Sony kv28ls35 kv32ls35 Chassis Fe-2 (ET)

SERVICE MANUAL FE-2 CHASSIS
MODEL COMMANDER DEST CHASSIS NO. MODEL COMMANDER DEST CHASSIS NO.
KV-28LS35B RM-932 FR SCC-Q54L-A KV-32LS35B RM-932 FR SCC-Q54K-A
KV-28LS35E RM-932 ESP SCC-Q53M-A KV-32LS35E RM-932 ESP SCC-Q53L-A
KV-28LS35U RM-932 UK SCC-Q52H-A KV-32LS35U RM-932 UK SCC-Q52G-A
1
TABLE OF CONTENTS
Section Title Page Section Title Page
Specifications .................... 3 4. CIRCUIT ADJUSTMENTS

Connectors .................... 5
Self Diagnostic Software .................... 6 4-1. Electrical Adjustments .................... 19
4-2. Test Mode 1 .................... 21
1. GENERAL 4-3. Test Mode 2 .................... 21
Switching On the TV and
Automatically Tuning .................... 7 5. DIAGRAMS
Introducing the Menu System .................... 8
Menu Guide .................... 8 5-1. Block Diagrams (1) .................... 23
Teletext .................... 9 Block Diagrams (2) .................... 25
Connecting Optional Equipment.................... 10 5-2. Circuit Board Location .................... 26
Using Optional Equipment .................... 10 5-3. Schematic Diagrams and
Specifications .................... 11 Printed Wiring Boards .................... 26
Troubleshooting .................... 11 * C Board .................... 27
* VM Board .................... 29
2. DISASSEMBLY * H2 Board .................... 32
* F2 Board .................... 33
2-1. Rear Cover Removal .................... 12 * D2 Board .................... 34
2-2. Speaker Disconnection .................... 12 * D3 Board .................... 35
2-3. Chassis Removal .................... 12 * F3 Board .................... 36
2-4. A Board PWB Removal 1 .................... 13 * A Board .................... 39
2-5. A Board PWB Removal 2 .................... 13 5-4. Semiconductors .................... 45
2-6. Service Position .................... 13 5-5. IC Blocks .................... 47
2-7. Side Control Module Removal .................... 13
2-8. Picture Tube Removal .................... 14 6. EXPLODED VIEWS
3. SET-UP ADJUSTMENTS 6-1. Chassis .................... 48

6-2. Picture Tube .................... 49
3-1. Beam Landing .................... 15
3-2. Convergence .................... 16 7. ELECTRICAL PARTS LIST .................... 50
3-3. Focus Adjustment .................... 18
3-4. Screen (G2), White Balance .................... 18
CAUTION ATTENTION
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND THE APRES AVOIR DECONNECTE LE CAP DE’LANODE,
ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR THE COURT-CIRCUITER L’ANODE DU TUBE CATHODIQUE ET
CARBON PAINTED ON THE CRT, AFTER REMOVAL OF THE CELUI DE L’ANODE DU CAP AU CHASSIS METALLIQUE DE
ANODE CAP. L’APPAREIL, OU AU COUCHE DE CARBONE PEINTE SUR LE
TUBE CATHODIQUE OU AU BLINDAGE DU TUBE
CATHODIQUE.
WARNING !!
AN ISOLATION TRANSFORMER SHOULD BE USED DURING ATTENTION !!

ANY SERVICE WORK TO AVOID POSSIBLE SHOCK HAZARD
DUE TO LIVE CHASSIS, THE CHASSIS OF THIS RECEIVER IS AFIN D’EVITER TOUT RISQUE D’ELECTROCUTION
DIRECTLY CONNECTED TO THE POWER LINE. PROVENANT D’UN CHÁSSIS SOUS TENTION, UN
TRANSFORMATEUR D’ISOLEMENT DOIT ETRE UTILISÈ LORS
DE TOUT DÈPANNAGE LE CHÁSSIS DE CE RÈCEPTEUR EST
SAFETY-RELATED COMPONENT WARNING !! DIRECTMENT RACCORDÈ Á L’ALIMENTATION SECTEUR.
COMPONENTS IDENTIFIED BY SHADING AND MARKED £ ON

THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THE ATTENTION AUX COMPOSANTS RELATIFS Á
PARTS LIST ARE CRITICAL FOR SAFE OPERATION. REPLACE LA SECURITÈ!!
THESE COMPONENTS WITH SONY PARTS WHOSE PART
NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN LES COMPOSANTS IDENTIFIÈS PAR UNE TRAME ET PAR UNE
SUPPLEMENTS PUBLISHED BY SONY. MARQUE £ SUR LES SCHÈMAS DE PRINCIPE, LES VUES
EXPLOSÈES ET LES LISTES DE PIECES SONT D’UNE IMPOR-
TANCE CRITIQUE POUR LA SÈCURITÈ DU FONCTIONNEMENT,
NE LES REMPLACER QUE PAR DES COMPSANTS SONY DONT
LE NUMÈRO DE PIÈCE EST INDIQUÈ DANS LE PRÈSENT
MANUEL OU DANS DES SUPPLÈMENTS PUBLIÈS PAR SONY.
2
ITEM MODEL Television System Stereo System Channel Coverage Color System
VHF : E2-E12, F2-F10
PAL, SECAM
GERMAN/NICAM UHF : E21-E69, F21-F69, B21-B69
B B/G/H, D/K, I, L NTSC4.43, NTSC3.58
Stereo CABLE TV : S01-S03, S1-S20, B-Q
(VIDEO IN)
HYPER : S21-S41
VHF : E2-E12
PAL, SECAM
GERMAN/NICAM UHF : E21-E69
E B/G/H, D/K NTSC4.43, NTSC3.58
Stereo CABLE TV : S01-S03, S1-S20
(VIDEO IN)
HYPER : S21-S41
PAL, SECAM
U I NICAM Stereo I UHF : E21-E69 NTSC4.43, NTSC3.58
(VIDEO IN)
Flat Display FD Trinitron

Approx 71 cm (28 inches) Sound output
(Approx 66 cm picture measured
Picture Tube diagonally) KV-28LS35 Right and Left speaker 2x14W (Music Power) 2x7W (RMS)
Approx 82 cm (32 inches)
(Approx 76 cm picture measured Sub Woofer 1x20W (Music Power) 1x10W (RMS)
diagonally) KV-32LS35
Input/Output Terminals [REAR] General Specifications
Inputs for Audio and Video signals. Power Requirements 220 - 240V
1: 21-pin Euro connector Inputs for RGB.
(CENELEC standard) Outputs of TV Video and Audio 90 W (KV-28LS35)
Power Consumption
signals. 88 W (KV-32LS35)
Inputs for Audio and Video signals. Approx 806x497x540mm (KV-28LS35)
Dimensions
2: 21-pin Euro connector Inputs for S Video. Approx 891x564x584mm (KV-32LS35)
Outputs of TV Video and Audio signals. Approx 43kg (KV-28LS35)
(selectable) Weight
Approx 60.5kg (KV-32LS35)
RM-932 Remote Commander (1)

Phono Jacks Output Connectors variable for Audio Supplied Accessories
IEC designated R6 battery (2)
Signals
TV system Autodetection, Teletext
Input/Output Terminals [SIDE] Other Features
Vir tual Dolby
Headphone jack stereo mini jack Remote Control System : Infrared Control
Audio inputs phono jacks 3V dc
Video inputs phono jacks Power requirements 2 batteries IEC designation
S Video input 4 pin DIN R6 (size AA)
Design and specifications are subject to change without notice.
3
Model Name
KV-28LS35B KV-28LS35E KV-28LS35U KV-32LS35B KV-32LS35E KV-32LS35U
Item
Pal Comb OFF OFF OFF OFF OFF OFF
PIP OFF OFF OFF OFF OFF OFF
RGB Priority ON ON ON ON ON ON
Woofer Box ON ON ON ON ON ON
Scar t 1 ON ON ON ON ON ON
Scar t 2 ON ON ON ON ON ON
Front in (3) ON ON ON ON ON ON
Scar t 4 OFF OFF OFF OFF OFF OFF
Projector OFF OFF OFF OFF OFF OFF
Norm B/G ON ON OFF ON ON OFF
Norm I OFF OFF ON OFF OFF ON
Norm D/K ON ON OFF ON ON OFF
Norm AUS OFF OFF OFF OFF OFF OFF
Norm L OFF OFF OFF OFF OFF OFF
Norm SAT OFF OFF OFF OFF OFF OFF
Norm M OFF OFF OFF OFF OFF OFF
Teletext ON ON ON ON ON ON
Nicam Stereo ON ON ON ON ON ON
WARNING (UK Models only)
The flexible mains lead is supplied connected to a B.S. 1363 fused

plug having a fuse of 5 AMP rating. Should the fuse need to be
replaced, use a 5 AMP FUSE approved by ASTA to BS 1362, ie one
T mark.
that carries the ASA
How to replace the fuse.
IF THE PLUG SUPPLIED WITH THIS APPLIANCE IS NOT SUIT-
Open the fuse compartment with
ABLE FOR THE OUTLET SOCKETS IN YOUR HOME, IT SHOULD a screwdriver blade and replace
BE CUT OFF AND AN APPROPRIATE PLUG FITTED. THE PLUG the fuse.
SEVERED FROM THE MAINS LEAD MUST BE DESTROYED AS A
PLUG WITH BARED WIRES IS DANGEROUS IF ENGAGED IN A FUSE
LIVE SOCKET.
When an alternative type of plug is used, it should be fitted with a

5 AMP FUSE, otherwise the circuit should be protected by a 5 AMP
FUSE at the distribution board.
4
21 pin connector
Pin No 1 2 4 Signal Signal level

1 Audio output B Standard level : 0.5V rms
(right) Output impedence : Less than 1kohm*
Audio output B Standard level : 0.5V rms
2 (right) Output impedence : More than 10kohm*
Audio output A Standard level : 0.5V rms
3 (left) Output impedence : Less than 1kohm*
4 Ground (audio)
21 5 Ground (blue)
20 6 Audio input A Standard level : 0.5V rms
19 (left) Output impedence : More than 10kohm*
18 7 Blue input 0.7 +/- 3dB, 75 ohms positive
17 High state (9.5-12V) : Part mode
16 8 Function select Low state (0-2V) : TV mode
15 (AV control) Input impedence : More than 10K ohms
14 Input capacitance : Less than 2nF
13 9 Ground (green)
12 10 Open
11 11 Green Green signal : 0.7 +/- 3dB, 75 ohms,
10 positive
9 12 Open
8
13 Ground (red)
7
6 14 Ground (blanking)
5 _ _ Red input 0.7 +/- 3dB, 75 ohms, positive

4
15
3 _ (S signal Chroma 0.3 +/- 3dB, 75 ohms, positive
2 input)
1 16 Blanking input High state (1-3V) Low state (0-0.4V)

(Ys signal) Input impedence : 75 ohms
17 Ground (video
output)
18 Ground (video
input)
19 Video output 1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
_ _ Video input 1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
20
_ Video input 1V +/- 3dB, 75ohms, positive sync 0.3V
Y (S signal) (-3+10dB)
21 Common ground
(plug, shield)
Connected Not Connected (open) * at 20Hz - 20kHz
Rear Connection Panel Front Connection Panel
p S Video socket pin configuration

- +
Pin Signal Signal Level

No
S-Video 1 Ground -
socket 2 Ground -
s4
4
3 Y (S signal) input 1V+/- 3dB 75ohm,
MONO
positive Sync. 0.3V
-3 +10dB
L/G/S/I
4 4 C (S signal) input 0.3V+/- 3dB
R/D/D/D
75ohm, positive
Sync.
5
FE-2 SELF DIAGNOSTIC SOFTWARE
The identification of errors within the FE-2 chassis is triggered in one of two ways :- 1: Busy or 2: Device failure to respond to IIC. In the event
of one of these situations arising the software will first try to release the bus if busy (Failure to do so will report with a continuous flashing
LED) and then communicate with each device in turn to establish if a device is faulty. If a device is found to be faulty the relevant device number
will be displayed through the LED (Series of flashes which must be counted) See table 1., non fatal errors are reported using this method.
Each time the software detects an error it is stored within the NVM. See Table 2.
Table 1 How to enter into Table 2
LED 1. Turn on the main power switch of the TV set and enter into
Error Message the
Code
No error 00 ‘Stanby Mode’.
Reserved 01 2. Press the following sequence of buttons on the Remote
OCP ( Over Current Protection ) 02 Commander.
Not Used 03
No Ver tical Sync 04
IKR Error at power on
IIC bus clock and/or data lines low at power on
05
06
i+ 5 -
(ON SCREEN (DIGIT 5) (VOLUME -) (TV)
NVM no IIC bus acknowledge at power on 07 DISPLAY)
Not Used 08
Tuner no acknowledge at power on 09
Sound Processor Error 10 3. The following table will be displayed indicating the error
Jungle controller 8 volts error 11 count.
Flash Timing Example : e.g. error number 3

Table 2
StBy LED
ON ON ON
ERROR MENU
E02 OCP (0, 255) 0

OFF OFF E03 OVP N/A (0, 255) 0
E04 VSYNC (0, 255) 0
E05 IKR (0, 255) 0
E06 IIC (0, 255) 0
E07 NVM (0, 255) 0
E08 JUNGLE (0, 255) 0
E09 TUNER (0, 255) 0
E10 SOUNDP (0, 255) 0
E11 8V (0, 255) 0
WORKING TIME
HOURS 2
MINUTES 11
Note: To clear the error count data press ‘80’ on the Remote
commander.
6
The operating instructions mentioned here are partial abstracts from the ‘Operating
Instruction Manual’. The page numbers of the ‘Operating Instruction Manual’ remain
as in the manual.
Switching On the TV and Automatically Tuning 4 The Auto Tuning menu appears on the screen. Press the Do you want to start
OK button to select Yes. automatic tuning?
The first time you switch on your TV, a sequence of menu screens appear on the TV ena- Yes
No OK
bling you to: 1) choose the language of the menu screen, 2) adjust the picture slant 3) search
and store all available broadcast channels and 4) change the order in which the broadcast OK
channels appear on the screen.

However, if you need to change any of these settings at a later date, you can do that by
selecting the appropriate option in the (Set Up menu) or by pressing the Auto Start Up 5 The TV starts to automatically search and store all Auto Tuning
Button on the TV set. available broadcast channels for you. Programme: 01
Channel: C21
This procedure could take some minutes. Please be

patient and do not press any buttons, otherwise the Searching...
1 Connect the TV plug to the mains socket (220-240V AC, automatic tuning will not be completed.
50Hz)
The first time the TV set is connected, it is usually turned If no channels were found during the auto tuning No channel found
process then a new menu appears automatically on Please connect aerial OK
on. If the TV is off, press the on/off button on the TV
the screen asking you to connect the aerial. Please Confirm
set to turn on the TV.
The first time you switch on the TV, a Language menu connect the aerial (see page 6) and press OK. The
auto tuning process will start again. OK
displays automatically on the TV screen.
GB 6 After all available broadcast channels are captured Programme Sorting

and stored, the Programme Sorting menu appears Programme:
01 TVE
automatically on the screen enabling you to change 02 TVE2
2 Press the or button on the remote control to select Language 03 TV3
7
i4 the order in which the broadcast channels appear on 04 C33 OK
the language, then press the OK button to confirm your Svenska 05 C27
Norsk the screen. 06 C58
selection. From now on all the menus will appear in the English
Nederlands Select channel: OK
Français OK Exit: MENU
selected language. Italiano a) If you wish to keep the broadcast channels in the
i$
Select Language: OK
tuned order, go to step 7.
b) If you wish to store the broadcast channels in a

Programme Sorting
SECTION 1 GENERAL
different order: Programme:

3 Because of the earth’s magnetism, the picture might slant. 01 TVE
If picture slants, please 02 TVE2
The Picture Rotation menu allows you to correct the adjust picture rotation
1 Press the or button to select the programme 03 TV3
04 C33 OK
Not necessary
number with the broadcast channel you wish 05 C27
picture slants if it is necessary. 06 C58 05 C27
Adjust now OK to rearrange, then press the button. Select new position: OK
a) If it is not necessary, press or to select Not Exit: MENU
OK
necessary and press OK. 2 Press the or button to select the new
programme number position for your selected
b) If it is necessary, pressor to select Adjust now, broadcast channel, then press .
then press OK and correct any slant of the picture
between –5 and +5 by pressing or . Finally press 3 Repeat steps b)1 and b)2 if you wish to change
OK to store. the order of the other broadcast channels.
continued... MENU
7 Press the MENU button to remove the menu from the
screen.
Your TV is now ready for use
First Time Operation 7 8 First Time Operation

Level 1 Level 2 Level 3 / Function
Introducing and Using the Menu System Picture Adjustment SLEEP TIMER
Your TV uses an on-screen menu system to guide you through the operations. Use the Mode: Personal
Contrast The “Sleep Timer” option in the “Timer” menu
Brightness
following buttons on the Remote Control to operate the menu system: Colour
Sharpness allows you to select a time period for the TV to
Hue
Reset switch itself automatically into the standby
OK
mode.
1 Press the MENU button to switch the first level menu on. MENU
Timer
To do this: after selecting the option press ,
Timer
Sleep Timer: Off Sleep Timer: Off then press or to set the time period delay
(max. of 4 hours) and finally press OK to store.
OK OK • While watching the TV, you can press the

2 • To highlight the desired menu or option, press or . button on the remote control to display the
time remaining.
• To enter to the selected menu or option, press . • One minute before the TV switches itself into
• To return to the last menu or option, press . standby mode, the time remaining is displayed on
OK
the TV screen automatically.
• To alter settings of your selected option, press / / or .
• To confirm and store your selection, press OK.
Picture Adjustment LANGUAGE
Mode: Personal The “Language” option in the “Set Up” menu
Contrast
Brightness allows you to select the language that the
Colour
MENU Sharpness
3 Press the MENU button to remove the menu from the screen. Hue menus are displayed in.
Reset
OK
GB To do this: after selecting the option, press GB

and then proceed in the same way as in the step
Set Up Set Up 2 of the section “Switching On the TV and Au-
Language Language
Auto Tuning Auto Tuning
tomatically Tuning”.
Programme Sorting Programme Sorting
Progamme Labels
8
Progamme Labels
AV Preset AV Preset
Manual Programme Preset Manual Programme Preset
Menu Guide Detail Set Up Detail Set Up
OK OK

