Job No Sheet No Rev

1
Part
Software licensed to santas
Job Title Ref

By Date27-Dec-09 Chd

Client File SISTEM.std Date/Time 27-Dec-2009 13:27

Job Information
Engineer Checked Approved

Name:
Date: 27-Dec-09

Structure Type PLANE FRAME

Number of Nodes 15 Highest Node 15

Number of Elements 14 Highest Beam 14

Number of Basic Load Cases 3

Number of Combination Load Cases 2

Included in this printout are data for:

All The Whole Structure

Included in this printout are results for load cases:

Type L/C Name

Primary 1 ZATI
Primary 2 KAPLAMA
Primary 3 KAR
Combination 4 COMBINATION LOAD CASE 4
Combination 5 COMBINATION LOAD CASE 5

Nodes
Node X Y Z
(m) (m) (m)
1 0.000 0.000 0.000
2 0.000 7.000 0.000
3 18.000 0.000 0.000
4 18.000 7.000 0.000
5 9.000 9.500 0.000
6 7.500 9.083 0.000
7 6.000 8.667 0.000
8 4.500 8.250 0.000
9 3.000 7.833 0.000
10 1.500 7.417 0.000
11 16.500 7.417 0.000
12 15.000 7.833 0.000
13 13.500 8.250 0.000
14 12.000 8.667 0.000
15 10.500 9.083 0.000

Print Time/Date: 21/06/2010 14:26 STAAD.Pro for Windows 20.07.04.12 Print Run 1 of 7
 Job No Sheet No Rev
2
Part
Software licensed to santas
Job Title Ref

By Date27-Dec-09 Chd

Client File SISTEM.std Date/Time 27-Dec-2009 13:27

Beams
Beam Node A Node B Length Property 
(m) (degrees)
1 1 2 7.000 2 0
2 3 4 7.000 2 0
3 4 11 1.557 1 0
4 5 6 1.557 1 0
5 6 7 1.557 1 0
6 7 8 1.557 1 0
7 8 9 1.557 1 0
8 9 10 1.557 1 0
9 10 2 1.557 1 0
10 11 12 1.557 1 0
11 12 13 1.557 1 0
12 13 14 1.557 1 0
13 14 15 1.557 1 0
14 15 5 1.557 1 0

Section Properties
Prop Section Area Iyy Izz J Material
(cm2) (cm4) (cm4) (cm4)
1 IPE270 45.900 420.000 5.79E+3 12.041 STEEL
2 IPE270 45.900 420.000 5.79E+3 12.041 STEEL

Materials
Mat Name E  Density 
(MTon/m2) (kg/m3) (1/°K)
1 STEEL 20.9E+6 0.300 7.83E+3 12E -6
2 STAINLESSSTEEL 20.2E+6 0.300 7.83E+3 18E -6
3 ALUMINUM 7.03E+6 0.330 2.71E+3 23E -6
4 CONCRETE 2.21E+6 0.170 2.4E+3 10E -6

Supports
Node X Y Z rX rY rZ
(kN/mm) (kN/mm) (kN/mm) (kN-m/deg) (kN-m/deg) (kN-m/deg)
1 Fixed Fixed Fixed Fixed Fixed Fixed
3 Fixed Fixed Fixed Fixed Fixed Fixed

Releases
There is no data of this type.

Print Time/Date: 21/06/2010 14:26 STAAD.Pro for Windows 20.07.04.12 Print Run 2 of 7
 Job No Sheet No Rev
3
Part
Software licensed to santas
Job Title Ref

By Date27-Dec-09 Chd

Client File SISTEM.std Date/Time 27-Dec-2009 13:27

Basic Load Cases

Number Name

1 ZATI
2 KAPLAMA
3 KAR

Combination Load Cases

Comb. Combination L/C Name Primary Primary L/C Name Factor

4 COMBINATION LOAD CASE 4 1 ZATI 1.00

2 KAPLAMA 1.00
5 COMBINATION LOAD CASE 5 1 ZATI 1.00
2 KAPLAMA 1.00
3 KAR 1.00

Load Generators
There is no data of this type.

