Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Automatic Transfer Switches

Download as pdf or txt
Download as pdf or txt
You are on page 1of 20

Switches

Automatic Transfer Switches


Low Voltage Products
Growing importance of a secure power
supply
2 Product overview | Automatic transfer switches
Every load that is connected to the grid and backed up by
a generator set needs a transfer device for commutating
the power sources when needed.
Standby power is an integral part of many industrial and
domestic electrical systems. High energy prices, energy
demand increase and aging power systems have been the
prime movers for the growth of standby power sources.
Automatic transfer switches | Product overview 3
The World is full of potential applications
There are many different applications where transferring
equipment is needed. The more critical the load is, the
more reliable must the ATSE (automatic transfer switching
equipment) be. Only to mention a few applications which are
secured with back-up power:
- Industrial plants
- Docks
- Telecommunication
- Farming
- Airports
Fully automatic solution
Our ATS range between 160 A and 1600 A includes
sophisticated features in extremely compact footprint
area without neglecting features that makes assembly
easy and safe, every time.
Safe and reliable
ABB automatic transfer switches ensure service continuity
with a number of built-in, integrated safety features. The
change-over mechanism, for example, offers three stable
positions which ensure isolation of the two asynchronous
power supplies. This eliminates any risk of short-circuit
between them, even in the presence of transient voltages.
The automatic transfer switch is equipped with handle for
manual operation in case of emergency
Easy installation
The design of ABB automatic transfer switch is advanced
and compact, allowing installation in confined spaces at
considerable savings. They are very easy to install: The
automatic control unit OMD_ can be adjusted according
to the mounting depth of the panel. Voltage sensing kit is
installed at the factory thus reducing the expensive and time-
consuming installation work.
No more expensive repair work
The motor operator of the ATS is protected by a fuse.
If the operation frequency is exceeded, the fuse protects the
motor, thus saving it from expensive repair work.
4 Product overview | Automatic transfer switches
1 Change-over switch
2 Automatic control unit (three types; OMD200, OMD300,
OMD800)
3 Motor operator
4 Switch panel, the operating mechanism
5 Handle for manual operation
6 Motor/Manual selection
7 Terminals for motor operator voltage supply
8 Terminals for locking state information
9 Fuse of motor operator
10 Locking latch for releasing the handle and locking
electrical control
11 Locking clip for locking manual operation
12 Voltage sensing wires
13 Place for auxiliary contact blocks
OTM_C_2D OTM_C_3D OTM_C_8D
OTM_C_D products overview
Manual operation with handle x x x
Local operation with front panel keypad x x x
Automatic transfer switching equipment (ATSE) x x x
Dual power source for the motor operator
1)
o x o
Measurement
Three phase voltage measurement on LINE 1 x x x
Single phase voltage measurement on LINE 1 x x x
Three phase voltage measurement on LINE 2 x x x
Single phase voltage measurement on LINE 2 x x x
Frequency on LINE 1 x x x
Frequency on LINE 2 x x x
Possibility to check the measurements via LCD x
Configuration
2)
By DIP switches x x
By rotary switches x x
By keypad and LCD x
Voltage threshold setting x x x
Frequency threshold setting x
Time delays
Switching delay x
3)
x
3)
x
Dead band time I-II x
Back-switching delay x
3)
x
3)
x
Dead band time II-I x
Generator stop delay x
4)
x
4)
x
Line priority x
Features
Generator start and stop x x x
Off-load test sequence x x x
On-load test sequence x x x
Source status via front panel x x x
Switch position via front panel x x x
LCD
5)
x
Fieldbus interface
6)
x
Secondary load control x
Alarm log x
Counter for number of operations x
Auxiliary voltage supply
7)
x
Applications
Transfer between two utilities x x x
Transfer between an utility and a genset x x x
Automatic transfer switches
160 A to 1600 A, OTM_C_D
1)
Dual power source allows the motor operator to be supplied by two separate voltage supplies.
This way the motor operator is always energized from the available line.
2)
Consult us for more detailed information
3)
OTM_C_2D and OTM_C_3D, the duration of Switching and Back-switching delays is the same, i.e. the time delay is same for I - II and II - I.
