Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 286 views

    Base Plate Design Metric Units

    Uploaded by

    D SRINIVAS
    This document provides sample calculations for designing a base plate for a column. It includes inputs such as column dimensions, forces, and material properties. The calculations solve three equations to determine the axial force in the hold down bolts, the active area under the base plate, and the maximum pressure under the base plate. The outputs include the base plate size, thickness, and maximum tension in the bolts. Standard references such as Eurocodes are also listed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Base Plate Design Metric Units

    Uploaded by

    D SRINIVAS
    286 views5 pages
    This document provides sample calculations for designing a base plate for a column. It includes inputs such as column dimensions, forces, and material properties. The calculations solve three equations to determine the axial force in the hold down bolts, the active area under the base plate, and the maximum pressure under the base plate. The outputs include the base plate size, thickness, and maximum tension in the bolts. Standard references such as Eurocodes are also listed.

    Original Description:

    Base Plate Design

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides sample calculations for designing a base plate for a column. It includes inputs such as column dimensions, forces, and material properties. The calculations solve three equations to determine the axial force in the hold down bolts, the active area under the base plate, and the maximum pressure under the base plate. The outputs include the base plate size, thickness, and maximum tension in the bolts. Standard references such as Eurocodes are also listed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    286 views5 pages

    Base Plate Design Metric Units

    Uploaded by

    D SRINIVAS
    This document provides sample calculations for designing a base plate for a column. It includes inputs such as column dimensions, forces, and material properties. The calculations solve three equations to determine the axial force in the hold down bolts, the active area under the base plate, and the maximum pressure under the base plate. The outputs include the base plate size, thickness, and maximum tension in the bolts. Standard references such as Eurocodes are also listed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    2/1/2016

    BasePlateDesignMetricUnits

    Evo Design structural design

    CALCULATIONSHEET

    ProjectTitle:

    Baseplatecalculationinteractiveonlinespreadsheet

    Subject/Feature:

    onlinestructuraldesign.com

    SAMPLECALCULATION

    Calc.By

    MN

    CheckedBy

    Date

    perEN199211,EN199311andEN199318

    Output

    Baseplatesizeinplan
    Columnbaseforces

    Baseplatethickness
    Max.pressureunderbaseplate

    Materials(steel,concrete,bolts)

    Profiledimensions

    CN

    16.04.2014

    Max.tensioninbolts/boltverification

    Date

    Rev.

    16.04.2014

    Input

    ColumnBasePlateDesignOnlineCalculationReport

    ColumnBasePlateDesignOnlineCalculationReport

    001BASEPLATE
    ProjectNo.

    CalculationNo.

    HEA340

    h=

    304.8

    mm

    profileheight

    b=

    304.8

    mm

    profilewidth

    H=

    600

    mm

    B=

    600

    mm

    Baseplatethicknessisdeterminedinthecalculation

    190
    s=
    mm
    criticalsectionlocation

    (usuallyinthemiddleoftheflange)

    mm

    perEN199318

    BasePlateDimensions

    Boltlocationsonplate
    241.3

    f=
    nB=

    numberofholddownbolts(boltsintension)
    =
    20
    mm
    boltdiameter

    (parametersthatcannotbemodifiedinthedemoversion)
    Materials

    Steelboltcharacteristics

    4.6
    Boltclass

    Boldyieldstrength
    fyb=

    240

    Partialfactorforsteelbolts
    M2=

    1.25

    Section3Table3.1

    N/mm2

    Section2Table2.1
    partialsafetyfactorsrecommendedbytheEurocode;

    fyd=fy/M2

    Boltdesignstrength
    fydb=

    192.0

    N/mm2

    Steelbaseplatecharacteristics
    S235
    Steelgrade

    Steelyieldstrength

    fy=

    235

    N/mm2

    References:

    1.00

    perEN199318

    Numericalvaluesforsafetyfactorsmaybedefined

    intheNationalAnnex

    forthicknessunder40mm

    215

    M0=

    TheNationalAnnexmayexcludecertainboltclasses.

    N/mm2
    forthicknessbetween40mmand80mm

    Partialfactorforsteelelements(inbending)

    fy=

    boltclassesrecommendedbytheEurocode;

    http://www.onlinestructuraldesign.com/preview/Baseplate_metric/Baseplate_metric.htm

    Section6.1(1)andNote2B

    perEN199311

    valuerecommendedbytheEurocode;valuetobe
    usedcanbefoundintheEurocodeNationalAnnex

    1/5

    2/1/2016

    BasePlateDesignMetricUnits

    DesignofWeldedStructuresO.W.Blodgett(JamesF.LincolnArcWeldingFoundation)
    EN199211:2004Eurocode2:DesignofconcretestructuresPart11:Generalrulesandrulesforbuildings
    EN199311:2005Eurocode3:DesignofsteelstructuresPart11:Generalrulesandrulesforbuildings

