSET BSC GCELLHOCTRL SDCCH SDCCH (Optional) handovers GBFD-110608 Handover Incoming ADD BSC6900 SEMILINK(Mand slot atory) number SemiPermanent GBFD-114701 Connection
Inter-BSC INRBSCSDH SDCCH HO OEN ALLowed
BSC6900
INSN
In BSC Slot No.
BSC6900
INSN
In Port Slot No.
BSC6900
Number of ADD the in-port BTSCONNECT( slot on a Optional) BTS GBFD-111202 O&M of BTS Incoming ADD BSC6900 SEMILINK(Mand subrack atory) number SemiPermanent GBFD-114701 Connection
INSRN
In BSC Subrack No.
BSC6900
INSRN
In Port Subrack No.
BSC6900
Number of ADD the in-port BTSCONNECT( subrack on Optional) a BTS GBFD-111202 O&M of BTS Time interval for sending a ADD simple cell GSMSCB(Mand broadcast Simplified Cell atory) message GBFD-113602 Broadcast
INT
Broadcast Interval
BSC6900
Adjacent Cell INTELEVHO Inter-layer HO HYST Hysteresis
BSC6900
Hysteresis value during the handovers between cells on different layers or of different priorities. This value is used to suppress HUAWEI I ADD inter-layer Handover G2GNCELL(Opti ping-pong GBFD-110601 HUAWEI II onal) handovers. GBFD-510501 Handover Type of an interferenc e band statistics algorithm used when the frequency scanning function is enabled. The interferenc e band statistics algorithm I uses pair average, and the interferenc e band statistics SET algorithm II GCELLSOFT(O uses linear Cell Frequency ptional) average. GBFD-112401 Scan
Interfere Band INTERBAND Stat Algorithm STATALGO Type
BSC6900
INTERCELL HYST
Inter-cell HO Hysteresis
BSC6900
Reduces ping-pong handovers between cells on a same layer. This parameter is invalid when cells HUAWEI I ADD are on Handover G2GNCELL(Opti different GBFD-110601 HUAWEI II onal) layers. GBFD-510501 Handover Specifies an interval between two consecutiv e HUAWEI I SET interferenc Handover GCELLHOFITP e GBFD-110601 HUAWEI II EN(Optional) handovers GBFD-510501 Handover
INTERFERE Penalty Time on HOPENTIME Interfere HO
BSC6900
INTERFERE Interfere HO Valid LASTTIME Time BSC6900
The triggering of interferenc e handovers must meet the P/N criteria, that is, when P out of N measurem ent reports meet the condition for interferenc e handovers, a concentric circle handover is triggered. This parameter correspond SET s to the P GCELLHOBASI in the P/N HUAWEI II C(Optional) criteria. GBFD-510501 Handover
INTERFERE Interfere HO STATTIME Static Time
BSC6900
The triggering of interferenc e handovers must meet the P/N criteria, that is, when P out of N measurem ent reports meet the condition for interferenc e handovers, a concentric circle handover is triggered. This parameter correspond SET s to the N GCELLHOBASI in the P/N HUAWEI II C(Optional) criteria. GBFD-510501 Handover
INTERFHOE Interference HO N Allowed
BSC6900
Whether to allow the interferenc e handover algorithm. Interferenc e handovers are triggered when the receive level is higher than the receive threshold while the transmit quality is lower than the interferenc e handover quality threshold, that is, when the MSs are subject to all kinds of HUAWEI I SET radio Handover GCELLHOBASI interferenc GBFD-110601 HUAWEI II C(Optional) es. GBFD-510501 Handover Whether to consider interferenc e priorities during SET channel GCELLCHMGA assignmen D(Optional) t GBFD-111005
INTERFPRIA Interf. Priority LLOW Allowed
BSC6900
INTERFTHR Interference Band ES0 Threshold 0 BSC6900
Threshold used for interferenc e measurem ent. The BSS measures the uplink quality of the radio channels occupied by MSs, and calculates and reports the interferenc e on each of the idle channels. This helps the BSC6900 to assign channels. According to the TRX strength of Management interferenc Enhanced SET e signals, Channel GCELLOTHEXT the GBFD-111001 Assignment (Optional) interferenc GBFD-111005 Algorithm
BSC Interior Clock INTERIORSY Synchronize NCTMR Protect Time
BSC6900
Value of the timer for synchroniz ation between BSCs. If a BSC fails to synchroniz e with the control BSC before the timer expires, the BSC starts to synchroniz ADD e the BTSs SoftAISSCFG(Optio under its Synchronized nal) control. GBFD-118201 Network
Interference INTERPERIO Calculation D Period
BSC6900
Period during which interferenc e levels are averaged. The interferenc e levels on idle channels are averaged before the BTS sends a radio resource indication message to the BSC6900. The averaging result is used for classifying the interferenc e levels on idle SET channels GCELLOTHEXT into five (Optional) interferenc GBFD-111005
INTERRATC Inter-RAT Cell ELLRESELE Reselection N Enable
BSC6900
InterRatCsSe Inter-RAT CS rviceLoadHo Service HO Load Thrd Threshold BSC6900
This parameter specifies whether the reselection from 2G GSM and SET cells to 3G UMTS Traffic GCELLHOBASI cells is Steering Based C(Optional) allowed. GBFD-511104 on Iur-g Threshold for setting the flag of accepting inter-RAT SET CS service GSM and GCELLHOINTE handover UMTS Load RRATLDB(Optio of a 2G Balancing nal) cell GBFD-511103 Based on Iur-g
INTERRATIN Inter-RAT In BSC BSCHOEN Handover Enable BSC6900
This parameter specifies whether the handover GSM/WCDMA from 3G Interoperability SET cells to 2G GSM/TDGCELLHOBASI cells is GBFD-114301 SCDMA C(Optional) allowed. GBFD-114302 Interoperability Whether to reserve resources for the incoming BSC SET handover GCELLHOBASI on the IurC(Optional) g interface MRFD-211404 Width of load band [EcNo] during the inter-RAT SET hierarchica GCELLHOINTE l loadRRATLDB(Optio based nal) handover GBFD-511103 Initial EcNo value of the interSET RAT loadGCELLHOINTE based RRATLDB(Optio handover nal) band GBFD-511103 Step of changing the EcNo value during the inter-RAT SET hierarchica GCELLHOINTE l loadRRATLDB(Optio based nal) handover GBFD-511103
Allow Incoming InterRatIurgIn BSC Handover at BscHoEn Iur-g BSC6900
MBSC Handover based on Load Enhancement
InterRATLoa Inter-RAT Load dHoEcNoBan HO Bandwidth dWidth [EcNo]
BSC6900
InterRATLoa Inter-RAT Load dHoEcNoStar HO EcNo at Start t Point BSC6900
InterRATLoa Inter-RAT dHoEcNoSte Hierarchy Load p HO Step [EcNo]
BSC6900
InterRATLoa Inter-RAT Load dHoRSCPBa HO Bandwidth ndWidth [RSCP]
BSC6900
Width of load band [RSCP] during the inter-RAT SET hierarchica GCELLHOINTE l loadRRATLDB(Optio based nal) handover GBFD-511103 Initial RSCP value of the interSET RAT loadGCELLHOINTE based RRATLDB(Optio handover nal) band GBFD-511103 Step of changing the RSCP value during the inter-RAT SET hierarchica GCELLHOINTE l loadRRATLDB(Optio based nal) handover GBFD-511103
InterRATLoa Inter-RAT Load dHoRSCPSta HO RSCP at rt Start Point
BSC6900
InterRATLoa Inter-RAT dHoRSCPSte Hierarchy Load p HO Step [RSCP] BSC6900
INTERRATO Inter-RAT Out UTBSCHOE BSC Handover N Enable
BSC6900
This parameter specifies whether the handover GSM/WCDMA from 2G Interoperability SET cells to 3G GSM/TDGCELLHOBASI cells is GBFD-114301 SCDMA C(Optional) allowed. GBFD-114302 Interoperability
InterRatServi Allow Inter-RAT ceLoadHoSwi Load HO in tch Access State
BSC6900
When this parameter is set to Servicebased, the inter-RAT handover is triggered on the basis of the service distribution . In this case, the target cell is selected according to the traffic load. When this parameter is set to Loadbased, the inter-RAT handover is triggered on the basis of the load SET balance. In GCELLHOINTE this case, RRATLDB(Optio the target nal) cell is GBFD-511103
INTERVAL
Relative Time
BSC6900
EXP LOG(Optional)
Time span before the command is executed. The logs generated within the time span O&M of BSC are to be GBFD-111203 Security exported. MRFD-210305 Management
INTERVAL
Send PKT Interval[s]
BSC6900
Interval for sending packets to STR test ETHOAMLOOP Ethernet TST(Optional) OAM loop None
None
INTFREQUE Interference NCY Frequency
BSC6900
Frequency index of the interferenc e Processing of measurem Measurement ent in type Report 3 of an Pre-processing SET extension of GCELLEXTMSR measurem GBFD-110801 Measurement PARA(Optional) ent report GBFD-110802 Report Lower threshold of the overlay level during underlay-tooverlay handovers. When the receive level of an MS is higher than this threshold, the MS can be SET switched to GCELLHOEDB the overlay Enhanced DualPARA(Optional) subcell. GBFD-114402 Band Network
Incoming OL INTOINNRE Subcell HO Level XLEVTHRED TH BSC6900
INTRABSCC ODECHOCM DTIMER T25
BSC6900
The timer is used to set the time when the BSC6900 waits for an Internal Handover Command message after a Internal Handover Required message is reported in an internal BSC handover when A interface is IP. If the timer expires, the internal SET BSC GCELLTMR(Opt handover HUAWEI I ional) fails. GBFD-110601 Handover
INTRABSCH OTIMER T3103A
BSC6900
Timer started after the BSC6900 delivers a handover command in an intraBSC intercell handover. If the BSC6900 receives a handover complete message before this timer expires, the timer stops. If this timer expires, the BSC6900 considers HUAWEI I SET the Handover GCELLTMR(Opt handover GBFD-110601 HUAWEI II ional) as failed. GBFD-510501 Handover Whether to allow AMR handovers. This parameter has no impact on dynamic SET non-AMR AMR FR/HR GCELLHOBASI F-H Dynamic C(Optional) handovers. GBFD-115504 Adjustment
INTRACELLF Intracell F-H HO HHOEN Allowed
BSC6900
INTRACELL HOEN
Intracell HO Allowed
BSC6900
This parameter specifies whether the intracell handover is enabled. Note: A forced intracell handover is not SET subject to GCELLHOBASI this GBFD-110601 C(Optional) parameter. GBFD-510501
INTRACELL HOTIMER
T3103C
BSC6900
Timer started after the BSC6900 delivers a handover command in an intraBSC intracell handover. If the BSC6900 receives a handover complete message before this timer expires, the timer stops. If this timer expires, the BSC6900 considers HUAWEI I SET the Handover GCELLTMR(Opt handover GBFD-110601 HUAWEI II ional) as failed. GBFD-510501 Handover Whether it is an RNC under the ADD same GNRNC(Mandat MBIC in MBSC Load ory) GU mode MRFD-211402 Balancing
INTRAMBSC Co-MBSC
BSC6900
Inter-RAT Load IntRATLoadH HO EcNo OEcNoThr Threshold
BSC6900
SET GCELLHOINTE RRATLDB(Optio nal)
Inter-RAT IntRATLoadH Hierarchical Load oPeriod HO Period BSC6900
SET GCELLHOINTE RRATLDB(Optio nal)
Minimum Ec/No value of a 3G cell during the load-based GSM and GSM-toUMTS Load UMTS Balancing handover GBFD-511103 Based on Iur-g When the load of a cell is greater than or equal to Load HO Threshold, all the calls in the serving cell send handover requests simultaneo usly. Thus, the load on the CPU increases rapidly. In some cases, the cell is congested and call drops might occur. Therefore, the BSC adopts the GSM and hierarchica UMTS Load l load Balancing handover GBFD-511103 Based on Iur-g
Inter-RAT Load IntRATLoadH HO RSCP ORSCPThr Threshold
BSC6900
Minimum RSCP value of a 3G cell during the SET load-based GCELLHOINTE GSM-toRRATLDB(Optio UMTS nal) handover GBFD-511103
INTSN
In BSC Start Timeslot No.
BSC6900
Incoming BSC6900 ADD start SEMILINK(Mand timeslot atory) number
INTSNO
DXX In Time Slot No. BSC6900
ADD DXXTSEXGREL Number of ATION(Mandato a DXX Inry) timeslot GBFD-111203 O&M of BSC Interval for executing the scheduled subtask. If the time mode is set to "DAILY_C" , "WEEKLY _C", or "MONTHL Y_C", you ADD should set SUBTSK(Option this al) parameter. GBFD-111203 O&M of BSC Automatic switchover interval. This parameter needs to be set only when "OMU automatic switchover switch" is set to "ON". The minimum automatic switchover interval is 30 days and the maximum automatic SET switchover ASWPARA(Man interval is datory) 1024 days. GBFD-111203 O&M of BSC
INTV
Time Interval
BSC6900
INTV
OMU Automatic Switchover Interval
BSC6900
INVALBSICE Invalid BSIC N Reporting
BSC6900
IP
IP Address
BSC6900
Whether a measurem ent report can contain the information about a cell with an invalid BSIC. The cell with an invalid BSIC is an unconfigur SET ed GCELLCCUTRA neighborin NSYS(Optional) g cell. GBFD-117501 ADD XPUVLAN(Mand atory) IP address MRFD-210301
Enhanced Measurement Report(EMR) Configuration Management
IP
IP Address
BSC6900
EXP LOG(Optional) ADD SNTPSRVINFO( Mandatory) DLD LICENSE(Mand atory) ULD IP address O&M of BSC LICENSE(Mand of the GBFD-111203 License atory) server MRFD-210403 Management ADD IP address NSVLLOCAL(M of the local andatory) NSVL GBFD-118603 Gb over IP IP address ADD of the NSVLREMOTE( remote Mandatory) NSVL GBFD-118603 Gb over IP IP address of a BTS port. It cannot be SET the same BTSETHPORT( as any IP Optional) address IMP configured BTSDEVIP(Opti in the onal) BSC6900. GBFD-118601 Abis over IP
IP
Local IP Address BSC6900
IP
Remote IP Address
BSC6900
IP
Physical IP
BSC6900
IP
FTPServer IP
BSC6900
DLD RETANTCFG(M andatory) ULD BTSDEVFILE(M andatory) DLD BTSPATCH(Ma ndatory) ULD BTSLOG(Manda tory) DLD BTSSW(Mandat ory)
IP address of the FTP server. When the FTPServer .exe file is downloade d through the FTP Tool button on the LMT, the address of the FTP server is the same as that of the LMT client. GBFD-111202 O&M of BTS
IPADDR
Local IP address BSC6900
The local IP address must be the configured IP address (including the IP address and port address of ADD the IPPATH(Mandat interface ory) board). GBFD-118605 IP QOS Abis IP over E1/T1 A IP over E1/T1 IP-Based ADD IP address GBFD-118611 2G/3G CoDEVIP(Mandato of the GBFD-118622 Transmission ry) board MRFD-211502 on MBSC Side Local IP address of ADD the ETHIP(Mandator Ethernet y) port MRFD-211502 IP-Based 2G/3G CoTransmission on MBSC Side
IPADDR
IP address
BSC6900
IPADDR
IPADDR
Packet source IP address BSC6900
Source IP address of the packet for ADD preventing ICMPGUARD(M the ICMP andatory) attack None ADD IP address VLANID(Mandat of the next ory) hop None
None
IPADDR
Next Hop IP address.
BSC6900
None
IPADDR
IPADDR
IP Address
BSC6900
IPADDR1
IP Address1
BSC6900
Local IP address of ADD the ETHTRKIP(Man aggregatio datory) n group None None ADD IP address SGSNROUTEIN of the FO(Mandatory) router GBFD-118603 Gb over IP ADD First IP SGSN(Mandator address of y) the SGSN GBFD-118603 Gb over IP It must be the valid address of the A, B, or C type and cannot be the broadcast SET address or BTSIPCLKPAR network A(Mandatory) address. GBFD-118606 Clock over IP Second IP ADD address of SGSN(Optional) the SGSN GBFD-118603 Gb over IP It must be the valid address of the A, B, or C type and cannot be the broadcast SET address or BTSIPCLKPAR network A(Mandatory) address. GBFD-118606 Clock over IP Third IP ADD address of SGSN(Optional) the SGSN GBFD-118603 Gb over IP Fourth IP ADD address of SGSN(Optional) the SGSN GBFD-118603 Gb over IP
IPADDR1
Master Clock Server IP Address
BSC6900
IPADDR2
IP Address2
BSC6900
IPADDR2
Slave Clock Server IP Address
BSC6900
IPADDR3
IP Address3
BSC6900
IPADDR4
IP Address4
BSC6900
IPEAAT
IP Frame Error Alarm Threshold
BSC6900
SET BTSETHPORT( Optional) ADD BTSPPPLNK(O ptional) ADD BTSMPGRP(Op tional) IMP BTSPPPLNK(O ptional) IMP BTSMPGRP(Op tional) SET BTSETHPORT( Optional) ADD BTSPPPLNK(O ptional) ADD BTSMPGRP(Op tional) IMP BTSPPPLNK(O ptional) IMP BTSMPGRP(Op tional)
When the number of error frames on the IP layer reaches the value of this parameter, the frame error alarm is generated. GBFD-118630 Ethernet OAM
IPEADT
IP Frame Error Alarm Clearance Threshold BSC6900
When the number of error frames on the IP layer decreases to the value of this parameter, the frame error alarm is cleared. GBFD-118630 Ethernet OAM
IPHC
Head compress
BSC6900
Whether to Abis IP over ADD compress E1/T1 PPPLNK(Option the packet GBFD-118611 A IP over al) headers GBFD-118622 E1/T1
IPHC
Head compress
BSC6900
Whether to compress the IP ADD header of MPGRP(Optiona a MP Link l) group MRFD-210103 aggregation
IPINDEX
IP address index BSC6900
IP address index of Abis IP over ADD the E1/T1 ETHIP(Mandator Ethernet GBFD-118611 A IP over y) port GBFD-118622 E1/T1 IP address index of Abis IP over ADD the E1/T1 ETHTRKIP(Man aggregatio GBFD-118611 A IP over datory) n group GBFD-118622 E1/T1 ADD IP packet IPMUX(Optional multiplex ) index None None
IPINDEX
IP address index BSC6900
IPMUXINDE X IP MUX Index
BSC6900
IPPHYTRAN IP Phy Trans STYPE Type
BSC6900
ADD BTS(Optional)
Type of the physical IP transmissi on medium GBFD-118601 Abis over IP
IPPHYTRAN IP Physical Tran. STYPE Type BSC6900
ADD BTSAUTOPLAN (Optional) IMP BTSIPPARA(Ma ndatory)
Type of IP physical transmissi on cable medium, E1 or FE/GE. GBFD-118601 Abis over IP
ISADDEDTM DHEU Heater PCONTROL Control Allowed
BSC6900
Whether to enable the heater. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDHEUBP(O in another ptional) mode. GBFD-111202 O&M of BTS Whether the BSC is ADD a SoftAISSCFG(Mand reference Synchronized atory) BSC GBFD-118201 Network
ISBASICBSC Base BSC
BSC6900
ISCHAINNC ELL
Chain Neighbor Cell
BSC6900
Whether the cell is a chain neighborin g cell. The parameter is used in the quick handover algorithm. Quick handover aims to increase the handover success rate of an MS moving at a high speed and to ensure the call continuity and low call drop rate. Quick handover applies to the scenario ADD where an G2GNCELL(Opti MS moves Chain Cell onal) fast along GBFD-510103 Handover Whether to support clock server redundanc SET y BTSIPCLKPAR configurati A(Mandatory) on GBFD-118606 Clock over IP Whether to support clock server redundanc SET y BTSIPCLKPAR configurati A(Mandatory) on GBFD-118606 Clock over IP
ISCLKREDU Clock Server CY Redundancy
BSC6900
ISCLKREDU Clock Server CYBAK Redundancy
BSC6900
ISCONFIGE DRING
Config Ring
BSC6900
ISCONFIGT HD
Configure Check Thresholds or Not BSC6900
Whether to enable the BTS to support ring networking . IP BTS does not support ADD this BTS(Optional) parameter. GBFD-117801 Ring Topology If this parameter is set to "YES", the check threshold for a specific board is used. In this case, the following paramters are involved: Forward Bandwidth, Receive Bandwidth, Power Class, TRX Number. If this parameter is set to "NO", the check threshold for a ADD certain BTSRXUBRD(O class of ptional) boards is GBFD-111202 O&M of BTS A service support attribute of a cell, that is, whether an external ADD GSM cell GEXT2GCELL( supports Optional) EDGE GBFD-114201 EGPRS
EDGE Support in ISEDGESUP External PORT Neighbour Cell BSC6900
Is First Class ISFIRSTCLA Transport SS Resource Group
BSC6900
Whether to indicate the first class ADD transport RSCGRP(Mand resource atory) group GBFD-118605 IP QOS A service support attribute of a cell, that is, whether an external ADD GSM cell GEXT2GCELL( supports Optional) GPRS GBFD-114101 GPRS Whether to enable the TRX to carry the main ADD BCCH in Configuration GTRX(Optional) the cell MRFD-210301 Management Whether a BSC in the SET TC pool is BSCBASIC(Man the primary datory) BSC GBFD-113726 TC Pool Whether this location group is the main location group. If the value is Yes, this location group is the main location group. If the value is No, this location group is ADD the slave BTSLOCGRP(M location andatory) group. GBFD-510104 Multi-site Cell
GPRS Support in ISGPRSSUP External PORT Neighbour Cell BSC6900
ISMAINBCC Is Main BCCH H TRX
BSC6900
IsMainBSC
Is Main BSC
BSC6900
ISMAINLOC GRP
Is Main Local Group
BSC6900
NC2 Support in ISNC2SUPP External ORT Neighbour Cell
BSC6900
ISNCMODE
Subnetwork Configure Mode
BSC6900
A service support attribute of a cell, that is, whether an external NetworkADD GSM cell Controlled Cell GEXT2GCELL( supports Reselection Optional) NC2 GBFD-116201 (NC2) Configurati on mode of the IP subnetwor k. Static configurati on: fixed local NSVL and remote NSVL parameters through manual configurati on; Dynamic configurati on: the NSVL parameter obtained through negotiation between the BSC and the SGSN after the local NSVL and SGSN service point are ADD configured NSE(Optional) manually. GBFD-118603 Gb over IP
ISQOSPATH IS QOSPATH
BSC6900
ADD Whether it IPMUX(Mandato is ry) QOSPATH None
None
ISSPTBSCAI Support BSC SS AISS
BSC6900
Whether the Um interface software synchroniz ation ADD between SoftAISSCFG(Mand BSCs is Synchronized atory) supported GBFD-118201 Network Whether multiple SET DEMUs BTSENVALM(M are andatory) configured GBFD-111202 SET BTSOTHPARA( ISSUPER Optional) BTS GBFD-117803 Whether to enable the BTS to support local switching If the BTS supports local switching, when the calling and called MSs are both within the BTS or BTS group, the voice signals are looped back to the MSs within the BTS or BTS group instead of being sent over the Abis interface to the BSC SET and MSC. BTSLSW(Option In this way, al) the Abis GBFD-117702
ISSPTDEMU Demu Configure S Information ISSUPERBT S Is Supper BTS
BSC6900
BSC6900
O&M of BTS Abis Transmission Backup
ISSUPPORT BTSLSWITC Support BTS H Local Switch
BSC6900
BTS Local Switch
IsSupportTcP Is Support Tc ool Pool
BSC6900
ISTCBRD
TC board
BSC6900
Whether to support the TC pool function. The TC Pool feature is implement ed by connecting the maim processing subracks (MPSs) and extended processing subracks (EPSs) in multiple BSC6900s to the transcoder subracks (TCSs) of one BSC6900. In this manner, all the involved SET BSC6900s BSCBASIC(Opti share the onal) TC GBFD-113726 TC Pool Whether it is a TC board.If the board is for the TC subrack, set the parameter to YES. If the board is not for the TC subrack, ADD set the Configuration BRD(Mandatory) parameter MRFD-210301 Management
ISTCCENTR Remote TC AL Central
BSC6900
DHEU Temperature ISTMPCTRL Control
BSC6900
Whether the subrack is ADD a remote SUBRACK(Opti main TC Configuration onal) subrack MRFD-210301 Management Whether to control the temperatur e difference between the air inlet and air outlet and that between the air outlet and ambient by the temperatur e control system. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond SET ing BTSDHEUBP(O parameter ptional) in another GBFD-111202 O&M of BTS Whether to configure the transmissi on cabinet. The BTS uses this parameter to calculate O&M of BTS the number Intelligent SET of TRXs to Shutdown of BTSPSUFP(Opti be shut GBFD-111202 TRX Due to onal) down. GBFD-117804 PSU Failure
ISTRANCAB Tran. Cabinet CON Configured
BSC6900
ITEM
NCCELL No.
BSC6900
SET GCELLIDLEFD DBA1(Mandator y) SET GCELLIDLETD DBA1(Mandator y) SET GCELL2GBA1( Mandatory) SET GCELLHO2GBA 2(Mandatory) SET GCELLHOFDD BA2(Mandatory) SET GCELLHOTDD BA2(Mandatory)
Number of a row to be changed in Configuration a BA list MRFD-210301 Management
ITEMINDEX
Item Index
BSC6900
ITEMVALID
Item Valid
BSC6900
Reserved parameter for cells. There are 30 parameters of this type, which can be used as new SET parameters GCELLREV(Ma in later ndatory) versions. MRFD-210301 SET GCELLIDLEFD DBA1(Mandator y) SET GCELLIDLETD DBA1(Mandator y) SET GCELL2GBA1( Mandatory) SET GCELLHO2GBA 2(Mandatory) SET GCELLHOFDD BA2(Mandatory) SET Used for GCELLHOTDD parameter BA2(Mandatory) control MRFD-210301
Configuration Management
Configuration Management
ITEMVALUE Value
BSC6900
Value of a SET reserved GCELLREV(Ma parameter Configuration ndatory) for cells MRFD-210301 Management ADD IPPATH(Mandat ory) ADD ADJMAP(Manda tory) ADD Type of the TRMMAP(Mand adjacent atory) node GBFD-118605 IP QOS
ITFT
Interface Type
BSC6900
ITFType
Interface Type
BSC6900
Type of the interface. This is determined by the type of the protocol currently used by the BTS. Point-toPoint Protocol (PPP) is a data link protocol. Multilink PPP (MP) is a bandwidthon-demand protocol that binds multiple links together ADD according BTSIPRT(Mand to PPP atory) (also IMP called link BTSIPRT(Mand aggregatio atory) n). GBFD-118605 IP QOS
IUO
Concentric Attribute
BSC6900
Concentric cell attributes of TRX. If the cell where a TRX is located is configured as a concentric cell, set this parameter to OVERLAI D or UNDERLA ID as required. If the cell where a TRX is located is not configured as a concentric cell, the default value of SET this GTRXIUO(Mand parameter atory) is NONE. GBFD-113201 Concentric Cell PDCH Dynamic Adjustment Concentric Cell Load Sharing Adaptive Adjustment of Uplink and Downlink Channels
Dynamic Channel Conversion IUOCHNTRA Parameter of N Concentric Cell BSC6900
Conversio n policy of the dynamic channel of SET the GCELLPSCHM( concentric Optional) cell
IUOHODURA UO HO Valid TIME Time
BSC6900
The triggering of concentric circle handovers must meet the P/N criteria, that is, when P out of N measurem ent reports meet the condition for concentric circle handovers, a concentric circle handover is triggered. This parameter correspond SET s to the P GCELLHOIUO( in the P/N Optional) criteria. GBFD-113201 Concentric Cell
IUOHOSTATI UO HO Watch ME Time
BSC6900
The triggering of concentric circle handovers must meet the P/N criteria, that is, when P out of N measurem ent reports meet the condition for concentric circle handovers, a concentric circle handover is triggered. This parameter correspond SET s to the N GCELLHOIUO( in the P/N Optional) criteria. GBFD-113201 Concentric Cell
IUOTP
Cell IUO Type
BSC6900
Whether a cell is a normal cell, concentric cell, or enhanced dual band network cell. In a concentric cell, the coverage areas of different TRXs form concentric circles of different radiuses. Owing to different coverage areas of the overlaid and underlaid parts, the two parts ADD can be Concentric Cell GCELL(Optional logically GBFD-113201 Enhanced Dual) regarded GBFD-114402 Band Network Switch for the J0 tracing mark mismatchi ng alarm GBFD-118630 Ethernet OAM Abis MUX UDP MUX for GBFD-118604 A GBFD-118610 Transmission
J0 trace J0ALMSWIT mismatch alarm CH switch
BSC6900
SET OPT(Optional)
J0BYTE_FO RMAT J0 Byte Format
BSC6900
Byte display SET format of OPT(Mandatory) J0
J0 expected J0RXVALUE incept value
BSC6900
SET OPT(Optional)
Expected receiving value of J0. J0 byte, also called the trace byte of the regenerato r section on the optical port (RTIM), is one of the optical port interconne ction parameters . The BSC receives the peer J0 byte continuous ly. None
None
J0TXVALUE J0 transmit value BSC6900
SET OPT(Optional)
Sending value of J0. J0 byte, also called the trace byte of the regenerato r section on the optical port (RTIM), is one of the optical port interconne ction parameters that is continuous ly transmitted to the peer end. This parameter enables the peer end to check whether it is connected to the local end continuous None
None
J0TYPE
J0 type
BSC6900
SET OPT(Optional)
J0 type
None
None
J1 trace J1ALMSWIT mismatch alarm CH switch
BSC6900
SET OPT(Optional)
Switch for the J1 tracing mark mismatchi ng alarm None
None
BSC6900
Byte display SET format of OPT(Mandatory) J1
None
None
BSC6900
SET OPT(Optional)
Expected receiving value of J1. J1 byte, also called the trace byte of the highorder path on the optical port, is one of the optical port interconne ction parameters . The local end continuous ly receives the peer J1 byte. None
None
SET OPT(Optional)
Sending value of J1. J1 byte, also called the trace byte of the highorder path on the optical port, is one of the optical port interconne ction parameters transmitted to the peer end continuous ly. This parameter enables the peer end to check whether it is connected to the local end continuous ly. None
None
J1TYPE
J1 type
BSC6900
SET OPT(Optional)
J1 type
None
None
J2ALMSWIT J2 mismatch CH alarm switch
BSC6900
Switch for the J2 tracing SET mark COPTLNK(Optio mismatchi nal) ng alarm None Byte SET display COPTLNK(Optio format of nal) J2
None
BSC6900
None
None
J2MODE
J2 length
BSC6900
BSC6900
SET COPTLNK(Optio nal) SET COPTLNK(Optio nal)
Byte length of J2 None Expected receiving value of J2 None
None
None
SET COPTLNK(Optio Sending nal) value of J2 None
None
JAUTOADD
Automatic Append J Byte
BSC6900
A zero or a space used to fill in the J byte of the optical port based on the J byte of the peer equipment. If the J bytes are inconsisten t, an alarm related to J byte mismatch will be reported and the negotiation of the optical port may fail, SET thus OPT(Optional) leading to SET deterioratio COPTLNK(Optio n of the nal) services. None
None
JBF
LAPD Jitter Buffer Algorithm BSC6900
Whether to enable the LAPD Jitter Buffer algorithm. This algorithm adds a buffering adaptation layer under the LAPD layer at the receiving end. The function at this layer is to delay the I frame (first received, last sent) currently received. If an I frame is received within the delayed duration, the frame SET is sent to Abis BTSJBF(Mandat the LAPD Transmission ory) layer. In GBFD-118401 Optimization Default receive delay of the PS Jitter Buffer on the BTS. A greater value of this parameter indicates a longer endto-end SET delay for BTSOTHPARA( the PS Optional) service. GBFD-111612
JITBUFDELA PS Jitter Buffer Y Delay
BSC6900
Multi-Carrier Intelligent Voltage Regulation
JITBUFSWIT Jitter Buffer CH switch
BSC6900
Whether the LAPD Jitter Buffer is enabled on the BSC side GBFD-118601 Abis over IP Determine s whether the last three bits of K2 indicates the single end and the dual end None
K2MODE
K2 Mode
BSC6900
SET MSP(Optional)
None
KBIAS
K Bias
BSC6900
K offset used in K sequencin g. To reduce ping-pong handovers, the system performs K sorting based on the downlink receive level of the candidate cells. But before doing that, the system subtracts "K Bias" from the actual downlink receive HUAWEI I SET level of the Handover GCELLHOAD(O candidate GBFD-110601 HUAWEI II ptional) cells. GBFD-510501 Handover
KEEPALIVE
Keep-alive timer length[S]
BSC6900
ADD PPPLNK(Option al) ADD MPLNK(Optional )
LAC
Cell LAC
BSC6900
ADD GCELL(Mandato ry) ADD GEXT2GCELL( Mandatory) ADD GEXT3GCELL( Mandatory) SET FHO(Mandatory) ADD BTSAUTOPLAN (Mandatory) SET BTSAUTOPLAN CFG(Optional) ADD GCELLQUICKS ETUP(Mandator y)
Duration of the PPP/MP link keepalive timer None None Location area code (LAC). MSs can freely move in the local location area with no need of location update. Reasonabl e local allocation can effectively lighten the signaling load and improve the call completion rate. Can be input in hexadecim al format. The hexadecim al format is H'****, for example, Configuration H'1214. MRFD-210301 Management
LAC1
Cell LAC
BSC6900
Location area code (LAC). The MS can move within the local location area without location update. The reasonable classificati on of the location area is very important for reducing the signaling load and improving SET the putBTSAUTOPLAN through CFG(Optional) rate. GBFD-510702
Aggregation LACPMODE Mode
BSC6900
Aggregatio n mode. When this parameter is set to static aggregatio n, the LACP protocol is activated; otherwise, the LACP ADD protocol is ETHTRK(Manda deactivate Board tory) d. GBFD-111701 Switchover
LATIDECI
Latitude Decimal Part BSC6900
Decimal value when the latitude where a cell is located is indicated SET in the BSS-Based GCELLLCS(Man format of LCS (Cell ID + datory) degree GBFD-115402 TA) Decimal value when the longitude where a cell is located is indicated SET in the BSS-Based GCELLLCS(Man format of LCS (Cell ID + datory) degree GBFD-115402 TA) Integer value when the latitude where a cell is located is indicated SET in the BSS-Based GCELLLCS(Man format of LCS (Cell ID + datory) degree GBFD-115402 TA) Value of the minute part when the latitude is indicated in the format of SET degree_mi BSS-Based GCELLLCS(Man nute_seco LCS (Cell ID + datory) nd GBFD-115402 TA)
LATIDEGRE Latitude Degree E Part
BSC6900
LATIINT
Latitude Int Part
BSC6900
Latitude Minute LATIMINUTE Part
BSC6900
LATISECON Latitude Second DDECI Decimal Part
BSC6900
Decimal value of the second part when the latitude is indicated in the format of SET degree_mi BSS-Based GCELLLCS(Man nute_seco LCS (Cell ID + datory) nd GBFD-115402 TA) Integer value of the second part when the latitude is indicated in the format of SET degree_mi BSS-Based GCELLLCS(Man nute_seco LCS (Cell ID + datory) nd GBFD-115402 TA) Longitude of the GPS ADD receiver BSC/RNC GPS(Mandatory) antenna MRFD-210502 Clock Longitude of the GPS ADD receiver BSC/RNC GPS(Mandatory) antenna MRFD-210502 Clock
LATISECON Latitude Second DINT Int Part
BSC6900
LATITUDE
GPS antenna latitude
BSC6900
LATITUDES GPS antenna EC latitude
BSC6900
LATPRD
Delay measure period [100ms]
BSC6900
Delay statistics period. This parameter indicates the period to collect the statistics information about the link transmissi on delay. Note that the unit of this parameter is 100 millisecond s. The actual delay statistics period is the value of this parameter multiplied ADD by 100 IPLOGICPORT( millisecond Link Optional) s. MRFD-210103 aggregation
LATSUSTM
Delay adjust suspend period [LATTH]
BSC6900
Number of delay adjustment suspensio n periods. This parameter specifies the delay statistics periods in which the bandwidth is not adjusted when the bandwidth adjustment function of the logical port is triggered due to the change of the link transmissi on delay. This parameter can be used to ADD control the IPLOGICPORT( rate of the Optional) bandwidth None
None
LATTH
Rate down threshold for delay [ms]
BSC6900
Bandwidth reduction delay threshold. This parameter is used to trigger the function of bandwidth reduction at the logical port when the link delay exceeds ADD the value IPLOGICPORT( of this Optional) parameter. GBFD-118605 IP QOS
LATUDK
average delay down filter mantissa
BSC6900
Average delay ADD reduction IPLOGICPORT( filtering Optional) index Average delay ADD increase IPLOGICPORT( filtering Optional) index
GBFD-118605 IP QOS
LATUPK
average delay up filter mantissa BSC6900
GBFD-118605 IP QOS
LAYER
Layer of The Cell BSC6900
Layer where a cell is located. The network designed by Huawei has four layers: Umbrella (layer 4), Macro (layer 3), Micro (layer 2), and Pico(layer 1). Each layer can HUAWEI I SET be set with Handover GCELLBASICP 16 GBFD-110601 HUAWEI II ARA(Optional) priorities. GBFD-510501 Handover
LAYER
Layer of the cell
BSC6900
A network basically consists of four layers, namely, Umbrella, Macro, Micro, and Pico. Cell priorities influence the sorting of neighborin g cells during handovers as well as handover algorithms including PBGT and inter-layer handovers. For example, PBGT handovers can only occur among HUAWEI I ADD cells on a Handover GEXT2GCELL( same layer GBFD-110601 HUAWEI II Optional) and of a GBFD-510501 Handover
LAYHOLOAD Inter-Layer HO TH Load Threshold
BSC6900
When the load of the serving cell reaches the threshold, the interlayer handover algorithm takes effect. Through configurati on of the parameter, the handover to a lowerlayer cell for loadsharing is performed only when the load of the serving cell SET reaches a GCELLHOAD(O certain HUAWEI I ptional) level. GBFD-110601 Handover
Lb Congestion LBCongestPr Protection Timer otect1 1
BSC6900
Timer of increasing the Lb flow control level when the BSC receives an SMLC congestion indication. If the BSC receives another SMLC congestion indication before the timer expires, the flow control level ADD remains GEXTSMLC(Opt unchanged ional) . None Timer of decreasing the Lb flow control level. If no SMLC congestion indication is received within the valid period of the timer, the BSC decreases the flow control level by one until the flow control ADD level is GEXTSMLC(Opt decreased ional) to 0. None
None
Lb Congestion LBCongestPr Protection Timer otect2 2
BSC6900
None
LDRFOUH
LDR Fourth
BSC6900
SET LDR(Optional)
Fourth action taken for load control
GBFD-118601 Abis over IP GBFD-117301 Flex Abis
LDRFST
LDR First
BSC6900
SET LDR(Optional)
First action taken for load GBFD-118601 Abis over IP control GBFD-117301 Flex Abis
LDRSND
LDR Second
BSC6900
SET LDR(Optional) ADD M3LE(Mandator y) ADD M3DE(Mandator y) EXP LOG(Optional)
Second action taken for load control
LENO
Local entity No.
BSC6900
LEVEL
Log Level
BSC6900
The local entity number uniquely A over IP identifies a GBFD-118602 A IP over local entity. GBFD-118622 E1/T1 O&M of BSC Level of GBFD-111203 Security the log MRFD-210305 Management
LEVEL
Log Level Alarm Mask Switch
BSC6900
LEVEL
BSC6900
COL LOG(Optional) SET ALMML(Mandat ory)
Log level to be collected. Alarm mask switch
None
None
Level
MD LEVEL
BSC6900
Class of ADD the ETHMD(Optiona maintenan l) ce domain GBFD-118605 IP QOS
LEVELRPT
Level Report Switch
BSC6900
Processing of Whether to Measurement support the Report reporting Pre-processing SET of the main of GCELLBASICP diversity GBFD-110801 Measurement ARA(Optional) level GBFD-110802 Report Whether to allow interlayer and inter-level handovers. The interlayer and inter-level handover algorithm is achieved through the setting of different layers and priorities for cells, which switches traffic to cells of a higher precedenc e (decided by "Layer of the cell" HUAWEI I SET and "Cell Handover GCELLHOBASI priority" GBFD-110601 HUAWEI II C(Optional) together). GBFD-510501 Handover
LEVHOEN
Level HO Allowed BSC6900
Inter-layer HO LEVHOHYST Hysteresis
BSC6900
Hysteresis value during the handovers between cells on different layers or of different priorities. This value is used to suppress inter-layer ping-pong handovers. Inter-layer handover threshold of the serving cell = "Interlayer HO threshold" "Inter-layer HO Hysteresis" ; Inter-layer handover threshold HUAWEI I SET of a Handover GCELLHOBASI neighborin GBFD-110601 HUAWEI II C(Optional) g cell = GBFD-510501 Handover
LEVLAST
Layer HO Valid Time
BSC6900
The triggering of interlayer handovers must meet the P/N criteria, that is, when the condition for interlayer handovers is met for a consecutiv eP seconds during N seconds, an interlayer handover is triggered. This parameter correspond HUAWEI I ADD s to the P Handover G2GNCELL(Opti in the P/N GBFD-110601 HUAWEI II onal) criteria. GBFD-510501 Handover
LEVSTAT
Layer HO Watch Time BSC6900
The triggering of interlayer handovers must meet the P/N criteria, that is, when the condition for interlayer handovers is met for a consecutiv eP seconds during N seconds, an interlayer handover is triggered. This parameter correspond HUAWEI I ADD s to the N Handover G2GNCELL(Opti in the P/N GBFD-110601 HUAWEI II onal) criteria. GBFD-510501 Handover
LGCAPPTYP Logical function E type
BSC6900
ADD BRD(Optional) CON PATCH(Optional ) LOD PATCH(Optional ) LOD BRD(Optional)
Logical function type of the board OAM:Oper ation And Maintenan ce Process TDM_Swit ching:TDM switching process GCP:All the GCP subsystem s are configured as CPUS to act as the control plane processing subsystem s for GSM BSC RGCP:Sub system 0 of RGCP is configured as the MPU subsystem to act as Configuration the MRFD-210301 Management
LGCAPPTYP Logical function E type
BSC6900
Logical function type of the Configuration board MRFD-210301 Management
LGCAPPTYP Logic function E type
BSC6900
ADD PPPLNK(Manda tory) ADD Logical MPGRP(Mandat function ory) type
LGCUSAGE Application type TYPE of POUc_TDM
BSC6900
ADD BRD(Optional)
Application type of the POUc_TD Configuration M board MRFD-210301 Management
LGIDX
PbSL Logical Index
BSC6900
LHUMTHD
Lower Humidity Threshold
BSC6900
The Logical Index of PB ADD signaling PBSL(Optional) link GBFD-111203 O&M of BSC Lower humidity threshold for the environme nt alarm box to report an alarm indicating that the ambient humidity is too low. If the ambient humidity of the BTS is lower than this threshold, the environme nt alarm box reports the alarm. In multimode scenario, the value of this SET parameter BTSEXD(Option in this al) mode must GBFD-111202 O&M of BTS The occur threshold of 20258 alarm,you SET can set it LICALMTHD(Ma from 90% Faulty ndatory) to 99% MRFD-210304 Management The recover threshold of 20258 alarm,you SET can set it LICALMTHD(Ma from 90% ndatory) to 99%
LICALMCTH Alarm occur D threshold
BSC6900
LICALMRTH Alarm recover D threshold
BSC6900
LINKNO
Link No.
BSC6900
Key field used to LOP identify LAPDLNK(Mand one LAPD atory) link GBFD-111203 O&M of BSC
LISTTYPE
Query Type
BSC6900
Type of the parameters to be displayed when a cell template is queried. The value "DIFFERE NCE" indicates that the parameters in the cell template that are different from those in the default template are displayed. The value "ALL" indicates that all the parameters in the cell EXP template GCELLTEMPLA are TE(Optional) displayed. None
None
LKTATE
Link rate type
BSC6900
Rate type ADD of the A Interface MTP3LNK(Optio designated Protocol nal) link GBFD-111804 Process Lower limit SET for ALMPORT(Opti triggering Faulty onal) an alarm MRFD-210304 Management Lower limit of an alarm. It is valid for the analog Configuration port. MRFD-210301 Management
LL
Lower Limit
BSC6900
LL
Lower Limit
BSC6900
SET BTSENVALMP ORT(Optional)
LLCN
Channel No.
BSC6900
The loopback channel number when the port loopback mode is set to single SET channel E1T1LOP(Optio local nal) loopback
LNA1
LNA Threshold1
BSC6900
Upper threshold of the low noise amplifier. When the working voltage of the low noise amplifier attenuator in the RXU board is smaller than this value, an SET alarm is BTSRXUBP(Opt reported by ional) the BTS. GBFD-111202 O&M of BTS
LNA2
LNA Threshold2
BSC6900
Lower threshold of the low noise amplifier. When the working voltage of the low noise amplifier attenuator in the RXU board is greater than this value, an SET alarm is BTSRXUBP(Opt reported by ional) the BTS. GBFD-111202 O&M of BTS Optical interface tributary numbering method. This parameter indicates the sequence of tributaries in an SDH frame. None
LNKNUMMO Tributary DE Numbering
BSC6900
SET OPT(Optional)
None
LNKRATE
Semipermanent Link Rate
BSC6900
ADD Rate of the SemiSEMILINK(Optio semiperma Permanent nal) nent link GBFD-114701 Connection
LNKREDFLA Initial bearing G traffic active tag
BSC6900
Initial bearing tag of the M3UA link. This parameter can be set to either active mode or standby mode. For details about the relevant bearer tag, see the the parameter "Traffic ADD mode" of A over IP M3LNK(Optional the "ADD GBFD-118602 A IP over ) M3LKS". GBFD-118622 E1/T1
LNKSLSMAS Signalling link K mask
BSC6900
Link load sharing. In the value, the number of 1s (represent ed by n) determines the maximum number (2^n) of links for the load sharing. For example, B0000 indicates that up to one link is used for the load sharing, B0001 and B1000 indicate that up to two links are used for the load ADD sharing. A Interface MTP3LKS(Optio The Protocol nal) additional GBFD-111804 Process
LNKSLSMAS Signalling link K mask
BSC6900
Signaling link mask correspond ing to the M3UA link set. It is used for the M3UA link load sharing. It is valid only when the working mode of the signaling link set is set to load sharing. In the value, the number of 1s (represent ed by n) determines the maximum number (2^n) of links for ADD the load M3LKS(Optional sharing. ) For GBFD-118602 A over IP
Load handover LoadAccThre Load Accept s Threshold
BSC6900
If the load of a cell is lower than the value of this parameter, the cell can admit the users handed ADD over from GEXT2GCELL( other cells Optional) with higher ADD load. GEXT3GCELL( Otherwise, Optional) the cell HUAWEI I SET rejects Handover GCELLHOAD(O such GBFD-110601 HUAWEI II ptional) users. GBFD-510501 Handover
MSC Pool Load LOADBALAN Balancing CEALG Algorithm Select
BSC6900
Type of load balancing algorithm of the MSC Pool. Generally, the BSC6900 chooses an MSC according to the obtained network resource indication (NRI). In some cases, however, the BSC6900 cannot do so. Instead, the BSC6900 chooses a target MSC ADD according GCNOPERATO to a load R(Optional) balancing GBFD-117401 MSC Pool
LOADBROA DCASTPERI NC2 Load OD Broadcast Period BSC6900
Intervals that the BSC broadcasts a cell's traffic load to its neighbor cells. The uplink load and downlink load indicate the traffic situation of a cell. The uplink load = number of uplink TBFs carried on all PDCHs in a cell / total number of PDCHs in a cell x ("PDCH Uplink Multiplex SET Threshold" BSCPSSOFTPA /10) x RA(Optional) 100%. The GBFD-116201
LOADCURR Load Current ENTDIV Shunt Coefficient BSC6900
Load SET current BTSPMUBP(Opt shunt ional) coefficient GBFD-111202 O&M of BTS This parameter specifies whether to use the load handover or the SET enhanced GCELLHOAD(O load HUAWEI I ptional) handover. GBFD-110601 Handover
Enhanced Load LOADHOAD HO Allowed
BSC6900
LoadHoEn
Load Handover Support
BSC6900
This parameter specifies whether a traffic loadsharing handover is enabled. The load handover helps to reduce cell congestion , improve success rate of channel assignmen t, and balance the traffic load among cells, thus improving the network performan ce. The load handover HUAWEI I SET is used as Handover GCELLHOBASI an GBFD-110601 HUAWEI II C(Optional) emergency GBFD-510501 Handover Indicates that if a 2G neighborin g cell supports load handovers, the BSC adds the load information of the local cells in the signaling procedures related to HUAWEI I ADD this Handover GEXT2GCELL( neighborin GBFD-110601 HUAWEI II Optional) g cell. GBFD-510501 Handover
LoadHoEnExt Load Handover 2G Support
BSC6900
LoadHoEnExt Load Handover 3G Support
BSC6900
LOADHOPB Load HO PBGT GTMARGIN Threshold
BSC6900
Indicates that if a 3G neighborin g cell supports load handovers, the BSC adds the load information of the local cells in the signaling procedures related to HUAWEI I ADD this Handover GEXT3GCELL( neighborin GBFD-110601 HUAWEI II Optional) g cell. GBFD-510501 Handover If the path loss in the serving cell minus that in a handover candidate cell is not smaller than the parameter value, the handover to the candidate cell is allowed. The parameter loosens the requiremen t of the PBGT handover threshold when the load of the serving cell reaches a certain ADD level. G2GNCELL(Opti Some HUAWEI I onal) traffic that GBFD-110601 Handover
LOADHOPE Penalty Time on NTIME Load HO
BSC6900
After a load handover succeeds, the BSC punishes the former serving cell during "Penalty Time on Load HO" by subtracting "Penalty Value on Load HO" from the receive level of the former serving cell, thus HUAWEI I SET avoiding Handover GCELLHOFITP ping-pong GBFD-110601 HUAWEI II EN(Optional) handovers. GBFD-510501 Handover After a load handover succeeds, the BSC punishes the former serving cell during "Penalty Time on Load HO" by subtracting "Penalty Value on Load HO" from the receive level of the former serving cell, thus HUAWEI I SET avoiding Handover GCELLHOFITP ping-pong GBFD-110601 HUAWEI II EN(Optional) handovers. GBFD-510501 Handover
LOADHOPE Penalty Value on NVALUE Load HO BSC6900
LOADHOPE Load HO Step RIOD Period
BSC6900
When the load of a cell reaches or exceeds "Load HO Threshold" , all the calls that are using this cell as the serving cell generate handover requests at the same time, which will suddenly increase the load of the processor. Under some circumstan ces, congestion occurs in the cell, HUAWEI I SET which will Handover GCELLHOAD(O result in GBFD-110601 HUAWEI II ptional) call drop. GBFD-510501 Handover
LOADHOST EP
Load HO Step Level
BSC6900
In hierarchica l load handovers, starting from "Edge HO DL RX_LEV Threshold" , a "Load HO Step Level" is added to the upper handover threshold after every "Load HO Step Period". In this way, all the calls in the current serving cell whose receive level is in the range "Edge HO DL HUAWEI I SET RX_LEV Handover GCELLHOAD(O Threshold" GBFD-110601 HUAWEI II ptional) to "Edge GBFD-510501 Handover
HO Ratio of LOADHOUS Enhanced Load RRATIO HO Algorithm
BSC6900
This parameter specifies the ratio of the MSs that simultaneo usly perform a load handover. You can enlarge the ratio to accelerate the handover to a neighborin g cell for load sharing. Too large a ratio, however, causes the neighborin g cell to be congested. When a neighborin SET g cell is GCELLHOAD(O congested, HUAWEI I ptional) you need GBFD-110601 Handover
LOADOFFSE Load HO T Bandwidth
BSC6900
In the handover algorithm of the first generation, load handovers can be performed only when the receive level of the current serving cell is in the range "Edge HO DL RX_LEV Threshold" to "Edge HO DL RX_LEV Threshold" + "Load HO Bandwidth" . In the handover algorithm HUAWEI I SET of the Handover GCELLHOAD(O second GBFD-110601 HUAWEI II ptional) generation, GBFD-510501 Handover Whether to enable load poweroff. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS
LOADPWRO Load Power-off FFEN Allowed State
BSC6900
Cell Load LOADRESEL Reselection ALLOW Allowed
BSC6900
Whether to allow the cell load reselection . If this parameter is set to PERMIT and "NC2 Load Reselectio n Switch" is set to Support, the load of the target cell is involved in the algorithm for NC2 SET cell GCELLNC2PAR reselection A(Optional) . GBFD-116201 Threshold for allowing the MS to reselect a cell during load reelection. When the receive level of the serving cell is lower than this threshold, the load SET reselection GCELLNC2PAR is A(Optional) triggered. GBFD-116201
LOADRESEL Load Reselect MAXRXLEV Level Threshold
BSC6900
Load Reselection LOADRESEL Receive RXTHRSH Threshold BSC6900
When the uplink load or downlink load of the target cell is lower than this threshold, Networkit can Controlled Cell accept the Reselection MSs from (NC2) the serving GSM/WCDMA cell due to Interoperability SET load GBFD-116201 GSM/WCDMA GCELLNC2PAR reselection GBFD-114301 Load Based A(Optional) . GBFD-114322 Handover When the uplink load or downlink load of the cell exceeds this threshold, the load SET reselection GCELLNC2PAR decision is A(Optional) made. GBFD-116201 If this parameter is set to YES, the channel assignmen t algorithm II randomly selects the start range for channel traversal; otherwise, the algorithm selects the channel next to the channel assigned last time as the start SET point of GCELLCHMGA channel D(Optional) traversal. GBFD-111005
LOADRESEL STARTTHRS Load Reselection H Start Threshold BSC6900
LOADSHAR EALLOW
Balance Traffic Allowed
BSC6900
LOADSTATY Type of Cell Load PE Calculation BSC6900 TRM Load LOADTHSW Threshold switch BSC6900
This parameter specifies whether the dynamic PDCHs that have been converted into the PDCHs are considered during the calculation SET of the GCELLCHMGA current cell HUAWEI I D(Optional) load. GBFD-110601 Handover SET TRM load BSCABISPRIM threshold AP(Optional) switch None None Local BSC SET identity. It GBSCREDGRP( identifies a BSC Node Mandatory) BSC. GBFD-113725 Redundancy Local IP address of PPP link. The IP address of ADD the PPP PPPLNK(Manda link on the tory) BSC side. None
LocalBSCID
Local BSC ID
BSC6900
LOCALIP
None
LOCALIP
Local IP ADD address of MPGRP(Mandat the MP ory) group GBFD-111202 O&M of BTS
LOCALIP
ADD BTSPPPLNK(M andatory) IMP BTSPPPLNK(M andatory) ADD BTSMPGRP(Ma ndatory) IMP BTSMPGRP(Ma ndatory)
Local IP address of BTS PPP Abis IP over Link. GBFD-118611 E1/T1 Local IP address of BTS MLPPP Abis IP over Group. GBFD-118611 E1/T1
LOCALIP
LOCALNSVL I Local NSVL ID
BSC6900
ADD NSVLLOCAL(M Identifies a andatory) local NSVL GBFD-118603 Gb over IP Identifies the local port of the router. The setting of this parameter must be consistent with the ADD setting at SGSNROUTEIN the SGSN FO(Mandatory) side. GBFD-118603 Gb over IP ADD BTSLOCGRP(M andatory) ADD BTSRXU2LOCG RP(Mandatory) SWP BTSLOCGRP(M andatory) ADD BTSOBJALMSH LD(Mandatory) Number of the location group under the BTS. It is unique for each BTS. GBFD-510104 Multi-site Cell Number of a location group GBFD-510104 Multi-site Cell
LOCALPORT NO Local Port No.
BSC6900
Location Group LOCGRPNO No. Location Group LOCGRPNO No.
BSC6900
BSC6900
LOCINFOKE Filter of Location Y Information
BSC6900
The value of this parameter can include one or two conditions. "&" is used to concatenat e the conditions, and the records are obtained when the two conditions are matched. Conditions are written in the format of "name : value". "name" is the key of EXP location ALMLOG(Option information al) , "value" is STA the value ALMLOG(Option of location Faulty al) information MRFD-210304 Management
LOCIP1
First local IP address
BSC6900
Identifies the first local IP address that communic ates with the peer end. When it is set to 0, it is invalid. This IP address must be first configured on the correspond ADD ing A over IP SCTPLNK(Mand interface GBFD-118602 A IP over atory) board. GBFD-118622 E1/T1 Identifies the second local IP address that communic ates with the peer end. When it is set to 0, it is invalid. This IP address must be first configured on the correspond ADD ing A over IP SCTPLNK(Optio interface GBFD-118602 A IP over nal) board. GBFD-118622 E1/T1 Whether to lock all the SET non-default O&M of BSC OPLOCK(Mand local GBFD-111203 Security atory) accounts MRFD-210305 Management
LOCIP2
Second local IP address
BSC6900
LOCKST
Set Locked/Unlock
BSC6900
LOCPN
Local SCTP port No.
BSC6900
ADD Local A over IP SCTPLNK(Mand SCTP port GBFD-118602 A IP over atory) number GBFD-118622 E1/T1 SET Board start LODCTRL(Mand load Configuration atory) control MRFD-210301 Management
LODCTRL
Board Start Load Control. BSC6900
LODMODE
Loading Mode
BSC6900
LOD BTSSW(Optiona l) LOD Mode of BTSPATCH(Opt software ional) loading
LOGCTHD
Log control threshold
BSC6900
CPU usage threshold for log flow control. When the average CPU usage of sliding windows reaches or exceeds the threshold, SET log flow FCCPUTHD(Opt control is GSM Flow ional) triggered. GBFD-111705 Control
LOGCTHD
Log control threshold
BSC6900
SET FCMSGQTHD( Optional)
Packet queue usage threshold for log flow control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, log flow control is GSM Flow triggered. GBFD-111705 Control
LOGPORTFL AG Logic Port Flag
BSC6900
Whether the SCTP is bound to a logical port. For details, ADD see "ADD SCTPLNK(Mand IPLOGICP atory) ORT". None Logical port No. bound by the SCTP. For details, see the parameter "Logic port No." of the ADD "ADD SCTPLNK(Mand IPLOGICP atory) ORT". None
None
LOGPORTN O Logic Port No.
BSC6900
None
LOGPORTS Logic Port Slot N No.
BSC6900
Logical port slot No. bound by the SCTP. For details, see the parameter "Slot No." of the ADD "ADD SCTPLNK(Mand IPLOGICP atory) ORT". None
None
LOGRTHD
Log restore threshold
BSC6900
CPU usage threshold for recovery from log flow control. When the average CPU usage of sliding windows is lower than the threshold, SET log flow FCCPUTHD(Opt control is GSM Flow ional) triggered. GBFD-111705 Control
LOGRTHD
Log restore threshold
BSC6900
LOGSW
Log control switch BSC6900
Packet queue usage threshold for recovery from log flow control. When the average packet queue usage of smooth windows is lower than the threshold, SET log flow FCMSGQTHD( control is GSM Flow Optional) triggered. GBFD-111705 Control Whether to SET control the GSM Flow FCSW(Optional) log flow GBFD-111705 Control
LOGTYPE
Log File Type
BSC6900
The log COL type to be LOG(Mandatory) collected.
LOGTYPE
Log Type
BSC6900
Type of the log. "COMLOG " indicates a common STR log. BTSLOG(Manda "CMPLOG tory) " indicates ULD a BTSLOG(Manda compresse tory) d log. GBFD-111202 O&M of BTS
LONGIDECI
Longitude Decimal Part
BSC6900
Decimal value when the longitude where a cell is located is indicated SET in the BSS-Based GCELLLCS(Man format of LCS (Cell ID + datory) degree GBFD-115402 TA) Value of the degree part when the latitude is indicated in the format of SET degree_mi BSS-Based GCELLLCS(Man nute_seco LCS (Cell ID + datory) nd GBFD-115402 TA) Integer value when the longitude where a cell is located is indicated SET in the BSS-Based GCELLLCS(Man format of LCS (Cell ID + datory) degree GBFD-115402 TA) Value of the minute part when the longitude is indicated in the format of SET degree_mi BSS-Based GCELLLCS(Man nute_seco LCS (Cell ID + datory) nd GBFD-115402 TA)
LONGIDEGR Longitude Degree EE Part BSC6900
LONGIINT
Longitude Int Part BSC6900
LONGIMINU Longitude Minute TE Part BSC6900
Longitude LONGISECO Second Decimal NDDECI Part
BSC6900
Decimal value of the second part when the longitude is indicated in the format of SET degree_mi BSS-Based GCELLLCS(Man nute_seco LCS (Cell ID + datory) nd GBFD-115402 TA) Integer value of the second part when the longitude is indicated in the format of SET degree_mi BSS-Based GCELLLCS(Man nute_seco LCS (Cell ID + datory) nd GBFD-115402 TA) Latitude of the GP ADD receiver BSC/RNC GPS(Mandatory) antenna MRFD-210502 Clock Latitude of the GPS ADD receiver GPS(Mandatory) antenna MRFD-210502 STR BTSTST(Option al) Loop level MRFD-210301
LONGISECO Longitude NDINT Second Int Part
BSC6900
GPS antenna LONGITUDE longitude
BSC6900
LONGITUDE GPS antenna SEC longitude
BSC6900
BSC/RNC Clock Configuration Management
LoopLevel
Loop Level
BSC6900
LOOPMODE Loopback Type
BSC6900
Loop type 1. Local loop:Make loop test on the local board at system side, while the system platform will send test frames. 2. Remote loop:The remoteloop will be made by the device on the other side of the local board. In this case, the local board don't need to make loop opertation except Abis IP over STR sending E1/T1 FRPORTLOOP( test GBFD-118611 A IP over Mandatory) frames. GBFD-118622 E1/T1
LOOPSW
Loop Detect Switch
BSC6900
SET E1T1(Optional)
Loop Detect Switch
LOOPTYPE
Loop type
BSC6900
LOP Loopback LAPDLNK(Mand type of atory) LAPD link
LOOSESDC IBCA Loose Trx CHLOADTH SDCCH Load RED Threshold
BSC6900
LOPDIR
Loop Direction
BSC6900
When the load of an SDCCH on the TRX that is in loose frequency reuse and is in the compatible band of the BCCH is lower than this threshold, the IBCA SET SDCCH is (Interference GCELLCHMGA preferably Based Channel D(Optional) allocated. Direction GBFD-117002 Allocation) STR of an CALLRESLOP( external Mandatory) voice loop GBFD-111203 O&M of BSC
LOPLOC
Loop Position
BSC6900
Loopback point. There are 14 loopback points. Whether a loopback point is available depends on the subrack configurati on mode in the BSS and the transmissi on mode of each interface. The details are as follows: NSS Interface Unit: indicates the A interface board in STR various CALLRESLOP( configurati Mandatory) on modes, GBFD-111203 O&M of BSC
LOPT
Loop type
BSC6900
SET E1T1LOP(Mand Loopback atory) type
None
None
LOPT
Loop type.
BSC6900
LOPTIME
Loop Time
BSC6900
SET OPTLOP(Manda tory) STR CALLRESLOP( Optional)
Loopback type None None Time of an external voice loop GBFD-111203 O&M of BSC
Suspend times after bandwidth LOSTSUSTM adjusted
BSC6900
Number of suspensio n periods after the bandwidth adjustment is performed based on the packet drop ratio. This parameter specifies the delay statistics periods in which the bandwidth is not adjusted when the bandwidth adjustment function of the logical port is triggered due to the change of the packet ADD drop ratio. IPLOGICPORT( This Optional) parameter None
None
LOWLEVSU Low-level Sublink BRESPREE Resource MPTFLG Preempt Switch BSC6900
Whether to permit the preemption of lowerlevel sublink resources. If the value of this parameter is YES, a CS domain service can preempt the sublink resources of the PS domain services on the lower-level BTS of the cascaded BTSs when the CS domain service fails to preempt the sublink SET of the GCELLSOFT(O correspond ptional) ing level. GBFD-117301 Flex Abis
LOWLEVSU BRESPREE Low Lev Sub Res MPTFLG Preempt Flag BSC6900
The CS services are preferred. This parameter indicates that the CS services are permitted to preempt the dynamic Abis resources on the SET sublink of BTSFLEXABISP the current ARA(Optional) level site. GBFD-117301 Flex Abis
LOWNOISES Diversity LNA WH Bypass Permitted BSC6900
Whether to permit the low noise SET amplifier GCELLOTHBAS (LNA) IC(Optional) bypass GBFD-111202 O&M of BTS Whether to assign overlay channels in an IUO cell based on the SET receive GCELLCHMGA level D(Optional) conditions GBFD-113201 Concentric Cell
LOWRXLEV Allocate OL OLFORBIDS Channel Based WITCH on RX Level
BSC6900
LOWTEMPL Low Temperature OADPWROF StartLoadPowerF off Allowed State BSC6900
Whether to power off the TRX in the case of overlow temperatur e of the BTS cabinet. If this parameter is set to "Yes", the BTS powers off the TRX and reports a "Load Power Off Alarm" to protect the TRX in the case of overlow temperatur e of the BTS cabinet. When the cabinet temperatur SET e returns to BTSAPMUBP(O 0 celsius ptional) degree, the GBFD-111202 O&M of BTS
LOWTEMPL Low Temperature OADPWROF StartLoadPowerF off Allowed State BSC6900
Whether to power off the TRX of a BTS when the temperatur e of the BTS cabinet is too low. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS STR TRANSPERFTS Loopback T(Mandatory) mode
LPBKMODE Loop Back Mode BSC6900
LPN
IP Logic Port No. BSC6900
Number of the IP ADD logical port IPPATH(Mandat that carries ory) the IP path GBFD-118605 IP QOS
LPN
Logic port No.
BSC6900
ADD Logical IPLOGICPORT( port Optional) number
None
None
LPN
Logic port No.
BSC6900
SET Logical BTSIP(Mandator port y) number
None
None
LPNSN
IP Logic Port Slot No. BSC6900
Number of the IP ADD logical port IPPATH(Mandat that carries ory) the IP path GBFD-118605 IP QOS ADD IPLOGICPORT( Type of Mandatory) logical port None None It is applicable to the radio transmissi on environme nt to improve the link quality. Link adaptation (LA) indicates adjusting the coding mode of the channel dynamicall y according to the transmissi on quality of the link. The link transmissi on quality is measured SET by the GCELLEGPRSP 8PSK ARA(Optional) MEAN GBFD-114201 EGPRS
LPNTYPE
Type of the logic port
BSC6900
LQCMODE
Link Quality Control Mode
BSC6900
LSDF
Load Shutdown Flag
BSC6900
Whether to enable power shutdown upon low voltage of the battery. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSAPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS
LSDV
Load Shutdown Voltage
BSC6900
Load power-off voltage threshold. If "Load Shutdown Flag" is set to "Enable" and the load voltage is lower than the value of this parameter, the load is automatica lly powered off. In multimode scenario, the value of this parameter in one mode must be the same as the value of the SET correspond BTSAPMUBP(O ing ptional) parameter GBFD-111202 O&M of BTS
LSRTRD
LDR Third
BSC6900
SET LDR(Optional)
Third action taken for load control
LSTCMD
Whether Include List Command
BSC6900
EXP LOG(Optional)
Whether to include the O&M of BSC list GBFD-111203 Security command MRFD-210305 Management
LstFormat
Result list format BSC6900
Query results can be displayed CMP vertically TBLDATA(Optio or Configuration nal) horizontally MRFD-210301 Management
Result List LSTFORMAT Format
BSC6900
EXP BTSIPPARA(Op tional) EXP BTSVLAN(Optio nal) EXP BTSDEVIP(Opti onal) EXP BTSPPPLNK(O ptional) EXP BTSMPGRP(Op tional) EXP BTSMPLNK(Opt ional) EXP Format of BTSIPRT(Optio the result nal) list
LT
Load type
BSC6900
LOD BRD(Optional)
Loading type
LT
Log Type
BSC6900
SET O&M of BSC LOGLIMIT(Mand Type of the GBFD-111203 Security atory) log MRFD-210305 Management O&M of BSC EXP Type of the GBFD-111203 Security LOG(Mandatory) log MRFD-210305 Management
LT
Log Type
BSC6900
LTCP
Low Temperature Critical Point BSC6900
Temperatu re control threshold for low temperatur e. When the ambient temperatur e is less than "Low Temperatu re Critical Point", the temperatur e control system needs to control the temperatur e difference between the air inlet and air outlet, and that between the air inlet and ambient SET temperatur BTSDHEUBP(O e. ptional) In multiGBFD-111202 O&M of BTS
LTEMTHD
Lower Temperature Threshold
BSC6900
Lower temperatur e threshold for the environme nt alarm box to report an alarm indicating that the ambient temperatur e is too low. If the ambient temperatur e of the BTS is lower than this threshold, the environme nt alarm box reports the alarm. In multimode scenario, the value SET of this BTSEXD(Option parameter al) in this GBFD-111202 O&M of BTS
Uplink Long-term LTFERLOWT FER Lower H Threshold BSC6900
Lower voice quality threshold associated with the automatic adjustment of the AMR handover uplink threshold;T he value of this parameter must be smaller than or equal to the value of Uplink SET Long-term GCELLCCAMR( FER Optional) Target. GBFD-115506
LTFERTGT
Uplink Long-term FER Target BSC6900
Target voice quality value associated with the automatic adjustment of the uplink SET threshold GCELLCCAMR( of AMR Optional) handover GBFD-115506
Uplink Long-term FER Upper LTFERUPTH Threshold BSC6900
Upper voice quality threshold associated with the automatic adjustment of the AMR SET handover GCELLCCAMR( uplink Optional) threshold GBFD-115506
Uplink Threshold LTTHADJFA Adjust Factor BSC6900
Factor of uplink threshold adjustment . It indicates the linear relation between the threshold adjustment value and SET the GCELLCCAMR( logarithmic Optional) FER. GBFD-115506
Number of DSPs LVDS252DS with 252 LVDS PNUM Links BSC6900
Number of DSPs, each of which carries 252 LVDS links on the DPUd or DPUb board. If this parameter is set to 0, every DSP SET carries 192 DSPLVDSMOD LVDS links Voice Fault E(Mandatory) by default. GBFD-119301 Diagnosis
Lvl1Vswr
Lvl1 Vswr
BSC6900
The level 1 Voltage Standing Wave Ratio (VSWR) threshold. When the VSWR is higher than this parameter, the TRX will report a level-1 VSWR alarm. At this time, the BTS can provide services but its SET coverage BTSRXUBP(Opt rate ional) decreases. GBFD-111202 O&M of BTS The level 2 Voltage Standing Wave Ratio (VSWR) threshold. When the VSWR is higher than this parameter, the TRX will report a level-2 VSWR alarm. At this time, the BTS disables power amplificatio SET n and fails BTSRXUBP(Opt to provide ional) services. GBFD-111202 O&M of BTS
Lvl2Vswr
Lvl2 Vswr
BSC6900
LVSDF
Low Voltage Shutdown Flag
BSC6900
Whether "Shutdown Voltage" is valid. In multimode base station scenario, the value of this parameter in different modes must be the same for the SET same multiO&M of BTS BTSAPMUBP(O mode base GBFD-111202 BTS Power ptional) station. GBFD-111601 Management
M3UASRVP N
M3UA service listening port No. BSC6900
MAC
MAC Address
BSC6900
Number of the M3UA SET service SCTPSRVPOR listening T(Optional) port GBFD-118602 A over IP ADD MAC XPUVLAN(Mand address of Configuration atory) the VLAN MRFD-210301 Management
MACEAAT
MAC Frame Error Alarm Threshold BSC6900
When the number of error frames on the MAC layer reaches the value of this parameter, the frame SET error alarm BTSETHPORT( is Optional) generated. GBFD-118630 Ethernet OAM When the number of error frames on the MAC layer decreases to the value of this parameter, SET the frame BTSETHPORT( error alarm Optional) is cleared. GBFD-118630 Ethernet OAM
MACEADT
MAC Frame Error Alarm Clearance Threshold BSC6900
MACODING MOD
ARFCN Coding Scheme
BSC6900
Coding mode in which an ARFCN is sent to an MS during an assignmen t or handover. If the parameter is set to CA_MA, an ARFCN is indicated through the CA and MA information contained in an assignmen t or handover command. If the parameter is set to Frequency _List, an SET ARFCN is GCELLSOFT(O indicated ptional) through the GBFD-113701
MAIDX
MA Index
BSC6900
ADD ETHMA(Mandat ory) ADD ETHMEP(Mand atory) PING MAC(Mandatory ) TRC MAC(Mandatory )
Identifies a maintenan ce group. Maintenan ce group: maintenan ce alliance (MA), which is a component of the maintenan ce domain (MD). Maintenan ce domain is an Ethernet or a component of an Ethernet in which the connectivit y failure manageme nt is performed. The maintenan ce domain is uniformly managed None
None
MAINBCCHP Power Derating WDTACTCH Active Channel EN Enabled
BSC6900
When this parameter is set to YES, the BSC6900 is allowed to reduce the transmit power of the nonBCCH timeslots SET on the GCELLOTHEXT BCCH (Optional) TRX. GBFD-111609
Enhanced BCCH Power Consumption Optimization
MAINBCCHP Power Derating WRDTEN Enabled
BSC6900
MAINBCCHP Power Derating WRDTETIME End Time
BSC6900
This parameter specifies whether to enable the Enhanced BCCH Power Consumpti on Optimizatio n feature. Generally, the BCCH TRX transmits signals at the maximum transmit power. When this parameter is set to YES, the BSC6900 is allowed to reduce the transmit power of Enhanced SET the nonBCCH Power GCELLOTHEXT BCCH idle Consumption (Optional) timeslots GBFD-111609 Optimization This parameter specifies the end time of the period during which the power of the nonBCCH timeslots on the Enhanced SET BCCH BCCH Power GCELLOTHEXT TRX is Consumption (Optional) derated. GBFD-111609 Optimization
MAINBCCHP WRDTRANG Power Derating E Range
BSC6900
MAINBCCHP Power Derating WRDTSTIME Start Time
BSC6900
This parameter specifies the range of power derating over the non-BCCH timeslots Enhanced SET on the BCCH Power GCELLOTHEXT BCCH Consumption (Optional) TRX. GBFD-111609 Optimization This parameter specifies the start time of the period during which the power of the nonBCCH timeslots on the Enhanced SET BCCH BCCH Power GCELLOTHEXT TRX is Consumption (Optional) derated. GBFD-111609 Optimization Bar code 1 of the interface board of the BTS. This parameter is the electronic serial number of the active PTU board. An electronic serial number uniquely identifies an PTU board. This parameter ADD is set BTSESN(Manda before tory) delivery. GBFD-118630 Ethernet OAM
MAINDEVTA BTS Interface B Board Bar Code 1 BSC6900
MAINDEVTA PTU Main Dev. B Tab
BSC6900
Bar code 1 ADD of the BTS BTSAUTOPLAN interface (Mandatory) board GBFD-118601 Abis over IP Number of main location group. Each cell contains only one ADD main BTSBINDLOCG location RP(Mandatory) group. GBFD-510104 Multi-site Cell Number of the port to which the active OML of the BTS is connected MRFD-210206 Tree Topology
MAINLOCGR Main Location PNO Group No.
BSC6900
MAINPORTN O Main Port No
BSC6900
ADD BTS(Optional)
MainVer
Main Version No.of TMU
BSC6900
Main version No. of the TMU board software. It is configured SET according BTSAUTODLDA to the CTINFO(Mandat actual ory) situation. GBFD-111202 O&M of BTS Mobile allocation index offset 1. Start frequency number, which is the number of the frequency where SET frequency GCELLMAIOPL hopping AN(Optional) starts GBFD-117002
MAIO1
MAIO 1
BSC6900
MAIO10
MAIO 10
BSC6900
Mobile allocation index offset 10. Start frequency number, which is the number of the frequency where SET frequency GCELLMAIOPL hopping AN(Optional) starts GBFD-117002 Mobile allocation index offset 11. Start frequency number, which is the number of the frequency where SET frequency GCELLMAIOPL hopping AN(Optional) starts GBFD-117002 Mobile allocation index offset 12. Start frequency number, which is the number of the frequency where SET frequency GCELLMAIOPL hopping AN(Optional) starts GBFD-117002
MAIO11
MAIO 11
BSC6900
MAIO12
MAIO 12
BSC6900
MAIO2
MAIO 2
BSC6900
MAIO3
MAIO 3
BSC6900
MAIO4
MAIO 4
BSC6900
MAIO5
MAIO 5
BSC6900
MAIO6
MAIO 6
BSC6900
MAIO7
MAIO 7
BSC6900
MAIO8
MAIO 8
BSC6900
Mobile allocation index offset 8. Start frequency number, which is the number of the frequency where SET frequency GCELLMAIOPL hopping AN(Optional) starts GBFD-117002 Mobile allocation index offset 9. Start frequency number, which is the number of the frequency where SET frequency GCELLMAIOPL hopping AN(Optional) starts GBFD-117002
MAIO9
MAIO 9
BSC6900
Feed Tri. 0 TMA MAJORALM Over Critical UP0 Alarm Threshold
BSC6900
Critical alarm threshold against excessive TMA feed current of feed tributary 0. When the actual current is greater than the specified Faulty value, a Management TMA feed Connection current with TMA SET critical (Tower BTSDATUBP(O alarm is MRFD-210304 Mounted ptional) generated. MRFD-210601 Amplifier)
BSC6900
Critical alarm threshold against excessive TMA feed current of feed tributary 1. When the actual current is greater than the specified Faulty value, the Management TMA feed Connection current with TMA SET critical (Tower BTSDATUBP(O alarm is MRFD-210304 Mounted ptional) generated. MRFD-210601 Amplifier) Critical alarm threshold against excessive TMA feed current of feed tributary 2. When the actual current is greater than the specified Faulty value, the Management TMA feed Connection current with TMA SET critical (Tower BTSDATUBP(O alarm is MRFD-210304 Mounted ptional) generated. MRFD-210601 Amplifier)
BSC6900
BSC6900
Critical alarm threshold against excessive TMA feed current of feed tributary 3. When the actual current is greater than the specified Faulty value, the Management TMA feed Connection current with TMA SET critical (Tower BTSDATUBP(O alarm is MRFD-210304 Mounted ptional) generated. MRFD-210601 Amplifier) Critical alarm threshold against excessive TMA feed current of feed tributary 4. When the actual current is greater than the specified Faulty value, the Management TMA feed Connection current with TMA SET critical (Tower BTSDATUBP(O alarm is MRFD-210304 Mounted ptional) generated. MRFD-210601 Amplifier)
BSC6900
BSC6900
Critical alarm threshold against excessive TMA feed current of feed tributary 5. When the actual current is greater than the specified Faulty value, the Management TMA feed Connection current with TMA SET critical (Tower BTSDATUBP(O alarm is MRFD-210304 Mounted ptional) generated. MRFD-210601 Amplifier) ADD ETHMA(Mandat ory) PING BTSCFM(Manda tory) TRC BTSCFM(Manda Name of tory) the MA ADD BTSETHMA(Ma ndatory) ADD BTSETHLCMEP (Mandatory) ADD BTSETHRMME P(Mandatory)
MANAME
MA Name
BSC6900
MANAME
MA Name
BSC6900
Name of the maintenan ce Ethernet OAM association GBFD-118630 Configuration . MRFD-210301 Management
MASK
Subnet mask
BSC6900
Subnet mask correspond ing to the local IP ADD address of PPPLNK(Manda the PPP tory) link None Subnet mask of ADD the MP MPGRP(Mandat group in ory) BSC.
None
MASK
Subnet mask
BSC6900
MASK
Subnet mask
BSC6900
ADD ETHIP(Mandator y) ADD Subnet EMSIP(Mandato mask of ry) the board
MASK
Packet source mask
BSC6900
Mask of the source IP network segment of the packet ADD against the ICMPGUARD(M ICMP andatory) attack None ADD IPRTBIND(Man datory) ADD ETHTRKIP(Man Subnet datory) mask ADD Subnet GCBSADDR(Ma mask of ndatory) the CBC SET BTSETHPORT( Optional) IMP IP subnet BTSDEVIP(Opti mask of a onal) BTS port ADD BTSPPPLNK(M andatory) IMP BTSPPPLNK(M andatory) ADD BTSMPGRP(Ma ndatory) IMP BTSMPGRP(Ma ndatory)
None
MASK
Subnet mask
BSC6900
None
None
MASK
Mask
BSC6900
Short Message Service Cell Broadcast GBFD-113601 (TS23)
MASK
IP Mask
BSC6900
GBFD-118601 Abis over IP
MASK
Subnet Mask
BSC6900
Subnet mask of BTS PPP link. Subnet mask of BTS MLPPP Group.
Abis IP over GBFD-118611 E1/T1
MASK
Subnet Mask
BSC6900
Master Clock MASTERIPA Server IP DDR Address
BSC6900
IP address of the main clock server. It must be a legal A/B/C type address but not a broadcast ADD address or BTSAUTOPLAN network (Mandatory) address. GBFD-118606 Clock over IP It must be the valid address of the A, B, or C type and cannot be the broadcast SET address or BTSIPCLKPAR network A(Mandatory) address. GBFD-118606 Clock over IP Step of upward power adjustment according to the quality of SET the Enhanced GCELLPWR2(O received Power Control ptional) signals GBFD-110703 Algorithm
MASTERIPA Clock Server IP DDR Address 1
BSC6900
MAXADJPCV MAX Up Adj. PC AL Value by Qual.
BSC6900
MAXASSOC Association max RETR retrans
BSC6900
If the number of the association retransmis sions exceeds this value, the parameter is deleted automatica lly. The value must be greater ADD than Path SCTPLNK(Optio max nal) retrans. GBFD-118602 A over IP
MAXBW
Max bandwidth [64kbps]
BSC6900
MAXCNTNU MAX Consecutive M HO Times BSC6900
Maximum bandwidth for dynamic ADD adjustment IPLOGICPORT( at the Optional) logical port Number of consecutiv e intra-cell handovers allowed in a cell. When the interval between two intracell handovers is lower than a certain time threshold, these two intra-cell handovers are considered consecutiv e. When a certain number of intra-cell handovers occur consecutiv ely, intraSET cell GCELLHOAD(O handovers ptional) will be
IP Fault Detection Based on BFD GBFD-118609 Link MRFD-210103 aggregation
Retry Times of MaxDlAssRet Downlink TBF ryTimes Reassignment
BSC6900
Maximum number of attempts to resend the downlink SET assignmen BSCPSSOFTPA t RA(Optional) messages GBFD-114101 GPRS
Retry Times of MaxDlEstRetr Downlink TBF yNum Establishment
BSC6900
Number of attempts to reestablish SET the BSCPSSOFTPA downlink RA(Optional) TBF GBFD-114101 GPRS This parameter specifies the largest step of SET each TRX BTSBAKPWR(O power Active Backup ptional) reduction. GBFD-111605 Power Control Maximum number of TRXs that can be configured for one cell. For the BTS3900B GSM, when the "Frequenc y and BSIC Plan Switch" is ON, the "Maximum TRX Number" (one or two, one by default) can be selected. For the BTS3900E GSM, Compact BTS when the Automatic ADD "Capacity Configuration BTSAUTOPLAN and and Planning (Mandatory) Coverage PICO SET Optimize Automatic BTSAUTOPLAN Switch" is GBFD-510701 Configuration CFG(Optional) OFF, the GBFD-510601 and Planning
MAXDROPP WRTHRESH Max Drop Power OLD Threshold BSC6900
Maximum TRX MAXFQNUM Number
BSC6900
MAXFQNUM Maximum TRX 1 Number
BSC6900
Maximum number of TRXs that can be configured for one cell. For the BTS3900B GSM, when the "Frequenc y and BSIC Plan Switch" is ON, the "Maximum TRX Number" (one or two, one by default) can be selected. For the BTS3900E GSM, when the "Capacity and Coverage SET Optimize BTSAUTOPLAN Switch" is CFG(Optional) OFF, the GBFD-510702
MAXFRAME Maximum Frame LEN Length[byte] BSC6900
Maximum ADD multiplexin IPMUX(Optional g frame ) length. GBFD-118605 IP QOS
Max BTS Num of MAXLOADB Parallel Software TSNUM Load BSC6900
Maximum number of BTSs that are allowed to concurrentl y download software under a BSC GBFD-111202 O&M of BTS
PPP mux max MAXMFLEN mux-frame length BSC6900
The value of this parameter cannot be less than the maximum PPPMUX sub-frame length (MUXMAX SFL). This parameter can be associated with the maximum segment length of the MP to control whether to segment the multiplexed MP. To enable the PPPMUX, the number of subframes Abis MUX ADD must be UDP MUX for PPPLNK(Option more than GBFD-118604 A al) or equal to GBFD-118610 Transmission
PPP mux max MAXMFLEN mux-frame length BSC6900
Maximum length of Abis IP over ADD the PPP E1/T1 MPGRP(Optiona multiplexin GBFD-118611 A IP over l) g frame GBFD-118622 E1/T1
MaxMissTime Maximum Retry s Times
BSC6900
Maximum number of retries SET when the PWDPOLICY(O user logs Security ptional) in MRFD-210305 Management Maximum capacity SET for storing ALMCAPACITY( the alarm Faulty Optional) log MRFD-210304 Management Maximum SET output BTSDPMUBP(O power of ptional) the diesel
MAXNUM
Max Alarm Log Number
BSC6900
MAXOUTPU Diesel Max TPOWER Output Power
BSC6900
MAXPATHR ETR Path max retrans BSC6900
If the number of the path retransmis sions exceeds this value, the parameter is deleted automatica lly. The value must be smaller than ADD Associatio SCTPLNK(Optio n max nal) retrans. GBFD-118602 A over IP
Pb Link Check MaxPbLinkC Max TimeOut hkNum Number
BSC6900
Retransmi ssion times of Pb link check (LapdChec k) messages. When a BSC sends a Pb link check message to an external PCU and fails to receive a response from the external PCU, it retransmits the message. This parameter indicates the maximum times for the PB link check message to be GBFD-114101 GPRS
MAXPDCHN Maximum UM Number of PDCH BSC6900
Maximum number of PDCHs SET that can be PDCH GTRXBASE(Opt assigned Dynamic ional) in the TRX GBFD-113101 Adjustment
Maximum Rate MAXPDCHR Threshold of ATE PDCHs in a Cell
BSC6900
Maximum value of the PDCH ratio in a cell. The number of available TCHs and PDCHs in a cell is set to a fixed value. The PDCH ratio is: Number of available PDCHs/(N umber of available TCHFs + Number of available static PDCHs). This parameter is used to SET restrict the GCELLPSCHM( PDCH Optional) ratio.
Retry Times of MaxPollingRe Downlink TBF tryTimes Polling MAXPROMP Expire Prompt TDATES Dates
BSC6900
BSC6900
Maximum number of attempts to SET resend the BSCPSSOFTPA polling RA(Optional) messages GBFD-114101 GPRS SET Expire PWDPOLICY(O Prompt Security ptional) Dates. MRFD-210305 Management
MAXRECHA RGECURRE Charge NT Coefficient
BSC6900
Maximum current coefficient when the battery is charged. When the battery is charged, the maximum current can be 0.01 to 0.99 times of the capacity of the battery cabinet. That is, the charge coefficient is 0.010.99. For example, if the capacity of the battery cabinet is 200 A and the charge coefficient SET is 0.15, the BTSPMUBP(Opt maximum ional) charge GBFD-111202 O&M of BTS
MAXRECHA RGECURRE Charge NT Coefficient
BSC6900
Maximum current coefficient when the battery is charged. When the battery is charged, the maximum current can be 0.05 to 0.25 times of the capacity of the battery cabinet. That is, the charge coefficient is 0.050.25. For example, if the capacity of the battery cabinet is 200 A and the charge coefficient SET is 0.15, the BTSDPMUBP(O maximum ptional) charge GBFD-111202 O&M of BTS
Max Resend MAXRESEN Times of D Phy.Info.
BSC6900
Maximum times for a Physical Information message to be transmitted . When the retransmis sion times exceeds this parameter and the BTS still cannot receive any correct SAMB frame from the MS, the BTS sends a connection failure message (including the handover failure information HUAWEI I SET ) to the Handover GCELLHOAD(O BSC, GBFD-110601 HUAWEI II ptional) which GBFD-510501 Handover
Max Retransmissions MAXRETRA for Radio Priority NS1 1 BSC6900
Maximum retransmis sion for radio priority 1. The 2bit Radio Priority message carried by the MS in the Packet Channel Request message has four levels of priorities. Level 1 is the highest priority, and level 4 SET is the GCELLPRACH( lowest Optional) priority. GBFD-119110 Access Maximum retransmis sion for radio priority 2. The 2bit Radio Priority message carried by the MS in the Packet Channel Request message has four levels of priorities. Level 1 is the highest priority, and level 4 SET is the GCELLPRACH( lowest Optional) priority. GBFD-119110 Access
Maximum retransmis sion for radio priority 3. The 2bit Radio Priority message carried by the MS in the Packet Channel Request message has four levels of priorities. Level 1 is the highest priority, and level 4 SET is the GCELLPRACH( lowest Optional) priority. GBFD-119110 Access Maximum retransmis sion for radio priority 4. The 2bit Radio Priority message carried by the MS in the Packet Channel Request message has four levels of priorities. Level 1 is the highest priority, and level 4 SET is the GCELLPRACH( lowest Optional) priority. GBFD-119110 Access
MAXSFLEN
PPP mux max sub-frame length BSC6900
Maximum PPPMUX sub-frame length. If the PPP frame length is larger than this value, the PPPMUX multiplexin g is performed. The value of this parameter cannot be larger than the maximum multiplexed frame length wMuxMfl. To enable the PPPMUX, the number of subframes Abis IP over ADD must be E1/T1 PPPLNK(Option more than GBFD-118611 A IP over al) or equal to GBFD-118622 E1/T1
MAXSFLEN
PPP mux max sub-frame length BSC6900
Maximum length of Abis IP over ADD the PPP E1/T1 MPGRP(Optiona multiplexin GBFD-118611 A IP over l) g frame GBFD-118622 E1/T1
MAXSTEP0
MAX Down Adj.Value Qual.Zone 0
BSC6900
Huawei power control algorithm II divides three quality zones according to the quality of the receive signals. When the power is downwardl y adjusted according to the level, the maximum downward adjustment step can vary according to the quality of the received signals. SET This Enhanced GCELLPWR2(O parameter Power Control ptional) specifies GBFD-110703 Algorithm
MAXSTEP1
BSC6900
MAXSTEP2
BSC6900
MAXTA
Max TA
BSC6900
This parameter specifies the actual coverage area of a cell. After receiving the channel request message or handover access message, the BTS determines whether the channel assignmen t or handover is performed in the cell by comparing the TA and Adjustment of the value Adaptive SET of this Timing GCELLBASICP parameter. GBFD-110901 Advance ARA(Optional) The value GBFD-114001 Extended Cell Number of measurem ent reports (MRs) used for averaging the time SET advance GCELLCCAD(O before the ptional) call drops GBFD-111004 Whether to initiate a forcible call drop when the time advance exceeds SET "MAX TA GCELLCCAD(O Drop Call ptional) Threshold" GBFD-111004
MAXTADRO PCALLFILTE MAX TA Drop R Call Filter
BSC6900
MAXTADRO PCALLSWIT Max TA Drop Call CH Switch BSC6900
MAXTADRO PCALLTHRE MAX TA Drop SHOLD Call Threshold
BSC6900
Whether the time advance after filtering exceeds the threshold. If the threshold is exceeded, SET a forcible GCELLCCAD(O call drop is ptional) initiated. GBFD-111004
MAXTIME
Maximum time for posave BSC6900
STR Maximum POSAVE(Option positioning BSC/RNC al) time. MRFD-210502 Clock Maximum number of (16 kbit/s) Abis timeslots that the SET PDCHs GTRXBASE(Opt can use in ional) the TRX GBFD-117301 Flex Abis Maximum TTL value TRC of the sent IPADDR(Option TRACERT al) packet None
Maximum Number of Occupied Abis MAXTSOCP Timeslots
BSC6900
MAXTTL
MAX TTL
BSC6900
None
MAXVALADJ MAX Up Adj. PC RX Value by RX_LEV BSC6900 MAXVALIDD Maximum Valid ATES Dates
BSC6900
Step of upward power adjustment according to the quality of SET the Enhanced GCELLPWR2(O received Power Control ptional) signals GBFD-110703 Algorithm SET Maximum PWDPOLICY(O Valid Security ptional) Dates. MRFD-210305 Management
MBFD Check MBFDCHKN Index
BSC6900
Detection index. The index is a unique value ranging from 0 to ADD 31 if it is IPRTBIND(Man not datory) specified. None
None
MBFDLOCAL Multi hop BFD IP detect local ip
BSC6900
Local IP STR address for IP Fault IPCHK(Mandato multi-hop Detection ry) BFD GBFD-118609 Based on BFD
MBR
Multi-band report BSC6900
Used for requesting the MS to report the measurem ent information of neighborin g cells in multiple frequency bands. This parameter is carried Multi-band in the Sharing One system BSC SET information System GCELLCCBASI 2ter and GBFD-114401 Information C(Optional) 5ter. GBFD-111101 Sending
Filter Length for SDCCH MBSIGNLEN MEAN_BEP
BSC6900
For the purpose of accurately reflecting the radio environme nt of a network, filtering is performed on the measured values in several consecutiv e measurem ent reports. This parameter indicates the number of enhanced measurem ent reports received on a signaling channel used to SET measure Enhanced GCELLHOFITP the Measurement EN(Optional) MEAN_BE GBFD-117501 Report(EMR)
MBTRAFFLE Filter Length for N TCH MEAN_BEP BSC6900
For the purpose of accurately reflecting the radio environme nt of a network, filtering is performed on the measured values in several consecutiv e measurem ent reports. This parameter indicates the number of enhanced measurem ent reports received on a voice channel used to measure SET the Enhanced GCELLHOFITP MEAN_BE Measurement EN(Optional) P value. GBFD-117501 Report(EMR) Number of the BTS. The BTS is COL numbered SoftSYNCINFO(Man uniquely in Synchronized datory) a BSC. GBFD-118201 Network Name of the BTS. The BTS is COL named SoftSYNCINFO(Man uniquely in Synchronized datory) a BSC. GBFD-118201 Network
MBTSID
Second BTS Index
BSC6900
Second BTS MBTSNAME Name
BSC6900
MCC
MCC
BSC6900
ADD GCNOPERATO R(Mandatory) ADD GCELL(Mandato ry) ADD GEXT2GCELL( Mandatory) ADD GEXT3GCELL( Mandatory) SET FHO(Mandatory) ADD BTSAUTOPLAN (Mandatory) SET BTSAUTOPLAN CFG(Optional) ADD GCELLQUICKS ETUP(Mandator y)
Mobile country code. This parameter identifies the country where a mobile subscriber is located, for example, the Chinese MCC is Configuration 460. MRFD-210301 Management
MCC1
Cell MCC
BSC6900
Local mobile country code (MCC). It is used to identify the country that the mobile subscriber belongs to. For example, SET the MCC BTSAUTOPLAN of China is CFG(Optional) 460. GBFD-510702 Number of MC priorities. This parameter is valid ADD when the MPGRP(Optiona MP group l) type is MC. None
MCCLASS
MC PRI number
BSC6900
None
MCCLASS
MC PRI Number
BSC6900
ADD BTSMPGRP(Op tional) IMP BTSMPGRP(Op tional) ADD NCELL(Mandato ry) COL SYNCINFO(Man datory)
Number of MC prioritie Abis IP over levels. GBFD-118611 E1/T1 Number of the cell. The cell is numbered uniquely in Configuration a BSC. MRFD-210301 Management
MCELLID
Second Cell Index
BSC6900
MCELLNAM Second Cell E Name
BSC6900
ADD NCELL(Mandato ry) COL SYNCINFO(Man Name of datory) cell 2
MCN
Cabinet No. of Management Board
BSC6900
Cabinet No. of the manageme nt board. The manageme nt board refers to the TMU or RXU that directly communic ates with the board. The configurati on of this parameter must be consistent with the actual physical connection . Otherwise, the board may not work properly. GBFD-111202 O&M of BTS
MCPA MCPAOPTA Optimization LG Switch
BSC6900
If the MCPA Optimizatio n Switch is turned on, the MCPA priority SET update GCELLCHMGA mode is D(Optional) adjusted. Standard GBFD-111005
MCSTANDA GSM Multi Carrier RD BTS Standard BSC6900
for the SET GSM multiBTSPSUFP(Opti carrier onal) BTS GBFD-111202 O&M of BTS ADD ETHMD(Mandat ory) ADD Identifies a ETHMA(Mandat maintenan ory) ce domain None
MDIDX
MD INDEX
BSC6900
None
MDLEVEL
MD Level
BSC6900
Level of the maintenan ce domain.Th e priority of the maintenan ce domain ADD ranks from Ethernet OAM BTSETHMD(Opt 0 to 7 from GBFD-118630 Configuration ional) low to high. MRFD-210301 Management ADD ETHMD(Mandat ory) PING BTSCFM(Manda tory) TRC BTSCFM(Manda name of tory) the MD
MDName
MD NAME
BSC6900
MDNAME
MD Name
BSC6900
ADD BTSETHMD(Ma ndatory) ADD BTSETHMA(Ma ndatory) ADD BTSETHLCMEP (Mandatory) ADD BTSETHRMME P(Mandatory)
Name of the Ethernet OAM maintenan GBFD-118630 Configuration ce domain. MRFD-210301 Management
MEASORDE Allow MR R Command or not BSC6900
Whether to allow the MS to the send the PS measurem ent report SET to the GCELLPSI1(Opt network Packet System ional) side GBFD-119102 Information GSM and ADD Common UMTS Load GNRNC(Mandat measurem Balancing ory) ent period GBFD-511103 Based on Iur-g
MEASPERIO Measurement D Period
BSC6900
MEASURET Measurement YPE Report Type
BSC6900
Enhanced Measurement Report(EMR) Processing of Type of the Measurement measurem Report ent report Pre-processing SET (MR) GBFD-117501 of GCELLCCUTRA reported by GBFD-110801 Measurement NSYS(Optional) the MS GBFD-110802 Report
MEPID
MEP ID
BSC6900
Identifies a maintenan ce point in the maintenan ce alliance A maintenan ce point is ADD an edge ETHMEP(Mand node of the atory) MA. GBFD-118630 Ethernet OAM Identifies a maintenan ce end ADD point BTSETHLCMEP (MEP) of a (Mandatory) maintenan ADD ce Ethernet OAM BTSETHRMME association GBFD-118630 Configuration P(Mandatory) . MRFD-210301 Management The type of the maintenan ce point added to the maintenan ce group. LocalMep indicates a local maintenan ce point and RemoteMe p indicates ADD a remote ETHMEP(Mand maintenan atory) ce point. GBFD-118630 Ethernet OAM MP/MC ADD sequence MPGRP(Optiona header l) option ADD BTSMPGRP(Op tional) IMP BTSMPGRP(Op tional)
MEPID
MEP ID
BSC6900
MEPTYPE
MEP Type
BSC6900
MHF
MP/MC list head option
BSC6900
MHF
MP/MC List Head Option BSC6900
Frame encapsulat ion format supported Abis IP over by MP/MC. GBFD-118611 E1/T1
MINACCRXL Cell Reselection EV Level Threshold
BSC6900
Minimum receive level for a neighbor cell to become a candidate cell during cell reselection . When the receive level of the serving cell is lower than the value of this parameter, it indicates that the normal cell reselection level is bad. In this case, the parameter value is used for the calculation SET of the GCELLNC2PAR times of A(Optional) the GBFD-116201
MINBW
Min bandwidth [64kbps]
BSC6900
Minimum bandwidth for dynamic Abis IP over ADD adjustment E1/T1 IPLOGICPORT( at the GBFD-118611 A IP over Optional) logical port GBFD-118622 E1/T1
MINECNOTH Min Ec/No RES threshold
BSC6900
Selects 3G candidate cells. If the measured value of a 3G neighborin g cell is lower than this threshold, the 3G neighborin g cell will be removed from among the ADD 3G GEXT3GCELL( candidate GSM/WCDMA Optional) cells. GBFD-114301 Interoperability Minimum receive level offset. An MS can be handed over to a neighborin g cell only when the downlink level of the neighborin g cell is greater than the sum of "Min DL level on candidate Cell" and HUAWEI I ADD the value Handover G2GNCELL(Opti of this GBFD-110601 HUAWEI II onal) parameter. GBFD-510501 Handover
Min Access Level MINOFFSET Offset BSC6900
ANT_A ALD Current Minor MinorAlmThd Alarm Occur A Threshold
BSC6900
Threshold for triggering prompt alarm clearance when the ANT_A tributary antenna current is too heavy. When the actual current is higher than the configured value, the ALD Faulty Current Management Prompt Connection Alarm with TMA SET clearance (Tower BTSRXUBP(Opt is MRFD-210304 Mounted ional) triggered. MRFD-210601 Amplifier) Threshold for triggering prompt alarm clearance when the ANT_B tributary antenna current is too heavy. When the actual current is higher than the configured value, the ALD Faulty Current Management Prompt Connection Alarm with TMA SET clearance (Tower BTSRXUBP(Opt is MRFD-210304 Mounted ional) triggered. MRFD-210601 Amplifier)
ANT_B ALD Current Minor MinorAlmThd Alarm Occur B Threshold
BSC6900
Feed Tri. 0 TMA MINORALMU Over Warning P0 Alarm Threshold
BSC6900
Warning alarm threshold against excessive TMA feed current of feed tributary 0. When the actual current is greater than the specified Faulty value, a Management TMA feed Connection current with TMA SET warning (Tower BTSDATUBP(O alarm is MRFD-210304 Mounted ptional) generated. MRFD-210601 Amplifier) Warning alarm threshold against excessive TMA feed current of feed tributary 1. When the actual current is greater than the specified Faulty value, the Management TMA feed Connection current with TMA SET warning (Tower BTSDATUBP(O alarm is MRFD-210304 Mounted ptional) generated. MRFD-210601 Amplifier)
BSC6900
BSC6900
Warning alarm threshold against excessive TMA feed current of feed tributary 2. When the actual current is greater than the specified Faulty value, the Management TMA feed Connection current with TMA SET warning (Tower BTSDATUBP(O alarm is MRFD-210304 Mounted ptional) generated. MRFD-210601 Amplifier) Warning alarm threshold against excessive TMA feed current of feed tributary 3. When the actual current is greater than the specified Faulty value, the Management TMA feed Connection current with TMA SET warning (Tower BTSDATUBP(O alarm is MRFD-210304 Mounted ptional) generated. MRFD-210601 Amplifier)
BSC6900
BSC6900
Warning alarm threshold against excessive TMA feed current of feed tributary 4. When the actual current is greater than the specified Faulty value, the Management TMA feed Connection current with TMA SET warning (Tower BTSDATUBP(O alarm is MRFD-210304 Mounted ptional) generated. MRFD-210601 Amplifier) Warning alarm threshold against excessive TMA feed current of feed tributary 5. When the actual current is greater than the specified Faulty value, the Management TMA feed Connection current with TMA SET warning (Tower BTSDATUBP(O alarm is MRFD-210304 Mounted ptional) generated. MRFD-210601 Amplifier)
BSC6900
MinorClrThd A
ANT_A ALD Current Minor Alarm Clear Threshold
BSC6900
Threshold for triggering prompt alarm clearance when the ANT_A tributary antenna current is too heavy. When the actual current is lower than the configured value, the ALD Faulty Current Management Prompt Connection Alarm with TMA SET clearance (Tower BTSRXUBP(Opt is MRFD-210304 Mounted ional) triggered. MRFD-210601 Amplifier) Threshold for triggering prompt alarm clearance when the ANT_B tributary antenna current is too heavy. When the actual current is lower than the configured value, the ALD Faulty Current Management Prompt Connection Alarm with TMA SET clearance (Tower BTSRXUBP(Opt is MRFD-210304 Mounted ional) triggered. MRFD-210601 Amplifier)
MinorClrThd B
ANT_B ALD Current Minor Alarm Clear Threshold
BSC6900
Min Power Level MINPWRLEV For Directed DIRTRY Retry
BSC6900
In a direct retry, when the receive level of a neighborin g cell is no smaller than this parameter, the neighborin g cell can be a candidate cell for the direct retry. The parameter is invalid in SET handover GCELLHOCTRL algorithm (Optional) II. GBFD-110607 Direct Retry
MINRESTIM TCH Minimum ETCH Recovery Time
BSC6900
Minimum time required for a TCH to transform to a SDCCH and then SET transform GCELLCHMGB back to a ASIC(Optional) TCH
SDCCH Dynamic GBFD-113001 Adjustment
MINRSCPTH Min RSCP RES threshold
BSC6900
Selects 3G candidate cells. If the measured value of a 3G neighborin g cell is lower than this threshold, the 3G neighborin g cell will be removed from GSM/WCDMA among the Interoperability ADD 3G GSM/TDGEXT3GCELL( candidate GBFD-114301 SCDMA Optional) cells. GBFD-114302 Interoperability Minimum interval at which two BFD packets STR are IPCHK(Optional) received. Minimum interval at which the BTS ADD receives BTSBFD(Option BFD al) packets
MINRXINT
Min interval of BFD packet receive [ms]
BSC6900
None
None
MINRXINTE RVAL
Minimum RX Interval
BSC6900
IP Fault Detection GBFD-118609 Based on BFD
MINTXINT
Min interval of BFD packet send [ms] BSC6900
Minimum interval between STR sent BFD IPCHK(Optional) packets
MINTXINTER Minimum TX VAL Interval
BSC6900
Minimum interval at which the ADD BTS sends IP Fault BTSBFD(Option BFD Detection al) packets GBFD-118609 Based on BFD
MIRRORDP N
Mirror Dest Port No.
BSC6900
Mirror destination STR Ethernet IP Fault ETHMIRRORP port Detection ORT(Mandatory) number GBFD-118609 Based on BFD Mirror STR Ethernet ETHMIRRORP port ORT(Mandatory) number
Mirror Source MIRRORSPN Port No.
BSC6900
None
None
MIRRORTYP E Mirror Type
BSC6900
STR ETHMIRRORP ORT(Mandatory) Mirror type None ADD GCNOPERATO R(Mandatory) ADD GCELL(Mandato ry) ADD GEXT2GCELL( Mandatory) ADD GEXT3GCELL( Mandatory) SET FHO(Mandatory) ADD BTSAUTOPLAN (Mandatory) SET BTSAUTOPLAN CFG(Optional) ADD GCELLQUICKS ETUP(Mandator y)
None
MNC
MNC
BSC6900
Mobile network code. This parameter identifies the public land mobile network (PLMN) to which a mobile subscriber Configuration belongs. MRFD-210301 Management
MNC1
Cell MNC
BSC6900
Mobile network code (MNC). It is used to identify the PLMN that SET the mobile BTSAUTOPLAN subscriber CFG(Optional) belongs to. GBFD-510702
MOCACCES MOC Access SCPURATE CPU Rate
BSC6900
MODE
System clock working mode
BSC6900
Usage threshold of the CPU for calling access. If the usage of the CPU exceeds the threshold, the calling access request is transferred to other SET CPU for BSCFCPARA(O processing GSM Flow ptional) . GBFD-111705 Control Working mode of the system clock. Working modes of the system clock are as follows: (1) MANUAL: In this mode, you must specify a clock source and prevent the switching of the clock source. (2) AUTO: In this mode, you do not need to specify a clock source and the system SET automatica CLKMODE(Man lly selects BSC/RNC datory) the clock MRFD-210502 Clock
MODE
Signalling link mode
BSC6900
MODE
Configure Mode
BSC6900
SCTP link work mode. Server mode: BSC6900 starts the listening and waits for the peer to send the SCTP-INIT message. Client mode: BSC6900 actively ADD sends the A over IP SCTPLNK(Mand SCTP-INIT GBFD-118602 A IP over atory) message. GBFD-118622 E1/T1 SET QUICKCFG(Ma Configurati Configuration ndatory) on mode MRFD-210301 Management SWP MBSCMODE(M andatory) CHK Working MODEDATA(Ma mode after Configuration ndatory) switchover MRFD-210301 Management
MODE
Mode after Switchover
BSC6900
MODE
File Output Mode BSC6900
SET GCSFILE(Mand Mode of atory) file output. None
None
MODE
Backup mode
BSC6900
MODE
Check mode
BSC6900
Backup mode of the switch SET protection MSP(Optional) group None None Working mode of a port. When this parameter is set to CHECK_O N_STAND BY_PORT, the connectivit y check is performed on the standby port. When this parameter is set to CHECK_O N_INDEPE NDENT_P ORT, the connectivit y check is performed on the independe nt port. When this parameter is set to STR CHECK_O Board IPCHK(Optional) N_PRIMA GBFD-111701 Switchover
MODE0
Feed Tri. 0 Alarm Mode BSC6900
Alarm mode of feed tributary 0. There are three alarm modes. Alarm mode 1 has only one type of alarms. The alarm current is fixed and greater than the normal working current. Alarm mode 2 has two types of alarms: warning alarms and critical Faulty alarms. Management The alarm Connection current is with TMA SET fixed and (Tower BTSDATUBP(O greater MRFD-210304 Mounted ptional) than the MRFD-210601 Amplifier)
MODE1
MODE2
MODE3
MODE4
MODE5
MONITORPE RIOD Monitor Period
BSC6900
O&M of BTS Reporting the STR Temperature BTSRACKTEM List of the BTS PMON(Mandato Monitoring GBFD-111202 Equipment ry) period GBFD-111211 Room O&M of BTS Reporting the STR Temperature BTSRACKTEM List of the BTS PMON(Mandato Monitoring GBFD-111202 Equipment ry) duration GBFD-111211 Room SET BTSAUTODLDA CTINFO(Mandat ory) Month when the TMU board software is released GBFD-111202 O&M of BTS
MONITORTI ME Monitor Time
BSC6900
Month
Month
BSC6900
MOVESPEE Quick Move DTHRES Speed Threshold BSC6900
A quick handover can be initiated only if the rate of an MS is higher than this parameter during a SET certain GCELLHOFAST period of Fast Move (Optional) time. GBFD-510102 Handover When the number of error frames on the MP group reaches the value ADD of this BTSMPGRP(Op parameter, tional) the frame IMP error alarm BTSMPGRP(Op is Abis IP over tional) generated. GBFD-118611 E1/T1 When the number of error frames on the MP group decreases to the ADD value of BTSMPGRP(Op this tional) parameter, IMP the frame BTSMPGRP(Op error alarm Abis IP over tional) is cleared. GBFD-118611 E1/T1 ADD MPGRP(Mandat ory) ADD MPLNK(Mandat ory) ADD IPLOGICPORT( Optional)
MP Group Frame MPGRPEAA Error Alarm T Threshold BSC6900
MP Group Frame Error Alarm MPGRPEAD Clearance T Threshold BSC6900
MPGRPN
MP Group No.
BSC6900
MP group number MP group number
MPGRPN
MP Group No.
BSC6900
None
None
MPGRPN
MLPPP Group No.
BSC6900
ADD BTSMPGRP(Ma ndatory) ADD BTSMPLNK(Ma ndatory) IMP BTSMPGRP(Ma ndatory) IMP BTSMPLNK(Ma ndatory)
MPMODE
Multiplexing Mode BSC6900
ADD BTS(Optional)
Number of an MLPPP group on a BTS. It is unique in a BTS. The scope of the number of th MLPPP group in the BTS3900 series is Abis IP over 0~1. GBFD-118611 E1/T1 Timeslot multiplexin g mode at the Abis interface of the BTS. The BTS supports two multiplexin g modes: statistical multiplexin g on a 64 kbit/s timeslot and physical multiplexin g on a 16 kbit/s timeslot. The first mode is further classified into the following six types: 1:1, 2:1, 3:1, 4:1, 5:1, and LAPD 6:1. Multiplexing at GBFD-111301 Abis Interface
MPN
Connect Port No. BSC6900
Number of the serial port where the board is located. The manageme nt board refers to the TMU or RXU that directly communic ates with the board. The configurati on of this parameter must be consistent with the actual physical connection . Otherwise, the board may not work properly. GBFD-111202 O&M of BTS
MPSWITCH
MCPPP Switch
BSC6900
ADD BTSMPGRP(Op tional) IMP BTSMPGRP(Op Is Support Abis IP over tional) MCPPP. GBFD-118611 E1/T1 ADD MPGRP(Optiona l) MP type SET MPUBIND(Mand atory) ADD BRD(Mandatory) Abis IP over E1/T1 GBFD-118611 A IP over GBFD-118622 E1/T1
MPTYPE
MP type
BSC6900
MPUSLOT
MPU Slot No.
BSC6900
Number of the slot where the MPU subsystem Configuration is located MRFD-210301 Management
MPUSUBRA CK MPU Subrack No. BSC6900
MR. MRCOMPRE Compensation G Allowed
BSC6900
Number of the SET subrack MPUBIND(Mand where the atory) MPU ADD subsystem Configuration BRD(Mandatory) is located MRFD-210301 Management Whether power control algorithm II allows measurem ent report compensat ion. When making a power control decision, the BSC retrieves a certain number of history measurem ent reports and performs weighted filtering on the receive level values and receive quality values in SET these Enhanced GCELLPWR2(O reports, Power Control ptional) which may GBFD-110703 Algorithm
MRMISSCO UNT
Allowed MR Number Lost
BSC6900
If the number of measurem ent reports lost consecutiv ely is no larger than this value, linear interpolatio n is performed for the values in the lost measurem ent reports based on the values in the two measurem ent reports preceding and following the lost measurem ent reports. Otherwise, the lost HUAWEI I SET measurem Handover GCELLHOFITP ent reports GBFD-110601 HUAWEI II EN(Optional) will be GBFD-510501 Handover When the number of the lost measurem ent reports exceeds this parameter during a power control period, the SET power HUAWEI III GCELLPWR3(O control Power Control ptional) stops. GBFD-117601 Algorithm
MRMISSNU M
MRMissNumber
BSC6900
MRPREPRO Sent Freq.of CFREQ preprocessed MR BSC6900
Frequency at which the BTSs submit preprocessed SET measurem GCELLHOCTRL ent reports (Optional) to the BSC GBFD-110802
MRRUATTE Antenna Tributary NFACTOR1 1 Factor BSC6900
Attenuatio n factor for SET the TMA of BTSRXUBP(Opt antenna ional) tributary 1 GBFD-111202 O&M of BTS Attenuatio n factor for SET the TMA of BTSRXUBP(Opt antenna ional) tributary 2 GBFD-111202 O&M of BTS
MRRUATTE Antenna Tributary NFACTOR2 2 Factor BSC6900
MRSCOPES MR Collection WITCH Scope Switch
BSC6900
Switch of measurem ent report collection within a specified scope. If the specified scope is a site, the switch applies to all the cells at the site; if the specified scope is a cell, the switch applies to the cell only. The switch of measurem ent report collection within a specified scope last SET configured GMRSCOPE(M takes andatory) effect. GBFD-111203 O&M of BSC
MR Collection MRSWITCH Control Switch
BSC6900
The control switch of measurem ent report collection includes OFF (do not collect), ON_WITH _SDCCH (collect measurem ent reports for SDCCHs and TCHs), and ON_WITH OUT_SDC CH (collect measurem SET ent reports GMRCTRL(Man for TCHs datory) only). GBFD-111203 O&M of BSC ADD BTSPPPLNK(O ptional) ADD BTSMPLNK(Opt ional) IMP BTSPPPLNK(O ptional) IMP BTSMPLNK(Opt ional) Maximum length of a received packet. The value of this parameter is negotiated at both ends of a communic ation. GBFD-118601 Abis over IP
MRU
Max Receive Unit BSC6900
MS
Number of MSs
BSC6900
Number of MSs used when the ADD offset SoftAISSCFG(Optio information Synchronized nal) is collected GBFD-118201 Network
MSCAPABLE STATSWITC MS Capability H Statistic Switch
BSC6900
Whether to collect the information about the MSs of different capabilities in a cell. This parameter SET has no GCELLSOFT(O impact on ptional) services. GBFD-110501 Call Control Available capacity of the MSC. This parameter is valid only when the MSC pool function is enabled. It is set according to the ADD actual GCNNODE(Opti capacity of onal) the MSC. GBFD-117401 MSC Pool Number of bits occupied by the Network Resource Identifier in the TMSI. NRI specifies a ADD CN node in GCNOPERATO the MSC R(Mandatory) pool. GBFD-117401 MSC Pool
MSCCAP
MSC Available Capability<K User number> BSC6900
Length of NRI in MSCNRILEN TMSI
BSC6900
MSCNULLN RI
MSC NULL-NRI Value
BSC6900
Special NRI(Netwo rk Resource Identifier) that is coded together with common NRIs. This parameter is used to indicate that the BSC routes the service initiated by the MS to the MSC in ADD non GCNOPERATO OFFLOAD R(Optional) state. GBFD-117401 MSC Pool
MSCPOOLA MSC Pool LLOW Function Enabled BSC6900
Whether to enable the MSC pool function on the BSC6900. The MSC pool function enables up to 32 MSCs to provide services for mobile subscriber s in a BSC6900. With the MSC pool function, one BSC6900 can be connected to multiple MSCs and the services in the BSC6900 ADD are shared GCNOPERATO to each R(Optional) MSC in all GBFD-117401 MSC Pool
MSC MSCSTATU Administrable E State
BSC6900
Administrat ive state of the MSC. This parameter is valid only when the MSC pool function is enabled. It is set according to the actual operating state of the MSC. A call accesses the MSC only when this ADD parameter GCNNODE(Opti is set to onal) NORMAL. GBFD-117401 MSC Pool
MSCVER
MSC Version Indication
BSC6900
Protocol version of the MSC that is connected to the BSC6900. The supported signaling varies with SET the A Interface GCELLCCUTRA protocol Protocol NSYS(Optional) versions. GBFD-111804 Process
MSIPFAILIN DDELAY TREESTABLISH BSC6900
SET Call Call GCELLTMR(Opt reestablish Reestablishme ional) ment timer GBFD-110503 nt CHK INNSPCH(Mand atory) STR CALLRESLOP( Mandatory) ADD GCSCHRUSER( MSISDN Mandatory) value
MSISDN
MSISDN
BSC6900
MSISDNPRE FIX1 MSISDN prefix 1 BSC6900
MSISDN prefix 1. When matching the call specified by the mobile number, the BSC6900 adds the MSISDN prefix 1 according to the value of this parameter. For example, when the value of this parameter is 123 and the mobile number to be matched is 456, the BSC Local SET call Switch BSCBASIC(Opti matching GBFD-117701 BTS Local onal) is GBFD-117702 Switch
MsisdnPrfxLi st2StartBscL Prefix Number for s1 BSC 1 BSC6900
If "Options for BSC Local Switch" is set to PREFIXN UMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the SET first three BSSLS(Optional digits in BSC Local ) the GBFD-117701 Switch
MsisdnPrfxLi st2StartBtsLs Prefix Number for 1 BTS 1 BSC6900
If "Options for BSC Local Switch" is set to PREFIXN UMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the SET first three BSSLS(Optional digits in BTS Local ) the GBFD-117702 Switch
If "Options for BSC Local Switch" is set to PREFIXN UMBER, and the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local switching function is enabled. For example, if two numbers 135 and 139 are set in the list, and the SET first three BSSLS(Optional digits in BTS Local ) the GBFD-117702 Switch If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local SET switching BSSLS(Optional function is BSC Local ) disabled. GBFD-117701 Switch
MsisdnSegLi st2AvoidBscL Avoid Number for s1 BSC 1 BSC6900
If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local SET switching BSSLS(Optional function is BSC Local ) disabled. GBFD-117701 Switch If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local SET switching BSSLS(Optional function is BSC Local ) disabled. GBFD-117701 Switch If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BSC local SET switching BSSLS(Optional function is BSC Local ) disabled. GBFD-117701 Switch
MsisdnSegLi st2AvoidBtsL Avoid Number for s1 BTS 1 BSC6900
If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BTS local SET switching BSSLS(Optional function is BTS Local ) disabled. GBFD-117702 Switch If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BTS local SET switching BSSLS(Optional function is BTS Local ) disabled. GBFD-117702 Switch If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BTS local SET switching BSSLS(Optional function is BTS Local ) disabled. GBFD-117702 Switch
If the first digits in the MSISDN of the called or calling are the same as the value of this parameter, the BTS local SET switching BSSLS(Optional function is BTS Local ) disabled. GBFD-117702 Switch Whether to enable "Triggering the quick PBGT algorithm only when SET an MS is GCELLHOFAST far from Fast Move (Optional) the BTS" GBFD-510102 Handover
MSLEVSTR QPBGT
EN Quick PBGT HO ALG When MS Leaves BTS
BSC6900
MSMAXRET RAN MS MAX Retrans BSC6900
Maximum number of Channel Request messages that can be sent by an MS in an immediate assignmen t procedure. After the MS initiates the immediate assignmen t procedure, it always listens to the messages on the BCCH and all the common control channels (CCCHs) SET in the GCELLCCBASI CCCH C(Optional) group to
Radio Common Channel Management Location Updating Paging Assignment and Immediate Assignment
MSPCMD
MSP Control Command
BSC6900
Control command of the MSP SET switchover MSPCMD(Mand protection Board atory) group GBFD-111701 Switchover
MSRDMCSL MSRD MCS EV Threshold
BSC6900
MSRD PDCH MSRDPDCH Multiplex LEV Threshold
BSC6900
Threshold of the MS Receiver SET Diversity GCELLPSCHM( (MSRD) Optional) mode GBFD-510801 MSRD PDCH Downlink multiplex threshold in the Mobile Station Receiver Diversity (MSRD) mode. When this parameter is set to "80", the MS does not adopt the MSRD mode. When the number of the TBF on the PDCH that is assigned to the MS exceeds this parameter or the coding rate SET of the GCELLPSCHM( PDCH is Optional) smaller GBFD-510801 MSRD
MSRN
Subrack No. of Management Board
BSC6900
Number of the subrack where the board is located. The manageme nt board refers to the TMU or RXU that directly communic ates with the board. The configurati on of this parameter must be consistent with the actual physical connection . Otherwise, the board may not work properly. GBFD-111202 O&M of BTS
MSRXMIN
Min DL level on candidate Cell
BSC6900
The M criteria supports setting minimum values for the downlink receive level of neighborin g cells. The M criteria is met only when , Estimated downlink level of neighborin g cells >= ("Min DL level on candidate Cell" + "Min Access Level Offset") Estimated uplink level HUAWEI I ADD of Handover GEXT2GCELL( neighborin GBFD-110601 HUAWEI II Optional) g cells >= GBFD-510501 Handover
MS Rx Quality MSRXQUAL Statistic STATTHRSH Threshold
BSC6900
When the number of received measurem ent reports on the downlink transmissi on quality (Packet Downlink Ack/Nack message) is greater than or equal to this threshold, emergency SET reselection GCELLNC2PAR decision is A(Optional) made. GBFD-116201
MSTF
MS Flow Control Timer
BSC6900
Duration of the flow control timer F of the MS. The MS sends the flow control message SET according BSSGPPARA(O to this Gb Interface ptional) duration. GBFD-119001 Function
MSTSERVA Master Service CTDELAY Active Delay
BSC6900
If no handshake message is received from the peer within the delay, the master service is activated. A master service object provides services at the local BSC and its configurati on data is backed up at the peer BSC. A master service object provides services at the peer BSC only when the SET local BSC GBSCREDGRP( is faulty or BSC Node Optional) when all GBFD-113725 Redundancy Maximum TX power SET for the MS GCELLSERVPA to access RA(Optional) the PCH GBFD-114101 GPRS Switch for the selfhealing of the OMU when the OMU SET process SLFSLVSW(Opt memory is ional) overloaded None
Maximum TX MSTXPWRM Power for Access AX PCH BSC6900
MSW
Self-healing Switch for Memory Overload BSC6900
None
MTCACCES MTC Access SCPURATE CPU Rate
BSC6900
Usage threshold of the CPU for called access. If the usage of the CPU exceeds the threshold, the called access request is transferred to other SET CPU for BSCFCPARA(O processing GSM Flow ptional) . GBFD-111705 Control CHK E1T1CRS(Mand Detection atory) method
MTHD
Method
BSC6900
None
None
MTP2LNKN
MTP2 link No.
BSC6900
ADD A Interface MTP3LNK(Mand Identify an Protocol atory) MTP2 link GBFD-111804 Process Metric system. The values of this parameter include ADD "MET" and GPS(Optional) "IMP". None None ADD Maximum SCTPLNK(Optio transport nal) unit GBFD-118602 A over IP
MTRLGY
Metrology
BSC6900
MTU
MTU value
BSC6900
MTU
MTU[Byte]
BSC6900
Abis IP over SET Maximum E1/T1 ETHPORT(Opti transmissi GBFD-118611 A IP over onal) on unit GBFD-118622 E1/T1
MTU
MTU
BSC6900
Maximum size of a packet that can be transmitted SET or received BTSETHPORT( on a FE Abis IP over Optional) port. GBFD-118611 E1/T1
MTVT
Hierarchical Power Supply Para.<0.1v>
BSC6900
Bus voltage of SET the battery BTSBAT(Option rack of the al) BTS GBFD-111202 O&M of BTS
MULTIBAND Multi-Band REP Report
BSC6900
Multi-band point report value, including "report six cells with the strongest signal at each frequency point", "report one cell with the strongest signal at each frequency point","rep ort two cells with the strongest signal at each frequency point", and "report three cells with the SET strongest GCELLSERVPA signal at RA(Optional) each GBFD-114101 GPRS
MUTECHEC KCLASS1PE Period of Mute RIOD Detect Class1
BSC6900
Period of performing class-1 mute detection. If the bad frame rate reaches "Bad Frame Threshold of Mute Detection Class 1" within the period specified by this parameter, mute speech may be detected. The setting of "Mute Detection Class 2 Switch" determines whether to perform SET the class-2 GCELLSOFT(O mute ptional) detection. GBFD-111203 O&M of BSC Whether the oneway audio problem is checked in class-2 detection. In this manner, the oneway audio problems found in class-1 are SET checked to GCELLSOFT(O ensure the ptional) accuracy. GBFD-111203 O&M of BSC
MUTECHEC KCLASS2S Mute Detect WITCH Class2 Switch
BSC6900
MUTECHEC Period of Mute KPEIROD Detect Class2
BSC6900
Period of performing the class-2 mute detection. After the BTS or TC initiates a class-2 mute detection request, the class-2 mute detection fails if there is no response and no test TRAU frame is received by the end of the period specified by this parameter; if the class2 mute detection SET response GCELLSOFT(O is received ptional) but no GBFD-111203 O&M of BSC
MUTEFORBI Access Prohibited TCALLTMIN Upon One-Way TVAL Audio BSC6900
Time for prohibiting the call from accessing the correspond ing channel where oneway audio SET is detected GCELLSOFT(O on the Abis ptional) interface. GBFD-111203 O&M of BSC
MUTERELC ALLEN
Forced Call Release Upon Failed Handover in One-Way Audio
BSC6900
Whether to forcibly release a call after the forced handover fails in the case of one-way SET audio on GCELLSOFT(O the Abis ptional) interface GBFD-111203 O&M of BSC
MUXTIME
PPP mux framing out-time[us] BSC6900
Maximum time Abis IP over ADD waiting for E1/T1 PPPLNK(Option multiplexin GBFD-118611 A IP over al) g GBFD-118622 E1/T1
MUXTIME
PPP mux framing out-time[us] BSC6900
Frame timeout duration of ADD the PPP MPGRP(Optiona multiplexin l) g group None
None
MUXTYPE
IP MUX Type
BSC6900
Abis MUX ADD IP packet UDP MUX for IPMUX(Mandato multiplexin GBFD-118604 A ry) g type GBFD-118610 Transmission Minimum number of reserved working SET status BTSCABPARA( TRXs of Optional) the cabinet GBFD-111202 O&M of BTS Abis MUX BFD local UDP MUX for STR description GBFD-118604 A IPCHK(Optional) mark GBFD-118610 Transmission
MWTRXNO
Min Quantity of Working TRXs
BSC6900
MYDISCRIMI My discriminator NATOR of BFD
BSC6900
N200
N200
BSC6900
System parameter in the LAPD protocol. The value of this parameter specifies the maximum number of times when SET a frame is BTSRINGATTR( retransmitt Optional) ed. GBFD-117801 Ring Topology
N200ESTAB N200 of Establish BSC6900
Error control is performed on the I frame sent over the LAPDm layer between the BTS and MS. If the MS detects errors in an I frame, the BTS should resend the I frame. This parameter indicates the maximum number of retransmis sions of the I frame. For the function of SET N200 and GCELLCCTMR( the effect Radio Link Optional) of the GBFD-111002 Management
N200FFULL
N200 of FACCH/Full Rate BSC6900
Error control is performed on the I frame sent over the LAPDm layer between the BTS and MS. If the MS detects errors in an I frame, the BTS should resend the I frame. This parameter indicates the maximum number of retransmis sions of the I frame on the FACCH (a full-rate SET channel). GCELLCCTMR( For the Radio Link Optional) function of GBFD-111002 Management
N200 of N200FHALF FACCH/Half Rate BSC6900
Error control is performed on the I frame sent over the LAPDm layer between the BTS and MS. If the MS detects errors in an I frame, the BTS should resend the I frame. This parameter indicates the maximum number of retransmis sions of the I frame on the FACCH (a half-rate SET channel). GCELLCCTMR( For the Radio Link Optional) function of GBFD-111002 Management
N200PARAS Use LAPDm WITCH N200
BSC6900
Whether the BSC6900 sends the LAPDm N200 parameter to the BTS. If this parameter is set to YES, the BSC sends the LAPDm N200 parameter. If this parameter is set to NO, the BSC6900 does not send the SET LAPDm GCELLCCTMR( N200 Radio Link Optional) parameter. GBFD-111002 Management
N200REL
N200 of Release BSC6900
Error control is performed on the I frame sent over the LAPDm layer between the BTS and MS. If the MS detects errors in an I frame, the BTS should resend the I frame. This parameter indicates the maximum number of retransmis sions of the I frame during the multi-frame release. SET For the GCELLCCTMR( function of Radio Link Optional) N200 and GBFD-111002 Management
N200SACCH N200 of SACCH
BSC6900
Error control is performed on the I frame sent over the LAPDm layer between the BTS and MS. If the MS detects errors in an I frame, the BTS should resend the I frame. This parameter indicates the maximum number of retransmis sions of the I frame on the SACCH. For the SET function of GCELLCCTMR( N200 and Radio Link Optional) the effect GBFD-111002 Management
N200SDCCH N200 of SDCCH
BSC6900
Error control is performed on the I frame sent over the LAPDm layer between the BTS and MS. If the MS detects errors in an I frame, the BTS should resend the I frame. This parameter indicates the maximum number of retransmis sions of the I frame on the SDCCH. For the SET function of GCELLCCTMR( N200 and Radio Link Optional) the effect GBFD-111002 Management
N3101
Maximum Value of N3101
BSC6900
Maximum value of the N3101 counter. In the dynamic uplink allocation mode, the network side enables multiple MSs to share the same uplink channel through the USF value in the downlink data block. After the network side allocates the USF to the uplink TBF (the SET uplink TBF GCELLSTANDA is set up RDOPTPARA(O successfull ptional) y), N3101 GBFD-114101 GPRS
N3103
BSC6900
Maximum value of the N3101 counter. When the uplink transmissi on ends, if the network side receives the last RLC data block, the network side sends an FAI=1 uplink packet acknowled ged/unack nowledged message and starts N3103. If the packet control acknowled gement SET message GCELLSTANDA is not RDOPTPARA(O received in ptional) the GBFD-114101 GPRS
N3105
BSC6900
Maximum value of the N3105 counter. After the downlink TBF is set up successfull y, the N3105 is started on the network side. After the downlink RLC data block is added with the RRBP domain on the network side, the valid packet acknowled ged message GPRS SET responded Dynamically GCELLSTANDA by the MS Adjusting the RDOPTPARA(O is received GBFD-114101 RRBP ptional) in the GBFD-119205 Frequency Counter on the DTE side. After BC link integrity is verified according to "Parameter of DTE [N391]", the global state query request is originated on the DTE side. GBFD-510002 Gb Over FR
N391
Parameter of DTE [N391]
BSC6900
ADD BC(Optional)
N392
BSC6900
ADD BC(Optional)
Counter on the DTE side, recording the checking times "Parameter of DTE [N393]". After BC link integrity is verified according to "Parameter of DTE [N392]", the BC link state is restored. That is: if the BC link state on the DTE side is failure, and the system is found normal in the checking times GBFD-510002 Gb Over FR
N393
BSC6900
ADD BC(Optional)
Counter on the DTE side, recording the checking times "Parameter of DTE [N393]". After BC link integrity is verified according to "Parameter of DTE [N392]", the BC link state is restored. That is: if the BC link state on the DTE side is failure, and the system is found normal in the checking times GBFD-510002 Gb Over FR
NACCSPT
Support NACC
BSC6900
NAME
OSP name
BSC6900
NAME
DSP name Signalling Route name
BSC6900
NAME
BSC6900
Whether to support the network assisted cell change (NACC). The NACC is used in the network control modes NC0, NC1 or NC2. The NACC enables the network to notify the MS of the system information of the neighborin g cell when the MS is in the packet transmissi Network on state. In Assisted Cell SET this way, Change GCELLGPRS(O the MS GBFD-116301 (NACC) ptional) can GBFD-119502 PS Handover ADD A Interface OPC(Mandatory Name of Protocol ) the OSP GBFD-111804 Process ADD A Interface N7DPC(Mandat Name of Protocol ory) the DSP GBFD-111804 Process ADD Name of A Interface MTP3RT(Manda an MTP3 Protocol tory) route GBFD-111804 Process ADD MTP3LKS(Mand atory) ADD MTP3LNK(Mand atory) Name of the signalling link set Name of the MTP3 link A Interface Protocol GBFD-111804 Process A Interface Protocol GBFD-111804 Process
NAME
Signalling link set name BSC6900 Signalling link name
NAME
BSC6900
NAME
Adjacent Node Name
BSC6900
Name of ADD the ADJNODE(Man adjacent datory) node
GBFD-118605 IP QOS
NAME
Local entity name BSC6900
Local entity name. The ADD local entity M3LE(Mandator name must y) be unique. GBFD-118602 A over IP Name of ADD the M3DE(Mandator destination y) entity GBFD-118602 A over IP The M3UA route names and the M3UA routes are in the oneADD to-one M3RT(Mandator matching y) relation. GBFD-118602 A over IP Name of the M3UA link set. The name of the M3UA signalling ADD link set M3LKS(Mandato must be ry) unique. GBFD-118602 A over IP M3UA signaling link name. The M3UA link names and the M3UA links are in the one-toADD one M3LNK(Mandat matching ory) relation. GBFD-118602 A over IP ADD Name of PCU(Mandatory) the PCU
NAME
Destination entity name BSC6900
NAME
M3UA route name
BSC6900
NAME
M3UA Signalling link set name BSC6900
NAME
M3UA Signaling link name
BSC6900
NAME
PCU Name
BSC6900
GBFD-114101 GPRS
NAMRLFRM Assign Non-AMR TRXALLOW User Loose Fre. ED Reuse TRX BSC6900
Whether to preferential ly allocate loose multiplexin g SET frequencie GCELLCHMGA s to nonD(Optional) AMR users GBFD-111005
NAVGI
N_AVG_I
BSC6900
NBAMRTFO SWITCH TFO Switch
BSC6900
Filter consistent of the collision signal strength of power control. When sampling must be performed (NAVGI) times before the MS obtains the SET efficient GCELLPSPWP measurem ARA(Optional) ent signal. Whether to enable the Tandem Free Operation (TFO) function on the BTS through a CHANNEL ACTIVATI ON or MODE MODIFY message. This parameter specifies whether to enable the Tandem Free Operation (TFO) function. If the voice quality of an ongoing MS-to-MS call is bad, the TFO SET function GCELLBASICP can be ARA(Optional) enabled to
GBFD-119115 Power Control
GBFD-115501 GBFD-115502 GBFD-115701 GBFD-113301 GBFD-113726
AMR FR AMR HR TFO Enhanced Full Rate TC Pool
NBR2GNCEL Neighbor 2G Cell L1ID 1 Index BSC6900
Uniform number of neighborin g cell 1 index within a BSC6900, which uniquely identifies a cell and is ADD in the GIBCAPNCGRP range 0 to Configuration (Mandatory) 5047. MRFD-210301 Management Name of ADD neighborin GIBCAPNCGRP g GSM cell (Mandatory) 1 GBFD-117002 IBCA (Interference Based Channel Allocation)
NBR2GNCEL Neighbor 2G Cell L1NAME 1 Name BSC6900
NBR2GNCEL Neighbor 2G Cell L2ID 2 Index BSC6900
Index of neighborin g GSM cell 2. Uniform number of a cell index within a BSC6900, which uniquely identifies a cell and is ADD in the GIBCAPNCGRP range 0 to Configuration (Mandatory) 5047. MRFD-210301 Management Name of ADD neighborin GIBCAPNCGRP g GSM cell (Mandatory) 2 GBFD-117002 Uniform number of a cell index within a BSC6900 , which ADD uniquely G2GNCELL(Ma identifies a ndatory) cell. MRFD-210301 ADD G2GNCELL(Ma Name of a ndatory) cell MRFD-210301 IBCA (Interference Based Channel Allocation)
NBR2GNCEL Neighbor 2G Cell L2NAME 2 Name BSC6900
NBR2GNCEL Neighbor 2G Cell LID Index BSC6900 NBR2GNCEL Neighbor 2G Cell LNAME Name BSC6900
NBR3GNCEL Neighbor Cell LID Index NBR3GNCEL Neighbor Cell LNAME Name
BSC6900
BSC6900
Uniform number of a neighborin g cell index within a BSC, which uniquely identifies a cell. The value range of the index of a 3G ADD external G3GNCELL(Ma cell is 5048 Configuration ndatory) to 8047. MRFD-210301 Management ADD Name of a G3GNCELL(Ma neighborin Configuration ndatory) g cell MRFD-210301 Management When this switch is on, it indicates that the data of the adjacent cell is generated automatica lly. When this switch is off, it indicates that these data must PICO SET be Automatic BTSAUTOPLAN configured GBFD-510704 Configuration CFG(Optional) manually. GBFD-510601 and Planning ADD Cell ID of a G2GNCELL(Ma neighborin Configuration ndatory) g cell MRFD-210301 Management Local Area Code ADD (LAC) of a G2GNCELL(Ma neighborin Configuration ndatory) g cell MRFD-210301 Management
NBRCELLS WITCH
Neighbor Cell Plan Switch
BSC6900
NBRCI
Neighbour Cell CI BSC6900
NBRLAC
Neighbour Cell LAC
BSC6900
NBRMCC
Neighbour Cell MCC
BSC6900
Mobile Country Code ADD (MCC) of a G2GNCELL(Ma neighborin Configuration ndatory) g cell MRFD-210301 Management Mobile Network Code ADD (MNC) of a G2GNCELL(Ma neighborin Configuration ndatory) g cell MRFD-210301 Management Whether the PCU of the cell supports the 64 neighborin g cells. This parameter determines the capability of reporting the number Networkof the Controlled Cell neighborin Reselection g cells of (NC2) the BSC in Network SET the NACC Assisted Cell GCELLGPRS(O and NC2 GBFD-116201 Change ptional) function. GBFD-116301 (NACC)
NBRMNC
Neighbour Cell MNC
BSC6900
NBRSPT64
Support 64 Neighbour Cells
BSC6900
NC2 Load NC2LoadRes Reselection el Switch
BSC6900
Whether to involve the load of the target cell in the algorithm for NC2 cell reselection . If this parameter is set to Support, the load of the target cell is involved in the algorithm for NC2 SET cell BSCPSSOFTPA reselection RA(Optional) . GBFD-116201
NC2SPT
Support NC2
BSC6900
Whether to support the network control 2 (NC2). The NC2 enables the network side to control the cell reselection for the MS when the MS reports the measurem ent report of the local cell and the neighborin g cell.When this parameter is set to "YES" and "Network NetworkControl Controlled Cell SET Mode" in Reselection GCELLGPRS(O "SET GBFD-116201 (NC2) ptional) GCELLPS GBFD-119502 PS Handover Network color code that is provided by the telecom operator. The NCC is used to identify networks from area to area. The NCC ADD is unique GCELL(Optional nationwide. ) The BCC ADD and the GEXT2GCELL( NCC form Configuration Mandatory) the BSIC. MRFD-210301 Management
NCC
NCC
BSC6900
NCC
NCC
BSC6900
NCCPERMIT NCC Permitted
BSC6900
Network color code. It is used to uniquely identify different public land mobile network (PLMN) of ADD the GCELLQUICKS adjacent ETUP(Optional) country. A set of NCCs of the cells to be measured by the MS. This parameter is an information element (IE) in the system information type 2 and 6 messages. If a bit of the value of this parameter is set to 1, the MS reports the correspond ing measurem ent report to the BTS. The value of this SET parameter GCELLIDLEBA has a byte SIC(Optional) (eight bits).
Basic Cell Selection Basic Cell Reselection GBFD-110401 System GBFD-110402 Information GBFD-111101 Sending
NCCPERMIT ED NCC Permitted
BSC6900
NCC bitmap of the measurem ent report sent by the MS. The MS reports only the NCC bitmap of the BSIC and the Processing of cell Measurement measurem Report ent report Pre-processing SET that of GCELLEXTMSR matches GBFD-110801 Measurement PARA(Optional) the bitmap. GBFD-110802 Report
Neighbor Cell NCELLFILTE Filter Length MR R Number
BSC6900
For the purpose of accurately reflecting the radio environme nt of a network, filtering is performed on the measured values in several consecutiv e measurem ent reports. This parameter indicates the number of measurem ent reports used for the filtering of neighborin SET g cell GCELLHOFAST information Fast Move (Optional) . GBFD-510102 Handover
NCELLFLTL Filter Length for EN Ncell RX_LEV
BSC6900
For the purpose of accurately reflecting the radio environme nt of a network, filtering is performed on the measured values in several consecutiv e measurem ent reports. This parameter indicates the number of measurem ent reports used for the filtering of neighborin HUAWEI I SET g cell Handover GCELLHOFITP signal GBFD-110601 HUAWEI II EN(Optional) strength. GBFD-510501 Handover Neighborin g cell interferenc e level threshold 0 GBFD-510901 2G/3G Neighboring Cell Automatic Optimization
NeighborCell NcellInterFLe Interfere Level velThres0 Thresh 0
BSC6900
BSC6900
Neighborin g cell interferenc e level threshold 1 GBFD-510901
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
Neighborin g cell interferenc e level threshold 6 GBFD-510901 Neighborin g cell interferenc e level threshold 7 GBFD-510901
2G/3G Neighboring Cell Automatic Optimization 2G/3G Neighboring Cell Automatic Optimization
BSC6900
NCHOCBLO NCH Occupy CKNUM Block Number
BSC6900
Number of blocks Public Voice occupied Group Call by the Service SET NCH in the Public Voice GCELLGSMR(O group call GBFD-510301 Broadcast ptional) service GBFD-510302 Service Number of the start block Public Voice occupied Group Call by the Service SET NCH in the Public Voice GCELLGSMR(O group call GBFD-510301 Broadcast ptional) service GBFD-510302 Service
NCHSTARTB LOCK NCH Start Block
BSC6900
NCO
Network Control Mode
BSC6900
Network control mode for cell reselection of the MS. There are three modes. NC0: normal MS control. The MS shall perform autonomou s cell reselection. NC1: MS control with measurem ent reports. The MS shall send measurem ent reports to the network and the MS shall perform SET autonomou GCELLPSBASE s cell re(Optional) selection.
Networking Control Mode GSM/TDSCDMA Interoperability PS Handover System Information Sending
NEIGHBOR
Adjacent flag
BSC6900
NETMASK
Net Mask
BSC6900
The DSP and OSP are in the associated mode or ADD non A Interface N7DPC(Optional associated Protocol ) mode. GBFD-111804 Process ADD IP address XPUVLAN(Mand mask of Configuration atory) the VLAN MRFD-210301 Management
NEWURGHO Min Interval for MININTV Emerg. HO Forward Route Address
BSC6900
NEXTHOP
BSC6900
Minimum interval between two consecutiv e emergency handovers performed by an MS. During this interval, no HUAWEI I SET emergency Handover GCELLHOCTRL handover GBFD-110601 HUAWEI II (Optional) is allowed. GBFD-510501 Handover ADD IP address OMUIPRT(Mand of the next atory) hop None None ADD IPRT(Mandatory ) Next hop ADD IPRTBIND(Man datory) Next hop
NEXTHOP
Forward route address
BSC6900
None
None
NEXTHOP
Forward route address
BSC6900
None
None
NEXTHOP
Forward Route Address
BSC6900
ADD BTSIPRT(Mand atory) ADD BTSIPRTBIND( Mandatory) IMP IP address BTSIPRT(Mand of the next Abis IP over atory) hop GBFD-118611 E1/T1 ADD A Interface OPC(Mandatory Protocol ) Network ID GBFD-111804 Process Name of the file to be downloade d. The file name must be complete DLD and does BSC/RNC TCFILE(Mandat not contain Software ory) a wildcard. MRFD-210401 Management
NI
Network ID
BSC6900
NM
Download file name
BSC6900
NMO
Network Operation Mode
BSC6900
This parameter is related to the paging channel of the system. There are three network operation modes: network operation mode I, network operation mode II, and network operation mode III. Network operation mode I is used when the system is configured with the Gs Network SET interface. Operation GCELLPSBASE Network GBFD-119108 Mode Support (Optional) operation GBFD-114151 DTM No Mains Supply SET Alarm BTSALMPORT( Cabinet Mandatory) No.
NMSACN
No Mains Supply Alarm Cabinet No. BSC6900
NMSAPN
No Mains Supply Alarm Port No. BSC6900
No Mains SET Supply BTSALMPORT( Alarm Port Mandatory) No. GBFD-111202 O&M of BTS No Mains SET Supply BTSALMPORT( Alarm Slot Mandatory) No. GBFD-111202 O&M of BTS No Mains Supply SET Alarm BTSALMPORT( Subrack Mandatory) No.
NMSASN
No Mains Supply Alarm Slot No. BSC6900
NMSASRN
No Mains Supply Alarm Subrack No. BSC6900
Lower limit of NO1M48ALM No.1 input -48V[THDDOWN V] Upper limit of NO1M48ALM No.1 input -48V[THDUP V] Lower limit of NO2M48ALM No.2 input -48V[THDDOWN V] Upper limit of NO2M48ALM No.2 input -48V[THDUP V] Lower limit of NO3M48ALM No.3 input -48V[THDDOWN V] Upper limit of NO3M48ALM No.3 input -48V[THDUP V] Lower limit of NO4M48ALM No.4 input -48V[THDDOWN V] Upper limit of NO4M48ALM No.4 input -48V[THDUP V] Lower limit of NO5M48ALM No.5 input -48V[THDDOWN V] Upper limit of NO5M48ALM No.5 input -48V[THDUP V] Lower limit of NO6M48ALM No.6 input -48V[THDDOWN V] Upper limit of NO6M48ALM No.6 input -48V[THDUP V]
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal) SET PWRPARA(Opti onal)
Lower limit of input voltage 1 Upper limit of input voltage 1 Lower limit of input voltage 2 Upper limit of input voltage 2 Lower limit of input voltage 3 Upper limit of input voltage 3 Lower limit of input voltage 4 Upper limit of input voltage 4 Lower limit of input voltage 5 Upper limit of input voltage 5 Lower limit of input voltage 6 Upper limit of input voltage 6
Faulty MRFD-210304 Management Faulty MRFD-210304 Management Faulty MRFD-210304 Management Faulty MRFD-210304 Management Faulty MRFD-210304 Management Faulty MRFD-210304 Management Faulty MRFD-210304 Management Faulty MRFD-210304 Management Faulty MRFD-210304 Management Faulty MRFD-210304 Management Faulty MRFD-210304 Management Faulty MRFD-210304 Management
NOAMRFUL LTOHALFHO Non-AMR F-H Ho ALLOW Allowed BSC6900
Whether to allow nonSET AMR voice GCELLHOBASI F-H HUAWEI II C(Optional) handover GBFD-510501 Handover
NOAMRFUL LTOHALFHO Non-AMR F-H Ho ATCBADJST ATCB Adjust EP Step BSC6900
Decides the offset of the current ATCB together with other two parameters : "F-H Ho Period" and period of triggering a F-H handover, thus selecting target users for FH handovers. ATCB offset = (Period of triggering a F-H handover / "F-H Ho Period" + 1) * "NonSET AMR F-H GCELLHOBASI Ho ATCB HUAWEI II C(Optional) Adjust GBFD-510501 Handover When the ATCB value of non-AMR full rate voice is no smaller than this parameter, the condition for nonSET AMR F-H GCELLHOBASI handovers HUAWEI II C(Optional) is met. GBFD-510501 Handover
NOAMRFUL LTOHALFHO ATCBTHRES Non-AMR F-H Ho H ATCB Threshold BSC6900
NOAMRFUL LTOHALFHO Non-AMR F-H Ho PATHADJST Pathloss Adjust EP Step BSC6900
Decides the current path cost offset together with other two parameters : "F-H Ho Period" and period of triggering a F-H handover, thus selecting target users for FH handovers. Path cost offset = (Period of triggering a F-H handover / "F-H Ho Period" + 1) * "NonAMR F-H SET Ho GCELLHOBASI Pathloss HUAWEI II C(Optional) Adjust GBFD-510501 Handover When the path loss value of non-AMR full rate voice is no larger than this parameter, the condition for nonSET AMR F-H GCELLHOBASI handovers HUAWEI II C(Optional) is met. GBFD-510501 Handover
NOAMRFUL LTOHALFHO Non-AMR F-H Ho PATHTHRES Pathloss H Threshold BSC6900
NOAMRFUL LTOHALFHO QUALTHRES Non-AMR F-H Ho H Qual. Threshold BSC6900
Quality threshold for nonAMR F-H handovers. When the uplink receive quality and downlink receive quality of a user are both smaller than this parameter, a F-H handover SET is triggered GCELLHOBASI for the HUAWEI II C(Optional) user. GBFD-510501 Handover When the load of a cell is no smaller than this threshold, non-AMR F-H handovers SET are GCELLHOBASI triggered in HUAWEI II C(Optional) the cell. GBFD-510501 Handover When the ATCB value of non-AMR half rate voice is no larger than this threshold, the condition for nonSET AMR H-F GCELLHOBASI handovers HUAWEI II C(Optional) is met. GBFD-510501 Handover
NOAMRFUL LTOHALFTH Non-AMR F-H RESH Traffic Threshold BSC6900
NOAMRHAL FTOFULLHO ATCBTHRES Non-AMR H-F Ho H ATCB Threshold BSC6900
NOAMRHAL FTOFULLHO Non-AMR H-F Ho PATHTHRES Pathloss H Threshold BSC6900
When the path loss value of non-AMR half rate voice is no smaller than this threshold, the condition for nonSET AMR H-F GCELLHOBASI handovers HUAWEI II C(Optional) is met. GBFD-510501 Handover Whether to trigger nonAMR H-F handovers according to the uplink and SET downlink GCELLHOBASI receive HUAWEI II C(Optional) quality GBFD-510501 Handover Quality threshold for nonAMR H-F handovers. When the receive quality of a user is no smaller than this parameter, the user meets the SET condition GCELLHOBASI for H-F HUAWEI II C(Optional) handovers. GBFD-510501 Handover
NOAMRHAL FTOFULLHO Allow Non-AMR QUALALLO H-F QualityW based HO
BSC6900
NOAMRHAL FTOFULLHO QUALTHRES Non-AMR H-F Ho H Qual. Threshold BSC6900
NOAMRHAL FTOFULLTH Non-AMR H-F RESH Traffic Threshold BSC6900
When the load of a cell is no larger than this threshold, non-AMR H-F handovers SET are GCELLHOBASI triggered in HUAWEI II C(Optional) the cell. GBFD-510501 Handover
NODET
Adjacent Node Type
BSC6900
Ater Compression ADD Type of the GBFD-116902 Transmission ADJNODE(Man adjacent GBFD-118605 IP QOS datory) node GBFD-113726 TC Pool Decisions of nodownlink measurem ent report handovers can be made only when the number of consecutiv e nodownlink measurem ent reports in the current call HUAWEI I SET is no larger Handover GCELLHOEMG( than this GBFD-110601 HUAWEI II Optional) parameter. GBFD-510501 Handover Whether to enable the nodownlink measurem HUAWEI I SET ent report Handover GCELLHOEMG( handover GBFD-110601 HUAWEI II Optional) algorithm GBFD-510501 Handover
Cons.No Dl NODLMRHO Mr.HO Allowed ALLOWLIMIT Limit
BSC6900
NODLMRHO No Dl Mr.HO EN Allowed
BSC6900
NODLMRHO No Dl Mr.Ul Qual QUALLIMIT HO Limit BSC6900
When a certain number of nodownlink measurem ent reports are received consecutiv ely and the uplink receive quality is no smaller than this parameter, nodownlink measurem ent report emergency handovers are triggered. Nodownlink measurem ent report emergency handovers HUAWEI I SET choose the Handover GCELLHOEMG( inter-cell GBFD-110601 HUAWEI II Optional) handover GBFD-510501 Handover
NOMINALCA Norminal PACITY Capacity{AH}
BSC6900
Normal output capacity of the battery group in specific dischargin g conditions (such as discharge rate, temperatur e, and final voltage). Generally, the parameter is based SET on 10-hour BTSPMUBP(Opt discharge ional) rate. GBFD-111202 O&M of BTS Whether to enable the III power control algorithm for NonAMR calls. If enabled, power control is SET performed HUAWEI III GCELLPWR3(O on NonPower Control ptional) AMR calls. GBFD-117601 Algorithm
NONAMRCA Allow III Power LLPCALLOW Control For NonED AMR BSC6900
NONDRXPE RIOD Non-DRX Period BSC6900
SET GCELLNWCTR LMSRPARA(Opt ional)
Period when the cell is in the nonNetworking DRX state GBFD-119107 Control Mode
A ALD Cur-Minor NormalCurDu Alarm N-Cur rA Duration BSC6900
When the ANT_A tributary antenna current abnormally check mode is set to Mode 3, the parameter ALD Current Prompt Alarm is checked by periodical pulse. The periodical pulse consists of antenna overcurrent duration and normal Faulty current Management duration. Connection This with TMA SET parameter (Tower BTSRXUBP(Opt is the MRFD-210304 Mounted ional) ANT_A MRFD-210601 Amplifier)
B ALD Cur-Minor NormalCurDu Alarm N-Cur rB Duration BSC6900
When the ANT_B tributary antenna current abnormally check mode is set to Mode 3, the parameter ALD Current Prompt Alarm is checked by periodical pulse. The periodical pulse consists of antenna overcurrent duration and normal Faulty current Management duration. Connection This with TMA SET parameter (Tower BTSRXUBP(Opt is the MRFD-210304 Mounted ional) ANT_B MRFD-210601 Amplifier)
Cell Normal NORMALRE Reselection SELALLOW Allowed
BSC6900
Whether to allow the cell normal reselection . If this parameter is set to PERMIT and "NC2 Load Reselectio n Switch" is set to Support, the load of the target cell is involved in the algorithm for NC2 SET cell GCELLNC2PAR reselection A(Optional) . GBFD-116201
NORTHD
Normal Work TEMP Threshold BSC6900
Normal work temperatur SET e threshold BTSCABPARA( of the Optional) cabinet GBFD-111202 O&M of BTS Whether to discard paging messages without TMSIs and all-cell paging messages that considerab ly increase the load on the BSC GSM Flow system GBFD-111705 Control
NOTMSIALL CELLPAGIN Discard TMSI All GLIMITFLAG Cell Paging BSC6900
NOTRASP
Statistical Period of No-traffic BSC6900
Maximum number of measurem ent periods in which there is no traffic. If the number of measurem ent periods in which there is no traffic reaches this parameter, the BTS reports an alarm indicating SET that there GTRXRLALM(O is no ptional) traffic. GBFD-111004
NOVGCSTIM No VGCS Call E Time
BSC6900
If the BTS works in fallback mode and uplink VGCS connection is idle for a period specified by this parameter, the BTS disables the VGCS connection automatica lly. This parameter is valid only for useroriginated VGCS calls and is invalid for SET fixed Group Call BTSFALLBACK( VGCS Reliability Optional) calls. GBFD-510309 Enhancing
NQUERIES
Number of TRACERT Packages Per TTL
BSC6900
Filter Length for SDCCH NRBSDCCH NBR_RCVD_BL FFLEN OCK
BSC6900
Number of TRACERT TRC packets IPADDR(Option sent to al) each TTL None For the purpose of accurately reflecting the radio environme nt of a network, filtering is performed on the measured values in several consecutiv e measurem ent reports. This parameter indicates the number of enhanced measurem ent reports received on a signaling channel used to SET filter the GCELLHOFITP NBR_RCV EN(Optional) D_BLOCK GBFD-117501
None
Enhanced Measurement Report(EMR)
Filter Length for TCH NRBTCHFFL NBR_RCVD_BL EN OCK
BSC6900
For the purpose of accurately reflecting the radio environme nt of a network, filtering is performed on the measured values in several consecutiv e measurem ent reports. This parameter indicates the number of enhanced measurem ent reports received on a service channel used to SET filter the Enhanced GCELLHOFITP NBR_RCV Measurement EN(Optional) D_BLOCK GBFD-117501 Report(EMR) Network resource indication that specifies a ADD CN node in NRIMSCMAP(M the MSC GBFD-117401 MSC Pool andatory) pool GBFD-119701 SGSN Pool Identifies the mapping relation from the NRI to the SGSN uniquely ADD with the NRISGSNMAP( operator Mandatory) name GBFD-119701 SGSN Pool
NRI
NRI Value
BSC6900
NRI
NRI Value
BSC6900
Support NRofFDDCell NR_of_FDD_cells Flag Writing BSC6900
Controls the values of the FDD_Indic 0 field, the NR_OF_F DD_CELL S field, and the FDD_Celli nformation field in 2quater and MI when 3G neighborin g cells with scrambling code 0 are present. When this parameter is set to YES, FDD_Indic 0 is set to 1, the NR_OF_F DD_CELL S count does not include System cells with Information scrambling GBFD-111101 Sending
NSEI
NSE Identifier
BSC6900
ADD NSE(Mandatory) ADD NSVC(Mandator y) ADD NSVLLOCAL(M andatory) ADD NSVLREMOTE( Mandatory) ADD PTPBVC(Manda tory) BLK Identifies a PTPBVC(Manda unique Gb Interface tory) NSE GBFD-119001 Function
NSEI
NSE Identifier
BSC6900
NCell Filter NSIGSTRFL Length for TLEN SDCCH Level
BSC6900
The identifier of a network service entity (NSE).An NSE ADD manages a GCELLQUICKS group of Gb Interface ETUP(Optional) NSVCs. GBFD-119001 Function For the purpose of accurately reflecting the radio environme nt of a network, filtering is performed on the measured values in several consecutiv e measurem ent reports. This parameter indicates the number of measurem ent reports received on signaling channels used for the filtering HUAWEI I SET of Handover GCELLHOFITP neighborin GBFD-110601 HUAWEI II EN(Optional) g cell GBFD-510501 Handover Whether the cell is located in the south SET latitude or GCELLLCS(Opti north onal) latitude BSS-Based LCS (Cell ID + TA) SoftGBFD-115402 Synchronized GBFD-118201 Network
NSLATI
NS Latitude
BSC6900
NSVCI
NSVC Identifier
BSC6900
NSVC ID, identifies a unique NSVC. This ID must be negotiated ADD with the NSVC(Mandator peer y) SGSN. GBFD-510002 Gb Over FR ADD NSVC(Mandator y) BLK NSVC(Mandator y) NSVC index, identifies a unique NSVC. GBFD-510002 Gb Over FR If the inlet temperatur e is between "High Temperatu re Critical Point" and "Low Temperatu re Critical Point" and the difference between the inlet temperatur e and the ambient temperatur e reaches the value of this parameter, the temperatur e control system controls the difference SET between BTSDHEUBP(O the inlet ptional) and outlet GBFD-111202 O&M of BTS
NSVCIDX
NSVC Index
BSC6900
NTDI
Normal Temperature Delta Tin
BSC6900
NTDO
Normal Temperature Delta Tout
BSC6900
If the outlet temperatur e is between "High Temperatu re Critical Point" and "Low Temperatu re Critical Point" and the difference between the outlet temperatur e and the inlet temperatur e reaches the value of this parameter, the temperatur e control system controls the difference SET between BTSDHEUBP(O the inlet ptional) and outlet GBFD-111202 O&M of BTS Number of retransmis sions of the VGCS SET UPLINK Public Voice GCELLGSMR(O GRANT Group Call ptional) message GBFD-510301 Service Ratio of the minimum guarantee bandwidth of the OAM Abis IP over SET stream to E1/T1 ETHPORT(Opti the port GBFD-118611 A IP over onal) bandwidth GBFD-118622 E1/T1
NY2
Ny2
BSC6900
OAMFLOWB OAM flow min W bandwidth[%]
BSC6900
BSC6900
Minimum guarantee Abis IP over bandwidth E1/T1 ADD of the GBFD-118611 A IP over PPPLNK(Option OAM GBFD-118622 E1/T1 al) stream GBFD-111202 O&M of BTS
BSC6900
Minimum guarantee Abis IP over bandwidth E1/T1 ADD of the GBFD-118611 A IP over MPGRP(Optiona OAM GBFD-118622 E1/T1 l) stream GBFD-111202 O&M of BTS Minimum guarantee bandwidth ADD of the IPLOGICPORT( OAM GBFD-118605 IP QOS Optional) stream GBFD-111202 O&M of BTS Ratio of the minimum guarantee bandwidth of the OAM ADD stream to O&M of BTS ETHTRK(Option the port GBFD-111202 Link al) bandwidth MRFD-210103 aggregation
BSC6900
BSC6900
OAMFLOWD DSCP of OAM SCP flow
BSC6900
DSCP value of the OAM stream. The data of the OAM stream are not added to queues 0 to 5 for transmissi on. Instead, the data of the OAM stream is added to SET the QUEUEMAP(Ma dedicated ndatory) queue. GBFD-111202 O&M of BTS
OAMMINBW OAM flow min KEY bandwidth switch BSC6900 OBJECTTYP E Operate Object OBJECTTYP E Object Type
BSC6900
BSC6900
OBJIDX
User Index
BSC6900
Minimum guarantee bandwidth SET switch of O&M of BTS QUEUEMAP(Op the OAM GBFD-111202 Link tional) stream MRFD-210103 aggregation SET BTSANTANGLE Operation Remote (Mandatory) object MRFD-210602 Electrical Tilt STR TRXBURSTTST Type of the BTS Test (Mandatory) object GBFD-111207 Function ADD GCSCHRUSER( Index of Optional) object GBFD-111203 O&M of BSC This parameter ADD indicates GPSCHRUSER( the object Optional) index. None
