Infantry T&R
Infantry T&R
Infantry T&R
44
C 469
16 Sep 08
NAVMC 3500.44
Subj: INFANTRY TRAINING AND READINESS MANUAL, (SHORT TITLE: INFANTRY T&R
MANUAL)
1. Purpose. Per reference (a), this T&R Manual establishes Core Capability
Mission Essential Tasks (MET) for readiness reporting and required events for
standardized training of Marines assigned to the Marine Corps infantry
battalion. Additionally, it provides tasking for formal schools preparing
personnel for service in the Marine Corps infantry community. This NAVMC
supersedes NAVMC DIR 3500.87.
2. Scope
a. The Core Capability Mission Essential Task List (METL) in this manual
is used in the Defense Readiness Reporting System (DRRS) by all infantry
battalions for the assessment and reporting of unit readiness. Units achieve
training readiness for reporting in DRRS by gaining and sustaining
proficiency in the training events in this manual at both collective (unit)
and individual levels.
M. G. SPIESE
By direction
2
NAVMC 3500.44
16 Sep 08
LOCATOR SHEET
Subj: INFANTRY TRAINING AND READINESS MANUAL, (SHORT TITLE: INFANTRY T&R
MANUAL)
Location: ____________________________________________________________
(Indicate location(s) of copy(ies) of this Manual.)
i
NAVMC 3500.44
16 Sep 08
RECORD OF CHANGES
ii
NAVMC 3500.44
16 Sep 08
TABLE OF CONTENTS
CHAPTER
1 . . . . . . . . . . . . . . . . . . . OVERVIEW
APPENDICES
B . . . . . . . . . . . . . . . . . . . REFERENCES
C . . . . . . . . . . . . . . . . . . . AMMUNITION ROLL-UP
D . . . . . . . . . . . . . . . . . . . SIMULATION
iii
NAVMC 3500.44
16 Sep 08
CHAPTER 1
OVERVIEW
PARAGRAPH PAGE
1-1
NAVMC 3500.44
16 Sep 08
CHAPTER 1
OVERVIEW
1001. INTRODUCTION
1. The T&R Program is the Corps’ primary tool for planning, conducting and
evaluating training, and assessing training readiness. Subject matter
experts (SMEs) from the operating forces developed core capability Mission
Essential Task Lists (METLs) for ground communities derived from the Marine
Corps Task List (MCTL). T&R manuals are built around these METLs and all
events contained in T&R manuals relate directly to this METL. This
comprehensive T&R Program will help to ensure the Marine Corps continues to
improve its combat readiness by training more efficiently and effectively.
Ultimately, this will enhance the Marine Corps’ ability to accomplish real-
world missions.
1-2
NAVMC 3500.44
16 Sep 08
training will support the METL in use by the commander and be tailored to
meet T&R standards. Commanders at all levels are responsible for effective
combat training. The conduct of training in a professional manner consistent
with Marine Corps standards cannot be over emphasized.
1-3
NAVMC 3500.44
16 Sep 08
1005. ORGANIZATION
1. T&R events are coded for ease of reference. Each event has a 4-4-4-digit
identifier. The first four digits are referred to as a “community” and
represent the unit type or occupation (INF, 0302, 0311, etc.). The second
four digits represent the functional or duty area (AMPH, FSPT, 60mm, etc.).
The last four digits represent the level and sequence of the event.
2. The T&R levels are illustrated in Figure 1. An example of the T&R coding
used in this Manual is shown in Figure 2.
1-4
NAVMC 3500.44
16 Sep 08
0311-DEF-2001
Rifleman core plus/1st event
Defense
1-5
NAVMC 3500.44
16 Sep 08
1. Unit-type T&R Manuals can contain numerous unit events, some for the
whole unit and others for integral parts that serve as building blocks for
training. To simplify training management and readiness assessment, only
collective events that are critical components of a mission essential task
(MET), or key indicators of a unit’s readiness, are used to generate CRP for
a MET. These critical or key events are designated in the T&R Manual as
Evaluation-Coded (E-Coded) events. Formal evaluation of unit performance in
these events is recommended because of their value in assessing combat
readiness. Only E-Coded events are used to calculate CRP for each MET.
3. Events selected for E-Coding in this T&R Manual were taken directly from
the Core METLs published for Infantry battalions, regiments, and regimental
headquarters companies. Those T&R events that are listed under the “Training
Standards” section of each individual MET have been E-Coded in this manual.
2. Unit CRP increases after the completion of E-Coded events. The number of
E-Coded events for the MET determines the value of each E-Coded event. For
example, if there are 4 E-Coded events for a MET, each is worth 25% of MET
CRP. MET CRP is calculated by adding the percentage of each completed and
current (within sustainment interval) E-Coded training event. The percentage
for each MET is calculated the same way and all are added together and
divided by the number of METS to determine unit CRP. For ease of
calculation, we will say that each MET has 4 E-Coded events, each
contributing 25% towards the completion of the MET. If the unit has
completed and is current on three of the four E-Coded events for a given MET,
then they have completed 75% of the MET. The CRP for each MET is added
together and divided by the number of METS to get unit CRP; unit CRP is the
average of MET CRP.
1-6
NAVMC 3500.44
16 Sep 08
For Example:
To get unit CRP, simply add the CRP for each MET and divide by the number of
METS:
Unit CRP: 325 (total MET CRP)/ 5 (total number of METS) = 65%
1. This section explains each of the components of a T&R event. These items
are included in all events in each T&R manual.
a. Event Code (see Sect 1006). The event code is a 4-4-4 character set.
For individual training events, the first 4 characters indicate the
occupational function. The second 4 characters indicate functional area
(AMPH, FSPT, COMM, etc.). The third 4 characters are simply a numerical
designator for the event.
d. Supported MET(s). List all METs that are supported by the training
event.
g. Grade. Each individual training event will list the rank(s) at which
Marines are required to learn and sustain the training event.
1-7
NAVMC 3500.44
16 Sep 08
l. Event Components. Describe the actions composing the event and help
the user determine what must be accomplished and to properly plan for the
event.
1-8
NAVMC 3500.44
16 Sep 08
•Range(s)/Training Area
•Ordnance
•Equipment
•Materials
•Other Units/Personnel
•Other Support Requirements
•Admin Instructions
•Special Personnel Certifications
•Equipment Operating Hours
•Road Miles
1-9
NAVMC 3500.44
16 Sep 08
1. ORM is a process that enables commanders to plan for and minimize risk
while still accomplishing the mission. It is a decision making tool used by
Marines at all levels to increase operational effectiveness by anticipating
hazards and reducing the potential for loss, thereby increasing the
probability of a successful mission. ORM minimizes risks to acceptable
levels, commensurate with mission accomplishment.
1-10
NAVMC 3500.44
16 Sep 08
3. Simulation codes have been added to each event in this T&R Manual and can
be found immediately following the training event title. The codes are as
follows:
A. Simulation must be used, whenever possible, in lieu of live
training when constraints prevent the physical actions of
accomplishing that task. The value of live fire training can never
be replaced.
B. Simulation programs are available that should be used as a
precursor to live training in order to help maximize and enhance
the live training event.
C. This task can be supported by self-paced, computer based training,
(i.e. MarineNet).
D. No simulation is available.
For example, the training event: INF-OFF-4710: Conduct a cordon and search
(B), recommends that simulation be used to supplement training prior to
field/live fire training takes place. This can be accomplished through the
used of several different forms of simulation to include the Deployable
Virtual Training Environment (DVTE), Close Combat Marines (CCM), Virtual
Battlefield System (VBS_), etc.
1. The Marine Corps Ground T&R Program continues to evolve. The vision for
Ground T&R Program is to publish a T&R Manual for every readiness-reporting
unit so that core capability METs are clearly defined with supporting
collective training standards, and to publish community-based T&R Manuals for
all occupational fields whose personnel augment other units to increase their
combat and/or logistic capabilities. The vision for this program includes
plans to provide a Marine Corps training management information system that
enables tracking of unit and individual training accomplishments by unit
commanders and small unit leaders, automatically computing CRP for both units
and individual Marines based upon MOS and rank (or billet). Linkage of T&R
Events to the Marine Corps Task List (MCTL), through the core capability
METs, has enabled objective assessment of training readiness in the DRRS.
1-11
NAVMC 3500.44
16 Sep 08
2. DRRS measures and reports on the readiness of military forces and the
supporting infrastructure to meet missions and goals assigned by the
Secretary of Defense. With unit CRP based on the unit’s training toward its
METs, the CRP will provide a more accurate picture of a unit’s readiness.
This will give fidelity to future funding requests and factor into the
allocation of resources. Additionally, the Ground T&R Program will help to
ensure training remains focused on mission accomplishment and that training
readiness reporting is tied to units’ METLs.
1-12
NAVMC 3500.44
16 Sep 08
CHAPTER 2
PARAGRAPH PAGE
2-1
NAVMC 3500.44
16 Sep 08
CHAPTER 2
1. The Infantry T&R Manual Mission Essential Task List (METL) Table includes
the designated MET number. The following event codes are the linked
collective events that support the MET.
5. Since many of the METs are duplicated the matrix below is consolidated
and reflects the appropriate supporting E-Coded Events for each MET.
2-2
NAVMC 3500.44
16 Sep 08
MET 3 - MCT 1.6.6 Conduct Military Operations Other Than War (MOOTW)
2-3
NAVMC 3500.44
16 Sep 08
CHAPTER 3
PARAGRAPH PAGE
3-1
NAVMC 3500.44
16 Sep 08
CHAPTER 3
3001. ADMINISTRATIVE NOTES. T&R events are coded for ease of reference.
Each event has a 4-4-4 digit identifier. The first four digits represent the
occupational field, "INF". The second four digits represent the functional
or duty area (e.g. Fire Support Planning (FSPT), Communications (COMM),
etc.). The last four digits represent the level, and identifier number of
the event. The regimental collective events are only in the 8000 level.
Every event has a unique identifier number from 001 to 999.
3-2
NAVMC 3500.44
16 Sep 08
Eval
Event Code Event Page
Code
COMMAND AND CONTROL
INF-C2-8001 Establish communications (B) 3-5
INF-C2-8002 YES Conduct command post operations (B) 3-5
Conduct Combat Operations Center (COC)
INF-C2-8003 3-6
Operations (B)
INF-C2-8004 Execute the orders process (D) 3-7
INF-C2-8005 Conduct planning (D) 3-8
INF-C2-8006 Conduct assessment (D) 3-9
Execute the Knowledge and Information Management
INF-C2-8007 3-9
(KIM) plan (D)
Integrate Marine Air Command and Control System
INF-C2-8008 3-10
(MACCS) support (DASC) (B)
MANEUVER
INF-MAN-8103 Control an area (B) 3-11
INF-MAN-8104 Conduct counter-IED (C-IED) operations (B) 3-11
INF-MAN-8108 Operate in urban terrain (B) 3-12
INF-MAN-8110 Conduct a relief in place (RIP) (B) 3-14
INF-MAN-8111 YES Conduct offensive operations (B) 3-15
INF-MAN-8116 Conduct mechanized/motorized operations (B) 3-16
Conduct helicopter/tilt-rotor borne operations
INF-MAN-8117 3-17
(B)
INF-MAN-8132 YES Conduct defensive operations (B) 3-18
INTELLIGENCE
INF-INT-8201 Conduct intelligence planning (D) 3-19
Conduct Joint Intelligence, Surveillance, and
INF-INT-8202 3-20
Reconnaissance (ISR) (B)
INF-INT-8203 Conduct intelligence operations (D) 3-21
FIRE SUPPORT
INF-FSPT-8301 YES Conduct fire support planning (D) 3-22
INF-FSPT-8302 YES Conduct fire support coordination (B) 3-23
INF-FSPT-8303 Conduct deliberate (D3A) targeting (D) 3-24
INF-FSPT-8304 Conduct dynamic targeting (B) 3-25
INF-FSPT-8305 Conduct information operations (B) 3-26
INF-FSPT-8306 Conduct joint fires (B) 3-26
COMBAT SERVICE SUPPORT
Conduct Force Deployment Planning and Execution
INF-CSS-8401 3-27
(FDP&E) planning (D)
INF-CSS-8402 Conduct logistics planning (D) 3-28
INF-CSS-8403 Conduct combat service support (B) 3-29
INF-CSS-8404 Conduct convoy operations (B) 3-30
FORCE PROTECTION
INF-FP-8501 Conduct force protection (B) 3-31
INF-FP-8502 Conduct CBRN-E operations (B) 3-32
STABILITY OPERATIONS
INF-STAB-8601 Conduct civil military operations (B) 3-33
INF-STAB-8602 Restore civil security (B) 3-33
INF-STAB-8603 Support the establishment of civil control (B) 3-34
INF-STAB-8604 Support the restoration of essential services 3-35
3-3
NAVMC 3500.44
16 Sep 08
(B)
INF-STAB-8605 Support local governance (B) 3-35
INF-STAB-8606 Support economic development (B) 3-36
INF-STAB-8607 Support post-conflict elections (B) 3-37
COUNTERINSURGENCY OPERATIONS
INF-COIN-8701 Clear an area of insurgents (B) 3-38
INF-COIN-8702 Hold an area cleared of insurgents (B) 3-39
INF-COIN-8703 Build local governance (B) 3-40
Implement population and resource control
INF-COIN-8704 3-41
measures (B)
Conduct counterinsurgency psychological
INF-COIN-8705 3-42
operations (B)
INF-COIN-8706 Conduct Attack the Network (AtN) operations (B) 3-42
FOREIGN INTERNAL DEFENSE
INF-FID-8801 Generate foreign security forces (B) 3-44
INF-FID-8802 YES Train foreign security forces (C) 3-45
INF-FID-8803 Advise foreign security forces (C) 3-47
EXPEDITIONARY OPERATIONS
INF-EXPO-8901 YES Conduct amphibious staff planning (D) 3-48
INF-EXPO-8902 YES Conduct amphibious operations (B) 3-49
Conduct maritime prepositioning force (MPF)
INF-EXPO-8903 3-50
operations (B)
Conduct Non-Combatant Evacuation Operations
INF-EXPO-8904 3-51
YES (NEO) (B)
JOINT, COMBINED AND INTERAGENCY OPERATIONS
Conduct joint/combined/interagency operations
INF-JCI-8001 3-52
(B)
TRAINING
INF-TRNG-8001 Conduct Training (D) 3-53
3-4
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Determine communication requirements (power, electronics, internetworking,
data, personnel, equipment and information support requirements) based on
mission analysis.
2. Develop an integrated Command and Control (C2) plan.
3. Prioritize and allocate communication and information support based on the
C2 plan.
4. Establish communication and information control procedures, to include
controlling communication nets and information networks, security
measures, restoration priorities and efforts, maintenance, and logistical
requirements.
5. Establish, operate and maintain data, video and voice networks with
higher, adjacent, subordinate and supporting (HASS) organizations.
6. Manage communication, electronic, and information systems to allow for the
effective command and control and continuity of operations during all
operational phases at all echelons (Forward, Main, Rear).
7. Employ electronic counter measures as required.
8. Maintain communication status reports, supporting Higher, Adjacent,
Subordinate, Supporting (HASS) requirements in accordance with
capabilities.
RELATED EVENTS:
INF-CSS-8404 INF-COMM-7201
REFERENCES:
1. DCOCSOP Digital COC SOP for Battalion Operations in Irregular Warfare
2. MCDP 6 Command and Control
3. MCWP 3-1 Ground Combat Operations
SUPPORTED MET(S): 1, 2, 3, 4, 6
3-5
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Organize the staff and establish command post echelons (Forward, Main,
Rear) and communications to support mission accomplishment.
2. Conduct Fire Support Coordination within the Combat Operation Center.
3. Incorporate the Intelligence Operations Center within the CP.
4. Incorporate the Administrative and Logistical Operations Center within the
CP.
5. Incorporate the Surveillance and Reconnaissance Center within the CP.
6. Incorporate the Combat Operations Center within the CP.
7. Establish the command post to incorporate joint, interagency and coalition
attachments into the Combat Operation Center.
8. Implement procedures for reconnaissance, selection, and occupation of
positions.
9. Implement procedures to conduct movement.
10. Direct the security and organization of the command post area.
11. Maintain communications with higher, adjacent and supporting units.
12. Develop and disseminate orders.
13. Conduct information management.
14. Assess operations.
15. Establish a battle rhythm.
16. Transition control of operations to the appropriate echelon.
17. Displace the command post.
18. Maintain continuity of operations.
REFERENCES:
1. DCOCSOP Digital COC SOP for Battalion Operations in Irregular Warfare
2. FM 3-0 Operations
3. FMI 5-0.1 The Operations Process
4. MCDP 1-0 Marine Corps Operations
5. MCWP 3-1 Ground Combat Operations
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Establish a COC with communications and C2 systems/applications that
support the required Command Post echelon (Forward, Main, and Rear).
3-6
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 3-0 Operations
2. FMI 5-0.1 The Operations Process
3. MCDP 1-0 Marine Corps Operations
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Recommended training includes SharePoint End User Course, WO/WC Course,
C2PC Leader's Course, BFT Leader's Course, CPoF Leader's Course, BAT
Leader's Course.
2. Must know collaborative tools (web-based tools) used by your unit.
Collaborative tools are identified by the IMO.
3. C2 system training is available via home-station training at the local
MAGTF Integrated Systems Training Center (MISTC).
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Receive HHQ order, Commanders Battlespace Area Evaluation (CBAE), and
commander’s guidance.
2. Determine planning timeline, associated planning methodology, and required
orders products.
3. Issue warning orders.
4. Conduct staff planning and synchronization.
5. Coordinate operations and required support with higher, adjacent,
3-7
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FMI 5-0.1 The Operations Process
2. MCRP 3-11.1A Commander's Tactical Handbook
3. MCRP 5-12A Operational Terms and Graphics
4. MCWP 3-1 Ground Combat Operations
5. MCWP 3-40.1 Marine Air-Ground Task Force Command and Control
6. MCWP 5-1 Marine Corps Planning Process
SUPPORTED MET(S): 1, 2, 3, 4, 5, 6
STANDARD: To produce plans and orders which support the accomplishment of the
mission and commander's intent.
EVENT COMPONENTS:
1. Establish timeline for planning and preparation.
2. Determine planning process (Campaign, MCPP, R2P2, Hasty Planning, or
Adjustment Decision Planning Process (ADPP)).
3. Conduct MCPP, R2P2, Hasty Planning or ADPP.
4. Integrate red cell into planning.
5. Integrate and synchronize warfighting functions.
6. Conduct Confirmation Brief.
7. Develop appropriate staff products, operations plans, orders, annexes, and
appendices.
8. Conduct rehearsals.
9. Modify plan as required.
10. Issue order.
11. Execute transition.
REFERENCES:
1. FMI 5-0.1 The Operations Process
2. MCWP 3-40.1 Marine Air-Ground Task Force Command and Control
3. MCWP 5-1 Marine Corps Planning Process
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Performance steps are derived from task 0502-PLAN-1016. See MAGTF
Plans Officer T&R Manual for additional information.
3-8
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1, 2, 3, 4, 5, 6
EVENT COMPONENTS:
1. Establish an assessment working group.
2. Identify baseline conditions.
3. Determine metrics.
4. Develop Measures of Effectiveness (MOE).
5. Develop Measures of Performance (MOP).
6. Determine method of collecting, reporting, and tracking MOE/P.
7. Integrate assessment activities into the Battle Rhythm.
8. Conduct assessment throughout planning, preparation and execution of an
operation.
9. Modify MOE and MOP as required based on commanders guidance and staff
input.
REFERENCES:
1. FMI 5-0.1 The Operations Process
2. MCDP 6 Command and Control
3. MCWP 3-40.1 Marine Air-Ground Task Force Command and Control
4. MCWP 5-1 Marine Corps Planning Process
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Performance steps are derived from task 0502-ASSE-1016. See MAGTF Plans
Officer T&R Manual for additional information.
2. Assessment does not end; it is a continuous activity that is run
throughout each operational framework (planning, preparation, execution).
INF-C2-8007: Execute the Knowledge and Information Management (KIM) plan (D)
SUPPORTED MET(S): 1, 2, 3, 4, 6
3-9
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Identify Information Exchange Requirements (IERs) for the staff and
commander of each echelon in the command.
2. Identify IER C4ISR support requirements.
3. Develop a Knowledge and Information Management Plan (KIMP).
4. Implement the Knowledge and Information Management Plan.
5. Assess the effectiveness of the information and knowledge management plan
in support of the staff and commander's IERs and the ability of the staff
to create situational awareness for the commander.
6. Modify the plan as required to best support the staff and commander with
the goal of accelerating the commander's ability to make decisions faster
than his enemy.
REFERENCES:
1. FM 3-0 Operations
2. FMI 5-0.1 The Operations Process
3. MCDP 1-0 Marine Corps Operations
4. MCWP 3-1 Ground Combat Operations
5. MCWP 3-40.2 MAGTF Information Management
SUPPORT REQUIREMENTS:
INF-C2-8008: Integrate Marine Air Command and Control System (MACCS) support
(DASC) (B)
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Identify the organization, capabilities, employment procedures, and
support requirements of the DASC.
2. Identify requirements for DASC support to ground combat operations.
3. Integrate DASC capabilities into ground combat operations.
4. Receive and integrate DASC attachments into the GCE.
REFERENCES:
1. JP 3-52 JOINT DOCTRINE FOR AIRSPACE CONTROL IN A COMBAT ZONE
2. MCWP 3-1 Ground Combat Operations
3. MCWP 3-2 Aviation Operations
4. MCWP 3-25 Control of Aircraft and Missiles
5. MCWP 3-25.2 Multi-service Procedures for the Theater Air-Ground System
3-10
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1, 2, 6
EVENT COMPONENTS:
1. Conduct command and control.
2. Conduct ISR.
3. Conduct shaping operations.
4. Conduct combat service support.
5. Protect the force.
6. Secure key terrain, infrastructure and individuals.
7. Organize the battlespace.
8. Develop and execute the fire support plan.
9. Provide response forces.
10. Employ Active and Passive security measures.
11. Conduct targeting.
12. Conduct information operations.
13. Conduct civil military operations.
14. Implement population and resource control measures.
REFERENCES:
1. MCDP 1-0 Marine Corps Operations
2. MCWP 3-1 Ground Combat Operations
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This encompasses rear area security, MSR security, and controlling
critical battlespaces.
SUPPORTED MET(S): 1, 2, 6
3-11
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Establish a C-IED working group.
2. Establish Electronic Warfare Coordination Cell (EWCC).
3. Identify threat IED capabilities and TTPs.
4. Conduct pattern analysis on the IED threat.
5. Analyze threat IED TTPs.
6. Conduct ISR in high threat areas to detect emplacers.
7. Conduct IO and CMO to garner popular support to assist in IED reporting.
8. Integrate enablers into C-IED efforts (See Note 2).
9. Integrate host nation security forces into C-IED efforts.
10. Coordinate electronic protection requirements.
11. Conduct route clearance operations.
12. Develop and maintain route status reports.
13. Conduct route security patrols and establish overwatch positions to detect
and deter IED threats.
14. Develop countermeasures (TTPs) to mitigate the IED threat.
15. Conduct post-blast analysis / exploitation.
16. Synchronize C-IED reporting and dissemination.
RELATED EVENTS:
INF-MAN-7104 INF-COIN-8706 INF-COIN-7706
REFERENCES:
1. FM 2-0 Intelligence
2. MCDP 1-0 Marine Corps Operations
3. MCRP 2-3A Intelligence Preparation of the Battlefield
4. MCWP 3-1 Ground Combat Operations
5. MCWP 3-33.5 Counterinsurgency Operations
6. MCWP 5-1 Marine Corps Planning Process
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Principles of C-IED (System Defeat) are the following: Predict,
Prevent, Detect, Neutralize, Mitigate, Effects.
2. C-IED enablers include: (EOD, Combined Explosive Exploitation Cells
(CEXC), Weapons Intelligence Teams (WIT), C-IED Targeting Program Cells
(CITP), C-IED Operations Integration Center (COIC), Operations Research
Systems Analyst Team (ORSAT), Electronic Warfare Officer/Electronic Counter
Measures (EWO/ECM), FOX Team, Route Clearance and Sensitive Site
Exploitation Teams, MWD (Explosive Detector/Specialized Search/Combat
Tracker).
SUPPORTED MET(S): 6
3-12
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Conduct intelligence preparation of the operating environment (IPOE).
2. Assess demographics/population/cultural factors.
3. Conduct integrated planning with higher, adjacent, subordinate and
supporting elements.
4. Identify maneuver requirements to support urban operations.
5. Identify logistics requirements to support urban operations.
6. Identify communications requirements to support urban operations.
7. Identify fire support requirements to support urban operations.
8. Identify and request external support requirements (SMEs, LNOs, Forces).
9. Develop fire support plan, tactical control measures, routes and urban
specific factors and restrictions.
10. Conduct, coordinate, and complete the fire support/targeting process.
11. Establish command and control.
12. Establish population and resource control measures.
13. Disseminate rules of engagement (ROE) and incorporate into planning.
14. Task organize for urban operations.
15. Conduct rehearsals.
16. Conduct intelligence, surveillance and reconnaissance (ISR).
17. Conduct shaping.
18. Isolate the objective.
19. Conduct civil military operations.
20. Control, direct, coordinate, approve, modify or deny employment of organic
and supporting arms.
21. Gain a foothold in limited objectives.
22. Seize key terrain.
23. Conduct clearing operations.
24. Complete actions on the objective.
25. Evacuate casualties, process detainees, and conduct logistics operations.
26. Prepare for follow-on missions.
27. Conduct continuous engagement/interaction with locals to support
operations and gain actionable intelligence.
RELATED EVENTS:
INF-MOUT-7801
REFERENCES:
1. FM 90-10-1 Infantryman's Guide to Combat in Built-Up Areas
2. MCDP 1-0 Marine Corps Operations
3. MCDP 1-3 Tactics
4. MCWP 3-1 Ground Combat Operations
5. MCWP 3-11.4 Helicopterborne Operations
6. MCWP 3-12 Marine Corps Tank Employment
7. MCWP 3-13 Employment of Amphibious Assault Vehicles (AAVs)
8. MCWP 3-15.5 Antiarmor Operations
9. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
10. MCWP 3-17.3 MAGTF Breaching Operations
11. MCWP 3-31.5 Ship-to-Shore Movement
12. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
SUPPORT REQUIREMENTS:
3-13
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17963 MOUT Collective Training Facility (Large)
SUPPORTED MET(S): 2
EVENT COMPONENTS:
1. Establish turnover checklists.
2. Establish liaison personnel.
3. Exchange all required intelligence and tactical information.
4. Establish battle rhythm and synchronize all functions to include incoming
billets or units.
5. Maintain positive communications (data and voice throughout the relief.
6. Displace a command post (CP) to coordinate the relief.
7. Conduct the movement of units, based on the planned construct.
8. Use coordination measures effectively to transition units.
9. Coordinate / identify when and where battle handover / passage of command
will occur.
10. Determine phasing of command relationships.
11. Conduct detailed coordination and liaison encompassing all warfighting
functions with subordinate and higher units.
12. Establish coordination measures to transition incoming units.
13. Refine SOP and lessons learned for incoming unit to incorporate into SOP.
14. Account for all personnel, supplies, and equipment.
15. Coordinate the transfer or exchange of supplies and equipment.
16. Keep fire support assets in position throughout the relief of maneuver
units. Ensure they are prepared to support both units.
17. Utilize assembly areas that provide cover and concealment and are large
enough to allow for the dispersion of units.
18. Maintain all-round security throughout the entire relief units.
19. Employ Electronic Warfare (EW) to reduce the enemy's C3 capabilities.
20. Respond to enemy actions according to the responsible units SOP.
21. Execute tactical deception during the relief.
22. Relinquish responsibility for the area upon the transfer of authority.
RELATED EVENTS:
INF-MAN-7110
REFERENCES:
1. MCDP 1-0 Marine Corps Operations
2. MCDP 1-3 Tactics
3. MCWP 3-1 Ground Combat Operations
4. MCWP 3-11.4 Helicopterborne Operations
5. MCWP 3-12 Marine Corps Tank Employment
3-14
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
SUPPORTED MET(S): 1
STANDARD: To destroy, defeat enemy forces, seize and secure objectives while
achieving the commander's intent.
EVENT COMPONENTS:
1. Exercise command and control.
2. Protect the force.
3. Conduct ISR.
4. Conduct shaping operations in support of the attack.
5. Synchronize maneuver with direct and indirect fires.
6. Conduct decisive operations in support of the attack.
7. Bypass or rapidly breach obstacles encountered enroute to the objective.
8. Conduct exploitation of objective area.
9. Conduct combat service support.
10. Consolidate and re-organize when the mission is complete.
11. Conduct exploitation.
12. Conduct pursuit.
RELATED EVENTS:
INF-MAN-7111
REFERENCES:
1. MCDP 1-0 Marine Corps Operations
2. MCDP 1-3 Tactics
3. MCWP 3-1 Ground Combat Operations
4. MCWP 3-11.4 Helicopterborne Operations
5. MCWP 3-12 Marine Corps Tank Employment
6. MCWP 3-13 Employment of Amphibious Assault Vehicles (AAVs)
7. MCWP 3-15.5 Antiarmor Operations
8. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
9. MCWP 3-17.3 MAGTF Breaching Operations
10. MCWP 3-31.5 Ship-to-Shore Movement
11. NAVMC 3500.36A Operations and Tactics Instructor Training and Readiness
Manual (OTI T&R)
3-15
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task is broad in nature and is designed to encompass the
requirements for various types of attacks to include: raids, night,
motorized, tank-infantry, mechanized, etc.
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct intelligence preparation of the operating environment (IPOE).
2. Conduct planning.
3. Identify bridging and breaching requirements, capabilities and
limitations.
4. Identify routes and mobility corridors.
5. Identify anti-armor threats.
6. Identify logistics requirements to support mobile operations.
7. Identify communications requirements to support extended range operations.
8. Identify fire support requirement to support mobile operations.
9. Integrate Tank Bn, AA Bn, LAR Bn, CEB Bn, Arty Bn capabilities into
regimental operations.
10. Establish command and control
11. Task organize and allocate assets.
12. Conduct intelligence, surveillance and reconnaissance (ISR).
13. Conduct rehearsals.
14. Conduct breaching operations.
15. Conduct bridging operations.
3-16
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-MAN-7116 INF-MAN-7115 INF-MAN-7114
REFERENCES:
1. MCDP 1-0 Marine Corps Operations
2. MCDP 1-3 Tactics
3. MCWP 3-1 Ground Combat Operations
4. MCWP 3-11.4 Helicopterborne Operations
5. MCWP 3-12 Marine Corps Tank Employment
6. MCWP 3-13 Employment of Amphibious Assault Vehicles (AAVs)
7. MCWP 3-15.5 Antiarmor Operations
8. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
9. MCWP 3-17.3 MAGTF Breaching Operations
10. MCWP 3-31.5 Ship-to-Shore Movement
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct intelligence preparation of the operating environment (IPOE) to
gain information on routes of ingress/egress, landing sites, obstacles,
enemy positions and anti-aircraft defense.
2. Conduct intelligence, surveillance and reconnaissance (ISR).
3. Conduct integrated planning with aviation, naval and joint planners (if
applicable).
4. Establish command and control.
5. Request and coordinate aviation and fire support.
6. Task organize.
3-17
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-MAN-7117
REFERENCES:
1. MCWP 3-11.4 Helicopterborne Operations
2. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
3. MCWP 3-31.5 Ship-to-Shore Movement
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
SUPPORTED MET(S): 2
3-18
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Conduct command and control.
2. Conduct ISR.
3. Conduct counter reconnaissance.
4. Conduct shaping operations.
5. Conduct combat service support.
6. Protect the force.
7. Select terrain and organize the defense.
8. Develop and execute the fire support plan.
9. Develop and execute the obstacle plan.
10. Organize the reserve.
11. Conduct rehearsal to include commitment of the reserve.
12. Conduct active and passive security measure.
13. Transition to the offense.
RELATED EVENTS:
INF-MAN-7132
REFERENCES:
1. MCDP 1-0 Marine Corps Operations
2. MCDP 1-3 Tactics
3. MCWP 3-1 Ground Combat Operations
4. MCWP 3-11.4 Helicopterborne Operations
5. MCWP 3-12 Marine Corps Tank Employment
6. MCWP 3-13 Employment of Amphibious Assault Vehicles (AAVs)
7. MCWP 3-15.5 Antiarmor Operations
8. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
9. MCWP 3-17.3 MAGTF Breaching Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17560 Sniper Field-Fire Range
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17610 Grenade Launcher Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17830 Light Demolition Range
Facility Code 17905 Mine Warfare Area
Facility Code 17936 Close Air Support Range
SUPPORTED MET(S): 1, 2, 3, 4, 6
3-19
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Identify enemy MD/MLCOA.
2. Identify indications and warnings (I&W) of MD/MLCOA.
3. Identify intelligence requirements.
4. Designate PIRs based on commander's guidance.
5. Designate SIRs based on PIRs.
6. Designate NAIs based on SIRs.
7. Develop a collection plan based on NAIs.
8. Use a systematic method to manage the collection effort.
9. Coordinate with collection agencies.
10. Use all organic collection assets and request collection support as
required.
11. Brief and debrief collection plan and requirements per unit SOP and
operation order.
12. Coordinate with higher headquarters G-3/G-2 on all collection tasking and
the unit's requirement for maps, charts, terrain models, aerial imagery,
and other graphic aids.
13. Monitor I&W.
14. Analyze adversary activity.
15. Update assessments of adversary capabilities, vulnerabilities, COGs,
intentions and possible COAs.
16. Use intelligence products and considerations in support of the targeting
process.
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. JP 2-01 Joint Intelligence Support to Military Operations
3. MCWP 2-1 Intelligence Operations
4. MCWP 2-2 MAGTF Intelligence Collections
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Identify Joint ISR request process.
2. Identify available Joint ISR assets/capabilities.
3-20
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. JP 2-01 Joint Intelligence Support to Military Operations
2. MCWP 2-1 Intelligence Operations
3. MCWP 2-2 MAGTF Intelligence Collections
4. NAVMC DIR 3500.101 Intelligence Training and Readiness Manual
SUPPORT REQUIREMENTS:
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Organize the S-2 into command post echelons (Forward, Main, Rear) to
support mission accomplishment.
2. Establish an Intelligence Operations Center (IOC).
3. Integrate non-organic intelligence assets (HET, RadBn, Joint ISR, OGA).
4. Conduct intelligence planning.
5. Analyze intelligence.
6. Produce intelligence products.
7. Disseminate intelligence.
8. Operate intelligence systems and applications.
9. Manage intelligence databases.
10. Conduct intelligence reporting.
11. Supervise the execution of the collection plan.
12. Support the targeting process.
13. Evaluate the threat.
14. Monitor and update I&W / PIR.
15. Synchronize the tactical intelligence efforts for subordinate units.
RELATED EVENTS:
INF-INT-7203 INF-INT-8201
3-21
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCWP 2-1 Intelligence Operations
2. MCWP 2-2 MAGTF Intelligence Collections
3. NAVMC DIR 3500.101 Intelligence Training and Readiness Manual
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Review available intelligence and assess current situation.
2. Identify available fire support assets.
3. Determine desired effects (i.e., suppress, neutralize, or destroy).
4. Develop Essential Fires Support Tasks (EFSTs).
5. Develop Attack Guidance Matrix (AGM).
6. Develop fire support plan in concert with the scheme of maneuver.
7. Employ ISR to support fire support planning.
8. Determine priorities of fires, allocation of assets, positioning of
units/agencies.
9. Identify priority targets and make plans to shift as the operation
progresses.
10. Establish fire support coordination measures (FSCMs).
11. Coordinate the establishment of aviation control measures (ACMs).
12. Identify ammunition and target restrictions.
13. Identify Rules of Engagement (ROE) restrictions.
14. Conduct Targeting Board.
15. Conduct weaponeering and collateral damage estimates (CDE).
16. Submit overall fire support requirements for NSFS and artillery to
appropriate agencies in a timely manner.
17. Plan for the displacement of the FSC.
18. Plan for the transition of fires control.
19. Coordinate for the use of airspace.
20. Coordinate and integrate subordinate elements fire support plans.
21. Prepare a fire support overlay.
22. Publish the regimental fire support plan.
REFERENCES:
1. JOINT PUB 3-02.1 Landing Force Operations
2. JP 3-09 Joint Tactics, Techniques, and Procedures for Close Air Support
3. MCRP 3-15.2A Mortars
4. MCRP 3-16.1A Tactics, Techniques and Procedures for Field Artillery Target
Acquisition
5. MCRP 3-16.6A J-Fire, Multiservice Procedures for the Joint Application of
Fire Power
3-22
NAVMC 3500.44
16 Sep 08
6. MCRP 3-16C Tactics, Techniques, and Procedures for Fire Support for the
Combined Arms Commander
7. MCWP 2-1 Intelligence Operations
8. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
SUPPORTED MET(S): 1, 2
EVENT COMPONENTS:
1. Establish the FSCC and fire support communications architecture.
2. Assume responsibility for the control of fires within assigned AO.
3. Maintain the fires portion of the common operating picture (COP).
4. Activate and deactivate fire support coordination measures.
5. Disseminate all FSCMs to subordinate, higher and adjacent units.
6. Approve, modify or deny requests for fire support based on desired effects
and guidance.
7. Deconflict and integrate air and surface delivered fires using either
formal or informal airspace coordination measures.
8. Conduct cross boundary coordination with adjacent or higher units' Fire
Support Coordination Center (FSCC).
9. Execute the fire support plan.
10. Employ ISR in support of the fire support plan.
11. Manage the flow of information in the Fire Support Coordination Center
(FSCC) so critical information is exchanged in a timely manner.
12. Adjust the schedule of fires based on the advance of maneuver units,
changes in priorities (Priorities of Fire and Priority Targets), and any
changes to the scheme of maneuver.
13. Respond quickly to high payoff targets and immediate fire support
requests.
14. Coordinate the movement of ground based fire support.
15. Maintain the status of remaining air sorties allocated, aircraft on call,
and all preplanned air missions.
16. Request additional fire support, if required.
17. Maintain a record of targets fired on, Battle Damage Assessment (BDA), and
targets not engaged.
18. Displace the FSCC by echelon while maintaining continuity of operations
and control of fires.
19. Anticipate close air support (CAS) requirements, and coordinate the
assignment of air alert status.
RELATED EVENTS:
INF-FSPT-7302
3-23
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. JOINT PUB 3-02.1 Landing Force Operations
2. JP 3-09 Joint Tactics, Techniques, and Procedures for Close Air Support
3. MCRP 3-15.2A Mortars
4. MCRP 3-16.1A Tactics, Techniques and Procedures for Field Artillery Target
Acquisition
5. MCRP 3-16.6A J-Fire, Multiservice Procedures for the Joint Application of
Fire Power
6. MCRP 3-16C Tactics, Techniques, and Procedures for Fire Support for the
Combined Arms Commander
7. MCWP 2-1 Intelligence Operations
8. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17430 Impact Area Dudded
Facility Code 17610 Grenade Launcher Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
SUPPORTED MET(S): 1, 2, 4, 6
STANDARD: To select and prioritize targets and match the appropriate response
in support of the scheme of maneuver/concept of operations to achieve the
commander's intent.
EVENT COMPONENTS:
1. Conduct Target Value Analysis (TVA).
2. Identify High Value Targets (HVT).
3. Identify High-Payoff Targets (HPT).
4. Develop a High-Payoff Targets List (HPTL).
3-24
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCRP 3-16.1A Tactics, Techniques and Procedures for Field Artillery Target
Acquisition
SUPPORTED MET(S): 1, 2, 4, 6
EVENT COMPONENTS:
1. Conduct Target Value Analysis (TVA).
2. Identify High Value Targets (HVT).
3. Identify High-Payoff Targets (HPT).
4. Develop a High-Payoff Targets List (HPTL).
5. Lead or participate in a target board.
6. Determine commander's objective, guidance, and intent.
7. Conduct target development, validation, nomination, and prioritization.
8. Conduct Effects-Based Targeting.
9. Develop Measures of Effectiveness (MOEs).
10. Identify unplanned immediate targets.
11. Identify unanticipated immediate targets.
12. Conduct collateral damage evaluation.
13. Conduct weaponeering.
14. Respond to unplanned immediate targets.
15. Respond to unanticipated immediate targets.
16. Conduct combat assessment.
17. Make re-attack recommendations.
3-25
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCRP 3-16.1A Tactics, Techniques and Procedures for Field Artillery Target
Acquisition
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Conduct Information Operations (IO) Battlespace Shaping.
2. Conduct Deception Operations.
3. Conduct Electronic Attack (EA).
4. Conduct Electronic Protection (EP).
5. Conduct Electronic Support (ES).
6. Conduct Psychological Operations (PSYOPS).
7. Conduct Operations Security (OPSEC).
8. Coordinate Computer Network Operations (CNO).
9. Conduct Information Assurance (IA).
10. Conduct Information Operations (IO) Physical Security.
11. Conduct Public Affairs Operations.
REFERENCES:
1. DOD Directive 3600.1 Information Operations
2. DoD IO Roadmap
3. FM 3-13 Information Operations: Doctrine, Tactics, Techniques, and
Procedures
4. JP 1-02 DOD Dictionary of Military and Associated Terms
5. JP 3-13 Joint Doctrine for Information Operations
6. MCWP 3-40.4 MAGTF Information Operations
SUPPORTED MET(S): 1, 2, 3, 4, 6
3-26
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Conduct target development, validation, nomination, and prioritization.
2. Identify availability, capabilities and limitations of GCE, MAGTF, joint
and combined fire support assets.
3. Integrate planning with the Joint Targeting Cycle.
4. Integrate planning with the Joint Air Tasking Order Cycle.
5. Nominate targets for attack by Joint Fires.
6. Nominate Time-Sensitive Targets (TST) for attack by appropriate Fire
Support assets.
7. Nominate Targets for Submission to the Joint Integrated Prioritized Target
List (JIPTL).
8. In collaboration with joint organizations, develop fire support
coordination measures to integrate joint fires into the battlespace.
9. Conduct fire support coordination of joint assets.
10. Conduct combat assessment.
11. Nominate targets for re-attack based on Combat Assessment.
REFERENCES:
1. FM 3-52.2 Multi-Service Tactics, Techniques, and Procedures for the
Theater Air Ground System (TAGS)
2. JP 3-09 Joint Tactics, Techniques, and Procedures for Close Air Support
3. JP 3-09.3 Control of Aircraft and Missile Joint Tactics, Techniques and
Procedures for Close Air Support
4. JP 3-60 Joint Doctrine for Targeting
5. MCRP 3-16D Multi-Service TTP for Targeting Time-Sensitive Targets
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Joint fire support includes Army, Navy, Air Force and Marine Corps
artillery, rocket, missile, naval surface fire support (NSFS) systems, fix
and rotary-wing aircraft. Identify and select operational level targets
that might impact the GCE's ability to support the JFC's campaign and
conduct major operations. The GCE requests support from joint and other
components to address requirements beyond the capabilities of its organic
fire support.
SUPPORTED MET(S): 5
EVENT COMPONENTS:
1. Review the concept of operations/operations plan to determine specific
transportation requirements.
2. Identify TPFDD requirements to higher headquarters.
3-27
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. AMC PAM 36-1 AMC Affiliating Program Airlift Planner's Course
2. JOINT PUB 3-02.2 Joint Doctrine for Amphibious Embarkation
3. JP 3-02 Joint Doctrine for Amphibious Operations
4. MCO 4630.6 Military Airlift Command Requirement
5. MCO P4450.12 Storage and Handling of Hazardous Materials
6. MCO P4600.7_ USMC Transportation Manual
7. MCO P5090.2A Environmental Compliance and Protection Manual (Jul 98)
SUPPORTED MET(S): 1, 2, 3, 4, 5, 6
EVENT COMPONENTS:
1. Identify unit on hand MTOE strengths.
2. Identify organic capabilities.
3. Coordinate transportation requirements.
4. Coordinate maintenance requirements.
5. Coordinate engineering requirements.
6. Coordinate supply requirements.
7. Coordinate services required.
8. Coordinate medical requirements.
9. Coordinate detainee operations requirements.
10. Coordinate external support.
11. Identify support relationships.
12. Prepare concept of support.
13. Determine priority of support.
14. Develop logistics tracking process.
15. Assign tasks to subordinate supporting elements.
16. Monitor contingency fund allocation and spending.
17. Identify contracting requirements.
18. Identify Logistics Civilian Augmentation Program (LOGCAP).
19. Support the establishment of a Forward Operating Base (FOB).
20. Identify critical shortfalls.
3-28
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. JOINT PUB 3-02.2 Joint Doctrine for Amphibious Embarkation
2. MCDP 4 Logistics
3. MCO 8010.1 Class V(W) SUP FMF CBT OP
4. MCO P4400.150E Consumer-Level Supply Policy Manual (Jun 99)
5. MCO P4790.2_ MIMMS Field Procedures Manual
6. MCO P5090.2A Environmental Compliance and Protection Manual (Jul 98)
7. MCO P8020.10A Marine Corps Ammunition Management and Explosives Safety
Policy
8. MCRP 5-12A Operational Terms and Graphics
9. MCWP 3-17 Engineer Operations
10. MCWP 3-21.1 Aviation Ground Support
11. MCWP 3-31.5 Ship-to-Shore Movement
12. MCWP 3-32 Maritime Pre-positioning Force (MPF) Operations
13. MCWP 3-40.1 Marine Air-Ground Task Force Command and Control
14. MCWP 4-1 Logistics Operations
15. MCWP 4-11.3 Transportation Operations
16. MCWP 4-11.4 Maintenance Operations
17. MCWP 4-11.6 Bulk Liquid Operations
18. MCWP 4-11.7 MAGTF Supply Operations
19. MCWP 4-11.8 Services in an Expeditionary Environment
20. MCWP 5-1 Marine Corps Planning Process
21. NATICK PAM 30-25 Operational Rations
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Establish Admin & Logistics Operations Center (ALOC).
2. Establish a Regimental Aid Station (RAS).
3. Manage logistics inputs to the common operational picture.
4. Direct staff CSS actions.
5. Direct the functions of the combat trains, field trains and LOGPACs.
6. Coordinate external logistics support.
7. Supervise logistics mission status.
8. Analyze logistics status reports.
9. Process CSS requests.
10. Adjust logistics resources prioritization.
11. Operate a Unit Movement Control Center (UMCC).
12. Track CASEVAC missions and casualties.
13. Conduct personnel management and reporting.
14. Coordinate transportation requirements.
15. Coordinate maintenance requirements.
16. Coordinate engineering requirements.
3-29
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-CSS-7403
REFERENCES:
1. JP 0-2 Unified Action Armed Forces (UNAAF)
2. JP 3-02 Joint Doctrine for Amphibious Operations
3. MCDP 4 Logistics
4. MCO 8010.1 Class V(W) SUP FMF CBT OP
5. MCO P4400.150E Consumer-Level Supply Policy Manual (Jun 99)
6. MCO P4790.2_ MIMMS Field Procedures Manual
7. MCO P5090.2A Environmental Compliance and Protection Manual (Jul 98)
8. MCRP 5-12A Operational Terms and Graphics
9. MCWP 3-17 Engineer Operations
10. MCWP 3-21.1 Aviation Ground Support
11. MCWP 3-31.5 Ship-to-Shore Movement
12. MCWP 3-32 Maritime Pre-positioning Force (MPF) Operations
13. MCWP 3-40.1 Marine Air-Ground Task Force Command and Control
14. MCWP 4-1 Logistics Operations
15. MCWP 4-11 Tactical Level Logistics
16. MCWP 4-11.1 Health Service Support Operations
17. MCWP 4-11.3 Transportation Operations
18. MCWP 4-11.4 Maintenance Operations
19. MCWP 4-11.6 Bulk Liquid Operations
20. MCWP 4-11.7 MAGTF Supply Operations
21. MCWP 4-11.8 Services in an Expeditionary Environment
22. MCWP 5-1 Marine Corps Planning Process
23. NATICK PAM 30-25 Operational Rations
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Coordinate convoy operations through the Unit Movement Control Center
(UMCC).
2. Develop communications plan to support convoy movements.
3-30
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-PAT-7145 INF-MOBL-6150 INF-CSS-7404
REFERENCES:
1. MCRP 4-11.3H Multi-service Tactics, Techniques, and Procedures for
Tactical Convoy Operations
SUPPORTED MET(S): 1, 2, 3, 4, 5, 6
EVENT COMPONENTS:
1. Integrate Force Protection assessments and planning considerations into
the planning process.
2. Conduct a threat assessment, vulnerability assessment, and risk assessment
for the AT/FP Plan.
3. Conduct pre-deployment training and AOR briefings for personnel traveling
in support of unit deployments.
4. Develop command information programs to ensure unit personnel are informed
of FPCON levels.
5. Develop coordinated terrorist incident response and consequence management
measures (Emergency Action Plan, (EAP)).
6. Develop procedures to collect and analyze current terrorist threat
information, threat capabilities, and vulnerabilities.
7. Develop unit specific random antiterrorism measures (RAMs).
8. Ensure site specific AT measures identify and address special security
areas.
9. Identify high-risk personnel/billets for the unit and develop appropriate
security measures.
10. Publish escalation of force and rules of engagement policies.
11. Coordinate logistical support for the force protection plan.
12. Coordinate with host nation/local authorities as required.
13. Establish air defense measures.
3-31
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. JP 3-07.2 JTTP for Anti-terrorism
2. MCDP 1-0 Marine Corps Operations
3. MCWP 2-6 Counterintelligence
4. MCWP 3-40.1 Marine Air-Ground Task Force Command and Control
5. MCWP 3-40.3 Communications and Information Systems
6. MCWP 5-1 Marine Corps Planning Process
7. NAVMC 2927 Antiterrorism/Force Protection Campaign Plan
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Conduct CBRN-E threat analysis: assess threat capability and intentions
for use of CBRN-E.
2. Plan for alternate command posts and routes in the event of a CBRN-E
incident.
3. Plan for tracking and handling of CBRN-E casualties and contaminated
equipment.
4. Prepare CBRN-E Defense / Consequence Management plan.
5. Plan for CBRN-E logistics to include CBRN-E defense equipment, medical
supplies, decontamination supplies.
6. Plan for security of incident site until returned to pre-incident status.
7. Conduct CBRN-E warning and reporting.
8. Conduct hazard prediction with METOC.
9. Conduct consequence management following a CBRN-E incident.
10. Conduct monitor, survey, and decontamination operations.
11. Conduct operations in a contaminated environment.
REFERENCES:
1. JP 3-11 Joint Doctrine for Nuclear, Biological, and Chemical Defense
2. MCRP 3-37.2C Multi-service TTP for NBC Aspects of Consequence Management
3. MCWP 3-37.2 MTTPs for NBC Protection
4. MCWP 3-37.3 NBC Decontamination (FM 3-5)
3-32
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1, 2, 3
EVENT COMPONENTS:
1. Conduct intelligence preparation of the operating environment (IPOE).
2. Identify local resources, public facilities and capacity to support
operations.
3. Integrate CMO into all aspects of planning.
4. Establish command and control.
5. Task organize to support CMO.
6. Establish interface with local host nation authorities, other US
Governmental Agencies, non-governmental organizations, and civilian
population.
7. Establish Civil Military Operation Centers (CMOC).
8. Support civil administration.
9. Provide humanitarian assistance.
10. Conduct population and resource control.
REFERENCES:
1. FM 3-05.40 Civil Affairs Operations
2. JP 3-08 Interagency, Intergovernmental Organization, and Nongovernmental
Organization Coordination during Joint Operations, Vol I and II
3. JP 3-57 Joint Doctrine for Civil Military Operations
4. MCRP 3-33.1A Civil Affairs Operations
5. MCWP 3-33.1 MAGTF Civil military Operations
6. USAJFKSWCS Civil Military Operations Center (CMOC) Handbook dtd Feb 2002
SUPPORTED MET(S): 1, 2, 3
EVENT COMPONENTS:
1. Conduct intelligence preparation of the operating environment (IPOE).
2. Identify local civil security resources, public facilities and capacity to
3-33
NAVMC 3500.44
16 Sep 08
support operations.
3. Identify SME requirements.
4. Conduct integrated planning with higher and adjacent forces.
5. Integrate local host nation authorities, other US Governmental Agencies,
non-governmental organizations, and International Organizations into
planning.
6. Establish command and control.
7. Task organize to support civil security operations.
8. Conduct information operations.
9. Conduct civil military operations.
10. Restore essential civil services required for the maintenance of public
order and safety.
11. Facilitate capacity building of host nation security forces.
12. Enforce cessation of hostilities, peace agreements, and other
arrangements.
13. Conduct disarmament, demobilization, and reintegration.
14. Conduct border control, boundary security, and ensure freedom of movement.
15. Implement population and resource control measures.
16. Protect key personnel and facilities.
17. Clear residual explosive and CBRN hazards.
REFERENCES:
1. FM 3-05.40 Civil Affairs Operations
2. FM 3-07 Stability Operations and Support Operations
3. JP 3-08 Interagency, Intergovernmental Organization, and Nongovernmental
Organization Coordination during Joint Operations, Vol I and II
4. MCRP 3-33.1A Civil Affairs Operations
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Identify legal framework and government processes and institutions.
2. Support the security of rule of law processes and institutions.
3. Advise local authorities on rule of law processes.
4. Support the capacity building of host nation authorities to conduct rule
of law.
REFERENCES:
1. FM 3-05.40 Civil Affairs Operations
2. FM 3-07 Stability Operations and Support Operations
3. JP 3-08 Interagency, Intergovernmental Organization, and Nongovernmental
Organization Coordination during Joint Operations, Vol I and II
4. MCRP 3-33.1A Civil Affairs Operations
3-34
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Identify critical essential services infrastructure (sewage, water,
electricity, academics, trash, medical, safety, and other considerations
(SWEAT-MSO)).
2. Assess impact of essential services on operations and public order.
3. Support the security of essential services processes and facilities.
4. Establish mechanisms to assist in the prioritization for the
creation/restoration of essential services
5. Facilitate the establishment or restoration of essential services.
6. Advise local authorities on essential services.
7. Support the capacity building of host nation authorities to conduct
essential services.
8. Transition essential services to civil control.
REFERENCES:
1. FM 3-05.40 Civil Affairs Operations
2. FM 3-07 Stability Operations and Support Operations
3. JP 3-08 Interagency, Intergovernmental Organization, and Nongovernmental
Organization Coordination during Joint Operations, Vol I and II
4. MCRP 3-33.1A Civil Affairs Operations
5. USAID Field Operations Guide, dtd 2005
SUPPORTED MET(S): 1, 2, 3
EVENT COMPONENTS:
1. Conduct intelligence preparation of the operating environment (IPOE).
2. Identify local government / political / tribal / religious / ethnic
organizations and key leaders.
3. Assess local governance capacity and limitations.
4. Integrate with higher and adjacent governance plans.
3-35
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 3-05.40 Civil Affairs Operations
2. FM 3-07 Stability Operations and Support Operations
3. JP 3-08 Interagency, Intergovernmental Organization, and Nongovernmental
Organization Coordination during Joint Operations, Vol I and II
4. MCRP 3-33.1A Civil Affairs Operations
5. NSPD-44 Management of Interagency Efforts Concerning Reconstruction and
Stabilization
6. U.S. State Dept S/CRS Planning Guide for the Interagency Management
System, dtd Dec 2005
7. USAID Field Operations Guide, dtd 2005
8. USAJFKSWCS Civil Military Operations Center (CMOC) Handbook dtd Feb 2002
SUPPORTED MET(S): 1, 2, 3
EVENT COMPONENTS:
1. Conduct intelligence preparation of the operating environment (IPOE).
2. Assess local economy and employment rates IOT determine the impact of
economics on operations.
3. Assess the impact of operations on local economics.
4. Monitor and support economic initiatives implemented by local authorities,
other US governmental agencies, non-governmental organizations, and
international organizations.
REFERENCES:
1. FM 3-05.40 Civil Affairs Operations
2. FM 3-07 Stability Operations and Support Operations
3. JP 3-08 Interagency, Intergovernmental Organization, and Nongovernmental
Organization Coordination during Joint Operations, Vol I and II
4. MCRP 3-33.1A Civil Affairs Operations
3-36
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Support economic generation and enterprise creation, monetary
institutions and programs, public sector investment programs, private
sector development, natural resources and environment, agricultural
development programs, transportation infrastructure, restore
telecommunications infrastructure, general infrastructure reconstruction
programs
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Analyze the impact of the host nation's constitution and electoral laws on
plans and operations.
2. Focus intelligence efforts on identifying threats to the elections
process.
3. Conduct offensive operations as required to deter and defeat threats to
the elections process.
4. Establish liaison with key election security and logistics planning
organizations (both host nation and international) operating within the
assigned area of operations (AO).
5. Establish mechanisms for coordinating election security and logistics
support requirements.
6. Establish procedures for sharing sensitive threat information with key
election security organizations.
7. Support host nation security forces in securing key election facilities
and teams.
8. Synchronize security operations with voter registration efforts.
9. Assist registration teams in gaining access to remote or high threat
areas.
10. Support election education programs.
11. Monitor candidate security, campaign efforts and political party agendas.
12. Support host nation security forces in securing the distribution of
sensitive election materials and supplies.
13. During the conduct of voting, conduct combined area security operations in
key population centers and along lines of communication.
14. Support host nation security forces and election officials in establishing
force protection procedures and mechanisms at polling sites.
15. Establish quick reaction forces with coverage of key population centers.
16. Support host nation security forces in securing major ballot box
movements.
17. Support host nation security forces in securing counting centers.
3-37
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 3-07 Stability Operations and Support Operations
2. FMFRP 12-15 Small Wars Manual
3. MCRP 3-33.1A Civil Affairs Operations
SUPPORTED MET(S): 1, 2, 3
EVENT COMPONENTS:
1. Conduct intelligence preparation of the operating environment (IPOE).
2. Task organize.
3. Establish command and control.
4. Integrate joint, coalition, host nation and interagency capabilities and
organizations.
5. Exchange liaisons with joint, coalition, host nation and interagency
organizations.
6. Provide service and joint capabilities to coalition, host nation and
interagency organizations.
7. Establish Civil Military Operations Center.
8. Conduct intelligence, surveillance and reconnaissance (ISR) to develop
intelligence on insurgent activity and the local population.
9. Establish control over the area of operations.
10. Control, direct, coordinate, approve, modify or deny employment of organic
and supporting arms.
11. Establish detention facilities and conduct detainee operations.
12. Secure key terrain, infrastructure and individuals.
13. Kill or capture high value targets.
14. Commence detailed clearing of the objective area.
15. Complete actions on the objective.
16. Secure lines of communication leading into or out of the cleared area.
17. Implement population and resource control (PRC) measures.
18. Conduct targeting of remaining active insurgents.
19. Target insurgent support structures.
20. Target key individuals and organizations for engagement.
21. Disrupt insurgents outside of cleared area.
22. Conduct the full spectrum of information operations (PSYOP, MILDEC, OPSEC,
EW, CNA).
3-38
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-FID-8802 INF-COIN-7705 INF-COIN-7701
INF-COIN-7702 INF-MAN-8111 INF-STAB-8604
INF-STAB-8605 INF-STAB-8606 INF-STAB-8607
INF-COIN-8702 INF-COIN-8704 INF-COIN-8705
INF-FID-8801 INF-COIN-7704 INF-FID-8803
REFERENCES:
1. FM 6-20-50 Fire Support for Brigade Operations (Light)
2. FMFRP 12-15 Small Wars Manual
3. MCWP 3-33.5 Counterinsurgency Operations
SUPPORTED MET(S): 1, 2, 3
STANDARD: To separate the insurgents from the populace and deny them safe
haven.
EVENT COMPONENTS:
1. Conduct intelligence preparation of the operating environment (IPOE).
2. Establish command and control.
3. Task organize for combined operations with HN security organizations.
4. Integrate joint, coalition, host nation and interagency capabilities and
organizations.
5. Exchange liaisons with joint, coalition, host nation and interagency
organizations.
6. Provide service and joint capabilities to coalition, interagency and host
nation organizations.
7. Maintain a Civil Military Operations Center.
8. Maintain a persistent intelligence, surveillance and reconnaissance (ISR)
capability to develop intelligence on insurgent activity.
9. Control, direct, coordinate, approve, modify or deny employment of organic
and supporting arms.
10. Conduct combined action where feasible.
11. Assign combined forces geographic responsibility where feasible.
12. Transition U.S. positions, checkpoints and responsibilities to combined
forces where feasible.
13. Conduct combined/HN civil military operations.
14. Transition detention facilities and the conduct of detainee operations.
15. Kill or capture high value targets.
16. Transition responsibility for securing lines of communication leading into
or out of the cleared area.
17. Modify population and resource control measures as appropriate.
18. Conduct targeting of remaining active insurgents.
19. Target insurgent support structures.
20. Target key individuals and organizations for engagement.
21. Disrupt insurgents outside of the cleared area.
3-39
NAVMC 3500.44
16 Sep 08
22. Conduct the full spectrum of information operations (PSYOP, MILDEC, OPSEC,
EW, CNA).
23. Minimize U.S. presence and promote local HN security organizations.
24. Assign HN security forces geographic responsibility where feasible.
25. Transition combined positions, checkpoints and responsibilities to HN
forces where feasible.
26. Provide selective access to coalition enablers.
27. Transition population and resource control measures to HN authority.
28. Transition all security responsibilities to HN forces and authority when
HN security and governance capacity is proven capable of managing internal
threats to stability.
RELATED EVENTS:
INF-COIN-8704 INF-COIN-8705 INF-FID-8801
INF-FID-8802 INF-FID-8803 INF-COIN-8701
INF-COIN-7702 INF-COIN-7705 INF-STAB-8604
INF-STAB-8606 INF-STAB-8607 INF-COIN-7701
REFERENCES:
1. FM 3-07 Stability Operations and Support Operations
2. FMFRP 12-15 Small Wars Manual
3. MCWP 3-33.5 Counterinsurgency Operations
SUPPORTED MET(S): 1, 2, 3
EVENT COMPONENTS:
1. Establish a secure environment.
2. Assess local governance capacity, limitations and employment
considerations.
3. Coordinate security and life support requirements in support of local
civil authorities operating in the battlespace.
4. Identify the needs of the local civil authorities in terms of security,
economics, education and public information, food and agriculture,
governance, health and welfare, infrastructure, and rule of law.
5. Identify the root causes of instability.
6. Identify high impact/quick return projects which contribute towards
resolving the root causes of instability and develop local capacity.
7. Develop a campaign plan to resolve or mitigate the root causes of
instability and support the development of local capacity.
8. Assist local authorities in controlling military and police activities.
9. Assist in establishing and enforcing the rule of law.
10. Advise local host nation authorities on public administration.
11. Assist in the development of a Justice system (a judiciary system,
prosecutor/defense representation, and corrections).
3-40
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-COIN-7703
REFERENCES:
1. FM 3-05.40 Civil Affairs Operations
2. FM 3-07 Stability Operations and Support Operations
3. JP 3-08 Interagency, Intergovernmental Organization, and Nongovernmental
Organization Coordination during Joint Operations, Vol I and II
4. MCRP 3-33.1A Civil Affairs Operations
5. MCWP 3-33.5 Counterinsurgency Operations
6. NSPD-44 Management of Interagency Efforts Concerning Reconstruction and
Stabilization
7. SPHERE Project Humanitarian Charter and Minimum Standards in Disaster
Response Handbook, dtd 2004
8. U.S. State Dept S/CRS Planning Guide for the Interagency Management
System, dtd Dec 2005
9. USAID Field Operations Guide, dtd 2005
10. USAJFKSWCS Civil Military Operations Center (CMOC) Handbook dtd Feb 2002
EVENT COMPONENTS:
1. Secure lines of communication leading into and out of the cleared area.
2. Conduct a census.
3. Implement an Identification Card System (e.g. Biometrics).
4. Establish curfews.
5. Enforce a pass system.
6. Establish mechanisms and enforce limits on the length of time people can
travel.
7. Establish mechanisms and enforce limits on the number of visitors from
outside the cleared area combined with a requirement to register them with
local security forces or civil authorities.
3-41
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-STAB-8602 INF-STAB-8603 INF-STAB-8604
INF-COIN-7704 INF-COIN-8702 INF-COIN-7702
INF-STAB-8605
REFERENCES:
1. FM 3-07 Stability Operations and Support Operations
2. FMFRP 12-15 Small Wars Manual
3. JP 3-57 Joint Doctrine for Civil Military Operations
SUPPORTED MET(S): 1, 2, 6
EVENT COMPONENTS:
1. Explain to the population the purpose of operations.
2. Shape expectations.
3. Highlight successes.
4. Communicate requirements and purpose of population control measures.
5. Favorably influence perceptions of HN legitimacy and capabilities.
6. Obtain local support for combined and counterinsurgency operations.
7. Publicize insurgent violence.
8. Discredit insurgent propaganda and provide a more compelling alternative
to the insurgent ideology and narrative.
9. Persuade insurgents to turn themselves in or quit the insurgent
organization.
RELATED EVENTS:
INF-COIN-7705
REFERENCES:
1. FM 3-07 Stability Operations and Support Operations
2. FMFRP 12-15 Small Wars Manual
SUPPORTED MET(S): 1, 2, 6
3-42
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Conduct IPOE to identify threat networks operating in and around RCT/BN
AOs.
2. Establish command and control.
3. Determine how the threat networks function as systems.
4. Determine desired effects, objectives and end state with respect to threat
networks.
5. Develop a concept of operations to achieve desired end state.
6. Determine measures of effectiveness/performance (MOE/P).
7. Task organize for AtN operations.
8. Integrate host nation security and intelligence efforts into AtN
operations.
9. Employ systematic all-source intelligence collection/analysis capabilities
to identify and locate key threat cell structures.
10. Employ biometrics to facilitate targeting of threat cell members.
11. Implement population and resource control measures to isolate threat cells
and deny freedom of movement.
12. Leverage Attack the Network enablers (see Note 2).
13. In conjunction with higher headquarters, track threat network activities.
14. Employ fused intelligence and analysis to support targeting.
15. Conduct integrated targeting against threat networks with higher,
adjacent, subordinate and supporting organizations.
16. Target threat network popular support.
17. Target threat network command & control.
18. Target threat network cohesion.
19. Target threat network support structure.
20. Develop targeting packages and products.
21. Utilize Tactical Patience in the network targeting process.
22. Employ appropriate assets and fires to achieve desired effects against
network targets, to include SOF and/or SOF-like capabilities.
23. Conduct sensitive site exploitation (SSE) and tactical site exploitation
(TSE) to facilitate network targeting and identification of threat TTPs
and capabilities.
24. Assess AtN operations using MOE/P.
RELATED EVENTS:
INF-INT-7203 INF-INT-8203 INF-COIN-7706
INF-FSPT-8302
REFERENCES:
1. FM 2-0 Intelligence
2. MCDP 1-0 Marine Corps Operations
3. MCRP 2-3A Intelligence Preparation of the Battlefield
4. MCWP 2-1 Intelligence Operations
5. MCWP 3-1 Ground Combat Operations
6. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
7. MCWP 3-33.5 Counterinsurgency Operations
8. MCWP 5-1 Marine Corps Planning Process
3-43
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task is broad in nature and is designed to encompass the
requirements for various types of offensive attacks against a threat
network. Guiding principles include: Attack Cohesion, Attack Popular
Support, Attack Support Structure, Attack Command & Control, Create Net-
Centric capabilities, and Create Multi-Discipline Analytical Stare. Key
objectives are: Security for the Populace, Developing Targeting Packages
and Products, Understand Rapid Evolving Operational Picture, and to Fully
Leverage National Intelligence, C2, technology and Science to Defeat threat
networks.
2. Potential Attack the Network enablers include: (EOD, Combined
Explosive Exploitation Cells (CEXC), Weapons Intelligence Teams (WIT), C-
IED Targeting Program Cells (CITP), C-IED Operations Integration Center
(COIC), Operations Research Systems Analyst Team (ORSAT), Electronic
Warfare Officer/Electronic Counter Measures (EWO/ECM), FOX Team, Route
Clearance and Sensitive Site Exploitation Teams, MWD (Explosive
Detector/Specialized Search/Combat Tracker).
SUPPORTED MET(S): 3
EVENT COMPONENTS:
1. Conduct intelligence preparation of the operating environment (IPOE).
2. Assess Host Nation Security Force social structure, organization,
demographics, interrelationships, and education level.
3. Assess methods, successes, and failures of HN security efforts.
4. Assess the state of training at all levels, and the specialties and
education of leaders.
5. Assess HN equipment and their priority placed on maintenance.
6. Assess logistics and support structure, and its ability to meet the
force’s requirements.
7. Assess level of authorities of HN government officials and organizations
at all levels.
8. Assess HN command and control.
9. Assess extent of acceptance of ethnic and religious minorities.
10. Assess laws and regulations governing the security forces and their
relationship to national leaders.
11. Identify force generation objectives and end state.
12. Develop a force generation campaign plan.
13. Collaborate with national and local government agencies for recruiting
operations.
14. Develop plan to positively identify, screen, and induct recruits.
3-44
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-FID-8802 INF-FID-7803 INF-FID-7802
INF-FID-8803
REFERENCES:
1. FM 3-05.137 Army Special Operations Forces Foreign Internal Defense
2. FM 3-07 Stability Operations and Support Operations
3. MCIP 3-33.01 Small Unit Leader's Guide to Counterinsurgency
4. MCWP 3-33.5 Counterinsurgency Operations
SUPPORTED MET(S): 3
EVENT COMPONENTS:
1. Assess host nation security force capabilities.
2. Identify training requirements.
3. Establish a training cadre.
4. Establish training standards for HN security forces.
5. Determine methods of training host-nation security forces (formal schools,
mobile training teams, partnership training, advisory teams, embedded US
personnel in key positions, contractors).
6. Work with host nation government agencies to locate or build proper
training facilities, to include contracted life support agencies.
7. Identify equipment requirements and purchase / request any shortfall
items.
8. Develop course materials and assign instructors.
9. Establish force protection measures for HN forces in training.
3-45
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-COIN-7701 INF-COIN-7704 INF-COIN-7705
INF-FID-7802 INF-FID-8803 INF-COIN-8701
INF-COIN-8704 INF-COIN-8705 INF-FID-8801
INF-FID-7803
REFERENCES:
1. FM 3-05.137 Army Special Operations Forces Foreign Internal Defense
2. FM 3-07 Stability Operations and Support Operations
3. MCIP 3-33.01 Small Unit Leader's Guide to Counterinsurgency
4. MCWP 3-33.5 Counterinsurgency Operations
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Military Training. The following is a list of potential military
training requirements:
a. Train in basic day / night patrolling.
b. Train in weapons employment.
c. Train in communications.
d. Train in basic intelligence functions.
e. Train in coordination of indirect fires.
f. Train in providing effective medical support.
g. Train in law of armed conflict.
h. Train in the art of leadership.
i. Train in intelligence collection.
j. Train in cordon and search operations.
k. Train in combined operations.
l. Train in treatment of detainees and prisoners.
m. Train in psychological operations.
n. Train in civic action.
o. Train in effective personnel management.
p. Train in logistic (planning, maintenance, sustainment, and movement)
operations.
q. Train in staff functioning.
r. Train in unit training management.
s. Train in ethics.
t. Train in rule of law.
3-46
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 3
EVENT COMPONENTS:
1. Determine method for advising foreign military forces (embedded training
team or unit partnership).
2. Identify personnel and equipment requirements for advisor staff.
3. Screen advisors.
4. Provide relevant training to advisors.
5. Ensure adequate force protection for advisors.
6. Develop support/manning/supply plans in support of advisory team
7. Develop plan for information sharing.
8. Develop campaign plan for military partnering, coordination measures, and
transfer of authority as required.
9. Select and conduct missions and tasks to build successes/confidence.
10. Conduct after action reviews.
11. Identify potential leaders.
RELATED EVENTS:
INF-COIN-8701 INF-COIN-8704 INF-COIN-8705
INF-FID-8801 INF-FID-7803 INF-COIN-7701
INF-COIN-7704 INF-COIN-7705 INF-FID-7802
INF-FID-8802
REFERENCES:
1. FM 3-05.137 Army Special Operations Forces Foreign Internal Defense
2. FM 3-07 Stability Operations and Support Operations
3. MCIP 3-33.01 Small Unit Leader's Guide to Counterinsurgency
4. MCWP 3-33.5 Counterinsurgency Operations
5. TC 31-73 Special Forces Advisor Guide
3-47
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 4
EVENT COMPONENTS:
1. Conduct intelligence preparation of the operating environment (IPOE).
2. Conduct the Marine Corps Planning Process.
3. Conduct targeting.
4. Conduct concurrent planning with MAGTF staff to select recommended Landing
Area, Landing Force (LF) objectives, and beachhead for CLF/Commander
Amphibious Task Force (CATF) approval.
5. Conduct intelligence, surveillance and reconnaissance (ISR), to include
hydrographic surveys.
6. Integrate the landing plan with the scheme of maneuver and supporting
plans.
7. Coordinate naval and joint fire support.
8. Develop, publish, and disseminate the operation plan, embarkation plan,
landing plan.
9. Determine and direct Advance Force Operations requirements, to include
counter anti-access measures, reconnaissance, ISR and shaping.
10. Provide input for the development of the Approach Schedule.
11. Develop a debarkation schedule.
12. Coordinate embarkation requirements for the detailed landing plan,
including planning of air (Helicopter Availability Tables (HAT),
Helicopter Employment and Assault Landing Table (HEALT), Helicopter Wave
and Serial Assignment Table (HWSAT), and the Helicopter Landing Diagram
(HLD)) and surface (serial assignment, landing diagrams, Landing Craft and
Amphibian Vehicle Assignment Table (LCAVAT)) documents.
13. Balance unit integrity and combat spread loading when developing the
LCAVAT, HWSAT and SAT.
14. Conduct rehearsals, inspections, and subordinate unit brief-backs.
RELATED EVENTS:
INF-EXPO-7901
REFERENCES:
1. JOINT PUB 3-02.1 Landing Force Operations
2. JP 3-02 Joint Doctrine for Amphibious Operations
3. MCDP 3 Expeditionary Operations
4. MCWP 3-31.5 Ship-to-Shore Movement
5. MCWP 3-31.6 Supporting Arms Coordination in Amphibious Operations
6. MCWP 4-1 Logistics Operations
7. MCWP 4-11 Tactical Level Logistics
SUPPORT REQUIREMENTS:
3-48
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17330 Covered Training Area
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task is broad in nature and is designed to encompass the
requirements for various types of amphibious operations to include:
amphibious assault, amphibious withdrawal, amphibious demonstration, and
amphibious raid.
SUPPORTED MET(S): 4
EVENT COMPONENTS:
1. Establish command and control.
2. Conduct rehearsals.
3. Conduct Advance Force operations (shaping).
4. Conduct intelligence, surveillance and reconnaissance (ISR).
5. Update and modify plan, to include fire support as required.
6. Receive and disseminate the intelligence updates to subordinate units.
7. Conduct ship to shore movement.
8. Coordinate beachhead operations with LFSP through TACLOG.
9. Accomplish initial objectives.
10. Establish and maintain communications ashore.
11. Transition command ashore while maintaining continuity of operations.
12. Transition control of fires ashore.
RELATED EVENTS:
INF-EXPO-7903
REFERENCES:
1. JOINT PUB 3-02.1 Landing Force Operations
2. JP 0-2 Unified Action Armed Forces (UNAAF)
3. MCDP 1-0 Marine Corps Operations
4. MCDP 3 Expeditionary Operations
3-49
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17330 Covered Training Area
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
Facility Code 17936 Close Air Support Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task is broad in nature and is designed to encompass the
requirements for various types of amphibious operations to include:
amphibious assault, amphibious withdrawal, amphibious demonstration, and
amphibious raid.
SUPPORTED MET(S): 3, 4
EVENT COMPONENTS:
1. Participate in MPF planning process.
2. Support OPP/SLRP requirements.
3. Conduct predeployment processing.
4. Identify remain behind equipment (RBE) requirements.
5. Coordinate RBE requirements.
6. Coordinate FIE embarkation and strategic movement.
7. Coordinate for any follow-on force movement.
8. Coordinate with MAGTF MPF command and control agencies.
9. Coordinate property accounting of assets.
10. Coordinate maintenance support requirements.
11. Coordinate deployment of the FIE.
12. Task organize personnel to support throughput to TAAs.
13. Task organize equipment for the regimental combat team.
14. Conduct operational checks of all equipment.
15. Support unit marshalling and movement operations.
16. Support arrival and assembly operations.
17. Conduct operations ashore.
18. Support regeneration operations.
3-50
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. DOD 4500.9-R Defense Transportation Regulation Parts I, II & III
2. MCBul 3501 MPF Marine Expeditionary Brigade (MEB) Force List
3. MCWP 3-31.5 Ship-to-Shore Movement
4. MCWP 3-32 Maritime Pre-positioning Force (MPF) Operations
5. MCWP 4-1 Logistics Operations
6. MCWP 4-11 Tactical Level Logistics
7. MCWP 5-1 Marine Corps Planning Process
8. NAVMC 2907 MPF Prepositioning Objective
9. NWP 22-10 MPF Operations
10. OH 1-5-1 Tri-MEF Maritime Pre-positioning Force Standing Operating
Procedure
SUPPORTED MET(S): 3
EVENT COMPONENTS:
1. Conduct intelligence preparation of the operating environment (IPOE).
2. Conduct planning, coordination, and preparation for combat.
3. Establish command and control.
4. Task organize.
5. Draw and issue specialized equipment/prepare ECC suite.
6. Conduct movement to the objective/evacuation site.
7. Conduct security and/or ECC operations.
8. Conduct liaison/coordination with embassy and local security, and/or
Country Team personnel, as required.
9. Plan responses to public order disturbance, enemy action, or reports of
evacuees at other locations.
10. Conduct retrograde.
11. Conduct debrief.
RELATED EVENTS:
INF-EXPO-6904
REFERENCES:
1. JP 3-07.5 Joint Tactics, Techniques, and Procedures for Noncombatant
Evacuation
SUPPORT REQUIREMENTS:
3-51
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17760 MOUT Assault Course (MAC)
Facility Code 17962 MOUT Collective Training Facility (Small)
UNITS/PERSONNEL:
1. MOUT facility/MOUT Training area
2. Role players (Evacuees)
3. Opposing Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This may include public order operations such as augmenting local
security forces, protecting key installations, riot control, removing
unlawful obstructions, or dispersing an unlawful assembly.
SUPPORTED MET(S): 1, 2, 6
EVENT COMPONENTS:
1. Determine command relationships.
2. Establish integrated command and control procedures.
3. Identify capabilities and limitations of Joint/Combined/Host Nation forces
and other US government agencies / international organizations and non-
governmental organizations.
4. Identify restrictions (constraints/restraints) relating to other forces
and organizations (i.e. national caveats).
5. Implement liaison exchange procedures.
6. Implement intelligence/information sharing procedures.
7. Identify external logistics support requirements.
8. Establish and implement procedures for integrated planning.
9. Establish and implement procedures for operations.
10. Establish and implement procedures for coordinating and synchronizing
fires and effects.
11. Establish communications connectivity.
REFERENCES:
1. FM 3-05.137 Army Special Operations Forces Foreign Internal Defense
2. JP 3-08 Interagency, Intergovernmental Organization, and Nongovernmental
Organization Coordination during Joint Operations, Vol I and II
3. JP 3-16 Multinational Operations
4. JP 3-57 Joint Doctrine for Civil Military Operations
5. MCWP 3-33.1 MAGTF Civil military Operations
3-52
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1, 2, 3, 4, 6
STANDARD: To ensure that the unit and all individuals are properly prepared
to execute combat operations.
EVENT COMPONENTS:
1. Develop METL (URP-ANLZ-2001).
2. Identify collective training standards (URP-DESI-2005).
3. Conduct training assessment (URP-DESI-2006).
4. Determine training strategy (URP-DESI-2007).
5. Develop training guidance (URP-DESI-2008).
6. Develop a long range training plan (URP-DESI-2009).
7. Develop a mid range training plan (URP-DESI-2010).
8. Develop a short range training plan (URP-DESI-2011).
9. Develop weekly training schedules (URP-DESI-2012).
10. Coordinate unit training (URP-DEVI-2016).
11. Develop Lesson Materials (URP-DEVI-2017).
12. Develop Training Materials (URP-DEVI-2018).
13. Conduct Operational Risk Assessment (URP-DEVI-2019).
14. Conduct Training (URP-IMPI-2024).
15. Conduct formal/informal training evaluations (URP-EVLI-2028).
16. Conduct after-action reviews (URP-EVLI-2029).
REFERENCES:
1. MCO 1553.3A Unit Training Management (UTM) (Jan 04)
2. MCRP 3-0A Unit Training Management Guide (Nov 96)
3. MCRP 3-0B How to Conduct Training (Nov 96)
4. NAVMC 3500.37 Train The Trainer, Training and Readiness Manual
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Event Components listed in this event are from the Train-the-Trainer
(T3) Training and Readiness Manual (NAVMC 3500.37). See the listed events
in the T3 T&R Manual for additional granularity on each component.
3-53
NAVMC 3500.44
16 Sep 08
CHAPTER 4
PARAGRAPH PAGE
4-1
NAVMC 3500.44
16 Sep 08
CHAPTER 4
4001. ADMINISTRATIVE NOTES. T&R events are coded for ease of reference.
Each event has a 4-4-4 digit identifier. The first four digits represent the
occupational field, "INF". The second four digits represent the functional
or duty area (e.g. Fire Support Planning (FSPT), Communications (COMM),
etc.). The last four digits represent the level, and identifier number of
the event. The battalion collective events are only in the 7000 level.
Every event has a unique identifier number from 001 to 999.
4-2
NAVMC 3500.44
16 Sep 08
Eval
Event Code Event Page
Code
MANEUVER
Employ an anti-armor section/platoon in support
INF-MAN-7101 4-5
of battalion operations (A)
INF-MAN-7102 Conduct obstacle breaching (B) 4-6
INF-MAN-7103 Conduct a passage of lines (B) 4-7
INF-MAN-7104 Conduct counter-IED (C-IED) operations (B) 4-8
INF-MAN-7105 Occupy an assembly area (B) 4-9
INF-MAN-7107 React to a meeting engagement (B) 4-10
INF-MAN-7110 Conduct a relief in place (RIP) (B) 4-11
INF-MAN-7111 YES Conduct an attack (B) 4-12
INF-MAN-7114 Conduct a motorized attack (B) 4-13
INF-MAN-7115 Conduct a tank infantry attack (B) 4-14
INF-MAN-7116 Conduct a mechanized attack (B) 4-15
Conduct a helicopter/tilt-rotor borne assault
INF-MAN-7117 4-17
(B)
INF-MAN-7120 Conduct a movement to contact (B) 4-18
INF-MAN-7132 YES Conduct a defense (B) 4-19
INF-MAN-7133 Conduct a withdrawal/delay (B) 4-21
INF-MAN-7134 Conduct a delaying action (B) 4-23
INF-MAN-7145 Conduct route reconnaissance (B) 4-24
COMMUNICATIONS
Employ a Command, Control, Communication, and
INF-COMM-7201 4-25
Computer Suite (C4) (B)
INTELLIGENCE
INF-INT-7203 YES Conduct intelligence (B) 4-26
FIRE SUPPORT
Operate the Fire Support Coordination Center or
INF-FSPT-7301 4-27
equivalent (B)
INF-FSPT-7302 YES Conduct fire support coordination (B) 4-28
OPERATIONS
INF-OPS-7401 Conduct staff planning (A) 4-31
COMBAT SERVICE SUPPORT
INF-CSS-7403 Conduct tactical logistics (B) 4-32
INF-CSS-7404 Conduct convoy operations (B) 4-33
MEDICAL
INF-MED-7430 Process Casualties (B) 4-33
CBRN
INF-CBRN-7501 Operate in a CBRN environment (B) 4-34
COUNTERINSURGENCY OPERATIONS
INF-COIN-7701 Clear an area of insurgents (B) 4-35
INF-COIN-7702 Hold an area cleared of insurgents (B) 4-36
INF-COIN-7703 Build local governance (B) 4-38
Implement population and resource control
INF-COIN-7704 4-39
measures (B)
Conduct counterinsurgency psychological
INF-COIN-7705 4-39
operations (B)
INF-COIN-7706 Conduct Attack the Network (AtN) operations (B) 4-40
4-3
NAVMC 3500.44
16 Sep 08
MOUT
INF-MOUT-7801 YES Operate in urban terrain (B) 4-41
FOREIGN INTERNAL DEFENSE
INF-FID-7802 Train foreign security forces (C) 4-42
INF-FID-7803 Advise foreign security forces (C) 4-44
EXPEDITIONARY OPERATIONS
INF-EXPO-7901 YES Conduct amphibious staff planning (B) 4-45
INF-EXPO-7902 YES Develop a landing plan (B) 4-46
INF-EXPO-7903 YES Conduct an amphibious assault (B) 4-48
INF-EXPO-7904 Conduct an amphibious withdrawal (B) 4-49
4-4
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Assist in the development of the scheme of maneuver.
2. Direct the emplacement of the section/platoon.
3. Coordinate with adjacent, supporting and supported units.
4. Engage targets according to the scheme of maneuver.
5. Displace according to the scheme of maneuver.
6. Prepare for follow on missions.
CHAINED EVENTS:
INF-0352-4101
RELATED EVENTS:
INF-0352-5100
REFERENCES:
1. MCWP 3-15.5 Anti-armor Operations
2. TM 09397B-12/1 Operator and Organizational Maintenance Manual for Javelin
3. TM 9-1425-450-12 TOW Weapon System Guided Missile System
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
PL64 Guided Missile and Launcher, AT FGM- 2
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
4-5
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1
STANDARD: To reduce the obstacle, move through the breach site, and continue
the attack with minimal delay.
EVENT COMPONENTS:
1. Designated maneuver elements(s) task organize in the anticipation of
requirement to breach obstacles.
2. When obstacle is encountered it is reported to battalion and report is
forwarded to higher.
3. Determination is made whether the lead maneuver element has the means to
breach without support or requires additional support/reinforcement.
4. Conduct leader's reconnaissance and designate breach point(s).
5. Employ obscuration smoke and fires in support of and to conceal breach
effort and movement.
6. Breach element(s) moves to the breach point(s) using available cover and
concealment and conducts preparations for breach.
7. Barriers, wire, or other obstacles are breached.
8. Mark unexploded mines.
9. Element(s) clears the breach lane(s), conducts a limited assault/security
beyond the breach.
10. Mark the route to the breach, the breach lane(s), and the route beyond the
obstacle. If breach will be used at night (or limited visibility) mark
accordingly.
11. Remove, destroy, or clearly mark all remaining mines.
12. After completion of initial assault, lane(s) are improved, or additional
lanes are cleared and marked as required to support follow-on movement of
battalion and follow-on forces.
13. Make a determination whether or not to have the breaching element remain
as security for breach site or continue the attack. Other designated
element/reserves move through and exploit the breach is applicable.
14. Follow-on support units move through the breach.
15. Send and receive reports as required.
CHAINED EVENTS:
INF-MAN-6102
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. FMFM 6-4 Marine Rifle Company/Platoon
3. MCWP 3-11.2 Marine Rifle Squad
4. MCWP 3-17 Engineer Operations
5. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
6. TM 9-1375-213-12 Demolition Materials
4-6
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
Facility Code 17420 Maneuver/Training Area, Heavy Forces
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Conduct coordination and planning between higher headquarters, both
stationary and moving unit, as well as al other supporting units and fire
support agencies.
2. Employ all means to ensure common view of battle space and operation and
passage of information, to include but not limited to: co-location of
command groups and exchange of liaison personnel at all levels.
3. Co-locate both commanders to observe critical areas, to make timely
decisions during the passage, and to facilitate passage of responsibility
for the passage of control.
4. Exchange all required intelligence and tactical information.
5. Establish graphic control measures (start points, contact points, passage
lanes, passage points, release points) and coordinate with all units
involved in the passage.
6. Coordinate/identify when and where battle handover/passage of command will
occur.
7. Arrange for leader's reconnaissance of passage area and forward battle.
8. Stationary unit selects and marks passage lanes/points/areas and positions
personnel to guide moving unit.
9. Establish priorities for use of routes and resources.
10. The stationary unit controls/delivers supporting fires prior to and until
battle handover/passage of command.
11. Conduct continual coordination during movement and passage to include
marking/identification of moving unit's lead and rear trace.
12. At identified release points, moving unit commanders re-assume control of
their units.
13. Moving unit assumes responsibility for control of fires and battle space
from stationary unit at the planned/coordinated time/place.
14. Coordination conducted with higher headquarters and between passing units
to limit enemy observation and awareness of passage of lines.
15. Coordinate plan for casualty evacuation and detainee handling.
16. Send and receive required reports.
CHAINED EVENTS:
INF-MAN-6103
4-7
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 17-95 Cavalry
2. FMFM 6-3 Marine Infantry Battalion
3. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
SUPPORTED MET(S): 1, 2, 6
EVENT COMPONENTS:
1. Establish a C-IED working group.
2. Establish Electronic Warfare Coordination Cell (EWCC).
3. Identify threat IED capabilities and TTPs.
4. Conduct pattern analysis on the IED threat.
5. Analyze threat IED TTPs.
6. Conduct ISR in high threat areas to detect emplacers.
7. Conduct IO and CMO to garner popular support to assist in IED reporting.
8. Integrate enablers into C-IED efforts (See Note 2).
9. Integrate host nation security forces into C-IED efforts.
10. Coordinate electronic protection requirements.
11. Conduct route clearance operations.
12. Develop and maintain route status reports.
13. Conduct route security patrols and establish overwatch positions to detect
and deter IED threats.
14. Develop countermeasures (TTPs) to mitigate the IED threat.
15. Conduct post-blast analysis / exploitation.
16. Synchronize C-IED reporting and dissemination.
RELATED EVENTS:
INF-MAN-8104 INF-COIN-7706 INF-COIN-8706
REFERENCES:
1. FM 2-0 Intelligence
2. MCDP 1-0 Marine Corps Operations
3. MCRP 2-3A Intelligence Preparation of the Battlefield
4. MCWP 3-1 Ground Combat Operations
5. MCWP 3-33.5 Counterinsurgency Operations
6. MCWP 5-1 Marine Corps Planning Process
MISCELLANEOUS:
4-8
NAVMC 3500.44
16 Sep 08
ADMINISTRATIVE INSTRUCTIONS:
1. Principles of C-IED (System Defeat) are the following: Predict,
Prevent, Detect, Neutralize, Mitigate, Effects.
2. C-IED enablers include: (EOD, Combined Explosive Exploitation Cells
(CEXC), Weapons Intelligence Teams (WIT), C-IED Targeting Program Cells
(CITP), C-IED Operations Integration Center (COIC), Operations Research
Systems Analyst Team (ORSAT), Electronic Warfare Officer/Electronic Counter
Measures (EWO/ECM), FOX Team, Route Clearance and Sensitive Site
Exploitation Teams, MWD (Explosive Detector/Specialized Search/Combat
Tracker).
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Initial security/occupation plan is established and briefed to subordinate
companies/units.
2. Conduct reconnaissance.
3. Quartering party identifies, marks, and secures tentative positions within
the assembly area.
4. Units conduct movement to identified areas, guided by quartering party or
other designated element(s).
5. Assign and occupy sectors that ensure mutual support and cover all gaps by
observation and fire.
6. Establish COC.
7. Set and conduct priorities of work.
8. Refine security plan.
9. Coordinate with higher and adjacent units.
10. Send and receive required reports.
CHAINED EVENTS:
INF-MAN-6105
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. FMFM 6-4 Marine Rifle Company/Platoon
3. MCDP 1-0 Marine Corps Operations
4. MCWP 3-11.2 Marine Rifle Squad
5. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
6. TM 9-1375-213-12 Demolition Materials
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
4-9
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. React in accordance with rehearsed battle drills, Standard Operating
Procedures (SOPs), and commander's guidance.
2. Elements observing or in contact with enemy forces assume a covered and
concealed position and report to adjacent and higher units.
3. Elements observing or in contact with enemy forces employ all available
direct and indirect fires to gain fire superiority.
4. Send and receive an initial SITREP.
5. Determine the enemy's location and disposition.
6. Conduct an assessment of the situation and issue a verbal fragmentary
order that specifies an objective and provides control measures.
7. Develop and execute a hasty fire support plan to support the scheme of
maneuver.
8. Elements in contact maintain situational awareness of friendly positions
to avoid fratricide in a chaotic and developing situation.
9. Avoid decisive engagement with a superior force, if applicable.
10. While maintaining pressure on the enemy, evacuate casualties and process
detainees.
11. Consolidate, reorganize, and submit reports.
CHAINED EVENTS:
INF-MAN-6107
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
4-10
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Conduct coordination and planning between higher headquarters, both
stationary and relieving units, as well as other supporting units and fire
support agencies.
2. Employ all means to ensure common view of battle space and operation and
passage of information, to include but not limited to: co-location of
command groups, and exchange of liaison personnel at all levels.
3. Exchange all required intelligence and tactical information.
4. Coordinate/identify when and where battle handover/passage of command will
occur.
5. Provide an operations overlay and a copy of the fragmentary order to the
relieving unit.
6. Conduct detailed coordination and liaison between representatives of fire
support units in support of both units at the command post (CP)/combat
operations center (COC) of the stationary unit.
7. Provide fire plan sketches or overlays to the relieving units.
8. Maintain security and communications at normal levels.
9. Conduct the movement of units over planned routes, based on the planned
sequence of movement and relief.
10. Maintain noise and light discipline and the dispersion of forces
throughout movement.
11. Use guides to lead relieving units into positions and to lead relieved
units out of position.
12. Relieve local security units last.
13. Keep fire support assets in position throughout the relief of maneuver
units. Ensure they are prepared to support both units.
14. Keep liaison personnel in position until the relieving unit has assumed
control.
15. Ensure that at every level down to and including the individual Marine,
face-to-face briefs are conducted.
16. Conduct familiarization and combined operations to ensure relieving unit
readiness to assume mission, if applicable.
17. Relieve crew-served weapons personnel after rifle units.
18. Use assembly areas that provide cover and concealment and are large enough
to allow for the dispersion of units.
19. Maintain all around security throughout the entire relief of units.
20. Account for all personnel, supplies, and equipment.
21. Execute tactical deception during the relief.
22. Relinquish responsibility for the area upon agreement by the two
commanders and after approval from the higher commander.
23. Send and receive required reports.
24. Coordinate the transfer or exchange of supplies and equipment to include:
communications, wire lines, radio antennas, and petroleum, oils, and
lubricants (POL).
4-11
NAVMC 3500.44
16 Sep 08
CHAINED EVENTS:
INF-MAN-6110
REFERENCES:
1. FM 17-95 Cavalry
2. FMFM 6-3 Marine Infantry Battalion
3. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct planning and IPB to identify points in time/space for
decisions/passage of control of fires.
2. Conduct inspections, rehearsals, and preparations.
3. Task organize.
4. Employ reconnaissance and surveillance elements to detect enemy forces,
positions, movement, and obstacles, and submit reports in a timely manner.
5. Occupy assembly area.
6. Initiate preparatory fires, if applicable.
7. Cross the line of departure (LD) at the specified time.
8. Maneuver elements employ appropriate formations and tactics to approach
the objective.
9. Screen flanks as required.
10. In accordance with established battalion bypass criteria, maneuver
elements bypass or rapidly breach obstacles and/or enemy encountered
enroute to the objective.
11. Maneuver elements occupy attack position and conduct final preparations
and leader's reconnaissance.
12. Use, coordinate, and deconflict indirect/direct fires and counter-fires to
support the maneuver unit(s) maneuver to objective and establishment of
fire superiority.
13. Assess and adjust priorities of fire and main effort in accordance with
the plan and evolving situation.
14. Position COC and key battalion leaders/staff to best command and control.
15. Employ supporting arms to engage targets of opportunity forward of
assigned maneuver unit zones.
16. In conjunction with higher headquarters, track progress of enemy
reinforcements, activities of enemy higher echelons/reserves.
17. Establish redundant communications plan and position retransmission sites
as required.
18. Ensure standardization of signals throughout the battalion.
4-12
NAVMC 3500.44
16 Sep 08
CHAINED EVENTS:
INF-MAN-6111
RELATED EVENTS:
INF-MAN-6112 INF-MAN-6113 INF-MAN-8111
INF-MAN-6115 INF-MAN-6116 INF-MAN-6114
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. MCDP 1-0 Marine Corps Operations
3. MCRP 3-16.2 Techniques and Procedures for Fire Support Coordination
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task is broad in nature and is designed to encompass the
requirements for various types of attacks to include: raids, night,
motorized, tank-infantry, mechanized, etc.
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Commander determines rates of march, dispersion, dismount and
remount/link-up points, and load/bump plan
4-13
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-MAN-8116 INF-MAN-7111 INF-MAN-6114
REFERENCES:
1. FM 17-95 Cavalry
2. FMFM 6-3 Marine Infantry Battalion
3. MCDP 1-0 Marine Corps Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17906 Wheeled Vehicle Drivers Course
Facility Code 17936 Close Air Support Range
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
SUPPORTED MET(S): 1
4-14
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Deploy reconnaissance and surveillance teams in forward operating areas
2. Cross the Line of Departure (LD) at the specified time
3. Ensure security for tanks is provided throughout the attack
4. Maintain positive control over lead, flank, and rear security elements
5. Continually adjust movement techniques, depending upon the situation and
the terrain
6. Use appropriate techniques of movement when crossing danger areas
7. Use control measures that provide positive control of movement and fires
8. Breach obstacles as required
9. Coordinate the movement of tanks and infantry to maximize the use of the
tanks' armor protected firepower, mobility, speed, and shock action
10. Ensure tank/infantry communications are effective and redundant throughout
the movement and attack
11. Consolidate and reorganize on the objective
12. In consolidation, position tanks where they are protected but can still
maximize their capabilities
13. Consolidate and reorganize on the objective
RELATED EVENTS:
INF-MAN-6115 INF-MAN-8116 INF-MAN-7111
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. MCDP 1-0 Marine Corps Operations
3. MCWP 3-12 Marine Corps Tank Employment
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17907 Tracked Vehicle Drivers Course
Facility Code 17936 Close Air Support Range
Facility Code 17430 Impact Area Dudded
SUPPORTED MET(S): 1
4-15
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Determine tentative dismount and link-up/remount points, and load/bump
plan
2. Cross the Line of Departure (LD) at the determined time
3. Provide security for the vehicles throughout the attack
4. Maintain positive control over lead, flank, and rear security elements
5. Continually adjust movement techniques, depending upon the situation and
terrain. If the unit receives effective fire, the unit may dismount and
continue the attack
6. Use appropriate techniques of movement when crossing danger areas
7. Use control measures for control of movement and fires
8. Breach or bypass obstacles
9. Ensure all vehicle commanders and embarked unit leaders are able to give
their locations when asked
10. Consolidate and reorganize on the objective
11. During consolidation, withdraw AAVs, tanks, and other combat vehicles from
the point of furthest advance and position in hull defilade, or where they
can best employ their weapons
12. Take appropriate actions to handle disabled tanks, AAVs, and other combat
vehicles
RELATED EVENTS:
INF-MAN-6116 INF-MAN-7111 INF-MAN-6115
INF-MAN-8116 INF-MAN-7115
REFERENCES:
1. FM 17-95 Cavalry
2. FMFM 6-3 Marine Infantry Battalion
3. MCDP 1-0 Marine Corps Operations
4. MCDP 1-3 Tactics
5. MCWP 3-1 Ground Combat Operations
6. MCWP 3-12 Marine Corps Tank Employment
7. MCWP 3-13 Employment of Amphibious Assault Vehicles (AAVs)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17907 Tracked Vehicle Drivers Course
Facility Code 17936 Close Air Support Range
4-16
NAVMC 3500.44
16 Sep 08
UNITS/PERSONNEL:
1. AAV unit
2. Tank unit
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct ground or aerial reconnaissance to gain critical information
(routes of ingress/egress, landing sites, obstacles, enemy positions and
anti-aircraft defense, etc.).
2. Ensure TRAP force is properly prepared and briefed.
3. Conduct planning, inspections, and preparations (must include
primary/alternate routes and landing zones (LZs), loading plan/pick-up LZ
plan, and landing plan/insert LZ plan).
