DVR User Manual PDF

User's installation and operation Manual
Important Safeguards and Warding

Do not place heavy objects on the DVR.
Do not let any solid or liquid fall into or infiltrate the DVR
Please brush printed circuit boards,connectors,fans,machine box and so on regularly.Before the dust
cleaning please switch off the power and unplug it.
Do not disassemble or repair the DVR by yourself.Do not replace the components by yourself.
Environment
Please place and use the DVR between 0 and 40.Avoid direct sunlight.Stay away from heat source.
Do not install the DVR in the damp environment.
Do not use the DVR in smoky or dusty environment.
Avoid collision or strong fall.
Please insure the DVR level installation in a stable workplace.
Please install in ventilated place.Keep the vent clean.
Use within the rating input and output scope.
Directory
1 Production Introduction........................................................................................................................................ 4
1.1 Product overview....................................................................................................................................... 4
1.2 Main functions............................................................................................................................................ 4
2 Open-package check and cable connections...................................................................................................5
2.1 Open-package check................................................................................................................................ 5
2.2 Hard disk installation................................................................................................................................. 7
2.3 Frame installation...................................................................................................................................... 7
2.4 Front panel............................................................................................................................................... 10
2.5 Rear panel................................................................................................................................................ 10
2.6 Audion and video inprut and output connections................................................................................17
2.6.1 Video input connections.............................................................................................................. 17
2.6.2 Video output connctions asn options........................................................................................ 17
2.6.3 SDI video input............................................................................................................................. 18
2.6.4 Audion signal input.......................................................................................................................18
2.6.5 Audion signal output.................................................................................................................... 18
2.7 Alarm input and output connections..................................................................................................... 18
2.7.1 Alarm input port specification..................................................................................................... 20
2.7.2 Alarm output port specification................................................................................................... 21
1
2.7.3 Alarm output port relay parameters........................................................................................... 21

2.8 Speed dome connections.......................................................................................................................21
3 Basic operation................................................................................................................................................... 22
3.1 Turn on...................................................................................................................................................... 22
3.2 Turn off...................................................................................................................................................... 23
3.3 System login.............................................................................................................................................23
3.4 Preview..................................................................................................................................................... 24
3.5 Desktop shortcut menu...........................................................................................................................24
3.5.1 Main menu.....................................................................................................................................25
3.5.2 Playback........................................................................................................................................ 26
3.5.3 Record control.............................................................................................................................. 27
3.5.4 Alarm output..................................................................................................................................28
3.5.5 PTZ comtrol...................................................................................................................................29
3.5.6 Color setting..................................................................................................................................34
3.5.7 Output adjust.................................................................................................................................35
3.5.8 Logout............................................................................................................................................ 35
3.5.9 Window switch.............................................................................................................................. 36
3.6.0 Spot................................................................................................................................................ 36
4 Main menu........................................................................................................................................................... 38
4.1 Main menu navigation.............................................................................................................................38
4.2 Record.......................................................................................................................................................41
4.2.1 Record Config...............................................................................................................................41
4.2.2 Playback........................................................................................................................................ 42
4.2.3 Backup........................................................................................................................................... 42
4.24 Snapshot............................................................................................................................44
4.3 Alarm......................................................................................................................................................... 45
4.3.1 Motion Detect................................................................................................................................45
4.3.2 Video Blind.................................................................................................................................... 48
4.3.3 Video Loss.....................................................................................................................................50
4.3.4 Alarm input.................................................................................................................................... 51
4.3.5 Alarm output..................................................................................................................................53
4.3.6 Abnormal....................................................................................................................................... 53
4.3.7 Intelligent analysis........................................................................................................................53
4.4 System...................................................................................................................................................... 56
4.4.1 General.......................................................................................................................................... 57
4.4.2 Encode...........................................................................................................................................59
4.4.3 Network..........................................................................................................................................61
4.4.4 NetSevice...................................................................................................................................... 62
4.4.5 GUI Display................................................................................................................................... 71
4.4.6 PTZ/RS485................................................................................................................................... 72
4.4.7 RS232............................................................................................................................................ 74
4.4.8 Tour.................................................................................................................................................75
4.4.9 Spot Set......................................................................................................................................... 76
4.5.0 Digital............................................................................................................................................. 76
4.5 Advanced.................................................................................................................................................. 82
4.5.1 HDD Manage................................................................................................................................ 82
2
4.5.2 Account.......................................................................................................................................... 82
4.5.3 Online user....................................................................................................................................85
4.5.4 Output adjust.................................................................................................................................86
4.5.5 Auto maintain................................................................................................................................ 86
4.5.6 Restore.......................................................................................................................................... 86
4.5.7 Upgrade......................................................................................................................................... 87
4.5.8 Device Info.................................................................................................................................... 87
4.5.9 Import/Output................................................................................................................................ 87
4.6 Info.............................................................................................................................................................88
4.6.1 HDD info........................................................................................................................................ 88
4.6.2 BPS................................................................................................................................................ 89
4.6.3 Log..................................................................................................................................................89
4.6.4 Version........................................................................................................................................... 90
4.7 Shut down system................................................................................................................................... 90
5 XM cloud basic operation.................................................................................................................................. 91
6 FAQ and maintenance....................................................................................................................................... 96
6.1 FAQ............................................................................................................................................................96
6.2 Maintenance.......................................................................................................................................... 102
Appendix 1.Remote controller operation..........................................................................................................103
Appendix 2.Mouse operation............................................................................................................................. 104
Appendix 3.Hard Disk capacity calculation......................................................................................................105
1 Production Introduction
1.1 Product overview
The series DVR is designed specially for security and defence field which is an outstanding digital
surveillance product. It introduces embedded LINUX operating system which is more stable. It introduces
standard H.264mp video compressed format and G.711A audio compressed format which insures the
high quality image, low error coding ratio and single frame playing. It introduces TCP/IP network
technology which achieves the strong network communication ability and telecommunication ability.
The series DVR can be used individually or online applied as a part of a safety surveillance network.
With the professional network video surveillance software it achieves the strong network communication
ability and telecommunication ability.
The series DVR can be applied in the bank, telecom, electric power system, judicial system,
transportation, intelligent housing, factory, storehouse, water conservancy and so on.
1.2 Main functions

Real-time surveillance
spot interface analog interface VGA interface and HDMI interface surveillance function through
monitor or display.
Storage
non-working hard disk dormancy processing which is convenient to radiate heat, reduce power and
extend the
life-span
special storage format which insures the data safety

Compression
real-time compression by individual hard disk which insures the audio and video signal stable
synchronization
Backup
through SATA interface and USB interface such as USB equipment, removable hard disk and so on
through net download the files in the hard disk
Playback
4
individual real-time video recording as well as searching, playback, network surveillance, recording
check, downloading and so on
multi-playback mode
zoom at arbitrary region
Net operating
through net tele-surveillance in the real time
tele-PTZ control
tele-recording check and real-time playback
ge
Alarm linka
linkage
Alarm activated video record,tour ,message,buzzer,e-mail,ftp
Communication interface
RS485 interface which fulfills the alarm input and PTZ control
RS232 interface which can extend keyboard connection to realize master,as well as with computer
serial port connection for system maintenance and upgrade,and matrix control and so on.
standard ethernet network interface which fulfills the telecommuting function
Intelligent operating
mouse action function
fast copy and paste operating for the same setting
2 Open-package check and cable connections

2.1 Open-package check
When you receive the DVR, please check first
First, please check whether there is any visible damage to the package appearance.he protective
materials used for the package of the DVR can protect most accidental clashes during transportation.
Then, please open the box and get rid off the plastic protective materials. Check whether there is
any visible damage to the DVR appearance.
At last, please open the machine crust and check the data wire in the front panel, power wire, the
connection between the fan power and the main board.
Front panel and rear panel

1.
1.Front
5
The key function specification in the front panel and the interface specification in the real panel
are in the specification.
Please check the product type in the front panel whether is accordant with the product type you
order.
The label in the real panel is very important for the after service. Please protect it carefully. When
you contact us for after service, please provide the product type and serial number in the label.
Check
2.
2.Check
After open the cover,you should check if it has obvious damage trace,also please check the front
panel data cable,power cord and motherboard's connection are loose or not.
2.2 Hard disk installation

For the first use,please install the hard disk,this machine box can install two hard disk(no limited
capacity).
disassemble the screw
fix the screw of hard disk
cover the machine
disassemble the cover
connect the data wire
fix the cover
fix the screw of hard disk
connect the power wire
2.3 Shelf installation

This product chassis specification for the standard 1u,so it can be installed in the standard shelf.
Installation steps and attention items:
1Make sure the temperature in the room lower then 35 (95f).
2Keep the equipment have 15cm(6 inches)space around in order to air's circulation.
3From bottom to shelf installation.
4When multiple components install in the frameplease take preventive measures to avoid power
socket overload..
2.4 Front panel

The front panel of T series
(1) Power indicator light
(2) Record indicator light
(3)Alarm indicator light
(4) ESC
(5) Menu
(6)Direction &Enter
The front panel of A series
(1) Power switch
(2)Menu
(3) Direction
(4) ESC
(5)Power indicator light (6) Record indicator light (7)HDD indicator light (8) IR remote receiver
The front panel of C series
(1) Shift indicator light
(2) System indicator light
(3) Alarm indicator

light
(5) Outside operation

indicator light
(6) network indicator light
(7)HDD indicator light (8) Next File
(9)
(10) Play Pause
Fast Play
(11) Next Frame
(13) Function Switching (14) Direction&Enter
(4) Record indicator

light
(12)Record
(15) IR remote receiver (16) Previous File
(17) Slow Play
(18) Backwards Pause (19) Previous Frame
(21) ESC
(22) Power switch
(20) Play
(23) USB
The front panel of E series
(1) Power indicator light