4)
OTM_C_2D and OTM_C_3D, Generator stop delay has two values; the same as Switching delay or 5 min.
5)
Menus available in six languages; English, French, German, Italian, Spanish and Finnish.
6)
Bus communication protocol is Modbus
7)
In case of source failure, the OMD controller unit can be supplied with an external auxiliary supply with 24110 V DC.
x = included as standard
o = as an accessory
Automatic transfer switches | Product overview 5
6 Technical data | Automatic transfer switches
Technical data
Automatic transfer switches
Automatic transfer switches
Data according to IEC 60947-3
Data according to IEC 60947-6-1
Switch size OTM160 OTM200
Rated insulation voltage and rated Pollution
operational voltage AC20/DC20 degree 3 V 1000 1000
Dielectric strength 50 Hz 1min. kV 10 10
Rated impulse withstand voltage kV 12 12
Rated thermal current and rated operational / ambient 40C In open air A 160 200
current AC20/DC20 / ambient 40C In enclosure A 160 200
..with minimum conductor cross section Cu mm
2
70 95
Rated operational current, AC-21A up to 415 V A 160 200
Rated operational current, AC-22A up to 415 V A 160 200
Rated operational current, AC-23A up to 415 V A 160 200
Rated breaking capacity in category AC-23 up to 415 V A 1 280 1 600
Rated conditional short-circuit I
p
(r.m.s.) 80 kA, 415 V
c
(peak) kA 40.5 40.5
current I
p
(r.m.s.) and cut-off current
c
(peak) value
2)
Max. OFA_ fuse size gG/aM A/A 355/315 355/315
Rated short-time withstand current I
cw
(r.m.s) 415 V 1s kA 8 8
Rated short-time making capacity
3)
I
cm
(peak)
4)
415 V kA 30 30
Mechanical endurance Number of oper. cycles
1)
Cycles 8 000 8 000
Mechanical endurance / switch Number of operations Oper. 16 000 16 000
Terminal tightening torque Counter torque required Nm 15-22 15-22
Operating torque Typical for 3-pole switches Nm 7 7
Weight without accessories 3-pole switch kg 7.1 7.1
4-pole switch kg 7.7 7.7
Class of equipment PC PC
Rated short-time withstand current I
cw
(r.m.s.) 415 V 0.1s kA 15 15
Rated operational current, AC-31B up to 415 V A 160 200
Rated operational current, AC-33B up to 415 V A 160 200
1)
Operating cycle: O - I - O - II - O
2)
The cut-off current
c
refers to the values listed by fuse manufacturers (single phase test acc. to IEC 60269)
3)
Short circuit duration >50ms, without fuse protection
4)
Max. distance from switch frame to nearest busbar / cable support 150 mm
Automatic transfer switches | Technical data 7
Technical data
Automatic transfer switches
OTM250 OTM315 OTM400 OTM630 OTM800 OTM1000 OTM1250 OTM1600
1000 1000 1000 1000 1000 1000 1000 1000
10 10 10 10 10 10 10 10
12 12 12 12 12 12 12 12
250 315 400 630 800 1000 1000 1000
250 315 400 630 800
120 185 240 2 x 185 2x240 2x300 2x300 2x600
250 315 400 630 800 1000 1250 1600
250 315 400 630 800 1000 1250 1600
250 315 400 630 800 1000 1250 1250
2 000 2 520 3 200 5 040 6 400 10 000 10 000 10 000
40.5 59 59 83.5 83.5 100 100 100
355/315 500/500 500/500 800/1 000 800/1 000 1250/1250 1250/1250 1250/1250
8 15 15 20 20 50 50 50
30 65 65 80 80 92 92 92
8 000 8 000 8 000 5 000 5 000 3 000 3 000 3 000
16 000 16 000 16 000 10 000 10 000 6 000 6 000 6 000
15-22 30-44 30-44 50-75 50-75 50-75 50-75 50-75
7 16 16 27 27 80 80 80
7.1 10.3 10.3 19.1 19.1 43.5 43.5 45.6
7.7 11.5 11.5 21.7 21.7 51.5 51.5 53.6
PC PC PC PC PC PC PC PC
15 25 25 38 38 50 50 50
250 315 400 650 720 1000 1250 1600
250 315 400 650 650 1000 1000 1000
8 Technical data | Automatic transfer switches
Technical data
Automatic transfer switches
Automatic transfer switch, main circuit Value
OTM_C2D_ (OMD200)
Rated operational voltage U
e
208 - 415 V AC +/- 20 % + N
Phase - neutral 120 - 240 V AC +/- 20 %
Rated frequency 50 / 60 Hz +/- 10 %
Rated impulse withstand voltage U
imp
6 kV
OTM_C3D_ (OMD300)
Rated operational voltage U
e
208 - 415 V AC +/- 20 % + N
Phase - neutral 120 - 240 V AC +/- 20 %
Rated frequency 50 / 60 Hz +/- 10 %
Rated impulse withstand voltage U
imp
6 kV
OTM_C8D_ (OMD800)
Rated operational voltage U
e
100 - 415 V AC +/- 20 %
Phase - neutral 57.7 - 240 V AC +/- 20 %
Rated frequency 50 / 60 Hz +/- 10 %
Rated impulse withstand voltage U
imp
6 kV
AUX voltage, if voltage 57.7 - 109 V AC 24 V DC - 110 V DC (-10 to 15 %)
Operating temperature -5+40C
Transportation and storage temperature -40+70C
Altitude Max.2000m
Automatic transfer switch OTM_C_D, power circuit
Automatic transfer switches | Technical data 9
Technical data
Automatic transfer switches
Type Operating transfer time
a)

