KV-29FQ65B and Other

SERVICE MANUAL AE-5 CHASSIS
MODEL COMMANDER DEST CHASSIS NO. MODEL COMMANDER DEST CHASSIS NO.
KV-29FQ65B RM-893 French SCC-Q13G-A KV-29FQ65K RM-893 OIRT SCC-Q16K-A
KV-29FQ65E RM-893 ESP SCC-Q14G-A
1
TABLE OF CONTENTS
Section Title Page Section Title Page
Specifications .................... 3 5. DIAGRAMS

Connectors .................... 4 5-1. Block Diagram (1) .................... 31
Self Diagnostic Software .................... 5 Block Diagram (2) .................... 35
1. GENERAL Block Diagram (3) .................... 39
Using the TV menu system .................... 8 Block Diagram (4) .................... 43
Tuning your TV .................... 9 5-2. Circuit Board Location .................... 46
Finding your Video Channel .................... 9 5-3. Schematic Diagrams and
NexT View .................... 11 Printed Wiring Boards .................... 46
Teletext .................... 13 * H5 Board .................... 47
Specifications .................... 14 * F3 Board .................... 48
Troubleshooting .................... 14 * F1 Board .................... 48
* H6 Board .................... 48
2. DISASSEMBLY * E Board .................... 49
2-1. Rear Cover Removal .................... 15 * M1 Board .................... 53
2-2. Speaker Connector .................... 15 * D1 Board .................... 56
2-3. Chassis Removal .................... 15 * D Board .................... 63
2-4. Service Position .................... 16 * A Board .................... 66
2-5. D1 Board Removal .................... 16 * J Board .................... 75
2-6. J Board Removal .................... 16 * C Board .................... 81
2-7. B2 Board Removal .................... 16 * VM Board .................... 83
2-8. Front Control Removal .................... 17 * B2 Board .................... 85
2-9. F3 and H6 Board Removal .................... 17 5-4. Semiconductors .................... 89
2-10. H5 Board Removal .................... 17 5-5. IC Blocks .................... 88
2-11. Service Connector .................... 17
2-12. Picture Tube Removal .................... 18 6. EXPLODED VIEWS
Bottom Plates .................... 19 6-1. Chassis .................... 92
6-2. Picture Tube .................... 93
3. SET-UP ADJUSTMENTS
3-1. Beam Landing .................... 20 7. ELECTRICAL PARTS LIST .................... 95
3-2. Convergence .................... 21
3-3. Focus Adjustment .................... 23
3-4. Screen [G2], White Balance .................... 23
4. CIRCUIT ADJUSTMENTS ATTENTION

4-1. Electrical Adjustments .................... 24
4-2. Volume Electrical Adjustments .................... 28 APRES AVOIR DECONNECTE LE CAP DE’LANODE,
COURT-CIRCUITER L’ANODE DU TUBE CATHODIQUE ET CELUI
4-3. Test Mode 2 .................... 29
DE L’ANODE DU CAP AU CHASSIS METALLIQUE DE L’APPAREIL,
OU AU COUCHE DE CARBONE PEINTE SUR LE TUBE
CAUTION CATHODIQUE OU AU BLINDAGE DU TUBE CATHODIQUE.
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND THE

ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR THE ATTENTION !!
CARBON PAINTED ON THE CRT, AFTER REMOVAL OF THE
ANODE CAP. AFIN D’EVITER TOUT RISQUE D’ELECTROCUTION PROVENANT
D’UN CHÁSSIS SOUS TENTION, UN TRANSFORMATEUR
WARNING !! D’ISOLEMENT DOIT ETRE UTILISÈ LORS DE TOUT DÈPANNAGE
LE CHÁSSIS DE CE RÈCEPTEUR EST DIRECTMENT RACCORDÈ
AN ISOLATION TRANSFORMER SHOULD BE USED DURING ANY Á L’ALIMENTATION SECTEUR.
SERVICE WORK TO AVOID POSSIBLE SHOCK HAZARD DUE TO
LIVE CHASSIS, THE CHASSIS OF THIS RECEIVER IS DIRECTLY
CONNECTED TO THE POWER LINE.
ATTENTION AUX COMPOSANTS RELATIFS Á
LA SECURITÈ!!
SAFETY-RELATED COMPONENT WARNING !!
LES COMPOSANTS IDENTIFIÈS PAR UNE TRAME ET PAR UNE
COMPONENTS IDENTIFIED BY SHADING AND MARKED £ ON MARQUE £ SUR LES SCHÈMAS DE PRINCIPE, LES VUES
THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THE EXPLOSÈES ET LES LISTES DE PIECES SONT D’UNE IMPOR-
PARTS LIST ARE CRITICAL FOR SAFE OPERATION. REPLACE TANCE CRITIQUE POUR LA SÈCURITÈ DU FONCTIONNEMENT,
THESE COMPONENTS WITH SONY PARTS WHOSE PART NE LES REMPLACER QUE PAR DES COMPSANTS SONY DONT LE
NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN NUMÈRO DE PIÈCE EST INDIQUÈ DANS LE PRÈSENT MANUEL
SUPPLEMENTS PUBLISHED BY SONY. OU DANS DES SUPPLÈMENTS PUBLIÈS PAR SONY.
2
ITEM MODEL Television System Stereo System Channel Coverage Color System
PAL, SECAM
GERMAN/NICAM B/G/H VHF : E2-E12 UHF : E21-E69
French B/G/H, D/K,L,I NTSC4.43, NTSC3.58
Stereo DK : R01-R12, R21-R69, S01-S05
(VIDEO IN)
PAL, SECAM
GERMAN /NICAM B/G/H VHF : E2-E12 UHF : E21-E69
Spanish B/G/H, D/K NTSC4.43, NTSC3.58
Stereo DK : R01-R12, R21-R69, S01-S05
(VIDEO IN)
PAL, SECAM
B/G/H VHF : E2-E12 UHF : E21-E69
OIRT B/G/H, D/K GERMAN Stereo NTSC4.43, NTSC3.58
DK : R01-R12, R21-R69, S01-S05
(VIDEO IN)
Model KV-29FQ65B KV-29FQ65E KV-29FQ65K

Power Consumption 158W 158W 158W
FD Trinitron Wide Sound output Right and Left speaker

Approx 72 cm (29 inches) 2x20W (Music Power)
Picture Tube (Approx 68 cm picture measured 2x10W (RMS)
diagonally)
104 degree deflection Subwoofer 1x30W (Music Power) 1x15W (RMS)
Input/Output Terminals [REAR] Power Requirements 220 - 240V
Inputs for Audio and Video signals.
1: 21-pin Euro connector Inputs for RGB.
Dimensions Approx 765x635x570mm
(CENELEC standard) Outputs of TV Video and Audio
signals.
Inputs for S Video.
2: 21-pin Euro connector Weight Approx 59kg
Outputs of TV Video and Audio signals.
(selectable)
Inputs for S Video. RM-893 Remote Commander (1)
3: 21-pin Euro connector Supplied Accessories
Outputs for Video and Audio signals IEC designated R6 battery (2)
(monitor out)
NexTView, Digital Comb Filter, Noise
Phono Jacks Output Connectors variable for Audio Other Features Reduction, DRC 100Hz Picture, DRC
Signals 50Hz Picture, Graphic Equaliser
Input/Output Terminals [FRONT] Remote control system Infrared control
3V dc
Headphone jack stereo mini jack Power requirements 2 batteries IEC designation
R6 (size AA)
Audio inputs phono jacks Dimensions Approx 210x55x23mm (w/h/d)
Video inputs phono jacks Weight Approx 110g (not including battery)
S Video input 4 pin DIN
Design and specifications are subject to change without notice.
Model Name
KV-29FQ65B KV-29FQ65E KV-29FQ65K
Item
Pal Comb ON ON ON
PIP OFF OFF OFF
RGB Priority ON ON ON
Woofer Box ON ON ON
Scar t 1 ON ON ON
Scar t 2 ON ON ON
Front in (3) ON ON ON
Scar t 4 ON ON ON
Projector OFF OF F OFF
AKB in 16:9 mode ON ON ON
Norm B/G ON ON ON
Norm I OFF OFF OFF
Norm D/K ON ON ON
Norm AUS OFF OFF OFF
Norm L OFF OFF OFF
Norm SAT OFF OFF OFF
Norm M OFF OF F OFF
Teletext ON ON ON
Nicam Stereo OFF ON OFF
3
21 pin connector
Pin No 1 2 4 Signal Signal level
1 Audio output B Standard level : 0.5V rms
(right) Output impedence : Less than 1kohm*
Audio output B Standard level : 0.5V rms
2 (right) Output impedence : More than 10kohm*
Audio output A Standard level : 0.5V rms
3 (left) Output impedence : Less than 1kohm*
4 Ground (audio)
5 Ground (blue)
21 6 Audio input A Standard level : 0.5V rms
20 (left) Output impedence : More than 10kohm*
19 7 Blue input 0.7 +/- 3dB, 75 ohms positive
18 High state (9.5-12V) : Part mode
17 8 Function select Low state (0-2V) : TV mode
16 (AV control) Input impedence : More than 10K ohms
Input capacitance : Less than 2nF
15
14 9 Ground (green)
13 10 Open
12 11 Green Green signal : 0.7 +/- 3dB, 75 ohms,
11 positive
10 12 Open
9 13 Ground (red)
8
14 Ground (blanking)
7
6 _ _ Red input 0.7 +/- 3dB, 75 ohms, positive
5 15
4 _ (S signal Chroma 0.3 +/- 3dB, 75 ohms, positive
input)
3
2 16 Blanking input High state (1-3V) Low state (0-0.4V)
(Ys signal) Input impedence : 75 ohms
1
17 Ground (video
output)
18 Ground (video
input)
19 Video output 1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
_ _ Video input 1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
20
_ Video input 1V +/- 3dB, 75ohms, positive sync 0.3V
Y (S signal) (-3+10dB)
21 Common ground
(plug, shield)
Connected Not Connected (open) * at 20Hz - 20kHz
Rear Connection Panel
S Video socket pin configuration

Pin No Signal Signal Level
1 Ground -
2 Ground - S-Video
socket
3 Y (S signal) input 1V +/- 3dB 75ohm, positive Sync. 0.3V -3 +10dB
4 C (S signal) input 0.3V +/- 3dB 75ohm, positive Sync.
4
AE-5 SELF DIAGNOSTIC SOFTWARE
The identification of errors within the AE-5 chassis is triggered in one of two ways :- 1: Busy or 2: Device failure to respond to IIC. In the event of
one of these situations arising the software will first try to release the bus if busy (Failure to do so will report with a continuous flashing LED) and
then communicate with each device in turn to establish if a device is faulty. If a device is found to be faulty the relevant device number will be
displayed through the LED (Series of flashes which must be counted) See table 1., non fatal errors are reported using this method.
Diagnostic Item No of times Standby Probable cause

Detected Symptoms
Description LED Flashes Location
Power does not come on
Power cord is not plugged in.
Power does not turn on Does not light No power is supplied to the TV
Fuse is open circuit.
AC power supply is faulty
H.OUT (Q6803/6804) is shor ted. (D Board) Power does not come on
+B Overcurrent (OCP) 2 times Linearity FET (Q6806) is shor ted. (D Board)
IC6604 Power IC is shor ted. (D Board) Load on power line has shor ted
+15V is not supplied R6835 open (D Board) Ver tical deflection pulse has stopped
Ver tical Deflection stopped 4 times -15V is not supplied R6834 open (D Board)
IC6700 is shor ted (D Board) Power line has shor ted
LED
Error Message
Code
No error 00
Reserved 01
OCP ( Over Current Protection ) 02
OVP ( Over Voltage Protection ) 03
Ver tical Protection 04
Unstable AKB (check star ts after 30's, enable TT61
05
disable TT62)
Horizontal Protection 06
Speaker Protection 07
I2C bus 0 error 08
M-B Tele-Text-Decoder 09
M-B ST24C32, NVM 10
J-B TDA9320, Main Colour Decoder 11
B1/B2-B Feature Box 12
B1-B D/A-Conver ter 13
E-B Backend 14
J-B MSP3410D, Sound Processor 15
J-B CXD2057, Auto Wide 16
External RAM 17
Flash Timing Example : e.g. error number 3
StBy LED
ON ON ON
OFF OFF
5
Error Detection Monitor
Device acknowledge is used to check IIC errors. Device acknowledge is checked by sending an IIC start sequence during CRT power on. Each
device is checked three times, if there is no acknowledge after each attempt, it will be regarded as an error.
There are three steps to check for errors.
1. IIC line 0
If all devices except the NVM have errors, IIC line 0 error is displayed.
2. Board check
If all devices mounted on one board have errors, board error is displayed.
3. Each device check
If IIC line error and board error are not detected then the device with the error is displayed.
The detected errors can be displayed as follows :
1. Error Monitor Menu.

2. Error Reader.
1. Error Monitor Menu
ERROR MONITOR
1. IGNORE ERRORS OFF ON OFF
Operating Time : 000075 h 15 min

Stored Errors :
1. D1 - B CXA1875 or MB88141
2. No Error Occured
3. No Error Occured
4. No Error Occured
5. No Error Occured
Current Error :
Start Error Sequence
Last menu Enter Item
6
2. Error Reader Display
The error reader display is connected to the service connector to read actual error codes. The part number for the error reader display is
S-188-900-10. Once an error has been detected it will then be displayed on the two digit error reader. The errors displayed refer to the following
table.
Error Code Error Message

000h No error occurred
001h Bus error, IIC0
002h Bus error, IIC1
100h A-Board
101h A-B CXA1875, Por t Expander
102h A-B TU1326, Main Tuner
103h A-B TU1350, Sub Tuner
200h B1-Board
201h B1-B P83C654, Feature Box B1-B. SDA9280, D/A Conver tor
202h B1-B P83C654, Feature Box B1-B. SDA9280, D/A Conver tor
300h B2-Board
301h B2-B. SAA4977, BESIC
302h B2-B. SAA495X, Field Memory
400h B3-Board
401h B3-B. MID-X
402h B3-B. Panorama
403h B3-B. DRC
404h BK-B. Picture Booster
500h D1-Board
501h D1-B CXA8070, Dynamic Conver tor
502h D1-B CXA1875, Por t Expander
600h E-Board
601h E-B CXD2100, Backend
700h J-Board
701h J-B CXD2057, Auto Wide
702h J-B SDA9288, PIP
703h J-B Sub Colour Decoder
704h J-B Main Colour Decoder
705h J-B CXA1875, Sub-Sound
706h J-B TDA7309, HP-Amplifier
707h J-B TEA6422DT, Audio Switch
708h J-B MSP3410D, Sound Processor
709h J-B TC9337F, Sound DSP
70Ah J-B CXA21X69, AV Switch
800h M-Board
801h M-B ST24C32, NVM
7
The operating instructions mentioned here are partial abstracts from the ‘Operating
Instruction Manual’. The page numbers of the ‘Operating Instruction Manual’ remain
as in the manual.
Operation Using the TV menu system:
Using the TV menu system Sound Control

Item Effect/Operation Personal
The TV consists of a menu system which is based on a series of user friendly on-screen displays and menus. These displays will Audio Adjustment Vocal
Jazz
help you get the most from your TV, helping you to change picture and sound settings, to alter the size of the TV picture and to Equaliser Mode Rock
Equaliser
rearrange the TV channels etc. Equaliser Mode V Personal Adjustment
Vocal Balance 0
Loudness Off
Jazz Space Off
Adjusting the picture and sound Rock Auto Vol. Control Off
Dual Sound NICAM Stereo
Volume
Pop Dual Sound NICAM Stereo
The picture and sound are preset at the factory. You can however adjust them to suit your own taste. Flat (fixed setting, cannot be adjusted)
v Select Mode : Confirm: OK
1. Press the MENU button on the remote control to display the menu on the TV screen.
2. Press the v or V buttons to select for picture settings or for sound settings then press Equaliser adjustment You can adjust the mode selected in Equaliser mode by
B to enter either the ‘Picture Adjustment’ menu or the ‘Audio Adjustment’ menu. cutting and boosting the 5 selected frequency bands.
3. Press the v or V buttons to select the item on the screen you wish to adjust then press B to Press b or B to select the frequency band then V or v to Equaliser Adjustment
confirm. For a description of the menu items and their effects, see the table below. adjust the frequency. Finally, press the OK button to store (Personal)
4. Press the v, V, B or b buttons to adjust your selected item. the new adjustment. +
5. As soon as you have adjusted the item, press the OK button to store the new setting. 0
6. Repeat steps 3-5 if you wish to adjust any of the other items. If you want to store the new setting, you need to set the Equaliser mode to –
120 150 1,5K 5K 10 K
7. Press the MENU button to remove the menu from the TV screen. ‘Personal’. Personal mode permanently stores the setting, all other modes (Vocal, Sel: Adjust: Confirm:OK
Jazz, Rock, Pop) store only until the next mode change.
Picture Control
Picture Adjustment Balance b More left Balance 0
Picture Mode Personal B More right

Item Effect/Operation Contrast
Brightness
Colour Loudness V Off: Normal Loudness Off
Picture Mode Live (for live broadcasts) On
V Sharpness
Reset v On: For music broadcasts
Personal (for individual settings) AI On
v Movie (for movie broadcasts) Noise Reduction On
Colour Tone Normal Space V Off: Normal Space Off
On
8
v On: Special acoustic effect
Contrast Less b B More Select: Enter:
Brightness* Darker b B Brighter
Auto Vol. Control V Off: Volume level changes according to the broadcast
Colour* Less b B More
Live
signal.
Hue** Reddish b B Greenish Auto Vol. Control Off
Personal v On: Volume level of the channels will stay the same On
Sharpness* Softer b B Sharper Picture Mode Movie
independent of the broadcast signal (eg in the case of
advertisements).
*Only available if ‘Personal’ is selected in ‘Picture Mode’
Contrast
SECTION 1 GENERAL
**Only available for NTSC colour signal (eg. US video tapes)

Dual Sound For a bilingual broadcast: Dual Sound NICAM Mono
Reset Resets picture to the factory preset levels On Stereo
AI Off
V A for channel 1
v B for channel 2
AI V On: Automatic optimization of contrast level
For a stereo broadcast:
(Artificial Intelligence) according to the TV signal. On
Noise Reduction Off V Mono
v Off: Normal.
v Stereo
Noise Reduction V On: Reduces picture noise in case of a weak Warm
Normal When NICAM stereo is being broadcast, the indication NICAM appears briefly on
broadcasting signal. Colour Tone Cool
the screen.
v Off: No noise reduction.
Headphones
Colour Tone V Warm: Gives a warm tint to the picture.
i Volume Adjusts headphone volume.
Normal: Normal. Volume
Can also adjust the volume level of additional equipment
v Cool: Gives a cool tint to the picture.
connected to the RCA sockets on the rear of the TV.
i Dual Sound For a bilingual broadcast:

V A for channel 1 Dual Sound NICAM B
A
v B for channel 2
12 13
Using the TV menu system: Installation
Using the Features menu 6. Tuning your TV

1. Press the MENU button on the remote control to display the menu on the TV screen. Before you tune your TV, you will be asked to set your language and country.
2. Press the v or V buttons to select for the ‘Features’ menu then press B to enter the ‘Features’
menu.
3. Press the v or V buttons to select the desired menu item then press B to confirm. For a description 1. The Language/Country menu appears on the TV screen with the
Features
of the menu items and their effects, see the table below.
Sleep Timer Off word ‘English’ highlighted. Language/Country
4. Press the v, V, B or b buttons to select the desired setting. Parental Lock Off Language Čeština
Country Dansk
AV 2 Output TV Deutsch
5. Press the OK button to confirm your choice of setting. English
Español
2. Press the v or V buttons on the remote control to select your
6. Repeat steps 3-5 if you wish to select any of the other items. Français
chosen language then press the OK button to confirm. The Italiano
7. Press the MENU button to remove the menu from the TV screen.
Select: Enter: country menu appears on screen with the word ‘OFF’ highlighted. Select Language: Confirm:
Select ‘OFF’ if you do not want your channels stored in a given

Item Effect/Operation channel sequence starting from programme position 1. Language/Country
Language English
Country France
Sleep Timer You can select a time after which the TV switches itself into Germany 1 2 3
3. Press v or V to select the country in which you wish to operate Great Britain
standby mode. Greece
Hungary 4 5 6
the TV then press the OK button to confirm your choice. Ireland
V Off Italy
Select Country: Confirm: 7 8 9
Sleep Timer 10 min
4. The ‘autotune’ menu appears on the TV screen in your selected
v 90 min 0
language. Press the OK button to confirm.
Parental Lock V Off: No parental lock.
v On: This feature disables the TV buttons when the set is in standby mode. : :
5. Ensure the aerial is connected as instructed, then press the OK
It is only possible to switch the set back on by pressing a button on button to confirm. The TV starts to automatically search and store
the remote control. all available channels for you. This may take a few minutes -
Parental Look Off
On
please be patient and do not press any buttons.
AV2 Output V TV audio/video signal from the aerial
AV1 audio/video signal from scart 1 : :
6. Once the TV has tuned all available channels the ‘Programme
AV2 audio/video signal from scart 2
9
Sorting’ menu appears on the TV screen enabling you to change
AV3 audio/video signal from scart 3 the order of the channels on your TV. If you wish to change the
AV 2 Output TV
v AV4 audio/video signal from connectors on front of the TV AV 1
AV 2
channel order, press the v or V buttons to select the channel you Programme Sorting
AV 3 want to move, then press B. Press the v or V buttons to select the PROG CH LABEL
AV 4 1 C03 TV 5
2 C05 PRO 7
new programme number position for your selected channel then 3 C07 EU-SP
4 C08 SWF
5 C09 RTL
press the OK button to confirm. The selected channel now moves 6 C11 SAT
7 C12 MDR
8 C13 DDI
9 C14 DSF
to its new programme position and the other channels move 10 C15 RTL 2
11 C16 KAB 1
Changing the screen size accordingly. Repeat this procedure if you wish to sort the order of Select Prog: Confirm:
other channels on your TV.
Programme Sorting
PROG CH LABEL
This feature allows you to change the size of the TV picture. 1 C03 TV 5 C03 TV 5
7. Press the MENU button to remove the menu from the TV screen. 2 C05 PRO 7
3 C07 EU-SP
4 C08 SWF
5 C09 RTL
6 C11 SAT
7 C12 MDR
8 C13 DDI
8. Press the PROGR+/- or the numbered buttons to view the TV 9 C14 DSF
Press the button on the remote control repeatedly or use the v or V buttons to select one of the 10 C15 RTL 2
11 C16 KAB 1
following formats then press the OK button to confirm your selection: 4:3 channels.
Select Position: Move: OK
4:3 conventional 4:3 picture size, full picture information. Note: If you would like to stop the autotune process at any stage,
16:9 for 16:9 broadcasts. press the OK button.
16:9
7. Finding your video channel
If you have connected a VCR to your TV, you now need to find your video channel.
1. Press the PROGR+/- buttons on the TV remote control until your video picture appears on the TV screen.
Note: If you wish to move your video channel to a different programme position, refer to the ‘Re-arranging the TV channels’
section of this instruction manual.
14 5
Using the TV menu system: Using the TV menu system:
Re-arranging the TV channels Naming a channel

After tuning the TV, you can use this feature to change the order of the channels on the TV. Names for channels are usually taken automatically from Teletext if available. You can however name a channel or an input
Set Up
video source using up to five characters (letters or numbers).
1. Press the MENU button on the remote control to display the menu on the TV screen. Auto Tuning
Programme Sorting
AV Preset
Manual Set Up Manual
Manual Set Up
2. Press the V button to select the symbol on the menu screen then press B to enter the ‘Set Up’ Language/Country
Language/Country
Manual
Manual Programme Preset
menu. Select: Enter: Further
Further Programme Preset
2. Press the V button to select the symbol on the menu screen then press B to enter the ‘Set RGB
RGB Set
Set Up
Programme Sorting Picture
Picture Rotation O
3. Press the V button to select ‘Programme Sorting’ then press B to enter the ‘Programme Sorting’ PROG CH LABEL
Up’ menu. Personal
Personal ID - - - -- -- -- --
1 C03 TV 5 Demo
menu. 2 C05 PRO 7
3 C07 EU-SP
4 C08 SWF
5 C09 RTL 3. Press the V button to select ‘Manual Set Up’ then press B to enter the ‘Manual Set Up’
6 C11 SAT Select:
Select: Enter:
Enter:
7 C12 MDR
8 C13 DDI menu.
4. Press the v or V buttons to select the channel you want to move then press B to confirm. 9 C14 DSF
10 C15 RTL 2
11 C16 KAB 1
Select Prog: Confirm:

5. Press the v or V buttons to select the new programme position (eg PROG 4) for your selected 4. Press the V button to select ‘Manual Programme Preset’ then press B to enter the ‘Manual
channel then press the OK button to confirm. The selected channel now moves to its new Programme Sorting Programme Preset’ menu. Manual Programme Preset
PROG CH LABEL PROG SKIP SYS CH LABEL
programme position and the other channels move accordingly. 1 C03 TV 5 C03 TV 5 1 Off B/G C09 ARD
2 C05 PRO 7 2 Off B/G C10 BBC
3 C07 EU-SP
4 C08 SWF
5. Press the v or V buttons to select the channel you wish to name. 3 Off
5 C09 RTL 4 Off
6 C11 SAT 5 Off
6. Repeat steps 4 and 5 if you wish to sort the other channels. 7 C12 MDR 6 Off
8 C13 DDI 7 Off
9 C14 DSF 8 Off
10 C15 RTL 2
11 C16 KAB 1
6. Press the B button repeatedly until the first element of the ‘LABEL’ column is highlighted. 9 Off
10 Off
11 Off
7. Press the MENU button to remove the menu from the TV screen. Select Position: Move: OK
7. Press the v or V buttons to select a letter or number (select ‘-’ for a blank) then press B to Select: Enter:
confirm. Select the other four characters in the same way.
PROG SKIP SYS CH LABEL
Manually tuning the TV 6 Off I C07 T E
8. After selecting all the characters, press the OK button.
You have already tuned the TV automatically using the instructions at the start of this manual. You can however carry out
this operation manually, adding channels to the TV, one at a time. 9. Repeat steps 5 to 8 if you wish to label other channels.
1. Press the MENU button on the remote control to display the menu on the TV screen. 10. Press the MENU button to remove the menu from the TV screen.
Set Up
2. Press the V button to select the symbol on the menu screen then press B to enter the ‘Set Up’ Auto Tuning
Programme Sorting
menu. AV Preset
10
Manual Set Up
Skipping programme positions
3. Press the V button to select ‘Manual Set Up’ on the menu screen then press B to enter the ‘Manual Select: Enter: This function enables you to skip unused programme positions when selecting them with the PROGR+/- buttons.
Set Up’ menu. However, by using the number buttons you can still select the skipped programme position.
Manual Set Up
4. Press the V button to select ‘Manual Programme Preset’ on the menu screen then press B to enter Language/Country
the ‘Manual Programme Preset’ menu. Further Programme Preset
RGB Set Up
Picture Rotation O
Personal ID ------- 1. Press the MENU button on the remote control to display the menu on the TV screen.
5. Press the v or V buttons to select a programme number for your channel (eg PROGR 1 for BBC1) Manual Set Up
then press B to highlight the ‘SKIP’ column. Language/Country

Select: Enter: Manual Programme Preset
2. Press the V button to select the symbol on the menu screen then press B to enter the Further Programme Preset
Manual Programme Preset ‘Set Up’ menu. RGB Set Up
6. Press v to select ‘OFF’ then press B to highlight the ‘SYS’ column. PROG SKIP SYS CH LABEL Picture Rotation O
1 Off B/G C09 TV5 Personal ID -------
2 Off B/G C10 TV
3 Off B/G C21
4 Off B/G C33 3. Press the V button to select ‘Manual Set Up’ then press B to enter the ‘Manual Set Up’
5 Off B/G CXX
6 Off B/G CXX
7. Press the v or V buttons to select the TV broadcast system or ‘EXT’ for a video input source
7 Off B/G CXX menu.
8 Off B/G CXX
(AV1, AV2, ...) then press B to confirm. 9 Off B/G CXX Select: Enter:
10 Off B/G CXX
11 Off B/G CXX
Select: Enter: 4. Press the V button to select ‘Manual Programme Preset’ then press B to enter the ‘Manual
8. Press the v or V buttons to select ‘C’ for terrestrial channels, ‘S’ for cable channels, or ‘F’ for
Programme Preset’ menu.
direct frequency inputs then press B to confirm. PROG SKIP SYS CH LABEL
1 Off B/G Manual Programme Preset
D/K PROG SKIP SYS CH LABEL
IRL 5. Press the v or V buttons to select the programme position then press B to highlight the
9. Select the first number digit of ‘CH’ (channel) then the second number digit of ‘CH’ with the EXT
51 Off I C09 BBC1
52 Off I C10 BBC
‘SKIP’ column. 53 Off
number buttons on the remote control or Press the V button to search for the next available PROG SKIP SYS CH LABEL 54 Off
55 Off
1 Off B/G C 56 Off
channel. S 57 Off
F 58 Off
6. Press the v or V buttons to select ‘Off’ or ‘On’ (if you wish to skip this programme 59 Off
60 Off
PROG SKIP SYS CH LABEL 61 Off
10. If you do not wish to store this channel on the programme number you selected, press the V button 1 Off B/G 03
position) then press the OK button to store.
SEARCH
Select: Enter:
to continue searching for the desired channel.
PROG SKIP SYS CH LABEL 7. Repeat steps 5 and 6 if you wish to skip or unskip further programme positions.
0 Off EXT AV1 AV1 PROG SKIP SYS CH LABEL
AV2
53 Off I F189 ---
11. If this is the channel you wish to store, press the OK button. AV3
AV4
On
12. Repeat steps 5-11 if you wish to store more channels then press the MENU button to remove the
menu from the TV screen.
15 16
Operation Operation
NexTView* NexTView*
* depending on availability of service
Individual Setting
NexTView is an electronic programme guide with up to 1 week* of programme information on those channels included in
the selected provider. When you select there will be no personal pre-selection. lets you make your own individual selection of themes,
*If the data exceeds the memory of NexTView, you will get information on less than 7 days. limiting the search to the marked ones.
When looking for information you can search by theme (sports, art etc.), date or time (e.g. broadcasts between 8 and 9 1. Select using v or V. Push B to enter.
p.m.). When you’ve found a programme you can go directly to this programme, use the timer to remind you of it or preset The menu Individual Settings is displayed.
your VCR with Smartlink. 2. Select the item you wish to mark using v or V. Confirm by pressing OK.
Repeat step 2 for all the items you wish to have in your list.
The NexTView provider is responsible for the contents of the guide. The TV set is responsible for the presentation, that is 3. When finished with the list, select using B and press OK.
the menu structure and the navigation, if there is none from the provider. If there is a navigation from the provider the basic
operation with the joystick is the same as described in the Sony navigation. Using the ‘Long Info’ menu
At first you need to select a channel providing a NexTView service. In this case the indication “NexTView” is displayed 1. Select a future programme in the column programme list using v or V. Press OK.
as soon as all data is available. When you later change the channel you can still select this NexTView service. The long info menu is displayed.
First nextTView/EPG-Providers in Europe
Operation using the Sony navigation 07 Tue SWISS TXT TPS / RINGIER nexTView
12:38
Tue 07. 04 .98
Address Mapping
1. Press to switch NexTView on and off. The position of the addresses in the
OSDA is shown in the following diagram.
2. Use the joystick buttons as follows The position values of the DPW are set
to '0'.
• moving up or downwards within a column: Use v or V. If other values are set, the complete
• going to the left columns time and date: Use b. combination will be scrolled.
Example:
11
• going to the right column icons: Use B. if the DPWC is set to '63', the char-
• Confirming a selection: Press OK. This channel has been set for a timer
(a) while in the columns date, time or icon (themes), the programme list changes according to the selection. VPS/PDC On
Speed SP
(b) while in the programme list, confirming a running broadcast brings you directly to the TV programme or confirming Timer Prog VCR1
a future programme brings you to the long info menu.