4. Conduct fire support planning/deconfliction and combined arms rehearsal to
support aviation movement routes, preparatory fires (if applicable),
suppress enemy air defense (SEAD), and insert.
5. Task organize.
6. Ensure assault force Marines, aircraft crew chiefs, and ground and
aviation leaders at all levels exhibit a clear understanding of
embarkation/debarkation of aircraft, actions in insert LZs/geometry of
fires, and emergency/safety procedures.
7. Develop an accurate system for manifesting all Marines to ensure
accountability throughout the operation.
8. Maintain security during loading.
9. Establish means of maintaining ground unit leader's situational awareness
while on aircraft.
10. Establish a bump plan.
11. Establish Go/No-Go criteria (if applicable).
12. Control and coordinate fires in support of the movement, insert, and
attack. (Establish criteria for hand-off of control of fires from aviation
elements to the assault force element.)
13. Develop plan for airborne command and control (if applicable).
14. Develop link-up plan (if applicable).
15. Conduct terminal guidance (if applicable).
16. Divert airborne force to the alternate LZ if the situation dictates.
17. Upon landing, lead elements of the assault force quickly clear the
immediate vicinity of the zone, move to previously assigned areas, and
establish positions that provide protection for subsequent waves.
18. Quickly build up combat power in the zone.
19. Maintain security during landing and adjust unit and weapons positions as
required.
4-17
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-EXPO-6905 INF-MAN-6117
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. FMFM 6-4 Marine Rifle Company/Platoon
3. MCWP 3-11.4 Helicopterborne Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct planning, coordination, and preparations for combat.
2. Conduct intelligence preparation.
3. Task organize (normally security force, advance guard, main body, flank
guard, and rear guard).
4. Place the command group where it can best control the formation.
5. Deploy lead elements in a formation based on the probability of enemy
contact and far enough forward to provide time and space for the commander
to react to enemy contact or obstacles.
6. All units use movement techniques appropriate for the terrain and
probability of enemy contact.
7. The overall formation used should permit elements in contact to provide
suppressive fire, while following units employ fire and maneuver to close
with and defeat the enemy.
4-18
NAVMC 3500.44
16 Sep 08
CHAINED EVENTS:
INF-MAN-6120
RELATED EVENTS:
INF-MAN-6101 INF-MED-6430 INF-OPS-6401
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
SUPPORTED MET(S): 2
4-19
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Conduct planning and IPB, in particular identifying points in time/space
for decisions/passage of control of fires (with higher headquarters and
internally).
2. Conduct inspections and preparations.
3. Task organize.
4. Conduct reconnaissance with key subordinates of assigned sectors.
5. Designate combat operations center (COC) position.
6. Identify and mark positions/boundaries.
7. Conduct preliminary movement and positioning of forward security
personnel, scout sniper elements, barrier materials, supplies, and
equipment.
8. Occupy the defense using marked occupation routes.
9. Initiate patrolling plan and improve security.
10. Conduct a CPX or a staff rehearsal, if feasible.
11. Conduct a rehearsal of planned counterattacks by fire and movement, if
feasible.
12. Conduct work in accordance with priorities and timeline.
13. Supervise/coordinate establishment and marking of sectors of fire for
subordinate, supporting, and attached units.
14. Coordinate and supervise at all levels to ensure effective employment of
weapon systems, safety, and the geometry of fires.
15. Task units within the battalion to assist engineers in emplacement of
obstacles and other designated tasks.
16. Conduct the fire support/targeting process and ensure integration of
direct and indirect fires.
17. Register indirect fires.
18. In conjunction with higher headquarters, track progress of enemy
reinforcements, activities of enemy higher echelons/reserves.
19. Establish redundant communications plan and position retransmission sites
as required.
20. Ensure standardization of signals throughout the battalion.
21. Produce, receive, and forward fire plan sketches and overlays.
22. Refine positions.
23. Establish and rehearse final protective fires, counterattack plan,
displacement plan, and defensive battle drills.
24. Establish alert postures.
25. Conduct continuing actions.
26. Establish CBRN detection measures.
27. Process casualties/detainees and conduct tactical logistics.
28. Send and receive required reports.
CHAINED EVENTS:
INF-MAN-6132
RELATED EVENTS:
INF-MAN-8132
REFERENCES:
1. FM 17-95 Cavalry
2. FM 17-97 Regimental Armored Cavalry Troop
3. FMFM 6-3 Marine Infantry Battalion
4. MCRP 3-16.2 Techniques and Procedures for Fire Support Coordination
4-20
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
C869 Cartridge, 81mm HE M889/M889A1 with 40
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17560 Sniper Field-Fire Range
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17610 Grenade Launcher Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17830 Light Demolition Range
Facility Code 17905 Mine Warfare Area
Facility Code 17936 Close Air Support Range
SUPPORTED MET(S): 2
EVENT COMPONENTS:
1. Conduct planning and IPB, in particular, identifying points in time/space
for decisions/passage of control of fires.
2. Conduct inspections, rehearsals, and preparations.
3. Task organize.
4. Employ reconnaissance and surveillance elements to detect enemy forces,
positions, movement, and obstacles, and submit reports in a timely manner.
5. Establish defense of designated areas, sectors, battle positions, and
surrounding key terrain features.
6. Use smoke to deceive the enemy as to the disposition of forward units and
to conceal movement during the withdrawal.
7. Position the reserve in a manner to prevent envelopment of withdrawing
forces.
8. Employ tanks and anti-tank weapons to engage enemy armor at long ranges,
counterattack enemy elements attempting to penetrate or bypass the
security force, and provide fires to assist supported units during
disengagement.
4-21
NAVMC 3500.44
16 Sep 08
CHAINED EVENTS:
INF-MAN-6133
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. MCRP 3-16.2 Techniques and Procedures for Fire Support Coordination
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17936 Close Air Support Range
Facility Code 17430 Impact Area Dudded
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17560 Sniper Field-Fire Range
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17610 Grenade Launcher Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
4-22
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 2
EVENT COMPONENTS:
1. Conduct planning, inspections, and preparation.
2. Task organize.
3. Occupy delaying positions that provide good observation, fields of fire,
and integration of all direct and indirect fires.
4. Commence the withdrawal based on time, event, or signal.
5. Establish routes/sectors, timing, and tactical control measures that
ensure deconfliction and geometry of fires.
6. Withdraw forward units simultaneously, or withdraw the least engaged units
first.
7. Send and receive required reports.
8. If under enemy pressure, plan fires in support of disengaging forward to
avoid decisive engagement.
9. Conduct coordination with higher, adjacent, and forward units to ensure
battle tracking of forward enemy trace.
10. Create a temporary mobility advantage over the enemy where required by use
of fires, obstacles, or terrain.
11. Elements use patrolling, fires, deception, and other actions as required.
12. Forward elements withdraw avoiding any complicated maneuver to mask the
withdrawal.
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17730 Fire And Movement Range
Facility Code 17830 Light Demolition Range
Facility Code 17560 Sniper Field-Fire Range
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17610 Grenade Launcher Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
4-23
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 2
EVENT COMPONENTS:
1. Conduct planning, coordination, and prepare for combat.
2. Conduct intelligence preparation.
3. Task organize.
4. Develop fire support plan.
5. Designate tactical control measures.
6. Develop insert and extraction plan (if applicable).
7. Develop deception plan, if applicable.
8. Develop emergency extraction plan and identify quick reaction force.
9. Conduct movement/actions at specified times, along specified routes, or in
designated areas.
10. Based on requirements, expected duration of reconnaissance, and available
teams, direct establishment of an execution/preparation/rest cycle to
ensure continued coverage.
11. Collect and report required information.
12. Send and receive other required reports.
13. Develop/refine information/situation as required.
14. For area reconnaissance use one of the following techniques: fan method,
converging-routes method, or successive-sectors method.
15. Conduct resupply in a manner that avoids compromise of teams.
16. Conduct debrief.
RELATED EVENTS:
INF-PAT-6143
REFERENCES:
1. FM 17-95 Cavalry
2. FM 17-97 Regimental Armored Cavalry Troop
3. FM 5-170 Engineer Reconnaissance
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
4-24
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1, 2, 3, 4, 5, 6
EVENT COMPONENTS:
1. Determine communication, electronics, and information support requirements
based on higher tasks and mission tasking, subordinate needs, propagation
and mission analysis. Include personnel and equipment support,
augmentation and liaison requirements.
2. Prioritize and allocate communication and information support as part of
an integrated command and control plan.
3. Establish communication and information control procedures, to include
controlling communication nets and information networks, security
measures, restoration priorities and efforts, maintenance, and logistical
requirements.
4. Allow for the displacement of communications and information management
capabilities, provide redundancy for critical communication or information
requirements based on the commander's guidance, ensure safe employment of
unit communication assets, and employ electronic counter measures as
required.
5. Manage communication, electronic, and information systems to allow for the
effective command and control of the unit during all phases of the
operation.
6. Receive and prepare communications status reports, supporting subordinate
unit requirements in accordance with capabilities.
RELATED EVENTS:
INF-OPS-6402 INF-COMM-8xxx
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. MCDP 6 Command and Control
3. MCWP 3-1 Ground Combat Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
4-25
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Evaluation requires higher, adjacent, and subordinate role player
support and connectivity.
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Develop mindset within unit that every Marine is a collector and must be
ready to support the intelligence effort at all times.
2. Conduct Intelligence Preparation of the Battlespace (IPB).
3. Produce Annex B of the operations order.
4. Assist/train as required to support the establishment of Company Level
Intelligence Cells (CLICs).
5. Produce and disseminate intelligence reports and receive other reports as
required.
6. Produce and deliver briefs and other intelligence products as required.
7. Produce local area maps, imagery, and products within capability, and
request products from higher headquarters.
8. Produce target packages.
9. Develop, coordinate, and manage the collection plan based on PIRs and
Specific Information Requirements (SIRs) for organic and direct support
units.
10. Make recommendations for the implementation of tactical operations to
support the collection effort.
11. Request higher support for collection requirements beyond capability of
organic assets.
12. Ensure all subordinate personnel are fully aware of the capabilities and
limitations of intelligence collection assets to include non-organic
supporting resources.
13. Employ the Intelligence Operations Workstation (IOW) to support
operations.
14. Track and update information on emerging enemy tactics, techniques, and
procedures (TTPs).
15. Rapidly process, disseminate, and exploit information gained through
Tactical Site Exploitation (TSE), tactical questioning (TQ), document
exploitation (DOCEX), and other means.
16. Ensure procedures are in place to rapidly update subordinate units and
other required personnel on required information/intelligence.
17. Enforce active and passive counterintelligence measures.
18. Publish daily changing of primary and alternate challenge and
passwords/signs and countersigns; take appropriate action if they are
compromised.
4-26
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-INT-6441
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. MCRP 2-12A Intelligence Preparation of the Battlefield (IPB)
3. MCRP 2-15.3B Reconnaissance Reports Guide
4. MCWP 2-1 Intelligence Operations
5. MCWP 2-12 MAGTF Intelligence Production and Analysis
6. MCWP 2-13 MAGTF Intelligence Dissemination
7. MCWP 2-14 Counterintelligence
8. MCWP 2-15.3 Ground Reconnaissance Operations (FMFM 2-2)
9. MCWP 2-24B Remote Sensor Operations
10. MCWP 2-26 Geographic Intelligence
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Scenario events that support evaluation of the task must be developed
and integrated into an exercise, e.g., civilian role players, enemy units,
higher collection and intelligence information.
SUPPORTED MET(S): 1, 2, 3, 4, 6
CONDITION: Given an operation order and higher fire support plan, the unit
conducts tactical operations to include: amphibious, offensive, and defensive
operations. Air, artillery, naval surface fire support (NSFS), Electronic
Warfare (EW), and organic mortars support the unit. The operations can occur
during daylight or under limited visibility conditions. The enemy has
indirect and direct fire weapons, rotary- and fixed-wing aircraft, and EW
capabilities.
STANDARD: In accordance with the higher fire support plan and unit
operations order, establishes, operates, and displaces the Fire Support
4-27
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Ensure the Fire Support Coordination Center (FSCC) is staffed and
equipped.
2. Ensure the FSCC configuration is established (both in layout and within
time limits) in accordance with unit SOPs and the references.
3. Each liaison is capable of providing technical expertise on the fire
support means he represents, and has direct communications links to that
asset.
4. Plan, establish, and operate equipment as part of a larger C4 equipment
suite.
5. Establish methods to disseminate information to subordinate elements.
6. Establish procedures to ensure requests for preplanned supporting arms
fire support and communications and non-communications jamming are made
through the appropriate channels in a timely manner, recorded and staffed
to avoid duplication, and examined to ensure proper weapons selection.
7. Establish procedures to ensure the timely receipt of the daily Air Tasking
order (ATO), submission and confirmation of artillery, mortar, and Naval
Surface Fire Support targeting lists and plans, and the coordination of
electronic attack and information operations.
8. Displaces by the appropriate method to allow continuous operation,
control, and deconfliction of fires (i.e., by forward and main echelon
displacement).
RELATED EVENTS:
INF-FSPT-8302 INF-FSPT-6302 INF-FSPT-6301
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. MCRP 3-16.2 Techniques and Procedures for Fire Support Coordination
3. MCRP 3-16.6A J-Fire, Multiservice Procedures for the Joint Application of
Fire Power
4. MCWP 3-31.6 Supporting Arms Coordination in Amphibious Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
UNITS/PERSONNEL:
1. Mortar/Artillery Unit
2. Naval Surface Fires Platform
3. Close Air Support (CAS) Aircraft/Forward Air Controller (FAC)
4. CAST - Combined Arms Staff Trainer
SUPPORTED MET(S): 1, 2, 3, 4, 6
4-28
NAVMC 3500.44
16 Sep 08
CONDITION: Given an operation order and higher fire support plan, the
battalion conducts tactical operations to include: amphibious, offensive, and
defensive operations. Air, artillery naval surface fire support (NSFS),
Electronic Warfare (EW), and organic mortars support the unit. The
operations can occur during daylight or under limited visibility conditions.
The enemy has indirect and direct fire weapons, rotary- and fixed-wing
aircraft, and EW capabilities. A Fire Support Coordination Center (FSCC) is
either established and controlling fires or preparing to assume control.
EVENT COMPONENTS:
1. Establish watch bill and reliable and uninterrupted communications on
required nets with both subordinate elements and fire support agencies
within time frame established by unit SOP after arrival on the beach
during expeditionary operations.
2. Request transfer of responsibility for control and coordination of
supporting fires during amphibious operations after communications are
established and phasing control checklists are completed.
3. Per the operation order, assume responsibility for the overall
coordination of air, naval surface fire support (NSFS), battalion mortars,
and artillery.
4. Establish, based on unit SOP and METT-TSL, if units will route requests
for fire support utilizing centralized or decentralized method.
5. Establish a common method for timing the delivery of fires within the
unit. The method established may be synchronization using either "Zulu" or
"local" time zone.
6. Maintain current status on the tactical situation and fire support
coordination measures in effect.
7. Conduct fire support coordination using the unit's Standard Operating
Procedure (SOP) and in accordance with the references.
8. Use/display graphic or electronic aids to help in fire support (FS)
coordination, i.e., attack guidance matrix or target precedence list, fire
support status chart (ammunition, location, firing capability), situation
map, overlays, fire support plan, fire support matrix, and other support
plans and ensure their timely update.
9. Ensure all FSCMs are clearly marked on fire plan overlays, and
disseminated to subordinate, higher and adjacent unit commanders.
10. Maintain/display the fire support, operations, intelligence, airspace
coordination measures, and overlays.
11. Maintain a detailed plot of friendly positions, civilian population
concentrations, activities (particularly the location of lead elements),
and places protected by the law of war.
12. Approve or deny requests for fire support, based on METT-TSL, unit SOP,
and proper fratricide avoidance techniques and weaponeering.
13. Minimize coordination problems caused by the simultaneous flight of
aircraft and the delivery of other supporting arms, by carefully
considering the location and types of targets, firing positions for
artillery and mortars, and fire support areas for naval surface fire
support ships.
4-29
NAVMC 3500.44
16 Sep 08
14. Based on the tactical situation and when appropriate, integrate air and
surface delivered fires, using either formal or informal airspace
coordination measures.
15. Coordinate with adjacent or higher units' Fire Support Coordination Center
(FSCC) if fires or the effects of those fires impact in another unit's
zone or come within the constraints imposed by the higher FSCC.
16. Provide recommendations for the changing or shifting of fire support
coordination measures, and those designated maneuver control measures
which best facilitates maneuver actions and provides safeguards to protect
friendly units.
17. Coordinate the attack of targets in the priority established in the
operations order or according to the commander's changes based on the
tactical situation.
18. Manage the flow of information in the Fire Support Coordination Center
(FSCC) so critical information is exchanged in a timely manner.
19. Integrate supporting arms by coordinating a Close Air Support (CAS)
mission and Suppression of Enemy Air Defense (SEAD) fires, if required.
20. Adjust the schedule of fires based on the advance of maneuver units,
changes in priorities, and any changes to the scheme of maneuver.
21. Respond quickly to targeting data and immediate fire support requests to
coordinate the delivery of fire support on high payoff targets.
22. Resolve fire support conflicts between elements of the landing force, as
well as conflicts between Deep Air Support (DAS)/CAS missions and indirect
fire missions.
23. Coordinate the movement of ground based fire support.
24. Maintain the status of remaining air sorties allocated, aircraft on call,
and all preplanned air missions for the next 24 hours.
25. Request additional fire support and Electronic Warfare (EW) support from
higher command and supporting forces, if required.
26. Utilize the TACP to aid in the quick response of aircraft to changes in
the tactical situation.
27. Submit and Forward the shelling reports (SHELREPs) and enemy order of
battle overlays to Counter-Fire HQ to develop counter battery and counter
mortar fire data.
28. Determine if any temporary fire support coordination measures are
required. Cancel or submit for cancellation those no longer required to
facilitate attack of targets or provide troop safety.
29. Maintain a record of targets fired on, Battle Damage Assessment (BDA)
assessed, and targets not engaged. Inform the S-2, S-3, and the command
element (Fires Journal) according to unit SOP.
30. Designate priority targets for engagement, and update these targets as the
situation changes.
31. Demonstrate the ability to displace the FSCC by echelon, without a loss of
control or degradation of support as per unit SOP.
32. Anticipate close air support (CAS) requirements, and coordinate the
assignment of air alert status.
RELATED EVENTS:
INF-FSPT-6301 INF-FSPT-8302 INF-FSPT-7301
INF-FSPT-6302
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. JOINT PUB 3-02.1 Landing Force Operations
3. JP 3-09 Joint Tactics, Techniques, and Procedures for Close Air Support
4-30
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17610 Grenade Launcher Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire and Movement Range
Facility Code 17936 Close Air Support Range
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Perform mission analysis.
2. Develop courses of action.
3. War game courses of action.
4. Compare courses of action, then present for commander's decision.
5. Develop orders.
6. Transition to produce operations plan or order.
7. Develop branches and sequels, if applicable.
4-31
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-OPS-6401
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. MCDP 5 Planning
3. MCWP 5-1 Marine Corps Planning Process
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. The unit determines the logistical requirements based on higher
headquarters' requirements and in accordance with the mission.
2. Develop a logistics plan to include: establishing delivery times or supply
points based on technique of distribution, identifying combat load and
operational equipment requirements for the unit, procedures for
maintenance and medical services, a timeline for execution, priority of
support, and inspection criteria and location.
3. The unit coordinates logistical support in a timely manner to include:
required classes of supply, method and location of distribution, motor
transportation requirements, medical service support, and maintenance
needs.
4. Conduct resupply, maintenance, and organized service support in a secure
manner, per the timeline, and to the standard and priority identified in
the plan.
5. Unit tracks maintenance status of subordinate unit equipment and
prioritizes maintenance efforts and replacements based on mission
precedence.
6. Report logistics status to higher headquarters.
CHAINED EVENTS:
INF-LOG-6410
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCDP 4 Logistics
3. MCO 3120.8A Organization of FMF for Combat
4. MCRP 3-11.2A Marine Troop Leader's Guide
5. Unit Standard Operating Procedures (SOP)
SUPPORT REQUIREMENTS:
4-32
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Coordinate convoy operations through the Unit Movement Control Center
(UMCC).
2. Develop communications plan to support convoy movements.
3. Utilize C2 systems to track convoy movement through the battlespace.
4. Designate route security procedures and allocate units to this task.
5. Establish coordination and control measures when transitioning through
multiple battlespaces.
6. Establish procedures for battle hand-off from a convoy in contact to a
maneuver element.
7. Task ISR or non-traditional ISR to provide route reconnaissance of
MSR/ASRs.
8. Plan for route clearance.
9. Plan for personnel and equipment recovery.
10. Maintain a master route status chart.
11. Conduct Movement Control Board.
RELATED EVENTS:
INF-MOBL-6150 INF-CSS-8404 INF-PAT-7145
REFERENCES:
1. MCRP 4-11.3H Multi-service Tactics, Techniques, and Procedures for
Tactical Convoy Operations
SUPPORTED MET(S): 1, 2, 3, 4, 6
4-33
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Upon receipt of subordinate unit's casualty, unit medical personnel apply
appropriate treatment.
2. Unit medical personnel conduct triage to set casualty precedence.
3. Unit reports sufficient casualty precedence information to prioritize the
evacuation effort to the appropriate facility.
4. Unit reports sufficient casualty information to identify casualty and
start the tracking and reporting process.
5. Unit ensures that disposition of casualty T/E and personal effects
disposed of in accordance with SOP and Marine Corps Orders.
6. Unit tracks casualty location and condition and updates as status changes.
7. Unit demonstrates ability to prioritize available replacements/returns to
full duty and provide them to the units.
8. Unit ensures that documentation and procedures are sufficient to complete
administrative post injury requirements (awards, notifications, etc.).
CHAINED EVENTS:
INF-MED-6430
REFERENCES:
1. MCWP 4-11.1 Health Service Support Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
EQUIPMENT:
1. Assault Support Aircraft
2. Suitable landing zone
3. Tactical vehicle(s)
4. Suitable Medical Facility
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Evaluator will tag casualties.
2. Evaluator will track casualties through the entire process.
3. This task may be trained to standard in garrison.
SUPPORTED MET(S): 1, 2, 6
4-34
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Ensure readiness to conduct operations in a CBRN environment based on
intelligence assessment of enemy intentions and capabilities.
2. Monitor/Survey teams conduct CBRN surveys.
3. Report results of the monitor/survey operations.
4. Task units to secure, isolate, and mark contaminated area.
5. Update reports with new information obtained.
6. Direct trained monitor/survey teams to monitor the environment with a
chemical agent detection equipment (chemical agent monitor/chemical agent
detector kit), radiological detection equipment and visual observation.
7. If further attacks or contamination occur or are detected, battalion COC
receives and forwards amplifying/additional information.
8. Based on tactical situation, weather/wind direction, and/or contamination,
battalion directs changes to subordinate unit formations, activities,
dispersion and/or positions to limit exposure/effects.
9. Decontaminate areas are identified and marked, and information is passed.
10. Based on size and extent of CBRN attack, assess organic capabilities for
decontamination, and request higher support, if needed.
11. Conduct immediate decontamination on any contaminated areas.
12. Treat and evacuate any casualties.
13. If the mission permits, complete operational decontamination.
14. Conduct MOPP gear exchange.
RELATED EVENTS:
INF-CBRN-6501 INF-CBRN-6504 INF-CBRN-6503
INF-CBRN-6502
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. MCRP 2-25A Reconnaissance Reports Guide
3. MCRP 3-37.2C Multi-service TTP for NBC Aspects of Consequence Management
4. MCRP 3-37A NBC Field Handbook
5. MCWP 3-37.3 NBC Decontamination (FM 3-5)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17230 Gas Chamber
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17932 Decontamination Training Site
SUPPORTED MET(S): 1, 2, 6
4-35
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Conduct intelligence preparation of the operating environment (IPOE).
2. Task organize.
3. Establish command and control.
4. Integrate joint, coalition, host nation and interagency capabilities and
organizations.
5. Exchange liaisons with joint, coalition, host nation and interagency
organizations.
6. Provide service and joint capabilities to coalition, host nation and
interagency organizations.
7. Establish Civil Military Operations Center.
8. Conduct intelligence, surveillance and reconnaissance (ISR) to develop
intelligence on insurgent activity and the local population.
9. Establish control over the area of operations.
10. Control, direct, coordinate, approve, modify or deny employment of organic
and supporting arms.
11. Establish detention facilities and conduct detainee operations.
12. Secure key terrain, infrastructure and individuals.
13. Kill or capture high value targets.
14. Commence detailed clearing of the objective area.
15. Complete actions on the objective.
16. Secure lines of communication leading into or out of the cleared area.
17. Implement population and resource control (PRC) measures.
18. Conduct targeting of remaining active insurgents.
19. Target insurgent support structures.
20. Target key individuals and organizations for engagement.
21. Disrupt insurgents outside of cleared area.
22. Conduct the full spectrum of information operations (PSYOP, MILDEC, OPSEC,
EW, CNA).
RELATED EVENTS:
INF-MAN-8111 INF-STAB-8604 INF-STAB-8605
INF-STAB-8606 INF-STAB-8607 INF-COIN-8702
INF-COIN-8704 INF-COIN-8705 INF-FID-8801
INF-FID-8802 INF-FID-8803
REFERENCES:
1. FM 6-20-50 Fire Support for Brigade Operations (Light)
2. FMFRP 12-15 Small Wars Manual
3. MCWP 3-33.5 Counterinsurgency Operations
SUPPORTED MET(S): 1, 2, 6
4-36
NAVMC 3500.44
16 Sep 08
STANDARD: To separate the insurgents from the populace and deny them safe
haven.
EVENT COMPONENTS:
1. Conduct intelligence preparation of the operating environment (IPOE).
2. Establish command and control.
3. Task organize for combined operations with HN security organizations.
4. Integrate joint, coalition, host nation and interagency capabilities and
organizations.
5. Exchange liaisons with joint, coalition, host nation and interagency
organizations.
6. Provide service and joint capabilities to coalition, interagency and host
nation organizations.
7. Maintain a Civil Military Operations Center.
8. Maintain a persistent intelligence, surveillance and reconnaissance (ISR)
capability to develop intelligence on insurgent activity.
9. Control, direct, coordinate, approve, modify or deny employment of organic
and supporting arms.
10. Conduct combined action where feasible.
11. Assign combined forces geographic responsibility where feasible.
12. Transition U.S. positions, checkpoints and responsibilities to combined
forces where feasible.
13. Conduct combined/HN civil military operations.
14. Transition detention facilities and the conduct of detainee operations.
15. Kill or capture high value targets.
16. Transition responsibility for securing lines of communication leading into
or out of the cleared area.
17. Modify population and resource control measures as appropriate.
18. Conduct targeting of remaining active insurgents.
19. Target insurgent support structures.
20. Target key individuals and organizations for engagement.
21. Disrupt insurgents outside of the cleared area.
22. Conduct the full spectrum of information operations (PSYOP, MILDEC, OPSEC,
EW, CNA).
23. Minimize U.S. presence and promote local HN security organizations.
24. Assign HN security forces geographic responsibility where feasible.
25. Transition combined positions, checkpoints and responsibilities to HN
forces where feasible.
26. Provide selective access to coalition enablers.
27. Transition population and resource control measures to HN authority.
28. Transition all security responsibilities to HN forces and authority when
HN security and governance capacity is proven capable of managing internal
threats to stability.
RELATED EVENTS:
INF-STAB-8604 INF-STAB-8606 INF-STAB-8607
INF-COIN-8701 INF-COIN-8704 INF-COIN-8705
INF-FID-8801 INF-FID-8802 INF-FID-8803
4-37
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 3-07 Stability Operations and Support Operations
2. FMFRP 12-15 Small Wars Manual
3. MCWP 3-33.5 Counterinsurgency Operations
SUPPORTED MET(S): 1, 2, 6
EVENT COMPONENTS:
1. Establish a secure environment.
2. Assess local governance capacity, limitations and employment
considerations.
3. Coordinate security and life support requirements in support of local
civil authorities operating in the battlespace.
4. Identify the needs of the local civil authorities in terms of security,
economics, education and public information, food and agriculture,
governance, health and welfare, infrastructure, and rule of law.
5. Identify the root causes of instability.
6. Identify high impact/quick return projects which contribute towards
resolving the root causes of instability and develop local capacity.
7. Develop a campaign plan to resolve or mitigate the root causes of
instability and support the development of local capacity.
8. Assist local authorities in controlling military and police activities.
9. Assist in establishing and enforcing the rule of law.
10. Advise local host nation authorities on public administration.
11. Assist in the development of a Justice system (a judiciary system,
prosecutor/defense representation, and corrections).
12. Facilitate the execution of civil information responsibilities.
13. Perform liaison functions between local military and civilian agencies.
14. Coordinate and synchronize activities of other government agencies
involved in establishing civil control.
15. Assist in the mediation of problems arising from the temporary cessation
of normal local governmental functions.
16. Support post-conflict elections.
17. Assist in the development of disaster preparedness and response.
18. Transition local governance to legitimate HN authority.
REFERENCES:
1. FM 3-05.40 Civil Affairs Operations
2. FM 3-07 Stability Operations and Support Operations
3. JP 3-08 Interagency, Intergovernmental Organization, and Nongovernmental
Organization Coordination during Joint Operations, Vol I and II
4. MCRP 3-33.1A Civil Affairs Operations
5. MCWP 3-33.5 Counterinsurgency Operations
4-38
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1, 2, 6
EVENT COMPONENTS:
1. Secure lines of communication leading into and out of the cleared area.
2. Conduct a census.
3. Implement an Identification Card System (e.g. Biometrics).
4. Establish curfews.
5. Enforce a pass system.
6. Establish mechanisms and enforce limits on the length of time people can
travel.
7. Establish mechanisms and enforce limits on the number of visitors from
outside the cleared area combined with a requirement to register them with
local security forces or civil authorities.
8. Establish checkpoints along major routes to monitor and enforce compliance
with population control measures.
9. Establish control over key resource storage and distribution sites (water,
fuel, food).
RELATED EVENTS:
INF-STAB-8604 INF-STAB-8602 INF-STAB-8603
INF-STAB-8605 INF-COIN-8702
REFERENCES:
1. FM 3-07 Stability Operations and Support Operations
2. FMFRP 12-15 Small Wars Manual
3. JP 3-57 Joint Doctrine for Civil Military Operations
SUPPORTED MET(S): 1, 2, 6
4-39
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Explain to the population the purpose of operations.
2. Shape expectations.
3. Highlight successes.
4. Communicate requirements and purpose of population control measures.
5. Favorably influence perceptions of HN legitimacy and capabilities.
6. Obtain local support for combined and counterinsurgency operations.
7. Publicize insurgent violence.
8. Discredit insurgent propaganda and provide a more compelling alternative
to the insurgent ideology and narrative.
9. Persuade insurgents to turn themselves in or quit the insurgent
organization.
REFERENCES:
1. FM 3-07 Stability Operations and Support Operations
2. FMFRP 12-15 Small Wars Manual
SUPPORTED MET(S): 1, 2, 6
EVENT COMPONENTS:
1. Conduct IPOE to identify threat networks operating in and around RCT/BN
AOs.
2. Establish command and control.
3. Determine how the threat networks function as systems.
4. Determine desired effects, objectives and end state with respect to threat
networks.
5. Develop a concept of operations to achieve desired end state.
6. Determine measures of effectiveness/performance (MOE/P).
7. Task organize for AtN operations.
8. Integrate host nation security and intelligence efforts into AtN
operations.
9. Employ systematic all-source intelligence collection/analysis capabilities
to identify and locate key threat cell structures.
10. Employ biometrics to facilitate targeting of threat cell members.
11. Implement population and resource control measures to isolate threat cells
and deny freedom of movement.
4-40
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-INT-7203 INF-FSPT-8302
REFERENCES:
1. FM 2-0 Intelligence
2. MCDP 1-0 Marine Corps Operations
3. MCRP 2-3A Intelligence Preparation of the Battlefield
4. MCWP 2-1 Intelligence Operations
5. MCWP 3-1 Ground Combat Operations
6. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
7. MCWP 3-33.5 Counterinsurgency Operations
8. MCWP 5-1 Marine Corps Planning Process
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task is broad in nature and is designed to encompass the
requirements for various types of offensive attacks against a threat
network. Guiding principles include: Attack Cohesion, Attack Popular
Support, Attack Support Structure, Attack Command & Control, Create Net-
Centric capabilities, and Create Multi-Discipline Analytical Stare. Key
objectives are: Security for the Populace, Developing Targeting Packages
and Products, Understand Rapid Evolving Operational Picture, and to Fully
Leverage National Intelligence, C2, technology and Science to Defeat threat
networks.
2. Potential Attack the Network enablers include: (EOD, Combined
Explosive Exploitation Cells (CEXC), Weapons Intelligence Teams (WIT), C-
IED Targeting Program Cells (CITP), C-IED Operations Integration Center
(COIC), Operations Research Systems Analyst Team (ORSAT), Electronic
Warfare Officer/Electronic Counter Measures (EWO/ECM), FOX Team, Route
Clearance and Sensitive Site Exploitation Teams, MWD (Explosive
Detector/Specialized Search/Combat Tracker).
SUPPORTED MET(S): 6
4-41
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Conduct planning and IPB, in particular identifying points in time/space
for decisions/passage of control of fires.
2. Conduct appropriate pre-combat preparations, rehearsals, checks, and
inspections.
3. Task organize for urban operations.
4. Coordinate with adjacent, supporting and attached units.
5. Conduct reconnaissance.
6. Assess demographics/population factors.
7. Ensure subordinate units incorporate rules of engagement into operations.
8. Develop fire support plan, tactical control measures, routes and urban
specific factors and restrictions.
9. Determine/coordinate key terrain labeling.
10. Conduct, coordinate, and complete the fire support/targeting process.
11. Direct and task subordinate units in the conduct of movement and tactics
in the four levels of urban terrain.
12. Establish target precedence, consider effects for all weapon systems, and
assess collateral damage.
13. In conjunction with higher headquarters, track progress of enemy
reinforcements, activities or enemy higher echelons/reserves.
14. Establish redundant communications plan and position retransmission sites
as required.
15. Ensure standardization of signals and marking throughout the battalion.
16. Isolate the objective.
17. Control, direct, clear, coordinate, deny, or modify employment of organic
and supporting arms.
18. Gain a foothold in limited objectives.
19. Conduct clearing and marking.
20. Complete actions on the objective.
21. Send and receive required reports.
22. Evacuate casualties, process detainees, and conduct logistic operations.
23. Issue fragmentary orders to units in preparation for follow-on missions.
24. Conduct continuous engagement/interaction with locals to support
operations and gain actionable intelligence.
RELATED EVENTS:
INF-MOUT-6801
REFERENCES:
1. FM 90-10-1 Infantryman's Guide to Combat in Built-Up Areas
2. FMFM 6-4 Marine Rifle Company/Platoon
3. MCWP 3-11.2 Marine Rifle Squad
4. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17963 MOUT Collective Training Facility (Large)
4-42
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 3
EVENT COMPONENTS:
1. Assess host nation security force capabilities.
2. Identify training requirements.
3. Establish a training cadre.
4. Establish training standards for HN security forces.
5. Determine methods of training host-nation security forces (formal schools,
mobile training teams, partnership training, advisory teams, embedded US
personnel in key positions, contractors).
6. Work with host nation government agencies to locate or build proper
training facilities, to include contracted life support agencies.
7. Identify equipment requirements and purchase / request any shortfall
items.
8. Develop course materials and assign instructors.
9. Establish force protection measures for HN forces in training.
10. Implement training plans.
11. Transition training to host nation authority.
RELATED EVENTS:
INF-COIN-7701 INF-COIN-7704 INF-COIN-7705
INF-COIN-8701 INF-FID-8802 INF-COIN-8705
INF-FID-8801 INF-FID-8803 INF-FID-7803
INF-COIN-8704
REFERENCES:
1. FM 3-05.137 Army Special Operations Forces Foreign Internal Defense
2. FM 3-07 Stability Operations and Support Operations
3. MCIP 3-33.01 Small Unit Leader's Guide to Counterinsurgency
4. MCWP 3-33.5 Counterinsurgency Operations
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Military Training. The following is a list of potential military
training requirements:
a. Train in basic day night patrolling.
b. Train in weapons employment.
c. Train in communications.
d. Train in basic intelligence functions.
e. Train in coordination of indirect fires.
f. Train in providing effective medical support.
g. Train in law of armed conflict.
4-43
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 3
EVENT COMPONENTS:
1. Determine method for advising foreign military forces (embedded training
4-44
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-COIN-8701 INF-COIN-8704 INF-COIN-8705
INF-FID-8801 INF-FID-8803 INF-COIN-7701
INF-COIN-7704 INF-COIN-7705 INF-FID-7802
INF-FID-8802
REFERENCES:
1. FM 3-05.137 Army Special Operations Forces Foreign Internal Defense
2. FM 3-07 Stability Operations and Support Operations
3. MCIP 3-33.01 Small Unit Leader's Guide to Counterinsurgency
4. MCWP 3-33.5 Counterinsurgency Operations
5. TC 31-73 Special Forces Advisor Guide
SUPPORTED MET(S): 4
CONDITION: The unit comprises the Ground Combat Element (GCE) of an embarked
MAGTF that has been directed to participate in amphibious operations. The
Amphibious Force is currently in transit. Higher headquarters has received
an initiating directive/warning order and has issued a planning
directive/warning order based on the initial planning conference.
EVENT COMPONENTS:
1. Conduct mission analysis.
2. Develop preliminary estimates based on the warning order and general
planning guidelines provided by the higher commanders.
3. Formulate information requirements and recommend Priority Intelligence
Requirements (PIRs) for the commander. Identify intelligence gaps to
4-45
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-EXPO-6901 INF-EXPO-8901 INF-EXPO-7902
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. JOINT PUB 3-02.1 Landing Force Operations
3. JP 3-02 Joint Doctrine for Amphibious Operations
4. MCDP 3 Expeditionary Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17330 Covered Training Area
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
SUPPORTED MET(S): 4
4-46
NAVMC 3500.44
16 Sep 08
CONDITION: The unit comprises the Ground Combat Element (GCE) of an embarked
MAGTF and is in receipt of the MAGTF concept of operations and has developed
a plan of attack that has been approved. Assault craft, to include assault
support, landing craft and amphibious vehicles are available and have been
assigned. The Amphibious Force is currently in transit.
STANDARD: The unit comprises the Ground Combat Element (GCE) of an embarked
MAGTF and is in receipt of the MAGTF concept of operations and has developed
a plan of attack that has been approved. Assault craft, to include assault
support, landing craft and amphibious vehicles are available and have been
assigned. The Amphibious Force is currently in transit.
EVENT COMPONENTS:
1. Determine requirements for the ship-to-shore movement in coordination with
a review of the amphibious vehicle availability table, helicopter
availability table, and the landing craft availability table.
2. Consider enemy capabilities to counter surface and/or air assaults.
3. Assign elements to one of five categories in order to indicate their
relative priority for landing and to facilitate control of the ship-to-
shore movement.
4. Ensure the development of the landing plan is totally integrated with the
initial scheme of maneuver and fire support plan, and provide for the
rapid buildup of automatic and crew served weapons during the initial
phase of the assault.
5. Allocate assets for use by subordinate elements, and ensure the proposed
landing diagram, assault schedule, and landing sequence table are
developed concurrently and are mutually compatible, and forward these
documents to the MAGTF commander for approval/consolidation.
6. Serial Assignment Table is based on the task organization for the landing;
balances unit integrity and combat spread loading of critical personnel
and equipment; and is forwarded to the MAGTF commander for approval.
7. Landing Craft and Amphibious Vehicle Assignment Table is coordinated with
the affected units, compatible with the previously approved landing plan
documents, provides for the rapid buildup of firepower (crew served
weapons), and maintains the tactical integrity required by the plan of
attack.
8. Helicopter Employment and Assault Landing Table and the Heliteam Wave and
Serial Assignment Table is coordinated with the ACE and MEU CE, compatible
with the previously approved landing plan documents, provides for the
rapid buildup of firepower in the zone (crew served weapons), and
maintains the tactical integrity required by the plan of attack.
9. Provide input for the development of the Approach Schedule.
10. Develop debarkation schedule, when applicable, and ensure its distribution
to all personnel responsible for the control of debarkation.
11. Publish the landing plan as Appendix 3 to Annex R of the landing force
operation order. Only those documents required by the unit are included as
tabs to the appendix.
12. Develop alternate plans to cover foul weather interference and/or changes
in enemy capabilities.
13. Assign adequate personnel to the Tactical-Logistical Group (TACLOG) to
advise MAGTF and Navy control personnel on the location of troops,
equipment, supplies, landing requirements, and of adjustments to the
landing sequence.
4-47
NAVMC 3500.44
16 Sep 08
14. Coordinate planning with MAGTF command element for pre D-Day transfers of
units and equipment.
RELATED EVENTS:
INF-EXPO-6901 INF-EXPO-8901 INF-EXPO-7901
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. JOINT PUB 3-02.1 Landing Force Operations
3. JP 3-02 Joint Doctrine for Amphibious Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17330 Covered Training Area
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
SUPPORTED MET(S): 4
CONDITION: Given the order to land the landing force, and having prepared
and issued an operations order, the unit has the assault amphibious vehicles,
landing craft, and helicopter operational readiness rates equal to the
numbers anticipated in the final version of the MAGTF landing plan developed
after the final rehearsal. Close, continuous, and detailed coordination
among the CATF, MAGTF, GCE, ACE, and CSSE staff members, as well as unit
commanders, has occurred throughout the entire planning process.
EVENT COMPONENTS:
1. Receive and disseminate the intelligence updates to subordinate units.
2. Landing/assault craft teams and heliteams are assembled, staged, and
prepared for debarkation/enplanement.
3. Accomplish debarkation of initial assault elements on schedule.
4. Unit transitions command ashore to maintain continuous control of the
operation. Unit commanders quickly gain/regain control of their units upon
landing, and maintain momentum of the attack by avoiding unnecessary delay
in the zone/beach.
5. Coordinate and adjust the employment of forces as the situation develops
and changes, integrating maneuver and fires.
6. Establish and maintain communications ashore.
4-48
NAVMC 3500.44
16 Sep 08
CHAINED EVENTS:
INF-EXPO-6902
RELATED EVENTS:
INF-EXPO-6901 INF-EXPO-8901 INF-EXPO-7902
INF-EXPO-7901
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. JOINT PUB 3-02.1 Landing Force Operations
3. JP 3-02 Joint Doctrine for Amphibious Operations
4. MCDP 3 Expeditionary Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
Facility Code 17908 Amphibious Vehicle Training Area
Facility Code 17909 Ship Loading and Unloading Mockup
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Event scenario includes opposition forces that introduce friction and
require the landing force to make adjustments throughout the assault.
2. Appropriate blank ammunition is required.
SUPPORTED MET(S): 4
4-49
NAVMC 3500.44
16 Sep 08
among the CATF, MAGTF, GCE, ACE, and CSSE staff members, as well as unit
commanders, has occurred throughout the entire planning process.
EVENT COMPONENTS:
1. Establish defense of embarkation area and surrounding key terrain
features.
2. Use smoke to deceive the enemy as to the disposition of landing force
units and to conceal movement during the withdrawal.
3. Prior to embarkation, position the reserve in a manner to prevent
envelopment of withdrawing forces.
4. Employ tanks and anti-tank weapons to engage enemy armor at long ranges,
counterattack enemy elements attempting to penetrate or bypass the
security force, and provide fires to assist supported units during
disengagement.
5. Use indirect air and surface delivered fires to cover loading areas by
long-range harassing and interdiction fire, support the security force,
and provide fires to assist supported units during disengagement.
6. Commander of the security force issues specific instructions regarding the
destruction of supplies and equipment that cannot be evacuated and fixes
responsibility for their destruction.
7. Security force takes the enemy under fire as soon as they are within
effective range of available weapons.
8. Defend each delay position until the enemy actions threaten decisive
engagement.
9. Initiate withdrawal to the next delay position, per prearranged plans or
engagement.
10. Security force executes orderly withdrawal along designated routes to the
next delay position. It continues to provide maximum delay between
positions using maneuver, available terrain, long-range fires, tactical
air, mines, and demolitions.
11. Exploit opportunities to inflict heavy casualties on the enemy by
offensive action when consistent with the overall mission of the security
force and the movement schedule.
12. Consider the limited objective counterattacks to gain additional time or
to extricate units that have become decisively engaged.
13. Hold the number of vehicles brought forward to a minimum consistent with
the requirement. Move all vehicles not needed in forward areas to the rear
on prescribed routes, per the movement plan.
14. Ensure withdrawing units execute orderly movement along prescribed routes
at times designated in the movement schedule, and occupy assembly areas
for the briefest possible period.
15. Close coordination between the security force and the forces being
withdrawn, in order to permit the smooth flow of units into the
embarkation area with minimum interference to the security force and its
supporting arms.
4-50
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-EXPO-6901 INF-EXPO-8901 INF-EXPO-7901
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. JOINT PUB 3-02.1 Landing Force Operations
3. JP 3-02 Joint Doctrine for Amphibious Operations
4. MCDP 3 Expeditionary Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
Facility Code 17908 Amphibious Vehicle Training Area
Facility Code 17909 Ship Loading And Unloading Mockup
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Event scenario includes opposition forces that introduce friction and
require the unit to make adjustments throughout the withdrawal.
4-51
NAVMC 3500.44
16 Sep 08
CHAPTER 5
PARAGRAPH PAGE
5-1
NAVMC 3500.44
16 Sep 08
CHAPTER 5
5001. ADMINISTRATIVE NOTES. T&R events are coded for ease of reference.
Each event has a 4-4-4 digit identifier. The first four digits represent the
occupational field, "INF". The second four digits represent the functional
or duty area (e.g. Fire Support Planning (FSPT), Communications (COMM),
etc.). The last four digits represent the level, and identifier number of
the event. The company collective events are only in the 6000 level. Every
event has a unique identifier number from 001 to 999.
5-2
NAVMC 3500.44
16 Sep 08
5-3
NAVMC 3500.44
16 Sep 08
5-4
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Search detainees for weapons and ammunition, items of intelligence value,
and other inappropriate items. The search should include all clothing on
the individual, to include shoes. To ensure the safety and security of
the capturing force, do not exempt anything from search.
2. Photograph scenes of intelligence or judicial value.
3. Tag detainees with a DD Form 2745 (Capture Tag) or a field-expedient
capture tag that includes the following information: date and time of
capture, capturing unit, location of capture (grid coordinates), special
circumstances of capture (how the person was captured, if the detainee
resisted, if the detainee surrendered, and so forth), did the person have
weapons on them at the time of capture, list all documents and other items
on their person at the time of capture.
4. Report number of personnel detained. Initiate coordination for
transportation of detainees to a detainee collection point (DCP).
5. Evacuate to a DCP. Deliver all documents/pocket litter captured with the
detainee(s) in order to assist interrogators.
6. Segregate detainees based on perceived status of authority or position.
During initial screening, identify leaders and segregate them from the
remainder of the population.
7. Safeguard detainees according to applicable international customary and
conventional law and US policy, law, and/or regulations. Provide medical
care as needed.
8. Complete appropriate documentation in accordance with local theater
guidance.
CHAINED EVENTS:
INF-MAN-5101
REFERENCES:
1. MCRP 4-11.8C Enemy Prisoners of War and Civilian Internees
2. MCRP 4-11.8D Detainee Operations
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
M023 Charge, Demolition Block M112 1-1/4
5-5
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17904 Prisoner Of War Training Area
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. An event scenario must be provided that incorporates requirements to
facilitate training to standard.
2. The acronym STRESS (Search, Tag, Report, Evacuate, Segregate, and
Safeguard) has replaced the 5 S's &T (Search, Segregate, Silence, Speed,
Safeguard, and Tag).
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Unit leader reports the obstacle to higher headquarters.
2. The lead element (individuals) occupies the best available position to
overwatch the obstacle. The remainder of the unit maintains local
security.
3. Conduct leader's reconnaissance and designate a breach point.
4. Suppress the enemy.
5. Employ obscuration smoke to conceal breach effort and movement.
6. Breach element moves to the breach point using available cover and
concealment and conducts an inspection for and marks any booby traps.
7. Barriers, wire or other obstacles are breached.
8. Mark unexploded mines.
9. Unit clears the breach lane, conducts a limited assault/security beyond
the breach, and conducts a search for mines and booby traps.
10. Mark the route to the breach, the breach lane, and the route beyond the
obstacle. If breach will be used at night (or limited visibility), mark
accordingly.
11. Remove/Destroy or clearly mark all remaining mines.
12. Remaining elements move through the breach.
13. Reports to higher headquarters the location of the breach.
RELATED EVENTS:
INF-MAN-5102
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCWP 3-11.2 Marine Rifle Squad
5-6
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct coordination and planning between higher headquarters, both
stationary and moving unit, as well as all other supporting units and fire
support agencies.
2. Employ all means to ensure common view of battle space and operation and
passage of information, to include but not limited to: co-location of
command groups and exchange of liaison personnel at all levels.
3. Exchange all required intelligence and tactical information.
4. Establish graphic control measures (start points, contact points, passage
lanes, passage points, release points) and coordinate with all units
involved in the passage.
5. Coordinate/identify when and where battle handover/passage of command will
occur.
6. Arrange for leader's reconnaissance of passage area and forward battle
space by elements of the moving unit.
7. Stationary unit selects and marks passage lanes/points/areas, and
positions personnel to guide moving unit.
8. Establish priorities for use of routes and resources.
9. The stationary unit controls/delivers supporting fires prior to, and until
battle handover/passage of command.
10. Conduct continual coordination during movement and passage to include
marking/identification of moving unit's lead and rear trace.
11. At identified release points, moving unit commanders re-assume control of
their units.
12. Moving unit assumes responsibility for control of fires and battle space
from stationary unit at the planned/coordinated time/place.
13. Coordination conducted with higher headquarters and between passing units
to limit enemy observation and awareness of passage of lines.
5-7
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-MAN-7103
REFERENCES:
1. FM 17-95 Cavalry
2. FM 17-97 Regimental Armored Cavalry Troop
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Establish initial security plan.
2. Conduct map reconnaissance and identify tentative positions.
3. Organize a quartering party and reconnoiter the tentative assembly area.
4. Conduct movement to identified areas, guided by quartering party.
5. Assign and occupy sectors that ensure mutual support and cover all gaps by
observation and fire.
6. Set and conduct priorities of work.
7. Refine security plan.
8. Coordinate with higher and adjacent units.
9. Send and receive required reports.
CHAINED EVENTS:
INF-MAN-5105
RELATED EVENTS:
INF-MAN-7105
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-11.2 Marine Rifle Squad
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
5-8
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1
STANDARD: Unit leaders maximize the use of all direct and indirect weapons to
support the supported unit. The unit completes the overwatch or effectively
supports the maneuvering unit, makes necessary adjustments to the plan as the
situation develops and changes, achieves the commander's intent. Unit
prepares for follow-on missions at the conclusion of the attack.
EVENT COMPONENTS:
1. Reconnoiter the tentative position and the routes to it.
2. Ensure the position provides observation of the objective and overwatch of
the assault element.
3. Ensure position enables the support element to place suppressive fire on
the objective.
4. Assign positions, sectors of fire, and other fire control measures (TRP,
FPL, rates of fire, target engagement criteria and priorities, etc.)
5. Maintains continuous communications with, and if possible, observation of
the assault element and its route.
6. Alerts the assault element of any detected/observed enemy or changes in
situation.
7. Initiates, lifts or shifts fire on signal or when the assault begins in
accordance with standard operating procedures or operations order.
CHAINED EVENTS:
INF-MAN-5106
REFERENCES:
1. FM 3-22.27 MK19 40MM Grenade Machine Gun MOD 3
2. FM 3-22.65 Browning Machinegun Caliber .50 HB, M2
3. FM 3-22.68 Light and Medium machineguns
4. FMFM 6-4 Marine Rifle Company/Platoon
5. MCWP 3-11.2 Marine Rifle Squad
6. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
5-9
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1
CONDITION: Given a unit conducting a tactical movement that has either been
observed or engaged by enemy forces.
EVENT COMPONENTS:
1. React in accordance with rehearsed battle drills, Standard Operating
Procedures (SOPs), and commander's guidance.
2. Elements observing or in contact with enemy forces assume covered and
concealed positions and report to adjacent and higher units.
3. Elements observing or in contact with enemy forces employ all available
direct and indirect fires to gain fire superiority.
4. Send and receive an initial SITREP.
5. Determine the enemy's location and disposition.
6. Conduct an assessment of the situation and issue a verbal fragmentary
order that specifies an objective and provides control measures.
7. Develop and execute a hasty fire support plan to support the scheme of
maneuver.
8. Elements in contact maintain situational awareness of friendly positions
to avoid fratricide in a chaotic and developing situation.
9. Avoid decisive engagement with a superior force, if applicable.
10. While maintaining pressure on the enemy, evacuate casualties and process
detainees.
11. Consolidate, reorganize, and submit reports.
CHAINED EVENTS:
INF-MAN-5107
RELATED EVENTS:
INF-MAN-7107
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
5-10
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct planning of factors relevant to the patrol to include tactical
control measures and fire support plan.
2. Conduct inspections, rehearsals, and preparation.
3. Task organize.
4. Issue order.
5. Coordinate with adjacent, attached, and supporting units.
6. Occupy assembly area and conduct forward unit coordination.
7. Depart friendly lines.
8. Coordinate and conduct movement at specified times and along specified
routes.
9. Conduct directed actions during the patrol.
10. Employ supporting arms as required.
11. Establish patrol base, if applicable.
12. Send and receive required reports.
13. Employ patrol battle drills for given situations.
14. Complete actions on the objective/mission requirements.
15. Conduct re-entry of friendly lines/extraction from patrolling area.
16. Conduct patrol debrief.
RELATED EVENTS:
INF-MAN-5109
REFERENCES:
1. MCWP 3-11.3 Scouting and Patrolling
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
5-11
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Patrol halts a sufficient distance from tentative patrol base.
2. Establish 360-degree security. The security team provides a contingency
plan to the main body.
3. The security team reconnoiters the patrol base.
4. The security team checks the patrol base for suitability and to ensure no
enemy is near.
5. A portion of the security team remains in the patrol base while the
remainder returns to the main body.
6. The security team brings the rest of the unit forward.
7. The rear security element camouflages the trail from the security position
to the patrol base.
8. Occupy the patrol base by deploying in a controlled manner and
establishing a perimeter defense.
9. Use only one point of entry and exit.
10. Establish temporary observation posts. At a minimum, establish an
observation post to observe the route the unit used to enter the patrol
base.
11. Conduct reconnaissance to the limits of the unit's direct fire weapons to
identify any signs of enemy activity, suitable observation post locations,
possible rally points, withdrawal routes, and dead space.
12. Designate withdrawal routes, rally points, alternate patrol base, and
observation post positions.
13. Conduct priorities of work.
14. Emplace early warning devices on avenues of approach.
15. Develop a fire plan sketch.
16. Establish communications with higher headquarters, OPs, and throughout the
unit.
17. Send and receive required reports.
18. Permit only necessary movement within the patrol base.
19. Continuously enforce noise, light, camouflage discipline, and rest plan.
20. Conduct command post operations within the patrol base. Leaders in the
patrol base continue to plan and prepare for the mission and units conduct
patrols.
21. Establish an alternate patrol base that is occupied in the same manner as
the primary patrol base.
22. After departure, remove or conceal all signs of the unit's presence.
RELATED EVENTS:
INF-MAN-5109
REFERENCES:
1. MCWP 3-11.3 Scouting and Patrolling
5-12
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct coordination and planning between higher headquarters, both
stationary and relieving unit, as well as all other supporting units and
fire support agencies.
2. Employ all means to ensure common view of battle space and operations and
passage of information, to include but not limited to: co-location of
command groups and exchange of liaison personnel at all levels.
3. Exchange all required intelligence and tactical information.
4. Coordinate/identify when and where battle handover/passage of command will
occur.
5. Provide an operations overlay and a copy of the fragmentary order to the
relieving unit.
6. Conduct detailed coordination and liaison between representatives of fire
support units in support of both units at the command post (CP)/combat
operations center (COC) of the stationary unit.
7. Provide fire plan sketches or overlays to the relieving units.
8. Maintain security and communications at normal levels.
9. Conduct the movement of units over planned routes, based on the planned
sequence of movement and relief.
10. Maintain noise and light discipline and the dispersion of forces
throughout movement.
11. Use guides to lead relieving units into positions and to lead relieved
units out of position.
12. Relieve local security units last.
13. Keep fire support assets in position throughout the relief of maneuver
units. Ensure they are prepared to support both units.
14. Keep liaison personnel in position until the relieving unit has assumed
control.
15. Ensure that at every level down to and including the individual Marine,
face-to-face briefs are conducted.
16. Conduct familiarization and combined operations to ensure relieving unit
readiness to assume mission, if applicable.
17. Relieve crew-served weapons personnel after rifle units.
18. Use assembly areas that provide cover and concealment and are large enough
to allow for the dispersion of units.
19. Maintain all-around security throughout the entire relief of units.
20. Account for all personnel, supplies, and equipment.
21. Execute tactical deception during the relief.
5-13
NAVMC 3500.44
16 Sep 08
22. Relinquish responsibility for the area upon agreement by the two
commanders and after approval from the higher commander.
23. Send and receive required reports.
24. Coordinate the transfer or exchange of supplies and equipment to include:
communications, wire lines, radio antennas, and petroleum, oils, and
lubricants (POL).
RELATED EVENTS:
INF-MAN-7110
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct planning, inspections, rehearsals, and preparations.
2. Task organize.
3. Employ reconnaissance and surveillance elements to detect enemy forces,
positions, movement, and obstacles, and submit reports in a timely manner.
4. Initiate preparatory fires, if applicable.
5. Occupy assembly area.
6. Cross the line of departure (LD) at the specified time.
7. Employ appropriate formations and tactics to approach the objective.
8. Bypass or rapidly breach obstacles encountered enroute to the objective.
9. Occupy attack position and conduct final preparations and leader's
reconnaissance.
10. Use/coordinate indirect and direct fires to suppress enemy during final
maneuver to objective and to gain and maintain fire superiority during the
assault.
11. Leaders position themselves to observe and assess fires/suppression, and
control timing, distribution, and rates of fire to best integrate fire and
maneuver.
12. Position crew-served weapons, maximizing the effectiveness of their fires
with respect to the target/ground.
13. Employ supporting arms to engage targets of opportunity.
14. Displace crew-served weapons to provide continuous support.
15. Establish communications/signal plan for initiation, shifting, and ceasing
of fires.
16. Treat and evacuate casualties.
17. Handle detainees.
5-14
NAVMC 3500.44
16 Sep 08
CHAINED EVENTS:
INF-MAN-5111
RELATED EVENTS:
INF-MAN-6112 INF-MAN-6114 INF-MAN-6115
INF-MAN-7111 INF-MAN-6117 INF-MAN-6118
INF-MAN-6120 INF-MAN-6116
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Range must support all company weapons and attached weapons, to include
dud-producing ordnance and overhead fires.
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct planning, inspections, rehearsals, and preparations (to include
plan for fires and illumination).
2. Task organize.
3. Occupy assembly area.
4. Maintain strict noise and light discipline at all times.
5. Employ reconnaissance and surveillance, ideally prior to hours of
darkness, to detect enemy forces, positions, movement, and obstacles, and
5-15
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-MAN-6111 INF-MAN-7111 INF-MAN-5111
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
Facility Code 17430 Impact Area Dudded
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Range must support all company weapons and attached weapons, to include
dud-producing ordnance and overhead fires.
5-16
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct intelligence preparation necessary to allow for precise planning.
2. Organize raid force into functional groups/elements, each tailored to
carry out essential tasks (normally: command, reconnaissance, support,
assault, security, and reserve).
3. Develop a scheme of maneuver that is simple, detailed, and clearly
understood by all.
4. Conduct fire support planning, and establish control measures that
maximize detail, precision, and surprise.
5. Develop contingency plans for premature detection.
6. Conduct rehearsals and preparations to address all contingencies and
alternate plans.
7. Identify Go/No Go criteria, abort-decisions during movement to objective,
and decision points to execute alternate plans.
8. Considering the situation and time available back plan from actions on the
objective to develop a scheme of maneuver that includes withdrawal (and
insert/extract means if appropriate).
9. Infiltrate to the objective.
10. Isolate the objective.
11. Conduct actions on the objective.
12. Before the enemy has time to react, withdraw along specified routes, in a
specified sequence, with identified elements and/or fires used to
cover/delay.
13. Send and receive required reports.
14. Ensure accountability of all personnel and equipment throughout the raid.
15. Conduct debrief.
CHAINED EVENTS:
INF-MAN-5113
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. FMFM 7-32 Raid Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17670 Mortar Range
5-17
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Amphibious raids will include detailed planning, coordination, and
rehearsals with Navy and other designated personnel for the conduct of
ship-to-shore surface or air movement. Specific procedures, requirements,
factors, control measures, and expertise for specific amphibious insertion
techniques will be required.
2. Range must support all company weapons and attached weapons, to include
dud-producing ordnance and overhead fires.
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct planning and coordination with battalion and supporting/adjacent
units.
2. Task organize the element.
3. Employ reconnaissance and surveillance elements to detect enemy forces,
positions, movement, and obstacles, and submit reports in a timely manner.
4. Issue order to all organic, attached, and supporting units.
5. Conduct rehearsals, subordinate unit back briefs, and inspections prior to
departure in order to confirm the following:
a. knowledge of mission critical information,
b. maintenance and functional checks of unit and personal equipment to
include: vehicles, crew-served weapons, night vision equipment,
communications equipment, and NBC equipment.
c. ensure vehicles are marked IAW mission requirements of SOP, combat
loaded, topped off, and PMCS is performed in accordance with the
standard operating procedures or warning order.
6. Plan for and emplace CREW within element in order to provide EMC coverage
in order to support the movement, halts, and immediate action drills to
include CASEVAC.
7. Follow the prescribed route, adhering to the briefed order of movement,
march interval, and rate of march.
8. Use prescribed catch-up speed to close with vehicles in front to
reestablish march interval.
9. Control movement with radio or visual signals.
10. Perform maintenance checks on vehicles during motorized execution IAW unit
SOP.
5-18
NAVMC 3500.44
16 Sep 08
11. Personnel in each vehicle maintain 360 degree observation around the
vehicle.
12. During halts, vehicles pull to the side of the road, maintaining the
prescribed interval, and establish local security.
13. Inform the motorized element commander of all breakdowns.
14. Move disabled vehicles off the route of march.
15. Personnel from disabled vehicle establish local security and provide
guide(s) to direct traffic until recovery element with security arrives.
16. Designated recovery element with security attempts to repair disabled
vehicles.
17. If the vehicle cannot be repaired attempt to recover with organic towing
or trailering capability. If the vehicle cannot be recovered by the
motorized element, all personnel, communications equipment, and
essential/sensitive cargo are transferred to another vehicle(s) in the
motorized element. Report location of abandoned vehicle for follow-on
recovery elements.
18. React to enemy contact in accordance with the SOPs briefed and rehearsed
prior to departure.
19. Upon completion of the motorized operation debrief unit actions and
reaction to enemy contact.
20. Report observations to higher and adjacent headquarters.
RELATED EVENTS:
INF-MAN-6111 INF-MAN-7111 INF-MAN-5111
REFERENCES:
1. FM 17-95 Cavalry
2. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17730 Fire And Movement Range
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17936 Close Air Support Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. In performing this event, unit will be evaluated on the event
components contained in INF-MAN-6111: Conduct an attack, in addition to the
components in this event.
2. Range must support all company weapons and attached weapons, to include
dud-producing ordnance and overhead fires.
3. Planning, preparations, and rehearsals must be conducted with full
representation from all participating units.
4. Motorized battle drills include, but are not limited to: vehicle
recovery, crossing danger areas, in-stride and deliberate breaching,
bypass, use of obscuration, etc.
5-19
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Coordinate with tank unit commander.
2. Conduct planning, inspections, rehearsals, and preparations.
3. Develop a scheme of maneuver that maximizes the mutually supporting
capabilities of tanks and infantry.
4. Develop means of communication between dismounted unit and tanks.
5. Employ infantry to support/protect tanks when required by situation and
terrain.
6. Employ tanks to maximize maneuverability, speed, momentum, firepower, and
shock effect.
7. Employ mechanized battle drills as required.
8. Ensure leaders at all levels exhibit a clear understanding of all
capabilities, safety considerations, and the associated effects/geometry
of fires/surface danger areas.
9. Employ tanks to limit vulnerability, and in accordance with their full
capabilities.
RELATED EVENTS:
INF-MAN-6111 INF-MAN-7111 INF-MAN-5111
REFERENCES:
1. FM 17-95 Cavalry
2. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17907 Tracked Vehicle Drivers Course
Facility Code 17936 Close Air Support Range
UNITS/PERSONNEL:
1. Tank unit
5-20
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. In performing this event, unit will be evaluated on the event
components contained in INF-MAN-6111: Conduct an attack, in addition to the
components in this event.
2. Range must support all company weapons and attached weapons, to include
dud-producing ordnance, 120mm main gun and overhead fires. Include
appropriate 120mm ammo.
3. Planning, preparations, and rehearsals must be conducted with full
representation from tanks, infantry, and other attached/supporting units.
4. Mechanized battle drills include, but are not limited to: vehicle
recovery, crossing danger areas, in-stride and deliberate breaching,
bypass, use of obscuration, SAGGER drills, etc.
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Coordinate with AAV unit leader.
2. Conduct planning, inspections, rehearsals, and preparations.
3. Disperse vehicles in covered and concealed positions prior to launching
the attack.
4. Determine load/bump plan.
5. Develop scheme of maneuver that maximizes the capability of mechanized
assets to deliver infantry to the pre-determined dismount points, and
support their assault by fires.
6. Conduct other dismount, link-up, and remount procedures as required.
7. Establish means of maintaining infantry unit leaders' situational
awareness while on vehicles.
8. Develop means of communication between dismounted unit and supporting
mechanized assets.
9. Dismount/employ infantry to support/protect vehicles when required by
situation and terrain.
10. Employ mechanized assets to maximize maneuverability, speed, momentum, and
shock effect.
11. Employ mechanized battle drills as required.
12. Ensure leaders at all levels exhibit a clear understanding of all
capabilities, safety considerations, and the associated effects/geometry
of fires/surface danger areas.
13. Employ mechanized assets to limit vulnerability, and in accordance with
their full capabilities, during consolidation.
5-21
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-MAN-6111 INF-MAN-7111 INF-MOBL-5150
INF-MAN-5111
REFERENCES:
1. FM 17-95 Cavalry
2. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17907 Tracked Vehicle Drivers Course
Facility Code 17936 Close Air Support Range
Facility Code 17410 Maneuver/Training Area, Light Forces
UNITS/PERSONNEL:
1. AAV unit
2. Tank unit
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. In performing this event, unit will be evaluated on the event
components contained in INF-MAN-6111: Conduct an attack, in addition to the
components in this event.
2. Range must support all company weapons and attached weapons, to include
dud-producing ordnance, 120mm main gun and overhead fires. Include
appropriate 120mm ammo.
3. Planning, preparations, and rehearsals must be conducted with full
representation from all units that comprise the mechanized attack force.
4. Mechanized battle drills include, but are not limited to: vehicle
recovery, crossing danger areas, in-stride and deliberate breaching,
bypass, use of obscuration, SAGGER drills, etc.
SUPPORTED MET(S): 1
5-22
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Conduct ground or aerial reconnaissance to gain information (routes of
ingress/egress, landing sites, obstacles, enemy positions, anti-aircraft
defense, etc.).
2. Conduct planning, inspections and preparation (must include
primary/alternate routes and landing zones (LZs), loading plan/pick-up LZ
plan, and landing plan/insert LZ plan).
3. Conduct fire support planning/deconfliction and combined arms rehearsal to
support aviation movement routes, preparatory fires (if applicable),
suppression of enemy air defense (SEAD), and insert.
4. Task Organize
5. Ensure assault force Marines, aircraft crew chiefs, and ground and
aviation leaders at all levels exhibit a clear understanding of
embarkation/debarkation of aircraft, actions in insert LZs/geometry of
fires, and emergency/safety procedures.
6. Develop an accurate system for manifesting all Marines to ensure
accountability throughout the operation.
7. Maintain security during loading.
8. Establish a means of maintaining ground unit leader's situational
awareness while on aircraft.
9. Establish a bump plan.
10. Establish Go/No Go criteria (if applicable).
11. Control and coordinate fires in support of movement, insert, and attack.
(Establish criteria for hand-off of control of fires from aviation
elements to the assault force element.)
12. Develop plan for airborne command and control (if applicable).
13. Develop link-up plan (if applicable).
14. Conduct terminal guidance (if applicable).
15. Upon landing, lead elements of the assault force quickly clear the
immediate vicinity of the zone, move to previously assigned areas, and
establish positions that provide protection for subsequent waves.
16. Quickly build up combat power in the zone.
17. Maintain security during landing and adjust unit and weapons positions as
required.
18. Reduce obstacles and mines in the vicinity of the LZ.
19. Task helicopter support teams (HSTs) and equip them to conduct external
loading and unloading and to relieve any ITG teams.
20. Send and receive required reports.
RELATED EVENTS:
INF-MAN-5111 INF-MAN-7111 INF-MAN-6111
INF-EXPO-5905
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-11.4 Helicopterborne Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
5-23
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Planning, preparations, and rehearsals must be conducted with full
representation from assault/escort and other supporting aviation, higher
headquarters, attachments, and fire support agencies.
2. Ground actions in insert LZ/on the objective must drive the aviation
plan (not vice versa).
SUPPORTED MET(S): 1, 2
CONDITION: Given a situation where the unit has reached an objective, arrived
at a new position, repelled an enemy attack, established defensive positions
following an attack, and the unit has been issued an order to consolidate and
reorganize.
EVENT COMPONENTS:
1. Establish initial security on most likely avenues of approach.
2. Establish priorities and commence work to improve positions and security.
3. Displace supporting arms/crew served weapons and reserves forward, to add
strength and ensure continuous fire support.
4. Adjust initial positions as a result of the ground reconnaissance and
changes in the enemy situation.
5. Process casualties.
6. Process detainees.
7. Redistribute personnel, supplies, and equipment to offset any
losses/shortages, and conduct resupply as required.
8. Integrate the use of natural obstacles, and prepare barriers and man-made
obstacles.
9. Position command and control to facilitate the conduct of future
operations.
10. Plan for the use of the reserve.
11. Send and receive reports as required.
12. Begin preparation for future missions.
13. Ensure coordination with adjacent and supported units.
5-24
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-MAN-5132 INF-MAN-5111 INF-MAN-7132
INF-MAN-6132 INF-MAN-7111 INF-MAN-6111
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct planning, inspections, and preparation.
2. Task organize.
3. Place the command group where it can best control the formation.
4. Conduct movement/formations that increase probability of enemy contact,
while providing security for the force, and facilitate rapid transition
into the attack.
5. Ensure timely and effective communications are maintained between
reconnaissance/lead elements, main body, fire support agencies, and
aviation.
6. Retain bulk of combat power in an uncommitted status during movement to
permit its rapid deployment on contact.
7. Reduce obstacles that cannot be bypassed.
8. Once contact is gained, rapidly develop and assess enemy situation.
9. Coordinate the delivery of fire support (direct and indirect), according
to plan and in a responsive manner.
10. Send and receive required reports.
RELATED EVENTS:
INF-MAN-5111 INF-MAN-6711 INF-MAN-7111
INF-MAN-6111
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
5-25
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Trafficable roads/trails
2. Appropriate to means of transportation, i.e. foot-mobile or
motorized/mechanized.
3. Range must support all company weapons and attached weapons, to include
dud-producing ordnance and overhead fires.
SUPPORTED MET(S): 2
EVENT COMPONENTS:
1. Conduct planning, inspections, and preparation.
2. Task organize.
3. Make reconnaissance and establish initial security.
4. Identify and mark primary, alternate, and supplementary positions.
5. Occupy the defense using marked occupation routes.
6. Initiate patrolling plan and improve security.
7. Identify, mark, and establish command posts.
8. Conduct work in accordance with priorities and timeline.
9. Establish and mark sectors of fire for subordinate, supporting, and
attached units.
10. Establish fields of fire.
11. Coordinate and supervise at all levels to ensure effective employment of
weapon systems, safety, and the geometry of fires.
12. Emplace obstacles.
13. Conduct the fire support/targeting process and ensure integration of
direct and indirect fires.
14. Register indirect fires.
15. Produce, receive, and forward fire plan sketches and range cards.
16. Refine positions.
17. Entrench and improve positions.
18. Establish communications and signals plan.
19. Establish and rehearse final protective fires, counterattack plan, and
defensive battle drills.
20. Establish alert postures.
21. Conduct continuing actions.
22. Send and receive required reports.
5-26
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-MAN-7132 INF-MAN-5132
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B643 Cartridge, 60mm High Explosive M888 15
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17560 Sniper Field-Fire Range
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17610 Grenade Launcher Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17830 Light Demolition Range
Facility Code 17905 Mine Warfare Area
Facility Code 17936 Close Air Support Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Live fire and maneuver range that supports organic weapons and non-
organic supporting arms.
2. Training area where digging is permitted.
3. This collective task can be executed from either a battle position or
an assigned sector.
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Conduct planning, inspections, and preparation.
2. Task organize.
3. Occupy delaying positions that afford good observation, fields of fire,
and integration of all direct and indirect fires.
4. Commence the withdrawal based on time, event, or signal.
5. Establish routes/sectors, timing, and tactical control measures that
ensure deconfliction and geometry of fires.
5-27
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-MAN-5133 INF-MAN-5132 INF-MAN-7133
INF-MAN-7132 INF-MAN-6132
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Live fire and maneuver range that supports organic weapons and non-
organic supporting arms.
2. Training area where digging is permitted.
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Initiate reconnaissance plan.
2. Conduct planning and coordination with higher, supporting, adjacent, and
attached units.
3. Task organize.
4. Establish cordon and search battle drills.
5. Issue the order.
6. Establish inner and outer cordon around the search area/location and
prevent movement into out of the area.
7. Maintain situational awareness of units and factors relative to the cordon
and search.
8. Search site for personnel, weapons, equipment, or other contraband.
9. Send and receive required reports.
10. Employ battle drills, as necessary.
11. Execute the mission.
5-28
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-MAN-5710 INF-PAT-6141
REFERENCES:
1. MCIP 3-33.01 Small Unit Leader's Guide to Counterinsurgency
2. MCRP 3-31.4B Mutli-service Tactics, Techniques, and Procedures for Cordon
and Search Operations
3. MCWP 3-33.5 Counterinsurgency Operations
4. BUST Handbook
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17962 MOUT Collective Training Facility (Small)
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1
CONDITION: Given a route with start point and release point, purpose, and
commander's intent.
EVENT COMPONENTS:
1. Specify the march route, order of march, formation, interval between
units, and the individual load.
2. Inspect personnel for the proper load, equipment, and readiness to move.
3. Step off at the designated time.
4. Individuals maintain their prescribed position and interval in the unit
formation, as specified in march order.
5. Follow prescribed route(s).
6. Maintain security that provides necessary indications and warning of enemy
presence and actions (observation posts, overwatch, and/or use of forward,
flank, and rear security with appropriate intervals).
7. Conduct halts in accordance with the unit SOP (as the tactical situation
permits) to rest troops, adjust and redistribute equipment, and perform
foot hygiene.
8. Leaders check the condition of all troops for foot marches.
9. Maintain local security during halts.
10. Use visual signals throughout the road march.
11. Send and receive required reports.
12. Arrive at the release point at the time specified.
RELATED EVENTS:
INF-MAN-6120
5-29
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1, 2
EVENT COMPONENTS:
1. Conduct planning and coordination between units and with higher
headquarters.
2. For moving unit: contact stationary unit leader/command post on
predesignated net and exchange critical information (linkup time, route of
movement, number of personnel in linkup elements, confirm challenge/
password, contingency plans, etc.).
3. For stationary unit: task an element to conduct the linkup, brief the
element on all key information, and the element occupies an over watch
position short of the linkup point before the designated linkup time.
4. For moving unit: halt a safe distance from the linkup point in a covered
and concealed position (rally point) and establish security.
5. For moving unit: establish communications with the stationary unit.
6. For moving unit: designate linkup element, issue contingency plans to the
main body, and move the element to the linkup point.
7. For moving unit: linkup element halts short of linkup point in a position
that overwatches the linkup point.
8. For moving unit: initiate far recognition signals.
9. For stationary unit: acknowledge far recognition signal.
10. For moving unit: move unit leader to linkup point while the rest of the
element maintains overwatch.
11. For moving unit: contact team conducts linkup with stationary unit, via
near recognition signal (challenge/password), and conduct final
coordination for movement of main body.
12. For moving unit: linkup element returns to main body and guides it to the
linkup point as directed by the stationary unit. Stationary unit guides
may be used.
13. For stationary unit: report linkup, and then guides the moving unit as
required to complete the linkup.
5-30
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-MAN-6132 INF-WPNS-5306 INF-MAN-5132
INF-MAN-7132
REFERENCES:
1. FM 17-95 Cavalry
2. FM 17-97 Regimental Armored Cavalry Troop
3. MCDP 1-3 Tactics
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Conduct planning, inspections, and preparation.
2. Task organize.
3. Conduct operations.
4. Prevent enemy ground forces from coming within direct fire range, or
influencing the protected route or area.
5. Emplace obstacles or mines in support of the scheme of maneuver.
6. Detect and defeat enemy observation/reconnaissance.
7. Maintain a quick reaction force/reserve to respond to situations and
contingencies.
8. Coordinate with local authorities, the civilian population, multi-national
forces, and other service components as required.
9. Send and receive required reports.
RELATED EVENTS:
INF-MAN-5710 INF-MAN-6710 INF-MOUT-5814
INF-MOUT-5803
REFERENCES:
1. FM 17-95 Cavalry
2. FM 17-97 Regimental Armored Cavalry Troop
3. MCDP 1-3 Tactics
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
5-31
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Conduct of security operations may include tactical operations such as:
patrols, vehicle checkpoints, cordon operations, etc. Combined operations
with host nation forces may be an integral aspect of this task depending on
METT-TSL.
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Conduct planning, coordination, and prepare for combat.
2. Conduct intelligence preparation.
3. Task organize.
4. Develop fire support plan.
5. Designate tactical control measures.
6. Develop the insert and extract plan, if applicable.
7. Develop emergency extraction plan.
8. Conduct movement/actions at specified times, along specified routes, or in
designated areas.
9. Collect and report required information.
10. Send and receive required reports.
11. Develop/refine information/situation as required.
12. For route reconnaissance: determine trafficability; locate all bridges;
locate fords or crossing sites near bridges; locate all underpasses,
tunnels, and culverts; identify restrictive curves and steep grades;
identify all other restrictive passages and obstacles; locate bypasses of
all restrictive passages; and reconnoiter all built up areas along the
route.
13. For zone reconnaissance: reconnoiter all terrain; inspect all bridges;
locate fords and crossing sites near bridges; inspect all overpasses,
underpasses, and culverts; identify/report all mines, IEDs, obstacles, and
barriers; locate bypasses around built up areas, obstacles, and
contaminated areas.
5-32
NAVMC 3500.44
16 Sep 08
14. For area reconnaissance use one of the following techniques: fan method,
converging-routes method, or successive-sectors method.
15. Conduct debrief.
RELATED EVENTS:
INF-PAT-7145
REFERENCES:
1. FM 17-95 Cavalry
2. FM 17-97 Regimental Armored Cavalry Troop
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Conduct planning and coordination.
2. Task organize.
3. Issue order to all organic, attached, and supporting units.
4. Occupy the assembly area.
5. Conduct planning, inspections, and rehearsals relative to critical convoy
factors.
6. Conduct movement at specified times and along specified routes, adhering
to the briefed order of movement, march interval, and rate of march.
7. Control movement with radio and visual signals.
8. Conduct battle drills to deal with any internal or external factors.
9. Send and receive required reports.
10. Conduct convoy debrief.
RELATED EVENTS:
INF-MOBL-5150
REFERENCES:
1. MCRP 4-11.3F Convoy Operations Handbook
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
5-33
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Convoy battle drills include but are not limited to: vehicle breakdown
and recovery, bump plan, enemy contact, counter-mobility, target precedence
and engagement criteria, counter/reaction to IED, casualty evacuation,
break in contact, vehicle catch-up, security halts, detainee handling, etc.
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Establish successive screen lines to occupy as enemy pressure increases.
2. Establish OPs for surveillance of the area beyond the screen line.
3. Conduct movement/maneuver to keep pace on the flanks/rear of a moving main
body, if applicable.
4. Conduct patrols (mounted and dismounted) between OPs and in areas that
cannot be observed, as the situation permits.
5. Detect and report all enemy forces in the unit sector before the enemy can
engage the main body with direct fire.
6. Plan and execute fire support plan to deceive enemy into deploying main
effort or to delay main body advance.
7. Avoid decisive engagement.
8. Maintain continuity of the screen and prevent the enemy reconnaissance
elements from observing, reporting on, or controlling fires on the main
body.
9. Attrite enemy reconnaissance elements.
10. Conduct movement from initial to subsequent screen lines.
11. Execute casualty collection.
12. Send and receive reports as required.
13. Provide early and accurate warning and reaction time and maneuver space to
the supported unit commander.
REFERENCES:
1. FM 17-97 Regimental Armored Cavalry Troop
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17410 Maneuver/Training Area, Light Forces
5-34
NAVMC 3500.44
16 Sep 08
UNITS/PERSONNEL:
1. Artillery unit Note: If conducted as a live-fire event.
2. Close Air Support (CAS) aircraft/Forward Air Controller (FAC)
SUPPORTED MET(S): 2, 3, 6
STANDARD: To prevent the enemy's access to the supported unit's main body.
EVENT COMPONENTS:
1. Move to the initial guard area using appropriate movement techniques.
2. Establish appropriate OPs for surveillance and local security.
3. Conduct patrols (mounted and dismounted) between OPs and in areas that
cannot be observed, as the situation permits.
4. LP/OPs detect and report all enemy forces in the unit sector before the
enemy can engage the main body with direct fire.
5. Plan and execute fire support plan to deceive enemy into deploying main
effort or to delay main body advance.
6. Destroy enemy reconnaissance elements before they can observe, report, and
control fires on the main body.
7. Prevent direct fires of the enemy from influencing the main body.
8. Gain and maintain contact with enemy as required.
9. Maintain communication with the protected force.
10. Reconnoiter the area between the protected force and the route of advance
as required.
11. Send and receive reports as required.
12. Reconnoiter the route of advance as required.
REFERENCES:
1. FM 17-97 Regimental Armored Cavalry Troop
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17410 Maneuver/Training Area, Light Forces
5-35
NAVMC 3500.44
16 Sep 08
UNITS/PERSONNEL:
1. Artillery unit
2. Close Air Support (CAS) aircraft/Forward Air Controller (FAC)
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Mission-type orders have been issued that allow units to perform the
mission despite the lack of radio communications.
2. Appropriate actions occur to restore radio communications.
3. Reliance on visual/audible signals, wire and messengers, per unit SOP, is
increased until nets are restored.
4. Continues to send and receive appropriate reports.
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-11.2 Marine Rifle Squad
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. After loss of communications, alternate frequencies may be used for
restoration purposes.
2. Events are planned, that would normally require the use of radio
communications, during the "reduced communications" time in order to
observe the unit's performance without radio nets.
5-36
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Conduct initial FS planning based on the commander's intent, the
guidance/fire support plan received from higher headquarters, rules of
engagement, and available intelligence and information on the enemy.
2. Identify FS assets allocated and available, begin initial coordination
with those agencies, and identify the limitations and capabilities of
those agencies.
3. Using higher headquarters Essential Fire Support Tasks (EFSTs) and
Commander's Guidance for Fire Support, develop EFSTs for the company that
include task (targeting objective), purpose (maneuver or operational
purpose), method (how the task will be achieved), and desired effects
(attempt to quantify successful accomplishment of the task).
4. Develop priorities of fires, allocation and positioning of supporting arms
assets, fire support coordination measures, triggers, weapons constraints
and guidance on the attack of specific targets.
5. Coordinates terminal control and target acquisition requirements/assets
with higher headquarters.
6. Ensure fire support planning is conducted concurrently with the
development of the scheme of maneuver, effectively integrating direct
fire, indirect fire and aviation support into the plan.
7. Consolidate and integrate platoon commander's requirements into the
company's plan.
8. Conduct a combined arms rehearsal.
9. Integrate supporting arms by coordinating a Close Air Support (CAS)
mission and Suppression of Enemy Air Defense (SEAD) fires, if required.
10. Assign priority of fire, set priority targets, and make plans to shift
priority targets as the operation progresses.
11. Consolidate overall fire support requirements, coordinate communication
requirements, identify any shortfalls in support, request additional fire
support and target acquisition assets, avoid duplication, and make
necessary adjustments to plans.
12. Submit draft FS plan to include EFSTs, List of Targets, Draft Schedules of
Fire, and recommended FSCMs to Higher Headquarters for approval and
integration.
13. Coordinate logistical needs of organic/attached fire support units.
14. Issue the company fire support plan to include: Concept of fires,
execution matrix, priorities of fires, asset availability, fire support
coordination measures, and target locations for all prearranged fires.
15. Conduct communication, fire support and maneuver rehearsals.
5-37
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-WPNS-5302 INF-FSPT-7302 INF-FSPT-7301
INF-FSPT-6302
REFERENCES:
1. FM 3-09.31 Tactics, Techniques, and Procedures for Fire Support for the
Combined Arms Commander
2. JP 3-09 Joint Tactics, Techniques, and Procedures for Close Air Support
3. MCRP 3-15.2A Mortars
4. MCRP 3-16.6A J-Fire, Multiservice Procedures for the Joint Application of
Fire Power
5. MCRP 3-16A Tactics, Techniques, and Procedures for the Targeting Process
6. MCRP 3-16C Tactics, Techniques, and Procedures for Fire Support for the
Combined Arms Commander
7. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
8. MCWP 3-16.6A Supporting Arms Observer, Spotter and Controller (FMFM 6-8)
9. MCWP 3-31.6 Supporting Arms Coordination in Amphibious Operations
SUPPORT REQUIREMENTS:
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. FiST tactically assumes position to best coordinate fires and maneuver.
2. FiST leader orients team to targets, briefs enemy situation.
3. FiST conducts battle drill per unit SOP: team determines target(s),
location(s), direction, distance, and elevation.
4. FiST confirms friendly position(s) and status of fire support agencies to
include priority targets and non-organic assets available.
5. Report lead trace/position of friendly units to supporting agencies/
higher headquarters and conduct initial coordination for fires.
6. FiST selects appropriate supporting agency (60s, 81s, Artillery, HSFS,
F/W, or R/W aviation) to prosecute target.
7. Integrate and de-conflict direct, indirect, and aviation delivered fires.
8. Begin the initial adjust fire process/requests for fires in support of
fire planning.
9. Develop plan for fires based on scheme of maneuver, EFSTs, assets
available, and commander's guidance.
5-38
NAVMC 3500.44
16 Sep 08
10. Coordinate and deconflict fire plan with higher, adjacent, and supporting
agencies.
11. FiST conducts rehearsal of fire support plan.
12. Execute fire support coordination.
13. Confirm fires are delivered in the required manner and are having the
appropriate effect. Adjustments are made as required.
14. Establish and maintain coordination with maneuver commanders and
supporting agencies to continue, shift, or cease fires as required.
15. Report effects of fires to company commander and pass effects of fires to
supporting agencies when the mission is completed. Record as required.
16. Send and receive reports as required and maintain situational awareness.
17. FiST prepares for follow-on missions/tasks.
RELATED EVENTS:
INF-WPNS-5302 INF-FSPT-7302 INF-FSPT-7301
INF-FSPT-6301
REFERENCES:
1. JP 3-09 Joint Tactics, Techniques, and Procedures for Close Air Support
2. MCRP 3-15.2A Mortars
3. MCRP 3-16.1A Tactics, Techniques and Procedures for Field Artillery Target
Acquisition
4. MCRP 3-16.2 Techniques and Procedures for Fire Support Coordination
5. MCRP 3-16C Tactics, Techniques, and Procedures for Fire Support for the
Combined Arms Commander
6. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
7. MCWP 3-16.6A Supporting Arms Observer, Spotter and Controller (FMFM 6-8)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17936 Close Air Support Range
ROOMS/BUILDINGS:
1. Combined Arms Staff Trainer (CAST)
UNITS/PERSONNEL:
1. Close Air Support (CAS) aircraft/Forward Air Controller (FAC)
2. Mortar/Artillery Unit
3. Naval Surface Fires Platform
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Live fire training area suitable for the coordinated employment of
mortars, artillery, CAS, and NSFS Note: Range must be capable of laser
targeting/acquisition device employment.
5-39
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Begin planning by conducting a mission analysis of higher headquarters'
order and the situation through METT-TSL.
2. Issue a warning order.
3. Coordinate attachments and detachments, to include briefing attachments on
applicable unit Standard Operating Procedures (SOPs).
4. Arrange for reconnaissance: use tentative scheme of maneuver and
information requirements to determine priorities for reconnaissance.
Determine method of reconnaissance (leader's recon, recon patrol, aerial
recon, etc.), personnel, gear and special instructions required to conduct
reconnaissance.
5. The unit (or designated portion) initiates movement.
6. Make reconnaissance: analyze information obtained, identify shortfalls,
and request additional assistance from higher headquarters.
7. Conduct coordination with higher, adjacent, and supporting units, at a
minimum including: Identify, request, obtain, and distribute CSS assets;
Submit and confirm fire support plans; Forward scheme of maneuver to all
applicable units; Update and disseminate intelligence; Identify control
measures; Confirm communications and signals; Follow time schedules; and
request and coordinate transportation assets.
8. Complete the plan, to include: Mission; Commander's intent; Concept of
operations; Scheme of maneuver that exploits enemy weaknesses and friendly
strengths; Organization of the unit (task organization), including all
attachments, detachments, and supporting elements; Main effort; Supporting
efforts; and reconnaissance and security; Specific tasks to all sub-
elements (Each task must have a purpose that relates the assigned
subordinate task to the overall task); Control measures and fratricide
reduction (ORM) steps; Fire support plan, targeting and priorities; and
combat load guidance.
9. Issue the order (SMEAC), providing ample subordinate planning and
preparation time by adhering as closely as possible to the 1/3 to 2/3
rule.
10. Supervise: Conduct final mission preparations. Leaders conduct brief
backs of their plan. Platoon commander's issue orders to platoons.
Rehearse key actions. All personal test-fire weapons, if the situation
permits. Distribute and spread load supplies.
11. Perform pre-combat inspections (PCIs) and pre-combat checks (PCCs) on
knowledge of mission critical information, maintenance and functional
checks of unit and personal equipment to include: vehicles, crew-served
5-40
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-1 Ground Combat Operations
3. MCWP 5-1 Marine Corps Planning Process
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1, 3, 6
EVENT COMPONENTS:
1. Locate command post (CP) to facilitate command and control, and to ensure
continuous communications with subordinate units as well as higher,
adjacent and supporting units.
2. Provide command and control of all subordinate units.
3. Maintain situational awareness.
4. Direct and coordinate current operations and initiate appropriate actions.
5. Organize to facilitate battle tracking and information flow.
6. Display information and ensure constant updating.
7. Track commander's critical information requirements (CCIRs).
8. Send and receive required reports.
9. Maintain a journal of all significant events.
10. Designate watches and establish turnover procedures that ensure readiness
and efficiency of incoming watch.
11. Organize personnel, equipment, and vehicles to operate 24 hours a day for
a sustained period.
12. Direct, conduct, and coordinate intelligence.
13. Direct, conduct, and coordinate logistics.
14. Direct, conduct, and coordinate fires.
15. Employ both active and passive security measures.
16. Identify alternate locations and prepare plans for the displacement in the
event the command post must be displaced rapidly.
5-41
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCDP 6 Command and Control
3. MCWP 3-40.3 Communications and Information Systems
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Task organize.
2. Attach forward observers, if applicable.
3. Determine method of employment, priority of fires/targets, primary
direction of fire, Fire Support Control Measures (FSCMs), and obtain a
list of supporting units from higher headquarters.
4. Provide a copy of operations order and fire support plan to mortar unit.
5. Position mortars to best support the scheme of maneuver.
6. Lay the gun line.
7. Process, deconflict, clear, deny, or modify calls for fire per battalion
SOP.
8. Determine and coordinate communications and signal plan.
9. Integrate employment plan with external fire support assets/agencies.
10. Determine displacement criteria and factors, and move to alternate firing
positions as required.
11. Identify final protective fire location.
12. Register priority targets, FPF, and additional planned targets.
13. Determine logistical requirements and conduct resupply.
14. Ensure coordination is conducted, particularly with regard to gun-target
line, avoidance of overhead fires, and security.
RELATED EVENTS:
INF-0341-5101 INF-0341-5100 INF-0341-5102
INF-0341-5103 INF-0341-5104 INF-FSPT-7302
INF-WPNS-5306 INF-FSPT-6301 INF-FSPT-6302
INF-FSPT-7301 INF-WPNS-5303
5-42
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCRP 3-15.2A Mortars
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Range factors, FSCMs, Battle Space Geometry, and timing within the
scheme of maneuver, must be taken into account when conducting
displacement.
SUPPORTED MET(S): 1, 2, 3, 4, 6
DESCRIPTION: The company commander will incorporate the use of scout snipers
to support his scheme of maneuver and intent. The company commander will
provide a priority target list, engagement criteria, and destruction criteria
for the snipers' use. The commander will receive and develop information on
the enemy dispositions and transmit to higher/adjacent headquarters. The
commander will support the forward placed teams with appropriate supporting
arms and quick reaction force. Commander incorporates the team(s) into his
intelligence gathering effort.
EVENT COMPONENTS:
1. Conduct planning, coordination, and prepare for combat.
2. Conduct intelligence preparation.
3. Task organize.
4. Develop the fire support plan.
5. Designate tactical control measures.
6. Develop insert and extract plan, if applicable.
7. Develop emergency extraction plan.
8. Conduct movement/actions at specified times, along specified routes, or in
designated areas.
9. Provide priority target list, engagement criteria, and destruction
criteria for the snipers' use.
10. Send and receive required reports.
11. Ensure readiness to support inserted teams with supporting arms and quick
reaction force.
5-43
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Factors to be considered during planning must include, but is not
limited to: insertion methods, extraction methods, emergency extraction
methods and criteria, and quick reaction force support of the sniper
team(s).
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. The unit determines the logistical requirements based on higher
headquarters' requirements and in accordance with the mission.
2. Develops a logistics plan to include: establishing deliver times or supply
points based on technique of distribution, identifying combat load and
operational equipment requirements for the unit, procedures for
maintenance and medical services, a timeline for execution, priority of
support, and inspection criteria and location.
3. The unit coordinates logistical support in a timely manner to include:
required classes of supply, method and location of distribution, motor
transportation requirements, medical service support, and maintenance
needs.
5-44
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-CSS-7403
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCDP 4 Logistics
3. MCO 3120.8A Organization of FMF for Combat
4. MCRP 3-11.2A Marine Troop Leader's Guide
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Injured Marine applies self-aid.
2. Marines apply buddy aid to the injured.
3. Evacuate friendly and enemy WIA and KIA to Casualty Collection Point
(CCP), while taking reasonable measures to safeguard casualties.
4. Weapons, serialized gear, and PPE are handled and accounted for in
accordance with unit SOP.
5. Wounded enemy combatants are safeguarded/escorted as required.
6. Unit corpsmen conduct triage at CCP, and advise company leadership on
evacuation priorities and numbers.
7. Conduct coordination with higher headquarters for evacuation.
8. Begin casualty reporting and tracking immediately after an individual is
wounded, starting at the lowest level and terminating at higher
headquarters.
9. In accordance with SOPs, civilian casualties are either evacuated through
military system, or coordination is conducted for treatment by civilian
medical personnel/facilities.
RELATED EVENTS:
INF-MED-7430
5-45
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCRP 3-02G First Aid (Dec 02)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Evaluator will tag casualties. Marines who are tagged with
incapacitating wounds drop where "hit." Marines tagged as incapacitated,
do not move under their own power, but rely on others to carry them.
2. This task may be trained to standard in garrison.
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Individuals conduct personal hygiene.
2. Leaders at every level understand the importance of field sanitation, and
act aggressively to educate, enforce, and inspect standards.
3. Ensure Marines are educated that minor injuries/wounds can worsen if not
identified and properly treated.
4. If continuously wearing chemical protective over garments, individuals try
to bathe and change undergarments every 48 hours to avoid rashes.
5. Individuals drink only potable water as identified by the unit corpsman.
6. The unit maintains the prescribed load of water purification materials.
7. All individuals use only urinals and latrines as designated by unit
corpsmen.
8. All food is protected from extreme temperatures, moisture, and pests.
9. Unit leaders are assigned to supervise and inspect food and water
acquisition, preparation, and consumption.
10. Unit locations are selected to avoid pests if possible.
11. Trash and other wastes are handled in a manner that does not adversely
affect health and hygiene.
12. Individuals use protective measures against pests, to include wearing
netting, using repellent, spraying, dusting, poisoning, and trapping.
13. Individuals wash hands before eating or preparing food.
5-46
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCRP 4-11.1D Field Hygiene and Sanitation
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Conduct tactical operations to support the collection effort.
2. Stand up the Company Level Intelligence Cell (CLIC).
3. Conduct Intelligence Preparation of the Battlespace (IPB).
4. Produce and disseminate intelligence reports.
5. Produce and deliver briefs and other intelligence products.
6. Rapidly process, disseminate, and exploit information gained through
Tactical Site Exploitation (TSE), tactical questioning (TQ), document
exploitation (DOCEX), and other means.
7. Develop procedures to ensure rapid dissemination of
information/intelligence to higher, adjacent, and subordinate units.
8. Develop, coordinate, and manage the collection plan based on PIRs and
Specific Information Requirements (SIRs) for organic/direct support units.
9. Request and integrate non-organic support into the collection effort.
10. Ensure all subordinate leaders are aware of the capabilities and
limitations of collection assets, to include non-organic supporting
resources.
11. Employ the Intelligence Operations Workstation (IOW) to support
operations.
12. Produce local area maps, imagery, and products within capability.
13. Track and update information on emerging enemy techniques, tactics, and
procedures (TTPs).
14. Produce target packages.
15. Enforce active and passive counterintelligence measures.
16. Publish daily changing of primary and alternate challenge and
passwords/signs and countersigns; take appropriate action if they are
compromised.
17. Conduct intelligence briefs to support operations.
18. Conduct debriefs to support the collection effort.
19. Track detainees for further exploitation.
20. Train all Marines to collect and report information to support the
collection effort.
5-47
NAVMC 3500.44
16 Sep 08
CHAINED EVENTS:
0311-INT-2002 0311-INT-2004 0311-INT-2003
0311-INT-2001
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. MCDP 2 Intelligence
3. MCWP 2-1 Intelligence Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. A company level intelligence cell is a task-organized team consisting
of all personnel who have been trained and are involved in the conduct of
intelligence operations. Depending on the situation, it may consist of
only organic personnel from the company, but ideally it will be augmented
by other Marines performing various intelligence-related tasks. Personnel
support from higher and supporting units, (i.e. order of battle analysts,
HUMINT analysts, interpreters, etc.) may be requested.
SUPPORTED MET(S): 1, 2, 6
EVENT COMPONENTS:
1. Trained monitor/survey teams monitor the environment with a chemical agent
detection equipment (chemical agent monitor/chemical agent detector kit),
radiological detection equipment and visual observation.
2. Sound the alarm if chemical agent or radiological contamination is
detected, or biological agent is detected, or suspected.
3. Report the results of the monitor/survey operations.
4. Mark contaminated area.
RELATED EVENTS:
INF-CBRN-7501 INF-CBRN-6504 INF-CBRN-6503
INF-CBRN-6502
5-48
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCRP 3-37.2A MTTP for Chemical, Biological, Radiological and Nuclear
Contamination Avoidance
2. MCRP 3-37.2B Nuclear Contamination Avoidance
3. MCWP 3-37.1 MTTP for CBRN Defense Operations
4. MCWP 3-37.4 NBC Reconnaissance
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17230 Gas Chamber
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1, 2, 6
STANDARD: To don MOPP-4 in required time limit (chemical and biological only)
and take appropriate protective measures.
