Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Aquagel 1 PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

AQUAGEL

Viscosifier
Product
Description

Applications /
Functions

Advantages

Typical
Properties

Recommended
Treatment

Product Data Sheet

AQUAGEL visocifier is a treated premium grade Bentonite. AQUAGEL visocifier is finely ground to aid
in dispersion and meets API specifications 13A, section 9 requirements. This product can provide viscosity
and gelling characteristics to most water-based drilling fluids and also helps reduce fluid loss and filtrate
seepage into the formation.

Viscosify anionic water-based drilling fluids


Can reduce water seepage or filtration into permeable formations
Can form a thin filter cake with low permeability
Can promote hole stability in poorly consolidated formations

Helps provide suspension for fluids weighted with barite or hematite


Helps improve hole-cleaning capacity of drilling fluids
Meets or exceeds API manufacturing standards (Section 9, Bentonite)
Is environmentally responsible
Can be added directly to fresh water or fresh water drilling fluids

Appearance
Bulk density, compacted
Bulk density, uncompacted
Bulk density, compacted
Bulk density, uncompacted

Variable-colored powder
73 lb/ft
50 lb/ft
1169 kg/m
800 kg/m

1. Add AQUAGEL viscosifier in concentrations of 0-25 lb/bbl (0-70 kg/m) to any active system.
2. Mix slowly through a jet mixer or sift slowly into the vortex of a high-speed stirrer.
Note: For optimum yield, AQUAGEL viscosifier should be prehydrated in fresh water when the fluid's
chlorides exceed 8000 ppm.

Packaging

AQUAGEL viscosifier is available in 50-lb (22.7-kg) and 100-lb (45.4-kg) sacks.

www.halliburton.com/baroid
Because the conditions of use of this product are beyond the seller's control, the product is sold without warranty either express or implied and upon condition that purchaser make its own test to determine the suitability for
purchaser's application. Purchaser assumes all risk of use and handling of this product. This product will be replaced if defective in manufacture or packaging or if damaged. Except for such replacement, seller is not liable
for any damages caused by this product or its use. The statements and recommendations made herein are believed to be accurate. No guarantee of their accuracy is made, however.

AQUAGEL is a registered trademark of Halliburton 2010 Halliburton All Rights Reserved


3/24/2010

You might also like