(5) Record
light
(2)
Shift indicator light (3)
System operation (4)

indicator light
Alarm
light
indicator
indicator (6)
Outside operation (7)

indicator light
Network indicator (8)

light
HDD indicator light
(9) Function switch
(10) Direction&Enter
(11) ESC
(12) Power switch
(13) Previous File
(14) Next File
(15) Slow Play
(16) Fast Play
(17) Backward Pause
(18) Play Pause
(19) 7
(20) 8
(21) 9
(22) Record
(23) IR remote receiver
The front panel of F series
(1) Play/Pause/5
(2)
Slow Play/6
(3)
Fast Play/7
(4) Playback pause/8
(5) Playback stop/9
(6)
Record
(7)
Power switch
(8) USB
(9) Main Menu/0
(A)
Screen switch/1
(B)
Record search/2
(C) PTZ control/3
(D) Assist/4
(E)
Shift
(F)
Cancel
(G) IR remote receiver
(H) Direction&Enter
(I)
Light indicator
The front panel of K series
(1) Direction&Enter
(2) Play pause/1
(3) Previous File/2
(4) N e x t F i l e 3
(5) Playback pause/4
(6) Light indicator
(7) Playback stop/5
(8)IR remote receiver
(9) Record search/6
(A) Alarm Output/7
(D)Zoom i n /9
(E) Preset point
(H)Screen Switch
(I) Record
(L) shift
(M) Power Switch
(B) Assist
setup/0 (F) USB

(J) PTZ
(C)Zoom o u t /8
(G) Cancel
(K) Main Menu
The front panel of D series
(1)IR remote receiver (2)Power indicator light

(3)Alarm indicator light
(5)Record indicator light(6)Network indicator light (7)Status indicator light
(9)Return main menu (10)PTZ
(11)Playback
(13)Next file
(14)Record
(15)Slow Play
(17)Fast Play
(18)Play back Stop
(19)Direction$Enter
(21)Stop Play
(22)ESC
(23)Power Switch
(4)Keyboard indicator light

(8)function indicator light
(12)Previous File
(16)Playback pause
(20)USB
2.5 Rear panel

The rear panel of T series
Video Input
Audio Input
Video
Output
VGA
USB
Power Input
10
Audio Output
Network
The rear panel of A series
5004A-B
1
Video Input
VGA
Video
Output
Audio Input
Audio Output
Network
USB
RS485
Power
5008A-B
*this model of device's interface is the same as 5004A-B's,just four more video input
11
The rear panel of C series
5004C-B
1
Video Input
Audio Input
USB
Video
Output
Audio
Output
RS485
VGA
Network
Power
12V Output
5004C-S
1
Video Input
Audio Input
Video
Output
*other interface of this model are similar as 5004C-B
5008C-S
12
5008C-C
5016C-S
5016C-C
The rear panel of E series
13
5004E-S
1
Video Output
Audio Input
Network
VGA
Power Supply
Switch
10
Audio Output
11
12V Input
*other model 's interface are same as 5004E-S
5008E-S
5016E-S
5032E-S
The rear panel of F series
14
USB
External
Interface
Video Output
Video Input
Audio Input
USB
Network
VGA
Power Supply
Switch
External
Interface
Video Output
10
Audio Output
Power
Supply
VGA
Fan
Network
External
Interface
Video
Output
External
Interface
HDMI
The rear panel of K series
Power Switch
Video Input
USB
10
Audio Output
11
The rear panel of D series
15
12
Video Input
Audio Input
HDMI
USB
Network
VGA
Power Supply
10
Power Switch
11
External
Interface
Video
Output
12
Audio Output
Video Input
HDMI
USB
Video
Output
Network
VGA
Power
Supply
Audio
Output
Power Switch
7
10
External
Interface
Audio Input
8
11
*this series products have same rear panel
16
SDI
5008D-EH
2.6 Audio and video input and output connections

2.6.1 Video input connections
The video input port is BNC connector plug. The demand of input signal is PAL/NTSC
BNC(1.0VP-P,75).
The video signal must be accorded with the state standard which has the high signal to noise ratio,
low aberration and low interference. The image must be clear and has natural color in the appropriate
brightness.
Insure the vidicon signal stable and credible
The vidicon should be installed in the appropriate location where is away from backlighting and low
illumination or adopts the better backlighting and low illumination compensation.
The ground and power supply of the vidicon and the DVR should be shared and stable.
Insure the transmission line stable and credible
The video transmission line should adopt high quality coaxial pair which is chosen by the
transmission distance. If the transmission distance is too far, it should adopt shielded twisted pair, video
compensation equipment and transmit by fiber to insure the signal quality.
The video signal line should be away from the electro magnetic Interference and other equipments signal
lines. The high voltage current should be avoided especially.
Insure the connection stable and credible
The signal and shield lines should be firm and connected credible which avoid false and joint
welding and oxidation.
2.6.2 Video output connections and options
The video output is divided into PAL/NTSC BNC(1.0VP-P,75) and VGA output(selective
17
configuration).
When replace the monitor by the computer display, there are some issues to notice
1Do not stay in the turn-on state for a long time.
2Keep the computer display normal working by demagnetizing regularly.
3Stay away from the electro magnetic Interference.
TV is not a credible replacement as a video output. It demands reducing the use time and control the
power supply and the interference introduced by the nearby equipments strictly. The creepage of low
quality TV can lead to the damage of other equipments.
2.6.3 SDI video input
Only part models of 6000 series support SDI encode for 1080P
2.6.4 Audio signal input
Audio port is BNC connection.

The input impedance is high so the tone arm must be active.
The audio signal line should be firm and away from the electro magnetic Interference and connected
credible which avoid false and joint welding and oxidation. The high voltage current should be avoided
especially.
2.6.5 Audio signal output
Commonly the output parameter of DVR audio signal is greater than 200mv 1K(BNC) which can
connect the low impedance earphone and active sound box or other audio output equipments through
power amplifier.
If the sound box and the tone arm can not be isolated, howling phenomena is often
existed. There are some methods to deal with the above phenomena.
1 Adopt better directional tone arm.
2 Adjust the sound box volume to be under the threshold that produces the howling phenomena.
3 Use fitment materials that absorb the sound to reduce reflection of the sound.
4 Adjust the layout of the sound box and the tone arm.
2.7 Alarm input and output connections

Before connecting the device,please pay attention to follow situations:
18
*note:T series have no alarm input/output functions.

..Alarm input
A.
Alarm input is grounding alarm input.
B.
Alarm input demand is the grounding voltage signal.
C.
When the alarm is connected with two DVRs or connected with DVR and other equipments, it
should be isolated by relay.
Alarm output
2.
2.Alarm
Alarm output can not be connected with high-power load(no more than 1A).When forming the output
loop it must prevent the big current from relay damage. Use the contact isolator when there is a
high-power load
PTZ decoder connections
3.
3.PTZ
A.
The grounding of the PTZ decoder and DVR must be shared otherwise the common-mode
voltage will lead to the PTZ control failure. The shielded twisted pair is recommended.
B.
Avoid the entrance of high voltage. Make the layout reasonably. Take precaution from the
thunder.
C.
In the outlying end connect 120 resistance paralleled to reduce the inflection and insure the
signal quality.
D.
The 485 AB lines of DVR can not connected with other 485 output equipments paralleled.
E.
The voltage between the AB lines of the decoder must be less than 5V.
Front equipment grounding note

4.
4.Front
Bad grounding can lead to the burnout of the chip.
5.Alarm input type unlimited
The DVR alarm output port is constant opening type.
eight external alarm interface
19
(1) alarm input 1,2,3,4

(6) ground
(2) ground
(3) RS232
(4) RS485
(5) alarm input 5,6,7,8
(7) alarm output
sixteen external alarm interface
alarm input
ground
alarm output
Parameter
RS485
RS232
meaning
grounding
R,T
RS232 port
A,B
485communciate interface which is connected with the

recording control equipments such as the decoder
2.7.1 Alarm input port specification
8 channels alarm input. Alarm input type unlimited.

The grounding and the com port of the alarm sensor are parallel (The alarm sensor is external power
20
supply) .
The grounding of the alarm and the DVR should be shared.
The NC port of the alarm sensor must be connected with the DVR alarm input port.
The grounding of the power supply and the alarm sensor must be shared when used in external power
supply.
2.7.2 Alarm output port specification
2 channels alarm output. There is external power supply when using the external alarm equipment.
Please refer to the relay relevant parameters to avoid the overload that damages main machine.
2.7.3 Alarm output port relay parameters
TypeJRC-27F
Interface material
silver
rating
Rating switch capacity
30VDC 2A, 125VAC 1A
(resistance load)
maximal switch power
125VA 160W
maximal switch voltage
250VAC, 220VDC
maximal switch current
1A
Homo-polarity interface
1000VAC 1minute
Inhomo-polarity
1000VAC 1 minute
Interface and winding
1000VAC 1 minute
Homo-polarity interface
1500VAC (10160us)
isolation
Surge voltage
Turn-on time
3ms max
Turn-off time
3ms max
longevity
mechanical
50106 MIN3Hz)
electric
200103 MIN (0.5Hz)

-40~+70
Environment
2.8 Speed dome connections

1.Connect the 485 lines of the speed dome with the DVR 485 interface.
21
the 485 interface of eight external alarm
the 485 interface of sixteen external alarm

2.Connect the video line with the DVR video input.
3.Electrify the speed dome
3 Basic operation
Note: The button in gray display indicates nonsupport.
3.1 Turn on
Plug the power supply and turn on the power supply switch. Power supply indicator light shining
indicates turning on the video recorder. After the startup you will hear a beep. The default setting of video
output is multiple-window output mode. If the startup time is within the video setting time, the timing video
recording function will start up automatically. Then the video indicator light of corresponding channel is
shining and the DVR is working normally.
Note:
Note:1. Make sure that the input voltage corresponds with the switch of the DVR power supply.
2. Power supply demands: 220V10% /50Hz.
22
Suggest using the UPS to protect the power supply under allowable conditions.
3.1 Turn off

There are two methods to turn off the DVR. Entering [main menu] and choosing [turn off] in the [turn
off the system] option is called soft switch. Pressing the power supply switch is called hard switch.
Illumination:
1Auto resume after power failure
If the DVR is shut down abnormally, it can automatically backup video and resume previous
working status after power failure.
2Replace the hard disk
Before replacing the hard disk, the power supply switch in the real panel must be turned off.
3Replace the battery
Before replacing the battery, the setting information must be saved and the power supply switch
in the real panel must be turned off. The DVR uses button battery. The system time must be checked
regularly. If the time is not correct you must replace the battery, we recommend replacing the battery
every year and using the same battery type.
Note: The setting information must be saved before replacing the battery otherwise
information will lose.
3.3 System Login

