Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 53 views

    Branch Table Generator by A.V. Acharya

    Uploaded by

    Alexandre Freitas
    The document describes a procedure for using a branch table generator spreadsheet to analyze the reinforcement requirements for pipe branches in a piping system. It includes input fields for pipe specifications, material properties, and other parameters. Calculations are performed to determine the minimum required pipe wall thicknesses and whether reinforcement is needed at pipe joints based on the entered data. An example branch table is generated with reinforcement (R) or no reinforcement (P) indicated for different pipe sizes.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Branch Table Generator by A.V. Acharya

    Uploaded by

    Alexandre Freitas
    53 views55 pages
    The document describes a procedure for using a branch table generator spreadsheet to analyze the reinforcement requirements for pipe branches in a piping system. It includes input fields for pipe specifications, material properties, and other parameters. Calculations are performed to determine the minimum required pipe wall thicknesses and whether reinforcement is needed at pipe joints based on the entered data. An example branch table is generated with reinforcement (R) or no reinforcement (P) indicated for different pipe sizes.

    Original Description:

    Branch Table

    Original Title

    Branch Table

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a procedure for using a branch table generator spreadsheet to analyze the reinforcement requirements for pipe branches in a piping system. It includes input fields for pipe specifications, material properties, and other parameters. Calculations are performed to determine the minimum required pipe wall thicknesses and whether reinforcement is needed at pipe joints based on the entered data. An example branch table is generated with reinforcement (R) or no reinforcement (P) indicated for different pipe sizes.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    53 views55 pages

    Branch Table Generator by A.V. Acharya

    Uploaded by

    Alexandre Freitas
    The document describes a procedure for using a branch table generator spreadsheet to analyze the reinforcement requirements for pipe branches in a piping system. It includes input fields for pipe specifications, material properties, and other parameters. Calculations are performed to determine the minimum required pipe wall thicknesses and whether reinforcement is needed at pipe joints based on the entered data. An example branch table is generated with reinforcement (R) or no reinforcement (P) indicated for different pipe sizes.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 55
    At a glance
    Powered by AI
    The document describes a procedure for using a spreadsheet to generate branch tables for pipe reinforcement requirements based on pipe material properties and dimensions.

    You enter design conditions and pipe properties on the 'master' worksheet. This automatically populates branch tables on other worksheets indicating reinforcement needs.

    Pipe dimensions, material properties, design pressure/temperature, wall thicknesses, corrosion allowance, etc. are required as inputs to calculate reinforcement requirements.

    BRANCH TABLE GENERATOR

    BY A.V. Acharya

    Procedure for using branch generator.


    1)There are 2 components for the spreadsheet the calculation part and the brach table generator.
    2)The coloured part of the spreadsheet can be changed
    Consequently the table for the branch table also changes
    3)its preferable to use master copy of excel sheet before each calculation for each spec
    4)the branch table generated can be copied to other spreadsheets for use
    5) Start with the work sheet " 36" master for data entry " enter data fully , when data has been entered fully the consequent tables also change ,
    but it is advisable to check data in the consequent tables of correctness
    6) When the data has been entered and it can bee seen that the branch table worksheet changes , indicating that reinforcement is required or not
    7)If refinforcement is required then pad has to be provided

    Piping

    Spec-:

    A1A

    2"

    3"
    4"

    6"

    8"

    P
    6"

    P
    4"

    P
    3"

    P
    2"

    10"
    12"

    HEADER

    14"
    16"
    18"
    20"
    22"
    24"
    26"
    28"
    30"
    32"
    34"
    36"

    R
    P
    36"

    P
    34"

    P
    P
    P
    P
    P
    P
    P
    P
    P
    P
    P
    P
    32" 30" 28" 26" 24" 22" 20" 18" 16" 14" 12" 10"

    BRANCH
    R-Reinforcement pad is reqd
    P-Pipe to pipe joint

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    VALUES
    HDR./BR.
    36/34
    150.0000
    150.0000

    Api 5l

    Api 5l

    DATA ENTRY SYMBOL.


    VALUES
    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    HDR./BR.
    36/32
    36/30
    36/28
    150.0000
    150.0000
    150.0000
    150.0000
    150.0000
    150.0000
    Api 5l

    Api 5l

    Api 5l

    VALUES
    HDR./BR.
    36/26
    150.0000
    150.0000

    VALUES
    HDR./BR.
    36/24
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.5000
    0.5000
    0.4375
    0.4375
    0.1000
    12.5000
    12.5000
    36.0000
    36.0000
    0.2500

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.500
    0.315
    0.4375
    0.2756
    0.100
    12.500
    12.5000
    36.000
    34.000
    0.220

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.500
    0.315
    0.4375
    0.2756
    0.100
    12.500
    12.5000
    36.000
    32.000
    0.221

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.500
    0.315
    0.4375
    0.2756
    0.100
    12.500
    12.5000
    36.000
    30.000
    0.221

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.500
    0.315
    0.4375
    0.2756
    0.100
    12.500
    12.5000
    36.000
    28.000
    0.221

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.500
    0.315
    0.4375
    0.2756
    0.100
    12.500
    12.5000
    36.000
    26.000
    0.221

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.500
    0.375
    0.4375
    0.3281
    0.100
    12.500
    12.5000
    36.000
    24.000
    0.250

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.1346
    0.1346
    4.7546
    7.1676
    0.3424
    0.2500
    0.3535

    0.1346
    0.1271
    4.5290
    6.8275
    0.0426
    0.2205
    0.2227

    0.1346
    0.1196
    4.2598
    6.4217
    0.0492
    0.2205
    0.2227

    0.1346
    0.1122
    3.9906
    6.0158
    0.0557
    0.2205
    0.2227

    0.1346
    0.1047
    3.7214
    5.6100
    0.0623
    0.2205
    0.2227

    0.1346
    0.0972
    3.4522
    5.2042
    0.0689
    0.2205
    0.2227

    0.1346
    0.0897
    3.1689
    4.7771
    0.1579
    0.2500
    0.2651

    in2
    in2

    0.2500
    7.7600

    0.0992
    6.9692

    0.0992
    6.5700

    0.0992
    6.1708

    0.0992
    5.7716

    0.0992
    5.3723

    0.1406
    5.0756

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    36/36
    150.0000
    150.0000

    Reinf not reqd

    Reinf not reqd Reinf not reqd Reinf not reqd Reinf not reqd

    316746322.xls

    Reinf not reqd

    Reinf not reqd

    3 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    VALUES
    HDR./BR.
    36/20
    150.0000
    150.0000

    VALUES
    HDR./BR.
    36/18
    150.0000
    150.0000

    VALUES
    HDR./BR.
    36/16
    150.0000
    150.0000

    VALUES
    HDR./BR.
    36/14
    150.0000
    150.0000

    VALUES
    HDR./BR.
    36/12
    150.0000
    150.0000

    VALUES
    HDR./BR.
    36/10
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.500
    0.375
    0.4375
    0.3281
    0.100
    12.500
    12.5000
    36.000
    22.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.500
    0.375
    0.4375
    0.3281
    0.100
    12.500
    12.5000
    36.000
    20.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.500
    0.375
    0.4375
    0.3281
    0.100
    12.500
    12.5000
    36.000
    18.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.500
    0.375
    0.4375
    0.3281
    0.100
    12.500
    12.5000
    36.000
    16.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.500
    0.375
    0.4375
    0.3281
    0.100
    12.500
    12.5000
    36.000
    14.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.500
    0.375
    0.4375
    0.3281
    0.100
    12.500
    12.5000
    36.000
    12.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.500
    0.365
    0.4375
    0.3193
    0.100
    12.500
    12.5000
    36.000
    10.750
    0.250

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.1346
    0.0823
    2.8997
    4.3713
    0.1664
    0.2500
    0.2651

    0.1346
    0.0748
    2.6305
    3.9655
    0.1749
    0.2500
    0.2651

    0.1346
    0.0673
    2.3613
    3.5597
    0.1834
    0.2500
    0.2651

    0.1346
    0.0598
    2.0921
    3.1539
    0.1920
    0.2500
    0.2651

    0.1346
    0.0523
    1.8229
    2.7481
    0.2005
    0.2500
    0.2651

    0.1346
    0.0477
    1.6547
    2.4944
    0.2058
    0.2500
    0.2651

    0.1346
    0.0402
    1.3879
    2.0922
    0.1965
    0.2500
    0.2580

    in2
    in2

    0.1406
    4.6783

    0.1406
    4.2810

    0.1406
    3.8838

    0.1406
    3.4865

    0.1406
    3.0892

    0.1406
    2.8409

    0.1332
    2.4219

    Reinf not reqd

    Reinf not reqd

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    36/22
    150.0000
    150.0000

    316746322.xls

    Reinf not reqd

    Reinf not reqd

    Reinf not reqd

    Reinf not reqd

    Reinf not reqd

    4 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR. VALUES
    HDR./BR.
    36/8
    TO =
    150.0000
    Pd =
    150.0000
    Api 5l
    Api 5l

