Leax Arkivator Telecom Catalogue 2014

CONNECTORS JUMPER CABLES
EMP & GROUNDING CABLE CLAMPS

POWER SPLITTERS & TAPPERS
COMBINERS ABSORBERS REPEATERS
ACTIVE DAS PASSIVE DAS ANTENNAS
CONTENTS
SALES OFFICE
Leax Arkivator Telecom AB
Stridsvagnsvgen 14
SE-291 39 Kristianstad, Sweden
PHONE: +46 (0) 8 752 02 20
INTRODUCTION

CONNECTORS

FEEDER & JUMPER CABLES
EMP & GROUNDING
INFO & ORDER: siteequipment@arkivator.com

WEB: www.leax.com
CABLE CLAMPS
PASSIVES
COMBINERS
Ordering products from Leax Arkivator

Telecom is easy. Orders can be placed
directly via telephone or e-mail.
Visit Leax Arkivator Telecoms website
for updated product specifications,
mounting descriptions and much more.
REPEATERS

REPEATER ANTENNAS
INDOOR ANTENNAS
While all efforts have been made to provide accurate specifications at time of printing, Leax Arkivator Telecom AB
is not responsible for any errors or omissions in this catalogue. All specifications are subject to change without prior
notice and neither Leax Arkivator Telecom AB nor its employees may be held responsible for discrepancies between
the printed specifications and those actually in effect at any given time. Please check actual specifications at www.
arkivator.se before ordering.
Leax Arkivator Telecom AB, Sweden
All rights reserved. 2014 Leax Arkivator Telecom AB.
Leax Arkivator Telecom AB P +46 8 752 02 20
siteequipment@arkivator.com
www.leax.com
Introduction and
General Information
Leax Arkivator Telecom

LEAX Arkivator Telecom AB is a global technology supplier servicing the
coaxial and RF industry in both the broadcasting and telecom sectors. Our
focus is to develop and manufacture the most innovative, dependable and
long-lasting products on the market.
Building on tradition
Our Philosophy
At LEAX Arkivator Telecom, our focus is on the development and manu-
Modern communication places great demands on the systems that pro-
facture of innovative, long-lasting RF products offering superior reli-
cess the information being exchanged throughout the world. It goes
ability and performance at a reasonable price for the worldwide market.
without saying that these systems must be built with reliable products.
Previously Teracom Components, we became Exir Telecom in 2008
When developing new technology it is of the utmost importance to un-
after becoming part of the Exir Group. Though the brand names are
derstand how this technology will be integrated into our everyday lives.
new, our products continue to be built with experience and tradition
And to understand this, we must be close to the people who use it. It is
stretching back to the first RF infrastructures to be built in Sweden.
from this perspective that we view evolving technologies. We stay close

to our customers, the universities, the technicians using our products,
Today our position on the worldwide market continues to grow stronger
and to those using our customers own innovations on a daily basis. Only
thanks to the extensive production knowledge and manufacturing ca-
with a clear understanding of the ultimate aim of the technology can we
pacity available to us as part of the Exir / Arkivator Group now owned
build the finest quality products available.
by the LEAX Group.
Trusted around the world
Where new ideas come first
At LEAX Arkivator Telecom we work together with major international
LEAX Arkivator telecom invests heavily in time and costs the develop-
operators, system suppliers and cable manufacturers who have used our
ment of new ideas and products that will improve the quality and reliabil-
products ever since the telecom boom. These companies trust the per-
ity of the worlds telecom systems. An excellent example is the first ever
formance our products deliver, and we are dedicated to maintaining their
easy-to-use, single piece connector that we introduced back in 1998, an
confidence while creating new, high quality products. The single piece
innovation that revolutionized the market. By studying problems on-site
connector and our market leading built-in weatherproofing system are
together with installers, our experienced R&D engineers excel at develop-
examples of designs that save telecom customers money while provid-
ing products that simplify installation, improve performance and enhance
ing long-term system stability.
overall system reliability.
P +46 8 752 02 20
www.leax.com
Unbeatable quality and advantages

with Exir Telecom branded components.
Having been around since long before the dawn of modern telecommunications, The Exir Telecom brand offers the benefit of farreaching experience and in-depth knowledge.
Unrivalled Industry knowledge with

LEAX Arkivator Telecom products.
As a customer you can benefit from our knowledge of sourcing
and manufacturing within the telecoms sector. LEAX Arkivator
Telecom offers the chance to establish a channel for service, good
quality and cost saving solutions.
www.leax.com
Reliable Connector Design

Design Features for Preventing Intermodulation
1
SILVER-PLATED CONTACT SURFACES
All contact surfaces are silver-plated to achieve

maximum conductivity.
HIGH CONTACT PRESSURE ON OUTER CONDUCTOR

The connectors mechanical construction allows great
pressure to be applied to the area of contact with the
cables outer conductor when tightened around the
VIBRATION RESISTANT CONSTRUCTION
cable. A specially designed slot keeps the outer
The double O-rings sealing the outer conductor
conductor of the cable in place.
provide added stability to protect against the

wear otherwise caused by cable vibrations.
O-Ring Sealing for Guaranteed Water Protection

1
AT CABLE ENTRY
O-ring at cable entry prevents water leakage between
BETWEEN CONNECTORS FRONT AND BACK PIECES

O-ring to prevent moisture migration during installation.
connector and plastic cable jacket.

2
AROUND OUTER COPPER TUBE

Double O-rings prevent leakage between connector
and outer conductor.
INSIDE THE CONNECTOR HEAD

A leaking antenna can cause damage throughout the
system. O-rings at the connector head stop such
water leakage and protect the rest of the system
from further damage.
P +46 8 752 02 20
www.leax.com
SNOW AND ICE
DUST AND SAND STORMS
HUMIDITY AND HEAVY RAIN
SALT WATER AND STRONG WINDS
HOW WE STOP WATER FROM GETTING IN

With simpler products there is a sizeable risk that water and moisture will
sealing. Our products have built-in weather protection consisting of
enter into the antenna system. This can occur in various ways, the most
O-ringsmade of EPDM. These O-rings feature completely seamless
likely of which being through poorly sealed connectors, jumper cables or
surfaces, superior workability of the sealing under extreme climatic
grounding kits.
actions and very good resistance to climatic changes, ozone and UVradiation. O-rings of this type are used in the most demanding and
External sealants do not protect against moisture that migrates within
highly critical applications including nuclear power plants, military
the feeder system. Water that collects in antenna panels or amplifiers
uses and various medical equipment.
can travel down through the system if the connector interface is not
waterproof. Should a crack or hole appear in the feeder cables plastic
As our products require no external sealing whatsoever, you will never
jacket, water will enter and travel along the outer conductor to nearby
have to worry about the unnecessary cost, time-consumption and an-
connectors. Our built-in O-ring system prevents migration of this kind
noyance of taping ever again.
from occurring inside antenna lines.
EXCEEDS IP 68
FROM THE COLDEST TO THE WARMEST
CLIMATIC CONDITIONS
The International Standards IP Protection Classification established by

IEC (International Electrotechnical Commission) provides a system for
Exir Telecom branded products are developed to withstand all climatic
specifying enclosures of electrical equipment on the basis of the de-
conditions. They have been designed primarily for the harsh Scandina-
gree of protection required. In order to be awarded IP68 classification
vian climate, made to function in the freezing cold of near Arctic winters.
a product must be able to withstand a water pressure of 0.1 bar for 30
Our products have been tested for performance in a variety of extreme
minutes. This corresponds to a depth one metre of water.
climatic conditions, from the coldest to the warmest temperatures and

at various humidity levels. They are also proven to be dust-tight and able
Exir Telecoms products for exposed situations have been successfully
to withstand the pressure of desert installation.
tested to withstand 2.5 bar. This means that they can safely operate at
depths of 25 metres under water, which far exceeds the requirements of
Products branded Exir Telecom are designed to operate problem-free
the international IP68 standard.
for a minimum of 25 years without any maintenance or any external
www.leax.com
On-site Training
Keeping your workforce up to date with
the rapid advancements in todays
mobile telephone technology requires a
commitment to continuous training.
But can you afford the time it takes for
installers to attend training courses
when there are deadlines to be met?
LEAX Arkivator Telecom recognises these pressures, which is why we have developed
a series of flexible, on-site training courses designed to fit around your work schedule
EXAMPLES OF
COURSES
- not ours.
This increasingly popular training option minimises lost time travelling to an off-site
venue, and allows installers to conveniently update their skills at their place of work even
if the network is being constructed at several sites simultaneously. A typical connector
CONNECTOR
INSTALLATION COURSE
Basic course covering techniques
for proper connector installation.
installation course lasts half a day and can accommodate up to eight participants.
Our on-site training scheme is actually a series of related courses which focus on
the practical aspects of working with connectors and cables. This is a vitally impor-
INTRODUCTORY COURSE
This course provides introductory
theory and practical training relating to such areas as planning and
building fully operational antenna
lines for cellular telephony.
tant area, as incorrectly installed connectors can result in major power dissipation.
In simple terms, doing the job right the first time results in the highest level of cost
efficiency in the long run.
HANDS-ON TRAINING FOR EVERYONE
ADVANCED COURSE
This course offers an in-depth look
into various aspects of RF as well
as examines essential issues when
planning and building fully operational antenna lines
All of our instructors have extensive hands-on experience working with mobile telephony networks in a variety of situations. This means they are capable of answering
questions on both a theoretical and practical level.
During our Connector Installation Course all participants are given the opportunity to
install each of the connector types available in our program. Our qualified instructors are
For more detailed information

regarding courses, please contact us.
on hand to answer questions and to lend a helping hand when needed. They also check
each installation to ensure that it meets the required standards of workmanship.
All participants receive a personalised certificate of achievement upon successful
completion of our courses.
LEARN MORE AT LEAX ARKIVATOR TELECOM

LEAX Arkivator Telecom also holds advanced, 5-day courses geared primarily to technical supervisors, purchasers and project managers.
P +46 8 752 02 20
www.leax.com
Connectors
Exir Telecom branded connectors offer many built-in advantages, such as an expanding inner conductor for superior electrical performance, longer body construction for reduced stress on cables, and advanced weather protection features which
completely eliminate the need for putty tape or any other external weatherproofing.
The LEAX range of connectors are also fully tested and suitable for less harsh environments and indoor applications. All of our products have been tested in extreme
climatic conditions. Our connectors are fast and easy to install, and are fully compatible with all major cable brands.
Exir branded Connectors

1/2 Flexible Foam Dielectric
1/2 Flexible Foam Dielectric Right Angle
1/2 Foam Dielectric - Tighten Inner Conductor
1/2 Foam Dielectric Contact Springs
1/2 Foam Dielectric Right Angle
7/8 Foam Dielectric - Contact Springs
7/8 Foam Dielectric - Expanding Inner Conductor
1 1/4 Foam Dielectric
Tools for Foam and Superflex Connectors
LEAX branded Connectors

Connector, N Male for RGC8
Connectors, N Male for 3/8 in, FS
Connectors, 1/2 Foam Dielectric
Connectors, 7/8 Foam Dielectric
Adapter
www.leax.com
Connectors
1/2 Superflexible Foam Dielectric
PRODUCT FEATURES
Reusable
Auto-flaring for faster installation
IP68-classified and water-pressure proof tested down to 25 m
High quality O-rings on outer conductor and cable jacket ensure
functional integrity even after accidental damage to cable jacket
Designed to maintain high pressure on contact surfaces to reduce
intermodulation
COMMON FOR ALL

CABLE FORMAT
1/2"
CONNECTOR OPERATING
FREQUENCY
0 - 7500 MHz
VSWR / RETURN LOSS
0 - 2000 MHz
1.036 / -35 dB
0 - 2500 MHz
1.065 / -30 dB
CABLE COMPATIBILITY
Acome HPL 50-1/2 SF

Andrew FSJ4-50B
Cablewave S-FLC 12
Condumex RF 1/2-50 SF
Eupen 5092 1/2 Hiflex
Leoni FlexLine 1/2 S
NK Cables RFF 1/2"-50
RFS Cellflex SCF12-50J
INTERMODULATION*
2 x 20 W transmitter
< -156 dBc
CONNECTING TIME
5 - 6 min
WEIGHT
190 g (0.42 lb)
DIAMETER
27 mm (1.06 in)
LENGTH
76 mm (2.99 in)
OPERATING TEMP.
-55 C to +80 C
PIECES IN BOX
25
TOOL KIT
CONK-S012-B0
NM-S012-A0
NF-S012-A0
716M-S012-A0
716F-S012-A0
ARTICLE
NM-S012-A0
NF-S012-A0
716M-S012-A0
716F-S012-A0
CONNECTOR
N male
N female
DIN 7/16 male
DIN 7/16 female
* During intermodulation measurement attached cables are exposed to shock and vibration.
10
P +46 8 752 02 20
www.leax.com
Revision A
Connectors
1/2 Superflexible Foam Dielectric Right Angle
PRODUCT FEATURES
Reusable
No need for tape or other external weatherproofing
intermodulation
COMMON FOR ALL

CABLE FORMAT
1/2"
CONNECTOR OPERATING
FREQUENCY
0 - 7500 MHz
VSWR / RETURN LOSS
0 - 2000 MHz
1.036 / -35 dB
0 - 2500 MHz
1.065 / -30 dB
CABLE COMPATIBILITY
Acome HPL 50-1/2 SF

Andrew FSJ4-50B
Cablewave S-FLC 12
NK Cables RFF 1/2"-50
INTERMODULATION*
<-156 dBc
CONNECTING TIME
5 - 6 min
WEIGHT
300 g (0.66 lb)
DIAMETER
27 mm (1.06 in)
LENGTH
67 mm (2.64 in)
WIDTH
62 mm (2.44 in)
OPERATING TEMP.
-55 C to +80 C
PIECES IN BOX
25
TOOL KIT
CONK-S012-B0
NM-S012-B0
NF-S012-B0
716M-S012-B0
716F-S012-B0
ARTICLE
NM-S012-B0
NF-S012-B0
716M-S012-B0
716F-S012-B0
CONNECTOR
N male right angle
N female right angle
DIN 7/16 male right angle
DIN 7/16 female right angle
www.leax.com
Revision A
11
Connectors
1/2 Foam Dielectric - Tighten Inner Conductor
Connectors
1/2 Foam Dielectric
- Tighten Inner Conductor
PRODUCT FEATURES
Reusable
NoFEATURES
need for amalgamating tape or other external weatherproofing
PRODUCT
High
quality
O-rings on
outer
conductor
and cable jacket ensure
No need for
amalgamating
tape
or other
external
weatherproofing
Designed and
to maintain
high pressure
on contact surfaces to reduce
IP68-classified
water-pressure
proof tested
downintermodulation
to 25 m
High quality O-rings on outer conductor and cable jacket
ensure functional integrity even after accidental dam-
Nm-F012-G1
Nf-F012-G1
716m-F012-G1
716f-F012-G1
COMMON FOR ALL
age to cable jacket
1/2"
CABLE FORMAT
Designed to maintain high pre sure on contact surfaces

CONNECTOR OPERATING
to FREQUENCY
reduce intermodulation
0 - 2500 MHz
VSWR / RETURN LOSS

0 - 2000 MHz
1.036 / -35 dB
Reusable
0 - 2500 MHz
1.065 / -30 dB
10-year
warranty
CABLEcomprehensive
COMPATIBILITY
Andrew LDF4-50
NK Cables RFA 1/2 -50
Cellflex LCF 1/2 Cu2Y
ARTICLE
00Nm-F012-G1
RFS LCF 1/2 -5000Nf-F012-G1
Cu2Y
CABLE FORMAT
1/2
FREQUENCY RANGE
0 - 2.5 GHz Eupen 5128
CONNECTOR
N male
VSWR / RETURN LOSS
Leoni FlexLine 1/2 R

1.036 / -35 dB
1.036
Condumex RF 1/2
-50/ -35 dB
0 - 2 GHz
Cablewave FLC 12
1/2
0 - 2.5 GHz
Acome HPL 50- 1/2

flex
N female
0 - 2.5INTERMODULATION*
GHz
1.065 / -30 dB
CABLE2 COMPATIBILITY
Andrew LDF4-50
x 20 W transmitter
< -156 dBc
716m-F012-G1
716f-F012-G1
1/2
1/2
0 - 2.5 GHz
0 - 2.5 GHz
DIN 7/16 male
DIN 7/16 female
1.036 / -35 dB
NM-F012-G1
1.036 / -35 dBNF-F012-G1
1.065 / -30 dB
1.065 / -30 dB
1.065 / -30 dB
Andrew LDF4-50
Andrew LDF4-50
Andrew LDF4-50
CONNECTING TIME
NK Cables RFA
2 1/2-50
- 3 min
NK Cables RFA 1/2-50
WEIGHT
Cellflex LCF 1/2

190Cu2Y
g (0.42 lb) Cellflex LCF 1/2 Cu2Y
RFS LCF 1/2-50
-55 Cu2Y
C to +80 CRFS LCF 1/2-50 Cu2Y
RFS LCF 1/2-50 Cu2Y
RFS LCF 1/2-50 Cu2Y
Cablewave FLC 12
Cablewave FLC 12
Eupen 5128
CONK-F012-G0Eupen
(std.) 5128
Acome HPL 50-1/2 flex
CONK-F012-F0 (basic)
Eupen 5128
Eupen 5128
Condumex RF 1/2-50
Condumex RF 1/2-50
OPERATING TEMP.
PIECES IN BOX
TOOL-KIT
Cablewave FLC
2512
Cablewave FLC 12
Condumex RF 1/2-50
716F-F012-G1
Leoni FlexLine 1/2 R716M-F012-G1
Leoni FlexLine 1/2
R
Condumex RF 1/2-50
INTERMODULATION*
2 x 20ARTICLE
W transmitter
< -156 dBc

< -156 dBc00NF-F012-G1
00NM-F012-G1
CONNECTING TIME
2 - 3 min
2 - 3 min
CONNECTOR
N male
N female
WEIGHT
170 g (0.37 lb)
170 g (0.37 lb)
DIAMETER
27 mm (1.06 in)
27 mm (1.06 in)
DIAMETER
27 mm (1.06 in)
27 mm (1.06 in)
LENGTH
81.5 mm (3.21 in)
79.5 mm (3.13 in)
LENGTH
81.5 mm (3.21 in)
79.5 mm (3.13 in)
*
During
intermodulation
measurement
attached
cables
are
exposed
to
shock
and
vibration.
OPERATING TEMP.
118
< -156 dBc 716M-F012-G1 < -156 dBc 716F-F012-G1

2 - 3 min
DIN 7/16 male
DIN 7/16 female
170 g (0.37 lb)
170 g (0.37 lb)
34 mm (1.34 in)
29 mm (1.14 in)
34 mm (1.34 in)
29 mm (1.14 in)
71 mm (2.79 in)
71 mm (2.79 in)
71 mm (2.79 in)
71 mm (2.79 in)
2 - 3 min
-55C to +80C
-55C to +80C
-55C to +80C
PIECES IN BOX
25
25
25
25
TOOL-KIT
CONK-F012-G0 (std.)
CONK-F012-G0 (std.)
CONK-F012-G0 (std.)
CONK-F012-G0 (std.)
P +46 8 752 02 20
www.leax.com
-55C to +80C
Revision B
1/2 Foam Dielectric- Tighten Inner Conductor
Connectors
PRODUCT FEATURES
Reusable
Designed to maintain high pre sure on contact surfaces to reduce
intermodulation
COMMON FOR ALL

CABLE FORMAT
1/2"
CONNECTOR OPERATING
FREQUENCY
0 - 7500 MHz
VSWR / RETURN LOSS
0 - 2000 MHz
1.036 / -35 dB
0 - 2500 MHz
1.065 / -30 dB
CABLE COMPATIBILITY
Andrew LDF4-50
NK Cables RFA 1/2 -50
RFS LCF 1/2 -50 Cu2Y
Cablewave FLC 12
Eupen 5128
Acome HPL 50- 1/2 flex
Condumex RF 1/2 -50
NM-F012-H1
NF-F012-H1
716M-F012-H1
716F-F012-H1
INTERMODULATION*
< -156 dBc
CONNECTING TIME
2 - 3 min
WEIGHT
190 g (0.42 lb)
OPERATING TEMP.
-55 C to +80 C
PIECES IN BOX
25
TOOL-KIT
CONK-F012-H0 (std.)
ARTICLE
00NM-F012-H1
00NF-F012-H1
716M-F012-H1
716F-F012-H1
CONNECTOR
N male
N female
DIN 7/16 male
DIN 7/16 female
DIAMETER
27 mm (1.06 in) NM
27 mm (1.06 in) NF
34 mm (1.34 in) 7/16m
29 mm (1.14 in) 7/16f
LENGTH
68 mm (2.68 in) NM
66 mm (2.60 in) NF
57 mm (2.25 in) 7/16m
55 mm (2.17 in) 7/16f
12
P +46 8 752 02 20
www.leax.com
Revision B
Connectors
1/2 Foam Dielectric Right Angle
PRODUCT FEATURES
Reusable
intermodulation
COMMON FOR ALL

CABLE FORMAT
1/2"
CONNECTOR OPERATING
FREQUENCY
0 - 7500 MHz
VSWR / RETURN LOSS
0 - 2000 MHz
1.036 / -35 dB
0 - 2500 MHz
1.065 / -30 dB
CABLE COMPATIBILITY
Andrew LDF4-50
NK Cables RFA 1/2"-50
Cellflex LCF 1/2" Cu2Y
RFS LCF 1/2"-50 Cu2Y
Cablewave FLC 12
Eupen 5128
Condumex RF 1/2-50
INTERMODULATION*
< -156 dBc
CONNECTING TIME
2 - 3 min
WEIGHT
180 g (0.40 lb)
DIAMETER
25 mm (1.06 in)
LENGTH
60 mm (2.36 in)
WITH
49.5 mm (1.95 in)
OPERATING TEMP.
-55 C to +80 C
PIECES IN BOX
25
TOOL-KIT
CONK-F012-G0 (std.)
00NM-FO12-AI00
ARTICLE
00NM-FO12-AI00
716M-F012-AI00
CONNECTOR
N male right angle
DIN 7/16 male right angle
716M-F012-AI00
www.leax.com
Revision A
13
Connectors
PRODUCT FEATURES
Reusable
intermodulation
COMMON FOR ALL

CABLE FORMAT
7/8"
CONNECTOR OPERATING
FREQUENCY
0 - 7500 MHz
VSWR / RETURN LOSS
0 - 2000 MHz
1.036 / -35 dB
0 - 2500 MHz
1.065 / -30 dB
CABLE COMPATIBILITY

Acome HPL 50-7/8 LA
Acome M5423 7/8 UP
Andrew AVA5-50
Andrew LDF5-50A
Cablewave FLC 78
Cellflex LCF78-50JA
Condumex RF 7/8-50
Eupen 5228
Eupen 5228A EC5-50A
NK Cables RF 7/8"-50
NK RFA 7/8
Tsvetlit PK50-22-39-C 7/8"R
HANSEN 7/8"
00NM-F078-AF00
00NF-F078-AF00
716M-F078-AF00
716F-F078-AF00
INTERMODULATION*
< -156 dBc
CONNECTING TIME
2 - 3 min
WEIGHT
180 g (0.40 lb)
DIAMETER
39.5 mm (1.56 in)
OPERATING TEMP.
-55 C to +80 C
PIECES IN BOX
25
TOOL KIT
CONK-F078-AJ00
ARTICLE
00NM-F078-AF00
00NF-F078-AF00
716M-F078-AF00
716F-F078-AF00
CONNECTOR
N male
N female
DIN 7/16 male
DIN 7/16 female
LENGTH
73 mm (2.87 in) NM
71 mm (2.80 in) NF
62 mm (2.44 in) 7/16m
60 mm (2.36 in) 7/16f
14
P +46 8 752 02 20
www.leax.com
Revision B
Connectors
7/8 Foam Dielectric - Expanding Inner Conductor
PRODUCT FEATURES
Reusable
Expanding inner conductor
intermodulation
COMMON FOR ALL

CABLE FORMAT
7/8"
CONNECTOR OPERATING
FREQUENCY
0 - 7500 MHz
VSWR / RETURN LOSS
0 - 2000 MHz
1.036 / -35 dB
0 - 2500 MHz
1.065 / -30 dB
CABLE COMPATIBILITY

Acome HPL 50-7/8 LA
Acome M5423 7/8 UP
Andrew AVA5-50
Andrew LDF5-50A
Cablewave FLC 78
Cellflex LCF78-50JA
Condumex RF 7/8-50
Eupen 5228
Eupen 5228A EC5-50A
NK RFA 7/8
HANSEN 7/8"
00NM-F078-AG00
00NF-F078-AG00
716M-F078-AG00
716F-F078-AG00
INTERMODULATION*
< -156 dBc
CONNECTING TIME
2 - 3 min
WEIGHT
180 g (0.40 lb)
DIAMETER
39.5 mm (1.56 in)
OPERATING TEMP.
-55 C to +80 C
PIECES IN BOX
25
TOOL KIT
CONK-F078-AJ00
ARTICLE
00NM-F078-AG00
00NF-F078-AG00
716M-F078-AG00
716F-F078-AG00
CONNECTOR
N male
N female
DIN 7/16 male
DIN 7/16 female
LENGTH
73 mm (2.87 in) NM
71 mm (2.80 in) NF
62 mm (2.44 in) 7/16m
60 mm (2.36 in) 7/16f
www.leax.com
Revision B
15
Connectors
PRODUCT FEATURES
Reusable
intermodulation
COMMON FOR ALL

CABLE FORMAT
1 1/4"
CONNECTOR OPERATING
FREQUENCY
0 - 7500 MHz
VSWR / RETURN LOSS
0 - 2000 MHz
1.036 / -35 dB
0 - 2500 MHz
1.065 / -30 dB
CABLE COMPATIBILITY
Acome HPL 50-1 1/4 flex

Andrew LDF6-50
Cablewave FLC 114
Cellflex LCF 1 1/4 Cu2Y
Condumex RF 1 1/4-50
Eupen 5328
Eupen Hiflex EC6-50-HF
Leoni FlexLine 1 1/4 R
NK Cables RFA 1 1/4"-50
RFS LCFS114-50JA
00NM-F114-AD00
00NF-F114-AD00
716M-F114-AD00
716F-F114-AD00
INTERMODULATION*
< -156 dBc
CONNECTING TIME
3 - 4 min
WEIGHT
700 g (1.54 lb)
DIAMETER
51 mm (2 in)
OPERATING TEMP.
-55 C to +80 C
PIECES IN BOX
20
TOOL KIT
CONK-F114-AB00
ARTICLE
00NM-F114-AD00
00NF-F114-AD00
716M-F114-AD00
716F-F114-AD00
CONNECTOR
N male
N female
DIN 7/16 male
DIN 7/16 female
LENGTH
110 mm (4.33 in) NM
108 mm (4.25 in) Nf
98 mm (3.86 in) 7/16m
97 mm (3.82 in) 7/16f
16
P +46 8 752 02 20
www.leax.com
Revision A
Connectors
PRODUCT FEATURES
Reusable
intermodulation
COMMON FOR ALL

CABLE FORMAT
1 5/8"
CONNECTOR OPERATING
FREQUENCY
0 - 7500 MHz
VSWR / RETURN LOSS
0 - 2000 MHz
1.036 / -35 dB
0 - 2500 MHz
1.065 / -30 dB
CABLE COMPATIBILITY
Acome HPL 50-158 flex

