Introduction

Welcome to the Third Edition of Tyco Safety Products Fire Product Catalogue of product available from our Letchworth UK Distribution Centre. We aim to make your product range as comprehensive as possible to ensure you never need go anywhere else. To meet this goal, our product specialists, with your help, have selected the most appropriate, cost effective product range all available for next day delivery. In line with our ISO 9000 accreditation, only those products that meet the highest quality criteria have been included.

Our warehouse is one of the largest Fire & Security product distribution centres in Europe. Our goal is to despatch product on the same day as we receive your order. Our warranty and service returns policy is second to none. We recognise that your business is highly dependant on excellence in customer service and to help achieve this we offer extended warranty from many of our suppliers. Full credit is also available on a No Question No Fuss basis for any new in-warranty product returned to the distribution centre.

Our training department offers comprehensive sales, design and engineering training on our complete range of products. We recommend you take advantage of this free of charge service. As always, training can be undertaken any time, anywhere to suit your business needs. Contact our telephone Help Line for further information.

Tyco Safety Products Web site contains an endless supply of product related information. It is regularly updated and features many aids to the selling process including presentation material, independent product test results and detailed technical information. Our web site can be found at www.tycosafetyproducts-europe.com

To enhance customer specifications and quotations we also provide a series of product datasheets which can give our clients an opportunity to read more about the product. We are positive that together we can help grow your business and we look forward to working with you in the future. For further details on this catalogue, contact our customer telephone Help Line on +44 1932 74 3327.

Page 1

Table of Contents

3 15 23 36 39 41 44 48 49 53 54 55

59 62 67 69 72 74 80 84 87 88 90 92 93 98

Addressable Fire Systems - LPCB Approved Addressable Fire Systems - UL/FM Approved Conventional Fire Alarm Panels - BS5839 & EN54 Conventional Marine Panels Batteries, PSU & Door Release Units Addressable 900 Series Detectors Conventional 600 Series Detectors Standard Detector Bases Functional Detector Bases M600/900 Detector Ancillaries Duct Probe Air Sampling Aspirating Smoke Detectors VESDA Visions Systems Special Hazard Detectors Intrinsically Safe Point Detectors Intrinsically Safe Barriers & Housings Beam & Linear Heat Detectors Detector Test Equipment CP Series Callpoints Fulleon Range of Sounders MINERVA Range of Sounders MINERVA Firecryer - Voice Enhanced Sounders Visual Indicators Auxiliary Interface Relays/Miscellaneous Fire Equipment Water Leak Detection Alarms Wire Free Product Range Approvals Listing of Company Equipment

Page 2

Addressable Fire Systems - LPCB ThornGraph

Approved
ThornGraph provides a graphical user interface to the ThornNet, network communications system. ThornNet will support up to a maximum of 3 ThornGraph user interfaces on the network. ThornGraph consists of a standard personal computer, that is linked onto the ThornNet via a TLK-530 network interface module. ThornGraph is primarily operated by either mouse or touch screen, with two monitor options available 17" or 22" touch screen. For an up to date specification of the latest approved PC platform contact the Fire Product Manager. Product Codes 508.020.007 Compatibility tested PC for ThornGraph graphics terminal preloaded and configured with default passwords 636.006.060 Thorn Graph 17 Standard Monitor 508.020.006 Thorngraph 22 touchscreen - Liyama touch pro 510 complete with 5 year warranty 508.020.101 Software package A for 1 network node 508.020.102 Software package B for 2-5 network nodes 508.020.103 Software package C for 6 or more network nodes 508.020.104 Software package D for additional graphics nodes on the same ThornNet Datasheet - Product Code PSF80 Thorngraph Manual - Vol011B Software Operating Manual

Introduction ThornGraph is a combined text and graphics system which provides a window through which the status of all MINERVA fire controllers connected to ThornNet can be monitored and controlled. ThornGraph has been designed with clear displays and simple controls which can be quickly and easily understood by an operator rather than an engineer. The system is designed to be used with a touch screen or mouse and does not require the use of a Qwerty keyboard. P based .C. ThornGraph uses the latest in operating system software. Windows NT TM is a multi-tasking operating system providing a truly reliable platform for a real time monitoring system using a P Using the secure acknowledged transfer of .C. events, up to three ThornGraph systems can be used to monitor up to 62 MINERVA controllers connected to ThornNet. ThornGraph uses a unique configuration tool GRAB-IT, (Graphical, AutoCad, Bitmap, Information, Transfer) to automatically configure the system. Installation plans, device type and location, flood fill areas, flood fill locations, zoom areas and zoom magnifications are all imported

from AutoCad. This configuration tool significantly reduces configuration time, increases the integrity of information and enables simple updates to the system in the future. Features Combined text and graphics display on a single P .C. Connected to ThornNet, a single system can be used to monitor up to 62 MINERVA fire controller Designed for touch screen operation Simple operator controls, no Qwerty keypad High resolution colour SVGA display Windows NT TM multi-tasking operating system Four level automatic zoom sequence available for each point Overview map maintains a view of wider areas whilst zooming into detail in the graphics window Procedure window provides additional text and operator instructions for each event Classification of events helps to maintain a record of activation and the causes Browse icons placed on maps can be used to pan across an installation in a logical sequence Control icons placed on maps can be used to initiate actions at the MINERVA fire controller, used to operate ancillaries such as HVAC. Automatic configuration using the GRAB-IT tool, including Cad drawings, text messages, locations, flood fills and zoom areas Full password protection and multiple operator levels Remote control of MINERVA fire controller across the network using VFP Virtual Front , Panel Real time on line event management and historic information system User designed search keys can be used to generate specific and useful reports

ThornGraph T ypical Arrangement

Page 3

ThornNet
ThornNet provides a true peer to peer communications interface for up to 62, MINERVA 8, MINERVA 16E or MINERVA 80 fire controllers in any combination and the ThornGraph, graphical user interface. The units can be inter-connected into a large network without the need for a host or master controller. ThornNet is based upon a combination of hardware and software that allows MINERVA fire controllers (Nodes) to be linked together. The ThornNet supports up to 61,380 analogue/addressable points, 4,960 zones and over 7,000 digital I/0 points. The network coordinates and distributes alarm annunciation and supervises system operation. When connected to the network, each MINERVA controller maintains its full stand-alone features, functions and capabilities. Features LPCB approved A peer to peer network that does not use a host or master controller. 62 nodes, 61,380 points, 4,960 zone capacity. Virtual Front Panel (VFP) enables an operator to interrogate and control any MINERVA controller from the keypad/display of any other MINERVA controller. Bi-directional signalling. Open/short circuit isolation. Open/short circuit location. Events originating at any MINERVA controller can be used as an input to event/action processing of other panels to co-ordinate and distribute systems control. System can be configured in the field using Consys software. Failure of one node does not affect any other node or communications between nodes. In the event of multiple failures, nodes will automatically re-generate into independent fully functional networks. Automatic network re-configuration when a previously failed node is restored to the network. Up to 3,000 meters between nodes with twisted/shielded cable. System will operate on standard 2 core MICC. MINERVA controllers may be grouped into sub-nets where each panel is programmed to inter-act only with other selected controllers. Plug-in module (TLK-530) easily connects a MINERVA fire controller to the network. Data is re-generated at each MINERVA controller and is sent out over the ThornNet as new clean data. All degradation in received data due to noise on a line, line attenuation, or phase shifting is eliminated when the data is re-generated. The ThornNet uses a token-passing, non collision communication protocol for data transmission. "Network zones" and "sectors" allow the network controllers to be configured as a single "seamless" system. ThornGraph, a P.C. based graphical user interface, connects directly on to the network. ThornNet supports combinations of MICC, twisted/shielded pair cabling, fibre optic cabling, and dedicated telephone line. Multiple communication topologies bus or ring. The MINERVA ThornNet communications network is a collection of network interface modules and peripheral equipment that together form a network. Product Codes 557.180.219 ThornGraph PC to TLK-530-G connection cable 557.180.148.A TLO/TLD housing for a combination of 2 x TLO530 or TLD530 Communication interfaces (ADT branded) 557.180.147 Spare TLK -530 firmware Version 2.36 Datasheet - Product Code PSF81 ThornNet Manual - Vol07A-04-D1 Communications Systems Manual

TLK-530
The key hardware component that makes the network possible is the TLK-530 module. The TLK530 provides the electrical/mechanical means to connect the components of the network to local and remote network signalling circuits. Installation of the TLK-530 is simplified with an edge connector that plugs onto the main processor board of the MINERVA controller. The TLK-530 provides RS-485 communications over a twisted shielded pair as a standard configuration. The distance between controllers can reach 3,000 meters at a speed of 38.4 Kbs using 18AWG twisted shielded cable. Fits within the MINERVA housing.

557.180.215 TLK530 ThornNet network node interface module (Note: Functionally the same as TFX-TLI530)

557.180.218 TLK 530G ThornNet interface for ThornGraph PC c/w 240V PSU and housing

TLO-530
The Fibre Optics Module (TLO-530) is used to interface one fibre optic channel to the TLK-530 module. The TLO - 530 fibre optic interface module converts RS-485 digital data current pulses from the TLK-530 network interface module to light pulses. The light pulses are then carried over fibre optic cabling to another TLO530 where the pulses are converted back to RS485 digital data current pulses. Two TLK-530 modules are required per panel for redundant path star connections and when using fibre optics in both directions of ring and bus connections. Two (2) type 62.5/125 fibres between controllers (4 fibres when using redundant path star connections) allow the interface to transmit signals at 38.4 Kbs at distances as high as 4,000 meters between controllers. Up to two units can be fitted into a TLO/TLD Housing which has a chassis plate to accommodate the units. Technical Specification Dimensions: 210H x 130W x 30D mm Product Codes 976166 TLO 530 ThornNet fibre optics interface assembly 557.180.148.A TLO/TLD Housing - ADT branded

TLD-530
The Telephone Line Drive Module (TLD-530) is used to interface two (2) dedicated telephone line circuits to the TLK-530 module. The TLD-530 line driver module converts the RS-485 signals received from the TLK-530 network interface module to signals capable of being transmitted over the telephone line circuits.One TLK-530 supports two channels so only one module is required per controller for both single path and redundant path star connections. The interface allows for field configured baud rates and supports distances of up 3,000 meters. Up to two units can be fitted into a TLO/TLD Housing Page 4 Technical Specification Dimensions: 170H x 120W x 20D mm Product Codes 557.180.699 TLD 530 ThornNet direct line driver PCB 557.180.148.A TLO/TLD Housing - ADTbranded

MINERV A Analogue Addressable Fire Controllers

Features 8, 16 & 80 Zone networkable controllers Seamless peer to peer networking Full function repeaters LPCB Approved T890/891 Marine Approved variants Mandarin option Loop power sounder options Wide range of addressable devices Conventional system upgrade path Continuous and pulsing sounders Programmable mapping of signals for controlled evacuation On-site software configuration Powerful cause and effect software programming Remote printer, mimic and VDU options 500 event memory Pre-alarm capability Threshold compensation for optimum detector performance Detector condition monitoring advises when detector servicing is required Weekly test reminder and walk test facility Addressable intrinsically safe System 602 Surface and flush mount options Technical Specification (Excludes Marine) Dimensions: 320H x 440W x 140D mm Approx. Weight: 7Kg Colour: Dawn Grey BS4800 10-A-03 Installation: Surface or Semi-flush Operating Temp: -10C to + 55C Storage Temp: -20C to + 65C Humidity: Up to 95% RH (Noncondensing) Housing Protection: IP43 Mains Supply: 110V-120V/220V-240V a.c. 10% at 50/60HZ 5% Secondary Supply: 24V d.c. Nominal NOTE: A self contained 2.7 amp switch mode power supply together with 2 x 7 AH 12V or 4 x 10 AH 6V batteries may be fitted inside the main housing of the MINERVA 8 or MINERVA 16E (See Note 1 for battery fixing kits). The MINERVA 80 requires a separate housing for its power supply. Batteries up to 2 x 17 AH 12V may also be fitted in this housing. See AC Power Module. Datasheet - Product Code PB56 Minerva 8, 16, 16E, 80 Panels Manual - Vol015A-02-D1 Minerva Range of Analogue Addressable Fire Controllers

MINERVA is a comprehensive and reliable range Marine approved with various other international of networkable analogue addressable fire cross listings. controllers with over 60,000 installations worldwide. MINERVA complies with BS5839 Pt 4 and can be installed to BS5839 Pt. 1. The controllers and ancillaries are LPCB and Technical Specification LPCB Approved MINERVA 8 MINERVA 16E MINERVA 80 Marine Approved (Note4) T891M T890M Zones 8 16 80 Points 99 198 990 Zonal LED Display 8 16 80 LCD Display 80 Character 80 Character 80 Character Sounder Circuits (2 off) 500mA each 500mA each 500mA each Alarm Relay (1 off) 30Vd.c. @1.5A 30Vd.c. @1.5A 30Vd.c. @1.5A Fault Relay (1 off) 30Vd.c. @1.5A 30Vd.c. @1.5A 30Vd.c. @1.5A Product Codes Control Panel Surface Mounting 557.180.564 557.180.550 557.180.556 Control Panel Flush Mounting 557.180.565 557.180.553 557.180.557 Marine Panel 557.180.402 557.180.401 Repeater Panel Surface Mounting 557.180.566 557.180.554 557.180.558 Repeater Panel Flush Mounting 557.180.555 557.180.559 Marine Repeaters (T290/291) 557.180.404 557.180.403 Special Control Panel Variants Loop Powered Surface Mnt Panel Note 3 Loop Powered Flush Mnt Panel Note 3 Panel with Arabic overlay Panel with Dutch overlay 557.180.701 Panel with Mandarin graphics display Additional Components Note 1 : 557.180.055 557.180.065 557.180.410 Note 2 : 557.180.203

Note 3 Note 3 557.180.568 557.180.703 557.180.575

557.180.569 557.180.570 557.180.567 557.180.702 557.180.576

Note 3 : Note 4:

557.180.014 557.180.424 557.180.092 557.180.454 557.180.405

MINERVA 8 and 16E battery fixing kit. MINERVA 80 battery fixing kit T890 battery fitting kit Loop Powered MINERVA 80 panels come complete with a special Loop Powered ALXM (loop card) . An additional loop power ALXM card (MINERVA-557.180.203) is required for each additional 2 loops. ALXM (2 loop) expansion card for standard MINERVA 80 ALXM (2 loop) expansion card for T890 MINERVA Loop powered insertion module converts MINERVA 8 and 16E to Loop Powered panels. T890/891 Bulkhead mounting kit T690M Marine Power Unit

Page 5

MINERVA 8-16E -T891 - Functional Schematic

MINERVA 80- T890 - Functional Schematic

Page 6

MINERVA Repeaters
The MINERVA fully functional repeaters are available for all models of the MINERVA series controllers. The repeaters are LPCB approved and offer the same control and monitoring facilities as the main panel. Each repeater includes one MPIM Module and up to seven repeaters can be attached to the remote bus of the main panel. The technical specification for the repeater is the same as the main panel shown on the previous page, product codes are also shown there.

MINERVA - Auxiliary Expansion Outputs

Datasheet - Product Code PB56 Minerva 8, 16, 16E, 80 Panels Manual - Vol015A-02-D1 Minerva Range of Analogue Addressable Fire Controllers

Multi Purpose Interface Module (MPIM)

The Multi-Purpose Interface Module [MPIM] is mounted on the rear of the front cover assembly and is used to provide interface facilities between the main processor card [MP] and a number of different peripherals. An MPIM must have its 'Personality' [configuration] set by means of plugin headers to suit the particular application and set the device address. The board can perform a number of functions, each 'Personality' being a different combination of these functions. All MPIMs come fitted with Version 3.2 firmware and a separate product code is available for upgrades - refer to TIB 0360 if necessary. All MPIMs come fitted with a PROM (557.180.052) which enables an MPIM to be used with a serial printer. If retrofitting a MPIM without this PROM, for use with a remote printer, this chip is required. Product Codes 557.180.012 MINERVA Multi Purpose Interface Module [MPIM] 557.180.052 MINERVA serial printer driver kit (Spare)

Input/Output Expansion Cards (XIOM)

The I/O on the XIOM can be set in banks of 8 to operate as follows: LED driver outputs (10mA source) Relay Driver Outputs (100mA sink) Voltage Monitor Input (8 - 30Vd.c. Normal) Volt Free Contact inputs Technical Specification Dimensions: 144H x 85W x 15D mm Operating Temp: -10 to +65C Storage Temp: -20 to +65C Relative Humidity: 95% RH (Non-Condensing) Product Code 557.180.016 XIOM MINERVA Input/Output Expansion Modul16 Way

The XIOMis a 16 universal input/output expansion board. Up to 5 x XIOM cards can be driven from each MPIM subject to its personality settings.

Remote Mimics
the MINERVA addressable system. It is supplied as a single PCB, which may be mounted in an expansion box or on the rear of a free-standing panel, as required. It may be used to drive up to 80 zonal LED indicators, arranged in any configuration, together with two FIRE LEDs, one FAULT LED and one ISOLATE LED. These indicators operate in the same manner as the corresponding indicators on the panel. A remote Mimic can be connected to the MPIMs configured as remote Mimic drivers via the remote bus. Up to 16 MPIMs may be connected on to the remote bus, each with a unique address [set on-board]. The difference between a Repeater and a Mimic is the local control facility which is not featured in a Mimic. Both Repeater and Mimic include audible and visible warning facilities. Technical Specification Dimensions: 235H x 190W mm Operating Temp: -10C to +55C Storage Temp: -20C to +65C Relative Humidity: Up to 95% RH Non Condensing Product Code 557.180.005 MINERVA 80-Way Mimic Driver Module

The 80-Way Mimic allows custom-made display and presentation panels to be incorporated in

DC/DC Converter (DCCM)

The DC/DC Converter produces regulated d.c. supplies from the ACPM outputs for use by the panel logic circuits. The DC/DC Converter is normally supplied only with MINERVA 80 and is fitted into the panel housing. A special version is available for loop powered MINERVA systems. An additional DC/DC converter may be used to supply power to two additional MPIM cards. Product Codes 557.180.051 MINERVA DC/DC converter module 557.180.205 MINERVA loop power DC/DC converter module

Page 7

AC Power Module (ACPM)

Storage Temp: Humidity: -20 to +65C Up to 95% RH noncondensing Housing Protection: IP43 Mains Supply: 110-120/220-240Va.c. 10% 50/60Hz 5% Charger Current: 2.7A @27.6Vd.c. Product Codes 557.180.001 MINERVA power module - non addressable ACPM 557.180.561 MINERVA surface mounting power box complete with non addressable ACPM 557.180.002 MINERVA power module - addressable ACPM 557.180.560 MINERVA surface mounting box complete with addressable ACPM

The AC Power Module [ACPM] is common to all MINERVA addressable models and supplies power to all the PCBs and other devices fitted. It contains an integral battery charger which continuously charges back-up batteries. These are required to supply the system in the event of a mains failure, in order to comply with the

requirements of BS 5839 Part 1 [1988]. Addressable versions of the ACPM are available. This unit reports fault conditions to the control panel via the addressable loop. Technical Specification Housing Dimensions: 320H x 400W x 140D mm Colour: Dawn Grey Operating Temp: -10 to +55C

Remote LCD Displays

display Provides an internal log of up to 150 events Provides internal audible warning of an event Allows the event log to be scrolled Local internal buzzer silence Connects to host panel's RS232 port (maximum cable length between panel and first repeater of 15m) Provides an external sounder to mimic the internal buzzer Can be connected to an unlimited number of other LCD Repeaters by using the RS232/RS422 converter (up to 1200m between repeaters) The LCD repeater must not be used in the primary fire path. It must not be used as the sole warning that a fire exists. T echnical Specification Dimensions: 150H x 200W x 75D mm Material: Bayblend polycarbonate/ABS alloy Operating Temp: -10C to +55C Relative Humidity: Power Supply: Ext. Sounder relay: Up to 95% RH noncondensing 200mA @24Vd.c. 500mA @24Vd.c.

The Remote LCD Repeater Module is designed to provide an independent scrolling log of system status at numerous points within a building or site. The module interfaces directly to a serial printer port of the MINERVA addressable fire panel. If a local printer is already connected to the Panel's MPIM serial port, a second MPIM must be used. Features Uses a back-lit 4x20 character alphanumeric

EMC: BS EN50081-1 and 50082-1 Product Codes 557.180.035.A Remote LCD Repeater - ADT branded 557.180.035.T Remote LCD Repeater - Thorn branded 557.180.062 MINERVA MPIM to printer lead (D type 25 way male) 557.180.667 MINERVA MPIM to printer/PC lead (D type 9 way female) 557.180.152 9 way gender changer for 557.180.667 557.180.151 RS232/422 converter for LCD Repeaters

MINERVA Printer Options

WALL MOUNTED PRINTER This unit is designed to provide a wall-mounted printing facility for the MINERVA analogue addressable fire control panels. The unit is powered from 240V a.c. 50Hz and uses a 42 column printer with an RS232 serial input. It is designed primarily as a hard copy alarm/fault logging facility. A serial printer cable is used to connect the printer to an MPIM configured as a printer driver. Technical Specification Dimensions: 320H x 170W x 140D mm Colour: Dawn Grey Operating Temp: 0C to 40C Storage Temp: -15C to 40C Relative Humidity: 10% to 90% RH [non-condensing] EMC: BS EN 50081-1 and BS EN 50082-1 Operating Voltage: 180V to 264V a.c. Protection: External 2 Amp fuse Power: 20W WARNING:The mains supply must be from the same source as the MINERVA control panel and be isolated by the same device. The serial printer cable must be run in metal conduit to comply with the EU EMC Directive (89/336/EEC). Product Codes 557.180.076.A MINERVA Wall Mounted Printer (ADT branded) 557.180.076.T MINERVA Wall Mounted Printer (Thorn branded) 557.180.202 MINERVA MPIM to printer (wall mounted) lead (right angled D type 25 way male) 557.180.079 Bezel for flush wall mounted printer 557.180.223 MINERVA wall mounting printing ribbon (Spare) 557.180.052 MINERVA Serial Printer driver kit 509.022.008 Spare printer paper

LOCAL PRINTER A serial port is also available from the controller's MPIM, which may be used to drive a serial printer or a terminal/computer. In cases where more than one printer is required locally, it is possible to "piggy-back" an additional MPIM onto the MPIM on the front panel and this will, when connected to the local bus, provide the interfaces (up to a max of 8) for additional (printer) equipment. REMOTE PRINTER If it is required to have printers positioned at a remote location, an MPIM must be used. This MPIM has its address set on-board and is connected to the controller's remote bus. The connections between a MINERVA controller and remote printers are shown in the diagram below. An additional DC/DC converter module would typically be required to power the MPIM (the DC/DC converter can power two MPIM cards). Page 8

Desktop Printer
performance with paper handling flexibility and quiet operation. Features 300 cps draft/ 90 cps LQ. Quiet operation Lightweight and compact design 9 LQ fonts 2 paper feed paths Convertible push/pull tractor Paper guide Auto loading Paper park Cable feed recess Epson LQ standard terminal emulation available Parallel and serial interface Technical Specification Dimensions: 159H x 366W x 275D mm Weight: 4.4kg Operating Temperature: 5C to 35C Storage Temperature: -15C to 40C Relative Humidity: 10% to 80% RH [non-condensing] Operating Voltage: 180V to 264Va.c. EMC: BS EN 50081-1 and BS EN 50082-1 Product Codes 557.180.239 MINERVA printer LQ-300+ 557.180.220 LQ80 ribbon black (spare) for use with desktop printer. 557.180.062 Minerva MPIM to printer lead (D type 25-way male)

The printer is designed as a low cost business printer ideally suited for mounting adjacent to the fire control panel.The LQ-300+ combines high

Pager Interface
controllers MPIM serial port, a second MPIM must be used. The pager system requires a +12V d.c. connection (from the MINERVA) and a serial port connection. If the transmitter needs to be located further than 2 m from the MINERVA, then a nonstandard serial printer cable may be used, up to a maximum distance of 14m. CAUTION: Before any installation is carried out, an on site radio paging license must be obtained by the customer. Care should be taken when designing pager systems. Normal practice indicates that a site survey should be done. Contact Product Management for additional advise on site surveys. The Type A alarm pager can display alarm/fault messages. The Type A maintenance pager displays all messages sent by MINERVA. The pagers: Display messages sent out by the MINERVA as displayed on the Minerva LCD Internal log of up to 40 events Audible and/or vibrate warning of event Allows the event log to be displayed. The transmitter: Connects using a 9way D type MINERVA interface lead Can be setup for transmission to Type A Using standard aerial, provides a 500 metre sphere of transmission in open air Technical Specification Dimensions: 328H x 190W x 75D mm System operating voltage: 12 to 13.8 Vd.c. Effective radiated power: 500mW Frequency range: 50-470 MHz Channel spacing: 25KHz TX baud rate: 512 or 1200 Type approval ETS 300 224, MPT1383 Cert No 13249, EC type approved to ETS 300 682 Approval No. 13331 Product Codes 577.002.001 Pager Transmitter 577.002.002 Type A alarm pager 577.002.003 Type A maintenance pager 577.002.007 Pager aerial 60 db gain up to 1km 577.002.008 Optional feeder cable Manual - Vol08A-05-D1 Ancillaries Manual

The MINERVA pager system is designed to provide a facility to signal all text messages or alarm/fault messages from a local transmitter to the pagers. The transmitter connects to the serial printer port of an MPIM, if a local printer is connected to the

MINERVA CONSYS and Firmware

The function of the Consys configuration software is to customise a MINERVA addressable panel system to the requirements of the customer. Configuration is performed on the basis of data obtained from the customer. This data should have been documented by the system designer using form 180 (available from the website) and includes the following information: The number and location of detectors and other ancillaries. The addresses of the above devices The 'zoning' requirements The number and location of any interface boards The addresses of the above boards Bell mapping options Co-Incidence grouping System fire options Network configuration This information is fed into 'CONSYS' and stored on a floppy disk. This disk can be used with a laptop computer and downloaded into the panel via a download lead. Most laptop computers have 9 way serial comms ports, but sometimes one may require a 25 way serial download lead. A "dongled" variant of Consys exists which only permits Consys to be installed on PCs with a dongle. Additionally variants also exist which restrict access to Consys features i.e. customer and distributor variants. A number of Consys variants are available e.g. UK (non-dongled), UK dongled, UK Customer, UK distributor, US (non-dongled), Dutch (nondongled), Marine (dongled). Registered copies of the Consys configuration software are available from the technical distribution department, Walthamstow, London E17 Tel +44 (0) 208 919 4004. Datasheet - Product Code PB56 Minerva 8, 16, 16E, 80 Panels Manual - Vol015A-02-D1 Minerva Range of Analogue Addressable Fire Controllers and Vol011A-01-XX Software Operating Manual Firmware Upgrade Ver 12.0 Ver 12.1 Ver 12.2 Ver 12.3 Ver 12.4 Product Codes 557.180.063 MINERVA MPIM to PC (D25) serial lead assembly 557.180.667 MINERVA MPIM to PC (D9) serial lead 557.180.105 MINERVA full CONSYS software key (dongle) 557.180.106 MINERVA customer/distributor software key (dongle) 557.180.234 Customer CONSYS pack vers 12.1

M16E 557.180.831 557.180.155 557.180.159 557.180.163 557.180.167

M80 557.180.832 557.180.156 557.180.160 557.180.164 557.180.168

ALXM 557.180.833 557.180.157 557.180.161 557.180.165 557.180.169

Page 9

Housings
MINERVA panels are supplied with a housing. Matching dawn grey housings are available for housing other equipment along side the MINERVA panel. The general purpose housing is available in surface and flush models with matching diecast door. Other housing options include the terminal chamber PCB which provides neat terminations for addressable loop field wiring. The optional gland cover provides a neat installation for the surface mount installations and the 19 rack mount kit allows the surface mount MINERVA panel or general purpose housing to be fitted in a 19 rack. Product Codes 557.180.033 MINERVA general purpose housing flush

557.180.452 MINERVA Marine 19"rack mounting kit for use with surface mounting housings

557.180.032 MINERVA general purpose housing surface

557.180.022 MINERVA terminal chamber PCB assembly

557.180.021 MINERVA plain cover assembly for use with general purpose housings - see below Marine Housing Options 557.180.406 MINERVA Marine Terminal Chamber 557.180.410 MINERVA Marine Battery Fitting Kit 557.180.454 MINERVA Marine Bulkhead Mount

557.180.034 MINERVA expansion housing surface

Datasheet - Product Code PB56 Minerva 8, 16, 16E, 80 Panels Manual - Vol015A-02-D1 Minerva Range of Analogue Addressable Fire Controllers

MINERVA Spares
The following additional items are available as standard spares. Other components can be supplied as specials. Product Codes 555.180.002 MINERVA 16E front cover assembly 557.180.408 (Available on BSO) T890 Front cover assembly 555.180.003 MINERVA 80 front cover assembly 557.180.407 (Available on BSO) T891 Front cover assembly 557.180.010 MINERVA 80 motherboard PCB 557.180.054 MINERVA 16 mounting plate kit 557.180.200 MINERVA main processor PCB no software fitted 557.180.204 Motherboard loop powered for use with MINERVA 80 (spare) 557.180.209 Keyswitch assembly for use with MINERVA controllers (spare) 557.180.208 MINERVA spare keys (used on MINERVA controllers mid '94 Onwards) 557.180.722 MINERVA 80 cover assembly dutch (spare) Datasheet - Product Code PB56 Minerva 8, 16, 16E, 80 Panels Manual - Vol015A-02-D1 Minerva Range of Analogue Addressable Fire Controllers

Page 10

MINERV A Addressable Modules

An extensive range of ancillary modules has been specifically designed for use with the MINERVA 8, 16E and 80 range of Fire Control Panels. The M520 range of ancillary modules provide the MINERVA Panel with a wide degree of systems application flexibility. This allows the field addressable loop from the control panel to both receive inputs to the system and control outputs from it. This broad range of modules allows the scope of the fire detection system to be significantly extended beyond a simple fire detector - alarm sounder based alarm system. The command modules enable fire doors to be closed, fire dampers to be controlled, provide an interface to shut down HVAC equipment. Other applications include an interface between shopping centre tenants' premises and the landlords' central control system. With the high systems integrity offered on the MINERVA Panel the command modules can also be used to control a public address based building evacuation system. Features Communications and control interface to MINERVA Fire Panels High Systems Integrity Allows remote sounder circuits Allows loop powering of sounders and/or beam detector units Monitoring of external equipment, e.g. smoke dampers Reduced installation cost Removes the need for separate plant control circuits Datasheet - Product Code PSF86 520 Series Ancillary Equipment (unless otherwise indicated). Manual - Vol08A-02-D* Ancillaries Manual * Design section indicated next to product code.

LI520 MK2- Line Isolator Module

loop. Line isolators should be used at the boundary of each zone so that no more than a single zone is made inoperative during a short circuit condition. This feature is a requirement of BS5839 Part 1 1988. The LI520 Mk2 is also fitted with a amber LED to indicate locally when the isolator has been tripped. The maximum number of line isolators per MINERVA loop is 12. There are also two isolator circuits built into the MINERVA control panel loop drivers (one for each end of the loop). The LI520 Mk2 takes its operating power from the MINERVA loop. The module is not addressable and will therefore not take an address on the loop. Technical Specification Powered: Loop Temperature Range: -10C to 70C Operating Humidity: up to 95% RH noncondensing Dimensions: 60H x 84W x 14D mm Product Codes 545.001.007 MINERVA LI520 Mk2 line Isolator module 545.001.009 LI520/M520 line isolator and cover assembled Manual - Vol08A-02-D20 Ancillaries Manual

The LI520 Mk2 line isolator is used to ensure that a short circuit fault on the addressable loop will not cause a total systems failure. LI520 Mk2's effectively contain the fault to specific areas of the

CM520 - Contact Monitoring Module

The CM520 module provides the facility to monitor an external contact, e.g. fire door monitor. This monitored point can then be used as a control input for the MINERVA panel which is activated when the monitored contact is either open or closed. A delay between the monitored contact opening/closing and the activation of the control input can be specified within the control panel settings. The CM520 takes its operating power from the MINERVA loop. The module is addressable and will therefore take one address on the loop. Technical Specification Powered: Loop Temperature Range: -10C to 70C Operating Humidity: up to 95% RH noncondensing Dimensions: 60H x 84W x 14D mm Product Codes (Vol08A-02-D3) 555.180.021 CM520 contact monitor module (1 input) 555.180.026 CM520/M520 contact module and cover assembled

TM520 - Timer Module

The TM520 provides an output that can be activated based on a delay time. If either the keyswitch on the module is activated, or a predefined event within the control panel occurs then a timed delay (set between 10 minutes and 21 hours 10 minutes) is started. When the delay reaches zero the TM520 output is activated. The unit sounds an internal buzzer and shows a red LED when the output is active, and shows a yellow LED when the timer is counting down. To provide a warning that the delay is nearly over, the red LED and the buzzer will pulse 5 minutes before the end of the delay . The TM520 requires a separate 24Vd.c. supply to operate. The module is not addressable and will therefore not take an address on the loop. Technical Specification Powered: 24Vd.c. Temperature Range: -10C to 70C Operating Humidity: up to 95% RH noncondensing Dimensions: 87H x148W x 14D mm Product Code (Vol08A-02-D16) 557.180.423 TM520 timer module - non addressable

RM520 - Relay Module

The RM520 provides one volt-free change-over relay contact rated at 1A @ 24Vd.c. Command signals to drive the relay are configured in the MINERVA control panel software with the trigger point being defined as a detector or other event programmed into the system. The relay contacts are monitored and the state (activated/deactivated) is reported back to the control panel. The RM520 is also fitted with a red LED to indicate locally when the relay is operated. Typical applications for the RM520 include fire door control or lift control. The RM520 takes its operating power from the MINERVA loop. The module is addressable and will therefore take one address on the loop. Technical Specification Powered: Loop Temperature Range: -10C to 70C Operating Humidity: up to 95% RH noncondensing Dimensions: 60H x 84W x 14D mm Product Codes (Vol08A-02-D1) 568.001.011 RM520 relay module (1 x 24Vd.c. rated relay) 568.001.017 RM520/M520 relay module and cover assembly

Page 11

DM520 - Conventional Detector Module

The DM520 is used to interface a single zone of conventional detectors onto the MINERVA analogue addressable loop. This provides a cost effective and easy method of extending existing conventional systems or a future upgrade path for new conventional systems. The DM520 is also fitted with a red LED to indicate locally when the associated conventional zone has entered an alarm condition. The DM520 requires a separate 24V d.c. supply to operate. The module is addressable and will therefore take one address on the loop. Technical Specification Powered: 24V d.c. Temperature Range: -10C to 70C Operating Humidity: up to 95% RH noncondensing Dimensions: 60H x 84W x 14D mm Product Code (Vol08A-02-D2) 517.035.012 DM520 conventional detector module 517.035.018 DM520/M520 detector module and cover assembled

MDM521 - Multi-DM Module

The MDM521 module is used to interface conventional detection zones onto the MINERVA analogue addressable loop in a similar way to the DM520. The MDM521, however, can be configured to interface up to 8 zones of conventional detectors rather than the DM520's single zone. The module has an LED for each of the 8 zones which will show red when the zone is in alarm and yellow if the zone is in fault. This module provides a cost effective method of interfacing several conventional zones onto an addressable loop. The MDM521 requires a separate 24Vd.c. supply to operate. The module is addressable and will take as many addresses as there are zones being monitored (i.e. between 1 and 8). Technical Specification Powered: 24Vd.c. Temperature Range: -10C to 70C Operating Humidity: up to 95% RH noncondensing Dimensions: 290H x 88W x 30D mm Product Code (Vol08A-02-D25) 517.035.017 MDM521 Multi circuit conventional detector module

SM520 - Sounder Driver Module

The SM520 module is used to provide an output to alarm sounders or visual warning devices in response to a control signal from the control panel. The devices are controlled directly from the SM520 on the addressable loop rather than from outputs on the control panel, thereby significantly reducing wiring costs. The output wiring to the alarm devices is fully monitored and the module has the capability to drive up to a maximum of 500mA alarm device load. If higher alarm device loads are required then an SB520 sounder booster module must be used in conjunction with the SM520. The SM520 requires a separate 24Vd.c. supply to operate. The module is addressable and will therefore take one address on the loop. Technical Specification Powered 24Vd.c. Temperature Range -10C to 70C Operating Humidity up to 95% RH noncondensing Dimensions 60H x 84W x 14D mm Alarm load max: 24Vd.c. @500mA Product Code (Vol08A-02-D6) 577.001.022 SM520 sounder driver module 577.001.032 SM520/M520 sounder module and cover assembled

SB520 - Sounder Booster Module

The SB520 sounder booster module is used in conjunction with the standard SM520 to drive one or more alarm sounder devices from the addressable loop rather than directly from control panel outputs. The SB520 is required when the alarm sounder load to be driven from the SM520 is greater than 500mA. Using the SB520 increases the sounder load capacity to 15A. The SB520 requires a separate 24Vd.c. supply to operate. The module is not addressable and will therefore not take an address on the loop. Technical Specification Powered: 24Vd.c. Temperature Range: -10C to 70C Operating Humidity: up to 95% RH noncondensing Dimensions: 60H x 84W x 14D mm Alarm load max: 24Vd.c. 15A Product Code (Vol08A-02-D7) 577.001.023 SB520 sounder booster module 577.001.033 SB520/M520 sounder booster module and cover assembled

LPS520 - Loop Powered Sounder Module

The LPS520 module provides control outputs for alarm sounders in the same way as the SM520 module, except that no external power supply is required as the sounders draw their power directly from the addressable loop. A maximum of 4 LPS520 modules can be used per loop, each driving a maximum of 6 Banshee sounders. The LPS520 takes its operating power from the MINERVA loop. The module is addressable and will therefore take one address on the loop. Technical Specification Powered: Loop Temperature Range: -10C to 70C Operating Humidity: up to 95% RH noncondensing Dimensions: 60H x 84W x 14D mm Product Code (Vol08A-02-D19) 577.001.027 LPS520 Loop powered sounder module

Page 12

LPBD521 - Loop Powered Beam Detectors

power the analyser unit, the beam receiver unit and the transmitter unit. Alternatively, two separate LPBD521's can be used with one to power the analyser unit and receiver units and the second to drive the transmitter separately, either from the same loop or a different loop. Up to 8 LPBD521's can be used per loop. The module is addressable and will therefore take one address on the loop. Technical Specification Powered Loop Temperature Range -10C to 70C Operating Humidity up to 95% RH noncondensing Dimensions: 60H x 84W x 14D mm Product Code 557.180.217 LPBD521 loop powered beam detector interface module for use with FireRay 2000 Datasheet - Product Code PSF85 Fireray 2000 Optical Beam Smoke Detector Manual - Vol08A-02-D26 520 Series Ancillary Equipment

The LPBD521 module is used to drive the FireRay 2000 beam detector units directly from the MINERVA loop. A single LPBD521 can be used to

AM921 Addressable Aspirating Interface

The AM921 module is used as an interface between the MINERVA control panel and the LaserPLUS and Scanner aspirating detectors. The module is fitted inside the aspirating detectors housing at the relay output location and also takes its power from the detector unit. The module is addressable and will therefore take one address on the loop. Technical Specification Powered: Loop Temperature Range: -10C to 70C Operating Humidity: up to 95% RH noncondensing Dimensions 921: Fits in VLS/VLP Product Code (Vol08A-02-D33) 546.004.007 AM921 aspirating interface module

PI521 - Plant Interface Module

The Plant Interface module is an addressable, multi input/output device that is used to interface plant equipment to the MINERVA control panel. Inputs can be used for plant monitoring whilst the outputs can be driven from the MINERVA control panel as required. The module is configured in one of three Modes: PI521/2 2 inputs and 2 outputs (Takes 4 addresses on the loop; max per loop is 24) PI521/4 4 inputs and 4 outputs (Takes 8 addresses on the loop; max per loop is 12) PI521/6 6 inputs and 6 outputs (Takes 12 addresses on the loop; max per loop is 8) All outputs are rated at 240V 5A. The PI521 requires a separate 24Vd.c. supply to operate. Technical Specification Powered: 24Vd.c. Temperature Range: -10C to 70C Operating Humidity: up to 95% RH noncondensing Dimensions: 72H x 245W x 23D mm Product Codes (Vol08A-02-D18) 546.004.006 PI521 MINERVA plant interface module 547.004.001 DIN rail mounting kit

SD520 - Smoke Damper Interface Module

The SD520 provides two monitored inputs and one relay output rated at 240V @ 5A. The SD520 is ideally suited to driving smoke damper units directly from the MINERVA loop. One of the inputs can optionally be used to monitor the action of the module relay externally, i.e. at the smoke damper unit. The SD520 is fitted with a red LED to indicate locally when the relay is operated. The SD520 requires a separate 24V d.c. supply to operate. The module is addressable and will therefore take one address on the loop. Technical Specification Powered 24Vd.c. Temperature Range -10C to 70C Operating Humidity up to 95% RH noncondensing Dimensions: 60H x 84W x 14D mm Relay output rating: 240Va.c. @ 5A Product Code (Vol08A-02-D17) 568.001.014 SD520 smoke damper interface module ( 2 inputs and 1 output)

Page 13

SU521 - Shop Interface Module

The SU251 is an addressable, multi input/output device that is used to interface other fire or security systems into the MINERVA control panel. Inputs can be used for taking signals from other systems (e.g. taking individual shop security systems into the central shopping centre system) whilst the outputs can be used to send control signals from the MINERVA back to the individual tenant's system. The SU521 can be configured in one of three formats: SU521/2 2 inputs and 2 outputs (Takes 4 addresses on the loop; max per loop is 24) SU521/4 4 inputs and 4 outputs (Takes 8 addresses on the loop; max per loop is 12) SU521/6 6 inputs and 6 outputs (Takes 12 addresses on the loop; max per loop is 8) All outputs are change-over contacts rated at 24V 1A. The SU521 takes its operating power from the MINERVA loop. Technical Specification Powered: Loop (0.54mA) Temperature Range: -10C to 70C Operating Humidity: up to 95% RH noncondensing Dimensions: 72H x 245W x 17D mm Product Codes (Vol08A-02-D15) 568.001.013 SU521 shop unit interface module 547.004.001 Din rail mounting kit

Ancillary Covers and Housings

557.180.096.T ANC-8 MINERVA ancillary housing Thorn Branded 557.180.095 STK-8 MINERVA ancillary stacking kit for use with ancillary housing 557.180.096 557.180.097.A (Vol08A-02-D18) ANC-3 MINERVA ancillary housing ADT Branded 557.180.097.T (Vol08A-02-D18) ANC-3 MINERVA ancillary housing Thorn Branded (See picture) Product Codes 517.035.007 M520 Ancillary cover for use with M520 modules 557.180.096.A ANC-8 MINERVA ancillary housing ADT Branded

Most M520 modules can be fitted to a double gang MK style backbox using the M520 ancillary cover. Where several devices are mounted in one place the ANC3 houses 3 x M520 modules and the ANC8 houses 8 modules, expandable to 16 using the STK8 stacking kit.

