Fenner India's appreciation of the <lhanglng market environment and commitment to customer

relationships is Qlumated ~ its fOOus on placing dle ~...,.rattheaweofits bu~ness.

I I

Fenner (India) Limited is a part ofthe prestigious 100 year old JK Organisation which

ranks among the top Industrial houses of India. Its assets exceed US $ 1.6 Billion with an

employee strength of 50,000. Product lines include Paper, Boards, Automobile Tyres and

Tubes, Cement, Cosmetics, Drugs and Pharmaceuticals, Consumer Durables, Agri -

Genetics, Sugar, Dairy Products, Textiles and Power Transmission products.

We have been Pioneers and Leaders in India for 50

Fenner (India) Limited was established in 1929 & commenced manufacturing in 1956.

years. Our core Product lines include Industrial and

Automotive Belts, Oil seals and Power Transmission

Accessories like Pulleys, Coupling and Gear boxes. In

India, we service the OEM, Maintenance &

Replacement markets as Power Transmission Solution

providers. With our products and service, we continue

to be market leaders in the Indian Industry. Today our

customer base is spread over 50 countries.

manufacturing facilities.

Fenner (India) Limited has a strong manufacturing base with three state-of-art

Corporate Office:

Fenner (India) Limited Khivraj Complex - 2, 480 Anna Salai,

Nandanam, Chennai 600 035, India.

Phone: 91 - 44 - 24312450 to 57 Fax: 91 - 44- 24349016, 24320193 Email: export@fennermail.com Website: www.fennerindia.com

Toll free # for USA: 1-888-6-TOPDRIVE (1-888-686-7374)

TOP DRIVE ™

TERMS & CONDITIONS

Prices:

Fenner (India) Limited maintains a standard price for all its products. Fenner (India) Limited reserves from time to time to alter the prices for its products, or these terms and conditions, with or without notice.

Dimensions:

All dimensions mentioned in this catalog are for reference only. Fenner (India) Limited, the manufacturer reserves the right to alter dimensions for any changes in manufacturing process. Schematic diagrams of the belt sections in the catalog are only indicative of the dimension and appearance of the section. Actual belt dimensions and appearance may vary as per manufacturer's specifications.

Weights:

All weights are approximate values and may vary slightly from actual weights

Application Exclusions:

Products Listed in this Catalog are not designed or intended for applications on, or used as replacement for:

I) Direct or accessory drives of aircrafts

2) Drives installed on lifts / elevator systems solely driven by belts used to either transport personnel or products.

Limited one year warranty:

a. The Seller warrants to the original purchaser that its products are free from defects in materials and workmanship forthe one (I) year period following the date of shipment of the product.

b. This warranty does not cover reimbursement for transport and handling charges, and is void on any product which was altered, misused, or damaged in any manner including but not limited to belt failure in either wrong or unintended applications. Products which have been, in the good faith discretion of the Seller, altered, misused or damaged shall be returned to the purchaser.

c. This warranty excludes incidental or consequential damages, and in no event shall the seller's liability under this warranty exceed the cost of the product purchased excluding all freight charges paid by the original purchaser. There are no warranties which extend beyond the description on the face of this guaranty. There is no implied warranty of merchantability or fitness for a particular purpose.

d. The seller's employees and representatives cannot change this warranty in anyway nor give any other warranty.

e. This warranty is personal to the original purchaser, and may therefore not be assigned by you or otherwise transferred to any other party. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you.

f. Buyer's exclusive remedy and the limit of seller's liability for breach of the limited warranty set forth herein, whether based on negligence, breach of warranty, strict liability, or any other theory, shall be, at seller's option, repair or replacement with a non-defective product or refund of the purchase price of the defective product only. On the Seller repairing or replacing with a non-defective product or refunding the price of the defective product, the Purchaser hereby waives the right to file, and hereby agrees not to accept any relief or recovery from, any lawsuit, charge, claim, complaint, or other proceeding, whether an individual, joint or class action (collectively "Legal Action") before any administrative agency, court or other forum against the Seller, or any of its parent, subsidiary or affiliated entities with respect to acts, events or omissions.

www.fennerindia.com

American Petroleum Institute

c.nt!'!.~ !!ir iliu!IlU'Nyto Lis!) tt-(! mtl~""J:"'" M3n~m

U .. _._ .. II'II.:.I;'

I~'~~~ ~.:o:.,!"""",~"",,,

n:-.;tii"R ,'''iril.~ ~ t 1~11J1

~~:'~~.

1+"':-~':"I!.'h:li""'~:'-.~I-"'iI"*II'~~~")O"(~11 ":~,,!"-"-"'''''''''_'''''''~,"~II...,.:-:_I'''''''_I~I'

.~ .. --"" ... ,...- ... _' ...... ..._-

i.._I,_.. __ N.:r.-.m"'""" ... -.....,....,..,..,_.tiiil-!-"'IT' ............ ,r~ ........

