Solved Multiple Choice Questions of Operating System

For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

Solved MCQs on Operating System Principles

Set-1
1. Which of the following is/ are the part of operating system?
A) Kernel services
B) Library services
C) Application level services
D) All of the above
2. The system of ............... generally ran one job at a time. These were called single stream batch
processing.
A) 40's
B) 50's
C) 60's
D) 70's
3. In ............. generation of operating system, operating system designers develop the concept of
multiprogramming in which several jobs are in main memory at once.
A) First
B) Second
C) Third
D) Fourth
4. State True or False.
i) In spooling high speed device like a disk is interposed between running program and low-speed device
in Input/output.
ii) By using spooling for example instead of writing directly to a printer, outputs are written to the disk.
A) i-True, ii-False
B) i-True, ii-True
C) i-False, ii-True
D) i-False, ii-False
5. Which of the following is/are the functions of operating system?
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

i) Sharing hardware among users.

ii) Allowing users to share data among themselves.

iii) Recovering from errors.

iv) Preventing users from interfering with one another.

v) Scheduling resources among users.

A) i, ii, iii and iv only
B) ii, iii, iv and v only
C) i, iii, iv and v only
D) All i, ii, iii, iv and v
6. .................. executes must frequently and makes the fine grained decision of which process to
execute the next.
A) Long-term scheduling
B) Medium-term scheduling
C) Short-term scheduling
D) None of the above
7. With ................ a page is brought into main memory only when the reference is made to a location
on that page.
A) demand paging
B) main paging
C) prepaging
D) postpaging
8. ....................... provides a larger sized of virtual memory but require virtual memory which provides
multidimensional memory.
A) Paging method
B) Segmentation method
C) Paging and segmentation method
D) None of these
9. ............... is a large kernel containing virtually the complete operating system, including,
scheduling, file system, device drivers and memory management.
A) Multilithic kernel
B) Monolithic kernel
C) Micro kernel
D) Macro kernel
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

10. ............... is a large operating system core provides a wide range of services.
A) Multilithic kernel
B) Monolithic kernel
C) Micro kernel
D) Macro kernel
11. Which of the following is not the function of Microkernel?
A) File management
B) Low-level memory management
C) Inter-process communication
D) I/O interrupts management
12. Match the following.
i) Mutual exclusion

a) A process may hold allocated resources while waiting assignment.

ii) Hold and wait

b) No resource can be forcibly removed from a process holding it.

iii) No preemption

c) Only one process may use a resource at a time.

A) i-a, ii-b, iii-c

B) i-a, ii-c, iii-b
C) i-b, ii-c, iii-a
D) i-c, ii-a, iii-b
13. A direct method of deadlock prevention is to prevent the occurrences of ...................
A) Mutual exclusion
B) Hold and wait
C) Circular waits
D) No preemption
14. The methods or algorithms which are used to increase the performance of disk storage sub-system
is called .............
A) Disk performing
B) Disk scheduling
C) Disk storing
D) Disk extending
15. ................. is the time required to move the disk arm to the required track.
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

A) Seek time
B) Rotational delay
C) Latency time
D) Access time
16. The ............... policy restricts scanning to one direction only.
A) SCAN
B) C-SCAN
C) N-Step SCAN
D) Both A and B
17. ............... policy selects the disk I/O request that requires the least movement of the disk arm
from its current position.
A) FSCAN
B) SSTF
C) SCAN
D) C-SCAN
18. .................. refers to the ability of an operating system to support multiple threads of execution
with a single process.
A) Multithreading
B) Multiprocessing
C) Multiexecuting
D) Bi-threading
19. State whether the following statement is true.
i) It takes less time to terminate a thread than a process.
ii) Threads enhance efficiency in communication between different executing programs.
A) i-True, ii-False
B) i-True, ii-True
C) i-False, ii-True
D) i-False, ii-False

20. ............ is a special type of programming language used to provide instructions to the monitor
simple batch processing schema.
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

A) Job control language (JCL)
B) Processing control language (PCL)
C) Batch control language (BCL)
D) Monitor control language (MCL)

Answers:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

D) All of the above

B) 50's
C) Third
B) i-True, ii-True
D) All i, ii, iii, iv and v
C) Short-term scheduling
A) demand paging
B) Segmentation method
B) Monolithic kernel
D) Macro kernel
A) File management
D) i-c, ii-a, iii-b
C) Circular waits
B) Disk scheduling
A) Seek time
A) SCAN
B) SSTF
A) Multithreading
B) i-True, ii-True
A) Job control language (JCL)