Minerva Loop and Zone Labelling

599.047.004 Label loop D green 599.047.005 Label-loop E grey 599.047.006 Label-loop F blue 599.047.007 Label loop G orange 599.047.008 Label loop H red 599.047.009 Label loop I dark blue 599.047.010 Label loop J black Zone labels are affixed to address labels to produce a combined address/zone label. Product Codes Zone Labels 599.047.011 Label zones 1-16 599.047.012 Label zones 17-32 599.047.013 Label-zones 33-48 599.047.014 Label-zones 49-64 599.047.015 Label-zones 65-80

Round address labels are used for fixing to addressable devices and are provided in 10 different colours to allow differentiation between loop wiring. Product Codes Round Labels 599.047.001 Label loop A white 599.047.002 Label loop B yellow 599.047.003 Label loop C purple

Page 14

Addressable Fire Systems - UL/FM Approved Analogue Addressable TFX-400 Series

any combination. As a stand alone panel, the AUTOCALL TFX-400 meets the needs of any small-to-mid size building or building complex; networking capability allows the TFX-400 to be used in larger buildings or building complexes. Features . 198 Analogue addressable points . Fully upgradable . Ideal for retrofit applications . System status information at a glance . One panel size with many features of larger TFX panels . Compact cabinet fits between wall studs . Cabinet space for up to 17 Amp hour battery . Semiflush or surface mount flexibility . Low cost Features - Options . Remote OCP and virtual front panel . Networking capability . Graphical user interface Listings & Approvals . UL Listed, File S2561 - Local - Local with Releasing Device Service - Auxiliary - Remote Station (Protected Premises Unit) Proprietary (Protected Premises Unit) - Central Station (Protected Premises Unit) - Fire Alarm Control Unit - Proprietary Receiving Unit - Central Station Receiving Unit . CSFM No. 7165-1493:147 7170-1493:167 Technical Specification Note: A U T O C A L L T F X-400 is intended for use within a building interior, free from exposure to moisture, condensation and excessive dust. Operating Temp.: 0 to +49oC Humidity: 85% Non-Condensing Loop Styles: NFPA 72 Style 4 & 6. Line isolators optional for short circuit isolation Max. Add Per Loop: 99 Max Loops per Sys: 2 Operating Voltage: 26Vd.c., 300mA Supervisory Current: 20mA per loop (plus load) 24mA per loop (plus load) Resistance: Max. 75Ohms Capacitance: Max. 0.5 microfarad (mutual) Inductance: Max. 1.5 millihenry (total) Product Codes 557.180.625 TFX400 Two loop UL/FM approved fire control panel. Supplied in grey with Thorn Security branding. 976422 TXF400 Two loop UL/FM approved fire control panel. Supplied in red with Grinnell branding.

TFX400 The AUTOCALL TFX-400 is a self contained, small addressable panel in a single cabinet. The AUTOCALL TFX-400 includes 2 analogue, addressable signalling line circuits that provide 99 points each. The AUTOCALL TFX-400 uses proven technology, used in the TFX-500M and TFX-800M fire alarm and detection systems. The AUTOCALL TFX-400 is designed to be used with conventional or analogue, addressable fire detection devices, in

Analogue Addressable TFX-500/800 Series

Alarm resound by zone or device Modular, expandable Single, dual and multi-channel voice systems, 25 and 70 VRMS . Networking capability to the graphical user interface from any TFX panel. Listings & Approvals . UL 864 Listed for Local, Auxiliary, Remote Station and Proprietary Receiving Station Service; File S2561 . CSFM No. 7165-0062:161 . MEA No. 415-92-E . FM ID No. OX2A8.AY NOTE: AUTOCALL TFX-500M and TFX-800M are intended for use within a building interior, free from exposure to moisture, condensation and excessive dust. Technical Specification Temperature Range: 0oC to 49oC Relative Humidity: 85% Non Condensing Loop Styles: NFPA 72 Style 4 and 6. Line isolators optional for short circuit isolation Max. Add. Per Loop: 99 Max. Loops Per Sys: 2 (TFX-500M) 10 (TFX-800M Voltage: 26Vd.c., 300mA Supervisory Current: 20mA per loop (plus load) Alarm Current: 24mA per loop (plus load) Resistance: Max 75 Ohms Capacitance: Max. 0.5 microfarad (mutual) Inductance: Max. 1.5 millihenry (total) Max. Continuous Dis: 6500 feet Product Codes 557.180.623 TFX-500M 2 loop fire control panel with red architectural door. Grinnell branded in 3 tier housing with FCM/OCM and 16 LED indicator. Supplied complete with 4 shallow backbox. Other colours and branding available on request. 557.180.624 TFX-800M Fire detection panel with red architectural door and Grinnell branding in 7 tier housing with FCM/ODM and 80 LED indicator. Supplied prebuilt complete with 6 backbox. Other colours and branding available on request. Page 15 . . .

557.180.623 Features . Conventional and analogue addressable fire detection . 198 Analogue addressable initiating and output devices plus 1600 discrete inputs or outputs (TFX-500M) . 990 Analogue addressable initiating and output devices plus 1100 discrete inputs or outputs (TFX-800M) . TFX-500M may be expanded to TFX-800M on site . 80 Character LCD display; 40 user defined message characters . Power limited, all circuits . Integral LED zonal or group annunciator . Degrade mode in TFX-800M operates evacuation signals if CPU failure occurs before or during an alarm . Smoke detector condition monitoring with automatic environmental compensation . Individual smoke detector sensitivity selectable from the operator interface . Historical event log for view or print . Fully site programmable . Solo test and alarm verification per group or point . Automatic time control functions with holiday exceptions . Six access levels with unique 0911 Fire Department Access . Automatic and manual detector sensitivity adjustment

557.180.624 The AUTOCALL TFX-500M, TFX-800M, TFX-500MV and TFX-800MV comprise the AUTOCALL TFX family of self contained Fire Alarm Control Panels. CALL TFX-500M provides up to 198 analogue addressable initiating and output devices, while the AUTOCALL TFX-800M expands the capacity to 990 devices. The basic system hardware and software is common for both AUTOCALL TFX500M and TFX-800M, therefore the 500M can be expanded to 800M on site. AUTOCALL TFX controls are designed to be used with conventional or analogue addressable fire detection devices, in any combination thereof. Engineered with advanced microprocessor technology, these fire control panels provide a dynamic level of applications flexibility. The exclusive CONSYS software configuration tool for site specific user programming easily guides the trained installer through a menu prompted decision process.

Remote Operator Control Panel

password protected. Functions available at the ODM include: . Per point annunciation of alarm and trouble events . View and acknowledge events which have not been restored to normal . Force outputs on . View smoke detector analogue values in % obscuration per foot, and perform sensitivity checks, NFPA 72 requirements . View event history log . Isolate zones and points . Enable Solo test mode . Enable maintenance mode . Print status and maintenance reports . Change smoke detector sensitivity The optional 16-indicator module provides field configurable LEDs for annunciation by zone, group, device type or point. Since LEDs are bicoloured (red and yellow), each LED may be configured to annunciate alarm and trouble. Label space is provided with each LED for custom identification. Features . LEDs Fire alarm - red Supervisory - yellow Fault - yellow Isolate - yellow Power-on - green . Enable key switch . Panel silence button and LED - yellow . Alarm Silence button and LED - yellow . System reset button and LED - yellow . Drill button and LED - red . Three programmable LEDs - yellow . Lamp Test . Internal buzzer Features - Optional Fire Control Module . 7 Sockets which accept red, yellow or green LEDs for special requirements Features - Optional Operator Display Module . Alphanumeric display . Numeric touch pad . No/Delete button . Scroll up button . Scroll down button . Yes/Enter button . Quit button . Fast access button Features - Optional 16-Indicator Module . Zone alarm LEDs - red . Zone trouble LEDs - yellow Listings & Approvals . UL File No. S374 . CSFM No. 7165-1493:147 7170-1493:167 . MEA 415-92-E, Vol. IX . FM 3001053 Technical Specification Operating Temp.: 0 to +50oC Operating Humidity: 85% Non-Condensing Current Draw: Standby Current: 50mA (FCM) 32mA (ODM) 9mA (16-IM) Alarm Current: 65mA (FCM) 32mA (ODM) 34mA (16-IM) Product Codes 976402 TFX Remote operator control panel with fire control module (FCM) and operator display module (ODM). 976403 TFX Remote operator control panel with fire control module and 16 indicator LED module (FCM/16IND). 976404 TFX Semi flush backbox for use with all remote operator control panels. 976416 TFX Surface mount backbox for use with any remote operator control panel.

The Remote Operator Control Panel (remote OCP) is designed for use with the AUTOCALL TFX series systems to provide system operating controls at a remote location. The unit is suitable for mounting in lobbies, vestibules or anywhere were space is a premium. Three configurations are available and each are housed in small, attractive units, finished in red with a black faceplate. Each configuration is suitable for indoor semiflush or indoor surface mounting. All remote OCP configurations contain a fire control module (FCM) to duplicate basic fire alarm functions at a remote location. Control buttons with LEDs for panel silence, alarm silence, system reset, and drill are furnished. Labels for each control button may be field customised in languages other than English, or to meet on site requirements. A lamp test button is also provided. LEDs for fire alarm, supervisory, fault and isolate annunciation are furnished. A separate LED for power on indication is also provided. In addition, three programmable LEDs are available for annunciation of programmed actions. The Remote OCP is also available with either an operator display module (ODM) or a 16 indicator module. The optional ODM provides an 80 character, backlit alpha-numeric, LCD operator display. The LCD provides user defined text messages of event type and precise location. An operators keypad allows the user to acknowledge events, make inquiries, and view system status. The real time clock and date settings are set and changed from the keypad as well. All control functions are

TFX Additional User Interface Module

9976130 Product Codes 9976130 TFX 40X2 Indicator with MPIM board. Provides an additional 40X2 zone indicators for use with TFX500M or TFX-800M 9976132 TFX 40 Way status control module and MPIM module for adding to TFX-500M or TFX-800M 9976134 TFX 16 Way status control module with MPIM for use with TFX-500M or TFX-800M

9976132 9976136 TFX 80 Indicator module with one integral MPIM card for use on TFX-800M 9976137 TFX 80 Way Indicator module with 2 MPIM modules built in

9976134

9976136 /997137

TFX Panel Components & Spares

Product Codes 850509 TFX500 & 800M Field wiring guide 940577 TFX/CONSYS Programming cable with DB9 female connector CONSYS software available on document control. Contact Jonathan Gilbert Product Management, Sunbury or Nick Wright Technical Services, Walthamstow 976254 TFX Spare keys for use on TFX OCM and door 976262 TFX SIM Serial interface module provides isolation to serial printers

Page 16

Power Supplies
Features - DCPM . Converts 24Vd.c. to voltages required by the TFX family Features - 500PSM . Provides visual indicators for RPS-424 power supply faults . Mounts directly to RPS-424 power supply . Provides addressable interface to TFX data circuits Listings & Approvals . UL 864 Listed, File No. S2561 . CSFM No.: 7165-1493:147 & 7170-1493:167 (models RPS-424, 500PSM) 7165-1493:162 (model RPS-424) 7170-1493:168 (models DCPM, 500 PSM) . MEA No.: 415-92-E, Vol. VI (models RPS-424, 500PSM and DCPM) OY9A3.AY (models RPS424, 500PSM) OX2A8.AY (model DCPM)

976122 The AUTOCALL Power supplies (models RPS-424 and DCPM) are solid state electronic power supplies which provide filtered regulated DC power to the AUTOCALL TFX series fire alarm system. The RPS-424 converts 120Va.c. primary power to 24Vd.c., 5Vd.c. and 15Vd.c. The DCPM converts 24Vd.c. power from the RPS-424 to the supply voltages necessary for the TFX family. The power supply monitor module (module 500PSM) monitors the RPS-424 and provides visual trouble indication of faults. Features - RPS-424 . Converts 120Va.c. input power to d.c. operating power . Charges and supervises batteries . Automatic transfer to battery during a.c. power failure or brownout . Unique voltage booster feature for notification purposes Technical Specification Dimensions Input Voltage Input Current Output Circuits (for panel connections only)

976040 Product Codes 910683 TFX Spare dual voltage RPS-424 power supply/charger used on all TFX panels 976040 TFX DCPM DC/DC convertor for use as a spare or with additional MPIM modules 976122 TFX 500PSM Power supply monitor module

FM ID No.:

Output Circuits (for field connections only) Output Voltage Supervisory Current Draw Alarm Current Draw

RPS-424 112.5H x 187.5W x 50D mm 120/240Va.c., 50/60Hz 1.5A RMS +24Vd.c.@4A (non resettable)* +24Vd.c.@2A (resettable)* +15Vd.c.@100mA* +5Vd.c.@4A* +24Vd.c.@2A (non resettable)* +24Vd.c.@2A (resettable)* N/A 24Vd.c. regulated (+10%/-5%) 100mA (unloaded) 100mA (unloaded)

500PSM 123.5H x 56.25W x 25D mm 24Vd.c. 62mA N/A N/A N/A N/A +24Vd.c.@4A +12Vd.c.@100mA +5Vd.c.@4A N/A 62mA 62mA

* Total of output circuits must not exceed 5A alarm, 2.5A supervisory

910683

Page 17

Multi Purpose Interface Module

Features . Remote (RS-485) and local bus communication module . Interface to annunciators, printers and Input/Output points . Interface to remote operator display and control panels . Up to 80 input/output points per MPIM . Up to 16 MPIMs on the remote bus . Up to 16 MPIMs on the AUTOCALL TFX-500 series local bus . Up to 11 MPIMs on the AUTOCALL TFX-800 series local bus . May be installed up to 4000 feet remotely from panel Listings & Approvals . UL Listed; File No. S2561 . CSFM No. 7165-1493:147 7170-1493:167 . MEA No. 415-92-E Vol. VI . FM ID No. OX2A8.AY Technical Specification Dimensions: 165H x 91W x 25D mm Operating Temp.: 0oC to +50oC Operating Humidity: 85% (Non Condensing) Operating Voltage: +5Vd.c., +12Vd.c., -12Vd.c. Operating Current: Normal: 19mA Alarm: 24mA Maximum distance from MP-500 (Main Processor Board): Local Bus: 60cm Remote Bus: 2500m Communications Method: Local Bus: Synchronous 1 MBit/sec Remote Bus: RS485, 4800 baud Expansion Bus: Mulitplexed Serial Port: RS232, 4800 Baud Product Code 976015 TFX-MPIM Multi purpose interface module for driving additional LED indicators, status control modules, I/O expansion and printers. Refer to manual for limitations

The AUTOCALL Multi Purpose Interface Module (MPIM) is the communication interface between the AUTOCALL TFX control panel and certain remote system functions. MPIMs communicate with the main processor module through the systems local or remote (RS485) bus. Each MPIM module is assigned a unique bus address by means of programming jumpers. The MPIM mounts in the AUTOCALL TFX panel enclosure, a local or remote AUTOCALL TFX display panel enclosure, or a suitable listed enclosure. It connects to the local or remote bus of an AUTOCALL TFX system.

Loop Expansion Board

Features . Two signalling line circuits . 99 Addressable analogue devices per circuit . Degrade mode operation in the event of main processor board failure Listings & Approvals . UL File No. S2561 . CSFM No. 7165-1493:147 7170-1493:167 . NY MEA No. 415-92-E, Vol. II . FM ID No. JI OX2A8.AY Technical Specification Dimensions: 216H x 153W x 12.5D mm Operating Temp.: 0 to +50oC Operating Humidity: 85% Non-Condensing Input voltage: 5Vd.c., 24Vd.c. (from IAM-800) Operating Current: 50mA Product Codes 976062 TFX IIB-800 Two loop addressable expansion module for use as a spare or expanding the TFX800M to a maximum of 10 loops 976063 TFX IAM-800 Additional/spare motherboard for TFX-800M

976062 AUTOCALLs ALXM Loop Expansion Board (model IIB-800) is used to expand the capacity of the AUTOCALL TFX-800 system. Each board provides two signalling line circuits, each with a capacity of 99 addressable analogue devices, such as smoke detectors, water flow switches, pull stations and supervisory devices. Up to 5 IIB800 boards may be installed in an AUTOCALL TFX series system, for a total of 990 devices. The IIB-800 is an intelligent module. It has its own microprocessor and uses distributed processing techniques for signal processing and analysis. On board non-volatile memory stores the addresses of the devices on each of the two signalling line circuits. In the event of a failure of the AUTOCALL

976063 TFX-800 series main processor board, the IIB-800 is capable of operating indicating appliance modules on the same signalling circuit in which an alarm has occurred, and will signal a common alarm or trouble condition by operating common alarm and trouble relays on the IAM-800 Expansion Motherboard.

Discrete I/O Modules

custom graphic or zonal annunciator and wired to indicating LEDs. The input events which relate to the LED outputs are completely field programmable. These inputs may be alarms, supervisory conditions, general trouble conditions, special trouble conditions such as missing devices or AC power failure, and non-alarm/non-trouble inputs. The XAA-16 provides 8 inputs/8 outputs. Outputs are rated for 6mA at 24Vd.c. (suitable for relays and other 24Vd.c. devices). Total current of all 8 outputs must not exceed 500mA. Features . 16 Contact closure inputs (IAA-16) . Programmable LED driver outputs (OAA-16 and OMA-80) . 8 Contact closure inputs and 8 programmable outputs . LED Outputs user configurable for annunciation by zone, point or user-defined group . 4 System condition LED driver outputs . Up to 4000 feet (2500m) remote from panel Listings & Approvals . UL File No. S2561, all models 1/A IAA-16 . CSFM No. 7165-1493:147 . NY MEA No. 415-92-E, Vol. VI . FM ID No. JI OX2A8.AY OAA-16 . CSFM No. 7165-1493:147 . NY MEA No. 415-92-E, Vol VI . FM ID No. JI OX2A8.AY OMA-80 . CSFM No. 7300-1493:152 . NY MEA No. 415-92-E, Vol. VI Product Codes 976067 TFX IAA-16 Digital input expansion board for use with MPIM 976066 TFX OAA-16 Digital output expansion unit for use with MPIM 976077 TFX OMA-80 Mimic driver PCB for use with MPIM 976098 TFX XAA-16 8 Input and 8 output expansion board for use with MPIM

AUTOCALLs discrete I/O modules are used with the AUTOCALL TFX series systems. The modules include the following model numbers: IAA-16 (XIOM 16 Input Module)), OAA-16 (XIOM 16 Output Module), OMA-80 (Custom Graphic Driver Board) and the XAA-16 (8 Input/8 Output Contact Monitor/Relay Driver Module - XIOM). The IAA-16 XIOM 16 Input Module is used to interface with normally open contact devices such as HVAC fan controls and speaker zone select switches. The OAA-16 and the OMA-80 modules are used in AUTOCALL TFX series systems to annunciate events by a single device or by user defined groups or zones. They are typically installed in a Page 18

Technical Specification IAA-16 141H x 84W x 18.5D mm 0 to +50oC 85% Non-Condensing 5Vd.c. 11mA plus 5mA (per active input) OAA-16 141H x 84W x 18.5D mm 0 to +50oC 85% Non-Condensing 5Vd.c. 11mA plus 10mA (per active output) 10mA OMA-80 231H x 188W x 12.5D mm 0 to +50oC 85% Non-Condensing 5Vd.c. 11mA plus 10mA (per active input) 10mA XAA-16 141H x 84W x 18.5D mm 0 to +50oC 85% Non-Condensing 5Vd.c. 9mA plus 5mA (per configured input plus 50mA per active o/p) 100mA

Dimensions Operating Temperature Operating Humidity Input Voltage from MPIM Input Current Output Current per LED Output Current per output (not current limited)

TFX Fire Alarm System Network

Features . Half duplex, token passing protocol . Peer-to-peer operation . Automatic fault recovery . Field configured baud rates up to 38.4K baud . Asynchronous, 1 stop bit, 8 data bits, no parity . Deterministic performance . Self-configuring . Error detection and recovery . Short circuit isolation at each node . Open/short circuit detection identifies the location of the fault . Nodes automatically disconnect from the network at loss of power and when experiencing a catastrophic failure Features - TFXnet Communications . True peer-to-peer communications, no host or master controller . Node failure does not affect remainder of network . Groups of nodes isolated due to circuit faults continue to communicate within the group . Supported communication media combinations of fibre optic, twisted/shielded pair and twisted/unshielded pair . Supported topologies - combinations of star, bus and ring connections . Token passing non collision (deterministic) communications protocol . Plug-in module (model TLI-530) connects equipment anywhere on the network Features - TFX Panel Operation . Up to 62 AUTOCALL TFX Series fire panels connect to a single TFXnet network; Supports up to 61,380 analogue addressable points; 4960 zones; over 7000 digital I/O points . Panels maintain full stand-alone functionality . Each panel can be configured to respond to events from all or any other sub-set (referred to as sub-net) of other panels . Up to 3 panels can be configured to provide full system annunciation, control and logging; configuring two panels as identical receiving units provides hot-backup of central monitoring equipment . Virtual Front Panel (VFP) feature allows operator interrogation and control of any panel from any other panel . All TFX-500 and TFX-800 features and capabilities are retained . TFX Panels can be configured with integrated single and multiple channel voice and audio evacuation equipment as well as integrated addressable firefighters telephone system Features - Optional Equipment . PC Based graphical user interface (Firegraph) connects directly to the TFX network Listings & Approvals . Rind and redundant path star topologies meet NFPA 72 Class A, Style 7 signalling circuit standards . Bus and single path star topologies meet NFPA 72 Class B, Style 4 signalling circuit standards . All equipment is UL listed (864) (UOJZ) for NFPA 72 local, auxiliary, remote and propriety signalling services (UL File No. S2561) . CSFM No. 7170-1493:167 . MEA No. 415-92-E, Vol. VI Product Codes 976165 TLI-530 Module kit for use on TFX-Net only 976166 TLO-530 Board kit for use with TFX-Net

TFXnet is a collection of network interface modules and peripheral equipment that together form a robust, fault resilient and flexible peer-topeer communications network. Operation TFXnet employs a token passing communications protocol that treats each node equally. Loss of one or more nodes does not affect operation of the remainder of the network. The network will automatically re-configure when a node is inserted or removed. Data is regenerated at each node with a minimum delay (1/2 bit time). This provides maximum distance between nodes and isolation of signalling circuits between nodes without impacting data throughput. Isolation ensures that a short/open condition on a circuit between any two nodes does not affect other circuits. In the event that groups of nodes are isolated from the remainder of the network, due to one or more circuit faults, each group will automatically re-configure communications and continue to inter-operate. When the fault condition is restored, the network will re-configure and total communications will commence.

End of Line Assembly

This unit is used with alarm signal circuits of main processor. Product Code 976016 TFX IAS-500 End of line (EOL) assembly

Page 19

AUTOCALL CAA-500LI Module

circuit. On a Style 6 circuit, this causes a shorted section between two CAA-500LI modules to be isolated from the rest of the loop. The AUTOCALL TFX panel indicates which devices in the loop have been isolated, to assist in locating and correcting the short circuit condition. Once the short circuit has been cleared, the CAA-500LI automatically resets, and communication with the isolated devices is restored. Features . Isolates short circuits on signalling circuit to prevent failure of entire circuit . Automatically resets on correction of short circuit . Status LED indicates short circuit detection . No external power required . High EMF/RFI noise immunity . May be configured to meet NFPA style 7 requirements Listings & Approvals . UL File Number S374 . CSFM No. 7300-1493:152 . MEA No. 415-92-E Vol. VI . FM ID No. OX2A8.AY Technical Specification Dimensions: 112.5H x 112.5W x 25D mm Operating Temp.: 0oC to 50oC Operating Humidity: 85% (Non Condensing) Operating Voltage: 28Vd.c. maximum Signalling Circuit Current: Standby Current: 0.7mA Alarm Current: 0.7mA Cover Material: Polycarbonate ABS Alloy Product Code 976026 TFX CAA-500LI Line isolator module complete with 2 gang mounting plate

The AUTOCALL CAA-500LI module is used only with the AUTOCALL TFX fire control panels to detect and isolate short circuits. This module should be installed between groups of addressable devices to prevent failure of the entire signalling circuit loop in the event of a short circuit. Upon detection of a short circuit, this module opens up the positive leg of the signalling

Addressable Contact Monitor Modules

status of its initiating circuit. The LED latches steady on alarm. These modules may be programmed to report inputs as either alarm or supervisory conditions. Another programming option invokes a special polling interrupt routing, resulting in quicker alarm response than systems which rely on simple polling techniques to detect an alarm. IXA-500CMA The IXA-500CMA provides a Style B or D initiating circuit and mounts on a standard 2-gang electrical box. An attractive plastic cover with eggshell finish is included. An LED is visible through an opening in the plastic cover and illuminates steadily during alarm. The IXA-500CMA may be programmed to monitor normally open or normally closed contact devices. IXA-501CM The IXA-501CM mini module provides a Style B initiating circuit. Its compact size makes it ideal for placement inside a standard electrical box behind the monitored contact device, such as a pullstation. Features . Supervises and monitors dry contact devices . Normally open and normally closed programmable options (IXA-500CMA) . IXA-501CM Fits inside standard electrical box . IXA-500CMA Mounts on standard 2 gang electrical box . High EMF/RFI noise immunity . Powered directly by signalling circuit (no additional power required) . Programmable for normal or fast (polling interrupt) alarm reporting Listings & Approvals . UL File No. S374 . CSFM No. 7300-1493:152 . MEA No. 415-92-E Vol. VI . FM ID No. OX2A8.AY Product Codes 976081 TFX IXA-501CM Addressable mini contact module 976092 TFX IXA-500CMA Addressable contact module complete with US double gang mounting plate

The AUTOCALL contact monitor modules IXA500CMA (Style B & D)and IXA-501CM (mini module) provide an initiating zone suitable for contact devices such as pull stations, waterflow switches and sprinkler supervisory devices. Each module reports and input from any contact device in its zone as a single address to the AUTOCALL TFX series systems. Each contact monitor module uses one of 126 available addresses on an AUTOCALL TFX signalling circuit. It responds to regular polls from the control panel and reports its type and the Technical Specification Dimensions Operating Temperature Operating Humidity Operating Voltage Signalling Circuit Current: Standby Current Alarm Current Initiating Circuit Wiring Resistance Cover Material

IXA-500CMA 122.5H x 122.5W x 25D mm 0oC to 50oC 85% (Non condensing) 28Vd.c. 0.18mA maximum 0.18mA maximum 10 Ohms maximum Polycarbonate ABS Alloy

IXA-501CM 37.5H x 35W x 12.5D mm 0oC to 50oC 85% (Non condensing) 28Vd.c. 0.18mA maximum 0.18mA maximum 10 Ohms maximum N/A

Addressable Detector Monitor Module

of its initiating circuit. This module contains bicoloured LEDs (red for alarm and yellow for fault). Features . Supervises and monitors two wire smoke and heat detectors . Supervises 24Vd.c. detector power on two wire loop . Resets detectors on command from control panel . Style B and D initiating circuits . Contains Bi-coloured LEDs to display alarm/ fault status . High EMF/RFI noise immunity Listings & Approvals . UL File No. S374 . CSFM No. 7300-1493:152 . MEA No. 415-92-E, Vol. 6 . FM ID No. OX2A8.AY Technical Specification Dimensions: 112.5H x 112.5W x 25D mm Operating Temp.: 0 to +50oC Operating Humidity: 85% Non-Condensing Operating Voltage: Signalling Circuit: 28Vd.c. Max. External Power: 24Vd.c. Signalling Circuit Current: Stand-by Current: 0.18mA Alarm Current: 0.18mA External 24Vd.c. Power: Stand-by Current: 18mA Trouble Current: 26mA Alarm Current: 74mA Max. Initiating Current Voltage: 16.9 to 22.2Vd.c. Initiating Circuit Ripple Voltage: 500mV p-p Max. Initiating Circuit Wiring Resistance: 25 Ohms Cover Material: Polycarbonate ABS Alloy Product Code 976093 TFX IXA-500DMA Addressable detector zone interface module complete with double gang. US mounting plate

The AUTOCALL Addressable detector monitor module IXA-500DMA, provides an initiating zone suitable for compatible two wire smoke and heat detectors. Each module reports an input from any detector in its initiating circuit as a single address to the AUTOCALL TFX series system. Up to 20 detectors can be connected to the initiating circuit, depending on the specific detectors used. Each detector monitor module uses one of 126 available addresses on an AUTOCALL TFX signalling circuit. It responds to regular polls from the control panel and reports its type and the state Page 20

OXA-502RM - Addressable Relay Module

Each relay monitor module uses one of 126 available addresses on the AUTOCALL TFX signalling circuit. It responds to regular polls from the control panel and reports its type and status. A flashing LED indicates that the module is in communication with the control panel. Up to 99 modules can be placed on an individual circuit. The OXA-502RM is an addressable field module and is provided with an attractive plastic cover with eggshell finish. The status LED is visible through the plastic cover. Features . Provides one Form C programmable relay contact . Monitored and controlled from a signalling line circuit (addressable loop) . Powered by signalling line circuit. No external power . LED indicates relay operation . High EMF/RFI noise immunity Listings & Approvals . UL Listed: File No. S2561 . CSFM No. 7300-1493:152 . MEA No. 415-92-E Vol. VI . FM ID No. OB2A9.AY Technical Specification Dimensions: 113H x 113W x 33D mm Operating Temp.: 0oC to +50oC Operating Humidity: 85% (Non Condensing) Relay Contact Rating: 2A @ 24Vd.c, 0.6A @ 120Va.c. Addressable Loop Current: Standby Current: 0.18mA Alarm Current: 0.18mA Cover Material: Polycarbonate ABS alloy Product Code 976258 TFX OXA-502RM Addressable relay module complete with US double gang mounting plate

The AUTOCALL OXA-502RM module provides a form C relay contact for annunciation and auxiliary control purposes with the AUTOCALL TFX series fire alarm system. Both are monitored and controlled as an addressable device on an AUTOCALL TFX system signalling line circuit. The relay contact may be programmed to operate in conjunction with any single or group of input events.

Multi Detector Monitor Module

individually addressable. The module is compatible with 2-wire or 4-wire, UL listed, low voltage, conventional, point type detectors or normally open contact initiating devices. Up to 30 detectors may be connected to each initiating circuit, depending upon the specific detector used. Each zone on the MDM521 has a latching, red LED to provide indication of an alarm condition. Resettable 24Vd.c. is provided for using four wire detectors. Features . Supervises and monitors two-wire or 4-wire smoke detectors . Resets detectors on command from control panel . Eight Style B initiating circuits . Contains LEDs to display alarm status Listings & Approvals . UL Listed; File No. S2561 . CSFM No. 7165-1493:147 7170-1493:167 7300-1493:152 . MEA No. 415-92-E, Vol. IX Product Code 976375 TFX MDM/521 Addressable multi way conventional detection zone interface for 1-8 zones

The Multi Detector Monitor Module (MDM521) connects zones of conventional 24Vd.c. detectors and interfaces them to the AUTOCALL TFX series fire alarm system. The MDM521 provides eight Style B, Class B zones. The Multi Detector Monitor Module fully monitors each initiating circuit of conventional 24Vd.c. detectors and signals the control panel upon alarm, open circuit fault, or power supply fault. Each zone reports as a single address to the AUTOCALL TFX series control panel, however, the detectors in these conventional zones are not

Notification Appliance Module

other 506SDAs. The 506SDA is an addressable field module and is provided with an attractive plastic cover with eggshell finish. An LED is visible through an opening in the plastic cover. Features . Provides a Style Y or Style Z, audio or d.c., notification appliance circuit . LED annunciation at each device for normal, activated and trouble conditions . Supervises 24Vd.c. appliance power without the need for a supervisory relay . 2 Amp output rating . Silenceable and non-silenceable operation . High EMF/RFI noise immunity . Will not operate into a short circuit fault . Plug-in power limiting option Listing & Approvals . UL Category UOXX, File No. S374 . CSFM No. 7165-1493:147 7300-1493:152 7170-1493:167 . MEA No. 415-92-E Vol. XI Technical Specification Dimensions: 112.5H x 112.5W x 31D mm Operating Temp.: 0 to +50oC Operating Humidity: 85% Non-Condensing Notification Circuit Rating: 2.0Amp Max., 24Vd.c. 50 Watts, 25VRMS audio 50 Watts, 70VRMS audio Addressable Loop Current: Standby Current: 0.35mA Alarm Current: 0.35mA External 24Vd.c. Power: Any UL listed supply, compatible with the connected notification appliances Standby Current: 0.08mA Alarm Current: 0.08mA (Plus current used by connected notification appliances) Cover Material: Polycarbonate ABS Alloy Product Codes 976378 TFX 506SDA Addressable sounder/notification device output module complete with US double gang mounting plate. Used for switching sounder and speaker circuits 976250 Spare TFX 27K 1W Resistors for use with 505/6SDA 910683 TFX Spare dual voltage RPS-424 power supply/charger used on all TFX panels

976378 The AUTOCALL 506SDA notification appliance modules is used to activate notification appliances in response to a command sent from the fire control panel. The 506SDA works in conjunction with the AUTOCALL TFX series fire alarm system, and CONSYS Issue 3.0 and above. The notification appliance circuit is supervised and may be configured as an NFPA 72 Style Z or Style Y circuit. The AUTOCALL 506SDA may be powered from either an audio source or a separate power supply that is UL listed for fire signalling applications. When the 506SDA is used with the UL listed RPS424 power supply (910683), or any other power limited input source that is UL listed for fire signalling applications, the output is power limited. The 506SDA will not operate into a short circuit fault condition. This ensures the operation of all other devices during an alarm condition including

Page 21

Pullstations & Ancillaries

Hazardous Locations The RMS series of pull stations are constructed of high strength metal die cast alloy. The UL rating of Class I Group B (Hydrogen) C & D, Class II Groups E, F, G, Class III and outdoor rating of type 4X, allows these stations to offer unmatched placement flexibility. The terminal block connections, D.P .D.T contacts @ 10 amps meet most electrical requirements. Having a conventional pull station design the RMS series stations offer easy identification. Features . Die cast metal construction . Low profile functional design . Dual action option . Institutional (Key operated) option . Explosion proof option . Break glass option . Weatherproof option . Hex screw or key lock reset options . UL Listed Technical Specification Dimensions: 118H x 83W x 37D mm (RMS-1T) Weight: 560g (RMS-1T) Contact: Single pole, single throw (double pole, single throw optional) Contact Rating: 10 Amps @ 125/250Va.c. Wire AWG: 12 to 22 AWG Wiring: Terminal block connections (6-32 w/sem plate) Switch: 10 Amp @ 120Va.c. Key Switch: (pre-signal) 0.5 Amp 30Vd.c. Product Code 960673 TFX RMS-1T Single action non addressable pull station

The RMS series of manual pull stations are of high quality non-toxic die-cast construction. Low profile and smooth edges offer an attractive yet functional design. All components are prepainted or have plated surfaces to inhibit corrosion. The RMS series of manual pullstations have a 10 amp snap action switch. They can be used with or without a break glass rod for positive indication that the unit has been operated.

Addressable Manual Stations

corrosion. The RMS series of manual pull stations have a 10A snap action switch. All stations can be used with or without a breakglass rod (included) for positive indication that the unit has been operated. Programming with CONSYS allows an addressable manual station to be automatically programmed for fast response that invokes a special polling interrupt routine. This results in a one second alarm response. Systems which rely on simple polling techniques to detect an alarm can take longer to report manual alarms. Features . Die cast metal construction . Low profile functional design . Terminals for field wiring . Powered directly by signalling circuit (no additional power required) . Programmable for normal or fast alarm reporting . Optional dual action . Optional break glass . Optional hex screw or key lock reset Listings & Approvals . UL Listed; File No. S165 . CSFM No. 7150-1493-156 Technical Specification Dimensions: 118.75H x 80W x 22D mm Wire AWG: 12 to 22 AWG Wiring: Terminal block connections Product Codes 976277 TFX IXA-RMS Addressable indoor pullstation for use on TFX panels 960687 TFX Surface mount backbox for use with RMS pullstations 960684 TFX Spare glass rod for use with RMS pullstations

The AUTOCALL IXA-RMS series of manual pullstations are of high quality, non toxic, diecast construction and connect directly to the AUTOCALL TFX system. Using one of 126 available addresses on the loop, each station responds to regular polls from the control panel and reports its type and status. Low profile and smooth edges offer an attractive yet functional design. All components are pre painted or have plated surfaces to inhibit

Notification Appliances - Motor Types

mounted in standard outlet boxes or 4 x 4 junction boxes. All are specifically designed for use with fire alarm systems and are UL listed. UL Spherical dB Measurement Sound level measurements are made in accordance with UL Test Standard 464. The audible device is wall mounted in a reverberant room and sound power output is measured at various points along a 10 radium from the wall (i.e. the spherical dB measurement represents an average of several readings taken along a 180 arc, 10 feet from the bell). Indoor Measurement Sound level in the indoor installation may vary depending upon room size and acoustical loading. Product Code 508722 K-MP-6P 6 UL Bell 30mA 85dB

508722 These alarm bells are ideal warning devices for schools, stores, public buildings and any other location with low to moderate ambient noise levels. These alarm bells are completely enclosed in an aluminium die cast housing with red enamelled steel gongs. These alarm bells can be Technical Specification Product Code Vibrating Type Rated Voltage Polarised 508722 24Vd.c.

Size (Inches) 6

Rated Current 0.03A

Starting Voltage 12V

UL Spherical dB Measurement 84

Indoor Measurement 86-89

Page 22

Conventional Fire Alarm Panels - BS5839 and EN54 CB200 (Conventional Control Panel)
termination. The surface-mount electronics motherboard is fitted and terminated after the first fix installation and finally a terminal cover completes the panel installation. Panels are boxed complete with a three-sticker set allowing user selection and application on site. CB200 Panel Enhancements The CB200 panel may be enhanced to provide additional facilities. The new CB200 range of conventional fire panels, are low cost - high quality panels which provide an excellent product solution to meet the differing needs of todays diversified marketplace. The slimline CB200 is specifically intended for use on simpler, low cost fire alarm installations where it currently holds a dominant market position. The CB200 high quality - low cost conventional panel range is housed in a compact aesthetically appealing polycarbonate enclosure designed for versatility hence allowing for surface or semi-flush mounting. Each panel in this series issimple to install, program and operate, as reported by satisfied installation engineers and critical end-users. A comprehensive range of technically detailed, support documentation relating to commissioning, operating, maintenance and fault finding is easily available if required. Technical Information The CB 200 conventional fire panel may be supplied in 1 or 2 zone format. All zones and alarm circuits are monitored for open and short circuit fault conditions with detector removal facility provided as standard. The cabinet will house 2 x 12V 2.1 Ah S.L.A batteries wired in series. Comprehensive user controls, including the ability to isolate each zone, assist in the prevention of unwanted alarms during periods of building maintenance or refurbishment. A slide-in insert is included for clear zone identification. The electronics motherboard has been designed using the latest technology, thus providing maximum reliability in a compact format. The cabinet back-box houses only the transformer, thus providing a virtually empty enclosure for first fix installation. A steel gland plate, removable plastic grommets and ample space are designed to assist with cable The C1437 alarm module provides the facility to split and control one alarm input into four independent, fully monitored alarm output circuits. The C1437 has open & short circuit fault monitoring on all alarm circuits (complete with LED indication). Connection between the panel and the C1437 board is monitored for open and short circuit faults. Note If panel enhancements are required, the enhancement boards must be ordered complete with suitable enhancement enclosure and panel. Enhancement boards and enclosures cannot be ordered as individual component items. Features Built-in detector removal indication facility Available in 1 or 2 zone format One-man test facility Removable cable entry grommets Compact and stylish design Surface or Semi-Flush Mounting User friendly controls Ample termination space Poly carbonate enclosure Supplied with log book/manual Complies with EMC and LVD Directives Enhancement Enclosures 2500/220 Enclosure c/w 1A PSU & space for 4 x C1437 and 2 x C1466 & 6.2AH battery set. Cabinet size - 380H x 600W x 210D mm. 2500/221 Enclosure c/w 3A PSU & space for 2 x C1324 or 4 x C1437 boards. Cabinet size - 380H x 600W x 210D mm.

2500/222 Enclosure c/w 5A PSU & space for 2 x C1324 or 4 x C1437 boards. Cabinet size - 380H x 600W x 210D mm.