Andrew AVA7-50
Andrew LDF7-50A
Cablewave FLC 158
Cellflex LCF 1 5/8" Cu2Y
RFS LCF158-50JA
00NM-F158-AD00
00NF-F158-AD00
716M-F158-AD00
716F-F158-AD00
INTERMODULATION*
< -156 dBc
CONNECTING TIME
3 - 4 min
WEIGHT
1100 g (2.42 lb)
DIAMETER
65 mm (2.48 in)
OPERATING TEMP.
-55 C to +80 C
PIECES IN BOX
10
TOOL KIT
CONK-F158-AC00
ARTICLE
00NM-F158-AD00
00NF-F158-AD00
716M-F158-AD00
716F-F158-AD00
CONNECTOR
N male
N female
DIN 7/16 male
DIN 7/16 female
LENGTH
138 mm (5.43 in) NM
135 mm (5.32 in) NF
125 mm (4.92 in) 7/16m
124 mm (4.88 in) 7/16f
www.leax.com
Revision A
17
Cable Preparation Tools

for Cable Connectors
PRODUCT PROFILE
The Exir telecom branded tool kits are designed to enable fast installation of our connectors. Tools can be ordered separately or in kits. All
connectors and tool kits are delivered with illustrated mounting instructions. We also offer courses in connector installation.
ARTICLE
KIT-BAG CONTENTS
CONK-S012-B0
Cable peeler, cable holders, inner conductor tightener (with torque) and flaring tool, open
wrenches, wrench for N and DIN 7/16, silicone gasket protector, N to DIN 7/16 adapter, brush.
CONK-F012-G0
Standard
CONK-F012-H0
Standard
CONNECTORS
Cable peeler, cable holders, inner conductor tightener (with torque) and flaring tool,
open wrenches, wrench for N and DIN 7/16, N to DIN 7/16 adapter, brush.
xxxx-F012-H1
Cable peeler, inner conductor tightener, N to DIN 7/16 adapter.
xxxx-F012-G1
xxxx-F012-H1
xxxx-F012-AH00
xxxx-F012-AI00
Cable peeler, cable holders, open wrenches, wrench for N and DIN 7/16, brush,
razor blades, inner conductor tightener 7/16, N to DIN 7/16 adapter.
xxxx-F078-AE02
xxxx-F078-AF00
xxxx-F078-AG00
Cable peeler, inner conductor tightener, N to DIN 7/16 adapter.
xxxx-F078-AE02
xxxx-F078-AF00
xxxx-F078-AG00
CONK-F114-AB00
Cable peeler, cable holders, hook spanners, wrench for N and DIN 7/16, brush, cutting jig.
xxxx-F114-AD00
CONK-F158-AC00
Cable peeler, cable holders, hook spanners, wrench for N and DIN 7/16, brush, cutting jig.
xxxx-F158-AD00
CONK-F078-G0
Basic
18
xxxx-F012-G1
xxxx-F012-AH00
xxxx-F012-AI00
Cable peeler, cable holders, flaring tool, open wrenches, wrench for N and DIN 7/16, brush.
CONK-F012-F0
Basic
CONK-F078-AJ00
Standard
xxxx-S012-A0
xxxx-716M-S012-B0
P +46 8 752 02 20
www.leax.com
Revision A
Tools
Tools for Foam and Superflex Connectors
OPEN WRENCHES
OCST-S012-A1
1/2 flexible
OCST-F012-H0
1/2 H1
RAZOR BLADES
OCST-S012-A1
1/2 G1
014-54503
OCST-F078-B0
7/8
Big for 7/8

10 pieces
014-54504
Small for
1/2, 1 1/4, 1 5/8
CABLE PEELER
PEEL-S012-B0
1/2 flexible
PEEL-F012-F0
1/2
PEEL-F078-G0
7/8
PEEL-F114-A0
1 1/4
PEEL-F158-A0
1 5/8
WRENCH
OCST-N716-A1
ADAPTER
N and DIN 7/16
ICST-000N-A1
N to DIN 7/16
SILICONE GASKET PROTECTOR

INNER CONDUCTOR
STRAINERS AND FLARING TOOLS
ISFL-S012-B0
1/2 flexible
FLAT-F012-H0
1/2 H1
ISFL-F012-B0
1/2 G1
ICST-7160-C0*
7/16 without torque
CONT-S012-A1
1/2 flexible
SPANNERS
014-51510
1 1/4 and 1 5/8
SILICONE GREASE
014-54502
Silicone grease
CABLE HOLDERS
CUTTING JIGS
CABH-0012-A1
1/2 flexible
CABH-F012-A1
1/2
CABH-0078-A1
7/8
CJIG-F114-A1
1 1/4
CABH-0114-A1
1 1/4
BRUSH
CJIG-F158-A1
1 5/8
CABH-0158-A1
1 5/8
014-54500
www.leax.com
Plastic brush
Revision A
19
Connectors
N Male for RGC8
COMMON FOR ALL
716M-RGC8-BA00
IMPEDANCE
50 Ohm
INSERTION LOSS
0.05F(GHz) dB
VSWR / RETURN LOSS
824 - 960 MHz
-24.3 dB (1.13)
1710 - 2690 MHz
-23.1 dB (1.15)
INTERMODULATION
3rd order
< -155 dBc (112 dBm)
3rd order test method
Two +43 dBm Carriers
OPERATING TEMPERATURE
-55 C to +85 C
CONTACT ATTACHMENT
22
Outer
Crimp
Inner
Solder
P +46 8 752 02 20
www.leax.com
Revision A
Connectors
N Male for 3/8 in, FS
COMMON FOR ALL
716M-F038-BA00
CABLE FORMAT
50 Ohm
IMPEDANCE
3/8
INSERTION LOSS
0.05F(GHz) dB
VSWR / RETURN LOSS
824 - 960 MHz
-28.3 dB (1.08)
1710 - 2690 MHz
-26.5 dB (1.10)
INTERMODULATION
3rd order
< -155 dBc (112 dBm)
-55 C to +85 C
www.leax.com
Revision A
23
Connectors
1/2 Foam Dielectric
PRODUCT FEATURES
Reusable
High quality O-rings
intermodulation
COMMON FOR ALL
1/2"
CABLE FORMAT
VSWR / RETURN LOSS
0 - 2700 MHz
1.10 / -26.5 dB
CABLE COMPATIBILITY
Andrew LDF4-50
Cablewave FLC 12
00NM-F012-BA00
00NF-F012-BA00
716M-F012-BA00
716F-F012-BA00
Eupen 5128
Condumex RF 1/2-50
INTERMODULATION*
< -155 dBc
CONNECTING TIME
3 - 4 min
DIAMETER
-55 C to +80 C
OPERATING TEMP.
ARTICLE
00NM-F012-BA00
00NM-F012-BA00
716M-F012-BA00
716F-F012-BA00
CONNECTOR
N male
N female
DIN 7/16 male
DIN 7/16 female
LENGTH
??? mm (in)
??? mm (in)
50 mm (1.97 in)
?? (?? in)
WEIGHT
??? mm (in)
??? mm (in)
118 g (0.26 lb)
104 g (0.23 lb)
20
P +46 8 752 02 20
www.leax.com
Revision A
Connectors
7/8 Foam Dielectric
PRODUCT FEATURES
Reusable
High quality O-rings
intermodulation
COMMON FOR ALL
7/8"
CABLE FORMAT
VSWR / RETURN LOSS
0 - 2700 MHz
1.10 / -26.5 dB
CABLE COMPATIBILITY

Acome HPL 50-7/8 LA
Acome M5423 7/8 UP
Andrew AVA5-50
Andrew LDF5-50A
Cablewave FLC 78
Cellflex LCF78-50JA
Condumex RF 7/8-50
Eupen 5228
Eupen 5228A EC5-50A
00NM-F078-BA00
00NF-F078-BA00
716M-F078-BA00
716F-F078-BA00
NK RFA 7/8
HANSEN 7/8"
INTERMODULATION*
< -155 dBc
CONNECTING TIME
3 - 4 min
DIAMETER
35 mm (1.38 in)
OPERATING TEMP.
-55 C to +80 C
ARTICLE
00NM-F078-BA00
00NM-F078-BA00
716M-F078-BA00
716F-F078-BA00
CONNECTOR
N male
N female
DIN 7/16 male
DIN 7/16 female
LENGTH
???
???
WEIGHT
???
???
57 mm (2.24 in)
195 g (0.43 lb)
www.leax.com
Revision A
21
Adapter
ARTICLE
NO
FREQUENCY RANGE
824 - 960 & 1710 - 2690 MHz
7/16M-7/16M
716M-716M-BA00
IMPEDANCE
50 Ohm
7/16F-7/16F
716F-716F-BA00
7/16M-7/16F
716M-716F-BA00
7/16M-NF
716M-00NF-BA00
7/16M-NM
716M-00NM-BA00
7/16F-NF
716F-00NF-BA00
7/16F-NM
716F-00NF-BA00
ELECTRICAL CHARACTERISTICS
INSERTION LOSS
0 - 3000 MHz
< 0.1 dB
RETURN LOSS/VSWR
0 - 3000 MHz
< 32 dB (1.05)
INTERMODULATION
24
3rd order
-155 dBc (112 dBm) @ 910 MHz
NF-NF
00NF-00NF-BA00
NM-NM
00NM-00NM-BA00
-40 C to +85 C
NF-NF
00NM-00NF-BA00
SEALING
O-ring
PLATING
Silver-plated
P +46 8 752 02 20
www.leax.com
Revision A
FEEDER & Jumper Cables

The LEAX branded feeder cable range provides a very good standard feeder cable
solution. These cables are cased in black polyethylene and as usual very well positioned price wise.
Exir Telecom branded jumper cables are water-pressure proof down to 25 meters,
which is equivalent to a pressure of 2.5 bar and far exceeds the requirements for IP68classification. Consequently there is no need for tape or any other external weatherproofing. All jumper cables are available in any length and offer a generous bending
radius. Every cable is tested and can as an option come individually labeled with the results to identify its measured return loss performance within the 0-3000 MHz range.
LEAX branded Feeder Cables

RG8 Link Cable
Feeder Cable, Foam Coaxial Cable, 3/8 in, Black PE Jacket
Exir branded Jumper Cables

1/2 Foam Dielectric Cable
1/2 Superflexible Foam Dielectric Cable
1/2 Superflexible Foam Dielectric Cable - Angle Connector
LEAX branded Jumper Cables

www.leax.com
25
RG8 Link Cable
PRODUCT STRUCTURE
Designation
MATERIAL
DIAMETER (mm)
Inner Conductor
Copper clad aluminium
2.740.025
Dielectric
Foam Polyethylene
7.240.13
Outer Conductor
Bonded aluminum foil
--
Outer Conductor
Tinned copper wire braid
Nom. 8.13
Jacket
Blac polyethylene, PE
10.160.2
ELECTRICAL
FEED-F0R8-AA00
Attenuation @ 20C and SEA LEVEL
Impedance
50 Ohm
Frequency (MHz)
Attenuation (dB/100m)
140
6.0
RETURN LOSS/VSWR
5 - 3000 MHz
1.20
350
9.0
Max Operating VOLTAGE
3.0
900
15.0
Velocity
85%
1800
20.0
Capacitance
Nom. 78
1900
21.0
Insulation resistance
5000
2500
25.0
Screening effectiveness
90
3000
28.0
4000
34.0
5000
38.0
6000
42.0
ENVIRONMENTAL
Operating Temperature
-40C ~ +80C
Bending radius once
25
Repeated bending radius
76
Flexible application radius
102
Compliancy
RoHS
www.leax.com
Revision A
29
Feeder Cable
Foam Coaxial Cable, 3/8 in, Black PE Jacket
PRODUCT STRUCTURE
Designation
MATERIAL
DIAMETER (mm)
Inner Conductor
Copper clad aluminum wire
3.300.05
Dielectric
Physical Foam Polyethylene
8.300.20
Outer Conductor
Corrugated copper tube
9.600.25
Jacket
Black polyethylene, PE
11.200.30
ELECTRICAL
FEED-F038-AA00
MECHANICAL
Impedance
50 Ohm
Min Bend Radius, Multiple Bends
95 mm
Min Bend Radius, Single Bend
40 mm
RETURN LOSS
824 - 960 MHz
-24.3 (1.13)
Bending moment
1.9 Nm
1710 - 2170 MHz
-24.3 (1.13)
Tensile strength
1100 N
Max Operating Frequency
13000 MHz
Velocity
88 %
ENVIRONMENTAL
Capacitance
76 pF/m
Passive inter-modulation
-155 dBc @ 2 x 20W (43dBm)
-55C ~ +85C
RF Peak Power Rating
15.6 KW
Installation Temperature
-40C ~ +60C
RF Peak Voltage
4000 V
Storage Temperature
-70C ~ +85C
Jacket Spark Test (RMS)
5000 V
Relative humidity
0 ~ 95%
Dielectric Resistance
5000 MOhm / Km
Compliancy
ROHS 2002/95/EC
Attenuation and Average Power

Frequency (MHz)
Average Power (KW)
450 MHz
7.52
1.03
824 MHz
10.40
0.74
960 MHz
11.30
0.68
1000 MHz
11.56
0.67
1800 MHz
16.00
0.48
2000 MHz
16.97
0.45
2200 MHz
17.91
0.43
2500 MHz
19.26
0.40
2700 MHz
20.13
0.38
www.leax.com
Revision A
27
Feeder Cable
PRODUCT STRUCTURE
Designation
MATERIAL
DIAMETER (mm)
Inner Conductor
Copper clad aluminum wire
4.800.03
Dielectric
12.200.2
Outer Conductor
Regular corrugated copper tube
13.900.25
Jacket
15.700.20
ELECTRICAL
FEED-F012-AA00
MECHANICAL
Impedance
50 Ohm
125 mm
50 mm
RETURN LOSS
824 - 960 MHz
-24.3 (1.13)
Bending moment
3.8 Nm
1710 - 2170 MHz
-24.3 (1.13)
Tensile strength
1100 N
8800 MHz
Velocity
88 %
ENVIRONMENTAL
Capacitance
76 pF/m
-155 dBc @ 2 x 20W (43dBm)
-55C ~ +85C
40 KW
-40C ~ +60C
RF Peak Voltage
4000 V
Storage Temperature
-70C ~ +85C
8000 V
Relative humidity
0 ~ 95%
Dielectric Resistance
5000 MOhm / Km
Compliancy
ROHS 2002/95/EC
26
Frequency (MHz)
Average Power (KW)
450 MHz
4.75
1.61
824 MHz
6.56
1.16
960 MHz
7.12
1.07
1000 MHz
7.28
1.05
1800 MHz
10.06
0.76
2000 MHz
10.67
0.72
2200 MHz
11.25
0.68
2500 MHz
12.09
0.63
2700 MHz
12.63
0.60
P +46 8 752 02 20
www.leax.com
Revision A
Feeder Cable
PRODUCT STRUCTURE
Designation
MATERIAL
DIAMETER (mm)
Inner Conductor
Copper tube
8.900.10
Dielectric
22.500.40
Outer Conductor
Regular corrugated copper tube
24.900.30
Jacket
27.300.20
ELECTRICAL
FEED-F078-AA00
MECHANICAL
Impedance
50 Ohm
250 mm
125 mm
RETURN LOSS
824 - 960 MHz
-24.3 (1.13)
Bending moment
19.0 Nm
1710 - 2170 MHz
-24.3 (1.13)
Tensile strength
1450 N
5000 MHz
Velocity
88 %
ENVIRONMENTAL
Capacitance
76 pF/m
-155 dBc @ 2 x 20W (43dBm)
-55C ~ +85C
91 KW
-40C ~ +60C
RF Peak Voltage
6000 V
Storage Temperature
-70C ~ +85C
8000 V
Relative humidity
0 ~ 95%
DIELECTRIC RESISTENCE
5000 MOhm / KM
Compliancy
ROHS 2002/95/EC
28
Frequency (MHz)
Average Power (KW)
450 MHz
2.44
3.44
824 MHz
3.38
2.49
960 MHz
3.67
2.29
1000 MHz
3.76
2.24
1800 MHz
5.21
1.61
2000 MHz
5.53
1.52
2200 MHz
5.83
1.44
2500 MHz
6.27
1.34
2700 MHz
6.55
1.28
P +46 8 752 02 20
www.leax.com
Revision A
Jumper Cables
1/2 Foam Dielectric Cable
PRODUCT FEATURES
10-year comprehensive warranty
intermodulation
Each cable individually tested an labelled with return loss graph,
0 - 2200 MHz
COMMON FOR ALL

CABLE TYPE
1/2"
FREQUENCY RANGE
0 - 5000 MHz
VSWR / RETURN LOSS
0 - 1000 MHz
1.08 / -28 dB (-35 dB)*
1000 - 2200 MHz
1.10 / -26 dB (-35 dB)*
INTERMODULATION**
< -156 dBc
-55 C to +80 C
DIN 7/16 TO DIN 7/16

ARTICLE
CONNECTORS
JBB0-F012-ABxx***
DIN 7/16 male to DIN 7/16 male
JAB0-F012-ABxx
DIN 7/16 female to DIN 7/16 male
DIN 7/16 TO N
ARTICLE
CONNECTORS
JBD0-F012-ABxx
DIN 7/16 male to N male
JAD0-F012-ABxx
DIN 7/16 female to N male
N TO N
ARTICLE
CONNECTORS
JDD0-F012-ABxx
N male to N male
JCD0-F012-ABxx
N female to N male
* Typical return loss connector.

** During intermodulation measurement attached cables are exposed to shock and vibration.
*** XX is the length of the cable. For example: AB05=0.5 m, AB10=1.0 m.
30
P +46 8 752 02 20
www.leax.com
Revision A
Jumper Cables
PRODUCT FEATURES
Each cable individually tested
Designed to maintain high pressure on contact surfacces to reduce
intermodulation
COMMON FOR ALL

CABLE TYPE
1/2" Superflex
FREQUENCY RANGE
0 - 5000 MHz
VSWR / RETURN LOSS
0 - 2700 MHz
1.12 / -25 dB*
INTERMODULATION**
< -160 dBc
-55 C to +80 C

ARTICLE
CONNECTORS
JBB0-S012-ACxx***
JAB0-S012-ACxx
DIN 7/16 TO N
ARTICLE
CONNECTORS
JBD0-S012-ACxx
JBC0-S012-ACxx
DIN 7/16 male to N female
N TO N
ARTICLE
CONNECTORS
JDD0-S012-ACxx
N male to N male
JCC0-S012-ACxx
N female to N female
*
Typical performance for jumpers of ordinary length.
** During intermodulation measurement, cables were exposed to shock and vibration.
*** XX is the length of the cable. For example: AC05=0.5 m, AC10=1.0 m.
www.leax.com
Revision A
31
Jumper Cables
- Angle Connector Angle Connector
PRODUCT FEATURES
Each cable individually tested
Outstanding VSWR and IM values
COMMON FOR ALL

CABLE TYPE
1/2" Superflex
FREQUENCY RANGE
0 - 5000 MHz
VSWR / RETURN LOSS
0 - 2700 MHz
1.12 / -25 dB*
INTERMODULATION**
< -160 dBc
-55 C to +80 C

ARTICLE
CONNECTORS
JBA1-S012-ACxx***
DIN 7/16 male angle to DIN 7/16 female
JBB1-S012-ACxx
DIN 7/16 male angle to DIN 7/16 male
DIN 7/16 TO N
ARTICLE
CONNECTORS
JBC1-S012-ACxx
DIN 7/16 male angle to N female
JBD1-S012-ACxx
DIN 7/16 male angle to N male
JDA1-S012-ACxx
DIN 7/16 female to N male angle
JDB1-S012-ACxx
DIN 7/16 male to N male angle
N TO N
ARTICLE
CONNECTORS
JDC1-S012-ACxx
N male angle to N female
JDD1-S012-ACxx
N male angle to N male
*
*** XX is the length of the cable. For example: AC05=0.5 m, AC10=1.0 m.
32
P +46 8 752 02 20
www.leax.com
Revision C
Jumper Cables
PRODUCT FEATURES
intermodulation
COMMON FOR ALL

CABLE TYPE
1/2" Superflex
FREQUENCY RANGE
0 - 5000 MHz
VSWR / RETURN LOSS
0 - 2700 MHz
1.12 / -25 dB*
INTERMODULATION**
< -160 dBc
-55 C to +80 C

ARTICLE
CONNECTORS
JBB0-S012-BAxx***
JAB0-S012-BAxx
DIN 7/16 TO N
ARTICLE
CONNECTORS
JBD0-S012-BAxx
JBC0-S012-BAxx
DIN 7/16 male to N female
N TO N
ARTICLE
CONNECTORS
JDD0-S012-BAxx
N male to N male
JCC0-S012-BAxx
N female to N female
* Typical return loss connector.

** During intermodulation measurement attached cables are exposed to shock and vibration.
*** XX is the length of the cable. For example: BA05=0.5 m, BA10=1.0 m.
34
P +46 8 752 02 20
www.leax.com
Revision C
Jumper Cables
- Angle Connector Angle Connector
PRODUCT FEATURES
intermodulation
COMMON FOR ALL

CABLE TYPE
1/2" Superflex
FREQUENCY RANGE
0 - 5000 MHz
VSWR / RETURN LOSS
0 - 2700 MHz
1.12 / -25 dB*
INTERMODULATION**
< -160 dBc
-55 C to +80 C

ARTICLE
CONNECTORS
JBA1-S012-BAxx***
DIN 7/16 male angle to DIN 7/16 female
JBB1-S012-BAxx
DIN 7/16 male angle to DIN 7/16 male
DIN 7/16 TO N
ARTICLE
CONNECTORS
JBC1-S012-BAxx
DIN 7/16 male angle to N female
JBD1-S012-BAxx
DIN 7/16 male angle to N male
JDA1-S012-BAxx
DIN 7/16 female to N male angle
JDB1-S012-BAxx
DIN 7/16 male to N male angle
N TO N
ARTICLE
CONNECTORS
JDC1-S012-BAxx
N male angle to N female
JDD1-S012-BAxx
N male angle to N male
*
*** XX is the length of the cable. For example: BA05=0.5 m, BA10=1.0 m.
www.leax.com
Revision C
33
EMP & Grounding

Exir Telecom branded EMP protectors and grounding kits protect telecom sites
from lightning strikes and surges that damage equipment and cause system
breakdown. The products have been tested with a lightning pulse of 50 kA,
10/350 ms, and have passed without sustaining any damage or loss of performance.
Thanks to our O-ring protection system, the grounding kits are water-pressure
proof down to 25 metres, which is equivalent to a pressure of 2.5 bar and far exceeds the requirements for IP68-classification. Consequently there is no need
for tape or any other external weatherproofing.
Exir branded EMP & Grounding

EMP Protectors, Triple Band
EMP Protectors, Gas discharge tube, DC-3000 MHz
EMP Protectors, Short circuit, 750 - 3000 MHz
Grounding Kits, Lightning Protection for Foam Dielectric Cables
Tool Kits
Grounding Kit, Lightning Protection for 1/2 Superflexible Foam Dielectric Cable
External Grounding Kits - Lightning Protection for Connectors
www.leax.com
35
EMP Protectors
Triple Band
EMP Protectors, Triple Band
PRODUCT FEATURES
Designed to maintain high pressure oncontact surfaces to reduce
intermodulation
No need for amalgamating tape or other external weatherproofing
COMMON FOR ALL
806 - 960 MHz
FREQUENCY RANGE
1710 - 2170 MHz

VSWR / RETURN LOSS
806 - 890 MHz
1.17 / -22 dB
890 - 960 MHz
1.12 / -25 dB
1710 - 2200 MHz
1.12 / -25 dB
INTERMODULATION*
MOUNTING BRACKET
2 x 20 W Tx
< -156 dBc
IMPEDANCE
50 ohm
SURGE CURRENT
100 kA
HANDLING CAPABILITY
(test pulse 8/20 s)
ENERGY
test pulse 4 kV 1.2/50 s
The EMP protector is available with

grounding bracket for mounting directly on grounding bars on request.
test pulse 2 kA 8/20 s

WEIGHT
560 g (1.23 lb)
DIMENSIONS
30 x 40 x 110 mm
HxWxD
(1.17 x 1.56 x 4.29 in)
OPERATING TEMP.
-55 C to +80 C
PIECES IN BOX
25
ARTICLE
EMPP-0822-AA00
EMPP-0822-AB00
EMPP-0822-AC00
EMPP-0822-AD00
CONNECTORS
DIN 7/16 female to RX/TX -
DIN 7/16 male to RX/TX -
N female to RX/TX -
N male to RX/TX -
DIN 7/16 male to antenna
DIN 7/16 female to antenna
N male to antenna
N female to antenna
600 W
600 W
150 W
150 W
INPUT POWER
36
P +46 8 752 02 20
www.leax.com
Revision A
EMP Protectors, Gas discharge tube, DC-3000 MHz
EMP Protectors
Gas discharge tube, DC - 3000 MHz
PRODUCT FEATURES
DC-Pass
AISG compliant
Made of silver-plated brass
Available with grounding cable or bulkhead mounting
COMMON FOR ALL

FREQUENCY RANGE
DC - 3000 MHz
VSWR / RETURN LOSS
1.22 / -20 dB
IMPEDANCE
50 ohm
DISCHARGE VOLTAGE
230 or 90 V*
IMPULSE DISCHARGE CURRENT
1 impulse (8/20 s)
20 kA
5 impulses (8/20 s) in 3 min
10 kA
IMPULSE SPARK OVER VOLTAGE
<700 V (1 kV/s)
WEIGHT
350 g (0.8 lb)
DIMENSIONS
68 x 34 x 34 mm
HxWxD
(2.67 x 1.33 x 1.33 in)
OPERATING TEMP.
-55 C to +80 C
* 470 and 600 V available on request.
230 V WITH GROUNDING CABLE

ARTICLE
EMPG-0030-AA00
EMPG-0030-AB00
EMPG-0030-AC00
EMPG-0030-AD00
CONNECTOR
7/16 f - 7/16 f
7/16 f - 7/16 m
NF - NF
NF - NM
230 V BULKHEAD MOUNTING

ARTICLE
EMPG-0030-AE00
EMPG-0030-AF00
EMPG-0030-AG00
EMPG-0030-AH00
CONNECTOR
7/16 f - 7/16 f
7/16 f - 7/16 m
NF - NF
NF - NM
90 V WITH GROUNDING CABLE

ARTICLE
EMPG-0030-BA00
EMPG-0030-BB00
EMPG-0030-BC00
EMPG-0030-BD00
CONNECTOR
7/16 f - 7/16 f
7/16 f - 7/16 m
NF - NF
NF - NM
90 V BULKHEAD MOUNTING
ARTICLE
EMPG-0030-BE00
EMPG-0030-BF00
EMPG-0030-BH00
EMPG-0030-BH00
CONNECTOR
7/16 f - 7/16 f
7/16 f - 7/16 m
NF - NF
NF - NM
www.leax.com
Revision C
37
EMP Protectors, Short circuit, 750 - 3000 MHz
EMP Protectors
Short circuit, 750 - 3000 MHz
PRODUCT FEATURES
Protected from both ways
intermodulation
COMMON FOR ALL

FREQUENCY RANGE
750 - 3000 MHz
VSWR / RETURN LOSS
1.22 / -20 dB
INTERMODULATION*
2 x 20 W Transmitter
< -156 dBc
IMPEDANCE
50 ohm
SURGE CURRENT
100 kA
HANDLING CAPABILITY
Test pulse 8/20 s
ENERGY
test pulse 4 kV 1.2/50 s

test pulse 2 kA 8/20 s
WEIGHT
400 g
DIMENSIONS
113 x 34 x 34 mm
HxWxD
(4.44 x 1.33 x 1.33 in)
OPERATING TEMP.
-55 C to +80 C
ARTICLE
EMPP-0830-AK00
EMPP-0830-AM00
EMPP-0830-AL00
CONNECTOR
7/16 f - 7/16 M
Nf - Nm
7/16 f - 7/16 f
INPUT POWER
600 W
150 W
600 W
38
P +46 8 752 02 20
www.leax.com
Revision B
Grounding Kits
Grounding Kits, Lightning Protection

for Foam Dielectric Cables
Lightning Protection for Foam Dielectric Cables
PRODUCT FEATURES
Reusable
Fast and easy installation
Large contact surface area
Fits multiple cable brands
PRODUCT PROFILE
Our Exir Telecom branded grounding kits feature an efficient design enabling multiple units
to be mounted very close together. A simple, adjustable construction allows for easy attachment to a wide range of cables from various manufacturers. These grounding kits are reusable
and 100% weatherproof without the need for tape or any other external weatherproofing.
The contact surfaces are designed to closely fit the corrugated surface of the outer conductor, thus avoiding unnecessary pressure. As a result, the effect of grounding on the
VSWR measurement of the antenna line is barely detectable.
ARTICLE
GROU-F012-AB00
GROU-F078-AB00
GROU-F114-AB00
GROU-F158-AB00
CABLE COMPATIBILITY
Andrew LDF4-50
Acome HPL 50-1 1/4 flex
Acome HPL 50-158 flex
Acome HPL 50-7/8 LA
Andrew LDF6-50
Andrew AVA7-50
Acome M5423 7/8 UP
Cablewave FLC 114
Andrew LDF7-50A
Andrew AVA5-50
Cellflex LCF 1 1/4 Cu2Y
Cablewave FLC 158
Cablewave FLC 12
Andrew LDF5-50A
Cellflex LCF 1 5/8" Cu2Y
Eupen 5128
Cablewave FLC 78
Eupen 5328
Eupen Hiflex EC6-50-HF
Cellflex LCF78-50JA
Condumex RF 1/2-50
Condumex RF 7/8-50
RFS LCF158-50JA
Eupen 5228
RFS LCFS114-50JA
Eupen 5228A EC5-50A