Selfweight : 1 ZATI
Direction Factor

Y -1.000

Node Loads : 2 KAPLAMA

Node FX FY FZ MX MY MZ
(Mton) (Mton) (Mton) (MTon-m) (MTon-m) (MTon-m)
2 - -0.050 - - - -
4 - -0.050 - - - -
5 - -0.100 - - - -
6 - -0.100 - - - -
7 - -0.100 - - - -
8 - -0.100 - - - -
9 - -0.100 - - - -
10 - -0.100 - - - -
11 - -0.100 - - - -
12 - -0.100 - - - -
13 - -0.100 - - - -
14 - -0.100 - - - -
15 - -0.100 - - - -

Print Time/Date: 21/06/2010 14:26 STAAD.Pro for Windows 20.07.04.12 Print Run 3 of 7
 Job No Sheet No Rev
4
Part
Software licensed to santas
Job Title Ref

By Date27-Dec-09 Chd

Client File SISTEM.std Date/Time 27-Dec-2009 13:27

Node Loads : 3 KAR

Node FX FY FZ MX MY MZ
(Mton) (Mton) (Mton) (MTon-m) (MTon-m) (MTon-m)
2 - -0.375 - - - -
4 - -0.375 - - - -
5 - -0.750 - - - -
6 - -0.750 - - - -
7 - -0.750 - - - -
8 - -0.750 - - - -
9 - -0.750 - - - -
10 - -0.750 - - - -
11 - -0.750 - - - -
12 - -0.750 - - - -
13 - -0.750 - - - -
14 - -0.750 - - - -
15 - -0.750 - - - -

Node Displacement Summary

Node L/C X Y Z Resultant rX rY rZ
(mm) (mm) (mm) (mm) (deg) (deg) (deg)
Max X 4 5:COMBINATION LOAD
38.647
CASE 5-0.406 0.000 38.649 0.000 0.000 0.496
Min X 2 5:COMBINATION LOAD
-38.647
CASE 5-0.406 0.000 38.649 0.000 0.000 -0.496
Max Y 1 1:ZATI 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Min Y 5 5:COMBINATION LOAD
0.000
CASE-140.802
5 0.000 140.802 0.000 0.000 0.000
Max Z 1 1:ZATI 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Min Z 1 1:ZATI 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Max rX 1 1:ZATI 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Min rX 1 1:ZATI 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Max rY 1 1:ZATI 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Min rY 1 1:ZATI 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Max rZ 12 5:COMBINATION LOAD
23.394
CASE -55.797
5 0.000 60.503 0.000 0.000 1.315
Min rZ 9 5:COMBINATION LOAD
-23.394
CASE -55.797
5 0.000 60.503 0.000 0.000 -1.315
Max Rst 5 5:COMBINATION LOAD
0.000
CASE-140.802
5 0.000 140.802 0.000 0.000 0.000

Beam End Displacement Summary

Displacements shown in italic indicate the presence of an offset
Beam Node L/C X Y Z Resultant
(mm) (mm) (mm) (mm)
Max X 2 4 5:COMBINATION LOAD
38.647
CASE 5-0.405 0.000 38.649
Min X 1 2 5:COMBINATION LOAD
-38.647
CASE 5-0.405 0.000 38.649
Max Y 1 1 1:ZATI 0.000 0.000 0.000 0.000
Min Y 4 5 5:COMBINATION LOAD
0.000
CASE-140.802
5 0.000 140.802
Max Z 1 1 1:ZATI 0.000 0.000 0.000 0.000
Min Z 1 1 1:ZATI 0.000 0.000 0.000 0.000
Max Rst 4 5 5:COMBINATION LOAD
0.000
CASE-140.802
5 0.000 140.802

Print Time/Date: 21/06/2010 14:26 STAAD.Pro for Windows 20.07.04.12 Print Run 4 of 7
 Job No Sheet No Rev
5
Part
Software licensed to santas
Job Title Ref

