This document is a material safety data sheet for the product CFR-3. It provides information on the product identification, composition, hazards, first aid measures, fire fighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, transport information, regulatory information, and other information. CFR-3 is a cement friction reducer chemical that contains sodium formate and sulfonic acid salt and may cause eye and skin irritation. Proper protective equipment should be worn when handling.
This document is a material safety data sheet for the product CFR-3. It provides information on the product identification, composition, hazards, first aid measures, fire fighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, transport information, regulatory information, and other information. CFR-3 is a cement friction reducer chemical that contains sodium formate and sulfonic acid salt and may cause eye and skin irritation. Proper protective equipment should be worn when handling.
This document is a material safety data sheet for the product CFR-3. It provides information on the product identification, composition, hazards, first aid measures, fire fighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, transport information, regulatory information, and other information. CFR-3 is a cement friction reducer chemical that contains sodium formate and sulfonic acid salt and may cause eye and skin irritation. Proper protective equipment should be worn when handling.
This document is a material safety data sheet for the product CFR-3. It provides information on the product identification, composition, hazards, first aid measures, fire fighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, transport information, regulatory information, and other information. CFR-3 is a cement friction reducer chemical that contains sodium formate and sulfonic acid salt and may cause eye and skin irritation. Proper protective equipment should be worn when handling.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 6
MATERIAL SAFETY DATA SHEET
Product Trade Name:
Revision Date:
CFR-3 03-Jan-2008
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Statement of Hazardous Nature Manufacturer/Supplier Not classified as hazardous according to criteria of WorkSafe Halliburton Australia Pty. Ltd. 53-55 Bannister Road Canning Vale WA 6155 Australia ACN Number: 009 000 775 Telephone Number: 61 (08) 9455 8300 Fax Number: 61 (08) 9455 5300 Product Emergency Telephone Australia: 08-64244950 Papua New Guinea: 05 1 281 575 5000 NewZealand: 06-7559274 Fire, Police & Ambulance - Emergency Telephone Australia: 000 Papua New Guinea: 000 New Zealand: 111 Identification of Substances or Preparation Product Trade Name: Synonyms: Chemical Family: UN Number: Dangerous Goods Class: Subsidiary Risk: Hazchem Code: Poisons Schedule: Application: Prepared By CFR-3 None Organosulfur None None None None None Cement Friction Reducer Chemical Compliance Telephone: 1-580-251-4335 e-mail: fdunexchem@halliburton.com
2. COMPOSITION/INFORMATION ON INGREDIENTS SUBSTANCE Sodium formate Sulfonic acid salt CAS Number 141-53-7 PERCENT 5 - 10% 60 - 100% CFR-3 Page 1 of 6
Australia NOHSC Not applicable Not applicable
ACGIH TLV-TWA Not applicable Not applicable
Total to 100%
3. HAZARDS IDENTIFICATION Hazard Overview Hazard Ratings Flammability: Toxicity: Body Contact: Reactivity: Chronic: 1 0 0 0 0 May cause eye and skin irritation. Airborne dust may be explosive.
Inhalation Skin Eyes Ingestion Notes to Physician If inhaled, remove from area to fresh air. Get medical attention if respiratory irritation develops or if breathing becomes difficult. Wash with soap and water. Get medical attention if irritation persists. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical attention if irritation persists. Do not induce vomiting. Slowly dilute with 1-2 glasses of water or milk and seek medical attention. Never give anything by mouth to an unconscious person. Not Applicable
5. FIRE FIGHTING MEASURES
Suitable Extinguishing Media Unsuitable Extinguishing Media Special Exposure Hazards Water fog, carbon dioxide, foam, dry chemical. None known. Decomposition in fire may produce toxic gases. Organic dust in the presence of an ignition source can be explosive in high concentrations. Good housekeeping practices are required to minimize this potential.
Special Protective Equipment for Full protective clothing and approved self-contained breathing apparatus required for fire fighting personnel. Fire-Fighters
6. ACCIDENTAL RELEASE MEASURES
Personal Precautionary Measures Use appropriate protective equipment. Avoid creating and breathing dust. Environmental Precautionary Measures Procedure for Cleaning / Absorption None known. Scoop up and remove.
7. HANDLING AND STORAGE
Handling Precautions Storage Information Avoid creating or inhaling dust. Slippery when wet. Store away from oxidizers. Store in a cool, dry location. CFR-3 Page 2 of 6
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Controls Respiratory Protection Use in a well ventilated area. Not normally needed. But if significant exposures are possible then the following respirator is recommended: Dust/mist respirator. (95%) Normal work gloves. Normal work coveralls. Wear safety glasses or goggles to protect against exposure. None known.
