Jan W. Gooch, Biosketch - Jan. 2015
Jan W. Gooch, Biosketch - Jan. 2015
Jan W. Gooch, Biosketch - Jan. 2015
Education
Doctor of Philosophy, Polymer Science and Engineering
University of Southern Mississippi
Master of Science Degree (non-degree graduate work)
University of Arkansas
May 1980
June 1971
Additional Education
Clinical Practices Food & Drug Administration Course at
US Army Institute of Surgical Research, Fort Sam Houston,
Texas
July 2003
September 1979
Employment History
Chief Scientist - Consultant
Water Visions International, Inc.
Atlanta, Georgia
Page 2
Biographical Sketch
Experience Summary
At the US Army Institute of Surgical Research, I developed: Liquid and powder dressings for
wounds using emulsions and basic polymer science and engineering expertise; photopolymerizable tissue and blood vessel adhesives; and automatic tourniquets for wear in a combat
uniform providing the solider with self-tourniqueting capability of upper- and lower-limbs. At
Georgia Tech, I founded and managed the Polymer & Coatings Program within the ElectroOptics, Environmental & Materials Laboratory, conducted research and development in
fundamental and applied polymer science and coatings technology. With Cook Paint & Varnish,
performed and supervised research and development of resins for industrial coatings and fiberglass composites including synthesis, pilot plant, production, and testing phases. At Bechtel
Group, Inc., I provided technical services internationally in areas of industrial coatings, polymers
and composite materials. At the University of Southern Mississippi, conducted graduate
research involving polymer synthesis, characterization, kinetics studies,viscometry and coating
formulations. As Technical Director with Wrape Enterprises, performed research and
development in industrial air and water pollution control systems including pilot and prototype
designs.
Current Fields of Interest
I am conducting research in biomedical materials including dressings for wounds, broad
spectrum antimicrobial and biocompatible emulsions, and lightweight automatic tourniquets for
casualty-care programs. .Electroactive polymers; thin film liquid crystal displays; plasma
polymerization, metal and other vapor deposition/sputtering; manufacture and testing of plastic
containers including PET bottles; polymer-solvent intermolecular reactions; design and testing of
plastic and composite materials; low volatile organic content (VOC) coatings including flameless
and plasma spray, water-borne and high solids coatings for corrosion protection of metal
Page 3
Biographical Sketch
Page 4
Biographical Sketch
April 9, 2002, F. Joseph Schork, Jan W. Gooch, Gary W. Poehlein, Shou-Ting Wang.
Air Cleaner Having as Three Dimensional Visco-Elastic Matrix of Material," U.S. Patent
5,529,609, June 25, 1996, with Charlene Bayer.
"Plastic Bottle Stress Analyzer," U.S. Patent No. 5,305,081, April 19, 1994, with
James W. Larsen.
"Magnetic Tape Coatings Using Trioxane, U.S. Patent No. 4977021, 1990.
"A Process of Generating Coatings by Autoxidatively Polymerizing Emulsified Oils and
Alkyds," U.S. Patent 4,419,139 (1983), with B. G. Bufkins and G. C. Wildman.
"A Process of Nucleating and Collecting Dust Particles by Injecting Aerosolized Liquids in
an Air Stream, U.S. Patent No. 3,993,460 (1976), with A. J. Wrape, Jr.
Process for Extracting Organic Waste from Industrial Effluent by Treatment with Dissolved
Ammonia," U.S. Patent No. 3,803,290 (1973).
"A Process for Agglomerating and Coagulating Waste Material," (1971); initially filed 1968,
under same title: U.S. Patent No. 3,586,627 and 3,733,269; Mexico 109,571; Canada
905,027; Great Britain 1,259,821; Australia 417,206, with P. P. Paladino.
Liquid Dressing from Polymeric Miniemulsions for Protection of Wounds, patent pending.
Algorithm Based Tourniquet for Protection of Wounded, J. W. Gooch, Georgia Institute of
Technology, patent pending,
A Process of Preparing Porous Polymeric Membranes Using Trioxane, with J. W. Gooch
and J. D. Shutt, Georgia Institute of Technology, patent pending,
Books and Chapters
ENCYCLOPEDIC DICTIONARY OF POLYMERS, 2nd Edition, Springer, New York, 2010
BIOCOMPATIBLE POLYMERIC MATERIALS AND TOURNIQUETS FOR WOUNDS,
Springer Publishing Company, New York, 2010.
