0% found this document useful (0 votes)
1 viewsCE3050: Basic Structural Steel Design Even Semester July-Nov 2013 Tutorial 3
The document contains three problems related to structural steel design:
1) Calculate the design load capacity of a column made of WPB 200x200x83.52 steel with grade E250 and lateral supports.
2) Calculate the design load capacity of a column made of 172x92x4.8 HF RHS steel with grade E250 and rigid ends.
3) Design a single equal angle to carry a compression load of 50 kN over a 2m distance between connections using at least two bolts.
Uploaded by
RajaKuppanCopyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
1 viewsCE3050: Basic Structural Steel Design Even Semester July-Nov 2013 Tutorial 3
The document contains three problems related to structural steel design:
1) Calculate the design load capacity of a column made of WPB 200x200x83.52 steel with grade E250 and lateral supports.
2) Calculate the design load capacity of a column made of 172x92x4.8 HF RHS steel with grade E250 and rigid ends.
3) Design a single equal angle to carry a compression load of 50 kN over a 2m distance between connections using at least two bolts.
Uploaded by
RajaKuppanCopyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
/ 1
CE3050: Basic Structural Steel Design
Even Semester July-Nov 2013
Tutorial 3
1. WPB 20020083.52 (IS 12778:2004) is used as a column. The column is laterally
supported in the plane of the major axis at the height of 3.5 m and in the plane of the minor
axis at the height of 2.5 m. Both the ends may be assumed as hinged. What is the design
load carrying capacity of the column. The grade of the steel is E250.
2. 172924.8 HF RHS (IS 4923 : 1997) is used as a column. What is the design load carrying
capacity of the column. The grade of the steel is E250. Assume that the ends of the column
are rigidly connected.
3. Design a single equal angle to carry a compression of 50 kN. The center to center distance
between the end connections is 2 m. Assume that at least two bolts are used for the end
connection.
CE3050: Basic Structural Steel Design
Even Semester July-Nov 2013
Tutorial 3
1. WPB 20020083.52 (IS 12778:2004) is used as a column. The column is laterally
supported in the plane of the major axis at the height of 3.5 m and in the plane of the minor
axis at the height of 2.5 m. Both the ends may be assumed as hinged. What is the design
load carrying capacity of the column. The grade of the steel is E250.
2. 172924.8 HF RHS (IS 4923 : 1997) is used as a column. What is the design load carrying
capacity of the column. The grade of the steel is E250. Assume that the ends of the column
are rigidly connected.
3. Design a single equal angle to carry a compression of 50 kN. The center to center distance
between the end connections is 2 m. Assume that at least two bolts are used for the end
connection.
CE3050: Basic Structural Steel Design
Even Semester July-Nov 2013
Tutorial 3
1. WPB 20020083.52 (IS 12778:2004) is used as a column. The column is laterally
supported in the plane of the major axis at the height of 3.5 m and in the plane of the minor
axis at the height of 2.5 m. Both the ends may be assumed as hinged. What is the design
load carrying capacity of the column. The grade of the steel is E250.
2. 172924.8 HF RHS (IS 4923 : 1997) is used as a column. What is the design load carrying
capacity of the column. The grade of the steel is E250. Assume that the ends of the column
are rigidly connected.
3. Design a single equal angle to carry a compression of 50 kN. The center to center distance
between the end connections is 2 m. Assume that at least two bolts are used for the end
connection.