You may wish to record the selected programme with your VCR.
(only with Smartlink VCRs) VPS/PDC On
Speed SP
2. Select using b and press OK. VCR Setup VCR1
This information is transferred to the VCR connected to your set.
Setting up your VCR

07 Tue 3. Select VPS/PDC by pushing b repeatedly.
12:38
Index SWISS TXT TPS / RINGIER
Tue 07. 04 .98 With this setting on, you have the guaranteed recording of the whole broadcast
7
Tue Star Wars should there be a change in the TV programme. This only works if the selected
full list of selection Super RTL 10:35 - 12:45
personal selection 8 channel broadcasts a VPS/PDC signal.

Wed Werner - Beinhart
news broadcasts Pro 7 10:20 - 12:00
9 • Select On or Off using OK.
movies Thu Flui grüsst den Rest der Welt
12 Kabel 1 10:45 - 10:50
sports 10
Fri Once upon a time in the West 4. Select Speed using V.
entertainment Euronews 11:00 - 11:20
children 11
Sat International News Select between standardplay (SP) or longplay (LP) mode.With longplay you can
return to last menu RTL Plus 11:45 - 12:50
12 record twice as much on a videotape. The picture quality, however, may suffer.
Sun Fantasy film, USA, 1996
13
• Select SP or LP using OK.
Mon
5. Select VCR Setup using V.
Select which of the connected Smartlink VCRs you wish to programme.

• Select VCR 1 or 2 using OK.
6. Select using B. Press OK.

You are back in the last menu.
8 9
Using the TV menu system: Using the TV menu system:
Using the Further Programme Preset feature

Adjusting the picture rotation
With this feature you can a) individually adjust the volume level of each channel, b) manually fine-tune the TV to obtain
Because of the earth’s magnetism the picture might slant. In this case you can readjust the picture.
a better picture reception if the picture is distorted or c) preset the AV output for the programme positions of channels
with scrambled signals (eg from a pay TV decoder). In this way a connected VCR
records the unscrambled signal.
Set Up
Auto Tuning
2. Press the V button to select the symbol on the menu screen then press B to enter the ‘Set Programme Sorting
2. Press the V button to select the symbol on the menu screen then press B to enter the AV Preset
Manual Set Up
Up’ menu Manual Set Up
Language/Country ‘Set Up’ menu.
Further Programme Preset
3. Press the V button to select ‘Manual Set Up’ then press B to enter the ‘Manual Set Up’ menu. RGB Set Up Select: Enter:
Picture Rotation O 3. Press the V button to select ‘Manual Set Up’ then press B to enter the ‘Manual Set Up’
Personal ID -------
menu.
4. Press the V button to select ‘Further Programme Preset’ then press B to enter the ‘Further
Programme Preset’ menu. Select: Enter:
4. Press the V button to select ‘Picture Rotation’ then press B to enter the ‘Picture Rotation’ Manual Set Up
Further Programme Preset sub menu. Language/Country
PROG VOL AFT DECODER
5. Press the v or V buttons to select the relevant programme number then press the B button Manual Programme Preset
1 0 On Off
2 0 On Off Further Programme Preset
repeatedly to select a)VOL b) AFT or c) DECODER. The selected item changes colour. 3 0 On Off RGB Set Up
4 0 On Off
5 0 On Off 5. Press the v or V buttons to rotate the picture over a range of -5 to +5 then press the OK Picture Rotation O
6 0 On Off
7 0 On Off Personal ID ----- -----
8 0 On Off button to store.
9 0 On Off
6. a)VOL - Volume Offset 10 0 On Off
11 0 On Off
Rotate: Confirm: OK
Press the v or V buttons to adjust the volume level (range -7 to +7) of the channel. Store by Select: Enter: 6. Press the MENU button to remove the menu from the TV screen.
pressing the OK button. Repeat steps 5 and 6a if you wish to adjust the volume level of the
other channels. PROG VOL AFT DECODER
1 0
b) AFT - Automatic Fine Tuning

Press the v or V buttons to fine tune the channel frequency over a range of -15 to +15. Press 1 -5 On
the OK button to confirm. Repeat steps 5 and 6c if you wish to fine tune other channels.
1 -5 On Off
c)DECODER AV1
AV2 Adjusting the picture geometry for an RGB source
Press the v or V buttons to select AV1 or AV2 for the programme position then press the OK
button to confirm. You can now attach a decoder to the AV1 or the AV2 socket on the back of When connecting an RGB source such as a Sony Playstation you may need to readjust the geometry of the picture.
12
the TV and the picture from that decoder will appear on this programme number. Repeat steps
5 and 6d to preset the AV output for other programme positions.
7. Press the MENU button to remove the menu from the TV screen. 1. Press the button on the remote control to select the connected RGB source 1.
RGB Set Up
2. Press the MENU button to display the menu on the TV screen. O
H Centre
3. Press the V button to select the symbol on the menu screen then press B to enter the ‘Set H Size O
Up’ menu.
Adjust Position: Confirm: OK
4. Press the V button to select ‘Manual Set Up’ on the menu screen then press B to enter the
‘Manual Set Up’ menu.
5. Press the V button to select ‘RGB Set Up’ on the menu screen then press B to enter the RGB Set Up
‘RGB Set Up’ sub menu. H Centre O
6. Press B to select H Centre then press v or V to adjust the centre of the picture over a range H Size O
of -10 to +10. Store the new range by pressing the OK button.

Adjust Size: Confirm: OK
7. Press B to select H Size then press v or V to adjust the horizontal coordinates over a range
of -10 to +10. Store the new range by pressing the OK button.
17 18
Operation Operation
Teletext Teletext
Most TV channels broadcast information via Teletext. The index page of the teletext service (usually page 100) gives you Using the Teletext menu
information on how to use the service. Please use a TV channel with a strong signal, otherwise there may be Teletext errors.
1. With Teletext switched on, press the MENU button on the remote control to display the
menu on the TV screen. Teletext
Switching Teletext on and off 2. Press v or V to select your chosen item on the screen then press B to display the relevant Top / Bottom / Full
sub menu. Text Clear
Reveal
3. To remove the Teletext menu from the screen, press the MENU button.
1. Select the TV channel which carries the teletext service you want to view. Time Page
Page Overview
2. Press the button once to get Teletext only. Top/Bottom/Full Select: Enter Menu:
3. Press twice for Mix mode.
4. Press a third time to switch off Teletext.
m
The Top/Bottom/Full sub menu allows you to enlarge different sections of the Teletext page.
Press v to enlarge the upper half of the screen, Press V to enlarge the lower half. Press the OK
TELETEXT
Index
button to restore the page to normal size. Press b to return to the Teletext menu screen.
Top: Bottom: Full: OK
Programme 25
News 153
Selecting a Teletext page Sport 101
Text Clear
Weather 98
Input three digits for the page number using the numbered buttons on the remote control. If Text Clear is a function that displays a TV channel while a Teletext page is being searched for.
you make a mistake, type in any three digits then re-enter the correct page number. m
1. Press the button on the remote control twice to select full screen text.
2. Press the MENU button to display the ‘Teletext’ menu.
TELETEXT
Index
3. Press v or V to highlight ‘Text Clear’ and press B to select.
Using Other Teletext Functions Programme 25 4. The current TV channel is displayed. Once the text page has been found a blue
News 153
Sport 101 symbol will appear in the top left hand corner of the screen.
Weather 98
Selecting the next or preceding page 5. Press the button on the remote control to view the page.
Press the or buttons on the remote control to select the previous or next page.
m
Reveal
13
Selecting a sub page
A teletext page may consist of several sub pages. In this case an information line is displayed, Some Teletext pages contain hidden information (eg for a quiz), which can be revealed.
showing the number of subpages. It may take a few seconds for the information line to appear.
Select the sub page by pressing v or V.
1. In text mode press the MENU button on the remote control to access the ‘Teletext’ menu.
2. Press v or V to highlight ‘Reveal’ and press B to select. The hidden information is
To freeze a Teletext page
displayed on the screen.
Press the button to freeze the page. Press again to cancel the freeze.
Time Page*
Revealing the index page *depending on availability of service.
Press the button to reveal the index page (normally page 100). 216-02
Time Page allows a time-coded Teletext page (such as an alarm page), to be displayed at a set
Using colour buttons to access pages (Fastext) time.
(only available if the TV station broadcasts Fastext signals)
When the colour coded menu appears at the bottom of a page, press a coloured button on the 1. In Text mode press the MENU button on the remote control to access the ‘Teletext’
01 02 03 04 05 06 07 08
remote control (green, red, yellow or blue) to access the corresponding page. menu.
Using the feature ‘Page Catching’ 2. Press v or V to highlight ‘Time Page’ and press B to select. The ‘Time Page’ sub menu
1. Press the numbered buttons on the remote control to select a teletext page which has is displayed.
Time Page
several page numbers on it (eg the index page). 3. Enter the desired page number using the numbered buttons on the remote control. PAGE TIME
2. Press the OK button. 4. Enter the desired time using the remote control. ––– --:--
3. Press v or V to select the desired page number then press the OK button. The requested 5. Press OK to confirm the settings. The TV will exit Teletext mode and the time will be
page is displayed after some seconds. displayed in the top left hand corner of the screen. At the requested time the desired page
Select Page: 0-9 Next:
is displayed.
Page Overview*
*only available if TOP-Text is transmitted by the TV station.
In this menu the TOP-Text pages are divided into two columns, the first column showing
‘blocks’ of pages and the second showing ‘groups’ of pages.
1. Press b or B to select the first or second column.

2. Press v or V to select the relevant ‘group’ or ‘block’ of pages.
3. Press the OK button to display the chosen pages.
10 11
Additional Information Additional Information
Specifications Troubleshooting
TV system Sound output Here are some simple solutions to problems which may affect the picture and sound.
B/G/H, D/K Left/Right: 2x20W (Music Power)
2x10W (RMS)
Colour system Sub woofer: 30W (Music Power)
PAL, SECAM 15W (RMS) Problem Suggested remedy
NTSC 3.58, 4.43 (only Video In)
Power consumption No picture (screen is dark), no sound. • Plug the TV in.
Channel coverage 158W • Press the button on the front of the TV.
See the ‘Channel Display Table’ below. • If the indicator is on press the / button or a numbered
Dimensions (wxhxd) button on the remote control.
Picture tube Approx. 765x635x570mm • Check the aerial connection.
FD Trinitron, Approx. 72cm (29 inches) • Turn the TV off for 3 or 4 seconds and then turn it on again
Weight using the button on the front of the TV.
Rear Terminals Approx. 59kg
1/ 1 21-pin Euro connector (CENELEC standard) including audio/ Poor or no picture (screen is dark), but • Using the MENU system, select the Picture Adjustment
video input, RGB input, TV audio/video output. Accessories supplied good sound. display. Adjust the brightness, picture and colour balance
2 / s 2 21-pin Euro connector (CENELEC standard) including audio/ RM-893 remote control (1) levels.
video input, S-video input, Selectable audio/video output. IEC designated size AA batteries (2) • From the Picture Adjustment display select RESET to return
3 / s 3 21-pin Euro connector (CENELEC standard) including audio/
video input, S-video input, Monitor audio/video output. to the factory settings.
Optional accessory
L/G/S/I RCA connectors, variable output for audio signals. TV Stand: SU-29FQ1 Good picture, no sound. • Press the button on the remote control.
R/D/D/D
• If is displayed on the screen, press the button on the
Other features
Flat display Trinitron tube, noise reduction, graphic equaliser, remote control.
RF In 2000 page TEXT memory, personal ID, sleep timer,
No colour on colour programmes. • Using the MENU system, select the Picture Adjustment
NexTView.
Front Terminals display and adjust the colour setting.
4 Video input -phono jacks • From the Picture Adjustment display select RESET to return
Design and specifications are subject to change
4 Audio inputs - phono jacks to the factory settings.
without notice.
s 4 S video input - 4 pin DIN
Headphones jack - minijack stereo Distorted picture when changing • Turn off any equipment connected to the scart connectors on
14
programmes or selecting Teletext. the rear of the TV.
Remote control does not function. • Replace the batteries.
The standby indicator on the TV • Contact your nearest Sony service centre.
Channel Display Table flashes.
Interference on picture from external • Reduce sharpness level.

equipment.
Receivable Channels Channel Displays
B/G/H E2..12, 21..69 C02..C12, C21..69

• If you continue to have these problems, have your TV serviced by qualified personnel.
KABEL-TV (1) S1..S41 S01..S41 • NEVER open the casing yourself.
KABEL-TV (2) S01..S05 S42..S46
M1..M10 S01..S10
U1..U10 S11.S20
ITALIEN A, B..H, H1, H2 C13, C14..C20, C11, C12
D/K R01..R12, R21..R69 C01..C12, C21..C69
S01..S05 S42..S46
22 23
SECTION 2 DISASSEMBLY
2-1. Rear Cover Removal 2-2. Speaker Connector Disconnection
<=
<=
=> <=
<=
=> <=
=>
=> <=
=>
Remove the rear cover fixing screws indicated. Take care Before completely removing the rear cover disconnect the
when removing the rear cover not to damage the speaker speaker connector which is located on the inside.
cables [Disconnect the speaker connector] as speakers are
fitted inside the rear cover.
2-3. Chassis Removal and Refitting
When refitting the chassis ensure that the main

bracket is located in the beznet guide slots before
sliding the chassis forwards. Refit the
interconnecting leads in their respective purse locks.
To remove lift the main bracket rear slightly and slide the
chassis away from the beznet. Ensure that the interconnecting
leads are released from their purse locks to prevent damage
being caused.
15
2-4. Service Position 2-5. D1 Board Removal
Position the PWB as indicated to access the solder side. To remove the D1 Board release the clip circled and gently
To gain access to the D Board follow the instructions on page remove the board in a vertical direction.
19. [Removal and Replacement of the main bracket bottom
plates ].
2-6. J Board Removal 2-7. B2 Board Removal

Loosen the purse lock and release the cables indicated. Access to the
B2 Board is possible after removal of the shield case. Remove the
case and release the board socket clip as indicated in the D1 board
removal. Remove the board in a vertical direction.
Clip
Cables
Release the two metal bracket support clips located on either

side of the chassis. Tilt the bracket very slightly away from the
shield case indicated. Release the J board board socket
Shield
retaining clip and carefully lift the complete assembly
case
vertically.
Shield
case
Note :
Removal of the B2, E, and M1 printed circuit boards follows the
same procedure of releasing the securing clips as indicated
in the fig for D1 board removal.
Take care not to apply to great a pressure to the clips as this may
cause damage.
16
2-8. Front Control Module Removal 2-9. F3 and H6 Board Removal
Remove the two screws fixing the user control module to the To remove the F3 and H6 Boards release the clips circled and
front underside of the set. The control module drops down to ease the boards gently away from the main support bracket.
allow access to the boards.
Screws
Clips
2-10. H5 Board Removal 2-11. Service Connector for H5 Board

To remove the H5 Board, first remove the control door from If there is a requirement to use the front video and audio
bracket by releasing the clips circled and pushing them sockets when the chassis is placed in its service position, it
through the main support bracket. would be necessary to use an extender board and extension
cable as indicated below.
Clips
From H5 Board
To CN 1703 on
A Board
Extender board assembly A-1647-037-A
Removal of H5 Board follows the same procedure as removal The Extender board and extension cable are available as a
of the F3 and H6 Boards. service part by ordering the part number as indicated.
17
2-12. Picture Tube Removal
8 9
WARNING: 1
BEFORE REMOVING
THE ANODE CAP
3
High voltage remains in the CRT even 7
after the power is disconnected. To
avoid electric shock, discharge CRT 2
before attempting to remove the anode
cap. Short between anode and CRT
coated earth ground strap.
Coated Earth
Ground Strap 10
5 4
1. Discharge the anode of the CRT and remove the anode cap.
2. Unplug all interconnecting leads from the Deflection yoke, neck
assy, degaussing coils and CRT grounding strap.
3. Remove the C Board from the CRT.
4. Remove the chassis assembly.
5. Loosen the Neck assembly fixing screw and remove.
6. Loosen the Deflection yoke fixing screw and remove.
7. Place the set with the CRT face down on a cushion and remove
the Degaussing Coil holders.
8. Remove the Degaussing Coils.
9. Remove the CRT grounding strap and spring tentioners.
10. Unscrew the four CRT fixing screws [ located on each CRT
corner ] and remove the CRT.
[Take care not to handle the CRT by the neck.]
Removal of the Anode-Cap
* REMOVING PROCEDURES.
a b
b
Anode button
1 Turn up one side of the rubber cap in 2 Using a thumb pull up the rubber cap 3 When one side of the rubber cap is
the direction indicated by the arrow a firmly in the direction indicated by the separated from the anode button, the
arrow b anode-cap can be removed by turning
up the rubber cap and pulling it up in
How to handle the Anode-Cap the direction of the arrow c
1. To prevent damaging the surface of the anode-cap do not use
sharp materials.
2. Do not apply too great a pressure on the rubber, as this may cause
damage to the anode connector.
3. A metal fitting called a shatter hook terminal is fitted inside the
rubber cap.
4. Do not turn the rubber foot over excessively, this may cause damage
if the shatter hook sticks out.
18
REMOVAL AND REPLACEMENT OF THE MAIN-BRACKET For safety reasons, on no account should the plates be
BOTTOM PLATES. £ removed and not refitted after servicing.
(1) REMOVING THE PLATES (2) REFITTING THE PLATES

In the event of servicing being required to the solder side of the D Board printed wiring board, Because the plates differ in size it is important that the correct plates are refitted in their original
the bottom plates fitted to the main chassis bracket require to be removed. location.
This is performed by cutting the gates with a sharp wire cutter at the locations indicated by the
arrows. Please note that the plates need to be rotated 180 degrees from their cut position to allow the
tabs to be fitted into their catch positions.
Note : There are 3 plates fitted to the main bracket and secured by3 gates.
Only remove the necessary plate to gain access to the printed wiring board.
19
Catch
Tab
SECTION 3 SET-UP ADJUSTMENTS
• When complete readjustment is necessary or a new picture tube is Carry out the adjustments in the following order :
installed, carry out the following adjustments. 3-1. Beam Landing.
3-2. Convergence.
• Unless there are specific instructions to the contrary, carry out
3-3. Focus.
these adjustments with the rated power supply. 3-4. White Balance.
• Unless there are specific instructions to the contrary, set the
controls and switches to the following settings : Note : Test equipment required.
1. Color bar/pattern generator.
Contrast .................................. normal 2. Degausser.
3. Oscilloscope.
Brightness .................................. normal 4. Digital multimeter.
3-1. Beam Landing
Preparation : (2) Landing
1. In order to reduce the influence of geomagnetism on the set’s Note : Before carrying out the following adjustments adjust the
picture tube, face it in an easterly or westerly direction. magnets as indicated below [See Fig.3-4].
2. Switch on the TV set’s power and degauss with a degausser. 1. Input a crosshatch signal from the signal generator.
2. Rough-adjust the focus and horizontal convergence.
(1) Adjustment of Correction Magnet for Y-Splitting Axis. 3. Switch from the crosshatch pattern to an all-red pattern.
4. Move the deflection yoke backwards and adjust with the purity
1. Input a crosshatch signal from the pattern generator. magnet so that the red is at the centre and it aligns
2. Set the Picture control to minimum and confirm that the symmetrically [See Fig.3-5].
Brightness control is set to normal. 5. Move the deflection yoke forward to the point where the entire
3. Position the neck assembly as indicated in Fig.3-2. screen just becomes red [Mark its position].
4. Loosen the deflection yoke fixing screw. 6. Move the deflection yoke further forward until the screen just
5. Move the deflection yoke as far forward as is possible. changes colour at the edges. [Mark its position]
6. Adjust the upper and lower pin symmetrically by opening or 7. Position the deflection yoke between the two marks indicated
closing the Y-splitting axis correction magnets located on the neck above.
assembly. [See Fig 3-3] 8. Input a crosshatch pattern from the pattern generator and rotate the
7. Return the deflection yoke to its original position and re-tighten its deflection yoke so that the horizontal lines are parallel with the top
fixing screw. and bottom of the screen.
9. When the position of the deflection yoke has been determined,
fasten it with its fixing screw.
Fig.3-1 10. Switch the pattern generator to green then blue and confirm the
Y-splitting axis correction magnet purity.
11. If the beam does not land correctly in all the corners of the screen,
use disk magnets to correct it. [Confirm the corner landing for
green and blue]
Fig.3-2 Neck assy
G2
G1
Align the edge
of the neck assy with
+ the edge of the G2 grid
G3 on the G3 side.
Caution :
High voltages are present on the Deflection yoke terminals - take care
when handling the Deflection yoke whilst carrying out adjustments. Fig.3-3
20
Fig.3-4
Purity control magnets
Purity magnets Align both Purity magnets
to the vertical position
Align pips on
each magnet
3-2. Convergence
(1) Screen centre convergence [Static convergence]
1. Input a dot pattern signal from the pattern generator.

2. Normalize the picture setting.
3. [Moving vertically], adjust the V.STAT magnet so that the
vertical red, green and blue dots coincide at the centre of the
screen.
GREEN
RED
BLUE
Center dot R
G
B
R G B
Fig.3-5
V.STAT Vertical Static Magnet

Disk magnets or H STAT
rotatable disk convergence
Purity control corrects magnets correct control
these areas (a-d) C Board
this area
RV5375 (H STAT)
a b H STAT Convergence
(on mount side)
c d
Deflection yoke positioning

corrects these areas
By opening or closing the V.STAT magnet, the red green and blue
dots move in the direction indicated below.
B B
G G
Disk Magnets
R R
Note: Do not adjust the H.STAT by rotating the V.STAT

magnets as this can affect the focus setting.
21
4. Correction for HMC [Horizontal mis-convergence] and VMC HTIL correction can be performed by adding a THL correction
[Vertical mis-convergence] by using the BMC [Hexapole] magnet. assembly to the Deflection yoke.
a). HMC correction by BMC [Hexapole] magnet and movement of

the electron beam.
H M C c or r ec t i on( A ) H M C c o rre c t i o n (B )
A < B R G B A > B R G B
A = B R G B A = B R G B YCH Adjustment
+
b). VMC correction by BMC [Hexapole] magnet and movement of + + YCH VR
the electron beam.
Deflection Yoke
VMC correction(A) VMC correction(B)
TLV Adjustment
C < D C = D C > D C = D
R R R R
C C
G G G
D G TLV VR
D
B B B B
+
+ +
HAMP Adjustment Deflection Yoke
H-TRAP Adjustment
+
Adjust the HAMP using HAMPL and HAMPR registers in the HTRAP VR + +
Dynamic Convergence section of the service menu. Deflection Yoke
HTIL Adjustment
The H-TRAP should not be adjusted unless absolutely necessary as it

THL Correction assy affects the TLV settings.
22
Layout of each control 3-3. Focus Adjustment
1. Receive a television broadcast signal.

2. Normalize the picture setting.
Purity magnet
BMC (Hexaploe) magnet
3. Adjust the focus control located on the flyback transformer to
V STAT convergence magnet obtain the best focus at the centre of the screen.
Y-splitting axis correction magnet Bring only the centre area of the screen into focus, the magenta-
ring appears on the screen. In this case, adjust the focus to
optimize the screen uniformly.
Note : If you are unable to adjust the corner convergence properly,

this can be corrected with the use of permalloy magnets.
Focus
Control
a b
a-d: screen-corner
convergence defect
c d 3-4. Screen (G2), White Balance
[Adjustment in the service mode using the remote

commander]
G2 adjustment [RV5376]
1. Input a dot signal from the pattern generator.

2. Set the Picture, Brightness and Colour to minimum.
3. Apply 170V DC from an external power supply to the R, G and B
cathodes of the CRT.
4. Whilst watching the picture, adjust the G2 control RV5376
[SCREEN] located on the C Board to the point just before the
flyback return lines disappear.
Install the permalloy assembly a White balance adjustment for TV mode

for the area that needs correcting.
1. Input an all-white signal from the pattern generator.
2. Enter into the ‘Service Mode’ by pressing ‘TEST’, ‘TEST’ and
b ‘MENU’ ‘MENU’ on the Service Commander.
3. Select ‘Backend’ from the on screen menu display and press
‘OK’.
4. The ‘Backend’ menu will appear on the screen.[See Page 26]
5. Set the ‘Contrast’ to MAX.
6. Set the ‘R-Drive’ to 41.
7. Adjust the ‘G-Drive’ and the ‘B-Drive’ so that the white
balance becomes optimum.
8. Press the ‘OK’ button to write the data for each item.
Permalloy Assy
X-4387-214-1 9. Set the ‘Contrast’ to MIN.
10. Set the ‘R-Cutoff’ to 31.
11. Adjust the ‘G-Cutoff’, and the ‘B-Cutoff’ with the left and
right buttons on the remote commander so that the white balance
c becomes optimum.
d Convergence adjustment with permalloy 12. Press the ‘OK’ button to write the data for each item.
23
SECTION 4 CIRCUIT ADJUSTMENTS
4-1. Electrical Adjustments
Service adjustments to this model can be performed using the supplied Remote Commander RM-893.
How to enter into the Service Mode
1. Turn on the main power switch of the set while pressing P + (plus) and P - (minus) buttons on the front drop down control panel.
+ +
P
L/G/S/I R/D/D/D
s4 4 4 _ _
MONO
2. ‘TT’ will appear in the upper right corner of the screen.

