Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
73 views

St. Peter'S University: Design and Analysis of Knuckle Joint

This document is a project report submitted by Harsha Vardhan Punna S to St. Peter's University in partial fulfillment of the requirements for a Master of Engineering degree in CAD/CAM Engineering. The project report is about the design and analysis of a knuckle joint. It has been certified by Harsha Vardhan Punna S's project guide and the head of the Mechanical Engineering department that the work is original and has not been submitted elsewhere for another degree.

Uploaded by

Sapari Vel
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
73 views

St. Peter'S University: Design and Analysis of Knuckle Joint

This document is a project report submitted by Harsha Vardhan Punna S to St. Peter's University in partial fulfillment of the requirements for a Master of Engineering degree in CAD/CAM Engineering. The project report is about the design and analysis of a knuckle joint. It has been certified by Harsha Vardhan Punna S's project guide and the head of the Mechanical Engineering department that the work is original and has not been submitted elsewhere for another degree.

Uploaded by

Sapari Vel
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

St.

PETERS UNIVERSITY
St. Peters Institute of Higher Education and Research
(Declared under section 3 of the UGC Act 1956)
AVADI, CHENNAI 600 054, TAMIL NADU

DESIGN AND ANALYSIS OF KNUCKLE JOINT


by

HARSHA VARDHAN PUNNA S


(SP15CCP002)
A project report submitted to the

FACULTY OF MECHANICAL ENGINEERING


In partial fulfillment for the requirements for the award of the degree
of

MASTER OF ENGINEERING
in

CAD/CAM ENGINEERING

St. PETERS UNIVERSITY


St. Peters Institute of Higher Education and Research
(Declared under section 3 of the UGC Act 1956)
AVADI, CHENNAI 600 054, TAMIL NADU

BONAFIDE CERTIFICATE
NAME
YEAR
SEMESTER
BRANCH

:
:
:
:

HARSHA VARDHAN PUNNA S


I YEAR
II
M.E CAD/CAM

UNIVERSITY REGISTER No: SP15CCP002


Certified that this project report of DESIGN AND ANALYSIS OF
KNUCKLEJOINT is the bonafide work of HARSHA VARDHAN PUNNA S
(SP15CCP002) who carried out the research under my supervision. Certified
further, that to the best of my knowledge the work reported herein does not form
part of any other project report or dissertation on the basis of which a degree or
award was conferred on an earlier occasion on this or any other candidate.

Signature of Project Guide

Signature of Head of Dept

Submitted to the practical Examination held on 15/04/2016 at St. PETERS


UNIVERSITY

Internal Examiner

External Examiner

You might also like