~_""""P.:"":-

~~~~:;:=..:':!!!~~:a-~;:,.~:~I'~~

11 ....... _ ........ 'Io.i.,'._ ......... "..,~ ..

American Petroleum Institute accredited Licence No : IB _ 0009

Environmental Management System

ISO 9001 :2000

ISOITS 16949:2002

... Jilnvlronmental Management System \1 Standard ISO 14001 , 1996

ISO 9001 , 2000 for DesIgn and Ma.nufaoturlng of V Belta for Industrial Applicatione.

~ •• ~ ••• II~ •• ~.'Ii •••• IN.lill I.~I

FilllfllU (m·",~~, I.hnltad .............. _.- ...... ..........

~.m~ioII

.....

. :::iiiiiiiiiil~;;li~~

~$1 ~a4~~~i!I~'

;11:1-------- .. ----- -

~-=--~...,_~ . _c~

~~

@-~

® !BOlTS 16949,2002 for Deatgn and :Manufacture of on SeaJs,V Belts, TImIng Belts and Moulded Rub_ Parts for Automotive Appl1ca.t1ons.

www.fennerindia.com

TOP DRIVE ™

General Information

Belt Installation & Maintenance page 1

Belt Cross Reference page 2

Product Preview page 3 to 7

Classical V Belts

"z" "/J:.' u8"

"C"

"0"

"E"

Section Belts page 8

Section Belts page 9

Section Belts page 10

Section Belts page II

Section Belts page 12

Section Belts page 12

Fractional Horse Power Belts

"3L.:' "4L.:' "SL.:'

Section Belts page 13

Section Belts page 13

Section Belts page 14

Narrow V Belts

Index

Cogged Metric Wedge Belts

"SPZX" Section Belts page 23

"SPAX" Section Belts page 24

"SPBX" Section Belts page 2S

"SPCX" Section Belts page 2S

Banded Belts

''/\' Section Belts page 26

"8" Section Belts page 26

"C" Section Belts page 26

"3V" Section Belts page 27

"SV" Section Belts page 27

"8V" Section Belts page 27

Hexagonal Belts

'M' Section Belts page 28

"BB" Section Belts page 28

"CC" Section Belts page 28

Multirib/Serpentine Belts

"PH" Section Belts page 29

"PJ" Section Belts page 29

"PL.:' Section Belts page 30

"PM" Section Belts page 30

Timing/HTD Belts

"XL.:'

Belts page 3 I

Belts page 32

Belts page 33

Belts page 34

Belts page 3S

Belts page 36

Belts page 37

Belts page 38

"3V" Section Belts page 15

"SV" Section Belts page 15

"8V" Section Belts page 15

Metric Wedge Belts

"SPZ" "SP.A:' "SPB" "SPC"

Section Belts page 16

Section Belts page 17

Section Belts page 18

Section Belts page 18

Cogged Classical V Belts

"AX" Section Belts page 19

"BX" Section Belts page 20

"CX" Section Belts page 21

Cogged Narrow V Belts

"3VX" Section Belts page 22

"SVX" Section Belts page 22

"t_:' "H"

"XH" "3M" "SM" "8M" "14M"

Trouble Shooting page 39

www.fennerindia.com

Tips on Belt Installation and Maintenance

Correct design of drives using V-Belts ensures longer belt life and a higher degree of operating safety. Premature failure can often be traced back to faulty installation or maintenance. Some useful tips are given below:

• PULLEYS: The grooves should be in good condition, free from scores or sharp edges, all dimensions should conform to the relevant ISO/RMA standards.

• ALIGNMENT: Shafts and pulleys should be correctly aligned prior to belt installation. A maximum tolerance of !h0 in both planes is recommended.

• INSTALLATION OF V BELTS: The drive center distance should be reduced prior to installation of belts so that they may be fitted without undue force. The severe stresses placed upon V Belts when they are forced over the pulley flanges can damage the cover fabric and the high quality, low stretch tension members.

• BELT TENSIONING: The drive should be tensioned correctly and re-tensioned after 30 minutes and 4 hours at full load, to compensate for the small initial belt stretch and "bedding" into the pulley grooves.

• IDLER PULLEYS: The use of idler pulleys should be avoided. If for design reasons, such an arrangement is necessary, then an inside idler should be used in preference to an outside idler. If the Idler pulleys have to be used for the foregoing reasons the following criteria should be observed in the drive design:

a. Position in the belt span

b. Diameter of the pulley

c. Shape

d. The adjustment travel of the pulley, both for tensioning and re-tensioning the belts

e. Correction of the power rating per belt

Minimum diameter for Internal idlers

Internal idler should be greater than or equal to smallest loaded pulley in the drive system.

Minimum diameter for External idlers

External idler should be greater than or equal to 1.35 times the smallest loaded pulley in the drive system.

External Idler (Flat)

• STORAGE & MAINTENANCE

The physical properties of V-Belts could change significantly over a period of time if not stored properly. It is important that the storage area is dust/moisture free, protected against direct sunlight/high intensity artificial light ego flourescent lights producing ozone, at a storage temperature of + 15°C (+S9°F) and +2SoC (+77°F). Belts should be stored without stress, tension or pressure.

It is recommended that V Belt drives be regularly inspected for loss of belt tension, unusual heat build up or wear. Re-tension or replace when necessary. Should an individual belt in a matched set require replacement for any reason, a complete new set must be fitted. Belts from different manufacturers must not be mixed on the same drive. V belts need no special attention. Belt dressings must not be used.