When the DVR boots up, the user must login and the system provides the corresponding functions
with the user purview.There are three user settings. The names are admin
admin, guest and default and
these names have no password. Admin is the super user purview; guest and default
defaults permissions are
preview and video playback. User admin and guest
guests password can be revised, while their permissions
cant be revised; user default is the default login user whose permission can be revised but not its
password.
23
Picture 3.1 System Login

Password protection: If the password is continuous wrong three times, the alarm will start. If
the password is continuous wrong five times, the account will be locked. (Through reboot or after
half an hour, the account will be unlocked automatically).
For your system security, please modify your password after first login.
3.4 Preview
You can right click mouse to choose the switch between the windows.
The system date, time and channel name are shown in each viewing window. The surveillance video
and the alarm status are shown in each window.
1
Recording status
Video loss
Motion detect
Camera lock
Table 3.1 Preview icon
3.5 Desktop shortcut menu

In preview mode you can right click mouse to get a desktop shortcut menu,as the picture 3.2
shows.The menu includes: main menu, record mode, playback, PTZ control, High Speed PTZ,
Alarm Output, color Setting, Output adjust, Logout, view mode shift ,spot
,spot..
ial model of 6000 series support Spot
*Only part
partial
24
Shortcut menu in full analog(DVR)/Hybrid(HVR) mode
Shortcut menu in full digital(NVR) mode

Picture 3.2 Shortcut Menu
*compare to analog/hybrid mode's shortcut menu,the full digital mode do not have color setting
function.
3.5.1 Main menu
When you login, the system main menu is shown as below.
25
Picture3.3 Main Menu

3.5.2 Playback
There are two methods for you to play the video files in the hard disk.
1 In the desktop shortcut menu.

2 Main menu>Record->Playback
Note: The hard disk that saves the video files must be set as read-write or read-only state.(4.5.1)
state.(4.5.1)..
Picture 3.4 video playback

1. Playback control
2. Operation hint
4. listed files
5. file information
3. file searching
Listed filesLook up the listed files that accord with the searching criteria.
File informationLook up the found file information.
26
Playback controlSee detail in below chart
Key
Function
Key
Function
Play/Pause
Backward play
Slow forward
Fast forward
Previous frame
Next frame
Previous file
Next file
Round play
Full screen
Stop
Picture 3.5 Playback control key
Note: play under frame by frame, the playback status should be paused firstly.
Operation tipsshow function of the key that cursor placed.
Special functions
functions
Accurate playback
playbackInput time (h/m/s) in the time column and then click play
button. The
system can operate accurate playback according to the searching time.

Local zoom
zoomWhen the system is in single-window full-screen playback mode, you can drag your
mouse in the screen to select a section and then left click mouse to realize local zoom. You can right click
mouse to exit.
Note: When current resolution of the channel is over Max resolution, to playback this channel,
will show a Red X.
3.5.3 Record Control
Please check current channel status: means it is not in recording status, means it is in
recording status.
You can use desktop shortcut menu or click [main menu]> [recording function]> [recording set]
to enter the recording control interface.
27
Picture 3.8 Record Mode

ScheduleRecord according to the configuration.
ManualClick the all button and the according channel is recording no matter the channel in any
state.
StopClick the stop button and the according channel stops recording no matter the channel in
any state.
3.5.4 Alarm output
Please check current channel status: means it is not in alarming status, means it is in
alarming status.
You can use desktop shortcut menu or click [main menu]> [alarm function]> [alarm output] to
enter the alarm output interface.
*T series no alarm output
Picture 3.9 alarm output

ConfigurationAlarm is on according to the configuration.
ManualClick the all button and the according channel is alarming no matter the channel in any
state.
StopClick the stop button and the according channel stops alarming no matter the channel in any
state.
28
3.5.5 PTZ control

*T series no PTZ function
*PTZ control is a little different between hybrid mode & full digital mode:
Digital channel the digital channel need link PTZ, the remote device should connect with PTZ
and with protocol correctly set also.
Analog channel Only when the device is connect with PTZ and configure protocol correctly is
ok.
Operation interface is as followed. The functions include: PTZ direction control, step, zoom, focus,
iris, setup operation, patrol between spots, trail patrol, boundary scan, assistant switch, light switch,
level rotation and so on.
Note
Note1. Decoder A(B)line connects with DVR A(B)line. The connection is right.
2. Click [main menu] >[system configuration] >[PTZ setup] to set the PTZ parameters.
3. The PTZ functions are decided by the PTZ protocols.
Picture 3.10 PTZ setup

SpeedSet the PTZ rotation range. Default range: 1 ~ 8.
ZoomClick
button to adjust the zoom multiple of the camera.
FocusClick
button to adjust the focus of the camera .
IrisClick
button to adjust the iris of the camera.
HideCurrent interface will be temporarily hidden after click it.

Direction controlControl the PTZ rotation. 8 directions control is supportive.(4 directions in Front
panel is supportive )
High speed PTZFull-screen show channel image. Left press mouse and control PTZ to rotate
orientation. Left press mouse and then rotate the mouse to adjust the zoom multiple of the camera.
29
SetEnter the function operation menu.

Page switchSwitch between different pages.
Special functions
functions
Preset
1Preset
Set a location for the preset, calls the preset points, PTZ automatically turns to the setting
position
1Preset option
Set a location for the preset, procedure is as follows:
Step1: in Picture 3.10, click the Direction button will turn into preset position , click the Settings
button to enter Picture 3.11.
Step 2: click the Preset button , then write the preset points in the input blank,
Step 3: click Settings button, return the Picture 3.10 Complete setup,
that is the preset points and
preset position corresponds.

Clear Preset
PresetInput preset points, click Remove button, remove the preset.
Preset point input blank

Preset button
Picture 3.11 Preset Settings

2Preset Point Calls
In Picture 3.10, click Page Shift button, enter PTZ control interface as shown in Picture 3.12. In
the input blank, write the preset points, then click Preset button, PTZ turn to the corresponding
preset point.
30
Value input blank
Picture 3.12 PTZ Control

Cruise between Points
2Cruise
Multiple preset points connected cruise lines, call cruise between points, the PTZ run around on
the line
1Cruise Between Points Settings
Cruise lines is connected by multiple preset points, setting procedure is as follows:
Step1: In Picture 3.10, the Direction key will turn PTZ to designated location , click Settings
button to enter Picture 3.13,
Step 2: click Cruise buttons, the write proper value into the Cruise Line and Preset Points
blank then click Add Preset Points button, complete setting (also can add and delete cruise line
which has been set up)
Step 3: repeat step1 and step2 , until set out all the preset designated cruise lines
Remove Preset Please input preset value in the blank, click Remove Preset button, then
remove the preset points.
Remove Cruise Line
LineInput the number of cruise line, click Remove Cruise Lines button, then
remove the cruise lines set
31
Preset Points Blank
Time interval
Cruise Button
Cruise Line Blank
Picture 3.13 Cruise Between Points Settings

2The Calls of Cruise between Points
In Picture 3.10, click Page Shift button, enter PTZ control menu as shown in Picture 3.12. Please
input the number of cruise in the value blank, then click Cruise between Points button, PTZ begins to
work on the cruise line. Click Stop button to stop cruise.
Scan
3Scan
PTZ also can work on the preset scan line repeatedly.
1Scan setup
Setting steps:
Step1: In Picture 3.10, click Setup button enter Picture 3.14
Step2: Click Scan buttonthe input proper value in the scan value blank;
Step3: Click Start button, enter Picture3.10 here you can set the following items:
Zoom,Focus,Aperture,Direction and so on. Click Setup button to go back Picture 3.14
Step4: Click End button to complete setupClick the right button of the mouse to exit.
Scan value blank
Scan Button
Picture 3.14 Scan Setup
32
2Scan Calls
In Picture 3.10, click Page Shift button, then enter PTZ control menu as shown in Picture 3.12.
Please input the number of scan in the value blank , then click Scan buttonPTZ begins to work on
the scan line . Click Stop button to stop.
Boundary Scan
4Boundary
In a horizontal lineset up a linecall scanPZT repeat operation according to the route
Boundary Scan setup
1Boundary
Set a period of horizontal curve for PTZ search path,the steps are as follows:
Step1In Picture 3.10, click Direction button to turn the PTZ to preset direction, then click Setup
button enter Picture 3.15, select the left boundary, return to Picture 3.10;
Step2Please click direction arrows to adjust PTZ direction, click Setup button enter Picture3.15,
then select the right boundary ,return to Picture 3.10;
Step3: Complete setup, that is the position of left and right boundary
Note
Note:when the left and right scan in one horizontal,the PTZ will cycle rotate from left scan along
the reverse direction to the right scan.
When the left and right scan not in the same horizontal ,the PTZ will regard the end of horizontal line
which connect to left scan as right scan,cycle rotate from left scan along the reverse direction to the right
scan.
Left/Right scan setting button
Line scan button border
Picture 3.15 Boundary Scan Setup

2Boundary Scan Calls
In Picture 3.10, click Page Shift button, then enter PTZ control menu as shown in Picture 3.12.
Please input the number of scan in the value blank , then click Scan buttonPTZ begins to work on
the scan line . Click Stop button to stop.
33
Horizontal Rotating
5Horizontal
Click Horizontally Rotating button, PTZ begins to rotate horizontally (relative to the original position
of the camera). Click the Stop button to stop.
Rotate
6Rotate
Click on horizontal Rotating button, PTZ turn around.
Reset
7Reset
PTZ restart, all the data clears to 0.
Page Shift
8Page
In Picture 3.12, click Page Shift button into Picture3.16, setting auxiliary function. Auxiliary
number corresponding to auxiliary switch on the decoder.
Picture 3.16 Auxiliary Function Control

Intuitive Auxiliary Operation choose auxiliary equipment, select Open or Close button,
switch control
Auxiliary Number The operation of corresponding auxiliary switch according to PTZ
agreement
Page ShiftIn Picture 3.16click Page Shift button enter the Picture 3.17 PTZ Main Menu , the
menu itself can be control by the menu control buttons
3.5.6 Color setting

*color setting only apply for Hybrid
(HVR)
/full analog
(DVR) mode,and only analog channel can
Hybrid(HVR)
(HVR)/full
analog(DVR)
setting.
Set the selective image parameters (current channel for single window display and cursor place for
multi-window display). You can use the desktop shortcut menu and enter the interface. The image
34
parameters include: tonality, brightness, contrast, saturation. You can set different parameters at different
time sections.
Picture 3.18 Color Setting
3.5.7 Output Adjust

*Hybrid mode is with black margin vertical & horizontal, while full digital mode without.
Adjust TV output area parameters. You can use the desktop shortcut menu or enter [main menu]>
[management tools]> [Output adjust].
Hybrid(HVR) Mode
full digital(NVR) mode
Picture 3.19 Output Adjust

Note: The black margin vertical & horizontal at output adjust of hybrid mode is only effect to
analog channel.
3.5.8 Logout
Logout, shut down the system or reboot up. You can use the desktop shortcut menu or enter [main
35
menu].
Picture 3.20 Logout/Shutdown/Reboot the system

logoutQuit the menu. Offer password next entrance.
shut downQuit the system. Turn off the power supply.
When press the shut down button, there is schedule hint. After three seconds, the
system is shut down. Cancel midway is of no effect.
rebootQuit the system. Reboot up the system.
T series have no shutdown function.
*Note
NoteT
T series logout
3.5.9 Window switch
Preview in single window/four windows/eight windows/nine windows/sixteen windows according to
your choice.
different video input number have different switchable preview picture.
Note
Notedifferent
3.6.0 Spot
Only part products of 6000 series support this function.the first BNC interface regard as Spot
interface,the user can switch to Spot output image segmentation mode through shortcut menu.After
connect to this BNC interface,no matter what operation in VGA,the TV only output the device's preview
screen, no GUI interface.
36
Preview in single window/four windows/sixteen windows according to your choice.