OBJIDX
Object Index
BSC6900
None
OBJTP
Object Type
BSC6900
Shield type of the alarm. "ALL" indicates one shield ADD type OBJALMSHLD( instead of Faulty Mandatory) all types. MRFD-210304 Management Type of the ADD alarm BTSOBJALMSH shield Faulty LD(Mandatory) object MRFD-210304 Management Object index types used when commands SET are Configuration FHO(Mandatory) executed MRFD-210301 Management When the PDCHs are insufficient, the streaming service with high priority can preempt the PDCHs that are seized by the streaming service with low priority. After the PDCH resource preemption , the streaming service with low priority initiates the QoS negotiation SET with the GCELLPSOTHE SGSN. If RPARA(Optiona the QoS Streaming l) negotiation GBFD-119901 QoS(GBR)
OBJTP
Object Type
BSC6900
OBJTYPE
Object Type
BSC6900
Preempt Switch OccupyStrea of Streaming mingSwitch Resource
BSC6900
OLTOULHO ALLOW
OL to UL HO Allowed
BSC6900
OMLBKUP
Configure Backup OML BSC6900
Whether to allow SET overlay-toGCELLHOIUO( underlay Optional) handovers GBFD-113201 Concentric Cell This parameter specifies whether to configure the backup OML. When YES is configured in the BTS, an OML is configured in timeslot 31 of port 0 and port 1 respectivel y. The links are establishe d on the two ports in turn after the BTS is reset. Once the OML is establishe d on a port, SET it is always BTSOMLBACK used UP(Optional) unless the GBFD-113728 OML Backup
OMLDETEC OML Detection TSWITCH Switch
BSC6900
SET BTSOMLDETE CT(Mandatory)
If OML Detection Switch is set to OFF, then the OML timeslot automatic detection is not supported. In this case, the OML is carried on the default timeslots. If OML Detection Switch is set to ON, then the OML timeslot automatic detection is supported. In this case, you can run the "SET BTSOMLT S" GBFD-111202 O&M of BTS
OmlDetectTi OML Lapd Link me Detect Time
BSC6900
This parameter specifies the detecting time of AbisBypass site OML when it is broken. GBFD-116601 Abis Bypass Differentiat ed service code of the specified OML GBFD-111202 O&M of BTS The summation of average downbandwidth of OML&ESL link in BTS. GBFD-111202 O&M of BTS
OMLDSCP
OML DSCP
BSC6900
OMLESLDL
BTS OML&ESL Average Downbandwidth
BSC6900
SET BTSBWPARA( Mandatory)
OMLESLUL
BTS OML&ESL Average Upbandwidth
BSC6900
The summation of average upbandwidth of OML&ESL link in BTS. GBFD-111202 O&M of BTS Service priority of the specified OML
OMLPRI
OML Priority
BSC6900
None
None
OMLSP
OML Service PRI BSC6900
Priority of services on the OML. The operation and maintenan ce link (OML) is used to transfer the OM information between the BSC6900 and BTS. This parameter indicates the priority of services on the SET OML.0 is BSCSRVPRI(Op the highest tional) priority. GBFD-118605 IP QOS SET BSCABISPRIM AP(Optional) Specified OML Vlan Id GBFD-111202 O&M of BTS
OMLVLANID OML VlanId
BSC6900
OMLWS
OML/ESL/EML LAPD Downlink Window Size
BSC6900
Size of the OML/ESL/ EML SET Downlink BTSLAPDWS(O LAPD ptional) window GBFD-118601 Abis over IP
OMUIP
OMU External Network Virtual IP BSC6900
External virtual IP ADD address of EMSIP(Optional) the OMU GBFD-111202 O&M of BTS Subnet mask of the OMU in the ADD external EMSIP(Optional) network
OMUMASK
OMU External Network Mask
BSC6900
OP
Operator
BSC6900
EXP LOG(Optional) ADD OP(Mandatory) ULK USR(Mandatory) ADD Account of O&M of BSC BTSOP(Mandat the GBFD-111203 Security ory) operator MRFD-210305 Management Code of the original signaling point (OSP) in the signaling network. In the signaling network, each signaling point is identified ADD by a Configuration GCELLOSPMA signaling MRFD-210301 Management P(Mandatory) point code. GBFD-118701 RAN Sharing
OPC
OSP Code
BSC6900
OPC
OSP Code
BSC6900
Code of the signaling point of the local office in the signaling network. In the signaling network, each signaling point has a ADD correspond GCELLQUICKS ing ETUP(Mandator signaling y) point code. GBFD-111202 O&M of BTS BLK ACIC(Mandatory ) ADD AE1T1(Mandato ry) Uniquely identifies an OSP. see "ADD A Interface OPC" Circuit command. GBFD-111803 Management Primary operator or secondary operator. Primary operator is an operator that provides equipment, whereas secondary operator is ADD an GCNOPERATO operator R(Mandatory) that leases GBFD-118701 RAN Sharing Index of the operator. This parameter uniquely ADD identifies GCNOPERATO an R(Mandatory) operator. GBFD-118701 RAN Sharing
OPCIDX
OPC Index
BSC6900
OperatorType Operator Type
BSC6900
OPINDEX
Operator Index
BSC6900
OPINDEXSE T OP INDEX SET
BSC6900
Operator index set ADD to which GCBSADDR(Ma the CBC ndatory) belongs
GBFD-118701 RAN Sharing
OPMODE
Operate mode
BSC6900
In the normal mode, if the board cannot be reset, no operation is performed. In the force mode, if the board cannot be reset, the operation UPD is BSC/RNC JTGCPLD(Mand performed Software atory) by force. MRFD-210401 Management
OPMODE
Operation Mode
BSC6900
It is one key filed of identifying A interface CIC status and indicates the alignment BLK mode of A A Interface ACIC(Mandatory interface Circuit ) circuit. GBFD-111803 Management
OPMODE
Operation Mode
BSC6900
It is one key filed of identifying Ater interface timeslot status and indicates the alignment mode of BLK Ater Ater Interface ATERE1T1(Man interface 4:1 datory) circuit. GBFD-111801 Multiplexing
OPMODE
Operation Mode
BSC6900
It is one key filed of identifying A interface timeslot status and indicates the alignment BLK mode of A A Interface AE1T1(Mandato interface Circuit ry) circuit. GBFD-111803 Management It is one key filed of identifying Pb interface CIC status and indicates BLK the Pb PBCIC(Mandato interface ry) CIC. GBFD-111203 O&M of BSC
OPMODE
Operation Mode
BSC6900
OPNAME
Operator Name
BSC6900
ADD GCNNODE(Man datory) ADD GCNOPERATO R(Mandatory) ADD GCELL(Optional ) ADD GEXTSMLC(Ma ndatory) ADD GEXT2GCELL( Optional) ADD GEXT3GCELL( Optional) ADD NSE(Mandatory) ADD SGSNNODE(Ma ndatory) ADD NRISGSNMAP( Mandatory) ADD PCU(Mandatory)
Name of the operator. This parameter uniquely identifies an operator GBFD-118701 RAN Sharing
Assign Optimum OPTILAYER Layer
BSC6900
Channel assignmen t policies used when TCHs are assigned in an IUO cell: SysOpt: The system selects the preferential ly-assigned service layer and assigns channels according to the measurem ent reports on SDCCHs; USubcell: preferential ly assigns the TCHs on the underlay; OSubcell: SET preferential GCELLHOIUO( ly assigns Optional) the TCHs GBFD-113201 Concentric Cell
OPTILEVTH Assign-optimumRES level Threshold BSC6900
Preferentia lly assigns channels on the overlay when the uplink receive level on the SDCCH is no smaller than "Assignoptimumlevel Threshold" and the TA is smaller than "TA Threshold of Assignmen t Pref"; otherwise, assigns channels on the underlay to ensure successful SET channel GCELLHOIUO( assignmen Optional) t. GBFD-113201 Concentric Cell
OPTITATHR TA Threshold of ES Assignment Pref
BSC6900
Preferentia lly assigns channels on the overlay when the uplink receive level on the SDCCH is no smaller than "Assignoptimumlevel Threshold" and the TA is smaller than "TA Threshold of Assignmen t Pref"; otherwise, assigns channels on the underlay to ensure successful SET channel GCELLHOIUO( assignmen Optional) t. GBFD-113201 Concentric Cell
OPTL
TRX Priority
BSC6900
This parameter specifies the TRX priority in channel assignmen t. The smaller this parameter is, the higher the TRX priority is. For two TRXs with other conditions identical, channels on the TRX with higher priority are SET preferential GTRXDEV(Opti ly onal) assigned. GBFD-111005
OPTM
Optical interface standard
BSC6900
SET OPT(Optional)
Optical interface standard
OPTP
Operation Type
BSC6900
SWP BTSBRD(Manda Type of the tory) operation GBFD-111202 O&M of BTS The operation type can be "FORBID" SET or BTSFORBIDTS( "RESTOR Mandatory) E". GBFD-111202 O&M of BTS
OPTYPE
Operate Type
BSC6900
OPX
OPX
BSC6900
Iur-g signaling point index of an ADD internal GNRNC(Mandat RNC in GU MBSC Load ory) mode MRFD-211402 Balancing
ORIPORT
Originally E1/T1 Port No.
BSC6900
If "Port Type" is set to "TOPEXT OUTPORT ", this parameter determines the extended E1/T1 port through which the timeslots on the source E1/T1 port are used by other boards. If "Port Type" is set to "TOPEXTI NPORT", ADD this BTSTOPCONFI parameter G(Mandatory) is set 255. MRFD-211501
OT
Operation type
BSC6900
CON PATCH(Optional ) LOD Operation BSC/RNC PATCH(Optional type of the Software ) command. MRFD-210401 Management
OTHERFRE Q
Other Frequency BSC6900
Ordinary frequency. Multiple frequencie s are separated by "&". For example, "22&33&44 &55" are allocated ADD to TRXs in GCELLQUICKS ascending Frequency ETUP(Optional) order. GBFD-110101 Band This parameter indicates the total number of hardware modules, SET excluding BTSOTHPARA( those of Optional) GSM. GBFD-114201 EGPRS One of the parameters that decide the underlay and overlay areas in an enhanced IUO cell. The underlay and overlay areas are decided by "OtoU HO Received Level Threshold" , "UtoO HO Received Level Threshold" , "RX_QUAL Threshold" , "TA SET Threshold" GCELLHOIUO( , and "TA Optional) Hysteresis" GBFD-113201 Concentric Cell
OTHMODNU Number of OtherM RAT Modules BSC6900
OtoU HO OTOURECEI Received Level VETH Threshold
BSC6900
UL Subcell OUTASSOP Assignment TEN Optimization
BSC6900
Whether to assign channel requests initiated in the underlay subcell to the overlay or underlay subcells according to "UL Subcell General Overload Threshold" . If the load of the underlay is higher than "UL Subcell General Overload Threshold" , incoming calls in the underlay subcell will be SET preferential GCELLHOEDB ly assigned Enhanced DualPARA(Optional) to the GBFD-114402 Band Network
OUTBSCHO CLEARTIME R T8
BSC6900
The timer is used to set the time when the BSC6900 waits for a handover success message after a handover command is sent in an outgoing BSC handover. If the timer expires, the outgoing HUAWEI I SET BSC Handover GCELLTMR(Opt handover GBFD-110601 HUAWEI II ional) fails. GBFD-510501 Handover The timer is used to set the time when the BSC6900 waits for an HO REQ ACK message after a Handover Request message is reported in an outgoing BSC handover. If the timer expires, the outgoing HUAWEI I SET BSC Handover GCELLTMR(Opt handover GBFD-110601 HUAWEI II ional) fails. GBFD-510501 Handover
OUTBSCHO CMDTIMER T7
BSC6900
OutBscLoad HoEn
Inter BSC Load Information Allowed
BSC6900
Whether to use external 2G neighborin g cells as the target HUAWEI I SET cells of Handover GCELLHOAD(O load GBFD-110601 HUAWEI II ptional) handovers GBFD-510501 Handover
UL Subcell OUTGENOV General Overload ERLDTHRED Threshold BSC6900
When the load of the underlay subcell is higher than this parameter, some of the calls in the underlay subcell will be switched to the overlay subcell, and channels in the overlay subcell will be preferential ly assigned to calls initiated in the SET underlay GCELLHOEDB subcell as Enhanced DualPARA(Optional) well. GBFD-114402 Band Network
OUTHOPWR OVERLOAD Power Overload THRESHOL Threshold In Ho. D Out
BSC6900
Outgoing OL OUTINNREX Subcell HO Level LEVTHRED TH BSC6900
Power overload threshold for triggering outgoing handover from the TRX under the prerequisit e that the power amplifier of the TRX provides the maximum output power. If the power overload exceeds this threshold, the TRX triggers outgoing Enhanced SET handover Channel GTRXDEV(Opti for lack of Assignment onal) power. GBFD-111005 Algorithm Lower threshold of the overlay level during overlay-tounderlay handovers. When the receive level of an MS is higher than this threshold, the MS can be switched to SET the GCELLHOEDB underlay Enhanced DualPARA(Optional) subcell. GBFD-114402 Band Network
OUTLOADH OENABLE Load HO Allowed BSC6900
Whether to switch some of the calls in the underlay subcell to the overlay when the load of the underlay is SET higher than GCELLHOEDB this Enhanced DualPARA(Optional) parameter GBFD-114402 Band Network If the underlay load is higher than "UL Subcell Serious Overload Threshold" , the underlay-tooverlay handover period subtracts a value that equals this threshold from "UL Subcell Load Hierarchic al HO SET Periods" GCELLHOEDB every Enhanced DualPARA(Optional) second. GBFD-114402 Band Network
MOD Step LEN of OUTLOADH UL Load HO OMODPERI Period BSC6900
UL Subcell Load OUTLOADH Hierarchical HO OPERIOD Periods
BSC6900
When the load of the underlay subcell exceeds "UL Subcell General Overload Threshold" , all the calls that are using this cell as the serving cell generate handover requests at the same time, which will suddenly increase the load of the BSC and possibly cause congestion in the SET overlay GCELLHOEDB subcell, Enhanced DualPARA(Optional) thus GBFD-114402 Band Network Level step during underlay-tooverlay SET hierarchica GCELLHOEDB l load Enhanced DualPARA(Optional) handovers GBFD-114402 Band Network
Step Length of OUTLOADH UL Subcell Load OSTEP HO
BSC6900
OUTLOWLO UL Subcell Lower ADTHRED Load Threshold BSC6900
When the load of the underlay subcell is lower than this parameter, some of the calls in the overlay subcell will be switched to the underlay subcell, and channels in the underlay subcell will be preferential ly assigned to channel requests initiated in SET the overlay GCELLHOEDB subcell as Enhanced DualPARA(Optional) well. GBFD-114402 Band Network
OUTMASK
Out BSC Mask
BSC6900
Specifies the ADD timeslot SEMILINK(Optio mask out nal) BSC6900 Outgoing ADD BSC6900 SEMILINK(Mand port atory) number
SemiPermanent GBFD-114701 Connection SemiPermanent GBFD-114701 Connection
OUTPN
Out BSC Port No. BSC6900
OUTPORTN O DXX Out Port No. BSC6900
ADD DXXTSEXGREL ATION(Mandato ry) ADD DXXTSEXGREL ATION(Mandato ry)
Number of the outgoing port of the DXX GBFD-111203 O&M of BSC Number of the outgoing timeslot of the DXX GBFD-111203 O&M of BSC
OUTPORTT S
DXX Out Time Slot No.
BSC6900
OUTPUT0
Cannel 0 Digital Control Signal Level
BSC6900
Level of the accessed alarm signal. If the alarm signal has high level, this parameter should be set to 0. SET Otherwise, BTSDTMUBP(O it should ptional) be set to 1. GBFD-111202 O&M of BTS Level of the accessed alarm signal. If the alarm signal has high level, this parameter should be set to 0. SET Otherwise, BTSDTMUBP(O it should ptional) be set to 1. GBFD-111202 O&M of BTS
OUTPUT1
BSC6900
OUTPUT2
BSC6900
Level of the accessed alarm signal. If the alarm signal has high level, this parameter should be set to 0. SET Otherwise, BTSDTMUBP(O it should ptional) be set to 1. GBFD-111202 O&M of BTS Level of the accessed alarm signal. If the alarm signal has high level, this parameter should be set to 0. SET Otherwise, BTSDTMUBP(O it should ptional) be set to 1. GBFD-111202 O&M of BTS
OUTPUT3
BSC6900
OUTPUTPO WER Output Power
BSC6900
Output power of the location group. For a location group that consists of MRRU or GRRU boards, the default output power is 15W. For a location group that consists of DRRU boards, the default output power varies with frequency bands. That is, when the frequency band is 850M/900 ADD M, the BTSLOCGRP(M default andatory) output GBFD-510104 Multi-site Cell Output power of ADD the BTSLOCGRP(M location andatory) group
OUTPUTPO WER1 Output Power
BSC6900
GBFD-510104 Multi-site Cell
OUTPUTPO Output Power WERUNIT Unit
BSC6900
Output power unit ADD of the BTSLOCGRP(O location ptional) group GBFD-510104 Multi-site Cell
UL Subcell OUTSERIOV Serious Overload ERLDTHRED Threshold BSC6900
When the load of the underlay subcell is higher than this parameter, the underlay-tooverlay load handover period subtracts a period that equals "Step Length of UL Subcell Load HO" from "UL Subcell Load Hierarchic al HO Periods" every second, thus increasing SET the load GCELLHOEDB handover Enhanced DualPARA(Optional) speed. GBFD-114402 Band Network Whether to report a cell out-ofservice SET alarm after GCELLSOFT(O a cell is out ptional) of service GBFD-111202 O&M of BTS Outgoing ADD BSC6900 SEMILINK(Mand slot atory) number SemiPermanent GBFD-114701 Connection
Cell Out-ofOUTSERVIC Service Alarm EALM Switch
BSC6900
OUTSN
Out BSC Slot No. BSC6900
OUTSN
Load Outlet Slot No.
BSC6900
Slot number of the load ADD outlet ABISLOADSHA interface RE(Mandatory) board GBFD-111203 O&M of BSC
OUTSRN
Out BSC Subrack No. BSC6900
OutSysLoad HoEn
Allow Inter-RAT Load HO in Connect State
BSC6900
Outgoing ADD BSC6900 SemiSEMILINK(Mand subrack Permanent atory) number GBFD-114701 Connection This parameter specifies whether to allow the inter-RAT load handover in connection mode SET (after the GSM and GCELLHOINTE assignmen UMTS Load RRATLDB(Optio t is Balancing nal) complete). GBFD-511103 Based on Iur-g When the Service Handover field in an ASS REQ message is 0, a direct retry process targeted at a 3G network is initiated. If the direct retry fails, the system decides whether to re-assign channels for the current call based on GSM/WCDMA this Service Based parameter. GBFD-114321 Handover
OUTSYSSE RVHOREAS Service Handover SIGNEN Reassign BSC6900
OUTSYSSE Service Based RVICEHOEN Handover Switch BSC6900
When this parameter is set to Open, the BSS decides whether to hand over the current service to the 3G network according to the contents of the "Service Handover" information element in the ASS REQ and GSM/WCDMA HO REQ Service Based messages. GBFD-114321 Handover
OUTTIMER
Load Info Timeout Timer
BSC6900
Validity period for the BSC to keep the load information about a 3G ADD neighborin GNRNC(Optiona g cell on MBSC Load l) the RNC MRFD-211402 Balancing Outgoing BSC6900 ADD start SEMILINK(Mand timeslot atory) number
OUTTSN
Out BSC Start Timeslot No.
BSC6900
ANT_A ALD Over OverCurAlmT Current Occur hdA Threshold BSC6900
Abnormally alarm raise threshold triggered by too heavy current of the ANT_A tributary antenna. When the actual current is higher than the configured value, the ALD Current Abnormally Alarm is Faulty triggered Management with the Connection correspond with TMA SET ing alarm (Tower BTSRXUBP(Opt tributary MRFD-210304 Mounted ional) No. of 0. MRFD-210601 Amplifier)
ANT_B ALD Over OverCurAlmT Current Occur hdB Threshold BSC6900
Abnormally alarm raise threshold triggered by too heavy current of the ANT_B tributary antenna. When the actual current is higher than the configured value, the ALD Current Abnormally Alarm is Faulty triggered Management with the Connection correspond with TMA SET ing alarm (Tower BTSRXUBP(Opt tributary MRFD-210304 Mounted ional) No. of 0. MRFD-210601 Amplifier)
RET ALD Over OverCurAlmT Current Occur hdRET Threshold
BSC6900
Abnormally alarm raise threshold triggered by too heavy current of the RET tributary antenna. When the actual current is higher than the configured value, the ALD Current Abnormally Alarm is triggered with the correspond SET ing alarm BTSRXUBP(Opt tributary Faulty ional) No. of 0. MRFD-210304 Management Clearance threshold for the alarm triggered when the ANT_A tributary antenna is over current. When the actual current is below this Faulty threshold, Management the ALD Connection Current with TMA SET Abnormal (Tower BTSRXUBP(Opt Alarm is MRFD-210304 Mounted ional) cleared. MRFD-210601 Amplifier)
ANT_A ALD Over OverCurClrT Current Clear hdA Threshold BSC6900
ANT_B ALD Over OverCurClrT Current Clear hdB Threshold BSC6900
Abnormally alarm clearance threshold triggered by too heavy current of the ANT_B tributary antenna. When the actual current is lower than the configured value, the ALD Current Abnormally Alarm clearance Faulty is triggered Management with the Connection correspond with TMA SET ing alarm (Tower BTSRXUBP(Opt tributary MRFD-210304 Mounted ional) No. of 0. MRFD-210601 Amplifier) Clearance threshold for the alarm triggered when the RET tributary antenna is over current. When the actual current is below this threshold, the ALD Current SET Abnormally BTSRXUBP(Opt Alarm is Faulty ional) cleared. MRFD-210304 Management
RET ALD Over OverCurClrT Current Clear hdRET Threshold
BSC6900
A ALD Cur-Minor Alarm Over-Cur OverCurDurA Duration BSC6900
When the ANT_A tributary antenna current abnormally check mode is set to Mode 3, the parameter ALD Current Prompt Alarm is checked by periodical pulse. The periodical pulse consists of antenna overcurrent duration and normal Faulty current Management duration. Connection This with TMA SET parameter (Tower BTSRXUBP(Opt is the MRFD-210304 Mounted ional) ANT_A MRFD-210601 Amplifier)
B ALD Cur-Minor Alarm Over-Cur OverCurDurB Duration BSC6900
When the ANT_B tributary antenna current abnormally check mode is set to Mode 3, the parameter ALD Current Prompt Alarm is checked by periodical pulse. The periodical pulse consists of antenna overcurrent duration and normal Faulty current Management duration. Connection This with TMA SET parameter (Tower BTSRXUBP(Opt is the MRFD-210304 Mounted ional) ANT_B MRFD-210601 Amplifier)
OVERLOADI Overload NTV Indication Period BSC6900
Interval for the BTS transmittin g overload messages to the BSC6900. This parameter is used to control the reporting frequency of overload messages by the channel and TRX. The overload can be the TRX processor overload, downlink CCCH overload, or AGCH overload. For details, SET see GSM GCELLCCCH(O Rec. ptional) 08.58. Temperatu GBFD-111003
OVERTHD
Derating TEMP Threshold
BSC6900
re threshold of the SET derating BTSCABPARA( function of Optional) the cabinet GBFD-111202 O&M of BTS
P11
CPU Usage for Critical Paging FC
BSC6900
Threshold for critical flow control. When the usage of the CPU exceeds the threshold, the CPUS performs critical flow SET control for BSCFCPARA(O paging GSM Flow ptional) messages. GBFD-111705 Control Threshold for major flow control. When the usage of the CPU exceeds the threshold, the CPUS performs major flow SET control for BSCFCPARA(O paging GSM Flow ptional) messages. GBFD-111705 Control Threshold for minor flow control. When the usage of the CPU exceeds the threshold, the CPUS performs minor flow SET control for BSCFCPARA(O paging GSM Flow ptional) messages. GBFD-111705 Control
P12
CPU Usage for Major Paging FC BSC6900
P13
CPU Usage for Minor Paging FC BSC6900
P14
CPU Usage for Slight Paging FC BSC6900
PaAdjVol
PA Intelligent Adjust Voltage
BSC6900
Threshold for slight flow control. When the usage of the CPU exceeds the threshold, the CPUS performs slight flow SET control for BSCFCPARA(O paging GSM Flow ptional) messages. GBFD-111705 Control This parameter specifies whether the multicarrier transceiver unit supports the MultiCarrier Intelligent Voltage Regulation feature. When this parameter is set to YES, the multicarrier transceiver unit automatica lly regulates its working voltage according to the power Multi-Carrier SET requiremen Intelligent BTSOTHPARA( ts of a Voltage Optional) service. GBFD-111612 Regulation
Move Packet PACKASSDL Assignment Down SHIFT to BTS BSC6900
Whether to support the function of moving the packet assignmen t down to the BTS. To improve the access speed of the MS, after the packet assignmen t is moved down to the BTS, the BSC reserves the uplink resources for the BTS. The BTS obtains the channel request of the MB by analyzing SET the GCELLPSOTHE downlink RPARA(Optiona acknowled l) gement GBFD-119202
Packet Assignment Taken Over by the BTS
PAGINGAVG Average Paging CAPACITYIN Message Number PERIOD In Period BSC6900
Average number of paging messages SET allowed in GCELLSOFT(O a cell in a GSM Flow ptional) period GBFD-111705 Control
PAGINGLIFE BTS Paging TIME Lifetime
BSC6900
Lifetime of a paging message in the queue of the BTS. The setting of this parameter must be consistent with the setting of timer T3113 in the core network; otherwise, the efficiency of paging scheduling over the Um interface is reduced. It is recommen ded that this parameter SET be set to a GCELLSOFT(O value one ptional) to two GBFD-110303 Paging Maximum number of paging messages SET allowed in GCELLSOFT(O a cell in a GSM Flow ptional) period GBFD-111705 Control
PAGINGMAX MAX Paging CAPACITYIN Message Number PERIOD In Period BSC6900
PAGTIMES
Paging Times
BSC6900
For the BTS, this parameter is used to determine paging retransmis sions. This parameter and the number of paging times configured in the MSC determine the number of paging retransmis sions. The total number of paging times is approximat ely equal to the value of this parameter multiplied SET by the GCELLCCBASI number of C(Optional) paging GBFD-110303 Paging
PANDEC
PAN_DEC
BSC6900
This parameter sets the PAN_DEC value used by the counter N3102 of the MS. When the timer T3182 of the MS expires, the N3102 reduces the value of PAN_DEC. 0: the value of PAN_DEC is 0; 7: the value of PAN_DEC is 7; Value N indicates that PAN_DEC is N; Not use: this SET parameter GCELLPSBASE is not (Optional) used. GBFD-114101 GPRS
PANINC
PAN_INC
BSC6900
PANMAX
PAN_MAX
BSC6900
This parameter sets the PAN_INC value used by the counter N3102 of the MS. When receiving the packet uplink acknowled ged or unacknowl edged message sent by the network (V(S) or V(A) increases), the MS increases the count (PAN_INC) of the counter N3102. 0: the value SET of GCELLPSBASE PAN_INC (Optional) is 0; 7: the GBFD-114101 GPRS RAN_MAX value, the maximum value of the N3102. 4: the value of PAN_MAX is 4; 32: the value of PAN_MAX is 32. Value N indicates that PAN_DEC is N; Not use: this SET parameter GCELLPSBASE is not (Optional) used. GBFD-114101 GPRS
PAOPTILEV Priority of Shut EL Down TRX
BSC6900
Priority level at which the BSC shuts down the power amplifier of the TRX when the intelligent shutdown function is enabled. If this parameter is set smaller, the priority level is higher, the power amplifier of SET the TRX is GTRXDEV(Opti shut down onal) later. GBFD-111602 SET BTSAUTODLDA CTINFO(Mandat ory) SET BTSAUTODLDA CTINFO(Mandat ory)
PatchNo
Patch No.
BSC6900
Patch number of the TMU board software GBFD-111202 O&M of BTS Patch number of the TMU board software GBFD-111202 O&M of BTS
PatchNo1
Patch Number
BSC6900
PATHCHK
IP path check flag BSC6900
ADD IPPATH(Optiona IP path l) check flag GBFD-118605 IP QOS Abis over IP A over IP IP QOS Abis IP over E1/T1 A IP over E1/T1
PATHID
IP path ID
BSC6900
GBFD-118601 GBFD-118602 ADD Uniquely GBFD-118605 IPPATH(Mandat identifies GBFD-118611 ory) an IP path GBFD-118622 ADD IPMUX(Mandato ry) ADD IPPATHBIND(M andatory)
PATHID
IP path ID
BSC6900
IP path ID,Identifyi ng an IP path. None
None
PATHLOSS
Path Loss of Different Frequency Band
BSC6900
Transmissi on loss difference between radio frequencie SET s on GCELLPWRBA different Active Power SIC(Optional) bands GBFD-117602 Control Whether to perform path lossbased sorting in a SET better cell GCELLHOBASI handover HUAWEI II C(Optional) algorithm GBFD-510501 Handover
PATHLOSSH Pathloss Ho. OEN Enable
BSC6900
PATHT
IP path type
BSC6900
GBFD-118601 GBFD-118602 ADD GBFD-118605 IPPATH(Optiona Type of the GBFD-118611 l) IP path GBFD-118622
PATTYPE
Patch type
BSC6900
CON PATCH(Optional ) LOD BSC/RNC PATCH(Optional Software ) Patch type MRFD-210401 Management
PB
Pb
BSC6900
PBGT HO PBGTHOEN Allowed
BSC6900
BTS power attenuation SET on the GCELLPSPWP measured ARA(Optional) PBCCH GBFD-119115 Power Control Whether to use the PBGT handover algorithm. PBGT handovers are based on path loss. The PBGT handover algorithm searches in real time for cells that have lower path loss and meet certain system requiremen ts, and decides whether to perform the handovers. To avoid ping-pong SET handovers, GCELLHOBASI PBGT HUAWEI I C(Optional) handovers GBFD-110601 Handover
PBGTLAST
PBGT Valid Time BSC6900
The triggering of PBGT handovers must meet the P/N criteria, that is, when the condition for PBGT handovers is met for a consecutiv eP seconds during N seconds, a PBGT handover is triggered. This parameter correspond ADD s to the P G2GNCELL(Opti in the P/N HUAWEI I onal) criteria. GBFD-110601 Handover
PBGTMARGI PBGT HO N Threshold
BSC6900
PBGT handovers to a neighborin g cell are allowed only when the downlink level difference between the neighborin g cell and the serving cell is larger than this parameter. When the value of this parameter is smaller than 64, handovers to a neighborin g cell with a lower ADD level than G2GNCELL(Opti the current HUAWEI I onal) serving cell GBFD-110601 Handover
PBGTSTAT
PBGT Watch Time
BSC6900
The triggering of PBGT handovers must meet the P/N criteria, that is, when the condition for PBGT handovers is met for a consecutiv eP seconds during N seconds, a PBGT handover is triggered. This parameter correspond ADD s to the N G2GNCELL(Opti in the P/N HUAWEI I onal) criteria. GBFD-110601 Handover
MAX Retrans PbMtnMsgRe Maintenance Msg Send on Pb-I BSC6900
Maximum times for an external PCU to retransmit a PB interface maintenan ce message. When the PCU fails to receive a response to a PB interface maintenan ce message before the timer timeouts, it retransmits the PB interface maintenan ce message to the BSC. GBFD-114101 GPRS
PCADJPERI OD PC Interval
BSC6900
Minimum interval between two consecutiv SET e power Enhanced GCELLPWRBA control Power Control SIC(Optional) commands GBFD-110703 Algorithm
PCMEASCH PC_MEAS_CHA AN N BSC6900
Channel used for the measured receiving power. It is used to set the measured receiving power level of the channel and control SET the power GCELLPSPWP of the ARA(Optional) uplink. GBFD-119115 Power Control It is one key filed of identifying Pb interface CIC status and indicates the PCU No. correspond ing to the BLK Pb PBCIC(Mandato interface ry) CIC. GBFD-111203 O&M of BSC PCU number, identifying ADD a unique PCU(Mandatory) PCU. GBFD-114101 GPRS Port number of ADD the E1/T1 PBE1T1(Mandat of the Pb ory) interface GBFD-111203 O&M of BSC Number of the PCU to SET which the GCELLGPRS(M current cell andatory) belongs GBFD-114101 GPRS
PCU
PCU No
BSC6900
PCUINDEX
PCU No.
BSC6900
PCUNO
PCU No.
BSC6900
PCUNO
PCU No.
BSC6900
PCU Support PCUPREEM PREEMPT_ABIS PTFLAG _LINK Message BSC6900
Whether the PCU supports the PREEMPT _ABIS_LIN K message. If the BTS supports the FLEXABIS function, the CS service can preempt the timeslots on the Abis interface used by the PS service. After the preemption occurs, the BSC6900 sends a PREEMPT _ABIS_LIN SET K message BTSFLEXABISP to the PCU GBFD-111202 O&M of BTS ARA(Optional) if the PCU GBFD-117301 Flex Abis
PDCH Downlink PDCHDWNL Multiplex EV Threshold
BSC6900
PDCH downlink multiplex threshold, Indicating the maximum TBFs on the downlink PDCH (parameter value/10). We recomman d that the value of "Downlink Multiplex Threshold of Dynamic Channel Conversio n" should be less than "PDCH Downlink Multiplex Threshold" for SET triggering GCELLPSCHM( converting Optional) dynamic
PDCHPWRS PDCH Power AVEN Saving Enable
BSC6900
This parameter specifies whether to enable the Power Optimizatio n Based on Channel Type feature. The working voltage of the TRX varies with the modulation mode of the channel. When this parameter is set to YES, the TRX adopts the working voltage according SET to the GCELLSOFT(O modulation ptional) mode of GBFD-111606
Power Optimization Based on Channel Type
PDCHREFO RMING PDCH Reforming BSC6900
This parameter must be used together with "Level of Preemptin g Dynamic Channel" in the following conditions: 1. When "Level of Preemptin g Dynamic Channel" is set to "No preempt of service TCHF" and "PDCH Reforming" is set to PDCH "Yes", the Dynamic channels Adjustment for the CS Load Sharing service is Adaptive released if Adjustment of SET the CS GBFD-113101 Uplink and GCELLPSCHM( service GBFD-119303 Downlink Optional) fails to be GBFD-119501 Channels
PDCH Uplink Multiplex PDCHUPLEV Threshold
BSC6900
PDCH uplink multiplex threshold, indicating the maximum TBFs on the uplink PDCH (parameter value/10). We recomman d that the value of "Uplink Multiplex Threshold of Dynamic Channel Conversio n" should be less than "PDCH Uplink Multiplex Threshold" for triggering SET converting GCELLPSCHM( dynamic Optional) channel in
PDTMRVAL UE
PENDING timer
BSC6900
Pending ADD timer of the A over IP M3LKS(Optional M3UA link GBFD-118602 A IP over ) set GBFD-118622 E1/T1 SET GBSCREDGRP( Mandatory) SET BTSIP(Mandator y) Peer BSC ID. It identifies a BSC Node BSC. GBFD-113725 Redundancy ID of the peer BSC6900 GBFD-118601 Abis over IP
PeerBSCID
Peer BSC ID
BSC6900
PEERBSCID Peer BSC ID
BSC6900
PEERBSCIP Peer BSC IP
BSC6900
IP address of the peer BSC6900 on the SET homing Abis over IP BTSIP(Mandator BSC6900 GBFD-118601 BSC Node y) side GBFD-113725 Redundancy
PEERBSCM ASK Peer BSC Mask
BSC6900
Subnet mask of the port IP SET address at Abis over IP BTSIP(Mandator the peer GBFD-118601 BSC Node y) BSC6900. GBFD-113725 Redundancy Identifier of the peer BTS on the SET homing Abis over IP BTSIP(Mandator BSC6900 GBFD-118601 BSC Node y) side GBFD-113725 Redundancy Peer IP address of the PPP link. The IP address of the PPP link on the Abis IP over ADD peer side E1/T1 PPPLNK(Manda of the GBFD-118611 A IP over tory) BSC. GBFD-118622 E1/T1
PEERBTSID Peer BTS ID
BSC6900
PEERIP
Peer IP address
BSC6900
PEERIP
Peer IP address
BSC6900
Peer IP Abis IP over ADD address of E1/T1 MPGRP(Mandat the MP GBFD-118611 A IP over ory) group. GBFD-118622 E1/T1 Detects the IP STR address of IP Fault IPCHK(Mandato the Detection ry) gateway GBFD-118609 Based on BFD ADD BTSPPPLNK(M andatory) IMP BTSPPPLNK(M andatory)
PEERIP
Peer IP address
BSC6900
PEERIP
Peer IP Address
BSC6900
IP address of the peer end of BTS Abis IP over PPP Link. GBFD-118611 E1/T1
PEERIP
Peer IP Address
BSC6900
ADD BTSMPGRP(Ma ndatory) IMP BTSMPGRP(Ma ndatory)
IP address of the peer end of BTS MLPPP Abis IP over Group. GBFD-118611 E1/T1
PEERIP1
First destination IP address
BSC6900
First destination IP ADD address. A over IP SCTPLNK(Mand The invalid GBFD-118602 A IP over atory) value is 0. GBFD-118622 E1/T1
PEERIP2
Second destination IP address
BSC6900
Second destination IP ADD address. A over IP SCTPLNK(Optio The invalid GBFD-118602 A IP over nal) value is 0. GBFD-118622 E1/T1
PEERIPADD R Peer IP address
BSC6900
The peer IP address should not be the ADD same as IPPATH(Mandat the local ory) address. GBFD-118605 IP QOS
Peer subnet PEERMASK mask
BSC6900
GBFD-118601 GBFD-118602 ADD Subnet GBFD-118605 IPPATH(Optiona mask of GBFD-118611 l) the peer IP GBFD-118622
PEERPN
Destination SCTP port No. BSC6900
PEERVERSI ON Peer Version
BSC6900
ADD SCTPLNK(Mand atory) SET BTSLOADCTRL (Mandatory)
Destination A over IP SCTP port GBFD-118602 A IP over number GBFD-118622 E1/T1 Peer Software Version GBFD-111202 O&M of BTS
PENALTYEN Penalty Allowed
BSC6900
Whether to punish the target cell when a handover fails or to punish the current serving cell when a handover is of more TA or bad quality. After a handover fails due to congestion of the target cell, the system needs to punish the target cell to prevent the MS from attempting to switch to the target cell again. HUAWEI I SET Ping-pong Handover GCELLHOCTRL handovers GBFD-110601 HUAWEI II (Optional) can easily GBFD-510501 Handover
PENALTYLA Cell Penalty STTM Duration
BSC6900
Penalty duration for cell reselection . Cell penalty can be performed only in this duration. When this parameter is set to a greater value, the MS cannot reselect a cell for a longer time in the case of reselection failure or reselection due to load. The penalty timer is shorter when this parameter SET is set to a GCELLNC2PAR smaller A(Optional) value. GBFD-116201
PENALTYRX LEV Cell Penalty Level BSC6900
When the cell reselection failure message is received or the load cell reselection is initiated, the "Cell Penalty Level" is subtracted from the receive level of the target cell to avoid that cell reselection failure occurs repeatedly or that multiple MSs are reselected to the same target cell. SET This GCELLNC2PAR parameter A(Optional) is valid GBFD-116201
PENALTYTI MER
CfgPenaltyTimer BSC6900
Timer of penalty on a neighborin g cell when a handover fails due to faults of HUAWEI I SET data Handover GCELLHOFITP configurati GBFD-110601 HUAWEI II EN(Optional) on. GBFD-510501 Handover
PERIOD
Ping Check Period
BSC6900
ADD Ping check IPPATH(Optiona period of l) IP Path GBFD-118605 IP QOS Measurem ent period for each STR frequency NCS(Mandatory) group GBFD-510901 2G/3G Neighboring Cell Automatic Optimization
PERIOD
Measurement Period
BSC6900
PFC
Protocal field compress
BSC6900
Compressi on flag of the PPP Abis IP over ADD link E1/T1 PPPLNK(Option protocol GBFD-118611 A IP over al) domain GBFD-118622 E1/T1 Compressi on flag of the PPP Abis IP over ADD link E1/T1 MPGRP(Optiona protocol GBFD-118611 A IP over l) domain GBFD-118622 E1/T1 ADD BTSPPPLNK(O ptional) ADD BTSMPGRP(Op tional) IMP BTSPPPLNK(O ptional) IMP BTSMPGRP(Op tional)
PFC
Protocol field compress
BSC6900
PFC
Support Protocol Field Compress BSC6900
Whether to compress the protocol field of the Abis IP over PPP link. GBFD-118611 E1/T1
PFCSUP
PFC Support
BSC6900
ADD NSE(Optional)
Whether to support packet flow context (PFC). The PFC flow is used to control the QoS of the packet service of Streaming the MS. GBFD-119901 QoS(GBR)
PGCLASSIFI Paging Message NGALLOWE Classifying D Allowed BSC6900
Whether to support the paging message classificati on function: 0,close; 1,paging message classificati on flow control; SET 2,re-paging BSCFCPARA(O flow GSM Flow ptional) control. GBFD-111705 Control
PGMAXMSG Max CS Paging NUMINPERI Message Num in OD Period BSC6900
Maximum number of paging messages that the BSC6900 can process over the A interface SET within a BSCFCPARA(O measurem GSM Flow ptional) ent period GBFD-111705 Control
PGMAXPSM Max PS Paging SGNUMINPE Message Num in RIOD Period BSC6900
Maximum number of PS paging messages that the BSC6900 can process within a SET "Paging BSCFCPARA(O Statistical GSM Flow ptional) Period". GBFD-111705 Control
PGSTATPER Paging Statistical IOD Period BSC6900
Measurem ent period for calculating the arrival SET rate of BSCFCPARA(O paging GSM Flow ptional) messages GBFD-111705 Control
PHB
Per-Hop Behavior BSC6900
Value of the perSET hop PHBMAP(Mand behavior atory) (PHB)
GBFD-118605 IP QOS
PHB
PHB
BSC6900
PHB type Abis MUX ADD of the UDP MUX for IPMUX(Mandato IPMUX to GBFD-118604 A ry) be enabled GBFD-118610 Transmission Cell Reselect Parameter s Indication (PI), sent on the broadcast channel, indicates whether "Cell Reselect Offset", "Cell Reselect Temporary Offset" in the "SET GCELLIDL EAD" command, and "Cell Basic Cell ReReselect selection Penalty System Time" are GBFD-110402 Information used. GBFD-111101 Sending
PI
Cell Reselect Parameters Indication
BSC6900
Private Key PKPEnableSt Password a Enabled State
BSC6900
Whether to enable the private key password DISABLE: indicating that the private key password is disabled ENABLE: indicating that the SET private key CERTFILE(Opti password Security onal) is enabled MRFD-210305 Management Indicates the number of the packets for remote loopback STR test of the ETHOAMLOOP OAM in the TST(Optional) Ethernet GBFD-118630 Ethernet OAM Indicates the length of the packets for the remote loopback STR test of the ETHOAMLOOP OAM in the TST(Optional) Ethernet GBFD-118630 Ethernet OAM STR Loopback FRPORTLOOP( packet Mandatory) length None None
PKTCOUNT
PKT Count
BSC6900
PKTLEN
PKT Size[Byte]
BSC6900
PKTLEN
Packet Length
BSC6900
PKTLENTHR Maximum Frame ES Length BSC6900
Maximum multiplexin g frame length. The length of the multiplexed packet must not exceed the maximum multiplexin g frame length. If the length of the multiplexed packet exceeds the maximum multiplexin g frame length, the packet is transferred without being added with new subframes. ADD The frame BTSABISMUXF length LOW(Optional) refers to GBFD-118604 Abis MUX
PKTSI
PACKET SI
BSC6900
Whether the cell supports the PACKET SI STATUS flow. In the PACKET SI STATUS flow, the MS sends the Packet PSI/SI Status message to indicate that the MS has stored the system message. The network side sends the Packet Serving Cell Data message to notify SET the MS of GCELLGPRS(O the system Packet SI ptional) message GBFD-119801 Status Indicates the size of the PING packet, neither IP header nor ICMP header is included. None
PKTSIZE
Size of packet
BSC6900
PING IP(Optional)
None
PKTSIZE
PKT Size
BSC6900
PING MAC(Optional) PING BTSCFM(Option Sent al) packet size GBFD-118630 Ethernet OAM
PL1
Persistence Level 1 BSC6900
Persistenc e level 1 of the radio access priority. During MS access, the access priority of the MS is set. If the priority of the MS is higher than the access priority of the MS, the cell allows the access of the MS. Otherwise, the cell rejects the access of the MS. The value "no use" indicates this SET parameter GCELLPRACH( is not Optional) used. GBFD-119110 Access
PL16QAM
16QAM Transmitter Power Reduce Level
BSC6900
Power attenuation level of all the other timeslots of the BCCH except for timeslot 7 in 16QAM. The attenuation level ranges from 0 to 50, with the step of 0.2 dB. When the EDGE TRX sends signals in 16QAM, the transmit power must be lower than SET the mean GTRXDEV(Opti power in onal) GMSK. GBFD-114201 EGPRS
PL2
PL3
PL32QAM
32QAM Transmitter Power Reduce Level
BSC6900
Power attenuation level of all the other timeslots of the BCCH except for timeslot 7 in 32QAM. The attenuation level ranges from 0 to 50, with the step of 0.2 dB. When the EDGE TRX sends signals in 32QAM, the transmit power must be lower than SET the mean GTRXDEV(Opti power in onal) GMSK. GBFD-114201 EGPRS
PL4
PL8PSK
TRX 8PSK Level BSC6900
Power attenuation level of the EDGE TRX. There are 50 power attenuation levels. At each level, the power is attenuated by 0.2 dB. The spectrum requiremen ts are met only when the power of an EDGE transceiver for transmittin g 8PSK signals is lower than the average power for SET GMSK GTRXDEV(Opti modulation onal) . GBFD-114201 EGPRS
PLPRD
Packet lost measure period [100ms]
BSC6900
Statistics period of the packet drop ratio. This parameter indicates the period for collecting the statistics information about the packet drop ratio. Note that the unit of this parameter is 100 millisecond s. The actual delay statistics period is the value of this parameter multiplied ADD by 100 IPLOGICPORT( millisecond Optional) s. GBFD-118605 IP QOS
PLTH
Packet discard threshold[0.001]
BSC6900
PLYPOINT
Play Point
BSC6900
Packet drop ratio threshold for speed reduction. When the packet drop ratio exceeds the value of this parameter, the rate of the logical port is reduced. Note that the unit of this parameter ADD is a IPLOGICPORT( thousand Optional) to one. GBFD-118605 IP QOS SET Point at TCPLYVOICE(M which to andatory) play sound GBFD-111203 O&M of BSC
PLYSWITCH Play Switch
BSC6900
Whether to SET enable TCPLYVOICE(M sound andatory) playing GBFD-111203 O&M of BSC
PLYTIME
Play Time
BSC6900
Duration of sound playing. If this parameter is set to 0, the sound is played repeatedly. If this parameter exceeds the duration of the record file, the void sound is played SET for the TCPLYVOICE(O exceeding ptional) part. GBFD-111203 O&M of BSC CPU usage threshold for performan ce monitoring. When the average CPU usage of sliding windows reaches or exceeds the threshold, performan ce SET monitoring FCCPUTHD(Opt is GSM Flow ional) triggered. GBFD-111705 Control
PMCTHD
Performance monitor control threshold
BSC6900
PMCTHD
Performance monitor control threshold
BSC6900
Packet queue usage threshold for performan ce monitoring. When the average packet queue usage of sliding windows reaches or exceeds the threshold, performan ce monitoring is GSM Flow triggered. GBFD-111705 Control
PMI
Interval for Sending Cell Paging Package
BSC6900
Interval for sending cell paging group packets when Paging Messages Optimize at SET Abis GCELLSOFT(M Interface is andatory) enabled GBFD-110303 Paging Number of cell paging group packets when Paging Messages Optimize at SET Abis GCELLSOFT(M Interface is andatory) enabled GBFD-110303 Paging
PMNUM
Number of Cell Pagings in One Package
BSC6900
Cell Paging PMOAFLAG Package Switch
BSC6900
Whether to enable Paging Messages Optimize at Abis Interface. The BSC6900 combines multiple paging messages to a cell paging package and then sends the package to the BTS. The package reduces header overhead and thus reducing SET the load on GCELLSOFT(O the Abis ptional) link. GBFD-110303 Paging CPU usage threshold for recovery from performan ce monitoring. When the average CPU usage of sliding windows is lower than the threshold, performan SET ce FCCPUTHD(Opt monitoring GSM Flow ional) is stopped. GBFD-111705 Control
PMRTHD
Performance monitor restore threshold
BSC6900
PMRTHD
Performance monitor restore threshold
BSC6900
Packet queue usage threshold for recovery from performan ce monitoring. When the packet queue usage of sliding windows is lower than the threshold, performan ce monitoring GSM Flow is stopped. GBFD-111705 Control
PMSW
Performance monitoring flow control switch
BSC6900
PN
Port No.
BSC6900
PN
Port No.
BSC6900
Whether to monitor the RRM SET performan FCSW(Optional) ce GBFD-111705 SET SCUPORT(Opti Number of onal) the port MRFD-210301 SET Port No. of ALMPORT(Man environme datory) nt alarm MRFD-210304
GSM Flow Control Configuration Management Faulty Management
PN
Port No.
BSC6900
Port No. of the XPU board. If you do not specify this parameter, all ports of SET the XPU XPUPORT(Opti board are Configuration onal) queried. MRFD-210301 Management
PN
Port No
BSC6900
Number of the E1/T1 port on the Ater interface board. E1 mode: 0~31 (EIU), 0~62(OIU), 0~251(PO Uc). T1 mode: 0~31(EIU), ADD 0~83(OIU), Ater Interface ATERE1T1(Man 0~335(PO 4:1 datory) Uc). GBFD-111801 Multiplexing ADD AE1T1(Mandato ry) BLK AE1T1(Mandato Port ry) number
PN
Port No
BSC6900
A Interface Circuit GBFD-111803 Management
PN
BM Port No
BSC6900
It is one key field of identifying the block of the Ater timeslot and indicates the port No. of the BLK Ater ATERE1T1(Man interface datory) timeslot. None
None
PN
Port No.
BSC6900
Port number of ADD the E1/T1 PBE1T1(Mandat of the Pb ory) interface GBFD-111203 O&M of BSC
PN
Port No.
BSC6900
Number of the port where the alarm is generated, only the ports for data transmissi on are supported, such as E1/T1 port, channelize d optical port tributary, optical ADD port, and OBJALMSHLD( Ethernet Faulty Mandatory) port MRFD-210304 Management SET MSPCMD(Mand atory) SET MSP(Mandatory ) Indicates the port number for running this command. None
PN
Port No.
BSC6900
None
PN
Port No.
BSC6900
SET E1T1LOP(Optio E1/T1 port nal) number None LOP E1T1(Optional) SET E1T1(Optional)
None
PN
Port No.
BSC6900
E1/T1 port number None
None
PN
Port No.
BSC6900
STR E1T1TST(Optio E1/T1 port nal) number None
None
PN
Port No.
BSC6900
PN
Port No.
BSC6900
Indicates the port number for SET running OPTLOP(Manda this tory) command. None None SWP ETHPORT(Man Port Board datory) number GBFD-111701 Switchover
PN
Port No.
BSC6900
SET OPT(Optional)
Port number
None
None
PN
Port No.
BSC6900
SET COPTLNK(Optio Port nal) number SET ETHPORT(Opti onal) ADD ETHREDPORT( Mandatory) ADD ETHIP(Mandator y) ADD ETHMEP(Mand Ethernet atory) port
None
None
PN
Port No.
BSC6900
None
None
PN
Physics port No.
BSC6900
ADD IPLOGICPORT( FE/GE port Optional) number None STR IPCHK(Optional) STR ETHOAMLOOP Ethernet TST(Mandatory) port STR FRPORTLOOP( Port Optional) number
None
PN
Port No.
BSC6900
PN
Port No.
BSC6900
None
None
PN
Port No.
BSC6900
CHK E1T1CRS(Mand E1/T1 port atory) number None
None
PN
Port No.
BSC6900
ADD BC(Mandatory)
Port number
GBFD-510002 Gb Over FR
PN
Port No.
BSC6900
Port number of ADD Pb PBSL(Mandator signaling y) link GBFD-111203 O&M of BSC Port No. of the BSC6900 board ADD connected BTSAUTOPLAN with the (Mandatory) BTS GBFD-111202 O&M of BTS SET BTSENVALMP ORT(Mandatory) ADD BTSOBJALMSH Alarm port Faulty LD(Mandatory) number MRFD-210304 Management SET BTSFORBIDTS( Mandatory) ADD BTSPPPLNK(M andatory) ADD BTSMPLNK(Ma ndatory) IMP BTSPPPLNK(M andatory) IMP BTSMPLNK(Ma ndatory)
PN
Port No.
BSC6900
PN
Port No.
BSC6900
PN
Port No.
BSC6900
Number of the port on the BTS side GBFD-111202 O&M of BTS
PN
Port No.
BSC6900
Number of SET the port on BTSOMLTS(Ma the BTS ndatory) side GBFD-111202 O&M of BTS Number of the port through which the BTS is ADD connected BTSCONNECT( to the Mandatory) BSC6900 GBFD-111202 O&M of BTS SET BTSETHPORT( Mandatory) IMP Number of BTSDEVIP(Man the FE or datory) GE port GBFD-111202 O&M of BTS
PN
Port No.
BSC6900
PN
Port No.
BSC6900
PN
Port No.
BSC6900
PN
Port No.
BSC6900
POCDELAY
Transmission Delay of POC Service
BSC6900
Number of the Ethernet port. The number must be consistent with that of the port carrying the FE ADD connection BTSETHLCMEP of the IP (Mandatory) BTS. GBFD-111202 O&M of BTS STR BTSTST(Option Port al) number GBFD-111202 O&M of BTS Maximum transmissi on delay of the POC service (push to talk over cellular). The transmissi on delay of the POC service must be relatively small. The network side must support the function of detecting the POC service type and reduce the delay through related processing to meet the SET POC GCELLPSOTHE service RPARA(Optiona requiremen l) t. For the GBFD-119905 PoC QoS
POCGBRMA Max. GBR for X POC Service
BSC6900
Maximum bandwidth of the POC service (push to talk over cellular). The transmissi on delay of the POC service must be relatively small. The network side must support the function of detecting the POC service type and reduce the delay through related processing to meet the POC SET service GCELLPSOTHE requiremen RPARA(Optiona t. For the l) POC GBFD-119905 PoC QoS
POCGBRMI N
Min. GBR for POC Service
BSC6900
Minimum bandwidth of the POC service (push to talk over cellular). The transmissi on delay of the POC service must be relatively small. The network side must support the function of detecting the POC service type and reduce the delay through related processing to meet the POC SET service GCELLPSOTHE requiremen RPARA(Optiona t. For the l) POC GBFD-119905 PoC QoS Whether to support the push to SET talk over GCELLPSOTHE cellular RPARA(Optiona (POC) l) service GBFD-119905 PoC QoS
PocSup
POC Support
BSC6900
Power Output PODECTHR Reduction ES Threshold
BSC6900
This parameter specifies a condition for generating a BTS alarm. When the output power of a TRX of a transmitter is lower than a fixed level, an error is generated. This parameter and "Power output error threshold" indicate the two thresholds of the error. If this SET parameter GCELLOTHEXT is set to a (Optional) large GBFD-111202 O&M of BTS
POERRTHR Power Output ES Error Threshold
BSC6900
This parameter specifies a condition for generating a BTS alarm. When the output power of a TRX of a transmitter is lower than a fixed level, an error is generated. This parameter and "Power output reduction threshold" indicate the two thresholds of the error. If this SET parameter GCELLOTHEXT is set to a (Optional) large GBFD-111202 O&M of BTS Description ADD of the ROLLBACKPOI rollback Configuration NT(Optional) point MRFD-210301 Management BEG ROLLBACK(Ma ndatory) BEG FORWARD(Man datory) ADD ROLLBACKPOI NT(Mandatory)
POINTDESIN Rollback Point FO Description
BSC6900
Rollback Point POINTNAME Name
BSC6900
Name of the rollback point
Port
Destination Port
BSC6900
This port is provided by the FTP server to ADD be visited FTPSCLTDPOR by the FTP T(Mandatory) client. GBFD-111203 O&M of BSC
PORT
Port
BSC6900
Number of the port where to set up the link after the BTS ring is swapped. If this parameter is set to 0, the BTS works on a forward ring. If this parameter is set to 1, the BTS SWP works on a BTSRING(Optio backward nal) ring. GBFD-117801 Ring Topology Number of the port where to set up the link after the main and backup OMLs of SWP the BTS BTSOMLLINK(O are ptional) swapped GBFD-113728 OML Backup ADD Number of DXXCONNECT( the DXX Mandatory) port GBFD-111203 O&M of BSC Maximum number of ports on the DXX GBFD-111203 O&M of BSC
PORT
Port
BSC6900
PORTNO
DXX In Port No.
BSC6900
PORTNUM
DXX Port Number BSC6900
ADD DXX(Optional)
PORTPROT YPE Port protocol type BSC6900
ADD PORTFLOWCT Port RLPARA(Manda protocol tory) type
None
None
PortSwitch
Panel Port Switch BSC6900
Whether to enable the SET panel port XPUPORT(Man of the XPU Configuration datory) board MRFD-210301 Management
PORTTYPE
Port Type
BSC6900
PORTTYPE
Port Type
BSC6900
Indicates the type of the physical port used by the local maintenan ce point in the maintenan ce group. FE indicates the FE port and TRUNK indicates ADD the ETHMEP(Mand aggregatio atory) n group. GBFD-118630 Ethernet OAM Type of the port. If this parameter is set to "TOPEXT OUTPORT ", the local E1/T1 ports are used to extend the transmissi on of other boards. That is, the timeslots on the source E1/T1 port are used by other boards through the extended E1/T1 port. If this parameter is set to "TOPEXTI NPORT", IP-Based the local 2G/3G CoADD E1/T1 Transmission BTSTOPCONFI ports are on Base G(Mandatory) used to MRFD-211501 Station Side
2Quater Message POS2QUATE Transmission R Channel BSC6900
Whether to transmit the 2Quater message on the BCCH Norm channel or SET the BCCH GCELLCCUTRA Ext NSYS(Optional) channel GBFD-114323
2G/3G Cell Reselection Based on MS State
POT
Patch Operation Type
BSC6900
LOD BTSPATCH(Ma ndatory) CON Type of the BTSPATCH(Ma patch ndatory) operation GBFD-111202 O&M of BTS Rated maximum output power of the diesel engine. Refer to the rated output power described on the SET diesel BTSAPMUBP(O engine ptional) label. ADD EMU(Optional) ADD EMU(Optional) ADD EMU(Optional) ADD EMU(Optional) ADD EMU(Optional) ADD EMU(Optional) Relay switch 1 Relay switch 2 Relay switch 3 Relay switch 4 Relay switch 5 Relay switch 6
POWER
Rated Power
BSC6900
GBFD-111202 O&M of BTS Faulty MRFD-210304 Management Faulty MRFD-210304 Management Faulty MRFD-210304 Management Faulty MRFD-210304 Management Faulty MRFD-210304 Management Faulty MRFD-210304 Management
POWER_RE LAY1 Switch for Relay 1 BSC6900 POWER_RE LAY2 Switch for Relay 2 BSC6900 POWER_RE LAY3 Switch for Relay 3 BSC6900 POWER_RE LAY4 Switch for Relay 4 BSC6900 POWER_RE LAY5 Switch for Relay 5 BSC6900 POWER_RE LAY6 Switch for Relay 6 BSC6900
POWERCUR Battery Shunt RENTDIV Coefficient
BSC6900
Battery SET current BTSPMUBP(Opt shunt ional) coefficient GBFD-111202 O&M of BTS Power attenuation level of timeslot 7 of the BCCH in 16QAM. The attenuation level ranges from 0 to 50, with the step of 0.2 dB. When the EDGE TRX sends signals in 16QAM, the transmit power must be lower than SET the mean GCELLBASICP power in Downlink ARA(Optional) GMSK. GBFD-510804 EGPRS2-A
16QAM Transmitter POWERRED Power Reduce UCE16QAM Level
BSC6900
32QAM Transmitter POWERRED Power Reduce UCE32QAM Level
BSC6900
Power attenuation level of timeslot 7 of the BCCH in 32QAM. The attenuation level ranges from 0 to 50, with the step of 0.2 dB. When the EDGE TRX sends signals in 32QAM, the transmit power must be lower than SET the mean GCELLBASICP power in Downlink ARA(Optional) GMSK. GBFD-510804 EGPRS2-A
POWERTYP E Power Type
BSC6900
Power type SET managed BTSPMUBP(Opt by the ional) PMU GBFD-111202 O&M of BTS Type of the power SET supply BTSPOWERTY system of PE(Optional) the cabinet GBFD-111202 O&M of BTS
POWERTYP Cabinet Power E System Type
BSC6900
POWL
Power Level
BSC6900
This parameter specifies the transmit power level of the TRX. The greater this parameter is, the smaller the transmit power is. When this parameter is set to "0", the transmit power level of the TRX is the greatest. Each time this parameter increases by one level, the transmit power SET reduces by GTRXDEV(Opti 2 dB. Configuration onal) For MRFD-210301 Management
POWT
Power Type
BSC6900
This parameter specifies the maximum transmit power supported by the power amplifier of the TRX. The macro BTS and the mini BTS support SET different GTRXDEV(Opti power Configuration onal) levels. MRFD-210301 Management When the number of error frames on the PPP layer reaches the value ADD of this BTSPPPLNK(O parameter, ptional) the frame IMP error alarm BTSPPPLNK(O is Abis IP over ptional) generated. GBFD-118611 E1/T1
PPPEAAT
PPP Frame Error Alarm Threshold BSC6900
PPPEADT
PPP Frame Error Alarm Clearance Threshold BSC6900
When the number of error frames on the PPP layer decreases to the ADD value of BTSPPPLNK(O this ptional) parameter, IMP the frame BTSPPPLNK(O error alarm Abis IP over ptional) is cleared. GBFD-118611 E1/T1 Abis IP over ADD PPP link E1/T1 PPPLNK(Option number of GBFD-118611 A IP over al) BSC. GBFD-118622 E1/T1 ADD MPLNK(Optional ) ADD IPLOGICPORT( Optional) Abis IP over E1/T1 GBFD-118611 A IP over GBFD-118622 E1/T1
PPPLNKN
PPP link No.
BSC6900
PPPLNKN
PPP sub-link No. BSC6900
PPP link number PPP link number
PPPLNKN
PPP link No.
BSC6900
None
None
PPPLNKN
PPP Link No.
BSC6900
ADD BTSPPPLNK(M andatory) ADD BTSMPLNK(Ma ndatory) IMP BTSPPPLNK(M andatory) IMP Number of BTSMPLNK(Ma a BTS Abis IP over ndatory) PPP link. GBFD-118611 E1/T1
PPPMUX
PPP mux
BSC6900
Whether to enable the PPP frame multiplexin g function. If this parameter is set to ENABLE, the PPP frame multiplexin g function is enabled. If this parameter is set to ADD DISABLE, PPPLNK(Option the PPP al) frame Abis IP over ADD multiplexin E1/T1 MPGRP(Optiona g function GBFD-118611 A IP over l) is disabled. GBFD-118622 E1/T1 This parameter applies to the FG2a and GOUa boards. For the FG2c, GOUc, or POUc ADD board, this PORTFLOWCT parameter RLPARA(Option is always al) set to 2. None
PQNUM
Priority queue number
BSC6900
None
Preempted Call Not Released PREEMFOR After Handover HONOTREL Failure
BSC6900
This parameter specifies whether the preempted call is released after the handover failure. If this parameter is set to No, MSs with high priorities can access the network preferential ly, but the preempted call drops; if this parameter is set to Yes, the preempted call is not released. In this case, the access GBFD-115001
PDCH Preemption Allowed During PREEMFOR Handover Due to HOPDCH Preemption BSC6900
This parameter specifies whether to preempt PDCHs when no TCH is available during the handover of the preempted call. When this parameter is set to Yes, the call drop rate of the preempted call is decreased, but the rate of PS services is affected. GBFD-115001
Emergency Call PREEMPTIO Preemption NPERMIT Permitted
BSC6900
If this parameter is set to ON, the BSC initiates a TCHF preemption when receiving a link establishm ent Emergency indication Call Service from an (TS12) SET MS in an Guaranteed GCELLCCAD(O emergency GBFD-110202 Emergency ptional) call. GBFD-110521 Call
PREMRSAM Preprocess MR PLE Sample Ratio
BSC6900
Sampling rate of preSET processed GMRCTRL(Opti measurem onal) ent reports. GBFD-110802
PRI
Route Priority
BSC6900
Priority of a route. A smaller value of this parameter indicates a higher priority. The BTS preferential ly selects ADD the route BTSIPRT(Optio with a high nal) priority to IMP transfer BTSIPRT(Optio information nal) . GBFD-118601 Abis over IP
Packet Access PRIACCTHR Priority
BSC6900
Access priority of the MS that is allowed to access the cell. The MS sends the packet channel request containing the 2-bit radio priority message. The priority of the 2-bit radio priority message ranges from 1 to 4 in descendin g order. During the MS access, the BSC compares System SET the radio Information GCELLPSBASE priority in GBFD-111101 Sending (Optional) the GBFD-114101 GPRS This parameter specifies whether to support flow control based on priority. When this parameter is set to on, the system preferential ly admits SET the calls BSCFCPARA(O initiated by GSM Flow ptional) VIP users. GBFD-111705 Control
PRIFCEN
Support Priority Based Flow Control
BSC6900
PRIMMESPP Transfer Original T MR BSC6900
Whether the BTSs send the original measurem ent reports to the BSC after preprocessing them. When this parameter is set to YES, the BTSs sends the original and preprocessed measurem SET ent reports GCELLHOCTRL to the (Optional) BSC. GBFD-110802
Print control PRINTCTHD threshold
BSC6900
Printing control threshold. If the CPU usage of sliding windows reaches or exceeds the threshold, printing flow control SET is triggered FCCPUTHD(Opt on the GSM Flow ional) serial port. GBFD-111705 Control
Print control PRINTCTHD threshold
BSC6900
Printing control threshold. When the packet queue usage of sliding windows reaches or exceeds the threshold, printing flow control is triggered on the GSM Flow serial port. GBFD-111705 Control
Print restore PRINTRTHD threshold
BSC6900
Printing control threshold. If the CPU usage of sliding windows is lower than the threshold, printing flow control SET on the FCCPUTHD(Opt serial port GSM Flow ional) is stopped. GBFD-111705 Control Printing control threshold. When the packet queue usage of sliding windows is lower than the threshold, printing flow control on the serial port GSM Flow is stopped. GBFD-111705 Control
Print restore PRINTRTHD threshold
BSC6900
PRINTSW
Print Flow control switch BSC6900
Whether to control the printing SET flow on the GSM Flow FCSW(Optional) serial port GBFD-111705 Control
PRIOR
Cell Priority
BSC6900
This parameter controls handover between cells at the same layer. Generally, the cells at the same layer are set with the same priority. If the cells at the same layer have different priorities, a cell with a smaller priority HUAWEI I SET value has Handover GCELLBASICP a higher GBFD-110601 HUAWEI II ARA(Optional) priority. GBFD-510501 Handover
PRIOR
Cell Priority
BSC6900
This parameter controls the handovers among cells on a same layer. A smaller priority value indicates a higher priority. Cells with higher priorities are preferential ly selected as the HUAWEI I ADD handover Handover GEXT2GCELL( target GBFD-110601 HUAWEI II Optional) cells. GBFD-510501 Handover
Flex Abis Prior PRIORABISL Choose Load OADTHRED Thred
BSC6900
If the static Abis resource load is greater than the value of "Fix Abis Prior Choose Abis Load Thred" and the dynamic Abis resource load is greater than the value of this parameter, the halfrate channel is preferred. Otherwise, SET the full-rate BTSFLEXABISP channel is ARA(Optional) preferred. GBFD-117301 Flex Abis Priority of the hierarchica l cell structure (HCS). 0: indicates the lowest priority; 7: SET indicates GCELLSERVPA the highest RA(Optional) priority. GBFD-114101 GPRS
PRIORCLAS Cell HCS Prior S Class
BSC6900
PRIORITY
Route priority
BSC6900
Route priority. A Interface ADD The Protocol MTP3RT(Option highest Process al) priority is GBFD-111804 A over IP ADD represente GBFD-118602 A IP over M3RT(Optional) d by 0. GBFD-118622 E1/T1 Priority of the signaling link. 0 indicates the highest priority. A low-priority ADD link carries A Interface MTP3LNK(Optio services Protocol nal) only when Process ADD the highGBFD-111804 A over IP M3LNK(Optional priority link GBFD-118602 A IP over ) is faulty. GBFD-118622 E1/T1
PRIORITY
Signalling link priority
BSC6900
PRIORITY
Priority
BSC6900
Route priority. The boards FG2a, GOUa, UOIa(IP), FG2c, and GOUc support the configurati on of routes with different priorities. Suppose two or more routes are configured and their addresses and masks are the same, and the addresses of the next hops and priorities. These ADD routes can IPRT(Mandatory be ) configured None
None
Preferential PRIVATEPR Customized OBEFST Detection Type
BSC6900
Preferentia l customized detection type when the customized sequence SET is used for BTSOTHPARA( port Mandatory) detection. GBFD-118601 Abis over IP
Number of PRIVATEPR Customized OBENUM Detection Types
BSC6900
Number of customized detection types involved when the customized sequence SET is used for BTSOTHPARA( port Mandatory) detection. GBFD-118601 Abis over IP
Subsidiary PRIVATEPR Customized OBESND Detection Type Private Key File Name
BSC6900
PrivKey
BSC6900
Subsidiary customized detection type when the customized sequence is used for port detection. This parameter is valid only when Number of Customize d SET Detection BTSOTHPARA( Types is Mandatory) set to 2. GBFD-118601 Abis over IP SET Name of CERTFILE(Opti the private Security onal) key file MRFD-210305 Management Port detection sequence SET used BTSOTHPARA( during BTS Optional) startup. GBFD-118601 Abis over IP
BTS Port Detection PROBESEQ Sequence
BSC6900
PROT
SS7 protocol type BSC6900
Identifies the DSP protocol type, including ITUT(Inter national Telecomm unication Union Telecomm unication Standardiz ation Sector), ANSI(Ame rican National Standards Institute), and TTC(Telec ommunicat ion Technolog ADD y A Interface N7DPC(Optional Committee Protocol ) (Japan)). GBFD-111804 Process Protocol type of the trunk frame. The setting of this parameter must be consistent with the setting at the SGSN side. GBFD-510002 Gb Over FR
PROT
Frame Relay Protocol Type
BSC6900
ADD BC(Optional)
PROTECTD Protection Delay ELAYTIME for Detection
BSC6900
The transmissi on resource in the Abis timeslot is considered as faulty only when the BTS detects that the Abis timeslot is faulty in the delay. The transmissi on resource in the Abis timeslot is considered as normal when the BTS detects the SET Abis BTSABISTROP( timeslot is Optional) normal. GBFD-111202 O&M of BTS
Dyn. Turning Off PROTECTTI Cell Protection ME Time
BSC6900
ProtectTimeT TRX Power-on rxPowerOn Protection Time
BSC6900
This parameter specifies a period of time during which a cell cannot be enabled or disabled to prevent frequent cell enabling or disabling operations. That is, after a cell is enabled, it cannot be disabled within the period of time specified by this parameter; after a cell is disabled, it cannot be enabled SET within the GCELLDYNTUR period of Dynamic Cell NOFF(Optional) time GBFD-111610 Power Off This parameter is set to prevent the BSC from frequently enabling or disabling the TRX. After a TRX is powered on, the BSC is not allowed to disable the TRX within the period of time TRX Power SET specified Amplifier BSCDSTPA(Opt by this Intelligent ional) parameter. GBFD-111602 Shutdown
PS
Port select
BSC6900
SET E1T1(Optional) CHK E1T1CRS(Mand Port atory) selection
None
None
PS
Port select
BSC6900
SET OPT(Optional)
Port selection
None
None
PS
Port select
BSC6900
SET COPTLNK(Man Port datory) selection
None
None
PSCHRABIS PS CHR Abis
BSC6900
This parameter indicates whether to include Abis interface SET messages GPSCHRCTRL( in PS CHR Optional) logs. None This parameter indicates whether to include Gb interface SET messages GPSCHRCTRL( in PS CHR Optional) logs. None
None
PSCHRGB
PS CHR Gb
BSC6900
None
PSCHRINNI NFO
PS CHR Inner Information
BSC6900
This parameter indicates whether to include internal information in PS CHR logs. The internal information is the basic user information , including user type, MS mulitple timeslot capability, cause for TBF abnormal release, SET and GPSCHRCTRL( service Optional) type. None
None
PSCHRINNM PS CHR Inner SG Message
BSC6900
This parameter indicates whether to include internal messages in PS CHR logs. The messages are generated in service data flow and transmitted between internal moudles, including uplink/dow nlink resource request, uplink/dow nlink resource indication, uplink/dow nlink resource SET rejection, GPSCHRCTRL( TS Optional) indication, None This parameter indicates whether to include Um interface SET messages GPSCHRCTRL( in PS CHR Optional) logs. None
None
PSCHRUM
PS CHR Um
BSC6900
None
PSDATADL
GSM PS data service downlink factor
BSC6900
GSM PS data ADD service TRMFACTOR(O downlink ptional) factor
GBFD-118605 IP QOS
PSDATAUL
GSM PS data service uplink factor
BSC6900
GSM PS data ADD service TRMFACTOR(O uplink ptional) factor
GBFD-118605 IP QOS
PSHOSUP
PS Handover Support
BSC6900
ADD NSE(Optional)
Whether to support PS Handover( PS HO). The PS HO is used to reduce the interval of the cell reselection of the MS. GBFD-119502 PS Handover
PSHPRIDAT PS high PRI data APATH path BSC6900
ADD PS high TRMMAP(Optio PRI data nal) path
None
None
PSHPRIDAT PS high PRI data APRI priority BSC6900
ADD PS high TRMMAP(Optio PRI data nal) priority
None
None
PSHPSP
PS High PRI Service PRI
BSC6900
Priority for PS services over the Abis interface in IP, IP over E1, or HDLC mode when PS preferred. When "Level of Preemptin g Dynamic Channel" is set to "No preempt of service TCHF" through the "SET GCELLPS CHM" command, PS services are assigned ADD with a high GCELL(Optional priority. If GSM Flow ) "PS High GBFD-111705 Control
PSI1RPT
PSI1 Repetition Period
BSC6900
Period for sending the packet message PSI. If the period is too long, the message PSI cannot be obtained in realtime. If the period is too short, the message PSI is broadcast frequently, which System occupies Information SET too much Sending GCELLPSI1(Opt system GBFD-111101 Packet System ional) resources. GBFD-119102 Information Whether the BSC supports the state message PSI. The state message SET PSI refers GCELLPSI1(Opt to PSI Packet System ional) STATUS. GBFD-119102 Information
PSISTATUSI Support PSI ND Status Message
BSC6900
PSLPRIDAT PS low PRI data APATH path
BSC6900
ADD PS low TRMMAP(Optio PRI data nal) path
GBFD-118605 IP QOS
PSLPRIDAT PS low PRI data APRI priority
BSC6900
ADD PS low TRMMAP(Optio PRI data nal) priority
GBFD-118605 IP QOS
PSLPSVP
PS Low PRI Service PRI
BSC6900
Priority for PS services over the Abis interface in IP, IP over E1, or HDLC mode when CS preferred. When "Level of Preemptin g Dynamic Channel" is set to "Preempt all dynamic TCHFs" or "No preempt of CCHs" through the "SET GCELLPS CHM" command, CS services ADD are GCELL(Optional assigned GSM Flow ) with a high GBFD-111705 Control Threshold of the receive level for triggering the handover of the PS services from the overlaid subcell to SET the GCELLHOIUO( underlaid Optional) subcell GBFD-113201 Concentric Cell
PSOTOURE PS OtoU HO CEIVETHRS Receive Level H Threshold
BSC6900
PSOUTMOD E Mode Control
BSC6900
This parameter indicates the mode of exporting PS CHR logs. When the parameter is set to "Com mon User Mode&quo t;, the PS CHR logs of a specified cell are exported (the command is "SET GPSCHRS COPE"); when the parameter is set to "Spe cified User Mode&quo SET t;, the PS GPSCHRCTRL( CHR logs Optional) of a None
None
PSRACHAC PS RACH Min. CLEV Access Level
BSC6900
SET GCELLCCACC ESS(Optional)
This parameter specifies the level threshold for the random access of the MS. If the receive level of the RACH burst in the PS domain is smaller than the value of PS RACH Min.Acces s Level, the BTS regards this access as an invalid one and no decoding is performed. If the receive level of the RACH burst is GBFD-111003
PSRACJACC PS Min.Access LEV Level
BSC6900
Minimum voltage level for accessing PS services of ADD the BTSLOCGRP(O location ptional) group GBFD-510104 Multi-site Cell This parameter indicates SET whether to GPSCHRCTRL( record PS Mandatory) CHR logs. None
PSRCDSW
PS CHR Switch
BSC6900
None
PSRESREQ Max PS MSGNUMIN Resource REQ PERIOD Num in Period
BSC6900
Maximum number of messages in the statistical period for the arrival SET of PS BSCFCPARA(O resource GSM Flow ptional) requests GBFD-111705 Control Statistical period for the arrival SET of PS BSCFCPARA(O resource ptional) requests
PSRESREQ PS Resource STATPERIO REQ Statistical D Period
BSC6900
GSM Flow GBFD-111705 Control
PSU0
DPSU 0 Configured
BSC6900
Whether to enable the DPSU0 to supply power for the BTS. In multimode scenario, the value of this parameter in one mode must be the same as the value SET of the BTSAPMUBP(O correspond ptional) ing SET parameter BTSDPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS
PSU1
DPSU 1 Configured
BSC6900
Whether to enable the DPSU1 to supply power for the BTS. In multimode scenario, the value of this parameter in one mode must be the same as the value SET of the BTSAPMUBP(O correspond ptional) ing SET parameter BTSDPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS Whether to enable the DPSU2 to supply power for the BTS. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSAPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS
PSU2
DPSU 2 Configured
BSC6900
PSU2
DPSU 2 Configured
BSC6900
Whether to enable the DPSU2 to supply power for the BTS. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS Whether to enable the DPSU3 to supply power for the BTS. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS
PSU3
DPSU 3 Configured
BSC6900
PSU4
DPSU 4 Configured
BSC6900
PSU5
DPSU 5 Configured
BSC6900
PSU6
DPSU 6 Configured
BSC6900
PSU7
DPSU 7 Configured
BSC6900
PSUTOORE PS UtoO HO CEIVETHRS Receive Level H Threshold
BSC6900
PSUTURNIN GOFFENABL PSU Turning Off E Enable
BSC6900
Threshold of the receive level for triggering the handover of the PS services from the underlaid subcell to SET the GCELLHOIUO( overlaid Optional) subcell GBFD-113201 Concentric Cell This parameter specifies whether the BTS is allowed to enable the PSU Smart Control feature. When this parameter is set to YES, the BTS automatica lly enables or disables the PSU according to the traffic volume to improve the efficiency of the PSU. When this parameter is set to SET NO, the BTSOTHPARA( PSUs of PSU Smart Optional) the BTS GBFD-111608 Control Switch for the selfSET healing of SLFSLVSW(Opt the OMU ional) processes None
PSW
Self-healing Switch for OMU Process
BSC6900
None
PT
Port Type
BSC6900
Port type SET of ALMPORT(Man environme Faulty datory) nt alarm MRFD-210304 Management Number of the port that provides the time information ADD on the SNTPSRVINFO( SNTP Mandatory) server GBFD-111203 O&M of BSC Cell Reselect Penalty Time (PT) is used to ensure the safety and validity of cell reselection because it helps to avoid frequent cell reselection . For details, SET see GSM GCELLIDLEAD( Rec. 05.08 Basic Cell ReOptional) and 04.08. GBFD-110402 selection Subnet protocol type
PT
Port
BSC6900
PT
Cell Reselect Penalty Time
BSC6900
PT
Subnet Protocol Type
BSC6900
PT
Port Type
BSC6900
ADD NSE(Mandatory) SET BTSENVALMP ORT(Optional)
Gb Interface GBFD-119001 Function
Alarm port Faulty type MRFD-210304 Management
PTCODE
Line code
BSC6900
SET E1T1(Optional)
Line coding method
None
None
PTRXT
Frame receive Structure
BSC6900
SET E1T1(Optional)
Receiving frame structure None
None
PTTXT
Frame send Structure
BSC6900
SET E1T1(Optional)
Sending frame structure
None
None
PTTYPE
Frame Structure
BSC6900
SET E1T1(Optional) ADD BTSABISHDLC PATH(Mandator y) ADD BTSBIND2HDL CPATH(Mandat ory) ADD GTRXBIND2HD LCPATH(Manda tory) SET ETHPORT(Man datory)
Frame structure
None
None
PTUID
HDLC Path Index In BTS BSC6900
Number of a BTS HDLC path. It is Abis unique in Transmission one [BTS]. GBFD-118401 Optimization Ethernet port type
PTYPE
Port type
BSC6900
None
None
PTYPE
Power System Type
BSC6900
Power system type. When the PMU is installed on the rack, you can select the custom power system type. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSAPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS Name of SET the CERTFILE(Opti certificate onal) file
PubCert
Certificate File Name
BSC6900
PV
BTS Patch Version
BSC6900
This parameter specifies the patch version loaded to the BTS. This parameter can be set to only a hot patch version. You can use either of the following methods to query the version number of the BTS hot patch. Method 1: If the BTS hot patch is downloade d to the OMU SET through the BTSAUTODLDA MML CTINFO(Option command al) DLD GBFD-111202 O&M of BTS LOD BTSPATCH(Ma ndatory) CON Number of BTSPATCH(Ma the patch ndatory) version GBFD-111202 O&M of BTS
PV
Patch Version
BSC6900
PVC Utilization PVCUSERAT Report Period ETIMER Timer Private Key Password
BSC6900
PWD
BSC6900
Period timer of PVC utilization report. This timer is started during initializatio n. When the timer expires, the PVC SET utilization BSCPSSOFTPA information RA(Optional) is reported. GBFD-510002 Gb Over FR SET CERTFILE(Man Private key Security datory) password MRFD-210305 Management ADD OP(Mandatory) DLD LICENSE(Mand atory) ULD LICENSE(Mand atory) Password DLD RETANTCFG(M andatory) ULD BTSDEVFILE(M andatory) DLD BTSPATCH(Ma ndatory) ULD BTSLOG(Manda tory) DLD BTSSW(Mandat ory) SET PWDPOLICY(O ptional) STR BTSTST(Manda tory)
PWD
Password
BSC6900
O&M of BSC GBFD-111203 Security MRFD-210305 Management
PWD
User Password
BSC6900
User password for the FTP server. When the FTPServer .exe file downloade d through the LMT is installed, the user password is admin. GBFD-111202 O&M of BTS Minimum length of the user password Power level
PwdMinLen
Minimum Password Length BSC6900
PWL
Power Level
BSC6900
PWRALMSS W1 First Alarm Switch BSC6900
First alarm switch of power SET distribution PWRALMSW(O monitoring Faulty ptional) board MRFD-210304 Management Second alarm switch of power SET distribution PWRALMSW(O monitoring ptional) board MRFD-210304 Whether to allow active power control. If this parameter is set to YES, the system performs power forecast in the process of initial access assignmen t or service channel activation during intraBSC handovers, and sends the forecast initial power information to the SET BTSs GCELLPWRBA through SIC(Optional) channel GBFD-117602
PWRALMSS Second Alarm W2 Switch
BSC6900
Faulty Management
PWRBCDAL Power Forecast LOWD Allowed
BSC6900
Active Power Control
PWRCTRLO III Power Control PTIMIZEDEN Optimized Enable BSC6900
Whether to enable the optimized power SET control HUAWEI III GCELLPWR3(O algorithm Power Control ptional) III GBFD-117601 Algorithm Whether to enable power control algorithm II or power SET control Enhanced GCELLPWRBA algorithm Power Control SIC(Optional) III GBFD-110703 Algorithm If a class 3 MS on the DCS1800 band does not receive the original power command after random access, the power that the MS uses is the MS maximum transmit power level plus the power calculated from the power deviation. For details, see GSM Rec. 05.08. GBFD-111003
PWRCTRLS Power Control W Switch
BSC6900
PWRDIV
Power Deviation
BSC6900
Power Deviation PWRDIVIND Indication
BSC6900
The MS does not receive the original power command after random access. This parameter indicates whether the power deviation is added to the class 3 MS on the DCS1800 band on the basis of the maximum MS transmit power. GBFD-111003
PWRLOCATI Location Group ON Power Switch
BSC6900
Whether to enable the power amplifier for all location groups. 0x01 indicates that the TRX power amplifier is enabled for all location groups. 0x00 indicates that the TRX power amplifier is enabled for SET the current GCELLSOFT(O location ptional) group. GBFD-510104 Multi-site Cell
PWRMODE
Power Class
BSC6900
ADD BTSBRDCAP(M andatory) ADD BTSRXUBRD(O Power ptional) mode.
PWROFFPR OTECTSTAR Power-off Protect TTIME Start Time BSC6900
Time interval between the time when the BTS detects that the external power supply is shut down and the time when the backup power decrease function is started. This parameter is valid in the BTSs that supports the backup SET power BTSBAKPWR(O decrease Active Backup ptional) function. GBFD-111605 Power Control
PWRPRIOR Power Priority ALLOW Allowed
BSC6900
When this parameter is set to YES, The BSC6900 preferential ly uses the TRX with good powersaving performan ce according to the TRX power priority reported by the BTS. Smaller priority value indicates better power saving quality. If the priority is of a great value, the SET BTS GCELLCHMGA closes D(Optional) TRXs late. GBFD-111005
PWRSPNR
Power Finetune
BSC6900
Finetune of the TRX power. During the static finetune of the TRX power, the BSC adjusts the TRX power at a step of 0.2 dB. In some scenarios, the losses vary depending on the tributaries where the power is combined, and the power difference before and after the power output is not an SET integral GTRXDEV(Opti multiple of Configuration onal) 2 dB. As a MRFD-210301 Management When the ANT_A tributary antenna power switch is ON, it is allowed to configure O&M of BTS related Connection parameters with TMA SET of the (Tower BTSRXUBP(Opt ANT_A GBFD-111202 Mounted ional) tributary. MRFD-210601 Amplifier)
PwrSwitchA
ANT_A ALD Power Switch
BSC6900
PwrSwitchB
ANT_B ALD Power Switch
BSC6900
When the ANT_B tributary antenna power switch is ON, it is allowed to configure O&M of BTS related Connection parameters with TMA SET of the (Tower BTSRXUBP(Opt ANT_B GBFD-111202 Mounted ional) tributary. MRFD-210601 Amplifier) When the RET tributary antenna power switch is ON, it is allowed to configure related SET parameters BTSRXUBP(Opt of the RET ional) tributary. GBFD-111202 O&M of BTS Minimum DSCP of queue 0. The IP packets with DSCP in a relation that "Min DSCP of queue 0" <= DSCP SET <= 63 is QUEUEMAP(Op added to tional) queue 0. None
PwrSwitchRE RET ALD Power T Switch
BSC6900
Min DSCP of Q0MINDSCP queue 0
BSC6900
None
BSC6900
Minimum DSCP of queue 1. The IP packets with DSCP in a relation that "Min DSCP of queue 1" <= DSCP < "Min DSCP of SET queue 0" is QUEUEMAP(Op added to tional) queue 1. None Minimum DSCP of queue 2. The IP packets with DSCP in a relation that "Min DSCP of queue 2" <= DSCP < "Min DSCP of SET queue 1" is QUEUEMAP(Op added to tional) queue 2. None Minimum DSCP of queue 3. The IP packets with DSCP in a relation that "Min DSCP of queue 3" <= DSCP < "Min DSCP of SET queue 2" is QUEUEMAP(Op added to tional) queue 3. None
None
BSC6900
None
BSC6900
None
BSC6900
Minimum DSCP of queue 4. The IP packets with DSCP in a relation that "Min DSCP of queue 4" <= DSCP < "Min DSCP of queue 3" is added to queue 4. The IP packets with DSCP in a relation that 0 <= DSCP < "Min DSCP SET of queue QUEUEMAP(Op 4" is added tional) to queue 5. None
None
QCI
Qsearch C Initial
BSC6900
This parameter specifies the threshold of the signal level for cell reselection in connection mode GSM/WCDMA before Interoperability SET ""Qsearch GSM/TDGCELLCCUTRA C"" is GBFD-114301 SCDMA NSYS(Optional) obtained. GBFD-114302 Interoperability
QCKMVHOE MS Fast Moving N HO Allowed
BSC6900
Whether to enable the fast moving micro-cell handover algorithm. The fast moving micro-cell handover algorithm enables fast moving MSs to switch over to macrocells, thus reducing HUAWEI I SET the Handover GCELLHOBASI handover GBFD-110601 HUAWEI II C(Optional) times. GBFD-510501 Handover This parameter is used in the P/N criteria decision: If an MS quickly passes through N out of P micro-cells lately, the BSC enables the fast moving micro-cell handover algorithm. This parameter correspond HUAWEI I SET s to the N Handover GCELLHOAD(O in the P/N GBFD-110601 HUAWEI II ptional) criteria. GBFD-510501 Handover
QCKSTATC NT
MS Fast-moving Watch Cells
BSC6900
MS Fast-moving QCKTIMETH Time Threshold
BSC6900
A time threshold determined based on the radius of a cell and the moving speed of an MS. If the MS crosses the cell in a time period shorter than this threshold, the BSC concludes that the MS quickly passes through the cell. Otherwise, it concludes that the HUAWEI I SET MS slowly Handover GCELLHOAD(O passes the GBFD-110601 HUAWEI II ptional) cell. GBFD-510501 Handover
QCKTRUEC MS Fast-moving NT Valid Cells
BSC6900
This parameter is used in the P/N criteria decision: If an MS quickly passes through N out of P micro-cells lately, the BSC enables the fast moving micro-cell handover algorithm. This parameter correspond HUAWEI I SET s to the P Handover GCELLHOAD(O in the P/N GBFD-110601 HUAWEI II ptional) criteria. GBFD-510501 Handover
QI
Qsearch I
BSC6900
This parameter specifies the level threshold for cell reselection in idle mode. In idle mode, if the signal level of the serving cell is below [0, 7] or above [8, 15], the MS starts to search for 3G cells. For example, if this parameter is set to 5 and if the signal level of the serving cell is lower GSM/WCDMA than 5, the Interoperability SET MS starts GSM/TDGCELLCCUTRA to search GBFD-114301 SCDMA NSYS(Optional) for 3G GBFD-114302 Interoperability
QLENSD
Filter Length for TCH Qual.
BSC6900
For the purpose of accurately reflecting the radio environme nt of a network, filtering is performed on the measured values in several consecutiv e measurem ent reports. This parameter indicates the number of measurem ent reports used for the filtering of the signal quality on service or HUAWEI I SET data Handover GCELLCHMGA channels. GBFD-110601 HUAWEI II D(Optional) This GBFD-510501 Handover
QLENSI
Filter Length for SDCCH Qual.
BSC6900
For the purpose of accurately reflecting the radio environme nt of a network, filtering is performed on the measured values in several consecutiv e measurem ent reports. This parameter indicates the number of measurem ent reports used for the filtering of the signal quality on signaling HUAWEI I SET channels. Handover GCELLCHMGA This GBFD-110601 HUAWEI II D(Optional) parameter GBFD-510501 Handover
QOSOPT
Support QoS Optimize
BSC6900
Whether to support QoC optimizatio n. The GSN equipment for the GPRS provides flexible QoS mechanis ms for different subscriber s. The QoS level is also set during subscriptio n. The QoS control parameters include: service priority, reliability level, delay SET level, and GCELLPSOTHE data RPARA(Optiona throughput QoS l) level. GBFD-119902 ARP&THP
QP
Qsearch P
BSC6900
This parameter specifies one threshold of the signal level for cell reselection in packet transfer mode. In packet transfer mode, if the signal level of the serving cell is below [0, 7] or above [8, 15], the MS starts to search for 3G cells. For example, if this parameter is set to 5 and if the GSM/WCDMA signal level Interoperability SET of the GSM/TDGCELLCCUTRA serving cell GBFD-114301 SCDMA NSYS(Optional) is lower GBFD-114302 Interoperability
QSEARCHC Qsearch C
BSC6900
In connection mode, if the signal level is below [0-7] or above [815], the MS starts to search for 3G cells. For example, if this parameter is set to 5 and if the signal level of the serving cell is lower than 5, the MS starts to search for 3G cells; if this parameter is set to 10 and if the signal level of the SET serving cell GCELLCCUTRA is above GBFD-114301 NSYS(Optional) 10, then GBFD-114302
GSM/WCDMA Interoperability GSM/TDSCDMA Interoperability
QTRUCHAN QTRU Signal MANGSWIT Merge Avoid CH Switch
BSC6900
This parameter is used to avoid allocating the calls whose signal strengths differ greatly to the same timeslot. The BSC measures the signal merge conditions on each timeslot every 0.5 seconds. If the difference between the highest signal strength and the lowest signal HUAWEI I SET strength on Handover GCELLSOFT(O a timeslot GBFD-110601 HUAWEI II ptional) is greater GBFD-510501 Handover
Qtru Down Power QTRUDNPW Inadequate Last RLASTTIME Time BSC6900
The P/N criteria is used to determine low downlink power for multidensity carriers. If the downlink power of a multidensity carrier remains low during a consecutiv eP seconds out of N seconds, the downlink power of the multidensity carrier is considered HUAWEI I SET low. This Handover GCELLCHMGA parameter GBFD-110601 HUAWEI II D(Optional) correspond GBFD-510501 Handover
Qtru Down Power QTRUDNPW Inadequate Stat RSTATTIME Time BSC6900
The P/N criteria is used to determine low downlink power for multidensity carriers. If the downlink power of a multidensity carrier remains low during a consecutiv eP seconds out of N seconds, the downlink power of the multidensity carrier is considered HUAWEI I SET low. This Handover GCELLCHMGA parameter GBFD-110601 HUAWEI II D(Optional) correspond GBFD-510501 Handover Whether to use the statistical multiplexin g algorithm SET for multiGCELLCHMGA density D(Optional) power GBFD-111005
QTRUPWRS Multi-Density TRX HARE Power Sharing BSC6900
QUALOFFTI Qualified Times MES for Off
BSC6900
Maximum number of times that the BTS finds that the air conditioner needs to be switched off. If the number of times that the BTS finds that the air conditioner needs to be switched off in the "CHKOFF TIMES" checks reaches this parameter, the BTS switches SET off the air BTSAIRCON(O conditioner ptional) . GBFD-111202 O&M of BTS
QUALONTIM Qualified Times ES for On
BSC6900
Maximum number of times that the BTS finds that the air conditioner needs to be switched on. If the number of times that the BTS finds that the air conditioner needs to be switched on in the "CHKONTI MES" checks reaches this parameter, the BTS switches SET on the air BTSAIRCON(O conditioner ptional) . GBFD-111202 O&M of BTS Step of downward power adjustment according to the quality of SET the Enhanced GCELLPWR2(O received Power Control ptional) signals GBFD-110703 Algorithm Whether to query the classmark of the call in an HUAWEI I SET incoming Handover GCELLSOFT(O BSC GBFD-110601 HUAWEI II ptional) handover GBFD-510501 Handover
QUALSTEP
MAX Down Adj. PC Value by Qual.
BSC6900
QUERYCMA Query Classmark FTERINBSC after In-BSC HO HO Enabled BSC6900
Quick Handover QUICKHOEN Enable
BSC6900
R0AuxDev
SubRack0 Auxiliary Equipment
BSC6900
Whether to allow the SET fast GCELLHOBASI handover Fast Move C(Optional) algorithm GBFD-510102 Handover Auxiliary devices of rack 0. This parameter contains eight bits. The eight bits, from the most significant bit to the least significant bit, indicate whether to install a voltage stabilizer, internal battery, transmissi on power supply, temperatur e control unit, auxiliary device 5, auxiliary SET device 6, BTSAUXEQP(O auxiliary ptional) device 7, GBFD-111202 O&M of BTS
R0BatAllow
SubRack0 Storage Battery Config Permit
BSC6900
Whether to configure a SET battery BTSBAT(Option rack for al) rack 0 GBFD-111202 O&M of BTS
R0BatCap
SubRack0 Storage Battery Capacity
BSC6900
Capacity of the battery SET rack BTSBAT(Manda configured tory) for rack 0 GBFD-111202 O&M of BTS Ratio of the maximum charging current of the battery pack configured for rack 0 to the capacity of the battery pack. For example, assume that the battery pack has a capacity of 200 AH. If this parameter is set to 0.15C, the maximum charging current of the battery SET pack is 30 BTSBAT(Manda A (= 0.15 x tory) 200). GBFD-111202 O&M of BTS
R0BatCoeff
SubRack0 Storage Battery Coefficient
BSC6900
R0BatType
SubRack0 Storage Battery Type
BSC6900
R1AuxDev
BSC6900
Type of the battery SET rack BTSBAT(Manda configured tory) for rack 0 GBFD-111202 O&M of BTS Auxiliary devices of rack 1. This parameter contains eight bits. The eight bits, from the most significant bit to the least significant bit, indicate whether to install a voltage stabilizer, internal battery, transmissi on power supply, temperatur e control unit, auxiliary device 5, auxiliary SET device 6, BTSAUXEQP(O auxiliary ptional) device 7, GBFD-111202 O&M of BTS
R1BatAllow
BSC6900
R1BatCap
BSC6900
R1BatCoeff
BSC6900
R1BatType
BSC6900
R2AuxDev
BSC6900
Type of the battery SET rack BTSBAT(Manda configured tory) for rack 1 GBFD-111202 O&M of BTS Auxiliary devices of rack 2. This parameter contains eight bits. The eight bits, from the most significant bit to the least significant bit, indicate whether to install a voltage stabilizer, internal battery, transmissi on power supply, temperatur e control unit, auxiliary device 5, auxiliary SET device 6, BTSAUXEQP(O auxiliary ptional) device 7, GBFD-111202 O&M of BTS
R2BatAllow
BSC6900
R2BatCap
BSC6900
R2BatCoeff
BSC6900
R2BatType
BSC6900
Type of the battery SET rack BTSBAT(Manda configured tory) for rack 2 GBFD-111202 O&M of BTS The NS performs location manageme nt based on routing areas during GPRS packet services. Each routing area has a routing area identifier, which is broadcast ADD as a GEXT2GCELL( system Configuration Optional) message. MRFD-210301 Management The NS performs location manageme nt based on routing areas during GPRS packet services. Each routing area has a ADD routing GEXT3GCELL( area Configuration Optional) identifier. MRFD-210301 Management Identifies SET the routing GCELLGPRS(O area of the ptional) current cell GBFD-114101 GPRS
RA
RAC
BSC6900
RA
Route Area
BSC6900
RA
Routing Area
BSC6900
RA
Route Area
BSC6900
Compact BTS SET Route area Automatic BTSAUTOPLAN of the Configuration CFG(Optional) current cell GBFD-510701 and Planning Compact BTS Automatic ADD Route area Configuration GCELLQUICKS of the GBFD-510701 and Planning ETUP(Optional) current cell Compact BTS SET Route area Automatic BTSAUTOPLAN of the Capacity CFG(Optional) current cell GBFD-510702 Planning This parameter specifies the level threshold for the random access of the MS. If the receive level of the RACH burst in the CS domain is smaller than the value of CS RACH Min.Acces s Level, the BTS regards this access as an invalid one and no decoding is performed. If the receive Radio SET level of the Common GCELLCCACC RACH Channel ESS(Optional) burst is GBFD-111003 Management
RA
Route Area
BSC6900
RA1
Route Area
BSC6900
RACHACCL EV
CS RACH Min. Access Level
BSC6900
RACHBUSY RACH Busy THRED Threshold
BSC6900
Level threshold of the MS random access for the BTS to determine the RACH busy state. When the receive level of the random access burst timeslot is greater than this threshold, the BTS considers SET that the GCELLCCBASI timeslot is C(Optional) busy. GBFD-111003
Average RACH RACHLDAVE Load Timeslot RSLOT Number
BSC6900
Number of RACH burst timeslots in a RACH load measurem ent. The value of this parameter indicates the interval during which the BSC6900 determines whether an RACH timeslot is busy. For details, SET see GSM GCELLCCCH(O Rec. ptional) 08.58. GBFD-111003
RACJACCLE CS Min.Access V Level
BSC6900
Minimum voltage level for accessing CS services of ADD the BTSLOCGRP(O location ptional) group GBFD-510104 Multi-site Cell Routing System SET area color Information GCELLPSBASE code of the GBFD-111101 Sending (Optional) GPRS cell GBFD-114101 GPRS Whether to allow the SET MS to GCELLRESELE access CTPARA(Option another al) cell GBFD-114101 GPRS
RACOLOR
Routing Area Color Code
BSC6900
Allow MS to RANDACCE Access to SSRETRY Another Cell
BSC6900
RANERRTH Random Access RED Error Threshold
BSC6900
Correlation threshold of the training sequence for the random access. As defined in the GSM recommen dation, the system can determine whether the received signals are random access signals of the MS and calculate the TA value by checking the correlation of the 41bit training sequence. Random Access GBFD-111003
Accessorial RARESELEC Hysteresis of Cell THYST Selection BSC6900
Hysteresis of cell selection in different routing area. When a standby or ready MS starts cell reselection , if the original cell and the target cell are in the different routing area, the signal level of the neighborin g cell must be greater that of the current cell. Their difference must be larger than SET the GCELLRESELE specified CTPARA(Option hysteresis. al) Otherwise GBFD-114101 GPRS Port rate of SET the IP BTSETHPORT( interface Optional) board GBFD-118601 Abis over IP
RATE
Rate
BSC6900
RATECTRLS AMR Rate W Control Switch
BSC6900
Switch for controlling the AMR rate. Value 0 indicates that C/I is used to control the AMR rate. Value 1 indicates AMR Coding that BER is Rate Threshold SET used to Adaptive GCELLCCAMR( control the GBFD-115506 Adjustment Optional) AMR rate. GBFD-115507 WB AMR
RATSCCHE Is RATSCCH NABLED Function Enabled BSC6900
This parameter specifies whether the RATSCCH function is enabled during the call establishm ent procedure. RATSCCH is used to dynamicall y reconfigure the rate set of AMR while on a call. This parameter AMR Coding maps the Rate Threshold SET versions of Adaptive GCELLCCAMR( base GBFD-115506 Adjustment Optional) stations. GBFD-115701 TFO Original measurem ent report sampling rate (for each call, one out of four measurem SET ent reports Processing of GMRCTRL(Opti is Measurement onal) collected) GBFD-110801 Report
RAWMRSAM Raw MR Sample PLE Ratio BSC6900
RBPTYPE
Type of Rollback Point BSC6900
LASTRBP indicates the last rollback point. The system automatica lly takes the position where the current configurati on command is executed as the rollback point, and the user does not need to specify a rollback point. APPOINT RBP indicates the rollback point BEG specified FORWARD(Man by the Configuration datory) user. MRFD-210301 Management
RCDT
Result Recording Type BSC6900
Type of recording the execution result 1. REC_ALL: indicating that the execution results of all the commands are recorded no matter whether the commands are executed successfull y. 2. REC_ERR : indicating that only the execution results of failed RUN commands BATCHFILE(Opt are ional) recorded. GBFD-111203 O&M of BSC
RCN
Chain No.
BSC6900
Number of the RXU chain or ring. The value scope is 0~11 for NonSingleRAN BTS and 0~249 for SingleRAN BTS. The RXU chain No. is unique in ADD the same BTSRXUCHAIN BTS. A (Mandatory) maximum SET of 12 RXU BTSBREAKPOI chains can NT(Mandatory) be SPT configured BTSRXUCHAIN in one (Mandatory) BTS. GBFD-111202 O&M of BTS The first RXU chain number when combining two RXU CBN chains to BTSRXUCHAIN be one (Mandatory) RXU ring. GBFD-111202 O&M of BTS The second RXU chain number when combining two RXU CBN chains to BTSRXUCHAIN be one (Mandatory) RXU ring. GBFD-111202 O&M of BTS
RCN1
First RXU Chain No.
BSC6900
RCN2
Second RXU Chain No.
BSC6900
RCVMD
Receive Mode
BSC6900
RF receive mode of the TRX. The BTS3012, BTS3012A E, BTS3012II, BTS3006C , and BTS3002E do not support Main Diversity. The DBS3900 GSM and BTS3900 GSM support Four Diversity SET Receiver GTRXDEV(Opti and Main Configuration onal) Diversity. MRFD-210301 Management Speed reduction efficient of the logical port. When detecting link congestion through IPPM, the system reduces the bandwidth rate of the logical port by using the value of the bandwidth ADD multiplied IPLOGICPORT( by this Optional) parameter. GBFD-118605 IP QOS
RDC
Rate down coefficient [%]
BSC6900
REASSEN
Allow Reassign
BSC6900
Whether to allow the SET reassignm GCELLCCBASI ent TCH ReC(Optional) function GBFD-112501 assignment
REASSFRE QBAND
Frequency Band of Reassign
BSC6900
Whether to re-assign the radio channels on a different band or on the same band. This can help minimize the decrease in service quality due to interferenc e, faulty TRX paths, or faulty SET project GCELLCCAD(O constructio TCH Reptional) ns. GBFD-112501 assignment IUO cell receive quality threshold (AMRFR), which is used for SET IUO GCELLHOIUO( handover GBFD-113201 Concentric Cell Optional) decision GBFD-115501 AMR FR
RECEIVEQU ALTHRSHA ReceiveQualThrs MRFR hAMRFR BSC6900
RECEIVEQU ALTHRSHA ReceiveQualThrs MRHR hAMRHR BSC6900
IUO cell receive quality threshold (AMRHR), which is used for SET IUO GCELLHOIUO( handover GBFD-113201 Concentric Cell Optional) decision One of the GBFD-115502 AMR HR parameters that decide the underlay and overlay areas. The underlay and overlay areas are determined by "RX_QUAL Threshold" , "RX_LEV Threshold" , "RX_LEV Hysteresis" , "TA Threshold" SET , and "TA GCELLHOIUO( Hysteresis" Optional) together. GBFD-113201 Concentric Cell
RECLEVHYS RX_LEV T Hysteresis
BSC6900
RECLEVTHR RX_LEV ES Threshold
BSC6900
One of the parameters that decide the underlay and overlay areas. The underlay and overlay areas are determined by "RX_QUAL Threshold" , "RX_LEV Threshold" , "RX_LEV Hysteresis" , "TA Threshold" SET , and "TA GCELLHOIUO( Hysteresis" Optional) together. GBFD-113201 Concentric Cell Whether to use the downlink receive level as a condition SET in IUO GCELLHOIUO( handover Optional) decision GBFD-113201 Concentric Cell
RECLEVUO HOALLOW
RX_LEV for UO HO Allowed
BSC6900
RecordDiscar dedPagingInf Record Discarded oFlag Paging Msg BSC6900
With traffic control enabled, the BSC discards some paging messages. This parameter specifies whether to record detailed information of paging messages discarded by the BSC in the commissio GSM Flow ning logs. GBFD-111705 Control
Decrease rate RECOVERT alarm recover HD threshold
BSC6900
Speed reduction ADD alarm IPLOGICPORT( recovery Optional) threshold
GBFD-118605 IP QOS
RECQUALT H
RX_QUAL Threshold
BSC6900
One of the parameters that decide the underlay and overlay areas. If "Enhanced Concentric Allowed" is set to OFF, the underlay and overlay areas are determined by "RX_QUAL Threshold" , "RX_LEV Threshold" , "RX_LEV Hysteresis" , "TA Threshold" , and "TA Hysteresis" together; if SET "Enhanced GCELLHOIUO( Concentric Optional) Allowed" is GBFD-113201 Concentric Cell Whether to use the downlink receive quality as a condition SET in IUO GCELLHOIUO( handover Optional) decision GBFD-113201 Concentric Cell Whether to back up ADD the data of Configuration BRD(Mandatory) the board MRFD-210301 Management Interval for releasing the secondary SET links in the BSCPSSOFTPA congestion GSM Flow RA(Optional) state GBFD-111705 Control
RECQUALU RX_QUAL for OHOALLOW UO HO Allowed
BSC6900
RED
Backup
BSC6900
Interval to Reduce Transmission ReduceTrans Bandwidth when BwInt Congested
BSC6900
Number of Transmission Bandwidth to ReduceTrans Reduce when BwNum Congested
BSC6900
Secondary link bandwidth that is released each time SET in the BSCPSSOFTPA congestion GSM Flow RA(Optional) state GBFD-111705 Control Port for output LINE2(The actual value range may differ on BSC/RNC the LMT ) MRFD-210502 Clock Back-up port for output LINE2(The actual value range may differ on BSC/RNC the LMT ) MRFD-210502 Clock Port for output LINE1(The actual value range may differ on BSC/RNC the LMT ) MRFD-210502 Clock Back-up port for output LINE(The actual value range may differ on BSC/RNC the LMT ) MRFD-210502 Clock Switch of panel BSC/RNC BITS1(2M) MRFD-210502 Clock Switch of panel BSC/RNC BITS2(2M) MRFD-210502 Clock
REF2MCLK2 SRC Port for LINE2
BSC6900
SET CLK(Optional)
REF2MCLK2 Back-up port for SRCBAK LINE2
BSC6900
SET CLK(Optional)
REF2MCLKS RC Port for LINE1
BSC6900
SET CLK(Optional)
REF2MCLKS Back-up port for RCBAK LINE1 REF2MCLKS Switch of panel W1 2M BITS1 REF2MCLKS Switch of panel W2 2M BITS2
BSC6900
SET CLK(Optional) SET CLK(Optional) SET CLK(Optional)
BSC6900
BSC6900
REFUSELOC Use SGSN clock ALCLK source BSC6900
SET CLK(Optional)
Whether to use SGSN clock source.Onl y the Gb interface board needs to set this parameter. If the SGSN clock and the MSC clock have different clock sources, the MSC clock must use the clock source of the SGSN clock. If the two clocks use the same clock source, this parameter does not BSC/RNC need to be MRFD-210502 Clock
REGION
Region Information
BSC6900
Region information of the IP BTS configured with local switching. Local switching can be performed between only the BTSs that have the same SET region BTSLSW(Option information BTS Local al) . GBFD-117702 Switch
REHOSTAB ReHost Absolute STIME Time BSC6900
SET GREDGRPPRI Absolute MHOSTPOLICY time of reBSC Node (Mandatory) homing GBFD-113725 Redundancy SET GREDGRPPRI Delay time MHOSTPOLICY of reBSC Node (Mandatory) homing GBFD-113725 Redundancy
REHOSTDEL ReHostDelayTim AYTIME e BSC6900
REHOSTTYP E ReHost Type
BSC6900
SET GREDGRPPRI Policy type MHOSTPOLICY of reBSC Node (Mandatory) homing GBFD-113725 Redundancy Whether to re-initialize the neighborin g cell pair for ADD software SoftAISSCFG(Mand synchroniz Synchronized atory) ation GBFD-118201 Network Cabinet number of the associated module. The associated two MRFUs or GRFUs SET must be in BTSRXUBP(Ma the same ndatory) cell. GBFD-111202 O&M of BTS
REINITTBL
Reinitialize Neighbour Cell Table
BSC6900
Associated Board RELATEDCN CN BSC6900
Extend Connection RELATEDFC Configuration UENABLED Enabled
BSC6900
Whether to enable the configurati on of the "Extend Connectio n" attribute. The "Extend Connectio n" attribute describes the cascading relationshi p of the DFCB, which helps the DFCU perform SET the six-inBTSDFCUBP(O one ptional) function. GBFD-111202 O&M of BTS
RELATEDM ODFUNC
Associated Board Function BSC6900
Function to be performed SET by two BTSRXUBP(Opt associated ional) modules GBFD-111202 O&M of BTS Slot number of SET the BTSRXUBP(Ma associated ndatory) module GBFD-111202 O&M of BTS Subrack number of SET the BTSRXUBP(Ma associated ndatory) module GBFD-111202 O&M of BTS
Associated Board RELATEDSN SN BSC6900
RELATEDSR Associated Board N SRN BSC6900
RELATEDTR Cascading ACK Tributary
BSC6900
Tributary Number of the DFCB that is cascaded to the DFCU. The "Extend Connectio n" attribute describes the cascading relationshi p of the DFCB, which helps the DFCU perform SET the six-inBTSDFCUBP(O one ptional) function. GBFD-111202 O&M of BTS ADD TRMMAP(Optio nal) ADD TRMFACTOR(M andatory) Remark GBFD-118605 IP QOS Purpose description ADD of the IPRT(Mandatory route ) record None None Remote ADD NSVL ID of NSVLREMOTE( the Gb IP Mandatory) route GBFD-118603 Gb over IP
REMARK
Remark
BSC6900
REMARK
Route use description
BSC6900
REMOTENS VLI Remote NSVL ID BSC6900
REP
Repeat
BSC6900
A key parameter that indicates how many times the BSC6900 broadcasts cell messages. You can obtain the cell broadcast times by running the "DSP GSMSCB" command. ADD The value GSMSCB(Mand 0 indicates Simplified Cell atory) no repeat. GBFD-113602 Broadcast When the cell supports Repeated Downlink FACCH, the BTS enables the repeated transmissi on of FACCH frames if the measured downlink quality is higher than "Repeated Downlink SET FACCH Robust Air GCELLCCBASI Threshold" Interface C(Optional) . GBFD-113721 Signalling
REPEATDLF Repeated ASET Downlink FACCH BSC6900
Repeated REPEATDLF Downlink FACCH ATHRED Threshold BSC6900
If the cell supports the Repeated Downlink FACCH function and the measured downlink quality is lower than the downlink quality threshold, the BTS enables the repeated transmissi SET on of Robust Air GCELLCCBASI FACCH Interface C(Optional) frames. GBFD-113721 Signalling When the cell supports Repeated Downlink SACCH, the BTS enables the repeated transmissi on of SACCH frames if the measured downlink quality is higher than the SET downlink Robust Air GCELLCCBASI quality Interface C(Optional) threshold. GBFD-113721 Signalling Whether to reserve the binding of the alarm ID and the Faulty alarm port MRFD-210304 Management
REPEATSAS Repeated ET SACCH
BSC6900
RESALMID
Reserved Alarm ID.
BSC6900
ResCheckAll ResCheckAllowe owed d BSC6900
Whether to perform resource checks on the resource usage system and resource manageme nt system. Resource checks can prevent resource hanging in case of anomalies. Resource checks cover channel resources, transmit resources, and BSC resources. GBFD-111203 O&M of BSC
Cell Reselection RESELHYST Hysteresis
BSC6900
Indicating that during cell reselection , the level of the target cell should meet the following condition: Level of target cell > [MAX (level of serving cell, "Cell Reselectio n Level Threshold" ) + "Cell Reselectio n Hysteresis" ]. In this way, pingpong SET handovers GCELLNC2PAR do not A(Optional) occur. GBFD-116201 NC2 cell reselection SET interval in GCELLNC2PAR the same A(Optional) cell GBFD-116201
NetworkControlled Cell Reselection (NC2) NetworkControlled Cell Reselection (NC2)
RESELINTE Cell Reselect RVAL Interval
BSC6900
Normal Cell RESELWAT Reselection CHPERIOD Watch Period
BSC6900
The number of received Packet Measurem ent Report messages on the receive level of the serving cell is measured continuous ly. When the statistical value is greater than or equal to the value of this parameter, the normal SET reselection GCELLNC2PAR decision is A(Optional) made. GBFD-116201
Normal Cell RESELWOR Reselection SENLEVTHR Worsen Level SH Threshold
BSC6900
If the number of times when the receive level of the serving cell within "Normal Cell Reselectio n Watch Period" is lower than "Cell Reselectio n Level Threshold" is greater than the value of this parameter, the normal cell SET reselection GCELLNC2PAR is A(Optional) triggered. GBFD-116201
ReservedDyn Number of PdchPreTran Reserved Num Dynamic Channel BSC6900
This parameter specifies the number of the reserved PDCHs that are not used for channel converstio n in the dynamic SET transferabl PDCH GCELLPSCHM( e channel Dynamic Optional) pool. GBFD-113101 Adjustment
Reserved TCH ReservedIdle Number for PA Ch Turning On
BSC6900
This parameter specifies the number of idle channels that should be reserved on a cell after the TRX is shut down. When the number of idle channels on a cell is smaller than this threshold, the BSC6900 enables a TRX. This parameter is used to prevent the impact enabling or disabling SET delay on GCELLOTHEXT the (Optional) efficiency GBFD-111602
ResetAlmDel BTS Reset Alarm aySwitch Delay Switch BSC6900
Whether to withhold link breakdown alarms in case of BTS resets due to data configurati ons GBFD-111202 O&M of BTS
ResetAlmDel BTS Reset Alarm ayTime Delay Time BSC6900
If OML links break down after BTS resets caused by data configurati ons and recover within the period specified by this parameter, configurati on reset alarms are reported; If OML links fail to recover within the period specified by this parameter, OML link breakdown alarms are reported. GBFD-111202 O&M of BTS
Reset Interval of RESETINTE Account Lock RVAL Counter
BSC6900
Interval for resetting the counter SET when the PWDPOLICY(O user fails Security ptional) to log in MRFD-210305 Management Retry times after the peer response timer expires SET during BSCNSPARA(O NSVC ptional) reset GBFD-114101 GPRS The waiting time from BTS detect OML SET disconnect BTSOTHPARA( to BTS Optional) reset. GBFD-111612
RESETRETR Y Reset Retry
BSC6900
RESETTIME BTS Reset Time
BSC6900
Multi-Carrier Intelligent Voltage Regulation
RESETTIME R Reset Timer
BSC6900
Duration of the peer response timer SET during BSCNSPARA(O NSVC ptional) reset GBFD-114101 GPRS
RESID
Reason
BSC6900
Reason for activating TST the radio SNDRSI(Mandat status Gb Interface ory) procedure GBFD-119001 Function Whether the HO RQD messages sent by the BSC to an MSC carry response request cells. Response request cells are optional. They are used to inform the MSC whether it needs to return HO REJECT messages when HO RQD messages fail to A Interface trigger Protocol handovers. GBFD-111804 Process
Response on OutRespReqSel BSC HO Req BSC6900
SET OTHSOFTPAR A(Optional) DLD LICENSE(Optio nal) ULD LICENSE(Optio nal)
REST
Resume Broken Downloads Flag
BSC6900
Whether to resume O&M of BSC broken GBFD-111203 License download MRFD-210403 Management
Sub-protocol RESTARTTM negotiate out R time[S]
BSC6900
Duration of the Abis IP over ADD PPP/MP E1/T1 PPPLNK(Option link restart GBFD-118611 A IP over al) timer GBFD-118622 E1/T1
Sub-protocol RESTARTTM negotiate out R time[S]
BSC6900
Duration of the Abis IP over ADD PPP/MP E1/T1 MPLNK(Optional link restart GBFD-118611 A IP over ) timer GBFD-118622 E1/T1 EXP ALMLOG(Option al) STA Restoratio ALMLOG(Option n type of Faulty al) the alarm MRFD-210304 Management Time for the BSC to initiate the common measurem ent or information exchange procedure ADD after this GNRNC(Optiona procedure MBSC Load l) fails MRFD-211402 Balancing
RESTYPE
Alarm Restore Type
BSC6900
RESUMETIM ER Resume Timer
BSC6900
REVCHANN Reserved UM Channel Number BSC6900
While assigning channels, the BSC ensures that the sum of the number of channels occupied by highpriority users and the number of idle channels reserved for highpriority users is no smaller than this parameter. Every time the BSC assigns channels to a user whose priority is lower than SET "Highest GCELLCHMGB Priority", it Resource ASIC(Optional) checks GBFD-116001 Reservation
RFMAXPWR Max RC Power DEC Reduction
BSC6900
Maximum number of levels that the BTS RF power decreases. This parameter is used to control the decrease in the BTS RF power. If the value is too large, the BTS power decreases too much. If the value is too small, the BTS power decreases less and the power SET decrease GCELLOTHEXT effect is Configuration (Optional) not good. MRFD-210301 Management
RFRESINDP Radio Resource RD Report Period
BSC6900
Interval for sending the radio resource indication messages. The TRX reports the interferenc e level for each of the channels that have been idle for the whole measurem ent period. This parameter is used by a BTS to inform the BSC6900 of the interferenc e levels on idle Radio channels Dedicated of a TRX. Channel For details, Management SET see GSM System GCELLCCCH(O Rec. 08.58 GBFD-111004 Information ptional) and 08.08. GBFD-111101 Sending
RFT
Execute Interval
BSC6900
Interval for executing the scheduled subtask The unit is determined according to the time mode. 1. If the time mode is set to "DAILY_T" or "DAILY_C" , the unit is day. 2. If the time mode is set to "WEEKLY _T" or "WEEKLY _C", the unit is week. 3. If the time mode is set to ADD "MONTHL SUBTSK(Option Y_T" or al) "MONTHL GBFD-111203 O&M of BSC
RFUCFGBYS Configure RFU by LOT Slot BSC6900
ADD BTS(Optional)
1. This parameter specifies whether to configure the DRFU, MRFU, GRFU, or XRFU by slot or link. 2. When setting the BTS to support the configurati on of the RFU by slot, set this parameter to "YES". When setting the BTS not to support the configurati on of the RFU by slot, set this parameter to "NO". 3. If this Voice Fault parameter GBFD-119301 Diagnosis
RGPSINDIC ATION GPS or RGPS
BSC6900
Satellite card protocol that is enabled to communic ate with the satellite card connecting to the DGPS. If "RGPS" is specified, it indicates that the RGPS satellite card protocol is enabled to communic ate with the satellite card connecting to the DGPS. If "GPS" is SET specified, it BTS GPS BTSDGPSBP(O indicates Synchronizatio ptional) that the GBFD-510401 n Whether to support RAN information manageme nt (RIM). IN the RIM procedure, RANs(Radi o Access Network) can exchange messages through the core network. GBFD-116301
RIMSUP
RIM Support
BSC6900
ADD NSE(Optional)
Network Assisted Cell Change (NACC)
RLCN
Channel No.
BSC6900
RLT
Radio Link Timeout
BSC6900
The loopback channel number when the port loopback mode is SET set to TDM E1T1LOP(Optio remote nal) loopback None Time for disconnecti ng a call when the MS fails to decode the SACCH. Once a dedicated channel is assigned to the MS, the counter S is enabled and the initial value is set to this parameter value. Each time an SACCH message is not decoded, the counter S decreases by 1. Each time an SET SACCH GCELLCCBASI message C(Optional) is correctly GBFD-111004
None
Remote TC RMTTCATE Subrack Ater RTRANSMO Transmission DE Mode
BSC6900
Transmissi on mode on the Ater interface of the remote TC subrack. The meaning of values is as follows: STANDAL ONETC: not converged MASTERI NPOOLTC : control subrack for TC convergen ce SLAVEINP OOLTC: non-control subrack for SET TC Ater BSCBASIC(Opti convergen Compression onal) ce GBFD-116902 Transmission RNC ID of a 3G external cell. The value of this parameter must be consistent with the data ADD configurati GEXT3GCELL( on at the Configuration Mandatory) RNC. MRFD-210301 Management
RNCID
RNC ID
BSC6900
RNCINDEX
Neighboring RNC Index BSC6900
Internal index of a neighborin g RNC. This parameter is set to 255 when the neighborin g RNC that serves the 3G external neighbor is not configured. You can use the "LST GNRNC" command to check whether the ADD neighborin GEXT3GCELL( g RNC is MBSC Load Optional) configured. MRFD-211402 Balancing ADD GNRNC(Mandat ory) ADD GIURGCONN(M andatory)
RNCINDEX
Neighboring RNC Index BSC6900
Internal index of a neighborin MBSC Load g RNC MRFD-211402 Balancing
RNCNAME
Neighboring RNC Name BSC6900
Name of a neighborin g RNC. The name is used to uniquely ADD identify a GNRNC(Mandat neighborin MBSC Load ory) g RNC. MRFD-211402 Balancing Name of SET the root CERTFILE(Opti certificate onal) file
RootCert
Root Certificate File Name
BSC6900
ROUTENO
Route No.
BSC6900
ADD Identifies a SGSNROUTEIN router FO(Mandatory) uniquely GBFD-118603 Gb over IP
ROUTEPOR TNO Route Port No.
BSC6900
Router port number. The setting of this parameter must be consistent with the ADD setting at SGSNROUTEIN the SGSN FO(Mandatory) side. GBFD-118603 Gb over IP
RPTDLVQIA Report Downlink LLOWED VQI Allowed
BSC6900
Whether to allow the BTS to report the downlink voice quality index (VQI). The VQI is used to indicate voice quality. It is calculated on the basis of SET BER, FER, Voice Quality GCELLSOFT(O and frame Index (Uplink ptional) stealing. GBFD-116801 VQI)
Cell Reselection MR Period in RPTPERIODI Packet Idle Mode BSC6900
Cell reselection measurem SET ent report GCELLNWCTR period in LMSRPARA(Opt packet idle Networking ional) mode GBFD-119107 Control Mode
Cell Reselection MR Period in RPTPERIOD Packet Transfer T Mode
BSC6900
Cell reselection measurem ent report Networking SET period in Control Mode GCELLNWCTR packet GSM/TDLMSRPARA(Opt transmissi GBFD-119107 SCDMA ional) on mode GBFD-114302 Interoperability Speed reduction ADD alarm IPLOGICPORT( report Optional) threshold GBFD-118605 IP QOS Whether to allow the BTS to report the voice quality index (VQI). If this parameter is set to Report, the BTS reports the VQI. The BSC6900 collects the traffic statistics on a per VQI basis. There are 11 levels of speech quality. If the level is lower, the speech quality is better. The traffic SET related to Voice Quality GCELLOTHBAS AMR and Index (Uplink IC(Optional) non-AMR GBFD-116801 VQI)
RPTTHD
Decrease rate alarm report threshold
BSC6900
RPTVOICE
Report Speech Quality
BSC6900
Filter Length for SDCCH RQSIGNLEN REP_QUANT
BSC6900
For the purpose of accurately reflecting the radio environme nt of a network, filtering is performed on the measured values in several consecutiv e measurem ent reports. This parameter indicates the number of enhanced measurem ent reports received on signaling channels used to SET filter the Enhanced GCELLHOFITP REP_QUA Measurement EN(Optional) NT value. GBFD-117501 Report(EMR)
Filter Length for RQTRAFFLE TCH N REP_QUANT
BSC6900
For the purpose of accurately reflecting the radio environme nt of a network, filtering is performed on the measured values in several consecutiv e measurem ent reports. This parameter indicates the number of enhanced measurem ent reports received on voice channels used to SET filter the Enhanced GCELLHOFITP REP_QUA Measurement EN(Optional) NT value. GBFD-117501 Report(EMR) Resource ADD group IPPATH(Mandat number of ory) the PATH GBFD-118605 IP QOS The parameter indicates whether the resource group is shared or is used by ADD a specific RSCGRP(Mand telecom atory) carrier. None
RSCGRPN
Rscgrp No.
BSC6900
Resource RSCMNGMO Management DE Mode
BSC6900
None
Resource RSCMNGMO management DE mode
BSC6900
Resource manageme nt mode. The logical port working in the SHARE mode can be shared by multiple carriers. The logical port working in the EXCLUSIV E mode can be ADD used by IPLOGICPORT( only one Optional) carrier. GBFD-118605 IP QOS Timer for punishing the neighborin g cells when handover failures occur due to resourcerelated causes, such as SET resources GCELLHOFITP being GBFD-110601 EN(Optional) insufficient GBFD-510501
RSCPENALT YTIMER RscPenaltyTimer BSC6900
RSCPOFF
RSCP Offset
BSC6900
This parameter adjusts "Min RSCP threshold" to enable the selection of 3G GSM/WCDMA candidate Interoperability ADD cells based GSM/TDG3GNCELL(Opti on cell GBFD-114301 SCDMA onal) priorities GBFD-114302 Interoperability
RSCP Threshold RSCPTHRE for Layer of 3G S Cell BSC6900 RSD alarm source RSF alarm source
RSDSRC
BSC6900
RSFSRC
BSC6900
This parameter determines the layers of 3G neighborin g cells. If the measured value of a 3G neighborin g cell is lower than this threshold, the 3G neighborin g cell is positioned at the ADD bottom GEXT3GCELL( layer, that Optional) is, layer 4. RSD alarm SET triggering OPT(Optional) source RSF alarm SET triggering OPT(Optional) source
GSM/WCDMA Interoperability GSM/TDGBFD-114301 SCDMA GBFD-114302 Interoperability
None
None
None
None
GPRS RSLCTOFFE Reselection R Offset
BSC6900
Used for calculating C2. The MS with a large value can be SET assigned GCELLNCRESE with high LECTPARA(Opti access onal) priority. GBFD-114101 GPRS Average downbandwidth of RSL link in BTS. GBFD-111202 O&M of BTS Differentiat ed service code of the specified RSL GBFD-111202 O&M of BTS RSL service priority Average
RSLDL
BTS RSL Average Downbandwidth
BSC6900
RSLDSCP
RSL DSCP
BSC6900
SET BSCABISPRIM AP(Optional) SET BSCABISPRIM AP(Optional) SET BTSBWPARA( Mandatory)
RSLPRI
RSL Priority BTS RSL Average Upbandwidth
BSC6900
RSLUL
BSC6900
upbandwidth of RSL link in BTS. GBFD-111202 O&M of BTS
RSLVLANID RSL VlanId RSL LAPD Window Size
BSC6900
RSLWS
BSC6900
SET BSCABISPRIM AP(Optional) SET BTSLAPDWS(O ptional)
Specified RSL Vlan Id GBFD-111202 O&M of BTS Size of the RSL LAPD window GBFD-118601 Abis over IP
RSNDES
Lock Reason
BSC6900
RSSThres
Relative Signal Strength Threshold
BSC6900
Reason for locking the configurati on and LCK manageme CMCTRL(Mand nt control Configuration atory) rights MRFD-210301 Management Threshold of the level difference between a neighborin g cell and the serving cell, based on which the BSC filters the measured values in the measurem ent reports and collects traffic statistics during automatic neighborin g cell optimizatio n and automatic frequency optimizatio n. The filtering 2G/3G SET results and Neighboring OTHSOFTPAR collected Cell Automatic A(Optional) traffic GBFD-510901 Optimization
RSTDESFIL E
Reset file
BSC6900
RSTF
Result File Name BSC6900
This is the description file for resetting the board. The reset file names UPD of different BSC/RNC JTGCPLD(Mand boards are Software atory) different. MRFD-210401 Management Name of the result file generated after the command is executed. If this parameter is not specified, the name of the result file is automatica lly generated in the format of BATCH_R ST_YYYY MMDDHH NNSSmm m. The result file is located in the ftp directory in the main area of the RUN OMU, and BATCHFILE(Opt you should ional) not add the GBFD-111203 O&M of BSC
RSTFUN
Restart switch
BSC6900
ADD OPC(Optional)
Whether to enable the A Interface restart Protocol function GBFD-111804 Process
RSTIME
Restart Timer
BSC6900
ADD BTSPPPLNK(O ptional) ADD BTSMPLNK(Opt ional) IMP BTSPPPLNK(O ptional) IMP BTSMPLNK(Opt ional) Timer
Max Channel RSVCHMFO Num Reserved RECNUM for EC
BSC6900
Maximum number of TCH channels reserved SET for Emergency GCELLCHMGB emergency Call Service ASIC(Optional) call users GBFD-110202 (TS12)
Reserved RSVDPARA1 Parameter 1
BSC6900
Parameter SET 1 reserved TRANSPATCHP for future ARA(Optional) use. None
None
RSVDPARA1 Reserved 0 Parameter 10
BSC6900
Parameter 10 SET reserved TRANSPATCHP for future ARA(Optional) use. None
None
BSC6900
None
BSC6900
None
BSC6900
None
BSC6900
None
BSC6900
None
BSC6900
None
BSC6900
None
BSC6900
None
RsvIdleChan Reserve Idle Num Channel Number BSC6900
Number of reserved idle channels. If this parameter is set too small, the TRX may be frequently enabled/di sabled; if this parameter is set too large, idle TRX will SET not be BSCDSTPA(Opt timely ional) closed. GBFD-111602
RT
Revertive type
BSC6900
RTCONTEXT Routing Context
BSC6900
Recovery mode of the MSP SET protection Board MSP(Optional) group GBFD-111701 Switchover Routing context. The routing context identifies a specified route. If the routing context is to be configured, its value must be ADD negotiated M3LE(Optional) between A over IP ADD the two GBFD-118602 A IP over M3DE(Optional) ends. GBFD-118622 E1/T1
RTCPBWRA RTCP Bandwidth TIO Usage BSC6900
Ratio of the RTCP path bandwidth to the A interface bandwidth. According to the Real-time Transport Control Protocol (RTCP), the BSC6900 and the MSC negotiate the bandwidth occupation rate of the user plane on the A interface, that is, the bandwidth occupied by the data packets ADD generated GCNNODE(Opti during the onal) negotiation GBFD-118602 A over IP
RTCPSWITC H Enable RTCP
BSC6900
RTDEST
Destination Network Address BSC6900
RTDESTMA Destination SK Address Mask
BSC6900
Whether to enable the real-time transport control protocol (RTCP) function. The BSC6900 and the MSC negotiate whether and how to compress the data over the A interface according to the RTCP. The setting of this parameter on the BSC6900 side must be consistent with that ADD on the GCNNODE(Opti MSC side. onal) This GBFD-118602 A over IP ADD OMUIPRT(Mand Destination atory) IP address None None ADD OMUIPRT(Mand Routing atory) mask None None ADD BTSIPRT(Optio nal) IMP BTSIPRT(Mand atory) Index of a route. The index is unique in a BTS. GBFD-118601 Abis over IP
RTIDX
Route Index
BSC6900
RTOALPHA
RTO alpha value BSC6900
It is used to calculate the roundtrip time of the protocol stack and the RTO value. The value must be smaller than "RTOBET A". In the case of the fixed value of the "RTOBET A", the larger the value is, the less the link ADD delay SCTPLNK(Optio sensitivity nal) is. GBFD-118602 A over IP
RTOBETA
RTO beta value
BSC6900
It is used to calculate the roundtrip time of the protocol stack and the RTO value. The value must be greater than "RTOALP HA". In the case of the fixed value of the "RTOALP HA", the larger the value is, the less the link ADD delay SCTPLNK(Optio sensitivity nal) is. GBFD-118602 A over IP When the "RTOMIN" and "RTPMAX" parameters are set to fixed values, the larger the value is, the longer ADD the check SCTPLNK(Optio of the link nal) is. GBFD-118602 A over IP When the "RTOMIN" parameter is set to a fixed value, the larger the value is, the longer ADD the check SCTPLNK(Optio of the link nal) is. GBFD-118602 A over IP
RTOINIT
RTO initial value
BSC6900
RTOMAX
RTO max value
BSC6900
RTOMIN
RTO min value
BSC6900
When the "RTOMAX" parameter is set to a fixed value, the larger the value is, the longer ADD the check SCTPLNK(Optio of the link nal) is. GBFD-118602 A over IP Whether to measure the delay on the link between the BTSs that serve the calling MS and the called SET MS GCELLBASICP respectivel ARA(Optional) y GBFD-115506
Measure Link RTPSWITCH Delay Switch
BSC6900
RTTIPDCHM RTTI PDCH ULTIPLEXTH Multiplex RESH Threshold
BSC6900
Maximum number of RTTI TBFs that can be multiplexed on the PDCH. A PDCH can be assigned when the number of RTTI TBFs on it is smaller than the value of this parameter. This parameter is valid only when its value is smaller than or equal to "MSRD PDCH DL Multiplexin SET g GCELLPSCHM( Threshold" Optional) .
GBFD-510805 GBFD-119901 GBFD-119902 GBFD-119905 GBFD-119906 GBFD-111003 GBFD-510805 GBFD-119901 GBFD-119902 GBFD-119905 GBFD-119906 GBFD-111003
Latency Reduction Streaming QoS(GBR) QoS ARP&THP PoC QoS Conversational QoS Radio Common Channel Management Latency Reduction Streaming QoS(GBR) QoS ARP&THP PoC QoS Conversational QoS Radio Common Channel Management
RTTYPE
Route Type
BSC6900
Type of the route. When the BTS does not support IP over E1, the parameter Route Type needs to be set to NEXTHOP (Next Hop). When the BTS supports IP over E1, the parameter Route Type needs to be set to OUTIF(Out Interface) because ADD the BTSIPRT(Mand packets at atory) the data IMP link layer BTSIPRT(Mand are atory) encapsulat GBFD-118601 Abis over IP Logical port speed increase step. When detecting the available bandwidth increase through IPPM, the system increases the bandwidth of the logical port ADD by using IPLOGICPORT( this Optional) parameter. GBFD-118605 IP QOS
RUS
Rate up step [kbps]
BSC6900
RUSPRD
Rate up step adjust period [PLPRD]
BSC6900
Bandwidth increase step adjustment period. This parameter indicates the period to increase the bandwidth of the logical port. Note that the actual bandwidth increase step adjustment period is the packet drop ratio Statistics period multiplied ADD by this IPLOGICPORT( parameter Optional) value. GBFD-118605 IP QOS SET BTSAUTODLDA CTINFO(Mandat ory) ADD IPPATH(Mandat ory) R-version number of the BTS software GBFD-111202 O&M of BTS Receive bandwidth of IP path GBFD-118605 IP QOS
RVer
R-Version No. Backward Bandwidth
BSC6900
RXBW
BSC6900
RxBw
Backward Bandwidth
BSC6900
ADD RSCGRP(Mand Receive atory) bandwidth GBFD-118605 IP QOS Minimum receiving power level for the MS SET in the cell GCELLSERVPA to access RA(Optional) the system GBFD-114101 GPRS
RXLEVACC MIN
Minimum Receiving level for Access
BSC6900
RXLEVOFF
Interfere HO Qual. Thresh Offset for AMR FR
BSC6900
For AMR FR voice services, a fixed amount of offset is added to the correspond ing grade of the received signal quality for the interferenc e handover AMR FR of nonHUAWEI II SET AMR FR GBFD-115501 Handover GCELLAMRQU voice GBFD-510501 HUAWEI I L(Optional) services. GBFD-110601 Handover
RXMIN
Minum Access RXLEV
BSC6900
Minimum received signal level of the MS. This level is reported in the system information . This parameter specifies the minimum receive level of an MS to access the BSS. For details. see GSM Rec. 05.08. The value of this parameter ranges from 0 to 63 (correspon ding to SET 110 dBm System GCELLBASICP to -47 Information ARA(Optional) dBm). GBFD-111101 Sending
RXQCKFALL Rx_Level_Drop HOEN HO Allowed
BSC6900
Whether to use the emergency handover algorithm in case the receive level of the MSs drops rapidly, HUAWEI I SET thus Handover GCELLHOBASI preventing GBFD-110601 HUAWEI II C(Optional) call drops. GBFD-510501 Handover
RXQUAL1
Interfere HO Qual. Thresh 1 for Non-AMR FR BSC6900
Threshold for the interferenc e handover of NonAMR FR voice services. AMRFR refers to HUAWEI I SET Adaptive Handover GCELLAMRQU Multi-Rate GBFD-110601 HUAWEI II L(Optional) Full Rate. GBFD-510501 Handover
RXQUAL10
RXQUAL11
RXQUAL12
RXQUAL2
RXQUAL3
RXQUAL4
RXQUAL5
RXQUAL6
RXQUAL7
RXQUAL8
RXQUAL9
Threshold for the interferenc e handover of NonAMR FR voice services. AMRFR refers to HUAWEI I SET Adaptive Handover GCELLAMRQU Multi-Rate GBFD-110601 HUAWEI II L(Optional) Full Rate. GBFD-510501 Handover Number of the RXU chain to ADD which the TRXBIND2PHY RXU BRD(Mandatory) belongs GBFD-111202 O&M of BTS
RXUCHAINN O RXU Chain No
BSC6900
RXUCHAINN O RXU Chain No.
BSC6900
Number of the RXU chain. The RXU chain SET No. is BTSRXUBP(Ma unique in ndatory) one BTS. GBFD-111202 O&M of BTS Number of the RXU chain ADD where the BTSRXUBRD(M board is andatory) located GBFD-111202 O&M of BTS
RXUCHAINN O RXU Chain No.
BSC6900
RXUIDTYPE RXU Index Type
BSC6900
ADD TRXBIND2PHY Index type BRD(Mandatory) of the RXU GBFD-111202 O&M of BTS
RXUIDTYPE RXU Index Type
BSC6900
SET Type of the BTSRXUBP(Ma RXU board ndatory) index GBFD-111202 O&M of BTS ADD TRXBIND2PHY Name of BRD(Mandatory) the RXU
RXUNAME
RXU Name
BSC6900
RXUNAME
RXU Name
BSC6900
RXUNAME
RXU Name
BSC6900
Name of the RXU board. The RXU name SET is unique BTSRXUBP(Ma in one ndatory) BTS. GBFD-111202 O&M of BTS ADD BTSRXUBRD(M Name of andatory) an RXU GBFD-111202 O&M of BTS Position number of ADD the RXU TRXBIND2PHY on the BRD(Mandatory) RXU chain GBFD-111202 O&M of BTS Position No. of the SET RXU board BTSRXUBP(Ma on the ndatory) RXU chain GBFD-111202 O&M of BTS Position of the RXU ADD board on BTSRXUBRD(M an RXU andatory) chain GBFD-111202 O&M of BTS
RXUPOS
RXU Chain Position
BSC6900
RXUPOS
RXU Chain Position
BSC6900
RXUPOS
RXU Board Position
BSC6900
RXUTYPE
RXU Board Type BSC6900
SET BTSRXUBP(Ma Type of the ndatory) RXU board GBFD-111202 O&M of BTS Whether to enable the switch to set the S1 value. S1 byte, also called the synchroniz ation status byte, is one of the optical connection parameters . None S1 sending value. It is a synchroniz ation status byte used by the local end to examine the quality of the received clock signals before the local end switches to a clock source with higher quality. The smaller the value of S1 is, the lower the clock quality is. None
S1SWITCH
S1 value setting switch
BSC6900
SET OPT(Optional)
None
S1VALUE
S1 Value
BSC6900
SET OPT(Optional)
None
SAADIS
Special Analog Alarm Enabled
BSC6900
Whether to enable the special analog alarm. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing Remote EAC SET parameter Maintenance BTSDEMUBP(O in another GBFD-112301 Faulty ptional) mode. MRFD-210304 Management
SAAF
Special Analog Alarm Flag
BSC6900
The value of this parameter consists of 32 bits, each of which determines whether to enable the correspond ing special analog alarm. "0" indicates that the alarm is enabled, and "1" indicates that the alarm is disabled. When an item is selected, the correspond ing analog alarm switch is SET disabled. BTSAPMUBP(O The ptional) available GBFD-111202 O&M of BTS
SaGsmrMsc
Trunking MSC
BSC6900
Whether the MSC independe ntly processes the trunking services. When this parameter is set to YES, the MSC independe ntly processes the trunking services, that is, the trunking services are ADD processed Public Voice GCNNODE(Opti only by this Group Call onal) MSC. GBFD-510301 Service
SAICALLOW ED SAIC Allowed
BSC6900
Whether an MS supports the SAIC function. Single Antenna Interferenc e Cancellatio n (SAIC) is used to reduce the impact of interferenc e on the reception of downlink signals through a signal processing technology . An MS enabled with SAIC has improved ability of antiinterferenc SET e. After GCELLPWRBA SAIC is Network SIC(Optional) enabled, GBFD-118103 Support SAIC
Power Control SAICTHRED Threshold Adjust APDTVALUE for SAIC BSC6900
Adjustment step of the downlink signal quality threshold in power control algorithm II for MSs that support SAIC. The network side uses a lower downlink signal quality threshold for SAICsupported MSs in power control, thus lowering the transmit power of the SET correspond GCELLPWR2(O ing BTS Network ptional) and GBFD-118103 Support SAIC
Power Control SAICTHRED threshold Adjust APDTVALUE for SAIC
BSC6900
Adjustment step of the downlink signal quality threshold in power control algorithm III for MSs that support SAIC. The network side uses a lower downlink signal quality threshold for SAICsupported MSs in power control, thus lowering the transmit power of the SET correspond GCELLPWR3(O ing BTS Network ptional) and GBFD-118103 Support SAIC
SALOG
Special Analog Alarm Enabled
BSC6900
The value of this parameter consists of five bits, which determines whether to enable the alarms. "0" indicates that the analog alarm is enabled, and "1" indicates that the analog alarm is disabled. In multimode scenario, the value of this parameter in one mode must be the same as SET the value BTSDPMUBP(O of the Faulty ptional) correspond MRFD-210304 Management Index of a cell with SET the same GCELLDYNTUR coverage NOFF(Mandator as the Dynamic Cell y) current cell GBFD-111610 Power Off Index type used when the command Dynamic Cell is executed GBFD-111610 Power Off
SAMECVGC Same Coverage ELLID Cell No
BSC6900
SAMECVGC Same Coverage ELLIDTYPE Cell Index Type
BSC6900
SET GCELLDYNTUR NOFF(Mandator y)
SAMECVGC Same Coverage ELLLOADST Cell Load Stat. ATTM Time
BSC6900
The BSC6900 checks the load of the same coverage cell of the target cell once a minute. When the number of times in which the load of the same coverage cell is lower than "Same Coverage Cell Load Threshold" is equal to the value of this parameter, SET the target GCELLDYNTUR cell is Dynamic Cell NOFF(Optional) disabled. GBFD-111610 Power Off
SAMECVGC Same Coverage ELLLOADTH Cell Load RD Threshold
BSC6900
A cell that can be disabled is allowed to be disabled only when the load of the same coverage cell is lower than this SET threshold GCELLDYNTUR for a Dynamic Cell NOFF(Optional) period. GBFD-111610 Power Off SET GCELLDYNTUR NOFF(Mandator y) Name of the same coverage cell
SAMECVGC Same Coverage ELLNAME Cell Name
BSC6900
Dynamic Cell GBFD-111610 Power Off
SACCH MultiSAMULFRM Frames
BSC6900
This parameter is used by the BTS to inform the BSC6900 of radio link connection failure. When the BTS receives the SACCH measurem ent report from the MS, the counter for determinin g whether a radio link is faulty is set to the value of this parameter. Each time the BTS fails to SET decode the GCELLCCBASI SACCH C(Optional) measurem GBFD-111004
SAS
Special Alarm Switcher
BSC6900
The value of this parameter consists of three bits, which determines whether to enable the alarms. "0" indicates that the alarm is enabled, and "1" indicates that the alarm is disabled. In multimode scenario, the value of this parameter in one mode must be the same as the value of the SET correspond BTSDPMUBP(O ing Faulty ptional) parameter MRFD-210304 Management
SASE
Special Alarm Switch Enabled
BSC6900
Whether to enable the special alarm switch. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing Remote EAC SET parameter Maintenance BTSDEMUBP(O in another GBFD-112301 Faulty ptional) mode. MRFD-210304 Management
SASV
Special Alarm Switch Valid Vol. Level BSC6900
Level specificatio ns of special Boolean value alarms. Two specificatio ns are available: high level and low level. By default, only alarms of the door status sensor are low level, and alarms of the water sensor, smoke sensor, and infrared sensor are high level. Remote EAC SET In multiMaintenance BTSDEMUBP(O mode GBFD-112301 Faulty ptional) scenario, MRFD-210304 Management Whether to enable the energy saving function of the TRX SET for the BTSDOMUBP(O BTS3002E ptional) . GBFD-111202 O&M of BTS
SAVEENABL Energy Saving ED Support
BSC6900
SBAF
Special Bool Alarm Flag
BSC6900
Whether to enable the special Boolean alarms, that is, water sensor alarm (bit 0), smog sensor alarm (bit 1), and door sensor alarm (bit 2). All the Boolean alarms are enabled by default. "0" indicates that the alarm is enabled, and "1" indicates that the alarm is disabled.T he SET available BTSAPMUBP(O items are ptional) WS_DISA GBFD-111202 O&M of BTS Number of the BTS. The BTS is COL numbered SoftSYNCINFO(Man uniquely in Synchronized datory) a BSC. GBFD-118201 Network Name of the BTS. The BTS is COL named SoftSYNCINFO(Man uniquely in Synchronized datory) a BSC. GBFD-118201 Network
SBTSID
First BTS Index
BSC6900
SBTSNAME First BTS Name
BSC6900
SCALEORD ER
SCALE_ORDER BSC6900
This parameter indicates that when the MS reports the EMR, it adds the value of this parameter to the received signal level, and then converts the result into the RXLEV value. For details, see GSM Rec. 05.08. If the SCALE_Or der reported by the MS is 10 dBm, SET level Enhanced GCELLCCUTRA values 0Measurement NSYS(Optional) 63 map GBFD-117501 Report(EMR) DSCP correspond SET ing to the BSCPSTCDSC streaming PMAP(Optional) service GBFD-118603 Gb over IP
SCDSCP
DSCP of STREAM[QoS]
BSC6900
Serving Cell Filter SCELLFILTE Length MR R Number BSC6900
When the network receives measurem ent reports, in considerati on of the accuracy of a single measurem ent report, the measurem ent values in certain measurem ent reports are filtered to represent the radio operating environme nt. The parameter specifies the number of measurem ent reports SET used for GCELLHOFAST filtering Fast Move (Optional) measurem GBFD-510102 Handover Number of the cell where the ADD TRX NCELL(Mandato reside. The ry) cell is COL numbered SYNCINFO(Man uniquely in Configuration datory) a BSC. MRFD-210301 Management ADD NCELL(Mandato ry) COL SYNCINFO(Man Name of datory) cell 1
SCELLID
First Cell Index
BSC6900
SCELLNAME First Cell Name
BSC6900
SCHEME
Coding Scheme
BSC6900
SCHNNO
Sub Channel No. BSC6900
A key parameter that indicates SET the coding GCELLSBC(Opt scheme of ional) a simple ADD cell GSMSCB(Mand broadcast Simplified Cell atory) message GBFD-113602 Broadcast STR Number of BTSTST(Option the subal) channel GBFD-111202 O&M of BTS
SCMD
Command String BSC6900
Command string of the scheduled subtask. This command can be only a service command, and the system ADD command SUBTSK(Manda cannot be tory) added to ADD the SUBCMD(Mand scheduled atory) subtask. GBFD-111203 O&M of BSC Type of querying used to set the measurem SET ent report GMRSCOPE(M collection andatory) scope. GBFD-111203 O&M of BSC Indicates the index of the interADD subrack SRCONPATH(O connection ptional) path GBFD-111203 O&M of BSC
SCOPETYPE Scope Type
BSC6900
SCPIDX
Subrack Communication Path Index
BSC6900
SCRAMBLE
Scrambling Code or Cell Parameter Id BSC6900
Scrambling code of a 3G cell. The scrambling code is used to differentiat e terminals or cells. It is used after spread spectrum. Therefore, it does not change the bandwidth of signals, but only distinguish es the signals from different sources. Through scrambling ADD , multiple GEXT3GCELL( transceiver GSM/WCDMA Mandatory) s can use Interoperability SET the same GSM/TDGCELLHOFDD codes for GBFD-114301 SCDMA BA2(Mandatory) spread GBFD-114302 Interoperability EXP ALMLOG(Option al) STA ALMLOG(Option al)
SCSN
Start Serial No.
BSC6900
Start serial number of the alarm Faulty record MRFD-210304 Management
SCTPLNKN
SCTP link No.
BSC6900
SCTP link number of XPU ADD board. This SCTPLNK(Mand number atory) identifies ADD an SCTP A over IP M3LNK(Mandat link GBFD-118602 A IP over ory) uniquely. GBFD-118622 E1/T1 Date when the ADD scheduled SUBTSK(Manda task is tory) started GBFD-111203 O&M of BSC
SD
Start Date
BSC6900
SD
Start Date
BSC6900
Start date of the alarm record. By default, the EXP start date ALMLOG(Option is 2000-01Faulty al) 01. MRFD-210304 Management Start date of the alarm record. By default, the STA start date ALMLOG(Option is 2000-01Faulty al) 01. MRFD-210304 Management Maximum number of days for SET storing ALMCAPACITY( history Faulty Optional) alarms MRFD-210304 Management
SD
Start Date
BSC6900
SD
Alarm Log Saved Time BSC6900
SDALMTHD
SD Alarm Threshold
BSC6900
SDATE
Start Date
BSC6900
SD alarm SET triggering MSP(Optional) threshold STR BTSLOG(Option al) Start date
Board GBFD-111701 Switchover
SDAY
Start date
BSC6900
SET TZ(Mandatory)
Start date Support of of the Daylight daylight Saving Time saving GBFD-116101 Configuration time (DST) MRFD-210301 Management
SDCCHChannelN SDCCHNUM umber BSC6900
Number of SDCCH channels. Rules for SDCCH channel allocation: 1. Allocate channels 1 and 3 of main frequency B preferential ly. 2. Allocate channels 1, 3, 5, and 7 according to the physical position order of the frequencie s. Thus, the maximum number of SDCCH ADD channels is GCELLQUICKS (actual Configuration ETUP(Optional) number of MRFD-210301 Management
Waiting for MR SDCCHWait on SDCCH MREn Switch
BSC6900
Whether a call must camp on the SDCCH for a specific duration before being assigned SET with a Assignment GCELLHOAD(O traffic and Immediate ptional) channel. GBFD-110502 Assignment Duration for a call camping on the SDCCH before being assigned SET with a GCELLHOAD(O traffic ptional) channel.
Duration for SDCCHWait Waiting MR on MRTimeLen SDCCH
BSC6900
Assignment and Immediate GBFD-110502 Assignment
DL Level SDDROPST Threshold for ATDLLEV SDCCH Call Drop BSC6900
Level threshold for measuring the number of call drops on SDCCH. When call drop occurs on the SDCCH, the BSC6900 determines whether the downlink receive level is lower than this threshold. If the downlink receive level is lower than this threshold SET and the TA GCELLOTHEXT is smaller (Optional) than the GBFD-111004
DL Quality SDDROPST Threshold for ATDLQUAL SDCCH Call Drop BSC6900
Quality threshold for measuring the number of call drops on SDCCH. When call drop occurs on the SDCCH, the BSC6900 determines whether the downlink quality level multiplied by 10 is higher than this threshold. If all the following four conditions are met, SET the number GCELLOTHEXT of call (Optional) drops on GBFD-111004
UL Level SDDROPST Threshold for ATULLEV SDCCH Call Drop BSC6900
Level threshold for measuring the number of call drops on SDCCH. When call drop occurs on the SDCCH, the BSC6900 determines whether the uplink receive level is lower than this threshold. If the uplink receive level is lower than this threshold and the TA SET is smaller GCELLOTHEXT than the (Optional) TA GBFD-111004
UL Quality SDDROPST Threshold for ATULQUAL SDCCH Call Drop BSC6900
Quality threshold for measuring the number of call drops on SDCCH. When call drop occurs on the SDCCH, the BSC6900 determines whether the uplink quality level multiplied by 10 is higher than this threshold. If all the following four conditions are met, the number SET of call GCELLOTHEXT drops on (Optional) SDCCH GBFD-111004
SDDYN
SDCCH Dynamic Allocation Allowed BSC6900
Whether to allow SDCCH dynamic allocation, that is, whether to allow dynamic conversion SET between SDCCH GCELLBASICP TCHs and Dynamic ARA(Optional) SDCCHs. GBFD-113001 Adjustment
SDENABLE
SD Enable
BSC6900
SET MSP(Optional)
SDFASTHOS WITCH SD Quick HO
BSC6900
Board Enable SD GBFD-111701 Switchover Whether to enable the SDCCH quick handover test function. If this parameter is set to Yes, the BSC6900 initiates intra-cell SDCCH handover as soon as the MSC issues an encrypted command to the MS. Thus, the forwarding encrypted signaling can be transmitted and received on a new SET signaling GCELLSOFT(O channel. In A5/3 Ciphering ptional) this way, GBFD-113503 Algorithm
SDFLAG
Shut Down Enabled
BSC6900
This parameter specifies whether the BSC6900 automatica lly shuts down the power amplifier of the TRX to save power when the BTS is powered by batteries SET after a GTRXDEV(Opti power Active Backup onal) failure. GBFD-111605 Power Control After a new SDCCH is assigned to an MS, the MS can be handed over to another channel only if the time during which the MS occupies the SDCCH is longer than the period HUAWEI I SET specified Handover GCELLHOCTRL by this GBFD-110601 HUAWEI II (Optional) parameter. GBFD-510501 Handover Maximum number of discarded MRs allowed on the SDCCH in SET a power HUAWEI III GCELLPWR3(O control Power Control ptional) period GBFD-117601 Algorithm
SDHOMININ Min Interval for TV SDCCH Hos
BSC6900
SDMRCUTN UM SdMrCutNum
BSC6900
Penalty Time on SDPUNTIME Fast Moving HO
BSC6900
Period in which level penalty is performed on the neighborin g cells of the cell where a fastmoving MS is located. The neighborin g cells must be located at the Macro, Micro, or Pico layer other than HUAWEI I ADD the Handover GEXT2GCELL( Umbrella GBFD-110601 HUAWEI II Optional) layer. GBFD-510501 Handover Level value of the penalty that is performed on the neighborin g cells of the cell where a fastmoving MS is located. The neighborin g cells must be located at the Macro, Micro, or Pico layer other than HUAWEI I ADD the Handover GEXT2GCELL( Umbrella GBFD-110601 HUAWEI II Optional) layer. GBFD-510501 Handover DSCP SET correspond BSCPSTCDSC ing to the PMAP(Optional) signaling GBFD-118603 Gb over IP
SDPUNVAL
Penalty on Fast Moving HO
BSC6900
SDSCP
DSCP of Signaling
BSC6900
SDSFPRI
SDSF Priority
BSC6900
SDT
Shutdown Temperature
BSC6900
Specifies the SF and SET SD event Board MSP(Optional) priority GBFD-111701 Switchover High temperatur e threshold for triggering power shutdown of the battery. If the power shutdown upon battery high temperatur e is enabled and the battery temperatur e is higher than the value of this parameter, the battery is automatica lly powered off. In multiSET mode O&M of BTS BTSAPMUBP(O scenario, GBFD-111202 BTS Power ptional) the value GBFD-111601 Management
Sliding Time SDTMWDAL Window Alarm MDIS Disappear
BSC6900
Sliding time window for collecting statistics on the alarms that disappear in a specified period of time.Sampl ing time window. In the period specified by this parameter, the duration in which the alarm ADD persists is BTSALMMGMR accumulat Faulty ULE(Mandatory) ed. MRFD-210304 Management Sliding time window for collecting statistics on the alarms that occur in a specified period of time.This parameter is similar to the sampling time window. In the period specified by this parameter, the duration in which the alarm ADD persists is BTSALMMGMR accumulat Faulty ULE(Mandatory) ed. MRFD-210304 Management
Sliding Time SDTMWDAL Window Alarm MOC Occurrence
BSC6900
SDV
Shutdown Voltage
BSC6900
Low voltage threshold for triggering power shutdown of the battery. If the power shutdown upon low voltage is enabled and the load voltage is lower than the value of this parameter, the battery is automatica lly powered off. In multimode scenario, the value of this SET parameter BTSAPMUBP(O in one ptional) mode must GBFD-111202 O&M of BTS Whether to allow the MS to search for a 3G cell when the SET BSIC must Enhanced GCELLCCUTRA be Measurement NSYS(Optional) decoded GBFD-117501 Report(EMR) SET Self BTSLOADCTRL Software (Mandatory) Version GBFD-111202 O&M of BTS
SEARCH3G SELFVERSI ON
3G Search PRIO BSC6900
Self Version
BSC6900
Send2QuterF Support Sent lag 2QUATER
BSC6900
Spt BSS Invoke Trace SendBssInvo Rpt[end2end user keTrace trace] BSC6900
SET OTHSOFTPAR A(Mandatory)
This parameter specifies whether the SI Type 3 message contains the System 2QUATER Information indicator. GBFD-111101 Sending Whether to report BSS INVOKE TRACE message. When the parameter is set to YES, the BSC sends a BSS INVOKE TRACE message to the MSC if receiving an MSC INVOKE TRACE or BSS INVOKE TRACE message from MSC in the case of an outgoing BSC handover. If the BSC does not receive the End-to-End MS message, Signaling the BSC GBFD-116401 Tracing
SENDCMAF Send Classmark TERINBSCH ENQ Result to O MSC Enabled
BSC6900
Whether to report the classmark queried by HUAWEI I SET the Handover GCELLSOFT(O BSC6900 GBFD-110601 HUAWEI II ptional) to the MSC GBFD-510501 Handover
SendConfusi Sent Confusion onToMSC Message to MSC BSC6900
Whether to send a CONFUSI ON message to the MSC. This parameter specifies whether to send a message carrying fault location information to the MSC if the BSC receives a message that cannot be SET decoded A Interface AITFOTHPARA( over the A Protocol Optional) interface. GBFD-111804 Process If this parameter is set to No, the BSC responds with an SAPI N'Reject message against the DL short message after hangup. GBFD-110203
SENDDOWN Send Downlink LINKMESSA Message after GE Hanging up
BSC6900
SENDFACC HNOTPRI