Panel Dimensions Height: Width: Depth: 245 mm 313 mm 92 mm

Product Codes 2500/021 CB200 1 zone conventional control panel, CE Marked, space for 2Ah battery set (2 x 12V) 2500/022 CB200 2 zone conventional control panel, CE Marked, space for 2 Ah battery set (2 x 12V) Panel Enhancement Boards 2500/032 C1437 4 way alarm extender board. 2500/034 C1466 1 x double pole relay board (1A contacts - PCB only)

Page 23

System 1700 (Conventional Control Panel)

A uniquely flexible series of basic fire controllers. Covering 4 or more zones of fire detection and suitable for cost effective protection in a wide range of building types. Detection, display, alarm, and extinguishing control, can be tailored to meet any need. Technical Information System 1700 consists of a number of standard modules, selectively assembled in one of 5 housings which can be flush mounted using the appropriate kit - to meet any specific customer requirement within the designed capacity. These units can be configured to provide fire detection with local display, remote display, extinguishing control or any combination of these functions with integral power units and secondary batteries or from separate 24Vd.c. power supplies. Alarm sounder outputs can be commissioned or preprogrammed for specific building sectors. Conventional style monitored detector zones, each consisting of up to 20 standard smoke, heat detectors or callpoints. Remote display or control are driven by a multiplex transmitter/receiver system on a single pair cable. Each transmitter can feed up to 4 receivers, at a distance of up to 1Km. Display legends are replaceable. Standard legend is English or on the reverse Arabic/English, but blanks are available to suit other customer requirements. Features Expandable in four zone increments Customised by module selection - uniquely flexible Integral battery and charger Simple controls Local and remote displays Easy installation and extension Selective sounder operation All circuits fault monitored Remote signalling output Designed for fire alarm systems specified to BS5839: Part 1:1988 Proven exceptionally reliable world-wide Datasheet - Product Code PSF41 System 1700 Conventional Fire Controller Manual - 02A-02-D1 Fire Detection Manual

Alarm Module with Display

The Alarm Module with Display is the central control unit driving the sounders and auxiliaries. The display indicates Power On, Fire or Fault, and has push-button switches for Evacuate, Silence, Reset and Lamp Test enabled by a key-switch. The module also has an integral fire/fault sounder. Product Codes 508.014.020 1700 Alarm PCB & Display (see picture) 508.014.050 1700 Alarm Unit Display Dutch TNO 508.014.055 System 1700 Spare Key

Integral Power Modules

There are two versions available:- 1.5A or 3.0A suitable for powering the system and recharging integral sealed lead-acid batteries. The power modules are available to suit 110Va.c. or 240Va.c. mains supply. Product Codes 508.014.032 1700 1.5 Amp 240V PSU 508.014.033 1700 3 Amp 240V PSU 508.014.036 1700 1.5 Amp 115V PSU 508.014.037 1700 3 Amp 115V PSU

External Power Interface Module

Fitted internally this module monitors a suitable 24Vd.c. supply. The module monitors the external power supply for any fault condition signalled. The module should be used with an external power supply when Nickel-Cadmium batteries are specified. Product Code 508.014.031 1700 External Power Interface PCB

Page 24

Four or Eight Zone Module with Display

This module provides the power to each detection zone which respond to four conditions, open-circuit fault, quiescent, alarm or short-circuit fault. Individual indication is given for either Alarm or Fault. Each zone has a corresponding output which is energised in an alarm condition and is suitable for driving zonal relays and/or auxiliary modules i.e. multiplexed repeater.

508.014.023 1700 4 Zone PCB & Display

508.014.024 1700 8 Zone PCB & Display

Relay Module
Mounted internally this module has 4 heavy duty relays each with a single changeover contact (rated 5A @ 30Vd.c.). The relays are normally energised from the individual zone outputs of the zone module. Product Code 508.014.028 1700 Relay PCB

Sector Sounder Module

This module allows up to 4 groups of sounders to be activated in a pre-programmed response from up to 10 zones of detection. Each group can be programmed to respond in either pulsing or continuous output. Each output is fused at 1A @24Vd.c. Product Code 508.014.026 1700 Sector Sounder PCB

Sounder Booster Module

This module allows for extra power to be supplied to a sounder circuit. It is normally used when large numbers of sounders are required in one circuit or where long distances create volt-drop problems. Additional current is 1.5A . Product Code 508.014.027 1700 Sounder Extension PCB

Page 25

Multiplex Transmitter Module

This module transmits up to 16 independent signals plus common alarm or fault to up to 4 multiplex receiver modules at remote locations over a pair of signal wires (max. length 1 Km). Product Code 508.014.029 1700 Multiplex TX PCB

Multiplex Receiver Module

This module receives and encodes the signals from a multiplex transmitter module. The outputs can be used to drive either a Repeater display module, Mimic indicators etc. Product Code 508.014.030 1700 Multiplex RX PCB

Repeater Display Module

These modules display the information from the Multiplex receiver module. The Remote Alarm display provides indication of Fire, Fault, and Power On together with Silence and Lamp Test facilities. The Repeater Display module provides up to 16 Fire indications. Product Codes 508.014.021 1700 Alarm Repeater Display 508.014.022 1700 16 Zone Repeater Display

Extinguishing Module and Display

This module provides for complete control of a gaseous extinguishing system. The input commands are taken from the coincident zonal outputs. The module also has an independent Manual Release facility and has indicators for Manual-Automatic mode, Gas Released and Disabled conditions together with a key switch for mode selection. The module has facilities for extensive electrical fault monitoring, cylinder pressure monitoring, and an adjustable timedelay before gas release. Product Code 508.014.056 1700 Extinguishing Control PCB and Display

Page 26

Coincidence Module
This module is designed to activate one or both relays in response to an alarm condition from up to eight zonal outputs. This module is primarily used in conjunction with the extinguishing module, but may also be used for other applications. Product Code 508.014.048 1700 Coincidence Module PCB

Housings
Technical Specification ADT 508.014.011.A 508.014.013.A Thorn 508.014.011.T 508.014.013.T Housing 2 Aperture 3 Aperture 5 Aperture 8 Aperture Height 354 354 354 760 Dimensions (mm) Width Depth 336 133 420 193 637 531 193 233 Weight (Kg) 5 7 9.5 14.5 Display Capacity 2H 1V + 2H 1V + 4H 8H Module Space 2 4 6 10

508.014.015.A 508.014.015.T 508.014.039.A 508.014.039.T H = Horizontal V= Vertical

As standard the System 1700 enclosures are available with Thorn or ADT Branding. A bezel kit is available for flush mounting the panels Product Codes 508.014.047 1700 Installation Kit For 3 Aperture Housing 508.014.038 1700 Installation Kit For 5 Aperture Housing

Housing Accessories 508.014.019 1700 Aperture Blanking Plate 508.014.035 1700 Custom Legend Strips, Blank System 1700 Battery Clamp Kits 508.014.053 1700 Battery Clamp Kit For 10Ah Batteries

508.014.011.A 1700 2 Aperture

508.014.013.A 1700 3 Aperture

508.014.015.A 1700 5 Aperture

508.014.039.A 1700 8 Aperture

Page 27

NT100 Conventional Controllers

Standard Fire Control Panel Country NT108 U.K. Spain Belgium Holland Country Finland Denmark Holland 508.022.008 508.022.009 Standard Fire Repeater Panel NT116 NT116R 508.022.016 508.022.019 508.022.017 508.022.038 508.022.044

508.022.010 508.022.018 Fire Panels with Integral Firemans Interface NTF08 NTF16 508.022.011 508.022.029 508.022.014 508.022.042 508.022.043 509.022.013 NT Flush Mount Bezel Ancillaries 509.022.035 NT/NTR/NTF CPU Board V1.9 Spare 509.022.033 NT/NTR/NTF Display PCB square

The range of NT100 panels are state-of-the-art intelligent fire panels, which provide many of the features normally only found on more expensive analogue addressable panels. The range of control panels are LPCB approved to EN54Pt. 2 and 4 and include many local approval authorities around the world. The panels are supplied in 8 and 16 zone versions. Each detection zone can support up to 32 conventional detectors. The user interface is provided through a combination of LEDs and a 2 x 40 character LCD display. The LCD display provides a full customer definable text display of the alarm or fault condition whilst also displaying zones in alarm, fault or isolate status. The display also indicates the outputs that have been activated. Each control panel can have up to a maximum of 3 repeaters. Features LPCB & ANPI (BOSEC) approved to EN54 Parts 2 and 4 Customer friendly, multi language information on LCD display Comprehensive fault diagnostics 8 and 16 zone Panels Can be used with a wide range of approved detectors Detector removal monitoring 4 monitored Sounder outputs up to 4A 4 monitored Relay outputs 3 programmable auxiliary inputs 3 levels of alarm discriminations per zone One common fault relay Internal batteries (up to 12Ah) Programmable cause and effect Programmable user access levels Can interface to intrinsically safe System 601 Manned/ unmanned mode Optional fireman's interface Optional printer Optional repeater units Optional I/O expansion board 16 digital outputs or 16 relay output options Technical Specification Dimensions 320H x 430W x150D mm Weight 6.3kg Power Supply 198 -264Va.c. Quiescent Current 50mA @ 24Vd.c. Alarm Current 1Amp @ 24Vd.c. Operating Temp 0 to +40C Operating Humidity 0-90% RH non-condensing Datasheet - Product Code PSF95 NT Fire Control Panels

Product Codes The following product codes include all the optional extras which can be included as part of your customer's requirements. Additional spare parts are also included. 509.022.001 NT100 Series Spare Commissioning Kit Included With All Panels 509.022.008 PRN-02 Spare Printer Paper For PRN-01 (Supplied one per pack) 509.022.011 NT100 Spare PSU For NT,NTR & NTF Variants

General Wiring Diagram

Up to 3 repeaters

Page 28

509.022.004 NTX-02 16 Way Relay Output Board (24Vd.c.@1A) Requires NTX-01 Expansion Board

509.022.005 NTX-03 16 Way Digital Output Driver Board Requires NTX-01 Expansion Board

509.022.007 PRN-01 Optional Integral Printer for use with NT & NTF Controller Variants

509.022.003 NTX-01 4 Way Expansion Board - Supplied Fitted to the NTF And NTR Controllers. Also Supports NTX-02,03,04 Expansion Boards

509.022.006 NTX-04 16 Way Digital Input Board for use on Special NT Controller Variants only

NTR100 Conventional Extinguishing Controllers

display. The LCD display provides a full customer definable text display of the alarm or fault condition whilst also displaying zones in alarm, fault or isolate status. The display also indicates the outputs that have been activated. Features ANPI (BOSEC) Approved Customer friendly, multi language information on LCD display Comprehensive fault diagnostics Manual release zone - direct to stage 2 Can be used with a wide range of approved detectors Detector removal monitoring 2 monitored Sounder outputs up to 4A 2 monitored Solenoid circuits 4 monitored Relay outputs 3 programmable auxiliary inputs 3 levels of alarm discriminations per zone One common fault relay Internal batteries (up to 12Ah) Programmable cause and effect Programmable user access levels Can interface to intrinsically safe System 601 High and Low pressure monitoring Initial/Reserve changeover facility Optional Door Interlock Optional remote hold and abort Optional Auto/Manual key switches Optional I/O expansion board Product Codes The following product codes include all the optional extras which can be included as part of your customer's requirements. Additional spare parts are also included. 509.022.001 NT100 Series Spare Commissioning Kit Included With All Panels 509.022.007 PRN-01 Optional Integral Printer For Use With All NT Controller Variants 509.022.008 PRN-02 Spare Printer Paper For PRN-01 supplied one per pack. 16 digital outputs or 16 relay output options Technical Specification Dimensions 320H x 430W x 150D mm Weight 6.3kg Power Supply 198 -264Va.c. Quiescent Current 50mA @ 24Vd.c. Alarm Current 1Amp @ 24Vd.c. Operating Temp 0 to +40C Operating Humidity 0-90% RH non-condensing Note: The NTR is compatible with the T500 range of ancillaries. Product Codes NTR-08 NTR-16 Single Area Dual Area UK 508.022.003 Belgian 508.022.004 Dutch 508.022.021 Danish 508.022.006 508.022.02 5 Finnish 508.022.001 508.022.02 2 Norwegian 508.022.023 Swedish 508.022.002 Datasheet - Product Code PSF106 NTR Intelligent Release Panels

The range of NTR gas release panels are state-ofthe-art intelligent panels, which enable a wide variety of gas release applications to be implemented. The panel is provided with default settings to suit most INERGEN , FM200 and CO2 applications and can be programmed to suit most other gas releasing applications. For compatibility with latest standards the panel complies with all relevant parts of EN54 part 2 and 4. The NTR panel is designed to comply with BS7273 and can be installed to fully comply with BS5839 Pt 1 and BS6266. System Operation (Default UK Operation) Stage 1 - The panel stays in Stage1 Fire Alarm until the fire or false alarm source is removed and the panel is reset or Stage 2 ensues. Stage 2 - The panel stays in Stage 2 for 30 seconds (adjustable) to provide a Pre-release Warning during which time the HOLD or ABORT sequences can be initiated. Stage 3 - The panel remains in Stage 3 Gas Release for the solenoid firing time or until the release confirmation is received from the High Pressure Switch. Stage 4 - The panel remains in the Fire Alarm condition and indicates the gas released message until the system is silenced and reset. Failure to receive a release confirmation will initiate a fault. The user interface is provided through a combination of LEDs and a 2 x 40 character LCD

509.022.011 NT100 Spare PSU For NT,NTR & NTF Variants 509.022.013 NT Flush Mount Bezel 509.022.033 NT/NTR/NTF Display PCB Spare

Page 29

NTR - Typical Wiring Schematic for Single Area P

anels

PRESSURESWITCHES

Typical Extinguishing Gas Release Applications

Extinguishant Schematic Configuration with Extinguishant Solenoid Extinguishant Schematic Configuration with Pilot Container Solenoid

Extinguishant Initial/Reserve Schematic with Pilot Container Solenoid

Extinguishant Initial/Reserve Schematic with

Extinguishant Solenoid

Page 30

MXCE Conventional Fire Detection & Extinguishing Controller

Terminations that suit up to 2.5mm2 CSA cable Power Supply The power supply is designed to comply with the latest standard (EN54 pt4). The internal mains PSU provides all power plus charging and monitoring of the 2 x 12V lead acid batteries (up to 7 Ah). 1.8A PSU/Charger Panel battery capacity - 2 x 7Ah batteries internally Panel Functions Coincidence operation zones 1 and 2 Optional coincidence operation on zones 3 and 4(T550) Auto/Manual select 2-wire sounders (on the detection zones) Inputs and Outputs 2 or 4 zones First stage sounders (sounder circuit 1 and 2wire sounders) Second stage sounders (sounder circuit 2) Mode-select Auto/Manual input Extinguishing Disable input Hold button input Abort button input High and low pressure extinguishant monitor inputs Manual electrical release input Signalling fault monitor The following additional Inputs/Outputs are available on the T550 Fire and fault relays Mode select/status indication Mimic inputs (silence/reset/evacuate) Door interlocks MXC-DIGI A uniquely designed plug-in digital dialler which fits inside the panel and provides fire, fire test and fault signalling. Sounders Each MXCE zone can support up to sixteen Tyco 2-wire sounders, which can be any combination of Tyco 602SBD sounder base units or wall mounted Symphoni Sounders. Panel Features Available in 2 and 4 zone variants Operates with Tyco 600 Series Conventional Detectors All zones supports Tyco 2-wire sounders 4 zones variant offers extinguishing coincidence functionality on zones 3 & 4 T550 supports up to 3 x T56x Series of remote Status Indicators Uniquely supports plug-in Central Station communicator within the panel unit Designed to comply with BS7273 and EN54 pts 2 &4 Can be installed to meet the requirements of BS5839 pt1 MXCE LED display replaces T530 filaments reduces associated maintenance and time costs Aesthetically pleasing design - 332W x 240H x 100D (mm). Product Codes 508.030.501 MXCE T540 2 zone conventional extinguishing controller 508.030.502 MXCE T550 4 zone conventional extinguishing controller 509.030.005 MXC-DIGI Plug-in Scantronic Minicom Communicator and mounting kit. 509.030.016 MXCE Zone End of Line Unit (Pk 8) 509.030.015 MXCE Spare Key (2 off)

Introduction The self-contained MXCE panels provide all the required monitoring and control functions to install a complete fire detection, alarm and extinguishing system. The MXCE T540 and T550 controllers support 2 and 4 detection zones respectively. Coincidence operation is available as standard on zones 1 and 2. Additionally on the T550, zones 3 and 4 can be used for extinguishing (coincidence) or as independent fire alarm zones. The exceptionally priced T540 and T550 controllers are designed as feature enhanced, aesthetically modern replacement for the current, more expensive and heavily dated T530 and T520 Extinguishing panels. Additionally, the introduction of 2-wire sounder capability (detectors and sounders on the same 2-wire circuit) to the extinguishing systems market will achieve significant cost and installation savings. Installation Features The MXCE offers flexible mounting arrangements, with easily removable door, multiple conduit entries and large terminations, designed specifically for simplified installation. Reversible back-box for top or bottom conduit and cable entry Surface or semi-flush mount

Page 31

Prescient (Conventional Extinguishing Controllers)

switch settings. Two fully monitored actuator/solenoid circuits, each rated at 1A, operate simultaneously upon extinguishant release. The panel can be operated in either automatic mode or manual mode. In the manual mode, the detection circuits will continue to operate, giving first stage alarms and signals to ancillary equipment, but will not automatically actuate the extinguishing systems. This mode can only be overridden by the operation of a manual release unit. On operation of the manual release, a separate or different sounder could be activated. In the automatic mode, following a double knock situation, the release facility will be activated at the end of the time period. The panel provides 0.5 A output at 28V DC to operate interior/ exterior status indicator units. Outputs for auto, manual and discharge are provided at 250mA each. Eight normally - open inputs provide for remote evacuate, silence alarms, systems reset, lock-off input, low pressure input, gas discharged pressure switch input, remote abort and remote fault. Clean contact relays are provided for first stage signalling, second stage signalling, system reset, common fire, common fault and system discharged. Please note that in contrast to the T530, the stand alone abort button feature is not compatible with this panel. Top-entry plastic grommets, bottom-rear entry plastic grommets (for mains) and rear entry knock-outs are designed to assist with cable termination. Panels are boxed complete with three-sticker sets allowing user selection and application on site. Features Suitable for gaseous extinguishing & pre-action water sprinkling systems Designed to BS7273 Part 1 Monitored actuator/solenoid release Comprehensive relay signalling facilities Easily removable chassis Removable cable-entry grommets Adjustable pre-discharge delay Variable discharge configuration Membrane facia with tactile switches Zone isolate features Complies with EMC and LVD Directives Panel Dimensions Height: 445mm Width: 405mm Depth: 105mm Product Codes Prescient Gaseous Extinguishing Panel 2500/046 Prescient gaseous extinguishing panel - 2 extinguishing zones, programmable coincidence, 1 manual release zone, 1 peripheral zone; space for 6.2 Ah battery set (2 x 12V). Prescient Pre-Action Water Sprinkler Extinguishing Panel 2500/045 Prescient pre-action water sprinkler extinguishing panel - 2 extinguishing zones, programmable coincidence, 1 manual release zone, 1 peripheral zone; space for 6.2Ah battery set (2 x 12v) Extinguishing System Extras 2500/048 Status indicator; maximum load - 3 per panel. 2500/049 Status indicator complete with manual release and auto/manual keyswitch; maximum load - 3 per panel. 2500/050 Status indicator complete with manual release, auto/manual keyswitch and timer hold; maximum load - 3 per panel. 2500/051 Weatherproof 3 way status indicator; maximum load - 1 per panel. 2500/052 Weatherproof 3 way status indicator with key switch; maximum load - 1 per panel. 2501/025 Manual release unit. 2501/028 Weatherproof manual release unit (IP 65). 2500/507 Weight monitor system complete (1 load cell and 1 control unit). 2500/053 Actuator suppression kit.

The prescient range of extinguishant panels is a powerful yet user-friendly series of control panels. They are designed and manufactured to a high standard and provide unrivaled value for money by offering a highly featured panel at a lower market price. Each panel in this series has extensive configuration options but remains simple to install, program and operate as reported by satisfied installation engineers and critical endusers. A comprehensive range of technically detailed, support documentation relating to commissioning, operating, maintenance and fault finding is easily available if required. In addition, a complete range of compatible accessories is available to support the series and satisfy most customer requirements. The prescient range of extinguishing panels is available in two variants - either as a gaseous extinguishant panel or a pre-action water sprinkler panel. Panels are housed in well-designed enclosures with partially glazed doors. Steel parts are finished in a hard-wearing epoxy paint. Three fully - monitored detection zones are provided. Zones 1 and 2 normally provide first stage and second stage fire conditions to allow extinguishant discharge (double-knock zones). Zone 3 is an auxiliary zone for detection only purposes. Zone 4 is used as a manual release zone. Two fully monitored alarm circuits are provided, each rated at 1A and may have various configuration options via the engineers DIL

Page 32

T510 Extinguishant Changeover Unit

The T510 is a manual keyswitch operated unit for use on extinguishing systems. The unit allows manual changeover between MAIN and RESERVE cylinder banks and includes an OFF position that disables the operation of the solenoids. The T510 also provides a fault relay, which monitors the solenoid and solenoid wiring. The T510 is provided with 2 keys. Technical Specification Input power supply: 24Vd.c. nominal Current consumption:Standby - 50mA Fault - 15mA Release - 65mA (excluding solenoid) Fault relay: Changeover contact 1A @ 30V d.c. Solenoids: Switched positive for 24V Dimensions: 196 H x 196 W x 90 D mm Weight: 2 Kg Operating Temp: Humidity: EMC/RFI: Product Code 526.001.016.T T510 Extinguishing - Main To Reserve Changeover Unit - Thorn branded -10 to +55 oC up to 95% RH noncondensing CE marked

Datasheet - Product Code PSF30 T530 Fire Detection & Extinguishing Systems Control Unit Manual - 18A-04-D1 Fire Detection Manual

T564 Extinguishing System Status Indicator and Mode Select Switch

A four way status indicator and mode select keyswitch for use with extinguishing controllers. In addition to the indications provided on the T563, the T564 has a mode select keyswitch and LED indicator to identify which units initiated the manual mode. The T564 provides the following features: Clear Visual Indications Modern design to compliment all Interiors L E D Visual Indicators Removable mode select key to provide functional security Compatible with standard UK double gang electrical back boxes Technical Specification Input Power Supply: 24Vdc nominal Current Consumption: 30mA per LED Dimensions: 86W x 146Hmm Product Code 508.030.504 M XCE T564 Indicator Status Unit with Mode Select Switch

Page 33

T526 HOLD & T529 ABORT Switch Unit

The T526 and T529 are large mushroom head robust push buttons for use on any extinguishing release system, although integral resistors are fitted to suit T520, T530 and NTR panels. The switch is double pole for maximum reliability. These switches can be surface or flush mounted using standard UK style single gang electrical back boxes. Operation will vary according to the panel used. Typically on the T520 and T530 release of gas is held for as long as the T526 HOLD switch is depressed. If the switch remains depressed for more than 4 minutes in the quiescent mode then a fault condition is raised. The T529 ABORT switch will typically revert the system back to Manual mode. Technical Specification Dimensions: 71H x 71W x 64D (max) mm Weight: 100g Environmental: Designed for indoor use Product Codes 526.001.019 T526 Extinguishing Release Hold Button Unit Unbranded 526.001.020 T529 Extinguishing Abort Button Unit Unbranded

Datasheet - Product Code PSF30 T530 Fire Detection & Extinguishing Systems Control Unit Manual - 18A-04-D1 Fire Detection Manual

T528 Mechanical Manual Release Unit

These manual release units provide a robust module with a hinged flap retained by frangible washers which ensures that there is an audit trail following a manual release. The T528 provides access to a pull handle which can be connected to the release levers on the gas containers using wire rope. Technical Specification Dimensions: 71H x 71W x 64D (max) mm Weight: 100g Environmental: IP54 Product Codes 526.001.018 T528 Mechanical Manual Extinguishing Release Unit - Unbranded 527.001.013 Spare Frangible Washers (Pack of 25) Datasheet - Product Code PSF30 T530 Fire Detection & Extinguishing Systems Control Unit Manual - 18A-04-D1 Fire Detection Manual

T561 Electrical Manual Release Unit

A stand alone manual extinguishant release unit with selectable activation and end of line resistors making the T561 compatible with MXCE, Prescient, System 1700 and NTR Extinguishing Panels. Product Code 509.030.017 T561 Extinguishing Release Manual Callpoint.

Page 34

Weatherproof Extinguishing Indicator Units

540.007.001 E1 Single Red lamp unit Heavy Duty IP67 Cast Aluminium Surface Mount Lamp Unit. Single 24V d.c. red lamp labelled 'Extinguishing System Operated' Technical Specification Dimensions: H(mm) W(mm) E1 100 100 E3 I3 I4 300 230 230 100 75 75

D(mm) 115 115 75 75

540.007.002 E3 Red/Amber/Green lamp unit Heavy Duty IP67 Cast Aluminium Surface Mount Lamp Unit Three 24Vd.c. lamps: Red labelled 'Extinguishing System Operated' Amber labelled ' Extinguishing System Automatic Control' Green labelled 'Extinguishing System Manual Control'

540.007.006 I3 Red/Amber/Green lamp unit Sealed IP67 ABS Surface Mount Lamp Unit Three 24V d.c. lamps: Red labelled 'Gas Released' Amber labelled 'Auto' Green labelled 'Manual' 540.007.007 I4 lamp unit as I3 including auto/manual keyswitch

T563 Extinguishing System Status Indicator

A three way status Indicator for use with extinguishing controllers which provides indication of automatic/manual mode and gas released. The T563 provides the following features:Clear Visual Indications Modern Design to compliment all Interiors LED Visual Indicators Compatible with standard UK single gang electrical back boxes Technical Specification Input Power Supply: 24 Vdc nominal Current Consumption: 30mA per LED Dimensions: 86 x 86mm Product Code 508.030.503 MXCE T563 Indicator Status Unit

Extinguishing Door Interlock Ancillaries & T500 Series Spares

A microswitch lock keep can be used with a deadlock to provide a signal to the T525 mode select unit or direct to the panel to ensure that the extinguishing system is only put into Automatic mode when the door is locked shut. Datasheet - Product Code PSF30 T530 Fire Detection & Extinguishing Systems Control Unit Manual - 18A-04-D1 Fire Detection Manual Product Codes 527.001.028 Micro-switch Lock Keep & Back-plate For Deadlock 527.001.003 Top Hat Frangible Insert (Spare) 527.001.013 Frangible Washers (Spare) 599.001.011 Lamp 28V 40mA Midget Used On T505/515 599.001.012 Lamp 28V 60mA Used On T525 599.001.020 Lamp 36V 30mA Bi-Pin Used On T520 & T530

Page 35

Conventional Marine Panels T1000 Marine Fire Controller

4 monitored Relay outputs 3 programmable auxiliary inputs 3 levels of alarm discriminations per zone One common fault relay Programmable cause and effect Can interface to intrinsically safe System 601 Manned/ unmanned mode Technical Specification Dimensions: 320H x 430W x 150D mm Weight: 6.3kg Power Supply: 198 -264Va.c. Quiescent Current: 50mA @ 24Vd.c. Alarm Current: 1Amp @ 24Vd.c. Operating Temp: 0 to +40C Operating Humidity: 0-90% RH non-condensing Optional Product Codes The following product codes include all the optional extras which can be included as part of your customer's requirements. Additional spare parts are also included. 509.022.001 NT100 Series Spare Commissioning Kit Included With All Panels 509.022.003 NT100 4 Way Expansion Board - Support NTX02,03,04 Expansion Boards 509.022.004 NT100 16 Way Relay Output Board (24Vd.c.@1A) Requires NTX-01 Expansion Board 509.022.005 NT100 16 Way Digital Output Driver Board Requires NTX-01 Expansion Board 509.022.010 Spare PSU For T1000 Product Codes 508.022.035 T1008 8 zone marine NT conventional fire Controller 508.022.036 T1016 16 zone marine NT conventional fire Controller 508.022.037 T1016R repeater for use with T1008 & T1016

The range of T1000 panels are state-of-the-art intelligent fire panels, which provide many of the features normally only found on more expensive analogue addressable panels. The panels are supplied in 8 and 16 zone versions. Each detection zone can support up to 32 conventional detectors. The user interface is provided through a combination of LEDs and a 2 x 40 character LCD display. The LCD display provides a full customer definable text display of the alarm or fault condition whilst also displaying zones in alarm, fault or isolate status. The display also indicates the outputs that have been activated. Features Developed for Vessels with less than 300 Detectors Approved by all Major Marine Authorities Customer friendly, multi language information on LCD display Comprehensive fault diagnostics 8 and 16 zone Panels Can be used with a wide range of Minerva Marine approved Detectors 4 monitored Sounder outputs up to 4A

Datasheet - Product Code PSF96 T1000 Intelligent Control Panels

509.022.013 NT Flush Mount Bezel 509.022.015 T1000 Display PCB Spare 509.022.016 T1000 CPU board V1.6 spare 509.022.024 T1000R CPU board V1.6R spare

T882 Four Zone Marine Fire Controller

Features Approved by a variety of marine authorities Up to 4 fire detection zones Two alarm levels per detection zone (except I.S. zones) Two monitored bell circuits selectable as continuous or intermittent Secondary alarm output delay (up to 3 mins) Integral power changeover or battery charger option Panel test mode Faults can be set to either latching or nonlatching Can interface to intrinsically safe System 601 Lamp dim feature Replaceable legend Other Input/Output facilities (rated 1A at 30Vd.c. resistive): Two monitored sounder circuits rated at 24Vd.c. 1A each. One silenceable and one non-silenceable Common Alarm contact One latching/non-latching fault contact Four zonal alarm auxiliary contacts Repeater outputs switched to common One fused 24Vd.c. 1A output One external fault monitoring input Technical Specification Operating temp.: -25C to +55C Storage temp.: -25C to +70C Humidity: 95% RH non-condensing The T882 control panel is fitted directly to the bulkhead. Housing is zinc plated 1.6mm thick mild steel. Size Height Width Depth Weight: With Power Unit 267mm 398mm 187mm 10Kg Without Power Unit 267mm 398mm 102mm 8.5Kg

The T882 control unit is intended for marine use throughout the world. The T882 has two sounder circuits. In the event of an alarm the primary bell circuit will operate the sounders in selected areas. If the alarm is not accepted ("Silenced") within three minutes, the secondary circuit will operate all the other sounders in the system. Any manual Alarm callpoint will override the sounder delay. A manual Alert callpoint will not override the delay of the secondary circuit. The T882 can be powered using one of three options: 1/ with internal power unit The ship's 110/240V a.c. supply is the primary supply, switching to a monitored ship's 24V d.c. supply in the event of primary supply failure. 2/ with internal power unit The ship's 110/240V a.c. supply is the primary supply, switching to an internal monitored and charged 24V d.c.-battery supply (Four off, 6V 10Ah lead acids) in the event of primary supply failure. 3/ without internal power unit The ship's 24V d.c. supply is the only supply connected. Page 36

Product Codes 508.013.030 T882 Control Panel c/w Power Unit 508.013.031 T882 Control Panel 24Vd.c. only 509.013.064 T882 PCB Terminal Field 509.013.068 T882 Power Supply Unit 400.007.002 (Available from Thorn Marine) T882 Handbook 560.001.013 Battery 6V 10Ah 509.013.081 Long voyage spares kit 509.013.080 Short voyage spares kit Manual - UHM2 Marine Fire Manual

Precept Marine Fire Controller

fire condition and latch until reset. One nonlatching changeover relay contact operates on any fault condition. Zero volt open collector outputs are provided for zonal fire conditions and common fault. Three normally open inputs provide for remote evacuate, silence alarms and reset control. Features Lloyds approved to BS5839 part 4, ENV 1 and ENV 2 2, 4, 8, 16 or 32 zone variants 230V/24V dual supply options A one-man test facility User-friendly controls Easily-removable chassis Membrane facia with tactile switches Removable cable-entry grommets Zonal and relay outputs Non-latching zone 1 feature Selectable pulsed/continuous sounder outputs For use with Marine Approved accessories Complies with EMC and LVD Directives
.

2500/758 Precept Marine 16 zone control panel Lloyds approved to ENV 1&2. Uses ships own primary & secondary 24V DC supplies. Space for 6.2Ah S.L.A battery set (2 x 12V). 2500/759 Precept Marine 32 zone control panel Lloyds approved to ENV 1& 2. Uses ships own primary & secondary 24V DC supplies.

This marine approved range is designed and manufactured to a high standard and approved by Lloyds Register to BS5839 part 4 and to Marine ENV1 & ENV2. Each panel in this series offers extensive configuration options, in combination with simplicity of panel installation, programming and operation. This is supported by comprehensive documentation relating to commissioning, operation, maintenance and fault identification. The precept marine panel is supplied in 2, 4, 8,16 or 32-zone formats. Panels are housed in well-designed enclosures with partially glazed doors. Steel parts are finished in durable epoxy paint. The motherboard and display electronics are fixed to a detachable chassis, thus facilitating a completely empty enclosure for first fix installation. The motherboard is microprocessorbased and includes all of the panels electronics. Top-entry plastic grommets, bottom-rear entry plastic grommets (for mains) and rear-entry knockouts are designed to assist with cable termination. All panels are designed for use with marine-approved detectors. All zones are monitored for both open and short circuit fault conditions. To enable compliance with BS5839 part 1, active end of line terminators are provided to enable detector removal to be monitored, whilst maintaining fire response from the remaining detectors. Two alarm circuits are provided as standard, monitored for both open and short circuit faults. Two changeover relay contacts operate on any

Product Codes Precept Marine 230V Panel 2500/774 Precept Marine 2 zone control panel Lloyds approved to ENV 1 & 2. Space for 3.2Ah S.L.A battery set (2 x 12V) 2500/775 Precept Marine 4 zone control panel Lloyds approved to ENV 1 & 2. Space for 3.2Ah S.L.A battery set (2 x 12V) 2500/776 Precept Marine 8 zone control panel Lloyds approved to ENV 1& 2. Space for 6.2Ah S.L.A battery set (2 x 12V) 2500/777 Precept Marine 16 zone control panel Lloyds approved to ENV 1 & 2. Space for 6.2Ah S.L.A battery set (2 x 12V) 2500/778 Precept Marine 32 zone control panel Lloyds approved to ENV 1&2. Space for 6.2Ah S.L.A battery set (2 x 12V) Precept Marine 24V Panel 2500/755 Precept Marine 2 zone control panel Lloyds approved to ENV 1 & 2 . Uses ships own primary & secondary 24V DC supplies. Space for 3.2Ah S.L.A. battery set (2 x12V) 2500/756 Precept Marine 4 zone control panel Lloyds approved to ENV 1&2. Uses ships own primary & secondary 24V DC supplies. Space for 3.2Ah S.L.A battery set (2 x 12V). 2500/757 Precept Marine 8 zone control panel Lloyds approved to ENV 1&2. Uses ships own primary & secondary 24V DC supplies. Space for 6.2Ah S.L.A battery set (2 x 12V).

Panel Dimensions

Size Height Width Depth

2-4 zones 310mm 290mm 106mm

8-zones 370mm 326mm 106mm

16 zones 445mm 405mm 109mm

32 zones 445mm 810mm 109mm

Page 37

T680 Marine Power Change Over Unit

The T680 power changeover unit derives power for the T880 and T881 control panels. The unit takes primary power from the ship's AC supply and provides a standby supply from the ship's 24Vd.c. system i.e. the unit does not charge any internal batteries. The T680 unit provides a smooth changeover from primary to secondary supply and vice-versa. It signals main and standby supply failure signals to the T88x control equipment. It also incorporates a dimming circuit for the lamps of the controller. The interface to the control panel is made with a six core connection. The unit is approved by a variety of marine authorities Technical Specification Operating temp.: -25C to +70C Storage temp.: -25C to +70C Humidity: 95% RH non-condensing Mains Supply: 120/240Va.c. 20% at 50/60Hz Standby Supply: 24Vd.c. (must not exceed 32Vd.c.) The T680 unit is normally mounted onto a bulkhead using the H frame bracket. A bezel for 19" rack mounting is available. The housing has two removable gland plates (top and bottom) for cable access. Housing is zinc plated 1.6mm thick mild steel to BS 1706 ZN3. Finish is zinc plated and painted to P.S. 121.121.022. Dimensions: Ingress Protection: Weight: 267H x 398W x 150D mm IP53 17Kg (with bracket) 13.5Kg (without bracket)

Product Codes 508.013.016 T680 Power changeover unit 509.013.026 T680 Spares kit Manual - UHM3 Marine Fire Manual

Page 38

Batteries, PSU and Door Release Units Batteries

Product Codes 660.001.003 Battery sealed L-A 560.001.013 Battery sealed L-A replaces parts 3145 and 30102 3085 Battery sealed L-A replaces 660.001.014 and 30-111 3010 Battery sealed L-A replaces 660.001.007, SLA21 and 30-103 Product Codes 660.001.003 560.001.013 3085 3010 3071 660.002.010 3072 660.002.012 560.001.01 6 660.001.004 560.001.012 3150 Model No. NP1.2-6 NP10-6 NP1.2-12 NP2.1-12 NP2.8-12 NP4-12 NP7-12 NP12-12 NP17-12 NP24-12B NP38-12 NP65-12 3071 Battery sealed L-A replaces 660.001.009 and 30105 660.002.010 Battery sealed L-A replaces 3146, SLA04 and 30112 3072 Battery sealed L-A replaces 660.001.005, SLA07 and 30-101 660.002.012 Battery sealed L-A replaces 3147, SLA012 and 30110 560.001.016 Battery sealed L-A replaces 3148, SLA17 and 30109 660.001.004 Battery sealed L-A (Bolt terminal) replaces 3014, SLA24 and 30-106 560.001.012 Battery sealed L-A replaces 3149, SLA38 and 30107 3150 Battery sealed L-A replaces SLA65 and 30-108

Voltage (V) 6 6 12 12 12 12 12 12 12 12 12 12

Ah 1.2 10 1.2 2.1 2.8 4 7 12 17 24 38 65

Dimensions (mm) Length Width 97 25 151 97 178 151 90 151 151 76 175 179 350 50 48 34 50 70 65 98 180 166 165 166

Height 54.5 97.5 54.5 64 97.5 106 97.5 97 165 125 170 174

Door Release Equipment

Cable Release & Release Button
The 77CR19 cable release unit is used for automatically closing roller shutter doors in the event of a fire. Technical Specification Dimensions: Weight: Voltage: Current: Temp.: Holding Force: 518.003.003 77CR19 Cable release 24Vd.c. 518.003.004 77CR19 Cable release 240Va.c. 519.001.007 Door release button UK single gang mounting IP Rating: 130H x 180W x 60D mm 2.5Kg 240Va.c. / 24Vd.c. Negligible / 500mA -20oC to +45oC 50Kg IP40

Door Release Magnet

High quality door release magnet sets complete with keeper plate. Technical Specification Power Supply: 24Vd.c. 240Va.c. Dimensions: 100H x 100W x 64D mm Weight: 0.51Kg Holding Force: IP Rating: Temp.: Current: 18Kg IP40 -10oC to +55oC 60mA 25mA 518.004.004 Door Release Magnet Set 240Va.c. 518.004.005 Door Release Magnet Set 24Vd.c.

Page 39

Door Release Units

Technical Specification Door Release Units 40-103 40-104 Dimensions: 85H x 85W x 46D mm Armature Dims: Dia 72mm x 21mm deep Voltage: 24Vd.c. 240Va.c. Hold Force: 17Kg 20Kg Current: 60mA 20mA Residual Magnetism:5% 5%

Product Codes 40-103 Door release unit 24Vd.c. with keeper plate 40-104 Door release unit 240Va.c. with keeper plate

Product Code 40-105 Floor mounting brackets for 40-103/104 Dimensions: 100H x 85W x 55D mm Cable Entry: 20mm

Door Release Power Supply

The Transformer Rectifier is a dual purpose, smoothed power supply providing either an energised or de-energised output upon activation. The output may be activated by utilising a set of volt free contacts from a fire or security panel, or by providing a 12/24Vd.c. trigger voltage from other apparatus. The transformer rectifier units are normally used to control the operation of other 24Vd.c. equipment such as the magnetic door retainers. The units are ideal for applications where the supply is to be energised from a remote source. Technical Specification Input: 240Va.c. Output: 24Vd.c. 3A Dimensions: 230H x 320W x 75D mm Product Code 558.004.007 TRR-243 3A Door Release PSU

General Power Supply Units

Datasheet - Product Code PSF25 C2400 Series Power Supply Unit Manual - FSSD-4.1.4.1 Fire Detection Manual

C Range Chargers
lead-acid battery and an attractive housing. Under normal conditions, the charger provides all the system power and maintains the battery in the charged condition. When the AC supply fails, the stand-by battery takes over. Features A range of chargers and housings to suit different system configurations May be used with both conventional and analogue addressable fire systems The C2400 series power supply equipment provides primary and secondary power for fire alarm systems. The power supply consists of an AC supply operated charger, a stand-by sealed Large aluminium heatsink eliminates need for unsightly ventilation grills Temperature compensated output ensures correct charging voltage at all times Automatic protection for short-circuit conditions is designed to prevent damage Optional voltmeter and ammeter Technical Specification Operating Temp: -20oC to +55 oC Storage Temp.: -20oC to +70 oC Relative Humidity: 95% RH non-condensing Output Voltage: 27Vd.c. Product Code 558.004.006 C Range charger 24V 4 Amp

Housing Type D
The housings are available in two sizes and can be supplied with an ammeter and voltmeter if required. An AC supply on indicator is fitted. Technical Specification Type D: 420H x 436W x 210D mm Holds charger and up to 2 x 38Ah sealed batteries at 24V d.c. Product Codes 558.004.013 Housing Type D complete with meters 558.004.014 Housing Type D

Housing Type C
The housings are available in two sizes and can be supplied with an ammeter and voltmeter if required. An AC supply on indicator is fitted. Technical Specification Type C: 290H x 416W x 160D mm Holds charger and up to 2 x 12Ah sealed batteries at 24V dc Product Codes 558.004.015 Housing Type C complete with meters 558.004.016 Housing Type C

Page 40

Addressable 900 Series Detectors

Body Optical Ionisation HPO R of R Heat MD901 CO MU901 LPCB MR901 MF901 MR901T NSTC MF901 MR901T UL/FM 912P 912I 912HP Marine MR901M MF901M The M900 series are a range of low profile addressable fire detectors. These unobtrusively styled detectors have a number of unique design features to improve their operation, installation and ease of servicing. Through innovative design the M900 Series detectors have reduced the installation and servicing time to a minimum, needing only one visit to complete the installation. The detectors also have a park position, which eases detector servicing. The unique smart key feature ensures that the address is transferred to the base after installation. This ensures that the detector addresses are not accidentally confused during service visits. The M900 series includes the unique Carbon Features Unique early detection CO fire detector Intelligent Universal HPO Smoke Detector Low profile, discreet and unobtrusive Superior performance and reliability Unique Smart Key feature Designed for fast, easy installation Optional Locking Kit Integral and remote alarm LED Series of Product Approvals The M900 Low Profile detectors can be custom made in several colours, please contact the Walthamstow office for details.