NK RFA 7/8
HANSEN 7/8"
GROUND CONN.
Cable clip, M5
Cable clip, M5
Cable clip, M5
DIMENSIONS
50 x 25 x 32 mm
50 x 32 x 43 mm
50 x 43 x 57 mm
52 x 54 x 68 mm
H x W x D (front view)
(1.97 x 0.98 x 1.26 in)
(1.97 x 1.26 x 1.69 in)
(1.97 x 1.69 x 2.24 in)
(2.05 x 2.13 x 2.68 in)
CONTACT AREA
>25 mm (0.04 in)
>25 mm (0.04 in)
>25 mm (0.04 in)
>25 mm (0.04 in)
WEIGHT
242 g (0.53 lb)
306 g (0.66 lb)
424 g (0.94 lb)
556 g (1.23 lb)
CABLE LENGTH
600 mm (23.64 in)
600 mm (23.64 in)
600 mm (23.64 in)
600 mm (23.64 in)
OPERATING TEMP.
-55 C to +80 C
-55 C to +80 C
-55 C to +80 C
-55 C to +80 C
TOOL KITS
CPKI-0000-C0
CPKI-0000-C0
CPKI-0000-C0
CPKI-0000-C0
www.leax.com
Cable clip, M5
Revision A
39
Tool Kits
Tool Kits
PRODUCT PROFILE
The Exir Telecom branded tool kits provide installers all they
COMPLETE TOOL KIT
need for installing grounding kits quickly and easily. Our ground-
ARTICLE
CONTENTS
ing devices require only one small opening in the cable jacket in
CPKI-0000-C1
Cordless, butane powered cutting tool, spare tip and

templates for 1/2, 7/8, 1 1/4 and 1 5/8 cables.
order to function properly. The opening is made using a hot tip

cutting tool together with a simple template. Fully illustrated
SINGLE TOOLS
instructions are included with every grounding kit.
ARTICLE
CONTENTS
EJIG-F012-A0
Template for 1/2 cable
EJIG-F078-A0
Template for 7/8 cable
GTEM-F114-AA00
Template for 1 1/4 cable
GTEM-F158-AA00
Template for 1 5/8 cable
014-12015
Cordless, butane powered cutting tool with spare tip
The complete tool kit includes a cordless, butane powered

cutting tool, one spare tip and templates. Additional cutting
tools and templates can be ordered separately as needed.
Mounting Grounding Kits

1
Note: The above photos illustrate the general installation procedure. Please visit www.exirtelecom.com for complete instructions on how to
install grounding kits from Exir Telecom.
40
P +46 8 752 02 20
www.leax.com
Revision A
Grounding Kit, Lightning Protection for 1/2 Superflexible Foam

Dielectric Cable
Grounding Kit
Lightning Protection for 1/2 Superflexible Foam Dielectric Cable
PRODUCT FEATURES
Reusable
Fits multiple cable brands
PRODUCT PROFILE
Exir Telecom branded grounding kits feature an efficient design enabling
multiple units to be mounted very close together. A simple, adjustable
construction allows for easy attachment to a wide range of cables from
various manufacturers. These grounding kits are reusable.
The contact surfaces are designed to closely fit the corrugated surface
of the outer conductor, thus avoiding unnecessary pressure. As a result,
the effect of grounding on the VSWR measurement of the antenna line
is barely detectable.
ARTICLE
GROU-S012-AA00
CABLE COMPATIBILITY
Acome HPL 50-1/2 SF

Andrew FSJ4-50B
Cablewave S-FLC 12
Leoni FlexLine 1/2 S
NK Cables RFF 1/2-50
GROUND CONN.
Cable clip, M5
CONTACT AREA
>20 mm (0.44 in)
WEIGHT
200 g (0.44 lb)
DIMENSIONS
18 x 27 x 34 mm
HxWxD
(0.71 x 1.06 x 1.34 in)
CABLE LENGTH
600 mm (23.64 in)
OPERATING TEMP.
-55 C to +80 C
www.leax.com
Revision A
41
External Grounding Kits

Lightning Protection for Connectors
External Grounding Kits

Lightning Protection for Connectors
PRODUCT FEATURES
Reusable
Non-corrosive
Made of silver-plated brass and stainless steel
PRODUCT PROFILE
The external grounding kit is designed to be mounted around the connector
and to cause the connector itself to function as a grounding device.
This solution is very easy to install and provides extra protection at the
feeder connector.
ARTICLE
EXGR-F012-AA00
EXGR-F078-AA00
EXGR-F114-AA00
EXGR-F158-AA00
CONNECTOR
xxxx-F012-G1
xxxx-F078-AE02
xxxx-F114-AD00
xxxx-F158-AD00
COMPATIBILITY
xxxx-F012-H1
xxxx-F078-AF00
CONTACT AREA
>25 mm2 (0.04 in2)
>25 mm2 (0.04 in2)
>25 mm2 (0.04 in2)
>25 mm2 (0.04 in2)
CABLE LENGTH
600 mm (23.64 in)
600 mm (23.64 in)
600 mm (23.64 in)
600 mm (23.64 in)
OPERATING TEMP.
-55 C to +80 C
-55 C to +80 C
-55 C to +80 C
-55 C to +80 C
PIECES IN BOX
50
50
50
50
xxxx-F078-AG00
42
P +46 8 752 02 20
www.leax.com
Revision A
Cable Clamps
Exir Telecom branded cable clamps make cable installation easier, saving you
valuable time. Moreover, they provide protection from the damage that high
winds inflict upon improperly fastened cables damage that may lead to in
creased reflection due to mechanical stress. Our cable clamps are manufactured
of corrosion resistant stainless steel and are designed to achieve a perfect dis
tribution of pressure on cables.
We offer cable clamps for use with flat, round and angle tower members, as well
as for wall attachment. Our clamps are convenient to carry and easy to mount
features your installers will appreciate.
Exir branded Cable Clamps

Cable Clamps for Flat (1.5 - 23 mm) and Round (8 - 23 mm) Tower Members
Cable Clamps for 40 mm Angle Tower Members
Cable Clamp Single
Cable Clamp Double
44
P +46 8 752 02 20
www.leax.com
Cable Clamps
for Flat (1.5 - 23 mm) and
Cable
Clamps
Round (8 - 23 mm) Tower Members

For Flat (3-25 mm) and Round (8-25 mm) Tower Members
PRODUCT FEATURES
Made of stainless steel and U.V. resistent Fiberglass P.A.
Fast and easy assembly
Secured with wrench or hex key
Various cable dimensions
Supports up to 5 cable runs
No need for adapters or drilling holes
Minimises utilised space on towers, reducing wind load
Protective interlayers safeguard against cable deformation
For use with 3 - 25 mm (0.12 - 1.0 in) flat and 8 - 25 mm
(0.31 - 1.0 in) round members
Typical usage examples for clamps.
STANDARD CLAMPS
1/2 CABLE
ARTICLE
CABLE
NO. OF CABLES
CL23-1C012-B0
1/2"
CL23-2C012-B0
1/2"
CL23-3C012-B0
1/2"
CL23-4C012-B0
1/2"
CL23-5C012-B0
1/2"
7/8 CABLE
ARTICLE
CABLE
NO. OF CABLES
CL23-1C078-B0
7/8"
CL23-2C078-B0
7/8"
CL23-3C078-B0
7/8"
CL23-4C078-B0
7/8"
CL23-5C078-B0
7/8"
ARTICLE
CABLE
NO. OF CABLES
CL23-1C114-B0
1 1/4"
CL23-2C114-B0
1 1/4"
CL23-3C114-B0
1 1/4"
ARTICLE
CABLE
NO. OF CABLES
CL23-1C158-B0
1 5/8"
CL23-2C158-B0
1 5/8"
CL23-3C158-B0
1 5/8"
1x..
2x..
3x..
4x..
5x..
1 1/4 CABLE
1 5/8 CABLE
44
P +46 8 752 02 20
www.leax.com
Revision A
Cable Clamps
for 40 mm Angle Tower
Cable
Clamps
Members
for
40 mm Angle Tower Members
PRODUCT FEATURES
Made of stainless steel and U.V. resistent Fiberglass P.A.
Various cable dimensions
Secured with wrench or hex key
For use with 40 mm (1.57 in) angle members
No need for adapters or drilling holes
Protective interlayers safeguard against cable deformation
Typical usage examples for clamps.
STANDARD CLAMPS
1/2 CABLE
ARTICLE
CABLE
NO. OF CABLES
CL40-1C012-B0
1/2"
CL40-2C012-B0
1/2"
CL40-3C012-B0
1/2"
CL40-4C012-B0
1/2"
CL40-5C012-B0
1/2"
7/8 CABLE
ARTICLE
CABLE
NO. OF CABLES
CL40-1C078-B0
7/8"
CL40-2C078-B0
7/8"
CL40-3C078-B0
7/8"
CL40-4C078-B0
7/8"
CL40-5C078-B0
7/8"
ARTICLE
CABLE
NO. OF CABLES
CL40-1C114-B0
1 1/4"
CL40-2C114-B0
1 1/4"
CL40-3C114-B0
1 1/4"
ARTICLE
CABLE
NO. OF CABLES
CL40-1C158-B0
1 5/8"
CL40-2C158-B0
1 5/8"
CL40-3C158-B0
1 5/8"
1x..
2x..
3x..
4x..
5x..
1 1/4 CABLE
1 5/8 CABLE
www.leax.com
Revision A
45
Cable Clamp Single
Cable Clamp Single
PRODUCT FEATURES
PRODUCT PROFILE
Cable clamp single is a unit designed for safe simultaneous fixation of
coaxial cables on mountain surface. All components are specially constructed to work as a whole unit to support quick installation. No additional parts for applying are required. All parts are manufactured according to European standards. The clamps are made of environmental
protected plastic which provides UV resistance in all environments.
STANDARD CLAMPS
1/2 CABLE
ARTICLE
CABLE
NO. OF CABLES
CLS0-1C012-A0
1/2"
CLS0-2C012-A0
1/2"
CLS0-3C012-A0
1/2"
CLS0-4C012-A0
1/2"
7/8 CABLE
ARTICLE
CABLE
NO. OF CABLES
CLS0-1C078-A0
7/8"
CLS0-2C078-A0
7/8"
CLS0-3C078-A0
7/8"
CLS0-4C078-A0
7/8"
ARTICLE
CABLE
NO. OF CABLES
CLS0-1C114-A0
1 1/4"
CLS0-2C114-A0
1 1/4"
CLS0-3C114-A0
1 1/4"
CLS0-4C114-A0
1 1/4"
ARTICLE
CABLE
NO. OF CABLES
CLS0-1C158-A0
1 5/8"
CLS0-2C158-A0
1 5/8"
CLS0-3C158-A0
1 5/8"
CLS0-4C158-A0
1 5/8"
1 1/4 CABLE
1 5/8 CABLE
www.leax.com
Revision A
47
Cable Clamp Double
Cable Clamp Double
PRODUCT FEATURES
PRODUCT PROFILE
Cable clamp double is a unit designed for safe simultaneous fixation of coaxial cables on mountain surface. All components are specially constructed
to work as a whole unit to support quick installation. No additional parts
for applying are required. All parts are manufactured according to European standards. The clamps are made of environmental protected plastic
which provides UV resistance in all environments.
STANDARD CLAMPS
1/2 CABLE
ARTICLE
CABLE
NO. OF CABLES
CLD0-2C012-A0
1/2"
CLD0-4C012-A0
1/2"
CLD0-6C012-A0
1/2"
CLD0-8C012-A0
1/2"
7/8 CABLE
ARTICLE
CABLE
NO. OF CABLES
CLD0-2C078-A0
7/8"
CLD0-4C078-A0
7/8"
CLD0-6C078-A0
7/8"
CLD0-8C078-A0
7/8"
ARTICLE
CABLE
NO. OF CABLES
CLD0-2C114-A0
1 1/4"
CLD0-4C114-A0
1 1/4"
CLD0-6C114-A0
1 1/4"
1 1/4 CABLE
1 5/8 CABLE
ARTICLE
48
CABLE
NO. OF CABLES
CLD0-2C158-A0
1 5/8"
CLD0-4C158-A0
1 5/8
CLD0-6C158-A0
1 5/8
P +46 8 752 02 20
www.leax.com
Revision A
Passives
The Exir Telecom branded high performance power splitters and tappers are made
from solid copper and silver-plated to provide the most consistent and reliable electrical specifications. They are water-pressure proof down to 25 metres, which corresponds to a pressure of 2.5 bar and far exceeds the requirements for IP68-classification. This eliminates the need for tape or any other external weatherproofing.
The LEAX range of passives cover all frequencies are rated IP66 and a cost efficient alternative for indoor use.
Exir branded Passives

Tappers, Broadbanded n dB-coupler 380 - 470 and 790 - 2700 MHz
Power Splitters, Hybrid n dB-coupler, 806 - 960 MHz
Power Splitters, Hybrid 3 dB-coupler 1710 - 2170 MHz
3 dB Hybrid, 698 - 2690 MHz
2-Way Power Splitter, 790 - 2700 MHz
3-Way Power Splitter, 790 - 2700 MHz
4-Way Power Splitter. 790 - 2700 MHz
Absorbers, 100 W
Absorbers, 50 W
Absorbers, 25 W
Absorbers, 5 W
LEAX branded Passives

Directional Coupler, 380 - 2700 MHz
Directional Coupler, 698 - 2700 MHz (2 pages)
Wideband Power Splitter, 2/3/4-way, 380-2700 MHz
Wideband Reactive Power Splitter, 2/3/4-way, 698-2700 MHz
Hybrid Coupler, 698-2700 MHz
Attenuator, 2 W - 200 W
Absorbers
100 W
50
P +46 8 752 02 20
www.leax.com
Tappers
Broadbanded n dB-coupler 380 - 470 and 790 - 2700 MHz
PRODUCT FEATURES
Extremely small
In
Very low insertion loss
Out

EPDM O-rings eliminate water intrusion
Out ndB
ARTICLE
DBCM-0602-AA00 /
DBCM-0602-AA01
DBCM-0702-AA00 /
DBCM-0702-AA01
DBCM-1002-AA00 /
DBCM-1002-AA01
DBCM-1302-AA00 /
DBCM-1302-AA01
DBCM-1502-AA00 /
DBCM-1502-AA01
DBCM-2002-AA00 /
DBCM-2002-AA01
CONNECTORS
DIN 7/16 female /

N female
DIN 7/16 female /

N female
DIN 7/16 female /

N female
DIN 7/16 female /

N female
DIN 7/16 female /

N female
DIN 7/16 female /

N female
INPUT POWER
600 / 150 W
600 / 150 W
600 / 150 W
600 / 150 W
600 / 150 W
600 / 150 W
PIECES IN BOX
As requested / 50
As requested / 50
As requested / 50
As requested / 50
As requested / 50
As requested / 50
FREQUENCY RANGE
380 - 470 MHz
380 - 470 MHz
380 - 470 MHz
380 - 470 MHz
380 - 470 MHz
380 - 470 MHz
790 - 2700 MHz
790 - 2700 MHz
790 - 2700 MHz
790 - 2700 MHz
790 - 2700 MHz
790 - 2700 MHz

-28 dB (0.15 % of Pin)
COUPLING ATTENUATION
380 - 470 MHz
-9 dB (13 % of Pin)
-10 dB (10 % of Pin)
-15 dB (3 % of Pin)
-17 dB (2 % of Pin)
-21 dB (0.8 % of Pin)
790 - 2700 MHz
-6 dB (25 % of Pin)
-7 dB (20 % of Pin)
-10 dB (10 % of Pin)
-13 dB (5 % of Pin)
-15.1 dB (3 % of Pin)
-20 dB (1 % of Pin)
OUTPUT PERCENTAGE
25 % / 75 %
20 % / 80 %
10 % / 90 %
5 % / 95 %
3 % / 97 %
1 % / 99 %
380 - 470 MHz
1.5 / 14 dB
1.5 / 15 dB
1.22 / 20 dB
1.12 / 25 dB
1.12 / 25 dB
1.12 / 25 dB
790 - 2700 MHz
1.5 / 14 dB
1.5 / 15 dB
1.22 / 20 dB
1.12 / 25 dB
1.12 / 25 dB
1.12 / 25 dB
INSERTION LOSS
-0.05 dB
-0.05 dB
-0.05 dB
-0.05 dB
-0.05 dB
-0.05 dB
IMPEDANCE
50 ohm
50 ohm
50 ohm
50 ohm
50 ohm
50 ohm
VSWR / RETURN LOSS
INTERMODULATION*
2 x 20 transmitter
< -156 dBc
< -156 dBc
< -156 dBc
< -156 dBc
< -156 dBc
< -156 dBc
WEIGHT
350 g (0.76 lb)
350 g (0.76 lb)
350 g (0.76 lb)
350 g (0.76 lb)
350 g (0.76 lb)
350 g (0.76 lb)
DIMENSIONS
72 x 78 x 25 mm
72 x 78 x 25 mm
72 x 78 x 25 mm
72 x 78 x 25 mm
72 x 78 x 25 mm
72 x 78 x 25 mm
HxWxD
(2.84 x 3.06 x 0.97 in)
(2.84 x 3.06 x 0.97 in)
(2.84 x 3.06 x 0.97 in)
(2.84 x 3.06 x 0.97 in)
(2.84 x 3.06 x 0.97 in)
(2.84 x 3.06 x 0.97 in)
www.leax.com
Revision C
51
Power Splitters, Hybrid n dB-coupler, 806 - 960 MHz
Power Splitters
Hybrid n dB-coupler, 806 - 960 MHz
COMBINING SIGNALS
FROM TWO TX / RXs
Out
In
In
Absorber
SPLITTING SIGNALS
FROM ONE TX / RX
In
Out
PRODUCT FEATURES
Extremely good VSWR
Out
SPLITTING SIGNALS
FROM TWO TX / RXs
In
Out
COMMON FOR ALL

INPUT POWER
700 W
FREQUENCY RANGE
806 - 960 MHz
VSWR / RETURN LOSS
1.06 / -31 dB
ISOLATION
-33 dB
IMPEDANCE
50 ohm
WEIGHT
2000 g (4.4 lb)
OPERATING TEMP.
-55 C to +80 C
DIMENSIONS
135 x 90 x 50 mm
HxWxD
(5.32 x 3.55 x 1.96 in)
Absorber
Out
52
In
ARTICLE
DBCM-0305-AA00
DBCM-0605-AA00
DBCM-1005-AA00
DBCM-1305-AA00
CONNECTORS
DIN 7/16 female
DIN 7/16 female
DIN 7/16 female
DIN 7/16 female
COUPLING ATTENUAT.
3 dB 0.1
6 dB 0.3
10 dB 0.3
13 dB 0.3
OUTPUT PERCENTAGE
50% / 50%
25% / 75%
10% / 90%
5% / 95%
P +46 8 752 02 20
www.leax.com
Revision A
Power
Splitters,
Hybrid 3 dB-coupler 1710 Power
Splitters
2170 MHz
Hybrid 3 dB-coupler 1710 - 2170 MHz
COMBINING SIGNALS
FROM TWO TX / RXs
Out
In
In
Absorber
SPLITTING SIGNALS
FROM ONE TX / RX
In
Out
PRODUCT FEATURES
Extremely small
Very low insertion loss
Out
COMMON FOR ALL
SPLITTING SIGNALS
FROM TWO TX / RXs
In
Out
FREQUENCY RANGE
1710 - 2170 MHz
COUPLING ATTENUAT.
3 dB 0.15
OUTPUT PERCENTAGE
50% / 50%
RETURN LOSS
-25 dB
ISOLATION
-28 dB
IMPEDANCE
50 ohm
WEIGHT
1500 g (3.3 lb)
OPERATING TEMP.
-55 C to +80 C
DIMENSIONS
96 x 95 x 50 mm
HxWxD
(3.78 x 3.74 x 1.96 in)
Out
ARTICLE
DBCM-1722-AA01
DBCM-1722-AB01
CONNECTORS
DIN 7/16 female
N female
INPUT POWER
600 W
150 W
Absorber
www.leax.com
In
Revision A
53
3 dB Hybrid, 790-2700 MHz
3 dB Hybrid
698 - 2690 MHz
PRODUCT FEATURES
High Performance
High Reliability
Low Noise Figure
ROHS Compliant
IP67-classified
ARTICLE
DBCM-0727-AA00
DBCM-0727-AA01
ELECTRICAL
698 - 2690 MHz
FREQUENCY RANGE
0.8 dB
INSERTION LOSS
3.1 dB
COUPLING VALUE
VSWR
1.3:1 Max
ISOLATION
18 dB Min
50 W
POWER HANDLING
PIM (3rd Order 2*43dBm)
-150 dBc typical
IN/OUT IMPEDANCE
50 Ohm nominal
ENVIRONMENTAL
-20 to +70 C
MECHANICAL
DIMENSIONS H x W x D
HYBRID
270 x 64 x 33 mm
(10.63 x 2.52 x 1.30 in)
270 x 57 x 52 mm
(10.63 x 2.24 x 2.04 in)
BRACKET
100 x 114 x 12 mm
(3.94 x 4.49 x 0.47 in)
100 x 114 x 12 mm
(3.94 x 4.49 x 0.47 in)
RF CONNECTOR
N (F)
7/16 (f)
FINISH
54
Grey colour epoxy coating
P +46 8 752 02 20
www.leax.com
Revision B
2-Way
Power
Splitter,
790 - 2700 MHz
2-Way
Power
Splitter
790 - 2700 MHz
PRODUCT FEATURES
Made from silver-plated brass
ARTICLE
AT2G-716F-AB00
AT2G-00NF-AB00
FREQUENCY RANGE
790 - 2700 MHz
790 - 2700 MHz
790 - 960 MHz
1000 W
300 W
1700 - 2200 MHz
700 W
150 W
2500 - 2700 MHz
500 W
100 W
CONNECTORS
DIN 7/16 female
N female
INPUTS/OUTPUTS
1/2
1/2
VSWR / RETURN LOSS
1.17 / -22 dB
1.17 / -22 dB
INSERTION LOSS
<0.05 dB
<0.05 dB
Side view
Out
INPUT POWER
Out
INTERMODULATION
< -156 dBc
< -156 dBc
IMPEDANCE
50 ohm
50 ohm
WEIGHT
500 g (1.1 lb)
500 g (1.1 lb)
55 C to +80 C
55 C to +80 C
DIMENSIONS
225 x 84 x 28 mm
240 x 92 x 28 mm
HxWxD
(8.85 x 3.30 x 1.10 in)
(9.44 x 3.62 x 1.10 in)
PIECES IN BOX
10
10
In
www.leax.com
Revision A
55
3-Way
Power
Splitter,
790 - 2700
3-Way
Power
Splitter
MHz
790 - 2700 MHz
PRODUCT FEATURES
Side view

ARTICLE
AT3G-716F-AB00
AT3G-00NF-AB00
FREQUENCY RANGE
790 - 2700 MHz
790 - 2700 MHz
790 - 960 MHz
1000 W
300 W
1700 - 2200 MHz
700 W
150 W
2500 - 2700 MHz
500 W
100 W
CONNECTORS
DIN 7/16 female
N female
INPUTS/OUTPUTS
1/3
1/3
VSWR / RETURN LOSS
1.17 / -22 dB
1.17 / -22 dB
INSERTION LOSS
<0.05 dB
<0.05 dB
< -156 dBc
< -156 dBc
IMPEDANCE
50 ohm
50 ohm
WEIGHT
500 g (1.1 lb)
500 g (1.1 lb)
55 C to +80 C
55 C to +80 C
DIMENSIONS
235 x 90 x 68 mm
245 x 111 x 78 mm
HxWxD
(9.3 x 3.6 x 2.7 in)
(9.7 x 4.4 x 3.1 in)
PIECES IN BOX
10
10
Out
Out
INPUT POWER
In
INTERMODULATION
56
P +46 8 752 02 20
Top view
3 OUTPUTS
33% Pout
33% Pout
33% Pout
www.leax.com
Revision B
4-Way Power Splitter

790 - 2700 MHz
PRODUCT FEATURES
Side view

Out
ARTICLE
AT4G-716F-AB00
AT4G-00NF-AB00
FREQUENCY RANGE
790 - 2700 MHz
790 - 2700 MHz
790 - 960 MHz
1000 W
300 W
1700 - 2200 MHz
700 W
150 W
2500 - 2700 MHz
500 W
100 W
CONNECTORS
DIN 7/16 female
N female
INPUTS/OUTPUTS
1/4
1/4
VSWR / RETURN LOSS
1.17 / -22 dB
1.17/ -22 dB
INSERTION LOSS
<0.05 dB
<0.05 dB
< -156 dBc
< -156 dBc
IMPEDANCE
50 ohm
50 ohm
WEIGHT
500 g (1.1 lb)
500 g (1.1 lb)
55 C to +80 C
55 C to +80 C
DIMENSIONS
235 x 90 x 90 mm
245 x 111 x 111 mm
HxWxD
(9.3 x 3.6 x 3.6 in)
(9.7 x 4.4 x 4.4 in)
PIECES IN BOX
10
10
Out
INPUT POWER
In
Top view
INTERMODULATION
4 OUTPUTS
25% Pout
25% Pout
25% Pout
25% Pout
www.leax.com
Revision B
57
Absorbers, 100 W
Absorbers
100 W
PRODUCT FEATURES
Rohs compliant
COMMON FOR BOTH

FREQUENCY RANGE
0 - 3000 MHz
INPUT POWER (at 25 C)
100 W
IMPEDANCE
50 ohm
RETURN LOSS
58
0 - 1000 MHz
35 dB
1000 - 2500 MHz
32 dB
2500 - 3000 MHz
18 dB
-55 C to +80 C
DIMENSIONS
125 x 135 x 125 mm
HxWxD
(4.93 x 5.32 x 4.93 in)
WEIGHT
2400 g (5.28 lb)
ARTICLE
LDB0-0100-A0
LDB0-0100-B0
LDB0-0100-C0
LDB0-0100-D0
CONNECTOR
DIN 7/16 female
DIN 7/16 male
N female
N male
P +46 8 752 02 20
www.leax.com
Revision B
Absorbers, 50 W
Absorbers
50 W
PRODUCT FEATURES
Rohs compliant
Available with BNC
COMMON FOR BOTH

FREQUENCY RANGE
DC 4000 MHz
50 W
PEAK POWER
5 kW
IMPEDANCE
50 ohm 2%
RETURN LOSS
0 - 2000 MHz
26 dB
2000 - 4000 MHz
20.8 dB
-55 to +125C
DIMENSIONS
72 x 50 x 94 mm
HxWxD
(2.83 x 1.97 x 3.7 in)
WEIGHT
540 g (1.19 lb)
ARTICLE
LDB0-0050-A0
LDB0-0050-B0
CONNECTOR
DIN 7/16 female
DIN 7/16 male
www.leax.com
Revision B
59
Absorbers, 25 W
Absorbers
25 W
PRODUCT FEATURES
Rohs compliant
COMMON FOR BOTH

FREQUENCY RANGE
0 - 3000 MHz
25 W
IMPEDANCE
50 ohm
RETURN LOSS
60
0 - 1000 MHz
35 dB
1000 - 2500 MHz
32 dB
2500 - 3000 MHz
18 dB
-55 C to +80 C
DIMENSIONS
65 x 58 x 122 mm
HxWxD
(2.56 x 2.28 x 4.80 in)
WEIGHT
820 g (1.8 lb)
ARTICLE
LDB0-0025-AE00
LDB0-0025-AF00
LDB0-0025-AG00
LDB0-0025-AH00
CONNECTOR
DIN 7/16 female
DIN 7/16 male
N female
N male
P +46 8 752 02 20
www.leax.com
Revision B
Absorbers, 5 W
Absorbers
5W
PRODUCT FEATURES
Rohs compliant
COMMON FOR BOTH

FREQUENCY RANGE
0 - 3000 MHz
5W
IMPEDANCE
50 ohm
RETURN LOSS
0 - 1000 MHz
35 dB
1000 - 2500 MHz
32 dB
2500 - 3000 MHz
18 dB
-55 C to +80 C
DIMENSIONS
Length 72 - 74 mm (2.84 - 2.91 in)

32 mm (1.25 in)
WEIGHT
180 g (0.39 lb) - 185 g (0.40 lb)
ARTICLE
LDB0-0005-A0
LDB0-0005-B0
LDB0-0005-C0
LDB0-0005-D0
CONNECTOR
DIN 7/16 female
DIN 7/16 male
N female
N male
www.leax.com
Revision A
61
Directional Coupler
380 - 2700 MHz
PRODUCT FEATURES
Operating frequency range from 380 - 2700 MHz.
6, 10, 15, 20 & 30 dB coupling value.
300 W average main line power handling capability.
Suitable for both indoor and outdoor applications.
Low PIM
RoHS Compliant.
TECHNICAL SPECIFICAtiONS
ELECTRICAL
DCXX-0327-CA01
380 - 2700 MHz
Frequency Range
Directional Coupler
Input Power
6,10,15,20,30dB,380-2700MHz, N-Female, 300W

Coupling
Value
6 dB
DC-FR06-ON300C(H),
DC-FR10-ON300C(H),
DC-FR15-ON300C(H), DC-FR20-ON300C(H),
Coupling tolerance
0.8 dB
DC-FR30-ON300C(H)
insertion loss
1.7 dB
300 W
10 dB
15 dB
20 dB
30 dB
1.0 dB
1.2 dB
1.5 dB
1.5 dB
0.8 dB
0.45 dB
0.22 dB
0.2 dB
Features and Product Description

Isolation
> 18 dB
Operating frequency range from 380-2700MHz.

