Adi Powders: Shoot With The Best
Adi Powders: Shoot With The Best
Adi Powders: Shoot With The Best
SHOOT WITH
THE BEST 1
N
O
O
S
G
IN
M
O
C
SHOOT WITH
THE BEST!
Take quality to the next level when you
reload with ADI Cartridge Components
2
www.adi-powders.com.au
It is with great pleasure that Thales Australia presents the 5th edition of our reloading
guide. You will certainly notice some differences in this edition, the first of which may
be that we have changed our company name from ADI Limited to Thales Australia
Limited. However, we have retained the ADI Powders brand because the same great
product is made by the same people in the same Australian manufacturing site. Thales
Australia Limited is part of a strong and focussed international business and looks
forward to serving the industry for many years to come.
Secondly, you will notice more data! Through our strong partnership with Hodgdon
Powder Company. Inc. of the USA, we offer a reliable, much expanded range of data
in this guide. Data for 19 new pistol calibres and 23 new rifle calibres has been added
along with new data for existing calibres. The data has been fired under controlled
conditions to ensure safety and repeatability. You will now see additional information
including minimum and recommended starting loads.
All of our reloading information is also available via the internet from our database
located at: www.adi-powders.com.au. The website is updated with new data as it
becomes available, and should be used for the most up to date data.
Finally, you will notice the inclusion of data for a new powder, Trail Boss, which was
released in 2007. We have, and will continue to add new powders to our product range
as they are developed as a result of your requirements and feedback. We are also
proud to use this guide to introduce to you our retail 223 and 0.50 Cal cases, which will
be available from later this year.
We hope you find this guide a valuable tool, and wish to thank you for your support
over the years through the continued purchase of ADI Powders.
Happy Reloading
Rob Wellwood
Manager – Ordnance Sales
Thales Australia
1
Introduction...................................................................................................................... 3
Rifle Cases.................................................................................................................... 14
Reloading Safety........................................................................................................... 16
Warnings ...................................................................................................................... 19
Shotgun Data................................................................................................................ 21
Shotgun Bushing Charts .............................................................................................. 32
Pistol Data..................................................................................................................... 35
Rifle Data....................................................................................................................... 63
Single Action Rifle ...................................................................................................... 157
Single Action Pistol Data............................................................................................. 161
Single Action Shotgun Data......................................................................................... 165
Powder Equivalents . .................................................................................................. 170
Burning Rate Examples . ............................................................................................ 171
ADI Powders
2
ADI Powders cater for the full range of burning rate requirements from the fast burning
handgun and shotgun powders to the very slow large calibre rifle powders.
The shotgun powders are disc powders, double base in composition, covering a wide
range of applications in 12, 20 and 28 gauge loads. All the shotgun powders are
exceptionally clean burning.
ADI handgun powders are smaller diameter disc powders manufactured for uniform
metering through powder loaders. The faster burning powders are double base in
composition for increased energy. The slower burning powders are single base for use
in heavy loads. All the handgun powders are exceptionally clean burning when loaded
correctly.
The rifle powders are single perforated tubular propellants of single base composition.
Thales Australia’s experience in developing powders for the Australian Defence Force
has shown that powders with these characteristics are suitable for use in extreme
climatic conditions. Consequently, all the rifle powders have, as a feature, ballistic
temperature independence; that is, velocities and pressures do not vary greatly with
ambient temperature. This is a unique and major advantage over the performance of
other manufacturers’ rifle powders. In addition, the ADI powders all have good loading
characteristics with respect to bulk density and uniformity of metering through powder
loaders. They are also very clean burning at normal loads.
The new Trail Boss propellant is single base in composition. It is shaped in discs with
an obvious central hole which makes it easy to distinguish from other powders. The
innovative propellant was designed to overcome the excessive space in your case for
more consistent ballistic and safety performance.
All ADI Powders are packed as UN class 1, Hazard Division 1.3C (mass fire risk). ADI
Powders are packed in 500g, 1kg, 1.5kg, 2kg or 4kg containers, depending upon the type
of powder. Thales Australia Limited is Australia’s leading manufacturer of high quality,
proven powders for sporting applications.
3
Thales is a global technology leader for the Aerospace, Space, Defence, Security
and Transport markets. In 2009, the company generated revenues of 12.8 billion
euros (equivalent to A$18.8 billion) with 68,000 employees in 50 countries. With its
25,000 engineers and researchers, Thales has a unique capability to design, develop
and deploy equipment, systems and services that meet the most complex security
requirements. Thales has an exceptional international footprint, with operations around
the world working with customers as local partners. Visit www.thalesgroup.com for
more information.
Thales Australia is a trusted partner of the Australian Defence Force and is also
present in commercial sectors ranging from air traffic management to security systems
and services. Employing around 3,500 people in over 35 sites across the country,
Thales Australia recorded revenues of more than A$1 billion in 2009.
Our propellants are distributed under the trading name of ADI Powders to maintain our
links to over 120 years of experience in ammunition manufacture and nearly 100 years
of powder production. The company can trace its roots to the Colonial Ammunition
Company (1888, Footscray, Victoria) and the Cordite Factory (1911, Maribyrnong,
Victoria). Since then we have seen many changes, but one constant has been our
commitment to providing quality ammunition and components for use in the
defence of our country.
Our ammunition and propellant capabilities have kept pace with rapid
developments in applied technology. Our expertise and capability in energetic
materials is second-to-none in our region. It now includes the production of:
• Insensitive rocket motor-propellant
• Insensitive warhead filling
• Propellant for the Australian Army’s ammunition, from 5.56mm
to 105mm Howitzer and 5”/54 Naval artillery.
44
Powder Application Type
Trail Boss (New) Rifle / Pistol
AP50N Pistol
AS50N Shotgun
AP100 Pistol
AR2207 Rifle
AR2219 Rifle
AR2206H Rifle
AR2208 Rifle
AR2209 Rifle
AR2213SC Rifle
AR2217 Rifle
AR2225 Rifle
AR2218 Rifle
5
SHOTGUN POWDERS
In approximate order of burning rate from fastest to slowest.
AS30N
A versatile fast burning rate, low bulk density shotgun and handgun powder. It
can be loaded over a broad range of handgun cartridges giving superb accuracy,
weapon function and clean burning. As a shotgun powder it can be loaded into
24 gram to 28 gram loads in 12 gauge with consistency and the cleanest burning
characteristics gained.
AS50N
An effective intermediate bulk density, fast/medium burning rate shotgun powder
very suitable for 28 gram loads up to 1350 ft/sec in 12 gauge.
6
SHOTGUN POWDERS
In approximate order of burning rate from fastest to slowest.
AP70N
A versatile medium burning rate handgun powder and an effective slow/medium
burning rate shotgun powder. It can be loaded over a broad range of handgun
cartridges, from .32 to .45 calibre. As a shotgun powder it can be loaded into 32
gram to 36 gram loads in 12 gauge as well as loads in 20 and 28 gauges.
7
PISTOL POWDERS
In approximate order of burning rate from fastest to slowest.