ENCYCLOPEDIC DICTIONARY OF POLYMERS, Springer Publishing Company, New York,
2007.
ELECTROMATIC SHIELDING AND CORROSION OF AIRCRAFT, Springer-Verlag,
New York, 2007.
EMULSIFICATION & POLYMERIZATION OF ALKYD RESINS, Kluwer/Plenum,
New York, 2001.
Page 5
Biographical Sketch
Page 6
Biographical Sketch
Synthesis of Acrylic Copolymer Contact Lens, Ciba Vision Corporation, Johns Creek Georgia
Division, Jan W. Gooch. 2011, Confidential Report.
Hybrid Miniemulsion Polymerization of Acrylic/Alkyd Systems and Characterization of the
Resulting Polymers, Journal of Applied Polymer Science, November 1999, X.Q. Wu, F.J. Schork
and J.W. Gooch.
Novel Water-Borne Coatings via Hybrid Miniemulsion Polymerization, ACS Symposium
Series, H. Dong, J.W. Gooch, J.F. Schork, G. W.,Poehlein, G.W., Wang,, S.T., X. and Wu.,
2000.
Water-Based Polyester/Acrylic Miniemulsion Polymerization, 3rd Annual Green Chemistry
and Engineering Conference, Washington, D. C., June 29-July 1, 1999, J.G. Tsavalas, J.W.
Gooch and F. J. Schork.
Acrylic-Polyester Graft Copolymers Via Hybrid Miniemulsion Polymerization, International
Symposium on Polymers in Dispersed Media, Lyon, France, April 11-15, 1999, J. G. Tsavalas,
J.W. Gooch and F.J. Schork.
Water-Based Crosslinkable Coatings via Miniemulsion Polymerization of Acrylic Monomers in
the Presence of Unsaturated Polyester Resin, Journal of Applied Polymer Science, J.G.Tsavalas,
J.F. Schork and J.W. Gooch , 1999.
Hydrogel Air Cleaning Technology, Sponsored by Georgia Tech - Advanced Technology
Development Center, Contract C-4400-001, Final Report, July 7, 1998, Charlene Bayer and J.
W. Gooch.
Water-Borne Oil Modified Polyurethane Coatings via Hybrid Miniemulsion Polymerization,
Journal of Applied Polymer Science, September 1998, Joseph Schork and J.W. Gooch.
Conductive Polymers for Electromagnetic Shielding of Telecommunications Cables, Lucent
Technologies, Inc., Omaha, Nebraska, September 23, 1997, J.W. Gooch, J. D. Daher and J.W.
Larsen.
"Emulsion and Miniemulsion Copolymerization of Acrylic Monomers in the Presence of Alkyd
Resin," Journal of Applied Polymer Science, Vol. 60, 2069-2076 (1996), S.T. Wang, F. J.
Schork, G. W. Poehlein and J. W. Gooch, June, 1996.
"Evaluation and Improved Herbicide Coatings on Fertilizer", prepared for Gold Kist, Inc., P&CC
Report April 11, 1995.
"Hydrogel Air Cleaner," Prepared for S. C. Johnson Company, Georgia Tech Research Institute
contract no. A9350, December 1994, with Charlene Bayer.
Page 7
Biographical Sketch
"Environmental Compliant Thermoplastic Powder Coatings," Prepared for Warner Robins Air
Logistic Center, Government Contract No. F0603-90-D-2215, SAIC Project No. CN-04,
consultant with Douglas Neale et al., March 31, 1992,
"Evaluation of Vacuum Blasting and Heat Guns as Methods for Abating Lead-Based Paint on
Buildings," GTRI report, U. S. Army Construction Engineering Research Laboratory Technical
Report, May 1992, with Susan Drozdz.
"Project 306 , Low Observable Materials," Final Report (GTRI A-8274) for AAI Corporation, 21
February 1992.
"Evaluation of EMP/EMI Requirement Versus Corrosion Prevention Methods," Final Report
(GTRI A-8245) for Warner Robins Air Logistics Center, U. S. Government Contract F09603-88R-2808, 23 January 1992, with John H. Daher.
