Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 46 views

    Flange & Bolt Selection

    Uploaded by

    Manzar Khan
    This document provides details on the selection and sizing of flanges, bolts, and gaskets for combined cycle power plant projects PP13 and PP14. It includes a flow chart outlining the process for sizing components based on the type of joint. An example calculation is shown for a flange to valve connection on a 900mm pipe. Component quantities are determined based on the number of bolt holes on the flange. Attachments include drawings, specifications, and calculations to support the example sizing.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Flange & Bolt Selection

    Uploaded by

    Manzar Khan
    46 views5 pages
    This document provides details on the selection and sizing of flanges, bolts, and gaskets for combined cycle power plant projects PP13 and PP14. It includes a flow chart outlining the process for sizing components based on the type of joint. An example calculation is shown for a flange to valve connection on a 900mm pipe. Component quantities are determined based on the number of bolt holes on the flange. Attachments include drawings, specifications, and calculations to support the example sizing.

    Original Description:

    free

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides details on the selection and sizing of flanges, bolts, and gaskets for combined cycle power plant projects PP13 and PP14. It includes a flow chart outlining the process for sizing components based on the type of joint. An example calculation is shown for a flange to valve connection on a 900mm pipe. Component quantities are determined based on the number of bolt holes on the flange. Attachments include drawings, specifications, and calculations to support the example sizing.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    46 views5 pages

    Flange & Bolt Selection

    Uploaded by

    Manzar Khan
    This document provides details on the selection and sizing of flanges, bolts, and gaskets for combined cycle power plant projects PP13 and PP14. It includes a flow chart outlining the process for sizing components based on the type of joint. An example calculation is shown for a flange to valve connection on a 900mm pipe. Component quantities are determined based on the number of bolt holes on the flange. Attachments include drawings, specifications, and calculations to support the example sizing.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 5

    Flange & Bolt

    selection
    PP13& 14 Combined Cycle Projects

    Done By: Ali Al-Juhani & Ali Al-Ali

    THE FLOW CHART


    Defined joint
    1) Flange to flange

    Isometric

    2) Flange to valve
    3) Flange to control
    valve

    Case
    1
    A

    Calculate/Define
    Calculate/Define
    number
    number
    of bolts, studs, nuts &
    of bolts, studs, nuts &
    gaskets
    gaskets
    for given size
    for given size
    Calculate/Find
    Calculate/Find
    quantity
    quantity
    by multiply number of
    by multiply number of

    Case
    1

    Case 3

    Case2

    Case
    4
    D

    Calculate/Define
    Calculate/Define
    number
    number
    of bolts, studs, nuts &
    of bolts, studs, nuts &
    gaskets
    gaskets
    for given size
    for given size
    Calculate/Find
    Calculate/Find
    quantity
    quantity
    by multiply number of
    by multiply number of
    See the equipment
    See the GA for each
    drawing
    to calculate
    valve to calculate the
    the
    length
    required
    length required

    Generate BOM/ MTO

    Size
    Bolt: Dia
    length
    Calculate
    stud length
    see attached
    A

    See Piping
    specification

    Description
    of Material

    See piping
    specification

    Quantity

    A+B+C+D

    Example1:

    In this example the selected system is the closed cooling water system:
    Isometric ID: PP13-20-PGB11-MDI-WP-001 (attached B)
    ASME B16.47 class 150 series a welding neck flanges
    The selected joint is flange to valve type.
    The nominal pipe size = 900 mm = 36 in.
    From ASME B16.47 class 150 series a welding neck flanges (attached
    File):
    Number of holes = 32, minimum flange thickness = 89mm.
    From line specification( attached file)
    Bolting: STUD BOLT W/2 HVY HEX NUTS, ASTM A193 GR B7 / ASTM A194 GR
    2H, DIA (INCH) X LEN (MM).
    Gasket: GASKET, FLAT RING, ASME B16.47 SERIES A, COMPRESSED NONASBESTOS, 1.6mm, CLASS 150, PER ASME B16.21, GARLOCK IFG 5500.
    Length calculation (attached A):
    L

    CSB

    = A+n

    A=2(tf + t + d) +G +F a
    tf = 89mm, t = 5mm, d =38.1mm, G = 3mm, F = 0, a = 0, n =1.5mm, A =
    273.2mm.
    So LCSB = 273.2+1.5 = 274.7mm +3mm each washer (attached file).
    LCSB =274.7 +6 = 280.7mm (See next page for details on drawing).

    Quantity
    For one joint: 32 stud bolt, 64 nuts, 1 gasket, 64 washers.

    Attached A:

    Attached B:

    You might also like