Unitech Cable Trunking

METALLIC CABLE
MANAGEMENT SYSTEMS
CABLE TRUNKINGS
15
9/21
SA0
Specialized Factory for Steel Products

Sigma Factory for Steel Products
for Building & Construction Materials
METALLIC CABLE MANAGEMENT SYSTEMS

CABLE TRUNKINGS
METALLIC CABLE MANAGEMENT SYSTEMS

Uni Metal Cable Trunkings
Description
SFSP manufactures a full range of Uni Metal Cable Trunkings: Single and multi compartments with accessories
in compliance to the international standards of fabrication.
Uni Metal provides a wide range of products capable of providing the characteristics which respond to the proposed
application, along with quality of assembly, speed of installation, and cost-saving cable trunkings.
TYPES
Single Compartment SCT
Double Compartment DCT
Triple Compartment
TCT
AVAILABLE LENGTHS
- 2440 mm
- 3000 mm
MATERIAL THICKNESSES
0.90, 1.20, 1.50 & 2.00 mm
MATERIALS & FINISHES

Hot rolled steel S235JR as per EN 10025 / ASTM A-1011 CS Type B (formerly ASTM A569 or ASTM A570)
Cold rolled steel DC01 as per EN 10130 / ASTM A1008 CS Type B ( formerly ASTM A-366)
and then:
- Hot- dip galvanized as per BS EN 1461 (formerly BS 729 ) / ASTM A123 or
- Electro plated as per EN 12329 / ASTM B633 (Electrodeposited coatings of zinc on iron and steel)
Pre- galvanized steel DX51 D +Z as per EN 10346 ( G180 and G275 is available upon special request) which supersedes EN 10327
which is a replacement of EN 10142 which in turn supersedes BS 2989 / ASTM A653M zinc coated (hot-dip galvanized) iron and
steel CS (commercial) or SS (structural) quality G60 and G90 is available upon special request (formerly ASTM A527M) / ASTM A924
(coating) (formerly A525)
Stainless steel 1.4301 as per EN 10088-2 (formerly BS 1449 Part 2 / ASTM A240M, Grade AISI 304)
REFERENCES (Cable Management Systems):

ANSI /NFPA 70 - National Electrical Code
NEMA VE 1-2009 - Metal Cable Trays Systems
NEMA VE 2-2006 - Cable Tray Installation Guidelines
IEC 61537 International Electrotechnical Commission

SASO IEC (61537/2007) Saudi Standard
CSA C22.2 No. 126. 1-02 - Metal Cable Tray Systems
ISO CERTIFICATES
Established in 1989, SFSP has long been recognized as a quality manufacturing company.
In 2001, SFSP was certified by ISO management system and acquired the ISO 9002.
In 2006, SFSP was also certified by ISO and received the ISO 9001:2000.
In 2008, SFSP was also certified by ISO and received the ISO 9001:2008.
SINGLE COMPARTMENT CABLE TRUNKING SCT
Thicknesses: 0.9,1.2, 1.5, 2.0 mm
Available lengths: 2440 mm / 3000 mm
50x50 mm
75x50 mm
100x50 mm
150x50 mm
75x75 mm
100x75 mm
150x75 mm
100x100 mm
150x100 mm
150x150 mm
DOUBLE COMPARTMENT CABLE TRUNKING DCT

Thicknesses: 0.9,1.2, 1.5, 2.0 mm
Dimensions:
50x50 mm
75x50 mm
100x50 mm
150x50 mm
75x75 mm
100x75 mm
150x75 mm
100x100 mm
150x100 mm
150x150 mm
CABLE TRUNKINGS
Dimensions:
TEMS
KINGS
TRIPLE COMPARTMENT CABLE TRUNKING TCT
Thicknesses: 0.9,1.2, 1.5, 2.0 mm
Dimensions:
50x50 mm
75x50 mm
100x50 mm
150x50 mm
75x75 mm
100x75 mm
150x75 mm
100x100 mm
150x100 mm
150x150 mm
FITTINGS
Bend 45 Top Lid
Bend 45 Inside Lid
Bend 45 Outside Lid
TL45
IL45
OL45
Bend 90 Top Lid
Bend 90 Inside Lid
Bend 90 Outside Lid
TL90
IL90
OL90
Z
Z
TEE Bend Top Lid
TEE Bend Inside Lid
TEE Bend Outside Lid
TBTL
TBIL
TBOL
21.0 Y
41.0
Z
41.0
Intersection
Reducer
IF
AR
Hanger
Z
41.0
ASH
22.0
22.0
Y
7.0 YY
21.0
Cable Retaining Strap
Z
Straight & Flanged Couplers
ACR
ASC
Suspension
Bracket
41.0
ASB
Z
41.0
Z
41.0
21.0 Y
7.0
41.0
41.0
41.
Z
21.0 Y
21.0 Y Y
41.0
7.0
41.0
CABLE TRUNKINGS SUPPORT SYSTEMS