"Evaluate and Document Lead Paint Abatement, Final Report (GTRI A-8905) for U.S. Army
Construction Engineering Research Laboratory, U.S. Government Contract DACA88-90-000600 08, 26 August 1991.
"Preparation of Emulsions for Protection of Skin from Irritant Materials," Final Report (GTRI A8669), Schippman Research Corporation, 1 August 1990.
"Lead Paint Investigation," Final Report (GTRI A-8743) for U.S. Army Construction
Engineering Research Laboratory, U.S. Government Contract DACA88-90-D-0006-0005, 9
November 1990.
"Pressure Sensor for Computer Assisted Orthopedic Diagnosis and Treatment," Final Report
(GTRI A-8474) for A.C. Brown, M.D., 11 June 1990.
"Environmental Low VOC Alkyd Coatings," Georgia Journal of Science, Vol. 48, No. 4, March
1991.
"Measurements of the Optical Properties of the Smoke Emissions from Plastics, Hydrocarbons,
and other Urban Fuels for Nuclear Winter Studies," Atmospheric Environment, Vol. 25, No. 11,
1991, with E.M. Patterson, R.M. Duckworth, C.M. Wyman, and E.A. Powell.
"Tactile Sensor Development," Final Report, GTRI Project B-662, July 1989, coauthor.
"Development of Novel Membranes Formed from Trioxane/Polymer Solution," Final Report,
GTRI Project A-8186, April 1989, coauthor.
"Development of Magnetic Coatings Using Trioxane," Final Report, GTRI Project A8018 (Part
B), March 1989, coauthor.
"Development of Improved Correctable Typewriter Ribbon Coatings," Project A-8036, prepared
for the Triumph-Adler Roytype Corporation, February 1988.
Page 8
Biographical Sketch
Page 9
Biographical Sketch
"Solar Dynamic Dish Concentrator (NASA Space Station): Materials Testing and Evaluation,"
GTRI Project A-4393, Final Report, prepared for the Harris Corporation, March 1986, coauthor.
"Electrostatic Spraying of High Solids Coatings," Final Report, GIT Project H900-802, prepared
for Roper Equipment Company, Savannah, Georgia, 14 January 1986.
"A Mechanistic Approach Toward a Model for Predicting Effects of Chemical Agents on
Aircraft Materials," GTRI Project No. A-4215, Final Report, prepared for the Lockheed-Georgia
Company, December 1985, with Garth Freeman, and Lois Speaker.
"Magnetic Coatings: Failure Analysis," Final Report, GIT Project No. H10-405, for CBS
Records, Carrolton, Georgia, November 1985.
"Investigation of Acrylonitrile-Butadiene-Styrene Resins for Manufacture of Plastic Pipe,"
Georgia Tech Project A-4300, Final Report prepared for Slocomb Pipe Company of Atlanta,
Georgia, 21 October 1985.
"Thermal Techniques for Service Evaluation of Polymer and Coating Materials," presented at the
14th Annual Conference, North American Thermal Analysis Society, San Francisco, California,
September 1985.
"Dewaxing, Slurry Adhesion and Inclusion Identification in Investment Molding," Georgia Tech
Project A-3773, Final Report, TRW Corporation, Douglas, Georgia, July 1985, coauthor.
"Testing of Polymeric Films and Resins," Final Report, Gateway Plastics Company, Doraville,
Georgia, June 1985.
"Multispectral Camouflage Cloth Design for Personnel and Fabric Structures," Final Report,
Georgia Tech Project A-3688, prepared for U.S. Army Natick Research and Development
Laboratory, Natick, Massachusetts, January 1985, coauthor.
"Evaluation of Crumpled Thin Films for TREESS Application, and Thin Films for Reflecting
Thermal Infrared for TREESS," Final Report, U.S. Army Mobility Equipment Research and
Development Command Procurement and Production Directorate, Ft. Belvoir, Virginia, April
1984, with T.B. Wells, J.P. Montgomery, and T.L. Starr.