Hand Protection Skin Protection Eye Protection Other Precautions
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Color: Odor: pH: Specific Gravity @ 20 C (Water=1): Density @ 20 C (kg/l): Bulk Density @ 20 C (kg/m3): Boiling Point/Range (C): Freezing Point/Range (C): Pour Point/Range (C): Flash Point/Range (C): Flash Point Method: Autoignition Temperature (C): Flammability Limits in Air - Lower (g/m3): Flammability Limits in Air - Lower (%): Flammability Limits in Air - Upper (g/m3): Flammability Limits in Air - Upper (%): Vapor Pressure @ 20 C (mmHg): Vapor Density (Air=1): Percent Volatiles: Evaporation Rate (Butyl Acetate=1): Solubility in Water (g/100ml): Solubility in Solvents (g/100ml): VOCs (g/l): Viscosity, Dynamic @ 20 C (centipoise): Viscosity, Kinematic @ 20 C (centistrokes): Partition Coefficient/n-Octanol/Water: Molecular Weight (g/mole): Decomposition Temperature (C): Solid Red brown Musty 7-8 1.17 Not Determined 600 Not Determined Not Determined Not Determined Not Determined Not Determined Not Determined Not Determined Not Determined Not Determined Not Determined Not Determined Not Determined 0 Not Determined Soluble Not Determined Not Determined Not Determined Not Determined Not Determined > 600 Not Determined
10. STABILITY AND REACTIVITY
Stability Data: Hazardous Polymerization: Conditions to Avoid Incompatibility (Materials to Avoid) Stable Will Not Occur None anticipated Strong oxidizers.
Oxides of sulfur. Carbon monoxide and carbon dioxide. Not Applicable
11. TOXICOLOGICAL INFORMATION
Principle Route of Exposure Inhalation Skin Contact Eye Contact Ingestion Aggravated Medical Conditions Eye or skin contact, inhalation. May cause respiratory irritation. Prolonged or repeated contact may cause slight skin irritation. May cause mild eye irritation. None known None known.
Chronic Effects/Carcinogenicity No data available to indicate product or components present at greater than 1% are chronic health hazards. Other Information Toxicity Tests Oral Toxicity: Dermal Toxicity: Inhalation Toxicity: Primary Irritation Effect: Carcinogenicity Genotoxicity: Reproductive / Developmental Toxicity: Not determined Not determined Not determined Not determined Not determined EC10: >32000 mg/l (Pseudomas Putida) Not determined None known.
12. ECOLOGICAL INFORMATION
Mobility (Water/Soil/Air) Persistence/Degradability Bio-accumulation Not determined Slowly biodegradable Not Determined
Ecotoxicological Information TLM48: 7478 mg/l (Orange-Red Killfish) Acute Fish Toxicity: Acute Crustaceans Toxicity: TLM96: > 3300 ppm (Crangon crangon) Not determined Acute Algae Toxicity: Chemical Fate Information Other Information Not determined Not applicable
CFR-3 Page 4 of 6
13. DISPOSAL CONSIDERATIONS
Disposal Method Contaminated Packaging Bury in a licensed landfill according to federal, state, and local regulations. Follow all applicable national or local regulations.
14. TRANSPORT INFORMATION Land Transportation
ADR Not restricted
Air Transportation ICAO/IATA Not restricted
Sea Transportation IMDG Not restricted
Other Shipping Information
EPG: IERG: Labels: None None None
15. REGULATORY INFORMATION
Chemical Inventories Australian AICS Inventory US TSCA Inventory EINECS Inventory Classification Risk Phrases Safety Phrases Not Determined All components listed on inventory. This product, and all its components, complies with EINECS Not Classified None None
16. OTHER INFORMATION
The following sections have been revised since the last issue of this MSDS Not applicable
Contact Australian Poisons Information Centre 24 Hour Service: - 13 11 26 Police or Fire Brigade: - 000 (exchange): New Zealand Poisons Information System Deunedin: -(03) 479 1200 (Normal Hours) -(03) 474 0999 (Emergency)
- 1100
CFR-3 Page 5 of 6
Additional Information
For additional information on the use of this product, contact your local Halliburton representative. For questions about the Material Safety Data Sheet for this or other Halliburton products, contact Chemical Compliance at 1-580-251-4335.
Disclaimer Statement
This information is furnished without warranty, expressed or implied, as to accuracy or completeness. The information is obtained from various sources including the manufacturer and other third party sources. The information may not be valid under all conditions nor if this material is used in combination with other materials or in any process. Final determination of suitability of any material is the sole responsibility of the user. ***END OF MSDS***