    VALUES
    HDR./BR.
    36/4
    150.0000
    150.0000

    VALUES
    HDR./BR.
    36/3
    150.0000
    150.0000

    VALUES
    HDR./BR.
    36/2
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Sh=
    20000
    Sb=
    20000
    Eh=
    1.00
    Eb=
    1.00
    Y=
    0.40
    radians 1.57
    0.500
    0.322
    Th*=
    0.4375
    Tb*=
    0.2818
    C=
    0.100
    %=
    12.500
    %=
    12.5000
    Dh=
    36.000
    Db=
    8.625
    W=
    0.225

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.500
    0.280
    0.4375
    0.2449
    0.100
    12.500
    12.5000
    36.000
    6.625
    0.196

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.500
    0.337
    0.4375
    0.2949
    0.100
    12.500
    12.5000
    36.000
    4.500
    0.236

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.500
    0.300
    0.4375
    0.2625
    0.100
    12.500
    12.5000
    36.000
    3.500
    0.210

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.500
    0.343
    0.4375
    0.3000
    0.100
    12.500
    12.5000
    36.000
    2.375
    0.240

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.1346
    0.0322
    1.1120
    1.6763
    0.1359
    0.2254
    0.2277

    0.1346
    0.0248
    0.8527
    1.2854
    0.0871
    0.1959
    0.1979

    0.1346
    0.0168
    0.5532
    0.8340
    0.1735
    0.2359
    0.2383

    0.1346
    0.0131
    0.4273
    0.6442
    0.1214
    0.2100
    0.2121

    0.1346
    0.0089
    0.2658
    0.4007
    0.1912
    0.2400
    0.2424

    in2
    in2

    0.1037
    1.9159

    0.0784
    1.4509

    0.1136
    1.1210

    0.0900
    0.8556

    0.1176
    0.7095

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    36/6
    150.0000
    150.0000

    Reinf not reqd

    316746322.xls

    Reinf not reqd

    Reinf not reqd

    Reinf not reqd Reinf not reqd

    5 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Api 5l

    DATA ENTRY SYMBOL.


    VALUES
    VALUES
    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    HDR./BR.
    HDR./BR.
    34/32
    34/30
    34/28
    34/26
    150.0000 ### 150.0000 ### 150.0000 ### 150.0000
    150.0000 ### 150.0000 ### 150.0000 ### 150.0000
    Api 5l

    Api 5l

    Api 5l

    Api 5l

    VALUES
    HDR./BR.
    34/24
    150.0000
    150.0000

    VALUES
    HDR./BR.
    34/22
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.3150
    0.3150
    0.2756
    0.2756
    0.1000
    12.5000
    12.5000
    34.0000
    34.0000
    0.1929

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.315
    0.2756
    0.2756
    0.100
    12.500
    12.5000
    34.000
    32.000
    0.221

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.315
    0.2756
    0.2756
    0.100
    12.500
    12.5000
    34.000
    30.000
    0.221

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.315
    0.2756
    0.2756
    0.100
    12.500
    12.5000
    34.000
    28.000
    0.221

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.315
    0.2756
    0.2756
    0.100
    12.500
    12.5000
    34.000
    26.000
    0.221

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    34.000
    24.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    34.000
    22.000
    0.250

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.1271
    0.1271
    4.2774
    1.6310
    0.0426
    0.2205
    0.2227

    0.1271
    0.1271
    4.2774
    1.6310
    0.0426
    0.2205
    0.2227

    0.1271
    0.1196
    4.0231
    1.5341
    0.0492
    0.2205
    0.2227

    0.1271
    0.1122
    3.7689
    1.4371
    0.0557
    0.2205
    0.2227

    0.1271
    0.1047
    3.5147
    1.3402
    0.0623
    0.2205
    0.2227

    0.1271
    0.0972
    3.2471
    1.2382
    0.1149
    0.2500
    0.2651

    0.1271
    0.0897
    2.9928
    1.1412
    0.1215
    0.2500
    0.2651

    in2
    in2

    0.0992
    1.7728

    0.0992
    1.7728

    0.0992
    1.6825

    0.0992
    1.5921

    0.0992
    1.5017

    0.1406
    1.4937

    0.1406
    1.4033

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    34/34
    150.0000
    150.0000

    Reinf reqd

    316746322.xls

    Reinf reqd

    Reinf reqd

    6 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    VALUES
    HDR./BR.
    34/18
    150.0000
    150.0000

    VALUES
    HDR./BR.
    34/16
    150.0000
    150.0000

    VALUES
    HDR./BR.
    34/14
    150.0000
    150.0000

    VALUES
    HDR./BR.
    34/12.75
    150.0000
    150.0000

    VALUES
    HDR./BR.
    34/10.75
    150.0000
    150.0000

    VALUES
    HDR./BR.
    34/8.625
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    34.000
    20.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    34.000
    18.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    34.000
    16.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    34.000
    14.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    34.000
    12.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.365
    0.2756
    0.3193
    0.100
    12.500
    12.5000
    34.000
    10.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.322
    0.2756
    0.2818
    0.100
    12.500
    12.5000
    34.000
    8.625
    0.225

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.1271
    0.0823
    2.7386
    1.0443
    0.1281
    0.2500
    0.2651

    0.1271
    0.0748
    2.4844
    0.9473
    0.1346
    0.2500
    0.2651

    0.1271
    0.0673
    2.2301
    0.8504
    0.1412
    0.2500
    0.2651

    0.1271
    0.0598
    1.9759
    0.7534
    0.1478
    0.2500
    0.2651

    0.1271
    0.0523
    1.7217
    0.6565
    0.1543
    0.2500
    0.2651

    0.1271
    0.0477
    1.5650
    0.5968
    0.1507
    0.2500
    0.2580

    0.1271
    0.0402
    1.3203
    0.5034
    0.1243
    0.2254
    0.2277

    in2
    in2

    0.1406
    1.3130

    0.1406
    1.2226

    0.1406
    1.1322

    0.1406
    1.0418

    0.1406
    0.9514

    0.1332
    0.8807

    0.1037
    0.7315

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    34/20
    150.0000
    150.0000

    Reinf reqd

    Reinf reqd

    316746322.xls

    7 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR. VALUES
    HDR./BR.
    34/6.625
    TO =
    150.0000
    Pd =
    150.0000
    Api 5l
    Api 5l

    VALUES
    HDR./BR.
    34/3.5
    150.0000
    150.0000

    VALUES
    HDR./BR.
    34/2.375
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Sh=
    20000
    Sb=
    20000
    Eh=
    1.00
    Eb=
    1.00
    Y=
    0.40
    radians 1.57
    0.315
    0.280
    Th*=
    0.2756
    Tb*=
    0.2449
    C=
    0.100
    %=
    12.500
    %=
    12.5000
    Dh=
    34.000
    Db=
    6.625
    W=
    0.196

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.337
    0.2756
    0.2949
    0.100
    12.500
    12.5000
    34.000
    4.500
    0.236

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.300
    0.2756
    0.2625
    0.100
    12.500
    12.5000
    34.000
    3.500
    0.210

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.343
    0.2756
    0.3000
    0.100
    12.500
    12.5000
    34.000
    2.375
    0.240

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.1271
    0.0322
    1.0596
    0.4040
    0.0817
    0.1959
    0.1979

    0.1271
    0.0248
    0.7926
    0.3022
    0.1493
    0.2359
    0.2383

    0.1271
    0.0168
    0.5307
    0.2024
    0.1184
    0.2100
    0.2121

    0.1271
    0.0131
    0.3941
    0.1503
    0.1641
    0.2400
    0.2424

    in2
    in2

    0.0784
    0.5640

    0.1136
    0.5651

    0.0900
    0.4107

    0.1176
    0.4320

    Reinf reqd

    Reinf reqd

    Reinf reqd

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    34/4.5
    150.0000
    150.0000

    316746322.xls

    Reinf not reqd

    8 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    VALUES
    HDR./BR.
    32/30
    150.0000
    150.0000

    Api 5l

    Api 5l

    DATA ENTRY SYMBOL.