For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

Set-2
1. The first batch operating system was developed in the................. by General Motors for use on an
IBM 701.
A) mid 1940's
B) mid 1950's
C) mid 1960's
D) mid 1970's
2. Process is ........................
A) A program in execution
B) An instance of a program running on a computer.
C) The entity that can be assigned to and executed
D) All of the above.
3. ................... is a facility that allows programmers to address memory from a logical point of view,
without regard to the main memory, physically available.
A) Visual memory
B) Real memory
C) Virtual memory
D) Secondary memory

4. ............ is a large kernel, including scheduling file system, networking, device drivers, memory
management and more.
A) Monolithic kernel
B) Micro kernel
C) Macro kernel
D) Mini kernel
5. A .................... architecture assigns only a few essential functions to the kernel, including address
spaces, Inter process communication(IPC) and basic scheduling.
A) Monolithic kernel
B) Micro kernel
C) Macro kernel
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

D) Mini kernel
6. State whether true or false.
i) Multithreading is useful for application that perform a number of essentially independent tasks that
do not be serialized.
ii) An example of multithreading is a database server that listens for and process numerous client
request.
A) i-True, ii-False
B) i-True, ii-True
C) i-False, ii-True
D) i-False, ii-False
7. With ................ only one process can execute at a time; meanwhile all other process are waiting for
the processer. With.............. more than one process can be running simultaneously each on a
different processer.
A) Multiprocessing, Multiprogramming
B) Multiprogramming, Uniprocessing
C) Multiprogramming, Multiprocessing
D) Uniprogramming, Multiprocessing
8. The two central themes of modern operating system are...............
A) Multiprogramming and Distributed processing
B) Multiprogramming and Central Processing
C) Single Programming and Distributed processing
D) None of above
9. ............... refers to the ability of multiple process (or threads) to share code, resources or data in
such a way that only one process has access to shared object at a time.
A) Synchronization
B) Mutual Exclusion
C) Dead lock
D) Starvation
10. ................. is the ability of multiple process to co-ordinate their activities by exchange of
information
A) Synchronization
B) Mutual Exclusion
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

C) Dead lock
D) Starvation
11. .............. refers to a situation in which a process is ready to execute but is continuously denied
access to a processor in deference to other processes.
A) Synchronization
B) Mutual Exclusion
C) Dead lock
D) Starvation
12. Which of the following is not the approach to dealing with deadlock?
A) Prevention
B) Avoidance
C) Detection
D) Deletion
13. Which of the following are the states of a five state process model?
i) Running

ii) Ready

iii) New

iv) Exit

v) Destroy

A) i, ii, iii and v only

B) i, ii, iv and v only
C) i, ii, iii, and iv only
D) All i, ii, iii, iv and v
14. State which statement is true for Suspended process?
i) The process is not immediately available for execution.
ii) The process may be removed from suspended state automatically without removal order.
A) i only
B) ii only
C) i and ii only
D) None
15. Following is/are the reasons for process suspension.
A) Swapping parent process
B) Inter request
C) Timing
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

D) All of the above
16. The different types of tables maintained by the operating system are .............
A) memory, logical , I/O file
B) memory, I/O, file, physical
C) memory, I/O, file, process
D) memory, logical, I/O, physical
17. Which of the following information not included in memory table?
A) The allocation of main memory to process.
B) The allocation of secondary memory to process
C) Any information needed to manage virtual memory
D) Any information about the existence of file
18. Process Management function of an operating system kernel includes.
A) Process creation and termination.
B) Process scheduling and dispatching
C) Process switching
D) All of the above
19. The typical elements of process image are .....................
i) User data

ii) System Data

iii) User program

iv) System stack

A) i, iii and iv only

B) i, ii, and iv only
C) ii, iii, and iv only
D) All i, ii, iii, and iv
20. Match the following mechanisms for interrupting the execution of a process and their uses.
i) Interrupt

a) Call to an operating system function

ii) Trap

b) Reaction to an asynchronous external event

iii) Supervisor Call

c) Handling of a error or an exception condition

A) i-a, ii-b, iii-c

B) i-c, ii-a, iii-b
C) i-b, ii-c, iii-a
D) i-a, ii-c, iii-b
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

Answers
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

B) mid 1950's
D) All of the above.
C) Virtual memory
A) Monolithic kernel
B) Micro kernel
B) i-True, ii-True
C) Multiprogramming, Multiprocessing
A) Multiprogramming ......processing
B) Mutual Exclusion
A) Synchronization
D) Starvation
D) Deletion
C) i, ii, iii, and iv only
A) i only
D) All of the above
C) memory, I/O, file, process
D) Any information..... of file
D) All of the above
A) i, iii and iv only
C) i-b, ii-c, iii-a

Related Posts:

Solved MCQ of Operating System Principles set-1

Solved MCQ of Operating System Principles set-2

Solved MCQ of Operating System Theory set-3

MCQ of Operating System with answer set-4

Solved MCQ of Operating System Set-5

Solved MCQ of Operating System Set-6

Solved MCQ Questions on Operating System set-7

For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

Set-3
1. The unit of dispatching is usually referred to as a ..
A) Thread
B) Lightweight process
C) Process
D) Both A and B
2. .. is a example of an operating system that support single user process and single thread.
A) UNIX
B) MS-DOS
C) OS/2
D) Windows 2000
3. State true or false.
i) Unix, support multiple user process but only support one thread per process.
ii) A java run time environment is an example of a system of one process with multiple threads.
A) True, False
B) True, True
C) False, True
D) False, False
4. are very effective because a mode switch is not required to switch from one thread to
another.
A) Kernel-level threads
B) User-level threads
C) Alterable threads
D) Application level threads
5. is a condition in which there is a set of concurrent processes, only one of which is able to
access a given resource or perform a given function at any time.
A) Mutual Exclusion
B) Busy Waiting
C) Deadlock
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

D) Starvation
6. . Techniques can be used to resolve conflicts, such as competition for resources, and to
synchronize processes so that they can cooperate.
A) Mutual Exclusion
B) Busy Waiting
C) Deadlock
D) Starvation
7. . Can be defined as the permanent blocking of a set of processed that either complete for
system resources or communicate with each other.
A) Deadlock
B) Permanent lock
C) Starvation
D) Mutual exclusion
8. The following conditions of policy must be present for a deadlock to be possible.
i) Mutual exclusion

ii) Hold and wait

iii) No preemption

iv) Circular wait

A) i, ii and iii only

B) ii, iii and iv only
C) i, iii and iv only
D) All i, ii, iii and iv
9. A direct method of deadlock prevention is to prevent the occurrence of ..
A) Mutual exclusion
B) Hold and wait
C) Circular waits
D) No preemption
10. State true of false.
i) With paging, each process is divided into relatively small, fixed-size pages.
ii) Segmentation provides for the use of pieces of varying size.
A) Partition management
B) Memory management
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

C) Disk management
D) All of the above

Answers
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

D) Both A and B
B) MS-DOS
B) True, True
B) User-level threads
A) Mutual Exclusion
A) Mutual Exclusion
A) Deadlock
D) All i, ii, iii and iv
C) Circular waits
B) Memory management

Related Posts:

Solved MCQ of Operating System Principles set-1

Solved MCQ of Operating System Principles set-2

Solved MCQ of Operating System Theory set-3

MCQ of Operating System with answer set-4

Solved MCQ of Operating System Set-5

Solved MCQ of Operating System Set-6

Solved MCQ Questions on Operating System set-7

For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

Set-4
1. . Involves treating main memory as a resource to be allocated to and shared among a
number of active processes.
A) Partition management
B) Memory management
C) Disk management
D) All of the above
2. A process that execute only in main memory is referred to as and that allocated in disk is
referred to a .
A) Virtual memory, true memory
B) Virtual memory, real memory
C) Real memory, virtual memory
D) Imaginary memory, real memory
3. In process scheduling, determines when new processes are admitted to the system.
A) long term scheduling
B) medium term scheduling
C) short term scheduling
D) none of the above
4. In process scheduling, determines which ready process will be executed next by
processor.
A) long term scheduling
B) medium term scheduling
C) short term scheduling
D) none of the above
5. The sum of the seek time, and the rotational delay is called the ..
A) reached time
B) access time
C) arrived time
D) common time
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

6. The .. policy segments the disks request queue into sub queues of the length N.
A) SCAN
B) C-SCAN
C) N-Step SCAN
D) FSCAN
7. Which of the following are the functions of operating system?
i) recovering from errors

ii) facilitating input/output

iii) facilitating parallel operation

iv) sharing hardware among users

v) implementing user interface

A) i, ii, ii, and v only
B) i, ii, iii, and iv only
C) ii, iii, iv and v only
D) All i, ii, iii, iv and v
8. File management function of the operating system includes
i) File creation and deletion

ii) Disk scheduling

iii) Directory creation

iv) Mapping file in secondary storage.