3. Press the ‘MENU’ button twice on the remote commander to obtain the service menu on the screen.
RESET DEVICES
SERVICE MENU
INITIALISING
Backend Initialising
Deflection Reset Devices Model Setting
Ext Deflection Monitoring Destination Setting
Dynamic Convergence Device Register Setting Basic Setting
Colour Decoder 1 Special Adjustment Feature Setting
Feature Box
Field Memory
Audio/Video Switch Select : Next Menu
Sound MONITORING
Device Status monitor

Error Monitor
Production Monitor
NVM Monitor
Format Monitor
CNI Monitor
4. Push the joystick up or down on the remote commander to select the adjustment item.
5. Push the right button to proceed to the next menu.
6. If the required adjustment item is ‘Deflection’, push the down button to move to ‘Deflection’.
7. Push the joystick to the right to enter into ‘Deflection’.
8. Change the data in order to comply with each standard.
Note :
• Before performing any adjustments ensure that the correct model has been selected in the ‘Model Setting’ menu.
• After carrying out the service adjustments, to prevent the customer accessing the ‘Service Menu’ switch the TV set OFF and then ON.
24
Initialising Menu Basic Setting
Initialising
Basic setting
Model Setting
Destination Setting No Descr Min Max Data
Basic Setting 1 Sys.B/G OFF ON ON
Feature Setting 2 Sys.D/K OFF ON ON
Select : Next menu: 3 Sys.L OFF ON OFF
4 Sys.I (UK) OF F ON OFF
Model Setting
5 Sys.I (IRL) OFF ON ON
The menu contains a list with all the available models of this software to
set up the TV set in an easy way. The selection of a model is setting data 6 TXTNat.option 1 4 3
for its features and hardware resources which cannot be detected by the 7 16:9 CRT OFF ON OFF
automatic power on H/W detection as well as a special model byte to get 8 Sub-woofer OFF ON ON
an unique model identification for models which cannot be differed by
features and hardware resources (e.g. KV-28FC60 and 9 Auto stand-by OFF ON ON
KV-28FC60Z) 10 Comb-filter OFF ON OFF
11 Auto YC det OF F ON ON
Before data is set, the user will be asked if he really wants to set a new
12 Auto comb det OFF ON OFF
model. If the user agrees, automatically the destination setting menu is
shown. 13 AV2 Available OFF ON ON
14 AV3 Available OF F ON ON
Model Setting 15 AV4 Available OFF ON ON
16 AV3 Fr & rear OFF ON OFF
1 KV-28FC60 Reset
2 KV-28FC60Z 17 SECAM Tape OF F ON OFF
3 KV-29FC60 18 AV1 Sound Mute OFF ON OFF
4 KV-32FC60
5 KV-32FC60Z
Table.4-2
6 KV-34FC60 Feature Setting
7 KV-28FQ75
8 KV-29FQ75
9 KV-32FQ75
10 KV-34FQ75
Feature setting
11 KV-28FS70
12 KV-32FS70
No Descr Min Max Data
13 KV-36FS70
14 KV-28FX65 1 EPG OFF ON ON
15 KV-29FX65
16 KV-32FX65
17 KV-29FQ65 Table.4-3
BLACK = No Conformity
Device Register Setting
GREEN = Compatible Model
RED = Conformity for all data
Backend
Deflection
Table.4-1
Ext Deflection
Indication of Model Compatibility. Dynamic Convergence
Colour Decoder 1
Black: Colour Decoder 2
If any data does not match to specific model, the model name is
Audio / Video Switch
displayed in black.
Mid - X
Green:
External PLL Mid - X
All data which is checked by model setting menu concurs to model
except model byte. Sound
Red: Analog NR
All data which is checked by model setting menu concurs to model Table.4-4
including model byte.
Note:
After selecting a model, it may be necessary to reset some devices to get
the correct data. (Treble/Bass Offset of Sound, deflection adjustments,
...)
25
Audio / Video Switch Backend
No Descr Def Min Max Data No Descr Def Min Max Data
1 CVOUT1 0 0 7 0 1 R-on ON OFF ON ON
2 CVOUT2 2 0 7 2 2 G-on ON OFF ON ON
3 GD1 SW OFF OFF ON OFF 3 B-on ON OFF ON ON
4 GD2 SW OFF OFF ON OFF 4 D-col OFF OFF ON OFF
5 YCOUT 1 0 0 7 0 5 Color-axis 2 0 3 2
6 YCOUT 2 1 0 7 1 6 Contrast 40 0 63 40
7 Limit-Luv 3 0 3 3
7 LO0CTRL OFF OFF ON OFF
8 Hue 32 0 63 32
8 LO1CTRL OFF OFF ON OFF
9 Colour 31 0 63 31
9 AOUT 1 3 0 7 3
10 CTI-Level 2 0 3 2
10 AOUT 2 3 0 7 3
11 Brightness 31 0 63 31
11 AOUT 3MUTE OFF OFF ON OFF
12 Gamma 3 0 3 3
12 ZCD SW ON OFF ON ON
13 Shar pness 30 0 63 30
13 AOUT 3 3 0 7 3
14 R-Drive 41 0 63 41
14 GROUP DEL 15 0 31 15 15 G-Drive 41 0 63 30
15 AOUT3 L/R 0 0 3 0 16 B-Drive 41 0 63 23
16 AOUT3VOLF 0 0 7 0 17 ABL-Mode 0 0 3 0
17 AOUT3VOLC 3 0 7 3 18 Sub Bright 31 0 63 22
19 VM-Level 2 0 3 1
Table.4-5
20 R-Cutoff 31 0 63 31
21 Preover 2 0 3 2
Special Adjustment 22 G-Cutoff 31 0 63 23
23 DPIC-Level 1 0 3 1
24 B-Cutoff 31 0 63 29
No Descr Min Max Data 25 DC-Tran 0 0 3 0
1 RGB level 0 7 0 26 Sub-Cont 7 0 15 9
2 RGB Gain 0 31 8 27 LRGB2-Lvl 8 0 15 0
28 P-Abl 15 0 15 15
3 RGB PatLevel 0 7 0
29 Shar p.Fo ON OFF ON ON
4 RGB Patgain 0 31 15 30 Aging-W OFF OF F ON OFF
5 Extra Fw 0 25 5 255 31 Aging-B OFF OFF ON OFF
32 CB-offset1 11 0 15 11
6 EPG Chks Check OFF ON ON
33 CR-offset1 11 0 15 11
7 Slicer High OFF ON ON 34 CB-offset2 7 0 15 7
8 FCW Wide OFF ON ON 35 CR-offset2 7 0 15 7
9 Mpeg NR OFF ON OFF 36 Sub Color 0 -8 8 -2
10 Notch Filter OFF ON OFF Table.4-7
11 NLD Step -7 0 0
Colour Decoder 1
12 PKD Step -15 0 0
13 CRD Step 0 15 7 No Descr Def Mi n Max Data
14 SHP Step -10 0 -3 1 Tint 31 0 63 31
2 P/N Gw OFF OFF ON OFF
15 COL Step -10 0 -1
3 P/N ID OFF OFF ON OFF
16 SHP gain Step -5 0 0 4 Sub Colour 7 0 15 7
17 VM level Step -3 0 0 5 Sub Contr 8 0 15 8
18 NTSC Auto YC AV2 OFF ON OFF 6 Sharp FO 1 0 3 1
7 Sharp EQ 2 0 3 2
19 NTSC Auto YC AV3 OFF ON OFF
8 Sharp Gain 8 0 15 8
20 RGB Disable OFF ON OFF 9 Y-Out Lev 35 0 63 35
21 Intern GD OFF ON ON 10 BS Point 0 0 3 0
22 AV2 YC Mix Out OFF ON ON 11 C-Out Lev 45 0 63 45
12 DC Rest 0 0 3 0
Table.4-6 13 BPF FO 2 0 3 2
14 BPF Q 1 0 3 1
15 Filter Sw OFF OFF ON OFF
Table.4-8
26
Colour Decoder 1 (cont) Sound
No Descr Def Min Max Data No Descr Def Min Max Data
16 C-Trap Sw 0 0 1 0 1 Ref.Level 40 0 20 40
17 S-D Trap ON OFF ON ON 2 Auto-gain ON OF F ON ON
18 LPF ON OFF ON ON 3 Ana-in 0 0 1 0
19 Y-DL 8 0 10 8 4 Carr-mute ON OF F ON ON
20 N-Comb ON OFF ON ON 5 Clock out ON OFF ON ON
21 Video Sel 0 0 15 0 6 AM-gain ON OFF ON ON
22 RGB Sel 0 0 3 0 7 Clip mode 0 0 2 0
23 Halftone OFF OFF ON OFF 8 SCART1 Vol 79 0 127 79
24 CrOFF.1 7 0 15 7 9 SCART2 Vol 79 0 127 79
25 CbOFF.1 7 0 15 7 10 SCART Pr 27 0 127 27
26 CrOFF.2 7 0 15 7 11 I2S1-pr 16 0 12 7 16
27 CbOFF.2 7 0 15 7 12 I2S2-pr 16 0 127 16
28 VCD Freq 3 0 7 3 13 FM pr 27 0 127 27
29 VCD Mode 0 0 3 1 14 BG Nic-pr 53 0 127 53
30 AFC SENS 1 0 3 1 15 L Nic-pr 59 0 12 7 59
31 MVM OFF OFF ON OFF 16 DK Nic-pr 53 0 12 7 53
32 S-R-Y Adj 6 0 15 6 17 I Nic-pr 97 0 127 97
33 S-B-Y Adj 4 0 15 4 18 Irl Nic-pr 97 0 127 97
34 BELL/HPF 2 0 3 2 19 AVC-Decay 2 0 8 2
35 BELL FO OFF OFF ON OFF 20 SubW-vol 0 -127 0 0
36 S-GP 0 0 3 0 21 SubW-freq 20 5 40 20
37 S ID OFF OFF ON OFF 22 SubW-HPass OFF OFF ON OFF
38 RGB1 ENB OFF OFF ON OFF 23 Spat-stre +127 0 -1 127
39 HS-PH 1 0 1 0 24 Spat-Coeff 0 0 8 0
40 S/N RATIO 3 0 3 3 25 Bass offs 0 -3 +3 0
Table.4-9 26 Treble offs 0 -3 +3 0
27 Loudn offs 0 0 9 0
28 Hp-Voloffs -2 -5 +5 -2
Dynamic Convergence
29 M-S Limit +30 -128 +127 30
30 M-B Limit -30 -128 +127 -30
No Descr Def Min Max Data
31 S-M Limit +12 -128 +127 12
1 Range 63 0 63 63
32 S-B Limit -20 -128 +127 -20
2 V Stat 36 0 63 17
33 B-M Limit -12 -128 +127 -12
3 H Stat 33 0 63 31
34 B-S Limit +20 -128 +127 20
4 H amp L 37 0 63 33
35 Err.Max 40 0 255 40
5 H amp R 36 0 63 33
36 Err.Min 18 0 255 18
6 Up Y 31 0 63 31
37 Vol.Offs 0 -6 0 -4
7 Low Y 33 0 63 31
8 Y up L 30 0 63 45 Table.4-11
9 Y up R 30 0 63 31
10 Y low L 31 0 63 31 Ext. Deflection
11 Y low R 30 0 63 45
12 Mbow Up L 31 0 63 31 No Descr Def Min Max Data
13 Mbow Up R 32 0 63 31 1 Linearity 127 0 255 127
14 Mbow Low L 32 0 63 31 2 H Centre 31 0 63 31
15 Mbow Low R 32 0 63 31 3 H Trap 31 0 63 31
16 T Cor PCtrl OFF OFF ON OFF 4 Rotation 0 0 255 0
17 Top Cor Pin 31 0 63 31 5 FocusPhase 127 0 255 127
18 B Cor PCtrl OFF OFF ON OFF Table.4-12
19 Bot Cor Pin 43 0 63 31
Table.4-10
27
Deflection V SIZE
No Descr Def Min Max Data

1 V-Size 31 0 63 35
2 V-Position 31 0 63 30 V LIN
3 V-Comp 1 0 3 0
4 V-Linear 7 0 15 7
5 S-Corr 7 0 15 7
AFC V BOW
6 H-Size 31 0 63 27
7 EW-DC OFF OFF ON OFF
8 Akb Tim2 OFF OFF ON OFF
9 Pin-Amp 31 0 63 29
V POS
10 H-Comp 0 0 3 0
11 Up-Cpin 31 0 63 35
12 M-Pin 2 0 3 2
13 Lo-CPin 31 0 63 34 H POS
14 Trapezium 7 0 15 6
15 H-Position 31 0 63 25
16 VblKw 0 0 3 0
17 AFC-Bow 7 0 15 7 H SIZE
18 AFC-Angle 7 0 15 10
19 Left-Blk 38 0 63 52
20 Right-Blk 12 0 63 11
21 V-Freerun 0 0 3 0 H PIN CUSH
22 V-Aspect 47 0 63 47
23 Zoom-Sw OFF OFF ON OFF
24 U-Scan OFF OFF ON OFF
25 V-Scroll 31 0 63 31 H TILT
26 Akb-Tim 0 0 3 2
27 Up-Vlin 0 0 15 0
28 Lo-Vlin 0 0 15 0
H UP COR
Table.4-13
AFC V ANGLE
Deflection System Adjustment
1. Enter into the service mode and select ‘Deflection’ from the
menu. The ‘Deflection’ adjustment menu will be displayed.
2. Select and adjust each item to obtain the optimum image.
H LOWER COR
4-2. Volume Electrical Adjustments
Sub Colour Adjustment
1. Input a PAL colour bar signal.

2. Connect an oscilloscope to CN5400 pin 5 located on the C Board.
3. Enter into the ‘Service Mode’.
4. Choose ‘Backend’ from the menu.
5. Adjust ‘Sub Colour’ data so that the right sides of the waveform
are of equal height.
Same Level
B-Out Waveform
28
4-3. TEST MODE 2:
Is available by pressing the ‘TEST’ button twice, OSD ‘TT’ appears. The functions described below are available by selecting the two numbers. To
release the ‘Test mode 2’, press 0, 10, 20 ... twice or switch the TV set into Stand-by mode. Pressing the two Local Control buttons (+ and -) during
power ON will also switch into ‘TT’ mode.
In ‘TT’ mode, it is possible to remove the Menu from the screen by pressing the Speaker Off button once. Pressing the Speaker OFF button a
second time will cause the Menu to reappear. The function is kept even when the menu is not displayed on screen !!.
00 'TT' mode off 54 Dolby on left centre only

01 Picture maximum 55 Dolby on surround speaker only
02 Picture minimum 56 No function
03 Set speaker/headphone Volume to 30% 57 No function
07 Ageing mode 61 Service mode
08 Shipping Condition 62 Production mode
10 No function Copy the picture reset data from ROM into the picture
63
11 Sub picture adjustment reset location of NVM
12 Sub colour adjustment Copy the actual adj picture data from NVM to reset
64
location of NVM
13 Display software version and TV set configeration
65 Reset error codes
14 No function
66 No function
15 Picture Rotation - Auto Function -5 -> 0 -> + 5
67 No function
16 Picture level 50%
68 Ignore error on
17 Audio mute on
69 Ignore errors off
18 No function
70 No function
19 Sub brightness adjustment
71 No function
20 No function
72 No function
21 Destination A includes text settings, display TV status
73 Clear all programmes except 1-5 and all station labels
22 Destination L includes text settings, display TV status
74 Adjustment for PIN Amp/Upper Corner Pin for EPG
23 Destination E includes text settings, display TV status
75 Adjustment for Lower Corner Pin/ Trapezoid for EPG
24 Destination U includes text settings, display TV status
76 No function
25 Destination D includes text settings, display TV status
77 No function
26 Destination B includes text settings, display TV status
78 No video blanking
27 Destination K includes text settings, display TV status
79 Reset NVM Addresses 0EFF - 0FFF
28 Destination R includes text settings, display TV status
80 No function
30 No function
81 Smar t Link test signal on AV2 Pin 10.
31 Geometry Adjustment 1
Horizontal centre adjustment for MID-X input main
32 Geometry Adjustment 2
82 picture. Adjustment is done with left and right joystick
33 Error monitor button, released by "TV" or "OK" buttons.
34 No function 83
35 CRT 4:3 <> 16:9 ; Display TV status - No function
36 Line 23 detection switch 86
37 Velocity Modulation (VM) test 87 Personal ID reset
38 No function 88 Parental Lock off
39 No function 89 OSD mute on/off
40 No function 90 No function
41 Screen mode check 91 No function
42 Re-initialise geometry 92 No function
43 No function 93 Reserved for software group only
44 No function 94 No function
45 No function 95 Dolby Low Pass Filter ON in surround channel
46 Reserved for dealer commander 96 Dolby Low Pass Filter OFF in surround channel
47 Re-initialise NVM 97 No action
48 Set NVM as non virgin 98 No action
49 Set NVM as virgin 99 No function
50 No function
51 Set Dolby volume to 90%
52 Dolby on left speaker only
53 Dolby on right speaker only
29
Memo
30
5-1. BLOCK DIAGRAMS (1)
S7751
D( POWER SUPPLY AND DEFLECTION
) H6 ( IR
RECEIVER )
CN7611 CN7633 CN7733 POWER CN7700 CN6700 CN7100
F7626 +4.5V RECT
+4.5V IC6700
1 1 1 1 1 AC IN D6620 CN6102 4 RESP +5V STBY
RELAY
V-OUT
RY601
19
T6601 1
2 2 2 2 5 AC IN 18 V OUT TO A BOARD 3 SIRCS
RELAY MAIN RECT
6 17 5 2
RY602 D6604 Q6700 CN1700
17
7 IC7150
7 +6.5V RECT RECEIVER
16 +6.5V 16
D6619 2
F1 ( AC FILTER FUSE
) F3 ( )
POWER SWITCH
CN6620
3 DGC
15
TO A BOARD
15
13
1
1 14 CN1602
DGC 10
2
+10.5V RECT 9
1 2 13 +10.5V
D6616
7
3 12 5
14
CN6700 10
DGC
1 CHECK +135V RECT
9
D6617
+135V CN6600
FOR 4
CHECK DGC CHECK A5 E/W
2
5 8
B7 AFC PULSE
A9 EX PARA
B9 RGB AFC
+22V RECT B13 HD IN

+22V
D6618
A16 DYN FOCUS
+135V
B16 VMOD CN6500
T6600 PRT B15 V PROT
G2 1
A17 V SAW + TO C BOARD
H 4 CN5601
B17
A19 V SAW -
B19
3 1
IC603 A23 HD2 OUT H-OUT DRIVE HDT
CN6611 DY ASSY
POWER MODULE Q6801 T6801 H-OUT
4 V+ 6 V- DY+
Q6803,
A22 HD1 OUT H-OUT DRIVE HDT Q6804 V- DY-
Q6802 T6802 V- 5
TO D1 BOARD V DY
CN6601 4 CN7103
B24 H SAW
2
H DY 1 HEADPHONE R IN
+135V - H- 3
1
AMP T6805 Q6808
+ H- DY- J7925
IC6604 Q6809 3 HEADPHONE L IN
REG OUT
3
Q6810
2 HEADPHONE
6
H+ 1 H- DY+
-
+ 7
5 T6804 FBT
IC6801
TO A BOARD 7 AV3 CHROMA OUT
B25 IN PIN TO PICTURE TUBE
T6651 Q6805 HV CN1703 4 3
HV
2 1
CN6101 A25 L IN 5
AV3 LUMINANCE OUT Y/C
Q6806
5 H CENTER 1
B18
OVER CURRENT PROT 13 VIDEO
+200V
+200V RECT
4 J7900
3 OVER VOLTAGE PROT 11 TO A B20 HP2 D6805 9 AV3 L OUT
TO C BOARD L
9
BOARD FV
AC ON/OFF A7 HP1 FV
4 7 1 IC6667 3 Q6667 CN1601 +135V 2
1 11 AV3 R OUT
A24 ABL R
2 +5V
STANDBY A14 DF DRIVE 6
D 5 1
CN7102
5
S 1 IC6654 1 KEY 2
1 2 +5V
+5VREG
-15V RECT
S7100
-15V
D6809
7 TO A BOARD S7101
C 4
CN1702 3 KEY 1 S7102
8
IC6651
+15V
+15V RECT
D6808
9 14
13
DFT
T6852
DF DRIVE
Q6851
H5 ( HEADPHONE
SVHS AND PHONO )
10 11
31 32 33 34
TU1326
CN1601
SCL 4 SCL
A( ) STANDBY 5
SDA 5 SDA SIGNAL AND AUDIO AMP
IC1400 AC ON/OFF
AGC 9
AGC MONITOR I/O EXPANDER
MONITOR
11
TO D BOARD
AM1 14 OVER VOLTAGE 11 CN6101
1 OV PROT
BUFFER OVER CURRENT PROT 13
QSS1 15 Q1328, 9 AUDIO PROT
Q1329
IC8301 10 OC PROT
CN8900 MAIN COLOR DECODER IC8200 BUFFER
CVBS1 16 Q1326,
AV1 SOUND PROCESSOR Q1327
7 BLUE IN AUDIO
25 B I IC1126 PROTECTION
AUDIO AMPLIFIER Q1226,1227,
11 GREEN IN LEFT 1626
26 G I CN1801
AUDIO
15 RED IN RESET A9 QSS 1 OUT 9 INPUT
27 R I 21 POWER ON RESET
CN8101 OUTPUT 1
16 BLANKING B9 AM 1 IC1176
15 YS 3 (2/2) 10 STBY/MUTE CN1703
AUDIO AMPLIFIER
IC8801 AMP V-M (2) A2 A10 CVBS 1 OUT CENTER AND HEADPHONE RIGHT OUT 1
46 SFC OUT Cr OUT 23 QSS1 BUFFER
MAIN AUDIO/VIDEO SWITCH Q8308 67 IF IN1 SURROUND
Q8200 A1 AUDIO LEFT HEADPHONE LEFT OUT 3
1 RIGHT OUT (1) SURROUND
32 RTV SCL 13 SCL 13 INST+
AMP U-M (1) A25
Cb OUT 22 A3 AUDIO SURROUND AV3 CHROMA IN 5
2 RIGHT IN (2) Q8309 CENTER
36 (R2) AV1-R SDA 14 SDA 8 INC+ TO H5 BOARD
A2 AUDIO CENTER OUTS 1 AV3 LUMINANCE IN 7 CN7103
B25 BUFFER
3 LEFT OUT (3) AMP Y-M (3) 68 IF COMMON IN MUTE SW
25 LTV IC8500 Y OUT 21 Q8201 6 MUTE
Q8310 B1 AUDIO RIGHT Q1208 AV3 LEFT OUT 9
DIGITAL COMB FILTER OUTC 3
6 LEFT IN (4)
29 (L2) AV1-L 11 MUTE
MAIN L HEADPHONE LEFT OUT B4 A5 HEADPHONE MUTE MUTE SW AV3 RIGHT OUT 11
LUMINANCE OUT 16
AMP
5 COMB Y MAIN L OUT 39
IC8201
8 Q8300 69 IF IN 2 Q1201
MODE (1) OUTPUT AMP 10 STBY/MUTE
18 MODE 1 A4 HEADPHONE RIGHT IN
MAIN R HEADPHONE RIGHT OUT A4
MAIN R OUT 38 SURROUND SPEAKER (4) OUTPUT 1 CN1401
19 VIDEO OUT (2) AMP COMB C/ SURROUND OUT 25 12 SUR. IN SUR. OUT 14
CHROMA OUT 15 7 B4 HEADPHONE LEFT IN IC1126 HORIZONTAL DEFL A1
Q8302 FORGED S HPR SURROUND SPEAKER (4) A3 AM1 9 INPUT
HPR OUT 3 24 60 MONO IN (AM) AUDIO AMPLIFIER
20 VIDEO IN (3) 6 CLOCK IN RIGHT SPEAKER (2)
60 AV1-V (CV IN 2) SPEAKER OUT R 27 10 RIGHT IN RIGHT OUT 8 A6 AV3 RIGHT OUT RIGHT VERTICAL DEFL A6
HPL CENTRE SPEAKER (1) A2
PNR 16 45 COMB SYS HPL OUT 3 23
LEFT SPEAKER (3) B6 AV3 LEFT OUT RED TEXT OUT A10
CN8901 SPEAKER OUT L 28 5 LEFT IN LEFT OUT 7
LEFT SPEAKER (3) A1 TO A BOARD
AV2 71 XTAL IN A7 AV3 CHROMA OUT GREEN TEXT OUT B10
1 RIGHT OUT (5) CN1801
40 (R02) AV2-R OUT NTPLI 15 X8200 CENTER SPEAKER (1)
RIGHT SPEAKER (2) B1 18.432MHz SUBWOOFER OUT 30 3 CENTER IN CENTER OUT 1
72 XTAL OUT A8 AV3 LUMINANCE OUT TEXT BLANKING OUT A11
2 RIGHT IN (6)
35 (R3) AV2-R
HEADPHONE RIGHT OUT A4 CN1602 BLUE TEXT OUT B11
MAIN Y OUT 11 1 CVBS/YI CVBS OUT 3 CENTER OUT 24 TO J BOARD A13 AV LINK I/O
3 LEFT OUT (7)
41 (L02) AV2-L OUT CN8101
HEADPHONE LEFT OUT B4 B13 MODE (PIN B) 9 EXTRA PARABOLA B1
MAIN C OUT 13 48 CI
6 LEFT IN (8)
28 (L3) AV2-L
HP MUTE A5 A15 CVBS IN (TEXT) 13 HORIZONTAL DRIVE A2
10 MODE (2) IC8401 MAIN L
19 MODE 2 56 AV MAIN L IN B15 AUDIO RESET 7 FLYBACK PULSE B2
QSS 2 A11
SUB COLOR DECODER
10 AV LINK MAIN R
57 AV MAIN R IN B18 H PULSE SUB IN 15 DYNAMIC FOCUS A3
AMP Y-S (7) A21
Y OUT 21
15 C IN (5) Q8406 RIGHT OUT (9) EAST/WEST
52 AV2-C(C1) A19 V PULSE SUB IN 5 B3
36 TV OUT R
(CO2)
47 48 CI TO E BOARD
19 VIDEO OUT (6) SUB C OUT AMP U-S (8) A20 17 VERTICAL SAW+ A4
9 AV2 OUT(CV01) U OUT 22 LEFT OUT (11) B19 V SUB IN TO D BOARD
Q8405 37 TV OUT L CN4101
(YO2) 45 1 CVBS/YI CN6102
20 VIDEO IN (9) 18 VERTICAL PROTECT A5
SUB Y OUT A20 U SUB IN
58 AV2-V(Y1) IC8151
AMP V-S (9) B19
V OUT 23 I2C SWITCH 10 RGB AFC B5
Q8403 A21 Y SUB IN
CN8902
AM 2 B11
A4V B22 H PULSE MAIN IN 19 VERTICAL SAW- A7
1 RIGHT OUT (9) SDA 14 SDA SCL 2 SCL
14 X-RAY A8
A23 V PULSE MAIN IN
2 RIGHT IN (10) 15 SCL 3 SDA
33 (R5) AV4-R SCL SDA
6 ABL B8
A24 V MAIN IN
3 LEFT OUT (11)
16 VM MODULATION B7
A25 U MAIN IN
6 LEFT IN (12)
26 (L5) AV4-L Y-100 OUT B18
B25 Y MAIN IN
8 MODE 4 (3) U-100 OUT B19
20 MODE 3 IC8150
15
FM DEMULATOR CN1901
C IN AV4 (4) DPIC SW A20
49 (C3) AV4-C
B5 AV LINK I/O
1 AM IN V-100 OUT
19 VIDEO OUT B20
B4 MODE (PIN 8)
20 VIDEO IN AV4 (3) SW 13 3 DA 4 SWO 2 STANDBY
54 AV4-V(YB) CN1200
J8901 B9 CVBS IN (TEXT)
Y-100 IN
3 FM SIF A2
VARIABLE OUT +6.5V
CN8101
4 4
B8 AUDIO RESET
IC8101 IC1601 +5V IC1604 U-100 IN A3
(1/2) +10.5 +9V
A13 +5VREG +9VREG
1 2 1 2
AV LINK HP OUT B11 TEXT BLANKING IN
ANALOGUE
V-100 IN A4
HP L HEADPHONE L OUT
A8 AV3 LUM IN IC8802 6 L IN L OUT 8 L
56 AV3-V(Y2)
B12 BLUE TEXT IN
SUB AUDIO/VIDEO SWITCH DPIC SW A5
A7 AV3 C IN HP R HEADPHONE R OUT B13 GREEN TEXT IN
51 (C2) AV3-C 11 AV4 C 7 R IN R OUT 1 R A6
HP-SUB OUT A10
A6 B14 RED TEXT IN
AV3 RIGHT IN 4 4
34 (R4) AV3-R 4 AV4 Y Y OUT 3 IC1602 +5V +4.5V
IC1605 +3.5V V-PULSE SUB OUT A11
B17 V SYNC TEXT 1 2 1 2
B6 AV3 LEFT IN +5VREG DIGITAL +3.5VREG
27 (L4) AV3-L 15 AV3 C C OUT 13 TO M1 BOARD V SUB OUT
B18 H SYNC TEXT A12
CN9101 TO B2 BOARD
B14 SCL
2 AV3 Y
TO A BOARD A12 STANDBY U SUB OUT A13 CN2100
HP MUTE SWITCH
CN1801 A14 SDA Q8100, Q8101 Y SUB OUT A14
A13 PROTECTION
A10 CVBS1 IN AMP
A14 AC ON/OFF CN1700 Y MAIN OUT A16
Q8818
A15 CVBS OUT (TEXT) SDA 5 SIRCS
U MAIN OUT
6 AD IN SDA 16 B20 AUDIO MUTE A17
TO H6 BOARD
B15 AUDIO RESET SCL CN7100 V MAIN OUT A18
SCL 15 B3
AGC MONITOR 4 LED
B9 AM1 IC8700 A4 V-PULSE MAIN OUT A19

