Jpep 0 1360 T 4141 PDF

Dimensions
for
Piping Components
JPEP-0-1360-T-4141 Rev.0
Issue Date: 01 Apr 2002
This document is of a confidential nature and is the property of JGC CORPORATION, Tokyo, Japan, and shall not be
traced, photographed, photostated or reproduced in any manner, nor used for any purpose whatsoever except by written
permission of JGC CORPORATION.
Responsible Dep.: Piping Engineering Dep.:

Rev.
Date
01-APR-02
Description
First Issue
Prepared
Checked
Approved
S.Hayashi
A.Kitamura
Y.Makino
REFERENCE DATA
Page
JPEP-0-1360-T-4141
Dimensions for Piping Components
of
43
REV. 0
1. This standard is prepared for dimensions of parts and assemblies using parts shown in the overseas codes such as ANSI
and API, etc. according to JGS 220-320-1-02E Dimensional Requirements for Piping Assemblies.
2. The dimension of fitting + spool piece of pipe is principally is calculated with the wall thickness of Sch. 80 or smaller
for nominal size 20 in. NPS or smaller, and with 21 mm or smaller for nominal size 24 in. NPS or larger.
Therefore,
calculations shall be made separately where the wall thickness exceeds those given in this standard.
3. Root clearances in butt welding are generally by 3 mm, however, calculations in this standard are performed with the
clearance of 0 mm since the root clearance is contracted due to welding.
4. Dimensions in the case of using short radius elbows shall be calculated separately per each case since values in this
table are based on those of long radius elbows.
5. Dimensions for reducers of nominal sizes 50 in. NPS and large shall be as per the respective specifications.
6. assembled dimensions (H and J) of flanges and tees sizing from 1-1/2 in. NPS to 24 in. NPS are based on the values
where the dimension (M) of tee is of equal diameter.
Additionally, where reducing tees are to be used, calculation shall be made according to the dimension (M) and those of
(D) or (E) for the nominal size of the branch pipe.
for slip-on flanges, however, a surplus of 20 mm shall be added as
clearance for bolt taking out for nominal sizes 2-1/2 in. NPS and smaller.
7. Dimensions
(1) Dimensions in the table are of values counted fractions of 5 and over as a unit and cut away the rest of 2nd decimals
after converting the inch indications into millimeter.
(2) Face-to-face dimensions of valves are of values counted fractions of 5 and over as a unit and cut away the rest of
decimals.
REFERENCE DATA
Page
of
JPEP-0-1360-T-4141
43
REV. 0
PIPING (MIN.) DIMENSION 1/2

25.4
XXS
Sch. 40,80 20.8
22.4
Sch. 160
35.1
XXS
Sch. 40,80 25.4
28.7
Sch. 160
21.3
10.7
9.7
35.1
XXS
Sch. 40,80 25.4
28.7
Sch. 160
9.7
9.7
XXS, Sch. 160 35

Sch. 40,80
30
29.0
9.7
40.4
XXS
Sch. 40,80 31.1
33.7
Sch. 160
PIPE
45 ELBOW
90 ELBOW
Sch.
W. Thick
STD 40
2.8
XS 80
3.7
160
4.8
XXS
92.0
XXS
Sch. 40,80 82.3
85.6
Sch. 160
65
COUPLING
TEE
XXS, Sch. 160 120

Sch. 40,80
95
35
35
40
7.5
STUBEND
SWAGED NIPPLE
C
N
SHORT PIPE
1.6
SWAGED NIPPLEELBOW OR TEE
ELBOW-ELBOW
OR TEE
BOSS (SOCKET)
35
35
B
A
SW
10
40
40
SO-SHORT PIPE
SW
SO-SHORT PIPE(90 ELBOW OR TEE)
WN
WN-SHORT PIPE
(90 ELBOW OR TEE)
13.6
40
BOSS (THREAD)
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
2500
RJ
88.9
95.3
95.3
95.3
95.3
120.7
120.7
133.3
11.2
14.2
20.6
19.8
19.8
28.7
28.7
36.6
15.7
22.4
28.7
46
52
59
47.8
52.3
58.7
57.9
57.9
66.8
66.8
79.5
100
110
110
130
140
140
140
140
150
150
160
76.2
76.2
6.1
12.7
12.7
DIA. OF BOLTS
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
NO. OF BOLTS
RING NO.
R11
R11
R12
R12
R13
FLG CLEARANCE
COMPACT VALVE
API 602 (JPI CL.800)(REFERENCE)
GATE
GLOBE
100
100
161
89
CHECK
45
165
89
89
REFERENCE DATA
Page
of
JPEP-0-1360-T-4141
43
REV. 0
PIPING (MIN.) DIMENSION 3/4

41.1
XXS
Sch. 40,80 31.8
35.1
Sch. 160
26.7
13.4
31.8
XXS
Sch. 40,80 25.4
26.9
Sch. 160
12.7
41.1
XXS
Sch. 40,80 31.8
35.1
Sch. 160
12.7
12.7
XXS, Sch. 160 40

Sch. 40,80
30
35.1
12.7
46.6
XXS
Sch. 40,80 36.9
41.0
Sch. 160
PIPE
90 ELBOW
Sch.
W. Thick
STD 40
2.9
XS 80
3.9
160
5.6
XXS
45 ELBOW
TEE
110.0
XXS
Sch. 40,80 100.7
104.0
Sch. 160
80
COUPLING
XXS, Sch. 160 135

Sch. 40,80
105
Sch. 40,80 40
Sch. 160
42
45
7.8
STUBEND
SWAGED NIPPLE
C
N
SHORT PIPE
1.6
ELBOW-ELBOW
OR TEE
13
45
BOSS (SOCKET)
Sch. 40,80 40
Sch. 160
42
Sch. 40,80 40
Sch. 160
42
B
A
SW
Sch. 40,80 40
Sch. 160
42
SO-SHORT PIPE
SW
WN
WN-SHORT PIPE
(90 ELBOW OR TEE)
14.1
45
45
BOSS (THREAD)
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
2500
RJ
98.6
117.3
117.3
117.3
117.3
130.0
130.0
139.7
12.7
15.7
22.1
22.1
22.1
31.8
31.8
38.1
15.7
25.4
31.8
46
55
62
52.3
57.2
63.5
63.5
63.5
76.2
76.2
85.6
110
120
120
140
150
160
160
160
170
170
180
76.2
76.2
4.6
14.2
14.2
DIA. OF BOLTS
1/2
5/8
5/8
5/8
5/8
3/4
3/4
3/4
NO. OF BOLTS
RING NO.
R13
R13
R14
R14
R16
FLG CLEARANCE
COMPACT VALVE
GATE
GLOBE
100
100
161
92
CHECK
51
165
92
92
REFERENCE DATA
Page
of
JPEP-0-1360-T-4141
43
REV. 0
PIPING (MIN.) DIMENSION 1

44.5
XXS
Sch. 40,80 35.1
39.6
Sch. 160
33.4
16.7
33.3
XXS
Sch. 40,80 26.9
30.2
Sch. 160
12.7
44.5
XXS
Sch. 40,80 35.1
39.6
Sch. 160
12.7
12.7
XXS, Sch. 160 45

Sch. 40,80
30
38.1
12.7
56.5
XXS
Sch. 40,80 45.2
49.6
Sch. 160
PIPE
90 ELBOW
Sch.
W. Thick
STD 40
3.4
XS 80
4.6
160
6.4
XXS
45 ELBOW
TEE
118.4
XXS
Sch. 40,80 109.0
113.5
Sch. 160
85
COUPLING
XXS, Sch. 160 155

Sch. 40,80
115
Sch. 40,80 47
Sch. 160
52
50
9.1
STUBEND
SWAGED NIPPLE
C
N
SHORT PIPE
1.6
ELBOW-ELBOW
OR TEE
13
50
BOSS (SOCKET)
Sch. 40,80 47
Sch. 160
52
Sch. 40,80 47
Sch. 160
52
B
A
SW
Sch. 40,80 47
Sch. 160
52
SO-SHORT PIPE
SW
WN
WN-SHORT PIPE
(90 ELBOW OR TEE)
16.8
50
50
BOSS (THREAD)
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
2500
RJ
108.0
124.0
124.0
124.0
124.0
149.4
149.4
158.8
14.2
17.5
23.9
23.9
23.9
34.8
34.8
41.4
17.5
26.9
33.3
48
57
63
55.6
62.0
68.3
68.3
68.3
79.5
79.5
95.3
110
120
130
150
160
160
160
160
180
180
190
101.6
101.6
108.0
4.8
14.2
14.2
DIA. OF BOLTS
1/2
5/8
5/8
5/8
5/8
7/8
7/8
7/8
NO. OF BOLTS
RING NO.
R16
R16
R16
R16
R18
FLG CLEARANCE
COMPACT VALVE
GATE
GLOBE
125
125
210
114
CHECK
67
210
111
111
REFERENCE DATA
Page
of
JPEP-0-1360-T-4141
43
REV. 0
PIPING (MIN.) DIMENSION 1-1/2

50.8
XXS
Sch. 40,80 44.5
50.8
Sch. 160
48.3
24.2
38.1
XXS
Sch. 40,80 33.3
38.1
Sch. 160
12.7
50.8
XXS
Sch. 40,80 44.5
50.8
Sch. 160
12.7
12.7
XXS, Sch. 160 50

Sch. 40,80
30
38.1
12.7
74.0
XXS
Sch. 40,80 61.3
66.5
Sch. 160
PIPE
90 ELBOW
Sch.
W. Thick
STD 40
3.7
XS 80
5.1
160
7.1
XXS
45 ELBOW
110
TEE
149.7
XXS
Sch. 40,80 143.4
149.7
Sch. 160
COUPLING
XXS, Sch. 160 190