    VALUES
    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    HDR./BR.
    32/28
    32/26
    32/24
    150.0000
    150.0000
    150.0000
    150.0000
    150.0000
    150.0000
    Api 5l

    Api 5l

    Api 5l

    VALUES
    HDR./BR.
    32/22
    150.0000
    150.0000

    VALUES
    HDR./BR.
    32/20
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.3150
    0.3150
    0.2756
    0.2756
    0.1000
    12.5000
    12.5000
    32.0000
    32.0000
    0.1929

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.315
    0.2756
    0.2756
    0.100
    12.500
    12.5000
    32.000
    30.000
    0.221

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.315
    0.2756
    0.2756
    0.100
    12.500
    12.5000
    32.000
    28.000
    0.221

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.315
    0.2756
    0.2756
    0.100
    12.500
    12.5000
    32.000
    26.000
    0.221

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    32.000
    24.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    32.000
    22.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    32.000
    20.000
    0.250

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.1196
    0.1196
    3.7865
    1.7718
    0.0492
    0.2205
    0.2227

    0.1196
    0.1122
    3.5472
    1.6599
    0.0557
    0.2205
    0.2227

    0.1196
    0.1047
    3.3079
    1.5479
    0.0623
    0.2205
    0.2227

    0.1196
    0.0972
    3.0686
    1.4359
    0.0689
    0.2205
    0.2227

    0.1196
    0.0897
    2.8168
    1.3181
    0.1215
    0.2500
    0.2651

    0.1196
    0.0823
    2.5775
    1.2061
    0.1281
    0.2500
    0.2651

    0.1196
    0.0748
    2.3382
    1.0941
    0.1347
    0.2500
    0.2651

    in2
    in2

    0.0992
    1.9202

    0.0992
    1.8148

    0.0992
    1.7094

    0.0992
    1.6040

    0.1406
    1.5802

    0.1406
    1.4748

    0.1406
    1.3694

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    32/32
    150.0000
    150.0000

    Reinf reqd

    316746322.xls

    Reinf reqd

    Reinf reqd

    9 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    VALUES
    HDR./BR.
    32/16
    150.0000
    150.0000

    VALUES
    HDR./BR.
    32/14
    150.0000
    150.0000

    VALUES
    HDR./BR.
    32/12.75
    150.0000
    150.0000

    VALUES
    HDR./BR.
    32/10.75
    150.0000
    150.0000

    VALUES
    HDR./BR.
    32/8.625
    150.0000
    150.0000

    VALUES
    HDR./BR.
    32/6.625
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    32.000
    18.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    32.000
    16.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    32.000
    14.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    32.000
    12.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.365
    0.2756
    0.3193
    0.100
    12.500
    12.5000
    32.000
    10.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.322
    0.2756
    0.2818
    0.100
    12.500
    12.5000
    32.000
    8.625
    0.225

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.280
    0.2756
    0.2449
    0.100
    12.500
    12.5000
    32.000
    6.625
    0.196

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.1196
    0.0673
    2.0990
    0.9822
    0.1412
    0.2500
    0.2651

    0.1196
    0.0598
    1.8597
    0.8702
    0.1478
    0.2500
    0.2651

    0.1196
    0.0523
    1.6204
    0.7582
    0.1544
    0.2500
    0.2651

    0.1196
    0.0477
    1.4708
    0.6883
    0.1585
    0.2500
    0.2651

    0.1196
    0.0402
    1.2337
    0.5773
    0.1573
    0.2500
    0.2580

    0.1196
    0.0322
    0.9884
    0.4625
    0.1313
    0.2254
    0.2277

    0.1196
    0.0248
    0.7579
    0.3547
    0.0871
    0.1959
    0.1979

    in2
    in2

    0.1406
    1.2640

    0.1406
    1.1586

    0.1406
    1.0532

    0.1406
    0.9873

    0.1332
    0.8678

    0.1037
    0.6975

    0.0784
    0.5201

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    32/18
    150.0000
    150.0000

    Reinf reqd

    Reinf reqd

    316746322.xls

    10 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR. VALUES
    HDR./BR.
    32/4.5
    TO =
    150.0000
    Pd =
    150.0000
    Api 5l
    Api 5l

    VALUES
    HDR./BR.
    32/2.375
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Sh=
    20000
    Sb=
    20000
    Eh=
    1.00
    Eb=
    1.00
    Y=
    0.40
    radians 1.57
    0.315
    0.337
    Th*=
    0.2756
    Tb*=
    0.2949
    C=
    0.100
    %=
    12.500
    %=
    12.5000
    Dh=
    32.000
    Db=
    4.500
    W=
    0.236

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.300
    0.2756
    0.2625
    0.100
    12.500
    12.5000
    32.000
    3.500
    0.210

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.343
    0.2756
    0.3000
    0.100
    12.500
    12.5000
    32.000
    2.375
    0.240

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.1196
    0.0168
    0.4918
    0.2301
    0.1564
    0.2359
    0.2383

    0.1196
    0.0131
    0.3799
    0.1777
    0.1214
    0.2100
    0.2121

    0.1196
    0.0089
    0.2363
    0.1106
    0.1679
    0.2400
    0.2424

    in2
    in2

    0.1136
    0.5000

    0.0900
    0.3891

    0.1176
    0.3960

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    32/3.5
    150.0000
    150.0000

    Reinf not reqd

    Reinf not reqd

    316746322.xls

    Reinf not reqd

    11 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Api 5l

    DATA ENTRY SYMBOL.


    VALUES
    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    HDR./BR.
    30/28
    30/26
    30/24
    150.0000
    150.0000
    150.0000
    150.0000
    150.0000
    150.0000
    Api 5l

    Api 5l

    Api 5l

    VALUES
    HDR./BR.
    30/22
    150.0000
    150.0000

    VALUES
    HDR./BR.
    30/20
    150.0000
    150.0000

    VALUES
    HDR./BR.
    30/18
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.3150
    0.3150
    0.2756
    0.2756
    0.1000
    12.5000
    12.5000
    30.0000
    30.0000
    0.2205

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.315
    0.2756
    0.2756
    0.100
    12.500
    12.5000
    30.000
    28.000
    0.221

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.315
    0.2756
    0.2756
    0.100
    12.500
    12.5000
    30.000
    26.000
    0.221

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    30.000
    24.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    30.000
    22.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    30.000
    20.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    30.000
    18.000
    0.250

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.1122
    0.1122
    3.3255
    1.8816
    0.0557
    0.2205
    0.2227

    0.1122
    0.1047
    3.1012
    1.7546
    0.0623
    0.2205
    0.2227

    0.1122
    0.0972
    2.8769
    1.6277
    0.0689
    0.2205
    0.2227

    0.1122
    0.0897
    2.6407
    1.4941
    0.1215
    0.2500
    0.2651

    0.1122
    0.0823
    2.4164
    1.3672
    0.1281
    0.2500
    0.2651

    0.1122
    0.0748
    2.1921
    1.2403
    0.1347
    0.2500
    0.2651

    0.1122
    0.0673
    1.9678
    1.1134
    0.1412
    0.2500
    0.2651

    in2
    in2

    0.0992
    2.0365

    0.0992
    1.9161

    0.0992
    1.7958

    0.1406
    1.7563

    0.1406
    1.6359

    0.1406
    1.5156

    0.1406
    1.3952

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    30/30
    150.0000
    150.0000

    Reinf reqd

    316746322.xls

    Reinf reqd

    Reinf reqd

    12 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    VALUES
    HDR./BR.
    30/14
    150.0000
    150.0000

    VALUES
    HDR./BR.
    30/12.75
    150.0000
    150.0000

    VALUES
    HDR./BR.
    30/10.75
    150.0000
    150.0000

    VALUES
    HDR./BR.
    30/8.625
    150.0000
    150.0000

    VALUES
    HDR./BR.
    30/6.625
    150.0000
    150.0000

    VALUES
    HDR./BR.
    30/4.5
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    30.000
    16.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    30.000
    14.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    30.000
    12.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.365
    0.2756
    0.3193
    0.100
    12.500
    12.5000
    30.000
    10.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.322
    0.2756
    0.2818
    0.100
    12.500
    12.5000
    30.000
    8.625
    0.225

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.280
    0.2756
    0.2449
    0.100
    12.500
    12.5000
    30.000
    6.625
    0.196

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.337
    0.2756
    0.2949
    0.100
    12.500
    12.5000
    30.000
    4.500
    0.236

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.1122
    0.0598
    1.7434
    0.9864
    0.1478
    0.2500
    0.2651

    0.1122
    0.0523
    1.5191
    0.8595
    0.1544
    0.2500
    0.2651

    0.1122
    0.0477
    1.3789
    0.7802
    0.1585
    0.2500
    0.2651

    0.1122
    0.0402
    1.1566
    0.6544
    0.1573
    0.2500
    0.2580

    0.1122
    0.0322
    0.9266
    0.5243
    0.1313
    0.2254
    0.2277

    0.1122
    0.0248
    0.7106
    0.4020
    0.0871
    0.1959
    0.1979

    0.1122
    0.0168
    0.4610
    0.2608
    0.1564
    0.2359
    0.2383

    in2
    in2

    0.1406
    1.2748

    0.1406
    1.1545

    0.1406
    1.0793

    0.1332
    0.9449

    0.1037
    0.7593

    0.0784
    0.5675

    0.1136
    0.5308

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    30/16
    150.0000
    150.0000

    Reinf reqd

    Reinf reqd

    316746322.xls

    Reinf not reqd

    13 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR. VALUES
    HDR./BR.
    30/3.5
    TO =
    150.0000
    Pd =
    150.0000
    Api 5l
    Api 5l

    Api 5l
    Api 5l

    Sh=
    20000
    Sb=
    20000
    Eh=
    1.00
    Eb=
    1.00
    Y=
    0.40
    radians 1.57
    0.315
    0.300
    Th*=
    0.2756
    Tb*=
    0.2625
    C=
    0.100
    %=
    12.500
    %=
    12.5000
    Dh=
    30.000
    Db=
    3.500
    W=
    0.210

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.343
    0.2756
    0.3000
    0.100
    12.500
    12.5000
    30.000
    2.375
    0.240

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.1122
    0.0131
    0.3561
    0.2015
    0.1214
    0.2100
    0.2121