912H MD901 Monoxide CO fire detector, which provides a general purpose fire detector with unprecedented early detection capability and excellent false alarm immunity. The CO fire detectors are the first choice for sleeping risks. Also included within the range is the intelligent high performance optical smoke (H.P.O.) detector . The use of the patented optical sensing chamber, together with refined signal processing, has enabled the introduction of a smoke detector suitable for fast, reliable smoke detection of both slow and fast developing fires. The H.P.O. can be seen as a truly universal smoke detector, suitable for most applications.

Carbon Monoxide Fire

The CO fire detector is a unique general purpose fire detector which provides very early warning of slow smouldering fires. Ideal for sleeping risks the CO fire detector is also well suited to many applications where heat detection is insufficient but smoke detection causes false alarms. As CO travels more freely than smoke the positioning of CO fire detectors is more flexible. This feature is particularly useful in large complex structures such as atria and warehouses, where positioning of smoke detectors is difficult. The MU901 is LPCB approved in normal and high sensitivity settings. Product Codes 516.059.001.A 516.059.001.T 516.059.001.Y Approval Branded Model LPCB ADT MU901 LPCB Thorn MU901 LPCB Tyco MU901

Datasheet - Product Code PSF94 Carbon Monoxide Fire Detector Manual - Vol01B-03-D7 Detectors Fire Manual

High Performance Optical Smoke

These detectors react to the whole range of fire products from slow smouldering fires, producing visible particles to open flaming fires producing large numbers of very hot smaller sized aerosols. It combines optical and heat detector technology to detect clear burning fire products which hitherto could only be easily detected by ion-chamber detectors. For normal ambient conditions, the high performance optical detector behaves as a normal optical detector. When a rapid rise in temperature is detected the sensitivity of the detector increases and the presence of smoke will confirm a fire condition which will be Product Codes Approval 516.055.001.A LPCB 516.055.001.T LPCB 516.055.001.Y LPCB 516.055.031 UL 515464 UL Branded Model ADT MR901T Thorn MR901T Tyco MR901T Thorn 912HP Grinnell 912HP

transmitted as an alarm level. The HPO will not operate on a rate of rise of temperature alone. Datasheet - Product Code PSF84 M600/900 Low Profile Fire Detector Range Manual - Vol01B-03-D4 Detectors Fire Manual

Optical Smoke
These detectors are capable of detecting the visible smoke produced by materials which smoulder or burn slowly, i.e. soft furnishings, plastic foam etc;. or 'smoke' produced by overheated but unburnt PVC. These detectors are particularly suitable for general applications and areas where cable overheating may occur e.g. electrical services areas. The novel design of the asymmetrical sampling chamber and signal processing techniques stop unwanted alarms caused by very small insects. i.e. thrips. Smoke entering the sampling chamber scatters the infrared light pulses onto a photodiode These pulses are converted to an electrical signal which is transmitted as an analogue value. Product CodesApproval 516.057.001.A LPCB 516.057.001.T LPCB 516.057.001.Y LPCB 515463 UL 516.057.031 UL 516.057.401 Marine Branded Model ADT MR901 Thorn MR901 Tyco MR901 Grinnell 912P Thorn 912P Thorn MR901M

Datasheet - Product Code PSF84 M600/900 Low Profile Fire Detector Range Manual - Vol01B-03-D6 Detectors Fire Manual

Page 41

Heat
These detectors use two networked thermistors in a bridge configuration to provide a fast response, that depends both on absolute temperature and notes the change of temperature. The rate of rise/fixed temperature heat detectors can be used in areas where smoke sensors are unsuitable due to environmental conditions (smoke, dust etc,). Such areas include kitchens, locker rooms, canteens, garages, loading bays etc. The integral electronics emulate conventional fire detector's response curves and transmit the state to a controller as an analogue representation of the ambient temperature conditions. Product CodesApproval 516.053.001.A LPCB 516.053.001.T LPCB 516.053.002 UL 515461 UL Branded Model ADT MD901 Thorn MD901 Thorn 912H Grinnell 912H

Datasheet - Product Code PSF84 M600/900 Low Profile Fire Detector Range Manual - Vol01B-03-D5 Detectors Fire Manual

Ion Chamber Smoke

These detectors react to the visible and invisible fire aerosols (products of combustion) and are therefore capable of detecting the early presence of hot smouldering and flaming fires, such as wood, paper etc. They are particularly suitable for general applications in all areas and use a dual ionisation chamber in which the air is ionised by a single radioactive source (33k Bq Americium 241). The presence of smoke in the sampling chamber causes a change in the balance voltage, between the two chambers. This is then converted to a current level and transmitted as an analogue value. Product CodesApproval 516.051.001.A LPCB 516.051.001.T LPCB 516.051.001.Y LPCB 516.051.031 UL 515462 UL 516.051.401 Marine Branded Model ADT MF901 Thorn MF901 Tyco MF901 Thorn 912I Grinnell 912I Thorn MF901M

Datasheet - Product Code PSF84 M600/900 Low Profile Fire Detector Range Manual - Vol01B-03-D3 Detectors Fire Manual

Technical Specification
Typical Dimensions of Standard 4 Detector

Technical Specification - M901 Series MD/MR Weight 112g Material Operating Temp. -20 to +70 oC Storage Temp. -25 to +80 oC Relative Humidity Quiescent Current(typ) 240A

MF 137g FR 110 Bayblend -20 to +70 oC -25 to +80 oC 95% Non-Condensing 120A

MU 137g 0 to +50 oC -20 to +50 oC 120A

Page 42

Page 43

Conventional 600 Series Detectors

Body LPCB NSTC SSL/NZ* UL/FM Optical MR601 MR614 612P Ionisation MF601 MF601 MF614 612I HPO MR601T MR601T MR614T 612HP R of R Heat MD601 MD614 612H FT MD611 60C CO MU601 Features Unique early detection CO fire detector Intelligent Universal HPOSmoke Detector Low profile, discreet and unobtrusive Superior performance and reliability Attractive new design Designed for fast, easy installation Optional Locking Kit Integral and remote alarm LED Series of Product Approvals The M600 low Profile detectors can be custom made in several colours, please contact the Walthamstow office for details

MU614 622H 135F 632H 200F VdS MR613 MF613 MR613T MD613 MD623 Marine MR601M MF601M MD601 MD611 *Available from Grinnell Detection Products in Melbourne & Grinnell Supply Sales N.Z. The M600 series are a range of low profile early detection capability and excellent false conventional fire detectors. These unobtrusively alarm immunity. The CO fire detectors are the first styled detectors have a number of unique design choice for sleeping risks. features to improve their operation, installation Also included within the range is the intelligent and ease of servicing. high performance optical smoke (H.P.O.) detector . Through innovative design the M600 series The use of the patented optical sensing chamber, detectors have reduced the installation and together with refined signal processing, has servicing time to a minimum, needing only one enabled the introduction of a smoke detector visit to complete the installation and having a Park suitable for fast, reliable smoke detection of both position for the detector to ease the servicing. slow and fast developing fires. The H.P.O. can be seen as a truly universal smoke detector, suitable The M600 series includes the unique Carbon for most applications. Monoxide CO fire detector, which provides a general purpose fire detector with unprecedented

Carbon Monoxide Fire

The CO fire detector is a unique general purpose fire detector which provides very early warning of slow smouldering fires. Ideal for sleeping risks the CO fire detector is also well suited to many applications where heat detection is insufficient but smoke detection causes false alarms. As CO travels more freely than smoke the positions of CO fire detectors is more flexible. This feature is particularly useful in large complex structures such as atria and warehouses, where positioning of smoke detectors is difficult. The MU601 is LPCB Approved. Product Codes 516.058.001.A 516.058.001.T 516.058.001.Y 516.058.001.W Approval LPCB LPCB LPCB LPCB Branded ADT Thorn Tyco Wormald Model MU601 MU601 MU601 MU601

Datasheet - Product Code PSF94 Carbon Monoxide Fire Detector Manual - Vol01B-04-D8 Detectors Fire Manual

High Performance Optical Smoke

These detectors react to the whole range of fire products from slow smouldering fires, producing visible particles to open flaming fires producing large numbers of very hot smaller sized aerosols. It combines optical and heat detector technology to detect clear burning fire products which hitherto could only be easily detected by ion-chamber detectors. For normal ambient conditions, the high performance optical detector behaves as a normal optical detector. Only when a rapid rise in temperature is detected does the sensitivity of the detector increase and the presence of smoke will confirm a fire condition. The HPO will not operate Product Codes 516.054.001.A 516.054.001.T 516.054.001.Y 515458 Approval LPCB LPCB LPCB UL Branded ADT Thorn Tyco Grinnell Model MR601T MR601T MR601T 612PH

on a rate of rise of temperature alone. Datasheet - Product Code PSF84 M600/900 Low Profile Fire Detector Range Manual - Vol01B-04-D4 Detectors Fire Manual

Optical Smoke
These detectors are capable of detecting the visible smoke produced by materials which smoulder or burn slowly, i.e. soft furnishings, plastic foam etc;. or 'smoke' produced by overheated but unburnt PVC. These detectors are particularly suitable for general applications and areas where cable overheating may occur e.g. electrical services areas. The novel design of the asymmetrical sampling chamber and signal processing techniques stop unwanted alarms caused by very small insects. i.e. thrips. Smoke entering the sampling chamber scatters the infrared light pulses onto a photodiode These pulses are converted to an electrical signal which is compared against a preset alarm level. Page 44 Product CodesApproval 516.056.001.A LPCB 516.056.001.T LPCB 516.056.001.Y LPCB 516.054.041.W VdS 515457 UL 516.056.031 UL 516.056.401 Marine Branded Model ADT MR601 Thorn MR601 Tyco MR601 Wormald MR613 Grinnell 612P Thorn 612P Thorn MR601M

Datasheet - Product Code PSF84 M600/900 Low Profile Fire Detector Range Manual - Vol01B-04-D6 Detectors Fire Manual

Heat
These detectors use two networked thermistors in a bridge configuration to provide a fast response, that depends both on absolute temperature and notes the change of temperature. The rate of rise/fixed temperature heat detectors can be used in areas where smoke sensors are unsuitable due to environmental conditions (smoke, dust etc,). Such areas include kitchens, locker rooms, canteens, garages, loading bays etc. The integral electronics emulate conventional fire detector's response curves and transmit the state to a controller as an alarm condition. Rate of Rise Product Codes Approval 516.052.001.A LPCB 516.052.001.T LPCB 516.052.001.Y LPCB 516.052.013.W VdS 515453 UL 516.052.031 UL Fixed Temperature 60C Product Codes Approval 516.052.011.A LPCB 516.052.011.T LPCB 516.052.011.Y LPCB 516.052.033.W VdS Fixed Temperature 90C Product Codes Approval 515455 UL 516.052.022 UL Branded ADT Thorn Tyco Wormald Grinnell Thorn Model MD601 MD601 MD601 MD613 612H 612H

Branded ADT Thorn Tyco Wormald

Model MD611 MD611 MD611 MD623

Branded Model Grinnell 632H Thorn 632H

Datasheet - Product Code PSF84 M600/900 Low Profile Fire Detector Range Manual - Vol01B-04-D5 Detectors Fire Manual

Ion Chamber Smoke

These detectors react to the visible and invisible fire aerosols (products of combustion) and are therefore capable of detecting the early presence of hot smouldering and flaming fires, such as wood, paper etc. They are particularly suitable for general applications in all areas and use a dual ionisation chamber in which the air is ionised by a single radioactive source (33k Bq Americium 241). The presence of smoke in the sampling chamber causes a change in the balance voltage, between the two chambers. This is then compared against an alarm level. Product CodesApproval 516.050.001.A LPCB 516.050.001.T LPCB 516.050.041.W VdS 516.050.031 UL 515456 UL 516.050.401 Marine Branded Model ADT MF601 Thorn MF601 Wormald MF613 Thorn 612I Grinnell 612I Thorn MF601M

Datasheet - Product Code PSF84 M600/900 Low Profile Fire Detector Range Manual - Vol01B-04-D3 Detectors Fire Manual

Technical Specification
Typical Dimensions of Standard 4 Detector

Technical Specification - M601 Series MF Weight 134g Material Operating Temp. -20 to +70 oC Storage Temp. -25 to +80 oC Relative Humidity Quiescent Current(typ) 70A Alarm Current(typ) 40mA Operating Voltage 18-32Vd.c. *Short Term (<3min) -40 to +120oC

MR 122g

MD MU 114g 137g FR 110 Bayblend -20 to +70 oC -20 to +70 oC* -20 to +50 oC -25 to +80 oC -20 to +70 oC -25 to +70 oC 95% Non-Condensing 60A 50A 50A 36mA 40mA 40mA 18-32Vd.c. 18-32Vd.c. 18-32Vd.c.

Page 45

Page 46

Tyco M600/M900 Detector Series Identification Card

A convenient pocket sized quick reference card designed to aid the identification of Tyco M600/M900 Series Detectors. (M900 Series information is on the reverse of card). Product Code AM2801/000 ID Card Note: Cards must be ordered in multiples of 100.

Page 47

Standard Detector Bases

The Standard Universal detector bases are compatible with both conventional (M600) and analogue (M900) addressable detectors. The bases have no electronics and even when the detectors are connected to the bases, they can be electrically disconnected and left in a park position. This enables wiring integrity tests to take place without any damage to electronics. When used with addressable detectors, the smart card access key automatically transfers to the base, thus the address remains with the base even if the detector is changed or replaced. An optional, tool removable locking pin allows the detector to be fixed in place to prevent tampering.

M600/900 and 4B - 4 Inch Universal Base

Features Variety of fixing options Remote LED connections Available with continuity diode fitted Anti-tamper facility LPCB, Vds, Marine approved (M600/900) UL approved (4B) Product Codes 517.050.001 M600/900 4 Universal mounting base for LPCB, Vds approved detectors 571.070 - (K07226456) M600/900 4 Universal mounting base for LPCB, Vds approved detectors - Zettler Branded 515467 4B - 4 Universal mounting base for UL Approved Detectors - Grinnell Branded. 517.050.601 4B - 4 Universal mounting base for UL Approved Detectors - Thorn Branded. Datasheet - Product Code PSF101 M600/900 Low Profile Detector Bases Manual - Vol01B-03-D2 Detectors Fire Manual

The 4 inch base is designed to fit directly to the ceiling or various common backboxes. This base allows a detector to be fitted indirectly or a functional base to be plugged in between the base and detector.

M600D Continuity Base

M600 Series detectors. The Base is designed to ensure that the conventional system meets the requirements of BS5839 Pt:1 for call-points placed after detectors. The M600D works with XL, NT, System 1700, MINERVA 1 to 4, MINERVA MDM520 Module. Product Codes 517.050.007 M600D Diode continuity mounting base. 509.018.006 Active End of Line Unit for use with M600 conventional detectors (not required on NT and XL panels which are supplied with special EOL devices)

Datasheet - Product Code PSF84 M600/900 Low Profile Fire Detector Range Manual - Vol01B-03-D2 Detectors Fire Manual

The M600D Continuity base is a standard 4 inch base fitted with a continuity diode, for use with all

6 Universal Base
The 6 base is specially designed for applications using the US style single gang backbox. The 6 base provides an alternative to the 4 base in most applications and is particularly useful where large holes in the ceiling need covering or where ceilings suffer from condensation. Features Variety of fixing options Sealed back and cable entry Remote LED connections Anti-tamper facility UL approved (6B) Product Codes 515468 6B Lo Pro detector base (6) Grinnell branded. 517.050.606 6B Lo Pro detector base (6) Thorn Security branded. Suitable for use with LPC and Vds approved detectors

Page 48

Functional Detector Bases

Functional detector bases use a common moulding which incorporates a double side circuit board which enables electrical connections to be made on the top and bottom of the functional base. This allows the functional bases to be retrofitted into new and existing universal bases or alternatively the depth and cost of the installed detector can be reduced by using the functional base instead of the universal base. This feature enables additional line isolators and sounders to be easily added during commissioning. In addition, changes to the building during its life can be easily adapted to, by retrofitting sounders and relay outputs to existing detection points. When functional bases are fitted to universal bases, they automatically lock into position. Removal is then achieved using the detector removal tool. This feature ensures that the detector and functional bases are removed separately. When used on addressable systems, the MC900 takes the same address as the detector. This increases the number of devices on a loop and significantly improves fault monitoring. Any attempt to remove the functional base will generate a fault on the system. Datasheet - Product Code PSF101 M600/900 Low Profile Detector Bases Manual - Vol01B-03-D2 Detectors Fire Manual

Tyco MKII Sounder Bases

Features Manufactured to EN54 part 3 Integral sounder and detector base Volume and tone adjustable after installation Low Power Synchronisation Do not require use of a standard base (maybe installed directly onto a standard besa box) Product Codes 577.001.035 601SB Conventional Sounder Base 577.001.037 601SBD Conventional Diode Sounder Base 577.001.036 602SB 2 Wire Line Powered Sounder Base 577.001.038 602SBD 2 Wire Line Powered Diode Sounder Base 516.800.911 901SB Universal Sounder Base 516.800.912 912SB Universal UL Sounder Base

Please See Following Applications Table for Further Details. A new low current range of sounder bases for use with Conventional and Addressable Fire Alarm Control Panels.

Tyco MKII Sounder Cap

A plastic cap which fits onto the 601SB/601SBD/602SB/602SBD Sounder Base to enable these bases to operate as a sounder without fitting a detector. Product Codes 557.001.040.A Mark II Sounder Cap (ADT Branded) 557.001.040.T Mark II Sounder Cap (Thorn Branded) 557.001.040.Y Mark II Sounder Cap (Tyco Branded) .

Volume Adjustment Tool

A simple Volume Adjustment Tool, specific to the task of sounder volume selection on the variablevolume range of Tyco MKII Sounder Base Devices. Sounder volume can be easily varied between the maximum 90dBA and minimum 68dBA-volume settings, using this simple, functional tool. Note: Sounder Base Devices are supplied with the volume pre-set to maximum volume. Product Code 517.050.015 Volume Adjustment Tool

Page 49

Tyco MKII Sounder Base Range Identification Card

A convenient pocket sized quick reference card designed to aid the identification of the Tyco MKII Sounder Base Range. This concise card provides a simple, effective reference key for rapid identification of sounder base type during the initial visual system analysis and needs assessment.

Product Code 517.050.016 ID Cards Note: Cards must be ordered in multiples of 100.

Page 50

MKII Sounder Base Applications Table

Page 51

MC900 & 900RBA Functional Relay Base

even when the relay is energised, enable the relay base to be used without any additional power. On addressable systems, the dual contacts operate when the detector is in alarm OR when commanded to do so by the panel. Features Dual pole 24V d.c. relay contacts (60VA) Status indication LED Very low power consumption (<20A except start up) Can be used in place of a standard base Technical Specification Operating Temp.: -25 to 70C Humidity: Up to 96% RH (noncondensing) Vibration: Power Supply: Product Codes 568.001.016 MC900 Relay base (BS 5839) 515591 900 RBA Relay base (UL - Grinnell) Exceeds requirements of prEN54-3 Marine & UL268 Loop/Circuit

The 900 Series relay base provides dual relay contacts for signalling external devices on addressable systems. Very low operating current

MC600 & 600RBA Functional Relay Base

conventional detection systems. Very low operating current even when the relay is energised, enable the relay base to be used without additional power. The relay contacts operate when the detector enters the alarm condition. Features Dual pole 24Vd.c. relay contact (60VA) Status indicator LED Low power consumption (<20A except start up) Latching operation Can be used instead of a standard base Requires diode fitting if used in place of an M600D diode base. Not compatible with System 1600 or T880 panels The MI900 incorporates the same circuitry as the LI520 MKII line isolator to provide a flexible and easily installed line isolation on MINERVA analogue addressable systems. As the line isolator is easily inserted or removed, future system changes can be implemented to suit changes in building use with minimum disruption. Features Up to 12 isolators per loop Status indication LED Easily retrofitted Complies with BS5839 Technical Specification Operating Temp.: -25C to +70C Humidity: Up to 95% RH (non condensing) Vibration: Exceeds requirements of prEN54-3, Marine & UL268 Product Codes 568.001.018 MC600 Relay base (BS5839) 515590 600 RBA Relay base (UL - Grinnell)

The 600 Series relay base provides dual relay contacts for signalling external devices on

MI900 Analogue Addressable Loop Line Isolator

Technical Specification Operating Temp.: -25 to 70C Humidity: Up to 96% RH (noncondensing) Vibration: Exceeds requirements of prEN54-3 Marine & UL268 Power Supply: Loop Product Code 545.001.008 MI900 Line isolator base for use with M900 detectors on MINERVA systems (also compatible with TFX systems but not UL approved)

Detector Locking Pin Kit

Product Codes 517.050.005 M69 Detector locking pin kit (Pack of 100) 571.071 Zettler Detector locking pin kit (Pack of 100) (K07226458) Datasheet - PSF101 M600/900 Low Profile Detector Bases Manual - Vol01B-03-D2 Detectors Fire Manual

Page 52

M600/900 Detector Ancillaries M600/900 Ancillaries

Product Codes 517.051.002 (Supplied in 10s) M900 Smart card address key 515472 (Supplied in 10s) 900 Smart card address key (Grinnell) 517.051.402 (Supplied in 10s) M900M Smart card address key (Marine)

Product Code 517.050.002.A Low profile line shorting adaptor commissioning tool (shorts terminals together enabling cable resistance checks to be carried out) - ADT Branded.

Product Codes 517.050.003.A CA600 Low profile line continuity adaptor commissioning tool (provides cable continuity through the base) - ADTbranded 517.050.003.T CA600 Low profile line continuity adaptor commissioning tool (provides cable continuity through the base) - Thorn branded

Product Codes 517.051.007 M900F Smart card address key programmer freestanding 515474 M900F Address key programmer (Grinnell)

Product Codes 517.051.008 M900C Smart card address key programmer for use with Consys 515475 M900C Smart Card Address key programmer for TFX (Grinnell)

Product Code 540.003.006.T Remote Indicator LED square UK single gang mounting (Thorn Branded) for use with conventional detectors.

Product Codes 517.001.231 DHM69 Deckhead mounting for M600/900 series 517.001.181 DHM7 Earthing strip

Product Code 517.050.011 W500 White powder coated steel protective cage for M600/900 series detectors also suitable for most other smoke detectors. 120mm dia x 80mm deep

Page 53

Duct Probe Air Sampling

MP/SMP Duct Probe Units The MP/SMP Duct Probe Units are designed to be installed in air conditioning supply and exhaust ducts for the purpose of monitoring the airflow for smoke and combustion products. The MP69 and SMP69 probe units are designed to accept and operate with the M600 and M900 series detectors. MP35 and SMP35 duct probe units are available for use with M300 and M500 intrinsically safe series detectors and bases. For general applications it is recommended that photoelectric smoke detectors rather than ionisation smoke detectors are used. The SMP stainless steel probe unit is designed to withstand the more demanding environments of the offshore oil and gas industries. The units are designed to operate in airspeeds of 1.5 to 25 metres per second. A range of sampling tubes from 450mm to 1500mm are available. Technical Specification Operating temperature: -20C to +70C Storage temperature: -25C to +80C Relative Humidity: 0 to 95% MP## "Bayblend" housing with transparent polycarbonate cover SMP## Stainless steel 316 housing with transparent polycarbonate cover Height Width Length Weight MP69 90mm 145mm 220mm 0.58Kg SMP69 90mm 150mm 225mm 1.2Kg MP35 116mm 145mm 220mm 0.35Kg SMP35 116mm 150mm 225mm 1Kg

Warning Duct probe units sited in the common duct work to several extract grills may fail to respond to smoke from any one extract due to the effect of dilution. The MP/SMP units will not respond to airflow of less than 1.5m/sec.

Siting Duct probe units should always be sited as near to the point of extraction from the room as possible and in lengthy duct work runs, at intervals along the run. Probes should be mounted at the least turbulent sections of the ducting. Avoid installation immediately behind fans, bends or work sections.

MP69 & MP35 Duct Probe Air Sampling

Product Codes 517.025.036 MP69 Duct Probe unit and base for M600/900 Series 517.025.021 (PSF64) MP35 duct probe unit for M300/500 series 517.001.035 DP450 Probe Tube and exhaust 517.001.036 DP600 Probe Tube 600mm and exhaust 517.001.037 DP750 Probe Tube 750mm and exhaust 517.001.038 DP900 Probe Tube 900mm and exhaust 517.001.039 DP1200 Probe Tube 1200mm and exhaust 517.001.040 DP1500 Probe Tube 1500mm and exhaust Datasheet - Product Code PSF91 MP69 Duct Probe Unit and PSF64 Series 300/400/500 Fire & Smoke Detectors Manual - Vol01B-06-D1 Detectors Fire Manual

SMP69 & SMP35 Duct Probe Air Sampling - Stainless Steel

517.025.027 (PSF64) SMP35 duct probe unit stainless steel for M300/500 series 517.025.028 DPS450 Probe tube stainless steel and exhaust 517.025.029 DPS600 Probe tube stainless steel 600mm and exhaust 517.025.030 DPS750 Probe tube stainless steel 750mm and exhaust 517.025.031 DPS900 Probe tube stainless steel 900mm and exhaust 517.025.033 DPS1500 Probe tube stainless steel 1500mm and exhaust Datasheet - Product Code PSF92 SMP69 Duct Probe Unit and PSF64 Series 300/400/500 Fire & Smoke Detectors Manual - Vol01B-06-D1 Detectors Fire Manual

Product Codes 517.025.035 SMP69 Stainless Steel Duct Probe unit and universal detector base for M600/900 series

Page 54

Page 54

Aspirating Smoke Detectors VESDA - Vision Systems

VESDA LaserPLUSTM, is a high sensitivity aspirating smoke detector. It provides both an early warning to facilitate intervention, and a suppression (Fire 2) signal to initiate release at an appropriate level, eliminating the need for a separate detection system. The system is modular, displays and programmers can be installed only where needed. Many VESDA products are also available from stock in German. German product codes are shown in brackets where they exist. Datasheet - Product Code PSF105 VESDA LaserPLUS

VESDA LaserCOMPACTTM
combination of approved LaserPLUS detection technology, dual stage filtration technology and a modified aspirator design incorporated in a smaller enclosure with simplified display. LaserCOMPACT is available in two versions, one that interfaces via relays only (RO) or across either the relays or VESD AnetTM (VN). Features Reduced size Absolute smoke detection Wide sensitivity range Single pipe inlet Simple display Referencing VESDAnet communication (VN) Dual stage dust filter Three alarm levels Configurable relays Air flow monitoring Optional remote display and relay capability Simple mounting design AutoLearnTM Technical Specification Supply Voltage: 18 to 30Vd.c. Current Consumption: 225mA quiescent, 245mA in alarm Dimensions: 225H x 225W x 85Dmm Weight: 1.9Kg Operating Temp.: -10oC to+ 39 oC Sampled Air: -20oC to +60 oC Product Codes 516.018.010 (561.043 ) VLC-505 VESDAnet Version (VN) 516.018.011 (561.042 ) VLC-500 Relays Only Version (RO)

The LaserCOMPACT detector has been specifically designed to provide all the benefits of aspirating smoke detection, including very early warning, in single small areas and where space is a premium. This has been achieved through the

LaserPLUS Standard Modular Range - LaserPLUS Detectors

The detector assembly contains the laser detection chamber, high efficiency aspirator, monitored filter cartridge, control electronics, and relay interface. The detector assembly can be used as a distributed system, with the display, programmer and VESDAnet socket modules mounted in a remote location. Alternatively, the detector assembly can be configured as a selfcontained system by replacing the detectors blank panels with the display and/or programming modules. Features Wide sensitivity range Laser-based light source 4 Configurable alarm levels Purpose built Aspirator 4 In-line Inlet pipes Flow sensor for each inlet pipe Wide range DC power Low-cost maintenance Dual stage filter Easy access to filter cartridge 7 Software configurable relays Recessed mounting Multiple exhausts Technical Specification Supply Voltage: 18 to 30Vd.c. Current Consumption: (No display or programmer) 240mA quiescent plus 50mA alarm (24Vd.c. & 3000 rpm) Dimensions: 225H x 350W x 125D mm Weight: 4.0Kg (including display and programmer modules) Operating Temp.: 0oC to + 39 oC Humidity: 0-95% RH, non condensing

516.018.001 (561.036 ) VLP-012 LaserPLUS Detector, programmer and display

516.018.002 (561.037 ) VLP-002 LaserPLUS Detector and display

516.018.003 VLP-000 LaserPLUS Detector

516.018.013 (561.038) VLP-400 LaserPLUS Detector with fire OK LED

Page 55

Page 55

LaserPLUS Scanners - 7 & 12 Relay Output Variants

VESDA LaserPLUS is also available in a Scanner configuration, which allows the system to distinguish and identify the pipe carrying smoke, while sampling multiple sectors. The VESDA LaserPLUS will continue to sample from all sectors to monitor the fire growth and maintain full protection. Features Individual pipe annunciation Adaptive scan threshold Wide sensitivity range (0.005 to 20% obs/m) Laser based light source Configurable alarm levels Purpose built Aspirator 4 In-Line inlet pipes Flow sensor for each pipe inlet Low-cost maintenance Dual stage filter Easy access to filter cartridge Recessed mounting Technical Specification Supply Voltage: 18 to 30Vd.c. Current consumption:(No display or programmer) 240mA quiescent plus 70mA alarm (24Vd.c. & 3000 rpm) Dimensions: 225H x 350W x 125D mm Weight: 4.0Kg including display and programmer modules Operating Temp.: 0C to + 39 C Humidity: 10-95% RH, non condensing Relay Outputs: 7 or 12

516.018.004 (561.044) VLS-214 FD7 Scanner, programmer and display with 7 relays. 516.018.007 (561.039) VLS-314 FD12 Scanner, programmer and display with 12 relays

516.018.005 (561.045) VLS-204 FD7 Scanner and display with 7 relays. 516.018.008 (561.040) VLS-304 FD12 Scanner and display with 12 relays

516.018.006 VLS-200 FD7 Scanner 516.018.016 (561.046) VLS-600 FD7 Scanner with Fire OK LED 516.018.009 VLS-300 FD12 Scanner 516.018.019 (561.041) VLS-700 FD12 Scanner with Fire OK LED

Optional Remote Displays

A display module monitors the VESDA LaserPLUS detector. It reports a visual representation of smoke levels, and all alarm and fault conditions. The internal sounder warns personnel in the local area that an alarm threshold has been reached, or a fault has occurred. It has a 20 segment vertical bar graph, a 2-digit numerical display, an audible sounder and clear alarm and fault indicators. It also has 4 push buttons to control the detector and the mode of Scanner Displays the display. Displays can be located at a convenient location either within the detector module, or remotely on the VESDAnet. For monitoring convenience, multiple displays can be associated with a single detector. Features Four alarm levels (Alert/Action, Fire 1 & Fire 2) 20 segment vertical bar graph Alarm threshold indicators (Alert, Action & Fire 1) Audio and visual indication Alarm indicators Informative fault indicators Multi-mode numeric display(defaults to smoke obscuration) Acknowledged push-button presses Multiple language supported Addressable to any detector Technical Specification Supply Voltage: 18-30Vd.c. (when used in detector unit, Remote unit or 19 rack) Current Consumption: 60mAquiescent plus 20mA alarm @24Vd.c. - (module only)/90mA quiescent plus 20mA alarm @24Vd.c. (in remote mounting box) Dimensions: 150H x 140W x 90D mm Operating Temp.: 0C to +39C Humidity: 10-95% RH, non condensing

Detector Displays

516.018.104 VRT-400 Remote scan display including 7 relays 516.018.107 (571.083) VRT-700 Remote scanner display - no relays 516.018.108 VRT-800 Remote scanner display with 12 relays

516.018.102 VRT-200 Remote display including 7 relays 516.018.106 (571.082) VRT-600 Remote detector display- no relays 516.018.119 VRT-J00 Compact Display c/w 7 relays 516.018.120 VRT-K00 Compact Display no relays

516.018.103 (571.104 ) VRT-300 Remote VESDAnet socket Page 56

516.018.101 (571.084) VRT-100 Remote programmer

LaserPLUS Standard 19 Inch Sub-Rack Remote Display Assemblies

Technical Specification Dimensions: 128H x 482W x 120D mm Product Codes 516.018.201 VSR-2000 19 Sub-rack with 1 detector display and 3 blanks 516.018.203 VSR-2210 19 Sub-rack, 2 detector displays, programmer and 1 blank 516.018.204 VSR-2221 19 Sub-rack with 3 detector displays and programmer 516.018.206 VSR-2222 19 Sub-rack with 4 detector displays

The 19 sub-rack is available as a mounting option, with 4 mounting slots for display or programming modules.

LaserPLUS Components for Ordering Custom Built Remote Display Sub-racks

specified at time of ordering (e.g. 2 x VSU-0 and 2 x VSU-2 configured as VSR-0022) Note: The order of the numbers (e.g. 0022) indicates the order in which the sub-units will be mounted in the sub-rack housing when looking from the front of the unit - from left to right Product Codes 516.018.260 VSU-0 Blank Sub-unit 516.018.261 VSU-1 Programmer sub-unit 516.018.262 VSU-2 Detector display sub-unit plus 7 relays 516.018.264 VSU-4 Scanner display sub-unit plus 7 relays 516.018.265 VSU-5 Blank sub-unit with 7 relays 516.018.214 VSU-E Blank scanner sub-unit with 7 relays 516.018.268 VSU-8 Scanner display sub-unit with 12 relays 516.018.269 VSU-9 Blank display sub-unit with 12 relays 516.018.219 VSU-J Compact display sub-unit plus 7 relays 516.018.210 VSR-CUSTOM Custom sub-rack housing includes cost of custom building 4 VSU sub-rack units.

Sub-rack configurations other than those available as standard can be supplied as custom built units. The sub-rack and cost of assembly are included in the VSR-CUSTOM. The configuration of the custom built unit must be

LaserPLUS Standard 19 Inch Rack Remote Display Assemblies

Standard rack enclosures are available to fit 2 (see picture) or 5 sub-rack assemblies. Technical Specification Dimensions: 020-052 400H x 600W x 220D mm 020-055 800H x 600W x 220D mm 020-050 300H x 400W x 140D mm Product Codes 516.018.301 020-052 19 Rack enclosure (2 rows) 516.018.302 020-055 19 Rack enclosure (5 rows) 516.018.303 020-050 IP65 Enclosure

LaserPLUS Ancillaries & Power Supply Unit

A variety of other ancillaries are available. Tyco Safety Products stock pipe and sampling points. Product Codes 517.017.005 Sampling point label 517.017.006 Aspirating pipe label 516.018.402 (571.086 ) VHX-0200 PC link HLIplus leads (MK2) 516.018.403 (571.089 ) VSW-004 VConfig Basic software 516.018.401 (571.085) VHH-100 Hand held programmer plus leads Available on request VSW-005 VConfig Pro software 516.018.404 (571.090 ) VSW-002 Aspire Windows software 516.018.407 VESDA 24Vd.c., 2A Power supply and charger

Page 57

LaserPLUS Spares
The following common VESDA LaserPLUS spares are kept in stock by Tyco Safety Products. Other spares can be supplied if required. Product Codes 516.018.501 VSP-002 Display (spare) 516.018.502 VSP-004 Scanner display (spare) 516.018.503 VSP-001 Programmer (spare) 516.018.505 VSP-019 Filter cover door (spare) 516.018.506 VSP-006 Spare detector chassis and manifold 516.018.508 VSP-008 Spare remote termination card 7 relays 516.018.509 VSP-009 Spare scanner chassis and manifold 516.018.514 VSP-014 Spare header termination card 7 relays 516.018.515 VSP-015 Spare aspirator fan

516.018.504 VSP-005 Filter cartridge (spare)

VESDA International Language Decals

All VESDA LaserPLUS products are currently supplied from stock in Tyco grey with English labels and software. Labels can be easily changed to any of the languages below. Alternatively, where large quantities are involved Tyco Safety Products can arrange for special delivery of pre-labelled products - extra delivery time must be allowed.