For further information log onto www.fennerindia.com or contact us by email onexj;!ort@fennermail.com

TOP DRIVE ™

www.fennerindia.com

Wrapped Belts

Raw Edge Cogged Belts (REC)

No. Name
I Cover Fabric
2 Top Fabric
J Top Cushion Rubber
4 Adhesion Rubber
5 Tension Member
6 Compression Rubber
7 Bottom Fabric
8 Laminate Fabric Dimensions

La (Outside Length) li (Inside Length) Lp (Pitch Length)

Le (Effective Length)

The length of a line circumscribing the belt along its periphery

its inner circumference. its pitch zone.

the level of the effective diameter

of the measuring pulleys whilst the v-belt is at a specified tension.

T - Top width of belt H - Height of belt

BELT CROSS REFERENCE - INDUSTRIAL

_~_·\!'_~_.li5_~

I
~ Y II Y - II - 6 II Y I
Z Z - M 10 Z
A A A A 13 A
B B B B 17 B
C C C C 22 C
D D II D II D II 32 II D
E E E " E 40 -
3V - II 3V/9N II 3V - -
SV - SV/ISN SV - -
BV - II BV/2SN II BV - -
SPZ SPZ " - ,I - SPZ SPZ
SPA SPA - - SPA SPA
SPB SPB - - SPB SPB
SPC SPC - - SPC SPC
2L - 2L - - -
3L - 3L - - -
4L - 4L - - -
SL - II SL II - II - II - ISO:

RMA:

JIS DIN BS FIL

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION RUBBER MANUFACTURERS ASSOCIATION, U.SA

JAPANESE INDUSTRIAL STANDARD

DEUTSCHE INDUSTRIE NORM EN, GERMANY

BRITISH STANDARD, U.K.

FENNER (INDIA) LIMITED

www.fennerindia.com

2

1M

TOP DRIVE CLASSICAL WRAPPED BELTS

Features

1 Specially designed Polyester-cotton blended fabric jacket impregnated with Polychloroprene Synthetic rubber

• Imparts superior flexibility, better traction, flex and wear resistance. This makes the belts oil and heat resistant as well as anti-static.

2 The High Modulus Low Stretch (HMLS) Polyester cords

• Enable the belts to carry higher horse power loads with minimum stretch resulting in better belt stability.

3 Stiff yet flex crack resistant base made out of specially compounded Polymers

• Ensures uniform load transfer to cords preventing power loss and premature belt failure.

4 The unique Length Stabilisation process ensures that the belts retain the tension and stay MATCHED not only in storage but more significantly 'on the drive' resulting in uniform loading and maximum life. Only one shot tensioning required.

All these features mean:

• Reduced down time

• Increased productivity and thus

• Increased profits

Typical Applications

1 General Engineering Industries

2 Machine Tools, Compressors, Fans & Blowers

3 Conveyors

4 Mining

5 Agricultural Implements

TOP DRIVE ™

www.fennerindia.com

3

TM

TOP DRIVE ENDURANCE PLUS NARROW V BELTS

Features

In addition to the standard features of TOPDRIVE wrapped belts, the benefits are:

• Made of 100% Polychloroprene base compound for higher endurance

• Higher power rating compared to Classical belts & hence more compact drives.

TM

TOP DRIVE METRIC WEDGE BELTS

Features

1 Has all the good features of wrapped belts & in addition has higher power rating compared to Classical Belts, which makes the drives more compact.

2 These are manufactured to European Standards and replaces belts on machines (with metric drives) made worldwide.

TM

TOP DRIVE FRACTIONAL HORSE POWER BELTS

Features

1 HMLS polyester cord gives low stretch and better flexibility

2 Polychloroprene rubberized poly cotton jacketing fabric imparts good ozone, grease, oil and heat resistance and antistatic properties.

3 Specially compounded base gives good flex fatigue resistance.

www.fennerindia.com

4

Typical Applications

1 Washing Machines, Dish Washers

2 Fans, Blowers and Centrifugal Pumps

3 Cream Separators

4 Garage Equipment

5 HVAC

TM

TOP DRIVE BANDED BELTS

Features

1 Eliminates belt whip, belt twist and belt turn.

2 Ideal for drives where pulsating loads are present.

3 The top cross cord layer protects the belt from external damage.

Typical Applications

1 Reciprocating Compressors & Pumps

2 Vibrating Screens

3 Agricultural Machinery

4 Stone Crushers

TM

TOP DRIVE HEXAGONAL BELTS

Features

1 Suitable for drives where belts bend both ways on several pulleys

2 Specially compounded base gives good flex fatigue resistance

Typical Applications

1 Agricultural Machinery

2 Textile Machines

3 Rice Mills

www.fennerindia.com

TOP DRIVE ™

5

TM

TOP DRIVE COGPOlUER COGGED BELTS

Features

1 Heat treated, High Modulus - Low Stretch (HMLS) Polyester Cord

2 Polychloroprene cushion rubber compound

3 Anisotropicallyoriented - short fiber filled Polychloroprene base compound

4 Specially designed moulded cogs for better flexibility, low heat generation and better belt cooling.

5 Precisely cut and ground Edges for uniform fit along the Pulley groove

Typical Applications

1 General Engineering Industries

2 Heavy Earthmoving Machinery Engines

3 Agricultural Machinery

4 Textile Machinery

TM

TOP DRIVE MULTI RIB I SERPENTINE BELTS