A) i, ii and iii only

B) i, iii and iv only
C) ii, iii and iv only
D) All i, ii, iii and iv
9. The . Determines when a page should be brought into main memory.
A) Fetch policy
B) Placement policy
C) Replacement policy
D) Resident set management
10. With . A page is written out to secondary memory only when it has been selected for
replacement.
A) pre-cleaning
B) demand cleaning
C) required cleaning
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

D) fast cleaning

Answers
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

B) Memory management
C) real . virtual memory
A) long term scheduling
C) short term scheduling
B) access time
C) N-Step SCAN
D) All i, ii, iii, iv and v
B) i, iii and iv only
A) Fetch policy
B) demand cleaning

Related Posts:

Solved MCQ of Operating System Principles set-1

Solved MCQ of Operating System Principles set-2

Solved MCQ of Operating System Theory set-3

MCQ of Operating System with answer set-4

Solved MCQ of Operating System Set-5

Solved MCQ of Operating System Set-6

Solved MCQ Questions on Operating System set-7

For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

Set-5
1) The process is........
A. an instance of a program in execution
B. a program only
C. a processor state
D. the kernel state

2) The mechanism that brings a page into memory only when it is needed is called.....
A. segmentation
B. fragmentation
C. demand paging
D. page replacement

3) The two paradigms if IPC are ............ and.......

A. call, reply
B. shared memory, message passing
C. send, receive
D. call by value, call by reference

4) A program is passive while a process is..........

A. inactive
B. spontaneous
C. active
D. impulse

5) FIFO scheduling is..........

A. preemptive scheduling
B. non preemptive scheduling
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

C. deadline scheduling
D. fair share scheduling

6) ......... ensures that once transaction completes successively, the results of the operations become
permanent.
A. serializability
B. synchronizability
C. atomicity
D. durability

7) A process is created and is initially put in the........

A. ready queue
B. device queue
C. i/o queue
D. waiting queue

8) Which directory implementation is used in most of the Operating System?

A. single level directory structure
B. two level directory structure
C. tree directory structure
D. acyclic directory structure

9) Isolation property is also known as.........

A. Performance
B. Serializability
C. Durability
D. Atomicity

10) A thread is a..........

A. task
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

B. process
C. program
D. light weight process

11) The interval from the fine submission of a process to the time of completion is the......
A. waiting time
B. blocked time
C. turnaround time
D. response time

12) The term "Operating System" means..........

A. a set of programs which controls computer working
B. the way a computer operator works
C. conversion of high-level language in to machine level language
D. the way a floppy disk drive operates

13) Generally we have user level threads and...........

A. Programmer level thread
B. kernel level thread
C. program level thread
D. process level thread

14) To ensure that the ......... condition never occurs in the system, we must guarantee that, whenever a
process requests a resource, it does not have any other resource.
A. mutual exclusion
B. no-preemption
C. circular waits
D. hold and wait

For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

15) Resource locking........
A. allows multiple tasks to simultaneously use resource
B. forces only on takes to use any resource at any time
C. can easily cause a dead lock condition
D. in not used for disk drives

16) A program responsible for assigning the CPU to the process that has been selected by the short term
scheduler is known as.........
A. scheduler
B. dispatcher
C. debugger
D. compiler

17) The .......... instruct Kernel to do various operations of the calling program and exchange data
between the Kernel at the program.
A. shell
B. editors
C. system calls
D. commands

18) Which of the following buffering strategies are used in interprocess communication?
A. null pointer
B. single message buffer
C. multiple message buffer
D. all of the above
19) The process of splitting of data into equal size partitions over multiple disks is known as .....
A. data stripping
B. array of disks
C. RAID
D. SCAN
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

20) Pipes allow transfer of data between processor in a .......... manner.
A. last in first out
B. shortest job first
C. multilevel queue
D. first in first out

Answers:
1) A. an instance of a program in execution
2) C. demand paging
3) B. shared memory, message passing
4) C. active
5) B. non preemptive scheduling
6) D. durability
7) A. ready queue
8) C. tree directory structure
9) B. Serializability
10) D. light weight process
11) C. turnaround time
12) A. a set of programs which controls computer working
13) B. kernel level thread
14) D. hold and wait
15) B. forces only on takes to use any resource at any time
16) B. dispatcher
17) C. system calls
18) D. all of the above
19) A. data stripping
20) D. first in first out

For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

Set-6
1) The process of storing extra or duplicate information used for rebuilding the lost information in event
of disks failure is known as...
A. stripping
B. redundancy
C. disk array
D. RAID

2) A thread that is to be cancelled is often referred to as the....

A. target thread
B. thread cancellation
C. asynchronous cancellation
D. defined cancellation

3) ........... ensures the every message sent to a group of receivers will be delivered to either all of them
or none of them.
A. Ordered delivery
B. Atomicity
B. Survivability
D. Reliability

4) An arrangement of record in a sequence in which they arrive is known as a ...........

A. pile
B. file
C. disk
D. directory

5) ........... also known as monitor mode.

