Tooling Guide For Aerospace Wiring Systems

Tooling Guide for Aerospace Wiring Systems
An & ISO A Re S91 900 Co gis 00 1:2 m te :20 00 pa re 0 8 ny d 4
Preface and Table of Contents

Daniels tools have been utilized in military aircraft and aerospace programs for over 60 years (DMC founded in 1949). By continuously planning and adding to our product lines, we are now fulfilling the demands of other high technology fields such as telecommunications, fiber optics, lasers, and many other areas of electronic packaging. The people behind the DMC name are pleased to present our Connector Assembly Tools and Accessories on the pages that follow. We believe the application data which accompanies each section will answer your specific questions concerning tooling; however, we encourage you to contact us by telephone or fax for the personal services of our knowledgeable staff of application experts.
Battery Powered Hydraulic Open Frame Crimp Tools ...............................................72 Pneumatic Open Frame Tools .......................................74 X-Die Pneumatic Tool/Bench Press Hand Tools ...........75 Electric Hydraulic Open Frame Crimp Tool ..................76 DMC Y-Dies For A Full Range of Capabilities ..............77 Typical Y-Die Configurations and Applications Coaxial Contact Tool Selection Guide ..........................78 R.F. Connectors Tool Selection Guide ..........................80 Mid-Current Range Adjustable Indent Crimp Tools .........................................................92 Circular Indent Crimp Tools ...........................................96 Special Application Indent Crimp Tools ........................98 MH835 & MH992 (Fine Tipped Indenter Tools) ......98 MH800 (Ultra Precision) ..........................................99 . MH820 (Stainless Steel Indentor) ............................99 SC8 & MH993 (Biased Crimp Tools) .....................100 LH8 (for Burndy YHMM Series Contacts) GS217 (MIL-C-22442/32-1 Clamping Ring Crimp Tool)
CONTENTS
Important Facts About Crimping .....................................1 Tensile Test Systems ........................................................2 MPT-250B (Motorized 250 lb) ...................................3 . PT-150H (Manual 150 lb) ...........................................4 HPT-200 (Portable, Manual 200 lb) ...........................5 M22520/1-01 (AF8) Miniature Adjustable Indent Crimp Tools ........................8 M22520/2-01 (AFM8) ................................................8 . M22520/7-01 (MH860) ..............................................9 . M22520/34-01 (39-000) .............................................9
Standard Adjustable Indent Crimp Tool ..........................6
Battery Powered Hydraulic Indent Crimp Tools ...........10 Pneumatic Indent Crimp Tools ......................................12 Auto-Lift Pneumatic Indent Crimp Tools .........................................................14 Large Gage Pneumatic Indent Crimp Tools ..................16 M22520/23-01 (WA23) Large Gage Contact Application Information ...............17 Technical Application Guide for Contacts and Connectors ..............................................22 Connector Illustration ..............................................22 Contact Color Code (BIN) .......................................22 . M39029 Contact Quick Location Chart ..................23 MIL-STD-1760 Connector Tooling ..........................24 MIL-I-81969
Dedicated Application Indent Crimp Tools .................101
GMT Series Precision Crimp Tools ..............................102 Battery Powered Hydraulic GMT Crimp Tools............104 DCT Series Crimp Tools ...............................................106 Hydrac 3.5 Ton Hydraulic Y-Die Crimp Tool ................108 Hydrac 3.5 Ton Hydraulic HD36-Die Crimp Tool ........109 Hydrac 5.5 Ton Hydraulic HD51-Die Crimp Tool ........112 Hydrac 7 & 12 Ton Hydraulic Crimp Tool for HD002, HD485, and HD442 Dies (AS5259) ............114 Air Powered Hydraulic Pump (HPU11M) .....................116 Hydrac 7 Ton Dieless Four Indent Crimper .................116 Wire Harness Spoon .....................................................117 Cable Tie Removal Tools..............................................117 Technical Application Guide for Terminals and Splices ..................................................118 Hand-Held Pneumatic Wire Stripping Tool .................164 Swagging Tool & Tool Kit .............................................166 Connector Service Maintenance/Support Kits ...........168 Limited Warranty ...........................................................172
Installing and Removal Tools .........................................56 Contact Retention Test Tools ........................................62 Contact Gages ................................................................63 Unwired Contact Removal Tools ...................................64 M81969/30 BETA Backshell Torque Tools .......................................65 EMI/RFI Band Application System ................................66 MIL Spec Circular Indent Crimp Tools ..........................69 M22520/4-01 (GS100-1) M22520/31-01 (GS200-1) M22520/5-01 (HX4) M22520/10-01 (HX3)
Open Frame Crimp Tools ...............................................70
DANIELS MANUFACTURING CORP.
526 THORPE RD. ORLANDO, FL 32824 U.S.A. PHONE 407/855-6161 FAX 407-855-6884 E-MAIL: DMC@DMCTOOLS.COM www.DMCTOOLS.COM CAGE CODE: 11851
FOR WARRANTY & LIMITATION OF LIABILITY INFORMATION SEE PAGE 172
ANY PRICES WE QUOTE VERBALLY OR ANY PRICES APPEARING IN OUR PRINTED PRICE LISTS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. IF YOU NEED FIRM PRICES FOR FUTURE DELIVERIES YOU SHOULD REQUEST A WRITTEN QUOTATION FROM OUR SALES OFFICE. WE ARE NOT LIABLE FOR CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY NATURE OR KIND, RESULTING FROM THE USE OF ANY OF OUR PRODUCTS.
NOTICE
Copyright 2010 Daniels Manufacturing Corp. ALL RIGHTS RESERVED
www.DMCTools.com
Important Facts About Crimping

Time Line for Crimp TeChnoLogy
1940s 1953 1957 1960 1963 1965 1969 1974 1996 2010 All terminations were soldered (Hard-wired) AMP introduced Crimp Barrel Terminals. Cannon Brothers experimented with Machined Contacts with Crimp Barrels Buchanan introduced the 4 Indent Crimp Tool with a Ratchet (Ref: MS3191) MS3191-1 was published as the first Crimp Tool Standard. MS3191-4 introduced by Daniels Manufacturing Corp.. MIL-T-22520 published and dated to replace all previous specifications. Changed to MIL-C-22520, and many Slash Sheets added. Changed to MIL-DTL-22520. Changed to AS22520. MS3191-4 also introduced the use of the double tipped indenter to produce an eight indent crimp pattern which has consistently achieved superior tensile pull off values. MS3191-4 introduced the concept of a turret head containing three locators which could be used without separating any of them from the basic crimp tool. In 1969 two military specifications for crimp tools were developed to replace the existing military drawings. They were MIL-T-22520C (Navy) and MIL-T-83724 (USAF) which defined a standard size crimp tool similar to the MS3191-4, but with an expanded eight step crimp depth range. These specifications also defined a miniature crimp tool to crimp conductors as small as AWG 32. Both documents were combined in 1971 into MIL-C-22520D. All previous military standards for crimp tools were then cancelled including the MS3191. This list includes specifications for indent crimp tools, terminal lug crimp tools, pneumatic tools, coaxial cable crimp tools and connector service kits. MIL-DTL-22520 established a single specification which set forth performance requirements for all crimp tools to be used on military standard electrical connectors. This eliminated the waste and confusion which accompanied the overlapping applications of many different standard crimp tools called out by a deluge of unrelated military drawings. Specifications state the requirements in terms of millivolt drop at a designated current. The mechanical strength of a crimped joint and hence its pull-out force (tensile strength), varies with the deformation applied. Therefore, by properly shaping the deformation a high pull-out force can be achieved, i.e. the crimp die of the tool determines the crimp configuration and deformation. The dies in the tool determine the completed crimp configuration which is generally an element of contact and/ or connector design. Some of the design considerations are: a) The type of contact, its size, shape, material and function, b) The type and size of wires to be accommodated, c) The type of tooling into which the configuration must be built.
Crimping: Then AnD noW

The first multi-pin connectors were terminated by soldering the conductor to non-removable contacts. However, high temperature applications and the need for simple and reliable field service led to the introduction of connectors with removable contacts. These were crimped onto the conductor rather than being soldered. The first standard crimp tool developed to crimp these new contacts was introduced in the early sixties. MS3191-1, a military drawing, defined this tool and its accessories. The MS3191-1 utilized a four indent crimp pattern together with a positive stop locator which controlled the travel of the indenters (crimp depth). The MS3191-1 design was a compromise between simplicity of operation and crimp performance since the crimp depth for any given contact was not adjustable to accommodate the differing diameters of the conductors to which it would be crimped. It was, however, suitable for the crimp connectors of that era. An improved tool design featuring independently adjustable crimp depths was soon introduced as MS3191-4. The MS3191-4 had an internal adjustment, totally independent of the locator, which permitted the selection of seven separate crimp depths, allowing optimal crimping of conductors ranging from AWG 12 to 26 regardless of the wire barrel size of the contact.
Copyright 2010 Daniels Manufacturing Corp.
Eight indEnt
Four indEnt
two indEnt
The Crimping ConCepT

Crimping is a method of firmly attaching a terminal or contact end to an electrical conductor by pressure forming or reshaping a metal barrel together with the conductor. The forming of a satisfactory crimp depends on the correct combination of conductor, crimp barrel and tool. When applied with a properly matched tool, a union is established which has both good electrical and mechanical characteristics. The tool will provide these requirements consistently and reliably with repeatability assured by quality cycle controlled tooling. There are several common configurations of crimped joint; several examples are shown below. The electrical resistance of a properly designed and controlled crimped joint should be equal to, or less than, the resistance of an equal section of wire.
www.DMCTools.CoM
hExagonal Crimp
CirCular Crimp
B Crimp
nEst & indEnt Crimp
CaptivE Crimp
insulation displaCEmEnt
ALL RIGHTS RESERVED.
PAGE 1
Tensile Test Systems
For Wire Terminations and Similar Applications

jaws or other components to make test sample installation and removal an easy task. Models are available with output display readings in Pounds, Newtons, and/or Kilograms to conform with the requirements of the users system. Units are available for either 115 or 230 volt power input. Its only natural that the company which supplies the best wire termination tools and equipment would add the very best Digital Tensile Testers to further meet the demand for fewer sources and improved support through a wider range of user needs. The MPT-250B Motorized Wire Crimp Pull Tester is ideal when a constant rate of pull is desired. It tests crimp strength on terminations up to size 8 in Mil-Spec applications, and size 1/0 AWG in commercial and automotive applications. The PT-150H Manual Wire Crimp Pull Tester is ideal for testing crimp strength up to size 10 for Mil-Spec applications, and size 4 AWG for commercial and automotive applications. The HPT-200 hand-held pull tester blends the accuracy and rugged design of the Alphatron pull testers into a self-contained, portable, rechargeable battery powered unit. It is ideal for testing crimp strength up to size 10 AWG in Mil-Spec applications, and size 10 AWG in commercial and automotive applications.
The DepenDABLe ALphATron TenSiLe TeST SySTem

Now available from DMC is a line of Electronic Tensile Test Systems which may be used in conjunction with SPC Programs or other Quality Control disciplines in both OEM and maintenance applications. The electronic digital readout displays are a fast and reliable source of test data. The rugged construction and the portable design of these test machines make any of them a superior choice for on-site or laboratory use in an infinite variety of applications. The operation of the equipment is simple yet versatile, and DMC will customize the gripping
mpt-250B-sC motoriZEd saFE-t-CaBlE tEstEr

The specifications for this model are the same as MPT-250B. The MPT-250B-SC is equipped to test .020, .032 and .040 diameter Safe-T-Cable.
GENERAL SPECIFICATIONS
MPT-250B Capacity Accuracy Resolution
motoriZEd pull tEstErs mpt-250B
PT-150H 150 lbf 68.0 kg 667 N 0.5% (1/2 of 1%) 0.1 lbf Digital Display w/Peak Hold Reading LED w/.56" high digits 115 VAC 50/60 Hz 230 VAC 50/60 Hz 50F to 100F (10 to 38C)
HPT-200 200 lbf 90.7 kg 889 N 0.5% (1/2 of 1%) 0.1 lbf Digital Display w/Peak Hold Reading LED w/.56" high digits 115 VAC 50/60 Hz 230 VAC Int. Battery 50F to 100F (10 to 38C)
250 lbf 113 kg 1112 N 0.5% (1/2 of 1%) 0.1 lbf Digital Display w/Peak Hold Reading
Display Type
Display Electrical
LED w/.56" high digits 115 VAC 50/60 Hz 230 VAC 50/60 Hz
operating
manual pull tEstErs pt-150h
50F to 100F (10 to 38C)
Temperature
DIMENSIONS
MPT-250B Height width Depth weight
hand-hEld portaBlE pull tEstEr modEl hpt-200
PT-150H 5 in. (18.9 cm) 8.5 in. (25.4 cm) 16 in. (27.9 cm) 15.2 lbs. (6.89 Kg) (less options)
HPT-200 2 in. (5.08 cm) case 9.5 in. (24.13 cm) case 6.25 in. (15.87 cm) case 2.5 lbs. (1.21 kg) case and hand unit
9.5 in. (24.13 cm) 10 in. (25.4 cm) 15 in. (43.2 cm) 26 lbs. (11.78 kg) (less options)
PAGE 2
www.DMCTools.CoM
MPT-250B
Motorized Wire Crimp Pull Tester

The MPT-250B Motorized Wire Crimp Pull Tester has a range from five pounds force to two-hundred and fifty pounds (2-113 Kg, 22-1112 N). You can expect the same precision and dependability that has established all ALPHATRON testers as the first choice for wire harness builders and component suppliers throughout the industry. The 250 pound capacity of this tester will extend the range of testing capabilities to size 8 Mil-Spec applications*, and size 1/0 AWG in commercial and automotive applications** (Reference AS7928 and UL486 Respectively). The portable design (25 pounds, 9.5x10x16) and the rugged construction (machined aluminum and steel) contribute to the versatility and reliability of the MPT-250B Pull Tester. A variety of options, including standard and custom grips for all types of wire terminations are available on this tester. The operation of the tester is simple and has automatic reset and auto-stop features incorporated into the design. The peak-hold digital display indicates the highest pull force that is measured by the accurate load cell/ digital processor until the reset switch is pressed. Consult the factory for more specific information, and application verification. NSN: 6635-01-581-9996
SpeCifiCATionS for The mpT-250B moToriZeD Wire Crimp pULL TeSTer

Capacity Range 5-250 lbs. (2-113 kg, 22-1112 N) Pull Rate: 1 to 10"/min. Push-button Selectable in 1"/min. Increments. Pull Rate Accuracy 1/8"/min. @ 15"/min. Rate of Pull 1/4"/min. @ 610"/min. Rate of Pull Auto-Stop at Wire/Crimp Break Point Auto Return to Start Position 15 Position Slotted Lower Terminal Grip. Display Units in Pounds, Kilograms, or Newtons Lb/Kg/Newtons Switching Built in MPT-250B options: Universal SelfTightening Cam-Type Lower Grip Ring Terminal Lower Grip 7.530"/min. Selectable Rates of Pull in 10 2.5"/min. Increments Adjustable Set-point for Motor Stop at Pre-Set Force.
Custom Grips Available. Consult DMC for details.
Terminal & Wire Grips
SLOTTED TERMINAL GRIP (standard)
p/n 15-3087
RING TERMINAL GRIP* (optional)
* Size 8 MIL Spec wire pull test is typically 220 pounds force. Sample may not break at 250 pounds. ** May require special grips due to wire diameter.
p/n 15-0066
*Some ring terminals are not suitable for this grip.
SELF TIGHTENING GRIP (optional)
p/n 15-3202
MINIATURE TERMINAL GRIP (optional)
p/n 15-3241
Copyright 2010 Daniels Manufacturing Corp. ALL RIGHTS RESERVED. www.DMCTools.CoM
PAGE 3
PT-150H
Wire Crimp Pull Tester

The PT-150H Manual Wire Crimp Pull Tester is ideal for testing crimp strength up to size 10 for Mil-Spec applications*, and size 4 AWG for commercial and automotive applications**. The PT-150H may be used in conjunction with SPC Programs or other Quality Control disciplines in both OEM and maintenance applications. The electronic digital readout display is a fast and reliable source of test data. The operation of the equipment is simple yet versatile, and DMC will customize the gripping jaws or other components to make test sample installation and removal an easy task.
* Size 10 MIL Spec wire pull test is typically 150 pounds force. Sample may not break at 150 pounds. ** May require special grips due to wire diameter.
sTANDARD FEATUREs Capacity: 150 lb, 667 N, 68 Kg Display units factory set for pounds, newtons or kilograms Resolution: 0.1 lb Accuracy: 0.5 % of full scale Digital Display with Peak Hold Backlit LCD Display with 0.56 High Digits Self-Tightening Wire Grip 15 Position Slotted Terminal Contact Grip Lever Arm Pull Mechanism OPTIONAL ACCESSORY GRIPS Ring Terminal Grip (P/N 15-0066) Self-Tightening Grip (P/N 15-3202) Right Angle Terminal Grip (P/N 15-3042) PHYSICAL Weight 15.2 Lbs. (Shipping Weight 21 Lbs.) Stand Dimensions: H. 5, W. 8.5, D. 16 CALIBRATION New units supplied with certificate of calibration traceable to NIST Factory calibration available OPTIONAL FEATURES 230 VAC 50/60 Hz Power (P/N 15-7004)
Terminal & Wire Grips

SLOTTED TERMINAL GRIP (standard)
Custom Grips Available. Consult DMC for details.
RING TERMINAL GRIP (optional)
SELF-TIGHTENING GRIP (optional)
p/n 15-3087
p/n 15-0066
p/n 15-3202
PAGE 4
www.DMCTools.CoM
HPT-200
Hand Held Wire Crimp Pull Tester
Daniels Manufacturing Corporation introduces a portable tensile tester capable of pull testing wire crimps up to 200 pounds (up to 10 AWG wire in most cases).
The lightweight Alphatron HPT-200 is a self-contained tester that extends your testing capability to the shop floor. You no longer have to wait for process amples to arrive in the QA Lab. s Durable construction and a convenient carry case ensure rotection. The ow p L Stress ension ng mechanism makes the t i HPT-200 ver atile and easy to use. A s built in NIHM attery provides up to 14 b hours use on a single charge and the Power Management Circuit allows use during charging.
THe lAb IS no longer THe lImIT

It is only natural that the ompany, c which is known throughout the world for uality wire termination tools and q equipment would add the very best portable tensile tester to meet your need for fewer sources and improved support through a wider range of capabilities. The HPT-200 hand held pull tester combines the accuracy and rugged design of the Alphatron pull testers into a portable battery powered unit. We follow that up with our expert factory service and alibration. c The HPT-200 portable tester is an extension of the Alphatron Wire Crimp Pull Tester line of products, which include the PT-150H and MPT-250B. These testers perform pull-force measurements on wire terminations. The rugged construction and portable design of these test machines make any of them a superior choice for on-site or laboratory use.
Portable, lightweight and ergonomic design Built-in NIMH battery, with charger Up to 14 hour use on a single charge Low stress tensioning mechanism Protective carrying case Shoulder bag (optional) Built-in calibration test Accuracy: (0.5% of full scale) Resolution: (0.1 pounds) Display in newtons, or kilograms is available
Standard Terminal Grip
UPPER GRIP
SPECIFICATIONS:
Capacity: 200 LBF, 90.7 kg, 889N Accuracy: .5% of full scale Resolution: .1 lbf Display Type: Digital display w/ peak hold reading Display: LCD w/.56 in. high igits d Electrical: 115 VAC 50/60 Hz or 12 VDC Int. Battery Operating Temperature: 50F to 100F (10 to 38C) Height: 2 in. (5.08 cm) case Width: 9.5 in. (24.13 cm) case Depth: 6.25 in. (15.87 cm) case Weight: 2.5 lbs. (1.21 kg) case and hand unit A 230 volt unit is available. P/N HPT-200-230
p/n 15-3035
Slot DImEnSIon
No. 1 2 3 4 5 6 7 8 size (in.) .031 .250 .047 .236 .063 .218 .080 .203 No. 9 10 11 12 13 14 15 size (in.) .094 .188 .110 .172 .125 .158 .141
www.DMCTools.CoM
PAGE 5
Standard Adjustable Crimp Tool

uppEr rangE Crimp tool aF8 m22520/1-01
The DMC AF8, qualified to MILDTL-22520/1*, has virtually limitless application within the specified wire range of 12 through 26 AwG. Over a thousand turret heads are available to adapt the tool frame to your specific military or proprietary contact/wire combination. The 8 impression crimp, which is standard in the AF8, assures absolute maximum tensile strength with almost every closed barrel contact. Special indent configurations and gaging are available upon request. For proper operation, the tool must be mated with one of the following optional accessories: a military standard or non-military turret head (TH-XXX Part No. Series), a military standard or non-military positioner (TP-XXX Part No. Series), or an adjustable head (Part No. UH2-5). This is done simply by orienting the head in the keyed position, and by tightening the hex socket screws provided as part of the head. The precision ratchet controls cycling of the tool in both directions of handle movement. This assures the same accurate crimp every time. Its like having a quality control inspector at every work station. Positive crimp depth is controlled by an 8 position selector knob conveniently located on the tool frame. The operator simply dials the desired step for the wire being used. This setting can be secured by use of a locking pin or safety wire. The carefully engineered design achieves the absolute maximum mechanical advantage and the tools light weight helps minimize operator fatigue. A permanent dataplate is affixed to all turret heads and positioners. This plate lists specific contact part numbers, the corresponding position color code (for 3 position turret heads), and suggested selector depth settings for the wire size being used. The adjustable head (P/N UH2-5) is ideally suited for lab work and prototype production applications. This head is attached in the same manner as explained above. The selected contact is inserted through the entry hole on the opposite side of the tool frame from the head. The height adjusting screw is then rotated until the contact is in the proper position for crimping. The screw can be secured with the locknut provided. Some testing will be necessary to determine the optimum selector setting for your contact/wire combination. The AF8 is approximately 934" x 212" x 114" and weighs 15 oz.
* Change to SAE AS22520 in process consult DMC for status.
PAGE 6
www.DMCTools.CoM
Other than keeping the unit clean and properly stored when not in service, no operator maintenance is required. DMC offers complete factory service by knowledgeable technicians within a reasonable turnaround time. Complete instructions concerning the use, care and warranty are supplied with each tool. Additional copies are available on request. Pneumatic versions of this tool are found on page 12. The battery powered versions of this tool are found on page 10.
MILITARY P/N
M22520/1-01 M22520/1-02 M22520/1-03 M22520/1-04 M22520/1-05 M22520/1-06 M22520/1-07 M22520/1-08 M22520/1-09 M22520/1-10 M22520/1-11 M22520/1-12 M22520/1-13 M22520/1-14 M22520/1-15 M22520/1-16 M22520/1-17 M22520/3-1
DMC P/N
AF8 TH1A TH4 TH163 UH2-5 TP45 TP85 TH199S TP360 TP365 TP465 TH270 TH285 TH286 TP485 TP513 TP651 G125 DMC1186
DESCRIPTION
TOOL FRAME TURRET TURRET TURRET ADJUSTABLE POSITIONER POSITIONER POSITIONER TURRET POSITIONER POSITIONER POSITIONER TURRET TURRET TURRET POSITIONER POSITIONER POSITIONER GAGE M22520/1 Tool Kit
NSN
5120-01-335-8571 5120-01-335-8834 5120-01-335-8835 5120-01-335-8836 5120-01-335-8583 5120-01-335-8584 5120-01-335-8585 5120-00-016-7654 5120-01-335-8586 5120-01-335-8587 5120-01-335-8588 5120-01-335-8838 5120-01-036-9221 5120-01-036-9222 5120-01-335-8589 5120-01-335-8590 5120-01-335-8591 5220-01-016-6002
The DMC1186 tool kit contains the AF8 tool frame, tool gage, and all mil-spec positioners and turret heads. Also included in the DMC1186 are tool instruction sheets and a tool selection chart. Periodic gaging is recommended to insure accurate calibration. This can be done easily by setting the tool selector knob to position #4, and checking indenter closure with the M22520/3-1 GO/NO-GO gage (DMC part no. G125).
STep 1
STep 2
insErt ContaCt
insErt prE-strippEd wirE
STep 3
STep 4
ClosE / opEn handlE
rEmovE tErminatEd wirE assEmBly
www.DMCTools.CoM
PAGE 7
miniature Adjustable Crimp Tools

lowEr rangE Crimp tool aFm8 m22520/2-01
Qualified to MIL-DTL-22520/2*, the DMC AFM8 is designed for most of the miniature and sub-miniature connector types that are so widely used in electronic systems. The AFM8 meets the need for a miniature tool accommodating wire sizes 20 through 32 AwG. The AFM8 gives a Mil-Standard 8 impression crimp, which assures maximum tensile strength. The cycle controlled precision ratchet assures consistently accurate crimps every time. The tool frame has a built-in 8 step selector knob for ease in dialing the correct crimp depth setting for the wire being used. Positioners adapt the tool frame to a particular application. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position. The positioner is easily removed and changed. Periodic gaging is recommended to insure accurate calibration. This is easily accomplished with the M22520/3-1 GO/NO-GO gage (DMC part no. G125) on SEL setting #8. The AFM8 is 6 3/4" in length and weighs approximately 10 oz. Other than keeping the tool clean and properly stored when not in use, no operator maintenance is required. Pneumatic versions of this tool are found on page 12.
MILITARY P/N
M22520/2-01 M22520/2-02 M22520/2-03 M22520/2-04 M22520/2-05 M22520/2-06 M22520/2-07 M22520/2-08 M22520/2-09 M22520/2-10 M22520/2-11 M22520/2-12 M22520/2-13 M22520/2-14 M22520/2-15 M22520/2-16 M22520/2-17 M22520/2-18 M22520/2-19 M22520/2-20 M22520/2-21 M22520/2-22 M22520/2-23 M22520/2-24 M22520/2-25 M22520/2-26 M22520/2-27 M22520/2-28 M22520/2-29 M22520/2-30 M22520/2-31 M22520/2-32 M22520/2-33 M22520/2-34 M22520/2-35 M22520/2-36 M22520/2-37 M22520/3-1
DMC P/N
AFM8 K1S K60S K151 K3 K41 K40 K13-1 K42 K43 K287 K286 K338 K340 K341 K339 K342 K343 K330-2 K331-2 K332-2 K212 K267-1 K75S-1 K261-1 K262-1 K269-1 K373-1 K372-1 K404 K406 K496 K74S K323 K532-1 K473 K709 G125 SK2/2 DMC274
DESCRIPTION
TOOL FRAME POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER GAGE ADJUSTABLE POSITIONER M22520/2 TOOL KIT
NSN
5120-01-335-8572 5120-01-335-8592 5120-01-335-8593 5120-01-335-8594 5120-01-335-8595 5120-01-335-8624 5120-01-335-8625 5120-01-335-8626 5120-01-335-8627 5120-01-335-8628 5120-01-335-8629 5120-01-335-8630 5120-01-335-8631 5120-01-335-8632 5120-01-335-8633 5120-01-335-8634 5120-01-335-8635 5120-01-335-8636 5120-01-335-8637 5120-01-335-8638 5120-01-335-8609 5120-01-335-8610 5120-01-335-8611 5120-01-335-8612 5120-01-335-8613 5120-01-335-8614 5120-01-335-8615 5120-01-335-8616 5120-01-335-8617 5120-01-335-8618 5120-01-335-8619 5120-01-335-8620 5120-01-335-8621 5120-01-335-8622 5120-01-335-8623 5120-01-335-8596 5120-01-361-9666 5220-01-016-6002 5120-01-171-1569 5180-01-259-0512
The DMC274 tool kit contains the AFM8 tool frame, tool gage, and all mil-spec positioners. Also included in the DMC274 are tool instruction sheets and a tool selection chart.
PAGE 8
www.DMCTools.CoM
miDDLe rAnge inDenT Crimp TooL mh860 m22520/7-01

Qualified to MIL-DTL-22520/7*, the DMC MH860 is a recent addition to the military specification. It was developed to meet the demonstrated need for supporting the majority of electrical systems with one versatile crimp tool frame. The MH860 accepts the entire middle wire range of 16 through 28 AWG, with positioners which adapt it to virtually all applications consistent with others in the MIL-DTL-22520 family. Pneumatic versions of this tool are found on page 12.
MIL 860 PART NUMBERS MILITARY P/N

M22520/7-01 M22520/7-02 M22520/7-03 M22520/7-04 M22520/7-05 M22520/7-06 M22520/7-07 M22520/7-08 M22520/7-09 M22520/7-10 M22520/7-11 M22520/7-12 M22520/7-13 M22520/3-3
DMC P/N
MH860 86-1S 86-2 86-3 86-4 86-5 86-6 86-7 86-11S 86-12S 86-19 86-20 86-21 G145 86-37 DMC123
DESCRIPTION
TOOL FRAME POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER GAGE ADJUSTABLE POSITIONER M22520/7 TOOL KIT
NSN
5120-01-335-8573 5120-01-335-8597 5120-01-335-8598 5120-01-335-8599 5120-01-335-8600 5120-01-335-8601 5120-01-335-8602 5120-01-335-8603 5120-01-335-8604 5120-01-335-8605 5120-01-335-8606 5120-01-335-8607 5120-01-335-8608 5120-00-338-0378 5180-01-355-5616
The DMC123 tool kit contains the MH860 tool frame, tool gage, and all mil-spec positioners. Also included in the DMC123 are tool instruction sheets and a tool selection chart.
MIL-DTL-28840 TOOLING PART NUMBERS MILITARY P/N

M22520/34-01 M22520/34-02 M22520/35 M81969/33-01 M81969/33-02 M81969/34-01
DMC P/N
39-000 39-102 G345 DAK55-22SA DAK55-22JA DRK56-22A DMC782
DESCRIPTION
BASIC CRIMP TOOL POSITIONER GAGE INST. TOOL (STRAIGHT) INST. TOOL (OFFSET) REMOVAL TOOL MIL-C-28840 TOOL KIT
NSN
5120-01-242-3516 5120-01-242-1041 5220-01-392-1065 5120-01-230-1506 5120-01-335-8666 5120-01-230-1507 5180-01-363-1391
thE mil-dtl-28840 tooling

MIL-DTL-28840 connectors were developed for the Navy, for use with jacketed cable for shipboard applications. They are a high density circular connector series utilizing a high shock threaded coupling system with front release crimped contacts. For these connectors DMC has added a new crimping tool to its range, the M22520/34-01.
PAGE 9
www.DMCTools.CoM
battery Powered Hydraulic Indent Crimp Tools

geT The porTABiLiTy of A hAnD TooL WiTh The STAminA of A poWer TooL!
DMC is pleased to present our battery powered hydraulic tools to crimp MIL-C-39029, MIL-C-39012, and a full range of proprietary contacts onto copper and aluminum cable 12 through 26 AwG. These tools are equivalent to DMCs AF8 (M22520/1-01) hand tool and use the same turret heads, positioners, and other accessories.
Afe8B
The AFE8B Battery Powered Hydraulic Indent Crimp Tool is a hand held, self-contained indent crimp tool. The crimp head, battery, and pump unit are contained in one ergonomic tool body and weighs about 4 pounds. It is equivalent to DMCs AF8 hand tool and uses the same turret heads, positioners, and other accessories. Tool INClUDEs: Carrying Case, Two 18v Batteries (p/n HDE-LI-B), One Battery Charger (p/n HDE-LI-120C). FEATUREs Ergonomic design allows one-handed operation Indenters automatically open when crimp is complete Head rotates 350 degrees Red LED to display units current status CRIMP CAPACITIES Max. Crimp Force: 1.5 Tons (13.3 kN) Avg. Crimp Time: 2 seconds Avg. Crimps per Charge: Approx. 150 (depending on size and type of contact wire AFE8B SPECIFICATIONS Length: 14.75 (375 mm) Width: 2.87 (72.9 mm) Depth: 4.5 (114.3 mm) Mass/Weight (w/ battery): 3.92lb (1.78kg) Sound Level: 75db (A) at 1 meter Vibration: <2.5m/s2 Hydraulic Oil: Shell Tellus T-15 AFE8B BATTERY (P/N: HDE-LI-B) Charging Voltage: 18 VDC Charging Time: 15 minutes 2 batteries included with each new tool Protective case included with each tool
Afe8B
Afm8, m3XX & mhXX BATTery poWereD TooLS

At the time this catalog was printed, DMCs Engineers were developing battery powered versions of our AFM8 (M22520/2-01), M-Series and MH-Series hand tool frames. Contact DMC, or check our Web site for the status of these tools.
PAGE 10
www.DMCTools.CoM
Afe8-r remoTe heAD BATTery poWereD hyDrAULiC Crimp TooL

The AFE8-R Remote Head Battery Powered Hydraulic Indent Crimp Tool is a hand held, self-contained indent crimp tool. The crimp head is separate from the battery and pump unit by a hydraulic umbilical cable. This reduces the held weight to 2 pounds, about the same as the hand tool. The battery and pump unit can be worn on a tool belt, stored in a carrying case, or mounted to a bench top. It is equivalent to DMCs AF8 hand tool and uses the same turret heads, positioners, and other accessories. Tool INClUDEs: Two Batteries (p/n HD-BATTERY-R), One Battery Charger (p/n HD-110CHARGER-R). Tool Belt, AC Adapter, and Bench Mount sold separately.
FEATUREs Ergonomic design allows one-handed operation Indenters automatically open when crimp is complete Connection point for tool balancing systems AFE8-R CRIMP CAPACITIES Max. Crimp Force: .75 Tons/1500lb/6.67kN Avg. Crimp Time: 2 seconds Avg. Crimps per Charge: Approx. 250 AFE8-R BATTERY (Lithium Ion) Charging Voltage: 10.8 VDC Lithium Ion Charging Time: 40 minutes
Afe8-r
The battery and pump unit can be worn on a tool belt (p/n 2063863-1)
Tool sPECIFICATIoNs CRIMP TOOL Length: 11/279mm Width: 2-1/2/63.5mm Depth: 2-1/2/63.5mm Mass/Weight: 1.82lb/.83kg Sound Level: 72db Hose Length: 4.5ft
POWER UNIT (With Battery Installed) Length: 9.8/248mm Width: 3.1/80mm Depth: 5.6/142mm Weight: 4.3 lb/2.0 kg Sound Level: 72 dBA Hydraulic Oil: 1.7 oz./ 48g Shell Tellus* T15
used with an AC Adapter (p/n HD-110AC)...
or mounted to a bench top (p/n BM-7).
www.DMCTools.CoM
PAGE 11
Pneumatic Indent Crimp Tools

The DMC Power Crimp tools WA27F, WA22P and WA22 are direct equivalents of their corresponding hand tools. They use the same turret heads or positioners, gages and other accessories. As production needs grow, all that needs to be added is the tool frame itself. The resulting power capability can in many instances compare with an automated system costing thousands of dollars more. These pneumatic tools are widely used in both military and proprietary programs. Their popularity has come about in part because of their unequaled reputation for trouble-free, dependable service and their cost saving and adaptability. Whether upper, middle , lower, or mid-current range, the power tools fulfill the same precise crimp requirements as the hand models. They use the same indenter configuration, the same gaging dimensions and selector settings. No additional operator training is necessary. Accurate calibration is maintained by a unique 8 step machined steel block that holds gaging tolerances far longer than the usual adjustment screw method. This solid gaging means high output with less downtime. The compact size and light weight of these tools allows them to be used easily as hand tools, as well as high production bench tools. The hand trigger is designed for equal ease of use by right or left handed operators. Bench mounted, the optional foot valve allows hands-free operation. The bench mount will allow the tool to be secured at virtually any angle for individual comfort, thereby minimizing operator fatigue.
uppEr rangE wa27F (EquivalEnt to aF8)
accommodates TH-xxx MIL-standard and commercial series turret heads or TP-xxx MIL-standard and commercial series positioners, length 10, diameter 2 3/4, weight 50 oz.
miDDLe rAnge WA22p (eQUiVALenT To mh860)
accommodates MIL-standard and commercial 86-xxx series positioners, length 8, diameter 2 1/4, weight 32 oz.
LoWer rAnge WA22 (eQUiVALenT To Afm8)
accommodates MIL-standard and commercial Kxxx series positioners, length 8, diameter 2 1/4, weight 32 oz.
PAGE 12
www.DMCTools.CoM
Header right
Subheadline
WA27-309-2C WA27-300BT-ep
miD-CUrrenT rAnge pneUmATiC TooLS

wA27-300BT-EP is the pneumatic equivalent to the M300BT, length 15", diameter 2 34", weight 119 oz. wA27-309-2C is the pneumatic equivalent to the M309, covering all 8 selector settings, length 12", diameter 2 34", weight 80 oz.. wA27-309 is the pneumatic equivalent to the M309, covering the lower 4
selector settings for AWG sizes 12-18, length 10", diameter 2 34", weight 50 oz. wA27-309-EP is the pneumatic equivalent to the M309, with an extra pneumatic cylinder which provides more power for crimping the upper 4 selector settings for AWG sizes 8-14, length 15", diameter 2 34", weight 119 oz. Mid-Current Range Tools are featured on pages 92 to 95.
Foot valvE - wa10a

The foot valve, when installed in-line with an air supply, makes a portable system which is adaptable to any work bench. Air supply requirements are 80-120 PSI (5.5 to 8.0 atmospheres) clean dry air. The system uses standard air fittings readily available in most shops.
wa22lC-x1 hand-hEld pnEumatiC Crimp tool

The same basic WA22 tool that is commonly bench mounted for first end terminations is now available in a lighter, more ergonomic version for hand-held operation.
The WA22LC-X1 tool features a smaller profile and lighter weight which makes it especially useful for second end terminations on vertical and horizontal wiring form boards. Most size 20 and smaller contacts can be terminated with this tool.
BEnCh mount - Bm-2a

The fully adjustable bench mount is compatible with most DMC power tools. The base measures 4 x 8 and can be used attached or unattached to the work surface.
PAGE 13
www.DMCTools.CoM
Pneumatic Auto-lift Indent Crimp Termination System

STep 1
Place an uncrimped contact with wire into the positioner insert. When the contact is loaded into the tool, the wire barrel remains above the tool in clear view.
STep 2 SAVe Time AnD AVoiD errorS

DMCs standard WA-series pneumatic crimp tools are now available with an automatic actuator that eliminates the step of pressing a trigger or stepping on a foot pedal to actuate the tool. Additionally, when the contact is poSiTioner loaded into the tool, the wire barrel moDULe remains in clear view. This allows the operator to see that the wire is inserted into the contact (wire barrel) correctly, with all strands inside the contact. Once the wire is properly inserted into the contact, a little additional pressure on the wire pushes the contact into the automatic positioner. When the contact reaches the correct crimp position, the tool automatically crimps the contact on to the wire. This line of tools available for the semi-automatic crimping of contact/wire assemblies for wire sizes 12 -32 AWG. However, Smaller wire sizes (24-32) are not very rigid and some difficulty may be experienced when pushing down on the contact/wire assembly. AP systems are not recommended for wire sizes smaller than 26 AWG. The operator can then insert the wire into the contact (wire barrel) and see that the wire is inserted correctly, with all strands inside the contact.
STep 3
Push down lightly with the wire in one continuous motion. When the contact reaches the correct crimp position, the automatic positioner will crimp the contact to the wire. NO foot pedal or manual activation required!
CompLeTe
Remove the finished assembly and insert the next contact to be crimped.
reTro-fiT eXiSTing TooLS

If you already have one or more DMC indent crimp pneumatic tools in your shop, DMC offers a retro-fit kit (P/N - APMOD ) to upgrade the standard pneumatic tools to an Auto-Lift pneumatic tool. Conversion also requires the appropriate QA series positioner modules.
PAGE 14
www.DMCTools.CoM
moDULe SySTem
A special module is mounted to an extended bench mount and either a WA22, WA22P, WA27F or SS version pneumatic crimp tool. Separate positioner modules are attached or removed without use of tools.
Reference Military Part Number Standard Pneumatic Tool Tool for AP Module System
M22520/1-01 M22520/2-01 M22520/7-01
WA27F WA22 WA22P
WA27FQA WA22QA WA22PQA
Other models are available - Contact DMC
Tools ordered with a positioner module will come fully assembled and ready for your crimping need. Just plug your shop air supply into the fitting provided on the base plate module. Adjust the selector knob as specified on the dataplate of the QA module for the size wire you are crimping.
The system operates from standard shop air 80-120 psi (5.5-8.27 BAR).
QUiCk ASSemBLy (QA) poSiTioner moDULeS

These modules are constructed with bayonet type mounting protrusions enabling a quick, tool-free interchange of positioner modules for different crimping requirements. All modules are clearly marked for contact type and wire size selector setting. Modules are available for most contacts for existing K and 86 Positioners and TH and TP series heads sizes 12 thru 26. These modules may be ordered separately. Modules are not available for the Straightener positioner series. QA series Positioner Module Part Number Guide K## = KQA## So the Quick Assembly Positioner Module version of positioner K42 is KQA42. TH## = THQAP##-# (The -# identifies the position color code with -2 for Blue, -4 for Red, -5 for Yellow, and -6 for Green.) So the Quick Assembly Positioner Module version of turret head TH163 in the Blue position is THQAP163-2. TP## = TPQA## So the Quick Assembly Positioner Module version of single position head TP1032 is TPQA1032. 86-## = 86QA-## So the Quick Assembly Positioner Module version of positioner 86-287 is 86QA-287.
www.DMCTools.CoM
PAGE 15
large gage Pneumatic Indent Crimp Tools

wa23 m22520/23 pnEumatiC indEnt Crimp tool
DMCs heavy pneumatic indent crimp tool functions with the push of a utton b for operator ease. This heavy duty crimp tool accommodates large size con acts t 8 through 0000 (AWG) and op r tes on ea standard 90125 psi (5.48.16 BAR) shop air sources. It is engineered with the operators safety in mind and features a full cy le c control system. This tool is por a le and t b needs no extra booster for large size contacts. The standard die assembly and positioner are easily interchangeable with no special tool required. Custom dies and positioners may be designed to spe if c requirements. An optional foot c i valve is available upon request.
m22520/23 TooL, Die AnD LoCATor LiST

MIL # DESCRIPTION DMC #
M22520/23-01 M22520/23-02 M22520/23-03 M22520/23-04 M22520/23-05 M22520/23-06 M22520/23-07 M22520/23-09 M22520/23-10 M22520/23-11
Crimp Tool Die Assy. 8 Die Assy. 6 Die Assy. 4 Die Assy. 1/0 Die Assy. 2/0 Die Assy. 4/0 Positioner 8 Positioner 6 Positioner 4 Positioner 4, 4N, 4G Positioner 1/0 Positioner 1/0, 1/0N Positioner 2/0, 2/0N Positioner 4/0, 4/0N
WA23 WA23-2 WA23-3 WA23-4 WA23-5 WA23-6 WA23-7 WA23-9 WA23-10 WA23-11 WA23-12 WA23-13 WA23-14 WA23-15 WA23-16
GAGE P/N
WA23fp fooT peDAL

The WA23FP foot pedal automates the operation of the WA23 Pneumatic Crimp Tool, and allows for hands free operation. Air supply requirements are 90-120 PSI clean, dry air.
M22520/23-12 M22520/23-13 M22520/23-14 M22520/23-15 M22520/23-16
P/N
CONTACT SIzE
GO
NO-GO
M22520/23-02 M22520/23-03 M22520/23-04 M22520/23-05 M22520/23-06 M22520/23-07
8 6 4 0 00 0000
.130 .171 .195 .325 .351 .425
.136 .178 .202 .332 .358 .432
G693 G694 G695 G696 G697 G698
Non-MIL Dies and Positioners Are Also Available
PAGE 16
www.DMCTools.CoM
Large Gage Contact Application Guide

ContaCt appliCation Cross referenCe
CONTACT PART #
M39029/44 M39029/45 M39029/44 M39029/45 M39029/44 M39029/45 M39029/29 M39029/30 M39029/29 M39029/30 M39029/29 M39029/30 M39029/48 M39029/48 M39029/48 M39029/49 M39029/49 M39029/48 M39029/48 M39029/48 M39029/49 M39029/49 M39029/48 M39029/48 M39029/49 M39029/48 M39029/48 M39029/49 M39029/48 M39029/48 M39029/49 J-Tech 541-220-0808 541-220-0404 542-220-0808 542-220-0404 Amphenol/Bendix 10-497100-6 10-497102-6 10-497222-6 10-497100-4 10-497102-4 10-497222-4 10-497100-3 10-497102-3 10-497100-43 10-497102-43 10-497101-6 10-497223-6 10-497101-4 10-497223-4 10-497101-3 317 318 319 320 321 322 323 324 327 328 329 330 331 332 333 P P P P P P P P P P S S S S S 6 6N 6 4 4N 4G 1/0 1/0N 4/0 4/0N 6 6G 4 4G 1/0 WA23-3 WA23-3 WA23-3 WA23-4 WA23-4 WA23-4 WA23-5 WA23-5 WA23-7 WA23-7 WA23-3 WA23-3 WA23-4 WA23-4 WA23-5 WA23-10 WA23-10 WA23-10 WA23-12 WA23-12 WA23-12 WA23-14 WA23-14 WA23-16 WA23-16 WA23-10 WA23-10 WA23-12 WA23-12 WA23-14 214 215 220 221 P P S S 8 4 8 4 WA23-2 WA23-4 WA23-2 WA23-4 WA23-9 WA23-11 WA23-9 WA23-11
BIN CODE
291 298 292 299 293 300 214 220 215 221 216 222 317 318 319 329 330 320 321 322 331 332 323 324 333 325 326 334 327 328 335
TYPE P/S
P S P S P S P S P S P S P P P S S P P P S S P P S P P S P P S
SIZE
DIE ASSEMBLY
WA23-2 WA23-2 WA23-4 WA23-4 WA23-5 WA23-5 WA23-2 WA23-2 WA23-4 WA23-4 WA23-5 WA23-5 WA23-3 WA23-3 WA23-3 WA23-3 WA23-3 WA23-4 WA23-4 WA23-4 WA23-4 WA23-4 WA23-5 WA23-5 WA23-5 WA23-6 WA23-6 WA23-6 WA23-7 WA23-7 WA23-7
LOCATOR
CONTACT PART #
10-497101-43 B559-01-3 B559-01-6 B559-01-1 B559-01-2 B559-01-10 B559-01-4 B559-01-5 B559-01-8 B559-01-9 B560-01-2 B560-01-4 B560-01-1 B560-01-6 B560-01-3 B560-01-5 ITT Cannon 030-3198-003 030-3199-004 030-3200-003 031-3116-003 031-3117-003 031-3118-003 5000-029-0008 5000-029-0004 5000-029-0000 5100-033-0008 5100-033-0004 5100-033-0000 Tri-Star 916-0808-093 916-0404-094 916-0000-095 915-0808-093 915-0404-094 915-0000-095 915-0606-595 915-0606-596 915-0606-597 915-0404-576 915-0404-577 915-0404-578 915-1001-498 915-1001-499 915-2020-579 915-2020-580 915-4040-598 915-4040-599 916-0606-595 916-0606-597 916-0404-576 916-0404-578 916-1001-498 916-2020-579 916-4040-598
BIN CODE
335 318 319 320 321 322 323 324 327 328 329 330 331 322 333 335 214 215 216 220 221 222 214 215 216 220 221 222 214 215 216 220 221 222 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335
TYPE P/S
S P P P P P P P P P S S S S S S P P P S S S P P P S S S P P P S S S P P P P P P P P P P P P S S S S S S S
SIZE
DIE ASSEMBLY
WA23-7 WA23-3 WA23-3 WA23-4 WA23-4 WA23-4 WA23-5 WA23-5 WA23-7 WA23-7 WA23-3 WA23-3 WA23-4 WA23-4 WA23-5 WA23-7 WA23-2 WA23-4 WA23-5 WA23-2 WA23-4 WA23-5 WA23-2 WA23-4 WA23-5 WA23-2 WA23-4 WA23-5 WA23-2 WA23-4 WA23-5 WA23-2 WA23-4 WA23-5 WA23-3 WA23-3 WA23-3 WA23-4 WA23-4 WA23-4 WA23-5 WA23-5 WA23-6 WA23-6 WA23-7 WA23-7 WA23-3 WA23-3 WA23-4 WA23-4 WA23-5 WA23-6 WA23-7
LOCATOR
MIL-C-5015 Front Release (3400 Series) 8 8 4 4 0 0 8 8 4 4 0 0 6 6N 6G 6 6G 4 4N 4G 4 4G 1/0 1/0N 1/0 2/0 2/0N 2/0 4/0 4/0N 4/0 WA23-9 WA23-9 WA23-11 WA23-11 WA23-13 WA23-13 WA23-9 WA23-9 WA23-11 WA23-11 WA23-13 WA23-13 WA23-10 WA23-10 WA23-10 WA23-10 WA23-10 WA23-12 WA23-12 WA23-12 WA23-12 WA23-12 WA23-14 WA23-14 WA23-14 WA23-15 WA23-15 WA23-15 WA23-16 WA23-16 WA23-16
Burndy Corporation (FCI) 4/0 6N 6 4 4N 4G 1/0 1/0N 4/0 4/0N 6 6G 4 4G 1/0 4/0 8 4 0 8 4 0 8 4 0 8 4 0 8 4 0 8 4 0 6 6N 6G 4 4N 4G 1/0 1/0N 2/0 2/0N 4/0 4/0N 6 6G 4 4G 1/0 2/0 4/0 WA23-16 WA23-10 WA23-10 WA23-12 WA23-12 WA23-12 WA23-14 WA23-14 WA23-16 WA23-16 WA23-10 WA23-10 WA23-12 WA23-12 WA23-14 WA23-16 WA23-9 WA23-11 WA23-13 WA23-9 WA23-11 WA23-13 WA23-9 WA23-11 WA23-13 WA23-9 WA23-11 WA23-13 WA23-9 WA23-11 WA23-13 WA23-9 WA23-11 WA23-13 WA23-10 WA23-10 WA23-10 WA23-12 WA23-12 WA23-12 WA23-14 WA23-14 WA23-15 WA23-15 WA23-16 WA23-16 WA23-10 WA23-10 WA23-12 WA23-12 WA23-14 WA23-15 WA23-16
MIL-C-5015 Rear Release (3450 Series)
MIL-C-22992 Class L Heavy Duty Cylindrical Connector
Matrix Science/Amphenol
www.DMCTools.CoM
PAGE 17
Pico* to DMC Part Number Guide

PICO* LOCATOR 4046A 4297-6 4112 4297-5 4066 4297-3 4297-2 4297-1 4536 PICO DIE ASSEMBLY 414DA-8N 414DA-6N 414DA-4N 414DA-4N 414DA-1/0N 414DA-0N 414DA-1/0N 414DA-0N 414DA-2/0N 414DA-4/0N-l 414DA-10N DMC LOCATOR WA23-9 M22520/23-Q9 WA23-10 M22520/23-10 WA23-11 M22520/23-11 WA23-12 M22520/23-12 WA23-13 M22520/23-13 WA23-14 M22520/23-14 WA23-15 M22520/23-15 WA23-16 M22520/23-16 WA23-102L DMC DIE ASSEMBLY WA23-2 M22520/23-02 WA23-3 M22520/23-03 WA23-4 M22520/23 -04 WA23-4 M22520/23-04 WA23-5 M22520/23-05 WA23-5 M22520/23-05 WA23-6 M22520/23 -06 WA23-7 M22520/23 -07 WA23-101DA CONTACTS M39029/29-214 M39029/30-220 M39029/44-291 M39029/45-298 M39029/48-317 M39029/48-318 M39029/48-319 M39029/49-329 M39029/49-330 M39029/29-215 M39029/30-221 M39029/44-292 M39029/45-299 M39029/48-320 M39029/48-321 M39029/48-322 M39029/49-331 M39029/49-332 M39029/29-216 M39029/30-222 M39029/44-293 M39029/45-300 M39029/48-323 M39029/48-324 M39029/49-333 M39029/48-325 M39029/48-326 M39029/49-334 M39029/48-327 M39029/48-328 M39029/49-335 EUROPEAN NORM # EN3155003 F 1010 EN3155008 F 1010 BENDIX - AMPHENOL # 10-113474-4P 10-1l3474-4S 10-229193-4S 10-229192-4P BENDIX - AMPHENOL # 10-113474-1P 10-113474-1S M39029/56-353 M39029/58-365 M39029/11-147 M39029/12-151 M39029/4-113 M39029/5-118 M39029/29-213 M39029/30-219 M39029/44-289 M39029/44-290 M39029/45-297 CANNON # 031-0560-081 330-0351-008 CANNON # 031-0733-000 FRANKLIN ELECTRIC # 151378-101 151378-102 151378-103 CANNON # 030-8613-000 031-8520-000 330-0351-004 330-0351-041 (METRIC) 031-8591-000 031-8560-000 CANNON # 030-8614-000 031-8521-000 330-0351-000 330-0351-001 (METRIC) 031-8561-000 030-8592-000 MS25036-115 MS25036-116 MS25036-117 MS25036-118 MS25036-119 MS25036-120 MS25036-121 MS25036-122 AWG 8 6 4 4 1/0 1/0 2/0 4/0 10
N/A
414DA-4N
WA23-111L
WA23-4 M22520/23-04
N/A N/A N/A
414DA-l/0N 414DA-0N 414DA-12N 414DA-12N N/A 414DA-12N N/A 414DA-16N 414DA-8N
WA23-113L WA23-114L WA23-115L
WA23-5 M22520/23-G5 WA23-168DA WA23-168DA WA23-169DA WA23-168DA WA23-169DA WA23-170DA WA23-2 M22520/23.02
1/0 12 12 14 12 14 16 8
4117
WA23-116L
4001 4060 Cannon CCHP8-7
WA23-117L
414DA-8N
WA23-119L
WA23-2 M22520/23-02
N/A
414DA-8N
WA23-121L
WA23-2 M22520/23-02
4234
414DA-4N
WA23-122L
WA23-4 M22520/23-04
4233
414DA-l/0N 414DA-0N
WA23-123L
WA23-5 M22520/23-05
1/0
5008-1 5006-1
414DA-8 IT 414DA-6 IT
WA23-131L WA23-132L
WA23-140DA WA23-130DA RADIAL CRIMP
8 6
* Pico is registered tradename for the The Pico Corporation.