Design Features

1 Low stretch

2 Extremely flexible

3 Low Noise

4 Higher Speed ratios possible

5 Suitable for higher belt speeds upto 60m/sec

6 Heat & oil resistant and anti-static

www.fennerindia.com

6

Typical Applications

1 Washing Machines

2 Fitness Equipment

3 Machine Tools

4 Textile Machinery

TM

TOP DRIVE TIMING I HTD BELTS

Features

• Positive non-slip drive maintains exact speed ratio without creep or slip.

• Minimum heat build up results in cooler operations.

• Do not stretch in use.

• Corrosion free, clean operation makes them ideal for contamination sensitive applications.

• Moderately oil resistant and electrically conductive according to ISO 9563

• Can withstand temperatures between - 20 Deg C and I 00 Deg C.

Typical Applications

1 CNC Machine Tools

2 Textile Machinery

3 Printers, Copiers

4 Air Fin Coolers in Petrochemical Industries

TOP DRIVE ™

www.fennerindia.com

7

Classical Section V-Belts

Correas trapeciales de seccion clasica Keilriemen

Top width 'T' -3/8", 10 mm Height 'H' -7/32",6 mm

Section Z/ I 0

Z44

1140

4S.S

Z46

1190

47.S

Z8S

2180

86.S

ZS4

1400

SS.S

Heat and Oil resistant, Antistatic

Belt Weight: 0.059 kg/m,0.00330 lbs/lnch Outside lengths are approximate

Standards: DIN 2215, RMA IP 20, ISO 4184, BS 3790, API 1 B, JIS K 6323 Sizes not mentioned in this catalog can be supplied on request

For Kevlar range, consult Fenner India Limited.

www.fennerindia.com

8

Classical Section V-Belts

Correas trapeciales de seccion clasica Keilriemen

Section AI 13

490 20

520 JL 21

540 22

570 JL 23

1460

58

1480 JL 59

1510 60

1530 JL 61

Top width 'T' -1/2", 13 mm Height 'H' - 5/16",8 mm

A 78 2010 80

A 79 II 2040 JL 81

A 80 2070 82

A 81 JL 2090 JL 83

Heat and Oil resistant, Antistatic

Belt Weight: 0.108 kg/m, 0.00604 Ibs/inch Outside lengths are approximate

Standards: DIN 2215, RMA IP 20, ISO 4184, BS 3790, API 1 B, JIS K 6323 Sizes not mentioned in this catalog can be supplied on request

For Kevlar range, consult Fenner India Limited.

TOP DRIVE ™

www.fennerindia.com

9

Classical Section V-Belts

Correas trapeciales de seccion clasica Keilriemen

Heat and Oil resistant, Antistatic

Belt Weight: 0.182 kglm, 0.0 I 0 19 Ibs/inch Outside lengths are approximate

Standards: DIN 2215, RMA IP 20, ISO 4184, BS 3790, API 1 B, JIS K 6323 Sizes not mentioned in this catalog can be supplied on request

For Kevlar range, consult Fenner India Limited.

Top width 'T' - 21/32", 17 mm

Height 'H' -7/16", II mm

B 124 3190 127
L B 126 JL 3240 JL 129
B 128 3290 131
L B 130 JL 3350 JL 133
136
139
141
143
B 142 3650 145 Section Bf 17

B 20

550

23

B 63

1640

66

157

L B 158 JL 4060 JL 161
B 162 4160 165
L B 166 JL 4260 JL 169
B 173 4440 176
L B 180 JL 4620 JL 183
B 188 4820 191
L B 190 JL 4870 II 193 I B 21 II 580 II 24
B 22 600 25
I B 23 II 630 II 26
B 24 650 27
I B 25 II 680 II 28
B 26 700 29
I B 27 II 730 II 30
B 28 750 31
L B 29 II 780 JL 32
B 30 810 33
L B 31 II 830 JL 34
B 32 860 35
L B 33 JL 880 JL 36
B 34 910 37
L B 35 II 930 JL 38
B 36 960 39
L B 37 II 980 II 40
B 38 1010 41
L B 39 II 1030 JL 42
B 40 1060 43
L B 41 JL 1080 II 44
B 42 1110 45
L B 43 JL 1140 JL 46
B 44 1160 47
L B 45 JL 1190 JL 48
B 46 1210 49
L B 47 JL 1240 JL 50
B 48 1260 51
L B 49 JL 1290 JL 52
B 50 1310 53
L B 51 JL 1340 JL 54
B 52 1360 55
L B 53 JL 1390 JL 56
B 54 1410 57
L B 55 II 1440 JL 58
B 56 1470 59
L B 57 II 1490 JL 60
B 58 1520 61
I B 59 II 1540 II 62
B 60 1570 63
I B 61 II 1590 II 64 I B 64 II 1670 II 67
B 65 1690 68
I B 66 II 1720 II 69
B 67 1740 70
I B 68 II 1770 II 71
B 69 1800 72
I B 70 II 1820 II 73
B 71 1850 74
L B 72 JL 1870 JL 75
B 73 1900 76
L B 74 II 1920 II 77
B 75 1950 78
L B 76 II 1970 II 79
B77 2000 80
L B 78 JL 2020 JL 81
B 79 2050 82
L B 80 JL 2080 JL 83
B 81 2100 84
L B 82 JL 2130 JL 85
B 83 2150 86
L B 84 JL 2180 JL 87
B 85 2200 88
L B 86 JL 2230 JL 89
B 87 2250 90
L B 88 JL 2280 JL 91
B 89 2300 92
L B 90 JL 2330 JL 93
B 91 2350 94
L B 92 JL 2380 JL 95
B 93 2410 96
L B 94 JL 2430 JL 97
B 95 2460 98
L B 96 JL 2480 JL 99 B 62

1620

65

www.fennerindia.com

10

Classical Section V-Belts

Correas trapeciales de seccion clasica Keilriemen

Section C/22

C 95

2470

99

Heat and Oil resistant, Antistatic

Belt Weight: 0.299 kg/m,O.O 1674 lbs/lnch Outside lengths are approximate

Standards: DIN 2215, RMA IP 20, ISO 4184, BS 3790, API 1 B, JIS K 6323 Sizes not mentioned in this catalog can be supplied on request

For Kevlar range, consult Fenner India Limited.

[ 1000 lr 41
1020 42
r 1050 lr 43
1070 44
[ 1100 lr 45
1120 46
[ 1150 lr 47
1170 48
[ 1200 lr 49
1220 50
[ 1250 lr 51
1280 52
[ 1330 lr 54
1350 55
r 1400 lr 57
1430 58
r 1450 lr 59
1500 61
r 1580 lr 64
1630 66
r 1660 lr 67
1710 69
r 1760 lr 71
1780 72
r 1810 II 73
1830 74
r 1860 II 75
1880 76
r 1910 II 77
1960 79
r 1990 II 80
2040 82
r 2090 II 84
2110 85
r 2160 lr 87
2190 88
r 2220 lr 89
2270 91
r 2340 lr 94
2390 96
r 2420 lr 97 [ C 96 lr 2490 100 1
C 97 2520 101
[ C 99 lr 2570 103 ]
C 100 2600 104