AUTOWIDE
J( )
A9 QSSI IN INTERFACE, A5
H-PULSE MAIN OUT A20
AUDIO, CHROMA,
G COMB FILTER CN1702
A3 KEY 2 1
TO H5 BOARD
A2 KEY 1 3 CN7102
35 36 37 38
CN6601
(1/2) CN6622
A24 ABL1 CY- 3
CY+ 1
A5 E/W
5 +
7 2 CN6601
B20
+
HP2
6 - 1 (2/2)
3 - SWITCH HD2OUT A23
2 - Q6104
1 5 - Q6106
3 + 7
6 +
IC6102
ACTIVE HORIZONTAL SIZE IC6100
ADJUSTMENT CONTROL HORIZONTAL DRIVE PULSE GENERATOR
5 +
B13 7
HDIN
6 SWITCH HD1OUT
-
A22
Q6104
2 Q6106
-
CN2100
1
3
TO D BOARD + VSTST 9
CN6600
IC6101 HSTAT 8
IC3302 IC3303 IC3304
HORIZONTAL DRIVE PULSE GENERATOR
14 HD REFVOUT 5 3 CY AMP B1 VP100
+
B3
6 Q6253, 72 VDEF
SCL
17 SCL HDYCON 6 2 6254 A1 HP100
71 HDEF
-
25 RSTR
A4 SDA2
16 SDA VSAW 3 Y2
IC6251 51 Y7IN
V1 V1 V3 V3 Y2
O/P DRIVE STAGE FOR DYNAMIC Y2 V0OUT 34 18 V0IN V0OUT 34 14 VIN0 YOUT7 38
52 Y6IN
IC6250 CONVERGNCE V3
A7 HP1 Y2 V1 V1 V3 13 VIN1 Y2
3 + MAIN HDY & VDY CONVERGANCE CONTROLLER TO D BOARD 53 Y5IN V1OUT 35 17 V1IN V1OUT 35 YOUT6 37
IN PIN B25 U3
1 CN6600 Y2 U1 U1 U3 12 UIN0 Y2
A9 EX PARA 54 Y4IN U0OUT 36 16 U0IN U0OUT 36 YOUT5 36
2 U1 U1 U3 Y2
-
Y2 55 U3 11 UIN1
Y3IN U1OUT 37 15 U1IN U1OUT 37 YOUT4 35
Y2 56 Y1 Y1 Y3 Y3 Y2
6 Y0OUT 38 14 Y0IN Y0OUT 38 10 YIN0 YOUT3 34
Y2IN
-
L IN A25
7 Y1 Y1 Y3 Y2
Y2 13 Y1IN
Y3 YIN1 YOUT2 33
5 57 Y1IN Y1OUT 39 Y1OUT 39 9
Y3
+
Y2 Y1 Y1 Y3 YIN2 Y2
58 Y0IN Y2OUT 40 12 Y2IN Y2OUT 40 8 YOUT1 32
IC6103 Y1 Y1 Y3 Y3 Y2
VM MOD B16 U2 Y3OUT 41 11 Y3IN Y3OUT 41 YIN3 YOUT0 31
59 U1IN 7
HORIZONTAL LINEARITY & INNER PIN CONTROL Y3
U2 60 Y1 Y1 Y3 YIN4 U2
U0IN Y4OUT 42 10 Y4IN Y4OUT 42 6 UOUT1 30
V2 Y1 Y1 Y3 Y3 YIN5 U2
B5 VFB 61 V1IN Y5OUT 43 9 Y5IN Y5OUT 43 5 UOUT0 29
6 Y3 V2
Y1 Y1 Y3
-
V2 Y6OUT 44 Y6IN Y6OUT 44 YIN6 VOUT1 28
7 62 V0IN 8 4
A16 Y MAIN IN Y50 Y1 Y1 Y3 Y3 V2
5
Y7OUT 45 Y7IN Y7OUT 1 YIN7 VOUT0 27
26 Y50IN
+ 7 3
A17 U MAIN IN U50
3 + 28 U50IN
1 A18 V MAIN IN V50 21 WEIN
30 V50IN
2 Y 100
-
TO A BOARD A2 Y100
79 Y-OUT 19 VPULSE
DF DRIVE A14
CN1200 A3 U 100 U100
IC6350 76 U-OUT
QP SIGNAL SHAPING A4 V 100 V100
V PROT 74 V-OUT
V PROT B15
Q6403, Q6404
Q6402, Q6401 WE 32 17 WE
A6 RESET 100 SWITCH SWCK 47 15 SWCK

9 UP-RST
Q3300
RSTW 24 16 RSTN
+12V
3 VM-OUT/MUTE RE 63 24 RE
+
CN6502 A5
1 5 66 BLND
+
QP OUT QP- 3 JE2 64 18 IE
2 7 TO VM BOARD
- Q6358
6 - CN5602 22 HA 23 OE
5 +
26 SRCK
7 3 +
6 1 HRD HRD 68
HRD
-
5
2 A20 H-PULSE MAIN IN
PFD-INH PFD-INH
-
IC6351
4 IC3301 9 7 P1.1
QP SIGNAL SHAPING IC6352 LLD LLD
3 70 LLD
QP OUTPUT DRIVE STAGE
3 + A19 V-PULSE MAIN IN

2 20 VP50
4 -
CN6633
6 +
1
8
7
TO
ROTATION
-
3 COIL
IC6356
ROTATION POWER AMPLIFIER
B2 ( 100 MHz
)
3 +
1
2 -
+5V
5 +
7
6 - IC6354
`H' TRAP MULTIPLEXER/SIGNAL
IC6355 CONDITIONER & `H' LIN
ROTATION PRE-AMPLIFIER
6
1
P5 5 8
4 P4
P2 2
D1 ( )
7 P7
P6 6
DEFLECTION
IC6302
D/A FOR FOCUS, ROTATION, `H' TRAP
39 40 41 42
5-2. CIRCUIT BOARD LOCATION Reference Information

IC9105 IC9109
CN9101 MAIN MICRO-CONTROLLER PROGRAMMABLE O.T.P.
9 SCLO
A(19) CN4101
SWITCH
A19 29 RESISTOR RN : METAL FILM
B6 SCLO A(18) A(19)
Q9108,9109 A18 28 A(18)
2 B1 EXTRA PARABOLA
87 SCL1
A(17) A(18)
A(17)
63 EXTRA PARA FV
TO D BOARD RC : SOLID
A17 27 3
+12V POWER ON SWITCH IC5300
FV (T6804)
B1 DISABLE SWITCH
A16 26
A(16) A(17)
35 A(16)
A3 D FOCUS
64 DF PARA
CN5400
Q5350
VIDEO OUT (RED)
C FPRD : NON FLAMMABLE CARBON
Q9110 A15 75
A(15) A(16)
36 A(15) Q15A-1 32
D(15)
B18 Y100 1 VB
C Board
52 YIN J5375
A14 74
A(14) A(15)
37 A(14) Q14 30
D(14) FUSE : NON FLAMMABLE FUSIBLE
D(13) B19 U100 R
B7 SDAO 86 SDA1 A13 73
A(13)
A(12)
A(14)
A(13)
38 A(13) Q13 28
D(12)
53 Ct1 IN 1
3 VI
G4
N
M1 Board
RS : NON FLAMMABLE METAL OXIDE
SWITCH
Q9106,9107
A12 72 39 A(12) Q12 26 B20 V100
54 Cr1 IN
H6 Board
A(11) A(12) D(11) VM Board
10 SDA0
A11 71
A(10) A(11)
40 A(11) Q11 22
D(10)
B15 SWITCH (PORT 3)
55 FS STANBY SW
9 VDF VO 8
R
8 VM E Board F1 Board RB : NON FLAMMABLE CEMENT
A10 70 41 A(10) Q10 20 Q5300
H5 Board
95 CS/DISABLE
A9 69
A(9) A(10)
42 A(9) Q9 18
D(9) B14 YMID
56 Y2 IN G CVM Board RW : NON FLAMMABLE WIREWOUND
A8 68
A(8) A(9)
43 A(8) Q8 16
D(8)
B13 UMID
5 IK
7
H S1 BoardJ : ADJUSTMENT RESISTOR
A(7) A(8) D(7) 57 Ct2 IN
A7 65 4 A(7) Q7 31
IC5325 B F3 Board
IC9108
SDA
SCL
5
6
A6 64
A(6) A(7)
A(6)
5 A(6) Q6 29
D(6)
D(5)
B12 VMID
58 Cr2 IN VIDEO OUT (GREEN) 6 A2 COIL LF-8L : MICRO INDUCTOR
A(5)
A5 63 6 A(5) Q5 27 A1 HDEFL
59 HS IN
1 VB
WP 7 30 WP A(4) A(5) D(4)
A4 62 7 A(4) Q4 25 G2
1 CAPACITOR TA : TANTALUM
A(3) A(4)
A(3) D(3) A6 VDEFL
60
L2FJL 19 CN4500 G A Board
6 XTAL1 A3 61 8 Q3 21 VS IN 3
3 VI
X9101 A2 60
A(2) A(3)
9 A(2) Q2 19
D(2)
A16 SDA2 R OUT 30
RED 1
A1
B2 Board PS : STYROL
IC9100 16MHZ A(1) A(2) D(1) 61 SDA H1
KEY PAD DRIVER 7 XTAL2 A1 59
A(0) A(1)
10 A(1) Q1 17
D(0)
TO A BOARD
CN1401 B16 SDL2
62 SDL
G OUT 28
GREEN 3
STANBY SW
3
PICTURE TUBE D Board D2 A PP : POLYPROPYLENE
11 A(0) VDF VO
A2 KEY2
5 +2 OUT2 7 94 TC INT
A0 58 Q0 15
A10 RED B OUT 26
BLUE 5
Q5325
9 8
D1 D1 Board J Board
D PT : MYLAR
A3 KEY1
CS0 81 36 R2 IN
IK 8 5 IK
A Board
IK IN 25 HV
3 +1 OUT1 1 B10 GREEN
35 G2 IN MPS : METALIZED POLYESTER
CS0
CS2 83 12 E IC5350
B11 BLUE CN4502
99 KEY2 34 B2 IN VIDEO OUT (BLUE) MPP : METALIZED POLYPROPYLENE
/RD 33
A11 BLK 2
100 KEY1 33 YS/YM2 VM OUT 45
TO VM BOARD
CN5402
1 VB TO D BOARD 5-3. SCHEMATIC DIAGRAMS AND ALB : BIPOLAR
B3 AGC MONITOR X4300 HV (T6804)
2 AGC MON
/WR 34
/RD 14
G
A20 DPIC SW
43 DPIC DCTR 503.5 kHz 5 B
3 VI
PRINTED WIRING BOARDS ALT : HIGH TEMPERATURE
CN5600
A4 RESP. LED SWITCH
12 RESP LED
A2 HD
17 HD
500K 15
Note :
Q9105
B2 FB PULSE
H1
4 • All capacitors are in µF unless otherwise noted. ALR : HIGH RIPPLE
18 HP IN STANBY SW 9 VDF VO 8
B4 PIN8
91 PIN8
Q5351
TO D BOARD • pF : µµF 50WV or less are not indicated except for
B3 EW
A5 SIRCS
98 SIRCS
1 EW
8 IK
G2 CN6500 electrolytic types.
5 IK 1
ST BY
A12
13 ST.BY B8 ABL
22 ABL IN • Indication of resistance, which does not have one for
A13 PROT
92 PROT
RV5375 rating electrical power, is as follows.
23 ABL FIL VOLTAGE DET G2
A14 AC ON/OFF D(16) +12V Q5375, 5376
93 AC ON.OFF AD15 57
D(15) A8 XRAY Note : The components identified by shading
AD14 56 13 SCP Pitch : 5mm
D(14)
IC9107 and marked are critical for safety.
E( )
Electrical power rating : 1/4W
C( )
A10 RST IN AD13 55 R.A.M.
TO A BOARD PULSE 8
CN1901
1 RESET 32 WDT CLK
AD12 54
D(13)
1
IC4301 RGB OUT / CHROMA CRT DRIVE
Replace only with the part numbers
RD
D(12) MULTI COMPONENT PROCESSOR
IC9104 7
AD11 53
D(11)
6 WR • Chip resistors are 1/10W specified in the parts list.
AD10 52
ENABLE 6 31 WDT EN D(10) CS2 D(7) • All resistors are in ohms.
AD9 51 27 CS D7 26
D(9) D6 25
D(6) k = 1000 ohms, M = 1000,000 ohms
AD8 50 A(14)
D(8) 8 A14 D(5)
78 RST IN AD7 47 D5 24
A(13)
A20 MID BUSY AD6 46
D(7)
A(12)
5 A13
D4 23
D(4) • : nonflammable resistor. Note : Les composants identifiés par une trame et
1 MID BUSY
AD5 45
D(6)
A(11)
9 A12
D3 22
D(3)
par une marque sont d'une importance
2 A11 D(2)
B5 AV LINK SWITCH 11 AVLINK OUT AD4 44
D(5)
A(10) D2 20 • : fusible resistor. critique pour la sécurité. Ne les remplacer
Q9100 28 A10 D(1)
D(4) D1 19
AD3 43
D(3)
A(9)
3 A9 D(0) que par des pièces de numéro spécifié.
AD2 42 A(8) D0 18 • : internal component.
IC9110
90 AV LINK IN
AD1 41
D(2)
A(7)
4 A8 specified.
D(1) 10 A7
MASTER RESET I.C. AD0 40 A(6)
11 A6 • : panel designation or adjustment for repair.
EO 15 79 /RST OUT A(5)
B8 RES. AUDIO 12 A5
14 RES. AUDIO A(4)
CLOCK 3 23 CLOCK 13 A4 • All variable and adjustable resistors have
A(3)
B10 RESET 100
13 RES. PICTURE
14 A3 characteristic curve B, unless otherwise noted.
DATA 2 15 DATA IC9502 A(2)
MEGATEXT I.C. A(1)
15 A2 • All voltages are in Volts.
A11 TC LED /STR 1 14 /STR 16 A1
12 TC LED • Readings are taken with a 10Mohm digital mutimeter.
( )
A(0)
17 A0
MTX RES 6 IC9400 • Readings are taken with a color bar input signal.
B20 AUDIO MUTE
11 AUDIO MUTE
DSD OFF 7
M3LEN 16
MRST 17
68
A(18)
9 A18 WR 7
VM VELOCITY MODULATION
• Voltage variations may be noted due to normal production
A(17)
6 A17 RD 32
tolerences.
MTSR 18 67 A(16) CN5444
B17 VP 100 10 A16 CN5602
3 VP 100 QP-
A(15) 1
B18 HP 100 SCLK 22 66 11 A15 D7 29
D(7) • : B + bus.
4 HP 100 A(14) 3 Q.P - Q.P - 2
5 A14 D(6) TO
D6 28
A(13) D1 BOARD QP+
IC9500 4 A13 D5 27
D(5) 4 Q.P + Q.P + 3
TEXT BLANKING GENERATOR SWITCH 17 RES
A(12) D(4) CN6502 • : B - bus.
12 A12 D4 26 4
B15 TXT CLK Q9504,9503
11
A(11) D(3)
4 VS 1 A11 D3 25
A(10)
10
12
5 HS 31 A10 D2 23
D(2) CN5402 • : RF signal path.
A(9) D(1) VM BUFFER
13 2 CLK 2 A9 D1 22 TO E BOARD 2 VM IN VM AMP VM OUT 7
9 A(8) Q5402,5403,
XIN 6 D(0) CN4502 Q5400,5401
5404,5405
Q5406,5407
2 64 BLAN X9500 A(7)
3 A8 D0 21 8
VM • : earth - ground.
8 20.480MHZ 13 A7
XOUT 7 A(6)
B11
B9
TXT BLK
VIDEO
6
1
10 CVBS
A(5)
A(4)
14 A6
15 A5
NECK • : earth - chassis.
ASSY
B16 TCS 16 A4
3 TCS A(3)
17 A3
8 GPO A(2)
TXT B
M1 ( )
B12 18 A2
63 B
AMPLIFIER A(1)
B13 TXT G 19 A1
Q9500,9501, 62 G MICRO TEXT
9502 A(0)
B14 TXT R 20 A0
61 R
43 44 45 46
H5[ FRONT AV, S-VIDEO ] H6[ IR RECEIVER FOR SIRCS AND LED ] F3 [ POWER SWITCH ]
F3 [ PRINTED WIRING BOARD ]

H6[ PRINTED WIRING BOARD ]
F1 [ AC FILTER FUSE ]
H5[ PRINTED WIRING BOARD ]
F1 [ PRINTED WIRING BOARD ]
47 48
E [ R, G, B OUT CHROMA ]
49 50
E [ PRINTED WIRING BOARD (A side) ]
E [ PRINTED WIRING BOARD (B side) ]
51
M1 [ PRINTED WIRING BOARD (A side) ] M1 [ PRINTED WIRING BOARD (B side) ]
52
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
T
M1 [ MICRO PROCESSOR AND TEXT DECODER ]
53 54 55
21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
D1 [ DEFLECTION ]
56 57 58
A B C D E F G H
IC IC6351 B-5 Q6102 H-3 Q6113 H-4 Q6128 H-4 Q6352 C-3 Q6405 C-1 D6127 D-3 D6354 A-3
IC6100 G-2 IC6352 A-5 Q6103 G-3 Q6118 G-5 Q6129 G-3 Q6353 B-3 Q6455 F-3 D6128 D-3 D6355 C-4
IC6101 H-2 IC6353 D-4 Q6104 F-3 Q6119 G-4 Q6201 G-4 Q6354 B-2 Q6465 D-2 D6129 F-3 D6358 B-2
IC6102 G-3 IC6354 D-2 Q6105 G-2 Q6120 G-4 Q6202 G-4 Q6356 B-5 DIODE D6253 F-2 D6359 C-1
IC6103 H-5 IC6355 D-1 Q6106 F-2 Q6122 G-4 Q6250 F-4 Q6358 B-2 D6102 G-3 D6255 D-2 D6401 E-4
IC6250 F-3 IC6356 E-1 Q6107 H-2 Q6123 H-3 Q6251 E-4 Q6401 D-5 D6104 G-4 D6350 C-4 D6402 E-4
IC6251 D-2 TRANSISTOR Q6108 G-2 Q6125 H-5 Q6252 E-2 Q6402 E-5 D6105 G-3 D6351 C-5 D6403 D-1
IC6302 D-3 Q6100 G-3 Q6110 F-2 Q6126 H-5 Q6350 C-4 Q6403 D-4 D6107 H-4 D6352 A-3 D6404 C-1
IC6350 B-3 Q6101 G-2 Q6112 H-3 Q6127 D-3 Q6351 B-5 Q6404 D-5 D6108 H-4 D6353 B-2 D6405 D-1
D1[ PRINTED WIRING BOARD ]
59 60
A B C D E F G H I J K L M
D board Waveforms
5ms/div 5ms/div
TP1 TP2 IC Voltage Table

1
Ref No Pin No Voltage (V)
1 134.7
2 2.5
IC6600
3 9.1
4 0
570 mVp-p (V) 58 Vp-p (V)
1 1.4
2 TP3
10us/div
TP4
TP4
10us/div
3 -12.2
IC6700 5 -0.8
6 15.0
7 1.4
1 0
2 0
2.28 Vp-p (H) 131 Vp-p (H) 3 0
3 IC6801
10us/div 10us/div
5 2.2
TP5 TP6
6 6.7
7 0.1
4
2.14 Vp-p (H) 150 Vp-p (H)
10us/div 20us/div
TP7 TP8
5
1.07 kVp-p (H) 2.3 Vp-p (H)
10us/div 10us/div
TP9 TP10
1.72 kVp-p (H) 265 Vp-p (H)

5ms/div 5ms/div
TP11 TP12
1.98 Vp-p (V) 116 Vp-p (V)
Semiconductor Voltage Table

8
Ref (e) (b) (c) Ref (e) (b) (c)
Q6676 1.8 2.5 5 Q6603 0 0 11.8

Q6677 1.8 2.1 5 Q6605 0 0.7 0
Q6678 1.8 1.6 5 Q6608 0 0 3.5
Q6807 0 6.4 0 Q6681 0 11.4 0
Q6801 0 0.3 61 Q6607 0.3 0.5 5
9 Q6802 0 -0.4 73.7 Q6851 0 -1 84.6
Q6803 0 135.2 0 Ref (s) (g) (d)
Q6804 0 0 135.6 Q6805 0 2 22
Q6602 9.1 11.8 0 Q6806 0 1.4 135.7
D [ PRINTED WIRING BOARD ]

10
IC IC6654 L-5 TRANSISTORS Q6607 I-5 Q6676 M-4 Q6700 G-3 Q6806 C-4 D6602 F - 10 D6615 M-3 D6621 L-2 D6627 J-1 D6652 M-8 D6659 M-6 D6701 G-3 D6810 D-4
NOTE:
IC6600 I-6 IC6667 N-5 Q6600 G - 10 Q6608 L-2 Q6677 N-4 Q6801 B-8 Q6807 M-2 D6603 L-4 D6616 I-4 D6622 M-3 D6628 N-1 D6653 M-8 D6676 M-3 D6805 C-8 D6811 D-4
Portions of the circuit marked as shown are high
IC6604 K-8 IC6676 M-5 Q6602 I-7 Q6611 M-1 Q6678 M-4 Q6802 F-5 Q6851 B-9 D6604 K-9 D6617 H-4 D6623 H-5 D6629 L-3 D6654 M-7 D6677 M-3 D6806 C-8 D6851 B-8 voltage areas. Use care to prevent electric shock
IC6651 M-7 IC6700 F-4 Q6603 H-7 Q6651 M-5 Q6679 M-3 Q6803 B-6 DIODE D6605 M-5 D6618 K-2 D6624 M-2 D6630 L-2 D6655 M-7 D6678 M-3 D6807 G-7 D6852 B-8 during inspection or repair.
IC6652 G-1 IC6801 C-1 Q6605 L-4 Q6652 N-5 Q6680 M-3 Q6804 E-4 D6600 G - 10 D6610 M-3 D6619 H-3 D6625 M-2 D6631 F - 10 D6656 M-5 D6679 M-4 D6808 H-7
IC6653 I-1 Q6606 M-1 Q6667 M-5 Q6681 M-4 Q6805 D-4 D6601 G - 10 D6613 M-4 D6620 I-3 D6626 M-2 D6651 M-8 D6658 M-8 D6681 M-5 D6809 M-2
61 62
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
T
D [ POWER SUPPLY AND DEFLECTION ]
63 64 65
21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
A [ SIGNAL AND AUDIO AMPLIFIER ]
66 67 68
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
A B C D E F G H I J K L M N
IC Voltage Table
B IC Voltage Table 1
1 0
2 -11
3 10
C IC1126 6 -19
9 0
10 4.1 2
12 -11
1 0
2 -11
D
3 10
IC1151 6 -18
9 0
10 4.1 3
12 -11
E 1 0
3 4.6
5 4.6
6 4.0
IC1400
9 0
10 0 4
F 14 4.5
15 4.5
1 0
3 3
6 3
7 0
G 8 0
IC1176
5
9 0
11 3
12 0
13 0
H 14 0
8
K
L
9
10
Semiconductor Voltage Table

N
Ref (e) (b) (c) Ref (e) (b) (c)
Q1100 10.5 10.6 0 Q1229 5 4.9 0

11
Q1101 0 0 2.2 Q1326 1.2 1.8 4.4
Q1201 0 0.6 0 Q1327 5 4.4 1.7

O
Q1202 0 0.1 2.1 Q1328 2.6 3.2 8.3
Q1300 0 4.6 0 Q1329 5 8.3 4.5
Q1226 0 0 4.9 Q1601 0 0 5

12
Q1227 0 0 4.9 Q1602 3.9 3.3 0
P
Q 13
14
15
A [ PRINTED WIRING BOARD ]
69 70 71
21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
A B C D E F G H I J
Semiconductor Location Table IC Voltage Table
C
IC Q8150 A-5 Q8405 G-3 D8810 G-4
IC Voltage Table
IC8101 B-5 Q8151 A-5 Q8406 G-2 D8811 D-9
1 IC8150 B- 5 Q8152 A-5 Q8501 F-6 D8812 D-8
Ref No Pin No Voltage (V) Ref No Pin No Voltage (V)
IC8151 A-4 Q8153 A-5 Q8901 D-1 D8813 G-4
IC8200 J-3 Q8154 A-4 DIODE D8814 G-4
2-3 4.7 1-2 1.5
IC8201 J-4 Q8156 B-4 D8150 A-5 D8900 A-3
D
IC8202 I-3 Q8157 C-4 D8151 A-5 D8901 J-8 4-6 2.5 3 0.5
IC8301 F-2 Q8200 J-3 D8152 A-5 D8902 A-3
7 0.6 6 2.6
IC8302 F-1 Q8201 J-4 D8153 I-4 D8903 A-3
IC8401 I-2 Q8202 I-4 D8200 B-8 D8904 J-7 17 0.7 7 0.9
IC8402 H-2 Q8300 D-1 D8201 B-8 D8905 J-7
21 5.0 9 1.0
IC8500 E-2 Q8302 E-1 D8202 H-9 D8906 I-7
E
2 IC8550 G-1 Q8303 F-2 D8203 H-8 D8907 I-8 36 3.8 11 2.8
IC8601 I-4 Q8305 E-1 D8801 E-8 D8908 I-8
37 3.7 12-13 1.8
IC8602 H-1 Q8306 F-1 D8802 F-4 D8909 I-7
IC8500
IC8603 I-1 Q8308 E-3 D8803 G-3 D8910 I-7 38 7.0 14 1.0
IC8604 I-1 Q8309 F-1 D8804 D-9 D8911 I-7
IC8700 C-1 Q8310 E-2 D8805 D-8 D8912 D-3 IC8200 40 7.0 22-23 5.0
IC8801 F-4 Q8401 H-2 D8806 D-8 D8913 H-7

F
45 3.7 26 5.0
TRANSISTOR Q8402 C-7 D8807 D-8 D8914 H-7
Q8100 G-9 Q8403 H-3 D8808 D-8 D8915 H-7 56-57 3.8 30 5.0
Q8101 F-9 Q8404 G-2 D8809 G-3 58 2.6 37 2.4
3
60 3.8 40-42 1.9
G
67 0.4 44 1.9
68-69 1.5 1 4.2
71 2.4 3 4.1
IC8101
72 2.2 5 0.6
1-3 5.0 8 0.5

H
4 IC8201 5-10 5.0 1 1.8
12-14 5.0 2-4 4.5
1 2.4 5 0
2 1.9 6-7 4.6

I
3 1.5 8 0
4 0.1 9 4.6
5 2.4 10 3.4
5 7 2.6 11 3.8 J
9 0.3 IC8801 13 4.5
10 0.8 22-30 4.5
11 2.5 32-41 4.5

IC8301
13-14 4.5 43 4.6
Semiconductor Voltage Table K
20 2.4 45 3.7
21 1.8 46 3.5
Ref (e) (b) (c) Ref (e) (b) (c)
6 22-23 1.9 47 4.5
Q8150 2.9 3.6 5.0 Q8302 1.0 1.6 9.0 24 0.1 49 4.5
Q8151 0 0.4 4.8 Q8303 1.3 1.9 7.7

25-27 2.5 51-80 4.5 L
29 2.8 2 2.4
Q8152 0 4.6 0 Q8305 1.3 1.9 7.3
37 1.1 3 4.6
Q8153 0 0.4 4.8 Q8306 0.1 0.1 5.0
38 4.0 4 4.6
Q8154 0 4.6 0 Q8401 0.1 0.1 5.0
1 2.3 5 0.4
Q8156 3.9 4.6 9.0 Q8404 1.2 1.9 7.4 IC8151 M
2 1.9 6 4.6
7 Q8157 3.9 4.6 9.0 Q8809 2.7 2.1 0 4 0.1 7 0.4
Q8200 1.9 2.5 5.0 Q8817 3.9 4. 6 9.0 9 0.3 9 0
Q8201 1.2 1.9 5.0 Q8901 1.9 2.5 9.0 10 4.0 10 2.6
Q8202 5.1 5.8 9.0 Ref (s) (g) (d) 11 2.4 1 3.0 N
Q8300 1.6 1.0 0 Q8815 1.8 0 0.6 20 2.4 2 2.5