PAGE 18
www.DMCTools.CoM Copyright 2010 Daniels Manufacturing Corp. ALL RIGHTS RESERVED.
PICO* LOCATOR 5039-1
PICO DIE ASSEMBLY 414DA-0 IT
DMC LOCATOR WA23-133L
DMC DIE ASSEMBLY WA23-118DA RADIAL CRIMP
CONTACTS MS25036-132 MS25036-133 MS25036-134 MS25036-123 MS25036-124 MS25036-125 AMP-TYCO # 32205-123 HOLLINGSWORTH# R5101B WILCOX ELECT.# 025997-0010 CANNON # 030-8590-000 030-8612-000 031-8519-000 031-8559-000 HAKO MINUTEMAN # 4 LUGS LITTON-VEAM # 27935-T9 27915-T9 LITTON-VEAM # 27937-VT9 27917-VT9 AMP-TYCO # 213179-1 (8Ga.) 213178-1 (6Ga.) 213177-1 (4Ga.) AMP-TYCO # 213183-1 (8Ga.) 213182-1 (6Ga.) 213181-1 (4Ga.) MS25036-111 MS25036-112 MS25036-156 MS25036-157 M7928/2-46 (2-37960-1) MS20659-132 MS20659-119 MS20659-136 BENDIX - AMPHENOL # 10-40792 P, 10-40793 S 10-1l3239-8S, 10-113239-8P 10-113474-8P, 10-113474-8S BENDIX - AMPHENOL # 10-40561 BENDIX - AMPHENOL # 10-40564 10-40565 AMP-TYCO # 92-0940-11-3 (4 Ga.) 92-0940-11-6 (6 Ga.) AMP-TYCO # 92-0940-9-2 (4 Ga.) 92-0940-9-9 (6 Ga.) M39029/4-111 M39029/5-116 M39029/29-212 M39029/30-218 M39029/44-288 M39029/45-295 AMP-TYCO # 93-1813-36-3 93-1813-36-6 93-1813-36-9 AMP-TYCO # 93-1813-37-3 AMP-TYCO # 93-1813-49-9 93-1813-50-9 93-1813-52-9
AWG 1/0
5007
414DA-4 IT
WA23-139L
WA23-138DA RADIAL CRIMP
N/A
414DA-8N
WA23-145L
WA23-2 M22520/23-Q2
N/A 4329 4042
414DA-1/0N 414DA-0N 414DA-8N 414DA-1/0N 414DA-0N 414DA-8N 414DA-6N 414DA-4N 414DA-8N 414DA-6N 414DA-4N 414DA-12-10 IT
WA23-146L WA23-147L WA23-148L
WA23-5 M22520/23 -05 WA23-2 M22520/23-02 WA23-5 M22520/23-05 WA23-2 M22520/23-02 WA23-3 M22520/23-03 WA23-4 M22520/23-04 WA23-2 M22520/23-02 WA23-3 M22520/23-03 WA23-4 M22520/23-04 WA23-154DA (12Ga.) WA23-152DA (l0Ga.) FORM CRIMP WA23-157DA RADIAL CRIMP WA23-159DA RADIAL CRIMP
4 8 1/0 8 6 4 8 6 4 12/10
N/A
WA23-149L
N/A
WA23-150L
5002
WA23-153L
5007 5039-1
414DA-4 NIT 414DA-2/0 NIT
WA23-156L WA23-158L
4 2/0
4025 4026
414DA-8N
WA23-161L
WA23-2 M22520/23-02
4231
N/A
WA23-162L
WA23-112DA
12
4043
414DA-4N 414DA-6N 414DA-4N 414DA-6N 414DA-4N 414DA-16N
WA23-163L
WA23-4 M22520/23-04 WA23-3 M22520/23-03 WA23-4 M22520/23-04 WA23-3 M22520/23-03 WA23-4 M22520/23-04 WA23-170DA
4 6 4 6 4 16
N/A N/A
WA23-164L WA13-166L
4116
WA23-171L
N/A
414DA-4N
WA23-176L
WA23-4 M22520/23-04
N/A
414DA-4N 414DA-8N 414DA-10N 414DA-12N
WA23-177L
WA23-4 M22520/23-04
4 8 10 12
N/A
WA23-178L
WA23-2 M22520/23-02 WA23-101DA WA23-168DA

PAGE 19
Pico* to DMC Part Number Guide

PICO* LOCATOR PICO DIE ASSEMBLY 414DA-8N 414DA-ION 414DA-12N 414DA-8N 414DA-I0N 414DA-12N 414DA-4N DMC LOCATOR DMC DIE ASSEMBLY CONTACTS TYCO 93-1813-49-6 93-1813-50-6 93-1813-52-6 TYCO 93-1813-49-3 93-1813-50-3 93-1813-52-3 ANDERSON POWER# 1319G4 (4 AWG) 1319 (2 AWG) MS25036-126 MS25036-127 MS25036-128 TYCO 326896 HOLLINGSWORTH# R8102BF WILCOX ELECT 025997-0011 AMP-Tyco # 213552-2 (P) PYLE NATIONAL ZZM-40 12-36 ZZM-4112-36 ZZM-40 12-50 ZZM-4112-50 PYLE NATIONAL ZZM-4016-36 ZZM-4116-36 ZZM-4016-50 ZZM-4116-50 CANNON # 030-0560-081 CANNON # 031-0560-041 BENDIX - Amphenol # 10-497086-085 AMP-TYCO # 52264-1 HOLLINGSWORTH # R4004BF WILCOX ELECT. 025997-0003 TYCO # 33465 TYCO # 33469 TYCO # 320383 TYCO # 36917 HONEYWELL DRAWING # 414-0508 (S) 414-0509 (P) M39029/45-299 M39029/44-292 TYCO #322006 THOMAS & BETTS # 54136 THOMAS & BETTS # 54205 THOMAS & BETTS # 54148,54208 AWG 8 10 12 8 10 12 4 2
N/A
WA23-179L
WA23-2 M22520/23-02 WA23-101DA WA23-168DA
N/A
WA23-180L
WA23-2 M22520/23-02 WA23-101DA WA23-168DA
N/A
WA23-182L
WA23-4 M22520/23-04
5007-1
414DA-2 IT
WA23-185L
WA23-184DA RADIAL CRIMP
N/A
414DA-8N
WA23-186L
4150
414DA-12N
WA23-187L
N/A
414DA-16N
WA23-188L
Pico to DMC Part Number Guide

WA23-168DA WA23-170DA WA23-2 M22520/23-02 WA23-4 M22520/23-04 WA23-2 M22520/23-02 WA23-130DA RADIAL CRIMP WA23-197DA RADIAL CRIMP WA23-157DA RADIAL CRIMP WA23-198DA RADIAL CRIMP WA23-199DA RADIAL CRIMP WA23-2 M22520/23-02 WA23-4 M22520/23-04 WA23-3 M22520/23-02 WA23-3 M22520/23-02 WA23-198DA RADIAL CRIMP
WA23-2 M22520/23-02
12
16
N/A 4070 N/A
414DA-8N 414DA-4N 414DA-8N
WA23-189L WA23-190L WA23-195L
8 4 12 (x 2) 8
N/A
414DA-6 IT
WA23-196L
N/A N/A N/A N/A
414DA-6 NIT 414DA-4 NIT 414DA-2 NIT 414DA-1/0 NIT
WA23-201L WA23-202L WA23-203L WA23-204L
6 4 2 1/0
N/A
414DA-8N
WA23-205L
N/A N/A N/A N/A
414DA-4N 414DA-6N 414DA-6N 414DA-2 NIT
WA23-208L WA23-209L WA23-210L WA23-211L
4 6 6 2

PAGE 20
PICO* LOCATOR
PICO DIE ASSEMBLY
DMC LOCATOR
DMC DIE ASSEMBLY
CONTACTS HARTING: 0932 000 6107 0932 000 6108 0932 000 6207 0932 000 6208
AWG
N/A
414DA 10N
WA23-215L
WA23-101DA
10
N/A
414DA-8N 14DA-6N
WA23-217L
WA23-2 M22520/23-02 (12,10,8 ) WA23-3 M22520/23-03 (6 )
ANDERSON POWER# 5915 (10-12 AWG) 1307 (6-8 AWG) 1383-BK (2AWG) 947 (2AWG) AMPHENOL# NZGC-C-8PB NZGC-C-8SB AMPHENOL# NZGC-C-4PB NZGC-C-4SB DEUTSCH # 0460-202-16141 0462-201-16141 ANDERSON POWER # 1331 CENTERLIFT PUMPS #36697 CENTERLIFT PUMPS #36698 CENTERLIFT PUMPS #51200 COOPER CROUSE-HINDS # 3326376-1 COOPER CROUSE-HINDS # 132-6371-1 AMP-TYCO # 212008-1 AMP-TYCO # 211161-1 AMP Tyco UN-INSUL LUG 33463
2 6 8 10 12 8
4046A
N/A
WA23-223L-BX
WA23-218DA
4112
N/A
WA23-224L-BX
WA23-219DA
4301-16S
414DA-16N-048
WA23-225L
WA23-226DA
16 14 SOLID 8 6 4 8 8 12 WIRE BARREL 8 8
N/A N/A N/A N/A N/A N/A N/A N/A N/A
414DA-12N 414DA-8N 414DA-6N 414DA-4N 414DA-8N 414DA-8N 414DA-12N 414DA-8N 414DA-8 IT
WA23-227L WA23-231L WA23-232L WA23-233L WA23-234L WA23-236L WA23-237L WA23-237L WA23-256L
WA23-168DA WA23-2 M22520/23-02 WA23-3 M22520/23-03 WA23-4 M22520/23-04 WA23-2 M22520/23-02 WA23-2 M22520/23-02 WA23-168DA WA23-168DA M22520/23-02 WA23-140DA
NOTICE: DMCs extensive experience in the wire termination industry has provided a database of comparable tooling to other tool supliers. DMC does not take responsibility for changes or modifications made by other suppliers or users. We do, however, make every effort to confirm the cross-reference information in our database. We encourage you to report any discrepancy you may find and we invite you to send contacts/wire to DMC proir to placing your tooling order so our technical staff can verify your application.

PAGE 21
Technical Application Guide Contacts and Connectors typiCal Complex Cable ConneCtor
A. Wire Seal B. Socket Contact C. Chamfered Socket Lead-In D. Peripheral O-Ring Seal E. Pin Contact F. Contact Retention Clip G. Interfacial Seal
ContaCt Color Code and bin*

0 black 1 brown 2 red 3 orange 4 yellow 5 green 6 blue 7 Violet 8 gray 9 White
*BASIC IDEnTIFICATIOn nuMBER
Example shown: 360 (Orange, Blue, Black) Manufacturers have the option of identifying contacts by stamping the bin code on the shoulder or the wire barrel (size 16 and larger).
Wire stripping teChnique

1. Determine the proper length of insulation to be removed. Wire must be visible in inspection hole. Insulation must be 1/64" 1/32" from end of contact or inside of insulation cup. 2. Insert wire into exact center of correct slot for wire size to be stripped. Each slot is marked with wire size. 3. Close handles together as close as possible. 4. To prevent birdcaging the wire, partially open handles to allow grips to open, then remove wire before allowing handles to fully open. 5. Release handles, allowing wire holder to return to open position. 6. Remove stripped wire. 7. After stripping, strands of wire should be twisted firmly together in the same direction as the normal lay of the wire. 8. Stripped wire with nicked or cut strands is not acceptable.
IMPORTANT NOTICE The tooling listed in the technical application guides of this catalog and other DMC publications represents data which has been compiled over many years of product use and application. Some tooling suggested herein may or may not cover a users specific contract or manufacturing requirements. It is the users responsibility to carry out sufficient testing to verify suitability of the specific DMC product selected for the specific requirements of each particular application. PAGE 22
www.DMCTools.CoM
M39029 Contact Quick Location Chart m39029 ContaCt quiCk loCation Chart
CONTACT PART NuMBER PAGE NuMBER CONTACT PART NuMBER PAGE NuMBER CONTACT PART NuMBER PAGE NuMBER CONTACT PART NuMBER PAGE NuMBER 25, 34, 36, 38, 52
M39029/1 M39029/2 M39029/3 M39029/4 M39029/5 M39029/61 M39029/71 M39029/8 M39029/9 M39029/10 M39029/11 M39029/12 M39029/131 M39029/141 M39029/15 M39029/16 M39029/17 M39029/18 M39029/191 M39029/201 M39029/211 M39029/22 M39029/231 M39029/241 M39029/251 M39029/261
54 45 45
27, 48, 51, 52 27, 48, 51, 52
35, 51, 79
35, 37, 51, 79
34, 36, 37, 38 25, 35, 52 25, 34-38, 52 25, 79 25, 79 25 25 Inactive Inactive Inactive 53 53 Wirewrap Wirewrap 51 34, 51 37, 34, 79 34, 79 34, 79 34, 79 Inactive Inactive 32 32 Call DMC 40, 50
M39029/873 M39029/883 M39029/893 M39029/901 M39029/911 M39029/92 M39029/93 M39029/94 M39029/95 M39029/961 M39029/971 M39029/981 M39029/991 M39029/1001 M39029/1014 M39029/1021 M39029/1031 M39029/1041 M39029/1051 M39029/106 M39029/107 M39029/108 M39029/109 M39029/113 M39029/114
34, 36, 38 25, 35, 52 37 37 Call DMC 49 49 49, 79 49, 79 49, 79 49, 79 49, 79 49, 79 Call DMC
34, 35, 36, 38
40, 50 40, 50
26, 28, 29, 33, 47 26, 28, 29, 33, 47
41, 42, 78 27, 41, 78 27, 78 31 31 46 46 41, 78 41, 78 Unpublished 44 43 43, 44 43, 78 43, 78 44, 78 43, 44, 55 26 26 26, 79 26, 79
41 30 30 30 30 Unpublished Unpublished Unpublished Unpublished Unpublished 39 39 42 41, 42 24 24 52 52 28, 79 28, 79
34, 36, 38 32 32 Call DMC Call DMC Unassigned Unassigned 37 37
1 2
shielded or coax/twinax not crimp barrel contacts
3 4
thermocouple contacts contacts for relay socket not a connector
QPL (Qualified Product List) sources listed in the following charts may change. Verify source QPL status at the following website: http://www.dscc.dla.mil/programs/MilSpec/
PAGE 23
MIL-DTL-22992
CLASSL
CIRCuLAR HEAVy DuTy FRONT RELEASE CONTACTS
For Backshell Torquing Tools, see page 65.
CONNECTOR P/N
MS90555 MS90556 MS90557 MS90558
DESCRIPTION
WALL MOUNT RECEPTACLE STRAIGHT PLUG IN-LINE RECEPTACLE WALL MOUNT PLUG
QPL SOuRCES
AMPHENOL ITT CANNON
SIZE (AWG) MATING END CONTACTS

6 6N 6G 6 6G 4 4N 4G 4 4G 0 0N 0 2/0 2/0N 2/0 4/0 4/0N 6 6 6 6 6 4 4 4 4 4 0 0 0 2/0 2/0 2/0 4/0 4/0 4/0
WIRE BARREL PIN/SOC.

P P P S S P P P S S P P S P P S P P S
PART NuMBER (CuRRENT)

M39029/48-317 M39029/48-318 M39029/48-319 M39029/49-329 M39029/49-330 M39029/48-320 M39029/48-321 M39029/48-322 M39029/49-331 M39029/49-332 M39029/48-323 M39029/48-324 M39029/49-333 M39029/48-325 M39029/48-326 M39029/49-334 M39029/48-327 M39029/48-328 M39029/49-335
PART NuMBER (SuPERSEDED)

MS90559-11 MS90559-12 MS90559-14 MS90560-7 MS90560-8 MS90559-8 MS90559-9 MS90559-13 MS90560-5 MS90560-9 MS90559-5 MS90559-6 MS90560-3 MS90559-3 MS90559-3 MS90560-2 MS90559-1 MS90559-2 MS90560-1
WIRE RANGE
6 6 6 6 6 4 4 4 4 4 0 0 0 2/0 2/0 2/0 4/0 4/0 4/0
TYPICAL CONTACT CONFIGuRATION
4/0
TOOL SELECTION BIN*

317 318 319 329 330 320 321 322 331 332 323 324 333 325 326 334 327 328 335
CRIMP TOOL AND ACCESSORY AF8 AFM8 MH860 WA23 (POS)

WA23-10 WA23-10 WA23-10 WA23-10 WA23-10 WA23-12 WA23-12 WA23-12 WA23-12 WA23-12 WA23-14 WA23-14 WA23-15 WA23-15 WA23-15 WA23-15 WA23-16 WA23-16 WA23-16
ASSEMBLY TOOLS WA23 (DIE)

WA23-3 WA23-3 WA23-3 WA23-3 WA23-3 WA23-4 WA23-4 WA23-4 WA23-4 WA23-4 WA23-5 WA23-5 WA23-5 WA23-6 WA23-6 WA23-6 WA23-7 WA23-7 WA23-7
COLOR
Orange-Brown-Violet Orange-Brown-Gray Orange-Brown-White Orange-Red-White Orange-Orange-Black Orange-Red-Black Orange-Red-Brown Orange-Red-Red Orange-Orange-Brown Orange-Orange-Red Orange-Red-Orange Orange-Red-Yellow Orange-Orange-Orange Orange-Red-Green Orange-Red-Blue Orange-Orange-Yellow Orange-Red-Violet Orange-Red-Gray Orange-Orange-Green
INSTALLING
NONE REQ. NONE REQ. NONE REQ. NONE REQ. NONE REQ. NONE REQ. NONE REQ. NONE REQ. NONE REQ. NONE REQ. NONE REQ. NONE REQ. NONE REQ. NONE REQ. NONE REQ. NONE REQ. NONE REQ. NONE REQ. NONE REQ.
REMOVAL
DRK178-6A DRK178-6A DRK178-6A DRK178-6A DRK178-6A DRK178-5A DRK178-5A DRK178-5A DRK178-5A DRK178-5A DRK178-3A DRK178-3A DRK178-3A DRK178-2A DRK178-2A DRK178-2A DRK178-1A DRK178-1A DRK178-1A DRK178-1A
DMC does nOT provide connectors, contacts, or wiring components. Parts are shown here for reference only.
PAGE 24
MIL-DTL-24308
MINIATuRE RECTANguLAR RACk AND PANEL REAR RELEASE CONTACTS
CONNECTOR P/N M24308/2 M24308/4 M24308/6 M24308/8
DESCRIPTION POLARIZED SHELL SOCKET CONTACTS POLARIZED SHELL PIN CONTACTS POLARIZED SHELL SOCKET CONTACTS NON-MAGNETIC POLARIZED SHELL PIN CONTACTS NON-MAGNETIC
QPL SOuRCES ADI ELECTRONICS, AMPHENOL CORP. CW INDUSTRIES, CINCH CONNECTOR CRISTEK INTERCONNECTS, BRUNDY GENERAL CONNECTOR, GLASSEAL PRODUCTS, ITT CANNON, POSITRONIC INDUSTRIES, TYCO ELECTRONICS
SIZE (AWG)
CONTACTS
MATING END
WIRE BARREL
PIN/SOC.
PART NuMBER* (CuRRENT)
PART NuMBER (SuPERSEDED)
WIRE RANGE
20-24 20-24
20 20
20 20
P S
M39029/64-369 M39029/63-368
M24308/11-1 M24308/10-1
22 22 TYPICAL CONTACT CONFIGuRATION
22D 22D
P S
M39029/58-360 M39029/57-354
M24308/13-1 M24308/12-1
22-28 22-28
TOOL SELECTION BIN* 369 368 COLOR ORANGE-BLUE-WHITE ORANGE-BLUE-GRAY AF8 TP585 TP585
CRIMP TOOL AND ACCESSORY AFM8 K13-1 K13-1 MH860 86-30-1 86-30-1 WA23 (POS) WA23 (DIE)
ASSEMBLY TOOLS INSTALLING DAK145 or M81969/1-02 DAK145 or M81969/1-02 DAK95-22MB or M81969/1-04 DAK95-22MB or M81969/1-04 REMOVAL DRK145 or M81969/1-02 DRK145 or M81969/1-02 DRK95-22MB or M81969/1-04 DRK95-22MB or M81969/1-04
360 354
ORANGE-BLUE-BLACK ORANGE-GREEN-YELLOW
K42 K41
86-6 86-5
* hethreenumbersuffixonM39029seriescontactsisreferredtoasaBINcode.Seepage22forcolorstripeassociation. T ContactM39029/59-366(ShieldedSocket)#8cavity,seepage79. ContactM39029/60-367(ShieldedPin)#8cavity,seepage79. ContactM39029/87isaThermocouple. ContactM39029/89isaThermocouple.
PAGE 25
MIL-DTL-26482
SerieS1
CIRCuLAR BAyONET COuPLINg FRONT RELEASE CONTACTS
CONNECTOR P/N MS3120 MS3121 MS3122 MS3124 MS3126 MS3127 MS3128 DESCRIPTION WALL MOUNT FLANGE RECEPTACLE CABLE CONNECTING PLUG BOX MOUNT FLANGE RECEPTACLE JAM NUT REAR MOUNT RECEPTACLE STRAIGHT PLUG BOX MOUNT FLANGE RECEPTACLE WALL MOUNT FLANGE RECEPTACLE AMPHENOL, ARRAY CONNECTORS, BURNDY, TT CANNON ITT CANNON, VEAM QPL SOuRCES
SIZE (AWG) CONTACTS MATING END 12 12 WIRE BARREL 12 12 PIN/SOC. P S PART NuMBER* (CuRRENT) M39029/31-234 M39029/32-253 PART NuMBER (SuPERSEDED) MS3192-12-12A MS3193-12-12A WIRE RANGE 12-14 12-14
16 16
16 16
P S
M39029/31-228 M39029/32-247
MS3192-16-16A MS3193-16-16A
16-20 16-20
20 20
20 20
P S
M39029/31-240 M39029/32-259
MS3192-20A-20A MS3193-20A-20A
20-24 20-24
TOOL SELECTION BIN* 234 253 228 247 240 259 COLOR RED-ORANGE-YELLOW RED-GREEN-ORANGE RED-RED-GRAY RED-YELLOW-VIOLET RED-YELLOW-BLACK RED-GREEN-WHITE AF8 TH1A TH1A TH1A TH1A TH1A TH1A
CRIMP TOOL AND ACCESSORY AFM8 MH860 WA23 (POS) WA23 (DIE)
ASSEMBLY TOOLS INSTALLING DAK12B DAK12B REMOVAL DRK12B DRK12B DRK16B DRK16B DRK20B DRK20B
86-2 86-2 K1S K1S 86-1S 86-1S
DAK16B DAK16B DAK20B** DAK20B**
* hethreenumbersuffixonM39029seriescontactsisreferredtoasaBINcode.Seepage22forcolorstripeassociation.** T **For#20VG26482ContactsuseDAK490InstallingTool. ContactM39029/23-194to198(ShieldedPin)#8cavity,Inactive. ContactM39029/24-199to203(ShieldedSocket)#8cavity,Inactive. ContactM39029/25-204to206(ShieldedPin)#12cavity,seepage79. ContactM39029/26-207to209(ShieldedSocket)#12cavity,seepage79.
PAGE 26
MIL-DTL-26482
SerieS2
CIRCuLAR BAyONET COuPLINg REAR RELEASE CONTACTS
CONNECTOR P/N MS3470 MS3471 MS3472 MS3474 MS3475 MS3476 DESCRIPTION WALL MOUNT FLANGE RECEPTACLE CABLE CONNECTING PLUG WIDE FLANGE WALL MOUNT RECEPTACLE JAM NUT REAR MOUNT RECEPTACLE PLUG RFI STRAIGHT PLUG AERO ELECTRIC, AMPHENOL, DEUTSCH BURNDY, ITT CANNON, HERMETIC SEAL CORPORATION QPL SOuRCES
SIZE (AWG) CONTACTS MATING END 12 12 12 12 16 16 16 16 20 20 WIRE BARREL 12 12 16 16 16 16 20 20 20 20 PIN/SOC. P S P S P S P S P S PART NuMBER* (CuRRENT) M39029/4-113 M39029/5-118 M39029/4-114 M39029/5-119 M39029/4-111 M39029/5-116 M39029/4-112 M39029/5-117 M39029/4-110 M39029/5-115 PART NuMBER (SuPERSEDED) M39029/4-12-12 M39029/5-12-12 M39029/4-12-16 M39029/5-12-16 M39029/4-16-16 M39029/5-16-16 M39029/4-16-20 M39029/5-16-20 M39029/4-20-20 M39029/5-20-20 WIRE RANGE 12-14 12-14 16-20 16-20 16-20 16-20 20-24 20-24 20-24 20-24
TOOL SELECTION BIN* 113 118 114 119 111 116 112 117 110 115 COLOR BROWN-BROWN-ORANGE BROWN-BROWN-GRAY BROWN-BROWN-YELLOW BROWN-BROWN-WHITE BROWN-BROWN-BROWN BROWN-BROWN-BLUE BROWN-BROWN-RED BROWN-BROWN-VIOLET BROWN-BROWN-BLACK BROWN-BROWN-GREEN AF8 TH1A TH1A TH1A TH1A TH1A TH1A TH1A TH1A TH1A TH1A
ASSEMBLY TOOLS INSTALLING DAK83-12B DAK83-12B REMOVAL DRK83-12B DRK83-12B DRK83-12B DRK83-12B DRK83-16B DRK83-16B DRK83-16B DRK83-16B DRK83-20B DRK83-20B
86-2 86-2 86-2 86-2 86-2 86-2 K1S K1S 86-1S 86-1S
DAK83-12B DAK83-12B DAK83-16B DAK83-16B DAK83-16B DAK83-16B DAK83-20B DAK83-20B
* hethreenumbersuffixonM39029seriescontactsisreferredtoasaBINcode.Seepage22forcolorstripeassociation. T ContactM39029/7-126to128(ShieldedPin)#12cavity,seepage78. ContactM39029/8-129to131(ShieldedSocket)#12cavity,seepage78.
PAGE 27
MIL-DTL-26500
CIRCuLAR THREADED OR BAyONET COuPLINg FRONT RELEASE CONTACTS
CONNECTOR P/N MS24264 MS24265 MS24266 MS27613 MS27614 MS27615 DESCRIPTION FLANGE MOUNT RECEPTACLE SINGLE HOLE MOUNT RECEPTACLE STRAIGHT PLUG WALL MOUNT RECEPTACLE JAM NUT PLUG PYLE-NATIONAL, AERO ELECTRIC, RMS COMPANY, CINCH CONNECTOR DIVISION AMPHENOL, HERMETIC SEAL CORPORATION, AMERICAN MICRO PRODUCTS QPL SOuRCES
SIZE (AWG) CONTACTS MATING END 12 12 WIRE BARREL 12 12 PIN/SOC. P S PART NuMBER* (CuRRENT) M39029/31-235 M39029/32-254 PART NuMBER (SuPERSEDED) MS24254-12P MS24255-12S WIRE RANGE 12-14 12-14
16 16
16 16
P S
M39029/31-229 M39029/32-248
MS24254-16P MS24255-16S
16-20 16-20
20 20
20 20
P S
M39029/31-241 M39029/32-260
MS24254-20P MS24255-20S
20-24 20-24
TOOL SELECTION
CRIMP TOOL AND ACCESSORY WA23 (POS) WA23 (DIE)
ASSEMBLY TOOLS
BIN* 235 254 229 248 241 260
COLOR RED-ORANGE-GREEN RED-GREEN-YELLOW RED-RED-WHITE RED-YELLOW-GRAY RED-YELLOW-BROWN RED-BLUE-BLACK
AF8 TH1A TH1A TH1A TH1A TH1A TH1A
AFM8
MH860
INSTALLING DAK12B DAK12B
REMOVAL DRK12B DRK12B DRK16B DRK16B DRK20B DRK20B
86-2 86-2 K1S K1S 86-2 86-2
DAK16B DAK16B DAK20B DAK20B
* hethreenumbersuffixonM39029seriescontactsisreferredtoasaBINcode.Seepage22forcolorstripeassociation. T ContactM39029/54-342(ShieldedPin)#12cavity,seepage79. ContactM39029/54-343(ShieldedPin)#8cavity,seepage79. ContactM39029/55-344(ShieldedSocket)#12cavity,seepage79. ContactM39029/55-345(ShieldedSocket)#8cavity,seepage79.
PAGE 28
MIL-DTL-26518 HEADER
CLASSr SUbheADer
MINIATuRE RECTANguLAR RACk AND PANEL FRONT RELEASE CONTACTS
CONNECTOR P/N M24285 M24286
DESCRIPTION RECEPTACLE PLUG
QPL SOuRCES AMPHENOL
SIZE (AWG) CONTACTS MATING END 12 12 WIRE BARREL 12 12 PIN/SOC. P S PART NuMBER* (CuRRENT) M39029/31-235 M39029/32-254 PART NuMBER (SuPERSEDED) MS24254-12P MS24255-12S WIRE RANGE 12-14 12-14
16 16
16 16
P S
M39029/31-229 M39029/32-248
MS24254-16P MS24255-16S
16-20 16-20
20 20
20 20
P S
M39029/31-241 M39029/32-260
MS24254-20P MS24255-20S
20-24 20-24
TOOL SELECTION BIN* COLOR AF8
ASSEMBLY TOOLS INSTALLING REMOVAL
235 254 229 248 241 260
RED-ORANGE-GREEN RED-GREEN-YELLOW RED-RED-WHITE RED-YELLOW-GRAY RED-YELLOW-BROWN RED-BLUE-BLACK
TH1A TH1A TH1A TH1A TH1A TH1A K1S K1S 86-2 86-2 86-1S 86-1S
DAK12B DAK12B DAK16B DAK16B DAK20B DAK20B
DRK12B DRK12B DRK16B DRK16B DRK20B DRK20B
TOOL SELECTION
CRIMP TOOL AND ACCESSORY WA23 (POS) WA23 (DIE)
ASSEMBLY TOOLS
BIN* 235 254 229 248 241 260
COLOR RED-ORANGE-GREEN RED-GREEN-YELLOW RED-RED-WHITE RED-YELLOW-GRAY RED-YELLOW-BROWN RED-BLUE-BLACK
AF8 TH1A TH1A TH1A TH1A TH1A TH1A
AFM8
MH860
INSTALLING DAK12B DAK12B
REMOVAL DRK12B DRK12B DRK16B DRK16B DRK20B DRK20B
86-2 86-2 K1S K1S 86-1S 86-1S
* hethreenumbersuffixonM39029seriescontactsisreferredtoasaBINcode.Seepage22forcolorstripeassociation. T
PAGE 29
HEADER MIL-DTL-28748 SUbheADer

RECTANguLAR RACk AND PANEL
CONNECTOR P/N M28748/3 M28748/4 M28748/9 M28748/10 M28748/13 M28748/14
DESCRIPTION PIN CONTACTS SIZE 16 & 20 SKT CONTACTS SIZE 16 & 20 PIN CONTACTS 16 POLARIZED CENTER SCREW LOCK SKT CONTACTS 16 POLARIZED CENTER SCREW LOCK PIN CONTACTS 22 SKT CONTACTS 22
QPL SOuRCES
CONTINENTAL CONNECTOR CO., POSITRONIC INDUSTRIES, WINCHESTER ELECTRONICS, DELPHI CONNECTION SYSTEMS, J-TECH, INC.
SIZE (AWG) CONTACTS MATING END 16 16 16 16 16 16 16 16 TYPICAL CONTACT CONFIGuRATION 20 20 22 22 WIRE BARREL 16 16 20 20 16 16 20 20 20 20 22 22 PIN/SOC. P S P S P S P S P S P S PART NuMBER* (CuRRENT) M39029/36-278 M39029/37-280 M39029/36-277 M39029/37-279 M39029/34-273 M39029/35-276 M39029/34-272 M39029/35-275 M39029/34-271 M39029/35-274 M39029/34-440 M39029/35-441 PART NuMBER (SuPERSEDED) MS17807-16-16 MS17808-16-16 MS17807-16-20 MS17808-16-20 MS17803-16-16 MS17804-16-16 MS17803-16-20 MS17804-16-20 MS17803-20-20 MS17804-20-20 M39029/34-22-22 M39029/35-22-22 WIRE RANGE 16-20 16-20 20-24 20-24 16-20 16-20 20-24 20-24 20-24 20-24 22-26 22-26
TOOL SELECTION BIN* 278 280 277 279 273 276 272 275 271 274 440 441 COLOR RED-VIOLET-GRAY RED-GRAY-BLACK RED-VIOLET-VIOLET RED-VIOLET-WHITE RED-VIOLET-ORANGE RED-VIOLET-BLUE RED-VIOLET-RED RED-VIOLET-GREEN RED-VIOLET-BROWN RED-VIOLET-YELLOW YELLOW-YELLOW-BLACK YELLOW-YELLOW-BROWN AF8 TH4 TH4 TH4 TH4 TH4 TH4 TH4 TH4 TH4 TH4
ASSEMBLY TOOLS INSTALLING DAK123A DAK123A DAK123A DAK123A REMOVAL DRK124A DRK124A DRK124A DRK124A DRK124A DRK124A DRK124A DRK124A DRK124A DRK124A DRK124-22A DRK124-22A
86-146 86-146 86-146 86-146 86-146 86-146 K280 K280
DAK123A DAK123A DAK123A DAK123A DAK123A DAK123A DAK123-22A DAK123-22A
PAGE 30
MIL-DTL-28804
RECTANguLAR POLARIZED CENTER JACkSCREW HIgH DENSITy REAR RELEASE CONTACT
CONNECTOR P/N M28804/1 M28804/2 M28804/3 M28804/4 M28804/5 M28804/6 DESCRIPTION NON-ENVIRONMENTAL RECEPTACLE (SOCKETS) NON-ENVIRONMENTAL PLUG (PINS) ENVIRONMENTAL RECEPTACLE (SOCKETS) ENVIRONMENTAL PLUG (PINS) ENVIRONMENTAL RECEPTACLE (SOCKETS) (POTTING TYPE) ENVIRONMENTAL PLUG (PINS) (POTTING TYPE) DELPHI CONNECTION SYSTEMS QPL SOuRCES
SIZE (AWG) CONTACTS MATING END WIRE BARREL PIN/SOC. PART NuMBER* (CuRRENT) PART NuMBER (SuPERSEDED) WIRE RANGE
22
22D
M28804/9-1
22-28
22 TYPICAL CONTACT CONFIGuRATION
22D
M28804/10-1
22-28
TOOL SELECTION BIN* --COLOR NONE NONE AF8
CRIMP TOOL AND ACCESSORY AFM8 K473 K473 MH860 86-193 86-193 WA23 (POS) WA23 (DIE)
ASSEMBLY TOOLS INSTALLING M81969/1-04 M81969/1-04 REMOVAL M81969/1-04 M81969/1-04
* hethreenumbersuffixonM39029seriescontactsisreferredtoasaBINcode.Seepage________forcolorstripeassociation. T
PAGE 31
MIL-DTL-28840
CIRCuLAR THREADED COuPLINg FRONT RELEASE CONTACTS HIgH DENSITy HIgH SHOCk
CONNECTOR P/N M28840/10 M28840/11 M28840/12 M28840/14 M28840/16 M28840/17 M28840/18 M28840/19 M28840/20 M28840/21 M28840/26 M28840/28 M28840/29 DESCRIPTION WALL MOUNT RECEPTACLE CABLE CONNECTING RECEPTACLE BOX MOUNT RECEPTACLE JAM NUT MOUNT RECEPTACLE STRAIGHT PLUG PLUG OPEN WIRE ASSEMBLY PLUG OPEN WIRE ASSEMBLY 90 ELBOW PLUG OPEN WIRE ASSEMBLY 45 ELBOW WALL MOUNT ASSEMBLY STRAIGHT CABLE CONVERTING ASSEMBLY STRAIGHT PLUG ASSEMBLY STRAIGHT PLUG ASSEMBLY 90 ELBOW PLUG ASSEMBLY 45 ELBOW GLENAIR, ITT CANNON, DELPHI CONNECTION SYSTEMS QPL SOuRCES
SIZE (AWG) CONTACTS MATING END 20 20 WIRE BARREL 20 20 PIN/SOC. P S PART NuMBER* (CuRRENT) M39029/83-508 M39029/84-509 PART NuMBER (SuPERSEDED) M39029/83-20-20 M39029/84-20-20 WIRE RANGE 20-24 20-24
20 20
22 22
P S
M39029/83-450 M39029/84-452
M39029/83-20-22 M39029/84-20-22
22-26 22-26
20 20
28 28
P S
M39029/83-451 M39029/84-453
M39029/83-20-28 M39029/84-20-28
28-32 28-32
TOOL SELECTION BIN*

508 509 450 452 451 453
CRIMP TOOL AND ACCESSORY** AF8 AFM8

K534 K534 K534 K534 K534 K534
ASSEMBLY TOOLS** INSTALLING

DAK55-22SA (STRAIGHT) or DAK55-22JA (OFFSET) DAK55-22SA (STRAIGHT) or DAK55-22JA (OFFSET) DAK55-22SA (STRAIGHT) or DAK55-22JA (OFFSET)
COLOR
GREEN-BLACK-GRAY GREEN-BLACK-WHITE YELLOW-GREEN-BLACK YELLOW-GREEN-RED YELLOW-GREEN-BROWN YELLOW-GREEN-ORANGE
MH860
39-000
39-102 39-102 39-102 39-102 39-102 39-102
REMOVAL
DRK56-22A DRK56-22A DRK56-22A DRK56-22A DRK56-22A DRK56-22A
* hethreenumbersuffixonM39029seriescontactsisreferredtoasaBINcode.Seepage22forcolorstripeassociation. T **Seepage9formoreinformationonMIL-DTL-28840Tooling. ContactM39029/104(ConcentricTwinaxpin)size8 ContactM39029/105(ConcentricTwinaxpin)size8
PAGE 32
HEADER MIL-C-38300 SUbheaDeR

CirCular Threaded or BayoneT Coupling FronT release ConTaCTs
connector P/n MS24264 MS24265 MS24266 descriPtion FLANGE MOUNT RECEPTACLE SINGLE HOLE MOUNT RECEPTACLE STRAIGHT PLUG NO QPL SOURCES QPL sources
size (AWG) contActs mAtinG end Wire BArreL Pin/soc. PArt numBer* (current) PArt numBer (suPerseded) Wire rAnGe
16 16
16 16
P S
M39029/31-229 M39029/32-248
MS24254-16P MS24255-16S
16-20 16-20
tyPicAL contAct conFiGurAtion
20 20
20 20
P S
M39029/31-241 M39029/32-260
MS24254-20P MS24255-20S
20-24 20-24
tooL seLection
crimP tooL And Accessory WA23 (Pos) WA23 (die)
AssemBLy tooLs
Bin* 229 248 241 260
coLor RED-RED-WHITE RED-YELLOW-GRAY RED-YELLOW-BROWN RED-BLUE-BLACK
AF8 TH1A TH1A TH1A TH1A
AFm8
mH860 86-2 86-2
instALLinG DAK16B DAK16B DAK20B DAK20B
remoVAL DHK16B DHK16B DHK20B DHK20B
K1S K1S
86-1S 86-1S
DMC does NOT provide connectors, contacts, or wiring components. Parts are shown here for reference only.
PAGE 33
MIL-PRF-38999 HEADER
SeRieS 1 SUbheaDeR
sCoop prooF CirCular BayoneT Coupling rear release ConTaCTs
connector P/n MS27466 MS27467 MS27468 MS27496 MS27505 MS27656 descriPtion WALL MOUNT FLANGE RECEPTACLE STRAIGHT PLUG JAM NUT MOUNT RECEPTACLE RECEPTACLE BOX MOUNT FLANGE RECEPTACLE BACK PANEL WALL MOUNT RECEPTACLE size (AWG) contActs mAtinG end 12 12 16 16 20 20 22 22 tyPicAL contAct conFiGurAtion 22 22 22 22 10 10 tooL seLection Bin* 365 353 364 352 363 351 362 350 361 349 360 348 528 527 coLor ORANGE-BLUE-GREEN ORANGE-GREEN-ORANGE ORANGE-BLUE-YELLOW ORANGE-GREEN-RED ORANGE-BLUE-ORANGE ORANGE-GREEN-BROWN ORANGE-BLUE-RED ORANGE-GREEN-BLACK ORANGE-BLUE-BROWN ORANGE-YELLOW-WHITE ORANGE-BLUE-BLACK ORANGE-YELLOW-GRAY GREEN-RED-GRAY GREEN-RED-VIOLET AF8 TH163 TH163 TH163 TH163 TH163 TH163 K43 K43 K42 K40 K42 K40 K42 K40
1716P-1 (Complete Tool) 1716P-1 (Complete Tool)
QPL sources
AERO ELECTRIC, PYLE-NATIONAL, SOCAPEX, SOURIAU, DEUTSCH, BURNDY, ITT CANNON, VEAM, AMERICAN MICRO PRODUCTS, GLENAIR, HERMETIC SEAL CORPORATION, HI REL CONNECTORS, SEALTRON
Wire BArreL 12 12 16 16 20 20 22 22 22M 22M 22D 22D 10 10
Pin/soc. P S P S P S P S P S P S P S
PArt numBer* (current) M39029/58-365 M39029/56-353 M39029/58-364 M39029/56-352 M39029/58-363 M39029/56-351 M39029/58-362 M39029/56-350 M39029/58-361 M39029/56-349 M39029/58-360 M39029/56-348 M39029/58-528 M39029/56-527
PArt numBer (suPerseded) MS27493-12 MS27490-12 MS27493-16 MS27490-16 MS27493-20 MS27490-20 MS27493-22 MS27490-22 MS27493-22M MS27490-22M MS27493-22D MS27490-22D
Wire rAnGe 12-14 12-14 16-20 16-20 20-24 20-24 22-26 22-26 24-28 24-28 22-28 22-28 10 10
crimP tooL And Accessory AFm8 mH860 WA23 (Pos) WA23 (die)
AssemBLy tooLs instALLinG DAK95-12B DAK95-12B remoVAL DRK95-12B DRK95-12B DRK95-16B DRK95-16B DRK95-20B DRK95-20B DRK95-22B DRK95-22B DRK95-22MB DRK95-22MB DRK95-22MB DRK95-22MB DRK95-10B DRK95-10B
86-3 86-3 86-7 86-7 86-6 86-4 86-6 86-4 86-6 86-4
DAK95-16B DAK95-16B DAK95-20B DAK95-20B DAK95-22B DAK95-22B DAK95-22MB DAK95-22MB DAK95-22MB DAK95-22MB DAK95-10B DAK95-10B
* hethreenumbersuffixonM39029seriescontactsisreferredtoasaBINcode.Seepage22forcolorstripeassociation. T ContactM39029/74-423(ShieldedSocket)#12cavity,solder. ContactM39029/75-416to422(ShieldedSocket)#12cavity,seepage79. ContactM39029/76-424to427(ShieldedPin)#16cavity,seepage79. ContactM39029/77-428to432(ShieldedSocket)#16cavity,seepage79. ContactM39029/78-433to425(ShieldedSocket)#16cavity,seepage79. ContactM39029/87isaThermocouple. ContactM39029/88isaThermocouple. ContactM39029/102(CoaxialPin)Size12. ContactM39029/103(CoaxialSocket)Size12.
PAGE 34
SeRieS 2 SUbheaDeR
low silhoueTTe CirCular BayoneT Coupling rear release ConTaCTs
connector P/n MS27472 MS27473 MS27474 MS27499 MS27508 MS27497 MS27484 descriPtion WALL MOUNT FLANGE RECEPTACLE STRAIGHT PLUG JAM NUT MOUNT RECEPTACLE BOX MOUNT RECEPTACLE BOX MOUNT FLANGE RECEPTACLE BACK PANEL WALL MOUNT RECEPTACLE RFI PLUG AERO ELECTRIC, AMPHENOL, HI REL, ITT CANNON, BURNDY, AMERICAN MICRO PRODUCTS, GLENAIR, HERMETIC SEAL CORPORATION, SEALTRON, SOURIAU, VEAM QPL sources
size (AWG) mAtinG end 12 12 16 16 20 20 22 22 22 22 tyPicAL contAct conFiGurAtion 22 22 Wire BArreL 12 12 16 16 20 20 22 22 22M 22M 22D 22D PArt numBer* (current) M39029/58-365 M39029/57-359 M39029/58-364 M39029/57-358 M39029/58-363 M39029/57-357 M39029/58-362 M39029/57-356 M39029/58-361 M39029/57-355 M39029/58-360 M39029/57-354 PArt numBer (suPerseeded) MS27493-12 MS27491-12 MS27493-16 MS27491-16 MS27493-10 MS27491-20 MS27493-22 MS27491-22 MS27493-22M MS27491-22M MS27493-22D MS27491-22D Wire rAnGe 12-14 12-14 16-20 16-20 20-24 20-24 22-26 22-26 24-28 24-28 22-28 22-28
contActs
Pin/soc. P S P S P S P S P S P S
tooL seLection Bin* 365 359 364 358 363 357 362 356 361 355 360 354 coLor ORANGE-BLUE-GREEN ORANGE-GREEN-WHITE ORANGE-BLUE-YELLOW ORANGE-GREEN-GRAY ORANGE-BLUE-ORANGE ORANGE-GREEN-VIOLET ORANGE-BLUE-RED ORANGE-GREEN-BLUE ORANGE-BLUE-BROWN ORANGE-GREEN-GREEN ORANGE-BLUE-BLACK ORANGE-GREEN-YELLOW AF8 TH163 TH163 TH163 TH163 TH163 TH163
AssemBLy tooLs instALLinG DAK95-12B DAK95-12B remoVAL DRK95-12B DRK95-12B DRK95-16B DRK95-16B DRK95-20B DRK95-20B DRK95-22B DRK95-22B DRK95-22MB DRK95-22MB DRK95-22MB DRK95-22MB
86-3 86-3 K43 K43 K42 K41 K42 K41 K42 K41 86-7 86-7 86-6 86-5 86-6 86-5 86-6 86-5
DAK95-16B DAK95-16B DAK95-20B DAK95-20B DAK95-22B DAK95-22B DAK95-22MB DAK95-22MB DAK95-22MB DAK95-22MB
* hethreenumbersuffixonM39029seriescontactsisreferredtoasaBINcode.Seepage22forcolorstripeassociation. T ContactM39029/27-210(ShieldedSocket)#12cavity,Inactive. ContactM39029/28-271(ShieldedPin)#12cavity,Inactive. ContactM39029/89isaThermocouple. ContactM39029/102(CoaxialPin)Size12.
PAGE 35
SeRieS 3 SUbheaDeR
Tri-sTarT Coupling CirCular rear release ConTaCTs
connector P/n D38999/20 D38999/24 & /34 D38999/26 D38999/29 & /31 D38999/35 D38999/36 descriPtion WALL MOUNT FLANGE RECEPTACLE JAM NUT MOUNT RECEPTACLE STRAIGHT PLUG LAYNARD RELEASE PLUG WALL MOUNT RECEPTACLE LAYNARD RELEASE PLUG size (AWG) contActs mAtinG end 12 12 16 16 20 20 22 22 tyPicAL contAct conFiGurAtion 22 22 22 22 10 10 tooL seLection Bin* 365 353 364 352 363 351 362 350 361 349 360 348 528 527 coLor ORANGE-BLUE-GREEN ORANGE-GREEN-ORANGE ORANGE-BLUE-YELLOW ORANGE-GREEN-RED ORANGE-BLUE-ORANGE ORANGE-GREEN-BROWN ORANGE-BLUE-RED ORANGE-GREEN-BLACK ORANGE-BLUE-BROWN ORANGE-YELLOW-WHITE ORANGE-BLUE-BLACK ORANGE-YELLOW-GRAY GREEN-RED-GRAY GREEN-RED-VIOLET AF8 TH163 TH163 TH163 TH163 TH163 TH163 K43 K43 K42 K40 K42 K40 K42 K40
1716P-1 (Complete Tool) 1716P-1 (Complete Tool)
QPL sources
AERO ELECTRIC, AMPHENOL , PYLE-NATIONAL, DEUTSCH, BURNDY, HI REL. ITT CANNON, VEAM, G&H TECHNOLOGY, AMERICAN MICRO PRODUCTS, HERMETIC SEAL CORPORATION, SEALTRON, GLENAIR, SOURIAU, SOCAPEX, AB CONNECTORS
Wire BArreL 12 12 16 16 20 20 22 22 22M 22M 22D 22D 10 10
Pin/soc. P S P S P S P S P S P S P S
PArt numBer* (current) M39029/58-365 M39029/56-353 M39029/58-364 M39029/56-352 M39029/58-363 M39029/56-351 M39029/58-362 M39029/56-350 M39029/58-361 M39029/56-349 M39029/58-360 M39029/56-348 M39029/58-528 M39029/56-527
PArt numBer (suPerseded) MS27493-12 MS27490-12 MS27493-16 MS27490-16 MS27493-20 MS27490-20 MS27493-22 MS27490-22 MS27493-22M MS27490-22M MS27493-22D MS27490-22D
Wire rAnGe 12-14 12-14 16-20 16-20 20-24 20-24 22-26 22-26 24-28 24-28 22-28 22-28 10 10
AssemBLy tooLs instALLinG DAK95-12B DAK95-12B remoVAL DRK95-12B DRK95-12B DRK95-16B DRK95-16B DRK95-20B DRK95-20B DRK95-22B DRK95-22B DRK95-22MB DRK95-22MB DRK95-22MB DRK95-22MB DRK95-10B DRK95-10B
86-3 86-3 86-7 86-7 86-6 86-4 86-6 86-4 86-6 86-4
DAK95-16B DAK95-16B DAK95-20B DAK95-20B DAK95-22B DAK95-22B DAK95-22MB DAK95-22MB DAK95-22MB DAK95-22MB DAK95-10B DAK95-10B
*ThethreenumbersuffixonM39029seriescontactsisreferredtoasaBINcode.Seepage22forcolorstripeassociation. ContactM39029/74-423(ShieldedSocket)#12cavity,solder. ContactM39029/75-416to422(ShieldedSocket)#12cavity,seepage79. ContactM39029/76-424to427(ShieldedPin)#16cavity,seepage79. ContactM39029/77-428to432(ShieldedSocket)#16cavity,seepage79. ContactM39029/78-433to425(ShieldedSocket)#16cavity,seepage79. ContactM39029/87isaThermocouple. ContactM39029/88isaThermocouple. ContactM39029/90,91,113and114,seeMIL-STD-1760onpage37. ContactM39029/102(CoaxialPin)Size12. ContactM39029/103(CoaxialSocket)Size12. ContactM39029/118and119HighHeat/VibrationEngineApplications.
PAGE 36
HEADER MIL-STD-1760
SUbheaDeR SeRieS iii VaRiation) (MiL-PRF-38999

MIL-STD 1760 provides a common, cross platform, mechanical, electrical, and digital interface between weapons/external equipment stores and aircraft. The standard MIL-STD-1760 connecter is used to transfer guidance information to weapons. The standard Connector for MIL-STD-1760 is D38999 Series III (Reference MIL-DTL-83538) Insert Arrangement #2520. Lanyard Release Plug (/31), and Jam Nut or Flange Mount Receptacles (Also Rail Launch Configuration is available).