    0.1122
    0.0089
    0.2215
    0.1253
    0.1679
    0.2400
    0.2424

    in2
    in2

    0.0900
    0.4129

    0.1176
    0.4108

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    30/2.375
    150.0000
    150.0000

    Reinf not reqd

    Reinf not reqd

    316746322.xls

    14 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Api 5l

    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    28/26
    28/24
    150.0000
    150.0000
    150.0000
    150.0000
    Api 5l

    Api 5l

    VALUES
    HDR./BR.
    28/22
    150.0000
    150.0000

    VALUES
    HDR./BR.
    28/20
    150.0000
    150.0000

    VALUES
    HDR./BR.
    28/18
    150.0000
    150.0000

    VALUES
    HDR./BR.
    28/16
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.3150
    0.3150
    0.2756
    0.2756
    0.1000
    12.5000
    12.5000
    28.0000
    28.0000
    0.2205

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.315
    0.2756
    0.2756
    0.100
    12.500
    12.5000
    28.000
    26.000
    0.221

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    28.000
    24.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    28.000
    22.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    28.000
    20.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    28.000
    18.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    28.000
    16.000
    0.250

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.1047
    0.1047
    2.8944
    1.9614
    0.0623
    0.2205
    0.2227

    0.1047
    0.0972
    2.6851
    1.8195
    0.0689
    0.2205
    0.2227

    0.1047
    0.0897
    2.4647
    1.6702
    0.1215
    0.2500
    0.2651

    0.1047
    0.0823
    2.2553
    1.5283
    0.1281
    0.2500
    0.2651

    0.1047
    0.0748
    2.0460
    1.3864
    0.1347
    0.2500
    0.2651

    0.1047
    0.0673
    1.8366
    1.2445
    0.1412
    0.2500
    0.2651

    0.1047
    0.0598
    1.6272
    1.1027
    0.1478
    0.2500
    0.2651

    in2
    in2

    0.0992
    2.1229

    0.0992
    1.9876

    0.1406
    1.9323

    0.1406
    1.7970

    0.1406
    1.6617

    0.1406
    1.5264

    0.1406
    1.3911

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    28/28
    150.0000
    150.0000

    Reinf reqd

    316746322.xls

    Reinf reqd

    Reinf reqd

    15 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    VALUES
    HDR./BR.
    28/12.75
    150.0000
    150.0000

    VALUES
    HDR./BR.
    28/10.75
    150.0000
    150.0000

    VALUES
    HDR./BR.
    28/8.625
    150.0000
    150.0000

    VALUES
    HDR./BR.
    28/6.625
    150.0000
    150.0000

    VALUES
    HDR./BR.
    28/4.5
    150.0000
    150.0000

    VALUES
    HDR./BR.
    28/3.5
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    28.000
    14.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    28.000
    12.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.365
    0.2756
    0.3193
    0.100
    12.500
    12.5000
    28.000
    10.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.322
    0.2756
    0.2818
    0.100
    12.500
    12.5000
    28.000
    8.625
    0.225

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.280
    0.2756
    0.2449
    0.100
    12.500
    12.5000
    28.000
    6.625
    0.196

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.337
    0.2756
    0.2949
    0.100
    12.500
    12.5000
    28.000
    4.500
    0.236

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.300
    0.2756
    0.2625
    0.100
    12.500
    12.5000
    28.000
    3.500
    0.210

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.1047
    0.0523
    1.4178
    0.9608
    0.1544
    0.2500
    0.2651

    0.1047
    0.0477
    1.2870
    0.8721
    0.1585
    0.2500
    0.2651

    0.1047
    0.0402
    1.0795
    0.7315
    0.1573
    0.2500
    0.2580

    0.1047
    0.0322
    0.8649
    0.5861
    0.1313
    0.2254
    0.2277

    0.1047
    0.0248
    0.6632
    0.4494
    0.0871
    0.1959
    0.1979

    0.1047
    0.0168
    0.4303
    0.2916
    0.1564
    0.2359
    0.2383

    0.1047
    0.0131
    0.3324
    0.2252
    0.1214
    0.2100
    0.2121

    in2
    in2

    0.1406
    1.2558

    0.1406
    1.1712

    0.1332
    1.0220

    0.1037
    0.8211

    0.0784
    0.6148

    0.1136
    0.5615

    0.0900
    0.4366

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    28/14
    150.0000
    150.0000

    Reinf reqd

    Reinf reqd

    316746322.xls

    Reinf not reqd

    Reinf not reqd

    16 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR. VALUES
    HDR./BR.
    28/2.375
    TO =
    150.0000
    Pd =
    150.0000
    Api 5l
    Api 5l

    Sh=
    20000
    Sb=
    20000
    Eh=
    1.00
    Eb=
    1.00
    Y=
    0.40
    radians 1.57
    0.315
    0.343
    Th*=
    0.2756
    Tb*=
    0.3000
    C=
    0.100
    %=
    12.500
    %=
    12.5000
    Dh=
    28.000
    Db=
    2.375
    W=
    0.240
    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.1047
    0.0089
    0.2067
    0.1401
    0.1679
    0.2400
    0.2424

    in2
    in2

    0.1176
    0.4256

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    Reinf not reqd

    316746322.xls

    17 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.
    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    26/26
    26/24
    TO =
    150.0000
    150.0000
    Pd =
    150.0000
    150.0000
    Api 5l

    VALUES
    HDR./BR.
    26/20
    150.0000
    150.0000

    VALUES
    HDR./BR.
    26/18
    150.0000
    150.0000

    VALUES
    HDR./BR.
    26/16
    150.0000
    150.0000

    VALUES
    HDR./BR.
    26/14
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.3150
    0.3150
    0.2756
    0.2756
    0.1000
    12.5000
    12.5000
    26.0000
    26.0000
    0.2205

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    26.000
    24.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    26.000
    22.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    26.000
    20.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    26.000
    18.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    26.000
    16.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    26.000
    14.000
    0.250

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0972
    0.0972
    2.4933
    2.0113
    0.0689
    0.2205
    0.2227

    0.0972
    0.0897
    2.2886
    1.8462
    0.1215
    0.2500
    0.2651

    0.0972
    0.0823
    2.0942
    1.6894
    0.1281
    0.2500
    0.2651

    0.0972
    0.0748
    1.8998
    1.5326
    0.1347
    0.2500
    0.2651

    0.0972
    0.0673
    1.7054
    1.3757
    0.1412
    0.2500
    0.2651

    0.0972
    0.0598
    1.5110
    1.2189
    0.1478
    0.2500
    0.2651

    0.0972
    0.0523
    1.3166
    1.0621
    0.1544
    0.2500
    0.2651

    in2
    in2

    0.0992
    2.1794

    0.1406
    2.1084

    0.1406
    1.9581

    0.1406
    1.8078

    0.1406
    1.6576

    0.1406
    1.5073

    0.1406
    1.3570

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Reinf reqd

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    Api 5l

    VALUES
    HDR./BR.
    26/22
    150.0000
    150.0000

    Reinf reqd

    316746322.xls

    Reinf reqd

    Reinf not reqd

    18 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR. VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    26/12.75
    26/10.75
    TO =
    150.0000
    150.0000
    Pd =
    150.0000
    150.0000
    Api 5l

    VALUES
    HDR./BR.
    26/6.625
    150.0000
    150.0000

    VALUES
    HDR./BR.
    26/4.5
    150.0000
    150.0000

    VALUES
    HDR./BR.
    26/3.5
    150.0000
    150.0000

    VALUES
    HDR./BR.
    26/2.375
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.375
    0.2756
    0.3281
    0.100
    12.500
    12.5000
    26.000
    12.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.365
    0.2756
    0.3193
    0.100
    12.500
    12.5000
    26.000
    10.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.322
    0.2756
    0.2818
    0.100
    12.500
    12.5000
    26.000
    8.625
    0.225

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.280
    0.2756
    0.2449
    0.100
    12.500
    12.5000
    26.000
    6.625
    0.196

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.337
    0.2756
    0.2949
    0.100
    12.500
    12.5000
    26.000
    4.500
    0.236

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.300
    0.2756
    0.2625
    0.100
    12.500
    12.5000
    26.000
    3.500
    0.210

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.315
    0.343
    0.2756
    0.3000
    0.100
    12.500
    12.5000
    26.000
    2.375
    0.240

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0972
    0.0477
    1.1951
    0.9640
    0.1585
    0.2500
    0.2651

    0.0972
    0.0402
    1.0023
    0.8086
    0.1573
    0.2500
    0.2580

    0.0972
    0.0322
    0.8031
    0.6478
    0.1313
    0.2254
    0.2277

    0.0972
    0.0248
    0.6158
    0.4968
    0.0871
    0.1959
    0.1979

    0.0972
    0.0168
    0.3996
    0.3223
    0.1564
    0.2359
    0.2383

    0.0972
    0.0131
    0.3086
    0.2490
    0.1214
    0.2100
    0.2121

    0.0972
    0.0089
    0.1920
    0.1549
    0.1679
    0.2400
    0.2424

    in2
    in2

    0.1406
    1.2631

    0.1332
    1.0991

    0.1037
    0.8829

    0.0784
    0.6622

    0.1136
    0.5922

    0.0900
    0.4604

    0.1176
    0.4403

    Reinf not reqd

    Reinf not reqd

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    Api 5l

    VALUES
    HDR./BR.
    26/8.625
    150.0000
    150.0000

    316746322.xls

    Reinf not reqd

    Reinf not reqd

    Reinf not reqd

    Reinf not reqd

    Reinf not reqd

    19 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS

    ABBR.