IC8401
21 1.7 3 1.7
22-23 1.9 IC8150 6 4.3

8 37 1.1 12 2.4
O
38 4.0 13 4.6
40 3.3 14 2.5
47 3.8
48 1.8
P
R
10
J [ PRINTED WIRING BOARD ]
72 73 74
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
J [ INTERFACE, AUDIO, CHROMA (Page 1/2) ]
75 76 77
21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
J [ INTERFACE, AUDIO, CHROMA (Page 2/2) ]
78 79 80
Ref (e) (b) (c) Ref (e) (b) (c)
Q5301 3.5 2.8 0 Q5300 3.7 4.4 3.8
Q5326 3.6 3 0 Q5325 3.7 4.4 3.8
Q5352 3.7 3 0 Q5351 3.8 4.4 3.9
Q5375 10.3 10.9 11 Q5350 11 10.9 3.9
Q5376 11 10.3 10.9
IC Voltage Table
1 3.9
3 3.8
5 8.4
IC5300
7 153.0
8 157.0
9 152.0
1 3.9
3 3.8
5 8.7
IC5325
7 150.0
8 155.0
9 150.0
1 3.9
3 3.8
5 8.4
IC5350
7 150.0
8 156.0
9 149.0
C board Waveforms
5us/div 10us/div
TP1 TP2
117 Vp-p (H) 109 Vp-p (H)

10us/div 10us/div
TP3 TP4
TP4
109 Vp-p (H) 2.5 Vp-p (H)

10us/div 5us/div
TP5 TP6
2.5 Vp-p (H) 2.5 Vp-p (H)

10us/div
TP7
3.64 Vp-p (H)
C [ PRINTED WIRING BOARD ]
81 82
Ref (e) (b) (c) VM board Waveforms
Q5400 0.9 1.5 9.0
Q5401 1.0 1.6 5.2 TP1
10us/div
TP2
10us/div
TP3
20us/div
Q5402 6.0 6.6 9.0

Q5403 5.9 6.0 9.0
Q5404 5.2 5.9 0
Q5405 5.9 5.8 0
Q5406 135.1 134.6 68.2
Q5407 0.8 1.4 68.2
Q5408 7.6 6.9 1.4 117 Vp-p (V) 109 Vp-p (V) 109 Vp-p (V)
Q5409 6.9 7.5 9.0
B2 [ PRINTED WIRING BOARD [A] SIDE ] B2 [ PRINTED WIRING BOARD [B] SIDE ]
VM [ PRINTED WIRING BOARD ]
83 84
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
B2 [ 100Hz ]
85 86 87
21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
5-5. IC BLOCK DIAGRAMS 5-4 SEMICONDUCTORS

U2860B-BFPG3 IMZ1A-T109 2SC2500-B HH
TDA9320H-N1-518
74LVC08D 2SC2551-O
BA7046F KA78R05TU MSP3410D-QA-B4
STV9379 2SC2551O-TPE2
BA7046F-T1 KA78R09TU SAA7185WP 51
4
33 5
14 8
LM393PS-E20 KA78R33TU SDA5273P-C134-GEG 6
D BOARD IC6700 STV 9379 J BOARD IC8101 TDA2822D MB3793-42NF SDA5275 52 32

3
MB3793-42NF-ER 2
II
2 6 3 1
2 NJM2240M 9 1 68 61
4 5 6
NJM2240M(TE2) 60 64 20
10
FLYBACK
GENERATOR 7
NJM3404AD 1 7
1 1 ( TOP VIEW )
8 7 1 19
1 - (TOP VIEW) E C B
8 5 18 52 3 2 1
POWER
AMPLIFIER
5 1
2
JJ
6 3 BC546B
7 + 4
THERMAL
3 1 : V IN 26 44
BC556B IRF614
PROTECTION 5 2 : V OUT
3 : GND 27 35 43 IRF620 2SC2688-LK
4 : ON/OFF CONTROL TC4S69F
( TOP VIEW ) 2SC3840K
4
5 4 TEA6422DT
4
1 4 CAD005AD LM393N KK
( TOP VIEW )
LM358 M27C800-100K1 C 5
LM393N
3
M5216P 6 1 44 40 1 2
M24C32-BN6 7 39 S G D
E BOARD IC4301 CXA2100Q-TL ST24C16FB6 TC55257DFTL-70V-EL
CXA1855Q-T6 LL
TDA2822M B
56 48 51 50 49 54 52 45 46 47 40 41 38 39
36 25
UPC393C C E
H SYNC
36
8 7 6 5
BF199 E
PHASE 37 17 29 C B
SEP 32fH
DET
44 24 BF199-AMMO DTA144EK DTC144EK
VCO
42 18 28
V SYNC
PHASE PHASE ( TOP VIEW )
IN
OUT
DTA144EK-T146 DTC144EK-T146
SEP GATE H.DRIVE 37
DET 1/32 SHIFT 48 13 GND DTC114EK 2SA1037K-T-146-R MM
2SC3997CA
SAND 10
1 12
DTC114YKA-T146 2SA1162-G
CASTLE 1 2 3 4
53 S
SEP
30
( TOP VIEW ) MSM65355GS DTC123EK 2SC2412K-QR
SHARP DC
SUB DL NESS TRAN
D PIC 50/60 ID 34 TDA6111Q/N4 DTC123EK-T146 2SC2412K-T-146-R
VIDEO
CONT TRAP SAB-C161R1-LM MARKING SIDE VIEW
55 SW CLP 35 LM78L05ACZ TLC2933 DTC124EKA-T146
WIDE 32
57 ACC TOT GATE
Count Down
525/625
Sawtooth
31
LM78L12ACZ
Gen.
L78L05ACZ-AP
C NN
INTER- ( TOP VIEW )
ACC WIDE
DET
KILLER
DET
LACE
Parabola 33 L78L12ACZ-AP 1 14
Gen.
CXA1875AM-T4 E
59 DEM
Y/C OSD D- GB CUT
22 HE4094BT E B C B
PAL/ PAL fsc YS YS/YM
20 APC NTSC ID ID MIX
SW SW
PIC
MIX
COL
y
BRT
DRV OFF
BLK 24 MC14052BDR2
26
2 MC74F157ADR2 B
HUE HV C OO
9 DEM COLOR CLP DIG COMP AKB 27
SN74LS221D 30 7 8
E
I REF VCO AXIS &AXIS CLP ABL 74HCT4046AD/S470 1 9
DTA144ESA 2SA933AS-RT
BF421-AMMO
43 60 62 61 64 1 3 4 5 6 7 8 11 12 13 14 15 16 17 18 19 29 28 21 23 25 DTA144ESA-TP 2SA933AS-QRT
16 9 SBX1981-51 DTC114ESA-TP 2SA933S-RT
IN
GND
OUT TDA7309D013TR DTC144ESA-TP 2SC1740S-RT 2SC4793
TLC5733A 2SA1175-HFE 2SC2785-HFE PP
J BOARD IC8200 MSP3410D-QA-B4 20 11
64 49 2SA733-K
6 6
MB3793-42PNF-ER
3 1 5 4 7 6
5 8 1 48
SBUS Interface I2C Interface 1 8 1 10

E C
( TOP VIEW ) B
( TOP VIEW ) QQ
5
D/A
2 6
5
5
DEMODULATOR
D/A
7 SDA9361 16 33
2
3
SDA9288X-B121 B
B
DFP
D/A
5
9
CXD2053S 33 23 TDA9143/N2 17 32
BF87-127
E C
C
E
6
D/A
0 TDA4780/V3 TDA9144/N2
2
DENT
MB88141PF-ER
8 D/A
4 TOP209P 2SA1837 RR
3
A/D
7 34 22 TDA9170T 2SD2396H
1 D/A 4
30 A/D 8 28 15 ( TOP VIEW )
MSM534031E3Y-Z
5 1 12 8 5
3 0
4
3 5
32 17
3 1 44 12
37 SCART Switching Facilities
1 14
36
( TOP VIEW ) 1 11 SS
1 4
( TOP VIEW )
24 13
1 16 E
B C B
C E
( TOP VIEW )
B
C E
88 89 90
DAN202K D4SB60L ESAC39M-06C UF4005PKG23
DAN202K-T-146 D4SB60L-F ESAC39M-06CF38
RBA-402L
ANODE
3
1
2
CATHODE
2 3 1
1
DAP202K 2 3
DAP202K-T-146
3
1 2 3
ERA38-06TP1 MTZJ-T-77-9.1
1 ERA82-004TP1 MTZJ-T-77-12
2 GP08DPKG23 MTZJ-T-77-22 MA3033-L
MTZJ-T-77-12 MTZJ-T-77-18B MA3033L-TX
MTZJ-T-77-15 MTZJ-33C MA3056M-TX
2 3 1 MTZJ-T-77-2.2A RD5.6ESB2 MA3062M-TX
MTZJ-T-77-3-3B RD9.1ESB2 MA3030-H-(TX)
MTZJ-T-77-3.6A PGKE200AG23
DA204K MTZJ-T-77-4.7B 1SS119-25
3
DA204K-T-146 MTZJ-T-77-5.6B 1SS119-25TD
MTZJ-T-77-6.8
3 MTZJ-T-77-7.5B 1
2
CATHODE
1 NC
2
2 3 1
2 3 1
MA3051L-TX
ANODE
D1NL20-TA RGP02-20EG23 CATHODE
D1NL20U-TR RGP10GPKG23
D1NS4-TR RGP15GPKG23
EGP20G S2LA20F
EL1Z 1SS133T-77 ERC04-06SE
GP08D 1SS83
ANODE
GP08DPKG23 1SS83TD
R2K-V1 CATHODE
CATHODE MA73-TX
ANODE
ANODE
ERD08M-15
D10SC4M-F 1SS355TE-17
D10SC6M RD12SB2
UDZ-TE-17-3.9B
UDZ-TE-17-4.7B
UDZ-TE-17-6.2B
UDZ-TE-17-6.8B
UDZ-TE-12B
3 CATHODE
1 2 ANODE
ANODE
CATHODE
1 2 3
91
SECTION 6
EXPLODED VIEWS
NOTE :
• Items with no part number and no description are not • Items marked “ * “ are not stocked
stocked because they are seldom required for routine since they are seldom required for
service. routine service. Some delay should
• The construction parts of an assembled part are indi- be anticipated when ordering
cated with a collation number in the remarks column. these items.
6-1. CHASSIS
25
20
21
19
22
23
10
9
12 8
11 7 6
17
13
5
24
18 4
14
15
3
16
17
1
18
REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK
1 *4-205-196-31 MAIN BRACKET (AE-5) 14 *A-1624-086-A F1 BOARD, COMPLETE
2 *A-1640-398-A D BOARD, COMPLETE 15 *A-1634-057-A M1 BOARD, COMPLETE
3 £ 1-453-340-11 TRANSFORMER ASSY, FLYBACK (NX4522//U214) 16 *A-1631-115-A A BOARD, COMPLETE (KV-29FQ65B)
4 *4-204-476-04 BRACKET, J1 *A-1631-114-A A BOARD, COMPLETE (KV-29FQ65E/29FQ65K)
5 *A-1651-137-A J BOARD, COMPLETE 17 1-542-437-11 SPEAKER (2CM)
6 *A-1640-380-A D1 BOARD, COMPLETE 18 1-542-436-11 SPEAKER (24X4CM)
7 *A-1640-381-A E BOARD, COMPLETE 19 *A-1678-191-A WOOFER ASSY (SP) 20-23
8 *A-1620-132-A B2 BOARD, COMPLETE 20 4-204-775-01 BAFFLE, WOOFER
9 *4-204-477-04 BRACKET, J2 21 7-685-663-71 SCREW + BVTP 4X16 TYPE IT-3
10 1-790-082-11 CABLE, RF 22 1-529-417-11 SPEAKER (8CM)
11 *1-555-716-51 CABLE, PIN 23 4-204-776-01 BOX, WOOFER
12 £ 1-690-270-21 CORD, POWER (WITH CONNECTOR) 24 4-205-448-01 COVER, REAR
13 1-693-339-11 TUNER/VIF(FR) (KV-29FQ65B) 25 7-685-663-79 SCREW + BVTP 4X16 TYPE 2 IT-3
1-693-338-11 TUNER/VIF(AEP) (KV-29FQ65E/29FQ65K)
92
6-2. PICTURE TUBE
75
80
81 74
82
83
84
79 74
78 76
77
71 72 73
51
69 70
68
67
66
52
61
64
53
62
54 63 65
60
55 59
56 58
57
51 X-4200-603-2 BEZNET ASSY 64 4-205-464-01 GUIDE, LIGHT
52 A-1610-073-A FRONT CONTROL ASSY 53-64 65 £ 1-571-433-31 SWITCH, PUSH (AC POWER)
53 *4-205-460-01 BRACKET, CONTROL 66 4-204-666-01 SHEET, BLOTTING
54 4-205-463-01 WINDOW, ORNAMENTAL 67 £ 8-451-504-31 DEFLECTION YOKE (Y29RSC-S)
55 4-047-464-01 CATCHER, PUSH 68 1-452-896-11 COIL, NA ROTATION (RT200)
56 *4-205-732-11 DOOR PAINTED 69 £ 8-453-011-11 NECK ASSY, (NA299-M)
57 3-022-410-01 DAMPER 70 *A-1644-108-A VM BOARD, COMPLETE
58 3-703-035-11 SHAFT, LID 71 *A-1638-139-A C BOARD, COMPLETE
59 4-205-462-01 BUTTON, POWER 72 4-369-318-21 SPRING, TENSION
60 4-204-426-01 SPRING 73 £ 1-416-654-11 COIL, DEMAGNETIC
61 *A-1646-211-A H6 BOARD, COMPLETE 74 4-203-390-11 CUSHION, DGC
62 *A-1624-085-A F3 BOARD, COMPLETE 75 4-204-768-01 HOLDER, DGC (29”)
63 *A-1646-210-A H5 BOARD, COMPLETE 76 £ 1-251-807-22 CAP ASSY, HIGH-VOLTAGE
93
77 3-704-495-01 SPACER, DY 81 1-452-094-00 MAGNET, ROTATABLE DISK; 15MM
78 £ 8-735-053-05 PICTURE TUBE (M68LNH060X) 82 1-452-032-00 MAGNET, DISK; 10MM
79 4-046-765-12 SCREW, TAPPING 7+CROWN WASHER 83 X-4387-214-1 PERMALLOY ASSY, CORRECTION
80 4-308-870-00 CLIP, LEAD WIRE 84 3-701-007-00 BAND, BINDING
94
SECTION 7
ELECTRICAL PARTS LIST
PARTS LISTING TABLE OF CONTENTS
Page
F3 BOARD COMPLETE Parts List : ................................................................................................... 96
H5 BOARD COMPLETE Parts List : ................................................................................................... 96
H6 BOARD COMPLETE Parts List : ................................................................................................... 96
B2 BOARD COMPLETE Parts List : .................................................................................................. 96
F1 BOARD COMPLETE Parts List : .................................................................................................. 98
A BOARD COMMON Parts List : Parts common to all models listed in this manual ......................................... 98
A BOARD VARIANT Parts List : Parts that belong only to the model specified
Model
KV-29FQ65B, KV-29FQ65E, KV-29FQ65K, ..................................................................................... 100
M1 BOARD COMPLETE Parts List : ................................................................................................... 100
C BOARD COMPLETE Parts List : ................................................................................................... 103
D1 BOARD COMPLETE Parts List : .................................................................................................. 104
E BOARD COMPLETE Parts List : .................................................................................................. 109
D BOARD COMPLETE Parts List : ................................................................................................... 110
J BOARD COMPLETE Parts List : .................................................................................................. 115
VM BOARD COMPLETE Parts List : .................................................................................................. 121
MISCELLANEOUS : .................................................................................................. 122
ACCESSORIES AND PACKAGING MATERIALS :................................................................................................. 122
Note : Refer to the designated variant parts list when seeking a part indicated by an asterisk (*)
95
The components identified by
shading and marked are critical
for safety
F3 H5 H6 B2 Replace only with the part number
specified.
*A-1624-085-A F3 Board, Complete < SWITCH >
< CONNECTOR > S7100 1-771-947-11 SWITCH, TACTILE

S7101 1-771-947-11 SWITCH, TACTILE
CN7700 £ *1-695-292-11 PIN, CONNECTOR (POWER) S7102 1-771-947-11 SWITCH, TACTILE
CN7733 £ *1-580-844-11 PIN, CONNECTOR (POWER)
*A-1646-211-A H6 Board, Complete
< SWITCH >
< CAPACITOR >
S7751 £ 1-571-433-31 SWITCH, PUSH (AC POWER)
C7150 1-126-969-11 ELECT 220UF 20.00% 50V
*A-1646-210-A H5 Board, Complete
< CONNECTOR >
< CAPACITOR >
CN7100 *1-564-519-11 PLUG, CONNECTOR 4P
C7900 1-101-810-00 CERAMIC 100PF 5.00% 500V
C7901 1-101-810-00 CERAMIC 100PF 5.00% 500V < DIODE >
C7925 1-137-372-11 MYLAR 0.022UF 5.00% 50V
C7926 1-137-372-11 MYLAR 0.022UF 5.00% 50V D7150 8-719-080-92 DIODE SLA-570LT3F
< CONNECTOR > < IC >
CN7102 *1-564-518-11 PLUG, CONNECTOR 3P IC7150 8-749-014-59 IC TSOP1740KS1

< RESISTOR >
< SOCKET >
R7150 1-249-409-11 CARBON 220 5% 1/4W
J7900 1-794-442-11 TERMINAL BLOCK (LIGHT ANGLE),S R7151 1-249-411-11 CARBON 330 5% 1/4W
J7925 1-785-448-11 JACK
*A-1620-132-A B2 Board, Complete
< COIL >
< CAPACITOR >
L7925 1-414-183-41 INDUCTOR 10UH
L7926 1-414-183-41 INDUCTOR 10UH C3300 1-126-933-11 ELECT 100UF 20.00% 16V
C3301 1-126-933-11 ELECT 100UF 20.00% 16V
< RESISTOR > C3302 1-126-933-11 ELECT 100UF 20.00% 16V
C3307 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
R7100 1-249-425-11 CARBON 4.7K 5% 1/4W C3308 1-126-964-11 ELECT 10UF 20.00% 50V
R7101 1-249-429-11 CARBON 10K 5% 1/4W
R7103 1-249-429-11 CARBON 10K 5% 1/4W C3310 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
C3312 1-126-964-11 ELECT 10UF 20.00% 50V
R7105 1-249-421-11 CARBON 2.2K 5% 1/4W C3313 1-163-809-11 CERAMIC CHIP 0.047UF 10.00% 25V
R7900 1-535-143-61 LEAD, JUMPER (5.00MM)
C3319 1-126-964-11 ELECT 10UF 20.00% 50V
R7904 1-535-143-61 LEAD, JUMPER (5.00MM) C3320 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
R7905 1-249-417-11 CARBON 1K 5% 1/4W
R7906 1-535-143-61 LEAD, JUMPER (5.00MM) C3321 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
C3325 1-126-964-11 ELECT 10UF 20.00% 50V
96
for safety
Replace only with the part number
specified.
B2
C3327 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V < TRANSISTOR >
C3329 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V Q3300 1-801-806-11 TRANSISTOR DTC144EKA-T146
C3330 1-126-964-11 ELECT 10UF 20.00% 50V Q3303 8-729-216-22 TRANSISTOR 2SA1037K-T-146-R
C3331 1-107-823-11 CERAMIC CHIP 0.47UF 10.00% 16V Q3304 8-729-216-22 TRANSISTOR 2SA1037K-T-146-R
Q3305 8-729-216-22 TRANSISTOR 2SA1037K-T-146-R
C3333 1-126-964-11 ELECT 10UF 20.00% 50V
C3335 1-126-964-11 ELECT 10UF 20.00% 50V < RESISTOR >
C3339 1-163-231-11 CERAMIC CHIP 15PF 5.00% 50V R3302 1-216-025-91 RES-CHIP 100 5% 1/10W
R3305 1-216-295-91 SHORT 0
C3345 1-163-231-11 CERAMIC CHIP 15PF 5.00% 50V R3306 1-216-295-91 SHORT 0
C3346 1-163-231-11 CERAMIC CHIP 15PF 5.00% 50V R3307 1-216-295-91 SHORT 0
C3347 1-163-235-11 CERAMIC CHIP 22PF 5.00% 50V
C3351 1-126-964-11 ELECT 10UF 20.00% 50V R3314 1-216-061-00 RES-CHIP 3.3K 5% 1/10W
R3315 1-216-041-00 RES-CHIP 470 5% 1/10W
C3353 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V R3316 1-216-041-00 RES-CHIP 470 5% 1/10W
C3354 1-104-664-11 ELECT 47UF 20.00% 16V R3317 1-216-041-00 RES-CHIP 470 5% 1/10W
R3320 1-216-041-00 RES-CHIP 470 5% 1/10W
C3362 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V R3323 1-216-049-91 RES-CHIP 1K 5% 1/10W
C3363 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V R3324 1-216-071-00 RES-CHIP 8.2K 5% 1/10W
< CONNECTOR > R3325 1-216-049-91 RES-CHIP 1K 5% 1/10W

R3331 1-216-047-91 RES-CHIP 820 5% 1/10W
CN3100 1-695-301-11 CONNECTOR, BOARD TO BOARD 40P R3332 1-216-047-91 RES-CHIP 820 5% 1/10W
R3336 1-216-033-00 RES-CHIP 220 5% 1/10W
< FILTER > R3337 1-216-089-91 RES-CHIP 47K 5% 1/10W
FL3300 1-233-736-21 FILTER, EMI R3338 1-412-006-31 INDUCTOR CHIP 10UH

FL3301 1-233-736-21 FILTER, EMI R3339 1-412-006-31 INDUCTOR CHIP 10UH
FL3302 1-233-736-21 FILTER, EMI R3341 1-216-041-00 RES-CHIP 470 5% 1/10W
R3342 1-216-051-00 RES-CHIP 1.2K 5% 1/10W
< IC > R3343 1-216-051-00 RES-CHIP 1.2K 5% 1/10W
IC3300 8-759-991-41 IC L78L05ACZ-AP R3344 1-412-006-31 INDUCTOR CHIP 10UH

IC3301 8-759-295-09 IC TLC2932IPW-E20 R3348 1-216-021-00 RES-CHIP 68 5% 1/10W
IC3302 8-759-546-03 IC SAA4977H-518 R3350 1-216-051-00 RES-CHIP 1.2K 5% 1/10W
IC3304 8-759-546-72 IC SAA4956TJ-V1-518 R3360 1-216-025-91 RES-CHIP 100 5% 1/10W
R3361 1-216-025-91 RES-CHIP 100 5% 1/10W
< COIL >
R3364 1-216-295-91 SHORT 0
L3302 1-412-029-11 INDUCTOR CHIP 10UH R3370 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
L3305 1-412-029-11 INDUCTOR CHIP 10UH R3380 1-216-049-91 RES-CHIP 1K 5% 1/10W
L3306 1-412-029-11 INDUCTOR CHIP 10UH
R3383 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
L3309 1-412-029-11 INDUCTOR CHIP 10UH R3385 1-216-033-00 RES-CHIP 220 5% 1/10W
L3313 1-412-029-11 INDUCTOR CHIP 10UH R3389 1-216-049-91 RES-CHIP 1K 5% 1/10W
R3390 1-216-049-91 RES-CHIP 1K 5% 1/10W
97
for safety
B2 F1 A Replace only with the part number
specified.
R3391 1-216-049-91 RES-CHIP 1K 5% 1/10W C1126 1-162-568-11 CERAMIC CHIP 0.33UF 10.00% 16V
R3392 1-216-025-91 RES-CHIP 100 5% 1/10W C1127 1-137-194-81 MYLAR 0.47UF 5.00% 50V
R3393 1-216-025-91 RES-CHIP 100 5% 1/10W C1128 1-163-135-00 CERAMIC CHIP 560PF 5.00% 50V
R3396 1-216-295-91 SHORT 0 C1131 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V
R3397 1-216-295-91 SHORT 0 C1132 1-163-021-91 CERAMIC CHIP 0.01UF 10.00% 50V
C1134 1-126-961-11 ELECT 2.2UF 20.00% 50V
*A-1624-086-A F1 Board, Complete C1135 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
*4-374-846-01 COVER, CAPACITOR, CAP TYPE C1136 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
C1137 1-126-953-11 ELECT 2200UF 20.00% 35V
< CAPACITOR > C1138 1-126-953-11 ELECT 2200UF 20.00% 35V
C1140 1-111-216-91 ELECT 150UF 20.00% 63V
C7626 £ 1-136-527-12 FILM 0.47UF 20.00% 300V C1141 1-164-505-11 CERAMIC CHIP 2.2UF 16V
< CONNECTOR > C1142 1-130-777-00 MYLAR 0.1UF 5.00% 63V

CN7611 £ *1-580-843-11 PIN, CONNECTOR (POWER) C1152 1-137-194-81 MYLAR 0.47UF 5.00% 50V
CN7622 1-695-915-11 TAB (CONTACT) C1153 1-163-135-00 CERAMIC CHIP 560PF 5.00% 50V
CN7633 £ *1-580-843-11 PIN, CONNECTOR (POWER) C1154 1-115-339-11 CERAMIC CHIP 0.1UF 10.00% 50V
CN7655 1-695-915-11 TAB (CONTACT)
< FUSE > C1156 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V
F7626 £ 1-576-232-11 FUSE (H.B.C.) 5A/250V C1158 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
£ *1-533-725-11 HOLDER, FUSE (F7626) C1159 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
< RESISTOR > C1160 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
C1162 1-111-216-91 ELECT 150UF 20.00% 63V
R7626 £ 1-202-885-91 SOLID 1M 20% 1/2W C1163 1-164-505-11 CERAMIC CHIP 2.2UF 16V
R7627 £ 1-220-797-11 CEMENTED 0.47 5% 10W C1164 1-130-777-00 MYLAR 0.1UF 5.00% 63V
< TRANSFORMER >
C1178 1-126-964-11 ELECT 10UF 20.00% 50V
LF7627 £ 1-433-488-11 TRANSFORMER, LINE FILTER C1179 1-126-964-11 ELECT 10UF 20.00% 50V
C1180 1-126-952-11 ELECT 1000UF 20.00% 35V
< VARISTOR > C1181 1-126-952-11 ELECT 1000UF 20.00% 35V
VD7626 £ 1-803-830-31 VARISTOR (ERZV14D621)
*A-1631-115-A A Board, Complete C1184 1-107-823-11 CERAMIC CHIP 0.47UF 10.00% 16V
(KV-29FQ65B) C1226 1-104-661-91 ELECT 330UF 20.00% 16V
*A-1631-114-A A Board, Complete C1227 1-164-505-11 CERAMIC CHIP 2.2UF 16V
(KV-29FQ65E/29FQ65K) C1326 1-163-059-91 CERAMIC CHIP 0.01UF 10.00% 50V
A Board, Common Parts C1327 1-126-934-11 ELECT 220UF 20.00% 10V

4-382-854-11 SCREW (M3X10), P, SW (+)
C1603 1-126-933-11 ELECT 100UF 20.00% 16V
< CAPACITOR >
C1604 1-126-933-11 ELECT 100UF 20.00% 16V
C1100 1-104-664-11 ELECT 47UF 20.00% 25V
C1101 1-126-943-11 ELECT 2200UF 20.00% 25V
98
for safety
specified.
A
C1607 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V FB1901 1-414-553-11 FERRITE 0UH
C1608 1-126-934-11 ELECT 220UF 20.00% 16V FB1903 1-414-553-11 FERRITE 0UH
C1617 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V < IC >
< CONNECTOR > IC1126 8-759-544-25 IC TDA7482