PoWer contActs contAct PArt numBer M39029/58-363 M39029/56-351 M39029/58-363 M39029/56-351 M39029/58-363 M39029/56-351 M39029/58-363 M39029/56-351 tyPe Pin Soc Pin Soc Pin Soc Pin Soc size 20 20 16 16 12 12 10 10 CRIMP TOOL AFM8 AFM8 AF8 AF8 AF8 AF8 1716P-1 1716P-1 POSITIONER K43 K43 TH163 TH163 TH163 TH163 N/A (Included) N/A (Included) INSERTION TOOL* DAK264-20 DAK264-20 DAK264-16 DAK264-16 DAK264-12 DAK264-12 DAK264-10 DAK264-10 REMOVAL TOOL* DRK264-20 DRK264-20 DRK264-16 DRK264-16 DRK264-12 DRK264-12 DRK264-10 DRK264-10
coAXiAL contActs contAct PArt numBer M39029/28-211 M39029/75-416 M39029/28-409 M39029/75-417 tyPe PIN Soc Pin Soc size 12 12 12 12 inner crimP tooL & Positioner AFM8 AFM8 AFM8 AFM8 K323 K323 K323 K323 outer crimP tooL & Positioner GS200-1 GS200-1 GS200-1 GS200-1 G2P330 G2P330 G2P330 G2P330 insertion tooL* DAK264-12 DAK264-12 DAK264-12 DAK264-12 remoVAL tooL* DRK264-12 DRK264-12 DRK264-12 DRK264-12
* insertion and removal of Contacts in Mil-sTd-1760 applications require straight tools due to the restricted access of Lanyard Release Connectors. DAK264-XX Tweezer Type Tools have the same Tip configuration as the corresponding M81969/8-XXX Tools assigned to normal Contact Insertion and Removal operations in D38999, Series III Connectors.
dAtA Bus (concentric tWinAX) contActs contAct PArt numBer M39029/113-625** M39029/114-628*** tyPe Pin Soc size 8 8 inner crimP tooL & Positioner AFM8 AFM8 K709 K709 intermediAte And outer crimP tooL & die HX4 HX4 Y631 Cir/Indent Y631 Cir/Indent Y631 Hex Cavity Y631 Hex Cavity
All Size 8 Data Bus Contacts can be inserted with the DAK264-8 and Removed with DRK264-8 Straight Metal Tools (Tweezer Type) **Supersedes M39029/90-529, ***Supersedes M39029/91-530
dAtA Bus (concentric tWinAX) contActs - ALternAte desiGn miL-std-1760e contAct PArt numBer M39029/113-626 M39029/114-629 tyPe Pin Soc size 8 8 inner crimP tooL & Positioner AFM8 AFM8 K330-4 K330-4 intermediAte And outer crimP tooL & die HX4 HX4 Y1064 Y1064
All Size 8 Data Bus Contacts can be inserted with the DAK264-8 and Removed with DRK264-8 Straight Metal Tools (Tweezer Type)
ToolKitsareavailableforcompleteMIL-STD1760WiringSupport.ContactDMCforDetails LanyardRepairToolsandComponentsareavailablefromDMC.ContactCustomerServicefordetails.
PAGE 37
MIL-PRF-38999
SeRieS 4
BreeCh loCk Coupling CirCular rear release ConTaCTs
connector P/n D38999/40 D38999/42 D38999/44 D38999/46 D38999/47 D38999/47 descriPtion WALL MOUNT FLANGE RECEPTACLE BOX MOUNT FLANGE RECEPTACLE JAM NUT MOUNT RECEPTACLE STRAIGHT PLUG STRAIGHT PLUG CABLE MOUNT RECEPTACLE DEUTSCH G&H TECHNOLOGY QPL sources
size (AWG) contActs mAtinG end 12 12 16 16 20 20 22 22 Wire BArreL 12 12 16 16 20 20 22 22 22M 22M 22D 22D Pin/soc. P S P S P S P S P S P S PArt numBer* (current) M39029/58-365 M39029/56-353 M39029/58-364 M39029/56-352 M39029/58-363 M39029/56-351 M39029/58-362 M39029/56-350 M39029/58-361 M39029/56-349 M39029/58-360 M39029/56-348 PArt numBer (suPerseded) MS27493-12 MS27490-12 MS27493-16 MS27490-16 MS27493-20 MS27490-20 MS27493-22 MS27490-22 MS27493-22M MS27490-22M MS27493-22D MS27490-22D Wire rAnGe 12-14 12-14 16-20 16-20 20-24 20-24 22-26 22-26 24-28 24-28 22-28 22-28
22 22 22 22
tooL seLection Bin* 365 353 364 352 363 351 362 350 361 349 360 348 coLor ORANGE-BLUE-GREEN ORANGE-GREEN-ORANGE ORANGE-BLUE-YELLOW ORANGE-GREEN-RED ORANGE-BLUE-ORANGE ORANGE-GREEN-BROWN ORANGE-BLUE-RED ORANGE-GREEN-BLACK ORANGE-BLUE-BROWN ORANGE-YELLOW-WHITE ORANGE-BLUE-BLACK ORANGE-YELLOW-GRAY AF8 TH163 TH163 TH163 TH163 TH163 TH163
AssemBLy tooLs instALLinG DAK95-12B DAK95-12B remoVAL DRK95-12B DRK95-12B DRK95-16B DRK95-16B DRK95-20B DRK95-20B DRK95-22B DRK95-22B DRK95-22MB DRK95-22MB DRK95-22MB DRK95-22MB
86-3 86-3 K43 K43 K42 K40 K42 K40 K42 K40 86-7 86-7 86-6 86-4 86-6 86-4 86-6 86-4
DAK95-16B DAK95-16B DAK95-20B DAK95-20B DAK95-22B DAK95-22B DAK95-22MB DAK95-22MB DAK95-22MB DAK95-22MB
* hethreenumbersuffixonM39029seriescontactsisreferredtoasaBINcode.Seepage22forcolorstripeassociation. T ContactM39029/74-423(ShieldedSocket)#12cavity,solder. ContactM39029/75-416to422(ShieldedSocket)#12cavity,seepage79. ContactM39029/76-424to427(ShieldedPin)#16cavity,seepage79. ContactM39029/77-428to432(ShieldedSocket)#16cavity,seepage79. ContactM39029/78-433to425(ShieldedSocket)#16cavity,seepage79. ContactM39029/87isaThermocouple. ContactM39029/88isaThermocouple. ContactM39029/102(CoaxialPin)Size12. ContactM39029/103(CoaxialSocket)Size12.
PAGE 38
AS50151
SeRieS 3400
(FoRMERLy MIL-C-5015)
CirCular Threaded Coupling FronT release ConTaCTs

connector P/n MS3400 MS3401 MS3402 MS3404 MS3406 MS3408 MS3409 MS3412 descriPtion WALL MOUNT RECEPTACLE CABLE CONNECTING RECEPTACLE BOX MOUNT RECEPTACLE JAM NUT MOUNT RECEPTACLE STRAIGHT PLUG PLUG 90 PLUG 45 WALL MOUNT RECEPTACLE (AN TYPE) AERO-ELECTRIC CONNECTORS J-TECH, INC. ELECSYS, INC. QPL sources
size (AWG) contActs mAtinG end 0 0 4 4 8 8 12 12 12 12 Wire BArreL 0 0 4 4 8 8 12 12 16 16 16 16 22 22 Pin/soc. P S P S P S P S P S P S P S PArt numBer* (current) M39029/44-293 M39029/45-300 M39029/44-292 M39029/45-299 M39029/44-291 M39029/45-298 M39029/44-290 M39029/45-297 M39029/44-289 M39029/45-296 M39029/44-288 M39029/45-295 M39029/44-287 M39029/45-294 PArt numBer (suPerseded) MS90453-0-0 MS90454-0-0 MS90453-4-0 MS90454-4-0 MS90453-8-0 MS90454-8-0 MS90453-12-12 MS90454-12-12 MS90453-12-16 MS90454-12-16 MS90453-16-16 MS90454-16-16 MS90453-16-22 MS90454-16-22 Wire rAnGe 0-2* 0-2* 4-6* 4-6* 8-10* 8-10* 12-14 12-14 16-20 16-20 16-20 16-20 22-26 22-26
16 16 16 16
tooL seLection Bin* 293 300 292 299 291 298 290 297 289 296 288 295 287 294 coLor RED-WHITE-ORANGE ORANGE-BLACK-BLACK RED-WHITE-RED RED-WHITE-WHITE RED-WHITE-BROWN RED-WHITE-GRAY RED-WHITE-BLACK RED-WHITE-VIOLET RED-GRAY-WHITE RED-WHITE-BLUE RED-GRAY-GRAY RED-WHITE-GREEN RED-GRAY-VIOLET RED-WHITE-YELLOW TH1A** TH1A** TH1A** TH1A** TH1A** TH1A** TH1A** TH1A** AF8
crimP tooL And Accessory AFm8 mH860 WA23 (Pos) WA23-5 WA23-5 WA23-4 WA23-4 WA23-2 WA23-2 WA23 (die) WA23-13 WA23-13 WA23-11 WA23-11 WA23-9 WA23-9
AssemBLy tooLs instALLinG DAK55-0B DAK55-0B DAK55-4B DAK55-4B DAK55-8B DAK55-8B DAK55-12A** DAK55-12A** DAK55-12A** DAK55-12A** remoVAL DRK56-0B DRK56-0B DRK56-4B DRK56-4B DRK56-8B DRK56-8B DRK56-12A** DRK56-12A** DRK56-12A** DRK56-12A** DRK56-16A*** DRK56-16A*** DRK56-16A*** DRK56-16A***
86-2 86-2 86-2 86-2
DAK55-16A*** DAK55-16A*** DAK55-16A*** DAK55-16A***
PAGE 39
AS50151
SeRieS 3450
(FoRMERLy MIL-C-5015)
CirCular Threaded Coupling rear release ConTaCTs

connector P/n MS3450 MS3451 MS3452 MS3454 MS3456 MS3459 descriPtion WALL MOUNT RECEPTACLE CABLE CONNECTING RECEPTACLE BOX MOUNT RECEPTACLE JAM NUT MOUNT RECEPTACLE STRAIGHT PLUG SELF-LOCK COUPLING PLUG AERO-ELECTRIC CONNECTORS ITT CANNON J-TECH, INC. AMPHENOL CONNECTORS ELECSYS, INC. QPL sources
size (AWG) contActs mAtinG end 12 12 16 16 tyPicAL contAct conFiGurAtion 8 8 4 4 0 0 tooL seLection Bin* 213 219 212 218 214 220 coLor RED-BROWN-ORANGE RED-BROWN-WHITE RED-BROWN-RED RED-BROWN-GRAY RED-BROWN-YELLOW RED-RED-BLACK AF8 TH1A TH1A TH1A TH1A 86-2 86-2 WA23-9 WA23-9 WA23-2 WA23-2 Wire BArreL 12 12 16 16 8 8 4 4 0 0 Pin/soc. P S P S P S P S P S PArt numBer* (current) M39029/29-213 M39029/30-219 M39029/29-212 M39029/30-218 M39029/29-214 M39029/30-220 M39029/29-215 M39029/30-221 M39029/29-216 M39029/30-222 PArt numBer (suPerseded) M39029/29-12-12 or MS3162-12-12 M39029/30-12-12 or MS3163-12-12 M39029/29-16-16 or MS3162-16-16 M39029/30-16-16 or MS3163-16-16 M39029/29-8-8 M39029/30-8-8 M39029/29-4-4 M39029/30-4-4 M39029/29-0-0 M39029/30-0-0 AssemBLy tooLs WA23 (die) instALLinG DAK83-12B DAK83-12B DAK83-16B DAK83-16B BY HAND BY HAND remoVAL DRK83-12B DRK83-12B DRK83-16B DRK83-16B DRK250-8 OR M81969/14-06 DRK250-8 OR M81969/14-06 DRK250-4 OR M81969/14-07 DRK250-4 OR M81969/14-07 DRK250-0 OR M81969/14-08 DRK250-0 OR M81969/14-08 Wire rAnGe 12-14 12-14 16-20 16-20 8 8 4 4 0 0
crimP tooL And Accessory AFm8 mH860 WA23 (Pos)
215 221
RED-BROWN-GREEN RED-RED-BROWN
WA23-11 WA23-11
WA23-4 WA23-4
BY HAND BY HAND
216 222
RED-BROWN-BLUE RED-RED-RED
WA23-13 WA23-13
WA23-5 WA23-5
BY HAND BY HAND
* hethreenumbersuffixonM39029seriescontactsisreferredtoasaBINcode.Seepage22forcolorstripeassociation. T ContactM39029/86isaThermocouple.
PAGE 40
MIL-C-81511
SeRieS 1
sCoop prooF CirCular BayoneT Coupling FronT release ConTaCTs
connector P/n
M81511/21 & /35 M81511/23 & /36 M81511/25 & /37 M81511/26 & /38
descriPtion
FLANGE MOUNT RECEPTACLE JAM NUT RECEPTACLE CABLE CONNECTING RECEPTACLE STRAIGHT PLUG
QPL sources
AMPHENOL
size (AWG) contActs mAtinG end

12 12 12 12 16 16 16 16 20 20 20 20 23 23 23 23 23 23 23 23
Wire BArreL
12 12 12 12 16 16 16 16 20 20 20 20 22 22 22 22 28 28 28 28
Pin/soc.
P P S S P P S S P P S S P P S S P P S S
PArt numBer* (current)

M39029/47-338 M39029/47-339 M39029/33-269 M39029/33-270 M39029/47-336 M39029/47-337 M39029/33-267 M39029/33-268 M39029/47-315 M39029/47-316 M39029/33-265 M39029/33-266 M39029/47-313 M39029/47-314 M39029/33-263 M39029/33-264 M39029/47-311 M39029/47-312 M39029/33-261 M39029/33-262
PArt numBer (suPerseded)

MS90461A12-12 or MS90461B12-12 MS3343A12-12 or MS3343B12-12 MS90461A16-16 or MS90461B16-16 MS3343A16-16 or MS3343B16-16 MS90461A20-20 or MS90461B20-20 MS3343A20-20 or MS3343B20-20 MS90461A23-22 or MS90461B23-22 MS3343A23-22 or MS3343B23-22 MS90461A23-28 or MS90461B23-28 MS3343A23-28 or MS3343B23-28
Wire rAnGe
12-14 12-14 12-14 12-14 16-20 16-20 16-20 16-20 20-24 20-24 20-24 20-24 22-26 22-26 22-26 22-26 28-32 28-32 28-32 28-32
tooL seLection Bin*

338 339 269 270 336 337 267 268 315 316 265 266 313 314 263 264 311 312 261 262
crimP tooL And Accessory AF8

TH199S TH199S TH199S TH199S TH199S TH199S TH199S TH199S TH199S TH199S TH199S TH199S K60S K60S K60S K60S K60S K60S K60S K60S
AssemBLy tooLs WA23 (die) instALLinG

DAK126-12A DAK126-12A DAK126-12A DAK126-12A DAK126-16A DAK126-16A DAK126-16A DAK126-16A DAK126-20A DAK126-20A DAK126-20A DAK126-20A DAK126-23A DAK126-23A DAK126-23A DAK126-23A DAK126-23A DAK126-23A DAK126-23A DAK126-23A
coLor
ORANGE-ORANGE-GRAY ORANGE-ORANGE-WHITE RED-BLUE-WHITE RED-VIOLET-BLACK ORANGE-ORANGE-BLUE ORANGE-ORANGE-VIOLET RED-BLUE-VIOLET RED-BLUE-GRAY ORANGE-BROWN-GREEN ORANGE-BROWN-BLUE RED-BLUE-GREEN RED-BLUE-BLUE ORANGE-BROWN-ORANGE ORANGE-BROWN-YELLOW RED-BLUE-ORANGE RED-BLUE-YELLOW ORANGE-BROWN-BROWN ORANGE-BROWN-RED RED-BLUE-BROWN RED-BLUE-RED
AFm8
mH860
WA23 (Pos)
remoVAL
86-12S 86-12S 86-12S 86-12S 86-11S 86-11S 86-11S 86-11S
ContactM39029/6-125(ShieldedPin)#12cavity,seepage78. ContactM39029/13-152(ShieldedSocket)#16cavity,seepage78. ContactM39029/13-153to157(ShieldedSocket)#12cavity,seepage78. ContactM39029/14-159(ShieldedSocket)#16cavity,seepage78. ContactM39029/14-160to163(ShieldedSocket)#12cavity,seepage78.
PAGE 41
MIL-C-81511
SeRieS 2
50% sCoop prooF CirCular BayoneT Coupling FronT release ConTaCTs
connector P/n
M81511/1 & /31 M81511/3 & /32 M81511/5 & /33 M81511/6 & /34
descriPtion
FLANGE MOUNT RECEPTACLE JAM NUT MOUNT RECEPTACLE CABLE CONNECTING RECEPTACLE STRAIGHT PLUG
QPL sources
AMPHENOL
size (AWG) contActs mAtinG end

12 12 12 12 16 16 16 16 20 20 20 20 23 23 23 23 23 23 23 23
Wire BArreL
12 12 12 12 16 16 16 16 20 20 20 20 22 22 22 22 28 28 28 28
Pin/soc.
P P S S P P S S P P S S P P S S P P S S
PArt numBer* (current)

M39029/47-338 M39029/47-339 M39029/46-309 M39029/46-310 M39029/47-336 M39029/47-337 M39029/46-307 M39029/46-308 M39029/47-315 M39029/47-316 M39029/46-305 M39029/46-306 M39029/47-313 M39029/47-314 M39029/46-303 M39029/46-304 M39029/47-311 M39029/47-312 M39029/46-301 M39029/46-302
PArt numBer (suPerseded)

MS90461A12-12 or MS90461A12-12 MS90460A12-12 or MS90460B12-12 MS90461A16-16 or MS90461B16-16 MS90460A16-16 or MS90460B16-16 MS90461A20-20 or MS90461B20-20 MS90460A20-20 or MS90460B20-20 MS90461A23-22 or MS90461B23-22 MS90460A23-22 or MS90460B23-22 MS90461A23-28 or MS90461B23-28 MS90460A23-28 or MS90460B23-28
Wire rAnGe
12-14 12-14 12-14 12-14 16-20 16-20 16-20 16-20 20-24 20-24 20-24 20-24 22-26 22-26 22-26 22-26 28-32 28-32 28-32 28-32
tooL seLection Bin*

338 339 309 310 336 337 307 308 315 316 305 306 313 314 302 304 311 312 301 302
crimP tooL And Accessory AF8

TH199S TH199S TH199S TH199S TH199S TH199S TH199S TH199S TH199S TH199S TH199S TH199S K60S K60S K60S K60S K60S K60S K60S K60S
AssemBLy tooLs WA23 (die) instALLinG

DAK126-12A DAK126-12A DAK126-12A DAK126-12A DAK126-16A DAK126-16A DAK126-16A DAK126-16A DAK126-20A DAK126-20A DAK126-20A DAK126-20A DAK126-23A DAK126-23A DAK126-23A DAK126-23A DAK126-23A DAK126-23A DAK126-23A DAK126-23A
coLor
ORANGE-ORANGE-GRAY ORANGE-ORANGE-WHITE ORANGE-BLACK-WHITE ORANGE-BROWN-BLACK ORANGE-ORANGE-BLUE ORANGE-ORANGE-VIOLET ORANGE-BLACK-VIOLET ORANGE-BLACK-GRAY ORANGE-BROWN-GREEN ORANGE-BROWN-BLUE ORANGE-BLACK-GREEN ORANGE-BLACK-BLUE ORANGE-BROWN-ORANGE ORANGE-BROWN-YELLOW ORANGE-BLACK-RED ORANGE-BLACK-YELLOW ORANGE-BROWN-BROWN ORANGE-BROWN-RED ORANGE-BLACK-BROWN ORANGE-BLACK-RED
AFm8
mH860
WA23 (Pos)
remoVAL
86-12S 86-12S 86-12S 86-12S 86-11S 86-11S 86-11S 86-11S
ContactM39029/6-125(ShieldedPin)#12cavity,seepage78.
PAGE 42
MIL-C-81511
SeRieS 3
sCoop prooF CirCular BayoneT Coupling rear release ConTaCTs
connector P/n M81511/41 M81511/45 M81511/46 M81511/49 descriPtion FLANGE MOUNT RECEPTACLE CABLE CONNECTING RECEPTACLE STRAIGHT PLUG JAM NUT MOUNT RECEPTACLE DEUTSCH QPL sources
size (AWG) contActs mAtinG end 12 12 16 16 16 20 20 20 22 22 tyPicAL contAct conFiGurAtion 23 23 23 23 Wire BArreL 12 12 16 16 16 20 20 20 22 28 22 22 28 28 Pin/soc. P S P S S P S S S S P S P S PArt numBer* (current) M39029/18-180 M39029/17-175 M39029/18-179 M39029/17-174 M39029/22-193 M39029/18-178 M39029/17-173 M39029/22-192 M39029/22-191 M39029/22-190 M39029/18-177 M39029/17-172 M39029/18-176 M39029/17-171 PArt numBer (suPerseded) M39029/18-12-12 M39029/17-12-12 M39029/18-16-16 M39029/17-16-16 M39029/22-16-16 M39029/18-20-20 M39029/17-20-20 M39029/22-20-20 M39029/22-22-22 M39029/22-22-28 M39029/18-23-22 M39029/17-23-22 M39029/18-23-28 M39029/17-23-28 Wire rAnGe 12-14 12-14 16-20 16-20 16-20 16-20 20-24 20-24 22-28 28-32 22-28 22-28 28-32 28-32
tooL seLection Bin* 180 175 179 174 193 178 173 192 191 190 177 172 176 171 coLor BROWN-GRAY-BLACK BROWN-VIOLET-GREEN BROWN-VIOLET-WHITE BROWN-VIOLET-YELLOW BROWN-WHITE-ORANGE BROWN-VIOLET-GRAY BROWN-VIOLET-ORANGE BROWN-WHITE-RED BROWN-WHITE-BROWN BROWN-WHITE-BLACK BROWN-VIOLET-VIOLET BROWN-VIOLET-RED BROWN-VIOLET-BLUE BROWN-VIOLET-BROWN TH343 TH343 AF8 TP360 TP365
AssemBLy tooLs instALLinG M81969/16-03 M81969/16-03 remoVAL M81969/16-03 M81969/16-03 M81969/16-02 M81969/16-02 M81969/16-02 M81969/16-01 M81969/16-01 M81969/16-01 M81969/16-04 M81969/16-04 M81969/16-04 M81969/16-04 M81969/16-04 M81969/16-04
K341 K343 K340 K342 K503 K330-3 K330-3 K338 K339 K338 K339
86-2 86-2 86-21 86-1S 86-1S 86-20 86-19 86-19
M81969/16-02 M81969/16-02 M81969/16-02 M81969/16-01 M81969/16-01 M81969/16-01 M81969/16-04 M81969/16-04 M81969/16-04 M81969/16-04 M81969/16-04 M81969/16-04
* hethreenumbersuffixonM39029seriescontactsisreferredtoasaBINcode.Seepage22forcolorstripeassociation. T ContactM39029/19-181(ShieldedPin)#16cavity,seepage78. ContactM39029/19-182to183(ShieldedPin)#12cavity,seepage78. ContactM39029/20-184(ShieldedSocket)#16cavity,seepage78. ContactM39029/20-185to186(ShieldedSocket)#12cavity,seepage78.
PAGE 43
MIL-C-81511
SeRieS 4
50% sCoop prooF CirCular rear release ConTaCTs
connector P/n M81511/51 M81511/53 M81511/55 M81511/56 descriPtion FLANGE MOUNT RECEPTACLE JAM NUT MOUNT RECEPTACLE CABLE CONNECTING RECEPTACLE STRAIGHT PLUG DEUTSCH QPL sources
size (AWG) contActs mAtinG end 12 12 16 16 16 20 20 20 22 22 tyPicAL contAct conFiGurAtion 23 23 23 23 Wire BArreL 12 12 16 16 16 20 20 20 22 28 22 22 28 28 Pin/soc. P S P S S P S S S S P S P S PArt numBer* (current) M39029/18-180 M39029/16-170 M39029/18-179 M39029/16-169 M39029/22-193 M39029/18-178 M39029/16-168 M39029/22-192 M39029/22-191 M39029/22-190 M39029/18-177 M39029/16-167 M39029/18-176 M39029/16-166 PArt numBer (suPerseded) M39029/18-12-12 M39029/16-12-12 M39029/18-16-16 M39029/16-16-16 M39029/22-16-16 M39029/18-20-20 M39029/16-20-20 M39029/22-20-20 M39029/22-22-22 M39029/22-22-28 M39029/18-23-22 M39029/16-23-22 M39029/18-23-28 M39029/16-23-28 Wire rAnGe 12-14 12-14 16-20 16-20 16-20 20-24 20-24 20-24 22-28 28-32 22-28 22-28 28-32 28-32
tooL seLection Bin* 180 170 179 169 193 178 168 192 191 190 177 167 176 166 coLor BROWN-GRAY-BLACK BROWN-VIOLET-BLACK BROWN-VIOLET-WHITE BROWN-BLUE-WHITE BROWN-WHITE-ORANGE BROWN-VIOLET-GRAY BROWN-BLUE-GRAY BROWN-WHITE-RED BROWN-WHITE-BROWN BROWN-WHITE-BLACK BROWN-VIOLET-VIOLET BROWN-BLUE-VIOLET BROWN-VIOLET-BLUE BROWN-BLUE-BLUE TH343 AF8 TP360 TP360
AssemBLy tooLs instALLinG M81969/16-03 M81969/16-03 remoVAL M81969/16-03 M81969/16-03 M81969/16-02 M81969/16-02 M81969/16-02 M81969/16-01 M81969/16-01 M81969/16-01 M81969/16-04 M81969/16-04 M81969/16-04 M81969/16-04 M81969/16-04 M81969/16-04
K341 K341 K340 K340 K503 K330-3 K330-3 K338 K338 K338 K338
86-2 86-2 86-21 86-20 86-19 86-19
M81969/16-02 M81969/16-02 M81969/16-02 M81969/16-01 M81969/16-01 M81969/16-01 M81969/16-04 M81969/16-04 M81969/16-04 M81969/16-04 M81969/16-04 M81969/16-04
* hethreenumbersuffixonM39029seriescontactsisreferredtoasaBINcode.Seepage22forcolorstripeassociation. T ContactM39029/21-187(ShieldedSocket)#16cavity,seepage78. ContactM39029/21-188to189(ShieldedSocket)#12cavity,seepage78.
PAGE 44
MIL-DTL-81659
SeRieS 1
reCTangular FronT release ConTaCTs
connector P/n M81659/1 THRU M81659/27
descriPtion RECEPTACLE OR PLUG, TYPE 1 AND 2 CLASS 1 AND 2 SHELL DESIGNATOR A OR B
QPL sources NO QPL SOURCES
size (AWG) contActs mAtinG end 16 16 Wire BArreL 16 16 Pin/soc. P S PArt numBer* (current) M39029/2-106 M39029/3-109 PArt numBer (suPerseded) M39029/2-16-16 M39029/3-16-16 Wire rAnGe 16-20 16-20
20 20
20 20
P S
M39029/2-105 M39029/3-108
M39029/2-20-20 M39029/3-20-20
20-24 20-24
22 22
22 22
P S
M39029/2-104 M39029/3-107
M39029/2-22-22 M39029/3-22-22
22-26 22-26
tooL seLection Bin* 106 109 105 108 104 107 coLor BROWN-BLACK-BLUE BROWN-BLACK-WHITE BROWN-BLACK-GREEN BROWN-BLACK-GRAY BROWN-BLACK-YELLOW BROWN-BLACK-VIOLET AF8 TH1A TH1A TH1A TH1A
crimP tooL And Accessory AFm8 mH860 86-2 86-2 K287 K287 K287 K287 WA23 (Pos) WA23 (die)
AssemBLy tooLs instALLinG DAK55-16A DAK55-16A Consult Factory Consult Factory Consult Factory Consult Factory remoVAL DRK56-16A DRK56-16A Consult Factory Consult Factory Consult Factory Consult Factory
PAGE 45
MIL-DTL-81659
SeRieS 2 (aRinc 404)
reCTangular rear release ConTaCTs
descriPtion RECEPTACLE OR PLUG, TYPE 2, 3 AND 4 CLASS 1 AND 2 SHELL DESIGNATOR A OR B
QPL sources TYCO ELECTRONICS ITT CANNON RADIALL, S.A.
size (AWG) contActs mAtinG end 12 12 16 16 Wire BArreL 12 12 16 16 Pin/soc. P S P S PArt numBer* (current) M39029/11-147 M39029/12-151 M39029/11-146 M39029/12-150 PArt numBer (suPerseded) M39029/11-12-12 M39029/12-12-12 M39029/11-16-16 M39029/12-16-16 Wire rAnGe 12-14 12-14 16-20 16-20
20 20
20 20
P S
M39029/11-145 M39029/12-149
M39029/11-20-20 M39029/12-20-20
20-24 20-24
22 22
22 22
P S
M39029/11-144 M39029/12-148
M39029/11-22-22 M39029/12-22-22
22-26 22-26
tooL seLection Bin* 147 151 146 150 145 149 144 148 coLor BROWN-YELLOW-VIOLET BROWN-GREEN-BROWN BROWN-YELLOW-BLUE BROWN-GREEN-BLACK BROWN-YELLOW-GREEN BROWN-YELLOW-WHITE BROWN-YELLOW-YELLOW BROWN-YELLOW-GRAY AF8 TP465 TP465 TH1A TH1A
AssemBLy tooLs instALLinG BY HAND BY HAND remoVAL DRK337 DRK337 M81969/1-03 M81969/1-03 M81969/1-02 M81969/1-02 M81969/1-01 M81969/1-01
86-2 86-2 K13-1 K13-1 K267-1 K267-1 86-30-1 86-30-1 86-137 86-137
M81969/1-03 M81969/1-03 M81969/1-02 M81969/1-02 M81969/1-01 M81969/1-01
PAGE 46
MIL-C-81703 HEADER
SeRieS 2 SUbheaDeR
CirCular raCk & panel or push pull Coupling FronT release ConTaCTs
connector P/n MS3140 MS3144 MS3147 MS3148 descriPtion WALL MOUNT FLANGE RECEPTACLE JAM NUT MOUNT RECEPTACLE STRAIGHT PLUG PLUG LANYARD COUPLING DEUTSCH QPL sources
size (AWG) contActs mAtinG end 12 12 Wire BArreL 12 12 Pin/soc. P S PArt numBer* (current) M39029/31-234 M39029/32-253 PArt numBer (suPerseded) MS3192-12-12A MS3193-12-12A Wire rAnGe 12-14 12-14
16 16
16 16
P S
M39029/31-228 M39029/32-247
MS3192-16-16A MS3193-16-16A
16-20 16-20
20 20
20 20
P S
M39029/31-223 M39029/32-242
MS3192-20-20A MS3193-20-20A
20-24 20-24
tooL seLection Bin* 234 253 228 247 223 242 coLor RED-ORANGE-YELLOW RED-GREEN-ORANGE RED-RED-GRAY RED-YELLOW-VIOLET RED-RED-ORANGE RED-YELLOW-RED AF8 TH1A TH1A TH1A TH1A TH1A TH1A
AssemBLy tooLs instALLinG DAK12B DAK12B remoVAL DRK12B DRK12B DRK16B DRK16B DRK20B DRK20B
86-2 86-2 K1S K1S 86-1S 86-1S
* hethreenumbersuffixonM39029seriescontactsisreferredtoasaBINcode.Seepage22forcolorstripeassociation. T ContactM39029/7-126(ShieldedPin)#12cavity,seepage78.
PAGE 47
MIL-C-81703
SeRieS 3
CirCular raCk & panel or push pull Coupling rear release ConTaCTs
connector P/n MS3445 MS3424 MS3446 MS3464 MS3467 MS3468 descriPtion PLUG RACK & PANEL WALL MOUNT FLANGE RECEPTACLE PLUG RACK & PANEL JAM NUT MOUNT RECEPTACLE STRAIGHT PLUG PLUG LANYARD COUPLING DEUTSCH QPL sources
size (AWG) contActs mAtinG end 12 12 12 12 16 16 tyPicAL contAct conFiGurAtion 16 16 20 20 Wire BArreL 12 12 16 16 16 16 20 20 20 20 Pin/soc. P S P S P S P S P S PArt numBer* (current) M39029/4-113 M39029/5-118 M39029/4-114 M39029/5-119 M39029/4-111 M39029/5-116 M39029/4-112 M39029/5-117 M39029/4-110 M39029/5-115 PArt numBer (suPerseded) M39029/4-12-12 M39029/5-12-12 M39029/4-12-16 M39029/5-12-16 M39029/4-16-16 M39029/5-16-16 M39029/4-16-20 M39029/5-16-20 M39029/4-20-20 M39029/5-20-20 Wire rAnGe 12-14 12-14 16-20 16-20 16-20 16-20 20-24 20-24 20-24 20-24
tooL seLection Bin* 113 118 114 119 111 116 112 117 110 115 coLor BROWN-BROWN-ORANGE BROWN-BROWN-GRAY BROWN-BROWN-YELLOW BROWN-BROWN-WHITE BROWN-BROWN-BROWN BROWN-BROWN-BLUE BROWN-BROWN-RED BROWN-BROWN-VIOLET BROWN-BROWN-BLACK BROWN-BROWN-GREEN AF8 TH1A TH1A TH1A TH1A TH1A TH1A TH1A TH1A TH1A TH1A
AssemBLy tooLs instALLinG DAK83-12B DAK83-12B DAK83-12B DAK83-12B remoVAL DRK83-12B DRK83-12B DRK83-12B DRK83-12B DRK83-16B DRK83-16B DRK83-16B DRK83-16B DRK83-20B DRK83-20B
86-2 86-2 K1S K1S K1S K1S 86-2 86-2 86-1S 86-1S
DAK83-16B DAK83-16B DAK83-16B DAK83-16B DAK83-20B DAK83-20B
PAGE 48
(aRinc 600) SUbheaDeR
reCTangular raCk and panel rear release ConTaCTs
descriPtion Receptacle or Plug Shell Size 2, 3, 4
QPL sources Tyco Electronics (AMP) Souriau ITT Cannon
size (AWG) contActs mAtinG end 22 22 20 20 16 16 tyPicAL contAct conFiGurAtion 12 12 Wire BArreL 22 22 20 20 16 16 12 12 Pin/soc. P S P S P S P S PArt numBer* (current) M39029/93-597 M39029/94-601 M39029/93-598 M39029/94-602 M39029/93-539 M39029/94-603 M39029/93-540 M39029/94-604 PArt numBer (suPerseded) Wire rAnGe 22-26 22-26 20-24 20-24 16-20 16-20 12-14 12-14
tooL seLection Bin* 597 601 598 602 539 603 540 604 coLor GREEN-WHITE-VIOLET BLUE-BLACK-BROWN GREEN-WHITE-GRAY BLUE-BLACK-RED GREEN-ORANGE-WHITE BLUE-BLACK-ORANGE GREEN-YELLOW-BLACK BLUE-BLACK-YELLOW TP585 TP585 TH1A TH1A TP465 TP465 AF8
crimP tooL And Accessory AFm8 K267-1 K267-1 K13-1 K13-1 mH860 86-137 86-137 86-30-1 86-30-1 86-2 86-2 WA23 (Pos) WA23 (die)
AssemBLy tooLs instALLinG M81969/1-01 M81969/1-01 M81969/1-02 M81969/1-02 M81969/1-03 M81969/1-03 remoVAL M81969/1-01 M81969/1-01 M81969/1-02 M81969/1-02 M81969/1-03 M81969/1-03 DRK337 DRK337
* hethreenumbersuffixonM39029seriescontactsisreferredtoasaBINcode.Seepage________forcolorstripeassociation. T ContactM39029/95-545(ShieldedSocket)#8Cavity,seepage79. ContactM39029/96-546(ShieldedPin)#8Cavity,seepage79. ContactM39029/97-547(ShieldedPin)#1Cavity,seepage79. ContactM39029/98-548(ShieldedSocket)#1Cavity,seepage79. ContactM39029/99-549(ShieldedSocket)#5Cavity,seepage79. ContactM39029/100-550(ShieldedSocket)#5Cavity,seepage79.
PAGE 49
SeRieS 2 SUbheaDeR
CirCular Threaded Coupling rear release ConTaCTs
connector P/n M83723/17 M83723/18 M83723/19 M83723/20 M83723/21 M83723/22 M83723/23 M83723/24 descriPtion CABLE CONNECTING RECEPTACLE SKT CONTACTS CABLE CONNECTING RECEPTACLE PIN CONTACTS WALL MOUNT RECEPTACLE SKT CONTACTS WALL MOUNT RECEPTACLE PIN CONTACTS BOX MOUNT RECEPTACLE SKT CONTACTS BOX MOUNT RECEPTACLE PIN CONTACTS PLUG SKT CONTACTS PLUG PIN CONTACTS AERO-ELECTRIC CONNECTORS ITT CANNON J-TECH, INC. AMPHENOL CONNECTORS ELECSYS, INC. QPL sources
size (AWG) mAtinG end Wire BArreL PArt numBer* (current) PArt numBer (suPerseded) Wire rAnGe
contActs
Pin/soc.
12 12
12 12
P S
M39029/29-213 M39029/30-219
M39029/29-12-12 M39029/30-12-12
12-14 12-14
16 16
16 16
P S
M39029/29-212 M39029/30-218
M39029/29-16-16 M39029/30-16-16
16-20 16-20
tooL seLection Bin* 213 219 212 218 coLor RED-BROWN-ORANGE RED-BROWN-WHITE RED-BROWN-RED RED-BROWN-GRAY AF8 TH1A TH1A TH1A TH1A
AssemBLy tooLs instALLinG DAK83-12B DAK83-12B remoVAL DRK83-12B DRK83-12B DRK83-16B DRK83-16B
86-2 86-2
DAK83-16B DAK83-16B
* hethreenumbersuffixonM39029seriescontactsisreferredtoasaBINcode.Seepage22forcolorstripeassociation. T ContactM39029/86isaThermocouple.
PAGE 50
MIL-DTL-83723
series 3
CirCular Bayonet and threaded Coupling rear release ContaCts
connector P/n M83723/71, /72, /82, /83, M83723/74, 73, /85, /84 M83723/76, /75, /77 M83723/87, /86, /78, /91. /95, /92, /96 descriPtion FLANGE MOUNT RECEPTACLE JAM NUT RECEPTACLE STRAIGHT PLUG, bAYONET AERO ELECTRIC, AMPHENOL, PYLE NATIONAL, DEUTSCH, J-TECH, HI-REL CONNECTORS, ITT CANNON, JOURIAU QPL sources
size (AWG) contActs mAtinG end 12 12 12 12 16 16 16 16 20 tyPicAL contAct conFiGurAtion 20 Wire BArreL 12 12 16 16 16 16 20 20 20 20 Pin/soc. P S P S P S P S P S PArt numBer* (current) M39029/4-113 M39029/5-118 M39029/4-114 M39029/5-119 M39029/4-111 M39029/5-116 M39029/4-112 M39029/5-117 M39029/4-110 M39029/5-115 PArt numBer (suPerseded) M39029/4-12-12 or M83723-33b12 M39029/5-12-12 or M83723-34b12 M39029/4-12-16 or M39029/5-12-16 M39029/4-16-16 or M83723-33b16 M39029/5-16-16 or M83723-34b16 M39029/4-16-20 or M39029/5-16-20 M39029/4-20-20 or M83723-33b20 M39029/5-20-20 or M83723-34b20 Wire rAnGe 12-14 12-14 16-20 16-20 16-20 16-20 20-24 20-24 20-24 20-24
tooL seLection Bin* 113 118 114 119 111 116 112 117 110 115 coLor bROWN-bROWN-ORANGE bROWN-bROWN-GRAY bROWN-bROWN-YELLOW bROWN-bROWN-WHITE bROWN-bROWN-bROWN bROWN-bROWN-bLUE bROWN-bROWN-RED bROWN-bROWN-VIOLET bROWN-bROWN-bLACK bROWN-bROWN-GREEN AF8 TH1A TH1A TH1A TH1A TH1A TH1A TH1A TH1A TH1A TH1A
AssemBLy tooLs instALLinG DAK83-12b DAK83-12b remoVAL DRK83-12b DRK83-12b DRK83-16b DRK83-16b DRK83-16b DRK83-16b DRK83-16b DRK83-16b DRK83-20b DRK83-20b
86-2 86-2 86-2 86-2 86-2 86-2 K1S K1S 86-1S 86-1S
DAK83-16b DAK83-16b DAK83-16b DAK83-16b DAK83-16b DAK83-16b DAK83-20b DAK83-20b
Contact Contact Contact Contact
M39029/27-402 M39029/28-409 M39029/73-396 M39029/74-399
to to to to
408 415 398 401
(Shielded (Shielded (Shielded (Shielded
Socket) #12 cavity, see page 79. Pin) #12 cavity, see page 79. Socket) #12 cavity, solder termination. Pin) #12 cavity, solder termination..
PAGE 51
HEADER MIL-DTL-83733 sUbheaDer

reCtangular miniature raCK and panel rear release ContaCts
connector P/n M83733/1 M83733/2 M83733/3 M83733/4 M83733/5 M83733/6 M83733/7 M83733/8 M83733/9 M83733/10 M83733/11 M83733/12
descriPtion STANDARD HOLE MOUNT GUIDE PINS AND SPRING MOUNT GUIDE SOCKETS CAPTIVE SPRINGS bUSHING MOUNT CLINCH NUT MOUNT GUIDE SKTS AND SPRING MOUNT GUIDE PINS STAGGERED STANDARD HOLE MOUNT STAGGERED bUSHING MOUNT STAGGERED CLINCH NUT MOUNT STAGGERED SPRING MOUNT
QPL sources
DELPHI CONNECTION SYSTEMS
size (AWG) contActs mAtinG end 12 12 16 16 20 20 tyPicAL contAct conFiGurAtion 22 22 Wire BArreL 12 12 16 16 20 20 22D 22D Pin/soc. P S P S P S P S PArt numBer* (current) M39029/4-113 M39029/5-118 M39029/4-111 M39029/5-116 M39029/4-110 M39029/5-115 M39029/58-360 M39029/57-354 PArt numBer (suPerseded) M39029/4-12-12 M39029/5-12-12 M39029/4-16-16 M39029/5-16-16 M39029/4-20-20 M39029/5-20-20 MS27494-22D MS27492-22D Wire rAnGe 12-14 12-14 16-20 16-20 20-24 20-24 22-28 22-28
tooL seLection Bin* 113 118 111 116 110 115 360 354 coLor bROWN-bROWN-ORANGE bROWN-bROWN-GRAY bROWN-bROWN-bROWN bROWN-bROWN-bLUE bROWN-bROWN-bLACK bROWN-bROWN-GREEN ORANGE-bLUE-bLACK ORANGE-GREEN-YELLOW AF8 TH1A TH1A TH1A TH1A TH1A TH1A
AssemBLy tooLs instALLinG M81969/14-04 M81969/14-04 remoVAL M81969/14-04 M81969/14-04 M81969/14-03 M81969/14-03 M81969/14-02 M81969/14-02 M81969/14-01 M81969/14-01
86-2 86-2 K1S K1S K42 K41 86-1S 86-1S 86-6 86-5
M81969/14-03 M81969/14-03 M81969/14-02 M81969/14-02 M81969/14-01 M81969/14-01
*The three number suffix on M39029 series contacts is referred to as a BIN code. See page 22 for color stripe association. Contact Contact Contact Contact M39029/50-340 (Shielded Pin) #12 cavity, see page 79. M39029/51-341 (Shielded Socket) #12 cavity, see page 79. M39029/87 is a Thermocouple. M39029/89 is a Thermocouple.
PAGE 52
MIL-C-85028
series as
reCtangular individual ContaCt sealing polariZed Center JaCK sCreW pull thru insertion ContaCts**
connector P/n M85028/1 M85028/2
descriPtion CRIMP REMOVAbLE PIN CONTACTS CRIMP REMOVAbLE SKT CONTACTS
QPL sources DELPHI CONNECTION SYSTEMS
size (AWG) contActs mAtinG end 16 16 16 16 16 16 Wire BArreL 16 16 20 20 24 24 Pin/soc. P S P S P S PArt numBer* (current) M39029/70-389 M39029/69-386 M39029/70-388 M39029/69-385 M39029/70-387 M39029/69-384 PArt numBer (suPerseded) M39029/70-3 M39029/69-3 M39029/70-2 M39029/69-2 M39029/70-1 M39029/69-1 Wire rAnGe 16-20 16-20 20-24 20-24 24-28 24-28
tooL seLection Bin* 389 386 388 385 387 384 coLor ORANGE-GRAY-WHITE ORANGE-GRAY-bLUE ORANGE-GRAY-GRAY ORANGE-GRAY-GREEN ORANGE-GRAY-VIOLET ORANGE-GRAY-YELLOW AF8 TP651 TP651 TP651 TP651 TP651 TP651
AssemBLy tooLs instALLinG** DAK1-16P DAK1-16S DAK1-16P DAK1-16S DAK1-16P DAK1-16S remoVAL DRK222 DRK222 DRK222 DRK222 DRK222 DRK222
*The three number suffix on M39029 series contacts is referred to as a BIN code. See page 22 for color stripe association. ** Due to the sealing grommet on the contact wire barrel, it requires a special tool which is inserted through the connector, attached to the mating end of the contact, and then pulled into the connector. A release on the tool is actuated and the tool can be removed from the contact.
PAGE 53
HEADER AS81714 sUbheaDer

terminal JunCtions
connector P/n M81714/1 M81714/2 M81714/3 M81714/4 M81714/6 M81714/7 M81714/8 M81714/9 M81714/11 M81714/12 M81714/15
descriPtion FEEDbACK TYPE SIZE 22 FEEDbACK TYPE SIZE 20 FEEDbACK TYPE SIZE 16 FEEDbACK TYPE SIZE 12 FEEDbACK TYPE SIZE 22 FEEDbACK TYPE SIZE 20 FEEDbACK TYPE SIZE 16 FEEDbACK TYPE SIZE 12 SPLICES DOUbLE SPLICES TERMINAL GROUNDING
QPL sources
AMPHENOL-PCD, AMP TYCO DME ELECTRONICS DEUTSCH
size (AWG) contActs mAtinG end 12 14 16 16 20 Wire BArreL 12 16 20 22 22D Pin/soc. P P P P P PArt numBer* (current) M39029/1-103 M39029/1-102 M39029/1-101 M39029/1-100 M39029/1-507 PArt numBer (suPerseded) M39029/1-12-12 M39029/1-14-16 M39029/1-16-20 M39029/1-16-22 M39029/1-20-22D Wire rAnGe 12-14 16-20 20-24 22-26 22-28
tooL seLection Bin* 103 102 101 100 507 coLor bROWN-bLACK-ORANGE bROWN-bLACK-RED bROWN-bLACK-bROWN bROWN-bLACK-bLACK GREEN-bLACK-VIOLET AF8 TH1A TH1A TH1A
AssemBLy tooLs instALLinG DAK83-12b DAK83-16b remoVAL DRK83-12b DRK83-16b DRK83-20b M81969/14-11 M81969/14-01
K287 K287 K496-1
DAK83-20b M81969/14-11 M81969/14-01
*The three number suffix on M39029 series contacts is referred to as a BIN code. See page 22 for color stripe association.
PAGE 54
HEADER MIL-STD-1549 sUbheaDer

Common terminal system
connector P/n
descriPtion
QPL sources NO QPL SOURCES
size (AWG) contActs mAtinG end 12 16 20 22 22 Wire BArreL 12 16 20 22 28 Pin/soc. S S S S S PArt numBer* (current) M39029/22-605 M39029/22-193 M39029/22-192 M39029/22-191 M39029/22-190 PArt numBer (suPerseded) M39029/22-16-16 M39029/22-20-20 M39029/22-22-22 M39029/22-22-28 Wire rAnGe 12-14 16-20 20-24 28-32 28-32
tooL seLection
crimP tooL And Accessory WA23 (Pos) WA23 (die)
AssemBLy tooLs
Bin* 103 102 101 100 507
coLor bROWN-bLACK-ORANGE bROWN-bLACK-RED bROWN-bLACK-bROWN bROWN-bLACK-bLACK GREEN-bLACK-VIOLET
AF8 TH1A TH1A TH1A
AFm8
mH860
instALLinG DAK83-12b DAK83-16b
remoVAL DRK83-12b DRK83-16b DRK83-20b M81969/14-11 M81969/14-01
K287 K287 K496-1
DAK83-20b M81969/14-11 M81969/14-01
*The three number suffix on M39029 series contacts is referred to as a BIN code. See page 22 for color stripe association.
PAGE 55
Header Left Removal Tools Installing and