Sch. 40,80
140
STUBEND
SWAGED NIPPLE
1.6
C
N
Sch. 40,80 64
Sch. 160
68
Sch. 40,80 55
Sch. 160
60
10.2
ELBOW-ELBOW
OR TEE
Sch. 40,80 55
Sch. 160
60
Sch. 40,80 64
Sch. 160
68
13
Sch. 40,80 64
Sch. 160
68
B
A
SW
Sch. 40,80 64
Sch. 160
68
BOSS (SOCKET)
SHORT PIPE
Sch. 40,80 55
Sch. 160
60
SO-SHORT PIPE
WN
SW
WN-SHORT PIPE
(90 ELBOW OR TEE)
17.3
Sch. 40,80 55
Sch. 160
60
BOSS (THREAD)
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
2500
RJ
127.0
155.4
155.4
155.4
155.0
177.8
177.8
203.2
17.5
20.6
28.7
26.9
28.7
38.1
38.1
52.4
22.4
30.2
38.1
52
60
68
62.0
68.3
76.2
74.7
76.2
88.9
88.9
119.2
130
140
150
170
180
180
180
180
200
200
230
101.6
101.6
108.0
6.6
12.7
14.2
DIA. OF BOLTS
1/2
3/4
3/4
3/4
3/4
1-1/2
NO. OF BOLTS
RING NO.
R20
R20
R20
R20
R23
FLG CLEARANCE
COMPACT VALVE
GATE
GLOBE
160
160
250
127
CHECK
110
246
165
165
REFERENCE DATA
Page
of
JPEP-0-1360-T-4141
43
REV. 0

L 57.2
S 38.1
48.3
28.4
57.2
63.5
38.1
REDUCER
CAP
XXS, Sch. 160 50

Sch. 40,80
30
24.2
M
PIPE
90 ELBOW
110
Sch.
W. Thick
STD 40
45 ELBOW
TEE
TEE
114
121
SHORT PIPE
114
114
86
69
3.7
Nom.
Size
XS 80
5.1
1-1/2
57.2
160
7.1
57.2
45 ELBOW
102
3/4
57.2
40
1/2
57.2
XXS
90 ELBOW90 ELBOW
SWAGED NIPPLE
STUBEND
WN
SOSHORT PIPE90 ELBOW
121
97
57
90 ELBOW-REDUCER
61
REDUCER-TEE-TEE-90 ELBOW
55
55
SOSHORT PIPE
WN90 ELBOW
SOSHORT PIPEST TEE
WN-ST TEE
SOSHORT
PIPE
WNSHORT
BOSS
3/4 Max. PIPE
BOSS
3/4 Max.
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
2500
RJ
127.0
155.4
155.4
155.4
155.4
177.8
177.8
203.2
17.5
20.6
28.7
26.9
28.7
38.1
38.1
52.4
22.4
30.2
38.1
52
60
68
62.0
68.3
76.2
74.7
76.2
88.9
88.9
119.2
109
117
125
119
126
133
132
133
146
146
177
129
137
145
119
126
133
132
133
146
146
177
80
85
95
120
125
135
130
130
145
145
175
101.6
101.6
108.0
DIA. OF BOLTS
1/2
3/4
3/4
3/4
3/4
1-1/8
NO. OF BOLTS
RING NO.
R20
R20
R20
R20
R23
FLG CLEARANCE
GATE
165*
191
241
203
241
305
305
387
GLOBE
165*
229
241
241
241
305
305
387
CHECK
165*
Note : * CL.150 RF only.
241
241
254
241
305
305
387
REFERENCE DATA
Page
of
JPEP-0-1360-T-4141
43
REV. 0

L 76.2
S 50.8
60.3
35.1
63.5
76.2
38.1
REDUCER
CAP
XXS, Sch. 160 50

Sch. 40,80
30
30.2
M
PIPE
90 ELBOW
130
45 ELBOW
TEE
TEE
152
127
140
111
85
Sch.
W. Thick
STD 40
3.9
XS 80
5.5
63.5
160
8.7
1-1/2
60.5
45 ELBOW
11.1
50.8
50
3/4
44.5
XXS
Nom.
Size
140
SHORT PIPE
90 ELBOW90 ELBOW
SWAGED NIPPLE
STUBEND
WN
152
120
70
90 ELBOW-REDUCER
79
55
55
SOSHORT PIPE
WN90 ELBOW
SOSHORT PIPEST TEE
WN-ST TEE
SOSHORT
PIPE
BOSS
1 Max.
WNSHORT
PIPE
BOSS
1 Max.
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
2500
RJ
152.4
165.1
165.1
165.1
165.1
215.9
215.9
235.0
19.1
22.4
31.8
30.3
33.3
46.0
46.0
58.7
25.4
33.3
42.9
55
63
73
63.5
69.9
79.5
77.8
81.1
109.5
109.5
134.9
131
139
149
140
146
156
154
157
186
186
211
139
147
157
127
133
143
141
145
173
173
198
80
90
100
120
140
170
135
135
165
165
190
152.4
152.4
158.8
DIA. OF BOLTS
5/8
5/8
5/8
5/8
5/8
7/8
7/8
NO. OF BOLTS
RING NO.
R23
R23
R24
R24
R26
FLG CLEARANCE
GATE
178
216
292
232
295
371
371
454
GLOBE
203
267
292
283
295
371
371
454
CHECK
203
267
292
283
295
371
371
454
REFERENCE DATA
Page
of
JPEP-0-1360-T-4141
43
REV. 0

L 95.3
S 63.5
73.0
44.5
76.2
88.9
38.1
REDUCER
CAP
XXS, Sch. 160 60

Sch. 40,80
50
36.5
M
PIPE
90 ELBOW
45 ELBOW
W. Thick
STD 40
TEE
191
L
Sch.
TEE
165
SHORT PIPE
152
172
140
107
5.2
Nom.
Size
XS 80
7.0
2-1/2
76.2
160
9.5
69.9
45 ELBOW
14.0
1-1/2
66.5
63
57.2
XXS
90 ELBOW90 ELBOW
STUBEND
184
152
89
90 ELBOW-REDUCER
WN
99
75
75
SOSHORT PIPE
WN90 ELBOW
SOSHORT PIPEST TEE
WN-ST TEE
SOSHORT
PIPE
BOSS
1 Max.
WNSHORT
PIPE
BOSS
1 Max.
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
2500
RJ
177.8
190.5
190.5
190.5
190.5
244.3
244.3
266.7
22.4
25.4
34.8
33.3
36.4
49.1
49.1
66.7
28.4
38.1
47.5
79
88
97
69.9
76.2
85.6
84.1
87.2
112.6
112.6
152.3
175
184
193
165
172
181
179
183
208
208
248
155
164
173
146
152
162
160
163
189
189
229
105
115
125
145
155
160
160
165
190
190
230
152.4
152.4
158.8
DIA. OF BOLTS
5/8
3/4
3/4
3/4
3/4
1-1/8
NO. OF BOLTS
RING NO.
R26
R26
R27
R27
R28
FLG CLEARANCE
GATE
191
241
330
257
333
422
422
514
GLOBE
216
292
330
308
333
422
422
514
CHECK
216
292
330
308
333
422
422
514
REFERENCE DATA
Page
of
JPEP-0-1360-T-4141
43
REV. 0

L 114.3
S 76.2
88.9
50.8
85.9
88.9
50.8
REDUCER
CAP
XXS, Sch. 160 65

Sch. 40,80
50
44.5
M
PIPE
90 ELBOW
45 ELBOW
TEE
TEE
229
172
200
165
123
Sch.
W. Thick
STD 40
5.5
XS 80
7.6
85.9
160
11.1
2-1/2
82.6
45 ELBOW
15.2
76.2
72
1-1/2
73.2
XXS
Nom.
Size
175
SHORT PIPE
90 ELBOW90 ELBOW
STUBEND
203
173
102
90 ELBOW-REDUCER
WN
117
75
75
SOSHORT PIPE
WN90 ELBOW
SOSHORT PIPEST TEE
WN-ST TEE
SOSHORT
PIPE
BOSS
1 Max.
WNSHORT
PIPE
BOSS
1 Max.
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
2500
RJ
190.5
210.0
210.0
210.0
210.0
241.3
266.7
304.8
23.9
28.4
38.1
36.4
39.7
46.0
55.7
76.1
30.2
42.9
52.3
80
93
102
69.9
79.2
88.9
87.2
90.5
109.5
125.3
177.7
194
207
216
184
194
203
202
205
224
240
292
166
179
188
156
165
175
173
176
195
211
264
105
120
130
145
155
165
165
165
185
200
255
152.4
152.4
158.8
DIA. OF BOLTS
5/8
3/4
3/4
3/4
3/4
7/8
1-1/8
1-1/4
NO. OF BOLTS
RING NO.
R31
R31
R31
R35
R32
FLG CLEARANCE
GATE
203
283
356
298
359
384
473
584
GLOBE
241
318
356
333
359
384
473
584
CHECK
241
318
356
333
359
384
473
584
REFERENCE DATA
Page
10
of
JPEP-0-1360-T-4141
43
REV. 0

L 152.4
S 101.6
114.3
63.5
104.6
101.6
63.5
REDUCER
CAP
XXS, Sch. 160 75

Sch. 40,80
50
57.2
M
PIPE
90 ELBOW
45 ELBOW
TEE
TEE
305
209
257
216
153
Sch.
W. Thick
STD 40
6.0
XS 80
8.6
104.6
160
13.5
98.6
45 ELBOW
17.1
2-1/2
95.3
90
88.9
1-1/2
85.9
XXS
Nom.
Size
206
SHORT PIPE
90 ELBOW90 ELBOW
STUBEND
254
217
127
90 ELBOW-REDUCER
WN
153
75
75
SOSHORT PIPE
WN90 ELBOW
SOSHORT PIPEST TEE
WN-ST TEE
SOSHORT
PIPE
BOSS
1 Max.
WNSHORT
PIPE
BOSS
1 Max.
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
2500
RJ
228.6
254.0
273.1
254.0
273.1
292.1
311.2
355.6
23.9
31.8
44.5
39.7
46.0
52.4
61.8
87.3
33.3
47.8
60.2
83
98
110
76.2
85.7
108.0
93.8
109.5
122.2
131.9
201.6
235
250
262
229
238
260
246
262
275
284
354
188
203
215
181
190
213
198
214
227
237
306
110
125
135
155
160
185
170
185
200
210
280
152.4
152.4
160.3
DIA. OF BOLTS
5/8
3/4
7/8
3/4
7/8
1-1/8
1-1/4
1-1/2
NO. OF BOLTS
RING NO.
R37
R37
R37
R39
R38
FLG CLEARANCE
GATE
229
305
432
321
435
460
549
683
GLOBE
292
356
432
321
435
460
549
683
CHECK
292
356
432
321
435
460
549
683
REFERENCE DATA
Page
11
of
JPEP-0-1360-T-4141
43
REV. 0