AS30N
A versatile fast burning rate, low bulk density shotgun and handgun powder. It
can be loaded over a broad range of handgun cartridges giving superb accuracy,
weapon function and clean burning. As a shotgun powder it can be loaded into
24 gram to 28 gram loads in 12 gauge with consistency and the cleanest burning
characteristics gained.
TYPICAL LOAD: .38 Special (4” vented barrel) with 148 grain cast lead projectile
CHARGE WEIGHT 2.5 grains
VELOCITY 836 ft/sec
150g NET
AP50N
An effective intermediate bulk density medium/fast burning rate handgun powder
very suitable for medium target loads in .38 special. It has proven its usefulness
in equipment such as ‘Ammo’ Load for the automated reloading of ammunition for
police and paramilitary applications in this calibre. Its burning rate, bulk density and
clean burning properties are similar to those of AS50N shotgun powder but it has
superior metering characteristics for small charge weights.
TYPICAL LOAD: .38 Special (4” vented barrel) with 158 grain lead SWC projectile
CHARGE WEIGHT 3.6 grains
VELOCITY 745 ft/sec
8
PISTOL POWDERS
In approximate order of burning rate from fastest to slowest.
AP70N
A versatile medium burning rate handgun powder and an effective slow/medium
burning rate shotgun powder. It can be loaded over a broad range of handgun
cartridges, from .32 to .45 calibre. As a shotgun powder it can be loaded into 32
gram to 36 gram loads in 12 gauge as well as loads in 20 and 28 gauges.
TYPICAL LOAD: .44 Remington Magnum (8” barrel) with 240 grain cast lead
projectile
CHARGE WEIGHT 10 grains
VELOCITY 1,225 ft/sec
AP100
An effective single base slow burning rate handgun powder suitable for major
power factor loads in .38 super and similar cartridges. It shares the same clean
burning and superior metering characteristics with the other ADI handgun powders.
TYPICAL LOAD: .38 Super Auto (4” barrel) with 135 grain cast lead projectile
CHARGE WEIGHT 7.5 grains
VELOCITY 1,325 ft/sec
AR2205
A very fine grained, very fast burning rifle powder suited to .22 Hornet loads but
also useful in some Magnum pistol loads. Its burning rate is close to that of IMR
4227.
TYPICAL LOAD: .357 Magnum (10” barrel) with 150 grain jacketed projectile
CHARGE WEIGHT 16.5 grains
VELOCITY 1,583 ft/sec
9
RIFLE POWDERS
In approximate order of burning rate from fastest to slowest.
150g NET
TYPICAL LOAD: 45-70 Government with 385 grain cast lead projectile
CHARGE WEIGHT 16.0 grains
VELOCITY 1,140 ft/sec
AR2205
A very fine grained, very fast burning rifle powder suited to .22 Hornet loads but
also useful in some Magnum pistol loads. Its burning rate is close to that of IMR
4227.
AR2207
A very useful fine grained fast burning rifle powder for cartridges such as the .222
Remington and 7.62mm x 39 Russian. Its burning rate is close to that of IMR 4198
although it meters significantly better through standard powder loaders.
10
RIFLE POWDERS
In approximate order of burning rate from fastest to slowest.
Bench Mark 1
A very fine grained powder with very high bulk density and superior metering
characteristics for use by bench rest shooters in cartridges such as .22 PPC. It is
intermediate in burning rate between AR2207 and AR2206.
AR2219
Originally developed for the Australian Defence Force 5.56mm its burning rate lies
between Bench Mark 1 and Bench Mark 2. It is considered having good accuracy
in small and medium capacity cartridges.
Bench Mark 2
A fine grained powder with very high bulk density and superior metering
characteristics for use in national rifle association match loads such as 223
Remington with 68-69 grain projectiles. It is similar in burning rate to AR2206, but
can be faster depending on the calibre used.
AR2206 Discontinued
A very versatile medium burning rifle powder suitable for use in .308 Winchester.
Originally developed for the Australian Defence Forces 7.62mm. It can also be
used in a wide range of other cartridges.
11
RIFLE POWDERS
In approximate order of burning rate from fastest to slowest.
AR2206H
Has a burning rate slightly slower than AR2206, but faster than AR2208. A very
versatile powder in a range of calibres giving outstanding accuracy.
AR2208
A useful fine grained medium/slow burning rifle powder for medium sized
cartridges such as .308 Winchester and 25-06. Its burning rate is close to that of
IMR 4064 but its bulk density is higher.
AR2209
A useful fine grained, moderately slow burning rifle powder for cartridges such as
22-250, .243 Winchester, .270 Winchester, 30-06 and 300 Winchester Magnum. Its
burning rate is close to that of IMR 4350 but its bulk density is a little higher and its
metering through a powder loader is better.
AR2213SC
A slow burning rate rifle powder for cartridges such as .270 Winchester and 300
Winchester Magnum. AR2213SC replaced AR2213 in the Australian reloading
market.
TYPICAL LOAD: 300 Winchester Magnum with 165 grain jacketed projectile
CHARGE WEIGHT 75.5 grains
VELOCITY 3,055 ft/sec
12
RIFLE POWDERS
In approximate order of burning rate from fastest to slowest.
AR2217
A fine grained, very slow burning rifle powder, suited for use in most large calibre
magnums.
TYPICAL LOAD: 7mm Remington Magnum with 150 grain jacketed projectile
CHARGE WEIGHT 68 grains
VELOCITY 2,936 ft/sec
AR2225
A very slow burning rate propellant optimised for the 300 Remington Ultra
Magnum. It is also suitable for large capacity magnum cases and small overbore
cartridges.
TYPICAL LOAD: 300 Remington Ultra Magnum with 180 grain jacketed projectile
CHARGE WEIGHT 100.5 grains
VELOCITY 3,300 ft/sec
AR2218
An extremely slow burning rifle propellant, initially developed for the Australian
Defence Force 0.50 cal and is perfect for over-bore, large capacity magnums.
13
RIFLE CASES
14
SHOOT WITH THE BEST!
Take quality to the next level when you reload with
ADI Powders and Cartridge Components
COMING SOON
.223 CALIBRE AND
.50 CALIBRE CASES
www.adi-powders.com.au
15
RELOADING SAFETY
ADI POWDERS
1. These instructions on Reloading Safety should 12. Recheck each operation for safety and
be read in conjunction with the Warnings section. uniformity.
2. Take care at all times - items and equipment 13. Double check critical points like powder type,
used for reloading can all be dangerous if projectile weight and diameter before starting.
mishandled or abused.
14. Only have one powder type and one projectile
3. Keep reloading components out of the reach of type in the actual working area while reloading.
children - in particular powder, primers and lead
projectiles. 15. Do not trim cases below the minimum design
length for any calibre.
4. Keep powder away from other combustible
material and from possible sources of ignition. 16. Ensure that cases are not deformed and are free
of body splits, mouth cracks, enlarged primer
5. Do not keep old powders, salvaged powders or pockets, enlarged flash holes and any foreign
powders of uncertain origins. matter. Only use cases which are dry (but do not
dry cases by direct heating or in an oven above
6. Do not smoke in areas where powder is stored 150° C).
or while handling powder or primers.