Picture Adjustment Picture Adjustment
PICTURE ADJUSTMENT
Mode: Personal Mode: Personal The “Picture Adjustment” menu allows you to
Contrast Contrast
Brightness Brightness AUTO TUNING
Colour alter the picture adjustments. Picture Adjustment
Colour
Sharpness Sharpness Mode: Personal
Hue Hue Contrast
The “Auto Tuning” option in the “Set Up”
Reset Reset Brightness
Colour menu allows you to automatically search for
OK Sharpness
OK To do this: after selecting the item you want to Hue and store all available TV broadcast channels.
Reset
alter press , then press repeatedly / /
OK
or to adjust it and finally press OK to To do this: after selecting the option, press
store the new adjustment. and then proceed in the same way as in TV
This menu also allows you to customise the Set Up
steps 4 and 5 of the section “Switching On the
Set Up
Language Language TV and Automatically Tuning”.
picture mode based on the programme you are Auto Tuning Auto Tuning
Programme Sorting Programme Sorting
Progamme Labels Progamme Labels
watching: AV Preset AV Preset
Manual Programme Preset Manual Programme Preset
Detail Set Up Detail Set Up
OK
Personal (for individual settings). OK
Live (for live broadcast programmes, DVD

and Digital Set Top Box receivers).
Movie (for films).
continued...
• Brightness, Colour and Sharpness can only be altered if “Personal” mode is selected.
• Hue is only available for NTSC colour signal (e.g: USA video tapes).
• Select Reset and press OK to reset the picture to the factory preset levels.
continued...
Menu System 9 Menu System 11

Teletext
Picture Adjustment
AV2 OUTPUT
Mode: Personal The “AV2 Output” option in the “Detail Set Up” Teletext is an information service transmitted by most TV stations. The index page of the
Contrast
Brightness
Colour menu allows you to select the source to be teletext service (usually page 100) gives you information on how to use the service. To
Sharpness
Hue
Reset output from the Scart connector :2/q. You operate teletext, use the remote control buttons as indicated below.
OK can record from this Scart any signal coming
from the TV or from external equipment Make sure to use a broadcast channel with a strong signal, otherwise teletext errors
Set Up Detail Set Up
Language Auto Format On
connected to the Scart connector :1/ or may occur.
Auto Tuning Noise Reduction: Auto
Programme Sorting AV2 Output: TV side connectors 3 and 3.
Progamme Labels RGB Centring: 0
Picture Rotation: 0
AV Preset
Manual Programme Preset To Switch On Teletext :
Detail Set Up
OK If your VCR supports Smartlink, this
OK After selecting the TV channel which carries the teletext service you wish TELETEXT
procedure is not necessary. Index
to view, press . Programme 25
News 153
Sport 101
To do this: after selecting the option, press . Weather 98
To Select a Teletext page:
Then press or to select the desired
Input 3 digits for the page number, using the numbered buttons.
output signal: TV, AV1, AV3, YC3 or AUTO.
• If you have made a mistake, retype the correct page number.
If you select “AUTO”, the output signal will always be the same one that is displayed on • If the counter on the screen continues searching, it is because this page is not available. In that case,
the screen. input another page number
If you have connected a decoder to the Scart :2/q or to a VCR connected to this Scart, To access the next or preceding page:
please remember to change back the “AV2 Output” to “AUTO” or “TV” for correct Press PROG + ( ) or PROG - ( ).
unscrambling.
To superimpose teletext on to the TV: GB
Whilst you are viewing teletext, press . Press it again to cancel teletext mode.
Picture Adjustment RGB CENTRING
9
Mode: Personal
Contrast When connecting an RGB source, such as a To freeze a teletext page:
Brightness
Colour “PlayStation”, you may need to readjust the
Sharpness Some teletext pages have sub-pages which follow on automatically. To stop them, press
Hue
Reset horizontal position of the picture. In that case,
OK
/ . Press it again to cancel the freeze.
you can readjust it through the “RGB Centring”
option in the “Detail Set Up”.
Detail Set Up To reveal concealed information (e.g: answer to a quiz):
Set Up
Auto Format On
Language Noise Reduction: Auto
Auto Tuning AV2 Output: TV To do this: while watching an RGB source select Press / . Press it again to conceal the information.
Programme Sorting RGB Centring: 0
Progamme Labels Picture Rotation: 0
AV Preset the “RGB Centring” option and press . Then
Manual Programme Preset
Detail Set Up press or to adjust the centre of the To Switch Off Teletext:
OK
OK
picture between –10 and +10. Finally press OK Press .
to confirm and store.
Picture Adjustment PICTURE ROTATION Fastext

Mode: Personal
Contrast Because of the earth’s magnetism, the picture Fastext service lets you access pages with one button push.
Brightness
Colour might slant. In this case, you can correct the
Sharpness While you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at
Hue
Reset picture slant by using the option “Picture the bottom of the teletext page. Press the colour button (red, green, yellow or blue) to access
OK
Rotation” in the “Detail Set Up” menu. the corresponding page.
Set Up Detail Set Up
Language Auto Format On
To do this: after selecting the option, press .
Auto Tuning Noise Reduction: Auto
Programme Sorting AV2 Output: TV Then press or to correct any slant of the
Progamme Labels RGB Centring: 0
AV Preset Picture Rotation: 0 picture between -5 and +5 and finally press OK
Manual Programme Preset
Detail Set Up
to store.
OK OK
16 Menu System Teletext 17

Connecting to external Audio Equipment:
Connecting Optional Equipment
Plug in your Hi-Fi equipment to the audio output sockets E if you wish to amplify the audio
Using the following instructions you can connect a wide range of optional equipment to output from TV. Next, using the menu system, select the “Sound Adjustment” menu. Enter the
your TV set. (Connecting cables are not supplied). “Detail Adjustment” option and set “TV Speakers” to “Off”.
The audio level of the external speakers can be modified by pressing the volume buttons
on the remote control. Also treble and bass settings can be modified through the “Sound
Adjustment” menu.
To enjoy “Dolby Virtual” sound effect through your Left Hi-Fi Right Hi-Fi
Speaker Speaker
Hi-Fi equipment:
Place the speakers of your equipment in front of your
S VHS/Hi8 F sitting place and besides the TV set but keep a distance of
DVC 8mm/Hi8/
camcorder DVC 50 cm from each speaker to the TV set.
camcorder Then by using the menu system, select the menu “Sound
VCR Adjustment”. Next select “Detail Adjustment” and set
A “Dolby Virtual” to “On”. ~50°
Decoder
B
C D E
DVD
VCR
DVD
VCR
1 2
Your sitting position
Hi-fi Using Optional Equipment
“PlayStation”* GB
When you connect the headphones, * “PlayStation” is a product of Sony 1 Connect your equipment to the designated TV socket, as indicated in the previous page.
the TV speakers will automatically Computer Entertainment, Inc.
be muted. Decoder * “PlayStation” is a trademark of Sony 2 Switch on the connected equipment.
10
Computer Entertainment, Inc.
3 To watch the picture of the connected equipment, press the button repeatedly until the
To avoid picture distorsion, do not connect external equipment to connectors A and B at correct input symbol appears on the screen.
the same time.
Symbol Input Signals
Connecting a VCR: 1 • Audio / video input signal through the Scart connector D
To connect a VCR, please refer to the section “Connecting the aerial and VCR” of this instruction • RGB input signal through the Scart connector D. This symbol appears only
manual. We recommend you connect your VCR using a scart lead. If you do not have a scart if a RGB source has been connected.
lead, tune in the VCR test signal to the TV programme number “0” by using the “Manual
Programme Preset” option. (for details of how to manually programme these presets, see page 2 • Audio / video input signal through the Scart connector F.
13, step a).
S 2 • S Video input signal through the Scart connector F.
Refer to your VCR instruction manual to find out how to find the output channel of your VCR.
3 • Video input signal through the phono socket B and Audio input signal
Connecting a VCR that supports Smartlink: through C.
Smartlink is a direct link between the TV set and the VCR. For more information on S 3 • S Video Input signal through the front S Video input jack A and Audio
Smartlink, please refer to the instruction manual of your VCR. signal through C.
If you use a VCR that supports Smartlink, please connect the VCR by using a Scart lead to
the Scart :2/q F. 4 Press button on the remote control to return to the normal TV picture.
continued... For Mono Equipment

Connect the phono plug to the L/G/S/I socket on the front of the TV and select 3 or S 3
input signal using the instructions above. Finally, refer to the “Sound Adjustment” section of
this manual and select “Dual Sound” “A” on the sound menu screen.
18 Additional Information Additional Information 19

Specifications Troubleshooting
Here are some simple solutions to the problems which may affect the picture and sound.
Problem Solution
TV system: Sound Output: No picture (screen is dark) and no • Check the aerial connection.
I sound. • Plug the TV in and press the button on the front of
2 x 14 W (music power)
the TV.
Colour system: 2 x 7 W (RMS) • If the standby indicator is on, press TV button
PAL, Woofer: on the remote control.
SECAM, NTSC 3.58, 4.43 (only Video In) 20 W (music power)
10 W (RMS) Poor or no picture (screen is dark), • Using the menu system, select the “Picture
Channel Coverage: but good sound. Adjustment” menu and select “Reset” to return to the
I: UHF B21-B69 Power Consumption: factory settings.
KV-28LS35U: 90 W
Picture Tube: No picture or no menu information • Check that the optional equipment is on and press the
KV-32LS35U: 88 W
Flat Display FD Trinitron WIDE from equipment connected to the button repeatedly on the remote control until the
Standby Power Consumption: Scart connector. correct input symbol is displayed on the screen.
• KV-28LS35U: 28” (approx. 71 cm.
measured diagonally) 0.54 W
Good picture, no sound. • Press the +/- button on the remote control.
• KV-32LS35U: 32” (approx. 82 cm. Dimensions (w x h x d) : • Check that “TV Speakers” is “On” on the “Sound
measured diagonally) KV-28LS35U: Approx. 806 x 497 x 540 mm. Adjustment” menu.
KV-32LS35U: Approx. 891 x 564 x 584 mm. • Check that headphones are not connected.
Rear Terminals
:1/ 21-pin scart connector Weight: No colour on colour programmes. • Using the menu system, select the “Picture
(CENELEC standard) KV-28LS35U: 43 Kg. Adjustment” menu and select “Reset” to return to
GB factory settings.
including audio/video KV-32LS35U: 60.5 Kg.
input, RGB input, TV Distorted picture when changing • Turn off any equipment connected to the Scart
audio/video output. Accessories supplied:
11
1 Remote Control (RM-932) programmes or selecting teletext. connector on the rear of the TV.
:2/q 21-pin Scart connector 2 Batteries (IEC designated)
(SMARTLINK) (CENELEC standard) Picture slanted • Using the menu system, select the “Picture Rotation”
including audio / video Other features: option in the “Detail Set Up” menu to correct the
input, S video input, • Teletext, Fastext, TOPtext picture slant.
selectable audio / video • Sleep Timer
output and Smartlink Noisy picture when viewing a TV • Using the menu system, select the “Manual
• Smartlink (direct link between your TV set channel. Programme Preset” menu and adjust Fine Tuning
interface.
and a compatible VCR. For more (AFT) to obtain better picture reception.
audio outputs (Left/ information on Smartlink, please refer to • Using the menu system, select the “Noise Reduction”
Right) - phono jacks the Instruction Manual of your VCR). option in the “Detail Set Up” menu and select
• Dolby Virtual “Auto” to reduce the noise in the picture.
Side Terminals • Auto Format
q3 S Video input – 4 pin DIN No unscrambling or unstable picture • Using the menu system, select the “Set Up” menu.
…3 video input – phono jack whilst viewing a scrambling channel Then enter to “Detail Set Up” option and set “AV2
with a decoder connected through Output” to “TV”.
3 audio input – phono jacks
the Scart connector :2/q.
headphones jack
Remote control does not function. • Check that the Media Selector on the remote control is
set according to the device you are using (VCR, TV or
DVD).
• If the remote control does not operate the VCR or DVD
Design and specifications are subject to change without notice. even when the Media Selector has been set correctly.
Enter the necessary code set as explained on “Remote
Control Configuration for VCR/DVD” chapter of this
Ecological Paper- Totally Chlorine Free instruction manual.
• Replace the batteries.
The standby indicator on the TV • Contact your nearest Sony service centre.
flashes.
If you continue to experience problems, have your TV serviced by qualified personnel.
Never open the casing yourself.
Additional Information 21 22 Additional Information
SECTION 2 DISASSEMBLY
2-1. Rear Cover Removal 2-2. Speaker Connector Disconnection

=>
=>
=> <=
=> <=
=>
Release the mains power cable from its securing posts. Before completely removing the rear cover disconnect the
Remove the rear cover fixing screws indicated. Pull the rear speaker connectors which are located on the inside base of
cover away from the front beznet. Take care when removing the beznet.
the rear cover not to damage the speaker cables as speakers
are fitted inside the rear cover.
2-3. Chassis Removal and Refitting
When refitting the chassis ensure that the main bracket is

located in the beznet guide slots before sliding the chassis
forwards. Refit the interconnecting leads in their respective
purse locks.
To remove lift the main bracket rear slightly and slide the
chassis away from the beznet. Ensure that the
interconnecting leads are released from their purse locks to
prevent damage being caused.
12
2-4. A Board PWB Removal [ Step 1 ] 2-5. A Board PWB Removal [ Step 2 ]
Screw. Clip.
Remove the screw securing the PWB to the main bracket. Release the 5 securing clips located at the side and front of the
chassis and slide the PWB clear of the bracket.
2-6. Service Position 2-7. Side Control Module Removal
Screws
Place the A Board PWB in the position indicated to carry out Remove the two screws fixing the user control module to the
servicing. side of the set. The control module can then be removed by
sliding it towards the rear of the set allowing access to the
H2 Board.
13
2-8. Picture Tube Removal
10
1
WARNING:
2
BEFORE REMOVING
THE ANODE CAP
7 5 4
High voltage remains in the CRT even
after the power is disconnected. To
9
avoid electric shock, discharge CRT
before attempting to remove the anode
cap. Short between anode and CRT
coated earth ground strap.
Coated Earth
Ground Strap
6
1. Discharge the anode of the CRT and remove the anode cap.
2. Release the EHT lead from its CRT support bracket.
3. Unplug all interconnecting leads from the Deflection yoke,
degaussing coils, Rotation coil and CRT grounding strap.
4. Remove the C Board from the CRT.
5. Loosen the VM Block fixing screw and remove.
6. Remove the chassis assembly.
7. Loosen the Deflection yoke fixing screw and remove.
8. Remove the Degaussing Coil holders.
9. Place the set with the CRT face down on a cushion.
10. Unscrew the four CRT fixing screws [ located on each CRT
corner ] and remove the CRT.
11. Remove the Degaussing Coils.
Remove the CRT grounding strap and spring tentioners.
[Take care not to handle the CRT by the neck.]
Removal of the Anode-Cap
* REMOVING PROCEDURES.
a b
b
Anode button
1 Turn up one side of the rubber cap in 2 Using a thumb pull up the rubber cap 3 When one side of the rubber cap is
the direction indicated by the arrow a firmly in the direction indicated by the separated from the anode button, the
arrow b anode-cap can be removed by turning
up the rubber cap and pulling it up in
How to handle the Anode-Cap the direction of the arrow c
1. To prevent damaging the surface of the anode-cap do not use
sharp materials.
2. Do not apply too great a pressure on the rubber, as this may cause
damage to the anode connector.
3. A metal fitting called a shatter hook terminal is fitted inside the
rubber cap.
4. Do not turn the rubber foot over excessively, this may cause
damage if the shatter hook sticks out.
14
SECTION 3 SET-UP ADJUSTMENTS
• When complete readjustment is necessary or a new picture Carry out the adjustments in the following order :
tube is installed, carry out the following adjustments. 3-1. Beam Landing.
• Unless there are specific instructions to the contrary, carry 3-2. Convergence.
3-3. Focus.
out these adjustments with the rated power supply.
3-4. White Balance.
• Unless there are specific instructions to the contrary, set the
controls and switches to the following settings : Note : Test equipment required.
1. Color bar/pattern generator.
Contrast .................... 80% [or remote control normal] 2. Degausser.
3. Oscilloscope.
Brightness ................... 50% 4. Digital multimeter.
Preparation: Fig. 3-2.

1. In order to reduce the influence of geomagnetism on the
set’s picture tube, face it in an easterly or westerly direction.
2. Switch on the set’s power and degauss with the degausser.
3-1. Beam Landing
1. Input an all white signal from the pattern generator. Set the
Contrast and Brightness to normal.
2. Set the pattern generator raster signal to Red. Purity
3. Move the deflection yoke forward and adjust with the Fig. 3-3.
purity control so that the Red is at the centre and the Blue
and Green take up equally sized areas on each side of the
screen. [See Fig.3-1 - 3-3].
4. Move the deflection yoke backwards and adjust so that the GREEN
entire screen becomes Red. [See Fig.3-1] RED
5. Switch the raster signal to Blue, then to Green and verify BLUE
the condition.
6. When the position of the deflection yoke has been
determined, fasten the deflection yoke with the screws.
7. If the beam does not land correctly in all the corners, use a
magnet to correct it. [See Fig.3-4]
Disk magnets or
rotatable disk
Purity control corrects magnets correct
this area these areas (a-d)
a b
c d
Fig. 3-1. Deflection yoke positioning

corrects these areas
Caution :
High voltages are present on the Deflection yoke terminals

- take care when handling the Deflection yoke whilst carrying
out adjustments. Disk Magnets
Fig.3-4
15
3-2. Convergence 4. If the V.STAT magnet is moved in the direction of the (a)
and (b) arrows, the Red, Green and Blue points move as
indicated below.
Preparation:
• Before starting this adjustment, adjust the focus, horizontal a b

size and vertical size.
• Minimize the Brightness setting. b B B
• Input a dot pattern from the pattern generator. a

G G
a
Horizontal and Vertical Static Convergence
b R R
Center dot R a
G
B R G B
R G B
a
V.STAT Vertical Static Magnet b

H STAT
convergence
control b
C Board R G B
RV702 (H STAT)
H STAT Convergence
(on mount side)
b
a
a b
R B
Fig.3-5 G G
B R
1. [Moving horizontally], adjust the H.STAT control so that
the Red, Green and Blue points are on top of each other at
the centre of the screen. Operation of the BMC (Hexapole) magnet.
2. [Moving vertically], adjust the V.STAT magnet so that the
Red, Green and Blue points are on top of each other at the R G B R G B R G B
centre of the screen.
3. If the H.STAT variable resistor is unable to bring the Red,
Green and Blue points together at the centre of the screen,
adjust the horizontal convergence with the H.STAT variable
resistor and the V.STAT magnet in the manner indicated
below.
[In this case, the H.STAT variable resistor and the V.STAT R
G
B R G B G
R B
magnet influence each other].
• Tilt the V.STAT magnet and adjust the static convergence by

opening or closing the V.STAT magnet.
The movement of the magnets interact with each other and so

the respective dot position should be monitored while carrying
out this adjustment.
Use the H.STAT VR to adjust the Red, Green and Blue dots so
that they coincide at the centre of the screen
(by moving the dots in the horizontal direction).
16
Geometry Adjustment. YCH Adjustment
Preparation:
+
YCH VR
Before starting this adjustment, adjust the horizontal and + +
Deflection Yoke
vertical static convergence.
1. Remove the deflection yoke spacer.