Different video input number have different preview screen.
Note
NoteDifferent
37
4 Main menu
4.1 Main menu navigation
Main menu
Sub menu
Function
Config
Set the recording configuration, recording type, recording time section
playback
Record
Set recording search, recording play, video file storage

Set screen capture period, type ,etc.
Storage
Note
T series and 6000 series have no this function
NoteT
backup
Detect backup device, format device, back the selective files

Set motion detect alarm channel, sensitivity, area, linkage parameters:
Motion
defending time section, alarm output, screen hint, recording, screen
detection
shot, PTZ, patrol, buzz, email and FTP upload
Set camera mask alarm channel, sensitivity, linkage parameters:
Video
blind
shot , PTZ, patrol, buzz, email and FTP upload
Set video loss alarm channel, linkage parameters: defending time
Video
section, alarm output, screen hint, recording, screen shot , PTZ, patrol,
loss
buzz, email and FTP upload
Alarm
Set alarm input channel, equipment type, linkage parameters:

Alarm
input
shot , PTZ, patrol, buzz, email and FTP upload

T series have no this function
Note
NoteT
Set alarm mode: configuration, manual, shut down
Alarm output
Note
NoteT
Exception
handling
No HDD, HDD error, HDD capacity not enough, network cut, IP

Conflict, linkage parameters, screen hint or buzz.
38
Set algorithm rule: trajectory displaysensitivityminimum pixelalert

Intelligent
analysis
modeand setting linkage parameters:periodalarm outputthe screen

promptrecordPTZtourbuzzerEMAILFTP upload.
Note
Note:: 6000 series support this function
General
configuration
Set system time, data format, language, hard disk full time operation,
machine number, video format, output mode, summertime, stay time
Set main (extra) coding parameter: code mode, resolving ability, frame
rate, code stream control, image quality type, code stream value, frame
Encode
between value, video/audio enable,
configuration
Note only Hybrid mode and full analog mode have encode
configuration.
Network
configuration
NetService
Set basic network parameters, DHCP and DNS parameters, network

high speed download
PPPOENTPEmailIP purviewDDNS parameter
Set channel title, preview hint icon state, transparency, cover area,
time title, channel title fold.
System
GUI display
Note only analog channel can set channel name,region
configuration
cover ,time title,channel title fold.
Set channel, PTZ protocol, address, baud rate, date bit, stop bit, check
PTZ
Note
NoteHybrid mode shows PTZ configuration
configuration,,T series have no this
configuration
function.
RS485
Set serial port function, baud rate, date bit, stop bit, check
Device
Full digital mode shows : RS485 Device

Note
NoteFull
Serial port
Set serial port function, baud rate, date bit, stop bit, check
Configuration
Note
NoteT
(RS232)
Tour
Set patrol mode and interval time

Set Spot tour mode and time interval
Spot
only part
ial products of 6000 series support.
Note
Noteonly
partial
39
Set channel mode, check channel status and configure the digital
Digital
channel, etc.
only HVR and 6000 series support
Note
Noteonly
Hard disk
management
Set appointed hard disk as read-write disc, read-only disc or redundant

disc, clear data, resume date and so on
User
Modify user, team or password. Add user or team. Delete user or team.
management
Break the connection with the already login user. Lock the account
Online user
after break until booting up again.
Adjust upside, downside, nearside, starboard distance, black margin
Output adjust
vertical & horizontal

only analog channel have black margin vertical & horizontal
Note
Noteonly
Management
tools
Automatic
Set automatic reboot system and automatic deleting files.
maintenance
Resume setup state: common setup, code setup, recording setup,
Restore
alarm setup, network setup, network service, preview playback, serial

port setup, user management
Upgrade
Device Info
upgrade with external device(like USB)

device hardware configuration and message
Export the device's log or configuration to external device(like USB
Import/Export
flash disk);Input the configuration with external device(like USB flash

disk).
Hard disk
Display hard disk capability and recording time
information
BPS
Display code stream information
System
information
Log
Clear all log information according to the log video and time
information
Edition
Display edition information
information
40
Logout, shut down or reboot
T series have no shut down

Note
NoteT
Shut down
function
4.2 Record
Operations related to record, including: Record, Playback, Backup, Screen shot
shot((only Hybrid
mode and full analog have
have))
uration
4.2.1 Record Config
Configuration
Set the recording parameters in the surveillance channel. The system is set 24 hours consecutive
recording in the first startup. You can enter [main menu]> [recording function]> [recording setup] to set.
Note
Note::There is at least one read-write hard disk.refer to chapter 4.5.1
Picture 4.1 Record Configuration

ChannelChoose the corresponding channel number to set the channel. Choose the all option to
set the entire channels.
RedundancyChoose the redundancy function option to implement the file double backup function.
Double backup is writing the video files in two hard disks. When you do the double backup, make
sure that there are two hard disks installed. One is read-write disk and the other is redundant disk.
(refer to 4.5.1)
LengthSet the time length of each video file. 60minutes is default value.
Pre-RecordRecord 1-30 seconds before the action. (time length is decided by the code stream)
Record modeSet video state: schedule, manual or stop.
Schedule:
Schedule:Record according to the set video type (common, detection and alarm)and time
section.
41
Manual:
Manual:Click the button and the according channel is recording no matter the channel in
any state.
Stop:
Stop:Click the stop button and the according channel stops recording no matter the
channel in any state.
PeriodSet the time section of common recording, The recording will start only in the set range.
Record typeSet recording type: regular, detection or alarm.
Regular:
Regular:Perform the regular recording in the set time section. The video file type is R.
Detect:
Detect:Trigger the motion detect, camera mask or video loss signal. When above
alarm is set as opening recording, the detection recording state is on. The video file
type is M.
Alarm:
Alarm:Trigger the external alarm signal in the set time section. When above alarm is set as
opening recording, the detection recording state is on. The video file type is A.
Note
Note:: Refer to chapter 4.3 to set corresponding alarm function.
2 Playback
4.2.
4.2.2
Refer to chapter 3.5.2.
3 Backup
4.2.
4.2.3
You can backup the video files to external storage through setup.
The storage must be installed before the file backup. If the backup is terminated, the
Note
NoteThe
already backup can playback individually.
42
Picture 4.2 Backup
DetectDetect the storage connected with the DVR such as hard disk or universal disk.
BackupClick backup button and the dialog box is popped up. You can choose the backup file
according to the type, channel and time.
Picture 4.3 Backup

Remove
RemoveClear the file information.
Add
AddShow the file information satisfying the set file attributes.
43
Backup format
formatconfigurate the backup file format,according to require,can choose
Start/pause
Start/pauseClick the play button to start the backup and click the pause button to stop the
backup.
Note
NoteDuring backup you can exit the page layout to carry out other functions.
Burningthe file will be burned synchronously after click it.
EraseChoose the file to delete and click erasure to delete the file.
StopStop the backup.
4.2.4 Snapshot Storage

part products have this function.
*Note
Notepart
Setup snapshot parameters for different channels.At first time it's set for 24hours snapshot
continuously,please go to Main Menu--Record--Snapshot Storage for appropriate setting.
Note:If normal snapshot storage,please setup snap at Main Mend--advanced--snapshot(please
refer to chapter 4.5.1 HDD Manager)
Picture 4.2 snapshot storage

ChannelSelect the related channel to set,click"all"to set all channels.
PresnapSetup presnap picture quantity before recording,default is 5 pieces
RecordSet record status."Schedule","Manual"and"Stop".
44
Schedule
ScheduleRealise snapshot according to record type(regular,detect and alarm)and period
Manual
ManualNo matter what the present channel is in a state,once choose"manual"button,it will
have snapshot at related channels.
Stop
StopNo matter what the present channel is in a state,once choose "stop"button,it will stop
snapshot at related channels.
PeriodSet normal record period,it only startup Snapshot Storage at set period.
TypeThree types:regular,detect and alarm.
Regular
Regularsnapshot at set period.
Detect
Detectsnapshot at set period when motion detect,video blind and video loss which are
preset for snapshot enable.
Alarm
Alarmsnapshot at set period when alarm in which is preset for snapshot enable.
Note:for related alarm function,please refer to chapter 4.3.
4.3 Alarm Function

Alarm functions include: motion detect,video blind, video loss, alarm input and alarm output,
intelligent analysis.
abnormality
abnormalityintelligent
4.3.1 Motion Detect
When system detects the motion signal that reaches the set sensitivity, the motion detect alarm is on
and the linkage function is turned on.
Note
Note: "Advanced" button is the same as right click.
*Motion detect function is different between Hybrid mode & Full digital mode:
Digital channel: not only to enable motion detect function at local side, but also to enable the
remote device that was connected. when remote device detect motion movement, local side will
start alarm recording, otherwise this function is not enable.
Hybrid mode: only need to enable motion detect function at local side.
45
Video detect in Hybrid mode
Video detect in full digital(NVR) mode