EVENT COMPONENTS:
1. Company receives order to don MOPP 4 or hears CBRN alarm.
2. Marines don MOPP 4 and leaders inspect.
3. Monitor/Survey teams inspect area for signs of contamination.
4. Company reports status when at MOPP 4 and results of monitor survey
operations.
RELATED EVENTS:
INF-CBRN-7501
REFERENCES:
1. MCRP 3-37.2C Multi-service TTP for NBC Aspects of Consequence Management
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
G963 Grenade, Hand Riot CS M7A3 3
5-49
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17230 Gas Chamber
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This drill can be initiated by the evaluator giving the alert "Gas,"
"Spray," "Fallout," or by throwing a tactical CS, riot control, or white
smoke (HC) grenade.
SUPPORTED MET(S): 1, 2
EVENT COMPONENTS:
1. Movement of unit into area is reported to battalion headquarters.
2. Monitor/Survey teams conduct CBRN surveys.
3. When the contaminated area is detected, submit an NBC 4 report to higher
headquarters and increase to MOPP-4 for chemical and biological
contamination.
4. Adjust formations to increase intervals between individuals and units as
the tactical situation permits.
5. Avoid puddles, overhanging branches, and bushes as much as possible.
6. Maintain security while moving through the contaminated area.
7. Move through contaminated area as rapidly as the tactical situation
permits.
8. Send and receive required reports.
9. Drop expendable covering at the edge of the contaminated area.
10. Conduct a security halt 500 meters past the far side of the contaminated
area.
11. Conduct immediate decon on any contaminated areas. Treat and evacuate any
casualties.
5-50
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-CBRN-6501 INF-CBRN-7501 INF-CBRN-6502
REFERENCES:
1. MCWP 3-37.1 MTTP for CBRN Defense Operations
SUPPORT REQUIREMENTS:
SUPPORTED MET(S): 1, 2, 6
CONDITION: The unit is in MOPP-4 and the gear has been contaminated.
EVENT COMPONENTS:
1. Contaminated protective clothing is removed without transfer of
contamination.
2. Individuals put on new protective clothing using the "Buddy System."
3. Conduct local/spot decontamination, during the exchange, anytime
contamination is expected.
4. Maintain seal on field protective mask.
RELATED EVENTS:
INF-CBRN-6501 INF-CBRN-7501
REFERENCES:
1. MCWP 3-37.3 NBC Decontamination (FM 3-5)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
5-51
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 3
EVENT COMPONENTS:
1. Conduct appropriate pre-combat preparations, rehearsals, checks, and
inspections.
2. Task organize.
3. Conduct reconnaissance and intelligence preparation of the battlespace
(IPB), if applicable.
4. Request and distribute specialized equipment and PPE.
5. Identify restraints/constraints with regard to detainee handling and other
mission-particular factors.
6. Identify and prioritize key facilities/area to be protected.
7. Incorporate local and civil authorities into planning, preparation, and
execution, if applicable.
8. Minimize collateral damage.
9. Establish a media/public affairs plan.
10. Conduct public order operations, to include, but not limited to:
augmenting civil authority security forces, protecting key installations,
riot control, removing unlawful obstructions, or dispersing an unlawful
assembly.
11. Establish teams in overwatch.
12. When operating in support of local security forces/police, exchange
liaison personnel and co-locate command posts.
13. Identify and position a quick reaction force to reinforce/support as
required.
14. Escalate force as necessary to achieve control.
15. Employ non-lethal weapons (when available) to reduce collateral damage and
injury to civilians, while simultaneously ensuring readiness to apply
lethal force if required.
16. Send and receive required reports.
REFERENCES:
1. FM 3-07 Stability Operations and Support Operations
2. MCIP 3-33.01 Small Unit Leader's Guide to Counterinsurgency
3. MCWP 3-33.5 Counterinsurgency Operations
SUPPORT REQUIREMENTS:
5-52
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 3
DESCRIPTION: This task supersedes the task "Conduct foreign internal defense
(FID)" contained in the previous edition of the T&R.
EVENT COMPONENTS:
1. Conduct appropriate pre-combat preparations, rehearsals, checks, and
inspections.
2. Task organize.
3. Conduct cultural training and basic language skills training of designated
personnel.
4. Train/remediate/certify designated personnel as required to prepare them
for the mission.
5. Conduct training with the same or similar weapons and equipment as that
used by foreign unit to be trained, if applicable.
6. Train local security forces or police in required skill sets through
demonstration and live fire.
7. Use translators/interpreters as required.
8. Conduct combined missions to teach by example and build confidence and
proficiency.
9. Provide/coordinate a reaction force capable of supporting combined
missions or local security force/police missions.
10. Continuously debrief, revise training, and report progress to higher
headquarters.
RELATED EVENTS:
INF-FID-7802
REFERENCES:
1. FM 3-07 Stability Operations and Support Operations
2. MCIP 3-33.01 Small Unit Leader's Guide to Counterinsurgency
3. MCWP 3-33.5 Counterinsurgency Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17502 Non-Standard Small Arms Range
Facility Code 17410 Maneuver/Training Area, Light Forces
EQUIPMENT:
1. Foreign Weapons
5-53
NAVMC 3500.44
16 Sep 08
MATERIAL:
1. Host Nation Cultural Information Package
2. Briefs from Host Nation Liaison Officer, or United States Foreign Area
Officer
UNITS/PERSONNEL:
1. Translator/Interpreter
SUPPORTED MET(S): 6
EVENT COMPONENTS:
1. Begin planning.
2. Conduct appropriate pre-combat preparations, rehearsals, checks, and
inspections.
3. Task organize for urban operations.
4. Coordinate with adjacent, supporting, and attached units.
5. Conduct reconnaissance.
6. Assess demographics/population factors.
7. Incorporate rules of engagement (ROE).
8. Develop fire support plan, tactical control measures, routes, and urban
specific factors and restrictions.
9. Determine/coordinate key terrain labeling.
10. Conduct, coordinate, and complete the fire support/targeting process.
11. Conduct movement and tactics in the four levels of urban terrain
(building, street, subterranean, and air).
12. Establish target precedence, consider effects for all weapon systems, and
assess collateral damage.
13. Establish the signal/marking plan.
14. Isolate the objective.
15. Control and direct organic and supporting arms.
16. Breach urban obstacles.
17. Gain a foothold in limited objectives.
18. Ensure weapons inside buildings have adequate space and ventilation for
backblast (on upper floors, if possible, for long-range top shots).
19. Maintain situational awareness of units and factors relative to urban
operations.
20. Conduct clearing and marking.
21. Complete actions on the objective.
22. Send and receive required reports.
23. Evacuate casualties, process detainees, and conduct logistic operations.
24. Issue fragmentary orders to units in preparation for follow-on missions.
25. Conduct continuous engagement/interaction with locals to support
operations and gain actionable intelligence.
5-54
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-MOUT-5801 INF-MOUT-7801 INF-MOUT-5814
INF-MOUT-5803
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-11.2 Marine Rifle Squad
3. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
4. X-Files 3-35.31 Urban Attack
5. X-Files 3-35.32 Urban Defense
6. X-Files 4-11.71 Urban Sustainment
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17962 MOUT Collective Training Facility (Small)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task replaced "Conduct an urban attack" in the previous edition of
the T&R. Additionally, urban defense, patrolling, movement to contact, and
fire support tasks were deleted and incorporated into this task.
SUPPORTED MET(S): 4
EVENT COMPONENTS:
1. In concert with USN and other designated personnel, the unit conducts all
planning necessary for embarkation, movement, debarkation, and re-
embarkation from assault shipping.
2. Conduct technique-specific rehearsals focused on all aspects of embarked
movement and ship-to-shore movement.
3. Develop the embarkation/load plan, to include bump plan.
4. Compile manifests for movement, and submit/forward as necessary.
RELATED EVENTS:
INF-OPS-6401 INF-EXPO-7901
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. FMFM 6-4 Marine Rifle Company/Platoon
3. MCWP 3-31.5 Ship-to-Shore Movement
4. MCWP 3-31.6 Supporting Arms Coordination in Amphibious Operations
5-55
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. In performing this task, the company will be evaluated on the event
components contained in INF-OPS-6401: Prepare for Combat, as well as the
components listed herein.
2. Ensure participation/coordination of required personnel during the
development of the scheme of maneuver, fire support plan, and landing plan.
SUPPORTED MET(S): 4
EVENT COMPONENTS:
1. Conduct planning, coordination, and prepare for combat.
2. Conduct intelligence preparation.
3. Task organize.
4. Embark and conduct ship-to-shore movement.
5. Coordinate the use of direct and indirect fire weapons to facilitate
movement to shore by engaging enemy positions.
6. Establish criteria for passage of control of fires ashore.
7. Position fire support ashore to maintain momentum of the assault.
8. Conduct actions on the objective.
9. Send and receive required reports.
10. Conduct link-up or relief-in-place with follow-on units.
RELATED EVENTS:
INF-EXPO-7903 INF-MAN-6117 INF-EXPO-7904
INF-EXPO-6901 INF-OPS-6401
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. FMFM 6-4 Marine Rifle Company/Platoon
3. MCWP 3-31.5 Ship-to-Shore Movement
4. MCWP 3-31.6 Supporting Arms Coordination in Amphibious Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17909 Ship Loading And Unloading Mockup
Facility Code 17908 Amphibious Vehicle Training Area
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
UNITS/PERSONNEL:
1. Landing craft Note: AAVs, Small Craft, or other landing craft.
MISCELLANEOUS:
5-56
NAVMC 3500.44
16 Sep 08
ADMINISTRATIVE INSTRUCTIONS:
1. Refer to INF-MAN-6117: Conduct Heliborne Assault, as required.
SUPPORTED MET(S): 4
STANDARD: The unit conducts an amphibious raid. The unit makes necessary
adjustments to the plan as the situation develops, achieves the commander's
intent and completes a planned withdrawal.
EVENT COMPONENTS:
1. Task organize for the raid.
2. Conduct ship to shore movement.
3. Ensure security elements occupy designated positions to the flanks and
rear of the unit and along avenues of approach to the objective.
4. Move support element to a covered and concealed position from which well-
aimed fire can be placed on the objective.
5. Move assault element to the designated assault position.
6. Ensure support element is capable of providing fires in support of the
assault element.
7. Plan indirect, suppressive, or obscuration fires on known and suspected
enemy positions.
8. Ensure security element prevents enemy entry into or escape from the
objective area.
9. Ensure assault element executes actions on the objective, consolidates,
and reorganizes.
10. On order, the unit withdraws from the objective.
11. Conduct shore to ship movement as per the planned withdrawal.
12. Ensure personnel accountability prior to withdrawal.
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. FMFM 6-4 Marine Rifle Company/Platoon
3. MCWP 3-31.5 Ship-to-Shore Movement
4. MCWP 3-31.6 Supporting Arms Coordination in Amphibious Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17908 Amphibious Vehicle Training Area
Facility Code 17909 Ship Loading And Unloading Mockup
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
5-57
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 3
EVENT COMPONENTS:
1. Conduct planning, coordination, and prepare for combat.
2. Conduct intelligence preparation.
3. Task organize.
4. Draw and issue specialized equipment/prepare ECC suite.
5. Conduct movement to the objective/evacuation site.
6. Conduct security and/or ECC operations.
7. Conduct liaison/coordination with Marine Security Guard, local security,
and/or State Department personnel, as required.
8. React to public order disturbance, enemy action, or reports of evacuees at
other locations.
9. Conduct retrograde.
10. Send and receive required reports.
11. Conduct debrief.
RELATED EVENTS:
INF-EXPO-5904 INF-EXPO-8904
REFERENCES:
1. MCDP 1-0 Marine Corps Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17760 MOUT Assault Course (MAC)
Facility Code 17962 MOUT Collective Training Facility (Small)
UNITS/PERSONNEL:
1. MOUT facility/MOUT Training area
2. Role players (Evacuees)
3. Opposing Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This may include public order operations such as augmenting local
5-58
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 3
EVENT COMPONENTS:
1. Conduct appropriate pre-combat preparations, rehearsals, checks, and
inspections.
2. Task organize.
3. Coordinate with likely supporting units in advance for participation in
recovery operations (Engineers, Tanks, LAR, AAVs, CSSE, MWSS, etc.).
4. Identify the need for and issue any special equipment.
5. Establish command relationships with aviation units and supporting
personnel, if applicable.
6. Identify alert levels and required steps/posture to ensure readiness to
meet response time.
7. Coordinate means to link-up with, communicate with, and validate identity
and status of friendly personnel.
8. Ensure readiness to handle remains.
9. Recover sensitive equipment/items as directed and conduct
demolitions/control supporting arms to destroy anything not removed.
10. Conduct all required coordination with higher, adjacent, and supporting
units.
11. Conduct coordination to collect common communication channels such as the
guard frequency, and ensure communication equipment compatibility with
aviation units with the AO (UHF/VHF/SATCOM).
12. Develop/coordinate plan for reinforcement/additional support.
13. Conduct movement to the objective area.
14. Conduct security, search, and recovery operations.
15. After meeting established tasks, withdraw to friendly lines or other safe
haven.
16. Send and receive required reports.
17. Conduct debrief.
RELATED EVENTS:
INF-MAN-6117 INF-EXPO-5905
REFERENCES:
1. JP 1-02 DOD Dictionary of Military and Associated Terms
2. MCRP 5-12C Marine Corps Supplement to the Department of Defense Dictionary
of Military and Associated Terms
3. MCWP 3-24 Assault Support
5-59
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
UNITS/PERSONNEL:
1. Maneuver/Training area
2. Role Players (downed aircrew)
3. Opposing Forces
5-60
NAVMC 3500.44
19 Sep 08
CHAPTER 6
PARAGRAPH PAGE
6-1
NAVMC 3500.44
19 Sep 08
CHAPTER 6
6001. ADMINISTRATIVE NOTES. T&R events are coded for ease of reference.
Each event has a 4-4-4 digit identifier. The first four digits represent the
occupational field, "INF". The second four digits represent the functional
or duty area (e.g. Fire Support Planning (FSPT), Communications (COMM),
etc.). The last four digits represent the level, and identifier number of
the event. The last four digits represent the level, and identifier number
of the event. The platoon/section collective events are only in the 5000
level. Every event has a unique identifier number from 001 to 999.
6-2
NAVMC 3500.44
19 Sep 08
6-3
NAVMC 3500.44
19 Sep 08
6-4
NAVMC 3500.44
19 Sep 08
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Conduct leader's reconnaissance.
2. Implement security plan.
3. Coordinate with adjacent and supported units.
4. Ensure mutual support of all squads.
5. Develop and turn in section fire plan sketch.
6. Conduct continuing actions.
CHAINED EVENTS:
INF-0331-3100 INF-0331-4100
RELATED EVENTS:
INF-0331-4102 INF-0331-4103 INF-0331-4104
INF-0331-5105 INF-0331-5102 INF-0331-5103
INF-0331-5104 INF-0331-4105
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17582 Automated Multipurpose Machine Gun Range (MPMG)
SUPPORTED MET(S): 1, 2, 3, 6
6-5
NAVMC 3500.44
19 Sep 08
EVENT COMPONENTS:
1. Conduct leader's reconnaissance.
2. Implement security plan.
3. Coordinate with adjacent and supported units.
4. Ensure mutual support of all squads.
5. Develop and turn in section fire plan sketch.
6. Conduct continuing actions.
CHAINED EVENTS:
INF-0331-4101
RELATED EVENTS:
INF-0331-4106 INF-0331-4107 INF-0331-5108
INF-0331-5106 INF-0331-5107 INF-0331-4108
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17582 Automated Multipurpose Machine Gun Range (MPMG)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Entrenching will encompass the actual gun position and the ammo-man
position.
2. The supporting range needs to be developed to support range card
development with TRPs, FPLs, primary and alternate positions, etc.
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct mission analysis.
2. Assist in the development of the scheme of maneuver.
3. Task organize.
4. Direct the emplacement of the section/platoon.
5. Coordinate with adjacent, supporting and supported units.
6. Engage targets according to the scheme of maneuver.
6-6
NAVMC 3500.44
19 Sep 08
7. Control fires.
8. Displace according to the scheme of maneuver.
9. Prepare for follow on missions.
CHAINED EVENTS:
INF-0331-4102
RELATED EVENTS:
INF-0331-5102
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 2
EVENT COMPONENTS:
1. Conduct mission analysis.
2. Assist in the development of the scheme of maneuver.
3. Task organize.
4. Direct the emplacement of the section/platoon.
5. Coordinate with adjacent, supporting and supported units.
6. Engage targets according to the scheme of maneuver.
7. Control fires.
8. Displace to alternate or supplementary positions according to the scheme
of maneuver.
9. Prepare for follow on missions.
6-7
NAVMC 3500.44
19 Sep 08
CHAINED EVENTS:
INF-0331-4103
RELATED EVENTS:
INF-0331-4100 INF-0331-5100
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 6
EVENT COMPONENTS:
1. Conduct mission analysis.
2. Assist in the development of the scheme of maneuver.
3. Task organize.
4. Direct the emplacement of the section/platoon.
5. Coordinate with adjacent, supporting and supported units.
6. Engage targets according to the scheme of maneuver.
7. Control fires.
8. Displace to alternate or supplementary positions according to the scheme
of maneuver.
9. Prepare for follow on missions.
RELATED EVENTS:
INF-0331-5100 INF-0331-4100
6-8
NAVMC 3500.44
19 Sep 08
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 3
EVENT COMPONENTS:
1. Conduct mission analysis.
2. Assist in the development of the scheme of maneuver.
3. Task organize.
4. Direct the emplacement of the section/platoon.
5. Coordinate with adjacent, supporting and supported units.
6. Engage targets according to the scheme of maneuver.
7. Control fires.
8. Displace to alternate or supplementary positions according to the scheme
of maneuver.
9. Prepare for follow on missions.
RELATED EVENTS:
INF-0331-5100 INF-0331-4100
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
6-9
NAVMC 3500.44
19 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct mission analysis.
2. Task organize.
3. Emplace machinegun squad.
4. Engage targets according to the scheme of maneuver.
5. Control fires as directed.
6. Displace according to the scheme of maneuver.
7. Prepare for follow on missions.
RELATED EVENTS:
INF-0331-4106 INF-0331-4101 INF-0331-5101
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
6-10
NAVMC 3500.44
19 Sep 08
SUPPORTED MET(S): 2
EVENT COMPONENTS:
1. Conduct mission analysis.
2. Task organize.
3. Emplace machinegun squad.
4. Engage targets according to the scheme of maneuver.
5. Control fires as directed.
6. Displace to alternate or supplementary positions according to the scheme
of maneuver.
7. Prepare for follow on missions.
RELATED EVENTS:
INF-0331-4101 INF-0331-5101 INF-0331-4107
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 6
6-11
NAVMC 3500.44
19 Sep 08
EVENT COMPONENTS:
1. Conduct mission analysis.
2. Assist in the development of the scheme of maneuver.
3. Task organize.
4. Direct the emplacement of the squad.
5. Coordinate with adjacent and supported units.
6. Engage targets according to the scheme of maneuver.
7. Displace to alternate or supplementary positions according to the scheme
of maneuver.
8. Prepare for follow on missions.
RELATED EVENTS:
INF-0331-4108 INF-0331-5101 INF-0331-4101
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Reconnaissance, selection, and occupation of mortar position (RSOP).
2. Develop security plan.
3. Lay the gun line.
6-12
NAVMC 3500.44
19 Sep 08
CHAINED EVENTS:
INF-0341-4100
RELATED EVENTS:
INF-0341-4101 INF-0341-5102 INF-0341-5101
INF-0341-4102
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. MCRP 3-15.2A Mortars
3. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17670 Mortar Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Mortar team members will conduct the performance steps, working
interchangeably.
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Move in accordance with the scheme of maneuver.
2. Emplace mortar section.
3. Coordinate with adjacent and supporting units.
4. Engage targets according to the fire support plan.
5. Control fires as directed.
6. Displace according to the scheme of maneuver.
7. Prepare for follow on missions.
CHAINED EVENTS:
INF-0341-4101
RELATED EVENTS:
INF-0341-5104 INF-0341-5103
6-13
NAVMC 3500.44
19 Sep 08
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. MCRP 3-15.2A Mortars
3. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17670 Mortar Range
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Analyze mission.
2. Task organizes.
3. Emplace mortar section.
4. Prepare fire and control equipment.
5. Engage targets according to the fire support plan.
6. Coordinate with the battalion fire support coordination center.
7. Control fires as directed.
8. Displace according to the scheme of maneuver.
9. Prepare for follow on missions.
CHAINED EVENTS:
INF-0341-4102
RELATED EVENTS:
INF-0341-5100 INF-FSPT-6302 INF-FSPT-6301
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. MCRP 3-15.2A Mortars
3. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17670 Mortar Range
6-14
NAVMC 3500.44
19 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Task organization includes whether the platoon will be employed as a
platoon or as a split section.
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Engage a point target.
2. Engage a linear target.
3. Fire illumination.
4. Fire coordinated illumination.
RELATED EVENTS:
INF-0341-4100 INF-0341-5104 INF-0341-5100
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. MCRP 3-15.2A Mortars
3. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B643 Cartridge, 60mm High Explosive M888 33
C871 Cartridge, 81mm Illuminating M853A1 12
C869 Cartridge, 81mm HE M889/M889A1 with 41
B647 Cartridge, 60mm Illuminating M721 12
RANGE/TRAINING AREA:
Facility Code 17670 Mortar Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Engage a point target - 7 rounds Section/11 rounds Platoon.
2. Engage a linear target - 20 rounds for a standard 400m target length.
3. Fire illumination - 4 rounds.
6-15
NAVMC 3500.44
19 Sep 08
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Fire quick smoke.
2. Fire immediate suppression/smoke.
3. Fire registration.
4. Fire FPF.
5. Adjust standard sheaf.
6. Fire suppression of enemy air defense (SEAD).
RELATED EVENTS:
INF-0341-4100 INF-0341-5103 INF-0341-5100
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. MCRP 3-15.2A Mortars
3. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
C870 Cartridge, 81mm Smoke Red Phosphorus 98
C256 Cartridge, 81mm High Explosive with 51
RANGE/TRAINING AREA:
Facility Code 17670 Mortar Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Fire quick smoke - 90 rounds RP/3 HE.
2. Immediate smoke - 4 rounds Section/ 8 rounds Platoon (HE).
3. Immediate suppression - 4 rounds Section/ 8 rounds Platoon (HE).
4. FPF - 20 rounds Section/ 40 rounds Platoon.
SUPPORTED MET(S): 1, 2, 3, 6
6-16
NAVMC 3500.44
19 Sep 08
EVENT COMPONENTS:
1. Conduct leader's reconnaissance.
2. Implement security plan.
3. Coordinate with adjacent and supported units.
4. Ensure mutual support of all squads.
5. Develop and turn in section fire plan sketch.
6. Conduct continuing actions.
CHAINED EVENTS:
INF-0352-3100 INF-0352-4100
RELATED EVENTS:
INF-0352-3101 INF-0352-7101 INF-0352-4101
REFERENCES:
1. FM 3-22.34 TOW Weapon System
2. FM 3-22.37 Javelin Medium Anti-armor Weapon System
3. TM 09397B-12/1 Operator and Organizational Maintenance Manual for Javelin
4. TM 9-1425-450-12 TOW Weapon System Guided Missile System
5. TM 9-1425-923-12 Saber System (Improved Target Acquisition System) M41A
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
EQUIPMENT:
1. M220E4 TOW weapon system.
2. M41A Saber system.
3. M98A1 Javelin medium anti-armor weapon.
SUPPORTED MET(S): 3
EVENT COMPONENTS:
1. Conduct BAMCIS.
2. Conduct movement to the objective/evacuation site.
3. Conduct security operations.
6-17
NAVMC 3500.44
19 Sep 08
4. React to contact.
5. Conduct retrograde via ground or air.
6. Submit reports as required.
RELATED EVENTS:
INF-EXPO-6904
REFERENCES:
1. JP 3-68 Noncombatant Evacuation Operations
2. MCDP 1-0 Marine Corps Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17962 MOUT Collective Training Facility (Small)
SUPPORTED MET(S): 3
EVENT COMPONENTS:
1. Conduct BAMCIS.
2. Conduct movement to objective area.
3. Conduct security, search, and recovery operations.
4. React to enemy actions.
5. Withdraw to friendly lines or other safe haven.
6. Debrief and report to higher headquarters.
RELATED EVENTS:
INF-MAN-6117 INF-EXPO-6905
REFERENCES:
1. JP 3-50.2 Doctrine For Joint Combat Search and Rescue
2. MCWP 3-24 Assault Support
SUPPORT REQUIREMENTS:
6-18
NAVMC 3500.44
19 Sep 08
SUPPORTED MET(S): 1, 3, 6
EVENT COMPONENTS:
1. Search detainees immediately after capture.
2. Tag and evacuate weapons, documents, and items of potential intelligence
value at the same time as detainees.
3. Return personnel items, protective clothes, and equipment to the
detainees.
4. Segregate detainees by type and gender - Officers, NCO, unranked, civilian
combatants, etc.
5. Detainees are prevented from conversing among themselves.
6. Detainees are processed quickly to obtain maximum intelligence benefit.
7. Report perishable information obtained from detainees immediately to
higher headquarters.
8. Ensure detainees are safeguarded from abuse and the hazards of enemy fire
9. Treat enemy casualties with the same medical care and MEDEVAC priority as
friendly casualties. Any difference in treatment is based solely on
medical reasons.
CHAINED EVENTS:
INF-MAN-4101
RELATED EVENTS:
INF-MAN-6101
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCRP 4-11.8C Enemy Prisoners of War and Civilian Internees
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17904 Prisoner Of War Training Area
MISCELLANEOUS:
6-19
NAVMC 3500.44
19 Sep 08
ADMINISTRATIVE INSTRUCTIONS:
1. An event scenario must be provided that incorporates the requirements
to facilitate training to standard.
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. The unit leader reports the obstacle to higher headquarters.
2. Establish over watch.
3. Conducts reconnaissance for enemy positions and of the breach site.
4. Employ organic and/or supporting fires to suppress the enemy.
5. Secure and obscure the breach site.
6. Reduce the obstacle/barrier.
7. Inspect, proof and mark the breach site.
8. Remaining elements of the unit move through the breach lane.
9. Report the location of the breach to higher headquarters.
RELATED EVENTS:
INF-MAN-6102 INF-MAN-4102
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-17.3 MAGTF Breaching Operations
3. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
4. TM 9-1375-213-12 Demolition Materials
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B519 Cartridge, 40mm Target Practice M781 1
A059 Cartridge, 5.56mm Ball M855 10/Clip 5
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 20
G930 Grenade, Hand Smoke HC AN-M8 2
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. 40 Marines attacking 10 enemy. Enemy on 2 hit kill. Cover and move
vice fire and move through objective.
6-20
NAVMC 3500.44
19 Sep 08
SUPPORTED MET(S): 1
CONDITION: Given a platoon sized unit with a mission and commander's intent
while wearing a fighting load.
EVENT COMPONENTS:
1. Map reconnaissance is conducted and tentative positions are identified.
2. The quartering party/guides are organized and reconnoiter the tentative
assembly area.
3. As the unit approaches, guide leads it to selected or designated areas.
4. Sectors of the perimeter are assigned to subordinate units to ensure
mutual support and to cover all gaps by observation and fire
5. The priorities of work are established and followed.
6. Security plan is established.
7. Coordinate with higher and adjacent units.
8. A sector sketch is forwarded to higher headquarters. Unit retains a copy.
RELATED EVENTS:
INF-MAN-6105
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCRP 3-41.1A MAGTF Rear Area Security
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1
6-21
NAVMC 3500.44
19 Sep 08
EVENT COMPONENTS:
1. Reconnoiter the tentative position and the routes to it.
2. Ensure the position provides observation of the objective and overwatch
3. Unit provides for own security.
4. Ensure position enables the support element to place suppressive fire to
support the scheme of maneuver.
5. Assign positions, sectors of fire, engagement criteria and other fire
control measures (TRP, RFAs, and phase lines) to support the scheme of
maneuver.
6. Maintain continuous communications with and, if possible, observation of
the maneuver unit.
7. Alerts the assault element of any detected/observed enemy or changes in
the objective.
8. Initiates, shifts, and ceases fire on signal or when the assault begins in
accordance with the scheme of maneuver. Displace in accordance with
operation order.
9. Unit prepares for follow on missions at the conclusion of the attack.
RELATED EVENTS:
INF-MAN-6106
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17730 Fire And Movement Range
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
SUPPORTED MET(S): 1
6-22
NAVMC 3500.44
19 Sep 08
STANDARD: The unit reacts to the enemy and the situation based on the
commander's intent, maintaining control of all elements and awareness of
subordinate and adjacent unit positions and actions.
EVENT COMPONENTS:
1. React per developed Standard Operating Procedures (SOPs), rehearsed
immediate action drills, or in accordance with commander's intent.
2. Elements maintain awareness of adjacent unit locations.
3. Determine the enemy's location and disposition.
4. Forward an initial SITREP.
5. Conduct an assessment of the situation and issue a verbal fragmentary
order that specifies an objective and provides control measures.
6. Set conditions to support follow on operations.
7. Consolidate, reorganize, and submit reports per Standard Operating
Procedures.
RELATED EVENTS:
INF-MAN-6107
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 40
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 120
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
SUPPORTED MET(S): 1
STANDARD: To operate a command post and conduct patrols from the patrol base.
6-23
NAVMC 3500.44
19 Sep 08
EVENT COMPONENTS:
1. Reconnoiter the patrol base.
2. A portion of the security team remains in the patrol base while the
Platoon Commander and the remainder returns to the main body.
3. The Platoon Commander brings the rest of the unit forward.
4. The rear security element camouflages the trail from the security position
to the patrol base.
5. Occupy the patrol base by deploying in a controlled manner and
establishing a perimeter.
6. Use only one point of entry and exit when possible.
7. Establish temporary observation posts. As a minimum, establish an
observation post to observe the route the unit used to enter the patrol
base.
8. Conduct reconnaissance to the limits of the unit's direct fire weapons to
identify any signs of enemy activity, suitable observation post locations,
possible rally points, withdrawal routes, and dead space.
9. Designate withdrawal routes, rally points, alternate patrol base, and
observation post positions. Create a signal plan to support your
withdrawal plan and rehearse.
10. Establish or modify standard operating procedures for defensive work
priorities.
11. Develop a fire plan sketch.
12. Establish communications with higher headquarters, OPs, and throughout the
unit.
13. Permit only necessary movement within the patrol base.
14. Continuously enforce security, continuing actions, noise, light,
camouflage discipline, and rest plan.
15. Emplace early warning devices on avenues of approach.
16. Conduct command post operations within the patrol base. Leaders in the
patrol base continue to plan and prepare for the mission and units conduct
patrols.
17. Establish an alternate patrol base to be used in case you are compromised
or need to relocate after a period of time.
18. After departure, remove or conceal all signs of the unit's presence.
RELATED EVENTS:
INF-MAN-6109 INF-MAN-6108
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-11.3 Scouting and Patrolling
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1
6-24
NAVMC 3500.44
19 Sep 08
EVENT COMPONENTS:
1. Conduct BAMCIS.
2. Move to attack position.
3. Cross the Line of Departure (LD).
4. Move to assault position.
5. Utilize the PLD where applicable.
6. Employ supporting arms IAW fire support plan.
7. Reduce fortified positions and clear trench lines.
8. Reduce an obstacle.
9. Pursue by fire.
10. Consolidates and re-organizes.
11. Prepare for possible counterattack.
RELATED EVENTS:
INF-0341-4101 INF-0352-4101 INF-0351-4101
INF-0331-4102 INF-0341-5101 INF-0352-7101
INF-MAN-6120 INF-MAN-6111 INF-MAN-6112
INF-MAN-6114 INF-MAN-6115 INF-MAN-6116
INF-MAN-6117 INF-0331-5102
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
AX11 Cartridge, 9mm Spotting Rifle MK212 2 per platoon
B519 Cartridge, 40mm Target Practice M781 3 per weapon
C995 Cartridge and Launcher, 84mm M136 AT 1
G930 Grenade, Hand Smoke HC AN-M8 2 per platoon
G811 Grenade, Hand Practice Body M69 1 per team
A059 Cartridge, 5.56mm Ball M855 10/Clip 10 per weapon
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 30 per weapon
G878 Fuze, Hand Grenade Practice M228 1 per team
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
6-25
NAVMC 3500.44
19 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. 30 rounds per M249 at a relation of 3 times the rifleman allocation.
2. Attack assumes a reinforced platoon assaulting a fortified objective
defended by an enemy rifle squad. Targets on 2 hit kill.
3. Mortars HE allow 4 minutes for machineguns to move into, occupy and
fire from their position.
4. Machineguns allow 10 minutes of suppression at 5 seconds between
impacts on one objective.
5. Assumes a mechanical breach of obstacle
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct BAMCIS.
2. Assign each element a withdrawal plan.
3. Conduct movement to the ORP.
4. Emplace security.
5. Emplace support element.
6. Conduct actions on the objective.
7. On order, the unit withdraws from the objective.
8. Account for all personnel prior to the final withdrawal.
9. Execute withdrawal.
RELATED EVENTS:
INF-MAN-6113
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-41.2 Raid Operations
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 30 per weapon
A059 Cartridge, 5.56mm Ball M855 10/Clip 10 per weapon
B519 Cartridge, 40mm Target Practice M781 1 per weapon
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
6-26
NAVMC 3500.44
19 Sep 08
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct BAMCIS.
2. Cross LD.
3. Establish ORP.
4. Conduct leader's recon of ambush site.
5. Post security at ambush site.
6. Load security element into ambush site.
7. Load support element into ambush site.
8. Load assault element into ambush site.
9. Initiate ambush.
10. Search kill zone.
11. Remove assault element from ambush site to ORP.
12. Remove support element from ambush site to ORP.
13. Remove security element from ambush site to ORP.
14. Employ fire support plan to isolate objective and mask departure.
15. Return to friendly lines.
16. Conduct after action review.
RELATED EVENTS:
INF-MAN-6108
REFERENCES:
1. MCWP 3-11.3 Scouting and Patrolling
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 10 per weapon
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 30 per weapon
B519 Cartridge, 40mm Target Practice M781 1 per weapon
6-27
NAVMC 3500.44
19 Sep 08
RANGE/TRAINING AREA:
Facility Code 17753 Automated Infantry Platoon Battle Course
Facility Code 17752 Infantry Platoon Battle Course
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. All targets must be destroyed by organic weapons to accomplish this
task to standard.
2. Live ammunition is preferred if training facilities are available but
this task can be accomplished to standard with blank ammunition.
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct reconnaissance to find gaps, surfaces, and routes in an enemy
area.
2. Conduct passage of lines.
3. Break down into infiltrating elements at designated release points.
4. Record and report any enemy fire.
5. Conduct linkup of all elements by the specified time.
6. Move to an Objective Rally Point (ORP).
7. Report to higher headquarters, if required, and continue the mission.
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-11.3 Scouting and Patrolling
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 2
6-28
NAVMC 3500.44
19 Sep 08
EVENT COMPONENTS:
1. Conduct BAMCIS.
2. Establish local security plan.
3. Determine tactical control measures.
4. Establish target precedence list.
5. Develop engagement/disengagement criteria.
6. Set rates of fire for all weapons.
7. Consolidate subordinate fire plan sketches into one fire plan sketch and
submit the platoon sketch to higher headquarters.
8. Report information acquired by security elements to higher headquarters.
9. Implement priorities of work (S.A.F.E.).
10. Execute continuing actions.
RELATED EVENTS:
INF-MAN-4132 INF-MAN-6132
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCRP 3-11.1A Commander's Tactical Handbook
3. MCWP 3-11.2 Marine Rifle Squad
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B519 Cartridge, 40mm Target Practice M781 3 per wpn
A059 Cartridge, 5.56mm Ball M855 10/Clip 40 per wpn
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Small arms to build range cards, assuming 4 TRPs, 1 FPL or PDF.
2. All environments applicable (i.e., urban).
SUPPORTED MET(S): 2
6-29
NAVMC 3500.44
19 Sep 08
EVENT COMPONENTS:
1. Establish delaying positions.
2. Employ supporting arms if necessary.
3. Withdraw the least engaged elements first.
4. Establish flank, advance, or rear guard security.
5. Submit reports as required.
6. Avoid decisive engagements while maintaining contact with the enemy.
7. Employ use of remain behind technique to deceive the enemy.
8. Establish link up plan for remain behind force.
9. Establish forces to delay the enemies approach.
10. Plan to execute counterattacks.
11. Execute diversionary patrols to mask the withdrawal.
12. Maintain dispersion.
RELATED EVENTS:
INF-0351-4102 INF-0331-4103 INF-0331-4107
INF-MAN-4133 INF-0331-5107 INF-WPNS-5309
INF-MAN-6133 INF-0331-5103
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-11.2 Marine Rifle Squad
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17560 Sniper Field-Fire Range
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17830 Light Demolition Range
Facility Code 17905 Mine Warfare Area
Facility Code 17936 Close Air Support Range
SUPPORTED MET(S): 1, 3, 6
6-30
NAVMC 3500.44
19 Sep 08
EVENT COMPONENTS:
1. Conduct BAMCIS.
2. Move to the objective rally point (ORP).
3. Establish security.
4. Interact with civilians to gain cooperation from the local residents and
gather information about search objectives.
5. Search and/or interview all civilians/non-combatants for suspected enemy
personnel.
6. Search designated area IAW mission.
7. Avoid unnecessary force or damage to civilian property.
8. Immediately report and attempt to exploit information gained from
questioning civilians, detainees or from hidden caches.
9. Conduct retrograde.
10. Submit all required reports.
RELATED EVENTS:
INF-MAN-6710 INF-PAT-6141
REFERENCES:
1. MCIP 3-33.01 Small Unit Leader's Guide to Counterinsurgency
2. MCRP 3-31.4B Mutli-service Tactics, Techniques, and Procedures for Cordon
and Search Operations
3. MCWP 3-33.5 Counterinsurgency Operations
4. BUST Handbook
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17962 MOUT Collective Training Facility (Small)
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct BAMCIS.
2. Prepare a vehicle for operations.
3. Screen forward, flank or rear of a stationary unit.
4. React to a vehicle roll over.
5. Defend against IEDs.
6-31
NAVMC 3500.44
19 Sep 08
RELATED EVENTS:
INF-MOBL-6150
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCRP 4-11.3F Convoy Operations Handbook
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 20 per wpn
B519 Cartridge, 40mm Target Practice M781 3 per wpn
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 120 per wpn
G930 Grenade, Hand Smoke HC AN-M8 1
G955 Grenade, Hand Violet Smoke M18 1
B535 Cartridge, 40mm White Star Parachute 3 per wpn
L307 Signal, Illumination Ground White St 1 per vehicle
L314 Signal, Illumination Ground Green St 1 per vehicle
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 6
EVENT COMPONENTS:
1. Conduct BAMCIS.
2. Conduct movement to contact.
3. Report crossing of tactical control measures and all reports.
4. Conduct the reconnaissance.
5. Isolate the objective with direct and indirect fires.
6. Suppress enemy positions.
6-32
NAVMC 3500.44
19 Sep 08
RELATED EVENTS:
INF-MOUT-4808 INF-MOUT-4809 INF-MOUT-4810
INF-MOUT-6801 INF-MOUT-4814 INF-MOUT-5803
INF-MOUT-4813
REFERENCES:
1. FM 90-10-1 Infantryman's Guide to Combat in Built-Up Areas
2. FMFM 6-4 Marine Rifle Company/Platoon
3. MCWP 3-11.2 Marine Rifle Squad
4. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
5. BUST Handbook
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
G878 Fuze, Hand Grenade Practice M228 1
A080 Cartridge, 5.56mm Blank M200 Single 20
G811 Grenade, Hand Practice Body M69 1
RANGE/TRAINING AREA:
Facility Code 17962 MOUT Collective Training Facility (Small)
Facility Code 17760 MOUT Assault Course (MAC)
SUPPORTED MET(S): 6
EVENT COMPONENTS:
1. Conduct BAMCIS.
2. Depart friendly lines.
3. Conduct assigned mission (RACES).
4. Employ tactical control measures.
5. Utilize unit SOPs when encountering danger areas.
6. Maintain all-around security.
6-33
NAVMC 3500.44
19 Sep 08
RELATED EVENTS:
INF-MOUT-6801
REFERENCES:
1. FM 3-07 Stability Operations and Support Operations
2. FMFM 6-4 Marine Rifle Company/Platoon
3. MCWP 3-11.2 Marine Rifle Squad
4. MCWP 3-11.3 Scouting and Patrolling
5. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17962 MOUT Collective Training Facility (Small)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. One of the "react to contact" skills may be to react to a hostile
crowd.
SUPPORTED MET(S): 2, 3, 6
EVENT COMPONENTS:
1. Establish a canalization zone to force vehicles into the checkpoint.
2. Establish a turning or deceleration zone to slow approaching vehicles.
3. Establish a search zone. Personnel and vehicles will be searched
separately.
4. Establish a safe zone for Marines to eat/sleep in relative security.
RELATED EVENTS:
INF-MOUT-4814 INF-MOUT-4813
REFERENCES:
1. BUST Handbook
6-34
NAVMC 3500.44
19 Sep 08
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 2 per wpn
A059 Cartridge, 5.56mm Ball M855 10/Clip 2 per wpn
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17962 MOUT Collective Training Facility (Small)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Demonstrate live fire escalation of force to disable an approaching
vehicle on a live fire range by shooting the grill.
SUPPORTED MET(S): 1, 2, 3, 6
STANDARD: The mortar platoon provides indirect fires in support of a unit and
achieves commander's intent.
EVENT COMPONENTS:
1. Receive call for fire from supported unit.
2. Prepare and issue fire commands to the gun line.
3. Adjust fires as necessary.
4. Provide forward observers to units as required.
5. Provide local security for the mortar platoon.
RELATED EVENTS:
INF-0341-4100 INF-0341-5100 INF-FSPT-6302
INF-0341-5102 INF-FSPT-6301 INF-0341-5101
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. MCRP 3-15.2A Mortars
3. MCRP 3-15.2B Mortar Gunnery
SUPPORTED MET(S): 1, 2, 3, 6
6-35
NAVMC 3500.44
19 Sep 08
EVENT COMPONENTS:
1. Commander identifies the position to be occupied and displacement
technique and organizes platoon to provide an advance party.
2. The advance party verifies the position, establishes and maintains local
security, marks mortar positions, and provides guides in accordance with
unit SOP.
3. Before moving, the commander informs higher headquarters of the move and
ensures accountability of personnel and equipment.
4. Main body displaces, conducts link up with advance party and occupies the
position per unit SOP.
5. Commander informs higher headquarters upon completion of the move.
RELATED EVENTS:
INF-0341-5100 INF-0341-4100
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. MCRP 3-15.2A Mortars
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1, 2, 3, 6
STANDARD: All guns in the platoon are laid to within one mil.
EVENT COMPONENTS:
1. The gun line is laid in the general direction of fire.
2. One gun is laid using a declinated M2 compass.
3. Remaining guns are laid per unit SOP using the first gun as the aiming
point.
RELATED EVENTS:
INF-0341-4100 INF-0341-5100
REFERENCES:
1. MCRP 3-15.2B Mortar Gunnery
6-36
NAVMC 3500.44
19 Sep 08
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1, 2, 3, 6
CONDITION: Given a mission that requires fire support of two (2) independent
missions or continual fire support for a fast moving attack.
STANDARD: The mortar platoon provides fire support for two independent
missions or continual fire support for a fast moving attack. The platoon
divides into two firing sections.
EVENT COMPONENTS:
1. Each section moves as an independent element.
2. Each section's designated firing position supports the ground unit's
scheme of maneuver.
3. Status and location of both sections is monitored.
4. At least one unit can provide indirect fires to the ground unit at all
times.
5. The appropriate section responds to requests for fire according to its
mission.
6. Section Fire Direction Center (FDC) computes data and issues fire commands
for their own mortars.
7. When both sections are supporting the same mission, sections compute their
own firing data for fire missions received by the other section.
RELATED EVENTS:
INF-0341-5102 INF-0341-5100
REFERENCES:
1. MCRP 3-15.2A Mortars
2. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be evaluated in conjunction with relevant firing
tasks, whenever possible (hip shoots, simultaneous missions, etc.). It
can, however, be executed and evaluated in a maneuver area only.
2. Each section should be required to displace at least twice, with the
platoon maintaining the ability to provide continuous fire support.
6-37
NAVMC 3500.44
19 Sep 08
SUPPORTED MET(S): 2
STANDARD: The unit issues an order, makes necessary adjustments to the plan
as the situation develops and changes, completes the priorities of work by the
time specified, maintains security, and coordinates mutually supporting fires,
achieving the commander's intent.
EVENT COMPONENTS:
1. In accordance with the operation order, coordinate and occupy defensive
positions that are integrated with the direct, indirect fire, and obstacle
plans.
2. Unit issues order, which at a minimum includes specific instructions on
the mission, intent, control and coordinating measures, fire pattern and
priority, fires in support, obstacles/barriers, engagement and
disengagement criteria, trigger point/lines, maximum and minimum
engagement lines, and friendly positions.
3. Weapons are assigned primary and alternate positions that provide
observation over the main avenues of approach, range is known to likely
engagement points, and security is coordinated for the crew-served weapons
positions.
4. Fire plan sketches are compiled and submitted to higher and/or supported
units.
5. Coordinate, control, and integrate fires to defeat the enemy's assault.
6. Process casualties and detainees as required.
7. Submit reports to higher headquarters as required.
RELATED EVENTS:
INF-0352-5100 INF-0352-4100
REFERENCES:
1. FM 17-97 Regimental Armored Cavalry Troop
2. FM 17-98 Scout Platoon
3. FMFM 6-3 Marine Infantry Battalion
4. FMFM 6-4 Marine Rifle Company/Platoon
5. MCWP 3-11.2 Marine Rifle Squad
6. MCWP 3-15.5 Anti-armor Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17610 Grenade Launcher Range
Facility Code 17631 Light Antiarmor Weapons Range Live
6-38
NAVMC 3500.44
19 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Unit may be supported by attachments to form combined anti-armor teams
(i.e., Heavy machineguns)
2. Unit can be mounted or dismounted
6-39
NAVMC 3500.44
16 Sep 08
CHAPTER 7
PARAGRAPH PAGE
7-1
NAVMC 3500.44
16 Sep 08
CHAPTER 7
7001. ADMINISTRATIVE NOTES. T&R events are coded for ease of reference.
Each event has a 4-4-4 digit identifier. The first four digits represent the
occupational field, "INF". The second four digits represent the functional
or duty area (e.g. Fire Support Planning (FSPT), Communications (COMM),
etc.). The last four digits represent the level, and identifier number of
the event. The squad/fire team collective events are in the 4000/3000
levels. Every event has a unique identifier number from 001 to 999.
7-2
NAVMC 3500.44
16 Sep 08
7-3
NAVMC 3500.44
16 Sep 08
7-4
NAVMC 3500.44
16 Sep 08
Maneuver
INF-MAN-3102 Breach an obstacle (D) 7-55
INF-MAN-3109 Conduct patrolling operations (D) 7-56
INF-MAN-3111 Conduct offensive operations (D) 7-56
INF-MAN-3132 Conduct defensive operations (D) 7-57
MOBL
React to an unexploded Improvised Explosive
INF-MOBL-3150 7-58
Device (IED) (A)
Defend against mines and booby traps during
INF-MOBL-3152 7-59
motorized movement (B)
MOUT
INF-MOUT-3801 Execute upper-level building entry (B) 7-60
Sniper
Perform sniper team movement to the final firing
INF-0317-3901 7-61
position (FFP) (D)
Engage targets with coordinated shooting on
INF-0317-3902 7-62
command (D)
INF-0317-3903 Execute sniper team immediate action drills (D) 7-63
7-5
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Develop security plan.
2. Coordinate with adjacent units.
3. Ensure mutual support of both guns.
4. Prepare fire plan sketch.
5. Conduct continuing actions.
RELATED EVENTS:
INF-0331-3100 INF-0331-5100
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17582 Automated Multipurpose Machine Gun Range (MPMG)
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Set security.
2. Select type of position.
3. Entrench the position.
4. Establish communication.
7-6
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-0331-5101
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17582 Automated Multipurpose Machine Gun Range (MPMG)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Entrenching will encompass the actual gun position and the ammo-man
position.
2. The ammunition associated will be rolled forward appropriately into the
higher level event components.
3. The ammunition will be linked to the range card event component.
4. The supporting range needs to be developed to support range card
development with TRPs, FPLs, primary and alternate positions, etc.
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct mission analysis.
2. Task organize.
3. Emplace machinegun squad.
4. Engage targets according to the scheme of maneuver.
5. Control fires as directed.
6. Displace according to the scheme of maneuver.
7. Prepare for follow on missions.
7-7
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-0331-3102 INF-0331-4100 INF-0331-5102
INF-0331-5100 INF-0331-3100
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 2
EVENT COMPONENTS:
1. Conduct mission analysis.
2. Task organize.
3. Emplace machinegun squad.
4. Engage targets according to the scheme of maneuver.
5. Control fires as directed.
6. Displace to alternate or supplementary positions according to the scheme
of maneuver.
7. Prepare for follow on missions.
RELATED EVENTS:
INF-0331-3100 INF-0331-3103 INF-0331-5103
INF-0331-5100 INF-0331-4100
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
7-8
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 6
EVENT COMPONENTS:
1. Conduct mission analysis.
2. Task organize.
3. Emplace machinegun squad.
4. Engage targets according to the scheme of maneuver.
5. Control fires as directed.
6. Displace to alternate or supplementary positions according to the scheme
of maneuver.
7. Prepare for follow on missions.
RELATED EVENTS:
INF-0331-3100 INF-0331-3104 INF-0331-5104
INF-0331-4104 INF-0331-5100 INF-0331-4100
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
7-9
NAVMC 3500.44
16 Sep 08
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 3, 4
EVENT COMPONENTS:
1. Conduct mission analysis.
2. Task organize.
3. Emplace machinegun squad.
4. Engage targets according to the scheme of maneuver.
5. Control fires as directed.
6. Displace to alternate or supplementary positions according to the scheme
of maneuver.
7. Prepare for follow on missions.
RELATED EVENTS:
INF-0331-3100 INF-0331-3105 INF-0331-5105
INF-0331-5100 INF-0331-4100
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 1
7-10
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Conduct mission analysis.
2. Task organize.
3. Emplace machinegun squad.
4. Engage targets according to the scheme of maneuver.
5. Control fires as directed.
6. Displace according to the scheme of maneuver.
7. Prepare for follow on missions.
RELATED EVENTS:
INF-0331-4101 INF-0331-5106 INF-0331-5101
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
BA12 Cartridge, 40mm Practice MK 281 Mod 64
A576 Cartridge, Caliber .50 4 API M8/1 AP 200
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
2. Ammo accounts for 5 min of suppression.
3. DODIC B542 may be replaced by DODIC BA12.
SUPPORTED MET(S): 2
7-11
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Conduct mission analysis.
2. Task organize.
3. Emplace machinegun squad.
4. Engage targets according to the scheme of maneuver.
5. Control fires as directed.
6. Displace to alternate or supplementary positions according to the scheme
of maneuver.
7. Prepare for follow on missions.
RELATED EVENTS:
INF-0331-5101 INF-0331-5107 INF-0331-4101
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B542 Cartridge, 40mm HEDP M430/M430A1 Lin 64
A576 Cartridge, Caliber .50 4 API M8/1 AP 200
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
2. Ammo supports firing the FPF.
3. DODIC B542 maybe replaced by DODIC BA12.
SUPPORTED MET(S): 6
7-12
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Conduct mission analysis.
2. Assist in the development of the scheme of maneuver.
3. Task organize.
4. Direct the emplacement of the squad.
5. Coordinate with adjacent and supported units.
6. Engage targets according to the scheme of maneuver.
7. Displace to alternate or supplementary positions according to the scheme
of maneuver.
8. Prepare for follow on missions.
RELATED EVENTS:
INF-0331-4101 INF-0331-4106 INF-0331-5108
INF-0331-5101 INF-0331-4107
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
BA12 Cartridge, 40mm Practice MK 281 Mod 64
A576 Cartridge, Caliber .50 4 API M8/1 AP 200
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
2. 700 rounds of A576 for offense 5 min suppression.
3. 500 rounds of A576 for transition to defense.
4. B542 or BA12 is split evenly for offense and defense.
5. DODIC B542 may be replaced by DODIC BA12.
SUPPORTED MET(S): 1, 2, 3, 6
7-13
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Set security.
2. Construct mortar.
3. Establish communication.
4. Mount the mortar.
5. Lay the mortar.
6. Construct supplementary fighting position.
7. Construct alternate fighting position if applicable.
8. Perform continuing actions.
9. Set security.
10. Construct mortar.
11. Establish communication.
12. Mount the mortar.
13. Lay the mortar.
14. Construct supplementary fighting position.
15. Construct alternate fighting position if applicable.
16. Perform continuing actions.
RELATED EVENTS:
INF-0341-5100
REFERENCES:
1. MCRP 3-15.2A Mortars
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17670 Mortar Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Mortar team members will conduct the performance steps, working
interchangeably.
2. DODICS can be substituted with B647 60mm Illum, and C871 81mm Illum.
3. Entrenching will encompass both gun position and ammo pit.
SUPPORTED MET(S): 1, 2, 3, 6
7-14
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Move in accordance with the scheme of maneuver.
2. Emplace mortar squad.
3. Engage targets according to the scheme of maneuver.
4. Control fires as directed.
5. Displace according to the scheme of maneuver.
6. Move in accordance with the scheme of maneuver.
7. Prepare for follow on missions.
8. Emplace mortar squad.
9. Engage targets according to the scheme of maneuver.
10. Control fires as directed.
11. Displace according to the scheme of maneuver.
12. Prepare for follow on missions.
RELATED EVENTS:
INF-0341-4100 INF-WPNS-5303 INF-0341-5101
INF-0341-5100
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. MCRP 3-15.2A Mortars
3. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17670 Mortar Range
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Emplace mortar squad.
2. Engage targets according to the scheme of maneuver.
3. Control fires as directed.
4. Displace according to the scheme of maneuver.
5. Prepare for follow on missions.
7-15
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-0341-4100 INF-WPNS-5303 INF-0341-5102
INF-0341-5100
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. MCRP 3-15.2A Mortars
3. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17670 Mortar Range
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Respond to fire commands.
2. Engage targets with FDC.
3. Engage targets without FDC.
RELATED EVENTS:
INF-0341-4101 INF-0341-4100 INF-0341-4102
INF-0341-5104 INF-0341-5101 INF-0341-5102
INF-0341-5103 INF-0341-5100
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. MCRP 3-15.2A Mortars
3. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B642 Cartridge, 60mm High Explosive M720 11
B647 Cartridge, 60mm Illuminating M721 4
C871 Cartridge, 81mm Illuminating M853A1 2
C869 Cartridge, 81mm HE M889/M889A1 with 6
7-16
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17670 Mortar Range
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Develop security plan.
2. Coordinate with adjacent units.
3. Ensure mutual support of both weapon systems.
4. Prepare fire plan sketch.
5. Conduct continuing actions.
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct mission analysis.
2. Assist in the development of the scheme of maneuver.
3. Task organize.
4. Direct the emplacement of the squad.
5. Coordinate with adjacent and supported units.
6. Engage targets using rockets.
7. Breach obstacles as directed.
8. Conduct demolitions as directed.
9. Displace to alternate or supplementary positions according to the scheme
of maneuver.
10. Prepare for follow on missions.
7-17
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-0351-3101 INF-0351-4100 INF-0351-3102
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. FM 5-34 Engineer Field Data - Field Expedient Charges
3. FMFM 6-4 Marine Rifle Company/Platoon
4. TM 013750-13&P Operators Manual MK-7 MOD. 1 Anti-Personnel Obstacle
Breaching System (APOBS)
5. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
LX21 Simulator, Noise Assault Rocket Trai 2 per squad
HX05 Rocket, 83mm Assault MK3 Mod 0 (SMAW 1 per squad
HX07 Rocket, 83mm HEAA Practice MK7 Mod 0 1 per squad
RANGE/TRAINING AREA:
Facility Code 17640 Antiarmor Tracking And Live-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be enhanced utilizing simulation.
SUPPORTED MET(S): 2
EVENT COMPONENTS:
1. Conduct mission analysis.
2. Assist in the development of the scheme of maneuver.
3. Task organize.
4. Direct the emplacement of the squad.
5. Coordinate with adjacent, supported, and supported units.
6. Engage targets using rockets.
7. Conduct demolitions as directed.
7-18
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-0351-3103 INF-MAN-5102 INF-0351-4100
INF-0351-3104
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. FMFM 6-4 Marine Rifle Company/Platoon
3. MCRP 3-17A Engineer Field Data (FM 5-34)
4. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17640 Antiarmor Tracking And Live-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be enhanced utilizing simulation.
SUPPORTED MET(S): 6
EVENT COMPONENTS:
1. Conduct mission analysis.
2. Assist in the development of the scheme of maneuver.
3. Task organize.
4. Direct the emplacement of the squad.
5. Coordinate with adjacent, supported, and supported units.
6. Engage targets using rockets.
7. Breach obstacles as directed.
8. Conduct demolitions as directed.
9. Displace to alternate or supplementary positions according to the scheme
of maneuver.
10. Prepare for follow on missions.
7-19
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-0351-3105 INF-0341-4100 INF-MOUT-5801
INF-0351-4102 INF-MAN-5102 INF-0351-4101
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. FMFM 6-4 Marine Rifle Company/Platoon
3. MCRP 3-17A Engineer Field Data (FM 5-34)
4. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
HA34 Rckt 83mm HE, SMAW-NE, MK80-0 1
LX21 Simulator, Noise Assault Rocket Trai 2
HX05 Rocket, 83mm Assault MK3 Mod 0 (SMAW 1
RANGE/TRAINING AREA:
Facility Code 17640 Antiarmor Tracking And Live-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be enhanced utilizing simulation.
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Analyze the mission.
2. Select type of position.
3. Set security.
4. Prepare the position.
5. Establish communication.
6. Clear field of fire.
7. Prepare the fire plan sketch.
8. Develop ingress and egress routes.
7-20
NAVMC 3500.44
16 Sep 08
9. Camouflage positions.
10. Construct supplementary position.
11. Construct alternate position if applicable.
12. Perform continuing actions.
RELATED EVENTS:
INF-0352-3100 INF-0352-5100
REFERENCES:
1. FM 3-22.34 TOW Weapon System
2. FM 3-22.37 Javelin Medium Anti-armor Weapon System
3. TM 09397B-12/1 Operator and Organizational Maintenance Manual for Javelin
4. TM 9-1425-450-12 TOW Weapon System Guided Missile System
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. M220E4 TOW weapon system
2. M41A SABRE system.
3. M98A1 Javelin medium anti-armor weapon.
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Assist in the development of the scheme of maneuver.
2. Direct the emplacement of the squad.
3. Coordinate with adjacent, supporting and supported units.
4. Engage targets according to the scheme of maneuver.
5. Displace according to the scheme of maneuver.
6. Prepare for follow on missions.
RELATED EVENTS:
INF-0352-3100 INF-0352-3101 INF-0352-7101
INF-0352-5100 INF-0352-4100
REFERENCES:
1. MCWP 3-15.5 Anti-armor Operations
7-21
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Conduct systemic search of an area, building, room, or vehicle.
2. Use PSD; Photographs, Statements, Diagrams to document all "finds" where
and how items are found.
3. Collect all "finds" using best practices to minimize damage to
evidentiary/intelligence value.
4. Document all "finds" using proper chain of custody and inventory
documentation.
5. Consolidate all items after documenting where/how found.
6. Use Tactical Questioning (TQ) to complete details for evidence collection.
7. Ensure Site Exploitation (SE) minimizes damage for maximum intelligence
and evidence value and method is appropriate to gain/maintain support and
cooperation of occupants and other local civilians.
8. Effectively use SE kit as available (gloves, paper and plastic bags, tags,
explosive residue kit, finger-print kit, biometric systems, etc.).
9. Ensure SE is prioritized and efficient to minimize time in the objective
as appropriate.
10. Transport items and report debrief to higher IAW current local
requirements (timelines, detainee paperwork, evidentiary rules) and to
maximize intelligence/evidence value.
REFERENCES:
1. CALL 07-26 Tactical Site Exploitation and Cache Search Operations
2. ISBN: 9780160800863 USMC Site Exploitation: Evidence Collection - training
support package
7-22
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1, 3, 6
EVENT COMPONENTS:
1. Search detainee.
2. Tag detainee.
3. Report.
4. Evacuate detainee.
5. Segregate detainee.
6. Safe guard detainee.
7. Treat enemy casualties with the same medical care and med-evac priority as
friendly casualties.
RELATED EVENTS:
INF-MAN-5101
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCRP 4-11.8D Detainee Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17904 Prisoner Of War Training Area
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The acronym STRESS replaces the "5 S's and a T" for handling the
detainee. The term detainee supplants "EPW".
7-23
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. The unit leader identifies and reports obstacle.
2. Provide site security for the breaching element.
3. Secure and obscure the breach site.
4. Reduce the obstacle/barrier.
5. Inspect, proof and mark the breach site.
6. Report the location of the breach to higher headquarters.
RELATED EVENTS:
INF-0351-3102 INF-MAN-5102 INF-0351-3105
INF-0351-3104
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCWP 3-11.2 Marine Rifle Squad
3. MCWP 3-17.3 MAGTF Breaching Operations
4. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
5. TM 9-1375-213-12 Demolition Materials
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
Facility Code 17410 Maneuver/Training Area, Light Forces
EQUIPMENT:
1. Mechanical breaching kit (grappling hook, sledge hammer, halligan tool,
etc.).
SUPPORTED MET(S): 1
CONDITION: Given a squad sized unit with a mission and commander's intent
while wearing a fighting load.
7-24
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Map reconnaissance is conducted and tentative positions are identified.
2. The quartering party/guides are organized and reconnoiter the tentative
assembly area.
3. As the unit approaches, guide leads it to selected or designated areas.
4. Sectors of the perimeter are assigned to subordinate units to ensure
mutual support and to cover all gaps by observation and fire
5. The priorities of work are established and followed.
6. Security plan is established.
7. Coordinate with higher and adjacent units.
8. A sector sketch is forwarded to higher headquarters. Unit retains a copy.
RELATED EVENTS:
INF-MAN-5105
REFERENCES:
1. MCRP 3-41.1A MAGTF Rear Area Security
2. MCWP 3-11.2 Marine Rifle Squad
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Reconnoiter the tentative position and the routes to it.
2. Ensure the position provides observation of the objective and overwatch
3. Unit provides for own security.
4. Ensure position enables the support element to place suppressive fire to
support the scheme of maneuver.
5. Assign positions, sectors of fire, engagement criteria and other fire
control measures (TRP, RFAs, and phase lines) to support the scheme of
maneuver.
6. Maintain continuous communications with and, if possible, observation of
the maneuver unit.
7-25
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-MAN-5106
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 5 per weapon
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 15 per weapon
B519 Cartridge, 40mm Target Practice M781 1 per weapon
RANGE/TRAINING AREA:
Facility Code 17730 Fire And Movement Range
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
SUPPORTED MET(S): 1
STANDARD: The unit reacts to the enemy and the situation based on the
commander's intent, maintaining control of all elements and awareness of
adjacent unit positions and actions.
7-26
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. React per developed Standard Operating Procedures (SOPs), rehearsed
immediate action drills, or in accordance with commander's intent.
2. Elements maintain awareness of adjacent unit locations.
3. Determine the enemy's location and disposition.
4. Forward an initial SITREP.
5. Conduct an assessment of the situation and issue a verbal fragmentary
order that specifies an objective and provides control measures.
6. Set conditions to support follow on operations.
7. Consolidate, reorganize, and submit reports per Standard Operating
Procedures.
RELATED EVENTS:
INF-MAN-5107
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 5 per weapon
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 15 per weapon
B519 Cartridge, 40mm Target Practice M781 1 per weapon
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
SUPPORTED MET(S): 1
STANDARD: To operate a command post and conduct patrols from the patrol base.
7-27
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Reconnoiter the patrol base.
2. A portion of the security team remains in the patrol base while the squad
leader and the remainder returns to the main body.
3. The squad leader brings the rest of the unit forward.
4. The rear security element camouflages the trail from the security position
to the patrol base.
5. Occupy the patrol base by deploying in a controlled manner and
establishing a perimeter.
6. Use only one point of entry and exit when possible.
7. Establish temporary observation posts. As a minimum, establish an
observation post to observe the route the unit used to enter the patrol
base.
8. Conduct reconnaissance to the limits of the unit's direct fire weapons to
identify any signs of enemy activity, suitable observation post locations,
possible rally points, withdrawal routes, and dead space.
9. Designate withdrawal routes, rally points, alternate patrol base, and
observation post positions. Create a signal plan to support your
withdrawal plan and rehearse.
10. Establish or modify standard operating procedures for defensive work
priorities.
11. Develop a fire plan sketch.
12. Establish communications with higher headquarters, OPs, and throughout the
unit.
13. Permit only necessary movement within the patrol base.
14. Continuously enforce security, continuing actions, noise, light,
camouflage discipline, and rest plan.
15. Emplace early warning devices on avenues of approach.
16. Conduct command post operations within the patrol base. Leaders in the
patrol base continue to plan and prepare for the mission and units conduct
patrols.
17. Establish an alternate patrol base to be used in case you are compromised
or need to relocate after a period of time.
18. After departure, remove or conceal all signs of the unit's presence.
RELATED EVENTS:
INF-MAN-3109 INF-MAN-5109
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
2. MCWP 3-11.3 Scouting and Patrolling
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1
7-28
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Conduct BAMCIS.
2. Move to attack position.
3. Cross the Line of Departure (LD).
4. Move to assault position.
5. Utilize the PLD where applicable.
6. Employ supporting arms IAW fire support plan.
7. Reduce fortified positions and clear trench lines.
8. Reduce an obstacle.
9. Pursue by fire.
10. Consolidates and re-organizes.
11. Prepare for possible counterattack.
RELATED EVENTS:
INF-0341-4101 INF-0352-4101 INF-0351-4101
INF-MAN-5111 INF-0341-5101 INF-0352-7101
INF-0331-5102 INF-0331-4102
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B519 Cartridge, 40mm Target Practice M781 3 per weapon
C995 Cartridge and Launcher, 84mm M136 AT 1 per squad
G930 Grenade, Hand Smoke HC AN-M8 1 per squad
G811 Grenade, Hand Practice Body M69 1 per team
A059 Cartridge, 5.56mm Ball M855 10/Clip 5 per weapon
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 15 per weapon
G878 Fuze, Hand Grenade Practice M228 1 per team
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
7-29
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct BAMCIS.
2. Assign each element a withdrawal plan.
3. Conduct movement to the ORP.
4. Emplace security.
5. Emplace support element.
6. Conduct actions on the objective.
7. On order, the unit withdraws from the objective.
8. Account for all personnel prior to the final withdrawal.
9. Execute withdrawal.
RELATED EVENTS:
INF-MAN-5113
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
2. MCWP 3-41.2 Raid Operations
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 30 per weapon
A059 Cartridge, 5.56mm Ball M855 10/Clip 10 per weapon
B519 Cartridge, 40mm Target Practice M781 1 per weapon
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
7-30
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct BAMCIS.
2. Cross LD.
3. Establish ORP.
4. Conduct leader's recon of ambush site.
5. Post security at ambush site.
6. Load security element into ambush site.
7. Load support element into ambush site.
8. Load assault element into ambush site.
9. Initiate ambush.
10. Search kill zone.
11. Remove assault element from ambush site to ORP.
12. Remove support element from ambush site to ORP.
13. Remove security element from ambush site to ORP.
14. Employ fire support plan to isolate objective and mask departure.
15. Return to friendly lines.
16. Conduct after action review.
RELATED EVENTS:
INF-MAN-6108 INF-MAN-5124 INF-MAN-5109
INF-MAN-4109
REFERENCES:
1. MCWP 3-11.3 Scouting and Patrolling
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 30 per weapon
K143 Mine, Antipersonnel M18A1 with M57 F 1
B519 Cartridge, 40mm Target Practice M781 1 per weapon
A059 Cartridge, 5.56mm Ball M855 10/Clip 10 per weapon
RANGE/TRAINING AREA:
Facility Code 17753 Automated Infantry Platoon Battle Course
Facility Code 17752 Infantry Platoon Battle Course
MISCELLANEOUS:
7-31
NAVMC 3500.44
16 Sep 08
ADMINISTRATIVE INSTRUCTIONS:
1. All targets must be destroyed by organic weapons to accomplish this
task to standard.
2. Live ammunition is preferred if training facilities are available but
this task can be accomplished to standard with blank ammunition.
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct reconnaissance to find gaps, surfaces, and routes in an enemy
area.
2. Conduct passage of lines.
3. Break down into infiltrating elements at designated release points.
4. Record and report any enemy fire.
5. Conduct linkup of all elements by the specified time.
6. Move to an Objective Rally Point (ORP).
7. Report to higher headquarters, if required, and continue the mission.
RELATED EVENTS:
INF-MAN-5125
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
2. MCWP 3-11.3 Scouting and Patrolling
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 2
7-32
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Conduct BAMCIS.
2. Establish local security plan.
3. Determine tactical control measures.
4. Establish target precedence list.
5. Develop engagement/disengagement criteria.
6. Set rates of fire for all weapons.
7. Consolidate fireteam fire plan sketches into one fire plan sketch and
submit the squad sketch to higher headquarters.
8. Report information acquired by security elements to higher headquarters.
9. Implement priorities of work (S.A.F.E.).
10. Execute continuing actions.
RELATED EVENTS:
INF-MAN-5132
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCRP 3-11.1A Commander's Tactical Handbook
3. MCWP 3-11.2 Marine Rifle Squad
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B519 Cartridge, 40mm Target Practice M781 3 per wpn
A059 Cartridge, 5.56mm Ball M855 10/Clip 40 per wpn
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Small arms to build range cards, assuming 4 TRPs, 1 FPL or PDF.
2. All environments applicable (i.e., urban).
SUPPORTED MET(S): 2
EVENT COMPONENTS:
1. Establish delaying positions.
2. Employ supporting arms if necessary.
7-33
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-0351-4102 INF-0331-4103 INF-MAN-6133
INF-0351-3104 INF-0331-3103 INF-0351-3103
INF-MAN-5133
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-11.2 Marine Rifle Squad
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17560 Sniper Field-Fire Range
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17830 Light Demolition Range
Facility Code 17905 Mine Warfare Area
Facility Code 17936 Close Air Support Range
SUPPORTED MET(S): 1, 3, 6
EVENT COMPONENTS:
1. Conduct BAMCIS.
2. Move to the objective rally point (ORP).
3. Establish inner and outer cordons.
4. Interact with civilians to gain cooperation from the local residents and
gather information about search objectives.
7-34
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-MAN-5710 INF-PAT-6141
REFERENCES:
1. MCIP 3-33.01 Small Unit Leader's Guide to Counterinsurgency
2. MCRP 3-31.4B Mutli-service Tactics, Techniques, and Procedures for Cordon
and Search Operations
3. MCWP 3-33.5 Counterinsurgency Operations
4. BUST Handbook
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17962 MOUT Collective Training Facility (Small)
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 6
EVENT COMPONENTS:
1. Cover entry point and all danger areas.
2. Prepare for entry.
3. Acknowledge readiness.
4. Check accessibility of entry point.
5. Set a breach if required.
6. Obtain command or signal to enter the objective.
7. Employ diversions if required.
8. Execute breach if one is set.
9. Clear entry point.
10. Enter the objective.
7-35
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-MOUT-5801 INF-MOUT-3801
REFERENCES:
1. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17760 MOUT Assault Course (MAC)
Facility Code 17962 MOUT Collective Training Facility (Small)
SUPPORTED MET(S): 6
STANDARD: In accordance with unit SOPs and the listed component events.
EVENT COMPONENTS:
1. Unit leader maneuvers the unit to get behind available cover, firing
positions.
2. Identify the position or direction the shot(s) came from.
3. Cut-off likely escape routes.
4. Contain, assault, or clear the target objective.
5. Cordon off the area to prevent reinforcement and local populace
interference, if applicable.
6. Identify the firing point and search.
RELATED EVENTS:
INF-MOUT-5803 INF-MOUT-5801
REFERENCES:
1. BUST Handbook
2. Unit Standard Operating Procedures (SOP)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17760 MOUT Assault Course (MAC)
Facility Code 17962 MOUT Collective Training Facility (Small)
SUPPORTED MET(S): 6
7-36
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Unit organized into room clearing teams.
2. The room clearing teams carry as much ammunition as possible, especially
extra grenades.
3. Move to the designated building and identify an entry point.
4. If an entry into the building has not been cleared by friendly units,
prepare to conduct entry with available assets.
5. If an entry in the building has not been cleared by friendly units, the
unit enters the building by: approaching from the enemy flank or read;
blowing an entrance through a wall; throwing grenades through doors or
windows hard enough to prevent enemy from retrieving the grenade and
throwing it back.
6. Once inside the building, the lead element secures the entry point and
covers staircases and other routes leading to upper and lower stories.
7. The entry point is clearly marked.
8. The room clearing teams clear rooms.
9. Rooms that overlook approaches to the building are cleared first.
10. The cleared rooms are marked in accordance with the unit Standard
Operating Procedure (SOP).
11. Clear all rooms in the assigned area.
12. Consolidate, redistribute ammunition, treat wounds, and establish a hasty
defense.
13. Conduct personnel search of occupants. Method facilitates search
objectives.
14. Tactically question occupants. Questioning facilitates search objectives
and is IAW higher's collection plan.
15. Conduct information operations (IO) on occupants. Non-kinetic effects
account for tactical cultural awareness, facilitate search objectives, are
IAW with higher's IO plan, and all products/talking points have been
approved by the appropriate authority. This includes "brush-off" as
appropriate.
16. Consolidate/segregate occupants and use the head of the household to
facilitate search objectives, tactical questioning, non-kinetic effects
IAW the situation (initial pre-search inspection of objective documented
with head of the household as witness, allow head of household to
accompany searching elements, have head of household open doors/drawers
etc.).
17. Search minimizes damage for maximum intelligence and evidence value and
method is appropriate to gain/maintain support and cooperation of
occupants and other local civilians.
18. The unit continues its mission.
RELATED EVENTS:
INF-MOUT-3801 INF-MOUT-5801 INF-MOUT-4808
REFERENCES:
1. FM 21-75 Combat Skills of the Soldier
2. FMFM 6-4 Marine Rifle Company/Platoon
3. MCWP 3-11.2 Marine Rifle Squad
7-37
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17760 MOUT Assault Course (MAC)
Facility Code 17962 MOUT Collective Training Facility (Small)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Live ammunition is preferred if training facilities are available but
this task can be accomplished to standard with blank ammunition.
SUPPORTED MET(S): 2, 3, 6
EVENT COMPONENTS:
1. Team members assume positions before the vehicle is stopped.
2. The TL and SAW gunner/cover man will wave down and stop the vehicle.
3. For left hand drive vehicles the SAW gunner should start on the TL's left
side where he can maintain a clear line of fire to the vehicle.
4. Additional riflemen provide spherical security, cut-off, observation of
approaches from front and back of vehicle, and maintain awareness of upper
stories of surrounding buildings.
5. Search the vehicle.
RELATED EVENTS:
INF-MOUT-4814 INF-MOUT-5814
REFERENCES:
1. BUST Handbook
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17760 MOUT Assault Course (MAC)
Facility Code 17962 MOUT Collective Training Facility (Small)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The "snap" VCP is the simplest form of VCP and can be initiated by any
7-38
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 2, 3, 6
EVENT COMPONENTS:
1. Search individuals/vehicles according to unit Standard Operating Procedure
(SOP), higher headquarters order, and applicable Rules of Engagement
(ROEs).
2. The security team maintains observation, clear fields of fire, and sets
the appropriate distance from individuals/vehicles being searched IAW SOP.
3. When conducting a search, search teams maintain sufficient distance from
waiting individuals/vehicles.
4. Rotate search element members and security element members periodically,
to minimize complacency.
5. Maintain communications with higher headquarters.
RELATED EVENTS:
INF-MOUT-4813 INF-MOUT-5814 INF-MOUT-5803
REFERENCES:
1. BUST Handbook
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1, 2, 3, 4, 6
7-39
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Receive an order requiring possible employment of multiple sniper teams.
2. Coordinate inserts/extracts.
3. Coordinate communication plans.
4. Issue order.
5. Coordinate contingency plans.
6. Develop courses of action and schemes of maneuver for teams considering
capabilities and limitations of snipers.
7. Coordinate fire support.
8. Coordinate with other agencies/units as needed.
9. Reaffirm Rules of Engagement (ROE)/policy in AO.
10. Conduct BAMCIS throughout steps.
RELATED EVENTS:
INF-0317-3901 INF-0317-3902 INF-OPS-6620
INF-0317-4902 INF-0317-4903 INF-0317-3903
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. MCWP 3-15.3 Scout Sniping
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Analyze mission.
2. Consider capabilities/limitations of weapons, equipment, and teams.
3. Consider techniques of fire.
4. Consider sniper employment options for nature of operation.
5. Analyze target priorities.
6. Consider levels and type of support and coordination.
7. Implement appropriate training if needed.
RELATED EVENTS:
INF-0317-4901 INF-0317-3902 INF-OPS-6620
INF-0317-4903
7-40
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 3-05.222 U.S. Army Special Forces Sniper Training and Employment
2. FMFM 6-3 Marine Infantry Battalion
3. MCWP 3-15.3 Scout Sniping
SUPPORTED MET(S): 1, 2, 3, 4, 6
EVENT COMPONENTS:
1. Establish SARC location.
2. Set up SARC in organized, efficient process.
3. Maintain effective communications with sniper teams.
4. Post correct information on status boards and charts.
5. Brief information updates as needed.
6. Maintain communication/log and journals.
7. Advise, process, report/relay, and disseminate information from and to
sniper teams.
8. Coordinate between sniper teams and affected units.
9. Debrief teams.
RELATED EVENTS:
INF-0317-4901 INF-OPS-6620 INF-0317-4902
REFERENCES:
1. FM 3-05.222 U.S. Army Special Forces Sniper Training and Employment
2. MCRP 3-40.3B Radio Operators Handbook
3. MCWP 2-1 Intelligence Operations
4. MCWP 3-15.3 Scout Sniping
7-41
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Set security.
2. Select type of position.
3. Entrench the position.
4. Establish communication.
5. Clear field of fire.
6. Prepare range cards.
7. Develop ingress and egress routes.
8. Camouflage positions.
9. Construct supplementary position.
10. Construct alternate position if applicable.
11. Perform continuing actions.
RELATED EVENTS:
0331-EMPL-2001 INF-0331-4100
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17582 Automated Multipurpose Machine Gun Range (MPMG)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Entrenching will encompass the actual gun position and the ammo-man
position.
2. The supporting range needs to be developed to support range card
development with TRPs, FPLs, primary and alternate positions, etc.
SUPPORTED MET(S): 1
7-42
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Emplace machinegun team.
2. Engage targets according to the scheme of maneuver.
3. Control fires as directed.
4. Displace according to the scheme of maneuver.
5. Prepare for follow on missions.
RELATED EVENTS:
INF-0331-4102 0331-MMG-1002 0331-EMPL-1003
0331-MMG-1004 0331-MMG-1005 INF-0331-4100
0331-MMG-1007 0331-MMG-1013 0331-MMG-1014
0331-EMPL-2004 0331-MMG-1006
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 2
7-43
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Emplace machinegun team.
2. Engage targets according to the scheme of maneuver.
3. Control fires as directed.
4. Displace according to the scheme of maneuver.
5. Prepare for follow on missions.
RELATED EVENTS:
0331-EMPL-1001 0331-EMPL-2008 0331-EMPL-1003
0331-MMG-1004 0331-MMG-1005 0331-MMG-1006
0331-EMPL-1006 0331-EMPL-1007 0331-MMG-1007
0331-MMG-1013 0331-MMG-1014 INF-0331-3100
INF-0331-4100 INF-0331-4103 0331-EMPL-2001
0331-EMPL-2004 0331-EMPL-2007 0331-EMPL-1002
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 6
EVENT COMPONENTS:
1. Emplace machinegun team.
2. Engage targets according to the scheme of maneuver.
3. Control fires as directed.
4. Displace according to the scheme of maneuver.
5. Prepare for follow on missions.
7-44
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
0331-MMG-1002 INF-0331-4104 0331-EMPL-1002
0331-EMPL-1003 0331-MMG-1003 0331-MMG-1004
0331-MMG-1005 0331-MMG-1006 0331-EMPL-1006
0331-EMPL-1007 0331-MMG-1007 0331-MMG-1013
0331-MMG-1014 0331-EMPL-2001 0331-EMPL-2004
0331-EMPL-2007 0331-EMPL-2008 0331-EMPL-2009
INF-0331-3100 INF-0331-4100 0331-EMPL-1001
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 3
EVENT COMPONENTS:
1. Emplace machinegun team.
2. Engage targets according to the scheme of maneuver.
3. Control fires as directed.
4. Displace according to the scheme of maneuver.
5. Prepare for follow on missions.
RELATED EVENTS:
0331-EMPL-1001 INF-0331-4105 0331-EMPL-1003
0331-MMG-1004 0331-MMG-1005 0331-MMG-1006
0331-EMPL-1006 0331-EMPL-1007 0331-MMG-1007
0331-MMG-1013 0331-MMG-1014 0331-EMPL-2001
0331-EMPL-2004 0331-EMPL-2007 0331-EMPL-2008
0331-EMPL-2009 INF-0331-3100 INF-0331-4100
0331-EMPL-1002
7-45
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Emplace an assault team.
2. Engage targets according to the scheme of maneuver.
3. Control fires as directed.
4. Displace according to the scheme of maneuver.
5. Prepare for follow on missions.
RELATED EVENTS:
0351-SMAW-1002 0351-SMAW-1003 0351-SMAW-1004
0351-SMAW-1005 INF-0351-4101 0351-SMAW-1007
0351-SMAW-1010 0351-SMAW-2103 INF-0351-4100
0351-SMAW-1006
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17640 Antiarmor Tracking And Live-Fire Range
7-46
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Determine breaching technique.
2. Emplace an assault team.
3. Coordinate with supported and supporting units.
4. Breach obstacles according to the scheme of maneuver.
5. Conduct demolitions as directed.
6. Displace according to the scheme of maneuver.
7. Prepare for follow on missions.
RELATED EVENTS:
0351-DEMO-1201 INF-MAN-4102 0351-DEMO-1203
0351-DEMO-1204 0351-DEMO-1205 0351-DEMO-1210
0351-DEMO-1211 0351-DEMO-1213 0351-APOB-2103
0351-APOB-2104 0351-APOB-2105 0351-APOB-2106
0351-APOB-2107 0351-APOB-2108 0351-DEMO-2212
INF-0351-4100 INF-0351-4101 0351-DEMO-1202
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. FM 5-34 Engineer Field Data - Field Expedient Charges
3. TM 013750-13&P Operators Manual MK-7 MOD. 1 Anti-Personnel Obstacle
Breaching System (APOBS)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
7-47
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 2
EVENT COMPONENTS:
1. Emplace an assault team.
2. Coordinate with adjacent, supported, and supporting units.
3. Engage targets according to the scheme of maneuver.
4. Control fires as directed.
5. Displace according to the scheme of maneuver.
6. Prepare for follow on missions.
RELATED EVENTS:
0351-SMAW-1002 0351-SMAW-1003 0351-SMAW-1006
0351-SMAW-1007 INF-0351-4102 0351-SMAW-1301
0351-SMAW-2103 INF-0351-4100 0351-SMAW-1010
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17640 Antiarmor Tracking And Live-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
7-48
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 2
EVENT COMPONENTS:
1. Emplace an assault team.
2. Coordinate with supported and supporting units.
3. Conduct demolitions as directed.
4. Displace according to the scheme of maneuver.
5. Prepare for follow on missions.
RELATED EVENTS:
0351-DEMO-1211 0351-DEMO-1212 0351-DEMO-1214
INF-0351-4102 0351-DEMO-2212 INF-0351-4100
0351-DEMO-2203
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. FM 5-34 Engineer Field Data - Field Expedient Charges
3. TM 013750-13&P Operators Manual MK-7 MOD. 1 Anti-Personnel Obstacle
Breaching System (APOBS)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 6
7-49
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Emplace an assault team.
2. Coordinate with supported and supporting units.
3. Breach obstacles as directed.
4. Conduct demolitions as directed.
5. Displace according to the scheme of maneuver.
6. Prepare for follow on missions.
RELATED EVENTS:
0351-DEMO-1210 0351-DEMO-1211 0351-DEMO-1212
INF-0351-4103 0351-DEMO-2212 INF-0351-4100
0351-DEMO-2203
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 1, 2, 3, 6
7-50
NAVMC 3500.44
16 Sep 08
EVENT COMPONENTS:
1. Set security.
2. Select type of position.
3. Entrench the position.
4. Establish communication.
5. Clear field of fire.
6. Prepare range card.
7. Develop ingress and egress routes.
8. Camouflage positions.
9. Construct supplementary position.
10. Construct alternate position if applicable.
11. Perform continuing actions.
RELATED EVENTS:
INF-0352-4100
REFERENCES:
1. FM 3-22.34 TOW Weapon System
2. FM 3-22.37 Javelin Medium Anti-armor Weapon System
3. TM 09397B-12/1 Operator and Organizational Maintenance Manual for Javelin
4. TM 9-1425-450-12 TOW Weapon System Guided Missile System
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17420 Maneuver/Training Area, Heavy Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. M220E4 TOW weapon system.
2. M41A SABRE system.
3. M98A1 Javelin medium anti-armor weapon.
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Emplace anti-armor team.
2. Engage targets according to the scheme of maneuver.
3. Control fires as directed.
7-51
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
0352-MAW-1002 0352-MAW-1003 0352-HAW-1102
0352-EMPL-1302 0352-EMPL-1301 0352-EMPL-2302
0352-EMPL-2303 0352-HAW-1103
REFERENCES:
1. MCWP 3-15.5 Anti-armor Operations
2. TM 09397B-12/1 Operator and Organizational Maintenance Manual for Javelin
3. TM 9-1425-450-12 TOW Weapon System Guided Missile System
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be accomplished to standard utilizing simulation.
SUPPORTED MET(S): 1, 2, 6
CONDITION: Given a mortar section and a mission order that requires them to
displace.
EVENT COMPONENTS:
1. FDC issues the command to displace.
2. At least one (1) mortar unit remains fire capable, while the others
dismount. Also one (1) FDC member will travel with advance party unit.
3. FDC maintains positive communication with CFF net.
4. Once dismounted unit becomes fire capable once again, the remaining
unit(s) displace and link up with section at new desired location.
5. They continue to receive and execute missions within range and
capabilities.
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
7-52
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1, 2, 6
EVENT COMPONENTS:
1. Personnel don and clear protective masks (rubber hoods are not used with
the JSLIST or SARATOGA suit, which have hoods integrated on the jacket).
2. If mounted, personnel seek overhead cover within the vehicle, close all
vehicle hatches, or use a poncho to protect against further contamination.
3. All personnel conduct immediate decontamination of exposed skin, within
one (1) minute of exposure.
4. All personnel go to MOPP 4 within eight (8) minutes (chemical and
biological only - for nuclear attack take appropriate protective
measures).
5. Personnel administer first aid as required.
6. All personnel perform immediate decontamination of personal
weapons/equipment, using the M291/M100 decontamination kit within 15
minutes.
7. All personnel conduct immediate decontamination (operator wipe down) of
crew served weapons using the M100 Sorbent Decon System within an
additional ten minutes.
8. Designated personnel begin monitoring with monitoring equipment.
9. Unit re-establishes the chain of command and communications and reports
the situation to higher headquarters.
10. An initial NBC-1 (CHEM) report is submitted.
RELATED EVENTS:
0311-CBRN-1002 0300-CBRN-1003 0300-CBRN-1004
INF-CBRN-6504 0300-CBRN-1006 INF-CBRN-6501
INF-CBRN-6502 0300-CBRN-1005
REFERENCES:
1. FM 3-11.4 Multiservice tactics, techniques, and procedures for nuclear,
biological, and chemical (NBC) protection
2. MCRP 3-37A NBC Field Handbook
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17230 Gas Chamber
7-53
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This drill can be initiated by the evaluator giving the alert, "Gas,"
"Spray'" or "Fallout'" or by throwing a tactical CS, riot control, or white
(HC) hand grenade.
SUPPORTED MET(S): 1, 2, 6
CONDITION: Given personnel and equipment that have been exposed to CBRN
materials.
EVENT COMPONENTS:
1. Personnel decontaminate skin, individual weapons, and equipment using
appropriate decontamination kit (M291 or M100).
2. Extent of decontamination is determined and decontamination priorities are
established.
3. Contaminated protective covers are removed, decontaminated, or discarded.
4. Decontamination procedures are appropriate to items being decontaminated.
5. Personnel conduct MOPP gear exchange.
6. Equipment and vehicles are decontaminated using appropriate expedient
devices (M17MCHF LDS).
7. Adequacy of decontamination is determined.
8. If decontamination is inadequate, repeat procedures, request additional
decontamination support, or risk using equipment as is due to tactical
constraints.
9. Contaminated materials are discarded according to the tactical Standard
Operating Procedure (SOP), marked as contaminated, and their location is
provided to higher headquarters.
10. Actions are taken to control the spread of contamination.
RELATED EVENTS:
0300-CBRN-1004 0300-CBRN-1005 INF-CBRN-6504
INF-CBRN-6502 INF-CBRN-3502
REFERENCES:
1. MCWP 3-37.3 NBC Decontamination (FM 3-5)
SUPPORT REQUIREMENTS:
7-54
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17932 Decontamination Training Site
Facility Code 17410 Maneuver/Training Area, Light Forces
MATERIAL:
1. MOPP suits/NBC equipment
2. Maneuver/Training area
3. M100 Sorbent Decon System
4. M291 skin decon kit
5. M8 chemical detection paper
6. Chemical Agent Monitor (CAM)
7. M17MCHF LDS
8. NATO marking set
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct a mechanical breach.
2. Conduct a ballistic breach.
3. Conduct an explosive breach.
RELATED EVENTS:
INF-MAN-4102 0351-DEMO-1211 0351-DEMO-2212
0351-DEMO-2203 0351-DEMO-1212
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCWP 3-11.2 Marine Rifle Squad
3. MCWP 3-17.3 MAGTF Breaching Operations
4. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
5. TM 9-1375-213-12 Demolition Materials
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17830 Light Demolition Range
EQUIPMENT:
1. Mechanical breaching kit (grappling hook, sledge hammer, halligan tool,
etc.).
7-55
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Move in assigned formation.
2. Move as a base unit.
3. Maintain contact with the base unit.
4. Comply with tactical control measures.
5. Provide security in assigned sectors.
6. Execute immediate actions.
RELATED EVENTS:
INF-MAN-4109
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
2. MCWP 3-11.3 Scouting and Patrolling
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
SUPPORTED MET(S): 1
EVENT COMPONENTS:
1. Conduct fire and movement.
2. Move as a base unit, when designated.
3. Maintain contact with base unit.
4. Consolidate at the limit of advance.
5. Collect casualties.
6. Redistribute ammunition.
7. Handle detainees.
RELATED EVENTS:
INF-MAN-4101 INF-MAN-4105 INF-MAN-4106
7-56
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
Facility Code 17730 Fire And Movement Range
Facility Code 17936 Close Air Support Range
SUPPORTED MET(S): 2
EVENT COMPONENTS:
1. Prepare defensive positions.
2. Defend in sector.
3. Emplace obstacles.
4. Establish local security.
5. Occupy a listening/observation post.
6. Comply with tactical control measures.
7. Comply with engagement/disengagement criteria.
RELATED EVENTS:
INF-MAN-4132
REFERENCES:
1. MCRP 3-11.1A Commander's Tactical Handbook
2. MCWP 3-11.2 Marine Rifle Squad
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
7-57
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Small arms to build range cards, assuming 4 TRPs, 1 FPL or PDF.
2. All environments applicable (i.e., urban).
SUPPORTED MET(S): 1, 2, 6
EVENT COMPONENTS:
1. Clear: the kill zone of friendly troops and assets.
2. Check: the immediate surroundings for secondary devices (5/25m checks,
rolling stops if applicable) and ensure all members of the element are
aware of the possible IED.
3. Confirm: attempt to determine if the suspicious item/location is an IED or
battlefield clutter. Use optics, multiple angles, and any available
assets (e.g. MARCBOT or dogs) to assist as the situation allows.
4. Call: report possible IED to higher; ensure internal and adjacent elements
are aware of the possible IED.
5. Cordon and Control: secure the kill zone. Establish friendly disposition
that supports non-kinetic solutions for the cordon. Prevent friendly
troops (including all organic to the element that found the possible
device) and civilians from entering the kill zone until relieved.
6. Employ CREW in order to provide coverage for dismounted troops and ensure
all vehicles without CREW are covered.
7. Question and search local civilians, and search the area, for suspected
enemy personnel as permitted by the situation and IAW unit SOP.
RELATED EVENTS:
0300-PAT-1011 0300-PAT-1012
REFERENCES:
1. JIEDDTF 05-23 Joint Improvised Explosive Device Defeat Organization
Tactics, Techniques and Procedures Handbook
2. MCIP 3-17.01 IED Defeat
3. BUST Handbook
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
7-58
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task can be trained to standard through the use of the Recognition
of Combatants - Improvised Explosive Device (ROC-IED) simulator, Virtual
Battlefield System 1 (VBS1), and Close Combat Marine (CCM).
INF-MOBL-3152: Defend against mines and booby traps during motorized movement
(B)
SUPPORTED MET(S): 1, 2, 6
CONDITION: The unit has been directed to conduct a motorized movement. The
route has not been cleared. Enemy patrols are known to be operating in the
area
EVENT COMPONENTS:
1. Conduct hardening of vehicles prior to movement.
2. Brief all personnel on the potential of mines and booby traps and the
appropriate reaction.
3. Obtain updated intelligence on mines and booby traps in the area, status
on road clearance to include the status on alternate routes, and any other
information on the enemy's mine and booby trap activity.
4. Unit leader arranges for engineer support to sweep the road for mines.
5. During movement, personnel are engaged to watch for mines and booby traps.
6. Unit leader ensures personnel wear body armor.
7. Report encountered mines and mark or appropriately neutralize them.
RELATED EVENTS:
0300-MOBL-2001 0300-PAT-1010 INF-MOBL-5150
REFERENCES:
1. FM 20-32 Mine/Countermine Operations
2. MCWP 3-11.2 Marine Rifle Squad
3. MCWP 3-11.3 Scouting and Patrolling
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17502 Non-Standard Small Arms Range
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17610 Grenade Launcher Range
Facility Code 17730 Fire And Movement Range
7-59
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 6
CONDITION: Given an individual weapon and a second story access point into a
building, while wearing fighting loads.
EVENT COMPONENTS:
1. The Automatic Rifleman provides security for the Fire Team.
2. The Team Leader and Assistant Automatic Rifleman assist the Rifleman up to
the next level, either supported or unsupported.
3. The Team Leader and Assistant Automatic Rifleman face each other holding
an item, which will support the weight of the Rifleman, or with hands
cupped together.
4. The Rifleman steps onto the support or into the hands of the Team Leader
and Assistant Automatic Rifleman.
5. The Team Leader and Assistant Automatic Rifleman will lift the Rifleman up
to the entry point.
6. The Rifleman pulls himself into the entry point and prepares to assist the
next Marine in from the top.
7. The Team leader will stand with his back or side to the wall, with his
hands cupped together.
8. The Assistant Automatic Rifleman raises 1 foot up into the hands of the
Team Leader.
9. The Team Leader will lift the Assistant Automatic Rifleman up to the entry
point.
10. The Rifleman pulls the Assistant Automatic Rifleman into the entry point
by his weapon, hand, or other item he can find.
11. The Rifleman and the Assistant Automatic Rifleman will pull the Team
Leader up into the entry point by his weapon, hand, or other items they
can find.
12. The Team Leader will provide security while the Rifleman and the Assistant
Automatic Rifleman pull the Automatic Rifleman into the entry point by his
weapon, hand or other items they can find.
RELATED EVENTS:
0311-MOUT-1003 INF-MOUT-4810 INF-MOUT-4808
REFERENCES:
1. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
2. BUST Handbook
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17760 MOUT Assault Course (MAC)
Facility Code 17962 MOUT Collective Training Facility (Small)
Facility Code 17963 MOUT Collective Training Facility (Large)
7-60
NAVMC 3500.44
16 Sep 08
SUPPORTED MET(S): 1, 2, 3, 6
CONDITION: Given a ghillie suit, camouflage items, drag bag, sniper rifle,
optics, required ammunition, partner, and a mission.
EVENT COMPONENTS:
1. Conduct map reconnaissance.
2. Continuously camouflage self, weapons, and equipment.
3. Use reference points/terrain features to stay oriented.
4. Utilize patrolling techniques.
5. Move (navigate) to within designated range of targets/objectives using
proper movement techniques of crawls, walks, and turns.
6. Divide route into bounds/shorter legs while enroute.
7. Conduct SLLS - Stop, Look, Listen, Smell - as needed.
8. Select/Confirm a final firing position.
9. Withdraw from FFP.
10. Conduct debrief.
RELATED EVENTS:
0317-TACT-1003 INF-0317-4902 INF-0317-4901
INF-0317-3903
REFERENCES:
1. FM 3-05.222 U.S. Army Special Forces Sniper Training and Employment
2. FM 5-20 Camouflage
3. MCWP 3-11.3 Scouting and Patrolling
4. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
AA11 Cartridge, 7.62mm Long Range M118 LR 2
A112 Cartridge, 7.62mm Blank M82 2
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
7-61
NAVMC 3500.44
16 Sep 08
2. Sniper unknown distance live fire range (1,000 yards, 7.62 SB batwing
SDZ and steel targets), used for live fire after personnel have been
cleared from objective.
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Conducted in 2 or 4 man teams.
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. Handle the weapon safely.
2. Assume a firing position.
3. Estimate ballistics and weather to achieve hits on target and apply to
scope turrets.
4. Engage targets on correct command via radio.
5. Assess the situation.
6. Make entries into databook/gun log.
RELATED EVENTS:
INF-0317-4901 INF-0317-3901
REFERENCES:
1. FM 3-05.222 U.S. Army Special Forces Sniper Training and Employment
2. MCWP 3-15.3 Scout Sniping
3. TM 05539D-10/1 M40A3 Sniper Rifle
4. TM 09629A-23&P/2A SASR, 50 CALIBER M82A1A
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A606 Cartridge, Caliber .50 API MK211 Mod 10
AA11 Cartridge, 7.62mm Long Range M118 LR 20
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
7-62
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Sniper controller or designated person gives commands to fire.
Standard command sequence is "Stand by, I have control, 5, 4, 3, 2, 1"
(snipers fire on 2).
SUPPORTED MET(S): 1, 2, 3, 6
EVENT COMPONENTS:
1. React to chance contact.
2. React to ambushes.
3. React to indirect fires.
4. React to enemy air.
5. React to various danger areas/obstacles/minefields.
6. React to enemy sniper fire.
7. React to contact on departure/re-entry or friendly lines.
8. React to contact during link up.
9. React to contact in/around FFP/hide site.
10. Move as a unit.
11. Move by bounds from cover to cover.
12. Submit reports as required.
13. Request extract/reaction force/CASEVAC as required.
RELATED EVENTS:
0317-TACT-1003 INF-0317-4901 INF-0317-3901
REFERENCES:
1. FM 3-05.222 U.S. Army Special Forces Sniper Training and Employment
2. MCWP 3-11.3 Scouting and Patrolling
3. MCWP 3-15.3 Scout Sniping
4. SH 21-76 Ranger Handbook
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 15
A080 Cartridge, 5.56mm Blank M200 Single 15
RANGE/TRAINING AREA:
Facility Code 17760 MOUT Assault Course (MAC)
Facility Code 17560 Sniper Field-Fire Range
Facility Code 17962 MOUT Collective Training Facility (Small)
7-63
NAVMC 3500.44
16 Sep 08
7-64
NAVMC 3500.44
16 Sep 08
CHAPTER 8
PARAGRAPH PAGE
8-1
NAVMC 3500.44
16 Sep 08
CHAPTER 8
8000. PURPOSE. This chapter details the individual events that pertain to
the community. These events are linked to a service-level Mission Essential
Tasks (MET). This linkage tailor’s individual training for the selected MET.