"Autoxidative Crosslinking of Vegetable Oils and Alkyd Emulsions," Journal of Coatings
Technology 56, No. 711 (April 1984), with G. C. Wildman and B. G. Bufkin.
"Thermal Analysis of Coatings," Proceedings of the Practical Thermal Analysis Symposium,
Society of Plastics Engineers (19 March 1984), Georgia Institute of Technology.
"Studies of Magnetic Particle Dispersion Mechanisms," GIT Project No. A-4, Final Report
prepared for TDK Electronics Co., Ltd. of Tokyo, Japan, December 198 with B. R. Livesay.
Page 10
Biographical Sketch
"Field Microscopy for Improved Inspection of Cleaned and Coated Steel," Proceedings of the
3rd World Congress - Coatings Systems for Bridges and Steel Structures (2-3 November 1983),
St. Louis, Missouri.
"Evaluation of an Acrylate Based Pipe Thread Sealant," Materials Performance 20 (1981).
"Evaluation of Coating Removal Methods from Contaminated Surfaces for Three Mile Island
Nuclear Power Plant, Pennsylvania," Internal Report prepared for Bechtel Corporation,
September 1979.
"Survey of Water Chemistry at Arkansas Navigational System Lock and Dams," Department of
Chemistry, Arkansas Polytechnic College Library, 1971.
Major Presentations
Evolution of Coatings: Biobased to Biocompatible, Technical Focus Speaker, presented at the
American Coatings Association, Chicago, Il, March 16, 2011.
Biocompatible Miniemulsions for Wounds, presented at the 2010 Waterborne Symposium,
New Orleans, Lousianna, Feb. 10-12, 2010.
Biocompatible Polymeric Materials for Wounds, presented at the Polymers Teaching and
Research Center, Georgia Institute of Technology, Nov. 2009.
One-Hand and Automatic Occlusion Pressure Tourniquets for the Battlefield, presented at the
NATO Combat Casualty Care in Ground-Based Trauma Situations: Trauma Technology and
Emergency Medical Procedures, Tampa Florida, August 2004.
A New Barrier Dressing Formulation for Field Application, presented at the Advanced
Technology Applications for Combat Casualty Care Research Programs, For Detrick,
Maryland 21702-5012, Jan W. Gooch, Dvid G. Baer and Albert T. McManus.
Prototype Pneumatic Tourniquet System for Battlefield Use, presented at the
AdvanceTechnology Applications for Combat Casualty Care, August 2003, sponsored by the the
Casualty Research Program, Fort Detrick, Maryland 21702-5012, Jan W. Gooch, Thomas
Walters, and Albert T. McManus.
Polymeric Powder Applied Powder Dressing for Wounds, presented at the Advanced
Technology Applications for Combat Casualty Care, September 2002, sponsored by the the
Casualty Care Research Program, Fort Detrick, Maryland 21702-5012, Jan W. Gooch, David G.
Baer and Albert T. McManus.
Algorithm Based Tourniquet (Automatic), presented at the the Advanced
Page 11
Biographical Sketch
Technology Applications for Combat Casualty Care, September 2002, sponsored by the
Casualty Care Research Program, Fort Detrick, Maryland 21702-5012, Jan W. Gooch, Thomas
Walters and Albert T. McManus.
Imaging of Luminescent Bacteria in a Model of Wound Infection for the Evaluation of
Antimicrobials for Combat Casualty Care, presented at the Advanced Technology for Combat
Casualty Care, September 2001, sponsored by the Combat Casualty Care Program, Fort Detrick,
Maryland 21702-5012, David G. Baer, Jan W. Gooch and Albert T. McManus.
Novel Strategies for Sutureless Wound Repair, presented at the Advanced Technology
for Combat Casualty Care, September 2001, sponsored by the Combat Casualty Care Program,
Fort Detrick, Maryland 21702-5012, K. W. Ryan, J. W. Gooch and A. T. McManus.
Water-Based Polyester/Acrylic Coatings via Hybrid Minemulsion Polymerization, 3rd
Annual Green Chemistry and Engineering Conference, Washington, D.C., June 29-July 1,
1999, J.G. Tsavalas, J.W. Gooch and F.J. Schork..