A. User mode
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

B. System mode
C. Unprivileged mode
D. Process mode

6) The technique, for sharing the time of a computer among several jobs, which switches jobs so rapidly
such that each job appears to have the computer to itself, is called........
A. time sharing
B. time out
C. time domain
D. multitasking

7) For batch and payroll applications which of the following file organization is better........
A. random file
B. sequential file
C. indexed file
D. hashed file

8) Name the scheduler that selects among the processes that are ready to execute and allocates the CPU
to one of them.
A. Long term scheduler
B. Medium term scheduler
C. Job scheduler
D. Short term scheduler

9) Failure during inter-process communication may be due to.....

A. loss of request transfer unit
B. single datagram messages
C. multidatagram messages
D. message passing

For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

10) The process of direct mapping by using some faster algorithms is called as.........
A. hashing
B. searching
C. sorting
D. indexing

11) Name the system in which the processors do not share memory and each processor that its own
local memory.
A. Tightly coupled system
B. Parallel processing system
C. Loosely coupled system
D. Batch processing system

12) Which technique was introduced because a single job could not keep both the CPU and I/O devices
busy?
A. Time-sharing
B. Spooling
C. preemptive scheduling
D. Multiprogramming

13) Those directories in which the root directory has all system file and no other sub-directory is known
as ...
A. flat directory
B. single directory
C. hierarchical directory
D. indexed directory

14) Which is responsible for maintaining all the important abstractions of the operating system?
A. Kernel
B. System libraries
C. System utilities
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

D. Daemons

15) A four message reliable IPC protocol for client server communication works as........
A. request, reply, acknowledgement
B. reply, acknowledgement, request, acknowledgement
C. request, acknowledgement, reply, acknowledgement
D. request, request, reply, acknowledgement

16) A path name that starts at root directory is..........

A. absolute
B. relative
C. hybrid
D. hierarchical

17) Where does the problem of fragmentation occur?

A. Static storage allocation
B. Static allocation storage
C. Stack allocation with dynamic binding
D. Heap allocation

18) Idempotency basically means.........

A. reliability
B. repeatability
C. Survivability
D. flexibility

19) All path names are specified relative to the working directory........
A. absolute path name
B. relative path name
C. hybrid path name
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

D. hierarchical path name
20) The time taken by the disk arm to locate the specific address of a sector for getting information is
called........
A. rotational latency
B. seek time
C. search time
D. response time

Answers:
1) B. redundancy
2) A. target thread
3) B. Atomicity
4) A. pile
5) B. System mode
6) A. time sharing
7) B. sequential file
8) D. Short term scheduler
9) B. single datagram messages
10) A. hashing
11) C. Loosely coupled system
12) D. Multiprogramming
13) A. flat directory
14) A. Kernel
15) C. request, acknowledgement, reply, acknowledgement
16) A. absolute
17) D. Heap allocation
18) B. repeatability
19) B. relative path name
20) D. response time

For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

Set-7
1) Which of the following is crucial time while accessing data on the disk?
A. Seek time
B. Rotational time
C. Transmission time
D. Waiting time

2) What is the primary job of the operating system is a computer?

A. Command resources
B. Manage resources
C. Provide utilities
D. Be user friendly

3) The ......... is a user process that initiates a remote procedure call.

A. client
B. server
C. network
D. operating system

4) Which of the following memory allocation scheme suffers from external fragmentation?
A. Segmentation
B. Pure demand paging
C. Swapping
D. Paging

5) Which of the following is used to removal of process from active contention of CPU and reintroduce
them into memory later?
A. Interrupt
B. Swapping
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

C. Signal
D. Thread

6) The operating system manages.....

A. memory
B. processor
C. disk and I/O devices
D. all of the above

7) Information about a process is maintained in a.........

A. stack
B. translation looks a side buffer
C. process control block
D. program control block

8) Paging.........
A. solves the memory fragmentation problem
B. allows modular programming
C. allows structured programming
D. avoids deadlock

9) Which is not the layer of the Operating system?

A. Kernel
B. Shell
C. Application program
D. Critical Section

10) Distributed OS works on the ............ principle.

A. file foundation
B. single system image
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

C. multi system image
D. networking image

11) The collection of processes on the disk that is waiting to be brought into memory for execution
forms the .......
A. ready queue
B. device queue
C. input queue
D. priority queue

12) In ....... condition, processes are allowed to request for new resources without releasing the
resources that they are currently holding.
A. Mutual exclusion
B. Hold and wait
C. No preemption
D. Circular wait

13) The time taken by the disk arm to locate the specific address of a sector for getting information is
called .....
A. rotational delay
B. seek time
C. search time
D. response time

14) The principle of locality of reference justifies the use of........