Input port VSWR
6, 10,15,20 & 30 dB coupling value.
300Watt average main line power handling capability.
PIM
Suitable for both
indoor and outdoor applications.
Low PIM
impedance
RoHS Compliant.
Technical Specifications
MechanicalDC-FR06Electrical
ON300C(H)
Frequency Range
MHz
Dimensions,
(L x W
Input Average Power
W
Coupling Value
dB
6
Coupling tolerance weight
dB
0.8
Insertion Loss
dB
1.7
Isolation
dB
material
Input port VSWR
PIM
dBc
Inner
Plating
Impedance
< 1.25
-140 dBc @ 2x43 dBm
50 Ohm
DC-FR10ON300C(H)
x H)
10
1.0
0.8
DC-FR15DC-FR20DC-FR30ON300C(H)
ON300C(H)
ON300C(H)
380 2700
268
x
62
x
23
mm
(10.6
x 2.4 x
300
15
20
30
0.4 kg (0.9 lb)1.8
1.2
1.5
0.45
0.22
0.2
> 18
Aluminum
< 1.25
-150 @2x43dBm
Silver
50
Mechanical connector type

Dimension, LxWxH
mm
(in)
Operational
Temperature
kg
(lb)
Operational Humidity
Material
Inner Plating
Environmental Class
Connector Type
o
Temperature Range
C
Humidity
%
Environmental Class
Weight
OUTLINE DRAWING
0.9 in)
N-Female
268x62x23 (10.6x2.4x0.9)
-40 to +80C
0.4 (0.9)
Aluminum
Silver
N-Female
-40 to +80
< 95
Indoor/Outdoor IP65
< 95%
Indoor/Outdoor IP65
Outline Drawing
)5;6
/4
62
5;:
P +46 8 752 02 20
www.leax.com
Revision A
Page 1 (2)
Directional Coupler
698 - 2700 MHz
Directional Coupler
DC-Rxx-ON200M, DC-Rxx-OD200M

Designed for operating in wide frequency band from 698-2700MHz.
200W power handling capability.
PRODUCT FEATURES
Low loss and good PIM performance.
Available
in 7/16 DIN or N-type connector.
Wideband designed for operating in all frequency
bands from
698 - 2700 MHz.
200 W power handling capability.

ional Coupler
Low loss, flat coupling and high inter-modulation.
-ON200M, DC-Rxx-OD200M
Available with 7/16 DIN or Type N connector.Electrical
Coupling Value
nical Specifications
Main Line Loss
cy Range
wer
g Value
e Loss
ty
rt VSWR
5dB
MHz
Input W
port VSWR
dB
50.8
PIM
dB
2.3
dB
impedance
dBc
Mechanical
nce
anical
on,
DIRECTIVITY
Dimensions, (L x W x H)
Type N-F
mm (in)
7/16 DIN-F weight
Type N-F
kg (lb)
7/16 DIN-F material
ature Range
y
mental Class
dBc
10 dB
698 - 2700 MHz
8 dB
Aluminum
-25 to +75C
-25 to +75
< 95%
< 95
Indoor/Outdoor IP65Indoor/Outdoor IP65
C
Operational
Humidity
%
8dB
10dB
698-2700
200
50.8
60.8
70.8
80.8
101
2.3
1.7
1.5
1.2
0.8
> 20
< 1.25
13 dB
15 dB
20
dB-140 @2x43dBm
50
Dimension, Type N-F 200 W

mm (in)
7/1680.8
DIN-FdB
50.8 dB
60.8LxWxH
dB
70.8 dB
101 dB
131 dB
151 dB
Type N-F
Weight 1.5
kg
(lb)
2.3
1.7
1.2
0.8
0.5
0.4
7/16 DIN-F
6dB
7dB
8dB
10dB
13dB
15dB
20dB
Material
> 20 o
698-2700
Temperature
Range
C
< 1.25%
Humidity 200
60.8
70.8 Environmental
80.8
101
131
151
201
Class -140
@2x43dBm
1.7
1.5
1.2
0.8
0.5
0.4
0.3
> 20
50 Ohm
Outline
Drawing
< 1.25
-140 @2x43dBm
50
115
Type N-F: 141 x 55 x 23 mm (5.6 x 2.2 x 0.9 in)
7/16 DIN-F: 156 x 66 x 36 mm (6.1 x 2.6 x 1.4 in)
141x55x23 (5.6x2.2x0.9)
Type N-F: 0.30 kg (0.7 lb)
156x66x36 (6.1x2.6x1.4)
7/16 DIN-F: 0.75 kg (1.7 lb)
0.30 (0.7)
Aluminum
0.75 (1.7)
Operational
Temperature
o
7dB
13dB
15dB
131
0.5
151
0.4
141x55x23 (5.6x2.2x0.9)
156x66x36
(6.1x2.6x1.4)
201
dB
0.30 (0.7)
0.3 0.75 (1.7)
Aluminum
-25 to +75
< 95
Indoor/Outdoor IP65
5
4.
15
rical
6dB
55
Mechanical
Input Power
5dB
MHz
W
dB
dB
dB
37
Frequency Range
Suitable
for both outdoor and indoor application.
res and Product
Description
Input Power
Coupling Value
Main Line Loss
igned for operating in wide frequency band from 698-2700MHz.
Directivity
W power handlingTECHNICAL
capability.
Input port VSWR
loss and good PIM performance.
PIM
ELECTRICAL
5 dB
6 dB
7 dB
ilable in 7/16 DIN or N-type connector.
Impedance
Frequency
Range
able for both indoor
and outdoor
applications.
Environmental Class
23
105
141
ne Drawing OUTLINE DRAWING

115
5
5.
44
15
37
36
55
66
5
4.
23
105
141

5
112
156
www.leax.com
36
Revision A
63
Page 2 (2)
Directional Coupler
698 - 2700 MHz
Directional Coupler
DC-Rxx-ON200M, DC-Rxx-OD200M
PRODUCT FEATURES
Wideband designed for operating in all frequency bands
Designed for operating in wide frequency band from 698-2700MHz.

200W power handling capability.
Low loss and good PIM performance.
Low loss, flat coupling and high inter-modulation.
Available in 7/16 DIN or N-type connector.
Available with 7/16 DIN or Type N connector. Suitable for both indoor and outdoor applications.
from 698 - 2700 MHz.
200 W power handling capability.
Suitable for both outdoor and indoor application.

ional Coupler
-ON200M, DC-Rxx-OD200M
TECHNICAL
Electrical
res and Product

Description
ELECTRICAL
30dB
30Frequency
dB
Range
40 dB
MHz
W
dB
dB
dB
Input Power
698 - 2700 MHz
Coupling Value
igned for operating
in
wide
frequency
band
from
698-2700MHz.
Main Line Loss
Input Power
200 W
Isolation
W power handling capability.
Coupling Value
301.2
dB
401.5 dB
Input port VSWR
loss and good PIM performance.
PIM
Main
Line
Loss
0.2
dB
ilable in 7/16 DIN or N-type connector.
Impedance
able for both indoor
and outdoor applications.
Isolation
< 33
> 43
Frequency Range
nical Specifications
impedance
Mechanical
Dimensions, (L x W x H)
rt VSWR
MHz
W
dB
dB
dB
weight
dBc
material
nce
Operational Temperature
anical
7/16 DIN-F
Type N-F
7/16 DIN-F
Type N-F
40dB
< 95%
156x70x36
(6.1x2.8x1.4)
141x59x23
(5.6x2.3x0.9)
Indoor/Outdoor IP65
0.85 (1.9)
0.40 (0.9)
Aluminum
-25
+65
N-F to
Type
< 95
DCXX-0627-CA01
Indoor/Outdoor
IP65
> 43
< 1.25
-140 @2x43dBm
50
156x70x36 (6.1x2.8x1.4)
141x59x23 (5.6x2.3x0.9)
0.85 (1.9)
0.40 (0.9)
Aluminum
-25 to +65
< 95
Indoor/Outdoor IP65
mm (in)
kg (lb)
o
C
%
115
4.
15
Ordering Information
nal Temperature
nal Humidity
mental Class
> 33
dBc
50 Ohm
Weight
30dB
Material
698-2700
200
Type N-F:301.2
141 x 59 x 23 mm (5.6 x 2.3 x 0.9 in)401.5
Environmental Class
7/16 DIN-F: 156 x 70 x 36 mm(6.1
0.2x 2.8 x 1.4 in)
> 33
> 43
Type
N-F: 0.40 kg (0.9 lb)
Ordering
Information
< (1.9
1.25lb)
7/16 DIN-F: 0.85
kg
-140 @2x43dBm
Aluminum
50
-25 to +65C
Operational
7/16
DIN-F Humidity
mm (in)
Type
N-F
Environmental Class
7/16 DIN-F
kg (lb)
Type N-F
on, LxWxH
401.5
0.2
41
59
PIM
cy Range
wer
g Value
e Loss
301.2
Mechanical
< 1.25
Dimension, LxWxH
-140 @2x43dBm
Input port VSWR
rical
40dB
698-2700
200
C
7/16 Din Type
%
DCXX-0627-CA00
105
23
141
OUTLINE DRAWING
ring Information
115
15
48
40
70
5
5.
41
59
4.
105
23
141
64

5
5.
P +46 8 752 02 20
112
156
www.leax.com
36
Revision A
Wideband Power Splitter, 2/3/4-way, 380-2700 MHz
Wideband Power Splitter
Wideband
Power Splitter
2/3/4-way,
380 - 2700 MHz
2/3/4way,380-2700MHz, N-Female, 500W
PS-FR2-ON500C(H), PS-FR3-ON500C(H),
PS-FR4-ON500C(H)
Wideband covering 380-2700MHz.

PRODUCT
FEATURES
500Watt
input power
handling capability..
Suitable
both indoor
outdoor
applications.
for
Wideband
coveringand
380-2700
MHz
Low PIM
500
W
input
power
handling
capability
High reliability.
RoHS Compliant.
Suitable for both indoor and outdoor applications
Low PIM
Technical
Specifications
High
reliability
RoHS Compliant
Electrical
No. of Ways
TECHNICAL
Frequency Range
ELECTRICAL
Average Power,
maximum
Splitting Loss
No. of Ways
VSWR
Frequency Range
3rd Order Intermodulation
@ 2 43dBm Carrier
Impedance Average Power, maximum
PS-FR2-ON500C(H)
3-way
MHz
380 2700
AT2G-0327-CA01
AT3G-0327-CA01500
W
dB
3.3
5.1
2-way
3-way
< 1.20 : 1
< 1.25 : 1
380 - 2700MHz
dBc
-150
500 W 50
Splitting Loss
Mechanical
VSWR
Dimension, LxWxH
@ 2 43 dBm Carrier
Weight
Impedance
Material
Inner PlatingMechanical
Operational Dimensions,
Temperature
(L x W x H)
Environmental Class
PS-FR3-ON500C(H)
2-way
3.3 dB
5.1 dB
mm< 1.20 : 1 479x61x25

(in)
kg
(lb)
(18.9x2.4x1.0)
(19.6x2.4x1.0)
-150
0.67
C x 61 x 25 mm
479
% x 2.4 x 1.0 in)
(18.9
weight
< 1.25 : 1 497x61x25
0.67 kg
50 Ohm 0.7
4-way
AT4G-0327-CA01
6.4
< 1.25 : 1
4-way
6.4 dB
< 1.25
:1
497x61x43
(19.6x2.4x1.0)
0.75
Aluminum
Silver
497 x 61 x 25-40
mm to +80
497 x 61 x 43 mm
< 95
(19.6 x 2.4 x 1.0 in)
(19.6 x 2.4 x 1.0 in)
Indoor/Outdoor IP65
0.7 kg
0.75 kg
Aluminium
Material
Outline Drawing
Inner Plating
PS-FR4-500C(H)
Silver
-40 to +80C
95%
Environmental Class
Indoor/Outdoor IP65
OUTLINE DRAWING
www.leax.com
Revision A
65
Wideband Reactive Power Splitter
Wideband2/3/4-way,
Reactive Power
Splitter
698
- 2700 MHz
/3/4way,698-2700MHz, N-Female, 500W
S-R2-ON500C(H),PS-R3-ON500C(H),PS-R4-ON500C(H)
PRODUCT FEATURES
Wideband covering 698 - 2700 MHz
500 W input
power handling capability
Wideband
covering
698-2700MHz.
500Watt input
power
handling
capability.
Suitable for both indoor
and outdoor applications
Low loss, flat response and even output.
High reliability
High reliability.
RoHS Compliant.
RoHS Compliant
TECHNICAL
Electrical
ELECTRICAL
NO. OF WAYS
No. of Ways
Frequency Range
FREQUENCY RANGE
Average Power, maximum
AVERAGE POWER, MAXIMUM
Peak Power
Splitting Loss PEAK POWER
In-band Ripple SPLITTING LOSS
Insertion loss IN-BAND RIPPLE
Input Port VSWR
INSERTION LOSS
PIM
INPUT PORT VSWR
Impedance
AT2G-0627-CA01
PS-R2-ON500C(H)
2-way 2-way
MHz
W
W
dB
dB
dB
3-way3-way
4-way
4-way
500
3000
3000
W
5.0
5.0 dB 0.2
0.1
0.2
dB
< 1.20
0.1 dB
-150 @2x43dBm
< 1.20
50
500 W
3.1
3.1 dB
dBc
6.3
6.3 dB
-150 dBc @2x43dBm
PIM
Dimension, LxWxH
Weight
MECHANICAL
Material
Inner Plating DIMENSIONS, (L x W x H)
Connector TypeWEIGHT
MATERIAL
Mounting
INNER PLATING
Environmental Class
CONNECTOR TYPE
AT4G-0627-CA01
PS-R4-ON500C(H)
698698-2700
- 2700 MHz
Mechanical
IMPEDANCE
AT3G-0627-CA01
PS-R3-ON500C(H)
mm
kg
214.8 x 60.6 x 25 mm
o
50 Ohm
214.8x60.6x25
0.35
OPERATIONAL TEMPERATURE
Outline Drawing
MOUNTING
0.35 kg
269.4x60.6x25
270.6x60.6x42.8
0.41
0.47
Aluminum
269.4 x 60.6 xSilver
25 mm
270.6 x 60.6 x 42.8 mm
0.41N-Female
kg
0.47 kg
-40 to +80
Aluminium
Wall mounted bracket provided
Silver
< 95
Indoor/Outdoor
IP65
N-Female
-40 to +80C
Wall mounted bracket provided
OPERATIONAL HUMIDITY
95%
ENVIRONMENTAL CLASS
Indoor/Outdoor IP65
OUTLINE DRAWING
www.leax.com
Revision A
65
Wideband
Reactive Power
Splitter
Wideband
Reactive
Power Splitter
2/3/4way,698-2700MHz, Din-Female, 500W
2/3/4-way, 698 - 2700 MHz
PS-R2-OD500C(XH),PS-R3-OD500C(XH),PS-R4-OD500C(XH)
.
500Watt input power handling capability.

LowPRODUCT
loss, flatFEATURES
response and even output.
500 W input power handling capability
High reliability.
Compliant.
Suitable for both indoor and outdoor applications
RoHS
High reliability
RoHS Compliant
Electrical
PS-R2-OD500C(XH)
PS-R3-OD500C(XH)
PS-R4-OD500C(XH)
2-way
3-way
4-way
TECHNICAL
No. of Ways
ELECTRICAL
Frequency
Range
Average NO.
Power,
maximum
OF WAYS
Peak Power
FREQUENCY RANGE
Splitting Loss
In-band AVERAGE
Ripple POWER, MAXIMUM
InsertionPEAK
lossPOWER
Input Port
VSWR
SPLITTING LOSS
PIM
IN-BAND RIPPLE
Impedance
INSERTION LOSS
Mechanical
INPUT PORT VSWR
Dimension, LxWxH
PIM
Weight
Material IMPEDANCE
Inner Plating
Connector
Type
MECHANICAL
Operational
Temperature
DIMENSIONS, (L x W x H)
WEIGHT Class
Environmental
AT2G-0627-CA00
MHz
W 2-way
W
dB
dB
dB
AT3G-0627-CA00698-2700
500
4-way
1500
698 - 2700 MHz
4.8
6.0
500 W
0.3
0.4
1500 W 0.3
< 1.22
4.8 dB
6.0 dB
-153 @2x43dBm 0.4 dB
50
3-way
3.0
3.0 dB
dBc
AT4G-0627-CA00
0.3 dB
0.3 dB
< 1.22
mm
kg
229.9x81.4x38
248.1x81.4x38
270.6x80.2x38
-153 dBc @2x43dBm
1.1
1.2
1.3
50 Ohm Aluminum
Silver
Din-Female
o
C
-35 to +65
229.9 x 81.4 x 38 mm
248.1 x 81.4 x 38 mm
270.6 x 80.2 x 38 mm
%
< 95
1.1 kg
1.2 kgIndoor/Outdoor IP65 1.3 kg
MATERIAL
Aluminium
INNER
PLATING
Outline
Drawing
Silver
Din-Female
CONNECTOR TYPE
-35 to +65C
OPERATIONAL HUMIDITY
95%
ENVIRONMENTAL CLASS
Indoor/Outdoor IP65
OUTLINE DRAWING
66
P +46 8 752 02 20
www.leax.com
Revision A
Hybrid Coupler, 698-2700 MHz
Hybrid Coupler
698 - 2700 MHz
Hybrid Coupler
HC-R-ON150L, HC-R-OD150L
oupler
Designed for operating in wide frequency band 698-2700MHz.

Compact and cost effective solution for combining two bands.
Low insertion loss and good PIM performance.
Integrating two operators services into an existing in-building antenna distribution
system.
PRODUCT FEATURES
50L, HC-R-OD150L
Designed for operating in wide frequency band 698 - 2700 MHz.
Technical
Specification
Description
Compact and cost effective
solution for
combining two bands.
s and Product
Low insertion loss andElectrical
good PIM performance.
Frequency Range
d for operating in wide frequency band 698-2700MHz.
Integrating two operators
into an
existing
Inputservices
Avg. Power,
max
at eachin-building
port
t and cost effective solution for combining two bands.
Insertion Loss
ertion loss and good PIM
performance.
antenna
distribution system.
Coupling Value
ting two operators services into an existing in-building
distribution
Coupling antenna
Tolerance
Isolation between Bands
VSWR
Impedance
TECHNICAL
Mechanical
Mechanical
ELECTRICAL
Mechanical
7/16 DIN-F
Type N-F
698 - 2700 MHz
7/16 DIN-F
Weight
al
Type
N-F port
Input Power
150 W max
at each
ange
MHz
698-2700
Material
LOSS W
0.2
dB
ower, max at each INSERTION
port
150
ss
dB
0.2
Coupling Value dB
3.1 dB 3.1
ue
Environmental Class
erance
dB
0.5
Coupling Tolerance
0.5 dB
ween Bands
dB
23*
ISOLATION BETWEEN BANDS
23* 1.2*
Outline Drawing
50
al Specification
Frequency Range
Dimension, LxWxH
impedance
7/16 DIN-F
mm (in)
Type N-F
* Valid if all ports are terminated with 50 load.
7/16 DIN-F
kg (lb)
Type N-F
Temperature
Humidity
tal Class
o
C
7/16 Din%Type
DBCM-0627-CA00
Drawing
kg (lb)
Type N-F
weight
C
%
7/16 DIN-Female
Type N-F
Aluminum
MATERIAL
-25 to +65C
50 Ohm (5.2x3.5x1.5)
133x90x38
133x76x25 (5.2x3.0x1.0)
Environmental Class
1.0 (2.2) 4.5
0.5 (1.1)
125
Aluminum
-25 to +65
< 95
N Type
83
Indoor/Outdoor (IP65)
25
133 50 load
* Valid
if all ports are terminated with
DBCM-0627-CA01
< 95%
OUTLINE DRAWING
4 .5
40
76
125
83
133
125
25
83
133
P +46 8 752 02 20
38
www.leax.com
Information contained in this document is subject to confirmation at time of ordering.

0
68
133x90x38 (5.2x3.5x1.5)
133x76x25 (5.2x3.0x1.0)
133 x 90 x 38 mm (5.2 x 3.5 x 1.5 in)
1.0 (2.2)
0.5133
(1.1)
x 76 x 25 mm (5.2 x 3.0 x 1.0 in)
Aluminum
-25 to +65
< 95
1.0 kg (2.2 lb)
* Valid if all ports are terminated
withlb)50 load
0.5 kg (1.1
90
LxWxH
7/16 DIN-Female
47
ical
mm (in)
1.2*
VSWR
698-2700
150
0.2
3.1
0.5
23*
1.2*
50
40
76
TECHNICAL
MHz
W
dB
dB
dB
dB
Revision A
Issued: Jul09
Attenuator
2 W - 200 W
PRODUCT FEATURES
Used in absorbing energy of transmission line
Wide Frequency Band
Low VSWR
High reliability
RoHS Compliant
MODEL NUMBER
AVERAGE
PEAK
POWER (W) POWER (KW)
MAX
VSWR
NOMINAL ATTENUATION
VALUE (DB)
CONNECTOR
TYPE
DIMENSIONS
(MM)
WEIGHT
(G)
FREQUENCY
RANGE (GHZ)
AT02-0/10DB-NF/NF
(Adjustable Attenuator With
N Female Connector)
0.5
1.50
0~10 dB Adjustable
106 x 35 x 20
110
DC~3
AT02-XXDB-NM/NF
0.5
1.20
1~40
20 x 70
65
DC~3
AT02-XXDB-SM/SF
0.5
1.15
1~30
SMA
10 x 30
10
DC~3
AT05-XXDB-NM/NF
0.5
1.20
1~40
20 x 70
65
DC~3
AT05-XXDB-SM/SF
0.5
1.20
1~40
SMA
20 x 70
65
DC~3
AT10-XXDB-NM/NF
10
1.20
1~40
38 x 83
120
DC~3
AT25-XXDB-NM/NF
25
1.20
1~50
38 x 83
120
DC~3
510
or 325
DC~3
50
10
1.30
1~40
130 x 60 x 60
or 63 x 112
AT100-XXDB-NM/NF
100
10
1.30
1~50
230 x 80 x 60
1800
DC~3
AT200-XXDB-NM/NF
200
10
1.35
1~50
267 x 98 x 60
2800
DC~3
AT50-XXDB-NM/NF
Note:
Dimension Tolerance is 2%, it refer to connector type N unless otherwise specified.
Custom designs available. Connector type (DIN, N, SMA); Low PIM; IP rating.etc.
Operating Temperature: -45C ~ +125C
68
P +46 8 752 02 20
www.leax.com
Revision A
COMBINERS
Our combiners and diplexers are small and easy to install. This minimizes downtime during integration with existing antenna line systems, which in turn helps
operators avoid loss of income. High quality O-rings provide built-in weather protection and eliminate the need for external weatherproofing.
Our combiners are milled from solid brass and silver-plated to obtain better electrical performance. Exceptional isolation characteristics of 50 dB or better effectively reduce disturbances from neighboring systems. In addition, we have
completely avoided soldering in order to eliminate the risk of cracking that can
occur with soldered joints over time. Please enquire if you need a bespoke filter.
Exir branded Diplexers

Diplexer, 806 - 960 and 1710 - 2170 MHz
Dual Band Combiner, 790 - 862 and 880 -960 MHz
Diplexer, 1710 - 1880 and 1920 - 2170 MHz
Diplexer, 1710 - 2170 and 2300 - 2690 MHz
Rejection Filter, 800 MHz
LEAX branded Diplexers

Outdoor Dual Band Combiner, 1710 - 1880 and 1920 - 2170 MHz
Outdoor Tri-Band Combiner, 380 - 960, 1710 - 1880 and 1920 - 2170 MHz
Outdoor Tri-Band Combiner, 380 - 960, 1710 - 2170 and 2300 - 2690 MHz
Wide-Band Diplexer, 1710 - 2170 and 2400 - 2700 MHz
Outdoor Quad-Band Combiner, 380 - 960, 1710 - 1880, 1920 - 2170 and 2500 - 2690 MHz
Combiner, 300 - 470 and 880 - 960 MHz
www.leax.com
69
Diplexer, 806 - 960 and 1710 - 2170 MHz
Diplexer
806 - 960 and 1710 - 2170 MHz
PRODUCT FEATURES
Low insertion loss
No soldered parts
Mounting on wall or on poles in various dimensions
DC and AISG Issue 2.0 Passthru on selected ports
PRODUCT PROFILE
The Exir Telecom branded diplexer has been developed to keep
intermodulation products at the lowest possible level. The
filter is milled from one solid piece and has no soldered parts.
ELECTRICAL CHARACTERISTICS
DC-PASS ON ALL PORTS
DC-BLOCK ON 806-960 MHz
DIPLEXER
COMM-0918-AB01
COBL-0918-AA00
806 - 960 MHz
WEIGHT
2100 g (4.6 lb)
2100 g (4.6 lb)
1710 - 2170 MHz
DIMENSIONS
210 x 140 x 22 mm
210 x 140 x 22 mm
400 W
HxWxD
(8.27 x 5.51 x 0.87 in)
(8.27 x 5.51 x 0.87 in)
COMMON FOR ALL