L 190.5
S 127.0
141.3
79.2
124.0
127.0
76.2
REDUCER
CAP
XXS, Sch. 160 80

Sch. 40,80
50
70.65
M
PIPE
90 ELBOW
45 ELBOW
TEE
TEE
381
L
Sch.
W. Thick
STD 40
6.6
XS 80
9.5
124.0
160
15.9
117.3
19.1
111.3
2-1/2
108.0
104.6
XXS
Nom.
Size
251
90 ELBOW90 ELBOW
STUBEND
318
WN
248
315
270
191
270
45 ELBOW
112
158
90 ELBOW-REDUCER
SHORT PIPE
191
75
75
SOSHORT PIPE
WN90 ELBOW
SOSHORT PIPEST TEE
WN-ST TEE
SOSHORT
PIPE
BOSS
1 Max.
WNSHORT
PIPE
BOSS
1 Max.
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
2500
RJ
254.0
279.4
330.2
279.4
330.2
349.3
374.7
419.1
23.9
35.1
50.8
43.0
52.4
58.7
81.1
104.6
36.6
50.8
66.8
86
101
117
88.9
98.6
120.7
106.5
122.2
134.9
163.4
241.3
277
292
308
279
289
311
297
313
325
354
432
210
225
241
213
223
245
231
246
259
287
365
110
125
145
165
175
195
185
200
210
240
320
203.2
203.2
211.1
DIA. OF BOLTS
3/4
3/4
3/4
1-1/4
1-1/2
1-3/4
NO. OF BOLTS
RING NO.
R41
R41
R41
R44
R42
FLG CLEARANCE
GATE
254
381
508
397
511
562
676
806
GLOBE
356
(330)
400
508
416
511
562
676
806
508
416
511
562
676
806
CHECK
Note : Dimension in (
330
400
) is for CLASS 125 FF.
REFERENCE DATA
Page
12
of
JPEP-0-1360-T-4141
43
REV. 0

L 228.6
S 152.4
168.3
95.3
142.7
139.7
88.9
REDUCER
CAP
XXS, Sch. 160 95

Sch. 40,80
50
84.2
M
PIPE
90 ELBOW
45 ELBOW
TEE
TEE
457
L
Sch.
W. Thick
STD 40
7.1
XS 80
11.0
142.7
160
18.3
136.7
22.0
130.0
124.0
2-1/2
120.7
XXS
Nom.
Size
282
90 ELBOW90 ELBOW
STUBEND
368
WN
285
371
324
230
325
45 ELBOW
135
191
90 ELBOW-REDUCER
SHORT PIPE
229
75
75
SOSHORT PIPE
WN90 ELBOW
SOSHORT PIPEST TEE
WN-ST TEE
SOSHORT
PIPE
BOSS
1 Max.
WNSHORT
PIPE
BOSS
1 Max.
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
2500
RJ
279.4
317.5
355.6
317.5
355.6
381.0
393.7
482.6
25.4
36.6
54.1
44.5
55.7
63.6
92.1
120.7
39.6
52.3
72.9
90
102
123
88.9
98.6
123.7
106.5
125.3
147.6
181.0
285.8
319
331
352
318
327
352
335
354
376
410
514
233
245
266
232
241
266
249
268
290
324
429
115
130
150
165
175
200
185
200
225
255
360
203.2
203.2
211.1
DIA. OF BOLTS
3/4
3/4
3/4
1-1/8
1-3/8
NO. OF BOLTS
12
12
12
12
12
12
RING NO.
R45
R45
R45
R46
R47
FLG CLEARANCE
GATE
267
403
559
419
562
613
711
927
GLOBE
406
(356)
444
559
460
562
613
711
927
559
460
562
613
711
927
CHECK
Note : Dimension in (
356
444
) is for CLASS 125 FF.
REFERENCE DATA
Page
13
of
JPEP-0-1360-T-4141
43
REV. 0

L 304.8
S 203.2
219.1
127.0
177.8
152.4
101.6
REDUCER
CAP
XXS, Sch. 160 100

Sch. 40,80
55
109.6
M
PIPE
90 ELBOW
45 ELBOW
TEE
TEE
610
L
Sch.
W. Thick
STD 40
8.2
XS 80
12.7
177.8
XXS
22.2
168.1
23.0
162.1
155.4
160
Nom.
Size
330
90 ELBOW90 ELBOW
STUBEND
457
WN
356
483
432
307
434
45 ELBOW
180
254
90 ELBOW-REDUCER
SHORT PIPE
305
80
80
SOSHORT PIPE
WN90 ELBOW
SOSHORT PIPEST TEE
WN-ST TEE
SOSHORT
PIPE
BOSS
1 Max.
WNSHORT
PIPE
BOSS
1 Max.
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
2500
RJ
342.9
381.0
419.1
381.0
419.1
469.9
482.6
552.5
28.4
41.1
62.0
49.1
63.6
71.4
103.1
141.3
44.5
62.0
82.6
100
117
138
101.6
111.1
139.7
119.2
141.3
170.0
224.0
331.8
405
422
443
406
416
445
424
446
475
529
637
278
295
316
279
289
318
297
319
348
402
510
125
145
165
185
195
220
200
225
250
305
415
203.2
203.2
211.1
DIA. OF BOLTS
3/4
7/8
1-1/8
7/8
1-1/8
1-3/8
1-5/8
NO. OF BOLTS
12
12
12
12
12
12
12
RING NO.
R49
R49
R49
R50
R51
FLG CLEARANCE
GATE
292
419
660
435
664
740
841
1038
GLOBE
495
559
660
575
664
740
841
1038
CHECK
495
533
660
549
664
740
841
1038
REFERENCE DATA
Page
14
of
JPEP-0-1360-T-4141
43
REV. 0

L 381.0
S 254.0
273.1
158.8
215.9
177.8
127.0
REDUCER
CAP
XXS, Sch. 160 120

Sch. 40,80
65
136.6
M
PIPE
90 ELBOW
45 ELBOW
TEE
TEE
762
L
Sch.
W. Thick
STD 40
9.3
XS
12.7
10
215.9
15.1
203.2
25.4
193.6
190.5
184.2
80
XXS
160
Nom.
Size
394
90 ELBOW90 ELBOW
28.6
STUBEND
559
WN
432
597
540
383
542
45 ELBOW
225
318
90 ELBOW-REDUCER
SHORT PIPE
382
90
90
SOSHORT PIPE
WN90 ELBOW
SOSHORT PIPEST TEE
WN-ST TEE
SOSHORT
PIPE
BOSS
1 Max.
WNSHORT
PIPE
BOSS
1 Max.
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
2500
RJ
406.4
444.5
508.0
444.5
508.0
546.1
584.2
673.1
30.2
47.8
69.9
55.7
71.4
77.8
119.1
182.6
49.3
66.5
92.2
114
132
157
101.6
117.3
158.8
125.3
160.3
192.1
265.1
436.6
495
513
538
483
498
540
506
541
573
646
818
330
348
373
318
333
375
341
376
408
481
653
140
160
185
195
210
250
215
250
285
355
530
254.0
254.0
261.9
DIA. OF BOLTS
7/8
1-1/4
1-1/4
1-3/8
1-7/8
2-1/2
NO. OF BOLTS
12
16
16
16
16
16
12
12
RING NO.
R53
R53
R53
R54
R55
FLG CLEARANCE
GATE
330
457
787
473
791
841
1000
1292
GLOBE
622
622
787
638
791
841
1000
1292
CHECK
622
622
787
638
791
841
1000
1292
REFERENCE DATA
Page
15
of
JPEP-0-1360-T-4141
43
REV. 0

L 457.2
S 304.8
323.9
190.5
254.0
203.2
152.4
REDUCER
CAP
XXS, Sch. 160 140

Sch. 40,80
75
162.0
M
PIPE
90 ELBOW
45 ELBOW
TEE
914
L
Sch.
W. Thick
STD
TEE
Nom.
Size
9.5
457
12
254.0
12.7
10
241.3
80
17.5
228.6
XXS 120
25.4
218.9
160
33.3
215.9
XS
90 ELBOW90 ELBOW
STUBEND
660
WN
711
648
460
650
45 ELBOW
269
381
90 ELBOW-REDUCER
508
10.3
40
SHORT PIPE
458
100
100
SOSHORT PIPE
WN90 ELBOW
SOSHORT PIPEST TEE
WN-ST TEE
SOSHORT
PIPE
BOSS
1 Max.
WNSHORT
PIPE
BOSS
1 Max.
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
2500
RJ
482.6
520.7
558.8
520.7
558.8
609.6
673.1
762.0
31.8
50.8
72.9
58.7
74.5
87.2
138.2
201.6
55.6
73.2
98.3
131
148
173
114.3
130.0
161.8
138.0
163.3
208.1
296.7
481.0
588
605
630
572
587
619
595
621
665
754
938
385
402
427
368
384
416
392
417
462
551
735
155
175
200
215
230
265
240
265
310
400
585
254.0
254.0
261.9
DIA. OF BOLTS
7/8
1-1/8
1-1/4
1-1/8
1-1/4
1-3/8
2-3/4
NO. OF BOLTS
12
16
20
16
20
20
16
12
RING NO.
R57
R57
R57
R58
R60
FLG CLEARANCE
GATE
356
502
838
518
841
968
1146
1445
GLOBE
698
711
838
727
841
968
1146
1445
CHECK
698
711
838
727
841
968
1146
1445
REFERENCE DATA
Page
16
of
JPEP-0-1360-T-4141
43
REV. 0