Language Swedish German

VESDA Scanner 516.018.270 571.088

VESDA Detector 571.087

Page 58

Special Hazard Detectors S200 Plus Triple IR Solar Blind Flame Detector
Terminals provided for Remote LED connection BASEEFA (CENELEC) certified Meets the requirements of EN54 Pt10 FM, DNV and LRS certified Very low power consumption (0.35mA) Models available with Conventional or Analogue Addressable interface (requires 2 core cable only) Models also available with relay or 4-20mA outputs Patented dual filter solar blindness for complete solar blindness 100field of view on IS versions 90 field of view on Flameproof versions Unlike other flame detectors on the market the MINERVA S200 PLUS is available in both Intrinsically Safe (EEx ia) and Flameproof (EEx d) models. The intrinsically safe models are suffixed by the letter " i " and meet the requirements of EN50020 part 7 and are BASEEFA certified EEx ia IIC T5. As part of an intrinsically safe circuit, it is suitable for zones 0,1 and 2 where group IIC gases or lesser hazards can be continuously present in explosive concentrations. The flameproof models are suffixed by the letter "f" and meet the requirements of EN50018 and are BASEEFA certified EEx d IIC T6. The detectors are suitable for zones 1 and 2 where group IIC gases or lesser hazards can be intermittently present in explosive concentrations. 3 x 20mm Bright Stainless Steel 316 (external & internal) to B S 1449 Pt 2 Tag Label: Stainless Steel 316 Range: 0.1m2 petrol at 50m 0.4m2 petrol at 60m Response Time: Field Selectable 3,6 and 12s Sensitivity: 3 range settings Relative Humidity: 95% (100% intermittent) Enclosure to: IP 66 and IP 67 For information on flame detector test equipment, please refer to the detector test equipment section. Approvals BASEEFA Approved models are suffixed 1. NSTC: Approved LPCB: Approved LRS: Approved DNV: Approved KFEIC: Approved SSL: Approved MCA: Approved FM Approved models are suffixed 2. . Datasheet - Product Code PSF102 Minerva S200 Plus Series Gland Entry: Metal Parts:

The MINERVA S200 PLUS flame detectors are the latest Infrared solar blind and multi-channel infra-red flame detectors with low power consumption and high false alarm immunity. The MINERVA S200 PLUS range of advanced flame detectors is the most comprehensive range available. Features Triple waveband infrared solar blind flame detection for optimum false alarm immunity Unrivalled black body rejection over a wide range of source temperatures Range adjustable to 50 metres for a 0.1m-2 petrol pan fire Discrimination of optical faults (dirty windows) from other faults by the built-in self test Housing designed for easy installation of cabling Flexible mounting and angular adjustment 3 x 20mm field cable entries IP66/67 housing designed for external use Rugged stainless steel ANC4 LM25 alloy housing and mounting bracket Operating temperature range of -40 to + 80C Variable response times and sensitivity settings Remote self test and range setting True window test in detection area (i.e. not in the edge of the window)

Technical Specification Detector Material: Stainless Steel 316L Dimensions: 167H x 167W x 89D MM Weight: 4.5Kg Approvals

Conventional S231i+ S231f+ S232f+ S241i+ S241f+ S251i+ S251f+ S252f+ S261f+ S262f+

Interface 4-20mA

Addressable

Relay

BASEEFA Ex ia

Ex d

FM Ex d

Product Codes 516.037.004 516.037.003 516.037.015 516.038.004 516.038.003 516.039.004 516.039.003 516.039.015 516.040.002 516.040.012

S200 Series Test Equipment

Product Codes 592.001.016 T210 Test source for use with (517.001.224 ) Solo 704 Adaptor Tube B and Solo 100/101 Poles (517.001.230/226) 592.001.014 T210 Adaptor required for the T210 to be used with S200 and S200 Plus Flame detectors Datasheet - Product Code PSF60 T110/T210 Test Source Manual - Vol01A-01-G1 Detectors Fire Manual

Page 59

S111 and S121 Series Flame Detectors

Built in response indicator High immunity to smoke, dust and grime Technical Specification Material: Impact resistant moulded plastic (light grey) Dimensions: 160H x 80W x 60D mm (without bracket) Weight: 0.6Kg Gland Entry (S121): 1 x 20mm Range: 0.1m2 petrol at 20m 0.4m petrol at 40m Field of View: 85 min inclusive Response Time: 3 secs min, 5-10 secs typical Supply Voltage: 15.5 to 25.5Vd.c. Quiescent Current: 100A max. at 20Vd.c. Alarm Current: 60 mA max Operating Temp.: -30C (-40C with reduced range) to + 70C Storage Temp.: -40C to + 80C Relative Humidity: 95% (100% intermittent) Enclosure to: IP65 Classification: BASEEFA EEx ia IIC T5 Suitable for use in zones 0,1 and 2 where group IIC gasses or lesser hazards are present in explosive concentrations. BASEEFA Cert No.: Ex 812333 Connections S111 Milspec plug sealed into body Milspec mating socket with 2m of 4 core PVC insulated, braid screened PVC sheathed cable to DEF Std 61-12 Pts 4 S121 One 4 way, 2.5 mm heavy duty terminal block Product Codes 516.009.006 S111 Infra-red Flame detector solar blind plug and socket connection 516.009.008 S121 Infra-red Flame detector solar blind screw terminal connections 516.009.014 S121 Infra-red Flame detector solar blind screw terminal connections (Pyrotronics) FM Approved 516.009.007 S112 Infra-red Flame detector non solar blind plug and socket connection 516.009.019 S122 Infra-red Flame detector non solar blind screw terminal connections (Pyrotronics) Datasheet - Product Code PSF22 S111/121 Infra Red Flame Detector Manual - Vol01A-04-D1/D2/D3 Detectors Fire Manual

The S111 and S121 (and variants thereof) are single sensor infra-red flame detectors with optical filtering, suitable for use outdoors in a wide range of applications. Specifically designed for use in the demanding environments of the onshore petro-chemical industry, the S111 and S121 detectors incorporate an abrasion resistant sapphire window in a protective housing to meet IP65. Features No false alarms from welding, sunlight or high intensity lamps Low maintenance costs Quick response to carbon fires Good performance (20m) Completely solar-blind for use outdoors High sensitivity with exceptional interference rejection BASEEFA approved EEx ia IIC T5 Housing protection to IP65 Integral stainless steel 316 mounting bracket 2 core interface to conventional fire systems

S131 Flame Detectors

conditions. The S131 Infra-red Flame Detector uses the same optical and electronic module as the S111 and S121 detectors. It therefore has near identical performance characteristics making it completely blind to solar radiation whether direct, reflected or modulated. Technical Specification Material: G.R.P. Anti-static, black Dimension: 160H x 160W x 90D mm (without bracket) Weight: 2.85 Kg (including bracket) Gland Entry: 2 x 20mm Range: 0.1m2 petrol at 20m 0.4m petrol at 40m Field of View: 90 min inclusive Response Time: 3 secs min 5-10 secs typical Product Codes 516.009.023 S131 Infra-red Flame detector solar blind 516.009.028 S131 Infra-red Flame detector solar blind Pyrotronics Datasheet - Product Code PSF58 S131 Flame Detector Manual - Vol01A-04-D4 Detectors Fire Manual

The S131 has been specially packaged in a tough GRP anti-static housing with abrasion resistant sapphire windows and protection against water ingress under sustained, high wind driven

S161 Flame Detector

completely blind to solar radiation whether direct, reflected or modulated. In order to meet the demands of arduous environments, such as chemical plants and off-shore oil and gas platforms, the S161 detector has been packaged in a tough G.R.P. anti-static housing, which makes it mechanically similar to the S131 detector. Two 20mm cable entries and two 4-way terminal blocks are provided, which eliminate the need for a local junction box, reducing installation costs. When using the existing Exd wiring associated with UV detectors, the use of BASEEFA certified Ex e glands is mandatory. Technical Specification Supply Voltage: 18.0V to 24.0 V d.c. (polarity conscious) Quiescent Current: 100 A max. at 20V d.c. Alarm Current: 2-wire, latching. 720 ohm in series with typically 4V switched across supply Alarm Indication: Connections: Red LED Two 4 way 2.5mm heavy duty terminal blocks Hazardous Area: BASEEFA Ex e s ib IIC T5. Suitable for use in zones 1 and 2 where group IIC gases or lesser hazards are sometimes present in explosive concentrations. BASEEFA Cert. No: EX87Y 3550 Product Code 516.009.022 S161 Infra-red Flame detector solar blind complete with built in intrinsically safe isolation. Datasheet - Product Code PSF59 S161 Flame Detector Manual - Vol01A-04-D5 Detectors Fire Manual

The S161 Infra-Red Flame Detector is specifically designed to replace installed UV units using existing Ex d wiring, making replacement highly cost effective. The S161 Infra-Red Flame Detector uses the same optical and electronic module as the S111, S121 and S131 detectors. It therefore, has identical performance characteristics making it Page 60

S100 Series Test Equipment

Product Codes 592.001.012 T110 Test Source for use with (517.001.224 ) Solo 704 adaptor tube B and Solo 100/101 poles (517.001.230/226 ) 592.001.005 T110 Adaptor for S131/161 592.001.010 T110 PP9 Battery and Charger kit 592.001.011 T110 Carrying case (not suitable for T210) Datasheet - Product Code PSF60 T110/T210 Test Source Manual - Vol01A-01-G1 Detectors Fire Manual

S100/200 Series Flame Detectors Mounting Bracket

Technical Specification Weight: 1.1Kg Dimensions: 202H x 130W x 72D mm Construction: SS316 to BS1449 Pt. 2 Axial Rotation: Elevation: Fixing: 360o 80o M8 bolts Product Code 517.001.184 Flame detector bracket assembly (Stainless Steel) for use with all S100/200 Series detectors Datasheet - Product Code PSF76 S200 Series Intrinsically Safe Flame Detectors

Omniguard 860 UV/IR and 660 UV Flame Detectors

The S660 and S860 Series Flame Detectors are suitable for use in Class I, Division 1, Groups B, C and D (explosion-proof) areas and Class II, Division 1, Groups E, F, and G (dust-ignitionproof) areas. The housings are NEMA 4, dusttight and watertight. The detectors are approved for both indoor and outdoor installations. Features Microprocessor Based. 0 to 60 seconds user adjustable time delays. User adjustable latching or non-latching fire relays. User adjustable sensitivity & NO or NC relay outputs. LED indication: fire (red), fault (amber). Transient voltage (surge) protection. RS485 addressable user interface. Two seconds or less to a 2 ft. x 2 ft. fire of JP4, JP-8, Jet A, Jet B, AVTUR and AVGAS at 100 feet. Three seconds or less to a 10 ft. x 10 ft. fire of JP-4, JP-8, Jet A, Jet B, AVTUR and AVGAS at 250 feet. 120 degree horizontal field-of-view 0 to 20 mA output & Relay contacts rated at 2 Amps @ 30 Vd.c. (Resistive). Technical Specification Operating Temperature: Storage Temperature: Product Codes 516.060.021 Meggitt Avionics Omniguard 860 UV/IR flame detector with self test. Stainless Steel construction and 3/4" standard connection 516.060.022 Meggitt Avionics Omniguard 860 UV/IR flame detector with self test. Aluminium construction and 3/4" standard connection. Yellow finish 516.060.025 Meggitt Avionics Omniguard 660 UV flame detector with self test. Stainless Steel construction and 3/4" standard connection 516.060.026 Meggitt Avionics Omniguard 660 UV flame detector with self test. Aluminium construction and 3/4" standard connection. Yellow finish 517.060.001 4651045 Meggitt Avionics swivel bracket in black. For use with Aluminium body detectors 517.060.002 70991 Meggitt Avionics swivel bracket in stainless steel. For use with Stainless Steel body detectors 517.060.003 540 Model 540 hand held UV/IR test gun for use with 860 Series detectors 517.060.005 Airshield for Omniguard S660 and S860 Flame detectors Datasheet - Product Code PSF103 S860 UV IR Flame Detector and PSF104 S660 UV IR Flame Detector

These detectors allow UV and UV/IR flame detection to be offered where specifically specified or in the few applications where the S200 Plus Triple IR flame detector is not suitable, such as metal fires. The 860 UV/IR flame detector replaces the existing S850 UV/IR flame detector. All aluminium detectors are now available in MINERVA yellow. Stocklisted Omniguard sensors are available with automatic self-test, latching fire relays and 3/4" NPT gland conduit entries. The Omniguard 660 and 860 Series Flame Detectors are optically based, self-contained, microprocessor controlled, ultraviolet/infrared (UV/IR) and high-speed ultraviolet (UV) flame detectors. The S860 Flame Detector utilises the patented Fire Event Analysis (FEA) discrimination technology. All electronics are housed within a copper-free aluminum, high temperature, TGIC-Polyester coated enclosure with a 3/4-14NPT entry. A stainless steel enclosure is also available.

-40F to +185F (-40C to +85C) -85F to +212F (-65C to +100C)

Page 61

Intrinsically Safe Point Detectors

Features Conventional and addressable I.S. systems Suitable for worst case (EEx ia IIC T5) Tyco High Performance Optical (HPO) smoke detector Compatible with S231i+ plus flame detector Compatible range of I.S. callpoints The System Designer must be familiar with BS5345, EN50 and BASEEFA certification and have successfully completed an Appropriate recognised course in Intrinsic Safety. Design of the system requires that the designer has all the information concerning the installation correctly documented. The nature of the Hazard must be defined by the customer and a survey carried out to determine the proximity of the safe area to establish cable runs. The probability of a flammable mixture being present is defined by a Zone Number. Flammable gases are classified in Groups and their minimum spontaneous ignition temperature is categorised by Class. Tyco Safety Products supplied equipment marked EEx ia IIc T5 would be suitable for use in worst case conditions. Eg. Zone 0 (ia), Hydrogen (IIc), T5 (100 deg C). The Fire Alarm Equipment and Safety Barriers should be placed as near as possible to the containment wall of the Hazardous Area. This minimises the cable lengths between the barrier and the Hazardous Area and thus the capacity to store energy. Technical Specification - M300/500Ex (Including base) MF500 102.6Dia x 90H 0.3Kg/0.33Kg -20oC to +70 oC MR500 102.6Dia x 96H 0.3Kg/0.33Kg MD500 102.6Dia x 89H 0.28Kg/0.30Kg MS300/MS500 102.6Dia x 74.5H 0.275Kg -10oC to +60 oC

Dimensions Weight Temperature Humidity

-20oC to +70 oC -20oC to +70 oC 95% Non-condensing

M300 BASEEF A Cert. No.: EX88B2168X M500 BASEEF A Cert. No.: EX89C2200X M300Ex bases are CSA Approved Certificate No.: 2017002500004454 In order that an Installation will comply with the BASEEFA certification designated for each system it is essential that the certified devices are connected with cables of the specified limits. These limits have been certified for specific classifications of hazard in order that energy storage is limited. The number of devices connected to the barrier and located in the Hazardous Area must always be limited to not more than the listed maximum. When a mixture of devices is connected to any one zone the numbers must be reduced in proportion to the ratio of the load presented to the barrier. When a System includes the use of either IF500Ex, S231i+ or S251i+, it must be remembered that the load they present to the circuit is twice that of a detector. A mixture of large and small load devices connected to a zone will require a calculation for the number of allowed detectors. There are two I.S. systems used by Tyco Safety Products. System 601 and System 602 System 601 is for use in conventional fire detection circuits, and System 602 is for use with MINERVA analogue addressable circuits. Two Sounder Systems, (one earthed and one isolated), are available and either can be used with System 601 or System 602. Datasheet - Product Code PSF64 Series 300/400/500 Fire and Smoke Detectors Manual - Vol01A* Detectors Fire Manual * Section is indicated next to the product code.

Ion Chamber Smoke Detectors

The ion chamber detector [type MF501EX/MF601Ex] will respond very quickly to smoke composed of very small particles - even those invisible to the naked eye but may respond appreciably slower to dense smoke composed of large particles. Product Codes 516.030.002 (Vol 01A-03-D3) MF501Ex Analogue Addressable Ion Chamber smoke detector 516.050.004.Y (Vol 01B-04-D10) MF601EX Conventional Ion Chamber Smoke Detector

High Performance Optical Smoke Detectors

Product Codes 516.031.005 (Vol 01A-03-D11) MR501TEx Analogue Addressable High Performance Optical smoke detector 516.054.011.Y (Vol 01B-04-D12) MR601TEX Conventional High Performance Optical Smoke Detector

The MR501TEx/MR601TEX have been developed to overcome the slower response of the optical detectors to hot burning fires, by increasing the sensitivity of the optical detector when it is associated with a rapid change in temperature. In this way it is intended to become a detector

which can cover some of the risks currently covered by ion chamber detectors. Smoke detectors will not detect burning alcohol or other clean-burning liquids which do not generate smoke particles.

Page 62

Optical Smoke Detector

The photoelectric scatter type of detector [MR501Ex] will respond quickly to large particle smoke and possibly ignore the small particle smoke. Product Code 516.031.002 (Vol01A-03-D4) MR501Ex Analogue Addressable Optical Smoke Detector

Heat Detectors

If environmental conditions rule out the use of smoke detectors, then a heat detector of the type MD501Ex/MD601Ex/MD611Ex Range may provide an acceptable, though less sensitive, alternative. For general use, and particularly where the ambient temperature may be low, a 'Rate-of-Rise' heat sensor is to be preferred. This type of sensor reacts to abnormally high rates of change of temperature and provides the fastest response over a wide range of ambient temperatures. A fixed temperature limit is also incorporated in these detectors.

In many environments, e.g. kitchens and boiler rooms, sudden, large changes in temperature are considered 'normal'. Rate-of-rise detectors are generally not suitable in these cases and fixed temperature [static] types should be used.

Product Codes 516.033.002 (Vol 01A-03-D6) MD501Ex Analogue Addressable Heat detector 516.052.051.Y (Vol 01B-04-D11) MD601EX Conventional Rate of Rise Heat Detector 516.052.041.Y (Vol 01B-04-D11) MD611EX Conventional Fixed Temperature Heat Detector

Flame Detectors
on a ceiling to trap the products. They can, therefore, be used to protect large open areas without sacrificing speed of response to flaming fires. In order to ensure full coverage, however, flame detectors do require direct line of sight to all parts of the protected area. Infra-red flame detectors such as the MS302Ex and MS502Ex are designed to respond rapidly to fires which involve clean-burning fuels such as alcohol or methane, i.e. fires which would not be detected by smoke detectors. The MS302Ex and MS502Ex Flame Sensor, by virtue of its operating wavelength and flicker discrimination, are insensitive to normal environmental influences. For outdoor use however, or in the presence of very strong infra-red sources, a solar-blind detector [e.g. the type S200 Plus] should be used. The MS302Ex and MS502Ex Flame detectors should, normally, only be used inside buildings to supplement heat and smoke detectors. Product Codes 516.022.001 (Vol01A-02-D6) MS302Ex Infra-red flame detector (See S100 Flame detector test equipment) 516.032.001 (Vol01A-03-D5) MS502Ex Addressable Infra-red flame detector (See S100 Flame detector test equipment)

Flame detectors, unlike smoke and heat detectors, do not rely on convection to transport the fire products to the detector nor do they rely

Carbon Monoxide Detector

sleeping risks, the CO fire detector is also well suited to many applications where heat detection is insufficient but smoke detection causes false alarms. As CO travels more freely than smoke, the positioning of CO fire detectors is more flexible. This feature is particularly useful in large complex structures such as atria and warehouses, where positioning of smoke detectors is difficult. Product Code 516.058.002.Y (Vol 01B-04-D13) MU601EX Conventional Carbon Monoxide Detector

The CO Fire detector is a unique general purpose fire detector which provides very early warning of slow smouldering fires. Ideal for

Page 63

Enhanced Carbon Monoxide Fire & Heat Detector

The MDU601EX detector combines the features of both the MU601EX detector and the MD601EX detector to provide a combined CO and Rate of Rise Heat Detector where the sensitivity of the CO detector is enhanced in response to a fast rate of change of temperature. Product Code 516.016.001.Y (Vol 01B-04-D14) MDU 601EX Enhanced Carbon Monoxide Fire & Heat Detector

M300/500/MUBEX Detector Bases and Ancillaries

Product Codes 517.025.002 M300Ex Mounting base 517.035.002 M500Ex Mounting base 517.025.010 M300/M500 Base lock kit 517.050.610 MUBEX Mounting Base

517.025.022 MB35 Flush mounting kit for M300/400/500 series 517.035.006 M500 Protective cover 517.001.231 DHM69 Deckhead mounting kit. This deckhead mounting is also suitable for 300/500 series detectors. 517.001.120 System 601 EOL Unit (Pk 10)

Olsen T54B - Point Type Heat Detector

Classified as a simple device, the T54B can be used in Zone 0 areas when connected to a suitable intrinsically safe barrier. For reliable operation, it is recommended that T54B detectors have set points 20 oC or 20% (whichever is higher) above the maximum temperature they will be exposed to in normal operation. Preferred factory preset temperatures are: 60, 90, 100, 145 oC; normally with open contacts. Technical Specification Operating voltage @ 0.5A: 240Va.c. to 24Vd.c. Switching Current: 5 to 500mA Contact Resistance: <1 ohm Actuating Temp.:(factory set) 60 to 240 oC Fixed Temp. Only: *Type E Accuracy: + or - 5% Ambient Temp.: -40 to +270 oC Relative Humidity: 100% RH Protection Category: IP67 Thread Size: M20 x 1.5mm Product Codes 516.033.011 T4E60X T54B Point Type heat detector - 60 oC 516.033.012 T4E90X T54B Point Type heat detector - 90 oC 516.033.013 T4E100X T54B Point Type heat detector - 100 oC 516.033.014 T4E145X T54B Point Type heat detector - 145 oC Other temperatures and normally closed contacts are available by request. 514.001.017 IF500Ex Intrinsically safe addressable interface suitable for T54B probes Datasheet - Product Code PSF24 System 601/602 for Hazardous Areas

Constructed from stainless steel, the T54B is an extremely rugged heat detector that can be used to detect fires in the harshest of environments. The T54B can be used in environments with ambient temperatures up to 200 oC and, being hermetically sealed, is impervious to most contaminants. The T54B is suitable for use in areas with explosive atmospheres. Certified as a flameproof (Ex d) device, it can be used in Zone 1 and Zone 2 hazardous areas when installed using flameproof mounting enclosures and conduit.

Page 64

H Series Heat Detectors

Self re-setting Special versions can be used in any Zone 1 or Zone 2 environment Grade 3 to European Standard EN54 Part 5 1977 Technical Specification Operating Voltage: up to 24V d.c. Quiescent Current: zero Alarm Current: Limited by internal 390 ohm or 50 ohm resistor Dimensions: 82mm dia x 41mm Weight: 73gm Material: Cycolac ABS Operating temp. range: -20 oC to +100 oC Relative Humidity: up to 100% RH (Non Condensing) Alarm Temp: H6XX: 60oC H9XX: 90oC Product Codes 517.001.130 DHM8 (including 2 x 20mm glands) 516.014.017 H600 60oC Fixed temp. Grade 1 516.014.021 H601 60oC Fixed temp. Grade 1 (Remote LED Ind.) 516.014.019 H602 60oC Fixed temp. Grade 1 (Integral LED Ind.) 516.014.025 H604 60oC Fixed temp. Grade 1 (Integral LED Ind.) Intrinsically Safe - Simple Apparatus 516.014.018 H900 90oC Fixed temp. Grade 1 516.014.020 H902 90oC Fixed temp. Grade 1 (Integral LED Ind.) 516.014.026 H904 90oC Fixed temp. Grade 1 (Integral LED Ind.) Intrinsically safe - Simple Apparatus Datasheet - Product Code PSF108 H Series Fixed Temperature Detectors

The and H900 range of fixed temperature heat detectors are designed to operate at 60oC and 90oC respectively. They are particularly suited to areas where rapid changes in temperature and/or high ambient temperature exist, together with unsuitable environmental conditions for smoke detectors. This makes the detectors ideally suited for galleys, laundries etc. Features Approved by Marine classification authorities Two wire supervised circuit Draws no quiescent current

SM87BG/CP530 Explosion Proof Addressable Callpoint

The SM87BG/CP530 is based on the popular MEDC SM87BG explosion proof EEx d callpoint break glass and is BASEEFA approved under the Tyco brand name with an integral CP530 addressable callpoint module suitable for use on all MINERVA 8,16E and 80 analogue addressable systems. Technical Specification MEDC Reference: SM87BGLAD1R1L0NR Material: LM25TF Marine Grade Alloy Certification: EExd IIC T6 IP rating: IP67 BASEEFA No.: SM87 ADDRESSABLE UNIT C (A) Ex85B1037 Weight: 2.7kg Dimensions: 122H x 122W x 105D mm Mounting Holes: 4 x 9mm diameter (105 x 105mm centres) Entries: 1 x M20 ISO right hand side plus 1 x M20 ISO left hand side Text: FIRE - BREAK GLAS S Finish: Red Epoxy Paint Tag label: None fitted as standard NOTE: Stainless steel option available, contact Product Management Department, Sunbury for more details. Product Codes 514.001.055 (Vol08A-02-D34) EExd MEDC SM87BG heavy duty alloy breakglass with integral CP530 potted addressable module 514.001.056 Spare glass and O ring assembly for SM87BG

BG3 Weatherproof and Intrinsically Safe Conventional Callpoint

This manual fire alarm call point is designed in accordance with the latest draft European Call Point Standad (EN54-11). Weatherproof to IP66 and available certified intrinsically safe, simple apparatus or uncertified, the units are manufacured from glass reinforced polyester (GRP) which provides a robust, corrosion free construction and ensures effective and reliable operation in harsh industrial and offshore environments. Units are supplied in self coloured GRP with a Burning House duty label as standard.
MODEL PROTECTION BG3I Explosion Protected EExia (Intrinsically Safe) CENELEC EN50014, 020 BASEEFA EExia IIC T4 Cert No. BAS00ATEX1067X Suitable for use in Zones 0,1, & 2 Up to 28V (IS) -55C TO +55C IP66 EN54-11 6 X 4.0mm 2 Simple Apparatus/BG3W Dust-tight & Weatherproof

Product Codes 514.001.059 Intrinsically Safe Callpoint (BG3I4NBN) 514.001.061 Simple Apparatus Callpoint (BG3W4NBN) 514.001.058 Weatherproof Callpoint (BG3W4LBN)

CERTIFICATION VOLTAGE CERTIFIED TEMPERATURE INGRESS PROTECTION EUROPEAN STANDARD FOR CALLPOINTS TERMINALS

Not Applicable Up to 250 V a.c. Not Applicable IP66 EN54-11 6 X 4.0mm 2 DC: 0 - 30V 3A resistive or inductive 30V - 50V 1A resistive or inductive AC: 0 - 250V 3A resistive or inductive 2 X M20 Top or Bottom 0.5Kg UV resistant glass reinforced polyester Natural Red GRP

SWITCH RATINGS CABLE ENTRIES WEIGHT MATERIAL FINISH

Not Applicable 2 X M20 Top or Bottom 0.5Kg UV resistant glass reinforced polyester Natural Red GRP

Page 65

Intrinsically Safe Callpoints

A variety of Ex ia Intrinsically safe callpoints are available as standard using KAC and MEDC callpoint housings. The CP220Ex is a conventional callpoint for use on BASEEFA Certified System 601. System 601 is compatible with MINERVA 1 to 4, System 1700, NT & MINERVA Addressable DM modules. CP220Ex Dimensions(H x W x D mm) Weight Material Conventional Addressable Colour 87 x 87 x 51.5 200g Polycarbonate Yes No Red The IF500Ex is an Intrinsically safe addressable interface module. It can be used to interface simple apparatus to MINERVA analogue addressable systems, designed to BASEEFA Certified System 602. The IF500Ex can interface to devices such as H Series detectors & T54B heat probes. In addition CP540Ex 87 x 87 x 51.5 200g Polycarbonate No Requires IF500Ex Red CP950Ex 126 x 120 x 118 1.2Kg Polyester No Yes Red 89C2202 IP66 & 67 the CP540Ex is specifically designed for use with the IF500Ex. The IF500Ex is fitted inside the CP950Ex and the IF520Ex and BASEEFA Certified as integrated units.

IF520Ex 122 x 122 x 118 4.1Kg Stainless Steel No Yes Red 89C2202 IP66 & 67

IF500Ex 122 x 120 x 90 900g Polyester No Yes Grey 89C2202 IP67

BASEEFA Cert. Simple Apparatus Simple Apparatus IP Rating IP67 IP67 Note: Variants are available on request Datasheet - Product Code PSF24 System 601/602 for Hazardous Areas Manual - Vol08A-02-D11/D31/D32 Ancillaries Manual

514.001.009 CP220Ex Red Callpoint intrinsically safe for use with BASEEFA certified conventional system 601. Simple apparatus marking

514.001.023 CP540Ex Red callpoint intrinsically safe for use with IF500Ex. Simple apparatus marking

514.001.017 IF500Ex Intrinsically safe addressable interface module. May be used to interface simple apparatus switch callpoint to MINERVA analogue addressable system. For use on BASEEFA certified System 602 Product Codes 515.001.041 Spare key for IF520Ex callpoint and other SM87PB models 517.001.120 System 601 EOL Unit (PK10)

514.001.052 CP950Ex MEDC weatherproof intrinsically safe callpoint with integral analogue addressable module

514.001.053 IF520Ex EExia MEDC SM87PB Stainless steel heavy duty intrinsically safe callpoint push button with integral IF500Ex analogue addressable module

Page 66

Intrinsically Safe Barriers and Housings

The following section relates to a range of intrinsically safe barrier and isolator equipment for use with Tyco Safety Products manufactured fire detection systems. It essentially encompasses the relevant MTL 5000 and MTL 7000 series barriers plus the associated housing options as an alternative to existing MTL 700 and MTL 3000 series equipment. On all issues of intrinsically safe systems design, please refer to Manual 26A for guidance. Datasheet - Product Code PSF24 System 601/602 for Hazardous Areas Manual - Vol026A-02-D1 Intrinsically Safe Systems 601 & 602 Manual

Galvanic Barriers
MTL 5000
The MTL 5061 is a two channel interface for use with conventional fire and smoke detectors located in hazardous areas. This galvanic isolator is CE marked, and replaces the MTL 3043 barrier option. It is suitable for connecting loads in Zone 0, IIC, T4-6 hazardous areas if suitably certified. The MTL 5021 Isolating sounder driver enables an intrinsically safe sounder device located in the hazardous area, to be controlled from the safe area. The MTL 5021 barrier is designed as a CE marked replacement for the existing MTL 3021 barrier. It has one channel and is suitable for connecting loads in Zone 0, IIC, T4-6 hazardous area if suitably certified. When designing new systems or upgrading existing MTL 3000 series systems to MTL 5000 series, please use the appropriate MTL DX series enclosure equipment. Product Codes 517.001.244 MTL 5061 2 channel galvanic isolator for conventional detector zone - used on BASEEFA Approved System 601 517.001.245 MTL 5021 I.S. Sounder driver

MTL 3000
The MTL3000 series interface units offer a compact and easy-to-use means for communicating safely with conventional fire detectors and output devices in the hazardous area. The MTL3000 solution provides an alternative to the shunt-diode safety barrier where isolation is essential or preferred or a high integrity earth is not readily available. The MTL 3021 enables the intrinsically safe sounder type IS28 (576.501.013) to be activated from the safe area. An absolute maximum of 4 off I.S28 sounders may be connected to each MTL3021 unit. The MTL 3043 is used primarily with intrinsically safe conventional type (M300 series, H600 series, S100 series, S231i+ ) automatic fire detectors and the CP220Ex intrinsically safe callpoints. The MTL3043 is not suitable for use with addressable fire detectors. For application guidance, refer to the relevant documentation for system 601 and system 602. Product Codes 517.001.204 MTL3043 Galvanic Isolation safety barrier 517.001.203 MTL3021 Galvanic Isolation safety barrier

Zener Barriers
MTL 7100
The MTL 7100 Series intrinsically safe shuntdiode safety barriers are innovative devices designed to provide exceptionally high packing densities, straightforward installation and simplified connection, commissioning and maintenance facilities. The MTL 7100 Series include secondary replaceable fuses. These are useful where there is the possibility of faults occurring during commissioning, which would otherwise blow the barriers internal safety fuses. One secondary replaceable fuse for each barrier channel is provided and is lower in value than the safety related fuse. Fuses are packaged in small mouldings which can be latched in a disconnect position to break the safe and hazardous areas during commissioning, maintenance and fault finding, thus avoiding the need for additional disconnect terminals. Please note that this barrier is a direct alternative for the MTL 728+ barrier. Currently, there is no direct alternative for the MTL 788+ barrier used with the MINERVA addressable system. So addressable MINERVA systems must use the existing MTL 788+ barrier and associated housing option. Product Code 517.001.246 MTL 7128+ Zener safety barrier for conventional detection circuits designed in accordance with System 601

MTL 700
The MTL700 series are 1 or 2 channel devices which pass the electrical signal from fire detectors to the control panel or from the control panel to the output device. The barriers limit the amount of energy to a level that cannot ignite explosive atmospheres. The over-voltage protection provided by a Shunt-Diode Safety Barrier is with reference to the safety barrier earth connection. It is therefore imperative that a HIGH INTEGRITY EARTH is used for this type of barrier. Product Codes 517.001.201 MTL728 Single Channel Zener Safety Barrier. 517.001.202 MTL788 Dual Channel Zener Safety Barrier. 546.004.005 Intrinsically safe sounder circuit interface module

Page 67

Safety Enclosures
DX Series Enclosures
The MTL DX Series enclosure equipment is designed to house MTL 5000 isolating interfaces and MTL 7000 series shunt diode safety barriers. Enclosures are usually selected on the number of units they will accommodate. The following table shows the capacity of each of the enclosure types. Enclosure DX070 DX170 MTL5000 Isolators 16mm Pitch 4 (2*) 10 (8*) MTL7000 Barriers 7.5mm Pitch 9 (5*) 22 (18*) ProductCodes 517.001.248 DX070 Enclosure MTL 5000/7000 series barriers 517.001.247 DX170 Enclosure for MTL5000/7000 series barriers

* Use these figures when two IMB57 mounting brackets for tagging/earth rail accessories are included

UC Series Enclosures
The UC series of enclosures provides a simple but effective means of mounting and protecting the MTL3000 series units, in safe areas. A standard lightweight enclosure with transparent lid, which can accommodate 4 units. The polycarbonate enclosures are impact resistant, flame retardant, and dustproof to IP65. ProductCode 517.001.196 UC2 4, Way Barrier housing

MT Series Enclosures
The MT series of enclosures provides a simple, effective means of mounting and protecting MTL700 Series barriers in safe areas or low-risk hazardous areas. Three lightweight polycarbonate enclosures with see through lids accommodate up to 2, 5 and 12 barriers in the safe area. All the enclosures are supplied ready fitted with a nickel plated brass busbar mount, so barriers can be installed and wired up immediately without special tools. Product Codes 517.001.198 MT2 2,Way Zener Barrier Housing. 517.001.199 MT5 5,Way Zener Barrier Housing. 517.001.200 MT12 12,Way Zener Barrier Housing

Ancillaries
The ERL7 earth rail is a nickel plated 3 x 10mm rail (1 metre long), suitable for a do-it-your self mounting arrangement. It will accommodate up to 2.5 ETM7 earth terminals per barrier location for terminating earth returns and cable screens from the hazardous area. The IMB7 mounts on a flat surface or top hat rail (35mm) or G-profile rail and acts as a convenient method for mounting the earth busbar. Product Codes 517.001.205 ERL7 Earth rail I.S. systems 517.001.206 ETM7 Earth termination connection system 517.001.207 IMB7 Insulating mounting block 517.001.120 System 601 EOL Unit (PK10)

Page 68

Beam and Linear Heat Detectors Optical Beam Smoke Detectors

Selectable sensitivity Self-check and automatic compensation Manual or automatic reset Optional MINERVA loop powered interface module (LPBD 521) Suitable for both conventional and addressable fire systems Fire/fault interface to MINERVA controller Low current consumption Flexible system design options Robust metal construction Designed to conform to BS5839 Part 5 Product Codes 516.015.006.A FireRay2000 optical beam smoke detector VdS approved, ADT Branded 516.015.006.T FireRay2000 optical beam smoke detector VdS approved, Thorn Branded 920450 FireRay2000 -UL Optical beam smoke detector UL approved 516.015.007 FireRay2000 Retro-Reflector 100 x100mm 516.015.008 FireRay2000 Alignment tool Spares 515484 FireRay2000 Spare Transmitter 515485 FireRay2000 Spare Receiver 515487 FireRay2000 Spare Main PCB Datasheet - Product Code PSF85 Fireray 2000 Optical Beam Smoke Detectors Manual - Vol08A-02-D26 Ancillaries Manual Fireray 2000 +11.5 to +28Vd.c. 28V Loop Power <13mA <20mA Fireray LPBD521 -10oC to +55 oC -20oC to +70 oC up to 95% RH (Non-condensing) IP54

The FIRE-RAY 2000 is an active infra-red smoke detector. The system comprises of three base elements i.e. a transmitter, receiver and Control Unit. Analysis of the modulated infra-red beam by the Control Unit determines whether smoke is present, and if so generates an alarm signal. Features Range 5 metres up to 100 metres Area coverage up to 1400m 2 Technical Specification

Voltage RangeDimensions(mm) Height Width Depth 95 75 115 260 210 80 87 148 14 Weight (Kg) 0.4 2.25 0.1

Transmitter/Receiver Control Unit LPBD521 (with M520 encl.)

LPBD521 Fireray 2000 Quiescent Current Fireray 2000 Alarm Current Operating Temp. Range Humidity (Fireray 2000 & LPBD521) Fireray 2000 Enclosure

Fire-Ray 50/100R
Optional MINERVA loop powered interface module (LPBD521) Suitable for both Conventional and Addressable Systems Fire/Fault Interface to the Minerva Controller Low current consumption Flexible System Design Options Robust ABS Construction Designed to Conform to BS5839 Part 5, EN54 Part 12, UL and VdS The FIRE-RAY 50/100R is a reflective infra-red beam smoke detector. The system comprises of two base elements i.e. a combined infra-red transmitter and receiver in a common housing and a reflective prism. The electronics of the combined transmitter and receiver unit analyse the reflected beam from the prism for smoke and generates an alarm condition if a pre-determined level is reached. Technical Specification Dimensions(mm) Height Width Depth 210 130 120 87 148 14 +10.2 to +30Vdc 28V Loop Power <4mA @ 24Vdc 15mA Weight (Kg) 0.7 0.1 Product Codes 516.015.011 Fire Ray 50R 5 to 50 Metre Reflective Beam Detector 516.015.012 Fire Ray 100R 50 to 100 Metre Reflective Beam Detector

Transmitter/Receiver LPBD521 (with M520 encl.)

Features Range 5 to 50 metres (50R) Range 50 to 100 metres (100R) Area of coverage up to 750m (50R), 1500m (100R) Selectable sensitivity Self-check and automatic compensation Manual or Automatic Reset
2 2

Voltage Range - Fire Ray 50/100R LPBD521 Fire Ray 50/100R Quiescent Current Fire Ray 50/100R Alarm Current

Operating Temp Range -

Fire Ray 50/100R LPBD 521 IP50

-30C to + 55C -20C to + 70C

Ingress Protection (Fire Ray 50/100R)

Page 69

LPBD521 - Loop Powered Beam Detector Module

2000 beam detector units directly from the MINERVA loop. A single LPBD521 can be used to power the analyser unit, the beam receiver unit and the transmitter unit. Alternatively, two separate LPBD521's can be used with one to power the analyser unit and receiver units and the second to drive the transmitter separately, either from the same loop or a different loop. Up to 12 LPBD521's can be used per loop. The module is addressable and will therefore take one address on the loop. Technical Specification Powered: Loop Temperature Range: -20oC to+70oC Operating Humidity: up to 95% RH noncondensing Dimensions (PCB): 60H x 84W x 14D mm Product Code 557.180.217 LPBD521 loop powered beam detector interface module for use with FireRay 2000 Datasheet - Product Code PSF85 Fireray 2000 Optical Beam Smoke Detectors Manual - Vol08A-02-D26 Ancillaries Manual

The LPBD521 module is used to drive the FireRay

Linear Heat Detection

Features Easy and cost effective installation Good sensitivity with adjustable alarm threshold Open and short circuit monitoring Suited for outdoor and indoor applications Can be used in hazardous areas Mechanical protection is provided for cables in areas where damage may occur Chemical resistance sheathing is available for areas where petro-chemical corrosion may occur. Technical Specification Dimensions: 170H x 105W x 111D mm Weight: 0.55Kg Operating Temp: -25oC to +70 oC Relative humidity: Up to 98% RH noncondensing Rating: IP55 Operating Voltage: +8 to +30Vd.c. Quiescent Current: 60-80A Product Codes 516.016.005 LD40 High resistance sensor cable blue - 200M reel 516.016.006 LD40 High resistance sensor cable black - 200M reel (Nylon sheath suitable for petrochemical exposure) 516.016.010 LD40 EOL Termination kit 516.016.011 LD40 In-line Jointing kit 516.016.012 LD40 Analyser module with conventional detection zone interface. Requires a DM520 or similar zone module interface to MINERVA/TFX addressable loops Datasheet - Product Code PSF42 LD40 Linear Heat Detection System

The LD40 linear heat detection system is used to monitor fire (or overheat) conditions in confined or polluted areas or where there are adverse or unusually variable environmental conditions. The sensor cable is unaffected by dust, moisture or vibration and requires little maintenance.

Page 70

MXF Optical Fibre Temperature Sensing

Features Fibre optic sensor loop up to 2km Continuous temperature profiles of temperature on a PC Programmable functions Programmable number of fire detection zones Multiple and programmable Alarm levels per fire detection zone Variable rate of rise function Unrivalled response times This new technology uses a laser light source to launch light signals into an optical fibre. As pulses travel down the fibre, energy is lost through scattering. A fraction of the scattered signal is retained within the fibre. A portion of this is directed back along the fibre towards the laser source - this signal is called backscatter. Part of the back scatter signal (Raman Scattering) is used to provide accurate remote temperature measurements at hundreds of points along the fibre. The MXF100 uses standard communications grade optical fibre of the 62.5/125 graded index multimode type. The temperature range is predominantly a function of the coating used to protect the optical fibre as the fibre itself is well behaved over a temperature range from -50oC to approximately 300oC. Optical fibre itself offers several advantages as a sensing medium. The signals are immune to electromagnetic interference thereby ensuring integrity of readings from electrically noisy areas. As no electrical current is used in the sensing fibre and the fibre is relatively inert and dielectric (non-conducting) medium, it is safe technology to use in hazardous environments. Optional outputs Modbus Serial Data Direct to PC Volt free contacts Insensitive to EMI Intrinsically safe sensor Uses standard communications grade optical fibre Choice of cable construction Cable construction for extreme environments High System Integrity Automatic failure mode analysis Loop break recovery operation Diagnostic capability Fire progression monitoring No cable maintenance Modem for remote communications Supply Voltage: 24V d.c. (-6/+12V d.c.) Power Consumption:20W max Supply Current: <1A Fuse Rating: <2A (anti-surge) Fibre: 62.5/125 graded index multimode Operating Temp.: 0oC to +40 oC Storage Temp.: -40oC to +65 oC Humidity: 0 to 95% RH (noncondensing) Product Codes 516.016.111 MXF100 Fibre Optic Linear Heat Detection control unit c/w 3 tier wall mounted cabinet and PSU. 516.016.112 MXF-SL Sensor Line Thermoplastic sensor cable (1km reel) 516.016.113 MXF-SS Sensor Tube Stainless Steel Sensor Cable (1km reel). Datasheet - Product Code PSF111 MXF100 Optical Fibre Temperature Sensing Technology Technical Specification The MXF100 system complies with: EMCDirective 89/336/EEC Low Voltage Directive 72/2/EEC The MXF100 contains a Class 3a Laser product and complies with: BS7192 (1989) American National Standard Z136.2 (1988) International Electrotechnical Commission Standard 825 (1990)

MXF100 FUNCTIONAL BL OCK DIAGRAM

INTERNAL REFERENCE

FIBRE SWITCH

LASER & RECEIVER

OPTIC S CONTROL

OPTIC S
SIGNAL CONTROL

POWER SUPPLY

RELAY PCB1 RELAY PCB2 RELAY PCB3 POWER

DATA ACQUISITION

SIGNAL

DATA PROCESSOR

ELECTRONIC S
RS232 PORT 1 TO PC RS232 PORT 2 MODBUS OR SERIAL D ATA

24Vd.c.

RELAY CONNECTORS

Page 71

Detector Test Equipment Point Detector Testing/Commissioning Equipment

Manual - Vol01A & Vol01B Detectors Manual

Product Codes 517.001.230 SOLO100 Telescopic pole 1.26M to 4.5M long 517.001.226 SOLO101 Extension tube 1.13M long for use with 517.001.230 Telescopic extension pole 517.001.264 SOLO 610 Protective Carry/Storage Bag for Solo Detector Test Kit Product Code 517.001.255 SOLO330 Aerosol dispenser for use with all detector ranges. Connects directly to SOLO100/101 poles

Product Codes 517.001.254 SOLO461 Cordless heat detector tester kit including SOLO460 tester, SOLO720 battery batons and SOLO724 charger. (Connects directly to SOLO100/101 poles). 517.001.242 SOLO720 Spare battery baton for use with SOLO 450/460 tester 517.001.243 SOLO724 Spare mains/car battery charger for SOLO720 battery baton

Product Code 517.001.256 Suretest Solo aerosol tester can. For use with SOLO 330 dispenser. Non-flammable, ozone and environment friendly. Approx 200 tests per can

Product Code 517.050.004 M69 Detector changer for use with M600/M900 series. Requires Adaptor B and SOLO 100 pole

Product Codes 517.001.233 CO Detector field test kit with 24 brickets for use with SOLO 330 517.001.234 CO Fire detector field test kit spare bricks (Pack of 24)

Product Code 517.025.026 T35 Skirt changer tool for use with M300/400/500 series requires Adaptor B and SOLO100 pole

Product Code 517.001.224 SOLO704 Adaptor tube B - Adapts SOLO100/101 pole sets for TYCO detector changers and testers

Product Code 517.001.240 SOLO200 Universal detector changer for use with various manufacturers detectors - not suitable for M600/900 series low profile. Connects directly to SOLO100/101 poles

Page 72

SOLO TEST EQUIPMENT FOR POINT & FLAME DETECTORS

S200 Series Test Equipment

592.001.016 T210 Test source for use with (517.001.224 ) SOLO 704 Adaptor Tube B and SOLO100/101 poles (517.001.230/226 )

592.001.014 T210 Adaptor for S200 Detectors

S100 Series Test Equipment

592.001.012 T110 Test Source for use with (517.001.224 ) SOLO 704 Adaptor Tube B and SOLO100/101 poles (517.001.230/226 ) 592.001.010 T110 PP9 Battery and Charger kit 592.001.011 T110 Carrying case (not suitable for T210)

592.001.005 T110 Adaptor for S131/161 Detectors

Page 73

CP Series Callpoints
A comprehensive range of callpoints for use with both conventional and addressable systems. All the callpoints are designed to enable an alarm signal to be given by breaking a glass element, this operates a switch and is indicated by an LED indicator. If required, an optional transparent hinged cover may be installed to guard against accidental operation. Features Integral LED indicator for easy identification of operation Surface or flush mounting Extensive range of conventional and analogue addressable callpoints Test key facility, speeds maintenance visits Optional transparent hinged cover Hazardous areas models available (See Special Hazards Section) IP66 Waterproof models for external applications Technical Specification - (Indoor & Outdoor) Housing: Modified Polyphenylene Oxide[Noryl SE100] o o Operating Temp.: -20 C to +70 C Relative Humidity: up to 95% RH (noncondensing) Datasheet - Product Code PSF36 CP200 Series Break Glass Detectors Manual - Vol08A-02-D9/D10/D27 Ancillaries Manual

Commonly Used Callpoints

Model CP200 CP210 CP230 CP270 CP920 CP930 CP937 Keyswitch Colour Red Red Red Yellow Red Red Red White Type Conventional Alert Conventional Evacuate 44 Conventional Alert Conventional Evacuate 44 Addressable Addressable Addressable Conventional IP Range 44 66 44 66 55 44 R1/R2 Ohms 120/470 49/39 120/470 47/39 Not Applicable Not Applicable Not Applicable Not Applicable

Callpoint Dimensions
Indoor Callpoint Weight: 200g
87mm 51.5mm Although the callpoint can be fitted on a 16mm deep box this leaves little room for the conductors: A 25mm deep box is recommended. 15mm

Outdoor Callpoint (IP66) Weight: 400g

124mm 87mm

Red

Note: Contacts rated at 32Vdc @ 100mA

39mm 59mm

Conventional Callpoints
Typical Conventional Wiring Typically the conventional callpoint devices draw no current in the off state, but when activated, will present an alarm load to the fire detection control panel. The alarm load is defined by the internal resistance arrangement for the device.
OUT R2 R1 R2 R1

IN -

Addressable Callpoints
Typical Addressable Wiring
Loop IN OUT

Outdoor Callpoint (IP55)

Addressable callpoints contain an address unit enabling connection to the MINERVA Addressable range of fire controllers. The address unit includes a custom chip and a 7-way DIL Switch which is used to define the address of the callpoint.