Send FACCH Notification Priority
BSC6900
Priority of the notification message transmissi on on the FACCH. From high to low, the priorities are A, B, 0, 1, 2, 3, 4 and No Priority. No Priority is the lowest. When the priority of the group call is higher than or equal to the value specified by this parameter, the notification message SET is sent on GCELLGSMR(O the Group Call ptional) FACCH. GBFD-510307 EMLPP
SENDFACC HPAGPRI
Send FACCH Paging Priority
BSC6900
Priority of the paging message transmissi on on the FACCH. From high to low, the priorities are A, B, 0, 1, 2, 3, 4 and No Priority. No Priority is the lowest. When the priority of the group call is higher than the value specified by this parameter, the paging message SET is sent on GCELLGSMR(O the Group Call ptional) FACCH. GBFD-510307 EMLPP SET The time BTSOTHPARA( for BTS Optional) reset. Multi-Carrier Intelligent Voltage GBFD-111612 Regulation
SENDSAMB BSC Auto Link E Flag
BSC6900
SENDSI2TE Send System RFLAG Information 2ter
BSC6900
Whether the BSC sends the System Information System Type 2ter Information message. GBFD-111101 Sending Whether the BSC sends the System Information System Type 5ter Information message. GBFD-111101 Sending
SENDSI5TE Send System RFLAG Information 5ter
BSC6900
SendUtranE CSCFlag
Send 3G Class Flag
BSC6900
Whether the SI Type 3 message contains the 3G Early Classmark Sending Restriction field. The 3G Early Classmark Sending Restriction field is used to notify the MS of whether the early classmark message contains the 3G classmark message. This parameter is valid for dual-mode MSs and is System invalid for Information singleGBFD-111101 Sending
SEPARATEP OS Separate Position BSC6900
Split SPT position on BTSRXUCHAIN the RXU (Mandatory) chain GBFD-111202 O&M of BTS
SEPERATE MODE
Separate Mode
BSC6900
ADD BTS(Optional)
Whether to enable the BTS to support the separation between the physical and logical. Whether the BTS supports the separate mode. When a BTS is in separate mode, the physical boards are separate from the logical TRXs, that is, a physical board may exist without being configured with any GBFD-111202 O&M of BTS
The Command SERCMDPO Port of FTP RT Server
BSC6900
Number of the command listening port of the server. You should not use any port number occupied SET by other FTPSSRV(Mand application atory) s. GBFD-111203 O&M of BSC
SERDATAP ORT
The Source Date Port of FTP Server BSC6900
Number of the data port of the server in active mode. You should not use any port number occupied SET by other FTPSSRV(Mand application atory) s. GBFD-111203 O&M of BSC Delivery serial ADD number of BTSRETANT(M the RET Remote andatory) antenna MRFD-210602 Electrical Tilt IP address of the FTP server to ADD be visited FTPSCLTDPOR by the FTP T(Mandatory) client GBFD-111203 O&M of BSC Service mode of the BSC6900. This parameter specifies SET configurati BSCBASIC(Opti on mode of GBFD-118602 A over IP onal) subracks. GBFD-113726 TC Pool Service bearer mode of the BTS
SERIALNO
Device Serial No. BSC6900
ServerIP
FTP Server IP Address
BSC6900
ServiceMode Service mode
BSC6900
SERVICEMO DE Service Type
BSC6900
ADD BTS(Optional)
GBFD-118601 Abis over IP
SERVICEMO DE Service Type
BSC6900
Service ADD bearer BTSAUTOPLAN mode of (Mandatory) the BTS
PICO Automatic Configuration GBFD-510601 and Planning
ServiceName Service Name
BSC6900
EXP LOG(Optional)
Name of the command function
O&M of BSC GBFD-111203 Security MRFD-210305 Management
SERVICETY PE Service Type
BSC6900
Service type of the BTS. The QoS processing depends on the DSCP, VLAN ID, and VLAN SET priority that BTSVLAN(Mand vary atory) according IMP to the BTSVLAN(Mand service atory) type. GBFD-118601 Abis over IP SET BTSAPMUBP(O ptional) SET BTSDPMUBP(O ptional) Whether to enable the diesel engine parameters to be configured GBFD-111202 O&M of BTS
SETDIESEL Diesel Engine ENGINEENA Configure BLED Enabled
BSC6900
SETENVPAR ENV TEMP CFG AENABLED Enabled BSC6900
Whether to enable the environme nt temperatur e alarm parameters of the APMU to be configured. The APMU of the APM30 type does not support this parameter. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond SET ing BTSAPMUBP(O parameter ptional) in another GBFD-111202 O&M of BTS
SETENVPAR ENV TEMP CFG AENABLED Enabled BSC6900
Whether to enable the environme nt temperatur e parameters to be configured. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS Whether to enable the environme nt humidity alarm parameters of the board to be configured. In multimode scenario, the value of this parameter in one mode must be the same as the value SET of the BTSAPMUBP(O correspond ptional) ing SET parameter BTSDPMUBP(O in another ptional) mode. GBFD-111202 O&M of BTS
Environment Humidity SETHUMPA Configure RAENABLED Enabled
BSC6900
SFPPORTN O
SFP Port No
BSC6900
Number of the SFP port. If the switching relation is added on the SFP port, it indicates that the SFP port is used to connect the BBU and no RXU chain or ring can ADD be BTSSFPMODE( configured Mandatory) on the port. GBFD-111202 O&M of BTS
SGSNCAP
Configure Capacity<K User Number> BSC6900
ADD Available SGSNNODE(Op capacity of tional) the SGSN GBFD-119701 SGSN Pool ADD SGSN(Mandator Name of Configuration y) the SGSN MRFD-210301 Management Length of the NRI(Netwo rk Resource Identifier) or NULLNRI. The length determines the maximum value of ADD the NRI GCNOPERATO and NULLR(Mandatory) NRI. GBFD-119701 SGSN Pool
SGSNNAME SGSN Name
BSC6900
SGSNNRILE SGSN NRI N Length
BSC6900
SGSNNULLN SGSN NullNRI RI Value
BSC6900
Special NRI(Netwo rk Resource Identifier). Each SGSN pool has one NULL-NRI. When the NRI value in the TLLI of the MS uplink/dow nlink service data equals NULL-NRI, the BSC6900 ADD reselects GCNOPERATO an SGSN R(Optional) for the MS. GBFD-119701 SGSN Pool
SGSNPOOL ALLOW Allow SGSN Pool BSC6900
Whether to enable the SGSN pool function. With SGSN pool, a BSC6900 is connected to multiple SGSNs in the pool, and load balancing and resource sharing between these SGSNs are allowed. In this manner, the PS services are processed by the SGSNs in ADD the SGSN GCNOPERATO pool in the R(Optional) most GBFD-119701 SGSN Pool Protocol version SET supported GCELLPSBASE by the (Optional) SGSN GBFD-114101 GPRS
SGSNR
Protocol Version Supported by SGSN
BSC6900
SGSN SGSNSTATU Management S Status
BSC6900
Administrat ive state of the SGSN. The value "ALLOW" indicates that the SGSN can handle the PS services normally. The value "UNISTAL L" indicates that the SGSN does not permit new PS services to access the network and the ongoing PS services are not affected. The value ADD "DENY" SGSNNODE(Op indicates tional) that the GBFD-119701 SGSN Pool Usage threshold of the CPU for call access from other CPU. If the usage of the CPU exceeds the threshold, the call SET access BSCFCPARA(O request is GSM Flow ptional) discarded. GBFD-111705 Control
SHAREINCP Share in CPU URATE Rate
BSC6900
SHARESN
Load Sharing Slot No. BSC6900
SHARINGAL LOW Sharing Allow
BSC6900
Slot number of the load ADD sharing ABISLOADSHA interface RE(Mandatory) board GBFD-111203 O&M of BSC SET Whether to BTSSHARING( allow Optional) sharing GBFD-118701 RAN Sharing SET Shield flag ALMSHLD(Man of the Faulty datory) alarm MRFD-210304 Management This parameter specifies the delay time before shutting down the TRXs when the BTS SET experience BTSBAKPWR(O s a power Active Backup ptional) failure. GBFD-111605 Power Control
SHLDFLG
Shield Flag
BSC6900
SHUTDOWN TRXSTARTT Shutdown TRX IME Start Time[T2]
BSC6900
SI2TerSwitch SI 2ter Switch
BSC6900
Whether the BSC sends a System Information Type 2ter message to a nondualband cell. When the parameter is set to YES, the cell does not send the System Information Type 2ter message if the cell is not configured with interfrequency neighborin g cells. If the cell is configured with interfrequency neighborin System g cells, the Information cell sends GBFD-111101 Sending
SIGCHANHO SDCCH HO EN Allowed
BSC6900
Whether to enable a handover HUAWEI I SET between Handover GCELLHOBASI signaling GBFD-110601 HUAWEI II C(Optional) channels GBFD-510501 Handover Number of times that the downlink signal strength ADD exceeds SoftAISSCFG(Optio the Synchronized nal) threshold GBFD-118201 Network
SIGLAST
Signal Strength Duration Times
BSC6900
SIGLKSX
Signalling link set index BSC6900
ADD MTP3RT(Manda tory) ADD MTP3LKS(Mand atory) ADD MTP3LNK(Mand atory) ADD M3RT(Mandator y) ADD M3LKS(Mandato ry) ADD M3LNK(Mandat ory)
Uniquely identifies a A Interface signaling Protocol link set GBFD-111804 Process
SIGLKSX
Signalling link set index BSC6900
Uniquely identifies a A Interface signaling Protocol link set GBFD-111804 Process
SIGLNKID
Signaling link ID
BSC6900
ID of an M3UA link ADD in the M3LNK(Mandat specified ory) link set GBFD-118602 A over IP
SIGLW
Signaling Load Weight
BSC6900
Signaling local weight over the local NSVL. When this parameter is set to a larger value, the NS is more likely to select this IP point according to the load sharing function of the NSVC link of the IP network, if the NS ADD sends a NSVLLOCAL(O signaling ptional) message. GBFD-118603 Gb over IP
SIGLW
Signaling Load Weight
BSC6900
Signaling local weight over the remote NSVL. When this parameter is set to a larger value, the NS is more likely to select this IP point according to the load sharing function of the NSVC link of the IP network, if the NS ADD sends a NSVLREMOTE( signaling Optional) message. GBFD-118603 Gb over IP Priority of the signaling SET service.0 is BSCSRVPRI(Op the highest tional) priority. GBFD-118605 IP QOS Number of times that the ADD downlink SoftAISSCFG(Optio signal is Synchronized nal) measured GBFD-118201 Network
SIGNALSP
Signal Service PRI
BSC6900
SIGOBS
Signal Strength Observation Times
BSC6900
SIGQUAFLT Filter Length for LEN SDCCH Qual
BSC6900
Number of measurem ent reports used for averaging the signal quality of signaling channels. This parameter helps avoid sharp drop of signal levels caused by Raileigh fading and to ensure HUAWEI I SET correct Handover GCELLHOFITP handover GBFD-110601 HUAWEI II EN(Optional) decisions. GBFD-510501 Handover A Interface ID of an Protocol MTP3 link Process ADD in a Local Multiple MTP3LNK(Mand specified GBFD-111804 Signaling atory) link set GBFD-115301 Points Number of measurem ent reports used for averaging the signal strength of signaling channels. This parameter helps avoid sharp drop of signal levels caused by Raileigh fading and to ensure HUAWEI I SET correct Handover GCELLHOFITP handover GBFD-110601 HUAWEI II EN(Optional) decisions. GBFD-510501 Handover
SIGSLC
Signalling link code
BSC6900
SIGSTRFLTL Filter Length for EN SDCCH Level
BSC6900
Interval Between SilenceTicks Resource OfResReq Request BSC6900
Minimum interval between the successful TBF establishm ent and the first initiation of the Packet Timeslot SET Reconfigur BSCPSSOFTPA ation RA(Optional) procedure GBFD-119303 Load Sharing Single pass exclude MSISDN number 1. One-way audio means that only one party in a call can hear the voice. Certain numbers, such as the premium rate number, are not used for the single pass check. The number is SET stored in BSCBASIC(Opti character onal) string. GBFD-111203 O&M of BSC
SinglePassE Single Pass xcludeMsisdn Exclude MSISDN 1 Number 1 BSC6900
Single pass exclude MSISDN number 10. Certain numbers, such as the premium rate number, are not used for the single pass check. The number is SET stored in BSCBASIC(Opti character onal) string. GBFD-111203 O&M of BSC Single pass exclude MSISDN number 11. Certain numbers, such as the premium rate number, are not used for the single pass check. The number is SET stored in BSCBASIC(Opti character onal) string. GBFD-111203 O&M of BSC
Single pass exclude MSISDN number 9. Certain numbers, such as the premium rate number, are not used for the single pass check. The number is SET stored in BSCBASIC(Opti character onal) string. GBFD-111203 O&M of BSC
SIPADDR
Source IP address
BSC6900
PING IP(Mandatory)
Source IP address
None
None
SIPADDR
Source IP address
BSC6900
TRC IPADDR(Option Source IP al) address
None
None
SITES
Sites
BSC6900
COL LOG(Optional)
Log of which site need to be collected. GBFD-111203 O&M of BSC
SITESYNCZ ONE Site Sync Zone
BSC6900
Zone where the BTS synchroniz es with other BTSs. Only two BTSs with the same synchroniz ation zone can be synchroniz SET ed in a SoftBTSAISS(Mand synchroniz Synchronized atory) ation task. GBFD-118201 Network The IP address must be a valid class A, B, or C address, and it cannot be a broadcast SET address or BTSIPCLKPAR network A(Mandatory) address. GBFD-118606 Clock over IP No. of the location group under the BTS. The location group No. ADD is unique BTSBINDLOCG for each RP(Mandatory) BTS.
SLAVEIPAD Clock Server IP DR Address 2
BSC6900
SLAVELOCG Sub-Location RPNO Group No.
BSC6900
GBFD-510104 Multi-site Cell
SLPTYPE
Self Loop Type
BSC6900
Self-loop type. The precaution s are as follows: 1. If the self-loop type is set to "E1SELFL OOP" and the BTS type is BTS3002C , BTS3001C , or BTS3001C P, the transmissi on board type can be set to only "Active TMU/MMU /IOMU/DO MU". If the BTS type is BTS3006C STR or TRANSPERFTS BTS3002E BTS Test T(Mandatory) , the GBFD-111207 Function
SLSMASK
Signalling route mask
BSC6900
Signaling route load sharing. In the value, the number of 1s (represent ed by n) determines the maximum number (2) of routes for the load sharing. For example, B0000 indicates that up to one route is used for the load sharing, B0001 and B1000 indicate that up to two routes are used for the load ADD sharing. A Interface N7DPC(Optional The Protocol ) additional GBFD-111804 Process
SLVSERVAC Slave Service TDELAY Active Delay
BSC6900
If no handshake message is received from the peer within the delay, the slave service is activated. A slave service object provides services at the peer BSC and its configurati on data is backed up at the local BSC. A slave service object provides services at the local BSC only when the SET peer BSC GBSCREDGRP( is faulty or BSC Node Optional) when all GBFD-113725 Redundancy
SM
StartType
BSC6900
SET TZ(Mandatory)
Type of the start date. "WEEK" indicates that the start date is a weekday. "DATE" indicates that the start date is a month day. "DATEWE EK" indicates the start date is expressed by a combinatio Support of n of Daylight weekday Saving Time and month GBFD-116101 Configuration day. MRFD-210301 Management
SMLCIDX
SMLC Index
BSC6900
ADD GEXTSMLC(Ma Index of ndatory) the SMLC None
None
SMLCMode
SMLC Mode
BSC6900
SMOKE_MA Enable Smoke SK Alarm Reporting
BSC6900
Whether the built-in SMLC or external ADD SMLC is GEXTSMLC(Ma used in the ndatory) BSS. None None Smog ADD alarm Faulty EMU(Optional) switch MRFD-210304 Management
SMONTH
Start month
BSC6900
SET TZ(Mandatory)
Support of Daylight Month in Saving Time which DST GBFD-116101 Configuration starts MRFD-210301 Management
SMWINDOW Filter window
BSC6900
SN
Slot No.
BSC6900
SN
Slot No.
BSC6900
Number of CPU usage samples involved in the calculation SET of the FCCPUTHD(Opt average ional) CPU SET usage in FCMSGQTHD( the sliding Optional) window WRFD-040100 SWP BRD(Mandatory) STR BKP(Mandatory) CMP BRDAREA(Opti onal) ULD RSTINFO(Mand atory) SET CLK(Mandatory) UPD JTGCPLD(Mand atory) SET XPUPORT(Man datory) ADD XPUVLAN(Mand atory) SET MPUBIND(Mand atory) SET DPUBRDTYPE( Mandatory) SET TCTYPE(Manda tory) ADD BRD(Mandatory) LOD Number of BRD(Optional) the slot MRFD-210301 DLD TCFILE(Mandat Number of ory) the slot MRFD-210301
Flow Control
SN
Slot No.
BSC6900
ADD MTP3LNK(Optio nal) ADD SCTPLNK(Mand atory)
Number of the slot where the XPU board is located None
None
SN
Slot No.
BSC6900
Number of the slot ADD where the M3LNK(Mandat XPU board ory) is located GBFD-118602 A over IP SET PHBMAP(Mand atory) ADD ATERE1T1(Man datory) ADD AE1T1(Mandato Number of ry) the slot None
SN
Slot No
BSC6900
None
SN
BM Slot No
BSC6900
A key field used to identify the Ater timeslot and indicate the number BLK of the Ater ATERE1T1(Man interface datory) timeslot None
None
SN
Slot No.
BSC6900
BLK AE1T1(Mandato ry) ADD PBE1T1(Mandat Number of ory) the slot GBFD-111203 O&M of BSC EXP ALMLOG(Option al) STA ALMLOG(Option al) Number of the slot where the alarm is Faulty generated MRFD-210304 Management
SN
Slot No.
BSC6900
SN
Slot No.
BSC6900
Number of the slot where the alarm is generated, the number of the slot where the OMU board is ADD positioned OBJALMSHLD( is not Faulty Optional) supported MRFD-210304 Management
SN
Slot No.
BSC6900
SET E1T1LOP(Mand atory) LOP E1T1(Mandatory ) STR E1T1TST(Mand atory) SET OPTLOP(Manda tory) PING IP(Mandatory) TRC IPADDR(Mandat ory) SET QUEUEMAP(Ma ndatory) SET E1T1(Mandatory ) ADD TSCROSS(Man datory) ADD DEVIP(Mandato ry) ADD IPRT(Mandatory ) SET OPT(Mandatory) SWP ETHPORT(Man datory) ADD ETHREDPORT( Mandatory) ADD GCBSADDR(Ma ndatory) SET TCPLYVOICE(M andatory) SET TCPARA(Manda tory)
Indicates the slot number for running this command None Slot number for running this command None
None
SN
Main Board Logic slot No. BSC6900
None
SN
Slot No.
BSC6900
Number of the slot. The subrack number and slot number uniquely identify a Configuration board. MRFD-210301 Management
SN
Slot No.
BSC6900
SN
Slot No.
BSC6900
Slot No. of the subsystem where the Iur-g common connection ADD is GIURGCONN(M establishe MBSC Load andatory) d MRFD-211402 Balancing ADD TRXBIND2PHY BRD(Mandatory) SWP BTSRING(Optio nal) SWP BTSOMLLINK(O ptional) SET BTSFMUABP(M andatory) SET BTSNFCBBP(M andatory) SET BTSPMUBP(Ma ndatory) SET BTSAPMUBP(M andatory) SET BTSDATUBP(M andatory) SET BTSDEMUBP(M andatory) SET BTSDFCUBP(M andatory) Number of SET the slot BTSDHEUBP(M where the andatory) BTS board SET is located GBFD-111202 O&M of BTS ADD BTSBFD(Option al) ADD BTSIPRTBIND( Optional) Number of the slot where the IP Fault BTS board Detection is located GBFD-118609 Based on BFD
SN
Slot No.
BSC6900
SN
Slot No.
BSC6900
Slot number of the XPU board ADD bound to Configuration NSE(Mandatory) the NSE MRFD-210301 Management Slot number of board to which Pb ADD signaling PBSL(Mandator link y) belongs GBFD-111203 O&M of BSC ADD BTSSFPMODE( Optional) SET BTSFORBIDTS( Optional) SET BTSOMLTS(Opt ional) SET BTSETHPORT( Optional) ADD BTSPPPLNK(O ptional) ADD BTSMPLNK(Opt ional) ADD BTSETHMA(Opt ional) ADD BTSETHLCMEP (Optional) ADD BTSTOPCONFI G(Optional) IMP BTSPPPLNK(O ptional) IMP BTSMPLNK(Opt ional)
SN
Slot No.
BSC6900
SN
Port Slot No.
BSC6900
Number of the slot where the port is located GBFD-111202 O&M of BTS
SN
Slot No.
BSC6900
Slot number of the BSC6900 board that ADD is BTSCONNECT( connected Mandatory) to the BTS GBFD-111202 O&M of BTS
SN
Slot No.
BSC6900
SNDMD
Send Mode
BSC6900
Number of the slot OPR where the BTSBRDPWR( BTS board Mandatory) is located. GBFD-111202 O&M of BTS RF send mode of the TRX. The BTS3006C and BTS3002E do not support Wide Band Combining , Power Booster Technolog y, DPBT, or Transmitte r Independe nt or Combining . The DBS3900 GSM GRRU does not support Wide Band Combining , SET Transmitte GTRXDEV(Opti r Configuration onal) Independe MRFD-210301 Management
DRRU Sending SndRcvMode Receiving Mode
BSC6900
The connection mode between SET the DRRU BTSRXUBP(Opt and the ional) antenna. GBFD-111202 O&M of BTS
SndRcvMode DRFU Sending 1 Receiving Mode
BSC6900
The connection mode between SET the DRFU BTSRXUBP(Opt and the ional) antenna. GBFD-111202 O&M of BTS
MRRU/GRRU SndRcvMode Sending 2 Receiving Mode
BSC6900
The connection mode between the MRRU/GR SET RU and BTSRXUBP(Opt the ional) antenna. GBFD-111202 O&M of BTS
MRFU/GRFU SndRcvMode Sending 3 Receiving Mode
BSC6900
The connection mode between the SET MRFU/GR BTSRXUBP(Opt FU and the ional) antenna. GBFD-111202 O&M of BTS
BTS3900E SndRcvMode Sending 4 Receiving Mode
BSC6900
The connection mode between the SET BTS3900E BTSRXUBP(Opt and the ional) antenna. GBFD-111202 O&M of BTS Synchroniz ation period of SET the SNTP SNTPCLTPARA client (Mandatory) service GBFD-111203 O&M of BSC As an integer, the OSP code can be expressed by a decimal digit or a hexadecim al digit. If the OSP code is expressed by a 14-Digit hexadecim Signaling Point al digit, H' Code is added A Interface before the GBFD-111802 Protocol number. GBFD-111804 Process
SP
Sync Period
BSC6900
SPC
OSP code[Whole Number] BSC6900
ADD OPC(Optional)
SPCBITS
OSP code bits
BSC6900
Number of 14-Digit bits Signaling Point contained Code ADD in the A Interface OPC(Mandatory signaling GBFD-111802 Protocol ) point code GBFD-111804 Process
SPCDNF
OSP code[Divided Number]
BSC6900
ADD OPC(Optional)
OSP code expressed in the form of segments 8-8-8, see the parameter 14-Digit "Signal Signaling Point point data Code format" of A Interface the "ADD GBFD-111802 Protocol OPC" GBFD-111804 Process
SPCIC
Start PCIC
BSC6900
SPDF
Signal point data format BSC6900
Start CIC of the ADD E1/T1 of PBE1T1(Mandat the Pb ory) interface GBFD-111203 O&M of BSC Data format of the specified signaling point. When this parameter is set to "WNF", the SPC is expressed in the form of an integer number. When this parameter is set to "NDF", the SPC is expressed in three segments. The number of bits included in each ADD segment OPC(Optional) depends ADD on the A Interface N7DPC(Optional setting of Protocol ) the GBFD-111804 Process
SPECACC
Special Access Control Class
BSC6900
This parameter is used for load control. It determines whether the users of special access class are allowed to access the network. Value 1 indicates that access is not Radio allowed. Common Value 0 Channel indicates Management SET that GBFD-111003 Location GCELLCCBASI access is GBFD-110301 Updating C(Optional) allowed. GBFD-110302 IMSI Detach
SPECIALSW Special Alarm ITCH Switch
BSC6900
The value of this parameter consists of seven bits. Each bit determines whether to enable the one-way Boolean alarm. "0" indicates that the one-way Boolean alarm is enabled, and "1" indicates that the one-way Boolean alarm is disabled. In multimode scenario, the value of this parameter SET in one BTSFMUABP(O mode must Faulty ptional) be the MRFD-210304 Management
SPECIALSW Special Alarm ITCHERLEV Valid Level EL Configuration
BSC6900
The value of this parameter consists of five bits. Each bit determines whether the oneway Boolean alarm is triggered by low level or high level. "0" indicates that the alarm is triggered by high level, and "1" indicates that the alarm is triggered by low level. In multiSET mode BTSFMUABP(O scenario, Faulty ptional) the value MRFD-210304 Management If the number of one-way mute events exceeds the value of "Speech Channel Alarm Threshold" within this period, then the BSC reports the SET Speech BSCBASIC(Opti Channel Voice Fault onal) alarm. GBFD-119301 Diagnosis
One-Way Mute SpeechAlmP Alarm Reporting eriod Period
BSC6900
Speech VER SpeechVerIn Send Flag in ASS AssCmp CMP BSC6900
Whether to contain the information element of Speech_V er in the SET Assignmen A Interface MSGSOFTPAR t Complete Protocol A(Optional) message GBFD-111804 Process
Speech VER SpeechVerin Send Flag in HO HoPerform Perform
BSC6900
Whether to contain the information element of Speech_V er in the SET Handover A Interface MSGSOFTPAR Perform Protocol A(Optional) message GBFD-111804 Process
SpeechVerSend SpeechVerIn Flag in HO REQ HoReqAck ACK
BSC6900
Whether to contain the information element of Speech_V er in the SET HO_REQ_ A Interface MSGSOFTPAR ACK Protocol A(Optional) message GBFD-111804 Process
SpeechVerIn HO_RQD Speech HoRqd VER BSC6900
Whether to contain the information element of Speech SET Ver in the A Interface MSGSOFTPAR HO_RQD Protocol A(Optional) message GBFD-111804 Process
SPEECHVE RMODE1
Speech Version Mode 1
BSC6900
Speech version mode that the BTS uses for the VGCS call number in the timeslot in SET the TRX in Group Call BTSCHNFALLB fallback Reliability ACK(Mandatory) mode GBFD-510309 Enhancing
SPEECHVE RMODE2
Speech Version Mode 2
BSC6900
Speech version mode that the BTS uses for the VGCS call number in the timeslot in SET the TRX in Group Call BTSCHNFALLB fallback Reliability ACK(Mandatory) mode GBFD-510309 Enhancing
SPEECHVE RSION
Speech Version
BSC6900
Speech version configured on the TRX timeslot when the BTS works in fallback mode. When "CHNTYP E" of the TRX timeslot is set to "FULLTCH ", value 0 of this parameter indicates FR and value 1 indicates EFR; when "CHNTYP E" of the TRX timeslot is set to "HALFRC SET H", this Group Call BTSCHNFALLB parameter Reliability ACK(Mandatory) is invalid. GBFD-510309 Enhancing
SPEED
ETHPORT SPEED
BSC6900
Rate over the GE electrical port. When this parameter is set to 1000M, the GE electrical port performs negotiation at the rate of 1000 Mbit/s. If, however, the negotiation result is not 1000 Mbit/s, the negotiation fails. When this parameter is set to AUTO, the GE electrical port SET performs ETHPORT(Opti auto onal) negotiation None
None
SPEEDPUNI Penalty on MS SH Fast Moving HO
BSC6900
Level value of the penalty that is performed on the neighborin g cells of the cell where a fastmoving MS is located. The neighborin g cells must be located at the Macro, Micro, or Pico layer other than HUAWEI I SET the Handover GCELLHOAD(O Umbrella GBFD-110601 HUAWEI II ptional) layer. GBFD-510501 Handover Period in which penalty is performed on the neighborin g cells of the cell where a fastmoving MS is located. The neighborin g cells must be located at the Macro, Micro, or Pico layer HUAWEI I SET but not the Handover GCELLHOAD(O Umbrella GBFD-110601 HUAWEI II ptional) layer. GBFD-510501 Handover
SPEEDPUNI Penalty Time on SHT Fast Moving HO
BSC6900
Support SPGCCCCH SPLIT_PG_CYCL SUP E on CCCH BSC6900
Whether to support SPLIT_PG _CYCLE on CCCH. The parameter SPLIT_PG _CYCLE is used to define the DRX period. You can specify whether the paging group based on SPLIT_PG _CYCLE is supported on CCCH for the BTS and the MS. Yes: the paging group System based on Information SPLIT_PG Sending SET _CYCLE is Discontinuous GCELLPSBASE supported GBFD-111101 Reception (Optional) on CCCH. GBFD-114802 (DRX)
SpprtCB
Support Cell Broadcast
BSC6900
This parameter specifies whether the BSC6900 supports the cell broadcast function and whether the BSC6900 supports simple cell broadcast or standard cell broadcast. If the BSC6900 supports standard cell broadcast, the BSC6900 should be ADD connected GCNOPERATO to the R(Optional) CBC. GBFD-113601
Allow Common SPTCOMMM Measurement at EAS Iur-g
BSC6900
Whether to support the common bidirection al measurem ent ADD procedure GNRNC(Optiona on the IurMBSC Load l) g interface. MRFD-211402 Balancing Whether to support the bidirection al information exchange ADD procedure GNRNC(Optiona on the IurMBSC Load l) g interface. MRFD-211402 Balancing
SPTINFOEX Allow Info CHG Exchange at Iur-g BSC6900
SPTINTERR Support In InterATINBSCPS RAT Inter-cell PS HO Handover BSC6900
Whether to support In Inter-RAT Inter-cell PS Handover. The MS in the UMTS cell can be handed over to the BSC local cell SET through PS GCELLGPRS(O handover ptional) algorithm. GBFD-119502 PS Handover Whether support Out InterRAT InterCell PS Handover. The MS in the BSC local cell can be handed over to the UMTS cell SET through PS GCELLGPRS(O handover ptional) algorithm. GBFD-119502 PS Handover
SPTINTERR Support Out InterATOUTBSCP RAT Inter-Cell PS SHO Handover BSC6900
Support NACC SPTNACCRe Resource sGuarantee Guarantee
BSC6900
Whether the function of Network Assisted Cell Change (NACC) resource guarantee is allowed. In NC2 or NACC cell reselection , if this parameter is set to YES, dynamic channels are SET requested BSCPSSOFTPA in the RA(Optional) target cell. GBFD-116301
Network Assisted Cell Change (NACC)
SptPaging
Support Paging Message from Trunking MSC
BSC6900
Whether the BSC forwards the paging message from the trunking MSC to the MS. When this parameter is set to YES, the BSC forwards the paging message from the trunking MSC to the MS and forwards the correspond ing paging response from the ADD MS to the Public Voice GCNNODE(Opti trunking Group Call onal) MSC. GBFD-510301 Service
SptPbLapdC Support Pb Lapd heck Check BSC6900
Whether to enable the layer 3 check mechanis m on the LAPD links. If the PCU_BSC _LAPD_C HECK_AC K message cannot be received on one Pb link, the Pb link is in single pass mode. Send another two PCU_BSC _LAPD_C HECK_AC K messages. If the PCU_BSC _LAPD_C HECK_AC K message is still not received GBFD-114101 GPRS
SptPbResCh Support Pb eck Resource Check
BSC6900
Whether to enable the enhanced resource check on the Pb interface. The introductio n of enhanced resource check is to improve the efficiency of resource checking and define the dependenc ies of resource status. The external PCU initiates the enhanced resource check. The resources GBFD-114101 GPRS
Support Pb SptPbSglPas Single Pass sCheck Check
BSC6900
Whether to enable the single pass check function on the Pb links between the BSC and the external PCU. When the Pb link is in single pass mode, a correspond ing alarm is reported to the maintenan ce terminal, and the Pb link is set to broken link state or the priority of the Pb link is lowered. GBFD-114101 GPRS
SptPCICChe Support PCIC ck Check
BSC6900
Whether to enable the PCIC check function on the Pb links between the BSC and the external PCU. When the configurati on of the PCIC of the BSC is inconsisten t with that of the external PCU, a correspond ing alarm is reported to the maintenan ce terminal, the Pb interface circuit with inconsisten t GBFD-114101 GPRS
SptRanShari Support RAN ng Sharing
BSC6900
Whether to support RAN Sharing.R AN sharing refers to the technique that the GBSS equipment is categorize d into multiple logical GBSS equipment, thus operators can share the GBSS equipment SET to cover BSCBASIC(Opti the same onal) area. GBFD-118701 RAN Sharing Cell supports reduced latency capability. This parameter is used to reduce the latency during the transmissi on, thus improving the user experience for SET conversati GCELLGPRS(O onal Latency ptional) services. GBFD-510805 Reduction
Support Reduced SPTREDUC Latency ELATENCY Capability BSC6900
SPTSHARIN RanSharing G Support
BSC6900
whether the main operator enables the RanSharin g function. If the RanSharin g function is enabled, one to three cooperators can be SET configured BTSRXUBP(Opt to share ional) the BSS. GBFD-118701 RAN Sharing Whether the FTP client SET supports FTPSCLT(Optio the state nal) firewall ADD OPC(Mandatory ) ADD N7DPC(Mandat ory) ADD Uniquely M3LE(Mandator identifies y) an OSP
SPTSTATEF Support State WL Firewall
BSC6900
SPX
OSP index
BSC6900
A Interface Protocol GBFD-111804 Process
Is Support Normalized Data SRANMODE Configuration BSC6900
Whether a base station supports normalized data configurati on. Normalized data configurati on means that the cabinets, subracks, slots, transmissi on ports, and userdefined alarm ports of a base station under a multi-mode BSC use the same numbering schemes, and that the boards of the base ADD station are BTS(Mandatory) uniformly GBFD-111202 O&M of BTS
Is Support SRANMODE SingleRAN Mode BSC6900
Whether the data configurati on of the SingleRAN BTS supports normalized SingleRAN mode. Normalized SingleRAN mode means that the rules of defining cabinet number, subrack number, and slot number of the SingleRAN ADD BTS are BTSAUTOPLAN normalized (Mandatory) . GBFD-111202 O&M of BTS
Is Support SRANMODE SingleRAN Mode BSC6900
Whether the data configurati on of the SingleRAN BTS supports normalized SingleRAN mode. Normalized SingleRAN mode means that the rules of defining cabinet number, subrack number, and slot number of the SingleRAN ADD BTS are BTSCABINET(O normalized ptional) . GBFD-111202 O&M of BTS A cell Index must be unique ADD in one G2GNCELL(Ma BSC6900 ndatory) . It is used HUAWEI I ADD to uniquely Handover GIBCAPNCGRP identify a GBFD-110601 HUAWEI II (Mandatory) cell. GBFD-510501 Handover ADD G2GNCELL(Ma ndatory) ADD GIBCAPNCGRP Name of a Configuration (Mandatory) cell MRFD-210301 Management
SRC2GNCEL LID Source Cell Index BSC6900
SRC2GNCEL Source Cell LNAME Name
BSC6900
SRC3GNCEL LID Source Cell Index BSC6900 SRC3GNCEL Source Cell LNAME Name
BSC6900
SRCCI
Source Cell CI
BSC6900
A source cell index must be unique in one BSC. It is used to uniquely identify a source cell. The value of this parameter ADD ranges G3GNCELL(Ma from 0 to ndatory) 2047. MRFD-210301 ADD G3GNCELL(Ma Name of a ndatory) source cell MRFD-210301 ADD G2GNCELL(Ma Source cell ndatory) ID MRFD-210301
Configuration Management Configuration Management Configuration Management
SRCF
Source File Name BSC6900
The batch file to be executed: The content of the batch file consists of service commands to be executed in batches. The source file is located in the FTP subdirector y of the OMU installation directory, and you should not add the path when entering the name. The characters (@, #, !, RUN %, ^, &, *, BATCHFILE(Ma /, ., [, ], \, :, ndatory) ?, ', ", <, >, GBFD-111203 O&M of BSC
SRCGRD
Clock source priority
BSC6900
SET Priority of CLKMODE(Man the clock datory) source
SRCGRD
Clock source priority
BSC6900
Priority of the clock source. There are four priorities (in ADD descendin CLKSRC(Manda g order): 1, BSC/RNC tory) 2, 3, 4. MRFD-210502 Clock
Current HO CTRL SRCHOCTR Algorithm in LSWITCH Source Cell BSC6900
Whether the currently used handover algorithm in the source cell is HO Algorithm I HUAWEI I ADD or HO Handover G2GNCELL(Opti Algorithm GBFD-110601 HUAWEI II onal) II GBFD-510501 Handover Source IP ADD address of IP Fault BTSBFD(Manda BFD Detection tory) Session. Local area GBFD-118609 Based on BFD code ADD (LAC) of G2GNCELL(Ma the source Configuration ndatory) cell MRFD-210301 Management Mobile country code ADD (MCC) of G2GNCELL(Ma the source Configuration ndatory) cell MRFD-210301 Management PING MAC(Mandatory ) TRC MAC(Mandatory ) Identifies a maintenan ce point in the maintenan ce group None
SRCIP
Source IP Address
BSC6900
SRCLAC
Source Cell LAC
BSC6900
SRCMCC
Source Cell MCC BSC6900
SRCMEPID
MEP ID
BSC6900
None
SRCMNC
Source Cell MNC BSC6900
Mobile network code ADD (MNC) of G2GNCELL(Ma the source Configuration ndatory) cell MRFD-210301 Management ADD Source of TSCROSS(Man timeslot datory) cross
SRCPORTN O Source port No.
BSC6900
None
None
SRCT
Clock source type BSC6900
ADD Type of the CLKSRC(Manda clock BSC/RNC tory) source. MRFD-210502 Clock
SRCTSMAS Source timeslot K mask
BSC6900
ADD Source TSCROSS(Man timeslot datory) mask
None
None
SRN
Subrack No.
BSC6900
SWP BRD(Mandatory) STR BKP(Mandatory) CMP BRDAREA(Opti onal) ULD LOGTOOMU(M andatory) ULD RSTINFO(Mand atory) SET PWRALMSW(M andatory) SET PWRPARA(Man datory) SET FANSPEED(Ma ndatory) SET SCUPORT(Man datory) UPD JTGCPLD(Mand atory) ADD EMU(Mandatory ) SET Number of ALMPORT(Man the Configuration datory) subrack MRFD-210301 Management ADD SUBRACK(Man datory) Number of SET the Configuration CLK(Mandatory) subrack MRFD-210301 Management ADD MTP3LNK(Optio nal) ADD SCTPLNK(Mand atory) Number of the subrack where the XPU board is located None
SRN
Subrack No.
BSC6900
SRN
Subrack No.
BSC6900
None
SRN
Subrack No.
BSC6900
ADD RSCGRP(Mand atory) SET PHBMAP(Mand atory) ADD ATERE1T1(Man datory) ADD AE1T1(Mandato ry) BLK AE1T1(Mandato ry) ADD ABISLOADSHA RE(Mandatory) ADD Number of PBE1T1(Mandat the ory) subrack None
None
SRN
Subrack No.
BSC6900
ADD Number of M3LNK(Mandat the ory) subrack GBFD-118602 A over IP
SRN
BM Subrack No
BSC6900
SRN
Subrack No
BSC6900
It is one key field of identifying the Ater timeslot and indicates the subrack No. of the BLK Ater ATERE1T1(Man interface datory) timeslot. None Number of COL the LOG(Optional) subrack None EXP ALMLOG(Option al) STA ALMLOG(Option al) ADD OBJALMSHLD( Mandatory)
None
None
SRN
Subrack No.
BSC6900
Number of the subrack where the indicator alarm to be queried is Faulty generated MRFD-210304 Management
SRN
Subrack No.
BSC6900
ADD ETHMD(Mandat ory) ADD ETHTRK(Manda tory) ADD ETHTRKLNK(M andatory) ADD ETHTRKIP(Man datory) STR ETHMIRRORP ORT(Mandatory) ADD GCBSADDR(Ma ndatory) SET TCPLYVOICE(M andatory) SET TCPARA(Manda tory)
The subrack number for running this command None
None
SRN
Subrack No.
BSC6900
The subrack number uniquely identifies a Configuration subrack. MRFD-210301 Management
SRN
Subrack No.
BSC6900
Subrack No. of the subsystem where the Iur-g common connection ADD is GIURGCONN(M establishe MBSC Load andatory) d MRFD-211402 Balancing
SRN
Subrack No.
BSC6900
ADD TRXBIND2PHY BRD(Mandatory) SWP BTSRING(Optio nal) SWP BTSOMLLINK(O ptional) SET BTSFMUABP(M andatory) SET BTSNFCBBP(M andatory) SET BTSPMUBP(Ma ndatory) SET BTSAPMUBP(M andatory) SET BTSDATUBP(M andatory) SET BTSDEMUBP(M andatory) SET BTSDFCUBP(M andatory) SET BTSDHEUBP(M andatory) SET ADD BTSBFD(Option al) ADD BTSIPRTBIND( Optional)
Number of the subrack where the BTS board is located GBFD-111202 O&M of BTS Number of the subrack where the IP Fault BTS board Detection is located GBFD-118609 Based on BFD
SRN
Subrack No.
BSC6900
SRN
Subrack No.
BSC6900
Subrack number of the XPU board ADD bound to Configuration NSE(Mandatory) the NSE MRFD-210301 Management Subrack number of board to which Pb ADD signaling PBSL(Mandator link y) belongs GBFD-111203 O&M of BSC
SRN
Subrack No.
BSC6900
SRN
Port Subrack No. BSC6900
ADD BTSSFPMODE( Optional) SET BTSFORBIDTS( Optional) SET BTSOMLTS(Opt ional) SET BTSETHPORT( Optional) ADD BTSPPPLNK(O ptional) ADD BTSMPLNK(Opt ional) ADD BTSETHMA(Opt ional) ADD BTSETHLCMEP (Optional) ADD BTSTOPCONFI G(Optional) IMP BTSPPPLNK(O ptional) IMP BTSMPLNK(Opt ional)
Number of the subrack where the port is located GBFD-111202 O&M of BTS
SRN
Subrack No.
BSC6900
Subrack number of the BSC6900 board that ADD is BTSCONNECT( connected Mandatory) to the BTS GBFD-111202 O&M of BTS Number of the subrack where the BTS board is located GBFD-111202 O&M of BTS
SRN
Subrack No.
BSC6900
OPR BTSBRDPWR( Mandatory)
SRN1
Subrack 1 No
BSC6900
Number of the subrack at one end of the interADD subrack SRCONPATH(M connection andatory) channel GBFD-111203 O&M of BSC
SRN2
Subrack 2 No
BSC6900
Number of the subrack at the other end of the interADD subrack SRCONPATH(M connection andatory) channel GBFD-111203 O&M of BSC ADD SUBRACK(Man datory) SET BTSTMA(Manda tory) Name of the subrack to Configuration be added MRFD-210301 Management Number of the tributary GBFD-111202 O&M of BTS
SRName
Subrack name
BSC6900
SRNO
Tributary No.
BSC6900
SRT
Subrack type
BSC6900
SRTORD
Sort Order
BSC6900
SET CLK(Mandatory) EXP ALMLOG(Option al)
Type of the BSC/RNC subrack MRFD-210502 Clock Sequence of alarm Faulty records MRFD-210304 Management
SRVLW
User Data Load Weight
BSC6900
Traffic local weight over the local NSVL. When this parameter is set to a large value, the NS is more likely to select this IP point according to the load sharing function of the NSVC link of the IP network, if the NS ADD sends a NSVLLOCAL(O data ptional) message. GBFD-118603 Gb over IP Traffic local weight over the remote NSVL. When this parameter is set to a larger value, the NS is more likely to select this IP point according to the load sharing function of the NSVC link of the IP network, if the NS ADD sends a NSVLREMOTE( data Optional) message. GBFD-118603 Gb over IP
SRVLW
User Data Load Weight
BSC6900
SRVPRIPOLI Service Priority CY Policy
BSC6900
SRVTYPE
Service Type
BSC6900
The parameter specifies which type of service TRXs should be preferential ly O&M of BTS processed Intelligent SET when the Shutdown of BTSPSUFP(Opti PSU is GBFD-111202 TRX Due to onal) faulty. GBFD-117804 PSU Failure Service type of the IP interface board. The service type can be CS speech, CS data, ADD PS high BTSABISMUXF priority, or LOW(Mandatory PS low ) priority. GBFD-118605 IP QOS
SSBQPUNIS Penalty Level H after BQ HO
BSC6900
After a handover due to bad quality is successful, the penalty on the original serving cell is performed within the "Penalty Time after BQ HO": the receive level of the original serving cell is decreased by "Penalty Level after BQ HO", to HUAWEI I SET prevent Handover GCELLHOFITP ping-pong GBFD-110601 HUAWEI II EN(Optional) handovers. GBFD-510501 Handover CPU usage SET alarm CPUTHD(Option clearance al) threshold
SSCPUAVE CPU occupancy USAGEALM alarm clearance THD threshold
BSC6900
SSCPUMAX USAGEALM CPU occupancy THD alarm threshold
BSC6900
CPU usage alarm threshold. When the CPU usage exceeds the threshold, a CPU usage alarm is reported. "CPU occupancy alarm clearance threshold" is smaller than "CPU SET occupancy CPUTHD(Option alarm Faulty al) threshold". MRFD-210304 Management DSP usage alarm clearance threshold. When the DSP usage is lower than the threshold, the DSP SET usage CPUTHD(Option alarm is Faulty al) cleared. MRFD-210304 Management
SSDSPAVEU DSP occupancy SAGEALMT alarm clearance HD threshold
BSC6900
SSDSPMAX USAGEALM DSP occupancy THD alarm threshold
BSC6900
DSP usage alarm threshold. When the DSP usage exceeds the threshold, a DSP usage alarm is reported. "DSP occupancy alarm clearance threshold" is smaller than "DSP SET occupancy CPUTHD(Option alarm Faulty al) threshold". MRFD-210304 Management
SSLENSD
Filter Length for TCH Level
BSC6900
When the network receives measurem ent reports, the measurem ent values in several straight measurem ent reports are filtered to reflect the radio operating environme nt for the sake of accuracy. This parameter specifies the number of successive measurem ent reports that are used to determine HUAWEI I SET the signal Handover GCELLCHMGA strength on GBFD-110601 HUAWEI II D(Optional) traffic/data GBFD-510501 Handover
SSLENSI
Filter Length for SDCCH Level
BSC6900
When the network receives measurem ent reports, the measurem ent values in several straight measurem ent reports are filtered to reflect the radio operating environme nt for the sake of accuracy. The parameter specifies the number of successive measurem ent reports that are used to determine HUAWEI I SET the signal Handover GCELLCHMGA strength on GBFD-110601 HUAWEI II D(Optional) signaling GBFD-510501 Handover STR BKP(Optional) ULD RSTINFO(Mand atory) ADD XPUVLAN(Mand atory) LOD BRD(Optional) CMP Number of TBLDATA(Mand the Configuration atory) subsystem MRFD-210301 Management
SSN
Subsystem No.
BSC6900
SSN
Subsystem No.
BSC6900
No. of the subsystem where the Iur-g common connection ADD is GIURGCONN(M establishe MBSC Load andatory) d MRFD-211402 Balancing Start synchroniz ation EXP number of ALMLOG(Option the alarm Faulty al) record MRFD-210304 Management After the time advancing handover is successful, the penalty on the original serving cell is performed within the "Penalty Time after TA HO": the receive level of the original serving cell is decreased by "Penalty Level after TA HO", to HUAWEI I SET prevent Handover GCELLHOFITP ping-pong GBFD-110601 HUAWEI II EN(Optional) handovers. GBFD-510501 Handover Support of Daylight Saving Time GBFD-116101 Configuration MRFD-210301 Management
SSSN
Start Sync Serial No. BSC6900
SSTAPUNIS Penalty Level H after TA HO
BSC6900
ST
StartTime
BSC6900
SET TZ(Mandatory)
Start of DST
ST
Start Time
BSC6900
EXP LOG(Optional)
The operation time of the log record should be after this time. If this parameter is not specified, the start time is not limited. GBFD-111203 O&M of BSC
ST
Start Time
BSC6900
If the time mode is set to "DAILY_T", "WEEKLY _T", or "MONTHL Y_T", you ADD should set SUBTSK(Manda this tory) parameter. GBFD-111203 O&M of BSC The operation time of the log record should be after this time. If this parameter is not specified, the start O&M of BSC time is not GBFD-111203 Security limited. MRFD-210305 Management
ST
Start Time
BSC6900
COL LOG(Optional)
ST
Start Time
BSC6900
Start time of the alarm record. By default, the EXP start time ALMLOG(Option is Faulty al) 00:00:00. MRFD-210304 Management Start time of the alarm record. By default, the STA start time ALMLOG(Option is Faulty al) 00:00:00. MRFD-210304 Management
ST
Start Time
BSC6900
ST
Start Time
BSC6900
A key parameter that indicates the date and time when the BSC6900 ADD broadcasts GSMSCB(Mand cell Simplified Cell atory) messages GBFD-113602 Broadcast EXP ALMLOG(Option al) STA ALMLOG(Option al)
STARTAID
Start Alarm ID
BSC6900
Start number of the alarm Faulty record MRFD-210304 Management
STARTCBSH ORTMSGFL Prefer Variable OWCTRL Bitmap Code
BSC6900
Whether to preferential ly use the variable bitmap code when encoding the frequency in the System Information and encoding the FH frequency in the assignmen SET t or BSCFCPARA(O handover ptional) command GBFD-113701
STARTCHRE QARRIVALC CHAN REQ TRL Arrival Control
BSC6900
This parameter indicates whether the arrival of channel request SET messages BSCFCPARA(O is GSM Flow ptional) controlled. GBFD-111705 Control It indicates the start CIC of the A interface CIC segment. When operation mode is set to OPC index, DPC group index, BSC ID, or CIC, the BLK parameter A Interface ACIC(Mandatory is Circuit ) mandatory. GBFD-111803 Management It indicates the start CIC of the Pb interface CIC segment. If the search object mode is set to search by the specified range, the BLK parameter PBCIC(Mandato is ry) mandatory. GBFD-111203 O&M of BSC
STARTCIC
Start CIC
BSC6900
STARTCIC
Start CIC
BSC6900
StartDayDST Prohibit Power PA Saving Start Day BSC6900
This parameter specifies the start date of a period during which the TRX Intelligent ADD Shutdown BSCDSTPADAT feature is E(Mandatory) disabled. GBFD-111602
STARTHEAT Heater Startup TEMP Temperature
BSC6900
When the environme nt temperatur e reaches the specified value of this parameter, the heater is started. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDHEUBP(O in another ptional) mode. GBFD-111202 O&M of BTS
Prohibit Power StartMonthD Saving Start STPA Month
BSC6900
This parameter specifies the start month of a period during which the TRX Intelligent ADD Shutdown BSCDSTPADAT feature is E(Mandatory) disabled. GBFD-111602
STARTPGAR Paging Arrival RIVALCTRL Control
BSC6900
This parameter indicates whether the arrival of paging SET messages BSCFCPARA(O are GSM Flow ptional) controlled. GBFD-111705 Control This parameter indicates whether the arrival of PS resource request SET messages BSCFCPARA(O is GSM Flow ptional) controlled. GBFD-111705 Control Number of SET the start BTSFORBIDTS( subOptional) timeslot GBFD-111202 O&M of BTS
STARTPSRE PS Resource SREQARRIV REQ Arrival ALCTRL Control
BSC6900
STARTSUBT Start Sub S Timeslot No.
BSC6900
Fallback Start STARTTIME Time
BSC6900
Time for which the BTS waits to start the fallback function after the OML is interrupted. With this parameter, the BTS does not start the fallback function when the SET OML is Group Call BTSFALLBACK( interrupted Reliability Optional) transiently. GBFD-510309 Enhancing This parameter specifies the start time for dynamicall y enabling the TRX Intelligent SET Shutdown BSCDSTPA(Opt feature ional) each day. GBFD-111602
Time When the StartTimeTA Function Is CloseTrxPA Enabled
BSC6900
STARTTS
Start TS
BSC6900
It indicates the start CIC of the Ater BLK interface Ater Interface ATERE1T1(Man CIC 4:1 datory) segment. GBFD-111801 Multiplexing
STARTTS
Start TS
BSC6900
STARTTS
Start Timeslot No. BSC6900
It indicates the start CIC of the A interface CIC segment. When Operation mode is set to subrack number, slot number, port number, or CIC, the BLK parameter A Interface AE1T1(Mandato is Circuit ry) mandatory. GBFD-111803 Management SET Number of BTSFORBIDTS( the start Mandatory) timeslot GBFD-111202 O&M of BTS
STC
Smart Temperature Control
BSC6900
Whether to enable the smart temperatur e control mechanis m of the FMUA. Smart temperatur e control refers to the mechanis m adopted by the FMUA to adjust the fan speed, and thus to regulate the temperatur e according to the environme nt temperatur e. In multiSET mode BTSFMUABP(O scenario, ptional) the value GBFD-111202 O&M of BTS
STC
Smart Temperature Control
BSC6900
Whether to enable the smart temperatur e control mechanis m of the NFCB. Smart temperatur e control refers to the mechanis m adopted by the NFCB to adjust the fan speed, and thus to regulate the temperatur e according to the environme SET nt BTSNFCBBP(O temperatur ptional) e. GBFD-111202 O&M of BTS
STCIC
Start CIC
BSC6900
Number of the start CIC. The C/C of each E1/T1 timeslot can be calculated on the basis of this parameter. Assume that the start CIC is 100, the CIC of the E1 timeslots on the A interface will automatica lly be set to 100, 101, 102, 103, and so on. Assume that the CIC of an ADD E1 timeslot A Interface AE1T1(Mandato is 65535, Circuit ry) the CICs of GBFD-111803 Management Number of the cabinet where the outgoing ADD port of the BTSMONITORT BTS is S(Optional) located GBFD-111202 O&M of BTS Start date. The input format is O&M of BSC YYYY&MM GBFD-111203 Security &DD. MRFD-210305 Management
STCN
Out Port Cabinet No. BSC6900
STD
Start Date
BSC6900
ADD OP(Mandatory)
STEP
Measurement Step
BSC6900
Number of frequencie s measured in each group (excluding the frequencie s in the STR original BA NCS(Mandatory) table). GBFD-510901 ADD MTP3LNK(Optio Satellite nal) flag STR BTSLOG(Option al) Start time
STFLG
Satellite flag
BSC6900
A Interface Protocol GBFD-111804 Process
STIME
Start Time
BSC6900
STIRCALLO WED EICC Allowed
BSC6900
Whether to enable the EICC algorithm. Enhanced Interferenc e Rejection Combining combines the signals received by multiple antennas to obtain better signals. EICC is mainly used in high traffic network where tight SET frequency GCELLSOFT(O reuse is in ptional) place. GBFD-115821 EICC
Stop Send SI STOPSI5SW 5/5bis/5ter after ITCH Encrypt
BSC6900
This parameter specifies whether the sending of system information 5, 5bis, and 5ter can be stopped on the SACCH on the SDCCH after the BTS SET issues a GCELLSOFT(O ciphering ptional) command. GBFD-113521
STOPTIME
Fallback Stop Time
BSC6900
Time for which the BTS waits to stop the fallback function after the OML is set up. With this parameter, the BTS does not stop the fallback function when the SET OML is set Group Call BTSFALLBACK( up Reliability Optional) transiently. GBFD-510309 Enhancing Whether to enable the signaling point with the ADD signaling A Interface N7DPC(Optional transfer Protocol ) function GBFD-111804 Process
STP
STP function switch
BSC6900
STPN
Out-BTS Port No. BSC6900
Number of the outgoing port of the BTS where the ADD monitoring SemiBTSMONITORT timeslot is Permanent S(Mandatory) located GBFD-114701 Connection Start time SET of GCELLFREQSC frequency AN(Optional) scanning
STRTM
Start Time
BSC6900
Cell Frequency GBFD-112401 Scan
STSN
Out Port Slot No. BSC6900
Number of the slot where the outgoing ADD port of the BTSMONITORT BTS is S(Optional) located GBFD-111202 O&M of BTS Number of the subrack where the outgoing ADD port of the BTSMONITORT BTS is S(Optional) located GBFD-111202 O&M of BTS
STSRN
Out Port Subrack No. BSC6900
STSUBTS
Out-BTS Sub Timeslot No.
BSC6900
Number of the subtimeslot on the ADD outgoing BTSMONITORT port of the S(Mandatory) BTS GBFD-111202 O&M of BTS Start time. The input format is O&M of BSC HH&MM& GBFD-111203 Security SS. MRFD-210305 Management
STT
Start Time
BSC6900
ADD OP(Mandatory)
STTS
Out-BTS Timeslot No. BSC6900
Number of the timeslot on the ADD outgoing BTSMONITORT port of the S(Mandatory) BTS GBFD-111202 O&M of BTS
STTYPE
BTS Type
BSC6900
SET BTSAUTODLDA CTINFO(Option Type of the al) BTS. GBFD-111202 O&M of BTS ID of the BSC in the TC pool where an A interface BLK circuit is ACIC(Mandatory blocked or ) unblocked GBFD-113726 TC Pool
ID of slave BSC SUBBSCTID in TC Pool
BSC6900
ID of slave BSC SUBBSCTID in TC Pool
BSC6900
ID of the BSC in the TC pool to which an A ADD interface AE1T1(Mandato E1/T1 is ry) added GBFD-113726 TC Pool Command string that is transparent STR ly BTSLOG(Option transmitted al) to the BTS GBFD-111202 O&M of BTS Maximum sub-frame length. This parameter indicates the maximum sub-frame length for multiplexin g. If the length of a sub-frame exceeds this value, the subframe is Abis MUX ADD not UDP MUX for IPMUX(Optional multiplexed GBFD-118604 A ) . GBFD-118610 Transmission
SUBCMD
Command Parameter
BSC6900
SUBFRAMEL Max subframe EN length[byte]
BSC6900
SUBFRAME Max Subframe THRES Length
BSC6900
Maximum sub-frame length. The data stream to be multiplexed on the same multiplexin g channel must be of the same type, and the length of the packet before multiplexin g cannot exceed the maximum subframe length. If the length of a packet exceeds the maximum subframe length, the ADD packet is BTSABISMUXF transmitted LOW(Optional) without GBFD-118604 Abis MUX ADD SUBTSK(Manda tory) ADD SUBCMD(Mand atory) SET SUBNET(Manda tory)
SUBID
Subtask ID
BSC6900
SUBNET
Subnet No
BSC6900
Number of the scheduled subtask GBFD-111203 O&M of BSC Subnet Number in a BSC None None
Sublink Resources SUBRESPR Preemption EEMPTFLG Switch
BSC6900
This parameter specifies whether the CS services preempt the sublink SET resources GCELLSOFT(O of PS ptional) services. GBFD-117301 Flex Abis
SUBRESPR Sub Res Preempt EEMPTFLG Flag BSC6900
Whether to allow the CS services to preempt the sublink resources of PS services when the Abis SET resources BTSFLEXABISP are ARA(Optional) congested GBFD-117301 Flex Abis Number of SET the subBTSOMLTS(Ma timeslot on ndatory) the port GBFD-111203 O&M of BSC Subversion No. of the TMU board. It is configured SET according BTSAUTODLDA to the CTINFO(Mandat actual ory) situation. GBFD-111202 O&M of BTS
SUBTS
Sub Timeslot No. BSC6900
SubVer
Sub-Version No.of TMU
BSC6900
SupportApply Support Apply UsedCic Used A Cic
BSC6900
Whether the CIC circuits in use on the A interface can be assigned. When this parameter is set to YES and the MSC assigns new calls to an ongoing A interface circuit, the original calls (that are occupying the circuit) are released, and the circuit is used by the new calls. When this parameter A Interface is set to Circuit NO and GBFD-111803 Management Whether to use Backup port for BSC/RNC LINE2 MRFD-210502 Clock Whether to use Backup port for BSC/RNC LINE1 MRFD-210502 Clock
SUPPORTB Use Back-up port AKCLK2SRC for LINE2 BSC6900
SET CLK(Optional)
SUPPORTB Use Back-up port AKCLKSRC for LINE1 BSC6900
SET CLK(Optional)
SUPPORTC ELLBROADC Support Cell AST Broadcast Name BSC6900
Whether to support the SET broadcast GCELLSBC(Opt of the cell Simplified Cell ional) name GBFD-113602 Broadcast
SUPPORTDL Support High 5TS Multislot Class
BSC6900
Whether to support the high multislot class. High multislot class function enables a single MS to be allocated with a maximum of five timeslots on the uplink or downlink, thus improving the uplink or downlink throughput of a single MS. The BSS supports the MS with high multislot SET classes BSCPSSOFTPA from 30 to RA(Optional) 34. A
PDCH Dynamic Adjustment MS High multislot classes Load Sharing Adaptive Adjustment of Uplink and Downlink Channels
SUPPORTD TM Support DTM
BSC6900
Whether to support dual transfer mode (DTM). The DTM allows an MS to use the circuit switching service and the packet switching service at the same time. This function must be supported SET by the GCELLGPRS(O network ptional) side. GBFD-114151 DTM Whether to support EDA. Extended dynamic allocation (EDA) enables the MS to be allocated with more timeslots on the uplink, thus improving the uplink rate and helping to transmit large SET amounts of BSCPSSOFTPA data on the RA(Optional) uplink.
SUPPORTE DA Support EDA
BSC6900
PDCH Dynamic Adjustment EDA(Extended Dynamic Allocation) Load Sharing Adaptive Adjustment of Uplink and Downlink Channels
SUPPORTE Support NDTM Enhanced DTM
BSC6900
Whether to support the enhanced DTM function. Comparing to the DTM, the enhanced DTM improves the CS setup and release. During the CS service setup, the SET PS service GCELLGPRS(O is not ptional) interrupted. GBFD-114151 DTM Whether the FE/GE BTS supports SET inter-BTS BSSLS(Optional local BTS Local ) switching GBFD-117702 Switch
Support FE/GE SupportIpSpa SPAN BTS Local nBtsLSwitch Switch BSC6900
SupportTFO CodecOptimi Support TFO ze Codec Optimize
BSC6900
Support intracell handover to change the active speech version, then can increase the usage of TFO(Tand em Free Operation) SET to improve BSCBASIC(Opti the speech onal) quality. GBFD-115701 TFO
SupptCellList SupptCellList
BSC6900
Whether to support the cell list in the common measurem ent messages over the Iur-g interface. When this parameter is set to YES, the local BSC can handle the load information of the cells in the cell list carried in the received common measurem ent messages. In addition, the BSC can carry ADD the load GNRNC(Optiona information l) of the cells MRFD-211404
MBSC Handover based on Load Enhancement
SVALUE
S Value
BSC6900
Minimum timeslots between two successive channel requests. After sending the access request, if the MS does not receive the response message after waiting for the minimum timeslots between two successive channel requests, the MS SET resends GCELLPRACH( the access Optional) request. GBFD-119110 Access Server IP address used on the SGSN side in the IP subnet dynamic configurati ADD on NSE(Mandatory) procedure GBFD-118603 Gb over IP Server UDP port number used on the SGSN side in the IP subnet dynamic configurati ADD on NSE(Mandatory) procedure GBFD-118603 Gb over IP
SVRIP
Server IP
BSC6900
SVRPORT
Server UDP Port BSC6900
SW
Switch
BSC6900
Operating state of the SET environme ALMPORT(Opti nt alarm Faulty onal) port MRFD-210304 Management If this parameter is set to "ON", you must set "OMU automatic switchover interval". Otherwise, "OMU automatic switchover SET interval" is ASWPARA(Man not datory) displayed. GBFD-111203 O&M of BSC Switch for authenticat ing objects. When the switch is enabled, the BSC system authenticat es the BTS objects of the user; when the switch is disabled, the BSC system does not SET authenticat OBJAUTHSW( e the BTS Mandatory) objects. GBFD-111203 O&M of BSC SET Whether to BTSENVALMP enable the ORT(Mandatory) alarm port GBFD-111202 O&M of BTS OPR Power BTSBRDPWR( switch Mandatory) state. GBFD-111202 O&M of BTS
SW
OMU Automatic Switchover Switch
BSC6900
SW
Switch
BSC6900
SW
Switch
BSC6900
SW
Power Switch
BSC6900
SWEEK
Start week
BSC6900
Switch
Port switch Self-healing Switch
BSC6900
SWITCH
BSC6900
Support of Daylight Weekday Saving Time SET on which GBFD-116101 Configuration TZ(Mandatory) DST starts MRFD-210301 Management SET State of SCUPORT(Man the panel Configuration datory) port switch Switch for MRFD-210301 Management SET the OMU SLFSLVSW(Ma selfndatory) healing None None Grace Protection Period Switch determines whether to enter the SET grace LICENSECTRL( protection License Mandatory) period. MRFD-210403 Management Turn on or turn off the SET BFD IP Fault BFDPROTOSW protocol Detection (Mandatory) switch GBFD-118609 Based on BFD Whether to enable the board parameters to be configured. If this parameter is set to "YES", the user can set board parameters of the BTS. Otherwise, the user cannot set SET the board BTSALMPORT( parameters Mandatory) . GBFD-111202 O&M of BTS
SWITCH
Grace Protection Period Switch BSC6900
SWITCH
Bfd Protocol Switch
BSC6900
SWITCH
Alarm Parameter Configuration Enabled BSC6900
SWITCH3AH 3ah Switch
BSC6900
Whether to enable the 3ah SET function on GBFD-115501 AMR FR BTSETHPORT( the BTS GBFD-115502 AMR HR Optional) port. GBFD-115701 TFO The field indicates whether the primary path can be switched ADD back when SCTPLNK(Optio it is nal) available. GBFD-118602 A over IP The association is smoothly switched over to the primary path after the number of heartbeat ADD responses SCTPLNK(Optio is nal) received. GBFD-118602 A over IP
SWITCHBAC Switch primary IP KFLAG address flag BSC6900
SWITCHBAC Switch back HB KHBNUM number
BSC6900
SwitchParam SwitchParameter eter1 1 BSC6900
Set patch SET switch SS7PATCHSWI parameter TCH(Optional) 1 GBFD-111203 O&M of BSC
Set patch SET switch SS7PATCHSWI parameter TCH(Optional) 9 GBFD-111203 O&M of BSC Number of the switching port. If "Link Attribute" is set to "BBU", the switching port must be configured. The value ADD ranges BTSSFPMODE( from 3 to Optional) 5. GBFD-111202 O&M of BTS Whether to enable the SET local user O&M of BSC OPSW(Mandato manageme GBFD-111203 Security ry) nt function MRFD-210305 Management Support of Sequence Daylight of the start Saving Time week of GBFD-116101 Configuration DST MRFD-210301 Management
SWITCHPO RTNO
Switch Port
BSC6900
SWOP
Set Enable/Disable
BSC6900
SWSEQ
Start week sequence
BSC6900
SET TZ(Mandatory)
BTS Symbol SYMOFFSET Offset
BSC6900
Symbol offset of the BTS set manually. After the offset information of the BTS is collected, the symbol offset is adjusted. Adjustment value = Collected symbol offset relative to the reference BTS (BTS symbol offset + SET BSC SoftBTSAISS(Optio symbol Synchronized nal) offset). GBFD-118201 Network Synchroniz ation status. This parameter is used to identify different 3G cells. This parameter should be same with the ADD configurati GSM/TDGEXT3GCELL( on of 3G SCDMA Mandatory) cells. GBFD-114302 Interoperability
SYNCCASE
Sync case
BSC6900
Site SYNCMETH Synchronization OD Method
BSC6900
Site synchroniz ation method. AISS stands for the airinterface soft synchroniz ation method, IBCA and GPS (Interference stands for Based Channel the GPS Allocation) SET synchroniz SoftBTSOTHPARA( ation GBFD-117002 Synchronized Optional) method. GBFD-118201 Network
SYNMODE
Clock Synchronization Mode
BSC6900
Synchroniz SET ation mode BTSIPCLKPAR of the IP A(Mandatory) clock GBFD-118606 Clock over IP Interim synchroniz ation period (in days). The BTS can reinitiate the synchroniz SET ation only BTSIPCLKPAR after the A(Optional) period. GBFD-118606 Clock over IP Interim synchroniz ation period (in hours). The BTS can reinitiate the synchroniz SET ation only BTSIPCLKPAR after the A(Optional) period. GBFD-118606 Clock over IP
SYNTIMEDA Days of Inter Y Sync Period
BSC6900
SYNTIMEHO Hours of Inter UR Sync Period
BSC6900
SYNTIMEMI Minutes of Inter N Sync Period
BSC6900
Interim synchroniz ation period (in minutes). The BTS can reinitiate the synchroniz SET ation only BTSIPCLKPAR after the A(Optional) period. GBFD-118606 Clock over IP Contact way of the Base Station Controller Configuration supplier MRFD-210301 Management Description of the Base Station Configuration Controller MRFD-210301 Management
SYSCONTA CT
Contact mode of the manufacturer BSC6900
SET SYS(Optional)
SYSDESC
System description
BSC6900
SET SYS(Optional)
System flux thresholds correspond to the system flux obtained based on message packets, CPU load, and FID queuing load. The system flux level is the current flux control level of the system. 0-11: There are 12 flow control levels. Where, 0 indicates the lowest level and 11 HUAWEI I SET indicates Handover GCELLHOAD(O the highest GBFD-110601 HUAWEI II ptional) level. GBFD-510501 Handover Location of the Base Station Configuration Controller MRFD-210301 Management
System Flux SYSFLOWLE Threshold for V Load HO
BSC6900
SYSLOCATI ON System Location
BSC6900
SET SYS(Optional)
Send System SysMsg10All Message 10 owed Allow
BSC6900
Whether sending the system information type 10 message on the VGCS/VB S TCH is allowed. For detailed information , see the SET 3GPP TS Public Voice BSCBASIC(Opti 44.018 Group Call onal) 9.1.50. GBFD-510301 Service
SYSOBJECT ID NE Name
BSC6900
SET SYS(Optional)
Name of the Base Station Controller of Network Configuration Element MRFD-210301 Management Services provided by the Base Station Controller
SYSSERVIC ES System services
BSC6900
SET SYS(Optional)
T1
T1
BSC6900
Timer T1, specifying the duration of monitoring the BVC blocking SET (unblockin BSSGPPARA(O g) Gb Interface ptional) procedure. GBFD-119001 Function Value of the first CHG timer for BTSPTUSHKTM the PTU (Optional) handshake GBFD-118601 Abis over IP When the reception of a TFP causes unavailabili ty of a route, this timer is started to regularly check SET whether A Interface MTP3TMR(Opti the route is Protocol onal) recovered. GBFD-111804 Process
T1
Time1
BSC6900
T10TMR
Signalling route set test timer
BSC6900
T12TMR
Uninhibit ACK timer
BSC6900
This timer is a protection timer waiting for an uninhibit acknowled gement message (LUA) from the peer end after an uninhibit message SET (LUN) is A Interface MTP3TMR(Opti sent to the Protocol onal) peer end. GBFD-111804 Process This timer is a protection timer waiting for a force uninhibit acknowled gement message (LUA) from the peer end after a force uninhibit message SET (LFU) is A Interface MTP3TMR(Opti sent to the Protocol onal) peer end. GBFD-111804 Process
T13TMR
Force uninhibit timer
BSC6900
T14TMR
Inhibition ACK timer
BSC6900
This timer is a protection timer waiting for an inhibition acknowled gement message (LIA) from the peer end after an inhibition message SET (LIN) is A Interface MTP3TMR(Opti sent to the Protocol onal) peer end. GBFD-111804 Process This timer is started when a link fails to be started. The restart of the link is initiated SET after this A Interface MTP3TMR(Opti timer Protocol onal) expires. GBFD-111804 Process When a normal changeove r cannot be initiated, services will be changed over to an alternative link after this timer expires to SET avoid A Interface MTP3TMR(Opti disorder of Protocol onal) data. GBFD-111804 Process
T17TMR
Link realignment timer
BSC6900
T1TMR
Time-control changeover timer BSC6900
T2
T2
BSC6900
Timer T2, specifying the duration of monitoring the procedure of resetting SET SIG BVC BSSGPPARA(O and PTP Gb Interface ptional) BVC. GBFD-119001 Function Value of the second CHG timer for BTSPTUSHKTM the PTU (Optional) handshake GBFD-118601 Abis over IP
T2
Time2
BSC6900
T200
T200
BSC6900
Timer in the LAPD protocol. The value of the timer indicates the time when the LAPD link waits for the response or acknowled gement frame after sending SET the BTSRINGATTR( command Optional) frame. GBFD-117801 Ring Topology
T200FACCH F T200 FACCH/F
BSC6900
This parameter specifies the expiry value of timer T200 used for the FACCH/T CHF over the Um interface. For the function of timer T200 and the effect of the parameter, see the SET description GCELLCCTMR( of "T200 Radio Link Optional) SDCCH". GBFD-111002 Management This parameter specifies the expiry value of timer T200 used for the FACCH/T CHH over the Um interface. For the function of timer T200 and the effect of the parameter, see the SET description GCELLCCTMR( of "T200 Radio Link Optional) SDCCH". GBFD-111002 Management
T200FACCH H T200 FACCH/H
BSC6900
T200SACCH T200 SACCH 3 TCH SAPI3
BSC6900
This parameter specifies the expiry value of timer T200 used for the SACCH over the Um interface when the TCH supports SAPI3 services. For the function of timer T200 and the effect of the parameter, see the SET description GCELLCCTMR( of "T200 Radio Link Optional) SDCCH". GBFD-111002 Management This parameter specifies the expiry value of timer T200 used for the SACCH on the SDCCH. For the function of timer T200 and the effect of the parameter, see the SET description GCELLCCTMR( of "T200 Radio Link Optional) SDCCH". GBFD-111002 Management
T200SACCH T200 SACCH S SDCCH
BSC6900
T200SACCT T200 SACCH 0 TCH SAPI0
BSC6900
This parameter specifies the expiry value of timer T200 used for the SACCH over the Um interface when the TCH supports SAPI0 services. For the function of timer T200 and the effect of the parameter, see the SET description GCELLCCTMR( of "T200 Radio Link Optional) SDCCH". GBFD-111002 Management
T200SDCCH T200 SDCCH
BSC6900
This parameter specifies the timeout value of timer T200 used for the SDCCH over the Um interface. T200 prevents the data link layer from deadlock during data transmissi on. The data link layer transforms the physical link that is vulnerable to errors into a sequential SET non-error GCELLCCTMR( data link. Radio Link Optional) The GBFD-111002 Management
T200SDCCH T200 SDCCH 3 SAPI3
BSC6900
This parameter specifies the expiry value of timer T200 when the SDCCH supports SAPI3 services. For the function of timer T200 and the effect of the parameter, see the SET description GCELLCCTMR( of "T200 Radio Link Optional) SDCCH". GBFD-111002 Management
T203
T203
BSC6900
Timer in the LAPD protocol. The value of the timer indicates the maximum duration for no frame SET exchange Fast Ring BTSRINGATTR( in the Network Optional) LAPD link. GBFD-117802 Switch
T22TMR
Local inhibit test timer
BSC6900
After a local link is inhibited, this timer is started to regularly check the manageme SET nt states at A Interface MTP3TMR(Opti both ends Protocol onal) of the link. GBFD-111804 Process
T23TMR
Remote inhibit test timer
BSC6900
After a remote link is inhibited, this timer is started to regularly check the manageme SET nt states at A Interface MTP3TMR(Opti both ends Protocol onal) of the link. GBFD-111804 Process This timer is a protection timer waiting for an extended changeove r acknowled gement message (XCA) from the peer end after an extended changeove r order message SET (XCO) is A Interface MTP3TMR(Opti sent to the Protocol onal) peer end. GBFD-111804 Process
T2TMR
Changeover ACK timer BSC6900
T3
T3
BSC6900
Timer T3. T3 is started after the message SUSPEND is received on the BSC side. T3 is stopped after the message SET SUSPEND BSSGPPARA(O ACK is Gb Interface ptional) received. GBFD-119001 Function Value of the third CHG timer for BTSPTUSHKTM the PTU (Optional) handshake GBFD-118601 Abis over IP When the BTS sends physical information to the MS, the BTS starts the timer T3105.If the timer T3105 expires before the BTS receives the SAMB frame from MS, the BTS resends physical information to the MS and restarts the timer T3105. The maximum times for resending HUAWEI I SET physical Handover GCELLHOAD(O information GBFD-110601 HUAWEI II ptional) is "Max GBFD-510501 Handover
T3
Time3
BSC6900
T3105
T3105
BSC6900
T3115
T3115
BSC6900
T3168
T3168
BSC6900
Timer for retransmitti ng the VGCS SET UPLINK Public Voice GCELLGSMR(O GRANT Broadcast ptional) message GBFD-510302 Service T3168 is used to set the maximum duration for the MS to wait for the uplink assignmen t message. After the MS originates the uplink TBF setup request by sending the packet resource request or the channel request in the packet uplink acknowled ge message, the timer T3168 is started to SET wait for the GCELLPSBASE packet (Optional) uplink GBFD-114101 GPRS
T3192
T3192
BSC6900
Duration of releasing the TBF after the MS receives the last data block. When the MS receives the RLC data block containing the flag identifying the last data block and confirms that all the RLC data blocks in the TBF are received, the MS sends the packet downlink acknowled SET ge GCELLPSBASE message (Optional) containing GBFD-114101 GPRS
T3212
T3212
BSC6900
This parameter specifies the length of the timer for periodic location Location update. GBFD-110301 Updating Timer on the DTE side, specifying the duration of acknowled ging the sending BC link integrity. GBFD-510002 Gb Over FR
T391
Parameter of DTE [T391]
BSC6900
ADD BC(Optional)
T3TMR
Time-control changeback timer BSC6900
When a normal changebac k cannot be initiated, services will be changed back to a normal link only after this timer expires to SET avoid A Interface MTP3TMR(Opti disorder of Protocol onal) data. GBFD-111804 Process Timer T4. T3 is started after the message v is received on the BSC side. T4 is stopped after the message SET RESUME BSSGPPARA(O ACK is Gb Interface ptional) received. GBFD-119001 Function This timer is a protection timer waiting for a changebac k acknowled gement message (CBA) from the peer end after the first changebac k declaration SET (CBD) is A Interface MTP3TMR(Opti sent to the Protocol onal) peer end. GBFD-111804 Process
T4
T4
BSC6900
T4TMR
Changeover ACK first attempt timer BSC6900
T5
T5
BSC6900
Timer T5. When the downlink TBF is set up, if the BSC side does not receive the valid RACAP, the BSC originates the radio access capability update flow and the timer T5 is started. After receiving the core network SET response, BSSGPPARA(O the timer is Gb Interface ptional) stopped. GBFD-119001 Function This timer is a protection timer waiting for a changebac k acknowled gement message (CBA) from the peer end after the second changebac k declaration SET (CBD) is A Interface MTP3TMR(Opti sent to the Protocol onal) peer end. GBFD-111804 Process
T5TMR
Changeover ACK second attempt timer BSC6900
T6
T6
BSC6900
Timer T6. The BSC sends the SGSN request to download the BSS PFC. When the QoS parameter is obtained, the timer is started. After the message CREATE_ BSS_PFC is received, the timer is stopped. After the timer expires, the request is sent to start the procedure of SET downloadin BSSGPPARA(O g the BSS Gb Interface ptional) PFC. GBFD-119001 Function
T8
T8
BSC6900
Timer T8. The BSC sends the SGSN request to download the BSS PFC. When the QoS parameter is obtained, the timer is started. After the message MODIFY_ BSS_PFC _ACK is received, the timer is stopped. After the timer expires, the request is sent to start the procedure of SET downloadin BSSGPPARA(O g the BSS Gb Interface ptional) PFC. GBFD-119001 Function This timer is started when a transmissi on prohibited message (TFP) is sent. The TFP will not be sent any more SET during the A Interface MTP3TMR(Opti running of Protocol onal) this timer. GBFD-111804 Process
T8TMR
Transmission prohibited inhibition timer
BSC6900
TAFLTLEN
Filter Length for TA
BSC6900
When the network receives measurem ent reports, the measurem ent values in several straight measurem ent reports are filtered to reflect the radio operating environme nt for the sake of accuracy. This parameter specifies the number of measurem ent reports HUAWEI I SET sampled Handover GCELLHOFITP for filtering GBFD-110601 HUAWEI II EN(Optional) the TA. GBFD-510501 Handover Whether the TA is used as a decisive condition for the SET concentric GCELLHOIUO( cell Optional) handover GBFD-113201 Concentric Cell
TAFORUOH TA for UO HO OALLOW Allowed
BSC6900
TAHOEN
TA HO Allowed
BSC6900
Whether to enable the time advance (TA) handover. The TA handover determines whether the timing advance (TA) is higher than the predefined TA threshold. When the TA is higher than the predefined TA threshold, a TA handover is triggered. The TA is calculated HUAWEI I SET based on Handover GCELLHOBASI the GBFD-110601 HUAWEI II C(Optional) distance GBFD-510501 Handover
TAHYST
TA Hysteresis
BSC6900
One of the parameters that determine the coverage of the OL subcell and UL subcell. When "Enhanced Concentric Allowed" is set to OFF, "TA Hysteresis" , "RX_LEV Threshold" , "RX_LEV Hysteresis" , "RX_QUAL Threshold" , and "TA Threshold" determine the coverage of the OL subcell SET and UL GCELLHOIUO( subcell. Optional) When GBFD-113201 Concentric Cell
TALASTTIM TA HO Valid E Time
BSC6900
The P/N criterion must be met for triggering a TA handover. That is, the TA handover can be triggered only if P measurem ent reports among N measurem ent reports meet the triggering conditions. This parameter correspond ADD s to P in G2GNCELL(Opti the P/N HUAWEI II onal) criterion. GBFD-510501 Handover An emergency handover is triggered when TA is greater than or equal to HUAWEI I SET the value Handover GCELLHOEMG( of this GBFD-110601 HUAWEI II Optional) parameter. GBFD-510501 Handover
TALIMIT
TA Threshold
BSC6900
TALKERINFI Talker Info NT Interval
BSC6900
This parameter specifies the interval of broadcasti ng the speech data of the talker on the downlink group call channel that is controlled by the BTS. When the parameter is set to 0, the BTS (instead of the BSC6900) performs the broadcasti SET ng with the GCELLGSMR(O default Talker ptional) interval 5s. GBFD-510306 Identification
TASIGSTRF TA Filter Length LTLEN for SDCCH Level BSC6900
When the network receives measurem ent reports, the measurem ent values in several straight measurem ent reports are filtered to reflect the radio operating environme nt for the sake of accuracy. This parameter specifies the number of measurem ent reports sampled for filtering the TA on HUAWEI I SET the Handover GCELLHOFITP signaling GBFD-110601 HUAWEI II EN(Optional) channel. GBFD-510501 Handover ADD AISSCFG(Mand atory) ADD NCELL(Mandato ry) COL SYNCINFO(Man datory) SET BTSEXCURSIO N(Mandatory) SET BSCSYNCOFF( Mandatory) COL BSCSYNCINFO (Mandatory)
TASKIDX
AISS Task Index BSC6900
Unique identifier of the Um interface software Softsynchroniz Synchronized ation task GBFD-118201 Network
TASTATTIM TA HO Watch E Time
BSC6900
The P/N criterion must be met for triggering a TA handover. That is, the TA handover can be triggered only if P measurem ent reports among N measurem ent reports meet the triggering conditions. This parameter correspond ADD s to N in G2GNCELL(Opti the P/N HUAWEI II onal) criterion. GBFD-510501 Handover
TATHRES
TA Threshold
BSC6900
One of the parameters that determine the coverage of the OL subcell and UL subcell. When "Enhanced Concentric Allowed" is set to OFF, "TA Hysteresis" , "RX_LEV Threshold" , "RX_LEV Hysteresis" , "RX_QUAL Threshold" , and "TA Threshold" determine the coverage of the OL subcell SET and UL GCELLHOIUO( subcell. Optional) When GBFD-113201 Concentric Cell
TAVGT
T_AVG_T
BSC6900
Filter period of the signal strength in the packet transmissi on mode of the MS. The MS in the packet transmissi on mode measures the downlink signal strength. This parameter is used to calculate the Cn value of the MS output power. This parameter specifies the relation SET between GCELLPSPWP Cn and CnARA(Optional) 1. GBFD-119115 Power Control
TAVGW
T_AVG_W
BSC6900
Filter period of the signal strength in the packet idle mode of the MS. The MS in the packet idle mode measures the downlink signal strength. This parameter is used to calculate the Cn value of the MS output power. This parameter specifies the relation SET between GCELLPSPWP Cn and CnARA(Optional) 1. GBFD-119115 Power Control
TB
Output Segment No
BSC6900
Number of the output segment 1: Segment 1 describes the basic information of the equipment. 2: Segment 2 describes the connection information . 3: Segment 3 describes the module information . 4: Segment 4 describes the configurati on information . EXP 5: DEVFILE(Option Segment 5 al) describes GBFD-111203 O&M of BSC
TB
Output Segment No.
BSC6900
Output Segment No. 1: Segment 1 describes the basic information of the equipment. 2: Segment 2 describes the connection information . 3: Segment 3 describes the module information . 4: Segment 4 describes the configurati on information . EXP 5: BTSDEVFILE(O Segment 5 ptional) describes GBFD-111202 O&M of BTS
TBS
Try Switching Duration Time
BSC6900
SET BTSOMLBACK UP(Optional)
Maximum time in which the BTS attempts to set up the OML after swapping the main and backup OMLs. If the BTS fails to set up the OML within this time, the BTS swaps the main and backup OMLs again. GBFD-113728 OML Backup
TBS
Ring I Try Rotating Duration Time BSC6900
The BTS repeatedly attempts to connect to port 0 or port 1 after the switchover. If the connection on one port fails within the time specified by this parameter, the BTS tries to SET connect to BTSRINGATTR( another Optional) port. GBFD-117801 Ring Topology
TC
Test code
BSC6900
Test code for the MTP3 link. After the successful test, the link can be used for carrying signaling services. If the test fails, the MTP3 periodically sends the fault locating command until the operation is successful. When the link is deleted or deactivate d, the system stops to send the ADD fault A Interface MTP3LNK(Optio locating Protocol nal) command. GBFD-111804 Process
TC
Tc
BSC6900
Timer Tc, specifying the interval for the BVC and MS to send flow control messages. When this parameter is set to a smaller value, the BVC and the MS send flow control messages in a shorter time, which allows the SGSN can use the latest flow control parameter to improve the transmissi on SET performan BSSGPPARA(O ce. When Gb Interface ptional) the BVC GBFD-119001 Function
TCC
Temperature Compensation Coefficient
BSC6900
Temperatu re compensat ion coefficient. This parameter defines the charging voltage increase or decrease unit of each battery when the ambient temperatur e of the battery varies with the reference temperatur e regulated by the vendor by 1 degree Celsius. See the vendor SET specificatio BTSAPMUBP(O n for the ptional) setting of GBFD-111202 O&M of BTS
TCCRCAllow ed TC CRC Allowed BSC6900
This parameter specifies the cyclic redundanc y check (CRC) switch, which can be set to On or Off. The value of this parameter determines whether check is performed on the TRAU frame between the SET BSC6900 BSCBASIC(Opti and the GBFD-111203 O&M of BSC onal) BTS. GBFD-113726 TC Pool
TCH Rate Adjust TCHAJFLAG Allow BSC6900
Whether to allow the cell to dynamicall y change a channel from full rate to half rate or from half rate to full rate. If this parameter is set to YES, the conversion is allowed; if the parameter is set to NO, the conversion is not allowed and the changed channel is restored to the previous rate mode. SET In addition, GTRXDEV(Opti this onal) parameter GBFD-113402 If the current channel seizure ratio reaches or exceeds this value, the halfrate TCH is assigned preferential ly; otherwise, the full-rate TCH is SET assigned GCELLCHMGA preferential D(Optional) ly. GBFD-111005
Dynamic Adjustment Between FR and HR
TCHBUSYTH TCH Traffic Busy RES Threshold BSC6900
DL FER TCHDROPS Threshold for TATDLFER TCH Call Drop
BSC6900
When a call drops on the TCH, the correspond ing TCH call drop counter is incremente d by one if the DL FER carried in the last MR is greater than the SET value of GCELLOTHEXT this (Optional) parameter. GBFD-111004 When a call drops on the TCH, the correspond ing TCH call drop counter is incremente d by one if the downlink level carried in the last MR is lower than SET the value GCELLOTHEXT of this (Optional) parameter. GBFD-111004
DL Level TCHDROPS Threshold for TATDLLEV TCH Call Drop
BSC6900
DL Quality TCHDROPS Threshold for TATDLQUAL TCH Call Drop
BSC6900
When a call drops on the TCH, the correspond ing TCH call drop counter is incremente d by one if the downlink quality carried in the last MR is greater than the SET value of GCELLOTHEXT this (Optional) parameter. GBFD-111004 When a call drops on the TCH, the correspond ing TCH call drop counter is incremente d by one if the UL FER carried in the last MR is greater than the SET value of GCELLOTHEXT this (Optional) parameter. GBFD-111004
UL FER TCHDROPS Threshold for TATULFER TCH Call Drop
BSC6900
UL Level TCHDROPS Threshold for TATULLEV TCH Call Drop
BSC6900
When a call drops on the TCH, the correspond ing TCH call drop counter is incremente d by one if the uplink level carried in the last MR is lower than SET the value GCELLOTHEXT of this (Optional) parameter. GBFD-111004 When a call drops on the TCH, the correspond ing TCH call drop counter is incremente d by one if the uplink quality carried in the last MR is greater than the SET value of GCELLOTHEXT this (Optional) parameter. GBFD-111004
UL Quality TCHDROPS Threshold for TATULQUAL TCH Call Drop
BSC6900
TCHHOMINI Min Interval for NTV TCH Hos
BSC6900
After a new TCH is assigned to an MS, the MS can be handed over to another channel only if the time during which the MS occupies the TCH is longer than the period HUAWEI I SET specified Handover GCELLHOCTRL by this GBFD-110601 HUAWEI II (Optional) parameter. GBFD-510501 Handover Maximum number of discarded MRs allowed on the TCH in SET a power HUAWEI III GCELLPWR3(O control Power Control ptional) period GBFD-117601 Algorithm
TCHMRCUT NUM TchMrCutNum
BSC6900
TCHRATEM ODIFY TCH Rate Modify BSC6900
Whether the TCH rate type uses the MSC strategy or BSC strategy. When this parameter is set to NO and the MSC policy is used, the BSC preferential ly selects full-rate or half-rate channels based on the rate type carried by the MSC in the assignmen t or incoming BSC handover request. When this GBFD-111005
TCHTIMEHO TCH Time PERIOD Handover Period BSC6900
This parameter specifies the interval at which the speech service on SET a TCH is GCELLSOFT(O handed ptional) over. GBFD-113521 This parameter specifies whether to perform periodic intra-cell handover SET for speech GCELLSOFT(O services ptional) on TCH. GBFD-113521
TCHTIMEHO TCH Time SWITCH Handover Switch BSC6900
TCHTRIBUS Tch Traffic Busy YUNDERLAY Underlay THR Threshold
BSC6900
Threshold for determinin g that the underlaid subcell is busy. The BSC assigns channels in the underlaid subcell to the MS in a concentric cell. When "Allow Rate Selection Based on Overlaid/U nderlaid Subcell Load" is set to YES, half-rate channels are assigned if the SET channel GCELLCHMGA seizure D(Optional) ratio in the GBFD-113201 Concentric Cell
TCHTRICBU Tch Traffic Busy SYOVERLAY Overlay THR Threshold
BSC6900
The BSC assigns channels in the overlaid subcell to the MS in a concentric cell. If the channel seizure ratio of overlaid subcell is greater than the value of this parameter, half-rate channels are assigned. Otherwise, full-rate channels are assigned. Channel seizure SET ratio = GCELLCHMGA (Num. of D(Optional) busy Test code GBFD-113201 Concentric Cell length of the signaling link. By ADD default, the A Interface MTP3LNK(Optio value is Protocol nal) 10. GBFD-111804 Process
TCLEN
Test code length
BSC6900
TCMODE
TC mode
BSC6900
Mode of TC. SEPERAT E_PRINCI PAL: Specifies that the MTP3 link is configured for the primary BSC in the case of BM/TC separated configurati on mode. SEPERAT E_SUBOR DINATE: Specifies that the MTP3 link is configured for the slave BSC in the case of BM/TC separated ADD configurati A Interface MTP3LNK(Mand on mode. Protocol atory) TOGETHE GBFD-111804 Process Whether to enable the SET class-1 GCELLSOFT(O mute ptional) detection. GBFD-111203 O&M of BSC ADD BTSRXUCHAIN (Mandatory) CBN BTSRXUCHAIN (Mandatory) Number of the cabinet where the main board of the RXU ring is located GBFD-111202 O&M of BTS Number of the TC port where one end of the ATER connection channel is located None
TCMUTEDE Mute Detect TECTFLAG Class1 Switch
BSC6900
TCN
Tail Cabinet No.
BSC6900
TCPN
TC Port No
BSC6900
None
TCPOOLID
TC Pool ID
BSC6900
If you enable the TC pool function when configuring the basic information of the BSC6900, you need to enter the TC Pool ID. The ID must be SET unique in BSCBASIC(Man the entire datory) network. GBFD-113726 TC Pool Number of the TC slot where one end of the ATER connection channel is located None Number of the TC subrack where one end of the ATER connection channel is located None
TCSN
TC Slot No
BSC6900
None
TCSRN
TC Subrack No
BSC6900
None
TCTYPE
The type of TC resource
BSC6900
The type of TC resource GTC: TC resources that support normal voice coding/dec oding and packet conversion UTC: TC resources that support only the optimized handover on the Iurg interface ITC: TC resources that support only the dual-stack SET function on TCTYPE(Manda the A Configuration tory) interface MRFD-210301 Management
TDD BA1 Input TDDBA1TAG Tag
BSC6900
Input mode of the BA table. In auto mode, the system fills in the BA1 and BA2 tables based on the adjacent relation of cells. In manual mode, the user maintains the BA table. If the adjacent relation of cells is modified, for example, a neighborin g cell is added or a cell is deleted, SET the user GCELLIDLETD needs to GSM/TDDBA1(Mandator maintain SCDMA y) the BA1 GBFD-114302 Interoperability Whether the FDD BA2 table is generated automatica lly according to the neighborin SET g relation GCELLHOTDD or typed Configuration BA2(Mandatory) manually. MRFD-210301 Management
TDDBA2 Input TDDBA2TAG Tag
BSC6900
TDDCELLOF TDD Reporting F Offset
BSC6900
When the priority of a TDD cell is ranked, the value of this parameter is added to the receive level of the TDD cell in the measurem ent report. The values of this parameter correspond to the following decibel values: 0: 0 dB SET 1: 6 dB GSM/TDGCELLCCUTRA ... SCDMA NSYS(Optional) 7: 42 dB GBFD-114302 Interoperability
TDDCELLRE TDD Cell SELDIV Reselect Diversity BSC6900
A TDD cell can become a candidate cell only when the average receive level of the TDD cell is greater than the TDD Cell Reselect Diversity of the serving cell. The value of this parameter correspond s to the following decibel value: 0: negative infinity 1: -28 dB SET 2: -24 dB GSM/TDGCELLCCUTRA ... SCDMA NSYS(Optional) 15: 28 dB GBFD-114302 Interoperability
TDDCELLTH TDD Reporting RED Threshold
BSC6900
Threshold for determinin g whether the MR about a TDD cell is valid. The measurem ent report is valid if the receive level of the TDD cell in the measurem ent report is greater than the value of this parameter. After the valid measurem ent report is filtered, the TDD cell joins in the cell SET prioritizatio GSM/TDGCELLCCUTRA n. SCDMA NSYS(Optional) The value GBFD-114302 Interoperability This parameter specifies whether to activate the diversity mode on SET the GCELLIDLETD common GSM/TDDBA1(Mandator channel of SCDMA y) a 3G cell. GBFD-114302 Interoperability
TDDDIVERSI TY Diversity
BSC6900
TDDDLUARF AN DL UARFAN
BSC6900
Downlink frequency of frequency 1 in table 3GBA2. This parameter indicates the detected downlink frequency in the 3G adjacent cell list in speech. The parameter is delivered in the SET system GCELLIDLETD information GSM/TDDBA1(Mandator 2QUTER/ SCDMA y) MI. GBFD-114302 Interoperability
TDDMIOPTI TDD MI System MIZEDALLO Information WED Optimized
BSC6900
This parameter specifies whether the TDD MI system information optimized function is enabled. When this parameter is set to NO and "TDD System Information Optimized Allowed" is set to YES, the MI system information issued in the TDD scenario does not carry neighborin g cell scrambling SET codes. In GSM/TDGCELLCCUTRA other SCDMA NSYS(Optional) scenarios, GBFD-114302 Interoperability
TDD MI System INFO TDDMIPROH Broadcasting IBIT Prohibit
BSC6900
This parameter specifies whether to send the system information MI which contains the 3G neighborin g cell information in the TDD neighborin g cell. The value YES(YES) indicates that the MI is sent, and the value NO(NO) SET indicates GSM/TDGCELLCCUTRA that the MI SCDMA NSYS(Optional) is not sent. GBFD-114302 Interoperability Minimum RSCP quality threshold that the TDD 3G ADD candidate GEXT3GCELL( cell must Optional) reach
TDDRSCPQ PS TDD RSCP UALTHRSH Quality Threshold BSC6900
GSM/TDSCDMA GBFD-114302 Interoperability
TDDSCRAM BLE Cell Parameter ID BSC6900
TDD cell parameter ID. The ID is used to distinguish terminals or cells. This parameter is used after spread spectrum. Therefore, it does not change the bandwidth of signals, but only distinguish es the signals from different sources. Through scrambling , multiple transceiver s can use SET the same GCELLIDLETD codes for GSM/TDDBA1(Mandator spread SCDMA y) spectrum. GBFD-114302 Interoperability
TDDSCRAM BLE Cell Parameter ID BSC6900
Cell parameter ID of a TDD cell. The cell parameter ID distinguish es between MSs or cells. It is used after spread spectrum. Therefore, it distinguish es between the signals from different sources, but not the changes in the bandwidth of signals. Through scrambling SET , multiple GCELLHOTDD transceiver Configuration BA2(Mandatory) s can use MRFD-210301 Management
TDD System TDDSIOPTI Information MIZEDALLO Optimized WED Allowed
BSC6900
This parameter specifies whether to optimize the system information 2Quater and MI of the TDD neighborin g cell. That is, to add an FDD neighborin g cell information before the TDD neighborin g cell information to solve the compatibilit y problem SET of some GSM/TDGCELLCCUTRA dual-mode SCDMA NSYS(Optional) MSs. GBFD-114302 Interoperability SyncCase in the TDDBA1 table. This parameter determines the synchroniz ation status. Value 0 indicates Sync case 1 and value 1 indicates SET Sync case GCELLIDLETD 2. This DBA1(Mandator parameter y) is used to SET identify GSM/TDGCELLHOTDD different SCDMA BA2(Mandatory) 3G cells. GBFD-114302 Interoperability
TDDSYNCC ASE Sync Case
BSC6900
TDMCONGC Congestion clear LRTH remain ratio BSC6900
If the ratio of available TDM bandwidth is greater than this value, ADD congestion TRMLOADTH(O control is ptional) stopped. GBFD-118605 IP QOS If the ratio of available TDM bandwidth is less than or equal to this value, ADD congestion TRMLOADTH(O control is ptional) triggered. GBFD-118605 IP QOS Each subrack has six TDM port numbers, ranging from 0 to 5. Subrack 1 TDM Port No. refers to the TDM port number on subrack 1 of the interADD subrack SRCONPATH(M connection andatory) .. GBFD-111203 O&M of BSC
TDMCONGT Congestion H remain ratio
BSC6900
TDMN1
Subrack 1 TDM Port No
BSC6900
TDMN2
Subrack 2 TDM Port No
BSC6900
Each subrack has six TDM numbers, ranging from 0 to 5. Subrack 2 TDM Port No. refers to the TDM number on subrack 2 of the interADD subrack SRCONPATH(M connection andatory) . GBFD-111203 O&M of BSC Terminal endpoint ID of the Pb ADD signaling PBSL(Optional) link GBFD-111203 O&M of BSC Temperatu ADD re alarm Faulty EMU(Optional) switch MRFD-210304 Management Upper limit of temperatur Faulty e MRFD-210304 Management Lower limit of temperatur Faulty e MRFD-210304 Management
TEI TEMP_MAS K
TEI Enable Temperature Alarm Reporting
BSC6900
BSC6900
Upper Limit of TEMP_THD_ Temperature HIGH Alarm Lower Limit of TEMP_THD_ Temperature LOW Alarm
BSC6900
ADD EMU(Optional)
BSC6900
ADD EMU(Optional)
TEMPALAR MTHRESHO Upper ENV LDH TEMP Alarm
BSC6900
When the environme nt temperatur e of the APMU is greater than the value of this parameter, the BTS reports an alarm. For the APMU of the nonEPS4815 type, the minimum value of the parameter is -490. In multimode scenario, the value of this parameter in one mode must SET be the BTSAPMUBP(O same as Faulty ptional) the value MRFD-210304 Management
TEMPALAR MTHRESHO Upper ENV LDH TEMP Alarm
BSC6900
When the environme nt temperatur e is greater than the value of this parameter, the BTS reports an alarm. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another Faulty ptional) mode. MRFD-210304 Management
TEMPALAR MTHRESHO Lower ENV LDL TEMP Alarm
BSC6900
When the environme nt temperatur e of the APMU is less than the value of this parameter, the BTS reports an alarm. For the APMU of the nonEPS4815 type, the maximum value of the parameter is 990. In multimode scenario, the value of this parameter in one mode must be the SET same as BTSAPMUBP(O the value Faulty ptional) of the MRFD-210304 Management
TEMPALAR MTHRESHO Lower ENV LDL TEMP Alarm
BSC6900
When the environme nt temperatur e is less than the value of this parameter, the BTS reports an alarm. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDPMUBP(O in another Faulty ptional) mode. MRFD-210304 Management Change value of the floating charge voltage of the storage battery when the temperatur e of the storage battery changes SET by 1 BTSDPMUBP(O degree ptional) Celsius. GBFD-111202 O&M of BTS SAV Description GCELLTEMPLA of a cell Configuration TE(Optional) template. MRFD-210301 Management
TEMPCOMP Coefficient of ENSATECO Temp EF Compensation TEMPLATED Cell Template ESC Description
BSC6900
BSC6900
TEMPLATEI Cell Template D Index
BSC6900
This parameter specifies the index number of a cell template. Each template is numbered EXP uniquely in GCELLTEMPLA a Configuration TE(Mandatory) BSC6900. MRFD-210301 Management This parameter specifies the index number of a cell template. Each template is numbered SAV uniquely in GCELLTEMPLA a Configuration TE(Optional) BSC6900. MRFD-210301 Management ADD GCELL(Optional ) ADD BTSAUTOPLAN (Optional) EXP GCELLTEMPLA TE(Mandatory) SAV GCELLTEMPLA TE(Mandatory) ADD GCELLQUICKS ETUP(Optional)
TEMPLATEI Cell Template D Index
BSC6900
TEMPLATEN Cell Template AME Name
BSC6900
Name of a cell template, uniquely identifying a cell template in a Configuration BSC6900. MRFD-210301 Management
TEMPOFHIG Temp Of High HTEMPLOA Temp. Load DPWROFF Power Off
BSC6900
When the temperatur e of the BTS cabinet is greater than the value of this parameter, SET the TRX is O&M of BTS BTSAPMUBP(O powered GBFD-111202 BTS Power ptional) off. GBFD-111601 Management TRX poweroff temperatur e threshold. If the temperatur e of the BTS cabinet is less than the value of this parameter while "Low Temperatu re Startup Allowed" is set to "Yes", the SET TRX is BTSAPMUBP(O powered ptional) off. GBFD-111202 O&M of BTS
TEMPOFLO Low Temperature WTEMPLOA Start Load Power DPWROFF Off Temp. BSC6900
TEMPOFLO Low Temperature WTEMPLOA Start Load DPWROFF Poweroff Temp. BSC6900
TRX poweroff temperatur e threshold. If the temperatur e of the BTS cabinet is less than the value of this parameter while "Low Temperatu re Startup Allowed" is set to "Yes", the TRX is powered off. In multimode scenario, the value of this parameter in one mode must SET be the BTSDPMUBP(O same as ptional) the value GBFD-111202 O&M of BTS Whether the System Information Type 3 message carries System TER Information indication. GBFD-111101 Sending
TER Indicator of TER2INDICA System TOR Information 3
BSC6900
TESTTIMER Test Timer
BSC6900
Duration of the timer for starting the IP path SET status test BSCNSPARA(O on the Gb Gb Interface ptional) interface GBFD-119001 Function
TEXT
Content of Message
BSC6900
Content of ADD the cell GSMSCB(Mand broadcast Simplified Cell atory) message GBFD-113602 Broadcast AEC is an important measure to improve the speech quality. If the AEC works for a consecutiv e time that is longer than the value of this parameter, the TFO function is closed to provide a SET better TCPARA(Option speech al) quality. GBFD-115701 TFO In the VSWR test, the TRX transmits signals at a default frequency. You can specify the STR frequency BTSVSWRTST( used for BTS Test Optional) the test. GBFD-111207 Function
TFOOptSwitc TFO Option h Switch
BSC6900
TFREQ
Test Frequency
BSC6900
TFRMSTART TIME Frame Start Time BSC6900
This parameter indicates start frame number of the BTS. It is used to keep synchroniz ation between the BTS and MS SET after the GCELLOTHEXT BTS is reConfiguration (Optional) initialized. MRFD-210301 Management SWP OMUAREA(Man Target datory) OMU ADD TGWIP(Mandat ory) TGW ID
TG
Target OMU
BSC6900
TGWID
TGW ID
BSC6900
None
None
TGWIPOAMI TGW IP_TRANS P IP address BSC6900
This parameter indicates the address of the operation and ADD maintenan TGWIP(Mandat ce console ory) for TGW. None
None
TGWIPOAM TGW IP_TRANS MASK IP Mask BSC6900
This parameter indicates the mask of the operation and ADD maintenan TGWIP(Mandat ce console ory) for TGW. None Slot number of the BSC6900 interface board ADD interworkin TGWIP(Mandat g with ory) TGW. None
None
TGWPEERS TGW TRANS N Slot No.
BSC6900
None
TGWPEERS TGW Trans RN Subrack No.
BSC6900
Subrack number of the BSC6900 interface board ADD interworkin TGWIP(Mandat g with ory) TGW. None
None
TH
Th
BSC6900
Timer Th. After receiving the MS flow control message, the SGSN uses the values of the updated Bmax and R based on the interval set by this timer. When this parameter is set to a smaller value, the SGSN can use the flow control parameter in a shorter time. In this way, the data can be SET transferred BSSGPPARA(O according ptional) to the most GBFD-114101 GPRS
THDOFF
Volt Threshold for Off BSC6900
Voltage threshold for switching off the air conditioner . If the power supply voltage is less than this threshold, the air conditioner needs to be switched off to decrease SET the impact BTSAIRCON(O on the ptional) BTS. GBFD-111202 O&M of BTS Voltage threshold for switching on the air conditioner . This parameter assumes that the air conditioner is switched off. If the power supply voltage is greater than this threshold, the air conditioner needs to be switched on to ensure that SET the BTS BTSAIRCON(O runs ptional) properly. GBFD-111202 O&M of BTS
THDON
Volt Threshold for On BSC6900
THP1ARP1P THP1-ARP1 RIWEIGHT Priority Weight
BSC6900
Combinati on of the THP1 and ARP1 priority in the Interactive service. THP1ARP1 priority weight determines the number of the budget blocks and SET the block GCELLPSCHM( scheduling QoS Optional) priority. GBFD-119902 ARP&THP Combinati on of the THP1 and ARP2 priority in the Interactive service. THP1ARP2 priority weight determines the number of the budget blocks and SET the block GCELLPSCHM( scheduling QoS Optional) priority. GBFD-119902 ARP&THP
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
Combinati on of the THP3 and ARP3 priority in the Interactive service. THP3ARP3 priority weight determines the number of the budget blocks and SET the block GCELLPSCHM( scheduling QoS Optional) priority. GBFD-119902 ARP&THP Load balance threshold type. It indicates the ADD threshold TRMLOADTH(M calculation andatory) mode. GBFD-118605 IP QOS This parameter specifies the timer set to wait for a private SET message BSCTMR(Optio from the nal) SGSN. GBFD-119701 SGSN Pool
THTYPE
Threshold type
BSC6900
TI_WAIT_SG SN_PRIVAT Receive SGSN E_MESSAG Config. Msg. E Timer
BSC6900
TIGHTBCCH Level Thresh for ASSMAINBC Assign BCCH CHLEV Under TBCCH
BSC6900
During channel assignmen t, the assignmen t of channels on the BCCH TRXs depends on the uplink receive level, quality, and nonBCCH load. The TCHs are preferential ly assigned on the BCCH TRXs if the following conditions are met: 1. The uplink receive SET level after BCCH Dense GCELLCHMGA filtering is Frequency D(Optional) higher than GBFD-118001 Multiplexing
TIGHTBCCH Quality Thresh for ASSMAINBC Assign BCCH CHQUAL Under TBCCH BSC6900
During channel assignmen t, the assignmen t of channels on the BCCH TRXs depends on the uplink receive level, quality, and nonBCCH load. The TCHs are preferential ly assigned on the BCCH TRXs if the following conditions are met: 1. The uplink receive SET level after BCCH Dense GCELLCHMGA filtering is Frequency D(Optional) higher than GBFD-118001 Multiplexing
TIGHTBCCH HOLASTTIM TIGHT BCCH HO E Valid Time BSC6900
The P/N criterion must be met for triggering a TIGHT BCCH handover. That is, the TIGHT BCCH handover can be triggered only if P seconds among N seconds meet the triggering conditions. This parameter correspond SET s to P in BCCH Dense GCELLHOBASI the P/N Frequency C(Optional) criterion. GBFD-118001 Multiplexing
TIGHTBCCH Load Threshold HOLOADTH for TIGHT BCCH RES HO BSC6900
During channel assignmen t, the assignmen t of channels on the BCCH TRXs depends on the uplink receive level, quality, and nonBCCH load. The TCHs are preferential ly assigned on the BCCH TRXs if the following conditions are met: 1. The uplink receive SET level after BCCH Dense GCELLHOAD(O filtering is Frequency ptional) higher than GBFD-118001 Multiplexing
TIGHTBCCH HOSTATTIM TIGHT BCCH HO E Watch Time BSC6900
The P/N criterion must be met for triggering a TIGHTBC CH handover. That is, the TIGHTBC CH handover can be triggered only if P seconds among N seconds meet the triggering conditions. This parameter correspond SET s to N in BCCH Dense GCELLHOBASI the P/N Frequency C(Optional) criterion. GBFD-118001 Multiplexing When an intra-cell TIGHT BCCH handover needs to be performed (handover from the non-BCCH to BCCH), the downlink receive quality must be smaller than the SET value of BCCH Dense GCELLHOAD(O this Frequency ptional) parameter. GBFD-118001 Multiplexing
TIGHTBCCH RX_QUAL RXQUALTH Threshold for RES TIGHT BCCH HO BSC6900
TIGHTBCCH TIGHT BCCH SWITCH Switch
BSC6900
TIGHTSDCC IBCA Tight Trx HRXLEVTHR SDCCH Rxlev ED Threshold
BSC6900
Whether to enable the BCCH aggressive SET frequency BCCH Dense GCELLCHMGB reuse Frequency ASIC(Optional) algorithm GBFD-118001 Multiplexing If the SDCCH load on the TRXs of the compatible BCCH in loose frequency reuse pattern is greater than the "IBCA Loose Trx SDCCH Load Threshold" , and when the uplink receive level from the MS to the BTS is greater than the threshold, the SDCCHs on the TRXs of IBCA SET the (Interference GCELLCHMGA compatible Based Channel D(Optional) non-BCCH GBFD-117002 Allocation)
TIIMSIPAGIN IMSI Paging G Timer
BSC6900
IMSI paging timer. After enabling the MSC pool function, the BSC6900 receives from the MSC the paging message attached with the IMSI. Then, the BSC6900 records the relation between the IMSI and the MSC SP and starts the timer with predefined length. If the ADD BSC6900 GCNOPERATO receives a R(Optional) response GBFD-117401 MSC Pool Whether to limit the operation O&M of BSC time of the GBFD-111203 Security operator MRFD-210305 Management
TIME
Time Limit
BSC6900
ADD OP(Optional) SET TIME(Optional) SET GCELLFREQSC AN(Optional)
TIME
Time
BSC6900
TIME
Duration
BSC6900
Time GBFD-111203 O&M of BSC Duration of frequency Cell Frequency scanning GBFD-112401 Scan
Penalty Time TIMEAMRFH after AMR TCHFPUNISH H HO Fail BSC6900
Within the preset time, no AMR FR-toHR handover is allowed if the previous FR-to-HR handover fails due to channel unavailabili SET ty or GCELLHOFITP channel GBFD-110601 EN(Optional) mismatch. GBFD-510501
TIMEBQPUN Penalty Time ISH after BQ HO
BSC6900
After a handover due to bad quality is successful, the penalty on the original serving cell is performed within the "Penalty Time after BQ HO": the receive level of the original serving cell is decreased by "Penalty Level after BQ HO", to HUAWEI I SET prevent Handover GCELLHOFITP ping-pong GBFD-110601 HUAWEI II EN(Optional) handovers. GBFD-510501 Handover
Penalty Time TIMEOTOUF after OtoU HO AILPUN Fail
BSC6900
After an OL subcell to UL subcell handover of an MS fails, the MS does not perform OL subellUL subcell handovers SET within the GCELLHOIUO( value of Optional) the GBFD-113201 Concentric Cell Indicates the timeout time of the PING packet GBFD-118630 Ethernet OAM
TIMEOUT
Reply TimeOut[ms]
BSC6900
PING IP(Optional)
TIMEOUT
Reply TimeOut[ms]
BSC6900
Timeout time for waiting for the TRC TRACERT IPADDR(Option packet al) response GBFD-118630 Ethernet OAM PING MAC(Optional) PING BTSCFM(Option Timeout al) time TRC MAC(Optional) TRC BTSCFM(Option al)
Timeout
Time Out
BSC6900
TIMEOUT
Time Out
BSC6900
Indicates the timeout time of the CFM link tracing detection GBFD-118630 Ethernet OAM
TIMEOUT
Maximum Delay Time
BSC6900
Longest waiting time for multiplexin g When the multiplexed packet is no longer added with new data and the timer expires, the multiplexed packet is transmitted directly. This parameter is determined by the number of multiplexed packets. When the number of multiplexed packets ADD increases, BTSABISMUXF the value LOW(Optional) of this GBFD-118604 Abis MUX
TIMEPUNIS H
Quick Handover Punish Time
BSC6900
After the fast handover is successful, the penalty on the original serving cell is performed within the "Quick handover punish time": the receive level of the original serving cell is decreased by "Quick ADD handover GEXT2GCELL( punish Optional) value", to HUAWEI I SET prevent Handover GCELLHOFAST ping-pong GBFD-110601 HUAWEI II (Optional) handovers. GBFD-510501 Handover Indicates the times of sending PING packets None
TIMES
Number of ping packets
BSC6900
PING IP(Optional)
None
TIMESLOTV Voltage Adjust OLADJALLO Based Timeslots W Allowed
BSC6900
This parameter determines whether the dynamic voltage adjustment function is enabled on the basis of the number of timeslots. If this parameter is set to YES, the power consumpti on of base stations is reduced. This parameter maps the versions of base stations. If the parameter SET is set to GCELLBASICP NULL, ARA(Optional) base GBFD-111606
Power Optimization Based on Channel Type
TIMETAPUNI Penalty Time SH after TA HO
BSC6900
Penalty Time TIMEUTOOF after UtoO HO AILPUN Fail
BSC6900
After the time advancing handover is successful, the penalty on the original serving cell is performed within the "Penalty Time after TA HO": the receive level of the original serving cell is decreased by "Penalty Level after TA HO", to HUAWEI I SET prevent Handover GCELLHOFITP ping-pong GBFD-110601 HUAWEI II EN(Optional) handovers. GBFD-510501 Handover After an UL subcell to OL subcell handover of an MS fails, the MS does not perform UL subcell to OL subcell handovers SET within the GCELLHOIUO( value of Optional) the GBFD-113201 Concentric Cell
TIQUEUING TIMER T11
BSC6900
This parameter indicates the queue timer for assignmen t. When the BSC6900 receives an assignmen t request and no channel is available for assignmen t, the BSC6900 starts the queuing procedure and the timer. If the channel request is successful before the timer expires, SET the timer GCELLTMR(Opt stops. If ional) the timer GBFD-111005
Receive MSC TIWAITMSC Configuration MSG Message Timer
BSC6900
If the BSC6900 receives the configurati on data about all the connected MSCs before the timer expires, the BSC6900 concludes that the ADD configurati GCNOPERATO on data is R(Optional) valid. GBFD-117401 MSC Pool
TL
Time Limit
BSC6900
When the operation time of the OMU exceeds the value specified by this parameter, some records are deleted SET from the O&M of BSC LOGLIMIT(Optio operation GBFD-111203 Security nal) log. MRFD-210305 Management SET MSTOCELL(Ma ndatory) TST SNDRSI(Mandat ory) TST UPDMSRAC(Ma ndatory)
TLLI
TLLI
BSC6900
Temporary logical link ID in the decimal format GBFD-114101 GPRS
TLT
Tout Limit
BSC6900
Lowest expected value of the air outlet temperatur e. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDHEUBP(O in another ptional) mode. GBFD-111202 O&M of BTS
TLTHD
Temperature Alarm Lower Threshold
BSC6900
Temperatu re alarm lower threshold. If the temperatur e of the battery is lower than the value of this parameter, an alarm indicating the abnormal temperatur e is reported. In multimode scenario, the value of this parameter in one mode must be the same as the value of the SET correspond BTSAPMUBP(O ing ptional) parameter GBFD-111202 O&M of BTS
TLTHD
Temperature Alarm Lower Threshold
BSC6900
When the internal temperatur e of the BTS reaches the Temperatu re Alarm Lower Threshold, it reports a low temperatur e alarm. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSDHEUBP(O in another ptional) mode. GBFD-111202 O&M of BTS When the time mode is set to "ONTIME", ADD you should SUBTSK(Manda set this tory) parameter. GBFD-111203 O&M of BSC
TM
Execute Time
BSC6900
TM1
Execute Time 1
BSC6900
If the time mode is set to "DAILY_T", "WEEKLY _T", or "MONTHL Y_T", you should set this parameter. This parameter specifies the first execution time in the day in which the ADD scheduled SUBTSK(Manda task is tory) executed. GBFD-111203 O&M of BSC If the time mode is set to "DAILY_T", "WEEKLY _T", or "MONTHL Y_T", you should set this parameter. This parameter specifies the second execution time in the day in which the ADD scheduled SUBTSK(Option task is al) executed. GBFD-111203 O&M of BSC
TM2
Execute Time 2
BSC6900
TM3
Execute Time 3
BSC6900
If the time mode is set to "DAILY_T", "WEEKLY _T", or "MONTHL Y_T", you should set this parameter. This parameter specifies the third execution time in the day in which the ADD scheduled SUBTSK(Option task is al) executed. GBFD-111203 O&M of BSC If the time mode is set to "DAILY_T", "WEEKLY _T", or "MONTHL Y_T", you should set this parameter. This parameter specifies the fourth execution time in the day in which the ADD scheduled SUBTSK(Option task is al) executed. GBFD-111203 O&M of BSC
TM4
Execute Time 4
BSC6900
TM5
Execute Time 5
BSC6900
If the time mode is set to "DAILY_T", "WEEKLY _T", or "MONTHL Y_T", you should set this parameter. This parameter specifies the fifth execution time in the day in which the ADD scheduled SUBTSK(Option task is al) executed. GBFD-111203 O&M of BSC ADD TRMMAP(Mand TRMMAP atory) index
TMI
TRMMAP ID
BSC6900
GBFD-118605 IP QOS
TMIGLD
TRMMAP index
BSC6900
TMLEN
Time Length
BSC6900
TMODE
Test Mode
BSC6900
Index of the traffic mapping used by the current ADD adjacent ADJMAP(Manda node's tory) gold user. None STR FRPORTLOOP( Loopback Mandatory) time length None STR BTSVSWRTST( Optional) Test mode GBFD-111207
None
None BTS Test Function
TMRBADQU Timer for Bad ALDISCSTA Quality DISC T Statistic
BSC6900
Duration time for determinin g that a call is hung up because of poor quality. If the uplink quality or downlink quality in the measurem ent reports during the period of Timer for "Bad Quality DISC Statistic" is higher than the value of "Bad Quality Disconnect ion Threshold" before the SET call is GCELLSOFT(O disconnect ptional) ed, you GBFD-110501 Call Control
Upper time threshold of TMRISTHRD raised fault
BSC6900
Maximum rate of the accumulat ed alarm blink duration to the alarm blink measurem ent period. Assume this threshold is not 0. When the rate of accumulat ed alarm blink duration exceeds the threshold, an alarm is reported. For querying the alarm blink measurem ent period, SET see "LST ALMBLKPARA( ALMBLKS Faulty Optional) W". For MRFD-210304 Management CHK INNSPCH(Mand atory) STR CALLRESLOP( Mandatory) ADD GCSCHRUSER( TMSI of Mandatory) the MS
TMSI
TMSI
BSC6900
Lower time threshold of TMSTLTHRD raised fault
BSC6900
Minimum rate of the accumulat ed alarm blink duration to the alarm blink measurem ent period. Assume this threshold is not 0. When the rate of accumulat ed alarm blink duration is lower than the threshold, an alarm is reported. For querying the alarm blink measurem ent period, SET see "LST ALMBLKPARA( ALMBLKS Faulty Optional) W". For MRFD-210304 Management This timer is a protection timer waiting for a signalling link test acknowled gement message (SLTA) from the peer end after a signalling link test message SET (SLTM) is A Interface MTP3TMR(Opti sent to the Protocol onal) peer end. GBFD-111804 Process
TMT1TMR
Signalling link test ACK timer BSC6900
TMT2TMR
Signalling link repeat test timer
BSC6900
This timer is used to send the signalling link test messages (SLTM) to SET the peer A Interface MTP3TMR(Opti end Protocol onal) regularly. GBFD-111804 Process
TNAME
Data Table
BSC6900
Name of the data table CMP distributed TBLDATA(Optio on the Configuration nal) board. MRFD-210301 Management
TNMODE
Transmission Mode
BSC6900
The Ater signaling link operates in the terrestrial transmissi on or satellite transmissi on mode. In the areas such as desert and lake where the terrestrial transmissi on is ADD difficult, ATERSL(Option the al) satellite ADD transmissi ATERCONSL(O on can be ptional) used. GBFD-113903
Satellite Transmission over Ater Interface
TNMODE
Transmission Mode
BSC6900
E1 transmissi on type of the Pb interface. The terrestrial transmissi on or satellite transmissi on can be selected. In the areas such as desert and lake where the terrestrial transmissi on is difficult, the satellite ADD transmissi PBE1T1(Option on can be al) used. GBFD-111203 O&M of BSC
TO
AdjustMethod
BSC6900
SET TZ(Mandatory)
Offset to DST, Support of namely, Daylight the Saving Time adjustment GBFD-116101 Configuration to time. MRFD-210301 Management
TO
Cell Reselect Temporary Offset BSC6900
Cell Reselect Temporary Offset (TO) indicates the temporary correction of C2. This parameter is valid only within the value specified by "Cell Reselect Penalty Time". For details, see GSM Rec. 05.08 and 04.08. This parameter applies to SET only GSM GCELLIDLEAD( Phase II Basic Cell ReOptional) MSs. GBFD-110402 selection Number of the cabinet ADD where the BTSTOPCONFI board is G(Optional) located MRFD-211501 Number of the slot ADD where the BTSTOPCONFI board is G(Mandatory) located MRFD-211501 Number of the subrack ADD where the BTSTOPCONFI board is G(Optional) located MRFD-211501 IP-Based 2G/3G CoTransmission on Base Station Side IP-Based 2G/3G CoTransmission on Base Station Side IP-Based 2G/3G CoTransmission on Base Station Side
TOPBOARD TOP Board CN Cabinet No.
BSC6900
TOPBOARD TOP Board Slot SLOTNO No.
BSC6900
TOPBOARD TOP Board SRN Subrack No.
BSC6900
TP
Log Type
BSC6900
Type of the host log to be collected. If this parameter is set to NORMAL, the text log in the \common\f am\famlog directory of the OMU installation path is collected and saved in the \common\f am\famlog directory of the OMU installation path. If this parameter is set to FORMAT, the binary log in the COL \common\f FAMLOG(Mand am\famlogf atory) mt GBFD-111203 O&M of BSC Number of the optical ADD port where BTSRXUCHAIN the main (Mandatory) board of CBN the RXU BTSRXUCHAIN ring is (Mandatory) located. GBFD-111202 O&M of BTS
TPN
Tail Port No.
BSC6900
TQHO
Into-BSC HO REQ Queue Timer
BSC6900
Length of the timer that is started to wait for a channel requested by an incoming BSC handover request message. When the MSC allows the queuing of incoming BSC handover requests, the BSC6900 starts the queuing procedure and the timer if no channel is available for HUAWEI I SET assignmen Handover GCELLTMR(Opt t. If the GBFD-110601 HUAWEI II ional) channel GBFD-510501 Handover CPU usage threshold for debugging tracing flow control. When the average CPU usage of sliding windows reaches or exceeds the threshold, debugging SET tracing flow FCCPUTHD(Opt control is GSM Flow ional) triggered. GBFD-111705 Control
TRACECTH D
Debug tracking control threshold
BSC6900
TRACECTH D
Debug tracking control threshold
BSC6900
Packet queue usage threshold for debugging tracing flow control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, debugging tracing flow control is GSM Flow triggered. GBFD-111705 Control
TRACERTH D
Debug tracking restore threshold BSC6900
CPU usage threshold for recovery from debugging tracing flow control. When the average CPU usage of smooth windows is lower than the threshold, debugging SET tracing flow FCCPUTHD(Opt control is GSM Flow ional) stopped. GBFD-111705 Control
TRACERTH D
Debug tracking restore threshold BSC6900
Packet queue usage threshold for recovery from debugging tracing flow control. When the average packet queue usage of smooth windows is lower than the threshold, debugging tracing flow control is GSM Flow stopped. GBFD-111705 Control
TRACESW
Debug Flow control switch
BSC6900
Whether to control the SET debugging GSM Flow FCSW(Optional) tracing flow GBFD-111705 Control
DL Priority TrafficClassD Decision lCoefficient Threshold
BSC6900
Threshold for determinin g whether the uplink service is preferred. Within the "Flux Measurem ent Period", if the ratio of the downlink LLC PDU flux and uplink LLC PDU flux is higher than the threshold, the service type of the SET MS is BSCPSSOFTPA uplink RA(Optional) preferred. GBFD-119501
UL Priority TrafficClassU Decision lCoefficient Threshold
BSC6900
Threshold for determinin g whether the uplink service is preferred. Within the "Flux Measurem ent Period", if the ratio of the uplink LLC PDU flux and downlink LLC PDU flux is higher than the threshold, the service type of the SET MS is BSCPSSOFTPA uplink RA(Optional) preferred. GBFD-119501
TRAMODE
Traffic mode
BSC6900
Traffic mode of the M3UA link set. At present, only the active/stan dby and load sharing mode is available. If the M3UA links in the link set work in overriding mode, only one link in the link set works in the active mode, and all other links work in the standby mode. In this case, only the ADD active link M3LKS(Optional carries ) traffic, and GBFD-118602 A over IP
TransMode
Transmission Mode
BSC6900
This parameter specifies the data transmissi on mode between the BTS and the BSC6900. The license control modes are different in different transmissi on modes. Terrestrial Transmissi on: The data between the BTS and the BSC6900 is transmitted through the E1 or fiber. This SET transmissi BTSTRANS(Ma on mode ndatory) has a short GBFD-113901
Satellite Transmission over Abis Interface
TRANSSN
Load Transmitting Slot No. BSC6900
Slot number of the transparent ly ADD transmittin ABISLOADSHA g interface RE(Mandatory) board GBFD-111203 O&M of BSC Transport type of the adjacent node to ADD which the IPPATH(Optiona path l) belongs. GBFD-118605 IP QOS ADD TRMMAP(Optio Transport nal) type
TRANST
Transport Type
BSC6900
TRANST
Transport Type
BSC6900
GBFD-118605 IP QOS
TRANST
Transport Type
BSC6900
ADD TRMLOADTH(M Transport andatory) type SET BSCABISPRIM AP(Mandatory) SET BTSBWPARA( Mandatory)
GBFD-118605 IP QOS
TRANSTYPE Carrier Type BTS Transmission TRANSTYPE Type
BSC6900
Transmissi on type of the BTS GBFD-111202 O&M of BTS Transmissi on Type GBFD-118601 Abis over IP
BSC6900
E1 Port 0 Set Optical TRANSTYPE Transmission 0 Mode
BSC6900
Whether to configure the optical transmissi on mode for E1 port 0 of the BTS3006C /BTS3002 E. If the optical transmissi on mode is configured, the BSC6900 can connect to the BTS SET through BTSDOMUBP(O optical ptional) fibers. GBFD-111202 O&M of BTS
BSC6900
Whether to configure the optical transmissi on mode for E1 port 1 of the BTS3006C /BTS3002 E. If the optical transmissi on mode is configured, the BSC6900 can connect to the BTS SET through BTSDOMUBP(O optical ptional) fibers. GBFD-111202 O&M of BTS Whether to configure the optical transmissi on mode for E1 port 2 of the BTS3006C /BTS3002 E . If the optical transmissi on mode is configured, the BSC6900 can connect to the BTS SET through BTSDOMUBP(O optical ptional) fibers. GBFD-111202 O&M of BTS
BSC6900
BSC6900
Whether to configure the optical transmissi on mode for E1 port 3 of the BTS3006C /BTS3002 E. If the optical transmissi on mode is configured, the BSC6900 can connect to the BTS SET through BTSDOMUBP(O optical ptional) fibers. GBFD-111202 O&M of BTS Whether to enable the SET limit of the BTSCLKPARA( tracing Mandatory) range GBFD-111202 O&M of BTS
TRCRNGLM T Trace Mode
BSC6900
TRESEL
Cell Reselection Forbidden Time
BSC6900
SET GCELLRESELE Forbidden CTPARA(Option time of cell al) reselection GBFD-114101 GPRS The load handover is triggered when the traffic load in a cell is greater than the HUAWEI I SET value of Handover GCELLHOAD(O this GBFD-110601 HUAWEI II ptional) parameter. GBFD-510501 Handover Port number of ADD the ETHTRKLNK(M aggregatio Link andatory) n member MRFD-210103 aggregation
Load HO TRIGTHRES Threshold
BSC6900
TRKLNKPN
Trunk Link No.
BSC6900
TRKLNKSN
Trunk Link Slot No.
BSC6900
Slot number of ADD the ETHTRKLNK(M aggregatio Link andatory) n member MRFD-210103 aggregation ADD ETHTRK(Manda tory) ADD ETHTRKLNK(M andatory) ADD aggregatio ETHTRKIP(Man n group Link datory) number MRFD-210103 aggregation Specified TRMMAP index of the user panel
TRKN
Trunk No.
BSC6900
TRMI
User TRMMAP index
BSC6900
SET BSCABISPRIM AP(Mandatory)
TRMLOADT HINDEX
TRM load threshold index
BSC6900
TRM load threshold index. The TRM load ADD threshold IPPATH(Optiona must be l) configured. GBFD-118605 IP QOS
TRMLOADT HINDEX
BSC6900
ADD TRM load RSCGRP(Optio threshold nal) index
None
None
TRMLOADT HINDEX
BSC6900
TRM load threshold index. It is the unique ADD ID of the TRMLOADTH(M load andatory) threshold. None ADD TRM load PPPLNK(Option threshold al) index ADD TRM load MPGRP(Optiona threshold l) index ADD TRM load IPLOGICPORT( threshold Optional) index
None
TRMLOADT HINDEX
BSC6900
Abis IP over E1/T1 GBFD-118611 A IP over GBFD-118622 E1/T1 Abis IP over E1/T1 GBFD-118611 A IP over GBFD-118622 E1/T1
TRMLOADT HINDEX
BSC6900
TRMLOADT HINDEX
BSC6900
GBFD-118605 IP QOS
TRMLOADT HINDEX
BSC6900
SET BSCABISPRIM AP(Mandatory)
None
None
Transport Resource TRMMAPSW Mapping switch
BSC6900
Transmissi on resources mapping switch GBFD-111202 O&M of BTS
TRUNKN
The Trunk group No. BSC6900
Trunk group ADD number of IPLOGICPORT( the logical Optional) port None TRUNK STR group IPCHK(Optional) number ADD TRUNK ETHMEP(Mand group atory) number
None
TRUNKN
Trunk group No.
BSC6900
TRUNKN
Trunk No.
BSC6900
TRXAIDSWI TRX Aiding TCH Function Control
BSC6900
TRXDURATS Duration Second BSC6900
SET GCELLCCACC ESS(Optional) STR BTSTST(Manda tory) Duration
Whether to enable the TRX aiding function. Four aiding modes are available. BCCH aiding: The main BCCH is aided to another normal TRX in this cell. BCCH aiding switchback : BCCH aiding switchback functions after the originally configured BCCH TRX is recovered. Baseband FH aiding: When the TRX involved in TRX baseband GBFD-113801 Cooperation BTS Test GBFD-111207 Function
TRXHOPIND Channel Hop EX Index
BSC6900
Frequency hopping index of SET the GTRXCHANHO channel in P(Optional) the TRX GBFD-113701
TRXID
TRX ID
BSC6900
SET FHO(Mandatory) SET GTRXCHANHO P(Mandatory) SET GTRXHOP(Man datory) SET GTRXBASE(Ma ndatory) SET GTRXCHAN(Ma ndatory) SET GTRXFC(Manda tory) SET GTRXIUO(Mand atory) SET GTRXADMSTA T(Mandatory) SET GTRXCHANAD MSTAT(Mandat ory) ADD GTRX(Mandator y) ADD TRXBIND2PHY BRD(Mandatory) SET
Index of a TRX, uniquely identifying a TRX in a Configuration BSC6900. MRFD-210301 Management
TRXID
TRX ID
BSC6900
The ID of TRX added in the main location group, the TRX ID must be globally unique. The same TRX cannot be bound by the TRX boards in a same location ADD group for BTSBINDLOCG multiple RP(Mandatory) times. GBFD-510104 Multi-site Cell
TRXID1
No.1 TRX ID
BSC6900
TRXID10
No.10 TRX ID
BSC6900
TRXID11
No.11 TRX ID
BSC6900
TRXID12
No.12 TRX ID
BSC6900
TRXID13
No.13 TRX ID
BSC6900
TRXID14
No.14 TRX ID
BSC6900
TRXID15
No.15 TRX ID
BSC6900
TRXID16
No.16 TRX ID
BSC6900
TRXID17
No.17 TRX ID
BSC6900
TRXID18
No.18 TRX ID
BSC6900
TRXID19
No.19 TRX ID
BSC6900
TRXID2
No.2 TRX ID
BSC6900
TRXID20
No.20 TRX ID
BSC6900
TRXID21
No.21 TRX ID
BSC6900
TRXID22
No.22 TRX ID
BSC6900
TRXID23
No.23 TRX ID
BSC6900
TRXID24
No.24 TRX ID
BSC6900
ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional)
Index of TRX 1 Index of TRX 10 Index of TRX 11 Index of TRX 12 Index of TRX 13 Index of TRX 14 Index of TRX 15 Index of TRX 16 Index of TRX 17 Index of TRX 18 Index of TRX 19 Index of TRX 2 Index of TRX 20 Index of TRX 21 Index of TRX 22 Index of TRX 23 Index of TRX 24
GBFD-113703
GBFD-113703
GBFD-113703
GBFD-113703
GBFD-113703
GBFD-113703
GBFD-113703
GBFD-113703
GBFD-113703
GBFD-113703
GBFD-113703
GBFD-113703
GBFD-113703
GBFD-113703
GBFD-113703
GBFD-113703
GBFD-113703
Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping
TRXID3
No.3 TRX ID
BSC6900
TRXID4
No.4 TRX ID
BSC6900
TRXID5
No.5 TRX ID
BSC6900
TRXID6
No.6 TRX ID
BSC6900
TRXID7
No.7 TRX ID
BSC6900
TRXID8
No.8 TRX ID
BSC6900
TRXID9
No.9 TRX ID
BSC6900
ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) ADD GCELLHOPANT GRP(Optional) SET GCELLHOPQUI CKSETUP(Optio nal) SET GCELLHOPANT QUICKSETUP( Optional)
Index of TRX 3 Index of TRX 4 Index of TRX 5 Index of TRX 6 Index of TRX 7 Index of TRX 8 Index of TRX 9
GBFD-113703
GBFD-113703
GBFD-113703
GBFD-113703
GBFD-113703
GBFD-113703
GBFD-113703
Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping Antenna Frequency Hopping
TRXIDLST
TRXID LST
BSC6900
List of IDs of carriers for frequency hopping. GBFD-113701
TRXIDLST
TRX Index List
BSC6900
List of TRX indexes. You can specify one TRX index or more TRX indexes, for example, 1 or STR 0&1&2&&5 TRXPERFTST( in the BTS Test Mandatory) same BTS. GBFD-111207 Function
TRXMAIO
Channel MAIO
BSC6900
Mobile allocation index offset (MAIO) of SET the GTRXCHANHO channel in P(Optional) the TRX GBFD-113701
TRXNO
TRX No.
BSC6900
Number of a TRX in a BTS. The number of a TRX is ADD unique in a Configuration GTRX(Optional) BTS. MRFD-210301 Management ADD BTSBRDCAP(M andatory) ADD BTSRXUBRD(O ptional) Allowed number of carriers bound to a board. GBFD-111202 O&M of BTS
TrxNum
TRX Number
BSC6900
TRXPN
TRX Board Pass No. BSC6900
Number of the channel bound to the TRX on the TRX board. TRX Pass No. of the DTRU/DR RU/BTS39 00B of the BTS in separate mode must be 0 or 1; TRX Pass No. of the QTRU/MR FU/GRFU/ BTS3900E of the BTS in separate mode must be 0 to 5; TRX Pass No. of the GRRU/MR RU of the BTS in separate ADD mode TRXBIND2PHY should in 0 BRD(Mandatory) to 7. GBFD-111202 O&M of BTS TRX board pass number in the sublocation group to which the TRX of the main ADD location BTSBINDLOCG group is RP(Mandatory) bound GBFD-510104 Multi-site Cell
TRXPN
Sub-Location Group TRX Board Pass No. BSC6900
TRXPRIALL OW
Allocation TRX Priority Allowed
BSC6900
This parameter specifies whether the TRX priority is considered during channel assignmen t. When the parameter is set to YES, the smaller the parameter "TRX Priority" in the command "SET GTRXDEV " is, the higher priority the TRX is. Under other conditions, channels SET are GCELLCHMGA preferential D(Optional) ly allocated GBFD-111005
TRXTP
TRX Board Type BSC6900
Type of the ADD TRX board TRXBIND2PHY bound to BRD(Mandatory) the TRX GBFD-111202 O&M of BTS
TS
Time Slot
BSC6900
It indicates the Ater BLK interface Ater Interface ATERE1T1(Man timeslot 4:1 datory) number GBFD-111801 Multiplexing
TS
Time Slot
BSC6900
It indicates the A interface timeslot number. The parameter BLK supports A Interface AE1T1(Mandato multiple Circuit ry) values. GBFD-111803 Management
TS
time slot No.
BSC6900
LOP E1T1(Mandatory ) STR E1T1TST(Optio Timeslot nal) number
None
None
TS
Bearing Timeslot BSC6900
ADD BC(Mandatory)
Timesolt of bearing channels GBFD-510002 Gb Over FR
TS
Time Slot NO.
BSC6900
Number of SET the BTSOMLTS(Ma timeslot on ndatory) the port GBFD-111203 O&M of BSC
TSBITMAP
Bearing time slot BSC6900
Bearer Abis IP over ADD E1/T1 port E1/T1 PPPLNK(Manda timeslot of GBFD-118611 A IP over tory) PPP link. GBFD-118622 E1/T1
TSBITMAP
Bearing time slot BSC6900
Bearer Abis IP over ADD E1/T1 port E1/T1 MPLNK(Mandat timeslot of GBFD-118611 A IP over ory) MP link. GBFD-118622 E1/T1
TSBITMAP
Bearing Time Slot BSC6900
ADD BTSPPPLNK(M andatory) ADD BTSMPLNK(Ma ndatory) IMP BTSPPPLNK(M andatory) IMP BTSMPLNK(Ma ndatory)
Timeslot of the E1/T1 link carrying the PPP link. The timeslot of an E1 port cannot be used by different Abis IP over PPP links. GBFD-118611 E1/T1
TSC
TSC
BSC6900
TSCOUNT
Idle TS Count
BSC6900
The TSC is short for the Training Sequence Code. The TSC must be the same as the BCC. The delay equalizatio n is performed by using the specified TSC when the MS or BTS receives the signal. The demodulati on cannot be received because the delay Frequency equalizatio Hopping (RF ADD n cannot hopping, GCELLMAGRP( be baseband Optional) performed GBFD-113701 hopping) Number of idle timeslots. You can configure up to 128 idle timeslots for the BTS at a time. A BTS can be configured SET with up to BTSIDLETS(Ma 512 idle GBFD-114101 GPRS ndatory) timeslots. GBFD-117301 Flex Abis
TSCPLANEN TSC Plan Enable BSC6900 Time slot cross TSCROSSX index Duration * 10 minutes
BSC6900
TSDURAT
BSC6900
Whether to allow TSC planning. If this parameter is set to No, the TSC values in all MA groups of the cell cannot be modified. In this case, the TSC values are automatica lly refreshed SET to the BCC GCELLSOFT(O values of ptional) the cell. GBFD-118201 ADD TSCROSS(Opti Timeslot onal) cross index None STR Duration in TRANSPERFTS timeslot T(Mandatory) mode GBFD-111207
SoftSynchronized Network
None BTS Test Function
TSIDX
Timeslot Index
BSC6900
Index of the monitoring timeslot. ADD The index SemiBTSMONITORT is unique Permanent S(Optional) in a BTS. GBFD-114701 Connection ADD SCHTSK(Manda tory) SET SCHTSKSW(Op tional) ADD SUBTSK(Option al) ADD SUBCMD(Optio nal) STR SCHTSK(Option al)
TSKN
Task Name
BSC6900
Name of the scheduled task. GBFD-111203 O&M of BSC
TSMASK
Timeslot Mask
BSC6900
Time slots for Ater operation and maintenan ce. These time slots are provided by the ports connected ADD to the Ater ATEROML(Man connection Configuration datory) path. MRFD-210301 Management
TSMASK
TS Mask
BSC6900
ADD BTSABISHDLC PATH(Mandator y) ADD BTSTOPCONFI G(Mandatory)
The 64 kbit/s timeslots on the port are numbered from 1 to 31. MRFD-211501
TSN
Tail Slot No.
BSC6900
Number of the slot where the main board of the RXU ring is ADD located. BTSRXUCHAIN The slot (Mandatory) No. is CBN unique in BTSRXUCHAIN the same (Mandatory) BTS. GBFD-111202 O&M of BTS Timeslot number of ADD Pb PBSL(Mandator signaling y) link GBFD-111203 O&M of BSC
TSNO
Timeslot No.
BSC6900
TSPRIORITY Timeslot Priority
BSC6900
Assignmen t priority level of the channel. If this parameter is less, the assignmen t priority SET level of the GTRXCHAN(Op channel is tional) higher. GBFD-111005
TSPWRRES Timeslot Power ERVE Reserve
BSC6900
Fast Flux TSRAPIDAD Measurement JPERIOD TBF Timer
BSC6900
Maximum degree by which the output power of the multidensity TRX board can exceed the maximum output Enhanced SET power Channel GTRXDEV(Opti within a Assignment onal) short time GBFD-111005 Algorithm Fast flux measurem ent duration. Normal flux measurem ent is performed after the fast flux measurem ent lasts over the Adaptive period Adjustment of SET specified Uplink and BSCPSSOFTPA by this Downlink RA(Optional) parameter. GBFD-119501 Channels
TSRAPIDAD Fast Flux JSWITCH Detection Switch BSC6900
Whether to enable fast flux detection. When this parameter is set to Open, fast timeslot adjustment is possible SET after the BSCPSSOFTPA TBF is set RA(Optional) up. GBFD-119501
TSRATE
Time Slot Rate
BSC6900
ADD Rate of the SemiBTSMONITORT monitoring Permanent S(Mandatory) timeslot GBFD-114701 Connection Number of the subrack where the main board of the RXU ring is located. ADD The BTSRXUCHAIN subrack (Mandatory) No. is CBN unique in BTSRXUCHAIN the same (Mandatory) BTS. GBFD-111202 O&M of BTS
TSRN
Tail Subrack No. BSC6900
TSTMODE
Test Mode
BSC6900
TSTTIMESL OT Test Timeslot
BSC6900
STR BTSTST(Manda BTS Test tory) Test mode GBFD-111207 Function STR TRANSPERFTS Test T(Mandatory) timeslot GBFD-111202 O&M of BTS STR BTSBATTTST( Mandatory)
TSTTYPE
Test Type
BSC6900
Type of BTS Test battery test GBFD-111207 Function
TSTTYPE
Test Type
BSC6900
Test Type. PIM:passiv STR e BTSRFTST(Man intermodul datory) ation test. GBFD-111202 O&M of BTS
TsTurningOff Allow Turning Off Enable Time Slot BSC6900
This parameter specifies whether to allow the BTS to enable the TRX Intelligent Shutdown on Timeslot Level feature. When this parameter is set to YES and the BTS supports this feature, the BTS will periodically report the number of times that the TRX is shut down SET on the BSCDSTPA(Opt timeslot ional) level. GBFD-111603
TRX Power Amplifier Intelligent Shutdown on Timeslot Level
TT
Topo Type
BSC6900
RXU topology type, that is, RXU ring topology or RXU chain topology. In the case of the ring topology, the optical ports of the head and tail boards must be specified. In the case of the chain topology, only the optical port of the head ADD board must BTSRXUCHAIN be (Mandatory) specified. GBFD-111202 O&M of BTS TTL(Time to Live) of the PING packet
TTL
Time to Live
BSC6900
PING IP(Optional)
None
None
TTL
PKT TTL
BSC6900
Indicates the live TRC time of the MAC(Optional) packet for TRC CFM link BTSCFM(Option tracing al) detection None
None
TURNOFFC Dyn. Turning Off ELLCHANNU Cell Busy M Channel Num.
BSC6900
If the number of channels (including PDCH and TCH) occupied on a cell that can be disabled is lower than this threshold, the procedure for disabling SET the cell GCELLDYNTUR can be Dynamic Cell NOFF(Optional) triggered. GBFD-111610 Power Off This parameter specifies the end time of a period during SET which the GCELLDYNTUR cell is Dynamic Cell NOFF(Optional) disabled. GBFD-111610 Power Off This parameter specifies the start time of a period during SET which the GCELLDYNTUR cell is Dynamic Cell NOFF(Optional) disabled. GBFD-111610 Power Off
TURNOFFC Dyn. Turning Off ELLSTPTIME Cell Stop Time
BSC6900
TURNOFFC ELLSTRTIM E
Dyn. Turning Off Cell Start Time
BSC6900
TURNOFFE NABLE
Enable Turning Off Cell
BSC6900
This parameter specifies whether to enable the Dynamic Cell Power Off feature. When this parameter is set to ENABLE, the BSC can disable the cell within the period of time specified by "TURNOF FCELLST RTIME" and "TURNOF FCELLST PTIME"; When this parameter is set to SET DISABLE, GCELLDYNTUR the BSC NOFF(Mandator will never Dynamic Cell y) disable the GBFD-111610 Power Off When the load of the same coverage cell is higher than this threshold for a period, the SET disabled GCELLDYNTUR cell is Dynamic Cell NOFF(Optional) enabled. GBFD-111610 Power Off
TURNONCE Dyn. Turning On LLLOADTHR Cell Load D Threshold
BSC6900
TUTHD
Temperature Alarm Upper Threshold
BSC6900
Temperatu re alarm upper threshold. If the temperatur e of the battery is higher than the value of this parameter, an alarm indicating the abnormal temperatur e is reported. In multimode scenario, the value of this parameter in one mode must be the same as the value of the SET correspond BTSAPMUBP(O ing ptional) parameter GBFD-111202 O&M of BTS
TUTHD
Temperature Alarm Upper Threshold
BSC6900
Temperatu re upper threshold of the cabinet. When the cabinet temperatur e is higher than this parameter, an alarm indicating the abnormal cabinet temperatur e is reported. In multimode scenario, the value of this parameter in one mode must be the same as the value of the SET correspond BTSDHEUBP(O ing ptional) parameter GBFD-111202 O&M of BTS Value of the timer for reserving the channels ADD in the AISSCFG(Optio observed nal) cell Value of the timer for reserving the TRXs ADD in the AISSCFG(Optio observed nal) cell
TWFCMCHI DLE
Observation Cell Channel Reservation Timer
BSC6900
Observation Cell TWFCMTRXI TRX Reservation DLE Timer BSC6900
Serving Cell TCHF TWFCSCHID Reservation LE Timer
BSC6900
Value of the timer for reserving ADD the TCHFs SoftAISSCFG(Optio in the Synchronized nal) serving cell GBFD-118201 Network Value of the timer for waiting for the response ADD to SoftAISSCFG(Optio information Synchronized nal) collection GBFD-118201 Network Value of the timer ADD for SoftAISSCFG(Optio searching Synchronized nal) for the MS GBFD-118201 Network Value of the timer for activating the ADD reserved SoftAISSCFG(Optio resources Synchronized nal) of the BTS GBFD-118201 Network Value of the timer for waiting for the synchroniz ADD ation report SoftAISSCFG(Optio from the Synchronized nal) BTS GBFD-118201 Network
Information TWFRRMRS Collection P Response Timer
BSC6900
TWFSEEKM S MS Search Timer BSC6900
BTS Reserved TWFSYNCA Resource CK Activation Timer
BSC6900
BTS TWFSYNCR SYNC_REPORT PT Timer BSC6900
TX
TX-integer
BSC6900
Tx-integer (T for short). This parameter specifies the number of timeslots between two transmissi ons when an MS sends multiple consecutiv e channel requests. The access algorithm is defined in GSM Rec. 04.08 to reduce the collisions on the RACH and Radio improve Common the Channel efficiency Management of the GBFD-111003 Location RACH. GBFD-110301 Updating
TXAOPER1
Assigned Power of Pass A Operators 1
BSC6900
The maximum power that operators 1 can use on SET pass A of BTSRXUBP(Opt MRRU ional) board. GBFD-118701 RAN Sharing The maximum power that operators 2 can use on SET pass A of BTSRXUBP(Opt MRRU ional) board. GBFD-118701 RAN Sharing
TXAOPER2
BSC6900
TXAOPER3
BSC6900
The maximum power that operators 3 can use on SET pass A of BTSRXUBP(Opt MRRU ional) board. GBFD-118701 RAN Sharing The maximum power that operators 4 can use on SET pass A of BTSRXUBP(Opt MRRU ional) board. GBFD-118701 RAN Sharing The maximum power that operators 1 can use on SET pass B of BTSRXUBP(Opt MRRU ional) board. GBFD-118701 RAN Sharing The maximum power that operators 2 can use on SET pass B of BTSRXUBP(Opt MRRU ional) board. GBFD-118701 RAN Sharing The maximum power that operators 3 can use on SET pass B of BTSRXUBP(Opt MRRU ional) board. GBFD-118701 RAN Sharing The maximum power that operators 4 can use on SET pass B of BTSRXUBP(Opt MRRU ional) board. GBFD-118701 RAN Sharing ADD Transmit IPPATH(Mandat bandwidth ory) of IP path GBFD-118605 IP QOS
TXAOPER4
BSC6900
TXBOPER1
Assigned Power of Pass B Operators 1
BSC6900
TXBOPER2
BSC6900
TXBOPER3
BSC6900
TXBOPER4
Assigned Power of Pass B Operators 4 Forward Bandwidth
BSC6900
TXBW
BSC6900
TxBw
Forward Bandwidth
BSC6900
ADD RSCGRP(Mand Transmit atory) bandwidth GBFD-118605 IP QOS Indicates the interval between the two sent PING packets None
TXINT
Interval of send[ms]
BSC6900
PING IP(Optional)
None
TXINT
TX_INT
BSC6900
TYPE
Subrack Type
BSC6900
Extension transmissi on timeslots of random access. This parameter determines the interval of sending another channel request after the SET MS fails to GCELLPRACH( request a Optional) channel. GBFD-119110 Access ADD SUBRACK(Man Type of the Configuration datory) subrack MRFD-210301 Management
TYPE
Finish Type
BSC6900
Explanatio n of the finish type of the batch commands 1. ANY_ERR _RETURN: If there is a command whose execution fails, the execution of the batch commands is stopped and the execution of the file fails. 2. ALL_END_ RETURN: If all commands in the batch file are RUN executed BATCHFILE(Ma in one ndatory) operation, GBFD-111203 O&M of BSC
TYPE
Freq. Band
BSC6900
This parameter specifies the frequency band of new cells. Each new cell can be allocated frequencie s of only one frequency band. Once the frequency band is selected, it cannot be changed. GSM900: The cell supports GSM900 frequency band. DCS1800: The cell supports DCS1800 ADD frequency GCELL(Mandato band. Frequency ry) GSM900_ GBFD-110101 Band
TYPE
PCU Type
BSC6900
SET BSCPCUTYPE( Type of the Mandatory) PCU GBFD-114101 GPRS
TYPE
Freq. Band
BSC6900
Frequency band to which the newly added cell belongs. Only one frequency band can be selected as the frequency band of each new cell and it cannot be changed after the selection. To modify the frequency band of the new cell, you must delete the ADD cell and BTSAUTOPLAN then add it (Mandatory) again. GBFD-510701
TYPE
Cabinet Type
BSC6900
ADD BTSCABINET(O Type of a ptional) cabinet
TYPE
Cell Type
BSC6900
Cell type. Currently, the fast BTS constructio n is available for only ADD GSM900 GCELLQUICKS and ETUP(Mandator DCS1800 y) cells. GBFD-111202 O&M of BTS SET BTSANTFEEDE RCONNECT(Op tional) Power attenuation factor of uplink tributary 0 GBFD-111202 O&M of BTS
U0GEN
Up0 Power Attenuation Factor
BSC6900
U0TOW
Up0 Tower-Top Amplifier Flag
BSC6900
SET BTSANTFEEDE RCONNECT(Op tional)
Whether there is a TMA on uplink tributary 0 GBFD-111202 O&M of BTS
U0TRX
Up0 Link No.
BSC6900
Index of uplink tributary 0. Each uplink tributary can be configured with a maximum of 12 TRXs. This parameter indicates the serial SET number of BTSANTFEEDE a TRX on RCONNECT(Op the uplink tional) tributary. GBFD-111202 O&M of BTS TRX board pass SET number BTSANTFEEDE connected RCONNECT(Op to uplink tional) tributary 0 GBFD-111202 O&M of BTS Number of the slot where the TRX board that SET connects BTSANTFEEDE to uplink RCONNECT(Op tributary 0 tional) is located GBFD-111202 O&M of BTS Number of the subrack where the TRX board that SET connects BTSANTFEEDE to uplink RCONNECT(Op tributary 0 tional) is located GBFD-111202 O&M of BTS
U0TRXBPN
Up0 TRX Board Pass No.
BSC6900
U0TRXSN
Up0 TRX Slot No. BSC6900
U0TRXSRN
Up0 TRX Subrack No.
BSC6900
U1GEN
Up1 Power Attenuation Factor
BSC6900
SET BTSANTFEEDE RCONNECT(Op tional) SET BTSANTFEEDE RCONNECT(Op tional)
Power attenuation factor of uplink tributary 1 GBFD-111202 O&M of BTS Whether there is a TMA on uplink tributary 1 GBFD-111202 O&M of BTS
U1TOW
Up1 Tower-Top Amplifier Flag
BSC6900
U1TRX
Up1 Link No.
BSC6900
Index of uplink tributary 1. Each uplink tributary can connect to a maximum of 12 TRXs. This parameter indicates the serial SET number of BTSANTFEEDE a TRX on RCONNECT(Op the uplink tional) tributary. GBFD-111202 O&M of BTS TRX board pass SET number BTSANTFEEDE connected RCONNECT(Op to uplink tional) tributary 1 GBFD-111202 O&M of BTS Number of the slot where the TRX board that SET connects BTSANTFEEDE to uplink RCONNECT(Op tributary 1 tional) is located GBFD-111202 O&M of BTS
U1TRXBPN
Up1 TRX Board Pass No.
BSC6900
U1TRXSN
Up1 TRX Slot No. BSC6900
U1TRXSRN
Up1 TRX Subrack No.
BSC6900
Number of the subrack where the TRX board that SET connects BTSANTFEEDE to uplink RCONNECT(Op tributary 1 tional) is located GBFD-111202 O&M of BTS Service priority of call reestablish ment when CS services are preferred. This parameter is used for the flow control in SET the case of CSABISCONGC Abis over TRL(Optional) IP/HDLC. GBFD-118601 Abis over IP Service priority of the CS emergency call when CS services are preferred. This parameter is used for the flow control in SET the case of CSABISCONGC Abis over TRL(Optional) IP/HDLC. GBFD-118601 Abis over IP
CS Preferred Call ucCSPrefCall Reestablish ReestPrio Priority BSC6900
ucCSPrefCS CS Preferred CS EmergCallPri Emergency Call o Priority BSC6900
ucCSPrefCS CS Preferred CS OrgCallPrio MOC Priority BSC6900
Service priority of the CS MSoriginated call when CS services are preferred. This parameter is used for the flow control in SET the case of CSABISCONGC Abis over TRL(Optional) IP/HDLC. GBFD-118601 Abis over IP Service priority of the CS MSterminated call when CS services are preferred. This parameter is used for the flow control in SET the case of CSABISCONGC Abis over TRL(Optional) IP/HDLC. GBFD-118601 Abis over IP Service priority of the incoming BSC handover when CS services are preferred. This parameter is used for the flow control in SET the case of CSABISCONGC Abis over TRL(Optional) IP/HDLC. GBFD-118601 Abis over IP
ucCSPrefCS CS Preferred CS TermCallPrio MTC Priority BSC6900
ucCSPrefInB CS Preferred IntoscHoPrio BSC HO Priority BSC6900
CS Preferred ucCSPrefIntr Intra-BSC HO aBscHoPrio Priority
BSC6900
Service priority of the intraBSC handover when CS services are preferred. This parameter is used for the flow control in SET the case of CSABISCONGC Abis over TRL(Optional) IP/HDLC. GBFD-118601 Abis over IP Priority of other services when CS services are preferred. This parameter is used for the flow control in SET the case of CSABISCONGC Abis over TRL(Optional) IP/HDLC. GBFD-118601 Abis over IP PS service priority when CS services are preferred. This parameter is used for the flow control in SET the case of CSABISCONGC Abis over TRL(Optional) IP/HDLC. GBFD-118601 Abis over IP
CS Preferred ucCSPrefOth Other Service erPrio Priority
BSC6900
ucCSPrefPS CS Preferred PS Prio Priority BSC6900
CS Preferred ucCSPrefSup Supplement plePrio Priority
BSC6900
Priority of supplemen tary services when CS services are preferred. This parameter is used for the flow control in SET the case of CSABISCONGC Abis over TRL(Optional) IP/HDLC. GBFD-118601 Abis over IP VBS service priority when CS services are preferred. This parameter is used for the flow control in SET the case of CSABISCONGC Abis over TRL(Optional) IP/HDLC. GBFD-118601 Abis over IP VGCS service priority when CS services are preferred. This parameter is used for the flow control in SET the case of CSABISCONGC Abis over TRL(Optional) IP/HDLC. GBFD-118601 Abis over IP
ucCSPrefVB CS Preferred SPrio VBS Priority
BSC6900
ucCSPrefVG CS Preferred CSPrio VGCS Priority
BSC6900
Controlling of CIC IE In BSS Map ucCtrlOfCicIE Messages BSC6900
In A over IP, if the parameter is set to ON, the circuit IE in the A interface extended signaling must be processed in the same way as that in A over nonIP. Otherwise, the A interface extended signaling cannot SET carry MSGSOFTPAR circuit-type A(Optional) IE. GBFD-118602 A over IP
UCISRAIFAU LT RAI Alarm Switch BSC6900
Whether the BSC selects the TCHs on the link that reports an RAI alarm. GBFD-111005
PS Preferred Call ucPSPrefCall Reestablish ReestPrio Service Priority BSC6900
Reestablis h service SET priority of a PSPREFABISC PS ONGCTRL(Opti preferred onal) call GBFD-118601 Abis over IP CS emergency call service SET priority of a PSPREFABISC PS ONGCTRL(Opti preferred onal) call GBFD-118601 Abis over IP CS original call service SET priority of a PSPREFABISC PS ONGCTRL(Opti preferred onal) call GBFD-118601 Abis over IP CS terminated call service SET priority of a PSPREFABISC PS ONGCTRL(Opti preferred onal) call GBFD-118601 Abis over IP BSC handover service SET priority of a PSPREFABISC PS ONGCTRL(Opti preferred onal) call GBFD-118601 Abis over IP BSC intra handover service SET priority of a PSPREFABISC PS ONGCTRL(Opti preferred onal) call GBFD-118601 Abis over IP Other service SET priority of a PSPREFABISC PS ONGCTRL(Opti preferred onal) call GBFD-118601 Abis over IP SET PSPREFABISC ONGCTRL(Opti onal) PS service priority of a PS preferred call GBFD-118601 Abis over IP
ucPSPrefCS PS Preferred CS EmergCallPri Emergency Call o Service Priority BSC6900
PS Preferred CS ucPSPrefCS Original Call OrgCallPrio Service Priority BSC6900
PS Preferred CS ucPSPrefCS Terminated Call TermCallPrio Service Priority BSC6900
PS Preferred In ucPSPrefInB Handover Service scHoPrio Priority BSC6900
PS Preferred ucPSPrefIntr Intra Handover aBscHoPrio Service Priority
BSC6900
PS Preferred ucPSPrefOth Other Service erPrio Priority
BSC6900
ucPSPrefPS PS Preferred PS Prio Service Priority BSC6900
PS Preferred ucPSPrefSup Supplement plePrio Service Priority
BSC6900
Suppleme nt service SET priority of a PSPREFABISC PS ONGCTRL(Opti preferred onal) call GBFD-118601 Abis over IP VBS service SET priority of a PSPREFABISC PS ONGCTRL(Opti preferred onal) call GBFD-118601 Abis over IP VGCS service SET priority of a PSPREFABISC PS ONGCTRL(Opti preferred onal) call GBFD-118601 Abis over IP In case of intra-BSC, if this parameter is set to ON, the same channel type and voice version as those of the original SET channel AITFOTHPARA( are Optional) selected. GBFD-118602 A over IP
PS Preferred ucPSPrefVB VBS Service SPrio Priority
BSC6900
PS Preferred ucPSPrefVG VGCS Service CSPrio Priority
BSC6900
Speech Ver ucSpeechVer Change Optimize OptiInHo in Handover BSC6900
UDPMUXMO Receive UDP DRECV MUX Mode
BSC6900