Each individual event provides an event title, along with the conditions
events will be performed under, and the standard to which the event must be
performed to be successful.
8001. ADMINISTRATIVE NOTES. T&R events are coded for ease of reference.
Each event has a 4-4-4 digit identifier. The first four digits represent the
occupational field or military occupational field (0300). This chapter
contains Basic Infantryman individual training events. The second four
digits represent the functional or duty area. The last four digits represent
the level, and identifier number of the event. Every individual event has an
identifier number from 001 to 999.
8-2
NAVMC 3500.44
16 Sep 08
8-3
NAVMC 3500.44
16 Sep 08
8-4
NAVMC 3500.44
16 Sep 08
8-5
NAVMC 3500.44
16 Sep 08
8-6
NAVMC 3500.44
16 Sep 08
8-7
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0321, 0331, 0341, 0351, 0352,
0369
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 1STSGT, MSGT, SGTMAJ, MGYSGT,
WO-1, CWO-2, CWO-3, CWO-4, CWO-5, 2NDLT, 1STLT, CAPT, MAJ, LTCOL, COL
PERFORMANCE STEPS:
1. Disassemble the mask.
2. Inspect for cleanliness and serviceability.
3. Clean the mask.
4. Reassemble the mask.
5. Perform a function check.
REFERENCES:
1. TM 3-4240-339-10 Operator's Manual for Chemical-Biological Mask, M40
SUPPORT REQUIREMENTS:
EQUIPMENT:
1. M40 field protective mask
2. Cleaning supplies
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0321, 0331, 0341, 0351, 0352,
0369
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 1STSGT, MSGT, SGTMAJ, MGYSGT,
WO-1, CWO-2, CWO-3, CWO-4, CWO-5, 2NDLT, 1STLT, CAPT, MAJ, LTCOL, COL
8-8
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Attach the canteen to the mask drinking tube.
2. Drink from the canteen.
3. Detach the canteen.
RELATED EVENTS:
0311-CBRN-1002
REFERENCES:
1. TM 3-4240-339-10 Operator's Manual for Chemical-Biological Mask, M40
SUPPORT REQUIREMENTS:
EQUIPMENT:
1. MOPP suits/NBC equipment
2. M40 field protective mask
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0321, 0331, 0341, 0351, 0352,
0369
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 1STSGT, MSGT, SGTMAJ, MGYSGT,
WO-1, CWO-2, CWO-3, CWO-4, CWO-5, 2NDLT, 1STLT, CAPT, MAJ, LTCOL, COL
PERFORMANCE STEPS:
1. Decontaminate gear.
2. Prepare for decontamination.
3. Decontaminate mask and remove hood.
4. Remove overgarment and overboots.
5. Remove gloves.
6. Put on new overgarment.
7. Put on new overboots and gloves.
8. Secure hood.
9. Secure gear.
RELATED EVENTS:
0311-CBRN-1002
REFERENCES:
1. MCWP 3-37.3 NBC Decontamination (FM 3-5)
SUPPORT REQUIREMENTS:
8-9
NAVMC 3500.44
16 Sep 08
EQUIPMENT:
1. M40 Field Protective Mask
2. MOPP gear
3. M291 Skin Decon Kit
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0321, 0331, 0341, 0351, 0352,
0369
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 1STSGT, MSGT, SGTMAJ, MGYSGT,
WO-1, CWO-2, CWO-3, CWO-4, CWO-5, 2NDLT, 1STLT, CAPT, MAJ, LTCOL, COL
CONDITION: Given an M291 Skin Decontamination Kit (SDK), and an M40 field
protective mask with carrier, while wearing a fighting load.
PERFORMANCE STEPS:
1. Don and clear an M40 field protective mask.
2. Seek overhead cover or use a poncho for protection against further
contamination.
3. Remove 1 M291 SDK packet from the carrying pouch.
4. Tear the M291 SDK packet open at the notch. Remove applicator pad, and
discard empty packet.
5. Unfold the M291 SDK applicator pad and slip finger(s) into the handle.
6. Thoroughly scrub exposed skin on one hand until completely covered with
black powder from the M291 SDK applicator pad.
7. Switch the applicator pad to the other hand and repeat step 6. Do not
discard the pad when finished.
8. If unmasked when contaminated, stop breathing. Remove mask, and thoroughly
scrub exposed skin of face until completely covered with black powder,
using the same M291 SDK applicator pad that was used on the hands.
9. Use a second M291 SDK applicator pad to thoroughly scrub exposed skin of
the neck and ears until completely covered with black powder.
10. If masked without the hood secured tight when contaminated, thoroughly
scrub exposed skin of the neck and ears until completely covered with
black powder, using the same M291 SDK applicator pad that was used on the
hands.
11. Redo hands until completely covered with black powder.
12. Put on protective gloves.
13. Secure hood.
14. Use the M291 SDK to remove liquid contamination from the exterior of the
individual weapon.
15. Use the M291 SDK to decontaminate the magazine, feed-tray, shoulder stock,
and trigger assembly, as appropriate.
16. Decontaminate the protective gloves using the M291 SDK.
17. Remove powder from the M291 SDK with soap and water when operational
conditions permit.
18. Bury the used applicator pads and packets, if circumstances permit.
8-10
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
0300-CBRN-1006 0311-CBRN-1002
REFERENCES:
1. MCRP 4-11.1A MTTP for Treatment of Chemical Agent Casualties and
Conventional Military Chemical Injuries
2. MCWP 3-37.3 NBC Decontamination (FM 3-5)
SUPPORT REQUIREMENTS:
EQUIPMENT:
1. MOPP suits/NBC equipment
2. M40 field protective mask
3. M291 Skin Decon Kit
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0321, 0331, 0341, 0351, 0352,
0369
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 1STSGT, MSGT, SGTMAJ, MGYSGT,
WO-1, CWO-2, CWO-3, CWO-4, CWO-5, 2NDLT, 1STLT, CAPT, MAJ, LTCOL, COL
CONDITION: Given a MARK I nerve agent antidote, MOPP gear and an M40 field
protective mask with carrier, while wearing a fighting load.
PERFORMANCE STEPS:
1. Don and clear an M40 field protective mask.
2. Identify the nerve agent.
3. Perform auto injection.
4. Upgrade to MOPP Level 4.
5. Seek medical attention.
RELATED EVENTS:
0300-CBRN-1005
REFERENCES:
1. MCRP 4-11.1A MTTP for Treatment of Chemical Agent Casualties and
Conventional Military Chemical Injuries
SUPPORT REQUIREMENTS:
EQUIPMENT:
1. M40 Field Protective Mask
2. MOPP gear
3. MARK I Nerve Agent Antidote Kit (NAAK)
8-11
NAVMC 3500.44
16 Sep 08
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, WO-1, CWO-2, CWO-3, 2NDLT,
1STLT, CAPT
PERFORMANCE STEPS:
1. Establish security.
2. Conduct a hasty search of the area of observation.
3. Prioritize likely areas of threat.
4. Establish a baseline.
5. Detect anomalies.
6. Report threats to higher headquarters.
RELATED EVENTS:
0300-CMBH-1002
REFERENCES:
1. MCWP 3-11.3 Scouting and Patrolling
2. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, WO-1, CWO-2, CWO-3, 2NDLT,
1STLT, CAPT
PERFORMANCE STEPS:
1. Establish security.
8-12
NAVMC 3500.44
16 Sep 08
PREREQUISITE EVENTS:
0300-OPTS-1001 0300-CMBH-1001
REFERENCES:
1. MCWP 3-11.3 Scouting and Patrolling
2. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
EQUIPMENT:
1. AN/PAS-22
2. AN/PVQ-31A/31B (RCO)
3. AN/PAS-13
4. AN/PVS-7/14
5. AN/PVS-17B/C
6. Binoculars
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task can be trained using any day/night observation device, or a
combination of devices.
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, WO-1, CWO-2, CWO-3, 2NDLT,
1STLT, CAPT
PERFORMANCE STEPS:
1. Establish security.
2. Observe an area.
3. Establish a baseline.
8-13
NAVMC 3500.44
16 Sep 08
4. Detect anomalies.
5. Determine if the anomaly is a threat.
RELATED EVENTS:
0300-CMBH-1002 0300-CMBH-1001
REFERENCES:
1. MCWP 3-11.3 Scouting and Patrolling
2. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, WO-1, CWO-2, CWO-3, 2NDLT,
1STLT, CAPT
CONDITION: Given a mission and an area that contains tracks, while wearing a
fighting load.
PERFORMANCE STEPS:
1. Identify a track is present.
2. Safeguard sign by ensuring area does not get contaminated.
3. Identify the dynamics of a sign.
4. Determine significance of sign.
5. Inspect area for other sign action indicators.
6. Report information to higher headquarters.
RELATED EVENTS:
0300-CMBH-1001 0300-CMBH-1003 0300-CMBH-1002
REFERENCES:
1. MCWP 3-11.3 Scouting and Patrolling
2. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
8-14
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
PERFORMANCE STEPS:
1. Execute the hand-and-arm signal for decrease speed.
2. Execute the hand-and-arm signal for changing direction or column (right or
left).
3. Execute the hand-and-arm signal for enemy in sight.
4. Execute the hand-and-arm signal for range.
5. Execute the hand-and-arm signal for commence firing.
6. Execute the hand-and-arm signal for fire faster.
7. Execute the hand-and-arm signal for fire slower.
8. Execute the hand-and-arm signal for cease fire.
9. Execute the hand-and-arm signal for assemble.
10. Execute the hand-and-arm signal for form column.
11. Execute the hand-and-arm signal for are you ready/I am ready.
12. Execute the hand-and-arm signal for attention.
13. Execute the hand-and-arm signal for shift.
14. Execute the hand-and-arm signal for echelon right/left.
15. Execute the hand-and-arm signal for skirmishers (fire team)/line formation
(squad).
16. Execute the hand-and-arm signal for wedge.
17. Execute the hand-and-arm signal for vee.
18. Execute the hand-and-arm signal for fire team.
19. Execute the hand-and-arm signal for squad.
20. Execute the hand-and-arm signal for platoon.
21. Execute the hand-and-arm signal for close up.
22. Execute the hand-and-arm signal for open up, extend.
23. Execute the hand-and-arm signal for disperse.
24. Execute the hand-and-arm signal for leaders join me.
25. Execute the hand-and-arm signal for I do not understand.
26. Execute the hand-and-arm signal for forward.
27. Execute the hand-and-arm signal for halt.
28. Execute the hand-and-arm signal for freeze.
29. Execute the hand-and-arm signal for dismount/down/take cover.
30. Execute the hand-and-arm signal for mount.
31. Execute the hand-and-arm signal for disregard previous command/as you
were.
32. Execute the hand-and-arm signal for left or right flank.
33. Execute the hand-and-arm signal for increase speed or double time.
34. Execute the hand-and-arm signal for hasty ambush right or left.
35. Execute the hand-and-arm signal for rally point.
36. Execute the hand-and-arm signal for objective rally point.
8-15
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, WO-1, CWO-2, 2NDLT, 1STLT, CAPT
CONDITION: Given a red lens flashlight, chemlight, night vision device with
infrared illuminator, infrared emitters, and infrared chemlights.
PERFORMANCE STEPS:
1. Employ tap signals.
2. Employ pull lines.
3. Employ red lens flashlight.
4. Employ directional chemlights.
5. Employ infrared emitters/chemlights.
6. Employ infrared night vision devices.
7. Employ thermal devices.
REFERENCES:
1. FM 21-60 Visual Signals
2. MCWP 3-11.2 Marine Rifle Squad
3. MCWP 3-11.3 Scouting and Patrolling
4. TM 09500A-10/1 Operator's Manual Night Vision Goggles AN/PVS-7B and
AN/PVS-7D
5. TM 10271A-10/1 Operator's Manual, Monocular NVD, AN/PVS-14
SUPPORT REQUIREMENTS:
EQUIPMENT:
1. Military flash light, red lens capable
2. Night vision devices
3. 550 cord
4. Infrared chemlights
5. Visual spectrum chemlights
6. Infrared emitters
8-16
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
8001
GRADES: PVT, PFC, LCPL, CPL, SGT, WO-1, CWO-2, 2NDLT, 1STLT
PERFORMANCE STEPS:
1. Inspect equipment for serviceability.
2. Connect two or more telephones with wire.
3. Perform a communications check.
4. Troubleshoot as required.
REFERENCES:
1. MCRP 6-22C RADIO OPERATOR'S HANDBOOK
2. TM 11-5805-243-13-40-34P Operator's Manual for the TA-1/PT
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT
PERFORMANCE STEPS:
1. Assemble the wireless system.
2. Troubleshoot as required.
3. Conduct a communications check.
REFERENCES:
1. MCRP 3-40-3_ Multi-Service Communications Procedures and Tactical Radio
Procedures in Joint Environment
8-17
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
CONDITION: Given a VHF radio with a fill, a frequency or net ID, and a
distant station, while wearing a fighting load.
PERFORMANCE STEPS:
1. Assemble a radio set.
2. Load a net ID.
3. Synchronize radios as required.
4. Check the time against GPS time.
5. Conduct a communications check.
6. Troubleshoot as required.
REFERENCES:
1. MCRP 3-40-3_ Multi-Service Communications Procedures and Tactical Radio
Procedures in Joint Environment
2. TM 11-5820-890-10-6 SINCGARS ICOM Ground Radios Pocket Guide
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Submit an enemy sighting report (SPOT)/(SALUTE).
2. Submit a position report (POSREP).
3. Submit a situation report (SITREP).
REFERENCES:
1. MCRP 2-25A Reconnaissance Reports Guide
2. MCWP 3-11.3 Scouting and Patrolling
8-18
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Complete a 20 kilometer march.
REFERENCES:
1. MCRP 3-02A Marine Physical Readiness Training for Combat
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
STANDARD: To ensure the hole is at least armpit deep, has a 3 feet thick/6
inch high parapet, and a grenade sump at a 30 degree angle and 5 inches in
diameter.
PERFORMANCE STEPS:
1. Emplace direction stakes.
2. Clear fields of fire from the position forward.
3. Trace an outline.
4. Emplace direction stakes.
5. Dig a skirmisher trench.
6. Dig a hole.
7. Construct a parapet.
8. Build a firing platform.
9. Dig a water sump.
10. Dig a circular grenade sump.
11. Camouflage the position.
REFERENCES:
1. FM 21-75 Combat Skills of the Soldier
SUPPORT REQUIREMENTS:
8-19
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
PERFORMANCE STEPS:
1. Challenge unidentified personnel.
2. Report information within the sector of fire as necessary.
3. Displace to alternate and supplementary position as ordered.
4. Perform individual continuing action.
5. Respond to fire commands.
6. Maintain surveillance to the front, flank, and rear.
RELATED EVENTS:
0300-DEF-1001
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-11.2 Marine Rifle Squad
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A075 Cartridge, 5.56mm Blank M200 Linked 20
A080 Cartridge, 5.56mm Blank M200 Single 5
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task can be trained to standard through the use of the Close
Combat: Marines (CCM) or Visual Battlefield System 1 (VBS1) simulators.
8-20
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, MSGT, 2NDLT, 1STLT, CAPT
CONDITION: Given an M69 practice grenade, fuzes, and targets at 20, 30, and
40 meters, while wearing a fighting load.
PERFORMANCE STEPS:
1. Engage a fighting position at 30 meters with 3 practice grenades, from the
kneeling position.
2. Engage a trench target at 40 meters with 3 practice grenades, from the
standing position.
3. Engage a mortar position at 30 meters with 3 practice grenades, from the
kneeling position.
4. Engage a troop in the open at 20 meters with 3 practice grenades, from the
alternate prone position.
REFERENCES:
1. FM 3-23.30 Grenades and Pyrotechnic Signals
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
G811 Grenade, Hand Practice Body M69 12
G878 Fuze, Hand Grenade Practice M228 12
RANGE/TRAINING AREA:
Facility Code 17810 Live Hand Grenade Range
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
8-21
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Remove grenade from pouch.
2. Inspect grenade for defects.
3. Estimate range to target.
4. Prepare the grenade for throwing.
5. Assume grenade throwing position.
6. Throw the grenade and communicate "Frag Out."
7. Take cover.
REFERENCES:
1. FM 3-23.30 Grenades and Pyrotechnic Signals
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
G811 Grenade, Hand Practice Body M69 3
G874 Fuze, Hand Grenade M201A1/M201A1-1 3
G881 Grenade, Hand Fragmentation M67 1
RANGE/TRAINING AREA:
Facility Code 17810 Live Hand Grenade Range
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
8001
GRADES: PVT, PFC, LCPL, CPL, SGT, WO-1, CWO-2, 2NDLT, 1STLT
CONDITION: Given an M18A1 Claymore mine and sector of fire, while wearing a
fighting load.
PERFORMANCE STEPS:
1. Inspect the claymore and components.
2. Test firing components.
3. Position the claymore to cover sector of fire.
8-22
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 23-23 Antipersonnel Mine M18A1 Claymore
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
K139 Mine, Antipersonnel Practice M68 wit 1
RANGE/TRAINING AREA:
Facility Code 17905 Mine Warfare Area
Facility Code 17830 Light Demolition Range
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369
PERFORMANCE STEPS:
1. Remove all non-essential equipment.
2. Sling rifle across back.
3. Assume a prone position.
4. Look for trip wires.
5. Feel for trip wires.
6. Mark and bypass trip wires if located.
7. Probe for solid objects.
8. Mark and bypass solid objects.
REFERENCES:
1. FM 20-32 Mine/Countermine Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17905 Mine Warfare Area
8-23
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Handle the weapon without violating the four safety rules.
2. Assemble a sling.
3. Don a sling.
4. Assume weapons transports.
5. Fill a magazine.
6. Place the weapon in Condition (3).
7. Place the weapon in Condition (1).
8. Reload the weapon.
9. Place the weapon in Condition (4).
10. Empty a magazine.
11. Perform unknown Condition transfer.
REFERENCES:
1. MCRP 3-01A Rifle Marksmanship
2. TM 05538/10012-10A/1 Operator's Manual for Rifle, M16A2, A4 Rifle/M4,
M4A1 Carbine (Nov 2004)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A060 Cartridge, 5.56mm Dummy M199 5
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
8-24
NAVMC 3500.44
16 Sep 08
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Place the weapon in Condition (4).
2. Disassemble the weapon.
3. Clean the weapon.
4. Lubricate the weapon.
5. Assemble the weapon.
6. Perform user serviceability inspection.
REFERENCES:
1. MCRP 3-01A Rifle Marksmanship
2. TM 05538/10012-10A/1 Operator's Manual for Rifle, M16A2, A4 Rifle/M4,
M4A1 Carbine (Nov 2004)
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Determine stoppage/malfunction.
2. Apply the appropriate corrective action procedure for the
stoppage/malfunction experienced.
3. Resume engagement.
REFERENCES:
1. MCRP 3-01A Rifle Marksmanship
2. TM 05538/10012-10A/1 Operator's Manual for Rifle, M16A2, A4 Rifle/M4,
M4A1 Carbine (Nov 2004)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A060 Cartridge, 5.56mm Dummy M199 5
8-25
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Set the weapons sights at initial sight setting for a true zero.
2. Don a sling.
3. Place weapon in Condition (1).
4. Establish a stable firing position.
5. Fire a shot group.
6. Identify the center of shot group.
7. Make required sight adjustments.
8. Fire a second shot group. (Repeat steps 4 thru 7)
9. Fire a third shot group to confirm.
10. Record zero.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 10
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Zeroing iterations will be done with a total of 10 rounds fired in
three groups of 3, 3, and 4 rounds.
2. Zeroing will be conducted during the Table 1 Tri-Fire Exercise, and
during the Table 2 BZO Exercise.
3. Entry level training will fire a grouping string of fire prior to
zeroing the weapon.
8-26
NAVMC 3500.44
16 Sep 08
4. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Assume a prone position.
2. Present weapon to target.
3. Acquire sight alignment and sight picture.
4. Engage target with single shot.
5. Follow through.
6. Maintain weapon in Condition (1).
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 30
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
8-27
NAVMC 3500.44
16 Sep 08
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Assume a sitting position.
2. Present weapon to target.
3. Acquire sight alignment and sight picture.
4. Engage target with single shot.
5. Follow through.
6. Maintain weapon in Condition (1).
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 20
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Assume a kneeling position.
2. Present weapon to target.
8-28
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 10
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Assume a standing position.
2. Present weapon to target.
3. Acquire sight alignment and sight picture.
4. Engage target with single shot.
5. Follow through.
6. Maintain weapon in Condition (1).
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
8-29
NAVMC 3500.44
16 Sep 08
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 20
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Assume a shooting position.
2. Detect target.
3. Acquire sight alignment and sight picture.
4. Engage target with single shot.
5. Follow through.
6. Immediately repeat steps 3-5 as needed.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 80
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
8-30
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Engage stationary targets from 200 yards from prescribed shooting
positions, while maintaining a data book.
2. Engage stationary targets from 300 yards from prescribed shooting
positions, while maintaining a data book.
3. Engage stationary targets from 500 yards from prescribed shooting
positions, while maintaining a data book.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 50
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
8-31
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Assemble a combat sling.
2. Don a combat sling.
3. Execute tactical carry.
4. Execute alert carry.
5. Execute ready carry.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Observe ejection port cover.
2. Index the magazine.
3. Withdraw a filled magazine from the furthest to reach magazine pouch.
4. Press the magazine release button.
5. Remove the partially filled magazine.
6. Insert the filled magazine.
7. Retain partially filled magazine.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
8-32
NAVMC 3500.44
16 Sep 08
ORDNANCE:
DODIC Quantity
A060 Cartridge, 5.56mm Dummy M199 5
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Observe ejection port cover.
2. Press the magazine release button allowing the magazine to drop free from
the weapon.
3. Withdraw a filled magazine from the easiest to reach magazine pouch.
4. Insert the filled magazine.
5. Depress the bolt catch.
6. Sight in.
7. Attempt to fire.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 6
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
8-33
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
STANDARD: To strike the target in accordance with the tables in MCO 3574.2K.
PERFORMANCE STEPS:
1. Assume a combat shooting position.
2. Present weapon to target.
3. Achieve sight picture.
4. Engage target with one shot.
5. Follow through.
6. Immediately re-acquire sight picture.
7. Engage target with one shot.
8. Follow through.
9. Search and assess.
10. Maintain weapon in Condition 1.
11. Execute Controlled Pairs from a static shooting position.
12. Execute Controlled Pairs while pivoting 90 degrees to the Right and Left.
13. Execute Controlled Pairs while pivoting 180 degrees.
14. Execute Controlled Pairs while moving forward.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 64
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
8-34
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
STANDARD: To strike the target in accordance with the tables in MCO 3574.2k.
PERFORMANCE STEPS:
1. Execute a pair to the chest.
2. Assess target.
3. Engage target at an alternate aiming point with a single shot.
4. Follow through.
5. Search and assess.
6. Maintain weapon in Condition 1.
7. Execute Failure to Stop Drills from a static shooting position.
8. Execute Failure to Stop Drills while pivoting 90 degrees to the Right and
Left.
9. Execute Failure to Stop Drills while pivoting 180 degrees.
10. Execute Failure to Stop Drills while moving forward.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 23
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
8-35
NAVMC 3500.44
16 Sep 08
STANDARD: To strike the target in accordance with the tables in MCO 3574.2k.
PERFORMANCE STEPS:
1. Detect targets.
2. Assume combat shooting position.
3. Prioritize targets.
4. Engage targets in order of threat level.
5. Search and assess.
6. Maintain weapon in Condition 1.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 24
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
2. Any of the following methods may be used to accomplish this task:
a. Execute multiple target engagements using Controlled Pairs.
b. Execute multiple target engagements using Hammer Pairs.
c. Execute multiple target engagements using Failure to Stop Drill.
d. Execute multiple target engagements while pivoting 90 degrees to
Right and Left.
e. Execute multiple target engagements while pivoting 180 degrees.
f. Execute multiple target engagements while moving forward.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
STANDARD: To strike the target in accordance with the tables in MCO 3574.2k.
8-36
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Detect targets.
2. Assume a combat shooting position.
3. Determine appropriate engagement technique.
4. Apply appropriate aiming process for time and distance.
5. Engage target(s).
6. Follow through.
7. Search and assess.
8. Maintain weapon in Condition (1).
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 12
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Execute combat marksmanship presentation drills (single shot, Hammer Pair,
Controlled Pair, and Failure to Stop Drill).
2. Engage targets with position changes.
3. Engage multiple targets.
4. Engage targets while conducting a speed load.
5. Engage moving targets.
8-37
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 220
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Mount the RCO to the service rifle/carbine.
2. Don a combat sling.
3. Place weapon in Condition (1).
4. Establish a stable firing position.
5. Fire a 3 round shot group.
6. Identify the center of shot group.
7. Make required sight adjustments.
8. Repeat steps 4 thru 6.
9. Fire a 4 round confirmation group.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 20
8-38
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Zeroing for the RCO is conducted at the 36 yard line and then confirmed
at the 100 yard line. Both zeroing iterations must be completed in order to
achieve this task.
2. Ten (10) rounds are used at the 36 yard zero to establish initial zero
settings. Ten (10) rounds are used at the 100 yard line to confirm initial
zero settings and to make any necessary adjustments to RCO sight settings.
3. The zeroing iterations will be fired in groups of 3, 3, and 4 rounds.
4. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Mount the target pointer illuminator/aiming light to the service
rifle/carbine.
2. Mark the designated strike zone on the zeroing target.
3. Set the adjusters to their zero preset position.
4. Turn the aiming beam on low power.
5. Install aiming side lens cap with the neutral density filter.
6. Look through the night vision device.
7. Activate the aiming beam.
8. Fire a 3-round shot group.
9. Identify the center of shot group.
10. Make required sight adjustments.
11. Continue steps 8 & 9 until 2 out of 3 rounds are in the designated strike
zone.
12. Adjust the illumination beam adjustment knobs until the illumination beam
is aligned with the aiming beam.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
8-39
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 10
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Use a Laser Boresight to zero the Target Pointer Illuminator/Aiming
Light to the service rifle prior to executing this task.
2. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
3. This task is applicable if equipment is on a unit's T/E.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
STANDARD: To strike the target in accordance with the tables in MCO 3574.2k.
PERFORMANCE STEPS:
1. Assume a combat shooting position.
2. Present weapon to target.
3. Achieve sight picture.
4. Fire two shots with a single sight picture.
5. Follow through.
6. Search and assess.
7. Maintain weapon in Condition 1.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 8
8-40
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
2. Any of the following methods may be used to accomplish this task:
a. Execute Hammer Pairs while pivoting 90 degrees to the Right and
Left.
b. Execute Hammer Pairs while pivoting 180 degrees.
c. Execute Hammer Pairs from a static shooting position.
d. Execute Hammer Pairs while moving forward.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
STANDARD: To strike the target in accordance with the tables in MCO 3574.2k.
PERFORMANCE STEPS:
1. Detect target.
2. Pivot towards target left/right.
3. Assume combat shooting position.
4. Present weapon to target.
5. Engage target (Hammer Pair, Controlled Pair, Failure to Stop Drill).
6. Follow through.
7. Search and assess.
8. Maintain weapon in Condition 1.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 14
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
8-41
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
STANDARD: To strike the target in accordance with the tables in MCO 3574.2k.
PERFORMANCE STEPS:
1. Move forward.
2. Detect targets.
3. Engage targets while moving forward (Controlled Pair, Hammer Pair, Failure
to Stop Drill).
4. Follow through.
5. Search and assess.
6. Maintain weapon in Condition 1.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 20
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
0300-M16-1024: Engage targets with the service rifle/carbine during night (B)
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
8-42
NAVMC 3500.44
16 Sep 08
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
STANDARD: To strike the target in accordance with the tables in MCO 3574.2K.
PERFORMANCE STEPS:
1. Detect targets.
2. Assume a combat shooting position.
3. Use 0-2 sight aperture.
4. Engage targets.
5. Follow through.
6. Search and assess.
7. Maintain weapon in condition 1.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B535 Cartridge, 40mm White Star Parachute .5
A059 Cartridge, 5.56mm Ball M855 10/Clip 50
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Any available illumination will be used when pyro is not authorized.
2. This task is not intended to be conducted under BMNT or EENT.
3. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
8-43
NAVMC 3500.44
16 Sep 08
STANDARD: To strike the target in accordance with the tables in MCO 3574.2k.
PERFORMANCE STEPS:
1. Don night vision device.
2. Assume a combat shooting position.
3. Detect targets.
4. Activate the target pointer illuminator.
5. Aim center mass on the target.
6. Engage target.
7. Search and assess.
8. Maintain weapon in condition 1.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
3. TM 10470A-12&P/1A Operator's and Unit Maintenance Manual, Target Pointer
Illuminator/Aiming Light, AN/PEQ-2A
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A063 Cartridge, 5.56mm Tracer M856 Single 12
A059 Cartridge, 5.56mm Ball M855 10/Clip 48
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
2. This task is applicable if equipment is on a unit's T/E.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, MSGT, MGYSGT, 2NDLT, 1STLT,
CAPT
PERFORMANCE STEPS:
1. Detect targets.
2. Assume combat shooting position.
8-44
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 40
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Execute presentation drills (controlled pairs, hammer pairs, and failure
to stop).
2. Execute right/left pivot drills.
3. Execute forward movement drills.
4. Execute pivot left/right into forward movement drills.
5. Engage unknown distance targets.
6. Engage targets at night.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
8-45
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 150
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
2. Use night vision devices and/or RCO if on unit's T/E, if not, use iron
sights.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, MSGT, MGYSGT, 2NDLT, 1STLT,
CAPT
PERFORMANCE STEPS:
1. Detect targets.
2. Move laterally.
3. Engage targets (Controlled Pairs, Hammer Pairs, box drills).
4. Follow through.
5. Continue to move laterally.
6. Search and assess.
7. Maintain weapon in Condition 1.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 56
MISCELLANEOUS:
8-46
NAVMC 3500.44
16 Sep 08
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, MSGT, MGYSGT, 2NDLT, 1STLT,
CAPT
PERFORMANCE STEPS:
1. Execute Head Shot Drills.
2. Execute Immediate Threat Drills.
3. Execute Strong Side Engagement Techniques.
4. Execute Weak Side Engagement Techniques.
5. Execute Multiple Target Engagement Techniques.
6. Execute Forward Movement Drills.
7. Execute Short Range Qualifications.
8. Execute Lateral Movement Drills.
9. Execute Unknown Distance Drills.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 244
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The intent of this task is for it to be accomplished while using an
RCO, if an RCO is not available to the shooter, iron sight may be used.
2. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
8-47
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Execute immediate Threat Drills.
2. Execute Pivot Drills.
3. Execute Forward Movement Drills.
4. Execute Head Shot Drills.
5. Execute Lateral Movement Multiple Target Drills.
6. Execute Short Range Qualification Drills.
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
2. MCRP 3-01A Rifle Marksmanship
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 171
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
8-48
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Clear the rifle.
2. Clear the M203 Grenade Launcher.
3. Disassemble the grenade launcher.
4. Clean the grenade launcher.
5. Inspect the grenade launcher.
6. Lubricate the grenade launcher.
7. Assemble the grenade launcher.
8. Conduct a function check.
REFERENCES:
1. TM 07700B-10 Operator's Manual, 40mm Grenade Launcher, M203 (Ch 1&2)
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
CONDITION: Given a service rifle with a mounted M203 grenade launcher that
fails to fire and ammunition, while wearing a fighting load.
PERFORMANCE STEPS:
1. Keep muzzle on target for 30 seconds.
2. Unload the round and catch it.
3. If the primer is dented, store the round a safe distance away from
serviceable ammunition.
4. If the primer is not dented, reload and attempt to fire.
5. If the weapon fails to fire, perform remedial action.
REFERENCES:
1. TM 07700B-10 Operator's Manual, 40mm Grenade Launcher, M203 (Ch 1&2)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B472 Cartridge, 40mm Dummy M922 1
RANGE/TRAINING AREA:
Facility Code 17610 Grenade Launcher Range
8-49
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Expenditure of ammunition is not required.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
CONDITION: Given a service rifle with a mounted M203 grenade launcher and
ammunition, while wearing a fighting load.
PERFORMANCE STEPS:
1. Clear the weapon.
2. Load the weapon.
3. Unload the weapon.
REFERENCES:
1. FM 3-22.31 40-mm Grenade Launcher, M203
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B472 Cartridge, 40mm Dummy M922 1
RANGE/TRAINING AREA:
Facility Code 17610 Grenade Launcher Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Expenditure of ammunition is not required.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
8-50
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Identify a target at 200 meters.
2. Set sights.
3. Engage a target from a supported prone position.
4. Adjust windage and elevation as needed.
5. Repeat steps 3 and 4 as necessary.
REFERENCES:
1. FM 3-22.31 40-mm Grenade Launcher, M203
2. MCIP 3-15.01 M16A4 Rifleman's Suite
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B546 Cartridge, 40mm HEDP M433 5
RANGE/TRAINING AREA:
Facility Code 17610 Grenade Launcher Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Must be fired on a range that supports dud producing munitions.
2. This event is designed for the leaf and quadrant sight.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
8-51
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Identify a target within 300 meters.
2. Set sights.
3. Fire from a supported position.
RELATED EVENTS:
0300-M203-1002 0300-M203-1004 0300-M203-1003
REFERENCES:
1. FM 3-22.31 40-mm Grenade Launcher, M203
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B546 Cartridge, 40mm HEDP M433 10
RANGE/TRAINING AREA:
Facility Code 17610 Grenade Launcher Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task may be trained to standard using training practice rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369
PERFORMANCE STEPS:
1. Engage a window at 90 to 100 meters and a bunker at 105 to 115 meters with
3 training practice rounds from the kneeling firing position within 2
minutes from station 2.
2. Engage a bunker at 135 to 150 meters and an automatic weapon position at
200 to 250 meters with 3 training practice rounds from the standing
position within 2 minutes from station 3.
3. Engage a troop emplacement at 275 to 300 meters and troops in the open at
325 to 350 meters with 3 training practice rounds from the prone position
within 2 minutes from station 4.
4. Don and clear the M40 field protective mask within 9 seconds and secure
the hood within 6 seconds.
5. Don the NBC gloves.
8-52
NAVMC 3500.44
16 Sep 08
6. Engage a bunker at 135 to 150 meters with 3 training practice rounds from
the standing position within 2 minutes from station 3.
7. Engage an automatic weapon position at 200 250 meters with 3 training
practice rounds from the standing position within 2 minutes from station
3.
8. Remove and stow the M40 field protective mask with hood and NBC gloves.
RELATED EVENTS:
0300-M203-1002 0300-M203-1005 0300-M203-1004
0300-M203-1003
REFERENCES:
1. FM 3-22.31 40-mm Grenade Launcher, M203
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B519 Cartridge, 40mm Target Practice M781 15
RANGE/TRAINING AREA:
Facility Code 17610 Grenade Launcher Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. In the reference Station 1 is zeroing.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
PERFORMANCE STEPS:
1. Clear the weapon.
2. Load the weapon.
3. Unload the weapon.
8-53
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCRP 3-11.1A Commander's Tactical Handbook
3. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
4. TM 08671A-10/1 Operator's Manual, Machinegun, 5.56mm, M249
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A060 Cartridge, 5.56mm Dummy M199 6
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Maintain positive control of the cocking lever throughout clearing.
2. MARADMIN 173-01 no longer authorizes half cock.
3. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
PERFORMANCE STEPS:
1. Pull the bolt to the rear.
2. Place the weapon on safe.
3. Raise cover.
4. Remove ammunition.
5. Change barrel.
6. Reload ammunition.
7. Close cover.
8. Continue target engagement.
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 08671A-10/1 Operator's Manual, Machinegun, 5.56mm, M249
8-54
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task will be performed in concert with a target engagement or with
dummy ammo.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
PERFORMANCE STEPS:
1. Wait 5 seconds to guard against hang fire.
2. Within the next 5 seconds, pull the cocking handle to the rear to guard
against round cook off.
3. Observe for feeding and ejecting of ammunition (If feeding or ejecting
doesn't occur, proceed to task of remedial action).
4. Push cocking handle forward.
5. Engage targets.
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 08671A-10/1 Operator's Manual, Machinegun, 5.56mm, M249
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A060 Cartridge, 5.56mm Dummy M199 6
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
8-55
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
PERFORMANCE STEPS:
1. Remove ammunition source.
2. Determine if barrel is hot or cold.
3. If hot, wait 15 minutes for possibility of cook off.
4. Unload weapon.
5. Inspect ammunition.
6. Perform 5 point safety check.
7. Reload weapon.
8. Engage targets.
9. If weapon fails to fire, clear weapon, and evacuate to higher echelon of
maintenance.
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 08671A-10/1 Operator's Manual, Machinegun, 5.56mm, M249
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
PERFORMANCE STEPS:
1. Clear the weapon.
8-56
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. TM 08671A-10/1 Operator's Manual, Machinegun, 5.56mm, M249
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
PERFORMANCE STEPS:
1. Point weapon in a safe direction.
2. Clear weapon.
3. Set mechanical zero.
4. Select a suitable target downrange, preferably at battlesight range - 300
meters.
5. Set rear elevation knob to range to target.
6. Fire a 6-8 round burst at the target observing the impacts (aiming point
is 6 o'clock).
7. Make corrections for windage (windage knob) and elevation (peep sight) on
the rear sights. If the initial impacts are off of the target by more
than 18 inches for elevation use the front sight post to adjust elevation.
Elevation stays at initial range.
8. Fire another 6-8 round burst at target (aiming point is 6 o'clock).
9. Make corrections for windage (windage knob) and elevation (peep sight) on
the rear sights. Elevation stays at initial range to target.
10. Continue this process until impacts are on target.
11. Once field BZO has been obtained, loosen screws on the sliding index scale
and slide the scale so that the white index line aligns with the white
index line on the windage.
12. SPARE BARREL:
13. Fire a 6-8 round burst at the target observing the impacts (aiming point
is 6 o'clock).
14. Make corrections for elevation ONLY using the front sight post. NO
corrections are made on the rear sight assembly!
15. Fire another 6-8 round burst to confirm zero.
8-57
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 40
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
2. Field BZO can be conducted at ANY range, however, 300 meters is the
preferred distance.
0300-M249-1007: Fire the squad automatic weapon Basic Course (Gunnery Table
I) (B)
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369
PERFORMANCE STEPS:
1. The automatic rifleman prepares a belt of 18 rounds.
2. The automatic rifleman fires three (3) 6-8 round burst, one at each
practice silhouette, from left to right or right to left, to confirm
bursts are concentrated center mass.
3. The automatic rifleman prepares a belt of 136 rounds.
4. In a time limit of 30 seconds, engage targets 1 through 2 (three
silhouettes total) using searching fire with a 6-8 round burst per target.
5. In a time limit of 40 seconds, engage targets 3 through 4 (four
silhouettes total) using traversing fire with a 6-8 round bursts per
target.
8-58
NAVMC 3500.44
16 Sep 08
PREREQUISITE EVENTS:
0300-M249-1009 0300-M249-1006
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 154
RANGE/TRAINING AREA:
Facility Code 17510 Basic 10M-25M Firing Range (Zero)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Total possible score for Table I is 102 points, with a minimum of 71
points for a passing score.
2. Only rounds that impact on or within the line of the silhouette will be
scored.
3. Each hit is scored as one point.
4. Only 6 rounds per silhouette will be scored, for a total score of 6
points per silhouette.
8-59
NAVMC 3500.44
16 Sep 08
5. Table I score does not constitute complete qualification for the M249
gunner. Table II (Multiple Engagement Course) must also be fired, and the
two scores added together in order to achieve a qualification score.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
PERFORMANCE STEPS:
1. Assume a supported prone firing position.
2. Make a condition one weapon.
3. Identify target(s).
4. Engage targets.
5. Make a condition four weapon.
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 100
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
8-60
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. PRIMARY BARREL:
2. Point the weapon in a safe direction.
3. Clear the weapon.
4. Set mechanical zero on the weapon.
5. Fire 3 rounds individually at target 1 (aiming point is center mass).
6. Go down range and mark shots.
7. Make corrections for windage (windage knob) and elevation (peep sight) on
the rear sights. If initial impacts are off of the target by more than 5
centimeters for elevation use the front sight post to adjust elevation.
Elevation stays at 300 meters.
8. Fire 3 more rounds individually at target 1 (aiming point is center mass).
9. Go down range and mark shots.
10. Make corrections for windage (windage knob) and elevation (peep sight) on
the rear sights. Elevation stays at 300 meters.
11. Fire last 3 rounds individually on target 1 (aiming point is center mass).
12. Fire a 3 round burst at target 2 to confirm zero (aiming point is center
mass).
13. SPARE BARREL:
14. Fire 3 rounds individually at target 3 (aiming point is center mass).
15. Go down range and mark targets.
16. Make corrections for elevation ONLY on the front sight post.
17. Fire 3 more rounds individually to confirm zero.
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 18
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, MSGT, MGYSGT, 2NDLT, 1STLT,
CAPT
8-61
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Ensure that you and the casualty are no longer under direct enemy fire.
2. Communicate the situation to the unit leader.
3. Ensure the tactical situation allows for time to treat casualty before
initiating any medical procedures.
4. Evaluate a casualty for shock.
5. Determine level of consciousness.
6. Assess the casualty's airway.
7. Assess the casualty for chest injuries.
8. Identify and control major bleeding.
9. Assess for climatic injuries (hot or cold).
10. Identify and treat other wounds (dress all wounds, including exit wounds,
splint obvious fractures).
REFERENCES:
1. MCRP 3-02G First Aid (Dec 02)
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, 2NDLT, 1STLT, CAPT
CONDITION: Given an assigned weapon and route, while wearing a fighting load.
PERFORMANCE STEPS:
1. Cross a wall.
2. Observe around a corner.
3. Move past a window.
4. Move past a door.
5. Move parallel to a building.
6. Cross a danger area.
REFERENCES:
1. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task can be trained to standard through the use of the Visual
Battlefield System 1 (VBS1).
8-62
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT
PERFORMANCE STEPS:
1. Approach entry way.
2. Stack outside the entry way.
3. Enter the room.
4. Clear assigned sector.
5. Communicate possible threats.
6. Conduct overhead check.
7. Conduct vital checks.
8. Mark entry way.
9. Provide security.
REFERENCES:
1. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Two personnel are required at a minimum to clear a room.
2. Be able to identify plain sight items of intelligence.
3. This task can be trained to standard through the use of the Visual
Battlefield System 1 (VBS1).
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Inspect SL-3 components for accountability and serviceability.
2. Assemble/mount device.
8-63
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. TM 09500A-10/1 Operator's Manual Night Vision Goggles AN/PVS-7B and
AN/PVS-7D
2. TM 10091B/10092B-10/1 AN/PAS-13B(V)2 & 3 THERMAL SIGHT
3. TM 10271A-10/1 Operator's Manual, Monocular NVD, AN/PVS-14
4. TM 10470A-12&P/1A Operator's and Unit Maintenance Manual, Target Pointer
Illuminator/Aiming Light, AN/PEQ-2A
5. TM 10796-12&P Operators Manual for AN/PVS-17/17B/17C Miniature Night Sight
6. TM 11-5855-213-10 Operator's Manual for Night Vision Sight Individual
Served Weapon AN/PVS-4
7. TM 11-5855-214-10 Operator's Manual, Night Vision Sight, Crew-Served
Weapon AN/TVS-5
8. TM 11-5855-238-10 Operator's Manual for Night Vision Goggles Ground Use:
AN/PVS-5 and AN/PVS-5A
9. TM 11-5855-262-10-2 Operator's Manual for Night Vision Goggles, AN/PVS-7B
10. TM 11-5855-301-12&P Operator's and Unit Maintenance Manual, Light, Aiming,
Infrared, AN/PAQ-4B (IAL)
11. TM 11-5855-303-12&P AN/PVS-10 Night Vision Scope
12. TM 11-5860-201-10 Laser Infrared Observation Set AN/GVS-5
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Place compass at survey point.
2. Remove all magnetic attractions.
3. Sight in on azimuth marker.
4. Calculate error.
5. Record error on compass.
REFERENCES:
1. FM 3-25.26 Map Reading and Land Navigation
8-64
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Identify the following marginal information found on a topographical map:
declination diagram, bar scale, contour interval, note and legend.
2. Identify the three types of contour lines found on a topographical map.
3. Identify the ten terrain features found on a topographical map.
4. Identify the six colors used on a topographical map, and what they
represent.
5. Plot a point on a map using the protractor.
6. Determine the six-digit grid coordinate of a specific point on a map.
7. Determine the straight line and/or curved line distance between two points
on a map.
8. Determine a back azimuth.
9. Determine the grid azimuth between two points on a map.
10. Convert a grid azimuth to a magnetic azimuth using the notes that appear
in conjunction with the declination diagram.
11. Convert a magnetic azimuth to a grid azimuth using the notes that appear
in conjunction with the declination diagram.
12. Orient a map using terrain association.
13. Navigate to objective(s).
REFERENCES:
1. FM 3-25.26 Map Reading and Land Navigation
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Ensure the military aspects of terrain are identified.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
8-65
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Determine pace count.
2. Hold the lensatic compass level.
3. Rotate the bezel ring until the luminous line is over the fixed black
index line.
4. Divide the desired azimuth by 3 to determine the number of clicks to
rotate the bezel ring.
5. Rotate the bezel ring to the left the appropriate number of clicks.
6. Assume the center-hold position.
7. Rotate your body until the north-seeking arrow is aligned with the
luminous line.
8. Proceed forward in the direction of the front cover's sighting wire.
9. Maintain alignment of the luminous line and north-seeking arrow until the
desired distance has been traversed.
10. Bypass obstacle as required.
11. Perform deliberate offset as required.
REFERENCES:
1. FM 3-25.26 Map Reading and Land Navigation
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17412 Land Navigation Course
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Receive warning order.
2. Conduct preparations in accordance with warning order.
3. Rehearse individual actions.
4. Receive the order.
8-66
NAVMC 3500.44
16 Sep 08
5. Stand inspection.
6. Test fire weapon.
REFERENCES:
1. MCRP 3-11.1A Commander's Tactical Handbook
2. MCWP 3-11.2 Marine Rifle Squad
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task applies to all combat operations.
2. Operational Risk Management (ORM) should be incorporated into the
planning process.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Negotiate obstacles.
2. Perform high crawl.
3. Perform low crawl.
4. Perform individual actions during fire and movement (fight from cover to
cover).
5. Perform individual actions in a wedge.
6. Perform individual actions in a column.
7. Perform individual actions in skirmishes (right) (left).
8. Perform individual actions in an echelon (right) (left).
9. Perform the "Night Walk".
10. Perform individual actions in response to ground/aerial illumination.
11. Perform the creeping technique for night movement.
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
2. MCWP 3-11.3 Scouting and Patrolling
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
L312 Signal, Illumination Ground White St 1
8-67
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Explain the fighter/leader concept.
2. Identify the base unit.
3. This task can be trained to standard through the use of the Visual
Battlefield System 1 (VBS1).
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 1STSGT, MSGT, 2NDLT, 1STLT,
CAPT, MAJ
PERFORMANCE STEPS:
1. Search the detainee.
2. Tag detainee and items collected.
3. Report number of personnel detained.
4. Evacuate detainee.
5. Segregate detainee.
6. Safeguard detainee.
REFERENCES:
1. MCRP 4-11.8D Detainee Operations
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369
8-68
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Maintain noise and light discipline.
2. Provide security.
3. Perform individual movement as a member of a patrol.
4. Travel through gaps or lanes in obstacle plan as directed by the patrol
leader.
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
2. MCWP 3-11.3 Scouting and Patrolling
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
PERFORMANCE STEPS:
1. Prepare for the patrol.
2. Perform individual actions during passage of lines.
3. Perform individual actions at halts.
4. Occupy rally points.
5. Perform immediate action drills.
6. Perform individual actions in re-entry of friendly lines.
7. Disseminate information.
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-11.2 Marine Rifle Squad
3. MCWP 3-11.3 Scouting and Patrolling
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task can be trained to standard through the use of the Visual
Battlefield System 1 (VBS1).
8-69
NAVMC 3500.44
16 Sep 08
0300-PAT-1009: Perform immediate actions upon contact with the enemy (A)
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
PERFORMANCE STEPS:
1. Perform individual actions during an immediate halt.
2. Perform individual actions during air observation.
3. Perform individual actions during air attack.
4. Perform individual actions during a hasty ambush.
5. Perform individual actions during an immediate assault.
6. Perform individual actions during a near-counter-ambush.
7. Perform individual actions during a far-counter-ambush.
8. Perform individual actions upon contact with a booby trap.
9. Perform individual actions while crossing a danger area.
10. Perform individual actions during an indirect fire attack.
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-11.2 Marine Rifle Squad
3. MCWP 3-11.3 Scouting and Patrolling
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Explain the fighter/leader concept
2. Identify the base unit.
3. This task can be trained to standard through the use of the Virtual
Battlefield System 1 (VBS1).
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
8-70
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Mount a vehicle.
2. Cover sectors of fire.
3. Perform individual actions during a security halt.
4. Perform individual actions in reaction to improvised explosive devices.
5. Perform individual actions during enemy contact.
6. Dismount a vehicle.
REFERENCES:
1. MCRP 4-11.3F Convoy Operations Handbook
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task can be trained to standard through the use of the Virtual
Battlefield System 1 (VBS1) or Combat Convoy Simulator (CCS).
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, MSGT, 1STSGT, SGTMAJ, MGYSGT,
2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Determine threat.
2. Detect visual indicators of suspected ground emplaced IED.
3. Detect visual indicators of suspected vehicle borne IED.
4. Detect visual indicators of suspected suicide vehicle borne IED.
5. Detect visual indicators of suspected a suicide bomber.
REFERENCES:
1. JIEDDTF 05-23 Joint Improvised Explosive Device Defeat Organization
Tactics, Techniques and Procedures Handbook
2. MCIP 3-17.01 IED Defeat
3. MCWP 3-11.2 Marine Rifle Squad
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369
8-71
NAVMC 3500.44
16 Sep 08
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, MSGT, MGYSGT, 2NDLT, 1STLT,
CAPT
PERFORMANCE STEPS:
1. Report contact to higher.
2. Establish local security, including search for secondary devices.
3. Conduct offensive movement to contain, find, clear, or flush potential
enemy personnel.
4. Clear into and secure the blast site. This includes searching for
secondary devices along movement into kill zone. The employment of CREW
protects the element clearing the blast site.
5. Treat, process, and evacuate casualties:
a. Injured Marine applies self-aid,
b. Marines apply buddy aid to the injured. Individuals demonstrate first
aid knowledge in the treatment of fractures, penetrating wounds, and
sucking chest wounds,
c. Evacuate WIA and KIA to casualty collection point (CCP) using
designated carrying parties or litter teams, using covered and
concealed casualty evacuation routes,
d. Unit corpsmen conduct triage at CCP to maximize number of survivors.
e. Establish evacuation priorities,
f. Begin casualty reporting and tracking immediately after an
individual(s) is wounded, starting at the lowest unit level and
terminating at higher headquarters.
6. Recover damaged vehicles. The employment of CREW supports recovery.
7. Conduct site exploitation as the situation allows, including requesting
qualified personnel for post-blast analysis and questioning local
civilians.
REFERENCES:
1. JIEDDTF 05-23 Joint Improvised Explosive Device Defeat Organization
Tactics, Techniques and Procedures Handbook
2. MCIP 3-17.01 IED Defeat
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
8-72
NAVMC 3500.44
16 Sep 08
STANDARD: To assume a position that allows fire to be placed upon the enemy
while taking advantage of available cover and concealment.
PERFORMANCE STEPS:
1. Make a visual assessment of the assigned area.
2. Select a position that offers the best cover and concealment.
3. Select a position that affords right or left handed shooting.
4. Fire around cover.
5. Remain far enough back from the cover, so the weapon or muzzle flash does
not extend beyond it.
6. Avoid being silhouetted against a light colored background.
7. Fire from a kneeling or prone position, to reduce exposure to enemy fire.
REFERENCES:
1. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
PERFORMANCE STEPS:
1. Avoid all unnecessary movement.
2. Search field of view using the off-center vision method.
3. Search field of view using the scanning method.
4. Search field of view using the dark adaptation method.
5. Preserve night vision when subjected to lighted areas or illumination.
6. Apply techniques that enhance hearing.
REFERENCES:
1. MCWP 3-11.3 Scouting and Patrolling
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
8-73
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task can be trained to standard through the use of the Virtual
Battlefield System 1 (VBS1).
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0321, 0331, 0341, 0351, 0352,
0369
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 2NDLT, 1STLT, CAPT
PERFORMANCE STEPS:
1. Conduct noise discipline.
2. Conduct light discipline.
3. Conduct field hygiene.
4. Conduct sanitation of an area.
5. Conduct Pre-Combat Checks and Inspections as appropriate (PCC/PCIs).
6. Maintain communications.
7. Maintain security (Guardian Angel).
8. Fight from cover to cover.
9. Ensure Positive Identification (PID).
10. Maintain marksmanship skills.
11. Conduct Anti-Terrorism/Force Protection Random Anti-Terrorism Measures
(RAMs).
12. Conduct physical security.
13. Ensure personnel and equipment accountability.
14. Maintain equipment in a state of readiness.
15. Ensure tactical situational awareness.
16. Provide reports as necessary.
REFERENCES:
1. MCRP 3-11.1A Commander's Tactical Handbook
2. MCWP 3-11.2 Marine Rifle Squad
3. MCWP 3-11.3 Scouting and Patrolling
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
8-74
NAVMC 3500.44
16 Sep 08
CONDITION: Given an AT-4 light anti-armor weapon which fails to fire, while
wearing a fighting load.
PERFORMANCE STEPS:
1. Yell "MISFIRE."
2. Maintain the original sight picture.
3. Release the forward safety.
4. Cock the weapon.
5. Check the back-blast area.
6. Attempt to fire the launcher.
7. If the launcher still fails to fire, release the forward safety and return
the cocking lever to the SAFE uncocked position.
8. Take the launcher off of the shoulder, keeping the muzzle pointed toward
the target.
9. Reinsert the transport safety pin.
10. Keep weapon pointed downrange for two minutes.
11. Lay the faulty launcher on the ground with the muzzle pointing toward
target.
12. Notify team leader.
REFERENCES:
1. FM 3-23.25 Light Anti-Armor Weapons
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. In a combat situation, omit performance steps 1 and 9. In combat,
break off the sights to identify a misfired launcher.
2. Use an expended rocket to practice this task
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369,
MCCS
8-75
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Inspect the weapon.
2. Prepare the weapon for firing.
3. Estimate range to target.
4. Ensure the sights are adjusted for the correct range of the target.
5. Visually inspect and clear the back blast area.
6. Engage the target with the weapon.
7. Dispose of expended tube.
REFERENCES:
1. FM 3-23.25 Light Anti-Armor Weapons
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
HA29 Rckt 66mm HE, M72A7, LAW W/GRAZE 1
HA21 Rocket, 21mm Sub-Caliber, M72AS Trai 2
C995 Cartridge and Launcher, 84mm M136 AT 1
A358 Cartridge, 9mm TP-T M939 for AT-4 Tr 8
RANGE/TRAINING AREA:
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17640 Antiarmor Tracking And Live-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Outside of the Infantry Community, this event should be supported with
one (1) rocket per squad sized unit in order to enhance the training value
of the 9mm Tracer trainer rounds.
2. This task should be trained to standard through the use of the Indoor
Simulated Marksmanship Trainer (ISMT) prior to the expenditure of live
rounds.
3. This event supports both the AT-4 and the LAW.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369
8-76
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Identify types and classes of threat weapons.
2. Perform a function check on small arm threat weapons.
3. Render the weapon safe.
REFERENCES:
1. FM 100-2-3 The Soviet Army
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The Jane's small arms of the world can be used as a reference.
2. This task is designed to accommodate perceived small arm threats.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369
CONDITION: Given a Light Anti-Armor Weapon which fails to fire, while wearing
a fighting load.
PERFORMANCE STEPS:
1. Squeeze the trigger again.
2. Keep the launcher on your shoulder, announce "MISFIRE," and wait ten
seconds.
3. Place the trigger arming handle on "SAFE".
4. Move the launcher from your shoulder and wait one minute.
5. Extend the launcher to cock it again, and check backblast area.
6. Place the launcher back on your shoulder.
7. Pull the arming handle to the arm position.
8. Aim and squeeze the trigger bar.
9. If the launcher again fails to fire, wait 10 seconds before returning the
trigger arming handle to the "SAFE" position.
10. Keep the launcher trained on the target area for at least one minute, DO
NOT collapse the launcher.
11. Move the launcher to a safe area and dispose.
12. Notify team leader.
8-77
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 3-23.25 Light Anti-Armor Weapons
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. In a combat situation, the following steps should be followed instead
of the Performance Steps listed for training:
a. Squeeze the trigger again immediately.
b. If the launcher still fails to fire, place the trigger arming handle
on "SAFE."
c. Partly collapse the launcher, then extend it to cock it again.
d. Place it on your shoulder, check the backblast area again, and then
arm, aim, and fire the launcher.
e. If the LAW still fails to fire, squeeze the trigger again and return
the trigger arming handle to "SAFE."
f. Collapse the launcher, set it aside, and try another one.
g. As soon as possible, dispose of the LAW.
8-78
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369
CONDITION: Given a unit wearing fighting loads and an area containing tracks.
PERFORMANCE STEPS:
1. Analyze tracks.
2. Report information obtained to higher headquarters.
3. Determine course of action.
4. Task organize unit.
5. Brief personnel.
6. Follow tracks.
7. Reacquire tracks as needed.
8. Modify tactical formation as needed.
9. Report information as a result of ongoing analysis.
PREREQUISITE EVENTS:
0300-CMBH-1004
RELATED EVENTS:
0300-CMBH-1004
REFERENCES:
1. MCWL 3-35.3X Combat Hunter TTPs
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369
8-79
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Receive the order.
2. Conduct mission planning.
3. Task organize unit.
4. Conduct rehearsals.
5. Conduct PCCs/PCIs.
6. Issue order.
7. Cross the LOD.
8. Assume initial tracking formations.
9. Acquire a track(s).
10. Analyze track(s).
11. Report information.
12. Conduct track exploitation.
13. React to enemy contact/anti-tracking techniques.
14. Re-exploit.
15. Upon gaining contact or obtaining actionable information, report
information.
RELATED EVENTS:
0300-CMBH-1001 0300-CMBH-1002 0300-CMBH-1003
0300-CMBH-2004 0300-CMBH-2001 0300-CMBH-2003
0300-CMBH-1004
REFERENCES:
1. MCWL 3-35.3X Combat Hunter TTPs
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369
PERFORMANCE STEPS:
1. Identify anti-tracking techniques being employed.
2. Report information to higher headquarters when needed.
3. React to enemy contact as needed.
4. Overcome passive counter measures (Covering tracks, false trails, etc.).
5. Defeat active counter measures (Booby trap, ambush, etc.).
6. Continue exploitation.
RELATED EVENTS:
0300-CMBH-1001 0300-CMBH-1002 0300-CMBH-1003
8-80
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCWL 3-35.3X Combat Hunter TTPs
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369
PERFORMANCE STEPS:
1. Determine type of counter measure to employ.
2. Employ passive counter measures (cover tracks, false trails, etc.).
3. Employ active counter measures (Booby trap, Ambush, etc.).
4. Report information to higher headquarters as required.
RELATED EVENTS:
0300-CMBH-1001 0300-CMBH-1002 0300-CMBH-1003
0300-CMBH-2003 0300-CMBH-2001 0300-CMBH-2002
0300-CMBH-1004
REFERENCES:
1. MCWL 3-35.3X Combat Hunter TTPs
GRADES: SGT
CONDITION: Given a map, location for a landing zone, and a radio with
frequency.
8-81
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Transmit mission number.
2. Transmit location of landing zone.
3. Transmit unit call sign.
4. Transmit of method of helicopter landing zone marking.
5. Transmit wind direction and velocity.
6. Transmit the elevation, size, and shape of the landing zone.
7. Transmit location, size, and type of any obstacles.
8. Transmit friendly positions.
9. Transmit known and suspected enemy positions.
10. Transmit time, direction, and distance of last enemy fire received.
11. Transmit approach and retirement directions.
12. Transmit quantity of personnel and equipment.
RELATED EVENTS:
0300-COMM-1004 0300-COMM-1005 0300-COMM-2006
0300-COMM-2004 0300-COMM-1006
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
GRADES: SGT
PERFORMANCE STEPS:
1. Submit observer's call sign.
2. Submit observer's location.
3. Submit the azimuth to the enemy gun.
4. Submit the time shelling started.
5. Submit the time shelling stopped.
6. Submit coordinates of area shelled
7. Submit nature of fire: destruction, harassing, or registration.
8. Submit the size and number of shells received.
9. Submit the flash bang time in seconds.
10. Submit the damage assessment.
11. Submit additional remarks as necessary.
RELATED EVENTS:
0300-COMM-1004 0300-COMM-1005 0300-COMM-2006
0300-COMM-2004 0300-COMM-2005 0300-COMM-1006
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
8-82
NAVMC 3500.44
16 Sep 08
GRADES: SGT
PERFORMANCE STEPS:
1. Transmit casualty name, initials, last four digits of SSN.
2. Transmit date time of incident.
3. Transmit six digit grid location of casualty.
4. Transmit types of wounds.
5. Transmit portion of body affected.
6. Transmit seriousness of the wound.
7. Transmit if casualty requires medical evacuation.
8. Transmit the activity the casualty was engaged in at the time of injury.
9. Transmit the cause of the wound.
RELATED EVENTS:
0300-COMM-1004 0300-COMM-1005 0300-COMM-2006
0300-COMM-2004 0300-COMM-2005 0300-COMM-1006
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This report should be repeated for each casualty.
CONDITION: Given a UHF radio with a fill, a frequency or net ID, and a
distant station, while wearing a fighting load.
PERFORMANCE STEPS:
1. Inspect radio and components.
8-83
NAVMC 3500.44
16 Sep 08
2. Assemble components.
3. Connect to a power source (Batteries/vehicle).
4. Operate controls and indicators (fills, net IDs, frequency, time, etc.).
5. Communicate with a distant station.
6. Troubleshoot as required.
7. Maintain radio and components.
8. Remove power source.
9. Disassemble components.
10. Inspect radio and components.
RELATED EVENTS:
0300-COMM-1004 0300-COMM-1005 0300-COMM-1006
0300-COMM-2006 0300-COMM-2002 0300-COMM-2003
0300-COMM-2005 0300-COMM-2001
REFERENCES:
1. MCRP 3-40-3_ Multi-Service Communications Procedures and Tactical Radio
Procedures in Joint Environment
2. MCRP 6-22C RADIO OPERATOR'S HANDBOOK
3. TM 11-5820-890-10-8 SINCGARS GROUND COMBAT NET RADIO, ICOM
PERFORMANCE STEPS:
1. Inspect radio/device and components.
2. Assemble components.
3. Connect to a power source (Batteries/vehicle).
4. Operate controls and indicators (fills, net IDs, frequency, time, etc.).
5. Communicate with a distant station.
6. Troubleshoot as required.
7. Maintain radio and components.
8. Remove power source.
9. Disassemble components.
10. Inspect radio/device and components.
RELATED EVENTS:
0300-COMM-1005 0300-COMM-1006 0300-COMM-2001
0300-COMM-2006 0300-COMM-2003 0300-COMM-2004
0300-COMM-2002
8-84
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCRP 6-22C RADIO OPERATOR'S HANDBOOK
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Current Technical Manuals are not available. Specific technical
information can be obtained through the manufacturer.
2. This task is designed for any SATCOM device designated for use at the
unit operational level.
PERFORMANCE STEPS:
1. Determine type of wavelength required.
2. Identify type of field expedient antenna (Omni-directional or
Directional).
3. Compute length of antenna.
4. Gather required materials (insulators, wires, resistors, etc.).
5. Select a site that offers the type of comm shot required.
6. Construct the antenna.
7. Connect antenna to the radio/device.
8. Ground radio/device.
9. Establish communication with the distant station.
10. Troubleshoot as required.
RELATED EVENTS:
0300-COMM-1004 0300-COMM-2005 0300-COMM-2004
0300-COMM-1005
REFERENCES:
1. MCRP 6-22C RADIO OPERATOR'S HANDBOOK
GRADES: SGT
8-85
NAVMC 3500.44
16 Sep 08
CONDITION: Given an order, a radio with frequency, call signs, and priorities
of fire.
STANDARD: To support the scheme of maneuver and commander's guidance for fire
support.
PERFORMANCE STEPS:
1. Receive an order.
2. Determine targets that are needed to support mission.
3. Determine tactical control measures.
4. Determine fire support control measures.
REFERENCES:
1. MCWP 3-16.6A Supporting Arms Observer, Spotter and Controller (FMFM 6-8)
0300-FSPT-2002: Call for indirect fire using the grid method (A)
GRADES: SGT
PERFORMANCE STEPS:
1. Determine target description.
2. Determine/estimate the location of the target using grid coordinates.
3. Determine the direction to the target from the observer's position in
mils.
4. Determine/estimate the distance to the target from the observer's position
in meters.
5. Establish an observer to target factor.
6. Determine the method of engagement.
7. Determine the method of fire and control.
8. Initiate a call for fire by transmitting observer identification and
warning order to the fire direction center.
9. Transmit a target location using an eight digit grid coordinate to the
fire direction center.
10. Transmit a target description, method of engagement, and method of fire
and control to the fire direction center.
11. Receive a message to observer from the fire direction center.
12. Receive "shot, over" from the fire direction center.
13. Transmit "shot, out" to the fire direction center.
14. Observe the impact of the round.
15. Spot the round for height of burst, range, and deviation from the target.
8-86
NAVMC 3500.44
16 Sep 08
16. Using the height of burst (HOB) spotting, determine the height of burst
correction in meters.
17. Using the range spotting, determine the range correction in meters using
successive or hasty bracketing.
18. Using the deviation spotting and the OT factor (The mil relation formula
or WERM rule), determine the deviation correction in meters.
19. Transmit the direction to the target from the observer's position in mils
grid.
20. Transmit a correction for deviation, range, and height of burst.
21. Repeat performance steps 11 through 18 until the target is within the
effective casualty radius/HOB of the round.
22. Transmit a request to fire for effect to the fire direction center.
23. Receive "rounds complete, over" from the fire direction center.
24. Transmit "rounds complete, out" to the fire direction center.
25. Determine the effect on target.
26. Determine refinement corrections.
27. Transmit refinement correction, record as target if required, an end of
mission request, and battle damage assessment.
RELATED EVENTS:
0300-FSPT-2001 0300-FSPT-2003 0300-FSPT-2005
0300-COMM-1005 0300-FSPT-2004
REFERENCES:
1. MCWP 3-16.6A Supporting Arms Observer, Spotter and Controller (FMFM 6-8)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
C868 Cartridge, 81mm HE M821/M821A1 with 4
RANGE/TRAINING AREA:
Facility Code 17670 Mortar Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task can be trained to standard using simulation.
0300-FSPT-2003: Call for indirect fire using the polar method (A)
8-87
NAVMC 3500.44
16 Sep 08
GRADES: SGT
PERFORMANCE STEPS:
1. Determine the grid coordinates of your location.
2. Transmit your location coded to the fire direction center.
3. Determine target description.
4. Determine the direction to the target from the observer's position in
mils.
5. Determine the vertical interval between the observer and the target in
meters.
6. Establish an observer to target factor.
7. Determine the method of engagement.
8. Determine the method of fire and control.
9. Initiate a call for fire by transmitting observer identification and
warning order to the fire direction center.
10. Transmit a target location using the direction, distance, and vertical
shift to the target from the observer to the fire direction center.
11. Transmit a target description, method of engagement, and method of fire
and control to the fire direction center.
12. Receive a message to observer from the fire direction center.
13. Receive "shot, over" from the fire direction center.
14. Transmit "shot, out" to the fire direction center.
15. Observe the impact of the round.
16. Spot the round for height of burst, range, and deviation from the target.
17. Using the height of burst spotting, determine the height of burst
correction in meters.
18. Using the range spotting, determine the range correction in meters using
successive or hasty bracketing.
19. Using the deviation spotting and the OT factor, determine the deviation
correction in meters.
20. Repeat performance steps 11 through 18 until the target is within the
effective casualty radius of the round.
21. Transmit a request to fire for effect to the fire direction center.
22. Transmit "rounds complete, out" to the fire direction center.
23. Receive "rounds complete" from the fire direction center.
24. Determine the effect on target.
25. Determine refinement corrections.
26. Transmit refinement correction, record as target if required, an end of
mission request, and battle damage assessment.
RELATED EVENTS:
0300-COMM-1005 0300-FSPT-2001 0300-FSPT-2005
0300-FSPT-2004 0300-FSPT-2002
REFERENCES:
1. MCWP 3-16.6A Supporting Arms Observer, Spotter and Controller (FMFM 6-8)
8-88
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
C868 Cartridge, 81mm HE M821/M821A1 with 4
RANGE/TRAINING AREA:
Facility Code 17670 Mortar Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task can be trained to standard using simulation.
0300-FSPT-2004: Call for indirect fire using the shift from a known point
method (A)
GRADES: SGT
PERFORMANCE STEPS:
1. Determine the grid coordinates of your location.
2. Transmit your location coded to the fire direction center.
3. Determine target description.
4. Determine the direction to the target from the observer's position in
mils.
5. Determine/estimate the distance to the target from the observer's position
in meters.
6. Determine the vertical interval between the observer and the, target in
meters.
7. Establish an observer to target factor.
8. Determine the method of engagement.
9. Determine the method of fire and control.
10. Initiate a call for fire by transmitting observer identification and
warning order to the fire direction center. The warning order consists of
8-89
NAVMC 3500.44
16 Sep 08
FDC call sign, observer ID, and the target shifted from. (FDC this is FO,
shift from AB-1001, over.)
11. Send the second transmission. It consists of observer to target (OT)
direction, and corrections from a know target. Direction 2850,
(left/right_____, add/drop______, up/down_______, over.)
12. Send the third transmission. It consists of a target description, method
of engagement, and method of fire and control to the fire direction
center. (Dismounted infantry and APCs in the open, HE/RP mix, fire when
ready, over.)
13. Receive a message to observer from the fire direction center.
14. Receive "shot, over" from the fire direction center.
15. Transmit "shot, out" to the fire direction center.
16. Observe the impact of the round.
17. Spot the round for height of burst, range, and deviation from the target.
18. Using the height of burst spotting, determine the height of burst (HOB)
correction in meters.
19. Using the range spotting, determine the range correction in meters using
successive or hasty bracketing.
20. Using the deviation spotting and the OT factor, determine the deviation
correction in meters.
21. Transmit a correction for deviation, range, and height of burst.
22. Repeat performance steps 11 through 18 until the target is within the
effective casualty radius/HOB of the round.
23. Transmit a request to fire for effect to the fire direction center.
24. Receive "rounds complete" from the fire direction center.
25. Transmit "rounds complete, out" to the fire direction center.
26. Determine the effect on target.
27. Determine refinement corrections.
28. Transmit refinement correction, record as target if required, an end of
mission request, and battle damage assessment.
RELATED EVENTS:
0300-COMM-1005 0300-FSPT-2001 0300-FSPT-2005
0300-FSPT-2003 0300-FSPT-2002
REFERENCES:
1. MCWP 3-16.6A Supporting Arms Observer, Spotter and Controller (FMFM 6-8)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
C868 Cartridge, 81mm HE M821/M821A1 with 4
RANGE/TRAINING AREA:
Facility Code 17670 Mortar Range
8-90
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task can be trained to standard using simulation.
GRADES: SGT
PERFORMANCE STEPS:
1. With the aid of a SALUTE report, provide target information and request
firs to higher headquarters via the appropriate radio nets.
2. Determine the elements of a CAS brief (9-line).
3. Determine the elements of a CAS brief (6-line) (USMC RW).
4. Record a CAS check-in brief.
5. Provide the CAS aircraft a talk-on to the target.
6. Provide Battle Damage Assessment (BDA) to the CAS aircraft or JTAC.
PREREQUISITE EVENTS:
0302-FSPT-1304 0302-FSPT-1303
REFERENCES:
1. JP 3-09.3 Control of Aircraft and Missile Joint Tactics, Techniques and
Procedures for Close Air Support
2. MCRP 3-16.6A J-Fire, Multiservice Procedures for the Joint Application of
Fire Power
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17936 Close Air Support Range
Facility Code 17330 Covered Training Area
ROOMS/BUILDINGS:
1. Combined Arms Staff Trainer
8-91
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Type I CAS requires a certified JTAC to control terminal guidance. A
Marine that is not JTAC qualified will complete this task as an observer
(Type II/III CAS) through a JTAC for terminal guidance.
0300-M9-2001: Perform weapons handling procedures with the service pistol (D)
MOS PERFORMING: 0302, 0306, 0317, 0331, 0341, 0351, 0352, 0369
GRADES: PFC, LCPL, CPL, SSGT, GYSGT, MSGT, MGYSGT, CWO-2, CWO-3, CWO-4, CWO-
5, 2NDLT, 1STLT, CAPT, MAJ, LTCOL, COL
PERFORMANCE STEPS:
1. Inspect the pistol.
2. Load, unload, and reload.
3. Apply immediate action.
4. Apply remedial action.
RELATED EVENTS:
0300-M9-2002
REFERENCES:
1. TM 1005A-10/1 Pistol, Semiautomatic, 9mm, M9
MOS PERFORMING: 0302, 0306, 0317, 0331, 0341, 0351, 0352, 0369, MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 1STSGT, MSGT, MGYSGT, SGTMAJ,
CWO-2, CWO-3, CWO-4, CWO-5, 2NDLT, 1STLT, CAPT, MAJ, LTCOL, COL
8-92
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Ensure the weapon is clear.
2. Disassemble the weapon.
3. Inspect for cleanliness and serviceability.
4. Assemble the weapon.
5. Perform a function check.
RELATED EVENTS:
0300-M9-2001
REFERENCES:
1. TM 1005A-10/1 Pistol, Semiautomatic, 9mm, M9
MOS PERFORMING: 0302, 0306, 0317, 0331, 0341, 0351, 0352, 0369, MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 1STSGT, MSGT, SGTMAJ, MGYSGT,
WO-1, CWO-2, CWO-3, CWO-4, CWO-5, 2NDLT, 1STLT, CAPT, MAJ, LTCOL, COL
PERFORMANCE STEPS:
1. Identify the target.
2. Employ the weapon.
3. Assess the target.
RELATED EVENTS:
0300-M9-2001 0300-M9-2004 0300-M9-2002
REFERENCES:
1. TM 1005A-10/1 Pistol, Semiautomatic, 9mm, M9
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A363 Cartridge, 9mm Ball M882 23
RANGE/TRAINING AREA:
Facility Code 17570 Pistol Known Distance (KD) Range
8-93
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0302, 0306, 0317, 0331, 0341, 0351, 0352, 0369, MCCS
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, 1STSGT, MSGT, SGTMAJ, MGYSGT,
WO-1, CWO-2, CWO-3, CWO-4, CWO-5, 2NDLT, 1STLT, CAPT, MAJ, LTCOL, COL
PERFORMANCE STEPS:
1. Engage targets at the 25 yard line.
2. Engage targets at the 15 yard line.
3. Engage targets at the 7 yard line.
RELATED EVENTS:
0300-M9-2001 0300-M9-2003 0300-M9-2002
REFERENCES:
1. MCO 3574.2k Marine Corps Combat Marksmanship Program
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A363 Cartridge, 9mm Ball M882 200
RANGE/TRAINING AREA:
Facility Code 17570 Pistol Known Distance (KD) Range
PERFORMANCE STEPS:
1. Receive the order.
2. Conduct METT-TSL.
3. Conduct route planning/reconnaissance.
4. Determine team/squad organization.
5. Determine duties and responsibilities.
6. Develop communications plan.
8-94
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
0300-MOBL-2003 INF-MOBL-3152
REFERENCES:
1. FM 17-98 Scout Platoon
2. MCRP 3-11.1A Commander's Tactical Handbook
3. TTECG/MAWTS-1 Convoy Battle Skills Handbook
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Convoy operations are not limited to combat. Administrative movements,
movements in CONUS, and any other significant motorized travel are
applicable.
PERFORMANCE STEPS:
1. Inspect tactical vehicle.
2. Perform operator maintenance.
3. Prepare vehicle for assigned mission.
RELATED EVENTS:
0300-MOBL-2003 0300-MOBL-2001
8-95
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. TM 92320-280-10 Technical Manuals for Highly Mobile Multi-Wheeled Vehicle
(HMMWV)
2. TTECG/MAWTS-1 Convoy Battle Skills Handbook
PERFORMANCE STEPS:
1. Operate a tactical vehicle.
2. Navigate to a designated point.
RELATED EVENTS:
0300-PAT-1001 0300-PAT-1002 0300-PAT-2006
0300-MOBL-2001 0300-MOBL-2002 0300-PAT-1003
REFERENCES:
1. FM 3-25.26 Map Reading and Land Navigation
PERFORMANCE STEPS:
1. Receive the order.
2. Conduct METT-TSL analysis.
3. Determine how the mission will be organized, attachments that will be
needed, time line, and identify implied missions that will have to be
accomplished if the mission is to succeed.
4. Write the situation paragraph as a brief statement of the friendly and
enemy situation.
8-96
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
0300-PAT-1004 0300-PAT-2003 0300-PAT-2002
REFERENCES:
1. MCRP 3-11.1A Commander's Tactical Handbook
2. MCWP 3-11.2 Marine Rifle Squad
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task can be trained to standard through the use of the Virtual
Battlefield System 2 (VBS2).
PERFORMANCE STEPS:
1. Determine the squad's mission from higher's mission, commander's intent,
and the squad/team tasks.
2. Analyze the enemy situation to determine the effect on the unit.
3. Analyze the friendly situation to determine the effect on the unit.
4. Analyze the effect of attachments and/or detachments on the unit.
5. Analyze higher's scheme of maneuver and fire support plan.
6. Determine the unit's scheme of maneuver.
7. Determine the unit's fire support plan.
8. Determine subordinate tasks and missions.
9. Task organize the unit.
10. Analyze higher's administration and logistics to determine the effect on
the unit.
11. Determine the unit's administrative and logistic requirements.
12. Analyze higher command and signal plan.
13. Determine the unit command and signal plan.
14. Formulate your determinations into the five-paragraph order format.
8-97
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
0300-PAT-2001 0300-PAT-1004 0300-PAT-2003
REFERENCES:
1. MCRP 3-11.1A Commander's Tactical Handbook
2. MCRP 5-12A Operational Terms and Graphics
3. MCWP 3-11.2 Marine Rifle Squad
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task can be trained to standard through the use of the Virtual
Battlefield System 2 (VBS2).
PERFORMANCE STEPS:
1. Assemble the unit around the terrain model.
2. Take role to ensure all members are present.
3. If issuing a mission order, receive a status report for the unit on the
preparatory tasks assigned to them when the warning order was issued.
4. Precede the issuance of the order with the orientation.
5. Issue the entire order before taking questions.
6. Conduct a question and answer session.
7. Conclude the issue process with a time check and announcing the next event
to be accomplished.
RELATED EVENTS:
0300-PAT-1004 0300-PAT-2002 0300-PAT-2001
REFERENCES:
1. MCRP 5-12A Operational Terms and Graphics
2. MCWP 3-11.2 Marine Rifle Squad
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Use terrain models, maps, sand tables or any other material to support
issue of the order.
8-98
NAVMC 3500.44
16 Sep 08
CONDITION: Given an order, map, overlay material, assorted color map pens,
protractor, templates, and references.
PERFORMANCE STEPS:
1. Orient the overlay to the area of operation.
2. Place register marks on the overlay.
3. Plot topographical deviations to the map.
4. Plot mission control measures.
5. Plot fire support control measures.
6. Plot friendly symbols.
7. Plot threat symbols.
8. Annotate title and objective.
9. Annotate marginal information.
10. Annotate security classification.
11. Submit overlay to higher.
12. Distribute copies of the overlay as required.
REFERENCES:
1. FM 3-25.26 Map Reading and Land Navigation
2. MCRP 5-12A Operational Terms and Graphics
PERFORMANCE STEPS:
1. Analyze the mission.
2. Analyze the enemy disposition.
3. Analyze troops and fire support availability.
4. Analyze key terrain features.
5. Analyze terrain with respect to observation and fields of fire.
6. Analyze terrain with respect to cover and concealment.
8-99
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
0300-PAT-2004
REFERENCES:
1. FM 3-25.26 Map Reading and Land Navigation
GRADES: SGT
PERFORMANCE STEPS:
1. Determine six-digit grid of objective from map plot.
2. Input destination coordinates into Global Positioning System.
3. Determine current location coordinates from Global Positioning System
reading.
4. Determine azimuth and distance to objective from Global Positioning
System.
5. Move towards objective.
6. Monitor progress.
RELATED EVENTS:
0300-PAT-1001 0300-PAT-1003 0300-PAT-1002
REFERENCES:
1. FM 3-25.26 Map Reading and Land Navigation
2. TM 09880C-0R Operator's Guide, DAGR Operator's Pocket Guide
3. TM 11-5825-291-13 Operator and Maintenance Manual For Satellite Signal
Navigation Set AN/PSN-11
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Use of COTS products is acceptable for performance of this task.
8-100
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Designate area for debrief.
2. Lay out and account for all unit and individual equipment.
3. Discuss observations of personnel during event.
4. Engage all personnel for inputs.
5. Utilize debriefing format.
6. Provide changes to original plans and overlays.
7. Compile information obtained and submit to higher.
REFERENCES:
1. MCRP 3-0B How to Conduct Training (Nov 96)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. See URP-EVLI-1029: Conduct after action reviews, in the Unit Readiness
Program Training and Readiness Manual.
PERFORMANCE STEPS:
1. Conduct an operational analysis by listing the major steps of the event.
2. Conduct a preliminary hazard analysis by listing the hazards associated
with each step.
3. List the possible causes of the hazards.
4. Determine the degree of risk for each hazard in terms of severity and
probability.
8-101
NAVMC 3500.44
16 Sep 08
5. Develop controls for each hazard to eliminate the hazard or reduce the
risk until the benefit is greater than the risk.
6. Determine residual risk.
7. Make a risk decision.
8. Incorporate the selected controls into SOPs, Letters of Instruction
(LOIs), orders, briefs, training, and rehearsals.
9. Communicate selected controls to the lowest level.
10. Enforce standards and controls.
11. Remain alert for changes and unexpected developments that require time
critical or deliberate ORM.
12. Take corrective action, when necessary.
REFERENCES:
1. MCRP 5-12.1C Risk Management (Feb 01)
GRADES: SGT
PERFORMANCE STEPS:
1. Determine the task to be trained from the platoon training schedule.
2. Review the training standard to determine required resources and the most
appropriate method(s) for delivering instruction.
3. Request the required resources from higher headquarters.
4. Prepare a training outline that explains how the training will be
conducted.
5. Prepare the training area.
6. Assemble the student Marines.
7. Explain the training standard to the students.
8. Conduct a safety brief.
9. Conduct the instruction, in accordance with the training outline.
10. Evaluate the performance of the student Marines or teams, in accordance
with the training standard.
11. Remediate student Marines that do not master the training standard.
12. Brief results of training to Plt Sgt/Plt Cmdr.
13. Update individual training records.
REFERENCES:
1. FM 25-10 Leaders Guide to Lane Training
2. MCRP 3-0B How to Conduct Training (Nov 96)
8-102
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0311, 0317, 0331, 0341, 0351, 0352, 0369
PERFORMANCE STEPS:
1. Receive the warning order.
2. Identify required Class II, III, V, and IX end items needed for the
mission.
3. Identify equipment common to all vehicles within the patrol.
4. Inspect equipment common to all vehicles within the patrol.
5. Plan the storage of gear common to all vehicles within the patrol.
6. Identify additional equipment required for the individual vehicle for the
mission.
7. Plan the storage of additional required equipment for the individual
vehicle.
8. Execute the load plan and store the required equipment in the tactical
vehicle.
9. Identify shortfalls related to the mission bupm-plan.
REFERENCES:
1. FM 17-98 Scout Platoon
2. MCRP 4-11.3F Convoy Operations Handbook
3. TTECG/MAWTS-1 Convoy Battle Skills Handbook
MOS PERFORMING: 0300, 0311, 0317, 0331, 0341, 0351, 0352, 0369
8-103
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Attach and secure the tow bar to the towing shackle bracket of the vehicle
to be towed.
2. Attach and secure the tow bar to the towing shackle bracket of the vehicle
to be towed.
3. Align, attach, and secure tow bar to the pintle hook of the towing
vehicle.
4. Align, attach, and secure tow bar to the pintle hook of the towing
vehicle.
5. Attach safety chain to vehicle frame.
6. Attach safety chain to vehicle frame.
7. Analyze situation to determine removal of propeller shaft in accordance
with TM 2320-10/6B regarding distance and speed of movement.
8. Analyze situation to determine removal of propeller shaft in accordance
with TM 2320-10/6B regarding distance and speed of movement.
9. Place transmission and transfer case shift lever in "N."
10. Place transmission and transfer case shift lever in "N."
11. Release the parking brake lever.
12. Release the parking brake lever.
REFERENCES:
1. TM 2320-10/6B Truck, Utility 1 1/2 Ton (HMMWV)
MOS PERFORMING: 0300, 0311, 0317, 0331, 0341, 0351, 0352, 0369
CONDITION: Given tactical vehicles with a front and/or rear hydraulic winch,
SL-3 materials, and commander's intent.
PERFORMANCE STEPS:
1. Ensure the Marines conducting the recovery are wearing eye protection and
other proper personal protective equipment.
2. Park recovery vehicle facing the object to be winched and place
transmission shift lever in "P."
3. Apply parking brake and chock blocks to rear wheels.
4. Remove remote control switch from stowage box and attach to controller
plug.
5. Move clutch lever 1 and 2 to initiate "lock low gear."
6. Press "out" on remote control to loosen up winch hook.
8-104
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. TM 2320-10/6B Truck, Utility 1 1/2 Ton (HMMWV)
MOS PERFORMING: 0300, 0311, 0317, 0331, 0341, 0351, 0352, 0369
CONDITION: Given tactical vehicles, a tow chain, tow rope, tow straps, SL-3
materials, and commander's intent.
PERFORMANCE STEPS:
1. Recover a tactical vehicle using a tow chain.
2. Recover a tactical vehicle using a tow rope.
3. Recover a tactical vehicle using tow straps.
4. Recover a tactical vehicle using SL-3 materials.
5. Recover a tactical vehicle using a combination of organic self-recovery
materials.
REFERENCES:
1. TM 2320-10/6B Truck, Utility 1 1/2 Ton (HMMWV)
8-105
NAVMC 3500.44
16 Sep 08
CONDITION: Given tactical vehicles, fording kit, snow chains, SL-3 materials,
and commander's intent.
PERFORMANCE STEPS:
1. Analyze the route and adjacent terrain in accordance with OKOCAW.
2. Analyze the route and adjacent terrain in accordance with most recently
developed MCOO.
3. Perform operations over rough and unusual terrain.
4. Mount snow chains.
5. Perform operations during extreme cold and/or when ice or snow is present.
6. Perform operations in dusty and/or sandy areas.
7. Perform operations in rainy and/or muddy terrain.
8. Perform a shallow water fording movement.
9. Perform a deep water fording movement.
REFERENCES:
1. TM 2320-10/6B Truck, Utility 1 1/2 Ton (HMMWV)
MOS PERFORMING: 0300, 0311, 0317, 0331, 0341, 0351, 0352, 0369
PERFORMANCE STEPS:
1. Analyze the terrain in accordance with OKOCAW and METT-TSLC.
2. Camouflage vehicle using micro terrain and heavily vegetated areas.
3. Camouflage vehicle using natural foliage.
4. Camouflage vehicle using the turret down position.
5. Camouflage vehicle using the hull down position.
6. Camouflage vehicle using HMMWV netting system with poles.
7. Camouflage vehicle using HMMWV netting system without poles.
8. Camouflage vehicle using urban hide screening systems.
9. Camouflage vehicle using existing urban structures and debris.
10. Camouflage and/or remove reflective materials on a tactical vehicle.
8-106
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 3-20.98 Reconnaissance Platoon
2. TM 2320-10/6B Truck, Utility 1 1/2 Ton (HMMWV)
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0331, 0341, 0351, 0352, 0369
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, MSGT, MGYSGT, CWO-2, CWO-3,
2NDLT, 1STLT, CAPT, MAJ, LTCOL
STANDARD: To gain and maintain visual contact with enemy forces in accordance
with commander's intent.
PERFORMANCE STEPS:
1. Analyze OKOCAW and METT-TSLC.
2. Analyze established CCIRs and PIRs.
3. Assign TRPs in accordance with likely AOAs.
4. Ensure the orientation of the weapon system is in accordance with the
assigned sector of observation.
5. Use the "W," "Z," and "box" scanning techniques.
6. Observe TAOR in accordance with the limitations of the weapon system.
7. Identify vehicle and weapons dead space while moving/stationary.
8. Identify geometry-of-fire concerns for the weapon system.
9. Use the principles of weapons employment while observing the TAOR.
REFERENCES:
1. FM 17-98 Scout Platoon
2. FM 3-20.98 Reconnaissance Platoon
3. MCWP 3-11.3 Scouting and Patrolling
4. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
5. TM 2320-10/6B Truck, Utility 1 1/2 Ton (HMMWV)
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0331, 0341, 0351, 0352, 0369
8-107
NAVMC 3500.44
16 Sep 08
GRADES: CPL, SGT, SSGT, GYSGT, MSGT, MGYSGT, CWO-2, CWO-3, 2NDLT, 1STLT,
CAPT, MAJ, LTCOL
STANDARD: To gain and maintain visual contact with enemy forces using organic
optical aids in accordance with the commander's intent.
PERFORMANCE STEPS:
1. Scan a sector of observation using organic binoculars.
2. Scan a sector of observation using organic Laser Range Finders (LRF).
3. Scan a sector of observation using organic Night Vision Devices (NVD).
4. Scan a sector of observation using a thermal sight system.
5. Determine distance using stadia lines.
6. Determine distance using the OT factor.
7. Determine distance using the WeRM rule.
8. Determine distance using existing TRPs.
9. Identify optics dead space.
10. Identify possible laser reflection/refraction areas.
REFERENCES:
1. FM 3-20.98 Reconnaissance Platoon
2. MCWP 3-11.3 Scouting and Patrolling
3. TM 09397B-12/1A Operator and Organizational Maintenance Manual for Javelin
4. TM 09500A-10/1 Operator's Manual Night Vision Goggles AN/PVS-7B and
AN/PVS-7D
5. TM 10091B/10092B-10/1 AN/PAS-13B(V)2 & 3 THERMAL SIGHT
6. TM 10271A-10/1 Operator's Manual, Monocular NVD, AN/PVS-14
7. TM 10470A-12&P/1A Operator's and Unit Maintenance Manual, Target Pointer
Illuminator/Aiming Light, AN/PEQ-2A
8. TM 10796-12&P Operators Manual for AN/PVS-17/17B/17C Miniature Night Sight
9. TM 10988B-OR/1 PAS-22
10. TM 11-5855-213-10 Operator's Manual for Night Vision Sight Individual
Served Weapon AN/PVS-4
11. TM 11-5855-214-10 Operator's Manual, Night Vision Sight, Crew-Served
Weapon AN/TVS-5
12. TM 11-5855-238-10 Operator's Manual for Night Vision Goggles Ground Use:
AN/PVS-5 and AN/PVS-5A
13. TM 11-5855-262-10-2 Operator's Manual for Night Vision Goggles, AN/PVS-7B
14. TM 11-5855-303-12&P AN/PVS-10 Night Vision Scope
15. TM 11-5855-308-12&P PEQ-2
16. TM 11-5855-312-10 PAS-13B
17. TM 11-5855-317-10 PAS-13D
18. TM 11064-12&P TA31RCO ACOG Manual
19. TM 11065A-OR Day/Night Sight (DNS) for the M203 Grenade Launcher (AN/PSQ-
18A)
20. TM 2320-10/6B Truck, Utility 1 1/2 Ton (HMMWV)
8-108
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0311, 0317, 0331, 0341, 0351, 0352, 0369
PERFORMANCE STEPS:
1. Execute the hand and arm signal for line.
2. Execute the hand and arm signal for vee.
3. Execute the hand and arm signal for wedge.
4. Execute the hand and arm signal for echelon left/right.
5. Execute the hand and arm signal for coil.
6. Execute the hand and arm signal for move forward.
7. Execute the hand and arm signal for column/file.
8. Execute the hand and arm signal for tactical column.
9. Execute the hand and arm signal for herringbone.
10. Execute the hand and arm signal for dispersion.
11. Execute the hand and arm signal for change of direction.
12. Execute the hand and arm signal for mount/dismount.
13. Execute the hand and arm signal for successive bounding.
14. Execute the hand and arm signal for alternate bounding.
15. Execute the hand and arm signal for cease, shift, and suspend fire.
16. Ensure that movement techniques are conducted in accordance with existing
control measures.
17. Execute signals for movement and control during limited visibility using
IR flashes with current NVD.
REFERENCES:
1. FM 3-20.98 Reconnaissance Platoon
2. TM 2320-10/6B Truck, Utility 1 1/2 Ton (HMMWV)
3. TTECG/MAWTS-1 Convoy Battle Skills Handbook
8-109
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Receive the order.
2. Identify where the individual vehicle will be positioned during tactical
vehicle formations and traveling techniques.
3. Identify and rehearse traveling techniques and vehicle formations to be
used during the operation.
4. Establish a communication plan with the vehicle gunner that allows for
fluid directional corrections during movement.
5. Maneuver the tactical vehicle into a wedge.
6. Maneuver the tactical vehicle into a vee.
7. Maneuver the tactical vehicle online.
8. Maneuver the tactical vehicle into an echelon (left or right).
9. Maneuver the tactical vehicle into a staggered column.
10. Maneuver as part of a tactical vehicle squad using alternative bounding.
11. Maneuver as part of a tactical vehicle squad using successive bounding.
12. Maneuver as part of a tactical vehicle squad using traveling overwatch.
REFERENCES:
1. FM 17-98 Scout Platoon
2. MCRP 4-11.3F Convoy Operations Handbook
3. TTECG/MAWTS-1 Convoy Battle Skills Handbook
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0331, 0341, 0351, 0352, 0369
GRADES: CPL, SGT, SSGT, GYSGT, MSGT, MGYSGT, CWO-2, CWO-3, 2NDLT, 1STLT,
CAPT, MAJ, LTCOL
PERFORMANCE STEPS:
1. Receive the order.
2. Identify where the individual vehicle will be positioned during tactical
vehicle formations and traveling techniques.
3. Identify and rehearse traveling techniques and vehicle formations to be
used during the operation..
4. Establish a communication plan with the Driver that allows for fluid
directional corrections during movement.
5. Direct the tactical vehicle into a wedge.
8-110
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 17-98 Scout Platoon
2. MCRP 4-11.3F Convoy Operations Handbook
3. TTECG/MAWTS-1 Convoy Battle Skills Handbook
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0331, 0341, 0351, 0352, 0369
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, MSGT, MGYSGT, CWO-2, CWO-3,
2NDLT, 1STLT, CAPT, MAJ, LTCOL
PERFORMANCE STEPS:
1. Identify the gun target line of the enemy position.
2. Turn the vehicle towards a position that allows the gunner the fastest
target engagement opportunity IAW unit SOP.
3. Stop the vehicle with the engine block toward incoming fire, if possible.
4. Identify future forward positions and routes to those positions.
5. Identify fall back positions and routes to those positions.
6. Select movement routes that do not cross friendly gun target lines.
7. Monitor positions of adjacent vehicles and their movements.
8. Monitor dismounted forces and their movements.
REFERENCES:
1. FM 17-98 Scout Platoon
8-111
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0331, 0341, 0351, 0352, 0369
GRADES: CPL, SGT, SSGT, GYSGT, MSGT, MGYSGT, CWO-2, CWO-3, 2NDLT, 1STLT,
CAPT, MAJ, LTCOL
STANDARD: To ensure the vehicle reaches its assigned objective in the most
efficient manner possible.
PERFORMANCE STEPS:
1. Study the route to determine collecting and limiting features.
2. Direct the driver to create a relief sketch, annotating checkpoints, key
terrain, collecting and limiting features.
3. Navigate using a compass.
4. Navigate using a GPS.
5. Navigate using a Blue Force Tracker system.
6. navigate using terrain association.
REFERENCES:
1. FM 17-98 Scout Platoon
2. MCRP 4-11.3F Convoy Operations Handbook
3. TTECG/MAWTS-1 Convoy Battle Skills Handbook
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0331, 0341, 0351, 0352, 0369
GRADES: CPL, SGT, SSGT, GYSGT, MSGT, MGYSGT, CWO-2, CWO-3, 2NDLT, 1STLT,
CAPT, MAJ, LTCOL
PERFORMANCE STEPS:
1. Identify ingress route from paved surfaces.
8-112
NAVMC 3500.44
16 Sep 08
2. Select route that does not unduly expose the vehicle to the enemy.
3. Avoid high centering the vehicle.
4. Avoid terrain that will cause a roll-over.
5. Monitor movements of adjacent forces.
REFERENCES:
1. FM 17-98 Scout Platoon
2. MCRP 4-11.3F Convoy Operations Handbook
3. TTECG/MAWTS-1 Convoy Battle Skills Handbook
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0331, 0341, 0351, 0352, 0369
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, MSGT, MGYSGT, CWO-2, CWO-3,
2NDLT, 1STLT, CAPT, MAJ, LTCOL
PERFORMANCE STEPS:
1. Assemble and communicate using VRC 88/89.
2. Assemble and communicate using vehicle mounted AN/PRC-119F.
3. Assemble and communicate using vehicle mounted FBCB2 (Blue Force Tracker).
4. Assemble and communicate using vehicle mounted C2PC (MDACT/EPLRS).
5. Assemble and communicate using vehicle mounted AN/PRC-117F.
6. Assemble and communicate using vehicle mounted AN/PRC-150.
7. Assemble and communicate using vehicle mounted AN/PRC-148 (MBITR).
8. Communicate using DDACT/EPLRS.
9. Communicate using organic Personal Role Radios/Intra-Squad radios.
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0331, 0341, 0351, 0352, 0369
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, MSGT, MGYSGT, CWO-2, CWO-3,
2NDLT, 1STLT, CAPT, MAJ, LTCOL
8-113
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Analyze the route and adjacent terrain/routes in accordance with OKOCAW.
2. Identify areas of interest along route.
3. Establish security positions along route within identified NAIs.
4. Use successive and alternate bounding techniques during route movement.
5. Use traveling and traveling overwatch techniques during route movement.
6. Use maximum reconnaissance forward.
7. Consider the geometry of fire for the weapon system.
8. Use the principles of weapons employment while in movement along route.
9. Coordinate with adjacent units along the route.
REFERENCES:
1. FM 17-98 Scout Platoon
2. FM 3-20.98 Reconnaissance Platoon
3. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
4. TM 2320-10/6B Truck, Utility 1 1/2 Ton (HMMWV)
5. TTECG/MAWTS-1 Convoy Battle Skills Handbook
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0331, 0341, 0351, 0352, 0369
GRADES: LCPL, CPL, SGT, SSGT, GYSGT, MSGT, MGYSGT, CWO-2, CWO-3, 2NDLT,
1STLT, CAPT, MAJ, LTCOL
PERFORMANCE STEPS:
1. Analyze OKOCAW and METT-TSLC.
2. Determine criteria for short and long security halts.
3. Perform a 5-meter visual check in the area surrounding halted vehicle.
4. Perform a 25-meter visual check with organic optics in the area
surrounding the halted vehicle.