[ C 101 lr 2620 105 1
C 103 2670 107
[ C 105 lr 2720 lr 109 1
C 106 2750 110
[ C 107 lr 2770 lr III 1
C 108 2800 II 112
[ C 109 lr 2820 lr 113 1
CliO 2850 II 114
[ C III lr 2880 lr 115 1
C 112 2900 116
r ells lr 2980 119 1
C 116 3000 120
r C 118 lr 3050 122 1
C 120 3100 124
r C 122 lr 3150 126 1
C 124 3210 128
r C 126 lr 3260 130 1
C 128 3310 132
r C 130 lr 3360 134 1
C 136 3510 140
r C 140 II 3610 II 144 I
C 144 3710 148
r C 148 II 3820 II 152 I
C 150 3870 154
r C 152 II 3920 II 156 I
C 156 4020 160
r C 158 II 4070 II 162 I
C 162 4170 166
r C 170 II 4370 II 174 I
C 173 4450 177
r C 180 lr 4630 184 1
C 185 4760 189
r C 190 lr 4880 194 1 Top width 'T' -7/8", 22 mm Height 'H' -17/32", 14 mm

TOP DRIVE ™

www.fennerindia.com

11

Classical Section V-Belts

Correas trapeciales de seccion clasica Keilriemen

Section

E

Section 0/32

D

Top width 'T' I 1/4",32mm I 1/2", 38mm

Height 'H' 3/4", 19mm 29/32", 23mm

D314

8060

319

Section El3S

D450

11510

455

Heat and Oil resistant, Antistatic

Belt Weight D: 0.608 kg/m,0.03403 Ibs/inch Belt Weight E: 0.907 kg/m, 0.OS076Ibs/inch Outside lengths are approximate

Standards: DIN 2215, RMA IP 20, ISO 4184, BS 3790, API 1 B, JIS K 6323 Sizes not mentioned in this catalog can be supplied on request

For Kevlar range, consult Fenner India Limited.

www.fennerindia.com

12

Fractional Horse Power Belts Correas trapeciales de seccion clasica Keilriemen

Section lL

•

3L700

70

Section 4L

4L255

25.5

4L270

27.0

4L290

29.0

Heat and Oil resistant, Antistatic

Belt Weight 3L: 0.059 kg/m,0.00330 Ibs/inch Belt Weight 4L: 0.108 kg/m, 0.00604 Ibs/inch Standards: RMA IP 23

Sizes not mentioned in this catalog can be supplied on request

For Kevlar range, consult Fenner India Limited.

Section 3L 4L
Top width 'T' 3/8 1/2"
Height 'H' 7/32 5/16" 4L570

57.0

4L990

99.0

4L590

59.0

www.fennerindia.com

TOP DRIVE ™

4L630

63.0

13

Fractional Horse Power Belts Correas trapeciales de seccion clasica Keilriemen

Section SL

5L410

41.0

5L830

83.0

Top width 'T' - 21/32"

Height 'H' - 3/8"

5L430

43.0

5L450

45.0

5L850

85.0

5L870

87.0

Heat and Oil resistant, Antistatic

Belt Weight: 0.182 kg/m, 0.0 I 0 19 Ibs/inch Standards: RMA I P 23

Sizes not mentioned in this catalog can be supplied on request

For Kevlar range, consult Fenner India Limited.

www.fennerindia.com

14

Narrow V-Belts Correas trapeciales

Endlose Hochleistungs-Schmalkeilriemen

Section lV

Section SV

••

••

3V 1 400 140.0

5V3550 355.0

Heat and Oil resistant, Antistatic

Belt Weight-3V: 0.079 kg/m, 0.00442 Ibs/inch Belt Weight-5V: O.ISI kg/m, 0.0 I 0 13 Ibs/inch Belt Weight-SV: 0.561 kg/m, 0.03140 Ibs/inch Standards: RMA IP 22, API 1 B

Sizes not mentioned in this catalog can be supplied on request

For Kevlar range, consult Fenner India Limited.

Section 3V 5V 8V
Top width 'T' 3/8" 5/8" I"
Height 'H' 21/64" 35/64" 7/8" Section 8V

••

8V5600 560.0

www.fennerindia.com

TM

TOP DRIVE ENDURArlCE PLUS

15

Metric Wedge Belts

Correas trapeciales estrechas

Endlose Hochleistungs-Schmalkeilriemen

Section SPZ

SPZ682

682

SPZI180

1180

SPZI737

1737

Top width 'T' - 10 mm

Height 'H' - 8 mm

SPZ737

737

SPZI202

1202

SPZI762

1762

SPZ758

758

SPZI237

1237

SPZI837

1837

SPZI262

1262

SPZ I 862

1862

Heat and Oil resistant, Antistatic

Belt Weight: 0.079 kg/m, 0.00442 Ibs/inch Standards: DIN 7753, ISO 4184, BS 3790

Sizes not mentioned in this catalog can be supplied on request

For Kevlar range, consult Fenner India Limited.

www.fennerindia.com

16

Metric Wedge Belts

Correas trapeciales estrechas

Endlose Hochleistungs-Schmalkeilriemen

Section SPA

820

832

850

SPA 1207 1207 L SPAI232JL 1232 SPAI250 1250 L SPAI257JL 1257

S 360 360

PAl I J
[SPAI375JL 1375
SPAI382 1382
[SPAI400JL 1400
SPAI407 1407
[SPAI425JL 1425
SPAI430 1430
l SPAI432Jl 1432
SPAI450 1450
l SPAI457Jl 1457
SPAI482 1482
l SPAI500Jl 1500
SPAI507 1507
l SPAI525Jl 1525
SPAI532 1532
l SPAI550 II 1550
SPAI557 1557
l SPAI582 II 1582
SPAI600 1600
l SPAI60711 1607
SPAI630 1630
l SPAI632 II 1632
SPAI650 1650
l SPAI657 II 1657
SPAI662 1662
L SPAI675JL 1675
SPAI680 1680
L SPAI682JL 1682
SPAI700 1700
L SPAI707JL 1707
SPAI732 1732
L SPAI750JL 1750
SPAI757 1757
L SPAI782JL 1782
SPAI800 1800
L SPAI807JL 1807
SPAI832 1832
[SPAI850JL 1850
SPAI857 1857
[SPAI882JL 1882
SPAI900 1900
[SPAI907JL 1907 ••

I J
[ 1950
1982
[ 2000
2032
[ 20~L
2082
l2120
2132
l2182
2207
l2221.
2232
l2240
2282
l2300
2307
l2332
2360
l2382
2432
l2482
2500
l2532
2582
L 2607
2650
L 2682
2732
L 2782
2800
L 2832
2882
L 2982
3000
L 3070
3082
[ 3150
3182
[ 3282
3350
[ 3482 Heat and Oil resistant, Antistatic

Belt Weight: 0.125 kg/m, 0.00700 Ibs/inch Standards: DIN 7753, ISO 4184, BS 3790

Sizes not mentioned in this catalog can be supplied on request

For Kevlar range, consult Fenner India Limited.

Top width 'T' - 13 mm Height 'H' - 10 mm

www.fennerindia.com

TOP DRIVE ™

17

Metric Wedge Belts

Correas trapeciales estrechas

Endlose Hochleistungs-Schmalkeilriemen

Section SPB

