Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 57 views

    Datasheet MBC2K V2-0

    Uploaded by

    Cristiana Maria
    The MBC2K is a 2000W motor brake controller with the following key features: - It has a digital display interface and can handle a maximum braking current of 50A. - The input DC bus voltage range is 24-100Vdc. - It has protections for undervoltage, overvoltage, overtemperature of the brake resistor, internal overtemperature, short circuit, overload, and interrupted brake resistor. - Up to 4 units can be connected in parallel for a total braking power of 8kW.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Datasheet MBC2K V2-0

    Uploaded by

    Cristiana Maria
    57 views2 pages
    The MBC2K is a 2000W motor brake controller with the following key features: - It has a digital display interface and can handle a maximum braking current of 50A. - The input DC bus voltage range is 24-100Vdc. - It has protections for undervoltage, overvoltage, overtemperature of the brake resistor, internal overtemperature, short circuit, overload, and interrupted brake resistor. - Up to 4 units can be connected in parallel for a total braking power of 8kW.

    Original Description:

    Datasheet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The MBC2K is a 2000W motor brake controller with the following key features: - It has a digital display interface and can handle a maximum braking current of 50A. - The input DC bus voltage range is 24-100Vdc. - It has protections for undervoltage, overvoltage, overtemperature of the brake resistor, internal overtemperature, short circuit, overload, and interrupted brake resistor. - Up to 4 units can be connected in parallel for a total braking power of 8kW.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    57 views2 pages

    Datasheet MBC2K V2-0

    Uploaded by

    Cristiana Maria
    The MBC2K is a 2000W motor brake controller with the following key features: - It has a digital display interface and can handle a maximum braking current of 50A. - The input DC bus voltage range is 24-100Vdc. - It has protections for undervoltage, overvoltage, overtemperature of the brake resistor, internal overtemperature, short circuit, overload, and interrupted brake resistor. - Up to 4 units can be connected in parallel for a total braking power of 8kW.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    MBC2K

    2000W Motor Brake Controller

    Main features
    Digital Display interface
    INPUT DC BUS: 24100Vdc
    Maximum Braking Current: 50A
    User Settable Braking threshold and hysteresis
    Various integrated protections
    TECHNICAL DATA
    Model type
    GENERAL DATA
    Nominal DC BUS
    Voltage range
    Maximum Braking current
    Brake activation voltage
    Brake voltage hysteresis
    User interface
    Status Signal

    Protections

    Parallel connection
    Maximum dissipated power
    Operating temperature
    Input/ground insulation
    Protection degree
    Overvoltage category
    Pollution degree
    Safety standards
    EMC Standards

    Connection terminal

    Case material
    Approx. weight
    Size (W x H x D)
    Mounting Rail
    Rail mounting information

    MBC2K
    24110Vdc
    50A for 1sec.
    27106Vdc, threshold adjustable in 20 steps
    3Vdc or 6Vdc selectable
    - 2 setup push buttons (SET/RESET and MENU)
    - 2 x 7 segment LED displays
    - 1 LED for general alarm indication
    - 1 SPDT dry contact for general alarm remote warning
    - Undervoltage on DC BUS < 22Vdc
    - Overvoltage on DC BUS > 110Vdc
    - Brake resistor overtemperature (if the temperature sensor is present)
    - Module Internal overtemperature > 90C (194F)
    - Brake resistor interrupted or not connected
    - Short circuit : braking current > 80A
    - Overload : braking time > 1sec
    Up to 4 units can be connected in parallel through synchronization bus for a total braking power of 8kW
    (4 x 2kW braking resistors are needed)
    20W
    - 20C...+ 70C
    500Vac / 60 s
    IP20
    I
    2
    IEC-EN60950 for SELV use up to 60Vdc
    using the MBC2K at voltages greater than 60Vdc is not classifiable as SELV
    EN55011 Class B
    Input DC Bus + PE: 3 poles pluggable, 2.5mm, 5.08mm pitch
    Output Brake resistor: 2 poles pluggable, 2.5mm, 5.08mm pitch
    Resistor temp. sensor: 2 poles pluggable, 1.5mm2, 3.81mm pitch
    Alarm dry contact: 3poles pluggable, 1.5mm2, 3.81mm pitch
    Synchronization Bus : 2poles, pluggable, 1.5mm2, 3.81mm pitch
    Aluminium
    0.200Kg
    40.0 x 115.0 x 110.0 mm
    IEC 60715/H15/TH35-7.5(-15)
    Vertical, allow 10mm spacing between adjacent items

    Note: Technical parameters are typical and may change without prior notice.

    MBC2K v2.0

    25.03.2013

    Page 1/2

    MBC2K

    2000W Motor Brake Controller

    115

    Dimension

    110

    MBC2K v2.0

    10

    25.03.2013

    40

    Page 2/2

    You might also like