Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Timing Belt Adjustments - 2006 Kia Spectra

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

2006 Kia Spectra L4-2.

0L

Copyright 2009, ALLDATA

Timing Belt: Adjustments

TIMING BELT TENSION ADJUSTMENT


1. Remove the engine cover.

2. Remove the RH front wheel.


3. Remove the bolts (B) and RH side cover (A).

4. Loosen the water pump pulley bolts.

5.
6.
7.
8.
9.

Remove the alternator drive belt.


Remove the air conditioner compressor drive belt.
Remove the power steering pump drive belt.
Remove the water pump pulley.
Remove the 4 bolts (B) and timing belt upper cover (A).

10.50PE

Page 1

2006 Kia Spectra L4-2.0L

Copyright 2009, ALLDATA

10.50PE

Page 2

10. Turn the crankshaft pulley, and align its groove with timing mark T of the timing belt cover. Check that the timing mark of camshaft sprocket is
aligned with the timing mark of cylinder head cover. (No.1 cylinder compression TDC position).

11. Remove the crankshaft pulley bolt (B) and crankshaft pulley (A).

12. Remove the 5 bolts (B) and timing belt lower cover (A).

2006 Kia Spectra L4-2.0L

Copyright 2009, ALLDATA

10.50PE

Page 3

13. Temporarily loosen the tensioner pulley (A) by center bolt.

14. Adjust the timing belt tension.


1) Rotate the crankshaft clockwise (view from the front) through angle equivalent to two teeth (18) of camshaft sprocket (A).

2) Using a hex-wrench, apply tension to the timing belt in the counterclockwise direction so that there is no slack in the belt on the tension side.

3) Tighten the tensioner bolt.


Tightening torque: 42.2 - 53.9 Nm (4.3 - 5.5 kg-m, 31.1 - 39.8 ft. lbs.)
4) Recheck the belt tension. When applying about 5 lbs of force, the belt should move no more than 0.16 to 0.24 inch (4 to 6 mm).

2006 Kia Spectra L4-2.0L

Copyright 2009, ALLDATA

10.50PE

Page 4

15. Turn the crankshaft two turns in the operating direction (clockwise) and realign the crankshaft sprocket and camshaft sprocket timing mark.
16. Install the timing belt lower cover (A) with bolts (B).

17. Install the crankshaft pulley (A) with bolt (B).

18. Install the timing belt upper cover (A) with bolts (B).

19.
20.
21.
22.
23.

Install the water pump pulley.


Install the power steering pump drive belt.
Install the air conditioner compressor drive belt.
Install the alternator drive belt.
Install the RH side cover (A) with bolts (B)

24. Install the RH front wheel.

2006 Kia Spectra L4-2.0L

Copyright 2009, ALLDATA

10.50PE

Tightening torque: 88.3 - 107.9 Nm (9 - 11 kg-m, 65.1 - 79.6 ft. lbs.)


25. Install the engine cover (A) with bolts.

Page 5

You might also like