UDP multiplexin g mode of the receiving party. The mode that does not support the function of compressi ng the RTP header indicates that the receiving party supports the UDP MUX RTP header but not the function of compressi ng the RTP header. The mode that supports Abis MUX ADD the UDP MUX for IPMUX(Mandato function of GBFD-118604 A ry) compressi GBFD-118610 Transmission
UDPMUXMO Sender UDP DSEND MUX Mode
BSC6900
UDP multiplexin g mode of the sending party. If the mode that does not support the function of compressi ng the RTP header indicates that the sending party supports the UDP MUX RTP header but not the function of compressi ng the RTP header. The mode that supports Abis MUX ADD the UDP MUX for IPMUX(Mandato function of GBFD-118604 A ry) compressi GBFD-118610 Transmission UDP port number of the local NSVL. The setting of this parameter must be consistent with the ADD setting at NSVLLOCAL(M the SGSN andatory) side. GBFD-118603 Gb over IP
UDPPN
Local UDP Port No.
BSC6900
UDPPN
Remote UDP Port No. BSC6900
UDP port number of the remote NSVL. The setting of this parameter must be consistent with the ADD setting at NSVLREMOTE( the SGSN Mandatory) side. GBFD-118603 Gb over IP Group to which the operator belongs. This parameter is used to limit the O&M of BSC right of the GBFD-111203 Security operator. MRFD-210305 Management
UG
Operator Level
BSC6900
ADD OP(Optional)
UHUMTHD
Upper Humidity Threshold
BSC6900
Upper humidity threshold for the environme nt alarm box to report an alarm indicating that the ambient humidity is too high. If the ambient humidity of the BTS is higher than this threshold, the environme nt alarm box reports the alarm. In multimode scenario, the value of this SET parameter BTSEXD(Option in one al) mode must GBFD-111202 O&M of BTS Used to identify the uplink access Public Voice message Group Call from the Service SET MS. The Public Voice GCELLGSMR(O value 64 is GBFD-510301 Broadcast ptional) invalid. GBFD-510302 Service Unit time STR for the E1T1TST(Optio error code nal) ratio test None
UIC
UIC
BSC6900
UINTTIME
Unit time[ms]
BSC6900
None
UL
Upper Limit
BSC6900
Upper limit SET for ALMPORT(Opti triggering Faulty onal) an alarm MRFD-210304 Management
UL
Upper Limit
BSC6900
Upper limit of the alarm. This parameter is valid for the analog Faulty port. MRFD-210304 Management
ULADJPRD
PwrCtrlULAdjPeri od BSC6900
Minimum interval between two consecutiv e uplink SET power HUAWEI III GCELLPWR3(O control Power Control ptional) commands GBFD-117601 Algorithm Current call is an AMR fullrate call, and when the uplink receive quality is greater than the threshold, Huawei III SET power HUAWEI III GCELLPWR3(O control is Power Control ptional) performed. GBFD-117601 Algorithm Current call is an AMR fullrate call, and when the uplink receive quality is lower than the threshold, Huawei III SET power HUAWEI III GCELLPWR3(O control is Power Control ptional) performed. GBFD-117601 Algorithm
ULAFSREXQ UALHIGHTH ULAFSRexQualH RED ighThred BSC6900
ULAFSREXQ UALLOWTH ULAFSRexQualL RED owThred BSC6900
ULAHSREX QUALHIGHT ULAHSRexQualH HRED ighThred BSC6900
Current call is an AMR halfrate call, and when the uplink receive quality is greater than the threshold, Huawei III SET power HUAWEI III GCELLPWR3(O control is Power Control ptional) performed. GBFD-117601 Algorithm Current call is an AMR halfrate call, and when the uplink receive quality is lower than the threshold, Huawei III SET power HUAWEI III GCELLPWR3(O control is Power Control ptional) performed. GBFD-117601 Algorithm
ULAHSREX QUALLOWT ULAHSRexQualL HRED owThred BSC6900
ULBQLASTTI UL BQ HO Last ME Time
BSC6900
The P/N criterion must be met for triggering a UL BQ handover. That is, the UL BQ handover can be triggered only if P measurem ent reports among N measurem ent reports meet the triggering conditions. This parameter correspond ADD s to P in G2GNCELL(Opti the P/N HUAWEI II onal) criterion. GBFD-510501 Handover
ULBQSTATT UL BQ HO Static IME Time BSC6900
The P/N criterion must be met for triggering a UL BQ handover. That is, the UL BQ handover can be triggered only if P measurem ent reports among N measurem ent reports meet the triggering conditions. This parameter correspond ADD s to N in G2GNCELL(Opti the P/N HUAWEI II onal) criterion. GBFD-510501 Handover If the ratio of uplink flux to downlink flux is greater than or equal to the threshold during the fast flux measurem ent, the uplink SET services BSCPSSOFTPA takes RA(Optional) priority. GBFD-119501
ULCOEFFICI Fast UL Priority ENTTSRAPI Decision DADJ Threshold
BSC6900
ULDATAFW DTMR
Timer for UL Data Forward BSC6900
Duration for uplink data transmissi on on the original channel if the TC resources are changed SET before and GCELLTMR(Opt after the ional) handover GBFD-111203 O&M of BSC Number of downlink GRPS TBF RLC blocks sent SET before BSCPSSOFTPA RRBP field RA(Optional) is sent GBFD-119105 RLC Mode If the UL receive level remains lower than the "Edge HO UL RX_LEV Threshold" for a period, the edge HUAWEI I SET handover Handover GCELLHOBASI is GBFD-110601 HUAWEI II C(Optional) triggered. GBFD-510501 Handover Number of downlink GRPS TBF RLC blocks sent SET before BSCPSSOFTPA RRBP field RA(Optional) is sent GBFD-119105 RLC Mode Period of acknowled ging the EGPRS SET TBF RLC BSCPSSOFTPA uplink data RA(Optional) block GBFD-119105 RLC Mode
ulDlAckFreq
RRBP Frequency for GPRS Downlink TBF BSC6900
ULEDGETH RES
Edge HO UL RX_LEV Threshold
BSC6900
RRBP Frequency ulEgprsDlAck for EGPRS Freq Downlink TBF BSC6900
ACK Frequency ulEgprsUlAck for EGPRS Freq Uplink TBF
BSC6900
ULFILTADJF III UL Filter Adjust ACTOR Factor BSC6900
Filter adjustment factor for uplink power control. If this parameter is set to a large value, the filtered values become smooth, thus reducing the impact of poor measurem ent reports on the filtered values. If this parameter is set to a small value, the filter values are SET close to HUAWEI III GCELLPWR3(O the actual Power Control ptional) ones and GBFD-117601 Algorithm Current call is a fullrate call, and when the uplink receive quality is greater than the threshold, Huawei III SET power HUAWEI III GCELLPWR3(O control is Power Control ptional) performed. GBFD-117601 Algorithm
ULFSREXQU ALHIGHTHR ULFSRexQualHig ED hThred BSC6900
ULFSREXQU ALLOWTHR ULFSRexQualLo ED wThred BSC6900
Current call is a fullrate call, and when the uplink receive quality is lower than the threshold, Huawei III SET power HUAWEI III GCELLPWR3(O control is Power Control ptional) performed. GBFD-117601 Algorithm Current call is a half-rate call, and when the uplink receive quality is greater than the threshold, Huawei III SET power HUAWEI III GCELLPWR3(O control is Power Control ptional) performed. GBFD-117601 Algorithm Current call is a half-rate call, and when the uplink receive quality is lower than the threshold, Huawei III SET power HUAWEI III GCELLPWR3(O control is Power Control ptional) performed. GBFD-117601 Algorithm
ULHSREXQ UALHIGHTH ULHSRexQualHi RED ghThred BSC6900
ULHSREXQ UALLOWTH ULHSRexQualLo RED wThred BSC6900
ULHYSTF1
AMR UL Coding Rate adj.hyst1[F] BSC6900
Based on the RQI in the call measurem ent report, the BTS and MS automatica lly adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carriertointerferenc e ratio (CIR) of the call. If SET RQI equals GCELLCCAMR( 1, the CIR Optional) is 0.5 dB; if GBFD-115501 AMR FR
ULHYSTF2
ULHYSTF3
ULHYSTH1
AMR UL Coding Rate adj.hyst1[H] BSC6900
Based on the RQI in the call measurem ent report, the BTS and MS automatica lly adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carriertointerferenc e ratio (CIR) of the call. If SET RQI equals GCELLCCAMR( 1, the CIR Optional) is 0.5 dB; if GBFD-115502 AMR HR
ULHYSTH2
ULHYSTH3
AMR UL Coding Rate ULHYSTWB1 adj.hyst1[WB]
BSC6900
Based on the RQI in the call measurem ent report, the BTS and MS automatica lly adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carriertointerferenc e ratio (CIR) of the call. If SET RQI equals GCELLCCAMR( 1, the CIR Optional) is 0.5 dB; if GBFD-115507 WB AMR
AMR UL Coding Rate ULHYSTWB2 adj.hyst2[WB]
BSC6900
Based on the RQI in the call measurem ent report, the BTS and MS automatica lly adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carriertointerferenc e ratio (CIR) of the call. If SET RQI equals GCELLCCAMR( 1, the CIR Optional) is 0.5 dB; if GBFD-115507 WB AMR When the uplink load of a cell is larger than the value of this parameter and is smaller than "2G Cell UL Overload Congest Thred", the uplink of the cell is SET in the GCELLHOINTE basic RRATLDB(Optio congestion nal) status. GBFD-511103
UlLdrThrd2G 2G Cell UL Basic Cell Congest Thred BSC6900
ULLEVFILTL Filter Length for EN UL RX_LEV
BSC6900
When the network receives measurem ent reports, in considerati on of the accuracy of a single measurem ent report, the measurem ent values in certain measurem ent reports are filtered to represent the radio operating environme nt. This parameter specifies the number of measurem ent reports SET sampled Enhanced GCELLPWR2(O for filtering Power Control ptional) the uplink GBFD-110703 Algorithm Maximum permissibl e adjustment step when the BSC decreases SET the uplink HUAWEI III GCELLPWR3(O transmit Power Control ptional) power GBFD-117601 Algorithm Maximum permissibl e adjustment step when the BSC increases SET the uplink HUAWEI III GCELLPWR3(O transmit Power Control ptional) power GBFD-117601 Algorithm
ULMAXDOW NSTEP ULMAXDownStep BSC6900
ULMAXUPST EP ULMAXUpStep
BSC6900
2G Cell UL UlOlcThrd2G Overload Cell Congest Thred
BSC6900
ULPREDLEN UL MR. Number D Predicted
BSC6900
When the uplink load of a cell is greater than the value, the uplink of the cell is SET in the GSM and GCELLHOINTE overload UMTS Load RRATLDB(Optio congestion Balancing nal) status. GBFD-511103 Based on Iur-g After the BSC delivers the power control command, it should wait for a certain period before affirming the effect of the power control. Therefore, the MR that power control decision is based on cannot accurately reflect the radio environme nt during the power adjustment , but SET misses the Enhanced GCELLPWR2(O latest Power Control ptional) changes of GBFD-110703 Algorithm
ULQHIGHTH UL Qual. Upper RED Threshold
BSC6900
The MS transmit power is decreased only when the quality level of the MS transmit signal is smaller than the value of the parameter. If (the uplink receive level MAX Up Adj. PC Value by Qual) is smaller than "UL RX_LEV Lower Threshold" , the MS transmit SET power is Enhanced GCELLPWRBA not Power Control SIC(Optional) adjusted. GBFD-110703 Algorithm
ULQLOWTH UL Qual. Lower RED Threshold
BSC6900
The MS transmit power is increased only when the quality level of the MS transmit signal is greater than the value of the parameter. If (the uplink receive level + MAX Up Adj. PC Value by Qual) is greater than "UL RX_LEV Upper Threshold" , the MS transmit SET power is Enhanced GCELLPWRBA not Power Control SIC(Optional) adjusted. GBFD-110703 Algorithm
ULQUAFILTL Filter Length for EN UL Qual.
BSC6900
When the network receives measurem ent reports, the measurem ent values in several straight measurem ent reports are filtered to reflect the radio operating environme nt for the sake of accuracy. This parameter specifies the number of measurem ent reports sampled for filtering SET the uplink Enhanced GCELLPWR2(O signal Power Control ptional) quality. GBFD-110703 Algorithm
ULQUALBAD UL Qual. Bad Trig TRIG Threshold BSC6900
In the case of power control, when the uplink receive quality is not smaller than "UL Qual. Bad Trig Threshold" , the actual "UL RX_LEV Upper Threshold" is increased by "UL SET Qual. Bad Enhanced GCELLPWR2(O UpLEVDiff Power Control ptional) ". GBFD-110703 Algorithm In the case of power control, when the uplink receive quality is not smaller than "UL Qual. Bad Trig Threshold" , the actual "UL RX_LEV Upper Threshold" is increased by "UL SET Qual. Bad Enhanced GCELLPWR2(O UpLEVDiff Power Control ptional) ". GBFD-110703 Algorithm
ULQUALBAD UL Qual. Bad UPLEV UpLEVDiff
BSC6900
UL Qual. ULQUALIMIT Threshold
BSC6900
An emergency handover due to bad quality is triggered when the uplink receive quality is not smaller than "UL HUAWEI I SET Qual. Handover GCELLHOEMG( Threshold" GBFD-110601 HUAWEI II Optional) . GBFD-510501 Handover The value of this parameter correspond s to multiplying quality level 0 to 7 by 10. An emergency handover can be triggered only when the uplink receive quality of the MS is greater AMR FR than the HUAWEI II SET value of GBFD-115501 Handover GCELLAMRQU this GBFD-510501 HUAWEI I L(Optional) parameter. GBFD-110601 Handover
ULQUALIMIT UL Qual. Limit for AMRFR AMR FR BSC6900
ULQUALIMIT UL Qual. Limit for AMRHR AMR HR BSC6900
The value of this parameter correspond s to multiplying quality level 0 to 7 by 10. An emergency handover can be triggered only when the uplink receive quality of the MS is greater AMR HR than the HUAWEI II SET value of GBFD-115502 Handover GCELLAMRQU this GBFD-510501 HUAWEI I L(Optional) parameter. GBFD-110601 Handover
ULREXLEVA ULRexLevAdjust DJFCTR Factor BSC6900
This parameter specifies the uplink signal strength factor multiplied by 10 during the calculation of the uplink power control step. The uplink signal strength factor is a coefficient indicating how much the signal strength is considered during the calculation of the uplink SET power HUAWEI III GCELLPWR3(O control Power Control ptional) step. GBFD-117601 Algorithm
ULREXLEVE ULRexLevExpon XPFLTLEN entFilterLen BSC6900
When the network receives measurem ent reports, the measurem ent values in several straight measurem ent reports are filtered to reflect the radio operating environme nt for the sake of accuracy. This parameter specifies the number of measurem ent reports sampled for exponent filtering of SET the uplink HUAWEI III GCELLPWR3(O signal Power Control ptional) strength. GBFD-117601 Algorithm When the uplink receive level reaches the threshold, Huawei III SET power HUAWEI III GCELLPWR3(O control is Power Control ptional) performed. GBFD-117601 Algorithm
ULREXLEVH ULRexLevHighTh IGHTHRED red BSC6900
ULREXLEVL ULRexLevLowThr OWTHRED ed BSC6900
ULREXLEVS ULRexLevSlideW LDWINDOW indow BSC6900
When the uplink receive level is lower than the threshold, Huawei III SET power HUAWEI III GCELLPWR3(O control is Power Control ptional) performed. GBFD-117601 Algorithm When the network receives measurem ent reports, the measurem ent values in several straight measurem ent reports are filtered to reflect the radio operating environme nt for the sake of accuracy. This parameter specifies the number of measurem ent reports sampled for slidewindow filtering of SET the uplink HUAWEI III GCELLPWR3(O signal Power Control ptional) strength. GBFD-117601 Algorithm
ULREXQUAL ULRexQualAdjust ADJFCTR Factor BSC6900
This parameter specifies the uplink quality level factor multiplied by 10 during the calculation of the uplink power control step. The uplink quality level factor is a coefficient indicating how much the quality level is considered during the calculation of the uplink SET power HUAWEI III GCELLPWR3(O control Power Control ptional) step. GBFD-117601 Algorithm
ULREXQUAL ULRexQualExpon EXPFLTLEN entFilterLen BSC6900
When the network receives measurem ent reports, the measurem ent values in several straight measurem ent reports are filtered to reflect the radio operating environme nt for the sake of accuracy. This parameter specifies the number of measurem ent reports sampled for exponent filtering of SET the uplink HUAWEI III GCELLPWR3(O signal Power Control ptional) quality. GBFD-117601 Algorithm
ULREXQUAL SLDWINDO ULRexQualSlide W Window
BSC6900
When the network receives measurem ent reports, the measurem ent values in several straight measurem ent reports are filtered to reflect the radio operating environme nt for the sake of accuracy. This parameter specifies the number of measurem ent reports sampled for slidewindow filtering of SET the uplink HUAWEI III GCELLPWR3(O signal Power Control ptional) quality. GBFD-117601 Algorithm
ULRXLEVPR OTECTFACT III UL RexLev OR Protect Factor
BSC6900
Signal strength factor for the protective limitation on calculating the uplink power control adjustment step. The calculated step value cannot exceed the step value that is obtained on the basis of the signal strength protection factor and the signal SET quality HUAWEI III GCELLPWR3(O protection Power Control ptional) factor. GBFD-117601 Algorithm
ULRXQUALP ROTECTFAC III UL RexQual TOR Protect Factor
BSC6900
Signal strength factor for the protective limitation on calculating the uplink power control adjustment step. The calculated step value cannot exceed the step value that is obtained on the basis of the signal strength protection factor and the signal SET quality HUAWEI III GCELLPWR3(O protection Power Control ptional) factor. GBFD-117601 Algorithm When the uplink receive level reaches the threshold, Huawei II SET power Enhanced GCELLPWRBA control is Power Control SIC(Optional) performed. GBFD-110703 Algorithm When the uplink receive level is below the threshold, Huawei II SET power Enhanced GCELLPWRBA control is Power Control SIC(Optional) performed. GBFD-110703 Algorithm
ULSSHIGHT UL RX_LEV HRED Upper Threshold BSC6900
ULSSLOWT UL RX_LEV HRED Lower Threshold BSC6900
ULTHF1
AMR UL Coding Rate adj.th1[F]
BSC6900
Based on the RQI in the call measurem ent report, the BTS and MS automatica lly adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carriertointerferenc e ratio (CIR) of the call. If SET RQI equals GCELLCCAMR( 1, the CIR GBFD-115501 AMR FR Optional) is 0.5 dB; if GBFD-115507 WB AMR
ULTHF2
BSC6900
ULTHF3
BSC6900
ULTHH1
AMR UL Coding Rate adj.th1[H]
BSC6900
ULTHH2
BSC6900
ULTHH3
BSC6900
ULTHWB1
AMR UL Coding Rate adj.th1[WB] BSC6900
Based on the RQI in the call measurem ent report, the BTS and MS automatica lly adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carriertointerferenc e ratio (CIR) of the call. If SET RQI equals GCELLCCAMR( 1, the CIR Optional) is 0.5 dB; if GBFD-115507 WB AMR
ULTHWB2
AMR UL Coding Rate adj.th2[WB] BSC6900
Based on the RQI in the call measurem ent report, the BTS and MS automatica lly adjust the current speech coding rate according to the related algorithm. The coding rate adjustment threshold is the threshold of RQI. The RQI indicates the carriertointerferenc e ratio (CIR) of the call. If SET RQI equals GCELLCCAMR( 1, the CIR Optional) is 0.5 dB; if GBFD-115507 WB AMR Whether a UL subcell to OL SET subcell GCELLHOIUO( handover Optional) is allowed GBFD-113201 Concentric Cell Number of uplink GRPS TBF RLC blocks sent before an SET acknowled BSCPSSOFTPA gement is RA(Optional) required GBFD-119105 RLC Mode
ULTOOLHO ALLOW
UL to OL HO Allowed
BSC6900
ulUlAckFreq
ACK Frequency for GPRS Uplink TBF
BSC6900
Um Interface UMCROSST Crosstalk ALKOPTALL Optimization OWED Allowed
BSC6900
Whether the crosstalk optimizatio n function over the Um interface is allowed. If this parameter is set to YES when call drops occur on the Um interface, this function can avoid crosstalk due to very early assignmen t of the channel that is not released. If this parameter is set to SET YES and GCELLSOFT(O the ptional) ongoing GBFD-111203 O&M of BSC Timer of penalty on a neighborin g cell when a handover fails due to faults of air HUAWEI I SET interface Handover GCELLHOFITP connection GBFD-110601 HUAWEI II EN(Optional) . GBFD-510501 Handover Phase tag for GSM protocols that the SET Um BSCBASIC(Opti interface Configuration onal) supports MRFD-210301 Management
UMPENALTY TIMER UmPenaltyTimer BSC6900
UmVer
Um Interface Tag BSC6900
UNBA
Support Balance
BSC6900
SET E1T1(Optional)
Whether to support the balanced mode or the unbalance d mode. When this parameter is set to YES, you can set the DIP switches on the interface boards. You do not need to set the DIP switches by turning them inwards or outwards. In this case, an interface board can be made to work in E1_UNBA, E1_BA, or T1 mode. None
None
UNBLOCKR ETRY Unblock Retry
BSC6900
Retry times after the peer response timer expires SET during BSCNSPARA(O NSVC ptional) unblocking GBFD-510002 Gb Over FR
ANT_A ALD UnderCurAlm Under Current ThdA Occur Threshold
BSC6900
Abnormally alarm triggering threshold when the ANT_A tributary antenna current is too light. When the actual current is lower than the configured value, the ALD Current Abnormally Alarm is Faulty triggered Management with the Connection correspond with TMA SET ing alarm (Tower BTSRXUBP(Opt tributary MRFD-210304 Mounted ional) No. of 1. MRFD-210601 Amplifier)
ANT_B ALD UnderCurAlm Under Current ThdB Occur Threshold
BSC6900
Abnormally alarm triggering threshold when the ANT_B tributary antenna current is too light. When the actual current is lower than the configured value, the ALD Current Abnormally Alarm is Faulty triggered Management with the Connection correspond with TMA SET ing alarm (Tower BTSRXUBP(Opt tributary MRFD-210304 Mounted ional) No. of 1. MRFD-210601 Amplifier)
RET ALD Under UnderCurAlm Current Occur ThdRET Threshold
BSC6900
Abnormally alarm triggering threshold when the RET tributary antenna current is too light. When the actual current is lower than the configured value, the ALD Current Abnormally Alarm is triggered with the correspond SET ing alarm BTSRXUBP(Opt tributary Faulty ional) No. of 1. MRFD-210304 Management
ANT_A ALD UnderCurClr Under Current ThdA Clear Threshold
BSC6900
Abnormally alarm clearance triggering threshold when the ANT_A tributary antenna current is too light. When the actual current is higher than the configured value, the ALD Current Abnormally Alarm Faulty disappears Management with the Connection correspond with TMA SET ing alarm (Tower BTSRXUBP(Opt tributary MRFD-210304 Mounted ional) No. of 1. MRFD-210601 Amplifier)
ANT_B ALD UnderCurClr Under Current ThdB Clear Threshold
BSC6900
Abnormally alarm clearance triggering threshold when the ANT_B tributary antenna current is too light. When the actual current is higher than the configured value, the ALD Current Abnormally Alarm Faulty disappears Management with the Connection correspond with TMA SET ing alarm (Tower BTSRXUBP(Opt tributary MRFD-210304 Mounted ional) No. of 1. MRFD-210601 Amplifier)
RET ALD Under UnderCurClr Current Clear ThdRET Threshold
BSC6900
Abnormally alarm clearance triggering threshold when the RET tributary antenna current is too light. When the actual current is higher than the configured value, the ALD Current Abnormally Alarm disappears with the correspond SET ing alarm BTSRXUBP(Opt tributary Faulty ional) No. of 1. MRFD-210304 Management Index of upper-level ADD BTS BTSAUTOPLAN connected (Mandatory) to the BTS GBFD-111202 O&M of BTS Number of the upperlevel BTS. The ADD number is BTSCONNECT( unique in a Mandatory) BSC6900. GBFD-111202 O&M of BTS Index type of upperADD level BTS BTSAUTOPLAN connected (Mandatory) to the BTS GBFD-111202 O&M of BTS Index type ADD of the BTSCONNECT( upper-level Mandatory) BTS GBFD-111202 O&M of BTS
UPBTSID
Up BTS Index
BSC6900
UPBTSID
Dest Father BTS Index BSC6900
UPBTSIDTY UPBTS Index PE type
BSC6900
UPBTSIDTY Dest Father Index PE Type BSC6900
UPBTSNAM E Up BTS Name
BSC6900
Name of the upperlevel BTS connected to the BTS. The BTS name is unique within a same BSC6900. This parameter cannot contain , ; = " ' more than two (include two) %, more than two (include two) space, more than ADD three BTSAUTOPLAN (include (Mandatory) three) +. GBFD-111202 O&M of BTS Name of the upperlevel BTS. The name is unique in a BSC6900. The invalid characters (\, /, :, *, ?, ", <, >, |, and #) ADD cannot BTSCONNECT( appear in Mandatory) the name. GBFD-111202 O&M of BTS
UPBTSNAM Dest Father BTS E Name BSC6900
UPDATE
Update
BSC6900
Update code for a simple cell broadcast message. This parameter together with "Code" uniquely identifies a ADD cell GSMSCB(Mand broadcast Simplified Cell atory) message. GBFD-113602 Broadcast
UPDEFAULT Uplink Default CS CS Type BSC6900
Default coding scheme of the uplink GPRS link. If the uplink adopts the dynamic adjustment coding scheme, this parameter can be used to set the coding scheme for transmissi on during initial access. If the uplink uses the fixed coding scheme, the TBF uses the SET fixed GCELLPSCS(O coding ptional) scheme.
UPDEFAULT Uplink Default MCS MCS Type
BSC6900
Default coding scheme of the uplink EDGE link. If the uplink adopts the dynamic adjustment coding scheme, this parameter can be used to set the coding scheme for transmissi on during initial access. If the uplink uses the fixed coding scheme, the TBF uses the SET fixed GCELLEGPRSP coding ARA(Optional) scheme.
Uplink Multiplex Threshold of UPDYNCHN Dynamic Channel TRANLEV Conversion BSC6900
Uplink multiplex threshold of dynamic channel conversion . When the subscriber number on the channel reaches the value (threshold/ 10), the dynamic channel conversion application is triggered. We recomman d that the value of "Uplink Multiplex Threshold of Dynamic Channel Conversio SET n" should GCELLPSCHM( be less Optional) than
Uplink EGPRS2UPE2ADEFA A Default MCS ULTMCS Type BSC6900
Default coding scheme used on the uplink EGPRS2A link. If the uplink uses the dynamic coding scheme, this parameter specifies the coding scheme that is used for the transmissi on in initial access. If the uplink uses the fixed coding scheme, the TBF uses the SET fixed GCELLEGPRSP coding Uplink ARA(Optional) scheme. GBFD-510803 EGPRS2-A
Uplink EGPRS2UPE2AFIXM A Fixed MCS CS Type BSC6900
Fixed coding scheme that is used on the uplink EGPRS2A link. If the uplink uses the fixed coding scheme, this parameter can be set to any one in MCS1-6 and UAS711. If the uplink uses the dynamic coding scheme, this parameter SET can be set GCELLEGPRSP to Uplink ARA(Optional) UNFIXED. GBFD-510803 EGPRS2-A
Inactive Period of UPEXTTBFI Extended Uplink NACTDELAY TBF BSC6900
Inactive period of extended uplink TBF. After the network side receives the last uplink RLC data block (CountValu e=0) of the MS supporting the extended uplink TBF, the uplink TBF is not released immediatel y. Instead, the uplink TBF is set to the inactive state. In SET the GCELLPRIVAT inactive EOPTPARA(Opt period, if Extended ional) the MS GBFD-119203 Uplink TBF
UPFIXCS
Uplink Fixed CS Type
BSC6900
Adjustment mode of the uplink GPRS link coding scheme. If the fixed coding scheme is used, this parameter is a value ranging from CS1 to CS4. If the dynamic coding scheme is used, this SET parameter GCELLPSCS(O is set to ptional) UNFIXED. Coding scheme of the uplink EDGE link. If the uplink uses the fixed coding scheme, this parameter is set to a value ranging from MCS1 to MCS9. If the uplink uses the dynamic adjustment coding scheme, this SET parameter GCELLEGPRSP is set to ARA(Optional) UNFIXED.
UPFIXMCS
Uplink Fixed MCS Type BSC6900
UPINTERFQ Interf.of UL Qual. UALLIMIT Threshold BSC6900
One of the thresholds to determine whether the uplink interferenc e exists. If the uplink level is not smaller than "Interf.of UL Level Threshold" and the uplink quality of the channel is not less than "Interf.of UL Qual. Threshold" HUAWEI I SET , the uplink Handover GCELLCHMGA interferenc GBFD-110601 HUAWEI II D(Optional) e exists. GBFD-510501 Handover
UPINTERLE Interf.of UL Level VLIMIT Threshold BSC6900
One of the thresholds to determine whether the uplink interferenc e exists. If the uplink level is not smaller than "Interf.of UL Level Threshold" and the uplink quality of the channel is not less than "Interf.of UL Qual. Threshold" HUAWEI I SET , the uplink Handover GCELLCHMGA interferenc GBFD-110601 HUAWEI II D(Optional) e exists. GBFD-510501 Handover
UPLNKMAXL Uplink Max ENGTH Length
BSC6900
Maximum time in which a user uses the uplink of its VGCS call continuous ly when the SET BTS works Group Call BTSFALLBACK( in fallback Reliability Optional) mode GBFD-510309 Enhancing Size of the OML/ESL/ EML SET Uplink BTSLAPDWS(O LAPD ptional) Window GBFD-118601 Abis over IP
UPOMLWS
OML/ESL/EML LAPD Uplink Window Size
BSC6900
UPPCEN
UL PC Allowed
BSC6900
Enhanced Power Control Whether to Algorithm SET allow MS HUAWEI III GCELLBASICP power GBFD-110703 Power Control ARA(Optional) control GBFD-117601 Algorithm Upper class transport resource group No. It is valid only when " Is First Class Transport ADD Resource RSCGRP(Mand Group " is atory) set to NO. GBFD-118605 IP QOS Upper ADD number of IPLOGICPORT( the logical Optional) port None
Upper Class Transport UPPERGRPI Resource Group D No.
BSC6900
UPPERLP
The Upper logic port number
BSC6900
None
Duration of Uplink UPRXLEVLA Received Level STTIME Differ BSC6900
If the difference between uplink receive levels of calls within the same timeslot is greater than "Offset of the difference between uplink received levels" for P seconds among N seconds, the call with weak uplink receive level within the timeslot will be handed over to HUAWEI I SET another Handover GCELLCHMGA timeslot. GBFD-110601 HUAWEI II D(Optional) This GBFD-510501 Handover
UPRXLEVS Smooth Factor of MOOTHPAR Uplink Received A Level BSC6900
After the existing uplink receive level, uplink receive level after the previous optimizatio n, and the value of this parameter are weightaveraged, the uplink receive level after the optimizatio n at this time is obtained and used for determing the difference between HUAWEI I SET the uplink Handover GCELLCHMGA receive GBFD-110601 HUAWEI II D(Optional) levels. GBFD-510501 Handover
Observe Time of UPRXLEVST UL RX Level ATICTIME Difference BSC6900
If the difference between uplink receive levels of calls within the same timeslot is greater than "Offset of the difference between uplink received levels" for P seconds among N seconds, the call with weak uplink receive level within the timeslot will be handed over to HUAWEI I SET another Handover GCELLCHMGA timeslot. GBFD-110601 HUAWEI II D(Optional) This GBFD-510501 Handover
UPSENDSM Short Message DIS Uplink Disabled
BSC6900
This parameter specifies whether the transmissi on of pointto-point short messages is disabled. If necessary, the transmissi on of the uplink short messages in a specific cell can be disabled so that sufficient radio channels can be SET seized by GCELLCCAD(O normal ptional) calls. GBFD-110203
Release Delay of UPTBFRELD Non-extended ELAY Uplink TBF BSC6900
Delay of releasing the nonextended uplink TBF. After receiving the last uplink RLC data block (CountValu e=0), the network side sends the message Packet Uplink Ack/Nack with FAI=1 to notify the MS of releasing the uplink TBF. After this parameter is set, the network side SET notifies the GCELLPRIVAT MS of EOPTPARA(Opt releasing Extended ional) this TBF GBFD-119203 Uplink TBF
Uplink TBF UPTHDCSD Threshold from EGRADE1 CS2 to CS1
BSC6900
Retransmi ssion threshold when the coding mode of the uplink TBF is changed from CS2 to CS1. When the retransmis sion rate of the uplink TBF is greater than or equal to this threshold, the coding mode of the uplink TBF is SET changed GCELLPSCS(O from CS2 Coding ptional) to CS1. GBFD-119106 Scheme
BSC6900
Retransmi ssion threshold when the coding mode of the uplink TBF is changed from CS3 to CS2. When the retransmis sion rate of the uplink TBF is greater than or equal to this threshold, the coding mode of the uplink TBF is SET changed GCELLPSCS(O from CS3 ptional) to CS2.
BSC6900
Retransmi ssion threshold when the coding mode of the uplink TBF is changed from CS4 to CS3. When the retransmis sion rate of the uplink TBF is greater than or equal to this threshold, the coding mode of the uplink TBF is SET changed GCELLPSCS(O from CS4 ptional) to CS3.
Uplink TBF UPTHDCSU Threshold from PGRADE1 CS1 to CS2
BSC6900
Retransmi ssion threshold when the coding mode of the uplink TBF is changed from CS1 to CS2. When the retransmis sion rate of the uplink TBF is less than or equal to this threshold, the coding mode of the uplink TBF is SET changed GCELLPSCS(O from CS1 Coding ptional) to CS2. GBFD-119106 Scheme
BSC6900
Retransmi ssion threshold when the coding mode of the uplink TBF is changed from CS2 to CS3. When the retransmis sion rate of the uplink TBF is less than or equal to this threshold, the coding mode of the uplink TBF is SET changed GCELLPSCS(O from CS2 ptional) to CS3.
BSC6900
Retransmi ssion threshold when the coding mode of the uplink TBF is changed from CS3 to CS4. When the retransmis sion rate of the uplink TBF is less than or equal to this threshold, the coding mode of the uplink TBF is SET changed GCELLPSCS(O from CS3 ptional) to CS4.
Cell Urgent URGENTRE Reselection SELALLOW Allowed
BSC6900
Whether to allow cell urgent reselection . If this parameter is set to PERMIT and [NC2 Load Reselectio n Switch is set to Support, the load of the target cell is involved in the algorithm for NC2 SET cell GCELLNC2PAR reselection A(Optional) . GBFD-116201
USERIDTYP E User Query Type BSC6900
CHK INNSPCH(Mand atory) STR CALLRESLOP( Mandatory) ADD GCSCHRUSER( Mandatory)
Mode of querying the information on an MS GBFD-111203 O&M of BSC
Support USF USFGRAN4B Granularity 4 LK Switch
BSC6900
Whether to support SET USF BSCPSSOFTPA granularity RA(Optional) 4 GBFD-114101 GPRS DLD LICENSE(Mand atory) ULD User name O&M of BSC LICENSE(Mand of the FTP GBFD-111203 License atory) server MRFD-210403 Management DLD RETANTCFG(M andatory) ULD BTSDEVFILE(M andatory) DLD BTSPATCH(Ma ndatory) ULD BTSLOG(Manda tory) DLD BTSSW(Mandat ory)
USR
User Name of FTP Server
BSC6900
USR
FTPServer User
BSC6900
User name for the FTP server. When the FTPServer .exe file downloade d through the LMT is installed, the user name is admin. GBFD-111202 O&M of BTS Start time when the TRX energy saving function is enabled for the BTS3002E . GBFD-111202 O&M of BTS
Energy Saving USTBGNTIM Start E Time[HH:MM]
BSC6900
SET BTSDOMUBP( Mandatory)
Energy Saving USTENDTIM End E Time[HH:MM]
BSC6900
UTEMTHD
Upper Temperature Threshold
BSC6900
End time when the TRX energy saving function is enabled for SET the BTSDOMUBP( BTS3002E Mandatory) . GBFD-111202 O&M of BTS Upper temperatur e threshold for the environme nt alarm box to report an alarm indicating that the ambient temperatur e is too high. If the ambient temperatur e of the BTS is higher than this threshold, the environme nt alarm box reports the alarm. In multimode scenario, the value SET of this BTSEXD(Option parameter al) in this GBFD-111202 O&M of BTS
UTOOFAILM MaxRetry Time AXTIME after UtoO Fail
BSC6900
UTOOHOPE Penalty Time of NTIME UtoO HO
BSC6900
When a UL subcell-OL subcel handover decision is performed to a call, the BSC determines whether the number of handover failures reaches the "MaxRetry Time after UtoO Fail". If the number reaches the threshold, the UL subcell to OL subcell handover is prohibited. Otherwise, SET the UL GCELLHOIUO( subcell to Optional) OL subcell GBFD-113201 Concentric Cell After an MS performs a OL subcell to UL subcell handover successfull y, the MS cannot be handed over to the OL subcell again within the SET value of GCELLHOIUO( the Optional) parameter. GBFD-113201 Concentric Cell
UtoO HO UTOORECT Received Level H Threshold
BSC6900
One of the parameters that determine the coverage of the OL subcell and of the UL subcell. "UtoO HO Received Level Threshold" , "OtoU HO Received Level Threshold" , "ReceiveQ ualThrshA MRFR", "TA Threshold" , and "TA Hysteresis" determine the coverage of the OL SET subcell GCELLHOIUO( and UL Optional) subcell. GBFD-113201 Concentric Cell
UTOOTRAF UtoO Traffic HO HOALLOW Allowed
BSC6900
When this parameter is set to YES, the existing call is performed in the OL subcell, and "OL to UL HO Allowed" is set to YES, an OL subcell to UL subcell handover is triggered if the traffic volume in the UL subcell is smaller than "En Iuo Out Cell Low Load Thred". If the existing call is SET performed GCELLHOIUO( in the UL Optional) subcell, a GBFD-113201 Concentric Cell
UTRAFHOP ERIOD
Underlay HO Step Period
BSC6900
UTRAFHOST Underlay HO EP Step Level
BSC6900
Hierarchic al handover period of the load handover from the UL subcell to the OL subcell. If the channel seizure ratio of the UL subcell is greater than the UL subcell general overload threshold, all the calls in the cell send handover requests at the same time and the load on the BSC increases SET in a short GCELLHOIUO( time. Thus, Optional) congestion GBFD-113201 Concentric Cell Hierarchic al level step of the load handover from the SET UL subcell GCELLHOIUO( to the OL Optional) subcell GBFD-113201 Concentric Cell
UTRANCELL TYPE Utran Cell Type
BSC6900
This parameter specifies the type of a 3G cell. A cell type can be Frequency Division Duplex (FDD) or GSM/WCDMA Time Interoperability ADD Division GSM/TDGEXT3GCELL( Duplex GBFD-114301 SCDMA Mandatory) (TDD). GBFD-114302 Interoperability Vendor ADD code of the BTSRETANT(M RET andatory) antenna GBFD-111202 O&M of BTS This parameter is used to limit the maximum number of channels that can be used by the VGCS in a cell. This prevents too many channels in the cell from being occupied by the VGCS and thus prevents public network services from being affected. When this parameter Public Voice is set to Group Call 255, the Service SET maximum Public Voice GCELLGSMR(O number is GBFD-510301 Broadcast ptional) not limited. GBFD-510302 Service
VENDORCO DE Vendor Code
BSC6900
Maximum Number of VGCSMAXN Channels for UM VGCS
BSC6900
Channel Allocation VGCSPREE Strategy for MPT VGCS
BSC6900
This parameter specifies whether the preemption of channels between public network services and the VGCS is Public Voice allowed Group Call when Service SET preemption Public Voice GCELLGSMR(O conditions GBFD-510301 Broadcast ptional) are met. GBFD-510302 Service This parameter is used to reserve a certain number of channels in a cell for the Voice Group Call Service (VGCS) to use directly. The specified channels Public Voice are Group Call unavailabl Service SET e to public Public Voice GCELLGSMR(O network GBFD-510301 Broadcast ptional) services. GBFD-510302 Service
Reserved Number of VGCSRSRV Channels for NUM VGCS
BSC6900
VIPACCESS VIP Access CPU CPURATE Rate BSC6900
This parameter specifies the usage threshold of the CPU for VIP user calls that can be admitted. When the usage of a CPU is greater than this threshold, the new service requests from VIP users are transferred to another CPU for processing . When the usage of all CPUs is greater than this threshold, SET all new BSCFCPARA(O service GSM Flow ptional) requests GBFD-111705 Control Is VIP Cell.The parameter is used for ADD BSC6900 GCELL(Optional flow GSM Flow ) control. GBFD-111705 Control
VIPCELL
VIP Cell
BSC6900
VIPPRIORIT Y VIP Priority
BSC6900
This parameter specifies the eMLPP priority value correspond ing to the VIP call. When the eMLPP(En hanced Multi-Level Precedenc e and Preemption service) priority value of a user is greater than or equal to the value of this SET parameter, BSCFCPARA(O the user is GSM Flow ptional) a VIP user. GBFD-111705 Control
VIPSHAREIN VIP Share in CPU CPURATE Rate BSC6900
This parameter specifies the usage threshold of the CPU for VIP user calls that are transferred from other CPUs. When the usage of a CPU is greater than this threshold, the VIP service requests transferred from other SET CPUs are BSCFCPARA(O directly GSM Flow ptional) discarded. GBFD-111705 Control If the parameter is set to Disable, the added IP path is not configured with the VLAN ID. If the parameter is set to Enable, the added IP path is ADD configured IPPATH(Optiona with the l) VLAN ID. GBFD-118605 IP QOS SET BSCABISPRIM AP(Optional) Specified Vlan enabling flag
VLANFlAG
VLANID Flag
BSC6900
VLANFLAG
Vlan Flag
BSC6900
None
None
VLANID Flag of First Local IP VLANFLAG1 address
BSC6900
VLANID ADD flag of first SCTPLNK(Optio local IP nal) address None
None
VLANFlAG2
VLANID Flag of Second Local IP address
BSC6900
VLANID Flag of ADD second SCTPLNK(Optio Local IP nal) address
None
None
VLANID
VLAN ID.
BSC6900
ADD IPPATH(Mandat ory) ADD VLANID(Mandat ory)
VLANID of the IP address of Abis IP over the E1/T1 specified GBFD-118611 A IP over next hop GBFD-118622 E1/T1
VLANID
VLAN ID
BSC6900
ADD VLAN of ETHMA(Mandat the MA in ory) the MD
VLANID
VLAN ID
BSC6900
SET BTSVLAN(Optio nal) IMP VLAN ID of BTSVLAN(Optio the service nal) type GBFD-118601 Abis over IP VLAN to which the maintenan ce association belongs in ADD the Ethernet OAM BTSETHMA(Ma maintenan GBFD-118630 Configuration ndatory) ce domain. MRFD-210301 Management
VLANID
VLAN ID
BSC6900
VLANID1
VLAN ID of First Local IP address BSC6900
ADD VLAN ID of SCTPLNK(Mand first Local atory) IP address None
None
VLANID2
VLAN ID of Second Local IP address
BSC6900
VLAN ID of ADD second SCTPLNK(Mand Local IP atory) address None
None
VLANPRI
VLAN Priority
BSC6900
SET DSCPMAP(Opti VLAN onal) priority
None
None
VLANPRI
VLAN Priority
BSC6900
VLAN priority level of the service type. This parameter helps to determine the packet service priority level at the data link layer on the Ethernet. If this parameter is set to 0, the service type has the highest VLAN priority level. If this parameter is set to 7, SET the service BTSVLAN(Optio type has nal) the lowest IMP VLAN BTSVLAN(Optio priority nal) level. GBFD-118601 Abis over IP SET BTSVLAN(Optio nal) IMP BTSVLAN(Optio nal)
VLANSWITC H VLAN Switch
BSC6900
VLAN switch for the service type GBFD-118601 Abis over IP
VOICEVER
Speech Version
BSC6900
Speech version supported Configuration by a cell MRFD-210301 Management
Enable Alarm VOL24_MAS Reporting for 24V K Power BSC6900
ADD EMU(Optional)
24V voltage alarm switch
Upper Limit of VOL24_THD Alarm for 24V _HIGH Power
BSC6900
ADD EMU(Optional)
Upper limit for triggering a 24 V voltage sensor Faulty alarm MRFD-210304 Management Lower limit for triggering a 24 V voltage sensor Faulty alarm MRFD-210304 Management 48V voltage alarm switch
Lower Limit of VOL24_THD Alarm for 24V _LOW Power
BSC6900
ADD EMU(Optional)
Enable Alarm VOL48_MAS Reporting for 48V K Power BSC6900
ADD EMU(Optional)
Upper Limit of VOL48_THD Alarm for 48V _HIGH Power
BSC6900
ADD EMU(Optional)
Upper limit for triggering a 48V voltage sensor Faulty alarm MRFD-210304 Management Lower limit for triggering a 48V voltage sensor Faulty alarm MRFD-210304 Management Whether to
Lower Limit of VOL48_THD Alarm for 48V _LOW Power
BSC6900
ADD EMU(Optional)
Standing Wave VSWRENAB Alarm CFG LED Enabled
BSC6900
enable the standing wave alarm SET parameters BTSDFCUBP(O to be Faulty ptional) configured MRFD-210304 Management
VSWR TRX VSWRERRT Unadjusted HRES Threshold
BSC6900
This parameter specifies a condition for generating a BTS alarm. This parameter together with "VSWR TRX error threshold" is used to detect whether the antenna system SET connected GCELLOTHEXT to the TRX (Optional) is faulty. GBFD-111202 O&M of BTS SET BTSDFCUBP(O ptional) SET BTSDDPUBP(O ptional) Filtering times of serious standing wave Faulty alarms MRFD-210304 Management Standing wave alarm threshold. When the VSWR is greater than the value of this SET parameter, BTSDFCUBP(O the TRX ptional) reports a SET standing BTSDDPUBP(O wave Faulty ptional) alarm. MRFD-210304 Management
VSWRFILET Serious VSW ERCOUNTE Alarm Filter R Times
BSC6900
Standing Wave VSWRTHRE Radio Alarm S1 Threshold
BSC6900
VSWRTHRE Serious VSW S2 Alarm Threshold
BSC6900
Serious standing wave alarm threshold. When the VSWR is greater than the value of this parameter, SET the TRX BTSDFCUBP(O reports a ptional) serious SET standing BTSDDPUBP(O wave Faulty ptional) alarm. MRFD-210304 Management This parameter specifies a condition for generating a BTS alarm. This parameter together with "VSWR TRX unadjusted threshold" are used to check whether the antenna system connecting to the TRX is faulty. If the value of this parameter SET is smaller, GCELLOTHEXT the error is (Optional) smaller. GBFD-111202 O&M of BTS SET BTSAUTODLDA CTINFO(Mandat ory) V-version number of the BTS software GBFD-111202 O&M of BTS
VSWRUNJU VSWR TRX Error STTHRES Threshold BSC6900
VVer
V-Version No.
BSC6900
WAITFORRE LIND T3109
BSC6900
Wait for REL WAITFORRE Indication AMR LINDAMRFR FR
BSC6900
This timer is used to set the time of waiting for a ReleaseIn dication message after a ChannelRe lease message is sent. If the timer expires, the SET channel is GCELLTMR(Opt deactivate ional) d. GBFD-110501 Call Control When the BSC6900 sends a ChannelRe lease message and the current call uses the AMRFR encoding mode, the timer T3109 (AMRFR) is started. If the BSC6900 receives the ReleaseIn dication message before the T3109 (AMRFR) timer expires, the timer T3109 (AMRFR) SET is stopped. GCELLTMR(Opt If the timer ional) T3109 GBFD-115501 AMR FR
WAITFORRE T3109 for AMR LINDAMRHR HR
BSC6900
When the BSC sends a ChannelRe lease message and the current call uses the AMRHR encoding mode, the timer T3109 (AMRHR) is started. If the BSC receives the ReleaseIn dication message before the T3109 (AMRHR) timer expires, the timer T3109 (AMRHR) is stopped. SET If the timer GCELLTMR(Opt T3109 ional) (AMRHR) GBFD-115502 AMR HR
Timer of MS Location WaitMSLocat Response from ionResponse MS
BSC6900
Timer of waiting for the MS's response to the location measurem ent request sent from the BSC. If the BSC does not receive the measurem ent information reported by the MS before the timer expires, then the ADD MS GEXTSMLC(Opt location ional) fails. None
None
WAITRESVC Timer of HANREFRE Reserved TCH SHTIMER for EMC
BSC6900
The TCHs reserved for the emergency call are assigned to the user during the service assignmen t. If the TCHs are not assigned to the emergency call within a period, the TCHs Emergency are Call Service released (TS12) SET from the Guaranteed GCELLTMR(Opt reservation GBFD-110202 Emergency ional) queue. GBFD-110521 Call
IBCA Wait WAITSDCCH SDCCH Idle IDLETIMER Timer
BSC6900
When the dynamic PDCH needs to use MAIO of the SDCCH, the SDCCH is not allowed to be assigned to new calls within the value of the parameter. After the timer expires, check whether the SDCCH is idle. If the SDCCH is idle, MAIO of the SDCCH is allowed to be SET preempted. GCELLCHMGA If the D(Optional) channel is GBFD-117002
Timer of MS WaitSMLCLo Location cationRespon Response from se SMLC
BSC6900
Timer of waiting for the SMLC's response to the MS location request sent from the MSC. If the SMLC does not send any response to the MS location request before the timer expires, then the MS location fails. In this case, the BSC sends a Perform Location Abort message to the ADD SMLC for GEXTSMLC(Opt stopping ional) the MS None
None
WARMSET
Heating Equipment
BSC6900
Whether to start the heating equipment of the BTS. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSOUTPUT(O in another ptional) mode. GBFD-111202 O&M of BTS Water sensor alarm switch
WATER_MA Enable Water SK Alarm Reporting
BSC6900
ADD EMU(Optional)
WEEK
Week Limit
BSC6900
ADD OP(Optional)
Whether to limit the operation weekday of the operator. If the weekday needs to be limited, see the O&M of BSC description GBFD-111203 Security of "Week". MRFD-210305 Management
WELONGI
WE Longitude
BSC6900
This parameter is used to BSS-Based select the LCS (Cell ID + location of TA) SET a cell, east SoftGCELLLCS(Opti or west GBFD-115402 Synchronized onal) longitude. GBFD-118201 Network
WETSET
Humidification Equipment
BSC6900
Whether to start the humidificati on equipment of the BTS. In multimode scenario, the value of this parameter in one mode must be the same as the value of the correspond ing SET parameter BTSOUTPUT(O in another ptional) mode. GBFD-111202 O&M of BTS
WHETHERA FFECTSWA Whether affect P the port swapping BSC6900
Whether to trigger an active/stan dby port switchover. If this parameter is set to YES, an active/stan dby port switchover is triggered when a fault is detected on the active port. If this parameter is set to NO, an active/stan dby port switchover is not triggered when a fault is detected IP Fault STR on the Detection IPCHK(Optional) active port. GBFD-118609 Based on BFD
WINADJSWI LAPD Window TCH Adjust Switch
BSC6900
Whether to start the dynamic adjustment of the LAPD window. If this parameter is set to ALLOW, the LAPD transmit and receive window is enlarged when the delay is increased, which improves the transmissi on efficiency of LAPD but consuming more buffer resources in the memory of GBFD-118601 Abis over IP
WK
Week
BSC6900
ADD OP(Mandatory)
You can select O&M of BSC multiple GBFD-111203 Security weekdays. MRFD-210305 Management
WKMODE
Work mode
BSC6900
Working mode of the M3UA link set, including M3UA_AS P and M3UA_IPS P. For details about the ASP and ADD IPSP, see M3LKS(Optional the ) RFC4666. GBFD-118602 A over IP Time when the BTS stops checking for a radio link alarm. If this time is up, the BTS stops checking for or reporting a radio link alarm until the next alarm SET detection GTRXRLALM(O start time ptional) is up. GBFD-111202 O&M of BTS
WLAETIME
End Time of WLA Detection BSC6900
WLAFLAG
Wireless Link Alarm Critical Permit
BSC6900
Whether to enable the BTS to report a major radio link alarm. If this parameter is set to YES, the BTS reports a major radio link alarm when a radio link warning is not cleared within "WLARP". If this parameter is set to NO, the BTS does not report SET any major GTRXRLALM(O radio link ptional) alarm. GBFD-111202 O&M of BTS
WLARP
WLA Prompting Recover Period
BSC6900
Period for clearing a radio link warning. If a radio link warning is cleared within this period, the BTS reports the recovery alarm for the warning. If a radio link warning is not cleared within this period, the BTS determines whether to report a major radio link alarm according SET to GTRXRLALM(O "WLAFLA ptional) G". GBFD-111202 O&M of BTS Time when the BTS starts to check for a radio link alarm. If this time is up, the BTS starts to check for and SET report a GTRXRLALM(O radio link ptional) alarm. GBFD-111202 O&M of BTS
WLASTIME
Begin Time of WLA Detection
BSC6900
WLNKALMFL Wireless Link AG Alarm Flag
BSC6900
Whether to enable the BSC to deliver radio link alarm parameters to the BTS. If this parameter is set to YES, the BSC delivers the radio link alarm parameters to the BTS. If this parameter is set to NO, the BSC does not deliver the radio SET link alarm GTRXRLALM(M parameters andatory) to the BTS. GBFD-111202 O&M of BTS Flag of the work area FMT to be Configuration DATA(Optional) formatted MRFD-210301 Management Working mode of the RXU board Work mode of subrack
WORKAREA Work Area Flag
BSC6900
WORKINGS Working TANDARD Standard WORKMOD E
BSC6900
Work Mode
BSC6900
SET BTSRXUBP(Opt ional) ADD SUBRACK(Man datory)
GBFD-111202 O&M of BTS Configuration MRFD-210301 Management
WORKMOD E
Work Mode
BSC6900
SET E1T1(Optional)
Working mode. E1: The E1 system is recommen ded by the IUT-T. E1 carries signals at 2.048 Mbit/s. G.703 defines the electrical specificatio n and G.704 defines the frame format for E1 telecommu nication lines. The E1 system is used in Europe and China. T1: The T1 system is recommen ded by the ANSI and widely None
None
WORKMOD E
Work Mode
BSC6900
ADD BTS(Optional) ADD ATERSL(Option al) ADD ATERCONSL(O ptional)
BTS port working mode. This parameter must be consistent with that of the peer. Work mode of a BTS. A BTS can work in the following modes: E1: The E1 system is recommen ded by the ITU-T. E1 carries signals at 2.048 Mbit/s. G.703 defines the electrical specificatio n and G.704 defines the frame format for E1 GBFD-111202 O&M of BTS Window size of the Ater signaling link GBFD-111203 O&M of BSC
WS
Window Size
BSC6900
WTBS
Wait Time before OML Switch BSC6900
SET BTSOMLBACK UP(Optional)
Time for which the BTS waits to swap the OML after the OML is interrupted. With this parameter, the BTS does not swap the OML when the OML is interrupted transiently. GBFD-113728 OML Backup
WTBS
Ring I Wait Time Before Switch BSC6900
Waiting time before establishin g a link in the reverse direction after the transmissi SET on of a BTSRINGATTR( BTS is Optional) disrupted GBFD-117801 Ring Topology Wait to restore time
WTRT
WTR Time[Sec]
BSC6900
SET MSP(Optional)
Board GBFD-111701 Switchover
ZONET
TimeZone
BSC6900
SET TZ(Optional)
Support of Daylight Saving Time GBFD-116101 Configuration Time zone MRFD-210301 Management
Value Type GUI Value Range Actual Value Range
Unit
Default Value
Recommended Value
Interval Type
0~70
0~70
None
50
50
Interval Type
0~70
0~70
None
50
50
Interval Type
10~80
1~8, step:0.1
40
40
TRUE(Support), Enumeratio FALSE(Not n Type Support)
TRUE, FALSE
None
FALSE
FALSE
Enumeratio NO(No), n Type YES(Yes)
NO, YES
None
YES
YES
Interval Type
10~255
10~255
30
30
Interval Type
10~255
10~255
60
60
IDLETSALLOC_0 (Any idle timeslots under the same site), IDLETSALLOC_1 (Idle timeslots on same E1 primary link preferred), IDLETSALLOC_2 (Idle timeslots on same E1 primary link only), IDLETSALLOC_3 (Idle timeslots on Enumeratio same 64K n Type primary link only)
IDLETSALLOC_0, IDLETSALLOC_1, IDLETSALLOC_2, IDLETSALLOC_3
None
IDLETSALLOC_ 0 IDLETSALLOC_0
Enumeratio CLOSE(CLOSE), n Type OPEN(OPEN) CLOSE, OPEN
None
CLOSE
CLOSE
Interval Type
0~100
0~100
per cent
90
90
Enumeratio NO(NO), n Type YES(YES)
NO, YES
None
NO
NO
Interval Type
10~3600
10~3600
15
15
GSM_PHASE_1, GSM_PHASE_2, Enumeratio GSM_PHASE_2 n Type Plus
GSM_PHASE_1, GSM_PHASE_2, GSM_PHASE_2Plu s None
It is recommended that the value of this parameter is the same as that for "A Interface GSM_PHASE_2 Tag".
Interval Type
1~255
1~255
None
40
40
Interval Type
0~250
0~250
None
100
100
Enumeratio 8BIT(8BIT), n Type 11BIT(11BIT)
8BIT, 11BIT
None
8BIT
8BIT
Interval Type
0~65535
0~65535
None
NO, YES
None
NO
NO
Interval Type
0~31
0~31
None
None
None
OSubcell(Overlai d subcell), USubcell(Underla id subcell), Enumeratio NoPrefer(No OSubcell, USubcell, n Type preference) NoPrefer None
Usubcell
Usubcell
Interval Type
0~31
0~31
None
None
None
ULPRIORITY(Upl ink Priority), NEUTRAL(Neutr al Priority), ULPRIORITY, Enumeratio DLPRIORITY(Do NEUTRAL, n Type wnlink Priority) DLPRIORITY
None
NEUTRAL
NEUTRAL
Interval Type
0~9
0~9
None
Interval Type
1~10
1~10
None
Interval Type
15~7200
15~7200
120
120
Enumeratio Disable(Disable), n Type Enable(Enable) Disable, Enable
None
Enable
Enable
NO, YES
None
YES
YES
Enumeratio CLOSE(Close), n Type OPEN(Open)
CLOSE, OPEN
None
CLOSE
CLOSE
COMPUL0(Comp ulsory 0), COMPUL1(Comp Enumeratio ulsory 1), COMPUL0, n Type FLEX(Flexible) COMPUL1, FLEX
None
FLEX
FLEX
Bit Field Type
4_75KBIT/S~0 5_15KBIT/S~1 5_90KBIT/S~2 6_70KBIT/S~3 7_40KBIT/S~4 7_95KBIT/S~5 10_2KBIT/S~6 12_2KBIT/S
4_75KBIT/S, 5_15KBIT/S, 5_90KBIT/S, 6_70KBIT/S, 7_40KBIT/S, 7_95KBIT/S, 10_2KBIT/S, 12_2KBIT/S
None
4_75KBIT/S1&5_15KBIT/S0&5_90KBIT/S1&6_70KBIT/S0&7_40KBIT/S1&7_95KBIT/S0&10_2KBIT/S0&12_2KBIT/S-1
4_75KBIT/S1&5_15KBIT/S0&5_90KBIT/S1&6_70KBIT/S0&7_40KBIT/S1&7_95KBIT/S0&10_2KBIT/S0&12_2KBIT/S-1
Bit Field Type
4_75KBIT/S~0 5_15KBIT/S~1 5_90KBIT/S~2 6_70KBIT/S~3 7_40KBIT/S~4 7_95KBIT/S
4_75KBIT/S, 5_15KBIT/S, 5_90KBIT/S, 6_70KBIT/S, 7_40KBIT/S, 7_95KBIT/S
None
4_75KBIT/S1&5_15KBIT/S0&5_90KBIT/S1&6_70KBIT/S0&7_40KBIT/S1&7_95KBIT/S-0
4_75KBIT/S1&5_15KBIT/S0&5_90KBIT/S1&6_70KBIT/S0&7_40KBIT/S1&7_95KBIT/S-0
Bit Field Type
6_60KBIT/S, 8_85KBIT/S, 12_65KBIT/S
0~7
None
6_60KBIT/S1&8_85KBIT/S- 6_60KBIT/S1&12_65KBIT/S- 1&8_85KBIT/S1 1&12_65KBIT/S-1
NO, YES
None
NO
NO
Interval Type
1~255
1~255
min
10
10
Interval Type
60~300
60~300
180
180
Interval Type
610~3000
61.0~300.0 (step: 0.1)
2800
2800
Interval Type
600~2990
60.0~299.0 (step: 0.1)
1800
1800
Interval Type
60~300
60~300
280
280
NO, YES
None
NO
NO
Interval Type
0~254
0~254
None
None
None
Interval Type
0~50
0~50
ms
Interval Type
0~768
0~768
None
Bit Field Type
PORT0_CDEF, PORT1_CDEF
PORT0_CDEF, PORT1_CDEF
None
None
Interval Type
1~16777215
1~16777215
None
None
None
BYMANUAL(By Manual), Enumeratio BYAUTO(By n Type Auto)
BYMANUAL, BYAUTO
None
BYAUTO
None
0(Not support dynamic adjustment), 1(According to downlink quality measurements reported by MS), 2(According to uplink quality Enumeratio measurements n Type reported by BTS) 0, 1, 2
None
Enumeratio OFF(OFF), n Type ON(ON)
OFF, ON
None
OFF
OFF
COMMON_DLD( Common Download), QUICK_DLD1(Qu ick Download No Traffic), QUICK_DLD2(Qu COMMON_DLD, Enumeratio ick Download QUICK_DLD1, n Type Reserve BCCH) QUICK_DLD2 LOCK(Lock), UNLOCK(Unlock) , Enumeratio SHUTDOWN(Sh Lock, Unlock, n Type utdown) Shutdown
None
None
None
None
UNLOCK
UNLOCK
Lock(Lock), Unlock(Unlock), Enumeratio Shutdown(Shutdo Lock, Unlock, n Type wn) Shutdown
None
Unlock
Unlock
Lock(Lock), Unlock(Unlock), Enumeratio Shutdown(Shutdo Lock, Unlock, n Type wn) Shutdown
None
Unlock
Unlock
Compound Type
hour, min
hour{0~23} min{0~59}
None
None
None
Interval Type
0~100
0~100
None
10
10
OFF, ON
None
OFF
OFF
Compound Type
hour, min
hour{0~23} min{0~59}
None
None
None
Enumeratio RATIORULE(Rati n Type o Rule) RATIORULE
None
None
None
String Type None
1~51 characters
None
None
None
String Type None
1~51 characters
None
None
None
Interval Type
0~600
0~600
ms
400
400
Interval Type
0~60
0~60
dB
20
20
Interval Type
-60~-35,0
-60~-35, 0
dBm
-50
-50
Interval Type
0~1000
0~1000
ms
Interval Type
0~15
0~15
dB
CLOSE, OPEN
None
CLOSE
CLOSE
Interval Type
10~100
10~100
None
20
20
Interval Type
1~10
1~10
4_Times, 8_Times, 12_Times, 16_Times, 20_Times, 24_Times, 28_Times, 32_Times, 36_Times, 40_Times, 44_Times, 48_Times, 52_Times, 56_Times, Enumeratio 60_Times, n Type 64_Times
1920~30720, step:480
ms
64_Times
64_Times
Interval Type
0~63
0~30240, step:480
ms
48
48
Interval Type
0~65534
0~65534
None
None
None
Enumeratio n Type BSC(BSC)
BSC
None
None
None
1920~30720, step:480
ms
52_Times
52_Times
Interval Type Interval Type Interval Type
0~63
0~30240, step:480
ms
32
32
65334~65383
65334~65383
None
None
None
1~65535
1~65535
None
None
None
Interval Type
1~65535
1~65535
None
None
None
Interval Type
1~65535
1~65535
None
None
None
Interval Type Interval Type
1~65535
1~65535
None
None
None
65033~65533
65033~65533
None
None
None
String Type None
1~1024 characters
None
None
None
Interval Type
1~60 1~60 ALL(All), Enumeratio ONEBYONE(One n Type by One) ALL, ONEBYONE
min
15
15
None
None
None
ALL(all), Enumeratio ONEBYONE(one n Type by one) ALL, ONEBYONE
None
None
None
NO, YES
None
NO
NO
NO, YES
None
YES
YES
NO, YES
None
YES
YES
NO, YES
None
YES
YES
NO, YES
None
YES
YES
NO, YES
None
NO
NO
Enumeratio n Type ABIS(Abis), A(A) ABIS, A
None
ABIS
ABIS
Interval Type
0~100
0~100
per cent
Interval Type
0~100
0~100
per cent
Interval Type
0~100
0~100
per cent
Interval Type
0~100
0~100
per cent
10
10
Interval Type
0~100
0~100
per cent
10
10
Interval Type
0~100
0~100
per cent
10
10
NO(Not Supported), R3(Only R3 Supported), R2(Only R2 Supported), R2ANDR3(R2 Enumeratio And R3 n Type Supported)
NO, R3, R2, R2ANDR3
None
NO
NO
-12~12
-12~12
dB
-23~-4
-23~-4
dBm
-18
-18
Interval Type
3~12
3~12
dB
Interval Type
-23~-4
-23~-4
dBm
-4
-4
Interval Type
-23~-4
-23~-4
dBm
-23
-23
FIXEDLEVEL(Fix ed level mode), ADAPTIVE(Adapt ive mode), FIXEDLEVEL, Enumeratio FIXEDGAIN(Fixe ADAPTIVE, n Type d gain mode) FIXEDGAIN
None
FIXEDGAIN
FIXEDGAIN
CLOSE, OPEN
None
CLOSE
CLOSE
Interval Type
5~15
5~15
None
Interval Type
1~255
1~255
Interval Type
0~4000000
0~4000000
kbit/s
None
None
NOTALLOW(Not Enumeratio Allow), NOTALLOW, n Type ALLOW(Allow) ALLOW
None
ALLOW
ALLOW
OFF, ON
None
OFF
OFF
Interval Type
0~100
0~100
per cent
100
100
NOTALLOW(Not Enumeratio Allow), NOTALLOW, n Type ALLOW(Allow) ALLOW
None
NOTALLOW
NOTALLOW
Interval Type
0~16
0~16
None
Interval Type
0~100
0~100
per cent
100
100
ALLCIC(Set all Timeslots CIC), Enumeratio ALLNULL(Set all n Type Timeslots Null) ALLCIC, ALLNULL
None
None
ALLCIC
ALLCIC(Set all Timeslots CIC), Enumeratio ALLNULL(Set all ALLCIC, n Type Timeslots Null) ALLNULL
None
ALLCIC
ALLCIC
Interval Type
0~2000
0~2000
mA
30
30
Interval Type
0~2000
0~2000
mA
30
30
Interval Type
0~2000
0~2000
mA
30
30
Interval Type
0~2000
0~2000
mA
30
30
Interval Type
0~2000
0~2000
mA
30
30
Interval Type
0~2000
0~2000
mA
30
30
Interval Type
0~65535
0~65535
None
None
Enumeratio NO(NO), n Type YES(YES) Interval Type Interval Type
NO, YES
None
YES
YES
0~65534
0~65534
None
None
None
0~65535
0~65535
None
None
None
Interval Type
0~15
0~15
mA
10
10
Interval Type
45~155
45~155
mA
100
100
Interval Type
125~175
125~175
mA
150
150
Interval Type
0~65535
0~65535
None
None
Interval Type
0~100
0~100
per cent
Interval Type
0~100
0~100
per cent
Interval Type
0~250
0~250
None
Interval Type
0~250
0~250
None
NO, YES
None
NO
NO
Enumeratio flt(Fault), n Type evt(Event), all(All) flt, evt, all
None
all
all
0(0.0), 1(0.1), 2(0.2), 3(0.3), 4(0.4), 5(0.5), 6(0.6), 7(0.7), Enumeratio 8(0.8), 9(0.9), n Type 10(1.0)
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
None
Interval Type
0~9
0~0.9, step:0.1
Interval Type
-1000~10000
-1000~10000
None
None
Interval Type
0~6553
0~6553
40
40
Interval Type
-3281~32810
-3281~32810
feet
None
None
Bit Field Type
Critical, Major, Minor, Warning
Critical, Major, Minor, Warning
None
None
None
Critical(Critical), Major(Major), Minor(Minor), Enumeratio Warning(Warning Critical, Major, n Type ) Minor, Warning
None
None
None
DISABLED(Disab led), Enumeratio ENABLED(Enabl DISABLED, n Type ed) ENABLED
None
DISABLED
DISABLED
None
DISABLED
DISABLED
None
DISABLED
DISABLED
None
DISABLED
DISABLED
None
DISABLED
DISABLED
None
DISABLED
DISABLED
Interval Type
1~16
2~32, step:2
dB
16
16
OFF(Not Enumeratio Allowed), n Type ON(Allowed)
OFF, ON
None
ON
ON
NO, YES
None
NO
NO
Interval Type
1~20
TCH:480~9600, step:480; SDCCH:470~9400, step:470
ms
Interval Type
0~3
0~3
None
Interval Type
0~7
0~7
None
Interval Type
0~7
0~7
None
Interval Type
1~20
ms
Interval Type
0~7
0~7
None
Interval Type
0~63
0~63
dB
Interval Type
0~63
0~63
dB
33
33
Interval Type
0~63
0~63
dB
25
25
NO, YES
None
NO
NO
Interval Type
0~255
0~255
dB
Interval Type
0~255
0~255
dB
20
20
Interval Type
0~255
0~255
dB
Interval Type
0~255
0~255
dB
100
100
Interval Type
0~7
0~7
None
Interval Type
0~100
0~100
per cent
75
75
Interval Type
0~255
0~255
dB
Interval Type
0~255
0~255
dB
108
108
NO, YES
None
NO
NO
Interval Type
0~7
0~7
None
Interval Type
0~100
0~100
per cent
15
15
Interval Type
0~32
0~32
dB
Interval Type
0~30
0~30
dB
Interval Type
0~30
0~30
dB
Interval Type
0~30
0~30
dB
Interval Type
0~32
0~32
dB
NO, YES
None
YES
YES
Interval Type
1~15
480~7200, step:480 ms
Interval Type
0~4
0~4
dB
Interval Type
0~15
0~15
None
Enumeratio OFF(Off), n Type ON(On)
OFF, ON
None
ON
ON
Interval Type
0~99
0~99
per cent
55
55
NO, YES
None
NO
NO
Interval Type
1~20
ms
Interval Type
0~3
0~3
None
Interval Type
0~7
0~7
None
Interval Type
0~7
0~7
None
Interval Type
1~20
ms
Interval Type
0~7
0~7
None
Interval Type
0~63
0~63
dB
Interval Type
0~63
0~63
dB
30
30
Interval Type
0~63
0~63
dB
18
18
Interval Type
0~65535
0~65535
None
Interval Type
0~65535
0~65535
None
Interval Type
3~30
3~30
dB
CLOSE, OPEN
None
CLOSE
CLOSE
Interval Type
10~30
10~30
dB
12
12
String Type None
1~5 characters
None
None
None
Interval Type
0~4599
0~4599
None
None
None
Interval Type
0~4599
0~4599
None
None
None
String Type None
1~100 characters
None
None
None
MODE0(Mode 0), Enumeratio MODE1(Mode 1), MODE0, MODE1, n Type MODE2(Mode 2) MODE2
None
MODE0
MODE0
-32~0
-32~0
dB
-13
-13
-64~0
-64~0
dB
-48
-48
CLOSE, OPEN
None
CLOSE
CLOSE
Interval Type
0~360
0~360
degree
360 None
Interval Type
0~1000
0~1000
SENDPOWER(S end Power), Enumeratio NOPOWER(No SENDPOWER, n Type Power) NOPOWER
None
NOPOWER
NOPOWER
OFF, ON
None
OFF
OFF
NO, YES
None
NO
NO
Interval Type
0~35
0~35
None
None
None
Enumeratio n Type A(A), B(B)
A, B
None
None
None
Enumeratio n Type A(A), B(B)
A, B
None
None
None
Enumeratio A(A), B(B), n Type NULL(NULL)
A, B, NULL
None
NULL
NULL
Interval Type
0~335
0~335
None
None
None
Enumeratio M3UA(M3UA), n Type BBAP(BBAP)
M3UA, BBAP
None
None
None
MTP2(MTP2), OTHER(OTHER) , Enumeratio TCSTM1(TCSTM MTP2, OTHER, n Type 1) TCSTM1
None
None
None
Interval Type
1~65535
1~65535
packet
20
20
Interval Type
1~65535
1~65535
bit
1024
1024
Interval Type
1~65535
1~65535
bit
256
256
Interval Type
1~65535
1~65535
packet
20
20
Interval Type
1~65535
1~65535
packet
10
10
Interval Type
1~65535
1~65535
packet
20
20
CLOSE, OPEN
None
CLOSE
CLOSE
Interval Type
1~65535
1~65535
bit
384
384
Interval Type
0~65535
0~65535
None
0 None
PRIMARY(Primar y Area), STANDBY(Stand by Area), Enumeratio ALL(Primary and PRIMARY, n Type Standby Area) STANDBY, ALL PRIMARY(Primar y), Enumeratio STANDBY(Stand PRIMARY, n Type by) STANDBY
None
PRIMARY
None
None
PRIMARY
PRIMARY
Interval Type
0~80
0~80
per cent
50
50
Interval Type
5~126
5~126
None
100
100
Interval Type
5~100
5~100
per cent
100
100
Interval Type
3~10
3~10
None
Interval Type
3~10
3~10
ms
Interval Type
0~27
0~27
None
None
None
Interval Type
0~27
0~27
None
None
None
Interval Type
0~11
0~11
None
None
None
Bit Field Type
power, env, sig, trunk, hardware, software, run, comm, service, handle
None
None
None
power(Power System), env(Environment System), sig(Signaling System), trunk(Trunk System), hardware(Hardwa re System), software(Softwar e System), run(Running System), comm(Communic ation System), service(QoS), Enumeratio handle(Processin n Type g Error)
None
None
None
OFF, ON
None
OFF
OFF
DISABLE(Disable Enumeratio ), n Type ENABLE(Enable) DISABLE, ENABLE None
DISABLE
DISABLE
Interval Type
0~61
0~61
dB
35
35
Interval Type
0~62,255
0~62, 255
None
None
None
Interval Type
0~62
0~62
None
None
None
Interval Type
0~23,255
0~23, 255
None
None
None
Interval Type
0~23
0~23
None
None
None
Interval Type
0~255
0~255
None
None
None
Interval Type
0~254
0~254
None
None
None
Interval Type
0~63
0~63
dB
30
30
Interval Type
500~60000
500~60000
ms
10000
10000
Interval Type
1~300
1~300
30
30
Interval Type
1~300
1~300
60
60
Interval Type
1~300
1~300
30
30
Interval Type
1~300
1~300
60
60
Interval Type
1~300
1~300
30
30
Interval Type
1~300
1~300
30
30
Interval Type
1~300
1~300
20
20
Enumeratio NO(Close), n Type YES(Open)
NO, YES
None
NO
NO
Interval Type
0~63
0~63
dB
Interval Type
0~63
0~63
dB
10
10
NO, YES
None
YES
YES
Enumeratio Close(Close), n Type Open(Open)
Close, Open
None
Open
Open
Interval Type
80~100
80~100
per cent
85
85
Interval Type
0~254
0~254
None
None
None
Interval Type
0~100 TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
0~100
per cent
90
90
Bit Field Type
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None
None
None
Enumeratio n Type NO, YES
NO, YES
None
None
None
Interval Type
0~1
0~1
None
None
None
Interval Type
0~254
0~254
None
None
None
Interval Type
0~2047
0~2047
None
None
None
Enumeratio TDM(TDM), n Type IP(IP)
TDM, IP
None
TDM
TDM
A(Tributary A), Enumeratio B(Tributary B), n Type ALL(All Tributary) A, B, ALL TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None
None
None
Bit Field Type
None
None
None
NO, YES
None
YES
YES
Interval Type
0~15
0~15
dB
Interval Type
0~15
0~15
dB
1~65535
1~65535
min
None
60
1~60
1~60
min
NONE(Verify None), Enumeratio PEER(Verify n Type Peer Certificate)
NONE, PEER
None
None
None
SERVER(SERVE Enumeratio R), n Type CLIENT(CLIENT) SERVER, CLIENT
None
None
None
SERVER(SERVE Enumeratio R), n Type CLIENT(CLIENT) SERVER, CLIENT
None
None
None
Enumeratio SERVER(Server) n Type , CLIENT(Client) SERVER, CLIENT
None
None
None
String Type None
1~63 characters
None
None
None
String Type None
1~63 characters
None
None
None
String Type None
1~64 characters
None
None
None
String Type None
1~15 characters
None
None
None
String Type None
1~15 characters
None
None
None
String Type None
1~16 characters
None
None
None
NO_V(NO_V), PAP_V(PAP_V), Enumeratio CHAP_V(CHAP_ NO_V, PAP_V, n Type V) CHAP_V
None
NO_V
NO_V
NO_V(NO_V), PAP_V(PAP_V), Enumeratio CHAP_V(CHAP_ NO_V, PAP_V, n Type V) CHAP_V
None
NO_V
NO_V
NO_V(No Validate), PAP_V(PAP Validate), Enumeratio CHAP_V(CHAP n Type Validate)
NO_V, PAP_V, CHAP_V
None
NO_V
NO_V
Enumeratio ENABLE, n Type DISABLE
ENABLE, DISABLE None
None
ENABLE
NO, YES
None
YES
None
NO, YES
None
YES
YES
NO, YES
None
YES
YES
NO, YES
None
NO
NO
None
ENABLED
ENABLED
BTSAUTODLDA CT(BTS Software Auto DL and ACT), TMUAUTOACT(T Enumeratio MU Software BTSAUTODLDACT, n Type Auto ACT) TMUAUTOACT None Enumeratio OFF(Off), n Type ON(On)
None
None
OFF, ON
None
ON
None
Interval Type
1~65535
1~65535
min
None
None
Enumeratio AU4(AU4), n Type AU3(AU3)
AU4, AU3
None
None
AU4
GSM_PHASE_1, GSM_PHASE_2, Enumeratio GSM_PHASE_2 n Type Plus Enumeratio LOW(LOW), n Type HIGH(HIGH)
GSM_PHASE_2 is recommended in common scenarios. If AMR services, interRAT handover, eMLPP, or A over IP mode needs to be supported, "GSM_PHASE_2Plus" GSM_PHASE_2 is recommended.
LOW, HIGH
None
HIGH
None
Enumeratio LOW(LOW), n Type HIGH(HIGH)
LOW, HIGH
None
LOW
LOW
O1E3_R1E4(OC CUR:1E-3, RECOVERY:1E4), O1E4_R1E5(OC CUR:1E-4, RECOVERY:1E5), O1E5_R1E6(OC CUR:1E-5, RECOVERY:1E6), O1E6_R1E7(OC CUR:1E-6, RECOVERY:1E7), O1E7_R1E8(OC CUR:1E-7, RECOVERY:1E8), O1E8_R1E9(OC CUR:1E-8, RECOVERY:1E9), O1E9_R1E10(O CCUR:1E-9, RECOVERY:1E10), O1E10_R1E11(O CCUR:1E-10, RECOVERY:1E11), Enumeratio O1E11_R1E12(O n Type CCUR:1E-11,
O1E3_R1E4, O1E4_R1E5, O1E5_R1E6, O1E6_R1E7, O1E7_R1E8, O1E8_R1E9, O1E9_R1E10, O1E10_R1E11, O1E11_R1E12
None
None
None
O1E3_R1E4(OC CUR:1E-3, RECOVERY:1E4), O1E4_R1E5(OC CUR:1E-4, RECOVERY:1E5), O1E5_R1E6(OC CUR:1E-5, RECOVERY:1E6), O1E6_R1E7(OC CUR:1E-6, RECOVERY:1E7), O1E7_R1E8(OC CUR:1E-7, RECOVERY:1E8), O1E8_R1E9(OC CUR:1E-8, RECOVERY:1E9), O1E9_R1E10(O CCUR:1E-9, RECOVERY:1E10), O1E10_R1E11(O CCUR:1E-10, RECOVERY:1E11), Enumeratio O1E11_R1E12(O n Type CCUR:1E-11,
O1E3_R1E4, O1E4_R1E5, O1E5_R1E6, O1E6_R1E7, O1E7_R1E8, O1E8_R1E9, O1E9_R1E10, O1E10_R1E11, O1E11_R1E12
None
None
None
O1E4_R1E5(OC CUR:1E-4, RECOVERY:1E5), O1E5_R1E6(OC CUR:1E-5, RECOVERY:1E6), O1E6_R1E7(OC CUR:1E-6, RECOVERY:1E7), O1E7_R1E8(OC CUR:1E-7, RECOVERY:1E8), O1E8_R1E9(OC CUR:1E-8, RECOVERY:1E9), O1E9_R1E10(O CCUR:1E-9, RECOVERY:1E10), O1E10_R1E11(O CCUR:1E-10, Enumeratio RECOVERY:1En Type 11)
O1E4_R1E5, O1E5_R1E6, O1E6_R1E7, O1E7_R1E8, O1E8_R1E9, O1E9_R1E10, O1E10_R1E11
None
None
None
O1E4_R1E5(OC CUR:1E-4, RECOVERY:1E5), O1E5_R1E6(OC CUR:1E-5, RECOVERY:1E6), O1E6_R1E7(OC CUR:1E-6, RECOVERY:1E7), O1E7_R1E8(OC CUR:1E-7, RECOVERY:1E8), O1E8_R1E9(OC CUR:1E-8, RECOVERY:1E9), O1E9_R1E10(O CCUR:1E-9, RECOVERY:1E10), O1E10_R1E11(O CCUR:1E-10, Enumeratio RECOVERY:1En Type 11)
O1E4_R1E5, O1E5_R1E6, O1E6_R1E7, O1E7_R1E8, O1E8_R1E9, O1E9_R1E10, O1E10_R1E11
None
None
None
OFF, ON
None
OFF
None
OFF, ON
None
OFF
None
String Type None
0~200 characters
None
None
None
String Type None
0~128 characters
None
None
None
Interval Type
0~70
0~70
None
55
55
CLOSE(Close), LOCALTLLI(Loca l TLLI Opt), CLOSE, Enumeratio ALLTLLI(All TLLI LOCALTLLI, n Type Opt) ALLTLLI
None
ALLTLLI
ALLTLLI
String Type None
1~64 characters
None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
BYTRX(Turn off TRX), Enumeratio BYPWR(Reduce n Type Backup Power) BYTRX, BYPWR
None
BYTRX
BYTRX
BYCOVER(Cover Priority), BYCAP(Capabilit y Priority), Enumeratio BYSAVING(Savin BYCOVER, BYCAP, n Type g Priority) BYSAVING None
BYCOVER
BYCOVER
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
1~200
1~200
20
20
String Type None
1~80 characters
None
None
None
Interval Type
0~2047
0~2047
None
None
None
Battery1Temp(Ba ttery 1 Temperature), Battery2Temp(Ba Enumeratio ttery 2 Battery1Temp, n Type Temperature) Battery2Temp
None
Battery1Temp
For EPS4815 boards, the value of this parameter is always "Battery1Temp".
Battery1Temp(Ba ttery 1 Temperature), Battery2Temp(Ba Enumeratio ttery 2 Battery1Temp, n Type Temperature) Battery2Temp
None
Battery1Temp
Battery1Temp
Interval Type
30~1000
30~1000
Ah
50
50
NO, YES
None
NO
NO
Interval Type
0~90
0~90
per cent
50
50
NO_BAT(No Storage Battery), INSIDE_BAT(Insi de Storage Battery), OUTSIDE_BAT( NO_BAT, Enumeratio Outside Storage INSIDE_BAT, n Type Battery) OUTSIDE_BAT
None
NO_BAT
NO_BAT
Interval Type
1024~65535
1024~65535
None
58000
58000
Interval Type
0~254
0~254
None
Interval Type
0~5000
0~5000
Ah
36
36
Interval Type
0~7
0~7
None
None
None
Interval Type
0~7
0~7
None
None
None
0~7
0~7
None
None
None
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Enumeratio NO_Hop(No n Type hop), Hop(Hop)
NO_Hop, Hop
None
None
None
Interval Type
0~100
0~100
per cent
80
80
Interval Type
0~100
0~100
per cent
60
60
Interval Type
0~63
0~63
None
14
14
Interval Type
0~511
0~511
None
None
None
Interval Type
5~25
5~25
per cent
If "Power System Type" is "APM30", the recommended value is "7". For other Power System Type, the recommended value is 15 "15".
Interval Type
433~576
43.3~57.6 (step: 0.1) V
565
565
NO, YES
None
NO
NO
Interval Type
1~10
1~10
None
Interval Type
1~10
1~10
None
Interval Type
1~10
1~10
None
MTP3(MTP3), M3UA(M3UA), Enumeratio MTP3_M3UA(MT MTP3, M3UA, n Type P3 and M3UA) MTP3_M3UA
None
None
None
Interval Type
1~60
1~60
Interval Type
0~10
0~10
None
Interval Type
0~3
0~3
None
NO, YES
None
NO
NO
NO, YES
None
YES
YES
Interval Type
1~32
0.5~16, step:0.5
Interval Type
1~32
0.5~16, step:0.5
Interval Type
3~10
3~10
None
Interval Type
1~2
1~2
None
None
None
Interval Type
10~254
10~254
None
30
30
Enumeratio ALL(All), n Type PART(Part)
ALL, PART
None
ALL
ALL
Interval Type
-10000~10000
-10000~10000
None
None
None
Interval Type
1~10
1~10
None
Interval Type
1~10
1~10
None
Interval Type
1~10
1~10
None
ENABLE
None
Interval Type
0~65534
0~65534
0 None
Interval Type
60~65534
60~65534
900 None
ENABLE
None
Interval Type
1~6
1~6
None
Interval Type
1~120
1~120
10
10
Interval Type
0~335
0~335
None
None
None
Interval Type
0~5,8~27
0~5, 8~27
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~5000
0~5000
1000
1000
NO, YES
None
None
NO
nonrpt(Not Enumeratio Report), n Type rpt(Report)
nonrpt, rpt
None
None
None
0(0), 1(1), 2(2), 3(3), 4(4), 5(5), Enumeratio 6(6), n Type NULL(NULL)
0, 1, 2, 3, 4, 5, 6, NULL
None
NULL
NULL
0(0), 1(1), 2(2), 3(3), 4(4), 5(5), Enumeratio 6(6), n Type NULL(NULL)
0, 1, 2, 3, 4, 5, 6, NULL
None
NULL
NULL
NO, YES
None
YES
YES
Interval Type
1~16
0.5~8, step:0.5
Interval Type
0~127
0~127
dB
69
69
Interval Type
1~16
0.5~8, step:0.5
Enumeratio SCU, GCU, XPU, SCU, GCU, XPU, n Type INT, TNU INT, TNU
None
None
None
Enumeratio SCU, GCU, XPU, SCU, GCU, XPU, n Type DPU, INT, TNU DPU, INT, TNU
None
None
None
SCU, GCU, MPU, SCU, GCU, MPU, Enumeratio GCP, DPU, INT, GCP, DPU, INT, n Type TNU TNU
None
None
None
Enumeratio INT, DPU, XPU, INT, DPU, XPU, n Type TNU, OMU, SAU TNU, OMU, SAU Interval Type
None
None
None
0~72
0~72
None
None
None
Interval Type
0~47
0~47
None
None
None
Interval Type
0~1000
0~100000 (step: 100)
kbit/s
None
None
DATM_MAIN, DATU_MAIN, DDPM_MAIN, DDPU_MAIN, DDRM_MAIN, DEMU_MAIN, DFCU_MAIN, DGPS_MAIN, DHEU_MAIN, DOMU_MAIN, DPMU_MAIN, DPTU_MAIN, DRFU_MAIN, DRFUBOOT_MAI N, DRRU_MAIN, DRRUBOOT_MA IN, DRU_MAIN, DTCU_MAIN, DTMU_MAIN, DTRU_MAIN, ETR_MAIN, FMU_MAIN, FMUA_MAIN, GATM_MAIN, GTMU_MAIN, IASU_MAIN, IOMU_MAIN, MFU_3001C, MMU_3001C, MRRU_MAIN, MTR_MAIN, NFCB_MAIN, Enumeratio PBU_MAIN, n Type QTRU_MAIN,
DATM_MAIN, DATU_MAIN, DDPM_MAIN, DDPU_MAIN, DDRM_MAIN, DEMU_MAIN, DFCU_MAIN, DGPS_MAIN, DHEU_MAIN, DOMU_MAIN, DPMU_MAIN, DPTU_MAIN, DRFU_MAIN, DRFUBOOT_MAIN, DRRU_MAIN, DRRUBOOT_MAIN, DRU_MAIN, DTCU_MAIN, DTMU_MAIN, DTRU_MAIN, ETR_MAIN, FMU_MAIN, FMUA_MAIN, GATM_MAIN, GTMU_MAIN, IASU_MAIN, IOMU_MAIN, MFU_3001C, MMU_3001C, MRRU_MAIN, MTR_MAIN, NFCB_MAIN, PBU_MAIN, QTRU_MAIN, None
None
None
Interval Type
0~1000
0~100000 (step: 100)
kbit/s
None
None
Enumeratio n Type DPUa, DPUc PEUa, FG2a, GOUa, EIUa, OIUa, POUc, FG2c, GOUc, XPUa, XPUb, DPUa, DPUb, DPUc, DPUd, Enumeratio TNUa, OMUa, n Type OMUb, SAUa
DPUa, DPUc
None
None
None
PEUa, FG2a, GOUa, EIUa, OIUa, POUc, FG2c, GOUc, XPUa, XPUb, DPUa, DPUb, DPUc, DPUd, TNUa, OMUa, OMUb, SAUa None
None
None
Enumeratio FG2a, GOUa, n Type FG2c, GOUc Enumeratio n Type PEUa, POUc Enumeratio n Type PEUa, POUc Enumeratio n Type PEUa, POUc MRRU, GRRU, Enumeratio MRFU, GRFU, n Type BTS3900E
FG2a, GOUa, FG2c, GOUc None
None
None
PEUa, POUc
None
None
None
PEUa, POUc
None
None
None
PEUa, POUc MRRU, GRRU, MRFU, GRFU, BTS3900E
None
None
None
None
None
None
TMU(TMU/DTMU ), DTRU(DTRU), DPTU(DPTU), QTRU(QTRU), MRRU(MRRU), GRRU(GRRU), BTS3900B(BTS3 900B), MRFU(MRFU), GRFU(GRFU), BTS3900E(BTS3 900E), DRFU(DRFU), DRRU(DRRU), Enumeratio UBRI(UBRI), n Type UTRP(UTRP)
TMU, DTRU, DPTU, QTRU, MRRU, GRRU, BTS3900B, MRFU, GRFU, BTS3900E, DRFU, DRRU, UBRI, UTRP None
None
None
Interval Type
0~255
0~255
Any Type
None
1~80 characters
None
Cell name
None
Interval Type
2~3600
2~3600
60
60
ENTIRE(Entire Backup), INCREMENTAL(I Enumeratio ncremental ENTIRE, n Type Backup) INCREMENTAL
None
INCREMENTAL None
Interval Type
0~7
0~7
None
Interval Type
1~16777215
1~16777215
None
None
None
NO, YES
None
NO
NO
MAINBSC(MAIN BSC), Enumeratio SUBBSC(SUB MAINBSC, n Type BSC) SUBBSC
None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
Compound Type
hour, min
hour{0~23} min{0~59}
None
None
None
Compound Type
hour, min
hour{0~23} min{0~59}
None
None
None
Interval Type
0~15
0~15
None
None
None
Interval Type
0~15
0~15
None
None
None
Interval Type
5~60
5~60
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
UNCONDITIONA LSTART(Uncondi tional Start), ATERCONGEST S(Start When Ater Congests), PREFIXNUMBER Enumeratio (Start by Prefix n Type Number)
UNCONDITIONALS TART, ATERCONGESTS, PREFIXNUMBER None
UNCONDITION UNCONDITIONALST ALSTART ART
String Type None
1~64 characters
None
None
None
NO, YES
None
YES
YES
NO, YES
None
NO
NO
Interval Type
0~335
0~335
None
None
None
Interval Type
0~65535
0~65535
None
None
None
NO, YES
None
YES
YES
NO, YES
None
YES
YES
NO, YES
None
NO
NO
Interval Type
0~65535
0~65535
None
65535
65535
Interval Type
0~65535
0~65535
None
65535
65535
Interval Type
0~65535
0~65535
None
65535
65535
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~65535
0~65535
None
Interval Type
0~65535
0~65535
None
Interval Type
0~65535
0~65535
None
Interval Type
0~65535
0~65535
None
Interval Type
0~65535
0~65535
None
Interval Type
0~65535
0~65535
None
Interval Type
0~65535
0~65535
None
Interval Type
0~65535
0~65535
None
65535
65535
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~65535
0~65535
None
65535
65535
Interval Type
0~65535
0~65535
None
65535
65535
Interval Type
0~65535
0~65535
None
65535
65535
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~65535
0~65535
None
65535
65535
Interval Type
0~27
0~27
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~7
0~7
None
None
None
Interval Type
0~2500
0~2500
None
None
None
0~15
0~15
None
None
None
1~15
1~15
None
None
None
Interval Type
1~31
1~31
None
None
None
Interval Type
0~15
0~15
None
10
10
Enumeratio NO(No), n Type YES(Yes) Interval Type
NO, YES
None
YES
YES
0~12
0~12
None
2_M_PERIOD(2 Multiframe Period), 3_M_PERIOD(3 Multiframe Period), 4_M_PERIOD(4 Multiframe Period), 5_M_PERIOD(5 Multiframe Period), 6_M_PERIOD(6 Multiframe Period), 7_M_PERIOD(7 Multiframe Period), 8_M_PERIOD(8 Multiframe Period), 9_M_PERIOD(9 Enumeratio Multiframe n Type Period) Interval Type Interval Type
940~4230, step: 470 ms
2_M_PERIOD
2_M_PERIOD
1~4
1~4
None
0~12
0~12
None
NEITHERSTART (Neither Start), BTSPRIORITY(B TS Priority), BSCPRIORITY(B SC Priority), BTSONLY(BTS Only), Enumeratio BSCONLY(BSC n Type Only)
NEITHERSTART, BTSPRIORITY, BSCPRIORITY, BTSONLY, BSCONLY
None
NEITHERSTAR T NEITHERSTART
NONSUPPORT( Not Support), BASIC(Basic Fun), Enumeratio ENHANCED(Enh NONSUPPORT, n Type anced Fun) BASIC, ENHANCED None
NONSUPPORT NONSUPPORT
Enumeratio NO(NO), n Type YES(YES) Enumeratio PEUa, EIUa, n Type OIUa, POUc SCUa, GCUa, GCGa, PEUa, FG2a, GOUa, EIUa, OIUa, POUc, FG2c, GOUc, XPUa, XPUb, DPUa, Enumeratio DPUb, DPUc, n Type DPUd, TNUa
NO, YES PEUa, EIUa, OIUa, POUc
None
YES
YES
None
None
None
SCUa, GCUa, GCGa, PEUa, FG2a, GOUa, EIUa, OIUa, POUc, FG2c, GOUc, XPUa, XPUb, DPUa, DPUb, DPUc, DPUd, TNUa None
None
None
SCUa, GCUa, GCGa, PEUa, FG2a, GOUa, EIUa, OIUa, POUc, FG2c, GOUc, XPUa, XPUb, DPUa, DPUb, DPUc, Enumeratio DPUd, TNUa, n Type ALL
SCUa, GCUa, GCGa, PEUa, FG2a, GOUa, EIUa, OIUa, POUc, FG2c, GOUc, XPUa, XPUb, DPUa, DPUb, DPUc, DPUd, TNUa, ALL None
None
None
Enumeratio PEUa, POUc, n Type EIUa, OIUa Enumeratio PEUa, POUc, n Type EIUa
PEUa, POUc, EIUa, OIUa None
None
None
PEUa, POUc, EIUa None
None
None
Enumeratio PEUa, POUc, n Type EIUa, OIUa
PEUa, POUc, EIUa, OIUa None
None
None
Enumeratio n Type POUc, OIUa
POUc, OIUa
None
None
None
Enumeratio n Type POUc, OIUa FG2a, GOUa, Enumeratio FG2c, GOUc, n Type POUc
POUc, OIUa
None
None
None
FG2a, GOUa, FG2c, GOUc, POUc None
None
None
Enumeratio n Type EIUa
EIUa
None
None
None
DATU(DATU), GATM(GATM), DRRU(DRRU), MRRU(MRRU), MRFU(MRFU), GRFU(GRFU), GRRU(GRRU), Enumeratio BTS3900E(BTS3 n Type 900E) CDU(CDU), PCDU(PCDU), DCDU(DCDU), CDUC(CDUC), CDUP(CDUP), RCDU(RCDU), CDUR(CDUR), CDUE(CDUE), EDU(EDU), PEDU(PEDU), REDU(REDU), DEDU(DEDU), EDUC(EDUC), EDUP(EDUP), EDUR(EDUR), EDUE(EDUE), DDPM_DDPU(D DPM_DDPU), Enumeratio DFCU(DFCU), n Type DFCB(DFCB)
DATU, GATM, DRRU, MRRU, MRFU, GRFU, GRRU, BTS3900E
None
None
None
CDU, PCDU, DCDU, CDUC, CDUP, RCDU, CDUR, CDUE, EDU, PEDU, REDU, DEDU, EDUC, EDUP, EDUR, EDUE, DDPM_DDPU, DFCU, DFCB None
None
None
PWC(PWC), EAC_EMUA(EAC _EMUA), DTMU(DTMU), DATM_DATU(DA TM_DATU), NFCB(NFCB), EMU_DEMU(EM U_DEMU), DPMU(DPMU), DCBM_DCOM(D CBM_DCOM), DHEU(DHEU), ECOM(ECOM), MFU(MFU), MPW(MPW), MCD(MCD), IASU(IASU), PTU(PTU), TMU(TMU), PSU_APSU(PSU _APSU), PMU_APMU(PM U_APMU), 3001C_MFU(300 1C_MFU), TEU(TEU), TES(TES), PBU(PBU), DPBU(DPBU), RPBU(RPBU), PPBU(PPBU), Enumeratio SCU(SCU), n Type MDU(MDU), DRRU(DRRU), DRFU(DRFU), MRRU(MRRU), XRRU(XRRU), MRFU(MRFU), GRFU(GRFU), GRRU(GRRU), XRFU(XRFU), Enumeratio BTS3900E(BTS3 n Type 900E)
BIE, PWC, EAC, EMUA, MCK, DTMU, DATM_DATU, NFCB, EMU_DEMU, DPMU, DCBM_DCOM, DHEU, ECOM, MFU, MPW, MCD, IASU, PTU, TMU, PSU, PMU, APMU, 3001C_MFU, TEU, TES, PBU, DPBU, RPBU, PPBU, SCU, MDU, UPEU, UEIU, FMU, FMUA, DTCU, GATM, DGPS, USCU, UBRI, FAN, EMU, PMU, TCU, PSU, UTRP None
None
None
DRRU, DRFU, MRRU, XRRU, MRFU, GRFU, GRRU, XRFU, BTS3900E
None
None
None
TRX(TRX_DEFA ULT), TRX_GPRS(TRX _GPRS), DRU(TRX_30), PTRX(PTRX), ETRX(ETRX), RTRX(RTRX), DTRX(DTRX), RETR(RETR), DETR(DETR), EETR(EETR), PETR(PETR), MTR(MTR), Enumeratio TRU(TRU/DTRU) n Type , QTRU(QTRU) CDU(CDU), CDUC(CDUC), CDUP(CDUP), CDUR(CDUR), CDUE(CDUE), PCDU(PCDU), RCDU(RCDU), DCDU(DCDU), EDU(EDU), EDUC(EDUC), EDUP(EDUP), EDUR(EDUR), EDUE(EDUE), PEDU(PEDU), REDU(REDU), DEDU(DEDU), DDPM_DDPU(D DPM_DDPU), Enumeratio DFCU(DFCU), n Type DFCB(DFCB)
TRX_30_OR_DRU, TRX_GPRS, PTRX, ETRX, RTRX, DTRX, RETR, DETR, EETR, PETR, MTR, TRU, QTRU None
None
None
CDU, CDUC, CDUP, CDUR, CDUE, PCDU, RCDU, DCDU, EDU, EDUC, EDUP, EDUR, EDUE, PEDU, REDU, DEDU, DDPM_DDPU, DFCU, DFCB None
None
None
Enumeratio CFGBM(BM), n Type CFGTC(TC)
CFGBM, CFGTC
None
None
None
Enumeratio CFGBM(BM), n Type CFGTC(TC)
CFGBM, CFGTC
None
None
None
NO, YES
None
YES
YES
String Type None
1~64 characters
None
None
None
LOGICIP(Logic IP), PORTIP(Port IP), Enumeratio PPP/MP(PPP/MP LOGICIP, PORTIP, n Type ) PPP/MP None LOGICIP(Logic IP), PORTIP(Port IP), Enumeratio PPP/MP(PPP/MP LOGICIP, PORTIP, n Type ) PPP/MP None
LOGICIP
LOGICIP
None
None
String Type None
0~64 characters
None
None
None
None
CLOSE
CLOSE
Interval Type
0~2047
0~2047
None
None
None
Interval Type
0~2047
0~2047
None
None
None
Interval Type
0~2047
0~2047
None
None
None
Interval Type
0~2047
0~2047
None
None
None
Interval Type
0~2047
0~2047
None
None
None
BYIDX(By BTS Index), Enumeratio BYNAME(By BTS n Type Name) BYIDX, BYNAME
None
None
None
BYNAME(By Enumeratio Name), BYID(By n Type Index) BYNAME, BYID
None
None
None
Interval Type
0~2047,65535
0~2047, 65535
None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
UNCONDITIONA LSTART(Uncondi tional Start), ABISCONGESTS (Start When Abis Congests), PREFIXNUMBER Enumeratio (Start by Prefix n Type Number) IP Address Type
UNCONDITIONALS TART, ABISCONGESTS, PREFIXNUMBER None 0.0.0.0~255.255.255 .255 None
UNCONDITION UNCONDITIONALST ALSTART ART
None
None
None
BSC_Preprocessi ng(BSC preprocessing), BTS_Preprocessi BSC_Preprocessing Enumeratio ng(BTS , n Type preprocessing) BTS_Preprocessing None
BTS_Preprocess ing BTS_Preprocessing
String Type None
1~64 characters
None
None
None
String Type None
1~64 characters
None
None
None
String Type None
1~2048 characters
None
None
None
OFF, ON
None
ON
ON
NO, YES
None
NO
NO
Interval Type
1~16
2~32, step:2
dB
16
16
OFF, ON
None
OFF
OFF
String Type None
1~256 characters
None
None
None
Interval Type
1~250
1~250
None
None
None
BTS30, BTS312, BTS3001C, BTS3001CP, BTS3002C, BTS3012A, BTS3006A, BTS3012, BTS3006C, BTS3002E, BTS3012AE, BTS3012_II, DBS3900_GSM, BTS3900_GSM, BTS3900A_GSM, DBS3036, BTS3036, BTS3036A, BTS3900B_GSM, Enumeratio BTS3900E_GSM, n Type BTS3900L_GSM
BTS30, BTS312, BTS3001C, BTS3001CP, BTS3002C, BTS3012A, BTS3006A, BTS3012, BTS3006C, BTS3002E, BTS3012AE, BTS3012_II, DBS3900_GSM, BTS3900_GSM, BTS3900A_GSM, DBS3036, BTS3036, BTS3036A, BTS3900B_GSM, BTS3900E_GSM, BTS3900L_GSM
None
None
None
BTS3900B_GSM (BTS3900B GSM), BTS3900E_GSM Enumeratio (BTS3900E BTS3900B_GSM, n Type GSM) BTS3900E_GSM
None
None
None
BTS3012(BTS30 12), BTS3006C(BTS3 006C), BTS3002E(BTS3 002E), BTS3012AE(BTS 3012AE), BTS3012_II(BTS 3012_II), DBS3900_GSM( DBS3900 GSM), BTS3900_GSM( BTS3900 GSM), BTS3900A_GSM (BTS3900A GSM), DBS3036(DBS30 36), BTS3036(BTS30 36), BTS3036A(BTS3 036A), BTS3900L_GSM( BTS3900L GSM), BTS3900B_GSM (BTS3900B GSM), BTS3900E_GSM Enumeratio (BTS3900E n Type GSM)
BTS3012, BTS3006C, BTS3002E, BTS3012AE, BTS3012_II, DBS3900_GSM, BTS3900_GSM, BTS3900A_GSM, DBS3036, BTS3036, BTS3036A, BTS3900L_GSM, BTS3900B_GSM, BTS3900E_GSM
None
None
None
Interval Type
0~1000000
0~1000000
BIULOOP(BIU Loopback Test), TRXSELFTEST( Enumeratio TRX Self BIULOOP, n Type Loopback Test) TRXSELFTEST
None
None
None
NO_BAT(No Storage Battery), INSIDE_BAT(Insi de Storage Battery), OUTSIDE_BAT( NO_BAT, Enumeratio Outside Storage INSIDE_BAT, n Type Battery) OUTSIDE_BAT
None
NO_BAT
NO_BAT
Interval Type
10~255
10~255
60
60
YES, NO
None
NO
NO
Interval Type
2~65534
2~65534
None
None
None
Interval Type
2~65534
2~65534
None
None
None
Interval Type
1000~3000
1000~3000
ms
1000
1000
OFF, ON
None
None
None
Interval Type
0~200000
0~200000
kbit/s
Interval Type
0~200000
0~200000
kbit/s
Interval Type
0~100
0~100
per cent
20
20
Interval Type
0~100
0~100
per cent
15
15
Interval Type
0~200000
0~200000
kbit/s
Interval Type
0~100
0~100
per cent
Interval Type
0~200000
0~200000
kbit/s
Interval Type
0~100
0~100
per cent
Interval Type
0~100
0~100
per cent
Interval Type
0~200000
0~200000
kbit/s
Interval Type
100~1000
100~1000
per cent
120
120
FULL_DUPLEX(F ull Duplex), Enumeratio HALF_DUPLEX( FULL_DUPLEX, n Type Half Duplex) HALF_DUPLEX
None
None
None
Interval Type
0~100
0~100
per cent
25
25
Interval Type
20~100
20~100
per cent
80
80
BYIDX(By Cell Index), Enumeratio BYNAME(By Cell n Type Name) BYIDX, BYNAME
None
None
None
C31NOTUSE(Not Use c31 standard), C31STANDARD( Enumeratio Use c31 C31NOTUSE, n Type standard) C31STANDARD
None
C31STANDARD C31STANDARD
Interval Type
0~1
0~1
None
String Type None
1~200 characters
None
None
None
Interval Type
0~8
0~8
None
None
None
NO, YES
None
None
None
NO, YES
None
YES
If this parameter is set to NO, the average call drop rate decreases. This setting is applicable in suburbs or urban areas with poor coverage. Call reestablishment, however, may take a long time. Therefore, the subscriber may hang up the phone before the call is reestablished. Generally, the recommended value is YES.
0~4095
0~4095
None
None
None
NO, YES
None
YES
YES
OFF, ON
None
None
None
GSM900(GSM90 0), DCS1800(DCS18 00), GSM850(GSM85 0), Enumeratio PCS1900(PCS19 GSM900, DCS1800, n Type 00) GSM850, PCS1900 None
GSM900
GSM900
NULL(NULL), IPLGCPORT(IP Logic Port), Enumeratio RSCGRP(Resour NULL, IPLGCPORT, n Type ce Group) RSCGRP None ETHER, IPLOGICPORT, Enumeratio TRUNK, PPP, n Type MP ETHER, IPLOGICPORT, TRUNK, PPP, MP
NULL
NULL
None
None
None
Enumeratio ETHPORT, n Type TRUNK
ETHPORT, TRUNK None
None
None
NO, YES
None
NO
The CBA function applies to special scenarios. If this parameter is set to YES and "Cell Bar Qualify" is set to no, only handovers are allowed in a cell, and direct access of an MS is not allowed. This condition applies to a dual-network coverage cell. For a common cell, this parameter should be set to NO.
Interval Type
0~3
0~3
None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
Interval Type
0~63
0~63
None
30
30
Interval Type
0~65535
0~65535
None
None
None
Interval Type
5~180
5~180
15
15
NO, YES
None
NO
NO
4500~32767
4500~32767
byte
4500
4500
Interval Type
1~5
1~5
Interval Type
0~31
ms
Interval Type
0~31
ms
Interval Type
0~65535
0~65535
None
86 None
DISABLE(Disable d), Enumeratio ENABLE(Enabled n Type ) DISABLE, ENABLE None
None
None
Interval Type
0~255
0~255
15
15
Interval Type
20~100
20~100
per cent
80
80
Interval Type
0~63
0~63
None
46
46
Enumeratio n Type 10, 100, 1000
10, 100, 1000
ms
1000
1000
Interval Type
0~100
0~100
per cent
90
90
Interval Type
0~7
0~42, step: 6
dB
Interval Type
0~7
0~36, Positive infinity, step: 6
dB
Interval Type
0~1023
0~1023
None
None
None
Enumeratio AUTO(Auto), n Type MANU(Manu)
AUTO, MANU
None
None
None
Interval Type
0~1023
0~1023
None
None
None
AUTO, MANU
None
None
None
Interval Type
0~50
0~50
None
Interval Type
0~7
0~42, step: 6
dB
Interval Type
0~7
dB
Permit(Permit Cell Access), Enumeratio NoPermit(Prohibit n Type Cell Access) Permit, NoPermit
None
Permit
Permit
OUTDOOR_CEL L(Outdoor Cell), Enumeratio INDOOR_CELL(I OUTDOOR_CELL, n Type ndoor Cell) INDOOR_CELL
None
OUTDOOR_CE LL OUTDOOR_CELL
Interval Type
240~289
24.0~28.9 (step: 0.1) V
283
283
Interval Type
433~576
43.3~57.6 (step: 0.1) V
565
565
Interval Type
240~289
24.0~28.9 (step: 0.1) V
268
268
Interval Type
432~575
43.2~57.5 (step: 0.1) V
535
535
Interval Type
0~2047
0~2047
None
None
None
Interval Type
0~2047
0~2047
None
None
None
Interval Type
0~2047
0~2047
None
None
None
Interval Type
0~2047,65535
0~2047, 65535
None
None
None
0~2047
0~2047
None
None
None
0~2047
0~2047
None
None
None
String Type None
1~400 characters
None
None
None
BYNAME(By Enumeratio name), BYID(By n Type index) BYNAME, BYID BYNAME(By Enumeratio Name), BYID(By n Type Index) BYNAME, BYID
None
None
None
None
None
None
None
None
None
Enumeratio Inner(Inner), n Type Extra(Extra)
Inner, Extra
None
None
None
Enumeratio n Type 1, 2, 3, 4
1, 2, 3, 4
None
String Type None
0~5000 characters
None
None
None
NO, YES
None
NO
NO
Interval Type
0~255
0~255
None
80
80
String Type None
1~64 characters
None
None
None
String Type None
1~64 characters
None
None
None
String Type None
1~64 characters
None
None
None
String Type None
0~5000 characters
None
None
None
OP1(Operator 1), OP2(Operator 2), OP3(Operator 3), OP4(Operator 4), Enumeratio NONE(Not OP1, OP2, OP3, n Type Shared) OP4, NONE
None
255
255
Interval Type
0~63
0~63
dB
30
30
Interval Type
0~63
0~63
None
Interval Type
1~20
1~20
None
NO, YES
None
YES
YES
Interval Type
350~553
35.0~55.3 (step: 0.1) V
430
430
2G(Preference for 2G Cell), Enumeratio 3G(Preference n Type for 3G Cell)
2G, 3G
None
2G
2G
Interval Type
0~100
0~100
per cent
30
30
COMMON(COM MON), MULTIPATH(MU LTIPATH), INDOOR(INDOO R), Enumeratio HIGHWAY(HIGH n Type WAY)
COMMON, MULTIPATH, INDOOR, HIGHWAY
None
COMMON
COMMON
NO, YES
None
NO
NO
Interval Type
400~790
degree 40.0~79.0 (step: 0.1) Celsius
500
500
Interval Type
-190~50
degree -19.0~5.0 (step: 0.1) Celsius
-100
-100
Interval Type
0~1000
800
800
Interval Type
-500~0
-200
-200
NO, YES
None
NO
NO
Interval Type
0~63
0~63
dB
20
20
Interval Type
0~63
0~63
None
Interval Type
20~90
20~90
per cent
80
80
String Type None
0~200 characters
None
None
None
NO, YES
None
None
None
NULL(NULL), IPLGCPORT(IP Logic Port), Enumeratio RSCGRP(Resour NULL, IPLGCPORT, n Type ce Group) RSCGRP None
NULL
NULL
AUTO(AUTOPLA N), Enumeratio NORMAL(NORM n Type AL) AUTO, NORMAL
None
None
None
ENABLE(Enable) , Enumeratio DISABLE(Disable n Type ) DISABLE, ENABLE None
None
None
NO, YES
None
None
None
NO, YES
None
None
None
Password Type
None
1~32 characters
None
None
None
G_15, G_16, G_17, G_18, G_19, G_20, G_21, G_22, G_23, G_24, G_25, G_26, G_27, G_28, Enumeratio G_29, G_30, n Type G_31 G_0~0 G_1~1 G_2~2 G_3~3 G_4~4 G_5~5 G_6~6 G_7~7 G_8~8 G_9~9 G_10~10 G_11~11 G_12~12 G_13~13 G_14~14 G_15~15 G_16~16 G_17~17 G_18~18 G_19~19 G_20~20 G_21~21 G_22~22 G_23~23 G_24~24 G_25~25 G_26~26 G_27~27 G_28~28 G_29~29 G_30~30 G_31
G_15, G_16, G_17, G_18, G_19, G_20, G_21, G_22, G_23, G_24, G_25, G_26, G_27, G_28, G_29, G_30, G_31 None
None
None
Bit Field Type
G_0, G_1, G_2, G_3, G_4, G_5, G_6, G_7, G_8, G_9, G_10, G_11, G_12, G_13, G_14, G_15, G_16, G_17, G_18, G_19, G_20, G_21, G_22, G_23, G_24, G_25, G_26, G_27, G_28, G_29, G_30, G_31 None
None
None
Interval Type
20~90
20~90
None
80
80
Interval Type
20~90
20~90
None
80
80
OFF, ON
None
None
None
String Type None
1~32 characters
None
None
None
Interval Type
0~2
0~2
None
None
None
Interval Type
30~100
30~100
None
90
90
Interval Type
30~100
30~100
None
90
90
Interval Type
30~100
30~100
None
90
90
QUICK_HO_NCE LL_TYPE_A(QUI CK_HO_NCELL_ TYPE_A), QUICK_HO_NCE LL_TYPE_B(QUI Enumeratio CK_HO_NCELL_ n Type TYPE_B)
QUICK_HO_NCELL _TYPE_A, QUICK_HO_NCELL _TYPE_B None
QUICK_HO_NC QUICK_HO_NCELL_ ELL_TYPE_A TYPE_A
CHAINTORING( ChainToRing), COMBINECHAIN Enumeratio S(CombineChain CHAINTORING, n Type s) COMBINECHAINS
None
None
None
CAPABILITY(Cap ability preferred), QUALITY(Quality preferred), PSRELATIVELY( PS relatively preferred), PSABSOLUTELY Enumeratio (PS absolutely n Type preferred)
CAPABILITY, QUALITY, PSRELATIVELY, PSABSOLUTELY
None
CAPABILITY
CAPABILITY
Interval Type
0~100
0~100
per cent
OFF, ON
None
OFF
OFF
Interval Type
0~100
0~100
per cent
100
100
Interval Type
0~65535
0~65535
None
None
None
NO, YES
None
YES
YES
NO, YES
None
NO
NO
Interval Type
1~64
1~64
10
10
Interval Type
1~5
1~5
None
NO, YES
None
YES
YES
None
MODE2
MODE2
None
MODE2
MODE2
0~511
0~511
None
None
None
0~511
0~511
None
None
None
Interval Type
5~20
5~20
None
10
10
Interval Type
5~20
5~20
None
10
10
NO, YES
None
NO
NO
NO, YES
None
NO
NO
ALDER32(ALDE Enumeratio R32), n Type CRC32(CRC32) ALDER32, CRC32
None
CRC32
CRC32
Enumeratio SBFD, ARP, n Type MBFD Interval Type
SBFD, ARP, MBFD None
None
None
0~12
0~12
None
None
1~7
1~7
None
None
None
0~169
0~169
None
None
None
Interval Type
0~7
0~7
None
None
None
TRXRFSELFLOO P(TRX RF Self Loopback Test), BIULOOP(BIU Loopback Test), BTSSPEECHLO OP(BTS Speech Loopback Test), TRXSPEECHLO Enumeratio OP(TRX Speech n Type Loopback Test)
TRXRFSELFLOOP, BIULOOP, BTSSPEECHLOOP, TRXSPEECHLOOP None
None
None
FULLTCH(FULLT CH), Enumeratio HALFTCH(HALF FULLTCH, n Type TCH) HALFTCH
None
None
None
NO, YES
None
YES
YES
NO, YES
None
YES
YES
NO, YES
None
YES
YES
NO, YES
None
YES
YES
NO, YES
None
YES
YES
NO, YES
None
YES
YES
NOSENDING(For ce NO Sending), SYSTEMOPT(Sy stem Optimization), NOSENDING, Enumeratio SENDING(Force SYSTEMOPT, n Type Sending) SENDING
None
SYSTEMOPT
SYSTEMOPT
NO, YES
None
NO
NO
OFF, ON
None
OFF
OFF
Interval Type
10~800
10~800
None
100
100
Interval Type
10~800
10~800
None
200
200
Interval Type
100~600000
100~600000
ms
1000
1000
TCHFR(TCH Full Rate), TCHHR(TCH Half Rate), SDCCH8(SDCC H8), MBCCH(Main BCCH), CBCCH(Combine d BCCH), BCH(BCH), BCCH_CBCH(B CCH+CBCH), SDCCH_CBCH( SDCCH+CBCH), PBCCH_PDTCH( PBCCH+PDTCH) , PCCCH_PDTCH( PCCCH+PDTCH) , PDTCH(PDTCH), Enumeratio DPDCH(Dynamic n Type PDCH)
TCHFR, TCHHR, SDCCH8, MBCCH, CBCCH, BCH, BCCH_CBCH, SDCCH_CBCH, PBCCH_PDTCH, PCCCH_PDTCH, PDTCH, DPDCH None
TCHFR
TCHFR
Interval Type
0~65535
0~65535
None
None
None
Interval Type
0~65535
0~65535
None
None
None
Interval Type
0~65535
0~65535
None
None
None
Interval Type
0~65535
0~65535
None
None
None
Interval Type
0~160
0~160
frame
Interval Type
1~12
1~12, step: 5
min
OFF, ON
None
OFF
OFF
Interval Type
1~100
1~100
per cent
80
80
Interval Type
1~60
1~60
NO, YES
None
YES
YES
NO, YES
None
YES
YES
NOTSENDING(N ot sending), SENDINGPRO(s ending according to protocol), SENDING(uncon NOTSENDING, Enumeratio ditionally SENDINGPRO, n Type sending) SENDING
None
NOTSENDING
NOTSENDING
NOTSENDING(N ot sending), SENDINGPRO(s ending according to protocol), SENDING(uncon NOTSENDING, Enumeratio ditionally SENDINGPRO, n Type sending) SENDING
None
NOTSENDING
NOTSENDING
NO, YES
None
YES
YES
NO, YES
None
YES
YES
1~1562
64~100000, step:64 kbit/s
None
None
Interval Type
0~22
0~22
dB
22
22
Interval Type
0~27
0~27
None
None
None
Interval Type
0~11
0~11
None
None
None
UNSUPPORT(No t Support), Enumeratio SUPPORT(Supp UNSUPPORT, n Type ort) SUPPORT
None
UNSUPPORT
None
Enumeratio NO(No), n Type YES(Yes) ERR_PFM_1E6( RECOVERY:1E6), ERR_PFM_5E6( RECOVERY:5E6), ERR_PFM_1E5( RECOVERY:1E5), ERR_PFM_5E5( RECOVERY:5E5), ERR_PFM_1E4( RECOVERY:1E4), ERR_PFM_5E4( RECOVERY:5E4), ERR_PFM_1E3( Enumeratio RECOVERY:1En Type 3)
NO, YES
None
NO
NO
ERR_PFM_1E6, ERR_PFM_5E6, ERR_PFM_1E5, ERR_PFM_5E5, ERR_PFM_1E4, ERR_PFM_5E4, ERR_PFM_1E3
None
None
ERR_PFM_5E6
INCLK(Internal Clock), BSCCLK(Trace BSC Clock), EXCLK(External Synchro Clock), IPCLK(IP Clock), TRANSCLK(Trac e Trans Clock), GPSCLK(Trace GPS Clock), UMCLK(Um Clock), Enumeratio PEERCLK(PEER n Type Clock)
INCLK, BSCCLK, EXCLK, IPCLK, TRANSCLK, GPSCLK, UMCLK, PEERCLK
None
None
None
HW_DEFINED(H uawei Userdefined), Enumeratio PTP(PTP n Type Protocol) HW_DEFINED, PTP None
PTP
PTP
Enumeratio n Type GCUa, GCGa
GCUa, GCGa
None
GCUa
None
INT_CLK(Internal Clock), TRCBSC_CLK(Tr ace BSC Clock), EXTSYN_CLK(E xternal Sync clock), IP_TIME(IP Clock), IP_TRANSFER(T race Transport Clock), TRCGPS_CLK(T race GPS Clock), UM_CLK(Um Clock), Enumeratio PEER_CLK(Peer n Type Clock)
INT_CLK, TRCBSC_CLK, EXTSYN_CLK, IP_TIME, IP_TRANSFER, TRCGPS_CLK, UM_CLK, PEER_CLK
None
None
None
Interval Type
0~255
0~255
255
255
Bit Field Type
cleared, uncleared
cleared, uncleared
None
None
None
Interval Type
0~255
0~255
255
255
String Type None
1~200 characters
None
None
None
String Type None
0~128 characters
None
None
None
Interval Type
0~19
0~19
None
None
None
Interval Type
1~3
1~3
None
None
None
Interval Type
0~62
0~62
None
None
None
Interval Type
0~62
0~62
None
Interval Type
0~62
0~62
None
None
None
0~62
0~62
None
None
None
0 None
None
None
Interval Type
1~60
1~60
30
30
Interval Type
0~4095
0~4095
None
None
None
Interval Type
0~4095
0~4095
None
None
None
0~31
0~31
None
None
None
0~3
0~3
None
None
None
NONE(None), Enumeratio AINTFBLOCK(AI NONE, n Type nterf Block) AINTFBLOCK
None
NONE
NONE
Interval Type
1~150000
1~150000
None
None
None
BTS3002C, Enumeratio BTS3012A, n Type BTS3006A
BTS3002C, BTS3012A, BTS3006A
None
None
None
BTS3012(BTS30 12), BTS3012AE(BTS 3012AE), BTS3006C(BTS3 006C), BTS3012_II(BTS 3012 II), BTS3002E(BTS3 002E), DBS3900_GSM( DBS3900 GSM), BTS3900_GSM( BTS3900 GSM), BTS3900A_GSM (BTS3900A GSM), DBS3036(DBS30 36), BTS3036(BTS30 36), BTS3036A(BTS3 036A), BTS3900_GSM_ 6RFC(BTS3900 GSM 6RFC), BTS3900A_GSM _6RFC(BTS3900 A GSM 6RFC), BTS3036_6RFC( BTS3036 6RFC), BTS3036A_6RF Enumeratio C(BTS3036A n Type 6RFC)
BTS3012, BTS3012AE, BTS3006C, BTS3012_II, BTS3002E, DBS3900_GSM, BTS3900_GSM, BTS3900A_GSM, DBS3036, BTS3036, BTS3036A, BTS3900_GSM_6R FC, BTS3900A_GSM_6 RFC, BTS3036_6RFC, BTS3036A_6RFC None
None
None
Interval Type
10000~50000
10000~50000
None
None
None
Interval Type
0~250
0~250
None
0 None
Interval Type
0~250
0~250
None
0 None
NO, YES
None
YES
YES
Interval Type
1~1023
1~1023
None
None
None
INACTIVE(Inactiv Enumeratio e), n Type ACTIVE(Active) INACTIVE, ACTIVE None
INACTIVE
INACTIVE
Enumeratio BYSITE(By Site), n Type BYCELL(By Cell) BYSITE, BYCELL
None
None
None
Interval Type
0~100
0~10, step:0.1
dB
45
45
Bit Field Type
L0_FORBID, L1_FORBID, L2_FORBID, L3_FORBID, L4_FORBID, L5_FORBID, L6_FORBID, L7_FORBID, L8_FORBID, L9_FORBID LOWERCASE, UPPERCASE, DIGIT, SPECIALCHARA CTER
L0_FORBID, L1_FORBID, L2_FORBID, L3_FORBID, L4_FORBID, L5_FORBID, L6_FORBID, L7_FORBID, L8_FORBID, L9_FORBID
None
L0_FORBID0&L1_FORBID0&L2_FORBID0&L3_FORBID0&L4_FORBID0&L5_FORBID0&L6_FORBID0&L7_FORBID0&L8_FORBID0&L9_FORBID-0
L0_FORBID0&L1_FORBID0&L2_FORBID0&L3_FORBID0&L4_FORBID0&L5_FORBID0&L6_FORBID0&L7_FORBID0&L8_FORBID0&L9_FORBID-0
Bit Field Type Interval Type
LOWERCASE, UPPERCASE, DIGIT, SPECIALCHARACT ER None
None
None
1~100
1~100
None
100
100
NO, YES
None
NO
NO
None
None
None
Interval Type
10~150
10~150
ms
15 IP/HDLC:15
Interval Type
10~150
10~150
ms
15 IP/HDLC:15
Interval Type
10~150
10~150
ms
15 IP/HDLC:15
Interval Type
10~150
10~150
ms
15 IP/HDLC:15
Interval Type
10~150
10~150
ms
25
25
Interval Type
10~150
10~150
ms
25
25
Interval Type
10~150
10~150
ms
25 IP/HDLC:25
Interval Type
10~150
10~150
ms
25 IP/HDLC:25
Interval Type
10~150
10~150
ms
25 IP/HDLC:25
Interval Type
10~150
10~150
ms
25 IP/HDLC:25
Interval Type
10~150
10~150
ms
50
50
Interval Type
10~150
10~150
ms
50
50
NO, YES
None
NO
NO
Interval Type
0~335
0~335
None
None
None
NO, YES
None
NO
NO
ALL(ALL Type), Enumeratio ONLY_SSL(Only n Type SSL Connection) ALL, ONLY_SSL
None
None
None
INNER(Internal RNC), Enumeratio EXTERNAL(Exter n Type nal RNC) INNER, EXTERNAL None
None
None
Interval Type
0~60
0~60
Interval Type
1~200
1~200
NO, YES
None
NO
NO
Interval Type
1~28
1~28
None
Interval Type
1~60
1~60
None
None
NO, YES
None
NO
NO
0~7
0~7
None
None
None
OFF(Off), ON(On), Enumeratio NOTSUPPORT( n Type Not Support)
OFF, ON, NOTSUPPORT
None
NOTSUPPORT NOTSUPPORT
0dB, 2dB, 4dB, Enumeratio 6dB, 8dB, 10dB, n Type 12dB, 14dB
0dB, 2dB, 4dB, 6dB, 8dB, 10dB, 12dB, 14dB dB
6dB
6dB
String Type None
0~200 characters
None
None
None
None
None
Interval Type
1~255
10~2550, step: 10
ms
10
10
Interval Type
1~255
1~255
None
Interval Type
0~63
0~126, step: 2
dB
Interval Type
1~255
1~255
None
255
255
UNAVAILABLE(U NAVAILABLE), Enumeratio AVAILABLE(AVA UNAVAILABLE, n Type ILABLE) AVAILABLE
None
UNAVAILABLE
UNAVAILABLE
Bit Field Type
VOICEINF, MR, CALLAPPENDIN VOICEINF, MR, F, CALLAPPENDINF, CALLINNERINF CALLINNERINF
None
None
None
Interval Type
0~100
0~100
None
Enumeratio OFF(Not Output), n Type ON(Output) OFF, ON
None
OFF
OFF
Bit Field Type
RESINSUFF, UMABNORM, TRAFFREJECT, MSCREL, MSCDISCON, BADQUALITY
RESINSUFF, UMABNORM, TRAFFREJECT, MSCREL, MSCDISCON, BADQUALITY
None
RESINSUFF,UM ABNORM,TRAF RESINSUFF,UMABN FREJECT,MSC ORM,TRAFFREJECT, REL MSCREL
Interval Type
0~100
0~100
per cent
100
100
BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, Enumeratio AF33, AF41, n Type AF42, AF43, EF
BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF
None
None
When the interface type is Abis, transmission type is IP, the parameter is AF43; When the interface type is A, Ater or Iur-g, the parameter is AF43.
Interval Type
0~7
0~7
None
None
When the interface type is Abis and transmission type is HDLC, the parameter is 1.
Interval Type
0~100
0~100
per cent
100
100
Interval Type
0~7
0~7
None
None
OFF
OFF
Enumeratio OFF(Not Output), n Type ON(Output) OFF, ON OFF(Not Output), MRHOFAIL(Prefe rentially Output MR of HO Failure), MRHOLATEST(P referentially Enumeratio Output MR of OFF, MRHOFAIL, n Type Latest HO) MRHOLATEST
None
OFF
OFF
None
OFF
OFF
COMMONUSRM( Common User Mode), Enumeratio SPECUSRM(Spe COMMONUSRM, n Type cified User Mode) SPECUSRM
None
None
None
ABNORMREC(O utput Abnormal Records in BSC), ALLBSCREC(Out put All Records in BSC), ALLCELLREC(O ABNORMREC, Enumeratio utput All Records ALLBSCREC, n Type in Cells) ALLCELLREC
None
ABNORMREC
ABNORMREC
OFF, ON
None
None
ON
OFF(Not Output), ALL(Output All), AINTF(Output A Interface Signaling), ABISINTF(Output Enumeratio Abis Interface OFF, ALL, AINTF, n Type Signaling) ABISINTF
None
OFF
OFF
Interval Type
30~100
30~100
per cent
90
90
Bit Field Type
LU, SMS, CALL
LU, SMS, CALL
None
CALL
CALL
Interval Type
0~100
0~100
per cent
50
50
None
OFF
OFF
None
None
When the interface type is Abis, transmission type is IP, the parameter is EF; When the interface type is A, Ater or Iur-g, the parameter is EF.
Interval Type
0~7
0~7
None
None
Interval Type
0~100
0~100
per cent
50
50
Interval Type
0~7
0~7
None
Enumeratio ON(ON), n Type OFF(OFF)
ON, OFF
None
None
ON
Interval Type
40000~50000
40000~50000
ms
45000
45000
Interval Type
5000~150000
5000~150000
ms
30000
30000
Interval Type
1000~2000
1000~2000
ms
1300
1300
Interval Type
400~600
400~600
ms
500
500
Interval Type
7500~9500
7500~9500
ms
8200
8200
Interval Type
80~120
80~120
ms
100
100
Interval Type
3000~6000
3000~6000
ms
5000
5000
Interval Type
500~2000
500~2000
ms
1500
1500
Interval Type
1~100
1~100
ms
100
100
Interval Type
30~100
30~100
per cent
95
95
30~100
30~100
per cent
95
85
1~16777215
1~16777215
None
None
None
4BURST(4Burst), Enumeratio RLC/MAC(RLC/M n Type AC) 4BURST, RLC/MAC None NO(Cancel Control Flag), Enumeratio YES(Set Control n Type Flag)
4BURST
4BURST
YES, NO
None
None
None
Interval Type
0~62
0~62
None
None
None
Interval Type
0~5
0~5
None
None
None
Interval Type
0~23
0~23
None
None
None
Interval Type
0~254
0~254
None
None
None
Interval Type
0,2,4,8,10,12,14, 0, 2, 4, 8, 10, 12, 14, 16,18,20,22,24,2 16, 18, 20, 22, 24, 6 26 None
None
None
Interval Type
0~27,255
0~27, 255
None
None
None
Interval Type
0~11,255
0~11, 255
None
None
None
ON, OFF
None
None
OFF
NO, YES
None
NO
NO
0~99
0~99
None
None
None
10~255
10~255
min
30 None
String Type None
1~63 character
None
None
None
Interval Type
1~31
TCH:480~14880, step:480; SDCCH:470~14570, step:470 ms
Interval Type
1~31
Bit Field Type
NT14_5K~0 NT12K~1 NT6K~2 T14_4K~3 T9_6K~4 T4_8K~5 T2_4K~6 T1_2K~7 T600_BITS~8 T1200_75
NT14_5K, NT12K, NT6K, T14_4K, T9_6K, T4_8K, T2_4K, T1_2K, T600_BITS, T1200_75
None
NT14_5K0&NT12K1&NT6K1&T14_4K0&T9_6K1&T4_8K1&T2_4K1&T1_2K0&T600_BITS0&T1200_75-0
NT14_5K-0&NT12K1&NT6K-1&T14_4K0&T9_6K-1&T4_8K1&T2_4K-1&T1_2K0&T600_BITS0&T1200_75-0
NOLIMIT(No Enumeratio Limit), n Type LIMIT(Limit) Compound Type YEAR, MONTH, DAY
NOLIMIT, LIMIT 2000-1-1~2099-1231
None
NOLIMIT
NOLIMIT
None
None
None
Interval Type
1~12
1~12
None
None
None
Interval Type
0~31
0~31
None
None
None
Interval Type
0~30
0~30
degree Celsius
Enumeratio Inner(Inner), n Type Extra(Extra)
Inner, Extra
None
None
If the coverage area in the underlaid subcell is large and tight frequency reuse is used in the overlaid subcell, the recommended value is Inner. If the coverage areas in the overlaid and underlaid subcells are similar and tight frequency reuse is used on the BCCH, the recommended value is Extra.
Interval Type
0~2047
0~2047
None
None
None
String Type None
1~64 characters
None
None
None
None
None
None
Interval Type
0~255
0~255
None
None
None
Interval Type
0~255
0~255
None
None
None
Interval Type
0~255
0~255
None
None
None
Interval Type
0~255
0~255
None
None
None
Interval Type
350~556
35.0~55.6 (step: 0.1) V
None
If "Power System Type" is "SC48200", the recommended value is "470". For Power System Type, the recommended value is "450".
Interval Type
580~600
58.0~60.0 (step: 0.1) V
580
580
Interval Type
433~555
43.3~55.5 (step: 0.1) V
450
450
Interval Type
580~600
58.0~60.0 (step: 0.1) V
580
580
Interval Type
0~32
0~32
None
Interval Type
500~60000
500~60000
ms
1000
1000
Interval Type
0~186
0~186
None
None
None
String Type None
1~110 characters
None
None
None
INACTIVE
INACTIVE
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
Interval Type
1~1000
1~1000
None
None
None
Enumeratio n Type BSC, BTS
BSC, BTS
None
None
None
Enumeratio BTS, BSC, DXX, BTS, BSC, DXX, n Type OTHER OTHER
None
None
None
Interval Type
0~27
0~27
None
None
None
Interval Type
0~11
{0~11}
None
None
None
Interval Type
0~7
0~7
None
None
None
Interval Type
0~3071
0~3071
None
None
None
Interval Type
0~255
0~255
None
Interval Type
3~10
3~10
None
OFF, ON
None
None
OFF
String Type None
0~50 characters
None
None
None
Interval Type
0~35
0~35
None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
Enumeratio LOGIC_IP(Logica n Type l IP Address) LOGIC_IP
None
None
None
Interval Type
0~16383
0~16383
None
None
None
Interval Type
0~23
0~23
None
None
None
Interval Type
0~254
0~254
None
None
None
NO(Not Default DPC), Enumeratio YES(Default n Type DPC)
NO, YES
None
YES
YES
DEFAULTPORT( Default 21 Port), Enumeratio CUSTOMPORT( DEFAULTPORT, n Type Custom Port) CUSTOMPORT
None
None
DEFAULTPORT
Interval Type
1~60
1~60
min
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
Interval Type
0~63
0~63
None
None
None
DISABLE(DISAB LE), Enumeratio ENABLE(ENABL n Type E) DISABLE, ENABLE None
DISABLE
DISABLE
NO, YES
None
NO
NO
MON_1(No.1), MON_2(No.2), MON_3(No.3), MON_4(No.4), MON_5(No.5), MON_6(No.6), MON_7(No.7), MON_8(No.8), MON_9(No.9), MON_10(No.10), MON_11(No.11), MON_12(No.12), MON_13(No.13), MON_14(No.14), MON_15(No.15), MON_16(No.16), MON_17(No.17), MON_18(No.18), MON_19(No.19), MON_20(No.20), MON_21(No.21), MON_22(No.22), MON_23(No.23), MON_24(No.24), MON_25(No.25), MON_26(No.26), MON_27(No.27), MON_28(No.28), MON_29(No.29), Enumeratio MON_30(No.30), n Type MON_31(No.31) MON_1~MON_31 SUN(Sunday), MON(Monday), TUE(Tuesday), WED(Wednesda y), THU(Thursday), SUN, MON, TUE, Enumeratio FRI(Friday), WED, THU, FRI, n Type SAT(Saturday) SAT
None
None
None
None
None
None
String Type None
1~128 characters
None
None
None
String Type None
1~256 characters
None
None
None
NO, YES
None
NO
NO
NO, YES
None
YES
YES
NO, YES
None
NO
NO
Interval Type
0~15
0~15
NO, YES
None
None
None
Interval Type
4~32
0.5~4, step: 1/8
bit
Interval Type
4~32
0.5~4, step: 1/8
bit
Interval Type
4~32
0.5~4, step: 1/8
bit
Enumeratio N0(No), n Type YES(Yes)
N0, YES
None
N0
N0
Interval Type
0~255
TCH:480~122400, step:480; SDCCH:470~11985 0, step:470 ms
Interval Type
1~30
1~30
dB
14
14
Interval Type
1~30
1~30
dB
14
14
Interval Type
1~30
1~30
dB
16
16
Interval Type
1~30
1~30
dB
16
16
Interval Type
16~1007
16~1007
None
None
None
Interval Type
1~255
1~255
None
None
UNSUPPORT
None
Interval Type
0~63
0~63
dB
The recommended value is 20 when HUAWEI I Handover is used; The recommended value is 15 when HUAWEI II Handover 20 is used.
Interval Type
1~10
1~10
None
Interval Type
1~30
1~30
dB
16
16
Interval Type
1~30
1~30
dB
16
16
Interval Type
0~127
0~127
None
Interval Type
1~30
1~30
dB
18
18
Interval Type
1~30
1~30
dB
18
18
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
15
15
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
Interval Type
0~63
0~63
dB
35
35
Interval Type
0~70
0~70
None
40
40
Interval Type
1~100
1~100
None
90
90
Interval Type
1~20
ms
Interval Type
2~255
2~255
None
Interval Type
2~255
2~255
None
The recommended value is 8 when DTX is disabled. The recommended value is 14 when DTX 8 is enabled.
Interval Type
2~255
2~255
None
60
60
Interval Type
2~255
2~255
None
Interval Type
1~30
1~30
dB
Interval Type
1~30
1~30
dB
Interval Type
1~100
1~100
None
100
100
Interval Type
0~3
0~3
None
Interval Type
0~7
0~7
None
Interval Type
0~7
0~7
None
Interval Type
1~20
ms
Interval Type
0~7
0~7
None
Interval Type
0~63
0~63
dB
10
10
Interval Type
0~70
0~70
None
55
55
Interval Type
0~70
0~70
None
60
60
Interval Type
0~70
0~70
None
55
55
Interval Type
0~10
0~10
None
Interval Type
0~19
ms
Interval Type
0~63
0~63
dB
20
20
Interval Type
0~63
0~63
dB
20
20
Interval Type
1~20
ms
Interval Type
0~10
0~10
None
Interval Type
0~19
ms
Interval Type
1~20
ms
Interval Type
0~100
0~100
None
Interval Type
0~100
0~100
None
55
55
Interval Type
0~63
0~63
dB
45
45
Interval Type
0~63
0~63
dB
28
28
Interval Type
0~300
0~300
ms
140
140
Interval Type
0~255
0~255
Interval Type
1~255
1~255
None
Interval Type
0~63
0~63
dB
12
12
Interval Type
0~63
0~63
dB
17
17
Interval Type
0~63
0~63
dB
25
25
Interval Type
0~63
0~63
dB
23
23
Interval Type
0~63
0~63
dB
31
31
Interval Type
0~63
0~63
dB
63
63
Interval Type
0~63
0~63
dB
12
12
Interval Type
0~63
0~63
dB
18
18
Interval Type
0~255
0~255
None
None
None
Interval Type
0~255
0~255
None
None
None
Interval Type
0~255
0~255
None
None
None
CS1(CS1), CS2(CS2), Enumeratio CS3(CS3), n Type CS4(CS4)
CS1, CS2, CS3, CS4
None
CS2
CS2
MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), MCS4(MCS4), MCS5(MCS5), MCS6(MCS6), MCS7(MCS7), Enumeratio MCS8(MCS8), n Type MCS9(MCS9)
MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, MCS7, MCS8, MCS9
None
MCS6
MCS6
MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), MCS4(MCS4), MCS7(MCS7), MCS8(MCS8), DAS5(DAS5), DAS6(DAS6), DAS7(DAS7), DAS8(DAS8), DAS9(DAS9), DAS10(DAS10), Enumeratio DAS11(DAS11), n Type DAS12(DAS12)
MCS1, MCS2, MCS3, MCS4, MCS7, MCS8, DAS5, , DAS6, DAS7, DAS8, DAS9, DAS10, DAS11, DAS12
None
DAS6
DAS6
MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), MCS4(MCS4), MCS7(MCS7), MCS8(MCS8), DAS5(DAS5), DAS6(DAS6), DAS7(DAS7), DAS8(DAS8), DAS9(DAS9), DAS10(DAS10), DAS11(DAS11), DAS12(DAS12), Enumeratio UNFIXED(UNFIX n Type ED)
MCS1, MCS2, MCS3, MCS4, MCS7, MCS8, DAS5, , DAS6, DAS7, DAS8, DAS9, DAS10, DAS11, DAS12, UNFIXED
None
UNFIXED
UNFIXED
CS1(CS1), CS2(CS2), CS3(CS3), CS4(CS4), Enumeratio UNFIXED(UNFIX CS1, CS2, CS3, n Type ED) CS4, UNFIXED
None
UNFIXED
UNFIXED
MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), MCS4(MCS4), MCS5(MCS5), MCS6(MCS6), MCS7(MCS7), MCS8(MCS8), MCS9(MCS9), Enumeratio UNFIXED(UNFIX n Type ED)
MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, MCS7, MCS8, MCS9, UNFIXED
None
UNFIXED
UNFIXED
NO, YES
None
YES
YES
NO, YES
None
NO
NO
Interval Type
0~5000
0~5000
ms
2400
2400
Interval Type
0~64
0~64
per cent
10
10
Interval Type
0~64
0~64
per cent
Interval Type
0~64
0~64
per cent
Interval Type
0~64
0~64
per cent
Interval Type
0~64
0~64
per cent
Interval Type
0~64
0~64
per cent
CLOSE, OPEN
None
OPEN
None
Interval Type
0~255
0~25.5, step:0.1
dB
30
30
Interval Type
1~16777215
1~16383(BIT14), 1~65535(BIT16), 1~16777215(BIT24) None
None
None
String Type None
1~11 characters
None
None
None
Interval Type
0~31
0~31
None
None
None
Interval Type
0~31
0~31
None
Interval Type
0~31
0~31
None
None
None
STP(STP), A(A), Enumeratio IUR_G(IUR_G), n Type LB(LB) STP, A, IUR_G, LB
None
None
None
Interval Type
0~186
0~186
None
None
None
Interval Type
0~182
0~182
None
None
None
Interval Type
0~128
0~128
dB
72
72
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
0~1
0~1
None
Interval Type
10~150
10~150
ms
60 IP/HDLC:60
Interval Type
10~150
10~150
ms
60 IP/HDLC:60
Interval Type
10~150
10~150
ms
60 IP/HDLC:60
Interval Type
10~150
10~150
ms
60 IP/HDLC:60
Interval Type
10~150
10~150
ms
80
80
Interval Type
10~150
10~150
ms
80
80
Interval Type
1~60
1~60
min
10
10
Interval Type
0~12
0~12
Interval Type
2~10
2~10
dB
NO, YES
None
YES
YES
0(0), 1(1), 2(2), Enumeratio 4(4), 8(8), 16(16), 0, 1, 2, 4, 8, 16, 32, n Type 32(32), 64(64) 64
INACTIVE
INACTIVE
Interval Type
0~335
0~335
None
None
None
Interval Type
0~335
0~31(PEUa), 0~251(E1 of POUc), 0~335(T1 of POUc) None
None
None
Interval Type
0~63
0~63
None
48
48
Interval Type
0~63
0~63
None
Interval Type
0~63
0~63
None
None
None
Interval Type
0~63
0~63
None
Interval Type
1~3600
1~3600
180
180
Interval Type
0~27
0~27
None
None
None
Interval Type
0~21
0 to 21
None
None
None
Interval Type
0~27
0~27
None
None
None
0~21
0~21
None
None
None
0~21
0~21
None
None
None
Interval Type
0~30
0~30
15
15
YES, NO
None
NO
None
String Type None
1~128 characters
None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type Interval Type
None
0.0.0.0~255.255.255 .255 None
None
None
0~335 TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
0~335
None
None
None
Bit Field Type
None
None
None
Interval Type
0~100
0~100
per cent
85
85
NO, YES
None
YES
YES
Interval Type
1~12
1~12
None
None
None
1(1), 2(2), 3(3), 4(4), 5(5), 6(6), 7(7), 8(8), 9(9), Enumeratio 10(10), 11(11), n Type 12(12)
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
None
None
None
Interval Type
0~1
0, 1
None
None
None
Interval Type
0~1,255
0~1, 255
None
None
None
Interval Type
0~23
0~23
None
None
None
Interval Type
0~23,255
0~23, 255
None
None
None
Interval Type
0~53
0~53
None
None
None
Interval Type
0~53,255
0~53, 255
None
None
None
OFF, ON
None
OFF
OFF
Enumeratio FULL(FULL), n Type HALF(HALF)
FULL, HALF
None
FULL
FULL
Interval Type
0~12
0~12
None
None
Interval Type
1~24
1~24
None
None
Interval Type
0~59
0~59
min
None
None
Interval Type
0~59
0~59
None
None
Interval Type
10~80
10~80
None
20
20
Interval Type
0~63
0~63
None
20
20
Interval Type
0~2047
0~2047
None
None
None
Interval Type
0~2047
0~2047
None
None
None
Interval Type
0~15
0~15
None
None
None
Interval Type
10~3600
10~3600
20
20
LEVEL0(Preempt all dynamic TCHFs), LEVEL1(No preempt of CCHs), LEVEL2(No Enumeratio preempt of LEVEL0, LEVEL1, n Type service TCHF) LEVEL2
None
LEVEL0
LEVEL0
Interval Type
0~8
0~8
None
NO, YES
None
YES
YES
NOTSUPPORT( Not Support), DDIVERSITY(DD NOTSUPPORT, Enumeratio IVERSITY), DDIVERSITY, n Type DPBT(DPBT) DPBT
None
Interval Type
1~60
1~60
min
None
None
Interval Type
0~7
0~7
None
None
None
Interval Type
0~31
0~31
None
None
None
ACTIVE(ACTIVE TMU/MMU/IOMU /DOMU), ACTIVESTANDB Y(ACTIVE/STAN DBY TMU), SLAVE1(SLAVE TMU1/DOMU1), SLAVE2(SLAVE Enumeratio TMU2/DOMU2), n Type UTRP(UTRP)
ACTIVE, ACTIVESTANDBY, SLAVE1, SLAVE2, UTRP None
None
None
Interval Type
0~83
0~83
None
None
None
Interval Type
0~7
0~7
None
None
None
Interval Type
16~19
16~19
None
None
None
Enumeratio n Type E1(E1), T1(T1)
E1, T1
None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
Interval Type
0~49
0~49
dB
Interval Type
0~49
0~49
dB
30
30
NO, YES
None
YES
1. For a 900/1800 MHz Co-BCCH cell, it is recommended that this parameter be set to Yes. 2. For a 1800 MHz cell in the dual-band network, it is recommended that this parameter be set to Yes. For other cells in the dual-band network, it is recommended that this parameter be set to No. 3. When the A5/4-7 encryption algorithm is used, it is recommended that this parameter be set to Yes. 4. When frequencies of the extended frequency band exist on a 900 MHz cell, it is recommended that this parameter be set to Yes.
Interval Type
1~2147483646
1~2147483646
None
2147483646
2147483646
Compound Type
2000-1-1~2037-12year, month, date 31
None
None
None
Compound Type
2000-1-1~2037-12year, month, day 31
None
None
None
Compound Type Compound Type
2000-1-1~2037-12year, month, day 31 2000-01-01~2050year, month, day 12-31
None
None
None
None
None
None
Interval Type
1~31
1~31
None
None
Interval Type
1~255
1~255
Interval Type
1~255
1~255
Interval Type
0~11
0~11
None
10
10
NO, YES
None
NO
None
Interval Type
1~32
0.5~16, step:0.5
Interval Type
1~32
0.5~16, step:0.5
Interval Type
1~32
0.5~16, step:0.5
Interval Type
1~32
0.5~16, step:0.5
Interval Type
1~32
0.5~16, step:0.5
Interval Type
1~32
0.5~16, step:0.5
NO(Effect Later), Enumeratio YES(Effect n Type Immediately) YES, NO
None
None
None
NO, YES
None
YES
YES
NO, YES
None
NO
None
Interval Type
0~31
0~31
None
16
16
Interval Type
0~31
0~31
None
DATE(Input with date), WEEK(Input with week), DATEWEEK(Inpu Enumeratio t with date and DATE, WEEK, n Type week) DATEWEEK
None
None
None
Interval Type
1~15
1~15
None
15
15
Enumeratio OFF(OFF), n Type ON(ON) ERR_PFM_5E6( OCCUR:5E-6), ERR_PFM_1E5( OCCUR:1E-5), ERR_PFM_5E5( OCCUR:5E-5), ERR_PFM_1E4( OCCUR:1E-4), ERR_PFM_5E4( OCCUR:5E-4), ERR_PFM_1E3( OCCUR:1E-3), Enumeratio ERR_PFM_5E3( n Type OCCUR:5E-3)
OFF, ON
None
OFF
OFF
ERR_PFM_5E6, ERR_PFM_1E5, ERR_PFM_5E5, ERR_PFM_1E4, ERR_PFM_5E4, ERR_PFM_1E3, ERR_PFM_5E3
None
None
ERR_PFM_1E5
Interval Type
0~63
0~63
None
None
None
NO, YES
None
NO
NO
NoPriority(No Priority), Priority4(Priority 4), Priority3(Priority3) , Priority2(Priority 2), Priority1(Priority 1), Priority0(Priority 0), PriorityB(Priority B), Enumeratio PriorityA(Priority n Type A)
NoPriority, Priority4, Priority3, Priority2, Priority1, Priority0, PriorityB, PriorityA None
Priority4
Priority4
NO, YES
None
NO
NO
Interval Type
0~7
0~7
None
None
None
Interval Type
0~7
0~7
None
Interval Type
2~4094
2~4094
None
None
None
JAN(January), FEB(February), MAR(March), APR(April), MAY(May), JUN(June), JUL(July), AUG(August), SEP(September), OCT(October), Enumeratio NOV(November), n Type DEC(December)
JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC
None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
NO, YES
None
NO
NO
ENABLED(Enabl ed), Enumeratio DISABLED(Disab ENABLED, n Type led) DISABLED
None
None
None
Bit Field Type
A5/0~0 A5/1~1 A5/2~2 A5/3~3 A5/4~4 A5/5~5 A5/6~6 A5/7
A5/0, A5/1, A5/2, A5/3, A5/4, A5/5, A5/6, A5/7
None
A5/0-1&A5/10&A5/2-0&A5/30&A5/4-0&A5/50&A5/6-0&A5/70
A5/0-1&A5/1-0&A5/20&A5/3-0&A5/40&A5/5-0&A5/60&A5/7-0
AUTO(Automatic) , PLAINTEXT(Plai n Text), Enumeratio ENCRYPTED(SS AUTO, PLAINTEXT, n Type L Encrypted) ENCRYPTED None
AUTO
AUTO
AUTO(Auto), PLAINTEXT(Plai n Text), Enumeratio ENCRYPTED(SS AUTO, PLAINTEXT, n Type L Encrypte) ENCRYPTED None
None
None
NO, YES
None
NO
NO
Interval Type
1~65535
1~65535
None
None
None
Interval Type
0~65535
0~65535
None
None
None
Interval Type
0~65535
0~65535
None
None
None
Interval Type
1~31
1~31
None
None
None
Interval Type
-990~400
-99.0~40.0 (step: 0.1)
degree Celsius
JAN(Jan.), FEB(Feb.), MAR(Mar.), APR(Apr.), MAY(May), JUN(Jun.), JUL(Jul.), AUG(Aug.), SEP(Sep), OCT(Oct.), Enumeratio NOV(Nov.), n Type DEC(Dec)
None
None
None
Enumeratio 0(0), 2(2), 4(4), n Type 6(6)
0, 2, 4, 6
None
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
Interval Type
8~255
8~255
None
None
None
1~31
1~31, step:8
None
None
None
1~31
1~31
None
None
None
DISABLED(Prohi bit to Use), Enumeratio ENABLED(Availa DISABLED, n Type ble) ENABLED DISABLED(Prohi bit to Use), Enumeratio ENABLED(Availa DISABLED, n Type ble) ENABLED
None
None
None
None
ENABLED
ENABLED
Interval Type
0~100
0~100
per cent
70
70
OFF, ON
None
OFF
OFF
OFF, ON
None
ON
ON
Interval Type
1~255
1~255
Interval Type
0~63
0~63
dB
Interval Type
0~100
0~100
per cent
20
20
OFF, ON
None
ON
ON
OFF, ON
None
ON
ON
Interval Type
0~100
0~100
per cent
80
80
NO, YES
None
YES
None
M3UA_ASP~0||( M3UA_ASP)$$(M 3UA_ASP)** M3UA_IPSP(M3 UA_ASP)** M3UA_IPSP~2||( Enumeratio M3UA_IPSP)$$( M3UA_ASP, n Type M3UA_IPSP) M3UA_IPSP
None
None
None
M3UA_SGP(M3U A SGP), M3UA_IPSP(M3 UA IPSP), M3UA_SS7SP(M 3UA SS7SP), Enumeratio M3UA_SP(M3UA n Type SP)
M3UA_SGP, M3UA_IPSP, M3UA_SS7SP, M3UA_SP
None
None
None
Interval Type
0~63
0~63
dB
63
63
OFF, ON
None
OFF
OFF
Interval Type
1~4294967295
1~4294967295
None
None
None
NO, YES
None
NO
NO
O1E3_R5E4(OC CUR:1E-3, RECOVERY:5E4), O5E4_R1E4(OC CUR:5E-4, RECOVERY:1E4), O1E4_R5E5(OC CUR:1E-4, RECOVERY:5E5), O5E5_R1E5(OC CUR:5E-5, RECOVERY:1E5), O1E5_R5E6(OC CUR:1E-5, RECOVERY:5E6), O5E6_R1E6(OC CUR:5E-6, Enumeratio RECOVERY:1En Type 6)
O1E3_R5E4, O5E4_R1E4, O1E4_R5E5, O5E5_R1E5, O1E5_R5E6, O5E6_R1E6
None
O5E4_R1E4
O5E4_R1E4
OFF, ON
None
OFF
OFF
Interval Type
0~63
0~63
None
None
None
Interval Type
0~7
0~7
None
None
None
Interval Type
0~7
0~7
None
Interval Type
2~4094
2~4094
None
None
None
Interval Type
1~2147483646
1~2147483646
None
2147483646
2147483646
Interval Type
500~60000
500~60000
ms
3000
3000
CLOSE, OPEN
None
CLOSE
CLOSE
Interval Type
0~255
0~255
Compound Type
HOUR, MIN, SEC HOUR, MIN, SEC
None
None
None
Compound Type
year, month, date, hour, min, sec
2000-1-1 00:00:00~2037-1231 23:59:59
None
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
ONE_BY_ONE(E xecute One by One), Enumeratio PARALLEL(Parall ONE_BY_ONE, n Type el Execute) PARALLEL
None
None
ONE_BY_ONE
Compound Type
2000-1-1 00:00:00~2037-1231 23:59:59
None
None
None
Compound Type
hour, min, sec
00:00:00~23:59:59
None
None
None
Compound Type
hour, min, sec
00:00:00~23:59:59
None
None
None
Compound Type
1970-1-1 year, month, day, 00:00:00~2538-12hour, min, sec 31 23:59:59
None
None
None
Compound Type Compound Type
2000-1-1~2037-12year, month, day 31
None
None
None
hour, min, sec
00:00:00~23:59:59
None
None
None
LOGINEVENT(Lo gin Event), MANAGEEVENT (Management Event), AUTHEVENT(Aut hentication Event), Enumeratio OTHEREVENT( n Type Other Event)
LOGINEVENT, MANAGEEVENT, AUTHEVENT, OTHEREVENT
None
None
None
Compound Type
hour, min, sec
00:00:00~23:59:59
None
None
None
SUN(Sunday), MON(Monday), TUE(Tuesday), WED(Wednesda y), THU(Thursday), SUN, MON, TUE, Enumeratio FRI(Friday), WED, THU, FRI, n Type SAT(Saturday) SAT FIRST(First), SECOND(Secon d), THIRD(Third), FIRST, SECOND, Enumeratio FOURTH(Fourth) THIRD, FOURTH, n Type , LAST(Last) LAST
None
None
None
None
None
None
String Type None
1~9 characters
V or A
0.02 None
String Type None
1~9 characters
V or A
0.004 None
VOLTAGE(Voltag e), Enumeratio CURRENT(Curre VOLTAGE, n Type nt) CURRENT
None
CURRENT
None
String Type None
1~9 characters
V or A
100 None
String Type None
1~9 characters
V or A
0 None
String Type None
1~9 characters
V or A
0.02 None
String Type None
1~9 characters
V or A
0.004 None
None
CURRENT
None
String Type None
1~9 characters
V or A
100 None
String Type None
1~9 characters
V or A
0 None
String Type None
1~9 characters
V or A
0.02 None
String Type None
1~9 characters
V or A
0.004 None
None
CURRENT
None
String Type None
1~9 characters
V or A
100 None
String Type None
1~9 characters
V or A
0 None
String Type None
1~9 characters
V or A
0.02 None
String Type None
1~9 characters
V or A
0.004 None
None
CURRENT
None
String Type None
1~9 characters
V or A
100 None
String Type None
1~9 characters
V or A
0 None
NoExclusive(NoE xclusive), Enumeratio Exclusive(Exclusi NoExclusive, n Type ve) Exclusive
None
NoExclusive
NoExclusive
Interval Type
0~100
0~100
per cent
None
25
Interval Type
0~63
0~63
dB
30
30
Interval Type
0~63
0~63
dB
30
30
Interval Type
2048~5047
2048~5047
None
None
None
String Type None
1~64 characters
None
None
None
Interval Type
5048~8047
5048~8047
None
None
None
String Type None
1~64 characters
None
None
None
Interval Type
2048~5047
2048~5047
None
None
None
String Type None
1~64 characters
None
None
None
CLOSE, OPEN
None
CLOSE
CLOSE
NO, YES
None
YES
YES
Enumeratio EM0(EM0), n Type EM1(EM1)
EM0, EM1
None
EM0
EM0
60sec(60sec), 120sec(120sec), 240sec(240sec), 480sec(480sec), 960sec(960sec), 1920sec(1920sec ), 3840sec(3840sec ), Enumeratio 7680sec(7680sec n Type )
60sec, 120sec, 240sec, 480sec, 960sec, 1920sec, 3840sec, 7680sec
60sec
60sec
TYPE1(TYPE1), Enumeratio TYPE2(TYPE2), n Type TYPE3(TYPE3)
TYPE1, TYPE2, TYPE3
None
TYPE1
TYPE1
Normal_cell(Nor mal cell), DualTS_ExtCell( Enumeratio Double Timeslot Normal_cell, n Type Extension Cell) DualTst_ExtCell
None
Normal_cell
Normal_cell
SEND(SEND), Enumeratio NOTSEND(NOT n Type SEND) SEND, NOTSEND
None
SEND
SEND
Interval Type
0~255
0~12750, step: 50
ms
NO, YES
None
NO
NO
NO, YES
None
NO
NO
OFF, ON
None
None
None
OFF, ON
None
OFF
None
Interval Type
0~63
0~63
dB
30
30
PLUS_1(Current FanSpeed Plus 1), MINUS_1(Curren Enumeratio t FanSpeed n Type Minus 1) PLUS_1, MINUS_1 None Enumeratio HIGH_SPEED, n Type LOW_SPEED HIGH_SPEED, LOW_SPEED
None
None
None
None
None
Interval Type
55~100
55~100
None
None
None
CONTINUOUS(C ontinuous), DISCRETE(Discr ete), CONTINUOUS, Enumeratio DUTY_RATIO(Du DISCRETE, n Type ty Ratio) DUTY_RATIO NORMAL_FAN(N ormal Fan), Enumeratio IND_FAN(Indepe NORMAL_FAN, n Type ndent Fan) IND_FAN
None
None
None
None
None
None
NO_SPEED_ADJ USTMENT(No Speed Adjustment), HW_AUTO_TEM PERATURE_CO NTROL(Auto Temperature Control), SPECIFY_RATE( Specify Rate), SOFTWARE_CO Enumeratio NTROL(Software n Type Control)
NO_SPEED_ADJU STMENT, HW_AUTO_TEMPE RATURE_CONTRO L, SPECIFY_RATE, SOFTWARE_CONT ROL None
SOFTWARE_C SOFTWARE_CONTR ONTROL OL
IND_FAN(Indepe ndent Fan), Enumeratio NORMAL_FAN(N IND_FAN, n Type ormal Fan) NORMAL_FAN
None
None
None
Interval Type
0~100
0~100
per cent
NO, YES
None
NO
NO
OFF, ON
None
OFF
OFF
OFF, ON
None
None
None
CLOSE, OPEN
None
CLOSE
CLOSE
Interval Type
0~100
0~100
per cent
55
75
Interval Type
0~1999
0~1999
None
None
None
Interval Type
0~1999
0~1999
None
Interval Type
0~1999
0~1999
None
Interval Type
0~1999
0~1999
None
Interval Type
10~1999
10~1999
None
None
None
Interval Type
0~1999
0~1999
None
Interval Type
2~1999
2~1999
None
None
None
Interval Type
0~62
0~62
None
None
None
Interval Type
0~62
0~62
None
None
None
Interval Type
0~100
0~100
per cent
85
85
None(None), Enumeratio 16bit(16bit), n Type 32bit(32bit)
None, 16bit, 32bit
None
16bit
16bit
None(None), Enumeratio 16bit(16bit), n Type 32bit(32bit)
None, 16bit, 32bit
None
16bit
16bit
Enumeratio n Type ON, OFF
ON, OFF
None
ON
None
Interval Type
432~575
43.2~57.5 (step: 0.1) V
535
535
AUTO, MANU
None
None
None
AUTO, MANU
None
None
None
Interval Type
0~7
0~42, step: 6
dB
Interval Type
0~7
dB
Interval Type
0~1
0~1
None
None
None
Interval Type
0~16383
0~16383
None
None
None
Interval Type
0~49
0~49
dB
10
10
Interval Type
0~3
0~3
None
Interval Type
0~7
-20, -6, -18, -8, -16, 10, -14, -12 dB
Interval Type
0~7
0~7
dB
Interval Type
0~15
Negative infinity, 28~28, step: 4
dB
Enumeratio RSCP(RSCP), n Type EcN0(Ec/N0)
RSCP, EcN0
None
RSCP
RSCP
Interval Type
0~15
-114~-84, step: 2
dBm
Interval Type
0~63
0~63
None
10
10
Interval Type
0~511
0~511
None
None
None
Interval Type
1~1000
1~1000
None
NO, YES
None
NO
For the doubletransceiver BTS and NGBTS, the default value is NO; for other BTS, this parameter is invalid.
Interval Type
0~1000
0~1000
per mill
Interval Type
0~1000
0~1000
per mill
Interval Type
0~1000
0~1000
per mill
Interval Type
0~1000
0~1000
per mill
16
16
Interval Type
0~1000
0~1000
per mill
32
32
Interval Type
0~1000
0~1000
per mill
64
64
Interval Type
0~1000
0~1000
per mill
128
128
NO_FH(No frequency hopping), BaseBand_FH(B aseband frequency hopping), RF_FH(RF frequency hopping), Hybrid_FH(Hybrid NO_FH, Enumeratio frequency BaseBand_FH, n Type hopping) RF_FH, Hybrid_FH
None
NO_FH
NO_FH
String Type None
1~128 characters
None
None
None
String Type None
1~200 characters
None
None
None
String Type None
0~200 characters
None
None
None
String Type None
0~128 characters
None
None
None
Enumeratio txt(.txt File), n Type csv(.csv File)
txt, csv
None
csv
csv
Interval Type
0~32
0~32
None
FALSE(Failed), Enumeratio TRUE(Succeede n Type d) FALSE, TRUE
None
None
None
NO, YES
None
NO
NO
INACTIVE
INACTIVE
Interval Type
0~100
0~100
per cent
80
80
Interval Type
0~65534
0~65534
Interval Type
0~65534
0~65534
ENABLE
ENABLE
Interval Type
60~65534
60~65534
900
900
Interval Type
60~65534
60~65534
900
900
FIX_16K_ABIS(Fi x Abis), FLEX_ABIS(Flex Abis), FIX_16K_ABIS, Enumeratio SEMI_ABIS(Semi FLEX_ABIS, n Type solid Abis) SEMI_ABIS
None
FIX_16K_ABIS
FIX_16K_ABIS
OFF, ON
None
OFF
When tight frequency reuse is used, the recommended value is ON.
OFF, ON
None
OFF
OFF
Interval Type
0~65535
0~65535
ms
4500
4500
Interval Type
0~65535
0~65535
ms
1000
1000
OFF, ON
None
None
ON
OFF, ON
None
ON
ON
OFF, ON
None
ON
ON
OFF, ON
None
ON
ON
OFF, ON
None
ON
ON
OFF, ON
None
None
None
Interval Type
0~20
0~20
None
10
10
Interval Type
0~20
0~20
None
10
10
Interval Type
0~20
0~20
None
10
10
Interval Type
0~20
0~20
None
10
10
Interval Type
0~20
0~20
None
10
10
Interval Type
0~20
0~20
None
10
10
Interval Type
0~20
0~20
None
10
10
Interval Type
0~20
0~20
None
10
10
Interval Type
0~200
0~200
None
CLOSE, OPEN
None
OPEN
OPEN
Interval Type
0~19 0~19 INDOOR(Indoor), Enumeratio OUTDOOR(Outd INDOOR, n Type oor) OUTDOOR
None
None
None
None
String Type None
0~128 characters
None
None
None
String Type None
1~100 characters
None
None
None
String Type None
1~128 characters
None
None
None
String Type None
0~128 characters
None
None
None
String Type None
0~100 characters
None
None
none
String Type None
1~256 characters
None
None
None
String Type None
1~256 characters
None
None
None
Enumeratio OPEN(Open), n Type CLOSE(Close)
OPEN, CLOSE
None
OPEN
OPEN
Interval Type
1~300
1~300
15
15
Interval Type
0~30
0~30
Close, Open
None
Close
Close
NO, YES
None
NO
NO
NO, YES
None
YES
YES
Interval Type
0~31
0~31
None
None
None
Interval Type
0~23
0~23
None
None
None
Interval Type
1~30
1~30
ms
OFF, ON
None
None
None
OFF, ON
None
None
None
OFF, ON
None
None
None
Interval Type
128~1024
128~1024
byte
256 None
Interval Type
2715647~271564 7 -2715647~2715647 None
None
None
Interval Type
0~255
0~255
None
NO, YES
None
YES
YES
ONTIME(Fixed Time), Enumeratio RELATIVE_T(Rel ONTIME, n Type ative Time) RELATIVE
None
None
None
ONTIME(Fixed Time), DAILY_T(Day Based Scheduling), DAILY_C(Day Based Duration), WEEKLY_T(Wee k Based Scheduling), WEEKLY_C(Wee k Based Duration), MONTHLY_T(Mo nth Based Scheduling), MONTHLY_C(Mo Enumeratio nth Based n Type Duration)
ONTIME, DAILY_T, DAILY_C, WEEKLY_T, WEEKLY_C, MONTHLY_T, MONTHLY_C None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
NO, YES
None
NO
NO
Interval Type
0~65535
0~65535
None
36671
36671
PGSM900(PGSM 900), EGSML25(EGSM <L25>), EGSM35M(EGS M<35M>), RGSML25(RGS M<L25>), GSM900_RGSM 39M(GSM900_R GSM<39M>), DCS1800(DCS18 00), PCS1900(PCS19 00), GSM850(GSM85 0), EGSM24M(EGS M<24M>), DCS1800_L(DCS 1800<L50M>), Enumeratio DCS1800_H(DC n Type S1800<H50M>)
PGSM900, EGSML25, EGSM35M, RGSML25, GSM900_RGSM39 M, DCS1800, PCS1900, GSM850, EGSM24M, DCS1800_L, DCS1800_H None
None
None
0~100
0~100
per cent
25
25
0~1023
0~1023
None
None
None
Enumeratio LOOSE(Loose), n Type TIGHT(Tight)
LOOSE, TIGHT
None
LOOSE
LOOSE
String Type None
1~800 characters
None
None
None
MainDiversity(Mai nDiversity), MaximumMeanV MainDiversity, Enumeratio alue(MaximumMe MaximumMeanValu n Type anValue) e None
MaximumMeanV alue MaximumMeanValue
NO, YES
None
YES
YES
May_Use(May Use), Shall_Use(Shall Use), May_Use, Enumeratio Shall_NOT_Use( Shall_Use, n Type Shall not Use) Shall_NOT_Use
None
Shall_Use
Shall_Use
Interval Type
0~23
0~23
None
None
None
Interval Type
0~23
0~23
None
None
None
Interval Type
0~255
0~255
None
None
None
Interval Type
0~254
0~254
None
None
None
TXT(Plain Text Enumeratio Type), CSV(CSV n Type Type) TXT, CSV
None
TXT
TXT
Interval Type
0~33
0~33
None
None
None
Interval Type
1~33
1~33
None
None
None
Interval Type
0~33
0~33
None
None
None
Interval Type
0~255
0~255
dB
20
20
Interval Type
0~600
0~600
Interval Type
1~32
0.5~16, step:0.5
Interval Type
0~255
0~255
dB
10
10
Interval Type
0~600
0~600
Interval Type
1~32
0.5~16, step:0.5
Interval Type
0~200000
0~200000
kbit/s
Interval Type
0~200000
0~200000
kbit/s
Interval Type
0~100
0~100
per cent
20
20
Interval Type
0~100
0~100
per cent
15
15
Interval Type
0~200000
0~200000
kbit/s
Interval Type
0~100
0~100
per cent
Interval Type
0~200000
0~200000
kbit/s
Interval Type
0~100
0~100
per cent
Interval Type
0~100
0~100
per cent
Interval Type
0~200000
0~200000
kbit/s
Interval Type
0~200
-100~100
per cent
110
110
Interval Type
0~100
0~100
None
10
10
Enumeratio n Type A0, U1
A0, U1
None
A0
A0
Interval Type
0~31
0~31
None
12
12
Compound Type
hour, min
hour{0~23} min{0~59}
None
None
None
Interval Type
0~100
0~100
None
40
40
OFF, ON
None
None
ON
Compound Type
hour, min
hour{0~23} min{0~59}
None
None
None
Enumeratio NO(Not Support), n Type YES(Support) NO, YES
None
NO
NO
OFF, ON
None
OFF
OFF
Enumeratio DEG(DEG), n Type SEC(SEC)
DEG, SEC
None
DEG
DEG
NO, YES
None
YES
YES
NO, YES
None
YES
YES
OFF(Disable the golbal route management), ON(Enable the Enumeratio golbal route n Type management)
OFF, ON
None
None
None
Interval Type
4~32
0.5~4, step: 1/8
bit
20
20
NO(Not support), SupportAsInnPcu (Support as builtin PCU), SupportAsExtPcu NO, Enumeratio (Support as SupportAsInnPcu, n Type external Pcu) SupportAsExtPcu NO(Not Support), SupportAsInnPcu (Support As Inner Pcu), SupportAsExtPcu NO, Enumeratio (Support As SupportAsInnPcu, n Type Outer Pcu) SupportAsExtPcu
None
NO
None
None
NO
NO
0dB(0dB), 2dB(2dB), 4dB(4dB), 6dB(6dB), 8dB(8dB), 10dB(10dB), Enumeratio 12dB(12dB), n Type 14dB(14dB)
0dB, 2dB, 4dB, 6dB, 8dB, 10dB, 12dB, 14dB dB
2dB
2dB
GPRS(GPRS Channel), EGPRSNORCH( EGPRS Normal Channel), EGPRSPRICH(E GPRS Priority Channel), EGPRSSPECH( EGPRS Special Channel), Enumeratio NONGPRS(Nonn Type GPRS Channel)
GPRS, EGPRSNORCH, EGPRSPRICH, EGPRSSPECH, NONGPRS
None
NONGPRS
NONGPRS
DB110(-110dB), DB108(-108dB), DB106(-106dB), DB104(-104dB), DB102(-102dB), DB100(-100dB), DB98(-98dB), DB96(-96dB), DB94(-94dB), DB92(-92dB), DB90(-90dB), DB88(-88dB), DB86(-86dB), DB84(-84dB), DB82(-82dB), DB80(-80dB), DB78(-78dB), DB76(-76dB), DB74(-74dB), DB72(-72dB), DB70(-70dB), DB68(-68dB), DB66(-66dB), DB64(-64dB), DB62(-62dB), DB60(-60dB), DB58(-58dB), DB56(-56dB), DB54(-54dB), DB52(-52dB), DB50(-50dB), Enumeratio DB48(-48dB), n Type nouse(no use)
DB110, DB108, DB106, DB104, DB102, DB100, DB98, DB96, DB94, DB92, DB90, DB88, DB86, DB84, DB82, DB80, DB78, DB76, DB74, DB72, DB70, DB68, DB66, DB64, DB62, DB60, DB58, DB56, DB54, DB52, DB50, DB48, no use dB
DB110
DB110
10sec(10sec), 20sec(20sec), 30sec(30sec), 40sec(40sec), 50sec(50sec), 60sec(60sec), 70sec(70sec), 80sec(80sec), 90sec(90sec), 100sec(100sec), 110sec(110sec), 120sec(120sec), 130sec(130sec), 140sec(140sec), 150sec(150sec), 160sec(160sec), 170sec(170sec), 180sec(180sec), 190sec(190sec), 200sec(200sec), 210sec(210sec), 220sec(220sec), 230sec(230sec), 240sec(240sec), 250sec(250sec), 260sec(260sec), 270sec(270sec), 280sec(280sec), 290sec(290sec), 300sec(300sec), 310sec(310sec), Enumeratio 320sec(320sec), n Type nouse(no use)
10sec, 20sec, 30sec, 40sec, 50sec, 60sec, 70sec, 80sec, 90sec, 100sec, 110sec, 120sec, 130sec, 140sec, 150sec, 160sec, 170sec, 180sec, 190sec, 200sec, 210sec, 220sec, 230sec, 240sec, 250sec, 260sec, 270sec, 280sec, 290sec, 300sec, 310sec, 320sec, no use s
10sec
10sec
Interval Type
0~7
0~7
None
0db(0db), 10db(10db), 20db(20db), 30db(30db), 40db(40db), 50db(50db), 60db(60db), Enumeratio infinity(infinity), n Type nouse(no use)
0db, 10db, 20db, 30db, 40db, 50db, 60db, infinity, no use dB
10db
10db
GPS(GPS), GLONASS(Glona ss), Enumeratio GPSGlonass(GP GPS, GLONASS, n Type SGlonass) GPSGlonass Interval Type
None
GPS
GPS
1~60
1~60
min
10
10
NO, YES
None
NO
NO
Interval Type
0~100000000
0~100000000
None
None
None
Interval Type
0~100000000
0~100000000
None
None
None
Interval Type
0~65534
0~65534
None
None
None
String Type None
1~20 characters
None
None
None
Interval Type
0~512
0~512
None
Interval Type
0~2047
0~2047
None
None
None
Enumeratio n Type IP(IP)
IP
None
None
None
LAC_CI(CELL IMME), PLMN(ALL), Enumeratio LAC(LAC), n Type CI(CELL)
LAC_CI, PLMN, LAC, CI
None
None
LAC_CI
Interval Type
0~100
0~100
per cent
80
80
Interval Type
1~15
1~15
None
10
10
Interval Type
0~3
0~3
None
None
SUPPORT
SUPPORT
Bit Field Type
ECHOREPLY, UNREACH, SOURCEQUENC H, REDIRECT, ECHO, ROUTERADVER T, ROUTERSOLICI T, TIMXCEED, PARAMPROB, TSTAMP, TSTAMPREPLY, IREQ, IREQREPLY, MASKREQ, MASKREPLY
ECHOREPLY, UNREACH, SOURCEQUENCH, REDIRECT, ECHO, ROUTERADVERT, ROUTERSOLICIT, TIMXCEED, PARAMPROB, TSTAMP, TSTAMPREPLY, IREQ, IREQREPLY, MASKREQ, MASKREPLY None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
255.255.255.255 255.255.255.255
NO, YES
None
NO
NO
Interval Type
0~255
0~255
dB
20
20
Interval Type
0~600
0~600
Interval Type
1~32
0.5~16, step:0.5
Interval Type
0~255
0~255
dB
10
10
Interval Type
1~32
0.5~16, step:0.5
NO, YES
None
NO
NO
NO, YES
dB
NO
NO
Interval Type
1000~600000
1000~600000
None
None
1000(application type is M3UA), 5000(application type is BBAP)
Interval Type
0~62
0~62
None
None
None
Interval Type
1~16
0.5~8, step:0.5
Interval Type
1~16
0.5~8, step:0.5
Interval Type
0~65535
0~65535
None
65535 None
Interval Type
0~65535
0~65535
None
65535 None
Enumeratio DCS1800, n Type PCS1900
DCS1800, PCS1900 None
DCS1800
DCS1800
Interval Type
1~14
1~14
None
YES, NO
None
NO
NO
NO, YES
None
NO
NO
NO, YES
None
YES
YES
NO, YES
None
YES
YES
Interval Type
1~10
1~10
None
None
None
UNSUPPORT
None
SysOpt(System optimization), OSubcell(Overlai d subcell), USubcell(Underla id subcell), Enumeratio NoPrefer(No SysOpt, OSubcell, n Type preference) USubcell, NoPrefer
None
SysOpt
SysOpt
NO, YES
None
NO
NO
Interval Type
0~63
0~63
dB
10
10
Interval Type
0~63
0~63
dB
BYCELLNAME(B Enumeratio y cell name), BYCELLNAME, n Type BYCGI(By CGI) BYCGI
None
None
None
String Type None
1~64 characters
None
None
None
HOALGORITHM 1(Handover algorithm I), HOALGORITHM Enumeratio 2(Handover HOALGORITHM1, n Type algorithm II) HOALGORITHM2
None
HOALGORITHM 1 HOALGORITHM1
NO, YES
None
NO
NO
Interval Type
0~16
0~16
None
Interval Type
0~16
0~16
None
Interval Type
0~63
0~63
dB
50
50
Interval Type
1~32
0.5~16, step:0.5
Interval Type
1~32
0.5~16, step:0.5
Interval Type
0~49
0~49
dB
35
35
Interval Type
1~32
0.5~16, step:0.5
FREE(Free), INCELL(Intracell), OUTCELL(Outgoi ng cell), OUTST(Outgoing site), OUTBSC(Outgoi ng BSC), OUTSYS(Outgoin g system), Enumeratio SPCELL(Specifie n Type d cell)
FREE, INCELL, OUTCELL, OUTST, OUTBSC, OUTSYS, SPCELL None
None
None
Interval Type
0~127
0~127
dB
68
68
Interval Type
0~61
0~61
dB
32
32
Pre_2G_Cell(Pref erence for 2G cell), Pre_3G_Cell(Pref erence for 3G cell), Pre_2G_CellThre Pre_2G_Cell, Enumeratio s(Preference 2G Pre_3G_Cell, n Type cell by thresh) Pre_2G_CellThres
None
Pre_2G_CellThr es Pre_2G_CellThres
Interval Type
0~255
0~255
Interval Type
0~63
0~63
None
None
None
Interval Type
0~63
0~63
None
None
None
BaseBand_FH(B Enumeratio aseBand FH), BaseBand_FH, n Type RF_FH(RF FH) RF_FH
None
None
None
NO(Not StartUp), Enumeratio YES(StartUp), n Type NONE(None) NO, YES, NONE
None
YES
YES
Interval Type
0~63
0~63
dB
25
25
OFF, ON
None
OFF
OFF
Interval Type
0~63
0~63
None
Interval Type
0~23
0~23
None
None
None
NO_FH(No Frequency Hopping), BaseBand_FH(B aseband Frequency Hopping), RF_FH(RF NO_FH, Enumeratio Frequency BaseBand_FH, n Type Hopping) RF_FH
None
NO_FH
NO_FH
Interval Type
0~63
0~63
dB
63
63
Interval Type
1~60
1~60
min
15
15
Interval Type
0~63
0~63
dB
50
50
NO, YES
None
YES
YES
Interval Type
1~32
0.5~16, step:0.5
10
10
Interval Type
1~32
0.5~16, step:0.5
10
10
Interval Type
1~32
0.5~16, step:0.5
SINGLEHOST(SI NGLEHOST), PRIMHOST(PRI MHOST), SINGLEHOST, Enumeratio SLAVEHOST(SL PRIMHOST, n Type AVEHOST) SLAVEHOST
None
SINGLEHOST
SINGLEHOST
SINGLEHOST(Si ngle Host), PRIMHOST(Prim ary Host), SINGLEHOST, Enumeratio SLAVEHOST(Sla PRIMHOST, n Type ve Host) SLAVEHOST
None
SINGLEHOST
SINGLEHOST
Interval Type
0~63
0~63
dB
25
25
Interval Type
0~63
0~63
dB
50
50
NO_HPANT(No), NO_HPANT, Enumeratio YES_HPANT(Ye YES_HPANT, n Type s), NONE(None) NONE
None
NONE
NONE
NO_HPANT(No), Enumeratio YES_HPANT(Ye NO_HPANT, n Type s) YES_HPANT
None
None
None
Interval Type
0~5
0~5
None
None
None
Interval Type
1~14
1~14
None
NO, YES
None
NO
NO
Interval Type
350~556
35.0~55.6 (step: 0.1) V
440
440
NO, YES
None
NO
NO
NO, YES
None
YES
YES
NO, YES
None
YES
YES
May_Use(May Use), Shall_Use(Shall Use), May_Use, Enumeratio Shall_NOT_Use( Shall_Use, n Type Shall not Use) Shall_NOT_Use
None
Shall_Use
Shall_Use
Interval Type
0~63
0~63
None
Interval Type
0~23
0~23
None
None
None
OFF, ON
None
OFF
OFF
Interval Type
0~254
0~254
None
None
None
SBFD(SINGLE_H OP), Enumeratio MBFD(MULTI_H n Type OP) SBFD, MBFD
None
None
None
Interval Type
-99~70
-99~70
degree Celsius
40
40
Interval Type
0~30
0~30
degree Celsius
None
None
DISABLE(DISAB LE), Enumeratio ENABLE(ENABL n Type E) DISABLE, ENABLE None Enumeratio CLOSE(Close), n Type OPEN(Open)
ENABLE
ENABLE
CLOSE, OPEN
None
OPEN
None
String Type None
1~9 characters
per cent
80 None
String Type None
1~9 characters
per cent
10 None
Interval Type
0~1000
0.0~100.0 (step: 0.1) None
If "Power System Type" is "SC48200", the recommended value is "900". For other types of Power System, the recommended value is 1000 "1000".
Interval Type
0~1000
0.0~100.0 (step: 0.1) None
800
800
Interval Type
0~1000
0.0~100.0 (step: 0.1) None
If "Power System Type" is "SC48200", the recommended value is "100". For other types of Power System, the recommended value is 0 "0".
Interval Type
0~1000
0.0~100.0 (step: 0.1) None
100
100
Interval Type
1~30
1~30
min
15
15
180~1260
180~1260
720
720
1~60
1~60
min
None
None
E1PORT0(E1 PORT0), E1PORT1(E1 PORT1), E1PORT2(E1 PORT2), E1PORT3(E1 PORT3), OPTICALPORT0 (OPTICAL PORT0), OPTICALPORT1 Enumeratio (OPTICAL n Type PORT1)
E1PORT0, E1PORT1, E1PORT2, E1PORT3, OPTICALPORT0, OPTICALPORT1
None
None
None
MAINDOMU(MAI N DOMU), SLAVEDOMU1(S LAVE DOMU1), MAINDOMU, Enumeratio SLAVEDOMU2(S SLAVEDOMU1, n Type LAVE DOMU2) SLAVEDOMU2
None
None
None
Interval Type
60~600
60~600
90
90
Interval Type
0~23
0~23
dB
Interval Type
0~23
0~23
dB
10
10
NO, YES
None
NO
NO
Interval Type
0~20
0~10, Step: 0.5
Interval Type
1~4
ms
Interval Type
0~14
0~14
dB
Interval Type
0~14
0~14
dB
Interval Type
0~63
0~63
dB
NO, YES
None
NO
Set this parameter to YES for the neighboring cell with co-channel interference and the neighboring cell that may cause interference; set this parameter to NO for other neighboring cells.
Interval Type
0~20
0~10, Step: 0.5
OFF, ON
None
OFF
OFF
OFF, ON
None
OFF
OFF
Interval Type
0~23
0~23
dB
10
10
Interval Type
0~20
0~10, Step: 0.5
Interval Type
0~23
0~23
dB
13
13
Interval Type
0~31
0~31
dB
10
10
NO, YES
None
YES
YES
Interval Type
2~600
2~600
Interval Type
0~63
0~63
dB
Interval Type
0~63
0~63
dB
Interval Type
0~22
0~22
dB
Interval Type
0~22
0~22
dB
Interval Type
0~63
0~63
dB
0(Max. optimized MAIO), Enumeratio 1(Randomization n Type MAIO) 0, 1
None
Interval Type
5~40
5~40
None
20
20
NO, YES
None
NO
NO
Interval Type
0~63
0~63
dB
Interval Type
0~30
0~30
dB
Interval Type
0~20
0~10, Step: 0.5
Interval Type
0~16
0~16
None
Interval Type
0~63
0~63
None
Interval Type
2~600
2~600
Interval Type
0~50
0~50
dB
It is recommended that you set the path loss offset of layer 1 neighboring cells of the serving cell to 15 dB and that of other neighboring cells to 25 15 dB.
Interval Type
0~10
0~10
None
Interval Type
0~63
0~63
dB
Interval Type
0~160
0~160
dB
110
110
Interval Type
0~23
0~23
dB
NO, YES
None
NO
NO
OFF, ON
None
OFF
OFF
Interval Type
0~63
0~63
None
20
20
NO(Disabled in OL and UL subcell), UNDER(Enabled in UL subcell), INNER( Enabled in OL subcell), YES(Enabled in Enumeratio OL and UL NO, UNDER, n Type subcell) INNER, YES
None
UNDER
UNDER
NO, YES
None
NO
NO
Interval Type
0~23
0~23
dB
NO(NO), Enumeratio YES(YES), n Type NULL(NULL)
NO, YES, NULL
None
NO
NO
ENABLE
For SingleRAN BTS, the recommended value is "ENABLE". For other types of BTS, the recommended value is "DISABLE".
Interval Type
44~1024
44~1024
byte
64
64
Interval Type
0~63
0~63
None
22
22
Interval Type
0~63
0~63
None
20
20
Interval Type
0~63
0~63
None
18
18
Interval Type
1~30
1~30
None
None
None
1~30,100~32767 1~30, 100~32767
None
None
None
0~65535
0~65535
None
None
None
Interval Type
0~255
0~255
None
84
84
Interval Type
0~255
0~255
None
None
None
Interval Type
0~63
0~63
None
BYIDX(By Index), Enumeratio BYNAME(By n Type Name) BYIDX, BYNAME
None
None
None
None
None
None
BYNAME(By Enumeratio Name), BYID(By n Type Index) BYNAME, BYID BYNAME(By name), BYID(By Enumeratio index), BYCGI(By BYNAME, BYID, n Type CGI) BYCGI BYNAME(By Enumeratio Name), BYID(By n Type Index) BYNAME, BYID
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Interval Type
0~255
0~255
None
None
None
Enumeratio BYTLLI(By TLLI), n Type BYIMSI(By IMSI) BYTLLI, BYIMSI
None
None
None
Enumeratio BYCELL(By Cell), n Type BYBSC(By BSC) BYCELL, BYBSC
None
None
None
Enumeratio YES(Yes), n Type NO(No)
YES, NO
None
YES
YES
Interval Type
0~15
0~3071
None
None
None
Enumeratio Positive(Positive) n Type , Minus(Minus) Positive, Minus
None
Positive
Positive
Interval Type
0~125
0~125
None
NO(Not Report), Enumeratio YES(Need n Type Report)
NO, YES
None
YES
YES
Interval Type
0~32
0~32
None
String Type None
1~15 characters
None
None
None
Interval Type
1000~30000
1000~30000
ms
5000
5000
NO, YES
None
NO
NO
None
NO
NO
NO, YES
None
NO
NO
Interval Type
0~254
0~254
ms
Interval Type
1~5
1~5
None
NO, YES
None
NO
NO
NO, YES
None
NO
NO
Interval Type
0~255
0~255
bit
NO, YES
None
NO
NO
Interval Type
0~255
0~255
10
10
String Type None
1~15 characters
None
None
None
String Type None
1~15 characters
None
None
None
Interval Type
500~60000
500~60000
ms
10000
10000
0~8
0~8
bit
1~30
1~30
Interval Type
0~360
0~360
degree
360
360
Interval Type
0~62
0~62
None
None
None
NO, YES
None
NO
NO
Interval Type
1~32
0.5~16, step:0.5
Interval Type
1~32
0.5~16, step:0.5
10
10
Bit Field Type
CELLCAPCLASS , CELLCAPCLASS, NACCRELATED NACCRELATED
None
CELLCAPCLAS S CELLCAPCLASS
CLOSE, OPEN
None
OPEN
None
Interval Type
0~39
0~39
None
25
25
Interval Type
0~39
0~39
None
12
12
Interval Type
0~50
0~50
Interval Type
0~3
0~3
None
Interval Type
0~3
0~3
None
Interval Type
Bit Field Type
0~2 TS0, TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
0~2
None
TS0, TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None
None
None
NO, YES
None
NO
NO
NO, YES
None
YES
YES
0~2047
0~2047
None
None
None
String Type None
1~64 characters
None
None
None
NO, YES
None
NO
NO
Interval Type
1~255
1~255
10
10
Interval Type
0~63
0~63
dB
Interval Type
0~100
0~100
per cent
90
90
Interval Type
0~335
0~335
None
None
None
Interval Type
0~23
0~23
None
None
None
Interval Type
0~15
0~15
None
None
None
Degree(Degree), D_min_sec(Degr Enumeratio ee Minute n Type Second) Degree, D_min_sec None
Degree
Degree
NO, YES
None
NO
NO
Interval Type
0~27
0~27
None
None
None
Interval Type
0~23
0~23
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~254
0~254
None
None
None
Interval Type
2~3600
2~3600
None
60
Interval Type
0~127
0~127
dB
67
67
INTBANI(INTBA NI), Enumeratio INTBANII(INTBA n Type NII) INTBANI, INTBANII None
INTBANII
INTBANII
Interval Type
0~127
0~127
dB
In densely populated urban areas, the recommended value is 68; in the suburbs, the recommended value is 68 72.
Interval Type
0~255
0~255
15
15
Interval Type
1~16
0.5~8, step:0.5
Interval Type
1~16
0.5~8, step:0.5
NO, YES
None
YES
YES
NO, YES
None
YES
YES
Interval Type
48~115
48~115
None
110
110
Interval Type
48~115
48~115
None
105
105
Interval Type
48~115
48~115
None
98
98
Interval Type
48~115
48~115
None
92
92
Interval Type
48~115
48~115
None
87
87
Interval Type
48~115
48~115
None
85
85
Interval Type
0~60
0~60
Interval Type
1~31
480~14880, step: 480
ms
20
20
NO, YES
None
NO
NO
Interval Type
1~100
1~100
None
80
80
NO, YES
None
NO
NO
NO, YES
None
NO
NO
Interval Type
1~49
1~49
dB
20
20
Interval Type
0~49
0~49
dB
49
49
Interval Type
1~49
1~49
dB
Interval Type
1~91
1~91
dB
60
60
Interval Type
0~91
0~91
dB
91
91
Interval Type
1~91
1~91
dB
10
10
NO, YES
None
NO
NO