IC1151 8-759-544-25 IC TDA7482
CN1111 *1-564-520-11 PLUG, CONNECTOR 5P IC1176 8-759-333-24 IC LM1876TF
CN1200 1-695-298-11 CONNECTOR, BOARD TO BOARD 40P IC1400 8-752-072-94 IC CXA1875AM-T4
CN1401 1-695-298-11 CONNECTOR, BOARD TO BOARD 40P IC1601 8-759-574-76 IC KA78R05-SYDTU
CN1600 1-900-903-64 CONNECTOR ASSY 20P
CN1601 1-900-903-64 CONNECTOR ASSY 20P IC1602 8-759-574-76 IC KA78R05-SYDTU
IC1604 8-759-544-13 IC KA78R09-YDTU
CN1602 1-900-903-64 CONNECTOR ASSY 20P IC1605 8-759-574-75 IC KA78R33-YDTU
CN1702 *1-564-506-11 PLUG, CONNECTOR 3P < COIL >
CN1703 1-764-334-11 PLUG, CONNECTOR 11P
CN1801 1-695-299-11 CONNECTOR, BOARD TO BOARD 50P L1126 1-416-857-11 INDUCTOR 65UH
L1127 1-414-158-11 INDUCTOR 2.2UH
CN1802 *1-564-506-11 PLUG, CONNECTOR 3P L1128 1-414-158-11 INDUCTOR 2.2UH
CN1901 1-695-298-11 CONNECTOR, BOARD TO BOARD 40P L1151 1-416-857-11 INDUCTOR 65UH
L1326 1-414-183-41 INDUCTOR 10UH
< DIODE >
< TRANSISTOR >
D1100 8-719-914-43 DIODE DAN202K-T-146
D1101 8-719-914-44 DIODE DAP202K-T-146 Q1100 8-729-026-49 TRANSISTOR 2SA1037AK-T146-R
D1102 8-719-914-43 DIODE DAN202K-T-146 Q1101 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R
Q1204 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R
D1201 8-719-976-96 DIODE UDZ-TE-17-4.7B
D1401 8-719-056-82 DIODE UDZ-TE-17-6.2B Q1226 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R
D1402 8-719-056-82 DIODE UDZ-TE-17-6.2B Q1227 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R
D1405 8-719-914-44 DIODE DAP202K-T-146 Q1229 8-729-027-38 TRANSISTOR DTA144EKA-T146
Q1327 8-729-026-49 TRANSISTOR 2SA1037AK-T146-R
D1407 8-719-069-55 DIODE UDZS-TE17-5.6B
D1408 8-719-069-55 DIODE UDZS-TE17-5.6B Q1328 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R
D1626 8-719-914-43 DIODE DAN202K-T-146 Q1329 8-729-026-49 TRANSISTOR 2SA1037AK-T146-R
< FERRITE BEAD > < RESISTOR >
FB1126 1-535-143-61 LEAD, JUMPER (5.00MM) JR1203 1-216-296-91 SHORT 0

FB1127 1-410-397-21 FERRITE 1.1UH JR1204 1-216-296-91 SHORT 0
FB1151 1-535-143-61 LEAD, JUMPER (5.00MM) JR1601 1-216-296-91 SHORT 0
FB1152 1-410-397-21 FERRITE 1.1UH
99
for safety
A M1 Replace only with the part number
specified.
R1001 1-216-295-91 SHORT 0 R1334 1-216-069-00 RES-CHIP 6.8K 5% 1/10W

R1002 1-216-295-91 SHORT 0 R1335 1-216-025-91 RES-CHIP 100 5% 1/10W

R1100 1-216-025-91 RES-CHIP 100 5% 1/10W R1340 1-216-043-91 RES-CHIP 560 5% 1/10W
R1101 1-216-057-00 RES-CHIP 2.2K 5% 1/10W R1342 1-216-073-00 RES-CHIP 10K 5% 1/10W
R1103 1-216-089-91 RES-CHIP 47K 5% 1/10W R1403 1-216-295-91 SHORT 0
R1104 1-216-296-91 SHORT 0 R1404 1-216-295-91 SHORT 0
R1126 1-216-631-11 METAL CHIP 150 0.5% 1/10W R1405 1-216-025-91 RES-CHIP 100 5% 1/10W
R1127 1-216-073-00 RES-CHIP 10K 5% 1/10W R1407 1-216-025-91 RES-CHIP 100 5% 1/10W
R1153 1-216-041-00 RES-CHIP 470 5% 1/10W R1411 1-216-295-91 SHORT 0

R1176 1-216-063-91 RES-CHIP 3.9K 5% 1/10W R1412 1-216-295-91 SHORT 0
R1179 1-216-357-00 METAL OXIDE 4.7 5% 1W R1601 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
R1180 1-216-081-00 RES-CHIP 22K 5% 1/10W R1602 1-216-691-11 METAL CHIP 47K 0.5% 1/10W
R1182 1-216-081-00 RES-CHIP 22K 5% 1/10W R1605 1-216-049-91 RES-CHIP 1K 5% 1/10W

R1183 1-216-045-00 RES-CHIP 680 5% 1/10W R1609 1-216-089-91 RES-CHIP 47K 5% 1/10W
R1184 1-216-089-91 RES-CHIP 47K 5% 1/10W R1610 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
R1185 1-216-089-91 RES-CHIP 47K 5% 1/10W R1616 1-216-304-11 RES-CHIP 3.3 5% 1/10W
R1201 1-216-089-91 RES-CHIP 47K 5% 1/10W R1617 1-216-304-11 RES-CHIP 3.3 5% 1/10W

R1204 1-216-071-00 RES-CHIP 8.2K 5% 1/10W R1622 1-216-029-00 RES-CHIP 150 5% 1/10W
R1208 1-216-089-91 RES-CHIP 47K 5% 1/10W A Board, Variant Parts KV-29FQ65B/29FQ65E/29FQ65K

R1209 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
R1210 1-216-089-91 RES-CHIP 47K 5% 1/10W < TUNER >
R1227 1-216-073-00 RES-CHIP 10K 5% 1/10W
R1228 1-216-073-00 RES-CHIP 10K 5% 1/10W TU1326 1-693-339-11 TUNER/VIF(FR) (KV-29FQ65B)
R1229 1-216-073-00 RES-CHIP 10K 5% 1/10W
R1230 1-216-055-00 RES-CHIP 1.8K 5% 1/10W *A-1634-057-A M1 Board, Complete
R1232 1-216-295-91 SHORT 0
R1233 1-216-049-91 RES-CHIP 1K 5% 1/10W
< CAPACITOR >
R1326 1-216-025-91 RES-CHIP 100 5% 1/10W
R1327 1-216-025-91 RES-CHIP 100 5% 1/10W
R1328 1-216-073-00 RES-CHIP 10K 5% 1/10W
R1329 1-216-025-91 RES-CHIP 100 5% 1/10W
C9104 1-104-664-11 ELECT 47UF 20.00% 25V
R1330 1-216-041-00 RES-CHIP 470 5% 1/10W
R1331 1-216-041-00 RES-CHIP 470 5% 1/10W
R1332 1-216-041-00 RES-CHIP 470 5% 1/10W
R1333 1-216-075-00 RES-CHIP 12K 5% 1/10W
100
for safety
specified.
M1
C9113 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V D9103 8-719-988-61 DIODE 1SS355TE-17
C9114 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V D9104 8-719-056-83 DIODE UDZ-TE-17-6.8B
C9115 1-115-340-11 CERAMIC CHIP 0.22UF 10.00% 25V D9105 8-719-914-43 DIODE DAN202K-T-146
C9117 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V D9107 8-719-025-31 DIODE 02CZ5.6-TE85L
C9118 1-104-664-11 ELECT 47UF 20.00% 25V
< FILTER >
C9121 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V FL9101 1-236-071-11 ENCAPSULATED COMPONENT
C9122 1-115-340-11 CERAMIC CHIP 0.22UF 10.00% 25V FL9500 1-236-071-11 ENCAPSULATED COMPONENT
C9123 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V FL9501 1-236-071-11 ENCAPSULATED COMPONENT
< IC >
C9126 1-163-105-00 CERAMIC CHIP 33PF 5.00% 50V IC9100 8-759-988-13 IC LM393PS-E20
C9127 1-163-105-00 CERAMIC CHIP 33PF 5.00% 50V IC9104 8-759-259-18 IC MB3793-42PNF-ER
C9128 1-163-105-00 CERAMIC CHIP 33PF 5.00% 50V IC9105 8-759-544-30 IC SAB-C161R1-LM
C9129 1-163-105-00 CERAMIC CHIP 33PF 5.00% 50V IC9107 8-759-395-27 IC TC55257DFTL-70V-EL
IC9108 8-759-564-06 IC M24C32-MN6T
C9131 1-163-105-00 CERAMIC CHIP 33PF 5.00% 50V IC9109 8-759-597-95 IC M27C800-100K1-AE513
C9132 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V IC9110 8-759-559-96 IC HEF4094BT
C9400 1-115-340-11 CERAMIC CHIP 0.22UF 10.00% 25V IC9500 8-759-991-85 IC 74F00SJX
C9500 1-104-664-11 ELECT 47UF 20.00% 25V IC9501 8-759-666-17 IC MSM5116400D-60SJR1
IC9502 8-759-665-84 IC SDA5275-3PC02-22
C9502 1-104-664-11 ELECT 47UF 20.00% 25V
C9503 1-126-964-11 ELECT 10UF 20.00% 50V < COIL >
C9505 1-104-665-11 ELECT 100UF 20.00% 25V L9400 1-412-029-11 INDUCTOR CHIP 10UH
C9506 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V L9401 1-412-029-11 INDUCTOR CHIP 10UH
C9509 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V Q9100 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R
C9510 1-115-340-11 CERAMIC CHIP 0.22UF 10.00% 25V Q9101 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R
C9511 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V Q9102 8-729-216-22 TRANSISTOR 2SA1037K-T-146-R
C9514 1-163-235-11 CERAMIC CHIP 22PF 5.00% 50V Q9106 8-729-027-46 TRANSISTOR DTC114YKA-T146
Q9109 8-729-027-46 TRANSISTOR DTC114YKA-T146
C9519 1-126-964-11 ELECT 10UF 20.00% 50V Q9500 8-729-216-22 TRANSISTOR 2SA1037K-T-146-R
C9520 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V Q9501 8-729-216-22 TRANSISTOR 2SA1037K-T-146-R
Q9502 8-729-216-22 TRANSISTOR 2SA1037K-T-146-R
< CONNECTOR > Q9503 1-801-806-11 TRANSISTOR DTC144EKA-T146
Q9504 1-801-806-11 TRANSISTOR DTC144EKA-T146
CN9101 1-695-301-11 CONNECTOR, BOARD TO BOARD 40P
< RESISTOR >
< DIODE >
R9100 1-216-073-00 RES-CHIP 10K 5% 1/10W
D9100 8-719-988-61 DIODE 1SS355TE-17 R9101 1-216-033-00 RES-CHIP 220 5% 1/10W
101
for safety
M1 Replace only with the part number
specified.
R9135 1-216-295-91 SHORT 0 R9506 1-216-073-00 RES-CHIP 10K 5% 1/10W


R9168 1-216-069-00 RES-CHIP 6.8K 5% 1/10W R9526 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
102
for safety
specified.
M1 C
< CRYSTAL > < CONNECTOR >
X9101 1-781-107-21 VIBRATOR, SERAMIC CN5400 1-564-511-11 PLUG, CONNECTOR 8P

X9500 1-760-551-21 VIBRATOR, CERAMIC CN5511 1-695-915-11 TAB (CONTACT)
CN5600 1-508-766-00 PIN, CONNECTOR (5MM PITCH) 4P
*A-1638-139-A C Board, Complete
< DIODE >
4-382-854-11 SCREW (M3X10), P, SW (+)
D5300 8-719-911-19 DIODE 1SS119-25TD
< CAPACITOR > D5302 8-719-901-83 DIODE 1SS83TD
D5325 8-719-911-19 DIODE 1SS119-25TD
C5301 1-163-075-00 CERAMIC CHIP 0.047UF 50V D5327 8-719-901-83 DIODE 1SS83TD
C5302 1-128-528-11 ELECT 470UF 20.00% 16V D5350 8-719-911-19 DIODE 1SS119-25TD
C5303 1-163-087-00 CERAMIC CHIP 4PF 0.25PF 50V
C5304 1-107-967-11 ELECT 1UF 20.00% 400V D5351 8-719-991-33 DIODE 1SS133T-77
C5305 1-136-207-11 MYLAR 0.047UF 10.00% 400V D5353 8-719-901-83 DIODE 1SS83TD
D5375 8-719-991-33 DIODE 1SS133T-77
C5306 1-163-017-00 CERAMIC CHIP 0.0047UF 10.00% 50V D5376 8-719-991-33 DIODE 1SS133T-77
C5307 1-163-233-11 CERAMIC CHIP 18PF 5.00% 50V D5377 8-719-908-03 DIODE GP08DPKG23
C5309 1-163-035-00 CERAMIC CHIP 0.047UF 50V D5378 8-719-921-88 DIODE MTZJ-T-77-13B
C5310 1-163-113-00 CERAMIC CHIP 68PF 5.00% 50V D5379 8-719-982-96 DIODE MTZJ-T-77-2.2A
D5380 8-719-982-96 DIODE MTZJ-T-77-2.2A
C5325 1-163-087-00 CERAMIC CHIP 4PF 0.25PF 50V D5381 8-719-031-34 DIODE RGP02-20EG23
C5328 1-128-528-11 ELECT 470UF 20.00% 16V < IC >
C5329 1-107-967-11 ELECT 1UF 20.00% 400V
C5330 1-136-207-11 MYLAR 0.047UF 10.00% 400V IC5300 8-759-360-83 IC TDA6111Q/N4
IC5325 8-759-360-83 IC TDA6111Q/N4
C5331 1-163-089-00 CERAMIC CHIP 6PF 0.50PF 50V IC5350 8-759-360-83 IC TDA6111Q/N4
C5333 1-163-035-00 CERAMIC CHIP 0.047UF 50V < SOCKET >
C5350 1-107-907-11 ELECT 22UF 20.00% 50V J5375 £ 1-540-071-22 SOCKET, CRT
C5351 1-163-087-00 CERAMIC CHIP 4PF 0.25PF 50V < COIL >
C5353 1-163-075-00 CERAMIC CHIP 0.047UF 50V L5300 1-408-591-11 INDUCTOR 1UH
C5354 1-128-528-11 ELECT 470UF 20.00% 16V L5325 1-408-591-11 INDUCTOR 1UH
L5375 1-410-671-31 INDUCTOR 47UH
C5356 1-136-207-11 MYLAR 0.047UF 10.00% 400V L5376 1-532-637-00 LINK, IC 1A/150V
C5358 1-163-087-00 CERAMIC CHIP 4PF 0.25PF 50V L5377 1-414-183-41 INDUCTOR 10UH
C5359 1-163-035-00 CERAMIC CHIP 0.047UF 50V
C5360 1-163-113-00 CERAMIC CHIP 68PF 5.00% 50V < TRANSISTOR >
C5375 1-107-902-11 ELECT 1UF 20.00% 50V Q5300 8-729-255-12 TRANSISTOR 2SC2551O-TPE2
C5376 1-102-106-00 CERAMIC 100PF 10.00% 50V Q5301 8-729-216-22 TRANSISTOR 2SB709A-QRS-TX
C5377 1-104-331-11 CERAMIC 0.0022UF 10.00% 1KV Q5325 8-729-255-12 TRANSISTOR 2SC2551O-TPE2
C5378 1-162-116-00 CERAMIC 680PF 10.00% 2KV Q5326 8-729-216-22 TRANSISTOR 2SB709A-QRS-TX
C5379 1-162-114-00 CERAMIC 0.0047UF 2KV Q5350 8-729-029-56 TRANSISTOR DTA144ESA-TP
C5380 1-107-652-11 ELECT 10UF 20.00% 250V Q5351 8-729-255-12 TRANSISTOR 2SC2551O-TPE2
C5381 1-117-214-11 CERAMIC 0.001UF 10.00% 2KV Q5352 8-729-216-22 TRANSISTOR 2SB709A-QRS-TX
C5382 1-162-114-00 CERAMIC 0.0047UF 2KV Q5375 8-729-119-78 TRANSISTOR 2SC1740S-RT
103
for safety
C D1 Replace only with the part number
specified.
Q5376 8-729-026-39 TRANSISTOR 2SA933AS-RT R5382 1-202-549-00 SOLID 100 20% 1/2W
R5383 1-216-399-00 METAL OXIDE 6.8 5% 3W
< RESISTOR > R5384 1-216-399-00 METAL OXIDE 6.8 5% 3W
R5385 1-202-549-00 SOLID 100 20% 1/2W
R5300 1-249-417-11 CARBON 1K 5% 1/4W R5386 1-202-884-11 SOLID 820K 20% 1/2W
R5301 1-247-807-31 CARBON 100 5% 1/4W
R5302 1-535-143-61 LEAD, JUMPER (5.00MM) R5387 1-202-884-11 SOLID 820K 20% 1/2W
R5303 1-216-659-11 METAL CHIP 2.2K 0.5% 1/10W R5388 1-215-911-11 METAL OXIDE 100 5% 3W
R5304 1-202-557-00 SOLID 220 20% 1/2W R5389 1-249-417-11 CARBON 1K 5% 1/4W
R5305 1-215-929-11 METAL OXIDE 100K 5% 3W < VARIABLE RESISTOR >

R5306 1-249-424-11 CARBON 3.9K 5% 1/4W
R5307 1-249-433-11 CARBON 22K 5% 1/4W RV5375 1-241-656-21 RES, ADJ, METAL FILM 110M
R5308 1-216-057-00 RES-CHIP 2.2K 5% 1/10W RV5376 1-230-641-11 RES, ADJ, METAL GLAZE 2.2M
R5309 1-216-658-11 METAL CHIP 2K 0.5% 1/10W
*A-1640-380-A D1 Board, Complete
R5310 1-216-059-00 RES-CHIP 2.7K 5% 1/10W
R5325 1-249-417-11 CARBON 1K 5% 1/4W 4-202-554-01 HOLDER, HV CABLE
R5326 1-247-807-31 CARBON 100 5% 1/4W 4-382-854-11 SCREW (M3X10), P, SW (+)
R5327 1-535-143-61 LEAD, JUMPER (5.00MM)
R5328 1-216-659-11 METAL CHIP 2.2K 0.5% 1/10W < CAPACITOR >
R5329 1-202-557-00 SOLID 220 20% 1/2W C6100 1-136-165-00 MYLAR 0.1UF 5.00% 50V
R5330 1-215-929-11 METAL OXIDE 100K 5% 3W C6101 1-136-165-00 MYLAR 0.1UF 5.00% 50V
R5331 1-249-424-11 CARBON 3.9K 5% 1/4W C6102 1-136-165-00 MYLAR 0.1UF 5.00% 50V
R5333 1-216-057-00 RES-CHIP 2.2K 5% 1/10W C6104 1-163-205-00 CERAMIC CHIP 0.001UF 5.00% 50V
R5334 1-216-059-00 RES-CHIP 2.7K 5% 1/10W C6105 1-126-967-11 ELECT 47UF 20.00% 50V
R5335 1-216-658-11 METAL CHIP 2K 0.5% 1/10W C6106 1-163-133-00 CERAMIC CHIP 470PF 5.00% 50V
R5351 1-247-807-31 CARBON 100 5% 1/4W C6109 1-126-967-11 ELECT 47UF 20.00% 50V
R5352 1-249-416-11 CARBON 820 5% 1/4W C6110 1-126-967-11 ELECT 47UF 20.00% 50V
R5355 1-535-143-61 LEAD, JUMPER (5.00MM) C6114 1-126-964-11 ELECT 10UF 20.00% 50V
R5356 1-216-659-11 METAL CHIP 2.2K 0.5% 1/10W C6115 1-163-005-11 CERAMIC CHIP 470PF 10.00% 50V
R5357 1-202-557-00 SOLID 220 20% 1/2W C6116 1-163-275-11 CERAMIC CHIP 0.001UF 5.00% 50V
R5358 1-215-929-11 METAL OXIDE 100K 5% 3W C6117 1-163-275-11 CERAMIC CHIP 0.001UF 5.00% 50V
R5361 1-249-431-11 CARBON 15K 5% 1/4W C6121 1-126-964-11 ELECT 10UF 20.00% 50V
R5363 1-216-059-00 RES-CHIP 2.7K 5% 1/10W C6125 1-163-017-00 CERAMIC CHIP 0.0047UF 10.00% 50V
R5364 1-216-658-11 METAL CHIP 2K 0.5% 1/10W C6126 1-163-809-11 CERAMIC CHIP 0.047UF 10.00% 25V
R5378 1-249-429-11 CARBON 10K 5% 1/4W C6130 1-163-259-91 CERAMIC CHIP 220PF 5.00% 50V
R5379 1-249-438-11 CARBON 56K 5% 1/4W C6131 1-126-964-11 ELECT 10UF 20.00% 50V
R5380 1-249-433-11 CARBON 22K 5% 1/4W C6132 1-163-259-91 CERAMIC CHIP 220PF 5.00% 50V
104
for safety
specified.
D1
C6134 1-102-935-00 CERAMIC 2PF 0.25PF 50V C6381 1-126-960-11 ELECT 1UF 20.00% 50V
C6199 1-163-229-11 CERAMIC CHIP 12PF 5.00% 50V C6385 1-104-664-11 ELECT 47UF 20.00% 25V
C6207 1-126-967-11 ELECT 47UF 20.00% 50V C6386 1-104-664-11 ELECT 47UF 20.00% 25V
C6209 1-163-133-00 CERAMIC CHIP 470PF 5.00% 50V C6389 1-126-964-11 ELECT 10UF 20.00% 50V
C6210 1-163-009-11 CERAMIC CHIP 0.001UF 10.00% 50V C6392 1-104-664-11 ELECT 47UF 20.00% 25V
C6251 1-216-295-91 SHORT 0 C6402 1-107-714-11 ELECT 10UF 20.00% 50V
C6253 1-115-339-11 CERAMIC CHIP 0.1UF 10.00% 50V C6407 1-136-161-00 MYLAR 0.047UF 5.00% 50V
C6254 1-136-177-00 MYLAR 1UF 5.00% 50V C6408 1-136-161-00 MYLAR 0.047UF 5.00% 50V
C6255 1-136-177-00 MYLAR 1UF 5.00% 50V C6409 1-126-964-11 ELECT 10UF 20.00% 50V
C6256 1-163-117-00 CERAMIC CHIP 100PF 5.00% 50V C6420 1-136-165-00 MYLAR 0.1UF 5.00% 50V
C6257 1-115-339-11 CERAMIC CHIP 0.1UF 10.00% 50V C6421 1-136-165-00 MYLAR 0.1UF 5.00% 50V
C6259 1-110-501-11 CERAMIC CHIP 0.33UF 10.00% 16V < CONNECTOR >
C6260 1-104-664-11 ELECT 47UF 20.00% 16V CN6502 *1-564-509-11 PLUG, CONNECTOR 6P
C6261 1-115-339-11 CERAMIC CHIP 0.1UF 10.00% 50V CN6600 *1-508-786-00 PIN, CONNECTOR (5MM PITCH) 2P
C6262 1-136-165-00 MYLAR 0.1UF 5.00% 50V CN6601 1-695-302-11 CONNECTOR, BOARD TO BOARD 50P
C6263 1-163-109-00 CERAMIC CHIP 47PF 5.00% 50V CN6622 *1-568-878-81 PLUG, CONNECTOR 3P
C6264 1-126-964-11 ELECT 10UF 20.00% 50V CN6623 *1-568-878-51 PIN, CONNECTOR 3P
C6306 1-126-964-11 ELECT 10UF 20.00% 50V CN6633 *1-568-878-61 PLUG, CONNECTOR 3P
C6350 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V < DIODE >
C6351 1-126-967-11 ELECT 47UF 20.00% 50V
D6104 8-719-914-43 DIODE DAN202K-T-146
C6354 1-136-159-00 MYLAR 0.033UF 5.00% 50V D6105 8-719-914-43 DIODE DAN202K-T-146
C6355 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V D6107 8-719-914-43 DIODE DAN202K-T-146
C6356 1-163-809-11 CERAMIC CHIP 0.047UF 10.00% 25V D6108 8-719-921-40 DIODE MTZJ-T-77-4.7B
C6357 1-136-165-00 MYLAR 0.1UF 5.00% 50V
D6128 8-719-914-43 DIODE DAN202K-T-146
C6360 1-107-714-11 ELECT 10UF 20.00% 50V D6198 1-535-143-61 LEAD, JUMPER (5.00MM)
C6361 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V D6253 8-719-911-19 DIODE 1SS119-25TD
C6363 1-104-665-11 ELECT 100UF 20.00% 25V D6254 1-535-143-61 LEAD, JUMPER (5.00MM)
D6255 8-719-914-43 DIODE DAN202K-T-146
C6364 1-136-347-11 FILM 0.0047UF 5.00% 630V D6350 8-719-914-43 DIODE DAN202K-T-146
C6370 1-136-347-11 FILM 0.0047UF 5.00% 630V D6353 8-719-987-87 DIODE ERA82-004TP1
D6354 8-719-914-43 DIODE DAN202K-T-146
C6375 1-102-110-00 CERAMIC 220PF 10.00% 50V D6359 8-719-302-43 DIODE RGP10GPKG23
C6376 1-104-664-11 ELECT 47UF 20.00% 16V
C6377 1-128-551-11 ELECT 22UF 20.00% 25V D6401 8-719-914-43 DIODE DAN202K-T-146
D6402 8-719-982-03 DIODE MTZJ-T-77-3.6A
C6378 1-115-339-11 CERAMIC CHIP 0.1UF 10.00% 50V D6403 8-719-921-63 DIODE MTZJ-T-77-7.5B
105
for safety
D1 Replace only with the part number
specified.
D6405 8-719-921-63 DIODE MTZJ-T-77-7.5B Q6128 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R

< IC > Q6201 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R
IC6100 8-759-450-95 IC LM393N Q6250 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R
IC6101 8-759-450-95 IC LM393N
IC6102 8-759-638-79 IC NJM3404AD-W Q6251 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R
IC6103 8-759-450-95 IC LM393N Q6252 8-729-026-49 TRANSISTOR 2SA1037AK-T146-R
IC6250 8-759-478-66 IC CXA8070P Q6253 8-729-045-04 TRANSISTOR 2SC5511
Q6254 8-729-045-05 TRANSISTOR 2SA2005
IC6251 8-759-903-16 IC LM318P Q6350 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R
IC6302 8-752-072-94 IC CXA1875AM-T4
IC6350 8-759-008-70 IC LM358N Q6351 8-729-119-78 TRANSISTOR 2SC1740S-RT
IC6351 8-759-450-95 IC LM393N Q6352 8-729-140-97 TRANSISTOR 2SB734-T-3
IC6352 8-759-450-95 IC LM393N Q6353 8-729-140-97 TRANSISTOR 2SB734-T-3
IC6353 8-759-231-53 IC L7805CV Q6356 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R
IC6354 8-759-325-48 IC CA0005AD
IC6355 8-759-008-70 IC LM358N Q6358 8-729-038-83 TRANSISTOR 2SK2251-01-F19
IC6356 8-759-822-38 IC LA6510 Q6401 1-801-806-11 TRANSISTOR DTC144EKA-T146
Q6402 1-801-806-11 TRANSISTOR DTC144EKA-T146
< FILTER > Q6403 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R
LF6350 1-406-989-21 INDUCTOR 10MH
LF6351 1-406-989-21 INDUCTOR 10MH Q6405 8-729-026-49 TRANSISTOR 2SA1037AK-T146-R
< IC LINK > Q6465 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R
PS6376 £ 1-532-637-00 LINK, IC 1A/150V < RESISTOR >
< TRANSISTOR > R6100 1-216-033-00 RES-CHIP 220 5% 1/10W

R6101 1-216-033-00 RES-CHIP 220 5% 1/10W
Q6100 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R R6102 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
Q6104 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R R6105 1-216-049-91 RES-CHIP 1K 5% 1/10W
R6106 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
Q6105 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R R6107 1-216-659-11 METAL CHIP 2.2K 0.5% 1/10W
Q6106 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R R6108 1-216-659-11 METAL CHIP 2.2K 0.5% 1/10W
Q6107 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R R6109 1-216-683-11 METAL CHIP 22K 0.5% 1/10W
Q6110 8-729-026-49 TRANSISTOR 2SA1037AK-T146-R R6110 1-216-683-11 METAL CHIP 22K 0.5% 1/10W
R6111 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
Q6120 8-729-026-49 TRANSISTOR 2SA1037AK-T146-R R6115 1-216-089-91 RES-CHIP 47K 5% 1/10W
R6116 1-216-089-91 RES-CHIP 47K 5% 1/10W
Q6127 8-729-026-49 TRANSISTOR 2SA1037AK-T146-R R6120 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
R6121 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
106
for safety
specified.
D1
R6125 1-216-057-00 RES-CHIP 2.2K 5% 1/10W R6191 1-215-925-11 METAL OXIDE 22K 5% 3W
R6126 1-216-037-00 RES-CHIP 330 5% 1/10W R6192 1-216-665-11 METAL CHIP 3.9K 0.5% 1/10W
R6127 1-216-663-11 METAL CHIP 3.3K 0.5% 1/10W R6194 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
R6128 1-216-691-11 METAL CHIP 47K 0.5% 1/10W R6195 1-216-683-11 METAL CHIP 22K 0.5% 1/10W
R6129 1-216-691-11 METAL CHIP 47K 0.5% 1/10W R6196 1-249-377-11 CARBON 0.47 5% 1/4W
R6130 1-218-768-11 METAL CHIP 470K 0.5% 1/10W R6198 1-216-081-00 RES-CHIP 22K 5% 1/10W
R6135 1-163-021-91 CERAMIC CHIP 0.01 10.0% 50V R6207 1-216-099-00 RES-CHIP 120K 5% 1/10W
R6137 1-216-691-11 METAL CHIP 47K 0.5% 1/10W R6210 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
R6140 1-216-057-00 RES-CHIP 2.2K 5% 1/10W R6215 1-216-683-11 METAL CHIP 22K 0.5% 1/10W
R6142 1-216-672-11 METAL CHIP 7.5K 0.5% 1/10W R6217 1-216-073-00 RES-CHIP 10K 5% 1/10W