Pic 4.4
ChannelChoose the set motion detect channel.
Enable means that the motion detect function is on.
46
SensitivityChoose in the six options according to the sensitivity.
Note: Only the motion detect under hybrid mode

mode// full analog mode have this function of
setting sensitivity
sensitivity,, and also only the analog channel can set region.
RegionClick [set] to enter the set area. The area is divided into PAL22X18. Red block means the
motion detect defensive area. White block means the unfenced area. You can set the area as
followed, Drag the mouse and draw the area. Default: all selected blocks are detection area.
/full analog mode have this function of
Note: Only the motion detect under hybrid mode
mode/full
setting region, and also only the analog channel can set region.
Picture 4.5 Region
PeriodTrigger the motion detect signal in the set time section. You can set according to week or
set uniformly. Each day is divided into four time sections. means the set valid.
Picture 4.6 set the time section

47
IntervalOnly one alarm signal is turned on even there are several motion detect signals in the set
interval.
Alarm outputStart the external equipment of corresponding linkage alarm when the motion detect
alarm is turned on.
DelayDelay a few moments and stop when the alarm state is turned off. The range is 10~300
seconds.
Record channel Choose the recording channel (multiple option supportive). Trigger the video
signal when the alarm is turned on.
Note:
Note:Set in the [recording setup] and perform the linkage recording. Start detecting video files
in the corresponding time section.
Tour means that the selective channel is single window alternate patrol preview. The interval is
set in the [Main Menu]>[System] > [Tour].
PTZ ActivationSet the PTZ activation when the alarm is turned on.
*Hybrid mode, PTZ link to the related PTZ information of analog channel, While digital
channel model, the PTZ is link to the related PTZ information on the remote device connected.
Note
Noteto link PTZ, need go [Shortcut menu]->[PTZ control] to set preset point, cruise between
points & interval time, etc.
Picture 4.7 PTZ Activation under hybrid mode

DelayWhen alarm is over,recording will last some seconds(10~300sec),then stop.
Show messagePop the alarm information dialog box in the local host computer screen.
Send EMAIL means sending an email to user when the alarm is turned on.
Note:
Note:Set in the [NetService] and send email.
FTP uploadto tick it, the video & picture of related record channel & snapshot channel will be
uploaded to assigned position.
48
Note
NoteFTP upload need be set at [Netservice]
BuzzWhen alarm happens, device will come out with buzz.
4.3.2 Video Blind
When the video image is influenced by the environment such as bad brightness or reaching the set
sensitivity parameter, the camera mask function is turned on and the linkage function is turned on.
*Same as motion detect function, video blind is different between Hybrid mode & Full digital
mode:
Digital channel: not only to enable video blind function at local side, but also to enable the remote
device that was connected. when remote device with video blind, local side will start alarm
recording, otherwise this function is not enable.
Hybrid mode: only need to enable video loss function at local side.
Note
Video Blind in Hybrid mode
49
Video blind in full digital(NVR) mode

Pic 4.8 Video blind
Set method: refer to chapter 4.3.1. Motion detect
4.3.3 Video Loss
When the equipment can not obtain the channel video signal, the video loss alarm is turned on and
the linkage function is turned on.
*Same as motion detect function, video loss is different between Hybrid mode & Full digital
mode:
Digital channel: not only to enable video loss function at local side, but also to enable the remote
device that was connected. when remote device with video loss, local side will start alarm
recording, otherwise this function is not enable.
Hybrid mode: only need to enable video loss function at local side.
Note
50
Video loss in Hybrid(HVR) mode
Video loss in full digital(NVR) mode

Pic 4.9 Video loss
4.3.4 Alarm input
When the equipment obtains the external alarm signal, the alarm function is turned on.
51
*Alarm input is the same between hybrid mode & full digital mode, function enable, when it
was set normal, only need to connect alarm sensor at alarm input port on local side, the alarm
information is occurring, and will link to related setting functions at the same time
Note
Alarm input in Hybrid(HVR) mode
Alarm input in NVR mode

Pic 4.10 Alarm input
52
4.3.5 Alarm output
4.3.6 Abnormal
Analysing and inspecting current software and hardware of the device: When some abnormal events
happen,the device will make a relative answer such as show message and buzzer.
Picture 4.11 Abnormal
Event Type
Enable
Show message
Buzzer
selecting abnormity you want to inspect

Select it to make sure abnormal function workable
Automatically alarm cue dialog box come out of the main screen
Device will have one long nosie di while alarm is happening
4.3.7 Intelligent analysis

*Note
Note:: only part of product support this function at present
present
To analyze the video image, when system detect object that meet pre-set algorithm rules and fit set
flexibility and minimum image distance, will trigger video analysis alarm, and enable the linkage
function.
*only the 1st channel of full analog mode and hybrid mode can support this function, and if
53
this function is enabled, then video blind is invalid.
Pic 4.12 Intelligent analysis setting page
Channel No.only shows by 1at present, only the 1st channel with maximum resolution of 1080P in
the full analog(DVR) mode and hybrid(HVR) mode
Enabletick it to enable the video analysis function, then can go for further setting,
Algorithm ruleat drop-down box
to choose the algorithm rule of detection,
Rulechoose different algorithm rules, the related setting page is different.

Cordon
Cordon::
Show traces tick it to enable, when alarm triggers, there will be red box around moving objects.
Sensitivity , base on different requirement, there are 3 options in the drop-down box
Minimum image distance range between 0~30 %the more flexible the less image distance.
Alert way there are 2 kindscordon and warning area. Cordon

CordonCan set 3 prohibited directions:
bidirectional prohibited, from top to bottom (from left to right), from bottom to top (from right to left),
when the setting cordon is too slope, show with from left to right / from right to left, otherwise will be
from top to bottom / from bottom to top, when the moving object meet preset cordon rules, the alarm
will be triggered; Warning area: can set 3 kinds of prohibited directions: bidirectional prohibited,
54
enter and leave, when the moving object meet preset warning area rules, alarm will be triggered.
Rules
click setting
settingenter rule setting page, right click mouse, choose add, use mouse to fix two or
more point, and then connect them to form a line or a irregular region, after that a box of prohibited
direction options will come out, choose one of them, right click mouse, click Yes, return to previous
page, click Yes, alarm rules setting is finished.
Pic 4.13 rules setting - cordon
Items care
care::
Show traces tick it to enable, when this function is triggered, there will be read box shows around
the moving object
Minimum image distance range between 0~30 %the more flexible the less image distance.
Alert way: three modes: Items strandedItems stolenIllegal parking.Items stranded:object appears
within warning area, and the size of object meet the rules of minimum image distance, alarm will be
triggered. Items stolen:object disappears within warning area, and the size of object meet the rules
of minimum image distance, alarm will be triggeredIllegal parking:this way is similar with
Items
stranded.
Rules click setting,

setting,enter the setting page of rule, right click mouse, choose add, use mouse to fix
several points and then connect them to form a irregular region, right click mouse, click Yes, return to
55
previous page, click Yes, alarm rule setting if finished.
Pic 4.14 rule setting - items care

Video diagnosis
diagnosis::
Detection type: there are 8 kinds of detection type: Brightness anomaly detection Sharpness
detectionNoise detectionColor cast detectionScreen freezes detectionScene change detection

Anthropogenic interference and PTZ runway detection.Can choose one or more types if necessary,
when video detect selected type, the alarm will be triggered.
Pic 4.15
rule setting page of video diagnosis
The setting way of set / withdraw garrison time period and linkage parameter, please refer to
chapter4.3.1 motion detection
56
For example
example enable video analysis function, algorithm rules is PEA
PEA, the alert way in the rule is
Cordon
Cordon, prohibited direction is bidirectional, when a moving object across this warning line, alarm is
triggered, see below pic4.16
Pic 4.16
the alarm image regarding one of the video analysis
Video Teaching
http://v.youku.com/v_show/id_XNDY5Mjc0OTcy.html
http://v.youku.com/v_show/id_XNDY5Mjc3MjAw.html
http://v.youku.com/v_show/id_XNDY5Mjc4ODg4.html
http://v.youku.com/v_show/id_XNDY5Mjc4MDA0.html
,cordon
,warning area
,items stranded
,items stolen shift
4.4 System setup

Set the system parameters such as General, Encode
Encodeunder Hybrid/full analog mode
modeNetwork,
GUI display
PTZ configure/RS485 device
RS232
Tour setup
Spot and digital
Net service
serviceGUI
displayPTZ
deviceRS232
RS232Tour
setupSpot
digital
57
4.4.1 General
Picture 4.17 General setup

System timeSet the system data and time.
Date formatChoose the data format: YMD, MDY, DMY.
Date SeparatorChoose list separator of the data format.
Time FormatChoose time format: 24-hour or 12-hour.
Languagesupport 29 language at
present:Arabic,Czech,English,Finnish,Greek,Indonesian,Italian,,Japanese,Portuguese,Russian,Thai,T-Chin
ese,S-Chinese,Turkish,Brazilian,Bulgarian,Farsi,French,German,Hebrew,Hungarian,Polish,Romanian,Spani
sh,Swedish,Vietnamese
HDD fullChoose stop record: Stop recording when the hard disk is full.
Choose overwrite: Cover the earliest recording files and continue recording when the
hard disk is full.
DVR No. Only when the address button in the remote controller and the corresponding DVR
number is matched, the remote operation is valid.
Video StandardPAL or NTSC.
Auto LogoutSet the latency time in 0-60. 0 means no latency time.
Machine NameCan setting the device's name.
DSTChoose the summer time option and pop the dialog box as followed.
58
Picture 4.18 DST (week)
Picture 4.19 DST (date)
4.4.2 Encode setup

*only 6000 series and HVR (other products only have analog channel) under Hybrid mode/full
encode settings is for analog channel only.
analog mode ,it has encode setup function,
function,encode
Set the video/audio code parameter: video file, remote monitoring and so on. Set every main stream
parameter in the left part, and set the extra stream parameter in the right part.
Note: extra stream introduces video compression technique which was applying for multi-channel
playback simultaneously, Dial-up multi-channel real-time monitor under poor bandwidth, or mobile
monitor and so on.
59
Picture 4.20 Encode setup