Servicebased(Servicebased), Loadbased(Loadbased), Dynamicbased(Dynamic Service/Loadbased), CnServicebased(CN Enumeratio Service-based), n Type OFF(OFF) {0~4}
None
OFF
OFF
Interval Type
1~240
1~240
72
72
Interval Type
1~10
1~10
Interval Type
0~31
0~31
None
Interval Type
0~63
0~63
dB
30
30
Interval Type
500~60000
500~60000
ms
None
None
Interval Type
500~60000
500~60000
ms
10000
10000
NO, YES
None
YES
YES
NO, YES
None
NO
In the hot-spot areas, densely populated urban areas, urban areas, suburbs, and rural areas, the recommended value is YES; in the highspeed circumstances, the recommended value is NO.
Interval Type
500~60000
500~60000
ms
10000
10000
NO, YES
None
None
None
Interval Type
0~49
0~49
dB
25
25
Interval Type
1~255
1~255
10
10
Interval Type
0~91
0~91
dB
30
30
Interval Type
0~255
0~255
None
None
None
Interval Type
0~31
0~31
None
None
None
Interval Type
1~1440
1~1440
min
30 None
Interval Type
30~1024
30~1024
None
None
Enumeratio NO(No), n Type YES(Yes) IP Address Type
NO, YES
None
NO
NO
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
255.255.255.255 255.255.255.255
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type IP Address Type IP Address Type
None
0.0.0.0~255.255.255 .255 None 0.0.0.0~255.255.255 .255 None 0.0.0.0~255.255.255 .255 None
None
None
None
None
None
None
None
None
IP Address Type IP Address Type
None
0.0.0.0~255.255.255 .255 None 0.0.0.0~255.255.255 .255 None
None
None
None
None
None
IP Address Type IP Address Type IP Address Type
None
0.0.0.0~255.255.255 .255 None 0.0.0.0~255.255.255 .255 None 0.0.0.0~255.255.255 .255 None
None
None
None
None
None
None
None
None
Interval Type
0~100
0~100
per cent
10
10
Interval Type
0~100
0~100
per cent
No_HC(No_HC), UDP/IP_HC(UDP /IP_HC), RTP/UDP/IP_HC No_HC, Enumeratio (RTP/UDP/IP_H UDP/IP_HC, n Type C) RTP/UDP/IP_HC
None
UDP/IP_HC
UDP/IP_HC
No_HC(No_HC), UDP/IP_HC(UDP /IP_HC), RTP/UDP/IP_HC No_HC, Enumeratio (RTP/UDP/IP_H UDP/IP_HC, n Type C) RTP/UDP/IP_HC
None
UDP/IP_HC
UDP/IP_HC
Interval Type
0~5
0~5
None
None
None
0~5
0~5
None
None
None
0~12999
0~12999
None
None
None
Enumeratio IP_OVER_FE/GE IP_OVER_FE/GE, n Type , IP_OVER_E1 IP_OVER_E1
None
IP_OVER_FE/G E IP_OVER_FE/GE
IP_OVER_FE/GE (IP_OVER_FE/G E), Enumeratio IP_OVER_E1(IP_ IP_OVER_FE/GE, n Type OVER_E1) IP_OVER_E1
None
None
None
NO, YES
None
NO
NO
NO, YES
None
None
NO
NO, YES
None
NO
NO
UNSUPPORT(No t Support Reducy), Enumeratio SUPPORT(Supp UNSUPPORT, n Type ort Reducy) SUPPORT
None
None
None
UNSUPPORT(No t Support Reducy), Enumeratio SUPPORT(Supp UNSUPPORT, n Type ort Reducy) SUPPORT
None
None
None
NO, YES
None
NO
NO
YES, NO
None
NO
NO
Enumeratio NO(Not support), n Type YES(Support) NO, YES
None
YES
YES
NO, YES
None
None
None
None
YES
YES
NO, YES
None
NO
NO
NO, YES
None
None
None
NO, YES
None
None
None
None
NO
NO
STATIC(Static), Enumeratio DYNAMIC(Dyna n Type mic)
STATIC, DYNAMIC None
None
None
NO, YES
None
None
None
NO, YES
None
NO
NO
YES(Configure), Enumeratio NO(Not n Type Configure) Enumeratio NO(NO), n Type YES(YES)
YES, NO
None
None
None
NO, YES
None
NO
NO
NO, YES
None
NO
NO
NO, YES
None
NO
NO
Enumeratio YES(YES), n Type NO(NO)
YES, NO
None
None
None
NO, YES
None
NO
NO
NO, YES
None
NO
NO
NOT_CONFIG(N OT CONFIGURED), Enumeratio CONFIG(CONFI NOT_CONFIG, n Type GURED) CONFIG
None
NOT_CONFIG
NOT_CONFIG
Interval Type
1~64
1~64
None
None
None
Interval Type
1~30
1~30
None
None
None
TRUE(Support), Enumeratio FALSE(Not n Type Support)
TRUE, FALSE
None
None
None
Interval Type
0~65535
0~65535
None
65535
65535
ABIS(Abis Interface), A(A Interface), ATER(ATER Interface), Enumeratio IUR_G(IUR_G n Type Interface)
ABIS, A, ATER, IUR_G
None
None
None
Enumeratio PPP(PPP), n Type MP(MP)
PPP, MP
None
None
None
OVERLAID(Overl aid Subcell), UNDERLAID(Und OVERLAID, Enumeratio erlaid Subcell), UNDERLAID, n Type NONE(None) NONE CONVERT0(Only convert at UL), CONVERT1(Only convert at OL), CONVERT2(UL first and convert allowed), CONVERT3(OL Enumeratio first and convert n Type allowed)
None
NONE
NONE
CONVERT0, CONVERT1, CONVERT2, CONVERT3
None
CONVERT0
CONVERT0
Interval Type
1~32
0.5~16, step:0.5
Interval Type
1~32
0.5~16, step:0.5
10
10
Normal_cell(Nor mal Cell), Concentric_cell(C oncentric Cell), EDB_cell(Enhanc Normal_cell, Enumeratio ed Double Concentric_cell, n Type Frequency Cell) EDB_cell
None
Normal_cell
Normal_cell
OFF, ON
None
None
OFF
Hexadecimal(Hex decimal), Enumeratio Character_String( Hexadecimal, n Type Character String) Character_String
None
Character_String Character_String
String Type None
0~124 characters
None
None
SBS 155
String Type None
0~124 characters
None
None
SBS 155
Enumeratio NULL, 1byte, n Type 16byte, 64byte
NULL, 1byte, 16byte, 64byte
None
None
16byte
OFF, ON
None
None
OFF
none
Character_String Character_String
String Type None
0~124 characters
None
None
SBS 155
String Type None
0~124 characters
None
None
SBS 155
Enumeratio NULL, 1byte, n Type 16byte, 64byte
NULL, 1byte, 16byte, 64byte
None
None
16byte
OFF, ON
None
None
OFF
None
None
None
NULL, 1BYTE, Enumeratio 16BYTE, n Type 64BYTE
NULL, 1BYTE, 16BYTE, 64BYTE
None
None
None
String Type None
0~64 characters
None
None
None
String Type None
0~64 characters
None
None
None
Enumeratio ZERO(zero), n Type SPACE(space)
ZERO, SPACE
None
None
SPACE
None
None
Interval Type
1~255
1~255, (step: 20)
ms
None
None
Enumeratio DENY(Deny), n Type ALLOW(Allow)
DENY, ALLOW
None
DENY
When the disorder phenomenon is severe in the IP network, the recommended value is ALLOW; when there is no or little disordered packets, you are recommended to set this parameter to DENY to avoid extra transmission delay.
NOT-INDICATEEND(NOTINDICATE-END), INDICATENOT-INDICATEEnumeratio END(INDICATE- END, INDICATEn Type END) END
None
None
None
Interval Type
0~63
0~63
dB
Interval Type
1~30
1~30
Interval Type
1~65533,65535
1~65533, 65535
None
None
None
Interval Type
1~65533,65535
1~65533, 65535
None
None
None
STATIC_LACP, STATIC_LACP, Enumeratio MANUAL_AGGR MANUAL_AGGREG n Type EGATION ATION None
None
None
String Type None
1~5 characters
degree
None
None
Interval Type
0~90
0~90
degree
None
None
Interval Type
0~90
0~90
degree
None
None
Interval Type
0~59
0~59
minute
None
None
Interval Type
0~9
0~9
second
None
None
Interval Type
0~59
0~59
second
None
None
Interval Type
90000000~90000 -90~90, step: 000 0.000001
degree
None
None
String Type None
90:00:00.000~90:00: 00.000 SEC
None
None
Interval Type
1~100
100~10000, step:100
ms
Interval Type
0~100
0~100
None
Interval Type
0~10000
0~10000
ms
25
25
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
1, 2, 3, 4
None
1, 2, 3, 4
None
Interval Type
0~100
0~100
None
Interval Type
0~300
0~300
20
20
Interval Type
0~300
0~300
30
30
CLOSE(Close), PSDOWN(PS Downspeeding), AMRC(AMRC), CSPH(CS Preference TCHH), CLOSE, PSDOWN, Enumeratio CSFHHO(CS AMRC, CSPH, n Type TCHF-TCHH HO) CSFHHO None CLOSE(Close), PSDOWN(PS Downspeeding), AMRC(AMRC), CSPH(CS Preference TCHH), CLOSE, PSDOWN, Enumeratio CSFHHO(CS AMRC, CSPH, n Type TCHF-TCHH HO) CSFHHO None CLOSE(Close), PSDOWN(PS Downspeeding), AMRC(AMRC), CSPH(CS Preference TCHH), CLOSE, PSDOWN, Enumeratio CSFHHO(CS AMRC, CSPH, n Type TCHF-TCHH HO) CSFHHO None
CSFHHO
CSFHHO
PSDOWN
PSDOWN
AMRC
AMRC
Interval Type
0~186 0~186 None CRITICAL(Critical Enumeratio ), MAJOR(Major), CRITICAL, MAJOR, n Type MINOR(Minor) MINOR None INFO(Information Level), WARN(Warn Level), ERR(Error Level), Enumeratio AST(Assert INFO, WARN, ERR, n Type Level) AST None Enumeratio ON(ON), n Type OFF(OFF)
None
None
None
None
None
None
ON, OFF
None
None
ON
Interval Type
0~7
0~7
None
NO(Not Support), Enumeratio YES(Support), n Type NONE(Invalid) NO, YES, NONE
None
YES
None
NO, YES
None
YES
YES
Interval Type
0~63
0~63
dB
Interval Type
1~32
0.5~16, step:0.5
Interval Type
1~32
0.5~16, step:0.5
OAM, TDM_Switching, GCP, RGCP, MCP, GTC, GPCU, IP, FR, HDLC, TDM, GbIP, Abis_TDM, Ater_TDM, Pb_TDM, Enumeratio A_TDM, Abis_IP, n Type SAU TDM_Switching, GCP, RGCP, MCP, GTC, GPCU, IP, FR, HDLC, TDM, GbIP, Abis_TDM, Ater_TDM, Enumeratio Pb_TDM, n Type A_TDM, Abis_IP
OAM, TDM_Switching, GCP, RGCP, MCP, GTC, GPCU, IP, FR, HDLC, TDM, GbIP, Abis_TDM, Ater_TDM, Pb_TDM, A_TDM, Abis_IP, SAU None TDM_Switching, GCP, RGCP, MCP, GTC, GPCU, IP, FR, HDLC, TDM, GbIP, Abis_TDM, Ater_TDM, Pb_TDM, A_TDM, Abis_IP None
None
None
None
None
Enumeratio n Type IP, Abis_IP
IP, Abis_IP
None
None
None
Enumeratio A/Gb, n Type Abis/Ater/Pb/Gb
A/Gb, Abis/Ater/Pb/Gb
None
None
None
Interval Type
5120~5375
5120~5375
None
None
None
Interval Type
0~99
0~99
None
10
10
Interval Type
90~99
90~99
per cent
90
90
Interval Type
70~95
70~95
per cent
70
70
Interval Type
0~17407
0~17407
None
None
None
Enumeratio DIFFERENCE, n Type ALL
DIFFERENCE, ALL None
DIFFERENCE
DIFFERENCE
Enumeratio 64K(64Kbit/s), n Type 2M(2Mbit/s)
64K, 2M
bit/s
64K
64K
String Type None
0~9 characters
None
10 None
String Type None
1~8 characters
None
None
None
TS1(Time_slot_1) , TS2(Time_slot_2) , TS3(Time_slot_3) , TS4(Time_slot_4) , TS5(Time_slot_5) , TS6(Time_slot_6) , TS7(Time_slot_7) , TS8(Time_slot_8) , TS9(Time_slot_9) , TS10(Time_slot_ 10), TS11(Time_slot_ 11), TS12(Time_slot_ 12), TS13(Time_slot_ 13), TS14(Time_slot_ 14), TS15(Time_slot_ 15), TS16(Time_slot_ 16), Enumeratio TS17(Time_slot_ n Type 17),
None
None
None
Interval Type
0~40
0~40
35
35
Interval Type
40~80
40~80
45
45
LUCENT_MODE, HUAWEI_MODE, LUCENT_MODE, Enumeratio ALCATEL_MOD HUAWEI_MODE, n Type E ALCATEL_MODE 8K(8Kbit/s), 16K(16Kbit/s), 32K(32Kbit/s), Enumeratio 64K(64Kbit/s), n Type 2M(2Mbit/s)
None
None
None
8K, 16K, 32K, 64K, 2M
None
None
None
M3UA_MASTER _MOD(M3UA_M ASTER_MOD), M3UA_SLAVE_M Enumeratio OD(M3UA_SLAV n Type E_MOD)
M3UA_MASTER_M OD, M3UA_SLAVE_MO D None
M3UA_MASTER M3UA_MASTER_MO _MOD D
B0000(B0000), B0001(B0001), B0010(B0010), B0011(B0011), B0100(B0100), B0101(B0101), B0110(B0110), B0111(B0111), B1000(B1000), B1001(B1001), B1010(B1010), B1011(B1011), B1100(B1100), B1101(B1101), Enumeratio B1110(B1110), n Type B1111(B1111)
B0000, B0001, B0010, B0011, B0100, B0101, B0110, B0111, B1000, B1001, B1010, B1011, B1100, B1101, B1110, B1111
None
B1111
B1111
None
B1111
B1111
Interval Type
0~100
0~100
per cent
80
80
RANDOMALG(R andom Algorithm), Enumeratio OTHERALG(MS RANDOMALG, n Type ID Algorithm) OTHERALG
None
RANDOMALG
RANDOMALG
Interval Type
1~10
1~10
Interval Type
0~1000
0~1000
None
100
100
NO, YES
None
NO
NO
NO, YES
None
NO
NO
NO, YES
None
NO
NO
NO, YES
None
NO
NO
Interval Type
0~127
-64dB ~ 63dB
None
Interval Type
0~255
0~255
10
10
Interval Type
0~63
0~63
dB
63
63
Interval Type
1~255
1~255
10
10
Interval Type
1~63
1~63
dB
Interval Type
1~16
1~16
None
Interval Type
0~63
0~63
dB
25
25
NO, YES
None
NO
NO
Enumeratio FORBID(Forbid), n Type PERMIT(Permit) FORBID, PERMIT
None
PERMIT
PERMIT
Interval Type
0~63
0~63
None
40
40
Interval Type
0~100
0~100
per cent
60
60
Interval Type
0~100
0~100
per cent
85
85
NO, YES
None
YES
YES
NOTSTADYNPD CH(Not count dynamic PDCH), DYNPDCHASOC CUPY(Count dynamic PDCH(Occupy)), DYNPDCHASIDL Enumeratio E(Count dynamic n Type PDCH(Idle)) Enumeratio OFF(OFF), n Type ON(ON)
NOTSTADYNPDCH , DYNPDCHASOCC UPY, DYNPDCHASIDLE None
DYNPDCHASID LE DYNPDCHASIDLE
OFF, ON
None
None
None
Interval Type
0~65534
0~65534
None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1
0~1
None
None
None
0~35
0~35
None
None
None
0~35
0~35
None
None
None
String Type None
1~200 characters
None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
Enumeratio OFF(Unlock), n Type ON(Lock)
OFF, ON
None
ON
OFF
Interval Type
1024~65535
1024~65535
None
None
None
LFB(Load from OMU and write Enumeratio flash), n Type CL(Consult Load) LFB, CL NORMMODE(No rmal Mode), RAPMODENOSE RV(Rapid Mode<No service>), RAPMODERESS ERV(Rapid Enumeratio Mode<Reserve n Type BCCH trx>)
None
None
None
NORMMODE, RAPMODENOSER V, RAPMODERESSER V None
NORMMODE
NORMMODE
Interval Type
30~100
30~100
per cent
90
95
Interval Type
30~100
30~100
per cent
90
80
NO, YES
None
None
None
Interval Type
0~988
0~988
None
None
None
Interval Type
0~5,8~27
0~5, 8~27
None
None
None
Interval Type
30~100
30~100
per cent
80
85
Interval Type
30~100
30~100
per cent
80
70
ON, OFF
None
ON
ON
Bit Field Type
PFM_RESULT, HOST_PFM_RE SULT, ACTIVE_DEF_M EAS_FILE, STANDBY_DEF_ MEAS_FILE, PFM_SWITCHS, HISTORY_ALAR M, HISTORY_FAUL T, ALM_SYSTEM_ CFG, SECURITY_LOG , OPT_LOG, OMU_LOG, BSC_CFG_MML, CELL_BASIC_IN FO, BSC_SERIES_N O, DB_BAK, MEM_DB_BAK, BTS_BASIC_INF O, BTS_CHECK_LO G, BTS_DEBUG_L OG, BTS_CHR_LOG, TRX_LOG, BTS_NET_TABL E, DEBUG_LOG, LAST_WORD,
PFM_RESULT, HOST_PFM_RESU LT, ACTIVE_DEF_MEA S_FILE, STANDBY_DEF_M EAS_FILE, PFM_SWITCHS, HISTORY_ALARM, HISTORY_FAULT, ALM_SYSTEM_CF G, SECURITY_LOG, OPT_LOG, OMU_LOG, BSC_CFG_MML, CELL_BASIC_INFO , BSC_SERIES_NO, DB_BAK, MEM_DB_BAK, BTS_BASIC_INFO, BTS_CHECK_LOG, BTS_DEBUG_LOG, BTS_CHR_LOG, TRX_LOG, BTS_NET_TABLE, DEBUG_LOG, LAST_WORD, DSP_DEBUG_LOG, HOST_LOG, 2G_CHR_LOG, 2G_UNILATERAL_ CONNECT, BSC_INFO, None
None
None
COMLOG(Comm on Log), Enumeratio CMPLOG(Compr COMLOG, n Type ess Log) CMPLOG
None
None
None
String Type None
1~5 characters
degree
None
None
Interval Type
0~180
0~180
degree
None
None
Interval Type
0~180
0~180
degree
None
None
Interval Type
0~59
0~59
minute
None
None
Interval Type
0~9
0~9
second
None
None
Interval Type
0~59
0~59
second
None
None
Interval Type
180000000~1800 -180~180, step: 00000 0.000001
degree
None
None
String Type None Interval Type
180:00:00.000~180: 00:00.000 SEC
None
None
1~3
1~3
None
None
None
BYLOCAL(By Local Loop), Enumeratio BYREMOTE(By n Type Remote Loop)
BYLOCAL, BYREMOTE
None
None
None
OFF, ON
None
None
ON
LOOPTYPE_TD M(Line Loop), LOOP_TYPE_LV DS(LVDS Loop), LOOPTYPE_TDM, Enumeratio LOOPTYPE_MC LOOP_TYPE_LVDS n Type C(MCC Loop) , LOOPTYPE_MCC None
None
None
Interval Type
0~100 0~100 MSC(MSC Enumeratio Direction), n Type MS(MS Direction) MSC, MS
per cent
80
80
None
None
None
NSSAINTF(NSS Interface Unit), NSSTCTOABIS( NSS TC(Near Abis Interface)), NSSTCTOA(NSS TC(Near A Interface)), NSSTNUTOABIS (NSS TNU(Near Abis Interface)), NSSTNUTOA(NS S TNU(Near A Interface)), NSSATERINTF( NSS Ater Interface Unit), BSSATERINTF(B SS Ater Interface Unit), BSSTCTOABIS( BSS TC(Near Abis Interface)), BSSTCTOA(BSS TC(Near A Interface)), BSSTNUTOABIS (BSS TNU(Near Abis Interface)), BSSTNUTOA(BS S TNU(Near A Interface)), Enumeratio BSSABISINTF(B n Type SS Interface
NSSAINTF, NSSTCTOABIS, NSSTCTOA, NSSTNUTOABIS, NSSTNUTOA, NSSATERINTF, BSSATERINTF, BSSTCTOABIS, BSSTCTOA, BSSTNUTOABIS, BSSTNUTOA, BSSABISINTF, BTSTMU, BTSTRUDSP
None
None
None
NO_LOOP(No loop), REMOTE_LOOP( Remote loop), LINE_REM_LOO P(Line remote loop), LOCAL_LOOP(L ocal loop), PAYLOAD_LOO P(payload loop), SIN_CHN_LOC(s ingle channel local loop), SIN_CHN_REM( Enumeratio single channel n Type remote loop)
NO_LOOP, REMOTE_LOOP, LINE_REMOTE_LO OP, LOCAL_LOOP, PAYLOAD_LOOP, SIN_CHN_LOC, CIN_CHN_REM None
None
None
NO_LOOP(NO_L OOP), LOCAL_LOOP(L OCAL_LOOP), NO_LOOP, Enumeratio REMOTE_LOOP( REMOTE_LOOP, n Type REMOTE_LOOP) LOCAL_LOOP Interval Type
None
None
None
60~600
60~600
180
180
Interval Type
1~100
1~100
None
NO, YES
None
NO
NO
NO, YES
None
NO
NO
OFF, ON
None
ON
ON
OFF, ON
None
OFF
You are advised to disable this function in the co-BCCH cell with the inter-site distance not more than 1500m.
NO, YES
None
NO
For EPS4815 boards, the value of this parameter is set to "NO".
NO, YES
None
NO
NO
E1(E1 Loopback), Enumeratio TIMESLOT(Time n Type slot Loopback) E1, TIMESLOT
None
None
None
Interval Type
0~988
0~988
None
None
None
Interval Type
FG2a/GOUa board:0~119;FG2c board:0~489, 512~767;GOUc board:0~499, 512~767;POUc(IP)b 0~988,1024~153 oard:0~988, 5 1024~1535 None FG2a/GOUa/UOIa(I P) board:0~119;FG2c board:0~489, 512~767;GOUc board:0~499, 512~767;POUc(IP) 0~988,1024~153 board:0~988, 5 1024~1535 None
None
None
Interval Type
None
None
Interval Type
0~5,8~27
0~5, 8~27
None
None
None
Enumeratio Hub(Hub), n Type Leaf(Leaf)
Hub, Leaf
None
None
None
Enumeratio n Type IR(IR), LA(LA)
IR, LA
None
IR
IR
DISABLE
DISABLE
Interval Type
350~556
35.0~55.6 (step: 0.1) V
None
If "Power System Type" is "SC48200", the recommended value is "475". For other Power System Type of APMU boards, the recommended value is "440".
CLOSE(Close), PSDOWN(PS Downspeeding), AMRC(AMRC), CSPH(CS Preference TCHH), CLOSE, PSDOWN, Enumeratio CSFHHO(CS AMRC, CSPH, n Type TCHF-TCHH HO) CSFHHO None EXCLUDE(Exclu de List Command), Enumeratio INCLUDE(Include EXCLUDE, n Type List Command) INCLUDE
CSPH
CSPH
None
None
INCLUDE
HORIZONTAL(H ORIZONTAL), Enumeratio VERTICAL(VERT HORIZONTAL, n Type ICAL) VERTICAL
None
HORIZONTAL
None
HORIZONTAL(H ORIZONTAL), Enumeratio VERTICAL(VERT HORIZONTAL, n Type ICAL) VERTICAL APPLICATION(A pplication Program), SCNDCPU_PRO G(Secondary Thread Program), BOOTROM(BOO TROM Program), DATA(Data file), DSP(DSP Program), Enumeratio FAN(Fan n Type Program)
None
HORIZONTAL
HORIZONTAL
APPLICATION, SCNDCPU_PROG, BOOTROM, DATA, DSP, FAN None
APPLICATION
APPLICATION
OPTLOG(Operati on Log), Enumeratio SECLOG(Securit n Type y Log) OPTLOG, SECLOG None OPTLOG(Operati on Log), Enumeratio SECLOG(Securit n Type y Log) OPTLOG, SECLOG None
OPTLOG
None
None
OPTLOG
Interval Type
-99~70
-99~70
degree Celsius
Interval Type
-99~99
-99~99
degree Celsius
-1
-1
Interval Type
2~255
2~255
None
Interval Type
2~255
2~255
None
Interval Type
2~255
2~255
None
60
60
Interval Type
2~255
2~255
None
Interval Type
0~12
0~12
None
14(1.4), 15(1.5), 16(1.6), 18(1.8), 20(2.0), 22(2.2), 24(2.4), 26(2.6), 28(2.8), 30(3.0), Enumeratio 33(3.3), 36(3.6), n Type 88(8.8)
14, 15, 16, 18, 20, 22, 24, 26, 28, 30, 33, 36, 88
None
20
20
18, 20, 22, 24, 26, 28, 30, 32, 35, 38, 41, 45, 88
None
30
30
ENABLE
For EPS4815, the recommended value is "DISABLE". For other types of APMU boards, the recommended value is "ENABLE".
1024~65535
1024~65535
None
2905
2905
0~8191
0~8191
None
None
None
Interval Type
0~100
0~100
per cent
None
10
Interval Type
0~100
0~100
per cent
None
CA_MA(CA+MA), Frequency_List(F requency List), OPTIMIZED_CA_ Enumeratio MA(Optimized n Type CA+MA)
CA_MA, Frequency_List, OPTIMIZED_CA_M A None
CA_MA
CA_MA
Interval Type
0~499
0~499
None
None
None
NO, YES
None
YES
YES
NO, YES
None
NO
NO
Compound Type
hour, min
00:00~23:59
None
None
None
Interval Type
0~15
0~3, Step:0.2
dB
Compound Type
hour, min
00:00~23:59
None
0:00 None
String Type None
1~64 characters
None
None
None
String Type None
1~64 characters
None
None
None
Interval Type
0~35
0~35
None
None
None
Interval Type
0~1
0~1
None
Interval Type
0~9999
0~9999
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~2000
0~2000
mA
170
170
Interval Type
0~2000
0~2000
mA
170
170
Interval Type
0~2000
0~2000
mA
170
170
Interval Type
0~2000
0~2000
mA
170
170
Interval Type
0~2000
0~2000
mA
170
170
Interval Type
0~2000
0~2000
mA
170
170
String Type None
1~20 characters
None
None
None
String Type None
1~20 characters
None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
255.255.255.255 255.255.255.255
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
Interval Type
0~32
0~32
dB
Interval Type
0~254
0~254
None
None
Interval Type
1~1562
64~100000, step:64 kbit/s
None
None
Interval Type
1~20
1~20
None
Interval Type
0~5
0~5
None
Interval Type
0~5
0~5
None
Interval Type
0~20
0~20
dB
10
10
Interval Type
1~2
1~2
None
Interval Type
1~2
1~2
None
Interval Type
24~1031
24~1031
byte
1031
1031
Interval Type
50~200
50~200
None
100
100
Interval Type
1~1500
1~1500
byte
256
256
Interval Type
1~1500
1~1500
None
None
None
Interval Type
1~255
1~255
None
None
None
Interval Type
10000~150000
10000~150000
None
None
None
Interval Type
1~1000
100~100000 (step: 100)
125
125
Interval Type
0~254
0~254
None
None
Interval Type
0~100
0~100
None
Interval Type
0~8
0~8
None
Interval Type
0~100
0~100
per cent
30
30
0~5
0~5
None
1~255
1~255
None
None
1C(0.01C), 2C(0.02C), 3C(0.03C), 4C(0.04C), 5C(0.05C), 6C(0.06C), 7C(0.07C), 8C(0.08C), 9C(0.09C), 10C(0.10C), 11C(0.11C), 12C(0.12C), 13C(0.13C), 14C(0.14C), 15C(0.15C), 16C(0.16C), 17C(0.17C), 18C(0.18C), 19C(0.19C), 20C(0.20C), 21C(0.21C), 22C(0.22C), 23C(0.23C), 24C(0.24C), 25C(0.25C), 26C(0.26C), 27C(0.27C), 28C(0.28C), 29C(0.29C), 30C(0.30C), 31C(0.31C), 32C(0.32C), Enumeratio 33C(0.33C), n Type 34C(0.34C),
1C, 2C, 3C, 4C, 5C, 6C, 7C, 8C, 9C, 10C, 11C, 12C, 13C, 14C, 15C, 16C, 17C, 18C, 19C, 20C, 21C, 22C, 23C, 24C, 25C, 26C, 27C, 28C, 29C, 30C, 31C, 32C, 33C, 34C, 35C, 36C, 37C, 38C, 39C, 40C, 41C, 42C, 43C, 44C, 45C, 46C, 47C, 48C, 49C, 50C, 51C, 52C, 53C, 54C, 55C, 56C, 57C, 58C, 59C, 60C, 61C, 62C, 63C, 64C, 65C, 66C, 67C, 68C, 69C, 70C, 71C, 72C, 73C, 74C, 75C, 76C, 77C, 78C, 79C, 80C, 81C, 82C, 83C, 84C, 85C, 86C, 87C, 88C, 89C, 90C, 91C, 92C, 93C, 94C, 95C, 96C, 97C, 98C, 99C None
15C
15C
5C(0.05C), 7C(0.07C), 10C(0.10C), 12C(0.12C), 15C(0.15C), 18C(0.18C), 20C(0.2C), Enumeratio 22C(0.22C), n Type 25C(0.25C)
5C, 7C, 10C, 12C, 15C, 18C, 20C, 22C, 25C
None
15C
15C
Interval Type
1~255
1~255
None
30
30
1_Times(1_Time s), 2_Times(2_Time s), 4_Times(4_Time s), Enumeratio 7_Times(7_Time 1_Times, 2_Times, n Type s) 4_Times, 7_Times
None
7_Times
7_Times
None
7_Times
7_Times
None
7_Times
7_Times
None
7_Times
7_Times
Interval Type
1~746
1~746
byte
64
64
Interval Type
1~746
1~746
None
None
None
Interval Type
0~30
0~30
dB
Interval Type
0~30
0~30
dB
Interval Type
0~30
0~30
dB
Interval Type
0~255
0~255
None
In Normal cell,the recommended value is 62;in Double Timeslot Extension Cell,the recommended value is 62 219.
Interval Type
0~31
0~31
None
20
20
OFF, ON
None
OFF
OFF
Interval Type
0~255
0~255
None
255
255
Interval Type
1~24
1~24
12
12
Interval Type
0~32
0~32
None
32
32
Interval Type
2~255
2~255
None
16
16
0~32
0~32
dB
1~999
1~999
None
None
Interval Type
0~511
0~511
None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
Interval Type
0~3
0~3
None
If the traffic volume on each frequency band is even and there is no special requirements for the frequency band, the recommended value is 0; if the traffic volume on each frequency band is significantly uneven and a frequency band is preferred for an MS, the recommended value is 3; if traffic volume on each frequency band is not extremely uneven, the recommended value is 1 or 2. For details, see 0 the GSM Rec. 05. 08.
Interval Type
0~31
ms
Interval Type
0~31
ms
Interval Type
0~2047
0~2047
None
None
None
String Type None
1~64 characters
None
None
None
String Type None
3 digit
None
None
None
String Type None
1~3 characters
None
None
None
Interval Type
4,8
4, 8
None
None
None
Interval Type
4,8
4(Use two bytes to present MC priority number, 4 classes), 8(Use four bytes to present MC priority number, 8 classes) None
Interval Type
0~2047
0~2047
None
None
None
String Type None
1~64 characters
None
None
None
Interval Type
0~62
0~62
None
None
None
ON, OFF
None
OFF
OFF
CLASS0(Class0), Enumeratio CLASS1(Class1), CLASS0, CLASS1, n Type CLASS2(Class2) CLASS2
None
CLASS0
CLASS0
Interval Type
0~7
0~7
None
None
None
Interval Type
0~7
0~7
None
String Type None
1~20 characters
None
None
None
String Type None
1~20 characters
None
None
None
NO, YES
None
NO
NO
Interval Type
1~5
1~5
EnhMeasReport( Enhanced Measurement Report), ComMeasReport( Common Enumeratio Measurement EnhMeasReport, n Type Report) ComMeasReport
None
ComMeasReport ComMeasReport
Interval Type
1~1000
1~1000
None
None
None
Interval Type
1~8191
1~8191
None
None
None
LocalMep(LocalM ep), Enumeratio RemoteMep(Rem LocalMep, n Type oteMep) RemoteMep
None
None
None
Enumeratio LONG(LONG), n Type SHORT(SHORT) LONG, SHORT
None
LONG
LONG
LONG(Long List Head), Enumeratio SHORT(Short n Type List Head)
LONG, SHORT
None
LONG
LONG
Interval Type
0~63
0~63
None
15
15
Interval Type
1~1562
64~100000, step:64 kbit/s
None
None
Interval Type
0~49
0~49
dB
10
10
Interval Type
0~63
0~63
dB
Interval Type
10~3500
10~3500
mA
170
170
Interval Type
10~3500
10~3500
mA
170
170
Interval Type
0~2000
0~2000
mA
170
170
Interval Type
0~2000
0~2000
mA
170
170
Interval Type
0~2000
0~2000
mA
170
170
Interval Type
0~2000
0~2000
mA
170
170
Interval Type
0~2000
0~2000
mA
170
170
Interval Type
0~2000
0~2000
mA
170
170
Interval Type
10~3500
10~3500
mA
140
140
Interval Type
10~3500
10~3500
mA
140
140
Interval Type
0~63
0~63
dB
16
16
Interval Type
60~3600
60~3600
60
60
Interval Type
0~63
0~63
dB
10
10
Interval Type
10~1000
10~1000
ms
100
100
Interval Type
10~1000
10~1000
ms
100
100
Interval Type
10~1000
10~1000
ms
100
100
Interval Type
10~1000
10~1000
ms
100
100
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
UP(upstream mirror), Enumeratio DOWN(downstre n Type am mirror) UP, DOWN
None
None
None
String Type None
2~3 digit
None
None
None
String Type None
1~64 characters
None
None
None
Interval Type
50~95
50~95
per cent
80
80
MANUAL(Manual Handover), AUTO(Auto Enumeratio Handover), MANUAL, AUTO, n Type FREE(Free-run) FREE
None
AUTO
AUTO
SERVER(SERVE R MOD), Enumeratio CLIENT(CLIENT n Type MOD) SERVER, CLIENT Enumeratio OFF(OFF), n Type ON(ON)
None
None
None
OFF, ON
None
None
OFF
GO(GSM), UO(UMTS), Enumeratio GU(GSM and n Type UMTS)
GO, UO, GU
None
None
None
FIXED(File of a Fixed Size), CYCLE(Periodica Enumeratio l Generation of n Type New File) FIXED, CYCLE
None
None
None
MODE1(1:1 Protection Switching), MODE2(1+1 Unidirectional Protection Switching), MODE3(1+1 Bidirectional Protection Enumeratio Switching), n Type MODE4(Y Line)
MODE1, MODE2, MODE3, MODE4
None
None
None
CHECK_ON_IND EPENDENT_PO RT, CHECK_ON_PRI MARY_PORT, Enumeratio CHECK_ON_ST n Type ANDBY_PORT
CHECK_ON_INDEP ENDENT_PORT, CHECK_ON_PRIM ARY_PORT, CHECK_ON_STAN DBY_PORT None
None
None
MODE1(Mode1), MODE1, Enumeratio MODE2(Mode2), MODE2, n Type MODE3(Mode3) MODE3
None
MODE1
MODE1
None
MODE1
MODE1
None
MODE1
MODE1
None
MODE1
MODE1
None
MODE1
MODE1
MODE1(Mode1), MODE1, Enumeratio MODE2(Mode2), MODE2, n Type MODE3(Mode3) MODE3 30MINS(30 Minutes), 60MINS(60 Minutes), 120MINS(120 Minutes), Enumeratio 240MINS(240 n Type Minutes)
None
MODE1
MODE1
30MINS, 60MINS, 120MINS, 240MINS None
None
None
Interval Type
1~1440
1~1440
None
None
Interval Type
0~12
0~12
None
None
None
Interval Type
0~600
0~600
m/s
35
35
Interval Type
0~100
0~100
per cent
10
10
Interval Type
0~100
0~100
per cent
0~167
0~31(PEUa), 0~167(POUc)
None
None
None
0~167
0~167
None
None
None
Interval Type
0~3
0~3
None
None
None
MODE1_1, MODE2_1, MODE3_1, MODE4_1, MODE5_1, Enumeratio MODE6_1, n Type MODE16K
MODE1_1, MODE2_1, MODE3_1, MODE4_1, MODE5_1, MODE6_1, MODE16K
None
MODE4_1
MODE4_1
Interval Type
0~1
0~1
None
None
If "BTS Type" is "BTS3900E_GSM", the recommended value is "0".
ENABLE
ENABLE
Enumeratio n Type MLPPP, MCPPP MLPPP, MCPPP
None
MCPPP
MCPPP
Interval Type
0~27
0~27
None
None
None
Interval Type
0~11
0~11
None
None
None
NO, YES
None
YES
YES
Interval Type
0~31
0~31
None
Interval Type
1~255
1~255
None
NOreport(Do not report), Twice_ps(Twice every second), Once_ps(Once every second), Once_2s(Once every two second), Once_4s(Once NOreport, Twice_ps, Enumeratio every four Once_ps, Once_2s, n Type second) Once_4s None
Once_ps
Once_ps
Interval Type
4~30
4~30
dB
Interval Type
4~30
4~30
dB
OFF, ON
None
OFF
OFF
OFF(Off), ON_WITH_SDC CH(On with SDCCH), ON_WITHOUT_ Enumeratio SDCCH(On n Type without SDCCH)
OFF, ON_WITH_SDCCH, ON_WITHOUT_SD CCH None
None
None
Interval Type
128~1500
128~1500
None
1500
1500
Interval Type
1~16
1~16
None
OFF, ON
None
OFF
OFF
Interval Type
0~65535
0~65535
None
1800
1800
Interval Type
1~10
1~10
None
Interval Type
0~1023
0~1023
None
NO, YES
None
NO
NO
OFFLOAD(Offloa d), NORMAL(Normal ), Enumeratio UNAVAIL(Unavai OFFLOAD, n Type lable) NORMAL, UNAVAIL None
NORMAL
NORMAL
R98_or_below(R 98 or below), Enumeratio R99_or_above(R R98_or_below, n Type 99 or above) R99_or_above
None
R98_or_below
R98_or_below
Interval Type
5000~40000
5000~40000
ms
15000
15000
String Type None
1~32 characters
None
None
None
String Type None
1~10 characters
None
None
None
String Type None
1~10 characters
None
None
None
String Type None
1~10 characters
None
None
None
String Type None
1~10 characters
None
None
None
String Type None
1~10 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
NO, YES
None
NO
NO
1_Times(1_Time s), 2_Times(2_Time s), 4_Times(4_Time s), Enumeratio 7_Times(7_Time 1_Times, 2_Times, n Type s) 4_Times, 7_Times CLEAR(Cleared), LOP(Lockout of Protection), FS(Forcibly switchover working link to protection link), MS(Manual switchover from working link to protection link), EXERS(Exercisel y switch working Enumeratio link to protection CLEAR, LOP, FS, n Type link) MS, EXERS,
None
4_Times
4_Times
None
None
None
None
MCS5
MCS5
Interval Type
10~80
10~80
None
40
40
Interval Type
0~254
0~254
None
None
None
Interval Type
0~63
0~63
dB
10
10
Interval Type
0~255
0~255
None
200
200
Interval Type
1000~3000
1000~3000
ms
1000
1000
Interval Type
1~600
1~600
45
45
Interval Type
0~31
0~31
None
ON, OFF
None
None
ON
Interval Type
50~95
50~95
per cent
85
85
ALARM_METHO D(Alarm method), Enumeratio LOOP_METHOD ALARM_METHOD, n Type (Loop method) LOOP_METHOD None
None
None
Interval Type
0~63
0~31(EIUa/OIUa), 0~63(POUc)
None
None
None
Enumeratio MET(Metric), n Type IMP(Imperial) Interval Type
MET, IMP
None
MET
MET
500~1500
500~1500
None
800
800
Interval Type
256~1650
256~1650
byte
None
1500
Interval Type
0~1500
0~1500
None
If "MTU" is set to a value smaller than 576, the DHCP procedure may fail when the BTS tries to retrieve the IP address, and thus the BTS cannot work. The recommended value of this parameter is 1500. Do not modify it unless in special scenarios, for example, at the bottom layer where the number of MTU is 1500 limited.
Interval Type
190~240
19.0~24.0, step:0.1
225
225
REPORT6(Repor t six), REPORT1(Repor t one), REPORT2(Repor t two), Enumeratio REPORT3(Repor n Type t three)
REPORT6, REPORT1, REPORT2, REPORT3
None
REPORT6
REPORT6
Interval Type
0~255
0~255
None
None
DISABLE
Interval Type
0~10
0~10
None
Interval Type
0~15
0~15
min
NO, YES
None
NO
NO
Interval Type
1~1500
1~1500
ls
1000
1000
Interval Type
1~1500
1~1500
ls
None
None
UDPMUX, Enumeratio ABISMUX, n Type ATERMUX
UDPMUX, ABISMUX, ATERMUX
None
None
None
Interval Type
0~12
0~12
None
Interval Type
1~512
1~16(FG2a/GOUa), 1~512(FG2c/GOUc) None
None
None
Interval Type
1~3
1~3
None
When the transmission quality is good, the recommended settings are as follows: "Ring II Wait Time Before Switch" = 0; "Ring II Try Rotating Duration Time" = 60; "Ring II Rotating Penalty Time" = 0; "T200" = 12; "T203" = 1; and "N200" = 3. When the transmission quality is bad, the recommended settings are as follows: "Ring II Wait Time Before Switch" = 30; "Ring II Try Rotating Duration Time" = 60; "Ring II Rotating Penalty Time" = 0; "T200" = 24; "T203" = 3; and 3 "N200" = 3.
Interval Type
5~254
5~254
None
Interval Type
34~254
34~254
None
34
34
Interval Type
29~254
29~254
None
29
29
OFF, ON
None
OFF
OFF
Interval Type
5~254
5~254
None
Interval Type
5~254
5~254
None
Interval Type
23~254
23~254
None
23
23
Interval Type
8~30
8~30
None
20
20
Interval Type
2~5
2~5
None
Interval Type
3~10
3~10
None
10
10
Interval Type
1~255
1~255
None
Interval Type
1~10
1~10
None
Interval Type
1~10
1~10
None
NO, YES
None
NO
None
String Type None
1~49 characters
None
None
None
String Type None
1~49 characters
None
None
None
String Type None
1~31 characters
None
None
None
String Type None
1~31 characters
None
None
None
String Type None
1~31 characters
None
None
None
String Type None
1~31 characters
None
None
None
String Type None
1~49 characters
None
None
None
String Type None
1~49 characters
None
None
None
String Type None
1~31 characters
None
None
None
String Type None
1~49 characters
None
None
None
String Type None
1~31 characters
None
None
None
String Type None
1~50 characters
None
None
None
NO, YES
None
NO
NO
Interval Type
0~15
0~15
None
DISABLE
DISABLE
Interval Type
0~5047
0~5047
None
None
None
String Type None
1~64 characters
None
None
None
Interval Type
0~5047
0~5047
None
None
None
String Type None
1~64 characters
None
None
None
Interval Type
0~5047
0~5047
None
None
None
String Type None
1~64 characters
None
None
None
Interval Type
5048~8047
5048~8047
None
None
None
String Type None
1~64 characters
None
None
None
Enumeratio OFF(OFF), n Type ON(ON) Interval Type
OFF, ON
None
None
None
0~65535
0~65535
None
None
None
Interval Type
1~65533,65535
1~65533, 65535
None
None
None
String Type None
1~3 characters
None
None
None
String Type None
1~3 characters
None
None
None
NO, YES
None
NO
None
NotSupport(Not Enumeratio Support), NOTSUPPORT, n Type Support(Support) SUPPORT
None
NO, YES
None
NO
None
Interval Type
0~7
0~7
None
None
None
Interval Type
0~7
0~7
None
None
None
Bit Field Type
SELECTION0_P ERM, SELECTION1_P ERM, SELECTION2_P ERM, SELECTION3_P ERM, SELECTION4_P ERM, SELECTION5_P ERM, SELECTION6_P ERM, SELECTION7_P ERM
SELECTION0_PER M, SELECTION1_PER M, SELECTION2_PER M, SELECTION3_PER M, SELECTION4_PER M, SELECTION5_PER M, SELECTION6_PER M, SELECTION7_PER M None
SELECTION0_P ERM1&SELECTION1 _PERM1&SELECTION2 _PERM1&SELECTION3 _PERM1&SELECTION4 _PERM1&SELECTION5 _PERM1&SELECTION6 _PERM1&SELECTION7 _PERM-1
SELECTION0_PERM1&SELECTION1_PER M1&SELECTION2_PER M1&SELECTION3_PER M1&SELECTION4_PER M1&SELECTION5_PER M1&SELECTION6_PER M1&SELECTION7_PER M-1
Interval Type
0~255
0~255
None
Interval Type
1~20
ms
Interval Type
1~31
Interval Type
0~127
0~127
dB
Interval Type
0~127
0~127
dB
60
60
Interval Type
0~127
0~127
dB
64
64
Interval Type
0~127
0~127
dB
68
68
Interval Type
0~127
0~127
dB
72
72
Interval Type
0~127
0~127
dB
74
74
Interval Type
0~127
0~127
dB
76
76
Interval Type
0~127
0~127
dB
80
80
Interval Type
0~7
0~7
None
Interval Type
0~7
0~7
None
NC0(NC0), Enumeratio NC1(NC1), n Type NC2(NC2)
NC0, NC1, NC2
None
NC0
NC0
NO(NO_DIRECT _CONNECT), Enumeratio YES(DIRECT_C n Type ONNECT) NO, YES IP Address Type
None
YES
YES
None
0.0.0.0~255.255.255 .255 None
None
None
Interval Type IP Address Type
0~60
0~60
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
INT(INT), INTB(INTB), Enumeratio NAT(NAT), n Type NATB(NATB)
INT, INTB, NAT, NATB
None
None
None
String Type None
1~62 characters
None
None
None
NMOI(Network Operation Mode I), NMOII(Network Operation Mode II), NMOIII(Network Enumeratio Operation Mode n Type III)
NMOI, NMOII, NMOIII
None
NMOII
NMOII
Interval Type
0~255
0~255
None
None
None
Interval Type
0~255
0~255
None
None
None
Interval Type
0~255
0~255
None
None
None
Interval Type
0~255
0~255
None
None
None
Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type
40~45
40~45
43 None
55~59
55~59
57 None
40~45
40~45
43 None
55~59
55~59
57 None
40~45
40~45
43 None
55~59
55~59
57 None
40~45
40~45
43 None
55~59
55~59
57 None
40~45
40~45
43 None
55~59
55~59
57 None
40~45
40~45
43 None
55~59
55~59
57 None
NO, YES
None
NO
NO
Interval Type
0~255
0~255
dB
Interval Type
0~255
0~255
dB
30
30
Interval Type
0~255
0~255
dB
Interval Type
0~255
0~255
dB
95
95
Interval Type
0~7
0~7
None
Interval Type
0~100
0~100
per cent
85
85
Interval Type
0~255
0~255
dB
14
14
Interval Type
0~255
0~255
dB
103
103
NO, YES
None
NO
NO
Interval Type
0~7
0~7
None
Interval Type
0~100
0~100
per cent
25
25
ABIS(Abis Interface), A(A Interface), BSC(Ater Interface on BSC), TC(Ater Interface on TC), Enumeratio IUR_G(IUR_G ABIS, A, BSC, TC, n Type Interface) IUR_G
None
None
None
Interval Type
0~64
0~64
None
NO, YES
None
NO
NO
Interval Type
0~70
0~70
None
50
50
Interval Type
1~1000
1~1000
Ah
100
100
OFF, ON
None
ON
ON
NODRX(NODRX) , 0.24sec(0.24sec), 0.48sec(0.48sec), 0.72sec(0.72sec), 0.96sec(0.96sec), 1.20sec(1.20sec), Enumeratio 1.44sec(1.44sec), n Type 1.92sec(1.92sec)
NODRX, 0.24sec, 0.48sec, 0.72sec, 0.96sec, 1.20sec, 1.44sec, 1.92sec
0.24sec
0.24sec
Interval Type
100~10000
100~10000
ms
2500
2500
Interval Type
100~10000
100~10000
ms
2500
2500
None
PERMIT
PERMIT
Interval Type
400~700
500
500
CLOSE, OPEN
None
CLOSE
CLOSE
Interval Type
1~255
5~1275, step:5
min
48
48
Interval Type
10~255
10~255
30
30
Interval Type
1~10
1~10
None
Interval Type
0~31
ms
Interval Type
0~31
ms
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~1023
0~1023
None
None
None
NO, YES
None
YES
YES
Interval Type
0~65534
0~65534
None
None
None
Interval Type
0~65534
0~65534
None
None
None
Interval Type
1~31
North_latitude(No rth latitude), Enumeratio South_latitude(So North_latitude, n Type uth latitude) South_latitude
None
None
None
Interval Type
0~65534
0~65534
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~30
0~30
degree Celsius
Interval Type
0~30
0~30
degree Celsius
16
16
Interval Type
1~255
1~255
None
10
10
Interval Type
0~100
0~100
per cent
None
None
Interval Type
0~100
0~100
per cent
Interval Type
0~100
0~100
per cent
Interval Type
0~100
0~100
per cent
Interval Type
0~100
0~100
per cent
Interval Type
0~63
0~63
None
None
None
Enumeratio OFF(OFF), n Type ON(ON) SITE(SITE), Enumeratio CELL(CELL), n Type BOARD(BOARD) BYCELL(By Enumeratio CELL), n Type BYTRX(By TRX) Interval Type
OFF, ON SITE, CELL, BOARD
None
None
None
None
None
None
BYCELL, BYTRX
None
None
None
0~499
0~499
None
None
None
Interval Type
0~499
0~499
None
None
None
ALL(Shield by Alarm ID), BOARD(Shield by Board), PORT(Shield by Enumeratio Port), DSP(Shield ALL, BOARD, n Type by DSP) PORT, DSP BTS(BTS), CELL(CELL), LOC(LOC), Enumeratio BOARD(BOARD) BTS, CELL, LOC, n Type , PORT(PORT) BOARD, PORT
None
None
None
None
None
None
CELL(Cell), Enumeratio TRX(TRX), n Type CHN(Channel)
CELL, TRX, CHN
None
None
None
OFF, ON
None
OFF
OFF
NO, YES
None
YES
YES
NO, YES
None
NO
NO
OFF, ON
None
None
OFF
Interval Type
4~255
4~255
10
10
Interval Type
0~63
0~63
None
None
None
Interval Type
0~256
0~256
kbit/s
64
64
Interval Type
0~256
0~256
kbit/s
64
64
Interval Type
0~7
0~7
None
None
None
Interval Type
0~7
0~7
None
Interval Type
2~4094
2~4094
None
None
None
Interval Type
0~96
0~96
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
String Type None
1~32 characters
None
None
None
Interval Type
1~16777215
1~16777215
None
None
None
Interval Type
1~16777215
1~16777215
None
None
None
Interval Type
0~4
0~4
None
None
None
PRIM(Primary Operator), Enumeratio SEC(Secondary n Type Operator)
PRIM, SEC
None
None
None
Interval Type
0~3
0~3
None
None
None
Bit Field Type
OPINDEX0, OPINDEX1, OPINDEX2, OPINDEX3
OPINDEX0, OPINDEX1, OPINDEX2, OPINDEX3
None
None
None
Enumeratio NORMAL(Normal n Type ), FORCE(Force) NORMAL, FORCE
None
None
None
BYCICRANGE(B Y CIC RANGE), Enumeratio BYCICVALUE(B BYCICRANGE, n Type Y CIC VALUE) BYCICVALUE
None
None
None
BYTSRANGE(BY TS RANGE), Enumeratio BYTSVALUE(BY BYTSRANGE, n Type TS VALUE) BYTSVALUE
None
None
None
BYTSRANGE(BY TS RANGE), Enumeratio BYTSVALUE(BY BYTSRANGE, n Type TS VALUE) BYTSVALUE
None
None
None
BYCICRANGE(B Y CIC RANGE), Enumeratio BYCICVALUE(B BYCICRANGE, n Type Y CIC VALUE) BYCICVALUE
None
None
None
String Type None
0~255 characters
None
None
None
SysOpt(System optimization), OSubcell(Overlai d subcell), USubcell(Underla id subcell), Enumeratio NoPrefer(No SysOpt, OSubcell, n Type preference) USubcell, NoPrefer
None
SysOpt
SysOpt
Interval Type
0~63
0~63
dB
35
35
Interval Type
0~255
0~255
bit
63
63
L0(Level0), L1(Level1), L2(Level2), L3(Level3), L4(Level4), L5(Level5), Enumeratio L6(Level6), n Type L7(Level7)
L0, L1, L2, L3, L4, L5, L6, L7
None
L0
L0
Enumeratio n Type SDH, SONET
SDH, SONET
None
None
None
MANUAL(MANU AL), FORCED(FORC ED), MANUAL, Enumeratio CLEARALARMA( FORCED, n Type CLEARALARMA) CLEARALARMA
None
None
None
FORBID(Forbid), Enumeratio RESTORE(Resto n Type re) FORBID, RESTORE None
None
None
Interval Type
0~4
0~4
None
None
None
Interval Type
0~7
0~7
None
None
None
One_touch(execu te on all boards in Enumeratio all subracks), One_touch, n Type Step_by_Step Step_by_Step
None
Step_by_Step
Step_by_Step
String Type None
1~200 characters
None
None
None
Interval Type
0~36
0~36
None
Interval Type
0~63
0~63
dB
20
20
NO, YES
None
YES
YES
Interval Type
500~60000
500~60000
ms
10000
10000
Interval Type
500~60000
500~60000
ms
10000
10000
NO, YES
None
NO
NO
Interval Type
0~100
0~100
per cent
80
80
Interval Type
0~50
0~50
15
15
Interval Type
0~63
0~63
dB
25
25
NO, YES
None
YES
YES
Interval Type
1~255
1~255
Interval Type
1~255
1~255
Interval Type
0~63
0~63
dB
Interval Type
Bit Field Type
0~100 TS0, TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
0~100
per cent
50
50
TS0, TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None
None
None
Interval Type
0~335
0~335
None
None
None
Interval Type
0~15
0~15
None
None
None
Interval Type
0~31
0~31
None
None
None
Enumeratio HIGH(High), n Type LOW(Low)
HIGH, LOW
None
HIGH
HIGH
HIGH, LOW
None
HIGH
HIGH
HIGH, LOW
None
HIGH
HIGH
HIGH, LOW
None
HIGH
HIGH
Interval Type
10~2000
1.0~200.0 (step: 0.1) W
None
None
Interval Type
300~530
30.0~53.0 (step: 0.1) dB
None
None
Enumeratio 0_1dB(0.1dB), n Type 0_1W(0.1W)
0.1dB, 0.1W
None
None
None
Interval Type
0~100
0~100
per cent
90
90
NO, YES
None
YES
YES
Interval Type
0~27
0~27
None
None
None
Interval Type
0~27
0~27
None
None
None
Interval Type
0~11
0~11
None
None
None
NO, YES
None
NO
NO
NO, YES
None
NO
NO
CLOSE, OPEN
None
CLOSE
CLOSE
Interval Type
1~60
1~60
15
15
Interval Type
0~255
0~255
None
None
None
Interval Type
10~3500
10~3500
mA
320
320
Interval Type
10~3500
10~3500
mA
320
320
Interval Type
10~3500
10~3500
mA
185
185
Interval Type
10~3500
10~3500
mA
280
280
Interval Type
10~3500
10~3500
mA
280
280
Interval Type
10~3500
10~3500
mA
155
155
Interval Type
100~10000
100~10000
ms
1500
1500
Interval Type
100~10000
100~10000
ms
1500
1500
Interval Type
1~255
1~255
15
15
Interval Type
400~700
580
580
Interval Type
50~95
50~95
per cent
90
90
Interval Type
50~95
50~95
per cent
85
85
Interval Type
50~95
50~95
per cent
80
80
Interval Type
50~95
50~95
per cent
75
75
NO, YES
None
NO
NO
None
NO
NO
Interval Type
10~65535
10~65535
None
180
180
Interval Type
0~255
0~255
ms
255
255
Interval Type
10~65535
10~65535
None
220
220
Interval Type
1~8
1~8
None
Pan_0(0), Pan_1(1), Pan_2(2), Pan_3(3), Pan_4(4), Pan_5(5), Pan_6(6), Enumeratio Pan_7(7), n Type 255(not use)
Pan_0, Pan_1, Pan_2, Pan_3, Pan_4, Pan_5, Pan_6, Pan_7, 255
None
Pan_1
Pan_1
None
Pan_2
Pan_2
None
Pan_20
Pan_20
L0(Level0), L1(Level1), L2(Level2), L3(Level3), L4(Level4), L5(Level5), Enumeratio L6(Level6), n Type L7(Level7)
L0, L1, L2, L3, L4, L5, L6, L7
None
L0
L0
Interval Type
0~9999
0~9999
None
None
None
Interval Type
0~99
0~99
None
None
None
ENABLED(Enabl ed), Enumeratio DISABLED(Disab ENABLED, n Type led) DISABLED
None
DISABLED
DISABLED
Interval Type
0~65535
0~65535
None
None
None
Interval Type
0~65535
0~65535
None
None
None
Interval Type
0~255
0~25.5, step:0.01
dB
79
79
Enumeratio NO(No), n Type YES(Yes) QoS(QoS), BE(BE), AF11(AF11), AF12(AF12), AF13(AF13), AF21(AF21), AF22(AF22), AF23(AF23), AF31(AF31), AF32(AF32), AF33(AF33), AF41(AF41), AF42(AF42), Enumeratio AF43(AF43), n Type EF(EF)
NO, YES
None
NO
NO
QoS, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF
None
None
QoS
MAINCPU_PATC H(Main programme patch), DSP_PATCH(DS P programme patch), UCODE_PATCH( MAINCPU_PATCH, Enumeratio Marcrocode DSP_PATCH, n Type patch) UCODE_PATCH None
None
None
DB0(0dB), DB2(2dB), DB4(-4dB), DB6(-6dB), DB8(8dB), DB10(10dB), DB12(12dB), DB14(14dB), DB16(16dB), DB18(18dB), DB20(20dB), DB22(22dB), DB24(24dB), DB26(26dB), DB28(Enumeratio 28dB), DB30(n Type 30dB)
DB0, DB2, DB4, DB6, DB8, DB10, DB12, DB14, DB16, DB18, DB20, DB22, DB24, DB26, DB28, DB30 dB
DB2
DB2
NO, YES
None
YES
YES
Interval Type
1~32
0.5~16, step:0.5
Interval Type
0~127
0~127
dB
In densely populated urban areas, the recommended value is 68; in the suburbs, the recommended value is 68 72.
Interval Type
1~32
0.5~16, step:0.5
Interval Type
0~65535
0~65535
None
Interval Type
1~15
ms
Enumeratio BCCH(BCCH), n Type PDCH(PDCH)
BCCH, PDCH
None
PDCH
PDCH
Interval Type
0~31
0~31
None
None
None
Interval Type
0~31
0~31
None
None
None
Interval Type
0~31
0~31
None
None
None
Interval Type
0~31
0~31
None
None
None
NO, YES
None
NO
NO
Interval Type
10~160
10~160
None
80
80
NO, YES
None
NO
NO
NO, YES
None
NO
NO
Interval Type
10~70
10~70
None
70
70
Interval Type
1~10
1~10
0~65534
0~65534
None
None
None
0~65534
0~65534
None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
Interval Type
0~2047
0~2047
None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
255.255.255.255 255.255.255.255
Interval Type
1024~65535
1024~65535
None
None
None
String Type None
1~63 characters
None
None
None
NO, YES
None
YES
YES
Interval Type
0~255
0~255
10
10
Interval Type
0~63
0~63
None
30
30
Interval Type
0~255
0~255
255
255
Interval Type
1~60
1~60
Interval Type
1~48
15~720, step:15
min
None
None
Enable
Enable
None
Enable
Enable
NO, YES
None
YES
YES
Enumeratio NO(No Support), n Type YES(Support) NO, YES
None
NO
NO
Interval Type
0~2
0~2
None
Interval Type
10~1000
10~1000
None
660
660
Interval Type
10~2000
10~2000
None
660
660
Interval Type
100~600000
100~600000
ms
1000
1000
BE(BE), AF11(AF11), AF12(AF12), AF13(AF13), AF21(AF21), AF22(AF22), AF23(AF23), AF31(AF31), AF32(AF32), AF33(AF33), AF41(AF41), AF42(AF42), Enumeratio AF43(AF43), n Type EF(EF) BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF
None
None
None
Bit Field Type
BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, , AF43, EF None
None
None
NO, YES
None
YES
YES
DISABLE(Disable d), Enumeratio ENABLE(Enabled n Type ) DISABLE, ENABLE None
None
None
Interval Type
5~64
5~64
None
10
10
64~1024
64~1024
byte
128
128
2~1500
2~1500
byte
None
None
Interval Type
24~1031
24~1031
byte
1031
1031
NO, YES
None
NO
None
Interval Type
20~1500
20~1500
byte
56
56
Interval Type
95~512
95~512
byte
128
128
0_level(0_level), 1_level(1_level), 2_level(2_level), 3_level(3_level), 4_level(4_level), 5_level(5_level), 6_level(6_level), 7_level(7_level), 8_level(8_level), 9_level(9_level), 10_level(10_level ), 11_level(11_level ), 12_level(12_level ), 13_level(13_level ), 14_level(14_level ), Enumeratio 16_level(16_level n Type ), nouse(no use)
0_level, 1_level, 2_level, 3_level, 4_level, 5_level, 6_level, 7_level, 8_level, 9_level, 10_level, 11_level, 12_level, 13_level, 14_level, 16_level, no use
None
12_level
12_level
Interval Type
0~50
0~10, step:0.2
dB
None
13_level
13_level
None
14_level
14_level
Interval Type
0~50
0~10, step:0.2
dB
None
16_level
16_level
Interval Type
0~50
0~10, step:0.2
dB
Interval Type
1~100
100~10000, step:100
ms
10
10
Interval Type
0~1000 A(A Interface), Enumeratio ABIS(Abis n Type Interface)
0~1, step:0.001
None
30
30
A, ABIS
None
None
None
OFF, ON
None
None
None
Interval Type
0~600
0~600
None
None
Interval Type
30~100
30~100
per cent
60
60
Interval Type
30~100
30~100
per cent
60
67
Interval Type
1~8
50~400, step: 50
ms
Interval Type
2~15
2~15
None
CLOSE(Forced turn-off), OPEN(Forced turn-on), Enumeratio AUTO(Selfn Type adaptive)
CLOSE, OPEN, AUTO
None
OPEN
OPEN
Interval Type
30~100
30~100
per cent
50
50
Interval Type
30~100
30~100
per cent
50
62
Enumeratio n Type ON, OFF Interval Type Interval Type
ON, OFF
None
ON
ON
0~11
0~11
None
None
None
1~32
1~32
None
None
None
Interval Type
0~3
0~3
None
None
None
Interval Type
0~335
0~335
None
None
None
Interval Type
0~335
0~335
None
None
None
Interval Type
0~335
0~335
None
None
None
Interval Type
0~335
0~335
None
None
None
Interval Type
0~335
0~335
None
None
None
Interval Type
0~7
0~7
None
None
None
Interval Type
0~335
0~31(PEUa/EIUa), 0~62(E1 of OIUa), 0~83(T1 of OIUa), 0~251(E1 of POUc), 0~335(T1 of POUc) None 0~31(PEUa/EIUa), 0~62(E1 of OIUa), 0~83(T1 of OIUa), 0~251(E1 of POUc), 0~335(T1 of POUc) None 0~31(PEUa/EIUa), 0~62(E1 of OIUa), 0~83(T1 of OIUa), 0~251(E1 of POUc), 0~335(T1 of POUc) None
None
None
Interval Type
0~335
None
None
Interval Type
0~335
None
None
0~7
0~7
None
None
None
0~11
0~11
None
None
None
Interval Type
0~7
0(OIUa), 0~3(POUc) None
None
None
Interval Type
0~7
0~7
None
None
None
Interval Type
0~11
0~7(FG2a), 0~1(GOUa), 0~11(FG2c), 0~3(GOUc)
None
None
None
Interval Type
0~11
0~11 0~7(FG2a), 0~1(GOUa), 0~11(FG2c), 0~3(GOUc)
None
None
None
Interval Type
0~11
None
None
None
Interval Type
0~335
0~335
None
None
None
Interval Type
0~31
0~31
None
None
None
Interval Type
0~335
0~335
None
None
None
Interval Type
0~335
0~335
None
None
None
Interval Type
0~355
0~355
None
None
None
Interval Type
0~255
0~255
None
None
None
Interval Type
0~23
0~23
None
None
None
Interval Type
0~23
0~23
None
None
None
Interval Type
0~335
0~335
None
None
None
Interval Type
0~1
0~1
None
None
None
0~1
0~1
None
None
None
0~255
0~255
None
None
None
Interval Type
250~650
250~650
None
650
650
Interval Type
6~120
6~120
None
16
16
Interval Type
6~120
6~120
None
NotSupport(Not Enumeratio Support), n Type Support(Support) NotSupport, Support None
Support
Support
Interval Type
0~9
0~9
None
Interval Type
0~9
0~9
None
String Type None
0~250 characters
None
None
None
String Type None
1~250 characters
None
None
None
Interval Type
21~65535
21~65535
None
None
None
Interval Type
0~1
0~1
None
None
None
0~1
0~1
None
None
None
0~15
0~15
None
None
None
Interval Type
1~16
1~16
None
16
16
Enumeratio n Type IP, HDLC
IP, HDLC
None
None
None
CLOSE, OPEN
None
CLOSE
None
Enumeratio n Type ETHER, TRUNK ETHER, TRUNK
None
None
None
TOPEXTOUTPO RT(TOP Extended Out Port), TOPEXTINPORT Enumeratio (TOP Extended TOPEXTOUTPORT, n Type In Port) TOPEXTINPORT None
None
None
BCCHNorm(BCC HNorm), Enumeratio BCCHExt(BCCH BCCHNorm, n Type Ext) BCCHExt
None
BCCHNorm
BCCHNorm
BYBTSTYPE(By Enumeratio BTS Type), BYBTSTYPE, n Type BYBTS(By BTS) BYBTS
None
None
None
Interval Type
1~1000
0.1~100.0 (step: 0.1) kVA
125
125
Enumeratio CLOSE(Close), n Type OPEN(Open) Enumeratio CLOSE(Close), n Type OPEN(Open) Enumeratio CLOSE(Close), n Type OPEN(Open) Enumeratio CLOSE(Close), n Type OPEN(Open) Enumeratio CLOSE(Close), n Type OPEN(Open) Enumeratio CLOSE(Close), n Type OPEN(Open)
CLOSE, OPEN
None
CLOSE
None
CLOSE, OPEN
None
CLOSE
None
CLOSE, OPEN
None
CLOSE
None
CLOSE, OPEN
None
CLOSE
None
CLOSE, OPEN
None
CLOSE
None
CLOSE, OPEN
None
CLOSE
None
Interval Type
0~1000
0~1000
None
100
100
Interval Type
0~50
0~10, step: 0.2
dB
Interval Type
0~50
0~10, step: 0.2
dB
POWER_48_24( 48/24 Power Module), POWER_240_24 Enumeratio (240/24 Power POWER_48_24, n Type Module) POWER_240_24 220VAC(220V AC), N48VDC(48V DC), Enumeratio P24VDC(+24V n Type DC)
None
POWER_48_24 POWER_48_24
220VAC, N48VDC, P24VDC
None
220VAC
220VAC
Interval Type
0~13
0~13
None
80W(80W), 63W(63W), 60W(60W), 55W(55W), 50W(50W), 45W(45W), 40W(40W), 31W(31W), 30W(30W), 27W(27W), 26W(26W), 25W(25W), 24W(24W), 21W(21W), 20W(20W), 19W(19W), 18W(18W), 17W(17W), 16W(16W), 15W(15W), 14W(14W), 13_3W(13.3W), 13W(13W), 12_5W(12.5W), 12W(12W), 11_5W(11.5W), 11W(11W), 10W(10W), 9_5W(9.5W), 9W(9W), 8_5W(8.5W), 8W(8W), Enumeratio 7_5W(7.5W), n Type 7W(7W),
80W, 63W, 60W, 55W, 50W, 45W, 40W, 31W, 30W, 27W, 26W, 25W, 24W, 21W, 20W, 19W, 18W, 17W, 16W, 15W, 14W, 13_3W, 13W, 12_5W, 12W, 11_5W, 11W, 10W, 9_5W, 9W, 8_5W, 8W, 7_5W, 7W, 6_5W, 6W, 5_5W, 5W, 4_5W, 4W, 3_7W, 3_1W, 3W, 2_5W, 2W, 200mW, DEFAULT None
DEFAULT
None
Interval Type
0~100
0~100
per cent
10
10
Interval Type
0~100
0~100
per cent
Interval Type
0~499
0~499
None
None
None
0~499
0~499
None
None
None
0~499
0~499
None
None
None
Interval Type
0~15
0~15
None
None
None
None
Disable
Disable
Interval Type
0~5
0~5
None
YES, NO
None
NO
NO
NOT_ALLOWED( Not Allowed), Enumeratio ALLOWED(Allow ALLOWED, n Type ed) NOT_ALLOWED
None
NOT_ALLOWE D
NOT_ALLOWED
OFF, ON
None
OFF
OFF
Interval Type
1~255
1~255
None
Interval Type
0~255
0~255
None
60
60
0(No packet access), 3(Packet access of level 1), 4(Packet access of levels 12), 5(Packet access of levels 13), 6(Packet Enumeratio access of level 1n Type 4) 0, 3, 4, 5, 6
None
NO, YES
None
NO
NO
NO, YES
None
NO
NO
Interval Type
30~100
30~100
per cent
60
60
Interval Type
30~100
30~100
per cent
60
72
Interval Type
30~100
30~100
per cent
50
50
Interval Type
30~100
30~100
per cent
50
65
ON, OFF
None
ON
ON
PRIOR-1(Priority1), PRIOR2(Priority-2), PRIOR-3(Priority3), PRIOR4(Priority-4), PRIOR-5(Priority5), PRIOR6(Priority-6), PRIOR-7(Priority7), PRIOR8(Priority-8), PRIOR-9(Priority9), PRIOR10(Priority-10), PRIOR11(Priority-11), PRIOR12(Priority-12), PRIOR13(Priority-13), PRIOR14(Priority-14), PRIOR15(Priority-15), Enumeratio PRIORn Type 16(Priority-16)
PRIOR-1, PRIOR-2, PRIOR-3, PRIOR-4, PRIOR-5, PRIOR-6, PRIOR-7, PRIOR-8, PRIOR-9, PRIOR10, PRIOR-11, PRIOR-12, PRIOR13, PRIOR-14, PRIOR-15, PRIOR16 None
None
None
Prior-1, Prior-2, Prior-3, Prior-4, Prior-5, Prior-6, Prior-7, Prior-8, Prior-9, Prior-10, Prior-11, Prior-12, Enumeratio Prior-13, Prior-14, n Type Prior-15, Prior-16
Prior-1, Prior-2, Prior3, Prior-4, Prior-5, Prior-6, Prior-7, Prior8, Prior-9, Prior-10, Prior-11, Prior-12, Prior-13, Prior-14, Prior-15, Prior-16 None
Prior-1
Prior-1
Interval Type
0~100
0~100
per cent
80
80
0(0), 1(1), 2(2), 3(3), 4(4), 5(5), Enumeratio 6(6), 7(7), n Type nouse(no use)
0, 1, 2, 3, 4, 5, 6, 7, no use
None
Interval Type
0~99
0~99
None
Interval Type
0~99
0~99
None
Enumeratio n Type HIGH, LOW
HIGH, LOW
None
None
None
TDME1_O(TDM E1 0 Port), TDME1_1(TDM E1 1 Port), FE_E(FE Electric Port), FE_O(FE TDME1_O, Enumeratio Optical Port), TDME1_1, FE_E, n Type IPOE(IP over E1) FE_O, IPOE
None
None
None
Enumeratio n Type 1(1), 2(2)
1, 2
None
None
None
TDME1_O(TDM E1 0 Port), TDME1_1(TDM E1 1 Port), FE_E(FE Electric Port), FE_O(FE TDME1_O, Enumeratio Optical Port), TDME1_1, FE_E, n Type IPOE(IP over E1) FE_O, IPOE
None
None
None
String Type None
0~200 characters
None
None
None
DEFAULT(Defaul t Sequence), CUSTOMIZDE(C ustomized Sequence), DEFAULT, Enumeratio DISABLE(DISAB CUSTOMIZDE, n Type LE) DISABLE
None
None
None
ITUT(ITUT), Enumeratio ANSI(ANSI), n Type TTC(TTC)
ITUT, ANSI, TTC
None
ITUT
ITUT
Enumeratio Q933(Q933), n Type ANSI(Ansi)
Q933, ANSI
None
Q933
Q933
Interval Type
5~300
5~300
15
15
Interval Type
0~255
0~255
min
Interval Type
60~3600
60~3600
300
300
ALL(Select all ports), Enumeratio SINGLE(Select n Type one port) ALL(Select all ports), Enumeratio SINGLE(Select n Type one port)
ALL, SINGLE
None
None
ALL
ALL, SINGLE
None
None
None
ALL(Select all E1/T1 ports), PORT(Select all E1/T1 ports of one channelized optical port), Enumeratio SINGLE(Select n Type one E1/T1 port)
ALL, PORT, SINGLE
None
None
ALL
None
OFF
OFF When "Mode Control" is set to "Common User Mode", the recommended value is OFF; when "Mode Control" is set to "Specified User Mode", the recommended value is ON.
None
OFF
None
ON
ON
None
OFF
When "Mode Control" is set to "Common User Mode", the recommended value is OFF; when "Mode Control" is set to "Specified User Mode", the recommended value is ON.
None
ON
ON
Interval Type
0~100
0~100
per cent
100
100
Interval Type
0~100
0~100
per cent
100
100
None
NO
NO
None
None
When the interface type is Abis, the parameter is AF43.
Interval Type
0~7
0~7
None
None
Interval Type
0~7
0~7
None
Interval Type
1~16
1~16
None
NO, YES
None
NO
NO
None
None
When the interface type is Abis, transmission type is IP, the parameter is AF33.
Interval Type
0~7
0~7
None
None
Interval Type
0~7
0~7
None
Interval Type
0~63
0~63
None
25
25
COMMONUSRM( Common User Mode), Enumeratio SPECUSRM(Spe COMMONUSRM, n Type cified User Mode) SPECUSRM
None
None
None
Interval Type
-121~-104
-121~-104
dBm
-109
-109
Interval Type
-121~-104
-121~-104
dBm
-109
-109
OFF, ON
None
ON
ON
Interval Type
10~10000
10~10000
None
500
500
Interval Type
100~600000
100~600000
ms
1000
1000
NO, YES
None
YES
YES
NO, YES
None
YES
YES
NO, YES
None
YES
For "Power System Type" is "APM30" or "EPS4815", the recommended value is "NO". For other types of Power System, the recommended value is "YES".
NO, YES
None
YES
YES
NO, YES
None
YES
YES
NO, YES
None
YES
YES
NO, YES
None
YES
YES
NO, YES
None
YES
YES
NO, YES
None
YES
YES
Interval Type
0~63
0~63
None
35
35
NO, YES
None
None
None
ON, OFF
None
None
None
Enumeratio BOOL(BOOL), n Type VALUE(VALUE)
BOOL, VALUE
None
None
None
Interval Type
123~65534
123~65534
None
None
None
Interval Type
0~31
0~31
GB_OVER_FR(G b over FR), Enumeratio GB_OVER_IP(G GB_OVER_FR, n Type b over IP) GB_OVER_IP Enumeratio BOOL(BOOL), n Type VALUE(VALUE)
None
None
None
BOOL, VALUE
None
BOOL
BOOL
B8ZS(B8ZS), HDB3(HDB3), AMI(AMI), Enumeratio AMI_ZCS(AMI_Z B8ZS, HDB3, AMI, n Type CS) AMI_ZCS E1_DOUBLE_FR AME(E1_DOUBL E_FRAME), E1_CRC4_MULT I_FRAME(E1_CR C4_MULTI_FRA ME), T1_SUPER_FRA ME(T1_SUPER_ FRAME), T1_EXTENDED_ SUPER_FRAME( Enumeratio T1_EXTENDED_ n Type SUPER_FRAME) E1_DOUBLE_FR AME(E1_DOUBL E_FRAME), E1_CRC4_MULT I_FRAME(E1_CR C4_MULTI_FRA ME), T1_SUPER_FRA ME(T1_SUPER_ FRAME), T1_EXTENDED_ SUPER_FRAME( Enumeratio T1_EXTENDED_ n Type SUPER_FRAME)
None
None
None
E1_DOUBLE_FRA ME, E1_CRC4_MULTI_F RAME, T1_SUPER_FRAM E, T1_EXTENDED_SU PER_FRAME None
None
None
None
None
E1_DOUBLE_FR AME(E1_DOUBL E_FRAME), E1_CRC4_MULT I_FRAME(E1_CR C4_MULTI_FRA ME), T1_SUPER_FRA ME(T1_SUPER_ FRAME), T1_EXTENDED_ SUPER_FRAME( Enumeratio T1_EXTENDED_ n Type SUPER_FRAME)
None
E1_CRC4_MULTI_FR AME
Interval Type
0~15
0~15
None
None
None
Enumeratio n Type FE, GE
FE, GE
None
None
None
APM100(APM10 0), APM200(APM20 0), APM30(APM30), EPS4890(EPS48 90), EPS4815(EPS48 15), SC48200~5||(SC 48200)$$(SC482 00)** CUSTOM(SC482 00)** CUSTOM~100||( Enumeratio )$$(C n Type USTOM)
APM100, APM200, APM30, EPS4890, EPS4815, SC48200, CUSTOM None
None
None
String Type None
0~200 characters
None
None
None
String Type None
1~50 characters
None
None
None
String Type None
1~50 characters
None
None
None
Interval Type Password Type
1~65535
1~65535
ms
500
500
None
0~64 characters
None
None
None
Password Type
None
1~32 characters
None
None
None
Password Type
None
1~32 characters
None
None
None
6~32
6~32 characters
None
None
None
0~31
0~31
None
None
None
Bit Field Type
BIT0, BIT1, BIT6, BIT7, BIT8, BIT9, BIT14, BIT15, BIT16, BIT17, BIT22, BIT23, BIT24, BIT25, BIT29, BIT30, BIT31
BIT0, BIT1, BIT6, BIT7, BIT8, BIT9, BIT14, BIT15, BIT16, BIT17, BIT22, BIT23, BIT24, BIT25, BIT29, BIT30, BIT31 None
None
None
Bit Field Type
BIT0, BIT1, BIT2, BIT3, BIT4, BIT5, BIT6, BIT7, BIT8, BIT9, BIT10, BIT11, BIT12
BIT0, BIT1, BIT2, BIT3, BIT4, BIT5, BI16, BIT7, BIT8, BIT9, BIT10, BIT11, BIT12 None
None
None
NO, YES
None
NO
NO
NO, YES
None
NO
NO
PWR2(Power control II), Enumeratio PWR3(Power n Type controlIII)
PWR2, PWR3
None
PWR3
PWR3
Interval Type
0~3
0~3
None
NO, YES
None
YES
YES
OnlyCurPwrLoc( Only Current Working Location TRXes be Turned On), ALLPwrLoc(All Enumeratio Location TRXes OnlyCurPwrLoc, n Type be Turned On) ALLPwrLoc
None
ALLPwrLoc
ALLPwrLoc
CLASS0(Class0), Enumeratio CLASS1(Class1), CLASS0, CLASS1, n Type CLASS2(Class2) CLASS2
None
None
None
Interval Type
0~720
0~720
min
NO, YES
None
YES
YES
DB0(0.0dB), DB2(-0.2dB), DB4(-0.4dB), DB6(-0.6dB), DB8(-0.8dB), DB10(-1.0dB), DB12(-1.2dB), DB14(-1.4dB), DB16(-1.6dB), Enumeratio DB18(-1.8dB), n Type Default(Default)
DB0, DB2, DB4, DB6, DB8, DB10, DB12, DB14, DB16, DB18, Default None
Default
Default
OFF, ON
None
OFF
OFF
OFF, ON
None
OFF
OFF
OFF, ON
None
OFF
OFF
Interval Type
0~63
0~63
None
None
None
Interval Type
0~63
0~63
None
None
None
Interval Type
0~63
0~63
None
None
None
Interval Type
0~63
0~63
None
None
None
Interval Type
0~63
0~63
None
None
None
Use_Qsearch_I( Enumeratio Use Qsearch_I), n Type Always(Always)
Use_Qsearch_I, Always
None
Use_Qsearch_I
Use_Qsearch_I
NO, YES
None
NO
Set this parameter to YES only in special scenarios such as highways.
Interval Type
1~10
1~10
None
Interval Type
0~255
0~255
15
15
Interval Type
1~10
1~10
None
Interval Type
0~15
-98, -94, -90, -86, 82, -78, -74, (always), -78, -74, 70, -66, -62, -58, 54, Positive infinity(never)
None
15
15
Interval Type
1~32
Interval Type
1~32
None
NO
NO
Interval Type
0~15
None
15
15
Interval Type
0~15
None
15
15
Enumeratio NO(Close), n Type YES(Open)
NO, YES
None
NO
NO
Interval Type
1~16
1~16
Interval Type
1~16
1~16
NONE(None), DYNAMIC(Dyna Enumeratio mic power n Type sharing)
NONE, DYNAMIC
None
NONE
NONE
Interval Type
3~20
3~20
None
Interval Type
3~20
3~20
None
Interval Type
0~4
0~4
dB
NO, YES
None
NO
NO
NO, YES
None
NO
NO
Bit Field Type
AU0, AU1, AU2, AU3, AU4, AU5, AU6, AU7
None
AU0-0&AU10&AU2-0&AU30&AU4-0&AU50&AU6-0&AU7-0
AU0-0&AU1-0&AU20&AU3-0&AU40&AU5-0&AU60&AU7-0
NO, YES
None
NO
NO
INSIDE_100AH(1 00AH Inside Storage Battery), INSIDE_50AH(50 AH Inside Storage Battery), OUTSIDE_300A H(300AH Outside Storage Battery), OUTSIDE_400A H(400AH Outside Storage Battery), OUTSIDE_500A H(500AH Outside Storage Battery), OUTSIDE_650A H(650AH Outside Storage Battery), OUTSIDE_200A Enumeratio H(200AH Outside n Type Storage Battery)
INSIDE_100AH, INSIDE_50AH, OUTSIDE_300AH, OUTSIDE_400AH, OUTSIDE_500AH, OUTSIDE_650AH, OUTSIDE_200AH
None
INSIDE_50AH
INSIDE_50AH
007C(0.07C), Enumeratio 010C(0.10C), n Type 015C(0.15C)
007C, 010C, 015C
None
015C
015C
INSIDE_BATTER Y(Inside Storage Battery), OUTSIDE_BATT INSIDE_BATTERY, Enumeratio ERY(Outside OUTSIDE_BATTER n Type Storage Battery) Y None
INSIDE_BATTE RY INSIDE_BATTERY
Bit Field Type
None
NO, YES
None
NO
NO
None
INSIDE_50AH
INSIDE_50AH
007C, 010C, 015C
None
015C
015C
Bit Field Type
None
NO, YES
None
NO
NO
None
INSIDE_50AH
INSIDE_50AH
007C, 010C, 015C
None
015C
015C
Interval Type
0~255
0~255
None
Interval Type
0~255
0~255
None
Interval Type
0~255
0~255
None
0 None
Interval Type
0~255
0~255
None
None
None
Interval Type
0~255
0~255
None
None
None
Interval Type
0~255
0~255
None
None
None
Interval Type
-121~-104
-121~-104
dBm
-109
-109
Interval Type
0~63
0~63
dB
16
16
Interval Type
0~65535
0~65535
None
5000
5000
Interval Type
-121~-104
-121~-104
dBm
-109
-109
Interval Type
0~7
0~7
None
NO, YES
None
YES
YES
Interval Type
0~255
0~255
None
225
225
0dB(0dB), 2dB(2dB), 4dB(4dB), 6dB(6dB), 8dB(8dB), 10dB(10dB), 12dB(12dB), Enumeratio 14dB(14dB), n Type nouse(no use) 10M(10M), Enumeratio 100M(100M), n Type AUTO(Auto)
0dB, 2dB, 4dB, 6dB, 8dB, 10dB, 12dB, 14dB, no use dB
2dB
2dB
10M, 100M, AUTO
None
100M
100M
ALG1(Algorithm I), Enumeratio ALG2(Algorithm n Type II), NONE(None) ALG1, ALG2, NONE None
ALG1
ALG1
DISABLE
DISABLE
Interval Type
1~255
1~255
None
LASTRBP(last rollbackpoint), APPOINTRBP(ap Enumeratio pointed LASTRBP, n Type rollbackpoint) APPOINTRBP
None
None
None
REC_ALL(Recor d All), REC_ERR(Recor d Errors), REC_ALL, Enumeratio REC_NON(Recor REC_ERR, n Type d None) REC_NON
None
None
REC_ALL
Interval Type
0~249
0~249
None
None
None
Interval Type
0~249
0~249
None
None
None
Interval Type
0~249
0~249
None
None
None
INDEPENDENT(I ndependent Receiver), DIVIDING(Dividin g Receiver), FOURDIVERSIT Y(Four Diversity Receiver), MAINDIVERSITY Enumeratio (Main Diversity), n Type NONE(None)
INDEPENDENT, DIVIDING, FOURDIVERSITY, MAINDIVERSITY, NONE
None
NONE
NONE
Interval Type
0~100
0~100
None
96
96
NO, YES
None
YES
YES
Same_Band(Sam e Band), Enumeratio Diff_Band(Differe Same_Band, n Type nt Band) Diff_Band
None
Diff_Band
Diff_Band
Interval Type
0~70
0~70
None
50
50
Interval Type
0~70
0~70
None
40
40
Interval Type
0~63
0~63
dB
Interval Type
0~63
0~63
dB
30
30
NO, YES
None
YES
YES
NO, YES
None
NO
NO
Interval Type
20~99
20~99
None
30
30
Interval Type
0~70
0~70
None
60
60
NO, YES
None
NO
NO
Enumeratio YES(YES), n Type NO(NO)
YES, NO
None
None
None
Interval Type
0~50
0~50
ms
10
10
Interval Type
0~768
0~768
None
Interval Type
0~31
0~31
None
0 None
Interval Type
0~31
0~31
None
None
None
Interval Type
0~31
0~31
None
0 None
Interval Type
0~31
0~31
None
0 None
Enumeratio OFF(OFF), n Type ON(ON) Enumeratio OFF(OFF), n Type ON(ON)
OFF, ON
None
OFF
None
OFF, ON
None
OFF
None
NO, YES
None
NO
NO
Interval Type
0~95
0~95
None
None
None
Compound Type
hour, min, sec
00:00:00~23:59:59
None
None
None
Interval Type
1~3600
1~3600
600 None
REHOSTRIGHT NOW(ReHostRig htNow), REHOSTDELAY( ReHostDelay), Enumeratio REHOSTWHEN( n Type ReHostWhen)
REHOSTRIGHTNO W, REHOSTDELAY, REHOSTWHEN None
REHOSTDELAY REHOSTDELAY
NO, YES
None
None
NO
Interval Type
0~62
0~62
None
None
None
NO, YES
None
NO
NO
OFF(OFF), POWERSHARIN G(Power Sharing Between Boards), RF_FH(RF Frequency OFF, Enumeratio Hopping Between POWERSHARING, n Type Boards) RF_FH None
OFF
OFF
Interval Type
0~23
0~23
None
None
None
Interval Type
0~255
0~255
None
None
None
Enumeratio A(A), B(B), n Type NONE(NONE)
A, B, NONE
None
NONE
NONE
String Type None
1~31 characters
None
None
None
String Type None
1~250 characters
None
None
None
Interval Type
0~1023
0~1023
None
None
None
Interval Type
0~65535
0~65535
None
None
None
NO, YES
None
NO
NO
Interval Type
0~7
0~7
None
NO, YES
None
NO
NO
NO, YES
None
NO
NO
NO, YES
None
YES
YES
Interval Type
0~63
0~63
None
Interval Type
1~10
1~10
Interval Type
1~32
1~32
None
10
10
Interval Type
1~32
1~32
None
Interval Type
0~8
0~8
None
Interval Type
0~16
0~16
None
NO, YES
None
NO
NO
Interval Type
0~65535
0~65535
min
Interval Type
1~60
1~60
min
None
None
Interval Type
1~255
1~255
None
Interval Type
1~15
1~15
min
None
None
Interval Type
1~120 MSLOST(RADIO _STS_MS_LOST ), QUALITYBAD(R ADIO_STS_QUA LITY_BAD), CELLRESELECT (RADIO_STS_C Enumeratio ELL_RESELECT n Type )
1~120
10
10
MSLOST, QUALITYBAD, CELLRESELECT
None
None
None
NO, YES
None
YES
YES
NO, YES
None
NO
None
Interval Type
2~5
2~5
Interval Type
2~5 Noneed, Manually, Reset, Normally, Correlative, Configuration, Expired
2~5 Noneed, Manually, Reset, Normally, Correlative, Configuration, Expired
Bit Field Type
None
None
None
Interval Type
0~86400
0~86400
30
30
Interval Type
0~190
0~190
None
Interval Type
0~21
0~21
None
Interval Type
0~255
0~255
10
10
Interval Type
1~100
1~100
None
1 None
NO, YES
None
NO
NO
Enumeratio RGPS(RGPS), n Type GPS(GPS)
RGPS, GPS
None
GPS
GPS
None
NO
NO
Bit Field Type
None
None
None
1920~30720, step: 480
ms
52_Times
52_Times
STANDALONET C(Stand Alone TC ), MASTERINPOO LTC(Master in Pool TC), SLAVEINPOOLT Enumeratio C(Slave in Pool n Type TC)
STANDALONETC, MASTERINPOOLT C, SLAVEINPOOLTC
None
STANDALONET C STANDALONETC
Interval Type
0~4095
0~4095
None
None
None
Interval Type
0~16,255
0~16, 255
None
255
255
Interval Type
0~16
0~16
None
None
None
String Type None
1~64 characters
None
None
None
String Type None
0~200 characters
None
None
None
Interval Type
1~100
1~100
None
None
None
Interval Type
1~100
1~100
None
None
None
DISABLE(Disable ), ENABLE(Enable) , Enumeratio UNSUPPORT(Un DISABLE, ENABLE, n Type support) UNSUPPORT None
DISABLE
DISABLE
0.48sec(0.48sec), 0.96sec(0.96sec), 1.92sec(1.92sec), 3.84sec(3.84sec), 7.68sec(7.68sec), 15.36sec(15.36se c), 30.72sec(30.72se c), Enumeratio 61.44sec(61.44se n Type c)
0.48sec, 0.96sec, 1.92sec, 3.84sec, 7.68sec, 15.36sec, 30.72sec, 61.44sec s
15.36sec
15.36sec
0.48sec(0.48sec), 0.96sec(0.96sec), 1.92sec(1.92sec), 3.84sec(3.84sec), 7.68sec(7.68sec), 15.36sec(15.36se c), 30.72sec(30.72se c), Enumeratio 61.44sec(61.44se n Type c)
0.48sec, 0.96sec, 1.92sec, 3.84sec, 7.68sec, 15.36sec, 30.72sec, 61.44sec s
0.96sec
0.96sec
Interval Type
20~99
20~99
None
20
20
NO(Not report), Enumeratio YES(Report), n Type NONE(None)
NO, YES, NONE
None
NO
NO
Interval Type
0~31
ms
Interval Type
0~31
ms
Interval Type
0~2047
0~2047
None
None
None
Enumeratio n Type SHARE(SHARE) SHARE
None
None
None
Enumeratio SHARE, n Type EXCLUSIVE
SHARE, EXCLUSIVE
None
None
None
Interval Type
0~255
0~255
Interval Type
0~63
0~63
dB
Interval Type
0~63
0~63 BASIS_OF_B1, BASIS_OF_B2 BASIS_OF_B1, BASIS_OF_B2
dB
30
30
Enumeratio BASIS_OF_B1, n Type BASIS_OF_B2 Enumeratio BASIS_OF_B1, n Type BASIS_OF_B2
None
None
None
None
None
None
MINUS_52db(52db), MINUS_48db(48db), MINUS_44db(44db), MINUS_40db(40db), MINUS_36db(36db), MINUS_32db(32db), MINUS_28db(28db), MINUS_24db(24db), MINUS_20db(20db), MINUS_16db(16db), MINUS_12db(12db), MINUS_10db(10db), MINUS_8db(8db), MINUS_6db(6db), MINUS_4db(4db), MINUS_2db(2db), Enumeratio Zerodb(0db), n Type 2db(2db),
MINUS_52db, MINUS_48db, MINUS_44db, MINUS_40db, MINUS_36db, MINUS_32db, MINUS_28db, MINUS_24db, MINUS_20db, MINUS_16db, MINUS_12db, MINUS_10db, MINUS_8db, MINUS_6db, MINUS_4db, MINUS_2db, Zerodb, 2db, 4db, 6db, 8db, 10db, 12db, 16db, 20db, 24db, 28db, 32db, 36db, 40db, 44db, 48db, no use
dB
MINUS_2db
MINUS_2db
Interval Type
0~64
0~64
kbit/s
None
None
Interval Type
0~63
0~63
None
None
None
Interval Type
0~7
0~7
None
None
None
Interval Type
0~64
0~64
kbit/s
None
None
2~4094
2~4094
None
None
None
0~96
0~96
None
COMMISSIONIN G(Commissioning ), UPGRADE(Upgr ade), COMMISSIONING, Enumeratio RESTORE(Resto UPGRADE, n Type re) RESTORE None
None
None
Interval Type
0~127
0~127
dB
Set this parameter to about 68 in densely populated urban areas and about 72 in 68 suburban areas.
String Type None
1~63 character
None
None
None
String Type None
1~50 characters
None
None
None
OFF, ON
None
OFF
OFF
Interval Type
1~65535
1~65535
ms
3000
3000
Interval Type
0~190
0~190
None
OFF, ON
None
None
None
Interval Type
0~4294967295
0~4294967295
None
None
None
OFF, ON
None
None
None
OFF, ON
None
None
None
OFF, ON
None
None
None
OFF, ON
None
None
None
OFF, ON
None
None
None
Interval Type
0~4294967295
0~4294967295
None
None
None
Interval Type
0~4294967295
0~4294967295
None
None
None
Interval Type
0~4294967295
0~4294967295
None
None
None
Interval Type
0~3
0~3
None
NONREVERTIVE(NO N-REVERTIVE), Enumeratio REVERTIVE(RE NON-REVERTIVE, n Type VERTIVE) REVERTIVE
None
None
None
Interval Type
0~4294967295
0~4294967295
None
4294967295
4294967295
Interval Type
1~5
1~5
per cent
Enumeratio OFF(Close), n Type ON(Open) IP Address Type IP Address Type
OFF, ON
None
ON
ON
None
0.0.0.0~255.255.255 .255 None 0.0.0.0~255.255.255 .255 None
None
None
None
None
None
Interval Type
0~15
0~15
None
None
None
Interval Type
0~100
0~100
per cent
12
12
Interval Type
0~100
0~100
per cent
25
25
Interval Type
500~60000
500~60000
ms
1000
1000
Interval Type
500~60000
500~60000
ms
3000
3000
Interval Type
500~60000
500~60000
ms
1000
1000
DISABLE
DISABLE
Interval Type
10~80
10~80
None
30
30
NEXTHOP(Next Enumeratio Hop), OUTIF(Out n Type Interface) NEXTHOP, OUTIF
None
None
None
Interval Type
0~1000
0~1000
None
Interval Type
1~100
1~100
None
0~999
0~999
None
None
None
1~3000000
1~3000000
kbit/s
None
None
Interval Type
0~4000000
0~4000000
kbit/s
None
None
Interval Type
0~63
0~63
None
Interval Type
0~70
0~70
None
Interval Type
0~63
0~63
dB
8 In dual-band networking mode for densely populated urban areas, the level drops rapidly due to multiple barriers. The propagation loss of the 1800 MHz frequency band is greater than the propagation loss of the 900 MHz frequency band. Considering the preceding factors, you can set this parameter to YES for the DCS1800 cell. Under normal conditions, set this parameter to No.
NO, YES
None
NO
Interval Type
0~70
0~70
None
60
60
Interval Type
0~70
0~70
None
42
42
Interval Type
0~70
0~70
None
41
41
Interval Type
0~70
0~70
None
40
40
Interval Type
0~70
0~70
None
50
50
Interval Type
0~70
0~70
None
49
49
Interval Type
0~70
0~70
None
48
48
Interval Type
0~70
0~70
None
47
47
Interval Type
0~70
0~70
None
46
46
Interval Type
0~70
0~70
None
45
45
Interval Type
0~70
0~70
None
44
44
Interval Type
0~70
0~70
None
43
43
Interval Type
0~249
0~249
None
None
None
Interval Type
0~249
0~249
None
None
None
Interval Type
0~249
0~249
None
None
None
RXUNAME(By RXU Name), RXUPOS(By RXU Position Enumeratio No), SRNSN(By n Type Subrack No)
RXUNAME, RXUPOS, SRNSN
None
None
None
RXUNAME(RXU Name), RXUPOS(RXUP Enumeratio OS), RXUNAME, n Type SRNSN(SRNSN) RXUPOS, SRNSN
None
None
None
String Type None
1~64 characters
None
None
None
String Type None
1~64 characters
None
None
None
String Type None
1~64 characters
None
None
None
Interval Type
1~6
1~6
None
None
None
Interval Type
1~6
1~6
None
None
None
Interval Type
1~6
1~6
None
None
None
DRRU(DRRU), DRFU(DRFU), MRRU(MRRU), MRFU(MRFU), GRFU(GRFU), GRRU(GRRU), Enumeratio BTS3900E(BTS3 n Type 900E)
DRRU, DRFU, MRRU, MRFU, GRRU, GRFU, BTS3900E
None
None
None
OFF, ON
None
OFF
OFF
Interval Type
0~15
0~15
None
None
None
Bit Field Type
48VDISABLE, RES0, RES1, RES2, TSDISABLED, HSDISABLED, RES3, RES4
48VDISABLE, RES0, RES1, RES2, TSDISABLED, HSDISABLED, RES3, RES4
None
None
None
Bit Field Type
BT1_DISABLE, AH_DISABLE, AT1_DISABLE, AT2_DISABLE, BT2_DISABLE
BT1_DISABLE(0), AH_DISABLE(1), AT1_DISABLE(2), AT2_DISABLE(3), BT2_DISABLE(4)
None
None
None
NO, YES
None
NO
NO
NO, YES
None
NO
NO
Interval Type
0~2
0~2
None
Interval Type
0~4
0~4
None
Bit Field Type
T1_DISABLE, ET_DISABLE, ET1_DISABLE, ET2_DISABLE, T2_DISABLE
T1_DISABLE, ET_DISABLE, ET1_DISABLE, ET2_DISABLE, T2_DISABLE
None
None
None
Interval Type
0~2047
0~2047
None
None
None
BYNAME(By Enumeratio name), BYID(By n Type index)
BYNAME, BYID
None
BYNAME
BYNAME
Interval Type
1~16
1~16
None
Interval Type
0~100
0~100
per cent
50
50
String Type None
1~64 characters
None
None
None
Interval Type
0~63
0~30240, step: 480
ms
32
32
Bit Field Type
WATER_IMMER WATER_IMMERSE SED, SMOG, D, SMOG, GM_DISABLE GM_DISABLE None
None
None
Bit Field Type
WIDISABLE, SMDISABLE, IMDISABLE, GMDISABLE
WIDISABLE, SMDISABLE, IMDISABLE, GMDISABLE
None
None
None
Bit Field Type
WILOW, WILOW, SMLOW, SMLOW, IMLOW, IMLOW, GMLOW GMLOW,
None
None
None
NO, YES
None
None
None
Bit Field Type
WS_DISABLE, SS_DISABLE, GS_DISABLE
WS_DISABLE(0), SS_DISABLE(1), GS_DISABLE(2)
None
None
None
Interval Type
0~2047
0~2047
None
None
None
String Type None
1~64 characters
None
None
None
ADD0dB(+0dB), ADD10dB(+10dB ), Enumeratio Automatic(Autom ADD0dB, ADD10dB, n Type atic) Automatic None
ADD0dB
ADD0dB
Interval Type
0~63
0~63
None
38
38
Interval Type
1~20
ms
Interval Type
0~2047
0~2047
None
None
None
String Type None
1~64 characters
None
None
None
GERMAN(GERM AN), ENGLISH(ENGLI SH), ITALIAN(ITALIAN ), FRENCH(FRENC H), SPANISH(SPANI SH), DUTCH(DUTCH) , SWEDISH(SWE DISH), DANISH(DANISH ), PORTUGUESE( PORTUGUESE), FINNISH(FINNIS H), NORWEGIAN(N ORWEGIAN), GREEK(GREEK) , TURKISH(TURKI SH), HUNGARIAN(HU NGARIAN), POLISH(POLISH ), GB2312(GB2312 ), KOI8-R(Cyrillic Enumeratio KOI8-R), KOI8n Type U(Cyrillic KOI8Interval Type
GERMAN, ENGLISH, ITALIAN, FRENCH, SPANISH, DUTCH, SWEDISH, DANISH, PORTUGUESE, FINNISH, NORWEGIAN, GREEK, TURKISH, HUNGARIAN, POLISH, GB2312, KOI8-R, KOI8-U, KOI8, WINDOWS1251, ASMO_449, WINDOWS-1256, WINDOWS-874, WINDOWS-1253, WINDOWS-1254, WINDOWS-1255, WINDOWS-1257, WINDOWS-1250, WINDOWS-1252, BINARY, UCS2, RCS-1, RCS-2, RCS-3, RCS-4, RCS-5 None
None
ENGLISH
0~1
0~1
None
None
None
Any Type
None
Valid command string, without the ';'at the end of the string.
None
None
None
BYBTSID(By BTS ID), Enumeratio BYCELLID(By n Type Cell ID)
BYBTSID, BYCELLID
None
None
BYCELLID
Interval Type
0~23
0~23
None
None
None
Interval Type
0~511
0~511
None
None
Interval Type
1~2147483646
1~2147483646
None
Interval Type
0~1199
0~1199
None
None
None
Compound Type
2000-1-1~2037-12year, month, date 31
None
None
None
Compound Type
2000-1-1~2037-12year, month, day 31
None
None
None
Compound Type
2000-1-1~2037-12year, month, day 31
None
None
None
Interval Type
7~90
7~90
None
None
1E-3, 1E-4, 1E-5, Enumeratio 1E-6, 1E-7, 1E-8, 1E-3, 1E-4, 1E-5, 1En Type 1E-9 6, 1E-7, 1E-8, 1E-9 None Compound Type 2000-01-01~2050year, month, day 12-31
1.00E-06
1.00E-06
None
None
None
Interval Type
1~31
1~31
None
None
Interval Type
1~191
1~191
None
OFF, ON
None
OFF
OFF
Interval Type
0~100
0~10, step:0.1
10
10
Interval Type
0~63
0~63
dB
Interval Type
0~70
0~70
None
55
55
Interval Type
0~63
0~63
dB
Interval Type
0~70
0~70
None
55
55
NO, YES
None
YES
YES
Enumeratio DISABLE, n Type ENABLE
DISABLE, ENABLE None
None
DISABLE
OFF, ON
None
OFF
OFF
ENABLE
ENABLE
Interval Type
0~60
0~60
Interval Type
0~5
0~5
None
Interval Type
0~255
0~255
40
40
Interval Type
0~63
0~63
dB
30
30
Interval Type
0~63
0~63
None
48
48
Enumeratio HIGH(HIGH), n Type LOW(LOW)
HIGH, LOW
None
None
None
Interval Type
40~70
40~70
degree Celsius
53
53
Interval Type
0~65535
0~65535
None
None
Interval Type
0~65535
0~65535
None
None
Interval Type
350~556
35.0~55.6 (step: 0.1) V
None
If "Power System Type" is "SC48200", the recommended value is "460". Otherwise, the recommended value is "430".
NO, YES
None
YES
YES
String Type None
1~63 characters
None
None
None
NO, YES
None
YES
YES
NO, YES
None
NO
NO
NO, YES
None
NO
NO
NO, YES
None
NO
NO
NO, YES
None
YES
YES
NoPriority
NoPriority
NoPriority
NoPriority
NO, YES
None
None
None
NO, YES
None
NO
NO
NO, YES
None
YES
YES
NO, YES
None
YES
YES
Interval Type
0~6
0~6
None
None
None
SUPPORT(Supp ort), Enumeratio UNSUPPORT(No SUPPORT, n Type t Support) UNSUPPORT
None
UNSUPPORT
None
Interval Type
1024~65535
1000~65535
None
None
None
Interval Type
1024~65535
1000~65535
None
None
None
String Type None
1~17 characters
None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
SEPARATE(Sep arate), Enumeratio TOGETHER(Tog SEPARATE, n Type ether), AIP(AIP) TOGETHER, AIP TDM, HDLC, Enumeratio HDLC_HubBTS, TDM, HDLC, n Type IP HubBTS, IP
None
SEPARATE
SEPARATE
None
TDM
TDM
Enumeratio n Type TDM, HDLC, IP
TDM, HDLC, IP
None
None
None
SYSTEM(System Command), CONFIG(Configu ration Management), MAINTAIN(Maint enance Management), STAT(Statistic Measurement), SYSTEM, CONFIG, Enumeratio ALARM(Alarm MAINTAIN, STAT, n Type Management) ALARM None
None
None
OML(OML), RSL(RSL), EML(EML), ESL(ESL), CSVOICE(CS Voice), CSDATA(CS Data), PSHIGHPRI(PS High PRI), PSLOWPRI(PS Low PRI), Enumeratio OTHERDATA(Ot n Type her Data)
OML, RSL, EML, ESL, CSVOICE, CSDATA, PSHIGHPRI, PSLOWPRI, OTHERDATA
None
None
None
NO, YES
None
NO
NO
NO, YES
None
NO
NO
NO, YES
None
NO
NO
NO, YES
None
NO
NO
Interval Type
0~5
0~5
None
None
None
Interval Type
0~65535
0~65535
None
1800
1800
String Type None
1~20 characters
None
None
None
Interval Type
1~10
1~10
None
Interval Type
0~1023
0~1023
None
NO, YES
None
NO
NO
0( Release 98 or Enumeratio older), 1(Release Release 98 or older, n Type 99 onwards) Release 99 onwards None
Release 99 onwards
Release 99 onwards
UNISTALL(Uninst all), Enumeratio ALLOW(Allow), UNISTALL, ALLOW, n Type DENY(Deny) DENY None
ALLOW
ALLOW
Interval Type
50~95
50~95
per cent
75
75
Interval Type
0~27
0~27
None
None
None
NO, YES
None
NO
NO
unshielded(Unshi elded), Enumeratio shielded(Shielded n Type ) unshielded, shielded None
None
None
Interval Type
0~12
0~12
NO, YES
None
YES
YES
NO, YES
None
NO
NO
Interval Type
1~10
1~10
None
Interval Type
0~186
0~186
None
None
None
Interval Type
0~186
0~186
None
None
None
Interval Type
0~15
0~15
None
None
None
Interval Type
0~255
0~255
None
100
100
Interval Type
0~255
0~255
None
100
100
Interval Type
0~7
0~7
None
Interval Type
1~10
1~10
None
Interval Type
1~31
Interval Type
0~15
0~15
None
None
None
Interval Type
1~31
Interval Type
0~65535
0~65535
ms
3000
3000
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
Interval Type
0~65535
0~65535
None
None
None
Interval Type
0~255
0~255
None
255 None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
Interval Type
0~35
0~35
None
None
None
E1SELFLOOP(E 1 Self Loopback), IASUSELFLOOP( Enumeratio IASU Self E1SELFLOOP, n Type Loopback) IASUSELFLOOP
None
None
None
None
B0000
B0000
Interval Type
1~600
1~600
300
300
DATE(Input with date), WEEK(Input with week), DATEWEEK(Inpu Enumeratio t with date and DATE, WEEK, n Type week) DATEWEEK
None
None
None
Interval Type
0~3
0~3
None
None
None
NOTSUPPORT( Not Support), Enumeratio INNER(Inner), n Type OUTER(Outer) Enumeratio CLOSE(Close), n Type OPEN(Open) JAN(January), FEB(February), MAR(March), APR(April), MAY(May), JUN(June), JUL(July), AUG(August), SEP(September), OCT(October), Enumeratio NOV(November), n Type DEC(December)
NOTSUPPORT, INNER, OUTER
None
None
NOTSUPPORT
CLOSE, OPEN
None
OPEN
None
None
None
None
Interval Type
2~2000
2~2000
None
10
10
0~27
0~27
None
None
None
0~3,8~27
0~3, 8~27
None
None
None
Interval Type
0,2,4,8,10,12,14, 0, 2, 4, 8, 10, 12, 14, 16,18,20,22,24,2 16, 18, 20, 22, 24, 6 26 None
None
None
Interval Type
0,2,4,8,10,12,14, 0, 2, 4, 8, 10, 12, 14, 16,18,20,22,24,2 16, 18, 20, 22, 24, 6 26 None
None
None
Interval Type
0~5,8~27
0~5, 8~27
None
None
None
Interval Type
0~5,8~27
0~5, 8~27
None
None
None
Interval Type
0~27
0~27
None
None
None
Interval Type
0~27
0~27
None
None
None
Interval Type
0~27
0~27
None
None
None
Interval Type
0~5,8~27
0~5, 8~27
None
None
None
Interval Type
0,2,4,8,10,12,14, 0, 2, 4, 8, 10, 12, 14, 16,18,20,22,24,2 16, 18, 20, 22, 24, 6 26 None
None
None
Interval Type
0~27
0~27
None
None
None
Interval Type
0~27
{0~27}
None
None
None
Interval Type
0~23
0~23
None
None
None
Interval Type
0~23
0~23
None
Interval Type
0,2,4,8,10,12,14, 0, 2, 4, 8, 10, 12, 14, 16,18,20,22,24,2 16, 18, 20, 22, 24, 6 26 None
None
None
Interval Type
0~27
0~27
None
None
None
Interval Type
0~23
0~23
None
None
None
Interval Type
0~27
0~27
None
None
None
Interval Type
0~7
0~7
None
None
None
NOCOMB(No Combination), PBT(PBT), WBANDCOMB( Wideband Combination), DIVERSITY(Tran smit Diversity), DDIVERSITY(Dy namic Transmit Diversity), DPBT(DPBT), DTIC(Transmit Independency or Enumeratio Combination), n Type NONE(none)
NOCOMB, PBT, WBANDCOMB, DIVERSITY, DDIVERSITY, DPBT, DTIC, NONE None
NONE
NONE
SGL_ANTENNA( Single Feeder[1TX + 1RX]), SGLDOUBLE_A NTENNA(Single Feeder[1TX + 2RX]), DOUBLE_ANTE NNA(Double Feeder[2TX + 2RX]), DOUBLEFOUR_ ANTENNA(Doubl e Feeder[2TX + 4RX]), DOUBLESINGLE _ANTENNA(Dou ble Feeder[1TX + 1RX]), DOUBLEDOUBL E_ANTENNA(Do Enumeratio uble Feeder[1TX n Type + 2RX]) SGL_ANTENNA( Single Feeder[1TX + 1RX]), SGLDOUBLE_A NTENNA(Single Feeder[1TX + 2RX]), DOUBLE_ANTE NNA(Double Feeder[2TX + 2RX]), DOUBLEFOUR_ ANTENNA(Doubl e Feeder[2TX + 4RX]), DOUBLESINGLE _ANTENNA(Dou ble Feeder[1TX + 1RX]), DOUBLEDOUBL E_ANTENNA(Do Enumeratio uble Feeder[1TX n Type + 2RX])
SGL_ANTENNA, SGLDOUBLE_ANT ENNA, DOUBLE_ANTENN A, DOUBLEFOUR_AN TENNA, DOUBLESINGLE_A NTENNA, DOUBLEDOUBLE_ ANTENNA None
DOUBLE_ANTE NNA DOUBLE_ANTENNA
SGL_ANTENNA( Single Feeder[1TX + 1RX]), SGLDOUBLE_A NTENNA(Single Feeder[1TX + 2RX]), DOUBLE_ANTE NNA(Double Feeder[2TX + 2RX]), DOUBLEFOUR_ ANTENNA(Doubl e Feeder[2TX + 4RX]), DOUBLESINGLE _ANTENNA(Dou ble Feeder[1TX + 1RX]), DOUBLEDOUBL E_ANTENNA(Do Enumeratio uble Feeder[1TX n Type + 2RX]) SGL_ANTENNA( Single Feeder[1TX + 1RX]), SGLDOUBLE_A NTENNA(Single Feeder[1TX + 2RX]), DOUBLE_ANTE NNA(Double Feeder[2TX + 2RX]), DOUBLEFOUR_ ANTENNA(Doubl e Feeder[2TX + 4RX]), DOUBLESINGLE _ANTENNA(Dou ble Feeder[1TX + 1RX]), DOUBLEDOUBL E_ANTENNA(Do Enumeratio uble Feeder[1TX n Type + 2RX])
SGL_ANTENNA( Single Feeder[1TX + 1RX]), DOUBLESINGLE _ANTENNA(Dou ble Feeder[1TX + 1RX]), DOUBLEDOUBL E_ANTENNA(Do Enumeratio uble Feeder[1TX n Type + 2RX])
SGL_ANTENNA, DOUBLESINGLE_A NTENNA, DOUBLEDOUBLE_ ANTENNA None
SGL_ANTENNA SGL_ANTENNA
Interval Type
1~60
1~60
min
None
None
Interval Type
1~16777215
1~16383(BIT14), 1~65535(BIT16), 1~16777215(BIT24) None
None
None
BIT14(BIT14), Enumeratio BIT16(BIT16), n Type BIT24(BIT24)
BIT14, BIT16, BIT24 None
None
None
String Type None
1~11 characters
None
None
None
Interval Type
0~65535
0~65535
None
None
None
WNF(Whole Number Format), Enumeratio DNF(Divided n Type Number Format) WNF, DNF
None
WNF
WNF
Bit Field Type
L11_FORBID, L12_FORBID, L13_FORBID, L14_FORBID, L15_FORBID
L11_FORBID, L12_FORBID, L13_FORBID, L14_FORBID, L15_FORBID
None
L11_FORBID0&L12_FORBID0&L13_FORBID0&L14_FORBID0&L15_FORBID0
L11_FORBID0&L12_FORBID0&L13_FORBID0&L14_FORBID0&L15_FORBID-0
Bit Field Type
ET_DISABLE0, ET_DISABLE1, SMDISABLE, WIDISABLE, GMDISABLE, ARRESTER1, ARRESTER2
ET_DISABLE0, ET_DISABLE1, SMDISABLE, WIDISABLE, GMDISABLE, ARRESTER1, ARRESTER2
None
None
None
Bit Field Type
SMDISABLE, WIDISABLE, GMDISABLE, ARRESTER1, ARRESTER2
SMDISABLE, WIDISABLE, GMDISABLE, ARRESTER1, ARRESTER2
None
None
None
Interval Type
1~12
1~12, step: 5
min
12
12
NO, YES
None
YES
YES
NO, YES
None
YES
YES
NO, YES
None
YES
YES
NO, YES
None
NO
NO
PSMODE(Protoc ol Standard Mode), Enumeratio VGCSMODE(VG PSMODE, n Type CS Mode) VGCSMODE
None
PSMODE
PSMODE
PSMODE(Protoc ol Standard Mode), Enumeratio VGCSMODE(VG PSMODE, n Type CS Mode) VGCSMODE
None
PSMODE
PSMODE
Enumeratio FR(FR), n Type EFR(EFR)
FR, EFR
None
FR
FR
Enumeratio 1000M(1000M), n Type AUTO(AUTO)
1000M, AUTO
None
None
AUTO
Interval Type
0~63
0~63
dB
30
30
Interval Type
0~255
0~255
40
40
NO, YES
None
NO
NO
NOTSPPRTBC(N otSupport CB), SPPRTSTANDA RD(SupportStand ard CB), SPPRTSIMPLE( NOTSPPRTBC, Enumeratio SupportSimple SPPRTSTANDARD, n Type CB) SPPRTSIMPLE None
NOTSPPRTBC
NOTSPPRTBC
None
NO
NO
None
NO
NO
None
UNSUPPORT
None
None
UNSUPPORT
None
NO, YES
None
NO
NO
NO, YES
None
NO
NO
NO, YES
None
NO
NO
NO, YES
None
NO
NO
NO, YES
None
NO
NO
NO, YES
None
NO
NO
NO, YES
None
NO
NO
None
UNSUPPORT
None
NO, YES
None
NO
NO
Enumeratio YES(Support), n Type NO(Not Support) YES, NO
None
None
None
Interval Type
0~4
0~4
None
None
None
SUPPORT(Supp ort), Enumeratio NOT_SUPPORT( SUPPORT, n Type Not Support) NOT_SUPPORT
None
If the version of a GSM base station is BTS3000V100R009 or later, or if the version of a multi-mode 3900 series base station is V100R002 or later, the recommended value of this parameter is SUPPORT. Otherwise, the recommended value of this parameter is NOT_SUPPORT NOT_SUPPORT.
SUPPORT(Supp ort), Enumeratio NOT_SUPPORT( SUPPORT, n Type Not Support) NOT_SUPPORT
None
None
If the software version of the SingleRAN BTS is SRAN3.0 or later, the parameter Is support SRAN mode needs to be set to SUPPORT(Support). If the software version of the SingleRAN BTS is earlier than SRAN3.0, the parameter Is support SRAN mode needs to be set to NOT_SUPPORT(Not Support).
SUPPORT~1||( SRAN)$$(Supp ort SRAN)** NOT_SUPPORT( Support SRAN)** NOT_SUPPORT Enumeratio ~0||()$$(N SUPPORT, n Type ot Support) NOT_SUPPORT
None
NOT_SUPPORT NOT_SUPPORT
Interval Type
0~2047
0~2047
None
None
None
String Type None
1~64 characters
None
None
None
Interval Type
0~2047
0~2047
None
None
None
1~64 characters
None
None
None
0~65535
0~65535
None
None
None
String Type None
1~100 characters
None
None
None
Interval Type
1~4
1~4
None
None
None
Interval Type
1~4
1~4
None
None
None
HOALGORITHM 1(Handover algorithm I), HOALGORITHM Enumeratio 2(Handover HOALGORITHM1, n Type algorithm II) HOALGORITHM2
None
HOALGORITHM 1 HOALGORITHM1
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
Interval Type
1~65533,65535
1~65533, 65535
None
None
None
String Type None
1~3 characters
None
None
None
Interval Type
1~1000
1~1000
None
None
None
String Type None
1~3 characters
None
None
None
Interval Type
0~335
0~335
None
None
None
BITS12MHZ(2MHZ Building Integrated Timing Supply system 1), BITS22MHZ(2MHZ Building Integrated Timing Supply system 2), BITS12MBPS(2MBPS Building Integrated Timing Supply system 1), BITS22MBPS(2MBPS Building Integrated Timing Supply system 2), 8KHZ(8KHZ), GPS(Globe Positioning System), LINE1_8KHZ(8K HZ line1), LINE2_8KHZ(8K HZ line2), BITS1T1BPS(T1BPS Building Integrated Timing Supply system 1), Enumeratio BITS2n Type T1BPS(T1BPS TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
BITS1-2MHZ, BITS22MHZ, BITS12MBPS, BITS22MBPS, GPS, 8KHZ, LINE1_8KHZ, LINE2_8KHZ, BITS1-T1BPS, BITS2-T1BPS None
None
LINE1_8K and LINE2_8K are most commonly used.
Bit Field Type
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
1~11
1~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
0~11
0~11
None
None
None
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~254
0~254
None
None
None
Interval Type
0~254
0~254
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~254
0~254
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0 None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
1~249 characters
None
None
None
0~5
0~5
None
None
None
Enumeratio n Type MPS, EPS, TCS Enumeratio DES(Descent), n Type ASC(Ascent)
MPS, EPS, TCS
None
None
None
DES, ASC
None
DES
None
Interval Type
0~255
0~255
None
100
100
Interval Type
0~255
0~255
None
100
100
GSM_PRIOR(GS M Traffic Prior), Enumeratio UMTS_PRIOR(U GSM_PRIOR, n Type MTS Traffic Prior) UMTS_PRIOR
None
GSM_PRIOR
GSM_PRIOR
CSVOICE(CS Voice), CSDATA(CS Data), PSHIGHPRI(PS High PRI), Enumeratio PSLOWPRI(PS n Type Low PRI)
CSVOICE, CSDATA, PSHIGHPRI, PSLOWPRI
None
None
None
Interval Type
0~63
0~63
dB
63
63
Interval Type
20~99
20~99
per cent
75
75
Interval Type
30~100
30~100
per cent
85
85
Interval Type
20~99
20~99
per cent
80
80
Interval Type
30~100
30~100
per cent
85
80
Interval Type
1~32
Interval Type
1~32
Interval Type
0~7
0~7
None
None
None
Interval Type
0~7
0~7
None
None
None
Interval Type
1~2147483646
1~2147483646
None
None
None
Interval Type
0~63
0~63
dB
63
63
Compound Type
HOUR, MIN, SEC HOUR, MIN, SEC
None
None
None
Compound Type
2000-1-1 00:00:00~2037-1231 23:59:59
None
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
Compound Type
2000-1-1 00:00:00~2037-1231 23:59:59
None
None
None
Compound Type
hour, min, sec
00:00:00~23:59:59
None
None
None
Compound Type
hour, min, sec
00:00:00~23:59:59
None
None
None
Compound Type
1970-1-1 year, month, day, 00:00:00~2538-12hour, min, sec 31 23:59:59
None
None
None
Interval Type
1~65535
1~65535
None
None
None
NO, YES
None
YES
YES
NO, YES
None
YES
YES
Interval Type
0~65535
0~65535
None
None
None
Interval Type
0~65535
0~65535
None
None
None
Interval Type
1~31
1~31
None
None
None
Interval Type
-990~400
-99.0~40.0 (step: 0.1)
degree Celsius
-100
-100
JAN(Jan.), FEB(Feb.), MAR(Mar.), APR(Apr.), MAY(May), JUN(Jun.), JUL(Jul.), AUG(Aug.), SEP(Sep), OCT(Oct.), Enumeratio NOV(Nov.), n Type DEC(Dec)
None
None
None
NO, YES
None
YES
YES
NO, YES
None
YES
YES
0, 2, 4, 6
None
None
None
Interval Type
60~600
60~600
240
240
Compound Type
hour, min
00:00~23:59
None
None
None
Interval Type
8~255
8~255
None
None
None
1~31
1~31, step:8
None
None
None
1~31
1~31
None
None
None
None
ENABLED
ENABLED
None
DISABLED
DISABLED
Interval Type
0~65535
0~65535
None
None
None
Interval Type
0~62
0~62
None
None
None
Compound Type
2000-1-1~2037-12year, month, day 31
None
None
None
Interval Type
1~32
1~32
None
None
None
Enumeratio NO(NO), n Type YES(YES) Compound Type
NO, YES
None
NO
NO
hour, min, sec
00:00:00~23:59:59
None
None
None
NO, YES
None
NO
NO
OFF, ON
None
OFF
OFF
Interval Type
60~300
60~300
120
120
OFF, ON
None
OFF
OFF
Interval Type
0~23
0~23 HOUR{0~23}, MIN{0~59}, SEC{0~59}
None
None
None
Compound Type
hour, min, sec
None
None
None
Interval Type
0~23
0~23
None
None
None
Interval Type
0~254
0~254
None
None
None
Interval Type
0~7
0~7
None
None
None
Compound Type
hour, min, sec
00:00:00~23:59:59
None
None
None
Interval Type
1~31 BTS30(BTS30), BTS312(BTS312) , BTS3001C(BTS3 001C), BTS3001CP(BTS 3001CP), BTS3002C(BTS3 002C), BTS3012A(BTS3 012A), BTS3006A(BTS3 006A), BTS3012(BTS30 12), BTS3006C(BTS3 006C), BTS3002E(BTS3 002E), BTS3012AE(BTS 3012AE), BTS3012_II(BTS 3012 II), DBS3900_GSM( DBS3900 GSM), BTS3900_GSM( BTS3900 GSM), BTS3900A_GSM (BTS3900A GSM), DBS3036(DBS30 36), Enumeratio BTS3036(BTS30 n Type 36),
1~31
None
None
None
BTS30, BTS312, BTS3001C, BTS3001CP, BTS3002C, BTS3012A, BTS3006A, BTS3012, BTS3006C, BTS3002E, BTS3012AE, BTS3012_II, BTS3900_GSM, BTS3900A_GSM, BTS3036, BTS3036A, BTS3900L_GSM, BTS3900B_GSM, BTS3900E_GSM
None
None
None
Interval Type
1~15
1~15
None
None
None
Interval Type
1~15
1~15
None
None
None
String Type None
1~64 characters
None
None
None
Interval Type
16~1023
16~1023
byte
352
352
Interval Type
16~1023
16~1023
byte
352
352
1~50
1~50
None
None
None
1~124,128~189
1~124, 128~189
None
None
None
NO, YES
None
NO
NO
NO, YES
None
NO
NO
0, 2, 4, 6
None
None
None
Interval Type
0~65535
0~65535
None
None
None
NO, YES
None
YES
YES
NO, YES
None
NO
None
NO, YES
None
NO
None
NO, YES
None
NO
NO
NOTSUPPORT( Not Support), Enumeratio SUPPORT(Supp NOTSUPPORT, n Type ort) SUPPORT
None
None
UNSUPPORT
None
NOTSUPPORT( Not Support), Enumeratio SUPPORT(Supp NOTSUPPORT, n Type ort) SUPPORT
None
None
UNSUPPORT
None
NO, YES
None
NO
NO
None
NO
NO
None
NO
NO
T_12(12), T_15(15), T_20(20), T_30(30), T_41(41), T_55(55), T_76(76), T_109(109), Enumeratio T_163(163), n Type T_217(217)
T_12, T_15, T_20, T_30, T_41, T_55, T_76, T_109, T_163, T_217
None
T_20
T_20
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
Interval Type
0~65535
0~65535
None
None
None
None
CLOSE
None
ON, OFF
None
None
None
Enumeratio OFF(OFF), n Type ON(ON) Enumeratio CLOSE(Close), n Type OPEN(Open) Enumeratio ON(ON), n Type OFF(OFF)
OFF, ON
None
ON
ON
CLOSE, OPEN
None
None
None
ON, OFF
None
None
None
SUN(Sunday), MON(Monday), TUE(Tuesday), WED(Wednesda y), THU(Thursday), SUN, MON, TUE, Enumeratio FRI(Friday), WED, THU, FRI, n Type SAT(Saturday) SAT Enumeratio n Type CLOSE, OPEN Enumeratio ON(ON), n Type OFF(OFF)
None
None
None
CLOSE, OPEN
None
None
None
ON, OFF
None
None
None
ON, OFF
None
None
None
Enumeratio BFD_OFF(OFF), n Type BFD_ON(ON) BFD_OFF, BFD_ON None
None
None
NO, YES
None
None
None
CLOSE, OPEN
None
None
CLOSE
NO, YES
None
YES
YES
Interval Type
1~254
1~254
None
10
10
OFF, ON
None
OFF
OFF
Interval Type
0~4294967295
0~4294967295
None
OFF, ON
None
OFF
OFF
OFF, ON
None
OFF
OFF
OFF, ON
None
OFF
OFF
OFF, ON
None
OFF
OFF
OFF, ON
None
OFF
OFF
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
Interval Type
3~5
3~5
None
None
None
OFF, ON
None
ON
None
FIRST(First), SECOND(Secon d), THIRD(Third), FIRST, SECOND, Enumeratio FOURTH(Fourth) THIRD, FOURTH, n Type , LAST(Last) LAST
None
None
None
Interval Type
0~2500
0~2500
None
0 None
SyncCase1(Sync case 1), Enumeratio SyncCase2(Sync SyncCase1, n Type case 2) SyncCase2
None
None
None
AISS(Air Interface Software Sync), Enumeratio GPS(GPS n Type Synchronization) AISS, GPS CONSYN(Conse cutive Synchronizing), INTERSYN(Inter Enumeratio mittent CONSYN, n Type Synchronizing) INTERSYN
None
AISS
AISS
None
None
None
Interval Type
1~7
1~7
Interval Type
0~23
0~23
Interval Type
0~59
0~59
min
String Type None
1~250 characters
None
None
None
String Type None
1~250 characters
None
MBSC
None
Interval Type
0,8~11
0, 8~11
None
10
10
String Type None
1~250 characters
None
None
None
NO, YES
None
YES
YES
String Type None
1~250 characters
None
BSC
None
String Type None
1~250 characters
None
None
None
Interval Type
1000~30000
1000~30000
ms
3000
3000
Interval Type
1~60
1~60
Interval Type
30000~60000
30000~60000
ms
60000
60000
Interval Type
800~1500
800~1500
ms
1500
1500
Interval Type
800~1500
800~1500
ms
1500
1500
Interval Type
2000~3000
2000~3000
ms
3000
3000
Interval Type
800~1500
800~1500
ms
1500
1500
Interval Type
800~1200
800~1200
ms
1200
1200
Interval Type
1000~120000
1000~120000
ms
3000
3000
Interval Type
1~60
1~60
Interval Type
6~240
60~2400 (step: 10)
ms
Interval Type
1~255
5~1275, step: 5
ms
50
50
Interval Type
1~255
5~1275, step: 5
ms
50
50
Interval Type
1~255
10~2550, step: 10
ms
200
200
Interval Type
1~255
10~2550, step: 10
ms
60
60
Interval Type
1~255
10~2550, step: 10
ms
150
150
Interval Type
1~255
5~1275, step: 5
ms
60
60
Interval Type
1~255
5~1275, step: 5
ms
60
60
Interval Type
1~10
1~10
Interval Type
180000~360000
180000~360000
ms
360000
360000
Interval Type
180000~360000
180000~360000
ms
360000
360000
Interval Type
1400~2000
1400~2000
ms
2000
2000
Interval Type
1000~10000
1000~10000
ms
10000
10000
Interval Type
1~60
1~60
Interval Type
0~255
0~2550, step:10
ms
Interval Type
1~255
1~255
10
10
500ms(500ms), 1000ms(1000ms) , 1500ms(1500ms) , 2000ms(2000ms) , 2500ms(2500ms) , 3000ms(3000ms) , 3500ms(3500ms) Enumeratio , n Type 4000ms(4000ms)
500ms, 1000ms, 1500ms, 2000ms, 2500ms, 3000ms, 3500ms, 4000ms
ms
500ms
500ms
0ms(0ms), 80ms(80ms), 120ms(120ms), 160ms(160ms), 200ms(200ms), 500ms(500ms), 1000ms(1000ms) Enumeratio , n Type 1500ms(1500ms)
0ms, 80ms, 120ms, 160ms, 200ms, 500ms, 1000ms, 1500ms ms
500ms
500ms
Interval Type
0~255
0~1530, step: 6
min
20
20
Interval Type
5~30
5~30
10
10
Interval Type
800~1200
800~1200
ms
1200
1200
Interval Type
1000~10000
1000~10000
ms
5000
5000
Interval Type
800~1200
800~1200
ms
1200
1200
Interval Type
1000~30000
1000~30000
ms
1000
1000
Interval Type
800~1200
800~1200
ms
1200
1200
Interval Type
1000~10000
1000~10000
ms
3000
3000
Interval Type
1000~10000
1000~10000
ms
3000
3000
Interval Type
800~1200
800~1200
ms
1200
1200
Interval Type
1~31
NO, YES
None
NO
NO
NO, YES
None
YES
YES
Interval Type
0~255
0~255
bit
Interval Type
1~16
0.5~8, step:0.5
Interval Type
0~255
0~255
bit
255
255
Interval Type
0~255
0~255
Interval Type
1~31
Interval Type
0~7
0~7
None
None
None
Interval Type
1~16
0.5~0.8, step:0.5
Interval Type
0~255
0~255
bit
63
63
Interval Type
0~25
0~25
None
10
10
Interval Type
0~25
0~25
None
10
10
Interval Type
1~12
1~12
None
None
None
Interval Type
1~12
1~12
None
None
None
Interval Type
30~300
30~300
90
90
Interval Type
60~300
60~300
90
90
Interval Type
1~254
1~254
None
170
170
Interval Type
1000~10000
1000~10000
ms
4000
4000
Interval Type
0~500
0~500
mV
80
80
OFF, ON
None
ON
ON
NO, YES
None
NO
NO
Interval Type
0~100
0~100
per cent
60
60
Interval Type
0~1000
0~1000
per mill
40
40
Interval Type
0~63
0~63
dB
Interval Type
0~70
0~70
None
55
55
Interval Type
0~1000
0~1000
per mill
40
40
Interval Type
0~63
0~63
dB
Interval Type
0~70
0~70
None
55
55
Interval Type
0~60
0~60
Interval Type
0~10
0~10
None
NO, YES
None
YES
YES
Interval Type
1~600
1~600
60
60
OFF, ON
None
OFF
OFF
Interval Type
0~100
0~100
per cent
60
60
Interval Type
0~100
0~100
per cent
70
70
Interval Type
1~15
1~15
None
10
10
SEPERATE_PRI NCIPAL(Principal BSC), SEPERATE_SU BORDINATE(Su bordinate BSC), TOGETHER(BS C/TC Together), SEPERATE_BS Enumeratio C_INTERFACE( n Type BSC Interface)
SEPERATE_PRINC IPAL, SEPERATE_SUBO RDINATE, TOGETHER, SEPERATE_BSC_I NTERFACE None
None
None
None
DISABLE
Interval Type
0~62
0~62
None
None
None
Interval Type
0~335
0~335
None
None
None
Interval Type
0~4095
0~4095
None
None
None
Interval Type
0~5,8~27
0~5, 8~27
None
None
None
Interval Type
0~11
0~11
None
None
None
GTC(GTC), Enumeratio UTC(UTC), n Type ITC(ITC)
GTC, UTC, ITC
None
None
None
Enumeratio AUTO(Auto), n Type Manual(Manual)
AUTO, Manual
None
None
None
Enumeratio AUTO(Auto), n Type Manual(Manual)
AUTO, Manual
None
None
None
Interval Type
0~7
0~42, step: 6
dB
Interval Type
0~15
Negative infinity, 28~28, step: 4
dB
Interval Type
0~7
dB
Interval Type
0~1
0~1
None
0 None
Interval Type
0~16383
0~16383
None
NO, YES
None
NO
NO
NO, YES
None
NO
NO
Interval Type
0~63
0~63
None
10
10
Interval Type
0~127
0~127
None
None
None
Interval Type
0~127
0~127
None
None
None
NO, YES
None
NO
NO
Interval Type
0~1
0~1
None
None
None
Interval Type
0~100
0~100
per cent
20
20
Interval Type
0~100
0~100
per cent
15
15
Interval Type
0~5
0~5
None
None
None
Interval Type
0~5
0~5
None
None
None
Interval Type
0~127
0~127
None
63
63
CLOSE, OPEN
None
OPEN
None
String Type None
1~9 characters
degree Celsius
45 None
String Type None
1~9 characters
degree Celsius
0 None
Interval Type
-500~1000
-50.0~100.0 (step: 0.1)
degree Celsius
500
500
Interval Type
-490~1000
-49.0~100.0 (step: 0.1)
degree Celsius
500
500
Interval Type
-500~1000
-50.0~100.0 (step: 0.1)
degree Celsius
Interval Type
-500~990
-50.0~99.0 (step: 0.1)
degree Celsius
Interval Type
0~5000
0.0~500.0 (step: 0.1) mV
800
800
String Type None
1~64 characters
None
None
None
Interval Type
1~65535
1~65535
None
None
None
Interval Type
32768~65535
32768~65535
None
None
None
String Type None
1~64 characters
None
None
None
Interval Type
50~70
50~70
degree Celsius
65
65
Interval Type
-400~0
For EPS4815 boards, the value of this parameter is always "1". For other types of APMU boards, the recommended value is -100 "-100".
Interval Type
-400~0
-100
-100
NO, YES
None
YES
YES
Interval Type
1~255
1~255
30
30
Any Type
None
1~615 characters(GB2312, KOI8-R, KOI8-U, KOI8, WINDOWS1251, ASMO_449, WINDOWS-1256, WINDOWS-874, WINDOWS-1253, WINDOWS-1254, WINDOWS-1255, WINDOWS-1257, WINDOWS-1250, WINDOWS-1252, UCS2), 1~2462 characters(BINARY) , 1~1395 characters(others) None
None
None
OFF, ON
None
OFF
OFF
Interval Type
0~1023
0~1023
None
None
Interval Type
0~65535
0~65535
None
65535
65535
ACTIVE(Active OMU), Enumeratio STANDBY(Stand n Type by OMU) ACTIVE, STANDBY None Interval Type
None
None
0~255
0~255
None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
IP Address Type
None
0.0.0.0~255.255.255 .255 None
None
None
Interval Type
0~5,8~27
0~5, 8~27
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
5000~60000
5000~60000
ms
5000
5000
Interval Type
220~280
220~280
264
264
Interval Type
220~280
220~280
264
264
Interval Type
1~10
1~10
None
10
10
Interval Type
1~10
1~10
None
Interval Type
1~10
1~10
None
Interval Type
1~10
1~10
None
Interval Type
1~10
1~10
None
Interval Type
1~10
1~10
None
Interval Type
1~10
1~10
None
Interval Type
1~10
1~10
None
Interval Type
1~10
1~10
None
PERCENTAGE(P ercentage), Enumeratio BANDWIDTH(Ba PERCENTAGE, n Type nd Width) BANDWIDTH
None
None
None
Interval Type
1~15
1~15
min
Interval Type
0~63
0~63
dB
30
30
Interval Type
0~7
0~7
None
Interval Type
1~32
0.5~16, step:0.5
Interval Type
0~100
0~100
per cent
80
80
Interval Type
1~32
0.5~16, step:0.5
Interval Type
0~7
0~7
None
OFF, ON
None
OFF
OFF
Interval Type
0~63
0~63
dB
40
40
Interval Type
3~15
3~15
NOLIMIT(No Enumeratio Limit), n Type LIMIT(Limit) Compound Type Interval Type
NOLIMIT, LIMIT
None
NOLIMIT
NOLIMIT
HOUR, MIN, SEC 00:00:00~23:59:59
None
None
None
0,5~1440
0, 5~1440
min
None
None
Interval Type
0~255
0~255
10
10
Interval Type
0~255
0~255
10
10
Interval Type
0~255
0~255
10
10
Interval Type
200~10000
200~10000
ms
2000
2000
Interval Type
1~65535
1~65535
ms
3000
3000
Interval Type
1~3
1~3
Interval Type
1~10
1~10
Interval Type
1~20
1~20 (step: 1)
ms
Interval Type
0~255
0~255
10
10
Interval Type
1~1024
1~1024
None
NO(No), Enumeratio YES(Yes), n Type NULL(Null)
NO, YES, NULL
None
NO
NO
Interval Type
0~255
0~255
30
30
Interval Type
10~255
10~255
40
40
Interval Type
1~30
1~30
Interval Type
1~15
1~15
min
Interval Type
7~365
7~365
None
None
Interval Type
0~4294967295
0~4294967295
None
None
None
Interval Type
-99~70
-99~70
degree Celsius
45
45
Interval Type
-19~5
-19~5
degree Celsius
If "Power System Type" is "EPS4815", the recommended value is "0". For other types of Power System, the recommended value is -19 "-19".
Interval Type
-99~99
-99~99
degree Celsius
-20
-20
Compound Type
hour, min
00:00~23:59
None
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
Interval Type
14~163
14~163
None
None
None
0~163
0~163
None
None
None
1~120
1~120
min
None
None
Enumeratio NON_FDR(NON_ n Type FDR), FDR(FDR) NON_FDR, FDR
None
None
None
Interval Type
2~4
2~4
Interval Type
0~100
0~100
per cent
0 None
Interval Type
0~4294967294
0~4294967294
None
None
None
Interval Type
0~100
0~100
per cent
0 None
Interval Type
8000~12000
8000~12000
ms
12000
12000
Interval Type
30000~90000 30000~90000 ABLMSGTYPEP ARAS, ACALGOPARAS, ADMCTLPARAS, AICH, AMRCSQICOUN TPARAS, APN, BCH, CBSADDR, CBSCELLSAC, CELLACCESSCL ASSBARREDLIS T, CELLACCESSR ESTRICT, CELLACCESSR ESTRICTBARRE DPARA, CELLACTTIMEO FFSET, CELLAMRCPAR AS, CELLAMRCWBP ARAS, CELLBASICINFO , CELLBCCHMOD TIME, CELLBINDINFO, CELLCACLOAD BALANCINGPAR A, CELLCACPARA, Enumeratio CELLCBSDRXIN n Type FO, 0~276
ms
60000
60000
None
None
None
TRRS(Terrestrial Transmission), Enumeratio SATEL(Satellite n Type Transmission) TRRS, SATEL
None
TRRS
TRRS
TRRS(Terrestrial Transmission), Enumeratio SATEL(Satellite TRRS, n Type Transmission) SATEL
None
None
None
Interval Type
-120~-1,1~120
-120~-1, 1~120
min
None
None
Interval Type
0~7
0~7
None
Interval Type
0~62
0~62
None
None
None
Interval Type
0~23
0~23
None
None
None
Interval Type
0~254
0~254
None
None
None
NORMAL(TXT FORMAT), Enumeratio FORMAT(BIN n Type FORMAT)
NORMAL, FORMAT None
None
None
Interval Type
0~5
0~5
None
None
None
Interval Type
1~30
1~30
Interval Type
30~100
30~100
per cent
60
60
Interval Type
30~100
30~100
per cent
60
67
Interval Type
30~100
30~100
per cent
50
50
Interval Type
30~100
30~100
per cent
50
62
ON, OFF
None
ON
ON
Interval Type
1~255
1~255
None
Interval Type
1~255
1~255
None
M3UA_OVERRID E_MOD(Active/St andby Mode), M3UA_LOADSH Enumeratio ARE_MOD(Load n Type Sharing Mode)
M3UA_OVERRIDE_ MOD, M3UA_LOADSHAR E_MOD None
M3UA_LOADSH M3UA_LOADSHARE_ ARE_MOD MOD
TER_TRANS(Ter restrial Transmission), SAT_TRANS(Sat ellite Transmission), TER_AND_SAT_ Enumeratio TRANS(Terrestri n Type al and Satellite)
TER_TRANS, SAT_TRANS, TER_AND_SAT_TR ANS None
None
None
Interval Type
0~27
0~27
None
None
None
Enumeratio n Type IP(IP)
IP
None
None
None
Enumeratio IP(IP), n Type HDLC(HDLC)
IP, HDLC
None
None
None
IP(IP), Enumeratio HDLC(HDLC), n Type TDM(TDM)
IP, HDLC, TDM
None
None
None
Enumeratio n Type IP, HDLC, TDM Enumeratio n Type HDLC, IP
IP, HDLC, TDM
None
None
None
HDLC IP
None
None
None
NO, YES
None
NO
NO
NO, YES
None
NO
NO
NO, YES
None
NO
NO
NO, YES
None
NO
NO
ENABLE(Enable Trace Range Limit), DISABLE(Disable Enumeratio Trace Range n Type Limit) ENABLE, DISABLE h 5sec(5sec), 10sec(10sec), 15sec(15sec), 20sec(20sec), 30sec(30sec), 60sec(60sec), 120sec(120sec), Enumeratio 300sec(300sec), n Type nouse(no use)
None
None
5sec, 10sec, 15sec, 20sec, 30sec, 60sec, 120sec, 300sec, no use s
10sec
10sec
Interval Type
0~100
0~100 0~7(FG2a), 0~1(GOUa), 0~11(FG2c), 0~3(GOUc)
None
90
90
Interval Type
0~11
None
None
None
Interval Type
0~5,8~27
0~5, 8~27
None
None
None
Interval Type
0~11
0~7(FG2a), 0~1(GOUa), 0~11(FG2c), 0~3(GOUc)
None
None
None
Interval Type
0~163
0~163
None
None
None
Interval Type
0~199
0~199
None
Interval Type
0~199
0~199
None
Interval Type
10~199
10~199
None
None
None
Interval Type
0~199
0~199
None
Interval Type
0~199
0~199
None
Interval Type
0~199
0~199
None
Interval Type
0~199
0~199
None
None
OFF, ON
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
TRXAid_NotAllow (TRX Aiding Not Allowed), AllowReForbid(All owed & Recover Forbidden), AllowReImmed(Al lowed & Recover Immediately), AllowReCheckRe s(Allowed & Enumeratio Recover When n Type Chk Res) Interval Type
TRXAid_NotAllow, AllowReForbid, AllowReImmed, AllowReCheckRes
None
AllowReCheckR es AllowReCheckRes
5~10
5~10
None
None
Interval Type
0~63,255
0~63, 255
None
255
255
Interval Type
0~3071
0~3071
None
None
None
Interval Type
0~3071
0~3071
None
None
None
Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type Interval Type
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
0~3071
0~3071
None
None
None
String Type None
1~120 characters
None
None
None
Interval Type
0~3071
0~3071
None
None
None
Interval Type
0~63
0~63
None
None
None
Interval Type
0~71
0~71
None
None
None
Interval Type
0~8
0~8
None
None
None
Interval Type
0~7
0~7
None
None
None
Interval Type
0~7
0~7
None
None
None
Enumeratio NO(No), n Type YES(Yes) TRX(TRX), TRU(TRU/DTRU) , QTRU(QTRU), DRRU(DRRU), DRFU(DRFU), MRRU(MRRU), MRFU(MRFU), GRFU(GRFU), GRRU(GRRU), BTS3900B(BTS3 900B), Enumeratio BTS3900E(BTS3 n Type 900E)
NO, YES
None
YES
YES
TRX, TRU, QTRU, DRRU, DRFU, MRRU, MRFU, GRFU, GRRU, BTS3900B, BTS3900E
None
None
None
Interval Type
8~255
8~255
None
None
None
Interval Type
1~31
1~31, step:8
None
None
None
TS1(Time_slot_1) , TS2(Time_slot_2) , TS3(Time_slot_3) , TS4(Time_slot_4) , TS5(Time_slot_5) , TS6(Time_slot_6) , TS7(Time_slot_7) , TS8(Time_slot_8) , TS9(Time_slot_9) , TS10(Time_slot_ 10), TS11(Time_slot_ 11), TS12(Time_slot_ 12), TS13(Time_slot_ 13), TS14(Time_slot_ 14), TS15(Time_slot_ 15), TS16(Time_slot_ 16), Enumeratio TS17(Time_slot_ n Type 17), TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None
None
None
Bit Field Type
2~4294967294
None
None
None
Interval Type
1~31
1~31
None
None
None
Bit Field Type
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31 TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None
None
None
Bit Field Type
None
None
None
Bit Field Type
None
None
None
Interval Type
0~7
0~7
None
None
None
Interval Type
0~512
0~512
None
None
None
Enumeratio NO(No), n Type YES(Yes) Interval Type Interval Type
NO, YES
None
NO
NO
0~65535
0~65535
None
None
None
1~144
10~1440 (step: 10)
min
None
None
Interval Type
0~127
0~127
None
None
None
String Type None
1~50 characters
None
None
None
Bit Field Type
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31 TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None
None
None
Bit Field Type
None
None
None
Interval Type
0~23
0~23
None
None
None
Interval Type
1~31
1~31
None
None
None
Interval Type
0~7
0~7
None
Interval Type
0~50
0~50
0 If the board is configured with two to four TRXs, the recommended value of this parameter is 20. If the board is configured with five TRXs, the recommended value of this parameter is 50. If the board is configured with six TRXs, the 20 recommended value
Interval Type
0~65535
0~65535
ms
5000
5000
Close, Open
None
Open
Open
8K(8K), 16K(16K), Enumeratio 32K(32K), n Type 64K(64K)
8K, 16K, 32K, 64K
kbit/s
None
None
Interval Type
0~254
0~254
None
None
None
TRXLOOPBACK( TRX Loopback Test), CHLLOOPBACK( Channel Loopback Test), CHLCODEC(Spe ech codec Test), CPRILOOPBACK Enumeratio (CPRI Loopback n Type Test) Interval Type
TRXLOOPBACK, CHLLOOPBACK, CHLCODEC, CPRILOOPBACK
None
None
None
0~31
0~31
None
None
None
SIMPLETEST(Si mple Test), Enumeratio MANUALTEST(M SIMPLETEST, n Type anual Test) MANUALTEST
None
None
None
PIM(Passive Enumeratio Intermodulation n Type Test)
PIM
None
None
None
NO, YES
None
NO
NO
Enumeratio CHAIN(Chain), n Type RING(Ring)
CHAIN, RING
None
None
None
Interval Type
1~255
1~255
None
64
64
Interval Type
1~128
1~128
64
64
Interval Type
0~8
0~8
None
Compound Type
HOUR, MINUTE 00:00~23:59
None
0:00 None
Compound Type
HOUR, MINUTE 00:00~23:59
None
0:00 None
DISABLE(Disable ), ENABLE(Enable) , Enumeratio SLEEPING(Sleep DISABLE, ENABLE, n Type ing) SLEEPING None
None
DISABLE
Interval Type
0~100
0~100
per cent
80
80
Interval Type
40~79
40~79
degree Celsius
50
50
Interval Type
-99~99
-99~99
degree Celsius
68
68
Interval Type
1~60
1~60
Interval Type
1~60
1~60
10
10
Interval Type
1~60
1~60
Interval Type
1~60
1~60
min
10
10
Interval Type
1~60
1~60
min
Interval Type
1~60
1~60
Interval Type
1~60
1~60
TX_3(3), TX_4(4), TX_5(5), TX_6(6), TX_7(7), TX_8(8), TX_9(9), TX_10(10), TX_11(11), TX_12(12), TX_14(14), TX_16(16), TX_20(20), TX_25(25), Enumeratio TX_32(32), n Type TX_50(50)
TX_3, TX_4, TX_5, TX_6, TX_7, TX_8, TX_9, TX_10, TX_11, TX_12, TX_14, TX_16, TX_20, TX_25, TX_32, TX_50
None
TX_32
TX_32
Interval Type
0~10000
0~100 (step: 0.01)
Interval Type
0~10000
0~100 (step: 0.01)
Interval Type
0~10000
0~100 (step: 0.01)
Interval Type
0~10000
0~100 (step: 0.01)
Interval Type
0~10000
0~100 (step: 0.01)
Interval Type
0~10000
0~100 (step: 0.01)
Interval Type
0~10000
0~100 (step: 0.01)
0~10000
0~100 (step: 0.01)
1~3000000
1~3000000
kbit/s
None
None
Interval Type
0~4000000
0~4000000
kbit/s
None
None
Interval Type
200~10000
200~10000
ms
500
500
T_2(2), T_3(3), T_4(4), T_5(5), T_6(6), T_7(7), T_8(8), T_9(9), T_10(10), T_12(12), T_14(14), T_16(16), T_20(20), T_25(25), Enumeratio T_32(32), n Type T_50(50) Enumeratio n Type EPS, TCS
T_2, T_3, T_4, T_5, T_6, T_7, T_8, T_9, T_10, T_12, T_14, T_16, T_20, T_25, T_32, T_50 None
T_20
T_20
EPS, TCS
None
None
None
ANY_ERR_RET URN(Stop at Error), ANY_ERR_RETUR Enumeratio ALL_END_RETU N, n Type RN(Stop at End) ALL_END_RETURN None
None
ANY_ERR_RETURN
GSM900, DCS1800, GSM900_DCS18 00, GSM850, PCS1900, Enumeratio GSM850_1800, n Type GSM850_1900
GSM900, DCS1800, GSM900_DCS1800, GSM850, PCS1900, GSM850_1800, GSM850_1900 None
None
None
OUTER(External PCU), Enumeratio INNER(Built-in n Type PCU) OUTER, INNER
None
INNER
None
GSM900, DCS1800, Enumeratio GSM850, n Type PCS1900
GSM900, DCS1800, GSM850, PCS1900 None
None
None
BTS30(BTS30), BTS312(BTS312) , BTS3001C(BTS3 001C), BTS3001CP(BTS 3001CP), BTS3002C(BTS3 002C), BTS3012A(BTS3 012A), BTS3006A(BTS3 006A), BTS3012(BTS30 12), BTS3006C(BTS3 006C), BTS3002E(BTS3 002E), BTS3012AE(BTS 3012AE), BTS3012_II(BTS 3012 II), DBS3900_GSM( DBS3900 GSM), BTS3900_GSM( BTS3900 GSM), BTS3900A_GSM (BTS3900A GSM), DBS3036(DBS30 36), Enumeratio BTS3036(BTS30 n Type 36),
BTS30, BTS312, BTS3001C, BTS3001CP, BTS3002C, BTS3012A, BTS3006A, BTS3012, BTS3006C, BTS3002E, BTS3012AE, BTS3012_II, DBS3900_GSM, BTS3900_GSM, BTS3900A_GSM, DBS3036, BTS3036, BTS3036A, BTS3900B_GSM, BTS3900E_GSM, BTS3900_GSM_6R FC, BTS3900A_GSM_6 RFC, BTS3036_6RFC, BTS3036A_6RFC, APM30, TMC, BBC, APM100, APM200, PS4890, OMB, RFC6, BTS3900, BTS3900L, BTS3900AL, BTS3900AS, BTS3900B, BTS3900E, None
None
None
GSM900(GSM90 0), Enumeratio DCS1800(DCS18 n Type 00) GSM900, DCS1800 None
None
None
Interval Type
0~15
0~15
None
NO, YES
None
None
None
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
None
None
None
Interval Type
0~1,255
0~1, 255
None
None
None
Interval Type
0~23,255
0~23, 255
None
None
None
Interval Type
0~53,255
0~53, 255
None
None
None
Interval Type
0~15
0~15
None
NO, YES
None
None
None
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
None
None
None
Interval Type
0~1,255
0~1, 255
None
None
None
Interval Type
0~23,255
0~23, 255
None
None
None
Interval Type
0~53,255
0~53, 255
None
None
None
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
10
10
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
15
15
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
15
15
Interval Type
0~15
0~15
None
13
13
Interval Type
0~15
0~15
None
13
13
OFF, ON
None
OFF
OFF
NO, YES
None
NO
NO
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
10
10
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
15
15
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
15
15
Interval Type
0~15
0~15
None
13
13
Interval Type
0~15
0~15
None
13
13
OFF, ON
None
OFF
OFF
Enumeratio NORTPCOMP, n Type RTPCOMP
NORTPCOMP, RTPCOMP
None
None
None
Enumeratio NORTPCOMP, n Type RTPCOMP
NORTPCOMP, RTPCOMP
None
None
None
Interval Type
1214~2001, 1214~2001,2005 2005~3783, ~3783,3786~478 3786~4783, 3,4785~65000 4785~65000
None
None
None
Interval Type
0~65535
0~65535
None
None
None
Administrators(Ad ministrator), Operators(Operat or), Users(User), Guests(Guest), Administrators, Enumeratio Customs(Custom Operators, Users, n Type ) Guests, Customs
None
Guests
Guests
Interval Type
0~99
0~99
None
80
80
Interval Type
0~64
0~64
None
64
64
Interval Type
300~1000
300~1000
ms
1000
1000
String Type None
0~9 Characters
None
90 None
String Type None
1~8 characters
None
None
None
Interval Type
0~255
TCH:480~122400, step:480; SDCCH:470~11985 0, step:470 ms
Interval Type
1~30
1~30
dB
14
14
Interval Type
1~30
1~30
dB
14
14
Interval Type
1~30
1~30
dB
16
16
Interval Type
1~30
1~30
dB
16
16
Interval Type
1~8
0.5~4, step:0.5
Interval Type
1~8
0.5~4, step:0.5
Interval Type
1~255
1~255
None
Interval Type
0~240
0~240
ms
In Abis over TDM transmission, the recommended value is 180; in Abis over IP transmission, the recommended value is 180 200.
Interval Type
1~64
1~64
None
15
15
Interval Type
0~63
0~63
dB
10
10
Interval Type
1~64
1~64
None
20
20
Interval Type
1~64
1~64
None
32
32
Interval Type
1~10
1~10
None
Interval Type
1~30
1~30
dB
16
16
Interval Type
1~30
1~30
dB
16
16
Interval Type
1~30
1~30
dB
18
18
Interval Type
1~30
1~30
dB
18
18
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
15
15
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
Interval Type
1~100
1~100
None
90
90
Interval Type
1~20
ms
Interval Type
1~30
1~30
dB
Interval Type
1~30
1~30
dB
Interval Type
1~100
1~100
None
100
100
Interval Type
0~3
0~3
None
Interval Type
0~7
0~7
None
Interval Type
0~7
0~7
None
Interval Type
1~20
ms
Interval Type
0~7
0~7
None
Interval Type
0~63
0~63
dB
Interval Type
0~70
0~70
None
55
55
Interval Type
0~70
0~70
None
60
60
Interval Type
0~70
0~70
None
55
55
Interval Type
0~10
0~10
None
Interval Type
0~19
ms
Interval Type
0~63
0~63
dB
18
18
Interval Type
0~63
0~63
dB
18
18
Interval Type
1~20
ms
Interval Type
0~10
0~10
None
Interval Type
0~19
ms
Interval Type
1~20
ms
Interval Type
0~100
0~100
None
Interval Type
0~100
0~100
None
75
75
Interval Type
0~63
0~63
dB
30
30
Interval Type
0~63
0~63
dB
18
18
Interval Type
0~63
0~63
dB
15
15
Interval Type
0~63
0~63
dB
19
19
Interval Type
0~63
0~63
dB
28
28
Interval Type
0~63
0~63
dB
23
23
Interval Type
0~63
0~63
dB
31
31
Interval Type
0~63
0~63
dB
63
63
Interval Type
0~63
0~63
dB
21
21
Interval Type
0~63
0~63
dB
25
25
NO, YES
None
YES
YES
Interval Type
1~64
1~64
None
32
32
Enumeratio NO(Not Allowed), n Type YES(Allowed) NO, YES
None
NO
NO
Interval Type
0~255
0~255
10
10
GSM_PHASE_1, GSM_PHASE_2, Enumeratio GSM_PHASE_2 n Type Plus
It is recommended that the value of this parameter is the same as that for "A Interface GSM_PHASE_2 Tag".
NO, YES
None
None
None
Interval Type
1~6
1~6
None
Interval Type
10~3500
10~3500
mA
40
40
Interval Type
10~3500
10~3500
mA
40
40
Interval Type
10~3500
10~3500
mA
40
40
Interval Type
10~3500
10~3500
mA
60
60
Interval Type
10~3500
10~3500
mA
60
60
Interval Type
10~3500
10~3500
mA
60
60
Interval Type
0~2047
0~2047
None
None
None
Interval Type
0~2047
0~2047
None
None
None
BYNAME(By Enumeratio Name), BYID(By n Type Index) BYNAME, BYID BYNAME(By Enumeratio Name), BYID(By n Type Index) BYNAME, BYID
None
None
None
None
None
None
String Type None
1~64 characters
None
None
None
String Type None
1~64 characters
None
None
None
Interval Type
0~15
0~15
None
None
None
CS1(CS1), CS2(CS2), Enumeratio CS3(CS3), n Type CS4(CS4)
CS1, CS2, CS3, CS4
None
CS1
CS1
None
MCS2
MCS2
Interval Type
10~70
10~70
None
20
20
MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), MCS4(MCS4), MCS5(MCS5), MCS6(MCS6), UAS7(UAS7), UAS8(UAS8), UAS9(UAS9), Enumeratio UAS10(UAS10), n Type UAS11(UAS11)
MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, UAS7, UAS8, UAS9, UAS10, UAS11
None
MCS6
MCS6
MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), MCS4(MCS4), MCS5(MCS5), MCS6(MCS6), UAS7(UAS7), UAS8(UAS8), UAS9(UAS9), UAS10(UAS10), UAS11(UAS11), Enumeratio UNFIXED(UNFIX n Type ED)
MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, UAS7, UAS8, UAS9, UAS10, UAS11, UNFIXED
None
UNFIXED
UNFIXED
Interval Type
0~5000
0~5000
ms
2000
2000
CS1(CS1), CS2(CS2), CS3(CS3), CS4(CS4), Enumeratio UNFIXED(UNFIX CS1, CS2, CS3, n Type ED) CS4, UNFIXED
None
UNFIXED
UNFIXED
MCS1(MCS1), MCS2(MCS2), MCS3(MCS3), MCS4(MCS4), MCS5(MCS5), MCS6(MCS6), MCS7(MCS7), MCS8(MCS8), MCS9(MCS9), Enumeratio UNFIXED(UNFIX n Type ED)
MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, MCS7, MCS8, MCS9, UNFIXED
None
UNFIXED
UNFIXED
Interval Type
0~70
0~70
None
40
40
Interval Type
0~63
0~63
dB
30
30
Interval Type
10~255
10~255
30
30
Interval Type
0~96
0~96
None
None
None
NO, YES
None
YES
YES
Interval Type
0~2047
0~2047
None
None
None
Interval Type
512~1535
512~1535
None
None
None
Interval Type
1~16
1~16
Interval Type
1~10
0.1~1, step:0.1
None
Interval Type
1~16
1~16
NO, YES
None
NO
NO
Interval Type
0~300
0~300
ms
120
120
Interval Type
0~64
0~64
per cent
10
10
Interval Type
0~64
0~64
per cent
Interval Type
0~64
0~64
per cent
Interval Type
0~64
0~64
per cent
Interval Type
0~64
0~64
per cent
Interval Type
0~64
0~64
per cent
None
PERMIT
PERMIT
BYTMSI(By TMSI), BYIMSI(By IMSI), BYMSISDN(By Enumeratio MSISDN), BYTMSI, BYIMSI, n Type BYIMEI(By IMEI) BYMSISDN, BYIMEI None NOTSUPPORT( Not Support), Enumeratio SUPPORT(Supp NOTSUPPORT, n Type ort) SUPPORT
None
None
None
String Type None
1~32 characters
None
None
None
String Type None
1~32 characters
None
None
None
Compound Type
HOUR 0~23 HOUR, MINUTE MINUTE 0~59
None
None
None
Compound Type
HOUR 0~23 HOUR, MINUTE MINUTE 0~59
None
None
None
Interval Type
-99~99
-99~99
degree Celsius
50
50
Interval Type
0~8
0~8
None
Interval Type
0~255
0~255
10
10
Interval Type
0~63
0~63
dB
35
35
NO, YES
None
NO
NO
Interval Type
1~255
1~255
Interval Type
1~63
1~63
dB
Enumeratio FDD(FDD), n Type TDD(TDD)
FDD, TDD
None
None
None
String Type None
2 characters
None
None
None
Interval Type
0~190,255
0~190, 255
None
255
255
No_Priority~0||( )$$(No Priority)** Public_Network_ First~1||( )$$(Public Network First)** VGCS_First(No Priority)** Public_Network_ First~1||( )$$(Public Network First)** VGCS_First~2||( No_Priority, Enumeratio )$$(VGC Public_Network_Firs n Type S First) t, VGCS_First None
No_Priority
No_Priority
Interval Type
0~190
0~190
None
Interval Type
50~95
50~95
per cent
95
95
NO, YES
None
NO
NO
NONE(None), LEVEL4(User Level 4), LEVEL3(User Level 3), LEVEL2(User Level 2), LEVEL1(User Level 1), LEVEL0(User Level 0), LEVELB(User Level B), Enumeratio LEVELA(User n Type Level A)
NONE, LEVEL4, LEVEL3, LEVEL2, LEVEL1, LEVEL0, LEVELB, LEVELA
None
LEVEL0
LEVEL0
Interval Type
50~95
50~95
per cent
90
90
DISABLE
DISABLE
Enumeratio DISABLE, n Type ENABLE
DISABLE, ENABLE None
None
None
DISABLE
DISABLE
DISABLE
DISABLE
Interval Type
2~4094
2~4094
None
None
None
Interval Type
2~4094
2~4094
None
None
None
Interval Type
2~4094
2~4094
None
Interval Type
2~4094
2~4094
None
None
None
Interval Type
2~4094
2~4094
None
None
None
Interval Type
2~4094
2~4094
None
None
None
Interval Type
0~7
0~7
None
None
None
Interval Type
0~7
0~7
None
Enumeratio NO(N0), n Type YES(Yes) FULL_RATE_VE R1, FULL_RATE_VE R2, FULL_RATE_VE R3, HALF_RATE_VE R1, HALF_RATE_VE R2, HALF_RATE_VE R3, FULL_RATE_VE R5
NO, YES
None
NO FULL_RATE_VE R11&FULL_RATE_ VER21&FULL_RATE_ VER30&HALF_RATE_ VER11&HALF_RATE_ VER20&HALF_RATE_ VER30&FULL_RATE_ VER5-0
NO
Bit Field Type
Full_rate_Ver1, Full_rate_Ver2, Full_rate_Ver3, Half_rate_Ver1, Half_rate_Ver2, Half_rate_Ver3, Full_rate_Ver5
None
FULL_RATE_VER11&FULL_RATE_VER21&FULL_RATE_VER30&HALF_RATE_VER 11&HALF_RATE_VER 20&HALF_RATE_VER 30&FULL_RATE_VER50
CLOSE, OPEN
None
OPEN
None
String Type None
1~9 characters
28 None
String Type None
1~9 characters
20 None
CLOSE, OPEN
None
OPEN
None
String Type None
1~9 characters
57 None
String Type None
1~9 characters
42 None
NO, YES
None
YES
YES
Interval Type
0~12
0~12
None
Interval Type
1~30
1~30
None
14, 15, 16, 18, 20, 22, 24, 26, 28, 30, 33, 36, 88
None
20
20
18, 20, 22, 24, 26, 28, 30, 32, 35, 38, 41, 45, 88
None
30
30
Interval Type
0~12
0~12
None
Interval Type
0~999
0~999
None
None
None
Interval Type
4000~33000
4000~33000
ms
27000
27000
Interval Type
3000~34000
3000~34000
ms
34000
34000
Interval Type
3000~34000
3000~34000
ms
26000
26000
Interval Type
0~1000
0~1000
280
280
Interval Type
1~30
1~30
15
15
Interval Type
0~60
0~60
Interval Type
0~1000
0~1000
300
300
INACTIVE
INACTIVE
CLOSE, OPEN
None
OPEN
None
NOLIMIT(No Enumeratio Limit), n Type LIMIT(Limit)
NOLIMIT, LIMIT
None
NOLIMIT
NOLIMIT
East_Longitude(E ast Longitude), Enumeratio West_Longitude( East_Longitude, n Type West Longitude) West_Longitude
None
None
None
INACTIVE
INACTIVE
NO, YES
None
None
None
Enumeratio DENY(Deny), n Type ALLOW(Allow)
DENY, ALLOW
None
DENY
None
SUN(Sunday), MON(Monday), TUE(Tuesday), WED(Wednesda y), THU(Thursday), SUN, MON, TUE, Enumeratio FRI(Friday), WED, THU, FRI, n Type SAT(Saturday) SAT
None
None
None
M3UA_ASP(M3U A_ASP), Enumeratio M3UA_IPSP(M3 M3UA_ASP, n Type UA_IPSP) M3UA_IPSP
None
M3UA_ASP
M3UA_ASP
Interval Type
0~24
0~24
22
22
NO, YES
None
NO
NO
Interval Type
1~255
5~1275, step:5
min
12
12
Interval Type
0~24
0~24
Enumeratio NO(No), n Type YES(Yes) Active(Format active area), Enumeratio Standby(Format n Type standby area)
NO, YES
None
NO
NO
Active, Standby
None
Active
Active
GSM_AND_UMT S(GSM AND UMTS), Enumeratio UMTS(UMTS), GSM_AND_UMTS, n Type GSM(GSM) UMTS, GSM None Enumeratio n Type GO(GSM Only)
GSM
GSM
GO
None
None
None
E1_UNBA(E1 Unbalance), E1_BA(E1 Enumeratio Balance), T1(T1), E1_UNBA, E1_BA, n Type E1(E1) T1, E1
None
None
None
Enumeratio n Type E1(E1), T1(T1)
E1, T1
None
E1
E1
Interval Type
1~127
1~127
None
None
16
Interval Type
30~300
30~300
90
90
Interval Type
60~300
60~300
90
90
Interval Type
30~60000
30~60000
None
600
GMT-1200(GMT12:00), GMT1100(GMT11:00), GMT1000(GMT10:00), GMT0930(GMT09:30), GMT0900(GMT09:00), GMT0800(GMT08:00), GMT0700(GMT07:00), GMT0600(GMT06:00), GMT0500(GMT05:00), GMT0430(GMT04:30), GMT0400(GMT04:00), GMT0330(GMT03:30), GMT0300(GMT03:00), GMT0200(GMT02:00), GMT0100(GMT01:00), GMT(GMT), GMT+0100(GMT Enumeratio +01:00), n Type GMT+0200(GMT
GMT-1200(GMT12:00), GMT1100(GMT-11:00), GMT-1000(GMT10:00), GMT0930(GMT-09:30), GMT-0900(GMT09:00), GMT0800(GMT-08:00), GMT-0700(GMT07:00), GMT0600(GMT-06:00), GMT-0500(GMT05:00), GMT0430(GMT-04:30), GMT-0400(GMT04:00), GMT0330(GMT-03:30), GMT-0300(GMT03:00), GMT0200(GMT-02:00), GMT-0100(GMT01:00), GMT(GMT), GMT+0100(GMT+0 1:00), GMT+0200(GMT+0 2:00), GMT+0300(GMT+0 3:00), GMT+0330(GMT+0 3:30), GMT+0400(GMT+0 4:00), GMT+0430(GMT+0 None
GMT+0800
None
Impact
Parameter Relationship
Access
Service Interrupted After Modification
Cell
None
Read & Write
N (No impact on the UE in idle mode)
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
BSC
The value of this parameter should be smaller than "AbisFCTimer2".
Read & Write
BSC
The value of this parameter should be greater than "AbisFCTimer1".
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
BSC
The value of this parameter is the same as those of "Um Interface Tag" and "A Interface Tag".
Read & Write
BSC6900
None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell.
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
PPP link
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
BTS
The value of this parameter must be smaller than "AC Voltage Read & Upper Threshold". Write
BTS
The value of this parameter must be greater than "AC undervoltage alarm threshold".
Read & Write
BTS
The value of this parameter must be smaller than "AC overvoltage alarm threshold".
Read & Write
BTS
The value of this parameter must be greater than "AC Voltage Read & Lower Threshold". Write
Cell
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
N (No impact on the UE in idle mode) If the value of this parameter is modified to "Lock", forced handover is triggered to hand the ongoing services on the corresponding TRX to another TRX. Services will be disrupted if the handover fails. If the value of this parameter is modified to "Shutdown", the ongoing services are not affected but new service accesses are not allowed.
TRX
None
Read & Write
Current BFD session
None
Read & Write
If the value of this parameter is modified to "Lock", forced handover is triggered to hand the ongoing services on the corresponding channel to another channel. Services will be disrupted if the handover fails. If the value of this parameter is modified to "Shutdown", the ongoing services are not affected but new service accesses are not allowed.
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
This parameter can be configured only when "BTS Software Version 1" is configured.
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
If the number of echo cancellations performed by AEC exceeds "AEC Detect Threshold" within the time specified by "AEC Detect Time", the Read & TFO is closed forcibly. Write If the number of echo cancellations performed by AEC exceeds "AEC Detect Threshold" within the time specified by "AEC Detect Time", the Read & TFO is closed forcibly. Write
Board
Cell
None
Read & Write
Cell
None
Read & Write
None
None
Read & Write Read & Write
Not involved
Board
None
Cell
None
Read & Write
Cell
None
Read & Write Read & Write Read & Write
None
None
None
None
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
BTS
None
BTS
None
Cell
None
BSC6900
None
BTS
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
Board
None
Board
None
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
When "BWMODE" in "ADD RSCGRP" is set to HALF_DUPLEX, this parameter is valid;if the "BWMODE" in "ADD RSCGRP" of upper class and lower class RSCGRP is set to HALF_DUPLEX, the "AllBw" in "ADD RSCGRP" of upper class RSCGRP can not less than the "AllBwE" in "ADD RSCGRP" of lower class RSCGRP;The "AllBw" in "ADD RSCGRP" of upper class RSCGRP can not less Transmissi than the sum of "TxBw" on and "RxBw" in "ADD resource RSCGRP" of lower class Read & group RSCGRP. Write
BSC
None
Read & Write
Cell
None
Read & Write
Cell
The following condition must be met: "ALLOWAMRHALFRAT EUSERPERC" <= "ALLOWHALFRATEUS Read & ERPERC". Write
BSC
None
Read & Write
Cell
None
Read & Write
Cell
The following condition must be met: "ALLOWHALFRATEUS ERPERC" >= "ALLOWAMRHALFRAT Read & EUSERPERC". Write
E1/T1 link None
Read & Write
PBE1T1
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
BTS
None
BTS
None
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
The recommended value of this parameter is greater than twice "Alarm Clear Accumulative Time Threshold" and greater than twice "Flash Alarm Read & Occur Threshold". Write
BTS
None
Read & Write
BTS
The recommended value of this parameter is greater than twice "Alarm Read & Clear Times Threshold". Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
Not involved
Cell
None
Read & Write
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write
Cell
None
Read & Write
Cell
Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to PWR2 and "DNPCEN" in the "SET GCELLBASICPARA" Read & command is set to YES. Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "AMRDLQLTHRED" >= Read & "AMRDLQHTHRED". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "AMRDLQLTHRED" >= Read & "AMRDLQHTHRED". Write
Cell
Cell
Cell
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "AMRDLSSHTHRED" >= Read & "AMRDLSSLTHRED". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "AMRDLSSHTHRED" >= Read & "AMRDLSSLTHRED". Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is Read & set to HOALGORITHM2. Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "AMRFULLTOHALFHOA Read & LLOW" is set to YES. Write
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
Cell
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "AMRULQLOWTHRED" Read & >= "AMRULQHTHRED". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "AMRULQLOWTHRED" Read & >= "AMRULQHTHRED". Write
Cell
Cell
Cell
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "AMRULSSHTHRED" >= Read & "AMRULSSLTHRED". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "AMRULSSHTHRED" >= Read & "AMRULSSLTHRED". Write
BSC
None
Read & Write
MSC
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
None
None
Read & Write
None
None
Read & Write
Not involved
IP path
None
BSC6900
None
Board
None
Read & Write
Board
None
Board
None
Board
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Board
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
TRX
None
Read & Write
Not involved
TRX
None
Read & Write
BTS
The setting of this parameter depends on "Board Type".
Read & Write
MTP3 link None
Read & Write
Not involved
SCTP link None
Read & Write
Not involved
BSC
None
Read & Write
Not involved
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
BSC
None
BSC
None
Read & Write
BSC
None
Read & Write
None
None
Read & Write
None
None
Read & Write
TRX
This parameter is valid only when "WLNKALMFLAG" is set Read & to YES. Write
TRX
TRX
Ethernet port
None
Read & Write
Ethernet port
None
Read & Write
MTP3 link None
Read & Write
Not involved
ATERCON SL None
Read & Write
MTP3 link None
Read & Write
Not involved
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
In an enhanced concentric cell, if "LOWRXLEVOLFORBID SWITCH" is set to ON, this parameter and "OTOURECEIVETH" determine whether the current uplink receive level meets the condition for assigning channels of the overlaid subcell during the assignment of the underlaid subcell channels and overlaid subcell channels. In a normal concentric cell, if "LOWRXLEVOLFORBID SWITCH" is set to ON, this parameter, together with "RECLEVTHRES" and "RECLEVHYST", determines whether the current uplink receive level meets the condition for assigning channels of the overlaid subcell during the assignment of the underlaid subcell channels and overlaid Read & subcell channels. Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
MSC
None
Read & Write
BSC
This parameter is used with "T18 -s" in flow control over the A interface. The value of this parameter should be Read & smaller than "T18 -s". Write
MSC
This parameter is used with "T17 -s" in flow control over the A interface. The value of this parameter should be Read & greater than "T17 -s". Write
BSC
None
Read & Write
BSC
None
Read & Write
MSC
None
Read & Write
Cell
This parameter is valid only when "IUOTP" is set Read & to Concentric_cell. Write
Cell
This parameter is valid only when "ATCBHoSwitch" is set to OPEN, "IUOTP" is set to EDB_cell, or "TIGHTBCCHSWITCH" Read & is set to ON. Write
Cell
This parameter is valid only when "ATCBHoSwitch" is set to OPEN, "IUOTP" is set to EDB_cell, or "TIGHTBCCHSWITCH" Read & is set to ON. Write
BSC
None
Read & Write
BSC
If the resource usage on the Ater interface exceeds the value of "AterCongstRatio" and this parameter is set to Open, the BSC preferentially selects TCHF when assigning Read & traffic channels. Write
BSC
This parameter is valid only when "AterCongHRFlag" is set Read & to OPEN. Write
MTP3 link None
Read & Write
Not involved
BSC
None
Read & Write
E1/T1 link None
Read & Write
Not involved
BSC
None
Read & Write
Not involved
E1/T1 link None
Read & Write
E1/T1 link None
Read & Write
ATERCON SL None
Read & Write
Not involved
BSC
None
Read & Write
None
None
Read & Write
MTP3 link None
Read & Write
Not involved
Cell
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
None
None
E1/T1 port None
BSC6900
None
Read & Write
PPP link
None
Read & Write
MP group
None
Read & Write
BTS
None
Read & Write
PPP link
None
Read & Write
MP group
None
Read & Write
BTS
This parameter is required only when "Validate protocol type" is set to "PAP_V" or "CHAP_V" with the "ADD Read & PPPLNK" command. Write
PPP link
None
Read & Write
MP group
None
Read & Write
BTS
This parameter is required only when "Validate protocol type" is set to "PAP_V" or "CHAP_V" in the "ADD PPPLNK" command.
Read & Write
PPP link
None
Read & Write
MP group
None
Read & Write
BTS
None
Read & Write
Ethernet port
None
Read & Write
None
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
BTS
None
BSC6900
None
BSC6900
None
Read & Write
Channelize d optical port None
Read & Write
BSC
Generally, the value of this parameter is equal to "Um Interface Tag" Read & and "Um Interface Tag". Write Read & Write
None
None
BTS
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Not involved
Cell
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
Ethernet port
None
Read & Write
BTS
This parameter can work with "BTSPOWEROFFLOCK BCCH" in "SET BTSLOCKBCCH" to determine whether to shut down the TRX that Read & carries the main BCCH. Write
BTS
This parameter is valid only when "BAKPWRSAVMETHOD Read & " is set to BYPWR. Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
None
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
SCTP link None
Read & Write
TRX
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Cell
None
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BC
None
Read & Write
BTS
None
Read & Write
BTS
The value of this parameter must be greater than "Float charging voltage" and at least two volts lower than "DC Voltage Upper Read & Threshold". Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
SCCP
None
Read & Write
Not involved
BSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
This parameter is valid only when the ""INTERRATOUTBSCH OEN"" parameter regarding the "SET GCELLHOBASIC" Read & command is set to YES. Write
Cell
Cell
This parameter is valid only when "BETTERCELLHOEN" is set to YES and "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "BETTERCELLSTATTIM E" >= "BETTERCELLLASTTIM Read & E". Write
Cell
This parameter is valid only when "BETTERCELLHOEN" is set to YES and "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "BETTERCELLSTATTIM E" >= "BETTERCELLLASTTIM Read & E". Write
Current BFD session
None
Read & Write
Not involved
Current BFD session
None
Read & Write
TRX
Cell
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
If you set "Switch of stat blinking alarm" to "ENABLE", you need to set "Alarm switch of blinking filter" to Read & "ENABLE". Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
If you set "Switch of stat blinking alarm" to "ENABLE", you need to set "Alarm switch of blinking filter" to Read & "ENABLE". Write
BSC
None
Read & Write
BSC
None
Read & Write
Transport channel
None
Read & Write
Not involved
Transport channel
None
Read & Write
Not involved
Transport channel
None
Read & Write
Not involved
BSC
This parameter is valid when "BMTCFFLAG" in the "SET BSCFCPARA" Read & command is set to ON. Write
MP group
None
Read & Write
Not involved
BSC6900
None
Read & Write
BTS
None
Read & Write
BTS
The value of this parameter must be greater than or equal to "Position of Break Point 1".
Read & Write
Cell
None
Read & Write
Cell
This parameter is valid only when "BQHOEN" is set to YES and "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "BQSTATTIME" >= Read & "BQLASTTIME". Write
Cell
None
Read & Write
Cell
This parameter is valid only when "BQHOEN" is set to YES and "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "BQSTATTIME" >= Read & "BQLASTTIME". Write
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
None
None
None
None
None
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
BTS
None
Board
None
None
None
Read & Write
Ethernet port
None
Read & Write Read & Write Read & Write Read & Write Read & Write
Not involved
BSC6900
None
BSC6900
None
BSC6900
None
BTS
None
None
None
Read & Write
BTS
The setting of this parameter must meet the following condition: "FallBack Start Time" > "Ring II Wait Time Before Switch" + "Ring II Try Rotating Duration Read & Time". Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
E1/T1 link None
Read & Write
BSC
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Adjacent node
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
BSC
None
Read & Write
BTS
The IP address must have been configured.
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
This parameter is valid only when "BSCPMA" is Read & set to YES. Write
BTS
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
When "BSCPMA" is set to YES and "BSCQAD" is also set to Yes, highpriority calls try to preempt radio resources of low-priority calls firstly if radio resources are insufficient. If no radio resources of low-priority calls can be preempted, then the high-priority calls are put into the queue. When "BSCPMA" is set to NO and "BSCQAD" is set to Yes, high-priority calls are directly put into the queue if the radio resources are Read & insufficient. Write
BSC
This parameter is valid only when "BSCQAD" is Read & set to YES. Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
When configure TC data, for example, select TC for "BM/TC config Flag", or MTP2 for "Application Type", the parameter Read & E1/T1 link should be set. Write Read & Write
BSC
None
BTS
None
Read & Write
Cell
None
Read & Write
Cell
This parameter must be set when "BTSMESRPTPREPRO C" is set to Read & BTS_PreprocessingN. Write Read & Write
Cell
None
Cell
None
Cell
None
Cell
None
BSC
None
Read & Write
MSC
None
Read & Write
Cell
None
None
None
None
None
Read & Write
None
None
Read & Write
E1/T1 port None
Cell
None
E1/T1 port None
Read & Write
Not involved
Board
None
Read & Write
Not involved
Channelize d optical port None IP logical port
Not involved
None
E1/T1 port None
Read & Write
Not involved
BTS
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
The value range of this parameter varies with BTS type. Different types of BTSs support different Read & type of boards. Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Not involved
E1/T1 link None
Read & Write
ATERCON SL None
Read & Write
Not involved
Cell
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Adjacent node
None
Read & Write
BTS
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BTS
None
Read & Write
Not involved
None
None
Read & Write
BSC6900
None
Read & Write
None
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
BSC
The value of BtsLsStartMode should be set when "BssLsGenMode" is set to BTSPRIORITY, BSCPRIORITY, or BTSONLY.
BTS
None
Cell
If the value of this parameter is BSC_Preprocessing, the pre-processing is performed on the BSC. In this case, the following parameters are invalid: "PRIMMESPPT", "BSMSPWRLEV", and Read & "MRPREPROCFREQ". Write
BTS
None
Read & Write
BTS
None
Read & Write
Not involved
None
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
Cell
None
Read & Write
None
None
Read & Write
BTS
This parameter is used to caculate BindWidth of BTSAbisHDLCPath: 1. When Transmission compression ratio is within range of [1, 200], BindWidth=16K*(amount of TRXs) + 64K*(amount of TRXs)*(Transmission compression ratio)/100; 2. When Transmission compression ratio is within range of [200, 250], BindWidth=16K*(amount of TRXs) + 64K*(amount of TRXs)*(200 + (Transmission compression ratio Read & 200)*12)/100. Write
BTS
None
Read & Write
Not involved
BTS
None
Read & Write
Not involved
None
None
Read & Write
Current BFD session
None
Read & Write
None
None
Read & Write
BTS
None
Read & Write
BTS
The setting of this parameter must meet the following condition: "FallBack Start Time" > "Ring II Wait Time Before Switch" + "Ring II Try Rotating Duration Read & Time". Write
SCTP link None
Read & Write
Cell
None
Read & Write
Not involved
Cell
None
Read & Write
BSC
None
Read & Write
IP logical port
The dynamic bandwidth switch is turned only when the IPPM function is activated through "ACT IPPM".
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
IP logical port
None
Read & Write
Transmissi on When "GRPT" in "ADD resource RSCGRP" is set to IP, group this parameter is valid.
Read & Write
IP logical port
None
Read & Write
TRX
BSC6900
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
None
None
Read & Write
Not involved
Cell
None
None
None
Cell
None
Read & Write
BTS
None
Read & Write
BTS
This parameter has relations with DCOMDCBM board
Read & Write
IP path
None
Read & Write
IP logical port
None
Read & Write
Not involved
None
None
Read & Write
Not involved
Cell
None
Read & Write
BSC
None
Read & Write
Not involved
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
Cell IP logical port
None
None
BSC
None
Read & Write
Cell
This parameter is valid only when "MEASURETYPE" in "SET GCELLCCUTRANSYS" is set to EnhMeasReport.
Read & Write
Cell
Read & Write
BSC
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
This parameter is valid only when "EDGE" in "SET GCELLGPRS" is set to YES.
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
The value of this parameter must be greater than "Float charging voltage" and at least one volt lower than "DC overvoltage alarm Read & threshold". Write
BTS
The value of this parameter must be greater than "Float charging voltage" and at least three volts lower than "DC overvoltage Read & alarm threshold". Write
BTS
The value of this parameter must be smaller than "Even Charging Voltage".
Read & Write
BTS
The value of this parameter must be smaller than "Even Charging Voltage".
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Cell
None
BSC
None
Read & Write
Cell
None
Cell
None
None
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
MSC
None
Read & Write
Cell
This parameter is valid only when "SDDYN" in "SET GCELLBASICPARA" is set to YES.
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
The parameter value corresponds to the power of each passage on the MRRU. If the cell is configured only on one passage of the MRRU, then the power assigned to another passage of the operator must be set Read & to 0. Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
BTS
The value of this parameter must be smaller than "DC undervoltage alarm threshold".
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
The value of this parameter must be smaller than "Low Temp Read & Alarm Assembled Bat2". Write
BTS
None
Read & Write
BTS
The value of this parameter must be greater than "Lower Assembled Bat1 TEMP Measure".
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
TRX
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
IP path
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
ATERCON SL None
Read & Write
ATERCON SL None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
ATERCON SL None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
MSC
None
Read & Write
Cell
None
Read & Write
IP path
When the value of "PATHCHK" in "ADD IPPATH" is set to ENABLED, this parameter is valid.
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
None
None
Not involved
None
None
BTS
None
Read & Write
BTS
None
Read & Write
SCTP link None
Read & Write
SCTP link None
Read & Write
SCTP link None
Read & Write
None
None
Not involved
None
None
BTS
None
Board
None
Physical channel
None
Read & Write
Not involved
None
None
Read & Write
BTS
None
Read & Write
MSC
None
Read & Write
MSC
None
Read & Write
MSC
None
Read & Write
MSC
None
Read & Write
MSC
None
Read & Write
MSC
None
Read & Write
MSC
None
Read & Write
Cell
This parameter is valid only when "QTRUPWRSHARE" is not set to NONE.
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
Physical channel
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
When the value of "OPMODE" of "BLK ACIC" is BYCICVALUE, the value of CIC needs Read & E1/T1 link to be set. Write
None
None
Read & Write
Not involved
BSC
None
Read & Write
Not involved
BSC
None
Read & Write
Not involved
BSC
None
Read & Write
Not involved
BSC
None
Read & Write
Not involved
BSC
None
Read & Write
Not involved
MSC
None
Read & Write
MSC
None
Read & Write
MSC
None
Read & Write
MSC
None
Read & Write
MSC
None
Read & Write
MSC IP logical port
None
None
Cell
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Cell
This parameter is valid only when "GPRS" is set to SupportAsInnPcu and "SUPPORTDTM" is set Read & to SUPPORT. Write
BSC
None
Read & Write
Board
None
Read & Write
None
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
BTS
This parameter is valid only when "AntiTheftAllow" is set to Read & YES. Write
BSC6900
None
Read & Write
BTS
This parameter is valid only when "AntiTheftAllow" is set to Read & YES. Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
None
None
Read & Write
Not involved
BTS
The value range of this parameter varies with BTS type. Different types of BTSs support a different number of Read & cabinets. Write The value range of this parameter varies with BTS type. Different types of BTSs support a different number of Read & cabinets. Write
BTS
BSC6900
None
Read & Write
None
None
None
None
Cell
None
Read & Write
MSC
None
Read & Write
NSE
None
Read & Write
BSC
None
Not involved
None
None
BSC
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
None
None
Read & Write
None
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
Cell
This parameter is valid only when "PWRBCDALLOWD" is set to YES.
Read & Write
Cell
None
Read & Write
BSC6900
None
None
None
Cell
None
Read & Write
BTS
None
Read & Write
Not involved
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
None
None
Read & Write
BSC6900
None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
Cell
This parameter, together with "BANTIME", limits the handover frequency Read & in the cell. Write
Ethernet port
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
None
None
Read & Write
TRX
This parameter is valid only when "BSCDynSwitchTrxPAAll ow" in "SET BSCDSTPA" and "DYNOpenTrxPower" in "SET GCELLBASICPARA" are Read & set to YES. Write Read & Write
BSC
None
BTS
None
Read & Write
Cell
None
Read & Write
N (Impact on the UE in idle mode)
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
SCTP link None
Read & Write
BSC
This parameter is valid only when "CHR Output Mode" is set to "Common User Mode".
Read & Write
BSC
Read & Write
BSC
This parameter is valid only when "CHR Output Mode" is set to "Specified User Mode".
Read & Write
BSC
Read & Write
BSC6900
None
Read & Write
BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to A or ABIS, this parameter is valid.
Read & Write
BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to ABIS, this parameter is valid.
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
BSC
Read & Write
BSC
Read & Write
BSC
Read & Write
BSC
None
Read & Write
BSC
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
TRX
None
Read & Write
BSC
None
Read & Write
BSC6900
None
Read & Write
BSC
This parameter is valid only when "CHR Output Mode" is set to "Specified User Mode".
Read & Write
BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to A or ABIS, this parameter is valid.
Read & Write
BSC6900
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
BSC6900
none
Read & Write
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
Board
None
Read & Write
Board
None
BSC6900
None
Cell
None
Read & Write
None
None
Read & Write
BTS
The value range of this parameter varies with BTS type. Different types of BTSs support a different number of Read & cabinets. Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Transmissi on resource group None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
Not involved
MSC
None
Read & Write
BTS
None
None
None
Not involved
None
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
None
BSC6900
None
BSC
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
The value range of this parameter varies with BTS type. Different types of BTSs support a different number of Read & cabinets. Write The value range of this parameter varies with BTS type.
BTS
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
The value of this parameter must be greater than "Battery power-off voltage", lower than "DC overvoltage alarm threshold", and at least two volts lower than Read & "Float charging voltage". Write
BTS
The value of this parameter must be greater than "DC undervoltage alarm threshold" and at least two volts greater than Read & "Even charging voltage". Write
BTS
The value of this parameter must be greater than "Battery power-off voltage", lower than "DC overvoltage alarm threshold", and at least three volts lower than "Float charging Read & voltage". Write
BTS
The value of this parameter must be greater than "DC Voltage Lower Threshold" and at least one volt greater than "Even charging Read & voltage". Write
Cell
None
Read & Write
Cell
None
Read & Write
SCCP
None
Read & Write
Not involved
BSC6900
None
Read & Write
BTS
None
Read & Write
Ethernet port
None
Read & Write
BSC6900
None
Read & Write
Not involved
None
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
BSC
This parameter is required when the Connection Type is Internal RNC.
Read & Write
BSC
Read & Write
BSC