SPB 1250 1250

I
[SPBI260JL 1260
SPBI320 1320
[ SPB 134011 1340
SPBI400 1400
[SPB141011 1410
SPBI450 1450
[ SPB 1500JL 1500
SPBI510 1510
[ SPB I 590J[ 1590
SPB I 600 1600
[ SPB I 627J[ 1627
SPB I 690 1690
[ SPB 1700J[ 1700
SPBI800 1800
[ SPB 1900J[ 1900
SPB2000 2000
[ SPB2020J[ 2020
SPB2098 2098
[ SPB21201r 2120
SPB2150 2150
[ SPB21801r 2180
SPB2240 2240
[ SPB22801r 2280
SPB2300 2300
[ SPB23601r 2360
SPB236I 2361
[ SPB24101r 2410
SPB2500 2500
r SPB25301r 2530
SPB2650 2650
r SPB26801r 2680
SPB2800 2800
r SPB29901r 2990
SPB3000 3000
r SPB31501r 3150
SPB3350 3350
I SPB355011 3550
SPB3750 3750
r SPB3800 II 3800
SPB4000 4000
r SPB425011 4250 Heat and Oil resistant, Antistatic

Belt Weight SPB / 17N : 0.181 kg/m, 0.0 I 0 13 Ibs/inch Belt Weight SPC / 22 N : 0.348 kg/m, 0.01948 Ibs/inch Standards: DIN 7753, ISO 4184, BS 3790

Sizes not mentioned in this catalog can be supplied on request

For Kevlar range, consult Fenner India Limited.

Section

Top width 'T'

Height 'H'

17mm

13mm

SPB

18mm

SPC

22mm

Section SPC

www.fennerindia.com

18

Cogged Classical V Belts

Courreas trapeciales - de flancos abiertos, dentadas Keilriemen flankenoffen, formgezahnt

Section AX

I

Heat and Oil resistant, Antistatic

Belt Weight: 0.102 kg/m, 0.00571 Ibs/inch Standards: DIN 7753, RMA IP 20, BS 3790, API 1 B

Sizes not mentioned in this catalog can be supplied on request

Top width 'T' -1/2", 13 mm Height 'H' - 5/16", 8 mm

I

www.fennerindia.com

TM

TOP DRIVE COGPOlUER

19

TM -------------------------------------------------------------------

TOP DRIVE COGPOUJER

Cogged Classical V Belts

Courreas trapeciales - de flancos abiertos, dentadas Keilriemen flankenoffen, formgezahnt

Section BX

Heat and Oil resistant, Antistatic

Belt Weight: 0.163 kglm, 0.00912 Ibs/inch Standards: DIN 7753, RMA IP 20, BS 3790, API 1 B

Top width 'T' - 21/32", 17 mm Height 'H' - 13/32", I I mm

Sizes not mentioned in this catalog can be supplied on request

www.fennerindia.com

20

Cogged Classical V Belts

Courreas trapeciales - de flancos abiertos, dentadas Keilriemen flankenoffen, formgezahnt

CX28 770 32

ex 75 1960 79
LCX76 JL 1990 JL 80
CX77 2010 81
LCX78 JL 2040 JL 82
1070 83 lr 59
60
lr 62
63

CXl18 3050 122

CXl23 3180 127

CXl33 137
CXI44 148
eXI58 4070 162 Section ex

Pitch Outside
Size Length in Length in
Ref. mm inches
(Lp) (La)
, CX 195 5010 199

Heat and Oil resistant, Antistatic

Belt Weight: 0.289 kg/m, 0.01618 Ibs/inch Standards: DIN 7753, RMA IP 20, BS 3790, API 1 B

Sizes not mentioned in this catalog can be supplied on request

Top width 'T' -7/8", 22 mm Height 'H' -17/32", 14 mm

www.fennerindia.com

TM

TOP DRIVE COGPOlUER

21

TM -------------------------------------------------------------------

TOP DRIVE COGPOUJER

Cogged Narrow V Belts

Courreas trapeciales - de flancos abiertos, dentadas Keilriemen flankenoffen, formgezahnt

Section lVX

Section SVX

Section

5VX

Height 'H'

3VX

Top width 'T'

•

Sizes not mentioned in this catalog can be supplied on request

3/8"

21/64"

5/8"

35/64"

•
3VX 250 25.0
3VX 280
3VX 300
3VX 315
3VX 335
3VX 355
3VX 375
3VX 400
3VX 425
3VX 450
3VX 475
3VX 500
3VX 530
3VX 560
3VX 600
3VX 630
3VX 670
3VX 710
3VX 750
3VX 800
3VX 850
3VX 900
3VX 950
3VX 1000
3VX 1060
3VX 1120
3VX 1180
3VX 1250
3VX 1320
3VX 1400 Heat and Oil resistant, Antistatic

Belt Weight 3VX: 0.073 kg/m, 0.00409 Ibs/inch Belt Weight SVX: 0.173 kg/m, 0.00968 Ibs/inch Standards: RMA IP 22, API 1 B

www.fennerindia.com

22

Cogged Metric Wedge Belts

Courreas trapeciales - de flancos abiertos, dentadas Keilriemen flankenoffen, formgezahnt

Section SPZX

•

Heat and Oil resistant, Antistatic

Belt Weight: 0.073 kg/m, 0.00409 Ibs/inch Standards: DIN 7753, BS 3790

Sizes not mentioned in this catalog can be supplied on request

Top width 'T' - 10 mm

Height 'H' - 8 mm

www.fennerindia.com

TM

TOP DRIVE COGPOlUER

23

TM ----------------------------------------------------------------------

TOP DRIVE COGPOUJER

Cogged Metric Wedge Belts

Courreas trapeciales - de flancos abiertos, dentadas Keilriemen flankenoffen, formgezahnt

Section SPAX

•

Heat and Oil resistant, Antistatic

Belt Weight: 0.123 kg/m, 0.00688 Ibs/inch Standards: DIN 7753, BS 3790

Sizes not mentioned in this catalog can be supplied on request

Top width 'T' - 13 mm Height 'H' - 10 mm

www.fennerindia.com

24

Cogged Metric Wedge Belts

Courreas trapeciales - de flancos abiertos, dentadas Keilriemen flankenoffen, formgezahnt

Section SPBX

Heat and Oil resistant, Antistatic

Belt Weight SPBX: 0.173 kg/m, 0.00968 Ibs/inch Belt Weight SPCX: 0.290 kg/m, 0.01623 Ibs/inch Standards: DIN 7753, BS 3790

Sizes not mentioned in this catalog can be supplied on request

Section SPBX SPCX
Top width 'T' 16mm 22mm
Height 'H' 13mm 18mm Section SPCX

www.fennerindia.com

TM

TOP DRIVE COGPOlUER

25

Banded Belts

Correas multiples formadas por correas trapeciales Kraftband

Section A

Section B

I-T-I

: •••

842 1110
843 lr 1140 1
846 1210
850 lr 1310 1
855 1440
860 lr 1570 1
865 1690