    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=
    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    in2
    in2

    316746322.xls

    20 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    VALUES
    HDR./BR.
    24/22
    150.0000
    150.0000

    VALUES
    HDR./BR.
    24/20
    150.0000
    150.0000

    VALUES
    HDR./BR.
    24/18
    150.0000
    150.0000

    VALUES
    HDR./BR.
    24/16
    150.0000
    150.0000

    VALUES
    HDR./BR.
    24/14
    150.0000
    150.0000

    VALUES
    HDR./BR.
    24/12.75
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.3750
    0.3750
    0.3281
    0.3281
    0.1000
    12.5000
    12.5000
    24.0000
    24.0000
    0.2500

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    24.000
    22.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    24.000
    20.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    24.000
    18.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    24.000
    16.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    24.000
    14.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    24.000
    12.750
    0.250

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0897
    0.0897
    2.1126
    3.2583
    0.1579
    0.2500
    0.2651

    0.0897
    0.0823
    1.9331
    2.9815
    0.1664
    0.2500
    0.2651

    0.0897
    0.0748
    1.7537
    2.7047
    0.1749
    0.2500
    0.2651

    0.0897
    0.0673
    1.5742
    2.4280
    0.1834
    0.2500
    0.2651

    0.0897
    0.0598
    1.3948
    2.1512
    0.1920
    0.2500
    0.2651

    0.0897
    0.0523
    1.2153
    1.8744
    0.2005
    0.2500
    0.2651

    0.0897
    0.0477
    1.1031
    1.7014
    0.2058
    0.2500
    0.2651

    in2
    in2

    0.1406
    3.5568

    0.1406
    3.2885

    0.1406
    3.0203

    0.1406
    2.7520

    0.1406
    2.4838

    0.1406
    2.2155

    0.1406
    2.0478

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    24/24
    150.0000
    150.0000

    Reinf not reqd

    Reinf not reqd

    316746322.xls

    Reinf not reqd Reinf not reqd

    Reinf not reqd Reinf not reqd

    Reinf not reqd

    21 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    VALUES
    HDR./BR.
    24/8.625
    150.0000
    150.0000

    VALUES
    HDR./BR.
    24/6.625
    150.0000
    150.0000

    VALUES
    HDR./BR.
    24/4.5
    150.0000
    150.0000

    VALUES
    HDR./BR.
    24/3.5
    150.0000
    150.0000

    VALUES
    HDR./BR.
    24/2.375
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.365
    0.3281
    0.3193
    0.100
    12.500
    12.5000
    24.000
    10.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.322
    0.3281
    0.2818
    0.100
    12.500
    12.5000
    24.000
    8.625
    0.225

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.280
    0.3281
    0.2449
    0.100
    12.500
    12.5000
    24.000
    6.625
    0.196

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.337
    0.3281
    0.2949
    0.100
    12.500
    12.5000
    24.000
    4.500
    0.236

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.300
    0.3281
    0.2625
    0.100
    12.500
    12.5000
    24.000
    3.500
    0.210

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.343
    0.3281
    0.3000
    0.100
    12.500
    12.5000
    24.000
    2.375
    0.240

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0897
    0.0402
    0.9252
    1.4270
    0.1965
    0.2500
    0.2580

    0.0897
    0.0322
    0.7413
    1.1433
    0.1359
    0.2254
    0.2277

    0.0897
    0.0248
    0.5685
    0.8767
    0.0871
    0.1959
    0.1979

    0.0897
    0.0168
    0.3688
    0.5688
    0.1735
    0.2359
    0.2383

    0.0897
    0.0131
    0.2849
    0.4394
    0.1214
    0.2100
    0.2121

    0.0897
    0.0089
    0.1772
    0.2733
    0.1912
    0.2400
    0.2424

    in2
    in2

    0.1332
    1.7567

    0.1037
    1.3830

    0.0784
    1.0422

    0.1136
    0.8559

    0.0900
    0.6508

    0.1176
    0.5821

    Reinf not reqd

    Reinf not reqd

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    24/10.75
    150.0000
    150.0000

    316746322.xls

    Reinf not reqd

    Reinf not reqd

    Reinf not reqd

    Reinf not reqd

    22 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=
    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    in2
    in2

    316746322.xls

    23 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Api 5l

    VALUES
    VALUES
    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    HDR./BR.
    HDR./BR.
    22/20
    22/18
    22/16
    22/14
    150.0000 ### 150.0000 ### 150.0000 ### 150.0000
    150.0000 ### 150.0000 ### 150.0000 ### 150.0000
    Api 5l

    Api 5l

    Api 5l

    Api 5l

    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    22/12.75
    22/10.75
    150.0000 ### 150.0000
    150.0000 ### 150.0000
    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.3750
    0.3750
    0.3281
    0.3281
    0.1000
    12.5000
    12.5000
    22.0000
    22.0000
    0.2500

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    22.000
    20.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    22.000
    18.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    22.000
    16.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    22.000
    14.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    22.000
    12.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.365
    0.3281
    0.3193
    0.100
    12.500
    12.5000
    22.000
    10.750
    0.250

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0823
    0.0823
    1.7720
    3.1426
    0.1664
    0.2500
    0.2651

    0.0823
    0.0748
    1.6075
    2.8509
    0.1749
    0.2500
    0.2651

    0.0823
    0.0673
    1.4430
    2.5591
    0.1834
    0.2500
    0.2651

    0.0823
    0.0598
    1.2785
    2.2674
    0.1920
    0.2500
    0.2651

    0.0823
    0.0523
    1.1140
    1.9757
    0.2005
    0.2500
    0.2651

    0.0823
    0.0477
    1.0112
    1.7933
    0.2058
    0.2500
    0.2651

    0.0823
    0.0402
    0.8481
    1.5041
    0.1965
    0.2500
    0.2580

    in2
    in2

    0.1406
    3.4496

    0.1406
    3.1664

    0.1406
    2.8832

    0.1406
    2.6000

    0.1406
    2.3168

    0.1406
    2.1398

    0.1332
    1.8338

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    22/22
    150.0000
    150.0000

    Reinf not reqd

    Reinf not reqd

    316746322.xls

    Reinf not reqd Reinf not reqd

    Reinf not reqd Reinf not reqd

    Reinf not reqd

    24 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    VALUES
    HDR./BR.
    22/6.625
    150.0000
    150.0000

    VALUES
    HDR./BR.
    22/4.5
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    22/3.5
    22/2.375
    150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ###
    150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ###
    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.322
    0.3281
    0.2818
    0.100
    12.500
    12.5000
    22.000
    8.625
    0.225

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.280
    0.3281
    0.2449
    0.100
    12.500
    12.5000
    22.000
    6.625
    0.196

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.337
    0.3281
    0.2949
    0.100
    12.500
    12.5000
    22.000
    4.500
    0.236

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.300
    0.3281
    0.2625
    0.100
    12.500
    12.5000
    22.000
    3.500
    0.210

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.343
    0.3281
    0.3000
    0.100
    12.500
    12.5000
    22.000
    2.375
    0.240

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0823
    0.0322
    0.6795
    1.2051
    0.1359
    0.2254
    0.2277

    0.0823
    0.0248
    0.5211
    0.9241
    0.0871
    0.1959
    0.1979

    0.0823
    0.0168
    0.3381
    0.5996
    0.1735
    0.2359
    0.2383

    0.0823
    0.0131
    0.2612
    0.4631
    0.1214
    0.2100
    0.2121

    0.0823
    0.0089
    0.1624
    0.2881
    0.1912
    0.2400
    0.2424

    in2
    in2

    0.1037
    1.4448

    0.0784
    1.0895

    0.1136
    0.8866

    0.0900
    0.6745

    0.1176
    0.5969

    Reinf not reqd

    Reinf not reqd

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    22/8.625
    150.0000
    150.0000

    316746322.xls

    Reinf not reqd

    Reinf not reqd

    Reinf not reqd

    25 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000


    150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=
    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    in2
    in2

    316746322.xls

    26 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Api 5l

    VALUES
    VALUES
    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    HDR./BR.
    HDR./BR.
    20/18
    20/16
    20/14
    20/12.75
    150.0000 ### 150.0000 ### 150.0000 ### 150.0000
    150.0000 ### 150.0000 ### 150.0000 ### 150.0000
    Api 5l

    Api 5l

    Api 5l

    Api 5l

    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    20/10.75
    20/8.625
    150.0000 ### 150.0000 ###
    150.0000 ### 150.0000 ###
    Api 5l

    ###

    ###
    0

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.3750
    0.3750
    0.3281
    0.3281
    0.1000
    12.5000
    12.5000
    20.0000
    20.0000
    0.2500

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    20.000
    18.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    20.000
    16.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    20.000
    14.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    20.000
    12.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.365
    0.3281
    0.3193
    0.100
    12.500
    12.5000
    20.000
    10.750
    0.250