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Current BFD session
None
Read & Write
BSC6900
None
Not involved
BTS
None
BTS
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
Cell
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
MSC
None
Read & Write
BSC6900
None
Read & Write
None
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Not involved
BTS
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
None
None
Read & Write
MSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
Cell
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLAFSREXQUALHIGH THRED" >= "DLAFSREXQUALLOW Read & THRED". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLAFSREXQUALHIGH THRED" >= "DLAFSREXQUALLOW Read & THRED". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLAHSREXQUALHIGH THRED" >= "DLAFSREXQUALLOW Read & THRED". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLAHSREXQUALHIGH THRED" >= "DLAFSREXQUALLOW Read & THRED". Write
NSVC
None
Read & Write
BSC
None
Read & Write
Cell
This parameter is valid only when "GPRS" is set Read & to SupportAsInnPcu. Write
Cell
This parameter is valid when "FRINGEHOEN" is set to YES or "LOADHOEN" is set to Read & YES. Write
Cell
This parameter is valid only when "PWRCTRLOPTIMIZED Read & EN" is set to YES. Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLFSREXQUALHIGHT HRED" >= "DLFSREXQUALLOWT Read & HRED". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLFSREXQUALHIGHT HRED" >= "DLFSREXQUALLOWT Read & HRED". Write
Cell
None
Read & Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLHSREXQUALHIGHT HRED" >= "DLHSREXQUALLOWT Read & HRED". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLHSREXQUALHIGHT HRED" >= "DLHSREXQUALLOWT Read & HRED". Write
Cell
The setting of this parameter must meet the following condition: "DLTHF1" + "DLHYSTF1" < "DLTHF2" + Read & "DLHYSTF2". Write
Cell
Cell
Cell
The setting of this parameter must meet the following condition: "DLTHH1" + "DLHYSTH1" < "DLTHH2" + Read & "DLHYSTH2". Write
Cell
Cell
Cell
The setting of this parameter must meet the following condition: "DLTHWB1" + "DLHYSTWB1" < "DLTHWB2" + Read & "DLHYSTWB2". Write
Cell
The setting of this parameter must meet the following condition: "DLTHWB1" + "DLHYSTWB1" < "DLTHWB2" + Read & "DLHYSTWB2". Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
Cell
Cell
The setting of this parameter must meet the following conditions: "DLLTFERLOWTH" < "DLLTFERTGT"; "DLLTFERLOWTH" < Read & "DLLTFERUPTH". Write
Cell
The setting of this parameter must meet the following condition: "LTFERLOWTH" < "DLLTFERTGT" < Read & "LTFERUPTH". Write
Cell
The setting of this parameter must meet the following conditions: "DLLTFERUPTH" > "DLLTFERTGT"; "DLLTFERUPTH" > Read & "DLLTFERLOWTH". Write
Cell
None
Read & Write
Cell
Cell
BSC
None
Read & Write
Cell
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "DLQLOWTHRED" >= Read & "DLQHIGHTHRED". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "DLQLOWTHRED" >= Read & "DLQHIGHTHRED". Write
Cell
Cell
Cell
Cell
This parameter is valid only when "BQHOEN" in "SET GCELLHOBASIC" Read & is set to YES. Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
Cell
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLREXLEVHIGHTHRE D" >= "DLREXLEVLOWTHRE Read & D". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "DLREXLEVHIGHTHRE D" >= "DLREXLEVLOWTHRE Read & D". Write
Cell
Cell
Cell
Cell
Cell
Cell
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "DLSSHIGHTHRED" >= Read & "DLSSLOWTHRED". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "DLSSHIGHTHRED" >= Read & "DLSSLOWTHRED". Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
The setting of this parameter must meet the following conditions: "DLTHF1" < "DLTHF2"; "DLTHF1" + "DLHYSTF1" < "DLTHF2" + Read & "DLHYSTF2". Write
Cell
Cell
Cell
The setting of this parameter must meet the following conditions: "DLTHH1" < "DLTHH2"; "DLTHH1" + "DLHYSTH1" < "DLTHH2" + Read & "DLHYSTH2". Write
Cell
Cell
Cell
The setting of this parameter must meet the following conditions: "DLTHWB1" < "DLTHWB2"; ["DLTHWB1" + "DLHYSTWB1" < "DLTHWB2" + Read & "DLHYSTWB2". Write
Cell
The setting of this parameter must meet the following conditions: "DLTHWB1" < "DLTHWB2"; ["DLTHWB1" + "DLHYSTWB1" < "DLTHWB2" + Read & "DLHYSTWB2". Write
BTS
Read & Write
BTS
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
This parameter is valid only when "EGPRS2A" is set to YES.
Read & Write
Cell
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
None
None
Read & Write
Cell
Read & Write
SCCP
When the value of "SPDF" in "ADD N7DPC" is set to DNF, this parameter is valid.
Read & Write
SCCP
None
Read & Write
Not involved
E1/T1 link None
Read & Write
E1/T1 link None
Read & Write
BSC
None
Read & Write
SCCP
None
Read & Write
Not involved
SCCP
None
Read & Write
Not involved
BSC
DPX of Iur-g type
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BTS
BTS
BTS
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
PPP link
None
Read & Write
Not involved
MP link
None
Read & Write
SCTP link None
Read & Write
Ethernet port
None
Read & Write
Not involved
BSC6900
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
None
None
Read & Write
None
None
Read & Write
BSC6900
None
Read & Write
Board
BSC
Read & None Write This parameter is valid only when "IDXTYPE" is Read & set to BYCELL. Write
BSC
None
Read & Write
BSC6900
None
Read & Write
None
None
Read & Write
IP route Current BFD session
None
Read & Write
Not involved
None
Read & Write
Not involved
IP route
None
Read & Write
IP route
None
Read & Write
Not involved
IP route
None
E1/T1 port None
E1/T1 port None
Read & Write
Cell
The value of DTLOADTHRED must be set when "REASSEN" in the "SET GCELLBASICPARA" command is set to Read & DIRECTRYEN. Write
Cell
None
Read & Write
BTS
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
None
None
Read & Write
None
None
Read & Write
BTS
None
Read & Write
Not involved
None
None
Read & Write
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
IP path
Read & Write
Cell
A 3G neighboring cell can be added into the candidate cell queue when the following conditions are met: "INTERRATOUTBSCHO EN" is set to YES; "BET3GHOEN" is set to YES; the Ec/No of the 3G neighboring cell for a period of time is greater than the sun of "HOECNOTH3G" and Read & "ECNOOFF". Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
None
None
BSC6900
None
Read & Write
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell. The following condition must be met: "EDBSTATTIME" >= Read & "EDBLASTTIME". Write
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell. The following condition must be met: "EDBSTATTIME" >= Read & "EDBLASTTIME". Write
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell.
Read & Write
Cell
This parameter is valid only when "GPRS" is set to SupportAsInnPcu or Read & SupportAsExtPcu. Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "FRINGEHOEN" is set to YES. The following condition must be met: "EDGEADJSTATTIME" >= Read & "EDGEADJLASTTIME". Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "FRINGEHOEN" is set to YES. The following condition must be met: "EDGEADJSTATTIME" >= Read & "EDGEADJLASTTIME". Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "FRINGEHOEN" is set to YES. The following condition must be met: "EDGESTAT" >= Read & "EDGELAST". Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "FRINGEHOEN" is set to YES. The following condition must be met: "EDGESTAT1" >= Read & "EDGELAST1". Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "FRINGEHOEN" is set to YES. The following condition must be met: "EDGESTAT" >= Read & "EDGELAST". Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "FRINGEHOEN" is set to YES. The following condition must be met: "EDGESTAT1" >= Read & "EDGELAST1". Write
None
None
Read & Write
Cell
None
Read & Write
Cell
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
MTP3 link None
Read & Write
Board
None
Read & Write
BSC6900
None
Read & Write
Not involved
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
BSC6900
None
Read & Write
Not involved
BSC
None
Read & Write
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC
None
Read & Write
BSC6900
None
Read & Write
When the value of "OPMODE" of "BLK ACIC" is BYCICRANGE, the value of ENDCIC Read & E1/T1 link needs to be set. Write
PBCIC
None
Read & Write
BSC
The setting of this parameter must meet the following condition: When "EndMonthDSTPA" and "StartMonthDSTPA" are set to the same value, "EndDayDSTPA" must be later than Read & "StartDayDSTPA". Write
BTS
The value of this parameter must be greater than "Heater Startup Temperature".
Read & Write
BSC
The setting of this parameter must meet the following condition: "EndMonthDSTPA" is the same as or is later than Read & "StartMonthDSTPA". Write
BTS
None
Read & Write
BSC
When "BSCDynSwitchTrxPAAll ow" is set to YES, the value of "EndTimeTACloseTrxPA Read & " must be set. Write
When the value of "OPMODE" of "BLK ATERE1T1" is BYCICRANGE, the value of ENDTS needs E1/T1 link to be set.
Read & Write
When the value of "OPMODE" of "BLK AE1T1" is BYCICRANGE, the value of ENDTS needs E1/T1 link to be set.
BTS
None
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Cell
This parameter is valid only when "UTOOTRAFHOALLOW " is set to YES. The following condition must be met: "ENSOVERLDTHRSH" > "ENGOVERLDTHRSH" Read & > "ENLOWLDTHRSH". Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
Read & Write
Cell
Read & Write
Cell
BSC
None
Read & Write
BSC
None
Read & Write
Cell
Cell
None
Read & Write
SCCP
None
Read & Write
Not involved
SCCP
Negotiation with the peer network element is Read & required. Write
Not involved
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell and "HOCTRLSWITCH" in "SET GCELLHOBASIC" is set to Read & HOALGORITHM2. Write
Board
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC
None
Read & Write
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Cell
None
Read & Write
MSC
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
BSC6900
None
None
None
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
None
If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of "Upper Limit of Signal Output of External Analog 1" is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of "Upper Limit of Signal Output of Read & External Analog 1" is A. Write
None
If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of "Lower Limit of Signal Output of External Analog 1" is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of "Lower Limit of Signal Output of Read & External Analog 1" is A. Write
None
None
Read & Write
None
If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of "Upper Limit of Measurement Range of External Analog 1" is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of "Upper Limit of Measurement Range of Read & External Analog 1" is A. Write
None
If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of "Lower Limit of Measurement Range of External Analog 1" is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of "Lower Limit of Measurement Range of Read & External Analog 1" is A. Write
None
None
None
None
Read & Write
None
None
None
None
None
None
Read & Write
None
None
None
None
None
None
Read & Write
None
None
Cell
None
Read & Write
Cell
None
Read & Write
Cell
Read & Write
Cell
Read & Write
BSC
None
BSC
None
BSC
None
BSC
None
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
If "UPEXTTBFINACTDEL AY" in the "SET GCELLPRIVATEOPTPA RA" command is set to 0, "EXTUTBFNODATA" must be 0. If "UPEXTTBFINACTDEL AY" is not set to 0, "EXTUTBFNODATA" Read & can be 0 or 1. Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
None
BSC6900
None
BSC6900
None
Read & Write
BSC6900
None
Read & Write
None
None
Read & Write
BSC6900
None
Read & Write
None
None
Read & Write
Cell
None
Read & Write
BTS
If this parameter is set to "YES", the following condition must be met: The setting of this parameter must meet the following condition: "FallBack Start Time" > "Ring II Wait Time Before Switch" + "Ring II Try Rotating Duration Time". If this parameter is set to "NO", the following condition must be met: "FallBack Start Time" > "Ring I Wait Time Before Switch" + "Ring I Try Rotating Read & Duration Time". Write
Board
None
Read & Write
Ethernet port
None
Read & Write
BTS
None
Read & Write
TRX
None
Read & Write
Ethernet port
None
Read & Write
Not involved
PPP link
None
Read & Write
MP group
None
Read & Write
IP logical port
This index can correspond with any threshold (maximum value of 80) in the six queues. The following condition must be met: threshold x 64 x 1024 x logical port bandwidth < 4294967295(0xFFFFFFF Read & F). Write
BSC6900
None
Read & Write
Ethernet port
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
TRX
None
Read & Write
PPP link
None
Read & Write
MP link
None
Read & Write
None
None
Read & Write
BTS
The value of this parameter must be smaller than "Even charging voltage" and at least two volts higher than "DC undervoltage Read & alarm threshold". Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
This parameter is valid only when the ""INTERRATCELLRESE LEN"" parameter regarding the "SET GCELLHOBASIC" Read & command is set to YES. Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
None
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
Cell
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
This parameter is valid when "FHMODE" in the "SET GCELLHOPTP" command is not set to NO_FH.
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
Ethernet port
None
Read & Write
PPP link
None
Read & Write
MP group
None
Read & Write
IP logical port
None
Read & Write
Ethernet port
None
Read & Write
Not involved
BTS
None
Read & Write
Not involved
Cell
This parameter is valid only when "RXQCKFALLHOEN" in "SET GCELLHOBASIC" is set to YES. The following condition must be met: "FLTPARAA1" + "FLTPARAA2" + "FLTPARAA3" + "FLTPARAA4" + "FLTPARAA5" + "FLTPARAA6" + "FLTPARAA7" + Read & "FLTPARAA8" = 80. Write
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
This parameter is valid only when "RXQCKFALLHOEN" in "SET GCELLHOBASIC" Read & is set to YES. Write
BSC
None
Read & Write
Cell
None
BTS
None
None
None
Read & Write
BSC6900
None
BSC6900
None
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
None
None
Read & Write
None
None
Read & Write
BSC
None
Read & Write
MSC
None
Read & Write
Board
None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
MP group
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
TRX
None
Read & Write
Cell
None
Read & Write
Services are disrupted when the BCCH frequency of a cell is changed.
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
Cell
None
Cell
None
TRX
None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
None
The factor table index is configured by setting the value of "FTI" in "ADD Read & FACTORTABLE". Write
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
Cell
Cell
Cell
Cell
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "FULLTOHALFHODURA TION" >= "FULLTOHALFHOPERI Read & OD". Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "FULLTOHALFHOSTAT TIME" >= "FULLTOHALFHOLAST Read & TIME". Write
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC
None
Read & Write
BSC
None
Read & Write
Board
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
None
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Physical channel
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
None
None
Cell
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
Transmissi on resource group None Transmissi on resource group None
Read & Write
Not involved
Read & Write
Not involved
Cell
None
Read & Write
BSC6900
None
Read & Write
Not involved
BSC
None
Read & Write
Cell
This parameter is valid when "MEASURETYPE" is set to Read & EnhMeasReport. Write
Cell
None
Read & Write
Ethernet port
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
Cell
Cell
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "HALFTOFULLHOSTAT TIME" >= "HALFTOFULLHOLAST Read & TIME". Write
Cell
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "HALFTOFULLHOSTAT TIME" >= "HALFTOFULLHOLAST Read & TIME". Write
BTS
None
Read & Write
BTS
None
Read & Write
SCTP link None
Read & Write
BTS
None
Read & Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "HCSSTATTIME" >= Read & "HCSLASTTIME". Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "HCSSTATTIME" >= Read & "HCSLASTTIME". Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
Cell
This parameter is valid only when "HIGHPRIUSERQUALFI Read & RST" is set to YES. Write
BSC
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
Cell
Cell
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
The value of this parameter must be the same as that of "HOCTRLSWITCH" in Read & "SET GCELLHOBASIC". Write
Cell
When parameter ""Quick handover enable"" is configured to "YES",then parameter ""Handover Direction Forecast Enable"" can be configured to "YES".Furthermore,befor e open "Handover Direction Forecast Enable", parameter ""Chain Neighbour Cell Type"" of cell should be Read & configured correctly. Write
Cell
"Handover Direction Forecast Statistic Times" >= "Handover Direction Read & Forecast Last Times" Write
Cell
"Handover Direction Forecast Statistic Times" >= "Handover Direction Read & Forecast Last Times" Write
Cell
This parameter is valid only when "QUICKHOEN" in "SET GCELLHOBASIC" is set Read & to YES. Write
Cell
This parameter is valid only when "BET3GHOEN" is set to YES. The following condition must be met: "HOSTAT3G" >= Read & "HODURT3G". Write
Cell
This parameter is valid only when "BET3GHOEN" is set to YES. The following condition must be met: "HOSTAT3GTDD" >= Read & "HODURT3GTDD". Write
Cell
This parameter is valid only when the following conditions are met: 1. The ""INTERRATOUTBSCH OEN "" regarding the "SET GCELLHOBASIC" command is set to YES. 2. The ""BET3GHOEN"" parameter is set to YES. 3. The ""FDDREP"" parameter regarding the "SET GCELLCCUTRANSYS" Read & command is set to EcNo. Write
Cell
This parameter is valid only when "QUICKHOEN" in "SET GCELLHOBASIC" is set to YES. The following condition must be met: "HOSTATICTIME" >= Read & "HOLASTTIME". Write
Cell
None
Read & Write
Cell
Cell
This parameter is valid only when "LOWRXLEVOLFORBID Read & SWITCH" is set to ON. Write
Cell
Cell
Read & Write
Cell
None
Read & Write
Not involved
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
This parameter is valid only when "HOOPTSEL" is set to Read & Pre_2G_CellThres. Write
BSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Not involved
TRX
This parameter depends on "FHMODE" in "SET GCELLHOPTP". This parameter can be set to BaseBand_FH only when "FHMODE" is set to BaseBand_FH or Hybrid_FH. This parameter can be set to RF_FH only when "FHMODE" is set to Read & RF_FH or Hybrid_FH. Write
If traffic handover fails after the modification of the parameter, the service is interrupted.
Cell
None
Read & Write
BSC6900
None
Read & Write
Cell
This parameter is valid only when the following conditions are met: 1. The ""INTERRATOUTBSCH OEN"" regarding the "SET GCELLHOBASIC" command is set to YES. 2. The ""BET3GHOEN"" parameter is set to YES. 3. The ""FDDREP"" parameter regarding the "SET GCELLCCUTRANSYS" command is set to Read & RSCP. Write
MSC
None
Read & Write
Cell
This parameter is valid only when "INTERRATOUTBSCHO EN" is set to YES and "BET3GHOEN" is set to YES. The following condition must be met: "HOSTAT3G" >= Read & "HODURT3G". Write
Cell
This parameter is valid only when "INTERRATOUTBSCHO EN" is set to YES and "BET3GHOEN" is set to YES. The following condition must be met: "HOSTAT3GTDD" >= Read & "HODURT3GTDD". Write
Cell
This parameter is valid only when "QUICKHOEN" in "SET GCELLHOBASIC" is set to YES. The following condition must be met: "HOSTATICTIME" >= Read & "HOLASTTIME". Write
SCCP
None
Read & Write
BTS
When the BTS or cell is activated,the host type of OPC must be single or primary if the host type of BTS is single. Otherwise, the host type of OPC must be consistent with that of Read & the BTS. Write
Cell
None
Read & Write
Cell
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
Cell
This parameter is valid only when "GRADEACCALLOW" is Read & set to YES. Write
BTS
None
Read & Write
BTS
The value of this parameter must be smaller than "DC Undervoltage Alarm Threshold".
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
Cell
This parameter is valid when "FHMODE" in the "SET GCELLHOPTP" command is not set to NO_FH.
Read & Write
BTS
None
Read & Write
Current BFD session
None
Read & Write
BTS
The value of this parameter must be greater than "Low Temperature Critical Point".
Read & Write
BTS
None
Read & Write
BTS
None
Board
None
Board
None
Read & Write
Board
None
Read & Write
BTS
The value of this parameter must be greater than "Lower Threshold of Humidity Alarm".
Read & Write
BTS
The value of this parameter must be greater than "Lower Threshold of Humidity Alarm".
Read & Write
BTS
The value of this parameter must be smaller than "Upper Threshold of Humidity Alarm".
Read & Write
BTS
The value of this parameter must be smaller than "Upper Threshold of Humidity Alarm".
Read & Write
BTS
None
Read & Write
SCCP
None
None
None
None
None
Read & Write
None
None
Read & Write
SCCP
None
Read & Write
Cell
This parameter is valid only when "IBCASOFTBLKSWITC H" is set to YES.
Read & Write
Cell
This parameter is valid only when "IBCASOFTBLKSWITC H" is set to YES.
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
IP path
Read & Write
BSC
None
Read & Write
Not involved
BSC
None
Read & Write
Not involved
BSC
None
Read & Write
Not involved
BSC6900
None
Read & Write
BSC6900
None
BTS
None
Board
None
Read & Write
None
Cell
Read & None Write This parameter is one of the conditions for the dynamic conversion of the TCHF to the SDCCH. In addition to the condition that the number of idle SDCCHs should be smaller than or equal to "IDLESDTHRES", the following three conditions must be met to trigger the conversion from the TCHF to the SDCCH: 1. "SDDYN" in "SET GCELLBASICPARA" is set to YES. 2. In the cell, the value of (number of idle TCHFs + number of idle TCHHs/2) is greater than four and is greater than the number of TRXs. Idle TCHFs exist in the cell. 3. Number of SDCCHs + Read & 8 < "CELLMAXSD". Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Not involved
Cell
None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Not involved
None
None
Read & Write
None
None
Read & Write
BSC
None
Read & Write
Not involved
Subsystem None
Read & Write
Not involved
BSC
None
Read & Write
Not involved
Cell
None
Read & Write
IP route
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
Cell
BSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
Read & Write
Cell
This parameter is valid only when "IMMASSTAALLOW" is set to YES.
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
This parameter is valid only when "IDXTYPE" is Read & Subsystem set to BYIMSI. Write
Not involved
Cell
None
Read & Write
BSC6900
None
BSC6900
None
Cell
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "INTRACELLFHHOEN" is set to YES. The following condition must be met: "INFHHOSTAT" Read & >= "INFHHOLAST". Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "INTRACELLFHHOEN" is set to YES. The following condition must be met: "INFHHOSTAT" Read & >= "INFHHOLAST". Write
BSC
Set when Allow Info Exchange at Iur-g is set to Yes
Board
None
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "INTRACELLFHHOEN" Read & is set to YES. Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "INTRACELLFHHOEN" Read & is set to YES. Write
TRX
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
Cell
Read & Write
Cell
BSC6900
None
BSC6900
None
Cell
Read & Write
Cell
This parameter is valid only when "INNLOADHOEN" is set Read & to YES. Write
Cell
This parameter is valid only when "INNLOADHOEN" is set Read & to YES. Write
Cell
This parameter is valid only when "OUTLOADHOENABLE" Read & is set to YES. Write
BSC
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
This parameter is valid only when "SIGCHANHOEN" in "SET GCELLHOBASIC" Read & is set to YES. Write
BSC
None
Read & Write
Not involved
BTS
None
Read & Write
BSC
None
Read & Write
Not involved
BTS
None
Read & Write
Cell
None
Read & Write
Cell
Inter-layer HO threshold of the serving cell = "Inter-layer HO threshold" - "Inter-layer HO Hysteresis". Inter-layer HO threshold of the neighboring cell = "Inter-layer HO threshold" + "Adjacent Cell Inter-layer HO Hysteresis" - 64. The value of "Inter-layer HO threshold" can be set through "SET Read & GCELLHOBASIC". Write
Cell
None
Read & Write
Cell
When "Current HO Control Algorithm" in "SET GCELLHOBASIC" is set to HOALGORITHM1(Hand over algorithm I), "Intercell HO Hysteresis" should be set within the range of 64-127. When "Current HO Control Algorithm" in "SET GCELLHOBASIC" is set to HOALGORITHM2(Hand over algorithm II), "Intercell HO Hysteresis" should be set within the Read & range of 0-127. Write
Cell
This parameter is valid only when "HOCTRLSWITCH" in "SET GCELLHOBASIC" is set to Read & HOALGORITHM2. Write
Cell
This parameter is valid only when "INTERFHOEN" is set to YES and "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "INTERFERESTATTIME " >= "INTERFERELASTTIME Read & ". Write
Cell
This parameter is valid only when "INTERFHOEN" is set to YES and "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "INTERFERESTATTIME " >= "INTERFERELASTTIME Read & ". Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
The setting of this parameter must meet the following condition: "INTERFTHRES0" > Read & "INTERFTHRES1". Write
Cell
Cell
Cell
Cell
Cell
BSC6900
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
Cell
When "Inter-RAT In BSC Handover Enable" is set to NO, this parameter Read & must be set to NO. Write
Not involved
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
BSC
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
Cell
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "INTRACELLHOEN" Read & is set to YES. Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Cell
None
None
None
BSC6900
None
Read & Write
NSE
None
Read & Write
Not involved
NSE
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
IP path
The "IPADDR" in "ADD IPPATH" can not be at one network segment with the peer IP address of SCTPLNK or IPPATH whose local IP address is device IP address of FG2/GOU in this subrack;"IPADDR" and "PEERIPADDR" in "ADD IPPATH" must be at one network segment;("IPADDR","PE ERIPADDR","PEERMAS K" in "ADD IPPATH") conflicts with other IPPATH whose type is Read & IUPS. Write
Not involved
BSC6900
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
Ethernet port
None
Not involved
BSC
None
BSC
None
BTS
The setting of this parameter cannot be duplicate with "Slave Clock Server IP Address".
BSC
None
BTS
The value of this parameter cannot be the same as "Master Clock Read & Server IP Address". Write Read & Write Read & Write
BSC
None
BSC
None
Ethernet port
None
Read & Write
Ethernet port
None
Read & Write
PPP link
None
Read & Write
MP group
None
Read & Write
Ethernet port
None
Read & Write
Not involved
Ethernet port
None
Not involved
None
None
BTS
This parameter is valid only when "SERVICEMODE" in "MOD BTS" is set to IP.
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
BTS
If the redundancy configuration mode is not supported, only one clock server can be configured. Otherwise, two clock servers can be Read & configured. Write If the redundancy configuration mode is not supported, only one clock server can be configured. Otherwise, two clock servers can be Read & configured. Write
BTS
BTS
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Read & Write
Not involved
Cell
None
Read & Write
TRX
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
NSE
None
Read & Write
Not involved
IP Path
None
Read & Write
BSC6900
None
Read & Write
None
None
BTS
None
BTS
This parameter can be set to YES only when "BssLsGenMode" in "SET BSSLS" is set to BTSPRIORITY, BSCPRIORITY, or BTSONLY.
Read & Write
BSC
None
Read & Write
None
None
Read & Write
None
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
Not involved
IP route
None
Read & Write
TRX
This parameter is valid only when "IUOTP" in "MOD GCELL" is set to Concentric_cell.
Read & Write
Cell
None
Read & Write
Cell
The following condition must be met: "IUOHOSTATIME" >= "IUOHODURATIME".
Read & Write
Cell
The following condition must be met: "IUOHOSTATIME" >= "IUOHODURATIME".
Read & Write
Cell
None
Read & Write
Board
None
Read & Write
None
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
None
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Read & Write
None
None
Read & Write
None
None
Read & Write
Board
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
MSP protect group
None
Read & Write
Cell
None
Read & Write
PPP link
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Ethernet port
None
Read & Write
Not involved
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
None
None
Read & Write
Not involved
None
None
Read & Write
Not involved
IP logical port
None
Read & Write
IP logical port
None
Read & Write
IP logical port
None
Read & Write
IP logical port
None
Read & Write
IP logical port
None
Read & Write
Cell
None
Read & Write
Cell
There are four network layers, that is, layer 1 to layer 4. A lower layer No. indicates a higher priority. The cell priority is determined by both the network layer and the Read & "PRIOR" parameter. Write
Cell
The parameter is independent of "Load Handover Support" and " Enhanced Load HO Read & Allowed". Write
BSC
Lb Congestion Protection Timer 1<Lb Congestion Protection Timer 2
Read & Write
BSC
Lb Congestion Protection Timer 1<Lb Congestion Protection Timer 2
Read & Write
BSC
If this parameter is not set to CLOSE, it value must not be the same as "LDRSND", "LDRTRD", Read & or "LDRFST". Write
BSC
If this parameter is not set to CLOSE, it value must not be the same as "LDRSND", "LDRTRD", Read & or "LDRFOUH". Write
BSC
If this parameter is not set to CLOSE, it value must not be the same as "LDRFST", "LDRTRD", Read & or "LDRFOUH". Write
SCCP
None
Not involved
BSC6900
None
BSC6900
None
BSC6900
None
Not involved
Ethernet port
None
Read & Write
Not involved
Cell
None
Read & Write
Cell
Cell
None
Read & Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "LEVHOEN" is set to YES. The following condition must be met: "LEVSTAT" >= Read & "LEVLAST". Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "LEVHOEN" is set to YES. The following condition must be met: "LEVSTAT" >= Read & "LEVLAST". Write
None
None
Read & Write
None
None
Read & Write
Board
None
Read & Write
None
None
Read & Write
None
None
Read & Write
Not involved
BTS
None
Read & Write
None
None
Read & Write
None
None
Read & Write
LAPDLNK None
Read & Write
Not involved
None
None
Read & Write
MTP3 link None
Read & Write
Not involved
None
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Board
None
Read & Write
BSC
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
SCCP
None
Read & Write
SCCP
None
Read & Write
Cell
When the cell is a 2G external cell, this parameter is valid only when the "" OutBscLoadHoEn"" parameter regarding the "SET GCELLHOAD" command is set to YES. When the cell is a 3G external cell, this parameter is valid only when either of the following conditions is met: 1. The ""INTERRATOUTBSCH OEN"" parameter regarding the "SET GCELLHOBASIC" is set to YES and the ""OutSysLoadHoEn "" parameter regarding the "SET GCELLHOINTERRATLD B" command is set to YES. 2. The ""InterRatServiceLoadHo Switch"" parameter is not set to OFF. When the cell is under the BSC, this parameter is valid only when the Read & ""LoadHoEn"" parameter Write
MSC
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
Cell
This parameter can be set only when "Load Handover Support" is set Read & to Yes. Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
The parameter value cannot be larger than the value of "PBGT HO Threshold". The parameter takes effect only when "Enhanced Load HO Allowed" is Read & enabled. Write
Cell
Cell
Cell
This parameter is valid only when "LOADHOEN" in "SET GCELLHOBASIC" is set Read & to YES. Write
Cell
This parameter is valid only when "LOADHOEN" in "SET GCELLHOBASIC" is set to YES. The value of this parameter must be smaller than Read & "LOADOFFSET". Write
Cell
The parameter takes effect only when the enhanced load handover Read & algorithm is enabled. Write
Cell
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
The parameter is independent of "Load Handover Support" and "Enhanced Load HO Allowed".
BTS
None
BSC
None
Read & Write
BSC6900
None
Read & Write
Not involved
MP group
None
Read & Write
BTS
The IP address must be in the same network segment as "Peer IP Read & address". Write
BTS
The IP address must be in the same network segment as "Peer IP Read & address". Write
NSE
None
Read & Write
Not involved
BSC
None
Read & Write
BTS
None
Not involved
BTS
None
BSC6900
None
Read & Write
SCTP link None
Read & Write
SCTP link None
Read & Write
BSC6900
None
Read & Write
When the value of "MODE" in "ADD SCTPLNK" is set to Client, this parameter SCTP link can be modified.
Read & Write
BSC6900
None
Read & Write
Not involved
None
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
This parameter determines whether "LOGPORTSN" and "LOGPORTNO" in "ADD Read & SCTP link SCTPLNK" are valid. Write
When the value of "LOGPORTFLAG" in "ADD SCTPLNK" is set to ON, this parameter is SCTP link valid.
Read & Write
When the value of "LOGPORTFLAG" in "ADD SCTPLNK" is set to ON, this parameter is SCTP link valid.
Read & Write
Board
None
Read & Write
Board
None
Board
None
BSC6900
None
Read & Write
None
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
None
None
Read & Write
Not involved
None
None
Not involved
None
None
BC
None
Read & Write
E1/T1 port None
Read & Write
LAPDLNK None
Read & Write
Not involved
Cell
None
BSC
None
BSC
None
Read & Write
E1/T1 port None
Read & Write
Loopback optical port None
BSC
None
IP logical port
None
Read & Write
Cell
This parameter is valid when "FLEXABISMODE" in the "MOD BTS" Read & command is set to YES. Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
IP path
When the value of "CARRYFLAG" in "ADD IPPATH" is set to IP LGCPORT, this Read & parameter is valid. Write
IP logical port
None
Read & Write
Not involved
IP logical port
None
Read & Write
Not involved
IP path
When the value of "CARRYFLAG" in "ADD IPPATH" is set to IP LGCPORT, this Read & parameter is valid. Write
ATM logical port None
Read & Write
Not involved
Cell
None
Read & Write
BTS
None
Read & Write
BTS
The value of this parameter must be smaller than "DC Undervoltage Alarm Threshold".
Read & Write
BSC
If this parameter is not set to CLOSE, it value must not be the same as "LDRSND", "LDRFST", Read & or "LDRFOUH". Write
BSC6900
None
Read & Write
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BTS
The value of this parameter must be smaller than "High Temperature Critical Point".
Read & Write
BTS
None
Read & Write
Cell
The setting of this parameter must meet the following conditions: "LTFERLOWTH" < "LTFERTGT"; "LTFERLOWTH" < Read & "LTFERUPTH". Write
Cell
The setting of this parameter must meet the following conditions: "LTFERLOWTH" < "LTFERTGT"; "LTFERTGT" < Read & "LTFERUPTH". Write
Cell
The setting of this parameter must meet the following conditions: "LTFERUPTH" > "LTFERTGT"; "LTFERUPTH" > Read & "LTFERLOWTH". Write
Cell
None
Read & Write
Board
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
SCTP link None
None
None
Ethernet port
None
Read & Write
Ethernet port
None
Read & Write
Cell
None
Read & Write
Board
None
Read & Write
Not involved
Cell
This parameter is valid when " MAINBCCHPWRDTEN " in the " SET GCELLOTHEXT " Read & command is set to YES. Write
Cell
None
Read & Write
Cell
Cell
Cell
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
Cell
This parameter is valid only when "IBCAALLOWED" in "SET GCELLCHMGAD" Read & is set to YES. Write
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Ethernet port
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
PPP link
None
Read & Write
Not involved
MP group
None
Read & Write
BSC6900
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
BSC
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
SCTP link None
Read & Write
IP logical port
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BTS
Cell
None
Read & Write
Cell
None
Read & Write
None
None
Read & Write
BSC
None
Read & Write
PPP link
None
Read & Write
MP group
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
SCTP link None
Read & Write
BSC
This parameter is valid only when "TYPE" in "SET BSCPCUTYPE" is Read & set to OUTER. Write
TRX
None
Read & Write
Cell
None
Read & Write
BSC
None
BSC6900
None
BTS
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
PPP link
None
Read & Write
MP group
None
Read & Write
Cell
Cell
Cell
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
None
None
Read & Write
TRX
None
Read & Write
None
None
Read & Write
Not involved
Cell
This parameter is valid when "PWRCTRLSW" in the "SET GCELLPWRBASIC" command is set to Read & PWR2. Write Read & Write
BSC6900
None
None
None
Read & Write
Not involved
None
None
Read & Write
Not involved
Cell
None
Read & Write
Cell
Read & Write
Cell
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
MP group
None
Read & Write
BTS
This parameter is required when "MLPPP type" is set to "MCPPP" with the "ADD BTSMPGRP".
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BTS
"BTSTYPE" identifies the value range of this parameter. The number of cabinets supported by the BTS depends on the type of the BTS. For details, see the parameter description of Read & the command. Write
Cell
None
Read & Write
BTS
None
Read & Write
Board
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
Cell
None
Read & Write
BSC
Set when Allow Common Measurement at Iur-g is Read & set to Yes Write
Cell
None
Read & Write
Ethernet port
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
Ethernet port
None
Read & Write
MP group
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
IP logical port
None
Read & Write
Cell
None
Read & Write
Cell
This parameter is based on "HOCDCMINDWPWR" and "HOCDCMINUPPWR". Different offset can be set for different neighboring cells. The following condition must be met for a neighboring cell to be added into the candidate cell queue: Neighboring cell uplink level >= ("HOCDCMINUPPWR" + "MINOFFSET"); Neighboring cell downlink level >= ("HOCDCMINDWPWR" Read & + "MINOFFSET"). Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
Cell
This parameter is valid only when "SDDYN" in "SET GCELLBASICPARA" is set to YES.
Read & Write
Cell
A 3G cell can be added into the candidate cell queue when the following conditions are met: "INTERRATOUTBSCHO EN" is set to YES; "BET3GHOEN" is set to YES; the RSCP of the 3G cell for a period of time is greater than the sum of "HORSCPTH3G" Read & and "RSCPOFF". Write
Ethernet port
None
Read & Write
Not involved
Current BFD session
None
Read & Write
Ethernet port
None
Read & Write
Current BFD session
None
Read & Write
Ethernet port
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
BSC6900
None
Read & Write
SCTP link None
BSC6900
None
Not involved
BSC6900
None
Read & Write
None
None
Read & Write
Not involved
MSP protect group
None
Read & Write
None
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
None
None
Read & Write
BTS
None
Read & Write
Cell
Ethernet port
None
Read & Write
Ethernet port
None
Read & Write
MP group
None
None
None
BTS
None
Read & Write
BTS
This parameter can be set to MODE5_1 or MODE6_1 only when "FLEXABISMODE" is set Read & to FLEX_ABIS. Write
BTS
None
Read & Write
BTS
None
Read & Write
MP group
None
Read & Write
None
None
Read & Write
None
None
Read & Write
Cell
Cell
None
Read & Write
Cell
Cell
This parameter must be set when "BTSMESRPTPREPRO C" is set to Read & BTS_PreprocessingN. Write
BTS
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
MSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
MSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
Cell
Cell
None
Read & Write
MSP protect group
None
Read & Write
Not involved
Cell
None
Read & Write
Cell
The value of this parameter must be smaller than or equal to "PDCH Downlink Multiplex Threshold".
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
BSC
None
Read & Write
E1/T1 port None
Read & Write
Not involved
MTP3 link None
Read & Write
Not involved
None
None
SCTP link None
Ethernet port
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
This parameter is valid when "TCMUTEDETECTFLA G" is set to YES.
Read & Write
Cell
This parameter is valid when "TCMUTEDETECTFLA G" is set to YES.
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Not involved
Cell
None
Read & Write
Not involved
MP group
None
Read & Write
MP group
None
Read & Write
None
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
Not involved
BTS
None
Read & Write
Cell
N200ESTAB must be set when "N200PARASWITCH" is Read & set to YES. Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BC
None
Read & Write
BC
None
Read & Write
BC
None
Read & Write
Cell
This parameter is valid only when "GPRS" is set to SupportAsInnPcu or Read & SupportAsExtPcu. Write Read & Write Read & Write Read & Write
None
None
None
None
None
None
None
None
None
None
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
None
None
BSC
None
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Cell
None
Cell
None
Cell
None
Cell
None
Cell
None
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
BSC
None
Read & Write
Cell
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
Cell
BSC
Read & None The following condition Write must be met: "NcellInterFLevelThres1" > "NcellInterFLevelThres0" Read & . The following condition Write must be met: "NcellInterFLevelThres2" > "NcellInterFLevelThres1" > "NcellInterFLevelThres0" Read & . The following condition Write must be met: "NcellInterFLevelThres3" > "NcellInterFLevelThres2" > "NcellInterFLevelThres1" Read & . Write
BSC
BSC
BSC
The following condition must be met: "NcellInterFLevelThres4" > "NcellInterFLevelThres3" > "NcellInterFLevelThres2" Read & . The following condition Write must be met: "NcellInterFLevelThres5" > "NcellInterFLevelThres4" > "NcellInterFLevelThres3" Read & . The following condition Write must be met: "NcellInterFLevelThres6" > "NcellInterFLevelThres5" > "NcellInterFLevelThres4" Read & . The following condition Write must be met: "NcellInterFLevelThres7" > "NcellInterFLevelThres6" > "NcellInterFLevelThres5" Read & . The following condition Write must be met: "NcellInterFLevelThres7" > "NcellInterFLevelThres6" Read & . Write The setting of this parameter must meet the following condition: "NCHSTARTBLOCK"" <= Read & "NCHOCBLOCKNUM". Write
BSC
BSC
BSC
BSC
Cell
Cell
The setting of this parameter must meet the following condition: "NCHSTARTBLOCK"" <= Read & "NCHOCBLOCKNUM". Write
Cell
None
Read & Write
SCCP
None
None
None
Cell
None
BSC6900
None
Not involved
IP route
None
Read & Write
Not involved
None
None
Read & Write
Not involved
BTS
None
Read & Write
SCCP
This parameter depends Read & on network planning. Write
Not involved
None
None
Read & Write
Cell
None
Read & Write
BTS
The value range of this parameter varies with BTS type. Different types of BTSs support a different number of Read & cabinets. Write The value range of this parameter varies with BTS type.
BTS
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Cell
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "NOAMRFULLTOHALF HOALLOW" is set to Read & YES. Write
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Cell
Adjacent node
None
Read & Write
Not involved
Cell
This parameter is valid only when "NODLMRHOEN" in "SET GCELLHOEMG" is Read & set to YES. Write
Cell
None
Read & Write
Cell
This parameter is valid only when "NODLMRHOEN" in "SET GCELLHOEMG" is Read & set to YES. Write
BTS
None
Read & Write
Cell
Cell
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
BTS
The value of this parameter must be 8C smaller than "Derating TEMP Threshold".
Read & Write
BSC
None
Read & Write
TRX
BTS
This parameter is valid only when "ENABLE" is set to YES.
Read & Write
None
None
Read & Write
Not involved
Cell
Read & Write
Cell
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
NSE
None
Read & Write
Not involved
Cell
None
Read & Write
Cell
Cell
None
Read & Write
NSVC
None
Read & Write
Not involved
NSVC
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Ethernet port
None
Read & Write
PPP link
None
Read & Write
MP group
None
Read & Write
IP logical port
None
Read & Write
Ethernet port
None
Read & Write
Not involved
Port queue None
Read & Write
Port queue None
Read & Write Read & Write Read & Write Read & Write
None
None
None
None
BSC
None
BSC
None
Read & Write
Not involved
BSC6900
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
Cell
None
Read & Write
Cell
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
Not involved
BSC
None
Read & Write
BSC6900
None
Read & Write
Not involved
Transport channel
None
Read & Write
Transport channel
None
Read & Write
BSC6900
None
Read & Write
Not involved
BSC
None
Read & Write
BSC6900
None
Read & Write
Not involved
BTS
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
E1/T1 link None
Read & Write
Not involved
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
None
None
Read & Write
E1/T1 link None
Read & Write
E1/T1 link None
Read & Write
E1/T1 link None
Read & Write
PBCIC
None
Read & Write
Not involved
BSC
None
Read & Write
Cell
Read & Write
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell and "OPTILAYER" is set to SysOpt.
Read & Write
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell and "OPTILAYER" is set to SysOpt.
Read & Write
TRX
This parameter is valid only when "TRXPRIALLOW" is set to YES.
Read & Write
Board
None
Read & Write
None
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
Cell
Read & Write
Cell
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell. The following condition must be met: "OUTSERIOVERLDTHR ED" > "OUTGENOVERLDTHR ED" > "OUTLOWLOADTHRED Read & ". Write
TRX
None
Read & Write
Cell
Read & Write
Cell
Read & Write
Cell
This parameter is valid only when "OUTLOADHOENABLE" Read & is set to YES. Write
Cell
This parameter is valid only when "OUTLOADHOENABLE" Read & is set to YES. Write This parameter is valid only when "OUTLOADHOENABLE" is set to YES and "IUOTP" in "ADD GCELL" is set to Read & EDB_cell. Write
Cell
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell. The following condition must be met: "OUTGENOVERLDTHR ED" > "OUTLOWLOADTHRED Read & ". Write
BSC
None
Read & Write
Not involved
BSC
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to EDB_cell. The following condition must be met: "OUTSERIOVERLDTHR ED" > "OUTGENOVERLDTHR ED" > "OUTLOWLOADTHRED Read & ". Write
Cell
None
Read & Write
BSC
None
Read & Write
Not involved
BSC
None
Read & Write
Not involved
BSC
None
Read & Write
Not involved
Cell
None
Read & Write
BSC
This parameter is valid only when "OUTSYSSERVICEHOE Read & N" is set to YES. Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
BTS
The value of this parameter must be 8C greater than "Normal Read & Work TEMP Threshold". Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
This parameter is valid when "ALLOWG2FLOWCTRA LGL" in the "SET BSCFCPARA" command Read & is set to YES. Write
Cell
None
Read & Write
Cell
This parameter is valid when "ALLOWG2FLOWCTRA LGL" in the "SET BSCFCPARA" command Read & is set to YES. Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
TRX
This parameter is valid only when "BSCDynSwitchTrxPAAll ow" in "SET BSCDSTPA","DYNOpen TrxPower" in "SET GCELLBASICPARA" and "CPS" are set to Read & YES. Write
BTS
None
Read & Write
BTS
None
Read & Write
IP path
None
Read & Write
Not involved
IP path
None
Read & Write
Not involved
IP path
None
Read & Write
Not involved
Cell
Read & Write
Cell
IP path
None
Read & Write
Not involved
None
None
Read & Write
Cell
None
Read & Write
Cell
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "PBGTHOEN" is set to YES. The following condition must be met: "PBGTSTAT" >= Read & "PBGTLAST". Write
Cell
None
Read & Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM1 and "PBGTHOEN" is set to YES. The following condition must be met: "PBGTSTAT" >= Read & "PBGTLAST". Write
BSC
Cell
Cell
None
Read & Write
PBCIC
None
Read & Write
Not involved
BSC
None
Read & Write
Not involved
PBE1T1
None
Read & Write
Not involved
Cell
This parameter is valid only when "GPRS" is set Read & to SupportAsExtPcu. Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
SCCP
None
Read & Write
BSC
None
BTS
None
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
Not involved
MP group
None
Read & Write
None
None
Read & Write
Not involved
BTS
The peer IP address and the local IP address specified by "Local IP address" must be on the Read & same network segment. Write
BTS
The peer IP address and the local IP address specified by "Local IP address" must be on the Read & same network segment. Write
SCTP link None
Read & Write
SCTP link None
Read & Write
IP path
"IPADDR" and "PEERIPADDR" in "ADD IPPATH" must be at one network segment;("IPADDR","PE ERIPADDR","PEERMAS K" in "ADD IPPATH") conflicts with other IPPATH whose type is Read & IUPS. Write
Not involved
IP path
("IPADDR","PEERIPAD DR","PEERMASK" in "ADD IPPATH") conflicts with other IPPATH Read & whose type is IUPS. Write
Not involved
SCTP link None
None
None
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
IP path
Read & Write
BSC
None
Read & Write
PPP link
None
Read & Write
MP link
None
Read & Write
BTS
None
Read & Write
NSE
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
Board
The phb of the traffic's transmission path is determined like this: if the phb of this transmission path is QOS, use the traffic's phb from TRMMAP; if the phb of this transmission path is BE,AF11,AF12,AF13,AF 21,AF22,AF23,AF31,AF 32,AF33,AF41,AF42,AF 43,EF, use the phb of Read & transmission path. Write
Not involved
IP Path
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
BC
None
BTS
This parameter must meet the following requirements: The sum of the value of "Max subframe length" and 8 must be smaller than the Read & value of this parameter. Write
Cell
Ethernet port
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Cell
None
Read & Write
TRX
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
TRX
None
Read & Write
Cell
None
Read & Write
TRX
None
Read & Write
IP logical port
None
Read & Write
IP logical port
None
Board
None
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
None
None
None
None
None
None
Read & Write
E1/T1 link None
Read & Write
Not involved
E1/T1 link None
Read & Write
Not involved
E1/T1 link None
Read & Write
PBE1T1
None
Read & Write
Not involved
BSC6900
None
Read & Write
Board
None
Read & Write
Not involved
E1/T1 port None
Read & Write
None
None
Read & Write
None
None
Read & Write
Loopback optical port None
BSC6900
None
Board
None
Read & Write
Not involved
Read & Write
Ethernet port
If port 0 or port 4 of the FG2a board is set to the GE port, the port number can only be 0 or 4. Otherwise, the port number ranges from 0 to 7. If only port 0 is set to the GE port, ports 1-3 are unavailable. If port 4 is set to the GE port, ports 5-7 are Read & unavailable. Write
Not involved
IP logical port
None
Read & Write
Not involved
None
None
Read & Write
Not involved
E1/T1 port None
Read & Write
Not involved
E1/T1 port None
Read & Write
Not involved
E1/T1 port None
Read & Write
Not involved
PBSL
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
PPP link
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
BTS
None
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
BTS
None
Read & Write
Not involved
BTS
None
Not involved
BTS
None
BTS
None
Read & Write
BSC6900
None
Read & Write
None
None
Read & Write
Ethernet port
None
Read & Write
Not involved
BTS
None
Read & Write
Cell
If this parameter is BCCHExt,"CCCH Blocks Reserved for AGCH" Read & must be more than 0. Write
None
None
Read & Write
BTS
None
Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write
None
None
None
None
None
None
None
None
None
None
None
None
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
TRX
None
Read & Write
TRX
None
Read & Write
Ethernet port
None
Read & Write
Ethernet port
None
Read & Write
PPP link
None
Read & Write
Not involved
MP link IP logical port
None
None
PPP link
None
Read & Write
Not involved
MP group
None
Read & Write
BSC6900
When the value of "PORTPROTYPE" in "ADD PORTFLOWCTRLPARA " is set to IP, this Read & parameter should be set. Write
BSC
None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
Cell
This parameter must be set when "BTSMESRPTPREPRO C" is set to BTS_Preprocessing. This parameter must be set to NO when "MPMODE" of the BTS that serving this cell is set to MODE4_1 and there are more than two Read & SDCCHs. Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Cell
None
Read & Write
Cell
This parameter, together with "LAYER", determines the priority of Read & the cell. Write
BTS
None
Read & Write
Cell
None
Read & Write
SCCP
None
Read & Write
None
None
Read & Write
IP route
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
BSC6900
None
BTS
None
Read & Write
SCCP
None
Read & Write
Not involved
BC
None
Read & Write
BTS
None
Read & Write
Not involved
Cell
This parameter is valid only when "TURNOFFENABLE" is set to YES.
Read & Write
BSC
None
Read & Write
E1/T1 port None
Read & Write
Not involved
Board
None
Read & Write
Not involved
Read & Write
BSC
This parameter is valid only when "PS CHR Record Switch" is set to on.
Read & Write
BSC
Read & Write
BSC
Read & Write
BSC
Read & Write
BSC
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
NSE
None
Read & Write
BSC6900
Read & Write
BSC6900
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
Read & Write
BSC6900
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
This parameter is valid only when "PSRCDSW" Read & is set to on. Write
Cell
The value of this parameter must be smaller than "RACH Busy Threshold" in the "SET GCELLCCBASIC" Read & command. Write
BTS
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
None
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
NSE
None
Not involved
BTS
None
E1/T1 port None
Read & Write
E1/T1 port None
Read & Write
E1/T1 port None
Read & Write
E1/T1 port None
Read & Write
BTS Ethernet port
None
None
BTS
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
BSC
None
BSC6900
None
BSC6900
None
Read & Write
None
None
Read & Write
BSC6900
None
None
None
None
None
Read & Write
None
None
Read & Write
Cell
None
Read & Write
Cell
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
BTS
Cell
None
Read & Write
TRX
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Port queue None
Read & Write
Port queue None
Read & Write
Port queue None
Read & Write
Port queue None
Read & Write
Port queue None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
This parameter is valid only when "QCKMVHOEN" in "SET GCELLHOBASIC" is set to YES. The following condition must be met: "QCKSTATCNT" >= Read & "QCKTRUECNT". Write
Cell
This parameter is valid only when "QCKMVHOEN" in "SET GCELLHOBASIC" is set Read & to YES. Write
Cell
This parameter is valid only when "QCKMVHOEN" in "SET GCELLHOBASIC" is set to YES. The following condition must be met: "QCKSTATCNT" >= Read & "QCKTRUECNT". Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
This parameter is valid only when "QTRUPWRSHARE" is not set to NONE. The following condition must be met: "QTRUDNPWRSTATTI ME" >= "QTRUDNPWRLASTTI Read & ME". Write
Cell
This parameter is valid only when "QTRUPWRSHARE" is not set to NONE. The following condition must be met: "QTRUDNPWRSTATTI ME" >= "QTRUDNPWRLASTTI Read & ME". Write
Cell
None
Read & Write
BTS
This parameter must be equal to or greater than 0.6x"CHKOFFTIMES" and equal to or less than Read & "CHKOFFTIMES". Write
BTS
This parameter must be equal to or greater than 0.6x"CHKONTIMES" and equal to or less than Read & "CHKONTIMES". Write
Cell
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
This parameter is valid only when "R0BatAllow" Read & is set to YES. Write
BTS
BTS
BTS
None
Read & Write
BTS
None
Read & Write
BTS
BTS
BTS
BTS
None
Read & Write
BTS
None
Read & Write
BTS
BTS
BTS
Cell
None
Read & Write
Cell
None
Read & Write
Cell
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
The value of this parameter must be smaller than "RACH Busy Threshold" in the "SET GCELLCCBASIC" Read & command. Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
TRX
None
Read & Write
IP logical port
None
Read & Write
Cell
None
Read & Write
Cell
This parameter is valid when "REASSEN" in the "SET GCELLCCBASIC" Read & command is set to YES. Write
Cell
Read & Write
Cell
Read & Write
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell and "ENIUO" is set to OFF.
Read & Write
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell and "ENIUO" is set to OFF.
Read & Write
Cell
Read & Write
BSC
None
Read & Write
IP logical port
None
Read & Write
Cell
Read & Write
Cell
Read & Write
Board
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Board
None
Board
None
Board
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
IP route
None
Read & Write
NSE
None
Read & Write
Not involved
Cell
None
Read & Write
Cell
None
Read & Write
Cell
This parameter is valid when "REPEATDLFASET" is set to YES.
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
This parameter is valid when "DYNOpenTrxPower" in the "SET GCELLBASICPARA" Read & command is set to YES. Write
BSC
None
Read & Write
BSC
This parameter is valid only when "ResetAlmDelaySwitch" is set to YES.
Read & Write
BSC6900
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
Not involved
BSC
None
Read & Write
BSC6900
None
Read & Write
PPP link
None
Read & Write
MP link
None
Read & Write
BSC6900
None
Read & Write
BSC
Set when Allow Common Measurement at Iur-g is set to Yes or Allow Info Exchange at Iur-g is set Read & to Yes Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
NSE
None
Read & Write
None
None
Read & Write
Cell
None
Read & Write
BSC
RMTTCATERTRANSM ODE must be set when "ISTCCENTRAL" in the "ADD SUBRACK" Read & command is set to YES. Write
Cell
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
None
None
Read & Write
BSC6900
None
Read & Write
BSC
None
Read & Write
Not involved
BSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
IP logical port
None
Read & Write
Cell
None
Read & Write
Cell
Read & Write
Cell
Read & Write
When the value of "ADDTORSCGRP" in "ADD AAL2PATH" is set to YES, this parameter is Read & AAL2 path valid. Write
Read & Write
Not involved
IP logical port
None
Read & Write
Not involved
Cell
None
Read & Write
Cell
A 3G cell can be added into the candidate cell queue when the following conditions are met: "INTERRATOUTBSCHO EN" is set to YES; "BET3GHOEN" is set to YES; the RSCP of the 3G cell for a period of time is greater than the sun of "HORSCPTH3G" Read & and "RSCPOFF". Write
Cell
None
Board
None
Board
None
Cell
None
Read & Write
Transport channel
None
Read & Write
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
Transport channel
None
Read & Write
BSC6900
None
Not involved
BTS
None
BSC6900
None
Read & Write
Not involved
BSC
None
Read & Write
None
None
Read & Write
BSC6900
None
Read & Write
SCCP
When the value of "SPCBITS" is set to BIT14 or BIT24, this parameter is valid.
Read & Write
PPP link
None
Read & Write
Cell
This parameter is valid only when "EMCPRILV" in "SET GCELLCCAD" is Read & not set to 15. Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC
None
Read & Write
MSP protect group
None
Read & Write
SCCP
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
BSC6900
None
Not involved
BSC6900
None
Not involved
BTS
None
Read & Write
SCTP link None
Read & Write
SCTP link None
Read & Write
The value to be set should be larger than the value of "RTOMIN" in "ADD SCTPLNK" but smaller than the value of Read & SCTP link "RTOMAX". Write
The value to be set should be larger than the value of "RTOMIN" in Read & SCTP link "ADD SCTPLNK". Write
The value to be set should be smaller than the value of "RTOMAX" SCTP link in "ADD SCTPLNK".
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
IP logical port
None
Read & Write
IP logical port
None
Read & Write
BTS
None
IP path
None
When "GRPT" in "ADD RSCGRP" is set to ATM or "BWMODE" is set to FULL_DUPLEX, this parameter is valid;The sum of "TxBw" and "RxBw" in "ADD RSCGRP" of upper class RSCGRP can not less than the "TxBw" and "AllBw" in "ADD RSCGRP"of lower class RSCGRP;The "TxBw" in "ADD RSCGRP" of upper class RSCGRP can not less than the "TxBw" in "ADD RSCGRP" of lower class RSCGRP, and the "RxBw" in "ADD RSCGRP" of upper class Transmissi RSCGRP can not less on than the "RxBw" in "ADD resource RSCGRP" of lower class Read & group RSCGRP. Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
TRX
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
TRX
None
Read & Write
Not involved
BTS
None
Read & Write
TRX
None
Read & Write
Not involved
BTS
None
BTS
None
TRX
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC6900
This parameter is required when "Default DPC" is set to NO.
Read & Write
Cell
Read & Write
Cell
This parameter is valid only when "SAICALLOWED" in "SET GCELLPWRBASIC" is set to YES.
Read & Write
Cell
BTS
None
Read & Write
Cell
Read & Write
Cell
Read & Write
Cell
1. This parameter is valid only when "TURNOFFENABLE" is set to ENABLE. 2. The setting of this parameter must meet the following condition: "SAMECVGCELLLOAD STATTM" >= "SAMECVGCELLLOADL Read & ASTTM". Write
Cell
This parameter is valid only when "TURNOFFENABLE" is set to YES. This parameter is valid only when "TURNOFFENABLE" is set to YES.
Read & Write
Cell
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
Not involved
Cell
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Cell
None
None
None
BSC6900
None
Read & Write
None
None
Read & Write
None
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
SCTP link None
Read & Write
Not involved
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
MSP protect group
None
None
None
BSC6900
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
MSP protect group
None
Read & Write
Cell
None
Read & Write
TRX
None
Read & Write
Cell
None
Read & Write
Cell
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
Not involved
MSP protect group
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
The value of this parameter must be smaller than "DC Voltage Read & Lower Threshold". Write
Cell
None
None
None
BSC
None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
MSC
None
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
BSC
None
Read & Write
BTS
None The value range of this parameter varies with "BTS Type". Different types of BTSs support different types of services.
Read & Write
BTS
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
Not involved
BSC
This parameter is valid when "SGSNPOOLALLOW" is Read & set to YES. Write
BSC
This parameter is valid when "SGSNPOOLALLOW" is Read & set to YES. Write
BSC
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Not involved
BTS
None
BSC6900
None
Read & Write
BTS
This parameter is valid only when the cell parameter "BAKPWRSAVMETHOD " is set to BYPWR and "SDFALG" in "SET GTRXDEV" is set to Read & ENABLE. Write
BSC
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
SCCP
None
Read & Write
Not involved
SCCP
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
NSE
None
Read & Write
NSE
None
Read & Write
BSC
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
None
None
Read & Write
Not involved
Cell
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
Ethernet port
None
Read & Write
None
None
Read & Write
Not involved
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Not involved
None
None
Read & Write
SCCP
None
Read & Write
BSC
None
Read & Write
BSC6900
None
Read & Write
BSC
None
Read & Write
BSC
None
None
None
BSC6900
None
Read & Write
None
The number of CPU usage sampling times is at least twice the size of "Fast judgement Read & window". Write
None
None
None
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
E1/T1 link None
Read & Write
Not involved
E1/T1 link None
Read & Write
Read & Write
Not involved
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Not involved
None
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Board
None
Read & Write
Not involved
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
TRX
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
SCCP
When the value of "SPDF" is set to WNF, this parameter is valid.
Read & Write
SCCP
This parameter depends Read & on network planning. Write
SCCP
When the value of "SPDF" is set to DNF, this parameter is valid.
Read & Write
Not involved
PBE1T1
None
Read & Write
SCCP
When the value of "SPDF" in "ADD N7DPC" is set to WNF, this parameter is valid.
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
Not involved
MSC
None
Read & Write
MSC
None
Read & Write
MSC
None
Read & Write
MSC
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Ethernet port
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
Cell
Cell
BSC
None
Read & Write
BSC6900
This parameter is required when "Trunking Read & MSC" is set to YES. Write
BSC
BSC
BSC
BSC
BSC
None
Read & Write
Cell
BTS
None
Read & Write
BSC6900
None
Read & Write
SCCP
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Cell
None
Cell
None
BSC6900
None
Read & Write
None
None
Read & Write
None
None
Read & Write
Cell Current BFD session
The value of this parameter must be the same as that of "HOCTRLSWITCH" in Read & "SET GCELLHOBASIC". Write
None
Read & Write
Not involved
Cell
None
Read & Write
Cell
None
Read & Write
Ethernet port
None
Read & Write
Not involved
Cell
None
Read & Write
E1/T1 port None
Read & Write
Not involved
None
None
Read & Write
E1/T1 port None
Read & Write
None
None
Read & Write
None
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
E1/T1 link None
BSC6900
None
Not involved
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Not involved
BSC
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
Not involved
BSC
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Control plane link
None
Read & Write
BSC6900
None
Read & Write
None
None
None
None
None
None
BSC6900
None
NSE
None
Read & Write
NSE
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
None
None
Read & Write
BSC
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
When the value of "OPMODE" of "BLK ACIC" is BYCICRANGE, the value of STARTTS Read & E1/T1 link needs to be set. Write
PBCIC
None
Read & Write
BSC
The setting of this parameter must meet the following condition: When "EndMonthDSTPA" and "StartMonthDSTPA" are set to the same value, "EndDayDSTPA" must be later than Read & "StartDayDSTPA". Write
BTS
The value of this parameter must be smaller than "Heater Read & shutdown Temperature". Write
BSC
The setting of this parameter must meet the following condition: "EndMonthDSTPA" is the same as or is later than Read & "StartMonthDSTPA". Write
BSC
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
BTS
Read & Write
BSC
This parameter is set only when "BSCDynSwitchTrxPAAll Read & ow" is set to YES. Write
When the value of "OPMODE" of "BLK ATERE1T1" is BYCICRANGE, the value of STARTTS E1/T1 link needs to be set.
Read & Write
When the value of "OPMODE" of "BLK AE1T1" is BYCICRANGE, the value of STARTTS E1/T1 link needs to be set.
BTS
None
BTS
None
Read & Write
BTS
None
Read & Write
E1/T1 link None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
BSC
To ensure that all the frequencies can be measured within 24 hours, the following condition must be met: ("PERIOD" x 15) x (total number of frequencies to be measured/"STEP") < Read & (24 x 60). Write
MTP3 link None
Not involved
None
None
Cell
None
Read & Write
Cell
None
Read & Write
BTS
Read & Write
SCCP
None
Read & Write
Not involved
BTS
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
If the added monitoring timeslot works at 64 kbit/s, the sub-timeslots are numbered from 0. If the added monitoring timeslot works at 32 kbit/s, the sub-timeslots are numbered from 0 or 4. If the added monitoring timeslot works at 16 kbit/s, the sub-timeslots are numbered from 0, 2, 4, or 6. If the added monitoring timeslot works at 8 kbit/s, the subtimeslots are numbered from any value among 0 Read & to 7. Write
BSC6900
None
Read & Write
BTS
None
Read & Write
BTS
If "Work Mode for Auto Download Activation" is "TMUAUTOACT", the BTS type must be consistent with the actual Read & BTS type. Write
When SUBBSC is selected for "BSC flag", this parameter should be Read & E1/T1 link set. Write
When SUBBSC is selected for "BSC flag", this parameter should be Read & E1/T1 link set. Write
None
None
Read & Write
None
None
Read & Write
BTS
This parameter must meet the following requirements: The sum of the value of "Max Subframe Length" and 8 must be smaller than the value of "Maximum Read & Frame Length". Write
BSC6900
None
BSC6900
None
Not involved
Cell
This parameter is valid when "FLEXABISMODE" in the "MOD BTS" Read & command is set to YES. Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
None
None
Read & Write
None
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
Cell
BSC
None
Read & Write
Cell
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
Not involved
Cell
None
Read & Write
NSE
None
Read & Write
NSE
None
Read & Write
None
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Not involved
BTS
None
BTS
None
BSC6900
None
None
None
BSC6900
None
BSC6900
None
Read & Write
None
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
SCTP link None
Read & Write
SCTP link None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Cell
This parameter is valid only when "UTRANCELLTYPE" is set to TDD.
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
None
None
Read & Write
Cell
None
None
Read & Write
BSC
None
Read & Write
None
None
Read & Write
None
None
Read & Write
BSC
None
Read & Write
None
None
Read & Write
MTP3 link None
Read & Write
MTP3 link None
Read & Write
MTP3 link None
Read & Write
MTP3 link None
Read & Write
MTP3 link None
Read & Write
MTP3 link None
Read & Write
BSC
None
Read & Write
None
None
Read & Write
BTS
The value of this parameter must be smaller than "T203".
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
The value of this parameter must be greater than "T200".
Read & Write
MTP3 link None
Read & Write
MTP3 link None
Read & Write
MTP3 link None
Read & Write
BSC
None The value of this parameter must be smaller than or equal to "Time2[S]".
Read & Write
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BC
None
Read & Write
MTP3 link None
Read & Write
BSC
None
Read & Write
MTP3 link None
Read & Write
BSC
None
Read & Write
MTP3 link None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
MTP3 link None
Read & Write
Cell
None
Read & Write
Cell
Read & Write
Cell
None
Read & Write
Cell
Read & Write
Cell
This parameter is valid only when "HOCTRLSWITCH" is set to HOALGORITHM2 and "TAHOEN" is set to YES. The following condition must be met: "TASTATTIME" >= Read & "TALASTTIME". Write
Cell
This parameter is valid only when "TAHOEN" in "SET GCELLHOBASIC" Read & is set to YES. Write
Cell
None
Read & Write
Cell
BSC6900
None
Read & Write
Cell
This parameter is valid only when "TAHOEN" is set to YES and "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "TASTATTIME" >= Read & "TALASTTIME". Write
Cell
This parameter is valid only when "IUOTP" in "ADD GCELL" is set to Concentric_cell. The following condition must be met: "TALIMIT" > Read & "TATHRES". Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
None
None
Read & Write
BTS
This parameter is valid only when "OMLBKUP" is set to YES.
Read & Write
BTS
This parameter must meet the following requirements: "FallBack Start Time" > "Ring I Wait Time Before Switch" + "Ring I Try Read & Rotating Duration Time". Write
MTP3 link None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
TRX
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
BSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
"TCHTRICBUSYOVERL AYTHR" and "TCHTRIBUSYUNDERL AYTHR" can be set only when "HRIUOLDRATESELAL Read & LOW" is set to YES. Write
Cell
"TCHTRICBUSYOVERL AYTHR" and "TCHTRIBUSYUNDERL AYTHR" can be set only when "HRIUOLDRATESELAL Read & LOW" is set to YES. Write
MTP3 link None
Read & Write
MTP3 link None
Read & Write
Not involved
Cell
None
Read & Write
BTS
None
Read & Write
Control plane link
None
Read & Write
Not involved
Cell
None
Read & Write
Control plane link
None
Read & Write
Not involved
Control plane link
None
Read & Write
Not involved
None
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
Control plane link
None
Read & Write
Control plane link
None
Read & Write
PBSL
None
None
None
None
None
Read & Write
None
None
Read & Write
BTS
This parameter must be at least 3C greater than "Lower ENV TEMP Alarm".
Read & Write
BTS
This parameter must be at least 4C greater than "Lower ENV TEMP Alarm".
Read & Write
BTS
This parameter must be at least 3C lower than "Upper ENV TEMP Alarm".
Read & Write
BTS
This parameter must be at least 4C lower than "Upper ENV TEMP Alarm".
Read & Write
BTS
None
Cell
None
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
Cell
The maximum length of this parameter is decided by "SCHEME": When "SCHEME" is set to BINARY, the length of this parameter should not extend 2462 bytes; otherwise, the length should not extend 1395 Read & bytes. Write
Board
None
Read & Write
None
None
Read & Write
Cell
None
Read & Write
BSC6900
None
BSC6900
None
BSC6900
None
Read & Write
BSC6900
None
Read & Write
None
None
Read & Write
BSC6900
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC6900
None
Read & Write
Not involved
BSC
None
Read & Write
Cell
This parameter is valid only when "TIGHTBCCHSWITCH" in "SET GCELLCHMGBASIC" is Read & set to ON. Write
Cell
Cell
This parameter is valid only when "TIGHTBCCHSWITCH" in "SET GCELLCHMGBASIC" is set to ON. The following condition must be met: "TIGHTBCCHHOSTATT IME" >= "TIGHTBCCHHOLASTTI Read & ME". Write
Cell
Cell
This parameter is valid only when "TIGHTBCCHSWITCH" in "SET GCELLCHMGBASIC" is set to ON. The following condition must be met: "TIGHTBCCHHOSTATT IME" >= "TIGHTBCCHHOLASTTI Read & ME". Write
Cell
Cell
None
Read & Write
Cell
None
Read & Write
BSC
This parameter is valid when "MSCPOOLALLOW" is set to YES.
Read & Write
BSC6900
None
BSC6900
None
BTS
None
Cell
None
Read & Write
Cell
None
Read & Write
Cell
Read & Write
Ethernet port
None
Read & Write
Not involved
None
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
BTS
None
Read & Write
Cell
None
Read & Write
Ethernet port
None
Read & Write
Not involved
Cell
None
Read & Write
Cell
None
Read & Write
Cell
Read & Write
Cell
None
Read & Write
BSC
This parameter is valid when "MSCPOOLALLOW" is set to YES.
Read & Write
BSC6900
None
Read & Write
This parameter is valid only when "IDXTYPE" is Read & Subsystem set to BYTLLI. Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
BTS
The value of this parameter must be at least two degrees smaller than "Temperature Alarm Upper Threshold".
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Not involved
None
The TRMMAP index is configured by setting the value of "TMI" in "ADD Read & TRMMAP". Write Read & Write Read & Write
BC
None
None
None
Cell
None
Read & Write
BSC6900
None
Read & Write
BSC
None
Read & Write
BSC6900
None
Read & Write
MTP3 link None
Read & Write
MTP3 link None
Read & Write
BSC6900
None
Read & Write
Not involved
ATERCON SL None
Read & Write
PBE1T1
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
SCCP
None
Read & Write
Not involved
BTS
None
Read & Write
BSC
None
Read & Write
Not involved
IP path
BSC6900
Read & None Write When the value of "ITFT" in "ADD TRMMAP" is set to IUB, IUR or IUCS, this Read & parameter is valid. Write
Not involved
Not involved
BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB, IUR or IUCS, this Read & parameter is valid. Write
Not involved
BSC6900
None
Not involved
BTS
None
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
Cell
None
Read & Write
Cell
Ethernet port
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
BSC6900
None
Read & Write
Not involved
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
PPP link
None
Read & Write
Not involved
None
None
Read & Write
IP logical port
None
Read & Write
Not involved
None
The TRM load threshold parameter must meet the following conditions: forward congestion recovery threshold < logical port bandwidth, backward congestion recovery threshold < Read & logical port bandwidth. Write
BTS
None
Read & Write
IP logical port
None
Read & Write
Not involved
None
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
Cell
None
None
None
Physical channel
None
Read & Write
If traffic handover fails after the modification of the parameter, the service is interrupted.
TRX
None
Read & Write
Not involved
BTS
None
Read & Write
Cell
None
Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write
Cell
None
Cell
None
Cell
None
Cell
None
Cell
None
Cell
None
Cell
None
Cell
None
Cell
None
Cell
None
Cell
None
Cell
None
Cell
None
Cell
None
Cell
None
Cell
None
Cell
None
Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write Read & Write
Cell
None
Cell
None
Cell
None
Cell
None
Cell
None
Cell
None
BSC
None
Read & Write
None
None
Read & Write
Physical channel
None
Read & Write
TRX
None
Read & Write
Not involved
BTS
None
Read & Write
TRX
None
Read & Write
Not involved
TRX
None
Read & Write
Not involved
Cell
None
Read & Write
TRX
None
Read & Write
Not involved
When the value of "OPMODE" of "BLK ATERE1T1" is BYCICVALUE, the value Read & E1/T1 link of TS needs to be set. Write
When the value of "OPMODE" of "BLK AE1T1" is BYCICVALUE, the value Read & E1/T1 link of TS needs to be set. Write
Cell
None
Read & Write
BC
None
Read & Write
BTS
None
Read & Write
PPP link
None
Read & Write
Not involved
MP link
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
Cell
None
E1/T1 port None
None
None
BTS
None
Read & Write
BSC6900
None
Read & Write
None
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
PBSL
None
Read & Write
Physical channel
None
Read & Write
TRX
None
Read & Write
BSC
The value of "Fast Flux Measurement Period" cannot be greater than that of "Fast Flux Measurement TBF Time".
Read & Write
BSC
None
Read & Write
BTS
If this parameter is set to 16K, "In-BSC Sub Timeslot No." and "OutBTS Sub Timeslot No." must be 0, 2, 4, or 6. If this parameter is set to 32K, "In-BSC Sub Timeslot No." and "OutBTS Sub Timeslot No." must be 0 or 4. If this parameter is set to 64K, "In-BSC Sub Timeslot No." and "OutBTS Sub Timeslot No." Read & must be 0. Write
BTS
None
Read & Write
None
None
None
None
None
None
Read & Write
None
None
Read & Write
BSC
None
Read & Write
BTS
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
Ethernet port
None
Read & Write
Not involved
Cell
This parameter is valid only when "TURNOFFENABLE" is set to ENABLE.
Read & Write
Cell
When "TURNOFFCELLSTPTI ME" < "TURNOFFCELLSTRTI ME", it indicates that the Dynamic Cell Power Off feature can be enabled Read & for more than a day. Write This parameter is valid only when "TURNOFFENABLE" is set to ENABLE or SLEEPING. The following condition must be met: "TURNOFFCELLSTPTI ME" < "TURNOFFCELLSTRTI Read & ME".. Write
Cell
Cell
None
Read & Write
Cell
This parameter is valid only when "TURNOFFENABLE" is set to ENABLE.
Read & Write
BTS
The value of this parameter must be smaller than "Temperature Alarm Lower Threshold".
Read & Write
BTS
The value of this parameter must be at least two degrees greater than "Temperature Alarm Lower Threshold".
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
Read & Write
Board
None
IP path
None
When "GRPT" in "ADD RSCGRP" is set to ATM or "BWMODE" is set to FULL_DUPLEX, this parameter is valid;The sum of "TxBw" and "RxBw" in "ADD RSCGRP" of upper class RSCGRP can not less than the "TxBw" and "AllBw" in "ADD RSCGRP"of lower class RSCGRP;The "TxBw" in "ADD RSCGRP" of upper class RSCGRP can not less than the "TxBw" in "ADD RSCGRP" of lower class RSCGRP, and the "RxBw" in "ADD RSCGRP" of upper class Transmissi RSCGRP can not less on than the "RxBw" in "ADD resource RSCGRP" of lower class Read & group RSCGRP. Write
Ethernet port
None
Read & Write
Not involved
Cell
None
None
None
BSC6900
None
Read & Write
Cell
None
Read & Write
Not involved
BSC
None
Read & Write
Cell
None
Read & Write
BTS
The value range of this parameter varies with BTS type. Different types of BTSs support different Read & types of cabinets. Write
Cell
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
MSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
MSC
None
Read & Write
None
None
Read & Write
None
None
Read & Write
NSE
None
Read & Write
Not involved
NSE
None
Read & Write
BSC6900
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
E1/T1 port None
Read & Write
Not involved
None
None
Read & Write
BTS
None
Read & Write
Cell
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULAFSREXQUALHIGH THRED" >= "ULAFSREXQUALLOW Read & THRED". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULAFSREXQUALHIGH THRED" >= "ULAFSREXQUALLOW Read & THRED". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULAHSREXQUALHIGH THRED" >= "ULAHSREXQUALLOW Read & THRED". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULAHSREXQUALHIGH THRED" >= "ULAHSREXQUALLOW Read & THRED". Write
Cell
This parameter is valid only when "BETTERCELLHOEN" is set to YES and "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "ULBQSTATTIME" >= Read & "ULBQLASTTIME". Write
Cell
This parameter is valid only when "BETTERCELLHOEN" is set to YES and "HOCTRLSWITCH" is set to HOALGORITHM2. The following condition must be met: "ULBQSTATTIME" >= Read & "ULBQLASTTIME". Write
BSC
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
Cell
This parameter is valid when "FRINGEHOEN" is set to YES or "RXQCKFALLHOEN" is Read & set to YES. Write
BSC
None
Read & Write
BSC
None
Read & Write
Cell
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULFSREXQUALHIGHT HRED" >= "ULFSREXQUALLOWT Read & HRED". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULFSREXQUALHIGHT HRED" >= "ULFSREXQUALLOWT Read & HRED". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULHSREXQUALHIGHT HRED" >= "ULHSREXQUALLOWT Read & HRED". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULHSREXQUALHIGHT HRED" >= "ULHSREXQUALLOWT Read & HRED". Write
Cell
The setting of this parameter must meet the following condition: "ULTHF1" + "ULHYSTF1" < "ULTHF2" + Read & "ULHYSTF2". Write
Cell
The setting of this parameter must meet the following condition: "ULTHF2" + "ULHYSTF2" < "ULTHF3" + Read & "ULHYSTF3". Write
Cell
None
Read & Write
Cell
The setting of this parameter must meet the following condition: "ULTHH1" + "ULHYSTH1" < "ULTHH2" + Read & "ULHYSTH2". Write
Cell
The setting of this parameter must meet the following condition: "ULTHH2" + "ULHYSTH2" < "ULTHH3" + Read & "ULHYSTH3". Write
Cell
None
Read & Write
Cell
The setting of this parameter must meet the following condition: "ULTHWB1" + "ULHYSTWB1" < "ULTHWB2" + Read & "ULHYSTWB2". Write
Cell
The setting of this parameter must meet the following condition: "ULTHWB1" + "ULHYSTWB1" < "ULTHWB2" + Read & "ULHYSTWB2". Write
BSC
None
Read & Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2 and "UPPCEN" in "SET GCELLBASICPARA" is Read & set to YES. Write
Cell
Cell
BSC
None
Read & Write
Cell
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "ULQLOWTHRED" >= Read & "ULQHIGHTHRED". Write
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "ULQLOWTHRED" >= Read & "ULQHIGHTHRED". Write
Cell
Cell
Cell
Cell
This parameter is valid only when "BQHOEN" in "SET GCELLHOBASIC" is set to YES and "NODLMRHOEN" in "SET GCELLHOEMG" is Read & set to YES. Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is Read & set to PWR3. Write This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULREXLEVHIGHTHRE D" >= "ULREXLEVLOWTHRE Read & D". Write
Cell
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR3. The following condition must be met: "ULREXLEVHIGHTHRE D" >= "ULREXLEVLOWTHRE Read & D". Write
Cell
Cell
Cell
Cell
Cell
Cell
Cell
This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "ULSSHIGHTHRED" >= Read & "ULSSLOWTHRED". Write This parameter is valid only when "PWRCTRLSW" in "SET GCELLPWRBASIC" is set to PWR2. The following condition must be met: "ULSSHIGHTHRED" >= Read & "ULSSLOWTHRED". Write
Cell
Cell
The setting of this parameter must meet the following conditions: "ULTHF1" < "ULTHF2"; "ULTHF1" + "ULHYSTF1" < "ULTHF2" + Read & "ULHYSTF2". Write
Cell
Cell
Cell
The setting of this parameter must meet the following conditions: "ULTHH1" < "ULTHH2"; "ULTHH1" + "ULHYSTH1" < "ULTHH2" + Read & "ULHYSTH2". Write
Cell
Cell
Cell
The setting of this parameter must meet the following conditions: "ULTHWB1" < "ULTHWB2"; "ULTHWB1" + "ULHYSTWB1" < "ULTHWB2" + Read & "ULHYSTWB2". Write
Cell
The setting of this parameter must meet the following conditions: "ULTHWB1" < "ULTHWB2"; "ULTHWB1" + "ULHYSTWB1" < "ULTHWB2" + Read & "ULHYSTWB2". Write
Cell
Read & Write
BSC
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
Generally, the value of this parameter is equal to "A Interface Tag" and Read & "Abis Interface Tag". Write
E1/T1 port None
Read & Write
Not involved
BSC
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Not involved
BTS
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
Read & Write
Cell
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BTS
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Transmissi on resource group
When "ISFIRSTCLASSE" in "ADD RSCGRP" is set to NO, this parameter is Read & valid. Write
Not involved
None
None
Read & Write
Not involved
Cell
The following condition must be met: "UPRXLEVSTATICTIME " >= Read & "UPRXLEVLASTTIME". Write
Cell
None
Read & Write
Cell
The following condition must be met: "UPRXLEVSTATICTIME " >= Read & "UPRXLEVLASTTIME". Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
None
Read & Write
BSC
None
Read & Write
BSC6900
None
Read & Write
None
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
BTS
None
Read & Write
Cell
Read & Write
Cell
Read & Write
Cell
Read & Write
Cell
Read & Write
Cell
Read & Write
Cell
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
Cell
"VGCSRSRVNUM"" <= "VGCSMAXNUM"
Read & Write
Cell
None
Read & Write
Cell
"VGCSRSRVNUM"" + PDTCH Number <= Cell Read & total service Channels Write
BSC
None
Read & Write
Cell
None
Read & Write
None
None
Read & Write
BSC
None
Read & Write
IP path
None
Read & Write
BSC6900
None
Read & Write
Not involved
SCTP link None
Read & Write
SCTP link None
Read & Write
BSC6900
None
Read & Write
Ethernet port
None
Read & Write
Not involved
BTS
This parameter is valid only when "VLANSWITCH" is set to Read & YES. Write
Ethernet port
None
Read & Write
Not involved
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BSC6900
None
Read & Write
BTS
This parameter is valid only when "VLANSWITCH" is set to Read & YES. Write
BTS
None
Read & Write
Cell
None
Read & Write
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
None
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
BTS
This parameter must be at least 0.2 smaller than "Serious VSW Alarm Read & TH". Write
BTS
This parameter must be at least 0.2 greater than "Standing Wave Radio Alarm Threshold".
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
Timer of MS Location Response from MS<Timer of MS Location Response from Read & SMLC Write
Cell
None
Read & Write
Cell
None
Read & Write
BSC
Timer of MS Location Response from MS<Timer of MS Location Response from Read & SMLC Write
BTS
None
Read & Write
None
None
Read & Write
BSC6900
None
Read & Write
Cell
None
Read & Write
BTS
None
Read & Write
None
None
Read & Write
Not involved
BSC
None
Read & Write
BSC6900
None
Read & Write
SCCP
None
Read & Write
Not involved
TRX
TRX
TRX
TRX
TRX
None
Read & Write
BSC6900
None
Read & Write
Not involved
BTS
None
None
None
Not involved
E1/T1 port None
Read & Write
BTS
None
Read & Write
ATERCON SL None
Read & Write
BTS
This parameter is valid only when "OMLBKUP" is set to YES.
Read & Write
BTS MSP protect group
This parameter must meet the following requirements: "FallBack Start Time" > "Ring I Wait Time Before Switch" + "Ring I Try Read & Rotating Duration Time". Write
None
Read & Write
Not involved
BSC6900
None
Read & Write
Interruption Scope Interruption Duration(Min)
Caution
Validation of Modification
Not involved
Not involved
None
The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
The value of this parameter must be greater than five times the maximum value of the following parameter: "Filter Length for SDCCH Level", "Filter Length for SDCCH Qual", "Filter Length for TCH Level", "Filter Length for TCH Qual", "Filter Length for TA", "TA filter length The parameter modification for SDCCH has no impact on the level". If equipment.
BTS
Less than 5 minutes
None
The BTS should be reset to validate the parameter modification.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter should be set to ON when the transmissi on delays of different 64 kbit/s timeslots are different over the Abis interface in TDM transmissi on mode. Different transmissi on delays usually occur in the DXX network mode or when the transmissi on paths of multiple E1 links are different The parameter modification under the has no impact on the same site. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
If this parameter is set too high, a normal voice may be considered abnormal. If this parameter is set too low, an abnormal voice may not be The parameter modification considered has no impact on the . equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
PPP link
Less than 5 minutes
None
The transport path should be re-established after the parameter modification.
Not involved
Not involved
This parameter is valid only when "BSSPAGI NGCOOR DINATION " in "SET GCELLPS The parameter modification BASE" is has no impact on the set to YES. equipment.
Not involved
Not involved
ACS is usually set to 0 because system information 7 and 8 messages are seldom used in common cells. ACS should be set to 1 if system information 7 and 8 messages are used in a cell and C2 is used for cell The parameter modification reselection has no impact on the . equipment.
Not involved
Not involved
The number of the chosen data rates must be from one to four. If this parameter involves only one full rate coding rate, the value of "AMR Starting Mode[F]" can be 0 only; all the adjustable thresholds and hysteresis of AMR coding rate make no sense. If this parameter involves two coding The parameter modification rates, the has no impact on the value of equipment.
Not involved
Not involved
The number of the chosen data rates must be from one to four. If this parameter involves only one half rate coding rate, the value of "AMR Starting Mode[H]" can be 0 only; all the adjustable thresholds and hysteresis of AMR coding rate make no sense. If this parameter involves two coding The parameter modification rates, the has no impact on the value of equipment.
Not involved
Not involved
The number of the chosen data rates must be from one to three. If this parameter involves only one coding rate, the value of "AMR Starting Mode[WB] " can be 0 only; all the adjustable thresholds and hysteresis of AMR coding rate make no sense. If this parameter involves two coding rates, the The parameter modification value of has no impact on the "AMR equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Cell
The services are disrupted until this parameter is set to Unlock. None
TRX
Services will be disrupted until the value of this parameter is changed to "Unlock".
None
Channel
Services will be disrupted until the value of this parameter is changed to "Unlock".
None
Not involved
Not involved
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
The radio link should be reestablished after the parameter modification.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
With a good antiinterferenc e capability, AMR codes can support a lower carrier-tointerferenc e ratio than non-AMR codes in a same FER. When the AMR is enabled, the voice quality improves. In this case, the value of this parameter can be a little larger than that of "Radio The parameter modification Link has no impact on the Timeout". equipment.
Not involved
Not involved
With a good antiinterferenc e capability, AMR codes can support a lower carrier-tointerferenc e ratio than non-AMR codes in a same FER. When the AMR is enabled, the voice quality improves. In this case, the value of this parameter can be a little larger than that of "SACCH The parameter modification Multihas no impact on the Frames". equipment. The parameter cannot be modified. Not involved The parameter modification has no impact on the None equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
With a good antiinterferenc e capability, AMR codes can support a lower carrier-tointerferenc e ratio than non-AMR codes in a same FER. When the AMR is enabled, the voice quality improves. In this case, the value of this parameter can be a little larger than that of "Radio The parameter modification Link has no impact on the Timeout". equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
With a good antiinterferenc e capability, AMR codes can support a lower carrier-tointerferenc e ratio than non-AMR codes in a same FER. When the AMR is enabled, the voice quality improves. In this case, the value of this parameter can be a little larger than that of "SACCH The parameter modification Multihas no impact on the Frames". equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
If this parameter is set to a greater value, TRX mutual aid may not be triggered promptly in the case of BCCH TRX failure after a cell has just been initialized. If this parameter is set to smaller value, mutual aid may be The parameter modification decided has no impact on the mistakenly. equipment. The parameter modification has no impact on the None equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The radio link should be reestablished after the parameter modification. The radio link should be reestablished after the parameter modification.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
The radio link should be reestablished after the parameter modification. The radio link should be reestablished after the parameter modification. The radio link should be reestablished after the parameter modification.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter is valid only when "SUPPOR TEDA" is set to The parameter modification SUPPORT has no impact on the . equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The parameter cannot be modified. Not involved The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
The parameter cannot be modified. Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The parameter cannot be modified. Not involved The adjacent node ID The parameter modification must be has no impact on the configured. equipment. The parameter modification has no impact on the None equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
The radio link should be reestablished after the parameter modification. The radio link should be reestablished after the parameter modification.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
Not involved
Not involved
Not involved
Not involved
This parameter is valid only when "AqmSwitc The parameter modification h" is set to has no impact on the OPEN. equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
This parameter is valid only when "AqmSwitc The parameter modification h" is set to has no impact on the OPEN. equipment. The parameter modification has no impact on the None equipment. This parameter is valid only when "AqmSwitc The parameter modification h" is set to has no impact on the OPEN. equipment.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Ethernet port
To modify this parameter, run "STP GATEWA Interrupt the service until YCHK" first the correct gateway is set and then or the port swapping or the "STR The parameter modification changing of IP route is GATEWA has no impact on the finished. YCHK". equipment. To modify this parameter, run "STP GATEWA YCHK" first and then "STR The parameter modification GATEWA has no impact on the YCHK". equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Before enabling this function, ensure that the parameter "Directed Retry" of the cell is set to YES. To obtain MRs on the SDCCH as many as possible, set the parameters "Waiting for MR on SDCCH Switch" and "IBCA The parameter modification Allowed" to has no impact on the YES. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
BSC6900
Less than 10 minutes
None
The BSC should be reset to validate the parameter modification.
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
The ATT must be set to the same value for different cells in a same location area. If not, some MSs after power-on may not act as a called party until they have waited for the period specified The parameter modification by has no impact on the "T3212". equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
PPP link
Interrupt the service until negotiate successfully again.
Negotiatio n can succeed only when the configurati on is consistent on the The parameter modification local and has no impact on the peer ends. equipment. Negotiatio n can succeed only when the configurati on is consistent on the The parameter modification local and has no impact on the peer ends. equipment. Negotiatio n can succeed only when the configurati on is consistent on the The transport path should local and be re-established after the peer ends. parameter modification. Negotiatio n can succeed only when the configurati on is consistent on the The parameter modification local and has no impact on the peer ends. equipment.
BSC6900
PPP link
Less than 5 minutes
BSC6900
BSC6900
Negotiatio n can succeed only when the configurati on is consistent on the The parameter modification local and has no impact on the peer ends. equipment. Negotiatio n can succeed only when the configurati on is consistent on the The transport path should local and be re-established after the peer ends. parameter modification. Negotiatio n can succeed only when the configurati on is consistent on the The parameter modification local and has no impact on the peer ends. equipment. Negotiatio n can succeed only when the configurati on is consistent on the The parameter modification local and has no impact on the peer ends. equipment.
PPP link
Less than 5 minutes
PPP link
BSC6900
PPP link
Less than 5 minutes
Negotiatio n can succeed only when the configurati on is consistent on the The transport path should local and be re-established after the peer ends. parameter modification. Negotiatio n can succeed only when the configurati on is consistent on the The parameter modification local and has no impact on the peer ends. equipment. Negotiatio n can succeed only when the configurati on is consistent on the The parameter modification local and has no impact on the peer ends. equipment. Negotiatio n can succeed only when the configurati on is consistent on the The transport path should local and be re-established after the peer ends. parameter modification.
PPP link
BSC6900
PPP link
Less than 5 minutes
BSC6900
The port can be set to the DOWN or UP state when this parameter is modified. If the negotiation modes on the local and peer end are not consistent, the service The parameter modification can be has no impact on the interrupted. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
If this parameter is set to YES, the BSC load is increased early in The parameter modification every has no impact on the morning. equipment.
Not involved
Not involved
The auto negotiation mode of FE port on the IPbased interface board should be consistent with that of the port on the peer end. Otherwise, this may cause the packet loss and link The parameter modification disconnecti has no impact on the on. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Optical port
If the mode is not consistent, will interrupt If the mode is not service The parameter modification consistent, will interrupt until it is has no impact on the service until it is consistent. consistent. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Each backplane board 8K clock has only one clock source. You are not allowed to turn on the same backplane board 8K clock switch for multiple The parameter modification interface has no impact on the boards. equipment.
Not involved
Not involved
Each backplane board 8K clock has only one clock source. You are not allowed to turn on the same backplane board 8K clock switch for multiple The parameter modification interface has no impact on the boards. equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
To modify this parameter, run "STP GATEWA YCHK" first and then "STR The parameter modification GATEWA has no impact on the YCHK". equipment. To modify this parameter, run "STP GATEWA YCHK" first and then "STR The parameter modification GATEWA has no impact on the YCHK". equipment.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
SCTP link
The services are interrupted until the SCTP link is working normally.
The parameter modificatio n should be negotiated with the peer end, and the BSC6900 should be reset after the modificatio n. It is recommen ded that this parameter should not be modified when the The BSC6900 should be system is reset to validate the running. parameter modification.
Not involved
Not involved
None
Not involved
Not involved
None
Cell
Less than 5 minutes
None
Cell
Less than 5 minutes
None
Not involved
Not involved
None
Cell
Less than 5 minutes
None
Not involved
Not involved
None
Cell
Less than 5 minutes
None
The cell should be activated after the parameter modification.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
To disable the alarm blink filter function, set this parameter to "0". To enable the alarm blink filter function, set this parameter to a value greater than 0 and turn on the alarm blink filter switch. See "SET ALMBLKS W" for setting the alarm blink The parameter modification filter has no impact on the switch. equipment.
Not involved
Not involved
To enable the alarm blink filter function, set "Alarm switch of blinking filter" and "Switch of stat blinking The parameter modification alarm" to has no impact on the "ENABLE". equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter cannot be modified. Not involved If the value of this parameter is too small, the SCUs of the TC subrack may remain congested. If the value is too large, the call failure rate may retain a higher value for a The parameter modification longer has no impact on the time. equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
When the M900/M18 00 BSC is upgraded to BSC6000, this parameter needs to be set to 69. If this parameter is not set to 69 in this case, the handover algorithm supported by this The parameter modification parameter has no impact on the is invalid. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter cannot be modified. Not involved The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
As defined in the protocol, the value of this parameter cannot be 0 in the following cases: The BSC needs to send system messages over the extended BCHs. CBCHs are configured. When the GSMR is enabled, The parameter modification NCHs are has no impact on the configured. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
If "MR.Prepr ocessing" is set to BTS_Prepr ocessing and this parameter is set to NO, the uplinkdownlink balance associated traffic statistics is improper. In addition, the handover algorithms that require power compensat ion are improper, such as PBGT handover, load handover, and The parameter modification concentric has no impact on the cell equipment. The parameter modification has no impact on the None equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
A paging block (four continuous CCCH timeslots) can bear two IMSI paging messages, four TMSI paging messages, or two AGCH immediate assignmen t message. If the signaling downlink is faulty when an MS is idle, the rule of downlink failure is based on the signaling downlink failure counter The parameter modification DSC. has no impact on the When an equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
This parameter is valid on a per cell basis and is valid only when "ACOOPE RATPAGI NGSWITC H" in the "SET BSCPSSO FTPARA" command The parameter modification is set to has no impact on the YES. equipment. The parameter modification has no impact on the None equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Cell
Less than 5 minutes
If certain link is occupied, conversion from E1 to T1 or from T1 to E1 The parameter modification cannot be has no impact on the performed. equipment. The parameter modification has no impact on the None equipment. The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter modification has no impact on the None equipment. The parameter cannot be modified. Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
If BTS Bar Code is incorrect, the OML between the BTS and the BSC cannot be establishe d. In this case, no alarm or status is displayed. When the BBU or BTS3900E module of a BTS is replaced, you need to set a new BTS bar code for the The parameter modification BTS on the has no impact on the BSC. equipment.
BTS
Less than 5 minutes
None
BTS
Less than 5 minutes
None
Not involved
Not involved
This parameter The parameter modification cannot has no impact on the contain #. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter can be set to BTS_Prepr ocessing only when the BTS supports the configured power The parameter modification control has no impact on the algorithm. equipment.
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
This parameter is required only by BTSs in IP The parameter modification transmissi has no impact on the on mode. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
For a doubletransceiver BTS or an NGBTS, the initial value is ON. For a BTS of any other type, the initial value is OFF and The parameter modification unconfigur has no impact on the able. equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not Involved
None
IP path
Less than 5 minutes
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
If the value of "Cell Bar Access" is YES and the value of "Cell Bar Qualify" is NO, new call access is prohibited but handover The parameter modification access is has no impact on the allowed. equipment.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
If the value of "Cell Bar Access" is YES and the value of "Cell Bar Qualify" is NO, new call access is prohibited but handover The parameter modification access is has no impact on the allowed. equipment. The parameter modification has no impact on the None equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter applies to The parameter modification only the has no impact on the EDGE trx. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The setting of this parameter needs negotiation with the opposite network element MSC. If the MSC supports processing assignmen t complete messages containing cell lists, set this parameter to YES; otherwise, set this The parameter modification parameter has no impact on the to NO. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
IP path
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The congestion start threshold must be greater than the congestion The parameter modification end has no impact on the threshold. equipment.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This function can be activated only when the "Switch for Abis Timeslot The parameter modification Detection" has no impact on the is "ON". equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The purpose of setting this parameter is to avoid call connection failure when an MS supporting the full rate channel only requests a half rate channel or an MS supporting the half rate channel only requests a full rate channel. In this way, the BSC can easily interconne ct with an MSC of The parameter modification another has no impact on the vendor. equipment.
Not involved
Not involved
None
Not involved
Not involved
When the network status is poor, the check count should not be too small. Otherwise, the path The parameter modification state is has no impact on the affected. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
The parameter cannot be modified. Not involved The parameter modification has no impact on the None equipment.
Not involved
Not involved
This parameter is supported only by the BTS3012A and The parameter modification BTS3006A has no impact on the . equipment. This parameter is supported only by the BTS3012A and The parameter modification BTS3006A has no impact on the . equipment. The checksum mode need the negotiation with the peer. According to the RFC4960, the value should be The parameter modification set to has no impact on the CRC32. equipment. The checksum mode need the negotiation with the peer. According to the RFC4960, the value should be The parameter modification set to has no impact on the CRC32. equipment.
Not involved
Not involved
SCTP link
SCTP link
SCTP link
None
Not involved
Not involved
Not involved
Not involved
The parameter cannot be modified. Not involved The parameter modification has no impact on the None equipment. This parameter is supported only by the following types of BTSs: BTS3012, BTS3006C , BTS3012A E, BTS3012 II, and The parameter modification BTS3002E has no impact on the . equipment. The parameter modification has no impact on the None equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter is supported only by the following types of BTSs: BTS3012, BTS3006C , BTS3012A E, BTS3012 II, and The parameter modification BTS3002E has no impact on the . equipment.
Not involved
Not involved
The setting of this parameter needs negotiation with the opposite network element MSC. If the MSC supports processing assignmen t complete messages containing the Chosen Channel, set this parameter to YES; otherwise, set this The parameter modification parameter has no impact on the to NO. equipment.
Not involved
Not involved
The setting of this parameter needs negotiation with the opposite network element MSC. If the MSC supports processing handover performed messages containing the Chosen Channel, set this parameter to YES; otherwise, set this The parameter modification parameter has no impact on the to NO. equipment.
Not involved
Not involved
The setting of this parameter needs negotiation with the opposite network element MSC. If the MSC supports processing HO REQ ACK messages containing the Chosen Channel, set this parameter to YES; otherwise, set this The parameter modification parameter has no impact on the to NO. equipment. The setting of this parameter needs negotiation with the opposite network element MSC. In this way, the MSC can process encryption complete The parameter modification messages has no impact on the correctly. equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The setting of this parameter needs negotiation with the opposite network element MSC. In this way, the MSC can process handover performed messages correctly. The setting of this parameter needs negotiation with the opposite network element MSC. In this way, the MSC can process assignmen t complete messages correctly. An assignmen t complete message contains the Chosen Encryption Algorithm only when the encryption algorithm used by an MS in two cells
Not involved
Not involved
The setting of this parameter needs negotiation with the opposite network element MSC. SENDING: The HO REQ ACK message contains the Chosen Encryption Algorithm. NOSENDI NG: The HO REQ ACK message does not contain the Chosen Encryption Algorithm. SYSTEMO PT: If the encryption The parameter modification algorithm has no impact on the used by an equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The smaller the value of this parameter is, the more sensitively the BSC controls the arrival rate of channel request messages, The parameter modification and vice has no impact on the versa. equipment.
Channel
Less than 1 minute
None
Not involved
Not involved
None
Not involved
Not involved
The CI can be input in hexadecim al format. The hexadecim al format is H'****, for The parameter modification example, has no impact on the H'1214. equipment.
Not involved
Not involved
1. The block of A interface must be configured. 2. If A over IP is configured, the configurati on does not support The parameter modification the has no impact on the operation. equipment.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The setting of this parameter needs negotiation with the opposite network element MSC. In this way, the MSC can process assignmen t complete The parameter modification messages has no impact on the correctly. equipment. The setting of this parameter needs negotiation with the opposite network element MSC. In this way, the MSC can process HO FAIL The parameter modification messages has no impact on the correctly. equipment.
Not involved
Not involved
Not involved
Not involved
The setting of this parameter needs negotiation with the opposite network element MSC. In this way, the MSC can process assignmen t failure messages correctly. NOSENDI NG: The assignmen t failure message does not contain the Circuit Pool List. SENDING PRO: If the cause value of assignmen The parameter modification t failure is has no impact on the "Circuit equipment. The setting of this parameter needs negotiation with the opposite network element MSC. In this way, the MSC can process HO FAIL The parameter modification messages has no impact on the correctly. equipment.
Not involved
Not involved
Not involved
Not involved
The setting of this parameter needs negotiation with the opposite network element MSC. If the MSC does not support process assignmen t complete messages containing the Circuit Pool, the value YES of this parameter The parameter modification makes no has no impact on the sense. equipment. The setting of this parameter needs negotiation with the opposite network element MSC. If the MSC does not support process assignmen t complete messages containing the Circuit Pool, the value YES of this parameter The parameter modification makes no has no impact on the sense. equipment. The parameter modification has no impact on the None equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
BTS
Less than 5 minutes
None
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
If you want to modify the value of "Clock board type" from "GCGa" to "GCUa", the board must not be The board should be reset configured to validate the parameter with GPS. modification.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
The value of this parameter cannot be changed. Not involved The parameter modification has no impact on the None equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
1. If you set "Upper count threshold of raised fault" and "Lower count threshold of raised fault" to "0", the accumulat ed number of blink times for the alarm is counted but not reported. 2. If "Upper count threshold of raised fault" is not "0", the value of "Lower count threshold of raised fault" The parameter modification cannot be has no impact on the "0" and equipment.
Not involved
Not involved
1. If you set "Upper count threshold of raised fault" and "Lower count threshold of raised fault" to "0", the accumulat ed number of blink times for the alarm is counted but not reported. 2. If "Lower count threshold of raised fault" is not 0, the value of "Upper count threshold of raised fault" The parameter modification cannot be has no impact on the 0 and you equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
This parameter can be added and modified. It The parameter modification cannot be has no impact on the deleted. equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
This parameter cannot be set to YES for the TRX that carries the The parameter modification main has no impact on the BCCH. equipment. The parameter modification has no impact on the None equipment.
Not involved
Not involved
This parameter is not supported by the BTS3001C and The parameter modification BTS3001C has no impact on the P. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The settings of RXLEVACCESSMIN and CRO should guarantee that cells with same priority have the same cell The parameter modification reselect has no impact on the offset. equipment.
Not involved
Not involved
None
Not involved
Not involved
The parameter is related to practical The parameter modification networking has no impact on the . equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The modificatio n of the parameter affects the adjacent node that is configured with the factor table. After the successful modificatio n, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modificatio n of the The parameter modification existing has no impact on the subscriber equipment.
Not involved
Not involved
The modificatio n of the parameter affects the adjacent node configured with the TRMMAP. After the successful modificatio n, it is valid in the case of the new access of a subscriber and the bandwidth modificatio n of an The parameter modification existing has no impact on the subscriber. equipment. The modificatio n of the parameter affects the adjacent node configured with the TRMMAP. After the successful modificatio n, it is valid in the case of the new access of a subscriber and the bandwidth modificatio n of an The parameter modification existing has no impact on the subscriber. equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The larger the value of this parameter, the higher the proportion of discarded messages during congestion . Therefore, the priority value of a more important service must be less than that of a less The parameter modification important has no impact on the service. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The larger the value of this parameter, the higher the proportion of discarded messages during congestion . Therefore, the priority value of a more important service must be less than that of a less The parameter modification important has no impact on the service. equipment.
Not involved
Not involved
None
BSC6900
Less than 5 minutes
None
BSC6900
Less than 5 minutes
None
BSC6900
Less than 5 minutes
None
BSC6900
Less than 5 minutes
None
BSC6900
Less than 5 minutes
None
BSC6900
Less than 5 minutes
None
BSC6900
Less than 5 minutes
None
BSC6900
Less than 5 minutes
None
BSC6900
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The parameter cannot be modified. Not involved If this parameter of an activated BTS is modified, the entire The BTS should be reset to BTS chain validate the parameter is reset. modification. If this parameter of an activated BTS is modified, the entire The BTS should be reset to BTS chain validate the parameter is reset. modification.
BTS
Less than 5 minutes
BTS
Less than 5 minutes
Not involved
Not involved
None
Not involved
Not involved
The setting of this parameter needs negotiation with the opposite network element MSC. In this way, the MSC can process HO RQD The parameter modification messages has no impact on the correctly. equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not Involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Cell
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
When running this command, the source IP address and the destination IP address cannot be the local IP address and the peer IP address configured The parameter modification for the has no impact on the IPPATH. equipment. The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BTS
Less than 5 minutes
None
BTS
Less than 5 minutes
This parameter can be modified only when the BTS is The BTS should be reset to deactivate validate the parameter d. modification.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Cell
Less than 1 minute
None
Not involved
Not involved
None.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
This parameter takes effect only when the SDCCH exists on the TRXs on different The parameter modification frequency has no impact on the bands. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The setting of this parameter needs negotiation with the MSC of the opposite network element. If the MSC supports processing assignmen t failure messages containing the cause value of direct retry, set this parameter to YES; otherwise, set this The parameter modification parameter has no impact on the to NO. equipment.
Not involved
Not involved
None
Not involved
Not involved
If the value of this parameter is YES, the intra-BSC handovers (including intra-cell handovers) in which the cell is the source or destination cell are processed as asynchron The parameter modification ous has no impact on the handovers. equipment.
Not involved
Not involved
If this parameter is set to 15, this The parameter modification protection has no impact on the is disabled. equipment.
Not involved
Not involved
None
Not involved
Not involved
This parameter applies to only the doubletransceiver BTS and the correspond ing The parameter modification distributed has no impact on the BTS. equipment.
Not involved
Not involved
This parameter applies to only the doubletransceiver BTS and the correspond ing The parameter modification distributed has no impact on the BTS. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
NSVC
Less than 5 minutes
This parameter is related to the actual physical connection of the BC. This parameter is modified only when the NSVC The parameter modification service is has no impact on the faulty. equipment.
Not involved
Not involved
If this parameter is set to a small value, the detection of service type is sensitive and may lead to ping-pong handover between The parameter modification different has no impact on the services. equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Generally, the value of this parameter does not need adjustment . It is the lower limit for adjusting the value of DLLongTer The parameter modification mFERTarg has no impact on the et. equipment.
Not involved
Not involved
Not involved
Not involved
This parameter is used for the adaptive adjustment function of AMR downlink threshold. When the voice is in poor performan ce not being affected by the channel quality: If the low rate mode is more used in the adaptation, you can increase the value of this parameter; if the high rate mode is more used in the Generally, the value of this parameter does not need adjustment . It is the upper limit for adjusting the value of DLLongTer mFERTarg et.
Not involved
Not involved
Generally, the value of this parameter is fixed to 2, with no need of adjustment . The value of this parameter decides only the adjustment value or the adjusting frequency of the threshold. That is, the greater the value of this parameter is, the more frequently the threshold is adjusted. The parameter modification The setting has no impact on the of this equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The setting of this parameter affects the triggering of a handover for poor quality in an AMR full rate call. The smaller the value of this parameter is, the easier a downlink handover due to a poor The parameter modification quality has no impact on the occurs. equipment.
Not involved
Not involved
The setting of this parameter affects the triggering of a handover for poor quality in an AMR half rate call. The smaller the value of this parameter is, the easier a downlink handover due to a poor The parameter modification quality has no impact on the occurs. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The downlink power control (at the BTS side) can support up to 15 levels, in each of which the power of 2 dB is dynamicall The parameter modification y has no impact on the controlled. equipment.
Not involved
Not involved
During upgrade, pay more attention to the setting of this parameter. Be sure to check it. If an area is allowed for receiving short messages, set this parameter to NO. If the value of this parameter is YES, the MS in either idle or connected mode cannot occupy radio channel resources to send The parameter modification short has no impact on the messages. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
If you do not use a dualantenna to receive signals, set this The parameter modification parameter has no impact on the to 0. equipment.
BSC6900
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
The priority of the signaling link should The parameter modification be the has no impact on the highest. equipment.
Not involved
Not involved
The parameter cannot be modified. Not involved The existing networking can be affected when the relation between the VLAN and the The parameter modification DSCP are has no impact on the reset. equipment.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
The parameter modification does not impact the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Cell
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BTS
Less than 5 minutes
BTS
Less than 5 minutes
None
BTS
Less than 5 minutes
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
It is used for interworkin g with products of other The parameter modification manufactur has no impact on the ers. equipment.
Not involved
Not involved
None
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
The address must exist and respond to The parameter modification the PING has no impact on the request. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
It is recommen ded that this parameter be set to Yes on a The parameter modification multiband has no impact on the cell. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None 1. If you set the start date or end date of daylight saving time (DST) to a day of the week after a specific date, the specific date must be six days or more days prior to the last day of the month. For example, the last day of October is the 31st day. Then, the specific date cannot be later than the 25th (31 6) The parameter modification day. If you has no impact on the set the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Cell
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
For the modificatio n of the parameter, See the The parameter modification ITU-T has no impact on the Q704. equipment.
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
The value of this parameter must be the same at both the BSS side and the NSS side. Whether the BSC6900 is encrypted and the chosen encryption algorithm type must be described in the MAP function process of the MSC. When setting the encryption algorithm type of the BSC6900, you must The parameter modification refer to the has no impact on the data equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
1. The block of A interface must be configured. 2. If A over IP is configured, the configurati on does not support the operation. 3. The difference between the end CIC and the start CIC is The parameter modification smaller has no impact on the than 256. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BTS
Less than 5 minutes
None
Not involved
Not involved
Not involved
Not involved
None 1. The block of Ater interface must be configured. 2. If the BSC is configured to the integrated BMTC or A over IP is configured, the configurati on does not support the operation. 3. If the block operation is applicable to only the ATERTS of the BM subrack. You are not allowed to perform The parameter modification the block has no impact on the operation equipment.
Not involved
Not involved
BTS
Less than 5 minutes
1. The block of A interface must be configured. 2. If the BSC is configured to the integrated BMTC or A over IP is configured, the configurati on does not support the operation. 3. If the block operation is applicable to only the AE1T1 of the BM subrack. You are not allowed to perform the block The parameter modification operation has no impact on the from the equipment. The BTS should be reset to validate the parameter None modification.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Cell
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Cell
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
If the value of this parameter is too small, extension measurem ent reports are sent frequently. If the value is too large, feedback information may not be sent promptly in fewer extension The parameter modification measurem has no impact on the ent reports. equipment.
Not involved
Not involved
None
Cell
Less than 1 minute
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The board should be reset to validate the parameter modification.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
BSC6900
Negotiatio n can succeed only when the configurati on is consistent on the The parameter modification local and has no impact on the peer ends. equipment. Negotiatio n can succeed only when the configurati on is consistent on the The parameter modification local and has no impact on the peer ends. equipment.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
BTS
Less than 5 minutes
Not involved
Not involved
PPP link
The parameter modification has no impact on the None Negotiatio equipment. n fails if this parameter The parameter modification is has no impact on the modified. Negotiatio equipment. n fails if this parameter The parameter modification is has no impact on the modified. equipment.
BSC6900
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The value ranges of frequency numbers vary with correspond The parameter modification ing band has no impact on the reporting. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Cell
Less than 5 minutes
You must deactivate the cell before modifying this parameter and activate the cell after modifying The cell should be this activated after the parameter. parameter modification.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
If this parameter is set to a small value, error is likely to occur during the detection The parameter modification of the burst has no impact on the packets. equipment.
Not involved
Not involved
None
BSC6900
Negotiatio n can succeed only when the configurati on is consistent on the The parameter modification local and has no impact on the peer ends. equipment. Negotiatio n can succeed only when the configurati on is consistent on the The parameter modification local and has no impact on the peer ends. equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
The default value of "MS_TXP WR_MAX_ CCH" in the GSM900 and GSM850 cells is 5; the default value of "MS_TXP WR_MAX_ CCH" in the DCS1800 and The parameter modification PCS1900 has no impact on the cells is 0. equipment. The parameter modification has no impact on the None equipment. In "EXP ELABEL", the "FN" parameter cannot be a space or any of the following characters: '@', '#', '!', '%', '^', '&', The parameter modification '*', '[', ']', '\'', has no impact on the '\\'. equipment.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
When this parameter is set to YES, during the channel activation of the BSC6900, if the allocated channel speech version is full rate speech version 1 whereas the MS supports full rate speech version 2, the BSC6900 changes the speech version to full rate speech version 2 and sends The parameter modification it to the has no impact on the BTS. For equipment.
Not involved
Not involved
None
BTS
Less than 5 minutes
None
BTS
Less than 5 minutes
Not involved
Not involved
The adjacent node ID The parameter modification must be has no impact on the configured. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
No_HC: disable the header compressi on function; RTP/UDP/I P_HC: enable the RTP/UDP/I The parameter modification P/PPP has no impact on the function equipment.
Not involved
Not involved
None
Not involved
Not involved
For a BTS of the BTS3X series, the value of this The parameter modification parameter has no impact on the is invalid. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Cell
Less than 1 minute
The value range of this parameter depends on the frequency range of The parameter modification the cell has no impact on the band. equipment.
Cell
Less than 5 minutes
If the BCCH frequency of a cell is changed, the BSC6900 forcibly hands over the calls in this cell to another cell and The parameter modification then resets has no impact on the this cell. equipment. If the BCCH frequency of a cell is changed, the BSC6900 forcibly hands over the calls in this cell to another cell and The parameter modification then resets has no impact on the this cell. equipment. If the BCCH frequency of a cell is changed, the BSC6900 forcibly hands over the calls in this cell to another cell and The parameter modification then resets has no impact on the this cell. equipment.
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
Cell
Less than 5 minutes
If the BCCH frequency of a cell is changed, the BSC6900 forcibly hands over the calls in this cell to another cell and The parameter modification then resets has no impact on the this cell. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter is valid in only the cells in the coverage The parameter modification area of the has no impact on the BTS3X. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BTS
Less than 5 minutes
This parameter can be modified only when the BTS is The BTS should be reset to deactivate validate the parameter d. modification. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
BTS
Less than 5 minutes
Not involved
Not involved
None
Not involved
Not involved
The FACTORT ABLE must The parameter modification be has no impact on the configured. equipment. The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter determines whether to load data from the OMU or the FLASH when the BSC6900 or the board is restarted. The The parameter modification equipment has no impact on the is affected. equipment.
Not involved
Not involved
The value of this parameter is valid only for the BTSs of the doubletransceiver series and the The parameter modification distributed has no impact on the BTSs. equipment.
Cell
PS service of the cell will be interrupt until this parameter is set to "SupportAsInnPcu" or "SupportAsExtPcu.
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
BTS
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter is supported only by the The parameter modification BTS3002C has no impact on the . equipment.
Not involved
Not involved
This parameter is supported only by the The parameter modification BTS3002C has no impact on the . equipment. If the TRXs in a cell under this BSC6900 are at a frequency on DCS1800, this parameter cannot be set to PCS1900, The parameter modification and vice has no impact on the versa. equipment.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
When this parameter is set to No, Highest Priority The parameter modification cannot be has no impact on the configured. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The value of this parameter cannot be changed. Not involved The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Cell
Less than 1 minute
The value of this parameter must be the same as the attribute value of the TRX frequency hopping of this frequency The cell should be hopping activated after the group. parameter modification.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Cell
Less than 1 minute
None
Not involved
Not involved
Cell
Less than 1 minute
After this parameter is modified, the services in the cell are handed over forcedly. The cell is reset after all the handover succeeds The cell should be or after ten activated after the seconds. parameter modification.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
Before the modificatio n, the cell mapping table bound to the The services are signaling The parameter modification interrupted until the point must has no impact on the signaling point is available. be deleted. equipment.
BTS
Less than 5 minutes
None
Not involved
Not involved
Set this parameter properly to ensure that hierarchica l handover and loadbased handover can function properly. During hierarchica l handover and loadbased handover, the downlink received level of the target cell must be greater The parameter modification than this has no impact on the threshold. equipment.
Not involved
Not involved
None
Cell
Less than 1 minute
None
Cell
Less than 1 minute
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Cell
Less than 1 minute
HSNs are optional for the cells with frequency hopping enabled. The cells in the same frequency group must use different HSNs. The HSNs of all the channels in a cell The cell should be must be activated after the the same. parameter modification.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter is supported only by the BTS3012A and The parameter modification BTS3006A has no impact on the . equipment.
Not involved
Not involved
Not involved
Not involved
For details of the timer, see ITU-T Q.714. The modificatio n is not The parameter modification recommen has no impact on the ded. equipment. The parameter modification has no impact on the None equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
For details of the timer, see ITU-T Q.714. The modificatio n is not The parameter modification recommen has no impact on the ded. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The parameter IBCA Allowed of the serving cell and the neighbor cell should be set to Yes before the configurati The parameter modification on of this has no impact on the parameter. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
When the network status is poor, the packet length should not be too large. Otherwise, the path The parameter modification state is has no impact on the affected. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Cell
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BTS
Less than 5 minutes
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter must be equal to or less than "OUTHOP WROVER LOADTHR ESHOLD" to protect the other timeslots/c ells from overload and The parameter modification underpowe has no impact on the r. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The parameter cannot be modified. Not involved This parameter can be modified only when the BTS is The BTS should be reset to deactivate validate the parameter d. modification. The BTS should be reset to validate the parameter modification.
BTS
Less than 5 minutes
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The parameter cannot be modified. Not involved This parameter can be modified only when the BTS is The BTS should be reset to deactivate validate the parameter d. modification. The parameter cannot be modified. Not involved This parameter can be modified only when the BTS is The BTS should be reset to deactivate validate the parameter d. modification.
BTS
Less than 5 minutes
Not involved
Not involved
BTS
Less than 5 minutes
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
1. Interferenc e band 0 is not counted in the traffic statistics. 2. In the following BTSs, the value range of this parameter is 115 to 85: BTS2X of all the versions, BTS3X 03.1130 of the earlier versions, 3001C07.0 301 of the earlier versions, and 3002C02.0 820 of the earlier versions. If this The parameter modification parameter has no impact on the is set to a equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not Involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Ethernet port
The loopback keeps interrupting the services until the loopback is cancelled.
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The BTS should be reset to validate the parameter modification.
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
NSE
Services are interrupted unless the NSVL configuration is the same as the SGSN configuration at the BSC. None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
Negotiatio n can succeed only when the configurati on is consistent on the The parameter modification local and has no impact on the peer ends. equipment. No_HC: disable the header compressi on function; RTP/UDP/I P_HC: enable the RTP/UDP/I The parameter modification P/PPP has no impact on the function equipment.
Not involved
Not involved
Not involved
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter modification has no impact on the None equipment. This parameter depends on the type of the actual physical IP transport The BTS should be reset to cable of validate the parameter the BTS. modification. This parameter must be set according to the medium type of the actual IP transmissi on cable The BTS should be reset to used by validate the parameter the BTS. modification.
Not involved
Not involved
Not involved
Not involved
BTS
Less than 5 minutes
BTS
Less than 5 minutes
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Cell
Less than 1 minute
Each cell can be configured with only one TRX that carries The cell should be the main activated after the BCCH. parameter modification.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The parameter cannot be modified. Not involved The parameter IPPATH must be configured The parameter modification in has no impact on the advance. equipment.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
The setting of this parameter must be consistent If the mode is not with that The parameter modification consistent, will interrupt on the has no impact on the service until it is consistent. peer. equipment.
BSC6900
The setting of this parameter must be consistent If the mode is not with that The parameter modification consistent, will interrupt on the has no impact on the service until it is consistent. peer. equipment. The setting of this parameter must be consistent If the mode is not with that The parameter modification consistent, will interrupt on the has no impact on the service until it is consistent. peer. equipment.
BSC6900
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
The setting of this parameter must be consistent If the mode is not with that The parameter modification consistent, will interrupt on the has no impact on the service until it is consistent. peer. equipment.
BSC6900
The setting of this parameter must be consistent If the mode is not with that The parameter modification consistent, will interrupt on the has no impact on the service until it is consistent. peer. equipment. The setting of this parameter must be consistent If the mode is not with that The parameter modification consistent, will interrupt on the has no impact on the service until it is consistent. peer. equipment. It is used for interworkin g with products of other The parameter modification manufactur has no impact on the ers. equipment. The parameter modification has no impact on the equipment.
BSC6900
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
1. This command is applicable to the boards AOUa, POUa, AOUc, POUc, and OIUa. 2. It is used for interworkin g with products of other The parameter modification manufactur has no impact on the ers. equipment. The parameter modification has no impact on the None equipment. 1. This command is applicable to the boards AOUa and POUa. 2. It is used for interworkin g with products of other The parameter modification manufactur has no impact on the ers. equipment.
Not involved
Not involved
Optical port
The setting of this parameter must be negotiated with that If the mode is not on the The parameter modification consistent, will interrupt interconne has no impact on the service until it is consistent. cted side. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
The setting of this parameter must be negotiated with that on the The parameter modification interconne has no impact on the cted side. equipment.
Not involved
Not involved
None
BSC6900
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
This parameter must be less than The parameter modification "UHUMTH has no impact on the D". equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
The setting of this parameter must be consistent with that The parameter modification on the has no impact on the peer. equipment. The parameter cannot be modified. Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
According to the MTP3 load sharing principle, the link selection mask must be set properly. If the value is not set properly, the load sharing between The parameter modification MTP3 links has no impact on the may fail. equipment.
Not involved
Not involved
The mask is calculated according to the link set to a The parameter modification destination has no impact on the entity. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter is valid only when "NC2Load Resel" is set to The parameter modification SUPPORT has no impact on the . equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The reciprocal of the parameter value is the ratio of the MSs to perform a The parameter modification load has no impact on the handover. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The function of cell load reselection is valid only when "NC2Load Resel" in "SET BSCPSSO FTPARA" is set to Support and "LOADRE SELALLO The parameter modification W"is set to has no impact on the Permit. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The parameter cannot be modified. Not involved The local IP address and peer IP must be configured in the same network segment. The peer IP address cannot be the same with the local IP address of The parameter modification the has no impact on the BSC6900. equipment.
Not involved
Not involved
BTS
Less than 5 minutes
None
BTS
Less than 5 minutes
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
SCTP link
The both end address of the SCTP is the parameter for the interconne ction. The value can be modified after the negotiation with the The parameter modification peer has no impact on the system. equipment.
SCTP link
The both end address of the SCTP is the parameter for the interconne ction. The value can be modified after the negotiation with the The parameter modification peer has no impact on the system. equipment.
Not involved
Not involved
None
SCTP link
The parameter can be modified when "MODE" in the command "ADD SCTPLNK" The parameter modification is set to has no impact on the Client. equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
SCTP link
It is valid when "LOGPOR TFLAG[/P ARA in the command "ADD The parameter modification SCTPLNK" has no impact on the is ON. equipment.
SCTP link
It is valid when "LOGPOR TFLAG[/P ARA in the command "ADD The parameter modification SCTPLNK" has no impact on the is ON. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter modification has no impact on the None equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
E1/T1 port
1. When the peer end unconditio nally changes the bits in the check message, the services are disrupted if the switch is set to ON. 2. When the switch is set to OFF, the alarm "Inconsiste nt Configurati ons at the Two Ends When the peer end of the Link unconditionally changes the over the bits in the check message, Ater the services will not resume Interface" The parameter modification unless the switch is set to will not be has no impact on the OFF. reported. equipment.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
E1/T1 port
The loopback keeps interrupting the services until it is cancelled.
If this parameter is set to REMOTE_ LOOP and LOCAL_L OOP, the service on this link is affected until the loopback is cancelled. When the upper layer bearer is IMAGRP, IMAGRP is reset after the loopback is canceled. Otherwise, the state of the IMAGRP is abnormal and upper layer service cannot be The parameter modification establishe has no impact on the d. equipment.
BSC6900
The loopback keeps interrupting the services until it is cancelled.
Not involved
Not involved
When the loopback type is changed to REMOTE_ LOOP or LOCAL_L OOP, the service is affected. The service becomes normal when the loopback test is canceled. When the loopback type is set to LOCAL_L OOP, you cannot directly change it to REMOTE_ LOOP. You must change it The parameter modification to has no impact on the NO_LOOP equipment. The parameter modification has no impact on the None equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
For the BTS3002C , if each cell is configured with two TRXs (O2 or S2) and the value of this parameter is YES, the radio frequency (RF) connection supports the configurati on of the main diversity antennas. Only the BTS3002C The parameter modification has this has no impact on the parameter. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