    EN199318:2005Eurocode3:DesignofsteelstructuresPart18:Designofjoints

    Evo Design structural design

    001BASEPLATE

    CALCULATIONSHEET

    ProjectTitle:

    Steelmodulusofelasticity
    Es=

    210000

    Concretecharacteristics
    C12/15
    Concreteclass

    perEN199311

    N/mm2

    Section3.2.6(1)

    perEN199211:2004

    Section3Table3.1

    perEN199211:2004
    Section2Table2.1N

    1
    cc*fck/c

    Aggregates=

    27 GPafor

    Ecm=

    16.04.2014

    valuesforPersistent&Transientdesignsituations

    Coefficienttakingaccountoflongtermeffects

    8.00 MPa

    onthecompressivestrengthandofunfavourable

    recommendedbytheEurocode;valuestobeused
    maybefoundintheEurocodeNationalAnnexes

    perEN199211:2004
    Section3.1.6&Formula3.15

    effectsresultingfromthewaytheloadisapplied
    valuemaybefoundintheECNationalAnnex

    C12/15

    perEN199211:2004
    Section3.1.3Table3.1

    Section3.1.3(2)

    ValuesinTable3.1aregivenforquartziteaggregates

    Valuesforlimestoneandsandstonearereduced

    by10%and30%respectively.Forbasaltaggregates

    pairofcolumnbaseforces.MxandMyarenot

    18.9 GPaforconcretewithsandstoneaggregates

    CN

    concreteclass

    18900 N/mm2

    Ecm=

    sandstone

    Concretemodulusofelasticity

    Date

    Ckd.By

    Rev.

    16.04.2014

    1.5

    Ecm=

    MN

    Designcompressiveconcretestrength

    fcd=

    Date

    12 MPa
    concretecharacteristiccylinderstrength

    Partialfactorforconcreteforultimatelimitstates

    cc=

    Calc.By

    fck=

    c=

    SAMPLECALCULATION

    onlinestructuraldesign.com

    ColumnBasePlateDesignOnlineCalculationReport

    Subject

    ProjectNo.

    Baseplatecalculationinteractiveonlinespreadsheet

    CalculationNo.

    Columnbaseforces

    N=

    900 kN

    M=

    200 kN*m

    axialforce

    bendingmoment

    222.2 mm
    M/F=
    100.00
    mm
    eccentricity
    >H/6=>Baseplatewithlargeeccentricity

    thevalueshouldbeincreasedby20%

    consideredsimultaneous.

    e=

    H/6=

    References:

    DesignofWeldedStructuresO.W.Blodgett(JamesF.LincolnArcWeldingFoundation)
    EN199211:2004Eurocode2:DesignofconcretestructuresPart11:Generalrulesandrulesforbuildings
    EN199311:2005Eurocode3:DesignofsteelstructuresPart11:Generalrulesandrulesforbuildings
    EN199318:2005Eurocode3:DesignofsteelstructuresPart18:Designofjoints

    http://www.onlinestructuraldesign.com/preview/Baseplate_metric/Baseplate_metric.htm

    2/5

    2/1/2016

    BasePlateDesignMetricUnits

    Evo Design structural design

    001BASEPLATE

    CALCULATIONSHEET

    ProjectTitle:

    Fb,Y,c
    Threeequations,threeunknowns:
    (Axialforceinsteelholddownbolts,activearea
    underbaseplate,aximumpressureunderbaseplate)

    1.Forcesequilibrium

    Calc.By

    MN

    Ckd.By

    Date

    Rev.

    16.04.2014

    SAMPLECALCULATION

    onlinestructuraldesign.com

    ColumnBasePlateDesignOnlineCalculationReport

    Subject

    ProjectNo.

    Baseplatecalculationinteractiveonlinespreadsheet

    CalculationNo.

    Date

    CN

    16.04.2014

    Y*c/2FbN=0

    Fb+N=Y*c*B/2

    (1)

    Fb*f+(Fb+N)*(H/2Y/3)N*e=0

    Fb=N*(H/2Y/3e)/(H/2Y/3+f)

    (2a)

    (2)

    2.Bendingmomentequilibrium

    N=Fb*(H/2Y/3e)/(H/2Y/3+f)

    3.Representingtheelasticbehaviouroftheconcrete
    supportandthesteelholddownbolt:

    a/b=

    b/c=

    (b/Es)/(c/Ec)

    since

    Es=

    b/s

    modulusofelasticityofsteelbolt

    Ec=

    c/c

    modulusofelasticityofconcrete

    nb=

    numberofsteelholddownbolts

    Ab=

    b=

    Fb/Ab

    n=

    Es/Ec=

    (N/Ab)/(c*n)=
    a/b=

    Fromsimilartriangles
    a/b=
    (H/2Y+f)/Y

    =>

    =>

    From(1),(2)and(3)