Subheadline
DMC is dedicated to serving the connector tooling needs of the electronics industry. We, therefore, continue our connector product package with a wide variety of installing and removal tools. Although we supply both plastic and metal tools, we recommend the use of the metal tools because of their durability. When used properly they are more cost effective in that they withstand thousands of contact insertion and removal cycles. The trend to all metal tools is being actively encouraged by most departments of the government. DMC installing and removal tools are of proven high quality and reliability. In addition to the tools listed in the reference table, we have many more for other connector applications. Consult factory for details. Illustrated on page 57 are typical rear and front release retention methods found in todays connectors.
M81969/# RefeRence chaRt

miL+ 81969/# 1-01 1-02 1-03 1-04 2-01 suPerceded miLtAry # MS3156-22 MS3156-20 M24308/18-2 MS3156-16 M24308/18-3 M24308/18-1 MS3323-22 MS3323-20 MS3323-16 MS3323-12 MS3344-23 MS3344-20 MS3344-16 MS3344-12 MS3342-23 MS3342-20 MS3342-16 MS3342-12 M55301/106-01 M55302/105-01 M21097/18-01 M21097/12-01 M55302/79-01 MS27495A22M M55302/79-02 MS27495R22M MS27495A22 MS27495R22 MS27495A20 MS27495R20 MS27495A16 MS27495R16 MS27495A12 MS27495R12 M55302/18-01
M55302/86-01
miL+ 81969/# 11-01 13-01 14-01 14-02
suPerceded miLtAry # M28731/22-01 M28731/21-01 MS27534-22D MS27534-20 MS3447-20 M83723/31-20 MS27534-16 MS3447-16 M83723/31-16 MS27534-12 MS3447-12 M83723/31-12 MS3483-1 MS3483-2 MS3483-3 MS3160-20 MS3160-16 MS3160-12 MS3160-22 MS90455-16 MS90455-12 MS24256A20 MS24256A16 MS24256A12 MS90455-8 MS90455-4 MS90455-0 MS17805 MS90456-16 MS90456-12 MS90456-8 MS90456-4 MS90456-0 MS24256R20 MS24256R20
MS24256R16
miL+ 81969/# 19-09 19-10 19-11 20-01 27-01 27-02 27-03 27-04 27-05 27-06 28-01 28-02 29-01 29-02 29-03 29-04 30-01 30-02 30-03 30-04 30-05 30-06 30-07 31-01 31-02 31-03 31-04 31-05 31-06 31-07 31-08 31-09 31-10
suPerceded miLtAry # MS24256R12 MS24256RH20 MS24256RH16 MS17806 MS90562-1 MS90562-2 MS90562-3 MS90562-4 MS90562-5 MS90562-6 MS3178-001 MS3178-002 MS3165-16 MS3165-8 M83723/32-08 MS3165-4 M83723/32-04 MS3165-0 M83723/32-00 MS3159-22 MS3159-20 MS3159-16 MS3159-12 MS3448-001A MS3448-001b MS3448-001C MS18137-20-1 MS18137-20-2 MS18137-20-3 MS18137-20-4 MS14035-02 MS14035-03 MS14035-01 MS14036-01 MS14036-02
MS14036-03
IMAGE: INS/REM Tools DMC1155
2-02 2-03 2-04 3-01 3-02 3-03 3-04 3-05 3-06 3-07
14-03
14-04 15-01 15-02 15-03 16-01 16-02 16-03 16-04 17-01 17-02 17-03 17-04 17-05 17-06 17-07 17-08 18-01 19-01 19-02 19-03 19-04 19-05 19-06 19-07 19-08
DMc1155 GeneRal PuRPose InseRtIon anD ReMoval tool KIt

DMCs General Purpose Insertion and Removal Tool Kit contains metal insertion and removal tools for common Mil-Spec Circular Connectors, D-Subminiature Connector, ARINC Connectors and AS81714 terminal junctions. Consult DMC for further details.
3-08 4-01 5-01 6-01 7-01 8-01 8-02 8-03 8-04 8-05 8-06 8-07 8-08 8-09 8-10 9-01 10-01
PAGE 56
www.DMCTools.CoM
Installing and Removal Tool Illustrations

Straight (ILL. 1) and joggled tools (ILL. 2) hold contact and wire in line with center or side of the tool handle. Tool sizes are 0 to 24 gage. Handles are color coded aluminum. Tools range from 4 12" to 6" long with replaceable tips.
InstallInG tools
ILL. 1 ILL. 2
fRont ReMoval, ReaR InstallInG tools
ReaR ReMoval anD InstallInG tWeeZeRs
ReaR Release PlIeRs
Both front removal (ILL. 3) and rear installing (ILL. 4) Military Standard tools offer a convenient and practical approach to servicing the MIL-C-81511, Series 1 & 2 connectors. Tools are color coded for contact size with half-inch hex metal handles.
Tools are for sizes 8 to 24 contacts. Used in NAS 1599, MIL-PRF-38999 and other rear release connectors.
ILL. 8
This tool unlocks MIL-C-005015 contacts and sizes are 0, 4 and 8 gage.
ILL. 3 ILL. 4
ILL. 9
ILL. 11
fRont Release
unWIReD contact tools
Front release connecters are easily serviced with these military spec removal tools. Handles are color coded for contact size. Replaceable tips are available. REF: MIL-C-005015, MIL-DTL-26482, MIL-C-26500,ILL. 5 and MIL-C-26636 Connectors.
ILL. 6
Tool removes unwired contacts from connectors and is available in two styles. The metal style employs a locking wedge and removes contacts from terminal block as well as from the connectors. The Military Standard tools use plastic probes which are interchangeable and available in sizes 12, 16, 20 (MS3448-001 kit) and 12 through 22 (MS3159), series NAS 1599 and MIL-C-81511, Series 3 and 4.
lonG-slot tools
This long-slot tool illustrates the standard for MIL-C-005015 installing tools. Modified versions are available on request.
ILL. 12
fRont ReMoval sPRInGloaDeD PRoBe contact tools (Ill. 7)

ILL. 7
Employing the floating tip concept, these tools offer quality, as well as ease in operation. Body and handle are anodized aluminum alloy and color coded. Replaceable tips are available and require no special installing tools.
ILL. 10
www.DMCTools.CoM
PAGE 57
MIL-I-81969 Tool Part Number Guide

miLitAry P/n
M81969/1-01 M81969/1-02 M81969/1-03 M81969/1-04 M81969/2-01 M81969/2-02 M81969/2-03 M81969/2-04 M81969/3-01 M81969/3-02 M81969/3-03 M81969/3-04 M81969/3-05 M81969/3-06 M81969/3-07 M81969/3-08 M81969/4-01 M81969/4-02 M81969/5-01 M81969/7-01 M81969/8-01 M81969/8-02 M81969/8-03 M81969/8-04 M81969/8-05 M81969/8-06 M81969/8-07 M81969/8-08 M81969/8-09 M81969/8-10 M81969/8-11 M81969/8-12 M81969/8-13 M81969/8-14 M81969/8-205b M81969/8-206b M81969/8-207 M81969/8-208 M81969/8-209 M81969/8-210 M81969/12-01 M81969/12-02 M81969/14-01 M81969/14-02 M81969/14-03 M81969/14-04 M81969/14-05 DAK52 DAK95-22Mb DRK95-22Mb DAK95-22b DRK95-22b DAK95-20b DRK95-20b DAK95-16b DRK95-16b DAK95-12b DRK95-12b DAK95-10b DRK95-10b DAK95-8b DRK95-8b DAK83-20b DRK83-20b DAK83-16b DRK83-16b DAK83-12b DRK83-12b DRK248A DRK246A M81969/14-01 M81969/14-02 M81969/14-03 M81969/14-04 M81969/14-05
dmc P/n
M81969/1-01 M81969/1-02 M81969/1-03 M81969/1-04 DAK126-23A DAK126-20A DAK126-16A DAK126-12A DRK129-23A DRK129-20A DRK129-16A DRK129-12A DRK125-23A DRK125-20A DRK125-16A DRK125-12A
instALLAtion or remoVAL
I/R I/R I/R I/R I I I I R R R R R R R R WRAP POST WRAP POST WRAP POST I I R I R I R I R I R I R I R I R I R I R I/R I/R I/R I/R I/R I/R I/R
size
22 20 16 22D 22 20 16 12 23 20 16 12 23 20 16 12
coLor code
GRN/WHT RED/WHT bLU/WHT GRN/WHT YEL RED bLU YEL YEL RED bLU YEL YEL/bLK RED/bLK bLU/bLK YEL/bLK
miLitAry P/n
dmc P/n
M81969/14-10 M81969/14-11 DRK250-8 DRK250-4 DRK250-0 81515-20 81515-16 81515-12 81515-23 DAK55-16A DAK55-12A DAK20b DAK16b DAK12b DAK55-8b DAK55-4b DAK55-0b DAK83S-20 DAK123A DAK123-22A DRK16b DRK12b DRK56-8b DRK56-4b DRK56-0b DRK20b DRK20A DRK16A DRK12A DHK20A DHK16A DRK124A DRK124-22A DHK368 DRK222 DAK1-16P-S DAK1-16S-S DRK178-1A DRK178-2A DRK178-3A DRK178-4A DRK178-5A DRK178-6A DRK310 DRK337 DRK656 CIET16-9 DRK337
I/R I/R R R R I/R I/R I/R I/R I I I I I I I I I I I R R R R R R R R R R R R R I/R R I I R R R R R R R R R R R
size
20 20 8 4 1/0 20 16 12 23 16 12 20 16 12 8 4 0 20 16/20 22 16 12 8 4 0 20 20 16 12 20 16 16 22 16 16 16 16 4/0 2/0 1/0 2 4 6 COAX 12 8 16 12
coLor code
RED/ORA RED/WHT NONE NONE NONE RED/WHT bLU/WHT YEL/WHT GRN/WHT bLU YEL RED bLU YEL RED bLU YEL RED GRN GOLD bLU YEL RED bLU YEL RED RED bLU YEL RED bLU GRN N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A bLU N/A
N/A 22D 22M 22 22 20 20 16 16 12 12 10 10 8 8 20 20 16 16 12 12 N/A N/A 22D 20 16 12 10
CLEAR GRN GRN/WHT bRN bRN/WHT RED RED/WHT bLU bLU/WHT YEL YEL/WHT GRN GRN RED RED RED/bLK RED/WHT/ bLK bLU/bLK bLU/WHT/ bLK YEL/bLK YEL/WHT/ bLK STRAIGHT ANGLED GRN/WHT RED/WHT bLU/WHT YEL/WHT GRA/WHT
M81969/18-02 M81969/19-01 M81969/19-02 M81969/19-03 M81969/19-04 M81969/19-05 M81969/19-06 M81969/19-07 M81969/19-08 M81969/19-09 M81969/19-10 M81969/19-11 M81969/20-01 M81969/20-02 M81969/21-01 M81969/22-01 M81969/23-01 M81969/23-02 M81969/27-01 M81969/27-02 M81969/27-03 M81969/27-04 M81969/27-05 M81969/27-06 M81969/28-01 M81969/28-02 M81969/28-03 M81969/29-01 M81969/28-02
PAGE 58
www.DMCTools.CoM
MIL-I-81969 Tool Part Number Guide

miLitAry P/n
M81969/28-03 M81969/29-01 M81969/29-02 M81969/29-03 M81969/29-04 M81969/30A-01 M81969/30A-02 M81969/30A-03 M81969/30A-04 M81969/30A-05 M81969/30A-06 M81969/30A-07 M81969/30b-01 M81969/30b-02 M81969/30b-03 M81969/30b-04 M81969/30b-05 M81969/30b-06 M81969/30b-07 M81969/30b-08 M81969/30b-09 M81969/30b-10 M81969/30b-11 M81969/30b-12 M81969/30b-13
dmc P/n
DRK656 CIET16-9 M81969/14-06 M81969/14-07 M81969/14-08 DRK130-22A DRK130-20A DRK130-16A DRK130-12A DRK110-20 DRK110-16 DRK110-12 DRK501b DRK502b DRK503b DRK504b DRK505b DRK506b DRK507b DRK508b DRK509b DRK510b DRK511b DRK512b DRK513b
R R R R R R R R R R R R R R R R R R R R R R R R R
size
8 16 8 4 0 22 20 16 12 20 16 12 22 20 16 12 20 16 12 22D 22M 22 20 16 12
coLor code
N/A bLU RED bLU YEL YEL RED bLU YEL RED bLU YEL bLK/YEL bLK/RED bLK/bLU bLK/YEL SIL/RED SIL/bLU SIL/YEL bRN/bRN bRN/YEL bRN/GRN bRN/RED bRN/bLU bRN/YEL
miLitAry P/n
M81969/30b-19 M81969/30b-20 M81969/30b-21 M81969/30b-22 M81969/30b-23 M81969/30b-24 M81969/30b-25 M81969/30b-26 M81969/30b-27 M81969/30b-28 M81969/30b-29 M81969/30b-30 M81969/30b-31 M81969/30b-32 M81969/30b-33 M81969/30b-34 M81969/30b-35 M81969/30b-36 M81969/33-01 M81969/33-02 M81969/34-01 M81969/39-01
dmc P/n
DRK519b DRK520b DRK521b DRK522b DRK523b DRK524b DRK525b DRK526b DRK527b DRK528b DRK529b DRK530b DRK531b DRK532b DRK533b DRK534b DRK535b DRK536b DAK55-22SA DAK55-22JA DRK56-22A M81969/39-01
R R R R R R R R R R R R R R R
size
coLor code
UNWIRED TOOL SET HANDLE 22 20 16 12 20 16 12 22D 22M 22 20 16 12 YEL RED bLU YEL RED bLU YEL bRN YEL GRN RED bLU YEL
UNWIRED REMOVAL TOOL SET UNWIRED REMOVAL TOOL SET UNWIRED REMOVAL TOOL SET I I R I/R 22 22 22 20 RED RED RED GRN/WHT
aBBRevIatIons
I Installation Tool R Removal Tool
I/R Installation and Removal Tool N/A Not Available
tyPIcal fRont Release contact
tyPIcal ReaR Release contact
www.DMCTools.CoM
PAGE 59
Plastic Installing and Removal Tool Part Number Guide

PLASTIC INSTALLATION & REMOVAL TOOLS MILITARY P/N MANUFACTURERS P/N COLOR CODE SIZE APPLICATION EQUIVALENT METAL TOOL PLASTIC INSTALLATION & REMOVAL TOOLS MILITARY P/N MANUFACTURERS P/N COLOR CODE SIZE APPLICATION EQUIVALENT METAL TOOL
MILDTL-83723 All Plastic Tools
83723/31-12
Yellow Ins. White Rem. Blue - Ins.
83723 83723 83723 83723 83723 83723 83723 83723 83723 83723 MIL-DTL-24308 22 MIL-DTL-81659 Series II MIL-DTL-24308 20 MIL-DTL-81659 Series II MIL-DTL-81659 Series II
DAK83-12B DRK83-12B DAK83-16B DRK83-16B DAK83-20B DRK83-20B DAK95-22S DRK95-22S DAK95-22MS DRK95-22MS DAK2666J DRK2666J DAK145 DRK145 DAK83-16B DRK83-16B
MIL-I-81969 All Plastic Tools M81969/14-02
Red - Ins. White Rem. 20
MIL-DTL-83733 MIL-T-81714 (Size 20 & 22) MIL-PRF-38999 DAK95-16B DRK95-16B AS50151 (MS3450 Series) DAK83-16B DRK83-16B
83723/31-16
White Rem. Red - Ins.
83723/31-20
White Rem. Brown Ins. White Rem. Black - Ins.
Blue - Ins. M81969/14-03 White Rem. 16
MIL-DTL-26482 Series II MIL-C-81703 Series III MIL-DTL-83723 MIL-T-81714 MIL-DTL-83733 MIL-DTL-81659
83723/31-22
83723/31-22D
White Rem. Green - Ins.
MIL-I-81969 * Plastic body with metal tips M81968/1-01*
MIL-PRF-38999
DAK95-12B
White Rem. Red - Ins.
DRK95-12B AS50151 (MS3450 Series) M81969/14-04 Yellow Ins. White Rem. 12 MIL-C-81703 Series III MIL-T-81714 Series III MIL-DTL-83723 MIL-DTL-83723 DAK83-12B DRK83-12B
M81968/1-02*
White Rem. Blue - Ins.
M81968/1-03*
White Rem. Green - Ins.
16
MIL-DTL-24308 22D
DAK95-22MB DRK95-22MB
M81968/1-04*
White Rem.
MIL-DTL-26482 Series II MIL-DTL-81659 Gray - Ins. M81969/14-05 M81969/14-06 White Rem. Red - Rem. Blue Rem. Yellow Rem. Brown Ins. White Rem. Red - Ins. M81969/14-10 Orange Rem. 20 10 8 4 0 AS50151 AS50151 AS50151 MIL-C-55302/169, /171 only 22 DRK95-22S MIL-PRF-38999 DAK95-20B DRK95-20B DAK95-22S MIL-PRF-38999 DAK95-10B DRK95-10B DRK250-8 DRK250-4
MIL-PRF-38999 MIL-DTL-24308 Green - Ins. White Rem 22D MIL-DTL-83733 MIL-T-81714 MIL-C-55302/68/69 MIL-PRF-38999
DAK95-22MB DRK95-22MB
M81969/14-07 M81969/14-08
DAK95-20B DRK95-20B
M81969/14-09
Red - Ins. M81969/14-02 White Rem. 20
MIL-DTL-26482 Series II MIL-C-81703 Series III MIL-DTL-83723 Series I & III
DAK83-20B DRK83-20B
Verify QPL status (if required) at time of purchase.

PAGE 60
PLASTIC INSTALLATION & REMOVAL TOOLS MILITARY P/N MANUFACTURERS P/N COLOR CODE SIZE APPLICATION
EQUIVALENT METAL TOOL
PlastIc tools vs. DMc Metal tools
MIL-DTL-26482 Series II MIL-C-81703 Series III 20 MIL-DTL-83723 Series I & III MIL-DTL-83733 MIL-T-81714 (Size 20 & 22) M81969/14-12 M81969/29-01 M81969/29-02 M81969/29-03 M81969/29-04 Green Rem. Blue Rem. Red - Rem. Blue Rem. Yellow Rem. Green - Ins. M81969/39 White Rem. 8 16 8 4 0 MIL-PRF-38999 AS50151 AS50151 AS50151 AS50151 MIL-DTL-24308 (Size 20) AS50151 AS50151 AS50151 White Rem. Yellow Ins. MS27534-16 White Rem. Blue - Ins. MS27534-20 White Rem. Red - Ins MS27534-22 White Rem. Brown Ins. MS27534-22D White Rem. Black - Ins. MS27534-22M White Rem. Black - Ins. NAS 1664-12 Yellow Ins. White Rem. NAS 1664-16 Blue - Ins. White Rem. NAS 1664-20 Red - Ins. White Rem. MIL-PRF-38999 NAS 1599 Connector NAS 1599 Connector NAS 1599 Connector NAS 1599 Connector NAS 1599 Connector NAS 1599 Connector MIL-PRF-38999 MIL-PRF-38999 MIL-PRF-38999 MIL-PRF-38999 MIL-PRF-38999 MIL-PRF-38999 MIL-PRF-38999 MIL-PRF-38999 MIL-PRF-38999 MIL-PRF-38999
DAK83-20B DRK83-20B
Red - Ins. White Rem.
Plastic tools are used throughout the industry. DMCs policy is to give our customers the greatest savings for the best quality tools we manufacture metal tools, although initially more costly, offer a quality product and a lower tooling cost in servicing electrical connectors. Please refer to our cross-reference lists for any plastic to metal replacement equivalents you may need. The tools are available in two basic lengths with a metal or plastic insertion foot.
DRK264-8 DRK83-16B DRK250-8 DRK250-4 DRK250-0 DAK145 DRK145 DRK250-0 DRK250-4 DRK250-8 DRK95-12B DAK95-12B DRK95-16B DAK95-16B DRK95-20B DAK95-20B DRK95-22B DAK95-22B DRK95-22MB DAK95-22MB DRK95-22MB DAK95-22MB DAK83-12B DRK83-12B DAK83-16B DRK83-16B DAK83-20B DRK83-20B
M81969/29
MS3165-0 MS3165-4 MS3165-8 MS27534-12
All Plastic Tools

M81969/14
All Plastic Tools
www.DMCTools.CoM
PAGE 61
Header Left Contact Retention Test Tools Subheadline
tooL PArt numBer
rAnGe Pounds
HT250-1 HT250-2 HT250-3 HT250-4 Typical application showing tool testing pin contacts. The quality assurance test most often overlooked is retention (proper seating of contacts). This important test can now be performed simply and in a matter of seconds with the DMC retention testing tools. These tools are for checking the retention of pins and sockets in electrical connectors. The tester pin and socket tips are aluminum. All tips are replaceable. A nylon hand protector is provided with each tool. The tools can be preset at the factory to your request. Insert tester into or over a contact so that the tester and contact are in a straight line. Hold in this position throughout the test. Use pin end with a socket contact and the socket end with a pin contact. Apply pressure to tester until the indicator band is covered by the slide. If contact is still firmly retained, the retention is satisfactory. HT250-5 HT250-6
1.5 THRU 3.0 3.2 THRU 5.5 4.0 THRU 8.0 7.0 THRU 18.0 17.0 THRU 25.0 24.0 THRU 40.0
Notice: The above part numbers apply to retention tools only (less tips). All tips must be purchased under separate part number.
contAct size
coLor code
socket tester
Pin tester
12 16 20 22, 22M, 22D 23
Yellow blue Red brown black
67-012-01 67-016-01 67-020-01 67-022-01 67-023-01
68-012-01 68-016-01 68-020-01 68-022-01 68-023-01
PAGE 62
www.DMCTools.CoM
Header Right Contact Gages Subheadline

contact RetentIon test tool calIBRatIon equIPMent
The RTCG-75 Retention Tester Calibration Gage is supplied to support in-house calibration of DMC HT250 Series Retention Testers. It incorporates the latest Alphatron digital test technology, and is self-contained and portable. The tester is supplied in a protective case with calibration certificate to NIST (accuracy 0.5% full scale to 75 pounds force).
contact GaGes
Contact Gages are used to determine the size of a contacts mating end (sizes 12-22) which then aids in selecting the proper installation and/or removal tooling. Gage size of a contact is determined by matching a contact gage with the contact mating end and noting the size of the best fitting gage. To gage pins, start with the smallest gage and work your way up the scale; the first gage that fits over the pin is the size of that pin. To gage sockets, start with the largest gage and work your way down the scale; the first gage that fits inside the socket is the size of that socket. The gage sizes are stamped on the tool and all contact gages are color coded for correct size identification. The gage end used for measuring socket contacts is marked with an S. And the gage end used for measuring pin contacts is marked with a P. CAUTION: These tools are not to be used as a pin straightener.
socKet GaGe PIn GaGe
P/n
CG12 CG16 CG20 CG22
size
12 16 20 22
coLor
YELLOW bLUE RED bRONZE
PIn
socKet
Connectors may contain several different size contacts.

PAGE 63
www.DMCTools.CoM
Unwired Contact Removal Tools (M81969/30)

PlastIc-PRoBe unWIReD contact ReMoval tools
Removing unwired contacts can be difficult. It is very important not to damage the interfacial seal and/or connector insert when removing an unwired contacts. M81969/30 Series Plastic Probe Tools are ideal for removing unwired contacts from connectors. As the plastic probe slides into the connector, it disengages the contact locking mechanism and stretches over the contact, gripping it securely in the plastic probe. Different colored tool probes and probe bands are used to distinguish between series and contact sizes.
Metal-PRoBe unWIReD contact anD BRoKen WIRe ReMoval tools

When a wire breaks inside the connector the remaining wire strands can damage the plastic tips of DMCs standard unwired contact removal tools. To solve this problem, DMC engineered the DRK276 series of metal tip removal tools for removing broken wire contacts. Instead of different colored probes and bands, the DRK276 series removal tools have different colored tool bodies to help distinguish between tip sizes.
PLAstic-ProBe unWired contAct remoVAL tooLs tooL PArt numBer connector series ProBe PArt numBer DRK105-22D-2 DRK105 MIL-PRf-38999 Series 1 - 4 MIL-DTL-24308 MIL-DTL-55302/68 MIL-DTL-55302/71 MIL-DTL-55302/75 MIL-DTL-83733 (size 22D only) DRK105-22M-2 DRK105-22-2 DRK105-20-2 DRK105-16-2 DRK105-12-2 MIL-DTL-83733 (except size 22D) MIL-DTL-83723 Series 3 MIL-DTL-26482 Series 2 MIL-C-81511 (class L only) DRK110-20-2 ProBe size 22D 22M 22 20 16 12 20 ProBe coLor brown Yellow Green Red blue Yellow Red ProBe BAnd coLor brown brown brown brown brown brown Silver
DRK110
DRK110-16-2
16
blue
Silver
METAL-PRObE UNwIRED CONTACT REMOVAL TOOLS ConneCtor SerieS tool Part number DRK276-12 MILPRF-38999 Series 1 - 4 DRK276-16 DRK276-20 DRK276-22 DRK276-22M DRK276-22D Probe Size 12 16 20 22 22M 22D body Color Yellow Blue Red Brown Green Black
DRK110-12-2 DRK130-22-2
12 22 20 16 12 20 16 12
Yellow Yellow Red blue Yellow Red blue Yellow
Silver black black black black Green Green Green
DRK130
MIL-C-81511 Series 3 & 4 (except class L)
DRK130-20-2 DRK130-16-2 DRK130-12-2 DRK150-20-2
DRK150
AS50151 Series MS3450
DRK150-16-2 DRK150-12-2
PAGE 64
www.DMCTools.CoM
BETA Backshell Accessory Torque Tools
DMC offers a complete line of Adapter Tools and Torque Tools for holding and torquing circular connectors during the installation and removal of accessories (backshell, strain relief, or EMI/RFI shielding hardware). The evolution of circular connectors has produced many mechanical configurations which have more precise dimensional tolerances and electrical characteristics than any other mechanical
component used in modern electrical systems. The associated tooling must meet the same level of precision to apply the connector to its intended purpose. Until now, very little attention has been focused on the tooling which is used to mount strain-relief backshells and other accessories to wired connector assemblies. This is why the BETA Connector Mate system was developed.
This unique concept is based upon adaptor tools which are configured to mate with a specific connector series and shell size regardless of keying arrangement. They may be used simply as hand holding devices for easy tightening, or, for more exact requirements, DMC offers a wide variety of circular wrenches, strap wrenches, torque meters, and vises which can be used in a variety of combinations.
Visit our web site at www.DMCTools.com/Catalog/BETA.htm or ask for our BETA catalog.
www.DMCTools.CoM
PAGE 65
EMI/RFI Band Application System for M85049/128 Shield Termination Bands

THE PNEUMATIC BAND APPLICATION TOOL
is a cost effective system that speeds production and improves ergonomic conditions which are present when manual tools are used. Band tension is precisely applied by a dependable pneumatic system which is consistent and repeatable. The tension system of the pneumatic band tool is adjustable, and can be checked by use of the verifcation devices available from DMC. (See pages 68-69.) The cutter blade and other components of the DMC Pneumatic Band tools are interchangeable with the same series hand tools. The rugged design and field replaceable blades make the PBT/PMBT series the best choice for production applications where EMI/RFI bands are used to terminate wire harness shielding. The termination of EMI/RFI shielding materials is a specialized science in todays aerospace wiring systems. Application tooling is a critical factor in the overall performance of the wiring system components. DMC has worked closely with the worlds leading connector accessory manufacturers to develop the necessary tooling and accessories to meet the stringent demands of aerospace and defense system contractors. The resulting products afford the user many benefits which include: COMPATIBILITY with all currently available termination bands and systems. RELIABILITY through the use of commercially proven components and tool design practice. QUALITY and REPEATABILITY which are assured by a tension system. SERVICE AND CALIBRATION All tools produced by DMC are adjustable, and may be easily checked and set by the user. Also, expendable components such as cut-off blades are available for simple replacement by the user. LONG SERVICE LIFE Properly maintained band application tools will produce thousands of reliable terminations. AFFORDABILITY DMC tools continue to be the most cost effective method to produce reliable wiring system shield terminations. Models are available for .250 in. (6.350 mm) and .125 in. (3.175 mm) wide bands from all current suppliers to M85049/128.
ONE-STEP BANDING TOOL SYSTEM

DMCs One-Step Banding Tools are compatible with M85049/128-03, M85049/128-04, M85049/128-07 and M85049/128-08 bands. These tools tension, fold, and cut the band. Contact DMC for One-Step Tool information and part numbers. one-step tool application
TWO-STEP BANDING TOOL SYSTEM

DMCs Two-Step Banding Tools are compatible with all currently available bands. These tools tension and cut the band and leave an extended cut off tab. The second step provides an extra level of security by utilizing a roll-over tool to bend the cut off tab over a full 180 degrees. The hand tools meet the requirements of AS81306/2-01 and AS81306/2-02. Two-step tool application
THE HAND OPERATED BAND APPLICATION TOOL (REfERENCE AS81306/2)

is an excellent choice for many production and maintenance operations. Like the power driven models, they too can be calibrated by the user to provide reliable terminations throughout the service life. The lightweight construction and small nose profile enable the user to apply termination bands in even the tightest of working areas.
PAGE 66
www.DMCTools.CoM
Two-Step Banding Tool System
DBS-1100 & DBS-1200 (M81306/2-01 & M81306/2-02) HAND OPERATED BAND APPLICATION TOOLS
The DBS series Hand Actuate Tools (AS81306/2) are designed to apply all currently available AS85049/128 bands. These tools are constructed to survive the demands of production and maintenance use, and remain precisely adjusted to provide a quality band termination. The tension-lock system gives the operator a positive indication when the precise tension has been reached. DBs-1100 .250 wide Band Application Tool: Size and Weight: 5.5" x 7.5", .36 lbs. Tension Range: 140160 lbs. Cut-off blade: replaceable with DBS-1100-7 DBs-1200 .125 wide Mini-Band Application Tool: Size and Weight: 5.5" x 7.5", .52 lbs. Tension Range: 80100 lbs. Cut-off blade: replaceable with DBS-1100-7
PBT1100 & PMBT1200 PNEUMATIC BAND APPLICATION TOOLS

The PBT1100 & PMBT1200 series Pneumatic Band Application Tools are lightweight, dependable, and easy to operate. Many of the components are interchangeable with the corresponding hand tool. DMCs Pneumatic Two-Step Banding Tools are compatible with all currently available bands to M85049/128. PBT1100 .250 wide Band Application Tool Size and Weight: 8.75" L, 1.52 lbs. Calibration Range: 140160 lbs. Hose Length: 10 foot Cut-off blade: replaceable with DBS-1100-7 PMBT1200 .125 wide Mini-Band Application Tool Size and Weight: 8.75" L x 1.52 lbs. Calibration Range: 80100 lbs. Hose Length: 10 foot Cut-off blade: replaceable with DBS-1200-7
DBS-RO3 ROLL-OVER fOR .250 WIDE BANDS APPLICATION TOOL

The DMC Roll-Over Tool (Part No. DBS-RO3) is used to fold the extended band tab securely over the buckle. Experts agree that the folded tab method assures maximum strength and reliability. Like other DMC Band Application Tools, the Roll-Over Tool is compatible with all currently available bands.
DMC also provides the DBS-RO5 Roll-Over Tool for use with .125 wide Mini-Bands. This tool is similar to the DBS-RO3 in overall size and shape.
VERIfICATION Of TWO-STEP EMI/RfI BAND TOOLS

All the DMC Hand and Pneumatic Band Application Tools may be calibrated to insure correct band tension. The DBS-CG1 Laboratory Calibration Instrument will allow the operator to measure the exact tension produced by the tool. A short piece of unused band material is fed into the tool far enough to fully engage the gripping mechanism. The other end is then inserted and latched into the DBS-CG1. Full tension is exerted by the tool and read directly on the precision dial indicator portion of the DBS-CG1. Simple adjustments can be made to the tool as needed. A quick release mechanism is provided to allow the operator to easily remove the tool from the DBS-CG1. A free standing holding fixture is available (DBS-CG1-F) to aid the calibration process by securing the DBS-CG1 and banding tool in place. Field Verification Fixtures and Go/No-Go Gages were developed to allow the user a quick means of tool tension in the field. A band is placed into the calibration fixture. The band is drawn through the tool until the nose of the banding tool is firmly against the field verification fixture. Once the full banding pressure has been applied, insert the GO side of the Gage into the verification slot of the field verification fixture. If it does not insert freely, the tool is exerting excessive force. Likewise, if the NO-GO probe freely enters the verification slot, the tool requires adjustment.
www.DMCTools.CoM
PAGE 67
Band Application System Part Numbers

TWO-STEP APPLICATION TOOLS, ACCESSORIES AND COMPONENTS
.250 standard Width Band tools DBS-1100 DBS-1101 AS8103/2-XX Hand Operated Band Tool Hand Operated Band Application Tool Set (includes DBS-1100, DBS-R03) Hand Operated Band Application Tool Set (includes DBS-1100, DBS-R03, DBS-CG2 & G691) Tension Adjustment Key AS8103/2-XX Replacement Blade for .250 Band Tools Roll-Over Tool for .250 Band Tab .125 Width Mini-Band tools DBS-1200 AS8103/2-XX Hand Operated Mini Band Tool Hand Operated Mini Band Application Tool Set (includes DBS-1200, DBS-RO5) Hand Operated Mini Band Application Tool Set (includes DBS-1200, DBS-RO5, DBS-CG3 & G752) AS8103/2-XX Replacement Blade for .125 Band Tools Roll-Over Tool for .125 Band Tab M85049/128-7 M85049/128-8
as85049/128 Band identification chaRt

Band P/n M85049/128-1 M85049/128-2 M85049/128-3 M85049/128-4 M85049/128-5 M85049/128-6 configuration Folded Buckle, Flat Folder Buckle, Curled Stamped Buckle, Flat Stamped Buckle, Curled Folded Buckle, Flat Folder Buckle, Curled Stamped Buckle, Flat Stamped Buckle, Curled Width .250 .250 .250 .250 .125 .125 .125 .125 terMinate With 2 Step Only 2 Step Only 1 or 2 Step Tools 1 or 2 Step Tools 2 Step Only 2 Step Only 1 or 2 Step Tools 1 or 2 Step Tools 4-1380 4-1553 4-1376 4-1377 4-1378 4-1379
Bands & Rings

M85049/128-01 .250 wide x 14.0 long EMI/ RFI Band (Flat)* M85049/128-02 .125 wide x 14.0 long EMI/ RFI Band (Flat)* .500 Dia. Split Ring Set .750 Dia. Split Ring Set 1.00 Dia. Split Ring Set 1.50 Dia. Split Ring Set
DBS-1102 DBS-1100-32 DBS-1100-7 DBS-RO3
DBS-1201
DBS-1202
as85049/128 tooL identification chaRt tool P/n M81036/1-01 M81036/1-02 M81036/1-01A M81036/1-02B M81036/2-01 M81036/2-02 M81036/2-03 M81036/2-04 M81036/2-01A descriPtion 1 Step Band Tool 1 Step Band Tool Verification Inspection Gage Verification Inspection Gage 2 Step Band Tool 2 Step Band Tool Roll Over Tool Roll Over Tool Set: Verification Gage & Compression Fixture Set: Verification Gage & Compression Fixture Width .250 .125 .250 .125 .250 .125 .250 .125 .250 dMc P/n** Consult DMC Consult DMC Consult DMC Consult DMC DBS-1100** DBS-1200** DBS-R03 DBS-R05 DBS-CG1
DBS-1100-7 DBS-RO5
PneuMatic Band tools for .250 Width Bands PBT1100 Pneumatic Band Application Tool
PneuMatic Band tools for .125 Width Bands PMBT1200 Pneumatic Band Application Tool
tool verification instruMentation DBS-CG1 Laboratory Verification Instrument for 1100 & 1200 series band tools DBS-CG1 Holding Fixture (Banding tool & DBS-CG1 not included) Field Verification Fixture for DBS-1100 Go/No-Go Gage for DBS-CG2 Fixture AS8103/2-XX Verification Set which includes DBS-CG2 & G691 Field Verification Fixture for DBS-1200 Go/No-Go Gage for DBS-CG3 Fixture AS8103/2-XX Verification Set which includes DBS-CG3 & G752 Banding aPPlication Kit DMC1379 DMC60A AS8103/2-XX .250 Banding Tool Kit Complete EMI/RFI Shielding Maintenance/Repair System (AS8103/2-XX .250 bands and tools)
DBS-CG1-F DBS-CG2 G691 DBS-CG2A DBS-CG3 G752 DBS-CG3A
M81036/2-02B
.125
DBS-CG2
* Band can also be supplied curled (contact factory) **The DMC Two Step Band Tools are recommended for Military stystems use where multi-source band procurement limits the use of the One Step Tools. Consult DMC for details.
The DBS-CG1-F holding fixture secures the laboratory calibration instrument and banding tool in place during calibration. This fixture only works with the DBS-CG1 Calibration Instrument. (Banding tools and DBS-CG1 are sold separately.)
PAGE 68
www.DMCTools.CoM
MIL Spec Circular Indent Crimp Tools

ModeLs: Mh801, Mh802, Mh803, Mh804, gs100-1 & gs200-1
When special conditions call for a new tool design, we make every effort to utilize the components of existing tools which have been proven reliable both in field use and controlled test programs. Such is the case with this tool series. The design of certain shielded contacts requires two additional crimping operations. One for the shield crimp sleeve, the other for the outer body. All of the tools give a concentric circular crimp configuration required by certain shielded contacts to insure compatibility with connector inserts and installing or removal tools in rear release applications, and/or maintain consistent electric impedance. Thus an indenter pattern which conforms to the appropriate military drawing (see chart for specific part numbers) was adapted to our familiar standard and miniature tool frames. (Note: On the MH801 MH802, MH803, and MH804 tools, in addition to the four opposing indenters these tools also have four retainers which encompass the contact prior to the initiation of the crimping operation thus assuring concentricity.) A full complement of positioners, inspection gages, and other accessories are available for these tool frames. The GS100-1 & GS200-1 tools are approximately 9 34 x 2 12 x 1 14 and weigh 15 oz each. The MH801, MH802, MH803, & MH804 tools are 6 34 in length and weigh approximately 10 oz each. The technical section on pages 78 to 79 list the part numbers of standard M39029 contacts which require these tools; however, the concept may be adapted to other applications. Consult factory for specific details. Pneumatic versions of these tools are also available. See page 12 or our Web site for details.
MILITARY P/N M22520/4-01 M22520/4-02
DMC P/N GS100-1 GP295 GS100
DESCRIPTION TOOL FRAME POSITIONER TOOL FRAME & POSITIONER GAGE PNEuMATIC TOOL FRAME TOOL FRAME POSITIONER TOOL FRAME & POSITIONER GAGE PNEuMATIC TOOL FRAME TOOL FRAME POSITIONER POSITIONER POSITIONER GAGE (INDENTERS) GAGE (RETAINERS) TOOL FRAME POSITIONER POSITIONER GAGE (RETAINERS) TOOL FRAME POSITIONER POSITIONER POSITIONER GAGE (RETAINERS) TOOL FRAME POSITIONER POSITIONER GAGE (RETAINERS)
NSN 5120-01-335-8576 5120-01-335-8640
PURPOSE Outer Contact Size 16 MIL-C-39029/76 Pin, /77 Skt, /78 Skt
M22520/3-2
G120 WA27T
5220-00-116-1911 Outer Contact Size 16 5120-01-335-8577 5120-01-416-4799 5120-00-117-4709 5220-01-518-3433 Outer Contact Size 12 5120-00-124-3490 5120-00-124-3351 5120-00-124-3341 5120-01-335-8644 --5120-00-124-3469 5120-00-124-3147 5120-00-124-3142 -5120-00-124-3484 5120-00-124-3381 5120-00-124-3384 5120-00-124-3422 -5120-00-124-3487 5120-01-335-8650 5120-00-124-3458 Shield Crimp Sleeve Size 12 MIL-C-39029/19 Pin, /21 Skt MIL-C-39029/20 Skt Outer Contact Size 12 MIL-C-39029/19 Pin MIL-C-39029/21 Skt MIL-C-39029/20 Skt Shield Crimp Sleeve Size 16 MIL-C-39029/19 Pin MIL-C-39029/20 Skt, 21 Skt Outer Contact Size 16 MIL-C-39029/19 Pin, MIL-C-39029/21 Skt MIL-C-39029/20 Skt Outer Contact Size 12 MIL-C-39029/27 Skt, /28 Pin, /75 Skt
M22520/31-01 M22520/31-02
GS200-1 G2P330 GS200
M22520/3-15
G443 WA27R
MH801 D16P-1M D16S-1M D16LS-1M G256 G257 MH802 D16/1-1M D16/2-1M G258 MH803 D12P-1M D12S-1M D12LS-1M G259 MH804 D12/1-1M D12/2-1M G260
www.DMCTools.CoM
PAGE 69
Open Frame Crimp Tools

M22520/5-01 (HX4) M22520/10-01 (HX3)
The DMC HX4 and HX3 series crimp tools feature a system of interchangeable dies which eliminate the need for separate fixed die crimp tools for each and every different application. Many maintenance and production organizations have standardized on one of these models, thus eliminating the cost associated with maintaining and calibrating bulky inventories of single purpose, dedicated tools. Tremendous flexibility and cost advantages exist with this crimping system due to the wide variety of military and proprietary interchangeable dies available for these tool frames. As new requirements evolve, a new set of dies is all thats required to meet the demand. Crimping dies are snapped into the tool frame and retained in place by internal spring clips. They may be permanently secured, if desired, by pressing a roll pin into the holes provided. The tool frames are equipped with a positive ratchet assembly which controls complete handle movement in both directions. Hexagonal crimp dies are available in a variety of combinations having single, double, and even triple cavity design. These dies accommodate most coaxial and triaxial connectors and contacts conforming to MIL-DTL-39012, AS39029, and numerous proprietary configurations. Other designs are available for coaxial connections requiring different termination techniques. Dies in various crimp patterns are also available for insulated and uninsulated terminal lugs, wire splices and end caps relating to M7928, MS17143, MS25036, MS25181, MS27429, MS25274, MS20659, M81824, MS21003 through MS21015, and commercial part numbers. Several power contacts too large for conventional hand tools are also covered by interchangeable dies for the standard tool frame (HX4). If your application requirement is not already covered by one of our standard dies our engineering department will be pleased to discuss a design to suit your needs. The HX4 is 11 in length and weighs approximately 21 oz. The HX3 is 9 in length and weighs 11 oz.
TYPICAL DIE SET
DMC169A (M83521/7-01) & DMC169 (M83507/9-01) TOOL KITS

The DMC169A and DMC169 tool kits consist of an HX4, Blade Micrometer, and 27 die sets. Each tool kit covers Mil-Spec shielding ferrules (MS21980/ MS21981) and Mil-Spec coaxial contacts (M39029/6/13/14, M39029/7/8, M83733/13/14 and 0N089558).
PAGE 70
www.DMCTools.CoM
M22520/5 & 110 Crimp Die Reference Chart

DIE P/N
DMC P/N * NATIONAL STOCK NO. N.S.N.
Open Frame Crimp Tool Part Numbers

DIE CLOSURE DIMENSIONS
A HEX. B HEX. DMC P/N *
DIE P/N
NATIONAL STOCK NO. N.S.N.
DIE CLOSURE DIMENSIONS

A HEX. B HEX.
MILITARY P/N
LENGTH
LENGTH
MILITARY P/N
LENGTH
LENGTH
HX4 Y200P Y196 Y152 Y197 Y203 Y195 Y215 Y204P Y189 Y205P Y206P Y207P Y193 Y142 Y149 Y145 Y110P Y151 Y109P Y150 Y136 Y137 Y138 Y139 Y140 Y141 Y143 Y144 Y146 Y147 Y148 Y102
M22520/5-01 M22520/5-02 M22520/5-03 M22520/5-04 M22520/5-05 M22520/5-06 M22520/5-07 M22520/5-08 M22520/5-09 M22520/5-10 M22520/5-11 M22520/5-13 M22520/5-15 M22520/5-17 M22520/5-19 M22520/5-21 M22520/5-23 M22520/5-25 M22520/5-27 M22520/5-29 M22520/5-31 M22520/5-33 M22520/5-35 M22520/5-37 M22520/5-39 M22520/5-41 M22520/5-43 M22520/5-45 M22520/5-47 M22520/5-49 M22520/5-51 M22520/5-53 M22520/5-55
5120-01-335-8575 5120-01-335-8244 5120-01-335-8245 5120-01-335-8246 5120-01-335-8247 5120-01-335-8248 5120-01-335-8249 5120-01-335-8250 5120-01-335-8251 5120-01-335-8252 5120-01-335-8253 5120-00-133-0585 5120-01-335-8255 5120-00-133-0597 5120-01-335-8257 5120-01-335-8258 5120-01-335-8259 5120-01-335-8260 5120-01-335-8261 5120-01-335-8262 5120-01-335-8263 5120-01-335-8264 5120-01-335-8265 5120-01-335-8266 5120-01-335-8267 5120-01-335-8268 5120-01-335-8269 5120-01-335-8270 5120-01-335-8271 5120-00-133-0644 5120-00-116-3040 5120-01-335-8294 5120-01-335-8295
Standard Crimp Tool Frame .091 .128 .138 .213 .128 .255 .128 .178 .160 .213 .255 .263 .118 .255 .475 .384 .429 .532 .324 .501 .343 .324 .314 .309 .290 .268 .231 .359 .401 .431 .454 .324 .090 .325 .090 .325 .094 .325 .375 .400 .400 .400 .400 .400 .375 .400 .400 .400 .400 .400 .400 .400 .400 .400 .400 .400 .400 .400 .400 .400 .400 .400 .400 .400 .105 .128 .151 .160 .178 .197 .218 .400 .400 .400 .400 .400 .400 .400 .100 .120 .100 .120 .213 .400 .068 .068 .068 .093 .093 .093 .068 .093 .068 .105 .118 .178 .270 .325 .270 .325
Y209P Y208P Y178 Y314P Y501 Y527 Y539 Y540 Y631 HX3 X115S X103 X123 X101 X125 X102 X140 X129 X136 X225 X118 X226 X149 X147 X144 X155 X156 X187 X515 X511 X525 X527 X528
M22520/5-57 M22520/5-59 M22520/5-61 M22520/5-63 M22520/5-100 M22520/5-101 M22520/5-102 M22520/5-103 M22520/5-105 M22520/10-01 M22520/10-02 M22520/10-03 M22520/10-04 M22520/10-05 M22520/10-06 M22520/10-07 M22520/10-08 M22520/10-09 M22520/10-10 M22520/10-11 M22520/10-13 M22520/10-15 M22520/10-17 M22520/10-19 M22520/10-21 M22520/10-23 M22520/10-25 M22520/10-27 M22520/10-100 M22520/10-101 M22520/10-102 M22520/10-103 M22520/10-104
5120-01-335-8296 5120-01-335-8297 5120-01-335-8298 5120-01-335-8299 5120-00-126-0860 5120-01-335-8301 5120-01-335-8302 5120-01-335-8303 5120-01-361-9554 5120-00-117-4830 5120-01-335-8304 5120-01-335-8305 5120-01-335-8277 5120-01-335-8278 5120-01-335-8279 5120-01-335-8280 5120-01-335-8281 5120-01-335-8282 5120-01-335-8283 5120-01-335-8284 5120-01-335-8285 5120-01-335-8286 5120-01-335-8287 5120-01-335-8288 5120-01-335-8289 5120-01-335-8290
.213 .255 .429 .263
.400 .400 .400 .400
.100 .100
.120 .120
.091
.090
Pre-Insulated Terminal Crimp 26-10 AWG Pre-Insulated Splice Crimp 26-20 AWG Splice Crimp 12-1 6 AWG Splice Crimp 16-26 AWG .218 .307
Minature Crimp Tool Frame .091 .255 .138 .128 .160 .213 .128 .118 .128 .105 .128 .151 .178 .197 .213 .218 .231 .090 .325 .090 .325 .400 .325 .093 .327 .375 .400 .400 .400 .400 .400 .400 .400 .400 .400 .178 .325 .118 .105 .270 .325 .068 .270
5120-01-335-8291 5120-00-116-3286 5120-00-116-2992 5120-01-335-8274 5120-00-124-3734 5120-01-335-8276
.255
Terminal/Splice Crimp 12-10 AWG Terminal/Splice Crimp 26-14 AWG Terminal/Splice Crimp 26-20 AWG Splice Crimp 16-12 AWG Splice Crimp 26-16 AWG
* Die part numbers ending in P indicate that the die set has an alignment guide pin.
PAGE 71
Battery Powered Hydraulic Open Frame Crimp Tools

GET THE PORTABILITY Of A HAND TOOL WITH THE STAMINA Of A POWER TOOL!
DMC is pleased to present our battery powered hydraulic tools to crimp copper and aluminum cable #26 to #8 AWG with DMC Y Dies (M22520/5-XX and others). These tools are equivalent to DMCs HX4 hand tool and use the same Y-dies. Working on todays electricalsystems calls for increased mobility and repeatable, consistent crimping force. To satisfy this need, DMC offers a battery powered hydraulic crimp tool designed to integrate your current tooling systems. The ergonomic tool body helps reduce workplace injuries and eases operator fatigue keeping costs low and production high. DMC battery powered tools have been engineered to work with our existing Y-die series and compliment our established crimp tools. And, as always, if we dont have a die to meet your needs, well engineer and manufacture it for you.
AdjuSTAblE dIES FOR INSulATEd TERMINAlS & SPlICES COlOR Yellow Blue Red Yellow Red/Blue SIZE 12-10 16-14 22-18 26-24 22-14 P/N Y670 Y671 Y672 Y678 Y1060
hXe4B
FEATURES Ergonomic design allows one-handed operation Die automatically opens when crimp is complete Indicating complete crimp pressure cycle has been achieved Head rotates 350 degrees Red LED to display the charge status of the battery CRIMP CAPACITIES #26 to #8 AWG (copper terminations) Max. Crimp Force: 1.5 Tons (13.3 kN) Avg. Crimp Time: 2 seconds Avg. Crimps per Charge: 200 Charge Time: 15 mins (Avg.) SPECIFICATIONS Length: 14.5" (368 mm) Width: 2.87" (72.9 mm) Depth: 4.5" (114.3 mm) Weight (with battery): 3.18 lb (1.4 kg) Sound Level: 75 db(A) at 1 meter Vibration: <8.2 ft/s2 (2.5 m/s2) Hydraulic Oil: Shell Tellus T-15 TOOL INCLUDES: Carrying Case, Gage, Die Removal Tool, Two 18v Batteries (p/n HDE-LI-B), One Battery Charger (p/n HDE-LI-120C). Dies must be ordered separately.
Adjustable Crimping Dies accept terminations which conform to AS7928, AS25036 (class 1 and 2) and other military or commercial specifications.
HXE4B
The HXE4B Battery Powered Hydraulic Open Frame Crimp Tool is a hand held, self-contained crimp tool. The crimp head, battery, and pump unit are contained in one ergonomic tool body and weighs about 4 pounds. It is equivalent to DMCs HX4 hand tool and uses the same Y-dies. (See page 71 & 77)
HXE4AB
This tool is available with an optional spring loaded push rod to hold the product in the crimping position (dies normally closed). (P/N HXE4AB)
PAGE 72
www.DMCTools.CoM
HXE4-R
The HXE4-R Remote Head Battery Powered Hydraulic Open Frame Crimp Tool is a portable, self-contained crimp tool. The lightweight crimp head is connected to the battery and pump unit by a hydraulic umbilical cable. This reduces the held weight to 2 pounds, about the same as the manual tool. The battery and pump unit can be worn by the operator on a tool belt, stored in a carrying case, or mounted to a bench top. It is equivalent to DMCs HX4 hand tool and uses the same Y-dies. (See page 71 & 77).
FEATURES Ergonomic design allows one-handed operation Die automatically opens when crimp is complete Die can be pre-closed under spring pressure (thumb actuated release standard) Connection point for tool balancing systems CRIMP CAPACITIES #26 to #8 AWG (copper terminations) Max Crimp Force: 3500lb/15.6kN Max Oil Pressure: 4000psi/276 bar Max Crimp Time: Approx. 3.5 seconds Crimps per Charge: Approx. 250 CRIMP TOOl Length: 9.5/241mm Width: 2.5/63.5mm Depth: 2.5/63.5mm Weight: 1.64lb/.74kg Hose Length: 4.5ft (permanently attached) POwER uNIT wITh bATTERy INSTAllEd Length: 9.8/248mm Width: 3.1/80mm Depth: 5.6/142mm Weight: 4.3lb/2.0kg Sound Level: 72dBA Hydraulic Oil: 1.7oz/48g Shell Tellus T-15 Charging Voltage: 10.8 VDC Lithium Ion Type Battery Charging Time: Approx. 40 minutes (Avg.)
TOOL INCLUDES: Case, Gage, Die Removal Tool, Two Batteries (p/n HD-BATTERY-R), One Battery Charger (p/n HD-110CHARGER-R). Tool Belt, AC Adapter, and Bench Mount sold separately. Dies must be ordered separately.
hXe4-R
The battery and pump unit can be worn on a tool belt... (p/n 2063863-1)
used with an AC adapter... (p/n HD-110AC)
or mounted to a bench top. (p/n BM-7)
www.DMCTools.CoM
PAGE 73
Pneumatic Open Frame Tool