FREQUENCY RANGE
INPUT POWER
INTERMODULATION
< -156 dBc
DIPLEXER W. BRACKET
COMM-0918-AD00
COBL-0918-AD00
IMPEDANCE
50 ohm
WEIGHT
2400 g (5.3 lb)
2400 g (5.3 lb)
VSWR / RETURN LOSS
1.22 / -20 dB
DIMENSIONS
210 x 140 x 32 mm
210 x 140 x 32 mm
INSERTION LOSS
< 0.2 dB
HxWxD
(8.27 x 5.51 x 1.26 in)
(8.27 x 5.51 x 1.26 in)
806 - 960, 1710 - 2170 MHz
> 40 dB
COBL-0918-AC00
> 50 dB
DUAL DIPLEXER
W. BRACKET
COMM-0918-AC00
820 - 960, 1710 - 2170 MHz

CONNECTORS
DIN 7/16 female
WEIGHT
4500 g (9.9 lb)
4500 g (9.9 lb)
DIMENSIONS
210 x 140 x 80 mm
210 x 140 x 80 mm
HxWxD
(8.27 x 5.51 x 3.15 in)
(8.27 x 5.51 x 3.15 in)
ISOLATION
70
P +46 8 752 02 20
www.leax.com
Revision C
Dual Band Combiner, 790-862 and 880-960 MHz
Dual Band Combiner

790 - 862, 880 - 960 MHz
PRODUCT FEATURES
High Performance
High Reliability
RoHS Compliants
Selective DC Pass
ARTICLE
COMD-0809-Axyz
790 - 862 MHz
Single = C
No bracket = 0
DC All ports = 0
880 - 960 MHz
Dual = D
Wall bracket = 1
DC block all ports = 1
Pole bracket = 2
DC 790 - 862 MHz = 2
COMMON FOR ALL

FREQUENCY RANGE
COMD-0809-Axyz
INSERTION LOSS
0.4 dB
VSWR / RETURN LOSS
< 1.2 : 1
ISOLATION PORT TO PORT
> 50 dB
Intermodulation (2 x 43 dBm)
-150 dBc min
POWER HANDLING
180 W
IMPEDANCE
50 Ohm nominal
DC 880 - 960 MHz = 3
ENVIRONMENTAL
-40 to +65 C
ENVIRONMENTAL PROTECTION
IP67
MECHANICAL
WEIGHT
4000 g (8.8 lb) (single)
FILTER
307 x 178 x 64 mm
(12.09 x 7.00 x 2.52 in)
FILTER INCLUDING BRACKET
307 x 178 x 123.5 mm

(12.09 x 7.00 x 4.86 in)
RF CONNECTOR
DIN - Female
FINISH
Powder coating
www.leax.com
Revision C
71
Diplexer, 1710-188 and 1920 - 2170 MHz
Diplexer
1710 - 1880 and 1920 - 2170 MHz
PRODUCT FEATURES
IP68-classified
Very compact
High Reliability
Rohs Compliant
High Performance
Low insertion loss
ARTICLE
COMM-1822-Axyz
COMMON FOR ALL

FREQUENCY RANGE
1710 - 1880 MHz

1920 - 2170 MHz
1800 port 200 W
AVERAGE POWER HANDLING
2100 port 100 W

INTERMODULATION
< -155 dBc
IMPEDANCE
50 ohm
VSWR / RETURN LOSS
>20 dB
INSERTION LOSS
0.3 dB typical / Per Pass

Band Edge: 0.5 dB
ISOLATION
>50 dB
CONNECTORS
DIN 7/16 female
FINISH
Powder coating
ENVIRONMENTAL
-40 C to +65 C
WATERPROOF
IP68
MECHANICAL
COMM-1822-Axyz
DIPLEXER SINGLE WITH BRACKET
WEIGHT
2800 g (6.2 lb)
Single = C
No bracket = 0
DC All ports = 0
DIMENSIONS
260 x 125 x 59.5 mm
Dual = D
Wall bracket = 1
HxWxD
(10.3 x 5.0 x 2.4 in)
Pole bracket = 2
DC 1920 - 2170 MH = 2
DC 1710 - 1880 MHz = 3
DIPLEXER DUAL WITH BRACKET
72
WEIGHT
5300 g (11.7 lb)
DIMENSIONS
260 x 125 x 114 mm
HxWxD
(10.3 x 5.0 x 4.5 in)
P +46 8 752 02 20
www.leax.com
Revision E
Diplexer
1710 - 2170 and 2300 - 2690 MHz
PRODUCT FEATURES
Rohs compliant
Very compact
Low insertion loss
Long neck connectors
Mounting on wall or on poles in various dimensions
ARTICLE
COMD-1727-Axyz
COMD-1727-Axyz
PASS BAND 1
1710 - 2170 MHz
Single = 1
No bracket = 0
PASS BAND 2
2300 - 2690 MHz
Dual = 2
Bracket = 1
DC 1710 - 2170 MHz port = 2
IMPEDANCE
50 Ohm
DC 2300 - 2690 MHz port = 3
VSWR
1.19:1 / 21 dB
DC all ports = 4
INSERTION LOSS
0.20 dB max (0.15 dB typical)
ISOLATION
> 50 dB
PIM3 (2 x 20 W carrier)
< -156 dBc
Input Power
400 W
COMMON FOR ALL
ENVIRONMENTAL
-55 C to +80 C
WATERPROOF
IP67
mechanical
WEIGHT
1500 g (3.31 lb)
DIMENSIONS (H x W x D)
142.5 x 96 x 48 mm
FILTER INCLUDING BRACKET
(5.61 x 3.78 x 1.89 in)
CONNECTORS
DIN 7/16 female
COLOR
Powder coating, Color NCS 1502-R
MOUNTING
Mounting brackets for poles and walls
GROUNDING
Tapped hole or bolt M6
www.leax.com
Revision A
73

Co-location mobile network with digital broadcasting system
PRODUCT FEATURES
Low insertion loss
ARTICLE
EXT-P11062-X
Single = 1
ELECTRICAL
FREQUENCY RANGE
791- 801 MHz and 832 - 842 MHz
BAND WIDTH
10 MHz / 10 MHz
Dual = 2
1.2 dB typical, 1.8 dB max. @ 791 - 792 MHz

0.8 dB @ 792 - 801 MHz
INSERTION LOSS
0.35 dB @ 832 - 842 MHz max.

RETURN LOSS
18 dB min.
REJECTION
> 15 dB typical, 12 dB min. @ <790 MHz
POWER HANDLING
200 W, average
PEAK POWER
1000 W
IMPEDANCE
50 Ohm nominal
DC AND AISG
No pass
ENVIRONMENTAL
OPERATING TEMPERATURE RANGE
-33C to +60C
STORAGE TEMPERATURE RANGE
-45C to +85C
RELATIVE HUMIDITY
5% - 95%
APPLICATIONS
Outdoor
WATERPROOF
IP67
MECHANICAL
WEIGHT
74
4500 g (single)
300 x 190 x 127 mm, excluding brackets and connectors
CONNECTOR
DIN 7/16 female, long neck (38 mm) and with EPDM rubber
MATERIAL
Aluminium
COLOR
Powder coating, color NCS 1502-R
PROTECTION GROUND
M8 screw
BRACKETS AND CLAMPS
SS304 or SS316 / passive
P +46 8 752 02 20
www.leax.com
Revision B
Outdoor Dual Band Combiner
CM-DW2-ODxC,
CM-DW2D-ODxC
2, 3 -or2170
4, Preconfigured
DC-pass)
Outdoor Dual Band
Combiner, 1710 - 1880 (x=1,
and 1920
MHz
Band 1:1710-1880MHz Band 2:1920-2170MHz
Enables feeder sharing between DCS1800 and UMTS system

High power handling and low loss maximizes system performance
500W maximum output power rating
High isolation minimizes interference
Build with optional DC bypass, to be used in applications with or without Tower
Mounted Amplifiers installed
Available as a single unit or double unit
Electrical
Specifications
Outdoor Dual
Band
Combiner
Single Unit photo for reference

Pass Band Frequency Range (MHz)
1710 - 1880 and 1920 - 2170 MHz

Parameters / Specifications
PRODUCT FEATURES
1710-1880
1920-2170
Insertion Loss(dB)
0.3
Isolation between Ports(dB)
50
Return Loss(dB)
20
Maximum input power per port (W)
250
Enables feeder sharing between

DCS1800
and UMTS system
Intermodulation
Products(dBc)
-155@2x43dBm
Impedance
()
High power handling and low
loss maximizes
system performance
50
500 W maximum output power rating
Mechanical Specifications

Parameters
Specifications
Build with optional DC bypass, to be used in applications with or withoutSingle Unit

Dimensions, LxWxH (excluding connectors
mounting bracket) (mm) / (in)
Tower Mounted Amplifiersand
installed
332x146x86 / 13.1x5.7x3.4
Double Units
Available as a single unit orWeight

double(including
unit connectors and mounting
bracket) (kg) / (lb)
303x173x106 / 11.9x6.8x4.2
Single Unit
3.2 / 7.7
Double Units
5.8 / 13.2
Color
Light Grey
RF Connectors
7/16 DIN-Female
Technical Specifications Mounting Kit
INSERTION LOSS
Isolation between Ports
Return Loss
Environment Class
1710 - 1880 MHz
<95
1920 - 2170 MHz
Shipping Dimensions, LxWxH (mm) / (in)
IP66(Indoor or Outdoor)
0.3 dB Single Unit
445x240x265 / 17.5x9.4x10.4
50 dB Double Units
445x240x265 / 17.5x9.4x10.4
20 dB Single Unit
Shipping Weight (kg) / (lb)
250 W
Maximum Input Power Per Port

Lightning Protection
Intermodulation Products
MTBF(hr)
Impedance
Mechanical
-40 to +65
Operational Humidity (%)
4.5 / 9.9
Double Units
7.2 /15.8
Comply with IEC 61000-4-5; 8kA, 8/20s
-155 dBc @ 2x43

dBmUnit
Single
>1,000,000
50 OhmDouble Units
>500,000
Double
332Units
x 146 x 86 mmDC
(13.1
x 5.7Optional
x 3.4 in)
Dimensions (L x W x H), excluding Single Unit Model Single unit:
Bypass
Number
Model Number
connectors and mounting bracket
units: 303 x 173 x 106 mm No
(11.9
6.8 x 4.2 in)
CM-DW2-OD1C DoubleCM-DW2D-OD1C
DC xBypass
weight, including connectors

and mounting bracket
CM-DW2D-OD2C
DC(7.7
Bypass
Single unit: 3.2 kg
lb) @1710-1880
CM-DW2-OD2C
CM-DW2-OD3C
CM-DW2D-OD3C
Double units: 5.8DC
kg Bypass
(13.2 lb)@1920-2170
Full DC Bypass
CM-DW2-OD4C
color
CM-DW2D-OD4C
Light Grey
rf connectors
7/16 DIN-Female
mounting kits
Pole (clamps included for 35-125 mm Pole) or Wall mounted

-40 to +65C
Operating Temperature Range
Block
BlockDiagram
Diagram
Port 3
Port 1
1710-1880
DC/AISG Bypass
Frequency Range
Pole (clamps included for 35-125mm Pole) or Wall mounted
Operating Temperature Range(oC)
DC/AISG Bypass
ELECTRICAL
Port 2
1920-2170
Example: View of Single unit CM-DW2-OD4C
95%
IP66 (Indoor or Outdoor)

2013 Comba Telecom. All rights reserved
unit:on445
x 240
x 265 mmrequirements.
(17.5 x 9.4 x 10.4
Specifications may differSingle
depending
region
and customers
Shipping Dimensions (L x W DS-Control:
x H)
3-5-2 / 1113
Environment Class
in)
Page 1 of 1
Double units: 445 x 240 x 265 mm (17.5 x 9.4 x 10.4 in)

Single unit: 4.5 kg (9.9 lb)
Shipping weight
Double units: 7.2 kg (15.8 lb)

Single unit: >1,000,000 h
MTBF
Double units: >500,000 h
Single Unit Model Number
Double Units Model Number
DC Bypass Optional
COMD-1722-CA00
COMD-1722-CD00
No DC Bypass
COMD-1722-CA01
COMD-1722-CD01
DC Bypass @1710-1880
COMD-1722-CA02
COMD-1722-CD02
COMD-1722-CA03
COMD-1722-CD03
Full DC Bypass
www.leax.com
Revision A
75
CM-FK2-ODx, CM-FK2D-ODx(x=1, 2, 3 or 4, Preconfigured DC-pass)

Band 1:380-960MHz Band2:1710-2700MHz
Extra wideband design for feeder sharing between systems in 380-960MHz

and 1710-2700MHz range
Long connectors allow ease of waterproofing
Built with optional DC bypass, to be used with Tower Mounted Amplifiers and
AISG compliant devices

380 - 960 and 1710 - 2700 MHz
Electrical Specifications

PRODUCT FEATURES
380-960
0.2
Isolation between Ports (dB)
60
Return Loss
(dB) systems in 380-960 MHz
Extra wideband design for feeder sharing
between
20
Maximum input power per port (W)
and 1710-2700 MHz range
1710-2700
Insertion Loss (dB)
500
300
Intermodulation Products (dBc)
-155@2x43dBm
Impedance ()
Long connectors allow ease of waterproofing
50
Built with optional DC bypass, to be used with Tower Mounted Amplifiers

Parameters
Single Unit
180x110x50 / 7.1x4.3x2.0
Double Units
180x110x103 / 7.1x4.3x4.0
Weight (including connectors and mounting

Single Unit
2.0 / 4.3
Double Units
Color
ELECTRICAL
RF Connectors
Frequency Range
380 - 960 Range(

MHz oC)
7/16 DIN-Female
1710 - 2700 MHz
Environment Class
<95
60 dB
Shipping Dimensions, LxWxH (mm) 20

/ (in) dB
Return Loss
500 W

Impedance
-40 to +65
0.2 dB
Single Unit
405x226x210 / 15.9x8.9x8.3
Double Units
405x225x275 / 15.9x8.9x10.8
Single
Unit
300
W
3.0 / 6.6
Double Units
5.0 / 11.0
-155 dBc @ 2x43 dBm

50 Ohm
MTBF(hr)
Single Unit
>1,000,000
Double Units
Mechanical
OrderingSingle
Information
unit: 180 x 110 x 50 mm (7.1 x 4.3 x 2.0 in)
Dimensions (L x W x H), excluding

connectors and mounting bracket
Single Unit Model

Double Units
DC Bypass Optional
Number
Model
Number
Double units: 180
x 110
x 103 mm (7.1 x 4.3 x 4.0 in)
CM-FK2-OD1
CM-FK2D-OD1
No DC Bypass

CM-FK2-OD2
CM-FK2-OD3
CM-FK2D-OD2
CM-FK2-OD4
color
DC Bypass @380-960
Double
units: 3.9 kg (8.6
CM-FK2D-OD3
DC lb)
Bypass @170-2700
CM-FK2D-OD4
Full DC Bypass
Light Grey
rf connectors
7/16 DIN-Female
mounting kits

-40 to +65C
Shipping Dimensions (L x W x H)
Block Diagram
Port 3
Port 1
380-960
Port 2
1710-2700
Example: View of Single unit CM-FK2-OD4
95%
Environment Class
>500,000
Block Diagram
DC/AISG Bypass
3.9 / 8.6
Light Grey
Mount Kit
INSERTION LOSS
Specifications

and mounting bracket) (mm) / (in)
DC/AISG Bypass
and AISG compliant devices

IP66 is(Indoor
Outdoor)at time of ordering.
Information contained in this document
subject toor
confirmation
Specifications may differ depending on region and customers requirements.
Single
unit: 405 x 226 x 210 mm (15.9 x 8.9 x 8.3 in)
DS-Control: 3-0-1
/ 1113
Page 1 of 1

Shipping weight

MTBF
Double units: >500,000 h
76
DC Bypass Optional
COMD-0327-CA00
COMD-0327-CD00
No DC Bypass
COMD-0327-CA01
COMD-0327-CD01
DC Bypass @380-960
COMD-0327-CA02
COMD-0327-CD02
COMD-0327-CA04
COMD-0327-CD04
Full DC Bypass
P +46 8 752 02 20
www.leax.com
Revision A
Outdoor Tri-band Combiner, 380 - 960, 1710 - 1880 and 1920 - 2170 MHz
Outdoor Tri-band Combiner
CM-FDW3-ODx, CM-FDW3D-ODx(x=1, 2or 6, Preconfigured DC-pass)

Band 1:380-960MHz Band 2:1710-1880MHz
Band 3:1920-2170MHz
Designed for feeder sharing and co-location purpose

High power handling and low loss-maximizes system performance
750W maximum output power rating
High isolation-minimizes interference
Built with optional DC (AISG signals) bypass
380 - 960, 1710 Electrical

- 1880
and 1920 - 2170 MHz
Specifications
380-960
Insertion Loss (dB)
1710-1880
0.3
Isolation between Bands (dB)
50
Return Loss (dB)
20
Maximum Input Power Per Port (W)
250
Intermodulation
Products (dBc)
Designed for feeder sharing and co-location
purpose
-155@2x43dBm
Impedance ()
50

750 W maximum output power rating
High isolation-minimizes interferenceParameters
Specifications

Built with optional DC (AISG signals) and
bypass
mounting bracket) (mm) / (in)
220x180x103 / 8.7x7.1x4.1
Single Unit
3.2 / 7.0
Double Units
6.0 / 13.2
Light Grey
RF Connectors
7/16 DIN-Female
Mounting Kit
Operating Temperature Range (C)
380 - 960 MHz
Frequency Range
1710 - 1880 MHz
0.2Class
dB
Environment
INSERTION LOSS
Isolation between BANDS
0.3 dB
Shipping Weight (kg) / (Ib)
Impedance
MTBF (hr)
Mechanical
Single Unit
464x364x184 / 18.3x14.3x7.2
20 dB
Double Units
465x365x250 / 18.3x14.4x9.8
Single Unit
4.6 / 10.1
250 W
Double Units
50 Ohm
7.8 / 17.1
-155 dBc @ 2x43 dBm

Single Unit
>1,000,000
Double Units
>500,000
Block Diagram
Dimensions (L x W x H), excluding connectors

Single
unit: 220Double
x 180 xUnits
50.5 mm (8.7 x 7.1 x 2.0 in)
Single Unit
Model
DC Bypass Optional
Number
Model Number
Double
units:
220
x
180
x 103 mm (8.7 No
x 7.1
4.1 in)
CM-FDW3-OD1
CM-FDW3D-OD1
DCxBypass
CM-FDW3-OD2
CM-FDW3-OD3
CM-FDW3-OD4
CM-FDW3D-OD3
CM-FDW3D-OD4

Light Grey
CM-FDW3D-OD6
Full DC Bypass
rf connectors
7/16 DIN-Female
mounting kits

-40 to +65C
Port 4
Port 1
380-960
Port 2
1710-1880
Port 3
1920-2170
Example: View of Single unit CM-FDW3-OD6
95%
Block Diagram
CM-FDW3D-OD2
Single
unit: 3.2 kg (7.0 DC
lb) Bypass @380-960
CM-FDW3-OD6
Environment Class
95
60 dB
Shipping Dimensions, LxWxH (mm) / (in)
Return Loss
-40 to +65
1920 - 2170 MHz
DC Bypass
ELECTRICAL
color
220x180x50.5 / 8.7x7.1x2.0
Double Units
Color

Single Unit
DC Bypass
1920-2170
0.2
DC Bypass
PRODUCT FEATURES
2013 Comba Telecom. All rights

reserved
IP66
(Indoor or Outdoor)
Specifications
may
differ
depending
on
region
and customers
Single unit: 464 x 364
x 184
mm (18.3requirements.
x 14.3 x 7.2 in)
DS-Control: 2-0-0 / 1113
Page 1 of 1

Shipping weight

MTBF
Double units: >500,000
DC Bypass Optional
COMT-0322-CA00
COMT-0322-CD00
No DC Bypass
COMT-0322-CA01
COMT-0322-CD01
DC Bypass @380-960
COMT-0322-CA02
COMT-0322-CD02
COMT-0322-CA03
COMT-0322-CD03
COMT-0322-CA04
COMT-0322-CD04
Full DC Bypass
www.leax.com
Revision A
77
Outdoor Tri-band Combiner, 380 - 960, 1710 - 2170 and 2300 - 2690 MHz
CM-FKY3-ODx, CM-FKY3D-ODx(x=1, 2or 6, Preconfigured DC-pass)

Band 1:380-960MHz Band 2:1710-1880MHz
Band 3:2300-2690MHz

Built with optional DC (AISG signals) bypass, to be used with Tower Mounted
Amplifiers and AISG compliant devices
380 - 960, 1710Electrical

- 2170
and 2300 - 2690 MHz
Specifications
380-960
1710-2170
Insertion Loss (dB)
PRODUCT FEATURES
2300-2690
0.3
60 (380-960 / 1710-2170MHz)
60 (380-960 / 2300-2690MHz)
55 (1710-2170 / 2300-2690MHz)
20
Isolation between Ports (dB)
Return Losspurpose
(dB)
Maximum Input Power Per Port (W)
250

-155@2x43dBm

Impedance ()
50
Built with optional DC (AISG signals) bypass, to be used with Tower Mounted
Amplifiers and AISG compliant devices
Parameters
ELECTRICAL
Specifications

Single Unit
187x158x50 / 7.4x6.2x2.0
Double Units
187x158x102 / 7.4x6.2x4.0

Single Unit
2.6 / 5.7
Double Units
5.2 / 11.5
Color
Light Grey
RF Connectors
380 - 960 MHz
Mounting Kit
Frequency Range
INSERTION LOSS
1710 - 2170 MHz
Operating Temperature Range (C)
2300 - 2690 MHz
0.3 dB
-40 to +65
60(%)
dB (380 - 960 / 1710 - 2170 MHz)
95
60 dB (380 - 960 / 2300 - 2690 MHz)

55 dB (1710 - 2170 / 2300 - 2690 MHz)
Environment Class
Shipping Dimensions, LxWxH (mm) 20

/ (in) dB
Return Loss
Impedance
250 W
50 Ohm
Single Unit
392x247x185 / 15.4x9.7x7.3
Double Units
400x300x220 / 15.7x11.8x8.7
Single Unit
3.5 / 7.7
Double Units
6.1 / 13.4
-155 dBc @ 2x43 dBm
MTBF (hr)
7/16 DIN-Female
Single Unit
>1,000,000
Double Units
Mechanical
>500,000
Block Diagram
OrderingSingle
Information
unit: 187 x 158 x 50 mm (7.4 x 6.2 x 2.0 in)
Dimensions (L x W x H), excluding connectors
Single Unit
Double Units
DC Bypass Optional
Model Number
Model Number
Block Diagram
Port 4

No DC Bypass
CM-FKY3D-OD2
DC Bypass @380-960
CM-FKY3-OD3
Double units: 5.2 kgDC

(11.5
lb) @1710-2170
CM-FKY3D-OD3
Bypass
CM-FKY3-OD4
CM-FKY3D-OD4
CM-FKY3-OD6
CM-FKY3D-OD6
Full DC Bypass
Light Grey
7/16 DIN-Female
mounting kits
-40 to +65C
Port 2
1710-2170
Port 3
2300-2690
Example: View of Single unit CM-FKY3-OD6
95%
Environment Class
Port 1
380-960
DC Bypass
rf connectors
CM-FKY3D-OD1
CM-FKY3-OD2
DC Bypass
color
CM-FKY3-OD1
DC Bypass


IP66 is(Indoor
Outdoor)at time of ordering.
Information contained in this document
subject toor
confirmation
Specifications may differ depending on region and customers requirements.
DS-Control: 3-0-0
/
1113
Single unit: 392 x 247 x 185 mm (15.4 x 9.7 x 7.3 in)
Page 1 of 1

Shipping weight

MTBF
78
DC Bypass Optional
COMT-0327-CA00
COMT-0327-CD00
No DC Bypass
COMT-0327-CA01
COMT-0327-CD01
DC Bypass @380-960
COMT-0327-CA02
COMT-0327-CD02
COMT-0327-CA03
COMT-0327-CD03
COMT-0327-CA04
COMT-0327-CD04
Full DC Bypass
P +46 8 752 02 20
www.leax.com
Revision A
Wide-band Diplexer, 1710 - 2170 and 2400 - 2700 MHz
Wide-band Diplexer
1710 - 2170 and 2400 - 2700 MHz
PRODUCT FEATURES
Wide-band design enables feeder sharing between systems in the 1710-2170 MHz
range and the 2400-2700 MHz range.
Long connectors allow ease of waterproofing.
High power handling and low loss maximizes system performance.
High isolation minimizes interference.
Built with full band DC bypass, to be used with Tower Mounted Amplifiers and AISG
compliant devices.
and Diplexer
2-OD4
ENVIRONMENTAL
ELECTRICAL
res and Product Description

Frequency Range
2400 - 2700 MHz
95%
0.2 dB
0.2 dB
Environmental Class
-band design enables feeder

sharing between
systems in the
INSERTION
LOSS
0-2170MHz range and the 2400-2700MHz range.
g connectors allow ease of waterproofing.
Isolation
Bands
power handling and low loss
maximizes between
system performance.
isolation minimizes interference.
with full band DC bypass, return
to be used with
Tower Mounted Amplifiers and
loss
G compliant devices.
Power Handling Continuous
Power Handling Continuous

ical Specifications@ Common Port
ical
anical
weighT
50
20
mm (in)
kg (lb)
ectors
Kit
Housing
onmental Characteristics
RF Connectors
o
g Temperature Range
C
250 W
MTBF
50 Ohm

> 1.000.000 h
single
double
COMD-1727-CAyz
COMD-1727-CDyz
250
179 x 121 x 49.5 mm (7.0 x 4.8 x 1.9 in)

179x121x49.5 (7.0x4.8x1.9)
2.5 kg (5.5 lb)
2.5 (5.5)
Light grey
Light Grey
Aluminum
DIN 7/16 female
Aluminum
Pole (clamps included for 35-125mm) or wall mounted
DIN 7/16 female
-40 to +65
<95
Pole (clamps included for 35IP66 (Indoor or Outdoor)
125mm) or wall mounted
ETS 300 342-3
> 1,000,000
Mounting kits
Protection
hr
block diagram
Port 1
1710-2170
DC/AISG Bypass
Port 3
DC/AISG Bypass
Diagram
500 average
-155 @2 x 43dBm
50
x W x H)
Colors
nal Humidity
ment Class
2400-2700
0.2
250
(including mounting brackets)
n (LxWxH including mounting
EMC
20 dB
500 W average
1710-2170
0.2
ETS 300 342-3
50 dB
-155 dBc @2 x 43dBm
d Frequency Range
MHz
Loss
impedance dB
between Bands
dB
oss
dB
andling Continuous
W
andling Continuous at Common
Port
MechanicalW
ulation Products
dBc
ce
Dimensions,(L
-40 to +65C
1710 - 2170 MHz
Port 2
2400-2700
on contained in this document is subject to confirmation at time of ordering.

ww.comba-telecom.com
Issued: Aug09
Control: 3-0-0
1/1
www.leax.com
Revision A
79
Outdoor Quad-band Combiner, 380 - 960, 1710 - 1880, 1920 - 2170 and 2500 - 2690 MHz
Outdoor Quad-band Combiner
CM-FDWY4-ODx, CM-FDWY4D-ODx(x=1, 2or 8, Preconfigured DC-pass)

Band 1:380-960MHz Band 2:1710-1880MHz
Band3:1920-2170MHz Band4:2500-2690MHz
Outdoor Quad-band Combiner

Built with full band DC bypass, to be used with Tower Mounted Amplifiers and AISG compliant devices
380 - 960, 1710 - 1880, 1920 - 2170 and 2500 - 2690 MHz
380-960
1710-1880
1920-2170
Insertion Loss (dB)
PRODUCT FEATURES
2500-2690
0.3
Isolation Between Bands (dB)
50
Return Loss (dB)
20
Maximum input Power Per Port (W)

purpose
250
-155 @2x43dBm
High power handling and low loss Impedance

maximizes
()system performance
50
Mechanical
Specifications
Built with full band DC bypass, to be
used with Tower
Mounted Amplifiers
Parameters
and AISG compliant devices
Specifications