17. Check projectiles for damage and ensure that
7. Only store powder in its original container to lead projectiles are free from casting defects.
avoid the risk of the powder being mislabelled.
18. Always wear safety glasses or goggles while
8. Do not leave any powder or primers in reloading reloading and wear gloves while handling lead
presses or in powder/primer dispensers after projectiles.
handloading is completed.
19. Owing to the effect of variations within allowable
9. Clean up spilled powder promptly. Use a brush manufacturing tolerances for cartridge
and dustpan. Do not use a vacuum cleaner. components made by different manufacturers,
Keep the waste powder under water in a suitable weapon variations and conditions, operating
container until it can be disposed of safely. Do temperatures etc, pressures developed by any
not accumulate large amounts of waste powder. given rifle or pistol load can vary significantly
from those that apply to our recommended
10. Each ADI Powder has specific burning rate loads. It is therefore essential that loads be
and bulking characteristics determined by its worked up from a charge weight lower than the
composition, geometry and manufacturing recommended maximum, watching for any signs
process. The factors are carefully controlled of excessive pressure (difficult extraction, gas
during manufacture to ensure consistent ballistic leaks, flattened or blown primers, unusual recoil
performance. Do not attempt to mix or blend or expanded case heads). Loads can then be
different powders as such mixtures may produce worked up to safe comfortable levels providing
dangerous and erratic velocities and pressures. signs of excessive pressure are not observed.
If signs of excessive pressure are noticed then
11. Develop a strict routine for reloading operations loads must be reduced until they are at least
and avoid distraction such as television, visitors 5% lower than the load at which the excessive
etc. pressure signs were first noted.
16
RELOADING SAFETY
ADI POWDERS
20. Take special care when working up trial loads dangerous pressures are certain to occur. After
with slow burning powders in large calibre bullet seating, the cartridge overall length must
cartridges. Light loads in some calibres may be individually checked to ensure that it has
produce occasional dangerously high pressures. not fallen below the minimum design value
It is suggested that minimum loads in large where excessive dangerous pressures may be
calibre cartridges should not be reduced below experienced.
about 75% case capacity.
25. Ensure that all reloaded cartridges are free from
21. Keep detailed records of your safe loads for your oil, grease, excess lead bullet lubricant and any
weapons and consult them before reloading. other foreign matter prior to firing.
However, be prepared to work them up again
whenever you change the lot of powder or alter 26. Never attempt to decap live primers from a
the weapon. Normally a starting reduction of 5% cartridge case. Primed cases or cartridges
in charge weight is all that should be necessary should always be fired in a firearm to destroy
when you change lots of powder. the primer. NOTE: Whenever practicable,
avoid loading to maximum possible velocity.
22. Never exceed maximum recommended loads. Experienced shooters know that velocities which
are somewhat slower than maximum will usually
23. Carry out frequent check weighing of powder give the best accuracy while helping to prolong
charges thrown either by a hand operated weapon and barrel life and making shooting
powder measure or reloading press to ensure more comfortable.
the setting has not changed. At least five
charges should be used for each check using a 27. Any questions or concerns related to the use of
good set of powder scales. ADI Powders should be directed to:
24. Because many recommended loads (especially Thales Australia Limited, Mulwala NSW at
for pistols) do not fill the cartridge case it is reload.support@adi-powders.com.au
essential that, prior to bullet seating, each filled
case is individually inspected to ensure that
it contains only a single charge. Never load a
cartridge with a double charge as excessively
17
WARNING
ADI POWDERS
1. For the safety of the purchaser and others, ADI result in damage and/or personal injury or even
powders must be used in accordance with the death.
latest edition of the ADI Powders Handloaders’
Guide. Overloading, incorrect storage or 3. While Thales controls the burning rate of its
improper use can result in personal injury or various powders within tight limits at the time
death to the user and/or other persons as well of manufacture, all other factors affecting the
as damage to property. It is essential that users ballistic performance of these powders at the
of ADI powders: time of use are outside Thales's control. Thales
therefore disclaims any and all warranties
• Follow the recommendations of the ADI concerning the use of its various powders for
Powders Handloaders’ Guide by not any particular application. Thales does not
exceeding the maximum loads. assume, nor does it authorise any person to
• Use only the latest reloading data. assume for it, any liability in connection with the
• Keep the powders out of reach of children and use of any product or data.
those persons unfamiliar with the properties of
powders. 4. The buyer of ADI Powders assumes the risk of
having to follow safe loading practices otherwise
• Store the powders in a cool, dry and safe damage and/or severe personal injury (including
place with the lid tightly closed. death) may occur.
• Check the powders at least once per year for
any signs of deterioration as described below. 5. NEVER substitute ADI Powders for black powder
• Store all powders in the original containers. or Pyrodex® and NEVER mix ADI powders
with these materials. NEVER use ADI powders
• Do not smoke in areas where ADI powders in black powder firearms, saluting cannons or
are stored and used. similar devices. Any of these practices may
• Do not have loaded firearms in areas where result in the firearm blowing apart resulting in
ADI powders are stored and used. property damage, personal injury or even death.
2. Loading data provided within the ADI Powders
Handloaders’ Guide has been compiled from
many sources including actual ballistic testing
by Thales under controlled conditions and
published loading/ballistic information available
in the literature. The ballistic performance of
powders varies considerably depending upon
factors such as the type of firearm being used
and its condition, the particular components
being used in a cartridge with a powder, the
reloading techniques used, the actual batch of
the powder being loaded, weather conditions
at the time of firing, etc. Therefore, it is not
possible for the loading data in the ADI Powders
Handloaders’ Guide (or any other similar
manual) to be other than a guide to a safe load
for any particular application. Exceeding the
recommended loading data will increase the
chance of obtaining unsafe pressures and may
18
WARNING
ADI POWDERS
6. Store powders in a cool dry place separate 8. Deteriorated smokeless powder should be
from solvents, flammable gases and other disposed of by carefully burning it in thin layers
combustible materials. Ensure that the storage (not more than 10mm deep) in small quantities
area selected is free from any possible source (never more than 500 gram) in an isolated
of excess heat and is isolated from open flame, location (at least 10 metres from any other
hot water heaters, furnaces, chimneys, flue combustible material). DO NOT LIGHT THE
pipes, etc. Avoid storing powders in areas POWDER DIRECTLY. Always use an ignition
which may be heated by the sun or where train of slow burning combustible material so that
electrical, electronic or mechanical equipment is you are able to retreat to a safe distance before
operated. Do not allow containers of powder to the powder ignites.
contact walls of storage areas that are exposed
on the other side to sunlight or other form of 9. Store ADI Powders in their original containers,
heating. Any such form of heating or ignition which have been approved for that purpose.
may result in a fire, either immediately or after Storage cabinets used for storage of containers
some time due to accelerated chemical of powders should be constructed of insulating
deterioration and subsequent spontaneous materials with weak walls, seams or joints to
ignition. An average storage temperature below provide easy venting in the event of a fire. Such
25° C is recommended to obtain a safe shelf life storage cabinets should not be located on walls
of at least 10 years from the date of packing. where heating on the other side (by the sun or
Increased storage temperature will reduce the other heating arrangement) will occur.
safe shelf life significantly—by approximately
one-third for every 10° C above 25° C. 10. DO NOT SMOKE in areas where smokeless
powder is stored or used.