I - II, II - I [s]
Total transfer time
a) b)
I - II, II - I [s]
OFF-time when operating
a)
I - II, II - I [s]
OTM160250_C_2D230C 2.0 - 4.0 2.0 - 35.0 0.4 - 1.0
OTM160250_C_3D230C 2.0 - 4.0 2.0 - 35.0 0.4 - 1.0
OTM160250_C_8D230C 1.5 - 3.0 1.5 - 35.0 0.4 - 1.0
OTM315400_C_2D230C 2.0 - 5.0 2.0 - 35.0 0.4 - 1.0
OTM315400_C_3D230C 2.0 - 5.0 2.0 - 35.0 0.4 - 1.0
OTM315400_C_8D230C 1.5 - 3.0 1.5 - 35.0 0.4 - 1.0
OTM630800_C_2D230C 2.0 - 5.0 2.0 - 35.0 0.4 - 1.0
OTM630800_C_3D230C 2.0 - 5.0 2.0 - 35.0 0.4 - 1.0
OTM630800_C_8D230C 1.5 - 3.0 1.5 - 35.0 0.4 - 1.0
OTM10001600_C_2D230C 3.0 - 6.0 3.0 - 36.0 0.6 - 1.5
OTM10001600_C_3D230C 3.0 - 6.0 3.0 - 36.0 0.6 - 1.5
OTM10001600_C_8D230C 2.5 - 4.0 2.5 - 35.0 0.6 - 1.5
Operating times
a)
Under nominal conditions
b)
Ts (switching delay) 0s (Min) - Ts 30s (Max)
Motor operator, control circuit
Motor operator, control circuit OTM160250 OTM315400 OTM630800 OTM10001600
Rated operational voltage U [V] Pollution degree 3 50/60 Hz 220 - 240 V AC
Operating voltage range 0,81,2 x U
e
Operating times See the table below
Nominal current I
n