HX23 BENCH CRIMP PRODUCTION PRESS
CoMPATiBiliTy wiTH ExisTing CriMP DiEs The HX23 accommodates all M22520/5-XX military and Daniels Y series crimp dies. This affords total utilization of existing dies and total interchangeability with M22520/5-01 (Daniels HX4) hand tool frames. Full CyClE ConTrol Full die closure is assured on every crimp. The internal cycle control network will not allow the tool to open until complete closure is attained. A simple procedure is available to open the tool in cases where a complete cycle cannot be effected. A secure method is provided to prevent unauthorized personnel from defeating the cycle control system. HAnDs FrEE oPErATion There are no awkward levers or mechanisms used to open or close the crimp dies. These operations waste time and distract the operators attention. When the tool is in the normal condition, the crimp dies are fully open where contact assemblies can easily be inserted. A touch of the foot valve releases the dies to a gripping position (spring pressure only). When the operator is satisfied that the contact assembly is positioned correctly and hands are in a safe position, another actuation of the same foot valve completes the crimp and quickly returns the die to the open position for removal of the crimped assembly and loading of the next parts. MounTing The HX23 is supplied with a stable bench mount with can remain unattached for portability. Or, can be mounted to a workstation by installing fasteners through the holes provided. The HX23 Production Crimp Press can be used in horizontal or vertical positions.
SAFETy FEATURES:
2 Step Crimping Process Emergency Stop Switch
Bench MoUnt and foot PRess incLUded
oPErATor sAFETy FEATurEs The HX23 is equipped with a transparent guard which affords the protection, but does not restrict vision. The Hands Free Operation system allows the operator to position the contact assembly while the die is under spring pressure only. The operator is then free to let the tool hold the contact assembly during the crimp cycle while the operators hands and fingers are a safe distance from the crimping die. The HX23 foot valve assembly is constructed with a protective shroud to prevent accidental actuation. For operation the operator places their foot under the shroud to depress the pedal.
Full PnEuMATiC oPErATion Standard clean, dry shop air at the recommended pressure is all that is required to operate the HX23 tool. There are no electrical or hydraulic requirements.
hX23 SPECIFICATIONS COMPONENTS TOOL FRAME (LESS BENCH MOUNT) FOOT VALVE SIZE 4 x 6 x 16 (in) 11.4 x 15.2 x 40.6 (cm) 4 x 5 x 13 (in) 10.2 x 12.7 x 34.3 (cm) HOSE ASSM. (BETWEEN FOOT PRESS AND CRIMP TOOL) 9 Feet 2.7 Meters wEIGhT 11 LBS 5.2 KG 6 LBS 2.7 KG N/A
AIR REQUIREMENTS 80-95 PSI (5.4-6.4 BAR)
PAGE 74
www.DMCTools.CoM
X-Die Pneumatic Tool Bench Press Style Crimp Tool

PHX3 PNEUMATIC TOOL
CoMPATiBiliTy wiTH ExisTing CriMP DiEs The PHX3 accommodates all M22520/10-XX military and Daniels X series crimp dies. This affords total utilization of existing dies and total interchangeability with M22520/10-01 (Daniels HX3) hand tool frames. Full CyClE ConTrol Full die closure is assured on every crimp. The internal cycle control network will not allow the tool to open until complete closure is attained. oPErATor sAFETy FEATurEs The PHX3 is equipped with a crimp cavity guard to remind users to keep fingers clear of the crimp dies. Full PnEuMATiC oPErATion Standard clean, dry shop air at the recommended pressure (100 - 120 psi) is all that is required to operate the PHX3 tool. There are no electrical or hydraulic requirements. Safety Guard not shown.
A Bench Mount is Available (P/N BM-2A)

BENCH PRESS STYLE OPEN fRAME CRIMP TOOLS UDT4 & UDT3
The UDT4 & UDT3 tools have the die frame opening on the opposite side of the tool frame from the HX4 & HX3 so the tool can be used as a portable bench top press or as a hand tool. The tool frames are equipped with the same positive ratchet assembly and accept the same Y and X series dies. When used as a bench top press, the operator gains a greater mechanical advantage, thereby reducing operator fatigue.
www.DMCTools.CoM
PAGE 75
Electric/Hydraulic Open Frame Crimp Tool

A TOTALLY SELfCONTAINED PORTABLE CRIMP SYSTEM
The EHCY is a fast cycling bench-top crimp tool designed to be lightweight and rugged. The versatile features of the EHCY make this a good choice where production and quality cannot be compromised. This unit is small in overall size (10.0" H x 7.1" W x 19.1" L) and weighs approximately 27 pounds, but has ample die force power to do most jobs. The crimp cycle time is only two seconds. CoMPATiBiliTy wiTH ExisTing CriMP DiEs The EHCY accommodates all M22520/5-XX military and Daniels Y series crimp dies. This affords total utilization of existing dies and total interchangeability with M22520/5-01 (Daniels HX4) hand tool frames. Full CyClE ConTrol Full crimp pressure is assured on every crimp. The internal cycle control network will not allow the tool to open until complete pressure is attained. The cycle is disabled when the Emergency Stop button is actuated. oPErATor sAFETy FEATurEs The EHCY is equipped with a crimp cavity guard to remind users to keep fingers clear of the crimp dies. An Emergency Stop button is located on top of the tool. Depressing this button releases the hydraulic pressure and retracts the crimp dies to re-open. A Foot Pedal is Available (P/N EHCFP) When plugged to the crimp press, it disables the front panel actuator.
uNINSulATEd TERMINAlS MS20659 AwG SIZE #8-RED #8-RED #6-BLUE #6-BLUE dIE P/N Y844HN Y845HN Y846HN Y847HN CRIMP hEIGhT 0.135" 0.135" 0.176" 0.176" INdENT SGL DBL SGL DBL GAGE G744 G744 G745 G745
INSulATEd TERMINAlS MS25036 AwG SIZE #8-RED #6-BLUE dIE P/N Y673H Y674H CRIMP hEIGhT 0.17" 0.202" GAGE G682 G683
AdjuSTAblE dIES FOR INSulATEd TERMINAlS & SPlICES COlOR Yellow Blue Red SIZE 12-10 16-14 22-18 26-24 22-14 P/N Y670 Y671 Y672 Y678 Y1060
hEX dIES AwG SIZE 0.202" Hex Crimp dIE P/N Y870H CRIMP hEIGhT 0.202" GAGE G724
Yellow Red/Blue
Standard model (P/N EHCY) operates on 110 VAC power (power cord included). Models available for other power and power cord requirements. Inquire with DMC for details.
PAGE 76
www.DMCTools.CoM
HeaderA Right of Capabilities Y-Dies For Full Range

Subheadline
DMC constantly adds new crimp die designs that are comparable to connector and terminal supplier dies or tools. A few of the popular Y die applications are featured in the following chart. For more options, consult factory. Typical Die configuraTions
MFR. TOOL DMC MFR. TOOL DMC MFR. TOOL DMC MFR. TOOL MS25312-1 MS25312-2 MS25312-3 MS25312-4 MS27143 MS27144 MS27148 RADIALL R282 235 901 RADIALL R282230 RAYCHEM AD1377 T&B WT232 T&B RA18-188 T&B WT157N T&B WT200 T&B WT200-06-08 T&B WT200-06-11 T&B WT201-03-10 T&B WT202-06-08 T&B WT202-06-08 T&B WT203 T&B WT209, 409 T&B WT210, 410 T&B WT215 T&B WT216 T&B WT218 T&B WT226 T&B WT227 T&B WT229 T&B WT230 T&B WT231 T&B WT233 T&B WT234 T&B WT235 T&B WT238 T&B WT311 T&B WT400 T&B WT400 T&B WT400-02-08 T&B WT401 T&B WT401, 406, 411 T&B WT402 T&B WT406 T&B WT406M T&B WT411 T&B WT414 T&B WT419 TROMPETER CD5-10 TROMPETER CD5-11 TROMPETER CD5-8 TROMPETER CD5-12 TROMPETER CD5-13 TROMPETER CD5-4 TROMPETER CD5-7 TROMPETER CD5-9 TYCO 59250 TYCO 59275 TYCO AD1377 WALTER KIDDE M616229 DMC Y510 Y509 Y508 Y507 Y627 Y627 Y627 Y915 Y342 Y516 Y173 Y580 Y689 Y119 Y360 Y443 Y410 Y409 Y411 Y198 Y211 Y212 Y139 Y138 Y145 Y169 Y170 Y178P Y179 Y180 Y242 Y293 Y246 Y245 Y243 Y203 Y215 Y219 Y201 Y292 Y214 Y216 Y321 Y190 Y191 Y192 Y776 Y777 Y778 Y789F Y803 Y631 Y775 Y687 Y1060 Y1061 Y516 Y412 AMP 220009-1-B Y827 AMP 220015-1 Y587 AMP 220045-2 Y588 AMP 220066-1 Y586 AMP 227-1400 Y800P AMP 277-980-3 Y773P AMP 45158-2 Y717 AMP 45238-2 Y721 AMP 45239-2 Y720 AMP 45240-2 Y719 AMP 45241-2 Y718 AMP 46673 Y751 AMP 46988 Y752 AMP 49935 Y788 AMP 501295-1 Y923 AMP 52561 Y934A AMP 58237-1 Y902 AMP 58237-2 Y897 AMP 58238-2-A Y896 AMP 58249-1 Y692 AMP 583424 Y906 AMP 583424-1,-2 Y904 AMP 583424-5 Y903 AMP 583424-6 Y905 AMP 58423-1 Y810P AMP 58423-2 Y811P AMP 59215 Y619 AMP 59250 Y1060 AMP 59255 Y753 AMP 59459 Y745 AMP 59461 Y794 AMP 59493-1 Y843 AMP 59508 Y748 AMP 59962-1 Y1997 AMP 69149-1 Y732 AMP 69223-1 Y733 AMP 69224-1 Y734 AMP 69266-1 Y735 AMP 69339 Y589 AMP 69352 Y749 AMP 69355 Y750 AMP 69363 Y590 AMP 69365-3 Y950 AMP 69408 Y736 AMP 69422 Y737 AMP 69423 Y738 AMP 69424 Y739 AMP 69425 Y740 AMP 69429 Y741 AMP 69471 Y742 AMP 69477-4 Y938 AMP 69493 Y743 AMP 69493-1 Y744 AMP 69646 Y746 AMP 69646 Y537 AMP 69726 Y1998 AMP 69811 Y747 AMP 85-35181-SK11 Y692 AMP 9036402A Y929 AMPHENOL 227-1221-6001 Y951 AMPHENOL 227-1228 Y240S AMPHENOL 227-1242 Y323S AMPHENOL 227-125 Y129 AMPHENOL 227-1350 Y324S AMPHENOL 227-1351-1 Y325 AMPHENOL 227-1351-2 Y344 AMPHENOL 227-1351-3 Y326 AMPHENOL 227-1351-4 Y346 AMPHENOL 227-1351-5 Y347 AMPHENOL 227-1351-6 Y348 AMPHENOL 227-1354 Y355S AMPHENOL 227-1355 Y356S AMPHENOL 227-1358 Y357 AMPHENOL 227-1392-03 Y488S AMPHENOL 227-1395 Y654 AMPHENOL 227-1402 Y677 AMPHENOL 227-1403 Y493 AMPHENOL 227-1409 Y688PS AMPHENOL 227-1414 Y780 AMPHENOL 227-200 Y133 AMPHENOL 227-350 Y132 AMPHENOL 227-375 Y131 AMPHENOL 227-400 Y130P AMPHENOL 227-425 Y134 AMPHENOL 227-600 Y225 AMPHENOL 227-911 Y442 AMPHENOL 227-911 Y623 AMPHENOL 227-980-1 Y685 AMPHENOL 227-980-2 Y686 AMPHENOL 227-980-5 Y787P AMPHENOL 294-1832 Y200P AMPHENOL 294-532 Y200P AMPHENOL 294GB-5031 Y731 AMPHENOL 48-326 Y477 AMPHENOL 611X1151 Y336 AMPHENOL 611X1275-1 Y564 AMPHENOL 790-5185 Y255S AMPHENOL 790-5284 Y257 AMPHENOL 790-5285 Y254 AMPHENOL 790-5431 Y250 ASTRO. 613876 Y328 ASTRO. 615550 Y330 BENDIX 21-33145-1 Y690 BURNDY MR8PV-2 Y530 BURNDY MR8-PVS Y524 BURNDY N14HET-25 Y881 BURNDY N14RT-10 Y818 BURNDY N22RVMT-10 Y512 BURNDY N22RVMT-15 Y817 BURNDY YAV9C-L36 Y948 CANNON 249-1400-000 Y249P CANNON 304-0445-000 Y894 CANNON 317-1795-000 Y694 CANNON 317-2071-000 Y824 CANNON 317-7178-000 Y830 CANNON 990-001-391/392 Y358 CANNON 995-0001-761 Y704 CANNON 995-0002-113 Y702 CANNON 995-0002-143 Y708 CANNON 995-0002-228 Y793 CANNON APK 15 & 25 Y831 CANNON BUCH. 612992 Y331 CANNON CCT-406M Y321 CANNON CCT-C1 Y316 CANNON CCT-C10 Y320 CANNON CCT-C2 Y555 CANNON CCT-C3 Y317 CANNON CCT-C5 Y318 CANNON CCT-C6 Y319 CANNON CCT-C7A Y557 CANNON CCT-C8 Y558 CANNON CCT-C9 Y559 CANNON CCT-CKM1 Y560 CANNON CCT-CX2 Y556 CANNON CCT-DM Y322 DEUTSCH 20055 Y380 KINGS 683-514/0-3 Y397 KINGS 683-51559 Y467 KINGS KTH1002 Y464 KINGS KTH1061 Y575 KINGS KTH1077 Y828P KINGS KTH1078 Y609 KINGS KTH1079 Y630P KINGS KTH2002 Y269 KINGS KTH2012 Y277 KINGS KTH2021 Y339 KINGS KTH2024 Y423 KINGS KTH2042 Y209P KINGS KTH2061 Y572 KINGS KTH2062 K575 KINGS KTH2062 Y762P KINGS KTH2063 Y617 KINGS KTH2064 Y574 KINGS KTH2067 Y573 KINGS KTH2067 Y760P KINGS KTH2081 Y613 KINGS KTH2082 Y600 KINGS KTH2101 Y633 KINGS KTH2103 Y680 KINGS KTH2105 Y634 KINGS KTH2127 Y635 KINGS KTH2128 Y636 KINGS KTH2140 Y837P KINGS KTH2162 Y679 KINGS KTH2168 Y932 KINGS KTH2175 Y940 KINGS KTH2177 Y825 KINGS KTH2180 Y829P KINGS KTH2207 Y888 KINGS KTH2211 Y889 KINGS KTH2212 Y890 KINGS KTH2213 Y891 KINGS KTH2213 Y910 KINGS KTH2214 Y892 KINGS KTH2216 Y893 KINGS KTH2229 Y911 M22520/5-104 Y692 MAC PANEL 452303 Y430-MP MOLEX 8657-5001/2 Y922 MOLEX 86760-5003 Y926
Others Available. Consult DMC.
www.DMCTools.CoM
PAGE 77
Coaxial/Shieded Header Left Contact

Subheadline Tool Selection
SHIELDED CONTACTS AND CONNECTOR SERIES BIN CODE 120 121 M39029/6pin conTacT Mil-c-81511 series 1 anD 2 122 123 124 125 M39029/7pin conTacT Mil-DTl-26482 series 2 Mil-DTl-81703 series 3 M39029/8sKT conTacT Mil-DTl-26482 series 2 Mil-DTl-81703 series 3 131 152 153 M39029/13sKT conTacT Mil-c-81511 series 1 154 155 156 157 158 159 M39029/14sKT conTacT Mil-c-81511 series 2 160 161 162 163 181 M39029/19pin conTacT Mil-c-81511 series 3 anD 4 183 12 182 12 16 12 12 12 12 12 16 12 12 12 12 12 16 12 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 184 M39029/20sKT conTacT Mil-c-81511 series 3 186 12 185 16 12 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 187 M39029/21sKT conTacT Mil-c-81511 series 4 189 12 188 16 12 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 K269-1 K262-1 K261-1 K261-1 K261-1 K261-1 K261-1 K262-1 K261-1 K261-1 K261-1 K261-1 K261-1 K373-1 K373-1 K372-1 K372-1 K372-1 K372-1 K372-1 K372-1 K373-1 K373-1 K372-1 K372-1 K372-1 K372-1 K372-1 K372-1 K373-1 K373-1 K372-1 K372-1 K372-1 K372-1 K372-1 K372-1 130 12 AFM8 K269-1 129 12 AFM8 K269-1 128 12 AFM8 K269-1 127 12 AFM8 K269-1 126 CONTACT CAVITY SIZE 16 12 12 12 12 12 12
Guide
INNER CONTACT
SHIELD CRIMP SLEEVE CRIMPING TOOL HX4 HX4 HX4 HX4 HX3 HX4 HX3 HX4 HX4 HX4 HX4 HX4 HX4 HX4 HX4 HX4 HX4 HX4 HX3 HX4 HX3 HX4 HX4 HX4 HX4 HX4 HX3 HX4 HX3 HX4 MH802 MH802 MH804 MH804 MH804 MH804 MH804 MH804 MH802 MH802 MH804 MH804 MH804 MH804 MH804 MH804 MH802 MH802 MH804 MH804 MH804 MH804 MH804 MH804 POSITIONER OR DIE Y200 Y152 Y152 Y152 X123 Y152 X123 Y152 Y203 Y203 Y203 Y203 Y203 Y203 Y200 Y152 Y152 Y152 X123 Y152 X123 Y152 Y200 Y152 Y152 Y152 X123 Y152 X123 Y152 D16/1-1M D16/1-1M D12/1-1M D12/1-1M D12/1-1M D12/1-1M D12/1-1M D12/1-1M D16/2-1M D16/2-1M D12/2-1M D12/2-1M D12/2-1M D12/2-1M D12/2-1M D12/2-1M D16/2-1M D16/2-1M D12/1-1M D12/1-1M D12/1-1M D12/1-1M D12/1-1M D12/1-1M
OUTER CONTACT CRIMPING TOOL HX4 HX4 HX3 HX4 HX3 HX4 HX3 HX4 HX3 HX4 HX3 POSITIONER OR DIE Y200 Y152 X123 Y152 X123 Y152 X123 Y152 X123 Y152 X123 INSTALLING TOOL DAK126-16A DAK126-12A DAK126-12A DAK126-12A DAK126-12A DAK126-12A DAK83-12B DAK83-12B DAK83-12B DAK83-12B DAK83-12B DAK83-12B HX4 HX4 HX3 HX4 HX3 HX4 HX3 HX4 HX3 HX4 HX3 HX4 HX4 HX3 HX4 HX3 HX4 HX3 HX4 HX3 HX4 HX3 MH801 MH801 MH803 MH803 MH803 MH803 MH803 MH803 MH801 MH801 MH803 MH803 MH803 MH803 MH803 MH803 MH801 MH801 MH803 MH803 MH803 MH803 MH803 MH803 Y200 Y152 X123 Y152 X123 Y152 X123 Y152 X123 Y152 X123 Y200 Y152 X123 Y152 X123 Y152 X123 Y152 X123 Y152 X123 D16P-1M D16P-1M D12P-1M D12P-1M D12P-1M D12P-1M D12P-1M D12P-1M D16LS-1M D16LS-1M D12LS-1M D12LS-1M D12LS-1M D12LS-1M D12LS-1M D12LS-1M D16S-1M D16S-1M D12S-1M D12S-1M D12S-1M D12S-1M D12S-1M D12S-1M MS3160-12 MS3160-12 MS3160-16 MS3160-12 MS3160-16 MS3160-12 MS3160-12 MS3160-12 MS3160-16 MS3160-12 MS3160-16 MS3160-12 MS3160-12 MS3160-12 DAK126-16A DAK126-12A DAK126-12A DAK126-12A DAK126-12A DAK126-12A DAK126-16A DAK126-12A DAK126-12A DAK126-12A DAK126-12A DAK126-12A MS3160-16 MS3160-12 REMOVAL TOOL DRK125-16A DRK125-12A DRK125-12A DRK125-12A DRK125-12A DRK125-12A DRK83-12B DRK83-12B DRK83-12B DRK83-12B DRK83-12B DRK83-12B DRK129-16A DRK129-12A DRK129-12A DRK129-12A DRK129-12A DRK129-12A DRK129-16A DRK129-12A DRK129-12A DRK129-12A DRK129-12A DRK129-12A MS3160-16 MS3160-12
CRIMPING TOOL AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 AFM8
POSITIONER K262-1 K261-1 K261-1 K261-1 K261-1 K261-1 K269-1
PAGE 78
www.DMCTools.CoM
Coaxial/Shieded Contact Tool Selection Guide

sHielDeD conTacTs anD connecTor series M39029/25pin conTacT Mil-DTl-26482 series 1 M39029/26sKT conTacT Mil-DTl-26482 series 1 inner conTacT Bin coDe conTacT caViTy siZe criMping Tool AFM8 AFM8 AFM8 AFM8 AFM8 AFM8 sHielD criMp sleeVe criMping Tool HX4 posiTioner or Die (caViTy) Y189 DAK12B HX4 HX4 Y189 Y189 DAK12B HX4 Y189 DRK12B DRK12B ouTer conTacT criMping Tool posiTioner or Die (caViTy) insTalling Tool reMoVal Tool
posiTioner K496 K496 K496 K496 K496 K496
204 205 206 207 208 209 210 402
12 12 12 12 12 12
M39029/27sKT conTacT Mil-prf-38999 series 2
403 404 405 406 407 408 211 409 12 AFM8 K323 GS200-1 G2P330 DAK95-12B DRK95-12B
M39029/28pin conTacT Mil-prf-38999 series 1, 2, 3 & 4
410 411 412 413 414 415 12 AFM8 K323 GS200-1 G2P330 DAK95-12B DRK95-12B
M39029/50pin conTacT Mil-DTl-83733 M39029/51sKT conTacT Mil-DTl-83733 M39029/54pin conTacT Mil-DTl-26500
340
12
AFM8
K404
HX4 HX3 HX4 HX3 HX4 HX3 HX4 HX3 HX4 HX3 HX4 HX3 HX4
Y215 X101 Y215 X101 Y215 X101 Y215 X105 Y215 X101 X215 X125 Y197 H102 X197 X102
DAK83-12B
DRK83-12B
341
12
AFM8
K404
DAK83-12B
DRK83-12B
342
12
AFM8
K74S
DAK12B
DRK12B
343
AFM8
K75S-1
DAK55-8B
DRK56-8B
M39029/55sKT conTacT Mil-DTl-26500 M39029/59sKT conTacT Mil-prf-38999 series 1, 3 & 4 M39029/60pin conTacT Mil-prf-38999 series 1, 3 & 4
344
12
AFM8
K74S
DAK12B
DRK12B
345
AFM8
K75S-1
DAK55-8B
DRK56-8B
366
AFM8
K406
HX3 HX4
BY HAND
DRK95-8B
367 416 417 418
AFM8
KY06
HX3
BY HAND
DRK95-8B
M39029/75sKT conTacT Mil-prf-38999 series 1, 3 & 4
419 420 421 422 423 424
12
AFM8
K323
GS200-1
G2P330
DAK95-12B
DRK95-12B
M39029/76pin conTacT Mil-prf-38999 series 1, 2, 3 & 4
425 426 427 428
16
AFM8
K532-1
GS100-1
GP295
DAK95-16B
DRK95-16B
M39029/77sKT conTacT Mil-prf-38999 series 1, 3 & 4 M39029/78sKT conTacT Mil-prf-38999 series 2 Mil-DTl-24308
429 430 431 432 433 434 435
16
AFM8
K532-1
GS100-1
GP295
DAK95-16B
DRK95-16B
16
AFM8
K532-1
GS100-1
GP295
DAK95-16B
DRK95-16B
www.DMCTools.CoM
PAGE 79
R.F. Connectors Tool Selection Guide MIL-PRF-39012/16

series BNC
connecTor Type PLUG PIN CoNtACt connecTor MiliTary parT no. M39012/16-0501 M39012/16-0502 M39012/16-0503 M39012/16-0504
conTacT guiDe conTacT MiliTary parT no.* pin or sKT colorBanD
applicaBle aBle rg-/u
criMp Tool
posiTioner or Die
I.C. M39012/16-12 o.F. M39012/16-50 I.C. M39012/16-11 o.F. M39012/16-50 I.C. M39012/16-10 o.F. M39012/16-51 I.C. M39012/16-10 o.F. M39012/16-52
P P P P
oRA BLU RED RED
YEL YEL YEL YEL
122 180 142 400 58
AF8 HX4 AF8 HX4 AF8 HX4 AF8 HX4 HX3 Y197 HX3 Y197 HX3 Y197 HX3 Y197
tH270 X102 tH270 X102 tH270 X102 tH270 X102
MIL-PRF-39012/17
series BNC
connecTor Type
connecTor MiliTary parT no. M39012/17-0501
PLUG SoCKEt CoNtACt
M39012/17-0502 M39012/17-0503 M39012/17-0504
conTacT guiDe conTacT MiliTary parT no.* I.C. M39012/17-12 O.F. M39012/17-50 I.C. M39012/17-11 O.F. M39012/17-50 I.C. M39012/17-10 O.F. M39012/17-51 I.C. M39012/17-10 O.F. M39012/17-52 pin or sKT S S S S colorBanD
applicaBle aBle rg-/u 122 180 142 400 58
criMp Tool
posiTioner or Die
ORA BLU RED RED
GRE GRE GRE GRE
tH270 X102 tH270 X102 tH270 X102 tH270 X102
* I.C. - Inner Contact, O.F. - Outer Ferrule PAGE 80


series BNC
connecTor Type connecTor MiliTary parT no. M39012/18-0501 RECEPtICLE, FLANGE MoUNtED M39012/18-0502 M39012/18-0503 M39012/18-0504
applicaBle aBle rg-/u 122 180
criMp Tool
posiTioner or Die
ORA BLU RED RED
GRE GRE GRE GRE
AF8 HX4 AF8 HX4 HX3 AF8 HX4 AF8 HX4 HX3 Y197 HX3 Y197 Y197 HX3 Y197
tH270 X102 tH270 X102 tH270 X102 tH270 X102
142 400 58
MIL-PRF-39012/19
series BNC
connecTor Type
connecTor MiliTary parT no. M39012/19-0501
JAM NUt MoUNt
M39012/19-0502 M39012/19-0503 M39012/19-0504
applicaBle aBle rg-/u 122
criMp Tool
posiTioner or Die
ORA BLU RED RED
BLU BLU BLU BLU
AF8 HX4 HX3 AF8 HX4 HX3 AF8 HX4 AF8 HX4 HX3 Y197 HX3 Y197 Y197 Y197
tH270 X102 tH270 X102 tH270 X102 tH270 X102
180 142 400 58
www.DMCTools.CoM

series BNC
connecTor Type PLUG RIGHt ANGLE connecTor MiliTary parT no.
M39012/20-0501 M39012/20-0502 M39012/20-0503 M39012/20-0504 conTacT guiDe conTacT MiliTary parT no.* I.C. M39012/20-12 O.F. M39012/20-50 I.C. M39012/20-11 O.F. M39012/20-50 I.C. M39012/20-10 O.F. M39012/20-51 I.C. M39012/20-10 O.F. M39012/20-52 pin or sKT P P P P colorBanD
criMp Tool
posiTioner or Die
ORA BLU RED RED
VIO VIO VIO VIO
tH270 X102 tH270 X102 tH270 X102 tH270 X102
180 142 400 58
MIL-PRF-39012/1
series N
connecTor Type
connecTor MiliTary parT no.

M39012/01-0501
PLUG
M39012/01-0502
M39012/01-0503
criMp Tool
posiTioner or Die
I.C. M39012/1-10 o.F. M39012/1-50 I.C. M39012/1-10 o.F. M39012/1-51 I.C. M39012/1-11 o.F. M39012/1-52
P P P
RED RED BLU
BLA BLA BLA
214 225 393 213 142 400 HX4 HX4
AF8 Y176 AF8 HX4 AF8 HX3 Y142 Y176
tH285
tH285 tH285 X144
* I.C. - Inner Contact, O.F. - Outer Ferrule
PAGE 82
www.DMCTools.CoM

series N
connecTor Type connecTor MiliTary parT no.
M39012/02-0501 M39012/02-0511 PLUG AND RECEPTACLE FLANGE MOUNTED M39012/02-0502 M39012/02-0512 M39012/02-0503
M39012/02-0513
criMp Tool
posiTioner or Die
S S S
RED RED BLU
BRo BRo BRo
214 225 393 213 142 400 HX4 HX4
AF8 HX3 AF8 HX4 AF8 HX3 Y142 Y178 Y178
tH285
tH285 tH285 X144
MIL-PRF-39012/3
series N
connecTor Type

M39012/03-0501
JAM NUT MOUNTED
M39012/03-0502
M39012/03-0503
criMp Tool
posiTioner or Die
S S S
RED RED BLU
RED RED RED
214 225 393 213 HX4 142 400 HX4 HX4
AF8 Y178 AF8 Y178 AF8 HX3 Y142
tH286
tH286 tH286 X144

PAGE 83

series N
M39012/05-0501 PLUG RIGHT ANGLE M39012/05-0502
M39012/05-0503
criMp Tool
posiTioner or Die
P P P
RED RED BLU
oRA oRA oRA
214 225 393 213 142 400 HX4 HX4
AF8 Y178 AF8 HX4 AF8 HX3 Y142 Y178
tH285
tH285 tH285 X144
MIL-PRF-39012/26
series TNC
M39012/26-0501 PLUG PIN CONTACT M39012/26-0502 M39012/26-0503 M39012/26-0504
conTacT guiDe conTacT MiliTary parT no.* I.C. M39012/20-12 O.F. M39012/26-50 I.C. M39012/26-11 O.F. M39012/26-50 I.C. M39012/26-10 O.F. M39012/26-51 I.C. M39012/26-10 O.F. M39012/26-52 pin or sKT P P P P colorBanD
criMp Tool
posiTioner or Die
CRA BLU RED RED
YEL YEL YEL YEL
122
tH270 X102 tH270 X102 tH270 X102 tH270 X102
180 142 400 58


series TNC
M39012/27-0501 PLUG SOCKET CONTACT M39012/27-0502 M39012/27-0503 M39012/27-0504
criMp Tool
posiTioner or Die
ORA BLU RED RED
GRE GRE GRE GRE
122
tH270 X102 tH270 X102 tH270 X102 tH270 X102
180 142 400 58
MIL-PRF-39012/28
series TNC
M39012/28-0501 JAM NUT MOUNT M39012/28-0502 M39012/28-0503 M39012/28-0504
criMp Tool
posiTioner or Die
ORA BLU RED RED
BLU BLU BLU BLU
122
tH270 X102 tH270 X102 tH270 X102 tH270 X102
180 142 400 58

PAGE 85

series TNC
M39012/29-0501 RECEPTACLE FLANGE MOUNTING M39012/29-0502 M39012/29-0503 M39012/29-0504
criMp Tool
posiTioner or Die
ORA BLU RED RED
GRE GRE GRE GRE
122
tH270 X102 tH270 X102 tH270 X102 tH270 X102
180 142 400 58
MIL-PRF-39012/30
series TNC
M39012/30-0501 PLUG RIGHT ANGLE M39012/30-0502 M39012/30-0503 M39012/30-0504
conTacT guiDe conTacT MiliTary parT no.* I.C. M39012/30-12 O.F. M39012/30-50 I.C. M39012/30-11 O.F. M39012/30-50 I.C. M39012/30-10 O.F. M39012/30-51 I.C. M39012/30-10 O.F. M39012/30-52 pin or sKT P P P P colorBanD
criMp Tool
posiTioner or Die
ORA BLU RED RED
VIO VIO VIO VIO
tH270 X102 tH270 X102 tH270 X102 tH270 X102
180
142 400 58


series sC
connecTor Type
PLUG PIN CONTACT

M39012/35-0501 M39012/35-0502 M39012/35-0503
criMp Tool
posiTioner or Die
P P P
RED RED BLU
GRA GRA GRA
214 225 393 213 HX4 142 400 HX4 HX4
AF8 Y178 AF8 Y178 AF8 HX3 Y142
tH286
tH286 tH286 X144
MIL-PRF-39012/36
series sC
connecTor Type
PLUG SOCKET CONTACT

M39012/36-0501 M39012/36-0502 M39012/36-0503
criMp Tool
posiTioner or Die
S S S
RED RED BLU
WHI WHI WHI
214 225 393 213 142 400 HX4 HX4
AF8 Y178 AF8 HX4 AF8 HX3 Y142 Y178
tH286
tH286 tH286 X144
www.DMCTools.CoM
PAGE 87

series sC
connecTor Type
RECEPTACLE FLANGE MOUNTED

M39012/38-0501 M39012/38-0502 M39012/38-0503
criMp Tool
posiTioner or Die
S S S
RED RED BLU
WHI WHI WHI
214 225 393 213 142 400 HX4 HX4
AF8 Y178 AF8 HX4 AF8 HX3 Y142 Y178
tH286
tH286 tH286 X144
MIL-PRF-39012/39
series sC
M39012/39-0501 PLUG RIGHT ANGLE M39012/39-0502 M39012/39-0503
criMp Tool
posiTioner or Die
S S S
RED RED BLU
oRA oRA oRA
214 225 393 213 HX4 142 400 HX4 HX4
AF8 Y178 AF8 Y178 AF8 HX3 Y142
tH285
tH285 tH285 X144
PAGE 88
www.DMCTools.CoM

series sC
M39012/40-0501 JAM NUT MOUNT M39012/40-0502 M30912/40-0503
criMp Tool
posiTioner or Die
S S S
RED RED BLU
GoL GoL GoL
214 225 393 213 HX4 142 400 HX4 HX4
AF8 Y178 AF8 Y178 AF8 HX3 Y142
tH286
tH286 tH286 X144
MIL-PRF-39012/55
series sMA
connecTor Type
PLUG PIN CONTACT

M39012/55-3502
M39012/55-4502
conTacT guiDe conTacT MiliTary parT no.* I.C. M39012/55-10 O.F. M39012/55-50 I.C. M39012/55-10 O.F. M39012/55-50 pin or sKT P P colorBanD
criMp Tool
posiTioner or Die
RED RED
SIL SIL
AF8 HX4 AF8 HX4 HX3 Y142 HX3 Y142
tP485 X144 tP485 X144
www.DMCTools.CoM
PAGE 89

series sMA
connecTor Type
PLUG RIGHT ANGLE

M39012/56-3502
M39012/56-4502
conTacT guiDe conTacT MiliTary parT no.* I.C. M39012/56-10 O.F. M39012/56-50 I.C. M39012/56-10 O.F. M39012/56-50 pin or sKT P P colorBanD
criMp Tool
posiTioner or Die
RED RED
MAR MAR
tP485 X144 tP485 X144
MIL-PRF-39012/57
series sMA
connecTor Type
PLUG SOCKET CONTACT

M39012/57-3502 M39012/57-4502
conTacT guiDe conTacT MiliTary parT no.* I.C. M39012/57-10 O.F. M39012/57-50 I.C. M39012/57-50 O.F. M39012/57-50 pin or sKT S S colorBanD
criMp Tool
posiTioner or Die
RED RED
MAR MAR
tP485 X144 tP485 X144


series sMA
connecTor Type
RECEPTACLE FLANGE MOUNTED

M39012/58-3502
M39012/58-4502
criMp Tool
posiTioner or Die
RED RED
MAR MAR
tP485 X144 tP485 X144
MIL-PRF-39012/59
series sMA
connecTor Type
JAM NUT MOUNTED

M39012/59-3502
M39012/59-4502
criMp Tool
posiTioner or Die
RED RED
MAR MAR
tP485 X144 tP485 X144

PAGE 91
Mid-Current Range Adjustable Indent Crimp Tools
For power supply and power management applications, DMC offers our Industrial Mid-Current Range Adjustable Crimp Tools which have virtually limitless applications within the specified wire range of 6 through 18 AwG. The tools are used widely in the marine, rail, power generation, solar, and heavy transportation industries. The Mid-Current Range Adjustable Crimp Tools are similar to our Standard Adjustable indent Crimp Tool but have an enlarged crimp cavity to accommodate mid-current power contacts. Turret heads and positioners are available to adapt the tool frames to your specific contact/ wire combination. The 8 impression crimp assures absolute maximum tensile strength with almost every closed barrel contact. Special indent configurations are available upon request. For proper operation, the tool must be mated with a multi-position turret head (or a single-position positioner. These are attached by orienting the positioner in the keyed position and by tightening the hex socket screws provided as part of the positioner. A permanent dataplate is affixed to all turret heads and positioners. This plate lists specific contact part numbers, the corresponding position color code (for 3 position turret heads), and suggested selector depth settings for the wire size being used. On most models, crimp depth is con-
trolled by a position selector knob located on the tool frame. The operator simply dials the desired step for the wire being used. This setting can be secured by use of a locking pin or safety wire. As with our Military Standard crimp tools, the cycle controlled ratchet assures a complete crimp every time. The carefully engineered design achieves the absolute maximum mechanical advantage. Periodic gaging is recommended to insure accurate calibration. This can be done easily by setting the tool selector knob to the designated position and checking indenter closure with the GO/NO-GO gage designated for each tool. These tools measure 9 3 4 " x 212" x 114" approximately and weighs less than a pound. NoTE: Crimping wires and contacts in this range requires increased hand force in comparison with other common hand crimpers, therefore use of this hand tool should be limited to short run production and maintenance applications. Powered versions of these tools are available for production and repetitive use (see page 13).
The M320 is designed for Siemens Industrial Automation contacts, 6FX2003 Series. The M320 crimps both the conductor and the insulation. This tool is not available in a pneumatic version.
M320 applicaTions
posiTioner p/n conTacT Mfg. & parT nuMBer
TH579-1
Siemens Industrial Automation 6FX2003-5AA00 (Conductor) Siemens Industrial Automation 6FX2003-5AB00 (Insulation) Siemens Industrial Automation 6FX2003-5AC00 (12 & 16 Conductor, Insulation) Siemens Industrial Automation 6FX2003-5AD00 (Conductor, Insulation)
TH580-1
TH581-1
PAGE 92
www.DMCTools.CoM
The M300BT is designed for pin and socket contracts, AwG sizes 6-14. This tool is available in a pneumatic version, P/N WA27-300BT-EP.
M300BT applicaTions M300BT applicaTions M300BT applicaTions
posiTioner p/n
SP587 SP593 SP604 SP708 SP858 TP1018 TP1029 TP1031 TP1032 TP1033 TP1054 TP1055 TP1059 TP1060 TP1062 TP1064 TP1077 TP1097 TP1111 TP1114 TP1151 TP1159 TP1169
conTacT Mfg. & parT nuMBer

BURNDY RC14P1EOPI-RC12P1EOPI & RC10P1EOPI SOCAPEX CONTACTSSOURIAU 8400 TOOL DEUTSCH 047 1325 08 & 047 1326 08 DEUTSCH 1841-5-5608 & 18-007-08-9056 TYCO # 213552-2 2, 211161-1 ROSEMONT SST SLEEVE (MAC MISSILE SYSTEMS) U.S. NAVY CROUSE HINDS 314263-110 PIN CROUSE HINDS 314262-110 SKT. BG SERVICE 22344-ASSY CROUSE HINDS A600568 MINI-CHANGE STYLE III, 600565 CROUSE HINDS A600568 STYLE MINILINE, 600566 GRN PIN HARTING 09030006214, 09030006215 CROUSE HINDS P1315209-270, -260, -250, -240, -230 CROUSE HINDS P314262-150, -140, -130, -120 CROUSE HINDS P1315366-130, -120, -110 DELTA TECH SLEEVE STOP / COIL ASSY MULTI-CONTACT FRANCE 4FL 4 295 00 AMPHENOL SOCAPEX 17DM53745-201, 17DM53744-201 HYPERTRONICS YSK035-058GT TYCO 212007, 212008, 211159 & 211161 RADIALL 616366 BURNDY 82911679N
posiTioner p/n
TP1188 TP1193 TP1194 TP1222 TP1240 TP1286 TP1318 TP1378 TP1401 TP1404 TP714 TP799 TP800 TP823 TP826 TP827 TP852 TP870 TP887 TP894 TP905 TP907 TP908 TP910

AMPHENOL SOCAPEX 900198-91 CKB S24923-000A3 CKB S24924-000 A3 WIELAND Z2 124 9521 0 REF. FISCHER WIRE & PLASTIC MULTI-CONTACT 7-1261-01e & 7-2102-08 FRAMATOME 8902-210 & 8902-225 CORY CMP004-103 & FCT FMP004-13 GAUTHIER G7500-P10-A0 BURNDY 360J2224B7 SOURIAU 8476-28, 57888, 62622 8476-206 8476-207 RADIALL 282 551 ITT CANNON CDR897-0003, -0006 ITT CANNON CDR897-0004, -0007 CONTACT # E. F. JOHNSON P/N 12-2989-0528-7 ITT CANNON #031-0909-000, 0310908-000 MULTI-CONTACT USA 05,0004 INTERCONNEXION CB-148-8-P, CD132-8-S JUPITER M-8-MS, K-8-MS OCETA
posiTioner p/n
TP916 TP924 TP927 TP929 TP936 TP967 TP968 TP978 TP982 TP986 TH558 TH579

SOURIAU 8819-118, 8819-119 SN 2377K100 LIVINGSTON 51469-1 (OCETA) ELCON 702-31-01107 SOURIAU 8819-176 & -177 ITT CANNON 020436Y0000, 020437Y0000 SIZE 12 ITT CANNON 020434Y0000, 0204357Y0000 SIZE 8 & 12 C.K.B. 0371-0004AS0, 0371-0003AS0 AMPHENOL 17-766-02 AIR LB P/N 001104-620 & 001104-630 BURNDY 3401040 Siemens Industrial Automation 6FX20035AA00 (Conductor) Siemens Industrial Automation 6FX2003-5AB00 (Insulation) Siemens Industrial Automation 6FX20035AC00 (16 & 12 Conductor, Insulation) Siemens Industrial Automation 6FX20035AD00 (Conductor, Insulation) Siemens Industrial Automation 6FX20035AC00 (10 & 8 Conductor, Insulation) Siemens Industrial Automation 6FX20034AB00 (Conductor, Insulation) Siemens Industrial Automation 6FX20034AC00 (16 & 12 Conductor, Insulation)
TH580
TH581
TH632
TH640
TH641 AECMA EN3155-044, EN3155-045 FRB CONNECTRON 0350-24 FRB CONNECTRON 80-0200, 0200-47
www.DMCTools.CoM
PAGE 93
Mid-Current Range Adjustable Indent Crimp Tools
The M309 is designed for pin and socket contracts, AwG sizes 8-18. This tool is available in pneumatic versions, P/Ns WA27-309-2C, WA27-309, WA27-309-EP.
M309 applicaTions posiTioner p/n
TP1014 TP1058 TP1061 TP1063 TP1067 TP1071 TP1072 TP1073 TP1074 TP1075 TP1087 TP1094 TP1116 TP1122 TP1123 TP1124 TP1125 TP1132 TP1138
M309 applicaTions posiTioner p/n

TP1141 TP1150 TP1152 TP1156 TP1164 TP1179 TP1214 TP1221 TP1224 TP1235 TP1244 TP1247 TP1264 TP1265 TP1266 TP1284 TP1296 TP1317 TP1320

REF EWC HARTING 09030006213 CROUSE HINDS P1315209-210 CROUSE HINDS P314262-110 CROUSE HINDS 1463105-110, -120, 1463106-110, -120 FCT FMP002P-, 002P-A, ETC. FMP002 & -, 002S-A, ETC. FCT FMP01-, FMP043S FCT FMP018S -, FMP043S FMP018P -, 043P CROUSE HINDS 600221 TYCO 193796-1, 193797-1, 193841-1, 19382-1 POSITRONIC *C4008D, *C4012D, *C4016D M50130A T & B 222-14-148 OR HARTING 0903006215 TYCO 2-194035-2, -4, -5, -7, -8, & 3-19035-1, -0, -3 TYCO 194032-5, -7 SOURIAU 8291-1682, 8-1683N CONMED 20063

NABSON 062095 MULTI-CONTACT 32-0100 & 32-0500 ODU 345 24 2315 401 BOSTON SCIENTIFIC CORP. BURNDY CONNECTOR SODERBER DS0009B HYPERTRONICS YPN025-002G, YSK025003AH, YPN025-003G, YSK025004AH TYCO 212007-1 / 212008-1 TYCO 194245 TYCO 212013-1 & 212014-1 TYCO 194189 GM POWERTRAIN SOCKET CONTACT TYCO 193846-1 CONEC 610FET1A CONEC 610FET2A BURNDY JVSP00080B & JVSS00080B HYPERTRONICS YSK025-031 & YPN025-024 WIELAND Z2 124 9521 0 GEOSERVICES 4805-136 RETCONN 22-1013 & 22-1036
The M300-25A is designed for Pyle National Starline pin and socket contacts, AwG sizes 10-18. This tool is available in a pneumatic version, P/N WA27CL-25A.
M300-25a applicaTions posiTioner p/n TP682-1 TP683-1 TP684-1 conTacT Mfg. & parT nuMBer PYLE NAT. # 16 & #18 PYLE NAT. #12 PINS PYLE NAT. #10 P&S, & #12 SOCKETS
PAGE 94
www.DMCTools.CoM
The M321 is designed for the rail transportation industry.
M317 applicaTions
posiTioner p/n conTacT Mfg. & parT nuMBer
The M310 is designed for pin and socket contracts, AwG sizes 8-16 and has an enlarged crimp cavity to accommodate oversized contacts.
TP1002 TP1023 TP1024
CKB CC1000C0M006, CC1000C0F006 CKB SE0801-109 & SE0801-108 CKB S24296-000B3 & S24263-000B3 CKB S24265-000A3 CKB S24298-000A3 SOURIAU 8819-176, -177 (SIMILAR TP936 EXCEPT FOR M317) SOURIAU 8819-118, 8819-119 BURNDY J383S1K-0006A01, J383P1K0006A01 CKB SE1239-007 (P), SE0692-130 (S) CKB 669-65 & 669-67 AMPHENOL SOCAPEX 17DM53744-201, -206, -207, 17DM53745-201, -207, -208 F.C.F. 10A-8638PPC100X, 10A-8638PSC100X, 20A-8638PPC200X, 20A-8638PSC200X, 40A-8638PPC400X, 40A-8638PSC400X FRB CONNECTRON 0200-47/80-0200 CKB SOCKET CONTACT CKB PIN CONTACT FRB CONTACTS 0350B11, -B12, -B13, 11-0350, 12-0350, 13-0350 FRB CONNECTRON 0200-42, 73-0200 FRB CONNECTRON 0300-21, 0300-17, 34-0300, 0300-23, 39-0300 FRB CONNECTRON 38 0300 HARTING 0932 000 6107, 6207, 6108, 6208 C.K.B. 0572-1016A4A
M310 applicaTions posiTioner

p/n conTacT Mfg. & parT nuMBer
M310 applicaTions posiTioner

p/n conTacT Mfg. & parT nuMBer
TP1035 TP1036 TP1044 TP1045 TP1052 TP1065 TP1080 TP1131
TP1008 TP1013 TP1019 TP1020 TP1021 TP1022 TP1030 TP1040 TP1041 TP1042 TP1068 TP1088 TP1154 TP1162 TP1216 TP1232
US AIR F18008-08-9056
TYCO 193796-1, 193797-1, 193841-1, 193842-1 TYCO 193837-1 TYCO 193837-2, -3 TYCO 193673-1 TYCO 193673-2, -3
TP793 TP802 TP806 TP807 TP813 TP814 TP880 TP890 TP891 TP902 TP935 TP942 TP944 TP965 TP974 TP999
HYPERTRONICS YSK025-011 + -02, YPN025-009 + -010 FOR FRB CONTACTS 34-0300, 0300-12, 0300-17 FRB CONTACTS 0200-03, 0200-29, 0200-36 SOC. FRB CONTACTS 31-0200, 58-0200, 64-0200 PIN JUPITER CONTACTS BM-2611-5038STBF-201-150ST FOR FRB CONTACT 29-0300 SMIT SLIKKERVEER #F-187306, #F-187307 FRB 0250-B-17G, -20G, 18-0250G, 20-0250G FRB 13-0350G, 0350-B13G, 0350G, 0350-B-12G HYPERTAC HST154 PIN, HST153 SKT HYPERTRONICS YSK035-02G, ETC. HYPERTRONICS YSK035-048
TYCO M310 USE TP944-1 WITH WA27-309-EP
3M CD353 ARRAY 806-0598-000 & 857-0590-130 ARRAY 806-0599-00A, -00B & 857-0591-130/A, -130/B ARRAY 806-0599-000 & 857-0591-130
TYCO 193990 & 193991 TYPE XII (S REMOVED PER AMP) TYCO 193991-1 & -3 (S REMOVED PER AMP)
TP1161
TP1163 TP1338 TP1339 TP805 TP909 TP911 TP912 TP957 TP971
REF. AC & E INDUSTRIES HYPERTRONICS YPN006-124H POSITRONIC INDUS. HYPERTRONICS YPN035-005, -006, -007, YSK035-009, -010, -011 HYPERTRONICS YPN015-031, YSK015-041
FRB CONNECTRON 0300-20, 0300-24 POSITRONICS CONNEI 16600,16601
TP792
oTHer MiD-range Tools