2. Tilt the deflection yoke as indicated in the figure below and TLV Adjustment
optimise the geometry.
Tilting the DY Up and Down will balance the upper and
lower pin adjustment. +
TLV VR + +
Tilting the DY Left and Right will balance the H-Trap Deflection Yoke
adjustment.
3. Re-install the deflection yoke spacer.
Screen Corner Convergence
If you are unable to adjust the corner convergence properly,

this can be corrected with the use of permalloy magnets.
a b
a-d: screen-corner
convergence defect
c d
Tilt Direction
HTIL Adjustment
Deflection Yoke
Install the permalloy assembly a

for the area that needs correcting.
b
TLH pieces
HTIL correction can be performed by adding a TLH correction

assembly to the Deflection yoke.
Permalloy Assy
X-4387-214-1
c
d Convergence adjustment with permalloy
17
Layout of each control 3-4. Screen (G2), White Balance
[Adjustment in the service mode using the remote

commander]
G2 adjustment
1. Input a dot signal from the pattern generator.

2. Enter the ‘Service Mode’ by pressing ‘TEST’, ‘TEST’ and
‘38’ (TT-38) on the remote commander, to set up the G2
V.STAT Purity service adjustment mode.
3. Whilst watching the picture, adjust the G2 control [SCREEN]
BMC (Hexapole) located on the Flyback Transformer to the point where the
OSD menu indication shows “OK”.
White balance adjustment for TV mode
1. Input an all-white signal from the pattern generator.

2. Enter into the ‘Service Mode’ by pressing ‘TEST’, ‘TEST’
and ‘MENU’ on the Service Commander.
3. Select ‘Service’ from the on screen menu display and press
the right arrow button on the remote commander.
4. The ‘Service’ menu will appear on the screen.
3-3. Focus Adjustment [See Page 19]
5. Set the ‘Contrast’ to MAX.
6. Set the ‘R-Drive’ to 25.
1. Receive a television broadcast signal. 7. Adjust the ‘G-Drive’ and the ‘B-Drive’ so that the white
2. Normalize the picture setting. balance becomes optimum.
3. Adjust the focus control located on the flyback transformer 8. Press the ‘OK’ button to write the data for each item.
to obtain the best focus at the centre of the screen. 9. Set the ‘Contrast’ to MIN.
Bring only the centre area of the screen into focus, the 10. Adjust the ‘G-Cutoff’, and the ‘R-Cutoff’ with the left and
magenta-ring appears on the screen. In this case, adjust the right buttons on the remote commander so that the white
focus to optimize the screen uniformly. balance becomes optimum.
11. Press the ‘OK’ button to write the data for each item.
Focus
Screen
18
SECTION 4 CIRCUIT ADJUSTMENTS
4-1. Electrical Adjustments

SERVICE
Service adjustments to this model can be performed using the Offset-R (0, 63) Adj
supplied remote Commander RM-932. Offset-G (0, 63) Adj
R-Drive (0, 63) 25
G-Drive (0, 63) Adj
B-Drive (0, 63) Adj
How to enter into the Service Mode Peak-Freq (0, 3) 0
Luma-Delay (0, 15) 8
1. Turn on the main power switch and enter into the stand-by mode. SC0 (0, 3) 2
2. Press the following sequence of buttons on the Remote White-Peak (0, 15) 15
Subcont (0, 15) 4
Commander.
Subright (0, 63) 31
Subcol (0, 63) Adj
Subsharp (0, 63) 31
i+ 5 + Cutoff Br. (0, 63) 60
(ON SCREEN (DIGIT 5) (VOLUME +) (TV) Br OSD (0, 15) 10
DISPLAY)
Br TXT (0, 15) 9
‘TT—’ will appear in the upper right corner of the screen.

Other status information will also be displayed. GEOMETRY
3. Press ‘MENU’ on the remote commander to obtain the following V-Linearity (0, 63) Adj
menu on the screen. V-Scroll (0, 63) 32
Left-HBlk (0, 15) 8
Right-HBlk (0, 15) 6
Geometry V-Angle (0, 63) Adj
Service V-Bow (0, 63) Adj
Design H-Centre (0, 63) Adj
Status H-Size (0, 63) Adj
Sound Pin-Amp (0, 63) Adj
IF adjust U-Corner-Pin (0, 63) Adj
Error Menu L-Corner-Pin (0, 63) Adj
Pin Phase (0, 63) Adj
FE-2 Stereo v1.30 V-Slope (0, 63) 35
Factory data FFh FFh V-Size (0, 63) Adj
MSP Device : MSP3411G S-Correction (0, 63) Adj
V-Centre (0, 63) Adj
V-Zoom (0, 63) 23
4. Move to the corresponding adjustment item using the Magenta (0, 63) 40
up or down arrow buttons on the Remote Commander.
5. Press the right arrow button to enter into the required menu item.
6. Press the ‘Menu’ button on the Remote Commander to quit the IF ADJUST
Service Mode when all adjustments have been completed.
AGC Adjust (-16, +15) +0
Note : Automute 1
Audio Gain 0
• Before performing any adjustments ensure that the correct model L Gating 0
has been selected in the ‘Model Setting’ menu.
• After carrying out the service adjustments, to prevent the
customer
Sub Brightness Adjustment
accessing the ‘Service Menu’ switch the TV set OFF and then
ON.
1. Input a Monoscope pattern.
2. Press ‘TEST’ ‘TEST’ 13 on the Remote Commander.
ERROR MENU 3. Adjust the ‘Sub-Brightness’ data so that there is barely a
difference between the 0 IRE and 10 IRE signal levels.
E02 OCP (0, 255) 0
E03 OVP N/A (0, 255) 0
E04 VSYNC (0, 255) 0 Sub Contrast Adjustment
E05 IKR (0, 255) 0
E06 IIC (0, 255) 0
1. Input a video signal that contains a small 100% white area on a
E07 NVM (0, 255) 0
E08 JUNGLE (0, 255) 0 black background.
E09 TUNER (0, 255) 0 2. Connect an digital voltmeter to Pin 10 of J701 [C Board].
E10 SOUNDP (0, 255) 0 3. Adjust the Sub-Contrast [‘TT11’] to obtain a voltage of
E11 8V (0, 255) 0 105 +/- 5V.
WORKING TIME
HOURS 2
MINUTES 11
19
Sub Colour Adjustment Deflection System Adjustment
1. Receive a PAL colour bar signal. 1. Enter into the ‘Geometry’ service menu.
2. Connect an oscilloscope to Pin 5 of CN003 [A Board]. 2. Select and adjust each item in order to obtain the optimum image.
3. Enter into the ‘Service’ service menu.
4. Adjust the ‘Sub Colour’ data so that the Cyan, Magenta and
Blue colour bars are of equal levels as indicated below.
GEOMETRY
V-Linearity (0, 63) Adj

V-Scroll (0, 63) 32
Same Level Left-HBlk (0, 15) 8
Right-HBlk (0, 15) 6
V-Angle (0, 63) Adj
V-Bow (0, 63) Adj
H-Centre (0, 63) Adj
H-Size (0, 63) Adj
Pin-Amp (0, 63) Adj
U-Corner-Pin (0, 63) Adj
B-Out Waveform L-Corner-Pin (0, 63) Adj
Pin Phase (0, 63) Adj
V-Slope (0, 63) 35
V-Size (0, 63) Adj
S-Correction (0, 63) Adj
V-Centre (0, 63) Adj
V-Zoom (0, 63) 23
Tuner AGC Adjustment Magenta (0, 63) 40
Note:
There should be no need to adjust the AGC as this is pre-
adjusted during manufacture of the FRONTEND. If the AGC
does need adjustment then follow steps 1. to 4. below.
V SIZE
1. Receive a signal of 62dBuV / 75 ohm terminated via the tuner
antenna socket.
2. Connect a voltmeter to pin1 of TU101 [print side of A Board]
V LIN
or to the AGC pin of CN001 [mount side of A Board].
3. Confirm that the AGC voltage is 3.5volts +/- 0.3volts.
4. If adjustment is required, then re-adjust the AGC variable
resistor (located at the top rear of the FRONTEND) to obtain
S CORRECTION
a voltage of 3.5V +/- 0.3V.
V CENTRE
H CENTRE
H SIZE
PIN AMP
PIN PHASE
[ Print side of A board ]

CORNER PIN
V ANGLE
20
4-2. TEST MODE 1: 27 Destination ADEKR
28 Destination ADEKR
Test Mode 1 is available by pressing the ‘TEST’ button once, OSD 31 Auto Shutoff Enable/Disable
‘T’ appears. The functions described below are available by selecting 33 Rotation ON/OFF
the indicated keys. The ‘T’ is released automatically after each 35 CRT 4:3 <> 16:9 ; Display TV status
command is executed. 36 Velocity Modulation (VM) OFF/ON test
38 G2 adjustment
KEY T-MODE FUNCTION
41 Re-initialise NVM
volume + volume maximum
43 Select Dual A sound
volume - Picture minimum 44 Select Dual B sound
picture + Picture maximum 45 Select Mono sound
picture - Picture minimum 46 Select Stereo sound
48 Set NVM as non virgin
colour up colour maximum
49 Set NVM as virgin
colour down colour minimum
51 Vir tual Dolby on/off
brightness - bright brightness maximum 52 Subwoofer / MPB (Bass enhancement) Enable
brightness - dark brightness minimum 54 Dot structure C/M (chroma trap)ination ADEKR
hue - purplish hue - purplish 55 Tuner selection (SONY/ALPS)
56 BBE enable/disable
hue - greenish hue - greenish
57 BBE menu line enable/disable
sharpness - sharp sharpness maximum
61 Auto AGC Adjustment
sharpness - soft sharpness minimum 62 AM from baseband enable/disable
balance left balance full left 63 Enable/Disable YC3 connector
balance right balance full right 64 Enable/Disable RGB priority
65 RGB auto-detect enable/disable
treble up treble maximum
66 On timer enable/disable
treble down treble minimum 67 Manual AGC Adjustment
bass up bass maximum 68 Enable/Disable X26 countermeasure (N problem)
bass down bass minimum 69 Enable/Disable ACI feature
71 Force PAL video
72 Un-force PAL (restore normal video condition)
4-3. TEST MODE 2: 73 Enable Zweiton D/K2 system (6.5/6.74)
74 Enable Zweiton D/K3 system (6.5/5.74)
Test Mode 2 is available by pressing the ‘TEST’ button twice, OSD 78 Balance full left
‘TT’ appears. The functions described below are available by 79 Balance full right
selecting the two numbers. To release the ‘Test mode 2’, press 00, 10, 87 Local keys test
20 ... twice or switch the TV set into Stand-by mode. In ‘TT Menu’
89 Enable/Disable watchdog
mode, it is possible to remove the Menu from the screen by pressing
91 Set 14:9 zoom mode
the Speaker Off button once. Pressing the Speaker OFF button a
second time will cause the Menu to reappear. The function is kept 92 Set SMART zoom mode
even when the menu is not displayed on screen !!. 93 Set 16:9 zoom mode
94 Set ZOOM mode
00 'TT' mode off 95 Set 4:3 zoom mode
01 Picture maximum 99 Display Error and Working Time menu
02 Picture minimum
03 Set speaker/headphone Volume to 35%
07 Ageing mode
08 Shipping Condition
11 Sub picture adjustment
12 Sub colour adjustment
13 Sub Brightness adjustment
14 Text H Position adjustment
15 Rotation Coil Test
16 Picture level 50%
19 Factory Mode Enable/Disable
22 Destination BL
24 Destination U
26 Destination BL
21
Memo
22
5-1. BLOCK DIAGRAMS (1)
CN1203
4
MUTE
2
WFR L IN IC604 1 +8V
PH601 2
DUAL DC REGULATOR
1 ISOLATOR
WFR R IN
CN606
4 1
1 LOWB
CN1202
TO F2 BOARD LINE FILTER MAIN RECT
IC001 1
WOOFER CN2603 2 T601 D601
MICRO, VIDEO PROCESSOR, RELAY 2
3
ROM, AUDIO, VIDEO SWITCH RY601
CN001 CN1201
5 SDA XTAL IN 63 4
R AUDIO
TO SPEAKERS CN603
6 CS XTAL OUT 64 1 DGC
78 CS L AUDIO 1 CHECK
IC201 IC601
4 SCL AUDIO AMP 2 DGC CHECK
J1200 T603
2 FB VD 18 SRT
AUD OUT 40 1 IN/INL /OUT W 3
7 AGC VG(H) 16 Q606
CN602
AUDIO MUTE 5 10 MUTE OUT/L 14 18 1 +B
DGC 1 DGC 1 VSENSE IC602
D625 1 2
TU101 D608 ERROR AMP
MUTE SW /OUT R 12 3 CT 17 2
AGC LOWB DGC
IC004 Q212 3
CN1200 4 RT
STBY/
SCL 9 6 L OUT
6 SCL MW +B
6 TIMER
WP 7 77 NVM WP
/IN W 6
SDA 5 L IN VG(L) 12 Q607 16 12 D638
5 SDA 7 SS
TO H2 BOARD RELAY RECT
3 R IN CN908 11 AUDIO
71 SCL SWITCH 9 OCP VS 15 15
VCC
Q601
2 R OUT
72 SDA
D619
3 - 8 LOWB
VIDEO CVBS2/
28 1 T602
CVBSY2
+5V STBY 2 + 7
IC609
J401 STANDBY D618
2
68 POWER 6
J401
5 + (2/2)
3 AGC
7 D622
(1/2) A10 1 5 C 5 VM VCC
A7 BLUE IN +5V STBY 6 -
53 B2/UIN
D624
B10 5 4 4 D 4
A8 MODE1 IC401
1 MODE1
AV LINK QCP DETECT
69 7 3 3
B8 MODE2
80 MODE2 CN504 Q612, 602
RED 1 D632
A11 GREEN IN R0 56 RECT
52 G2/YIN
GREEN 2
A15 RED IN G0 57
51 R2/VIN TO C BOARD
B0 58
BLUE 3 CN703
B15 C2 IN
38 -/C4
IK 6
A16 BLK IK 55 IC501
50 INSSW2 V OUTPUT
DY ASSY
A20 V IN 1 EWD 17
32 CVBS1 VD+
7
B20 Y/V IN 2 VD- 18 IN
37 -/CVBS4Y4 V- DY+
VP 6 V- DY+
VD+ 19 3 BOOST OUT 5
A19 VIDEO IC003 3 65 RESET V- DY- V- DY-
5 V DY
RESET VD-
AUDIO ABL 54 1 REF
A2 H- DY- 4
45 AUDIO 1
/C3 35 H- DY- 3 H DY
CN510
NSC CORRECT 7 TO C BOARD H- DY-
ROT COIL 74
H- DY+ 2
49 AUDIO 3 CN1705 IC531
PIN CORRECTION H- DY+ 1 H- DY+
34 CVBS3 STBY 70 CN405 EWD

5 -
KEY 44 PIN OUT
KEY 2 7
Q532
6 +
LED 66 TO F2 BOARD HP
LED 6
CN2901 PROTECT
77 3 +
SIRCS
SIRCS 67 1
2 -
+3.3V
STBY
IC201
MSP3410D-PP-B4
A3 SC1 OUT L
37 SC1 OUT L XTAL OUT 63
T511
A1 SC1 OUT R
36 SC1 OUT R XTAL IN 62 FBT
B3 SC2 OUT L HV TO PICTURE

34 SC2 OUT L SC3 IN R 47
TUBE
B1 SC2 OUT R 1
33 SC2 OUT R SC3 IN L 46
G2 TO C BOARD
4
DACM SUB 31
CN706
+B 3
J402 FV
IC608
HP 5
AUDIO STBY D571, 13
L 3.3V REG +3.3V Q571,574
6
VIDEO 12
VIDEO
ABL
AUDIO 11
R
T531 D513
HDT 10
+15V RECT
HD H-DRIVE H-OUT
9
Q535 Q533
CN406
1 R 8
4 L
7
TO H2 BOARD 6 CVBS/Y
D514
CN906 -15V RECT
8
CN508
C
H1 5
9 KEY TO C BOARD
200V 1 CN707
A( )
POWER SUPPLY, DEFLECTION,
SMALL SIGNAL BOARD,
AUDIO AMPLIFIER
23 24
5-1. BLOCK DIAGRAMS (2)
CN703
R R POWER
5-2. CIRCUIT BOARD LOCATION Reference Information
1
3 R IN KR 7
G G
2 CN2601 CN2603
1 G IN KG 9
PICTURE TUBE 1 1
B RESISTOR RN : METAL FILM
TO A BOARD 3 B TO A BOARD
2 B IN KB 8
CN504 2 2 CN3601
6 IK H
RC : SOLID
5 IK R
G G C Board
7
C
V
2 4 CN2150 C FPRD : NON FLAMMABLE CARBON
IC701
H
V
STBY 5V 2 SWITCH
Q2151
C FUSE : NON FLAMMABLE FUSIBLE
H1
TO A BOARD
SWITCH
IC2150
VM Board
N RS : NON FLAMMABLE METAL OXIDE
CN405 LED 6
Q2150 1
RCV SIRCS 7
2
VM RB : NON FLAMMABLE CEMENT
G2 CVM Board RW : NON FLAMMABLE WIREWOUND
H
+8V 6
5
-
+
7
ROT - 3
CN1801
TO
TO BOARD
F2 ( POWER SWITCH,
RESPONSE LED,
IR RECEIVER ) A F2 Board J
S1 Board
A2 COIL LF-8L
: ADJUSTMENT RESISTOR
: MICRO INDUCTOR
ROTATION
T511 (FBT)
2 +
6
ROT + 1 COIL D2 Board
NS CORRECT
3 - CAPACITOR TA : TANTALUM
IC1801
ROTATION AMP A1 PS : STYROL
D2 AA Board
C( RGB OUT
) D1
H2 Board
D
PP
PT
: POLYPROPYLENE
: MYLAR
A BoardD3 Board F3 Board
CN3601 CN3603 MPS : METALIZED POLYESTER
1 1
TO F2 BOARD LINE FILTER TO A BOARD MPP : METALIZED POLYPROPYLENE
CN2603 2 T3602 2 CN606
5-3. SCHEMATIC DIAGRAMS AND ALB : BIPOLAR
PRINTED WIRING BOARDS ALT : HIGH TEMPERATURE
J900
CN908
Note :
ALR : HIGH RIPPLE
WOOFER MUTE
1
F3 ( AC FILTER,
FUSE ) •
•
All capacitors are in µF unless otherwise noted.
pF : µµF 50WV or less are not indicated except for
electrolytic types.
5 • Indication of resistance, which does not have one for
AUDIO L OUT
TO A BOARD rating electrical power, is as follows.
CN208 6
AUDIO L IN
J900
Note : The components identified by shading
AUDIO R IN
2 Pitch : 5mm
HEADPHONES Electrical power rating : 1/4W
and marked are critical for safety.
3
AUDIO R OUT
Replace only with the part numbers
• Chip resistors are 1/10W specified in the parts list.
CN906 • All resistors are in ohms.
FUNCTION CN2801 k = 1000 ohms, M = 1000,000 ohms
1
KEY SWITCH J901
TO D2 BOARD 1 SW SWITCH SWITCH
S900-S902
CN8802 Q2801 RY2801
• : nonflammable resistor. Note : Les composants identifiés par une trame et
TO A BOARD
CN406
AUDIO L
6
9
L DY ASSY H- DY+
CN2802
1 H-DY+
par une marque sont d'une importance
AUDIO R R • : fusible resistor. critique pour la sécurité. Ne les remplacer
H- DY- 2 H-DY+
VIDEO que par des pièces de numéro spécifié.
H DY • : internal component.
4 1 Y/C
3 H-DY-
specified.
Y/CVBS 3 V DY
V- DY- 4 H-DY-
2 • : panel designation or adjustment for repair.
C 4
2 V- DY+ 5 V-DY-
6 V-DY+
• All variable and adjustable resistors have
characteristic curve B, unless otherwise noted.
CN2803 • All voltages are in Volts.
H2( AUDIO IN,