Graft Coplymers for Water-Borne Coatings Applications via Hybrid Miniemulsion
Polymerization, 6th Annual Workshop on Polymer Reaction Engineering, Berlin, Germany,
October 5-7, 1998, H. Dong, J.W. Gooch, M.S. Sinangil, J.G. Tsavalas, X. Wu and F.J.
Schork..
Preparation of Low VOC Coatings by Grafting Alkyd Resins to Acrylic Copolymer
Emulsions and Miniemulsions, Presented at the 24th Annual International Waterborne,
High-Solids and Powder Coatings Symposium, February 5-7, 1997, New Orleans, Louisiana,
with Joseph Schork, Gary Poehlein and J. Wang.
Low VOC Alkyd Coatings Resins by Miniemulsion Copolymerization, Green Chemistry
and Engineering Conference, June 23-25, 1997, J.W. Gooch, G.W., Poehlein, F.J. Schork
and S.T. Wang.
Novel Low Volatile Organic Content Emulsions and Coatings," in Proceedings of the SixtyEighth Annual Meeting of the Georgia Academy of Science, Augusta, Georgia, 26-27 April
1991, J.W. Gooch.
Low VOC Surfactantless Alkyd Coatings," in Proceeding of the Eighteenth Water-Borne,
Higher-Solids, and Powder Coatings Symposium, 6-8 February 1991, Jan W. Gooch and Ad
Hofland.
"Electromagnetic Shielding and Conductive Sealants," in Proceedings of the G-9
Subcommittee, Society of Automotive Engineers, Aerospace Division, 23 October 1990,
Jan W. Gooch John H. Daher.
"Trioxane in Magnetic Coatings," Proceedings of the 17th Annual Georgia Academy of
Sciences Meeting, Macon, Georgia, (4-5 May 1990)., J.W. Gooch.
Page 12
Biographical Sketch
"Reformulating Coatings in the Aircraft Industry for Volatile Organic Content Compliance,"
Proceedings of the 53rd Annual Meeting of the Southern Society for Coatings Technology,
Tampa, Florida, (5-7 April 1989).
"Conductive Sealants for Electromagnetic Shielding and Corrosion Protection of Aircraft,"
Proceedings of the Symposium on Corrosion and Electromagnetic Interference Shielding in
Aerospace Equipment, New Orleans, Louisiana, (17-21 April 1989), coauthor.
"Low VOC Coatings for the Aerospace Industry," Proceedings of the Water-Borne and
Higher-Solids Coatings Symposium, New Orleans, Louisiana, (February 1989).
"Measurements of the Emissions Properties of Burning Plastic Material for Nuclear Winter
Studies," Proceedings of the 1988 Meeting of the American Association for Aerosol
Research, Chapel Hill, North Carolina, (October 1988), coauthor.
"Compositional Determination of Organic Coatings and Polymers Using Combined
Thermogravimetric and Fourier Transform Infrared Spectroscopy Techniques," Proceedings
of the 17th North American Thermal Analysis Conference, Orlando, Florida, (9-12 October
1988).
"Magnetic Dispersions and Coatings Developments," Proceedings of the Polymers in
Information Storage Technology Symposium, Los Angeles, California, September 1988.
"What is Lead Based Paint?", Proceedings of Lead Based Paint: Identification and Control
Symposium, sponsored by Georgia Tech Research Institute, Atlanta, Georgia (February
1987).
"Alkyd Emulsions and Stabilization Techniques," presented at DSM Resins BV, Zwolle, The
Netherlands, 13 August 1987.
"Conductive Polymeric Matrices for Tactile Sensors," Proceedings of the ANTEC 1988
Conference sponsored by the Society of Plastics Engineers, Atlanta, Georgia,
(18 April
1988), Jan W. Gooch and Paula T. Hammond.
Electrically Resistive Polymeric Tactile Sensors," Proceedings of the American Chemical
Society Regional Meeting, Atlanta, Georgia (10-11 November 1988)
"Polymeric Tactile Sensors," presented at the University of Arkansas, Department of Chemistry,
15 October 1987.
"Optimization of Process Parameters for Investment Cast Molding Using Thermal Analysis,"
Proceedings of the 15th Annual Conference, North American Thermal Analysis Society,
Cincinnati, Ohio (September 1986).
