Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 105 views

    ZT-180 Install Instructions

    Uploaded by

    plfmendes
    This document provides instructions for burning ZT-N180 software: 1. Open the ANYKA burning tools software called "burntool_v07.2.exe" and select the appropriate software type and version to burn. 2. Connect the device to the computer using USB and power. Click "Start" to begin automatically updating and burning the software. 3. When the progress bar reaches 100% and burning is reported as successful, the software burning process is complete and the USB can be disconnected.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd

    ZT-180 Install Instructions

    Uploaded by

    plfmendes
    105 views8 pages
    This document provides instructions for burning ZT-N180 software: 1. Open the ANYKA burning tools software called "burntool_v07.2.exe" and select the appropriate software type and version to burn. 2. Connect the device to the computer using USB and power. Click "Start" to begin automatically updating and burning the software. 3. When the progress bar reaches 100% and burning is reported as successful, the software burning process is complete and the USB can be disconnected.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for burning ZT-N180 software: 1. Open the ANYKA burning tools software called "burntool_v07.2.exe" and select the appropriate software type and version to burn. 2. Connect the device to the computer using USB and power. Click "Start" to begin automatically updating and burning the software. 3. When the progress bar reaches 100% and burning is reported as successful, the software burning process is complete and the USB can be disconnected.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    105 views8 pages

    ZT-180 Install Instructions

    Uploaded by

    plfmendes
    This document provides instructions for burning ZT-N180 software: 1. Open the ANYKA burning tools software called "burntool_v07.2.exe" and select the appropriate software type and version to burn. 2. Connect the device to the computer using USB and power. Click "Start" to begin automatically updating and burning the software. 3. When the progress bar reaches 100% and burning is reported as successful, the software burning process is complete and the USB can be disconnected.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 8

    ZT-N180 软件烧录方法

    The burn way for ZT-N180 software


    1. 打开 ANYKA 烧录工具软件.\ 双击“burntool_v07.2.exe”
    1,Open ANYKA, the burning tools software \double
    click“burntool_v07.2.exe”

    双击 burntool_v07.2.exe
    Double click burntool_v07.2.exe

    2. 按照视图选择点击设置程序。
    2,click “setting”according to the view
    点击设置程序
    Click setting

    3. 请按视图选择对应程序，然后点击保存。
    3,Pls choose the procedure according to the view,then
    click save
    烧录 android 软件，设置程序如下图
    Burning the android software,the setting procedure
    is as follows
    请按照红线框内对应选择，然后
    保存。Pls choose according to the
    red frame,then save.

    烧录 WINCE 软件，设置程序如下图
    Burning WINCE software, the setting procedure is
    as follows
    请按照红线框内对应选
    择，然后保存。Pls choose
    according to the red
    frame,then save.

    4. 开始烧录软件。
    Start burning software
    连电脑的一端 connect with computer

    连上 USB 和电源线按此 MEUN 键，再开机。


    Connect USB and power line,click MEUN
    button,then turn on the power

    开机键。Power on button

    5．当第一次使用时。会提示按装驱动，按以下图选择。
    When using for the first time, installation process
    will be suggested,make choise as below.
    请按图选择再下一
    步。Pls choose according
    to the picture,then click
    the “next “button

    按图选择。请按下一步
    Pls choose according to the
    picture,then click the “next
    “button
    选择仍然继续。
    Choose still carry on

    直 接按 完成就可以了
    Choose finished

    5. 板子连上后 Device10 会变绿色。


    Device 10 will turn green after the connection
    当 Device10
    变绿时，即
    检测到 USB
    了，请单击
    Start, 进行自
    动 升
    级 ,when
    Device 10
    turn
    green,then
    the USB is
    detected.Pls
    click “start”
    for auto
    update.
    当进度条到 100% 并显示出厂烧录成功，升级
    已完成了，将 USB 拔掉就 OK 了
    When progress bar reaches 100% and shows
    leaving factory burning successfully,then update
    is finished. pull up USB.

    You might also like