11.4.1.2 Packet Tracer - Skills Integration Challenge
11.4.1.2 Packet Tracer - Skills Integration Challenge
11.4.1.2 Packet Tracer - Skills Integration Challenge
Topology
2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 1 of 4
Addressing Table
Device
IPv4 Address
Subnet Mask
IPv6 Address/Prefix
IPv6 Link-local
Interface
G0/0
G0/1
R1
G0/2
S0/0/1
S0/0/0
Central
S0/0/1
S1
VLAN 1
S2
VLAN 1
S3
VLAN 1
Staff
NIC
Sales
NIC
IT
NIC
Web
NIC
Default Gateway
N/A
2001:DB8:ACAD::1/64
FE80::1
N/A
N/A
2001:DB8:ACAD:1::1/64
FE80::1
N/A
N/A
2001:DB8:ACAD:2::1/64
FE80::1
N/A
172.16.1.2
255.255.255.252
N/A
2001:DB8:2::1/64
FE80::1
N/A
209.165.200.226
255.255.255.252
N/A
2001:DB8:1::1/64
FE80::2
N/A
172.16.1.1
255.255.255.252
N/A
2001:DB8:2::2/64
FE80::2
N/A
2001:DB8:ACAD::2/64
FE80::2
FE80::1
2001:DB8:ACAD:1::2/64
FE80::2
FE80::1
2001:DB8:ACAD:2::2/64
FE80::2
FE80::1
64.100.0.3
255.255.255.248
64.100.0.1
2001:DB8:CAFE::3/64
FE80::2
FE80::1
Scenario / Background
The router Central, ISP cluster and the Web server are completely configured. You have been tasked with
creating a new IPv4 addressing scheme that will accommodate 4 subnets using 192.168.0.0/24 network. The
IT department requires 25 hosts. The Sales department needs 50 hosts. The subnet for the rest of the staff
requires 100 hosts. A Guest subnet will be added in the future to accommodate 25 hosts. You are also tasked
with finishing the basic security settings and interface configurations on R1. Furthermore, you will configure
the SVI interface and basic security setting on switches S1, S2 and S3.
Requirements
IPv4 Addressing
2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 2 of 4
Sales: 50 hosts
IT: 25 hosts
PC Configurations
Configure the assigned IPv4 address, subnet mask, and default gateway settings on the Staff, Sales and
IT PCs using your addressing scheme.
Assign IPv6 unicast and link local addresses and default gateway to the Staff, Sales, and IT networks
according to the Addressing Table.
R1 Configurations
Create a banner that warns anyone accessing the device that unauthorized access is prohibited. Make
sure to include the word Warning in the banner.
Create a user Admin1 with a privilege level of 15 using the encrypted password for Admin1pa55.
Configure the console and VTY lines to log out after five minutes of inactivity.
Block anyone for three minutes who fails to log in after four attempts within a two-minute period.
Switch Configurations
Configure the SVI interface with the IPv4 address and subnet mask according your addressing scheme.
2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 3 of 4
Configure the console and VTY lines to log out after five minutes of inactivity.
Verify Connectivity
Using the web browser from Staff, Sales, and IT PCs, navigate to www.cisco.pka.
Using the web browser from Staff, Sales, and IT PCs, navigate to www.cisco6.pka.
2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 4 of 4