"Processing Emulsified Oils and Alkyds to Generate Polymers," Proceedings of American
Chemical Society National Meeting, Polymer Science & Technology Division 17, New York,
Page 13
Biographical Sketch
Page 14
Biographical Sketch
"Conjuring Up Formulas for Sealants," The New York Times, Sunday, January 3, 1993, p. 9,
with Sana Siwolop.
"Materials Briefs - Conductive Sealants, American Machinist, May 1990, coauthor.
"Conductive Sealants Stop EMI, Fire and Corrosion," Machine Design, 2 April 1990, coauthor.
Corrosion Protection and EMI/EMP Shielding," Aerospace Engineering, June 1990, with John
H. Daher and James H. Brahney.
"Sealants, Ceramics Under Study at Georgia Tech," Advanced Materials and Processes, April
1990, coauthor.
Fish Oil: A Key to Better Coatings," Manufacturing Engineering Magazine, 15 October 1987.
"Tactile Sensors," Robotics World, (September 1987).
"Tactile Sensors Groomed for Robot Hands," Agricultural Engineering, September/October
(1987), coauthor.
"Industry Notes - Sensor Imbedded Polysilicone," SENSORS, September 1987,
coauthor.
"Fish Oil Used in Paint Manufacture," Industry News Section, Modern Paint and Coatings (April
1987).
"New Uses for Fish Oil," American Paint & Coatings Technology, (March 1987).
"Coatings From Fish Oil," Chemical Marketing Reporter (February 1987).
"Field Microscope and Coatings," Coatings Magazine (March 1984), and Corrosion Control
(March 1984), author.
"Elastomeric Conductive Sealant Protect Aircraft from Corrosion," Adhesives Age, Vol. 33, No.
5, pp. (17-20 May 1990), coauthor
"Aircraft Coatings Meet Challenge of VOC Compliance," Modern Paint and Coatings,
(September 1989), pp. 36-38.
"Conductive Sealants," Industry Week, (16 April 1990), p. 63, coauthor.
"Sealants Tested on Aircraft," Advanced Manufacturing Technologies, p. 7, (15 February 1990).
"Aircraft Sealants Could Prevent Corrosion," Chemical and Engineering News, p. 18, (15
January 1990), coauthor.
Page 15
Biographical Sketch
"Sealants, Ceramics Under Study at Georgia Tech, Advanced Materials and Processes, (April
1990), coauthor.
"Conductive Aircraft Sealants," Science Trends Weekly, (January 1990), coauthor.
"Seal Against Corrosion, Fire and Interference," Inside R&D Weekly, (17 January 1990).
Special Aircraft Sealants May Offer Improved Protection Against Corrosion, Fire, and
Electromagnetic Interference," Urethane Plastics and Products Monthly, (March 1990).
"Stuck with Safety in the Air," Financial Times, London, U.K., p. 16, (16 January 1990).
"Seal Against Corrosion, Fire Interference," INSIDE R&D, Vol. 19, No. 3, p. 7, 17 January
1990.
"It's Touch and Go in Robotics," Photonics Product Portfolio, (September 1988), p. 19.
"Robotic Research is Getting Touchy," INSIGHT Magazine, P. 52, (8 August 1988).
"Feeling Robots," OMNI Magazine, P. 34, (July 1988).
"Sensor Could Improve Robot's Touch," Research and Development, (June 1988), P. 3. "In
Quest of the Humanoid Robot," Design News, P. 52, (March 1988).
"Touch Sensitive Pads," presented on WGST News Radio 92, 12 July 1987, with T. Vigodsky.
"Robots That Feel," Science and Medicine Section, The Atlanta Constitution, 16-A (7 July
1987).
"Touch Sensitive Robot," Marietta Daily Journal 5-A (28 June 1987), with C. W. Griffin.
Next, A More Sensitive Breed of Robots," Technology Section, The Wall Street Journal, 21 (26
June 1987), with H. Gilman.
"Robot Gripping Pad," Inside R & D 16, No. 25, 3, Technical Insight, Inc. (24 June 1987), with
R. Consolas.
"Preparation of Standard Coatings for Surface Tension Measurements," invited paper at
Edgewood Arsenal, Chemical Research and Development Center, Maryland, May 1986.