Y/C IN, HEADPHONE IN ) H-DY+ 1
H-DY+ 2
T2801
•
•
Readings are taken with a 10Mohm digital mutimeter.
Readings are taken with a color bar input signal.
• Voltage variations may be noted due to normal production
H-DY- 3
TO A BOARD
tolerences.
CN501 H-DY- 4
V-DY- 5 • : B + bus.
D3 ( )
V-DY+ 6
4:3 SWITCHING • : B - bus.
• : RF signal path.
• : earth - ground.
• : earth - chassis.
CN8801
CN1701 HDY- 8
9 IC1902 QP OUT
2 7 SMART CORR 6
DF/DQP/TIMING Q1841
CN1718
TO 1
Q.P.-
A BOARD 135V
2 SWITCH
CN501 Q.P.+ 3 TO A BOARD Q8804,Q8805
4 Q.P. CN512 1 3 SWITCH
Q8801
8 VM VM AMP VM
VM AMP VM OUT SWITCH 2 SWITCH
BUFFER
Q1701, 1702, Q1708, 1711 Q8802 2 4
Q1704, 1705 VM
GND
8V 1 IC8801
SMART MODE
CN1702
IC1901
COMPARATOR NECK ASSY DEFLECTION
TO 15V PULSE
CN8802
3 -
A BOARD 3
1 SWITCH 1
CN503 +9V 2 +
D2 ( )
CN1809 TO D3 BOARD
CN2801 8V 3 SMART MODE
5 + DF 1
7 SWITCH
6 -
VM ( VELOCITY MODULATION,
DYNAMIC FOCUS AND DQP )
25 26
C Board Waveforms
C board Waveforms
TP1 10us/div TP2 20us/div

TP3
20us/div
1.77 Vp-p (H) 1.88 Vp-p (H) 1.88 Vp-p (H)

20us/div
TP4
TP4 TP5
20us/div
TP6
20us/div
74 Vp-p (H) 74 Vp-p (H) 74 Vp-p (H)

20us/div
TP7
1.76 Vp-p (H)
IC Voltage Table
Ref No Pin No Voltage (V) Ref No Pin No Voltage (V)
1 3.1 1 1.3
2 2.1 2 1.3
3 3.0 3 1.4
IC1701 5 5.5 IC1801 5 4.1
7 131 6 4.1
8
9
123
124.6
7
8
7.0
8.0
C [ R,G,B OUT ]
27 28
VM [ VELOCITY MODULATION ]
29 30
Difference Table
Ref 28LS35B 28LS35E 28LS35U 32LS35B 32LS35E 32LS35U
C1803 - - - 0.022UF 0.022UF 0.022UF
C1804 - - - 10UF 10UF 10UF
C1805 - - - 47PF 47PF 47PF
C1912 100PF 100PF 100PF - - -
C1913 0.0022UF 0.0022UF 0.0022UF 0.0015UF 0.0015UF 0.0015UF
C1914 330PF 330PF 330PF 150PF 150PF 150PF
CN1801 - - - 3P 3P 3P
D1801 - - - MTZJ-T-77-10 MTZJ-T-77-10 MTZJ-T-77-10
L1901 10MH 10MH 10MH 15MH 15MH 15MH
L1959 22MH 22MH 22MH 10MH 10MH 10MH
R1801 - - - 100K 100K 100K
R1805 - - - 10K 10K 10K
R1806 - - - 680 K 680K 680K
R1807 - - - 10K 10K 10K
R1808 - - - 10K 10K 10K
R1809 - - - 10K 10K 10K
R1810 - - - 10K 10K 10K
R1847 180 180 180 68 68 68
R1848 100 100 100 68 68 68
R1916 5.6K 5.6K 5.6K 3.9K 3.9K 3.9K
R1931 33K 33K 33K 39K 39K 39K
R1966 390 390 390 150 150 150
VM [ PRINTED WIRING BOARD ] H2 [ AV3 INPUT ]

31 32
F2
D2
F2 [ POWER SWITCH, RESPONSE LED, IR ] D2 [ SMART MODE SWITCH ]

33 34
D3
F3
D3 [ 4:3 SWITCHING ] F3 [ AC FILTER, FUSE ]
35 36
A B C D E F G H I J K L M IC Voltage Table Semiconductor
Pin Volts Ref Pin Volts Ref Pin Volts Voltage Table
Ref No
No (V) No No (V) No No (V)
Ref (e) (b) (c)
1 1 0 50 0.2 6 13.9
IC501 Q013 0 0.7 0
2 3.2 51 2.5 7 0.3
3 2.9 52 2.5 1 1.4 Q016 0 0 3.3
5 0 53 2.5 2 2.3 Q212 0 0.7 0
6 2.0 54 2.1 3 1.8 Q401 4.8 4.2 1.8
IC531
8 2.3 55 5.2 5 2.4 Q411 1.1 1.7 4.2
9 8.0 56 3.0 6 1.6 Q601 5.6 4.8 5.3
2 10 5.0 57 3.1 7 6.4
Q602 14.2 5.1 8
12 0 58 3.1 1 -80.4
13 0 59 3.2 2 -80.5 Q603 8 8 0
14 4.0 62 0 3 -80.2 Q604 0 0 2.5
16 1.4 63 0 4 -80.2 Q608 0 0 5.6
17 1.5 64 0 5 -81.5 Q609 5.6 5.6 0
18 0 65 0 6 -81.6 Ref (s) (g) (d)
3 IC001
19 0 67 4.8 7 -77.8
Q606 10.9 14.5 86.7
20 3.8 68 0.4 IC601 9 -81.8
IC001 Q607 -82.4 -79.9 10.9
21 3.8 69 0 10 -76
22 5.0 70 0 11 -81.9 Q535 0 2.5 95.2
26 0 71 0 12 -79.4
28 3.5 72 0 14 16.5
29 3.6 73 7.1 15 11
4 30 1.9 74 5.0 16 14.4
31 0.3 75 8.1 18 86.4
32 3.6 76 -3.5 1 11
34 1.9 77 0 3 4.9
35 1.4 78 3.2 5 0
36 3.9 79 3.2 6 0
38 1.8 80 0 IC1201 7 11.3
5 40 3.3 1 1.4 9 0.3
42 3.3 2 2.3 10 0
IC501
43 1.4 3 1.8 12 0
45 0 5 2.4 14 11.35
Difference Table
Ref 28LS35B 28LS35E 28LS35U 32LS35B 32LS35E 32LS35U
C019 22PF 22PF 22PF - - -
C536 0.82UF 0.82UF 0.82UF IUF IUF IUF
7 C542 680PF 680PF 680PF 0.001UF 0.001UF 0.001UF

C546 0.056UF 0.056UF 0.056UF 0.051UF 0.051UF 0.051UF
C555 22000PF 22000PF 22000PF 19000PF 19000PF 19000PF
C619 - - - 330PF 330PF 330PF
C621 - - - 330PF 330PF 330PF
JR21 560 560 560 - - -
JR421 SHORT 0 SHORT 0 SHORT 0 - - -
8 L002 47UH 47UH 47UH - - -
R001 SHORT 0 SHORT 0 SHORT 0 - - -
R105 - - - 0UH 0UH 0UH
R513 4.7K 4.7K 4.7K 22K 22K 22K
R517 10K 10K 10K 22K 22K 22K
R521 100K 100K 100K 220K 220K 220K
9 R532 1K 1K 1K 4.7K 4.7K 4.7K
R533 10K 10K 10K 15K 15K 15K
R534 82K 82K 82K SHORT 0 SHORT 0 SHORT 0
R535 - - - 220K 220K 220K
R546 820 820 820 1K 1K 1K
R568 680 680 680 820 820 820
R583 22K 22K 22K 15K or 22K 15K or 22K 15K or 22K
10
T511 1-453-308-31 1-453-308-31 1-453-308-31 1-453-308-41 1-453-308-41 1-453-308-41
T533 1-433-980-12 1-433-980-12 1-433-980-12 1-429-306-11 1-429-306-11 1-429-306-11
TU101 BTF-EF411 BTF-EC411 BTF-EU611 BTF-EF411 BTF-EC411 BTF-EU611
Semiconductor Location Table

NOTE: DIODE D013 M-1 D103 E-1 D236 D-3 D411 C-3 D424 M-2 D505 M-2 D538 E-6 D612 G-5 D625 H-6 TRANSISTOR Q532 D-4 Q609 J-6 IC004 H-2
Portions of the circuit marked as shown are high D001 I-2 D016 J-2 D104 E-2 D239 D-3 D412 D-3 D427 A-4 D506 D-4 D539 B-5 D613 J-6 D627 K-7 Q013 I-3 Q533 A-6 Q1210 H-3 IC401 I-3
voltage areas. Use care to prevent electric shock D002 I-3 D018 I -3 D105 A-1 D402 E-3 D413 C-3 D428 C-3 D507 M-2 D541 F-5 D614 K-8 D628 L-7 Q014 L-1 Q535 B-4 Q1211 H-3 IC501 E - 10
during inspection or repair. D003 K-2 D020 M-8 D106 B-1 D403 B-2 D414 B-2 D429 D-3 D512 D-8 D573 F-5 D615 H-5 D629 L-7 Q049 J-3 Q601 K-5 Q1230 B-3 IC531 F-4
D004 M-4 D021 L -2 D107 B-2 D404 I-3 D418 B-3 D435 A-2 D513 D-9 D601 I-9 D618 H-6 D631 L-7 Q202 E-3 Q602 G-5 Q1231 B-3 IC601 F - 10
D006 M-8 D022 J-2 D207 F-3 D405 B-2 D419 E-2 D436 A-2 D514 C-9 D602 J-5 D619 H-6 D632 K-5 Q203 F-2 Q603 G-5 Q1232 B-3 IC602 F-7
D007 K-1 D035 K-3 D210 I-5 D406 B-2 D420 B-2 D501 D-9 D534 E-5 D604 F-9 D620 M-5 D633 L-5 Q212 I-5 Q604 H-5 Q1233 C-2 IC604 H-5
D008 L-3 D036 K-3 D211 I-5 D407 B-2 D421 C-2 D502 D-9 D535 E-6 D608 F-8 D621 J-5 D638 I-6 Q401 C-1 Q606 G - 10 IC'S IC608 L-5
A [ PRINTED WIRING BOARD ]

D010
D011
G- 2
F-2
D051
D101
L-3
B-1
D212
D228
I-5
E-4
D408
D410
B-2
C-2
D422
D423
C-2
C-2
D503
D504
I-2
I-2
D536
D537
B-6
C-4
D610
D611
J-5
G-5
D622
D623
H-7
J-5
D640 L-5 Q409
Q411
G-1
D-2
Q607
Q608
G-9
J-6
IC001
IC002
K-2
M-8
IC609
IC1201
L-6
H-4
37 38
KV-28/32LS35
[9-927-406-01]
A [ POWER SUPPLY, DEFLECTION, AUDIO AMPLIFIER (Page 1/2) ]
39 40 41
A Board Waveforms
20us/div 20us/div 20us/div
20us/div 20us/div 20us/div
TP1 TP2 TP3 TP4 TP5 TP6
1.88 Vp-p (H) 1.84 Vp-p (H) 1.86 Vp-p (H) 6.0 Vp-p (H) 5.4 Vp-p (H) 16.8 Vp-p (H)
20us/div 5ms/div 5ms/div 20us/div

5ms/div
TP7 TP8 TP9 TP10 TP11
1.83 Vp-p (V) 488 mVp-p (V) 49.8 Vp-p (V) 1.06 kVp-p (H) 50.8 Vp-p (V)
A [ POWER SUPPLY, DEFLECTION, AUDIO AMPLIFIER (Page 2/2) ]
42 43 44
5-4. SEMICONDUCTORS
LM358N TDA9394H IRF614-005
LM393DT IRF614-037
LM393N IRF620
64 41
M5216P
TDA2822M
65 40
TEA2124
8 7 6 5
80 25 B
C E
1 2 3 4 1 24
( TOP VIEW ) ( MARKING SIDE VIEW )
2SA933AS-QT
2SAG33ASQT
2SA933AS-RT
MSP3411G-PP-B9 TOP209P 2SC1740S-RT
2SC2785-HFE
LETTER SIDE
64 33
( TOP VIEW )
1 32
E
C B
BF421-AMMO
SE-135N 2SC2785-HFE
2SA1091-O
SE135N-LF4
E C B B
E C
3
1 V OUT
1 2 2 V IN
3 GND
DTA144ESA 2SK2518-01MR
DTA144ESA 2SK2251-01-F19
DTC114ESA 2SK2640-01MR
DTC114EKA-T146
STV9379 DTC143TKA-T146
DTC144EKA-T-146R
R2SA1162-G
2SA1037AK-T146
2SC1623-L5L6
2SD601A-Q-TX
2SC1623-L5-L6
E B C
2SC2412K-QR
1 2SC2412K-T-146-QR
7
E
B
45
AK04-V1 ERD28-06S ERA38-06 MTZJ-T-72-10B
AU-01Z-V1 ERC06-15S ERA81-004TP1 MTZJ-T-77-15B
BYD33G FMN-G12S ERA83-006 MTZJ-T-77-33A
BYD33G-AMMO GP08D MTZJ-3.6A MTZJ-33C
DINL20-TA RGP10GPKG23 MTZJ-T-77-2.2A MTZJ-7.5B
D1NL20U RG15GPKG23 HZS9.1NB2 P6KE200ASY
DINL40-TA2 RG1CLF-B1 MTZJ-T-77-3.6B RD3.6ES-B2
ERB44-06TP1 RU-3AM MTZJ-4.7C RD3.9ES-B2
EGP20G RU3YX-LF-C4 MTZJ-T-77-5.1B RD5.1ESB2
EG-1Z-V1 RU3YX-V1 MTZJ-T-77-5.6B RD5.6ESB2
EL1Z RU-4AM-T3 MTZJ-T-77-6.8A RD6.8ES-B2
ERD28-06S 1SS292T-77 MTZJ-T-77-8.2B RD7.5ESB2
MTZJ-7.5B RD9.1ES-B3
MTZJ-T-77-9.1A RD10ESB2
MTZJ-T-77-9.1B RD15ESB2
MTZJ-T-77-10 1SS119-25
MTZJ-T-72-10A 1SS133T-77
CATHODE
CATHODE
ANODE
ANODE
SLA-570KT3F
DAN202K
DAN202K-T146
MA8330-TX
DTZ33B
3
CATHODE
ANODE
1
2
2 3 1
1SS355TE-17
DTZ-TT11-6.8B
RD12SB2
UDZS-TE-17-4.7B
UDZSTE-175.6B
UDZS-TE-17-6.8B
UDZSTE-179.1B
UDZ-TE-17-22B
D4SB60L
ANODE
CATHODE
UF4005PKG23
ANODE
CATHODE
46
5-5 IC BLOCK DIAGRAMS
A BOARD IC604 BA41W12ST-V5
A BOARD IC401/IC531 LM393DT

SW
2 Vref -
1
+
1
5
-
7
+
3 GND 2
- -
+
4 3
+ 6
A BOARD IC601 MCZ3001D
18 8
Remote
DVLD Internal OFF Driver
15v/8v ref 5v Sel=34v TSD Reg. 10v
14
Level 16
Shift
1 Vsense
15
Control
Latch Logic
10
Centre
12
SS Osc
11
F/B Timer
5 OCP 9
7 4 3 2 6
A BOARD IC1201 TDA7497
13
Vss
1 +
14
-
8 Sgn Gnd MUTE/STBY

9
PROTECTION
10
11 Pwr Gnd 60K
5 +
12
-
Pwr
7 15
Gnd
47
SECTION 6
EXPLODED VIEWS
NOTE :
Items with no part number and no description are not Items marked “*” are not stocked
stocked because they are seldom required for routine since they are seldom required for
service. routine service. Some delay should
The construction parts of an assembled part are indicated be anticipated when ordering these
with a collation number in the remarks column. items.
6-1. CHASSIS
15
16
17 10
14
20
18
9
11 8
19
7
6
12
5
13 4
1 2
20
UK Models
only
21 19
REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK

1 £ 1-571-433-21 SWITCH, PUSH (AC POWER) 11 *A-1632-945-A A BOARD, COMPLETE (KV-28LS35B)
2 *4-202-531-01 AC CORD LOCK (SC) *A-1632-946-A A BOARD, COMPLETE (KV-28LS35E)
3 £ 1-765-286-11 CORD, POWER (KV-28LS35B/28LS35E/ *A-1632-934-A A BOARD, COMPLETE (KV-28LS35U)
KV-32LS35B/32LS35E) *A-1632-939-A A BOARD, COMPLETE (KV-32LS35B)
£ 1-776-204-12 CORD, POWER (FILTER) (KV-28LS35U/32LS35U) *A-1632-940-A A BOARD, COMPLETE (KV-32LS35E)
4 *4-206-048-01 BRACKET, MAIN (KV-28LS35) *A-1632-931-A A BOARD, COMPLETE (KV-32LS35U)
*4-206-048-11 BRACKET, MAIN (KV-32LS35) 12 *A-1624-099-A F2 BOARD, COMPLETE
5 1-424-733-11 COIL, PFC CHOKE 65MMH 13 *4-206-055-01 BRACKET, F2 (KV-28LS35)
6 *A-1640-431-A D3 BOARD, COMPLETE *4-206-055-11 BRACKET, F2 (KV-32LS35)
7 *A-1624-100-A F3 BOARD, COMPLETE 14 4-206-089-01 COVER, REAR (KV-28LS35)
8 £ 1-453-308-41 TRANSFORMER ASSY, FLYBACK (NX4521//Z2B4) 4-206-062-01 COVER, REAR (KV-32LS35)
(KV-28LS35) 15 7-685-663-79 SCREW +BVTP 4x16 TYPE 2 IT-3 (KV-28LS35)
£ 1-453-308-31 TRANSFORMER ASSY, FLYBACK (NX4521//Z2B4) 4-039-358-01 SCREW (4x16), (+) BV TAPPING (KV-32LS35)
(KV-32LS35) 16 *A-1678-212-A WOOFER COMPLETE ASSY (KV-28LS35) 17,18
9 *A-1642-285-A D2 BOARD, COMPLETE (KV-28LS35) *A-1678-205-B WOOFER COMPLETE ASSY (KV-32LS35) 17,18
*A-1642-281-A D2 BOARD, COMPLETE (KV-32LS35) 17 1-529-417-11 SPEAKER (8CM)
10 8-598-535-10 FRONTEND (BTF-EF411) (KV-28LS35B) 18 7-685-663-71 SCREW +BVTP 4x16 TYPE 2 IT-3 (KV-28LS35)
8-598-533-00 FRONTEND (BTF-EC411) (KV-28LS35E) 4-039-358-01 SCREW (4x16), (+) BV TAPPING (KV-32LS35)
8-598-529-00 FRONTEND (BTF-EU611) (KV-28LS35U) 19 1-529-408-11 SPEAKER (4.2x24CM)
1-693-555-11 TUNER STEREO (KV-32LS35B) 20 4-058-870-01 SCREW, (4x16) W (+) P TAPPING (KV-28LS35)
1-693-556-11 TUNER STEREO (KV-32LS35E) 4-039-358-01 SCREW (4x16), (+) BV TAPPING (KV-32LS35)
1-693-557-11 TUNER STEREO (KV-32LS35U) 21 *A-1646-242-A H2 BOARD, COMPLETE
48
6-2. PICTURE TUBE 67
73
66
74
75
76
72
77 70 69
68
71 66
65
63 64
51
61 62
60
58
59
55 54
58
56
57
52
53

51 X-4200-736-1 BEZNET ASSY (KV-28LS35) 52-55 64 4-369-318-21 SPRING, TENSION (KV-28LS35)
X-4200-724-1 BEZNET ASSY (KV-32LS35) 52-55 4-200-433-01 SPRING, EXTENSION (KV-32LS35)
52 4-205-948-01 POWER BUTTON (KV-28LS35) 65 £ 1-416-466-21 COIL, DEMAGNETIC (KV-28LS35)
4-205-948-11 POWER BUTTON (KV-32LS35) £ 1-416-769-11 COIL, DEMAGNETIC (KV-32LS35)
53 4-204-426-01 SPRING (KV-28LS35) 66 *4-203-390-71 CUSHION, DGC
4-202-964-11 SPRING (KV-32LS35) 67 *4-202-745-01 HOLDER, DGC (KV-28LS35)
54 4-205-375-01 GUIDE, LIGHT (KV-28LS35) *4-059-569-01 HOLDER, DGC (KV-32LS35)
4-205-375-11 GUIDE, LIGHT (KV-32LS35) 68 8-453-011-11 NECK ASSY, NA299-M
55 4-204-865-01 SHEET, BLOTTING (KV-28LS35) 69 *4-202-693-01 HOLDER, HV CABLE (KV-32LS35)
4-204-058-41 SHEET, BLOTTING (KV-32LS35) 70 £ 1-251-537-22 CAP ASSY, HIGH VOLTAGE (KV-28LS35)
56 X-4200-712-1 DOOR ASSY (KV-28LS35) 57 £ 1-251-946-11 CAP ASSY, HIGH VOLTAGE (KV-32LS35)
X-4200-712-2 DOOR ASSY (KV-32LS35) 57 71 3-704-495-01 SPACER, DY (KV-28LS35)
57 4-047-464-01 CATCHER, PUSH 4-203-658-01 SPACER, DY (KV-32LS35)
58 4-203-098-01 SUPPORTER,CRT (KV-32LS35) 72 4-046-765-12 SCREW, TAPPING 7 + CROWN WASHER
59 £ 8-737-786-05 PICTURE TUBE (W66LLX060X) (KV-28LS35) (KV-28LS35)
£ 8-735-054-05 PICTURE TUBE (W76LLZ060X) (KV-32LS35) 4-204-225-01 PT-SCREW (KV-32LS35)
60 8-451-521-11 DEFLECTION YOKE (Y28RVC3-B) (KV-28LS35) 73 4-308-870-00 CLIP, LEAD WIRE
1-451-520-11 DEFLECTION YOKE (Y32RVC3) (KV-32LS35) 74 1-452-094-00 MAGNET, ROTATABLE DISK; 15MM Ø
61 1-452-896-11 COIL, NA ROTATION (RT-200) 75 1-452-032-00 MAGNET, DISK; 10MM Ø
62 *A-1645-050-A VM BOARD, COMPLETE (KV-28LS35) 76 X-4387-214-1 PERMALLOY ASSY, CORRECTION
*A-1645-049-A VM BOARD, COMPLETE (KV-32LS35) 77 3-701-007-00 BAND, BINDING
63 *A-1638-156-A C BOARD, COMPLETE
49
SECTION 7
ELECTRICAL PARTS LIST
PARTS LISTING TABLE OF CONTENTS
Page
F2 BOARD COMPLETE Parts List : ............................................................................................ 51
F3 BOARD COMPLETE Parts List : ............................................................................................ 51
A BOARD COMMON Parts List : Parts common to all models listed in this manual ..................... 51
A BOARD VARIANT Parts List : Parts that belong only to the model specified
Model
KV-28LS35 ............................................................................................. 59
KV-32LS35 ............................................................................................. 59
C BOARD COMPLETE Parts List : ............................................................................................. 59
D3 BOARD COMPLETE Parts List : ............................................................................................. 60
D2 BOARD COMMON Parts List : Parts common to all models listed in this manual ..................... 60
D2 BOARD VARIANT Parts List : Parts that belong only to the model specified
Model
KV-28LS35 ............................................................................................. 61
KV-32LS35 ............................................................................................. 61
VM BOARD COMMON Parts List : Parts common to all models listed in this manual ..................... 61
VM BOARD VARIANT Parts List : Parts that belong only to the model specified
Model
KV-28LS35 ............................................................................................. 63
KV-32LS35 ............................................................................................. 63
H2 BOARD COMPLETE Parts List : ............................................................................................ 63
MISCELLANEOUS : ............................................................................................. 64
ACCESSORIES AND PACKAGING MATERIALS : ........................................................................................ 64
Note : Refer to the designated variant parts list when seeking a part indicated by an asterisk (*)
Parts indicated (XX) on the Schematic Diagram are not used in this model and
therefore do not appear in the Parts List.
50
F2 F3 A
*A-1624-099-A F2 Board, Complete < FUSE >
4-205-711-01 HOLDER, LED F3601 £ 1-576-232-21 FUSE (H.B.C.) 5A/250V

*1-533-725-11 HOLDER, FUSE (F3601)
< CAPACITOR >
< RESISTOR >
C2150 1-126-969-11 ELECT 220UF 20.00% 50V
C2601 1-113-924-11 CERAMIC 0.0047UF 20.00% 250V R3601 1-202-719-00 SOLID 1M 10% 1/2W
< CONNECTOR > < TRANSFORMER >
CN2150 *1-564-510-11 PLUG, CONNECTOR 7P T3602 1-433-488-11 TRANSFORMER, LINE FILTER

CN2601 *1-580-844-11 PIN, CONNECTOR (POWER)
CN2602 1-695-915-11 TAB (CONTACT) < VARISTOR >
CN2603 *1-691-291-11 PIN, CONNECTOR (PC BOARD) 5P
VD3601 1-803-830-31 VARISTOR (ERZV14D621)
< DIODE >
*A-1632-945-A A Board, Complete (KV-28LS35B)
D2150 8-719-081-56 DIODE L-59SRSGC-CC *A-1632-946-A A Board, Complete (KV-28LS35E)
D2152 8-719-109-89 DIODE RD5.6ESB2 *A-1632-934-A A Board, Complete (KV-28LS35U)
*A-1632-939-A A Board, Complete (KV-32LS35B)
< IC > *A-1632-940-A A Board, Complete (KV-32LS35E)
*A-1632-931-A A Board, Complete (KV-32LS35U)
IC2150 8-749-014-59 IC TSOP1740KS1
A Board, Common Parts
< TRANSISTOR >
1-900-903-72 LEAD ASSY, FOCUS
Q2150 8-729-027-38 TRANSISTOR DTA144EKA-T146 4-382-854-01 SCREW (M3X8), P, SW (+)
Q2151 8-729-027-43 TRANSISTOR DTC114EKA-T146 4-382-854-01 SCREW (M3X8), P, SW (+)
< RESISTOR > < CAPACITOR >
R2150 1-216-813-91 RES CHIP 220 5% 1/16W C002 1-163-233-91 CERAMIC CHIP 18PF 5.00% 50V
R2151 1-216-813-91 RES CHIP 220 5% 1/16W C004 1-163-037-11 CERAMIC CHIP 0.022UF 10.00% 50V
R2152 1-216-841-91 RES CHIP 47K 5% 1/16W C005 1-126-926-91 ELECT 1000UF 20.00% 10V
R2153 1-216-829-91 RES CHIP 4.7K 5% 1/16W C006 1-163-233-91 CERAMIC CHIP 18PF 5.00% 50V
R2154 1-216-825-91 RES CHIP 2.2K 5% 1/16W C009 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
R2155 1-216-809-91 RES CHIP 100 5% 1/16W C010 1-164-005-11 CERAMIC CHIP 0.47UF 16V
R2156 1-216-815-91 RES CHIP 330 5% 1/16W C011 1-163-005-91 CERAMIC CHIP 470PF 10.00% 50V
C012 1-126-963-11 ELECT 4.7UF 20.00% 50V
< SWITCH > C013 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25V
C014 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25V
S2601 £ 1-571-433-21 SWITCH, PUSH (AC POWER)
*A-1624-100-A F3 Board, Complete C016 1-216-295-91 SHORT 0
*4-374-846-01 COVER, CAPACITOR, CAP TYPE C019 1-162-919-91 CERAMIC CHIP 22PF 5.00% 50V
< CAPACITOR >
C3601 1-113-924-11 CERAMIC 0.0047UF 20.00% 250V C022 1-126-935-11 ELECT 470UF 20.00% 10V
C3602 1-136-212-12 FILM 0.1UF 20.00% 300V C025 1-126-935-11 ELECT 470UF 20.00% 16V
< CONNECTOR > C027 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
CN3601 1-580-843-11 PIN, CONNECTOR (POWER) C028 1-163-009-91 CERAMIC CHIP 0.001UF 10.00% 50V
CN3602 1-695-915-11 TAB (CONTACT) C030 1-163-009-91 CERAMIC CHIP 0.001UF 10.00% 50V
CN3603 1-580-843-11 PIN, CONNECTOR (POWER) C033 1-163-009-91 CERAMIC CHIP 0.001UF 10.00% 50V
51
A
C035 1-163-009-91 CERAMIC CHIP 0.001UF 10.00% 50V C407 1-164-346-11 CERAMIC CHIP 1UF 16V
C036 1-163-009-91 CERAMIC CHIP 0.001UF 10.00% 50V C408 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C037 1-136-244-11 FILM 0.1UF 2.00% 50V C409 1-126-964-11 ELECT 10UF 20.00% 50V
C038 1-163-038-91 CERAMIC CHIP 0.1UF 25V C410 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25V
C039 1-164-505-11 CERAMIC CHIP 2.2UF 16V C411 1-163-009-91 CERAMIC CHIP 0.001UF 10.00% 50V
C044 1-164-346-11 CERAMIC CHIP 1UF 16V C416 1-126-964-11 ELECT 10UF 20.00% 50V
C045 1-164-489-11 CERAMIC CHIP 0.22UF 10.00% 16V C417 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25V
C047 1-126-935-11 ELECT 470UF 20.00% 16V C419 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50V
C053 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V C423 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C112 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25V C430 1-102-114-00 CERAMIC 470PF 10.00% 50V
C211 1-162-970-91 CERAMIC CHIP 10000PF 10.00% 25V C436 1-163-017-00 CERAMIC CHIP 0.0047UF 10.00% 50V
C213 1-163-249-11 CERAMIC CHIP 82PF 5.00% 50V C437 1-164-346-11 CERAMIC CHIP 1UF 16V
C214 1-163-139-00 CERAMIC CHIP 820PF 5.00% 50V C438 1-164-346-11 CERAMIC CHIP 1UF 16V
C215 1-163-084-00 CERAMIC CHIP 1.5PF 0.25PF 50V C445 1-126-964-11 ELECT 10UF 20.00% 50V
C216 1-163-117-00 CERAMIC CHIP 100PF 5.00% 50V C446 1-126-964-11 ELECT 10UF 20.00% 50V
C217 1-163-084-00 CERAMIC CHIP 1.5PF 0.25PF 50V C447 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25V
C218 1-163-249-11 CERAMIC CHIP 82PF 5.00% 50V C449 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C222 1-163-117-00 CERAMIC CHIP 100PF 5.00% 50V C502 1-163-038-91 CERAMIC CHIP 0.1UF 25V
C223 1-126-965-91 ELECT 22UF 20.00% 50V C503 1-115-832-91 ELECT 100UF 20.00% 50V
C224 1-163-117-91 CERAMIC CHIP 100PF 5.00% 50V C504 1-106-220-00 MYLAR 0.1UF 10.00% 100V
C225 1-126-157-11 ELECT 10UF 20.00% 16V C505 1-137-194-81 FILM 0.47UF 5.00% 50V
C227 1-163-117-91 CERAMIC CHIP 100PF 5.00% 50V C509 1-107-364-11 MYLAR 0.01UF 10.00% 400V
C228 1-126-965-91 ELECT 22UF 20.00% 50V C510 1-163-005-91 CERAMIC CHIP 470PF 10.00% 50V
C229 1-163-017-00 CERAMIC CHIP 0.0047UF 10.00% 50V C513 1-107-662-11 ELECT 22UF 20.00% 250V
C230 1-164-336-11 CERAMIC CHIP 0.33UF 25V C515 1-104-666-11 ELECT 220UF 20.00% 25V
C233 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V C518 1-106-375-12 MYLAR 0.022UF 10.00% 250V
C235 1-164-005-11 CERAMIC CHIP 0.47UF 25V C520 1-163-038-91 CERAMIC CHIP 0.1UF 25V
C237 1-126-965-91 ELECT 22UF 20.00% 50V C525 1-123-024-21 ELECT 33UF 160V
C245 1-163-009-91 CERAMIC CHIP 0.001UF 10.00% 50V C538 1-165-319-11 CERAMIC CHIP 0.1UF 50V
C405 1-163-009-91 CERAMIC CHIP 0.001UF 10.00% 50V C543 1-162-134-11 CERAMIC 470PF 10.00% 2KV
52
B1 A
C546 1-129-723-51 FILM 0.056UF 5.00% 630V C648 1-125-782-91 CERAMIC 4700PF 10.00% 1KV
C547 1-109-844-11 FILM 0.68UF 5.00% 250V C649 1-163-038-91 CERAMIC CHIP 0.1UF 25V
C548 1-162-134-11 CERAMIC 470PF 10.00% 2KV C657 1-126-952-11 ELECT 1000UF 20.00% 35V
C552 1-102-212-00 CERAMIC 820PF 10.00% 500V C1202 1-126-959-91 ELECT 0.47UF 20.00% 50V
C553 1-137-417-11 MYLAR 0.0047UF 10.00% 200V C1203 1-535-143-61 LEAD JUMPER (5.0MM)
C580 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25V C1207 1-126-960-11 ELECT 1UF 20.00% 50V
C583 1-163-009-91 CERAMIC CHIP 0.001UF 10.00% 50V C1209 1-163-033-91 CERAMIC CHIP 0.022UF 50V
C600 1-119-888-51 CERAMIC 2200PF 20.00% 250V C1210 1-126-960-11 ELECT 1UF 20.00% 50V
C601 £ 1-136-516-12 FILM 0.1UF 20.00% 300V C1211 1-163-033-91 CERAMIC CHIP 0.022UF 50V
C602 £ 1-136-516-12 FILM 0.1UF 20.00% 300V C1213 1-164-346-91 CERAMIC CHIP 1UF 16V
C603 £ 1-119-899-51 CERAMIC 1000PF 10.00% 250V C1215 1-126-952-11 ELECT 1000UF 20.00% 35V
C604 £ 1-119-899-51 CERAMIC 1000PF 10.00% 250V C1218 1-109-982-11 CERAMIC CHIP 1UF 10.00% 10V
C606 1-117-751-11 ELECT(BLOCK) 220UF 20.00% 450V C1221 1-115-339-11 CERAMIC CHIP 0.1UF 10.00% 50V
C608 1-126-963-11 ELECT 4.7UF 20.00% 50V C1229 1-163-001-11 CERAMIC CHIP 220PF 10.00% 50V
C610 1-126-941-11 ELECT 470UF 20.00% 25V C1230 1-163-001-11 CERAMIC CHIP 220PF 10.00% 50V
C611 1-163-009-91 CERAMIC CHIP 0.001UF 10.00% 50V C1231 1-163-001-11 CERAMIC CHIP 220PF 10.00% 50V
C612 1-104-571-91 CERAMIC 0.0015UF 10.00% 2KV C1232 1-115-339-11 CERAMIC CHIP 0.1UF 10.00% 50V
C613 1-104-571-91 CERAMIC 0.0015UF 10.00% 2KV C1235 1-126-960-11 ELECT 1UF 20.00% 50V
C614 1-161-964-51 CERAMIC 0.0047UF 250V C1236 1-126-960-11 ELECT 1UF 20.00% 50V
< CONNECTOR >
C616 1-165-127-11 CERAMIC 470PF 10.00% 500V
C617 1-165-127-11 CERAMIC 470PF 10.00% 500V CN001 *1-564-508-11 PLUG, CONNECTOR 5P
C618 1-126-949-11 ELECT 220UF 20.00% 35V CN003 1-564-510-51 PLUG, CONNECTOR 7P
C620 1-137-990-21 FILM 33000PF 3% 800V CN405 *1-564-510-11 PLUG, CONNECTOR 7P
C622 1-104-571-91 CERAMIC 0.0015UF 10.00% 2KV CN406 *1-564-512-11 PLUG, CONNECTOR 9P
CN501 1-580-798-11 CONNECTOR PIN (DY)
C623 1-104-571-91 CERAMIC 0.0015UF 10.00% 2KV
C624 1-126-935-11 ELECT 470UF 20.00% 16V CN503 *1-564-506-11 PLUG, CONNECTOR 3P
C626 1-126-967-11 ELECT 47UF 20.00% 50V CN506 1-695-915-11 TAB (CONTACT)
C628 1-126-963-11 ELECT 4.7UF 20.00% 50V CN509 1-695-915-11 TAB (CONTACT)
CN510 1-691-771-11 PLUG (MICRO CONNECTOR) 9P
C629 1-165-127-11 CERAMIC 470PF 10.00% 500V
C630 1-107-641-11 ELECT 220UF 20.00% 160V CN512 *1-770-723-11 CONNECTOR, BOARD TO BOARD 8P
C631 1-126-942-61 ELECT 1000UF 20.00% 25V CN602 1-508-765-00 PIN, CONNECTOR (5MM PITCH) 3P
C632 1-126-964-11 ELECT 10UF 20.00% 50V CN603 *1-508-786-00 PIN, CONNECTOR (5MM PITCH) 2P
C633 1-163-009-91 CERAMIC CHIP 0.001UF 10.00% 50V CN605 *1-691-960-11 PIN, CONNECTOR (PC BOARD) 3P
CN606 *1-695-292-11 PIN, CONNECTOR (POWER)
C634 1-128-562-11 ELECT 47UF 20.00% 100V
C635 1-136-165-00 FILM 0.1UF 5.00% 50V CN1200 *1-564-509-11 PLUG, CONNECTOR 6P
C636 1-136-479-11 FILM 0.001UF 2.00% 50V CN1201 *1-564-507-11 PLUG, CONNECTOR 4P
C638 1-107-679-91 ELECT 10UF 20.00% 450V
< DIODE >
C639 1-104-665-11 ELECT 100UF 20.00% 25V
C640 1-104-664-11 ELECT 47UF 20.00% 25V D001 8-719-069-55 DIODE UDZSTE-175.6B
C641 1-115-785-11 ELECT 470UF 20.00% 16V D002 8-719-069-55 DIODE UDZSTE-175.6B
C642 1-104-665-11 ELECT 100UF 20.00% 25V D003 8-719-109-69 DIODE RD3.6ES-B2
C643 1-165-127-11 CERAMIC 470PF 10.00% 500V D005 8-719-929-15 DIODE HZS9.1NB2
53
A F4 A
D006 8-719-109-89 DIODE RD5.6ES-B2 D427 8-719-082-01 DIODE MM3Z12VT1
D007 8-719-069-55 DIODE UDZSTE-175.6B D428 8-719-069-57 DIODE UDZSTE-176.8B
D008 8-719-074-43 DIODE BAS316-115 D429 8-719-069-57 DIODE UDZSTE-176.8B
D012 8-719-929-15 DIODE HZS9.1NB2 D501 8-719-979-85 DIODE EGP20G