L 533.4
S 355.6
355.6
222.3
279.4
330.2
165.1
REDUCER
CAP
Sch. 120,160 150

Sch. 40,80
80
177.8
M
PIPE
90 ELBOW
45 ELBOW
TEE
1067
L
Sch.
W. Thick
STD
TEE
Nom.
Size
9.5
610
14
279.4
12.7
12
269.7
80
19.1
10
257.0
120
27.8
247.7
160
35.7
238.3
XS
90 ELBOW90 ELBOW
STUBEND
864
WN
813
756
537
759
45 ELBOW
314
445
90 ELBOW-REDUCER
559
11.1
40
SHORT PIPE
534
105
105
SOSHORT PIPE
WN90 ELBOW
SOSHORT PIPEST TEE
WN-ST TEE
SOSHORT
PIPE
BOSS
1 Max.
WNSHORT
PIPE
BOSS
1 Max.
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
533.4
584.2
603.3
584.2
603.3
641.4
749.3
35.1
53.8
76.2
61.8
77.8
97.0
149.2
57.2
76.2
100.1
137
156
180
127.0
142.7
171.5
150.7
173.0
224.0
314.3
670
689
713
660
676
705
684
706
757
848
416
435
459
406
422
451
430
452
503
594
165
180
205
235
250
280
255
280
330
420
304.8
304.8
312.7
DIA. OF BOLTS
1-1/8
1-3/8
1-1/8
1-3/8
1-1/2
2-1/4
NO. OF BOLTS
12
20
20
20
20
20
16
RING NO.
R61
R61
R62
R63
FLG CLEARANCE
GATE
381
762
889
778
892
1038
1276
GLOBE
787
1038
1276
CHECK
787
838
889
854
892
1038
1276
2500
RJ
REFERENCE DATA
Page
17
of
JPEP-0-1360-T-4141
43
REV. 0

L 609.6
S 406.4
406.4
254.0
304.8
355.6
177.8
REDUCER
CAP
Sch. 120,160 165

Sch. 40,80
90
203.2
M
PIPE
90 ELBOW
45 ELBOW
TEE
TEE
1219
Nom.
Size
660
Sch.
W. Thick
STD 30
9.5
XS 40
12.7
16
304.8
80
21.4
14
304.8
120
31.0
12
295.1
160
40.5
10
282.4
273.1
263.7
90 ELBOW90 ELBOW
STUBEND
965
90 ELBOW-REDUCER
WN
SHORT PIPE
610
914
864
613
867
45 ELBOW
359
508
611
115
115
SOSHORT PIPE
WN90 ELBOW
SOSHORT PIPEST TEE
WN-ST TEE
SOSHORT
PIPE
BOSS
1 Max.
WNSHORT
PIPE
BOSS
1 Max.
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
596.9
647.7
685.8
647.7
685.8
704.9
825.5
36.6
57.2
82.6
65.1
84.1
100.0
163.5
63.5
82.6
112.8
154
173
203
127.0
146.1
184.2
154.0
185.7
227.0
328.6
764
783
813
737
756
794
764
795
837
938
459
478
508
432
451
489
459
491
532
633
180
200
230
245
260
300
270
300
345
445
304.8
304.8
312.7
DIA. OF BOLTS
1-1/4
1-1/2
1-1/4
1-1/2
1-5/8
2-1/2
NO. OF BOLTS
16
20
20
20
20
20
16
RING NO.
R65
R65
R66
R67
FLG CLEARANCE
GATE
406
838
991
854
994
1140
1407
GLOBE
914
CHECK
864
864
991
879
994
1140
1407
2500
RJ
REFERENCE DATA
Page
18
of
JPEP-0-1360-T-4141
43
REV. 0

L 685.8
S 457.2
457.0
285.8
342.9
381.0
203.2
REDUCER
CAP
Sch. 120,160 185

Sch. 40,80
100
228.5
M
PIPE
90 ELBOW
45 ELBOW
TEE
1372
L
Sch.
W. Thick
STD
TEE
Nom.
Size
9.5
724
18
342.9
12.7
16
330.2
40
14.3
14
330.2
80
23.8
12
320.5
120
34.9
10
307.8
160
45.2
298.5
XS
90 ELBOW90 ELBOW
STUBEND
1067
90 ELBOW-REDUCER
WN
686
1029
972
690
976
11.1
30
SHORT PIPE
45 ELBOW
404
572
687
125
125
SOSHORT PIPE
WN90 ELBOW
SOSHORT PIPEST TEE
WN-ST TEE
SOSHORT
PIPE
BOSS
1 Max.
WNSHORT
PIPE
BOSS
1 Max.
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
635.0
711.2
743.0
711.2
743.0
787.4
914.4
39.6
60.5
88.9
68.4
90.5
114.3
179.5
68.3
88.9
123.7
168
189
224
139.7
158.8
190.5
166.7
192.1
241.3
344.6
854
875
910
826
845
876
853
878
927
1030
511
532
567
483
502
533
510
535
584
688
195
215
250
265
285
315
295
320
370
470
304.8
304.8
312.7
DIA. OF BOLTS
1-1/8
1-1/4
1-5/8
1-1/4
1-5/8
1-7/8
2-3/4
NO. OF BOLTS
16
24
20
24
20
20
16
RING NO.
R69
R69
R70
R71
FLG CLEARANCE
432
914
1092
930
1095
1232
1559
GATE
GLOBE
CHECK
978
978
1092
994
1095
1232
1559
2500
RJ
REFERENCE DATA
Page
19
of
JPEP-0-1360-T-4141
43
REV. 0

L 762.0
S 508.0
508.0
317.5
381.0
508.0
228.6
REDUCER
CAP
Sch. 120,160 205

Sch. 40,80
110
254.0
M
PIPE
90 ELBOW
45 ELBOW
TEE
1524
L
Sch.
TEE
W. Thick
Nom.
Size
889
9.5
XS 30
12.7
20
381.0
40
15.1
18
368.0
80
26.2
16
355.6
120
38.1
14
355.6
160
50.0
12
345.9
10
333.2
323.9
STUBEND
1270
90 ELBOW-REDUCER
WN
762
1143
1080
767
1084
STD
90 ELBOW90 ELBOW
SHORT PIPE
45 ELBOW
449
635
763
135
135
SOSHORT PIPE
WN90 ELBOW
SOSHORT PIPEST TEE
WN-ST TEE
SOSHORT
PIPE
BOSS
1 Max.
WNSHORT
PIPE
BOSS
1 Max.
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
698.5
774.7
812.8
774.7
812.8
857.3
984.3
42.9
63.5
95.3
73.0
98.4
120.7
195.3
73.2
95.3
133.4
183
205
243
144.5
162.8
196.9
171.6
200.0
260.4
373.1
945
967
1005
907
925
959
934
962
1022
1135
564
586
624
526
544
578
553
581
641
754
210
230
270
280
300
335
310
335
395
510
304.8
304.8
314.3
DIA. OF BOLTS
1-1/8
1-1/4
1-5/8
1-1/4
1-5/8
NO. OF BOLTS
20
24
24
24
24
20
16
RING NO.
R73
R73
R74
R75
FLG CLEARANCE
10
457
991
1194
1010
1200
1334
1686
GATE
GLOBE
CHECK
978
1016
1194
1035
1200
1334
1686
2500
RJ
REFERENCE DATA
Page
20
of
JPEP-0-1360-T-4141
43
REV. 0

L 914.4
S 609.6
610.0
381.0
431.8
508.0
266.7
REDUCER
CAP
90
305.0
M
PIPE
90 ELBOW
45 ELBOW
TEE
TEE
1829
Nom.
Size
90 ELBOW90 ELBOW
STUBEND
1422
90 ELBOW-REDUCER
WN
940
SHORT PIPE
864
1346
1295
920
1301
24
431.8
20
431.8
18
419.1
16
406.4
14
406.4
12
396.7
10
384.0
45 ELBOW
539
762
916
115
115
SOSHORT PIPE
WN90 ELBOW
SOSHORT PIPEST TEE
WN-ST TEE
SOSHORT
PIPE
BOSS
1 Max.
WNSHORT
PIPE
BOSS
1 Max.
(UNIT : mm)
RATING
ANSI CLASS
125
FF
MARK
150
RF
300
RF
600
RF
300
RJ
600
RJ
900
RJ
1500
RJ
812.8
914.4
939.8
914.4
939.8
1041.4
1168.4
47.8
69.9
108.0
81.0
112.7
155.6
223.8
82.6
106.4
146.1
173
196
236
152.4
168.1
209.6
179.3
214.3
308.0
427.0
1087
1110
1150
1067
1083
1124
1094
1129
1222
1341
605
628
668
584
600
641
611
646
740
859
200
220
265
270
285
325
295
330
425
545
304.8
304.8
315.9
DIA. OF BOLTS
1-1/4
1-1/2
1-7/8
1-1/2
1-7/8
2-1/2
3-1/2
NO. OF BOLTS
20
24
24
24
24
20
16
RING NO.
R77
R77
R78
R79
FLG CLEARANCE
11
508
1143
1397
1165
1407
1568
1972
GATE
GLOBE
CHECK
1295
1346
1397
1368
1407
1568
1972
2500
RJ
REFERENCE DATA
Page
21
of
JPEP-0-1360-T-4141
43
REV. 0