A. virtual memory
B. interrupts
C. main memory
D. cache memory

For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

15) In .......... condition, a resource that has been allocated to a process becomes available for allocation
to another process only after it has been voluntarily released by the process holding it.
A. Mutual exclusion
B. Hold and wait
C. No preemption
D. Circular wait

16) Identify the odd thing in the services of operating system...

A. Accounting
B. Protection
C. Error detection and correction
D. Dead lock handling

17) Multiprocessing...........
A. makes the operating system simpler
B. allows multiple processes to run simultaneously
C. is completely understood by all major computer vendors
D. allows the same computer to have the multiple processors

18) In ............. condition, two or more processes must form a circular chain in which each process is
waiting for a resource that is held by the next member of the chain.
A. Mutual exclusion
B. Hold and wait
C. No preemption
D. Circular waits

19) Which of the following is not advantage of multiprogramming?

A. Increased throughput
B. Shorter response time
C. Decreased operating system overhead
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

D. Ability to assign priorities of jobs

20) Which is not a state of the process?

A. Blocked
B. Running
C. Ready
D. Privileged

Answers:
1) A. Seek time
2) B. Manage resources
3) A. client
4) A. Segmentation
5) B. Swapping
6) D. all of the above
7) C. process control block
8) A. solves the memory fragmentation problem
9) D. Critical Section
10) B. single system image
11) C. input queue
12) B. Hold and wait
13) B. seek time
14) D. cache memory
15) C. No preemption
16) C. Error detection and correction
17) D. allows the same computer to have the multiple processors
18) D. Circular waits
19) C. Decreased operating system overhead
20) D. Privileged
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

Solved MCQ of Computer Security
Set -1
1. In computer security, . means that computer system assets can be modified only by
authorized parities.
A) Confidentiality
B) Integrity
C) Availability
D) Authenticity
2. In computer security, .. means that the information in a computer system only be
accessible for reading by authorized parities.
A) Confidentiality
B) Integrity
C) Availability
D) Authenticity
3. The type of threats on the security of a computer system or network are ..
i) Interruption

ii) Interception

iv) Creation

v) Fabrication

iii) Modification

A) i, ii, iii and iv only

B) ii, iii, iv and v only
C) i, ii, iii and v only
D) All i, ii, iii, iv and v
4. Which of the following is independent malicious program that need not any host program?
A) Trap doors
B) Trojan horse
C) Virus
D) Worm
5. The .. is code that recognizes some special sequence of input or is triggered by being run from
a certain user ID of by unlikely sequence of events.
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

A) Trap doors
B) Trojan horse
C) Logic Bomb
D) Virus
6. The .. is code embedded in some legitimate program that is set to explode when certain
conditions are met.
A) Trap doors
B) Trojan horse
C) Logic Bomb
D) Virus
7. Which of the following malicious program do not replicate automatically?
A) Trojan Horse
B) Virus
C) Worm
D) Zombie
8. programs can be used to accomplish functions indirectly that an unauthorized user could
not accomplish directly.
A) Zombie
B) Worm
C) Trojan Horses
D) Logic Bomb
9. State whether true of false.
i) A worm mails a copy of itself to other systems.
ii) A worm executes a copy of itself on another system.
A) True, False
B) False, True
C) True, True
D) False, False
10. A .. is a program that can infect other programs by modifying them, the modification
includes a copy of the virus program, which can go on to infect other programs.
A) Worm
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

B) Virus
C) Zombie
D) Trap doors

Answers
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

B) Integrity
A) Confidentiality
C) i, ii, iii and v only
D) Worm
A) Trap doors
C) Logic Bomb
A) Trojan Horse
C) Trojan Horses
C) True, True
B) Virus

Related Posts:

Solved MCQ of Operating System Principles set-1

Solved MCQ of Operating System Principles set-2

Solved MCQ of Operating System Theory set-3

MCQ of Operating System with answer set-4

Solved MCQ of Operating System Set-5

Solved MCQ of Operating System Set-6

Solved MCQ Questions on Operating System set-7

For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

Set 2
1. .. are used in denial of service attacks, typically against targeted web sites.
A) Worm
B) Zombie
C) Virus
D) Trojan horse
2. Select the correct order for the different phases of virus execution.
i) Propagation phase

ii) Dormant phase

iii) Execution phase

iv) Triggering phase

A) i, ii, iii, and iv

B) i, iii, ii and iv
C) ii, i, iv an iii
D) ii, iii, iv and i
3. A attaches itself to executable files and replicates, when the infected program is
executed, by finding other executable files to infect.
A) Stealth virus
B) Polymorphic Virus
C) Parasitic Virus
D) Macro Virus
4. .. is a form of virus explicitly designed to hide itself from detection by antivirus
software.
A) Stealth virus
B) Polymorphic Virus
C) Parasitic Virus
D) Macro Virus
5. A .. creates copies during replication that are functionally equivalent but have
distinctly different bit patterns.
A) Boot Sector Virus
B) Polymorphic Virus
C) Parasitic Virus
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