Independent channel code setting
ChannelChoose the channel number.
CompressionStandard H.264 main profile.
ResolutionResolution type:1080P/720P/960H/D1/ HD1/CIF / QCIF.
Frame RateP:1 frame/s~25 frame/s; N: 1 frame/s~30 frame/s
Bit Rate TypeYou can choose limited code stream or variable code stream. When you choose the
variable code stream there are six image quality options.under the limited code streamyou can choose
the code stream manually
Bit RateSet the code stream value to modify the image quality. The larger code stream value the
better image quality.
1080P(1024~8192kbsp) 720P(1024~4096kbps) 960H(869~4096kbps) D1 512~2560kbps HD1
384~2048kbps CIF64~1024kbps, QCIF(64~512kbps)
Frame Intervalcan choose the range 2~12s
Video/Audio When the icons are all in reverse displayed, the video file is video and audio
multiplex stream.
Extra stream Settings
Extra streamis used for client side monitoring & mobile monitoring.
Channel titleselect channel title and then
to choose whether need enable video & audio. The
resolution, frame rate, bit rate type settings is the same as main stream.
60
4.4.3 Network setup
Picture4.21
Network
Net CardYou can choose cable network card or wireless network card.
DHCP EnableObtain IP address automatically(not suggested)
Note
NoteDHCP server is preinstalled.
IP addressSet the IP address. Default: 192.168.1.10.
Subnet maskSet the subnet mask code. Default: 255.255.255.0.
GatewaySet the default gateway. Default: 192.168.1.1.
DNS setupDomain Name Server. It translates the domain name into IP address. The IP address
is offered by network provider. The address must be set and reboot then it works.
Media portDefault: 34567.
HTTP portDefault: 80.
HS Download
Transfer PolicyThere are three strategies: self-adaption, image quality precedence and fluency
precedence. The code stream will adjust according to the setup. Self-adaption is the tradeoff between
the image quality precedence and fluency precedence. Fluency precedence and self-adaption are
valid only when the assistant code stream is turned on. Otherwise image quality precedence is valid.
61
4.4.4 NetService
Choose the network service option and click the set button to configure the advanced network functions
or double click the service button to configure the parameters.
Picture 4.22
NetService
PPPoE setup
Picture4.23
PPPOE
EnableReverse means choose,setting can become effective.

Input the user name and password that ISP Internet service provider provides. After saving it
reboot up your system. Then the DVR will build a network connection based on PPPoE. The IP address
will change into dynamic IP address after above operation is well done.
OperationAfter PPPoE dialing successfully look up the IP address in the [IP address] and obtain
the current IP address. Then use this IP address to visit the DVR through user port.
62
NTP setup
Picture 4.24
NTP
The NTP server must be installed in the PC.

Enable
EnableReversemean choosesetting can become effective.
Host computer IP:
IP:Input the IP address installed NTP server.
Port:
Port:Default: 123. You can set the port according to NTP server.
Time zone:
zone:London GMT+0
+5
Bangkok GMT +7
GMT-10
Alaska GMT-9
Berlin GMT +1
Cairo GMT +2
Hongkong Beijing GMT +8

Pacific time GMT-8
Moscow GMT +3
Tokyo GMT +9
Sydney GMT +10
American mountain time GMT-7
GMT-6 American eastern time GMT-5 Atlantic time GMT-4
New Delhi GMT

Hawaii
American mid time
Brazil GMT-3 Atlantic mid time GMT-2.
Update Period:
Period:The same with the NTP server check interval. Default: 10minutes.
EMAIL setup
If the alarm is turned on or the alarm linkage photos are taken, send an email about the alarm
information and the photos to appointed address.
63
Picture 4.25 EMAIL

SMTP server:
server:Email server address. It could be an IP address or domain name. Domain name can
be translated only it is the correct DNS configuration.
Port:
Port:Email server port number.
SSL:
SSL:Decide whether using Secure Socket Layer protocol to login.
User Name:
Name:Apply the email server user name.
Password:
Password:Input the password corresponding to the user.
Sender:
Sender:Set the email sender address.
Receiver:
Receiver:Send the email to appointed receivers when the alarm is turned on. You can set three
receivers at most.
Title:
Title:You can set as you wish.
IP Filter setup
When choosing the white list, only the listed IP address can connect the DVR. The 64 IP addressed
are supportive in the list.
When choosing the black list, the listed IP address can not connect the DVR. The 64 IP addressed
are supportive in the list.
You can delete the set IP address by in the options.
Note
NoteWhen the same IP address is in the white and black list at the same time, the black list precedence
is higher.
64
Picture 4.26
IP FILTER
DDNS
Picture 4.27
DDNS setup
It is the abbreviation of dynamic domain name server.

Local domain name
nameProvide the domain name registered by DDNS.
User name
nameProvide the account registered by DDNS.
Password
PasswordProvide the password registered by DDNS.
When the DDNS is successfully configured and start, you can connect the domain name in the IE
address column to visit.
The DNS setup must be configured correctly in the network setup.
Note
NoteThe
FTP setup
FTP is available only when alarm happens,or alarm activates record and snapshot,it will upload related
record and snapshot pictures to FTP server.
65
Picture 4.28 FTP setup

EnableClick Enable,then all settings will be available
Server IPIP address for FTP server
PortDomain Port of FTP,default 21
User NameUser name of FTP
PasswordPassword of user
Anonymousenable anonymous,no need setting user name and password
Max File LengthMax length for upload files at every packed,default 128M
Dir Name
The directory of upload file.
Note: The user should be with authority to upload files.
ARSP
Startup DDNS server to add devices and manage it in the DDNS server
Picture 4.29 ARSP

66
[Type]
[Enable]:
choose "DNS"
means it is chosen
[Sever IP]: IP address of DDNS server

[Port]: Port No. of device, related DDNS server listen port
[User name] the user name that device can log in DDNS server
[Password] the password related to the user name.
[Refresh cycle]Time interval between device and DDNS when chynchronously.
Note: Please set up server before using DDNS.
Alarm center
Alarm
center
When alarm occurring, report alarm information to alarm server.
Pic: 4.30 alarm server setting

Protocol typeGENERAL
EnableTo tick it means enable.
Server IPIP address of Alarm Server
PortDevice Port No.
Alarm ReportTick it means to report alarm information to server.
Log ReportTick it, means to report log to server.
Wireless Config
ADSL through 3G net card,use CMS to visit and config the device
67
Picture 4.31
Wireless Config
EnableChoose Enable to make all settings available

TypeDial type,default AUTO
Wireless AP3G access point
Dial Number3G Dial Number
User NameUser name of 3G
PasswordPassword of dial user
IP AddressIP address,got from dial
parts of A series and T series don't support this function.
Note
Noteparts
Mobile Monitor Setup
To visit the device by mobile,please make a router mapping of this port and use CMS to monitor and
operate it by protocol.
Picture 4.32
Mobile Monitor Setup
Enable Select it to make sure abnormal function workable

Port
Its a port of mobile monitoring which you need to make a router mapping of if want to visit
68
it by mobile
UPNP
UPNP protocol is to realize auto port forwarding on router, precondition of using this function is to
make sure the UPNP function of router is enabled.
Picture 4.33
UPNP
EnableChoose Enable to make sure all UPNP settings available

HTTPRoute will automatically distribute HTTP port for the device,when IE viewing,it need this
port
TCPRouter will automatically distribute TCP port for the device,when monitoring via CMS,it need
this port.
Mobile PortRouter will automatically distribute Mobile Port for the device,when mobile monitor,it
need this port.
WIFI
DVR connect to wireless router via WIFI module, then to visit it through IP address, the precondition
of using this function is to make sure the DVR have connected with WIFI modern.
69
Pic 4.34 WIFI configure

Searchclicksearchto search all the available wireless device in current range.
enable
tick it to enable firstly, then go for further setting.
auto obtain IP addresstick it to enable, device will auto obtain a WIFI IP.
SSIDwireless LAN name, auto match to the wireless device u connected.
Passwordwireless network password of router
IP address: to set the IP address of device, default is 192.168.1.12
subnet mask:set subnet mask of device, default is 255.255.255.0
gatewayset gateway of device, default is 192.168.1.1
RTSP
To do surveillance via cross-browser (Safari, Firefox, Google chrome ) and VLC software. This
function only for monitor but can not control the device.
Pic 4.35 RTSP setting

Enable means enable, tick it firstly before setting.
Port
the default port is 554
70
4.4.5 GUI Display
Configure the video output parameters including the front output mode and encode output mode.
Front outputIn the local preview mode include: channel title, time display, channel display, record
status, alarm status, transparency and region cover.
Encode outputIn the network surveillance and video file mode include: channel title, time display,
channel display, record status, alarm status, transparency and region cover.
:Only 6000 series product support preview resolution - 1920*1280
(1080P)
*Remark
*Remark:Only
1920*1280(1080P)
The GUI display page under hybrid(HVR) mode and all analog(DVR) mode
The GUI display page under full digital(NVR) channel

71
Pic 4.36 output mode

Channel TitleClick the channel name modify button and enter the channel name menu. Modify
the channel name. The 16 Chinese characters and 25 letters are supportive.
Time Display means the selective state. Display the system data and time in the surveillance
window.
Channel display means the selective state. Display the system channel number in the
surveillance window.
Record Statusmeans the selective state. Display the system recording status in the surveillance
window.
Alarm Status means the selective state. Display the system alarm status in the surveillance
window.
TransparencyChoose the background image transparency. The range is 128~255.
Resolutionset display resolution.
ChannelChoose the set code output channel number.
Region Covermeans the selective state. Click the cover area button and enter the corresponding
channel window. You can cover the arbitrary using mouse. (Black region is for output)
Time displayand Channel display set the display position of channel title and time title.
*the channel no., region cover, time title and channel title setting function exist at output
(HVR) mode or full analog
(DVR) mode.
mode only when the device is under hybrid
hybrid(HVR)
analog(DVR)
4.4.6 PTZ device /RS485 device

* when under hybrid mode/full digital mode, it shows with PTZ device and RS485 device,
72
Pic 4.37 PTZ configure

ChannelChoose the dome camera input channel.
ProtocolChoose the corresponding dome protocol. (PELCOD as an example)
Address Set as the corresponding dome address. Default: 1. Note The address must be
consistent with the dome address.
BaudrateChoose the corresponding dome baud rate length. You can control the PTZ and vidicion.
Default: 115200.
Data bitsInclude 5-8 options. Default: 8.
Stop bitsInclude 2 options. Default: 1.
ParityInclude odd check, even check, sign check, blank check. Default: void.
*When under full digital mode, it will show RS485 device.
73
4.38 RS485 device