D013 8-719-109-69 DIODE RD3.6ES-B2 D502 8-719-081-90 DIODE PDZ22B-115
D014 1-216-295-91 SHORT 0 D503 8-719-069-55 DIODE UDZSTE-175.6B
D016 8-719-109-89 DIODE RD5.6ES-B2 D504 8-719-074-43 DIODE BAS316-115
D018 8-719-109-69 DIODE RD3.6ES-B2 D506 8-719-908-03 DIODE GP08D
D019 8-719-978-33 DIODE DTZ-TT11-6.8B D512 8-719-302-43 DIODE EL1Z

D021 8-719-978-33 DIODE DTZ-TT11-6.8B D513 8-719-979-85 DIODE EGP20G
D022 8-719-069-55 DIODE UDZSTE-175.6B D514 8-719-979-85 DIODE EGP20G
D035 8-719-069-55 DIODE UDZSTE-175.6B D534 8-719-302-43 DIODE ELIZ
D036 8-719-069-55 DIODE UDZSTE-175.6B D535 8-719-908-03 DIODE GP08D
D051 8-719-081-98 DIODE MM3Z6V8T1 D536 8-719-945-80 DIODE ERC06-15S

D101 8-719-977-81 DIODE DTZ33B D537 8-719-070-62 DIODE PDZ9.1B-115
D103 8-719-081-98 DIODE MM3Z6V8T1 D538 8-719-908-03 DIODE GP08D
D104 8-719-069-55 DIODE UDZSTE-175.6B D539 8-719-312-10 DIODE RU4AM-T3
D105 8-719-069-55 DIODE UDZSTE-175.6B D541 1-216-295-91 SHORT 0
D106 8-719-069-55 DIODE UDZSTE-175.6B D573 8-719-082-00 DIODE MM3Z4V7T1

D107 8-719-069-55 DIODE UDZSTE-175.6B D601 8-719-510-53 DIODE D4SB60L
D203 8-719-069-55 DIODE UDZSTE-175.6B D602 8-719-911-19 DIODE 1SS119-25
D207 8-719-069-60 DIODE UDZSTE-179.1B D604 8-719-083-94 DIODE FUF4005
D210 8-719-069-55 DIODE UDZSTE-175.6B D608 8-719-063-70 DIODE D1NL20U
D211 8-719-069-60 DIODE UDZSTE-179.1B D610 8-719-110-41 DIODE RD15ES-B2

D212 8-719-914-43 DIODE DAN202K D611 8-719-991-33 DIODE 1SS133T-77
D228 8-719-069-55 DIODE UDZSTE-175.6B D612 8-719-991-33 DIODE 1SS133T-77
D235 8-719-069-55 DIODE UDZSTE-175.6B D613 8-719-911-19 DIODE 1SS119-25
D236 8-719-069-60 DIODE UDZSTE-179.1B D614 8-719-077-76 DIODE D2SB60A-F04
D401 8-719-069-57 DIODE UDZSTE-176.8B D615 8-719-929-15 DIODE HZS9.1NB2

D402 8-719-081-98 DIODE MM3Z6V8T1 D618 8-719-022-97 DIODE D2S4MF
D403 8-719-978-33 DIODE DTZ-TT11-6.8B D619 8-719-022-97 DIODE D2S4MF
D404 8-719-109-89 DIODE RD5.6ESB2 D620 8-719-109-85 DIODE RD5.1ESB2
D405 8-719-081-98 DIODE MM3Z6V8T1 D621 8-719-109-89 DIODE RD5.6ESB2
D406 8-719-081-98 DIODE MM3Z6V8T1 D623 8-719-911-19 DIODE 1SS119-25

D407 8-719-081-98 DIODE MM3Z6V8T1 D624 8-719-052-90 DIODE D1NL40-TA2
D408 8-719-069-57 DIODE UDZSTE-176.8B D625 8-719-062-39 DIODE D4SBL20UF1
D410 8-719-069-57 DIODE UDZSTE-176.8B D627 8-719-063-70 DIODE D1NL20U
D411 8-719-069-57 DIODE UDZSTE-176.8B D628 8-719-083-49 DIODE P6KE200ASY
D412 8-719-081-98 DIODE MM3Z6V8T1 D629 8-719-083-94 DIODE FUF4005

D413 8-719-069-57 DIODE UDZSTE-176.8B D631 8-719-921-63 DIODE MTZJ-7.5B
D414 8-719-081-98 DIODE MM3Z6V8T1 D632 8-719-063-70 DIODE D1NL20U
D418 8-719-069-60 DIODE UDZSTE-179.1B D633 8-719-109-69 DIODE RD3.6ES-B2
D419 8-719-049-26 DIODE RB721Q D638 8-719-083-92 DIODE YG802C09RF122
D420 8-719-081-98 DIODE MM3Z6V8T1 D640 8-719-921-63 DIODE MTZJ-7.5B

D421 8-719-049-26 DIODE RB721Q D1203 8-719-914-43 DIODE DAN202K
D422 8-719-069-57 DIODE UDZSTE-176.8B D1204 8-719-069-55 DIODE UDZSTE-175.6B
D423 8-719-081-98 DIODE MM3Z6V8T1 D1205 8-719-081-90 DIODE PDZ22B-115
D424 8-719-069-60 DIODE UDZSTE-179.1B D1230 8-719-074-43 DIODE BAS316-115
54
A
< FERRITE BEAD > L403 1-410-993-42 INDUCTOR 1UH
L404 1-410-993-42 INDUCTOR 1UH
FB601 1-410-397-21 FERRITE 1.1UH L405 1-535-143-61 LEAD, JUMPER (5.0MM)
FB602 1-410-397-21 FERRITE 1.1UH L406 1-535-143-61 LEAD, JUMPER (5.0MM)
FB603 1-412-911-21 FERRITE 0UH L410 1-216-025-11 RES-CHIP 100 5% 1/10W
FB604 1-410-397-21 FERRITE 1.1UH
FB605 1-410-397-21 FERRITE 1.1UH L430 1-412-002-31 INDUCTOR 4.7UH
L446 1-216-295-91 SHORT 0
FB606 1-412-911-21 FERRITE 0UH L448 1-216-295-91 SHORT 0
FB607 1-412-911-21 FERRITE 0UH L501 1-414-187-11 INDUCTOR 47UH
L502 1-412-529-11 INDUCTOR 22UH
< FILTER >
L503 1-412-521-31 INDUCTOR 4.7UH
FL201 1-239-803-11 FILTER, EMI L504 1-535-143-61 LEAD, JUMPER (5.0MM)
L505 1-412-542-41 INDUCTOR 270UH
< IC > L507 1-412-533-21 INDUCTOR 47UH
L532 1-412-553-11 INDUCTOR 3.3MH
IC001 6-800-338-01 IC TDA9394H/N1/4/0334
IC004 8-759-575-72 IC M24C08-WMN6T L533 1-406-989-21 INDUCTOR 10MH
IC201 6-700-411-01 IC MSP3411G-PP-B8 L534 1-216-025-11 RES-CHIP 100 5% 1/10W
IC401 8-759-665-11 IC LM393DT L535 1-459-111-00 INDUCTOR 10MH
IC501 8-759-192-71 IC STV9379 L601 1-408-603-31 INDUCTOR 10UH
L602 1-408-611-31 INDUCTOR 47UH
IC531 8-759-665-11 IC LM393DT
IC601 8-759-670-30 IC MCZ3001D L603 1-412-523-41 INDUCTOR 6.8UH
IC602 8-749-016-19 IC SE135N-LF4 L1201 1-535-143-61 LEAD, JUMPER (5.0MM)
IC604 8-759-668-87 IC BA41W12ST-V5 L1203 1-535-143-61 LEAD, JUMPER (5.0MM)
IC608 8-759-591-02 IC L78L33ABZ-AP
< PHOTO COUPLER >
IC609 8-759-468-89 IC TOP209P
IC1201 8-759-831-56 IC TDA7497 PH601 £ 8-749-016-21 IC TCET1103G
< JACK > < IC LINK >
J401 1-766-296-21 CONNECTOR, DUAL SCART PS1201 1-533-597-31 LINK, IC

J402 1-770-329-11 JACK, PIN 3P
J404 1-784-632-11 JACK, PIN 2P < TRANSISTOR >
< COIL > Q002 8-729-027-56 TRANSISTOR DTC143TKA-T146

Q013 8-729-120-28 TRANSISTOR 2SC1623-L5L6
L001 1-408-611-31 INDUCTOR 47UH Q014 8-729-120-28 TRANSISTOR 2SC1623-L5L6
L006 1-408-611-31 INDUCTOR 47UH
L027 1-216-295-91 SHORT 0 Q203 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q212 8-729-422-33 TRANSISTOR 2SD601A-Q-TX
L101 1-412-534-41 INDUCTOR 56UH Q401 8-729-026-49 TRANSISTOR 2SA1037AK-T146
L103 1-412-002-31 INDUCTOR 4.7UH Q411 8-729-120-28 TRANSISTOR 2SC1623-L5L6
L104 1-412-002-31 INDUCTOR 4.7UH
L201 1-408-602-31 INDUCTOR 8.2UH Q532 8-729-053-33 TRANSISTOR IRF614-037
Q533 8-729-049-08 TRANSISTOR BU2515DX-127
L202 1-408-591-11 INDUCTOR 1UH Q535 8-729-053-33 TRANSISTOR IRF614-037
L203 1-408-602-31 INDUCTOR 8.2UH Q576 8-729-422-33 TRANSISTOR 2SD601A-Q-TX
L205 1-408-591-21 INDUCTOR 1UH Q601 8-729-026-49 TRANSISTOR 2SA1037AK-T146
L206 1-535-143-61 LEAD, JUMPER (5.0MM)
L207 1-408-591-21 INDUCTOR 1UH 602 8-729-119-78 TRANSISTOR 2SC2785-HFE
Q603 8-729-029-56 TRANSISTOR DTA144ESA
L401 1-410-993-42 INDUCTOR 1UH Q604 8-729-030-02 TRANSISTOR DTC144ESA
55
A
Q606 8-729-053-36 TRANSISTOR 2SK2640-01MR R028 1-216-025-11 RES-CHIP 100 5% 1/10W
Q607 8-729-053-36 TRANSISTOR 2SK2640-01MR R029 1-216-061-91 RES-CHIP 3.3K 5% 1/10W
Q609 8-729-026-49 TRANSISTOR 2SA1037AK-T146 R030 1-216-821-11 RES-CHIP 1K 5% 1/16W
Q1210 8-729-120-28 TRANSISTOR 2SC1623-L5L6 R031 1-216-061-91 RES-CHIP 3.3K 5% 1/10W
R032 1-216-061-91 RES-CHIP 3.3K 5% 1/10W
Q1211 8-729-120-28 TRANSISTOR 2SC1623-L5L6 R033 1-216-073-91 RES-CHIP 10K 5% 1/10W
Q1230 8-729-027-56 TRANSISTOR DTC143TKA-T146 R034 1-216-129-00 RES-CHIP 2.2M 5% 1/10W
Q1231 8-729-027-56 TRANSISTOR DTC143TKA-T146
R039 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
< RESISTOR > R040 1-216-033-00 RES-CHIP 220 5% 1/10W
R041 1-216-025-11 RES-CHIP 100 5% 1/10W
JR3 1-216-296-11 SHORT 0
JR5 1-216-295-91 SHORT 0 R042 1-216-025-11 RES-CHIP 100 5% 1/10W
JR9 1-216-295-91 SHORT 0 R044 1-216-073-91 RES-CHIP 10K 5% 1/10W
JR16 1-216-296-11 SHORT 0 R045 1-216-129-00 RES-CHIP 2.2M 5% 1/10W
R047 1-216-025-11 RES-CHIP 100 5% 1/10W
JR21 1-216-818-91 RES-CHIP 560 5% 1/16W
JR210 1-216-295-91 SHORT 0 R051 1-216-295-91 SHORT 0
R052 1-216-295-91 SHORT 0
JR211 1-216-296-11 SHORT 0
R070 1-216-025-11 RES-CHIP 100 5% 1/10W
JR505 1-216-295-91 SHORT 0
R001 1-216-295-91 SHORT 0 R072 1-216-295-91 SHORT 0
R003 1-216-065-91 RES-CHIP 4.7K 5% 1/10W R073 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
R004 1-216-033-00 RES-CHIP 220 5% 1/10W R074 1-216-073-91 RES-CHIP 10K 5% 1/10W
R090 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
R005 1-216-041-00 RES-CHIP 470 5% 1/10W
R008 1-216-025-11 RES-CHIP 100 5% 1/10W R094 1-216-025-11 RES-CHIP 100 5% 1/10W
R009 1-216-049-11 RES-CHIP 1K 5% 1/10W R095 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
R096 1-216-073-91 RES-CHIP 10K 5% 1/10W
R010 1-216-049-11 RES-CHIP 1K 5% 1/10W
R011 1-216-295-91 SHORT 0 R101 1-216-093-91 RES-CHIP 68K 5% 1/10W
R012 1-216-121-11 RES-CHIP 1M 5% 1/10W R102 1-216-097-11 RES-CHIP 100K 5% 1/10W
R015 1-216-198-91 RES-CHIP 1K 5% 1/8W R104 1-216-295-91 SHORT 0
R017 1-216-025-11 RES-CHIP 100 5% 1/10W R105 1-414-813-21 INDUCTOR 0UH
R018 1-208-820-11 METAL CHIP 39K 0.5% 1/10W
R020 1-216-077-91 RES-CHIP 15K 5% 1/10W R106 1-215-900-11 METAL OXIDE 22K 5% 2W
R022 1-216-089-91 RES-CHIP 47K 5% 1/10W R107 1-216-025-11 RES-CHIP 100 5% 1/10W
R202 1-216-073-91 RES-CHIP 10K 5% 1/10W
R025 1-216-025-11 RES-CHIP 100 5% 1/10W
56
A
R212 1-216-069-00 RES-CHIP 6.8K 5% 1/10W R429 1-216-089-91 RES-CHIP 47K 5% 1/10W
R213 1-216-081-00 RES-CHIP 22K 5% 1/10W R430 1-216-073-91 RES-CHIP 10K 5% 1/10W

R235 1-216-295-91 SHORT 0 R443 1-216-073-91 RES-CHIP 10K 5% 1/10W
R236 1-216-295-91 SHORT 0 R444 1-216-061-91 RES-CHIP 3.3K 5% 1/10W
R246 1-260-107-11 CARBON 4.7K 5% 1/2W R447 1-216-295-91 SHORT 0
R248 1-249-429-11 CARBON 10K 5% 1/4W R448 1-216-113-00 RES-CHIP 470K 5% 1/10W
R250 1-216-230-00 RES-CHIP 22K 5% 1/8W R450 1-216-041-00 RES-CHIP 470 5% 1/10W
R251 1-216-069-00 RES-CHIP 6.8K 5% 1/10W R451 1-216-041-00 RES-CHIP 470 5% 1/10W
R252 1-216-069-00 RES-CHIP 6.8K 5% 1/10W R453 1-216-171-00 RES-CHIP 75 5% 1/8W

R401 1-410-993-42 INDUCTOR 1UH R461 1-216-022-00 RES-CHIP 75 5% 1/10W
R406 1-216-296-11 SHORT 0 R503 1-215-888-00 METAL OXIDE 220 5% 2W
R407 1-216-022-00 RES-CHIP 75 5% 1/10W R504 1-249-385-11 CARBON 2.2 5% 1/4W
R408 1-216-022-00 RES-CHIP 75 5% 1/10W R505 1-216-671-11 METAL CHIP 6.8K 0.5% 1/10W
R410 1-216-025-11 RES-CHIP 100 5% 1/10W R507 1-216-349-00 METAL OXIDE 1 5% 1W