79mm

+ -

123mm 110mm

Black

Red Flying Leads

123mm

110mm

Callpoint

Page 74

Conventional CP200 Callpoint

Product Codes 514.001.042.T CP200 without backbox - Thorn Security branded lid 514.001.042.Y CP200 without backbox - Tyco branded lid 514.001.057 CP200E without backbox, European Fire marking and glass, unbranded lid 514.001.006 CP200A complete with surface backbox. Arabic text. Thorn Security branded 514.001.042.A CP200 without backbox-ADT branded lid 90-110 Standard KAC KR-1 Flush Callpoint (No resistors fitted) 70-133 Standard KAC KR72-680 Flush Callpoint (680 Ohms resistance)

The CP200 is a red indoor callpoint with alert resistors and LED indicator. The CP200 is LPCB approved.

Conventional CP210 Callpoint

The CP210 is a red indoor callpoint with LED indicator and evacuate resistors. The CP210 is LPCB approved and is supplied without a backbox. Product Codes 514.001.043.A CP210 ADT branded 514.001.043.T CP210 Thorn Security branded 514.001.043.Y CP210 Tyco branded The CP211 is a red indoor callpoint with evacute resistors and LED indicator. (For use with the MXC/MXCE Panels only). 514.001.060.T CP211 Without backbox - Thorn Security Branded Lid 514.001.060.Y CP211 Without backbox - Tyco Branded Lid 514.001.060.A CP211 Without backbox - ADT Branded Lid

Conventional CP230 Callpoint

The CP230 is an IP66 red weatherproof callpoint with LED indicator and LPCB approved. Product Codes 514.001.010.A CP230 ADT branded 514.001.010.T CP230 Thorn branded 514.001.010.Y CP230 Tyco branded

Conventional CP270 Callpoint

Product Code 514.001.014 CP270 Yellow callpoint Evacuate complete with LED indicator without backbox - LPCB approved.

Other Conventional Callpoints & Keyswitches

Product Code 514.002.002.A White keyswitch in callpoint housing. English Bomb Alert marking with ADT branded lid

Page 75

CP920 MINERV A Addressable Callpoint

The CP920 is a red addressable callpoint with LED indicator. The CP920 is LPCB approved and supplied without backbox. Product Codes 514.001.049.A CP920 ADT branded 514.001.049.T CP920 Thorn Security branded 514.001.049.Y CP920 Tyco Branded

CP930 MINERV A Addressable Callpoint

The CP930 is a red addressable IP66 weatherproof callpoint with LED indicator. The CP930 is LPCB approved. Product Codes 514.001.050.A CP930 ADT branded 514.001.050.T CP930 Thorn Security branded 514.001.050.Y CP930 Tyco branded 514.001.512 Addressable potted module used in the CP530 and CP930 callpoints

CP937 MINERVA Addressable Callpoint

The CP937 is a red addressable IP55 outdoor callpoint with the same functionality as the CP930. The CP937 is based on the KAC Series 7000. Product Code 514.001.054.A CP937 Callpoint ADT branded

Special Marine Callpoints

Product Codes 514.001.012 CP260M Marine callpoint complete with LED indicator - IP66 514.001.013 CP250M Marine callpoint complete with LED indicator surface mount 514.001.046 CP520 Red addressable callpoint with LED indicator without backbox - Marine approved and Thorn Security branded lid 514.001.022 CP530 Red addressable IP66 weatherproof callpoint complete with LED indicator - Marine approved and Thorn Security branded lid

Callpoint Ancillaries
Product Code 90-106 Test keys for all CP200/500/900 callpoints except CP950Ex

90-107 Red M141 spacer for red CP200/900 KAC callpoints

515.001.028 Callpoint hinged cover for use on CP200 and CP900 models Page 76

515.001.026 Black callpoint bezel for CP200/500/900

STOPPER
The callpoint STOPPER provides protection from malicious or accidental activation of manual callpoints. Available for flush or surface mounted callpoints the STOPPER is also available with optional high pitch sounder which is activated when the lid is lifted. An optional Break-Seal fitting kit allows BreakSeals to be used to provide extra protection. WARNING:-Break seals only to be fitted by agreement with relevant fire authorities. The STOPPER is suitable for all callpoints up to 100mm square, including CP820, CP920, CP200 and other indoor KAC style callpoints.

Product Code 515.001.033 IPO36 Break Seal Kit With Sounder Weatherproof

Product Code 515.001.029 515.001.030 515.001.036 515.001.034 515.001.035 515.001.031 515.001.032

Ref STI6530 STI6531 STI6535 STI1230 STI3150 STI6532 STI6533

STOPPER Flush Surface 4 4 4

STOPPER II

4 4 4 4 4

STOPPER Dimensions

Millimetres A 137 B 140 C 104 D 45 E 12.5 F 12.5 G 185 H 12.5

Flush Fit Stopper Stopper with Sounder STI6530 STI6532

Surface Fit
(+30mm)

STI6531 STI6533

STOPPER II Dimensions

STOPPER STOPPER II Max. Callpoint Size 100 x 100mm 160 x 160 mm Max. Callpoint Depth 57.5 120 (+30mm Surface)

Stopper II Surface Fit - STI1230

Millimetres A B C D E F G H

70 16 197 50 178 146 228 254 Page 77

STOPPER II
STOPPER II is constructed as the STOPPER from tough injection moulded polycarbonate. Physically larger than the STOPPER the STOPPER II extends the number of products to which these tough multi-purpose covers can protect. It consists of a strong tamper-proof clear polycarbonate cover and frame that fits easily over such products as break glass callpoints. The STOPPER II can also be fitted with an integral battery powered sounder which activates if the cover is lifted. The STOPPER II is suitable for callpoints up to 160mm square like the DIN820/830 and CP830. Product Code 515.001.034 STI1230 Surface fit STOPPER II

Weather STOPPER & Weather STOPPER

II

STI6535

The Weather STOPPER and Weather STOPPERII extends the life of weather exposed devices, such as break glass callpoints, by offering protection against harsh conditions and environments. Experience has shown that this protective cover can extend the life of products installed in saline atmospheres, such as oil rigs and ship decks. While offering environmental protection the Weather STOPPER and Weather STOPPER IIare constructed from tough durable polycarbonate which will also guard against tampering, vandalism or accidental operation of devices such as emergency switches. Product Codes 515.001.036 STI6535 Surface fit Weather STOPPER 515.001.035 STI3150 Surface fit Weather STOPPERII

STI3150

Smoke Beam/CCTV Guard

The Smoke Beam/CCTV Guard is manufactured from tough coated steel rod and is designed to protect projected beam detectors or CCTV cameras from vandalism or accidental damage. Suitable for use with System Sensor, Hochiki and Fireray 2000 detectors. Technical Specification Dimensions: 260H x 200W x 321D mm

Product Code 516.015.009 STI9625 Smoke beam/CCTV guard

Extinguisher STOPPER
The Extinguisher STOPPER is a self powered electronic security device which can be installed and protecting fire extinguishers in minutes. The Extinguisher STOPPER is an effective way to stop vandalism, misuse or theft. This simple self contained device incorporates a unique and patented steel cable operated switch mechanism, which activates a piercing alarm when the extinguisher is removed from its normal position. One end of the operating cable is crimped and secured around the neck of the extinguisher and inserted into the alarm unit. If the operating cable is detached from the unit a 10dB sounder is activated. Product Codes 515.001.038 STI6200 Extinguisher STOPPER 515.001.039 CO23 Spare key for extinguisher stopper

Exit STOPPER
The Exit STOPPER is a completely self contained and self powered security device to protect and deter the unauthorised use of emergency exit doors. It is a versatile, reliable and extremely easy to install electronic door alarm. If the door is opened the Exit STOPPER activates a 110dB electronic sounder. A key operated over-ride facility is incorporated into the front of the unit, which will allow authorised use of the emergency door. The Exit STOPPER is injection moulded in flame retardant polycarbonate and can be easily Page 78 installed on wooden, glass or metal doors. There are also options for remote and double door installation. The unit comes complete with low battery warning, automatic reset facility, a choice of steady pulsating tones, a 9V long life alkaline battery and installation pack. Product Code 515.001.037 STI6400 Red Exit STOPPER

Keybox
This tough polycarbonate breakglass keybox is available to protect emergency keys and documents. Product Code 515.001.039 STI6720 Keybox with printed glass

Ancillaries - Back Boxes

Unless stated the CP200/500/900 indoor callpoints are supplied as flush mount units. The CP range are approved for use with the standard backbox. However, SR2-T and SR3-T backboxes are also available.

515.001.021 Standard Red surface mounting back box for CP200/500 & 900 indoor callpoints

10-115 SR2-T Optional Back Box (2 terminals)

95-131 SR3-T Optional Back Box (3 terminals)

Callpoint Spare Glasses - Current

Product Codes 515.001.014 CP200/500/900 Spare glasses, white Arabic text on clear background (Pack 5) 515.001.023 CP200/500/900 spare glasses for CP200N/CP500N, white dutch text on clear background (Pack 5) 515.001.027 Deformable operating unit glass with English text for use in place of glasses, for kitchens or other areas where glass is not acceptable 515.001.025 CP200/500/900 Glasses, clear English text on white background. No logo (Pack 5). Fitted as standard to English CP200/500 and 900 Callpoints 515.001.024 CP200/500/900 spare glasses, white Arabic/English text with Thorn Security logo on white background (Pack 5)

Callpoint Spare Glasses - Old

515.001.010 Walsall callpoint glasses (Pack 10) for service spares. The Walsall callpoint is an old square callpoint with round glass

515.001.003 ZF121 Callpoint glass (Pack 10) for service spares. The ZF121 is a square metal fronted AFA MINERVA callpoint typically used on Firefinder, System 1100, ZF/System 1200, CP and CT systems

515.001.009 CP100A glass unscored (Pack 10) for service spares. The CP100A has a large square glass to the edge of the callpoint. Used on the same AFA systems as the ZF121.

Page 79

Fulleon Range of Sounders

MXCE 2 Wire Symphoni Sounder
A Symphoni electronic sounder designed specifically for installation on the detection zone of the MXCE panel. Ingress Protection: IP42 Termination: 2.5mm2 Screw Terminals Product Codes 576.501.204 Symphoni 2 Wire Sounder (Red) 576.501.205 Symphoni 2 Wire Sounder (White)

Technical Specification Sound Output @ 1M: 100dB(A) +/-2dB(A) @ 24Vdc Tones: Continuous - 970Hz Alternating - 970/800 Hz at 2 Hz Pulsed - 970 Hz at 1Hz Operating Temperature: -25 to +70 C Construction: Red/White ABS

Fulleon 24Vdc Symphoni Sounder

The 24 Vdc Symphoni Sounder is a general purpose internal sounder, available either as a very high output sounder for noisy areas, or a high output low current sounder for applications where power is limited. Both versions share the same horn and backbox which has double cable entries for ease of installation. The low power version has 3 selectable tones which may be employed for one, two or three stage alarm applications. The high output version has 32 selectable tones and retains full tone compatibility with the Roshni, Squashni and Askari product ranges. Product Codes 576.501.200 SY/R Low Power Red Symphoni Sounder (3 tone) 576.501.201 SY/W Low Power White Symphoni Sounder (3 tone) 576.501.202 SYHO/R High Output Red Symphoni Sounder (32 tone) 576.501.203 SYHO/W High Output White Symphoni Sounder (32 tone)

Technical Specification
Model Operation Operating Voltage Range Sound Output @ 1m Volume Control Current Consumption Tones Symphoni High Output 2 Hours Continuous 9-28Vd.c. Up to 120dB(A) 240mA +/- 20mA on Tone 3 1 to 32 (see table under Flashni section) Symphoni (Low Power) Continuous 12-30Vd.c. 100dB(A) +/- 2dB(A) @24Vd. c. Down to 80dB approx. 5mA +/- 1mA at all volumes Alternating 990Hz/650Hz@2Hz Continuous 990Hz Intermittent 990Hz, On/Off@1Hz Synchronised Start +/- 0.5% -25C to +70C Polarised Input ABS Plastic Case IP42 0.212Kg

Synchronisation Frequency Stability Operating Temperature Line Monitoring Method Construction Ingress Protection Weight

Synchronised Start +/- 0.15% -25 C to +55C Polarised Input ABS Plastic Case IP42 0.58Kg

Page 80

Roshni
A flexible alarm sounder for Fire and Security applications complete with volume control and dil switch to provide 32 tones. Low profile Roshni with Deep base offers IP65 protection. All Roshni sounders have synchronised start for self synchronisation without third wire. Technical Specification Dimensions: 93 Dia x 105D mm (Deep base) Colour: Red or white available Approvals: None (Approved variants available) Output Voltage: 9-28Vd.c. Typical Current: 24Vd.c.@16mA Typ. Sound Output: @1m 102dB (A) Product Codes ROSHRDSR ROSHNI Sounder deep base - red 171.392 ROSHNI Sounder deep base - white

Squashni
The Squashni electronic sounder is the original ceiling sounder for use as a universal fire detector platform or as a stand alone sounder complete with blank cover. It comes complete with 28 preset tones and volume control and is fully compatible with Roshni tones, synchronised start. Technical Specification Dimensions: 112 Dia x 27D mm Colour: Matched to leading fire detector manufacturers Approvals: None (Approved variants available) Output Voltage: 9-28Vd.c. Typical Current: 24Vd.c.@16mA Typ. Sound Output: @1m 93dB (A) Product Codes 576.501.030 Squashni white 24Vd.c. 576.501.031 Blank cover plate white for Squashni

Askari Compact
The Askari Compact is a compact bedroom sounder for unobtrusive installation. It comes complete with 28 pre-set tones and volume control and is fully compatible with Roshni tones, synchronised start. Technical Specification Dimensions: 87.5H x 85.75W x 36D mm Colour: Red or white available Approvals: BS 5839 pt 1 Output Voltage: 9-28Vd.c. Typical Current: 24Vd.c.@16mA Typ. Sound Output: @1m 95dB (A) Product Codes 576.501.240 Askari sounder - red ASKW Askari sounder - white

CF Motorised Bells
The CF Motorised bells are low current, fully suppressed and polarised. Technical Specification Dimensions: 6 & 8 Diameter available Colour: Red (other colours available to order) Output Voltage: 18-30Vd.c. Typical Current: 24Vd.c.@22mA Typ. Sound Output: @1m 94dB (A) Product Codes 576.501.022.A 6" Bell 24Vd.c. motorised. 'Fire' Branding 576.501.022.T 6" Bell 24Vd.c. motorised. 'Fire' Branding 576.501.023.A 8" Bell 24Vd.c. motorised. 'Fire' Branding 576.501.023.T 8" Bell 24Vd.c. motorised. 'Fire' Branding text with ADT

text with Thorn

text with ADT

576.501.023A 3.A

576.501.022.A A

text with Thorn

Electronic Solenoid Bell

Unique patented alarm bell with miniature solenoid and integrated electronic control. No backbox required for surface wiring. Technical Specification Dimensions: 6 diameter Output Voltage: 18-30Vd.c. Typical Current: 24Vd.c.@30mA Typ. Sound Output: @1m 94dB (A) Product Codes 20-100 6 24Vd.c. Electronic bell, weatherproof - Wormald branded - white 20-101 6 24Vd.c. Electronic bell - Wormald branded - red

Page 81

Flashni
automatic sounder synchronisation. Weather resistant to IP65. Technical Specification Dimensions: 93 Dia x 92D mm (Shallow base) 93 Dia x 121D mm (Deep base) Output Voltage: 18-30Vd.c. Typical Current: 24Vd.c.@68mA Typ. Sound Output: @1m 101dB (A) Product Codes 20-118 Combined Roshni sounder/strobe complete with deep base 576.501.224 Combined Roshni Sounder/Strobe Red Body/Red Lens Low Profile complete with shallow base & tone switch. 576.501.225 Combined Roshni Sounder/Strobe White Body/Red Lens Low Profile complete with shallow base, & tone switch. 576.501.226 Combined Roshni Sounder/Strobe Red Body/Red Lens, Low Profile complete with shallow base, tone selection switch and separate sounder/strobe operation.

Combined sounder and beacon, combines the features of the Roshni electronic sounder with a fully integrated Xenon beacon. These sounders are fully compatible with all Roshni tones,

Fulleon Sounder T one Table

No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1st TONE ALT TONES 800/970 at 1/4 Hz SWEEPING 800/970Hz at 7Hz SWEEPING 800/970Hz at 1Hz CONTINUOUS at 2850Hz SWEEPING 2400-2850Hz at 7Hz SWEEPING 2400-2850Hz at 1Hz SLOW WHOOP SWEEP 1200-500 at 1Hz ALT TONES 2400/2850 2Hz INT TONE OF 970Hz at 1Hz ALT TONES 800/970 Hz at 1Hz INT TONE at 2850 Hz at 1Hz 970Hz at 1/4 SEC. ON 1 SEC. OFF CONTINUOUS AT 970Hz 554 FOR 100ms and 440Hz FOR 400ms INT 660Hz 150ms ON/150ms OFF INT 660Hz 1.8s ON/1.8s OFF INT 660Hz 6.5s ON/13s OFF CONTINUOUS 660Hz ALT 554/440Hz at 1Hz INT 660Hz 1Hz INT 2850Hz 150ms ON 100ms OFF SWEEP 800-970Hz at 50Hz SWEEP 2400-2850Z at 50 Hz INTERMITTENT 970Hz 500ms ON 500ms OFF INTERMITTENT 2850HZ 500ms ON 500ms OFF CONTINUOUS AT 4kHz ALTERNATING TONES 800/970 AT 2Hz ALTERNATING TONES 988/645 AT 2Hz ALTERNATING 510/610 at 1Hz SWEEPING 300-1200 at 1Hz CONTINUOUS AT 4kHz 2nd TONE 14 14 14 14 4 4 14 14 4 14 14 4 14 14 14 16 17 18 19 20 21 14 14 4 25 26 27 10 988Hz 510Hz 31 27 TYPICAL (mA/24V) 18 19 18 29 23 23 15 16 27 1 18 20 7 20 12 9 12 10 14 13 9 19 18 22 12 18 33 15 19 13 19 33 TYPICAL SOUND OUTPUT(dB @ 1m) 104 105 105 116 114 113 103 103 113 106 105 116 102 107 99 87 91 90 90 95 87 113 105 112 100 109 84 101 100 97 97 84

Fulleon Sounder T one Compatibility T able

Fulleon Tone Tone Number 2 Wire Symphoni 24V Symphoni Sounder Base 601SB/601SBD 602SB/602SBD 901SB
SWITCH 1 2 3 4 111X (880Hz) PULSED/INTERMITTENT TONE (970HZ@ 1HZ) 25 11 00111 011X (880Hz@1Hz)EURO ONLY ALTERNATING TONE (970HZ/800HZ@2HZ) DUTCH SLOW WHOOP (500Hz-1200Hz-3s on/0.5s off) SLOW SWEEP (800Hz/970Hz@1Hz) FAST SWEEP (800Hz/970HZ@7HZ) TWO TONE/ALTERNATING (800HZ/970HZ@1HZ) 7 3 2 11 N/A N/A N/A N/A 11001 11101 11110 10101 000X 010X 100X 110X (660Hz/880Hz@1Hz)EURO ONLY 1 (CLOSEST MATCH) 01 (990HZ/650HZ@2HZ) 11111 N/A

SWITCH A B CONTINUOUS TONE (970HZ) 14 10

SWITCH 1 2 3 4 5 10010

Page 82

DB3 Flameproof Horn Sounder

Cable Entries: 1 x 20mm EExd. Tone Selection: 27 user selectable tones. Certification: CENELEC EN50014,18,19 BASEEFA Cert.No. BAS00ATEX2097X, EExd IIC 100C (-55 t. amb + 55C)T5. Zones 1 and 2. UL Listed: Class 1 Div 2, Groups A-D Class 1 Zones 1 & 2, AExd IIC T4. Listing No. E203310. GOST Certification: 1Exd IIC T4 & 1Exde IIC T4 Cert. No. A-0759. Material: Body & horn in anti-static, UV stable, glass reinforced polyester. Swivel bracket & captive cover screws in stainless steel. Sound Output: 115dB(A) +/- 3dB(A)( tone dependent). Volume Control: Nominal Output (dBA) Input Current (mA)* 93 50 105 100 108 150 111 200 112 250 114 300 115 350 *Output measured with 24V input voltage. Tone set to 970Hz continuous. Weight: Ingress Protection: Voltage: Current Consumption: 6.0kg approx IP66 Up to 48Vd.c. 380mA at 24Vdc

Certified Temperature: EExd UL GOST Exd -20C -55C -20C to +55C to +55C to +50C

DB3

This lightweight all GRP flameproof sounder is intended for use in potentially explosive gas and dust atmospheres and has been designed with high ingress protection to cope with the harsh environmental conditions found offshore and onshore in the oil, gas and petrochemical industries. The flamepaths, flare and the body, are manufactured completely from a UV stable glass reinforced polyester. Stainless steel screws and sinter are incorporated thus ensuring a corrosion free product. A tapered flamepath is used to overcome the problems of assembly of parallel spigot flamepaths. Technical Specification Terminals: 6 x 2.5mm 2 Mounting: Stainless steel bracket with ratchet facility

Product Code 576.501.043 Flameproof Horn Sounder (DB3/D/048/N/1B/N/R)

Page 83

MINERV A Range of Sounders

A range of sounders to meet a wide variety of alarm applications where loud, penetrating and distinctive warnings must be given to alert people of fire situations. In addition, multitone electronic sounders can give a variety of sounds to signal other conditions e.g. extinguishing gas release imminent, etc. Features Wide range of both bells and electronic sounders High sound output characteristics Low current consumption Clean lines, modern styling Easy to install, low installation costs Weatherproof units for outdoor use Distinct sounds are available Motorised and Solenoid bells available Wide range of voltages available Addressable Loop Powered Banshee

Datasheet - Product Code PSF11 Audible Alarms

Sounder Type

Weight (Kg)
1.3 0.7 1.4 0.25 0.25 0.30 0.30 0.19 0.18 0.24 0.55 2.42

Enclosure to IP
IP20/44 IP22 IP22 IP45/66 IP45/66 IP45/66 IP66 IP44 IP43 IP54 IP54 IP54

Current Consumption @24V d.c.

50mA 15mA 30mA 15mA 25mA See note below 30mA 7mA 20mA 35mA 20mA 330mA

Sound Output db @ 1m
91 94 95 103 103 100 113 90 85 97 91 112

Frequency (Hz)
Ringing Ringing Ringing 800-950 2500-3000 800-950 2300-2900 800-950 800-970 800-1000 800-1000 800-1000

Output

150mm 6 Solenoid Bell 150mm 6 Motorised Bell 200mm 8 Motorised Bell Banshee LF Banshee HF Banshee Loop Powered* Bedlam FM Bedroom Sounder Squashni Sounder YODALARM YO3 YODALARM YO5 YODALARM YO8 A - Continuous B - Fast Sweep ie 9 times/sec C - Slow Sweep ie 3 times/sec D - Buzz ie 120 times/sec E - Interrupted

A A A ABCD ABCD B ABCD AB ABCD ABE ABE ABE

*LPBB521 The loop powered addressable sounder unit is a low frequency Banshee that can be both controlled and powered via the MINERVA analogue addressable fire controller. With this

facility, no separate sounder circuit needs to be installed, providing significant cable installation savings. The sounder output is set at a continuous fast sweep (9 time/sec) but may be pulsed (alert signal) under the control of the MINERVA fire controller.

Bells
6 Red Solenoid Operated Friedland Bell
The bells are the underdome type, with a high resonance pressed alloy-steel gong to ensure a loud clear-tone ring. The operating mechanism is fully enclosed and the gong is red stove enamelled for long life. The bells are designed for internal use, but gasket sealed conduit boxes can be provided for external use. Product Codes 576.500.004.A 240V Red bell 6 240Va.c. solenoid operated. Fire text with ADT branding 576.500.004.T 240V Red bell 6 240Va.c. solenoid operated. Fire text with Thorn branding 576.500.009.A 24V Bell 6 24V d.c. solenoid operated. Fire text with ADT branding 576.500.009.T 24V Bell 6 24V d.c. solenoid operated.Fire text with Thorn branding 577.001.002 Weatherproof gasket box 6 for use with Solenoid operated bells

6 & 8 Motorised Bells

Features CE marked Low current 6 bell (ONLY 15MA) Low cost Extra high 94dBA/m Slim profile (53mm) Fully suppressed and polarised Quick and easy to install Model MBF-6WE MBF-8WE Rated Voltage 24V d.c. 24V d.c. Rated Current 15mA 30mA Sound output 94dBA 95dBA Operating Temp -10 to +50C Colour Red Weight 720g 1420g Page 84 Product Codes 576.501.039.A MBF-6WE ADT Branded 576.501.039.T MBF-6WE Thorn Branded 576.501.040.A MBF-8WE ADT Branded Other branding available on request

Electronic Sounders
Banshee/Bedlam
An ultra low profile alarm sounder for fire and security applications utilising all of the best features of the traditional Banshee plus an additional volume control fitted as standard. The low profile unit has been designed to complement new building interiors and is available in red or white. Features Ultra Low Profile Banshee Volume Control Side and Rear cable entry Optional Deep base Loop in out terminals Sound Options: Buzz: Very fast sweep at approx 120Hz Fast Sweep: 800Hz-950Hz, sweeping 9 /Sec Slow sweep: 800Hz-950Hz, sweeping 3/Sec Continuous: 850Hz

Product Code Branded Colour Power Freq dB Alarm Current Weatherproof 576.501.004.A ADT Red 24V 800-950Hz 107 15mA No IP44 576.501.008.A ADT Red 24V 2.5-3KHz 105 25mA No IP44 576.501.033.A ADT White 24V 800-950Hz 107 15mA No IP44 576.501.024.A ADT Red 24V 800-950Hz 107 15mA Yes IP66 576.501.015.A ADT Red 24V 2.5-3KHz 117 30mA Yes IP66 576.501.004.T Thorn Red 24V 800-950Hz 107 15mA No IP44 576.501.008.T Thorn Red 24V 2.5-3KHz 105 25mA No IP44 576.501.033.T Thorn White 24V 800-950Hz 107 15mA No IP44 576.501.024.T Thorn Red 24V 800-950Hz 107 15mA Yes IP66 576.501.015.T Thorn Red 24V 2.5-3KHz 117 30mA Yes IP66 Sound levels are quoted on E-SPL Effective Sound Pressure Level @1 Metre which is the output in a typical room setting. 117dB models are known as Bedlam sounders

Weatherproof Banshee

Line Powered Banshee

The LPBB521 Line powered Addressable Sounder is designed to be driven from a Loop Powered MINERVA Analogue Addressable controller via the addressable loop. The sounder Product Code 577.001.026.A 577.001.029.A 577.001.026.T 577.001.029.T 577.001.026.Y 577.001.029.Y Branded Colour ADT Red ADT White Thorn Red Thorn White Tyco Red Tyco White Power Loop Loop Loop Loop Loop Loop is low frequency [800-950hz]. The Sounder output is set to Fast Sweep, but may be pulsed under the control of the MINERVA. Freq LF LF LF LF LF LF dB 96 96 96 96 96 96 Alarm Current Weatherproof 17mA No IP44 17mA No IP44 17mA No IP44 17mA No IP44 17mA No IP44 17mA No IP44

Accessories
Bedlam Banshee/Xenon Bracket The combined mounting bracket for the Besson Banshee and Xenon Beacon allows quick and neat installation of combined sounders and beacons. The bracket allows the following electronic sounders to be mounted with the range of 1W Xenon Beacons: Besson Banshee Besson Bedlam Loop powered MINERVA Besson Banshee MINERVA FIRECRYER voice enhanced sounder The bracket can be used with any of the 24Vd.c 1W Xenon beacons in red, clear, amber or blue (Part no.'s 540.001.030/031/032 & 033) Product Codes 576.501.041 Banshee/Xenon bracket 576.501.042 Banshee IP66 backbox for use with loop powered banshees and FIRECRYERS 577.001.006 Flush mounting bracket for use with low profile banshees - white 576.501.011 Banshee/Bedlam weatherproof mains adaptor pack 240Va.c. to 24Vd.c. use on any 24Vd.c. Banshee or Bedlam

Banshee Flush Mount Bracket

Besson Wafer Sounder

The standard Besson Wafer sounder is supplied in white with a blank cover included. The specification is as follows: Input voltage: 24V d.c. (+/-25%) Sound Output: 60dBA/90dBA at 1m typical (pot. Adjustable) offering the same sound formats as the Banshee sounder range. It can therefore be used in conjunction with the Banshee sounders on the same site. Technical Specification Current: 4mA to 15mA Temperature Range: -40C to + 70C Dimensions: Dia 103mm, Height 22mm (excluding coverplate) Product Code 576.501.038 Besson wafer sounder and blank cover in white

Besson Wafer Sounder

Flush Mount Bedroom Sounder

Meeting the requirements for BS5839 part 1, the Bedroom Sounder range is well suited to hotels and residential environments where aesthetics is a prime concern. Matching the sound output of the Banshee range of sounders so therefore they can be mixed on a site. Features Low current consumption 7mA Dual sound options selected via a jumper switch: Continuous and Fast Sweep 90dB Can be both Flush and Surface mounted Robust terminal connectors to accommodate up to 2.5mm 2 conductors Product Codes 576.501.032.A Flush Mount Sounder ADT Branded 576.501.032.T Flush Mount Sounder Thorn Branded

Flush Mount Sounder

Page 85

Banshee Slow Whoop

This sounder has the same features as the standard Banshee sounder but comes with a slow whoop sound as standard to meet the requirements of the Dutch Market. Product Code 576.501.019 24Vd.c. slow whoop low profile red sounder (Dutch)

Banshee IS28
Product Code 576.501.013 IS28VCL Banshee IS28 BS5839 low frequency BASEEFA certified intrinsically safe Grey sounder - 98dBA, 10mA. Certificate number. Ex87B2027 EExia IIC T5

Klaxon Secomak Siren

Product Code 576.502.010 MINIMITE Klaxon Secomak 24Vd.c. sounder siren - range 370 yards

Yodalarms
This versatile range of sounders are ideally suited for fire, safety and security hazard warning. Technical Specification Dimensions: YO3: 89H x 89W x 85D mm YO5: 134H x 134W x 128D mm YO8: 216H x 216W x 153D mm Product Codes 576.501.001 YO3 Yodalarm 3 24Vd.c. 100dB @ 1Mtr 576.501.002 YO5 Yodalarm 5 24Vd.c. 106dB @ 1Mtr 576.501.003 YO8 Yodalarm 8 24Vd.c. 112dB @ 1Mtr

Sounder Circuit EOL

The sounder circuit EOL units or EOL resistors are supplied with the relevant control panels and sounder modules. Spare sounder circuit EOL modules for System 1600, 1700, MINERVA 1-4, T880 Modules and sounder circuits on the MINERVA main processor are available as follows. Product Code 509.013.031 Spare sounder circuit EOL unit

Page 86

MINERVA Firecryer - Voice Enhanced Sounders Firecryer

Synchronised and Unsynchronised Variants Unsynchronised versions provide fast retrofit and are acceptable if only one FIRECRYER is used per area to enhance the electronic sounders. Synchronised variants only require a synchro board adding at the fire panel and then allow all FIRECRYERs on two sounder circuits to be synchronised. Low Power The FIRECRYER takes marginally more power than an equivalent electronic sounder. This enables voice enhanced sounders to be offered without the high additional cost of large battery backups. Standard Products The FIRECRYER is available in 3 models (unsynchronised, synchronised and 4 message synchronised) in ADT branding with predefined English messages and 100dBA fast sweep alert sound to comply with BS5839Pt1. Other variants with different branding, different language messages and different tones are available upon request. Technical Specification Dimensions : IP45 - 92dia 61.3 Hmm IP66 - 92dia 85.5 Hmm Operating Voltage: Nominally 24Vd.c. Min. 18Vd.c. Max. 30Vd.c. Current Consumption: Average 19mA Min. 10mA Max.23mA (Subject to message) (at max. output) Sound output: Fast sweep - 100dBA Voice message: 97dBA approx Volume Control Via variable resistor with 20dB range from maximum Polarity D.C. reverse polarity protection Operating Temp: -5C to +55C Humidity: 90% relative humidity (noncondensing) Weatherproofing: Standard base IP45 Special base IP66 Housing Material: Red Flame-retardant ABS Standard Messages AK - Fire Emergency, Please remain calm and evacuate the building immediately AB - This is a fire alert. This is a fire alert. Await further instructions. Await further instructions. SP - This is an ADT fire alarm test. No action required AE - Fire Alarm Test Now Complete Sync Board PCB Dimensions EMC/RFI Operating Temp Operating Voltage Quiescent Current Message Mode Sounder Circuit NA NA MFC 1SB MFC4SB

75.5 x 100mm 138 x 100mm CE Marked -5 to +55C 18-30V d.c. 6mA (Max) 28mA 2 x 500mA Fused

The MINERVA FIRECRYER is an electronic sounder, which provides as default the same electronic sound as the MINERVA Besson Banshees. In addition, the FIRECRYER provides up to 4 predefined voice messages, which can be synchronised across a zone of sounders. The FIRECRYER offers an excellent service upgrade opportunity in the UK for systems installed to BS5839pt1 and may also provide opportunities elsewhere. Key Features Single and Four Message Variants A single message can confirm that the electronic sound is a fire alarm warning and differentiate it from other electronic sounders used in an environment. With four messages fire tests can be easily differentiated from alert and evacuate messages. Two Wire Connection The FIRECRYER uses a standard 2 wire 24V d.c. connection to carry power, message switching and message synchronisation. This enables a quick and easy upgrade to existing bells and sounders MINERVA Banshee Compatible The electronic alarm sound and mechanics of the FIRECRYER are the same as other Banshee sounders in the range. This allows them to be mixed with other sounders in a zone. It also means that existing Banshees can be very quickly upgraded to FIRECRYERs.

Product Codes 576.501.037 MFC4DEMO Firecryer 4 message demo box 576.501.100 MFC1SB Firecryer single message synch board for use with single message synchronised MINERVA Firecryers 576.501.101 MFC4SB Firecryer 4 message synch board for use with 4 message MINERVA Firecryers 576.501.103 MFC4ENC 4 message synch board enclosure with 3 position keyswitch for use with 576.501.101 576.501.042 Banshee IP66 backbox for Loop powered Banshee and Firecryers

Product Codes

Product Message Brand Synchronised Reference 1 2 3 4 576.501.034.A MFC1SEA AK ADT Yes 576.501.035.A MFC4SUA AK AB SP AE ADT Yes 576.501.036.A MFC1EA AK ADT No 576.501.104.A *MFC4SCA Customer Defined ADT Yes * For recording of special messages there is a charge. This can be ordered under product code 576.501.105 MFC-CM. This includes the supply of a different timer chip for MFC4SB synchronisation board.

Page 87

Visual Indicators Single Gang Lamp/Buzzer Units

Lamp Buzzer units may be used for local alarms when high level audible warnings may not be appropriate. Available in flush and surface mount versions to fit standard single backboxes Dimensions: 90H x 90W x 40D mm Product Codes 540.001.012 Lamp (red)/buzzer unit flush mounting MK2 including single gang backbox. Labelled Fire 540.001.013 Lamp (red)/buzzer unit surface mounting MK2. Labelled Fire

Xenon Beacons - 24V Including Surface Mount Adaptor

The mounting base is available to mount both the beacon and a sounder. Features Available in 1, 2, 3 and 5 watts Protected to I.P. 65 Attractive low profile design Optional bracket for mounting both Beacon and Banshee Sounder Product Codes 540.001.030 Low profile clear 24Vd.c. 1 watt
.

This high quality range of Xenon beacons are tested to IP 65 making them ideal for the most stringent applications. Each beacon incorporates a low profile Frestral lens designed to give maximum light output. Technical Specification Voltage V d.c. 24 24 24 24 Power Output Alarm Current Watt(s) mA 1 42 2 84 3 126 5 210

540.001.031 Low profile blue 24Vd.c. 1 watt 540.001.032 Low profile amber 24Vd.c. 1 watt 540.001.033 Low profile red 24Vd.c. 1 watt 20-112 Low profile 2 watt Red 20-113 Low profile 5 watt Red 20-120 Low profile 3 watt Red

Flash Rate 60/min 60/min 60/min 60/min

Rating IP65 IP65 IP65 IP65

Temp. Range -30 to +70C -30 to +70C -30 to +70C -30 to +70C

Dimensions (mm) Height Diameter 51 75 51 75 51 75 75 90

XB11 Flameproof Xenon Beacon

The beacon housing is manufactured completely from a U.V. stable, glass reinforced polyester. Stainless steel screws and mounting bracket are incorporated ensuring a totally corrosion free product. Product Code 540.001.039 Flameproof Xenon Beacon (XB11B02406RNBNNNR) These certified beacons have been designed for use in potentially explosive gas and dust atmospheres and harsh environmental conditions. The glass reinforced polyester enclosures are suitable for use offshore or onshore, where light weight combined with corrosion resistance is required. Technical Specification Certification: BASEEFA EExd IIB 100 C (-55 t. amb +55C)T5. 85 C (-55 t.amb + 40C)T6. Cert. No. 99 ATEX 2195X. CENELEC EN50014 and EN50018 Material: Body: - Glass reinforced polyester Lens: - Glass. Cover Screws + Backstrap: - Stainless steel 316. Red Voltage Tube Energy (Joules) Peak Current Consumption (mA) Effective Intensity (Cd) Peak Intensity (Cd) Power Consumption (Watts) 24Vd.c. 5 320 29 22213 8

Note: The Cd figures are for a clear lens @ 1Hz flash rate. For red lens multiple by 0.15

Weight: Certified Temperature: Ingress Protection: Terminals: Entries:

2.5Kg EExd -55C to + 55C (T5) -55C to + 40C (T6) IP66 6 x 2.5mm 2 2 x 20mm ISO EExd.

Finish:

Page 88

XB8 Intrinsically Safe Beacon

This ruggedised, intrinsically safe and weatherproof beacon is intended for use in potentially explosive atmospheres, and has been designed with high ingress protection to cope with the harsh environmental conditions found offshore and onshore in the oil, gas and petrochemical industries Product Code 540.001.038 Intrinsically Safe Xenon Beacon (XB8BB024CNR) Technical Specification Certification: CENELEC EN50014, 20 & 39 BASEEFA certificate No. EX 96D2446 (apparatus) BASEEFA certificate No. EX96D2447 (system) EExia IIB T4 Zones 0,1 & 2 GOST Certification: 0Exia IIBT4, Cert. No. A-0757 UV stable glass reinforced polyester body. Clear polycarbonate cover/lens. Retained stainless steel cover screws.

Material:

Finish: Self coloured red Tube Type: Xenon discharge Lens Colour: Clear Terminals: 8 x2.5mm2 Flash Rate: 1 flash per second Cable Entries: Up to 3 x M20 via knockouts. Tube Energy: 0.5 Joules Weight: 1.4kg Certified Temperature: -55C TO + 60C Ingress Protection: IP66 Tube Life: >1 x 10 6Flashes Voltage: 24V via suitable barrier Current Consumption: 71mA max nominal

Voice Alarm Modules

VM520 Voice Module
Features Fully monitored system when used in conjunction with MINERVA Analogue Addressable Fire Controller, with all speaker cabling faults detected, enabling use of this unit on projects with full BS5839 requirements Customised messages available Messages can be triggered via MINERVA address loop or via closing contact inputs Output capacity for up to four loudspeakers Clear test message can be transmitted for the weekly system check, instead of evacuate. This will prevent any misunderstandings at test time. Manual - Vol08A-02-D14 Ancillaries Manual Technical Specification Operating temperature: -20oC to +70 oC Relative Humidity: up to 95% noncondensing Addressable circuit input:125mA from loop Direct Message trigger: Volt free closing contacts (1 per message) Power Supply: 20 to 32 Vd.c. Quiescent Current: 15 mA Alarm Current: 120mA per speaker Product Codes 577.001.101 VM520 Housing 577.001.107 VM520 Peprom (IC6) 577.001.102 VM520 PCB (requires housing)

The VM520 is a simple voice evacuation module which memorises and amplifies three voice messages programmed during manufacturing. The VM520 is designed to provide voice evacuation in small buildings or small public areas in large buildings.