Single Unit
240x210x50 / 9.4x8.3x2.0
Double Units
240x210x103 / 9.4x8.3x4.1

Single Unit
3.8 / 8.4
Double Units
7.8 / 17.2
Color
Light grey
RF Connectors
ELECTRICAL
7/16 DIN-Female
Mounting Kit
380 - 960 MHz
1710 - 1880 MHz
Operating Temperature Range(oC)
Frequency Range
1920 - 2170 MHz
0.3 dB
INSERTION LOSS
Environment Class
Return Loss
Shipping Dimensions, LxWxH (mm)

/ (in)dB
20
440x280x250 / 17.5x11.1x9.9
520x355x235 / 20.6x14.1x9.3
Single Unit
5.2 / 11.5
250 W
50 Ohm
MTBF(hr)
Mechanical
Single Unit
Double Units
-155 dBc @ 2x43 dBmDouble Units
Impedance
<95
50 dB
Shipping Weight (kg) / (Ib)

2500 - 2690 MHz
-40 to +65
9.6 / 21.1
>1,000,000
>500,000
Single Unit
Double Units
Block Diagram
Single unit: 240

x 210
x 50 mm (9.4 x 8.3 x 2.0 in)
Dimensions (L x W x H), excluding connectors Single Unit Model
Double
Units
DC Bypass Optional
Number
Model Number
Block Diagram
Port 5
color
CM-FDWY4-OD3
CM-FDWY4-OD4
CM-FDWY4D-OD3
DC Bypass
Double units: 7.8 kg (17.2
lb) @1710-1880
CM-FDWY4D-OD4
CM-FDWY4-OD5
CM-FDWY4D-OD5
CM-FDWY4-OD8
rf connectors
Light Grey DC Bypass @2500-2690

CM-FDWY4D-OD8
7/16 DIN-Female Full DC Bypass
mounting kits
Port1
380-960
-
Port2
1710-1880
Port3
1920-2170
Port 4
2500-2690
Example: View of Single unit CM-FDWY4-OD8
-40 to +65C
95%
Environment Class
No DC Bypass
DC Bypass
Single unit: 3.8 kg (8.4

CM-FDWY4D-OD2
DClb)
Bypass @380-960
DC Bypass
CM-FDWY4D-OD1
CM-FDWY4-OD2
DC Bypass
CM-FDWY4-OD1
DC Bypass

unit:
280 x 250 mm (17.5 x 11.1 x 9.9 in)
2013 CombaSingle
Telecom.
All 440
rights x
reserved
520onxregion
355 and
x 235
mm (20.6
x 14.1 x 9.3 in)
SpecificationsDouble
may differunits:
depending
customers
requirements.
DS-Control: 3-0-0 / 1113
Page 1 of 1
Shipping weight

MTBF
80
DC Bypass Optional
COMQ-0327-CA00
COMQ-0327-CD00
No DC Bypass
COMQ-0327-CA01
COMQ-0327-CD01
DC Bypass @380-960
COMQ-0327-CA02
COMQ-0327-CD02
COMQ-0327-CA03
COMQ-0327-CD03
COMQ-0327-CA04
COMQ-0327-CD04
COMQ-0327-CA05
COMQ-0327-CD05
Full DC Bypass @2300-2690
P +46 8 752 02 20
www.leax.com
Revision A
Combiner
300 - 470 and 880 - 960 MHz
PRODUCT FEATURES
High Performance
High Reliability
RoHS Compliant
ARTICAL
ELECTRICAL
FREQUENCY RANGE
COMD-0409-A0XX
LOW
HIGH
300 - 470 MHz
880 - 960 MHz
INSERTION LOSS
0.5 dB
RETURN LOSS
18 dB
ISOLATION
50 dB
OUTLINE DRAWING
200 W
POWER
PIM
150 dBc
IMPEDANCE
50 Ohm
ENVIRONMENTAL
-40 to +65C
MECHANICAL
DIMENSIONS, (excluding brackets)
275 x 108 x 49 mm
RF CONNECTORS
DIN female
FINISH
Grey colour
www.leax.com
Revision A
81
REPEATERS
We offer a range of low power repeater solutions on all bands, for indoor use.
Our indoor repeaters are designed to be easily installed and set up on-site. The
repeaters incorporate digital isolation cancellation to avoid antenna oscillation.
If the gain is set too high and if signal and donor antennas are placed to closely
together the repeater will automatically decrease the gain level.
LEAX branded Repeaters

WCDMA Digital Band Selective Repeater, 2100 MHz
Digital Channel Selective Repeater, GSM 1800 MHz
WCDMA Digital Channel Selective Repeater, 2100 MHz
Bandwidth Adjustable Pico Repeater, GSM 900 MHz
Coverage Maintenance System, CMS v8.2
Digital Band Selective Repeater, 1800 MHz
Digital Band Selective Repeater, GSM 900 MHz
LTE Band Selective Repeater, 2600 MHz
WCDMA Digital PICO Repeater, 1920 - 1980 & 2110 - 2170 MHz
GSM1800 Bandwidth Adjustable Pico Repeater, 1805 1855 or 1855 1880 & 1710 1760 or 1760 1785 MHz
www.leax.com
81
WCDMA Digital Band Selective Repeater, 2100 MHz
WCDMA Digital Band Selective Repeater

2100 MHz
PRODUCT FEATURES
Friendly and easy OMT interface via RJ45 connection
Integrated WCDMA wireless modem for remote configuration,
monitoring and control
Internal backup battery keeps the alarm unit running for up to two
hours after power failure
Optional OMC is available for remote operation and maintenance of
agroup of repeaters
Designed for all weather outdoor installation waterproof, dampproof and omni-sealed (IP65)
Compliance with 3GPP
Power, Mechanical & Environmental
RP21-BAxx-CA00
ELECTRICAL
1W
2W
5W
10 W 20 W
Frequency Range, Uplink
1920 1980
Weight (approX.)
Frequency Range, DOWNlink
1920 1980
Power Supply
SUB-BANDS
Power Consumption (approX.)
Bandwidth
1~3 carriers adjustable
Power Up Waiting Time (approX.)
Instantaneous Bandwidth
30 MHz
MCU Battery Backup Time (approX.)
Total Output Power, Uplink
23 dBM
Enclosure Cooling
Total Output Power, DOWNlink

Maximum System Gain
Gain Adjustment Range
System Noise Figure at Max.
System Gain
30
33
37
40
43
RF Connectors
90
430 x 300 x 164 mm
Dimensions, (H x W x D)
0 - 30 dB
Operating Humidity
5 dB
Environmental Class
18 Kg
100 240 / 47 63 Hz
130
140
150
160
180
180 sec
2 hr
Convection
N-Female
-33 to +55C
95%
IP65
50,000
MTBF
Out-of-Band Gain
@ maximum bandwidtH
Intermodulation
Spurious Emission
EVM
Compliance with 3GPP TS 25 106
ACRR
PCDE
Spurious Emission Mask
System Group Delay
Absolute Maximum RF
Input Power
82
6.5 sec
-10 dBm
Input VSWR
1.5
Impedance
50 Ohm
P +46 8 752 02 20
www.leax.com
Revision A
Digital Channel Selective Repeater

GSM 1800 MHz
PRODUCT FEATURES
Support up to 12 GSM Channels
Digitalized Antenna Feedback Cancellation (AFC) function to
reduce the antenna isolation requirement up to 30 dB
Dynamic Uplink Noise Control (UNC) function to reduce Uplink
Interference by automatically switch off the corresponding carriers
when no traffic
Support carrier tracing
10 W Downlink Output Power utilizing ultra Linear PA, supports
GSM, GPRS and EDGE
With built-in GSM modem, supports remote alarm monitoring and
configuration based on the unified OMT / OMC platform
IP65 Chassis, designed for all outdoor application waterproof,
damp-proof and omni-sealed
RP18-CS40-CA00
ELECTRICAL

1710 1735
Weight (approX.)
1805 1830
Power Supply
430 x 420 x 182 mm

25 Kg
100 240 / 47 63 Hz
25
150
4 or 8 or 12
120 sec
33 dBm
40 dBm
Enclosure Cooling
Number of Channels
Maximum System Gain
100
RF Connectors
0 - 30 dB
Feedback Cancellation
30 dB
Channel selectivity
Operating Humidity
Environmental Class
@ 400 KHz
> 50 dB
@ 600 KHz
> 55 dB
@ 1 MHz
> 60 dB
INTERMODULATION
45 dBc
2 hr
Convection
N-Female
-33 to +55C
95%
IP65
50,000
MTBF
In Band Spurious
1710-1785 /1805-1880 MHz
60 dBc
Out of Band Spurious Emission
9 KHz to 1 GHz
36 dBm
1 GHz to 12.75 GHz
30 dBm
System Noise Figure @

Maximum Gain
System Group Delay
Absolute Maximum RF
Input Power
5 dB
11 sec
-10 dBm
Input VSWR
1.5
Impedance
50 Ohm
www.leax.com
Revision A
83
Digital Channel Selective Repeater

GSM 900 MHz
PRODUCT FEATURES
Support up to 12 GSM Channels
Digitalized Antenna Feedback Cancellation (AFC) function to reduce
the antenna isolation requirement up to 30 dB
Dynamic Uplink Noise Control (UNC) function to reduce Uplink Interference by automatically switch off the corresponding carriers when no
traffic
10 W Downlink Output Power utilizing ultra Linear PA, supports GSM,
GPRS and EDGE
With built-in GSM modem, supports remote alarm monitoring and
Ideal for urban area coverage extensive / optimizations for both indoor
and outdoor applications
Single pole installation for Coverage extension applications with AFC to
reduce the antenna isolation requirement
Dense urban area deployment (i.e., multiple units in same donor sector)
with UNC to reduce uplink interference
RP09-CS40-CAxx
ELECTRICAL
890 915
Weight (approX.)
935 960
Power Supply
330 x 420 x 182 mm

25 kg
100 240 / 47 63 Hz
Power Consumption
170 W
33 dBm
120 sec
40 dBm
Maximum System Gain
100 dB
Enclosure Cooling
4 or 8 or 12
number of channels
0 - 30 dB
Feedback Cancellation
30 dB
Channel Selectivity
at 600 KHz
>55 dB
Environmental Class
at 1 Mhz
>60 dB
MTBF
40 dB
In Band Spurious
(890-915 /935-960 MHz)
60 dBc
9 KHz to 1 GHz
36 dBm
1 GHz to 12.75 GHz
30 dBm
2 hour
Convection
N-Female
-33 to +55C
95%
IP65
50,000
5 dB

Maximum gain
11 sec
System Group Delay
10 dBm
Absolute Maximum RF
Input Power
Input VSWR
1.5
Impedance
50 Ohm
Operating Humidity
Intermodulation
Out of Band Spurious

Emission
RF Connectors
>50 dB
at 400 KHz
84
P +46 8 752 02 20
www.leax.com
Revision
Revision A
A
WCDMA Digital Channel Selective Repeater, 2100 MHz
WCDMA Digital Channel Selective Repeater

2100 MHz
PRODUCT FEATURES
Utilizing the latest Pre-distortion MCPA technologies to deliver 20 W
Downlink Power
Output in a compact chassis (18 kg)
Automatic Digital gain control and Antenna Feedback Cancellation
(AFC) feature that can reduce the isolation requirement up to 30 dB
Support up to 4 WCDMA channels in 25 MHz instantaneous bandwidth
With built-in wireless modem, supports remote alarm monitoring and
IP65 Chassis, designed for all outdoor application waterproof, dampproof and Omni-sealed
RP21-CS43-CA00
1920 1980
2110 2170
25 MHz
4
Number of channels
23 dBm
43 dBm
105
Maximum System Gain

0 - 30 dB
Antenna Feedback Cancellation
30 dB

Maximum Gain
5 dB
System Group Delay

ELECTRICAL
Weight (approX.)
Power Supply (optional.)
18 kg
100 240 / 47 63 Hz (VAC)
-48 DC
180
60 sec

Enclosure Cooling
RF Connectors
Operating Humidity
Environmental Class
11 sec
430 x 300 x 164 mm
2 hr
Convection
N-Female
-33 to +55C
95%
IP65
50,000
MTBF
Spectrum Emission Mask

acrr
evm
PCDE
Compliance wi th 3GPP TS
25.106 and 3GPP TS 25.143
intermodulation
Absolute Maximum RF
Input Power
-10 dBm
Input VSWR
1.5
Impedance
50 Ohm
www.leax.com
Revision A
85
Bandwidth Adjustable Pico Repeater, GSM 900 MHz
Bandwidth Adjustable Pico Repeater

GSM 900 MHz
PRODUCT FEATURES
15 dBm Uplink and Downlink output power
2-25 MHz bandwidth adjustable within GSM band
Broadband linear power amplifier ensures un-distorted amplification
of GSM900 signals
Local Commissioning by OMT software and remote monitoring
available by modem (optional)
Compact Size, light weight for easy and fast deployment
article
RP09-BA15-CA00

210 x 140 x 45 mm
935 960 MHz

890 915 MHz
Weight (approX.)
2 kg
Power Supply
100 240 / 47 63 Hz VAC
60 dB
20 W
2 - 25 MHz
2 - 25 MHz
Enclosure Cooling
Convection
RF Connectors
0 - 20 dB
SMA
15 1.5 dBm
-10 to +40C
Output Power, Downlink
Operating Humidity
15 1.5 dBm
85%
Output Power, Uplink
Environmental Class
7 dB
IP30
Pass Band Ripple, p-p
MTBF
6 sec
> 50,000
System Group Delay
ELECTRICAL
FREQUENCY RANGE
Downlink
Uplink
Maximum System Gain

Operating Bandwidth
Downlink
Uplink
System Noise Figure UL

@ Maximum Gain
Spurious Emissions
Out-of-band Gain
7 dB
9 KHz 1 GHz
1 GHz 12.75 GHz
ETSI EN 300
609 4 V8.0.2
Intermodulation
86
Input VSWR
1.8
Absolute Maximum
RF Input Power
+10 dBm
Impedance
50 Ohm
P +46 8 752 02 20
www.leax.com
Revision A
Coverage Maintenance System, CMS v8.2
Coverage Maintenance System

CMS v8.2
PRODUCT FEATURES
system requirements
Complete Management Platform for wireless enhancement products
CMS Server Minimum Hardware Requirements

(Less than 1000 NEs)
(Network Elements) including repeaters, boosters and NMU etc
Dual-core 3.0 GHz or above
PROCESSOR
4 GB
MEMORY
Real-time or scheduled query for parameters configuration and status update.
HARD DISK
80 GB
NETWORK
2 x 100 BaseT LAN

At least one available Com Port
SERIAL PORTS
Real time alarm collection with Alarm history log
MODEM
1x GSM modem
(If the communication mode between
CMS and devices is SMS/GPRS)
CD-ROM
CD-ROM 48 x speed
ip gateway
MCP-1001 (optional)
Concurrent handling of multiple NEs

Scheduled batch processing of commands
North Bound Interface for integration with others EMS or NMS with SNMP
Support SMS or IP-based communication mode. Optional interface to
SMS center (SMPPv3.3 or 3.4). Support alarm forwarding to cellular
device handset via SMS or email
Optional Electronic Map Interface (MapX 5.0 or above version).
CMS Server Software Requirements

OPERATING SYSTEM
Windows Server 2008 (US version)
Support Browser Server configuration over TCP/IP
Supported Database
Applications
Microsoft SQL Server 2005/2008

Standard Edition
Running on standard Server platform. Utilizing proven Microsoft SQL
JDK 1.6.x
JDK
database to achieve scaleable, reliable and secure architecture
CMS Installation Requirements
For the installation of CMS, the CMS server should be bond

with a static public IP address for remote access.
CMS GUI
www.leax.com
Revision A
87
Digital Band Selective Repeater, 1800 MHz
Digital Band Selective Repeater

1800 MHz
PRODUCT FEATURES
4 pass band segments with independent ON/OFF for maximum
flexibility
10 W total output power
Integrated wireless modem for remote configuration, monitoring
and control
Internal backup battery keeps the alarm unit running for up to
two hours after power failure
Support offline isolation detection
Compatible to our generic OMT and OMC platform
Designed for all weather outdoor installation waterproof,
damp-proof and omni-sealed (IP65)
Can be configured as Master Unit (MU) or Slave Unit (SU) in a
centralized monitoring system
RP18-BS40-CA00

ELECTRICAL
1710 1785
Weight (approX.)
1805 1880
Power Supply
430 x 300 x 164 mm

18 kg
100 240 / 47 63 Hz
60 MHz
180
Number of band selective

segment
180 sec
operating bandwidth per

band selective segment
0.2 - 20 MHz adjustable
30 dBm
40 dBm
90
Maximum System Gain
0 - 30 dB

pass band ripple @ FBW, p-p
5 dB

Maximum Gain
5 dB
Enclosure Cooling
RF Connectors
Operating Humidity
Environmental Class
2 hr
Convection
N-Female
-33 to +55C
95%
IP65
50,000
MTBF
11 sec
System Group Delay

out of band gain
acrr
evm
unwanted emissions
ETSI EN 301 908-15*
input intermodulation
output intermodulation
-10 dBm
Absolute Maximum RF
Input Power
Input VSWR
1.5
Impedance
50 Ohm
*: Compliance with standard @ DL 40 dBm, UL 23 dBm.
88
P +46 8 752 02 20
www.leax.com
Revision A
Digital Band Selective Repeater, GSM 900 MHz
Digital Band Selective Repeater

GSM 900 MHz
PRODUCT FEATURES
Total 4 pass band segments with independent ON/OFF for maximum flexibility
2 W/5 W/10 W/20 W total output power
Integrated GSM wireless modem for remote configuration, monitoring and control
Internal backup battery keeps the alarm unit running for up to two hours after
power failure
Compatible to our generic OMT and OMC platform
Designed for all weather outdoor installation waterproof, damp-proof and omnisealed (IP65).
RP09-BSxx-CAxx
ELECTRICAL
2W
5W
10 W

20 W
890 915
Weight (approX.)
935 960
Power Supply
Power Consumption
0.2-25 adjustable
Operating Bandwidth Per Sub-band
Power Up Waiting Time
SUB-BANDS
MCU Battery Backup Time
30 dBm

331.5
371.5
401.5
431.5
90 dB
Maximum System Gain
0 - 30 dB
Enclosure Cooling
RF Connectors
5 dB
Operating Humidity
Uplink Noise Figure
5 dB
Environmental Class
OUT OF BAND GAIN*
Offset 400KHz
50 dB
Offset 600KHz
40 dB
Offset 1MHz
35 dB
Offset 5MHz
25 dB
Spurious and
Intermodulation**
9kHz-1GHz
-36 dBm
Out of Band Spurious

Emission
9 KHz to 1 GHz
36 dBm
1 GHz to 12.75 GHz
30 dBm
9kHz-1GHz
18 kg
100 240 / 47 63 Hz
150
160
170
180
180 sec
2 hour
Convection
N-Female
-33 to +55C
95%
IP65
50,000
-30 dBm
1.5
Input VSWR
System Group Delay
MTBF
430 x 300 x 164 mm
6.5 sec
Absolute Maximum RF
Input Power
10 dBm
Impedance
50 Ohm
*: Test at 65dB system gain

**: Intermodulation test at 23dBm output _Downlink and at 15dBm output _Uplink.
www.leax.com
Revision A
89
LTE Band Selective Repeater, 2600 MHz
LTE Band Selective Repeater

2600 MHz
PRODUCT FEATURES
10 W total output power
Operating bandwidth can be adjusted via OMT software.
Multi sub-bands (up to 4)
Digital filtering for multi sub-band frequency selection up to 60
MHz in total
Integrated wireless modem for remote configuration, monitoring
and control
Internal backup battery keeps the alarm unit running for up to two
hours after power failure
Optional OMC is available for remote operation and maintenance of
a group of repeaters
Designed for all weather outdoor installation waterproof, dampproof and Omni-sealed (IP65)
RP26-BS43-CA00
ELECTRICAL
Weight (approX.)
2500 2570
2620 2690
1.4/3/5/10/15/20 MHz
Operating Bandwidth
Power Consumption
RF Connectors
Sub-bands (MAXIMUM)
Power Supply
330 x 420 x 182 mm

25 kg
100 240 / 47 63 Hz
180 W
N-Female
-33 to +55C
60 MHz
23 dBm
Operating Humidity
95%
40 dBm
Environmental Class
IP65
Maximum System Gain

85 dB
0 - 30 dB
Pass Band Ripple
4 dB
System Noise Figure

@ Max. System Gain
5 dB
Out-of-Band Gain
ACRR
EVM
Compliance with 3GPP TS 36.106
Unwanted Emissions
Input Intermodulation
Output Intermodulation
90
System Group Delay
7 sec
Absolute Maximum RF
Input Power
10 dBm
Input VSWR
1.5
Impedance
50 Ohm
P +46 8 752 02 20
www.leax.com
Revision A
WCDMA Digital PICO Repeater, 1920 - 1980 & 2110 - 2170 MHz
WCDMA Digital PICO Repeater

1920 - 1980 and 2110 - 2170 MHz
PRODUCT FEATURES
In-built Donor antenna and Service antenna
Automatic Digital gain control and Antenna Feedback Cancellation
(AFC) feature that can reduce the isolation requirement up to 30 dB
Support up to 2 WCDMA channels in 30 MHz instantaneous bandwidth
RP21-0217-CA00
ELECTRICAL
1920 1980 MHz
WeighT
2110 2170 MHz
Power Supply
NUMBER OF CHANNELS
1.5 kg
20 W
Power Up Waiting Time
30 sec
30 MHz
101 dBm
Enclosure Cooling
171 dBm
Maximum System Gain
702 dB
Operating Humidity
0 - 30 dB
Environmental Class
Convection
-10 to +45C
95%
IP30
50,000 hr
MTBF
30 dB
100 240 VAC / 50 60 Hz
Power Consumption
Antenna Feedback Cancellation
239 x 155 x 67 mm
Spectrum Emission Mask

ACRR
EVM
WCDMA Digital PICO Repeater
Compliance with 3GPP TS 25.106
PCDE
SX-2123
Intermodulation
Features
System
Noise Figure at
Maximum Gain
6 dB
In-built Donor antenna and Service antenna.
Automatic
Digital gain
control and Antenna Feedback Cancellation (AFC)
System
Group
Delay
7feature
sec
that can reduce the isolation requirement up to 30dB.
Input
VSWR
Support
up to 2 WCDMA channels in 30MHz instantaneous bandwidth. 1.5
50 Ohm
Impedance
Functional Block Diagram
FUNCTIONAL BLOCK DIAGRAM
Mobile Ant
LNA1
DL Digital
Filter
Donor Ant
DT
PA1
Duplexer
PA2
Duplexer
UL Digital
Filter
LNA2
MT
Mobile
Main Control Unit

BTS
www.leax.com
Revision A
91
GSM1800 Bandwidth Adjustable Pico Repeater, 1805 1855 or 1855 1880 & 1710 1760 or
1760 1785 MHz
GSM1800 Bandwidth Adjustable Pico Repeater

1805 1855 or 1855 1880 and 1710 1760 or 1760 1785 MHz
PRODUCT FEATURES
In-Double Side-Band adjustable from 2 MHz to 25 MHz
for downlink operating band
UL fixed 2 5MHz operating band and central frequency adjustable.
IF filtering technology adopted for in-band signal selection and
out-of-band signal suppression
With integrated antenna (6dBi gain) and option for connecting
external antenna
Broadband linear power amplifier ensures undistorted amplification
of GSM1800 signals
Low noise amplifier improves uplink system noise figure for better voice
quality and reduced drop call
System commissioning can be performed without using any additional
tool or equipment
Highly integrated design with miniaturized enclosure, small size, light
weight and easy to install
GSM1800 Bandwidth Adjustable Pico Repeater

SP-1820
Features
RP18-BS15-CA00
Double Side-Band adjustable from 2MHz to 25MHz for downlink operating band.
UL fixed 25MHz operating band and central frequency adjustable.

Dimensions,
(H x W x D)
235 x 150 x 68 mm
ELECTRICAL
1710 1760 or 1760 1785 MHz
1805 1855 or 1855 1880 MHz
2.5 kg
With integrated antenna (6dBi gain) and option for connecting external antenna.
Broadband
linear power amplifier ensures undistorted amplification
GSM1800
Power
Supply
90 264ofVAC
/ 45 65 Hz
signals.
Power
Consumption
Low noise
amplifier improves uplink system noise figure for better voice quality
and
20 W
60 dB
Maximum System Gain
IF filtering technology adopted for in-band signal selection and out-of-band signal
suppression.
WeighT
reduced drop call.
Enclosure
Cooling
System commissioning
can
Convection
Operating Bandwidth, Uplink
2 25* MHz
Operating Bandwidth, DOWNlink
25** MHz
RF Connectors
SMAand
Highly integrated design with miniaturized enclosure, small size, light weight
Gain Adjustment Range, 1 dB step
0 - 20 dB
Output Power, DOWNlink
be performed without using any additional tool or
equipment.
easy to install.
-20 to +40C
Operating
Humidity
Product Description
85%
IP40
With Integrated Antenna
15 1.5 dBm
Environmental Class
Without Integrated Antenna
14 1.5 dBm
that is used to enhance signal strength in small-and-medium-sized areas in a GSM1800 network. The system gain is
MTBF
50,000 hr
compensated automatically according to the temperature variation within the enclosure, which ensures stable operation
Output Power, UPLINK
15 1.5 dBm
6 dB
System Group Delay
6 sec
System Noise Figure at Maximum Gain
SP-1820 GSM1800 Bandwidth Adjustable Pico Repeater is designed for indoor operations. It is a bi-directional amplifier
under ambient temperature functions. It is best suitable for provision of signal coverage within offices and residential
apartments.
FUNCTIONAL BLOCK DIAGRAM

Functional Block Diagram
8 dB
Spurious, f 1MHz
LNA1
9 KHz 1 GHz
ETSI EN 300
609 4 V8.0.2
1 GHz 12.75 GHz
Donor
Ant
Out-of-band Gain
Intermodulation
Absolute Maximum RF Input Power
+10 dBm
Impedance
50 Ohm
P +46 8 752 02 20
MT
DT
PA2
DC 6V Input
* Sliding DL double side-band adjustable range is 2-25MHz

** UL central frequency adjustable
92
UL Frequency
Selective Module
www.leax.com
Mobile
LNA2
Main Control Unit
Set Frequency
PA1
Mobile
Ant
BTS
2.0
Input VSWR
DL Frequency
Selective Module
Set Gain
Display
Revision A
tal
REPEATER ANTENNAS
We now offer a range of repeater antenna solutions on all bands. These antennas are designed to be easily installed and set up on-site. Bands available range
from the lowest 800 MHz to maximum 2500 MHz.
LEAX branded Repeater Antennas

Outdoor Parabolic Antenna, 824 - 896 MHz
Outdoor Yagi Antenna, 890 - 960 MHz
Outdoor Directional Antenna for Microcell, 806 - 960, 1710 - 2300 and 2400 - 2500 MHz
Outdoor Directional Antenna for Microcell, 824 - 960 MHz
Outdoor Directional Antenna for Panel, 1710 - 1880, 1850 - 1990 and 1920 - 2170 MHz
www.leax.com
93
enna
824-896, 18, 18dBi
Outdoor Parabolic Antenna

