Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 33 views

    Capacitive Sensor BC5-S18-AP4X

    Uploaded by

    mamaligosu1
    The document describes a capacitive sensor with a threaded barrel and plastic housing that can detect electrically conductive and non-conductive metal objects in a non-contact manner. It operates between 10 and 65VDC, has a PNP output, and is rated for an ambient temperature range of -25 to 70 degrees Celsius. Installation and wiring instructions are provided along with minimum spacing requirements and optional accessories.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Capacitive Sensor BC5-S18-AP4X

    Uploaded by

    mamaligosu1
    33 views3 pages
    The document describes a capacitive sensor with a threaded barrel and plastic housing that can detect electrically conductive and non-conductive metal objects in a non-contact manner. It operates between 10 and 65VDC, has a PNP output, and is rated for an ambient temperature range of -25 to 70 degrees Celsius. Installation and wiring instructions are provided along with minimum spacing requirements and optional accessories.

    Original Description:

    senzor

    Original Title

    edb_25030_gbr_en

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a capacitive sensor with a threaded barrel and plastic housing that can detect electrically conductive and non-conductive metal objects in a non-contact manner. It operates between 10 and 65VDC, has a PNP output, and is rated for an ambient temperature range of -25 to 70 degrees Celsius. Installation and wiring instructions are provided along with minimum spacing requirements and optional accessories.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    33 views3 pages

    Capacitive Sensor BC5-S18-AP4X

    Uploaded by

    mamaligosu1
    The document describes a capacitive sensor with a threaded barrel and plastic housing that can detect electrically conductive and non-conductive metal objects in a non-contact manner. It operates between 10 and 65VDC, has a PNP output, and is rated for an ambient temperature range of -25 to 70 degrees Celsius. Installation and wiring instructions are provided along with minimum spacing requirements and optional accessories.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Capacitive sensor

    BC5-S18-AP4X

    Threaded barrel, M18 x 1


    Plastic, PA12-GF30
    Fine adjustment via potentiometer
    DC 3-wire, 1065 VDC
    NO contact, PNP output
    Cable connection
    Wiring Diagram

    Type code
    Ident no.

    BC5-S18-AP4X
    25030

    Rated switching distance (flush)


    Rated switching distance (non-flush)
    Assured switching distance
    Hysteresis
    Temperature drift
    Repeatability
    Ambient temperature

    5 mm
    7.5 mm
    (0.72 x Sn) mm
    220 %
    type 20 %
    2 % of full scale
    -25+70 C

    Operating voltage
    Residual ripple
    DC rated operational current
    No-load current I0
    Residual current
    Switching frequency
    Rated insulation voltage
    Output function
    Short-circuit protection
    Voltage drop at Ie
    Wire breakage / Reverse polarity protection

    10 65VDC
    10 % Uss
    200 mA
    15 mA
    0.1 mA
    0.1 kHz
    0.5 kV
    3-wire, NO contact, PNP
    yes/ cyclic
    1.8 V
    yes/ complete

    Construction
    Dimensions
    Housing material
    Active area material
    Admissible pressure on front cap
    Max. tightening torque housing nut
    Connection
    Cable quality
    Cable cross section

    Threaded barrel, M18 x 1


    74 mm
    Plastic, PA
    Plastic, PA12-GF30, yellow
    6 bar
    2 Nm
    cable
    5.2, LifYY, PVC, 2m

    Vibration resistance
    Shock resistance
    Protection class
    MTTF

    3 x 0.34 mm
    55 Hz (1 mm)
    30 g (11 ms)
    IP67
    1080 years acc. to SN 29500 (Ed. 99) 40 C

    Switching state

    LED yellow

    Functional principle
    Capacitive proximity switches are designed
    for non-contact and wear-free detection of
    electrically conductive as well as non-conductive metal objects.

    Edition 2016-05-14T08:45:31+02:00

    1/3

    Hans Turck GmbH & Co.KG D-45472 Mlheim an der Ruhr Witzlebenstrae 7 Tel. 0208 4952-0 Fax 0208 4952-264 more@turck.com www.turck.com

    Capacitive sensor
    BC5-S18-AP4X

    Mounting instructions / Description

    minimum distances

    Distance D

    36 mm

    Distance W

    15 mm

    Distance S

    27 mm

    Distance G

    30 mm

    Diameter of the active area B

    18 mm

    The given minimum distances have been checked


    against the standard switching distance.
    Should the sensitivity of the sensors be changed via
    potentiometer, the data sheet specifications no longer

    Edition 2016-05-14T08:45:31+02:00

    apply.

    2/3

    Hans Turck GmbH & Co.KG D-45472 Mlheim an der Ruhr Witzlebenstrae 7 Tel. 0208 4952-0 Fax 0208 4952-264 more@turck.com www.turck.com

    Capacitive sensor
    BC5-S18-AP4X

    Accessories
    Type code

    Ident no.

    Description

    BS 18

    69471

    Mounting bracket for threaded barrel devices; material: PA66GF

    BSN 18

    69472

    Fixing clamp; material: PA66-GF

    BST-18B

    6947214

    Fixing clamp for threaded barrel devices, with dead-stop; material: PA6

    MAP-M18

    6950012

    Mounting adapter; material: Polypropylene; sensor replacement with filled container possible (adapter remains in con-

    Edition 2016-05-14T08:45:31+02:00

    tainer during sensor replacement)

    3/3

    Hans Turck GmbH & Co.KG D-45472 Mlheim an der Ruhr Witzlebenstrae 7 Tel. 0208 4952-0 Fax 0208 4952-264 more@turck.com www.turck.com

    You might also like