Protocolchoose related protocol of brand model( for example: DaHua)
Addressset with corresponding address, default is 1
Baud ratechoose bard rate that related device use, default is 115200
Data bitsincluding 5-8 optionsdefault is 8
Stop bitsincluding 2 options, default is 1
ParityInclude odd check, even check, sign check, blank check. Default: void.
when analog channel existing, there will be PTZ and RS485 at PTZ setting, if device
Remark
Remarkwhen
(NVR) mode, it will show RS485 only.
is all digital
digital(NVR)
4.4.7 RS232
*T series do NOT support this function.
74
Pic 4.39 serial port setting

Serial Port FunctionCommon serial port is used to debug and update program or set up specific
serial port.
Baud rateChoose the corresponding baud rate length.
Data bitsInclude 5-8 options.
Stop bitsInclude 2 options.
ParityInclude odd, even, mark, space, default is none.
4.4.8 Tour
Set the patrol display. means that the tour mode is enable. You can choose the single-view,
four-view, six-view of single mode tour or hybrid mode tour.
75
Pic 4.40 tour configure

intervalSet the patrol switch interval. The set range is 5-120 seconds.
alarm tourset the interval to shift alarm tour, range is 5-120 seconds, choose return when alarm
ends, when alarm link to tour, system will auto shift to six-view after alarm finished.
Remark
Remarkat preview mode, click upper right icon
can turn on / off tour
mean turn on,
mean turn off.
4.4.9 Spot configure

*Remark: only part of 6000 series product can support this function
To set TV tour display with sport port, means enable mode tour, you can choose single-view,
four-view, nine-view for single mode tour or hybrid mode tour. When tour enables, no matter what u
operate on VGA side, there is only the spot tour image output on TV side, no GUI displayed,
Pic 4.41 Spot configure

intervalSet the patrol switch interval. The set range is 5-120 seconds.
4.5.0 Channel manage

only HVR and 6000 series product support this function.
*Remark
*Remarkonly
Digital manage including digital channel, channel status, and channel mode (Remark: there is only
analog mode if device is under full analog mode)
mode):
76
Channel manage page under all analog(DVR) mode
Channel manage page under Hybrid(HVR) mode / full digital(NVR) mode

Pic 4.42 channel manage interface
Digital channel:
77
Single link page of digital channel
Multi-linkage page of Digital channel

Pic 4.43 digital channel interface
Channelselect channel title

EnableOpen digital channel, tick enable, then can do related settings
Time SynchronizationTick it means the time of this channel and device is the same.
Connection Modecan be singe connect or multi-ink, multi-link modes can connect to several
devices, device will be tour displayed one by one, tour interval can be set, no less then 10s;
DeleteIf the user want to change device, select the existing device, click delete will be ok.
Addclick add will come out below page to add new device
78
Pic 4.44 remote channel configure page

Configure Namedevice is with default configure title, user can revise it if necessary
Device Type3 types: IPCDVRHVRuser can choose as what you like, default is IPC
ProtocolDefault is TCP
Remote channel User can input remote channel title from the device that you want to connect
remotely
StreamDefault is main stream, do not support extra-stream at present
Device addressIP address of device.
PortDefault is 34567
User nameDefault is admin
search
will show all the devices that searched out, user can choose any of the
Remark: click search
searchwill
device that you like.
Pic 4.45 the device list searched under remote channel setting
79
Channel Status
Status::
channel status is to show the status of all the digital channel When there is what existing, status
including Max Resolution, This Resolution, Connection Status.
For example: The channel status for 4+2 mode is as below:
When a channel is added with device but it is not enable, you will see as below:
Channel status interface under full digital(NVR) mode (One of the channel without device)
80
Remark: when the current resolution is over the max resolution that the channel supported, then
a red X will be shown on the preview image, for example: Under full digital channel mode, Max
resolution of channel 3 is D1, if it was connected to a device with resolution over D1 ( such as
960H), you will see below pic:
Channel mode:
Remark: this series of product with full analog channel mode, hybrid mode and full digital mode,
and different model with different channel mode, user can shift the mode freely if necessary.
81
4.5 Advanced
Manage tools menu including: HDD manage, account manage, online user, output adjust, auto maintain,
upgrade.
4.5.1 HDD Manage
Configure and manage the hard disk. The menu displays current hard disk information: hard disk
number, input port, type, status and overall capability. The operation include: setup the write-read disk,
read-only disk, redundant disk, hard disk format, resume default. Choose the hard disk and click the right
function button to execute.
Note
NoteRead/Write Disk: The equipment can write or read data.
Read-only Disk: The equipment can read data but can not write data.
Redundant Disk: Double backup the video files in the write-read disk.
Pic 4.46 HDD manage
4.5.2 Account
Manage the user purview.

Note
Note1. The character length is 8 bytes at most for the following user and user team name. The blank
ahead or behind the character string is invalid.The middle blank in the character string is valid.
Legal characters include: letter, number, underline, subtraction sign, dot.
82
2. There is no limit in the user and user group. You can add or delete the user group according to
user definition. The factory setup include: user\admin. You can set the team as you wish. The user
can appoint the purview in the group.
3. The user management include: group/ user. The group and user name can not be the same. Each
user only belongs to one group.
Pic 4.47 account management

Modify UserModify the existed user attribute.
Modify GroupModify the existed team attribute.
Modify PasswordModify the user password. You can set 1-6 bit password. The blank ahead or
behind the char string is invalid. The middle blank in the char string is valid.
The user who possess the user control purview can modify his/her own or other users
Note
NoteThe
password
83
Pic 4.48 modify password

Add userAdd a user in the group and set the user purview. Enter the menu interface and input
the user name and password. Choose the team and choose whether cover using the user. Cover using
means that the account can be used by multiple users at the same time.
Once choose the team the user purview is the subclass of the team.
We recommend that the common users purview is lower than the advanced user.
Pic 4.49 Add User

Add GroupAdd a user group and set the purview. There are 33 different purviews: shut down the
equipment, real time surveillance, playback, record setting, video backup and so on.
84
Pic 4.50 add group

Delete UserDelete the current user. Choose the user and click delete user button.
Delete GroupDelete the current group. Choose the group and click delete group button.
Pic 4.51 Delete Group

4.5.3 Online user
To check the information of network user that connected with local device, also can tick the selected
user to break up connection,make at the boxthen the user will be frozen after connection stopped,
and will not log in until device reboot.
Pic 4.52 online user
85
4.5.4 TV adjust
Refer to chapter 3.5.7 .
4.5.5 Auto Maintain
The user can set the time to auto reboot and auto delete file.
Picture 4.39 Auto maintain
4.5.6 Restore
The system restore to the default . You can choose the items according to the menu.
Pic 4.54 restore to default
86
4.5.7 Upgrade
Pic 4.55 Upgrade
choose USB interface.

Upgradechoose
choose the upgrade file.
Upgrade filechoose
4.5.8 Device Info

Provide device interface info like audio in,alarm in/out to be conveniently used for user.
Pic 4.56 device info

4.5.9 Import / Export
Users can export the log info and the configure file from device to connected flash stick, and also can
import related configure file from flash stick to settings, which greatly bring convenience to the
customers.
87
4.57 Import / Export interface
4.6 Info
Display the hard disk information, including HDD info, code stream statistic, log info, version info
4.6.1 HDD info
Display the hard disk state: hard disk type, overall capability, residual capability, the recording time
and so on.
88
Pic 4.58 HDD info

Tips
Tips means that the hard disk is normal. X means that the hard disk is broken-down.- means that
there is
no hard disk. If the user need to change the damaged hard disk, you must shut down the DVR
and take up all the damaged hard disks,then install a new one.
* behind serial number means the current working disk such as 1*. If the corresponding disk is
damaged, the information will show .
4.6.2 BPS
Display the code streamKb/Sand hard disk capability MB/Hin real time. It displays as the wave
sketch map.
Pic 4.59 BPS
4.6.3 LOG
To search log information base on the set search mode.

Log information include: system operation, configuration operation, data management, alarm affair,
recording operation, user management, file management and so on. Set the time section to look up and
click the look up button. The log information will display as a list. (one page is 128 items) Press Page up
or Page down button to look up and press delete button to clear all the log information.
89
Pic: 4.60 Log information
4.6.4 Version
Display the basic information such as hardware information, software version, issue date, serial
number , NAT status and so on.
Pic 4.61 version information
4.7 Shut down system

90
Chapter 5: Cloud Technology Basic Operation

5.1 Cloud technology monitor
Cloud technology make the device one step on net, greatly bring convenience for customer to
monitor via wide area network, this technology is using the serial no to visit device.
*Remark
the device that using cloud technology should be in the WAN( Wide Area
*Remarkthe
Network )firstly.
Check the connecting status of cloud technology

Connect device to WAN firstly, then enterMain menu>Info>Versionto check whether the
device successfully connect to the cloud server or not.
Connect failed interface
successfully connect interface
Pic 5.1 cloud technology server connection status
Log in cloud server

Visit http://xmeye.net to see below log in page, it devided into two mode: by user and by device
device,
user can base on their need to log in freely.
*Remark: to log in by user
user, the user need to register at the first time.
91
Log in by user
Customer use their registered user name and password to log in, will see below
interface
Pic 5.3 cloud technology operation interface

Device manage
Mainly use to add device, click addto add the serial number of device to be monitored.
92
Pic 5.4 device manage interface
Pic 5.5 add interface at device manage

in pic 5.5, the user name means the user name of monitored device, password
*Remark
*Remarkin
means the password of related user.
My Device
Mainly show all the added device here, click the on-line device name, can access to control this
device accordingly.
93
Pic 5.6 monitor page - log in by user

the icon of
*Remark
*Remarkthe
of
means offline, the device do not connect to server successfully.
Log in by device
94
Pic 5.7 interface of log in by device
Input the serial number of device and the verify code to monitor and control the device directly.
Pic: 5.8 monitor page - log in by device
95
6 FAQ and maintenance

6.1 FAQ
If the problems are not listed, please contact the local service or call the HQ service. We are willing
to offer the service.
1
The DVR can not boot up normally.