MHz
824-896
824 - 896 MHz

Vertical / Horizontal
dBi
deg
dB
dB
> 18
> 18
> 18
25
1.5:1
ORA-018V18NA
VPol, 824-896, 18, 18dBi
W
100
50
Direct Ground
Electrical
Frequency Range
Polarization
Gain
Half-Power Beamwidth
Sidelobe Suppression
electrical
Front-To-Back Ratio
Frequency
Range
VSWR
Maximum Power
Polarization
Impedance
gain
Lighting Protection
MHz
824-896
> 18
> 18
> 18
MECHANICAL
25
1.5:1Dimensions, (H x W x D)
100 Weight, without Mounting Kit
50
Weight, witH Mounting Kit
Direct Ground
mm (in)
kg (lb)
kg (lb)
dBi
1200 (47.2)
deg
dB
12 (26.7)
RA09-1818-CA00
dB
16 (35.6)
824 - 896 MHz
W
Aluminum
Alloy
Vertical
/ Horizontal
deg
90 > 18 dBi
Mounting Kit
Half-Power
Beamwidth
deg
12 18 deg
Mechanical
Reflector Material
>18 dB
N-Female
Dimension, Dia
mm (in)
1200 (47.2)
Azimuth Adjustable Range
25 dB
o Front-To-Back Ratio
kg (lb)
CWeight, without Mounting Kit -40 to +55
12 (26.7)
VSWR
1.5:1
Weight, with Mounting Kit
kg (lb)
16 (35.6)Elevation Adjustable Range
km/h (mph)
210 (130.5)
Reflector
Material
Aluminum
Alloy
Connector Type
Maximum Power
100 W
Azimuth Adjustable
Range
deg
90
mm Lightning
(in)
1290x380x1290
(50.7x15.7x50.7)
Protection
Direct
Ground
Elevation Adjustable Range
deg
12 Operational Temperature
kg (lb)
20 (44.4)
Connector Type
N-FemaleOperational Wind Speed
Impedance
50 Ohm
Operational Wind Speed
Shipping Dimensions, HxWxD
Shipping Weight
C
km/h (mph)
mm (in)
kg (lb)
-40 to +55
Shipping Dimensions,
210 (130.5)
(H x W x D)
1290x380x1290 (50.7x15.7x50.7)
Shipping Weight
20 (44.4)
1200 mm (47.2 in)

12 kg (26.7 lb)
16 kg (35.6 lb)
Pole Mount included
Aluminum Alloy
90 deg
12 deg
N-Female
-40 to +55C
210 km/h (130.5 mph)
1290 x 380 x 1290 mm
(50.7 x 15.7 x 50.7 in)
20 kg (44.4 lb)
Antenna
Pattern
antenna
pattern
Vertical
pattern
Horizontal
pattern
870MHz
94
P +46 8 752 02 20
www.leax.com
Revision A
880 - 960 MHz
electrical

Frequency
Range
RA09-1818-CA01
880 -
960 MHz
MECHANICAL
Weight, without Mounting Kit

Polarization

gain
> 18 dBi

Mounting Kit
Half-Power
Beamwidth
> 18 deg
REFLECTOR MATERIAL
Upper Sidelobe Suppression
>18 dB

Front-To-Back Ratio
> 25 dB
VSWR

1.4:1
Connector Type
W
Maximum
Power
100
Lightning
Protection
Direct Ground

Impedance
50 Ohm

(H x W x D)
Shipping Weight
1200 mm (47.2 in)

12 kg (26.7 lb)
16 kg (35.6 lb)
Pole Mount included
Aluminum Alloy
90 deg
15 deg
N-Female
-40 to +70C
210 km/h (130.5 mph)
1290 x 380 x 1290 mm
(50.7 x 15.7 x 50.7 in)
20 kg (44.4 lb)
antenna pattern
www.leax.com
Revision A
95
1710-1880, 11, 22.5dBi

Outdoor Parabolic
1710-1880Antenna
MHz
1710 - 1880 MHz> 22.5

dBi
deg
dB
dB
10.5
> 18
> 35
1.4:1
VPol, 1710-1880,
11, 22.5dBi
WORA-011V23NC
100
50
Direct Ground
Electrical
Frequency Range
Polarization
Gain
Front-To-Back Ratio
electrical
VSWR
Maximum Range
Power
Frequency
Impedance
Polarization
Lighting Protection
MHz
1710-1880
> 22.5
10.5
> 18
> 35
1.4:1MECHANICAL
100 Dimensions, (H x W x D)
50
Direct Ground
mm (in)
kg (lb)
kg (lb)
800 (31.5)
dBi
deg
8 (17.6)
dB
dB
10 (22.0)
RA21-1123-CA00
Pole Mount1710
included
-W1880 MHz
Aluminum
Alloy
Vertical
/ Horizontal
deg
90
gain
> 22.5 dBi
Mechanical
Mounting Kit
Half-Power
Beamwidth
deg
15 10.5 deg
Dimension,
Dia
mm
(in)
800
(31.5)
Reflector Material
>18 dB
N-Female
kg (lb)
8 (17.6)
o Front-To-Back
Ratio
>
35
dB
kg (lb)
10 (22.0)
CWeight, with Mounting Kit
-40 to +70
Mounting Kit
Pole Mount included
VSWR
1.4:1
km/h (mph)
210 (130.5)
Reflector Material
Aluminum Alloy
Connector Type
Maximum Power
100 W
Azimuth Adjustable
Range
deg
90
mm (in)
900x290x900
(35.4x11.4x35.4)
Lightning
ProtectionRange
Direct
Elevation Adjustable
degGround
15 Operational Temperature
kg (lb)
13 (28.6)
Connector Type
N-Female
Impedance
50 Ohm
Shipping Weight
C
km/h (mph)
mm (in)
kg (lb)
-40 to +70
210 (130.5)
(H x W x D)
900x290x900 (35.4x11.4x35.4)
13 (28.6)Shipping Weight
800 mm (31.5 in)

8 kg (17.6 lb)
10 kg (22.0 lb)
Pole Mount included
Aluminum Alloy
90 deg
15 deg
N-Female
-40 to +70C
210 km/h (130.5 mph)
900 x 290 x 900 mm
(35.4 x 11.4 x 35.4 in)
13 kg (28.6 lb)
Antenna Pattern
antenna pattern
Vertical
pattern
Horizontal
pattern
1820MHz
96
P +46 8 752 02 20
www.leax.com
Revision A
enna
, 1850-1990, 8, 24.5dBi

1850-1990
1850 - 1990 MHz
MHz
dBi
> 24.5
deg
8
>
18
dB
dB
> 35
ORA-008V25NP
VPol, 1850-1990, 8, 24.5dBi
1.4:1
W
100
50
Direct Ground
Electrical
Frequency Range
Polarization
Gain
Upper Sidelobe Suppression
Front-To-Back Ratio
VSWR
electrical
Maximum Power
Frequency
ImpedanceRange
Lighting Protection
Polarization
mm (in)
kg (lb)
kg (lb)
MHz
dBi
deg
dB
dB
1850-1990
> 24.5
8
> 18
> 35
1.4:1MECHANICAL
100
Direct Ground
1200 (47.2)
10 (22.0)
RA21-0825-CA00
W
14 (30.8)
1850 -1990 MHz
Vertical
/ Horizontal
Pole Mount
included
gain
>
24.5
dBi
Aluminum Alloy
Mechanical
Mounting Kit
8 deg
Dimension, Dia
mm (in)
1200 (47.2)
90
deg
Upper
Sidelobe
Suppression
>18
Weight,
without
Mounting Kit
kg
(lb)dB
10 (22.0)REFLECTOR MATERIAL
15kg (lb)
deg
Weight, with Mounting
Kit
14 (30.8)Azimuth Adjustable Range
Front-To-Back
Ratio
> 35 dB
Mounting Kit
Pole Mount included
N-Female
VSWR
1.4:1
Reflector Material
Aluminum Alloy
o
C
-40 to +70
90 Connector Type
Azimuth Adjustable
Range
deg
Maximum
Power
100 W
15
deg
km/h Lightning
(mph)
200 (124.3)
Protection
Direct Ground
Connector Type
N-Female
50COhm
Operational
Temperature
-40 to +70
mmImpedance
(in)
1290x380x1290 (50.7x15.7x50.7)
km/h (mph)
200 (124.3)
kg (lb)
16 (35.2)
Shipping Dimension, HxWxD
mm (in)
1290x380x1290 (50.7x15.7x50.7)
(H x W x D)
o
Shipping Weight
kg (lb)
16 (35.2)
Shipping Weight
1200 mm (47.2 in)

10 kg (22.0 lb)
14 kg (30.8 lb)
Pole Mount included
Aluminum Alloy
90 deg
15 deg
N-Female
-40 to +70C
200 km/h (124.3 mph)
1290 x 380 x 1290 mm
(50.7 x 15.7 x 50.7 in)
16 kg (35.2 lb)
Antenna Pattern
antenna pattern
Vertical
pattern
Horizontal
pattern
1920MHz
www.leax.com
Revision A
97
enna
, 1920-2170, 12, 23dBi

1920-2170
1920 - 2170 MHz
MHz
dBi
> 23
deg
12
>
18
dB
dB
> 25
ORA-012V23NF
VPol, 1920-2170, 12, 23dBi
1.4:1
W
100
50
Direct Ground
Electrical
Frequency Range
Polarization
Gain
Front-To-Back Ratio
VSWR
electrical
Maximum Power
Frequency
ImpedanceRange
Lighting Protection
Polarization
mm (in)
kg (lb)
kg (lb)
MHz
dBi
deg
dB
dB
1920-2170
> 23
12
> 18
> 25
1.4:1MECHANICAL
100
Direct Ground
800 (31.5)
8 (17.6)
RA21-1223-CA00
W
10 (22.0)
1920 -2170 MHz
Vertical
/ Horizontal
Pole Mount
included
gain
>
23 dBi
Aluminum Alloy
Mechanical
Mounting Kit
12 deg
Dimension, Dia
mm (in)
800 (31.5)
deg
90
Upper
Sidelobe
Suppression
>18
Weight,
without
Mounting Kit
kg
(lb)dB
8 (17.6)REFLECTOR MATERIAL
deg
15kg (lb)
10 (22.0)
Front-To-Back Ratio
> 25 dB
Mounting Kit
Pole Mount included
N-Female
VSWR
1.4:1
Aluminum Alloy
o Reflector Material
C
-40 to +70
Azimuth Adjustable
Range
deg
90 Connector Type
Maximum
Power
100 W
deg
15
km/h Lightning
(mph)
210 (130.5)
Protection
Direct Ground
Connector Type
N-Female
Operational
Temperature
50COhm
-40 to +70
mmImpedance
(in)
900x290x900 (35.4x11.4x35.4)
km/h (mph)
210 (130.5)
kg (lb)
13 (28.6)
mm (in)
900x290x900 (35.4x11.4x35.4)
(H x W x D)
o
Shipping Weight
kg (lb)
13 (28.6)
Shipping Weight
800 mm (31.5 in)

8 kg (17.6 lb)
10 kg (22.0 lb)
Pole Mount included
Aluminum Alloy
90 deg
15 deg
N-Female
-40 to +70C
210 km/h (130.5 mph)
900 x 290 x 900 mm
(35.4 x 11.4 x 35.4 in)
13 kg (28.6 lb)
Antenna Pattern
antenna pattern
Vertical
pattern
Horizontal
pattern
2045MHz
98
P +46 8 752 02 20
www.leax.com
Revision A
Frequency Range (MHz)

890-960
Vertical
13
40
40
26
1.5:1
100
50
Outdoor Yagi Antenna

890 - 960 MHz
Specifications
990x195x105 / 39.0x7.8x4.1
1.3 / 2.8
1.4 / 3.0
Pole Mount included
N-Female
-40 to +60
95
150 / 200
1000x200x110 / 39.4x15.7x4.3
1.5 / 3.3
Direct Ground
electrical
Frequency Range
Polarization
YA13-0809-CA00
890 - 960 MHz

Vertical
MECHANICAL
gain
13 dBi
horisontal Beamwidth
40 deg
Mounting Kit
VERTICAL Beamwidth
40 deg
Connector Type
Front-To-Back Ratio
26 dB
VSWR
1.5:1
Maximum Power
Impedance
990 x 195 x 105 mm (39.0 x 7.8 x 4.1 in)
100 W
Direct Ground
50 Ohm
1.3 kg (2.8 lb)

1.4 kg (3.0 lb)
Pole Mount included
N-Female
-40 to +60C
95%
150/200 km/h
(H x W x D)
1000 x 200 x 110 mm

(39.4 x 15.7 x 4.3 in)
Shipping Weight
www.leax.com
1.5 kg (3.3 lb)
Revision A
99
0-2170MHz, 40, 12.5dBi

MHz
dBi
deg
deg
dB
W
1710-1880Yagi1850-1990
Outdoor
Antenna
Vertical
12.0
1710 11.5
- 2170 MHz
1920-2170
12.5
40
38
36
32
> 15
1.5:1
> 20
1.5:1 (typ.)
100
VPol, 1710-2170MHz,
40, 12.5dBi
OYI-040V12K0
50
Direct Ground
Electrical
mm (in)
kg (lb)
kg (lb)
Frequency Range
MHz
1710-1880
1850-1990
1920-2170
Polarization
Vertical
Gain
dBi
11.5
12.0
12.5
Horizontal Beamwidth
deg
40
36
Vertical Beamwidth
deg
38
32
electrical
YA12-1721-CA00
Front-To-Back Ratio
dB
> 15 MECHANICAL
> 20
VSWR
1.5:1
1.5:1 (typ.)
Frequency Range
1710-1880 MHz 1850-1990 MHz 1920-2170 MHz
720 x 102 x 38 mm (28.3 x 4.0 x 1.5 in)
Maximum Power
W
100
Polarization
Vertical
Weight,
1.0 kg (2.2 lb)
Impedance
50 without Mounting Kit

Lighting
Protection
Direct
Ground
gain
11.5 dBi
12.0 dBi
12.5 dBi
1.3 kg (2.8 lb)
720x102x38 (28.3x4.0x1.5)
1.0 (2.2)
1.3 (2.8)
Pole Mount included
Brass
Aluminum
40 deg
36 deg
Mounting Kit
N-Female, Bottom
Mechanical
Vertical
Beamwidth
38
deg
32
deg
Radiating Element Material
o
Dimensions, HxWxD
(in)
720x102x38 (28.3x4.0x1.5)
C
-55 to mm
+70
Front-To-Back
Ratio
>15
>20
Boom
Material
Weight, without
Mounting Kit
kg (lb)
1.0 (2.2)
95kg (lb)
%
1.3 (2.8)
vswr
1.5:1
1.5:1 (typ.)
Connector Type
Mounting Kit
Pole Mount included
m/h (mph)Maximum
200 (124.3)
100 W
Operational
Temperature
RadiatingPower
Element Material
Brass
Boom Material
Aluminum
mm (in) Lightning
790x110x100
(31.1x4.3x3.9)
Protection
Direct Ground
Connector Type and Location
N-Female, Bottom
kg (lb) Impedance
1.4
(3.1)
50
Ohm
Operational
Wind Speed
C
-55
to +70
o
Survival Wind Speed
Shipping Weight
%
km/h (mph)
mm (in)
kg (lb)
Shipping
95 Dimensions,
(H x (124.3)
W x D)
200
790x110x100
(31.1x4.3x3.9)
Shipping
Weight
1.4 (3.1)
Pole Mount included

Brass
Aluminum
N-Female, Bottom
-55 to +70C
95%
200 km/h (124.3 mph)
790 x 110 x 100 mm
(31.1 x 4.3 x 3.9 in)
1.4 kg (3.1lb)
Antenna
Pattern
antenna
pattern
Vertical
pattern
Horizontal
pattern
1710MHz
100
P +46 8 752 02 20
1920MHz
2170MHz
www.leax.com
Revision A
20MHz-2170, 40, 11.5dBi

MHz
1920 - 2170 MHz1920-2170

Vertical
11.5
40
35
OYI-040V12F0
VPol, 1920MHz-2170, 40, 11.5dBi
> 15
1.4:1
100
50
Electrical
Direct Ground
Frequency Range
MHz
dBi
deg
deg
dB
W
mm (in)
kg (lb)
kg (lb)
Polarization
Gain
Vertical Beamwidth
Front-To-Back Ratio
electrical
VSWR
Maximum Power Input
Frequency Range
Impedance
Polarization
Lighting Protection
dBi
deg
deg
dB
1920-2170
Vertical
11.5
40
35
> 15
MECHANICAL
1.4:1
100
450 x 65 x 100 mm (17.7 x 2.6 x 4.3 in)
50
Weight,
without
Mounting
Kit
1.0 kg (2.2 lb)
Direct Ground
450x65x110YA21-4012-CA00
(17.7x2.6x4.3)
W
1.01920
(2.2)
- 2170 MHz
1.3 (2.8)
Vertical
gain
dBi
Pole Mount11.5
included
Mechanical
Mounting Kit
VERTICAL
Beamwidth
40
deg
Aluminum
Dimensions, HxWxD
mm (in)
450x65x110 (17.7x2.6x4.3)
35 dB
Aluminum
kg (lb)
1.0 (2.2)
Boom
Front-To-Back
Ratio
> (lb)
15 dB
Kit
kg
1.3
(2.8)Material
N-Female
Mounting Kit
Pole Mount
includedType
Connector
VSWR
1.4:1
o
Aluminum
C
-55 to +70
Maximum
Power
100 W
Boom Material
Aluminum
Direct
95 Ground
%
ConnectorProtection
Type
N-Female
Lightning
C
-55 to +70
km/h (mph)
200 (124.3)
Impedance
50 Ohm
95
%
mm (in) Operational Wind Speed
490x170x105km/h
(19.3x6.7x4.1)
(mph)
200Shipping
(124.3) Dimensions,
(H x W x D)
mm (in)
490x170x105 (19.3x6.7x4.1)
kg (lb) Shipping Weight
1.4 (3.1)
kg (lb)
1.4
(3.1) Weight
Shipping
o
1.3 kg (2.8 lb)

Pole Mount included
Aluminum
Aluminum
N-Female
-55 to +70C
95%
200 km/h (124.3 mph)
490 x 170 x 105 mm
(19.3 x 6.7 x 4.1 in)
1.4 kg (3.1lb)
Antenna Pattern
antenna pattern
Vertical
pattern
Horizontal
pattern
1920MHz
2045MHz
2170MHz
www.leax.com
Revision A
101
806-960
2400-2500
Outdoor 1710-2300
Directional
Antenna
for Microcell
Vertical
806 - 960, 1710

-2300 and 2400
9.7
11.0
11.0- 2500 MHz
75
60
55
58
48
48
> Antenna
22
Outdoor Directional
for Microcell
1.4:1
ODM-075V11N0
VPol, 806-960/1710-2500MHz, 75, 11.0dBi
100
50
Direct Ground
Electrical
Frequency Range
Polarization
Gain
Vertical Beamwidth
Front-To-Back Ratio
VSWR
electrical
Maximum Power
Frequency
ImpedanceRange
Polarization
MHz
806-960
dBi
deg
deg
dB
9.7
75
58
1710-2300
2400-2500
Vertical
11.0
11.0
60
55
48
48
> 22
1.4:1
MECHANICAL
100
Dimensions,
(H x W x D)
480 x 282 x 54 mm (18.9 x 11.1 x 2.1 lb)
50
Direct Ground
Weight,
without Mounting Kit
1.5 kg (3.3 lb)
480x282x54 (18.9x11.1x2.1)
DA09-7511-CA00
W
806-960
MHz
1710-2300
1.5
(3.3)
MHz 2400-2500 MHz
Vertical
1.7 (3.7)
gain
9.7 dBi
11.0 dBi
11.0 dBi
Mechanical
PVC,
Light
Grey,
RAL7035
75 deg
60 deg
55 deg
Radome Material and Color
Dimensions, HxWxD
mm (in)
480x282x54 (18.9x11.1x2.1)
Mounting
Vertical
Beamwidth
58 deg
48 (lb)
deg
48 deg
Weight,
without
Mounting
Kit
kg
1.5 (3.3)Kit
Wall or pole
mount kg
included
Kit
(lb)
1.7 (3.7)Element Material
Radiating
Front-To-Back
Ratio
> 22
dB
Radome Material and Color Brass
PVC, Light Grey, RAL7035
and Location
VSWR
1.4:1
Mounting Kit
Wall orConnector
pole mountType
included
RadiatingPower
Element
Material
Brass
Operational
Temperature
Maximum
100 W
N-Female,
Bottom
N-Female, Bottom
Direct Ground
C
-55 to +70
-55
to
+70
Operational
Wind Speed
Impedance
50%
Ohm
95
200 (124.3)
km/h (mph)
Shipping
Dimensions,
95
mm (in)
560x393x133
(22x15.5x5.2)
(H x W x D)
Shipping Weight
2.0 (4.4)
200 (124.3)kg (lb)
Shipping Weight
560x393x133
(22x15.5x5.2)
Antenna
Pattern
antenna pattern
2.0 (4.4)
o
1.7 kg (3.7 lb)

Wall or pole mount included
Brass
N-Female, Bottom
-55 to +70C
95%
200 km/h (124.3 mph)
560 x 393 x 133 mm
(22 x 15.5 x 5.2 in)
2.0 kg (4.4 lb)
Vertical
pattern
Horizontal
pattern
870MHz
102
P +46 8 752 02 20
1880MHz
2500MHz
www.leax.com
Revision A
Outdoor Directional Antenna for Microcell, 824 - 960 MHz
rectional Antenna for Microcell
8B0
VPol, 824-960MHz, 30, 18dBi
Specifications
width
dth
atio
tion
Outdoor Directional Antenna for Microcell

824 - 960
MHz
MHz
824-960
Vertical
dBi
18
deg
30
deg
14
dB
> 33
ODM-030V18B0
VPol, 824-960MHz, 30, 18dBi
1.4:1
W
200
50
Direct Ground
Electrical
Frequency Range
MHz
824-960
Polarization mm (in)
WxD (with reflector)
Mounting Kit Gain
kg (lb)
unting Kit
kg (lb)
Vertical Beamwidth
electrical
l and Color
Front-To-Back Ratio
1251x796x474 (49.3x31.3x18.7) Vertical

dBi
18
20 (44.1)
deg
30
25 (55.1)
deg
14
DA09-3018-CA00
PVC,dB
Light Grey, MECHANICAL
RAL7035
> 33
Dimensions, (H x
W 1.4:1
x D)
1251 x 796 x 474 mm
Frequency
Range
824 - 960 MHzSJA-B-12R(16)
VSWR
With reflector
(49.3 x 31.3 x 18.7 in)
Maximum Power
W
200
nt Material
PCB
Polarization
Vertical
50
Weight, without Mounting
Kit
20 kg (44.1 lb)
and Location Impedance
N-Female,
Bottom
gain
18 dBi
Direct Ground
o
perature
C
-30 to +55
25 kg (55.1 lb)
30 deg
95 Radome Material and Color
midity
%
Mechanical
Vertical
Beamwidth
14 deg
d Speed
km/h (mph)
200 (124.3)
MOUNTING
KIT
Dimensions, HxWxD (with reflector)
mm (in)
1251x796x474
(49.3x31.3x18.7) SJA-B-12R (16)
Antenna
1465x320x275
(57.7x12.6x10.8)
Front-To-Back Ratio
> 33 dB
Weight, without
Mounting
kg (lb)
20
(44.1)
mm
(in) Kit
PCB
Reflector VSWR
1215x570x115
(47.8x22.4x4.5)25 (55.1)
30 degkg (lb)
Connector
Type
and
Location
N-Female,
Bottom
Antenna
27 (59.5)
Radome Material
Maximum
Powerkgand
200 W
(lb)Color
Reflector
8 (17.6)Operational
Temperature
-30 to +5C
Mounting Kit
SJA-B-12R(16)
attern
Lightning
Protection
Radiating Element
Material
Direct Ground

Impedance
50 Ohm
Antenna
Shipping
Dimensions
Reflector
Antenna
Shipping Weight
Reflector
PCB
95%
N-Female, Bottom
Operational -30
Wind
Speed
200
km/h
(124.3 mph)
to +55
95 (H x W x D)
200 (124.3)
Antenna
1465x320x275 (57.7x12.6x10.8) 1465 x 320 x 275 mm (57.7x12.6x10.8 in)
1215x570x115 (47.8x22.4x4.5) 1215 x 570 x 115 mm (47.8 x 22.4 x 4.5 in)
Reflector
27 (59.5)
Shipping weight Antenna
27 kg (59.5 lb)
8 (17.6)
Reflector
8 kg (17.6 lb)
C
%
km/h (mph)
mm (in)
kg (lb)
Antenna Pattern
antenna pattern
Vertical
pattern
Horizontal
pattern
824MHz
870MHz
824MHz
960MHz
870MHz
960MHz
www.leax.com
Revision A
103
ocell
, 15.5dBi

1710 - 1880, 1850 - 1990 and 1920 - 2170 MHz

VPol, 1710-2170MHz,
30, 15.5dBi
10-1880ODM-030V16K0
1850-1990
1920-2170
Vertical
14.6
15.5
15.1
Electrical
32
Frequency Range
MHz
1710-1880
1850-1990
30
Polarization
Vertical
Gain
dBi
14.6
15.5
26 (typ. 30)
Horizontal>
Beamwidth
deg
32
Vertical Beamwidth
deg
30
Front-To-Back
1.4:1 Ratio
dB 1.5:1
> 26 (typ. 30)
VSWR
1.4:1
100
Maximum Power
W
100
Impedance
50
MECHANICAL
electrical
DA21-3016-CA00
50
Frequency Range
Mechanical
1710-1880 MHz
1850-1990 MHz
1920-2170 MHz
Vertical
Polarization
Dimensions, HxWxD
mm (in)
gain
14.6 Kit
dBi
15.5 dBikg (lb) 15.1 dBi
Weight, without Mounting
Horizontal
Beamwidth
32 deg kg (lb)
Weight, with
Mounting Kit
Radome
Material and Color
Vertical
Beamwidth
30 deg
Mounting Kit
Front-To-Back Ratio
> 26 dB (typ. 30)
VSWR
1.4:1
1.5:1
o
Operational
Temperature
C
Maximum Power
100 W
%
Impedance
50 Ohm
km/h (mph)
mm (in)
Shipping Weight
kg (lb)
280x280x60 (11.0x11.0x2.4)
1.5 (3.3)
1.7 (3.7)
ABS, White
Pipe mount included
Antenna
Pattern
antenna pattern
Brass
TNC, Rear
-55 to +70
Vertical
95
pattern
200 (124.3)
290x280x120 (11.4x11.0x4.7)
2.1 (4.6)
1920-2170
15.1
1.5:1
280 x 280 x 60 mm (11.0 x 11.0 x 2.4 in)
280x280x60 (11.0x11.0x2.4)
1.5 (3.3)
Radome Material
1.7 (3.7)and Color
ABS,
WhiteMaterial
Radiating
Element
Pipe mount included
Brass
Operational
TNC,Temperature
Rear
-55 to
+70
Operational
Humidity
95
200 (124.3)
290x280x120
(11.4x11.0x4.7)
(H x W x D)
2.1 (4.6)
Shipping Weight
1.5 kg (3.3 lb)

1.7 kg (3.7 lb)
ABS, White
Brass
TNC, Rear
-55 to +70C
95%
200 km/h (124.3 mph)
290 x 280 x 120 mm
(11.4 x 11.0 x 4.7 in)
2.1 kg (4.6 lb)
Horizontal
pattern
1710MHz
104
P +46 8 752 02 20
1990MHz
www.leax.com
2170MHz
Revision A
Outdoor Directional Antenna for Panel, 1710 - 1880, 1850 - 1990 and 1920 - 2170 MHz
Directional Antenna for Panel
20K0
VPol, 1710-2170MHz, 30, 20.0dBi
Outdoor Directional Antenna for Panel
Specifications
1710 - 1880, 1850 - 1990 and 1920 - 2170 MHz
ge
MHz
1710-1880
1850-1990
Vertical
Outdoor Directional Antenna for Panel
1920-2170
dBi
20.0
ODP-030V20K0
VPol, 19.5
1710-2170MHz, 30, 20.0dBi
mwidth
deg
33
32
width
deg
7.5
7.0
elobe Suppression
dB
> 18
dB
< 18
Ratio
dB
> 35 (typ. 40)
Electrical
1.4:1
1.5:1
Frequency Range
MHz
1710-1880
1850-1990
1920-2170
modulation @ 2x43
dBm
dBc
< -150
Polarization
Vertical
Gain
dBi
19.5
20.0
er
W
100
deg
33
32
50
Vertical Beamwidth
deg
7.5
7.0
tion
Direct
Ground
First Upper Sidelobe Suppression
dB
> 18
al
Null Fill
dB
< 18
Front-To-Back Ratio
dB
> 35 (typ. 40)
PA21-3020-CA00
VSWR
1.4:1 MECHANICAL
1.5:1
(47.2x12.6x4.3)
@ 2x43 dBm
dBc
<Dimensions,
-150
Frequency
Rangemm (in)1710-1880
MHz 1200x320x110
1850-1990
MHz 1920-2170
MHz
(H x W x D)
1200 x 320 x 110 mm (47.2 x 12.6 x 4.3 in)
Maximum Power kg (lb)
W
100
KitPolarization
Vertical 8 (17.6)
Weight,
without Mounting Kit
8 kg (17.6 lb)
50
Impedance
kg (lb)
13 (28.7)
gain
19.5 dBi
20.0 dBi
Lighting Protection
DirectWeight,
GroundwitH Mounting Kit
13 kg (28.7 lb)
xWxD
t Mounting
ounting Kit
al and Color
electrical
Mechanical
rial
Dimensions,
HxWxD
Upper Sidelobe
ent Material First
Suppression
e and Location Weight, with Mounting Kit
null fill
o
Radome Material and
mperature
CColor
Mounting Kit Ratio%
Front-To-Back
midity
Reflector Material
nd Speed
km/h (mph)
vswr
Order
nsions, HxWxD3rd
(in)
Connector Type mm
and Location
Intermodulation
ht
kg
(lb)
Operational
Temperature
dBm
Pattern
Vertical Beamwidth
@ 2x43
Fiberglass, Light Grey, RAL7035