a)
A 0.2 0.5 0.7 1.8
Current Inrush
a)
A 1.3 2.1 2.8 7.7
Overload fuse Type / In / Capacity mA T / 315 / H T / 500 / H T / 1000 / H T / 2000 / H
Size mm 5x20 5x20 5x20 5x20
Operating rate Cycle 0 - I - 0 - II - 0
Max. continuous cycles /
min
1 1 1 1
Max. short-time
10 cycles
cycles /
min
10 10 10 10
Overvoltage category III
Rated impulse withstand voltage U
imp
kV 4
Dielectric strength 50 Hz 1 min. kV 1.5
Terminals
Voltage supply wiring for U PE - N - L
Cross section solid/stranded mm
2
1.5 - 2.5
Short-circuit protection device max.fuse size A 16
State information of locking no SELV
Cross section solid/stranded mm
2
1.5 - 2.5
Handle attached or motor
operator locked
11-12-14 (C/O) 5A/250V/cos=1
Locking motor operator 23-24 (NO) 5A/250V/cos=1
Short-circuit protection device C/2A
10 Ordering information | Automatic transfer switches
Ordering information
Automatic transfer switches
OTM800E4C2D230C
OTM400E4C3D230C
1)
Under nominal conditions
Automatic transfer switches, I - O - II operation, open transition
Including a handle for manual operation, PCB connectors, bolt kit with nuts and washers for all
terminals.
Types OTM1601600_C_D_, including a voltage sensing kit on the top of the switch.
Consult us for types where the voltage sensing kit is on the bottom of the switch.
Types OTM160...250_WC_D_ are equipped with extended phase distance.
Number Rated Rated Rated Type Order number Weight
of current
1)
power current [kg]
poles AC-21A... 400V AC-31B /
AC-22A S[kVA] AC-33B
Up to 415 V Up to 415V
I [A] I [A]
Automatic operation, equipped with OMD200 controller unit
Motor operator voltage U
e
= 220-240 V AC
1)
4 160 110 160/160 OTM160E4C2D230C 1SCA106230R1001 11
4 160 110 160/160 OTM160E4WC2D230C 1SCA101033R1001 11
4 200 135 200/200 OTM200E4C2D230C 1SCA106671R1001 11
4 200 135 200/200 OTM200E4WC2D230C 1SCA101034R1001 11
4 250 170 250/250 OTM250E4C2D230C 1SCA101016R1001 11
4 250 170 250/250 OTM250E4WC2D230C 1SCA101035R1001 11
4 315 215 315/315 OTM315E4C2D230C 1SCA101059R1001 15
4 400 275 400/400 OTM400E4C2D230C 1SCA101060R1001 15
4 630 435 650/650 OTM630E4C2D230C 1SCA108434R1001 37
4 800 550 720/650 OTM800E4C2D230C 1SCA108439R1001 37
4 1000 680 1000/1000 OTM1000E4C2D230C 1SCA112858R1001 66
4 1250 850 1250/1000 OTM1250E4C2D230C 1SCA112857R1001 66
4 1600 1000 1600/1000 OTM1600E4C2D230C 1SCA112854R1001 70
Automatic operation, equipped with OMD300 controller unit
Including dual power source for the motor operator.
Motor operator voltage U
e
= 220-240 V AC
1)
4 160 110 160/160 OTM160E4C3D230C 1SCA106305R1001 11
4 160 110 160/160 OTM160E4WC3D230C 1SCA106306R1001 11
4 200 135 200/200 OTM200E4C3D230C 1SCA106309R1001 11
4 200 135 200/200 OTM200E4WC3D230C 1SCA106310R1001 11
4 250 170 250/250 OTM250E4C3D230C 1SCA106313R1001 11
4 250 170 250/250 OTM250E4WC3D230C 1SCA106314R1001 11
4 315 215 315/315 OTM315E4C3D230C 1SCA106317R1001 15
4 400 275 400/400 OTM400E4C3D230C 1SCA106318R1001 15
4 630 435 650/650 OTM630E4C3D230C 1SCA108726R1001 37
4 800 550 720/650 OTM800E4C3D230C 1SCA108728R1001 37
4 1000 680 1000/1000 OTM1000E4C3D230C 1SCA112852R1001 66
4 1250 850 1250/1000 OTM1250E4C3D230C 1SCA112851R1001 66
4 1600 1000 1600/1000 OTM1600E4C3D230C 1SCA112848R1001 70
OTM1250E4C3D230C
Automatic transfer switches | Ordering information 11
Ordering information
Automatic transfer switches
OTM250E3C8D230C
OTM400E4C8D230C
Automatic transfer switches, I - O - II operation, open transition
Including a handle for manual operation, PCB connectors, bolt kit with nuts and washers for all
