Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Problem 3

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 6

Problem 3.

9:
Distillation Number of The Stage of Heating Rate Cooling Rate
Column Feed Stages the input feed (MMBtu/hr) (MMBtu/hr)
Pressure (atm)
1 12 7 7.65 6.41
5 12 7 7.22 5.99

Flow sheet :
Stream table:

  B B2 D D2 INPUT INPUT2
             
Temperature C 115.8 114.3 83.5 83.7 25 25
Pressure bar 2 2 2 2 1.013 5.066
Vapor Frac 0 0 0 0 0 0
Mole Flow kmol/hr 58.667 58.667 136.889 136.889 195.555 195.555
1113.07 1132.6 4330.03 4310.46 5443.10 5443.10
Mass Flow kg/hr 5 4 3 8 8 8
Volume Flow cum/hr 1.282 1.318 6.003 5.971 6.634 6.634
Enthalpy MMkcal/hr -3.858 -3.843 -7.635 -7.65 -11.804 -11.804
Mass Flow kg/hr
173.02 4257.87 4213.18 4386.21 4386.21
METHA-01 128.334 7 9 6 3 3
959.61 1056.89 1056.89
WATER 984.742 4 72.154 97.282 6 6
Mass Frac
METHA-01 0.115 0.153 0.983 0.977 0.806 0.806
WATER 0.885 0.847 0.017 0.023 0.194 0.194
Mole Flow kmol/hr
METHA-01 4.005 5.4 132.884 131.489 136.889 136.889
WATER 54.661 53.267 4.005 5.4 58.667 58.667
Mole Frac
METHA-01 0.068 0.092 0.971 0.961 0.7 0.7
WATER 0.932 0.908 0.029 0.039 0.3 0.3
Liq Vol 60F cum/hr
METHA-01 0.162 0.218 5.36 5.304 5.521 5.521
WATER 0.987 0.961 0.072 0.097 1.059 1.059
Liq Frac 60F
METHA-01 0.141 0.185 0.987 0.982 0.839 0.839
WATER 0.859 0.815 0.013 0.018 0.161 0.161

Input summery:

;Input Summary created by Aspen Plus Rel. 22.0 at 21:40:45 Mon Nov 9, 2009

;Directory C:\Documents and Settings\chestudent\Local Settings\Temp Filename


C:\DOCUME~1\CHESTU~1\LOCALS~1\Temp\~ap76.tmp

;
DYNAMICS

DYNAMICS RESULTS=ON

TITLE 'HW'

IN-UNITS MET VOLUME-FLOW='cum/hr' ENTHALPY-FLO='Gcal/hr' &

HEAT-TRANS-C='kcal/hr-sqm-K' PRESSURE=bar TEMPERATURE=C &

VOLUME=cum DELTA-T=C HEAD=meter MOLE-DENSITY='kmol/cum' &

MASS-DENSITY='kg/cum' MOLE-ENTHALP='kcal/mol' &

MASS-ENTHALP='kcal/kg' HEAT=Gcal MOLE-CONC='mol/l' &

PDROP=bar

DEF-STREAMS CONVEN ALL

SIM-OPTIONS OLD-DATABANK=YES

DESCRIPTION "

General Simulation with Metric Units :

C, bar, kg/hr, kmol/hr, Gcal/hr, cum/hr.

Property Method: None

Flow basis for input: Mole


Stream report composition: Mole flow

"

DATABANKS PURE22 / AQUEOUS / SOLIDS / INORGANIC / &

NOASPENPCD

PROP-SOURCES PURE22 / AQUEOUS / SOLIDS / INORGANIC

COMPONENTS

METHA-01 CH4O /

WATER H2O

FLOWSHEET

BLOCK ONEATM IN=FEEDA OUT=D B

BLOCK FIVEATM IN=FEEDB OUT=D2 B2

PROPERTIES NRTL

PROPERTIES ELECNRTL / IDEAL

PROP-SET PS-1 TEMP KVL GAMMA MOLEFRAC SUBSTREAM=MIXED &

COMPS=METHA-01 WATER PHASE=V L

STREAM FEEDA

SUBSTREAM MIXED TEMP=25. PRES=1. <atm> &


MASS-FLOW=12000. <lb/hr>

MOLE-FLOW METHA-01 0.7 / WATER 0.3

STREAM FEEDB

SUBSTREAM MIXED TEMP=25. PRES=5. <atm> &

MASS-FLOW=12000. <lb/hr>

MOLE-FLOW METHA-01 0.7 / WATER 0.3

BLOCK FIVEATM RADFRAC

PARAM NSTAGE=12

COL-CONFIG CONDENSER=TOTAL

FEEDS FEEDB 7

PRODUCTS D2 1 L / B2 12 L

P-SPEC 1 2.

COL-SPECS D:F=0.7 MOLE-RR=0.35

BLOCK ONEATM RADFRAC

PARAM NSTAGE=12

COL-CONFIG CONDENSER=TOTAL

FEEDS FEEDA 7

PRODUCTS B 12 L / D 1 L

P-SPEC 1 2.

COL-SPECS D:F=0.7 MOLE-RR=0.45

EO-CONV-OPTI
STREAM-REPOR MOLEFLOW MASSFLOW MOLEFRAC MASSFRAC

PROP-TABLE BINRY-1 FLASHCURVE

IN-UNITS MET VOLUME-FLOW='cum/hr' ENTHALPY-FLO='Gcal/hr' &

HEAT-TRANS-C='kcal/hr-sqm-K' TEMPERATURE=C VOLUME=cum &

DELTA-T=C HEAD=meter MOLE-DENSITY='kmol/cum' &

MASS-DENSITY='kg/cum' MOLE-ENTHALP='kcal/mol' &

MASS-ENTHALP='kcal/kg' HEAT=Gcal MOLE-CONC='mol/l' &

PDROP=bar

MOLE-FLOW METHA-01 1 / WATER 1

STATE VFRAC=0.0

VARY PRES

RANGE LIST=1.

VARY MOLEFRAC COMP=METHA-01

RANGE LOWER=0.0 UPPER=1.0 NPOINT= 40

TABULATE PROPERTIES=PS-1

You might also like