L 990.6
S 660.4
660.0
406.4
495.3
609.6
266.7
REDUCER
CAP
90
330.0
M
PIPE
90 ELBOW
45 ELBOW
TEE
SHORT PIPE
TEE
Nom.
Size
1981
1981
90 ELBOW-90 ELBOW
1388
26
495.3
24
482.6
20
457.2
18
444.5
16
431.8
14
431.8
12
431.8
1394
575
988
1397
813
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
SO-SHORT PIPE90 ELBOW
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
250 lb FF
300 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
FF
838.2
800.1
SO
SO
WN
SO
WN
SO
WN
SO
WN
870.0
870.0
800.1
971.6
831.9
57.2
44.5
85.7
69.9
120.7
114.3
147
135
180
160
211
204
76.2
127
85.7
147.6
127.0
31.8
25.4
50.8
34.9
71.4
63.5
1138
1125
1166
1151
1201
1195
1067
1118
1076
1138
1118
DIA. OF BOLTS
7/8
1-1/4
1-1/4
3/4
1-3/4
NO. OF BOLTS
32
24
24
28
28
28
RATING
SYMBOL
A
API
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 900
CL. 150
CL. 300
CL. 600
CL. 900
762.0
785.9
866.6
889.0
1022.4
870.0
971.6
1016.0
1085.9
228.6
(235.0)
292.1
(303.2)
58.7
88.9
144.5
187.2
265.2
120.7
184.2
(196.9)
33.3
41.1
88.9
117.6
141.2
68.3
79.2
(91.9)
114.3
(120.7)
146.1
(157.2)
1049
1080
1135
1178
1256
1111
1175
(1188)
1219
(1226)
1283
(1294)
DIA. OF BOLTS
5/8
3/4
1-1/4
1-5/8
2-1/2
1-1/4
1-5/8
1-7/8
2-3/4
NO. OF BOLTS
36
36
32
28
20
24
28
28
20
) are for RTJ flanges.
R93
R93
R100
RING NO.
1
Note ( ) : Dimensions in (
REFERENCE DATA
Page
22
of
JPEP-0-1360-T-4141
43
REV. 0

L 1066.8
S 711.2
711.0
438.2
520.7
609.6
266.7
REDUCER
CAP
90
355.5
M
PIPE
90 ELBOW
45 ELBOW
TEE
SHORT PIPE
TEE
Nom.
Size
2134
2134
90 ELBOW-90 ELBOW
1496
28
520.7
26
520.7
24
508.0
20
482.6
18
469.9
16
457.2
14
457.2
12
447.5
1502
620
1064
1505
876
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
250 lb FF
300 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
FF
889.0
850.9
SO
SO
WN
SO
WN
SO
WN
SO
WN
927.1
927.1
850.9
1035.1
882.7
57.2
44.5
87.3
69.9
127.0
114.3
147
135
177
160
217
204
76.2
128.6
85.7
150.8
127.0
31.8
25.4
52.4
34.9
74.6
63.5
1214
1201
1244
1227
1284
1271
1143
1195
1153
1218
1194
DIA. OF BOLTS
7/8
1-1/4
1-1/4
3/4
1-3/4
NO. OF BOLTS
36
28
28
28
28
28
RATING
SYMBOL
A
API
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 900
CL. 150
CL. 300
CL. 600
CL. 900
814.1
836.7
920.8
952.5
1104.9
927.1
1035.1
1073.2
1168.4
241.3
(247.7)
304.8
(315.9)
62.0
95.3
149.4
196.9
282.7
125.5
196.9
(209.6)
33.3
44.5
88.9
122.2
153.9
71.4
85.9
(98.6)
117.6
(124.0)
149.1
(160.2)
1129
1162
1216
1263
1350
1192
1264
1308
(1315)
1372
(1383)
DIA. OF BOLTS
5/8
3/4
1-1/4
1-3/4
2-3/4
1-1/4
1-5/8
NO. OF BOLTS
40
40
36
28
20
28
28
28
20
R94
R94
R101
RING NO.
1
REFERENCE DATA
Page
23
of
JPEP-0-1360-T-4141
43
REV. 0

L 1143.0
S 762.0
762.0
469.9
558.8
609.6
266.7
REDUCER
CAP
90
381.0
M
PIPE
90 ELBOW
45 ELBOW
TEE
SHORT PIPE
TEE
Nom.
Size
2286
30
28
26
24
20
18
16
14
12
10
2286
90 ELBOW-90 ELBOW
1604
558.8
546.1
546.1
533.4
508.0
495.3
482.6
482.6
472.9
460.2
1610
665
1140
1613
940
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
250 lb FF
300 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
FF
939.8
901.7
SO
SO
WN
SO
WN
SO
WN
SO
WN
984.3
984.3
908.1
1092.2
939.8
57.2
44.5
88.9
69.9
127.0
120.7
147
135
179
160
217
211
76.2
130.2
92.1
152.4
133.4
31.8
25.4
54.0
34.9
76.2
66.7
1290
1278
1322
1303
1360
1354
1219
1273
1235
1295
1276
DIA. OF BOLTS
7/8
1-1/4
1-1/4
3/4
1-3/4
NO. OF BOLTS
36
28
28
36
28
32
RATING
SYMBOL
A
API
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 900
CL. 150
CL. 300
CL. 600
CL. 900
863.6
887.5
990.6
1022.4
1181.1
984.3
1092.2
1130.3
1231.9
254.0
(260.4)
317.5
(328.6)
65.0
100.1
158.0
211.1
295.4
136.7
209.6
(222.3)
33.3
44.5
93.7
131.8
161.8
74.7
91.9
(104.6)
120.7
(127.0)
155.7
(166.8)
1208
1243
1301
1354
1438
1280
1353
(1365)
1397
(1403)
1461
(1472)
DIA. OF BOLTS
5/8
3/4
1-3/8
1-7/8
1-1/4
1-3/4
NO. OF BOLTS
44
44
36
28
20
28
28
28
20
R95
R95
R102
RING NO.
1
REFERENCE DATA
Page
24
of
JPEP-0-1360-T-4141
43
REV. 0

L 1219.2
S 812.8
812.8
501.7
596.9
609.6
266.7
REDUCER
CAP
90
406.4
M
PIPE
90 ELBOW
45 ELBOW
TEE
SHORT PIPE
TEE
Nom.
Size
2438
32
30
28
26
24
20
18
16
14
2438
90 ELBOW-90 ELBOW
1713
596.9
584.2
571.5
571.5
558.8
533.4
520.7
508.0
508.0
1719
710
1217
1003
1721
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
250 lb FF
300 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
FF
1003.3
971.6
SO
SO
WN
SO
WN
SO
WN
SO
WN
1060.5
1060.5
958.9
1149.4
990.6
63.5
44.5
92.1
69.9
130.2
127.0
154
135
182
160
220
217
82.6
133.4
92.1
155.6
139.7
31.8
28.6
57.2
34.9
79.4
69.9
1373
1354
1401
1379
1439
1436
1302
1353
1311
1375
1359
1-1/2
1-1/2
3/4
1-3/4
28
28
36
28
36
DIA. OF BOLTS
NO. OF BOLTS
40
36
RATING
SYMBOL
A
API
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 900
CL. 150
CL. 300
CL. 600
CL. 900
914.4
941.3
1054.1
1085.9
1238.3
1060.5
1149.4
1193.8
1314.5
266.7
(274.6)
336.6
(347.7)
69.9
108.0
168.1
222.3
309.6
144.5
222.3
(236.5)
35.1
46.0
103.1
136.4
166.6
80.8
98.6
(112.8)
123.7
(131.6)
165.1
(176.2)
1289
1327
1387
1442
1529
1364
1442
(1456)
1486
(1494)
1556
(1567)
DIA. OF BOLTS
5/8
3/4
1-1/2
12
1-1/2
1-7/8
2-1/4
3-1/4
NO. OF BOLTS
48
48
32
28
20
28
28
28
20
R96
R96
R103
RING NO.
1
REFERENCE DATA
Page
25
of
JPEP-0-1360-T-4141
43
REV. 0

L 1295.4
S 863.6
863.6
533.4
635
609.6
266.7
REDUCER
CAP
90
431.8
M
PIPE
90 ELBOW
45 ELBOW
TEE
SHORT PIPE
TEE
Nom.
Size
2591
34
32
30
28
26
24
20
18
16
2591
90 ELBOW-90 ELBOW
1821
635.0
622.3
609.6
596.9
596.9
584.2
558.8
546.1
533.4
1827
754
1293
1067
1829
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
250 lb FF
300 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
FF
1054.1
1022.4
SO
SO
WN
SO
WN
SO
WN
SO
WN
1111.3
1111.3
1022.4
1206.5
1041.4
63.5
44.5
93.7
85.7
133.4
130.2
154
135
184
180
223
220
82.6
134.9
95.3
158.8
146.1
31.8
28.6
58.7
82.6
73.0
1449
1430
1479
1471
1519
1516
1378
1430
1391
1454
1442
DIA. OF BOLTS
1-1/2
1-1/2
7/8
1-3/4
NO. OF BOLTS
40
32
32
36
28
40
RATING
SYMBOL
A
44.5
38.1
API
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 900
CL. 150
CL. 300
CL. 600
CL. 900
965.2
1004.8
1107.9
1162.1
1314.5
1111.3
1206.5
1244.6
1397.0
276.1
(284.0)
355.6
(369.9)
73.2
110.2
173.0
239.8
325.4
149.4
231.6
(245.9)
35.1
49.3
103.1
147.6
177.8
82.6
101.6
(115.9)
127.0
(134.9)
171.5
(185.7)
1369
1406
1468
1535.2
1621
1445
1527
(1541)
1572
(1579)
1651
(1665)
DIA. OF BOLTS
5/8
7/8
1-1/2
2-1/4
3-1/4
1-1/2
1-7/8
2-1/4
3-1/2
NO. OF BOLTS
52
40
36
24
20
32
28
28
20
R97
R97
R104
RING NO.
1
REFERENCE DATA
Page
26
of
JPEP-0-1360-T-4141
43
REV. 0