867 lr 1740 1
870 1820
873 lr 1900 1
875 1950
880 lr 2080 1
882 2130
885 lr 2200 1
890 2330
895 lr 2460 1 Section A B C
Top width 'T' 1/2",13 mm 21/32",17mm 7/8",22 mm
Height 'H' 5/16",8 mm 7/16", II mm 17/32",14mm
N- No. of ribs Section C

AlSO

3850

8300

7660

Heat and Oil resistant, Antistatic Max no.of ribs: A:42" -ISO": 6

B:42" - 173": 6 ; 74" - 598": 5 C:62" - 120": 4; 121" - 598": 5 Standards: DIN 7753, RMA IP 20, API 1 B

Sizes not mentioned in this catalog can be supplied on request

www.fennerindia.com

26

Banded Belts

Correas multiples formadas por correas trapeciales Kraftband

Section lV

I-T-I

: •••

Section 3V 5V BV
Top width 'T' 3/S" 5/S" 1"
Height'H' 21/64" 35/64" 7/S" Section SV Section 8V

N- No. of ribs

3V450 45

L 3V475 JL 47.5
3V500 50
L 3V530 JL 53
3V560 56
[ 3V600 ][ 60
3V630 63
[ 3V710 'll 71
3V750 75
[ 3V800 ][ 80
3V850 85
[ 3V900 ][ 90
3V950 95
[ 3VI000][ 100
3VI060 106
f 3VI120 If 112
3VI180 118
f 3VI250 If 125
3VI320 132
f 3VI400 If 140 5VI320 132

[ 5VI4001r 140
5VI500 150
[ 5VI600][ 160
5VI700 170
[ 5VI800][ 180
5VI900 190
[ 5V2000][ 200
5V2120 212
[ 5V2240][ 224 Heat and Oil resistant, Antistatic

Max: no.of ribs: 3V:420-1500: 6 5V:950-1750:6; 1760-5980:5 8V: 1000- 5980: 5

Standards: RMA IP 22, API 1 B

Sizes not mentioned in this catalog can be supplied on request

For Kevlar range, consult Fenner India Ltd.

8VI000 100

1
L 8VI060JL 106
8VI120 112
L 8VI180JL 118
8VI250 125
L 8VI320JL 132
8VI400 140
[ 8VI500][ 150
8VI600 160
[ 8VI700][ 170
8VI800 180
[ 8VI900][ 190
8V2000 200
[ 8V2120][ 212
8V2240 224
[ 8V2360][ 236
8V2500 250
f 8V26501f 265
8V2800 280
f 8v30001f 300
8V3150 315
f 8V33501f 335
8V3550 355
f 8V37501f 375
8V4000 400
f 8V42501f 425
8V4500 450
f 8V4750 II 475
8V5000 500
I 8V5600 II 560 www.fennerindia.com

TOP DRIVE ™

27

Hexagonal Belts Correas hexagonales Doppelkeilriemen

I-T-I

Section AA

17

22

T

Height 'H' 10

Top width 'T' 13

Section CC

BB

cc

SectionAA

Section aa

13

17

-

BB62 BB68J~..._._.. ......... BB75 BB90J~= .........

Heat and Oil resistant, Antistatic

Standards: DIN 7722, ASAE S 21104, ISO 5289, RMA IP 21

Sizes not mentioned in this catalog can be supplied on request

www.fennerindia.com

28

Multirib/Serpentine Belts Correas Poly-V Rippenband

Section PH
•
520 H

54

560 H 56

610H 61

655 H Section PJ

1422

1549

Heat and Oil resistant, Antistatic

Belt Weight PH: 0.006 kg/rib mtr, 0.00034 Ibs/inch

Belt Weight PJ: 0.0 I 0 kg/rib mtr, 0.00056 Ibs/inch Standards: RMA IP 26, SAE J 1459, ISO 9981, JASO E 109 Max: no.of ribs: PH: 24 ; PJ: 24

Sizes not mentioned in this catalog can be supplied on request

Section PH PJ
Pitch 'P' 0.06" ; 1 .60mm 0.092" ; 2.34mm
Height 'H' 0.01 I" ; 2.80mm 0.16" ; 3.8mm www.fennerindia.com

TOP DRIVE ™

29

Multirib/Serpentine Belts Correas Poly-V Rippenband

Heat and Oil resistant, Antistatic

Belt Weight PL: 0.037 kg/rib mtr, 0.00207 Ibs/inch

Belt Weight PM: 0.120 kg/rib mtr, 0.00672 Ibs/inch Standards: RMA IP 26, SAE J 1459, ISO 9981, JASO E 109 Max no.of ribs: PL: 50; PM: 36

PM

Section PL

Sizes not mentioned in this catalog can be supplied on request

Section

PL

Pitch 'P'

0.185"; 4.70mm 0.37"; 9.40mm

Height 'H'

0.38" ; 7mm 0.66" ; 13.5mm

Section PM

I

www.fennerindia.com

30

Timing Belts

Correas planas dentadas Zahnflachriemen

(All dimensions in mm)

Section XL - Pitch 1/5"

I 24XL 12.40 62
126XL JL 12.60 JL 63
130XL 13.00 65
132XL JL 13.20 JL 66
I 36XL 13.60 68
140XL JL 14.00 II 70
I 46XL 14.60 73
150XL JL 15.00 II 75
I 54XL 15.40 77
160XL JL 16.00 JL 80
I 66XL 16.60 83
170XL JL 17.00 JL 85 580XL 58.00

290

630XL 63.00

315

Standard widths:

1/4" (Code 025) 5/16" (Code 031) 3/8" (Code 037) 1/2" (Code 050) 3/4" (Code 075) Standards: RMA IP 24

120 XL 037

1 T.......__L_

Width 0.375" Pitch

Pitch length 12"

For a complete list of sizes, consult Fenner India Limited.

TOP DRIVE ™

www.fennerindia.com

31

Timing Belts

Correas planas dentadas Zahnflachriemen

(All dimensions in mm)

~-~1

4.1'2-- 9.525

•

660L

Section L - Pitch 3/8"

Standard widths:

1/2" (Code 050) 3/4" (Code 075)

I" (Code 100)

I W' (Code 150)

2" (Code 200) Standards: RMA IP 24

For a complete list of sizes, consult Fenner India Limited.

www.fennerindia.com

32

Timing Belts

Correas planas dentadas Zahnflachriemen

Section H - Pitch 1/2"

240H 24.00 48
l 250H Jl 25.00 JL 50
260H 26.00 52
l 270H Jl 27.00 JL 54
280H 28.00 56
l 285H Jl 28.50 JL 57
290H 29.00 58
l 300H Jl 30.00 JL 60
330H 33.00 66
l 350H Jl 35.00 JL 70
355H 35.50 71
l 360H Jl 36.00 Jl 72
365H 36.50 73
l 370H Jl 37.00 II 74
375H 37.50 75
l 380H Jl 38.00 Jl 76
390H 39.00 78
I 395H Jl 39.50 II 79
400H 40.00 80
I 445H Jl 44.50 Jl 89
450H 45.00 90
L 460H JL 46.00 JL 92
480H 48.00 96
L 485H JL 48.50 II 97 Standard widths: 3/4" (Code 075) I" (Code 100) l!n" (Code 150)

2" (Code 200)

3" (Code 300)

Standards: RMA IP 24

For a complete list of sizes, consult Fenner India Limited.

(All dimensions in mm)

I

--~~

www.fennerindia.com

TOP DRIVE ™

33