R417 1-216-113-00 RES-CHIP 470K 5% 1/10W R516 1-214-905-11 METAL 47K 1% 1/2W
R418 1-216-113-00 RES-CHIP 470K 5% 1/10W R520 1-215-884-11 METAL OXIDE 47 5% 2W

R420 1-216-073-91 RES-CHIP 10K 5% 1/10W R523 1-216-121-11 RES-CHIP 1M 5% 1/10W
57
A
R538 1-535-143-71 LEAD, JUMPER (7.5MM) R647 1-216-049-11 RES-CHIP 1K 5% 1/10W
R539 1-215-892-81 METAL OXIDE 1K 5% 2W R648 1-215-481-00 METAL 330K 1% 1/4W
R540 1-212-970-00 FUSIBLE 33 5% 1/2W R649 1-208-805-11 METAL CHIP 9.1K 0.5% 1/10W
R543 1-216-065-91 RES-CHIP 4.7K 5% 1/10W R650 1-208-758-11 METAL CHIP 100 0.5% 1/10W
R547 1-535-143-71 LEAD, JUMPER (7.5MM) R651 1-220-926-11 FUSIBLE 0.47 10% 1/2W
R548 1-249-387-11 CARBON 3.3 5% 1/4W R652 1-216-081-00 RES-CHIP 22K 5% 1/10W
R549 1-535-143-71 LEAD, JUMPER (7.5MM) R653 1-216-073-91 RES-CHIP 10K 5% 1/10W
R551 1-215-873-00 METAL OXIDE 4.7K 5% 1W R654 1-216-001-00 RES-CHIP 10 5% 1/10W
R552 1-216-848-91 RES-CHIP 180K 5% 1/16W R656 1-216-365-00 METAL OXIDE 0.47 5% 2W
R553 1-249-381-11 CARBON 1 5% 1/4W R658 1-202-968-11 CEMENTED 1.2 5% 10W
R555 1-216-059-00 RES-CHIP 2.7K 5% 1/10W R660 1-247-807-31 CARBON 100 5% 1/4W
R556 1-215-916-00 METAL OXIDE 680 5% 3W R1202 1-216-073-91 RES-CHIP 10K 5% 1/10W
R591 1-215-892-11 METAL OXIDE 1K 5% 2W R1210 1-216-077-91 RES-CHIP 15K 5% 1/10W
R602 1-202-968-11 CEMENTED 1.2 5% 10W R1211 1-216-049-11 RES-CHIP 1K 5% 1/10W
R603 1-202-933-61 FUSIBLE 0.1 10% 1/2W R1212 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
R609 1-216-677-11 METAL CHIP 12K 0.5% 1/10W R1215 1-216-049-11 RES-CHIP 1K 5% 1/10W
R610 1-215-481-00 METAL 330K 1% 1/4W R1216 1-216-025-11 RES-CHIP 100 5% 1/10W
R611 1-216-059-00 RES-CHIP 2.7K 5% 1/10W R1217 1-216-341-11 METAL OXIDE 0.22 5% 1W
R612 1-249-429-11 CARBON 10K 5% 1/4W R1230 1-216-041-00 RES-CHIP 470 5% 1/10W
R613 £ 1-219-720-91 METAL 10M 5% 1W R1231 1-216-113-00 RES-CHIP 470K 5% 1/10W
R615 1-215-385-00 METAL 33 1% 1/4W R1232 1-216-041-00 RES-CHIP 470 5% 1/10W
R618 1-247-889-00 CARBON 270K 5% 1/4W R1233 1-216-113-00 RES-CHIP 470K 5% 1/10W
R622 1-216-073-91 RES-CHIP 10K 5% 1/10W
R623 1-216-081-00 RES-CHIP 22K 5% 1/10W < RELAY >
R624 1-216-001-00 RES-CHIP 10 5% 1/10W
RY601 £ 1-755-388-11 RELAY (AC POWER)
R625 1-216-073-91 RES-CHIP 10K 5% 1/10W
R627 1-249-389-11 CARBON 4.7 5% 1/4W < SWITCH >
R628 1-247-791-91 CARBON 22 5% 1/4W
R629 1-216-073-91 RES-CHIP 10K 5% 1/10W SW532 1-572-707-11 SWITCH, LEVER
R631 1-216-101-91 RES-CHIP 150K 5% 1/10W
< TRANSFORMER >
R632 1-249-417-11 CARBON 1K 5% 1/4W
R633 1-215-481-00 METAL 330K 1% 1/4W T531 1-437-210-11 TRANSFORMER, HORIZONTAL DRIVE
R634 1-217-625-00 METAL 0.05 10% 2W T532 1-426-981-91 TRANSFORMER, FERRITE (PMT)
R635 1-260-300-11 CARBON 4.7 5% 1/2W T602 £ 1-431-732-31 TRANSFORMER, CONVERTER (SRT)
R636 1-249-413-11 CARBON 470 5% 1/4W T603 £ 1-435-976-11 TRANSFORMER, CONVERTER (PIT)
R637 1-216-041-00 RES-CHIP 470 5% 1/10W < THERMISTOR >

R639 1-208-814-91 METAL CHIP 22K 0.5% 1/10W
R640 1-208-830-11 METAL CHIP 100K 0.5% 1/10W TH601 1-803-586-41 THERMISTOR
R641 1-216-097-11 RES-CHIP 100K 5% 1/10W
R642 1-249-405-11 CARBON 100 5% 1/4W THP601 £ 1-803-951-11 THERMISTOR, PTC
58
A C
< CRYSTAL > R053 1-216-095-91 RES-CHIP 82K 5.00% 1/10W
R455 1-412-002-41 INDUCTOR 4.7UH
X001 1-578-774-71 VIBRATOR, CRYSTAL R517 1-215-453-91 METAL 22K 1% 1/4W
X201 1-760-628-11 VIBRATOR, CRYSTAL R518 1-216-069-91 RES-CHIP 6.8K 5% 1/10W
R534 1-216-111-91 RES-CHIP 390K 5% 1/10W
A Board Variant Parts KV-28LS35
R535 1-216-105-91 RES-CHIP 220K 5% 1/10W
< CAPACITOR > R544 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
R546 1-215-917-91 METAL OXIDE 1K 5% 3W
C522 1-137-447-11 MYLAR 0.27UF 5.00% 50V R568 1-216-480-91 METAL OXIDE 820 5% 3W
C536 1-115-521-11 FILM 0.82UF 5.00% 250V R583 1-216-077-91 RES-CHIP 15K 5% 1/10W
C542 1-162-115-51 CERAMIC 330PF 10.00% 2KV
C555 1-117-652-11 FILM 22000PF 3.00% 1.2KV R600 1-216-629-91 RES-CHIP 120 0.50% 1/10W
R601 1-216-647-91 RES-CHIP 680 0.50% 1/10W
< RESISTOR >
< TRANSFORMER >
JR421 1-216-295-91 SHORT 0
T511 £ 1-453-308-31 TRANSFORMER ASSY, FLYBACK (NX4521//Z2B4)
R053 1-216-077-91 RES-CHIP 15K 5% 1/10W T533 1-429-306-11 TRANSFORMER, HORIZONTAL LINEAR
R455 1-216-295-91 SHORT 0
R513 1-216-105-91 RES-CHIP 220K 5% 1/10W < TUNER >
R517 1-215-449-91 METAL 15K 1% 1/4W
R521 1-216-105-91 RES-CHIP 220K 5% 1/10W TU101 1-693-555-11 TUNER STEREO (KV-32LS35B)
1-693-556-11 TUNER STEREO (KV-32LS35E)
R534 1-216-097-91 RES-CHIP 100K 5% 1/10W 1-693-557-11 TUNER STEREO (KV-32LS35U)
R535 1-216-097-91 RES-CHIP 100K 5% 1/10W
R546 1-216-480-11 METAL OXIDE 820 5% 3W *A-1638-156-A C Board, Complete
R568 1-215-916-00 METAL OXIDE 680 5% 3W
R583 1-216-081-91 RES-CHIP 22K 5% 1/10W *1-681-784-11 PWB, C
4-382-854-01 SCREW (M3X8), P, SW (+)
R600 1-216-641-11 METAL CHIP 390 0.5% 1/10W
R601 1-216-643-11 METAL CHIP 470 0.5% 1/10W < CAPACITOR >
< TRANSFORMER > C701 1-136-189-00 MYLAR 0.1UF 10.00% 250V

C702 1-126-964-11 ELECT 10UF 20.00% 50V
T511 £ 1-453-308-41 TRANSFORMER ASSY, FLYBACK (NX4521//Z2B4) C703 1-101-004-00 CERAMIC 0.01UF 50V
T533 1-433-980-12 TRANSFORMER, HORIZONTAL LINEAR C704 1-107-649-11 ELECT 2.2UF 20.00% 250V
C705 1-162-318-11 CERAMIC 0.001UF 10.00% 500V
< TUNER >
C706 1-162-318-11 CERAMIC 0.001UF 10.00% 500V
TU101 8-598-535-00 FRONTEND BTF-EF411 (KV-28LS35B) C708 1-162-114-00 CERAMIC 0.0047UF 2KV
8-598-533-00 FRONTEND BTF-EC411 (KV-28LS35E) C710 1-107-652-11 ELECT 10UF 20.00% 250V
8-598-529-00 FRONTEND BTF-EU611 (KV-28LS35U) C1803 1-101-005-00 CERAMIC 0.022UF 50V
C1804 1-126-964-11 ELECT 10UF 20.00% 50V
A Board Variant Parts KV-32LS35
C1805 1-101-880-00 CERAMIC 47PF 5.00% 50V
< CAPACITOR >
< CONNECTOR >
C536 1-115-522-21 FILM 1UF 5.00% 250V
C540 1-137-051-91 FILM 0.033UF 10.00% 400V CN702 1-695-915-11 TAB (CONTACT)
C542 1-161-754-61 CERAMIC 0.001UF 10.00% 2KV CN703 *1-564-510-11 PLUG, CONNECTOR 7P
C555 1-127-717-11 FILM 19000PF 3.00% 1.2KV CN706 1-695-915-11 TAB (CONTACT)
C619 1-164-644-51 CERAMIC 330PF 10.00% 500V CN707 *1-564-508-11 PLUG, CONNECTOR 5P
CN1801 *1-564-506-11 PLUG, CONNECTOR 3P
C621 1-164-644-51 CERAMIC 330PF 10.00% 500V
< DIODE >
< RESISTOR >
D701 8-719-991-33 DIODE 1SS133T-77
JR101 1-216-295-91 SHORT 0 D702 8-719-901-83 DIODE 1SS83
59
C D3 D2
D703 8-719-901-83 DIODE 1SS83 *A-1640-431-A D3 Board, Complete
D705 8-719-302-43 DIODE ELIZ
D706 8-719-901-83 DIODE 1SS83 < CAPACITOR >
D707 8-719-901-83 DIODE 1SS83
D708 8-719-109-97 DIODE RD6.8ES-B2 C2802 1-126-965-91 ELECT 22UF 20.00% 50V
D709 8-719-109-97 DIODE RD6.8ES-B2 < CONNECTOR >

D710 8-719-109-97 DIODE RD6.8ES-B2
D1801 8-719-110-17 DIODE RD10ESB2 CN2801 *1-564-506-11 PLUG, CONNECTOR 3P
D1802 8-719-110-17 DIODE RD10ESB2 CN2802 *1-785-270-12 PIN, DY CONNECTOR (PC BOARD)
D1803 8-719-110-17 DIODE RD10ESB2 CN2803 *1-580-798-11 CONNECTOR PIN (DY) 6P
< IC > < DIODE >
IC701 8-759-562-43 IC TDA6108JF/N1B D2801 8-719-991-33 DIODE 1SS133T-77

IC1801 8-759-603-37 IC M5216P
< TRANSISTOR >
< SOCKET >
Q2801 8-729-119-78 TRANSISTOR 2SC2785-HFE
J701 £ 1-251-732-11 SOCKET, CRT Q2802 8-729-900-95 TRANSISTOR 2SC1740S-RT
< COIL > < RESISTOR >
L704 1-414-183-41 INDUCTOR 10UH R2801 1-249-421-11 CARBON 2.2K 5% 1/4W

R2802 1-247-839-91 CARBON 2.2K 5% 1/4W
< RESISTOR >
< RELAY >
R701 1-247-903-00 CARBON 1M 5% 1/4W
R702 1-249-429-11 CARBON 10K 5% 1/4W RY2801 1-755-172-11 RELAY
R703 1-247-903-00 CARBON 1M 5% 1/4W
R704 1-535-143-21 LEAD, JUMPER (12.5MM) < TRANSFORMER >
R705 1-215-869-11 METAL OXIDE 1K 5% 1W
T2801 1-411-981-11 INDUCTOR 245UH
R706 1-249-411-11 CARBON 330 5% 1/4W
R712 1-215-869-11 METAL OXIDE 1K 5% 1W *A-1642-285-A D2 Board, Complete (KV-28LS35)
R716 1-249-411-11 CARBON 330 5% 1/4W *A-1642-281-A D2 Board, Complete (KV-32LS35)
R718 1-202-814-11 SOLID 33K 10% 1/2W
R726 1-215-869-11 METAL OXIDE 1K 5% 1W D2 Board, Common Parts
R727 1-249-411-11 CARBON 330 5% 1/4W < CAPACITOR >

R728 1-249-398-11 CARBON 27 5% 1/4W
R741 1-202-549-00 SOLID 100 20% 1/2W C8802 1-136-104-00 FILM 0.16UF 5.00% 200V
R1801 1-249-441-11 CARBON 100K 5% 1/4W C8804 1-136-207-11 MYLAR 0.047UF 10.00% 250V
R1805 1-249-429-11 CARBON 10K 5% 1/4W
< CONNECTOR >
R1806 1-247-899-11 CARBON 680K 5% 1/4W
R1807 1-249-429-11 CARBON 10K 5% 1/4W CN8801 *1-778-770-11 CONNECTOR,BOARD TO BOARD(PLUG)
R1808 1-249-429-11 CARBON 10K 5% 1/4W CN8802 *1-564-506-11 PLUG, CONNECTOR 3P
R1809 1-249-429-11 CARBON 10K 5% 1/4W
R1810 1-249-429-11 CARBON 10K 5% 1/4W
< DIODE >
< VARIABLE RESISTOR >
D8801 8-719-923-60 DIODE MTZJ-T-77-9.1A
RV702 1-241-656-21 RES, ADJ, METAL FILM 110M D8802 8-719-936-85 DIODE RGP10GPKG23
D8803 8-719-921-39 DIODE MTZJ4.7B
plete
< IC >
IC8801 8-749-010-64 PHOTO COUPLER PC123F2
60
D2 VM
< COIL >
C1845 1-129-725-00 FILM 0.082UF 5.00% 400V
L8802 1-406-978-21 COIL CHOKE 150UH C1901 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50V
C1902 1-137-374-11 MYLAR 0.047UF 5.00% 50V
< TRANSISTOR > C1903 1-126-964-11 ELECT 10UF 20.00% 50V
C1904 1-137-366-11 MYLAR 0.0022UF 5.00% 50V
Q8801 8-729-034-09 TRANSISTOR 2SK2518-01MR
Q8802 8-729-027-59 TRANSISTOR DTC144EKA-T146 C1905 1-137-374-11 MYLAR 0.047UF 5.00% 50V
Q8803 8-729-027-59 TRANSISTOR DTC144EKA-T146 C1906 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25V
C1913 1-129-898-91 FILM 0.0022UF 5.00% 630V
< RESISTOR > C1915 1-136-205-11 MYLAR 0.022UF 10.00% 250V
C1916 1-162-962-91 CERAMIC CHIP 470PF 10.00% 50V
JR8801 1-216-864-91 SHORT 0
C1917 1-102-228-00 CERAMIC 470PF 10.00% 500V
R8803 1-249-441-11 CARBON 100K 5% 1/4W C1951 1-126-964-11 ELECT 10UF 20.00% 50V
R8804 1-216-825-91 RES-CHIP 2.2K 5% 1/16W C1952 1-126-964-11 ELECT 10UF 20.00% 50V
R8805 1-216-825-91 RES-CHIP 10K 5% 1/16W C1953 1-137-367-11 MYLAR 0.0033UF 5.00% 50V
R8806 1-216-809-91 RES-CHIP 100 5% 1/16W C1954 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25V
R8812 1-218-879-91 RES-CHIP 22K 0.5% 1/16W
C1957 1-126-964-11 ELECT 10UF 20.00% 50V
D2 Board Variant Parts KV-28LS35 C1958 1-136-169-00 FILM 0.22UF 5.00% 50V
C1959 1-136-169-00 FILM 0.22UF 5.00% 50V
< CAPACITOR >
< CONNECTOR >
C8803 1-115-521-11 FILM 0.82UF 5.00% 250V
D2 Board Variant Parts KV-32LS35 CN1702 *1-564-506-11 PLUG, CONNECTOR 3P
CN1718 *1-770-723-11 CONNECTOR, BOARD TO BOARD 8P
< CAPACITOR > CN1809 1-695-915-11 TAB (CONTACT)
C8803 1-115-356-11 FILM 1.2UF 5.00% 250V < DIODE >
*A-1645-050-A VM Board, Complete (KV-28LS35) D1711 8-719-988-61 DIODE 1SS355TE-17