D) Macro Virus
6. A portion of the Polymorphic virus, generally called a .. , creates, a random
encryption, key to encrypt the remainder of the virus.
A) mutual engine
B) mutation engine
C) multiple engine
D) polymorphic engine
7. State whether the following statement is true.
i) A macro virus is platform independent.
ii) Macro viruses infect documents, not executable portions of code.
A) i-only
B) ii-only
C) Both i and ii
D) Non i and ii
8. The type(s) of auto executing macros, in Microsoft word is/are
A) Auto execute
B) Auto macro
C) Command macro
D) All of the above
9. In .., the virus places an identical copy of itself into other programs or into certain system
areas on the disk.
A) Dormant phase
B) Propagation phase
C) Triggering phase
D) Execution phase
10. A is a program that secretly takes over another Internet-attached computer and then
uses that computer to launch attacks.
A) Worm
B) Zombie
C) Virus
D) Trap doors
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

Answers
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

B) Zombie
C) ii, i, iv an iii
C) Parasitic Virus
A) Stealth virus
B) Polymorphic Virus
B) mutation engine
C) Both i and ii
D) All of the above
B) Propagation phase
B) Zombie

Related Posts:

Solved MCQ of Operating System Principles set-1

Solved MCQ of Operating System Principles set-2

Solved MCQ of Operating System Theory set-3

MCQ of Operating System with answer set-4

Solved MCQ of Operating System Set-5

Solved MCQ of Operating System Set-6

Solved MCQ Questions on Operating System set-7

For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

Objective Questions on Core Operating System
Set-1
1) An optimal scheduling algorithm in terms of minimizing the average waiting time of a given set of
process is ...
A. FCFS scheduling
B. Round robin scheduling algorithm
C. Shortest job first scheduling algorithm
D. Priority scheduling algorithm

2) The hardware mechanism that enables a device to notify the CPU is called.......
A. polling
B. interrupts
C. system call
D. none of the above

3) In the running state........

A. only the process which has control of the processor is found
B. all the process waiting for I/O to be completed are found
C. all the processes waiting for the processor are found
D. none of the above

4) Which technique was introduced because a single job could keep both the CPU and the I/O devices
busy?
A. Time sharing
B. Spooling
C. Preemptive scheduling
D. Multiprogramming

For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

5) RMA works on static priorities while EDF algorithm works on........
A. starvation
B. dynamic priorities
C. RR scheduling
D. FIFO scheduling

6) In the........... method of data transfer, the participation of the processor is eliminated during data
transfer.
A. buffering
B. caching
C. direct memory access
D. indirect memory access

7) Inter process communication can be done through....

A. mails
B. messages
C. system calls
D. traps

8) RR scheduling is most suitable for........

A. time shared OS
B. distributed OS
C. real time OS
D. an Ordinary OS

9) The aim of ......... transparency is to ensure that the movement of the object is handled automatically
by the system in a user transparent manner.
A. location
B. name
B. migration
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

D. scaling

10) ........... is a memory management scheme that permits the physical address space of a process to be
noncontiguous.
A. Paging
B. Segmentation
C. Virtual memory
D. main memory

11) Context switching is........

A. part of spooling
B. part of polling
C. part of interrupt handling
D. part of paging

12) The normal functioning of an RPC may get disrupted due to..........
A. call message gets lost
B. response message gets lost
C. called node and caller node crashes and is restarted
D. All of the above

13) Mutual exclusion is referred as.......

A. if one process is in a critical region others are excluded
B. prevents deadlock
C. requires semaphore to implement
D. is found only in the Windows NT operating system

14) IFO scheduling is..........

A. preemptive
B. non-preemptive
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

C. deadline scheduling
D. RR scheduling

15) .......... deals with the process of deciding which process should be assigned to which processor.
A. Process migration
B. Processor allocation
C. threads
D. none of the above

16) Which scheduler controls the degree of multiprogramming?

A. Short term scheduler
B. Long term scheduler
C. Middle term scheduler
D. Pre term scheduler

17) Safe state is.......