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0748
    0.0748
    1.4614
    2.9970
    0.1749
    0.2500
    0.2651

    0.0748
    0.0673
    1.3118
    2.6903
    0.1834
    0.2500
    0.2651

    0.0748
    0.0598
    1.1623
    2.3836
    0.1920
    0.2500
    0.2651

    0.0748
    0.0523
    1.0127
    2.0769
    0.2005
    0.2500
    0.2651

    0.0748
    0.0477
    0.9193
    1.8852
    0.2058
    0.2500
    0.2651

    0.0748
    0.0402
    0.7710
    1.5812
    0.1965
    0.2500
    0.2580

    0.0748
    0.0322
    0.6178
    1.2669
    0.1359
    0.2254
    0.2277

    in2
    in2

    0.1406
    3.3126

    0.1406
    3.0144

    0.1406
    2.7162

    0.1406
    2.4181

    0.1406
    2.2317

    0.1332
    1.9109

    0.1037
    1.5065

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    20/20
    150.0000
    150.0000

    Reinf not reqd

    Reinf not reqd

    316746322.xls

    Reinf not reqd Reinf not reqd

    ###

    ###
    ###
    ###
    0
    ###

    Reinf not reqd Reinf not reqd

    Api 5l

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.322
    0.3281
    0.2818
    0.100
    12.500
    12.5000
    20.000
    8.625
    0.225

    Reinf not reqd

    27 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Api 5l

    VALUES
    HDR./BR.
    20/4.5
    150.0000
    150.0000
    Api 5l

    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    20/3.5
    20/2.375
    ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ###
    ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ###
    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.280
    0.3281
    0.2449
    0.100
    12.500
    12.5000
    20.000
    6.625
    0.196

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.337
    0.3281
    0.2949
    0.100
    12.500
    12.5000
    20.000
    4.500
    0.236

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.300
    0.3281
    0.2625
    0.100
    12.500
    12.5000
    20.000
    3.500
    0.210

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.343
    0.3281
    0.3000
    0.100
    12.500
    12.5000
    20.000
    2.375
    0.240

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0748
    0.0248
    0.4737
    0.9715
    0.0871
    0.1959
    0.1979

    0.0748
    0.0168
    0.3073
    0.6303
    0.1735
    0.2359
    0.2383

    0.0748
    0.0131
    0.2374
    0.4869
    0.1214
    0.2100
    0.2121

    0.0748
    0.0089
    0.1477
    0.3028
    0.1912
    0.2400
    0.2424

    in2
    in2

    0.0784
    1.1369

    0.1136
    0.9174

    0.0900
    0.6983

    0.1176
    0.6117

    Reinf not reqd

    Reinf not reqd

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    20/6.625
    150.0000 ###
    150.0000 ###

    316746322.xls

    Reinf not reqd

    Reinf not reqd

    28 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000


    150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=
    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    in2
    in2

    316746322.xls

    29 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    VALUES
    HDR./BR.
    18/16
    150.0000
    150.0000

    VALUES
    HDR./BR.
    18/14
    150.0000
    150.0000

    VALUES
    HDR./BR.
    18/12.75
    150.0000
    150.0000

    VALUES
    HDR./BR.
    18/10.75
    150.0000
    150.0000

    VALUES
    HDR./BR.
    18/8.625
    150.0000
    150.0000

    VALUES
    HDR./BR.
    18/6.625
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.3750
    0.3750
    0.3281
    0.3281
    0.1000
    12.5000
    12.5000
    18.0000
    18.0000
    0.2500

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    18.000
    16.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    18.000
    14.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    18.000
    12.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.365
    0.3281
    0.3193
    0.100
    12.500
    12.5000
    18.000
    10.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.322
    0.3281
    0.2818
    0.100
    12.500
    12.5000
    18.000
    8.625
    0.225

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.280
    0.3281
    0.2449
    0.100
    12.500
    12.5000
    18.000
    6.625
    0.196

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0673
    0.0673
    1.1807
    2.8215
    0.1834
    0.2500
    0.2651

    0.0673
    0.0598
    1.0461
    2.4999
    0.1920
    0.2500
    0.2651

    0.0673
    0.0523
    0.9115
    2.1782
    0.2005
    0.2500
    0.2651

    0.0673
    0.0477
    0.8273
    1.9772
    0.2058
    0.2500
    0.2651

    0.0673
    0.0402
    0.6939
    1.6583
    0.1965
    0.2500
    0.2580

    0.0673
    0.0322
    0.5560
    1.3287
    0.1359
    0.2254
    0.2277

    0.0673
    0.0248
    0.4263
    1.0189
    0.0871
    0.1959
    0.1979

    in2
    in2

    0.1406
    3.1456

    0.1406
    2.8325

    0.1406
    2.5193

    0.1406
    2.3236

    0.1332
    1.9880

    0.1037
    1.5683

    0.0784
    1.1843

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    18/18
    150.0000
    150.0000

    Reinf not reqd

    Reinf not reqd

    316746322.xls

    Reinf not reqd Reinf not reqd

    Reinf not reqd Reinf not reqd

    Reinf not reqd

    30 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    VALUES
    HDR./BR.
    18/3.5
    150.0000
    150.0000

    VALUES
    HDR./BR.
    18/2.375
    150.0000
    150.0000

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.337
    0.3281
    0.2949
    0.100
    12.500
    12.5000
    18.000
    4.500
    0.236

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.300
    0.3281
    0.2625
    0.100
    12.500
    12.5000
    18.000
    3.500
    0.210

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.343
    0.3281
    0.3000
    0.100
    12.500
    12.5000
    18.000
    2.375
    0.240

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0673
    0.0168
    0.2766
    0.6610
    0.1735
    0.2359
    0.2383

    0.0673
    0.0131
    0.2137
    0.5106
    0.1214
    0.2100
    0.2121

    0.0673
    0.0089
    0.1329
    0.3176
    0.1912
    0.2400
    0.2424

    in2
    in2

    0.1136
    0.9481

    0.0900
    0.7220

    0.1176
    0.6264

    Reinf not reqd

    Reinf not reqd

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    18/4.5
    150.0000
    150.0000

    316746322.xls

    Reinf not reqd

    31 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=
    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    in2
    in2

    316746322.xls

    32 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    VALUES
    HDR./BR.
    16/14
    150.0000
    150.0000

    Api 5l

    Api 5l

    VALUES
    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    HDR./BR.
    16/12.75
    16/10.75
    16/8.625
    150.0000 ### 150.0000 ### 150.0000
    150.0000 ### 150.0000 ### 150.0000
    Api 5l

    Api 5l

    Api 5l

    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    16/6.625
    16/4.5
    150.0000 ### 150.0000 ###
    150.0000 ### 150.0000 ###
    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.3750
    0.3750
    0.3281
    0.3281
    0.1000
    12.5000
    12.5000
    16.0000
    16.0000
    0.2500

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    16.000
    14.000
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    16.000
    12.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.365
    0.3281
    0.3193
    0.100
    12.500
    12.5000
    16.000
    10.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.322
    0.3281
    0.2818
    0.100
    12.500
    12.5000
    16.000
    8.625
    0.225

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.280
    0.3281
    0.2449
    0.100
    12.500
    12.5000
    16.000
    6.625
    0.196

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.337
    0.3281
    0.2949
    0.100
    12.500
    12.5000
    16.000
    4.500
    0.236

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0598
    0.0598
    0.9298
    2.6161
    0.1920
    0.2500
    0.2651

    0.0598
    0.0523
    0.8102
    2.2795
    0.2005
    0.2500
    0.2651

    0.0598
    0.0477
    0.7354
    2.0691
    0.2058
    0.2500
    0.2651

    0.0598
    0.0402
    0.6168
    1.7354
    0.1965
    0.2500
    0.2580

    0.0598
    0.0322
    0.4942
    1.3904
    0.1359
    0.2254
    0.2277

    0.0598
    0.0248
    0.3790
    1.0662
    0.0871
    0.1959
    0.1979

    0.0598
    0.0168
    0.2459
    0.6918
    0.1735
    0.2359
    0.2383

    in2
    in2

    0.1406
    2.9487

    0.1406
    2.6206

    0.1406
    2.4156

    0.1332
    2.0651

    0.1037
    1.6301

    0.0784
    1.2317

    0.1136
    0.9788

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    16/16
    150.0000
    150.0000

    Reinf not reqd

    Reinf not reqd

    316746322.xls

    Reinf not reqd Reinf not reqd

    Reinf not reqd Reinf not reqd

    Reinf not reqd

    33 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Api 5l

    VALUES
    HDR./BR.
    16/2.375
    150.0000
    150.0000

    Api 5l

    Api 5l

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.343
    0.3281
    0.3000
    0.100
    12.500
    12.5000
    16.000
    2.375
    0.240

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0598
    0.0131
    0.1899
    0.5344
    0.1214
    0.2100
    0.2121

    0.0598
    0.0089
    0.1181
    0.3324
    0.1912
    0.2400
    0.2424

    in2
    in2

    0.0900
    0.7458

    0.1176
    0.6412

    Reinf not reqd

    Reinf not reqd

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ###
    ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ###