5. Dismount the tactical vehicle and conduct a physical check of the area
8-114
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 17-98 Scout Platoon
2. FM 3-20.98 Reconnaissance Platoon
3. TM 2320-10/6B Truck, Utility 1 1/2 Ton (HMMWV)
4. TTECG/MAWTS-1 Convoy Battle Skills Handbook
MOS PERFORMING: 0300, 0311, 0317, 0331, 0341, 0351, 0352, 0369
CONDITION: Given a tactical vehicle and crew, associated night vision assets,
and commander's intent.
PERFORMANCE STEPS:
1. Conduct a service check of Night Vision Devices (NVDs).
2. Ensure that infrared strobes are appropriately placed to identify vehicles
at night.
3. Establish a verbal communication plan with the vehicle gunner to
facilitate fluid directional corrections during movement.
4. Establish a non-verbal communication plan with the vehicle gunner to
facilitate fluid directional corrections during movement.
5. Maneuver a tactical vehicle at night using blackout markers.
6. Maneuver a tactical vehicle at night without blackout markers.
7. Maneuver a tactical vehicle through smoke or battlefield obscurants.
REFERENCES:
1. FM 17-98 Scout Platoon
2. MCRP 4-11.3F Convoy Operations Handbook
3. TTECG/MAWTS-1 Convoy Battle Skills Handbook
8-115
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0331, 0341, 0351, 0352, 0369
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, MSGT, MGYSGT, CWO-2, CWO-3,
2NDLT, 1STLT, CAPT, MAJ, LTCOL
STANDARD: To transport all required items and personnel from the disabled
tactical vehicle quickly and efficiently.
PERFORMANCE STEPS:
1. Receive the command to execute the Bump Plan.
2. Determine critical items that need to be transported to other vehicles.
3. Determine appropriate seating arrangements for all personnel in the
disabled vehicle throughout the rest of the tactical vehicle squad.
4. Determine if the disabled tactical vehicle will be recovered or destroyed
in place.
5. Transport all personnel and critical equipment to their pre-designated
positions, as determined in the order.
6. If the disabled tactical vehicle is to be recovered, rig the vehicle for
tow.
7. Identify shortfalls in the combat load plan.
8. If the disabled tactical vehicle is to be destroyed, remove all maps,
sensitive documents, weapons, equipment and communications devices, and
place a Thermite grenade on the engine block prior to abandoning the
vehicle.
9. If the disabled tactical vehicle is to be destroyed, use an appropriate
organic weapon system to render the vehicle unusable after removing all
sensitive equipment (AT-4, M72A7, SMAW, TOW, Javelin, or heavy machinegun
fire).
REFERENCES:
1. FM 17-98 Scout Platoon
2. MCRP 4-11.3F Convoy Operations Handbook
3. TTECG/MAWTS-1 Convoy Battle Skills Handbook
MOS PERFORMING: 0300, 0311, 0317, 0331, 0341, 0351, 0352, 0369
8-116
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Ensure oil dipstick, transmission dipstick, oil filler cap, and fuel tank
cap are secure.
2. Secure all loose objects within the vehicle.
3. Ensure battery caps are all present and tight.
4. If fording in salt water, disconnect the battery ground cable, disconnect
slave receptacle positive lead at the power stud, and reconnect the
battery ground cable.
5. Place transfer case lever in "H."
6. Enter water slowly and maintain even vehicle speed while fording.
7. Exit water in an area with a gentle slope, if possible.
8. Return transfer case lever to "L."
9. Coordinate with organic motor assets in order to have all applicable
fluids drained and changed.
REFERENCES:
1. TM 2320-10/6B Truck, Utility 1 1/2 Ton (HMMWV)
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0331, 0341, 0351, 0352, 0369
GRADES: CPL, SGT, SSGT, GYSGT, MSGT, MGYSGT, CWO-2, CWO-3, 2NDLT, 1STLT,
CAPT, MAJ, LTCOL
PERFORMANCE STEPS:
1. Receive the order.
2. Conduct map reconnaissance to determine where vehicles may be positioned
during short security halts, long security halts, and OPs.
3. Ensure the gunner understands his sector of fire while moving.
4. Ensure the gunner covers his assigned sector of fire while moving.
5. Ensure the gunner understands his sector of fire while halted.
6. Ensure the gunner covers his assigned sector of fire while halted.
7. Establish TRPs and time the vehicle halts.
8. Identify threats to be engaged by the gunner.
8-117
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 17-98 Scout Platoon
2. MCRP 4-11.3F Convoy Operations Handbook
3. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
4. TTECG/MAWTS-1 Convoy Battle Skills Handbook
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0331, 0341, 0351, 0352, 0369
GRADES: CPL, SGT, SSGT, GYSGT, MSGT, MGYSGT, CWO-2, CWO-3, 2NDLT, 1STLT,
CAPT, MAJ, LTCOL
PERFORMANCE STEPS:
1. Direct the driver to position the vehicle for tactical employment.
2. Deliver a Contact Report to the Patrol Leader.
3. Continuously assess the factors of METT-TSLC and redeploy the vehicle as
necessary to facilitate the development of the tactical situation.
4. Maintain continuous communication with other Vehicle Commanders.
5. Execute the order of the Patrol Leader, when given.
6. Direct the vehicle to react against a blocked ambush (near).
7. Direct the vehicle to react against a blocked ambush (far).
8. Direct the vehicle to react against an urban blocked ambush.
9. Direct the vehicle to react to a detected IED.
10. Direct the vehicle to react to an exploded IED.
11. Direct the vehicle to react to a mine strike.
12. Direct the vehicle to react against an indirect fire attack.
13. Direct the vehicle to react against a sniper attack.
14. Direct the vehicle to react against an air attack.
15. Direct the vehicle to react to a CBRN attack.
16. Direct the vehicle to break contact.
8-118
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 17-98 Scout Platoon
2. MCRP 4-11.3F Convoy Operations Handbook
3. TTECG/MAWTS-1 Convoy Battle Skills Handbook
MOS PERFORMING: 0300, 0311, 0317, 0331, 0341, 0351, 0352, 0369
STANDARD: To ensure the vehicle and each crewmember is prepared and equipped
to execute a given mission.
PERFORMANCE STEPS:
1. Check the hygiene and general health of each Marine in the vehicle.
2. Ensure all communication assets function as designed.
3. Ensure all radio frequencies are loaded properly for the mission.
4. Ensure all ammunition is serviceable and prepared for combat use.
5. Ensure all vehicle first-aid kits/assets are serviceable and stored
correctly.
6. Ensure proper PM and pre-operational checks are conducted on all night
vision/optical equipment to be taken on the mission.
7. Ensure the vehicle has proper fluid levels.
8. Ensure the vehicle has proper tire inflation.
9. Ensure the load plan is correct for the mission.
10. Ensure all towing shackle brackets and pins are present and serviceable.
11. Ensure all other organic recovery assets are serviceable and present.
12. Ensure the vehicle has the proper Class II, III, V, and IX supplies to be
taken on the mission.
13. Ensure the vehicle is properly marked.
14. Ensure the gunner has done proper PM and pre-operational checks on his
weapon system.
15. Ensure each Marine within the vehicle has the proper personal equipment to
be taken on the mission.
16. Ensure dismounts have all required additional equipment to be taken on the
mission.
17. Test fire weapons, if the situation allows.
18. Ensure each member of the vehicle crew understands the mission, their
individual tasks, the tasks of the vehicle, and are properly prepared for
the conduct of PCIs.
REFERENCES:
1. FM 17-98 Scout Platoon
2. MCRP 4-11.3F Convoy Operations Handbook
8-119
NAVMC 3500.44
16 Sep 08
MOS PERFORMING: 0300, 0311, 0317, 0331, 0341, 0351, 0352, 0369
PERFORMANCE STEPS:
1. Study the load plan to become familiar with ammunition placement and
storage within the vehicle.
2. Establish a brevity code with the gunner to facilitate ammunition
reloading.
3. Ensure the ammunition is stored within the vehicle in such a manner that
allows for easy access.
4. Respond to the gunner's command for reload and provide the gunner with the
ammunition requested.
REFERENCES:
1. FM 17-98 Scout Platoon
2. MCRP 4-11.3F Convoy Operations Handbook
3. TTECG/MAWTS-1 Convoy Battle Skills Handbook
MOS PERFORMING: 0300, 0302, 0306, 0311, 0317, 0331, 0341, 0351, 0352, 0369
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, MSGT, MGYSGT, CWO-2, CWO-3,
2NDLT, 1STLT, CAPT, MAJ, LTCOL
CONDITION: Given a tactical vehicle and crew, associated assets, and the
situational need to mount/dismount the vehicle.
8-120
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Receive the order.
2. Study the mission to establish possible areas that may require dismounting
the vehicle to establish security or conduct actions at an objective.
3. Determine appropriate individual equipment to support dismounted
operations for the mission.
4. Coordinate with the driver to store individual equipment in an easily
accessible location within the vehicle that does not impede the vehicle
load plan.
5. Coordinate with the vehicle commander to establish a brevity code for
mounting and dismounting procedures.
6. Dismount the vehicle in response to tactical situations.
7. Mount the vehicle in response to tactical situations.
REFERENCES:
1. FM 17-98 Scout Platoon
2. MCRP 4-11.3F Convoy Operations Handbook
3. TTECG/MAWTS-1 Convoy Battle Skills Handbook
CONDITION: Given a Laser Borelight System (LBS), a service rifle, M249, M240,
M2, or MK-19, marking gear and paper.
PERFORMANCE STEPS:
1. Point weapon in a safe direction.
2. Clear the weapon.
3. Establish initial zero of the borelight.
4. Stabilize the weapon.
5. Select the mandrel for the weapon.
6. Install "WARNING" streamer on mandrel.
7. Attach mandrel to the borelight and "WARNING" streamer.
8. Insert the mandrel into the muzzle of the weapon.
9. Rotate the borelight mode switch to "ON."
10. Secure the target on a flat surface 10 meters from the muzzle so that the
laser dot strikes the dot on the target.
11. While watching the dot made by the laser on the target area, slowly rotate
the borelight in a clockwise direction. If the dot remains stationary the
borelight is aligned and boresighted to the weapon. If BORESIGHTED, STOP
HERE. If the laser dot rotates in a circular pattern then continue with
step 12.
12. Move the target or weapon to a distance of 2 meters.
13. Mark the location of the laser dot.
8-121
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
0300-WPNS-2002
REFERENCES:
1. TM 10471A-12&P/1 Laser Boresight System
CONDITION: Given a Laser Borelight System (LBS), that has been zeroed, an M16
series rifle, M4, M249, M240, M2 or MK-19, TM 10471A-12&P/1 (Table 5-1), the
proper target system, and another Marine.
PERFORMANCE STEPS:
1. Point weapon in a safe direction.
2. Clear the weapon.
3. Stabilize the weapon without cant, and insert the Borelight into the
muzzle.
4. Zero the LBS.
5. Select the target for the weapon and sight combination being boresighted.
6. Position the target oriented in a vertical position 10 meters from the
muzzle.
7. Adjust the target as required to place the borelight laser dot on the
small black dot on the target.
8. Adjust the sighting device, windage, and elevation until centered on the
dog target.
9. Turn off laser and remove the borelight and mandrel from the weapon.
RELATED EVENTS:
0300-WPNS-2001
REFERENCES:
1. TM 10471A-12&P/1 Laser Boresight System
8-122
NAVMC 3500.44
16 Sep 08
CHAPTER 9
PARAGRAPH PAGE
9-1
NAVMC 3500.44
16 Sep 08
CHAPTER 9
9000. PURPOSE. This chapter details the individual events that pertain to
the community. These events are linked to a service-level Mission Essential
Tasks (MET). This linkage tailor’s individual training for the selected MET.
Each individual event provides an event title, along with the conditions
events will be performed under, and the standard to which the event must be
performed to be successful.
9001. ADMINISTRATIVE NOTES. T&R events are coded for ease of reference.
Each event has a 4-4-4 digit identifier. The first four digits represent the
occupational field or military occupational field (0302, or 0369). This
chapter contains infantry officer and staff non-commissioned individual
training events. The second four digits represent the functional or duty
area. The last four digits represent the level, and identifier number of the
event. Every individual event has an identifier number from 001 to 999.
Core Capabilities:
1. Train the platoon in the performance of tasks that support company
training objectives.
2. Maintain the welfare and discipline of a platoon.
3. Make operational planning recommendations to the Infantry Company
Commander.
4. Develop a 5-paragraph operations order to support accomplishment of an
infantry company’s tactical mission.
5. Prepare a map overlay.
6. Prepare platoon reports and briefs.
7. Proficient in use and employment of all weapons organic to a rifle
platoon.
9-2
NAVMC 3500.44
16 Sep 08
8. Engage targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
9. Emplace and recover an M18A1 Claymore mine.
10. Utilize smoke grenades and pyrotechnics for signaling, illumination, and
screening.
11. Navigate to designated points using a topographic map, lensatic compass,
protractor, and global positioning equipment while dismounted and mounted.
12. Perform self-aid and buddy aid.
13. Assume mission oriented protective posture against the effects of
chemical and biological agents.
14. Communicate using proper communications procedures with organic wired
and wireless communications.
15. Call for indirect fire.
16. Request close air support.
17. Integrate supporting fires in accomplishment of an assigned mission.
18. Proficient in Helicopter Landing Zone (HLZ) procedures.
19. Lead the platoon in tactical operations as part of a rifle company.
20. Proficient marksman with T/O weapon.
21. Capable of performing operator maintenance for, and is proficient in
employment of, all optics assigned to the rifle platoon.
22. Proficient in proper combat reporting procedures.
_______________________________________________________________________
BILLET: Weapons Platoon Commander, Infantry Company
The Weapons Platoon Commander carries out the orders of the Infantry Company
Commander. He is proficient with all personal and crew-served weapons within
his unit. He is responsible for ensuring his sections are trained to each
MET assigned by his company commander's METL. He is responsible for
deployment and tactical employment of his unit. He is responsible for the
discipline, morale, and welfare of his unit. A Lieutenant holds the Weapons
Platoon Commander billet.
Core Capabilities:
1. Train the platoon in the performance of tasks that support company
training objectives.
2. Maintain the welfare and discipline of a platoon.
3. Make operational planning recommendations to the Infantry Company
Commander.
4. Make recommendations to the Infantry Company Commander with respect to
employment of the medium machinegun section, the 60mm mortar section, and the
assault section.
5. Proficient in the use and employment of all weapon systems organic to a
rifle company weapons platoon.
6. Make recommendations to the Infantry Company Commander with respect to
integration of indirect fire weapons with an infantry company's tactical
mission.
7. Develop company-level fire support documents in support of company
commander's intent and mission.
8. Coordinate efforts of attached Artillery Forward Observer Team, Naval
Surface Fire Support (NSFS) Spot Team, and Forward Air Control Party in
support of company commander's intent for fire support.
9. Call for indirect fire.
10. Request close air support.
11. Develop a 5-paragraph operations order to support accomplishment of an
infantry company’s tactical mission.
9-3
NAVMC 3500.44
16 Sep 08
_______________________________________________________________________
BILLET: Heavy Machinegun Platoon Commander, Weapons Company
The Heavy Machinegun Platoon Commander carries out the orders of the Weapons
Company Commander, Battalion Commander and Battalion S-3. He is proficient
with all personal and crew-served weapons T/E to his platoon. He is
responsible for deployment and tactical employment of his unit. He is
responsible for the discipline, morale, and welfare of his unit. A First
Lieutenant holds the Heavy Machinegun Platoon Commander billet.
Core Capabilities:
1. Train the platoon in the performance of tasks that support company
training objectives.
2. Make operational planning recommendations to the Weapons Company
Commander.
3. Advise the Battalion Commander and supported company commanders on
tactical employment of the heavy machinegun platoon.
4. Proficient in the use and employment of all weapon systems organic to a
heavy machine gun platoon.
5. Proficient marksman with T/O weapon.
6. Request close air support.
7. Develop a 5-paragraph operations order to support accomplishment of the
heavy machinegun platoon.
8. Prepare a map overlay.
9. Assist in the preparation of company reports and briefs.
10. Prepares company level reports and briefs regarding fire support and
supporting arms.
11. Engage targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
12. Emplace and recover an M18A1 Claymore mine.
13. Utilize smoke grenades and pyrotechnics for signaling, illumination, and
screening.
9-4
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Train the platoon in the performance of tasks that support company/
battalion training objectives.
2. Advise the Fire Support Coordinator (FSC) and Battalion Commander on
tactical employment of the battalion mortar platoon.
3. Proficient in the use and employment of the 81mm mortar.
4. Make recommendations to the Weapons Company Commander with respect to
integration of indirect fire weapons with an infantry company's tactical
mission.
5. Develop company-level fire support documents in support of company
commander's intent and mission.
6. Call for indirect fire.
7. Request close air support.
8. Develop a 5-paragraph operations order to support accomplishment of a
battalion/rifle company’s tactical mission.
9. Prepare a map overlay.
10. Assist in the preparation of company reports and briefs.
11. Prepare company level reports and briefs regarding fire support and
supporting arms.
12. Proficient marksman with T/O weapon.
13. Utilize smoke grenades and pyrotechnics for signaling, illumination, and
screening.
14. Navigate to designated points using a topographic map, lensatic compass,
protractor, and global positioning equipment.
15. Perform self-aid and buddy aid.
16. Assume mission oriented protective posture against the effects of
chemical and biological agents.
17. Communicate using proper communications procedures with organic wired
and wireless communications.
18. Proficient in Helicopter Landing Zone (HLZ) procedures.
19. Proficient in operation of a Fire Support Coordination Center to support
9-5
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Train the platoon in the performance of tasks that support company
training objectives.
2. Advise the Battalion Commander and supported company commanders on
employment of anti-armor weapons.
3. Proficient in the use and employment of the Javelin anti-tank weapon
system.
4. Proficient in the use and employment of the TOW anti-tank weapon system.
5. Make recommendations to the Weapons Company Commander with respect to
integration of direct fire weapons with an infantry company's tactical
mission.
6. Develop company-level fire support documents in support of company
commander's intent and mission.
7. Call for indirect fire.
8. Request close air support.
9. Develop a 5-paragraph operations order to support accomplishment of a
battalion/rifle company’s tactical mission.
10. Prepare a map overlay.
11. Assist in the preparation of company reports and briefs.
12. Prepare company level reports and briefs regarding fire support and
supporting arms.
13. Proficient marksman with T/O weapon.
14. Utilize smoke grenades and pyrotechnics for signaling, illumination, and
screening.
15. Navigate to designated points using a topographic map, lensatic compass,
protractor, and global positioning equipment.
16. Perform self-aid and buddy aid.
17. Assume mission oriented protective posture against the effects of
chemical and biological agents.
18. Communicate using proper communications procedures with organic wired
and wireless communications.
19. Proficient in Helicopter Landing Zone (HLZ) procedures.
20. Lead his platoon in tactical operations as part of a weapons company.
21. Emplace and recover an M18A1 Claymore mine.
_______________________________________________________________________
BILLET: Executive Officer, Rifle Company
The Executive Officer, Rifle Company carries out the orders of the Infantry
Company Commander and serves as Company Commander is his absence. He ensures
each MET of the Company Commander’s METLs is safely and properly satisfied.
He is proficient with all personal and crew-served weapons in the company.
He acts as platoon commander for all company headquarters personnel. He
9-6
NAVMC 3500.44
16 Sep 08
assists the commander to deploy and tactical employ the unit. A First
Lieutenant holds the Executive Officer billet.
Core Capabilities:
1. Assume command in commander's absence.
2. Make operational planning recommendations to the Infantry Company
Commander.
3. Develop a 5-paragraph operations order to support accomplishment of an
infantry company’s tactical mission.
4. Prepare a map overlay.
5. Prepare company reports and briefs.
6. Proficient in use and employment of all weapons organic to a rifle
company.
7. Utilize smoke grenades and pyrotechnics for signaling, illumination, and
screening.
8. Navigate to designated points using a topographic map, lensatic compass,
protractor, and global positioning equipment.
9. Perform self-aid and buddy aid.
10. Assume mission oriented protective posture against the effects of
chemical and biological agents.
11. Communicate using proper communications procedures with organic wired
and wireless communications.
12. Call for indirect fire.
13. Request close air support.
14. Integrate supporting fires in accomplishment of an assigned mission.
15. Proficient in Helicopter Landing Zone (HLZ) procedures.
16. Support the company in tactical operations as part of a rifle battalion.
17. Proficient marksman with T/O weapon.
_______________________________________________________________________
BILLET: Executive Officer, Weapons Company
The Executive Officer, Weapons Company carries out the orders of the Weapons
Company Commander and serves as Company Commander is his absence. He ensures
each MET of the Company Commander's METLs is safely and properly satisfied.
He is proficient with all personal and crew-served weapons in the company.
He acts as platoon commander for all company headquarters personnel. He acts
as the Assistant Fire Support Coordinator in the Company Commander's Absence.
He assists the commander to deploy and tactical employ the unit. A First
Lieutenant holds the Executive Officer billet.
Core Capabilities:
1. Assume command in commander's absence.
2. Make operational planning recommendations to the Weapons Company
Commander.
3. Develop a 5-paragraph operations order to support accomplishment of a
weapons company’s tactical mission.
4. Prepare a map overlay.
5. Navigate to designated points using a topographic map, lensatic compass,
protractor, and global positioning equipment.
6. Prepare company reports and briefs.
7. Proficient in employment of all weapons organic to a weapons company.
8. Utilize smoke grenades and pyrotechnics for signaling, illumination, and
screening.
9. Perform self-aid and buddy aid.
10. Assume mission oriented protective posture against the effects of
chemical and biological agents.
9-7
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Assume command in commander's absence.
2. Proficient in all tasks as assistant headquarters commandant.
3. Prepare company reports and briefs.
4. Proficient marksman with T/O weapon.
5. Perform self-aid and buddy aid.
6. Assume mission oriented protective posture against the effects of
chemical and biological agents.
7. Communicate using proper communications procedures with organic wired and
wireless communications.
8. Call for indirect fire.
9. Request close air support.
10. Utilize smoke grenades and pyrotechnics for signaling, illumination, and
screening.
11. Proficient in all facets of unit training management.
12. Prepare a map overlay.
_______________________________________________________________________
BILLET: Rifle Company Commander, Infantry Battalion
The Rifle Company Commander, Infantry Battalion, carries out the orders of
the Infantry Battalion Commander. He is responsible for training and
employment of his unit. He is responsible for the discipline, morale, and
welfare of his unit. He is responsible for equipment and material readiness.
A Captain holds the Rifle Company Commander billet.
Core Capabilities:
1. Train the company in the performance of tasks that support battalion
training objectives.
2. Maintain the welfare and discipline of a company.
3. Make operational planning recommendations to the battalion operations
officer.
4. Develop a 5-paragraph operations order to support accomplishment of an
infantry company’s tactical mission.
5. Prepare a map overlay.
9-8
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Train the company in the performance of tasks that support battalion
training objectives.
2. Maintain the welfare and discipline of a company.
3. Make operational planning recommendations to the battalion operations
officer.
4. Develop a 5-paragraph operations order to support accomplishment of
weapons company’s tactical mission.
5. Prepare a map overlay.
6. Prepare company reports and briefs.
7. Proficient in use and employment of all weapons organic to a weapons
company.
8. Proficient marksman with T/O weapon.
9. Navigate to designated points using a topographic map, lensatic compass,
protractor, and global positioning equipment.
10. Perform self-aid and buddy aid.
11. Assume mission oriented protective posture against the effects of
chemical and biological agents.
12. Communicate using proper communications procedures with organic wired and
wireless communications.
13. Call for indirect fire.
14. Request close air support.
15. Integrate supporting fires in accomplishment of an assigned mission.
16. Proficient in Helicopter Landing Zone (HLZ) procedures.
17. Lead the company in tactical operations as part of an infantry
battalion.
18. Coordinate efforts of Artillery Forward Observer Team, Naval Surface
Fire Support (NSFS) Spot Team, and Forward Air Control Party in support of
Battalion Commander's intent for fire support.
9-9
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Serve as headquarters commandant for an infantry battalion.
2. Maintain the welfare and discipline of a company.
3. Responsible for installation, movement, and security of tactical
battalion headquarters.
4. Develop a 5-paragraph operations order to support accomplishment of a
headquarters company’s tactical mission.
5. Prepare a map overlay.
6. Prepare company reports and briefs.
7. Proficient marksman with T/O weapon.
8. Navigate to designated points using a topographic map, lensatic compass,
protractor, and global positioning equipment.
9. Perform self-aid and buddy aid.
10. Assume mission oriented protective posture against the effects of
chemical and biological agents.
11. Communicate using proper communications procedures with organic wired
and wireless communications.
_______________________________________________________________________
BILLET: Assistant Operations Officer, Infantry Battalion/Regiment
The Assistant Operations Officer, Infantry Battalion/Regiment, carries out
the orders of the Operations Officer, Infantry Battalion/Regiment. BN S3A
serves as the Operation Officer in his absence. BN S-3A serves as OPT leader
for BN/Regiment operational planning teams. BN S-3A is a Captain.
Regimental S-3A is a Major.
Core Capabilities:
1. Assist operations officer with planning, coordinating, and supervising
tactical employment of units.
2. Assume responsibility of training management for the battalion/regiment.
3. Assist in preparation of battalion/regiment reports and briefs.
4. Prepare a map overlay.
5. Prepare battalion reports and briefs.
6. Proficient marksman with T/O weapon.
7. Perform self-aid and buddy aid.
8. Assume mission oriented protective posture against the effects of
chemical and biological agents.
9. Communicate using proper communications procedures with organic wired and
wireless communications.
_______________________________________________________________________
BILLET: Operations Officer, Infantry Battalion/Regiment
The Operations Officer, Infantry Battalion/Regiment carries out the orders of
the Commanding Officer, Infantry Battalion/Regiment. He runs day-to-day and
future operations of his unit. He employs the battalion/regiment to achieve
commander's intent. BN S-3 is a Major. Regimental S-3 is a LtCol.
9-10
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Assume staff responsibility for organization, training, and tactical
operations of an infantry battalion/regiment.
2. Responsible for planning, coordinating, and supervising tactical
employment of units.
3. Responsible for integrating fires and maneuver to support accomplishment
of battalion/regiment tactical mission.
4. Responsible for determining priorities for allocation of personnel,
weapons, equipment, and ammunition.
5. Make operational planning recommendations to the Battalion/Regimental
Commander.
6. Prepare battalion/regiment reports and briefs.
7. Perform self-aid and buddy aid.
8. Assume mission oriented protective posture against the effects of
chemical and biological agents.
9. Communicate using proper communications procedures with organic wired and
wireless communications.
10. Proficient marksman with T/O weapon.
_______________________________________________________________________
BILLET: Executive Officer, Infantry Battalion/Regiment
The Executive Officer, Infantry Battalion/Regiment, carries out the orders of
the Commanding Officer, Infantry Battalion/Regiment. He serves in the role
of Commander in his absence. A Major holds the Executive Officer, Infantry
Battalion billet. The Executive Officer, Infantry Regiment billet is held by
a Lieutenant Colonel.
Core Capabilities:
1. Second in command, assumes command in commander's absence.
2. Coordinate all action of the battalion/regiment staff.
3. Supervise staff planning process.
4. Supervise operation of the main echelon.
5. Ensures battalion/regiment reports are made as required to higher and
adjacent commanders.
6. Supervise planning of future operations.
7. Maintain awareness of all information flow to Battalion/Regiment
Commander.
8. Proficient marksman with T/O weapon.
_______________________________________________________________________
BILLET: Commanding Officer, Infantry Battalion/Regiment, Infantry Division
The Commanding Officer, Infantry Battalion/Regiment, carries out the orders
of the Commanding Officer, Infantry Battalion/Commanding General, Infantry
Division. He carries, performs operator maintenance for, and is a proficient
marksman with the M9 service pistol. He is responsible for deployment and
tactical employment of his unit. He is responsible for the discipline,
morale, and welfare of his unit. The Commanding Officer, Infantry Battalion
billet is held by a Lieutenant Colonel. A Colonel holds the Commanding
Officer, Infantry Regiment billet.
Core Capabilities:
1. Responsible for effective command and control of a battalion/ regiment.
2. Disseminate guidance and intent to subordinate commanders.
3. Train the battalion/regiment in the performance of tasks that support
mission objectives.
9-11
NAVMC 3500.44
16 Sep 08
9-12
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carry out the orders of the Platoon Commander.
2. Perform the tasks required of a Machinegun Section Leader.
3. Advise the commander on the discipline, appearance, control, conduct, and
welfare of his section.
4. Train his section in the performance of tasks that support platoon and/or
company training objectives.
5. Perform operational risk management.
6. Inspect the condition, care, and economical use of assigned weapons and
equipment.
7. Proficient in the employment of the weapon systems organic to his
assigned section.
8. Direct casualty collection and evacuation for his assigned section.
9. Perform integration of supporting fires in accomplishment of an assigned
mission.
10. Direct the supply and re-supply of his assigned section.
11. Coordinate and supervises the embarkation and debarkation of his
assigned section.
12. Perform operator maintenance for and are a proficient marksman with the
service rifle/carbine and M9 pistol.
13. Utilize smoke grenades and pyrotechnics for signaling, illumination, and
screening.
14. Navigate to designated points using a topographic map, lensatic compass,
protractor, and global positioning equipment while dismounted and mounted.
15. Communicate using proper communications procedures with organic wired
and wireless communications.
16. Call for and adjust indirect fire.
17. Write and issue combat orders.
18. Control the fire and maneuver of his assigned section.
19. Locate, close with, and destroy the enemy by fire and maneuver.
20. Repel the enemy assault by fire and close combat.
21. Capable of performing operator maintenance for, and is proficient in
employment of, all optics assigned to the rifle platoon.
22. Proficient in proper combat reporting procedures.
23. Capable of zeroing a laser aiming device, target point illuminator, and
Day/Night Sights (DNS).
24. Request close air support.
25. Integrate supporting fires in accomplishment of an assigned mission.
26. Proficient in HLZ procedures.
_______________________________________________________________________
9-13
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carry out the orders of the Platoon Commander.
2. Perform the tasks required of a 60mm Mortar Section Leader.
3. Advise the commander on the discipline, appearance, control, conduct, and
welfare of his section.
4. Train his section in the performance of tasks that support platoon and/or
company training objectives.
5. Assist the commander in conducting operational risk management.
6. Inspect the condition, care, and economical use of assigned weapons and
equipment.
7. Proficient in the employment of the weapon systems organic to his
assigned section.
8. Direct casualty collection and evacuation for his assigned section.
9. Assist the Platoon Commander with the integration of supporting fires in
accomplishment of an assigned mission.
10. Direct the supply and re-supply of his assigned section.
11. Coordinate and supervises the embarkation and debarkation of his
assigned section.
12. Perform operator maintenance for and demonstrates proficiency with the
service rifle/carbine and service pistol.
13. Engage targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
14. Emplace and recover an M18A1 Claymore mine.
15. Probe for and marks a mine.
16. Utilize smoke grenades and pyrotechnics for signaling, illumination, and
screening.
17. Determine current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
18. Perform self-aid and buddy aid.
19. Perform individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
20. Communicate using proper communications procedures with organic wired
and wireless communications.
21. Call for and adjust indirect fire.
22. Write and issue combat orders.
23. Assist the commander in controlling the fire and maneuver of his
assigned section.
24. Locate, close with, and destroy the enemy by fire and maneuver.
25. Repel the enemy assault by fire and close combat.
_______________________________________________________________________
BILLET: Section Leader, 81mm Mortar Platoon
The 81mm Mortar Section Leader is responsible for the tactical employment of
the 81mm mortar squads and carries out the orders of the Platoon Sergeant and
Platoon Commander. He is capable of performing all the tasks required of an
infantry unit leader and assumes the position of the Platoon Sergeant in his
absence. He advises the Platoon Sergeant on the discipline, appearance,
9-14
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carry out the orders of the Platoon Commander.
2. Perform the tasks required of an 81mm Mortar Section Leader.
3. Advise the commander on the discipline, appearance, control, conduct, and
welfare of his section.
4. Train his section in the performance of tasks that support platoon,
company, and battalion training objectives.
5. Assist the commander in conducting operational risk management.
6. Inspect the condition, care, and economical use of assigned weapons and
equipment.
7. Proficient in the employment of the weapon systems organic to his
assigned section.
8. Direct casualty collection and evacuation for his assigned section.
9. Assist the Platoon Commander with the integration of supporting fires in
accomplishment of an assigned mission.
10. Direct the supply and re-supply of his assigned section.
11. Coordinate and supervises the embarkation and debarkation of his
assigned section.
12. Perform operator maintenance for and is proficient with the service
rifle/carbine and service pistol.
13. Engage targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
14. Emplace and recovers an M18A1 Claymore mine.
15. Detect and mark a mine.
16. Utilize smoke grenades and pyrotechnics for signaling, illumination, and
screening.
17. Determine current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
18. Perform self-aid and buddy aid.
19. Perform individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
20. Communicate using proper communications procedures with organic wired
and wireless communications.
21. Call for and adjust indirect fire.
22. Write and issue combat orders.
23. Assist the commander in controlling the fire and maneuver of his
assigned section.
24. Locate, close with, and destroy the enemy by fire and maneuver.
25. Repel the enemy assault by fire and close combat.
_______________________________________________________________________
BILLET: Section Leader, Javelin Section, Anti-Armor Platoon
The Javelin Section Leader carries out the orders of the Platoon Commander or
unit leader. He is responsible for the discipline, appearance, training,
control, conduct, and welfare of his section at all times, as well as the
condition, care, and economical use of its weapons and equipment. He trains
his section in ground anti-armor tactics. In combat, he is also responsible
9-15
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carry out the orders of the Platoon Commander.
2. Perform the tasks required of a Javelin Section Leader.
3. Advise the commander on the discipline, appearance, control, conduct, and
welfare of his section.
4. Train his section in the performance of tasks that support platoon and/or
company training objectives.
5. Assist the commander in conducting operational risk management.
6. Inspect the condition, care, and economical use of assigned weapons and
equipment.
7. Proficient in the employment of the weapon systems organic to his
assigned section.
8. Direct casualty collection and evacuation for his assigned section.
9. Assist the Platoon Commander with the integration of supporting fires in
accomplishment of an assigned mission.
10. Direct the supply and re-supply of his assigned section.
11. Coordinate and supervises the embarkation and debarkation of his
assigned section.
12. Perform operator maintenance for and are a proficient marksman with an
M16/M4 series service rifle/carbine and M9 pistol.
13. Engage targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
14. Emplace and recover an M18A1 Claymore mine.
15. Detect and mark a mine.
16. Utilize smoke grenades and pyrotechnics for signaling, illumination, and
screening.
17. Determine current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
18. Perform self-aid and buddy aid.
19. Perform individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
20. Communicate using proper communications procedures with organic wired
and wireless communications.
21. Call for and adjust indirect fire.
22. Write and issue combat orders.
23. Assist the commander in controlling the fire and maneuver of his
assigned section.
24. Locate, close with, and destroy the enemy by fire and maneuver.
25. Repel the enemy assault by fire and close combat.
9-16
NAVMC 3500.44
16 Sep 08
armored vehicles. His rank is Staff Sergeant. His T/O weapon is the service
rifle/carbine.
Core Capabilities:
1. Carry out the orders of the Platoon Commander.
2. Perform the tasks required of an Antitank (TOW/SABER) Section Leader.
3. Advise the commander on the discipline, appearance, control, conduct, and
welfare of his section.
4. Train his section in the performance of tasks that support platoon and/or
company training objectives.
5. Assist the commander in conducting operational risk management.
6. Inspect the condition, care, and economical use of assigned weapons and
equipment.
7. Proficient in the employment of the weapon systems organic to his
assigned section.
8. Direct casualty collection and evacuation for his assigned section.
9. Assist the Platoon Commander with the integration of supporting fires in
accomplishment of an assigned mission.
10. Direct the supply and re-supply of his assigned section.
11. Coordinate and supervise the embarkation and debarkation of his assigned
section.
12. Perform operator maintenance for and is proficient with the service
rifle/carbine and service pistol.
13. Engage targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
14. Emplace and recover an M18A1 Claymore mine.
15. Detect and mark a mine.
16. Utilize smoke grenades and pyrotechnics for signaling, illumination, and
screening.
17. Determine current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
18. Perform self-aid and buddy aid.
19. Perform individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
20. Communicate using proper communications procedures with organic wired
and wireless communications.
21. Call for and adjust indirect fire.
22. Write and issue combat orders.
23. Assist the commander in controlling the fire and maneuver of his
assigned section.
24. Locate, close with, and destroy the enemy by fire and maneuver.
25. Repel the enemy assault by fire and close combat.
9-17
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carry out the orders of the Platoon Commander.
2. Perform the tasks required of a Rifle Platoon Sergeant.
3. Serve as the second-in-command of a rifle platoon.
4. Train his platoon in the performance of tasks that support platoon and/or
company training objectives.
5. Advise the commander on the discipline, appearance, control, conduct, and
welfare of his platoon.
6. Assist the commander in conducting operational risk management.
7. Inspect the condition, care, and economical use of assigned weapons and
equipment.
8. Proficient in the employment of the weapon systems organic to his
assigned platoon.
9. Direct casualty collection and evacuation for his assigned platoon.
10. Assist the Platoon Commander with the integration of supporting fires in
accomplishment of an assigned mission.
11. Direct the supply and re-supply of his assigned platoon.
12. Coordinate and supervise the embarkation and debarkation of his assigned
platoon.
13. Perform operator maintenance for and are a proficient marksman with the
service rifle/carbine and M9 pistol.
14. Engage targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
15. Emplace and recover an M18A1 Claymore mine.
16. Detect and mark a mine.
17. Utilize smoke grenades and pyrotechnics for signaling, illumination, and
screening.
18. Determine current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
19. Perform self-aid and buddy aid.
20. Performs individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
21. Communicate using proper communications procedures with organic wired
and wireless communications.
22. Call for and adjust indirect fire.
23. Write and issue combat orders.
24. Assist the commander in controlling the fire and maneuver of his
assigned platoon.
25. Locate, close with, and destroy the enemy by fire and maneuver.
26. Repel the enemy assault by fire and close combat.
9-18
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carry out the orders of the Platoon Commander.
2. Perform the tasks required of a weapons Platoon Sergeant.
3. Serve as the second-in-command of a weapons platoon.
4. Train his platoon in the performance of tasks that support platoon and/or
company training objectives.
5. Advise the commander on the discipline, appearance, control, conduct, and
welfare of his platoon.
6. Assist the commander in conducting operational risk management.
7. Inspect the condition, care, and economical use of assigned weapons and
equipment.
8. Proficient in the employment of the weapon systems organic to his
assigned platoon.
9. Direct casualty collection and evacuation for his assigned platoon.
10. Assist the Platoon Commander with the integration of supporting fires in
accomplishment of an assigned mission.
11. Direct the supply and re-supply of his assigned platoon.
12. Coordinate and supervise the embarkation and debarkation of his assigned
platoon.
13. Perform operator maintenance for, and are a proficient marksman with the
service rifle/carbine and M9 pistol.
14. Engage targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
15. Emplace and recover an M18A1 Claymore mine.
16. Detect and mark a mine.
17. Utilize smoke grenades and pyrotechnics for signaling, illumination, and
screening.
18. Determine current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
19. Perform self-aid and buddy aid.
20. Perform individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
21. Communicate using proper communications procedures with organic wired
and wireless communications.
22. Call for and adjust indirect fire.
23. Write and issue combat orders.
24. Assist the commander in controlling the fire and maneuver of his
assigned platoon.
25. Locate, close with, and destroy the enemy by fire and maneuver.
26. Repel the enemy assault by fire and close combat.
9-19
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carry out the orders of the Platoon Commander.
2. Perform the tasks required of a Heavy Machinegun Platoon Sergeant.
3. Serve as the second-in-command of a Heavy Machinegun Platoon.
4. Train his platoon in the performance of tasks that support platoon and/or
company training objectives.
5. Advise the commander on the discipline, appearance, control, conduct, and
welfare of his platoon.
6. Assist the commander in conducting operational risk management.
7. Inspect the condition, care, and economical use of assigned weapons and
equipment.
8. Proficient in the employment of the weapon systems organic to his
assigned platoon.
9. Direct casualty collection and evacuation for his assigned platoon.
10. Assist the Platoon Commander with the integration of supporting fires in
accomplishment of an assigned mission.
11. Direct the supply and re-supply of his assigned platoon.
12. Coordinate and supervise the embarkation and debarkation of his assigned
platoon.
13. Perform operator maintenance for, and is proficient with the service
rifle/carbine and service pistol.
14. Engage targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
15. Emplace and recover an M18A1 Claymore mine.
16. Detect and mark a mine.
17. Utilize smoke grenades and pyrotechnics for signaling, illumination, and
screening.
18. Determine current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
19. Perform self-aid and buddy aid.
20. Perform individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
21. Communicate using proper communications procedures with organic wired
and wireless communications.
22. Call for and adjust indirect fire.
23. Write and issue combat orders.
24. Assist the commander in controlling the fire and maneuver of his
assigned platoon.
25. Locate, close with, and destroy the enemy by fire and maneuver.
26. Repel the enemy assault by fire and close combat.
_______________________________________________________________________
BILLET: Platoon Sergeant, Anti-armor Platoon
The Platoon Sergeant, Anti-armor Platoon carries out the orders of the
Antiarmor Platoon Commander/unit leader. He performs the tasks required of a
leader in the Antitank (TOW/SABER and Javelin) Platoon and thoroughly trains
his platoon in both vehicle and ground anti-armor tactics and demolitions.
He maintains the discipline, appearance, control, and welfare of the Anti-
armor Platoon. His rank is Gunnery Sergeant. His T/O weapon is the service
rifle/carbine.
9-20
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carry out the orders of the Platoon Commander.
2. Perform the tasks required of an Antitank (TOW/SABER and Javelin) Section
Leader.
3. Advise the commander on the discipline, appearance, control, conduct, and
welfare of his section.
4. Train his platoon in the performance of tasks that support platoon and/or
company training objectives.
5. Assist the commander in conducting operational risk management.
6. Inspect the condition, care, and economical use of assigned weapons and
equipment.
7. Proficient in the employment of the weapon systems organic to his
assigned platoon.
8. Direct casualty collection and evacuation for his assigned platoon.
9. Assist the Platoon Commander with the integration of supporting fires in
accomplishment of an assigned mission.
10. Direct the supply and re-supply of his assigned platoon.
11. Coordinate and supervise the embarkation and debarkation of his assigned
platoon.
12. Perform operator maintenance for and is proficient with the service
rifle/carbine and service pistol.
13. Engage targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
14. Emplace and recover an M18A1 Claymore mine.
15. Detect and mark a mine.
16. Utilize smoke grenades and pyrotechnics for signaling, illumination, and
screening.
17. Determine current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
18. Perform self-aid and buddy aid.
19. Performs individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
20. Communicate using proper communications procedures with organic wired
and wireless communications.
21. Call for and adjust indirect fire.
22. Write and issue combat orders.
23. Assist the commander in controlling the fire and maneuver of his
assigned platoon.
24. Locate, close with, and destroy the enemy by fire and maneuver.
25. Repel the enemy assault by fire and close combat.
_______________________________________________________________________
BILLET: Company Gunnery Sergeant, Rifle Company
Carry out the orders of the rifle company commander. He advises the company
commander on the discipline, appearance, control, conduct, and welfare of the
company. He serves as the senior enlisted technical and tactical advisor to
the company commander. He coordinates and supervises the
embarkation/debarkation for deployment of the company, maintenance,
condition, and care of the companies weapons and equipment including
accountability, communication equipment, and if applicable, maintenance and
upkeep of assigned vehicles. His rank is Gunnery Sergeant. His T/O weapon
is the service rifle/carbine.
Core Capabilities:
1. Carry out the orders of the company commander.
2. Serve as the senior enlisted technical and tactical advisor to the
9-21
NAVMC 3500.44
16 Sep 08
company commander.
3. Serve as the senior enlisted technical and tactical advisor for platoon
commanders and platoon sergeant in company.
4. Coordinate training, operational, and logistical support requirements for
the company.
5. Assist the commander in conducting operation risk management.
6. Direct the supply and re-supply of his assigned company.
7. Perform the tasks required of a company gunnery sergeant.
8. Capable of performing all the tasks required of an infantry unit leader.
_______________________________________________________________________
BILLET: Operations Chief, Weapons Company
The infantry operations chief carries out the orders of the weapon company
commander or the battalion operations officer. He is capable of performing
all the tasks required of an infantry unit leader. He performs the tasks
required of the operations chief in the weapons company. The weapons company
operations chief serves as the senior enlisted technical and tactical advisor
to the weapons company commander. He advises the weapons company commander
on the discipline, appearance, control, conduct, and welfare of the company.
He trains the weapons company in the performance of tasks which support
assigned training objectives. He advises the weapons company commander on
the condition, care, and economical use of company weapons and equipment. He
coordinates and supervises the embarkation and debarkation for deployment of
Weapons Company. Weapons company operations chief supervises the actions of
personnel within the fire support coordination center. His rank is Master
Sergeant. His T/O weapon is the service rifle/carbine.
Core Capabilities:
1. Carry out the orders of the company commander.
2. Serve as the senior enlisted technical and tactical advisor to the
weapons company commander.
3. Serve as the senior enlisted technical and tactical advisor for platoon
commanders and platoon sergeant in Weapons Company.
4. Supervise and assist in the actions within the fire support coordination
center (FSC).
5. Coordinate and supervise the embarkation and debarkation for deployment
of weapons company.
6. Perform the tasks required of the operations chief in the weapons
company.
7. Capable of performing all the tasks required of an infantry unit leader.
8. Coordinate training, operational and logistical support requirements for
the weapons company.
_______________________________________________________________________
BILLET: Operations Chief, S-3 Section, Infantry Battalion/Regiment
The infantry operations chief also performs the tasks required of an
operations chief for the infantry battalion. He may serve as an operations
chief in an infantry regiment, division, Marine Expeditionary Unit, Marine
Expeditionary Brigade, Marine Expeditionary Force and Special Purpose MAGTF.
He may serve as the senior enlisted advisor to the battalion operations
officer. He advises the battalion operations officer on the discipline,
appearance, control, conduct, and welfare of the battalion operations
section. He trains his operation section in the performance of tasks which
support assigned training objectives. He advises the battalion operations
officer on the condition, care, and economical use of assigned weapons and
equipment. He coordinates and supervises the embarkation and debarkation of
the battalion operations section. He coordinates and supervises the set-up
9-22
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Serve as the senior enlisted tactical and technical advisor to the
commander and operations officers.
2. Assist the commander and operations officers on the discipline,
appearance, training, control, conduct, and welfare of the S-3 section.
3. Advise the commander and operations officers on the condition,
maintenance and economical use of the operations section’s equipment.
4. Coordinate and supervise the embarkation and debarkation of the
operations section.
5. Coordinate and supervise the set-up and displacement of the Unit
Operations Center as well as other functional areas as directed.
6. Supervise the actions of all personnel within the COC.
7. Supervise and controls section’s CMR and funding.
8. Supervise the use of Automated Data Processing (ADP) equipment and
software within the operations section.
9. Manage the flow of information provided through available C4I systems.
10. Supervise the control, dissemination and destruction of classified
information within the operations section.
12. Supervise preparation of the operational journal and journal file.
13. Establish the watch bill for the Command Operations Center.
14. Assemble and distribute operations orders.
15. Supervise the preparation and submission of messages and reports.
16. Supervise the preparation of military information briefs in support of
the operations section.
17. Supervise the maintenance of the operations sections war fighting and
training publication library.
18. Maintain the unit’s training records.
19. Assist the operations officer with the development of the unit’s
training plan.
20. Prepare training schedules and letters of instruction.
21. Supervise the request of ranges and training areas.
22. Assist the commander in the tactical employment of the organic weapons
systems for the unit.
23. Assist the commander in ensuring the establishment of a perimeter
defense, security/observation posts, or a Force Protection posture.
______________________________________________________________________
9-23
NAVMC 3500.44
16 Sep 08
9-24
NAVMC 3500.44
16 Sep 08
9-25
NAVMC 3500.44
16 Sep 08
Training
0369-TRNG-2001 Develop a unit training plan (B) 9-81
0369-TRNG-2003 Develop unit training priorities (D) 9-81
9-26
NAVMC 3500.44
16 Sep 08
GRADES: SSGT, GYSGT, MSGT, WO-1, CWO-2, 2NDLT, 1STLT, CAPT, MAJ, LTCOL, COL
PERFORMANCE STEPS:
1. Supervise local security establishment.
2. Begin planning.
3. Issue warning order.
4. Arrange for reconnaissance.
5. Coordinate with adjacent units.
6. Conduct reconnaissance.
7. Identify and mark subordinate unit primary, alternate, and supplementary
positions.
8. Assign sectors of fire for subordinate, supporting, and attached units.
9. Identify and mark command post.
10. Identify and mark occupation routes.
11. Complete the plan.
12. Conduct, coordinate, and complete the fire support/targeting process.
13. Establish trigger lines, engagement criteria, and target precedence for
all weapon systems.
14. Establish priorities of work and timeline.
15. Issue the order.
16. Supervise occupation of the defense.
17. Improve security and initiate patrolling plan.
18. Ensure automatic/crew served weapons are properly emplaced.
19. Supervise marking of sectors of fire.
20. Supervise establishment of fields of fire.
21. Supervise emplacement of obstacles.
22. Register indirect fires.
23. Update list of targets to higher.
24. Receive updated target list from higher.
25. Collect fire plan sketches and range cards from subordinate units then
refine positions.
26. Submit unit fire plan sketch.
27. Supervise entrenchment of positions.
28. Supervise implementation of communications plan.
29. Confirm counter-attack plan.
30. Rehearse defensive battle drills.
31. Supervise alert postures.
32. Supervise continuing actions.
33. Supervise position improvement and refinement.
9-27
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 90-10-1 Infantryman's Guide to Combat in Built-Up Areas
2. FMFM 6-4 Marine Rifle Company/Platoon
3. MCWP 3-11.2 Marine Rifle Squad
4. MCWP 3-15.5 Anti-armor Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17330 Covered Training Area
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17962 MOUT Collective Training Facility (Small)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This training event is not limited to live fire for 0302. If
performance steps are satisfied, this T&R event can be achieved with
training facilities such as CAST facility, sand table, TEWT, etc.
2. This includes all defensive operations, to include MOUT and counter-
mechanized.
3. Simulation may be used to supplement this task before field or live
fire training.
PERFORMANCE STEPS:
1. Task organize as required to support defensive scheme of maneuver.
2. Determine method of support.
3. Determine type of fires to be employed.
4. Determine target precedence.
5. Determine engagement criteria.
6. Ensure that machineguns are emplaced in either a Final Protective Line
(FPL) or Principle Direction of Fire (PDF).
7. Identify alternate and supplementary positions.
8. Determine displacement criteria and plan.
9. Ensure coordination is conducted with adjacent units.
10. Supervise establishment of fields of fire.
11. Supervise creation of range cards.
9-28
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17330 Covered Training Area
Facility Code 17962 MOUT Collective Training Facility (Small)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This training event is not limited to live fire for 0302. If
performance steps are satisfied, this T&R event can be achieved with
training facilities such as CAST facility, sand table, TEWT, etc.
2. If weapons platoon assets are attached, employment is directed by
attached unit commander.
3. This includes all defensive operations, to include MOUT and counter-
mechanized strong point.
4. Simulation may be used to supplement this task before field or live
fire training.
PERFORMANCE STEPS:
1. Task organize as required to support defensive scheme of maneuver.
2. Determine the method of employment.
3. Determine priority of fires.
4. Determine priority targets.
5. Position mortars to best support defense and counterattack plan.
6. Ensure coordination is conducted with adjacent units.
7. Determine and coordinate signal plan.
9-29
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. MCRP 3-15.2A Mortars
3. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17330 Covered Training Area
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This training event is not limited to live fire for 0302. If
performance steps are satisfied, this T&R event can be achieved with
training facilities such as CAST facility, sand table, TEWT, etc.
2. Simulation may be used to supplement this task before field or live
fire training.
PERFORMANCE STEPS:
1. Task organize as required to support defensive scheme of maneuver.
2. Determine type of fires to be employed.
3. Determine target precedence.
9-30
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 5-102 Countermobility
2. FM 5-250 Explosives and Demolitions
3. MCWP 3-15.5 Anti-armor Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17330 Covered Training Area
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17631 Light Antiarmor Weapons Range Live
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This training event is not limited to live fire for 0302. If
performance steps are satisfied, this T&R event can be achieved with
training facilities such as CAST facility, sand table, TEWT, etc.
2. Simulation may be used to supplement this task before field or live
fire training.
PERFORMANCE STEPS:
1. Task organize as required to support the defensive scheme of maneuver.
2. Determine type of fires to be employed.
3. Determine target precedence.
9-31
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 3-21.91 Tactical Employment of Anti-armor Platoons, Companies and
Battalions
2. MCWP 3-15.5 Antiarmor Operations
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This training event is not limited to live fire for 0302. If
performance steps are satisfied, this T&R event can be achieved with
training facilities such as CAST facility, sand table, TEWT, etc.
2. TM 09397B-12/1 Operator and Organizational maintenance Manual, JAVELIN
(CD ROM) is an additional reference.
3. Simulation may be used to supplement this task before field or live
fire training.
PERFORMANCE STEPS:
1. Receive subordinate fire plan sketches and range cards.
2. Mark map grid lines on overlay.
3. Illustrate all subordinate unit positions and crew-served weapons.
4. Illustrate sectors or fire.
5. Illustrate Principle Directions of Fire (PDFs) and Final Protective Lines
(FPLs).
6. Illustrate dead space.
7. Illustrate tactical control measures.
8. Illustrate unit command posts.
9. Illustrate targets and fire support control/coordination measures.
10. Illustrate mines, booby-traps, and obstacles.
11. Illustrate key terrain not represented on map.
9-32
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 3-25.26 Map Reading and Land Navigation
2. MCRP 3-11.1A Commander's Tactical Handbook
3. MCRP 5-12A Operational Terms and Graphics
4. MCWP 3-11.2 Marine Rifle Squad
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Consideration of distance X of direct fire weapons, line of site/IV
lines and planned indirect fires should be included.
PERFORMANCE STEPS:
1. Determine organic and non-organic fire support assets available.
2. Identify fire support control measures.
3. Plan targets on known, suspected, and likely enemy positions/avenues of
approach/avenues of withdrawal.
4. Identify priority targets.
5. Submit list of targets to higher headquarters.
6. Receive target list from higher headquarters.
7. Make changes to fire support plan.
8. Integrate fire support plan with scheme of maneuver.
9. Disseminate fire support plan.
10. Adjust the fire support plan based on METT-TSL.
9-33
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. FMFM 2-7 Fire Support in MAGTF Operations
3. FMFM 6-4 Marine Rifle Company/Platoon
4. MCRP 3-11.1A Commander's Tactical Handbook
5. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
6. MCWP 3-16.6A Supporting Arms Observer, Spotter and Controller (FMFM 6-8)
7. MCWP 3-23 Offensive Air Support
8. MCWP 3-23.1 Close Air Support
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Requirement to satisfy 3-month sustainment interval is not limited to
live fire exercises. CAST facilities, sand table and terrain models will
suffice.
2. Simulation may be used as an alternative to performing this task in the
field or live fire.
GRADES: SSGT, GYSGT, MSGT, MGYSGT, WO-1, CWO-2, 2NDLT, 1STLT, CAPT, MAJ,
LTCOL, COL
PERFORMANCE STEPS:
1. Determine fire support available.
2. Position observer(s) to best observe the target in relation to the scheme
of maneuver.
3. Determine target location.
4. Determine type of fires available.
5. Plan for integration of fires to achieve a combined arms effect.
6. Establish communications with supporting agencies.
7. Request for fires.
8. Adjust and deliver fires.
9. Transmit battle damage assessment.
10. Complete mission.
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. FMFM 2-7 Fire Support in MAGTF Operations
3. FMFM 6-18.1 Tactics, Techniques, and Procedures for the Marine Corps Fire
Support System
9-34
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
Facility Code 17671 Field Artillery Indirect Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Requirements to satisfy this 3-month sustainment interval are not
limited.
2. Simulation may be used to supplement this task before field or live
fire training.
CONDITION: Given a scenario involving a Close Air Support (CAS) strike with a
Forward Air Controller (FAC), a topographic map, compass, protractor, a
target, an attack aircraft with ordnance, and an information sheet containing:
an aircraft call sign, mission number, type ordnance load, enemy situation,
friendly situation, attack restrictions, and a radio frequency.
PERFORMANCE STEPS:
1. Determine IP/BP.
2. Determine Heading.
3. Determine Distance.
4. Determine Target Elevation.
5. Determine Target Description.
6. Determine Target Location.
7. Determine Mark Type.
REFERENCES:
1. JP 3-09 Joint Fire Support
9-35
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17330 Covered Training Area
Facility Code 17430 Impact Area Dudded
Facility Code 17936 Close Air Support Range
ROOMS/BUILDINGS:
1. Combined Arms Staff Trainer
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Terminal controller should have: (1) aircraft on correct azimuth and
(2) aircraft pointed at target prior to cleared hot call given--regardless
of platform.
2. Includes acting as FIST, terminal controller, and/or FSCC.
3. Requirements to satisfy this 6-month sustainment interval are not
limited.
CONDITION: Given a scenario involving a non standard rotary wing Close Air
Support (CAS) strike with a Forward Air Controller (FAC), a topographic map,
compass, protractor, a target, an attack aircraft with ordnance, and an
information sheet containing: an aircraft call sign, mission number, type
ordnance load, enemy situation, friendly situation, attack restrictions, and a
radio frequency,
PERFORMANCE STEPS:
1. Determine controller position.
2. Determine Direction.
3. Determine Distance.
4. Determine Target Description.
5. Determine Mark Type.
6. Determine any additional remarks necessary.
REFERENCES:
1. JP 3-09 Joint Fire Support
9-36
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17330 Covered Training Area
Facility Code 17430 Impact Area Dudded
Facility Code 17936 Close Air Support Range
ROOMS/BUILDINGS:
1. Combined Arms Staff Trainer
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Terminal controller should have: (1) aircraft on correct azimuth and
(2) aircraft pointed at target prior to cleared hot call given--regardless
of platform.
2. Includes acting as FIST, terminal controller, and/or FSCC.
3. Requirements to satisfy this 6-month sustainment interval are not
limited.
PERFORMANCE STEPS:
1. Conduct planning and preparation (to include HVI and BOLO).
2. Coordinate with adjacent, supporting, and attached units.
3. Move unit to location of vehicle/personnel checkpoint.
4. Establish search, security, and overwatch areas with appropriate stand off
distances.
5. Establish the canalization zone to force vehicles to the checkpoint.
6. Establish the turning or the deceleration zone to slow approaching
vehicles.
7. Establish criteria for escalation of force.
8. Develop a plan to communicate with local non-combatants.
9. Ensure personnel and vehicles are searched sequentially and separately.
10. Establish a secure area for Marines to eat/sleep.
11. Supervise the searching of vehicles/personnel.
12. Ensure rapid cross communication between elements.
13. Supervise the handling of detainees, when applicable.
9-37
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
2. BUST Handbook
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Plan for search of females given cultural factors.
2. If additional assets are provided such as working dogs, female Marines,
technological enhancements, ensure coordination and effective integration.
PERFORMANCE STEPS:
1. Begin planning.
2. Task-organize the unit for urban operations.
3. Coordinate with adjacent, supporting, and attached units.
4. Conduct reconnaissance.
5. Assess demographics/population factors.
6. Consider and assess rules of engagement.
7. Assess fire support, tactical control measures, routes, and urban specific
factors and restrictions.
8. Determine/coordinate key terrain labeling.
9. Conduct, coordinate, and complete the fire support/targeting process.
10. Supervise movement and tactics in the four levels of urbanized terrain.
11. Establish target precedence, consider effects for all weapon systems, and
assess collateral damage.
12. Establish the signal/marking plan.
13. Supervise appropriate pre-combat preparations, rehearsals, checks, and
inspections.
14. Initiate tactical deception, if planned.
15. Isolate the objective.
16. Control and direct organic and supporting arms (to include suppression and
obscuration fires).
17. Breach urban obstacles.
18. Gain a foothold in limited objectives.
9-38
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 90-10-1 Infantryman's Guide to Combat in Built-Up Areas
2. FMFM 6-4 Marine Rifle Company/Platoon
3. JP 3-06 Joint Doctrine for Urban Operations
4. MCRP 3-11.1A Commander's Tactical Handbook
5. MCWP 3-11.2 Marine Rifle Squad
6. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
7. X-Files 3-35.31 Urban Attack
8. X-Files 3-35.32 Urban Defense
9. X-Files 4-11.71 Urban Sustainment
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17962 MOUT Collective Training Facility (Small)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Simulation may be used to supplement this task before field or live
fire training.
PERFORMANCE STEPS:
1. Initiate reconnaissance plan.
2. Conduct planning and coordination with higher, supporting, adjacent, and
attached units.
3. Task organize the unit.
4. Establish cordon and search battle drills.
5. Issue order.
9-39
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. JP 3-07 Joint Doctrine for Military Operations Other Than War
2. MCRP 3-11.1A Commander's Tactical Handbook
3. MCRP 3-33A COUNTER GUERRILLA OPERATIONS
4. MCRP 4-11.8C Enemy Prisoners of War and Civilian Internees
5. MCWP 3-31.2 Mine Warfare
6. MCWP 3-33.5 Counterinsurgency Operations
7. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
8. MCWP 3-41.2 Raid Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17962 MOUT Collective Training Facility (Small)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Task organization for a cordon and search are the security/support
element, the command element, and the search element.
PERFORMANCE STEPS:
1. Supervise local security establishment.
2. Begin planning.
3. Issue warning order.
4. Arrange for reconnaissance.
5. Coordinate with adjacent, supporting, and attached units.
6. Make reconnaissance.
7. Confirm enemy location.
8. Confirm support by fire positions.
9. Confirm tentative ground scheme of maneuver.
9-40
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. JP 3-06 Joint Doctrine for Urban Operations
3. MCRP 3-11.1A Commander's Tactical Handbook
4. MCWP 3-11.2 Marine Rifle Squad
5. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. If performance steps are all satisfied, training can be achieved with
external support resources such as CAST facility, sand table, TEWT, etc.
2. Task can be performed as a deliberate or a hasty attack.
3. Simulation may be used to supplement this task before field or live
fire training.
9-41
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Task organize as required to support offensive scheme of maneuver.
2. Determine method of support.
3. Direct positioning of machinegun units to best observe and support scheme
of maneuver.
4. Determine target precedence.
5. Determine target reference points (TRP).
6. Plan ammunition/rates of fire relative to the attack.
7. Determine appropriate signals for commence, shift, and cease fire.
8. Determine displacement criteria and plan.
9. Ensure coordination is conducted with adjacent units.
10. Ensure security is provided for machinegun units.
11. Ensure fires commence, shift, and cease on signal to support the attack.
12. Monitor ammunition/rates of fire relative to the attack.
13. Direct positioning of machinegun units in consolidation.
14. Supervise resupply of machineguns.
15. Prepare for follow-on missions.
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. FMFM 6-3 Marine Infantry Battalion
3. FMFM 6-4 Marine Rifle Company/Platoon
4. MCWP 3-11.2 Marine Rifle Squad
5. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
6. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. If weapons platoon assets are attached, employment is directed by
attached unit commander.
2. This includes all offensive operations to include
MOUT/mechanized/fortified strong point.
3. If performance steps are satisfied, this T&R event can be achieved with
training facilities such as CAST facility, sand table, TEWT, etc.
4. Simulation may be used to supplement this task before field or live
fire training.
9-42
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Task organize as required to support the scheme of maneuver.
2. Determine the method of employment.
3. Determine the priority of fires.
4. Determine priority targets.
5. Position mortars to best support scheme of maneuver.
6. Ensure coordination is conducted with adjacent units.
7. Determine and coordinate signal plan.
8. Determine logistical requirements.
9. Integrate employment plan with external fire support assets.
10. Determine displacement criteria and plan.
11. Designate initial and subsequent firing positions.
12. Identify targets in support of movement.
13. Identify targets in support of the assault.
14. Identify targets in support of consolidation.
15. Register priority targets.
16. Register additional planned targets.
17. Ensure readiness to shoot priority targets.
18. Deconflict requests for mortar fires.
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. MCRP 3-15.2A Mortars
3. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Training event is not limited to live fire for 0302. If performance
steps are satisfied, this T&R event can be achieved with training
facilities such as CAST facility, sand table, TEWT, etc.
2. Simulation may be used as a supplement to performing this task in the
field or live fire.
9-43
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Task organize as required to support the scheme of maneuver.
2. Determine target precedence.
3. Ensure coordination is conducted with adjacent units.
4. Account for back blast area through assault unit integration in
formations.
5. Ensure integration of fires and maneuver.
6. Identify hot and cold positions, if applicable.
7. Determine displacement criteria and plan.
8. Assign other tasks in accordance with capabilities to support the offense.
9. Monitor ammunition expenditure relative to the attack.
10. Direct positioning of assault units in consolidation.
11. Supervise resupply of assault units.
12. Prepare for follow-on missions.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCWP 3-15.5 Anti-armor Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17830 Light Demolition Range
Facility Code 17631 Light Antiarmor Weapons Range Live
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Training event is not limited to live fire for 0302. If performance
steps are satisfied, this T&R event can be achieved with training
facilities such as CAST facility, sand table, TEWT, etc.
2. Simulation may be used as a supplement to performing this task in the
field or live fire.
9-44
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Task organize as required to support the scheme of maneuver.
2. Determine target precedence.
3. Ensure coordination is conducted with adjacent units.
4. Account for back blast area through integration in scheme of maneuver.
5. Ensure integration of fires and maneuver.
6. Identify hot and cold positions, if applicable.
7. Determine displacement criteria and plan.
8. Assign other tasks in accordance with capabilities to support the offense.
9. Monitor ammunition expenditure relative to the attack.
10. Direct positioning of anti-armor units in consolidation.
11. Supervise resupply of anti-armor units.
12. Prepare for follow-on missions.
REFERENCES:
1. FM 7-91 Tactical Employment of Antiarmor Platoons, Companies and
Battalions
2. FMFM 6-3 Marine Infantry Battalion
3. MCWP 3-15.5 Antiarmor Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17631 Light Antiarmor Weapons Range Live
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Training event is not limited to live fire for 0302. If performance
steps are satisfied, this T&R event can be achieved with training
facilities such as CAST facility, sand table, TEWT, etc.
2. This includes all offensive operations.
3. Simulation may be used as a supplement to performing this task in the
field or live fire.
9-45
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Task organize as required to support the scheme of maneuver.
2. Determine demolition requirements.
3. Submit request for additional support and/or material.
4. Supervise preparation of charges and construction of field expedient
demolitions.
5. Ensure integration with fires and maneuver.
6. Supervise emplacement of demolitions.
7. Direct the detonation of explosives.
8. Assess demolition effects.
9. Monitor demolition expenditure relative to the scheme of maneuver.
10. Supervise resupply of demolitions.
11. Prepare for follow-on missions.
REFERENCES:
1. FM 20-32 Mine/Countermine Operations
2. FM 23-23 Antipersonnel Mine M18A1 Claymore
3. FM 5-250 Explosives and Demolitions
4. FMFM 13-7 MAGTF Breaching Operations
5. MCRP 3-17A Engineer Field Data (FM 5-34)
6. MCWP 3-31.2 (MCRP 3-3.1 NWP 3-15) MINE WARFARE
7. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
Facility Code 17905 Mine Warfare Area
GRADES: SSGT, GYSGT, MSGT, WO-1, CWO-2, 2NDLT, 1STLT, CAPT, MAJ, LTCOL, COL
9-46
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Begin planning.
2. Analyze higher's order.
3. Conduct METT-TSL.
4. Analyze civilian considerations, as appropriate (Areas, Structures,
Capabilities, Organizations, Personnel, Events - ASCOPE).
5. Determine task organization.
6. Consider time line.
7. Develop the situation paragraph.
8. Develop the mission.
9. Develop the tentative scheme of maneuver.
10. Develop coordinating instructions.
11. Develop special instructions to subordinate leaders, special purpose
teams, and/or key individuals.
12. Develop remaining elements of the operations order, time and information
permitting.
13. Designate orders group.
14. Post or brief warning order.
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCIP 3-33.01 Small Unit Leader's Guide to Counterinsurgency
3. MCRP 3-11.1A Commander's Tactical Handbook
4. MCWP 3-11.2 Marine Rifle Squad
5. MCWP 3-11.3 Scouting and Patrolling
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Warning orders are applicable but not limited to combat or training.
GRADES: SSGT, GYSGT, MSGT, MGYSGT, WO-1, CWO-2, 2NDLT, 1STLT, CAPT, MAJ,
LTCOL, COL
PERFORMANCE STEPS:
1. Begin planning.
2. Analyze higher's order.
3. Conduct METT-TSL.
9-47
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCRP 3-11.1A Commander's Tactical Handbook
3. MCRP 5-12A Operational Terms and Graphics
4. MCWP 3-11.2 Marine Rifle Squad
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Subordinate unit leaders have to clearly understand their specified
tasks, implied tasks, distribution of labor, and priority of work.
2. While difficult to measure, the delivery of orders should also inspire
subordinate confidence in the plan and should be evaluated subjectively.
3. Distance learning courseware supports the development of the order.
9-48
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Begin planning.
2. Determine convoy task organization.
3. Issue warning order.
4. Coordinate with adjacent, supporting, and attached units.
5. Conduct intelligence preparation/route reconnaissance.
6. Establish tactical control measures and routes.
7. Establish convoy battle drills.
8. Establish bump plan.
9. Complete the planning relative to critical convoy factors.
10. Conduct, coordinate, and complete the fire support plan.
11. Establish target precedence and engagement criteria for all weapon
systems.
12. Establish priorities or rehearsal and timeline.
13. Establish the signal plan.
14. Issue convoy movement order to subordinate and attached leaders, vehicle
commanders, and gunners.
15. Supervise occupation of assembly area.
16. Supervise appropriate pre-combat preparations, rehearsals, checks, and
inspections.
17. Coordinate and conduct movement at specified times and along specified
routes.
18. Report crossing of tactical control measures.
19. Employ the convoy battle drill for a given situation.
20. Maintain situational awareness of units and factors relative to the
movement.
21. Receive and send required reports.
22. Supervise execution of the mission.
23. Conduct debrief.
REFERENCES:
1. FM 3-25.26 Map Reading and Land Navigation
2. FM 5-170 Engineer Reconnaissance
3. FMFRP 4-19 Vehicle Recovery Operations
4. MCRP 3-11.1A Commander's Tactical Handbook
5. MCRP 4-11.3F Convoy Operations Handbook
6. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
7. MCWP 3-16.6A Supporting Arms Observer, Spotter and Controller (FMFM 6-8)
8. MCWP 3-23.1 Close Air Support
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Convoy operations are not limited to combat. Administrative movements,
movements in CONUS, and any other significant motorized travel are
applicable.
2. Critical convoy factors include but are not limited to: escalation of
force, rules of engagement, primary and alternate routes, order of
9-49
NAVMC 3500.44
16 Sep 08
GRADES: SSGT, GYSGT, WO-1, CWO-2, 2NDLT, 1STLT, CAPT, MAJ, LTCOL, COL
PERFORMANCE STEPS:
1. Determine areas from the previous order that have changed.
2. Update situation and provide required additional information.
3. Communicate the order.
4. Receive brief backs/confirmation briefs to ensure appropriate actions.
5. Supervise preparation and execution.
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCRP 3-11.1A Commander's Tactical Handbook
3. MCRP 5-12A Operational Terms and Graphics
4. MCWP 3-11.2 Marine Rifle Squad
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Subordinate unit leaders have to clearly understand the change to the
situation and the relevant changes to the base order.
2. Communication of the order may be via messenger, radio, verbally, or in
writing.
3. Constraints of time, communications, and proximity to subordinate units
will significantly impact the delivery and content of the fragmentary order
as well as the nature of brief backs and confirmation briefs.
9-50
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Begin planning.
2. Determine patrol task organization.
3. Issue warning order.
4. Coordinate with adjacent, supporting, and attached units.
5. Conduct intelligence preparation/route reconnaissance.
6. Establish routes (primary and alternate) and tactical control measures.
7. Establish patrol battle drills.
8. Establish patrol base plan, if applicable.
9. Complete the planning relative to critical patrol factors.
10. Conduct, coordinate, and complete the fire support plan.
11. Establish target precedence and engagement criteria for all weapon
systems.
12. Establish priorities of rehearsal and timeline.
13. Establish the signal plan.
14. Issue patrol order to subordinate and attached leaders, specialized teams,
and personnel.
15. Supervise occupation of assembly area.
16. Supervise appropriate pre-combat preparations, rehearsals, checks, and
inspections.
17. Conduct forward unit coordination.
18. Depart friendly lines/insert into patrolling area.
19. Coordinate and conduct movement at specified times and along specified
routes.
20. Employ the patrol battle drill for a given situation.
21. Maintain situational awareness of units and factors relative to the
patrol.
22. Conduct directed actions during patrol.
23. Control and direct organic and supporting arms.
24. Complete actions on the objective/mission requirements.
25. Receive and send required reports.
26. Supervise execution of the mission.
27. Conduct re-entry of friendly lines/extract from patrolling area.
28. Conduct patrol debrief.
RELATED EVENTS:
0302-OFF-1208 0302-OFF-1207
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-11.2 Marine Rifle Squad
3. MCWP 3-11.3 Scouting and Patrolling
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
9-51
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Training event is not limited to live fire for 0302. If performance
steps are satisfied, this T&R event can be achieved with training
facilities such as CAST facility, sand table, TEWT, etc.
2. Simulation may be used as a supplement to performing this task in the
field or live fire.
GRADES: SSGT, GYSGT, MSGT, MGYSGT, WO-1, CWO-2, 2NDLT, 1STLT, CAPT, MAJ,
LTCOL, COL
PERFORMANCE STEPS:
1. Apply ORM principles.
2. Identify hazards.
3. Assess hazards.
4. Develop controls and make risk decisions.
5. Implement controls.
6. Supervise and evaluate.
7. Integrate ORM into all activities.
REFERENCES:
1. MCO 3500.27B Operational Risk Management (ORM) (May 04)
2. MCRP 5-12.1C Risk Management (Feb 01)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. ORM applies to any event from combat, live fire training,
administrative movement, travel, on leave or liberty, etc.
9-52
NAVMC 3500.44
16 Sep 08
CONDITION: Given a High Frequency (HF) radio, a frequency or net ID, and a
distant station.
PERFORMANCE STEPS:
1. Inspect radio and components.
2. Assemble components.
3. Connect to a power source (Batteries/vehicle).
4. Operate controls and indicators (net IDs, frequency, time, etc.).
5. Communicate with a distant station.
6. Maintain radio and components.
7. Troubleshoot as required.
8. Remove power source.
9. Disassemble components.
10. Inspect radio and components.
REFERENCES:
1. MCRP 6-22C RADIO OPERATOR'S HANDBOOK
PERFORMANCE STEPS:
1. Inspect radio/device and components.
2. Assemble components.
3. Connect to a power source (Batteries/vehicle).
4. Operate controls and indicators (fills, net IDs, frequency, time, etc.).
5. Communicate with a distant station.
6. Troubleshoot as required
7. Maintain radio and components.
8. Remove power source.
9. Disassemble components.
10. Inspect radio/device and components.
REFERENCES:
1. MCRP 6-22C RADIO OPERATOR'S HANDBOOK
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Current Technical Manuals are not available. Specific technical
information can be obtained through the manufacturer.
9-53
NAVMC 3500.44
16 Sep 08
2. This task is designed for D-DACT and Blue Force Tracker or other SATCOM
equipment designated for the platoon or higher operational level.
PERFORMANCE STEPS:
1. Conduct planning and preparation.
2. Determine method of support and tentative primary defensive positions.
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Simulation may be used to supplement this task before field or live
fire training.
9-54
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Conduct planning and preparation.
2. Select method of support and tentative primary defensive positions.
3. Select type of fires to be employed, target precedence, and engagement
criteria.
4. Coordinate employment of anti-armor unit to assist in construction of
obstacles.
5. Emplace anti-armor unit to best support the defense.
6. Designate firing positions.
7. Ensure coordination is conducted with adjacent units.
8. Supervise the rehearsal of movement to and from hot and cold positions.
9. Supervise displacement.
10. Compile completed range cards and ensure integration of fires, in
accordance with defensive plan.
11. Supervise delivery of fires for the defense and counterattack.
REFERENCES:
1. FM 7-91 Tactical Employment of Antiarmor Platoons, Companies and
Battalions
2. MCWP 3-15.5 Anti-armor Operations
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Simulation may be used to supplement this task before field or live
fire training.
9-55
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Conduct planning and preparation.
2. Select method of support and tentative primary defensive positions.
3. Select type of fires to be employed, target precedence, and engagement
criteria.
4. Assign other tasks in accordance with capabilities to support the defense.
5. Emplace assault units to best support the defense.
6. Identify hot and cold positions.
7. Identify alternate and supplementary positions.
8. Ensure coordination is conducted with adjacent units.
9. Supervise the rehearsal of movement to and from hot and cold positions.
10. Supervise displacement.
11. Compile completed range cards and ensure integration of fires, in
accordance with defensive plan.
12. Supervise delivery of fires for the defense and counterattack.
REFERENCES:
1. FM 5-102 Countermobility
2. MCWP 3-15.5 Anti-armor Operations
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Simulation may be used to supplement this task before field or live
fire training.
9-56
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Conduct planning and preparation.
2. Select method of employment, priority targets, priority of fires,
tentative primary firing position, signals, and logistics.
3. Integrate employment plan with external fire support assets.
4. Coordinate mortar positioning to best support defense and counterattack
plan.
5. Emplace security.
6. Ensure 360 degrees of fire support.
7. Ensure mortars register.
8. Identify Final Protective Fire (FPF) location.
9. Supervise FPF registration.
10. Register additional planned targets, time and ammunition permitting.
11. Anticipate and plan resupply requirements.
12. Ensure coordination is conducted with adjacent units.
13. Execute signal plan.
14. Coordinate and supervise displacement.
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. MCRP 3-15.2A Mortars
3. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Simulation may be used to supplement this task before field of live
fire training.
PERFORMANCE STEPS:
1. Advise commander on sniper employment considerations.
2. Receive the commander's order.
3. Suggest recommendations/modifications for sniper employment.
9-57
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
PERFORMANCE STEPS:
1. Conduct planning and preparation.
2. Coordinate method of support.
3. Direct positioning of machinegun units to best observe and support scheme
of maneuver.
4. Establish target precedence.
5. Coordinate target reference points (TRP).
6. Plan ammunition/rates of fire relative to the attack.
7. Supervise signal plan.
8. Supervise displacement.
9. Ensure coordination is conducted with adjacent units.
10. Ensure security is provided for machinegun unit.
11. Ensure fires commence, shift, and cease on signal to support the attack.
12. Monitor ammunition/rates of fire relative to the attack.
13. Direct positioning of machinegun units in consolidation.
14. Supervise resupply of machineguns.
15. Prepare for follow-on missions.
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
9-58
NAVMC 3500.44
16 Sep 08
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Simulation may be used to supplement this task before field or live
fire training.
PERFORMANCE STEPS:
1. Conduct planning and preparation.
2. Establish target precedence.
3. Ensure coordination is conducted with adjacent units.
4. Ensure integration of fires and maneuver.
5. Identify hot and cold positions, if applicable.
6. Supervise displacement.
7. Assign other tasks in accordance with capabilities to support the offense.
8. Monitor ammunition expenditure relative to the attack.
9. Supervise positioning of anti-armor units in consolidation.
10. Supervise resupply of anti-armor units.
11. Prepare for follow-on missions.
REFERENCES:
1. FM 7-91 Tactical Employment of Antiarmor Platoons, Companies and
Battalions
2. MCWP 3-15.5 Anti-armor Operations
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Simulation may be used to supplement this task before field or live
fire training.
9-59
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Conduct planning and preparation.
2. Determine target precedence.
3. Identify breaching and demolitions requirements.
4. Ensure coordination is conducted with adjacent units.
5. Ensure integration of fires, demolitions, breaching, and maneuver.
6. Identify hot and cold positions, if applicable.
7. Determine displacement criteria and plan.
8. Assign other tasks in accordance with capabilities to support the offense.
9. Monitor ammunition expenditure relative to the attack.
10. Direct positioning of assault units in consolidation.
11. Supervise resupply of assault units.
12. Prepare for follow-on missions.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. FMFM 6-4 Marine Rifle Company/Platoon
3. MCWP 3-15.5 Anti-armor Operations
4. TM 013750-13&P Operators Manual MK-7 MOD 1 Anti-Personnel Obstacle
Breaching System (APOBS)
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Breaching includes mechanical and explosive breaching of obstacles,
walls, doors, etc.
2. Simulation may be used to supplement this task before field or live
fire training.
9-60
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Conduct planning and preparation.
2. Determine the method of employment.
3. Supervise priority of fires.
4. Coordinate positioning of mortars to best support scheme of maneuver.
5. Ensure coordination is conducted with adjacent units.
6. Supervise signal plan.
7. Supervise resupply of mortar unit.
8. Supervise displacement.
9. Coordinate subsequent firing positions.
10. Identify targets in support of movement.
11. Identify targets in support of the assault.
12. Identify targets in support of consolidation.
13. Supervise registration of priority targets.
14. Supervise registration of additional planned targets.
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. MCRP 3-15.2A Mortars
3. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Simulation may be used to supplement this task before field or live
fire training.
9-61
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Advise commander on sniper employment considerations.
2. Receive the commander's order.
3. Suggest recommendations/modifications for sniper employment.
4. Coordinate and prepare.
5. Brief mission.
6. Execute mission.
7. Make reports, as required.
8. Debrief mission.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
GRADES: SSGT
CONDITION: Given an 81mm mortar platoon Fire Direction Center (FDC) and an
observed Call for Fire (CFF).
PERFORMANCE STEPS:
1. Monitor the Call For Fire (CFF).
2. Determine method of engagement.
3. Supervise computations of corrections.
4. Monitor fire commands.
5. Supervise the maintenance of record for all fire missions.
6. Coordinate with the Fire Support Coordination Center (FSCC), as required.
7. Monitor the Message to Observer (MTO).
REFERENCES:
1. MCRP 3-15.2A Mortars
2. MCRP 3-15.2B Mortar Gunnery
9-62
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Construct the matrix.
2. Allocate fires and fire support tasks according to the scheme of maneuver
and the fire support plan.
3. Disseminate the completed matrix to all Fire Support Teams (FST), Fire
Support Coordination Centers (FSCC), firing agencies, and other pertinent
units.
4. Monitor the operation to ensure the plan in the matrix is implemented
correctly and updated, as necessary.
REFERENCES:
1. MCRP 3-16A Tactics, Techniques, and Procedures for the Targeting Process
2. MCRP 3-16C Tactics, Techniques, and Procedures for Fire Support for the
Combined Arms Commander
3. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
4. MCWP 3-16.1 Artillery Operations
5. MCWP 3-16.4 Tactics, Techniques and Procedures for the Field Artillery
Manual Cannon Gunnery
6. MCWP 3-23 Offensive Air Support
7. MCWP 3-23.1 Close Air Support
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Live fire is not required to satisfy sustainment interval.
2. Formal school training is available and recommended to train this task
to standard via the Expeditionary Warfare Training Groups.
9-63
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Identify targets that support the scheme of maneuver and fire support plan
using PLOTCR (Purpose, Location, Observer, Target information,
Communication link/Controller, Requirements).
2. Plot targets on an overlay, identifying opportunities for multiple target
engagements.
3. Prepare and submit a target list worksheet.
4. Prepare a scheduling worksheet.
5. Disseminate the completed worksheets to all Fire Support Teams (FST) and
other pertinent units.
6. Monitor the operation to ensure the target list and scheduling worksheets
are executed properly and updated, as necessary.
REFERENCES:
1. FM 6-20-40 FIRE SUPPORT FOR BRIGADE OPERATIONS (HEAVY)
2. MCRP 5-12A Operational Terms and Graphics
3. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Live fire is not required to satisfy sustainment interval.
2. Formal school training is available and recommended to train this task
to standard via the Expeditionary Warfare Training Groups.
9-64
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Determine the target description.
2. Determine the target grid location and elevation.
3. Request CAS mission.
4. Make initial contact with aircraft and provide required identification.
5. Receive initial contact from aircraft.
6. Submit initial point or attack position to the aircraft.
7. Submit heading and offset to the aircraft.
8. Submit distance to the aircraft.
9. Submit target elevation to the aircraft.
10. Submit target description to the aircraft.
11. Submit the grid location of the target to the aircraft.
12. Submit the type of mark to the target.
13. Submit the location of friendly forces to the aircraft.
14. Submit the egress to the aircraft.
15. Submit the desired time for ordnance to impact the target in minutes
and/or seconds to the aircraft followed by the word "Hack."
16. Receive acknowledgement of the hack from the aircraft.
17. Submit acknowledgement of the marking round.
18. Submit adjustments to the aircraft in cardinal direction and distance from
the marking round to the target.
19. Submit the percent of ordnance on target and/or the percent of target
destroyed to the aircraft.
RELATED EVENTS:
0302-FSPT-1303 0302-FSPT-1304
REFERENCES:
1. JP 3-09 Joint Fire Support
2. JP 3-09.3 Control of Aircraft and Missile Joint Tactics, Techniques and
Procedures for Close Air Support
3. MCRP 3-16.2 Techniques and Procedures for Fire Support Coordination
4. MCWP 3-23.1 Close Air Support
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17936 Close Air Support Range
Facility Code 17330 Covered Training Area
ROOMS/BUILDINGS:
1. Combined Arms Staff Trainer
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Terminal controller should have: (1) aircraft on correct azimuth, (2)
aircraft pointed at target prior to cleared hot call given--regardless of
platform.
9-65
NAVMC 3500.44
16 Sep 08
STANDARD: To graphically depict the fire support plan that compliments the
scheme of maneuver.
PERFORMANCE STEPS:
1. Orient the overlay to the area of operation.
2. Place register marks on the overlay.
3. Plot targets on overlay.
4. Plot Coordinate Firing Line (CFL).
5. Plot Fire Support Coordination Line (FSCL).
6. Plot Battlespace Coordination Line (BCL).
7. Plot Free Fire Areas (FFA).
8. Plot Restrictive Fire Line (RFL).
9. Plot No Fire Areas (NFA).
10. Plot Restrictive Fire Areas (RFA).
11. Plot Air-Space Coordination Area (ACA).
12. Plot Target Area of Interest (TAI).
13. Plot Fire Support Areas (FSA).
14. Plot Target Reference Point (TRP).
15. Submit overlay to Fire Support Coordinator for approval.
16. Distribute copies of overlay as required.
REFERENCES:
1. FM 3-25.26 Map Reading and Land Navigation
2. MCRP 3-16C Tactics, Techniques, and Procedures for Fire Support for the
Combined Arms Commander
3. MCRP 5-12A Operational Terms and Graphics
4. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
9-66
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Obtain the commander's guidance.
2. Complete DA Form 5368-R heading.
3. Issue situation report and warning order to the appropriate Fire Support
Coordination Centers (FSCCs) and firing units.
4. Collect information on the availability and status of mortars, field
artillery (FA), naval surface fire support (NSFS), and close air support
(CAS), in support of the mission.
5. Select targets.
6. Obtain commander's approval of the targets.
7. Complete and transmit the target list portion of DA Form 5368-R.
8. Schedule targets on DA Form 5368-R.
9. Transmit the schedules to the firing units.
10. Brief the observers.
11. Report to the commander when the firing units are ready.
12. Amend the plan based on the situation and the commander's desires.
REFERENCES:
1. FM 6-20-40 FIRE SUPPORT FOR BRIGADE OPERATIONS (HEAVY)
2. FM 6-20-50 Fire Support for Brigade Operations (Light)
3. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
0302-OPS-2101: Employ company organic direct and indirect fire weapons (B)
CONDITION: Given a unit, the scheme of maneuver, and the commander's intent.
9-67
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Task organize as required to support the scheme of maneuver.
2. Determine the method of employment.
3. Determine the type of fires required.
4. Determine desired effects of weapon systems.
5. Establish target precedence for all weapon systems.
6. Determine engagement criteria.
7. Ensure combined arms integration.
8. Integrate employment plan with external fire support assets.
9. Determine fire support and tactical control measures.
10. Coordinate positioning of direct and indirect fire weapons.
11. Determine firing tasks.
12. Determine priority of fires.
13. Determine ammunition expenditure/rates of fire relative to the scheme of
maneuver.
14. Conduct, coordinate, and complete the fire support/targeting process.
15. Establish priorities of rehearsal and timeline.
16. Determine priority targets.
17. Ensure coordination is conducted with adjacent units.
18. Determine and coordinate signal plan.
19. Determine logistical requirements.
20. Determine displacement criteria and plan.
21. Disseminate the plan.
22. Register fires/targets, as appropriate.
23. Update the plan as required.
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. FMFM 6-18.1 Tactics, Techniques, and Procedures for the Marine Corps Fire
Support System
3. FMFM 6-4 Marine Rifle Company/Platoon
4. IP 2-31 Infantry Mortars
5. IP 2-32 Anti-mechanized Weapons
6. MCRP 3-15.2A Mortars
7. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
8. MCWP 3-15.5 Anti-armor Operations
9. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
Facility Code 17710 Multipurpose Training Range (MPTR)
MISCELLANEOUS:
9-68
NAVMC 3500.44
16 Sep 08
ADMINISTRATIVE INSTRUCTIONS:
1. Consideration of distance X direct fire weapons, line of sight/IV
lines, mitigation of distance X, dead space, and proper Intelligence
Preparation of the Battlefield (IPB) should be considered.
2. Integration of weapons systems does not require live fire. CAST
facilities, sand tables, map exercises, blank fire and TEWTs will satisfy.
3. Simulation may be used as a supplement to this task before going to the
field or conducting live fire training.
GRADES: SSGT, GYSGT, MSGT, 2NDLT, 1STLT, CAPT, MAJ, LTCOL, COL
STANDARD: To ensure the unit can logistically support the scheme of maneuver.
PERFORMANCE STEPS:
1. Begin detailed logistics planning upon receipt of higher headquarters
order.
2. Identify actual, forecasted, and potential shortages in supplies and
operational equipment.
3. Consolidate subordinate unit resupply requests.
4. Submit requests early in planning in order to not impair current or future
operations.
5. Coordinate link-up point, resupply point(s), distribution point(s), and
storage point(s) for equipment and ammunition.
6. Designate a security element and a recovery and distribution element.
7. Ensure supplies are tactically distributed, while maintaining security.
8. Continue with assigned mission.
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. FMFM 6-4 Marine Rifle Company/Platoon
3. MCWP 3-11.2 Marine Rifle Squad
4. MCWP 4-11 Tactical Level Logistics
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. If performance steps are satisfied, this T&R event can be achieved with
training facilities such as CAST facility, sand table, TEWT, etc.
2. 0302 is ultimately responsible for the success and failure of the unit
to include all classes of logistics. Platoon guides, platoon sergeant,
company gunnery sergeant and BN S-4 are a means to satisfy, but 0302 is
overall accountable.
9-69
NAVMC 3500.44
16 Sep 08
0302-OPS-2103: Employ battalion organic direct and indirect fire weapons (B)
CONDITION: Given a unit, the scheme of maneuver, and the commander's intent.
PERFORMANCE STEPS:
1. Task organize as required to support the scheme of maneuver.
2. Determine the method of employment.
3. Determine the type of fires required.
4. Determine desired effects of weapon systems.
5. Establish target precedence for all weapon systems.
6. Determine engagement criteria.
7. Ensure combined arms integration.
8. Integrate employment plan with external fire support assets.
9. Determine fire support and tactical control measures.
10. Coordinate positioning of direct and indirect fire weapons.
11. Determine firing tasks.
12. Determine priority of fires.
13. Determine ammunition expenditure/rates of fire relative to the scheme of
maneuver.
14. Conduct, coordinate, and complete the fire support/targeting process.
15. Establish priorities of rehearsal and timeline.
16. Determine priority targets.
17. Ensure coordination is conducted with adjacent units.
18. Determine and coordinate signal plan.
19. Determine logistical requirements.
20. Determine displacement criteria and plan.
21. Disseminate the plan.
22. Register fires/targets, as appropriate.
23. Update the plan as required.
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. FMFM 6-18.1 Tactics, Techniques, and Procedures for the Marine Corps Fire
Support System
3. FMFM 6-4 Marine Rifle Company/Platoon
4. IP 2-31 Infantry Mortars
5. IP 2-32 Anti-mechanized Weapons
6. MCRP 3-15.2A Mortars
7. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
8. MCWP 3-15.5 Anti-armor Operations
9. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
9-70
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17670 Mortar Range
Facility Code 17430 Impact Area Dudded
Facility Code 17710 Multipurpose Training Range (MPTR)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Consideration of distance X direct fire weapons, line of sight/IV
lines, mitigation of distance X, dead space, and proper Intelligence
Preparation of the Battlefield (IPB) should be considered.
2. Integration of weapons systems does not require live fire. CAST
facilities, sand tables, map exercises, blank fire and TEWTs will satisfy.
3. Simulation may be used as a supplement to this task before going to the
field or conducting live fire training.
PERFORMANCE STEPS:
1. Task organize as required to support the scheme of maneuver.
2. Determine the type of fires required.
3. Determine desired effects of weapon systems.
4. Establish target precedence for firing agencies.
5. Complete the attack guidance matrix.
6. Develop the fire support execution matrix.
7. Ensure combined arms integration.
8. Prepare a fire support coordination overlay.
9. Integrate employment plan with external fire support assets.
10. Determine fire support control/coordination measures.
11. Track positioning of indirect fire weapons.
12. Track positioning of friendly units.
13. Determine priority of fires.
14. Determine ammunition expenditure relative to the scheme of maneuver.
15. Conduct, coordinate, and complete the fire support/targeting process.
9-71
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCRP 3-16.2 Techniques and Procedures for Fire Support Coordination
2. MCRP 3-16.6A J-Fire, Multiservice Procedures for the Joint Application of
Fire Power
3. MCRP 5-12A Operational Terms and Graphics
4. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
5. MCWP 3-16C Tactics, Techniques, and Procedures for the Targeting Process
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Supervision of the FSCC is not limited to live fire. CAST facilities,
sand table exercises, and non-live fire BN operations will suffice.
PERFORMANCE STEPS:
1. Supervise current operations and initiate appropriate action.
2. Provide command and control of all subordinate units.
9-72
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. FMFM 6-4 Marine Rifle Company/Platoon
SUPPORT REQUIREMENTS:
GRADES: GYSGT, MSGT, MGYSGT, WO-1, CWO-2, CAPT, MAJ, LTCOL, COL
PERFORMANCE STEPS:
1. Perform the mission analysis.
2. Develop courses of action.
3. War game courses of action.
4. Compare courses of action, then present for commander's decision.
5. Develop orders.
6. Transition to produce operations plan or order.
7. Develop branches and or sequels, if applicable.
9-73
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCDP 5 Planning
2. MCO 3120.9 Policy for Marine Expeditionary Unit
3. MCWP 5-1 Marine Corps Planning Process
4. NAVMC DIR 3000.18 Marine Corps Force Deployment Planning and Execution
Process Manual
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Given specific restrictions with regard to time available and
situation, commander may decide to conduct rapid staff planning rather then
MCPP.
2. NAVMC DIR 3000.18 describes Marine Corps responsibilities in the Joint
Operations Planning and Execution System.
PERFORMANCE STEPS:
1. Analyze Higher Headquarters Mission Essential Task List (METL) in order to
determine subordinate units' tasks.
2. Develop tasks from higher headquarters METL into subordinate units' METs.
3. Develop training plan that supports subordinate units' METs.
4. Determine and procure requirements that support the training plan (i.e.
range/facility, ammunition, ammunition transportation, communication,
personnel, transportation, chow, water, admin/morning report/orders, and
dunnage).
5. Execute training, evaluation, and remediation.
6. Recover unit and equipment from training.
REFERENCES:
1. MCO 1553.1B The Marine Corps Training and Education System (May 91)
2. MCRP 3-0A Unit Training Management Guide (Nov 96)
3. MCRP 3-0B How to Conduct Training (Nov 96)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Determining mission requirements is a continual process that occurs at
every level of command. Close and continual liaison among training
9-74
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Submit training scheme of maneuver.
2. Submit operational risk assessment for risk decision authority approval.
3. Conduct confirmation brief.
4. Designate and prepare the Range Safety Officer (RSO).
5. Draw range/training area.
6. Receive, store, and secure ammunition on the range.
7. Supervise RSO duties.
8. Supervise execution of training.
9. Supervise unexpended ammunition return.
10. Conduct training after action review (AAR) with RSO and key training
personnel.
11. Submit operational risk assessment effectiveness.
12. Submit training AAR.
RELATED EVENTS:
0302-TRNG-2204
REFERENCES:
1. MCO 3570.1B Range Safety (Jun 03)
2. MCRP 3-0A Unit Training Management Guide (Nov 96)
3. MCRP 3-0B How to Conduct Training (Nov 96)
4. MCRP 3-11.1A Commander's Tactical Handbook
5. MCRP 3-11.2A Marine Troop Leader's Guide
6. MCRP 5-12.1C Risk Management (Feb 01)
7. USMC Range Safety Pocket Guide
8. Unit Standard Operating Procedures (SOP)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Reference appropriate Training and Readiness Manual as required.
2. Each base/installation (if applicable) has separate qualification
standards. Both will be satisfied prior to serving as OIC.
9-75
NAVMC 3500.44
16 Sep 08
GRADES: SSGT, GYSGT, MSGT, MGYSGT, CWO-2, CWO-3, 2NDLT, 1STLT, CAPT, MAJ,
LTCOL, COL
PERFORMANCE STEPS:
1. Determine the collective tasks to be trained from the company quarterly
training plan.
2. Review the selected collective tasks to determine required resources and
the most appropriate method(s) for delivering instruction.
3. Request the required resources from higher headquarters.
4. Prepare a training schedule that explains how the training will be
conducted.
5. Assign principal trainers.
6. Brief squad leaders on training events.
7. Allocate time to squad leaders for training individual tasks that
compliment the collective tasks selected.
8. Evaluate squad training and provide feedback/mentorship.
9. Participate in platoon collective tasks training.
10. Remediate squads that have not mastered the training standard.
11. Conduct after action reviews after each training event scheduled.
12. Submit a training after action report to higher headquarters.
13. Update individual training records.
REFERENCES:
1. FM 25-10 Leaders Guide to Lane Training
2. MCO 3500.27B Operational Risk Management (ORM) (May 04)
3. MCRP 3-0B How to Conduct Training (Nov 96)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Related events:
MCCS-T3-2103
URP-IMPI-2024
9-76
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Ensure all range flags are up and red lights are set.
2. Ensure gates are secured or manned, if necessary.
3. Read unit and base Standard Operating Procedure (SOP).
4. Ensure all targets are set up.
5. Establish solid/dual communication with range control via radio.
6. Assign personnel to prepare ammo for issue for all relays.
7. Determine rounds per shooter.
8. Ensure the range perimeters are within the Surface Danger Zone (SDZ).
9. Ensure the targets are in correct locations; spot check.
10. Ensure firing lines are in the correct location.
11. Ensure ammo issue point is in the correct location.
12. Ensure medical personnel and vehicle is in the correct location.
13. Count off and assign relays, if necessary.
14. Conduct a complete safety check to include clearing stock weapons.
15. Ensure preparation of weapons for firing.
16. Read all local range regulations before firing.
17. Brief the course of fire.
18. Brief the conduct of fire.
19. Brief the medical emergency plan.
20. Brief the range-specific environmental policies and issues.
21. Read the local safety brief.
22. Brief road guard positions, if required.
23. Ensure road guards are positioned in pairs, if applicable.
24. Ensure that shooters are wearing all required personal protective
equipment.