*A-1645-049-A VM Board, Complete (KV-32LS35) D1719 8-719-991-33 DIODE 1SS133T-77
D1722 8-719-991-33 DIODE 1SS133T-77
VM Board, Common Parts D1733 8-719-921-40 DIODE MTZJ-4.7C
D1734 8-719-921-40 DIODE MTZJ-4.7C
4-352-844-01 PIN, LEAD, COATING
D1840 8-719-302-43 DIODE EL1Z
< CAPACITOR > D1901 8-719-991-33 DIODE 1SS133T-77
D1902 8-719-991-33 DIODE 1SS133T-77
C1701 1-104-665-11 ELECT 100UF 20.00% 25V D1903 8-719-991-33 DIODE 1SS133T-77
C1702 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25V D1904 8-719-991-33 DIODE 1SS133T-77
C1703 1-162-955-11 CERAMIC CHIP 150PF 5.00% 50V
C1704 1-104-665-11 ELECT 100UF 20.00% 25V D1905 8-719-110-41 DIODE RD15ES-B2
C1705 1-162-919-11 CERAMIC CHIP 22PF 5.00% 50V D1906 8-719-970-87 DIODE ERA38-06
D1907 8-719-970-87 DIODE ERA38-06
C1710 1-106-375-12 MYLAR 0.022UF 10.00% 250V D1908 8-719-300-33 DIODE RU-3AM
C1711 1-106-375-12 MYLAR 0.022UF 10.00% 250V D1909 8-719-991-33 DIODE 1SS133T-77
C1713 1-106-375-12 MYLAR 0.022UF 10.00% 250V
C1721 1-107-655-91 ELECT 47UF 20.00% 250V < FERRITE BEAD >
C1722 1-136-153-00 FILM 0.01UF 5.00% 50V
FB1701 1-535-143-61 LEAD, JUMPER (5.0MM)
C1723 1-126-935-11 ELECT 470UF 20.00% 10V
C1728 1-126-935-11 ELECT 470UF 20.00% 10V < IC >
C1733 1-104-664-11 ELECT 47UF 20.00% 25V
C1734 1-104-664-11 ELECT 47UF 20.00% 25V IC1701 8-759-394-36 IC BA09T
C1737 1-104-999-51 FILM 0.1UF 5.00% 200V IC1901 8-759-450-95 IC LM393N
IC1902 8-759-008-70 IC LM358N
C1844 1-129-716-00 FILM 0.015UF 5.00% 630V
61
VM
< COIL > R1734 1-214-809-81 METAL 5.1 1% 1/2W
R1735 1-215-922-11 METAL OXIDE 6.8K 5% 3W
L1701 1-414-183-41 INDUCTOR 10UH R1736 1-215-892-21 METAL OXIDE 1K 5% 2W
L1702 1-412-525-41 INDUCTOR 10UH R1737 1-215-867-00 METAL OXIDE 470 5% 1W
L1703 1-414-184-31 INDUCTOR 15UH
L1843 1-406-989-21 INDUCTOR 10MH R1739 1-535-143-61 LEAD JUMPER (5.00MM)
L1901 1-406-677-21 INDUCTOR 10MMH R1842 1-216-809-11 RES-CHIP 100 5% 1/16W
R1846 1-216-825-11 RES-CHIP 2.2K 5% 1/16W
< TRANSISTOR > R1901 1-216-841-11 RES-CHIP 47K 5% 1/16W
R1903 1-216-833-11 RES-CHIP 10K 5% 1/16W
Q1704 8-729-120-28 TRANSISTOR 2SC1623-L5L6 R1904 1-216-833-11 RES-CHIP 10K 5% 1/16W
Q1705 8-729-119-78 TRANSISTOR 2SC2785-HFE R1905 1-216-845-11 RES-CHIP 100K 5% 1/16W
Q1706 8-729-026-39 TRANSISTOR 2SA933AS-QT R1906 1-216-833-11 RES-CHIP 10K 5% 1/16W
Q1707 8-729-049-09 TRANSISTOR BC327-25 R1907 1-216-845-11 RES-CHIP 100K 5% 1/16W
R1908 1-216-813-11 RES-CHIP 220 5% 1/16W
Q1708 8-729-045-05 TRANSISTOR 2SA2005
Q1709 8-729-119-78 TRANSISTOR 2SC2785-HFE R1909 1-215-489-00 METAL 680K 1% 1/4W
Q1710 8-729-049-10 TRANSISTOR BC337-25 R1910 1-216-864-91 SHORT 0
Q1711 8-729-045-04 TRANSISTOR 2SC5511 R1911 1-216-833-11 RES-CHIP 10K 5% 1/16W
Q1840 8-729-119-76 TRANSISTOR 2SA1175-HFE R1912 1-216-857-11 RES-CHIP 1M 5% 1/16W
R1913 1-216-821-11 RES-CHIP 1K 5% 1/16W
Q1841 8-729-039-68 TRANSISTOR IRF620
Q1903 8-729-043-95 TRANSISTOR 2SC3840(3) R1917 1-216-842-11 RES-CHIP 56K 5% 1/16W
Q1906 8-729-120-28 TRANSISTOR 2SC1623-L5L6 R1918 1-215-921-11 METAL OXIDE 4.7K 5% 3W
R1919 1-218-871-91 RES-CHIP 10K 5% 1/16W
Q1907 8-729-140-97 TRANSISTOR 2SB734-34
R1920 1-216-864-91 SHORT 0
< RESISTOR > R1921 1-215-922-11 METAL OXIDE 6.8K 5% 3W
R1923 1-216-845-11 RES-CHIP 100K 5% 1/16W
JR1702 1-216-814-11 RES-CHIP 270 5% 1/16W R1924 1-216-845-11 RES-CHIP 100K 5% 1/16W
R1925 1-216-845-11 RES-CHIP 100K 5% 1/16W
R1701 1-216-814-11 RES-CHIP 270 5% 1/16W
R1711 1-216-823-11 RES-CHIP 1.5K 5% 1/16W R1956 1-218-463-11 RES-CHIP 8.2M 5% 1/10W
R1957 1-216-833-11 RES-CHIP 10K 5% 1/16W
R1712 1-216-824-11 RES-CHIP 1.8K 5% 1/16W
R1714 1-260-089-11 CARBON 150 5% 1/2W R1959 1-216-828-11 RES-CHIP 3.9K 5% 1/16W
R1720 1-247-863-91 CARBON 22K 5% 1/4W R1964 1-216-809-11 RES-CHIP 100 5% 1/16W
R1965 1-216-817-11 RES-CHIP 470 5% 1/16W
R1721 1-247-863-91 CARBON 22K 5% 1/4W
R1722 1-216-822-11 RES-CHIP 1.2K 5% 1/16W R1967 1-216-483-11 METAL OXIDE 2.7K 5% 3W
R1723 1-249-399-11 CARBON 33 5% 1/4W R1968 1-215-886-11 METAL OXIDE 100 5% 2W
R1724 1-216-830-91 RES-CHIP 5.6K 5% 1/16W R1969 1-216-483-11 METAL OXIDE 2.7K 5% 3W
R1725 1-247-889-91 CARBON 270K 5% 1/4W
< TRANSFORMER >
R1726 1-247-889-91 CARBON 270K 5% 1/4W
R1727 1-216-830-91 RES-CHIP 5.6K 5% 1/16W T1901 1-424-584-11 TRANSFORMER, DYNAMIC FOCUS
R1728 1-249-399-11 CARBON 33 5% 1/4W
R1729 1-249-407-11 CARBON 150 5% 1/4W
R1732 1-249-407-11 CARBON 150 5% 1/4W
R1733 1-214-809-81 METAL 5.1 1% 1/2W
62
VM H2
VM Board Variant Parts KV-28LS35 CN908 1-564-521-11 PLUG, CONNECTOR 6P
< CAPACITOR > < DIODE >
C1848 1-136-347-91 FILM 0.0047UF 5.00% 630V D902 8-719-929-15 DIODE HZS9.1NB2
C1912 1-162-117-00 CERAMIC 100PF 10.00% 500V D903 8-719-929-15 DIODE HZS9.1NB2
C1914 1-102-030-00 CERAMIC 330PF 10.00% 500V D904 8-719-109-97 DIODE RD6.8ES-B2
D905 8-719-109-97 DIODE RD6.8ES-B2
< COIL > D908 8-719-923-60 DIODE MTZJ-T-77-9.1A
L1959 1-406-679-11 INDUCTOR 22MH < JACK >
< RESISTOR > J900 1-750-264-11 JACK

J901 1-779-947-11 TERMINAL BLOCK, S
R1847 1-216-476-11 METAL OXIDE 180 5% 3W
R1848 1-215-911-11 METAL OXIDE 100 5% 3W < COIL >
R1916 1-216-669-11 METAL CHIP 5.6K 0.5% 1/10W
R1922 1-215-919-11 METAL 2.2K 5% 3W L900 1-535-143-61 LEAD, JUMPER (5.0MM)
R1931 1-216-085-91 RES-CHIP 33K 5% 1/10W L901 1-535-143-61 LEAD, JUMPER (5.0MM)
L902 1-408-603-41 INDUCTOR 10UH
R1960 1-216-833-91 RES-CHIP 10K 5% 1/16W L903 1-408-603-41 INDUCTOR 10UH
R1961 1-216-839-91 RES-CHIP 33K 5% 1/16W L904 1-410-119-11 INDUCTOR 1MH
R1966 1-216-454-21 METAL OXIDE 390 5% 2W
< RESISTOR >
VM Board Variant Parts KV-32LS35
R901 1-249-427-11 CARBON 6.8K 5% 1/4W
< CAPACITOR > R902 1-249-429-11 CARBON 10K 5% 1/4W
R903 1-249-406-11 CARBON 120 5% 1/4W
C1848 1-130-338-51 FILM 0.01UF 5.00% 630V R904 1-249-406-11 CARBON 120 5% 1/4W
C1914 1-102-244-91 CERAMIC 220PF 10.00% 500V R909 1-247-895-91 CARBON 470K 5% 1/4W
< COIL > R910 1-247-895-91 CARBON 470K 5% 1/4W

R911 1-249-419-11 CARBON 1.5K 5% 1/4W
L1959 1-406-677-21 INDUCTOR 10MH L912 1-535-143-61 LEAD, JUMPER (5.0MM)
R913 1-247-843-11 CARBON 3.3K 5% 1/4W
< RESISTOR > R914 1-249-431-11 CARBON 15K 5% 1/4W
R1847 1-216-474-21 METAL OXIDE 82 5% 3W R915 1-249-406-11 CARBON 120 5% 1/4W

R1848 1-216-474-21 METAL OXIDE 82 5% 3W R916 1-249-406-11 CARBON 120 5% 1/4W
R1916 1-216-665-91 METAL CHIP 3.9K 0.5% 1/10W R917 1-247-807-31 CARBON 100 5% 1/4W
R1922 1-215-918-00 METAL 1.5K 5% 3W R918 1-247-807-31 CARBON 100 5% 1/4W
R1931 1-216-689-91 RES-CHIP 39K 5% 1/10W
< SWITCH >
R1960 1-216-831-91 RES-CHIP 6.8K 5% 1/16W
R1961 1-216-838-91 RES-CHIP 27K 5% 1/16W S900 1-692-979-11 SWITCH, TACTILE
R1966 1-215-886-21 METAL FILM 100 5% 2W S901 1-692-979-11 SWITCH, TACTILE
S902 1-692-979-11 SWITCH, TACTILE
*A-1646-242-A H2 Board, Complete
< CAPACITOR >
C906 1-126-960-11 ELECT 1UF 20.00% 50V

C907 1-126-960-11 ELECT 1UF 20.00% 50V
C908 1-102-106-91 CERAMIC 100PF 10.00% 50V
C909 1-102-106-91 CERAMIC 100PF 10.00% 50V
< CONNECTOR >
63
MISCELLANEOUS (GERMAN/FRENCH/ITALIAN/DUTCH)
4-206-095-11 INSTRUCTION MANUAL (KV-32LS35E)
£ 1-571-433-21 SWITCH, PUSH (AC POWER) (GERMAN/GREEK)
£ 1-765-286-11 CORD, POWER (KV-28LS35B/28LS35E/ 4-206-095-41 INSTRUCTION MANUAL (KV-32LS35E)
KV-32LS35B/32LS35E) (ITALIAN)
£ 1-776-204-12 CORD, POWER (FILTER) (KV-28LS35U/32LS35U) 4-206-095-51 INSTRUCTION MANUAL (KV-32LS35E)
1-424-733-11 COIL, PFC CHOKE 65MMH (DANISH/SPANISH/NORWEGIAN/PORTUGUESE/
SWEDISH/FINNISH)
£ 1-453-308-41 TRANSFORMER ASSY, FLYBACK (NX4521//Z2B4) 4-206-095-31 INSTRUCTION MANUAL (KV-32LS35U)
(KV-28LS35) (ENGLISH)
£ 1-453-308-31 TRANSFORMER ASSY, FLYBACK (NX4521//Z2B4)
(KV-32LS35) REMOTE COMMANDER
8-598-535-10 FRONTEND BTF-EF411 (KV-28LS35B)
1-476-702-11 REMOTE COMMANDER (RM-932)
8-598-533-00 FRONTEND BTF-EC411 (KV-28LS35E)
8-598-529-00 FRONTEND BTF-EU611 (KV-28LS35U)
1-693-555-11 TUNER STEREO (KV-32LS35B)
1-693-556-11 TUNER STEREO (KV-32LS35E)
1-693-557-11 TUNER STEREO (KV-32LS35U)
1-529-417-11 SPEAKER (8CM)
1-529-408-11 SPEAKER (4.2x24CM)
£ 8-737-786-05 PICTURE TUBE (W66LLX060X) (KV-28LS35)
£ 8-735-054-05 PICTURE TUBE (W76LLZ060X) (KV-32LS35)
8-451-521-11 DEFLECTION YOKE (Y28RVC3-B) (KV-28LS35)
1-451-520-11 DEFLECTION YOKE (Y32RVC3) (KV-32LS35)
1-452-896-11 COIL, NA ROTATION (RT-200)
£ 1-416-466-21 COIL, DEMAGNETIC (KV-28LS35)

£ 1-416-769-11 COIL, DEMAGNETIC (KV-32LS35)
8-453-011-11 NECK ASSY, NA299-M
£ 1-251-537-22 CAP ASSY, HIGH VOLTAGE (KV-28LS35)
£ 1-251-946-11 CAP ASSY, HIGH VOLTAGE (KV-32LS35)
1-452-094-00 MAGNET, ROTATABLE DISK; 15MM

1-452-032-00 MAGNET, DISK; 10MM
ACCESSORIES AND PACKAGING MATERIALS
*4-029-168-01 BAG, PROTECTION

*4-205-939-01 INDIVIDUAL CARTON (KV-28LS35)
*4-205-934-01 INDIVIDUAL CARTON (KV-32LS35)
4-206-161-61 INSTRUCTION MANUAL (KV-28LS35B)
(ENGLISH)
(GERMAN/FRENCH/ITALIAN/DUTCH)

(GERMAN/GREEK)
(ITALIAN)
(DANISH/SPANISH/NORWEGIAN/PORTUGUESE/
SWEDISH/FINNISH)
4-206-161-31 INSTRUCTION MANUAL (KV-28LS35U)
(ENGLISH)
(ENGLISH)
64
A new TV Repair Assistance Tool that combines ease of use and powerful PC software tools to
allow you to save valuable time during many TV repairs.
The TRACE interface connects to the PC's serial port. It provides

connection to the TV's I2C bus and can be provided with an InfraRed
transmitter (optional).
The interface is powered by a standard 9 V PP3 battery for portable
use, and can also be powered by an external 9V/25mA DC power
supply.
The TRACE software that is supplied with the interface allows you to:
• Read, restore and compare NVM contents via the I2C bus
• Acknowledge check of all I2C devices in the TV set
• Read Error Codes (emulation of the Error Reader tool)
With the optional IR Add-on kit, the following features can be added:
• Remote Commander emulation
• User programmable Functional Check through Infrared
• Fast and documented Test Mode setting of all Sony TV chassis
Additional features such as Adjustments and Troubleshooting are
available in chassis-dependent software modules. Please contact your
local Sony Service organisation for the latest information.
Note: For workshops already using the existing I2C Link parallel port interface (9-948-320-30), this software can be used as well, replacing the
TV Data Handling software (9-948-340-50), but Error Reader and IR functions can only be accessed with the TRACE interface.
Partnumbers: TRACE Starter Kit (TRACE interface + software): 9-948-320-70

TRACE Software (for users of the I2C Link interface): 9-948-340-80
TRACE IR Add-on (IR interface + Remote Commander software): 9-948-320-80
PC requirements: IBM-compatible PC with operating system Windows95, Windows98, or WindowsNT*.
* WindowsNT only supported with TRACE interface
English
Sony Corporation 01EP7140-1
Sony UK Printed in U.K.
9-927-406-01 Service Promotions Dept. © 2001.5

Sony kv28ls35 kv32ls35 Chassis Fe-2 (ET)

Uploaded by

Copyright:

Available Formats

Sony kv28ls35 kv32ls35 Chassis Fe-2 (ET)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sony kv28ls35 kv32ls35 Chassis Fe-2 (ET)

Uploaded by

Copyright:

Available Formats

SERVICE MANUAL FE-2 CHASSIS

KV-28LS35B RM-932 FR SCC-Q54L-A KV-32LS35B RM-932 FR SCC-Q54K-A

KV-28LS35E RM-932 ESP SCC-Q53M-A KV-32LS35E RM-932 ESP SCC-Q53L-A

KV-28LS35U RM-932 UK SCC-Q52H-A KV-32LS35U RM-932 UK SCC-Q52G-A

Section Title Page Section Title Page

Specifications .................... 3 4. CIRCUIT ADJUSTMENTS

3. SET-UP ADJUSTMENTS 6-1. Chassis .................... 48

AN ISOLATION TRANSFORMER SHOULD BE USED DURING ATTENTION !!

COMPONENTS IDENTIFIED BY SHADING AND MARKED £ ON

Flat Display FD Trinitron

RM-932 Remote Commander (1)

Design and specifications are subject to change without notice.

WARNING (UK Models only)

The flexible mains lead is supplied connected to a B.S. 1363 fused

When an alternative type of plug is used, it should be fitted with a

Pin No 1 2 4 Signal Signal level

5 _ _ Red input 0.7 +/- 3dB, 75 ohms, positive

1 16 Blanking input High state (1-3V) Low state (0-0.4V)

Connected Not Connected (open) * at 20Hz - 20kHz

Rear Connection Panel Front Connection Panel

p S Video socket pin configuration

Pin Signal Signal Level

Table 1 How to enter into Table 2

Flash Timing Example : e.g. error number 3

E02 OCP (0, 255) 0

channels appear on the screen.

This procedure could take some minutes. Please be

GB 6 After all available broadcast channels are captured Programme Sorting

b) If you wish to store the broadcast channels in a

different order: Programme:

Your TV is now ready for use

First Time Operation 7 8 First Time Operation

OK OK • While watching the TV, you can press the

GB To do this: after selecting the option, press GB

Level 1 Level 2 Level 3 / Function

Live (for live broadcast programmes, DVD

Menu System 9 Menu System 11

Picture Adjustment PICTURE ROTATION Fastext

16 Menu System Teletext 17

continued... For Mono Equipment

18 Additional Information Additional Information 19

2-1. Rear Cover Removal 2-2. Speaker Connector Disconnection

2-3. Chassis Removal and Refitting

When refitting the chassis ensure that the main bracket is

2-6. Service Position 2-7. Side Control Module Removal

Removal of the Anode-Cap

Preparation: Fig. 3-2.

3-1. Beam Landing

Fig. 3-1. Deflection yoke positioning

High voltages are present on the Deflection yoke terminals

• Before starting this adjustment, adjust the focus, horizontal a b

• Input a dot pattern from the pattern generator. a

V.STAT Vertical Static Magnet b

• Tilt the V.STAT magnet and adjust the static convergence by

The movement of the magnets interact with each other and so

1. Remove the deflection yoke spacer.

Screen Corner Convergence

If you are unable to adjust the corner convergence properly,

Install the permalloy assembly a