    Api 5l

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.300
    0.3281
    0.2625
    0.100
    12.500
    12.5000
    16.000
    3.500
    0.210

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    16/3.5
    150.0000 ###
    150.0000 ###

    316746322.xls

    34 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000


    150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=
    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    in2
    in2

    316746322.xls

    35 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Api 5l

    VALUES
    VALUES
    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    HDR./BR.
    HDR./BR.
    14/12.75
    14/10.75
    14/8.625
    14/6.625
    150.0000 ### 150.0000 ### 150.0000 ### 150.0000
    150.0000 ### 150.0000 ### 150.0000 ### 150.0000
    Api 5l

    Api 5l

    Api 5l

    Api 5l

    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    14/4.5
    14/3.5
    150.0000 ### 150.0000 ###
    150.0000 ### 150.0000 ###
    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.3750
    0.3750
    0.3281
    0.3281
    0.1000
    12.5000
    12.5000
    14.0000
    14.0000
    0.2500

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.375
    0.3281
    0.3281
    0.100
    12.500
    12.5000
    14.000
    12.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.365
    0.3281
    0.3193
    0.100
    12.500
    12.5000
    14.000
    10.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.322
    0.3281
    0.2818
    0.100
    12.500
    12.5000
    14.000
    8.625
    0.225

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.280
    0.3281
    0.2449
    0.100
    12.500
    12.5000
    14.000
    6.625
    0.196

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.337
    0.3281
    0.2949
    0.100
    12.500
    12.5000
    14.000
    4.500
    0.236

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.300
    0.3281
    0.2625
    0.100
    12.500
    12.5000
    14.000
    3.500
    0.210

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0523
    0.0523
    0.7089
    2.3807
    0.2005
    0.2500
    0.2651

    0.0523
    0.0477
    0.6435
    2.1610
    0.2058
    0.2500
    0.2651

    0.0523
    0.0402
    0.5397
    1.8125
    0.1965
    0.2500
    0.2580

    0.0523
    0.0322
    0.4324
    1.4522
    0.1359
    0.2254
    0.2277

    0.0523
    0.0248
    0.3316
    1.1136
    0.0871
    0.1959
    0.1979

    0.0523
    0.0168
    0.2151
    0.7225
    0.1735
    0.2359
    0.2383

    0.0523
    0.0131
    0.1662
    0.5581
    0.1214
    0.2100
    0.2121

    in2
    in2

    0.1406
    2.7219

    0.1406
    2.5075

    0.1332
    2.1422

    0.1037
    1.6919

    0.0784
    1.2790

    0.1136
    1.0096

    0.0900
    0.7695

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    14/14
    150.0000
    150.0000

    Reinf not reqd

    Reinf not reqd

    316746322.xls

    Reinf not reqd Reinf not reqd

    Reinf not reqd Reinf not reqd

    Reinf not reqd

    36 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    150.0000
    150.0000

    ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ###
    ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ###

    Api 5l
    Api 5l

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.343
    0.3281
    0.3000
    0.100
    12.500
    12.5000
    14.000
    2.375
    0.240

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0523
    0.0089
    0.1034
    0.3472
    0.1912
    0.2400
    0.2424

    in2
    in2

    0.1176
    0.6560

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    14/2.375
    150.0000 ###
    150.0000 ###

    Reinf not reqd

    316746322.xls

    37 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000


    150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=
    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    in2
    in2

    316746322.xls

    38 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Api 5l

    VALUES
    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    HDR./BR.
    12.75/10.75
    12.75/8.625
    12.75/6.625
    150.0000 ### 150.0000 ### 150.0000 ###
    150.0000 ### 150.0000 ### 150.0000 ###
    Api 5l

    Api 5l

    Api 5l

    VALUES
    HDR./BR.
    12.75/4.5
    150.0000
    150.0000
    Api 5l

    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    12.75/3.5
    12.75/2.375
    150.0000 ### 150.0000 ###
    150.0000 ### 150.0000 ###
    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.3750
    0.3750
    0.3281
    0.3281
    0.1000
    12.5000
    12.5000
    12.7500
    12.7500
    0.2500

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.365
    0.3281
    0.3193
    0.100
    12.500
    12.5000
    12.750
    10.750
    0.250

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.322
    0.3281
    0.2818
    0.100
    12.500
    12.5000
    12.750
    8.625
    0.225

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.280
    0.3281
    0.2449
    0.100
    12.500
    12.5000
    12.750
    6.625
    0.196

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.337
    0.3281
    0.2949
    0.100
    12.500
    12.5000
    12.750
    4.500
    0.236

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.300
    0.3281
    0.2625
    0.100
    12.500
    12.5000
    12.750
    3.500
    0.210

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.375
    0.343
    0.3281
    0.3000
    0.100
    12.500
    12.5000
    12.750
    2.375
    0.240

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0477
    0.0477
    0.5860
    2.2185
    0.2058
    0.2500
    0.2651

    0.0477
    0.0402
    0.4915
    1.8607
    0.1965
    0.2500
    0.2580

    0.0477
    0.0322
    0.3938
    1.4908
    0.1359
    0.2254
    0.2277

    0.0477
    0.0248
    0.3020
    1.1432
    0.0871
    0.1959
    0.1979

    0.0477
    0.0168
    0.1959
    0.7417
    0.1735
    0.2359
    0.2383

    0.0477
    0.0131
    0.1514
    0.5729
    0.1214
    0.2100
    0.2121

    0.0477
    0.0089
    0.0941
    0.3564
    0.1912
    0.2400
    0.2424

    in2
    in2

    0.1406
    2.5649

    0.1332
    2.1904

    0.1037
    1.7305

    0.0784
    1.3086

    0.1136
    1.0288

    0.0900
    0.7843

    0.1176
    0.6652

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    12.75/12.75
    150.0000
    150.0000

    Reinf not reqd

    Reinf not reqd

    316746322.xls

    Reinf not reqd Reinf not reqd

    Reinf not reqd Reinf not reqd

    Reinf not reqd

    39 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=
    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    in2
    in2

    316746322.xls

    40 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=
    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    in2
    in2

    316746322.xls

    41 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Api 5l

    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    10.75/8.625
    10.75/6.625
    150.0000 ### 150.0000 ###
    150.0000 ### 150.0000 ###
    Api 5l

    Api 5l

    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    10.75/4.5
    10.75/3.5
    150.0000 ### 150.0000
    150.0000 ### 150.0000
    Api 5l

    Api 5l

    VALUES
    HDR./BR.
    10.75/2.375
    150.0000 ### 150.0000 ###
    150.0000 ### 150.0000 ###
    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.3650
    0.3650
    0.3193
    0.3193
    0.1000
    12.5000
    12.5000
    10.7500
    10.7500
    0.2500

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.365
    0.322
    0.3193
    0.2818
    0.100
    12.500
    12.5000
    10.750
    8.625
    0.225

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.365
    0.280
    0.3193
    0.2449
    0.100
    12.500
    12.5000
    10.750
    6.625
    0.196

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.365
    0.337
    0.3193
    0.2949
    0.100
    12.500
    12.5000
    10.750
    4.500
    0.236

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.365
    0.300
    0.3193
    0.2625
    0.100
    12.500
    12.5000
    10.750
    3.500
    0.210

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.365
    0.343
    0.3193
    0.3000
    0.100
    12.500
    12.5000
    10.750
    2.375
    0.240

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0402
    0.0402
    0.4144
    1.8473
    0.1965
    0.2500
    0.2580

    0.0402
    0.0322
    0.3320
    1.4800
    0.1359
    0.2254
    0.2277

    0.0402
    0.0248
    0.2546
    1.1349
    0.0871
    0.1959
    0.1979

    0.0402
    0.0168
    0.1652
    0.7363
    0.1735
    0.2359
    0.2383

    0.0402
    0.0131
    0.1276
    0.5688
    0.1214
    0.2100
    0.2121

    0.0402
    0.0089
    0.0794
    0.3538
    0.1912
    0.2400
    0.2424

    in2
    in2

    0.1332
    2.1769

    0.1037
    1.7197

    0.0784
    1.3004

    0.1136
    1.0234

    0.0900
    0.7802

    0.1176
    0.6626

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    10.75/10.75
    150.0000
    150.0000

    Reinf not reqd

    Reinf not reqd

    316746322.xls

    Reinf not reqd Reinf not reqd

    Reinf not reqd Reinf not reqd

    42 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    150.0000 ###
    150.0000 ###

    150.0000
    150.0000

    ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ###
    ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ###

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=
    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    in2
    in2

    316746322.xls

    43 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000


    150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=
    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    in2
    in2

    316746322.xls

    44 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Api 5l

    VALUES
    HDR./BR.
    8.625/6.625
    150.0000 ###
    150.0000 ###
    Api 5l

    VALUES
    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    HDR./BR.
    8.625/4.5
    8.625/3.5
    8.625/2.375
    150.0000 ### 150.0000 ### 150.0000
    150.0000 ### 150.0000 ### 150.0000
    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.322
    0.280
    0.2818
    0.2449
    0.100
    12.500
    12.5000
    8.625
    6.625
    0.196