Flush Mounting Loudspeaker

A loudspeaker tested for compatibility with the VM520. Product Code 577.001.106 Flush mounting loudspeaker 8 ohms

Manual - Vol08A-02-D14 Ancillaries Manual

Page 89

Auxiliary Interface Relays Boxed Relays

567.001.004 Relay 5000 One or two plug in relays on PCB. Order relay (569.001.007) separately. 567.005.005 Relay 5016. Supplied with 1 PCB but can fit a maximum of 2 PCBs each containing up to 8 DIL relays. (Rated at 1 amp @ 30Vdc resistive)

567.005.004 Relay 5010. Supplied with 1 PCB but can fit a maximum of 2 PCBs each containing up to 5 plug in relays. Order relay (569.001.007 ) separately. 568.001.006 Relay 5016 PCB (8 Relays) - Rated at 1 amp @ 30Vdc resistive.

567.007.008 Alarm Relay 240Va.c. MK4 567.007.009 Alarm Relay 24Vd.c. MK4

Spare Relay Housings

568.001.007 Relay 5000 Housing auxiliary relay (small)

568.001.008 Relay 5010 Housing auxiliary relay (large)

Cradle Relay and Retaining Clip

Product Code 569.001.007 Cradle relay and retaining clip 2 C/O 26V nominal 700K ohm coil 5 amp (used with Relay 5000 and 5010).

Miscellaneous Fire Products and Spares Sprinkler Delay Module

Product Code 584.002.001 Sprinkler delay module. Provides preset delay between sprinkler pressure switch and conventional fire detection panel.

Zonal Sounder Circuit Monitoring PCB

The Zonal Sounder Circuit Monitoring PCB provides relay inputs (5 off) to interface to 5 separate, and monitored sounder circuits. Each has a maximum of 2 Amps. Product Code 541.001.018 Zonal sounder circuit monitoring PCB

Fire Notice Frames

These frames are used mainly for Fire Alarm Zone Charts and are available to fit A4 to A1 size drawings. These come supplied with fitting hooks. Product Codes 525.001.005 A4 Dimensions: 525.001.006 A3 Dimensions: 525.001.007 A1 Dimensions: 525.001.008 A2 Dimensions: 212mm x 297mm 280mm x 356mm 483mm x 783mm 483mm x 367mm

Page 90

Fire Resistant Cable

DTWYLER Lifeline cable is suitable for fire alarms and emergency lighting where BS6387 and BS7629 standards are acceptable and meets the installation and performance requirements of: BS5839 Pt.1 for use in fire alarms BS5266 for use with emergency lighting BS4066 Tests on electrical cable under fire conditions IEC331 fire resistance Lifeline is LPCB approved to BS6387 CAT CWZ and BASEC approved to BS7629. Lifeline is low smoke, zero halogen, has an integral aluminium backed mylar tape screen with Product Codes 599.048.020 599.048.022 599.048.023 599.048.024 599.048.032 599.048.034 599.048.035 tinned drain wire and requires no special terminations, tools or ferrules for installation. Full details of Lifeline cable can be found in the DTWYLER Lifeline datasheets on the Tyco Safety Products website (www.tycosafetyproducts europe.com). DTWYLER offer a wide range of cable and safety cabling systems including complete safety cable systems to DIN4102 part 12. All DTWYLER products are available at preferential prices to Tyco companies via Tyco Safety Products. For more information contact Rob Sutcliffe (rsutcliffe@tycoint.com). The following DTWYLER Lifeline cables are held in stock at Tyco Safety Products, Letchworth warehouse, together with suitable P clips and glands. Cables are priced per metre but must be ordered in units of 100 metre. P clips and glands are priced each but must be ordered in packs.

Description - DTWYLER Lifeline cable No. Cores Core Size Colour 2 + earth 1 mm Red 2 + earth 2 + earth 2 + earth 4 + earth 4 + earth 4 + earth 1.5 mm 1.5 mm 2.5 mm 1 mm 1.5 mm 1.5 mm Red White Red Red Red White

Technical Specification Clips P34 R P34 R P34 W P37 R P37 R P40 R P40 W Construction Conductor: Insulation: Bare copper, solid or stranded to BS 6360 Special double layer insulation according to BS 7655, E15 Inner Covering: Screening: High temperature resistant glass fibre tape Al-Laminated tape with tinned copper drain wire, solid to BS 6360 Flame retardant polyolefin compound according to BS 7655, LTS3 Technical Properties Rated Voltage: Test Voltage: Operating Temp: Core Colours: 2 cores + earth: red, black 4 cores + earth:red,yellow,blue,black Sheath Colour: General Properties Approvals BASEC Zero Halogen, no corrosive gases IEC 60754-2, BS 6425 part 1 Reduced fire propagation - IEC 603323, BS 4066 part 3 Minimum smoke emission - IEC 61034, BS 7622 Insulation integrity - IEC 60331 (FE180), BS 6387 (cat. CWZ) Red or white 300/500V 2000V, 50Hz core/core 2000V, 50Hz core/screen -15oC to +90 oC

Outer Sheath: Product Codes 599.048.001 599.048.002 599.048.003 599.048.005 599.048.006 599.048.007 599.048.009 599.048.010 Description - DTWYLER Lifeline Fire Resistant P Clips & Glands Qty. per pack Reference Colour 50 P34 Red 50 P34 White 50 P37 Red 50 P40 Red 50 P40 White 50 P43 Red 10 NG1 Red 10 NG1 White

No. of Cores x Cross Section (n x mm 2 x 1.0 2 x 1.5 2 x 2.5 4 x 1.0 4 x 1.5

) Copper Content (Kg/Km) 19 29 48 39 58

Total Weight (Kg/Km) 75 97 141 114 149

Outer Diameter (approx. mm) 7.4 8.2 9.6 8.6 9.6

Calorific Potential (KWh/m) 0.16 0.18 0.24 0.23 0.27

Page 91

Water Leak Detection Alarms

Introduction The Water Leak detection system is a water detection alarm designed to be used in situations where not just flooding but also undue dampness could cause damage or ultimately become dangerous. The system comprises an electronic monitoring and alarm control panel connected to sensors located in the area requiring protection and can be custom made with a variety of types of detection sensor to suit the characteristics of the areas to be covered. This system has been designed for ease of installation and modern micro-electronics ensure a high degree of reliability. Typical Applications Computer Rooms, Telecommunications and Office Areas Electrical Plant and Tank Areas Valuables, Antiques and Artifacts In general, wherever the presence of water could be a potential problem to people, equipment, perishable stock, data/information archives and record stores, hospital theatres and so on. There are also sensors for the detection of nonconductive fluids such as diesel/oil.

DETEK Water Flood Detection Controllers

All systems have a test facility to enable simple regular confidence checking of the equipment. Lockable cabinets constructed in mild steel with stove enamelled finish for surface mounting. 20mm Knockouts are provided for ease of cable entry. Indications of status on each zone, wiring fault and supply healthy. Mains fail battery back-up indication where applicable. The 85dBA pulsed audible alarm has a fully functional local mute facility. Quality Electro Magnetic Compatibility - All of the control panels and sensors have been performance tested to meet the requirements of EN55022 for emissions and EN50092 for immunity Controller electronics are housed in a robust cabinet and provide accurate sensing for water leakage and comprehensive alarm facilities. The system is ideal for all types of applications utilising a mixture of sensors on a single control panel to give optimum flexibility. British International Standards equipment is manufactured in accordance with EN ISO 9001 procedures - The (Safety) Regulations 1994 - Low Voltage Directive (SI 1994/3260). Technical Specification Dimensions: 160H x 220W x 62D mm (Single Zone) 270H x 362W x 84D mm (Multi Zone) Supply: Single phase 240Va.c., 25VA Max. Relay Contacts: Two sets of volt free change over contacts for alarm and one set for wiring fault or power loss. These may be used to link into Building Management Systems or for remote alarms and beacons up to 2A, 50Va.c./d.c. Product Codes 508.200.004 1 Zone - water/flood control panel 508.200.005 2 Zone - water/flood control panel 508.200.006 4 Zone - water/flood control panel

Electrical Safety - Manufactured in accordance with Electrical Equipment

Compatible Sensors
Sensor Cable, Sensor Pads & Probe Sensors
Sensor Pads Product Codes Sensor Cable 516.200.010 CD/5 5 metre length of sensing cable 516.200.011 CD/10 10 metre length of sensing cable 516.200.012 SOL Start of line for sensing cable 516.200.013 EOL End of line for sensing cable 516.200.014 FF1 Sensing cable fixing clips 516.200.015 CDT Sensing cable identification tags Sensor Pads 516.200.016 SFU Sensor pad face up 516.200.006 SFD Sensor pad face down 516.200.007 SFD/C Cover for sensor pad face down Probe Sensors 516.200.004 SPS/V Vertical mounting probe sensor complete with cover

Probe Sensor Sensor Cable

Sensor Cable Sensor cable comprises high flexibility conductors insulated by Helagaine mono-filament braiding. Cable or tape sensors are suitable for general protection under false floors, or can be fastened directly to pipework enabling coverage in ceiling void areas. The cables can be connected together, up to 100m, to cater for larger areas. For each zone a start of line and an end of line module is required. Technical Specification Dimensions: 8mm dia

Sensor Pads Sensor pads are constructed from glass fibre with an anti-corrosive nickel plated surface. Pads will detect a few ccs of liquid and are either face up for location under vulnerable points or face down for a general coverage. Technical Specification Dimensions: 115H x 160W mm Probe Sensors Probe sensors are the least sensitive and are often employed as water level sensors. In general the sensor is enclosed in a protective cover which also provides a means for fixing and 20mm gland entry. The probe is designed for vertical mounting at skirting level though may be mounted in voids or sumps. A screw allows 16mm height adjustment after the sensor is installed. Technical Specification Dimensions: 85H x 62W x 62D mm

Page 92

Wire Free Product Range

Introduction Wire free fire system technology is fast becoming a recognised and accepted alternative to wired fire alarm systems. Tyco Safety Products Radio Fire Alarm System provides a level of performance and reliability comparable to hard-wired systems. It also has the added advantage of being totally flexible, quick and easy to install with virtually no damage or disruption. This enables the installation of a fire alarm system to be carried out in an occupied building where cabling is unacceptable, unwelcome, disruptive or impracticable. The cost of making good and redecorating is significantly reduced with wire free systems. Radio Systems are highly cost effective and can easily be modified or extended to combine with existing hard wired systems. A system can be tailored for use in any existing building to meet highly individual needs for many commercial and industrial applications. Regarding fire detection, the radio system can be considered to be identical to a hard-wired system, with the fire survey carried out to the same standards. The Radio Survey It is important that a radio survey is carried out by trained personnel on all sites, before a complete system quotation can be made. Features Detectors fire tested to prEN54 part 7 Designed to meet BS5839 Part 4 Minimum Installation damage and disruption Flexible system design up to 96 zones System easily modified or extended 80 character LCD pinpoints each alarm with plain text location messages Full zonal LED display and detailed fault annunciation. Suitable for permanent or temporary applications. 1000 Event memory Up to 27 repeater panels Long battery life Typical Applications Heritage and Listed Buildings Art Galleries and Museums Schools and Colleges Hospitals, Clinics and Nursing Homes Temporary Systems for Refurbishments Airports and Military Bases Government and Council Buildings Exhibition Complexes and Stadia. Note: The system elements and associated product codes described in the Wire Free section relate to the UK frequency variants as approved by the Home Office for use in low powered systems in the UK. 173 MHz (field devices) and 459 MHz (battery powered sounders). These frequencies may be suitable for applications in other countries. Please contact Tyco Safety Products for further information.

Controllers
(at 500mW) for command signals to radio sounders and personal pagers. Technical Specification Dimensions: 330 x 450 x 116mm Power Requirements: 220/240V, 50Hz Product Codes Networked Versions 517.131.011 96 zone analogue addressable radio LAN controller, VHF receiver , UHF transmitter, 252 device capacity c/w keypad and VFD display. 2 hardwire sounder circuits. RS232 and RS458 ports. BS5839 and EN54 Standard. C/W 2 Helical Antennas and Thermal Printer. 517.131.012 24 zone analogue addressable radio LAN controller with printer option, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and LCD display with option for VFD display. 2 hardwire sounder circuits. RS232 and RS 485 ports. c/w 2 helical antennas. 517.131.013 24 zone analogue addressable radio LAN controller, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and LCD display with option for VFD display. 2 hardwire sounder circuits. RS232 and RS485 ports. Comes with 2 x helical antennas and thermal printer. 517.131.014 12 zone LAN analogue addressable controller with printer option, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and LCD display. 2 hardwire sounder circuits. RS232 and RS485 ports. c/w 2 helical antennas. 517.131.015 12 zone radio LAN analogue addressable controller with panel mounted event printer, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and LCD display. 2 hardwire sounder circuits.RS232 and RS485 ports. Comes with 2 x helical antennas and thermal printer. 517.131.016 4 zone radio LAN addressable controller, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and LCD display. 2 hardwire sounder circuits. RS232 and RS485 ports. Supplied c/w 2 helical antennas. Stand Alone Versions 517.131.001 24 zone analogue addressable controller, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and VDF display. 2 hardwire sounder circuits. RS232 and RS485 ports. BS5839 and EN 54 Standard. Supplied c/w 2 helical antennas (Not inc. Batteries). 517.131.002 12 zone analogue addressable controller, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and VFD display. 2 hardwire sounder circuits. RS232 and RS 485 ports. BS5839 and EN54 Standard. Supplied c/w 2 helical antennas (Not inc. Batteries). 517.131.017 96 zone analogue addressable controller with panel mounted printer, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and VFD display. 2 hardwire sounder circuits. RS232 and RS485 ports. c/w 2 helical antennas. 517.131.018 24 zone analogue addressable controller with panel mounted printer, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and LCD display with option for VFD display. 2 hardwire sounder circuits. RS232 and RS485 ports. Supplied c/w 2 helical antennas. 517.131.019 4 Zone Addressable Control Panel VHF receiver, UHF transmitter, 252 device capacity c/w keypad and LCD display. 2 hardwire sounder circuits. RS232 and RS485 ports. BS5839 and EN 54 Standard. Supplied c/w 2 helical antennas (batteries are not supplied).

The System 5000 FIRE POINT is designed using EMS radio technology allowing flexibility and expansion of wire-free fire detection systems. The controllers features have been targeted, but are not exclusive to, a 4-zone panel system but with the added benefits given by wire-free installation. The fire alarm control panel incorporates state of the art radio technology coupled with the features required providing the user with a cost effective and practical fire alarm panel. The System 5000 FIREPOINT uses approved industry standard devices such as callpoints, sounders and Ziton detectors etc. The addressable detector is alkaline battery powered with a 5 year typical life cycle including call points and sounders. The panel technology is designed to meet the requirements of the BS5839 and EN54 standards and has been fully tested by the DTI to satisfy the requirements of MPT 1305 and 1328 radio standards. VHF technology for receiving information from devices is combined with UHF

Page 93

Field Devices
Radio transmitters are incorporated into each field device to communicate with the controllers. The units are programmed with a device number, zone number, system code, RX number and TX number. These identities are sent back to the controller in the event of a fire, battery low condition or tamper, to precisely identify the location of the event on the controller display. Power to the radio transmitter is supplied by a two stage Lithium battery pack . The battery pack provides up to five years service under normal operating conditions. When primary power begins to deteriorate, a signal is sent to the controller and a low battery fault is indicated. After a battery low signal has been reported, devices will continue to operate for a further 30 days.

Optical Smoke Detectors

seconds. Initial detection of smoke traces accelerates polling to every 2 seconds The alarm is verified twice to ensure freedom from false alarms. The detector incorporates a selectable automatic lock, which if enabled, locks it into its base when plugged in, preventing unauthorised removal. Each unit has a unique address configured during manufacture and is individually addressable by the system controller. The radio address module is programmed to report at regular intervals of 5-9 minutes. Designed and manufactured using the latest techniques and surface mount technology ensures component count is kept to a minimum, thereby maximising reliability. The address/transmitter module is powered by a low-voltage dual supply alkaline battery pack. The battery pack condition is continually monitored. The battery pack has been tested to provide a typical 5 years life cycle for normal site operations. The system indicates remaining battery capacity and a low battery condition is indicated to the controller as a fault allowing 30 days for the battery pack to be changed before unit failure. Technical Specification Dimensions: 110 x 75mm Product Codes Addressable 517.131.005 Addressable Optical Smoke Detector with 4 sensitivity settings c/w transmitter, processor, radio address module, battery board, ceiling mount. Analogue Addressable 517.131.009 Analogue Addressable Optical Smoke Detector with 4 sensitivity settings, c/w transmitter, processor, radio address module, battery board, ceiling mount.

The Analogue Addressable Optical Smoke Detector is bayonet-fitted to a radio address/ transmitter module incorporating alkaline batteries and supplied with a surface mount base unit. Removal of the detector or address/ transmitter module will indicate a fault condition. The detector is manufactured by Ziton and is designed to comply with BS5839 Part 5 and EN54 Part 7. The Optical Smoke Detector operates on an advanced light scattering principle, using a wide angle, light beam together with an extra high sensitivity photodiode receiver. An internal polling system checks for smoke particles every 5

Heat Detectors
detector carries out a self test that checks and verifies every function, including the thermistor, and sensitivity to temperature. Any failure is automatically reported to the control panel. The detector incorporates a selectable automatic lock, which if enabled locks it into its base when plugged in, preventing unauthorised removal. Each unit has a unique address configured during manufacture and is individually addressable by the system controller. The radio address module is programmed to report at regular intervals of 5 - 9 minutes. Designed and manufactured using the latest techniques and surface mount technology ensures component count is kept to a minimum, thereby maximising reliability. The address/transmitter module is powered by a low-voltage dual supply alkaline battery pack. The battery pack condition is continually monitored. The battery pack has been tested to provide a typical 5 years life cycle for normal site operations. The system indicates remaining battery capacity and a low battery condition is indicated to the controller as a fault allowing 30 days for the battery pack to be changed before unit failure. Technical Specification Dimensions: 110 x 75mm Product Codes Addressable 517.131.006 Addressable Heat Detector with 4 sensitivity settings c/w transmitter, processor, radio address module, battery board, ceiling mount. Analogue Addressable 517.131.029 Heat Detector with 4 sensitivity settings c/w transmitter, processor, radio address module, battery board, ceiling mount.

The Analogue Addressable Heat Detector is bayonet-fitted to a radio address/transmitter module incorporating alkaline batteries and supplied with a surface mount base unit. Removal of the detector or address/transmitter module will indicate a fault condition. The detector is manufactured by Ziton and is designed to comply with BS5839 Part 5 and EN54 Part 5 (grade 1 and 2) and part 8 (range 1). The Heat Detector operates on a highly sensitive thermistor, which measure the actual temperature and rate of rise change. At regular intervals, the

Page 94

Callpoints
insertion of a test key. When the glass is broken, the micro-switch is released, triggering an alarm transmission, by radio, to the alarm panel. Each unit has a unique address configured during manufacture and is individually addressable by the system controller during commissioning. The unit is programmed to report at regular intervals of 5-9 minutes. Designed and manufactured using the latest techniques and surface mount technology ensures component count is kept to a minimum, thereby maximising reliability. The Radio Callpoint is battery operated, incorporating a radio addressable transmitter thereby eliminating the need for wiring back to the fire alarm control panel. The callpoint is designed to meet BS5839 part 2. The callpoint is fitted into an industry-standard ABS moulding which allows for testing by The Callpoint is powered by a low-voltage dual supply Alkaline battery pack. The battery pack condition is continually monitored. The battery pack has been tested to provide a typical 5 years life cycle for normal site operations. The system indicates remaining battery capacity and a low battery condition is indicated to the controller as a fault allowing 30 days for the battery pack to be changed before unit failure. Technical Specification Dimensions: 87 x 87 x 61.5mm Product Codes Radio 517.131.004 Radio manual call point c/w transmitter, processor, radio address module, battery board (supplied with glass substitute card) - Red 517.131.039 Radio manual call point c/w transmitter, processor, radio address module, battery board (supplied with glass substitute card) - Yellow 517.131.040 Weatherproof red call point c/w transmitter, processor, battery board and glass substitute card Hardwired 517.131.041 Hard-wired call point (For use with Sounder 5320/R) 517.131.042 Hard-wired call point (For use with all versions of controller)

Radio Sensor Sounder

5 year battery life and is remotely activated and monitored by the System 5000 controller. Each unit has a unique address configured during manufacture and is individually addressable by the system controller. The address module base is compatible with the range of System 5000 heads; these include optical, heat and combined sensor heads. The sounder element is designed as Omnidirectional with an Output of 90 dBA at 1 metre, making it ideal for hotels, boarding schools and nursing homes where a detector and sounder would be required in each room. The internal polling of the sensor is every 5 seconds, which accelerates to every 2 seconds when traces of smoke or heat are detected. The alarm is then verified twice to ensure freedom from false alarms. Technical Specification Dimensions: 88 x 88 x 80.6mm Product Codes 517.131.030 Combined Multi-Sensor (Analogue Addressable Optical Smoke & Heat). 517.131.031 Combined Sounder/Analogue Optical Smoke Detector c/w VHF transmitter, UHF receiver, with 4 sensitivity settings and 90 dbA electronic sounder including 3 x C alkaline batteries and 3 x AA alkaline batteries. 517.131.032 Combined Sounder/Heat Detector c/w VHF transmitter, UHF receiver with 4 sensitivity settings and 90dbA electronic sounder including 3 x C alkaline batteries and 3 x AA alkaline batteries.

Designed and manufactured using the latest techniques including surface mount technology, the combined detector/sounder offers easy and quick installation with the added benefit of a lower quantity of physical devices required for a system. The sounder part of the unit consists of its own integral Alkaline energy source providing a typical

Transponders & Receivers

UHF Receivers
Product Code 517.131.028 UHF Remote Radio Receiver. Receives UHF signals from the transponder/processor.

VHF Transponders & Receivers

Product Codes 517.131.025 Transponder signal processor, receives VHF signals from local devices and transmits on UHF to receiver installed adjacent to main controller. The transponder requires 230v supply and is complete with integral PSU. Unit is fitted with 2 helical aerials. 517.131.026 Transponder for 4-zone addressable system, receives VHF signals from local devices and transmits on UHF to receiver installed adjacent to main controller. Requires 230V and is complete with an integral PSU. Unit is fitted with 2 helical aerials. 517.131.027 VHF remote radio receiver c/w integral PSU. Receives signal from VHF transmitters.

Page 95

Radio Sounders
sounder has 2-way radio communication with the fire system controller using UHF wavebands to receive command instructions and VHF for auto reporting. The radio sounder module 5320 has a set of monitored contacts for the wiring of a remote callpoint, thereby providing a very cost effective component. Designed and manufactured using the latest techniques and surface mount technology ensures component count is kept to a minimum, thereby maximising reliability. The sounder is powered by a low-voltage dual supply Alkaline battery pack. The battery pack condition is continually monitored. The battery pack has been tested to provide a typical 5 years life cycle for normal site operations. The system indicates remaining battery capacity and a low battery condition is indicated to the controller as a fault allowing 30 days for the battery pack to be changed before unit failure. Technical Specification Dimensions: 88 x 88 x 80.6mm Product Codes Red Sounders 517.131.007 Electronic radio sounder c/w VHF transmitter, UHF receiver, processor, radio address module, battery board. 517.131.043 Electronic radio sounder c/w VHF transmitter, UHF receiver, processor, radio address module, battery board. 517.131.050 Red Master radio sounder c/w connections for up to 1 monitored slave voice sounder unit, VHF transmitter, UHF receiver, processor, radio address module. 517.131.051 Red Slave radio sounder - For connection to 5-5350. 517.131.049 Red radio sounder with auxiliary contact input. White Sounders 517.131.044 Electronic radio sounder c/w VHF transmitter, UHF receiver, processor, radio address module, battery board.

The radio sounder is a battery operated sounder remotely activated and monitored by the System 5000 controller. Each unit has a unique address configured during manufacture and is individually addressable by the system controller. Each unit is controlled individually or by zone, dependant on the system design. The radio sounder is housed in an industrystandard, impact-resistant ABS moulding. The

Radio Strobe
Product Codes Red Strobe 517.131.047 Red radio strobe unit. White Strobe 517.131.048 White boxed radio red strobe unit.

Radio Sounder and Strobe

Product Codes Red Sounder & Strobe 517.131.045 Radio sounder and red strobe unit. White Sounder & Strobe 517.131.046 Radio sounder and red strobe unit

Voice Sounder
Product Codes Red Voice Sounder 517.131.052 Red voice sounder c/w VHF transmitter, UHF receiver, processor, radio address module, battery board, 4 on-board messages activated from any EMS controller. White Voice Sounder 517.131.054 White voice sounder c/w VHF transmitter, UHF receiver, processor, radio address module, battery board, 4 on-board messages activated from any EMS controller.

Page 96

Voice Sounder and Strobe

Product Codes Red Voice Sounder& Strobe 517.131.053 Voice sounder/strobe c/w VHF transmitter, UHF receiver, processor, radio address module, battery board, 4 on-board messages activated from any EMS controller. 517.131.056 Weatherproof voice sounder c/w VHF transmitter, UHF receiver, processor , radio address module, battery board, 4 on-board messages activated from any EMS controller. 517.131.057 Master Voice Unit c/w connections for up to 1 monitored slave voice sounder unit. VHF transmitter, UHF receiver, processor, radio address module, battery board, 4 on-board messages activated from any EMS controller. 517.131.058 Slave Voice Unit for connection to 5-5381 with its own monitored battery supply. White Voice Sounder & Strobe 517.131.055 Voice sounder/strobe c/w VHF transmitter, UHF receiver, processor, radio address module, battery board, 4 on-board messages activated from any EMS controller.

Aerials & Ancillaries

UHF Antenna
Product Codes 517.131.022 UHF high gain aerial. 517.131.023 UHF helical antenna c/w BNC connector. 517.131.024 UHF high gain directional aerial c/w wall mounting bracket, extension pole and 10m low loss RG213 cable.

VHF Antenna
Product Codes 517.131.003 VHF aerial c/w 20m RG213 coax cable. 517.131.020 VHF dipole half wave antenna c/w 10M RG58 cable and bracket. 517.131.021 VHF helical aerial c/w BNC connector.

Interface Modules
Product Codes 517.131.008 Interface input/output unit (used for output signals to activate other equipment) c/w transmitter, processor, radio address module, battery board. 517.131.059 Addressable Interface input/output unit (used for output signals to activate other equipment) c/w transmitter, processor, radio address module, battery board. 517.131.060 Interface input/output unit (used for output signals to activate other equipment) c/w transmitter, processor, radio address module, battery board, external antenna and housed in metal case. 517.131.061 Plant I/O shunt unit - for plant isolation during test mode (4 zone).

Service Spares
Product Codes 517.131.033 Analogue addressable optical smoke sensor (Replacement only). 517.131.034 Heat sensor (Replacement only). 517.131.035 Addressable transmitter/processor/battery. 517.131.036 Addressable optical smoke sensor (Replacement only). 517.131.037 Addressable Heat sensor (Replacement only). 517.131.038 Addressable transmitter/processor/battery.

Page 97

APPROVALS LISTING OF COMPANY EQUIPMENT

Thorn Security Limited is registered by British Standards Institution to BS5750 : Part 1 Note: That while every effort is made to keep this document updated, some approvals will be renewed and new approvals will be acquired between updates. Any queries, reference approvals, should be made to the Approvals Engineer [TYCO SAFETY PRODUCTS} Sunbury-on-Thames. The approvals obtained for company equipment are listed in Table 1. The approval bodies are identified by the following abbreviations:AMSA ABS BT BASEEF A BR BSI BV CCG CCR CCS (ZC) CIRL CSA DDRK DMA DOT DNV DTI FM GL HRS IPTT IR KM & P A KRS Australian Maritime Safety Authority. American Bureau of Shipping. British Telecom. British Approval Service for Electrical Equipment in Flammable Atmospheres. Brunamalastofnun Rikisins [Iceland Govt. Approval]. British Standards Institute. Bureau Veritas [France]. Canadian Coastguard. China Corporation Register of Shipping. China Classification Society. Construction Industry Research Laboratory [Australia]. Canadian Standards Association. DDR Schiffsrevision und Klassifikation [Germany]. Danish Maritime Authority [Sfartsstyrelsen]. Department of Transport [UK] - not used. Now Marine Certification Association [MSA]. Det Norske Veritas. Department of Trade and Industry. Factory Mutual [USA]. Germanischer Lloyd. Hellenic Register of Shipping An Roinn agus Telegrafa [Irish Posts, Telephones and Telegraphs]. India Radiology. Korean Marine and Port Authority. Korean Register of Shipping. LPCB LRS MIE MOI MSA NACOS S NC NKK NMA(S) NMD NSI NPTT NRC NRPB NSTC PRS PSB PTB RA RINA RNR RRS SAA SSL UL ULC USCG VdS Loss Prevention Certification Board. Lloyds Register of Shipping. Spanish Ministry of Industry and Energy Italian Ministry of the Interior. Marine Certification Association National Approval Council for Security Systems. Not Coded. Japanese Register of Shipping.[Nippon Kaiji Kyokai]. National Maritime Administration [Sweden, Sjfartsverket]. Norwegian Maritime Directorate [Sjfartdirektortet]. Nederlands Shipping Inspectorate. Dutch Post Office. Nuclear Regulatory Commission [USA]. National Radiological Protection Board [UK]. China - National Supervisory Test Centre China. Polish Register of Shipping. Productivity Standards Board of Singapores Product Listing Scheme (PLS) Physikalisch Technisches Bundesanstalt [Germany]. Radiocommunications Authority [DTI] Registro Italiano Navale [Italy]. Rumanian Register of Shipping. Maritime Register of Shipping [Russia]. Standards Association of Australia. Scientific Services Laboratory of Australia Underwriters Laboratories of the United States. Underwriters Laboratories of Canada United States Coastguard. Verband der Sachversicherer e.V. [Association of Property Insurers] (Germany).

Note: Items in Table 1 with a * against the date, indicates that approvals have been applied for but not yet been received.

TABLE 1: APPROV ALS LISTING OF COMP ANY EQUIPMENT

Type 601 Description Intrinsically Safe System [Ex ia] Authority ABS, BASEEFA [82254] CCS (ZC), PRS, RINA, RNR NKK BASEEFA [89Y2204], NKK PRS, RNR LPCB Approved to BS3116 NSTC LPCB Approved to BS3116 NSTC TNO(Netherlands) ATEX, BASEEFA,CENELEC BT, RINA CCS (ZC), ABS, BV, DMA, DNV, MSA, GL, KRS LPCB, LRS, NKK, NMA(S) PRS, RNR, RRS, USCG, NMD GL, LRS, NKK, RNR, RRS AMSA, CCS (ZC),GL,CCR. KM & PA LRS, NKK - (not 270) AMSA - (230 only) CCR - (230 only) GL - (230 only) CCS (ZC) - (230 only), RNR LRS, NKK, RRS,CCS(ZC),RNR ABS, DMA, MSA, GL, KRS LRS, NKK, NMA(S), RNR RRS, USCG, NMD,DNV, BV,CCS(ZC) ABS, DMA, DNV, MSA GL, KRS, LRS, NKK NMA(S), RNR, RRS, USCG, BV, NMD, CCS(ZC) Type CP 540Ex CP920 CP930 DB3 DHM35/69 DM 520 Description Authority BV, DNV, NKK,CCS,LRS LPCB LPCB ATEX, BASEEFA, CENELEC DNV CCR-(69 only) MSA-(69 only) ABS, BV, CCS (ZC), DMA DNV, MSA, GL, KRS, LPCB LRS, NKK, NMA(S), PRS, RNR RRS, USCG, NMD ABS, BV, CCS (ZC) DMA - (not H600), DNV MSA, GL - (not H600), KRS LPCB, LRS, NKK, RRS, CCR ABS, AMSA (H602 & H902), B V CCR, CCS (ZC) DMA - (H602 only), DNV, MSA GL - (not H900), KRS, LPCB LRS, NKK NSTC - (H602/902 only), RRS ABS, BV, CCS (ZC), DNV, GL KRS, LRS, NKK ABS, GL, KRS, LRS, NKK,DNV CCS(ZC) BASEEFA, BV, LRS ABS, BV, CCS (ZC), DMA DNV, MSA, GL, KRS, LPCB LRS, NKK, NMA(S), PRS RNR, RRS, USCG BASEEFA, KRS, LRS, RNR ABS, AMSA, BASEEFA, BV CCS (ZC), DMA, DNV, MSA GL, KRS,LRS, RNR

602 1700 1700 1700 TNO BG3 C2440 CM 520

Analogue Addressable Intrinsically Safe System [Ex ia] 1-3 Zone Fire Detection System 4-64 Zone Fire Detection System 4-64 Zone Fire Detection System Weatherproof/Intrinsically Safe Conventional Callpoint Charger

Flameproof Horn Sounder

H600, H601

Heat Detector

H602, H900, H901,H902

Heat Detector

CP 200

Call Point

CP 210, 220, 230, 240, 260, 270

H604 H904 IF500Ex LI520

Heat Detector Heat Detector

CP 250 CP 520/CP510

CP 530

M300Ex MS302Ex

Detector Base [I.S.] Flame Detector [I.S.]

Page 98

APPROVALS LISTING OF COMPANY EQUIPMENT

Type M500Ex MD501Ex Description Intrinsically Safe Detector Base Intrinsically Safe Analogue Addressable Heat Sensor Analogue Addressable Ion Chamber Sensor [I.S.] Analogue Addressable Optical Sensor [I.S.] Analogue Addressable High Performance Optical Sensor [I.S.] Analogue Addressable Infra Red Sensor [I.S.] Gr. 1 Rate of Rise Heat Detector Conventional Rate of Rise Heat Detector Gr. 2 Fixed Temp. Heat Detector Conventional Fixed Temperature Heat Detector Heat detector 135 F Fixed/ R-of-R Heat detector 135 F Fixed Heat detector 200 F Fixed Gr. 1 Rate of Rise Heat Detector Gr. 2 Static Heat Detector Enhanced Carbon Monoxide Fire & Heat Detector Conventional Ion Chamber Smoke Detector Ion Chamber Detector Ion Chamber Detector Ionisation Smoke Detector Ion Chamber Detector Optical Smoke Detector Optical Smoke Detector Conventional High Performance Optical Smoke Detector Photoelectronic Smoke Detector Optical Smoke Detector High Performance Optical Smoke Detector High Performance Optical Smoke Detector High Performance Optical Smoke Detector Analogue Addressable Heat Sensor Heat Detector Head Analogue Addressable Ion Chamber Detector Analogue Addressable Ion Chamber Detector Ionisation Detector Head Analogue Addressable Optical Smoke Sensor Analogue Addressable Optical Smoke Sensor Photoelectronic Detector Head Analogue Addressable High Performance Optical Sensor Conventional CarbonMonoxide Detector High Performance Photoelectronic Smoke Detector Head Authority ABS, LPCB, DNV, KRS LRS, RNR, USCG ABS, BASEEFA, BV, CCS (ZC) DNV, GL, KRS, LRS, NKK PRS, RNR, RRS, USCG ABS, BASEEFA, BV, CCS (ZC) DNV, GL, KRS, LRS, NKK NRPB, PRS, RNR, RRS, USCG ABS, BASEEFA, BV, CCS (ZC) DNV, GL, KRS, LRS, NKK, PRS RNR, RRS, USCG BASEEFA ABS, AMSA, BASEEFA, BV CCG, CCS (ZC), DNV, NMA(S) KRS LPCB, MIE,LRS,ABS, ABS, DNV, (LRS,KRS,BV,NKK Pending) LPCB, MIE ABS, DNV, (LRS,KRS,BV,NKK Pending) UL, ULC UL, ULC UL, ULC VdS VdS ABS, DNV, (LRS,KRS,BV,NKK Pending) ABS, DNV (LRS,KRS,BV,NKK pending) NRPB, LPCB, NSTC, BV ABS, BV, DNV, GL, KRS MSA, LRS, NKK, PRS, RRS UL VdS LPCB, LRS, MIE ABS, BV, DNV, GL, KRS MSA, NKK, PRS ABS, DNV, (LRS,KRS,BV,NKK Pending) UL, ULC, FM VdS LPCB, MIE NEDG, UL, ULC, FM VdS LPCB, NSTC, MIE,LRS,ABS,DNV,KRS,MSA UL, ULC, FM LPCB, NSTC,NRPB,RINA,RRS, USCG, BV ABS, BV, DNV, GL, KRS, MSA LRS, NKK, PRS UL, ULC, FM LPCB, LRS, MIE ABS, BV, DNV, GL, KRS, MSA NKK, PRS UL, ULC, FM LPCB, NSTC, MIE ABS,DNV,(LRS,KRS,BV,NKK pending) UL, FM PSB,LPCB LPCB, NSTC LPCB, NSTC, PSB,TNO LPCB, NSTC, PSB, TNO LPCB, NSTC CSA, BASEEFA ABS, BV, DNV, FAB, GL, LPCB ANPI/BOSEC, LRS AB(Sweden) ANPI/BOSEC LRS,LPCB ABS, AMSA, BV, CCS (ZC) DMA, DNV, MSA, GL, KRS LPCB, LRS, NKK, NMA(S) PRS, RRS, USCG T1000 T110 T210 T882 Marine Controllers I.R. Test Source I.R. Test Source 4-Zone Fire Controller Type Relay 5000 Relay 5010 S111, S112 Description IR Flame Detector Authority BT BT ABS, BASEEFA [812333], BV CCS (ZC), DMA, MSA, KRS LPCB, LRS, PRS, RRS, SAA VdS ABS, BASEEFA [812333], BV CCS (ZC), CSA, DMA, MSA KRS, LPCB, LRS, SAA, VdS ABS, BASEEFA [812333] BV, CCS (ZC), DMA, MSA KRS, LRS, SAA ABS, BASEEFA [812333], DNV MSA,PRS, LRS, NSTC, SAA VdS BASEEFA [87Y3550], DNV MSA, LPCB, LRS DMA, BASEEFA [EX94C1388] LPCB, DNV, LRS, MSA, NSTC,KFEIC,SSL DMA, BASEEFA [EX94C1388],FM DMA, BASEEFA [EX94C2080] LPCB, DNV, LRS, MSA,NSTC,KFEIC,SSL DMA, BASEEFA [EX94C1388] LPCB, DNV, LRS,MSA, NSTC,KFEIC,SSL DMA, BASEEFA [EX94C2080] LPCB, DNV, LRS, MSA,NSTC,KFEIC,SSL DMA, BASEEFA [EX94C1388] LPCB, DNV, LRS, MSA,NSTC,KFEIC,SSL DMA, BASEEFA [EX94C1388] FM DMA, BASEEFA [EX94C2080], LRS,MSA DMA, BASEEFA [EX94C1388] LPCB,DNV, LRS, MSA,NSTC,KFEIC,SSL DMA, BASEEFA [EX94C1388] FM ABS, BV, CCS (ZC), DMA MSA, GL, KRS, LPCB, LRS NKK, NMA(S), PRS, RNR RRS, USCG, DNV ABS, BV, CCS (ZC), DMA MSA, GL, KRS, LPCB, LRS NKK, NMA(S), PRS, RNR RRS, USCG, DNV ABS, BV, CCS, DNV, GL, NKK KRS, LRS, RINA, RRS, MSA BASEEFA [Ex84B2224] BASEEFA [Ex84B2224] ABS, BV, CCS (ZC), CCR, DNV MSA, GL, KRS, LRS, NKK, PRS RINA, RNR, RRS, CCG,NMD,DMA , DOT ABS, AMSA, BV, CCS (ZC) CCG, DNV, MSA, GL, KRS LRS, NKK, NMA(S), PRS, RINA RNR, RRS, USCG,DMA,NMD,DOT ABS, BV, CCS (ZC), CCG DMA, DNV, MSA, GL, KRS NKK, NMA(S), PRS, RNR, RINA RRS, USCG, LRS, NMD,DOT LPCB LPCB LPCB(Pending) BASEEFA, CENELEC BASEEFA, CENELEC, ATEX

MF501Ex

S121

IR Flame Detector

MR501Ex

S122

IR Flame Detector

MR501TEx MS502Ex

S131

IR Flame Detector

S161 S231f+

I.R. Flame Detector I.R. Flame Detector (Flameproof)

MD601 DNV,KRS,MSA MD601EX MD611 MD611EX 612H 622H 632H MD613 MD623 MDU601EX MF601EX MF601 MF601M 612I MF613 MR601 MR601M MR601TEX 612P MR613 MR601T 612HP MR613T MD901 912H MF901 MF901M 912I MR901 MR901M 912P MR901T MU601EX 912HP MINERVA 8 MINERVA 16R MINERVA 16E MINERVA 80 MINERVA 80R MTL NT100

S232f+ S231i+

I.R. Flame Detector (Flameproof) I.R. Flame Detector (I.S.)

S241f+

I.R. Flame Detector (Flameproof)

S241i+

I.R. Flame Detector (I.S.)