R6146 1-216-667-11 METAL CHIP 4.7K 0.5% 1/10W R6256 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
R6149 1-216-025-91 RES-CHIP 100 5% 1/10W R6258 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
R6159 1-216-295-91 SHORT 0 R6262 1-260-321-71 CARBON 270 5% 1/2W

R6161 1-216-673-11 METAL CHIP 8.2K 0.5% 1/10W R6264 1-216-025-91 RES-CHIP 100 5% 1/10W
R6169 1-216-699-91 METAL CHIP 100K 0.5% 1/10W R6269 1-216-667-11 METAL CHIP 4.7K 0.5% 1/10W
R6179 1-216-295-91 SHORT 0 R6280 1-212-849-00 FUSIBLE 4.7 5% 1/4W
R6180 1-216-057-00 RES-CHIP 2.2K 5% 1/10W R6281 1-212-849-00 FUSIBLE 4.7 5% 1/4W
R6182 1-216-089-91 RES-CHIP 47K 5% 1/10W R6282 1-215-886-11 METAL OXIDE 100 5% 2W
R6183 1-216-057-00 RES-CHIP 2.2K 5% 1/10W R6283 1-216-393-00 METAL OXIDE 2.2 5% 3W
107
for safety
D1 Replace only with the part number
specified.
R6313 1-216-295-91 SHORT 0 R6401 1-216-295-91 SHORT 0
R6323 1-216-049-91 RES-CHIP 1K 5% 1/10W R6403 1-216-661-11 METAL CHIP 2.7K 0.5% 1/10W
R6324 1-216-025-91 RES-CHIP 100 5% 1/10W R6404 1-216-683-11 METAL CHIP 22K 0.5% 1/10W
R6363 1-216-675-91 METAL CHIP 10K 0.5% 1/10W R6421 1-216-637-11 METAL CHIP 270 0.5% 1/10W
R6364 1-216-057-00 RES-CHIP 2.2K 5% 1/10W R6422 1-216-639-11 METAL CHIP 330 0.5% 1/10W
R6371 1-216-473-11 METAL OXIDE 56 5% 3W R6431 1-216-121-91 RES-CHIP 1M 5% 1/10W
R6374 1-216-689-11 METAL CHIP 39K 0.5% 1/10W R6437 1-249-422-11 CARBON 2.7K 5% 1/4W
R6375 1-216-041-00 RES-CHIP 470 5% 1/10W R6438 1-249-421-11 CARBON 2.2K 5% 1/4W
R6379 1-216-295-91 SHORT 0 R6441 1-216-675-91 METAL CHIP 10K 0.5% 1/10W
R6380 1-218-754-11 METAL CHIP 120K 0.5% 1/10W R6442 1-216-039-00 RES-CHIP 390 5% 1/10W

R6386 1-216-699-91 METAL CHIP 100K 0.5% 1/10W R6460 1-249-393-11 CARBON 10 5% 1/4W
R6387 1-216-677-11 METAL CHIP 12K 0.5% 1/10W R6461 1-249-411-11 CARBON 330 5% 1/4W
R6391 1-249-417-11 CARBON 1K 5% 1/4W R6462 1-249-406-11 CARBON 120 5% 1/4W
R6397 1-216-675-91 METAL CHIP 10K 0.5% 1/10W
108
for safety
specified.
E
*A-1640-381-A E Board, Complete C4371 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
C4377 1-126-960-11 ELECT 1UF 20.00% 50V
< CAPACITOR > C4518 1-162-638-11 CERAMIC CHIP 1UF 16V
C4316 1-104-664-11 ELECT 47UF 20.00% 25V
C4317 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V < CONNECTOR >
C4319 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V CN4101 1-695-301-11 CONNECTOR, BOARD TO BOARD 40P
C4320 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V CN4500 *1-564-511-11 PLUG, CONNECTOR 8P
CN4502 *1-568-878-51 PIN, CONNECTOR 3P
C4322 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V < DIODE >
C4325 1-163-093-00 CERAMIC CHIP 10PF 5.00% 50V D4304 8-719-923-60 DIODE MTZJ-T-77-9.1
C4329 1-126-963-11 ELECT 4.7UF 20.00% 50V D4305 8-719-923-60 DIODE MTZJ-T-77-9.1
D4311 8-719-914-43 DIODE DAN202K-T-146
C4331 1-126-959-11 ELECT 0.47UF 20.00% 50V D4313 8-719-401-63 DIODE MA3062M-TX
C4333 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V < FERRITE BEAD >
C4334 1-126-967-11 ELECT 47UF 20.00% 50V
FB4387 1-414-234-22 INDUCTOR CHIP 0UH
C4336 1-126-967-11 ELECT 47UF 20.00% 50V FB4388 1-414-234-22 INDUCTOR CHIP 0UH
C4338 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V FB4389 1-414-234-22 INDUCTOR CHIP 0UH
C4340 1-126-967-11 ELECT 47UF 20.00% 50V
C4342 1-163-021-91 CERAMIC CHIP 0.01UF 10.00% 50V < IC >
IC4301 8-752-090-88 IC CXA2100AQ-TL
C4345 1-126-967-11 ELECT 47UF 20.00% 50V < COIL >
C4347 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V L4301 1-414-183-41 INDUCTOR 10UH
L4303 1-414-183-41 INDUCTOR 10UH
L4309 1-414-186-31 INDUCTOR 33UH
C4357 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V Q4304 8-729-026-49 TRANSISTOR 2SA1037AK-T146-R
C4360 1-126-963-11 ELECT 4.7UF 20.00% 50V Q4310 8-729-026-49 TRANSISTOR 2SA1037AK-T146-R
C4363 1-126-967-11 ELECT 47UF 20.00% 50V Q4311 8-729-026-49 TRANSISTOR 2SA1037AK-T146-R
C4364 1-126-967-11 ELECT 47UF 20.00% 50V Q4312 8-729-026-49 TRANSISTOR 2SA1037AK-T146-R
C4366 1-163-059-91 CERAMIC CHIP 0.01UF 10.00% 50V Q4315 1-801-806-11 TRANSISTOR DTC144EKA-T146
C4370 1-126-967-11 ELECT 47UF 20.00% 50V Q4317 8-729-900-53 TRANSISTOR DTC114EKA-T146
109
for safety
E D Replace only with the part number
specified.
< RESISTOR > R4375 1-216-049-91 RES-CHIP 1K 5% 1/10W

R4376 1-216-049-91 RES-CHIP 1K 5% 1/10W
R4304 1-216-025-91 RES-CHIP 100 5% 1/10W
R4381 1-216-125-00 RES-CHIP 1.5M 5% 1/10W
R4309 1-216-045-00 RES-CHIP 680 5% 1/10W
R4388 1-216-031-00 RES-CHIP 180 5% 1/10W
R4333 1-216-073-00 RES-CHIP 10K 5% 1/10W
R4398 1-216-025-91 RES-CHIP 100 5% 1/10W
R4337 1-216-025-91 RES-CHIP 100 5% 1/10W R4507 1-216-129-00 RES-CHIP 2.2M 5% 1/10W
R4339 1-216-049-91 RES-CHIP 1K 5% 1/10W
R4519 1-216-073-00 RES-CHIP 10K 5% 1/10W
R4341 1-216-295-91 SHORT 0 R4520 1-216-295-91 SHORT 0
R4345 1-216-677-11 METAL CHIP 12K 0.5% 1/10W
R4346 1-216-681-11 METAL CHIP 18K 0.5% 1/10W < CRYSTAL >
R4347 1-216-025-91 RES-CHIP 100 5% 1/10W X4300 1-767-127-11 VIBRATOR, CERAMIC

R4348 1-216-025-91 RES-CHIP 100 5% 1/10W
R4350 1-216-025-91 RES-CHIP 100 5% 1/10W *A-1640-398-A D Board, Complete
R4354 1-216-675-91 METAL CHIP 10K 0.5% 1/10W
R4355 1-216-009-91 RES-CHIP 22 5% 1/10W 4-201-023-01 SPACER, INSULATING
4-202-373-01 SPRING, IC
R4356 1-216-009-91 RES-CHIP 22 5% 1/10W 4-382-854-11 SCREW (M3X10), P, SW (+)
R4357 1-216-009-91 RES-CHIP 22 5% 1/10W *4-931-401-01 HEAT SINK, V.OUT
R4358 1-216-071-00 RES-CHIP 8.2K 5% 1/10W
R4359 1-216-041-00 RES-CHIP 470 5% 1/10W < CAPACITOR >
R4360 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
C6600 £ 1-127-802-51 CERAMIC 10000PF 20.00% 250V
R4361 1-216-133-00 RES-CHIP 3.3M 5% 1/10W C6603 £ 1-126-933-11 ELECT 100UF 20.00% 16V
R4363 1-216-025-91 RES-CHIP 100 5% 1/10W C6604 £ 1-126-767-11 ELECT 1000UF 20.00% 16V
R4365 1-216-025-91 RES-CHIP 100 5% 1/10W C6605 £ 1-119-888-51 CERAMIC 2200PF 20.00% 250V
R4366 1-216-025-91 RES-CHIP 100 5% 1/10W C6606 £ 1-119-888-51 CERAMIC 2200PF 20.00% 250V
R4367 1-216-025-91 RES-CHIP 100 5% 1/10W
C6607 £ 1-136-518-12 FILM 0.33UF 20.00% 300V
R4370 1-216-089-91 RES-CHIP 47K 5% 1/10W C6608 £ 1-161-964-91 CERAMIC 0.0047UF 250V
R4371 1-216-069-00 RES-CHIP 6.8K 5% 1/10W C6609 £ 1-161-964-91 CERAMIC 0.0047UF 250V
R4374 1-216-049-91 RES-CHIP 1K 5% 1/10W
110
for safety
specified.
D
C6612 1-113-927-11 CERAMIC 10000PF 20.00% 250V C6672 1-104-664-11 ELECT 47UF 20.00% 16V
C6617 1-164-625-11 CERAMIC 680PF 10.00% 500V C6677 1-136-165-00 MYLAR 0.1UF 5.00% 50V
C6618 1-136-175-00 MYLAR 0.68UF 5.00% 50V C6679 1-130-495-00 MYLAR 0.1UF 5.00% 50V
C6619 1-137-194-91 MYLAR 0.47UF 5.00% 50V C6680 1-137-150-11 MYLAR 0.01UF 5.00% 50V
C6620 1-136-618-11 FILM 0.047UF 5.00% 1.25KV C6681 1-126-964-11 ELECT 10UF 20.00% 50V
C6621 1-136-175-00 MYLAR 0.68UF 5.00% 50V C6682 1-107-679-91 ELECT 10UF 20.00% 450V
C6622 1-164-625-11 CERAMIC 680PF 10.00% 500V C6700 1-102-129-00 CERAMIC 0.01UF 10.00% 50V
C6627 1-164-625-11 CERAMIC 680PF 10.00% 500V C6706 1-137-401-11 MYLAR 0.22UF 10.00% 100V
C6628 1-126-936-11 ELECT 3300UF 20.00% 16V C6707 1-129-702-00 MYLAR 0.001UF 10.00% 400V
C6630 1-110-626-11 ELECT 330UF 20.00% 160V C6709 1-102-129-00 CERAMIC 0.01UF 10.00% 50V
C6632 1-126-955-11 ELECT 4700UF 20.00% 35V C6727 1-102-228-00 CERAMIC 470PF 10.00% 500V
C6636 1-102-129-00 CERAMIC 0.01UF 10.00% 50V C6804 1-102-114-00 CERAMIC 470PF 10.00% 50V
C6637 1-102-129-00 CERAMIC 0.01UF 10.00% 50V C6805 1-102-114-00 CERAMIC 470PF 10.00% 50V
C6638 1-137-368-11 MYLAR 0.0047UF 5.00% 50V C6808 1-102-030-00 CERAMIC 330PF 10.00% 500V
C6639 1-102-228-00 CERAMIC 470PF 10.00% 500V C6809 1-102-030-00 CERAMIC 330PF 10.00% 500V
C6647 1-104-664-11 ELECT 47UF 20.00% 25V C6812 1-162-131-11 CERAMIC 220PF 10.00% 2KV
C6649 1-126-965-11 ELECT 22UF 20.00% 50V C6813 1-162-558-11 CERAMIC 100PF 10.00% 2KV
C6651 1-161-964-91 CERAMIC 0.0047UF 250V C6814 1-117-640-11 FILM 6800PF 3.00% 1.2KV
C6652 1-107-679-91 ELECT 10UF 20.00% 450V C6815 1-117-835-11 FILM 6200PF 3.00% 1.5KV
C6654 1-162-117-00 CERAMIC 100PF 10.00% 500V C6817 1-125-893-11 FILM 680PF 3.00% 1.5KV
C6655 1-107-974-11 CERAMIC 47PF 5.00% 2KV C6818 1-125-893-11 FILM 680PF 3.00% 1.5KV
C6658 1-104-665-11 ELECT 100UF 20.00% 25V C6824 1-107-846-11 FILM 0.1UF 5.00% 250V
C6659 1-104-665-11 ELECT 100UF 20.00% 25V C6825 1-115-514-11 FILM 0.22UF 5.00% 250V
C6661 1-117-753-11 ELECT(BLOCK) 470UF 20.00% 450V C6826 1-115-518-11 FILM 0.47UF 5.00% 250V
C6662 1-136-165-00 MYLAR 0.1UF 5.00% 50V C6827 1-115-511-11 FILM 0.12UF 5.00% 250V
C6664 1-136-153-00 MYLAR 0.01UF 5.00% 50V C6828 1-127-681-11 FILM MELF 10000PF 2% 100V
C6665 1-136-165-00 MYLAR 0.1UF 5.00% 50V C6829 1-127-680-11 FILM MELF 4700PF 2% 100V
C6670 1-136-165-00 MYLAR 0.1UF 5.00% 50V C6834 1-102-228-00 CERAMIC 470PF 10.00% 500V
111
for safety
D Replace only with the part number
specified.
C6836 1-123-024-21 ELECT 33UF 160V D6625 8-719-991-33 DIODE 1SS133T-77

C6837 1-106-375-12 MYLAR 0.022UF 10.00% 250V D6626 8-719-991-33 DIODE 1SS133T-77
C6840 1-137-150-11 MYLAR 0.01UF 5.00% 50V D6627 8-719-982-27 DIODE MTZJ-T-77-33C
C6841 1-104-664-11 ELECT 47UF 20.00% 16V D6628 8-719-109-97 DIODE MTZJ-T-77-6.8
C6844 1-115-513-21 FILM 0.18UF 5.00% 250V D6629 8-719-991-33 DIODE 1SS133T-77
C6851 1-162-131-11 CERAMIC 220PF 10.00% 2KV D6630 8-719-991-33 DIODE 1SS133T-77
C6852 1-162-129-00 CERAMIC 150PF 10.00% 2KV D6631 £ 8-719-991-33 DIODE 1SS133T-77
C6853 1-129-898-00 FILM 0.0022UF 5.00% 630V D6651 8-719-068-00 DIODE ERC04-06SE
C6855 1-136-205-11 MYLAR 0.022UF 10.00% 400V D6652 8-719-921-83 DIODE MTZJ-T-77-12A
C6856 1-102-030-00 CERAMIC 330PF 10.00% 500V D6653 8-719-063-73 DIODE D1NL20U-TR
C6857 1-130-785-11 MYLAR 0.47UF 10.00% 100V D6654 8-719-059-23 DIODE P6KE200AG23
C6861 1-130-471-00 MYLAR 0.001UF 5.00% 50V D6655 8-719-979-64 DIODE UF4005PKG23
C6862 1-130-471-00 MYLAR 0.001UF 5.00% 50V D6656 8-719-063-73 DIODE D1NL20U-TR
D6658 8-719-068-00 DIODE ERC04-06SE
< CONNECTOR > D6659 8-719-063-73 DIODE D1NL20U-TR
CN6100 1-785-802-11 PIN, CONNECTOR (WITH PWB) 20P D6676 8-719-991-33 DIODE 1SS133T-77
CN6101 1-785-802-11 PIN, CONNECTOR (WITH PWB) 20P D6677 8-719-921-40 DIODE MTZJ-T-77-4.7B
CN6102 1-785-802-11 PIN, CONNECTOR (WITH PWB) 20P D6678 8-719-921-40 DIODE MTZJ-T-77-4.7B
CN6500 1-508-766-00 PIN, CONNECTOR (5MM PITCH) 4P D6679 8-719-991-33 DIODE 1SS133T-77
CN6600 1-695-299-11 CONNECTOR, BOARD TO BOARD 50P D6681 8-719-991-33 DIODE 1SS133T-77
CN6611 *1-785-270-12 PIN, DY CONNECTOR (PC BOARD) D6700 8-719-200-02 DIODE ERA15-02TP1
CN6620 £ 1-508-765-00 PIN, CONNECTOR (5MM PITCH) 3P D6701 8-719-110-41 DIODE MTZJ-T-77-15B
CN6622 1-695-915-11 TAB (CONTACT) D6803 8-719-200-02 DIODE ERA15-02TP1
CN6644 £ *1-691-960-11 PIN, CONNECTOR (PC BOARD) 3P D6804 1-535-143-11 LEAD, JUMPER (10.00MM)
CN6655 1-695-915-11 TAB (CONTACT) D6805 8-719-302-43 DIODE RGP10GPKG23
CN6666 £ *1-508-786-00 PIN, CONNECTOR (5MM PITCH) 2P D6806 8-719-979-85 DIODE RGP15GPKG23
CN6700 £ *1-691-291-11 PIN, CONNECTOR (PC BOARD) 5P D6807 8-719-510-73 DIODE S3L20UF4
D6808 8-719-510-73 DIODE S3L20UF4
< DIODE > D6809 8-719-991-33 DIODE 1SS133T-77
D6810 1-247-895-91 CARBON 470K 5% 1/4W
D6600 8-719-911-19 DIODE 1SS119-25TD
D6601 £ 8-719-063-73 DIODE D1NL20U-TR D6811 8-719-110-41 DIODE MTZJ-T-77-15B
D6602 8-719-109-89 DIODE MTZJ-T-77-5.6B D6851 8-719-970-87 DIODE ERA38-06TP1
D6603 £ 8-719-921-19 DIODE 1SS119-25TD D6852 8-719-970-87 DIODE ERA38-06TP1
D6604 8-719-510-53 DIODE D4SB60L-F
< FERRITE BEAD >
D6605 8-719-991-33 DIODE 1SS133T-77
D6610 8-719-063-73 DIODE D1NL20U-TR FB6602 1-410-396-41 FERRITE 0.45UH
D6613 8-719-911-19 DIODE 1SS119-25TD FB6603 1-410-396-41 FERRITE 0.45UH
D6615 8-719-911-19 DIODE 1SS119-25TD
D6616 8-719-510-12 DIODE D10SC4M-F < IC >
D6617 8-719-500-71 DIODE D8LC40F IC6600 1-810-051-11 POWER MODULE DM-48

D6618 8-719-079-50 DIODE RBV-402L IC6604 8-729-045-40 TRANSISTOR MX0842A-F
D6619 8-719-510-12 DIODE D10SC4M-F IC6651 8-759-468-89 IC TOP209P
D6620 8-719-510-09 DIODE D10SC6M-F IC6652 8-759-394-35 IC BA12T
D6621 8-719-991-33 DIODE 1SS133T-77 IC6653 8-759-544-13 IC KA78R09-YDTU
D6622 8-719-991-33 DIODE 1SS133T-77 IC6654 8-759-574-76 IC KA78R05-SYDTU

D6623 8-719-911-19 DIODE 1SS119-25TD IC6667 8-759-908-15 IC TL431CZ
D6624 8-719-991-33 DIODE 1SS133T-77 IC6676 8-759-908-15 IC TL431CZ
112
for safety
specified.
D
IC6700 8-759-192-71 IC STV9379 Q6679 8-729-026-39 TRANSISTOR 2SA933AS-RT

IC6801 8-759-103-93 IC LM393P Q6680 8-729-029-66 TRANSISTOR DTC114ESA-TP
Q6681 8-729-029-66 TRANSISTOR DTC114ESA-TP
< COIL > Q6700 8-729-039-68 TRANSISTOR IRF620
Q6801 8-729-119-80 TRANSISTOR 2SC2688-LK
L6602 1-412-529-11 INDUCTOR 22UH
L6603 1-412-529-11 INDUCTOR 22UH Q6802 8-729-119-80 TRANSISTOR 2SC2688-LK
L6604 1-412-525-31 INDUCTOR 10UH Q6803 8-729-046-18 TRANSISTOR 2SC5480-01
L6605 1-412-523-41 INDUCTOR 6.8UH Q6804 8-729-046-18 TRANSISTOR 2SC5480-01
L6606 1-412-525-31 INDUCTOR 10UH Q6805 8-729-038-83 TRANSISTOR 2SK2251-01-F19
Q6806 8-729-047-59 TRANSISTOR STP5NB40FP
L6607 1-412-525-31 INDUCTOR 10UH
L6651 1-414-183-41 INDUCTOR 10UH Q6807 8-729-030-02 TRANSISTOR DTC144ESA-TP
L6700 1-412-524-11 INDUCTOR 8.2UH Q6851 8-729-043-95 TRANSISTOR 2SC3840K
L6801 1-412-519-11 INDUCTOR 3.3UH
L6802 1-412-519-11 INDUCTOR 3.3UH < RESISTOR >
L6803 1-412-533-21 INDUCTOR 47UH R6601 £ 1-202-968-11 CEMENTED 1.2 5% 10W

L6805 1-408-947-00 INDUCTOR 2.2MH R6602 1-249-433-11 CARBON 22K 5% 1/4W
L6806 1-535-143-61 LEAD, JUMPER (5.00MM) R6603 £ 1-249-430-11 CARBON 12K 5% 1/4W
L6807 1-410-397-21 FERRITE 1.1UH R6604 1-249-421-11 CARBON 2.2K 5% 1/4W
L6851 1-535-143-61 LEAD, JUMPER (5.00MM) R6605 1-249-417-11 CARBON 1K 5% 1/4W
< FILTER > R6606 £ 1-202-968-11 CEMENTED 1.2 5% 10W

R6608 £ 1-220-797-11 CEMENTED 0.47 5% 10W
LF6603 1-406-659-11 INDUCTOR 10UH R6611 £ 1-260-125-11 CARBON 150K 5% 1/2W
LF6604 1-406-659-11 INDUCTOR 10UH R6612 1-260-125-11 CARBON 150K 5% 1/2W
LF6801 1-406-985-11 INDUCTOR 2.2MH R6613 1-216-369-00 METAL OXIDE 1 5% 2W
LF6851 1-406-674-11 INDUCTOR 3.3MH
R6614 1-260-125-11 CARBON 150K 5% 1/2W
< IC LINK > R6615 1-260-125-11 CARBON 150K 5% 1/2W
R6616 1-216-369-00 METAL OXIDE 1 5% 2W
PS6601 £ 1-801-550-21 PROTECTOR, MODULE 2.5A MP250 R6619 1-249-425-11 CARBON 4.7K 5% 1/4W
PS6602 £ 1-801-550-21 PROTECTOR, MODULE 2.5A MP250 R6620 1-249-443-11 CARBON 0.47 5% 1/4W
PS6603 £ 1-801-549-21 PROTECTOR, MODULE 4.0A MP250
PS6604 £ 1-801-550-21 PROTECTOR, MODULE 2.5A MP250 R6624 1-249-425-11 CARBON 4.7K 5% 1/4W
PS6605 £ 1-801-550-21 PROTECTOR, MODULE 2.5A MP250 R6625 1-249-429-11 CARBON 10K 5% 1/4W
R6626 1-247-807-31 CARBON 100 5% 1/4W
< TRANSISTOR > R6627 1-249-429-11 CARBON 10K 5% 1/4W
R6628 1-260-129-11 CARBON 330K 5% 1/2W
Q6600 £ 8-729-046-47 TRANSISTOR KSC2500-BTA
Q6602 8-729-026-39 TRANSISTOR 2SA933AS-RT R6629 1-260-129-11 CARBON 330K 5% 1/2W
Q6603 8-729-119-78 TRANSISTOR 2SC1740S-RT R6630 1-249-417-11 CARBON 1K 5% 1/4W
Q6605 8-729-046-47 TRANSISTOR KSC2500-BTA R6631 1-249-425-11 CARBON 4.7K 5% 1/4W
Q6606 8-729-029-56 TRANSISTOR DTA144ESA-TP R6632 1-207-905-00 WIREWOUND 0.27 10% 2W
R6633 1-249-429-11 CARBON 10K 5% 1/4W
Q6607 8-729-119-78 TRANSISTOR 2SC1740S-RT
Q6608 8-729-029-66 TRANSISTOR DTC114ESA-TP R6635 1-535-143-11 LEAD, JUMPER (10.00MM)
Q6611 8-729-029-66 TRANSISTOR DTC114ESA-TP R6637 1-249-421-11 CARBON 2.2K 5% 1/4W
Q6651 8-729-026-39 TRANSISTOR 2SA933AS-RT R6638 1-247-895-91 CARBON 470K 5% 1/4W
Q6652 8-729-029-86 TRANSISTOR DTC124ESA-TP R6639 1-249-416-11 CARBON 820 5% 1/4W
R6640 1-249-417-11 CARBON 1K 5% 1/4W
Q6667 8-729-026-39 TRANSISTOR 2SA933AS-RT
Q6677 8-729-119-78 TRANSISTOR 2SC1740S-RT R6642 1-249-389-11 CARBON 4.7 5% 1/4W
113
for safety
D Replace only with the part number
specified.
R6644 1-249-429-11 CARBON 10K 5% 1/4W R6804 £ 1-249-408-11 CARBON 180 5% 1/4W
R6647 1-249-410-11 CARBON 270 5% 1/4W R6807 1-249-411-11 CARBON 330 5% 1/4W
R6648 1-249-433-11 CARBON 22K 5% 1/4W R6808 £ 1-260-340-11 CARBON 10K 5% 1/2W
R6649 1-215-926-00 METAL OXIDE 33K 5% 3W R6809 1-260-340-11 CARBON 10K 5% 1/2W
R6651 1-247-791-91 CARBON 22 5% 1/4W R6810 1-215-920-11 METAL OXIDE 3.3K 5% 3W
R6652 1-249-389-11 CARBON 4.7 5% 1/4W R6811 1-216-461-00 METAL OXIDE 5.6K 5% 2W
R6653 1-249-421-11 CARBON 2.2K 5% 1/4W R6812 1-215-895-11 METAL OXIDE 3.3K 5% 2W
R6655 1-249-429-11 CARBON 10K 5% 1/4W R6813 1-215-920-11 METAL OXIDE 3.3K 5% 3W
R6656 1-218-265-11 METAL 8.2M 5% 1W R6814 1-215-880-00 METAL OXIDE 10 5% 2W

R6657 1-215-421-00 METAL 1K 1% 1/4W R6815 1-215-880-00 METAL OXIDE 10 5% 2W
R6666 1-202-933-61 FUSIBLE 0.1 10% 1/2W R6816 1-216-361-00 METAL OXIDE 0.22 5% 2W
R6667 1-215-441-00 METAL 6.8K 1% 1/4W R6817 1-216-361-00 METAL OXIDE 0.22 5% 2W
R6668 1-249-428-11 CARBON 8.2K 5% 1/4W R6818 1-249-405-11 CARBON 100 5% 1/4W
R6669 1-249-413-11 CARBON 470 5% 1/4W R6819 1-247-807-31 CARBON 100 5% 1/4W
R6676 1-249-417-11 CARBON 1K 5% 1/4W R6820 1-535-143-51 LEAD, JUMPER (20.00MM)
R6677 1-249-417-11 CARBON 1K 5% 1/4W R6821 1-535-143-51 LEAD, JUMPER (20.00MM)
R6678 1-249-417-11 CARBON 1K 5% 1/4W R6831 1-260-124-11 CARBON 120K 5% 1/2W
R6679 1-215-479-00 METAL 270K 1% 1/4W R6832 1-216-434-11 METAL OXIDE 1.8K 5% 1W
R6681 1-215-467-00 METAL 82K 1% 1/4W R6833 1-202-972-61 FUSIBLE 1 5% 1/4W