Z
41.0
Z
41.0
Z
41.0
CABLE TRUNKINGS
Part No
22.0
Channel Dimensions
Thickness
Height H
Width W
CCH - 220/221
21.0 mm
41.0 mm
1.5 mm
CCH - 240/241
41.0 mm
41.0 mm
1.5 mm
CCH - 320/321
21.0 mm
41.0 mm
2.0 mm
CCH - 340/341
41.0 mm
41.0 mm
2.0 mm
CCH - 420/421
21.0 mm
41.0 mm
2.5 mm
CCH - 440/441
41.0 mm
41.0 mm
2.5 mm
7.0
41.0
41.0
42.0
41.0
41.0
22.0
22.0
22.0
50
22.0
22.0
13
7.0
7.0
7.0
30
41
42.0
Toothed Channel
82.0
Cantilever Arm Bracket
82.0
82.0
13
50
30
Cantilever Arm Bracket B2B
41.0
41.0
Standard Length: 3000 mm (Custom lengths are available upon request)

Materials: Mild Steel, Aluzink Steel, Stainless Steel
Finishes: Pre-Galvanized, Hot-Dip Galvanized.
41.0
41.0
41.0
3
50
13
50
30
50
13
30
13
30
82.0
41.0
41.0
41.0
7.0
7.0
42.0
41.0
7.0
7.0
7.0
41.0
7.0
41
82.0
22.0
22.0
22.0
41.0
42.0
41.0
Z
7.0
41.0
22.0
41.0
41.0
41.0
22.0
41.0
7.0
21.0
41.0
7.0
Y
22
22.0
21.0
Y
41.0 21.0
41.0
22.0
7.0
21.0
42.0
METAL FRAMING CHANNELS

Selection Chart
22
7.0
21.0 Y
22.0
Z
22.0
22.0
www.unitech-ikk.com
www.unimetal-ikk.com
www.sfsp-ikk.com
KINGDOM OF SAUDI ARABIA
UNITED ARAB EMIRATES
LEBANON
Jeddah
Tel : +966 2 627 8222
Fax: +966 2 627 8722
unitech.ksa@ikkgroup.com
Qassim
Tel : +966 6 382 3946
Fax: +966 6 385 2186
Dubai - DIP
Tel : +971 4 884 7275
Fax: +971 4 884 7278
unitech.uae@ikkgroup.com
Beirut
Tel : +961 1 858 277
Fax: +961 1 858 276
unitech.lebanon@ikkgroup.com
Jeddah - Ghurab Showroom

Tel : +966 2 667 2000
Fax: +966 2 661 4306
Qassim Showroom
Tel : +966 6 385 2598
Fax: +966 6 382 6684
Dubai - Al Rashidiyah
Tel : +971 4 285 6031
Fax: +971 4 286 2941
JORDAN
Mak kah, Taif

Tel : +966 2 597 2675
Fax: +966 2 597 0588
Tabuk
Tel : +966 4 424 3386
Fax: +966 4 423 5203
Sharjah
Tel : +971 6 534 4092
Fax: +971 6 534 8949
Mad inah
Tel : +966 4 864 9111
Fax: +966 4 864 9222
Skakah, Qurayyat
Tel : +966 4 626 3904
Fax: +966 4 626 3905
Abu Dhabi - Musaffah

Tel : +971 2 551 2334
Fax: +971 2 551 2335
Yanbu
Tel : +966 4 390 1499
Fax: +966 4 322 7101
Hail
Tel : +966 6 543 3931
Fax: +966 6 543 3935
EGYPT
Khamis Mushayt
Tel : +966 7 237 5929
Fax: +966 7 237 8783
Hafar Al Batin
Tel : +966 3 721 5915
Fax: +966 3 721 5915
Baha
Tel : +966 7 237 5929
Fax: +966 7 237 8783
Dammam
Tel : +966 3 859 0097
Fax: +966 3 857 8177
Najran
Tel : +966 7 321 4038
Fax: +966 7 321 4035
Dammam - Showroom
Tel : +966 3 834 9300
Fax: +966 3 834 9457
Gizan
Tel : +966 7 321 6660
Fax: +966 7 321 0665
Hufuf
Tel : +966 3 586 9732
Fax: +966 3 584 5966
Riyadh
Tel : +966 1 454 9282
Fax: +966 1 456 6627
Jubail
Tel : +966 3 361 4390
Fax: +966 3 361 4499
Riyadh - Rail St.Office