terminals.
Types OTM1601600_C_D_, including a voltage sensing kit on the top of the switch.
Consult us for types where the voltage sensing kit is on the bottom of the switch.
Types OTM160...250_WC_D_ are equipped with extended phase distance.
Number Rated Rated Rated Type Order number Weight
of current
1)
power current [kg]
poles AC-21A... 400V AC-31B /
AC-22A S[kVA] AC-33B
Up to 415 V Up to 415V
I [A] I [A]
Automatic operation, equipped with OMD800 controller unit
Motor operator voltage U
e
= 220-240 V AC
1)
3 160 110 160/160 OTM160E3C8D230C 1SCA101017R1001 10
3 160 110 160/160 OTM160E3WC8D230C 1SCA101036R1001 10
4 160 110 160/160 OTM160E4C8D230C 1SCA101020R1001 11
4 160 110 160/160 OTM160E4WC8D230C 1SCA101039R1001 11
3 200 135 200/200 OTM200E3C8D230C 1SCA101018R1001 10
3 200 135 200/200 OTM200E3WC8D230C 1SCA101037R1001 10
4 200 135 200/200 OTM200E4C8D230C 1SCA101021R1001 11
4 200 135 200/200 OTM200E4WC8D230C 1SCA101040R1001 11
3 250 170 250/250 OTM250E3C8D230C 1SCA101019R1001 10
3 250 170 250/250 OTM250E3WC8D230C 1SCA101038R1001 10
4 250 170 250/250 OTM250E4C8D230C 1SCA101022R1001 11
4 250 170 250/250 OTM250E4WC8D230C 1SCA101041R1001 11
3 315 215 315/315 OTM315E3C8D230C 1SCA101062R1001 14
4 315 215 315/315 OTM315E4C8D230C 1SCA101063R1001 15
3 400 275 400/400 OTM400E3C8D230C 1SCA101061R1001 14
4 400 275 400/400 OTM400E4C8D230C 1SCA101064R1001 15
3 630 435 650/650 OTM630E3C8D230C 1SCA108452R1001 34
4 630 435 650/650 OTM630E4C8D230C 1SCA108453R1001 37
3 800 550 720/650 OTM800E3C8D230C 1SCA108454R1001 34
4 800 550 720/650 OTM800E4C8D230C 1SCA108455R1001 37
3 1000 680 1000/1000 OTM1000E3C8D230C 1SCA112868R1001 57
4 1000 680 1000/1000 OTM1000E4C8D230C 1SCA112861R1001 66
3 1250 850 1250/1000 OTM1250E3C8D230C 1SCA112862R1001 57
4 1250 850 1250/1000 OTM1250E4C8D230C 1SCA112864R1001 66
3 1600 1000 1600/1000 OTM1600E3C8D230C 1SCA112866R1001 60
4 1600 1000 1600/1000 OTM1600E4C8D230C 1SCA112867R1001 70
OTM1600E3C8D230C
1)
Under nominal conditions
12 Dimension drawings | Automatic transfer switches
Automatic transfer switches
Dimension drawings
OTM160-250E_C_2D_, OTM160-250E_C_3D_
OTM160-250E_C_8D_
Automatic transfer switches | Dimension drawings 13
Automatic transfer switches
Dimension drawings
OTM160-250E_CW_2D_, OTM160-250E_CW_3D_
OTM160-250E_CW_8D_
OTM315-400E_C_2D_, OTM315-400E_C_3D
14 Dimension drawings | Automatic transfer switches
Automatic transfer switches
Dimension drawings
OTM315-400E_C_8D_
Automatic transfer switches | Dimension drawings 15
Automatic transfer switches
Dimension drawings
OTM630-800E_C_2D_, OTM630-800E_C_3D_
OTM630-800E_C_8D_
16 Dimension drawings | Automatic transfer switches
Automatic transfer switches
Dimension drawings
OTM1000-1250E_C2D_, OTM1000-1250E_C3D_
OTM1000-1250E_C_8D
Automatic transfer switches | Dimension drawings 17
Automatic transfer switches
Dimension drawings
OTM1600E_C2D_, OTM1600E_C3D_
OTM1600E_C8D_
18 Dimension drawings | Automatic transfer switches
Automatic transfer switches
Dimension drawings
Notes

Contact us
ABB Oy
Low Voltage Products
P.O. Box 622
FI-65101 Vaasa, Finland
Phone: +358 10 22 11
Fax: +358 22 45708
E-Mail: firstname.surname@fi.abb.com
www.abb.com
C
a
t
a
l
o
g
u
e

O
T
C
2
G
B

0
9
-
1
0
,

1
S
C
C
3
0
3
0
0
1
B
0
2
0
1 The technical data and dimensions are valid at the time of
printing. We reserve the right to subsequent alterations.
L
a
y
o
u
t

a
n
d

i
l
l
u
s
t
r
a
t
i
o
n
s
:

K
A
T
A
N
N

D
o
c
u
m
e
n
t

F
a
c
t
o
r
y

O
y
,

V
a
a
s
a
,

F
i
n
l
a
n
d

You might also like