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.322
    0.337
    0.2818
    0.2949
    0.100
    12.500
    12.5000
    8.625
    4.500
    0.236

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.322
    0.300
    0.2818
    0.2625
    0.100
    12.500
    12.5000
    8.625
    3.500
    0.210

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.322
    0.343
    0.2818
    0.3000
    0.100
    12.500
    12.5000
    8.625
    2.375
    0.240

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0322
    0.0322
    0.2664
    1.2354
    0.1359
    0.2254
    0.2277

    0.0322
    0.0248
    0.2043
    0.9474
    0.0871
    0.1959
    0.1979

    0.0322
    0.0168
    0.1325
    0.6147
    0.1618
    0.2359
    0.2383

    0.0322
    0.0131
    0.1024
    0.4748
    0.1214
    0.2100
    0.2121

    0.0322
    0.0089
    0.0637
    0.2953
    0.1738
    0.2400
    0.2424

    in2
    in2

    0.1037
    1.4751

    0.0784
    1.1128

    0.1136
    0.8901

    0.0900
    0.6862

    0.1176
    0.5867

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    Reinf not reqd

    Reinf not reqd

    316746322.xls

    Reinf not reqd Reinf not reqd

    150.0000 ### 150.0000 ###


    150.0000 ### 150.0000 ###

    Api 5l

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.3220
    0.3220
    0.2818
    0.2818
    0.1000
    12.5000
    12.5000
    8.6250
    8.6250
    0.2254

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    8.625/8.625
    150.0000
    150.0000

    Reinf not reqd

    45 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    150.0000 ###
    150.0000 ###

    150.0000
    150.0000

    ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ###
    ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ###

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=
    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    in2
    in2

    316746322.xls

    46 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000


    150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=
    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    in2
    in2

    316746322.xls

    47 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Api 5l

    VALUES
    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    HDR./BR.
    6.625/4.5
    6.625/3.5
    6.625/2.375
    150.0000 ### 150.0000 ### 150.0000 ### 150.0000
    150.0000 ### 150.0000 ### 150.0000 ### 150.0000
    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.280
    0.337
    0.2449
    0.2949
    0.100
    12.500
    12.5000
    6.625
    4.500
    0.236

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.280
    0.300
    0.2449
    0.2625
    0.100
    12.500
    12.5000
    6.625
    3.500
    0.210

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.280
    0.343
    0.2449
    0.3000
    0.100
    12.500
    12.5000
    6.625
    2.375
    0.240

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0248
    0.0248
    0.1569
    0.7612
    0.0871
    0.1959
    0.1979

    0.0248
    0.0168
    0.1018
    0.4939
    0.1290
    0.2359
    0.2383

    0.0248
    0.0131
    0.0786
    0.3815
    0.1083
    0.2100
    0.2121

    0.0248
    0.0089
    0.0489
    0.2373
    0.1385
    0.2400
    0.2424

    in2
    in2

    0.0784
    0.9267

    0.1136
    0.7365

    0.0900
    0.5798

    0.1176
    0.4934

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    Reinf not reqd

    Reinf not reqd

    316746322.xls

    150.0000 ### 150.0000 ###


    150.0000 ### 150.0000 ###

    Api 5l

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.2799
    0.2799
    0.2449
    0.2449
    0.1000
    12.5000
    12.5000
    6.6250
    6.6250
    0.1959

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    6.625/6.625
    150.0000
    150.0000

    Reinf not reqd Reinf not reqd

    48 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    150.0000 ###
    150.0000 ###

    150.0000
    150.0000

    ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ###
    ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ###

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=
    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    in2
    in2

    316746322.xls

    49 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000


    150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=
    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    in2
    in2

    316746322.xls

    50 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Api 5l

    VALUES
    VALUES
    HDR./BR.
    HDR./BR.
    4.5/3.5
    4.5/2.375
    150.0000 ### 150.0000 ### 150.0000 ### 150.0000
    150.0000 ### 150.0000 ### 150.0000 ### 150.0000
    Api 5l

    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.337
    0.300
    0.2949
    0.2625
    0.100
    12.500
    12.5000
    4.500
    3.500
    0.210

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.337
    0.343
    0.2949
    0.3000
    0.100
    12.500
    12.5000
    4.500
    2.375
    0.240

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0168
    0.0168
    0.0692
    0.7318
    0.1735
    0.2359
    0.2383

    0.0168
    0.0131
    0.0534
    0.5653
    0.1214
    0.2100
    0.2121

    0.0168
    0.0089
    0.0332
    0.3516
    0.1863
    0.2400
    0.2424

    in2
    in2

    0.1136
    1.0189

    0.0900
    0.7767

    0.1176
    0.6555

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    Reinf not reqd

    Reinf not reqd

    316746322.xls

    150.0000 ### 150.0000 ###


    150.0000 ### 150.0000 ###

    Api 5l

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.3370
    0.3370
    0.2949
    0.2949
    0.1000
    12.5000
    12.5000
    4.5000
    4.5000
    0.2359

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    4.5/4.5
    150.0000
    150.0000

    Reinf not reqd

    51 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    150.0000 ###
    150.0000 ###

    150.0000
    150.0000

    ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ###
    ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ###

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=
    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    in2
    in2

    316746322.xls

    52 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000


    150.0000 ### 150.0000 ### 150.0000 ### 150.0000 ### 150.0000

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=
    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    in2
    in2

    316746322.xls

    53 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Api 5l

    VALUES
    HDR./BR.
    3.5/2.375
    150.0000 ###
    150.0000 ###
    Api 5l

    Api 5l

    Api 5l

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.3000
    0.3000
    0.2625
    0.2625
    0.1000
    12.5000
    12.5000
    3.5000
    3.5000
    0.2100

    20000
    20000
    1.00
    1.00
    0.40
    1.57
    0.300
    0.343
    0.2625
    0.3000
    0.100
    12.500
    12.5000
    3.500
    2.375
    0.240

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0131
    0.0131
    0.0415
    0.4744
    0.1214
    0.2100
    0.2121

    0.0131
    0.0089
    0.0258
    0.2951
    0.1553
    0.2400
    0.2424

    in2
    in2

    0.0900
    0.6858

    0.1176
    0.5680

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    3.5/3.5
    150.0000
    150.0000

    Reinf not reqd

    Reinf not reqd

    316746322.xls

    54 OF 55

    REINFORCEMENT PAD ANALYSIS

    REQUIREMENT OF REINFORCEMENT FOR PIPE BRANCH OF METALS


    Spec-:
    A1A
    SR. DESCRIPTION
    NO.
    1
    2
    3

    DESIGN TEMPERATURE (DEG.F.)


    DESIGN PRESSURE (PSIG.)
    MATERIAL OF CONSTRUCTION FOR HEADER

    4
    5
    6
    7
    8
    9

    MATERIAL OF CONSTRUCTION FOR BRANCH


    ALLOWABLE STRESS VALUE OF HEADER.(PSI)
    ALLOWABLE STRESS VALUE OF BRANCH.(PSI)
    JOINT EFFICIENCY FOR HEADER
    JOINT EFFICIENCY FOR BRANCH
    COEFFICIENT
    Branch angle (beta)
    NOMINAL THICKNESS OF HEADER PIPE.(INCH.)
    NOMINAL THICKNESS OF BRANCH PIPE.(INCH.)
    ACTUAL OR MEASURED THICKNESS HEADER
    ACTUAL OR MEASURED THICKNESS BRANCH
    CORROSION ALLOWANCE.(INCH.)
    MILL TOLERANCE (HEADER).
    MILL TOLERANCE (BRANCH).
    OUTSIDE DIAMETER OF PIPE HEADER.(INCH.)
    OUTSIDE DIAMETER OF BRANCH PIPE.(INCH.)
    SIZE OF WELD LEG.(INCH.)
    ANALYSIS
    MINIMUM PIPE HEADER PRESSURE THICKNESS
    MINIMUM PIPE BRANCH PRESSURE THICKNESS
    A1 (Required reinforcement area)in2
    A2 (Area from excess thickness in pipe wall)=
    A3(Area from excess thickness in branch wall)=

    10
    11
    12
    13
    14
    15
    16
    17
    18
    19

    ABBR.

    TO =
    Pd =

    Sh=
    Sb=
    Eh=
    Eb=
    Y=
    radians

    Api 5l
    Api 5l

    Th*=
    Tb*=
    C=
    %=
    %=
    Dh=
    Db=
    W=

    20000
    20000
    1.0000
    1.0000
    0.4000
    1.5708
    0.3429
    0.3429
    0.3000
    0.3000
    0.1000
    12.5000
    12.5000
    2.3750
    2.3750
    0.2400

    th=
    tb=
    A1=
    A2=
    A3=
    tc=

    0.0089
    0.0089
    0.0175
    0.3775
    0.1912
    0.2400
    0.2424

    in2
    in2

    0.1176
    0.6863

    minimum leg dimension of fillet weld


    A4(Area in branch welds)
    available area A2+A3+A4=

    VALUES
    HDR./BR.
    2.375/2.375
    150.0000
    150.0000

    Reinf not reqd

    316746322.xls

    55 OF 55

    You might also like