7. All powders deteriorate chemically as they
get older. This rate of deterioration can be 11. DO NOT HAVE LOADED FIREARMS in areas
accelerated by storage in warm conditions, where ADI Powders are stored or used—
exposure to other chemicals and exposure to accidental or intended operation of the firearm
direct sunlight etc. Any such deterioration may may cause ignition of smokeless powder, either
ultimately lead to a fire through spontaneous by direct ignition of powder in the open or
ignition of the powder. CHECK containers through bullet impact on containers of powders.
of smokeless powder for possible chemical
deterioration through age or inadequate storage. 12. Do not cut, pierce or puncture powder
Yearly checks are recommended. Chemical containers.
deterioration may ultimately lead to spontaneous
13. ADI rifle powders are designed to give less
ignition of the powder. Chemical deterioration
ballistic variation with temperature changes
of smokeless powder can be recognised by
than regular powders. This does not mean that
carefully smelling the contents of the container.
ballistics will never change with temperature. The
Any deterioration produces an acrid, acidic
extent to which change is minimised depends
odour quite different from the normal sweet
upon many factors including the calibre, primer
smelling odours of ethanol or ether that are
brand and projectile weight. Care should always
usually present. Rusting of metal surfaces
be taken to ensure that any particular load is
exposed to smokeless powder can also indicate
safe at the extreme temperatures at which it will
deterioration.
be used.
19
WARNING
ADI POWDERS
14. Powders can change their moisture 16. Never mix any varieties of powder,
reasonably quickly if exposed to the regardless of their type, brand or source.
atmosphere. Any change of moisture
can affect the powder burning rate and 17. Do not salvage powder from old cartridges,
the effectiveness or safety of a particular and do not mix new and salvaged powder.
load. Always minimise the exposure of
any smokeless powder to the atmosphere 18. Always store powder in the smallest
during loading. Use minimum quantities of practical quantities. If you have large
powder at any time in powder loaders and quantities of powder, do not maintain it all
keep lids on containers tightly closed at in one place only. Spread your containers,
all times. Do not keep powders in loaders and remember that small containers are
for long periods of time. In this way you safer than large containers.
are more likely to preserve the appropriate
level of moisture for the lot of the powder in
use and obtain consistent reliable ballistic
performances from every load.
20
S H OTGUN DATA
Loads listed here should be followed as they are printed. These loads are
for use with lead shot only, and must not be used with steel shot under any
circumstances.
SHOTGUN
DATA
21
SHOTGUN
Introduction
The shotgun data for this edition was developed through the use of pressure/proof barrels. All loads for
standard cartridges adhere to the guidelines provided by the Sporting Arms and Ammunition Manufacturers
Institute (SAAMI).
Loads have been listed in a convenient presentation that lists all components used for a given set of data.
The data shown is to be used for lead shot only and should not be used with steel or bismuth shot. Never
substitute components when loading shotshells using this data. Substitution of different components could
cause excessive or unsafe pressures, which may result in damage to your firearm and/or personal injury.
Velocity
Velocity is measured electronically with the use of two magnetic sightscreens. The screens measure the time
taken for the shot to pass through the screens. Screens are set at 3 feet apart with the first screen positioned
1½ feet from the muzzle.
Pressure
Pressures have been measured electronically with a transducer as pounds per square inch (psi). This method
utilises a pressure transducer, which rests against the cartridge in the chamber. When the cartridge is fired,
the gases cause the shotgun shell to expand against the pressure transducer.
Loading Instructions
When loading, weigh actual charges thrown by the bushing or charge bar. Bushing or charge bars do not
throw the exact powder charge as listed in the tables. Charge weight variations occur because of small
tolerances in bushing sizes, tolerances in bulk density of powder and the way each loader is mounted and
operated. It is essential that charges being dropped are verified for safety and to ensure you are obtaining the
charge weight listed.
22
SHOTGUN
12 Gauge
Shotgun 2¾” (70mm) ACTIV Plastic Cases
Weight: 24g - (7/8 oz) - Shot size 3 to 12 Lead
WEIGHT VELOCITY BARREL
POWDER (grains) PRESSURE (fps) WAD TYPE PRIMER TYPE LENGTH
AS30N 19.0 6,150 psi 1,200 Gualandi WIN209 30"
Fiocchi 616
20.0 6,600 psi 1,250 Gualandi WIN209 30"
Fiocchi 616
20.5 7,150 psi 1,300 Gualandi WIN209 30"
Fiocchi 616
21.5 7,700 psi 1,350 Gualandi WIN209 30"
Fiocchi 616
22.5 8,250 psi 1,400 Gualandi WIN209 30"
Fiocchi 616
23
SHOTGUN
WEIGHT VELOCITY BARREL
POWDER (grains) PRESSURE (fps) WAD TYPE PRIMER TYPE LENGTH
Weight 32g - (1 1/8 oz) - Shot size 3 to 12 Lead (cont.)
AP70N 26.0 8,800 psi 1,250 Gualandi WIN209 30"
Fiocchi 616
27.0 9,850 psi 1,300 Gualandi WIN209 30"
Fiocchi 616
24
SHOTGUN
25
SHOTGUN
26
SHOTGUN
WEIGHT VELOCITY BARREL
POWDER (grains) PRESSURE (fps) WAD TYPE PRIMER TYPE LENGTH
Weight SG/00 - 9 Lead Balls (cont.)
AP70N (cont.) 27.6 8,150 psi 1,350 WAA12F114 WIN209 30"
28.5 9,115 psi 1,400 B&P H.21 Fiocchi 616 30"
28.5 8,988 psi 1,400 WAA12F114 WIN209 30"
27
SHOTGUN
28
SHOTGUN
WEIGHT VELOCITY BARREL
POWDER (grains) PRESSURE (fps) WAD TYPE PRIMER TYPE LENGTH
Weight 32g - (1 1/8 oz) - Shot size 3 to 12 Lead (cont.)