Possible reasons are as followed:
The power supply is not correct.
Switch power supply line is not in good connection.
Switch power supply is damaged.
The program updating is wrong.
The hard disk is damaged or the hard disk lines are broken.
The front panel is damaged.
The main board of the DVR is damaged.
The DVR reboots automatically or stops working after boot up a few minutes.
The input voltage is not stable or too low.
The hard disk is damaged or the hard disk lines are broken.
The power of the switch power supply is low.
Frontal video signal is not stable.
Bad heat radiator or too much dust or bad running circumstance for the DVR.
The hardware of the DVR is damaged.
System can not detect hard disk.

1
The hard disk power supply line is not connected.
The cables of the hard disk are damaged.
The hard disk is damaged.
The SATA port of main board is damaged.
96
There are no video outputs in single channel, multiple channels and all channels.
The program is not matched. Please update the program.
The image brightness is all 0. Please restore the default setup.
There is no video input signal or the signal is too weak.
The channel protection or the screen protection is set.
Real-time image problems such as the image color or the brightness distortion.
1
When using the BNC output, the option between the N mode or PAL mode is wrong and the
image becomes black and white.
The DVR is not matched the monitor impedance.
The video transmission distance is too far or the loss of the video transmission line is too
large.
4
6
The color and brightness setting of the DVR is wrong.
I can not find the video files in local playback mode.

The data line of the hard disk is damaged.
Update the different program with the origin program files.
The video files to look up are covered.
The recording is not on.
The local video is not clear.

The image quality is too bad.
The reading program is wrong. Reboot up the DVR.
The data line of the hard disk is damaged.
There is no audio signal in the surveillance window.

97
It is not an active tone arm.
It is not an active sound box.
The audio lines are damaged.
There is audio signal in the surveillance window but mo audio signal in the playback
state.
10
10
Setting issues: the audio option is not chosen.
The according channel is not connected with the video.
The time is wrong.

11
11
Setting is wrong..
The battery is in bad connection or the voltage is too low.
The oscillation is damaged.
The DVR can not control the PTZ.

1
There is something wrong with the frontal PTZ.
The setting, connection or the installation of the PTZ decoder is not correct.
The connections are not correct.
The PTZ setting of the DVR is not correct.
The protocols of the PTZ decoder and the DVR are not matched.
The address of the PTZ decoder and the DVR are not matched.
When multiple decoders are connected, the far port of the PTZ decoder line A(B) must
connect a 120
resistance to reduce the reflection otherwise the PTZ control is not
stable.
8
12
12
The distance is too far.
The motion detect is not working,

1
The time range set is not correct.

98
13
13
The motion detect area set is not correct.
The sensitivity is too low.
Limited by some hardware edition.
I can not login via web or CMS.

1
The system is windows 98 or win me. We recommend updating to windows 2000sp4 or

higher Version or installing the software for low edition.
14
14
ActiveX is hold back.
The version is not exceeded dx8.1. Update the display card driver.
Network connection failure.
Network setting issues.
Invalid password or user name.
The CMS is not matched the DVR program version.
The image is not clear or there is no image in network preview state or video file playback
state.
15
15
Network is not stable.
The user machine is resource limited.
Choose the play-in-team mode in the network setup of DVR.
The region shelter or channel protection is set.
The user has no surveillance purview.
The real-time image of the hard disk recording machine itself is not clear.
Network connection is not stable.

16
16
Network is not stable.
IP address is conflicted.
MAC address is conflicted.
The net card of the DVR is bad.
There is something wrong with the USB backup or writing a CD.

99
17
17
The rewritable machine and the hard disk are shared the same data lines.
The data is too much. Please stop recording and backup.
The data exceeds the backup storage.
The backup equipment is not compatible.
The backup equipment is damaged.
The keyboard can not control the DVR.

1
The serial port of the DVR is not set correctly.
The address is not correct.
When multiple transformers are connected, the power supply is not large enough. Please
give each transformer individual power supply.
4
18
18
The distance is too far.
Alarm can not be recessional.

19
19
The setting of the alarm is not correct.
The alarm output is turned on manually.
The input machine is damaged or the connections are not correct.
There are some problems for specific program edition, Please update the program.
Alarm is not working.

20
20
The setting of the alarm is not correct.
The connection of the alarm is not correct.
The alarm input signal is not correct.
A alarm is connected with two loops synchronously.
The remote controller is not working,

1
The remote control address is not correct.
The remote control distance is too far or the angle is too large.
The battery is used up.
The remote controller or the front panel of the recording machine is damaged.
100
21
21
The storage time is not enough.

22
22
Front vidicon quality is bad. The lens is too dirty. The vidicon is in backlighting installation.
The hard disk capability is not enough.
The downloading files can not play.

1
There is no media player.
There is no DX8.1 software or higher edition.
There is no DivX503Bundle.exe file to play AVI video files.
The DivX503Bundle.exe and ffdshow-2004 1012 .exe files must be installed in the windows
xp system.
23
I can not remember the advanced password or network code in the local menu operation.
Please contact the local service or call the HQ service. We will offer the service according the
machine type and the program edition.

24
24
Can not see the preview picture the digital channel

1 Did not add device
2 The device of related channel was not enable
3 The device of related channel was not selected.
4 The selected device did not connect to video sources
5 The channel title of selected remote device is not exist.
6 Stream for remote channel was set by extra stream.
7 User name & password not matched
8 directly input with IP address or port No. incorrectly when adding device.
9. The resolution of added device is too large to display by the monitor.
25
25
Click search
search why not search out any of the device.
1 There is no other device exist in the Local area network
2 The subnet mask setting incorrectly on Network settings.
101
26
26
The snapshot at alarm function was enable, why not catch picture
1 HDD manage without partition for snapshot.
2 Partition for snapshot is 0
3 The snapshot function is not enable on record-> storage of related channel.
27
27
The time shows on digital channel is not the same as local side:
Enable the time synchronous function of digital channel.
28
28 Can not see preview picture of analog channel
1 The camera did not connect to video interface
2 The device did not connect to video source
3 Video source is broken.
Picture will be frozen when multi-connection and shift devices.
29
29Picture
Picture come out from digital channel need few seconds, shift device means to show new picture, so
it needs several seconds to buffer.
6.2 Maintenance
1
Please brush printed circuit boards, connectors, fans, machine box and so on regularly.
Please keep the grounding well done to prevent the video or audio signal interfered and the
DVR from static or inductive electricity.
Do not pull out the video signal line or RS-232 port or RS-485 port with the power on.
Do not use the TV in the local video output port(VOUT) of DVR. It will damage the video
output circuit easily.
Do not turn off the switch directly. Please use the turn-off function in the menu or press the
turn-off button in the panel (3 seconds or longer) to protect the hard disk.
Please keep the DVR away from heat resource.
Please keep the DVR ventilated for better heat radiator.
Please check the system and maintain regularly.
102
Appendix 1.Remote controller operation
Serial
Name
Function
Multi-window
Same function as Multi-window button in the front
number
1
button
panel
Numeric button
Esc
Direction button
Same function as direction button in the front panel
Record control
Control the record
Record mode
Same function as Record mode
ADD
FN
Code input/number input/channel switch

Same function asEscbutton in the front panel
Input the number of DVR to control it

Assistant function
103
Appendix 2.Mouse operation

*Take right hand as an example
The mouse in USB connection is supported.
Operation
Function
Double click one item in the file list to playback the
video
Double click the playback video to zoom in or out the
Double left click

screen
Double click the channel to make it full screen display
double click again to resume the multi-window display
Left click
Right click
Choose the according function in the menu

Pop desktop shortcut menu in preview state
Current shortcut menu in the menu
Press middle
button
Add or subtract number in the number setting

Switch the items in the combo box
Page up or down in the list
Move mouse
Choose the widget or move the item in the widget

Set the motion detect area
Drag mouse
Set the cover area
104
Appendix 3.Hard disk capability calculation

Make sure the hard disk installed to the DVR for the first time. Pay attention to the IDE hard disk
lines connection.
1 Hard disk capability
There is no limit for recording machine. We recommend 120G~250G size to keep better
stability.
2 Overall capability option
The hard disk capability formula is:
Overall capabilityM=channel number*timehour*capability in an hourM/hour
The recording time formula is:
overall capabilityM
Recording timehour=
Capability in an hourM/hour*channel number

The DVR introduces the H.264 compression technology. Its dynamic range is very large so the
hard disk capability calculation is based on the estimation values of each channel creating files in
an hour.
Example:
For one piece 500G HDD,real time CIF for recording,it will keep recording for about 25 days.HDD
spaces per channel is 200M/H,if 4channels real time CIF at 24hours recording uninterrupted,it can
last:500G/(200M/H*24H*4ch)=26 days
105

DVR User Manual PDF

Uploaded by

Copyright:

Available Formats

DVR User Manual PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DVR User Manual PDF

Uploaded by

Copyright:

Available Formats

User's installation and operation Manual

Important Safeguards and Warding

2.7.3 Alarm output port relay parameters........................................................................................... 21

1.2 Main functions

special storage format which insures the data safety

2 Open-package check and cable connections

Front panel and rear panel

2.2 Hard disk installation

disassemble the screw

fix the screw of hard disk

cover the machine

disassemble the cover

connect the data wire

fix the cover

fix the screw of hard disk

connect the power wire

2.3 Shelf installation

2.4 Front panel

(1) Power indicator light

(2) Record indicator light

(3)Alarm indicator light

The front panel of A series

(1) Power switch

The front panel of C series

(1) Shift indicator light

(2) System indicator light

(3) Alarm indicator

(5) Outside operation

(6) network indicator light

(7)HDD indicator light (8) Next File

(10) Play Pause

(11) Next Frame

(13) Function Switching (14) Direction&Enter

(4) Record indicator

(15) IR remote receiver (16) Previous File

(17) Slow Play

(18) Backwards Pause (19) Previous Frame

(22) Power switch

The front panel of E series

(1) Power indicator light

Shift indicator light (3)

System operation (4)

Outside operation (7)

Network indicator (8)

HDD indicator light

(9) Function switch

(12) Power switch

(13) Previous File

(14) Next File

(15) Slow Play

(16) Fast Play

(17) Backward Pause

(18) Play Pause

(23) IR remote receiver

The front panel of F series

(4) Playback pause/8

(5) Playback stop/9

(9) Main Menu/0

(C) PTZ control/3