Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • Anchor Bolt Shock Calculation

    Uploaded by

    vikramjain66
    156 views1 page
    This document provides calculations for anchor bolt shock design for a glass balustrade at a train station concourse. It analyzes a single M12 anchor bolt with a design tension load of 17.9 kN. The calculations check that minimum spacing, edge distance, and embedment depth requirements are met. It also verifies the anchor bolt's steel resistance, pullout resistance, and concrete cone resistance are adequate to resist the design load with a safety factor of at least 1.0. The decisive design proof shows the ratio of design load to design resistance is 0.95, indicating the anchor bolt design is adequate.

    Original Description:

    Anchor Bolt Shock Calculation for Hilti

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document provides calculations for anchor bolt shock design for a glass balustrade at a train station concourse. It analyzes a single M12 anchor bolt with a design tension load of 17.9 kN. The calculations check that minimum spacing, edge distance, and embedment depth requirements are met. It also verifies the anchor bolt's steel resistance, pullout resistance, and concrete cone resistance are adequate to resist the design load with a safety factor of at least 1.0. The decisive design proof shows the ratio of design load to design resistance is 0.95, indicating the anchor bolt design is adequate.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    156 views1 page

    Anchor Bolt Shock Calculation

    Uploaded by

    vikramjain66
    This document provides calculations for anchor bolt shock design for a glass balustrade at a train station concourse. It analyzes a single M12 anchor bolt with a design tension load of 17.9 kN. The calculations check that minimum spacing, edge distance, and embedment depth requirements are met. It also verifies the anchor bolt's steel resistance, pullout resistance, and concrete cone resistance are adequate to resist the design load with a safety factor of at least 1.0. The decisive design proof shows the ratio of design load to design resistance is 0.95, indicating the anchor bolt design is adequate.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    Date:

    2/29/2016

    C925A - TPC Station


    GL3 GLASS BALUSTRADE AT CONCOURSE
    ANCHOR BOLT SHOCK CALCULATION
    Standard shock design form
    Applied loading is computed based on LTA civil defence shelter's requirements.
    The concrete is cracked
    Concrete strength, fck 15 N/mm2.
    Fixture is rigid enough to distribute applied tension load equally to all anchors in an anchor group.
    Anchor design is done for the most unfavourable anchor. This is the anchor with the most
    combination of loading and geometrical constaints (edge distance , spacing).

    unfavourable

    Input "0", if no Spacing or edge distance is required.


    FZA 22x100 M12 I A4

    Type of anchor
    h

    200

    s1

    210

    s2

    210

    s3

    c1

    c2

    Design tension action

    hmin
    (Sect 2)
    smin (Sect
    2)

    h / hmin

    200

    si / smin

    210

    cmin
    (Sect 2)

    100

    NGSd

    17.9

    ci / cmin
    Number of anchors in the group
    acting in tension

    1.00

    1.0

    1.00

    1.0

    1.00

    1.0

    0.00

    1.0

    0.00

    1.0

    0.00

    1.0

    NSd

    17.90

    VSd

    2.58

    RSd

    18.08

    Steel resistance

    NRd,s

    29.50

    Sect 2

    Pullout resistance

    Rclass

    27.10

    Sect 2

    fb,N

    1.10

    NRd,p

    27.10

    N0Rd,c

    24.00

    Sect 2

    fs1

    0.85

    1.0

    fs2

    0.85

    1.0

    fs3

    0.00

    1.0

    fc1

    0.00

    1.0

    fc2

    0.00

    1.0

    NRd,c
    RRd

    19.00

    NSd =
    Design shear action

    VGSd

    2.58

    Design resultant action on single anchor

    Number of anchors in the group


    acting in shear

    VSd =

    Shear action acting on single anchor

    Calculation of resistance

    Concrete strength

    fck

    30

    fb,N =

    NRd,p = Rclass
    Concrete cone resistance in cracked concrete
    s1

    210

    s2

    210

    s3

    c1

    c2

    scr,N
    (Sect 2)
    ccr,N (Sect
    2)

    300

    150

    fsi = +
    fci =

    x 0.5

    N0Rd,c x fb,N x fsi

    NRd,c =
    x fci
    RRd = min (NRd,s ; NRd,p ; NRd,c)

    Design resultant resistance


    19.00
    Decisive design proof
    RSd / RRd
    0.95
    * The Calculation results are proposals only; it should be final checked and approved by the engineers
    responsible for the project.

    1.0

    You might also like