AS50N 19.0 9,000 psi 1,145 WAA12 WIN209 30"
CCI209
Fiocchi 616
19.5 9,850 psi 1,200 WAA12 WIN209 30"
CCI209
Fiocchi 616
AP70N 23.0 9,750 psi 1,200 WAA12 WIN209 30"
CCI209
Fiocchi 616
23.5 10,100 psi 1,250 WAA12 WIN209 30"
CCI209
Fiocchi 616
24.5 11,200 psi 1,300 WAA12 WIN209 30"
CCI209
Fiocchi 616
29
SHOTGUN
16 Gauge 2¾” (70mm) Winchester AA Plastic Compression-Formed Cases
Weight: 28g - (1 oz) - Shot size 3 to 12 Lead
WEIGHT VELOCITY BARREL
POWDER (grains) PRESSURE (fps) WAD TYPE PRIMER TYPE LENGTH
AP70N 19.0 9,200 psi 1,165 WAA16 WIN209 30"
20.0 10,300 psi 1,220 WAA16 WIN209 30"
20.7 11,000 psi 1,220 WAA16 WIN209 30"
30
SHOTGUN
20 Gauge 3” (75mm) Remington Premier Plastic Cases
Weight: 32g - (1 1/8 oz) - Shot size 3 to 12 Lead
WEIGHT VELOCITY BARREL
POWDER (grains) PRESSURE (fps) WAD TYPE PRIMER TYPE LENGTH
AP70N 17 10,070 psi 1,075 Rem. SP 20 WIN209 30"
18 11,990 psi 1,135 Rem. SP 20 WIN209 30"
31
SHOTGUN POWDER BUSHING CHART AS30N
Shotgun Powder
Bushing
AS30N Chart Charts
g
Bushin
n
Shotgu PACIFIC TEXAN
D, DP
N E SS
5APF
DY
A, AP, T
G
,L
EN
IN
A
GT, FW
LYMAN
6
5
6
CHARGE WEIGHT
WARR
HORN
BLAIR
PONS
REDD
DL-15
DL-15
DL-36
DL-10
DL-26
MEC
LEE
(grains)
M
16.0 .141 H 29 429
16.5 .148 F1 12 414 420 420 124 126
.155 I 429 30 H10 13
17.0 .163 J 31 125 127 441
17.5 J1 441 H11 423 432 432 128
18.0 J2 32 14 127 129 456
18.5 .171 G 450 432 441 441 128
G1 33 130
19.0 .180 H11A 444 450 450 129 131 468
459 34 H12
19.5 M 465 130 132
20.0 .189 35 453 459 462 131 483
20.5 N 36 H13 15 132
21.0 O 37 495
21.5 P
22.0 .198 Q 38 507
22.5 38A
23.0
23.5
NOTE: This bushing chart does not represent recommended charge weights. It is intended only as a guide to the
approximate weight of powder that will be dropped by the listed bushing. It is essential that charges being dropped are
weighed on each occasion a loading machine is used.
32
SHOTGUN POWDER BUSHING CHART AS50N
Shotgun Powder
Bushing
AS50N Chart PACIFIC TEXAN
D, DP
N ES S
A PF
AD Y
A, AP, T
ING
,L
EN
GT, FW
LYMAN
6
DL-155
5
6
WARR
CHARGE WEIGHT
HORN
BLAIR
PO N S
R ED D
DL-15
DL-36
DL-10
DL-26
M EC
LEE
(grains)
M
13.7 .105 21
14.0 375
14.3 22 378
14.6 381
384
14.9 23 387
390
15.2 .116 D 393
15.5 D1 24 396
16.0 .122 E 25 402
16.5 .128 E1 26 408
27 414
17.0 E2
17.5 .134 F1 28 420
18.0 29 423
18.5 .141 H 12 124 429
19.0 I 429 30 H10 13 414 420 420 125 126 435
19.5 .148 J 31 127 441
20.0 J1 441 H11 423 423 432 126 128 447
20.5 .155 K 450 32 14 127 453
432 441 441 129
21.0 33 128 130 459
21.5 .163 L H11A 129 465
459 H12 444 450 450 131
22.0 34 130 471
22.5 .171 M 465 132 477
23.0 35 453 459 462 131 133 483
23.5 .180 N 36 15 462 479 474 132 489
24.0 O H13 495
24.5 .189 P 37 501
25.0 Q 38 507
25.5
26.0 .198 38A
NOTE: This bushing chart does not represent recommended charge weights. It is intended only as a guide to the
approximate weight of powder that will be dropped by the listed bushing. It is essential that charges being dropped are
weighed on each occasion a loading machine is used.
33
SHOTGUN POWDER BUSHING CHART AP70N
Shotgun Powder
Bushing
AP70N Chart PACIFIC TEXAN
D, DP
N ES S
5APF
AD Y
A, AP, T
ING
,L
EN
GT, FW
LYMAN
DL-155
6
5
6
CHARGE WEIGHT
WARR
HORN
BLAIR
PO N S
R ED D
DL-36
DL-15
DL-10
DL-26
M EC
L EE
(grains)
M
12.7 C 112
13.0 C 16 330
13.5 17 113
13.6 111
14.0 D1 18 112 114 342
14.5 19 115
15.0 .095 116 354
15.5 E 20 113 117
16.0 21 114 366
E1 22 115
16.5 116 118 372
.105
17.0 E2 22 119 378
D 117
17.4 23 384
.110 D1 118 120
18.0 F 121 390
18.5 .116 F1 24 393
19.0 F6 25 119 122 402
19.4 .122 26 120 123 405
20.0 .123 G 27 121 124 411
20.6 G1 122 417
21.0 .134 28 123 420
21.5 423 420 420 126 423
22.0 H 29 12 124 127 429
22.5 .141 30 H10 432 432 432 128 432
23.0 I 429 13 125 438
23.5 .148 31 H11 126 441
14 127
24.0 .151 J 441 447 447 447 129 447
24.5 .155 J1 32 130 450
25.0 K 456 456 456 128 131 456
.163 L 450 33 129
26.0 459 34 468 468 468 132 468
35 130 133
27.0 .171 M 465 480 480 480 131 480
28.0 N 36 15 132 489
29.0 O 37 H13 133 501
NOTE: This bushing chart does not represent recommended charge weights. It is intended only as a
guide to the approximate weight of powder that will be dropped by the listed bushing. It is essential that
34 charges being dropped are weighed on each occasion a loading machine is used.
P I S TOL DATA
This section shows the maximum load for every configuration of pistol, bullet
weight and powder type. It also shows the recommended starting load for some
configurations. Pressure variations, due to different components; weapons;
weapon conditions and powder lots, are relatively greater for pistols than for rifles.
Therefore, for your first load, use the starting load; if no starting load is shown, it
is essential that you use 20% less than the maximum load.
To work up to your safe load, increase the starting load by no more than 2% at a
time.
The pistol loads shown are for jacketed projectiles unless otherwise specified.
PISTOL
DATA
35
PISTOL
Introduction
The pistol data for this edition was developed through the use of pressure/proof barrels. All loads for
standard cartridges adhere to the guidelines provided by the Sporting Arms and Ammunition Manufacturers
Institute (SAAMI). For data on obsolete or less popular cartridges where a pressure/proof barrel was not
available, maximum loads were obtained by firings in actual firearms while noting visual case head signs
such as flat or cratered primers, difficult extraction and measured case heads.
Velocity
Velocities for all cartridges listed are limited by the SAAMI maximum allowable pressures. Minimum loads
are also established by pressure, since loads with very low pressure may fail to function in very cold
weather, resulting in a projectile becoming lodged in the bore (please see the Warnings section of this
guide).
The average loss in velocity from the listed pressure/proof barrel data when using a 45⁄8 inch barrelled
revolver is 175 fps. A 71⁄2 inch revolver will lose approximately 50 fps.