By Date27-Dec-09 Chd

Client File SISTEM.std Date/Time 27-Dec-2009 13:27

Beam End Force Summary

The signs of the forces at end B of each beam have been reversed. For example: this means that the Min Fx entry gives the largest tension
value for an beam.
Axial Shear Torsion Bending
Beam Node L/C Fx Fy Fz Mx My Mz
(Mton) (Mton) (Mton) (MTon-m) (MTon-m) (MTon-m)
Max Fx 2 3 5:COMBINATION LOAD
5.688
CASE 5 2.860 0.000 0.000 0.000 8.513
Min Fx 4 5 1:ZATI 0.171 0.048 0.000 0.000 0.000 -0.352
Max Fy 3 4 5:COMBINATION LOAD
4.097
CASE 5 4.063 0.000 0.000 0.000 11.505
Min Fy 9 2 5:COMBINATION LOAD
4.097
CASE 5-4.063 0.000 0.000 0.000 11.505
Max Fz 1 1 1:ZATI 0.588 -0.178 0.000 0.000 0.000 -0.528
Min Fz 1 1 1:ZATI 0.588 -0.178 0.000 0.000 0.000 -0.528
Max Mx 1 1 1:ZATI 0.588 -0.178 0.000 0.000 0.000 -0.528
Min Mx 1 1 1:ZATI 0.588 -0.178 0.000 0.000 0.000 -0.528
Max My 1 1 1:ZATI 0.588 -0.178 0.000 0.000 0.000 -0.528
Min My 1 1 1:ZATI 0.588 -0.178 0.000 0.000 0.000 -0.528
Max Mz 1 2 5:COMBINATION LOAD
5.436
CASE 5-2.860 0.000 0.000 0.000 11.505
Min Mz 2 4 5:COMBINATION LOAD
5.436
CASE 5 2.860 0.000 0.000 0.000 -11.505

Beam Force Detail Summary

Sign convention as diagrams:- positive above line, negative below line except Fx where positive is compression. Distance d is given from
beam end A.
Axial Shear Torsion Bending
Beam L/C d Fx Fy Fz Mx My Mz
(m) (Mton) (Mton) (Mton) (MTon-m) (MTon-m) (MTon-m)
Max Fx 2 5:COMBINATION LOAD
0.000
CASE 5 5.688 2.860 0.000 0.000 0.000 8.513
Min Fx 4 1:ZATI 0.000 0.171 0.048 0.000 0.000 0.000 -0.352
Max Fy 3 5:COMBINATION LOAD
0.000
CASE 5 4.097 4.063 0.000 0.000 0.000 11.505
Min Fy 9 5:COMBINATION LOAD
1.557
CASE 5 4.097 -4.063 0.000 0.000 0.000 11.505
Max Fz 1 1:ZATI 0.000 0.588 -0.178 0.000 0.000 0.000 -0.528
Min Fz 1 1:ZATI 0.000 0.588 -0.178 0.000 0.000 0.000 -0.528
Max Mx 1 1:ZATI 0.000 0.588 -0.178 0.000 0.000 0.000 -0.528
Min Mx 1 1:ZATI 0.000 0.588 -0.178 0.000 0.000 0.000 -0.528
Max My 1 1:ZATI 0.000 0.588 -0.178 0.000 0.000 0.000 -0.528
Min My 1 1:ZATI 0.000 0.588 -0.178 0.000 0.000 0.000 -0.528
Max Mz 1 5:COMBINATION LOAD
7.000
CASE 5 5.436 -2.860 0.000 0.000 0.000 11.505
Min Mz 2 5:COMBINATION LOAD
7.000
CASE 5 5.436 2.860 0.000 0.000 0.000 -11.505

Print Time/Date: 21/06/2010 14:26 STAAD.Pro for Windows 20.07.04.12 Print Run 5 of 7
 Job No Sheet No Rev
6
Part
Software licensed to santas
Job Title Ref