    2* *2/4=

    N/(Ab*c*n)=

    628.3 mm2

    areaofsteelholddownbolts

    11.11

    modularratioofelasticity,steeltoconcrete

    N/(Ab*c*n)

    (H/2Y+f)/Y

    c=

    Fb*Y/(Ab*n*(H/2Y+f))

    =>

    =>

    (3)

    Y3+3*(eH/2)*Y2+[(6*n*Ab)/B]*(f+e)*Y[(6*n*Ab)/B]*(H/2+f)*(f+e)=0

    Y3+K1*Y2+K2*Y+K3=0
    where

    K1=

    3*(eH/2)=

    K2=

    [(6*n*Ab)/B]*(f+e)=

    K3=

    K2*(H/2+f)=

    or

    (Fb*Y2*B)/[2*Ab*n*(H/2Y+f)]

    Fb*(H/2Y/3e)/(H/2Y/3+b)+Fb=

    SolveforY:

    233

    32360

    17516444

    http://www.onlinestructuraldesign.com/preview/Baseplate_metric/Baseplate_metric.htm

    3/5

    2/1/2016

    BasePlateDesignMetricUnits

    310.5 mm

    Y=

    References:

    DesignofWeldedStructuresO.W.Blodgett(JamesF.LincolnArcWeldingFoundation)
    EN199211:2004Eurocode2:DesignofconcretestructuresPart11:Generalrulesandrulesforbuildings
    EN199311:2005Eurocode3:DesignofsteelstructuresPart11:Generalrulesandrulesforbuildings

    EN199318:2005Eurocode3:DesignofsteelstructuresPart18:Designofjoints

    Evo Design structural design

    001BASEPLATE

    CALCULATIONSHEET

    ProjectTitle:

    Date

    per(2a)holddownboltsmax.tension(inallbolts)

    holddownboltmax.tensionin1bolt

    52.88 kN(in

    2bolts)
    84.16 N/mm2

    <

    c=

    10.19 MPa

    fydb

    fcd
    fcd=
    >

    redesignbaseplatelengthand/orwidth
    stressunderbaseplateislargerthantheconcretecompressivecapacity

    DesignoftheBasePlateThickness
    Criticalsectionlocation
    190
    s=
    mm

    Stressatthecriticalsectionlocation
    c *(Ys)/Y=

    Designcriticalmomentatcriticalsection

    3.95

    OK,bolteffectivestressissmallerthanboltdesignstress

    per(3)

    8.00 MPa

    effectivemax.pressureunderbaseplateiscompared
    withtheconcretedesigncompressivestrength
    ifthemax.pressureishigherthantheconcrete

    MPa

    87.85 kN*m

    (4)

    perEN199311
    Section6.2.5(2)Formula6.13

    82.10 kN*m

    (c*Y/2)*(sY/3)*B=

    MC,Rd=Mpl,rd= (Wpl*fy)/M0

    Bendingplasticdesignresistance

    Plasticsectionmodulusofrectangularsections

    (5)

    2
    from(4)and(5) =>[fy*(B*tpl )/4]/M0>MEd.plate

    MEd.plate=
    87.85 kN*m

    MEd.plate=

    (tpl=baseplatethickness)

    16.04.2014

    MEd.plate=

    B*tpl2/4

    CN

    [(sc*s/2)*(s/3)+(c*s/2)*(s*2/3)]*B=

    192.0 N/mm2

    F1.bolt/(*2/4)=

    Ckd.By

    16.04.2014

    Wpl=

    MN

    Rev.

    26.44 kN

    Date

    F1.bolt=Fb/ 2=

    Calc.By

    Fb=

    sc=

    SAMPLECALCULATION

    onlinestructuraldesign.com

    ColumnBasePlateDesignOnlineCalculationReport

    Subject

    ProjectNo.

    Baseplatecalculationinteractiveonlinespreadsheet

    CalculationNo.

    Designresistanceforbendingaboutone
    principalaxisforclass1or2crosssections

    =>tpl>sqrt[4*MEd.plate*M0/(B*fy)]

    =>tpl>

    (withfy=

    52.19 mm

    215 N/mm2)

    References:

    DesignofWeldedStructuresO.W.Blodgett(JamesF.LincolnArcWeldingFoundation)
    EN199211:2004Eurocode2:DesignofconcretestructuresPart11:Generalrulesandrulesforbuildings
    EN199311:2005Eurocode3:DesignofsteelstructuresPart11:Generalrulesandrulesforbuildings
    http://www.onlinestructuraldesign.com/preview/Baseplate_metric/Baseplate_metric.htm

    4/5

    2/1/2016

    BasePlateDesignMetricUnits

    EN199318:2005Eurocode3:DesignofsteelstructuresPart18:Designofjoints

    http://www.onlinestructuraldesign.com/preview/Baseplate_metric/Baseplate_metric.htm

    5/5

    You might also like