L 1371.6
S 914.4
914.4
565.2
673.1
609.6
266.7
REDUCER
CAP
90
457.2
M
PIPE
90 ELBOW
45 ELBOW
TEE
SHORT PIPE
TEE
Nom.
Size
2743
36
34
32
30
28
26
24
20
18
16
2743
90 ELBOW-90 ELBOW
1930
673.1
660.4
647.7
635.0
622.3
622.3
609.6
584.2
571.5
558.8
1935
799
1370
1130
1937
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
250 lb FF
300 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
FF
1104.9
1073.2
SO
SO
WN
SO
WN
SO
WN
SO
WN
1168.4
1168.4
1073.2
1270.0
1111.3
63.5
44.5
95.3
85.7
136.5
142.9
154
135
185
176
227
233
82.6
136.5
95.3
161.9
155.6
31.8
28.6
60.3
85.7
79.4
1525
1506
1557
1547
1598
1605
1453
1508
1467
1534
1527
1-1/2
1-1/2
7/8
1-1/8
32
32
36
32
40
DIA. OF BOLTS
NO. OF BOLTS
44
40
RATING
SYMBOL
A
44.5
38.1
API
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 900
CL. 150
CL. 300
CL. 600
CL. 900
1033.5
1057.1
1171.4
1212.9
1346.2
1168.4
1270.0
1314.5
1460.5
288.8
(296.7)
368.3
(382.6)
85.9
117.3
180.8
249.2
331.7
157.2
241.3
(255.6)
36.6
52.3
103.1
152.4
179.3
90.4
104.6
(118.9)
130.3
(138.2)
177.8
(192.1)
1458
1489
1552
1621
1703
1529
1613
(1627)
1660
(1668)
1740
(1754)
DIA. OF BOLTS
3/4
7/8
1-5/8
2-1/4
1-1/2
2-1/4
3-1/2
NO. OF BOLTS
40
44
32
28
24
32
32
28
20
R98
R98
R105
RING NO.
1
REFERENCE DATA
Page
27
of
JPEP-0-1360-T-4141
43
REV. 0

L 1447.8
S 965.2
965.2
599.9
711.2
609.6
304.8
REDUCER
CAP
90
482.6
M
PIPE
90 ELBOW
45 ELBOW
TEE
SHORT PIPE
TEE
Nom.
Size
2896
38
36
34
32
30
28
26
24
20
18
2896
90 ELBOW-90 ELBOW
2048
711.2
711.2
698.5
685.8
673.1
647.7
647.7
635.0
609.6
596.9
2048
848
1448
1200
2048
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
250 lb FF
300 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
FF
SO
SO
WN
SO
WN
SO
WN
SO
WN
1238.3
1238.3
1124.0
1327.2
1162.1
44.5
95.3
95.3
139.7
142.9
135
185
185
230
233
136.5
104.8
163.5
155.6
28.6
60.3
87.3
79.4
1582
1633
1633
1678
1681
1584
1553
1611
1603
DIA. OF BOLTS
1-1/2
1-1/2
7/8
1-1/8
NO. OF BOLTS
32
32
36
32
40
RATING
SYMBOL
50.8
44.5
API
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 900
CL. 150
CL. 300
CL. 600
CL. 900
1084.3
1124.0
1222.2
1270.0
1460.5
1238.3
1168.4
1270.0
1460.5
88.9
124.0
192.0
260.4
358.8
157.2
180.8
260.4
358.9
38.1
53.8
111.3
158.8
196.9
87.4
108.0
158.8
196.9
1537
1572
1640
1708
1807
1605
1629
1708
1807
DIA. OF BOLTS
3/4
1-5/8
2-1/4
3-1/2
1-1/2
1-1/2
2-1/4
3-1/2
NO. OF BOLTS
40
40
36
28
20
32
32
28
20
RING NO.
REFERENCE DATA
Page
28
of
JPEP-0-1360-T-4141
43
REV. 0

L 1524.0
S 1016.0
1016
632
749.3
609.6
304.8
REDUCER
CAP
90
508
M
PIPE
90 ELBOW
45 ELBOW
TEE
SHORT PIPE
TEE
Nom.
Size
3048
40
38
36
34
32
30
28
26
24
20
18
3048
90 ELBOW-90 ELBOW
2158
749.3
749.3
736.6
723.9
711.2
698.5
673.1
673.1
660.4
635.0
622.3
2157
894
1525
1264
2156
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
250 lb FF
300 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
FF
SO
SO
WN
SO
WN
SO
WN
SO
WN
1289.1
1289.1
1174.8
1384.3
1212.9
44.5
98.4
101.6
139.7
149.2
135
188
192
230
239
139.7
104.8
166.7
158.8
28.6
63.5
90.5
82.6
1659
1712
1716
1754
1763
1664
1629
1691
1683
DIA. OF BOLTS
1-1/2
1-1/2
7/8
1-1/8
NO. OF BOLTS
36
36
40
36
44
RATING
SYMBOL
50.8
44.5
API
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 900
CL. 150
CL. 300
CL. 600
CL. 900
1135.1
1174.8
1273.0
1320.8
1511.3
1289.1
1238.3
1320.8
1511.3
91.9
128.5
198.4
270.0
369.8
163.6
193.5
270.0
369.8
38.1
55.6
115.8
165.1
203.2
90.4
114.3
165.1
203.2
1616
1653
1722
1794
1894
1688
1718
1794
1894
DIA. OF BOLTS
3/4
1-5/8
2-1/4
3-1/2
1-1/2
1-5/8
2-1/4
3-1/2
NO. OF BOLTS
44
44
40
32
24
36
32
32
24
RING NO.
REFERENCE DATA
Page
29
of
JPEP-0-1360-T-4141
43
REV. 0

L 1600.2
S 1066.8
1066.8
660.4
762
609.6
304.8
REDUCER
CAP
90
533.4
M
PIPE
90 ELBOW
45 ELBOW
TEE
SHORT PIPE
TEE
Nom.
Size
42
40
38
36
34
32
30
28
26
24
20
18
16
3200
3200
90 ELBOW-90 ELBOW
M
2255
711.2
711.2
711.2
711.2
711.2
711.2
711.2
698.5
698.5
660.4
660.4
647.7
635.0
2259
934
1598
1321
2261
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
250 lb FF
300 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
FF
1270.0
1244.6
SO
SO
WN
SO
WN
SO
WN
SO
WN
1346.2
1346.2
1244.6
1447.8
1270.0
69.9
44.5
101.6
111.1
142.9
155.6
160
135
192
201
233
246
88.9
142.9
114.3
176.2
165.1
31.8
31.8
66.7
93.7
88.9
1760
1735
1792
1801
1833
1846
1689
1743
1715
1776
1765
DIA. OF BOLTS
1-1/8
1-1/2
1-1/2
1-1/8
NO. OF BOLTS
48
36
36
40
36
48
RATING
SYMBOL
60.3
50.8
API
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 900
CL. 150
CL. 300
CL. 600
CL. 900
1185.9
1225.6
1333.5
1403.4
1562.1
1346.2
1289.1
1403.4
1562.1
95.3
133.4
204.7
285.8
377.7
171.5
200.2
285.8
377.7
39.6
58.7
119.1
174.5
212.6
96.8
119.1
174.5
212.6
1696
1734
1805
1886
1978
1772
1800
1886
1978
DIA. OF BOLTS
3/4
1-3/4
2-1/2
3-1/2
1-1/2
1-5/8
2-1/2
3-1/2
NO. OF BOLTS
48
48
36
28
24
36
32
28
24
RING NO.
REFERENCE DATA
Page
30
of
JPEP-0-1360-T-4141
43
REV. 0

L 1676.4
S 1117.6
1117.6
695.5
812.8
609.6
342.9
REDUCER
CAP
90
558.8
M
PIPE
90 ELBOW
45 ELBOW
TEE
SHORT PIPE
TEE
Nom.
Size
44
42
40
38
36
34
32
30
28
26
24
20
3353
3353
90 ELBOW-90 ELBOW
M
2375
762.0
762.0
749.3
736.6
723.9
723.9
711.2
711.2
698.5
698.5
698.5
685.8
2373
984
1677
1391
2372
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
250 lb FF
300 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
FF
SO
SO
WN
SO
WN
SO
WN
SO
WN
1403.4
1403.4
1295.4
1505.0
1339.9
57.2
101.6
111.1
146.1
171.5
147
192
201
236
262
142.9
114.3
177.8
171.5
31.8
66.7
95.3
95.3
1824
1868
1878
1913
1938
1819
1791
1854
1848
DIA. OF BOLTS
1-1/2
1-1/2
1-1/4
NO. OF BOLTS
40
40
40
36
44
RATING
SYMBOL
60.3
50.8
API
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 900
CL. 150
CL. 300
CL. 600
CL. 900
1251.0
1276.4
1384.3
1454.2
1648.0
1403.4
1352.6
1454.2
1648.0
104.6
136.7
214.4
295.4
397.0
177.8
206.2
295.4
397.0
42.9
60.5
127.0
179.3
220.7
101.6
124.0
179.3
220.7
1781
1813
1891
1972
2073
1854
1883
1972
2073
DIA. OF BOLTS
7/8
1-3/4
2-1/2
3-3/4
1-1/2
1-3/4
2-1/2
3-3/4
NO. OF BOLTS
36
52
40
32
24
40
32
32
24
RING NO.
REFERENCE DATA
Page
31
of
JPEP-0-1360-T-4141
43
REV. 0