By Date27-Dec-09 Chd

Client File SISTEM.std Date/Time 27-Dec-2009 13:27

Beam Combined Axial and Bending Stresses Summary

Max Comp Max Tens
Beam L/C Length Stress d Corner Stress d Corner
(m) (MTon/m2) (m) (MTon/m2) (m)
1 1:ZATI 7.000 1.74E+3 7.000 3 -1.59E+3 7.000 1
2:KAPLAMA 7.000 3.09E+3 7.000 3 -2.83E+3 7.000 1
3:KAR 7.000 23.2E+3 7.000 3 -21.2E+3 7.000 1
4:COMBINATION LOAD
7.000
CASE4.83E+3
4 7.000 3 -4.42E+3 7.000 1
5:COMBINATION LOAD
7.000
CASE 528E+3 7.000 3 -25.6E+3 7.000 1
2 1:ZATI 7.000 1.74E+3 7.000 1 -1.59E+3 7.000 3
2:KAPLAMA 7.000 3.09E+3 7.000 1 -2.83E+3 7.000 3
3:KAR 7.000 23.2E+3 7.000 1 -21.2E+3 7.000 3
4:COMBINATION LOAD
7.000
CASE4.83E+3
4 7.000 1 -4.42E+3 7.000 3
5:COMBINATION LOAD
7.000
CASE 528E+3 7.000 1 -25.6E+3 7.000 3
3 1:ZATI 1.557 1.72E+3 0.000 3 -1.61E+3 0.000 1
2:KAPLAMA 1.557 3.06E+3 0.000 3 -2.86E+3 0.000 1
3:KAR 1.557 22.9E+3 0.000 3 -21.5E+3 0.000 1
4:COMBINATION LOAD
1.557
CASE4.78E+3
4 0.000 3 -4.47E+3 0.000 1
5:COMBINATION LOAD
1.557
CASE27.7E+3
5 0.000 3 -25.9E+3 0.000 1
4 1:ZATI 1.557 936.335 1.427 1 -855.911 1.297 3
2:KAPLAMA 1.557 1.7E+3 1.557 1 -1.56E+3 1.557 3
3:KAR 1.557 12.7E+3 1.557 1 -11.7E+3 1.557 3
4:COMBINATION LOAD
1.557
CASE2.63E+3
4 1.557 1 -2.41E+3 1.557 3
5:COMBINATION LOAD
1.557
CASE15.4E+3
5 1.557 1 -14.1E+3 1.557 3
5 1:ZATI 1.557 935.358 0.000 1 -854.230 0.000 3
2:KAPLAMA 1.557 1.7E+3 0.000 1 -1.55E+3 0.000 3
3:KAR 1.557 12.8E+3 0.000 1 -11.6E+3 0.000 3
4:COMBINATION LOAD
1.557
CASE2.64E+3
4 0.000 1 -2.41E+3 0.000 3
5:COMBINATION LOAD
1.557
CASE15.4E+3
5 0.000 1 -14.1E+3 0.000 3
6 1:ZATI 1.557 817.595 0.000 1 -729.938 0.000 3
2:KAPLAMA 1.557 1.49E+3 0.000 1 -1.33E+3 0.000 3
3:KAR 1.557 11.2E+3 0.000 1 -9.97E+3 0.000 3
4:COMBINATION LOAD
1.557
CASE2.31E+3
4 0.000 1 -2.06E+3 0.000 3
5:COMBINATION LOAD
1.557
CASE13.5E+3
5 0.000 1 -12E+3 0.000 3
7 1:ZATI 1.557 504.068 0.000 1 -409.883 0.000 3
2:KAPLAMA 1.557 928.750 0.000 1 -755.460 0.000 3
3:KAR 1.557 6.97E+3 0.000 1 -5.67E+3 0.000 3
4:COMBINATION LOAD
1.557
CASE1.43E+3
4 0.000 1 -1.17E+3 0.000 3
5:COMBINATION LOAD
1.557
CASE 58.4E+3 0.000 1 -6.83E+3 0.000 3
8 1:ZATI 1.557 817.534 1.557 3 -710.294 1.557 1
2:KAPLAMA 1.557 1.44E+3 1.557 3 -1.25E+3 1.557 1
3:KAR 1.557 10.8E+3 1.557 3 -9.38E+3 1.557 1
4:COMBINATION LOAD
1.557
CASE2.25E+3
4 1.557 3 -1.96E+3 1.557 1
5:COMBINATION LOAD
1.557
CASE 513E+3 1.557 3 -11.3E+3 1.557 1
9 1:ZATI 1.557 1.72E+3 1.557 3 -1.61E+3 1.557 1
2:KAPLAMA 1.557 3.06E+3 1.557 3 -2.86E+3 1.557 1
3:KAR 1.557 22.9E+3 1.557 3 -21.5E+3 1.557 1
4:COMBINATION LOAD
1.557
CASE4.78E+3
4 1.557 3 -4.47E+3 1.557 1
5:COMBINATION LOAD
1.557
CASE27.7E+3
5 1.557 3 -25.9E+3 1.557 1
10 1:ZATI 1.557 817.534 0.000 3 -710.294 0.000 1
2:KAPLAMA 1.557 1.44E+3 0.000 3 -1.25E+3 0.000 1
3:KAR 1.557 10.8E+3 0.000 3 -9.38E+3 0.000 1