The M316 is designed for crimping Sundstrand Aviation contacts #5905143 onto 16 AWG solid wire.
The M322 is designed for Therm-X Terminal Assembly (pin and socket) contacts. The M327 is designed for Greene Tweed 5672-1998 (pin and socket) contacts.
www.DMCTools.CoM
PAGE 95
Circular Indent Crimp Tools

circular criMp Tools
DMC makes a range of Circular Indent Crimp Tools used primarily for outer shield terminations in contacts. These tools are capable of crimping a circle as small as 0.040" and as large as 0.262". Due to the nature of crimping a complete circle, with four equal segments each tool is specified for a certain diameter. See the charts on this page for diameter sizes and part numbers.
circular criMp Tools By criMp DiMension circular criMp DiMension
0.040-0.045" 0.042-0.046" 0.059-0.064" 0.061-0.065" 0.065-0.099" 0.080-0.084" 0.086-0.090" 0.093-0.097" 0.096-0.100" 0.124-0.128" 0.140-0.144" 0.142-0.146" 0.154-0.158" 0.156-0.160" 0.167-0.171" 0.190-0.194" 0.197-0.201" 0.234-0.238" 0.258-0.262" GS216 GS210 GS211 GS205 GS8-3 GS212 GS225 GS221 GS222 GS223 GS226 GS218 GS201 GS101 GS227 GS219 GS208 GS213 GS206 G753 G925 G226 G450 G941 G732 G919 G881 G120 G917 G1056 G443 G446 G445 G1057 G848 G533 G926 G426
circular criMp Tools By parT nuMBer gage Tool p/n

GS101 GS201 GS205 GS206 GS208 GS210 GS211 GS212 GS213 GS216 GS218 GS219 GS221 GS222 GS223 GS225 GS226 GS227 GS8-3
Tool p/n
circular criMp DiMension

0.156-0.160" 0.154-0.158" 0.061-0.065" 0.258-0.262" 0.197-0.201" 0.042-0.046" 0.059-0.064" 0.080-0.084" 0.234-0.238" 0.040-0.045" 0.142-0.146" 0.190-0.194" 0.093-0.097" 0.096-0.100" 0.124-0.128" 0.086-0.090" 0.140-0.144" 0.167-0.171" 0.065-0.099"
gage
G445 G446 G450 G426 G533 G925 G226 G732 G926 G753 G443 G848 G881 G120 G917 G919 G1056 G1057 G941
PAGE 96
www.DMCTools.CoM
Dedicated Application Circular Crimp Tools

DeDicateD application circular crimp tools
Some of our Circular Crimp Tools already have with turrets & positioners custom designed to accommodate common contacts. See the tool selection charts on the next page.
DeDicateD application circular crimp tools tool p/n application crimp Dimension GaGe positioners available
GS100 GS200 GS209 GS212 GS218
Tyco, Amphenol, & Radiall Contacts (See Chart) Amphenol/Bendix, Radiall, & Tri-Star Contacts (See Chart Below) Amphenol Intermediate Contacts 21-33197-10, 21-33198-10 Amphenol & Sabritec Contacts (See Chart Below) Amphenol Contacts 10-589514-126, NZGC-X50-12PB-5, NZGC-X50-12SB-5, NZGC-X75-12PB-6, NZGC-X75-12SB-6 Positronic MC11NS, FC112N2S, FC112N2S-1565.0 Positronic FC610N2S, MC610NS, SK4195, SK4196 Amphenol 21-33908-29, 21-33909-29 Deutsch Contact 59155-000-Socket, 59155-000-Pin Unstripped Wire End Caps Pneumatic Version: WA27XE-EP 8 Step Tool
0.096-0.100 0.142-0.146 0.154-0.158 0.080-0.084 0.142-0.146
G120 G443 G446 G732 G443
6 5 1 10 1
GS222 GS223 GS225 GS227 GS2XE GS8-3
0.096-0.100 0.124-0.128 0.086-0.090 0.167- 0.171 0.123-0.129 0.134-0.140 0.065-0.099
G120 G917 G919 G1057 G719 G941
1 2 1 1 1 1
positioner list for Gs100 positioner

GP1256 GP295 GP385 GP425 GP475 GP926

GP1015 GP1120 GP1121 GP1243 GP1613 TH553 TP1359 TP1360 TP1361 TP1369
contact mfG. & p/n

AMPHENOL 21-33655-5 SINGLE POSITIONER MIL-C-24308 OUTER PIN & SOC. AMP P71-2979-3,4,5,6 , P71-2980-1,2 AMP P71-2979-3, 4, 5, 6 & P71-2980-1, 2 AMP P71-2979 , P71-2980 RADIALL EPX 617130, 617131, 617132, 617030, 617031, 617032
contact mfG. & p/n

DEUTSCH 533 433-4 AMPHENOL 21-33908-3 ASS'Y AMPHENOL 21-33909-3 ASS'Y AMPHENOL 21-33754-2 AMPHENOL 21-33908-25 & 21-33909-25 Amphenol Intermediate Contacts L-38151-897, L-38151907 SABRITEC SL-10 SABRITEC SL-12 SABRITEC SL-14 SABRITEC SL-16

GP1596 GP1256 GP781 GP926 G2P330
contact mfG. & p/n

TRI-STAR 317-16CX-091 AMPHENOL 21-33655-5 INTERMEDIATE BRAID #10 TRIAXIAL CONTACT RADIALL EPX 617130, 617131, 617132, 617030, 617031, 617032 #12 BENDIX COAX GS200

TP1386 TP1458
contact mfG. & p/n

POSITRONIC FC610N2S & MC610NS POSITRONIC SK4195 & SK4196

TH551

TP1366
contact mfG. & p/n

Amphenol 21-33197-10, 21-33198-10 Intermediate Contact
contact mfG. & p/n

POSITRONIC MC112NS; FC112N2S; FC112N2S-1565.0

GP1611
contact mfG. & p/n

AMPHENOL 21-33908-29 & 21-33909-29
www.DMCTools.CoM
PAGE 97
Header Left Special Application Indent Crimp Tooling Subheadline

To keep pace with the most recent developments in technology, DMC is often called upon to custom engineer tooling for the medical, telecommunication, electronics, aerospace, and alternative energy industries. Some of these applications require unique indent configurations, special materials, and multi-stage crimps. Some of the special application tools weve developed in the past are listed on the following pages. DMC is ready and capable to help satisfy your tooling needs with custom engineered tools and dies. Contact us with your requirements.
fine tippeD inDenter tools (moDels mH835 & mH992)

The MH835 & MH992 Fine Tipped Indentor tools are similar to the AFM8 miniature adjustable indent crimp tool, but have sharper indentor tips measuring .07 inches. The MH835 tool produces a 4-indent crimp while the MH992 tool produces an 8-indent crimp. The MH835 has eight crimp settings from 0.0070" to 0.0325" and is gaged with the G619 Go/No-Go gage. The pneumatic power version of this tool is the wA22BH. The MH992 has eight crimp settings from 0.0070" to 0.0330" and is gaged with the G822 Go/No-Go gage. The tool is 634" in length and weighs approximately 10 oz. The pneumatic power version of this tool is the WA22AE.
MH835 Positioners P/n K1618 K1643 K1688S K1705 K1706 K1735S K1754SP K1761SP K1762 G619 DesCriPtion POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER GAGE PUrPose 2999803003 Cinch B882D05 ATI 92286 NDC Nitinol D4601-L3 Signal Integrity E5656-H8 Signal Integrity 100.005.955 Kistler 8300-0165 Ulti-Mate 30/30/00/000 Glenair 31/30/00/000 Glenair Go-No Go Test for MH835 K1072 K1183S K1303 K1304 K1360 K1409 K1597 K1605 K1624 K1631 K1632 K1702S K1704S K1709S K1721 K1730S K1733S K1734S K1739S K1744 K1751S K1752S K1755 K1756 K1764 G822
MH992 Positioners P/n DesCriPtion

POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER GAGE
PUrPose
Tri-Tech D1003, Eli Connectors M39029/102-559 SKT M39029/103-559 PIN 21-33664-7M, 21-3365-7M Amphenol Rosenberger Packets D-G Cook Inc 6362-223-1231 Deutsch 2999804004 Cinch 6362-226-1231, 6362-227-1231 Deutsch Medical Implant Cochler .028x.100LG Ferrule Accellent #12 Quadrax Pin/Socket W. L. Gore & Assoc 3362-204-1231 Deutsch 859-006 Glenair 857-000-280 Ultra Precision 3061-0-19-xx-21-xx10-0 Mill-Max ETH4-0011A-D ETH40012A-D Souriau 1996972-2 Tyco 610870 Deutsch TEM Samtec C-295-XX-X Samtec 1996972-2 Tyco 1996972-4 Tyco BNC7T-P-C-M-ST-CA6PIN Samtec Go-No Go Test for MH992
Other Positioners Available
PAGE 98
www.DMCTools.CoM
Special Application Indent Crimp Tooling

ultra precision crimp tool (moDel mH800)
All DMC tools are designed and built to the highest standards of precision and quality, but some applications call for more. One such case is contacts which have extremely thin wire barrel dimensions. The answer to this demand is the model MH800 Ultra Precision Crimp Tool which utilizes the same basic components as the Model AFM8 (M22520/2-01) Crimp Tool with tighter gaging tolerances and a special indenter tip configuration that assures a uniform flow of metal during the crimping operation. The model MH800 accommodates wire sizes 20 thru 32 AWG (the miniature to sub-miniature range). It accommodates the K series or M22520/2-XX positioners and is easily identified by a distinctive orange handle grip. It is 634 in length and weighs approximately 10 oz. Gaging is accomplished with the G100 GO/ NO-GO gage. The pneumatic power version of this tool is the WA22H.
P/n
K4
MH800 Positioners DesCriPtion

POSITIONER
PUrPose
2202-16-0101 PIN, 2203-8-0101 PIN STK Deutsch
K5
POSITIONER
2202-17-0101 SOC, 2203-9-0101 SOC STK Deutsch
K30C K127
POSITIONER POSITIONER
Deutsch Coax 2841-5-++00 RSM 2803-4-++00 RSM 100060-++TJ 2841-13-++00 RSM 2803-10-++00 RSM Deutsch
G100
GAGE
Go-No Go Test for MH800
stainless steel inDenter crimp tool (moDel mH820 & mH820p)

The MH820 Stainless Steel Indentor Crimp Tool is similar to the AFM8 miniature adjustable indent crimp tool, but has indentors made from stainless steel to crimp harder materiels and extend the indentor life. The MH820 has eight crimp settings from 0.011 to 0.038 and is gaged with the G212 Go/No-Go gage. The tool is 634 in length and weighs approximately 10 oz. The pneumatic power version of this tool is the WA22M.
MH820 Positioners P/n AC702 K166 K277 K278 K1572SP K1573 K1740S G212 DesCriPtion POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER POSITIONER GAGE PUrPose Meditech Wire Brush 294-1514 Mini-Tac Pin Amphenol 221-759P, 357301-03 Amphenol 221-760S, 357301-04 Amphenol 582-110-2828 (Socket) Amphenol 582-110-28283 Amphenol ACB4P, ACB4S Center Contact Axon Go-No Go Test for MH820
www.DMCTools.CoM
PAGE 99
Special Application Indent Crimp Tooling

BIASED CRIMP TOOLS (MODELS SC8 & MH993)
Our Biased Crimp tools have a 4 indent pattern with the flat-tipped indentors that are offset at an angle of 45 degrees to produce a radial or spiral pattern around the application, typically a seamed or formed barrel contacts. This indent pattern is also useful for holding springs (or spring like devices) to a tube or solid rod. We offer two Biased Crimp tools, the SC8 for sizes 12 thru 26 AWG and the MH993 for 20 thru 32 AWG.
SC8
sc8 biaseD crimp tool Dmc p/n TP1189 Description POSITIONER POSITIONER POSITIONER POSITIONER GAGE purpose CONXALL 680-SG CONXALL 586-SG CONXALL 5053-20 GS (SC8) (SC8) (SC8)
The model sC8 has single flat-tipped indentors and accommodates wire sizes 12 thru 26 AWG (the miniature to sub-miniature range). It accommodates the TP series positioners and is easily identified by a distinctive black body and grey handle grip. It is 934" in length and weighs approximately 15 oz. Gaging is accomplished with the G125 GO/ NO-GO gage. The pneumatic power version of this tool is the WA27AJ.
TP1190 TP1191 TP1621 G125
CONXALL 587-PGN5 & 586-SUN

Go-No Go Test for SC8
MH993
mH993 biaseD crimp tool
The model MH993 has double tipped indentors and accommodates wire sizes 20 thru 32 AWG (the miniature to subminiature range). It accommodates the K series positioners. It is 634" in length and weighs approximately 10 oz. Gaging is accomplished with the G125 GO/ NO-GO gage. The pneumatic power version of this tool is the WA22BC.
PAGE 100
Dmc p/n K484 K1287S K1732 K1749 G125
Description POSITIONER POSITIONER POSITIONER POSITIONER GAGE
purpose 65-275-1 (26-30), 65-275-2 (20-24) 610-110-101 Virginia Panel 587-PGN5 Conxall 587-PGN Conxall
Go-No Go Test for MH993
www.DMCTools.CoM
Dedicated Application Indent Crimp Tooling

TWO-LEVEL INDENT CRIMP TOOL FOR BURNDY YHMM SERIES CONTACTS (MODEL LH8)
The lH8 tool produces both conductor and insulation crimps simultaneously on Burndy YHMM series contacts used in many aircraft wiring systems (Boeing contact designations BACC47DE4 & BACC47DE5). It is functionally comparable to the Burndy M10S-1 crimp tool with S1 Die & SL-53 Stop Bushing (Combination). The tool comes with a dedicated turret head positioner, LH281. It is gaged with gages G687 for the conductor & G743 for the insulation. The tool is approximately 934"x 212" x 114"and weighs 15 oz. The pneumatic power version of this tool is the wA27lH.
MIL-C-22442/32-1 CLAMPING RING CRIMP TOOL

The Gs217 is designed to crimp clamping and retaining rings onto cable or wire in accordance with MIL-C-22442/32-1. The tool has 3 selector settings which crimp from 0.150 to 0.195. The tool is approximately 934" x 212" x 114" and weighs 15 oz. The pneumatic power version of this tool is the WA27AD. The assigned Turret Head is the SH556 which accepts cable diameters from 0.110" to 0.195". Positioner TP975 is also available to crimp Astrocom Electronics Clamping Ring P/N 20822.
Other special indent tools are available, please consult DMC.

PAGE 101
GMT Series Precision Crimp Tools

DMC provides custom and standard crimp tools manufactured to OEM connector supplier or user requirements. Often these tools are specified as comparable in function to the OEM connector supplier tool. Numerous applications such as open barrel (stamped and formed) contacts, insulated and non-insulated terminals, splices, end caps, coaxial connectors, and wire fittings of all types are covered by these tools. The rugged construction of this tool assures repeatability and long life cycle. You can rely on DMC experience for quality and cost effective performance. GMT General Purpose Tools: Many standard OEM applications are covered by the GMT general purpose tool series. The jaws are fixed, and the locator (where used) is configured to hold the contacts precisely in the correct location for optimum crimping.
Pneumatic & Battery tools are available to cover the GMT tool series. See page 103 for part numbers.
Gmt1090 (m22520/44-01) tool for m81824/12-xx colD applieD splices
The GMT1090 (M22520/44-01) Hand Crimp Tool crimps Tycos Cold Applied Environmental Splices (M81824/12-xx) sizes 26-20, 20-16, 16-12 AWG. This precise tool has a locator which is configured to hold the splice in the correct location while either wire is being terminated. No heat, or heat gun, required. Pneumatic Equv PMT1090
Gmt232 (m22520/37-01) tool for m81824/1-xx environmental splices
The GMT232 (M22520/37-01) Hand Crimp Tool crimps low profile environmental splices (M81824/1-xx). The GMT232 is the most popular tool to cover the range of 12 (yellow), 16 (blue), and 20 (red) splices for low profile environmental splice applications. The GMT232 has a locator which is configured to hold the splice in the correct location while either wire is being terminated. This tool is comparable to the popular Tyco AD1377. Pneumatic Equv PMT232
Gmt1005 tool for uninsulateD terminals
The GMT1005 Hand Crimp Tool terminates uninsulated terminals sizes 10 to 22 AWG. This tool is comparable to Tyco Electronics 49935 hand tool. Pneumatic Equv PMT1005
PAGE 102
www.DMCTools.CoM
Gmt tool series part numbers HanD tool p/n GMT201 GMT202 GMT203 GMT204 GMT206 GMT208 GMT209 GMT211 GMT220 GMT221 GMT225 GMT226 GMT230 GMT232 GMT241 GMT245 GMT247 GMT248 GMT260 GMT262 GMT263 GMT277 battery tool p/n GMTEB201 GMTEB202 GMTEB203 GMTEB204 GMTEB206 GMTEB208 GMTEB209 GMTEB211 GMTEB220 GMTEB221 GMTEB225 GMTEB226 GMTEB230 GMTEB232 GMTEB241 GMTEB245 GMTEB247 GMTEB248 GMTEB260 GMTEB262 GMTEB263 GMTEB277 remote HeaD battery tool p/n GMTE201-R GMTE202-R GMTE203-R GMTE204-R GMTE206-R GMTE208-R GMTE209-R GMTE211-R GMTE220-R GMTE221-R GMTE225-R GMTE226-R GMTE230-R GMTE232-R GMTE241-R GMTE245-R GMTE247-R GMTE248-R GMTE260-R GMTE262-R GMTE263-R GMTE277-R pneumatic tool p/n PMT201 PMT202 PMT203 PMT204 PMT206 PMT208 PMT209 PMT211 PMT220 PMT221 PMT225 PMT226 PMT230 PMT232 PMT241 PMT245 PMT247 PMT248 PMT260 PMT262 PMT263 PMT277 application / Description Molex .093 Dia Standard Pin & Socket Terminals, Clapscon Series Molex .062 Dia Standard Pin & Socket Terminals, KK, Flat Blade, Pitch Crimp Molex .156 KK Trifurcon Series Molex .093 Dia Clapscon Series ITT Cannon Zif Connector, Series DL Tyco Multimate Type III+ Series Elco 60-8017-0313 Tyco PCB Terminals and Disconnects, .058 Dia Tyco Type XI Contacts Rockwell Collins Thin-Line I & II Tyco AMPMODU Series Type MOD IV Contacts Tyco Amplimite Series, Size 20DF Tyco AMPMODU Series Type IV, IV1/2 & V Contacts M22520/37-01 tool for M81824/1-X Splices Tyco (Raychem) Mini-Seal Environmental Splices (26-20, 20-16, 16-12) Tyco CPC Series, Size 20DF Contacts Tyco Mate-N-Lok Series 60620-( ) and 60619-( ) ITT Cannon D-Sub Economy Standard Size 20 Comparable to Pyle-National TP-201389 (w/ Cutter) ITT Cannon DL Series ZIF Contacts, CCT-DL-3 Tyco Amp-TAB Series 66168, 66143, 66169, 66144 Teradyne 600-0026-000 I/O Series Contacts M22520/38-01 for MS20659 Uninsulated Ring terminals size 22 through 10 and MS25486 external power plug socket contact size 12 (Superseeds M22520/24-01) Tyco Contact 925576 Tyco Locking Clip Contact 87165 ITT Cannon CCT-UBC Amp Tyco tool 144969-2 Uninsulated Terminals (Tyco Tool 49935) Tyco Cold Applied Environmental Splice (26-20, 20-16, 16-12)
GMT286 GMT295 GMT302 GMT309 GMT1005 GMT1090
GMTEB286 GMTEB295 GMTEB302 GMTEB309 GMTEB1005 GMTEB1090
GMTE286-R GMTE295-R GMTE302-R GMTE309-R GMTE1005-R GMTE1090-R
PMT286 PMT295 PMT302 PMT309 PMT1005 PMT1090
www.DMCTools.CoM
PAGE 103
Battery Powered Hydraulic GMT Series Crimp Tools

DMC is pleased to present our GMT Series battery powered hydraulic tools to crimp open barrel (stamped and formed) contacts, insulated and non-insulated terminals, splices, and end caps, coaxial connectors, and wire fittings of all types are covered by these tools. Just like with the hand tools, locators are included for applications where they are needed to hold contacts in the correct location for optimum crimping. FEATUREs Ergonomic design allows one-handed operation Jaws remain closed under spring pressure (pinch sides to open/load Head rotates 350 degrees Red LED to display the charge status of the battery CRIMP CAPACITIES Max. Crimp Force: 4 Tons (35.6 kN) Avg. Crimp Time: 3 seconds Avg. Crimps per Charge: 100 Avg. Charge time: 15 minutes SPECIFICATIONS Length: 13" (330 mm) Width: 2.87" (72.9 mm) Depth: 4.5" (114.3 mm) Weight (with battery): 2.8 lb (1.3 kg) Hydraulic Oil: Shell Tellus T-15 (or equivalent)
Gmtebxxx
The GMTEBxxx Series Battery Powered Hydraulic Commercial Standard Crimp Tools are hand held, self-contained crimp tools. The crimp head, battery, and pump unit are contained in one ergonomic tool body and weigh about 4 pound each. They are equivalent to DMCs GMT Series hand tools. Tool INClUDEs: Carrying Case, Two 18v Batteries (p/n HDE-LI-B), One Battery Charger (p/n HDE-LI-120C).
GMTEB232 FOR M81824/1-XX ENVIRONMENTAL SPLICES GMTEB232 Tool is the battery powered equivalent to our GMT232 (M22520/37-1) hand tool for low profile environmental splices (M81824/1-XX). The GMTEB232 is the most popular GMT Series tool to cover the range of 12 (yellow), 16 (blue), and 20 (red) splices for low profile environmental splice applications. This precise tool has a locator which is configured to hold the splice in the correct location while either wire is being terminated.
PAGE 104
www.DMCTools.CoM
Gmtexxx-r remote HeaD battery powereD HyDraulic crimp tools

The GMTExxx-R Remote Head Battery Powered Hydraulic Crimp Tools are hand held, self-contained crimp tools. The crimp head is separate from the battery and pump unit by a hydraulic umbilical cord. This reduces the held weight to 2 pounds, about the same as the hand tool. These tools are equivalent to DMCs GMT Series hand tools. The battery and pump unit can be worn by the operator on a tool belt, stored in a carrying case, or mounted to a bench top. Tool INClUDEs: Two Batteries (p/n HD-BATTERY-R), One Battery Charger (p/n HD-110CHARGER-R). Tool Belt, AC Adapter, and Bench Mount sold separately. FEATUREs Ergonomic design allows onehanded operation Jaws remain closed under spring pressure Connection point for tool balancing systems CRIMP CAPACITIES Max Crimp Force: 3500lb/15.6kN Max Oil Pressure: 4000psi/276 bar Max Crimp Time: Approx. 3.5 seconds Crimps per Charge: Approx. 250 (May vary with crimp force requirements & battery life.)
Gmtexxx-r
The battery and pump unit can be worn on a tool belt (p/n 2063863-1) TOOL SPECIFICATIONS CRIMP Tool Length: 9.25"/235mm Width: 2.5"/63.5mm Depth: 2.5"/63.5mm Mass/Weight: 2.02lb/.916kg Sound Level: 72db Hose Length: 4.5ft PowER UNIT (With Battery Installed) Length: 9.8"/248mm Width: 3.1"/80mm Depth: 5.6"/142mm Weight: 4.3 lb/2.0 kg Sound Level: 72 dBA Hydraulic Oil: 1.7 oz./ 48g Shell Tellus* T15 Charging Voltage: 10.8 VDC Lithium Ion Battery Charging Time: 40 Minutes (Approximately) GMTE232-R FOR M81824/1-XX ENVIRONMENTAL SPLICES GMTE232-R Tool is the battery powered equivalent to our GMT232 (M22520/37-1) hand tool for low profile environmental splices (M81824/1-XX). The GMTE232-R is the most popular GMT Series tool to cover the range of 12 (yellow), 16 (blue), and 20 (red) splices for low profile environmental splice applications (Tyco Mini-Seal). This precise tool has a locator which is configured to hold the splice in the correct location while either wire is being terminated.
used with an AC Adapter (p/n HD-110AC)...
or mounted to a bench top (p/n BM-7).
www.DMCTools.CoM
PAGE 105
DCT Series Crimp Tools

DMC provides custom and standard crimp tools that are manufactured to connector OEM or user requirements. Often these tools are specified as comparable in function to the OEM connector supplier tool. The DCT series of crimp tools and dies accommodate most (insulated and uninsulated terminals and splices conforming to AS7928 insulated and uninsulated as well as numerous proprietary configurations. Dies in various crimp patterns are also available for D-Subminiature, circular connectors, Red/ Blue/Yellow Heat-N-Seal terminals, MiniSeal terminals, and low profile environmental splices (M81824/1-XX). Dies are configured with single, double, triple and even quadruple crimp cavities. Several models and types of tools comprise the DCT tool series. Some tools have removable (interchangeable) dies, and others have fixed cavities that are not removable. If your application requirement is not already covered by one of our standard die sets, our engineering department will be pleased to discuss a design to suit your needs, consult DMC for details. DCTE4B-XXX SERIES BATTERY POWERED HYDRAULIC CRIMP TOOL The DCTE4B Battery Powered Crimp Tools offer the portability of a hand tool with the stamina of a power tool! They are hand held, self-contained hydraulic crimp tools intended for use with DMCs DCT4 Dies. The DCTE4B battery tools are approximately 13.25 long, 2.87 wide, and 4.5 deep, weigh 2.8 lb with the battery installed. Tool INClUDEs: Carrying Case, Two 18v Batteries (p/n HDE-LI-B), One Battery Charger (p/n HDE-LI-120C).
FEATUREs Ergonomic design allows one-handed operation Die automatically opens when crimp is complete Head rotates 350 Red LED to display the current status of the unit Accepts dies from other sources (consult DMC) Positive Cycle Control Pressure Sensing Design
DCT4-XXX SERIES HAND CRIMP TOOLS The sturdy construction of the DCT hand tools is superior to any tool made today. The handle will not flex or bend in any direction, therefore the maximum force and repeatability are achieved. The precision ratchet controls cycling of the tool and assures the same accurate crimp every time. The handle grips and the leverage system are designed for maximum ergonomic benefit. The DCT tools are approximately 934" x 318" x 114" and weigh 1.38 lbs.
PAGE 106
www.DMCTools.CoM
Dct4 tool series Dies Die p/n

DCT4-101
Dct4 tool series Dies Die p/n

DCT4-149 DCT4-151 DCT4-154 DCT4-155 DCT4-157 DCT4-158 DCT4-160 DCT4-161 DCT4-162 DCT4-163
Description
Insulated Spare Wire Caps Comparable to AMP 58573-1 R/B/Y Insulated Terminals & Splices #22-18 AWG, 16-14 AWG, 12-10 AWG R/B/Y ROSTRA HEAT-N-SEAL Uninsulated Terminals RF Connectors .178/ .128 hexes RF Connectors .068/.178/.324 hexes .068/.213/.255 hexes .213/.128/.105 hexes TOMPETER CD3-2 with .324/.255/.068/.042 hexes COAXIAL AND FIRE BOTTLE CAP INDICATOR .128 hex .255/.213/.178/.128 hexes .213/.178 hexes Insulated Terminals & Splices # 24-20 AWG, # 22-18 AWG, AND # 16-14 AWG w/ Locator RG58/U, RG59/U, RG62/U .359/.255 hexes .039 square/ .195 hexes Insulated Terminals & Splices # 24-20 AWG, #22-18 AWG AND #16-14 AWG .068 / .128 / .178 hexes Comparable to Amphenol CTL-9 .211/.128/.105 hexes
Description
COAXIAL CABLE ST212, ST214, BT2002, BT3002 .268/.213/.178/.150 hexes D-SUBMINIATURE 20-30 AWG .028 / .047 SQ, .128 / .178 Hexes .028 / .047 SQ, .15 / .268 Hexes .211 / .252 / .068 hexes .212 / .252 / .066 hexes .041 gage for "B" crimp .041 gage for "B" crimp .042 gage for "B" crimp .290 DIA cavity .187 / .178 hexes, .042 SQ Comparable to Amphenol CTL-15 .324 / .319 / .255 hexes, .042 SQ Comparable to Amphenol CTL-14 .324 / .255 / .068 hexes, .052 SQ Comparable to Amphenol CTL-8 .290 / .128 / .105 hexes Rosenberger 88K20K-0S-3H3 AMP Multimate III & VI Comparable to DIE Y498 B Crimp B Crimp Tyco AMPMODU Series
DCT4-102 DCT4-104 DCT4-105 DCT4-106 DCT4-107 DCT4-108 DCT4-109 DCT4-110 DCT4-111 DCT4-117 DCT4-118 DCT4-119 DCT4-120 DCT4-121 DCT4-122 DCT4-124
DCT4-166
DCT4-167
DCT4-169 DCT4-170 DCT4-173 DCT4-175 DCT4-176 DCT4-178 DCT4-179
DCT4-128
CANNON CCT-DM Comparable to DieY322 Same configuration as M22520/37-1 for M81824/1-X Splices
DCT4-129
Tyco (Raychem) Mini-Seal Environmental Splices (26-20, 20-16, 16-12) SUB-D CONTACTS 20-24/24-28 Coaxial Crimp Tool .264/.161 hexes .264/.220 hexes .433/.402 hexes B-CRIMP COND. & INS. 16-22 AWG, 14-16 AWG, 10-12 AWG with .142/.112/.079 hexes Coaxial Crimp Tool .359/.290 hexes Coaxial Crimp Tool .454 hex .429/.100/.068 hexes .268/.178 hexes, .057 dia.
DCT4-180
Type IV, IV1/2 & V Contacts Comparable to AMP 90340
DCT4-130 DCT4-138 DCT4-139 DCT4-140 DCT4-141 DCT4-142 DCT4-144 DCT4-145 DCT4-147 DCT4-148
DCT4181D DCT4182D DCT4-183 DCT4-185 DCT4-187 DCT4-188 DCT4-189 DCT4-191 DCT4-192
Molex 734154550 (1 of 2) Molex 734154550 (2 of 2) .339 Hex White and Yellow Terminals .215 / .225 / .235 Hexes .110 Hex Comparable to MRP0478 Comparable to BURNDY MR8-9Q Comparable to AMP 68064
www.DMCTools.CoM
PAGE 107
Hydrac Hydraulic 3.5 Ton Crimping Tool for Y-Dies

HD37 Hydraulic Crimpers are a combination of lightweight design and the precise application of 3.5 tons force to crimp power contacts too large for conventional hand tools. These tools are designed to accept the entire family of M22520/5-XX dies (Y-dies) for crimping terminals, lugs or any other special applications. (DMC Y series dies featured on pages 71 and 77. If your application requirement is not already covered by one of our standard dies, our engineering department will be pleased to discuss a design to suit your needs, consult DMC for details. WIRE RANGE: #26 to #2 AWG in many power applications, and .500 (12.7mm) in coaxial hexagonal crimping.
HDE37B BATTERY POWERED HYDRAULIC CRIMP TOOL
HD37 MANUAL TOOL For the hand tool, the 3.5 ton crimp force is achieved through multiple actuations of the tool handle. The automatic relief valve clicks audibly when the proper crimp force has been applied to prevent over-compression. The tool head also rotates to any position for easy accessibility in confined working areas. The hand tool is 8.5 inches long, weighs only 3.3 lbs, and is operated with one hand. 3.5 tons of die force. Interchangeable die sets. Automatic relief valve to prevent over-compression Release lever for relaxing crimp pressure and opening dies mid-cycle 180 rotating head for ease in confined work areas. Each tool supplied in a fitted carrying case
The HDE37B Battery Powered Crimp Tool offers the portability of a hand tool with the stamina of a power tool! It is a hand held, selfcontained hydraulic crimp tool that is actuated with a single squeeze of the trigger. The HDE37B offers a solution where the volume of work exceeds the physical limits of a worker with hand tools, and hoses and cables are unwelcome or unsafe for the environment where the work is being performed. The HDE37B battery tool is approximately 13.25" long, 2.87" wide, and 4.5" deep, weighs 2.8 lb with the battery installed. Tool INClUDEs: Carrying Case, Two 18v Batteries (p/n HDE-LI-B), One Battery Charger (p/n HDE-LI-120C).
LArGe GAGe insULAteD terMinALs-Ms25036 AWG siZe

#8-RED #6-BLUE
P/n
HD37 or HDE37B or EHCY HD37 or HDE37B or EHCY
PArt Die P/n

Y673H Y674H
CriMP HeiGHt
0.17" 0.202"
GAGe
G682 G683
LArGe GAGe UninsULAteD terMinALs-Ms20659 AWG siZe

#8-RED #8-RED #6-BLUE #6-BLUE
P/n
HD37 or HDE37B or EHCY HD37 or HDE37B or EHCY HD37 or HDE37B or EHCY HD37 or HDE37B or EHCY
PArt Die P/n

Y844HN Y845HN Y846HN Y847HN
CriMP HeiGHt
0.135" 0.135" 0.176" 0.176"
inDent
SGL DBL SGL DBL
GAGe
G744 G744 G745 G745
FEATUREs Ergonomic design allows one-handed operation Interchangeable die sets. Die automatically opens when crimp is complete Die can be retracted in mid-cycle to adjust connector Head rotates 350 degrees Red LED to display the current status of the unit
otHer Dies AWG siZe

0.202" Hex Crimp
P/n
HD37 or HDE37B or EHCY
PArt P/n
Y870H
CriMP HeiGHt
0.202"
GAGe
G724
PAGE 108
www.DMCTools.CoM
Hydrac Hydraulic 3.5 Ton Crimping Tool for HD36 Dies

HD36 manual HyDraulic tool HD36 Hydraulic Crimper is a combination of a lightweight design and the precise application of 3.5 tons force to crimp power contacts too large for conventional hand tools. This tool is designed to accept the entire family of D36 dies for crimping terminals, lugs or any other special applications. The 3.5 ton crimp force is achieved through multiple actuations of the tool handle. The automatic relief valve clicks audibly when the proper crimp force has been applied to prevent overcompression. The tool head also rotates 360 degrees for easy accessibility in confined working areas. The hand tool is 8.5 inches long, weighs only 3.3 lbs, and is operated with one hand. If your application requirement is not already covered by one of our standard dies, our engineering department will be pleased to discuss a design to suit your needs, consult DMC for details. 3.5 tons of die force. Interchangeable die sets. Automatic relief valve to prevent over-compression Release lever for relaxing crimp pressure and opening dies mid-cycle 180 rotating head for ease in confined work areas. Each tool supplied in a fitted carrying case
HD36 tool series Dies

Die set p/n
HD36-101 HD36-102 HD36-103 HD36-104 HD36-105N HD36-106N HD36-107N HD36-109 HD36-110N HD36-111N HD36-112N HD36-113N HD36-114N HD36-115N HD36-116N HD36-124 HD36-125 HD36-126 HD36-128 HD36-130 HD36-131 HD36-132 HD36-135 HD36-136 HD36-137 HD36-138 HD36-139 HD36-142
a crimp HeiGHt
.552-DIA. .420-RAD. 0.530 .750-GAGE 0.198 0.222 0.280 .520-GAGE 0.530 .135-GAGE .176-GAGE .206-GAGE .265-GAGE 0.226 0.284 0.390 0.600 0.217 0.160 .130-GAGE 0.446 0.487 0.110 .240 GAGE .272 GAGE .176 GAGE .204 GAGE .144 SQ.
a lenGtH
0.180 0.180 0.365 0.225 0.185 0.185 0.155 0.340 0.344 0.312 0.312 0.344 0.344 0.110 0.110 0.344 0.344 0.344 0.344 0.344 0.344 0.344 0.100 0.375 0.375 0.202 0.250 0.344
b crimp HeiGHt
b lenGtH
type/application
Single Cavity Circular Corresponds To HUSKIE HD-58 Single Cavity Circular Corresponds To HUSKIE HD-34 Single Cavity Hex Single Cavity Hex, Corresponds To HOMAC 840 Single Cavity Hex Single Cavity Hex Single Cavity Hex Single Cavity Hex, Corresponds To HOMAC 5/8 Corresponds To T&B 683-53701-1 #8 Non-Insulated Single Indent #6 Non-Insulated Single Indent #4 Non-Insulated Single Indent #2 Non-Insulated Single Indent
0.169 0.114
0.110 0.110
Double Cavity Hex Corresponds To PEN-011-2, & PEN-011-3 Double Cavity Hex Corresponds To PEN-011-1, & PEN-011-4 Single Cavity Hex Single Cavity Hex Single Cavity Hex Single Cavity Hex Single Indent for Flag Terminals 1/0 Non-Insulated Terminal Lug 2/0 Non-Insulated Terminal Lug HDE36 GAGING DIE #6 INSULATED (BLUE), Corresponds To AMP 1490598-1 #4 Insulated (YELLOW), Corresponds To AMP 1490599-1
0.111
0.202
Non-Insulated Single Indent #8 Insulated (RED), Corresponds To AMP 1490597-1 Single Cavity Circular
www.DMCTools.CoM
PAGE 109
Battery Powered Hydraulic 4 Ton Crimp Tool for HD36 Dies

HDe36b battery powereD HyDraulic crimp tool for HD36 Dies
The HDE36B Battery Powered Crimp Tool offers the portability of a hand tool with the stamina of a power tool! It is a hand held, self-contained, 4 ton hydraulic crimp tool that is actuated with a single squeeze of the trigger. This tool is designed to accept the entire family of D36 dies for crimping terminals, lugs or any other special applications. WIRE RANGE: #8 to #0 AWG* in many power applications, and .750 (19.05mm) in coaxial hexagonal crimping. The HDE36B offers a solution where the volume of work exceeds the physical limits of a worker with hand tools, and hoses and cables are unwelcome or unsafe for the environment where the work is being performed. The HDE36B battery tool is approximately 13.25" long, 2.87" wide, and 4.5" deep, weighs 2.8 lb with the battery installed. Tool INClUDEs: Carrying Case, Two 18v Batteries (p/n HDE-LI-B), One Battery Charger (p/n HDE-LI-120C). DIE sElECTIoN: The HD36 crimper will accommodate all crimp dies listed on page 109. Other applications may be covered by this tool. Consult DMC for details. *Wire range will vary depending on wire and terminal/contact. FEATUREs Ergonomic design allows onehanded operation Die automatically opens when crimp is complete Die can be retracted in mid-cycle to adjust connector Head rotates 350 degrees Red LED to display the current status of the unit CRIMP CAPACITIES Max. Crimp Force: 4 Tons (35.6 kN) Avg. Crimp Time: 3 seconds Avg. Crimps per Charge: 100 SPECIFICATIONS Length: 13.25" (356 mm) Width: 2.87" (72.9 mm) Depth: 4.5" (114.3 mm) Weight (with battery): 2.8 lb (1.3 kg) Sound Level: 75 db(A) at 1 meter Vibration: <8.2 ft/s2 (2.5 m/s2) Hydraulic Oil: Shell Tellus T-15
PAGE 110
www.DMCTools.CoM
Electric Hydraulic 3.5 Ton Crimp Tool for HD36 Dies

a totally self-containeD portable crimp system for proDuction
The EHCD36 is a fast cycling benchtop crimp tool designed to be lightweight and rugged. The versatile features of the EHCD36 make this a good choice where production and quality cannot be compromised. This unit is small in overall size (10.0" H x 7.1" W x 19.1" L) and weighs approximately 27 pounds, but has ample die force power to do most jobs. The crimp cycle time is only two seconds. Powered by 110VAC with standard power cord. Other power & cord setups available. CoMPATIBIlITy wITH ExIsTING CRIMP DIEs The EHCD36 is designed to accept the entire family of D36 dies for crimping terminals, lugs or any other special applications. WIRE RANGE: #8 to #0 AWG* in many power applications, and .750 (19.05mm) in coaxial hexagonal crimping. This affords total utilization of existing dies and total interchangeability with HD36 hand tool frame and HDE36B battery powered hydraulic crimp tool. FUll CyClE CoNTRol Full die closure is assured on every crimp. The internal cycle control network will not allow the tool to open until complete closure is attained. The cycle control can be overridden with the Emergency Stop button. oPERAToR sAFETy FEATUREs An Emergency Stop button is located on top of the tool. Depressing this button releases the hydraulic pressure and allows the crimp dies to re-open. A Foot Pedal is Available (P/N EHCFP) When the foot pedal is plugged to the unit, it disables the front panel actuator. DIE sElECTIoN: The HD36 crimper will accommodate all crimp dies listed on page 109. Other applications may be covered by this tool. Consult DMC for details. *Wire range will vary depending on wire and terminal/contact.
www.DMCTools.CoM
PAGE 111
Hydrac Hydraulic 5.5 Ton Crimping Tool for HD51 Dies

HD51 Medium Duty Hydraulic Crimper is the most popular hand operated hydraulic crimper. The HD51 is still lightweight at 4.6 pounds, but the 5.5 tons of die force and the larger die configuration extends the range of crimping capabilities to 2/0 AWG* conductors in many applications. The HD51 Hydraulic Crimper utilizes rugged construction, lightweight materials, and comfortable handle grips for the best ergonomic advantage. The number of handle closures required to complete the crimp is reduced by the larger and more efficient hydraulic pump system. Other features are the following: Length: 14 inches (356 mm) Weight 4.6 pounds (2.08kg) Crimp force: 5.5 tons (48.93kN) Automatic relief valve to prevent over-compression Release lever for relaxing crimp pressure and opening dies 180 rotating head for ease in confined work areas. WIRE RANGE: (#12 to #2/0 AWG in many power applications, and .700 (17.78mm) in coaxial hexagonal crimping. xHD51 Remote Hydraulic Crimp Head is a preferred solution for high yield applications on production lines and maintenance rework centers. A pumping system provides the hydraulic power to the remote crimping head, and the crimp head can be mounted in a stationary position, or used as a hand-held tool. The recommended hydraulic pump is the versatile HPU11M air powered pump that is featured on page 116 of this catalog. Other specifications that apply to the XHD51 are the following: Length: 7.1 inches (180.3mm) Weight 3.85 pounds (1.74kg) Crimp force: 5.5 tons (48.93kN) DMC1383 Tool Kit contains the HD51 hand tool and all the dies for crimping insulated and uninsulated terminals and splices size 8 through 2/0. This tool kit is contained in a metal case with foam inserts that have contoured tool cavities, laminated instruction sheets permanently attached on a ring binder, and contents charts identifying the location of each tool. EHCD51 Contact DMC about Electric Hydraulic tooling for HD51 Dies. wIRE RANGE: #12 to #2/0 AWG in many power applications, and .700 (17.78mm) in coaxial hexagonal crimping.
HD51 Dies
*Wire range will vary depending on wire and terminal/contact.
xHD51
xHD51 remote HyDraulic crimp HeaD
HD51 meDium Duty HyDraulic crimper
PAGE 112
www.DMCTools.CoM
HeaderRight Dies Hydrac HD51 Subheadline

HD51 Tool SerieS DieS P/N HD51-101 HD51-105 HD51-106 HD51-107 HD51-110 HD51-112 HD51-113 HD51-114N HD51-115N HD51-116N HD51-117N HD51-118N HD51-119N HD51-120N HD51-121N HD51-122N HD51-123N HD51-124N HD51-125N HD51-127 HD51-128 HD51-129 HD51-130-1 HD51-131-2 HD51-132-2 HD51-133-2 HD51-134-2 HD51-138 HD51-139 HD51-140 HD51-144 HD51-148 HD51-149 HD51-150 HD51-152 HD51-154 HD51-157 HD51-159 HD51-160 HD51-162 .312 GAGE .500 HEX .218 .470 1.300 .470 "A" CAviTy .325 HEX .170 GAGE .202 GAGE .254 GAGE .530 HEX .440 HEX .312 GAGE .135 GAGE .176 GAGE .206 GAGE .265 GAGE .135 GAGE .176 GAGE .206 GAGE .265 GAGE .275 GAGE .275 GAGE .370 GAGE .370 GAGE .445 HEX .410 GAGE .404 GAGE R .100, H .300 R .275 R .219 .312 GAGE .202 GAGE .377 HEX .587 HEX .956 HEX .140 HEX .216 HEX .660 HEX .352 HEX .304 GAGE .339 GAGE .400 .470 .470 .437 .470 .435 .400 .500 HEX R .145 R .188 .170 GAGE .254 GAGE "A" leNgTH .125 .250 .312 .375 .365 .358 .470 .312 .312 .312 .312 .312 .312 .312 .312 .470 .470 .470 .470 .250 .470 .470 .395 HEX .200 .538 HEX .358 "B" CAviTy .216 HEX "B" leNgTH .187 APPliCATioN .325 / .216 Hexes #8 Insulated Terminals #6 Insulated Terminals #4 Insulated Terminals .530 Hex .440 / .538 Hexes #2 Insulated Terminals #8 Uninsulated Terminals #6 Uninsulated Terminals #4 Uninsulated Terminals #2 Uninsulated Terminals #8 Uninsulated Terminals #6 Uninsulated Terminals #4 Uninsulated Terminals #2 Uninsulated Terminals #1/0 Uninsulated Terminals #1/0 Uninsulated Terminals #2/0 Uninsulated Terminals #2/0 Uninsulated Terminals .445 / .395 Hexes #1/0 Insulated Terminals #2/0 Insulated Terminals #2 - #8 Uninsulated Needs HD51-131-2 or HD51-132-2 #2 & #8 Uninsulated Needs HD51-130-1 #4 & #6 Uninsulated Needs HD51-130-1 #2 & #8 Insulated Needs HD51-113-1 for #2 & HD51-105-1 for #8 #4 & #6 Insulated Needs HD51-106-1 for #6 & HD51-107-1 for #4 #2 Uninsulated .377 Hex MS90485-2 Equiv. .587 Hex .956 & .500 HEX .130 Hex .216 Hex .660 Hex AB Twinax Pin & Socket Contacts Packard Hughes .437 Ferrules MS25036 #1 MS23002-1 Equiv. #10 Flag Terminal #2 AWG Insulated #2 Uninsulated For Aluminum Wire .218 HEX Elongated Hex G726 Single (MALE) Single (FEMALE) Single (FEMALE) G744 G747 G745 G746 G801 (#2) (FEMALE) (FEMALE) MS90485-2 Equiv. G682 (#8) G683 (#6) G684 (#4) G854 G855 Single Single Single Single Double Double Double Double Single Double Double Single G801 G744 G745 G746 G747 G744 G745 G746 G747 G749 G749 G750 G750 G682 G683 G684 iNDeNTS gAge
www.DMCTools.CoM
PAGE 113
Hydrac Left Header Hydraulic 7 & 12 Ton Crimping Tools

Subheadline for HD002,
HH80C Heavy Duty Hydraulic Crimper delivers the die force necessary to crimp large conductors, but still in a hand operated hydraulic crimper. The HH80C produces 7 tons with the two stage pump that minimizes the number of handle closures needed to complete the crimp. The utilization of the HD002 (Ms23002), HD485 (Ms90485), and HD442 (Ms25442) dies extends the range of crimping capabilities to 2/0 AWG conductors in military/aerospace applications, and 750 MCM applications on commercial systems. (Verification available upon request. Contact/terminal samples required.) Boeing sT 2354 series Dies are also available from DMC. The HH80C Hydraulic Crimper is fitted with comfortable handle grips for the best ergonomic advantage. Other features are the following: Crimp force: 7.0 tons (62.28kN) Length: 24 inches (610 mm) Weight 13.0 pounds (5.9kg) Automatic relief valve to prevent overcompression Release lever for relaxing crimp pressure and opening dies 360 rotating head for ease in confined work areas. Advance closing to crimp position is achieved by rotating the handle.
HD485, and HD442 Dies (AS5259)
HH80C Heavy Duty HyDrauliC Crimper
TBHD1M Remote Hydraulic Crimp Head (Ms25441-1) exerts 12 tons of crimp force and accepts the HD002 (Ms23002), HD485 (Ms90485), HD442 (Ms25442) and Boeing sT 2354 Die combinations. In some cases the tool can be used as a hand-held crimper, but the tool weight (9.6 lbs) and force means mounting it in a stationary position with a bench mount (BM-2A) is the preferred mode of operation. The recommended hydraulic pump is the HPU11M air over hydraulic powered pump (see page 114) and consult DMC for other hydraulic pump options. Other Specifications that apply to the TBHD1M are the following: Crimp force: 12.0 tons (107kN) Length: 10.0 inches (254 mm) Width: 6.0 inches (152.4 mm) Weight: 9.6 pounds (6.9 kg)
HD002 DieS
HD442 DieS
mS5244-1 qualifieD to aS52591/1 (SHown witHout Safety Cage)
HD485 DieS
PAGE 114
www.DMCTools.CoM
mS23002* DieS & gageS for mS25036 inSulateD terminalS mil Die p/n * MS23002-8 MS23002-6 MS23002-4 MS23002-2 MS23002-1 MS23002-01 MS23002-02 MS23002-03 MS23002-04 DmC p/n HD002-8 HD002-6 HD002-4 HD002-2 HD002-1 HD002-01 HD002-02 HD002-03 HD002-04 CommentS For Insulated Size 8 For Insulated Size 6 For Insulated Size 4 For Insulated Size 2 For Insulated Size 1 For Insulated Size 1/0 For Insulated Size 2/0 For Insulated Size 3/0 For Insulated Size 4/0 mil gage p/n * MS23003-8 MS23003-6 MS23003-4 MS23003-2 MS23003-1 MS23003-01 MS23003-02 MS23003-03 MS23003-04 DmC gage p/n G723 G724 G725 G281 G726 G727 G728 G282 G729
DMC1948 Tool Kit contains the TBHD1M Crimp Tool, HPU11M Pump, Hose Assembly, and all the HD002 (MS23002) and HD485 (MS90485) dies for crimping insulated and uninsulated terminals and splices size 8 through 4/0. This tool kit is contained in a molded, high-density plastic case with foam inserts that have contoured tool cavities, laminated instruction sheets permanently attached on a ring binder, and contents charts identifying the location of each tool. DMC1966 Tool Kit contains the TBHD1M Crimp Tool, HPU11M Pump, Hose Assembly, and all the HD442 (MS25442) dies for crimping uninsulated aluminum terminals and splices size 8 through 4/0. This tool kit is contained in a molded, high-density plastic case with foam inserts that have contoured tool cavities, laminated instruction sheets permanently attached on a ring binder, and contents charts identifying the location of each tool. HPU11-PG In-Line Hydraulic Pressure Gauge is recommended for cycle control monitoring, when using Remote Crimp Heads. It installs into either end of the hydraulic line to monitor the hydraulic pressure. The gauge will indicate to the operator when the required hydraulic pressure is achieved.
mS90485* DieS & gageS for mS20659 uninSulateD terminalS mil Die p/n* MS90485-8 MS90485-6 MS90485-4 MS90485-2 MS90485-1 MS90485-01 MS90485-02 MS90485-03 MS90485-04 DmC p/n HD485-8 HD485-6 HD485-4 HD485-2 HD485-1 HD485-01 HD485-02 HD485-03 HD485-04 CommentS For Uninsulated Size 8 For Uninsulated Size 6 For Uninsulated Size 4 For Uninsulated Size 2 For Uninsulated Size 1 For Uninsulated Size 1/0 For Uninsulated Size 2/0 For Uninsulated Size 3/0 For Uninsulated Size 4/0 mil gage p/n * MS90486-8 MS90486-6 MS90486-4 MS90486-2 MS90486-1 MS90486-01 MS90486-02 MS90486-03 MS90486-04 DmC gage p/n G720 G721 G722 G833 G834 G835 G836 G837 G838
mS25442* DieS & gageS for aS70991 uninSulateD terminalS mil Die p/n * MS25442-8A MS25442-6A MS25442-4A MS25442-2A MS25442-1A MS25442-01A MS25442-02A MS25442-03A MS25442-04A DmC p/n HD442-8A HD442-6A HD442-4A HD442-2A HD442-1A HD442-01A HD442-02A HD442-03A HD442-04A CommentS For Uninsulated Size 8 For Uninsulated Size 6 For Uninsulated Size 4 For Uninsulated Size 2 For Uninsulated Size 1 For Uninsulated Size 1/0 For Uninsulated Size 2/0 For Uninsulated Size 3/0 For Uninsulated Size 4/0 mil gage p/n * MS25472-1 MS25472-2 MS25472-3 MS25472-4 MS25472-5 MS25472-6 MS25472-7 MS25472-8 MS25472-9 DmC gage p/n G1129 G1130 G1131 G1132 G1133 G1134 G1135 G1136 G1137
DeSCription Manual Hydraulic Tool (7 ton force) Remote Crimp Head (12 ton force) (Requires Air to Hydraulic Pump) Air to Hydraulic Pump Hose Assembly (6 Ft. Length) In-Line Pressure Gauge HH80C
part no.
mil Die p/n *
TBHD1M * HPU11M 12-4040 HPU11-PG
MS25441-1 *
MS25441-3*
*Qualified to AS5259/1 Large Gage Crimp Tool Specification
www.DMCTools.CoM
PAGE 115
HC134 Dieless Four Indent Crimper