Velocity is measured electronically with the use of two infrared sightscreens. The screens measure the time
taken for the projectile to pass through the screens. Screens are set at 20 feet apart with the first screen
positioned 5 feet from the muzzle.
Pressure
Pressures are listed in either copper units of pressure (cup) or pounds per square inch (psi). Copper units
of pressure (cup) is determined mechanically using a copper slug called a “crusher”. The crusher is placed
in a fixture over the chamber where a hole passes through the barrel to the chamber. When the cartridge is
fired, the resulting gases cause the “crusher” to flatten. The “crusher” is then measured and the result is then
converted to pressure in by comparing to a tarage table.
Pressure data listed listed in psi was measured electronically with the use of a pressure transducer. The
pressure transducer rests against the cartridge when loaded in the chamber. When the cartridge is fired, the
gases cause the brass to expand against the pressure transducer.
Loading Instructions
When working up a load, the reloader should always begin with the starting load, advance in small
increments, watch for pressure signs and begin again if changing components. Generally, the best powder
choice is the powder that most fills the case for the intended velocity while still remaining clean burning.
Most cartridges have only a certain number of appropriate powders. Those cartridges that are more versatile
can use a wider range of propellant burning rates. For others, lesser numbers of propellants will give
optimum results.
Most often, slower burning powders are more suitable with heavy bullets, while faster powders are better
with lighter projectiles. Most reloaders like a powder that delivers near maximum or maximum results
throughout the range of projectiles, but that is not always obtainable, since some cartridges have too wide a
range of bullets for any one burning rate to be ideal.
The handloader that seriously loads for any given cartridge will choose different components (primer,
powders, projectiles, cases) in varying combinations to obtain the best overall performance and accuracy.
The handloader reloads to save money, but also reloads to improve accuracy and performance, creating
special loads that cannot be found on the dealers’ shelves.
36
PISTOL
Pistol STARTING LOADS MAXIMUM LOADS
BULLET
POWDER POWDER POWDER
CALIBRE WEIGHT VELOCITY VELOCITY
TYPE WEIGHT PRESSURE WEIGHT PRESSURE
(grains) (fps) (fps)
(Grains) (grains)
.17 Bumble Bee 10" Barrel
25 AR2205 6.0 2,035 - 7.0 2,330 -
.22 Hornet (TCU) 15" Barrel
35 AR2205 10.5 2,580 35,600 cup 11.6C 2,770 42,500 cup
40 AR2205 9.0 2,405 39,900 cup 10.2 2,460 43,000 cup
45 AR2207 10.5 2,000 28,000 cup 11.5C 2,200 32,000 cup
45 AR2205 8.5 2,200 39,900 cup 9.8 2,350 42,000 cup
50 AR2205 8.4 2,120 39,700 cup 9.4 2,270 41,800 cup
50 AR2207 10.5 2,005 28,200 cup 11.5C 2,205 34,100 cup
53 AR2205 8.0 1,945 37,600 cup 8.7 2,070 43,000 cup
53 AR2207 10.0 1,860 31,600 cup 11.0 2,100 40,600 cup
55 AR2205 8.0 1,990 41,800 cup 9.0 2,150 43,000 cup
55 AR2207 10.0 1,845 30,000 cup 11.5 2,180 41,000 cup
.22 Remington Jet (TCU) 10" Barrel (except where noted)
40 AP100 - - - 8.0 1,800 -
Note: 8 3/8" Barrel 40 AR2205 - - - 13.5 2,290 32,900 cup
45 AP100 - - - 7.5 1,700 -
45 AR2205 - - - 12.5 2,300 -
.221 Remington Fireball 10 3/4" Barrel
40 AR2205 15.5 2,925 - 17.0 3,035 -
45 AR2205 15.0 2,590 - 16.0 2,700 -
45 AR2207 16.0 2,450 - 17.0 2,630 -
50 AR2205 15.0 2,580 - 16.0 2,670 -
50 AR2207 15.5 2,410 - 16.5 2,540 -
53 AR2205 15.0 2,450 - 16.0 2,605 -
53 AR2207 15.5 2,345 - 16.5 2,540 -
55 AR2205 14.5 2,420 - 15.5 2,505 -
55 AR2207 15.0 2,260 - 16.0 2,440 -
60 AR2205 14.0 2,330 - 15.0 2,415 -
60 AR2207 15.0 2,250 - 16.0 2,400 -
.222 Remington (TCU) 10" Barrel
45 AR2207 - - - 20.5 2,575 -
50 AR2207 - - - 20.0 2,525 -
52 AR2207 - - - 19.6 2,425 -
55 AR2207 - - - 19.2 2,325 -
.223 Remington 15" Barrel
40 AR2207 20.5 2,755 29,400 cup 22.5 3,015 49,600 cup
40 AR2219 23.5 2,785 34,600 cup 25.5 3,085 48,000 cup
40 Bench Mark 2 25.3 2,900 39,600 cup 27.3 3,175 51,000 cup
40 AR2206H 25.0 2,630 32,100 cup 27.5C 3,060 44,500 cup
62
R I F LE DATA
This section shows the maximum load for every configuration of rifle, bullet
weight and powder type. It also shows the recommended starting load for
some configurations. For your first load, use the starting load; if no starting
load is shown, use 10% less than the maximum load. To work up to your
safe load, increase the load by no more than 3% at a time.
The rifle loads shown are for jacketed projectiles unless otherwise specified.
RIFLE
DATA
63
RIFLE
Introduction
The rifle data for this edition was developed through the use of pressure/proof barrels. All loads for standard
cartridges adhere to the guidelines provided by the Sporting Arms and Ammunition Manufacturers Institute
(SAAMI). For data on obsolete or less popular cartridges where a pressure/proof barrel was not available,
maximum loads were obtained by firings in actual firearms while noting visual case head signs such as flat
or cratered primers, difficult extraction and measured case heads.
Velocity
Velocity is measured electronically with the use of two infrared sightscreens. The screens measure the time
taken for the projectile to pass through the screens. Screens are set at 20 feet apart with the first screen
positioned 5 feet from the muzzle. Velocities for all cartridges listed are limited by the SAAMI maximum
allowable pressures. The average change in velocity from the listed pressure barrel data is approximately 35
to 50 fps for each inch of barrel length.
Pressure
Where listed, pressures are in pounds per square inch (psi). If no pressure is listed then the pressure was
measured mechanically with copper units of pressure (cup). These pressures have not been listed to avoid
confusion between the two pressure units.
Pressure data listed in psi was measured electronically with the use of a pressure transducer. The pressure
transducer rests against the cartridge when loaded into the chamber. When the cartridge is fired, the gases
cause the brass to expand against the pressure transducer and the results are measured.
Loading Instructions
When working up a load, the reloader should always begin with the starting load, advance in small
increments, watch for pressure signs and begin again if changing components. Generally, the best powder
choice is the powder that most nearly fills the case for the intended velocity. Most cartridges have only a
certain number of appropriate powders. Those cartridges that are more versatile can use a wider range of
propellant burning rates. For others, lesser numbers of propellants will give optimum results.