L 1752.6
S 1168.4
1168.4
726.9
850.9
711.2
342.9
REDUCER
CAP
90
584.2
M
PIPE
90 ELBOW
45 ELBOW
TEE
SHORT PIPE
TEE
Nom.
Size
46
44
42
40
38
36
34
32
30
28
26
24
3505
3505
90 ELBOW-90 ELBOW
M
2482
800.1
800.1
787.4
774.7
762.0
762.0
749.3
749.3
736.6
736.6
736.6
723.9
2480
1028
1753
1454
2480
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
250 lb FF
300 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
FF
SO
SO
WN
SO
WN
SO
WN
SO
WN
1454.2
1454.2
1346.2
1562.1
1390.7
57.2
103.2
117.5
149.2
184.2
147
193
208
239
274
144.5
114.3
181.0
184.2
31.8
68.3
98.4
108.0
1900
1946
1960
1992
2027
1897
1867
1934
1937
DIA. OF BOLTS
1-1/2
1-1/2
1-1/4
NO. OF BOLTS
40
40
40
40
48
RATING
SYMBOL
60.3
50.8
API
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 900
CL. 150
CL. 300
CL. 600
CL. 900
1301.8
1341.4
1460.5
1511.3
1733.6
1454.2
1416.1
1513.8
1733.6
108
144.5
222.3
306.3
417.6
185.7
215.9
306.3
417.3
44.5
62.0
128.5
185.7
231.9
103.1
128.5
185.7
231.9
1861
1897
1975
2059
2170
1938
1969
2059
2170
DIA. OF BOLTS
7/8
1-1/8
1-7/8
2-1/2
1-1/2
1-7/8
2-1/2
NO. OF BOLTS
40
40
36
32
24
40
28
32
24
RING NO.
REFERENCE DATA
Page
32
of
JPEP-0-1360-T-4141
43
REV. 0

L 1828.8
S 1219.2
1219.2
759.0
889
711.2
342.9
REDUCER
CAP
90
609.6
M
PIPE
90 ELBOW
45 ELBOW
TEE
SHORT PIPE
TEE
Nom.
Size
48
46
44
42
40
38
36
34
32
30
28
26
24
3658
3658
90 ELBOW-90 ELBOW
M
2592
838.2
838.2
838.2
812.8
812.8
812.8
787.4
787.4
787.4
762.0
762.0
762.0
736.6
2589
1073
1830
1518
2588
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
300 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
FF
1422.4
1397.0
SO
SO
WN
SO
WN
SO
WN
SO
WN
1511.3
1511.3
1397.0
1651.0
1441.5
73.0
63.5
104.8
123.8
152.4
184.2
163
154
195
214
242
274
95.3
146.1
123.8
184.2
184.2
31.8
34.9
69.9
101.6
108.0
1992
1982
2024
2043
2071
2103
1924
1975
1953
2013
2013
1-1/8
1-1/2
1-1/2
1-1/4
44
44
44
40
48
DIA. OF BOLTS
NO. OF BOLTS
56
52
RATING
SYMBOL
66.7
57.2
API
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 900
CL. 150
CL. 300
CL. 600
CL. 900
1352.6
1392.2
1511.3
1593.9
1784.4
1511.3
1466.9
1593.9
1784.4
111.3
149.4
223.8
322.3
425.5
192.0
223.8
322.3
425.5
46.0
65.0
128.5
195.3
239.8
108.0
133.4
195.3
239.8
1940
1978
2053
2151
2254
2021
2053
2151
2254
DIA. OF BOLTS
7/8
1-1/8
1-7/8
2-3/4
1-1/2
1-7/8
2-3/4
NO. OF BOLTS
44
44
40
32
24
44
32
32
24
RING NO.
REFERENCE DATA
Page
33
of
JPEP-0-1360-T-4141
43
REV. 0

L 1905
S 1270
1270
789.1
90
635
PIPE
90 ELBOW
45 ELBOW
3810
REDUCER
SHORT PIPE
2694
2694
1116
3810
1905
90 ELBOW-90 ELBOW
1578
2694
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
FF
SO
SO
WN
SO
WN
SO
WN
SO
WN
1568.5
1568.5
1477.8
63.5
104.8
123.8
154
195
214
146.1
123.8
34.9
69.9
2059
2100
2119
2051
2029
DIA. OF BOLTS
1-3/4
1-3/4
NO. OF BOLTS
44
44
44
RATING
SYMBOL
66.7
57.2
API
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 150
CL. 300
CL. 600
1403.4
1443.0
1562.1
1670.1
1568.5
1530.4
1670.1
115.8
153.9
235.0
335.0
203.2
231.6
335.0
47.8
68.3
138.2
203.2
111.3
139.7
203.2
2021
2059
2140
2240
2108
2137
2240
DIA. OF BOLTS
7/8
1-1/8
1-7/8
1-3/4
NO. OF BOLTS
44
48
44
28
44
32
28
RING NO.
REFERENCE DATA
Page
34
of
JPEP-0-1360-T-4141
43
REV. 0

1982
L 1981.2
S 1320.8
1321.0
90
820.6
660.5
PIPE
90 ELBOW
REDUCER
45 ELBOW
3962
SHORT PIPE
2802
2802
1161
3962
1981
90 ELBOW-90 ELBOW
1641
2802
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
FF
SO
SO
WN
SO
WN
SO
WN
WN
1625.6
1625.6
1511.3
1562.1
63.5
108.0
136.5
154
198
227
149.2
136.5
190.5
34.9
73.0
108.0
2135
2179
2208
2130
2118
2172
DIA. OF BOLTS
1-3/4
1-3/4
1-1/8
1-3/8
NO. OF BOLTS
44
44
44
52
RATING
SYMBOL
76.2
66.7
API
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 150
CL. 300
CL. 600
1457.5
1493.8
1612.9
1720.9
1625.6
1581.2
1720.9
120.7
157.2
242.8
342.9
209.6
238.3
342.9
47.8
69.9
142.8
209.6
115.8
144.5
209.6
2102
2139
2224
2324
2191
2220
2324
DIA. OF BOLTS
7/8
1-1/8
1-7/8
1-3/4
NO. OF BOLTS
48
52
48
32
44
32
32
RING NO.
REFERENCE DATA
Page
35
of
JPEP-0-1360-T-4141
43
REV. 0

L 2057.4
S 1371.6
1371.6
852.2
90
685.8
PIPE
90 ELBOW
45 ELBOW
4115
REDUCER
SHORT PIPE
2910
2910
1205
4115
2057
90 ELBOW-90 ELBOW
1704
2910
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
1587.5
1555.8
FF
SO
SO
WN
SO
WN
SO
WN
SO
WN
1682.8
1682.8
1562.1
1612.9
79.4
63.5
111.1
136.5
209.6
169
154
201
227
300
101.6
152.4
136.5
196.9
34.9
34.9
76.2
2227
2211
2259
2284
2357
2159
2210
2194
2254
1-1/8
1-3/4
1-3/4
1-1/8
1-3/8
44
44
44
52
DIA. OF BOLTS
NO. OF BOLTS
68
64
RATING
SYMBOL
76.2
66.7
API
120.7
114.3
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 150
CL. 300
CL. 600
1508.3
1549.4
1673.4
1778.0
1682.8
1657.4
1778.0
125.5
162.1
239.8
355.6
215.9
252.5
355.6
49.3
71.4
136.7
216.0
120.7
152.4
215.9
2183
2220
2297
2413
2273
2310
2413
DIA. OF BOLTS
7/8
1-1/8
1-7/8
1-3/4
2-1/4
NO. OF BOLTS
48
56
48
32
44
28
32
RING NO.
REFERENCE DATA
Page
36
of
JPEP-0-1360-T-4141
43
REV. 0

L 2133.6
S 1422.4
1422.4
883.8
90
711.2
PIPE
90 ELBOW
45 ELBOW
4267
REDUCER
SHORT PIPE
3018
3017
1250
4267
2134
90 ELBOW-90 ELBOW
1768
3017
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
FF
SO
SO
WN
SO
WN
SO
WN
SO
WN
DIA. OF BOLTS
NO. OF BOLTS
RATING
SYMBOL
API
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 150
CL. 300
CL. 600
1574.8
1600.2
1765.3
1854.2
1746.3
1708.2
1854.2
134.9
166.6
268.2
368.3
228.6
260.4
368.3
50.8
73.2
153.9
223.8
124.0
153.9
223.8
2268
2299
2401
2501
2362
2394
2502
DIA. OF BOLTS
1-1/8
2-1/4
3-1/4
1-3/4
2-1/4
3-1/4
NO. OF BOLTS
40
60
36
32
48
28
32
RING NO.
REFERENCE DATA
Page
37
of
JPEP-0-1360-T-4141
43
REV. 0

L 2209.8
S 1473.2
1473.2
915.3
90
736.6
PIPE
90 ELBOW
45 ELBOW
4420
REDUCER
SHORT PIPE
3125
3125
1294
4420
2210
90 ELBOW-90 ELBOW
1831
3125
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
FF
SO
SO
WN
SO
WN
SO
WN
SO
WN
DIA. OF BOLTS
NO. OF BOLTS
RATING
SYMBOL
API
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 150
CL. 300
CL. 600
1625.6
1674.9
1827.3
1905.0
1803.4
1759.0
1905.0
138.2
174.8
274.6
376.2
235.0
266.7
376.2
52.3
74.7
153.9
228.6
128.5
158.8
228.6
2348
2385
2484
2586
2445
2477
2586
DIA. OF BOLTS
1-1/4
2-1/4
3-1/4
1-3/4
2-1/4
3-1/4
NO. OF BOLTS
44
48
40
32
48
32
32
RING NO.
REFERENCE DATA
Page
38
of
JPEP-0-1360-T-4141
43
REV. 0

L 2286
S 1524
1524.0
946.9
90
762
PIPE
90 ELBOW
45 ELBOW
4572
REDUCER
SHORT PIPE
3233
3233
1339
4572
2286
90 ELBOW-90 ELBOW
1894
3233
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
1739.9
1708.2
FF
SO
SO
WN
SO
WN
SO
WN
SO
WN
1854.2
1854.2
1714.5
1765.3
92.1
69.9
114.3
149.2
215.9
182
160
204
239
306
111.1
155.6
146.1
203.2
41.3
38.1
79.4
2468
2446
2490
2525
2592
2397
2442
2432
2489
DIA. OF BOLTS
1-1/8
1-3/4
1-3/4
1-1/8
1-3/8
NO. OF BOLTS
72
52
52
48
60
RATING
SYMBOL
79.4
69.9
API
127.0
114.3
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 150
CL. 300
CL. 600
1676.4
1725.7
1878.1
1993.9
1854.2
1810.0
1993.9
144.5
179.3
271.5
395.2
239.8
273.1
395.2
55.6
76.2
150.8
239.8
131.8
163.6
239.8
2431
2465
2558
2681
2526
2559
2681
DIA. OF BOLTS
1-1/4
2-1/4
3-1/2
1-3/4
2-1/4
3-1/2
NO. OF BOLTS
44
52
40
28
52
32
28
RING NO.
REFERENCE DATA
Page
39
of
JPEP-0-1360-T-4141
43
REV. 0