25. Conduct radio checks.
26. Request hot status.
27. Unload, show-clear all weapons.
28. Call in cold,
29. Take down range flags.
30. Submit ammunition expenditure report.
31. Turn in range.
RELATED EVENTS:
0302-TRNG-2202
REFERENCES:
1. MCO 3570.1B Range Safety (Jun 03)
2. MCRP 3-0A Unit Training Management Guide (Nov 96)
3. MCRP 3-0B How to Conduct Training (Nov 96)
4. MCRP 3-11.1A Commander's Tactical Handbook
5. MCRP 3-11.2A Marine Troop Leader's Guide
6. MCRP 5-12.1C Risk Management (Feb 01)
9-77
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. DODIC and weapons as required.
2. Each base/installation (if applicable) has separate RSO qualification
standards. Both will be satisfied prior to serving as RSO.
STANDARD: To accomplish goals of the training event and meet the commander's
intent.
PERFORMANCE STEPS:
1. Analyze the event.
2. Determine tasks
3. Determine resources required.
4. Develop using 5-paragraph order format.
5. Publish LOI.
REFERENCES:
1. MCRP 3-0A Unit Training Management Guide (Nov 96)
2. Unit Standard Operating Procedures (SOP)
GRADES: MSGT
9-78
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Obtain the commander's concept of fire support and develop, with the
commander and operations officer, the overall fire support plan.
2. Supervise and coordinate the development of the supporting arms plans to
execute the overall fire support tasks.
3. Supervise the preparation of fire plans by resolving conflicts regarding
selection of targets, assignment of fire support means, type and method of
fire supporting, and timing or scheduling of missions or fires.
4. Review fire plans to ensure they can be implemented with the fire support
means available and, if necessary, coordinate with the operations officer
and commander to secure additional means or to modify plans.
5. Ensure chemical and conventional fires are fully coordinated.
6. Ensure unnecessary duplication of fires is eliminated.
7. Ensure plans of the various supporting arms are coordinated.
8. Ensure adequate fires are planned on targets and critical areas.
9. Ensure efficient use is made of all supporting arms.
10. Present the fire support plan to the commander.
11. Assist supporting arms representatives in selection of coordination
measures, and recommends them to the commander for approval.
12. Approve and institute airspace coordination areas and any plans for
trajectory limitations to ensure the safety of aircraft and the
coordination of the other supporting arms with air operations.
13. Obtain clearance and coordinate strikes or missions of supporting arms
that might endanger or hinder the operations of an element of the
amphibious task force.
14. Ensure the Fire Support Coordination Center (FSCC) receives and
disseminates available target information to all staff sections and
commands requiring the information.
15. Coordinate with the Target Information Officer (TIO) and the commander and
his staff in the selection of targets and assignment of classification and
attack priorities.
16. Maintain close liaison and working relations with the operations officer
and the intelligence officer to ensure the most effective planning and
application of fire support.
17. Ensure, in conjunction with the operations officer, timely and adequate
warning of the delivery of chemical munitions is disseminated to all
appropriate commands.
18. Ensure the situation map is maintained and necessary operational records
of the Fire Support Coordination Center (FSCC) are kept.
19. Ensure the most effective means of attacking targets is used.
20. Ensure target classifications and attack priorities are correctly
assigned.
21. Supervise the coordination of cross boundary fires.
22. Supervise the collection and dissemination of target data, to include
target lists and target bulletins. If your Fire Support Coordination
Center (FSCC) is not the senior FSCC, submit a list of targets,
accordingly.
23. Transmit the necessary enemy information collected at the FSCC to all
applicable artillery units.
24. Perform other command and liaison duties, as directed by the commander.
25. Supervise the performance of those assigned to operate in the Fire Support
Coordination Center (FSCC).
9-79
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
PERFORMANCE STEPS:
1. Supervise the establishment of a COC physical plant.
2. Establish Security.
3. Supervise physical set up of the COC.
4. Configure the interior of a COC platform.
5. Operationally check all systems.
6. Manage and coordinate with the different billets in the COC.
7. Support Watch Officers in the performance of duties.
8. Maintain information flow.
9. Supervise the displacement of the COC.
REFERENCES:
1. FMFM 6-3 Marine Infantry Battalion
2. MCRP 5-12A Operational Terms and Graphics
3. Unit Standard Operating Procedures (SOP)
9-80
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Orient the overlay to the area of operation.
2. Place register marks on the overlay.
3. Plot topographical deviations to the map.
4. Plot mission control measures.
5. Plot fire support control measures.
6. Plot friendly symbols.
7. Plot threat symbols.
8. Annotate title and objective.
9. Annotate marginal information.
10. Annotate security classification.
11. Receive approval for the operation overlay from the operations officer.
12. Distribute copies of the operation overlay as required.
REFERENCES:
1. FM 3-25.26 Map Reading and Land Navigation
2. MCRP 5-12A Operational Terms and Graphics
PERFORMANCE STEPS:
1. Schedule the required training to include events from the Training
Exercise and Employment Plan (TEEP) compiled by subordinate staff
sections.
2. Schedule prime time or training cycles.
3. Schedule unit controlled exercises and other training.
4. Conduct backward planning.
5. Identify available training resources and align with training priorities.
6. Develop short and mid range plans as appropriate.
REFERENCES:
1. MCRP 3-0A Unit Training Management Guide (Nov 96)
2. MCRP 3-0B How to Conduct Training (Nov 96)
9-81
NAVMC 3500.44
16 Sep 08
GRADES: MGYSGT
PERFORMANCE STEPS:
1. Assess the unit readiness based on the mission.
2. Identify Mission Essential Task List (METL) from the Infantry Training and
Readiness Manual.
3. Prioritize training requirements.
REFERENCES:
1. MCRP 3-0A Unit Training Management Guide (Nov 96)
9-82
NAVMC 3500.44
16 Sep 08
CHAPTER 10
PARAGRAPH PAGE
10-1
NAVMC 3500.44
16 Sep 08
CHAPTER 10
10000. PURPOSE. This chapter details the individual events that pertain to
the community. These events are linked to a service-level Mission Essential
Tasks (MET). This linkage tailor’s individual training for the selected MET.
Each individual event provides an event title, along with the conditions
events will be performed under, and the standard to which the event must be
performed to be successful.
10001. ADMINISTRATIVE NOTES. T&R events are coded for ease of reference.
Each event has a 4-4-4 digit identifier. The first four digits represent the
occupational field or military occupational field (0306). This chapter
contains Infantry Weapons Officer individual training events. The second
four digits represent the functional or duty area. The last four digits
represent the level, and identifier number of the event. Every individual
event has an identifier number from 001 to 999.
10-2
NAVMC 3500.44
16 Sep 08
10-3
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Teach the selection of firing position.
2. Evaluate the selection of firing position.
3. Teach mounting of weapon system (all platforms).
4. Evaluate mounting of weapon system (all platforms).
5. Teach the gunners rule.
6. Teach the leaders rule.
7. Teach the geometry of fires of all machineguns in support of maneuver.
8. Teach target engagement.
9. Teach limitations/capabilities of machineguns.
10. Teach operations of machineguns.
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. FM 3-22.68 Light and Medium machineguns
4. FMFM 6-4 Marine Rifle Company/Platoon
5. MCO 3570.1B Range Safety (Jun 03)
6. MCWP 3-11.2 Marine Rifle Squad
7. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
8. TM 02498A-10/2 Operator's Manual, Machine Guns, Caliber .50; Browning, M2
Heavy Barrel
9. TM 08521A/09761a-23&p/2a Operator's Manual and Components List,
Machinegun, 40mm, MK 19 Mod 3
10. TM 08670A-10/1A Operator's Manual, Machinegun, 7.62mm, M240
11. TM 08671A-10/1 Operator's Manual, Machinegun, 5.56mm, M249
12. TM 1005-13&P1 Machine Gun Mounts and Combinations for Tactical Armored
Vehicles
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
10-4
NAVMC 3500.44
16 Sep 08
ROOMS/BUILDINGS:
1. Classroom
EQUIPMENT:
1. SL-3 complete Light machineguns
2. 2. SL-3 complete Medium machineguns
3. SL-3 complete Heavy machineguns
4. Grenade machinegun
5. Day optics
6. Passive optics
7. Thermal optics
8. Aiming devices
9. Tactical vehicles with all compatible machinegun mounts
10. All compatible ground mounts
11. MILES 2000
MATERIAL:
1. Thermalized targets
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. In addition from the above references, the appropriate TM for optics
equipment should be used.
2. Operations of weapons system include cycle of operation and
immediate/remedial action.
PERFORMANCE STEPS:
1. Teach the selection of firing position.
10-5
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
0341-60mm-1101 0341-60mm-1103 0341-60mm-1104
0341-81mm-1201 0341-81mm-1203 0341-FDC-2609
0341-WPNS-1307 0341-WPNS-1301 0341-60mm-1108
0341-WPNS-2401 0341-WPNS-2402 0341-81mm-1204
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCO 3570.1B Range Safety (Jun 03)
3. MCRP 3-15.2A Mortars
4. MCRP 3-15.2B Mortar Gunnery
5. TM 08206A-10/1A Operator's Manual, M224 60mm Lightweight Company Mortar
6. TM 09922A-10/1 M252 81mm Mortar Operator's Manual
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
ROOMS/BUILDINGS:
1. Classroom
EQUIPMENT:
1. SL-3 complete 60mm mortar
2. SL-3 complete 81mm mortar
3. M2A2 aiming circle
4. M2 compass
5. Light weight mortar ballistic computer
6. M16 plotting board
7. Computer record data sheets
8. Lensatic compass
MATERIAL:
1. 3D targets
10-6
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. 3 rounds per mortar system for direct lay.
2. 3 rounds per mortar system for direct alignment.
PERFORMANCE STEPS:
1. Teach the geometry of fires of all mortars in support of maneuver.
2. Teach target engagement.
3. Teach limitations/capabilities of mortars.
4. Teach safety diagram.
5. Teach FDC with mortar ballistic computer.
6. Teach FDC without mortar ballistic computer.
7. Teach registration of gun line.
8. Teach receive call for fire.
9. Teach respond to untrained observer.
10. Teach open/converged special sheaves.
11. Teach recorder procedures.
12. Teach traversing and searching fires.
13. Teach illumination missions.
14. Teach smoke missions.
15. Teach fire missions (grid, shift and polar).
16. Teach plotting board with modified construct (parallel plot, pivot point
correction, and modified observer firing chart).
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. FT60-P-1 60mm firing table
3. FT81-AR-2 81mm firing table
4. MCRP 3-15.2A Mortars
5. MCRP 3-15.2B Mortar Gunnery
6. TM 00476C-24&P M2A2 Aiming Circle
7. TM 9-1290-262-10 Operator's Manual, Aiming Circle, M2 and M2A2
8. TM 9-1290-333-15 W/CH 1-4 Compass Magnetic Unmounted, M2
10-7
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
ROOMS/BUILDINGS:
1. Classroom
EQUIPMENT:
1. SL-3 complete 60mm mortar
2. SL-3 complete 81mm mortar
3. M2A2 aiming circle
4. M2 compass
5. Light weight mortar ballistic computer (LMBC)
6. M16 plotting board
7. Computer record data sheets
8. Lensatic compass
9. D-milled 60/81mm rounds
10. Pneumatic mortar
11. Scientific calculator
12. M19 plotting board
13. GPS system
14. M45 bore sight
15. Firing tables
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. 1 round HE for mortar is utilized to sink base plate.
2. 6 rounds 60mm and 16 rounds 81mm HE used to register gun line.
3. Remainder of ammunition covers performance steps 12, 13 and 14.
4. Safety diagram will assist in developing the safety-T.
10-8
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Teach call for fire (grid, shift and polar).
2. Teach call for fire without FDC.
3. Teach FO's role in registration of gun line.
4. Teach target engagement criteria.
5. Teach target analysis and munitions effects.
6. Teach timing the delivery of fire support.
7. Teach construction of a visibility diagram.
8. Teach method of firing the NE MK-80 round with MK-153 launcher.
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCRP 3-15.2B Mortar Gunnery
3. MCRP 3-16.6A J-Fire, Multiservice Procedures for the Joint Application of
Fire Power
4. MCWP 3-16 Fire Support Coordination in the Ground Combat Element
5. MCWP 3-16.6A Supporting Arms Observer, Spotter and Controller (FMFM 6-8)
6. MCWP 3-22.2 Suppression of Enemy Air Defenses (SEAD)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
ROOMS/BUILDINGS:
1. Classroom
EQUIPMENT:
1. Lensatic compass
2. Topographic map
3. Protractor
4. Binoculars
5. Communication equipment
6. Graphical firing scale for 60/81mm mortar
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task includes instruction on thermal binoculars, laser range
finder and other current equipment.
10-9
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Teach methods of engagement (unit/individual) with rockets.
2. Teach the selection of firing position.
3. Evaluate the selection of firing position.
4. Teach the geometry of fires of rockets in support of maneuver.
5. Teach methods of fire and control.
6. Teach limitations/capabilities of rockets.
7. Teach operations of MK153 SMAW.
8. Teach the employment of Anti-Personnel Obstacle Breaching System (APOBS).
9. Teach basic demolitions.
10. Teach breaching using mechanical techniques.
11. Teach Urban Breaching using demolitions.
REFERENCES:
1. ATP-TM-MFAL Advanced Target Pointer Illuminator Aiming Light PEQ-15
2. FM 3-21.91 Tactical Employment of Anti-armor Platoons, Companies and
Battalions
3. FM 3-34.214 Explosives and Demolitions
4. MCRP 3-17A Engineer Field Data (FM 5-34)
5. MCWP 3-11.2 Marine Rifle Squad
6. NAVSEASWO 60-AA-MMA-010 Demolition Materials
7. TM 013750-13&P Operators Manual MK-7 MOD. 1 Anti-Personnel Obstacle
Breaching System (APOBS)
8. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
9. TM 09134A-12&P/1 AT-4 tracer trainer
10. TM 10470A-12&P/1A Operator's and Unit Maintenance Manual, Target Pointer
Illuminator/Aiming Light, AN/PEQ-2A
11. TM 10796-12&P Operators Manual for AN/PVS-17/17B/17C Miniature Night Sight
12. TM 9-1315-886-12 Launcher and Cartridge 84MM, M136 (AT-4)
13. TM 9-1340-214-10 LAAW/LAAW trainer (practice)
14. UMEG Urban Mobility Engineer's Guidebook
SUPPORT REQUIREMENTS:
10-10
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
Facility Code 17640 Antiarmor Tracking And Live-Fire Range
Facility Code 17641 Automated Antiarmor Tracking And Live-Fire Range
ROOMS/BUILDINGS:
1. Classroom
EQUIPMENT:
1. Breaching Kit
2. Ballistic blankets
3. Squad demolition kit
4. MK153 Shoulder launched Multipurpose Assault Weapon (SMAW)
5. Applicable firing devices
6. AT-4 tracer trainer
7. LAAW trainer
MATERIAL:
1. BTI RAM (dynamic door)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. There are a variety of consumables (hinges, glass, wood framing, etc)
that are used during the live fire breaching training.
2. Employment of rockets includes AT-4, LAAW and MK153 SMAW.
3. Operations of weapons system include cycle of operation and
immediate/remedial action.
PERFORMANCE STEPS:
1. Teach methods of engagement (unit/individual) of anti-armor weapon
systems.
2. Teach the selection of firing position.
3. Evaluate the selection of firing position.
4. Teach mounting of weapon system (all platforms).
5. Evaluate mounting of weapon system (all platforms).
6. Teach the geometry of fires of all anti-armor weapons in support of
10-11
NAVMC 3500.44
16 Sep 08
maneuver.
7. Teach methods of fire and control.
8. Teach limitations/capabilities weapon systems.
9. Teach operations of anti-armor weapon systems.
10. Teach armor identifications.
11. Teach mounted land navigation.
REFERENCES:
1. FM 21-305 Manual for Wheeled Vehicle Driver
2. FM 3-21.91 Tactical Employment of Anti-armor Platoons, Companies and
Battalions
3. FM 3-22.37 Javelin Medium Anti-armor Weapon System
4. MCWP 3-15.5 Anti-armor Operations
5. TM 09397B-12/1 Operator and Organizational Maintenance Manual for Javelin
6. TM 2320-10/6A Truck Utility 1/4 Ton 4X4
7. TM 9-1425-472-12 TOW 2 Weapon System Guided Missile System M220E4
8. TM 9-1425-923-12 Saber System (Improved Target Acquisition System) M41A
9. TM 92320-280-10 Technical Manuals for Highly Mobile Multi-Wheeled Vehicle
(HMMWV)
10. Jane's Book of Armored Vehicles (Current Year)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17906 Wheeled Vehicle Drivers Course
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17640 Antiarmor Tracking And Live-Fire Range
Facility Code 17641 Automated Antiarmor Tracking and Live-Fire Range
EQUIPMENT:
1. MILES 2000
2. Field Tactical Training (FTT)
3. Basic Skills Trainer (BST)
4. Precision Gunnery Training System (PGST)
5. Recognition of Combat Vehicles (ROC-V)
MATERIAL:
1. Scaled model kit for armor.
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Anti-armor task can be trained to standard using simulations.
2. Method of engagement includes the HAW, MAW, LAW and mass surprise
techniques.
3. HMMWV must be capable of mounting TOW weapon system.
4. Operations of weapons system include cycle of operation and
immediate/remedial action.
10-12
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Teach mission analysis using METT-T and OCOKAW.
2. Teach priorities of targets.
3. Teach techniques of employment of sniper teams in the offense and the
defense.
4. Teach supporting requirements for sniper teams.
5. Teach capabilities/limitations of sniper weapons and equipment.
REFERENCES:
1. FM 3-05.222 U.S. Army Special Forces Sniper Training and Employment
2. MCWP 3-11.3 Scouting and Patrolling
3. MCWP 3-15.3 Scout Sniping
4. TM 05539D-10/1 M40A3 Sniper Rifle
5. TM 09629B-10/1A SASR M82A3 .50 Cal Rifle
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
Facility Code 17561 Automated Sniper Field Fire Range
ROOMS/BUILDINGS:
1. Classroom
EQUIPMENT:
1. .50 cal SASR series special application scoped rifle
2. M40 series sniper rifle
MATERIAL:
1. Steel targets
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. See the Tri-MEF UUNS sniper suite for appropriate gear.
10-13
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Teach limitations/capabilities of aiming devices.
2. Teach zeroing of aiming devices.
3. Teach target engagement using aiming devices.
4. Teach observation skills with aiming devices, as applicable.
REFERENCES:
1. ATP-TM-MFAL Advanced Target Pointer Illuminator Aiming Light PEQ-15
2. TM 10471A-12&P/1 Laser Boresight System
3. TM 10796-12&P Operators Manual for AN/PVS-17/17B/17C Miniature Night Sight
4. TM 11-5855-308-12&P PEQ-2
5. TM 11-5855-312-10 PAS-13B
6. TM 11-5855-317-10 PAS-13D
7. TM 11065A-OR Day/Night Sight (DNS) for the M203 Grenade Launcher (AN/PSQ-
18A)
8. TM 11085B-OR/1 Operators Manual for Sight, Night Vision Sniper Scope
(AN/PVS-27)
9. TM 11110A-OR Long Range Sniper Rifle (LRSR), USMC Special Application
Scoped Rifle (SASR) Caliber .50, M107
10. TM 11173A-OR/1A Infrared Zoom Laser Illuminator/Designator (IZLID)
11. TM 5538100012-10 RCO
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
Facility Code 17420 Maneuver/Training Area, Heavy Forces
Facility Code 17560 Sniper Field-Fire Range
Facility Code 17561 Automated Sniper Field Fire Range
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17631 Light Antiarmor Weapons Range Live
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17582 Automated Multipurpose Machine Gun Range (MPMG)
Facility Code 17620 40MM (Grenade) Machine Gun Qualification Range
Facility Code 17906 Wheeled Vehicle Drivers Course
Facility Code 17640 Antiarmor Tracking And Live-Fire Range
Facility Code 17641 Automated Antiarmor Tracking And Live-Fire Range
EQUIPMENT:
1. PEQ-2A
2. PEQ-15
10-14
NAVMC 3500.44
16 Sep 08
3. PEQ-16
4. PVS-17B/C
5. PAS-13B/D
6. PSQ-18
7. RCO
8. INFRARED ZOOM LASER ILLUMINATOR/DESIGNATOR (IZLID)
9. LASER BORE SIGHT
10. SSDS
11. AN/PVS-27 (SSMRNS)
MATERIAL:
1. Batteries
PERFORMANCE STEPS:
1. Teach limitations/capabilities of observation devices.
2. Teach observation skills with observation devices.
RELATED EVENTS:
0300-CMBH-1002 0300-CMBH-1001
REFERENCES:
1. TM 10271A-10/1 Operator's Manual, Monocular NVD, AN/PVS-14
2. TM 10988B-OR/1 PAS-22
3. TM 11-5855-262-10-2 Operator's Manual for Night Vision Goggles, AN/PVS-7B
4. TM 9-1240-403-12 & P Operator's and Organizational Maintenance Manual (M22
Binocular)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
Facility Code 17420 Maneuver/Training Area, Heavy Forces
10-15
NAVMC 3500.44
16 Sep 08
ROOMS/BUILDINGS:
1. Classroom
EQUIPMENT:
1. AN/PVS-7 series
2. AN/PVS-14 series
3. PAS-22
4. IWNS-I
5. IWNS-T
6. Mini-Thermal Imager
7. Binoculars
8. Scout Sniper Observation Telescope (SSOT)
MATERIAL:
1. Batteries
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Observation skills roll up under Combat Hunter tasks.
PERFORMANCE STEPS:
1. Construct a small arms and machinegun SDZ.
2. Construct a hand grenade and rifle grenade SDZ.
3. Construct a rocket/missile SDZ.
4. Construct a mortar SDZ.
5. Construct an artillery SDZ.
6. Construct a tank gunnery SDZ.
7. Construct an aerial gunnery SDZ.
8. Construct a combined arms live fire exercise SDZ.
9. Construct a mine, firing devices, trip-flares, simulators and explosive
charges SDZ.
10. Construct a laser SDZ.
RELATED EVENTS:
0306-RNGE-1002
REFERENCES:
1. DA PAM 385-63 Department of the Army Range Safety
2. MCO 3570.1B Range Safety (Jun 03)
10-16
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
ROOMS/BUILDINGS:
1. Classroom
EQUIPMENT:
1. Map
2. Protractor
3. Graduated scale (ruler)
4. Drafting compass
5. Beam compass
6. Graphing/trace paper
7. GIS software with stand alone computer
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Establish a range training area management system (RTAMS) account.
2. Attend inter-service intermediate range safety officer course.
PERFORMANCE STEPS:
1. Coordinate with host nation.
2. Coordinate with higher headquarters'.
3. Coordinate with DASC.
4. Develop range regulations.
5. Construct ranges.
6. Establish communication requirements in support of range operations.
7. Determine resource requirements in support of range operations.
REFERENCES:
1. DA PAM 385-63 Department of the Army Range Safety
2. FM 3-21.91 Tactical Employment of Anti-armor Platoons, Companies and
Battalions
3. FM 3-34.214 Explosives and Demolitions
4. FMFM 6-4 Marine Rifle Company/Platoon
10-17
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
MATERIAL:
1. Stubby pencil
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Resourcing requirements identify personnel support, EOD, equipment,
training areas, equipment support, associated ammunition, and facilities.
2. Coordinate with host nation includes IPC, MPC and FPC.
PERFORMANCE STEPS:
1. Teach the geometry of fires of individual weapons in support of maneuver.
2. Teach methods of fire and control.
3. Teach limitations/capabilities of individual weapons.
4. Teach methods of engagement (unit/individual) with individual weapons.
5. Teach considerations in the employment of grenades and pyrotechnics.
6. Teach considerations in the employment of claymores.
REFERENCES:
1. FM 23-23 Antipersonnel Mine M18A1 Claymore
2. FM 23-30 Grenade
3. MCO 3574.2k Marine Corps Combat Marksmanship Program
4. MK11 7.62 Sniper
5. TM 00526A-24&P/2 Pistol Caliber .45 MEU (SOC)
6. TM 02648C-10/1 Designated Marksman Rifle
10-18
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
ROOMS/BUILDINGS:
1. Electronic classroom
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task should be trained to standard through the use of the
Individual Small-Arms Marksmanship Trainer (ISMT) prior to the expenditure
of live rounds.
2. This task and the Crew-served Weapons tasks can be combined into a
Field Firing Exercise.
10-19
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Provide analysis to the commander on unit capabilities and trends.
2. Act as the commander's eyes and ears (Directed Telescope).
3. Provide subject matter expertise input into the Marine Corps planning
process.
4. Participate in the development of the campaign plan.
5. Conduct weapons safety certifications requirements for unit OIC/RSO.
6. Assess unit training and operational capability.
REFERENCES:
1. DA PAM 385-63 Department of the Army Range Safety
2. FM 23-23 Antipersonnel Mine M18A1 Claymore
3. FM 23-30 Grenade
4. MCO 3570.1B Range Safety (Jun 03)
5. TM 00526A-24&P/2 Pistol Caliber .45 MEU (SOC)
6. TM 013750-13&P Operators Manual MK-7 MOD. 1 Anti-Personnel Obstacle
Breaching System (APOBS)
7. TM 02498A-10/2 Operator's Manual, Machine Guns, Caliber .50; Browning, M2
Heavy Barrel
8. TM 02648C-10/1 Designated Marksman Rifle
9. TM 05538C-10/1A Operator's Manual, Rifle, 5.56mm, M16A2 w/Equipment
10. TM 05539D-10/1 M40A3 Sniper Rifle
11. TM 08206A-10/1A Operator's Manual, M224 60mm Lightweight Company Mortar
12. TM 08521A/09761a-23&p/2a Operator's Manual and Components List,
Machinegun, 40mm, MK 19 Mod 3
13. TM 08670A-10/1A Operator's Manual, Machinegun, 7.62mm, M240
14. TM 08671A-10/1 Operator's Manual, Machinegun, 5.56mm, M249
15. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
16. TM 09134A-12&P/1 AT-4 tracer trainer
17. TM 09629B-10/1A SASR M82A3 .50 Cal Rifle
18. TM 09922A-10/1 M252 81mm Mortar Operator's Manual
19. TM 1005-13&P1 Machine Gun Mounts and Combinations for Tactical Armored
Vehicles
20. TM 1005A-10/1 Pistol, Semiautomatic, 9mm, M9
21. TM 10698A-10/1 M1014, Joint Service Shotgun
22. TM 11235A-OR Operator's Manual for 40mm Multi-Shot Grenade Launcher, M32
23. TM 9-1010-221-10 Operator's Manual Grenade Launcher 40-MM, M203 w/ch 1-4
10-20
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
EQUIPMENT:
1. Weapon system pertinent to the TMs listed in the references.
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Weapons certification includes the use of lasers. The CAT1 LSSO must
attend formal training at Naval Safety School (MIL-HDBK-828 laser range
safety)
PERFORMANCE STEPS:
1. Understand the limitation/capabilities of simulation training hardware.
2. Understand the limitation/capabilities of simulation training software.
3. Understand the limitation/capabilities of simulation training scenarios.
4. Understand the limitation/capabilities of simulation training facilities.
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Simulation programs can be referenced through the Training and
Education Command website: www.tecom.usmc.mil
2. Simulation programs can be used to train tasks to standard when
training resources are limited or unavailable.
10-21
NAVMC 3500.44
16 Sep 08
CHAPTER 11
PARAGRAPH PAGE
11-1
NAVMC 3500.44
16 Sep 08
CHAPTER 11
11000. PURPOSE. This chapter details the individual events that pertain to
the community. These events are linked to a service-level Mission Essential
Tasks (MET). This linkage tailor’s individual training for the selected MET.
Each individual event provides an event title, along with the conditions
events will be performed under, and the standard to which the event must be
performed to be successful.
11001. ADMINISTRATIVE NOTES. T&R events are coded for ease of reference.
Each event has a 4-4-4 digit identifier. The first four digits represent the
occupational field or military occupational field (0311). This chapter
contains Infantryman individual training events. The second four digits
represent the functional or duty area. The last four digits represent the
level, and identifier number of the event. Every individual event has an
identifier number from 001 to 999.
Core Capabilities:
1. Carries out the orders of the infantry Fire Team Leader.
2. Performs the tasks required of a Rifleman in an infantry fire team.
3. Carries, performs operator maintenance for, and is a proficient marksman
with the service rifle/carbine.
4. Engages targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
5. Emplaces and recovers an M18A1 Claymore mine.
6. Detects and marks a mine.
7. Utilizes smoke grenades and pyrotechnics for signaling, illumination, and
screening.
8. Determines current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
11-2
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carries out the orders of the infantry Fire Team Leader.
2. Performs the tasks required of an Assistant Automatic Rifleman in an
infantry fire team.
3. Carries, performs operator maintenance for and is a proficient marksman
with the service rifle/carbine.
4. Assists the Automatic Rifleman in performing operator maintenance for and
engaging targets with a proficient marksman with an M249 squad automatic
weapon.
5. Engages targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
6. Emplaces and recovers an M18A1 Claymore mine.
7. Detects and marks a mine.
8. Utilizes smoke grenades and pyrotechnics for signaling, illumination, and
screening.
9. Determines current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
10. Perform self-aid and buddy aid.
11. Performs individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
12. Communicate using proper communications procedures with organic wired
and wireless communications.
13. Performs fire and movement as an individual and as a member of a fire
team.
14. Locates, closes with, and destroys the enemy by fire and maneuver.
15. Repels an enemy assault by fire and close combat.
_______________________________________________________________________
BILLET: Automatic Rifleman
The Automatic Rifleman carries out the orders of the Fire Team Leader. He is
responsible for the effective employment of the automatic rifle and for the
condition and care of his weapon and equipment. His T/O weapon is the M249
squad automatic weapon (SAW).
Core Capabilities:
1. Carries out the orders of the infantry Fire Team Leader.
2. Performs the tasks required of an Automatic Rifleman in an infantry fire
team.
11-3
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Trains his fire team on all assigned individual T&R training events.
2. Controls his fire team as an element of a patrol.
3. Controls his fire team in the offense.
4. Controls his fire team in the defense.
5. Reports to higher headquarters as required.
6. Conduct Pre-Combat Checks (PCC) and Pre-Combat Inspections (PCI).
_______________________________________________________________________
BILLET: Infantry Squad Leader
The Squad Leader carries out the orders issued to him by the Platoon
Commander. In combat, he is responsible for the tactical employment, fire
discipline, fire control, and maneuver of his squad. His T/O weapon is the
service rifle/carbine. He is also responsible for the discipline,
appearance, training, control, conduct, and welfare of his squad at all
times, as well as the condition, care, and economical use of its weapons and
equipment.
Core Capabilities:
1. Carries out the orders of the Platoon Commander.
2. Performs the tasks required of a Squad Leader in a rifle squad.
3. Maintains the discipline, appearance, control, conduct, and welfare of
his squad.
4. Trains his squad in the performance of tasks that support platoon
training objectives.
5. Maintains the condition, care, and economical use of assigned weapons and
11-4
NAVMC 3500.44
16 Sep 08
equipment.
6. Capable of performing all the tasks required of a riflemen, Assistant
Automatic Rifleman, Automatic Rifleman, and Fire Team Leader.
7. Carries, performs operator maintenance for and is a proficient marksman
with the service rifle/carbine.
8. Capable of performing operator maintenance for and engaging targets with
M249 squad automatic weapon and M203 Grenade Launcher.
9. Engages targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
10. Emplaces and recovers an M18A1 Claymore mine.
11. Detects and marks a mine.
12. Utilizes smoke grenades and pyrotechnics for signaling, illumination,
and screening.
13. Land navigates to designated points using a topographic map, lensatic
compass, protractor, and global positioning equipment while dismounted and
mounted.
14. Perform self-aid and buddy aid.
15. Performs individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
16. Communicate using proper communications procedures with organic wired
and wireless communications.
17. Calls for and adjusts indirect fire.
18. Writes and issues combat orders.
19. Performs fire and movement as an individual and as a member of a rifle
squad.
20. Controls the fire and movement of his rifle squad.
21. Locates, closes with, and destroys the enemy by fire and maneuver.
22. Repels an enemy assault by fire and close combat.
23. Capable of performing operator maintenance for, and is proficient in
employment of, all optics assigned to the rifle platoon.
24. Proficient in proper combat reporting procedures.
25. Capable of zeroing a laser pointer illuminator and a Day/Night Scope
(DNS).
26. Requests close air support.
27. Integrate supporting fires in accomplishment of an assigned mission.
28. Proficient in HLZ procedures.
_______________________________________________________________________
11-5
NAVMC 3500.44
16 Sep 08
11-6
NAVMC 3500.44
16 Sep 08
11-7
NAVMC 3500.44
16 Sep 08
BILLETS: Rifleman
PERFORMANCE STEPS:
1. Depict the PDF as a solid line with an arrow in the target section, and
record the azimuth in the data section.
2. Draw north seeking arrow on card.
3. Record the magnetic azimuth of the sector limits. Primary sector of fire
is drawn as a solid line and a secondary sector of fire is drawn as a
dotted line.
4. Record the back azimuth and distance of the machinegun position to
prominent terrain feature or known point by drawing a solid line with
arrows along the line pointing toward gun position, or record an 8 digit
grid coordinate of machinegun position.
5. Designate estimated range of each circle.
6. Depict dead space in target section.
7. Depict targets in the target section and record azimuths and range to
targets in the data section.
8. Confirm range estimation when possible preferably by fire.
9. Record the gun number.
10. Record unit description up to the company.
11. Record date/time of preparation.
12. Record weapon type.
13. Complete remarks section with all pertinent information
14. Make duplicate range card.
15. Submit 1 copy to higher headquarters.
PREREQUISITE EVENTS:
0311-MOUT-1001 0300-DEF-1001
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
SUPPORT REQUIREMENTS:
11-8
NAVMC 3500.44
16 Sep 08
ORDNANCE:
DODIC Quantity
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 9
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The primary and alternate positions are supported by the same range
card. The supplementary position requires a new range card.
BILLETS: Rifleman
PERFORMANCE STEPS:
1. Coordinate departure of friendly lines.
2. Move by cover and concealed route to the vicinity of the
listening/observation post.
3. Conduct reconnaissance of tentative listening/observation post.
4. Occupy listening/observation post.
5. Establish security.
6. Establish communications.
7. Listen/observe for activity.
8. Report activity to higher.
9. Move listening/observation post as required.
10. Execute evacuation plan as required.
11. Execute relief actions or de-establish listening/observation post.
PREREQUISITE EVENTS:
0300-COMM-1003 0300-COMM-1002 0300-DEF-1002
REFERENCES:
1. MCWP 3-11.3 Scouting and Patrolling
11-9
NAVMC 3500.44
16 Sep 08
BILLETS: Rifleman
GRADES: PVT, PFC, LCPL, CPL, SGT, SSGT, GYSGT, WO-1, CWO-2, 2NDLT, 1STLT,
CAPT
PERFORMANCE STEPS:
1. Determine munitions requirement based on METT.
2. Determine location to deploy munitions based on METT.
3. Employ munitions into designated location.
REFERENCES:
1. FM 3-23.30 Grenades and Pyrotechnic Signals
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
L599 Simulator, Explosive Booby Trap Illu 1
L307 Signal, Illumination Ground White St 1
L598 Simulator, Explosive Booby Trap Flas 1
L312 Signal, Illumination Ground White St 1
L594 Simulator, Projectile Ground Burst M 1
G945 Grenade, Hand Yellow Smoke M18 1
L495 Flare, Surface Trip M49 Series 1
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Use pyrotechnics for signaling, marking, screening, immobilizing,
destruction, disorientation, dispersion, or early warning.
2. This task allows the user to select the munitions needed for the
mission. All DODICs are not required to train to standard.
BILLETS: Rifleman
11-10
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. At station 1, engage targets from a standing fighting position at 35
meters.
2. At station 2, engage a bunker.
3. At station 3, engage a mortar position from a kneeling position at 20
meters.
4. At station 4, engage targets behind cover from an alternate prone position
at 20 meters.
5. At station 5, engage targets in a trench from a standing position at 25
meters.
6. At station 6, engage a wheeled vehicle target from a kneeling position at
25 meters.
7. At station 7, identify hand grenades.
PREREQUISITE EVENTS:
0300-DEMO-1001
REFERENCES:
1. FM 3-23.30 Grenades and Pyrotechnic Signals
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
G811 Grenade, Hand Practice Body M69 18
G878 Fuze, Hand Grenade Practice M228 6
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
11-11
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Mount the sight to the weapon.
2. Adjust the range setting of the DNS for the known range to the target.
3. Don night vision device.
4. Focus night vision device.
5. Turn sight laser aiming light to "Aim Lo" mode.
6. Activate the IR Aim Laser in continuous mode by double-tapping the Laser
Activation Button.
7. Direct the IR Aim Laser at the center of the target.
8. Fire one round and note where the round strikes the ground relative to the
target.
9. Rotate the Boresight Adjusters to move the strike of the round to the
laser aim point.
10. Fire another round and again observe the strike of the round relative to
the target.
11. Repeat steps 7 through 9 until two consecutive rounds land within five
meters of the target.
RELATED EVENTS:
0300-M203-1004
REFERENCES:
1. FM 3-22.31 40-mm Grenade Launcher, M203
2. TM 11065A-OR Day/Night Sight (DNS) for the M203 Grenade Launcher (AN/PSQ-
18A)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B546 Cartridge, 40mm HEDP M433 10
RANGE/TRAINING AREA:
Facility Code 17610 Grenade Launcher Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Must be fired on a range that supports dud producing munitions.
2. This event is designed for a variety of sights to include: leaf,
quadrant and AN/PSQ-18A.
11-12
NAVMC 3500.44
16 Sep 08
BILLETS: Rifleman
CONDITION: Given a service rifle with a mounted M203 grenade launcher and a
mounted night vision sight, ammunition, and a target at 200 to 250 meters,
while wearing a fighting load.
PERFORMANCE STEPS:
1. Load the weapon.
2. Visually acquire the target.
3. Estimate range to target.
4. Place range on night aiming device.
5. Engage target within two minutes.
RELATED EVENTS:
0300-M203-1006 0300-M203-1004
REFERENCES:
1. FM 3-22.31 40-mm Grenade Launcher, M203
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B546 Cartridge, 40mm HEDP M433 3
RANGE/TRAINING AREA:
Facility Code 17610 Grenade Launcher Range
11-13
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Prepare a belt of 12 rounds.
2. Confirm that the weapon is zeroed.
3. Load a drum of 200 rounds.
4. In a time limit of 5 seconds, engage a single-E silhouette target at 200
meters.
5. In a time limit of 10 seconds, engage a double-E silhouette target at 400
meters.
6. In a time limit of 20 seconds, engage a single-E silhouette target at 200
meters and a double-E silhouette target of 400 meters.
7. In a time limit of 25 seconds, engage multiple single-E silhouette targets
at 100 and 200 meters, and a double-E silhouette target at 400 meters.
8. In a time limit of 15 seconds, engage a single-E silhouette target at 600
meters.
9. In a time limit of 15 seconds, engage a double-E silhouette target at 800
meters.
10. In a time limit of 25 seconds, engage a single-E silhouette target at 600
meters and a double-E silhouette target at 800 meters.
11. Don CBRN PPE to MOPP Level 4.
12. In a time limit of 10 seconds, engage a single-E silhouette target at 100
meters, while in MOPP 4.
13. In a time limit of 15 seconds, engage a single-E silhouette target at 300
meters, while in MOPP 4.
14. In a time limit of 20 seconds, engage a single-E silhouette target at 100
meters and a single-E silhouette target at 300 meters, while in MOPP 4.
PREREQUISITE EVENTS:
0300-M249-1006 0300-M249-1009 0300-M249-1007
RELATED EVENTS:
0311-M249-1002 0311-M249-1004 0311-M249-1003
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 212
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
11-14
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. 12 rounds are used to confirm zero.
2. 200 rounds are used for qualification.
3. All target engagements are conducted at the sustained rate using 6-8
round bursts.
4. The ammunition belt of 200 rounds allows for an allotment of two 6-8
round bursts for each of the 15 targets. Any leftover bursts (resulting
from first-burst hits) may be applied to a target that was not hit with the
first or second burst, but no more than three bursts are allowed for any
target.
5. Scoring is as follows: 3 points for first burst hits, 2 points for
second burst hits, 1 point for third burst hits, and minus one point (-1)
for targets not hit.
0311-M249-1002: Qualify on the Fire and Movement Course (Gunnery Table III)
(B)
PERFORMANCE STEPS:
1. Prepare a belt of 228 rounds.
2. In a time limit of 20 seconds, engage a double-E silhouette target at 175
meters and a double-E silhouette target at 200 meters.
3. Rush 10 meters.
4. In a time limit of 10 seconds, engage a double-E silhouette target at 175
meters.
5. Rush 10 meters.
6. In a time limit of 20 seconds, engage a single-E silhouette target at 125
meters and a single-E silhouette target at 150 meters.
7. Rush 10 meters.
8. In a time limit of 20 seconds, engage a double-E silhouette target at 125
meters and a single-E silhouette target at 150 meters.
9. Rush 10 meters.
10. In a time limit of 20 seconds, engage a single-E silhouette target at 100
meters and a double-E silhouette target at 150 meters.
11. Rush 10 meters.
12. In a time limit of 30 seconds, engage a single -E silhouette target at 100
meters and multiple double-E silhouette targets at 125 and 150 meters.
13. Rush 10 meters.
14. In a time limit of 20 seconds, engage a double-E silhouette target at 75
meters and a single-E silhouette target at 100 meters.
11-15
NAVMC 3500.44
16 Sep 08
PREREQUISITE EVENTS:
0300-M249-1006 0311-M249-1001 0300-M249-1009
0300-M249-1007
RELATED EVENTS:
0311-M249-1004 0311-M249-1003
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A059 Cartridge, 5.56mm Ball M855 10/Clip 28
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 200
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. If emergency reloading needs to be performed during target exposure,
the time limit should be extended by 10 seconds.
2. Rushes should be no more than 10 meters and take no more than 3
seconds.
3. All target engagements should be conducted at the sustained rate (6-
round bursts) within the specified time limit.
4. The ammunition load of 228 rounds allows for an allotment of two 6-
round bursts for each of the 19 targets. Any leftover bursts (resulting
from a first-burst hit) may be applied to a target that was not hit with
the first or second burst, but no more than three bursts are allowed for
any target.
5. Targets should not be exposed until the automatic rifleman has
performed his next rush. Time begins when the targets are exposed.
Multiple targets are exposed simultaneously.
6. Scoring criteria: 3 points for 1st burst hits, 2 points for 2nd burst
hits, 1 point for 3rd burst hits, minus one (-1) point if target is not hit
within the first three bursts.
11-16
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Prepare a belt of 72 rounds.
2. In a time limit of 10 seconds, engage a single-E silhouette target at 25
meters while firing from the standing position.
3. Rush forward 5 meters.
4. In a time limit of 20 seconds, engage a single-E silhouette target at 25
meters and a single-E silhouette target at 50 meters while firing from the
kneeling position.
5. Rush forward 5 meters.
6. In a time limit of 30 seconds, engage a single-E silhouette target at 25
meters, a single-E silhouette target at 50 meters, and a single-E
silhouette target at 75 meters while firing from the squatting position.
PREREQUISITE EVENTS:
0300-M249-1006 0300-M249-1007 0311-M249-1002
0311-M249-1001 0300-M249-1009
RELATED EVENTS:
0311-M249-1004
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 72
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. All target engagements are conducted at the sustained rate (6-round
burst).
11-17
NAVMC 3500.44
16 Sep 08
2. Targets should not be exposed until the automatic rifleman has moved
forward 5 meters to his next firing position. Time begins when the targets
are exposed. Multiple targets are exposed simultaneously.
3. The ammunition load allows for an allotment of two 6-round bursts for
each of the 6 targets. Any leftover bursts (resulting from a first-burst
hit) may be applied to a target that was not hit with the first or second
burst, but no more than three bursts are allowed for any target.
4. Scoring criteria: 3 points for 1st burst hits, 2 points for 2nd burst
hits, 1 point for 3rd burst hits, minus one (-1) point if target is not hit
within the first three bursts.
PERFORMANCE STEPS:
1. Prepare a belt of 60 rounds.
2. In a time limit of 15 seconds, engage a single-E silhouette target at 100
meters.
3. In a time limit of 15 seconds, engage a single-E silhouette target at 200
meters.
4. In a time limit of 20 seconds, engage a double-E silhouette target at 400
meters.
5. In a time limit of 15 seconds, engage a single-E silhouette target at 100
meters.
6. In a time limit of 20 seconds, engage a double-E silhouette target at 300
meters.
PREREQUISITE EVENTS:
0311-M249-1001 0311-M249-1003 0311-M249-1002
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 60
11-18
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Targets are NON_ILLUMINATED and will be engaged with one of the
following devices: AN/PEQ-2A TPIAL with AN/PVS-14, AN/PVS-17C MNS, or
AN/PAS-13B(V)2 TWS.
2. All target engagements should be conducted at the sustained rate (6-
round bursts) within the specified time limit.
3. The ammunition load of 60 rounds allows for an allotment of two 6-round
bursts for each of the 5 targets. Any leftover bursts (resulting from a
first-burst hit) may be applied to a target that was not hit with the first
or second burst, but no more than three bursts are allowed for any target.
4. Scoring criteria: 3 points for 1st burst hits, 2 points for 2nd burst
hits, 1 point for 3rd burst hits, minus one (-1) point if target is not hit
within the first three bursts.
PERFORMANCE STEPS:
1. Select a suitable target downrange, preferably at 300 meters.
2. Ensure that both the rail grabber and TPIAL have been securely tightened
with a flat-tip screwdriver.
3. Ensure that the TPIAL has been preset to zero.
4. Turn the selector switch to Setting 3 (AIM - HI).
5. While looking through the NVD, press the cable switch button to activate
the aiming beam.
6. Manipulate the gun until the aiming beam is centered on the target.
7. Fire a 6-round burst and observe the beaten zone.
8. Re-tighten the PEQ-2 and its mount with a screwdriver.
9. Re-lay the gun to move the impacts onto the target.
10. Repeat steps 6 through 8 above until the burst is on target.
11. Once the burst is on target, keep the gun in place and have an assistant
make adjustments to move the aiming beam onto the target by adjusting
windage first, then elevation.
12. Re-tighten both the rail grabber and TPIAL with a screwdriver.
13. Fire another 6-round burst and make any necessary adjustments to the
aiming beam.
11-19
NAVMC 3500.44
16 Sep 08
PREREQUISITE EVENTS:
0300-M249-1009 0300-M249-1006
RELATED EVENTS:
0311-M249-1004
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 11-5855-308-12&P PEQ-2
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 30
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
0311-M249-1006: Zero the AN/PVS-17C for the squad automatic weapon (B)
PERFORMANCE STEPS:
1. Select a suitable target downrange, preferably at 300 meters.
2. Ensure the PVS-17 mount has been securely tightened to the rail with a
flat-tip screwdriver.
3. Turn the PVS-17 on and adjust the reticle for brightness and focus.
4. Lay the gun on the target, with the reticle in the center of the target.
5. Fire a 6-round burst and observe the beaten zone.
6. Re-tighten the PVS-17 mount with a screwdriver.
11-20
NAVMC 3500.44
16 Sep 08
PREREQUISITE EVENTS:
0300-M249-1009 0300-M249-1006
RELATED EVENTS:
0311-M249-1004 0311-M249-1007 0311-M249-1005
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 10796-12&P Operators Manual for AN/PVS-17/17B/17C Miniature Night Sight
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 30
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
0311-M249-1007: Zero the AN/PAS-13B(V)2 for the squad automatic weapon (B)
PERFORMANCE STEPS:
1. Select a suitable target downrange, preferably at 400 meters.
2. Ensure the TWS mount has been securely tightened to the rail with a flat-
tip screwdriver.
3. Turn the TWS on and adjust the focus ring to bring the target into focus.
4. Turn the FOV ring to select NFOV, which is optimal for field zeroing.
5. Select the reticle for the weapon system (M249 or M240).
11-21
NAVMC 3500.44
16 Sep 08
PREREQUISITE EVENTS:
0300-M249-1006 0300-M249-1009
RELATED EVENTS:
0311-M249-1004 0311-M249-1006 0311-M249-1005
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 10091B/10092B-10/1 AN/PAS-13B(V)2 & 3 THERMAL SIGHT
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A064 Cartridge, 5.56mm 4 Ball M855/1 Trac 30
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
BILLETS: Rifleman
11-22
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Clear the grenade launcher.
2. Disassemble the grenade launcher.
3. Clean the grenade launcher.
4. Inspect the grenade launcher.
5. Lubricate the grenade launcher.
6. Assemble the grenade launcher.
7. Conduct a function check.
REFERENCES:
1. TM 11235A-OR Operator's Manual for 40mm Multi-Shot Grenade Launcher, M32
BILLETS: Rifleman
PERFORMANCE STEPS:
1. Fully release trigger and pull the trigger a second time.
2. Wait 30 seconds.
3. If the round fails to fire pull the trigger again and wait an additional
30 seconds.
4. If round does not fire, open receiver and unload round.
5. Isolate the round.
6. Press the manual release on the index mechanism and continue to fire.
REFERENCES:
1. TM 11235A-OR Operator's Manual for 40mm Multi-Shot Grenade Launcher, M32
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B472 Cartridge, 40mm Dummy M922 6
11-23
NAVMC 3500.44
16 Sep 08
BILLETS: Rifleman
PERFORMANCE STEPS:
1. Clear the weapon.
2. Charge the weapon.
3. Load the weapon.
4. Unload the weapon.
REFERENCES:
1. TM 11235A-OR Operator's Manual for 40mm Multi-Shot Grenade Launcher, M32
BILLETS: Rifleman
CONDITION: Given an M32 Multi Shot 40mm Grenade Launcher, ammunition, and
target at 150 meters, while wearing a fighting load.
PERFORMANCE STEPS:
1. Place the weapon in a stable position.
2. Place sights on 150 meters.
3. Charge the weapon and load three rounds.
4. Fire a round at the target.
5. Adjust windage and elevation as required.
6. Repeat steps 4 and 5 as needed.
11-24
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. TM 11235A-OR Operator's Manual for 40mm Multi-Shot Grenade Launcher, M32
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B519 Cartridge, 40mm Target Practice M781 3
RANGE/TRAINING AREA:
Facility Code 17610 Grenade Launcher Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Minimum safe distance for training is 165 meters and combat safe
distance is 31 meters.
MOS PERFORMING: 0300, 0302, 0311, 0317, 0321, 0331, 0341, 0351, 0352, 0369
PERFORMANCE STEPS:
1. Assume a covered position.
2. Place estimated range on sight for target one.
3. Load six rounds.
4. Engage one target with a single round until effect on target is attained.
5. Once on target, fire remaining rounds.
6. Reload.
7. Place estimated range on sight for target two.
8. Repeat steps 4 and 5.
9. Perform immediate/remedial action as required.
10. Make a condition 4 weapon.
PREREQUISITE EVENTS:
0311-M32-1002 0311-M32-1004 0311-M32-1003
REFERENCES:
1. TM 11235A-OR Operator's Manual for 40mm Multi-Shot Grenade Launcher, M32
SUPPORT REQUIREMENTS:
11-25
NAVMC 3500.44
16 Sep 08
ORDNANCE:
DODIC Quantity
B519 Cartridge, 40mm Target Practice M781 15
RANGE/TRAINING AREA:
Facility Code 17610 Grenade Launcher Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. In the reference Station 1 is zeroing
2. Formal schools may downgrade this task for target engagement.
BILLETS: Rifleman
STANDARD: To allow maximum fire to be placed within the sector of fire and
provide available protection from enemy fire.
PERFORMANCE STEPS:
1. Select a position that covers primary and secondary sectors of fire.
2. Maintain security.
3. Make maximum use of available cover and concealment.
4. Use construction material that is readily available.
5. Use sandbags to reinforce the walls below, around, and above the position.
6. Construct a wall of sandbags, rubble, or furniture overhead and around the
position, to provide protection from explosions.
7. Avoid square or rectangular holes that are easily identified by the enemy.
8. Place sandbags over holes not being used, to prevent the enemy from firing
into or observing through them.
9. Place available material over windows, to keep the enemy from throwing in
hand grenades.
10. Take measures to reduce dust that may create a signature.
11. Utilize field expedient methods for sector coverage.
12. Camouflage the position.
PREREQUISITE EVENTS:
0300-DEF-1002
11-26
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17760 MOUT Assault Course (MAC)
Facility Code 17962 MOUT Collective Training Facility (Small)
BILLETS: Rifleman
PERFORMANCE STEPS:
1. Move to location of vehicle/personnel checkpoint.
2. Provide security/guardian angel.
3. Emplace obstacles to canalize vehicles.
4. Construct deceleration zone to slow approaching vehicles.
5. Adhere to criteria for weapon release (ROE/escalation of force).
6. Construct a search zone, personnel and vehicles are to be searched
separately.
7. Search vehicles/personnel.
8. Handle detainees when applicable.
9. Execute immediate action drills, as required.
10. Dismantle vehicle checkpoint.
11. Move back to friendly position.
REFERENCES:
1. FM 3-07 Stability Operations and Support Operations
2. BUST Handbook
11-27
NAVMC 3500.44
16 Sep 08
BILLETS: Rifleman
PERFORMANCE STEPS:
1. Identify an entry point.
2. Set external security.
3. Suppress the objective (if applicable).
4. Identify method of entry
5. Coordinate movement.
6. Move towards entry point.
7. Execute method of entry.
8. Set internal security.
9. Mark entrance.
10. Call up follow on forces
REFERENCES:
1. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
BILLETS: Rifleman
PERFORMANCE STEPS:
1. Perform individual actions as a member of a buddy team.
2. Perform individual actions during fire and movement.
3. Perform individual actions in a wedge.
4. Perform individual actions in a column.
5. Perform individual actions in skirmishes (right) (left).
6. Perform individual actions in an echelon (right) (left).
7. Perform individual actions as a part of the fighter-leader concept.
8. Perform individual actions as part of a base unit.
11-28
NAVMC 3500.44
16 Sep 08
PREREQUISITE EVENTS:
0300-PAT-1005
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A080 Cartridge, 5.56mm Blank M200 Single 23
L312 Signal, Illumination Ground White St 10
L598 Simulator, Explosive Booby Trap Flas 19
L495 Flare, Surface Trip M49 Series 44
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task can be trained to standard through the use of the Visual
Battlefield System 1 (VBS1).
BILLETS: Rifleman
PERFORMANCE STEPS:
1. Execute the duties of the point man.
2. Execute the duties of the cover man.
3. Execute the duties of the navigator.
4. Execute the duties of the pace man.
5. Execute the duties of the radio operator.
6. Execute the duties of the flank security.
7. Execute the duties of the rear security.
8. Execute duties as a member of the aid and litter team.
9. Execute duties as a member of the Detainee/EPW search team.
10. Execute duties as a member of the demolition team.
11-29
NAVMC 3500.44
16 Sep 08
PREREQUISITE EVENTS:
0300-PAT-1003 0300-COMM-1005 0300-DEMO-1003
0300-PAT-1008 0300-PAT-1006
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
2. MCWP 3-11.3 Scouting and Patrolling
BILLETS: Rifleman
PERFORMANCE STEPS:
1. Identify sector.
2. Operate observation devices.
3. Scan a sector.
4. Identify threats.
5. Assess threats.
6. Perform basic individual predatory combat skills.
7. Execute combat condition/situational awareness codes (Cooper Color Code).
8. Report information to higher.
REFERENCES:
1. 0962134201 "To Ride, Shoot Straight and Speak the Truth" by Jeff Cooper
2. MCWP 3-11.2 Marine Rifle Squad
3. MCWP 3-11.3 Scouting and Patrolling
11-30
NAVMC 3500.44
16 Sep 08
GRADES: CPL
PERFORMANCE STEPS:
1. Emplace personnel.
2. Assign sectors of fire.
3. Assign organic weapons target precedence.
4. Assign engagement criteria.
5. Assign disengagement criteria.
6. Prepare fire plan sketch.
7. Employ M18A1 claymore.
8. Enforce tactical control measures.
9. Control organic fires.
10. Assign individual duties.
11. Assign buddy team duties.
12. Conduct Pre-Combat Checks and Inspections (PCC/Is).
13. Report as required.
14. Enforce continuing actions.
RELATED EVENTS:
0311-DEF-2002 0311-DEF-2006
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This includes all defensive operations to include MOUT and counter
mechanized.
11-31
NAVMC 3500.44
16 Sep 08
GRADES: SGT
PERFORMANCE STEPS:
1. Receive order from Plt Sgt/Plt Cmdr.
2. Conduct map and physical reconnaissance of assigned area to determine the
general lay of the defense, natural obstacles, likely enemy avenues of
approach, and adjacent units.
3. Conduct deliberate planning.
4. Establish local security beyond proposed defensive area.
5. Supervise the occupation of hasty positions.
6. Establish crew served positions, ensuring mutual supporting fires.
7. Coordinate with adjacent units.
8. Ensure units are tied in.
9. Cover dead space by direct/indirect fire.
10. Designate primary, alternate, and supplementary positions.
11. Ensure communications are established between teams and to listening
post/observation posts (LP/OP).
12. Register final protective fires.
13. Supervise the construction of a barrier plan.
14. Collect fire team fire plan sketches and crew-served attachment's range
cards.
15. Submit consolidated squad fire plan sketch to platoon commander.
16. Supervise continuing actions.
RELATED EVENTS:
0311-DEF-2003 0311-DEF-2004 0311-DEF-2005
0311-DEF-2006 INF-0331-4107 INF-0351-3103
INF-0351-3104 INF-0351-4102 INF-0331-4103
INF-0331-3103
REFERENCES:
1. FMFM 6-4 Marine Rifle Company/Platoon
2. MCWP 3-11.2 Marine Rifle Squad
SUPPORT REQUIREMENTS:
11-32
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This includes all defensive operations to include MOUT and counter
mechanized.
GRADES: SGT
PERFORMANCE STEPS:
1. Determine method of support and tentative primary defensive positions.
2. Determine type of fires to be employed, target precedence, and engagement
criteria.
3. Emplace machinegun to best support defense.
4. Identify alternate and supplementary positions.
5. Ensure machinegun is tied in with infantry support.
6. Ensure coordination is conducted with adjacent units.
7. Compile completed range card, and ensure integration of fires, in
accordance with defensive plan.
8. Supervise registration of range card data.
9. Supervise delivery of fires for the defense and counterattack.
REFERENCES:
1. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This includes all defensive operations, to include MOUT and counter-
mechanized strong point.
11-33
NAVMC 3500.44
16 Sep 08
GRADES: SGT
PERFORMANCE STEPS:
1. Determine method of support and tentative primary defensive positions.
2. Determine type of fires to be employed, target precedence, and engagement
criteria.
3. Consider employment of assault team to assist in construction of
obstacles.
4. Emplace assault team to best support the defense.
5. Identify alternate and supplementary positions.
6. Ensure coordination is conducted with adjacent units.
7. Compile completed range card and ensure integration of fires, in
accordance with defensive plan.
8. Supervise delivery of fires for the defense and counterattack.
REFERENCES:
1. FM 5-102 Countermobility
2. MCWP 3-15.5 Anti-armor Operations
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This includes all defensive operations, to include MOUT and counter-
mechanized strong point.
11-34
NAVMC 3500.44
16 Sep 08
GRADES: SGT
CONDITION: Given a 60mm mortar unit and a mission with commander’s intent.
PERFORMANCE STEPS:
1. Determine method of employment, priority targets, priority of fires,
tentative primary firing position, signals, and logistics.
2. Employ 60mm mortar using direct lay, direct alignment, and hand held mode.
3. Teach Section Leader fire commands without the use of an FDC.
4. Integrate employment plan with external fire support assets.
5. Position mortars to best support defense and counterattack plan.
6. Ensure mortar position has security.
7. Ensure 360 degrees of fire support.
8. Register mortar.
9. Identify Final Protective Fire (FPF) location.
10. Register FPF.
11. Register additional planned targets, time and ammunition permitting.
12. Ensure data for FPF is maintained on gun, when not firing on other
targets.
13. Anticipate and plan resupply requirements.
14. Monitor Call For Fire (CFF).
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. MCRP 3-15.2A Mortars
3. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
11-35
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Illustrate all fire team positions.
2. Illustrate any leader fighting positions.
3. Illustrate sectors of fire.
4. Illustrate principle direction of fire for the squad automatic weapons.
5. Illustrate crew-served weapon positions and their PDFs or FPLs.
6. Illustrate dead space.
7. Illustrate M203 grenade launcher targets.
8. Illustrate mines, booby traps, and obstacles.
9. Illustrate FPF locations.
10. Illustrate terrain.
11. Annotate magnetic north.
12. Annotate unit designation.
13. Annotate time and date of preparation.
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
PERFORMANCE STEPS:
1. Supervise company intelligence collection effort.
2. Request and integrate non-organic support into the collection effort.
3. Coordinate the tactical employment of organic Micro Aerial Vehicle (MAV)
to support company operations.
4. Produce intelligence briefs for the Company Commander.
5. Conduct intelligence briefs to support operations.
6. Conduct debriefs to support the collection effort.
7. Supervise the production and dissemination of intelligence reports.
8. Produce unit target packages.
9. Supervise the production of local area maps, imagery, and products within
capability.
10. Request intelligence products from non-organic sources.
11. Supervise detainee tracking for further exploitation.
12. Rapidly process, disseminate, and exploit information gained through
11-36
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-INT-6441 0311-INT-2004 0311-INT-2003
0311-INT-2002
REFERENCES:
1. MCWP 2-1 Intelligence Operations
SUPPORT REQUIREMENTS:
EQUIPMENT:
1. CLIC assets (communication equipment, intelligence products, etc.).
UNITS/PERSONNEL:
1. Role players.
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. An event scenario must be provided that incorporates requirements to
facilitate training to standard.
PERFORMANCE STEPS:
1. Develop company level intelligence collection plan.
2. Assist in the production of daily intelligence reports for submission to
higher, adjacent, and supporting units.
3. Input information into the appropriate system for analysis, dissemination,
11-37
NAVMC 3500.44
16 Sep 08
and production.
4. Collect and input data from Biometrics Automated Toolset System (BATS) and
Handheld Interagency Identity Detection Equipment (HIIDE).
5. Assist in the production of intelligence briefs to support operations.
6. Conduct debriefs to support the collection effort.
7. Process information gathered from tactical site exploitation (TSE)
evidence, tactical questioning (TQ), document exploitation (DOCEX), and
other means.
8. Monitor unit Micro Aerial Vehicle (MAV) assets.
9. Maintain communications with supported and supporting units.
10. Operate digital cameras and video assets.
11. Operate an intelligence operations workstation (IOW) with related
software.
12. Assist in the enforcement of active and passive counterintelligence
measures.
RELATED EVENTS:
INF-INT-6441 0311-INT-2004 0311-INT-2003
0311-INT-2001
REFERENCES:
1. MCWP 2-1 Intelligence Operations
SUPPORT REQUIREMENTS:
EQUIPMENT:
1. CLIC assets (communication equipment, intelligence products, etc.).
UNITS/PERSONNEL:
1. Role players
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. An event scenario must be provided that incorporates requirements to
facilitate training to standard.
11-38
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Assist the CLIC Chief in producing Company Commander's intelligence
briefs.
2. Produce daily intelligence reports for submission to supported and
supporting units.
3. Produce and maintain unit target packages and story boards.
4. Assist in the planning and execution of the company collection effort.
5. Produce local area maps, imagery, and products within capability.
6. Rapidly process, disseminate, and exploit information gained through
tactical site exploitation (TSE), tactical questioning (TQ), document
exploitation (DOCEX), and other means.
7. Conduct intelligence briefs to support operations.
8. Assist with debriefs to support the collection effort.
9. Track detainees for further exploitation.
10. Maintain communications with supported and supporting units.
11. Operate digital cameras and video assets.
12. Operate intelligence operations workstation (IOW) and related software.
13. Assist in the enforcement of active and passive counterintelligence
measures.
RELATED EVENTS:
0311-INT-2001 INF-INT-6441 0311-INT-2004
0311-INT-2002
REFERENCES:
1. MCWP 2-1 Intelligence Operations
SUPPORT REQUIREMENTS:
EQUIPMENT:
1. CLIC assets (communications equipment, intelligence products, etc.)
UNITS/PERSONNEL:
1. Role players
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. An event scenario must be provided that incorporates requirements to
facilitate training to standard.
11-39
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Conduct intelligence updates/briefs for the platoon as required.
2. Conduct liaison between the CLIC and the platoon.
3. Request local area maps, imagery, and products.
4. Assist CLIC in intelligence briefs to support operations.
5. Ensure units members maintain appropriate tactical logbooks and records
for further processing and exploitation by the CLIC.
6. Assist CLIC in debriefs to support the collection effort.
7. Assist unit members in conducting detainee operations.
8. Assist unit members in conducting tactical site exploitation (TSE).
9. Operate digital cameras and video assets.
10. Operate the Biometrics Automated Toolset System (BATS).
11. Operate the Handheld Interagency Identity Detection Equipment (HIIDE).
12. Operate the platoon's digital voice recorders.
13. Assist in the enforcement of active and passive counterintelligence
measures.
RELATED EVENTS:
0311-INT-2001 INF-INT-6441 0311-INT-2003
0311-INT-2002
REFERENCES:
1. MCWP 2-1 Intelligence Operations
SUPPORT REQUIREMENTS:
EQUIPMENT:
1. CLIC assets (communications equipment, intelligence products, etc.)
UNITS/PERSONNEL:
1. Role players
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. An event scenario must be provided that incorporates requirements to
facilitate training to standard.
11-40
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Place the weapon in a fixed position with the sight set on zero meters.
2. Place the bore sighting wall chart on a flat surface and at the same
elevation as the M32.
3. Charge the cylinder and place the crosshair gauge in the muzzle of the M32
barrel.
4. Place the headspace gauge in the chamber aligned with the M32 barrel.
5. Sighting (looking) through the hole in the headspace gauge, match these
crosshairs with the bottom cross hairs marked "BORE" on the bore sighting
wall chart.
6. Use the screwdriver and the sight adjustment screws to adjust the
elevation and windage of the sight until the reticule is aligned with the
top crosshair marked "SIGHT" on the bore sighting wall chart.
REFERENCES:
1. TM 11235A-OR Operator's Manual for 40mm Multi-Shot Grenade Launcher, M32
PERFORMANCE STEPS:
1. Initiate reconnaissance plan ahead of attack, to gain and maintain
observation of enemy.
2. Task organize the squad to include assault element, security element, and
support element.
3. Execute tactical deception, if planned.
4. Isolate the object through direct and indirect fires.
5. Initiate prearranged fires, to include suppression and obscuration fires
on enemy observation posts.
6. Cross line of departure at the specified time.
7. Gain a foothold in limited objectives.
8. Maintain communications with subordinate elements.
9. Report crossing of tactical control measures and securing interim
objectives to platoon commander.
10. Adjust, shift, and cease direct and indirect fires to support successes.
11-41
NAVMC 3500.44
16 Sep 08
11. Breach obstacles, create friendly building accesses, and close off
unnecessary routes, without committing additional forces.
12. Maintain momentum of the attack by rotating lead unit and supplies.
13. Seize the assigned objective.
14. Report status of the attack to platoon commander.
15. Issue fragmentary orders to teams/elements and attachments in preparation
for follow-on missions.
RELATED EVENTS:
INF-MOUT-4809 INF-MOUT-4808 INF-MOUT-5803
INF-MOUT-5801 INF-MOUT-4810
REFERENCES:
1. FM 90-10-1 Infantryman's Guide to Combat in Built-Up Areas
2. MCRP 5-12A Operational Terms and Graphics
3. MCWP 3-11.2 Marine Rifle Squad
4. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17962 MOUT Collective Training Facility (Small)
PERFORMANCE STEPS:
1. Conduct deliberate planning.
2. Move squad to location of vehicle control point.
3. Establish security and guardian angels.
4. Establish the canalization zone to force vehicles to the checkpoint.
5. Establish the turning or the deceleration zone to slow approaching
vehicles using signs, barriers, and/or signals with enough stand-off to
identify intent, act on hostile intent (IAW ROE), and protect the force.
6. Establish criteria for weapon release.
7. Establish the search zone, personnel and vehicles are to be searched
separately.
8. Supervise the searching of vehicles/personnel.
9. Supervise the handling of detainees when applicable.
10. Supervise the dismantling of the vehicle checkpoint.
11-42
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
INF-MOUT-4813 INF-MOUT-5814 INF-MOUT-4814
REFERENCES:
1. BUST Handbook
GRADES: CPL
PERFORMANCE STEPS:
1. Maintain contact with adjacent unit(s).
2. Control the fire team's fire and movement.
3. Emplace personnel on limit of advance.
4. Assign sectors of fire on limit of advance.
5. Coordinate with adjacent units.
6. Report as required.
7. Assign individual duties.
8. Assign buddy team duties.
9. Conduct Pre-Combat Checks and Inspections (PCC/PCIs).
10. Enforce continuing actions.
RELATED EVENTS:
0311-OFF-2002
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
11-43
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Initiate reconnaissance plan ahead of attack to gain and maintain
observation of enemy.
2. Execute tactical deception, if planned.
3. Initiate prearranged fires.
4. Cross line of departure (LOD) at the specified time.
5. Report crossing of tactical control measures to platoon commander.
6. Overcome enemy forces enroute to objective, without becoming decisively
engaged or committing unnecessary forces.
7. Maintain status of teams and positions to best influence the attack.
8. Adjust, shift, and cease direct and indirect fires to support successes.
9. Avoid committing units in a piecemeal fashion.
10. Pursue beyond objective to the limit of advance before transitioning into
the consolidation.
11. Report status of the attack to platoon commander.
12. Issue fragmentary orders to teams and attachments in preparation for
follow-on missions.
RELATED EVENTS:
0311-OFF-2003 0311-OFF-2004 0311-OFF-2005
0311-OFF-2006 INF-0331-4102 INF-0341-4101
INF-0352-4101 INF-0351-4101 0311-OFF-2007
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
GRADES: SGT
PERFORMANCE STEPS:
1. Determine demolition requirements.
2. Submit request for additional support and/or material.
3. Supervise construction of an electric initiation system.
11-44
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 23-23 Antipersonnel Mine M18A1 Claymore
2. FM 5-250 Explosives and Demolitions
3. FMFM 13-7 MAGTF Breaching Operations
4. MCRP 3-17A Engineer Field Data (FM 5-34)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
Facility Code 17905 Mine Warfare Area
GRADES: SGT
PERFORMANCE STEPS:
1. Determine method of support for machinegun team.
2. Provide appropriate signals for commence, shift, and cease.
3. Direct positioning of machinegun team to best observe and support scheme
of maneuver.
4. Provide infantry security for machinegun team.
5. Ensure fires commence, shift, and cease on signal to support the attack.
6. Direct displacement to ensure continuous support.
7. Direct positioning of machinegun team in preparation for counterattack.
8. Reposition machinegun team for defense.
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
11-45
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This includes all offensive operations to include MOUT/mechanized/
fortified strong point.
GRADES: SGT
PERFORMANCE STEPS:
1. Determine method and type of support for the assault team.
2. Request additional assets (demolitions, rockets, etc.).
3. Position assault team with infantry security.
4. Direct the employment of rocket assets.
5. Direct the employment of demolitions.
6. Position assault team to best support consolidation.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCWP 3-11.2 Marine Rifle Squad
3. MCWP 3-15.5 Anti-armor Operations
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This includes all offensive operations to include MOUT/mechanized/
fortified strong point.
11-46
NAVMC 3500.44
16 Sep 08
GRADES: SGT
PERFORMANCE STEPS:
1. Determine method of employment, priority targets, priority of fires,
method of displacement, signals, and logistics.
2. Employ 60mm mortars using direct lay, direct alignment, and hand held
mode.
3. Integrate employment plan with external fire support assets.
4. Designate tentative mortar firing positions.
5. Anticipate displacement requirements, in order to maintain support.
6. Monitor Calls For Fire (CFF).
7. Position mortars to support consolidation.
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
2. MCRP 3-15.2A Mortars
3. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
11-47
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Report obstacle location, type, and size to higher headquarters.
2. Establish local security in an overwatch position.
3. Assess obstacle, enemy situation, and terrain to determine breach point
and assets required to include supporting arms.
4. Request additional assets based on METT-TSL.
5. Task organize unit into a breach element and a support element.
6. Employ fires to suppress enemy.
7. Consider use of smoke to obscure target to the enemy.
8. Move the breach element to the breach point, using available cover and
concealment.
9. Employ demolitions, as required.
10. Ensure booby traps, unexploded munitions, and breach lanes are clearly
marked for day and night movement.
11. Establish security beyond the breach point.
12. Move all remaining elements through the breach lane.
13. Report location of breach lane to higher headquarters.
14. Continue with assigned mission.
RELATED EVENTS:
0311-OFF-2002 0311-OFF-2003 INF-0351-3102
INF-MAN-5102 INF-0351-3104 INF-0351-3105
INF-MAN-4102 INF-MAN-3102
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. FMFM 13-7 MAGTF Breaching Operations
3. MCRP 3-17A Engineer Field Data (FM 5-34)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
GRADES: CPL
11-48
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Control fire team formations.
2. Maintain contact with adjacent unit(s).
3. Control fire team movement.
4. Assign sectors of fire.
5. Assign organic weapons target precedence.
6. Assign engagement criteria.
7. Assign individual duties.
8. Assign buddy team duties.
9. Conduct Pre-Combat Checks and Inspections (PCC/PCIs).
10. Conduct rehearsals.
11. Enforce continuing actions.
12. Report as required.
RELATED EVENTS:
0311-PAT-2003
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
2. MCWP 3-11.3 Scouting and Patrolling
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
GRADES: SGT
PERFORMANCE STEPS:
1. Receive the mission order from higher.
2. Analyze higher's order.
3. Determine availability of resources and assets.
4. Prepare a patrol warning order.
5. Arrange for reconnaissance.
6. Conduct reconnaissance (physical, map, etc.).
7. Develop courses of action based upon mission analysis, terrain, and
resource availability.
8. Choose a course of action.
9. Develop the orientation.
11-49
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
2. MCWP 3-11.3 Scouting and Patrolling
GRADES: SGT
PERFORMANCE STEPS:
1. Write and issue a warning order.
2. Coordinate with adjacent units.
3. Coordinate with front line troops.
4. Write and issue a patrol order.
5. Conduct inspection and rehearsal (PCC/PCIs).
6. Lead exit of friendly lines.
7. Report exit of friendly lines.
8. Submit combat reports as required.
9. Lead actions on enemy contact.
10. Lead actions on the objective.
11. Request re-entry of friendly lines.
12. Lead patrol on re-entry of friendly lines.
13. Conduct a patrol report.
14. Upon completion of patrol report, conduct debrief of all patrol personnel.
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
2. MCWP 3-11.3 Scouting and Patrolling
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
11-50
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Locate "signs"/evidence of passage.
2. Interpret/analyze "signs".
3. Track/follow "signs," or report to higher.
4. Utilize various tracking formations.
5. Ensure security of patrol while tracking.
6. Ensure camouflage while tracking.
7. Conduct counter-tracking techniques while moving.
8. Gather/Record information and make reports as needed.
RELATED EVENTS:
0300-CMBH-1001 0300-CMBH-1004 0300-CMBH-1003
0300-CMBH-1002
REFERENCES:
1. FM 3-05.222 U.S. Army Special Forces Sniper Training and Employment
2. MCWP 3-11.3 Scouting and Patrolling
3. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
GRADES: CPL
11-51
NAVMC 3500.44
16 Sep 08
CONDITION: Given a fire team, required external support and equipment, and a
mission.
PERFORMANCE STEPS:
1. Reinforce individual weapons skills.
2. Reinforce individual demolitions skills.
3. Reinforce individual optics skills.
4. Reinforce individual offense skills.
5. Reinforce individual defense skills.
6. Reinforce individual patrolling skills.
7. Reinforce individual combat hunter skills.
8. Reinforce individual communications skills.
9. Reinforce individual CBRN skills.
10. Reinforce individual medical skills.
11. Reinforce individual MOUT skills.
12. Reinforce individual munitions skills.
RELATED EVENTS:
0311-DEF-2001 0300-TRNG-2003 0311-PAT-2001
0311-OFF-2001
REFERENCES:
1. MCRP 3-0A Unit Training Management Guide (Nov 96)
2. MCRP 3-0B How to Conduct Training (Nov 96)
3. MCWP 3-11.2 Marine Rifle Squad
4. MCWP 3-11.3 Scouting and Patrolling
GRADES: CPL
CONDITION: Given a fire team, required external support and equipment, and a
mission.
PERFORMANCE STEPS:
1. Conduct offensive operations.
2. Conduct defensive operations.
3. Conduct patrolling operations.
RELATED EVENTS:
0311-DEF-2001 0311-OFF-2001 0311-PAT-2001
0300-TRNG-2003
11-52
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCRP 3-0A Unit Training Management Guide (Nov 96)
2. MCRP 3-0B How to Conduct Training (Nov 96)
3. MCWP 3-11.2 Marine Rifle Squad
4. MCWP 3-11.3 Scouting and Patrolling
11-53
NAVMC 3500.44
16 Sep 08
CHAPTER 12
PARAGRAPH PAGE
12-1
NAVMC 3500.44
16 Sep 08
CHAPTER 12
12000. PURPOSE. This chapter details the individual events that pertain to
the community. These events are linked to a service-level Mission Essential
Tasks (MET). This linkage tailor’s individual training for the selected MET.
Each individual event provides an event title, along with the conditions
events will be performed under, and the standard to which the event must be
performed to be successful.
12001. ADMINISTRATIVE NOTES. T&R events are coded for ease of reference.
Each event has a 4-4-4 digit identifier. The first four digits represent the
occupational field or military occupational field (0317). This chapter
contains 0317 Sniper individual training events. The second four digits
represent the functional or duty area. The last four digits represent the
level, and identifier number of the event. Every individual event has an
identifier number from 001 to 999.
12-2
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carry out the orders of the Scout Sniper Platoon Commander and the
Battalion Intelligence Officer.
2. Perform tasks required of a Scout Sniper.
3. Carries, performs operator maintenance for and is proficient in
marksmanship with the M16 series rifles, the M40 Series sniper rifle, the .50
caliber SASR series rifle, and other designated small arms as required.
4. Utilize mines (Claymore) for defensive survivability.
5. Utilize smoke grenades and pyrotechnics for signaling, illumination, and
screening.
6. Communicate using proper communications procedures with VHF, HF, UHF,
SatCom, multi-band radios, and MSIDS.
7. Adjust and direct indirect fire support and close air support as
required.
8. Conduct surveillance and collects and reports information in support of
combat operations.
9. Detect, select, and reduce key targets and targets of opportunity in
support of combat operations.
10. Advise, plan, and execute basic scout sniper missions in support of
combat operations.
11. Perform the skills sets of Marine Rifleman up to the squad leader level.
12. Perform tasks required of the observer in a two-man sniper team.
13. Establish, build, and occupy Final Firing Positions and hide sites as
required.
14. Employ all optics organic to the Scout Sniper Platoon.
_______________________________________________________________________
BILLET: Chief Scout Sniper
The Chief Scout Sniper is the senior scout sniper in the Scout Sniper
Platoon. He directs the actions of the Scout Sniper Teams under the
direction and guidance of the Scout Sniper Platoon Commander and the
Battalion Intelligence Officer. He is proficient with the M40 series sniper
rifle and the M107 .50 caliber special application scoped rifle (SASR) series
rifle.
Core Capabilities:
1. Carry out the orders of the Scout Sniper Platoon Commander and the
Battalion Intelligence Officer.
2. Train the platoon in the performance of tasks which support platoon,
company, and battalion operations.
3. Assist the commander in conducting operational risk management.
4. Inspect the condition, care, and economical use of assigned weapons and
equipment.
5. Assist in the supply and re-supply of the platoon.
6. Advise on tactical sniper employment from team to platoon level.
7. Perform the duties of Scout Sniper/Observer as required.
8. Serve as liaison for the platoon to the formal scout sniper basic course.
_______________________________________________________________________
12-3
NAVMC 3500.44
16 Sep 08
12-4
NAVMC 3500.44
16 Sep 08
12-5
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Inspect radio and components.
2. Assemble components.
3. Connect to a power source (Batteries/vehicle).
4. Operate controls and indicators (fills, net IDs, frequency, time, etc.).
5. Communicate with a distant station.
6. Maintain radio and components.
7. Troubleshoot as required.
8. Remove power source.
9. Disassemble components.
10. Inspect radio and components.
REFERENCES:
1. 10515-0103-4001 AN/PRC-150(c) Harris Radio Set, Operator Reference Guide
2. MCRP 3-40.3B Radio Operators Handbook
12-6
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Prepare the equipment for secure voice operation.
2. Conduct a secure communications check.
3. Perform operator level preventive maintenance.
REFERENCES:
1. FM 3-30 Communications
2. MCRP 3-40.3B Radio Operators Handbook
3. TM 11-5810-256-OP-2 Operating Procedures for Communication Security
Equipment
PERFORMANCE STEPS:
1. Estimate distance to targets.
2. Identify reference points.
3. Establish 3 sectors.
4. Identify center azimuth.
5. Include marginal data.
6. Draw terrain features on range card.
7. Write marginal information and target information.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
12-7
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Ensure that you and the casualty are no longer under direct enemy fire.
2. Communicate the situation to higher headquarters.
3. Ensure the tactical situation allows for time to treat casualty before
initiating any medical procedures.
4. Evaluate a casualty for shock.
5. Determine level of consciousness.
6. Assess the casualty's airway.
7. Assess the casualty for chest injuries.
8. Identify and control major bleeding.
9. Assess for climatic injuries (hot or cold).
10. Identify and treat other wounds (dress all wounds, including exit wounds,
splint obvious fractures).
REFERENCES:
1. MCRP 3-02G First Aid (Dec 02)
PERFORMANCE STEPS:
1. Plot points on a map using the protractor.
2. Determine the eight-digit grid coordinates of the points on the map.
3. Determine the straight line and/or curved line distance between two points
on a map.
4. Determine a back azimuth.
5. Determine the grid azimuth.
6. Convert grid azimuths to magnetic azimuths.
7. Convert magnetic azimuths to grid azimuths.
8. Compile route card information.
9. Pre-set compass.
10. Orient a map.
11. Navigate to objective(s).
12. Conduct resections as required.
13. Conduct intersections as required.
REFERENCES:
1. FM 3-25.26 Map Reading and Land Navigation
12-8
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Ensure the military aspects of terrain are identified.
PERFORMANCE STEPS:
1. Identify terrain features in objective area.
2. Measure any personnel or equipment in the objective area as needed.
3. Determine scale to be used on the sketch.
4. Place reference points/azimuths on the sketch.
5. Draw features on the sketch.
6. Place marginal information on the sketch.
REFERENCES:
1. MCWP 3-11.3 Scouting and Patrolling
2. MCWP 3-15.3 Scout Sniping
PERFORMANCE STEPS:
1. Execute surveillance of an objective.
12-9
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCRP 2-15.3B Reconnaissance Reports Guide
2. MCWP 3-15.3 Scout Sniping
CONDITION: Given netting or mesh, canvas, garnish (jute, burlap, etc.), a set
of utilities, a cover, glue, sewing materials, one (1) pair of gloves, dyes,
paints, and fire retardant spray.
STANDARD: To blend the sniper and his equipment into the operational
environment.
PERFORMANCE STEPS:
1. Determine camouflage scheme to use (based on operational environment).
2. Attach base netting to clothing/cover.
3. Tie various garnish/jute to netting.
4. Camouflage boots.
5. Paint as needed.
6. Modify/upkeep ghillie suits, as necessary.
REFERENCES:
1. FM 20-3 Camouflage, Concealment, and Decoys
2. MCWP 3-11.3 Scouting and Patrolling
3. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Each sniper must have one (1) ghillie suit for the most likely area of
operations.
12-10
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Camouflage rifles (paint, field prep, garnish, natural vegetation).
2. Camouflage optics (paint, field prep, garnish, natural vegetation).
3. Camouflage radio (paint, field prep, garnish, natural vegetation).
4. Camouflage equipment (paint, field prep, garnish, natural vegetation).
REFERENCES:
1. FM 5-20 Camouflage
2. MCWP 3-11.3 Scouting and Patrolling
3. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. If appropriate materials are not available, the scout sniper will
utilize field expedient materials.
12-11
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Conduct map reconnaissance.
2. Continuously camouflage self, weapons, and equipment.
3. Use reference points/terrain features to stay oriented.
4. Move (navigate) to within designated range of targets/objectives using
proper movement techniques of crawls, walks, and turns.
5. Divide route into bounds/shorter legs while enroute.
6. Conduct SLLS - Stop, Look, Listen, Smell - as needed.
7. Select/Confirm a final firing position.
8. Withdraw from FFP.
9. Conduct debrief.
RELATED EVENTS:
INF-0317-3901
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Initial formal training includes having the sniper move across 600 to
1,200 meters/yards of varying types of terrain and establishes an FFP as
close as 200 yards of the objective.
12-12
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Detect threats/targets on objective.
2. Ensure fields of fire and observation.
3. Ensure FFP can support weapon system.
4. Consider lighting conditions.
5. Consider camouflage.
6. Consider backdrop.
7. Conceal/Secure non-essential equipment.
8. Ensure routes of egress.
9. Establish firing position.
10. Engage threats as required.
11. Improve FFP as required or needed and times permit or relocate to a more
suitable FFP as required.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A112 Cartridge, 7.62mm Blank M82 2
AA11 Cartridge, 7.62mm Long Range M118 LR 2
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Both hasty and deliberate final firing positions should be trained to.
12-13
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Select a hide position.
2. Determine type of hide.
3. Establish security.
4. Construct the hide.
5. Observe and report.
6. Engage targets from the hide using loop hole techniques.
7. Do not leave indications of sniper presence.
REFERENCES:
1. MCWP 3-11.3 Scouting and Patrolling
2. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
AA11 Cartridge, 7.62mm Long Range M118 LR 2
A112 Cartridge, 7.62mm Blank M82 2
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Both rural and urban hides of various types should be completed.
12-14
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Inspect the optics and accessories for defects and serviceability.
2. Operate optics.
3. Clean the optics (and lens).
4. Lubricate appropriate parts.
5. Disassemble and assemble optical equipment.
6. Report damaged/defective optics.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
2. TM 05539C-10/1 Sniper Rifle, 7.62mm, M40A1
3. TM 05539D-10/1 M40A3 Sniper Rifle
4. TM 11110A-OR Long Range Sniper Rifle (LRSR), USMC Special Application
Scoped Rifle (SASR) Caliber .50, M107
5. Scope / Optics Owner's Manual
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. If spotting scope body is camouflaged with paint, there is no
requirement to lubricate body or the scope.
2. The use of adhesive material, such as tape, is not authorized for use
on the surface of the binoculars for masking shine. A chemical reaction
will take place that will cause the rubber coating to deteriorate.
3. Applies to all optics T/E to a sniper platoon: Rifle scope, Binoculars,
Spotting scope, Laser Range finders.
12-15
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Handle the weapon safely.
2. Demonstrate the weapon carries and transports.
3. Demonstrate the proper assembly and positioning of the sling.
4. Load the rifle.
5. Unload the rifle
6. Clear the rifle.
7. Apply immediate action.
8. Apply remedial action.
9. Demonstrate weapons conditions.
10. Demonstrate sustained and rapid bolt manipulation.
11. Manipulate/Adjust bipod as needed.
12. Manipulate/Adjust stock as needed.
REFERENCES:
1. MCRP 3-01A Rifle Marksmanship
2. MCWP 3-15.3 Scout Sniping
3. TM 05539C-10/1 Sniper Rifle, 7.62mm, M40A1
4. TM 05539D-10/1 M40A3 Sniper Rifle
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A135 Cartridge, 7.62mm Dummy M63 5
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The weapon must be stored without tension on the firing pin spring.
Ensure the weapon is stored in a manner that will prevent damage to the
scope or the weapon, such as a climate-controlled armory with individual
12-16
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Place the weapon in Condition 4.
2. Disassemble the rifle.
3. Clean the rifle.
4. Lubricate the rifle.
5. Assemble the rifle.
6. Perform a function check.
7. Make entries in/review the gun book.
8. Ensure the rifle gun case and bag are clean and serviceable.
9. Inspect weapon.
10. Prepare weapon for field use.
11. Prepare and submit weapon for SAPM/LTI/PFI.
REFERENCES:
1. TM 05539D-10/1 M40A3 Sniper Rifle
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The scout sniper must know the sniper weapon systems characteristics
and understand the cycle of operation.
2. The scout sniper must know the proper torques for his assigned weapon.
3. This task applies to all T/E medium sniper weapon systems.
12-17
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Ensure the set screws are tight.
2. Place scope on initial elevation, and windage.
3. Achieve focus and remove parallax.
4. Assume a supported firing position.
5. Prepare for firing.
6. Fire a cold bore shot and record impact location.
7. Fire a 3 round group.
8. Record information in the data book.
9. Analyze data.
10. Apply required adjustments to scope.
11. Fire a second zeroing group (repeating steps 7 through 10).
12. Fire a 3 round shot group to confirm zero.
13. Make appropriate entries (round count) into gun book.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
AA11 Cartridge, 7.62mm Long Range M118 LR 10
RANGE/TRAINING AREA:
Facility Code 17550 Rifle Known Distance (KD) Range
12-18
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Handle the weapon safely.
2. Assume supported firing position.
3. Prepare a range card.
4. Assess weather conditions and estimate ballistics to hit targets and
adjust scope turrets accordingly.
5. Prepare for firing.
6. Engage targets as required at various ranges with 2 rounds per target.
7. Utilize sniper/observer dialogue.
8. Assess the situation.
9. Record and analyze information in data book.
10. Make appropriate gun book entries.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
2. TM 05539D-10/1 M40A3 Sniper Rifle
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
AA11 Cartridge, 7.62mm Long Range M118 LR 20
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Performance steps should be completed using various shooting positions.
2. A score of 10 is given for first round hits on target. A score of 8 is
given for corrected second round hits on targets when first round misses.
A score of 0 is given if both rounds miss.
3. Course of fire: 10 steel targets are placed from 100 to 1,000 yards.
Sniper has 2 rounds to engage each target.
0317-M40-2005: Qualify with the M40 series sniper rifle at known distances
(B)
12-19
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Assume a supported prone firing position.
2. Prepare for firing.
3. Confirm zero with a 3 round group before firing known distance
qualification course (not to be scored).
4. Determine ballistic settings based on weather and other conditions and
adjust scope turrets accordingly.
5. Utilize sniper/observer dialogue.
6. Determine method of engagement for present conditions.
7. Engage stationary targets at 300 (3 rounds), 500 (3 rounds), 600 (3
rounds), 700 (3 rounds), 800 (3 rounds), 900 (5 rounds), and 1,000 yards
(5 rounds).
8. Engage moving targets at 300, 500, 600, and 700 yards (2 rounds per yard
line).
9. Engage targets of limited exposure targets at 800 yards with 2 rounds.
10. Assess the situation.
11. Make appropriate entries into gun book and data book.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
AA11 Cartridge, 7.62mm Long Range M118 LR 38
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Each round is worth 1 point.
0317-M40-2006: Qualify with the M40 series sniper rifle at unknown distances
(B)
12-20
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Assume supported firing position.
2. Prepare a range card.
3. Assess weather conditions and estimate ballistics to hit targets and
adjust scope turrets accordingly.
4. Prepare for firing.
5. Engage targets as required at various ranges with 2 rounds per target.
6. Utilize sniper/observer dialogue.
7. Assess the situation.
8. Record and analyze information in data book.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
AA11 Cartridge, 7.62mm Long Range M118 LR 20
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. A score of 10 is given for first round hits on target. A score of 8 is
given for corrected second round hits on targets when first round misses.
A score of 0 is given if both rounds miss.
2. The minimum safe distance when engaging steel targets is 100 yards.
12-21
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Assume a supported prone firing position.
2. Prepare for firing.
3. Mount limited visibility device.
4. Operate controls and indicators.
5. Confirm zero before firing known distance qualification course using a 3
round group (not for score).
6. Determine ballistic settings based on weather and other conditions and
adjust scope turrets accordingly.
7. Utilize sniper/observer dialogue.
8. Engage stationary targets at 300, 500, and 600 yards (3 rounds for the 300
and 500 per yard line) and (5 rounds for the 600 yard line).
9. Engage moving targets based on observer's commands at distances of 300 and
500 (2 rounds per yard line).
10. Assess the situation.
11. Make appropriate entries into gun book and data book.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
AA11 Cartridge, 7.62mm Long Range M118 LR 38
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Minimum safe distance when engaging steel targets is 100 yards.
12-22
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Prepare for firing.
2. Determine ballistic settings based on weather and other conditions and
adjust scope turrets accordingly.
3. Utilize sniper/observer dialogue.
4. Engage stationary targets at 300 yards using the supported standing
position with 3 rounds.
5. Engage moving targets at 300 yards using the supported kneeling position
with 2 rounds.
6. Engage stationary targets at 500 yards using the supported kneeling
position with 3 rounds.
7. Engage moving targets at 500 yards using the supported sitting position
with 2 rounds.
8. Engage stationary targets at 600 yards using the supported position of
choice with 3 rounds.
9. Engage moving targets at 600 yards using the supported position of choice
with 2 rounds.
10. Engage stationary targets at 700 yards using position of choice with 5
rounds.
11. Engage stationary targets at 800 yards using position of choice with 5
rounds.
12. Engage stationary targets at 900 yards using position of choice with 5
rounds.
13. Engage stationary targets at 1000 yards using position of choice with 5
rounds.
14. Assess the situation after each target engagement.
15. Make appropriate entries into gun book and data book.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
AA11 Cartridge, 7.62mm Long Range M118 LR 35
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Prior to accomplishing this task, the sniper weapon system needs to be
zeroed.
12-23
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Record current cold bore data.
2. Record current zero data.
3. Analyze placement of cold bore shot to zero.
4. Identify the target.
5. Determine ballistics and weather to hit target.
6. Compare ballistics in MOA and Mils to achieve point of aim/point of impact
within one MOA.
7. Apply adjustments/holds to scope turrets.
8. Engage target.
9. Assess situation.
10. Make entries in data book/gun log.
REFERENCES:
1. FM 3-05.222 U.S. Army Special Forces Sniper Training and Employment
2. MCWP 3-15.3 Scout Sniping
3. TM 05539C-10/1 Sniper Rifle, 7.62mm, M40A1
4. TM 05539D-10/1 M40A3 Sniper Rifle
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
AA11 Cartridge, 7.62mm Long Range M118 LR 1
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Placement of a cold bore shot is determined after multiple cold bore
shots have been conducted and can then be determined. Once determined, it
is continually tracked to better achieve first round hits on threats.
12-24
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Assume a firing position.
2. Estimate ballistics and weather to hit target and apply to scope turrets.
3. Identify/Determine mediums (types of glass, brick, sandbags, vehicle body,
etc.) as may be found in combat environments.
4. Engage targets positioned behind mediums.
5. Assess situation/report information.
6. Make data book/gun log entries.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
2. MCWP 3-35.3 Military Operations on Urbanized Terrain (MOUT)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A606 Cartridge, Caliber .50 API MK211 Mod 10
AA11 Cartridge, 7.62mm Long Range M118 LR 10
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Medium should include various types of glass, bricks, sandbags, etc. as
found in combat environment.
2. Conducted at different distances/ranges.
3. DODIC A606 may be replaced with A552 where facility restrictions
prohibit the expenditure of A606.
12-25
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Assume a firing position.
2. Prepare a range card.
3. Measure/Determine angle to target.
4. Determine flat line distance.
5. Estimate ballistics and weather conditions to hit target.
6. Calculate steps 3 through 5 and apply data to scope turrets.
7. Utilize sniper observer dialogue.
8. Engage targets as required.
9. Assess the situation.
10. Make entries into data book/gun log.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A606 Cartridge, Caliber .50 API MK211 Mod 20
AA11 Cartridge, 7.62mm Long Range M118 LR 20
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. DODIC A606 may be replaced with A552 where facility restrictions
prohibit the expenditure of A606.
12-26
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Inspect device and components.
2. Install batteries.
3. Calibrate device(s).
4. Program constants.
5. Enter data.
6. Analyze firing solution.
7. Apply firing solution to the sniper weapon system.
8. Trouble shoot device(s) as required.
9. Perform maintenance as required.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
PERFORMANCE STEPS:
1. Rig the aircraft.
2. Brief aircrew.
3. Assume a firing position.
4. Estimate range.
5. Determine ballistics to hit target.
6. Utilize sniper observer dialogue (including aircrew via ICS).
7. Engage targets as required.
8. Assess the situation/report information.
9. Conduct debrief.
10. Make entries in data book/gun log as needed.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
12-27
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
AA11 Cartridge, 7.62mm Long Range M118 LR 20
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
Facility Code 17926 Aerial Gunnery Range
EQUIPMENT:
1. Aircraft
2. Live fire range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Used in support of Raids, TRAPs, and Maritime operations.
2. Sniper fire from an aircraft is NOT a 1 MOA and is accurate suppressive
fire.
3. Normally conducted with a low or variable power scope and semi-
automatic rifle.
PERFORMANCE STEPS:
1. Advise commander on sniper employment considerations.
2. Receive the commander's order.
3. Suggest recommendations/modifications for sniper employment.
4. Coordinate and prepare.
5. Brief mission.
6. Execute mission.
7. Make reports, as required.
8. Debrief mission.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
12-28
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Advise commander on sniper employment considerations.
2. Receive the commander's order.
3. Suggest recommendations/modifications for sniper employment.
4. Coordinate and prepare.
5. Brief mission.
6. Execute mission.
7. Make reports, as required.
8. Debrief mission.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
12-29
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Advise commander on sniper employment considerations.
2. Receive the commander's order.
3. Suggest recommendations/modifications for sniper employment.
4. Coordinate and prepare.
5. Brief mission.
6. Execute mission.
7. Make reports, as required.
8. Debrief mission.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
PERFORMANCE STEPS:
1. Research historical lessons.
2. Determine possible enemy sniper threats, training levels, capabilities,
and limitations.
3. Take/Advise on precautions for enemy snipers.
4. Consider use of deception.
5. Determine enemy sniper patterns and best methods to locate/eliminate enemy
snipers.
6. Execute immediate action for sniper fire when needed.
7. Utilize camouflage techniques to move/establish positions without being
detected.
8. Utilize observation/surveillance techniques to locate enemy snipers.
9. Utilize marksmanship skills to eliminate enemy snipers when needed.
10. Make reports and debrief as needed.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
12-30
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17962 MOUT Collective Training Facility (Small)
GRADES: SSGT
STANDARD: To receive, process, and disseminate reports from the scout sniper
teams.
PERFORMANCE STEPS:
1. Receive the order.
2. Conduct planning.
3. Issue the order.
4. Move the unit tentative location.
5. Select location.
6. Establish security.
7. Supervise the set up communications assets.
8. Setup briefing/situation folders.
9. Supervise the maintenance of a communications log.
10. Supervise the input of information into the situation log.
11. Process reports.
12. Perform situation update/brief at the ORP/SCC with the supported unit
commander, as required.
13. Displace the sniper control center as required.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. SCC is a tactical element that is forward deployed from the main unit
and in close enough proximity to the sniper teams to allow for
communications relay and possibly eyes on teams/objective area. SCC may
also be used as a fall-back position and QRF if needed.
2. SCC is normally used when there is an offensive mission requiring a
larger amount of reporting over longer distances to the Supported unit, and
multiple teams are employed.
12-31
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Handle the weapon safely.
2. Demonstrate the weapon carries and transports.
3. Demonstrate the proper assembly and positioning of the sling.
4. Load the rifle.
5. Unload the rifle
6. Clear the rifle.
7. Apply immediate action.
8. Apply remedial action.
9. Demonstrate weapons conditions.
10. Demonstrate sustained and rapid bolt manipulation.
11. Manipulate/Adjust bipod as needed.
12. Manipulate/Adjust stock as needed.
REFERENCES:
1. MCRP 3-01A Rifle Marksmanship
2. MCWP 3-15.3 Scout Sniping
3. TM 11110A-OR Long Range Sniper Rifle (LRSR), USMC Special Application
Scoped Rifle (SASR) Caliber .50, M107
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A560 Cartridge, Caliber .50 Dummy M2 5
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The weapon must be stored without tension on the firing pin spring.