Most often, slower burning powders are more suitable with heavy bullets, while faster powders are better
with lighter projectiles. Most reloaders like a powder that delivers near maximum or maximum results
throughout the range of projectiles, but that is not always obtainable, since some cartridges (like the 30-06)
have too wide a range of projectiles for any one burning rate to be ideal.
The handloader that seriously loads for any given cartridge will choose different components (primer,
powders, projectiles, cases) in varying combinations to obtain the best overall performance and accuracy.
The handloader reloads to save money, but also reloads to improve accuracy and performance, creating
special loads that cannot be found on the dealers’ shelves.
64
RIFLE
Rifle STARTING LOADS MAXIMUM LOADS
BULLET
POWDER POWDER POWDER
CALIBRE WEIGHT VELOCITY VELOCITY
TYPE WEIGHT PRESSURE WEIGHT PRESSURE
(grains) (fps) (fps)
(Grains) (grains)
17 Hornet (Ackley) 24" Barrel
20 AR2205 8.5 3,080 - 9.2 3,240 -
20 AR2207 11.5 3,245 - 12.5C 3,515 -
25 AR2207 10.9 3,015 - 11.6 3,175 -
25 AR2219 12.0 2,895 - 13.0C 3,155 -
30 AR2207 10.0 2,710 - 10.7 2,925 -
30 AR2219 11.5 2,745 - 12.2 2,985 -
30 Bench Mark 2 12.2 2,900 - 13.0C 2,975 -
17 Bee (Ackley) 22" Barrel
25 AR2205 10.0 2,910 - 11.0 3,130 -
25 AR2207 12.5 2,975 - 13.5 3,365 -
17 Mach IV 24" Barrel
25 AR2207 15.0 3,240 - 16.0 3,575 -
25 AR2206 16.5 3,300 - 18.5 3,700 -
17 Remington Fireball 24" Barrel
20 AR2207 16.0 3,810 - 17.3 4,040 -
20 AR2219 18.0 3,650 - 19.5C 4,020 -
20 Bench Mark 2 18.5 3,760 - 20.0C 4,015 -
25 AR2207 15.4 3,550 - 17.0 3,790 -
25 AR2219 17.0 3,505 - 18.3 3,705 -
25 Bench Mark 2 17.5 3,550 - 19.0 3,745 -
30 AR2207 14.9 3,300 - 15.9 3,480 -
30 AR2219 16.5 3,295 - 18.0 3,535 -
30 Bench Mark 2 17.0 3,305 - 18.7C 3,570 -
17 - 222 22" Barrel
25 AR2207 16.2 3,450 - 17.2 3,600 -
25 AR2206 19.0 3,415 - 20.0 3,625 -
25 AR2206H 19.5 3,440 - 20.5 3,645 -
25 AR2208 19.5 3,400 - 21.0 3,600 -
17 Remington 24" Barrel
20 AR2219 21.0 3,965 - 23.2 4,290 -
20 Bench Mark 2 22.0 3,985 - 24.5 4,340 -
20 AR2206H 23.0 4,035 - 25.5C 4,435 -
20 AR2208 23.5 3,935 - 25.5C 4,210 -
25 AR2207 16.5 3,480 - 18.5 3,900 -
25 Bench Mark 1 18.5 3,580 - 20.5 3,965 -
25 AR2219 19.5 3,655 - 21.8 3,920 -
25 Bench Mark 2 21.5 3,790 - 23.3 4,040 -
25 AR2206 20.0 3,635 - 22.0 4,000 -
25 AR2206H 21.0 3,760 - 23.0 4,035 -
SINGLE
ACTION
DATA
157
Single Action Data
158
SINGLE ACTION RIFLE
Single Action Rifle STARTING LOADS MAXIMUM LOADS
BULLET
POWDER POWDER POWDER
CALIBRE WEIGHT VELOCITY VELOCITY
TYPE WEIGHT PRESSURE WEIGHT PRESSURE
(grains) (fps) (fps)
(Grains) (grains)
30-30 Winchester 24" Barrel
160 Cast Trail Boss 6.5 995 20,500 cup 9.0 1,195 29,100 cup
160 Cast AR2207 15.0 1,420 15,000 cup 17.0 1,616 20,600 cup
160 Cast AR2206H 17.5 1,351 15,200 cup 21.0 1,562 23,100 cup
32-40 Winchester 24" Barrel
196 Cast Trail Boss 5.0 835 12,500 cup 6.0 935 25,300 cup
196 Cast AR2205 12.6 1,200 - 13.0 1,367 18,000 cup
38-55 Winchester 24" Barrel
250 Cast Trail Boss 6.0 840 20,300 cup 7.0 910 25,600 cup
250 Cast AR2207 18.5 1,410 17,100 cup 24.0 1,740 26,200 cup
250 Cast AR2219 24.0 1,535 22,500 cup 27.0 1,690 27,600 cup
250 Cast AR2206H 21.0 1,197 18,200 cup 26.0 1,600 26,500 cup
40-65 Winchester 24" Barrel
400 Lead Trail Boss 11.0 890 20,000 cup 12.0 915 21,200 cup
400 Lead AR2205 20.0 1,275 18,900 cup 23.0 1,410 24,900 cup
400 Lead AR2207 28.0 1,440 21,200 cup 31.0 1,570 24,700 cup
400 Lead AR2219 30.5 1,400 19,200 cup 33.0 1,520 23,900 cup
400 Lead Bench Mark 2 29.0 1,320 18,800 cup 32.5 1,490 25,000 cup
400 Lead AR2206H 33.0 1,425 19,700 cup 36.0 1,555 24,200 cup
400 Lead AR2208 35.0 1,440 20,100 cup 38.0 1,560 24,800 cup
45-120 Sharps 24" Barrel
350 Lead Trail Boss 29.0 1,320 20,500 cup 32.0 1,370 24,400 cup
350 Lead AR2207 46.0 1,783 22,500 cup 49.0 1,903 27,500 cup
350 Lead AR2219 50.0 1,717 21,000 cup 53.0 1,874 27,700 cup
350 Lead Bench Mark 2 53.0 1,809 24,700 cup 57.0 1,922 26,800 cup
350 Lead AR2206H 59.0 1,875 24,800 cup 64.0 2,031 26,900 cup
405 Lead Trail Boss 26.0 1,155 18,300 cup 30.0 1,250 25,500 cup
405 Lead AR2207 45.0 1,708 24,700 cup 48.0 1,818 27,200 cup
405 Lead AR2219 49.0 1,665 23,200 cup 52.5 1,793 27,900 cup
405 Lead Bench Mark 2 53.0 1,805 26,500 cup 58.0 1,917 27,200 cup
405 Lead AR2206H 58.0 1,849 26,000 cup 64.0 2,012 28,300 cup
405 Lead AR2208 59.0 1,763 24,200 cup 63.0 1,858 28,200 cup
500 Lead Trail Boss 26.0 1,050 20,100 cup 29.0 1,105 24,300 cup
500 Lead AR2207 42.0 1,523 25,200 cup 46.5 1,650 28,300 cup
500 Lead AR2219 48.0 1,568 25,400 cup 52.0 1,695 28,300 cup
500 Lead Bench Mark 2 50.0 1,607 26,600 cup 54.5 1,747 28,200 cup
500 Lead AR2206H 54.0 1,641 24,400 cup 60.0 1,809 28,500 cup
500 Lead AR2208 56.0 1,618 24,200 cup 61.0 1,737 27,900 cup
45-70 Government 24" Barrel
300 Cast Trail Boss 14.0 1,200 19,400 cup 16.5 1,285 20,900 cup
165
SINGLE ACTION SHOTGUN
WEIGHT VELOCITY
POWDER (grains) PRESSURE (fps) WAD TYPE PRIMER TYPE
Weight 32g (1 1/8 oz) (cont.)
