The document provides steps to connect a laptop to an Enodeb via serial cable and Ethernet, configure their IP addresses, load software onto the Enodeb from the laptop, update the Enodeb software, and automatically integrate the Enodeb into the network. Key steps include connecting the laptop and Enodeb, setting their IP addresses, transferring files via FTP, updating the Enodeb security mode and software, and using the EMAS tool to allow autoconfiguration and integrate the Enodeb.
The document provides steps to connect a laptop to an Enodeb via serial cable and Ethernet, configure their IP addresses, load software onto the Enodeb from the laptop, update the Enodeb software, and automatically integrate the Enodeb into the network. Key steps include connecting the laptop and Enodeb, setting their IP addresses, transferring files via FTP, updating the Enodeb security mode and software, and using the EMAS tool to allow autoconfiguration and integrate the Enodeb.
The document provides steps to connect a laptop to an Enodeb via serial cable and Ethernet, configure their IP addresses, load software onto the Enodeb from the laptop, update the Enodeb software, and automatically integrate the Enodeb into the network. Key steps include connecting the laptop and Enodeb, setting their IP addresses, transferring files via FTP, updating the Enodeb security mode and software, and using the EMAS tool to allow autoconfiguration and integrate the Enodeb.
The document provides steps to connect a laptop to an Enodeb via serial cable and Ethernet, configure their IP addresses, load software onto the Enodeb from the laptop, update the Enodeb software, and automatically integrate the Enodeb into the network. Key steps include connecting the laptop and Enodeb, setting their IP addresses, transferring files via FTP, updating the Enodeb security mode and software, and using the EMAS tool to allow autoconfiguration and integrate the Enodeb.
Download as DOCX, PDF, TXT or read online from Scribd
Download as docx, pdf, or txt
You are on page 1/ 14
Connection TO EnodeB
LMTA serial cable (one end is serial and other is Ethernet)
LMTB Ethernet cable Launch putty and make sure which serial port you are connecting and enter the comport name and speed press connect.
2. Now set the laptop IP address as below
RBS Ethernet IP Address = 169.254.1.10 Laptop (Thin Client) IP Address = 169.254.1.11 As the laptop terminal is connected to rbs thats why its gateway is rbs ip.
Now laptop is configured to use with EMAS.
Preparing The DUL for initial configuration
1. Connect the DUL/DUW to laptop via serial cable
Step 2 restart the RBS in backup mode
Reload Step 3 check if C2 drive is mounted to the disk or not Vols If not mounted go to step 4 Step 4 mount_c2 Step5 format partitions formathd /d formathd /C2 Restart the rbs in backup mode
Reload Set the ip configuration using ifconfig Ifconfig le0 169.254.1.10 255.255.0.0 LOAD The BASIC PACKEGE 1. 2. 3. 4. 5.
Launch WS_FTP pro software
Use the binary transfer mode in ftp client for all the transfers Connect to the RBS using ip address 169.254.1.10 Enter username rbs and password rbs copy the c2 and d directory from the client to root directory of Enodeb 6. close the ftp client 7. reload DOWNLOAD AND INSTALL EMAS
http://169.254.1.10/em/index.html 169.254.1.10 is the ip address of Enodeb Connect to the node through EMAS In the address field type the ip address of Enodeb and in the name field type the name of Enodeb (give a unique name) Click add button then you will see a new nodeb n ame appear in the window click on the name and click connect
The software in the enodeb may need to be updated
Before updating software u first change the security mode to unsecure use serial connection putty any type o secmode f u
now open the EMAS and click on the software on the drop down menu and select up tab
Click on create UP Now you will see
Here you need to fill in the following information :
userLabel : CXP102051%18_R21DH (Unique name of the upgrade package) ftpserverIpAddress : 169.254.11 (The IP address of your laptop) user : anonymous (User name) password : anonymous (Password) upFilePathOnFtpServer : (Location of the .xml file on your laptop)
now click on create package, after the package has been created click on install package Then click on hard upgrade, then eNodeb will be upgraded. It will take 30 minutes for software loading.
Once the software is loaded it will ask for confirmation
Before confirming change the security mode setting to secure mode else auto integration will not be possible. Go to putty type Secmode f s Then confirm the upgrade by clicking on confirm upgrade.
AUTO INTEGERATION
Now after software loading its time for auto integration
Log in to the emas using Enodeb ip 169.254.1.10 now select Containment (mom based)
IN the MO tree select Managed equipment data
Set Autoconfiguration allowed to yes and the apply Click refresh until Autoconfiguration status become idle
Now you have to launch Integrate RBS wizard
Tools integrate RBS In the File path field, browse to the location of the Site Install file and click on Open. The SiteInstall file for DU1 will be named <SiteID>_DUL1_SiteInstall.xml The SiteInstall file for DU2 will be named <SiteID>_DUL2_SiteInstall.xml Username and password will be supplied to you.
Click Next to go to the Network configuration data page.
Dont change any details on this page. Click Next to go to the Configuration files date page. Make sure all the file path are empty here and there should not be any data.
Click next to go on cabinet data here you will fill cabinet related data like product name , number,serial number and revision number etc
After that click on Start integration
When the process reached 82 or 94 pecent OSS engineer will do some
configuration and then you will receive message Site integration complete.