L 2514.6
S 1676.4
1676.4
1041.6
90
838.2
PIPE
90 ELBOW
45 ELBOW
5029
REDUCER
SHORT PIPE
3556
3556
1473
5029
2515
90 ELBOW-90 ELBOW
2083
3556
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
SYMBOL
SO
WN
1917.7
1879.6
FF
SO
SO
WN
SO
WN
SO
WN
WN
2032.0
2032.0
1866.9
1955.8
101.6
69.9
123.8
174.6
192
160
214
265
123.8
161.9
155.6
215.9
38.1
85.7
101.6
44.5
47.6
101.6
79.4
2706
2675
2728
2779
2638
2677
2670
2731
DIA. OF BOLTS
1-1/4
1-3/4
1-3/4
1-1/8
1-1/2
NO. OF BOLTS
72
52
52
56
60
RATING
SYMBOL
API
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 150
CL. 300
CL. 600
DIA. OF BOLTS
NO. OF BOLTS
RING NO.
1
Note ( ) : TAYLOR FORGE only.
REFERENCE DATA
Page
40
of
JPEP-0-1360-T-4141
43
REV. 0

L 2743.2
S 1828.8
1828.8
1136.3
90
914.4
PIPE
90 ELBOW
45 ELBOW
5486
REDUCER
SHORT PIPE
3880
3880
1607
5486
2743
90 ELBOW-90 ELBOW
2273
3880
45 ELBOW-45 ELBOW
90 ELBOW-45 ELBOW
WN
WN90 ELBOW
C
E
A
B
SOSHORT PIPE
(UNIT : mm)
RADISH
50 lb RF
125 lb FF
150 lb RF
TAYLOR FORGE
CL. 75 RF
CL. 125 LW
CL. 125 FF
CL. 175 RF
CL. 250 RF
CL. 350 RF
WN
WN
SYMBOL
SO
WN
2070.1
2032.0
FF
SO
SO
WN
SO
WN
2197.1
2197.1
2032.0
2108.2
114.3
69.9
127.0
203.2
204
160
217
293
133.4
165.1
168.3
228.6
38.1
88.9
101.6
50.8
57.2
127.0
92.1
2948
2903
2960
3036
2877
2908
2912
2972
DIA. OF BOLTS
1-1/4
1-3/4
1-3/4
1-1/8
1-1/2
NO. OF BOLTS
80
60
60
64
72
RATING
SYMBOL
API
MSS
CL. 75
CL. 150
CL. 300
CL. 600
CL. 150
CL. 300
CL. 600
DIA. OF BOLTS
NO. OF BOLTS
RING NO.
1
Note ( ) : TAYLOR FORGE only.
REFERENCE DATA
Page
41
JPEP-0-1360-T-4141
of
43
REV. 0
EXPLANATION DIMENSIONS FOR PIPING COMPONENTS
The types and dimensions of pipe fittings and valves shall be indicated by the minimum dimensions given
in the following Tables showing the applicable standards.
1.
Fittings
: The standards given in Table 1.
2.
Flanges and stub ends : The standards given in Table 2.
3.
Valves
: The standards given in Table 3.
Table 1
Type of Connection
Parts
Socket Weld Type
90 Elbows
45 Elbows
Tees
Couplings
Standards for Piping Fittings

Pipe Size (NPS)
1/21-1/2 in.
1-1/248 in.
ANSI B 16.9-78
TABLE 2
50 in. or larger
(1)
1-1/248 in.
ANSI B 16.9-78
TABLE 5, 6
50 in. or larger
To be determined for each job.
1-1/248 in.
ANSI B 16.9-78
TABLE 9
50 in. or larger
1/22 in.
JGS 332-313-6-01
1-1/248 in.
ANSI B 16.9-78
TABLE 8
50 in. or larger
Tees
Butt Weld Type

Reduceres
Swaged Nipples
Caps
Note (1)
ANSI B 16.11-80
TABLE 4
JGS 332-313-6-14
JGS 332-313-6-15
Half Couplings
90 Elbows
45 Elbows
Applicable Standards
The dimensions of 90 and 45 elbows which are used to connect pipes whose nominal sizes are
50 in. NPS or larger shall be as follows :
90 elbows (long radius)
: 1.5D
90 elbows (short radius) : 1.0D

45 elbows
: 1.5D tan 22.5
(D : Nominal Pipe Size-inch)
( 2)
The dimension of double extra strong pipe (XXS) are based on ANSI B 36.10.
REFERENCE DATA
Page
JPEP-0-1360-T-4141
Table 2
Standards for Flanges and Stub Ends
Standards and Sizes (NPS)
Flange
Class/Facing
ANSI
(1/224 in.)
150
300
600
900
1500
2500
RF
RF, RJ
RF, RJ
RJ
RJ
RJ
ANSI B 16.5-81
TAYLOR FORGE
(2672 in.)
CL.
CL.
CL.
CL.
CL.
75
125
175
250
350
RF
LW, FF
RF
RF
RF
TAYLOR FORGE
CATALOG 722
50
125
150
250
300
lb
lb
lb
lb
lb
LADISH (2672 in.)

WN 2660 in.
SO 2672 in.
(2672 in.)
(2646 in.)
(2648 in.)
API
Large-Diameter
Flange
(2660 in.)
Stub End
42
RF
RF
RF
RF
RF
LADISH
CATALOG No.55
CL. 75 RF
CL. 150 RF
CL. 300 RF
API Std 605-81

TABLE 24
CL. 600 RF
CL. 900 RF
API Std 605-81

TABLE 6, 7
MSS
(2660 in.)
CL.
CL.
CL.
CL.
150
300
600
900
RF
RF
RF, RJ
RF, RJ
ANSI
(1/224 in.)
CL. 150 RF
CL. 300 RF, RJ
MSS SP-44-85
TABLE 37
ANSI B 16.9-78
TABLE 7
Note : Facings indicated are not complete facings available for some of the standards.
These other facings shall be determined for each job.
of
43
REV. 0
REFERENCE DATA
Page
JPEP-0-1360-T-4141
Table 3
Valve Sizes (NPS)
Standards and
Connections
ANSI ( )
Valves
(1-1/224 in.)
Note (3)
API
Std 602-85
(CL. 800 COMPACT SW)
125
150
300
600
900
1500
2500
of
43
REV. 0
Applicable Standards for Valves

Type of
Valves
Gate
Small-Diameter
Valves
(1/21-1/2 in.)
43
FF
RF
RF, RJ
RF, RJ
RJ
RJ
RJ
Globe
Check
Gate
Globe
Check
Shoritu New Design (equivalent to API
602 standard)
Oka Compact Valves, Above standards
are the manufacturers maximum
values.
ANSI B 16.10-86
TABLE 1, 2, 47
The face-to-face dimensions for ANSI valves are the values obtained by converting inch units
to millimeter units and rounding off decimal fractions of 0.5 mm and over to the nearest
higher 1 mm increment.

Jpep 0 1360 T 4141 PDF

Uploaded by

Copyright:

Available Formats

Jpep 0 1360 T 4141 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Jpep 0 1360 T 4141 PDF

Uploaded by

Copyright:

Available Formats

Dimensions

Issue Date: 01 Apr 2002

Responsible Dep.: Piping Engineering Dep.:

Dimensions for Piping Components

for slip-on flanges, however, a surplus of 20 mm shall be added as

Dimensions for Piping Components

PIPING (MIN.) DIMENSION 1/2

XXS, Sch. 160 35

XXS, Sch. 160 120

SWAGED NIPPLEELBOW OR TEE

Dimensions for Piping Components

PIPING (MIN.) DIMENSION 3/4

XXS, Sch. 160 40

XXS, Sch. 160 135

SWAGED NIPPLEELBOW OR TEE

Dimensions for Piping Components

PIPING (MIN.) DIMENSION 1

XXS, Sch. 160 45

XXS, Sch. 160 155

SWAGED NIPPLEELBOW OR TEE

Dimensions for Piping Components

PIPING (MIN.) DIMENSION 1-1/2

XXS, Sch. 160 50

XXS, Sch. 160 190

SWAGED NIPPLEELBOW OR TEE

Dimensions for Piping Components

PIPING (MIN.) DIMENSION 1-1/2

XXS, Sch. 160 50

SOSHORT PIPE90 ELBOW

SOSHORT PIPEST TEE

Dimensions for Piping Components

PIPING (MIN.) DIMENSION 2

XXS, Sch. 160 50

SOSHORT PIPE90 ELBOW

SOSHORT PIPEST TEE

Dimensions for Piping Components

PIPING (MIN.) DIMENSION 2-1/2

XXS, Sch. 160 60

SOSHORT PIPE90 ELBOW

SOSHORT PIPEST TEE

Dimensions for Piping Components

PIPING (MIN.) DIMENSION 3

XXS, Sch. 160 65

SOSHORT PIPE90 ELBOW

SOSHORT PIPEST TEE

Dimensions for Piping Components

PIPING (MIN.) DIMENSION 4

XXS, Sch. 160 75

SOSHORT PIPE90 ELBOW

SOSHORT PIPEST TEE

Dimensions for Piping Components

PIPING (MIN.) DIMENSION 5

XXS, Sch. 160 80

SOSHORT PIPE90 ELBOW

SOSHORT PIPEST TEE

Dimensions for Piping Components

PIPING (MIN.) DIMENSION 6

XXS, Sch. 160 95

SOSHORT PIPE90 ELBOW