Print Time/Date: 21/06/2010 14:26 STAAD.Pro for Windows 20.07.04.12 Print Run 6 of 7
 Job No Sheet No Rev
7
Part
Software licensed to santas
Job Title Ref

By Date27-Dec-09 Chd

Client File SISTEM.std Date/Time 27-Dec-2009 13:27

Beam Combined Axial and Bending Stresses Summary Cont...

Max Comp Max Tens
Beam L/C Length Stress d Corner Stress d Corner
(m) (MTon/m2) (m) (MTon/m2) (m)
4:COMBINATION LOAD
1.557
CASE2.25E+3
4 0.000 3 -1.96E+3 0.000 1
5:COMBINATION LOAD
1.557
CASE 513E+3 0.000 3 -11.3E+3 0.000 1
11 1:ZATI 1.557 504.068 1.557 1 -409.883 1.557 3
2:KAPLAMA 1.557 928.750 1.557 1 -755.459 1.557 3
3:KAR 1.557 6.97E+3 1.557 1 -5.67E+3 1.557 3
4:COMBINATION LOAD
1.557
CASE1.43E+3
4 1.557 1 -1.17E+3 1.557 3
5:COMBINATION LOAD
1.557
CASE 58.4E+3 1.557 1 -6.83E+3 1.557 3
12 1:ZATI 1.557 817.595 1.557 1 -729.938 1.557 3
2:KAPLAMA 1.557 1.49E+3 1.557 1 -1.33E+3 1.557 3
3:KAR 1.557 11.2E+3 1.557 1 -9.97E+3 1.557 3
4:COMBINATION LOAD
1.557
CASE2.31E+3
4 1.557 1 -2.06E+3 1.557 3
5:COMBINATION LOAD
1.557
CASE13.5E+3
5 1.557 1 -12E+3 1.557 3
13 1:ZATI 1.557 935.358 1.557 1 -854.230 1.557 3
2:KAPLAMA 1.557 1.7E+3 1.557 1 -1.55E+3 1.557 3
3:KAR 1.557 12.8E+3 1.557 1 -11.6E+3 1.557 3
4:COMBINATION LOAD
1.557
CASE2.64E+3
4 1.557 1 -2.41E+3 1.557 3
5:COMBINATION LOAD
1.557
CASE15.4E+3
5 1.557 1 -14.1E+3 1.557 3
14 1:ZATI 1.557 936.335 0.130 1 -855.911 0.259 3
2:KAPLAMA 1.557 1.7E+3 0.000 1 -1.56E+3 0.000 3
3:KAR 1.557 12.7E+3 0.000 1 -11.7E+3 0.000 3
4:COMBINATION LOAD
1.557
CASE2.63E+3
4 0.000 1 -2.41E+3 0.000 3
5:COMBINATION LOAD
1.557
CASE15.4E+3
5 0.000 1 -14.1E+3 0.000 3

Print Time/Date: 21/06/2010 14:26 STAAD.Pro for Windows 20.07.04.12 Print Run 7 of 7