Timing Belts

Correas planas dentadas Zahnflachriemen

(All dimensions in mm)

Section XH - Pitch 7/8"

-~

•

1 750XH 175.00 200

Standard widths:

2" (Code 200)

3" (Code 300)

4" (Code 400)

5" (Code 500) Standards: RMA IP 24

For a complete list of sizes, consult Fenner India Limited.

www.fennerindia.com

34

Timing Belts

Correas planas dentadas Zahnflachriemen

Section 3M - Pitch 3mm

I

34 1
[ 37
39
r 40
47
[ 50
53
[ 56
59
[ 60
62
[ 64
68
[ 69
70
r 71
74
[ 75
76
[ 78
79
[ 80
82
[ 90
92
[ 94 1209-3M 1209 403

I 1 245-3M II 1245 II 415

(All dimensions in mm)

1125 3M 20

1 TL...--L_

Standard widths:

6mm, 9mm, 15mm, 20mm & 30mm Standards: RMA IP 24

For a complete list of sizes, consult Fenner India Limited.

Widthmm Pitch

Pitch length mm

TOP DRIVE ™

www.fennerindia.com

35

Timing Belts

Correas planas dentadas Zahnflachriemen

•

(All dimensions in mm)

Section SM - Pitch Smm

200-5M 200 40 1
l 225-5M II 225 II 45
280-5M 280 56
I 285-5M II 285 II 57
295-5M 295 59
I 300-5M II 300 II 60
305-5M 305 61
I 310-5M II 310 II 62
320-5M 320 64
I 325-5M II 325 II 65
330-5M 330 66
I 365-5M II 365 II 73
370-5M 370 74
r 375-5M II 375 II 75
385-5M 385 77
r 395-5M II 395 II 79
400-5M 400 80
[ 440-5M II 440 II 88
445-5M 445 89
[ 450-5M II 450 II 90
460-5M 460 92
[ 470-5M II 470 II 94
505-5M 505 101
[ 520-5M][ 520 If 104 525-5M 525 105
[ 560-5M][ 560 1 112 ]
565-5M 565 113
[ 570-5M][ 570 1 114 1
575-5M 575 115 Standard widths:

9mm, ISmm, 20mm, 2Smm & 30mm Standards: RMA IP 24

715 143

I
l 725 II 145 J
740 148
I 790 I 158 I
800 160
I 810 I 162 I
825 165
I 830 I 166 I
835 167
I 850 I 170 I
860 172
I 870 I 174 I
960 192
r 975 II 195 1 For a complete list of sizes, consult Fenner India Limited.

www.fennerindia.com

36

Timing Belts

Correas planas dentadas Zahnflachriemen

Section 8M - Pitch 8mm

I

36
I 48
50
r 51
52
r 64
65
r 67
70
r 71
80
[ 82
85
[ 86
87
[ 89
90
r 91
95
r 97
100
[ 102
103
[ 105 680-8M 680

I 424-8M 1424

178

Standard widths:

20mm, 30mm, SOmm & 8Smm Standards: RMA IP 24

For a complete list of sizes, consult Fenner India Limited.

www.fennerindia.com

TOP DRIVE ™

37

Timing Belts

Correas planas dentadas Zahnflachriemen

(All dimensions in mm)

Section 14M - Pitch 14mm

Standard widths:

40mm, 55mm, 85mm, I 15mm & 170mm Standards: RMA IP 24

For a complete list of sizes, consult Fenner India Limited.

For sizes in MXL, XXH, 20M, T2.5, T5, TIO, T20 & Double sided Timing & HTD Belts, STD Belts and Torque Drive Plus belts, please consult Fenner India Ltd.

www.fennerindia.com

38

PROBLEM

CAUSE

REMEDY

Belt breaking after fitting

Forcing belt over pulley when fitting, damaging cord and cover.

Reduce drive center distance to fit belt.

Ingress of Fit an effective guard

foreign bodies

e.g. a stone,

during running.

Cuts and Outside idler Replace with inside idler.
splits in the pulley in use. pulley on the slack side
base of of the drive. Increase
the belt the size ofthe existing
idler.
Pulley diameter Redesign using
too small. recommended
minimum pulley pitch
diameters.
Ambient Ensure good ventilation
temperature and protect the belts
too high from direct heat.
(above + 70°CI-*
158°f)
Ambient Warm area surrounding
temperature drive.
too Low
(below - 40°C/-
104°C)
Abnormal belt Check drive design to
slip. ensure correct number
of belts, redesign if
necessary. Check the
drive tension.
Contamination Protect drive from
by oil or contamination.
Chemicals. Severe belt Drive has Check drive design and
vibration insufficient modify if necessary.
belts.
Center distance Shorten centers.
longer than Use an inside idler in
recommended. the drive slack side.
High shock Use an inside idler
loading. pulley in the slack side.
Too low belt Correct the belt
tension. tension.
Unbalanced Balance pulleys.
pulleys. PROBLEM

CAUSE

REMEDY

Belts turn

Poor drive

Realign the pulleys.

over in pulleys alignment.

Excessive belt flap.

Use an inside idler in the slack side.

Low belt tension.

Re-tension.

Worn out belt. Replace with the new belt.

Excessive Incorrect pulley Replace with correct
wear on belt groove angle. pulley groove angle.
flanks
Incorrect Replace with new
pulley section. pulleys.
Excessive Replace with new
wear in pulleys.
grooves.
Drive Realign.
misalignment.
Small pulley Redesign using
diameter below correct pulley
recommended diameters.
minimum.
Belt catching Remove protrusions or
on protruding move drive away.
parts.
Belt swelling Contamination Protect drive from
or softening by oil or other contamination.
chemicals.
Unusual Worn or Replace with new
belt stretch wrongly pulleys.
machined
pulley grooves.
Used belts Replace with a
mixed with Completely new set
new belts on of belts.
the drive.
Belts from For use as matched set,
different belts must be from one
manufacturers manufacturer.
used on same
drive.
Wrong drive Redesign the drive with
design / lesser correct number
number of of belts / section.
belts / wrong
belt section. www.fennerindia.com

TOP DRIVE ™

39

Notes

www.fennerindia.com

40