Hpu11m air powereD HyDrauliC pump
HPU11M (MS25441-5) Air Powered Hydraulic Pump is the most economical and efficient way to provide controlled hydraulic pressure for XHD51 and TBHD1M remote crimp heads and similar applications. The use of lightweight materials and the latest air-over-hydraulic technology makes the HPU11M the best choice. The HPU11M has heavy duty hoses and couplings and is intended to be used with the 12-4040 hydraulic hose assembly. The specifications are the following: Maximum output pressure 10,000 PSI, can be reduced by reducing input air pressure. Hydraulic/air ratio is 100:1, input air pressure: 25125 psi (1.78.6 bar) Length: 13.6 inches Width: 6.20 inches Height: 8.21 Inches Weight: 18 pounds (8.2kg) (with hose and hydraulic fluid) Vertical or horizontal mounting Sound Level: 76db HPU11-PG In-Line Hydraulic Pressure Gauge is recommended for cycle control monitoring, when using Remote Crimp Heads. It installs into either end of the hydraulic line to monitor the hydraulic pressure. The gauge will indicate to the operator when the required hydraulic pressure is achieved.
HC134 DieleSS four inDent Crimper

HC134 Dieless Four-Indent Hydraulic Crimper is a four-indent crimper that can self adjust to the application. The tool provides a symmetrical four-sided crimp (at 90 intervals), and the crimp pressure against the resistance of the metal conductor assembly will cause the tool to crimp to a depth where there is metal to metal bottoming (gas tight crimp joint on aluminum and soft copper). Dies of a particular configuration are not needed. The HC134 produces 7 tons. The range of crimping capabilities starts with small conductors (around 14 inch in diameter) to 4/0 AWG conductors on copper, and 750 MCM applications on aluminum. Triangle indenter shape is standard. Optional indent designs are available. Consult DMC.
FEATURES Length: 24 inches (610 mm) Weight 13.0 pounds (5.9kg) Crimp force: 7.0 tons (62.28kN) Automatic relief valve to prevent over-compression Release lever for opening dies 360 rotating head for ease in confined work areas. Advance close by rotating handle.
DMC59 Utility Conductor Repair Kit (NSN 5180-01-220-1807) A complete repair and service kit for aluminum and soft copper conductor maintenance. This tool kit contains the HC134 Crimper and a range of splices and high performance terminals (all two bolt type for high vibration), in a rugged metal box.
PAGE 116
www.DMCTools.CoM
Wire Harness Tools

wire HarneSS Spoon
DMCs Wire Harness Spoon is used to assist in inserting new wires into existing wire harnesses. It helps thread new or repaired wires under tight cable ties, zip ties, string ties and cushion clamps. The plastic construction of the wire harness spoon reduces damage when inserting wires because it will not damage ties or adjacent wires. There is less chance of nicks or cuts than with a metallic wire harness spoon. It can also be used to isolate cable ties for safe cutting to prevent damage to wire insulation. The WHS-1 is Orange in color and .875 wide by 6 long.
part number MG-1000 CutS Cable tie SizeS 18 lb. to 250 lb. tool lengtH 5.80" tool wiDtH 1.67" DeSCription Short Handle Length with Pointed Nose for Small Hands and Tight Spaces Standard Handle Length with Pointed Nose for Tight Spaces Standard Handle Length with Rounded Nose for Standard Use
Cable tie removal toolS

Now you can quickly remove cable ties without damaging the wire harness. The safety guards on the tip of the MG cable tie removal tools slide behind the cable tie strap to prevent the sharp blades from contacting and damaging the bundled items. The ergonomic, cushion grip handles and scissor action produce a clean cut. Also use the MG series cable tie removal tools when repairing and retrofitting wire harnesses & hose assemblies, removing packaged items, prototyping & testing products, and many other factory and field uses. These cable tie removal tools provide a long life when cutting plastic, thin copper wire, and aluminum wire AWG 10 & smaller. Each tool is made of heat treated alloy steel with a Rockwell hardness range of 53-58Rc.
MG-1100
18 lb. to 250 lb.
6.49"
2.35"
MG-1200
18 lb. to 250 lb.
6.22"
2.63"
CUTTing Tip ViEw
www.DMCTools.CoM
PAGE 117
Terminal and Splice Crimp Die Tooling Options 26 to 10 AWG

toolS anD DieS for Crimping terminalS anD SpliCeS
DMC has several die configurations for crimping terminals and splices. AWG size is one determining factor, but each die configuration has a designated tool series. The hand tool is the basis of each tool series and suitable for the low volume of prototype or repair work. For higher volume production and intermediate/depot maintenance, a tool series might include pneumatic tools, hydraulic tools, battery hydraulic tools, or electric hydraulic tools. nOTE: If MIL Approval is required, QPL status should be verified. Consult DMC for current status.
26 to 10 AWg Tooling options* HX4 Tool SerieS oPTioNS for y-DieS HX3 Tool SerieS oPTioNS for X-DieS
Pneumatic Tool, p. 74
HX23
Hand Tools, p. 70 & 75
HX4 or UDT4 HXE4B
Hand Tools, p. 70 & 75
HX3 or UDT3
Battery Hydraulic Tool, p. 72
Electric/Hydraulic Tool, p. 76
EHCY
HXE4-R
Pneumatic Tool, p. 75
PHX3
gMT Tool SerieS oPTioNS
DCT Tool SerieS oPTioNS
Hand Tool, p. 102
GMTxxx
Hand Tool, p. 106
DCT4
GMTExxx-R
GMTEBxxx
DCTE4B
* Pneumatic or Hydraulic tool options preferred for 10-12 AWG Range.
PAGE 118
www.DMCTools.CoM
Terminal and Splice Crimp Tooling Options 8 to 4/0 AWG

toolS anD DieS for Crimping terminalS anD SpliCeS (ContinueD)
8 to 4/0 AWg Tooling options* HX4 Tool SerieS oPTioNS for y-DieS HD36 Tool SerieS oPTioNS
Hand Tool, p. 108
HD37
Hand Tool, p. 109 Pneumatic Tool, p. 74
HD36
HX23
HDE37B
EHCY
EHCD36
HDE36B
HD51 Tool SerieS oPTioNS**
Tool oPTioNS for HD002, HD485, & HD442 DieS **
Hand Tool, p. 112
HD51
Hand Tool, p. 114
HH80C
Pneumatic/Hydraulic Tool, p. 112
XHD51
Pneumatic/Hydraulic Tool, p. 114
TBHD1M
** Hydraulic pump, hose, and other accessories are shown elsewhere in the catalog.
wire Stripping for terminalS anD SpliCeS

Wire strip length and configuration is important to the success of a termination. Guidelines for particular components being terminated should be followed carefully. For additional information on stripping wire for terminals and splices, contact DMC.
StanDarDization
DMC has maintained a leadership role in military and commercial standards committees such as SAE, WHMA, EIA, UL/NEMA, and DoD organizations. The following tool selection charts represent the current leading standard components and tools. If questions or conflicts arise in the use of these charts, please notify DMC (407-855-6161, DMC@DMCTools.com).
www.DMCTools.CoM
PAGE 119
M7928/1-1 to -10, Sizes 26 to 24

TypE: Class 1 Insulated Terminals, Insulation Restricting inSUlATiOn: Nylon, UL 94V-2 TERminAl BOdy & SlEEVE: Copper, ASTM B-152 plATing: Nickel, QQ-N-290, or Tin, ASTM B-545 mAx TEmp RATing: 105 C
Similar Terminal Shown
Tool Selection guide*

TERMinal SPECS aWG WiRE SizE MM inSUlaTion DiaMETER in. (MM) SlEEvE ColoR TERMinal/SPliCE PaRT nUMBER 1 .026-.055 (0.66-1.40) Yellow w/ Black Stripe 2 M7928/13 4 5 6 7 #24 0.24 .031-.055 (0.79-1.40) Yellow w/ Blue Stripe M7928/18 9 10 HX4 SERiES Mil aPPRovED* Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die DMC Tool/DiE oPTionS HX3 SERiES Mil aPPRovED* X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die Mil aPPRovED* Tool M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 HX4 SERiES SinGlE CaviTY Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die HX4 SERiES MUlTi CaviTY Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die
#26
0.15
* If MIL Approval is required, QPL status should be verified. Consult DMC for current status.
Terminal manufacturers part numbers

TERMinal SPECS aWG SlEEvE ColoR TERMinal/SPliCE PaRT nUMBER 1 2 #26 Yellow w/ Black Stripe M7928/13 4 5 6 7 #24 Yellow w/ Blue Stripe M7928/18 9 10 ----------BURnDY ----------TERMinal ManUfaCTURERS TERMinal # HollinGSWoRTH MolEX --------------------PanDUiT ----------THoMaS&BETTS TYCo ElEC 53078 53049 53050 53051 53052 53053 53054 53055 53056 53057
NOTE: Component manufactures and OEM instructions shall take precedence over the information presented in these charts. Wire ranges are for reference only.
HX4 Tool SerieS oPTioNS for y-DieS

HX4 Hand Tools, p. 70 & 75 HXE4B, HXE4-R Battery Tools, p. 72 & 73 HX23 Pneumatic Tool, p. 74 EHCY Electric Hydraulic Tool, p. 76
HX3 Tool SerieS oPTioNS for X-DieS

HX3 Hand Tools, p. 70 & 75 PHX3 Pneumatic Tool, p. 75
PAGE 120
www.DMCTools.CoM
M7928/1-11 to -19, Size 22

TypE: Class 1 Insulated Terminals, Insulation Restricting inSUlATiOn: Nylon, UL 94V-2 TERminAl BOdy & SlEEVE: Copper, ASTM B-152 plATing: Copper, ASTM B-152 mAx TEmp RATing: 105 C Tool Selection guide*
TERMinal SPECS aWG WiRE SizE MM inSUlaTion DiaMETER in. (MM) SlEEvE ColoR TERMinal/SPliCE PaRT nUMBER 11 12 13 .038-.110 (0.97-2.79) Red w/ Green Stripe 14 M7928/115 16 17 18 19 HX4 SERiES Mil aPPRovED* Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die DMC Tool/DiE oPTionS HX3 SERiES Mil aPPRovED* X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die Mil aPPRovED* Tool M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 HX4 SERiES SinGlE CaviTY Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die HX4 SERiES MUlTi CaviTY Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die
#22
0.38

TERMinal SPECS aWG SlEEvE ColoR TERMinal/SPliCE PaRT nUMBER 11 12 13 Red w/ Green Stripe 14 M7928/115 16 17 18 19 ---------BURnDY ---------TERMinal ManUfaCTURERS TERMinal # HollinGSWoRTH MolEX ------------------PanDUiT ---------THoMaS&BETTS TYCo ElEC 52273 2-36149-3 51863-2 1-320551-2 2-36153-3 2-320571-3 2-320572-2 2-320573-1 2-328975-1
#22


www.DMCTools.CoM
PAGE 121
M7928/1-20 to -28, Size 20

TypE: Class 1 Insulated Terminals, Insulation Restricting inSUlATiOn: Nylon, UL 94V-2 TERminAl BOdy & SlEEVE: Copper, ASTM B-152 plATing: Nickel, QQ-N-290, or Tin, ASTM B-545 mAx TEmp RATing: 105 C Tool Selection guide*
TERMinal SPECS aWG WiRE SizE MM inSUlaTion DiaMETER in. (MM) SlEEvE ColoR TERMinal/SPliCE PaRT nUMBER 20 21 22 23 #20 0.60 .046-.110 (1.17-2.79) Red w/ Red Stripe M7928/124 25 26 27 28 HX4 SERiES Mil aPPRovED* Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die DMC Tool/DiE oPTionS HX3 SERiES Mil aPPRovED* X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die Mil aPPRovED* Tool M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 HX4 SERiES SinGlE CaviTY Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die HX4 SERiES MUlTi CaviTY Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die

TERMinal SPECS aWG SlEEvE ColoR TERMinal/SPliCE PaRT nUMBER 20 21 22 23 #20 Red w/ Red Stripe M7928/124 25 26 27 28 ---------BURnDY ---------TERMinal ManUfaCTURERS TERMinal # HollinGSWoRTH MolEX ------------------PanDUiT ---------THoMaS&BETTS TYCo ElEC 52273-1 2-36149-4 51863-3 1-320551-3 2-36153-4 2-320571-4 2-320572-3 2-320573-2 2-328975-2


PAGE 122
www.DMCTools.CoM
M7928/1-29 to -37, Size 18

TERMinal SPECS aWG WiRE SizE MM inSUlaTion DiaMETER in. (MM) SlEEvE ColoR TERMinal/SPliCE PaRT nUMBER 29 30 31 .056-.110 (1.42-2.79) Red w/ White Stripe 32 M7928/133 34 35 36 37 HX4 SERiES Mil aPPRovED* Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die DMC Tool/DiE oPTionS HX3 SERiES Mil aPPRovED* X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die Mil aPPRovED* Tool M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 HX4 SERiES SinGlE CaviTY Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die HX4 SERiES MUlTi CaviTY Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die
#18
0.96

TERMinal SPECS aWG SlEEvE ColoR TERMinal/SPliCE PaRT nUMBER 29 30 31 Red w/ White Stripe 32 M7928/133 34 35 36 37 ---------BURnDY ---------TERMinal ManUfaCTURERS TERMinal # HollinGSWoRTH MolEX ------------------PanDUiT ---------THoMaS&BETTS TYCo ElEC 52273-2 2-36149-5 51863-4 1-320551-4 2-36153-5 2-320571-5 2-320572-4 2-320573-3 2-328975-3
#18


www.DMCTools.CoM
PAGE 123
M7928/1-38 to -46, Size 16

TERMinal SPECS aWG WiRE SizE MM inSUlaTion DiaMETER in. (MM) SlEEvE ColoR TERMinal/SPliCE PaRT nUMBER 38 39 40 41 #16 1.42 .063-.130 (1.60-3.30) Blue w/ Blue Stripe M7928/142 43 44 45 46 HX4 SERiES Mil aPPRovED* Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die DMC Tool/DiE oPTionS HX3 SERiES Mil aPPRovED* X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die Mil aPPRovED* Tool M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 HX4 SERiES SinGlE CaviTY Y671 Die Y671 Die Y671 Die Y671 Die Y671 Die Y671 Die Y671 Die Y671 Die Y671 Die HX4 SERiES MUlTi CaviTY Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die

TERMinal SPECS aWG SlEEvE ColoR TERMinal/SPliCE PaRT nUMBER 38 39 40 41 #16 Blue w/ Blue Stripe M7928/142 43 44 45 46 ---------BURnDY ---------TERMinal ManUfaCTURERS TERMinal # HollinGSWoRTH MolEX ------------------PanDUiT ---------THoMaS&BETTS TYCo ElEC 52274 2-320561-3 51864-6 1-51864-0 51864-7 2-320563-3 2-320575-2 2-320564-1 2-328976-1


PAGE 124
www.DMCTools.CoM
M7928/1-47 to -55, Size 14

TERMinal SPECS aWG WiRE SizE MM inSUlaTion DiaMETER in. (MM) SlEEvE ColoR TERMinal/SPliCE PaRT nUMBER 47 48 49 .078-.130 (1.98-3.30) Blue w/ Green Stripe 50 M7928/151 52 53 54 55 HX4 SERiES Mil aPPRovED* Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die DMC Tool/DiE oPTionS HX3 SERiES Mil aPPRovED* X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die Mil aPPRovED* Tool M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 HX4 SERiES SinGlE CaviTY Y671 Die Y671 Die Y671 Die Y671 Die Y671 Die Y671 Die Y671 Die Y671 Die Y671 Die HX4 SERiES MUlTi CaviTY Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die
#14
2.15

TERMinal SPECS aWG SlEEvE ColoR TERMinal/SPliCE PaRT nUMBER 47 48 49 50 #14 Blue w/ Green Stripe M7928/151 52 53 54 55 ---------BURnDY ---------TERMinal ManUfaCTURERS TERMinal # HollinGSWoRTH MolEX ------------------PanDUiT ---------THoMaS&BETTS TYCo ElEC 52274-1 2-320561-4 51864-8 1-51864-1 51864-9 2-320563-4 2-320575-3 2-320564-2 2-328976-2


www.DMCTools.CoM
PAGE 125
M7928/1-56 to -62, Size 12

TERMinal SPECS aWG WiRE SizE MM inSUlaTion DiaMETER in. (MM) SlEEvE ColoR TERMinal/SPliCE PaRT nUMBER 56 57 .095-.200 (2.41-5.08) Yellow w/ Yellow Stripe 58 M7928/159 60 61 62 HX4 SERiES Mil aPPRovED* Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die DMC Tool/DiE oPTionS HX3 SERiES Mil aPPRovED* X515 Die X515 Die X515 Die X515 Die X515 Die X515 Die X515 Die HX4 SERiES SinGlE CaviTY Y670 Die Y670 Die Y670 Die Y670 Die Y670 Die Y670 Die Y670 Die
#12
3.37

TERMinal SPECS aWG SlEEvE ColoR TERMinal/SPliCE PaRT nUMBER 56 57 Yellow w/ Yellow Stripe 58 M7928/159 60 61 62 -------BURnDY -------TERMinal ManUfaCTURERS TERMinal # HollinGSWoRTH MolEX --------------PanDUiT -------THoMaS&BETTS TYCo ElEC 2-36161-5 2-320568-2 2-36161-3 2-320569-5 2-320576-2 2-320577-1 --
#12


PAGE 126
www.DMCTools.CoM
M7928/1-63 to -69, Size 10

TERMinal SPECS aWG WiRE SizE MM inSUlaTion DiaMETER in. (MM) SlEEvE ColoR TERMinal/SPliCE PaRT nUMBER 63 64 .119-.200 (3.02-5.08) Yellow w/ Brown Stripe) 65 M7928/166 67 68 69 HX4 SERiES Mil aPPRovED* Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die DMC Tool/DiE oPTionS HX3 SERiES Mil aPPRovED* X515 Die X515 Die X515 Die X515 Die X515 Die X515 Die X515 Die HX4 SERiES SinGlE CaviTY Y670 Die Y670 Die Y670 Die Y670 Die Y670 Die Y670 Die Y670 Die
#10
6.11

TERMinal SPECS aWG SlEEvE ColoR TERMinal/SPliCE PaRT nUMBER 63 64 Yellow w/ Brown Stripe) 65 M7928/166 67 68 69 -------BURnDY -------TERMinal ManUfaCTURERS TERMinal # HollinGSWoRTH MolEX --------------PanDUiT -------THoMaS&BETTS TYCo ElEC 2-36161-6 2-320568-3 2-36161-4 2-320569-6 2-320576-3 2-320577-2 --
#10


www.DMCTools.CoM
PAGE 127
M7928/4-101 to -110, Sizes 22 to 14

TypE: Class 1 Insulated Terminals, Radiation Resistant inSUlATiOn: Polyvinylidene flouride (PVF2) TERminAl BOdy & SlEEVE: Copper, ASTM B-152 plATing: Tin, ASTM B-545 mAx TEmp RATing: 150 C Tool Selection guide*
TERMinal SPECS aWG WiRE SizE MM inSUlaTion DiaMETER in. (MM) SlEEvE ColoR TERMinal/SPliCE PaRT nUMBER 101 102 #22-18 0.260.96 .140 (3.56) Red M7928/4103 104 105 106 107 #16-14 1.04 2.62 .170 (4.32) Blue M7928/4108 109 110 HX4 SERiES Mil aPPRovED* Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die DMC Tool/DiE oPTionS HX3 SERiES Mil aPPRovED* X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die Mil aPPRovED* Tool M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 HX4 SERiES SinGlE CaviTY Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y671 Die Y671 Die Y671 Die Y671 Die Y671 Die HX4 SERiES MUlTi CaviTY Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die

TERMinal SPECS aWG SlEEvE ColoR TERMinal/SPliCE PaRT nUMBER 101 102 #22-18 Red M7928/4103 104 105 106 107 #16-14 Blue M7928/4108 109 110 ----------BURnDY ----------TERMinal ManUfaCTURERS TERMinal # HollinGSWoRTH MolEX --------------------PanDUiT ----------THoMaS&BETTS TYCo ElEC 53406-1 53407-1 53409-1 53411-1 53412-1 53415-1 53416-1 53418-1 53420-1 53421-1


PAGE 128
www.DMCTools.CoM
M7928/4-111 to -114, Sizes 12 to 10

TyPe: Class 1 Insulated Terminals, Radiation Resistant INSulaTIoN: Polyvinylidene flouride (PVF2) TerMINal Body & Sleeve: Copper, ASTM B-152 PlaTING: Tin, ASTM B-545 Max TeMP raTING: 150 C Tool Selection Guide*
Terminal SpecS aWG Wire Size mm inSulaTion DiameTer in. (mm) Sleeve color Terminal/Splice parT number 111 #12-10 2.62 6.64 .230 (5.84) Yellow M7928/4112 113 114 HX4 SerieS mil approveD* Y501 Die Y501 Die Y501 Die Y501 Die X515 Die X515 Die X515 Die X515 Die Dmc Tool/Die opTionS mil approveD* Tool HX4 SerieS SinGle caviTy Y670 Die Y670 Die Y670 Die Y670 Die
Terminal Manufacturers Part Numbers

Terminal SpecS aWG Sleeve color Terminal/Splice parT number 111 #12-10 Yellow M7928/4112 113 114 ----burnDy ----Terminal manufacTurerS Terminal # HollinGSWorTH moleX --------panDuiT ----THomaS&beTTS Tyco elec 53423-1 53425-1 53427-1 53428-1
HX4 Tool SerieS opTionS for Y-DieS

HX3 Tool SerieS opTionS for X-DieS

www.DMCTools.CoM
PAGE 129
M7928/4-143 -10, Sizes 26 26 to M7928/1-1 to to -151, Sizesto 24 18

TyPe: Class 1 Insulated Terminals, Radiation Resistant INSulaTIoN: Polyvinylidene flouride (PVF2) TerMINal Body & Sleeve: Copper, ASTM B-152 PlaTING: Tin, ASTM B-545 Max TeMP raTING: 150 C Tool Selection Guide*
Terminal SpecS aWG Wire Size mm inSulaTion DiameTer in. (mm) Sleeve color Terminal/Splice parT number 143 144 #26-24 0.10 0.26 .082 (2.09) Yellow M7928/4145 146 147 148 #22-18 0.260.96 .125 (3.18) Red M7928/4149 150 151 HX4 SerieS mil approveD* Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Dmc Tool/Die opTionS HX3 SerieS mil approveD* X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die mil approveD* Tool M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 HX4 SerieS SinGle caviTy Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die HX4 SerieS mulTi caviTy Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die

Terminal SpecS aWG Sleeve color Terminal/Splice parT number 143 144 #26-24 Yellow M7928/4145 146 147 148 #22-18 Red M7928/4149 150 151 ---------burnDy ---------Terminal manufacTurerS Terminal # HollinGSWorTH moleX ------------------panDuiT ---------THomaS&beTTS Tyco elec 53400-1 53401-1 53402-1 53403-1 53404-1 53405-1 53408-1 53410-1 53413-1


PAGE 130
www.DMCTools.CoM
M7928/4-152 to -159, SizeS 16 to 10

TyPe: Class 1 Insulated Terminals, Radiation Resistant INSulaTIoN: Polyninylidene flouride (PVF2) TerMINal Body & Sleeve: Copper, ASTM B-152 PlaTING: Tin, ASTM B-545 Max TeMP raTING: 150 C Tool Selection Guide*
Terminal SpecS aWG Wire Size mm inSulaTion DiameTer in. (mm) Sleeve color Terminal/Splice parT number 152 #16-14 1.04 2.62 .150 (3.81) Blue M7928/4153 154 155 156 #12-10 2.62 6.64 .230 (5.84) Yellow M7928/4157 158 159 HX4 SerieS mil approveD* Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Dmc Tool/Die opTionS HX3 SerieS mil approveD* X511 Die X511 Die X511 Die X511 Die X515 Die X515 Die X515 Die X515 Die mil approveD* Tool M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 ----HX4 SerieS SinGle caviTy Y671 Die Y671 Die Y671 Die Y671 Die Y670 Die Y670 Die Y670 Die Y670 Die HX4 SerieS mulTi caviTy Y1060 Die Y1060 Die Y1060 Die Y1060 Die -----

Terminal SpecS aWG Sleeve color Terminal/Splice parT number 152 #16-14 Blue M7928/4153 154 155 156 #12-10 Yellow M7928/4157 158 159 --------burnDy --------Terminal manufacTurerS Terminal # HollinGSWorTH moleX ----------------panDuiT --------THomaS&beTTS Tyco elec 53414-1 53417-1 53419-1 53422-1 53424-1 53426-1 ---


www.DMCTools.CoM
PAGE 131
M7928/5-1 to -5, SizeS 26 to 10

TyPe: Class 1 Insulated Splices INSulaTIoN: Nylon, UL 94V-2 TerMINal Body & Sleeve: Copper, ASTM B-152 PlaTING: Nickel, QQ-N-290, or Tin, ASTM B-545 Max TeMP raTING: 105 C Tool Selection Guide*
Splice SpecS aWG Wire Size mm 0.120.24 0.160.65 0.260.96 1.042.62 2.626.64 inSulaTion DiameTer in. (mm) .082 (2.08) .100 (2.54) .125 (3.18) .150 (3.81) .220 (5.59) Sleeve color Yellow Natural Red Blue Yellow Terminal/Splice parT number M7928/5M7928/5M7928/5M7928/5M7928/51 2 3 4 5 Y527 Die Y527 Die Y539 Die Y539 Die Y501 Die HX4 SerieS mil approveD* M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 -Dmc Tool/Die opTionS mil approveD* Tool
Similar Splice Shown
#26-24 #24 -20 #22-18 #16-14 #12-10
Splice Manufacturers Part Numbers

Splice SpecS aWG #26-24 #24 -20 #22-18 #16-14 #12-10 Sleeve color Yellow Natural Red Blue Yellow Terminal/Splice parT number M7928/5M7928/5M7928/5M7928/5M7928/51 2 3 4 5 -----burnDy --B18 70BN B18 71BN B18 72BN HollinGSWorTH Splice manufacTurerS Splice # moleX -------WA-840 WB-841 WC-842 panDuiT -----THomaS&beTTS Tyco elec (raycHem) 323994 323975 320559 320562 320570

PAGE 132
www.DMCTools.CoM
M7928/6-1 to -5, SizeS 26 to 10

TyPe: Class 1 Insulated Splices, Radiation Resistant INSulaTIoN: Polyninyldene flouride (PVF2) [Natural Color] SPlIce Body & Sleeve: Copper, ASTM B-152 PlaTING: Tin, ASTM B-545 Max TeMP raTING: 105 C Tool Selection Guide*
Splice SpecS aWG Wire Size mm 0.120.24 0.160.65 0.260.96 1.042.62 2.626.64 inSulaTion DiameTer in. (mm) .082 (2.08) .100 (2.54) .125 (3.18) .150 (3.81) .220 (5.59) Sleeve color Yellow Stripe White Stripe Red Stripe Blue Stripe Yellow Stripe Terminal/Splice parT number M7928/6M7928/6M7928/6M7928/6M7928/61 2 3 4 5 Y527 Die Y527 Die Y539 Die Y539 Die Y501 Die HX4 SerieS mil approveD* M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 -Dmc Tool/Die opTionS mil approveD* Tool
#26-24 #24 -20 #22-18 #16-14 #12-10

Splice SpecS aWG #26-24 #24 -20 #22-18 #16-14 #12-10 Sleeve color Yellow Stripe White Stripe Red Stripe Blue Stripe Yellow Stripe Terminal/Splice parT number M7928/6M7928/6M7928/6M7928/6M7928/61 2 3 4 5 -----burnDy -----Splice manufacTurerS Splice # HollinGSWorTH moleX ----------panDuiT THomaS&beTTS -----Tyco elec (raycHem) 53546-1 53547-1 53548-1 53549-1 53550-1

PAGE 133
www.DMCTools.CoM
M7928/7-1 to -11, SizeS 22 to 14

TyPe: Class 1 Uninsulated Terminals, Ring Tongue INSulaTIoN: N/A TerMINal Body & Sleeve: Copper, ASTM B-152 PlaTING: Tin, ASTM B-545 Max TeMP raTING: 175 C Tool Selection Guide*
Terminal SpecS aWG Wire Size mm inSulaTion DiameTer in. (mm) Sleeve color Terminal/Splice parT number 1 2 #22-18 0.26-0.96 N/A N/A M7928/73 4 5 6 7 8 #16-14 1.04 - 2.62 N/A N/A M7928/79 10 11 HX4 SerieS mulTi caviTy (1 inDenT) Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die Dmc Tool/Die opTionS HX4 SerieS mulTi caviTy (2 inDenTS) Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die GmT SerieS Tool (1 inDenT) GMT277 GMT277 GMT277 GMT277 GMT277 GMT277 GMT277 GMT277 GMT277 GMT277 GMT277 GmT SerieS Tool (2 inDenTS) GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 DcT4 SerieS DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die

Terminal SpecS aWG Sleeve color Terminal/Splice parT number 1 2 #22-18 N/A M7928/73 4 5 6 7 8 #16-14 N/A M7928/79 10 11 -----------burnDy Terminal manufacTurerS Terminal # HollinGSWorTH R4103B R4104B R4262B R4264B R4114B R4115B R4121B R4123B R4125B R4126B R4119B moleX ----------------------panDuiT -----------THomaS&beTTS -------320093 ---Tyco elec
GmT Tool SerieS opTionS

GMTxxx Hand Tool, p. 102 GMTEBxxx Battery Tool, p. 104 GMTExxx-R Battery Tool, p. 105

DCT Tool SerieS opTionS

DCT4 Hand Tool, p. 106 DCTE4B Battery Tool, p. 106
PAGE 134
www.DMCTools.CoM
M81824/1-01 to -03, SizeS 26 to 12

TyPe: Class 1 Insulated Splices INSulaTIoN: Nylon, UL 94V-2 SPlIce Body & Sleeve: Copper, ASTM B-152 PlaTING: Nickel, QQ-N-290 or Tin, ASTM B-545 SealING MaTerIal: Modified Thermoplastic Max TeMP raTING: 105 C Tool Selection Guide*
Splice SpecS aWG Wire Size mm 0.15-0.61 0.39-1.34 0.95-3.37 mulTiple conDucTorS cma ranGe 304 - 1510 779 - 2680 1900 - 6755 Sleeve color Red Blue Yellow Terminal/Splice parT number M81824/1M81824/1M81824/101 02 03 GmT SerieS mil* approveD GMT232 GMT232 GMT232 Dmc Tool/Die opTionS HX4 SerieS mil* approveD Y540 Die Y540 Die Y539 Die HX3 SerieS mil approveD X528 Die X528 Die X527 Die HX4 SerieS Die Y516 Die Y516 Die Y516 Die
#26-20 #20-16 #16-12

Splice SpecS aWG #26-20 #20-16 #16-12 Sleeve color 0.15-0.61 0.39-1.34 0.95-3.37 Terminal/Splice parT number M81824/1M81824/1M81824/101 02 03 ---burnDy ---HollinGSWorTH Splice manufacTurerS Splice # moleX ---panDuiT ---THomaS & beTTS ---Tyco elec (raycHem) D-436-36 D-436-37 D-436-38 SumiTomo H-CR-436-36 H-CR-436-37 H-CR-436-38



www.DMCTools.CoM
PAGE 135
M81824/6-01 to -03, Sizes 26 to 12

TyPe: Class 1 Insulated Splices INSulaTIoN: Heat Shrinkable Polyvinylidene Flouride SPlIce Body & Sleeve: Copper, ASTM B-280 or B75-68 or B152 PlaTING: Tin, ASTM B-545 Max TeMP raTING: Modified Thermoplastic Max TeMP raTING: 150 C Tool Selection Guide*
Splice SpecS aWG Wire Size mm 0.15-0.61 0.39-1.34 0.95-3.37 mulTiple conDucTorS cma ranGe 304 - 1510 779 - 2680 1900 - 6755 Sleeve color Terminal/Splice parT number M81824/6M81824/6M81824/601 02 03 GmT SerieS mil* approveD GMT232 GMT232 GMT232 Dmc Tool/Die opTionS HX4 SerieS mil* approveD Y540 Die Y540 Die Y539 Die HX3 SerieS mil approveD X528 Die X528 Die X527 Die HX4 SerieS Die
#26-20 #20-16 #16-12
Red Blue Yellow
Y516 Die Y516 Die Y516 Die

Splice SpecS aWG #26-20 #20-16 #16-12 Sleeve color Red Blue Yellow Terminal/Splice parT number M81824/6M81824/6M81824/601 02 03 burnDy ------Splice manufacTurerS Splice # HollinGSWorTH ---moleX ---panDuiT THomaS & beTTS ---Tyco elec (raycHem) D-436-82 D-436-83 D-436-84 ---SumiTomo



PAGE 136
www.DMCTools.CoM
M81824/7-01 to -03, SizeS 26 to 12

TyPe: Class 1 Insulated Splices INSulaTIoN: Heat Shrinkable Polyvinylidene Flouride SPlIce Body & Sleeve: Copper, ASTM B-280 or B75-68 or B152 PlaTING: Tin, ASTM B-545 SealING MaTerIal: Modified Thermoplastic Max TeMP raTING: 150 C Tool Selection Guide*
Splice SpecS aWG Wire Size mm 0.15-0.61 0.39-1.34 0.95-3.37 mulTiple conDucTorS cma ranGe 304 - 1510 779 - 2680 1900 - 6755 Sleeve color Terminal/Splice parT number M81824/7M81824/7M81824/701 02 03 GmT SerieS mil* approveD GMT232 GMT232 GMT232 Dmc Tool/Die opTionS HX4 SerieS mil* approveD Y540 Die Y540 Die Y539 Die HX3 SerieS mil approveD X528 Die X528 Die X527 Die HX4 SerieS Die
#26-20 #20-16 #16-12
Red Blue Yellow




www.DMCTools.CoM
PAGE 137
M81824/8-01 to -03, SizeS 26 to 12

TyPe: Class 1 Insulated Splices INSulaTIoN: Heat Shrinkable Polyvinylidene Flouride SPlIce Body & Sleeve: Copper, ASTM B-280 or B75-68 or B152 PlaTING: Nickel, SAE AMS-QQ-N290 SealING MaTerIal: Modified Thermoplastic Max TeMP raTING: 175 C Tool Selection Guide*
Splice SpecS aWG Wire Size mm 0.15-0.61 0.39-1.34 0.95-3.37 mulTiple conDucTorS cma ranGe 304 - 1510 779 - 2680 1900 - 6755 Sleeve color Red Blue Yellow Terminal/Splice parT number M81824/8M81824/8M81824/801 02 03 GmT SerieS mil* approveD GMT232 GMT232 GMT232 Dmc Tool/Die opTionS HX4 SerieS mil* approveD Y540 Die Y540 Die Y539 Die HX3 SerieS mil approveD X528 Die X528 Die X527 Die HX4 SerieS Die
#26-20 #20-16 #16-12




PAGE 138
www.DMCTools.CoM
M81824/9-01 to -03, SizeS 26 to 12

TyPe: Class 1 Insulated Splices INSulaTIoN: Heat Shrinkable Polyvinylidene Flouride SPlIce Body & Sleeve: Copper, ASTM B-280 or B75-68 or B152 PlaTING: Tin, ASTM B-545 SealING MaTerIal: Modified Thermoplastic Max TeMP raTING: 150 C Tool Selection Guide*
Splice SpecS aWG Wire Size mm 0.15-0.61 0.39-1.34 0.95-3.37 mulTiple conDucTorS cma ranGe 304 - 1510 779 - 2680 1900 - 6755 Sleeve color Red Blue Yellow Terminal/Splice parT number M81824/9M81824/9M81824/901 02 03 GmT SerieS mil* approveD GMT232 GMT232 GMT232 Dmc Tool/Die opTionS HX4 SerieS mil* approveD Y540 Die Y540 Die Y539 Die HX3 SerieS mil approveD X528 Die X528 Die X527 Die HX4 SerieS Die Y516 Die Y516 Die Y516 Die
#26-20 #20-16 #16-12

Splice SpecS aWG #26-20 #20-16 #16-12 Sleeve color Red Blue Yellow Terminal/Splice parT number M81824/9M81824/9M81824/901 02 03 burnDy ------HollinGSWorTH ---Splice manufacTurerS Splice # moleX ---panDuiT THomaS & beTTS ---Tyco elec (raycHem) D-436-0115 D-436-42 D-436-43 ---SumiTomo



www.DMCTools.CoM
PAGE 139
M81824/10-01 to -03, SizeS 26 to 12

TyPe: Class 1 Insulated Splices INSulaTIoN: Heat Shrinkable Polyvinylidene Flouride SPlIce Body & Sleeve: Copper, ASTM B-280 or B75-68 or B152 PlaTING: Nickel, SAE AMS-QQ-N290 SealING MaTerIal: Modified Thermoplastic Max TeMP raTING: 175 C Tool Selection Guide*
Splice SpecS aWG Wire Size mm 0.15-0.61 0.39-1.34 0.95-3.37 mulTiple conDucTorS cma ranGe 304 - 1510 779 - 2680 1900 - 6755 Sleeve color Red Blue Yellow Terminal/Splice parT number M81824/10M81824/10M81824/1001 02 03 GmT SerieS mil* approveD GMT232 GMT232 GMT232 Dmc Tool/Die opTionS HX4 SerieS mil* approveD Y540 Die Y540 Die Y539 Die HX3 SerieS mil approveD X528 Die X528 Die X527 Die HX4 SerieS Die
#26-20 #20-16 #16-12

Splice SpecS aWG #26-20 #20-16 #16-12 Sleeve color Red Blue Yellow Terminal/Splice parT number M81824/10M81824/10M81824/1001 02 03 burnDy ------HollinGSWorTH ---Splice manufacTurerS Splice # moleX ---panDuiT THomaS & beTTS ---Tyco elec (raycHem) D-436-88 D-436-89 D-436-90 ---SumiTomo



PAGE 140
www.DMCTools.CoM
M81824/11-01 to -03, SizeS 26 to 12

TyPe: Class 1 Insulated Splices INSulaTIoN: Heat-Shrinkable Cross-Linked Polyvinylidene Flouride, (SAE
AMS-DTL-23053/18)
SPlIce Body & Sleeve: Copper, ASTM B-280, B-75, or B-187 PlaTING: Nickel, SAE AMS-QQ-N290 SealING MaTerIal: Modified Thermoplastic Max TeMP raTING: 200 C Tool Selection Guide*
Splice SpecS aWG Wire Size mm 0.15-0.61 0.39-1.34 0.95-3.37 mulTiple conDucTorS cma ranGe 304 - 1510 779 - 2680 1900 - 6755 Sleeve color Red Blue Yellow Terminal/Splice parT number M81824/11M81824/11M81824/1101 02 03 GmT SerieS mil* approveD GMT232 GMT232 GMT232
Dmc Tool/Die opTionS HX4 SerieS mil* approveD Y540 Die Y540 Die Y539 Die HX3 SerieS mil approveD X528 Die X528 Die X527 Die HX4 SerieS Die
#26-20 #20-16 #16-12

Splice SpecS aWG #26-20 #20-16 #16-12 Sleeve color Red Blue Yellow Terminal/Splice parT number M81824/11M81824/11M81824/1101 02 03 burnDy ------HollinGSWorTH ---Splice manufacTurerS Splice # moleX ---panDuiT THomaS & beTTS ---Tyco elec (raycHem) TBD TBD TBD ---SumiTomo



www.DMCTools.CoM
PAGE 141
M81824/12-01 to -03, SizeS 26 to 12

TyPe: Class 1 Splice, Environment Resistant, Heatless Sealing INSulaTIoN: Preformed Nylon with Colored End Cap, Gel Seal TerMINal Body & Sleeve: Copper PlaTING: Tin Coated SealING MaTerIal: Non-Opaque Gel Max TeMP raTING: C
Tool Selection Guide*

Splice SpecS aWG #26-20 #20-16 #14-12 ---Wire Size mm mulTiple conDucTorS cma ranGe ---enD cap color Red Blue Yellow Terminal/Splice parT number M81824/12M81824/12M81824/1201 02 03 Dmc Tool/Die opTionS GmT SerieS mil approveD* GMT1090 GMT1090 GMT1090 HX4 SerieS mil approveD* Y1090-1 Y1090-1 Y1090-2

Splice SpecS aWG #26-20 #20-16 #14-12 enD cap color Red Blue Yellow Terminal/Splice parT number M81824/12M81824/12M81824/1201 02 03 burnDy ------Splice manufacTurerS Splice # HollinGSWorTH ---moleX ---panDuiT THomaS & beTTS ---Tyco elec (raycHem) TBD TBD TBD ---SumiTomo


PAGE 142
www.DMCTools.CoM
HEADER to -10, Sizes 22 to 10 MS17143-1

SUbheaDeR
TyPe: Class 1 Insulated Terminals, Rectangular Tongue INSulaTIoN: Nylon, UL 94V-2 TerMINal Body & Sleeve: Copper, ASTM B-152 PlaTING: Tin, ASTM B-545 Max TeMP raTING: 105 C Tool Selection Guide*
Terminal SpecS aWG #22-18 #16-14 #12-10 #22-18 #16-14 #12-10 #22-18 #16-14 #12-10 #22-18 Wire Size mm 0.26-0.96 1.04 - 2.62 2.62 - 6.64 0.26-0.96 1.04 - 2.62 2.62 - 6.64 0.26-0.96 1.04 - 2.62 2.62 - 6.64 0.26-0.96 inSulaTion diameTer in. (mm) .140 (3.56) .170 (4.32) .230 (5.84) .140 (3.56) .170 (4.32) .230 (5.84) .140 (3.56) .170 (4.32) .230 (5.84) .140 (3.56) Sleeve color Red Blue Yellow Red Blue Yellow Red Blue Yellow Red Terminal/Splice parT number MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 1 2 3 4 5 6 7 8 9 10 Hx4 SerieS mil approved* Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die dmc Tool/die opTionS Hx3 SerieS mil approved* X511 Die X511 Die X515 Die X511 Die X511 Die X515 Die X511 Die X511 Die X515 Die X511 Die mil approved Tool* M22520/40-01 M22520/40-01 -M22520/40-01 M22520/40-01 -M22520/40-01 M22520/40-01 -M22520/40-01 Hx4 SerieS SinGle caviTy Y672 Die Y671 Die Y670 Die Y672 Die Y671 Die Y670 Die Y672 Die Y671 Die Y670 Die Y672 Die Hx4 SerieS mulTi caviTy Y1060 Die Y1060 Die -Y1060 Die Y1060 Die -Y1060 Die Y1060 Die -Y1060 Die

Terminal SpecS aWG #22-18 #16-14 #12-10 #22-18 #16-14 #12-10 #22-18 #16-14 #12-10 #22-18 Sleeve color Red Blue Yellow Red Blue Yellow Red Blue Yellow Red Terminal/Splice parT number MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 1 2 3 4 5 6 7 8 9 10 fci burndy ----------Terminal manufacTurerS Terminal # HollinGSWorTH ----------molex AA-880-1 BB-880-2 -AA-881-1 BB-881-2 -AA-882-1 BB-882-2 -AA-883-1 panduiT ----------THomaS&beTTS RA 480 RB 480 RC 480 RA 481 RB 481 RC 481 RA 482 RB 482 RC 482 RA 483 Tyco elec 327932 2-327934-2 327936 2-327938-1 2-327940-4 327942 327944 2-327946-4 327948 2-327950-1
NOTE: Component manufactures instructions shall take precedence over the information presented in these charts. Wire ranges are for reference only.


www.DMCTools.CoM
PAGE 143
MS17143-11 to -21, Sizes 22 to 10

TyPe: Class 1 Insulated Terminals, Rectangular Tongue INSulaTIoN: Nylon, UL 94V-2 TerMINal Body & Sleeve: Copper, ASTM B-152 PlaTING: Tin, ASTM B-545 Max TeMP raTING: 105 C
Tool Selection Guide*

Terminal SpecS aWG #16-14 #12-10 #22-18 #16-14 #12-10 #22-18 #16-14 #12-10 #22-18 #16-14 #12-10 Wire Size mm 1.04 - 2.62 2.62 - 6.64 0.26-0.96 1.04 - 2.62 2.62 - 6.64 0.26-0.96 1.04 - 2.62 2.62 - 6.64 0.26-0.96 1.04 - 2.62 2.62 - 6.64 inSulaTion diameTer in. (mm) .170 (4.32) .230 (5.84) .140 (3.56) .170 (4.32) .230 (5.84) .140 (3.56) .170 (4.32) .230 (5.84) .140 (3.56) .170 (4.32) .230 (5.84) Sleeve color Blue Yellow Red Blue Yellow Red Blue Yellow Red Blue Yellow Terminal/Splice parT number MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 11 12 13 14 15 16 17 18 19 20 21 Hx4 SerieS mil approved* Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die dmc Tool/die opTionS Hx3 SerieS mil approved* X511 Die X515 Die X511 Die X511 Die X515 Die X511 Die X511 Die X515 Die X511 Die X511 Die X515 Die mil approved Tool* M22520/40-01 -M22520/40-01 M22520/40-01 -M22520/40-01 M22520/40-01 -M22520/40-01 M22520/40-01 -Hx4 SerieS SinGle caviTy Y671 Die Y670 Die Y672 Die Y671 Die Y670 Die Y672 Die Y671 Die Y670 Die Y672 Die Y671 Die Y670 Die Hx4 SerieS mulTi caviTy Y1060 Die -Y1060 Die Y1060 Die -Y1060 Die Y1060 Die -Y1060 Die Y1060 Die --

Terminal SpecS aWG #16-14 #12-10 #22-18 #16-14 #12-10 #22-18 #16-14 #12-10 #22-18 #16-14 #12-10 Sleeve color Blue Yellow Red Blue Yellow Red Blue Yellow Red Blue Yellow Terminal/Splice parT number MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 MS 17143 11 12 13 14 15 16 17 18 19 20 21 -----------fci burndy -----------Terminal manufacTurerS Terminal # HollinGSWorTH molex BB-883-2 -AA-884-1 BB-884-2 -AA-885-1 BB-885-2 AA-886-1 BB-886-2 ------------panduiT THomaS&beTTS RB 483 RC 483 RA 484 RB 484 RC 484 RA 485 RB 485 RC 485 RA 486 RB 486 RC 486 Tyco elec 2-327952-2 327954 2-327956-1 2-327958-4 2-327960-1 327962 2-327964-4 327966 2-327968-1 2-327970-4 327972
NOTE: Component manufactures instructions shall take precedence over the information presented in these charts. Wire ranges are for reference only.