32 deg
SJA-B-12R(16)
7.5 deg
7.0
deg
Mounting Kit
Aluminum
mm
1200x320x110 (47.2x12.6x4.3)
> (in)
18 Zinc
dB
Composite
Reflector Material
kg (lb)
8 (17.6)
7/16
kg
(lb) DIN-Female, Bottom
13 (28.7)
< 18 dB
-55 to +70
SJA-B-12R(16)
> 35 dB (typ. 40) 95
Aluminum
200 (124.3)
1.4:1
1.5:1
Zinc Composite
1460x365x160 (57.5x14.3x6.3)
7/16 DIN-Female, Bottom
o
15 (33.1)
Wind Speed
C
-55 Operational
to +70
< -150
dBc
33 deg
Maximum
Power
Operational
Wind Speed
Lightning
Protection HxWxD
Shipping Weight
Impedance
%
W
km/h 100
(mph)
mm
Direct(in)
Ground
kg (lb)
50 Ohm
Shipping
95
Dimensions,
200 (124.3)
(H x W x D)
1460x365x160 (57.5x14.3x6.3)
Shipping Weight
15 (33.1)

SJA-B-12R(16)
Aluminum
Zinc Composite
7/16 DIN-Female, Bottom
-55 to +70C
95%
200 km/h (124.3 mph)
1460 x 365 x 160 mm
(57.5 x 14.3 x 6.3 in)
15 kg (33.1 lb)
Antenna
Pattern
antenna
pattern
Vertical
pattern
Horizontal
pattern
1710MHz
1710MHz
1990MHz
1990MHz
2170MHz
2170MHz
www.leax.com
Revision A
105
INDOOR ANTENNAS
We now offer a range of indoor antenna solutions on all bands. These antennas are designed to be easily installed and set up on-site. Bands available range
from the lowest 670 MHz to maximum 2700 MHz.
LEAX branded Indoor Antennas

Indoor Omni-directional Ceiling Mounted Antenna, 670 - 960 and 1710 - 2700 MHz
Indoor Omni-directional Ceiling Mounted Antenna, 806 - 960 and 1710 - 2700 MH
Indoor Directional Wall Mounted Antenna, 806 - 960, 1710 - 2500 and 2500 - 2700 MHz
Indoor Directional Wall Mounted Antenna, 698 - 960, 1710 - 2700 MHz
106
P +46 8 752 02 20
www.leax.com
Indoor Omni-directional Ceiling Mounted Antenna

670 - 960 and 1710 - 2700 MHz

IXD-360V03NN(05)
V Pol, 360
670-960/1710-2700MHz
2.0/4.0 dBi
ELECTRICAL
Indoor
Omni-directional Ceiling Mounted Antenna
IXD-360V03NN(05)
Parameters
/ Specifications
V
Pol, 360
670-960/1710-2700MHz
Polarization
2.0/4.0
dBi
Polarization
Gain (dBi)
Gain
HorizontalSpecifications
Beamwidth ()
Electrical
Horizontal
Beamwidth
Vertical Beamwidth
()
VSWR Beamwidth
Vertical
IMD3 (2x33 dBm Carrier) (dBc)
VSWR
Maximum Power Per Port (W)
IMD3
( 2x43 dBm Carrier)
Polarization
Impedance
()
2.5:1
2.5:1
670-696
696-806
2.5:1
100-120
2.0:1
Shipping Dimensions, HxWxD (mm) / (in)

Environmental Class
Environmental Class
100-120
Frequency
Range (MHz)
100-1202.0:1
Length (mm) / (in)

Dimensions,
x W x D)Kit (kg) / (lb)
Weight, w/o (H
Mounting
Radome
Material
and Color
Weight,
w/o
Mounting
KiT
Mechanical
Specifications
Connector
Type and Color
Parameters
Radome
Material
Operational
Temperature
(C)
Dimensions,
Diameter
x Length (mm)
/ (in)
Connector
Type Kit
and
Weight,
w/o Mounting
(kg)Location
/ (lb)
Mounting
Radome
Material
and
Color
Operational
Temperature
HxWxD (mm) / (in)
Connector Type
ShippingTemperature
Weight (kg)
Mounting
Operational
(C) / (Ib)
Mounting
Environmental
Class
Shipping
Dimensions
Shipping Weight
(kg) / (Ib)
Shipping
Weight
670-960
806-960
806 - 960
MHz
VerticalVertical
2 dBi
Horizontal Beamwidth ()
VSWR
Parameters
Maximum
Power Per Port (W)
mechanical
Impedance
()
Dimensions,
Diameter x
670-960
670 - 960 MHz
696-806
670 - 696 MHz 670-696696 - 806 MHz
Gain (dBi)
Maximum
Power Per Port
Vertical Beamwidth ()
Impedance
CA36-0627-CA00
FREQUENCY RANGE
2.0:1
806-960
Vertical
360
1710-2700
1710 - 2700 MHz
1710-2500
2500-2700
1710
- 2500 MHz
2500
- 2700 MHz
360
1710-2700
<-140
100
2500-2700
<-140 dBc 50
100 W 4
1710-2500
360
<-140
4
4 dBi
30-65
1.5:1 30-65
1.5:1
30-65
50 Ohm
1.5:1
Specifications
100
50 / 8.2x4.5
208x112
0.4 /208
0.9 x 112 mm ( 8.2 x 4.5 in)
ABS, White 0.4 kg / 0.9 lb
N-Female
Specifications
ABS, White
-40 to +60
208x112 / 8.2x4.5
0.4 / 0.9
Ceiling Mounted N-female
ABS, White
-40 to +60C
175x175x175
/ 6.9x6.9x6.9
N-Female
0.5 / 1.1 Ceiling Mounted
-40 to +60
Ceiling Mounted
Indoor
175
x 175 x 175 mm (6.9 x 6.9 x 6.9 in)
175x175x175 / 6.9x6.9x6.9
0.5 / 1.1
Indoor
0.5 kg (1.1 lb)

Indoor
Connector Position & Installation Drawing
CONNECTOR Position
POSITION &
& installation
guide
Connector
Installation Drawing
670-960
670-960
1710-2700
1710-2700
N- F
N- F
www.leax.com
Revision A
107

698 - 960 and 1710 - 2700 MHz

IXD-360VH03NN
Indoor
Omni-directional
Ceiling Mounted Antenna
VH Pol,
360
698-960/1710-2700MHz
IXD-360VH03NN
3.5/5.5dBi
VH Pol,
360
698-960/1710-2700MHz
Electrical
Specifications
3.5/5.5dBi
ELECTRICAL
CA36-0727-CA00
FREQUENCY RANGE
Electrical
Specifications
Parameters
/ Specifications
698 - 960 MHz
698-960
1710-2700
1710 - 2700 MHz

698 - 790 MHz 698-790
790 - 960 MHz
1710 - 2170 MHz 1710-2170
1710 - 2700 MHz
790-960
698-960
1710-2700
Dual linear V&H Dual linear V&H
Parameters
/ Specifications
Polarization
Polarization
Gain (dBi)
3.5698-790
dBi
Gain
Polarization
Horizontal
Beamwidth
Vertical Beamwidth
()
Gain (dBi)
Vertical
Beamwidth
VSWR
Isolation
Between
Ports
VSWR
Vertical
Beamwidth
()
IMD3 ( 2x33 dBm Carrier) (dBc)
VSWRIMD3
( 2x43 dBm Carrier)
Maximum
Isolation
Between Power
Ports Per Port (W)
Power
Per Port
Impedance
() (dBc)
IMD3 (Maximum
2x33 dBm Carrier)
Maximum
Power Per Port (W)
Impedance
Impedance ()
3.5
40-90
3.5
40-90
40-90
18
Mechanical
Specifications
mechanical
Parameters
Mechanical
Specifications
Dimensions,
(H x W x D)
Dimensions, Diameter
x Length (mm) / (in)
Parameters
Weight,
w/o
Mounting
KiT/ (lb)
Weight, w/o
Mounting
Kit (kg)
Dimensions, Diameter x Length (mm) / (in)
Radome Material
Material and
Color
Radome
and
Color
Weight, w/o Mounting Kit (kg) / (lb)
Connector
Type
Connector
Type
and Location
Radome
Material and
Color
Operational
Temperature (oC)
Connector
Type
Mounting
Operational
Temperature (oC)
Mounting
Mounting
Shipping
Dimensions
Shipping
Weight
(kg) / (mm)
(Ib) / (in)
Shipping
Dimensions,
HxWxD
Environmental
Class
Shipping
Weight (kg)
/ (Ib)
Shipping
Weight
Environmental
Class
Environmental
Class
4.5790-960
dBi
4.5
5.01710-2170
dBi
Dual
linear V&H 360
360
80-115
4.5
5.0
80-115
2.0:1
360 50-100
18 2.0:1
80-115
50-100
-140
<-1402.0:1
dBc
50 W
-140
50
50 Ohm
50
50
50
5.0
5.52170-2700
dBi
50-100
5.5
40-70
20
40-70
2170-2700
5.5
40-70
20
Specifications
210
x 35 mm/ 8.3x1.4
( 8.3 x 1.4 in)
210x35
Specifications
0.4
kg/ (0.9
0.4
0.9 lb)
210x35 / 8.3x1.4
ABS,white
ABS, White
0.4 / 0.9
N-female
ABS,white22xxN-Female
-20 to +45
2 x N-Female
-20 to +45C
Ceiling Mounted
-20 to +45
Ceiling Mounted
/ 8.2x8.2x8.4
Ceiling205x205x210
Mounted
205 x 205
x 210
mm
(8.2 x 8.2 x 8.4 in)
0.6
/ 1.3
205x205x210
/ 8.2x8.2x8.4
0.6 / 1.3 0.6 Indoor
kg (1.3 lb)
Indoor
Indoor
Connector Position & Installation Guide
Connector
Position
Guide
CONNECTOR
POSITION&&Installation
installation guide
698-960
698-960
698-9601710-2700 698-960 1710-2700

1710-2700
1710-2700
N- F
108
N- F
N- F
N- F
P +46 8 752 02 20
www.leax.com
Revision A

806 - 960 and 1710 - 2700 MHz

IXD-360VH03NT
IndoorVHOmni-directional
Ceiling Mounted Antenna
Pol 360
806-960/1710-2700MHz
IXD-360VH03NT
2/4dBi
VH Pol 360
ELECTRICAL
806-960/1710-2700MHz
2/4dBi Electrical Specifications
Electrical
Specifications
Parameters
/ Specifications
Polarization
Parameters
/ Specifications
Gain
Polarization
GainHorizontal
(dBi)
Beamwidth
Beamwidth ()
PolarizationHorizontal
Vertical Beamwidth
Gain (dBi) Vertical Beamwidth ()
VSWR
Horizontal VSWR
Beamwidth ()
Isolation
Between
Ports
Isolation
Between
Ports (dB)
Vertical Beamwidth
()
IMD3IMD3
( 2x33
dBmdBm
Carrier)
(dBc)
VSWR
( 2x43
Carrier)
Maximum
Power
Per Port (W)
Isolation Between
Ports
(dB)Power
Maximum
Per Port
Impedance
()(dBc)
IMD3 ( 2x33
dBm Carrier)
Impedance
Maximum Power
Per Port (W)
Impedance ()
CA36-0827-CA00
FREQUENCY RANGE
806 - 960 MHz

806-960
806 - 790 MHz
Vertical806-960
806-960
2 dBi Vertical
2
806-960
Vertical8510
8510
2
/
8510

Vertical & Horizontal
1710-2500
2500-2700
1710-2700
4 dBi
4 dBi
Vertical& Horizontal
Parameters
Dimensions,
(H xKit
W (kg)
x D) / (lb)
Weight,
w/o Mounting
Radome
Material
Color
Weight,
w/oand
Mounting
KiT
Connector
Type
Radome
Material and Color
Radome Material
and Color
Mounting
Connector TypeConnector Type and Location
Mounting Shipping Dimensions, HxWxD (mm) / (in)
Mounting
Shipping
Weight
(kg)
/ (Ib)
HxWxD
(mm)
/ (in)
Environmental
Shipping
Dimensions
Shipping Weight
(kg) / (Ib) Class
Environmental Class
Shipping Weight
1710-2500 360
2500-2700
360
Vertical& Horizontal
5010
4010
5010
4
4
2.0:1
2.0:1
360
5010 22 dB 22
4010 25 dB
2.0:1
<-140 dBc
22
50 W
<-140
5050 Ohm
50
Parameters
mechanical
Mechanical
Specifications

1710 - 2700 MHz
1710-2700
1710 - 2500 MHz
2500 - 2700 MHz
<-140
50
50
4010
25
25
Specifications
178x112 / 7.0x4.4
Specifications178
x 112
0.42
/ 1.1mm ( 7.0 x 4.4 in)
178x112 / 7.0x4.4
ABS,
white
0.42
kg (1.1 lb)
0.42 / 1.1
2 x N-Female
ABS, White
ABS, white
Ceiling Mounted
2 x N-Female
N-female
175x175x1752/ x6.9x6.9x6.9
Ceiling Mounted
Ceiling
0.52
/ 1.1 Mounted
175x175x175 / 6.9x6.9x6.9
175 x 175Indoor
x 175 mm (6.9 x 6.9 x 6.9 in)
0.52 / 1.1
Indoor
Environmental Class
Connector Position & Installation Drawing
0.52 kg (1.1 lb)

Indoor
Connector CONNECTOR
Position POSITION
& Installation
Drawing
& installation
guide
806-960
1710-2700
N- F
806-960
1710-2700
1710-2700
N- F
N- F
1710-2700
N- F
www.leax.com
Revision A
109
Indoor Directional Wall Mounted Antenna, 806 - 960, 1710 - 2500 and 2500 - 2700 MHz
Indoor Directional Wall Mounted Antenna

806 - 960, 1710 - 2500 and 2500 - 2700 MHz
ELECTRICAL
WA90-0827-CA00
806 - 960 MHz
Frequency Range
1710 - 2500 MHz
Indoor
Directional Wall Mounted
Antenna
GAIN
7 dBi
POLARIZATION
IWH-090V08N0-5
2500 - 2700 MHz
Vertical
8 dBi
VPol, 806-960/1710-2700,
90, 8dBi
90 deg
75 deg
Vertical Beamwidth
65 deg
VSWR
1.5:1

@ 2x33 dBm
-140 dBc
Electrical
Power Handling
7 dBi
65 deg
100 W
Frequency Range
Impedance
Polarization
Gain
Horizontal
Beamwidth
Mechanical
Vertical Beamwidth
VSWR
3rd Order Intermodulation @ 2x33 dBm
weight
Power Handling
Impedance
MHz
dBi
deg
deg
dBc
W
806-960
1710-2500
2500-2700
Vertical
7
8
7
90
75
65
65
273 x 173 x 52 mm (10.7
x 6.8 x 2.0 in)
1.5:1
-140
1.7:1
0.6 kg (1.3 lb)
100
ABS, Light Grey, RAL7035
50
50 Ohm
Wall
MOUNT
Mechanical
Reflector Material
Dimensions, HxWxD
Weight
Connector Type
Mount
Environmental
Reflector
Material Class
Shipping Dimensions, (H x W x D)
Connector Type
Environmental
Class
Shipping Weight
Shipping Weight
mm (in)
kg (lb)
Aluminium
273x173x52 (10.7x6.8x2.0)
Aluminium
0.6 (1.3)
ABS, Light Grey, RAL7035
N-Female
Wall
Indoor
Aluminum
Aluminum
338 x 221 x 80 mm (13.3 x 8.7 x 3.1 in)
N-Female
Indoor
0.8 kg (1.8
in)
338x221x80 (13.3x8.7x3.1)
0.8 (1.8)
antenna pattern
Antenna Pattern
Vertical
pattern
Horizontal
pattern
806MHz
110
P +46 8 752 02 20
1710MHz
2500MHz
www.leax.com
Revision A

698 - 960 and 1710 - 2700 MHz

IWH-090V08N0-C
V Pol, 90
698-960/1710-2700MHz
8.0dBi, 7dBi
ELECTRICAL
WA90-0627-CA00
FREQUENCY RANGE
Indoor Directional
Wall Mounted Antenna 698 - 960 MHz
Parameters
Parameters/ /Specifications
Specifications
IWH-090V08N0-C
698 - 800 MHz
V Pol, 90 Polarization
Polarization
698-960/1710-2700MHz
Gain
Gain (dBi)
8.0dBi, 7dBi Horizontal
()
Beamwidth
Vertical Beamwidth
VSWR
VSWR
IMD3
( 2x43 Power
dBm Carrier)
Maximum
Per Port (W)
Impedance
() Per Port
Maximum
Power
Impedance
Polarization
698-960 1710 - 2700 MHz
800 - 960 MHz

698-800
Vertical
6 dBi
1710 - 2700 MHz

800-960
Vertical
7 dBi
8
95
90
55
6 8 dBi
115 95
115
1.8:1
1.8:1
55
<-140 dBc
698-960
698-800
1.5:1
50 W
800-960
50 Ohm
Vertical
8
95
55
6
115
Gain (dBi)
()
mechanical
Vertical Beamwidth
()
Parameters
VSWR
Dimensions,
x W x D)
Dimensions,(H
HxWxD
(mm) / (in)
Weight,w/o
w/o Mounting
Mounting Kit KiT
(kg) / (lb)
Weight,
Maximum Power Per Port (W)
Radome
Material and Color
Impedance ()Radome
Material and Color
-140
1710-2700 50
50
1710-2700
1710-2700
7
90
1.5:1
1710-2700
7
90
Specifications
1.8:1
210 x 180 x 44 kg210x180x44
(8.3 x 1.5:1
7.1 x 1.7
in)
/ 8.3x7.1x1.7
-140
0.6 / 1.3
0.6
kg
/
1.3
lb
50
50 White ABS, White
ABS,
N-Female
N-female -10 to +60
Operational Temperature (oC)
Mechanical
Specifications
Operational
Temperature
-10 to +60CWall Mounted
Mounting
Parameters
Specifications
255x190x60 / 10.1x7.5x2.4
Mounting
Wall mounted
Dimensions, HxWxD (mm) / (in)
210x180x44 / 8.3x7.1x1.7
Shipping
Weight
(kg) / (Ib)
0.8 / 1.7
Shipping
Dimensions
Weight, w/o Mounting
Kit (kg)
/ (lb)
0.6255
/ 1.3x 190 x 60 mm (10.1 x 7.5 x 2.4 in)
Class
Indoor
Radome MaterialEnvironmental
and Color
ABS, White
Shipping Weight
0.8
kg
(1.7
lb)
N-Female
(oC)
-10 to +60
Environmental
Class
Mounting
Wall Mounted
255x190x60 / 10.1x7.5x2.4
Shipping Weight
(kg) / (Ib)
0.8 / 1.7
CONNECTOR
POSITION & installation guide
Environmental Class
Indoor
Indoor
1. Drill four holes in wall per pattern of holes

in plate (item 2) shown above.
Connector Position
& Installation Guide
698-960
1710-2700
2. Attach flat side of plate (item 2) to wall using wall anchors (item 4) and screws (item 3).
698-960
1710-2700
3. Mount antenna (item 1), to plate (item 2).

N- F
4. Connect RF-Cable.
N- F
Installation Steps
Installation Steps

1)
2)
www.leax.com
Drill four holes in wall1)

per pattern
of holes
in plate
(itemper
2) shown
above
Drill four
holes
in wall
pattern
of holes in plate
Attach flat side of plate (item 2) to wall using wall anchors (item 4) and screws (item 3)
(item 2) shown above
Revision A
111

790 - 960 and 1710 - 2700 MHz

IWH-090VR08NT
VX Pol, 90
790-960/1710-2700MHz
6.5dBi, 7.5dBi
ELECTRICAL
WA90-0727-CA00
Indoor
Directional Wall Mounted790Antenna
- 960 MHz
IWH-090VR08NT
FREQUENCY RANGE
790 - 960 MHz
VX Pol, 90
Polarization
Polarization
790-960/1710-2700MHz
Gain
6.5dBi,
7.5dBi
Gain
(dBi)
Horizontal
Beamwidth
()
Electrical
VerticalSpecifications
Beamwidth
()
Vertical
Beamwidth
VSWR
VSWR
Isolation
(dB)dBm Carrier)
IMD3
( 2x43
IMD3 ( 2x33 dBm Carrier) (dBc)
Polarization
Maximum Power Per Port
Gain Maximum
(dBi)
Power (W)
Impedance
Horizontal
Beamwidth
()
Impedance
()
6.5 dBi
7510
8510
65 60
8510
65
1.8:1
/
<-140
dBc
1710-2170
790-960
790-960
Vertical
6.5
8510
65

1710 - 2700 MHz
1710-2700
1710 - 2700 MHz

2300 - 2700 MHz
1710-2170
790-960
45
Vertical
7.5 dBi7.0
6.57.0 dBi
Vertical
VSWR
mechanical
Isolation (dB)
IMD3Dimensions,
( 2x33 dBm Carrier)
(H (dBc)
x W x D)
Maximum
Power (W)
Parameters
Weight,
Impedance
() w/o Mounting KiT
790-960
50 W
Dimensions, HxWxD (mm) / (in)

Connector
Type and
andColor
Location
Mechanical
Specifications
Radome Material
Parameters
Connector TypeTemperature
Operational
Dimensions,
HxWxD (mm) / (in)
Mounting
Mounting
Weight,
w/o Mounting Kit (kg) / (lb)
Shipping
Dimensions,
HxWxD (mm) / (in)
Radome
Material
Color
Shippingand
Dimensions
Shipping
Connector
Type Weight (kg) / (Ib)
Shipping
Weight
Mounting
Environmental
Class
Environmental
Shipping
Weight (kg) / (Ib) Class
Environmental Class
45
7.0
50 7510
Ohm
60
1.8:1
1710-2700
45
7.5
7010
55
7010
7510
55 60
1.8:1
2300-2700
2300-2700
20
<-140
7.5
50
7010
50
55
20
<-140
310 x 180 x 60 mm
(12.2 x 7.1 x 2.4 in)
50
0.7 kg 50
/ 1.5Specifications
lb
310x180x60 / 12.2x7.1x2.4
ABS, Light Grey 0.7 / 1.5
2 x N-female
ABS, Light Grey
Specifications
2 x N-Female
-10 to +60C
310x180x60 / 12.2x7.1x2.4
Wall Mounted
0.7 / 1.5 Wall mounted
360x200x80 / 14.2x7.9x3.1
ABS, Light Grey
360
x 200 x 80 mm (14.2 x 7.9
0.8x/ 3.1
1.8in)
2 x N-Female
Wall Mounted0.8 kg (1.8
360x200x80 / 14.2x7.9x3.1
Indoor
0.8 / 1.8
Indoor
lb) Indoor
CONNECTOR
POSITION
& installation
guide
Connector
Position
& Installation
Guide
698-960
698-960
698-960
1710-27001710-2700
1710-2700
N- F
112
N- F
N- F
698-960
1710-2700
N- F
P +46 8 752 02 20
www.leax.com
Revision A
RELIABILITY &
HIGH PERFORMANCE
LEAX Arkivator Telecom is a global technology company servicing the
coaxial and RF industry in both the broadcasting and telecom sectors.
Our focus is to develop and manufacture the most innovative,
dependable and long-lasting products on the market.
At LEAX Arkivator Telecom, our focus has long been on the development and
manufacture of innovative, long-lasting RF products offering superior reliability
and performance for the worldwide market. Today our position on the worldwide
market continues to grow stronger thanks to the extensive production knowledge and manufacturing capacity available to us as part of the LEAX Group.
At LEAX Arkivator Telecom we work together with major international operators,
system suppliers and cable manufacturers who have used our products ever
since the telecom boom. These companies trust the performance our products
deliver, and we are dedicated to maintaining their confidence while creating
new, high quality products. The single piece connector and our market leading
built-in weatherproofing system are examples of designs that save telecom
customers money while providing long-term system stability.
Leax Arkivator Telecom

Stridsvagnsvgen 14
291 39 Kristianstad, Sweden
PHONE: +46 8 752 02 20
INFO: siteequipment@arkivator.com
WEB: www.leax.com

Leax Arkivator Telecom Catalogue 2014

Uploaded by

Copyright:

Available Formats

Leax Arkivator Telecom Catalogue 2014

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Leax Arkivator Telecom Catalogue 2014

Uploaded by

Copyright:

Available Formats

CONNECTORS JUMPER CABLES

EMP & GROUNDING CABLE CLAMPS

FEEDER & JUMPER CABLES

EMP & GROUNDING

INFO & ORDER: siteequipment@arkivator.com

Ordering products from Leax Arkivator

Leax Arkivator Telecom

At LEAX Arkivator Telecom, our focus is on the development and manu-

Modern communication places great demands on the systems that pro-

facture of innovative, long-lasting RF products offering superior reli-

cess the information being exchanged throughout the world. It goes

ability and performance at a reasonable price for the worldwide market.

Previously Teracom Components, we became Exir Telecom in 2008

When developing new technology it is of the utmost importance to un-

new, our products continue to be built with experience and tradition

stretching back to the first RF infrastructures to be built in Sweden.

from this perspective that we view evolving technologies. We stay close

Today our position on the worldwide market continues to grow stronger

thanks to the extensive production knowledge and manufacturing ca-

with a clear understanding of the ultimate aim of the technology can we

pacity available to us as part of the Exir / Arkivator Group now owned

build the finest quality products available.

by the LEAX Group.

Trusted around the world

Where new ideas come first

At LEAX Arkivator Telecom we work together with major international

formance our products deliver, and we are dedicated to maintaining their

easy-to-use, single piece connector that we introduced back in 1998, an

innovation that revolutionized the market. By studying problems on-site

connector and our market leading built-in weatherproofing system are

together with installers, our experienced R&D engineers excel at develop-

examples of designs that save telecom customers money while provid-

ing products that simplify installation, improve performance and enhance

ing long-term system stability.

overall system reliability.

Leax Arkivator Telecom AB

Unbeatable quality and advantages

Unrivalled Industry knowledge with

Leax Arkivator Telecom AB P +46 8 752 02 20

Reliable Connector Design

SILVER-PLATED CONTACT SURFACES

All contact surfaces are silver-plated to achieve

HIGH CONTACT PRESSURE ON OUTER CONDUCTOR

VIBRATION RESISTANT CONSTRUCTION

cable. A specially designed slot keeps the outer

The double O-rings sealing the outer conductor

conductor of the cable in place.

provide added stability to protect against the

O-Ring Sealing for Guaranteed Water Protection

BETWEEN CONNECTORS FRONT AND BACK PIECES

connector and plastic cable jacket.

AROUND OUTER COPPER TUBE

INSIDE THE CONNECTOR HEAD

Leax Arkivator Telecom AB

SNOW AND ICE

DUST AND SAND STORMS

HUMIDITY AND HEAVY RAIN

SALT WATER AND STRONG WINDS

HOW WE STOP WATER FROM GETTING IN

sealing. Our products have built-in weather protection consisting of