IP path
Less than 5 minutes
None
Not involved
Not involved
Not involved
Not involved
IP path
Less than 5 minutes
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter must be less than The parameter modification "UTEMTH has no impact on the D". equipment.
Not involved
Not involved
Generally, the value of this parameter does not need adjustment . It is the lower limit for adjusting the value of LongTerm The parameter modification FERTarget has no impact on the . equipment.
Not involved
Not involved
Not involved
Not involved
The value of this parameter decides whether the threshold is adjusted upwards or downwards . When the voice is in poor performan ce (excluding the cause of poor channel quality: If the low rate mode is more used in the adaptation, you can increase the value of this parameter; if the high rate mode is more used in the Generally, the value of this parameter does not need adjustment . It is the upper limit for adjusting the value of LongTerm FERTarget
Not involved
Not involved
Generally, the value of this parameter is fixed to 2, with no need of adjustment . The value of this parameter decides only the adjustment value or the adjusting frequency of the threshold. That is, the greater the value of this parameter is, the more frequently the threshold is adjusted. The parameter modification The setting has no impact on the of this equipment.
Cell
The adjustment of the parameter setting changes the service distribution on the DSPs. The DSPs without LVDS links Services are disrupted until do not The parameter modification the cells are re-distributed carry has no impact on the successfully. services. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
SCTP link
Not involved
Not involved
The parameter modificatio n should be negotiated with the peer end, and the BSC6900 should be reset after the modificatio n. It is recommen ded that this parameter should not be modified when the The BSC6900 should be system is reset to validate the running. parameter modification. The parameter modification has no impact on the None equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
If there are fewer frequencie s in a frequency hopping group, the mode of Frequency List can decrease the length of an assignmen t or handover command to facilitate The parameter modification the access has no impact on the of an MS. equipment.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
PPP link
Less than 5 minutes
None
PPP link
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The modificatio n of the parameter affects the sensitivity of the SCTP link detection. The larger the value is, the longer the link The parameter modification detection has no impact on the time is. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
1. In the earlier versions of BSC6000V 900R008C 01B060SP 06 and BSC6000V 900R0086 C01B060S P06, a maximum of 50 BTSs can be downloade d simultaneo usly on one BSC through the M2000 client. In BSC6000V 900R008C 01B060SP 06 and BSC6000V 900R0086 C01B060S P06 and its later versions, a The parameter modification maximum has no impact on the of 100 equipment.
PPP link
None
Not involved
Not involved
The value of this parameter cannot be smaller than the maximum PPPMUX sub-frame length. The number sub-frame must be larger than 2 to enable The parameter modification the has no impact on the PPPMUX. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The modificatio n of the parameter affects the sensitivity of the SCTP link detection. The larger the value is, the longer the link The parameter modification detection has no impact on the time is. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
You can increase this value when the handovers are slow or the handover success ratio is low due to bad clock or transmissi on quality. For the handovers of an MS to succeed, the following condition must be met: "Physical information MAX Retrans" x "Radio link invalid count" > Interval The parameter modification between has no impact on the the EST equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
PPP link
None
Not involved
Not involved
If the PPP frame length is larger than this value, PPPMUX multiplexin g cannot be performed. The value of this parameter cannot be larger than the maximum multiplexin g frame length wMuxMfl and the number sub-frame must be larger than 2 as the enabling condition of PPPMUX (the The parameter modification relation has no impact on the between equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
If this parameter is set to a smaller value, the handover success rate may The parameter modification be has no impact on the affected. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Before performing singlepoint positioning , you need to remove GPS configurati The parameter modification on history has no impact on the records. equipment.
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
PPP link
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter is valid only when the MCPA The parameter modification algorithm has no impact on the is enabled. equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The Enhanced Measurem ent Report supports the measurem ent of 3G neighborin g cells to implement the interoperab ility between the 2G system and 3G system, and thus ensures The parameter modification the service has no impact on the continuity. equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
PPP link
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
To modify this parameter, run "STP GATEWA YCHK" first and then "STR The parameter modification GATEWA has no impact on the YCHK". equipment.
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
SCTP link
Not involved
Not involved
The local end of the SCTP link is the server and the application type is NBAP, the working mode should not be modified as the client. For the SCTP link of the M3UA application , the working mode can be modified only when the upper layer The parameter modification application has no impact on the is deleted. equipment. The parameter modification has no impact on the None equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
PPP link
Less than 5 minutes
None
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Because the measurem ent reports may not always be correctly decoded when the quality of a serving cell is poor, handovers may fail when the number of the lost measurem ent reports exceeds the value set by this parameter. You can set a relatively larger value for this parameter, thus enabling The parameter modification emergency has no impact on the handovers. equipment.
Not involved
Not involved
None
Not involved
Not involved
When this parameter is set to Noreport, the BTSs do not submit measurem ent reports to the BSC, which disables handovers and power control, and greatly impacts on The parameter modification the speech has no impact on the quality. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
PPP link
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
If the MSC pool function is enabled, and the value of this parameter is not NORMAL, the DPC is not selected The parameter modification for call has no impact on the access. equipment.
Not involved
Not involved
If the GSM BSC is connected to the GSM MSC, it is recommen ded that you set this parameter to R98_or_be low. If the GSM BSC is connected to the UMTS MSC, it is recommen ded that you set this parameter to The parameter modification R99_or_ab has no impact on the ove. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
The interconne ction may be affected if this If the mode is not parameter The parameter modification consistent, will interrupt is has no impact on the service until it is consistent. modified. equipment.
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None.
Not involved
Not involved
None.
Not involved
Not involved
None.
Not involved
Not involved
If the value of this parameter is increased, the cell congestion rate increases. If the value of this parameter is decreased, one-way audio may persist The parameter modification after the has no impact on the handover. equipment.
Not involved
Not involved
If this parameter is set to YES, the call drop The parameter modification rate may has no impact on the increase. equipment. Negotiatio n can succeed only when the configurati on is consistent on the The parameter modification local and has no impact on the peer ends. equipment. Negotiatio n can succeed only when the configurati on is consistent on the The parameter modification local and has no impact on the peer ends. equipment. The adjacent node ID The parameter modification must be has no impact on the configured. equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter is valid only when "NC2SPT" in "SET GCELLGP RS" is set to YES and "NCO" in "SET GCELLPS The parameter modification BASE" is has no impact on the set to NC2. equipment.
Cell
Less than 5 minutes
None
Cell
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter is supported only by the following dualdensity BTSs: BTS3012, BTS3006C , BTS3012A E, BTS3012 II, and The parameter modification BTS3002E has no impact on the . equipment.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Ethernet port
If the value is too big, will interrupt service until it is set to the normal value.
If this parameter is set to a larger value, the bandwidth of the The parameter modification service is has no impact on the smaller. equipment.
BSC6900
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
The transmissi on priority of the service is affected if the queue DSCP value of The parameter modification the port is has no impact on the modified. equipment. The transmissi on priority of the service is affected if the queue DSCP value of The parameter modification the port is has no impact on the modified. equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment. The parameter cannot be modified. Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
If the parameter value is set relatively small, the sensitivity for detecting the OML when it is broken is improved. When the parameter value is set too small and if the link is intermittent ly disconnect ed, misjudgem ents may occur to the testing results. If the parameter value is set relatively large, the The parameter modification sensitivity has no impact on the for equipment. The parameter cannot be modified. Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Cell
Less than 5 minutes
Before modifying this parameter, you must deactivate the cells The cell should be bound to activated after the the OPC. parameter modification.
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Primary operator The parameter modification index must has no impact on the be 0. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
1. The block of Ater interface must be configured. 2. If the BSC is configured to the integrated BMTC or A over IP is configured, the configurati on does not support the operation. 3. If the block operation is applicable to only the ATERTS of the BM subrack. You are not allowed to perform The parameter modification the block has no impact on the operation equipment.
Not involved
Not involved
1. The block of A interface must be configured. 2. If the BSC is configured to the integrated BMTC or A over IP is configured, the configurati on does not support the operation. 3. If the block operation is applicable to only the AE1T1 of the BM subrack. You are not allowed to perform the block The parameter modification operation has no impact on the from the equipment.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
The setting of this parameter must be consistent with that The parameter modification on the has no impact on the peer. equipment.
Not involved
Not involved
None
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
If this parameter is set to a greater value, too many channel resources are occupied and the congestion occurs. If this parameter is set to a smaller value, the handover success The parameter modification rate may has no impact on the fall. equipment.
Not involved
Not involved
If this parameter is set to a greater value, too many channel resources are occupied and the congestion occurs. If this parameter is set to a smaller value, the handover success The parameter modification rate may has no impact on the fall. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
BTS
Less than 5 minutes
None
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
If this parameter is set to a greater value, the CPU may be overloaded . If this parameter is set to a smaller value, the call loss rate is high. If this parameter is set to a greater value, the CPU may be overloaded . If this parameter is set to a smaller value, the call loss rate is high. If this parameter is set to a greater value, the CPU may be overloaded . If this parameter is set to a smaller value, the call loss rate is high.
Not involved
Not involved
If this parameter is set to a greater value, the CPU may be overloaded . If this parameter is set to a smaller value, the call loss The parameter modification rate is has no impact on the high. equipment.
Not involved
Not involved
None
Not involved
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
BTS
None
BTS
Less than 5 minutes
None
BTS
Less than 5 minutes
None
BTS
Less than 5 minutes
None
Not involved
Not involved
The parameter cannot be modified. Not involved The local IP address and peer IP must be configured in the same network segment. The peer IP address cannot be the same with the local IP address of The parameter modification the has no impact on the BSC6900. equipment. The parameter cannot be modified. Not involved
Not involved
Not involved
Not involved
Not involved
PPP link
Less than 5 minutes
None
PPP link
Less than 5 minutes
None
SCTP link
The both end address of the SCTP is the parameter for the interconne ction. The value can be modified after the negotiation with the The parameter modification peer has no impact on the system. equipment. The both end address of the SCTP is the parameter for the interconne ction. The value can be modified after the negotiation with the The parameter modification peer has no impact on the system. equipment.
SCTP link
Not involved
Not involved
Not involved
Not involved
The parameter cannot be modified. Not involved The SCTP port number is the parameter for the negotiation . The value can be modified after the negotiation with the The parameter modification peer has no impact on the system. equipment. The parameter modification has no impact on the None equipment.
SCTP link
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
When the network status is poor, the check period should not be too small. Otherwise, the path The parameter modification state is has no impact on the affected. equipment.
Not involved
Not involved
None
PPP link
Negotiatio n fails if this parameter The parameter modification is has no impact on the modified. equipment. Negotiatio n fails if this parameter The parameter modification is has no impact on the modified. equipment.
BSC6900
PPP link
Less than 5 minutes
None
NSE
Less than 5 minutes
The SIGBVC must be reset after this switch is turned on. The BSC supports the PFC when the SGSN The transport path should supports be re-established after the the PFC. parameter modification.
Not involved
Not involved
None
Not involved
Not involved
If this parameter is set to a greater value, more paging messages are processed. When the BSC6900 is overloaded , the control on the arrival rate of paging messages does not take effect. If this parameter is set to a smaller value, some paging messages that can be processed The parameter modification by the has no impact on the BSC6900 equipment.
Not involved
Not involved
If this parameter is set to a higher value, more PS paging messages can be processed, thus increasing the BSC load. As a result, the control on the message arrival rate may fail to protect the BSC. If this parameter is set to a lower value, more PS paging messages are discarded, thus The parameter modification affecting has no impact on the the paging equipment. If this parameter is set to a smaller value, the control of the arrival rate of paging messages is sensitive. If this parameter is set to a greater value, the The parameter modification control is has no impact on the insensitive. equipment.
Not involved
Not involved
Not involved
Not involved
The parameter cannot be modified. Not involved The adjacent node ID The parameter modification must be has no impact on the configured. equipment.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Ethernet port
None
Ethernet port
None
Not involved
Not involved
None
Not involved
Not involved
None
Cell
Less than 5 minutes
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter is valid for The parameter modification the EDGE has no impact on the TRX only. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter is valid for The parameter modification the EDGE has no impact on the TRX only. equipment.
Not involved
Not involved
None
Not involved
Not involved
This parameter is valid only for EDGE TRXs and is invalid The parameter modification for ordinary has no impact on the TRXs. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None If "Play switch" is set, the normal calls may be affected.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
1. The block of Ater interface must be configured. 2. If the BSC is configured to the integrated BMTC or A over IP is configured, the configurati on does not support the operation. 3. If the block operation is applicable to only the ATERTS of the BM subrack. You are not allowed to perform The parameter modification the block has no impact on the operation equipment. The parameter cannot be modified. Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
BSC6900
Less than 5 minutes
When the loopback type is changed to REMOTE_ LOOP or LOCAL_L OOP, the service is affected. The service becomes normal when the loopback test is canceled. When the loopback type is set to LOCAL_L OOP, you cannot directly change it to REMOTE_ LOOP. You must change it The parameter modification to has no impact on the NO_LOOP equipment. The parameter modification has no impact on the None equipment. The parameter cannot be modified. Not involved
Not involved
Not involved
Not involved
Not involved
1. This command is applicable to the boards AOUa and POUa. 2. It is used for interworkin g with products of other The parameter modification manufactur has no impact on the ers. equipment.
Not involved
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BTS
Less than 5 minutes
None
The transport path should be re-established after the parameter modification. The transport path should be re-established after the parameter modification.
BTS
Less than 5 minutes
None
BTS
Less than 5 minutes
This parameter can be modified only when the BTS is The transport path should deactivate be re-established after the d. parameter modification.
BTS
Less than 5 minutes
None
BTS
Less than 5 minutes
None
Not involved
Not involved
None
The BTS should be reset to validate the parameter modification. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
If this parameter is set to a greater value, the The parameter modification error is has no impact on the small. equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
BTS
Less than 5 minutes
The parameter cannot be modified. Not involved The BTS should be reset to validate the parameter None modification. The transport path should be re-established after the parameter modification.
BTS
Less than 5 minutes
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The parameter cannot be modified. Not involved The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
ENABLE: the multiplexin g frame function of the PPP link is enabled. DISABLE: the multiplexin g frame function of the PPP The parameter modification link is has no impact on the disabled. equipment.
Not involved
Not involved
This parameter can be added or modified but cannot The parameter modification be has no impact on the removed. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
When the sampling rate of preprocessed measurem ent reports is set to 1, the frequency of submitting preprocessed measurem ent reports should be set to one report per two seconds or one report The parameter modification per four has no impact on the seconds. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None Each layer has 16 priorities, numbered 1-16 respectivel y. If the number of the priority is small, the priority is high. This parameter along with Layer of the Cell determines the priority of a cell. The priority affects the sequence of neighborin g cells for handover. It also affects handover algorithms, such as The parameter modification PBGT has no impact on the handover equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The routing priority is modified. In the case of multiple routes to the same signaling point, the route The parameter modification priority is has no impact on the affected. equipment.
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
BC
Services are interrupted until the parameter is consistent with the SGSN at the peer end.
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved 1. This command is applicable to the boards AOUa and POUa. 2. It is used for interworkin g with products of other The parameter modification manufactur has no impact on the ers. equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
The modificatio n of the parameter affects the adjacent node that is configured with the factor table. After the successful modificatio n, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modificatio n of the The parameter modification existing has no impact on the subscriber equipment. The SIGBVC must be reset after this switch is turned on. The BSC supports the PS HO when the SGSN supports The transport path should the PS be re-established after the HO. parameter modification.
NSE
Less than 5 minutes
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
If this parameter is set to a larger value, more packets are discarded when the congestion occurs. Thus, the priority value of the major service should be smaller than that of The parameter modification the minor has no impact on the service. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
If this parameter is set to a larger value, more packets are discarded when the congestion occurs. Thus, the priority value of the major service should be smaller than that of The parameter modification the minor has no impact on the service. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter should be set on the basis of the actual receiver sensitivity of the BTS and the minimum access level of the MS to avoid the situation where a call cannot be made even though there are The parameter modification signals has no impact on the detected. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
BSC6900
The line code must be consistent with that on the interconne cted side. HDB3 (HDB3 code) and AMI (AMI code) are used for E1 ports. B8ZS (B8ZS code) and AMI_ZCS (AMI code) are used The parameter modification for T1 has no impact on the ports. equipment.
BSC6900
The frame structure must be consistent with that on the The parameter modification interconne has no impact on the cted side. equipment.
BSC6900
BSC6900
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The transmissi on priority of the service is affected if the queue DSCP value of The parameter modification the port is has no impact on the modified. equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter is supported only by the The parameter modification BTS3012A has no impact on the . equipment. This parameter is supported only by the BTS3012A and The parameter modification BTS3006A has no impact on the . equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Cell
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter should be set on the basis of the actual receiver sensitivity of the BTS and the minimum access level of the MS to avoid the situation where a call cannot be made even though there are The parameter modification signals has no impact on the detected. equipment.
Not involved
Not involved
For the BTS3X series and doubletransceiver BTSs, this parameter does not affect MS access but affects the reporting of CCCH_LO AD_IND. If the level received by the BCCH on the network side is greater than the RACH Busy Threshold, the CCCH_LO AD_IND is counted once The parameter modification whether has no impact on the the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
If this parameter is set to Algorithm I, the BTS performs AMR rate adaptation according to the C/I value. If this parameter is set to Algorithm II, the BTS performs AMR rate adaptation according to the BER value. Algorithm II is valid only for the EMR. If this parameter is set to None, the AMR rate adaptation The parameter modification algorithm has no impact on the is not equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
To improve the success rate of reassignm ent, it is recommen ded that you use the default value Different Band. That is, the frequency band of the preferential ly reassigned channel is different from what is used in the original The parameter modification assignmen has no impact on the t. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Cell
Less than 5 minutes
None
Not involved
Not involved
The parameter must be set to a value smaller than the number of TCHs available on the BCCH TRX to prevent the frequent enabling and disabling of the power The parameter modification amplifier of has no impact on the a TRX. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
The setting of this parameter requires negotiation with the MSC, so that the MSC can correctly process The parameter modification HO RQD has no impact on the messages. equipment.
Not involved
Not involved
None
BSC6900
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The range of this parameter is determined by the cell configurati on. The lower limit is 0, and the upper limit is sum of TCHF, TCHH and Dynamic PDCH The parameter modification configured has no impact on the in the cell. equipment.
Not involved
Not involved
If this parameter is set to a greater value, the BTS power decreases too much. If this parameter is set to a smaller value, the BTS power decreases insignifican tly and thus the power decrease effect is The parameter modification unsatisfact has no impact on the ory. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
NSE
Less than 5 minutes
The SIGBVC must be reset after this switch is turned on. The BSC supports the RIM when the SGSN The transport path should supports be re-established after the the RIM. parameter modification.
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
Less than 5 minutes
None
The BSC should be reset to validate the parameter modification.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The resource The parameter modification group must has no impact on the exist. equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
The switch is off in the case of a signaling point to the single link. After the link to a signaling point is disconnect ed, the restart procedure is performed. The services are See the The parameter modification interrupted until the ITU-T has no impact on the signaling point is available. Q704. equipment.
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
Change this parameter will impact the function interrelated with The parameter modification Parameter has no impact on the 1. equipment.
Not involved
Not involved
Change this parameter will impact the function interrelated with The parameter modification Parameter has no impact on the 10. equipment. Change this parameter will impact the function interrelated with The parameter modification Parameter has no impact on the 2. equipment. Change this parameter will impact the function interrelated with The parameter modification Parameter has no impact on the 3. equipment. Change this parameter will impact the function interrelated with The parameter modification Parameter has no impact on the 4. equipment. Change this parameter will impact the function interrelated with The parameter modification Parameter has no impact on the 5. equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Change this parameter will impact the function interrelated with The parameter modification Parameter has no impact on the 6. equipment. Change this parameter will impact the function interrelated with The parameter modification Parameter has no impact on the 7. equipment. Change this parameter will impact the function interrelated with The parameter modification Parameter has no impact on the 8. equipment. Change this parameter will impact the function interrelated with The parameter modification Parameter has no impact on the 9. equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
BSC6900
BSC6900
The services are interrupted until the M3DE is available.
The routing context must be unique and needs to be negotiated The parameter modification with the has no impact on the peer. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The value should be greater than "RTOMIN" and smaller than "RTOMAX" in the command "ADD The parameter modification SCTPLNK" has no impact on the . equipment. The value should be greater than "RTOMIN" in the command "ADD The parameter modification SCTPLNK" has no impact on the . equipment.
Not involved
Not involved
Not involved
Not involved
The value should be smaller than "RTOMAX" in the command "ADD The parameter modification SCTPLNK" has no impact on the . equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
For AMR calls, this parameter, together with "Interfere HO Qual Thresh n for NonAMR FR", is used in interferenc e handover decision. An uplink interferenc e handover is easily triggered if this parameter is set to a The parameter modification smaller has no impact on the value. equipment.
Not involved
Not involved
If the value of this parameter is too small, the required level of received signals is low. Therefore, many MSs attempt to camp on the cell, thus increasing the load of the cell and the risk of call drops. In such a case, you must set the parameter based on the balance conditions of the The parameter modification uplink and has no impact on the downlink equipment.
Not involved
Not involved
None
Not involved
Not involved
This parameter is used in handover decision. An uplink interferenc e handover is easily triggered if this parameter is set to a The parameter modification smaller has no impact on the value. equipment. This parameter is used in handover decision. An uplink interferenc e handover is easily triggered if this parameter is set to a The parameter modification smaller has no impact on the value. equipment. This parameter is used in handover decision. An uplink interferenc e handover is easily triggered if this parameter is set to a The parameter modification smaller has no impact on the value. equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
This parameter is used in handover decision. An uplink interferenc e handover is easily triggered if this parameter is set to a The parameter modification smaller has no impact on the value. equipment. This parameter is used in handover decision. An uplink interferenc e handover is easily triggered if this parameter is set to a The parameter modification smaller has no impact on the value. equipment. This parameter is used in handover decision. An uplink interferenc e handover is easily triggered if this parameter is set to a The parameter modification too small has no impact on the value. equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
This parameter is used in handover decision. An uplink interferenc e handover is easily triggered if this parameter is set to a The parameter modification smaller has no impact on the value. equipment. This parameter is used in handover decision. An uplink interferenc e handover is easily triggered if this parameter is set to a The parameter modification smaller has no impact on the value. equipment. This parameter is used in handover decision. An uplink interferenc e handover is easily triggered if this parameter is set to a The parameter modification too small has no impact on the value. equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
This parameter is used in handover decision. An uplink interferenc e handover is easily triggered if this parameter is set to a The parameter modification smaller has no impact on the value. equipment. This parameter is used in handover decision. An uplink interferenc e handover is easily triggered if this parameter is set to a The parameter modification too small has no impact on the value. equipment. This parameter is used in handover decision. An uplink interferenc e handover is easily triggered if this parameter is set to a The parameter modification smaller has no impact on the value. equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
When the same coverage cell allows the load handover, this parameter should be set to a value lower than "Load HO Threshold" of the same The parameter modification coverage has no impact on the cell. equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
Not involved
Not involved
The setting of this parameter must be negotiated with that on the The parameter modification interconne has no impact on the cted side. equipment. The parameter modification has no impact on the None equipment.
Not involved
Not involved
1. If you set the start date or end date of DST to a day of the week after a specific date, the specific date must be six days or more days prior to the last day of the month. For example, the last day of October is the 31st day. Then, the specific date cannot be later than the 25th (31 6) day. If you set the The parameter modification specific has no impact on the date to equipment.
Not involved
Not involved
None
Not involved
Not involved
If the parameter "IBCA Allowed" is set to YES, the BSC waits for MRs on the SDCCH for the duration specified by the parameter "IBCA Assign Waiting Mr Time". This parameter takes effect when the parameter "IBCA The parameter modification Allowed" is has no impact on the set to NO. equipment.
Not involved
Not involved
None
Not involved
Not involved
The level values 0 through 63 map to 110 dBm to -47 dBm. A smaller value indicates a lower The parameter modification receive has no impact on the level. equipment.
Not involved
Not involved
The parameter value correspond s to RQ (quality level: 0 to 7) multiplied by 10. A greater value indicates a poorer The parameter modification receive has no impact on the quality. equipment.
Not involved
Not involved
The level values 0 through 63 map to 110 dBm to -47 dBm. A smaller value indicates a lower The parameter modification receive has no impact on the level. equipment.
Not involved
Not involved
The parameter value correspond s to RQ (quality level: 0 to 7) multiplied by 10. A greater value indicates a poorer The parameter modification receive has no impact on the quality. equipment. The SDCCH dynamic adjustment converts the TCHs to the SDCCHs, this reduces the available TCHs and decreases the TCH traffic The parameter modification bearing has no impact on the capability. equipment.
Not involved
Not involved
BSC6900
The setting of this parameter must be negotiated with that on the The parameter modification interconne has no impact on the cted side. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter should be set on the basis of the negotiation with the The parameter modification MSC at the has no impact on the peer end. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
None
The BSC should be reset to validate the parameter modification. The BTS should be reset to validate the parameter modification.
BTS
Less than 5 minutes
None
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The ratio of the subscriber s accessing this SGSN is affected when this parameter The parameter modification is has no impact on the modified. equipment. The parameter cannot be modified. Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BSC
If this SGSN is the last SGSN connecting this cell: 1. When the parameter is set to DENY, the services of all the online subscriber s are interrupted and new subscriber s cannot access the network. 2. When the parameter is set to UNINSTAL L, the services of Services are interrupted all the until the parameter is set to online ALLOW or the cell is subscriber The parameter modification configured with a new s are not has no impact on the SGSN. interrupted equipment.
Not involved
Not involved
None
Not involved
Not involved
Cell
Less than 5 minutes
The parameter cannot be modified. Not involved The parameter modification has no impact on the None equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The ratio of Gb interface signaling messages sent through NSVLs is affected when this parameter is modified. When this NSVL is the last NSVL of the normal state in the NSE, if "SIGLW" is set to 0, the signaling exchange between the NSE and SGSN The parameter modification is has no impact on the interrupted. equipment.
Not involved
Not involved
NSE
Services are interrupted until "SIGLW" is not set to 0.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The source IP address can be: local IP address of the PPP link (PEUa/PO Ua/POS), local IP address of the MP group ((PEUa/PO Ua), IP address of the Ethernet port of the local port (FG2a/GO Ua), and IP address The parameter modification of the local has no impact on the board. equipment. The parameter cannot be modified. Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
The modified parameter takes effect after the The parameter modification BSC6900 has no impact on the is reset. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The value of this parameter The parameter modification cannot be has no impact on the changed. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter cannot be modified. 1. The block of Ater interface must be configured. 2. If the BSC is configured to the integrated BMTC or A over IP is configured, the configurati on does not support the operation. 3. If the block operation is applicable to only the ATERTS of the BM subrack. You are not allowed to perform the block operation
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
BTS
Less than 5 minutes
None
BTS
Less than 5 minutes
This parameter can be modified only when the BTS is The parameter modification deactivate has no impact on the d. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
The services are interrupted until the signaling point is available. None
BSC6900
The services are interrupted until the signaling point is available. None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
This parameter should be set on the basis of the negotiation with the MSC at the peer end so that the MSC can process the assignmen t complete message properly. In the assignmen t request, if the speech/dat a indicator in the channel type is data, the assignmen t complete message does not The parameter modification carry has no impact on the SPEECH_ equipment.
Not involved
Not involved
This parameter should be set on the basis of the negotiation with the MSC at the peer end so that the MSC can process the Handover Perform message properly. For SDCCH handovers, the Handover Perform message does not carry speech_ve r even if this parameter The parameter modification is set to has no impact on the Yes. equipment.
Not involved
Not involved
This parameter should be set on the basis of the negotiation with the MSC at the peer end so that the MSC can process the HO REQ ACK The parameter modification message has no impact on the properly. equipment.
Not involved
Not involved
This parameter should be set on the basis of the negotiation with the The parameter modification MSC at the has no impact on the peer end. equipment. This parameter is supported only by the following types of BTSs: BTS3012, BTS3006C , BTS3012A E, BTS3012 II, and The parameter modification BTS3002E has no impact on the . equipment. This parameter is supported only by the following types of BTSs: BTS3012, BTS3006C , BTS3012A E, BTS3012 II, and The parameter modification BTS3002E has no impact on the . equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
The port can be set to the DOWN or UP state when this parameter is modified. If the speed modes on the local and peer end are not consistent, the service The parameter modification can be has no impact on the interrupted. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Cell
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
BTS
Less than 5 minutes
None
BTS
Less than 5 minutes
None
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Clock sources and priorities are in one- The parameter modification to-one has no impact on the mapping. equipment.
Not involved
Not involved
Clock sources and priorities are in one- The parameter modification to-one has no impact on the mapping. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Clock sources and priorities are in oneto-one mapping. Each backplane board 8K clock has only one The parameter modification clock has no impact on the source. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
1. The block of Ater interface must be configured. 2. If the BSC is configured to the integrated BMTC or A over IP is configured, the configurati on does not support the operation. 3. If the block operation is applicable to only the ATERTS of the BM subrack. You are not allowed to perform The parameter modification the block has no impact on the operation equipment. The parameter modification does not impact the None equipment.
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
BTS
Less than 5 minutes
None
BTS
Less than 5 minutes
Not involved
Not involved
None
Subrack connection path Less than 5 minutes
1. The command is used for the configurati on when the TDM resources exist between two subracks. 2. Each subrack must be the BM subrack or The parameter modification TC has no impact on the subrack. equipment. 1. The command is used for the configurati on when the TDM resources exist between two subracks. 2. Each subrack must be the BM subrack or The parameter modification TC has no impact on the subrack. equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
If the interface board clock source of the MPS/TCS subrack is set, you can set the 8 kHz output clock source. For the MPS and TCS, you can set the backplane board 8K output clock as the clock source of the interface board. For the EPS, you cannot The parameter modification perform has no impact on the the setting. equipment. The parameter modification has no impact on the None equipment.
NSE
The ratio of Gb interface signaling messages sent through local NSVLs is affected when this parameter is modified. When this NSVL is the last NSVL of the normal state in the NSE, if "SRVLW" is set to 0, all the packet services of Services are interrupted the local The parameter modification until "SRVLW" is not set to NSE are has no impact on the 0. interrupted. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None In principle, you should not configure the frequencie s on the P frequency band and on the E frequency band in one MA group. If the frequencie s on the P frequency band and on the E frequency band are configured in one MA group, some MSs may not process calls. In this case, you The parameter modification can set has no impact on the this equipment.
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The transport path should be re-established after the parameter modification.
BTS
Less than 5 minutes
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
BTS
Less than 5 minutes
1. The block of A interface must be configured. 2. If the BSC is configured to the integrated BMTC or A over IP is configured, the configurati on does not support the operation. 3. If the block operation is applicable to only the AE1T1 of the BM subrack. You are not allowed to perform the block The parameter modification operation has no impact on the from the equipment. The transport path should be re-established after the None parameter modification.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
When the simple cell broadcast function is enabled, the BSC6900 provides the simple cell broadcast service if the CBC is not provided. The simple cell broadcast function is used to broadcast the messages that are not changed frequently. The simple cell broadcast function and the cell The parameter modification broadcast has no impact on the function equipment.
Not involved
Not involved
The high multislot class function requires the support from the MS. For an MS of a high multislot class 32, 33, or34, the extended dynamic allocation (EDA) function must be used if more than three timeslots are The parameter modification required on has no impact on the the uplink. equipment.
Cell
Less than 5 minutes
None
Not involved
Not involved
The EDA requires the support The parameter modification from the has no impact on the MS. equipment.
Cell
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
This parameter should be set according to the requiremen ts of the existing network. If this parameter is set to Yes, the voice signals are encoded only once at the originating MS and decoded only once at the terminating MS. This improves the QoS of the MS-toMS call. The TFO function is The parameter modification performed has no impact on the only equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Change this parameter will impact the patch function controlled The parameter modification by switch has no impact on the 1. equipment. Change this parameter will impact the patch function controlled The parameter modification by switch has no impact on the 10. equipment.
Not involved
Not involved
Not involved
Not involved
Change this parameter will impact the patch function controlled The parameter modification by switch has no impact on the 2. equipment. Change this parameter will impact the patch function controlled The parameter modification by switch has no impact on the 3. equipment. Change this parameter will impact the patch function controlled The parameter modification by switch has no impact on the 4. equipment. Change this parameter will impact the patch function controlled The parameter modification by switch has no impact on the 5. equipment. Change this parameter will impact the patch function controlled The parameter modification by switch has no impact on the 6. equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Change this parameter will impact the patch function controlled The parameter modification by switch has no impact on the 7. equipment. Change this parameter will impact the patch function controlled The parameter modification by switch has no impact on the 8. equipment. Change this parameter will impact the patch function controlled The parameter modification by switch has no impact on the 9. equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None The physical information is sent over the FACCH. Every four TDMA frames are sent once over the FACCH, which takes 18 ms. If the T3105 timer is set to less than 18 ms, when the T3105 timer expires for the first time, the physical information needs to be retransmitt ed. But at this time, The parameter modification the has no impact on the previous equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
It is recommen ded that you select a greater value, such as 16, 20, or 25, in the area with heavy traffic, but a smaller value, such as 2 or 3, in the area with light traffic. To properly specify the value of this parameter, it is necessary to perform overall and long-term measurem ent on the entities The parameter modification involved has no impact on the regarding equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
According to the GSM protocols, the BSC6900 performs CRC on each TRAU frame. If the CRC of a certain TRAU frame fails, the TRAU frame is regarded as an invalid one. Then, the BSC6900 performs smoothing on the invalid frame, thus eliminating the noise caused by the errors The parameter modification in has no impact on the parameter equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
Less than 5 minutes
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Before switched on, please insure that all the TRXs in this cell are The parameter modification suitable has no impact on the version. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
The parameter cannot be modified. Not involved 1. The command is used for the configurati on when the TDM resources exist between two subracks. 2. Each subrack must be the BM subrack or The parameter modification TC has no impact on the subrack. equipment.
1. The command is used for the configurati on when the TDM resources exist between two subracks. 2. Each subrack must be the BM subrack or The parameter modification TC has no impact on the subrack. equipment.
BSC
The services are interrupted until the PBSL is working normally. None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
For the BTS3001C , BTS3001C P, and BTS3002C , this parameter is invalid. For other BTSs, this The parameter modification parameter has no impact on the is valid. equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The IP address of the TGW cannot use the configured IP address of another TGW . The IP address of TGW cannot be the same as the IP address configured in the BSC6900. Otherwise, operation and maintenan ce channel The parameter modification for TGW has no impact on the fails. equipment.
Not involved
Not involved
The IP address of the TGW cannot use the configured IP address of another TGW. The IP address of TGW cannot be the same as the IP address configured in the BSC6900. Otherwise, operation and maintenan ce channel The parameter modification for TGW has no impact on the fails. equipment.
Not involved
Not involved
None
Not involved
Not involved
The IP address of the TGW cannot use the configured IP address of another TGW . The IP address of TGW cannot be the same as the IP address configured in the BSC6900. Otherwise, operation and maintenan ce channel The parameter modification for TGW has no impact on the fails. equipment.
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Multi-band networks cannot use the TIGHT The parameter modification BCCH has no impact on the algorithm. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not Involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The TRMMAP The parameter modification must be has no impact on the configured. equipment. The parameter modification has no impact on the None equipment. The parameter modification has no impact on the None equipment.
Not involved
Not involved
None
Not involved
Not involved
1. If you set "Upper time threshold of raised fault" and "Lower time threshold of raised fault" to "0", the accumulat ed alarm blink duration is counted but not reported. 2. If "Upper time threshold of raised fault" is not "0", the value of "Lower time threshold of raised fault" cannot be The parameter modification "0" and has no impact on the you must equipment.
Not involved
Not involved
None
Not involved
Not involved
1. If you set "Upper time threshold of raised fault" and "Lower time threshold of raised fault" to "0", the accumulat ed alarm blink duration is counted but not reported. 2. If "Upper time threshold of raised fault" is not "0", the value of "Lower time threshold of raised fault" cannot be The parameter modification "0" and has no impact on the you must equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
BTS
Less than 5 minutes
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter modification has no impact on the None equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The TRM load threshold must be The parameter modification configured has no impact on the already. equipment. The TRM load threshold must be The parameter modification configured has no impact on the already. equipment. The TRM load threshold must be The parameter modification configured has no impact on the already. equipment. The parameter cannot be modified. Not involved The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved The parameter cannot be modified. Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
This parameter specifies whether to enable the TRX aiding function. BCCH aiding: The main BCCH is aided to another normal TRX in this cell. BCCH aiding switchback : BCCH aiding switchback functions after the originally configured BCCH TRX is recovered. Baseband FH aiding: When the The parameter modification TRX has no impact on the involved in equipment. The parameter modification has no impact on the None equipment. After this parameter is modified, the services in the cell are handed over forcedly. The cell is reset after all the handover succeeds The cell should be or after ten activated after the seconds. parameter modification.
Cell
Less than 1 minute
Not involved
Not involved
BTS
Less than 5 minutes
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Cell
Less than 5 minutes
None
Not involved
Not involved
None
Cell
Less than 1 minute
After this parameter is modified, the services in the cell are handed over forcedly. The cell is reset after all the handover succeeds The cell should be or after ten activated after the seconds. parameter modification.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
1. The block of A interface must be configured. 2. If the BSC is configured to the integrated BMTC or A over IP is configured, the configurati on does not support the operation. 3. If the block operation is applicable to only the AE1T1 of the BM subrack. You are not allowed to perform the block The parameter modification operation has no impact on the from the equipment.
Cell
Less than 5 minutes
Loopback test, which cause the service The parameter modification interruption has no impact on the on this link equipment.
Not involved
Not involved
None
BTS
Less than 5 minutes
None
Not involved
Not involved
Not involved
Not involved
None
PPP link
Less than 5 minutes
The modificatio n of the PPP link that is between the BTS and the BSC will affect the services. The modificatio n of the PPP link that is between the BTS and the lower-level BTSs will lead to intermittent services carried by the lower- The transport path should level be re-established after the BTSs. parameter modification.
Cell
Less than 1 minute
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BTS
Less than 5 minutes
None
Not involved
Not involved
None
BSC
The services are interrupted until the PBSL is working normally. None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
If this parameter is set to a great value, the PS DSP The parameter modification load will be has no impact on the heavy. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None.
Not involved
Not involved
None.
Not involved
Not involved
None.
Not involved
Not involved
None.
Not involved
Not involved
None.
Not involved
Not involved
None.
Not involved
Not involved
None.
Not involved
Not involved
None.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The value of this parameter The cell should be cannot be activated after the changed. parameter modification. The modified parameter takes effect after The BSC should be reset to the BSC is validate the parameter reset. modification.
BSC
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
If this parameter is set to 0, the emergency The parameter modification call may be has no impact on the affected. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
When RAI alarms occur on the E1 link, services cannot be assigned again by default. After the switch is enabled, services can be assigned, but singlepass may occur on the The parameter modification ongoing has no impact on the services. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
NSE
Services are interrupted unless the NSVL configuration is the same as the SGSN configuration at the BSC. None
Not involved
Not involved
None
Not involved
Not involved
The setting of this parameter must be greater than The parameter modification "LHUMTH has no impact on the D". equipment.
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
If this parameter is set to a small value, the detection of service type is sensitive and may lead to ping-pong switching between The parameter modification different has no impact on the services. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The setting of this parameter affects the triggering of BQ(Bad Quality) handover of AMR FR calls. If it is set to a smaller value, the uplink BQ handover The parameter modification is easily has no impact on the triggered. equipment.
Not involved
Not involved
The setting of this parameter affects the triggering of BQ handover of AMR HR calls. If it is set to a smaller value, the uplink BQ handover The parameter modification is easily has no impact on the triggered. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BTS
Less than 5 minutes
None
BTS
Less than 5 minutes
Not involved
Not involved
None
Not involved
Not involved
BTS
Less than 5 minutes
None
BTS
Less than 5 minutes
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
In a GSM900 cell, the power control level of the MS ranges from 0 to 19. Generally, the maximum transmit power supported by an MS is level 5 (mapping to 33 dBm). The minimum transmit power supported by an MS is level 19 (mapping to 5 dBm). Other transmit power levels are The parameter modification reserved has no impact on the for highequipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Pay special attention to the setting of this parameter during an upgrade. If sending short messages is allowed, this parameter must be set to No. If this parameter is set to Yes, radio channels cannot be used to send short messages regardless of whether an MS is The parameter modification busy or has no impact on the not. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
The setting of this parameter must be greater than The parameter modification "LTEMTH has no impact on the D". equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
IP path
Less than 5 minutes
None
Not involved
Not involved The services are interrupted until the SCTP link is working normally.
SCTP link
None
SCTP link
None
BSC6900
Incorrect setting of this parameter can lead to access failure to If the mode is not set back, the target The parameter modification will interrupt service until it IP has no impact on the is set back. address. equipment. The parameter cannot be modified. Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
BSC6900
Incorrect setting of this parameter can lead to access failure to If the mode is not set back, the target The parameter modification will interrupt service until it IP has no impact on the is set back. address. equipment.
BSC6900
Incorrect setting of this parameter can lead to access failure to If the mode is not set back, the target The parameter modification will interrupt service until it IP has no impact on the is set back. address. equipment. The existing networking can be affected when the relation between the VLAN and the The parameter modification DSCP are has no impact on the reset. equipment.
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
If this parameter is set to a smaller value, the The parameter modification error is has no impact on the smaller. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
If the timer is set to a greater value, the time of reserving channel resources for an emergency call is long. In this case, the channel usage for ordinary calls is affected. If the timer is set to a smaller value, reserved channel resources may not be assigned to an emergency call. In this The parameter modification case, the has no impact on the call fails. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
BSC6900
Less than 5 minutes
The conversion from E1 to T1 or from T1 to E1 takes effect after The parameter modification the board has no impact on the is reset. equipment.
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
None
Not involved
Not involved
Not involved
Not involved
None
Impact on Radio Network PerformanceIntroduced in Version Attribute
The smaller the value of this parameter is, the more MSs select a neighboring cell in directed retry.
BSC6900 V900R011 Radio
The smaller the value of this parameter is, the more MSs select a neighboring cell in directed retry.
The setting of this parameter affects the access delay of parts of MSs. BSC6900 V900R011 Radio
None
Versions earlier than BSC6900 V900R011 Equipment
None
None
None
None
BSC6900 V900R011 Transport
None
Versions earlier than BSC6900 V900R011 Transport
None
None
None
Versions earlier than BSC6900 V900R011 Radio
None
None
None
None
None
When the access control function is enabled, some MSs are caused to be inaccessible to the network for some time.
None
None
None
The throughput is affected.
None
None
None
None
None
None
None
The ACS may affect the MOS.
None
None
None
None
None
None
The switching from an intra-cell handover procedure to an assignment procedure shortens the duration of the intra-cell handover.
None
BSC6900 V900R011 Equipment
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to OPEN, the acoustic echo can be cancelled to improve the speech quality.
None
None
If this parameter is set to higher value, channel resources may be wasted; if this parameter is set to lower value, the call Versions earlier than drop rate may increase. BSC6900 V900R011 Radio
None
Not involved
If this parameter is set to higher value, channel resources may be wasted; if this parameter is set to lower value, the call Versions earlier than drop rate may increase. BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment
None
None
None
None
None
Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment
None
None
None
Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to OPEN, the voltage level can be adjusted automatically to improve the speech quality.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a smaller value, the dynamic power adjustment range for the BTS is decreased. This may cause power waste and increase network interference when the downlink quality is Versions earlier than good. BSC6900 V900R011 Radio
None
When this parameter is set to YES and the value of the downlink threshold is not reasonable, the algorithm can be used to dynamically adjust the AMR downlink rate to increase the downlink speech MOS. BSC6900 V900R011 Radio
None
None
If this parameter is set to a smaller value, downlink power control may not be performed when the voice quality is good, thus causing the power waste and increasing the interference. If this parameter is set to a greater value, downlink power control may be performed when the voice quality is bad, Versions earlier than thus affecting the voice quality. BSC6900 V900R011 Radio
If this parameter is set to a greater value, uplink power control may not be performed when the voice quality is bad, thus affecting the voice quality. If this parameter is set to a smaller value, uplink power control may be performed when the voice quality is good, thus causing the power waste and increasing Versions earlier than the interference. BSC6900 V900R011 Radio
None
None
None
If this parameter is set to a greater value, downlink power control may not be performed when the downlink level is high, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, downlink power control may be performed when the downlink power is Versions earlier than low, in this way, call drops may occur. BSC6900 V900R011 Radio
If this parameter is set to a greater value, uplink power control may be performed when the downlink level is high, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, power control may not be performed when the downlink power Versions earlier than is low, in this way, call drops may occur. BSC6900 V900R011 Radio
If this switch is turned on, AMR FR calls can be switched into AMR HR calls to relieve the network congestion, but the voice quality is decreased; if this switch is turned off, AMR FR calls cannot be switched into AMR HR calls, that is, network congestion cannot be relieved through the handover from TCHF to TCHH.
If this parameter is set to a greater value, the handover margin is increased in a short period and many MSs are handed over from TCHF to TCHH, thus affecting the voice quality. If this parameter is set to a smaller value, the handover margin is enlarged slowly and it takes a long time to initiate a TCHF-TCHH handover. Thus, network Versions earlier than congestion cannot be relieved in time. BSC6900 V900R011 Radio
If this parameter is set to a greater value, only MSs in the center of the cell can meet the handover condition. Thus, the network congestion cannot be relieved in time. If this parameter is set to a smaller value, MSs at the edge of the cell can also meet the handover condition, thus Versions earlier than affecting the voice quality. BSC6900 V900R011 Radio
If this parameter is set to a greater value, MSs at the edge of the cell can also meet the handover condition, thus affecting the voice quality. If this parameter is set to a smaller value, only MSs in the center of the cell can meet the handover condition. Thus, the network congestion cannot be relieved in Versions earlier than time. BSC6900 V900R011 Radio
If this parameter is set to a greater value, MSs with poor quality can also meet the handover condition, thus affecting the voice quality. If this parameter is set to a smaller value, little MSs can meet the handover condition. Thus, the network congestion Versions earlier than cannot be relieved in time. BSC6900 V900R011 Radio
If this parameter is set to a greater value, the calls cannot be handed over to TCHH in a short period when the traffic volume is increased greatly. Thus, the network congestion cannot be relieved in time. If this parameter is set to a smaller value, calls are handed over to TCHH unnecessarily, thus causing MOS loss of Versions earlier than the customer. BSC6900 V900R011 Radio
If this parameter is set to a greater value, only MSs in the center of the cell use the TCHH, thus leading to timeslot waste and the network congestion cannot be relieved in time. If this parameter is set to a smaller value, MSs at the edge of the cell and with poor quality also cannot be handed over to the TCHF, thus affecting Versions earlier than the voice quality. BSC6900 V900R011 Radio
If this parameter is set to a greater value, MSs at the edge of the cell and with poor quality also cannot be handed over to the TCHF, thus affecting the voice quality. If this parameter is set to a smaller value, only MSs in the center of the cell use the TCHH, thus leading to timeslot waste and the network congestion cannot be Versions earlier than relieved in time. BSC6900 V900R011 Radio
None
If this parameter is set to a greater value, handover cannot be triggered even when the quality is poor, thus affecting the voice quality; if this parameter is set to a smaller value, handover is triggered even when the quality is good, thus the network congestion cannot be relieved in Versions earlier than time. BSC6900 V900R011 Radio
If this parameter is set to a smaller value, calls are handed over to TCHH unnecessarily, thus causing MOS loss of the customer; if this parameter is set to a greater value, TCHF-TCHH handover is performed only when the traffic volume is high, and thus network congestion may Versions earlier than occur. BSC6900 V900R011 Radio
If this parameter is set to a smaller value, call drops may occur due to delayed power control; if this parameter is set to a greater value, power waste may occur and network interference may be Versions earlier than increased. BSC6900 V900R011 Radio
If this parameter is set to a smaller value, fast power control cannot be realized. If this parameter is set to a greater value, the power control may be performed Versions earlier than excessively, thus leading to call drops. BSC6900 V900R011 Radio
If this parameter is set to a smaller value, call drops may occur due to delayed power control; if this parameter is set to a greater value, power waste may occur and network interference may be Versions earlier than increased. BSC6900 V900R011 Radio
None
If this parameter is set to a greater value, power control may not be performed in time. If this parameter is set to a smaller value, power control may be performed frequently, thus increasing the signaling Versions earlier than load. BSC6900 V900R011 Radio
If this parameter is set to a smaller value, the algorithm cannot realize fast power control. If this parameter is set to a Versions earlier than greater value, call drops may occur. BSC6900 V900R011 Radio
None
None
If this parameter is set to a greater value, cell congestion may not be relieved. If this parameter is set to a smaller value, TCHFs may be assigned unnecessarily, Versions earlier than thus affecting the voice quality. BSC6900 V900R011 Radio
When this parameter is set to YES and the value of the uplink threshold is not reasonable, the algorithm can be used to dynamically adjust the AMR uplink rate to increase the uplink speech MOS. BSC6900 V900R011 Radio
None
None
None
None
None
If this parameter is set to a greater value, power control may not be performed when the uplink level is high, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, downlink power control may be performed when the uplink power is low, in this way, call Versions earlier than drops may occur. BSC6900 V900R011 Radio
If this parameter is set to a greater value, uplink power control may be performed when the uplink level is high, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, power control may not be performed when the uplink power is Versions earlier than low, in this way, call drops may occur. BSC6900 V900R011 Radio
None
None
None
If this parameter is set to OPEN, the noise can be compensated automatically Versions earlier than to improve the speech quality. BSC6900 V900R011 Equipment
None
None
None
None
Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Equipment
None
None
None
None
If this parameter is set to OPEN, the noise can be depressed automatically to Versions earlier than improve the speech quality. BSC6900 V900R011 Equipment
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to YES, the voice quality is enhanced and the handover times is reduced, but the call access delay is prolonged. The call access delay is affected by both the setting of "Maximum Assigning Duration" and the duration for waiting MRs on the SDCCH. The maximum delay is the value of "Maximum Assigning Duration". Enabling this function may cause SDCCH congestion. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
If this parameter is set to a higher value, channel resources may be wasted and congestion occurs; if this parameter is set to a lower value, the assignment Versions earlier than success rate may decrease. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, the overlaid subcell range in the algorithm is smaller than the actual range, thus leading to the unbalance between the traffic volume on the overlaid subcell and that on the underlaid Versions earlier than subcell. BSC6900 V900R011 Radio
None
None
If this parameter is set to a greater value, TCHFs are preferentially selected even when congestion occur on the Ater interface, thus decreasing the system capacity. If this parameter is set to a lower value, TCHHs are selected when no congestion occur on the Ater interface, thus Versions earlier than decreasing the voice quality. BSC6900 V900R011 Equipment
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, the handover cannot be performed in time, thus the voice quality is decreased and call drops may occur. If this parameter is set to a smaller value, unnecessary handovers may be Versions earlier than performed. BSC6900 V900R011 Radio
If this parameter is set to a greater value, unnecessary handovers may be performed. If this parameter is set to a smaller value, handovers cannot be performed in time. Thus the voice quality is decreased and Versions earlier than call drops may occur. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, the handover cannot be performed in time. Thus, the voice quality is decreased and call drops may occur. If this parameter is set to a smaller value, unnecessary handovers may be Versions earlier than performed. BSC6900 V900R011 Radio
None
If this parameter is set to a greater value, unnecessary handovers may be performed. If this parameter is set to a smaller value, the handover cannot be performed in time. Thus, the voice quality is Versions earlier than decreased and call drops may occur. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Equipment
None
None
None
None
None
None
None
None
None
The setting of this parameter may affect the MS paging response and performance of the system. A greater value may decrease the number of paging blocks, paging capacity, and paging success rate.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, the number of paging subchannels in a cell increases and the number of MSs on each paging subchannel decreases. This can prolong the average service life of MS batteries but increase the delay of paging messages and degrade the Versions earlier than system performance. BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio
None
None
None
None
None
Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment
None
None
None
None
Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport
None
None
None
None
None
None
Not involved
None
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
If this parameter is set to BTS_Preprocessing, signaling on the Abis interface and BSC load are decreased, thus enhancing the response Versions earlier than speed and the network performance. BSC6900 V900R011 Radio
None
Not involved
None
None
None
If this parameter is set to a smaller value, the range of BTS dynamic power adjustment is decreased, and thus network interference is difficult to be Versions earlier than reduced. BSC6900 V900R011 Radio
None
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Call reestablishment can decrease the call drop rate but waste channel resources.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Transport
None
None
None
None
None
None
If this parameter is set to a smaller value, the status of RF resources is reported too frequently, thus burdening the BSC6900. If this parameter is set to a greater value, the status of RF resources cannot be updated in time; therefore, the BSC6900 cannot handle the interference to the BTS, thus causing unreasonable Versions earlier than channel allocation. BSC6900 V900R011 Radio
If this parameter is set to smaller value, the signaling flow over the Abis interface increases, thus burdening the BSC6900. If this parameter is set to a greater value, the BSC6900 cannot handle the exceptions on the BTS in time, thus Versions earlier than causing network congestion. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a smaller value, dynamic adjustment may not be triggered when there are insufficient SDCCHs in the cell, this affects the access success rate. If this parameter is set to a greater value, traffic volume on Versions earlier than the TCH is decreased. BSC6900 V900R011 Radio
None
None
None
None
Not involved
None
None
None
None
None
None
None
None
This feature only applies to the areas covered by both the GSM network and the UMTS network. The UMTS network is preferentially used to perform the data services, and the GSM network is preferentially used to perform the speech services. When a user is handed over to the GSM network during a call, the user must return to the UMTS network immediately after the call is complete. Thus, a location update is avoided. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
If this parameter is set too small, the congestion control duration is too long, and thus the transmission capability of signaling links cannot be fully used. If the difference between the values of "CSTARTTHD" and "CENDTHD" is small, the signaling link is unstable and congestion control is performed frequently. In this case, the paging Versions earlier than messages may be abandoned. BSC6900 V900R011 Equipment
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The setting of this parameter depends on the actual physical location of the chain neighboring cell. Otherwise, fast PBGT handover may fail. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
This parameter can be used to limit the user access type to control the network load; however, some users may be adversely affected. Therefore, it is recommended that this parameter be disabled.
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a smaller value, handovers may be performed frequently; if this parameter is set to a greater value, handovers may not be performed in time Versions earlier than and call drops may occur. BSC6900 V900R011 Radio
If this parameter is set to a smaller value, handovers may be performed frequently; if this parameter is set to a greater value, handovers may not be performed in time Versions earlier than and call drops may occur. BSC6900 V900R011 Radio
None
None
None
None
None
None
The MS cannot respond to the paging during the location update, thus decreasing the call completion rate in the system. If this parameter is set to a smaller value, pingpong location update may occur, thus increasing the signaling load on the SDCCH. If this parameter is set to a greater value, the MS may not camp on an optimum cell for a long time after entering a new Versions earlier than location area. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If the value of this parameter is too high, the congestion control is delayed, which leads to deteriorated performance on the signaling link and certain messages may be lost. If the difference between the values of "CSTARTTHD" and "CENDTHD" is small, the signaling link is unstable and congestion control is performed frequently. In this case, the paging Versions earlier than messages may be abandoned. BSC6900 V900R011 Equipment
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this timer is set to a greater value, channel resources may be wasted, thus causing congestion.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Equipment
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
If this function is enabled, number of signaling channel handovers is increased and the access speed is decreased, but the congestion on the BCCH-compatible SDCCH can be relieved and the access success rate is enhanced.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a smaller value, call drops may occur due to delayed handover; if this parameter is set to a greater value, unnecessary handover may be performed, thus affecting the Versions earlier than voice quality. BSC6900 V900R011 Radio
None
If the parameter is set to a relatively great value, down power adjustment may not be performed when the downlink quality is good, thus causing power waste and increasing the interference. If this parameter is set to a relatively small value, down power adjustment may be performed when the downlink quality is Versions earlier than poor. In this case, call drops may occur. BSC6900 V900R011 Radio
If the parameter is set to a relatively great value, up power adjustment may be performed when the downlink quality is good, thus causing power waste and increasing the interference. If this parameter is set to a relatively small value, up power adjustment may not be performed when the downlink quality is poor. In this case, call drops may occur.
The throughput of the GPRS service is affected.
If the parameter is set to a relatively great value, down power adjustment may not be performed when the downlink quality is good, thus causing power waste and increasing the interference. If this parameter is set to a relatively small value, down power adjustment may be performed when the downlink quality is Versions earlier than poor. In this case, call drops may occur. BSC6900 V900R011 Radio
If the parameter is set to a relatively great value, up power adjustment may be performed when the downlink quality is good, thus causing power waste and increasing the interference. If this parameter is set to a relatively small value, up power adjustment may not be performed when the downlink quality is poor. In this case, call drops may occur.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a relatively small value, the fast power control on the downlink cannot be implemented. If this parameter is set to a relatively great value, the power control may be performed excessively on the downlink, thus leading to poor quality, low level, Versions earlier than and ping-pong power control. BSC6900 V900R011 Radio
If this parameter is set to a relatively small value, call drops may occur due to delayed power control in the downlink. If this parameter is set to a relatively great value, the power control may be performed excessively on the downlink, Versions earlier than thus leading to ping-pong power control. BSC6900 V900R011 Radio
None
None
None
None
None
If this parameter is set to a greater value, handover may not be performed when the downlink voice quality is bad, thus leading to call drops. If this parameter is set to a smaller value, unnecessary handovers may be performed, thus decreasing the user experience and Versions earlier than network traffic load. BSC6900 V900R011 Radio
If this parameter is set to a smaller value, the handovers due to bad downlink quality may increase, thus decreasing the handover success rate. If this parameter is set to a greater value, handovers due to bad downlink quality are less possible to occur, thus Versions earlier than increasing the call drop rate. BSC6900 V900R011 Radio
If this parameter is set to a smaller value, the handovers due to bad downlink quality may increase, thus decreasing the handover success rate. If this parameter is set to a greater value, handovers due to bad downlink quality are less possible to occur, thus Versions earlier than increasing the call drop rate. BSC6900 V900R011 Radio
None
None
If this parameter is set to a greater value, decrease power control may not be performed when the downlink level is high, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, decrease power control may be performed when the downlink power is Versions earlier than low, in this way, call drops may occur. BSC6900 V900R011 Radio
If this parameter is set to a greater value, increase power control may be performed when the downlink level is high, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, increase power control may not be performed when the downlink power is Versions earlier than low, in this way, call drops may occur. BSC6900 V900R011 Radio
None
None
None
None
None
None
If this parameter is set to a greater value, decrease power control may not be performed when the downlink level is high, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, decrease power control may be performed when the downlink power is Versions earlier than low, in this way, call drops may occur. BSC6900 V900R011 Radio
If this parameter is set to a greater value, increase power control may be performed when the downlink level is high, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, increase power control may not be performed when the downlink power is Versions earlier than low, in this way, call drops may occur. BSC6900 V900R011 Radio
If this parameter is set improperly to a small value, the downlink assignment procedure may fail. Therefore, it is recommended that this parameter be greater than 80 ms.
None
None
The coding rate and MOS are affected.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
As the double antenna gain increases, the downlink power increases; as the double antenna gain decreases, the downlink power decreases.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
If this parameter is set to a greater value, the corresponding neighboring 3G cell may be difficult to become the candidate neighboring cell of the serving cell. In this way, call drops may occur because the handovers may not be performed timely. If this parameter is set to a smaller value, a call may be handed over to a neighboring 3G cell with low signal Versions earlier than strength, thus affecting voice quality. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater or a smaller value, the balance between the traffic volume on the overlaid subcell and that on the underlaid subcell may not be Versions earlier than achieved. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Radio
None
None
None
If this parameter is set to a greater value, congestion may occur in the underlaid subcell; if this parameter is set to a smaller value, congestion may occur in Versions earlier than the overlaid subcell. BSC6900 V900R011 Radio
The number of block retransmissions is decreased and the throughput is increased.
None
If this parameter is set to a smaller value, congestion may occur in the underlaid subcell in a short time; if this parameter is set to a greater value, congestion in the overlaid subcell is difficult to be Versions earlier than relieved. BSC6900 V900R011 Radio
If this parameter is set to a greater value, congestion may occur in the underlaid subcell in a short time; if this parameter is set to a smaller value, congestion in the overlaid subcell is difficult to be Versions earlier than relieved. BSC6900 V900R011 Radio
If this parameter is set to a greater value, traffic load on the underlaid subcell is increased, and thus congestion may occur in the underlaid subcell. If this parameter is set to a smaller value, traffic load on the overlaid subcell is increased, and thus congestion may Versions earlier than occur in the overlaid subcell. BSC6900 V900R011 Radio
None
None
If this parameter is set to a greater value, the congestion relieving speed in the underlaid subcell is decreased. If this parameter is set to a smaller value, traffic load on the overlaid subcell is increased, and thus congestion may Versions earlier than occur in the overlaid subcell. BSC6900 V900R011 Radio
If this parameter is set to NO, the forced handover and call delay caused by timeslot arrangement can be avoided, but this may cause some TCHF-only calls to fail. If this parameter is set to Yes, calls may fail when the timeslot arrangement fails and when the MS does not select the Versions earlier than TCHF in the concentric cell. BSC6900 V900R011 Radio
None
None
If this parameter is set to a greater value, congestion in the underlaid subcell may not be relieved in time. If this parameter is set to a smaller value, many calls may be handed over from the underlaid subcell to the overlaid subcell in a shot period, thus causing network congestion in the overlaid subcell and handover Versions earlier than failure. BSC6900 V900R011 Radio
If this parameter is set to OPEN, the speech quality can be improved when the signal strength is low on the air interface.
None
None
None
None
None
None
None
None
None
If this timer is set to a greater value, channel resources may be wasted, thus causing congestion. If this timer is set to a smaller value, the success rate of immediate assignment may decrease.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, the effectiveness of power control is reduced, and thus the network interference can not be reduced effectively. If this parameter is set to a smaller value, call drops may occur due Versions earlier than to excessive power control. BSC6900 V900R011 Radio
If this parameter is set to a greater value, the effectiveness of power control is reduced, and thus the network interference can not be reduced effectively. If this parameter is set to a smaller value, call drops may occur due Versions earlier than to excessive power control. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, call drops may occur due to no suitable neighboring cell for handover. If this parameter is set to a smaller value, handover success rate may be Versions earlier than decreased. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
This parameter affects only the statistical result of the counter "FER I (I = 0-7) Quality Level N". BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to YES, the speech quality is improved.
None
None
None
None
None
None
None
None
None
This technology prevents the loss of measurement reports caused by the BSIC that cannot be decoded, improves the system performance, and ensures the radio handover success rate of the Versions earlier than BSC6900. BSC6900 V900R011 Radio
The discontinuous transmission (DTX) function allows a transmitter to stop power transmission in the case of no voice transfer. This function has the following benefits: In the uplink: decreasing the power consumption of the MS and reducing system interference In the downlink: decreasing power consumption of the BTS, reducing system interference, and reducing intermodulation inside the BTS From the network perspective, the interfrequency interference is reduced and Versions earlier than the network quality is improved. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The setting of this parameter must be consistent with the actual frequency reuse pattern of the TRX. Otherwise, the Versions earlier than speech quality will be bad. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, the voice quality may be decreased. If this parameter is set to a smaller value, the congestion relieving capability may Versions earlier than be decreased. BSC6900 V900R011 Radio
If this parameter is set to a smaller value, the duration of an AMR TCHF-TCHH handover is short after the handover is triggered. Thus, few MSs can be handed over from TCHF to TCHH, and the congestion relieving capability is decreased. If this parameter is set to a greater value, the duration of an AMR TCHF-TCHH handover is long after the handover is triggered. Thus, even the MSs on the edge of the cell are handed over from TCHF to TCHH, and the voice quality Versions earlier than deteriorates. BSC6900 V900R011 Radio
If this parameter is set to a greater value, the handover cannot be performed in time and network congestion may occur. If this parameter is set to a smaller value, unnecessary handovers may be Versions earlier than performed. BSC6900 V900R011 Radio
If this parameter is set to a greater value, network congestion may occur because the handover may not be performed timely. If this parameter is set to a smaller value, Versions earlier than the voice quality may be decreased. BSC6900 V900R011 Radio
If this parameter is set to a smaller value, the handover zone is enlarged in a short time, and thus many MSs are handed over from TCHF to TCHH. If this parameter is set to a greater value, the handover zone is enlarged slowly and it takes a long time to initiate a TCHF-TCHH handover. Thus, and the congestion relieving capability is Versions earlier than decreased. BSC6900 V900R011 Radio
If this parameter is set to a greater value, unnecessary handovers may be performed. If this parameter is set to a smaller value, network congestion may occur because the handover may not be performed Versions earlier than timely. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, only an MS close to the overlaid subcell can be assigned TCHHs. Thus, timeslots are wasted. If this parameter is set to a smaller value, an MS of bad quality on the edge of the overlaid subcell cannot be handed over from TCHH to TCHF. Thus, the voice Versions earlier than quality of the call is decreased. BSC6900 V900R011 Radio
None
If this parameter is set to a greater value, the TCHH-to-TCHF handover cannot be performed in time, thus the voice quality is decreased. If this parameter is set to a smaller value, unnecessary handovers may be Versions earlier than performed. BSC6900 V900R011 Radio If this parameter is set to a greater value, only MSs in the center area of the overlaid subcell can be assigned TCHHs. Thus, timeslots are wasted and the congestion relieving capability is decreased. If this parameter is set to a smaller value, MSs on the edge of the overlaid subcell also use the TCHH. Thus, the voice Versions earlier than quality of the call is decreased. BSC6900 V900R011 Radio
If this parameter is set to a greater value, unnecessary handovers may be performed. If this parameter is set to a greater value, the handover cannot be performed in time, and thus the voice quality is Versions earlier than decreased. BSC6900 V900R011 Radio
None
None
None
None
If this parameter is set to a greater value, the MS takes a longer time to meet the conditions for triggering the handover and the handover cannot be performed in time. Thus, call drops may occur or more handovers are triggered. If this parameter is set to a smaller value, the MS takes a shorter time to meet the conditions for triggering the handover, and thus network congestion may occur Versions earlier than on the macro cell. BSC6900 V900R011 Radio
If this parameter is set to a greater value, congestion may occur in the macro cell. If this parameter is set to a smaller value, the handover cannot be performed in time. Thus, call drops may occur or more Versions earlier than handovers are triggered. BSC6900 V900R011 Radio
None
None
None
None
Not involved
None
None
None
None
None
None
None
This parameter limits the number of candidate cells. If this parameter is set to a greater value, some desired cells may be excluded from the candidate cells and call drops may occur. If this parameter is set to a smaller value, an unwanted cell may become the candidate cell, thus leading to handover failures or call Versions earlier than drops. BSC6900 V900R011 Radio
None
None
None
If this parameter is set to YES, the probability of MS handover to the cell in the direction opposite to the moving direction during fast handover is reduced.
If this parameter is set to a great value, there are strict restrictions on the judgement of the MS moving direction.
If this parameter is set to a great value, there are strict restrictions on the judgement of the MS moving direction.
If this parameter is set to a smaller value, unnecessary handovers may be performed. If this parameter is set to a greater value, call drops may occur because the Versions earlier than handover may not be performed timely. BSC6900 V900R011 Radio
If this parameter is set to a too great value, the handover cannot be performed timely, and the speech quality is deteriorated or call drop occurs. If this parameter is set to a too small value, unnecessary handovers may be Versions earlier than performed. BSC6900 V900R011 Radio
If this parameter is set to a greater value, the handover cannot be performed in time and call drops may occur. If this parameter is set to a smaller value, unnecessary handovers may be Versions earlier than performed. BSC6900 V900R011 Radio
None
If this parameter is set to a greater value, call drops may occur because the handover may not be performed timely. If this parameter is set to a smaller value, unnecessary handovers may be Versions earlier than performed. BSC6900 V900R011 Radio
If this parameter is set to a smaller value, call drops may occur because the handover may not be performed timely. If this parameter is set to a greater value, unnecessary handovers may be Versions earlier than performed. BSC6900 V900R011 Radio
None
If this parameter is set to a greater value, congestion may occur in the underlaid subcell. If this parameter is set to a smaller value, Versions earlier than ping-pong handovers may occur. BSC6900 V900R011 Radio
None
None
None
If this parameter is set to YES, the probability that the BTS transmits at full power increases. This increases the interference but the handover success rate also increases.
None
None
None
None
If this parameter is set to "NO_FH", the anti-interference capability of the TRX is Versions earlier than decreased. BSC6900 V900R011 Radio
If this parameter is set to a greater value, it is difficult for the MS to be handed over to the original cell, thus leading to call drop when there is no suitable neighboring cell. If this parameter is set to a smaller value, the MS is likely to be handed over to the original cell again, thus leading to ping- Versions earlier than pong handovers. BSC6900 V900R011 Radio
None
If this parameter is set to a too great value, the handover cannot be performed timely, and the speech quality is deteriorated or call drop occurs. If this parameter is set to a too small value, unnecessary handovers may be Versions earlier than performed. BSC6900 V900R011 Radio
None
If this parameter is set to a greater value, unnecessary handovers may be performed. If this parameter is set to a smaller value, call drops may occur because the Versions earlier than handover may not be performed timely. BSC6900 V900R011 Radio
None
None
None
If this parameter is set to a smaller value, unnecessary handovers may be performed. If this parameter is set to a greater value, call drops may occur because the Versions earlier than handover may not be performed timely. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a smaller value, the network interference is increased; if this parameter is set to a greater value, Versions earlier than congestion may occur in the cell. BSC6900 V900R011 Radio
None
If this parameter is set to a greater value, the call duration is prolonged; if this parameter is set to a smaller value, the IBCA estimation accuracy is reduced. BSC6900 V900R011 Radio
None
None
None
None
None
If this parameter is set to a greater value, the handover duration is prolonged and thus the handover cannot be performed in time; if this parameter is set to a smaller value, the IBCA estimation accuracy is reduced. BSC6900 V900R011 Radio
None
None
None
None
If this parameter is set to a greater value, the accuracy of interference assessment in the IBCA algorithm may be reduced; if this parameter is set to a smaller value, the CPU occupancy for IBCA algorithm Versions earlier than is increased. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, the accuracy of interference assessment in the IBCA algorithm may be reduced; if this parameter is set to a smaller value, the CPU occupancy for IBCA algorithm Versions earlier than is increased. BSC6900 V900R011 Radio
None
None
None
None
None
If this parameter is set to YES, cell congestion may occur when the interference is strong.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value and consequently there is a small number of requests for SDCCHs, the SDCCHs of a cell are in idle state and the TCH traffic volume during busy time is decreased. if this parameter is set to a smaller value and consequently there is a large number of requests for SDCCHs, the requests cannot be met and the access Versions earlier than success rate is decreased. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, the call-completion rate of MS increases but the BSC6900 load may also increase. If this parameter is set to a smaller value, the increase of the call completion rate is Versions earlier than not obvious. BSC6900 V900R011 Radio
If this parameter is set to a greater value, the call-completion rate of MS increases but the BSC6900 load may also increase. If this parameter is set to a smaller value, the increase of the call completion rate is Versions earlier than not obvious. BSC6900 V900R011 Radio
If this parameter is set to YES, the call completion rate of the MS increases but the BSC6900 load also increases.
None
None
None
If this parameter is set to a smaller value, the channel load may increase and the Versions earlier than access success rate may decrease. BSC6900 V900R011 Radio
None
None
If this parameter is set to a greater value, channel resources may be wasted, thus causing congestion. If this parameter is set to a smaller value, the handover Versions earlier than success rate may decrease. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment
None
If this parameter is set to a greater value, the traffic volume during busy time may be decreased. If this parameter is set to a smaller value, Versions earlier than the voice quality may be decreased. BSC6900 V900R011 Radio
If this parameter is set to a greater value, the traffic volume during busy time may be decreased. If this parameter is set to a smaller value, Versions earlier than the voice quality may be decreased. BSC6900 V900R011 Radio
If the value of this parameter is set too high, the power load of other timeslots or Versions earlier than cells is burdened. BSC6900 V900R011 Equipment
The setting of this parameter affects the MOS. When the C/I ratio is satisfactory, the coding scheme of higher rate is recommended; otherwise, the coding Versions earlier than scheme of lower rate is recommended. BSC6900 V900R011 Radio
The setting of this parameter affects the MOS. When the C/I ratio is satisfactory, the coding scheme of higher rate is recommended; otherwise, the coding Versions earlier than scheme of lower rate is recommended. BSC6900 V900R011 Radio
The setting of this parameter affects the MOS. When the C/I ratio is satisfactory, the coding scheme of higher rate is recommended; otherwise, the coding scheme of lower rate is recommended. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
If this parameter is set to a greater value, congestion may occur in the underlaid subcell in a short time; if this parameter is set to a smaller value, congestion in the overlaid subcell is difficult to be Versions earlier than relieved. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, call drops may occur. If this parameter is set to a smaller value, handover may be performed frequently and the signaling load in the cell is Versions earlier than increased. BSC6900 V900R011 Radio
If this parameter is set to a greater value, unnecessary handovers may be performed. If this parameter is set to a smaller value, the handover cannot be performed in time, thus the voice quality is decreased Versions earlier than or call drops may occur. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
If this parameter is set to a relatively small value, the calls with low receive level are handed over to other cells. Thus, the handover success rate is decreased.
If this parameter is set to a relatively great value, congestion occurs to interRAT neighboring cells in a short time. If this parameter is set to a relatively small value, the congestion in the current cell cannot be solved. BSC6900 V900R011 Radio
If this parameter is set to a relatively great value, congestion occurs to interRAT neighboring cells in a short time. If this parameter is set to a relatively small value, the congestion in the current cell cannot be solved. BSC6900 V900R011 Radio
If this parameter is set to a relatively small value, the calls with low receive level are handed over to other cells. Thus, the handover success rate is decreased.
None
None
None
None
None
None
If this parameter is set to a greater value, congestion may occur in the underlaid subcell; If this parameter is set to a smaller value, handover success rate may be Versions earlier than decreased. BSC6900 V900R011 Radio
None
If this timer is set to a greater value, channel resources may be wasted, thus causing congestion. If this timer is set to a smaller value, the handover success rate may decrease.
None
None
If this timer is set to a greater value, channel resources may be wasted, thus causing congestion. If this timer is set to a smaller value, the handover success rate may decrease.
None
If this parameter is set to a relatively great value, the congestion in the current cell cannot be solved. If this parameter is set to a relatively small value, the calls with low receive level are handed over to other cells. Thus, the handover success rate is decreased. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment
None
None
None
None
None
Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport
None
None
Not involved
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
This parameter adjusts traffic distribution.
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, congestion may occur in the macro subcell; If this parameter is set to a smaller value, unnecessary handovers may be performed, thus the voice quality is decreased and ping-pong handovers Versions earlier than may be performed. BSC6900 V900R011 Radio
If this parameter is set to a greater value, unnecessary handovers may be performed, thus the voice quality is decreased and ping-pong handover may occur. If this parameter is set to a smaller value, congestion may occur in the macro Versions earlier than subcell. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a too small value, the corresponding cell may reject some handover requests; thus the traffic congestion on the neighboring cells with heavy traffic cannot be relieved. If this parameter is set to a too great value, the corresponding cell may be Versions earlier than overloaded. BSC6900 V900R011 Radio
None
None
None
None
None
None
If this parameter is set to a greater value, it is difficult for the MS to be handed over to the serving cell, thus leading to call drop when there is no suitable neighboring cell. If this parameter is set to a smaller value, the MS is likely to be handed over to the serving cell again, thus leading to ping- Versions earlier than pong handovers. BSC6900 V900R011 Radio
If this parameter is set to a greater value, it is difficult for the MS to be handed over to the serving cell, thus leading to call drop when there is no suitable neighboring cell. If this parameter is set to a smaller value, the MS is likely to be handed over to the serving cell again, thus leading to ping- Versions earlier than pong handovers. BSC6900 V900R011 Radio
None
If this parameter is set to a greater value, congestion may occur in the neighboring cells in a short time; if this parameter is set to a smaller value, congestion in the Versions earlier than serving cell is difficult to be relieved. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Transport
None
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
When this parameter is set to "ON" and the level of the channel request received by the BSC6900 is low, the BSC6900 assigns only an underlaid channel to the MS. In the case of heavy traffic, this may lead to congestion in the underlaid subcell but can prevent call drops due to the excessively low level when the MS Versions earlier than accesses an overlaid channel. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
Not involved
None
None
When this parameter is set to YES, the network KPIs may be deteriorated.
When this parameter is set to YES, the network KPIs may be deteriorated.
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a smaller value, call drops may occur due to delayed power control; if this parameter is set to a greater value, the power control may be performed excessively, thus leading to Versions earlier than ping-pong power control. BSC6900 V900R011 Radio
None
None
If this parameter is set to a smaller value, call drops may occur or voice quality may be decreased due to delayed handover; if this parameter is set to a greater value, unnecessary handover may be Versions earlier than performed. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a smaller value, the algorithm cannot realize fast power control. If this parameter is set to a greater value, the power control may be performed excessively, thus leading to poor quality, low level, and ping-pong Versions earlier than power control.. BSC6900 V900R011 Radio
None
None
None
If this parameter is set to a smaller value, the call drop rate may increase; if this parameter is set to a greater value, the Versions earlier than speech quality may be affected. BSC6900 V900R011 Radio
None
None
None
If this parameter is set to a smaller value, call drops may occur due to delayed power control; if this parameter is set to a greater value, the power control may be performed excessively, thus leading to Versions earlier than ping-pong power control. BSC6900 V900R011 Radio
None
None
Versions earlier than None BSC6900 V900R011 Transport In a multi-band network, this parameter can be set on the basis of the traffic volume on each frequency band. If this parameter is set to 0, the MS reports the measurement results of six neighboring cells known and permitted by the NCC at the bands with the best signal regardless of the band at which the neighboring cell is located. If this parameter is set to 1, the MS reports the measurement result of a neighboring cell known and permitted by the NCC at each band with the best signal (the band serving the current cell not included). The MS reports the measurement result of the neighboring cell at the band serving the current cell in the redundant position. If the redundant position is still available, the MS reports the measurement results of other neighboring cells regardless of the bands at which the neighboring cells are located. If this parameter is set to 2, the MS reports the measurement results of two neighboring cell known and permitted by the NCC at each band with the best signal (the band serving the current cell not included). The MS reports the measurement result of the neighbor cell at the band serving the current cell in the redundant position. If the redundant position is still available, the MS reports Versions earlier than the measurement results of other BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
In scenarios with heavy traffic, the network performance can be improved if this switch is turned on. BSC6900 V900R011 Radio
None
None
Not involved
None
Not involved
None
None
None
None
Not involved
None
None
None
None
None
This parameter is used to limit the number of candidate cells for handovers. If this parameter is set to a greater value, some desired cells may be excluded from the candidate cells, thus leading to call drops. If this parameter is set to a smaller value, an unwanted cell may become a candidate cell, thus leading to handover Versions earlier than failures. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a smaller value, the idle state of the current SDCCHs cannot be indicated correctly and consequently the rollback of SDCCHs immediately triggers adjustment and affects the access success rate. If this parameter is set to a larger value, the channel allocation algorithm becomes less sensitive and consequently the SDCCHs stay in idle state and cannot be rolled back for a long period of time, thus affecting the Versions earlier than TCH traffic volume. BSC6900 V900R011 Radio
If this parameter is set to a greater value, some desired cells may be excluded from the candidate cells, thus leading to call drops. If this parameter is set to a smaller value, an unwanted cell may become a candidate cell, thus leading to handover Versions earlier than failures. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
Not involved
None
None
None
If the value of this parameter is set too high, the RSL congestion is likely to occur.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None If this timer is set to a greater value, the radio resources are occupied for a too long time, thus affecting the channel resource usage. If this timer is set to a smaller value, the call reestablishment success rate decreases.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
This parameter should be set as required: In the areas where the traffic volume is low, this parameter can be set to 4 or 7 to improve the success rate of MS access. In the areas where congestion occurs or in the micro cells where the traffic volume is high, it is Versions earlier than recommended this parameter be set to 1. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Transport
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Only the BTS3X in G3BTS32.30000.04.1130 or later and the double-transceiver BTSs support the LAPDm N200 parameter. If this parameter is set to Yes, the BSC6900 sends the LAPDm N200 parameter. If this parameter is set to OFF, the BSC6900 does not send the LAPDm N200 parameter. If a BTS does not support this parameter, the parameter should be set to No. Otherwise, the BTS cannot be Versions earlier than initialized. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Transport
None
None
None
None
None
None
None
None
None
None
None
None
None
None
When this parameter is set to ENABLE, the MOS can be increased in a call between MSs.
None
None
None
None
None
None
None
None
None
BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
Versions earlier than None BSC6900 V900R011 Radio The most significant three bits of BSIC for all cells map with the NCC. NCC Permitted should be set properly to avoid too many call drops. The MS does not report the information on the neighboring cells in the network whose corresponding NCC bit is set to 0. Thus, this parameter should be set properly. Otherwise, an MS during an ongoing call cannot perform normal handover and a crosscoverage call drop occurs. For details, see GSM Rec. 05. 08. During an ongoing call, the MS reports to the BTS the signal information on neighboring cells. A report covers a maximum of six cells. Thus, the MS should report those possible target cells, rather than selecting cells only based on the signal level. Generally, the MS does not report the information on the cells belonging to other GSM PLMNs. This function enables the MS to measure only those specified cells. This parameter specifies the codes of the NCCs to be measured by the MS. On the SCH, the system constantly transmits the BSIC, the first three bits of which indicate the NCC. Thus, the MS needs to compare only this parameter with the adjacent NCCs measured. Then, the MS reports the matched NCCs to the BTS and discards others. The setting of this parameter affects only Versions earlier than those MSs during conversation, as well BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a smaller value, handovers are performed frequently; if this parameter is set to a greater value, handovers cannot be performed timely, Versions earlier than thus leading to call drops. BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment
None
None
None
None
None
None
None
None
None
None
None
None
Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to YES, FR calls can be switched into HR calls to relieve the network congestion, but the voice quality is decreased; if this parameter is set to NO, FR calls cannot be switched into HR calls, that is, network congestion cannot be relieved through the handover Versions earlier than from TCHF to TCHH. BSC6900 V900R011 Radio
If this parameter is set to a greater value, the handover margin is increased in a short period and many MSs are handed over from TCHF to TCHH, thus affecting the voice quality. If this parameter is set to a smaller value, the handover margin is enlarged slowly and it takes a long time to initiate a TCHF-TCHH handover. Thus, the network congestion cannot be relieved in Versions earlier than time. BSC6900 V900R011 Radio
If this parameter is set to a greater value, only MSs in the center of the cell can meet the handover condition. Thus, the network congestion cannot be relieved in time. If this parameter is set to a smaller value, MSs at the edge of the cell can also meet the handover condition, thus Versions earlier than affecting the voice quality. BSC6900 V900R011 Radio
If this parameter is set to a greater value, MSs at the edge of the cell can also meet the handover condition, thus affecting the voice quality. If this parameter is set to a smaller value, only MSs in the center of the cell can meet the handover condition. Thus, the network congestion cannot be relieved in Versions earlier than time. BSC6900 V900R011 Radio
If this parameter is set to a greater value, MSs with poor quality can also meet the handover condition, thus affecting the voice quality. If this parameter is set to a smaller value, little MSs can meet the handover condition. Thus, the network congestion Versions earlier than cannot be relieved in time. BSC6900 V900R011 Radio
If this parameter is set to a greater value, the calls cannot be handed over to TCHH in a short period when the traffic volume is increased greatly. Thus, the network congestion cannot be relieved in time. If this parameter is set to a smaller value, calls are handed over to TCHH unnecessarily, thus causing MOS loss of Versions earlier than the customer. BSC6900 V900R011 Radio
If this parameter is set to a greater value, only MSs in the center of the cell use the TCHH, thus leading to timeslot waste and the network congestion cannot be relieved in time. If this parameter is set to a smaller value, MSs at the edge of the cell and with poor quality also cannot be handed over to the TCHF, thus affecting Versions earlier than the voice quality. BSC6900 V900R011 Radio
If this parameter is set to a greater value, MSs at the edge of the cell and with poor quality also cannot be handed over to the TCHF, thus affecting the voice quality. If this parameter is set to a smaller value, only MSs in the center of the cell use the TCHH, thus leading to timeslot waste and the network congestion cannot be Versions earlier than relieved in time. BSC6900 V900R011 Radio
None
If this parameter is set to a greater value, handover cannot be triggered even when the quality is poor, thus affecting the voice quality; if this parameter is set to a smaller value, handover is triggered even when the quality is good, thus the network congestion cannot be relieved in Versions earlier than time. BSC6900 V900R011 Radio
If this parameter is set to a smaller value, calls are handed over to TCHH unnecessarily, thus causing MOS loss of the customer; if this parameter is set to a greater value, TCHF-TCHH handover is performed only when the traffic volume is high, thus network congestion may Versions earlier than occur. BSC6900 V900R011 Radio
None
None
None
The handover decision is allowed only when the uplink receive quality is greater than or equal to the value of this parameter. Therefore, if this parameter is set to a greater value, the handovers due to no-downlink measurement report Versions earlier than cannot be triggered. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
This parameter should be set to a small value because the signaling channel seizure duration is shorter than the traffic Versions earlier than channel seizure duration for the MS. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, congestion may occur in the underlaid subcell; if this parameter is set to a smaller value, assignment success rate Versions earlier than may be decreased. BSC6900 V900R011 Radio
If this parameter is set to a greater value, assignment success rate may be decreased; if this parameter is set to a smaller value, congestion may occur in Versions earlier than the underlaid subcell. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, congestion may occur in the overlaid subcell; if this parameter is set to a smaller value, congestion may occur in Versions earlier than the underlaid subcell. BSC6900 V900R011 Radio
If the value of this parameter is set too small, frequent handovers are likely to occur.
If this parameter is set to a greater value, congestion may occur in the overlaid subcell; if this parameter is set to a smaller value, congestion may occur in Versions earlier than the underlaid subcell. BSC6900 V900R011 Radio
None
If this parameter is set to a greater value, congestion may occur in the overlaid subcell in a short time; if this parameter is set to a smaller value, congestion in the underlaid subcell is difficult to be Versions earlier than relieved. BSC6900 V900R011 Radio
If this parameter is set to a greater value, congestion in the underlaid subcell is difficult to be relieved; if this parameter is set to a smaller value, congestion may occur in the overlaid subcell in a short Versions earlier than time. BSC6900 V900R011 Radio If this parameter is set to a greater value, congestion may occur in the overlaid subcell in a short time; if this parameter is set to a smaller value, congestion in the underlaid subcell is difficult to be Versions earlier than relieved. BSC6900 V900R011 Radio
If this parameter is set to a greater value, congestion may occur in the underlaid subcell; if this parameter is set to a smaller value, congestion may occur in Versions earlier than the overlaid subcell. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, congestion may occur in the underlaid subcell; if this parameter is set to a smaller value, congestion may occur in the overlaid subcell. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a smaller value, the BTS frequently reports overload indication messages to the BSC6900. As a result, the BSC6900 frequently reports overload indication messages to the MSC and thus the MSC may initiate flow control. If this parameter is set to a greater value, the BTS sends overload indication messages to the BSC6900 only when a large number of MSs access the network and when the system resources are insufficient. Therefore, the access requests on the RACH and all the messages on the PCH are Versions earlier than discarded. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
Properly setting this parameter can increase the paging success rate. If this parameter is set to a greater value, paging overload may occur and the paging success rate may decrease.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, unnecessary handovers may be performed; if this parameter is set to a smaller value, handovers may not be performed in time and call drops may Versions earlier than occur. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, the target cell for the previous handover will not be selected for the next handover, but the probability of call drop increases. If this parameter is set to a smaller value, the probability of handover Versions earlier than failure increases. BSC6900 V900R011 Radio
None
None
None
None
None
If this parameter is set to "YES", the user with high QoS requirement may occupy a great number of PS resources. In this case, the remaining resources for other users reduce. As a result, the KPIs for Versions earlier than these users become bad. BSC6900 V900R011 Equipment
None
None
If this parameter is set to a lower value, the paging success rate may decrease.
None
None
None
The MS calculates C1 and C2 of the serving cell at a minimum interval of 5s. When necessary, the MS re-calculates C1 and C2 of all non-serving cells (neighboring cells). The MS constantly checks whether a cell reselection is required by checking following conditions: Whether the path loss (C1) of the current serving cell drops below 0 within 5s. If yes, the path loss is too large. C2 of an appropriate non-serving cell exceeds that of the serving cell in 5s and the following conditions are met: The C2 of a new cell in another LAC minus CRH (broadcast in the system information 3 and 4 of the serving cell) exceeds C2 of the serving cell in 5s. A cell reselection is performed in the last 15s, and the C2 of the new cell minus 5 dB constantly exceeds the C2 of the serving cell in 5s. A better cell exists if the above conditions are met. If a better cell exists, the MS reselects a cell, and does not Versions earlier than select the previous cell within 5s. BSC6900 V900R011 Radio
None
None
None
Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment
None
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
Not involved
None
None
None
Not involved
None
None
Not involved
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to "YES", the delay caused by cell reselection decreases.
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, the call drop rate decreases but the traffic volume and paging success rate Versions earlier than are affected. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The setting of this parameter affects the Versions earlier than GSM Phase II MS. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If the value of this parameter is set inappropriately high or small, the BTS cabinet top output power is inconsistent with the TRX output power.
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, unnecessary handovers between micro cells are performed, thus affecting the voice quality. If this parameter is set to a smaller value, congestion may occur in Versions earlier than macro cells. BSC6900 V900R011 Radio
None
If this parameter is set to a greater value, congestion may occur in macro cells. If this parameter is set to a smaller value, unnecessary handovers between micro cells are performed, thus affecting the Versions earlier than voice quality. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
If this parameter is set to a greater value, downlink power insufficiency may not be solved in time, thus leading to call drops. If this parameter is set to a smaller value, unnecessary handovers may be performed, thus the voice quality is Versions earlier than decreased. BSC6900 V900R011 Radio
If this parameter is set to a greater value, unnecessary handovers may be performed, thus the voice quality is decreased. If this parameter is set to a smaller value, downlink power insufficiency may not be Versions earlier than solved in time, thus leading to call drops. BSC6900 V900R011 Radio
None
None
None
If this parameter is set to a smaller value, the algorithm cannot realize fast power control. If this parameter is set to a greater value, the power control may be performed excessively, thus leading to poor quality, low level, and ping-pong Versions earlier than power control. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a smaller value, the random access success rate may Versions earlier than decrease. BSC6900 V900R011 Radio
If this parameter is set to a smaller value, the BTS frequently sends the overload messages to the BSC6900. Thus, the system resource usage decreases and MSs are difficult to access the network. If this parameter is set to a greater value, the BTS sends an overload message to the BSC6900 at a long interval. Thus, Versions earlier than system faults may occur. BSC6900 V900R011 Radio
None
None
None
If this parameter is set to a smaller value, the allowable error rate for the random access signal is high and an MS can easily access the network; however, the error report rate is high. If this parameter is set to a greater value, the error report rate of the MS is low but the MS cannot Versions earlier than easily access the network. BSC6900 V900R011 Radio
None
None
None
When this parameter is set to on, the MOS of a MS-initiated and MSterminated call is improved.
None
None
None
None
None
None
None
None
If this parameter is set to YES, the BSC6900 initiates a reassignment when receiving an assignment failure message over the Um interface. This helps increase the call completion rate and improve the QoS of the network. The successful reassignment, however, results in an increase in the access delay Versions earlier than of MSs and the load of the BSC6900. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, too many channels may be reserved for the users with high priority, and the users with low priority may be failed to access channels. If this parameter is set to a smaller value, channels reserved for the users with high priority may be Versions earlier than insufficient. BSC6900 V900R011 Radio
None
If this parameter is set to a smaller value, the radio resource status is reported too frequently, thus increasing the load of the BSC6900. If this parameter is set to a greater value, the radio resource status is not immediately reported and thus the BSC6900 cannot handle the interference Versions earlier than to the BTS in time. BSC6900 V900R011 Radio
None
None
None
None
None
If this parameter is set to a smaller value, the radio link is vulnerable to failure, thus call drops are likely to occur. If this parameter is set to a greater value, the MS may not release the connection for a long time, thus decreasing the resource usage. The parameter is valid Versions earlier than in the downlink. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, some desired cells may be excluded from the candidate cells, thus leading to call drops. If this parameter is set to a smaller value, an unwanted cell may become a candidate cell, thus leading to handover Versions earlier than failures. BSC6900 V900R011 Radio
None
Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment
None
None
None
None
None
None
None
None
When this parameter is set to on, the MOS of a MS-initiated and MSterminated call is improved.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this switch is set to ON, the call access delay may be prolonged, but the performance of the algorithms in which the SDCCH MRs are used are enhanced. BSC6900 V900R011 Radio
The greater the value of this parameter is, the longer the call access duration is, the MRs are filtered more completely. Generally, you are advised to set this parameter to a value smaller than 20. BSC6900 V900R011 Radio
None
None
None
None
None
None
If this function is enabled after encryption is enabled, the network security can be Versions earlier than improved. BSC6900 V900R011 Radio
The TRX is shut down automatically, and Versions earlier than the capacity of the cell is decreased. BSC6900 V900R011 Equipment
If this parameter is set to a greater value, the handover cannot be performed in time and call drops may occur. If this parameter is set to a smaller value, unexpected handovers may be performed due to incorrect MR when the call is initially set up, thus affecting Versions earlier than handover success rate. BSC6900 V900R011 Radio
None
If this parameter is set to a greater value, the handover to micro cells becomes difficult, and congestion may occur in macro cells. If this parameter is set to a smaller value, unnecessary handovers are performed, thus affecting the voice Versions earlier than quality. BSC6900 V900R011 Radio
If this parameter is set to a greater value, the handover to micro cells becomes difficult, and congestion may occur in macro cells. If this parameter is set to a smaller value, unnecessary handovers are performed, thus affecting the voice Versions earlier than quality. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
When the neighboring 3G cell is configured and the inter-system cell reselection is enabled, the MS cannot receive the 2Quater message and thus cannot be reselected to the neighboring Versions earlier than 3G cell if this parameter is set to NO. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
This parameter can be used to control network load based on the MS access classes, thus preventing some MSs from accessing the network. It is recommended that this parameter be not Versions earlier than used. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, the handover to micro cells becomes difficult, and congestion may occur in macro cells. If this parameter is set to a smaller value, more handovers may be performed, thus Versions earlier than the voice quality is decreased. BSC6900 V900R011 Radio
If this parameter is set to a greater value, the handover to micro cells becomes difficult, and congestion may occur in macro cells. If this parameter is set to a smaller value, more handovers may be performed, thus Versions earlier than the voice quality is decreased. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Radio
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, it is difficult for the MS to be handed over to the original cell, thus leading to call drop when there is no suitable neighboring cell. If this parameter is set to a smaller value, the MS is likely to be handed over to the original cell again, Versions earlier than thus leading to ping-pong handovers. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Versions earlier than BSC6900 V900R011 Transport Versions earlier than BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment Versions earlier than BSC6900 V900R011 Equipment
None
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If timer T200 is set to a smaller value, the transmit end may mistakenly regard that the link is faulty and the data transmission fails before the transmit end receives a response from the peer end. If timer N200 is set to a smaller value, the number of data retransmissions is reduced and the success rate of transmission is reduced. If timers T200 and N200 are set to greater values, the channels are seized all along when the link is faulty. Thus, resources are Versions earlier than wasted. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a smaller value, the paging success rate increases but the load on the SDCCH also increases, Versions earlier than thus causing congestion on the SDCCH. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, the handover cannot be performed in time and call drops may occur. If this parameter is set to a smaller value, the coverage area of the cell is reduced, and the traffic volume on the cell may be Versions earlier than decreased. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, network congestion may occur in the cell; if this parameter is set to a smaller value, TCHHs are allocated even when the traffic volume on the cell is light, this Versions earlier than affects the voice quality. BSC6900 V900R011 Radio
When this parameter is set to a large value, the values of the new counters TCH call drops (DL FER) and TCH call drops (UL FER and DL FER) are reduced. When this parameter is set to a small value, the values of the two counters are increased. The overall number of call drops, however, remains unchanged and the performance of other counters is not affected. BSC6900 V900R011 Radio
When this parameter is set to a large value, the values of the new counters TCH call drops (DL receive level) and TCH call drops (UL receive level) are increased. When this parameter is set to a small value, the values of the two counters are reduced. The overall number of call drops, however, remains unchanged and the performance of other counters is not affected. BSC6900 V900R011 Radio
When this parameter is set to a large value, the values of the new counters TCH call drops (DL receive quality) and TCH call drops (UL receive quality and DL receive quality) are reduced. When this parameter is set to a small value, the values of the two counters are increased. The overall number of call drops, however, remains unchanged and the performance of other counters is not affected. BSC6900 V900R011 Radio
When this parameter is set to a large value, the values of the new counters TCH call drops (UL FER) and TCH call drops (UL FER and DL FER) are reduced. When this parameter is set to a small value, the values of the two counters are increased. The overall number of call drops, however, remains unchanged and the performance of other counters is not affected. BSC6900 V900R011 Radio
When this parameter is set to a large value, the values of the new counters TCH call drops (UL receive level) and TCH call drops (UL receive level and DL receive level) are increased. When this parameter is set to a small value, the values of the two counters are reduced. The overall number of call drops, however, remains unchanged and the performance of other counters is not affected. BSC6900 V900R011 Radio
When this parameter is set to a large value, the values of the new counters TCH call drops (UL receive quality) and TCH call drops (UL receive quality and DL receive quality) are reduced. When this parameter is set to a small value, the values of the two counters are increased. The overall number of call drops, however, remains unchanged and the performance of other counters is not affected. BSC6900 V900R011 Radio
If this parameter is set to a greater value, the handover cannot be performed in time and call drops may occur. If this parameter is set to a smaller value, unexpected handovers may be performed due to incorrect MR when the call is initially set up, thus affecting Versions earlier than handover success rate. BSC6900 V900R011 Radio
None
None
If this parameter is set to a smaller value, Versions earlier than the handover frequency is higher. BSC6900 V900R011 Radio
If this parameter is set to ON, the calls are handed over on schedule. This increases the load of the BSC6900 but improves the network security.
If this parameter is set to a greater value, the half-rate channels are assigned to the MS only when the channel seizure ratio of underlaid subcell is very high. Insufficient half-rate channels can be assigned to the MS. Thus, the capacity of the BSC is reduced. If this parameter is set to a smaller value, the half-rate channels are assigned to the MS only when the channel seizure ratio of underlaid subcell is very low. The calls use the half-rate channel even if there are enough full-rate channels, Versions earlier than which influences the voice quality. BSC6900 V900R011 Radio
If this parameter is set to a greater value, the half-rate channels are assigned to the MS only when the channel seizure ratio of overlaid subcell is very high. Insufficient half-rate channels can be assigned to the MS. Thus, the capacity of the BSC is reduced. If this parameter is set to a smaller value, the half-rate channels are assigned to the MS only when the channel seizure ratio of overlaid subcell is very low. The calls use the half-rate channel even if there are enough full-rate channels, Versions earlier than which influences the voice quality. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If both TFO and AEC functions are enabled and the acoustic echo is detected, the TFO is disabled to cancel the echo so that the speech quality can be improved.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, the BCCH may idle while non-BCCHs are congested, thus affecting the traffic volume during busy times. If this parameter is set to a smaller value, the assignment of the BCCH may fail, and thus the access success rate may Versions earlier than be decreased. BSC6900 V900R011 Radio
If this parameter is set to a greater value, the assignment of the BCCH may fail, and thus the handover success rate may be decreased. If this parameter is set to a smaller value, the BCCH may idle while non-BCCHs are congested, thus affecting the traffic Versions earlier than volume during busy times. BSC6900 V900R011 Radio
If this parameter is set to a greater value, the BCCH may idle while non-BCCHs are congested, thus affecting the traffic volume during busy times and the access success rate. If this parameter is set to a smaller value, unnecessary handovers may be performed, thus the voice quality is decreased. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, cell congestion may be difficult to be relieved, thus affecting the traffic volume during busy times and the access success rate. If this parameter is set to a smaller value, handover success rate Versions earlier than may be decreased. BSC6900 V900R011 Radio
If this parameter is set to a greater value, call drop rate may be increased and congestion may occur in the overlaid subcell; if this parameter is set to a smaller value, handover success rate Versions earlier than may be decreased. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
If this parameter is set to a greater value, congestion may occur in the underlaid subcell; if this parameter is set to a smaller value, handover success rate Versions earlier than may be decreased. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
When this parameter is enabled, the fast flux monitoing frequency is increased, and the channel allocation can be adjusted more quickly to adapt to the service type. Thus, the terminal throughput and BSC PS resource usage can be increased. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If the number of RACH conflicts in a cell is small, T should be set to a great value. If the number of RACH conflicts in a cell is large, T should be set to a small value. The increase in T and S prolongs the access time of an MS, thus affecting the access performance of the whole network. Therefore, appropriate values should be selected for T and S. When the network traffic is heavy, the success rate of immediate assignment is low if the sum of S and T is low. Thus, the value of T should be properly adjusted to make the sum of S and T Versions earlier than great. BSC6900 V900R011 Radio
The parameter modification impacts the covered range of cell.
BSC6900 V900R011 Radio Versions earlier than BSC6900 V900R011 Transport
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If the parameter is set to a relatively great value, down power adjustment may not be performed when the uplink quality is good, thus causing power waste and increasing the interference. If this parameter is set to a relatively small value, down power adjustment may be performed when the uplink quality is Versions earlier than poor. In this case, call drops may occur. BSC6900 V900R011 Radio
If the parameter is set to a relatively great value, up power adjustment may be performed when the uplink quality is good, thus causing power waste and increasing the interference. If this parameter is set to a relatively small value, up power adjustment may not be performed when the uplink quality is poor. In this case, call drops may occur.
If this parameter is set to a greater value, unnecessary handovers may be performed. If this parameter is set to a smaller value, the handover cannot be performed in Versions earlier than time and call drops may occur. BSC6900 V900R011 Radio
None
None
None
If this parameter is set to a smaller value, call drops may occur due to delayed handover; if this parameter is set to a greater value, unnecessary handover may be performed, thus affecting the Versions earlier than voice quality. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a relatively small value, the fast power control on the uplink cannot be implemented. If this parameter is set to a relatively great value, the power control may be performed excessively on the uplink, thus leading to poor quality, low level, Versions earlier than and ping-pong power control. BSC6900 V900R011 Radio
If this parameter is set to a relatively small value, call drops may occur due to delayed power control in the uplink. If this parameter is set to a relatively great value, the power control may be performed excessively on the uplink, Versions earlier than thus leading to ping-pong power control. BSC6900 V900R011 Radio
None
None
If this parameter is set to a smaller value, downward power control is not performed when the signal quality is good, thus causing power waste and increasing the interference. If this parameter is set to a greater value, downward power control is performed even though the signal quality Versions earlier than is bad, thus affecting the speech quality. BSC6900 V900R011 Radio
If this parameter is set to a greater value, upward power control may not be performed when the voice quality is bad, thus affecting the voice quality. If this parameter is set to a smaller value, upward power control may be performed when the voice quality is good, thus causing the power waste and increasing Versions earlier than the interference. BSC6900 V900R011 Radio
None
None
None
If this parameter is set to a greater value, handover may not be performed when the uplink voice quality is bad, thus leading to call drops. If this parameter is set to a smaller value, unnecessary handovers may be performed, thus Versions earlier than affecting the voice quality. BSC6900 V900R011 Radio
If this parameter is set to a smaller value, the handovers due to bad uplink quality may increase, thus decreasing the handover success rate. If this parameter is set to a greater value, handovers due to bad uplink quality are less possible to Versions earlier than occur, thus increasing the call drop rate. BSC6900 V900R011 Radio
If this parameter is set to a smaller value, the handovers due to bad uplink quality may increase, thus decreasing the handover success rate. If this parameter is set to a greater value, handovers due to bad uplink quality are less possible to Versions earlier than occur, thus increasing the call drop rate. BSC6900 V900R011 Radio
None
None
If this parameter is set to a greater value, downward power control may not be performed when the voice quality is good, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, downward power control may be performed when the voice quality is bad, Versions earlier than thus affecting the voice quality. BSC6900 V900R011 Radio
If this parameter is set to a greater value, upward power control may be performed when the voice quality is good, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, upward power control may not be performed when the voice quality is bad, thus affecting the voice Versions earlier than quality. BSC6900 V900R011 Radio
None
None
None
None
None
None
If this parameter is set to a greater value, downward power control may not be performed when the voice quality is good, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, downward power control may be performed when the voice quality is bad, Versions earlier than thus affecting the voice quality. BSC6900 V900R011 Radio If this parameter is set to a greater value, upward power control may be performed when the voice quality is good, thus causing the power waste and increasing the interference. If this parameter is set to a smaller value, upward power control may not be performed when the voice quality is bad, thus affecting the voice Versions earlier than quality. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, the handover cannot be performed in time and call drops may occur. If this parameter is set to a smaller value, unnecessary handovers may be performed, thus affecting the voice Versions earlier than quality. BSC6900 V900R011 Radio
None
If this parameter is set to a greater value, unnecessary handovers may be performed, thus affecting the voice quality. If this parameter is set to a smaller value, the handover cannot be performed in Versions earlier than time and call drops may occur. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, congestion may occur in the underlaid subcell. If this parameter is set to a smaller value, Versions earlier than ping-pong handovers may occur. BSC6900 V900R011 Radio
None
None
If this parameter is set to a greater value, congestion in the underlaid subcell is difficult to be relieved; if this parameter is set to a smaller value, congestion may occur in the overlaid subcell in a short Versions earlier than time. BSC6900 V900R011 Radio
If this parameter is set to a greater value, congestion may occur in the overlaid subcell in a short time; if this parameter is set to a smaller value, congestion in the underlaid subcell is difficult to be Versions earlier than relieved. BSC6900 V900R011 Radio
None
None
If this parameter is set to a high value and the VGCS has priority, public network services are likely to suffer from insufficient channels. Thus, this parameter needs to be set according to the actual service requirements. BSC6900 V900R011 Radio
When preemption conditions are met, public network services can preempt channels of the VGCS if this parameter is set to Public Network First; the VGCS can preempt channels of public network services if this parameter is set to VGCS First. BSC6900 V900R011 Radio
If this parameter is set to a high value and the VGCS has priority, public network services are likely to suffer from insufficient channels. Thus, this parameter needs to be set according to the actual service requirements. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If this parameter is set to a greater value, channel resources may be wasted, thus Versions earlier than causing congestion. BSC6900 V900R011 Radio
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None