PAGE 144
www.DMCTools.CoM
MS20659-101 to -106, SizES 22 to 10
TyPe: Class 1 Uninsulated Terminals, Ring Tongue INSulaTIoN: None TerMINal Body & Sleeve: Copper, ASTM B-152 PlaTING: Tin, ASTM B-545 Max TeMP raTING: 175 C Tool Selection Guide*
Terminal SpecS aWG Wire Size mm 0.26-0.96 1.04 2.62 2.62 6.64 inSulaTion diameTer in. (mm) N/A Sleeve color N/A Terminal/Splice parT number MS20659101 102 103 104 105 106 Hx4 SerieS mulTi caviTy (1 indenT) Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die
dmc Tool/die opTionS Hx4 SerieS mulTi caviTy (2 indenTS) Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die GmT SerieS Tool (1 indenT) GMT277 GMT277 GMT277 GMT277 GMT277 GMT277 GmT SerieS Tool (2 indenTS) GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 dcT4 SerieS
#22-18
DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die
#16-14
N/A
N/A
MS20659-
#12-10
N/A
N/A
MS20659-

Terminal SpecS aWG #22-18 Sleeve color N/A Terminal/Splice parT number MS20659101 102 103 104 105 106 ----YAV10 YAV10-T2 burndy ----R3457B R3459B Terminal manufacTurerS Terminal # HollinGSWorTH molex ----C-328-10 C-330-56 ----P10-10R P10-56R panduiT THomaS&beTTS A85G A87G B85G B87G C26 C70 ----33457 33459 Tyco elec
#16-14
N/A
MS20659-
#12-10
N/A
MS20659-



www.DMCTools.CoM
PAGE 145
MS20659-107 toto -10, Sizes 26 M7928/1-1 -116, SizES 8 to 1
to 24
Terminal SpecS aWG Wire Size mm 6.64 - 10.5 inSulaTion diameTer in. (mm) N/A Sleeve color N/A Terminal/Splice parT number MS20659107 108 109 110 111 112 113 114 115 116 Hd485 dieS mil approved* HD485-8 Die HD485-8 Die HD485-6 Die HD485-6 Die HD485-4 Die HD485-4 Die HD485-2 Die HD485-2 Die HD485-1 Die HD485-1 Die
dmc Tool/die opTionS Hd51 SerieS HD51-118N Die HD51-118N Die HD51-119N Die HD51-119N Die HD51-120N Die HD51-120N Die HD51-121N Die HD51-121N Die --Hd36 SerieS HD36-111N Die HD36-111N Die HD36-112N Die HD36-112N Die HD36-113N Die HD36-113N Die HD36-114N Die HD36-114N Die ---
#8
#6
10.5 - 16.8
N/A
N/A
MS20659-
#4
16.8 - 26.7
N/A
N/A
MS20659-
#2
26.7 - 42.4
N/A
N/A
MS20659-
#1
40.0-42.0
N/A
N/A
MS20659-

Terminal SpecS aWG #8 Sleeve color N/A Terminal/Splice parT number MS20659107 108 109 110 111 112 113 114 115 116 burndy YAV8C-L YAV8C-L2 YAV6C-L YAV6C-L2 YAV4C-L YAV4C-L2 YAV2C-L1 YAV2C-L YAV1C-L1 YAV1C-L ----------Terminal manufacTurerS Terminal # HollinGSWorTH molex --------------------panduiT THomaS&beTTS D10361 D10721 E10711 E10731 F10711 F10731 G971 G973 H971 H973 ----------Tyco elec
#6
N/A
MS20659-
#4
N/A
MS20659-
#2
N/A
MS20659-
#1
N/A
MS20659-
HD485 Tool opTionS

HH80C Hand Tool, p. 114 TBHD1M Pneumatic Tool, p. 114
HD36 Tool SerieS opTionS

HD36 Hand Tool, p. 109 HDE36B Battery Tool, p. 110 EHCD36 Electric Hydraulic Tool, p. 111

HD51 Hand Tool, p. 112 XHD51 Pneumatic Tool, p. 112
PAGE 146
www.DMCTools.CoM
MS20659-117 to -124, SizES 1/0 to 4/0
Terminal SpecS aWG Wire Size mm 42.4-60.6 inSulaTion diameTer in. (mm) N/A N/A Sleeve color Terminal/Splice parT number MS20659117 118 119 120 121 122 123 124
dmc Tool/die opTionS Hd485 dieS mil approved* HD485-01 Die HD485-01 Die HD485-02 Die HD485-02 Die HD485-03 Die HD485-03 Die HD485-04 Die HD485-04 Die Hd51 SerieS HD51-123N Die HD51-123N Die HD51-124N Die HD51-124N Die -----
#1/0
#2/0
60.6-76.3
N/A
N/A
MS20659-
#3/0
76.3-96.3
N/A
N/A
MS20659-
#4/0
96.3-117
N/A
N/A
MS20659-

Terminal SpecS aWG #1/0 Sleeve color N/A Terminal/Splice parT number MS20659117 118 119 120 121 122 123 124 burndy YAV25-L1 YAV25-L YAV26-L2 YAV26-L YAV27-L YAV27-L1 YAV28-L YAV28-L12 --------Terminal manufacTurerS Terminal # HollinGSWorTH molex ----------------panduiT THomaS&beTTS J971 J973 K972 K973 L973 L975 M973 M975 --------Tyco elec
#2/0
N/A
MS20659-
#3/0
N/A
MS20659-
#4/0
N/A
MS20659-
HD485 Tool opTionS


www.DMCTools.CoM
PAGE 147
MS20659-125 to -128, SizES 22 to 10
Terminal SpecS aWG #22-18 #16-14 #12-10 Wire Size mm 0.26 - 0.96 1.04 - 2.62 2.62 - 6.64 inSulaTion diameTer in. (mm) N/A N/A N/A Sleeve color N/A N/A N/A Terminal/Splice parT number MS20659MS20659MS20659125 126 127 128 Hx4 SerieS mulTi caviTy (1 indenT) Y554 Die Y554 Die Y554 Die Y554 Die
dmc Tool/die opTionS Hx4 SerieS mulTi caviTy (2 indenTS) Y788 Die Y788 Die Y788 Die Y788 Die GmT SerieS Tool (1 indenT) GMT277 GMT277 GMT277 GMT277 GmT SerieS Tool (2 indenTS) GMT1005 GMT1005 GMT1005 GMT1005 dcT4 SerieS DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die

Terminal SpecS aWG #22-18 #16-14 #12-10 Sleeve color N/A N/A N/A Terminal/Splice parT number MS20659MS20659MS20659MS20659125 126 127 128 ---YAV10-T4 burndy ---R3220B Terminal manufacTurerS Terminal # HollinGSWorTH molex ---C-340-38 ---P10-38R panduiT ---C73 THomaS&beTTS ---33220 Tyco elec



PAGE 148
www.DMCTools.CoM
MS20659-129 to -134, SizES 6 to 1
Terminal SpecS aWG #8 #6 #4 #2 #1 Wire Size mm 6.64 - 10.5 10.5 - 16.8 16.8 -26.7 26.7 - 42.4 40.0-42.0 inSulaTion diameTer in. (mm) N/A N/A N/A N/A N/A Sleeve color N/A N/A N/A N/A N/A Terminal/Splice parT number MS20659MS20659MS20659MS20659MS20659129 130 131 132 133 134 Hd485 dieS mil approved* HD485-8 Die HD485-6 Die HD485-6 Die HD485-4 Die HD485-4 Die HD485-1 Die
dmc Tool/die opTionS Hd51 SerieS HD51-118N Die HD51-119N Die HD51-119N Die HD51-120N Die HD51-120N Die -Hd36 SerieS HD36-111N Die HD36-112N Die HD36-112N Die HD36-113N Die HD36-113N Die -Hx4 SerieS Y845HN Die Y847HN Die Y847HN Die ----

Terminal SpecS aWG #8 #6 #6 #4 #2 #1 Sleeve color N/A N/A N/A N/A N/A N/A Terminal/Splice parT number MS20659MS20659MS20659MS20659MS20659MS20659129 130 131 132 133 134 burndy YAV8C-L3 YAV6C-L1 YAV6C-L4 YAV4C-L4 YAV2C-L4 YAV1C-L4 ------Terminal manufacTurerS Terminal # HollinGSWorTH molex ------------panduiT THomaS&beTTS D10731 E10261 E10721 F10721 G975 H975 ------Tyco elec
HD485 Tool opTionS


HD37 Hand Tool, p. 108 HDE37B Battery Tool, p. 108 HX23 Pneumatic Tool, p. 74 EHCY Electric Hydraulic Tool, p. 76


www.DMCTools.CoM
PAGE 149
MS20659-135 to -137, SizES 1/0 to 4/0
Terminal SpecS aWG #1/0 #2/0 #4/0 Wire Size mm 42.4-60.6 60.6-76.3 96.3-117 inSulaTion diameTer in. (mm) N/A N/A N/A N/A N/A N/A Sleeve color Terminal/Splice parT number MS20659MS20659MS20659135 136 137
dmc Tool/die opTionS Hd485 dieS mil approved* HD485-01 Die HD485-02 Die HD485-04 Die Hd51 SerieS HD51-123N Die HD51-124N Die --

Terminal SpecS aWG #1/0 #2/0 #4/0 Sleeve color N/A N/A N/A Terminal/Splice parT number MS20659MS20659MS20659135 136 137 burndy YAV25-L3 YAV26-L3 YAV28-L54 ---Terminal manufacTurerS Terminal # HollinGSWorTH molex ------panduiT THomaS&beTTS J975 K975 ----Tyco elec
HD485 Tool opTionS


PAGE 150
www.DMCTools.CoM
MS20659-140 to -150, SizES 8 to 1
Terminal SpecS aWG Wire Size mm inSulaTion diameTer in. (mm) Sleeve color Terminal/Splice parT number 140 #8 6.64 - 10.5 N/A N/A MS20659141 142 #6 #4 10.5 - 16.8 16.8 -26.7 N/A N/A N/A N/A MS20659MS20659143 144 145 146 #2 26.7 - 42.4 N/A N/A MS20659147 148 #1 40.0-42.0 N/A N/A MS20659149 150 Hd485 dieS mil approved* HD485-8 Die HD485-8 Die HD485-8 Die HD485-6 Die HD485-4 Die HD485-4 Die HD485-2 Die HD485-2 Die HD485-2 Die HD485-1 Die HD485-1 Die
dmc Tool/die opTionS Hd51 SerieS HD51-118N Die HD51-118N Die HD51-118N Die HD51-119N Die HD51-120N Die HD51-120N Die HD51-121N Die HD51-121N Die HD51-121N Die --Hd36 SerieS HD36-111N Die HD36-111N Die HD36-111N Die HD36-112N Die HD36-113N Die HD36-113N Die HD36-114N Die HD36-114N Die HD36-114N Die --Hx4 SerieS Y845HN Die Y845HN Die Y845HN Die Y847HN Die --------

Terminal SpecS aWG Sleeve color Terminal/Splice parT number 140 #8 N/A MS20659141 142 #6 #4 N/A N/A MS20659MS20659143 144 145 146 #2 N/A MS20659147 148 #1 N/A MS20659149 150 burndy YAV8C-L14 YAV8C-L1 YAV8C-L4 YAV6C-L10 YAV4C-L3 YAV4C-L5 YAV2C-L3 YAV2C-L2 YAV2C-L11 YAV1C-L2 YAV1C-L4 -----------Terminal manufacTurerS Terminal # HollinGSWorTH molex ----------------------panduiT THomaS&beTTS D10161 D10711 --F10261 -G926 G972 G974 H972 H974 -----------Tyco elec
HD485 Tool opTionS


HD37 Hand Tool, p. 108 HDE37B Battery Tool, p. 108 HX23 Pneumatic Tool, p. 74 EHCY Electric Hydraulic Tool, p. 76


www.DMCTools.CoM
PAGE 151
MS20659-151 to -160, SizES 1/0 to 4/0
Terminal SpecS aWG 1/0 Wire Size mm 42.4-60.6 inSulaTion diameTer in. (mm) N/A N/A Sleeve color Terminal/Splice parT number MS20659151 152 153 154 155 156 157 4/0 96.3-117 N/A N/A MS20659158 159 160
dmc Tool/die opTionS Hd485 dieS mil approved* HD485-01 Die HD485-01 Die HD485-02 Die HD485-02 Die HD485-03 Die HD485-03 Die HD485-04 Die HD485-04 Die HD485-04 Die HD485-04 Die Hd51 SerieS HD51-123N Die HD51-123N Die HD51-124N Die HD51-124N Die -------
2/0
60.6-76.3
N/A
N/A
MS20659-
3/0
76.3-96.3
N/A
N/A
MS20659-

Terminal SpecS aWG 1/0 Sleeve color N/A Terminal/Splice parT number MS20659151 152 153 154 155 156 157 4/0 N/A MS20659158 159 160 burndy YAV25-L2 YAV25-L16 YAV26-L1 YAV26-L16 YAV27-L20 YAV27-L18 YAV1C-L11 YAV28-L56 YAV28-L13 YAV28-L14 ----------Terminal manufacTurerS Terminal # HollinGSWorTH molex --------------------panduiT THomaS&beTTS J972 J974 K971 K974 L972 L974 M972 M974 ------------Tyco elec
2/0
N/A
MS20659-
3/0
N/A
MS20659-
HD485 Tool opTionS


PAGE 152
www.DMCTools.CoM
MS20659-161 to -166, SizES 22 to 10
Terminal SpecS aWG Wire Size mm 0.26 - 0.96 inSulaTion diameTer in. (mm) N/A Sleeve color N/A Terminal/Splice parT number MS20659161 162 163 164 165 166 Hx4 SerieS mulTi caviTy (1 indenT) Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die
dmc Tool/die opTionS Hx4 SerieS mulTi caviTy (2 indenTS) Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die GmT SerieS Tool (1 indenT) GMT277 GMT277 GMT277 GMT277 GMT277 GMT277 GmT SerieS Tool (2 indenTS) GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 dcT4 SerieS DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die
#22-18
#16-14
1.04 - 2.62
N/A
N/A
MS20659-
#12-10
2.62 - 6.64
N/A
N/A
MS20659-

Terminal SpecS aWG #22-18 Sleeve color N/A Terminal/Splice parT number MS20659161 162 163 164 165 166 ----YAV10-T7 -burndy ----R3453B R3223B Terminal manufacTurerS Terminal # HollinGSWorTH molex ----------P10-6R -panduiT ----C33 C75 THomaS&beTTS ------Tyco elec
#16-14
N/A
MS20659-
#12-10
N/A
MS20659-



www.DMCTools.CoM
PAGE 153
MS21004-1 to -7, SizES 22 to 18
TyPe: Class 1 Uninsulated Terminals, Rectangular Tongue INSulaTIoN: None TerMINal Body & Sleeve: Copper, ASTM B-152 PlaTING: Tin, ASTM B-545 Max TeMP raTING: 175 C Tool Selection Guide*
Terminal SpecS aWG Wire Size mm inSulaTion diameTer in. (mm) Sleeve color Terminal/Splice parT number 1 2 3 #22-18 0.26-0.96 N/A N/A MS210044 5 6 7 Hx4 SerieS mulTi caviTy (1 indenT) Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die
dmc Tool/die opTionS Hx4 SerieS mulTi caviTy (2 indenTS) Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die GmT SerieS Tool (1 indenT) GMT277 GMT277 GMT277 GMT277 GMT277 GMT277 GMT277 GmT SerieS Tool (2 indenTS) GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 dcT4 SerieS DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die

Terminal SpecS aWG Sleeve color Terminal/Splice parT number 1 2 3 #22-18 N/A MS210044 5 6 7 -------burndy -------Terminal manufacTurerS Terminal # HollinGSWorTH molex --------------panduiT THomaS&beTTS A486 A483 A482 A481 A485 A484 A480 -------Tyco elec



PAGE 154
www.DMCTools.CoM
MS21004-8 to -14, SizES 16 to 14
Terminal SpecS aWG Wire Size mm inSulaTion diameTer in. (mm) Sleeve color Terminal/Splice parT number 8 9 10 #16-14 1.04 2.62 N/A N/A MS2100411 12 13 14 Hx4 SerieS mulTi caviTy (1 indenT) Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die Hx4 SerieS mulTi caviTy (2 indenTS) Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die
dmc Tool/die opTionS GmT SerieS Tool (1 indenT) GMT277 GMT277 GMT277 GMT277 GMT277 GMT277 GMT277 GmT SerieS Tool (2 indenTS) GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 dcT4 SerieS DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die

Terminal SpecS aWG Sleeve color Terminal/Splice parT number 8 9 10 #16-14 N/A MS2100411 12 13 14 -------burndy -------Terminal manufacTurerS Terminal # HollinGSWorTH molex --------------panduiT THomaS&beTTS B486 B483 B482 B481 B485 B484 B480 -------Tyco elec



www.DMCTools.CoM
PAGE 155
MS21004-15 to -21, SizES 12 to 10
Terminal SpecS aWG Wire Size mm inSulaTion diameTer in. (mm) Sleeve color Terminal/Splice parT number 15 16 17 #1210 2.62 6.64 N/A N/A MS2100418 19 20 21 Hx4 SerieS mulTi caviTy (1 indenT) Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die Y554 Die Hx4 SerieS mulTi caviTy (2 indenTS) Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die Y788 Die
dmc Tool/die opTionS GmT SerieS Tool (1 indenT) GMT277 GMT277 GMT277 GMT277 GMT277 GMT277 GMT277 GmT SerieS Tool (2 indenTS) GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 GMT1005 dcT4 SerieS DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die DCT4-105D Die

Terminal SpecS aWG Sleeve color Terminal/Splice parT number 15 16 17 #12-10 N/A MS2100418 19 20 21 -------burndy -------Terminal manufacTurerS Terminal # HollinGSWorTH molex --------------panduiT THomaS&beTTS C486 C483 C482 C481 C485 C484 C480 -------Tyco elec



PAGE 156
www.DMCTools.CoM
MS25036-101 to -110, SizES 22 to 14
TyPe: Class 1 Insulated Terminals INSulaTIoN: Nylon, UL 94V-2 TerMINal Body & Sleeve: Copper, ASTM B-152 PlaTING: Tin, ASTM B-545 Max TeMP raTING: 105 C Tool Selection Guide*
Terminal SpecS aWG Wire Size mm inSulaTion diameTer in. (mm) Sleeve color Terminal/Splice parT number 101 102 #22-18 0.260.96 .140 (3.56) Red MS25036103 104 105 106 107 #16-14 1.04 2.62 .170 (4.32) Blue MS25036108 109 110 Hx4 SerieS mil approved* Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die
dmc Tool/die opTionS Hx3 SerieS mil approved* X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die mil approved* Tool M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 Hx4 SerieS SinGle caviTy Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y671 Die Y671 Die Y671 Die Y671 Die Y671 Die Hx4 SerieS mulTi caviTy Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die

Terminal SpecS aWG Sleeve color Terminal/Splice parT number 101 102 #22-18 Red MS25036103 104 105 106 107 #16-14 Blue MS25036108 109 110 burndy YAES18-N1 YAES18-N2 YAES18-N3 YAES18-N4 YAES18-N5 YAES14-N6 YAES14-N7 YAES14-N8 YAES14-N9 YAES14-N10 HollinGSWorTH XR1881 SN XR1885 SN XR1891 SN XR1895 SN XR1896 SN XR2442 SN XR1901 SN XR1903 SN XR1907 SN XR1908 SN Terminal manufacTurerS Terminal # molex AA-820-06 AA-832-06 AA-821-10 AA-822-56 AA-826-38 BB-823-06 BB-837-06 BB-837-10 BB-825-56 BB-818-38 panduiT PN18-6RN PN18-6R PN18-10R PN18-56R PN18-38R PN14-6RN PN14-6R PN14-10R PN14-56R PN14-38R THomaS&beTTS RA333 RA853 RA873 RA723 RA733 RB1333 RB853 RB873 RB723 RB733 36150 51863 36154 31895 31897 320561 51864 51864-2 320575 320564 Tyco elec 36149 -36153 320572 320573 ------


www.DMCTools.CoM
PAGE 157
MS25036-111 to -114, SizES 12 to 10
TyPe: Class 1 Insulated Terminals INSulaTIoN: Nylon, UL 94V-2 TerMINal Body & Sleeve: Copper, ASTM B-152 PlaTING: Tin, ASTM B-545 Max TeMP raTING: 105 C Tool Selection Guide*
Terminal SpecS aWG Wire Size mm inSulaTion diameTer in. (mm) Sleeve color Terminal/Splice parT number 111 #12-10 2.62 - 6.64 .230 (5.84) Yellow MS25036112 113 114 Hx4 SerieS mil approved* Y501 Die Y501 Die Y501 Die Y501 Die
dmc Tool/die opTionS Hx3 SerieS mil approved* X515 Die X515 Die X515 Die X515 Die Hx4 SerieS SinGle caviTy Y670 Die Y670 Die Y670 Die Y670 Die

Terminal SpecS aWG Sleeve color Terminal/Splice parT number 111 #12-10 Yellow MS25036112 113 114 burndy YAES10-N11 YAES10-N12 YAES10-N13 YAES10-N14 HollinGSWorTH XR5107 N XR5109 N XR5111 N XR5112 N Terminal manufacTurerS Terminal # molex C-828-06 C-828-10 C-830-56 C-840-38 panduiT PN10-6R PN10-10R PN10-56R PN10-38R THomaS&beTTS RC333 RC363 RC703 RC733 320567 36161 320576 320577 Tyco elec 35107 35109 35111 35112


PAGE 158
www.DMCTools.CoM
MS25036-115 to -122, SizES 8 to 6
HEADER
SUbheaDeR
Type: Class 1 Insulated Terminals InsulaTIon: Nylon, UL 94V-2 TermInal Body & sleeve: Copper, ASTM B-152 plaTIng: Tin, ASTM B-545 max Temp raTIng: 105 C Tool selection guide*
Terminal SpecS aWG Wire Size mm inSulaTion DiameTer in. (mm) Sleeve color Terminal/Splice parT number 115 #8 6.64 - 10.5 .290 (7.55) Red MS25036116 117 118 119 #6 10.5 - 16.8 .370 (9.55) Blue MS25036120 121 122 HD002 DieS mil approveD* HD002-8 Die HD002-8 Die HD002-8 Die HD002-8 Die HD002-6 Die HD002-6 Die HD002-6 Die HD002-6 Die
Dmc Tool/Die opTionS HX4 SerieS Y673H Die Y673H Die Y673H Die Y673H Die Y674H Die Y674H Die Y674H Die Y674H Die HD36 SerieS HD36-139 Die HD36-139 Die HD36-139 Die HD36-139 Die HD36-136 Die HD36-136 Die HD36-136 Die HD36-136 Die HD51 SerieS HD51-105 Die HD51-105 Die HD51-105 Die HD51-105 Die HD51-106 Die HD51-106 Die HD51-106 Die HD51-106 Die

Terminal SpecS aWG Sleeve color Terminal/Splice parT number 115 #8 Red MS25036116 117 118 119 #6 Blue MS25036120 121 122 burnDy YAEV8C-L YAEV8C-L1 YAEV8C-L2 YAEV8C-L3 YAEV6C-L1-M YAEV6C-L-M YAEV6C-L4-M YAEV6C-L2-M --------Terminal manufacTurerS Terminal # HollinGSWorTH moleX ----------------panDuiT THomaS&beTTS RD10361 RD10711 RD10721 RD10731 RE10261 RE10711 RE10721 RE10731 --------Tyco elec
HD002 Tool opTionS

Hx4 Tool SerieS opTionS for y-DieS

HD37 Hand Tool, p. 108 HDE37B Battery Tool, p. 108 HX23 Pneumatic Tool, p. 74

HD36 Hand Tool, p. 109 HDE36B Battery Tool, p. 110

EHCY Electric Hydraulic Tool, p. 76 EHCD36 Electric Hydraulic Tool, p. 111
www.DMCTools.CoM
PAGE 159
MS25036-123 to -131, SizES 4 to 1
HEADER
SUbheaDeR
Terminal SpecS aWG Wire Size mm inSulaTion DiameTer in. (mm) Sleeve color Terminal/Splice parT number 123 #4 16.8 - 26.7 .430 (11.05) Yellow MS25036124 125 126 #2 26.7 - 42.4 .505 (12.83) Red MS25036127 128 129 #1 --White MS25036130 131 HD002 DieS mil approveD* HD002-4 Die HD002-4 Die HD002-4 Die HD002-2 Die HD002-2 Die HD002-2 Die HD002-1 Die HD002-1 Die HD002-1 Die
Dmc Tool/Die opTionS HD36 SerieS HD36-137 Die HD36-137 Die HD36-137 Die ------HD51 SerieS HD51-107 Die HD51-107 Die HD51-107 Die HD51-113 Die HD51-113 Die HD51-113 Die HD51-154 Die HD51-154 Die HD51-154 Die

Terminal SpecS aWG Sleeve color Terminal/Splice parT number 123 #4 Yellow MS25036124 125 126 #2 Red MS25036127 128 129 #1 White MS25036130 131 burnDy YAEV4C-L YAEV4C-L4 YAEV4C-L2 YAEV2C-L1 YAEV2C-L YAEV8C-L4 YAEV1C-L1 YAEV1C-L YAEV1C-L3 ---------Terminal manufacTurerS Terminal # HollinGSWorTH moleX ------------------panDuiT THomaS&beTTS RF10711 RF10721 RF10731 RG9711 RG9731 RG9751 RH9711 RH9731 RH9751 ---------Tyco elec
HD002 Tool opTionS



PAGE 160
www.DMCTools.CoM
MS25036-132 to -141, Sizes 1/0 to 4/0

Terminal SpecS aWG Wire Size mm 42.460.6 inSulaTion DiameTer in. (mm) Sleeve color Terminal/Splice parT number 132 1/0 .632 (16.05) Blue MS25036133 134 135 2/0 60.676.3 76.396.3 96.3-117 .684 (17.37) Yellow MS25036136 137 3/0 .737 (18.72) Red MS25036138 139 140 141 HD002 DieS mil approveD* HD002-01 Die HD002-01 Die HD002-01 Die HD002-02 Die HD002-02 Die HD002-02 Die HD002-03 Die HD002-03 Die HD002-04 Die HD002-04 Die HD51-128 Die HD51-128 Die HD51-128 Die HD51-129 Die HD51-129 Die HD51-129 Die ----Dmc Tool/Die opTionS HD51 SerieS
4/0
.799 (20.29)
Blue
MS25036-

Terminal SpecS aWG Sleeve color Terminal/Splice parT number 132 1/0 Blue MS25036133 134 135 2/0 Yellow MS25036136 137 3/0 Red MS25036138 139 140 141 burnDy YAEV25-L1 YAEV25-L YAEV25-L3 YAEV26-L2 YAEV26-L YAEV26-L3 --------------Terminal manufacTurerS Terminal # HollinGSWorTH moleX --------------------panDuiT THomaS&beTTS RJ9711 RJ9731 RJ9751 RK9711 RK9731 RK9751 RL9731 RL9751 RM9731 RM9751 ----------Tyco elec
4/0
Blue
MS25036-
HD002 Tool opTionS


www.DMCTools.CoM
PAGE 161
MS25036-143 to -151, Sizes 26 to 18

Terminal SpecS aWG Wire Size mm inSulaTion DiameTer in. (mm) Sleeve color Terminal/Splice parT number 143 144 #26-24 0.12 0.24 .082 (2.09) Yellow MS25036145 146 147 148 #22-18 0.260.96 .125 (3.18) Red MS25036149 150 151 HX4 SerieS mil approveD* Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Dmc Tool/Die opTionS HX3 SerieS mil approveD* X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die X511 Die mil approveD* Tool M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 HX4 SerieS SinGle caviTy Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die Y672 Die HX4 SerieS mulTi caviTy Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die Y1060 Die

Terminal SpecS aWG Sleeve color Terminal/Splice parT number 143 144 #26-24 Yellow MS25036145 146 147 148 #22-18 Red MS25036149 150 151 -----YAES18-N48 YAES18-N49 YAES18-N50 -burnDy Terminal manufacTurerS Terminal # HollinGSWorTH XR26336 N XR26337 N XR26338 N XR26339 N XR26340 N XR1880 SN XR1890 SN XR1894 SN ------AA-820-04 AA-821-08 AA-822-14 -moleX -----PN18-4RN PN18-8R PN18-14R -panDuiT THomaS&beTTS RAX23 RAX43 RAX63 RAX83 RAX103 RA323 RA863 RA713 RA753 Tyco elec 54310-1 52189 53073 54311-1 54321-1 31880 31890 31894 328975

Hx3 Tool SerieS opTionS for x-DieS

PAGE 162
www.DMCTools.CoM
MS25036-152 to -159, Sizes 22 to 10

Terminal SpecS aWG Wire Size mm inSulaTion DiameTer in. (mm) Sleeve color Terminal/Splice parT number 152 #16-14 1.04 2.62 .150 (3.81) Blue MS25036153 154 155 156 #12-10 2.62 6.64 0.260.96 .230 (5.84) Yellow MS25036157 158 #22-18 .230 (5.84) Red MS25036159 HX4 SerieS mil approveD* Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Y501 Die Dmc Tool/Die opTionS HX3 SerieS mil approveD* X511 Die X511 Die X511 Die X511 Die X515 Die X515 Die X515 Die X511 Die mil approveD* Tool M22520/40-01 M22520/40-01 M22520/40-01 M22520/40-01 ---M22520/40-01 HX4 SerieS SinGle caviTy Y671 Die Y671 Die Y671 Die Y671 Die Y670 Die Y670 Die Y670 Die Y672 Die HX4 SerieS mulTi caviTy Y1060 Die Y1060 Die Y1060 Die Y1060 Die ---Y1060 Die

Terminal SpecS aWG Sleeve color Terminal/Splice parT number 152 #16-14 Blue MS25036153 154 155 156 #12-10 Yellow MS25036157 158 #22-18 Red MS25036159 burnDy YAES14N52 YAES14N53 YAES14N54 YAES14N55 YAES10-N56 YAES10-N57 YAES10-N58 --XR1902 SN XR1906 SN -XR5108 N XR5110 N XR5117 N XR1879 SN Terminal manufacTurerS Terminal # HollinGSWorTH moleX BB-823-04 BB-837-08 BB-825-14 -C-828-08 C-830-14 -AA-820-02 panDuiT PN14-4R PN14-8R PN14-14R -PN10-8R PN10-14R --THomaS&beTTS RB1323 RB863 RB713 RB753 RC863 RC713 RC753 -Tyco elec 324159 51864-1 320563 328976 35108 35110 52077 --

Hx3 Tool SerieS opTionS for x-DieS

www.DMCTools.CoM
PAGE 163
Hand Held Pneumatic Wire Stripping Tool

Compact Design allows hand-held tool to be used in confined areas. Light Weight construction and pneumatic actuation system minimize operator fatigue and carpal tunnel injuries. Fast, smooth stripping operation results in maximum quality wire preparation at a production rate unattainable with hand operated mechanical strippers. Compatibility with common, commercially available stripper blades (see page ___), grippers, and other components makes the unit economical, and it assured a wide range of applications with all types of wire. Rotatable Head permits left or right hand operation. Wire Stop may be used for precise, repeatable operations. Adjustable Speed Control allows the operator to regulate the speed of the stripping operation by simply rotating the adjustment collar which is a part of the air hose. This enables greater accuracy and control of the wire stripper. The WSP-1630 series Pneumatic Wire Stripper is the ultimate combination of performance, reliability, and portability. It was developed in cooperation with major aerospace contractors addressing their needs for a reliable, simple to operate pneumatic wire stripper utilizing the blades and accessories which are certified and inventoried within their existing facilities. The WSP-1630 part number applies to the basic pneumatic wire stripper frame with WL5211 blades (less accessories), which accommodates most size 16 AWG and smaller wires. Blades, pads and accessories to cover a variety of wire types and sizes are available (see page ___). Consult DMC for designated part numbers for wire strippers with blades, pads and alternate components. Please contact DMC for specific details about this and other wire stripping products.
ROTATABLE HEAD
ADJUSTABLE SPEED CONTROL
ADJUSTABLE WiRE STOP (OPTiON)
PAGE 164
www.DMCTools.CoM
AS5768 Wire Stripper Info

The Industry standard for wire strippers (AS5768, Tool, Stripper, Electrical Insulation, General Specification For) was developed to organize, define, and provide QPL source management for wire strippers and blades used in Aerospace and Commercial applications. The AS5768 Specification is available from www.SAE.org.
AS5768 WiRE STRiPPER BLADE PART NUmBER TABLE SAE SPEC TOOL PART NUmBER AS5768-1-B1 AS5768-1-B2 AS5768-1-B3 AS5768-1-B4 AS5768-1-B5 WiRE TyPE AS50861/1, /2, /4-/7 AS50861/1, /2, /4-/7 AS22759/5, /6 AS22759/7, /8 AS22759/9-/12, /16, /17, /20-/23, /28-/35, /41-/46, AS81044/11-/13, AS85465/9-/12, MIL-DTL-81381/3, /4 AS22759/9-/12, /20-/23, /28-/31 AS22759/9-/12, 20-/23, /28-/31, /34, /35, /41-/43, AS81044/7-/14, /21, /22, MIL-DTL-81381/3, /4, /7-/14, /21, /22 AS22759/11, /12, /16, /17, MIL-DTL-81381/11-/14, /22 AS22759/16, /17, /32-/35, /41-/46 AS22759/18, /19, MIL-DTL-81381/1, /2, /5-/10, /21 AS22759/18, /19, MIL-DTL-81381/11-/14, /22 AS22759/80-/82, /91, /92 AS22759/80-/82, /91, /92 AS22759/83-/90 AS22759/83-/90 AS81044/5-/7 AS81044/5-/7 AS81044/8-/10 AS81044/8-/10 AS81044/11-/13, AS85485/9-/12 MIL-DTL-81381/1, /2, /5-/10, /17-/21 MIL-DTL-81381/17-/20 AS85485/5-/8 AS85485/5-/8 WiRE SizE CAviTiES 10-14 16-22 16-22 16-22 10-14 NA NA 5110-01-377-2272 5110-01-377-2237 5110-01-373-2486 NSN
AS5768-1-B6 AS5768-1-B7
16-26 26-30
5110-00-177-7286 5110-01-3772-181 5110-00-177-7287
AS5768-1-B8 AS5768-1-B9 AS5768-1-B10 AS5768-1-B11 AS5768-1-B12 AS5768-1-B13 AS5768-1-B14 AS5768-1-B15 AS5768-1-B16 AS5768-1-B17 AS5768-1-B18 AS5768-1-B19 AS5768-1-B20 AS5768-1-B21 AS5768-1-B22 AS5768-1-B23 AS5768-1-B24
16-26 16-26 16-26 10-14 10-14 16-24 10-14 16-26 10-14 16-26 10-14 16-26 16-26 10-14 16-26 10-14 16-26
5110-01-377-2245 5110-01-373-2487 5110-01-377-2271 5110-01-377-2313 5110-01-520-8380 NA NA 5110-01-520-8379 5110-01-530-2382 5110-01-380-9356 5110-01-373-2484 5110-01-377-2167 5110-01-377-2180 5110-00-088-1598 5110-01-373-2485 5110-01-380-9344 NA 5110-01-380-9387 5110-01-377-2247
DMC also offers Qualified Products Listed (QPL) Hand Operated Wire Strippers and Blades to cover a wide variety of wire types. Consult DMC for details.
www.DMCTools.CoM
PAGE 165
St825 Swaging tool for Cable (wire rope)

All swaging and cutting dies are of a hardened steel and are polished and heat treated to withstand high impact. Each die is marked to indicate the type and size terminal to be swaged, or cable to be cut. This rugged tool, minus the dies, weighs less than 20 pounds. It operates on standard shop air pressure of 80 to 120 PSI and is designed for hand operation or it can be mounted ti cushion base plate for bench top use. This tool is also offered in the form of a tool kit (PIN DMC99). This includes additional items such as a base plate, gages, the complete range of cutting and swaging dies and instruction manual. All packaged in a durable metal carrying case.
TyPiCAL SWAgiNg APPLiCATiONS
The DMC sT825 Swaging Tool is used to swage terminals to flexible aircraft cable (usually stainless steel) and is built to meet government specifications. The complete tool consists of a cylinder and yoke assembly that is easily accessible for quick changing of dies, air hose assembly with a shut off valve and a single action foot control valve assembly with lubricator and air filter.
PAGE 166
www.DMCTools.CoM
St825 Swaging tool

for Cable (wire rope)
TO BE USED ON miL-W-83420, miL-W-87161 AND SPECiFiED WiRES.
DmC PART NO. G689 ST825003 ST825SDB-2 ST825SDB-3 QTy. 1 1 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 MS20663-2 MS20663-3 MS20663-4 MS20663-5 MS20663-6 MS20664-2 (L) MS20664-2 (R) MS20664-3 (L) MS20664-3 (R) MS20664-4 (L) MS20664-4 (R) MS20664-5 (L) MS20664-5 (R) MS20664-6 (L) MS20664-6 (R) BA3-2 BA3-3 BA3-4 **-2 **-3 **-4 **-5 **-6 **-7 (NOTE) **-8 TERmiNAL REF. (miL.#) DESCRiPTiON GAGE SET SPACER SWAGING DIE SWAGING DIE SWAGING DIE SWAGING DIE SWAGING DIE SWAGING DIE , LEFT SWAGING DIE , RIGHT SWAGING DIE , LEFT SWAGING DIE, RIGHT SWAGING DIE, LEFT SWAGING DIE, RIGHT SWAGING DIE , LEFT SWAGING DIE, RIGHT SWAGING DIE, LEFT SWAGING DIE , RIGHT SWAGING DIE SWAGING DIE SWAGING DIE SWAGING DIE SWAGING DIE SWAGING DIE SWAGING DIE SWAGING DIE SWAGING DIE SWAGING DIE CUTTING DIE CUTTING PUNCH CUTTING DIE CUTTING PUNCH CUTTING DIE CUTTING PUNCH CUTTING DIE CUTTING PUNCH CUTTING DIE CUTTING PUNCH CUTTING DIE CUTTING PUNCH CUTTING DIE CUTTING PUNCH 1/6" 3/32" 1/8" 5/32" 3/16" 1/16" 1/16" 3/32" 3/32" 1/8" 1/8" 5/32" 5/32" 3/16" 3/16" 1/16" 3/32" 3/32" 1/16" 3/32" 1/8" 5/32" 3/16" 7/32" 1/4" 1/16" 1/16" 3/32" 3/32" 1/8" 1/8" 5/32" 5/32" 3/16" 3/16" 7/32" 7/32" 1/4" 1/4" *AT520CSB-6 AT520CB-2 AT520CB-3 AT520CB-4 AT520CS-2 AT520CS-3 AT520CS-4 AT520CS-5 AT520CS-6 AT520CS-7 AT520CS-8 AT520CD-2 AT520CP-2 AT520CD-3 AT520CP-3 AT520CD-4 AT520CP-4 AT520CD -5 AT520CP-5 AT520CD-6 AT520CP-6 AT520CD-7 AT520CP-7 AT520CD-8 AT520CP-8 *AT520CSB-5 * AT520CSB-4 *AT520CSB-3 *AT520CSB-2 CABLE DiA. CROSS REF. ATi P/N AT5205G AT520SP-1 AT520CDB-2 AT520CDB-3 AT520CDB-4 AT520CDB-5 AT520CDB-6
ST825 WiTH SWAgiNg DiES
ST825SDB-4 ST825SDB-5 ST825SDB-6 ST825SSB-2-L ST825SSB-2-R ST825SSB-3-L ST825SSB-3-R ST825SSB-4-L ST825SSB-4-R ST825SSB-5-L ST825SSB-5-R
ST825 WiTH CUTTiNg DiES
ST825SSB-6-L ST825SSB-6-4 ST825SB-2 ST825SB-3 ST825SB-4 ST825SL-2 ST825SL-3 ST825SL-4 ST825SL-5 ST825SL-6 ST825SL-7 ST825SL-8
DmC99 TOOL KiT

The DMC99 TOOL KIT is a custom metal tool kit and carrying case for the Swaging tool and includes additional items such as a base plate, gages, cutting and swaging dies and instruction manual. This tool kit meets federal specification GGG-S-00825A (GSA-FSS) NSN 5130-00-712-4855.
ST825CD-2-1 ST825CD-2-2 ST825CD-3-1 ST825CD-3-2 ST825CD-4-1 ST825CD-4-2 ST825CD-5-1 ST825CD-5-2 ST825CD-6-1 ST825CD-6-2 ST825CD-7-1 ST825CD-7-2 ST825CD-8-1 ST825CD-8-2
www.DMCTools.CoM
PAGE 167
Wiring System Service Kits

HERE iS WHERE DmCS KNOWLEDgE AND EXPERiENCE PAy OFF!
Building a tool kit to service an entire wiring system involves extensive research to select to correct tooling and ensure all servicable connectors, terminals, splices and contacts are covered. Technicians who are responsible for the maintenance or production of entire systems cannot be expected to know all the answers, nor do they have the time to do the necessary research or locate tooling. DMC has this knowledge and does the technical research for them. We apply our decades of connector industry experience and wealth of tooling information into developing the technical data for every Wiring System Service Kit we build. We design and manufacture a tool kit package which includes: 1) All the necessary tooling (crimping tools, dies, heads, installing tools, removal tools, gages, wire strippers for circular and R.F. connectors and more). 2) Complete instructions on set up and use of each tool and accessory. 3) Valuable tool application data which eliminates guesswork and dangerous trial and error tool selection.
Production Assembly
stAte of the Art foAm cutting equiPment

DMC has built Wiring System Service Kits for over 40 years and already has tool kits designed for most Military Aircraft & Ground Vehicles, Commercial Aircraft, Commuter and Executive Aircraft, Helicopters, as well as for individual Shipboard Systems, Weapons Systems and Avionics Systems. DMC kits have become the standard for wiring system maintenance. We can assist you with the selection or custom design the right Wiring System Service Kit to meet your individual requirements. After you have purchased a DMC Wiring System Service Kit, our trained personnel are available with the information and tools you need to keep your kit up-to-date.
extensive inventory investment
PAGE 168
www.DMCTools.CoM
Kit Applications
miLiTARy STANDARD KiTS
These kits are specified by many departments of the government, particularly the Navy and Air Force. They conform to MIL-M-83521, MIL-T-83507, and others. The national stock class code for most of the Military Standard Kits is usually 5120 or 5180.
gENERAL AviATiON KiT

The DMC1149 General Aviation Kit was developed for, and in conjunction with, organizations involved in the maintenance and outfitting of light commercial, business, and personal aircraft. It has since proven to be well suited for service of many types of other systems. This basic kit covers the standard power contacts sizes 16, 20, and 22D in the following connector families. MIL-DTL-24308 MIL-DTL-83723 MIL-DTL-26482 Deutsch DS Series MIL-DTL-26500 ITT Cannon DPX and MIL-PRF-38999 DC Series Also covered are stamped formed contacts used in many general purpose connectors supplied by: AMP, Elco, Winchester, Collins Narco, Bendix, King, Sperry, etc. Plus necessary tooling to cover most common types of RF connectors (i.e. BNC, TNC) using RG/58 and RG/8 coaxial cable. Experience in the field has shown these to be the most common variety. (See technical application tables elsewhere in the catalog for specific descriptions and contact P/N for military designations.) We cannot guarantee this kit will solve all your connector maintenance problems, but the necessary tooling and information will certainly be at hand for most requirements. (Our engineering department will confirm coverage of your specific requirements.) The durable steel case provides strength and light weight. The tools are restrained in protective foam cavities.
AiRCRAFT OR SySTEm KiTS

We produce Wiring System Service Kits for a wide range of individual aircraft, families of aircraft, and mixed fleets. We can custom design or alter an existing kit to meet the users requirements. some common aircraft covered are: Airbus A300, A310, A320, A330, A340, A380 Bell 205, 206, 206L, 212, 412, 430 Boeing 707, 727, 737s, 747s, 757, 767, 777 Bombardier CRJ series, DASH 8s, CL-600 to 604 Cessna Citation I, II, III IV, V, VI, VII & X Dassault FALCON 10/100, 20/200, 50/900, 50EX, 900EX & 2000/2000EX Douglas DC8, DC9 and DC10 Embraer EMB-110, -120, -312, ERJ-135, -145, -170, -190 & Legacy Eurocopter EC-135, EC-145, BO-105, BK-117 Fokker F50/F100 Gulfstream II, III, IV, V, G550 Hawker Beechcraft 800/800XP, 1900D, King Air 200, 200T, 350 Learjet 25, 31A, 35, 45, 55, & 60 Pilatus PC-12 & PC-7 Trainer Sikorsky S-76, S-92 And many more... Contact DMC, or visit our Web site, for a list of Aircraft and Systems covered by DMC Wiring System Service Kits.
PRODUCTiON (WORK STATiON) KiTS

DMC work stations are custom designed to fit your production requirements. They can utilize hand tools or pneumatic models. Special holding clamps or work positioners can be included in the container or mounted permanently to the tooling enclosure. Our engineering department can give you details on the best work station for your application.
BACKSHELL ACCESSORy KiTS

DMC produces a variety of innovative tools and adaptors which are used when fitting backshell or strain-relief hardware to electrical connectors. (Ask for our BETA Backshell Tooling Guide.) These tools are available in sets according to connector series or in complete system support tool kits. The kits can be individually designed to meet your maintenance or production demands.
www.DMCTools.CoM
PAGE 169
Wiring System Service Kits

vALUABLE DATA PACKAgES
The MaInTenanCe ProbleM Todays sophisticated aircraft, defense systems, and avionics electronics have become increasingly more complex. The technician who must maintain these systems cannot possibly be knowledgeable about all the various types of terminations and associated tooling needed to repair the vast number of interconnections which make up these systems. Once the system becomes inoperative, the pressure to return the system to operation does not permit the luxury of researching the answers to these tooling complexities. The MaInTenanCe soluTIon Tool Selection Charts DMC does all the necessary research to relieve this pressure and eliminate the guesswork and haphazard, trial-and-error selection of tools by developing detailed Tool Selection Charts to cross reference all the connectors with vital repair tool data. These charts identify the connectors in alpha/numeric order by their military and/or commercial designations; identify the contacts by part number and color code where applicable; list applicable wire sizes; and identify the appropriate crimp tool and associated turret/ positioner/die, installing tool and removal tool for wired and unwired contacts where applicable. Instruction sheets DMC provides detailed step-by-step directions on how to prepare a tool for use, crimp contacts, install and remove contacts, strip wire, and gauge tools and contacts. Instruction Sheets are also available to meet foreign language or unique special purpose tool requirements. Contents Charts These charts offer a visual representation of the storage compartments for all tools in the kit. The Contents Charts list the tools by part number, so the location of all tools ad reordering information is immediately available should a component require replacement. Packaging. DMC then packages these Tool Selection Charts, Contents Charts, and Instruction Sheets with all the crimping tools, turrets, dies, wire strippers, installing tools, removal tools and other accessories necessary to support the system in durable cases tailored to the expected work environment so the tools are properly organized and protected. With a DMC Wiring System Service Kit, the technician now has ready access to the technical data and tools for reliable, cost-effective Total Wiring System Support.
KiT CONSTRUCTiON
FoaM InserTs Foam inserts (standard for all DMC kits) provide each component with a designated storage space which is indicated on the Contents Charts. This assures the technician that no needed components are missing prior to departing to make the repair. The technician also knows, prior to leaving the on-site repair, that if a compartment is empty, then a component is missing and must be retrieved. This helps eliminate FOD (Foreign Object Damage) and accountability. ColoreD base layers & labelIng (oPTIonal) Colored base layers are available to highlight tool cavities and aid with tool tracking. Cavity Labeling is also available to help identify tool cavities and make returning tools to the proper place simpler.
CAviTy LABELiNg
COLORED BASE LAyERS
CALiBRATiON, iNSPECTiON, AND OvERHAUL/REPAiR FOR TOOL KiTS

DMC is available to overhaul and repair existing Wiring System Service Kits or periodic inspection & calibration. Well repair cases when possible and replace or upgrade foam cavities as needed. We inspect & calibrate all tooling and determine if repairs need to be made. We also identify and replace missing tools, charts, & tool instructions. Contract DMC Customer Service for an estimate or more information.
PAGE 170
www.DMCTools.CoM
envIronMenTal PaCkagIng An analysis of the environmental conditions the kit must endure is an absolute necessity. Our Portable kits are designed for on-site field maintenance. Maximum portability and component protection are the controlling design factors for portable kits. They are supplied in a durable case constructed of metal, fiberglass, or ultra-high impact copolymer. A captive restraint mechanism and heavy duty hardware are generally utilized to secure tools within their cavities.
Our Roll Around Cabinet kits are designed for FBO depot-level workshop maintenance. These kits are designed and packaged for security and convenient location of components. Depot-level cabinets are constructed of steel and have built in locks. They are equipped with roller drawer slides and wheels to allow them to roll around the work-shop or hanger, or can be loaded for easy deployment. Regardless of packaging, all reference charts are laminated for protection against the elements.
REiNFORCED CORNERS (OPTiONAL)
Fiberglass and high-impact copolymer cases are equipped with gaskets to protect against moisture intrusion. Fiberglass cases designated for ground vehicles even have steel reinforced corners.
CusToM sIzes The tools and technical data can be packaged in various configurations: from a single metal tool box to a few portable cases to a multi-drawer, roll-around cabinet. The same kit can be reorganized and reconfigured to serve different purposes. A single portable tool kit can be expanded into a larger cabinet by providing cavities for non-wiring related tools, or a single depot-level cabinet can be broken down into multiple portable cases.
www.DMCTools.CoM
PAGE 171
Limited Warranty*
LimiTED WARRANTy*
Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. Its obligation under this warranty is limited to the free correction or, at its option, the refund of the purchase price of any such unit which proves defective within ninety (90) days after delivery to the first user, provided that the unit is returned to it with all transportation charges prepaid and which shall appear to its satisfaction, upon inspection by it, to have been defective in material or workmanship. This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. DANIELS MANUFACTURING CORPORATION IS NOT LIABLE FOR CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY NATURE OR KIND RESULTING FROM THE USE OF ANY OF ITS PRODUCTS. This warranty is in lieu of all other warranties express or implied. No warranty, express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than that herein set forth. * as defined by PL93-637
PAGE 172
www.DMCTools.CoM
Ergonomic guidelines set for less demanding and mechanically complicated hand tools (such as hammers, wrenches, wire cutters and pliers) cannot be applied to crimping tools which require thousands of pounds of force. DMCs years of experience as a leader in the crimp tool industry, have confirmed that the most effective ergonomic improvements for workers can be achieved by substituting power assisted crimp tools for existing hand crimp tools wherever feasible. DMCs pneumatic, hydraulic, and battery operated power assisted crimp tools are already supporting OEM Production Line Operations where crimping is being done 24/7.
Ergonomics challEngE
For hand crimp tools, DMCs ergonomic philosophy is to design the most mechanically efficient hand crimp tool linkage possible and to fit the hand crimp tools with comfortable grips and handle shapes, thereby producing ergonomic hand crimp tools with the same quality, precision and repeatability that have become synonymous with the DMC name. The solution to the Ergonomics Challenge is to provide power assisted crimp tools for all crimping operations of sufficient volume where the user will see the value of ergonomic benefits.
Copyright 2010 Daniels Manufacturing Corp. ALL RIGHTS RESERVED
www.DMCTools.com
526 Thorpe Road Orlando, Florida 32824 USA Phone: 407-855-6161 Fax: 407-855-6884 E-Mail: dmc@dmctools.com
WWW.DMCTOOLS.COM

Tooling Guide For Aerospace Wiring Systems

Uploaded by

Copyright:

Available Formats

Tooling Guide For Aerospace Wiring Systems

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tooling Guide For Aerospace Wiring Systems

Uploaded by

Copyright:

Available Formats

What are some of the different types of crimp tools discussed in the document?

What are some of the different types of crimp tools discussed in the document?

What are some of the factors considered when designing portable tool kits?

What are some of the factors considered when designing portable tool kits?

Tooling Guide for Aerospace Wiring Systems

An & ISO A Re S91 900 Co gis 00 1:2 m te :20 00 pa re 0 8 ny d 4

Preface and Table of Contents

Standard Adjustable Indent Crimp Tool ..........................6

Dedicated Application Indent Crimp Tools .................101

Open Frame Crimp Tools ...............................................70

DANIELS MANUFACTURING CORP.

FOR WARRANTY & LIMITATION OF LIABILITY INFORMATION SEE PAGE 172

Copyright 2010 Daniels Manufacturing Corp. ALL RIGHTS RESERVED

Important Facts About Crimping

Crimping: Then AnD noW

The Crimping ConCepT

nEst & indEnt Crimp

ALL RIGHTS RESERVED.

Tensile Test Systems

For Wire Terminations and Similar Applications

The DepenDABLe ALphATron TenSiLe TeST SySTem

mpt-250B-sC motoriZEd saFE-t-CaBlE tEstEr

50F to 100F (10 to 38C)

Copyright 2010 Daniels Manufacturing Corp.

Motorized Wire Crimp Pull Tester

SpeCifiCATionS for The mpT-250B moToriZeD Wire Crimp pULL TeSTer

Custom Grips Available. Consult DMC for details.

Terminal & Wire Grips

SLOTTED TERMINAL GRIP (standard)

RING TERMINAL GRIP* (optional)

SELF TIGHTENING GRIP (optional)

MINIATURE TERMINAL GRIP (optional)

Wire Crimp Pull Tester

Terminal & Wire Grips

Custom Grips Available. Consult DMC for details.

RING TERMINAL GRIP (optional)

SELF-TIGHTENING GRIP (optional)

Copyright 2010 Daniels Manufacturing Corp.

ALL RIGHTS RESERVED.

Hand Held Wire Crimp Pull Tester

THe lAb IS no longer THe lImIT

Standard Terminal Grip

Copyright 2010 Daniels Manufacturing Corp.

ALL RIGHTS RESERVED.

Standard Adjustable Crimp Tool

* Change to SAE AS22520 in process consult DMC for status.

Copyright 2010 Daniels Manufacturing Corp.

ALL RIGHTS RESERVED.

insErt prE-strippEd wirE

ClosE / opEn handlE

rEmovE tErminatEd wirE assEmBly

Copyright 2010 Daniels Manufacturing Corp.

ALL RIGHTS RESERVED.

miniature Adjustable Crimp Tools

* Change to SAE AS22520 in process consult DMC for status.

Copyright 2010 Daniels Manufacturing Corp.

ALL RIGHTS RESERVED.

miDDLe rAnge inDenT Crimp TooL mh860 m22520/7-01

MIL 860 PART NUMBERS MILITARY P/N