AP70N (cont.) 24.4 9,100 psi 1,255 Windjammer CCI209
23.7 9,900 psi 1,255 Rem. Fig 8 WIN209
23.0 10,700 psi 1,255 WAA12 WIN209
25.0 10,800 psi 1,310 Rem. Fig 8 WIN209
25.7 10,200 psi 1,310 Windjammer CCI209
166
SINGLE ACTION SHOTGUN
WEIGHT VELOCITY
POWDER (grains) PRESSURE (fps) WAD TYPE PRIMER TYPE
Weight 32g (1 1/8 oz) (cont.)
AS30N (cont.) 18.4 7,800 lup 1,145 Red PC Rem. 209P
17.0 8,500 lup 1,145 Rem. Fig 8 WIN209
17.3 8,800 lup 1,145 WAA12 WIN209
18.1 9,400 lup 1,200 Rem. Fig 8 WIN209
18.2 9,800 lup 1,200 WAA12 WIN209
19.6 8,400 lup 1,200 Red PC Rem. 209P
AS50N 17.6 7,400 lup 1,090 WAA12 WIN209
18.3 6,800 lup 1,090 Red PC WIN209
18.1 8,300 lup 1,145 WAA12 WIN209
18.9 7,200 lup 1,145 Red PC WIN209
20.1 6,300 lup 1,145 Rem. Fig 8 Rem. 209P
19.2 9,600 lup 1,200 WAA12 WIN209
20.2 8,300 lup 1,200 Red PC WIN209
21.1 7,700 lup 1,200 Rem. Fig 8 Rem. 209P
21.3 10,800 lup 1,255 WAA12 WIN209
21.3 9,700 lup 1,255 Red PC WIN209
22.1 8,000 lup 1,255 Rem. Fig 8 Rem. 209P
AP70N 22.0 10,000 psi 1,200 WAA12 WIN209
22.5 9,000 psi 1,200 Rem. Fig 8 WIN209
22.7 10,600 psi 1,255 WAA12 WIN209
23.5 10,000 psi 1,255 Rem. Fig 8 WIN209
24.5 10,700 psi 1,310 Rem. Fig 8 WIN209
167
SINGLE ACTION SHOTGUN
16 Gauge 2¾” Winchester Compression-Formed Shells
Weight: 28g (1 oz)
WEIGHT VELOCITY
POWDER (grains) PRESSURE (fps) WAD TYPE PRIMER TYPE
AP70N 19.0 8,800 psi 1,165 ACTIV G-28 WIN209
19.0 9,200 psi 1,165 WAA16 WIN209
20.0 10,300 psi 1,220 WAA16 WIN209
20.3 9,700 psi 1,220 ACTIV G-28 WIN209
20.7 11,000 psi 1,275 WAA16 WIN209
21.5 10,600 psi 1,275 ACTIV G-28 WIN209
168
No data on this page
169
POWDER EQUIVALENTS
MANUFACTURERS
ADI Hodgdon Alliant IMR Winchester Vectan Norma Accurate Arms Vihtavuori ADI
R-1
Bullseye N310
AS30N Clays Red Dot AS N2010 NITRO 100 AS30N
Trail Boss Trail Boss Trail Boss
AP50N HP-38 e3 PB W231 AA 2 N320 AP50N
AS50N International Green Dot 700X WST AA 5 AS50N
AP70N Universal Unique SR 7625 N330 AP70N
Herco WSF A1
800X WAP AA 7 N340
AP100 SR 4756 AP100
HS-6 W540 3N37
HS-7 Blue Dot W571 AA 9 N350
Steel Ba 6 N105
2400 SR 4759 N110
AR2205 H4227 / H110 IMR 4227 W296 R-123 AA 1680 N120 AR2205
AR2207 H4198 Reloader 7 IMR 4198 W680 Tu 2000 N200 N130 AR2207
Bench Mark 1 N133 Bench Mark 1
AR2219 H322 10-X AR2219
Bench Mark 2 BENCHMARK IMR 3031 AA 2015 Bench Mark 2
AR2206 BLC(2) Tu 3000 AA 2230 AR2206
H335 W748 N135
AR2206H H4895 IMR 4895 Tu 5000 AA 2460 AR2206H
AR2208 Varget IMR 4064 AA 2520 AR2208
IMR 4320 N201
N202 AA 2700 N140 / N540
H380 Reloader 15 N203
AR2209 H414 / H4350 IMR 4350 W760 Tu 7000 N204 AA 4350 N150 / N550 AR2209
H450 Reloader 19 N205
IMR 4831 WMR AA 3100 N160 / N560
AR2213SC H4831 AR2213SC
Reloader 22 IMR 7828 WXR Tu 8000 MRP N165
AR2217 H1000 N170 AR2217
AR2225 Retumbo Reloader 25 Magpro 24N41 AR2225
AR2218 H870 / H50BMG AA 8700 20N29 AR2218
NOTES:
Table shows only approximate equivalent values within about 5%.
Actual burning rates can vary depending on the calibre, weapon, loading components and
practices, as well as from powder lot to powder lot. As a consequence, it must be understood that
Thales cannot accept any responsibility for the use of this information in any way.
170
Burning Rate
Examples
BURNING RATE EXAMPLES
This section provides examples of applications for the ADI powders across the range of burning
rates.
EXAMPLES OF APPLICATION
POWDER BURNING RATE PISTOL SHOTGUN RIFLE
AS30N Fastest 12 Gauge Trap/Skeet Load
Trail Boss .45 Colt 45-70 Government
AP50N .45 ACP
AS50N 12 Gauge Trap/Sporting
AP70N 40-40 Winchester 12 Gauge Field Load
AP100 .38 Super Auto 20 Gauge
AR2205 357 Magnum 410 Gauge .22 Hornet
AR2207 .7mm TCU .222 Remington
Bench Mark 1 .223 Remington
AR2219 6mm PPC
Bench Mark 2 .22-250 Remington
AR2206 .308 Winchester
AR2206H 257 Roberts
AR2208 30-30 Winchester
AR2209 30-06 Springfield
AR2213SC 300 Win. Magnum
AR2217 7mm Rem. Magnum
AR2225 300 Rem. Ultra Magnum
AR2218 Slowest .30/378 Weatherby
171
5th edition
ADI Powders
172