R6682 1-215-447-00 METAL 12K 1% 1/4W R6834 1-535-143-21 LEAD, JUMPER (12.5MM)
R6683 1-215-429-00 METAL 2.2K 1% 1/4W R6835 1-260-288-11 CARBON 0.47 5% 1/2W
R6684 1-247-807-31 CARBON 100 5% 1/4W R6836 1-249-432-11 CARBON 18K 5% 1/4W
R6686 1-215-449-00 METAL 15K 1% 1/4W R6838 1-214-905-11 METAL 47K 1% 1/2W
R6688 1-249-417-11 CARBON 1K 5% 1/4W R6840 1-247-843-11 CARBON 3.3K 5% 1/4W
R6689 1-247-843-11 CARBON 3.3K 5% 1/4W R6842 1-260-123-11 CARBON 100K 5% 1/2W
R6690 1-249-429-11 CARBON 10K 5% 1/4W R6843 1-249-429-11 CARBON 10K 5% 1/4W
R6691 1-215-446-00 METAL 11K 1% 1/4W R6844 1-249-441-11 CARBON 100K 5% 1/4W
R6692 1-215-445-00 METAL 10K 1% 1/4W R6845 1-249-433-11 CARBON 22K 5% 1/4W
R6700 1-215-441-00 METAL 6.8K 1% 1/4W R6851 1-260-123-11 CARBON 100K 5% 1/2W

R6705 1-247-791-91 CARBON 22 5% 1/4W R6857 1-216-485-11 METAL OXIDE 5.6K 5% 3W
R6707 1-215-888-00 METAL OXIDE 220 5% 2W R6859 1-215-922-11 METAL OXIDE 6.8K 5% 3W
R6708 1-214-798-21 METAL 1.8 1% 1/2W R6880 1-215-436-00 METAL 4.3K 1% 1/4W
R6709 1-214-798-21 METAL 1.8 1% 1/2W R6885 1-215-493-00 METAL 1M 1% 1/4W
R6710 1-247-843-11 CARBON 3.3K 5% 1/4W R6886 1-215-477-00 METAL 220K 1% 1/4W
R6711 1-249-418-11 CARBON 1.2K 5% 1/4W R6887 1-215-461-00 METAL 47K 1% 1/4W
R6802 1-214-915-00 METAL 120K 1% 1/2W R6891 1-535-143-61 LEAD, JUMPER (5.00MM)
R6803 1-249-421-11 CARBON 2.2K 5% 1/4W R6892 1-535-143-61 LEAD, JUMPER (5.00MM)
114
for safety
specified.
D J
R6895 1-249-443-11 CARBON 0.47 5% 1/4W C8201 1-163-241-11 CERAMIC CHIP 39PF 5.00% 50V
R6896 1-249-443-11 CARBON 0.47 5% 1/4W C8202 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
R6897 1-215-485-00 METAL 470K 1% 1/4W C8203 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
R6898 1-215-493-00 METAL 1M 1% 1/4W C8204 1-164-506-11 CERAMIC CHIP 4.7UF 16V
R6899 1-215-493-00 METAL 1M 1% 1/4W C8205 1-165-319-11 CERAMIC CHIP 0.1UF 50V
< RELAY > C8208 1-164-506-11 CERAMIC CHIP 4.7UF 16V

RY6601 £ 1-755-266-11 RELAY, AC POWER C8210 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
RY6602 £ 1-755-167-11 RELAY, AC POWER C8211 1-163-243-11 CERAMIC CHIP 47PF 5.00% 50V
< TRANSFORMER >
T6600 £ 1-431-616-11 TRANSFORMER, CONVERTER C8214 1-163-087-00 CERAMIC CHIP 4PF 0.25PF 50V
T6601 £ 1-433-516-11 TRANSFORMER, CONVERTER (PIT) C8215 1-163-243-11 CERAMIC CHIP 47PF 5.00% 50V
T6651 1-431-732-21 TRANSFORMER, CONVERTER (SRT) C8216 1-126-933-11 ELECT 100UF 20.00% 16V
T6801 1-433-489-31 TRANSFORMER, FERRITE (HDT) C8217 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
T6802 1-433-489-31 TRANSFORMER, FERRITE (HDT)
C8218 1-126-964-11 ELECT 10UF 20.00% 50V
T6804 £ TRANSFORMER ASSY, FLYBACK C8219 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
T6852 1-433-487-11 TRANSFORMER, FERRITE (DFT) C8220 1-126-964-11 ELECT 10UF 20.00% 50V
C8221 1-104-664-11 ELECT 47UF 20.00% 16V
< THERMISTOR > C8222 1-104-664-11 ELECT 47UF 20.00% 16V
TH6600 £ 1-809-827-11 THERMISTOR, POSITIVE C8223 1-104-664-11 ELECT 47UF 20.00% 16V
TH6700 1-800-193-00 THERMISTOR C8224 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
C8225 1-104-664-11 ELECT 47UF 20.00% 16V
*A-1651-137-A J Board, Complete C8227 1-163-009-11 CERAMIC CHIP 0.001UF 10.00% 50V
< CAPACITOR >
C8105 1-126-933-11 ELECT 100UF 20.00% 16V C8230 1-163-009-11 CERAMIC CHIP 0.001UF 10.00% 50V
C8110 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V C8235 1-107-823-11 CERAMIC CHIP 0.47UF 10.00% 16V
C8144 1-107-823-11 CERAMIC CHIP 0.47UF 10.00% 16V C8238 1-164-505-11 CERAMIC CHIP 2.2UF 16V
C8150 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V C8240 1-107-823-11 CERAMIC CHIP 0.47UF 10.00% 16V
C8152 1-164-346-11 CERAMIC CHIP 1UF 16V C8242 1-104-664-11 ELECT 47UF 20.00% 16V
C8153 1-107-682-11 CERAMIC CHIP 1UF 10.00% 16V C8301 1-163-037-11 CERAMIC CHIP 0.022UF 10.00% 50V
C8155 1-107-682-11 CERAMIC CHIP 1UF 10.00% 16V C8303 1-126-933-11 ELECT 100UF 20.00% 16V
C8156 1-164-505-11 CERAMIC CHIP 2.2UF 16V C8304 1-115-340-11 CERAMIC CHIP 0.22UF 10.00% 25V
C8200 1-104-664-11 ELECT 47UF 20.00% 16V
115
for safety
J Replace only with the part number
specified.
C8309 1-126-961-11 ELECT 2.2UF 20.00% 50V C8828 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
C8322 1-163-227-11 CERAMIC CHIP 10PF 0.50PF 50V C8834 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V
C8327 1-107-682-11 CERAMIC CHIP 1UF 10.00% 16V C8839 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V
C8336 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V C8849 1-164-346-11 CERAMIC CHIP 1UF 16V
C8345 1-164-346-11 CERAMIC CHIP 1UF 16V C8852 1-164-346-11 CERAMIC CHIP 1UF 16V
C8346 1-126-963-11 ELECT 4.7UF 20.00% 50V C8853 1-126-967-11 ELECT 47UF 20.00% 50V
C8349 1-163-113-00 CERAMIC CHIP 68PF 5.00% 50V C8854 1-164-346-11 CERAMIC CHIP 1UF 16V
C8607 1-104-664-11 ELECT 47UF 20.00% 16V C8859 1-164-346-11 CERAMIC CHIP 1UF 16V
C8817 1-126-933-11 ELECT 100UF 20.00% 16V C8896 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V
C8822 1-126-933-11 ELECT 100UF 20.00% 16V C8897 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V
C8823 1-163-021-91 CERAMIC CHIP 0.01UF 10.00% 50V C8898 1-163-227-11 CERAMIC CHIP 10PF 0.50PF 50V
C8824 1-104-664-11 ELECT 47UF 20.00% 25V C8899 1-163-227-11 CERAMIC CHIP 10PF 0.50PF 50V
C8825 1-115-340-11 CERAMIC CHIP 0.22UF 10.00% 25V C8900 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V
C8826 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V C8901 1-163-017-00 CERAMIC CHIP 0.0047UF 10.00% 50V
116
for safety
specified.
J
C8903 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V D8813 8-719-158-49 DIODE UDZ-TE-17-12B
C8904 1-163-017-00 CERAMIC CHIP 0.0047UF 10.00% 50V D8814 8-719-158-49 DIODE UDZ-TE-17-12B
C8905 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V D8900 8-719-056-85 DIODE UDZ-TE-17-8.2B
C8906 1-163-251-11 CERAMIC CHIP 100PF 5.00% 50V D8901 8-719-158-49 DIODE UDZ-TE-17-12B
C8914 1-126-933-11 ELECT 100UF 20.00% 16V D8907 8-719-158-49 DIODE UDZ-TE-17-12B
D8910 8-719-056-85 DIODE UDZ-TE-17-8.2B
< FILTER > D8911 8-719-056-85 DIODE UDZ-TE-17-8.2B
D8912 8-719-158-49 DIODE UDZ-TE-17-12B
CF8150 1-760-106-11 FILTER, CERAMIC
CF8151 1-567-100-00 FILTER, CERAMIC D8913 8-719-158-49 DIODE UDZ-TE-17-12B
CF8152 1-760-450-21 FILTER, CERAMIC D8914 8-719-158-49 DIODE UDZ-TE-17-12B
CF8200 1-409-327-00 TRAP, CERAMIC (6.5MHZ) D8915 8-719-158-49 DIODE UDZ-TE-17-12B
< CONNECTOR > < FILTER >
CN8101 1-695-302-11 CONNECTOR, BOARD TO BOARD 50P FL8200 1-236-071-11 ENCAPSULATED COMPONENT
CN8900 1-561-534-41 SOCKET, PIN 21P FL8201 1-233-764-21 FILTER
CN8901 1-695-293-11 SOCKET 21P FL8203 1-236-071-11 ENCAPSULATED COMPONENT
CN8902 1-695-293-11 SOCKET 21P FL8302 1-236-071-11 ENCAPSULATED COMPONENT
FL8304 1-236-071-11 ENCAPSULATED COMPONENT
< DIODE >
FL8308 1-236-071-11 ENCAPSULATED COMPONENT
D8150 8-719-421-57 DIODE MA73-TX FL8801 1-236-071-11 ENCAPSULATED COMPONENT
D8151 8-719-421-57 DIODE MA73-TX FL8802 1-236-071-11 ENCAPSULATED COMPONENT
D8152 8-719-421-57 DIODE MA73-TX
D8153 8-719-056-83 DIODE UDZ-TE-17-6.8B < IC >
D8200 8-719-158-49 DIODE UDZ-TE-17-12B
IC8101 8-759-576-76 IC TDA2822D013TR
D8201 8-719-158-49 DIODE UDZ-TE-17-12B IC8150 8-759-478-90 IC U2861B-MFP-G3
D8202 8-719-158-49 DIODE UDZ-TE-17-12B IC8151 8-752-072-94 IC CXA1875AM-T4
D8203 8-719-158-49 DIODE UDZ-TE-17-12B IC8200 8-759-654-42 IC MSP3410D-C5QA-B4
D8801 8-719-158-49 DIODE UDZ-TE-17-12B IC8201 8-759-701-36 IC MC3403NS-E20
D8802 8-719-158-49 DIODE UDZ-TE-17-12B
IC8202 8-759-908-15 IC TL431CZ
D8803 8-719-158-49 DIODE UDZ-TE-17-12B IC8301 8-752-096-06 IC CXA2163Q-T6
D8804 8-719-158-49 DIODE UDZ-TE-17-12B IC8302 8-759-485-79 IC TC7SET08FU(TE85R)
D8805 8-719-158-49 DIODE UDZ-TE-17-12B IC8601 8-759-182-88 IC PQ09TZ5U
D8806 8-719-158-49 DIODE UDZ-TE-17-12B IC8602 8-759-576-72 IC LF50CDT-TR
D8807 8-719-158-49 DIODE UDZ-TE-17-12B
IC8603 8-759-576-72 IC LF50CDT-TR
D8808 8-719-158-49 DIODE UDZ-TE-17-12B IC8604 8-759-576-72 IC LF50CDT-TR
D8809 8-719-158-49 DIODE UDZ-TE-17-12B IC8801 8-752-096-83 IC CXA2149AQ-TL
D8810 8-719-158-49 DIODE UDZ-TE-17-12B
D8811 8-719-158-49 DIODE UDZ-TE-17-12B < SOCKET >
D8812 8-719-158-49 DIODE UDZ-TE-17-12B
J8901 1-774-747-11 JACK BLOCK, PIN
117
for safety
specified.
< COIL > R8111 1-216-033-00 RES-CHIP 220 5% 1/10W

R8112 1-216-033-00 RES-CHIP 220 5% 1/10W
L8150 1-414-757-11 INDUCTOR 100UH R8115 1-216-029-00 RES-CHIP 150 5% 1/10W
L8301 1-412-006-31 INDUCTOR CHIP 10UH
R8118 1-216-029-00 RES-CHIP 150 5% 1/10W
< TRANSISTOR > R8150 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
R8151 1-216-069-00 RES-CHIP 6.8K 5% 1/10W
Q8100 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R R8152 1-216-035-00 RES-CHIP 270 5% 1/10W
Q8151 1-801-806-11 TRANSISTOR DTC144EKA-T146 R8154 1-216-067-00 RES-CHIP 5.6K 5% 1/10W
Q8152 1-801-806-11 TRANSISTOR DTC144EKA-T146 R8155 1-216-043-91 RES-CHIP 560 5% 1/10W
R8156 1-216-081-00 RES-CHIP 22K 5% 1/10W
Q8153 1-801-806-11 TRANSISTOR DTC144EKA-T146 R8157 1-216-067-00 RES-CHIP 5.6K 5% 1/10W
Q8154 1-801-806-11 TRANSISTOR DTC144EKA-T146 R8158 1-216-043-91 RES-CHIP 560 5% 1/10W
R8161 1-216-043-91 RES-CHIP 560 5% 1/10W
Q8202 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R R8163 1-216-295-91 SHORT 0
R8167 1-216-025-91 RES-CHIP 100 5% 1/10W
Q8308 8-729-038-96 TRANSISTOR IMZ1A-T109 R8168 1-216-025-91 RES-CHIP 100 5% 1/10W
Q8309 8-729-038-96 TRANSISTOR IMZ1A-T109 R8174 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
Q8310 8-729-038-96 TRANSISTOR IMZ1A-T109
Q8809 8-729-216-22 TRANSISTOR 2SA1037K-T-146-R R8175 1-216-065-91 RES-CHIP 4.7K 5% 1/10W
R8178 1-216-073-00 RES-CHIP 10K 5% 1/10W
Q8816 8-729-216-22 TRANSISTOR 2SA1037K-T-146-R R8200 1-216-049-91 RES-CHIP 1K 5% 1/10W
Q8819 8-729-120-28 TRANSISTOR 2SC2412K-T-146-R R8202 1-216-021-00 RES-CHIP 68 5% 1/10W
R8204 1-216-049-91 RES-CHIP 1K 5% 1/10W
Q8902 8-729-216-22 TRANSISTOR 2SA1037K-T-146-R R8206 1-216-049-91 RES-CHIP 1K 5% 1/10W
< RESISTOR > R8208 1-216-037-00 RES-CHIP 330 5% 1/10W

R8209 1-216-659-11 METAL CHIP 2.2K 0.5% 1/10W
JR8101 1-216-295-91 SHORT 0 R8210 1-216-025-91 RES-CHIP 100 5% 1/10W
JR8402 1-216-295-91 SHORT 0 R8211 1-216-295-91 SHORT 0
R8212 1-216-295-91 SHORT 0
R8103 1-216-075-00 RES-CHIP 12K 5% 1/10W
R8219 1-216-025-91 RES-CHIP 100 5% 1/10W
R8108 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
R8109 1-249-389-11 CARBON 4.7 5% 1/4W R8220 1-216-025-91 RES-CHIP 100 5% 1/10W
R8110 1-249-389-11 CARBON 4.7 5% 1/4W R8221 1-216-025-91 RES-CHIP 100 5% 1/10W
118
for safety
specified.
J

R8240 1-216-651-11 METAL CHIP 1K 0.5% 1/10W R8848 1-216-035-00 RES-CHIP 270 5% 1/10W

R8314 1-216-295-91 SHORT 0 R8861 1-216-295-91 SHORT 0
R8315 1-216-121-91 RES-CHIP 1M 5% 1/10W R8863 1-216-295-91 SHORT 0


R8337 1-216-041-00 RES-CHIP 470 5% 1/10W R8883 1-216-645-11 METAL CHIP 560 0.5% 1/10W
119
for safety
specified.


R8931 1-216-039-00 RES-CHIP 390 5% 1/10W < CRYSTAL >

R8932 1-216-049-91 RES-CHIP 1K 5% 1/10W
R8933 1-216-089-91 RES-CHIP 47K 5% 1/10W X8200 1-781-148-21 VIBRATOR, CRYSTAL
R8934 1-216-089-91 RES-CHIP 47K 5% 1/10W X8301 1-781-612-11 VIBRATOR, CRYSTAL
R8935 1-216-113-00 RES-CHIP 470K 5% 1/10W
R8936 1-216-113-00 RES-CHIP 470K 5% 1/10W

R8937 1-216-035-00 RES-CHIP 270 5% 1/10W
R8938 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
R8939 1-216-035-00 RES-CHIP 270 5% 1/10W
R8940 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
R8941 1-216-025-91 RES-CHIP 100 5% 1/10W

R8942 1-216-009-91 RES-CHIP 22 5% 1/10W
120
for safety
specified.
VM
*A-1644-108-A VM Board, Complete < TRANSISTOR >
4-382-854-11 SCREW (M3X10), P, SW (+) Q5400 8-729-119-78 TRANSISTOR 2SC1740S-RT

< CAPACITOR > Q5402 8-729-119-78 TRANSISTOR 2SC1740S-RT
C5400 1-107-883-11 ELECT 330UF 20.00% 16V Q5404 8-729-026-39 TRANSISTOR 2SA933AS-RT
C5401 1-126-935-11 ELECT 470UF 20.00% 16V
C5402 1-137-150-11 MYLAR 0.01UF 5.00% 50V Q5405 8-729-026-39 TRANSISTOR 2SA933AS-RT
C5403 1-126-935-11 ELECT 470UF 20.00% 6.3V Q5406 8-729-045-05 TRANSISTOR 2SA2005
C5405 1-126-933-11 ELECT 100UF 20.00% 16V Q5407 8-729-045-04 TRANSISTOR 2SC5511
Q5408 8-729-026-39 TRANSISTOR 2SA933AS-RT
C5406 1-126-935-11 ELECT 470UF 20.00% 6.3V Q5409 8-729-119-78 TRANSISTOR 2SC1740S-RT
C5407 1-107-364-11 MYLAR 0.01UF 10.00% 200V
C5408 1-107-364-11 MYLAR 0.01UF 10.00% 200V < RESISTOR >
C5409 1-107-649-11 ELECT 2.2UF 20.00% 250V
C5410 1-130-471-00 MYLAR 0.001UF 5.00% 50V R5401 1-247-843-11 CARBON 3.3K 5% 1/4W
R5402 1-249-413-11 CARBON 470 5% 1/4W
C5411 1-130-471-00 MYLAR 0.001UF 5.00% 50V R5403 1-249-393-11 CARBON 10 5% 1/4W
C5412 1-126-935-11 ELECT 470UF 20.00% 16V R5404 1-249-420-11 CARBON 1.8K 5% 1/4W
C5413 1-126-935-11 ELECT 470UF 20.00% 16V R5405 1-249-425-11 CARBON 4.7K 5% 1/4W
C5414 1-107-652-11 ELECT 10UF 20.00% 250V
C5415 1-107-363-91 MYLAR 0.0068UF 10.00% 200V R5406 1-249-425-11 CARBON 4.7K 5% 1/4W
R5407 1-249-399-11 CARBON 33 5% 1/4W
C5417 1-102-959-91 CERAMIC 22PF 5.00% 50V R5408 1-247-807-31 CARBON 100 5% 1/4W
C5418 1-102-947-00 CERAMIC 10PF 0.50PF 50V R5409 1-249-409-11 CARBON 220 5% 1/4W
R5410 1-249-401-11 CARBON 47 5% 1/4W
< CONNECTOR >
R5411 1-249-401-11 CARBON 47 5% 1/4W
CN5402 *1-568-878-51 PIN, CONNECTOR 3P R5412 1-249-429-11 CARBON 10K 5% 1/4W
CN5444 *1-770-723-11 CONNECTOR, BOARD TO BOARD 8P R5413 1-249-414-11 CARBON 560 5% 1/4W
CN5602 *1-568-881-51 PIN, CONNECTOR 6P R5414 1-249-432-11 CARBON 18K 5% 1/4W
R5415 1-247-739-11 CARBON 100 5% 1/2W
< DIODE >
R5416 1-249-389-11 CARBON 4.7 5% 1/4W
D5400 8-719-991-33 DIODE 1SS133T-77 R5417 1-249-432-11 CARBON 18K 5% 1/4W
D5401 8-719-510-02 DIODE D1NS4-TR R5418 1-249-414-11 CARBON 560 5% 1/4W
D5402 1-535-143-61 LEAD, JUMPER (5.00MM) R5419 1-249-421-11 CARBON 2.2K 5% 1/4W
D5403 8-719-991-33 DIODE 1SS133T-77 R5420 1-249-421-11 CARBON 2.2K 5% 1/4W
D5404 8-719-991-33 DIODE 1SS133T-77
R5421 1-249-387-11 CARBON 3.3 5% 1/4W
D5405 8-719-924-11 DIODE MTZJ-T-77-22 R5422 1-249-405-11 CARBON 100 5% 1/4W
D5406 8-719-924-11 DIODE MTZJ-T-77-22 R5423 1-215-915-11 METAL OXIDE 470 5% 3W
R5425 1-535-143-61 LEAD, JUMPER (5.00MM)
< FERRITE BEAD > R5427 1-249-401-11 CARBON 47 5% 1/4W
FB5400 1-535-143-61 LEAD, JUMPER (5.00MM) R5428 1-249-413-11 CARBON 470 5% 1/4W
FB5401 1-535-143-61 LEAD, JUMPER (5.00MM) R5429 1-249-413-11 CARBON 470 5% 1/4W
R5430 1-249-417-11 CARBON 1K 5% 1/4W
< COIL > R5432 1-249-415-11 CARBON 680 5% 1/4W
R5433 1-249-400-11 CARBON 39 5% 1/4W
L5400 1-410-784-41 INDUCTOR 0.18UH
L5401 1-408-602-31 INDUCTOR 8.2UH R5434 1-249-395-11 CARBON 15 5% 1/4W
121
for safety
specified.
MISCELLANEOUS
£ 1-416-654-11 COIL DEMAGNETIC

1-452-032-00 MAGNET, DISK; 10MM
1-452-094-00 MAGNET, ROTATABLE DISK; 15MM
£ 1-453-340-11 TRANSFORMER ASSY, FLYBACK (NX4522//U214)
1-542-436-11 SPEAKER (24X4CM)
1-529-417-11 SPEAKER (8CM)

1-452-896-11 COIL, NA ROTATION (RT200)
£ 1-571-433-31 SWITCH, PUSH (AC POWER)
£ 1-690-270-21 CORD, POWER (WITH CONNECTOR)
£ 8-453-011-11 NECK ASSY, (NA-299-M)
1-693-339-11 TUNER/VIF(FR) (KV-29FQ65B)

£ 8-735-053-05 PICTURE TUBE (M68LNH060X)
£ 8-451-504-31 DEFLECTION YOKE (Y29RSC-S)
£ 1-251-807-22 CAP ASSY, HIGH VOLTAGE
1-790-082-11 CABLE, RF
*1-555-716-51 CABLE, PIN
1-542-437-11 SPEAKER (2CM)
ACCESSORIES AND PACKAGING MATERIALS
4-205-733-21 MANUAL, INSTRUCTION (KV-29FQ65B)

(GERMAN/FRENCH/ITALIAN/DUTCH)
4-205-733-11 MANUAL, INSTRUCTION (KV-29FQ65E)
(DANISH/GERMAN/SPANISH/GREEK/ITALIAN/
NORWEGIAN/PORTUGUESE/SWEDISH/FINNISH/TURKISH)
4-205-733-31 MANUAL, INSTRUCTION (KV-29FQ65K)

(BULGARIAN/CZECH/ENGLISH/HUNGARIAN/POLISH/
RUSSIAN)
*4-029-168-01 BAG, PROTECTION
*4-205-198-01 INDIVIDUAL CARTON
*4-205-199-01 CUSHION (UPPER) (ASSY)

*4-205-200-01 CUSHION (LOWER) (ASSY)
REMOTE COMMANDER
1-418-572-21 REMOTE COMMANDER (RM-893)
122
A new TV Repair Assistance Tool that combines ease of use and powerful PC software tools to
allow you to save valuable time during many TV repairs.
The TRACE interface connects to the PC's serial port. It provides

connection to the TV's I2C bus and can be provided with an InfraRed
transmitter (optional).
The interface is powered by a standard 9 V PP3 battery for portable
use, and can also be powered by an external 9V/25mA DC power
supply.
The TRACE software that is supplied with the interface allows you to:
• Read, restore and compare NVM contents via the I2C bus
• Acknowledge check of all I2C devices in the TV set
• Read Error Codes (emulation of the Error Reader tool)
With the optional IR Add-on kit, the following features can be added:
• Remote Commander emulation
• User programmable Functional Check through Infrared
• Fast and documented Test Mode setting of all Sony TV chassis
Additional features such as Adjustments and Troubleshooting are
available in chassis-dependent software modules. Please contact your
local Sony Service organisation for the latest information.
Note: For workshops already using the existing I2C Link parallel port interface (9-948-320-30), this software can be used as well, replacing the
TV Data Handling software (9-948-340-50), but Error Reader and IR functions can only be accessed with the TRACE interface.
Partnumbers: TRACE Starter Kit (TRACE interface + software): 9-948-320-70

TRACE Software (for users of the I2C Link interface): 9-948-340-80
TRACE IR Add-on (IR interface + Remote Commander software): 9-948-320-80
PC requirements: IBM-compatible PC with operating system Windows95, Windows98, or WindowsNT*.
* WindowsNT only supported with TRACE interface
English
Sony Corporation 00FP7161-1
Sony UK Printed in U.K.
9-974-995-01 Service Promotions Dept. © 2000.6

KV-29FQ65B and Other

Uploaded by

Copyright:

Available Formats

KV-29FQ65B and Other

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

KV-29FQ65B and Other

Uploaded by

Copyright:

Available Formats

SERVICE MANUAL AE-5 CHASSIS

KV-29FQ65B RM-893 French SCC-Q13G-A KV-29FQ65K RM-893 OIRT SCC-Q16K-A

KV-29FQ65E RM-893 ESP SCC-Q14G-A

Section Title Page Section Title Page

Specifications .................... 3 5. DIAGRAMS

4. CIRCUIT ADJUSTMENTS ATTENTION

SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND THE

Model KV-29FQ65B KV-29FQ65E KV-29FQ65K

FD Trinitron Wide Sound output Right and Left speaker

Connected Not Connected (open) * at 20Hz - 20kHz

Rear Connection Panel

S Video socket pin configuration

Diagnostic Item No of times Standby Probable cause

Flash Timing Example : e.g. error number 3

The detected errors can be displayed as follows :

1. Error Monitor Menu.

1. IGNORE ERRORS OFF ON OFF

Operating Time : 000075 h 15 min

Error Code Error Message

Operation Using the TV menu system:

Using the TV menu system Sound Control

Picture Mode Personal B More right

**Only available for NTSC colour signal (eg. US video tapes)

i Dual Sound For a bilingual broadcast:

Using the Features menu 6. Tuning your TV

Select ‘OFF’ if you do not want your channels stored in a given

Re-arranging the TV channels Naming a channel

Select Prog: Confirm:

then press B to highlight the ‘SKIP’ column. Language/Country

First nextTView/EPG-Providers in Europe

a future programme brings you to the long info menu.

Setting up your VCR

personal selection 8 channel broadcasts a VPS/PDC signal.

5. Select VCR Setup using V.

Select which of the connected Smartlink VCRs you wish to programme.

6. Select using B. Press OK.

Using the Further Programme Preset feature

b) AFT - Automatic Fine Tuning

‘RGB Set Up’ sub menu. H Centre O

of -10 to +10. Store the new range by pressing the OK button.

1. Press b or B to select the first or second column.

Remote control does not function. • Replace the batteries.

Interference on picture from external • Reduce sharpness level.

B/G/H E2..12, 21..69 C02..C12, C21..69

D/K R01..R12, R21..R69 C01..C12, C21..C69

2-1. Rear Cover Removal 2-2. Speaker Connector Disconnection

2-3. Chassis Removal and Refitting

When refitting the chassis ensure that the main

2-6. J Board Removal 2-7. B2 Board Removal

Release the two metal bracket support clips located on either

2-10. H5 Board Removal 2-11. Service Connector for H5 Board

Extender board assembly A-1647-037-A

Removal of the Anode-Cap

(1) REMOVING THE PLATES (2) REFITTING THE PLATES

3-1. Beam Landing

Preparation : (2) Landing

(1) Screen centre convergence [Static convergence]

1. Input a dot pattern signal from the pattern generator.

V.STAT Vertical Static Magnet

Deflection yoke positioning