Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 16 views

    Byte Olja A

    Uploaded by

    Laffe456
    1. Drain the automatic transmission fluid through the bottom plug and replace the plug and seal while wearing protective gloves. 2. Disconnect the outlet hose from the transmission and plug the outlet. Attach a flushing hose and fill with 4 liters of the specified transmission fluid. 3. Run the engine in park and drain 2 liters of used fluid, then refill with 2 liters of new fluid. Drain another liter and refill, then reattach the outlet hose with new seals.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Byte Olja A

    Uploaded by

    Laffe456
    16 views2 pages
    1. Drain the automatic transmission fluid through the bottom plug and replace the plug and seal while wearing protective gloves. 2. Disconnect the outlet hose from the transmission and plug the outlet. Attach a flushing hose and fill with 4 liters of the specified transmission fluid. 3. Run the engine in park and drain 2 liters of used fluid, then refill with 2 liters of new fluid. Drain another liter and refill, then reattach the outlet hose with new seals.

    Original Title

    Byte Olja a

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. Drain the automatic transmission fluid through the bottom plug and replace the plug and seal while wearing protective gloves. 2. Disconnect the outlet hose from the transmission and plug the outlet. Attach a flushing hose and fill with 4 liters of the specified transmission fluid. 3. Run the engine in park and drain 2 liters of used fluid, then refill with 2 liters of new fluid. Drain another liter and refill, then reattach the outlet hose with new seals.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    16 views2 pages

    Byte Olja A

    Uploaded by

    Laffe456
    1. Drain the automatic transmission fluid through the bottom plug and replace the plug and seal while wearing protective gloves. 2. Disconnect the outlet hose from the transmission and plug the outlet. Attach a flushing hose and fill with 4 liters of the specified transmission fluid. 3. Run the engine in park and drain 2 liters of used fluid, then refill with 2 liters of new fluid. Drain another liter and refill, then reattach the outlet hose with new seals.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    4. Transmission\Automatic Tra...

    Justering, byte - Changing the au...

    Changing the automatic transmission fluid

    1. Place the car on a lift. Engage position P and apply the handbrake.

    2. Place a receptacle under the car and drain the transmission fluid through the bottom plug. Fit the plug and a new seal. Use protective gloves.

    Warning The oil may be very hot if the car has just been driven.

    3. Undo the banjo nipple on the gearbox for the outlet hose. Plug the outlet hose. 4. Fit a hose from the flushing equipment, part no. 87 91 824, to the gearbox outlet. Lower the car. 5. Fill with 4 l of automatic transmission fluid as specified under Weight, fluid capacity and grade of fluid.

    9-5 (9600) 2 2002

    4. Transmission\Automatic Tra...

    Justering, byte - Changing the au...

    Important Oil is filled through the dipstick hole. Do not remove any plugs on top of the gearbox.

    6. Place the hose in a graduated receptacle that holds at least 2 l. Start the engine with the selector lever in the P position. Draw off 2 l of used fluid. Turn off the engine. 7. Fill the gearbox with 2 l of new fluid. 8. Start the engine in the P position and drain 1 l of used fluid. Turn off the engine. 9. Raise the car, remove the extension hose and plug the outlet hose. Fit the outlet hose. Use new seals. Tightening torque, banjo nipple on gearbox 27 Nm (20 lbf ft) 10. Lower the car to the floor. 11. Depress the foot brake and start the engine with Tech2 connected. Run the engine until the temperature is 80C according to the TCM "Read Values" menu. Check the oil level and top up as necessary. See Automatic transmission, fluid level. The difference in volume between the max and min marks is 0.5 litres.

    9-5 (9600) 2 2002

    You might also like