Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 622 views

    Gutter Detail

    Uploaded by

    arkiku
    This document provides details for installing a sheet metal edge flashing and Polyglass modified bitumen roof membrane system. Key steps include priming the flange before stripping, setting the flange in Polyplus flashing cement, and attaching multiple-ply Polyglass membrane stripping plies. Fasteners and gutter brackets are installed at spaced intervals to support the continuous sheet metal closure.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Gutter Detail

    Uploaded by

    arkiku
    622 views1 page
    This document provides details for installing a sheet metal edge flashing and Polyglass modified bitumen roof membrane system. Key steps include priming the flange before stripping, setting the flange in Polyplus flashing cement, and attaching multiple-ply Polyglass membrane stripping plies. Fasteners and gutter brackets are installed at spaced intervals to support the continuous sheet metal closure.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides details for installing a sheet metal edge flashing and Polyglass modified bitumen roof membrane system. Key steps include priming the flange before stripping, setting the flange in Polyplus flashing cement, and attaching multiple-ply Polyglass membrane stripping plies. Fasteners and gutter brackets are installed at spaced intervals to support the continuous sheet metal closure.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    622 views1 page

    Gutter Detail

    Uploaded by

    arkiku
    This document provides details for installing a sheet metal edge flashing and Polyglass modified bitumen roof membrane system. Key steps include priming the flange before stripping, setting the flange in Polyplus flashing cement, and attaching multiple-ply Polyglass membrane stripping plies. Fasteners and gutter brackets are installed at spaced intervals to support the continuous sheet metal closure.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    SHEET METAL EDGE FLASHING Detail is Applicable

    PRIME FLANGE BEFORE STRIPPING for APP, SBS and


    Self-Adherd POLYGLASS
    POLYGLASS MODIFIED Membranes.
    BITUMEN ROOF MEMBRANE SYSTEM

    SET FLANGE IN POLYPLUS


    FLASHING CEMENT
    MULTIPLE-PLY POLYGLASS
    MEMBRANE STRIPPING
    PLIES

    FASTENERS AT
    APPROX. 3"
    O.C., STAGGERED

    GUTTER SPACER
    ALTERNATELY SPACED
    FROM BRACKETS
    ROOF
    DECK OPTIONAL: FLEXIBLE
    POLYGLASS SA MEMBRANE
    WOOD CLOSURE; EXTEND
    NAILERS INTO GUTTER

    CONTINUOUS CLEAT *
    (FASTENED MAX. 12" O.C.)

    CONTINUOUS SHEET GUTTER BRACKET


    METAL CLOSURE SUPPORT AT 12" TO
    FASTENED APPROX. 18" 24" O.C. DEPENDING
    [457mm] O.C. UPON CONDITIONS

    EXTEND ONE PLY OR SHEET METAL GUTTER


    A SEPARATE MEMBRANE
    SHEET TO OVERLAY OPTIONAL: TURN-DOWN
    METAL CLOSURE

    * CONTINUOUS CLEAT IS RECOMMENDED TO BE AT LEAST ONE GAUGE HEAVIER THAN


    EDGE FLASHING METAL
    NOTES:
    1. ATTACH WOOD NAILER TO WALL/DECK IN ACCORDANCE WITH FMRC GUIDLINES, AS PER
    SECTION 1-28, REGARDING WINDLOADS TO ROOF SYSTEMS & DECK SECUREMENT.
    2. WOOD BLOCKING MAY BE SLOTTED FOR VENTING OF WET-FILL DECKS OR OTHER APPLICABLE
    CONSTRUCTIONS
    3. THIS DETAIL SHOULD BE USED ONLY WHERE THE DECK IS SUPPORTED BY THE OUTSIDE WALL
    4. REFER TO SMACNA RECOMMENDATIONS & DETAILS REGARDING METAL THICKNESS & CLEAT REQUIREMENTS
    5. MEMBRANE ENDLAPS MUST BE 6" MINIMUM & FULLY ADHERED AT ALL MEMBRANE IN ALL LOCATIONS
    WHERE "FAST LAP" IS NOT PRESENT

    NUMBER: PG009
    GUTTER DETAIL Polyglass USA Inc.
    DATE: Corporate Office and Manufacturing Facility: 150 Lyon Drive, Fernley, Nevada 89408

    (ALTERNATE) 05.17.01 Phone (775) 575.6007 - Fax (775) 575.2314 - Toll Free (800) 222-9782
    Manufacturing Facilities: 555 Oakridge Road, Humboldt Industrial Park , Hazleton, Pennsylvania 18201
    Tel. (570) 384.1230 - Fax (570) 384.3282 - Toll Free (800) 894-4563
    621 Snively Avenue, Winterhaven, Florida 33880
    REVISION: 02/18/2007 Phone: 863-297-5800 - Fax: 863-297-5858 - Toll Free: 866-802-8017
    e-mail: technical@polyglass.com • www.polyglass.com

    You might also like