Ensure the weapon is stored in a manner that will prevent damage to the
scope or the weapon, such as a climate-controlled armory with individual
racks or hooks per weapon system.
2. Five (5) dummy rounds will be used for this event.
12-32
NAVMC 3500.44
16 Sep 08
3. This task is intended to be used with any T/E heavy sniper weapon
system.
PERFORMANCE STEPS:
1. Place the weapon in Condition 4.
2. Disassemble the rifle.
3. Clean the rifle.
4. Lubricate the rifle.
5. Assemble the rifle.
6. Perform a function check.
7. Make entries in/review the gun book.
8. Ensure the rifle gun case and bag are clean and serviceable.
9. Inspect weapon.
10. Prepare weapon for field use.
11. Prepare and submit weapon for SAPM/LTI/PFI.
REFERENCES:
1. TM 11110A-OR Long Range Sniper Rifle (LRSR), USMC Special Application
Scoped Rifle (SASR) Caliber .50, M107
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The scout sniper must know the sniper weapon systems characteristics
and understand the cycle of operation.
2. The scout sniper must know the proper torques for his assigned weapon.
3. This task applies to all T/E heavy sniper weapon systems.
12-33
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Ensure the set screws are tight.
2. Place scope on initial elevation, and windage.
3. Achieve focus and remove parallax.
4. Assume a supported firing position.
5. Prepare for firing.
6. Fire a cold bore shot and record impact location.
7. Fire a 3 round group.
8. Record information in the data book.
9. Analyze data.
10. Apply required adjustments to scope.
11. Fire a second zeroing group (repeating steps 7 through 10).
12. Fire a 3 round shot group to confirm zero.
13. Make appropriate entries (round count) into gun book.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
2. TM 11110A-OR Long Range Sniper Rifle (LRSR), USMC Special Application
Scoped Rifle (SASR) Caliber .50, M107
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A606 Cartridge, Caliber .50 API MK211 Mod 10
RANGE/TRAINING AREA:
Facility Code 17550 Rifle Known Distance (KD) Range
12-34
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Establish communications with the maneuver unit.
2. Coordinate routes, checkpoints, and link-up with the supported unit.
3. Coordinate link-up procedures with the supported unit.
4. Establish a no-communications plan.
5. Move to link-up point and observe for enemy near link-up location.
6. Ensure security is established at the link-up point.
7. Establish communications with the supported unit.
8. Execute the signal plan (near, far, day, and night).
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
PERFORMANCE STEPS:
1. Write and issue a warning order.
2. Coordinate with adjacent units.
3. Coordinate with front line troops.
4. Write and issue a patrol order.
5. Conduct inspection and rehearsal (PCC/Is).
6. Lead exit of friendly lines.
7. Report exit of friendly lines.
8. Submit combat reports as required.
9. Lead actions on enemy contact.
10. Lead actions on the objective.
11. Request re-entry of friendly lines.
12. Lead patrol on re-entry of friendly lines.
13. Conduct a patrol report.
14. Upon completion of patrol report, conduct a debrief of all patrol
personnel.
REFERENCES:
1. MCWP 3-11.3 Scouting and Patrolling
2. MCWP 3-15.3 Scout Sniping
12-35
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task supports all types of combat and reconnaissance patrols.
PERFORMANCE STEPS:
1. Ensure the set screws are tight.
2. Place scope on initial elevation, and windage.
3. Achieve focus and remove parallax.
4. Assume a supported firing position.
5. Prepare for firing.
6. Zero using the bore sight method if applicable.
7. Zero using the 900 inch method if applicable.
8. Zero using the observation of impact method if applicable.
9. Fire a 3 round shot group to confirm zero.
10. Make appropriate entries into gun and data books.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A606 Cartridge, Caliber .50 API MK211 Mod 10
AA11 Cartridge, 7.62mm Long Range M118 LR 10
RANGE/TRAINING AREA:
Facility Code 17550 Rifle Known Distance (KD) Range
MISCELLANEOUS:
12-36
NAVMC 3500.44
16 Sep 08
ADMINISTRATIVE INSTRUCTIONS:
1. This task applies to any sniper weapon system.
2. DODIC A606 may be replaced with A552 where facility restrictions
prohibit the expenditure of A606.
PERFORMANCE STEPS:
1. Assume a firing position.
2. Detect the target.
3. Estimate weather conditions and ballistics needed to hit target and adjust
scope turrets accordingly.
4. Engage target based on observer's commands.
5. Assess the situation.
6. Record information in data book and gun book.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A606 Cartridge, Caliber .50 API MK211 Mod 10
L312 Signal, Illumination Ground White St 10
AA11 Cartridge, 7.62mm Long Range M118 LR 20
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
12-37
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This event is conducted without night sights.
2. This task is intended to be used with any T/E sniper weapon system.
3. DODIC A606 may be replaced with A552 where facility restrictions
prohibit the expenditure of A606.
PERFORMANCE STEPS:
1. Assume a supported firing position.
2. Prepare a range card.
3. Assess weather conditions and estimate ballistics to hit targets and
adjust scope turrets accordingly.
4. Mount the limited visibility device.
5. Prepare for firing.
6. Operate controls and indicators.
7. Engage targets at various ranges with 2 rounds per target.
8. Utilize sniper/observer dialogue.
9. Assess the situation.
10. Record and analyze information in data book.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A606 Cartridge, Caliber .50 API MK211 Mod 20
AA11 Cartridge, 7.62mm Long Range M118 LR 20
12-38
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Course of fire: 10 steel targets are placed from 100 to 600 yards.
Sniper has 2 rounds to engage each target.
2. Minimum safe distance when engaging steel targets is 100 yards.
3. DODIC A606 may be replaced with A552 where facility restrictions
prohibit the expenditure of A606.
PERFORMANCE STEPS:
1. Assume a supported firing position.
2. Prepare a range card and range estimate.
3. Prepare for firing.
4. Estimate ballistics and weather conditions to hit targets.
5. Determine a scope setting to mid range of targets.
6. Determine mil holds from mid range of targets.
7. Utilize sniper observer dialogue.
8. Engage targets as required using mil holds and rapid bolt manipulation.
9. Assess the situation after each target engagement.
10. Make entries in data book and gun log.
11. Handle the weapon safely.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
SUPPORT REQUIREMENTS:
12-39
NAVMC 3500.44
16 Sep 08
ORDNANCE:
DODIC Quantity
A606 Cartridge, Caliber .50 API MK211 Mod 20
AA11 Cartridge, 7.62mm Long Range M118 LR 20
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Course of fire: Two series of 5 steel targets each (spanning 500
yards) are placed from 100 to 800 yards. Sniper has 2 rounds per target to
achieve hits on target. Sniper will use 1 common setting on the scope
elevation and hold mils for remaining targets for each series.
2. DODIC A606 may be replaced with A552 where facility restrictions
prohibit the expenditure of A606.
0317-WPNS-2005: Engage targets with the sniper weapon system while wearing a
field protective mask (B)
PERFORMANCE STEPS:
1. Prepare for firing.
2. Don and clear the field protective mask.
3. Detect the target.
4. Present the rifle to the target, while assuming the firing position.
5. Engage target, based on observer's commands.
6. Assume the ready position.
7. Assess the situation during each target engagement.
8. Make appropriate entries in gun and data book.
REFERENCES:
1. MCWP 3-15.3 Scout Sniping
2. MCWP 3-37.2 MTTPs for NBC Protection
12-40
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A606 Cartridge, Caliber .50 API MK211 Mod 10
AA11 Cartridge, 7.62mm Long Range M118 LR 10
RANGE/TRAINING AREA:
Facility Code 17560 Sniper Field-Fire Range
EQUIPMENT:
1. Known distance range with appropriate targets
2. MOPP suits/NBC equipment
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. DODIC A606 may be replaced with A552 where facility restrictions
prohibit the expenditure of A606.
12-41
NAVMC 3500.44
16 Sep 08
CHAPTER 13
PARAGRAPH PAGE
13-1
NAVMC 3500.44
16 Sep 08
CHAPTER 13
13000. PURPOSE. This chapter details the individual events that pertain to
the community. These events are linked to a service-level Mission Essential
Tasks (MET). This linkage tailor’s individual training for the selected MET.
Each individual event provides an event title, along with the conditions
events will be performed under, and the standard to which the event must be
performed to be successful.
13001. ADMINISTRATIVE NOTES. T&R events are coded for ease of reference.
Each event has a 4-4-4 digit identifier. The first four digits represent the
occupational field or military occupational field (0331). This chapter
contains 0331 machine gunner individual training events. The second four
digits represent the functional or duty area. The last four digits represent
the level, and identifier number of the event. Every individual event has an
identifier number from 001 to 999.
Core Capabilities:
1. Carry out the orders of the machine-gun Team Leader.
2. Perform the tasks required of an Ammunition Man in a machine-gun team of
the machine-gun section of a weapons platoon.
3. Performs operator maintenance for and operates an M240 medium machinegun.
4. Performs operator maintenance for and is a proficient marksman with the
service rifle/carbine.
5. Engages targets with an M136 light anti-armor weapon and an M67 hand
grenade.
6. Emplaces and recovers an M18A1 Claymore mine.
7. Utilizes smoke grenades and pyrotechnics for signaling, illumination, and
screening.
13-2
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carries out the orders of the machine-gun Team Leader.
2. Performs the tasks required of a Gunner in a machine-gun team of the
machine-gun section of a weapons platoon.
3. Performs operator maintenance for and operates an M240 medium machinegun.
4. Performs operator maintenance for and is a proficient marksman with the
service rifle/carbine.
5. Engages targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
6. Emplaces and recovers an M18A1 Claymore mine.
7. Utilizes smoke grenades and pyrotechnics for signaling, illumination, and
screening.
8. Determines current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
9. Perform self-aid and buddy aid.
10. Performs individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
11. Communicate using proper communications procedures with organic wired
and wireless communications.
12. Performs fire and movement as an individual and as a member of a
machine-gun team.
13. Locates, closes with, suppresses, and destroys the enemy by fire and
maneuver.
14. Repels an enemy assault by fire and close combat.
13-3
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carries out the orders of the machine-gun Section Leader.
2. Performs the tasks required of a machine-gun Team Leader in a machine-gun
section of a weapons platoon.
3. Performs operator maintenance for and operates an M240 medium machinegun.
4. Performs operator maintenance for and is a proficient marksman with the
service rifle/carbine.
5. Engages targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
6. Emplaces and recovers an M18A1 Claymore mine.
7. Utilizes smoke grenades and pyrotechnics for signaling, illumination, and
screening.
8. Determines current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
9. Perform self-aid and buddy aid.
10. Performs individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
11. Communicate using proper communications procedures with organic wired
and wireless communications.
12. Performs fire and movement as an individual and as a member of a
machine-gun team.
13. Locates, closes with, suppresses, and destroys the enemy by fire and
maneuver.
14. Repels an enemy assault by fire and close combat.
Core Capabilities:
1. Carries out the orders of the machine-gun Section Leader.
2. Performs the tasks required of a Squad Leader in a machine-gun section of
a weapons platoon.
3. Performs operator maintenance for, and operates an M240 medium
machinegun.
4. Performs operator maintenance for, and is a proficient marksman with the
service rifle/carbine.
5. Engages targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
6. Emplaces and recovers a M18A1 Claymore mine.
7. Utilizes smoke grenades and pyrotechnics for signaling, illumination, and
screening.
8. Determines current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
9. Perform self-aid and buddy aid.
10. Performs individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
11. Communicate using proper communications procedures with organic wired
and wireless communications.
12. Controls the fire and movement of his machine-gun squad.
13-4
NAVMC 3500.44
16 Sep 08
13. Locates, closes with, suppresses, and destroys the enemy by fire and
maneuver.
14. Repels an enemy assault by fire and close combat.
_______________________________________________________________________
BILLET: Ammunition Man/Driver, Heavy Machine-gun Platoon, Weapons Company
The Ammunition Man/Driver prepares the ammunition and passes it to the
Assistant Gunner, provides local security for the machine-gun position
(ground or vehicle mounted), fills sandbags, and performs other duties as the
Squad Leader directs. He is also the squad truck driver and responsible for
preventive maintenance and repairs on the vehicle. When his duties do not
require him to be with the vehicle, he is used as an ammunition bearer. His
rank is Private thru Lance Corporal and his T/O weapon is the service
rifle/carbine.
Core Capabilities:
1. Carries out the orders of the machine-gun Squad Leader.
2. Performs the tasks required of an Ammunition Man and Driver in a
machinegun squad of the heavy machine-gun platoon of a weapons company.
3. Performs operator maintenance for and operates an M2 heavy machine-gun
and a MK19 heavy machine-gun.
4. Performs operator maintenance for and is a proficient marksman with the
service rifle/carbine.
5. Engages targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
6. Emplaces and recovers an M18A1 Claymore mine.
7. Utilizes smoke grenades and pyrotechnics for signaling, illumination, and
screening.
8. Determines current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
9. Perform self-aid and buddy aid.
10. Performs individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
11. Communicate using proper communications procedures with organic wired
and wireless communications.
12. Performs operator maintenance for and operates an M1043/44 hardback
HMMWV.
13. Performs fire and movement as an individual and as a member of a heavy
machine-gun squad.
14. Locates, closes with, suppresses, and destroys the enemy by fire and
maneuver.
15. Repels an enemy assault by fire and close combat.
_______________________________________________________________________
BILLET: Assistant Gunner, Heavy Machine-gun, Weapons Company
The heavy machine-gun Assistant Gunner carries out the orders of the Gunner
or Squad Leader. He is responsible for spotting rounds impact, making
accurate corrections for the Gunner, and for changing barrels on the
machinegun (M2). He is responsible for security. His rank is a Lance
Corporal. His T/O weapon is the service pistol.
Core Capabilities:
1. Carries out the orders of the machine-gun Squad Leader.
2. Performs the tasks required of an Assistant Gunner in a machine-gun squad
of the heavy machine-gun platoon of a weapons company.
3. Performs operator maintenance for and operates an M240 medium machinegun.
4. Performs operator maintenance for and is a proficient marksman with the
13-5
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carries out the orders of the machine-gun Squad Leader.
2. Performs the tasks required of a Gunner in a machine-gun squad of the
heavy machine-gun platoon of a weapons company.
3. Performs operator maintenance for and operates an M2 heavy machine-gun,
and a MK19 heavy machine-gun.
4. Performs operator maintenance for, and is a proficient marksman with the
service rifle/carbine and an M9 pistol.
5. Engages targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
6. Emplaces and recovers an M18A1 Claymore mine.
7. Utilizes smoke grenades and pyrotechnics for signaling, illumination, and
screening.
8. Determines current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
9. Perform self-aid and buddy aid.
10. Performs individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
11. Communicate using proper communications procedures with organic wired
and wireless communications.
12. Performs operator maintenance for and operates an M1043/44 hardback
HMMWV.
13. Performs fire and movement as an individual and as a member of a heavy
machine-gun squad.
13-6
NAVMC 3500.44
16 Sep 08
14. Locates, closes with, suppresses, and destroys the enemy by fire and
maneuver.
15. Repels an enemy assault by fire and close combat.
Core Capabilities:
1. Carries out the orders of the heavy machine-gun Section Leader.
2. Performs the tasks required of a Squad Leader in a heavy machine-gun
platoon of a weapons company.
3. Maintains the condition, care, and economical use of assigned personnel,
weapons, and equipment.
4. Performs operator maintenance for and operates an M2 heavy machine-gun,
and a MK19 heavy machine-gun.
5. Performs operator maintenance for and is a proficient marksman with the
service rifle/carbine.
6. Engages targets with an M136 or M72A7 light anti-armor weapon and an M67
hand grenade.
7. Emplaces and recovers an M18A1 Claymore mine.
8. Utilizes smoke grenades and pyrotechnics for signaling, illumination, and
screening.
9. Determines current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
10. Perform self-aid and buddy aid.
11. Performs individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
12. Communicate using proper communications procedures with organic wired
and wireless communications.
13. Performs operator maintenance for and operates an M1043/44 hardback
HMMWV.
14. Controls the fire and movement of his heavy machine-gun squad.
15. Locates, closes with, suppresses, and destroys the enemy by fire and
maneuver.
16. Repels an enemy assault by fire and close combat.
_______________________________________________________________________
BILLET: Section Leader, Heavy Machine-gun Platoon, Weapons Company
The heavy machine-gun Section Leader carries out the orders of the Platoon
Commander or assigned unit commander. He is responsible for his section at
all times, as well as the condition, care, and economical use of its weapons
(M2 .50 cal and MK19 40mm machine-guns), vehicles, and equipment. In combat,
he is also responsible for the tactical employment, fire discipline, fire
control, and employment of his machine-gun section as attachments to other
units, ground or vehicle mounted. His rank is a Sergeant. His T/O weapon is
the service rifle/carbine.
Core Capabilities:
1. Carries out the orders of the heavy machine-gun Platoon Commander.
13-7
NAVMC 3500.44
16 Sep 08
13-8
NAVMC 3500.44
16 Sep 08
13-9
NAVMC 3500.44
16 Sep 08
Conduct the Night Vision Device (NVD) Course for the 13-39
0331-MK19-1109
MK19 (Gunnery Table III) (B)
Medium Machinegun
Perform operator maintenance for a medium machinegun 13-40
0331-MMG-1001
and associated components (D)
0331-MMG-1002 Mount a medium machinegun on an M122 tripod (B) 13-41
0331-MMG-1003 Mount a medium machinegun on a tactical vehicle (B) 13-41
0331-MMG-1004 Load a medium machinegun (cover raised) (B) 13-42
0331-MMG-1005 Load a medium machinegun (cover closed) (B) 13-43
0331-MMG-1007 Change a barrel on a medium machinegun (C) 13-44
0331-MMG-1013 Perform immediate action on a medium machinegun (A) 13-44
0331-MMG-1014 Perform remedial action on a medium machinegun (B) 13-45
0331-MMG-1101 Zero a medium machinegun (B) 13-46
0331-MMG-1102 Field zero a medium machinegun (B) 13-47
Zero a Night Aiming Device (NAD) for a medium 13-48
0331-MMG-1103
machinegun (B)
0331-MMG-1104 Zero the AN/PVS-17C for a medium machinegun (B) 13-50
0331-MMG-1105 Zero the AN/PAS-13B(V)2 for a medium machinegun (B) 13-51
Conduct the 12.7-meter Basic Course for the medium 13-52
0331-MMG-1106
machinegun (Gunnery Table I) (B)
Conduct the Multiple Engagement Course for the medium 13-53
0331-MMG-1107
machinegun (Gunnery Table II) (B)
Conduct the Range Card Course for the medium 13-55
0331-MMG-1108
machinegun (Gunnery Table III) (B)
Conduct the Night Vision Device (NVD) Course for the 13-56
0331-MMG-1109
medium machinegun (Gunnery Table IV) (B)
Conduct the 12.7-meter Bipod Course for the medium 13-57
0331-MMG-1110
machinegun (Gunnery Table (V) (B)
Conduct the Bipod Multiple Engagement Course for the 13-59
0331-MMG-1111
medium machinegun (Gunnery Table VI) (B)
2000 Level Events
Employment
0331-EMPL-2001 Select a machinegun firing position (D) 13-61
0331-EMPL-2002 Inspect a machinegun fighting position (D) 13-61
0331-EMPL-2003 Lay the machinegun for overhead fire (B) 13-63
Direct the employment of a machinegun 13-63
0331-EMPL-2004
team/squad/section in a direct fire role (B)
Lay a machinegun for Direction and Elevation using an 13-64
0331-EMPL-2005
M2 Compass (B)
Lay a machinegun for Direction and Elevation using the 13-65
0331-EMPL-2006
M1A2 gunner's quadrant (B)
0331-EMPL-2008 Direct the acquisition of machinegun targets (B) 13-66
0331-EMPL-2009 Issue machinegun fire commands (B) 13-67
M2 - Browning .50 Caliber Machinegun
Conduct the Vehicle-Mounted Course for an M2 (Gunnery 13-68
0331-M2-2110
Table V) (B)
MK-19 – 40mm Grenade Machinegun
Conduct the Vehicle-Mounted Course for a MK19 (Gunnery 13-69
0331-MK19-2110
Table IV) (B)
13-10
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Select position.
2. Trace outline of fighting position.
3. Construct firing platform.
4. Excavate fighting position.
5. Prepare alternate/supplementary positions.
6. Improve position as needed.
RELATED EVENTS:
0331-EMPL-1002 0331-EMPL-2002 0331-EMPL-2001
0331-EMPL-1003
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17620 40MM (Grenade) Machine Gun Qualification Range
13-11
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Determine type of range card to be created (FPL or FPL).
2. Designate Target Reference Points for the range card.
3. Illustrate current position on the range card.
4. Illustrate required gun data on the range card.
5. Illustrate sectors of fire on the range card.
6. Determine scale of the sketch and enter all necessary marginal information
on the range card.
7. Submit copy of prepared range card to higher headquarters.
RELATED EVENTS:
0331-EMPL-1003 0331-EMPL-2002 0331-EMPL-2001
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. FM 3-22.68 Light and Medium machineguns
4. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
PERFORMANCE STEPS:
1. Fire Final Protective Fires (FPF) in accordance with the range card.
2. Adjust fire from target reference points onto targets of opportunity in
accordance with established target precedence.
3. Re-lay gun back onto FPF.
RELATED EVENTS:
0331-EMPL-1001 0331-EMPL-1002 0331-EMPL-1006
13-12
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. FM 3-22.68 Light and Medium machineguns
4. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A131 Cartridge, 7.62mm 4 Ball M80/1 Trace 200
B542 Cartridge, 40mm HEDP M430/M430A1 Lin 64
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17582 Automated Multipurpose Machine Gun Range (MPMG)
Facility Code 17580 Machine Gun Transition Range
PERFORMANCE STEPS:
1. Engage a target with a machinegun in accordance with fire command.
2. Make corrections as directed by the unit leader.
RELATED EVENTS:
0331-MK19-1005 0331-MMG-1006 0331-MMG-1***
0331-M2-1007 0331-EMPL-1007
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. FM 3-22.68 Light and Medium machineguns
4. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
13-13
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A576 Cartridge, Caliber .50 4 API M8/1 AP 100
A131 Cartridge, 7.62mm 4 Ball M80/1 Trace 100
B542 Cartridge, 40mm HEDP M430/M430A1 Lin 64
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17582 Automated Multipurpose Machine Gun Range (MPMG)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task can be accomplished with the following additional ordnance:
DODIC
BA12 Cartridge, 40mm Training Practice M385 linked
B584 Cartridge, 40mm Flash Training Practice M918
PERFORMANCE STEPS:
1. Clear the M2 heavy machinegun.
2. Disassemble the M2 heavy machinegun.
3. Clean/inspect the M2 heavy machinegun.
4. Lubricate the M2 heavy machinegun.
5. Assemble the M2 heavy machinegun.
6. Perform function check.
7. Inspect an M3 tripod.
8. Clean an M3 tripod.
9. Lubricate an M3 tripod.
10. Inspect the M2 SL-3 components.
11. Clean the M2 SL-3 components.
12. Lubricate the M2 SL-3 components.
13-14
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 3-22.65 Browning Machine Gun, M2
2. SL-3-02498B Machine Gun, Caliber .50, Browning, M2
3. TM 02498A-10/2 Operator's Manual, Machine Guns, Caliber .50; Browning, M2
Heavy Barrel
PERFORMANCE STEPS:
1. Inspect the M2 heavy machinegun and associated components for
serviceability.
2. Emplace the M3 tripod in the desired location.
3. Attach the pintle to the M2 receiver.
4. Attach the M2 heavy machinegun receiver to the M3 tripod.
5. Attach the barrel to the M2 heavy machinegun receiver.
6. Check headspace and timing.
RELATED EVENTS:
0331-M2-1003 0331-M2-1001
REFERENCES:
1. FM 3-22.65 Browning Machine Gun, M2
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
13-15
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Inspect the M2 heavy machinegun and associated components for
serviceability.
2. Attach the appropriate vehicle mount to the tactical vehicle.
3. Attach the mounting adapter and pintle to the M2 receiver.
4. Attach the M2 heavy machinegun receiver to the vehicle mount.
5. Attach the barrel to the M2 heavy machinegun receiver.
6. Attach the ammo tray to the selected vehicle mount.
7. Check headspace and timing.
RELATED EVENTS:
0331-M2-1002 0331-M2-1001
REFERENCES:
1. FM 21-305 Manual for Wheeled Vehicle Driver
2. FM 3-22.65 Browning Machine Gun, M2
3. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
4. TM 2320-10/6A Truck Utility 1/4 Ton 4X4
SUPPORT REQUIREMENTS:
EQUIPMENT:
1. Appropriate tactical vehicle.
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The following components can be used to mount the M2 Heavy Machinegun:
MK64 cradle, MK 93 cradle, MK 175 vehicle mount, universal pintle adapter
(UPA), and the M4 pedestal mount.
PERFORMANCE STEPS:
1. Clear the M2 machinegun.
2. Conduct barrel check to ensure the barrel is locked to the barrel
extension.
13-16
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
0331-M2-1001 0331-M2-1007 0331-M2-1003
0331-M2-1002
REFERENCES:
1. FM 3-22.65 Browning Machine Gun, M2
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 02498A-10/2 Operator's Manual, Machine Guns, Caliber .50; Browning, M2
Heavy Barrel
PERFORMANCE STEPS:
1. Ensure bolt is forward, the cover is raised, and the weapon is in the
automatic fire mode.
2. Place ammunition belt in the feedway until the first round is held by the
belt holding pawls.
3. Close the cover (Condition 3).
4. Charge the weapon once (Condition 2, "half-load").
5. Charge the weapon again (Condition 1).
RELATED EVENTS:
0331-M2-1007 0331-M2-1009 0331-M2-1008
REFERENCES:
1. FM 3-22.65 Browning Machine Gun, M2
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 02498A-10/2 Operator's Manual, Machine Guns, Caliber .50; Browning, M2
Heavy Barrel
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A560 Cartridge, Caliber .50 Dummy M2 10
13-17
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
PERFORMANCE STEPS:
1. Ensure bolt is forward, the cover is closed, and the weapon is in the
automatic fire mode.
2. Insert ammunition belt in the feedway until the first round is engaged by
the belt feeding pawls. (Condition 3)
3. Charge the weapon once. (Condition 2, "half-load")
4. Charge the weapon again. (Condition 1)
RELATED EVENTS:
0331-M2-1002 0331-M2-1003 0331-M2-1009
0331-M2-1008 0331-M2-1007
REFERENCES:
1. FM 3-22.65 Browning Machine Gun, M2
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 02498A-10/2 Operator's Manual, Machine Guns, Caliber .50; Browning, M2
Heavy Barrel
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A560 Cartridge, Caliber .50 Dummy M2 10
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
13-18
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Announce "MISFIRE."
2. Wait five seconds for a possible hang fire.
3. Recharge weapon, watching for feeding and ejecting, if weapon
feeds/ejects, attempt to fire.
4. If weapon does not feed or eject, repeat step 3 one additional time.
5. If weapon fails to feed or eject, perform remedial action.
RELATED EVENTS:
0331-M2-1005 0331-M2-1009 0331-M2-1007
0331-M2-1006
REFERENCES:
1. FM 3-22.65 Browning Machine Gun, M2
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 02498A-10/2 Operator's Manual, Machine Guns, Caliber .50; Browning, M2
Heavy Barrel
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A560 Cartridge, Caliber .50 Dummy M2 10
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
13-19
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Place weapon in single shot mode.
2. Make hot/cold barrel determination.
3. If barrel is hot, wait 15 minutes, and perform cold barrel procedures.
4. If cold barrel, open cover, clear source of ammunition.
5. Disassemble and inspect weapon and ammunition.
6. Assemble the weapon and perform a function check.
RELATED EVENTS:
0331-M2-1005 0331-M2-1008 0331-M2-1007
0331-M2-1006
REFERENCES:
1. FM 3-22.65 Browning Machine Gun, M2
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 02498A-10/2 Operator's Manual, Machine Guns, Caliber .50; Browning, M2
Heavy Barrel
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A560 Cartridge, Caliber .50 Dummy M2 10
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
13-20
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Put the gun in Condition 1.
2. Lay the gun on the first paster, ensuring that the sights are aligned and
at 6 o'clock on the paster.
3. Fire 3 rounds, one at a time, ensuring that the same 6 o'clock sight
picture is regained on the paster between shots.
4. Put the gun in Condition 4.
5. Move downrange to observe the shot group and mark the center of the group.
6. If the center of the shot group is in the center of the paster, the gun is
zeroed.
7. If the center of the shot group is not in the center of the paster, the
rear peep sight aperture needs adjustment.
8. Make the necessary sight adjustments.
9. Put the gun in condition 1.
10. Fire another 3-round shot group (one round at a time) at the same paster.
11. Put the gun in Condition 4.
12. Move back downrange to observe the shot group. Make appropriate sight
adjustments.
13. Continue the above procedures until the shot group is centered in the
paster.
14. Confirm zero by firing a 3-round shot group at the second paster.
15. Once the zero is confirmed, zero out the deflection scale.
RELATED EVENTS:
0331-MMG-1101 0331-M2-1102 0331-M2-1107
0331-M2-1106 0331-M2-1103
REFERENCES:
1. FM 3-22.65 Browning Machine Gun, M2
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A576 Cartridge, Caliber .50 4 API M8/1 AP 12
RANGE/TRAINING AREA:
Facility Code 17510 Basic 10M-25M Firing Range (Zero)
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
13-21
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Estimate the range to target.
2. Set the rear sight elevation to the estimated range and lay the gun on the
target (sights at 6 o'clock to the target).
3. Fire a single round while the assistant gunner observes the impact.
4. Manipulate the T&E mechanism until the impact is adjusted onto the target.
5. Once the impact is on target, fire a confirmation round.
6. Maintain position and shoulder pressure ensuring that the lay of the gun
remains the same while sight adjustments are made for windage and
elevation.
7. Once the sights are aligned on the target, fire a single confirmation
round to verify the field zero.
8. When the zero is confirmed, adjust the windage scale so that the index
line is zeroed on the windage scale.
RELATED EVENTS:
0331-MMG-1102 0331-M2-1108 0331-M2-1107
0331-M2-1102
REFERENCES:
1. FM 3-22.65 Browning Machine Gun, M2
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A576 Cartridge, Caliber .50 4 API M8/1 AP 5
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17580 Machine Gun Transition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Since the zeroing calibrates the rear sight for all targets within the
effective range of the machinegun, the estimated range to any target can be
placed on the rear sight and, with proper range estimation and a 6 o'clock
sight picture, the initial burst should be on target.
2. DODIC A571 may be substituted if available for this event.
13-22
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Select a suitable hard target at a known range (400 - 600 meters).
2. Select a stable position for the M3 tripod.
3. Using the M2 rear leaf sight assembly, adjust the night sight aperture to
the proper range setting. Night sight in on the target by adjusting the
T&E mechanism.
4. Without disturbing weapon alignment, lower the left night sight assembly.
Install the night sight on the gun.
5. Place the night sight in operation and make tube and reticle brightness
control adjustments.
6. Press the spade grips down and to the right. Use a coin or edge of a
small arms cartridge case. Turn the elevation adjustment actuator and
azimuth adjustment actuator to align the center mass of the target with
the aiming mark at the 400-meter mark of the M2 scale.
7. Fire one or two rounds to settle the night sight on the weapon.
8. Retighten the lower left-hand locking lever of the mounting bracket first,
then tighten the two top locking levers.
9. Align the target with the aiming mark by using the T&E mechanism as
necessary. Fire one round at the target. If the round hits the target go
to step 10. If the round does not hit the target, adjust the elevation
and azimuth adjustment actuators until you hit the target.
10. Note where the two green illuminated leveling lines and reference
indicators cross the black fixed grid.
11. Record the zero data in the gun's weapon record book.
RELATED EVENTS:
0331-MMG-1103 0331-MMG-1104 0331-MMG-1109
0331-MK19-1109 0331-MMG-1105
REFERENCES:
1. FM 3-22.65 Browning Machine Gun, M2
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 11-5855-214-10 Operator's Manual, Night Vision Sight, Crew-Served
Weapon AN/TVS-5
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A576 Cartridge, Caliber .50 4 API M8/1 AP 7
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
13-23
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. DODIC A571 may be substituted if available for this event.
0331-M2-1106: Conduct the 10-meter Basic Course for the M2 (Gunnery Table I)
(B)
PERFORMANCE STEPS:
1. Prepare two (2) 6-round belts of ammunition.
2. Engage pasters in Bank 3-4 (one paster each) with one 6-round burst each.
3. Prepare a 30-round belt of ammunition.
4. Engage pasters in Bank 5-6 (5 pasters total) with one 6-round burst each,
using the traverse and search mechanism for each subsequent burst.
5. Prepare a 48-round belt of ammunition.
6. Engage pasters in Bank 7-8 (8 pasters total) with one 6-round burst each,
using the traverse and search mechanism as appropriate for each subsequent
burst.
7. Prepare four (4) 6-round belts of ammunition.
8. In a time limit of 45 seconds, engage pasters in Bank 1-4 (4 pasters
total) with one 6-round burst each. No manipulation of the T&E is
required other than to obtain proper sight alignment and picture before
firing the 6-round bursts.
9. Prepare a 30-round belt of ammunition.
10. In a time limit of 30 seconds, engage pasters in Bank 5-6 (5 pasters
total) with one 6-round burst each, using the traverse and search
mechanism for each subsequent burst.
11. Prepare a 48-round belt of ammunition.
12. In a time limit of 45 seconds, engage pasters in Bank 7-8 (8 targets
total) with one 6-round burst each, using the traverse and search
mechanism as appropriate for each subsequent burst.
PREREQUISITE EVENTS:
0331-M2-1101
RELATED EVENTS:
0331-MMG-1106 0331-M2-2110 0331-M2-1108
0331-M2-1107
REFERENCES:
1. FM 3-22.65 Browning Machine Gun, M2
13-24
NAVMC 3500.44
16 Sep 08
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A576 Cartridge, Caliber .50 4 API M8/1 AP 192
RANGE/TRAINING AREA:
Facility Code 17510 Basic 10M-25M Firing Range (Zero)
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Total possible score for Table I is 102 points, with a minimum of 70
points for a passing score.
2. Only rounds that impact on or within the line of the paster will be
scored.
3. Each hit is scored as one point.
4. Only 6 rounds per paster will be scored, for a total score of 6 points
per paster.
5. Table I score does not constitute complete qualification for the medium
machinegun gunner. Table II (Transition Course) must also be fired, and
the two scores added together in order to achieve a qualification score.
0331-M2-1107: Conduct the Transition Course for an M2 (Gunnery Table II) (B)
PERFORMANCE STEPS:
1. Prepare a belt of 252 rounds of ammunition.
2. In a time limit of 20 seconds, engage a 4-silhouette target bank at 700
meters.
3. In a time limit of 20 seconds, engage a 4-silhouette target bank at 600
meters.
4. In a time limit of 20 seconds, engage a 4-silhouette target bank at 900
meters.
5. In a time limit of 20 seconds, engage a stationary vehicle silhouette
target at 1000 meters.
13-25
NAVMC 3500.44
16 Sep 08
PREREQUISITE EVENTS:
0331-M2-1101 0331-M2-1106 0331-M2-1102
RELATED EVENTS:
0331-M2-2110 0331-M2-1108
REFERENCES:
1. FM 3-22.65 Browning Machine Gun, M2
2. MCWP 3-15.1_ ** Machineguns and Machinegun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A576 Cartridge, Caliber .50 4 API M8/1 AP 252
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. All target engagements are conducted at the sustained rate using 6-8
round bursts.
2. The ammunition belt of 252 rounds allows for an allotment of two 6-8
round bursts for each of the 21 targets. Any leftover bursts (resulting
from first-burst hits) may be applied to a target that was not hit with the
first or second burst, but no more than three bursts are allowed for any
target.
13-26
NAVMC 3500.44
16 Sep 08
0331-M2-1108: Conduct the Range Card Course for an M2 (Gunnery Table III) (B)
PERFORMANCE STEPS:
1. With a 48-round belt of ammunition, register the Final Protective Line
(FPL) using 12-round bursts.
2. Record the T&E data for the FPL on the range card.
3. With a 48-round belt of ammunition, register the two 4-silhouette target
banks (one at 600 and one at 700 meters), and the two stationary vehicle
silhouette targets (one at 900 and one at 1000 meters).
4. Record the T&E data for the point targets on the range card.
5. With a 24-round belt of ammunition, register the two linear targets; one
shallow target at 600 meters, and one deep target centered at 800 meters.
6. Record the T&E data for the linear targets on the range card.
7. With a 12-round belt of ammunition, engage the two linear targets using
T&E data from the range card.
8. With a 24-round belt of ammunition, engage the four point targets using
T&E data from the range card.
9. With a 12-round belt of ammunition, fire the final protective line using
T&E data from the range card in a single burst.
13-27
NAVMC 3500.44
16 Sep 08
PREREQUISITE EVENTS:
0331-M2-1101 0331-M2-1107 0331-M2-1106
0331-M2-1102
RELATED EVENTS:
0331-MMG-1101 0331-MMG-1107 0331-MMG-1106
0331-MMG-1102
REFERENCES:
1. FM 3-22.65 Browning Machine Gun, M2
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A576 Cartridge, Caliber .50 4 API M8/1 AP 168
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Performance steps 1-6 are for the registration of targets and the
preparation of the range card.
2. Performance steps 7-9 are engagement and are scored as follows: 1 point
for each target hit, with a total possible of 7 points.
3. When firing the FPL, the burst must achieve grazing fire, as evidenced
by the beaten zone striking a reference point determined during
registration.
4. A passing score on this gunnery table is 5 out of 7.
0331-M2-1109: Conduct the Night Vision Device (NVD) Course for the M2
(Gunnery Table IV) (B)
PERFORMANCE STEPS:
1. Prepare a belt of 144 rounds.
13-28
NAVMC 3500.44
16 Sep 08
PREREQUISITE EVENTS:
0331-M2-1103
RELATED EVENTS:
0331-M2-1108 0331-M2-1106 0331-M2-1107
REFERENCES:
1. FM 3-22.65 Browning Machine Gun, M2
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A576 Cartridge, Caliber .50 4 API M8/1 AP 144
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The ammunition load allows for an allotment of two 6-round bursts for
each of the 12 targets. Any leftover bursts (resulting from a first-burst
hit) may be applied to a target that was not hit with the first or second
burst, but no more than three bursts are allowed for any target.
2. Scoring criteria: 3 points for 1st burst hits, 2 points for 2nd burst
hits, 1 point for 3rd burst hits, minus one (-1) point if target is not hit
within the first three bursts.
3. 24 points are required to achieve a passing score on Table IV.
13-29
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Clear a MK-19 heavy machinegun.
2. Disassemble a MK-19 heavy machinegun.
3. Clean/inspect a MK-19 heavy machinegun.
4. Lubricate a MK-19 heavy machinegun.
5. Assemble a MK-19 heavy machinegun.
6. Perform a function check.
7. Inspect an M3 tripod.
8. Clean an M3 tripod.
9. Lubricate an M3 tripod.
10. Inspect an MK-64/93 cradle.
11. Clean an MK-64/93 cradle.
12. Lubricate an MK-64/93 cradle.
13. Inspect MK-19 SL-3 components.
14. Clean MK-19 SL-3 components.
15. Lubricate MK-19 SL-3 components.
REFERENCES:
1. SL-3-08521A Machine Gun, 40mm, MK-19, Mod 3
2. TM 08521A-10/1A Operator's Manual, Machinegun 40mm, MK19 Mod 3
PERFORMANCE STEPS:
1. Inspect the MK-19 heavy machinegun and associated components for
serviceability.
2. Emplace the M3 tripod in the desired location.
3. Attach the selected cradle to the M3 tripod.
4. Attach the MK-19 heavy machinegun to the cradle.
5. Attach associated components.
13-30
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
0331-MK19-1003
REFERENCES:
1. FM 3-22.27 MK19
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 08521A-10/1A Operator's Manual, Machinegun 40mm, MK19 Mod 3
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The following cradles are available: MK64 Cradle & MK93 Cradle.
PERFORMANCE STEPS:
1. Inspect the MK-19 heavy machinegun and associated components for
serviceability.
2. Attach the selected vehicle mount to the tactical vehicle.
3. Attach the MK-19 heavy machinegun receiver to the vehicle mount.
4. Attach associated components.
RELATED EVENTS:
0331-MK19-1002
REFERENCES:
1. FM 3-22.27 MK19
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 08521A-10/1A Operator's Manual, Machinegun 40mm, MK19 Mod 3
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The following cradles are available: MK64 Cradle & MK93 Cradle.
13-31
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Ensure bolt is forward and weapon is on safe.
2. Raise cover.
3. Insert the first round into the feeder, female link first.
4. Push the round across the primary feed pawl.
5. Move the feed slide assembly to the left.
6. Gently close the cover. (Condition 3) Weapon on safe.
7. Charge the weapon once. (Condition 2, "half-load") Weapon on safe.
8. Charge the weapon again. (Condition 1, "full-load") Weapon on safe.
RELATED EVENTS:
0331-MK19-1005 0331-MK19-1007 0331-MK19-1006
REFERENCES:
1. FM 3-22.27 MK19
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 08521A-10/1A Operator's Manual, Machinegun 40mm, MK19 Mod 3
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B472 Cartridge, 40mm Dummy M922 10
B542 Cartridge, 40mm HEDP M430/M430A1 Lin 10
RANGE/TRAINING AREA:
Facility Code 17610 Grenade Launcher Range
Facility Code 17620 40MM (Grenade) Machine Gun Qualification Range
13-32
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Announce "MISFIRE." (During peacetime, clear the immediate area of non-
essential personnel)
2. Wait ten seconds for possible hang fire.
3. Pull bolt to the rear; catch round as it is ejected.
4. Inspect ejected round for dented primer. If primer is dented place round
in dud pit with the projectile facing downrange.
5. Attempt to fire.
6. If weapon fails to fire, place on safe, wait ten seconds.
7. Pull bolt to the rear; catch round as it is ejected.
8. Open cover, unload and clear the weapon, and perform remedial action.
RELATED EVENTS:
0331-MK19-1004 0331-MK19-1007 0331-MK19-1005
REFERENCES:
1. FM 3-22.27 MK19
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. SL-3-08521A Machine Gun, 40mm, MK-19, Mod 3
4. TM 08521A-10/1A Operator's Manual, Machinegun 40mm, MK19 Mod 3
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B472 Cartridge, 40mm Dummy M922 10
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17620 40MM (Grenade) Machine Gun Qualification Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Event is instructor/scenario driven.
13-33
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Open cover, clear source of ammunition.
2. Disassemble and perform a detailed inspection of weapon and ammunition.
3. Assemble the weapon and perform a function check.
RELATED EVENTS:
0331-MK19-1004 0331-MK19-1006 0331-MK19-1005
REFERENCES:
1. FM 3-22.27 MK19
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. SL-3-08521A Machine Gun, 40mm, MK-19, Mod 3
4. TM 08521A-10/1A Operator's Manual, Machinegun 40mm, MK19 Mod 3
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B472 Cartridge, 40mm Dummy M922 10
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17620 40MM (Grenade) Machine Gun Qualification Range
PERFORMANCE STEPS:
1. Set the windage to mechanical zero.
2. Estimate the range to target.
3. Set the rear sight elevation to the estimated range and lay the gun on the
target (sights at 6 o'clock to the target).
4. Fire a single round while the assistant gunner observes the impact.
5. Manipulate the T&E mechanism until the impact is adjusted onto the target.
6. Once the impact is on target, fire a confirmation round.
7. Maintain position and shoulder pressure ensuring that the lay of the gun
13-34
NAVMC 3500.44
16 Sep 08
remains the same while sight adjustments are made for windage and
elevation.
8. Once the sights are aligned on the target, fire a single confirmation
round to verify the field zero.
9. When the zero is confirmed, adjust the windage scale so that the top right
edge of the sight slide corresponds with the appropriate range.
RELATED EVENTS:
0331-MMG-1102 0331-M2-1102 0331-MK19-1106
0331-M2-1108 0331-MK19-2110 0331-M2-1107
0331-MK19-1108
REFERENCES:
1. FM 3-22.27 MK19 40MM Grenade Machine Gun MOD 3
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B542 Cartridge, 40mm HEDP M430/M430A1 Lin 5
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17580 Machine Gun Transition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Since the zeroing calibrates the rear sight for all targets within the
effective range of the machinegun, the estimated range to any target can be
placed on the rear sight and, with proper range estimation and a 6 o'clock
sight picture, the initial burst should be on target.
PERFORMANCE STEPS:
1. Select a suitable hard target at a known range (400 meters).
2. Select a stable position for the M3 tripod.
3. Press the MK19 rear night sight lock while raising the weapon's night
13-35
NAVMC 3500.44
16 Sep 08
sight frame. Adjust the night sight aperture to the proper range setting
and sight in on the target by adjusting the T&E mechanism.
4. Without disturbing weapon alignment, press the night sight lock and lower
the MK19's night sight frame. Install the AN/TVS-5A Night Sight on the
gun.
5. Place the night sight in operations and adjust tube and reticle brightness
control adjustments.
6. Press the weapon's control grips down and to the right and hold. Use a
coin or a small arms cartridge case. Turn the elevation and azimuth
adjustment actuators until the center mass of the target is aligned with
the aiming point at the 400-meter mark.
7. Charge the weapon. Fire one or two rounds to settle the night sight on
the weapon.
8. Retighten the lower left-hand locking lever of the mounting bracket first,
then tighten the two top locking levers.
9. Align the target with the 400-meter aiming mark by using the T&E mechanism
as necessary. Fire one round at the target. If the round hits the target,
go to step 10. If the round does not hit the target, adjust the elevation
and azimuth adjustment actuators until you hit the target.
10. Note where the two green illuminated leveling lines and reference
indicators cross the black fixed grid.
11. Record the zero data in the gun's weapon record book.
PREREQUISITE EVENTS:
0331-MK19-1102
RELATED EVENTS:
0331-MMG-1103 0331-M2-1103 0331-MMG-1104
0331-M2-1109 0331-MK19-1109 0331-MMG-1109
0331-MMG-1105
REFERENCES:
1. FM 3-22.27 MK19 40MM Grenade Machine Gun MOD 3
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 11-5855-214-10 Operator's Manual, Night Vision Sight, Crew-Served
Weapon AN/TVS-5
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B542 Cartridge, 40mm HEDP M430/M430A1 Lin 5
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
0331-MK19-1106: Conduct the Basic Course for the MK19 (Gunnery Table I) (B)
13-36
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Prepare a 60-round belt of ammunition.
2. Engage a 4-silhouette target bank at 400 meters.
3. Engage a 4-silhouette target bank at 600 meters.
4. Engage a stationary vehicle silhouette at 1000 meters.
5. Engage a 4-silhouette target bank at 700 meters and a stationary vehicle
silhouette at 900 meters.
6. Engage a stationary vehicle silhouette at 1000 meters and a 4-silhouette
target bank at 600 meters.
7. While in a CBRN posture wearing a field protective mask w/hood and gloves,
engage a 4-silhouette target bank at 400 meters.
8. While in a CBRN posture wearing a field protective mask w/hood and gloves,
engage a stationary vehicle silhouette at 900 meters and a 4-silhouette
target bank at 700 meters.
9. Prepare a 60-round belt of ammunition.
10. In a time limit of 20 seconds, engage a 4-silhouette target bank at 400
meters.
11. In a time limit of 20 seconds, engage a 4-silhouette target bank at 600
meters.
12. In a time limit of 20 seconds, engage a stationary vehicle silhouette at
1000 meters.
13. In a time limit of 35 seconds, engage a 4-silhouette target bank at 700
meters and a stationary vehicle silhouette at 900 meters.
14. In a time limit of 35 seconds, engage a stationary vehicle silhouette at
1000 meters and a 4-silhouette target bank at 600 meters.
15. While in a CBRN posture wearing a field protective mask w/hood and gloves,
and in a time limit of 20 seconds, engage a 4-silhouette target bank at
400 meters.
16. While in a CBRN posture wearing a field protective mask w/hood and gloves,
and in a time limit of 45 seconds, engage a stationary vehicle silhouette
at 900 meters and a 4-silhouette target bank at 700 meters.
PREREQUISITE EVENTS:
0331-MK19-1102
RELATED EVENTS:
0331-MK19-1108 0331-MK19-2110 0331-MK19-1109
REFERENCES:
1. FM 3-22.27 MK19 40MM Grenade Machine Gun MOD 3
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
13-37
NAVMC 3500.44
16 Sep 08
ORDNANCE:
DODIC Quantity
B542 Cartridge, 40mm HEDP M430/M430A1 Lin 120
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17582 Automated Multipurpose Machine Gun Range (MPMG)
Facility Code 17580 Machine Gun Transition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. All target engagements are conducted at the sustained rate using 6-8
round bursts.
2. The ammunition belt of 60 rounds allows for an allotment of two 3-round
bursts for each of the 10 targets. Any leftover bursts (resulting from
first-burst hits) may be applied to a target that was not hit with the
first or second burst, but no more than three bursts are allowed for any
target.
3. Scoring is as follows: 3 points for first burst hits, 2 points for
second burst hits, 1 point for third burst hits, and minus one point (-1)
for targets not hit.
4. A score of 10 points (out of a possible 30) is required to pass Table
I.
0331-MK19-1108: Conduct the Range Card Course for a MK19 (Gunnery Table II)
(B)
PERFORMANCE STEPS:
1. With a 24-round belt of ammunition, register the four point targets (4-
silhouette target banks and/or vehicle silhouettes) at 400, 600, 800, and
1000 meters.
2. Record the T&E data for the point targets on the range card.
3. With a 18-round belt of ammunition, register the three linear targets; one
shallow target at 500 meters, and two deep targets (one centered at 700
meters, and one centered at 900 meters).
4. Record the T&E data for the linear targets on the range card.
5. Prepare a 21-round belt of ammunition.
6. Engage the three linear targets using T&E data from the range card, firing
3-round bursts.
13-38
NAVMC 3500.44
16 Sep 08
7. Engage the four point targets using T&E data from the range card, firing
3-round bursts.
PREREQUISITE EVENTS:
0331-MK19-1102
RELATED EVENTS:
0331-MK19-1106 0331-MK19-2110
REFERENCES:
1. FM 3-22.27 MK19 40MM Grenade Machine Gun MOD 3
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B542 Cartridge, 40mm HEDP M430/M430A1 Lin 63
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Performance steps 1-4 are for the registration of targets and the
preparation of the range card.
2. Performance steps 5-7 are engagement and are scored as follows: 1 point
for each target hit, with a total possible of 7 points.
3. A passing score on this gunnery table is 5 out of 7.
0331-MK19-1109: Conduct the Night Vision Device (NVD) Course for the MK19
(Gunnery Table III) (B)
PERFORMANCE STEPS:
1. Prepare a belt of 42 rounds.
2. In a time limit of 20 seconds, engage a vehicle silhouette at 600 meters.
3. In a time limit of 20 seconds, engage a vehicle silhouette at 1000 meters.
13-39
NAVMC 3500.44
16 Sep 08
PREREQUISITE EVENTS:
0331-MK19-1103
RELATED EVENTS:
0331-MK19-1108 0331-MK19-1106
REFERENCES:
1. FM 3-22.27 MK19 40MM Grenade Machine Gun MOD 3
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 11-5855-214-10 Operator's Manual, Night Vision Sight, Crew-Served
Weapon AN/TVS-5
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B542 Cartridge, 40mm HEDP M430/M430A1 Lin 42
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The ammunition load allows for an allotment of two 3-round bursts for
each of the 7 targets. Any leftover bursts (resulting from a first-burst
hit) may be applied to a target that was not hit with the first or second
burst, but no more than three bursts are allowed for any target.
2. Scoring criteria: 3 points for 1st burst hits, 2 points for 2nd burst
hits, 1 point for 3rd burst hits, minus one (-1) point if target is not hit
within the first three bursts.
3. 14 points are required to achieve a passing score on Table III.
13-40
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Clear the weapon.
2. Disassemble the weapon.
3. Clean the weapon.
4. Inspect for serviceability.
5. Lubricate the weapon.
6. Assemble the weapon.
7. Perform a function check.
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 08670A-10/1A Operator's Manual, Machinegun, 7.62mm, M240
CONDITION: Given an SL-3 complete medium machinegun and an M122 tripod, while
wearing a fighting load.
PERFORMANCE STEPS:
1. Inspect the medium machinegun and associated components for
serviceability.
2. Emplace the M122 tripod in the desired location.
3. Attach the medium machinegun receiver to the M122 tripod with provided
mount.
4. Attach appropriate associated components.
RELATED EVENTS:
0331-MMG-1013
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 08670A-10/1A Operator's Manual, Machinegun, 7.62mm, M240
4. TM 08670A-14&P/1 Supplement 1, M240G
13-41
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Inspect the medium machinegun and associated components for
serviceability.
2. Attach the appropriate vehicle mount to the tactical vehicle.
3. Attach the mounting adaptor to the medium machinegun.
4. Attach the ammo tray to the selected vehicle mount.
RELATED EVENTS:
0331-MMG-1002
REFERENCES:
1. FM 21-305 Manual for Wheeled Vehicle Driver
2. FM 3-22.68 Light and Medium machineguns
3. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
4. TM 2320-10/6A Truck Utility 1/4 Ton 4X4
SUPPORT REQUIREMENTS:
EQUIPMENT:
1. Appropriate tactical vehicle.
PERFORMANCE STEPS:
1. Clear the weapon.
2. Place the first round against cartridge stop (links facing up).
3. Close cover. (Condition 3)
13-42
NAVMC 3500.44
16 Sep 08
4. Pull cocking handle to the rear and place the weapon on safe.
5. Return the cocking handle forward. (Condition 1)
RELATED EVENTS:
0331-MMG-1005
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 08670A-10/1A Operator's Manual, Machinegun, 7.62mm, M240
4. TM 08670A-14&P/1 Supplement 1, M240G
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A135 Cartridge, 7.62mm Dummy M63 6
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
PERFORMANCE STEPS:
1. Ensure bolt is forward, weapon on fire.
2. Push first round past the rear feed pawl (two clicks). (Condition 3)
3. Pull bolt to the rear, place weapon on safe. (Condition 1)
RELATED EVENTS:
0331-MMG-1***
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 08670A-10/1A Operator's Manual, Machinegun, 7.62mm, M240
4. TM 08670A-14&P/1 Supplement 1, M240G
SUPPORT REQUIREMENTS:
13-43
NAVMC 3500.44
16 Sep 08
ORDNANCE:
DODIC Quantity
A135 Cartridge, 7.62mm Dummy M63 6
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
PERFORMANCE STEPS:
1. Pull the bolt to the rear.
2. Place the weapon on safe.
3. Face down and away from the weapon.
4. Raise cover.
5. Remove ammunition.
6. Change barrel.
7. Reload ammunition.
8. Close cover.
RELATED EVENTS:
0331-MMG-1001
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A135 Cartridge, 7.62mm Dummy M63 6
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
13-44
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Announce "MISFIRE."
2. Wait 5 seconds to guard against hang fire.
3. Within the next 5 seconds, pull the cocking handle to the rear to guard
against round cook off.
4. Observe for feeding and ejecting of ammunition (if feeding or ejecting
does not occur, perform remedial action).
5. If feeding and ejecting occurs, push cocking handle forward.
6. Engage targets.
RELATED EVENTS:
0331-MMG-1004 0331-MMG-1005 0331-MMG-1014
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 08670A-10/1A Operator's Manual, Machinegun, 7.62mm, M240
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A135 Cartridge, 7.62mm Dummy M63 6
PERFORMANCE STEPS:
1. Place weapon on safe.
2. Determine if barrel is hot or cold.
3. If hot, wait 15 minutes for possibility of cook off.
4. If cold, clear weapon.
13-45
NAVMC 3500.44
16 Sep 08
PREREQUISITE EVENTS:
0331-MMG-1013
RELATED EVENTS:
0331-MMG-1004 0331-MMG-1013 0331-MMG-1005
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 08670A-10/1A Operator's Manual, Machinegun, 7.62mm, M240
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A135 Cartridge, 7.62mm Dummy M63 6
PERFORMANCE STEPS:
1. De-link nine (9) single rounds and a belt of three (3) rounds.
2. Ensure the rear sight leaf is flipped down for zeroing. Set the sights at
500m (battlesight setting).
3. Put the gun in Condition 1.
4. Lay the gun on the first paster, ensuring that the sights are aligned and
at 6 o'clock on the paster.
5. Fire 3 rounds, one round at a time, ensuring that the same 6 o'clock sight
picture is regained on the paster between shots.
6. Put the gun in Condition 4.
7. Move downrange to observe the shot group and mark the center of the
target.
8. Measure the lateral and vertical distance between the center of the shot
group and the center of the aiming paster.
9. If the center of the shot group is in the center of the paster, the gun is
13-46
NAVMC 3500.44
16 Sep 08
zeroed.
10. If the center of the shot group is not in the center of the paster, adjust
the front sight as needed.
11. After adjusting windage and elevation, lower the retaining strap, but do
not lock it down until the BZO elevation is confirmed.
12. Put the gun in Condition 1.
13. Fire another 3-round shot group (one round at a time) at the same paster.
14. Put the gun in Condition 4.
15. Move back downrange to observe the shot group and make appropriate sight
adjustments.
16. Put the gun in Condition 1.
17. Fie the last 3-round shot group (one round at a time) at the same paster.
18. Put the gun in Condition 4.
19. Move back downrange to observe the shot group and make final sight
adjustments.
20. Put the gun in Condition 1.
21. Confirm the zero by firing a burst of 3 rounds at the second paster.
22. Once the zero is confirmed, ensure the front sight assembly is snug
laterally, and then lock the front sight blade retaining strap down into
its detent.
23. Repeat this procedure for the spare barrel.
RELATED EVENTS:
0300-M249-1009 0300-M249-1006 0331-MMG-1102
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A131 Cartridge, 7.62mm 4 Ball M80/1 Trace 24
RANGE/TRAINING AREA:
Facility Code 17510 Basic 10M-25M Firing Range (Zero)
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The BZO established in this task should be used for Gunnery Table I
(0331-MMG-1106).
13-47
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Select a suitable target downrange, preferably at battlesight range - 500
meters.
2. Estimate the range to target.
3. Set the rear sight elevation to the estimated range, and lay the gun on
target (sights at 6 o'clock to the target).
4. Fire a 6-round burst while the team leader observes the impacts.
5. Make corrections to the gun by manipulating the T&E until the beaten zone
is adjusted onto target.
6. Once the impacts are on target, the gunner maintains his position,
ensuring that the lay of the gun remains the same while sight adjustments
are made - windage first, and then elevation.
7. Use the front sight adjusting tool to unlock the front sight retaining
strap and rotate it upwards.
8. Adjust for windage and elevation.
9. Once elevation is correct, rotate the retaining strap back down , but do
not lock it until BZO is confirmed.
10. Fire a 6-round burst for confirmation. If the burst is not on target, the
sight adjustment process should be repeated until the beaten zone impacts
the target.
11. Once the zero of the primary barrel is confirmed, change barrels and
follow the same procedure for field zeroing the spare barrel.
RELATED EVENTS:
0300-M249-1006 0331-MMG-1101 0300-M249-1009
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A131 Cartridge, 7.62mm 4 Ball M80/1 Trace 48
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
0331-MMG-1103: Zero a Night Aiming Device (NAD) for a medium machinegun (B)
13-48
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Select a suitable target downrange, preferably at 500 meters.
2. Ensure that both the rail grabber and TPIAL have been securely tightened
with a flat-tip screwdriver.
3. Ensure that the TPIAL has been preset to zero.
4. Turn the selector switch to Setting 3 (AIM - HI).
5. While looking through the NVD, press the cable switch button to activate
the aiming beam.
6. Manipulate the gun until the aiming beam is centered on the target.
7. Fire a 6-round burst and observe the beaten zone.
8. Re-tighten the PEQ-2 and its mount with a screwdriver.
9. Re-lay the gun to move the impacts onto the target.
10. Repeat steps 6 through 8 above until the burst is on target.
11. Once the burst is on target, keep the gun in place and have an assistant
make adjustments to move the aiming beam onto the target by adjusting
windage first, then elevation.
12. Re-tighten both the rail grabber and TPIAL with a screwdriver.
13. Fire another 6-round burst and make any necessary adjustments to the
aiming beam.
14. Remove the lens cap from the illuminator.
15. Turn the selector switch to Setting 5 (DUAL - HI/HI).
16. Rotate the focus know toward the spot illumination setting until the
illuminating beam is small enough to be centered through visual
observation.
17. Manipulate the illuminating beam adjusters so that the aiming beam is
centered in the middle of the illuminating beam.
18. Fire a final 6-round burst to confirm the field zero.
PREREQUISITE EVENTS:
0331-MMG-1102 0331-MMG-1101
RELATED EVENTS:
0311-M249-1004 0300-M249-1006 0331-MMG-1109
0331-MMG-1104 0331-MMG-1105 0300-M249-1009
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 10470A-12&P/1A Operator's and Unit Maintenance Manual, Target Pointer
Illuminator/Aiming Light, AN/PEQ-2A
SUPPORT REQUIREMENTS:
13-49
NAVMC 3500.44
16 Sep 08
ORDNANCE:
DODIC Quantity
A131 Cartridge, 7.62mm 4 Ball M80/1 Trace 30
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17580 Machine Gun Transition Range
PERFORMANCE STEPS:
1. Select a suitable target downrange, preferably at 500 meters.
2. Ensure the PVS-17 mount has been securely tightened to the rail with a
flat-tip screwdriver.
3. Turn the PVS-17 on and adjust the reticle for brightness and focus.
4. Lay the gun on the target, with the reticle in the center of the target.
5. Fire a 6-round burst and observe the beaten zone.
6. Re-tighten the PVS-17 mount with a screwdriver.
7. Re-lay the gun to move the impacts onto the target.
8. Repeat steps 5 through 7 above until the burst is on target.
9. Once the burst is on target, keep the gun in place and have an assistant
make adjustments to move the sight onto the target by adjusting windage
first, then elevation.
10. Fire another 6-round burst and make any necessary adjustments to the
reticle.
11. The PVS-17 is zeroed when the reticle is centered on the beaten zone.
12. Fire a final 6-round burst to confirm the field zero.
PREREQUISITE EVENTS:
0331-MMG-1102 0331-MMG-1101
RELATED EVENTS:
0311-M249-1004 0311-M249-1005 0311-M249-1007
0331-MMG-1109 0331-MMG-1103 0331-MMG-1105
0311-M249-1006
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 10796-12&P Operators Manual for AN/PVS-17/17B/17C Miniature Night Sight
13-50
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A131 Cartridge, 7.62mm 4 Ball M80/1 Trace 30
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
PERFORMANCE STEPS:
1. Select a suitable target downrange, preferably at 500 meters.
2. Ensure the TWS mount has been securely tightened to the rail with a flat-
tip screwdriver.
3. Turn the TWS on and adjust the focus ring to bring the target into focus.
4. Turn the FOV ring to select NFOV, which is optimal for field zeroing.
5. Select the reticle for the weapon system (M240).
6. Zero the reticle.
7. Using the RETICLE ADJUST switch, set the azimuth and elevation indicators
to zero.
8. Lay the gun on the target so that the zeroing aimpoint is on the center
mass of the target.
9. Use the 500m aiming point for zeroing.
10. Fire a 6-round burst and observe the beaten zone.
11. Re-tighten the torque knob on the mount until 2 clicks are heard.
12. Re-lay the gun to move the impacts onto the target.
13. Repeat steps 10 through 12 until the burst is on target.
14. Once the burst is on target, keep the gun in place and have an assistant
adjust the reticle to move the zeroing aimpoint onto the target.
15. Fire another 6-round burst and make any necessary adjustments to the
reticle.
16. The TWS is field-zeroed when the zeroing aimpoint is centered in the
beaten zone.
17. Fire a final 6-round burst to confirm the field zero.
PREREQUISITE EVENTS:
0331-MMG-1102 0331-MMG-1101
13-51
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
0311-M249-1005 0311-M249-1006 0311-M249-1007
0331-MMG-1109 0331-MMG-1103 0331-MMG-1104
0311-M249-1004
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
3. TM 10091B/10092B-10/1 AN/PAS-13B(V)2 & 3 THERMAL SIGHT
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A131 Cartridge, 7.62mm 4 Ball M80/1 Trace 30
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17580 Machine Gun Transition Range
0331-MMG-1106: Conduct the 12.7-meter Basic Course for the medium machinegun
(Gunnery Table I) (B)
PERFORMANCE STEPS:
1. Prepare two (2) 6-round belts of ammunition.
2. Engage pasters in Bank 3-4 (one paster each) with one 6-round burst each.
3. Prepare a 30-round belt of ammunition.
4. Engage pasters in Bank 5-6 (5 pasters total) with one 6-round burst each,
using the traverse and search mechanism for each subsequent burst.
5. Prepare a 48-round belt of ammunition.
6. Engage pasters in Bank 7-8 (8 pasters total) with one 6-round burst each,
using the traverse and search mechanism as appropriate for each subsequent
burst.
7. Prepare four (4) 6-round belts of ammunition.
8. In a time limit of 45 seconds, engage pasters in Bank 1-4 (4 pasters
total) with one 6-round burst each. No manipulation of the T&E is
required other than to obtain proper sight alignment and picture before
firing the 6-round bursts.
9. Prepare a 30-round belt of ammunition.
10. In a time limit of 30 seconds, engage pasters in Bank 5-6 (5 pasters
13-52
NAVMC 3500.44
16 Sep 08
total) with one 6-round burst each, using the traverse and search
mechanism for each subsequent burst.
11. Prepare a 48-round belt of ammunition.
12. In a time limit of 45 seconds, engage pasters in Bank 7-8 (8 targets
total) with one 6-round burst each, using the traverse and search
mechanism as appropriate for each subsequent burst.
PREREQUISITE EVENTS:
0331-MMG-1101
RELATED EVENTS:
0331-MMG-1102 0331-MMG-1107 0331-MMG-1111
0331-MMG-1109 0331-MMG-1110 0331-MMG-1108
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A131 Cartridge, 7.62mm 4 Ball M80/1 Trace 192
RANGE/TRAINING AREA:
Facility Code 17510 Basic 10M-25M Firing Range (Zero)
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Total possible score for Table I is 102 points, with a minimum of 70
points for a passing score.
2. Only rounds that impact on or within the line of the paster will be
scored.
3. Each hit is scored as one point.
4. Only 6 rounds per paster will be scored, for a total score of 6 points
per paster.
5. Table I score does not constitute complete qualification for the medium
machinegun gunner. Table II (Multiple Engagement Course) must also be
fired, and the two scores added together in order to achieve a
qualification score.
13-53
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Prepare a belt of 252 rounds of ammunition.
2. In a time limit of 20 seconds, engage a double-E silhouette target at 500
meters.
3. In a time limit of 20 seconds, engage a double-E silhouette target at 400
meters.
4. In a time limit of 20 seconds, engage a double-E silhouette target at 700
meters.
5. In a time limit of 20 seconds, engage a stationary vehicle silhouette
target at 800 meters.
6. In a time limit of 35 seconds, engage multiple double-E silhouette targets
at 400 and 600 meters.
7. In a time limit of 35 seconds, engage multiple double-E silhouette targets
at 500 and 700 meters.
8. In a time limit of 45 seconds, engage multiple double-E silhouette targets
at 400, 600, and 700 meters.
9. In a time limit of 20 seconds, engage a stationary vehicle silhouette
target at 800 meters.
10. In a time limit of 35 seconds, engage a double-E silhouette target at 500
meters and a stationary vehicle silhouette target at 800 meters.
11. While in a CBRN posture wearing a field protective mask w/hood and gloves,
and in a time limit of 20 seconds, engage a double-E silhouette target at
500 meters.
12. While in a CBRN posture wearing a field protective mask w/hood and gloves,
and in a time limit of 20 seconds, engage a double-E silhouette target at
600 meters.
13. While in a CBRN posture wearing a field protective mask w/hood and gloves,
and in a time limit of 35 seconds, engage multiple double-E silhouette
targets at 500 and 700 meters.
14. While in a CBRN posture wearing a field protective mask w/hood and gloves,
and in a time limit of 45 seconds, engage multiple double-E silhouette
targets at 400 and 600 meters, and a stationary vehicle silhouette target
at 800 meters.
PREREQUISITE EVENTS:
0331-MMG-1102 0331-MMG-1101
RELATED EVENTS:
0311-M249-1001 0331-MMG-1106 0331-MMG-1111
0331-MMG-1109 0331-MMG-1110 0331-MMG-1108
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
13-54
NAVMC 3500.44
16 Sep 08
ORDNANCE:
DODIC Quantity
A131 Cartridge, 7.62mm 4 Ball M80/1 Trace 252
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. All target engagements are conducted at the sustained rate using 6-8
round bursts.
2. The ammunition belt of 252 rounds allows for an allotment of two 6-8
round bursts for each of the 21 targets. Any leftover bursts (resulting
from first-burst hits) may be applied to a target that was not hit with the
first or second burst, but no more than three bursts are allowed for any
target.
3. Scoring is as follows: 3 points for first burst hits, 2 points for
second burst hits, 1 point for third burst hits, and minus one point (-1)
for targets not hit.
0331-MMG-1108: Conduct the Range Card Course for the medium machinegun
(Gunnery Table III) (B)
PERFORMANCE STEPS:
1. With a 48-round belt of ammunition, register the Final Protective Line
(FPL) using 12-round bursts.
2. Record the T&E data for the FPL on the range card.
3. With a 48-round belt of ammunition, register the two double-E silhouette
targets (one at 400 and one at 600 meters), and the two 4-silhouette
target banks (one at 800 and one at 900 meters).
4. Record the T&E data for the point targets on the range card.
5. With a 24-round belt of ammunition, register the two linear targets; one
shallow target at 500 meters, and one deep target centered at 900 meters.
6. Record the T&E data for the linear targets on the range card.
7. With a 12-round belt of ammunition, engage the two linear targets using
T&E data from the range card.
8. With a 24-round belt of ammunition, engage the four point targets using
T&E data from the range card.
13-55
NAVMC 3500.44
16 Sep 08
9. With a 12-round belt of ammunition, fire the final protective line using
T&E data from the range card in a single burst.
PREREQUISITE EVENTS:
0331-MMG-1101 0331-MMG-1107 0331-MMG-1106
0331-MMG-1102
RELATED EVENTS:
0331-MMG-1103 0331-MMG-1104 0331-MMG-1111
0331-MMG-1109 0331-MMG-1110 0331-MMG-1105
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A131 Cartridge, 7.62mm 4 Ball M80/1 Trace 168
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Performance steps 1-6 are for the registration of targets and the
preparation of the range card.
2. Performance steps 7-9 are engagement and are scored as follows: 1 point
for each target hit, with a total possible of 7 points.
3. When firing the FPL, the burst must achieve grazing fire, as evidenced
by the beaten zone striking a reference point determined during
registration.
4. A passing score on this gunnery table is 5 out of 7.
0331-MMG-1109: Conduct the Night Vision Device (NVD) Course for the medium
machinegun (Gunnery Table IV) (B)
13-56
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Prepare a belt of 144 rounds.
2. In a time limit of 20 seconds, engage a double-E silhouette target at 500
meters.
3. In a time limit of 20 seconds, engage a double-E silhouette target at 400
meters.
4. In a time limit of 20 seconds, engage a double-E silhouette target at 700
meters.
5. In a time limit of 20 seconds, engage a stationary vehicle silhouette
target at 800 meters.
6. In a time limit of 35 seconds, engage multiple double-E silhouette targets
at 400 and 600 meters.
7. In a time limit of 35 seconds, engage multiple double-E silhouette targets
at 500 and 700 meters.
8. In a time limit of 45 seconds, engage multiple double-E silhouette targets
at 400, 600, and 700 meters.
9. In a time limit of 20 seconds, engage a stationary vehicle silhouette
target at 800 meters.
PREREQUISITE EVENTS:
0331-MMG-1102 0331-MMG-1101 0331-MMG-1105
0331-MMG-1104 0331-MMG-1103
RELATED EVENTS:
0331-MMG-1106 0331-MMG-1107 0331-MMG-1111
0331-MMG-1110 0331-MMG-1108
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A131 Cartridge, 7.62mm 4 Ball M80/1 Trace 144
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The ammunition load allows for an allotment of two 6-round bursts for
each of the 12 targets. Any leftover bursts (resulting from a first-burst
hit) may be applied to a target that was not hit with the first or second
burst, but no more than three bursts are allowed for any target.
2. Scoring criteria: 3 points for 1st burst hits, 2 points for 2nd burst
hits, 1 point for 3rd burst hits, minus one (-1) point if target is not hit
within the first three bursts.
3. 24 points are required to achieve a passing score on Table IV.
13-57
NAVMC 3500.44
16 Sep 08
0331-MMG-1110: Conduct the 12.7-meter Bipod Course for the medium machinegun
(Gunnery Table (V) (B)
PERFORMANCE STEPS:
1. Prepare a belt of 36 rounds of ammunition.
2. Fire a 6-round burst at scoring space 3 on the target.
3. Fire a 6-round burst at scoring space 4 on the target.
4. Fire a 6-round burst at scoring space 5 on the target.
5. Fire a 6-round burst at scoring space 6 on the target.
6. Fire a 6-round burst at scoring space 7 on the target.
7. Fire a 6-round burst at scoring space 8 on the target.
PREREQUISITE EVENTS:
0331-MMG-1106 0331-MMG-1101
RELATED EVENTS:
0331-MMG-1102 0331-MMG-1111 0331-MMG-1108
0331-MMG-1107
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A131 Cartridge, 7.62mm 4 Ball M80/1 Trace 36
RANGE/TRAINING AREA:
Facility Code 17510 Basic 10M-25M Firing Range (Zero)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. On the Basic Machinegun Target, scoring spaces 1 and 2 are used for
zeroing, spaces 3 through 8 are used during the familiarization course.
2. One point is awarded for each scoring space hit.
3. A minimum score of 4 out of 6 must be achieved to pass Gunnery Table V
and progress on to Gunnery Table VI.
13-58
NAVMC 3500.44
16 Sep 08
0331-MMG-1111: Conduct the Bipod Multiple Engagement Course for the medium
machinegun (Gunnery Table VI) (B)
PERFORMANCE STEPS:
1. Prepare a 132-round belt of ammunition.
2. In a time limit of 5 seconds, engage a single-E silhouette target at 200
meters.
3. In a time limit of 10 seconds, engage a double-E silhouette target at 400
meters.
4. In a time limit of 20 seconds, engage a single-E silhouette target at 200
meters and a double-E silhouette target at 400 meters.
5. In at time limit of 25 seconds, engage multiple single-E silhouette
targets at 100 and 200 meters, and a double-E silhouette target at 400
meters.
6. While in a CBRN posture wearing a field protective mask w/hood and gloves,
and in a time limit of 10 seconds, engage a single-E silhouette target at
100 meters.
7. While in a CBRN posture wearing a field protective mask w/hood and gloves,
and in a time limit of 15 seconds, engage a double-E silhouette target at
300 meters.
8. While in a CBRN posture wearing a field protective mask w/hood and gloves,
and in a time limit of 20 seconds, engage a single-E silhouette target at
100 meters and a double-E silhouette target at 300 meters.
PREREQUISITE EVENTS:
0331-MMG-1110
RELATED EVENTS:
0331-MMG-1101 0331-MMG-1102 0331-MMG-1109
0331-MMG-1107 0331-MMG-1108 0331-MMG-1106
REFERENCES:
1. FM 3-22.68 Light and Medium machineguns
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A131 Cartridge, 7.62mm 4 Ball M80/1 Trace 132
13-59
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17580 Machine Gun Transition Range
Facility Code 17581 Machine Gun Field Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. All target engagements are conducted at the sustained rate using 6-8
round bursts.
2. The ammunition belt of 132 rounds allows for an allotment of two 6-8
round bursts for each of the 11 targets. Any leftover bursts (resulting
from first-burst hits) may be applied to a target that was not hit with the
first or second burst, but no more than three bursts are allowed for any
target.
3. Scoring is as follows: 3 points for first burst hits, 2 points for
second burst hits, 1 point for third burst hits, and minus one point (-1)
for targets not hit.
4. A score of 22 points (out of a possible 33) is required to pass Table
VI.
13-60
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Determine the unit's mission from higher headquarters' mission,
Commander's intent, and unit's tasks.
2. Analyze the assigned sector of fire.
3. Analyze possible positions for good fields of fire.
4. Analyze the effectiveness of available cover and concealment.
5. Ensure the available firing positions facilitate the exercise of fire
control.
6. Ensure machineguns are located and employed so that they can mutually
support one another.
7. Designate the exact firing (primary) position on the ground prior to
entrenching.
8. Designate an alternate firing position, which can continue to accomplish
the original mission.
9. Designate a supplementary firing position.
RELATED EVENTS:
0331-EMPL-1001 0331-EMPL-1002
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. FM 3-22.68 Light and Medium machineguns
4. MCWP 3-11.2 Marine Rifle Squad
5. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
13-61
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Ensure tripod is oriented on the center of the assigned sector of fire.
2. Ensure aiming stakes are emplaced and cannot be knocked down easily.
3. Ensure firing platform is large enough to support the machinegun.
4. Align the barrel of the machinegun on the final protective line.
5. Align the barrel of the machinegun on the principal direction of fire, if
assigned.
6. Ensure the frontal parapet is a minimum of 3 ft in width and high enough
to conceal the crew from the flanks and rear.
7. Ensure position is at least armpit deep and enables the Gunner to shoot
with ease.
8. Ensure a shelf 1 foot wide is clear within the position that separates the
parapet and the hole.
9. Ensure tripod legs have been emplaced by digging, sandbagging, or staking
them down.
10. Ensure there are 3 grenade sumps at various points within the hole.
11. Ensure the position is camouflaged.
12. Ensure the position is concealed from enemy air observation.
13. If time and materials are available, ensure overhead cover has been
constructed.
14. Observe the position from the enemy's view point to determine inherent
weaknesses.
15. Have Team Leader point out alternate and supplementary positions.
16. When there is a 3-man crew, ensure Ammunition Bearer digs a 1 man fighting
position to the flank of the position.
17. Ensure a range card is located near the machinegun.
RELATED EVENTS:
0331-EMPL-1001 0331-EMPL-1002 0331-EMPL-2001
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. FM 3-22.68 Light and Medium machineguns
4. MCWP 3-11.2 Marine Rifle Squad
5. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
13-62
NAVMC 3500.44
16 Sep 08
STANDARD: To obtain the safety limit to which troops can safely advance.
PERFORMANCE STEPS:
1. Aim in on designated target.
2. Determine the method for establishing the safety limit (Overhead Firing
Charts, Gunner's Rule, or Leader's Rule).
3. Apply the selected method in accordance with the reference.
4. Report safety limit to friendly troops.
5. Emplace depression stops.
RELATED EVENTS:
0331-EMPL-1002
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. FM 3-22.68 Light and Medium machineguns
4. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17582 Automated Multipurpose Machine Gun Range (MPMG)
Facility Code 17410 Maneuver/Training Area, Light Forces
13-63
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Analyze the mission using METT-T and OKOCAW.
2. Consider the characteristics/capabilities of the machineguns.
3. Consider the techniques of fire.
4. Consider employment of machineguns in the offense and defense.
5. Apply principles of machinegun employment.
RELATED EVENTS:
0331-MK19-1005 0331-MMG-1006 0331-EMPL-1007
0331-EMPL-2009 0331-EMPL-2007 0331-EMPL-1006
0331-M2-1007
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. FM 3-22.68 Light and Medium machineguns
4. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17582 Automated Multipurpose Machine Gun Range (MPMG)
Facility Code 17410 Maneuver/Training Area, Light Forces
PERFORMANCE STEPS:
1. Ensure the compass has been declinated prior to use.
2. Locate the gun position and target on a map and draw a line between the
two points.
3. Orient the map to the terrain and place the line of sight of the compass
along the gun-target line drawn on the map.
4. The Squad Leader announces the magnetic azimuth indicated by the compass
index to the guns as the direction of lay.
5. In order to measure the angle of site, hold the opened compass in a
vertical plane with the rear sight toward the body and the angle of sight
13-64
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
0331-EMPL-1006
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. FM 3-22.68 Light and Medium machineguns
4. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
5. TM 9-1290-333-15 W/CH 1-4 Compass Magnetic Unmounted, M2
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
0331-EMPL-2006: Lay a machinegun for Direction and Elevation using the M1A2
gunner's quadrant (B)
PERFORMANCE STEPS:
1. Ensure the compass has been declinated prior to use.
2. Locate the gun position and target on a map and draw a line between the
13-65
NAVMC 3500.44
16 Sep 08
two points.
3. Orient the map to the terrain and place the line of sight on the compass
along the gun-target line drawn on the map.
4. The Squad Leader announces the magnetic azimuth indicated by the compass
index to the guns as the direction of lay.
5. Perform micrometer test on M1A2.
6. Perform the end for end test on the M1A2.
7. Add the end for end correction if any to the desired elevation and place
new elevation on quadrant using both the index pointer on the elevation
scale and the micrometer.
8. Point quadrant toward muzzle end of the weapon.
9. Depress/elevate the weapon until the bubble centers in the level vial to
set the gun on the desired Quadrant Elevation.
RELATED EVENTS:
0331-EMPL-1006
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. FM 3-22.68 Light and Medium machineguns
4. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
5. TM 02193C-14&P M/S Quadrant M1A1 & M1A2
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
PERFORMANCE STEPS:
1. Ensure effective fire is distributed over the entire target area.
2. Ensure machineguns engage wide and deep targets in accordance with the
reference.
3. Ensure (when practical) at least two machineguns are assigned the same
mission.
RELATED EVENTS:
0331-EMPL-2007 0331-EMPL-2004 0331-EMPL-2009
13-66
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 3-22.27 MK19
2. FM 3-22.65 Browning Machine Gun, M2
3. FM 3-22.68 Light and Medium machineguns
4. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17410 Maneuver/Training Area, Light Forces
PERFORMANCE STEPS:
1. Alert the machinegun team/squad by announcing unit size, in order to
choose the gun crews and ready them to receive and execute the fire
command.
2. Give direction to the target; when targets are not obvious, use a
reference point (RP).
3. Issue a brief target description, in order to inform the machinegun
gunners of the nature of the target.
4. Issue the range to the target; ensuring announcement is delivered in
single digits (thousands then hundreds (e.g. "One-Five Hundred" for 1500
meters)).
5. Issue assignments/methods only when specific assignments are required to
divide or subdivide the target, assign class of fire, or announce the rate
of fire.
6. Issue the control order, in order to open fire.
7. Issue subsequent fire commands, in order to repeat or correct a fire
command, to adjust fire, to cease or commence fire, or terminate the
alert.
RELATED EVENTS:
0331-EMPL-2007 0331-EMPL-2008 0331-EMPL-2004
0331-M2-1002 0331-EMPL-1002 0331-MMG-1***
0331-MMG-1006 0331-EMPL-1006 0331-EMPL-1007
0331-M2-1007 0331-MK19-1005
REFERENCES:
1. FM 3-22.27 MK19
13-67
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
Facility Code 17581 Machine Gun Field Fire Range
PERFORMANCE STEPS:
1. Prepare a 168-round belt of ammunition.
2. In a time limit of 20 seconds, from a stationary platform, engage a
stationary vehicle silhouette at 900 meters.
3. In a time limit of 35 seconds, from a stationary platform, engage a moving
vehicle silhouette at 800 meters and a stationary vehicle silhouette at
1000 meters.
4. In a time limit of 20 seconds, from a moving vehicle, engage a moving
vehicle silhouette at 600 meters.
5. In a time limit of 35 seconds, from a moving vehicle, engage multiple
stationary vehicle silhouettes at 600 and 700 meters.
6. In a time limit of 20 seconds, from a stationary platform, engage a 4-
silhouette target bank at 600 meters and a moving vehicle silhouette at
800 meters.
7. While in a CBRN posture wearing a field protective mask w/hood and gloves,
and in a time limit of 20 seconds, from a stationary firing position,
engage a stationary vehicle silhouette at 700 meters.
8. While in a CBRN posture wearing a field protective mask w/hood and gloves,
and in a time limit of 20 seconds, from a moving vehicle, engage a moving
vehicle silhouette at 800 meters and a stationary vehicle silhouette at
1000 meters.
9. While in a CBRN posture wearing a field protective mask w/hood and gloves,
and in a time limit of 45 seconds, from a stationary firing position,
engage a 4-silhouette target bank at 600 meters and multiple stationary
vehicle silhouettes at 700 and 900 meters.
13-68
NAVMC 3500.44
16 Sep 08
PREREQUISITE EVENTS:
0331-M2-1101 0331-M2-1102 0331-M2-1103
0331-MK19-1109 0331-M2-1107 0331-M2-1108
0331-M2-1106
REFERENCES:
1. FM 3-22.65 Browning Machine Gun, M2
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
A576 Cartridge, Caliber .50 4 API M8/1 AP 168
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17580 Machine Gun Transition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. All target engagements are conducted at the sustained rate using 6-8
round bursts.
2. The ammunition belt of 168 rounds allows for an allotment of two 6-8
round bursts for each of the 14 targets. Any leftover bursts (resulting
from first-burst hits) may be applied to a target that was not hit with the
first or second burst, but no more than three bursts are allowed for any
target.
3. Scoring is as follows: 3 points for first burst hits, 2 points for
second burst hits, 1 point for third burst hits, and minus one point (-1)
for targets not hit.
4. A score of 28 points (out of a possible 42) is required to pass Table
V.
13-69
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Prepare a 42-round belt of ammunition.
2. In a time limit of 20 seconds, from a stationary firing position, engage a
stationary vehicle silhouette at 1000 meters.
3. In a time limit of 20 seconds, from a stationary firing position, engage a
moving vehicle silhouette at 800 meters.
4. In a time limit of 20 seconds, from a moving vehicle, engage a moving
vehicle silhouette at 600 meters.
5. In a time limit of 35 seconds, from a moving vehicle, engage multiple
stationary vehicle silhouettes at 400 and 700 meters.
6. While in a CBRN posture wearing a field protective mask w/hood and gloves,
and in a time limit of 20 seconds, from a stationary firing position,
engage a stationary vehicle silhouette at 500 meters.
7. While in a CBRN posture wearing a field protective mask w/hood and gloves,
and in a time limit of 20 seconds, from a moving vehicle, engage a moving
vehicle silhouette at 900 meters.
PREREQUISITE EVENTS:
0331-MK19-1102 0331-MK19-1103 0331-MK19-1109
0331-MK19-1108 0331-MK19-1106
REFERENCES:
1. FM 3-22.27 MK19 40MM Grenade Machine Gun MOD 3
2. MCWP 3-15.1_ ** Machine Guns and Machine Gun Gunnery (Currently under
revision)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B542 Cartridge, 40mm HEDP M430/M430A1 Lin 42
RANGE/TRAINING AREA:
Facility Code 17581 Machine Gun Field Fire Range
Facility Code 17580 Machine Gun Transition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. All target engagements are conducted at the sustained rate using 3-
round bursts.
2. The ammunition belt of 42 rounds allows for an allotment of two 3-round
bursts for each of the 7 targets. Any leftover bursts (resulting from
first-burst hits) may be applied to a target that was not hit with the
first or second burst, but no more than three bursts are allowed for any
target.
3. Scoring is as follows: 3 points for first burst hits, 2 points for
second burst hits, 1 point for third burst hits, and minus one point (-1)
for targets not hit.
4. A score of 14 points (out of a possible 21) is required to pass Table
IV.
13-70
NAVMC 3500.44
16 Sep 08
CHAPTER 14
PARAGRAPH PAGE
14-1
NAVMC 3500.44
16 Sep 08
CHAPTER 14
14000. PURPOSE. This chapter details the individual events that pertain to
the community. These events are linked to a service-level Mission Essential
Tasks (MET). This linkage tailor’s individual training for the selected MET.
Each individual event provides an event title, along with the conditions
events will be performed under, and the standard to which the event must be
performed to be successful.
14001. ADMINISTRATIVE NOTES. T&R events are coded for ease of reference.
Each event has a 4-4-4 digit identifier. The first four digits represent the
occupational field or military occupational field (0341). This chapter
contains mortar man individual training events. The second four digits
represent the functional or duty area. The last four digits represent the
level, and identifier number of the event. Every individual event has an
identifier number from 001 to 999.
Core Capabilities:
1. Carry out the orders of the Mortar Squad Leader.
2. Perform the tasks required of an Ammunition Man in the 60mm Mortar
Section of a Weapons Platoon.
3. Performs operator maintenance for and operates an M224 60mm mortar.
4. Performs operator maintenance for and is a proficient marksman with a
service rifle/carbine and an M249 squad automatic weapon.
5. Emplaces and recovers an M18A1 Claymore mine.
6. Detects and marks a mine.
7. Utilizes smoke grenades and pyrotechnics for signaling, illumination, and
screening.
14-2
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carry out the orders of the Mortar Squad Leader.
2. Perform the tasks required of an Assistant Gunner in the 60mm Mortar
Section of a Weapons Platoon.
3. Performs operator maintenance for and operates an M224 60mm mortar.
4. Performs operator maintenance for and is a proficient marksman with a
service rifle/carbine, a service pistol, and an M249 squad automatic weapon.
5. Emplaces and recovers an M18A1 Claymore mine.
6. Detects and marks a mine.
7. Utilizes smoke grenades and pyrotechnics for signaling, illumination, and
screening.
8. Determines current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
9. Perform self-aid and buddy aid.
10. Performs individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
11. Communicate using proper communications procedures with organic wired
and wireless communications.
12. Performs fire and movement as an individual and as a member of a mortar
squad.
13. Locates, closes with, suppresses, and destroys the enemy by fire and
maneuver.
14. Repels an enemy assault by fire and close combat.
_______________________________________________________________________
BILLET: Squad Leader/Gunner, 60mm Mortar Section, Weapons Platoon
The 60mm Mortar Squad Leader/Gunner is located where he can manipulate the
sight, elevate the gear handle, and traverse the assembly wheel. He places
firing data on the sight and lays the mortar for deflection and elevation.
Assisted by the Squad Leader (or Ammunition Man), he makes large deflection
shifts by shifting the bipod assembly. His rank is a Corporal and his T/O
weapon is the service rifle/carbine.
Core Capabilities:
1. Carry out the orders of the 60mm Mortar Section Leader.
2. Perform the tasks required of a Squad Leader and a Gunner in the 60mm
Mortar Section of a Weapons Platoon.
14-3
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carry out the orders of the Mortar Squad Leader.
2. Perform the tasks required of a Driver and Ammunition Man in the 81mm
Mortar Platoon.
3. Performs operator maintenance for and operates an M252 81mm mortar.
4. Performs operator maintenance for and is a proficient marksman with a
service rifle/carbine and an M249 squad automatic weapon.
5. Emplaces and recovers an M18A1 Claymore mine.
6. Detects and marks a mine.
7. Utilizes smoke grenades and pyrotechnics for signaling, illumination, and
screening.
8. Determines current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
9. Perform self-aid and buddy aid.
10. Performs individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
11. Communicate using proper communications procedures with organic wired
and wireless communications.
12. Performs operator maintenance for, and operates an M998 high-back HMMWV.
14-4
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carry out the orders of the Mortar Squad Leader.
2. Performs the tasks required of an Ammunition Man in the 81mm Mortar
Platoon (particularly in ammunition identification by type, ammunition
handling, and ammunition fuse/charge settings).
3. Performs operator maintenance for and operates an M252 81mm mortar.
4. Performs operator maintenance for and is a proficient marksman with a
service rifle/carbine and an M249 squad automatic weapon.
5. Emplaces and recovers an M18A1 Claymore mine.
6. Detects and marks a mine.
7. Utilizes smoke grenades and pyrotechnics for signaling, illumination, and
screening.
8. Determines current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
9. Perform self-aid and buddy aid.
10. Performs individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
11. Communicate using proper communications procedures with organic wired
and wireless communications.
12. Performs operator maintenance for and operates an M998 high-back HMMWV.
13. Performs fire and movement as an individual and as a member of a mortar
squad.
14. Locates, closes with, suppresses, and destroys the enemy by fire and
maneuver.
15. Repels an enemy assault by fire and close combat.
_______________________________________________________________________
BILLET: Assistant Gunner, 81mm Mortar Platoon, Weapons Company
The 81mm Mortar Assistant Gunner stands on the right side of the mortar,
facing the barrel and ready to load. In addition to loading, he is
responsible for swabbing the bore after every 10 rounds have been fired or
after each fire mission. He assists the Gunner in shifting the mortar when
making large deflection changes. His rank is a Lance Corporal and his T/O
weapon is the service rifle/carbine.
Core Capabilities:
1. Carry out the orders of the Mortar Squad Leader.
2. Perform the tasks required of an Assistant Gunner in the 81mm Mortar
Platoon.
3. Performs operator maintenance for and operates an M252 81mm mortar.
4. Performs operator maintenance for and is a proficient marksman with a
service rifle/carbine and an M249 squad automatic weapon.
5. Emplaces and recovers an M18A1 Claymore mine.
6. Detects and marks a mine.
14-5
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carry out the orders of the 81mm Squad Leader.
2. Perform the tasks required of Gunner in the 81mm Mortar Platoon.
3. Maintains the condition, care, and economical use of assigned personnel,
weapons, and equipment.
4. Performs operator maintenance for and is a proficient marksman with a
service rifle/carbine.
5. Performs operator maintenance for and operates an M252 81mm mortar.
6. Emplaces and recovers an M18A1 Claymore mine.
7. Detects and marks a mine.
8. Utilizes smoke grenades and pyrotechnics for signaling, illumination, and
screening.
9. Determines current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
10. Perform self-aid and buddy aid.
11. Performs individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
12. Communicate using proper communications procedures with organic wired
and wireless communications.
13. Locates, closes with, suppresses, and destroys the enemy by fire and
maneuver.
14. Performs fire and movement as an individual and as a member of a mortar
squad.
15. Repels an enemy assault by fire and close combat.
_______________________________________________________________________
BILLET: Squad Leader, 81mm Mortar Platoon, Weapons Company
The 81mm Mortar Squad Leader is responsible for the tactical employment of
the 81mm Mortar and stands behind the mortar where he can command and control
his squad. In addition to supervising the emplacement, laying, and firing of
14-6
NAVMC 3500.44
16 Sep 08
the mortar, he supervises all other squad activities. His rank is Corporal
thru Sergeant and his T/O weapon is the service rifle/carbine.
Core Capabilities:
1. Carry out the orders of the Mortar Section Leader or the Mortar Platoon
Commander.
2. Perform the tasks required of a Squad Leader in an 81mm Mortar Platoon.
3. Maintains the discipline, appearance, control, conduct, and welfare of
his squad.
4. Trains his squad in the performance of tasks that support platoon
training objectives.
5. Maintains the condition, care, and economical use of assigned weapons and
equipment.
6. Performs operator maintenance for and operates an M252 81mm mortar.
7. Performs operator maintenance for and is a proficient marksman with a
service rifle/carbine.
8. Emplaces and recovers an M18A1 Claymore mine.
9. Detects and marks a mine.
10. Performs individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
11. Utilizes smoke grenades and pyrotechnics for signaling, illumination,
and screening.
12. Perform self-aid and buddy aid.
13. Determines current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
14. Communicate using proper communications procedures with organic wired
and wireless communications.
15. Performs operator maintenance for and operates an M998 high-back HMMWV.
16. Writes and issues combat orders.
17. Performs fire and movement as an individual and as a member of a mortar
squad.
18. Controls the fire and movement of his 81mm mortar squad.
19. Locates, closes with, suppresses, and destroys the enemy by fire and
maneuver.
20. Repels an enemy assault by fire and close combat.
_______________________________________________________________________
BILLET: Forward Observer, 81mm Mortar Platoon, Weapons Company
The Forward Observer (FO) provides the eyes for the Fire Direction Center
(FDC) and is normally attached to a forward unit. He initiates and adjusts
mortar indirect fire, smoke, and illumination. He provides assistance to the
supporting unit commander in planning targets appropriate for the mortars.
His rank is Corporal and his T/O weapon is the service rifle/carbine.
Core Capabilities:
1. Perform the tasks required of a Forward Observer (FO) in the 81mm Mortar
Platoon.
2. Carry out the orders of the Fire Direction Center (FDC) Plotter.
3. Performs individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
4. Locates, closes with, suppresses, and destroys the enemy by fire and
maneuver.
5. Performs fire and movement as an individual and as a member of a mortar
squad.
14-7
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carry out the orders of the Plotter.
2. Perform the tasks required of a Driver and a Recorder in the Fire
Direction Center (FDC) of the 81mm Mortar Platoon.
3. Performs operator maintenance for and is a proficient marksman with a
service rifle/carbine.
4. Emplaces and recovers an M18A1 Claymore mine.
5. Detects and marks a mine.
6. Utilizes smoke grenades and pyrotechnics for signaling, illumination, and
screening.
7. Determines current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
8. Perform self-aid and buddy aid.
9. Performs individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
10. Communicate using proper communications procedures with organic wired
and wireless communications.
11. Performs operator maintenance for and operates an M998 high-back HMMWV.
12. Performs fire and movement as an individual and as a member of a mortar
squad.
13. Locates, closes with, suppresses, and destroys the enemy by fire and
maneuver.
14. Repels an enemy assault by fire and close combat.
____________________________________________________________________________
14-8
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carry out the orders of the Plotter.
2. Perform the tasks required of a Plotter and a Recorder in the Fire
Direction Center (FDC) of the 81mm Mortar Platoon.
3. Performs operator maintenance for and is a proficient marksman with an
M16 series service rifle.
4. Operates an M16 plotting board and M19 plotting board.
5. Emplaces and recovers an M18A1 Claymore mine.
6. Detects and marks a mine.
7. Utilizes smoke grenades and pyrotechnics for signaling, illumination, and
screening.
8. Determines current location and traverses designated points using a
topographic map, lensatic compass, and protractor.
9. Perform self-aid and buddy aid.
10. Performs individual protective measures to counteract the effects of
nuclear, biological, and chemical contamination.
11. Communicate using proper communications procedures with organic wired
and wireless communications.
12. Performs operator maintenance for and operates an M998 high-back HMMWV.
13. Performs fire and movement as an individual and as a member of a mortar
squad.
14. Locates, closes with, suppresses, and destroys the enemy by fire and
maneuver.
15. Repels an enemy assault by fire and close combat.
_______________________________________________________________________
BILLET: Plotter, 81mm Mortar Platoon, Weapons Company
The Plotter operates in the Fire Direction Center (FDC). He records firing
data and maintains the mortar logs. He communicates firing data to the gun
line via wire. He serves as the primary plotting board operator. His rank
is Corporal and his T/O weapon is the service rifle/carbine.
Core Capabilities:
1. Carry out the orders of the Mortar Section Leader or the Mortar Platoon
Commander.
2. Perform the tasks required of a Plotter in the Fire Direction Center
(FDC) of the 81mm Mortar Platoon.
3. Maintains the discipline, appearance, control, conduct, and welfare of
his Fire Direction Center (FDC).
4. Trains his Fire Direction Center (FDC) in the performance of tasks that
support platoon training objectives.
5. Maintains the condition, care, and economical use of assigned weapons and
equipment.
6. Operates an M16 plotting board and M19 plotting board.
7. Performs operator maintenance for and is a proficient marksman with a
service rifle/carbine and an M249 squad automatic weapon.
8. Emplaces and recovers an M18A1 Claymore mine.
9. Detects and marks a mine.
14-9
NAVMC 3500.44
16 Sep 08
14-10
NAVMC 3500.44
16 Sep 08
14-11
NAVMC 3500.44
16 Sep 08
14-12
NAVMC 3500.44
16 Sep 08
CONDITION: Given a mounted SL-3 complete 60mm mortar, cleaning gear and
lubricants.
PERFORMANCE STEPS:
1. Disassemble the 60mm Mortar.
2. Clean the 60mm mortar.
3. Lubricate the 60mm mortar.
4. Inspect the 60mm mortar.
5. Maintain SL-3 components.
6. Maintain gun book.
REFERENCES:
1. TM 08206A-10/1A Operator's Manual, M224 60mm Lightweight Company Mortar
PERFORMANCE STEPS:
1. Receive ADDRAC.
2. Ensure ammunition man places the baseplate against the baseplate stake.
3. Ensure the assistant gunner moves in position and places the bi-pods in
front of the baseplate.