Para List For GSM

Uploaded by

Copyright:

Available Formats

Para List For GSM

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Para List For GSM

Uploaded by

Copyright:

Available Formats

BSC6900 GSM V900R011C00 Parameter Reference

Huawei Technologies Co., Ltd.

Copyright Huawei Technologies Co., Ltd. 2010. All rights reserved.

Trademarks and Permissions

out prior written consent of Huawei Technologies Co., Ltd.

Parameter ID Parameter Name

MML Command Meaning

Downlink Quality Threshold in ABCDownQu Assigning Better ality Cell BSC6900

Uplink Quality Threshold in ABCUpQualit Assigning Better y Cell

Maximum Better ABCWaitMax Cell Assigning Time Duration

ABISBYPAS Abis ByPass SMODE Mode

SDCCH Congestion Flow Control Allowed BSC6900

AbisFCTimer Abis Flow Control 1 Timer 1 BSC6900

AbisFCTimer Abis Flow Control 2 Timer 2 BSC6900

ABISIDLETS Abis Idle TS ALLOC Allocate Strategy BSC6900

ABISIDLETS Abis Idle TS CFGSWITCH Configure Switch BSC6900

ABISRESAD JTCHHFUNS TCHH Function W Switch

Timer of ABISTSFRE Releasing Abis ETM Timeslot

Abis Interface Tag

Duration of BTS ABLASTTIM Collecting AB[100 E Millisecond] BSC6900

AbnormalMos Abnormal Voice Threshold MOS Threshold

SET OTHSOFTPAR A(Optional)

Access Burst Type

ACCCONTR Access Control OLCLASS Class

Access Control ACCCTRLEN Allowed

Access Control ACCCTRLPY Policy

Incoming-to-BSC ACCESSOP HO Optimum TILAY Layer BSC6900

Access Control Policy Index

AccStaServic PS Initial Access eType Service Type BSC6900

Starting Point of the Access Control Window

Access Control Window Size

Sliding Speed of the Access Control Window

Address and control field compress

Support Address and Control Field Compress BSC6900

ACOOPERA A Interface TPAGINGS Paging CoWITCH ordination Switch BSC6900

Additional Reselect Parameter Indication

ACTCDSETF AMR ACS[F]

ACTCDSETH AMR ACS[H]

ACTL2REES Activate L2 ReT establishment

Valid Time of BTS Resource Activation

AC Voltage Lower Threshold BSC6900

ACVOLALAR AC Overvoltage MH Alarm Threshold

ACVOLALAR AC Undervoltage ML Alarm Threshold BSC6900

AC Voltage Upper Threshold BSC6900

ADAPTASSI Assignment GNMENTFL Procedure in IntraOW Cell HO Allowed BSC6900

Sub-Link Bandwidth Request Interval AddTransBwI When Not nt Congested

Bandwidth for Secondary Link AddTransBw When Not Num Congested

External Alarm Customer Definition Switch

Adjacent BSC ADJBSCDPC DPC

Adjustment Mode BSC6900

Support EGPRS ADJUSTULM Uplink MCS CSTYPE Dynamic Adjust

Dynamically Adjusting the Uplink MCS Coding

Auto Download Active Function Switch

Auto Download Mode

SET GTRXCHANAD MSTAT(Mandat ory)

Administrat ive state of the channel GBFD-111202 O&M of BTS

Offset Time Adjustment End Time

SoftSynchronized GBFD-118201 Network

Load Threshold of Offset Adjustment Offset Time Adjustment Switch