Tel : +966 1 810 5926
Fax: +966 1 456 6627
DESIGN OFFICE
Germany
Stuttgart
Tel : +49 711 6868 7222
Fax: +49 711 6868 7223
unitech.germany@ikkgroup.com
Amman
Tel : +962 6 556 3030
Fax: +962 6 554 7911
unitech.jordan@ikkgroup.com
LIBYA
Tripoli
Tel : +218 21 717 0264
Fax: +218 21 477 1612
unitech.libya@ikkgroup.com
OMAN
Cairo
Tel : +20 2 3346 8566
Fax: +20 2 3346 8567
unitech.egypt@ikkgroup.com
Cairo - Gamhouriyah St.
Tel : +20 2 2787 2152
Fax: +20 2 2593 1053
Cairo - Tagammu Al-Khamis
Tel : +20 2 2616 1650
Fax: +20 2 2616 165
Muscat
Tel : + 968 24 591 006
Fax: + 968 24 597 006
unitech.oman@ikkgroup.com
KUWAIT
Kuwait City
Tel : +965 22 459 984
Fax: +965 22 459 985
unitech.kuwait@ikkgroup.com
YEMEN
Sanaa
Tel : +967 1 473 542
Fax: +967 1 473 542
unitech.yemen@ikkgroup.com
BAHRAIN
SUDAN
Manamah
Tel : +973 1 756 4386
Fax: +973 1 756 4315
unitech.bahrain@ikkgroup.com
Khartoum
Tel : +249 183 528 065
Fax: +249 183 248 065
unitech.sudan@ikkgroup.com
QATAR
UK
Doha
Tel : +974 4451 3301/2/3
Fax: +974 4451 3305
unitech.qatar@ikkgroup.com
Birmingham
Tel : +44 121 698 21 85
Fax: +44 121 698 21 47
unitech.uk@ikkgroup.com
SFSP / KINGDOM OF SAUDI ARABIA
SFSP / EGYPT
Specialized Factory for Steel Products - Jeddah

Tel : +966 2 637 4482
Fax: +966 2 636 1963
sfsp.jeddah@ikkgroup.com
Specialized Factory for Steel Products - 6th of October, Cairo

Tel : +20 2 3831 2477
Fax: +20 2 3831 1036
sfsp.cairo@ikkgroup.com
SFSP / UNITED ARAB EMIRATES

SIGMA Factory for Steel Products - Ajman
Tel : +971 6 743 9907
Fax: +971 6 743 9908
sfsp.ajman@ikkgroup.com
SIGMA Factory for Steel Products - Umm Al Quwain

Tel : +971 6 767 0514
Fax: +971 6 767 0515
sfsp.uaq@ikkgroup.com

Unitech Cable Trunking

Uploaded by

Copyright:

Available Formats

Unitech Cable Trunking

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Unitech Cable Trunking

Uploaded by

Copyright:

Available Formats

METALLIC CABLE

Specialized Factory for Steel Products

for Building & Construction Materials

METALLIC CABLE MANAGEMENT SYSTEMS

METALLIC CABLE MANAGEMENT SYSTEMS

MATERIALS & FINISHES

REFERENCES (Cable Management Systems):

IEC 61537 International Electrotechnical Commission

DOUBLE COMPARTMENT CABLE TRUNKING DCT

Bend 45 Inside Lid

Bend 45 Outside Lid

Bend 90 Top Lid

Bend 90 Inside Lid

Bend 90 Outside Lid

TEE Bend Top Lid

TEE Bend Inside Lid

TEE Bend Outside Lid

Cable Retaining Strap

CABLE TRUNKINGS SUPPORT SYSTEMS

Cantilever Arm Bracket

Cantilever Arm Bracket B2B

Standard Length: 3000 mm (Custom lengths are available upon request)

METAL FRAMING CHANNELS

KINGDOM OF SAUDI ARABIA

UNITED ARAB EMIRATES

Jeddah - Ghurab Showroom

Mak kah, Taif

Abu Dhabi - Musaffah

Riyadh - Rail St.Office

SFSP / KINGDOM OF SAUDI ARABIA

Specialized Factory for Steel Products - Jeddah

Specialized Factory for Steel Products - 6th of October, Cairo

SFSP / UNITED ARAB EMIRATES

SIGMA Factory for Steel Products - Umm Al Quwain

You might also like