A. deadlock state
B. non-deadlocked state
C. polling state
D. spooling state

18) ........ time is defined as the time period for which the execution of the process is stopped for
transferring its information to the destination node.
A. turn around
B. latency
C. freezing
D. execution

19) The principle of locality of reference justifies the use of

A. virtual memory
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

B. interrupts
C. main memory
D. cache memory
20) For a multiple instances of resource type which algorithm is used.......
A. divide and conquer algorithm
B. banker's algorithm
C. partition algorithm
D. sorting algorithm

Answers:
1) C. Shortest job first scheduling algorithm
2) B. interrupts
3) A. only the process which has control of the processor is found
4) D. Multiprogramming
5) C. RR scheduling
6) C. direct memory access
7) B. messages
8) A. time shared OS
9) B. migration
10) A. Paging
11) C. part of interrupt handling
12) D. All of the above
13) A. if one process is in a critical region others are excluded
14) B. non-preemptive
15) B. Processor allocation
16) B. Long term scheduler
17) B. non-deadlocked state
18) C. freezing
19) D. cache memory
20) B. banker's algorithm
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

Set-2
1) In memory management, a technique called as paging, the physical memory is broken into fixed sized
blocks called.........
A. pages
B. frames
C. blocks
D. segments

2) Which method is used to recover from deadlock?

A. Process termination
B. Resource preemption
C. Resource non-preemption
D. Process termination and Resource preemption

3) Saving the state of the old process and loading the saved state of the new process is called....
A. context switch
B. static
C. multi programming
D. none of the above

4) The degree of Multiprogramming is controlled by......

A. CPU scheduler
B. context switching
C. long term scheduler
D. medium term scheduler

5) Input transfers are done in advance and output transfers are done after sometimes in which of these
technique?
A. Spooling
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

B. Buffering
C. Swapping
D. Paging

6) A binary semaphore.........
A. has the values one or zero
B. is essential to binary computers
C. is used only for synchronization
D. is used only for mutual exclusion

7) A scheduling algorithm is fair.......

A. if no process faces starvation.
B. if a process is starved, detect it and run it with high priority
C. if it uses semaphores
D. only if a queue is used for scheduling

8) Which of the following is also known as double buffering?

A. anticipated buffering
B. buffer swapping
C. circular buffering
D. swapping buffering

9) .......... is the ability of a system to continue functioning in the event of partial system failure.
A. fault avoidance
B. fault tolerance
C. fault detection
D. fault recovery

10) Virtual memory is.........

A. an extremely large main memory
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

B. an extremely large secondary memory
C. an illusion of extremely large main memory
D. a type of memory used in super computers

11) Error handling and I/O interrupt handling are the functions of......
A. I/O device Handler
B. I/O traffic controller
C. I/O scheduler
D. I/O buffer

12) In a multithreaded environment..........

A. each thread is allocated with new memory from main memory
B. main thread terminates after the termination of child threads
C. every process can have only one thread
D. none of the above

13) The kernel keeps track of the state of each task by using a data structure called......
A. process control block
B. user control block
C. memory control block
D. hardware control block

14) A virtual device is a..........

A. dedicated for none purpose
B. shared device converted to a dedicated device
C. dedicated device converted to a shared device
D. shared device

15) CPU scheduling is the basis of ...........operating system.

A. batch
For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

B. real time
C. multiprogramming
D. monoprogramming

16) ......... is a high speed cache used to hold recently referenced page table entries a part of paged
virtual memory?
A. Translation looks a side buffer
B. Inverse page table
C. Segmented page table
D. Indexed page table

17) A technique that smoothes out peaks in I/O demand is........

A. spooling
B. buffering
C. swapping
D. paging

18) In kernel model, the operating system services such as process management, memory management
are provided by the kernel.
A. monolithic
B. micro
C. macro
D. Complex

19) A process is said to be in........... state if it was waiting for an event that will never occur.
A. safe
B. unsafe
C. starvation
D. dead lock

For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html

Solved Multiple Choice Questions of Operating System

20) Which of the following is an example of spooled device?
A. The terminal used to enter the input data for a program being executed
B. The secondary memory device in a virtual memory system
C. A line printer used to print the output of a number of jobs
D. None of the above

Answers:
1) B. frames
2) D. Process termination and Resource preemption
3) A. context switch
4) C. long term scheduler
5) B. Buffering
6) A. has the values one or zero
7) A. if no process faces starvation
8) B. buffer swapping
9) B. fault tolerance
10) C. an illusion of extremely large main memory
11) A. I/O device Handler
12) B. main thread terminates after the termination of child threads
13) A. process control block
14) B. shared device converted to a dedicated device
15) C. multiprogramming
16) A. Translation looks a side buffer
17) B. buffering
18) A. monolithic
19) D. dead lock
20) C. A line printer used to print the output of a number of jobs

For More Operating System MCQs Visit: www.siteforinfotech.com/p/operating-system-mcq-sets.html