4. Connect barrel to base plate and bi-pods.
5. Ensure the ammunition man raises the elevation 15-17 turns.
6. Retrieve sight unit and set initial sight setting to 3200 mils deflection
and 1100 mils elevation.
14-13
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCRP 3-15.2A Mortars
CONDITION: Given a mounted SL-3 complete 60mm mortar, mounted in the upper
saddle, an SL-3 complete boresight, while wearing a fighting load.
PERFORMANCE STEPS:
1. Set deflection scales to 3200 mils and elevation scales to 0800 mils.
2. Attach boresight.
3. Select aiming point.
4. Move bi-pods to align sight on aiming point.
5. Check level bubbles and adjust if necessary.
6. Manipulate boresight to level the cross level and elevation bubbles.
7. Traverse mortar to align boresight on aiming point.
8. Recheck bubbles and adjust if necessary.
9. Adjust deflection and elevation scales to 0.
10. Align zero index lines.
11. Ensure boresight and mortar sight have proper sight picture.
12. Recheck bubbles and adjust if necessary.
13. Announce "Gun Up."
REFERENCES:
1. MCRP 3-15.2A Mortars
2. TM 08206A-10/1A Operator's Manual, M224 60mm Lightweight Company Mortar
14-14
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Check for mask and overhead clearance.
2. Ensure that the barrel is locked in the baseplate.
3. Ensure that the barrel is locked onto the collar by the locking knob.
4. Ensure the locking nut is hand tight.
5. Ensure bipod cable is spread taut.
6. Ensure the selector switch is on drop fire.
7. Ensure the barrel is clean and dry.
8. Inspect the ammunition.
REFERENCES:
1. MCRP 3-15.2A Mortars
0341-60mm-1106: Clear a misfire for a 60mm mortar in the hand held mode (B)
PERFORMANCE STEPS:
1. Squeeze trigger a second time to confirm malfunction.
2. Announce "Misfire."
3. Place firing selector on "S."
4. Without inverting the cannon, attempt to dislodge round by bouncing the
mortar at least 6 inches from the ground.
5. Place firing selector on "T."
6. Squeeze trigger twice.
7. If round does not fire, place firing selector on "S" and support the
mortar with sandbags, logs or empty ammo boxes and check for heat with
finger tips from just below the muzzle to the base (during peacetime, the
squad should back off the gun line 50 meters).
8. Allow cannon to cool.
9. Lift base cap end of cannon.
10. Ensure assistant gunner places hands around muzzle.
11. If round slides out of cannon, ensure assistant gunner stops the round
with his thumbs, removes it from bore, and passes it to the ammunition
handler.
12. Ensure ammunition man inspects the round and reinserts the safety pin.
13. Ensure ammunition man places suspect round in misfire pit, if necessary.
14-15
NAVMC 3500.44
16 Sep 08
14. If round will not slide out of cannon, ensure cannon is maintained in a
horizontal position and pointed down range.
15. Notify EOD.
REFERENCES:
1. TM 08206A-10/1A Operator's Manual, M224 60mm Lightweight Company Mortar
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. If you get two misfires in a row, stop firing and notify unit armory.
2. Do not put hands on base cap when lifting and holding the breech end of
cannon tube.
3. After lifting mortar out of baseplate, never allow breech cap end to go
below horizontal position until the round is removed.
4. Never put your hands behind or in front of the muzzle.
5. Never attempt to remove a misfired round from a hot cannon.
6. Trigger firing with an unseated baseplate is prohibited in the
conventional mode.
7. When waiting for canon to cool, it is acceptable to assist in the
cooling process by pouring water on the cannon.
PERFORMANCE STEPS:
1. Ensure the ammunition man prepares the ammunition.
2. Assume position behind the weapon.
3. Place fire selector on "T."
4. Ensure the assistant gunner loads round and assumes safe firing position.
5. Estimate range and lay weapon on target.
6. Squeeze the trigger.
7. Observe the impacts and make corrections.
8. Repeat steps 4 through 6 until the rounds have effect on target.
14-16
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. TM 08206A-10/1A Operator's Manual, M224 60mm Lightweight Company Mortar
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B643 Cartridge, 60mm High Explosive M888 2
B642 Cartridge, 60mm High Explosive M720 2
RANGE/TRAINING AREA:
Facility Code 17670 Mortar Range
Facility Code 17430 Impact Area Dudded
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. If you get two misfires in a row, stop firing and notify unit armory.
2. Do not put hands on base cap when lifting and holding the breech end of
cannon tube.
3. After lifting mortar out of baseplate, never allow breech cap end to go
below horizontal position until the round is removed.
4. Never put your hands behind or in front of the muzzle.
5. Never attempt to remove a misfired round from a hot cannon.
6. Trigger firing with an unseated baseplate is prohibited in the
conventional mode.
7. When waiting for canon to cool, it is acceptable to assist in the
cooling process by pouring water on the cannon.
PERFORMANCE STEPS:
1. Announce "MISFIRE."
2. Ensure assistant gunner braces bipod.
3. Kick the barrel twice.
4. If round fires, the mortar is re-laid and firing is continued.
5. If round does not fire, place firing selector on "T."
6. Squeeze trigger twice.
7. If round still does not fire, place firing selector on "S" (during
14-17
NAVMC 3500.44
16 Sep 08
peacetime, the squad should back off the gun line 50 meters).
8. Allow cannon to cool.
9. Remove sight unit.
10. Lower cannon to lowest elevation.
11. Loosen collar knob.
12. Rotate cannon 90 degrees toward gunner.
13. Lift base cap out of the baseplate.
14. Lift breech end of cannon.
15. Ensure assistant gunner places hands around muzzle.
16. If round slides out of cannon, ensure assistant gunner stops the round
with his thumbs, removes it from bore, and passes it to the ammunition
handler.
17. Ensure ammunition man inspects the round and reinserts the safety pin.
18. Ensure ammunition man places suspect round in misfire pit, if necessary.
19. If round will not slide out of cannon, remove cannon from bipod and ensure
cannon is taken to the misfire pit.
20. Notify EOD.
REFERENCES:
1. TM 08206A-10/1A Operator's Manual, M224 60mm Lightweight Company Mortar
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. If you get two misfires in a row, stop firing and notify unit armory.
2. Do not put hands on base cap when lifting and holding the breech end of
cannon tube.
3. After lifting mortar out of baseplate, never allow breech cap end to go
below horizontal position until the round is removed.
4. Never put your hands behind or in front of the muzzle.
5. Never attempt to remove a misfired round from a hot cannon.
6. Trigger firing with an unseated baseplate is prohibited in the
conventional mode.
7. When waiting for canon to cool, it is acceptable to assist in the
cooling process by pouring water on the cannon.
CONDITION: Given a mounted SL-3 complete 81mm mortar, cleaning gear and
lubricants.
14-18
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Disassemble the 81mm Mortar.
2. Clean the 81mm Mortar.
3. Lubricate the 81mm Mortar.
4. Inspect the 81mm Mortar.
5. Maintain SL-3 components.
6. Maintain gun book.
REFERENCES:
1. TM 09922A-10/1 M252 81mm Mortar Operator's Manual
PERFORMANCE STEPS:
1. Ensure the ammunition man places the baseplate against the baseplate
stake.
2. Ensure the assistant gunner attaches the barrel to the base plate.
3. Place bipods in position and attach the barrel to bipods.
4. Retrieve sight unit and set initial sight setting to 3200 mils deflection
and 1100 mils elevation.
5. Place sight unit on the weapon.
6. Perform 5-step crew drill.
7. Obtain proper sight picture.
8. Announce "Gun Up."
REFERENCES:
1. MCRP 3-15.2A Mortars
14-19
NAVMC 3500.44
16 Sep 08
CONDITION: Given a mounted, SL-3 complete 81mm mortar, and an SL-3 complete
boresight, while wearing a fighting load.
PERFORMANCE STEPS:
1. Set deflection scales to 6400 mils and elevation scales to 0800 mils.
2. Attach boresight.
3. Select an aiming point at least 200 meters away.
4. Move bi-pods to align sight on aiming point.
5. Check level bubbles and adjust if necessary.
6. Manipulate boresight to level the cross level and elevation bubbles.
7. Traverse mortar to align boresight on aiming point.
8. Recheck bubbles and adjust if necessary.
9. Adjust deflection and elevation scales to 0.
10. Ensure boresight and mortar sight have proper sight picture.
11. Recheck bubbles and adjust if necessary.
12. Announce "Gun Up."
REFERENCES:
1. MCRP 3-15.2A Mortars
PERFORMANCE STEPS:
1. Check for mask and overhead clearance.
2. Ensure the barrel is locked in the baseplate.
3. Ensure the firing pin recess is straight up and to the rear.
4. Ensure the bipod locking latch is locked, securing the barrel.
5. Ensure the leg locking handwheel is hand tight and teeth are meshed.
6. Ensure barrel is clean and dry.
7. Inspect the ammunition.
REFERENCES:
1. MCRP 3-15.2A Mortars
14-20
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Announce "MISFIRE."
2. Ensure assistant gunner braces bipod.
3. Kick the barrel twice.
4. If round fires, the mortar is re-laid and firing is continued.
5. If round does not fire, allow cannon to cool (during peacetime, the squad
should back off the gun line 50 meters).
6. Remove sight unit.
7. Lower cannon to lowest elevation.
8. Remove firing pin.
9. Loosen collar.
10. Rotate cannon 90 degrees toward gunner.
11. Lift breech plug out of the baseplate.
12. Lift breech end of cannon.
13. Ensure assistant gunner places hands around muzzle.
14. If round slides out of cannon, ensure assistant gunner stops the round
with his thumbs, removes it from bore, and passes it to the ammunition
handler.
15. Ensure ammunition man inspects the round and reinserts the safety pin.
16. Ensure ammunition man places suspect round in misfire pit, if necessary.
17. If round will not slide out of cannon, ensure cannon is maintained in a
horizontal position and pointed down range.
18. Notify EOD.
REFERENCES:
1. TM 09922A-10/1 M252 81mm Mortar Operator's Manual
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. If you get two misfires in a row, stop firing and notify unit armory.
2. Do not put hands on base cap when lifting and holding the breech end of
cannon tube.
3. After lifting mortar out of baseplate, never allow breech cap end to go
below horizontal position until the round is removed.
4. Never put your hands behind or in front of the muzzle.
5. Never attempt to remove a misfired round from a hot cannon.
14-21
NAVMC 3500.44
16 Sep 08
CONDITION: Given a fire command with a deflection change less than or equal
to 60 mils and a mounted mortar, while wearing a fighting load.
PERFORMANCE STEPS:
1. Receive a fire command.
2. Place the deflection and elevation settings on the sight unit.
3. Lay the mortar for elevation.
4. Traverse onto the aiming stakes to achieve proper sight picture.
5. Announce "Gun Up."
REFERENCES:
1. MCRP 3-15.2A Mortars
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Squad leader should check gun to ensure exercise was performed
correctly.
14-22
NAVMC 3500.44
16 Sep 08
CONDITION: Given a fire command with a deflection change greater than 60 mils
and a mounted mortar, while wearing a fighting load.
PERFORMANCE STEPS:
1. Receive a fire command.
2. Place the deflection and elevation settings on the sight unit.
3. Obtain center traverse.
4. Move the bipods to achieve sight picture.
5. Rough level the cross-level bubble.
6. Level elevation bubble.
7. Adjust collar clamp assembly placement on the barrel, if necessary.
8. Level the cross-level bubble.
9. Traverse onto the aiming post to achieve proper sight picture.
10. Announce "Gun Up."
REFERENCES:
1. MCRP 3-15.2A Mortars
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Squad leader should check gun to ensure exercise was performed
correctly. The mortar should be within two turns of center traverse, the
open end of the socket cap must continue to face the direction of fire.
PERFORMANCE STEPS:
1. Receive administrative deflection.
2. Place data on sight unit.
3. Level weapon system and achieve proper sight picture.
4. Receive "adjusting guns did hit" deflection.
14-23
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MCRP 3-15.2A Mortars
STANDARD: To ensure the weapon system is mission ready within one minute and
55 seconds (1:55).
PERFORMANCE STEPS:
1. Lay mortar in general direction of fire.
2. Receive command.
3. Refer sights to aiming circle.
4. Announce "Aiming point identified."
5. Receive deflection from aiming circle operator.
6. Place data on sights.
7. Perform 5-step crew drill, relaying gun to aiming circle.
8. Announce "Gun ready for recheck."
9. Repeat steps 5 - 7 until within 1 mil of aiming circle deflection.
10. Announce "Gun zero to one mil out, gun laid."
11. Receive refer deflection.
12. Place refer deflection.
13. Ensure the ammunition man is positioned to realign aiming posts.
14. Lay in aiming posts.
REFERENCES:
1. MCRP 3-15.2A Mortars
14-24
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Estimate range to target.
2. Determine initial elevation setting and place on sights.
3. Place a 3200 mil deflection on the sight.
4. Lay gun on the center of the target.
5. Fire initial round.
6. Refer the sights onto the burst.
7. If necessary, perform 5-step crew drill to relay gun on target.
8. Adjust rounds for range.
9. Level the elevation.
10. Continue adjustments as necessary.
REFERENCES:
1. MCRP 3-15.2A Mortars
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B643 Cartridge, 60mm High Explosive M888 2
B642 Cartridge, 60mm High Explosive M720 2
C869 Cartridge, 81mm HE M889/M889A1 with 4
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
14-25
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Receive and repeat a fire command.
2. Receive data and place the data on the sight.
3. Prepare gun for mission.
4. Lay mortar on the aiming posts.
5. Announce "Gun Up."
6. On command, ensure the assistant gunner half-loads and fires the initial
round.
7. Manipulate the traverse and elevation hand crank the appropriate number of
turns.
8. Re-level the cross level bubble.
9. On command, ensure the assistant gunner half loads and fires each
subsequent round.
10. Repeat steps 7-9 until all rounds required by the fire command are
expended.
REFERENCES:
1. MCRP 3-15.2A Mortars
2. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B643 Cartridge, 60mm High Explosive M888 2
B642 Cartridge, 60mm High Explosive M720 2
C869 Cartridge, 81mm HE M889/M889A1 with 4
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The total number of rounds and turns between rounds will be given to
the mortar squad prior to execution of event by the FDC, or FO if operating
without an FDC.
CONDITION: Given a fire command, mortar ammunition, and a fuse wrench, while
wearing a fighting load.
14-26
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Remove cartridge from container.
2. Inspect the round.
3. Set the fuse.
4. Reduce the charge.
5. Remove safety wires.
REFERENCES:
1. MCRP 3-15.2A Mortars
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B643 Cartridge, 60mm High Explosive M888 1
B647 Cartridge, 60mm Illuminating M721 1
RANGE/TRAINING AREA:
Facility Code 17670 Mortar Range
Facility Code 17430 Impact Area Dudded
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Live fire range and impact area suitable for mortars (if live
ammunition is used).
2. Expenditure of ammunition is not required. All available DODICs should
be use to complete this task to standard.
CONDITION: Given a fire command, mortar ammunition, and a fuse wrench, while
wearing a fighting load.
PERFORMANCE STEPS:
1. Remove cartridge from container.
2. Inspect the round.
3. Set the fuse.
REFERENCES:
1. MCRP 3-15.2A Mortars
14-27
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
C869 Cartridge, 81mm HE M889/M889A1 with 1
C871 Cartridge, 81mm Illuminating M853A1 1
RANGE/TRAINING AREA:
Facility Code 17670 Mortar Range
Facility Code 17430 Impact Area Dudded
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Live fire range and impact area suitable for mortars (if live
ammunition is used).
2. Expenditure of ammunition is not required. All available DODICs should
be use to complete this task to standard.
14-28
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Position must allow for the following:
2. Mission accomplishment.
3. Support of tactical situation.
4. Maximum range.
5. Target area coverage.
6. Survivability.
7. Overhead and mask clearance.
8. Adequate surface conditions.
9. Communications.
10. Access to routes.
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
PERFORMANCE STEPS:
1. Ensure baseplate position is marked.
2. Ensure mortar pit is three (3) rifle/carbine lengths wide.
3. Ensure mortar pit is 1.5 rifle/carbine lengths deep.
4. Ensure all walls or parapets above ground are at least one (1)
rifle/carbine length thick.
14-29
NAVMC 3500.44
16 Sep 08
5. Ensure distant aiming point and all aiming posts are visible through all
elevation and deflection settings.
6. Ensure that ammunition bunkers have been constructed.
7. Ensure ammo bunkers are two (2) rifle/carbine lengths wide, one (1)
ammunition box deep, and two (2) ammunition boxes high.
8. Ensure bunker is separated into four (4) sections by ammunition boxes
stacked on their side.
9. Ensure ammunition boxes form the floor.
10. Ensure top of bunker is enclosed by dirt filled ammunition boxes to
provide protection and are supported by "u" shaped supports.
11. Ensure ammunition boxes are waterproofed and covered by 18 inches of dirt
and sandbags.
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
PERFORMANCE STEPS:
1. Place the compass over the surveyed point and level the compass on the
aiming circle tripod, as required.
2. Remove all magnetic attractions from the area, as required.
3. Sight in on the azimuth marker.
4. Recheck the sight picture and verify the known azimuth.
REFERENCES:
1. MCRP 3-15.2A Mortars
SUPPORT REQUIREMENTS:
EQUIPMENT:
1. Compass
2. Aiming circle tripod
3. Declination station
14-30
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Setup aiming circle tripod.
2. Level aiming circle tripod.
3. Remove the tripod head cover.
4. Open the baseplate cover of the aiming circle head. Keeping the baseplate
cover pointed toward you, thread the tripod guide screw assembly into the
aiming circle until it is firmly seated. The base of the aiming circle
should not protrude over the machine surface of the tripod head.
5. Remove aiming circle cover and hang from tripod head cover.
6. If the instrument is to be set up over an orienting point, attach the
plumb bob to the hook. Adjust the tripod legs and aiming circle head until
it is over the point.
7. Loosen the leveling screws to expose sufficient threads (3/8 to 1/2 inch)
on the three screws to permit the instrument to be leveled. Number the
leveling screws clockwise: 1, 2, and 3.
8. Place the tubular level vial over the notation pad.
9. Grasp leveling screw number 1 between the thumb and forefinger of the
right hand, and grasp leveling screw number 2 between the thumb and
forefinger of the left hand.
10. Turn the screws so that the thumbs move toward or away from each other.
Using these two leveling screws, center the bubble. The bubble moves in
the same direction as the left thumb.
11. Rotate the aiming circle head until the magnifier is over the notation
pad.
12. Level the tubular level by turning only level screw number 3. The bubble
should now remain level in any direction that the aiming circle is
rotated. A variation of one graduation from the center of the vial is
acceptable.
13. If the bubble does not remain level, repeat this procedure.
REFERENCES:
1. MCRP 3-15.2A Mortars
14-31
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Set up and fine level the aiming circle directly over the declination
station marker using the plumb bob.
2. Place the grid azimuth of the first azimuth marker on the scales using the
recording motion. Place the vertical cross line of the telescope on the
azimuth marker using the nonrecording (orienting) motion. The aiming
circle is now oriented on grid north.
3. With the recording motion, rotate the instrument to zero. Release the
magnetic needle and look through the magnifier. Center the north-seeking
needle using the recording motion, and then relock the magnetic needle.
4. Notice the new azimuth on the scale, which is the declination constant.
Record it.
5. Recheck the aiming circle level and repeat steps 2 through 4 using the
remaining azimuth markers until three readings have been taken. If there
is only one marker, repeat the entire procedure twice using the same
marker.
6. Find the average declination constant using these three readings.
REFERENCES:
1. MCRP 3-15.2A Mortars
SUPPORT REQUIREMENTS:
EQUIPMENT:
1. SL-3 complete aiming circle
2. Declination station
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Aiming circle needs to be declinated every 25 miles of movement, after
an electrical storm, every 30 days, and when it is initially received.
PERFORMANCE STEPS:
1. Analyze the mission using METT-T and OKOCAW.
2. Consider the characteristics/capabilities of the 60mm and the 81mmm
mortar.
3. Consider techniques of fire.
4. Consider employment of mortars in the offense and defense.
14-32
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 7-90 Tactical Employment of Mortars
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Coordinate with adjacent and supported units for 60mm mortars.
PERFORMANCE STEPS:
1. Select an area 100 meters from the nearest mortar position, parked
vehicles, and ammunition piles.
2. Select an area clear of dead grass and brush for at least 30 meters wide.
3. Place increments on ground.
4. Form a row 4-6 inches wide and as long as necessary.
5. Do not pile increments more than 1-2 inches high.
6. End train of increments with a row of single increments, followed by at
least 1 meter of dry grass or dead leaves.
7. Announce "Burning Increments" and do not look at the fire.
8. Ignite dry grass or leaves.
9. Allow ensuing fire to self-extinguish.
10. Destroy increments daily.
REFERENCES:
1. TM 09206A-10/1A Operator's Manual, M224 60mm Lightweight Company Mortar
2. TM 09922A-10/1 M252 81mm Mortar Operator's Manual
0341-CFF-2501: Adjust mortar fire without a Fire Direction Center (FDC) (A)
14-33
NAVMC 3500.44
16 Sep 08
STANDARD: To issue corrections within 30 seconds and achieve Fire For Effect
(FFE) on the target.
PERFORMANCE STEPS:
1. Forward Observer (FO) makes all his deviation corrections with respect to
the Gun-Target (GT) line rather than with respect to the Observer-Target
(OT) line.
2. FO makes all corrections in mils or turns of the traversing handwheel (the
FO should consistently use one or the other method and not mix the two).
3. FO gives deviation correction to gunner in mils, read directly from his
binos. This correction is applied to the initial sight setting by the
gunner using LARS.
4. Using firing tables or elevation hand crank method, adjust rounds using
bracketing method.
5. Adjustments will continue until the mortar crew achieves effects within
effective casualty radius of the target.
REFERENCES:
1. MCRP 3-15.2A Mortars
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
B643 Cartridge, 60mm High Explosive M888 4
C869 Cartridge, 81mm HE M889/M889A1 with 4
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
PERFORMANCE STEPS:
1. Determine observer target direction.
2. Remove the lens cover.
3. Set the PWR switch at "ON."
4. Aim the laser at the target.
14-34
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 6-30 Tactics, Techniques, and Procedures for Observed Fire
2. MCWP 3-16.6A Supporting Arms Observer, Spotter and Controller (FMFM 6-8)
3. TM 11-5860-201-10 Laser Infrared Observation Set AN/GVS-5
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
C869 Cartridge, 81mm HE M889/M889A1 with 4
RANGE/TRAINING AREA:
Facility Code 17430 Impact Area Dudded
Facility Code 17670 Mortar Range
PERFORMANCE STEPS:
1. Record observer identification and warning order.
2. Record target location.
3. Record target description, method of engagement, method of fire and
control.
4. Send proper message to observer.
5. Record subsequent corrections.
6. Record refinement, Record as Target, End of Mission, and surveillance
statement.
REFERENCES:
1. MCRP 3-15.2B Mortar Gunnery
14-35
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. GRID METHOD.
a. For observed firing chart, the grid coordinates must be plotted on the
map and a direction and distance determined from the mortar position to
the target.
b. For modified and surveyed charts, index '0' and plot the target using
grid coordinates.
c. Determine firing data.
2. SHIFT METHOD.
a. For all firing charts, the known point must be plotted on the firing
chart.
b. Index the OT direction and apply corrections as given in the call for
fire.
c. Determine firing data.
3. POLAR METHOD.
a. Plot the FO position on the plotting board.
b. Index OT direction and apply distance from the FO given in call for
fire.
c. Determine firing data.
REFERENCES:
1. MCRP 3-15.2B Mortar Gunnery
STANDARD: To talk the observer through a call for fire sequence in order to
issue fire commands.
14-36
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Identify observer as friendly.
2. Assist the observer in finding his location.
3. Assist the observer in target location using the shift, grid, or polar
method or terrain association.
4. Ask the observer for the target description.
5. Ask the observer for the direction to the target.
6. Assist the observer in adjusting impact of rounds using the finger method
of adjusting.
7. Adjust fire.
8. Request Fire For Effect (FFE).
9. End mission.
REFERENCES:
1. MCRP 3-15.2A Mortars
2. MCRP 3-15.2B Mortar Gunnery
0341-FDC-2604: Inspect the plotting board for proper set up using the below
the pivot point method (D)
CONDITION: Given a prepared plotting board set up using the below the pivot
point method, a protractor, map pen, and map.
PERFORMANCE STEPS:
1. Plot the mortar position on a map.
2. Plot the enemy position or suspect area.
3. Using a map and protractor, determine the gun-target azimuth.
4. Index the azimuth disk to the gun-target azimuth.
5. Ensure the mortar position is plotted 1000 meters below the pivot point
for the 60mm, 2000 meters below the pivot point for the 81mm, and 500
meters left or right of the vertical index line.
6. Determine the mounting azimuth by using the rounding off rule. If the
grid direction of fire is not a direction ending in 50 or 00, round to the
nearest 50 mils.
7. Ensure the Squad Leaders know the mounting azimuth.
8. Ensure the referred deflection is written on the azimuth disk below the
mounting azimuth and numbered from right to left.
9. Ensure the forward observer position is plotted.
REFERENCES:
1. MCRP 3-15.2B Mortar Gunnery
14-37
NAVMC 3500.44
16 Sep 08
0341-FDC-2605: Inspect the plotting board for proper set up using the pivot
point method (D)
CONDITION: Given a prepared plotting board set up using the pivot point
method, a protractor, map pen, and map.
PERFORMANCE STEPS:
1. Determine an azimuth to the target using a map and protractor.
2. Round the azimuth to the nearest 50 mils to determine the mounting
azimuth.
3. Ensure the referred deflection is superimposed on the azimuth disk under
the mounting azimuth.
4. Ensure the deflection scale is numbered from left to right.
5. Ensure the disk is numbered at least 400 mils left and right of the
referred deflection.
REFERENCES:
1. MCRP 3-15.2B Mortar Gunnery
0341-FDC-2606: Compute firing data using the below the pivot point method (C)
STANDARD: To within 10 mils of the check board for deflection and 25 meter
tolerance on range.
PERFORMANCE STEPS:
1. Determine mounting azimuth by rounding to the nearest 50 mils.
2. Superimpose the referred deflection.
3. Number the disk using the LARS method.
4. Index the direction obtained from the map.
5. Drop below the pivot point (1000 meters fro 60mm mortars, 3000 meters for
81mm mortars) and left or right 500 meters and plot the mortar position.
6. Ensure the azimuth disk is still indexed on the gun target azimuth and
plot the first round at the range determined using the parallel line
14-38
NAVMC 3500.44
16 Sep 08
method of plotting.
7. Determine firing data by reading deflection and obtain elevation data from
the TFT.
8. Apply adjustments by indexing the OT direction on the disk and apply
corrections from last plot.
REFERENCES:
1. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
EQUIPMENT:
1. Plotting Board
2. Mortar Ballistic Computer
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Ensure all FDC personnel can perform Grid, Polar, and Shift methods of
target location using this plotting board set up.
0341-FDC-2607: Compute firing data using the pivot point method (C)
STANDARD: To within 10 mils of the check board for deflection and 25 meter
tolerance on range.
PERFORMANCE STEPS:
1. Determine mounting azimuth by rounding to the nearest 50 mils.
2. Superimpose the referred deflection.
3. Number the disk using the LARS method.
4. Index the direction obtained from the map.
5. Plot the first range determined over the vertical center line.
6. Determine firing data by reading deflection and obtain elevation data from
the TFT.
7. Apply adjustments by indexing the OT direction on the disk and apply
corrections from last plot.
REFERENCES:
1. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
14-39
NAVMC 3500.44
16 Sep 08
EQUIPMENT:
1. Plotting Board
2. Mortar Ballistic Computer
3. Computer Record Sheet (DD-2239)
4. TFT
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Ensure all FDC personnel can perform Grid, Polar, and Shift methods of
target location using this plotting board set up.
0341-FDC-2608: Set up the plotting board using the modified observer firing
chart method (C)
STANDARD: To within 10 mils of the check board for deflection and 25 meter
tolerance on range.
PERFORMANCE STEPS:
1. Determine grid intersection.
2. Superimpose the referred deflection under the mounting azimuth.
3. Number the disk using the LARS method.
4. Index an azimuth of 0 on disk.
5. Drop down 2000 meters below the pivot point and write in the east/west
indicator on the vertical center line.
6. Move left 2000 meters from the pivot point on the horizontal center line
and write the north/south indicator.
7. Complete the grid system by writing in the other north/south, east/west
grid numbers on every other heavy dark line, as though looking at a map.
(right and up)
8. Plot mortar position.
REFERENCES:
1. MCRP 3-15.2A Mortars
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Ensure all FDC personnel can perform Grid, Polar, and Shift methods of
target location using this plotting board set up.
14-40
NAVMC 3500.44
16 Sep 08
CONDITION: Given a Call for Fire (CFF) and FDC tools, while operating in the
Fire Direction Center (FDC).
PERFORMANCE STEPS:
1. Receive call for fire.
2. Prepare eight elements of initial fire command from information in call
for fire.
3. Send "Mortars to Follow."
4. Send shell and fuze.
5. Send Mortar to fire.
6. Send method to fire.
7. Send deflection.
8. Send charge.
9. Send time setting.
10. Send elevation.
11. Receive adjustments from forward observer.
12. Send subsequent fire commands to gunline.
REFERENCES:
1. MCRP 3-15.2A Mortars
2. MCRP 3-15.2B Mortar Gunnery
SUPPORT REQUIREMENTS:
EQUIPMENT:
1. Plotting board
2. Mortar Ballistic Computer
3. Radio
4. Computer Record Sheet (DA 2399)
5. TFT
14-41
NAVMC 3500.44
16 Sep 08
CHAPTER 15
PARAGRAPH PAGE
15-1
NAVMC 3500.44
16 Sep 08
CHAPTER 15
15000. PURPOSE. This chapter details the individual events that pertain to
the community. These events are linked to a service-level Mission Essential
Tasks (MET). This linkage tailor’s individual training for the selected MET.
Each individual event provides an event title, along with the conditions
events will be performed under, and the standard to which the event must be
performed to be successful.
15001. ADMINISTRATIVE NOTES. T&R events are coded for ease of reference.
Each event has a 4-4-4 digit identifier. The first four digits represent the
occupational field or military occupational field (0351). This chapter
contains 0351 Infantry Assaultman individual training events. The second
four digits represent the functional or duty area. The last four digits
represent the level, and identifier number of the event. Every individual
event has an identifier number from 001 to 999.
Core Capabilities:
1. Carries out the orders of the assault Team Leader.
2. Performs the tasks required of an Assistant Gunner in the assault section
of a weapons platoon and have the ability to perform the duties/tasks
required of the Gunner.
3. Performs operator maintenance for and operates a MK153 SMAW.
4. Constructs, emplaces, and detonates demolition charges.
5. Performs fire and movement as an individual and as a member of an assault
team.
6. Performs all basic 0300/0351 1000 level tasks and requirements.
____________________________________________________________________________
15-2
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carries out the orders of the assault Squad Leader.
2. Performs the tasks required of a Team Leader/Gunner in the assault
section of a weapons platoon and has the ability to perform the duties/tasks
of the Squad Leader.
3. Performs operator maintenance for, and operates a MK153 SMAW.
4. Constructs, emplaces, and detonates demolition charges.
6. Performs fire and movement as an individual and as a member of an assault
team.
7. Performs all basic 0300/0351 2000 level tasks.
8. Advises the commander(s) on the capabilities and employment of the
assault team.
___________________________________________________________________________
BILLET: Squad Leader/Team Leader/Gunner, Assault Section, Weapons Platoon
The assault Squad Leader carries out orders from the Section Leader, or the
unit commander. He is responsible for the discipline, appearance, training,
control, conduct, and welfare of his squad at all times, as well as the
condition, care, and economical use of his weapons and equipment. He is also
responsible for the tactical employment, fire discipline, fire control, and
maneuver of his squad. He is also trained in APOBS and advanced demolitions.
His rank is a Corporal. His T/O weapon is the service rifle/carbine and
SMAW.
Core Capabilities:
1. Carries out the orders of the assault Section Leader.
2. Performs the tasks required of a Squad Leader in the assault section of a
weapons platoon and has the ability to perform the duties/tasks of the
Section Leader.
3. Maintains the condition, care, and economical use of assigned personnel,
weapons, and equipment.
4. Constructs, emplaces, and detonates demolition charges.
5. Performs all 0300/0351 2000 level tasks.
6. Advises the commander(s) on the capabilities and employment of the
assault squad.
___________________________________________________________________________
BILLET: Section Leader, Assault Section, Weapons Platoon
The assault Section Leader carries out orders from the unit commander. He is
responsible for the discipline, appearance, training, control, conduct, and
welfare of his squads at all times, as well as the condition, care, and
economical use of their weapons and equipment. He is also responsible for
the tactical employment, fire discipline, fire control, and maneuver of his
section. He is also trained in APOBS and advanced demolitions. His rank is
a Sergeant. His T/O weapon is the Service Rifle/carbine.
Core Capabilities:
1. Carries out the orders of the weapons platoon commander.
15-3
NAVMC 3500.44
16 Sep 08
15-4
NAVMC 3500.44
16 Sep 08
15-5
NAVMC 3500.44
16 Sep 08
15-6
NAVMC 3500.44
16 Sep 08
CONDITION: Given an electric blasting cap, firing wire, a test set, cap
crimpers, and a blasting machine, while wearing a fighting load.
PERFORMANCE STEPS:
1. Test the blasting machine.
2. Test the tester.
3. Test the firing wire (spooled and unspooled).
4. Test electric blasting cap.
5. Shunt electric blasting cap to the firing wire.
6. Test completed circuit.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
M098 Cap, Blasting Electric Inert 1
M130 Cap, Blasting Electric M6 1
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This event can be conducted in conjunction with any demolition
construction task to serve as a required initiation set for that charge.
15-7
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Attempt to fire a maximum of three times in succession.
2. Disconnect firing wire from blasting machine.
3. Check circuit continuity.
4. Reconnect firing wire to blasting machine.
5. Attempt to fire a maximum of three more times in succession.
6. Check wire connections to terminals of blasting machine.
7. Attempt to fire a maximum of three more times in succession.
8. If still unsuccessful, change blasting machine.
9. Attempt to fire a maximum of three more times in succession.
10. If still unsuccessful, disconnect blasting machine.
11. Shunt firing wire.
12. Wait 30 minutes.
13. Emplace a one pound primed charge within 1ft of the misfired charge or a 2
pound primed charge within 1ft of a misfired tamped charge.
14. Detonate emplaced charge.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Do not attempt to remove or handle an electric blasting cap if you
suspect it is the problem. Place a primed, 1-pound charge next to the
misfired charge and detonate the new charge.
15-8
NAVMC 3500.44
16 Sep 08
CONDITION: Given a non-electric blasting cap, time fuse, a fuse igniter, and
cap crimpers, while wearing a fighting load.
PERFORMANCE STEPS:
1. Determine burn rate.
2. Cut appropriate amount of time fuse.
3. Crimp blasting cap to time fuse.
4. Attach fuse igniter.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
PERFORMANCE STEPS:
1. Wait 30 minutes from estimated time of detonation.
15-9
NAVMC 3500.44
16 Sep 08
2. Place a primed, 1 pound charge against the misfired charge and detonate
it.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
M097 Cap, Blasting Non-Electric Inert 1
M456 Cord, Detonating PETN Type I Class E 5 ft
M032 Charge, Demolition Block TNT 1-Pound 2
M131 Cap, Blasting Non-Electric M7 3
M670 Fuse, Blasting Time M700 30 ft
M766 Igniter, M60 for Time Blasting Fuse 2
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
PERFORMANCE STEPS:
1. Conduct mission analysis.
2. Cut detonation cord.
3. Attach branch lines, if necessary.
4. Prime Charge.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
M131 Cap, Blasting Non-Electric M7 1
M097 Cap, Blasting Non-Electric Inert 2
15-10
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Inert materials would enhance live fire training.
PERFORMANCE STEPS:
1. Construct a grapeshot.
2. Place the grapeshot in the appropriate direction in relation to the
target.
3. Fire the grapeshot charge upon command or upon entry of the enemy into the
kill zone.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
M098 Cap, Blasting Electric Inert 1
M023 Charge, Demolition Block M112 1-1/4 1
M130 Cap, Blasting Electric M6 1 each
M456 Cord, Detonating PETN Type I Class E 3 ft
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
15-11
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Inert materials would enhance live firing training.
PERFORMANCE STEPS:
1. Calculate the appropriate amount of explosives needed.
2. Place the charge on the target.
3. Cut the tree.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
M130 Cap, Blasting Electric M6 1
M098 Cap, Blasting Electric Inert 1
M023 Charge, Demolition Block M112 1-1/4 3
M097 Cap, Blasting Non-Electric Inert 2
M131 Cap, Blasting Non-Electric M7 2
M670 Fuse, Blasting Time M700 20
M766 Igniter, M60 for Time Blasting Fuse 2 each
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This charge can be initiated electrical or non-electrical.
15-12
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Conduct mission analysis.
2. Identify required charge and initiation set.
3. Gather materials.
4. Construct charge to accomplish mission.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The ammo listed with the respective charge should used to complete this
task.
Doughnut Charge
Detonation Cord Linear Charge
ULI - Knot Slider Charge
Oval Charge
Water Charge
15-13
NAVMC 3500.44
16 Sep 08
Fence Charge
Concrete Charge
Improvised Shape Charge
Grape Shot Charge
Improvised Bangalore Charge
Ribbon Cutting Charge
Saddle Cutting Charge
Diamond Cutting Charge
Timber Cutting Charge
PERFORMANCE STEPS:
1. Determine standoff distance.
2. Place the charge on target.
3. Prime charge.
4. Take cover.
5. Detonate charge.
RELATED EVENTS:
0351-DEMO-1210
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
15-14
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This charge can be initiated electrical or non-electrical.
2. The ordnance allocated to accomplish this task is found within each
specific type of charge.
3. Inert materials would enhance live fire training.
PERFORMANCE STEPS:
1. Conduct mission analysis.
2. Determine breaching tool for target.
3. Determine breaching method for target.
4. Breach target.
5. If breach fails, determine failed breach procedures.
6. Reattempt to breach target.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCWP 3-17.3 MAGTF Breaching Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
15-15
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Determine the appropriate method for breaching.
2. Breach the window.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCWP 3-17.3 MAGTF Breaching Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
PERFORMANCE STEPS:
1. Apply mathematical formula.
2. Use net explosive weight, calculate standoff distance.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCWP 3-17.3 MAGTF Breaching Operations
15-16
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Gather appropriate materials.
2. Assemble appropriate materials.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCWP 3-17.3 MAGTF Breaching Operations
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
M098 Cap, Blasting Electric Inert 2
M130 Cap, Blasting Electric M6 2
MN08 Igniter, Time Blasting Fuse with Sho 1
MN02 Dual instantaneous shock tube 1
M456 Cord, Detonating PETN Type I Class E 102 ft
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Inert materials would enhance live fire training.
PERFORMANCE STEPS:
1. Place the detonation cord oval charge on the target.
2. Prime the detonation cord oval charge with an initiation set.
3. Move to the appropriate standoff distance.
4. Detonate the detonation cord oval charge.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCWP 3-17.3 MAGTF Breaching Operations
SUPPORT REQUIREMENTS:
15-17
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This charge can be initiated electrical or non-electrical.
2. Inert materials can enhance live fire training.
PERFORMANCE STEPS:
1. Gather appropriate materials.
2. Assemble appropriate materials.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCWP 3-17.3 MAGTF Breaching Operations
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
MN02 Dual instantaneous shock tube 1
M130 Cap, Blasting Electric M6 2
M098 Cap, Blasting Electric Inert 2
MN08 Igniter, Time Blasting Fuse with Sho 1
M456 Cord, Detonating PETN Type I Class E 22 ft
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
15-18
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Inert materials can enhance live fire training.
PERFORMANCE STEPS:
1. Place the detonation cord linear charge on the door.
2. Prime the detonation cord linear charge with an initiation set.
3. Move to the appropriate standoff distance.
4. Detonate the detonation cord linear charge.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCWP 3-17.3 MAGTF Breaching Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This charge can be initiated electrical or non-electrical.
2. Inert materials can enhance live fire training.
15-19
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Gather appropriate materials.
2. Assemble appropriate materials.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCWP 3-17.3 MAGTF Breaching Operations
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
MN02 Dual instantaneous shock tube 1
M130 Cap, Blasting Electric M6 1
M098 Cap, Blasting Electric Inert 1
MN08 Igniter, Time Blasting Fuse with Sho 1
M456 Cord, Detonating PETN Type I Class E 3.5 ft
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Inert materials would enhance live fire training.
PERFORMANCE STEPS:
1. Place the doughnut charge on the door.
2. Prime the doughnut charge with an initiation set.
3. Move to the appropriate standoff distance.
4. Detonate the doughnut charge.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCWP 3-17.3 MAGTF Breaching Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
15-20
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This charge can be initiated electrical or non-electrical.
2. Inert materials would enhance live fire training.
PERFORMANCE STEPS:
1. Cut detonation cord.
2. Attach branch lines.
3. Prime the charge.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
M097 Cap, Blasting Non-Electric Inert 2
M131 Cap, Blasting Non-Electric M7 2
M456 Cord, Detonating PETN Type I Class E 80 ft
M670 Fuse, Blasting Time M700 20
M766 Igniter, M60 for Time Blasting Fuse 2 each
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Inert materials would enhance live fire training.
15-21
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Gather appropriate materials.
2. Assemble appropriate materials.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. NAVSEASWO 60-AA-MMA-010 Demolition Materials
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
MN02 Dual instantaneous shock tube 1
MN08 Igniter, Time Blasting Fuse with Sho 1
M130 Cap, Blasting Electric M6 1
M098 Cap, Blasting Electric Inert 1
M456 Cord, Detonating PETN Type I Class E 10 ft
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MATERIAL:
1. IV bags (or any plastic container that can hold water)
2. 550 cord
3. Suitable backing
4. Riggers/duct tape
5. Prop stake/material
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This charge can be initiated electrical or non-electrical.
2. Inert materials would enhance live fire training.
15-22
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Place the water charge on the target.
2. Prime the water charge with an initiation set.
3. Move to the appropriate standoff distance.
4. Detonate the water charge.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MATERIAL:
1. IV bags (or any plastic container that can hold water)
2. 550 cord
3. Suitable backing
4. Riggers/duct tape
5. Property stake/material
6. Free standing door assembly
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This charge can be initiated electrical or non-electrical.
2. Inert materials would enhance live fire training.
PERFORMANCE STEPS:
1. Gather appropriate materials.
2. Assemble appropriate materials.
15-23
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
M023 Charge, Demolition Block M112 1-1/4 3 each
MN02 Dual instantaneous shock tube 1
M098 Cap, Blasting Electric Inert 2
MN08 Igniter, Time Blasting Fuse with Sho 1
M130 Cap, Blasting Electric M6 2
M456 Cord, Detonating PETN Type I Class E 20 ft
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MATERIAL:
1. 2 trimble hooks or nails
2. Rigger's/duct tape
3. Surgical tubing
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Inert materials would enhance live fire training.
PERFORMANCE STEPS:
1. Place the fence charge on the target.
2. Prime the fence charge with an initiation set.
3. Move to the appropriate standoff distance.
4. Detonate the fence charge.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
SUPPORT REQUIREMENTS:
15-24
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MATERIAL:
1. 2 trimble hooks or nails
2. Rigger's /duct tape
3. Surgical tubing
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This charge can be initiated electrical or non-electrical.
2. Inert materials would enhance live fire training.
PERFORMANCE STEPS:
1. Gather appropriate materials.
2. Assemble appropriate materials.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
M130 Cap, Blasting Electric M6 2
MN08 Igniter, Time Blasting Fuse with Sho 1
M098 Cap, Blasting Electric Inert 2
MN02 Dual instantaneous shock tube 1
M456 Cord, Detonating PETN Type I Class E 20 each
15-25
NAVMC 3500.44
16 Sep 08
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MATERIAL:
1. Double-sided tape
2. Rubber
3. Rigger's/duct tape
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Inert materials would enhance live fire training.
PERFORMANCE STEPS:
1. Place the uli-knot slider charge on the door.
2. Prime the uli-knot slider charge with an initiation set.
3. Move to the appropriate standoff distance.
4. Detonate the uli-knot slider charge.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MATERIAL:
1. Double-sided tape
2. Rubber
3. Rigger's/duct tape
4. Free standing door assembly
MISCELLANEOUS:
15-26
NAVMC 3500.44
16 Sep 08
ADMINISTRATIVE INSTRUCTIONS:
1. This charge can be initiated electrical or non-electrical.
2. Inert materials would enhance live fire training.
PERFORMANCE STEPS:
1. Gather appropriate materials.
2. Assemble appropriate materials.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
M023 Charge, Demolition Block M112 1-1/4 6 each
MN08 Igniter, Time Blasting Fuse with Sho 1
MN02 Dual instantaneous shock tube 1
M130 Cap, Blasting Electric M6 2
M098 Cap, Blasting Electric Inert 2
M456 Cord, Detonating PETN Type I Class E 32 each
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MATERIAL:
1. Suitable backing
2. Rigger's/duct tape
3. Property stake/material
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Inert materials would enhance live fire training.
15-27
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Place the concrete charge on the concrete wall.
2. Prime the concrete charge with an initiation set.
3. Move to the appropriate standoff distance.
4. Detonate the concrete charge.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MATERIAL:
1. Suitable backing
2. Rigger's/duct tape
3. Property stake/materials
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This charge can be initiated electrical or non-electrical.
2. Inert materials would enhance live fire training.
BILLETS: Assaultman
15-28
NAVMC 3500.44
16 Sep 08
CONDITION: Given an SL-3 complete MK153 SMAW, authorized cleaning gear, and
lubricant.
PERFORMANCE STEPS:
1. Clear the MK153 SMAW.
2. Disassemble the MK153 SMAW.
3. Inspect the MK153 SMAW.
4. Clean the MK153 SMAW.
5. Lubricate the MK153 SMAW.
6. Assemble the MK153 SMAW.
7. Perform a function check on the MK153 SMAW spotting rifle.
8. Perform a function check on the MK153 SMAW launcher.
REFERENCES:
1. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
BILLETS: Assaultman
PERFORMANCE STEPS:
1. Clear the weapon.
2. Assume a firing position.
3. Insert encased rocket.
4. Insert magazine of spotting rounds.
5. Make weapon ready.
REFERENCES:
1. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17631 Light Antiarmor Weapons Range Live
MISCELLANEOUS:
15-29
NAVMC 3500.44
16 Sep 08
ADMINISTRATIVE INSTRUCTIONS:
1. Utilization of simulation can supplement and enhance live fire
training.
BILLETS: Assaultman
PERFORMANCE STEPS:
1. Select a firing site.
2. Assume a firing position.
3. Engage the target.
REFERENCES:
1. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
HX05 Rocket, 83mm Assault MK3 Mod 0 (SMAW 1
RANGE/TRAINING AREA:
Facility Code 17631 Light Antiarmor Weapons Range Live
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Utilization of simulation can enhance live fire training.
15-30
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Ensure the magazine is seated.
2. Cock the spotting rifle.
3. Attempt to fire.
REFERENCES:
1. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17631 Light Antiarmor Weapons Range Live
BILLETS: Assaultman
PERFORMANCE STEPS:
1. Shout misfire.
2. Continue to track target for 15 seconds.
3. Place the weapon on safe.
4. Charge the weapon.
5. Attempt to re-engage.
6. Repeat steps 1, 2 and 3.
7. Remove rocket encasement rotate 180 degrees and re-insert.
8. Repeat steps 4 and 5.
9. Repeat steps 1, 2 and 3.
10. Clear the weapon system.
11. Replace forward endcap on rocket encasement.
REFERENCES:
1. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
MISCELLANEOUS:
15-31
NAVMC 3500.44
16 Sep 08
ADMINISTRATIVE INSTRUCTIONS:
1. Expenditure of ammunition is not required to perform this task to
standard.
2. Utilization of simulation can supplement and enhance live fire
training.
BILLETS: Assaultman
PERFORMANCE STEPS:
1. Select a firing site.
2. Assume a firing position.
3. Prepare the limited-visibility sight for use.
4. Acquire a target using the limited-visibility sight.
5. Engage the target.
REFERENCES:
1. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
2. TM 10796-12&P Operators Manual for AN/PVS-17/17B/17C Miniature Night Sight
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
HX07 Rocket, 83mm HEAA Practice MK7 Mod 0 1
RANGE/TRAINING AREA:
Facility Code 17631 Light Antiarmor Weapons Range Live
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Utilization of simulation can enhance live fire training.
15-32
NAVMC 3500.44
16 Sep 08
BILLETS: Assaultman
CONDITION: Given an MK153 SMAW mounted with a target designator and loaded
with a rocket and a magazine of spotting rounds, while wearing night vision
goggles and a fighting load.
PERFORMANCE STEPS:
1. Select a firing site.
2. Assume a firing position.
3. Prepare the target designator for use.
4. Acquire a target using the target designator.
5. Engage the target.
REFERENCES:
1. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
2. TM 09500A-10/1 Operator's Manual Night Vision Goggles AN/PVS-7B and
AN/PVS-7D
3. TM 10271A-10/1 Operator's Manual, Monocular NVD, AN/PVS-14
4. TM 10470A-12&P/1A Operator's and Unit Maintenance Manual, Target Pointer
Illuminator/Aiming Light, AN/PEQ-2A
5. TM 11-5855-301-12&P Operator's and Unit Maintenance Manual, Light, Aiming,
Infrared, AN/PAQ-4B (IAL)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
HA34 Rckt 83mm HE, SMAW-NE, MK80-0 1
RANGE/TRAINING AREA:
Facility Code 17631 Light Antiarmor Weapons Range Live
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Utilization of simulation can enhance live fire training.
15-33
NAVMC 3500.44
16 Sep 08
BILLETS: Assaultman
PERFORMANCE STEPS:
1. Mount the limited-visibility sight to the MK153.
2. Prepare the MK153 SMAW spotting rifle for firing.
3. Assume a firing position.
4. Fire the spotting rifle at sight specific range.
5. Adjust the limited-visibility sight to the point of impact.
6. Repeat steps 4 and 5 until point-of-aim is point of impact.
REFERENCES:
1. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
2. TM 10796-12&P Operators Manual for AN/PVS-17/17B/17C Miniature Night Sight
3. TM 11-5855-213-10 Operator's Manual for Night Vision Sight Individual
Served Weapon AN/PVS-4
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
AX11 Cartridge, 9mm Spotting Rifle MK212 12
RANGE/TRAINING AREA:
Facility Code 17631 Light Antiarmor Weapons Range Live
BILLETS: Assaultman
15-34
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Mount the target designator to the MK153 SMAW.
2. Employ the night vision goggles.
3. Prepare the MK153 SMAW spotting rifle for firing.
4. Assume a firing position.
5. Fire the spotting rifle at designator specific range.
6. Adjust the limited-visibility sight designator to the point of impact.
7. Repeat steps 4 and 5 until point of aim is point of impact.
REFERENCES:
1. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
2. TM 09500A-10/1 Operator's Manual Night Vision Goggles AN/PVS-7B and
AN/PVS-7D
3. TM 10271A-10/1 Operator's Manual, Monocular NVD, AN/PVS-14
4. TM 10470A-12&P/1A Operator's and Unit Maintenance Manual, Target Pointer
Illuminator/Aiming Light, AN/PEQ-2A
5. TM 11-5855-301-12&P Operator's and Unit Maintenance Manual, Light, Aiming,
Infrared, AN/PAQ-4B (IAL)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
AX11 Cartridge, 9mm Spotting Rifle MK212 12
RANGE/TRAINING AREA:
Facility Code 17631 Light Antiarmor Weapons Range Live
0351-SMAW-1011: Engage a target with a MK153 SMAW Novel Explosive (NE) rocket
(D)
CONDITION: Given an SL-3 complete, bore sighted MK153 SMAW, a Novel Explosive
(NE), and a magazine of spotting rounds, while wearing a fighting load.
PERFORMANCE STEPS:
1. Select a firing site clear of obstructions and with a clear back-blast
area.
2. Ensure the gunner assumes a firing position.
3. Acquire a target using the telescopic sight.
4. Estimate range to target.
5. Set the estimated range on the outer selector drum (for the HE setting).
6. Ensure the temperature on the inner selector drum is set.
7. Place the weapon on the "FIRE" position.
8. Fire the spotting round at the target by squeezing the trigger, without
15-35
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
HA34 Rckt 83mm HE, SMAW-NE, MK80-0 1
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The spotting rifles' 9mm spotting round has a ballistic match to the
existing HEDP and HEAA rounds. Since the NE round is 1.7 lbs heavier, it
has a different trajectory. To compensate for this, the range drum on the
optical sight has been modified to provide an additional setting for firing
the NE round.
2. Pre-launch Considerations: Make sure that the MK153 SMAW launcher drum
has been modified for the NE.
3. Ranging the target: Iron sights are not calibrated to account for the
different trajectory of the NE round and will not be relied on for accurate
firing of the NE round. Therefore, use the telescopic sight to acquire the
target, and use above procedures to accurately fire the NE round.
15-36
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Illustrate hot or firing position with proper weapon symbol and a six-
digit grid.
2. Illustrate a known point and label back azimuth and distance from the
known point to the weapon position.
3. Illustrate left and right lateral limits and label azimuth.
4. Illustrate minimum and maximum engagement lines and label distance.
5. Illustrate anticipated target engagement area, and label it as ATEA.
6. Illustrate target reference points and label azimuth and distance.
7. Illustrate dead space.
8. Illustrate magnetic north.
9. Label marginal data with unit, type of position, date, and time.
REFERENCES:
1. FM 3-21.91 Tactical Employment of Anti-armor Platoons, Companies and
Battalions
2. MCRP 5-12A Operational Terms and Graphics
3. MCWP 3-15.5 Anti-armor Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
15-37
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Observe all warnings and caution.
2. Inspect shipping and storage container.
3. Inspect components of backpacks.
4. Inspect components of softpack.
5. Inspect serviceability of ancillary equipment.
6. Report discrepancies.
REFERENCES:
1. TM 013750-13&P Operators Manual MK-7 MOD. 1 Anti-Personnel Obstacle
Breaching System (APOBS)
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. This task can be trained using inert materials.
15-38
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Observe all warnings and cautions.
2. Prepare the APOBS for field transport.
3. Prepare the APOBS for deployment.
4. Select a firing position.
5. Assemble the APOBS for delay mode initiation.
6. Correctly aim the APOBS rocket.
7. Confirm correct assembly.
8. Initiate delay-mode firing of the APOBS.
9. Immediately move to minimum safe separation distance.
10. Take immediate action if misfire occurs.
11. Upon successful deployment, destroy residual energetic materials.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. TM 013750-13&P Operators Manual MK-7 MOD. 1 Anti-Personnel Obstacle
Breaching System (APOBS)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
MN79 Mine, Antipersonnel Obstacle Breachi 1
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. All performance steps leading to step 8 can be trained using inert
materials.
2. Ammunition requirements for the task are listed for each period of
instruction or class taught. They are not specific to an individual
Marine.
3. This task should be conducted only after training by an SNCO/Officer or
a school trained NCO. Local range/safety orders apply.
0351-APOB-2104: Breach a wire obstacle with an APOBS using the delay mode
initiation (D)
15-39
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Observe all warnings and cautions.
2. Prepare the APOBS for field transport.
3. Prepare the APOBS for deployment.
4. Select a firing position.
5. Assemble the APOBS for delay mode initiation.
6. Correctly aim the APOBS rocket.
7. Confirm correct assembly.
8. Initiate delay-mode firing of the APOBS.
9. Immediately move to minimum safe separation distance.
10. Take immediate action if misfire occurs.
11. Upon successful deployment, destroy residual energetic materials.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. TM 013750-13&P Operators Manual MK-7 MOD. 1 Anti-Personnel Obstacle
Breaching System (APOBS)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
MN79 Mine, Antipersonnel Obstacle Breachi 1
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. All performance steps leading to step 8 can be trained using inert
materials.
2. Ammunition requirements for the task are listed for each period of
instruction or class taught; they are not specific to an individual Marine.
3. This task should be conducted only after training by an SNCO/Officer or
a school trained NCO. Local range/safety orders apply.
0351-APOB-2105: Breach a wire obstacle with the APOBS using the electrical
command mode initiation (D)
15-40
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Observe all warnings and cautions.
2. Prepare the APOBS for field transport.
3. Prepare the APOBS for deployment.
4. Select a firing position.
5. Assemble the APOBS.
6. Test the blasting machine.
7. Test the firing wire.
8. Assemble the APOBS for command mode initiation.
9. Confirm correct assembly.
10. Correctly aim the APOBS rocket.
11. Move to minimum safe separation distance.
12. Fire the APOBS.
13. Take immediate action if misfire occurs.
14. Upon successful deployment, destroy residual energetic materials.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. TM 013750-13&P Operators Manual MK-7 MOD. 1 Anti-Personnel Obstacle
Breaching System (APOBS)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
MN79 Mine, Antipersonnel Obstacle Breachi 1
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. All performance steps leading to step 8 can be trained using inert
materials.
2. Ammunition requirements for the task are listed for each period of
instruction or class taught. They are not specific to an individual
Marine.
3. This task should be conducted only after training by an SNCO/Officer or
a school trained NCO. Local range/safety orders apply.
15-41
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Observe all warnings and cautions.
2. Prepare the APOBS for field transport.
3. Prepare the APOBS for deployment.
4. Select a firing position.
5. Assemble the APOBS.
6. Test the blasting machine.
7. Test the firing wire.
8. Assemble the APOBS for command mode initiation.
9. Confirm correct assembly.
10. Correctly aim the APOBS rocket.
11. Move to minimum safe separation distance.
12. Fire the APOBS.
13. Take immediate action if misfire occurs.
14. Upon successful deployment, destroy residual energetic materials.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. TM 013750-13&P Operators Manual MK-7 MOD. 1 Anti-Personnel Obstacle
Breaching System (APOBS)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
MN79 Mine, Antipersonnel Obstacle Breachi 1
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. All performance steps leading to step 8 can be trained using inert
materials.
2. Ammunition requirements for the task are listed for each period of
instruction or class taught. They are not specific to an individual
Marine.
3. This task should be conducted only after training by an SNCO/Officer or
a school trained NCO. Local range/safety orders apply.
0351-APOB-2107: Breach an anti-personnel mine with the APOBS using the non-
electrical command mode initiation (D)
15-42
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Observe all warnings and cautions.
2. Prepare the APOBS for field transport.
3. Prepare the APOBS for deployment.
4. Select a firing position.
5. Assemble the APOBS.
6. Assemble the APOBS for non-electrical command mode initiation.
7. Confirm correct assembly.
8. Correctly aim the APOBS rocket.
9. Move to minimum safe separation distance.
10. Fire the APOBS.
11. Take immediate action if misfire occurs.
12. Upon successful deployment, destroy residual energetic materials.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. TM 013750-13&P Operators Manual MK-7 MOD. 1 Anti-Personnel Obstacle
Breaching System (APOBS)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
MN79 Mine, Antipersonnel Obstacle Breachi 1
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. All performance steps leading to step 10 can be trained using inert
materials.
2. Ammunition requirements for the task are listed for each period of
instruction or class taught. They are not specific to an individual
Marine.
3. This task should be conducted only after training by a SNCO/Officer or
a school trained NCO. Local range/safety orders apply.
0351-APOB-2108: Breach an obstacle with the MK7 APOBS using the non-
electrical command mode initiation (D)
15-43
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Observe all warnings and cautions.
2. Prepare the APOBS for field transport.
3. Prepare the APOBS for deployment.
4. Select a firing position.
5. Assemble the APOBS.
6. Assemble the APOBS for non-electrical command mode initiation.
7. Confirm correct assembly.
8. Correctly aim the APOBS rocket.
9. Move to minimum safe separation distance.
10. Fire the APOBS.
11. Take immediate action if misfire occurs.
12. Upon successful deployment, destroy residual energetic materials.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. TM 013750-13&P Operators Manual MK-7 MOD. 1 Anti-Personnel Obstacle
Breaching System (APOBS)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
MN79 Mine, Antipersonnel Obstacle Breachi 1
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. All performance steps leading to step 10 can be trained using inert
materials.
2. Ammunition requirements for the task are listed for each period of
instruction or class taught. They are not specific to an individual
Marine.
3. This task should be conducted only after training by a SNCO/Officer or
a school trained NCO. Local range/safety orders apply.
15-44
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Re-insert safety pins and blast guards.
2. Break connections between packs.
3. Replace materials and close packs.
REFERENCES:
1. TM 013750-13&P Operators Manual MK-7 MOD. 1 Anti-Personnel Obstacle
Breaching System (APOBS)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
MN84 Demolition Kit, APOBS Inert 1
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. All performance steps can be trained using inert materials.
2. Ammunition requirements for the task are listed for each period of
instruction or class taught. They are not specific to an individual
Marine.
3. This task should be conducted only after training by a SNCO/Officer or
a school trained NCO. Local range/safety orders apply.
4. Only perform recovery procedures if firing pin-pull ring is intact and
rocket motor has not been initiated.
15-45
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Wait 60 minutes after the proposed time of detonation.
2. Place 1lb charge next to the closest grenade or the rear pack.
REFERENCES:
1. TM 013750-13&P Operators Manual MK-7 MOD. 1 Anti-Personnel Obstacle
Breaching System (APOBS)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
MN84 Demolition Kit, APOBS Inert 1
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
PERFORMANCE STEPS:
1. Attempt to initiate 2 additional times.
2. Check the firing device.
3. Attempt to fire again.
4. Check circuit continuity.
5. Connect secondary blasting machine.
6. Attempt to initiate.
7. Repeat step 1.
8. Start 30 minute wait time.
9. Switch to delay mode (by commander's intent fix wire discrepancies).
REFERENCES:
1. TM 013750-13&P Operators Manual MK-7 MOD. 1 Anti-Personnel Obstacle
Breaching System (APOBS)
SUPPORT REQUIREMENTS:
15-46
NAVMC 3500.44
16 Sep 08
ORDNANCE:
DODIC Quantity
MN84 Demolition Kit, APOBS Inert 1
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
PERFORMANCE STEPS:
1. Attempt to initiate 2 additional times.
2. Check the firing device.
3. Attempt to fire again.
4. Check circuit continuity.
5. Start 30 minute wait time.
6. Switch to delay mode (by commander's intent fix wire discrepancies).
REFERENCES:
1. TM 013750-13&P Operators Manual MK-7 MOD. 1 Anti-Personnel Obstacle
Breaching System (APOBS)
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
MN84 Demolition Kit, APOBS Inert 1
RANGE/TRAINING AREA:
Facility Code 17830 Light Demolition Range
15-47
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Determine the type and strength of target materials.
2. Determine the desired detonation effect.
3. Determine the type of hasty charge to create the desired detonation
effect.
4. Determine the type of explosive needed to create the desired detonation
effect.
5. Determine the placement of the charge to create the desired detonation
effect.
6. Determine safety precautions necessary to detonate the charge(s) without
injury to friendly personnel.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
PERFORMANCE STEPS:
1. Analyze the mission using METT-T and OCOKAW.
2. Recommend employment of the various breaching charges depending on the
mission.
3. Provide technical and tactical advice to all levels.
4. Implement appropriate training.
5. Follow demolitions safety considerations.
6. Consider the characteristics/capabilities of the various breaching
charges.
REFERENCES:
1. FM 5-250 Explosives and Demolitions
2. MCRP 3-17A Engineer Field Data (FM 5-34)
3. NAVSEASWO 60-AA-MMA-010 Demolition Materials
15-48
NAVMC 3500.44
16 Sep 08
STANDARD: To ensure the weapon system and all associated equipment are
operational.
PERFORMANCE STEPS:
1. Inspect the weapon system.
2. Inspect the A-bag.
3. Inspect weapon log book.
4. Inspect mission essential optics.
REFERENCES:
1. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
CONDITION: Given an SL-3 complete MK153 SMAW and an MK145 Mod 0 tool-kit/
bore-sight fixture.
PERFORMANCE STEPS:
1. Place plotting board.
2. Secure weapon to tripod.
3. Place optical bore sights.
4. Conduct bore sight.
REFERENCES:
1. TM 08673A-25&P/2A Launcher, Assault Rocket 83MM (SMAW)
15-49
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Analyze the mission using METT-T and OCOKAW.
2. Consider the characteristics/capabilities of the SMAW.
3. Consider techniques of fire.
4. Consider employment in the offense and the defense.
5. Implement appropriate training.
6. Provide technical and tactical advice to all levels.
7. Advise commander on employment of the SMAW.
REFERENCES:
1. MCWP 3-11.2 Marine Rifle Squad
2. TM 08673A-10/1 Launcher, Assault Rocket 83MM (SMAW) MK 153 MOD 0
15-50
NAVMC 3500.44
16 Sep 08
CHAPTER 16
PARAGRAPH PAGE
16-1
NAVMC 3500.44
16 Sep 08
CHAPTER 16
16000. PURPOSE. This chapter details the individual events that pertain to
the community. These events are linked to a service-level Mission Essential
Tasks (MET). This linkage tailor’s individual training for the selected MET.
Each individual event provides an event title, along with the conditions
events will be performed under, and the standard to which the event must be
performed to be successful.
16001. ADMINISTRATIVE NOTES. T&R events are coded for ease of reference.
Each event has a 4-4-4 digit identifier. The first four digits represent the
occupational field or military occupational field (0352). This chapter
contains 0352 infantry anti-tank guided missileman individual training
events. The second four digits represent the functional or duty area. The
last four digits represent the level, and identifier number of the event.
Every individual event has an identifier number from 001 to 999.
Core Capabilities:
1. Carries out the orders of the Anti-tank Squad Leader.
2. Performs the tasks required of a Driver and Assistant Gunner in the
Antitank
(TOW) Section of the anti-armor platoon and have the ability to perform the
duties/tasks required of the Gunner.
3. Performs operator maintenance for and operates a heavy anti-armor weapon
system.
4. Identifies armored vehicles.
16-2
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carries out the orders of the Anti-tank Squad Leader.
2. Performs the tasks required of a gunner in the Anti-armor (TOW) Section
and have the ability to perform the duties/tasks required of the Squad
Leader.
3. Performs operator maintenance for and operates a heavy anti-armor weapon
system.
4. Identifies armored vehicles threat capabilities.
14. Manages operator maintenance for and operates an M1045/46 hardback HMMWV
or its equivalent.
5. Performs fire and movement as an individual and as a member of an
Antitank Squad.
6. Performs all 0300/0352 1000/2000 level tasks.
____________________________________________________________________________
BILLET: Infantry Anti-tank Guided Missileman Squad Leader
Infantry Anti-tank Guided Missileman Squad Leader carries out the orders of
the Anti-tank Guided Missileman Section Leader. He trains his Anti-tank
Squad in the performance of tasks that support platoon training objective.
He maintains the condition, care, and economical use of assigned weapons, and
equipment. His rank is Sergeant. His T/O weapon is the service
rifle/carbine.
Core Capabilities:
1. Carries out the orders of the Anti-tank Guided Missileman Section Leader.
2. Performs the tasks required of a Squad Leader in the Anti-tank (TOW)
Section of the anti-armor platoon and have the ability to perform the
duties/tasks required of the Anti-armor Section Leader.
3. Maintains the discipline, appearance, control, conduct, and welfare of
his Anti-tank Squad.
4. Trains his Anti-tank Squad in the performance of tasks that support
platoon training objectives.
5. Maintains the condition, care, and economical use of assigned weapons and
equipment.
6. Identifies armored vehicles threat capabilities.
7. Calls for and adjusts fire.
8. Writes and issues combat orders.
9. Directs the employment of an anti-armor squad.
10. Performs all 0300/0352 2000 level tasks.
_____________________________________________________________________________
16-3
NAVMC 3500.44
16 Sep 08
Core Capabilities:
1. Carries out the orders of the Javelin Team Leader.
2. Performs the tasks required of an Assistant Gunner in the Javelin section
of the anti-armor platoon.
3. Performs operator maintenance for and operates an M98A1 Javelin.
4. Identifies armored vehicles.
5. Performs all 0300/0352 1000 level tasks.
_____________________________________________________________________________
BILLET: Team Leader/Gunner, Javelin Section, Anti-Armor Platoon
The Javelin Team Leader carries out the orders of the Javelin Section Leader.
He performs the tasks required of a Javelin Team Leader/Gunner in the Javelin
section of the anti-armor platoon. He is trained in armored vehicles
identification. He maintains the condition, care, and economical use of
assigned personnel, weapons, vehicles, and equipment. His rank is a
corporal. His T/O weapon is the service rifle/carbine.
Core Capabilities:
1. Carries out the orders of the Javelin Squad Leader.
2. Performs the tasks required of a Javelin Team Leader/Gunner in the
Javelin section of the anti-armor platoon and have the ability to perform the
duties/tasks required of the Javelin Squad Leader.
4. Identifies armored vehicles threat capabilities.
5. Performs all 0300/0352 1000/2000 level tasks.
_____________________________________________________________________________
BILLET: Squad Leader, Javelin Section, Anti-Armor Platoon
The Javelin Squad Leader carries out the orders of the Javelin Section
Leader. He performs the tasks required of a Javelin Squad Leader in the
Javelin section of the anti-armor platoon. He is trained in armored vehicle
threat capabilities. He maintains the condition, care, and economical use of
assigned personnel, weapons, vehicles and equipment. His rank is a Sergeant.
His T/O weapon is the service rifle/carbine.
Core Capabilities:
1. Carries out the orders of the Javelin Section Leader.
2. Performs the tasks required of a Squad Leader in the Javelin section of
the anti-armor platoon and have the ability to perform the duties/tasks
required of the Anti-armor Section Leader.
3. Maintains the discipline, appearance, control, conduct, and welfare of
his Javelin squad.
4. Trains his Javelin squad in the performance of tasks that support platoon
training objectives.
5. Identifies armored vehicles threat capabilities.
6. Calls for and adjusts fires.
7. Writes and issues combat orders.
8. Controls the fire and movement of his Javelin squad.
9. Performs all 0300/0352 2000 level tasks.
16-4
NAVMC 3500.44
16 Sep 08
16-5
NAVMC 3500.44
16 Sep 08
CONDITION: Given an SL-3 complete M98A1 Javelin CLU, and authorized cleaning
gear.
PERFORMANCE STEPS:
1. Inspect the CLU.
2. Clean the CLU.
3. Perform BIT test.
REFERENCES:
1. TM 09397B-12/1 Operator and Organizational Maintenance Manual for Javelin
PERFORMANCE STEPS:
1. Remove protective interface covers.
2. Inspect encased missile.
3. Attach CLU to encased missile.
4. Turn power switch to day or night on CLU.
5. Remove forward end cap.
6. Adjust CLU sight picture.
REFERENCES:
1. FM 3-22.37 Javelin Medium Anti-armor Weapon System
2. TM 09397B-12/1 Operator and Organizational Maintenance Manual for Javelin
16-6
NAVMC 3500.44
16 Sep 08
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
PL53 Guided Missile, Surface Attack FGM-1 1
RANGE/TRAINING AREA:
Facility Code 17640 Antiarmor Tracking And Live-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Inert missiles can enhance live fire training.
2. Simulation can supplement and enhance training.
CONDITION: Given an M98A1 Javelin command launch unit and an encased missile,
while wearing a fighting load.
PERFORMANCE STEPS:
1. Select a fire position.
2. Determine whether to use a top-down attack or direct fire mode for
engagement.
3. Prepare for firing.
4. Determine engagement criteria.
5. Acquire target.
6. Engage target.
7. Disconnect the launch tube assembly from the CLU, and discard expended
launch tube assembly.
8. Prepare CLU for transport.
REFERENCES:
1. FM 3-22.37 Javelin Medium Anti-armor Weapon System
2. TM 09397B-12/1 Operator and Organizational Maintenance Manual for Javelin
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
PL53 Guided Missile, Surface Attack FGM-1 1
RANGE/TRAINING AREA:
Facility Code 17640 Antiarmor Tracking And Live-Fire Range
16-7
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Inert missiles can enhance live fire training.
2. Simulation can supplement and enhance training.
CONDITION: Given an M98A1 Javelin Command Launch Unit (CLU) with a failure or
malfunction status indicator, while wearing a fighting load.
PERFORMANCE STEPS:
1. Identify and communicate type of malfunction.
2. Perform action for a missile overheat.
3. Perform action for a command launch unit (CLU) built-in test (BIT)
failure.
4. Perform action for a missile failure.
5. Perform action for a hangfire.
6. Perform action for a misfire.
REFERENCES:
1. FM 3-22.37 Javelin Medium Anti-armor Weapon System
2. TM 09397B-12/1 Operator and Organizational Maintenance Manual for Javelin
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
PL53 Guided Missile, Surface Attack FGM-1 1
RANGE/TRAINING AREA:
Facility Code 17640 Antiarmor Tracking And Live-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Inert missiles can enhance live fire training.
2. Simulation can supplement and enhance training.
16-8
NAVMC 3500.44
16 Sep 08
CONDITION: Given a SL-3 complete Javelin Basic Skills Trainer (BST), while
wearing a fighting load.
PERFORMANCE STEPS:
1. Assume a position
2. Prepare the trainer.
3. Engage target in accordance with the mission.
REFERENCES:
1. FM 3-22.37 Javelin Medium Anti-armor Weapon System
2. TM 09397B-12/1 Operator and Organizational Maintenance Manual for Javelin
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. The Javelin gunner must score 8 out of 10 hits on qualification tables
1 through 10 using the basic skills trainer.
PERFORMANCE STEPS:
1. Select site according to mission.
2. Trace outline of fighting position, ensuring the outline of the position
is facing the center of the squad/platoons sector of fire.
3. Check fields of fire.
4. Prepare the Javelin.
5. Clear fields of fire, both overhead and ground.
6. Dig the primary (left side) Javelin seated firing platform. This should
be about one Kevlar helmet deep, one and a half M16A4s wide, and one M16A4
long. All dirt removed should be used to build the parapets to the front
and flank of the position.
7. Dig the standing area wider than the standard two-man fighting position
making room for the Javelin round and the gunners’ equipment.
16-9
NAVMC 3500.44
16 Sep 08
RELATED EVENTS:
0300-DEF-1001 0331-EMPL-1001
REFERENCES:
1. FM 3-22.37 Javelin Medium Anti-armor Weapon System
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17410 Maneuver/Training Area, Light Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Training area where digging is permitted.
2. The overall area needed for constructing a Javelin fighting position is
about 3 feet (front to rear) by 5 feet (side to side) as depicted in Figure
4-12 on page 4-13 of the reference. This includes space require to
construct the front, sides, and back parapets. The depth of the fighting
position depends on the height of the shortest Marine occupying the
position. The standing area should be about two M16A4s wide (from side-to-
side) and about one and a half M16A4 rifles long (from front to rear).
PERFORMANCE STEPS:
1. Identify and communicate type of malfunction.
2. Perform remedial action for night vision sight not cool warning indicator.
3. Perform remedial action for flashing field of view indicator.
4. Perform remedial action for command launch unit battery low warning
indicator.
5. Perform remedial action for BCU low warning indicator.
6. Perform remedial action for flashing missile not ready indicator.
7. Perform remedial action for missile overheat malfunction.
8. Perform remedial action for missile BIT malfunction.
16-10
NAVMC 3500.44
16 Sep 08
9. Perform remedial action for command launch unit BIT failure warning
indicator.
10. Perform remedial action for hang fire.
11. Perform remedial action for misfire.
12. Attempt to fire the missile.
REFERENCES:
1. FM 3-22.37 Javelin Medium Anti-armor Weapon System
2. TM 09397B-12/1 Operator and Organizational Maintenance Manual for Javelin
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
PL53 Guided Missile, Surface Attack FGM-1 1
RANGE/TRAINING AREA:
Facility Code 17640 Antiarmor Tracking And Live-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Inert missiles can enhance live fire training.
2. Simulation can supplement and enhance training.
PERFORMANCE STEPS:
1. Clean weapon system.
2. Inspect weapon system.
3. Assemble weapon system.
4. Execute system self-test procedures.
5. Conduct system checkout procedures.
6. Disassemble weapon system.
REFERENCES:
1. TM 9-1425-472-12 TOW 2 Weapon System Guided Missile System M220E4
2. TM 9-1425-923-12 Saber System (Improved Target Acquisition System) M41A
16-11
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Prepare the weapon system.
2. Identify the proper TOW missile variant for the desired target to be
engaged.
3. Prepare the encased missile.
4. Load the encased missile ground mounted.
5. Load the encased missile vehicle mounted.
REFERENCES:
1. FM 3-22.34 TOW Weapon System
2. TM 9-1425-450-12 TOW Weapon System Guided Missile System
3. TM 9-1425-923-12 Saber System (Improved Target Acquisition System) M41A
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
PB97 Guided Missile, Surface Attack BGM-7 1
RANGE/TRAINING AREA:
Facility Code 17640 Antiarmor Tracking And Live-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Inert missiles can enhance live fire training.
2. Simulation can supplement and enhance training.
16-12
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Prepare the weapons system.
2. Identify the proper TOW missile variant for the desired target to be
engaged.
3. Acquire the target.
4. Engage the target.
5. Unload weapon system.
REFERENCES:
1. FM 3-22.34 TOW Weapon System
2. MCWP 3-15.5 Anti-armor Operations
3. TM 9-1425-450-12 TOW Weapon System Guided Missile System
4. TM 9-1425-923-12 Saber System (Improved Target Acquisition System) M41A
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
PB97 Guided Missile, Surface Attack BGM-7 1
RANGE/TRAINING AREA:
Facility Code 17640 Antiarmor Tracking And Live-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Inert missiles can enhance live fire training.
2. Simulation can supplement and enhance training.
PERFORMANCE STEPS:
1. Prepare the weapon system.
16-13
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 3-22.34 TOW Weapon System
2. TM 9-1425-450-12 TOW Weapon System Guided Missile System
3. TM 9-1425-923-12 Saber System (Improved Target Acquisition System) M41A
PERFORMANCE STEPS:
1. Inspect the weapon system.
2. Emplace the vehicle in the selected position.
3. Attach the traversing unit to the pedestal mount.
4. Attach the traversing unit with pedestal mount to the adaptor on the
tactical vehicle.
5. Attach the launch tube to the Traversing Unit.
6. Emplace and connect the Missile Guidance Set (MGS).
7. Attach the Day Sight Tracker to the Traversing Unit.
8. Attach the Thermal Night Sight to the Day Sight Tracker.
9. Install the TOW vehicle power conditioner into the Missile Guidance Set.
10. Connect the vehicle power conditioner.
11. Boresight the TOW system.
12. Conduct system check-out procedures (CCHANT).
REFERENCES:
1. FM 3-22.34 TOW Weapons System
2. TM 9-1425-472-12 TOW 2 Weapon System Guided Missile System M220E4
3. TM 9-1425-923-12 Saber System (Improved Target Acquisition System) M41A
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
PB97 Guided Missile, Surface Attack BGM-7 1
MISCELLANEOUS:
16-14
NAVMC 3500.44
16 Sep 08
ADMINISTRATIVE INSTRUCTIONS:
1. Inert missiles can enhance training.
2. Simulation can supplement and enhance training.
PERFORMANCE STEPS:
1. Ensure the optical sight has had the TOSH (TOW Optical Sight Hardening)
modification upgrade.
2. Ensure the thermal sight's On/Off/Standby Switch is set to "ON" and that
the sight is at an operational temperature.
3. Ensure the Boresight Collimator and Collimator Cable are mated to the face
of the thermal sight.
4. Ensure the thermal sight field-of-view switch is set to "Narrow/"
5. Ensure the optical sight reticle light switch is turned "ON."
6. Ensure the bridge clamp arming lever is down and locked.
7. Ensure the diopter focus ring (optical sight) is set to +3.
8. Ensure the diopter adjustment ring (thermal sight) is set to zero (0).
9. Ensure the thermal sight course azimuth knob is set to "1" or "2" but not
in between.
10. Lift the test operate switch cover and engage the test operate switch.
11. Ensure all lights on the MGS indicator display stay lit for at least three
seconds.
12. Ensure the following lights show "pass" criteria: BATT PASS, MGS PASS, PA
PASS, and OSS PASS.
13. Unlock and manipulate the optical sight azimuth and elevation control
knobs in order to center each green dot in the middle of the azimuth and
elevation cross on the MGS indicator display.
14. Ensure each "center green dot" remains in place for at least three
seconds.
15. Conduct a balance and steering check in order to confirm that the azimuth
and elevation cross tracks steerage commands.
16. Release the test operate switch and close the switch cover.
17. Adjust the diopter focus ring (optical sight) in order to ensure the
optical sight crosshairs are sharp and crystal clear.
18. Manipulate the Boresight Collimator Azimuth and Elevation Control Knobs in
order to ensure the optical sight cross hairs are centered inside the
collimator's aiming circle.
19. Unlock and manipulate the thermal sight azimuth and elevation control
knobs in order to ensure the thermal sight cross hairs are centered inside
16-15
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. MI-07722B-50/24 Modification of TOW 2 Launcher
2. TM 9-1425-450-12 TOW Weapon System Guided Missile System
3. TM 9-1425-472-12 TOW 2 Weapon System Guided Missile System M220E4
4. TM 9-1425-923-12 Saber System (Improved Target Acquisition System) M41A
PERFORMANCE STEPS:
1. Ensure the thermal sight's On/Off/Standby switch is set to "On."
2. Raise the bridge clamp.
3. Insert the AN/TSM-158 ECRT tube into the launch tube.
4. Close the bridge clamp.
5. Cycle the missile select switch through all eight positions (1-8) in order
to ensure the switch stops as all settings.
6. Ensure the PRE-FIRE, FIRE, and WIRE CUT circuit breakers seat firmly in
both the "On" and "Off" positions.
7. Ensure the missile select switch is set to "1."
8. Ensure the PRE-FIRE, FIRE, and WIRE CUT circuit breakers are each set to
"On."
9. Raise the arming lever on the bridge clamp.
10. Raise the trigger protective cover.
11. Press the trigger and hold for three seconds.
12. Ensure the PRE-FIRE circuit breaker immediately tripped from "On" to
"Off."
13. Ensure the FIRE circuit breaker tripped from "On" to "Off" within 1.5
seconds from the time the trigger was depressed.
14. Open the bridge clamp.
15. Ensure the WIRE CUT circuit breaker tripped from "On" to "Off" as soon as
the bridge clamp was open.
16-16
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. TM 9-1425-472-12 TOW 2 Weapon System Guided Missile System M220E4
2. TM 9-1425-923-12 Saber System (Improved Target Acquisition System) M41A
3. TM 9-4935-455-14 Operator's, Organizational, Direct Support and General
Support Maintenance Manual for Electrical Circuit Test Set, AN/TSM-158
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Ensure the Marines are informed that this piece of gear is the only way
to ensure that a properly assembled TOW system will actually fire a
missile.
2. Ensure the Marines are informed that neither a System Check-Out
Procedure nor a Systems Self-Test confirm the PRE-FIRE, FIRE, and WIRE CUT
signals needed to commence and end a missile track.
3. The ECRT required for this task is the ELECTRICAL CIRCUIT TEST SET
AN/TSM-158 (NSN 4935-01-119-3460).
PERFORMANCE STEPS:
1. Determine malfunction type.
2. Communicate malfunction.
3. Perform misfire procedures.
4. Perform hang fire procedures.
5. Perform post-launch PA fail procedures.
6. Perform erratic missile procedures.
7. Perform dud missile procedures.
REFERENCES:
1. FM 3-22.34 TOW Weapon System
2. TM 9-1425-472-12 TOW 2 Weapon System Guided Missile System M220E4
3. TM 9-1425-923-12 Saber System (Improved Target Acquisition System) M41A
SUPPORT REQUIREMENTS:
16-17
NAVMC 3500.44
16 Sep 08
ORDNANCE:
DODIC Quantity
PB97 Guided Missile, Surface Attack BGM-7 1
RANGE/TRAINING AREA:
Facility Code 17640 Antiarmor Tracking And Live-Fire Range
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Inert missiles can enhance live fire training.
2. Simulation can supplement and enhance training.
PERFORMANCE STEPS:
1. Select site.
2. Outline the position.
3. Check fields of fire.
4. Dig the position using excavated dirt to build the front and flanks.
5. Camouflage the position.
6. Prepare an alternate position.
7. Boresight the TOW system.
8. Conduct system check-out procedures (CCHANT).
9. Continue to improve the position.
10. Sanitize the area before departing.
REFERENCES:
1. FM 3-22.34 TOW Weapons System
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
16-18
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Illustrate weapons position with proper weapon symbol and a six-digit
grid.
2. Illustrate a known point and label back azimuth and distance from the
known point to the weapon position.
3. Illustrate left and right lateral limits and label azimuth.
4. Illustrate minimum and maximum engagement lines and label distance.
5. Illustrate anticipated target engagement area, and label it as ATEA.
6. Illustrate target reference points and label azimuth and distance.
7. Illustrate dead space.
8. Illustrate magnetic north.
9. Label marginal data with unit, type of position, date, and time.
REFERENCES:
1. FM 3-21.91 Tactical Employment of Anti-armor Platoons, Companies and
Battalions
2. FM 3-22.37 Javelin Medium Anti-armor Weapon System
3. MCRP 5-12A Operational Terms and Graphics
4. MCWP 3-15.5 Anti-armor Operations
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
PERFORMANCE STEPS:
1. Determine tank or non-tank. (Note: If tank, follow steps 2, 3, 4, 6, and
8. If non-tank, follow steps 5, 6, 7, and 8.)
2. Determine absence or presence of a cupola.
3. Determine the type turret.
4. Determine absence or presence, type, and location of bore evacuator.
16-19
NAVMC 3500.44
16 Sep 08
REFERENCES:
1. FM 100-2-3 The Soviet Army
2. Jane's Book Of Armored Vehicles (Current Year)
SUPPORT REQUIREMENTS:
EQUIPMENT:
1. ROC-V
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Simulation can supplement and enhance training.
16-20
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Determine engagement criteria.
2. Determine type of weapon best suited for engagement (HAW-MAW-LAW).
3. Consider massed surprise fires.
REFERENCES:
1. FM 3-21.91 Tactical Employment of Anti-armor Platoons, Companies and
Battalions
2. FM 3-22.34 TOW Weapon System
3. TM 9-1425-450-12 TOW Weapon System Guided Missile System
4. TM 9-1425-923-12 Saber System (Improved Target Acquisition System) M41A
SUPPORT REQUIREMENTS:
ORDNANCE:
DODIC Quantity
PB97 Guided Missile, Surface Attack BGM-7 1
RANGE/TRAINING AREA:
Facility Code 17640 Antiarmor Tracking And Live-Fire Range
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Simulation can supplement and enhance training.
16-21
NAVMC 3500.44
16 Sep 08
PERFORMANCE STEPS:
1. Analyze the mission using METT-T and OCOKAW.
2. Consider the characteristics/capabilities of the anti-armor weapons.
3. Consider techniques of fire.
4. Consider employment of anti-armor weapon systems in the offense and the
defense.
5. Provide technical and tactical advice to all levels.
REFERENCES:
1. FM 3-21.91 Tactical Employment of Anti-armor Platoons, Companies and
Battalions
2. FM 3-22.34 TOW Weapon System
3. MCWP 3-15.5 Anti-armor Operations
4. TM 09397B-12/1 Operator and Organizational Maintenance Manual for Javelin
5. TM 9-1425-923-12 Saber System (Improved Target Acquisition System) M41A
SUPPORT REQUIREMENTS:
RANGE/TRAINING AREA:
Facility Code 17640 Antiarmor Tracking And Live-Fire Range
Facility Code 17411 Maneuver/Training Area, Amphibious Forces
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Simulation can supplement and enhance training.
PERFORMANCE STEPS:
1. Identify by NATO designator.
2. Identify armament.
3. Identify capabilities.
4. Identify limitations.
REFERENCES:
1. FM 100-2-3 The Soviet Army
2. MCWP 3-15.5 Anti-armor Operations
3. Jane's Book Of Armored Vehicles (Current Year)
SUPPORT REQUIREMENTS:
EQUIPMENT:
1. ROC-V
16-22
NAVMC 3500.44
16 Sep 08
MISCELLANEOUS:
ADMINISTRATIVE INSTRUCTIONS:
1. Simulation can supplement and enhance training.
CONDITION: Given an anti-armor unit and tactical vehicles with all associated
equipment.
PERFORMANCE STEPS:
1. Observe the conduct of PMCS of tactical vehicles.
2. Account for all SL3 components.
3. Inspect vehicle log books.
4. Inspect vehicle 1st Echelon maintenance.
5. Coordinate required higher echelon maintenance.
REFERENCES:
1. TM 2320-10/6A Truck Utility 1/4 Ton 4X4
2. TM 92320-280-10 Technical Manuals for Highly Mobile Multi-Wheeled Vehicle
(HMMWV)
16-23
NAVMC 3500.44
16 Sep 08
APPENDIX A
A-1
NAVMC 3500.44
16 Sep 08
standard and condition will be different because the scope of the collective
event is broader.
Combat Readiness Cycle. The combat readiness cycle depicts the relationships
within the building block approach to training. The combat readiness cycle
progresses from T&R Manual individual core skills training, to the
accomplishment of collective training events, and finally, to a unit’s
participation in a contingency or actual combat. The combat readiness cycle
demonstrates the relationship of core capabilities to unit combat readiness.
Individual core skills training and the training of collective events lead to
unit proficiency and the ability to accomplish the unit’s stated mission.
Core Capabilities. Core capabilities are the essential functions a unit must
be capable of performing during extended contingency/combat operations. Core
unit capabilities are based upon mission essential tasks derived from
operational plans; doctrine and established tactics; techniques and
procedures.
A-2
NAVMC 3500.44
16 Sep 08
Core Plus Skills. Core plus skills are those advanced skills that are
environment, mission, rank, or billet specific. 2000-level training is
designed to make Marines proficient in core skills in a specific billet or at
a specified rank at the Combat Ready level. 3000-8000-level training
produces combat leaders and fully qualified section members at the Combat
Qualified level. Marines trained at the Combat Qualified level are those the
commanding officer feels are capable of accomplishing unit-level missions and
of directing the actions of subordinates. Many core plus tasks are learned
via MOJT, while others form the base for curriculum in career level MOS
courses taught by the formal school.
Core Skills. Core skills are those essential basic skills that “make” a
Marine and qualify that Marine for an MOS. They are the 1000-level skills
introduced in entry-level training at formal schools and refined in
operational units.
Deferred Event. A T&R event that a commanding officer may postpone when in
his or her judgment, a lack of logistic support, ammo, ranges, or other
training assets requires a temporary exemption. CRP cannot be accrued for
deferred “E-Coded” events.
A-3
NAVMC 3500.44
16 Sep 08
Event Component. The major procedures (i.e., actions) that must occur to
perform a Collective Event to standard.
A-4
NAVMC 3500.44
16 Sep 08
Marine Corps Ground Training and Readiness (T&R) Program. The T&R Program is
the Marine Corps’ primary tool for planning and conducting training, for
planning and conducting training evaluation, and for assessing training
readiness. The program will provide the commander with standardized programs
of instruction for units within the ground combat, combat support, and combat
service support communities. It consolidates the ITS, CTS, METL and other
individual and unit training management tools. T&R is a program of standards
that systematizes commonly accepted skills, is open to innovative change, and
above all, tailors the training effort to the unit’s mission. Further, T&R
serves as a training guide and provides commanders an immediate assessment of
unit combat readiness by assigning a CRP to key training events. In short,
the T&R Program is a building block approach to training that maximizes
flexibility and produces the best-trained Marines possible.
A-5
NAVMC 3500.44
16 Sep 08
Section Skill Tasks. Section skills are those competencies directly related
to unit functioning. They are group rather than individual in nature, and
require participation by a section (S-1, S-2, S-3, etc).
A-6
NAVMC 3500.44
16 Sep 08
Technical Exercise Controller (TEC). The TEC is appointed by the ED, and
usually comes from his staff or a subordinate command. The TEC is the senior
evaluator within the TECG and should be of equal or higher grade than the
commander(s) of the unit(s) being evaluated. The TEC is responsible for
ensuring that the evaluation is conducted following the instructions
contained in this order and MCO 1553.3A. Specific T&R manuals are used as
the source for evaluation criteria.
Training Plan. Training document that outlines the general plan for the
conduct of individual and collective training in an organization for
specified periods of time.
Unit CRP. Unit CRP is a percentage of the E-coded collective events that
support the unit METL accomplished by the unit. Unit CRP is the average of
all MET CRP.
Unit Evaluation. All units in the Marine Corps must be evaluated, either
formally or informally, to ensure they are capable of conducting their combat
mission. Informal evaluations should take place during all training events.
The timing of formal evaluations is critical and should, when appropriate, be
directly related to the units’ operational deployment cycle. Formal
evaluations should take place after the unit has been staffed with the
majority of its personnel, has had sufficient time to train to individual and
collective standards, and early enough in the training cycle so there is
sufficient time to correctly identified weaknesses prior to deployment. All
combat units and units’ task organized for combat require formal evaluations
prior to operational deployments.
Unit Training Management (UTM). Unit training management is the use of the
SAT and Marine Corps training principles in a manner that maximizes training
A-7
NAVMC 3500.44
16 Sep 08
results and focuses the training priorities of the unit on its wartime
mission. UTM governs the major peacetime training activity of the Marine
Corps and applies to all echelons of the Total Force.
A-8
NAVMC 3500.44
16 Sep 08
APPENDIX B
REFERENCES
2-0 Intelligence
3-0 Operations
3-05.137 Army Special Operations Forces Foreign Internal Defense
3-05.222 U.S. Army Special Forces Sniper Training and Employment
3-05.40 Civil Affairs Operations
3-07 Stability Operations and Support Operations
3-11.4 Multiservice tactics, techniques, and procedures for nuclear,
biological, and chemical (NBC) protection
3-13 Information Operations: Doctrine, Tactics, Techniques, and
Procedures
3-20.98 Reconnaissance Platoon
3-21.91 Tactical Employment of Antiarmor Platoons, Companies and
Battalions
3-22.27 MK19 40MM Grenade Machine Gun MOD 3
3-22.31 40-mm Grenade Launcher, M203
3-22.34 TOW Weapon System
3-22.37 Javelin Medium Anti-armor Weapon System
3-22.65 Browning Machine Gun, M2
3-22.68 Light and Medium machineguns
3-23.25 Light Anti-Armor Weapons
3-23.30 Grenades and Pyrotechnic Signals
3-25.26 Map Reading and Land Navigation
3-52.2 Multi-Service Tactics, Techniques, and Procedures for the Theater
Air Ground System (TAGS)
3-63.1 Detainee Operations in the Global War on Terrorism
5-102 Countermobility
5-170 Engineer Reconnaissance
5-20 Camouflage
5-250 Explosives and Demolitions
6-20-40 FIRE SUPPORT FOR BRIGADE OPERATIONS (HEAVY)
6-20-50 Fire Support for Brigade Operations (Light)
6-30 Tactics, Techniques, and Procedures for Observed Fire
7-10 Infantry Rifle Company
7-90 Tactical Employment of Mortars
17-95 Cavalry
17-97 Regimental Armored Cavalry Troop
17-98 Scout Platoon
20-3 Camouflage, Concealment, and Decoys
20-32 Mine/Countermine Operations
B-1
NAVMC 3500.44
16 Sep 08
1-3B Sniping
2-7 Fire Support in MAGTF Operations
5-4A Close Air Support and Close-in Fire Support
6-3 Marine Infantry Battalion
6-4 Marine Rifle Company/Platoon
6-18.1 Tactics, Techniques, and Procedures for the Marine Corps Fire
Support System
6-30 Employment of the Light Armored Infantry Battalion
B-2
NAVMC 3500.44
16 Sep 08
1500.42A Management for Marine Corps Formal Schools and Training Centers
1553.1B The Marine Corps Training and Education System (May 91)
1553.3A Unit Training Management (UTM) (Jan 04)
3120.8A Organization of FMF for Combat
3120.9 Policy for Marine Expeditionary Unit
3500.27B Operational Risk Management (ORM) (May 04)
3570.1B Range Safety (Jun 03)
3574.2k Marine Corps Combat Marksmanship Program
3591.2J Small Arms Marksmanship Competition
4630.6 Military Airlift Command Requirement
8010.1 Class V(W) SUP FMF CBT OP
P1500.40_ Marine Corps Training Philosophy and Requirements
P4400.150E Consumer-Level Supply Policy Manual (Jun 99)
P4450.12 Storage and Handling of Hazardous Materials
P4600.7_ USMC Transportation Manual
P4790.2_ MIMMS Field Procedures Manual
P5090.2A Environmental Compliance and Protection Manual (Jul 98)
P8020.10A Marine Corps Ammunition Management and Explosives Safety Policy
B-3
NAVMC 3500.44
16 Sep 08
B-4
NAVMC 3500.44
16 Sep 08
B-5
NAVMC 3500.44
16 Sep 08
NAVMCs
B-6
NAVMC 3500.44
16 Sep 08
B-7
NAVMC 3500.44
16 Sep 08
Miscellaneous
B-8
NAVMC 3500.44
16 Sep 08
BUST Handbook
USAJFKSWCS Civil Military Operations Center (CMOC) Handbook dtd Feb
2002
X-Files 3-35.3X Combat Hunter TTPs
TTECG/MAWTS-1 Convoy Battle Skills Handbook
M.E.D.I.C. (CD- Defense Intelligence Agency, Armed Forces Medical
ROM) Intelligence Center: Medical Environmental Disease
Intelligence and Countermeasures (M.E.D.I.C.) (CD-ROM),
current version.
DOD 4500.9-R Defense Transportation Regulation Parts I, II & III
DA PAM 385-63 Department of the Army Range Safety
DCOCSOP Digital COC SOP for Battalion Operations in Irregular
Warfare
USAID Field Operations Guide, dtd 2005
F-RAIG CD-ROM Field Return Ammunition Inspection Guide
USIP Guidelines for Relations between U.S. Armed Forces and
Non-Governmental Humanitarian Organizations in Hostile or
Potentially Hostile Environments
IP 2-31 Infantry Mortars
DOD Directive Information Operations
3600.1
DoD IO Roadmap
Jane's Book Of Armored Vehicles (Current Year)
EPBST Ver 1.3 Javelin Gunners Skill Test
JACS Joint Automated CEOI System
JIEDDTF 05-23 Joint Improvised Explosive Device Defeat Organization
Tactics, Techniques and Procedures Handbook
SL-3-08521A Machine Gun, 40mm, MK-19, Mod 3
SL-3-02498B Machine Gun, Caliber .50, Browning, M2
NSPD-44 Management of Interagency Efforts Concerning
Reconstruction and Stabilization
MCSFTCO BSG WPNS Marine Corps Security Force Training Company Basic
DRILL GUIDE Security Guard Course Weapons Drill Guide
MI-07722B-50/24 Modification of TOW 2 Launcher
MCBul 3501 MPF Marine Expeditionary Brigade (MEB) Force List
N/A 2 Naval Gunfire and Supporting Arms Planning Reference
Handbook
NATICK PAM 30-25 Operational Rations
OPERATOR'S MANUAL FOR 40MM MULTI-SHOT GRENADE LAUNCHER M32
TO 31R2-2 PRC- Operator's Manual, AN/PRC-113
113-1-
SPHERE Project Humanitarian Charter and Minimum Standards in
Disaster Response Handbook, dtd 2004
SH 21-76 Ranger Handbook
U.S. State Dept S/CRS Planning Guide for the Interagency Management
System, dtd Dec 2005
Scope / Optics Owner's Manual
TC 31-73 Special Forces Advisor Guide
B-9
NAVMC 3500.44
16 Sep 08
B-10
NAVMC 3500.44
16 Sep 08
APPENDIX C
C-1
NAVMC 3500.44
16 Sep 08
C-2
NAVMC 3500.44
16 Sep 08
APPENDIX D
SIMULATION
D-1
NAVMC 3500.44
16 Sep 08
D-2