S251f+

I.R. Flame Detector (Flameproof)

S252f+ S251i+ S261f+

I.R. Flame Detector (Flameproof) I.R. Flame Detector (I.S.) I.R. Flame Detector (Flameproof)

S262f+ SB520

I.R. Flame Detector (Flameproof) Sounder Booster Module

SM520

Sounder Module

T890

80-Zone Fire Controller [Minerva Marine]

T891

16-Zone Fire Controller [Minerva Marine]

ThornNet TLK530 WIRE FREEPRODUCT RANGE XB8 Intrinsically Safe Beacon XB11 Flameproof XenonBeacon

Intrinsically Safe Systems Equipment 8 and 16 Zone Controllers

NTR08/NTR16 PRECEPT RM520

Releasing Panels Marine Fire Controller

Page 99

Standard AutoCAD Symbols

Tyco Safety Products now has an IntraNet site devoted to users of AutoCAD Design Packages for electronic and electrical systems. The site has been set up with a view to utilising a common approach to AutoCAD output for drawing offices using Tyco Safety Products products and systems. Initially this site includes Standard Symbols for Tyco MX Technology & MX-Graph, Fire, CCTV and Access Symbol Name FACPMTGX.dwg ADDRESSABLE ACPM MODULE Products and also Diagrams for many Tyco Safety Products products supplied from the UK, this will be expanded to include all Tyco Safety Products products. Please encourage your CAD operators to visit this website. Even if you're business does not use all these products many of the symbols, schematics and drawings may be adapted quickly and easily for other products. Symbol Name FAM.dwg CONVENTIONAL ASPIRATING MODULE Symbol Name FAN.dwg CONVENTIONAL ANALYSER If you require any further information on this or other aspects of CAD development please contact the helpdesk on +44 (0) 1932 743 327 or contact our website at www.tycosafetyproducts-europe.com.

Symbol Name FASU.dwg CONVENTIONAL ASPIRATING SAMPLING UNIT Symbol Name FBELLTGX.dwg ADDRESSABLE BELL

Symbol Name FBANTGX.dwg ADDRESSABLE BANSHEE SOUNDER (Variants available) Symbol Name FBI.dwg CONVENTIONAL BELL INTERFACE

Symbol Name FBAR.dwg CONVENTIONAL FIRE BARRIER

Symbol Name FBATT.dwg CONVENTIONAL BATTERY UNIT

Symbol Name FBRX.dwg CONVENTIONAL BEAM RECEIVER

Symbol Name FBTX.dwg CONVENTIONAL BEAM TRANSMITTER

Symbol Name FCHARGER.dwg CONVENTIONAL CHARGER

Symbol Name FCMTGX.dwg ADDRESSABLE CONTACT MODULE

Symbol Name FCPSTGX.dwg ADDRESSABLE CALLPOINT

Symbol Name FCPTGX.dwg ADDRESSABLE CALLPOINT

Symbol Name FCPWPTGX.dwg ADDRESSABLE WEATHERPROOF CALLPOINT Symbol Name FEOL.dwg CONVENTIONAL END OF LINE UNIT

Symbol Name FDMTGX.dwg ADDRESSABLE DETECTOR MODULE

Symbol Name FDRUTGX.dwg ADDRESSABLE DOOR RELEASE UNIT

Symbol Name FELIGHT.dwg CONVENTIONAL EMERGENCY LIGHT

Symbol Name FEXIT.dwg CONVENTIONAL EMERGENCY LIGHT

Symbol Name FFDTGX.dwg ADDRESSABLE FLAME DETECTOR

Symbol Name FFLTGX.dwg ADDRESSABLE XENON BEACON

Symbol Name FFTTGX.dwg ADDRESSABLE FIXED TEMPERATURE HEAT DETECTOR Symbol Name FICDPTGX.dwg ADDRESSABLE IONISATION DUCT PROBE Symbol Name FIRFDTGX.dwg ADDRESSABLE IR FLAME DETECTOR

Symbol Name FHD.dwg CONVENTIONAL HEAVY DUTY RELAY

Symbol Name FICTGX.dwg ADDRESSABLE ION CHAMBER SMOKE DETECTOR Symbol Name FISH.dwg CONVENTIONAL INTRINSICALLY SAFE HOUSING Symbol Name FMPIM.dwg CONVENTIONAL MPIM MODULE

Symbol Name FHPTGX.dwg ADDRESSABLE HIGH PERFORMANCE OPTICAL SMOKE DETECTOR Symbol Name FICV.dwg CONVENTIONAL IONISTATION DETECTOR FLOOR/CEILING VOID Symbol Name FJB.dwg CONVENTIONAL JUNCTION BOX

Symbol Name FICDP.dwg CONVENTIONAL IONISATION DUCT PROBE Symbol Name FII.dwg CONVENTIONAL INTRUDER INTERFACE

Symbol Name FLBTGX.dwg ADDRESSABLE LAMP BUZZER

Symbol Name FMEDCPTGX.dwg ADDRESSABLE MEDC CALLPOINT

Symbol Name FNAU.dwg CONVENTIONAL NETWORK ATTACHMENT UNIT Symbol Name FPAC1.dwg CONVENTIONAL CABINET MOUNTED SPEAKER

Symbol Name FOMNI660.dwg ADDRESSABLE OMNIGUARD 660 DETECTOR Symbol Name FPAC2.dwg CONVENTIONAL CABINET MOUNTED BI DIRECTIONAL SPEAKER

Symbol Name FOMNI860.dwg ADDRESSABLE OMNIGUARD 860 DETECTOR Symbol Name FPAC3.dwg CONVENTIONAL CABINET MOUNTED TRI DIRECTIONAL SPEAKER

Symbol Name FOVALVE.dwg CONVENTIONAL OIL VALVE

Page 100

Symbol Name FPAC4.dwg CONVENTIONAL CEILING MOUNTED SPEAKER Symbol Name FPODPTGX.dwg ADDRESSABLE PHOTO OPTICAL DUCT PROBE

Symbol Name FPAC5.dwg CONVENTIONAL HORN

Symbol Name FPANEL.dwg CONVENTIONAL PANEL

Symbol Name FPM.dwg CONVENTIONAL PLANT MODULE

Symbol Name FPOTGX.dwg ADDRESSABLE OPTICAL SMOKE DETECTOR Symbol Name FPUTGX.dwg ADDRESSABLE PLANT INTERFACE MODULE

Symbol Name FPOV.dwg CONVENTIONAL PHOTO OPTICAL DETECTOR FLOOR/CEILING VOID Symbol Name FREP.dwg CONVENTIONAL REPEATER PANEL

Symbol Name FPROG.dwg CONVENTIONAL PROGRAMMER

Symbol Name FPSU.dwg CONVENTIONAL POWER SUPPLY UNIT

Symbol Name FRI.dwg CONVENTIONAL REMOTE INDICATOR

Symbol Name FRMTGX.dwg ADDRESSABLE RELAY MODULE

Symbol Name FRORTGX.dwg ADDRESSABLE RATE OF RISE HEAT DETECTOR Symbol Name FS200.dwg ADDRESSABLE S200 FLAME DETECTOR

Symbol Name FRSU.dwg CONVENTIONAL REFERENCE SAMPLING UNIT Symbol Name FSB.dwg CONVENTIONAL SOUNDER BOOSTER MODULE Symbol Name FSDTGX.dwg ADDRESSABLE SMOKE DAMPER INTERFACE MODULE Symbol Name FSPLY.dwg CONVENTIONAL POWER SUPPLY UNIT

Symbol Name FRU.dwg CONVENTIONAL RESET UNIT

Symbol Name FS100.dwg ADDRESSABLE S100 FLAME DETECTOR

Symbol Name FSCI.dwg CONVENTIONAL SHORT CIRCUIT ISOLATOR

Symbol Name FSDRTGX.dwg ADDRESSABLE SOUNDER

Symbol Name FSDRWTGX.dwg ADDRESSABLE WEATHERPROOF SOUNDER Symbol Name FSOUNDER.dwg CONVENTIONAL SOUNDER

Symbol Name FSI.dwg CONVENTIONAL SHUNT INTERFACE

Symbol Name FSMTGX.dwg ADDRESSABLE SOUNDER MODULE

Symbol Name FSR.dwg CONVENTIONAL SLAVE RELAY

Symbol Name FSUTGX.dwg ADDRESSABLE SHOP INTERFACE UNIT

Symbol Name FT525.dwg CONVENTIONAL INDICATOR & MODE SELECT UNIT Symbol Name FT529.dwg CONVENTIONAL ABORT BUTTON

Symbol Name FT526.dwg CONVENTIONAL DELAY BUTTON

Symbol Name FT527.dwg CONVENTIONAL ELECTRICAL MANUAL RELEASE UNIT Symbol Name FTM.dwg CONVENTIONAL TIMER MODULE

Symbol Name FT528.dwg CONVENTIONAL MECHANICAL MANUAL RELEASE UNIT Symbol Name FVESLC.dwg ADDRESSABLE VESDA LASER COMPACT

Symbol Name FTCH.dwg CONVENTIONAL TERMINAL CHAMBER

Symbol Name FVESLP .dwg ADDRESSABLE VESDA DETECTOR

Symbol Name FVESLS.dwg ADDRESSABLE VESDA SCANNER

Symbol Name FVESRT.dwg ADDRESSABLE VESDA OPTIONAL REMOTE DISPLAY

Symbol Name FVESSR.dwg ADDRESSABLE VESDA SUB RACK

Symbol Name FVMTGX.dwg ADDRESSABLE VOICE MODULE

Symbol Name FXIOM.dwg CONVENTIONAL XIOM MODULE

Page 101

INDEX
Stockcode 10-115 171.392 20-100 Product Description SR2-T KAC Backbox With Two Terminals Multiple tone sounder with adj. Volume control - Deep base 6 Inch 24v Dc Electronic Bell Weatherproof - Wormald Branded White 6 Inch 24v Dc Electronic Bell Wormald Branded Red 2W Xenon Beacon Low Profile Red 24v Dc 2watt 5W Xenon Beacon Low Profile Red 24v Dc 5watt Combined Roshni Sounder / Strobe. Fixed to Tone 3 Sweeping 800/970 Hz at 1 Hz 3W Xenon Beacon Low Profile Red 24v Dc 3watt CB200 1 ZONE CONVENTIONAL PANEL CB200 2 ZONE CONVENTIONAL PANEL C1437 4 way alarm extender board; CE requirement - PCB must be supplied c/w cabinets A1466 1 x double pole relay board (1A contacts); CE requirement PCB must be supplied c/w cabinets PRESCIENT SPRINKLER PREACTION PANEL EXTINGUISHING CONTROL PANEL Status indicator; maximum load 3 per panel Status indicator complete with manual release and auto/manual keyswitch; maximum load - 3 per panel Status indicator complete with manual release and auto/manual keyswitch & timer hold; maximum load - 3 per panel Weatherproof 3 way status indicator; maximum load - 1 per panel Weatherproof 3 way status indicator with keyswitch; maximum load - 1 per panel Actuator Suppression Kit Control Equipment Ltd Enclosure c/w 1A PSU & space for 4 x C1437 and 2 x A1466 & 6.2AH battery set Control Equipment Ltd Enclosure c/w 3A PSU & space for 2 x C1324 or 4 x C1437 boards Control Equipment Ltd Enclosure c/w 5A PSU & space for 2 x C1324 or 4 x C1437 boards Weight monitoring system complete (1 load cell and 1 unit) PRECEPT MARINE 2 ZONE 24V DC CONTROL PANEL PRECEPT MARINE 4 ZONE 24V DC CONTROL PANEL PRECEPT MARINE 8 ZONE 24V DC CONTROL PANEL PRECEPT MARINE 16 ZONE 24V DC CONTROL PANEL PRECEPT MARINE 32 ZONE 24V DC CONTROL PANEL PRECEPT MARINE 2 ZONE 230V CONTROL PANEL PRECEPT MARINE 4 ZONE 230V CONTROL PANEL PRECEPT MARINE 8 ZONE 230V CONTROL PANEL PRECEPT MARINE 16 ZONE 230V CONTROL PANEL PRECEPT MARINE 32 ZONE 230V CONTROL PANEL Manual Release Unit Weatherproof Manual Release Unit (IP65) 12v 2.1Ah Rechargable Battery 12v 2.8Ah Rechargable Battery 12v 7Ah Rechargable Battery 12v 1.2Ah Rechargable Battery 12v 65Ah Rechargable Battery (Np65-12) Page 79 40-104 81 40-105 81 81 508.013.031 88 508.014.011.A 88 508.014.011.T 82 88 23 23 508.014.013.A 508.014.013.T 508.014.015.A 508.014.015.T 508.014.019 508.014.020 508.014.021 508.014.022 508.014.023 508.014.024 508.014.026 508.014.027 508.014.028 508.014.029 508.014.030 508.014.031 508.014.032 508.014.033 508.014.035 508.014.036 508.014.037 508.014.038 508.014.039.A 32 508.014.039.T 32 32 508.014.047 508.014.048 508.014.050 23 508.014.053 23 508.014.055 508.013.016 508.013.030 Stockcode 40-103 Product Description DRU/24B Door Release Unit 24vdc With Keeper Plate Door Release Unit 240v Ac With Keeper Plate Floor Mounting Brackets For 40-103/104 T680M Power Changeover Unit T882M 4 Zone Conventional Controller C/W PSU T882M 4 Zone Conventional Controller W/O PSU 1700 2 Aperture Housing With ADT Branding 1700 2 Aperture Housing In Thorn Security Branding 1700 3 Aperture Housing In ADT Branding 1700 3 Aperture Housing In Thorn Security Branding 1700 5 Aperture Housing In ADT Branding 1700 5 Aperture Housing In Thorn Security Branding 1700 Aperture Blanking Plate 1700 Alarm PCB & Display 1700 Alarm Repeater Display 1700 16 Zone Repeater Display 1700 4 Zone PCB & Display 1700 8 Zone PCB & Display 1700 Sector Sounder PCB 1700 Sounder Extension PCB 1700 Relay PCB 1700 Multiplex Tx PCB 1700 Multiplex Rx PCB 1700 External Power Interface PCB 1700 1.5 Amp 240v PSU 1700 3 Amp 240v PSU 1700 Custom Legend Strips,Blank 1700 1.5 Amp 115 V PSU 1700 3 Amp 115v PSU 1700 Installation Kit For 5 Aperture Housing 1700 8 Aperture Housing - ADT Branded 1700 8 Aperture Housing - Thorn Branded 1700 Installation Kit For 3 Aperture Housing 1700 Coincidence Module PCB 1700 Alarm Unit Display Dutch TNO 1700 Battery Clamp Kit For 10Ah Batteries S1700 KEY System 1700 Spare Key TOK001 Farnell Part Number 149-964 1700 Extinguishing Cards Thorngraph 22" Touchscreen Liyama Touch Pro 510 Complete With 5 Year Warranty Dell GX110 PC for use with ThornGraph or MxGraph depending on the software ordered - includes 250Mb Iomega internal zip drive With Windows NT 4, Service Pack, Preloaded and defined with default passwords Software Package A For 1 Network Node Software Package B For 2-5 Network Node Software Package C For 6 Or More Network Nodes Software Package D For Additional Graphics Nodes On The Same Thorn Net NTR08-011-03 Conventional Extinguishing Release Fire Controller - Finnish NTR08-011-05 Conventional Extinguishing Release Fire Controller - Swedish NTR08-003-02 Conventional Extinguishing Release Fire Controller - U.K. NTR08-004-02 Conventional Extinguishing Release Fire Controller - Belgian Page 40 508.022.009 40 508.022.010 40 38 36 508.022.014 36 27 27 27 508.022.018 27 508.022.019 27 508.022.021 27 27 24 26 26 25 25 25 25 25 26 26 24 24 24 27 24 24 27 27 27 508.022.042 27 27 508.022.043 24 27 508.022.044 508.022.016 508.022.017 508.022.011 Stockcode 508.022.008 Product Description Page NT108-001-01 8 Zone Conventional Fire Controller U.K. 28 NT108-002-01 8 Zone Conventional Fire Controller Belgian 28 NT108-002-14 8 Zone Conventional Fire Controller Dutch 28 NTF08-009-08 8 Zone Conventional Fire Controller Finnish C/W Firemans Interface 28 NTF08-009-11 8 Zone Conventional Fire Controller Danish C/W Firemans Interface 28 NT116-001-01 16 Zone Conventional Fire Controller U.K. 28 NT116-002-01 16 Zone Conventional Fire Controller Belgium 28 NT116-002-14 16 Zone Conventional Fire Controller Dutch 28 NT116 ESP 16 Zone Conventional Nt Panel - Spanish 28 NTR16-004-07 Dual Conventional Extinguishing Release Fire Controller Dutch 29 NTR16-011-03 Dual Conventional Extinguishing Release Fire Controller Finnish 29 NTR16-011-04 Dual Conventional Extinguishing Release Fire Controller Norweigan 29 NTR16-011-06 Dual Conventional Extinguishing Release Fire Controller Danish 29 NTF16-009-08 16 Zone Conventional Fire Controller Finnish C/W Firemans Interface 28 NTM08-008-01 T1008 8 Zone Marine Nt Conventional Fire Controller 36 NTM16-008-01 T1016 16 Zone Marine Nt Conventional Fire Controller 36 T1016R Full Function Repeater - Up To 3 Per Panel 36 NT 116R NT Full Function Repeater (UK) Maximum 3 Per Panel 28 NTF08 Dutch 8 Zone Conventional Detection Panel With Fireman's Interface 28 NTF16 Dutch 16 Zone Conventional Detection Panel With Fireman's Interface 28 NTR Dutch 8/16 Zone Repeater For Use With Dutch NTF08 And NTF16 28 MXCE T540 2 ZONE CONVENTIONAL EXTINGUISHING CONTROLLER 31 MXCE T550 4 ZONE CONVENTIONAL EXTINGUISHING CONTROLLER 31 MXCE T563 3 INDICATOR STATUS UNIT 35 MXCE T564 4 INDICATOR STATUS UNIT WITH MODE SELECT SWITCH 33 1 Zone - DETEK Water/Flood Detection Control Panel 92 2 Zone - DETEK Water/Flood Detection Control Panel 92 4 Zone - DETEK Water/Flood Detection Control Panel 92 MSB-6B-PV4 24 Volt 6" Bell 22 EOL Sounder Circuits For 1600 Controllers 86 T882 Terminal Field 36 T882 Power Supply 36 T882 Short Voyage Spares Kit 36 T882 Long Voyage Spares Kit 36 Active End Of Line Unit 48 NT100 Series Spare Commissioning Kit Included With All Panels 28, 29, 36 NT100 4 Way Expansion Board Supplied Fitted To The NTF And NTR Controllers. Also Supports NTX-02,03,04 Expansion Boards 29, 36

20-101 20-112 20-113 20-118

20-120 2500/021 2500/022 2500/032

23

508.022.022

2500/034

508.022.023

23

2500/045

508.022.025

32 32

2500/048 2500/049

508.022.029

508.022.035

32

2500/050

508.022.036

32

2500/051

508.022.037 508.022.038

2500/052

2500/053 2500/220

2500/221

2500/222

23 32 37 37 37 37

2500/507 2500/755 2500/756 2500/757 2500/758 2500/759 2500/774 2500/775 2500/776 2500/777 2500/778 2501/025 2501/028 3010 3071 3072 3085 3150

508.014.056 508.020.006

24 26

508.030.501

508.030.502 3 508.030.503 508.030.504

508.020.007

3 3 3 3

508.200.004 508.200.005 508.200.006 508722 509.013.031 509.013.064 509.013.068 509.013.080 509.013.081 509.018.006 509.022.001

508.020.101 37 508.020.102 37 508.020.103 37 508.020.104 37 37 37 32 32 39 39 39 39 39 508.022.001

29

508.022.002

29 509.022.003 29

508.022.003

508.022.004

29

Page 102

INDEX
Stockcode 509.022.004 Product Description Page NTX-02 NT100 16 Way Relay Output Board (24v Dc@1a) Requires NTX-01 Expansion Board 29, 36 NT100 16 Way Digital Output Driver Board - Requires NTX-01 Expansion Board 29, 36 NT100 16 Way Digital Input Board For Use On Special NT Controller Variants Only 29 PRN-01 NT100 Optional Integral Printer For Use With All NT Controller Variants 29 PRN-02 NT100 Spare Printer Paper For PRN-01 8, 28, 29 T1008/16 Spare PSU For Ntm Variants 36 NT100 Spare PSU For NT,NTR & NTF Variants 28, 29 NT Flush Mount Bezel 28, 29, 36 T 1008/16 Spare Marine Display Module 36 T1000/NTM Marine CPU V1.6 Spare 36 T1000 Marine Repeater CPU V1.6R Spare 36 NT/NTR/NTF Display PCB Spare 28, 29 NT116R - PCB UK Nt116r CPU Board PCB 28 Scantronic Microcom Kit for MX Conventional Panels 31 MXC Spare Panel Key (Pack of 2) 31 MXC/ MXCE ZONE END OF LINE UNIT - SUPPLIED IN PACKS OF 8 31 T561 EXTINGUISHING RELEASE CALLPOINT 34 CP200 Callpoint Complete With Backbox. Arabic English 'Fire' Marking. Thorn Security Branded Lid 75 CP 220EX Red Callpoint Intrinsically Safe For Use With BASEEFA Certified Conventional System 601. English 'Fire' Marking And Thorn Security Branded Lid. Simple Apparatus Marking 66 CP 230 Red Callpoint IP67 Weatherproof Complete With LED Indicator - LPCB Approved.English 'Fire' Marking And ADT Branded Lid 75 CP 230 Red Callpoint IP67 Weatherproof Complete With LED Indicator - LPCB Approved.English 'Fire' Marking And THORN Branded Lid 75 CP 230 Red Callpoint IP67 Weatherproof Complete With LED Indicator - LPCB Approved International Fire And Tyco Branded Lid 75 CP 260 M Marine Callpoint 'Fire Alarm' Complete With LED Indicator-Waterproof 76 CP 250 M Marine Callpoint 'Firealarm' Complete With LED Indicator-Surface 76 CP270 Yellow Callpoint 'Evacuate' Complete With LED Indicator And Backbox - LPCB Approved. English 'Fire Evacuate' Marking And Thorn Branded 75 IF500EX Intrinsically Safe Addressable Interface Module 64, 66 CP 530 Red Addressable IP67 Weatherproof Callpoint Complete With LED Indicator - Marine Approved.English 'Fire' Marking And Thorn Security Branded Lid. 76 CP 540EX Red Callpoint Intrinsically Safe For Use With IF500ex. English 'Fire' Marking And Thorn Security Branded Lid. Simple Apparatus Marking 66 CP 200 Red Callpoint 'Alert' Complete With LED Indicator Without Backbox - LPCB Approved. English 'Fire' Marking And Branded Lid 75 Stockcode 514.001.042.T Product Description CP 200 Red Callpoint 'Alert' Complete With LED Indicator Without Backbox - LPCB Approved. English 'Fire' Marking And Thorn Branded Lid CP 200 Red Callpoint 'Alert' Complete With LED Indicator Without Backbox - LPCB Approved. International Fire Marking And Tyco Branded Lid CP210 Red Callpoint 'Evacuate' Complete With LED Indicator Without Backbox - LPCB Approved. English 'Fire Evacuate' Marking And ADT Branded CP 210 Red Callpoint 'Evacuate' Complete With LED Indicator Without Backbox - LPCB Approved. English 'Fire Evacuate' Marking And THORN Branded CP210 Red Callpoint 'Evacuate' Complete With LED Indicator Without Backbox - LPCB Approved. International Fire Marking And Tyco Branded CP 520 Red Addressable Callpoint Complete With LED Indicator Without Backbox Marine Approved English 'Fire' Marking And Thorn Security Branded Lid. CP 920 Red Addressable Callpoint Complete With LED Indicator Without Backbox LPCB Approved. English 'Fire' Marking And ADT Branded Lid CP 920 Red Addressable Callpoint Complete With LED Indicator Without Backbox LPCB Approved. English 'Fire' Marking And THORN Branded Lid CP920 Red Addressable Callpoint Complete With LED Indicator Without Backbox - LPCB Approved. International Fire Marking And Tyco Branded Lid CP 930 Red Addressable IP67 Weatherproof Callpoint Complete With LED Indicator - LPCB Approved English 'Fire' Marking And ADT Branded Lid CP 930 Red Addressable IP67 Weatherproof Callpoint Complete With LED Indicator - LPCB Approved English 'Fire' Marking And THORN Branded Lid CP 930 Red Addressable IP67 Weatherproof Callpoint Complete With LED Indicator - LPCB Approved International Fire Marking And Tyco Branded Lid CP 950EX MEDC Weatherproof Intrinsically Safe Callpoint With Integral Analogue Addressable Module IF 520EX MEDC Heavy Duty Intrinsically Safe Callpoint With Integral Analogue Addressable Module CP937 Red Addressable IP55 Outdoor Callpoint.Based On The KAC Series 7000 - ADT Branded. Eexd MEDC SM87BG Heavy Duty Alloy Breakglass With Integral CP530 Potted Addressable Module Spare Glass & O Ring Assembly For SM87BG CP200E Conventional Callpoint With European Fire Symbol And Glass Complete With LED Indicator Breakglass Callpoint, Red GRP material, Weatherproof, IP66/67 (BG3W4LBN) Breakglass Callpoint, GRP material, Certified EExia IIC T4, IP66/67, ATEX EX II 1G (BG3I4NBN) Page Stockcode 514.001.060.A Product Description CP211 Red MXC Callpoint 'Evacuate' Complete With LED Indicator Without Backbox LPCB Approved. English 'Fire Evacuate' Marking And ADT Branded. CP211 Red MXC Callpoint 'Fire/Evacuate' Complete With LED Indicator Without Backbox - LPCB Approved. International Fire Marking and glass, Thorn Branded CP211 Red MXC Callpoint 'Fire/Evacuate' Complete With LED Indicator Without Backbox LPCB Approved. International Fire Marking and glass, Tyco Branded Breakglass Callpoint GRP Weatherproof marked simple appartus. (BG3W4NBNZ) CP530 MODULE Analogue Addressable Potted Module Only For Use In Alternative Callpoints Or Other Similar Devices BOMB ALERT White Keyswitch In Callpoint Housing. English 'Bomb Alert' Marking With ADT Branded Lid ZF121 Callpoint Glass(Pack 10) For Service Spares The ZF121 Is A Square Metal Fronted AFA MINERVA Callpoint Typically Used On Firefinder, System 1100 ,ZF/System1200, CP And CT Systems CP100A Glass Unscored (Pk10) For Service Spares Walsall Callpoint Glasses (Pack 10) For Service Spares P200/500/900 Spare Glasses, White Arabic Text On Clear Background (Pack-5) Red Surface Mounting Back Box For CP200/500 & 900 Callpoints CP200/500/900 Spare Glasses For CP200N/CP500N, White Dutch Text On Clear Background (Pack 5) CP200/500/900 Spare Glasses, White Arabic/English Text With Thorn Security Logo On White Background (Pack 5) CP200/500/900 Spare Glasses, Clear English Text On White Background. No Logo (Pack 5 Black Callpoint Bezel For CP200/500/800/900 Deformable Operating Unit With English Text For Use In Place Of Glasses Callpoint Hinged Cover For Use On CP200, 800 And 900 Series Call-Point STI6530 Red Stopper For Use With Most Flush Mount Callpoints Up To 100mm Square STI6531 Red Stopper For Use With Most Surface Mount Callpoints Up To 100mm Square (Including CP Series) STI6532 Red Stopper With Integral Sounder For Use With Most Flush Mount Callpoints Up To 100mm Square (Including CP Series) STI6533 Red Stopper With Integral Sounder For Use With Most Surface Mount Callpoints Up To 100mm Square (Including CP Series) IPO36 Stopper Break Seal Kit For Fitting To Stopper, Stopper II And Weather Stopper STI1230 Red Stopper II For Protecting Larger Callpoints Such As CP230 And CP930 Up To 140mm Square Page

509.022.005

75 514.001.060.T

514.001.042.Y

75

509.022.006

75

509.022.007

514.001.043.A

75

514.001.060.Y 75

509.022.008 509.022.010 509.022.011 509.022.013 509.022.015 509.022.016 509.022.024 509.022.033 509.022.035 509.030.005 509.030.015 509.030.016 509.030.017 514.001.006

514.001.043.T

75

514.001.061 75 514.001.512

514.001.043.Y

65

75 514.002.002.A

76

514.001.046

75

515.001.003 76

514.001.049.A

76 515.001.009 515.001.010 76 515.001.014

79 79 79

514.001.049.T

514.001.009

514.001.049.Y

79 79

515.001.021 76 515.001.023

514.001.050.A

514.001.010.A

79

515.001.024 76

514.001.050.T

514.001.010.T

79

515.001.025 76 515.001.026 515.001.027 76 515.001.028

79 76

514.001.050.Y

514.001.010.Y

79

514.001.052

514.001.012

76

66

515.001.029

514.001.013

514.001.053

77

515.001.030 66

514.001.014

514.001.054.A

77

76

515.001.031

514.001.055

514.001.017 514.001.022

65 515.001.032 65

77

514.001.056 514.001.057

514.001.023

77

75

515.001.033

514.001.058

77

65

515.001.034

514.001.042.A

514.001.059

77, 78

65

Page 103

INDEX
Stockcode 515.001.035 Product Description STI3150 Red Weather Stopper II For Weather Proofing And Protecting Larger Callpoints Such As CP230 And CP930 Up To 140mm Square STI6535 Red Weather Stopper For Weather Proofing And Protecting Callpoints And Other Devices Up To 100mm Square STI6400 Exit Stopper - Red Emergency Exit Alarm - Battery Operated STI6200 Fire Extinguishing Theft Stopper - Red - Battery Operated CO23 Spare key for Exit STOPPER Spare Key For IF520EX Callpoint And Other MEDC SM87PB Based Callpoints 612H Conventional 135F Rate Of Rise Heat Detector - UL Listed Grinnell Branded 632H Conventional Heat Detector 200F Degrees Fixed Temperature UL Listed - Grinnell Brand 612I Conventional Ion Chamber Detector - UL Listed - Grinnell Branded 612P Conventional Optical Smoke Detector - UL Listed-Grinnell Branded 612PH Conventional High Performance Optical Smoke Detector - UL Listed - Grinnell Branded 912H Analogue Addressable Fixed/ Rate Of Rise Heat Detector UL Listed-Grinnell Branded 912I Analogue Addressable Ion Chamber Smoke Detector -UL Listed-Grinnell Branded 912P Analogue Addressable Optical Smoke Detector - UL Listed - Grinnell Branded 912PH Analogue Addressable High Performance Optical Smoke Detector -UL Listed - Grinnell Branded 4B UL 4B Lo Pro Detector Base (4") Grinnell Branded 6B UL 6B Lo Pro Detector Base (6") -Grinnell Branded M900K 900 Series Smart Card Address Key M900F Smart Card Address Key Programmer Freestanding M900C Smart Card Address Key Programmer For Use With A Laptop Computer Running MINERVA/TFX Configuration Software - CONSYS Spare Fireray 2000 Beam Detector Transmitter Spare Fireray 2000 Beam Detector Receiver Spare Fireray2000 Main PCB 600RBA UL Approved M600 Series Relay Base Assembly 900RBA UL Approved M900 Series Relay Base Assembly S111 Infra Red Flame Detector Solar Blind Plug And Socket Connection S112 Infra Red Flame Detector Non Solar Blind Plug And Socket Connection S121 Infra Red Flame Detector Solar Blind Screw Terminal Connections S121 Infra Red Flame Detector Solar Blind Screw Terminal Connections (Pyrotronics) FM Approved S122 Infra Red Flame Detector Non Solar Blind Screw Terminal Connections (Pyrotronics) S161 Infra Red Flame Detector Solar Blind Complete With Built In Intrinsically Safe Isolation Area Page Stockcode 516.009.023 516.009.028 77, 78 516.014.017 516.014.018 77, 78 516.014.019 516.014.020 78 516.014.021 78 516.014.025 78, 79 516.014.026 66 516.015.006.A 45 516.015.006.T 45 516.015.007 Product Description S131 Infra Red Flame Detector Solar Blind S131 Infra Red Flame Detector Solar Blind Pyrotronics H600 60C Fixed Temp Heat Detector H900 90C Fixed Temp Heat Detector H602 60C Fixed Temp Heat Detector C/W Local Indicator H902 90C Fixed Temp Heat Detector C/W Local Indicator H601 60C Fixed Temp Heat Detector - Remote Indicator H904 90C Fixed Temp Heat Detector C/W Local Indicator Intrinsically Safe H904 90C Fixed Temp Heat Detector C/W Local Indicator Intrinsically Safe FR2000 Optical Beam Smoke Detector - ADT FR2000 Optical Beam Smoke Detector-Thorn Fireray 2000 Retro-reflector 100x100mm Each. Can be Used Individually or in Banks of 6 for Longer Range Fireray 2000 Alignment Tool STI9625 Beam Detector Guard - For Use With Fireray 2000 Beam Detectors And Other Large Detectors Fireray 50R 5- 50 Metre Reflective Beam Smoke Detector 12V-24Vdc Fireray 100R 50-100 Metre Reflective Beam Smoke Detector 12V- 24Vdc LD40-BLUE High Resistance Sensor Cable Blue-200m Reel LD-40-BLCK High Resistance Sensor Cable Black-200m Reel (Nylon Sheath Suitable For Petrochemical Exposure Etc) LD40 EOL Termination Kit LD40 In-Line Jointing Kit LD40 ANALYSER MODULE. ALARMLINE SERIES 4LHD K82012 MXF100 CONTROLLER C/W 3 TIER WALL MOUNTED CABINET AND PSU MXF-SL SENSOR LINE THERMOPLASTIC SENSOR CABLE (1KM REEL) MXF-SS SENSOR TUBE STAINLESS STEEL SENSOR CABLE (1KM REEL) VLP-012 LaserPLUS Detector + Programmer + Display VLP-002 LaserPLUS Detector + Display VLP-000 LaserPLUS Detector VLS-214 FD7 Scanner + Programmer + Display VLS-204 FD7 Scanner + Display VLS-200 FD7 Scanner VLS-314 FD12 Scanner + Programmer + Display VLS-304 FD12 Scanner + Display VLS-300 FD12 Scanner VLC-500-RO VESDA LaserCOMPACT With Relay Outputs VLC-505-VN VESDA LaserCOMPACT with VESDAnet Interface VLP-400 LaserPLUS Detector With Fire/Ok LED VLS-600 FD7 LaserPLUS Scanner With FIRE OK LED VLS-700 FD12 LaserPLUS Scanner With FIRE OK LED VRT-100 Remote Programmer VRT-200 Remote Display Including 7 Relays VRT-300 Remote VESDAnet Socket VRT-400 Remote Scan Display Including 7 Relays Page 60 516.018.107 60 516.018.108 65 516.018.119 65 516.018.120 65 516.018.201 65 516.018.203 65 516.018.204 65 516.018.206 65 516.018.210 69 69 516.018.214 Stockcode 516.018.106 Product Description VRT-600 Remote Detector Display - No Relays VRT-700 Remote Scanner Display - No Relays VRT-800 Remote Scanner Display With 12 Relays VRT-J00 LaserCOMPACT Remote Display Complete With 7 Relays VRT-K00 LaserCOMPACT Remote Display With No Interface Relays VSR-2000 19" Subrack With 1 Detector Display + 3 Blanks VSR-2210 19" Subrack Two Detector Displays, Programmer And 1 Blank VSR-2221 19" Subrack With 3 Detector Displays And Programmer VSR-2222 19" Sub Rack With Four Detector Displays VSR-CUSTOM Custom Sub-Rack Housing Includes Cost Of Custom Building 4 Vsu Sub Rack Units VSU-E Blank Scanner Sub-Unit With 7 Interface Relays For Custom Sub-Racks VSU-J LaserCOMPACT Display Sub-Unit With 7 Relays For Ordering In Custom Sub-Racks VSU-0 Blank Sub Unit VSU-1 Programmer Sub Unit VSU-2 Detector Display Sub Unit+7 Relays VSU-5 Blank Subunit With 7 Relays VSU-8 Scanner Display Subunit With 12 Relays VSU-9 Blank Display Subunit With 12 Relays VESDA Scanner Decal-Swedish 020-052 19 Inch Rack Enclosure (2 Rows) 020-055 19 Inch Rack Enclosure (5 Rows) 020-050 IP65 Enclosure VHH-1000 Hand Held Programmer Plus Leads VHX-0200 PC Link HLI (High Level Interface) Plus Leads (Mk2) VSW-004 Vconfig Basic Configuration Software VSW-002 Aspire For Windows Aspirating Design Software 014.015 VESDA 24v Dc 2a Power Supply and Charger VSP-002 Detector Display (Spare) VSP-004 Scanner Display (Spare) VSP-001 Programmer (Spare) VSP-005 Filter Cartridge (Spare) VSP-019 Filter Cover Door (Spare) VSP-006 Spare Detector Chassis + Manifold VSP-008 Spare Remote Termination Card 7 Relays VSP-009 Spare Scanner Chassis + Manifold VSP-014 Spare Header Termination Card 7 Relays VSP-015 Spare Aspirator Fan MS302EX Infra Red Flame Detector MF501EX Analogue Addressable Ion Chamber Smoke Detector MR501EX Analogue Addressable Optical Smoke Detector MR501TEX Analogue Addressable High Performance Optical Smoke Detector MS502EX Addressable Infra Red Flame Detector MD501EX Analogue Addressable Heat Detector T4E60X T54B Point Type Heat Detector - 60C T4E90X T54B Point Type Heat Detector - 90C T4E100X T54B Point Type Heat Detector - 100C Page 56 56 56 56 56 57

515.001.036

515.001.037

515.001.038 515.001.039 515.001.041

57

57 57

515453

515455

57

515456

57

516.018.219 69 69 516.018.260 516.018.261 516.018.262 78 516.018.265 69 516.018.268 69 70 516.018.269 516.018.270 516.018.301 516.018.302 70 70 70 516.018.303 516.018.401 516.018.402 70 516.018.403 71 516.018.404 516.018.407 71 516.018.501 516.018.502 516.018.503 516.018.504 516.018.505 516.018.506 516.018.508 516.018.509 516.018.514 516.018.515 516.022.001 516.030.002 55 516.031.002 516.031.005 55 55 56 56 56 56 516.033.013 56 56 516.032.001 516.033.002 516.033.011 516.033.012

45 516.015.008 516.015.009 44

515457

57 57 57 57 57 57 57 58 57 57 57 57 57 57 57 57 58 58 58 58 58 58 58 58 58 58 63 62 63

515458

516.015.011 44 516.015.012 42 516.016.005 42 516.016.006

515461

515462

515463

41 516.016.010 516.016.011 516.016.012 41 48 48 516.016.112 53 53 516.016.113 516.016.111

515464

515467 515468 515472 515474 515475

71 55 55 55 56 56 56 56 56 56

516.018.001 53 69 69 69 52 52 516.018.002 516.018.003 516.018.004 516.018.005 516.018.006 516.018.007 516.018.008 516.018.009 516.018.010

515484 515485 515487 515590 515591 516.009.006

60 516.018.011 60 516.018.013 60 516.018.016 516.018.019 60 516.018.101 516.018.102 60 516.018.103 60 516.018.104

516.009.007

516.009.008

62 63 63 64 64 64

516.009.014

516.009.019

516.009.022

Page 104

INDEX
Stockcode 516.033.014 516.037.003 516.037.004 516.037.015 Product Description T4E145X T54B Point Type Heat Detector - 145C S231F+ Triple IR Flame Detector With Conventional Circuit I/F S231I+ Triple IR Flame Detector With Convenitonal I/F S232f+ Triple Channel Ir Flame Detector With Conventional Detection Zone Interface S241F+ Triple IR Flame Detector With 4 To 20mA Interface S241I+ Triple IR Flame Detector With 4 To 20mA I/F S251F+ Triple IR Flame Detector With Thorn Analogue Addressable I/F S251I+ Triple IR Flame Detector With Thorn Analogue Addressable I/F S252f+ Triple Ir Flame Detector With MINERVA Addressable Interface S261F+ Triple IR Flame Detector With Relay Outputs S262F PLUS S262f Plus Triple IR Flame Detector With Alarm And Fault Relay Output Interface MF601 Conventional Ion Chamber Detector LPCB Approved MF601 Conventional Ion Chamber Detector LPCB Approved MF601Ex Conventional Ion Chamber Detector 612I Conventional Ion Chamber Detector - UL Listed - Thorn Security MF613 Conventional Ion Chamber Detector - VdS Approved MF601M Conventional Ion Chamber Smoke Detector Marine Approved MF901 Analogue Addressable Ion Chamber Smoke Detector -LPCB Approved MF901 Analogue Addressable Ion Chamber Smoke Detector -LPCB Approved MF901 Analogue Addressable Ion Chamber Smoke Detector -LPCB Approved 912I Analogue Addressable Ion Chamber Smoke Detector -UL Listed-Thorn Security MF901M Analogue Addressable Ion Chamber Smoke Detector Marine Approved MD601 Conventional Heat Detector Grade 1 Rate Of Rise -LPCB Approved MD601 Conventional Heat Detector Grade 1 Rate Of Rise -LPCB Approved MD601 Conventional Heat Detector Grade 1 Rate Of Rise -LPCB Approved MD611 Conventional Heat Detector Fixed 60C & EN54 Pt5 Grade 2 Rate Of Rise -LPCB Approved MD611 Conventional Heat Detector Fixed 60C & EN54 Pt5 Grade 2 Rate Of Rise -LPCB Approved MD611 Conventional Heat Detector Fixed 60c & En54 Pt5 Grade 2 Rate Of Rise -LPCB Approved MD613 Conventional Heat Detector Grade 1 Rate of Rise - VdS Approved - ZETTLER Branded K07226455 632H Conventional Heat Detector 200F Degrees Fixed Temperature - UL Listed - Thorn Security 612H Conventional 135F Rate Of Rise Heat Detector - UL Listed - Thorn Security MD623 Conventional Heat Detector 60C Fixed And EN54 PT5 Grade 2 Rate of Rise VdS Approved Page 64 516.052.051.Y 59 516.053.001.A 59 516.053.001.T 59 59 59 516.054.001.A 59 516.054.001.T 59 516.054.001.Y 59 516.054.011.Y 59 516.054.041.W 59 516.055.001.A 45 45 62 516.055.001.Y 45 516.055.031 45 516.055.001.T 516.053.002 Stockcode 516.052.041.Y Product Description MD611Ex Conventional Heat Detector - Marine Approved MD601Ex Conventional Heat Detector MD901 Analogue Addressable Fixed/ Rate Of Rise Heat Detector LPCB Approved MD901 Analogue Addressable Fixed/ Rate Of Rise Heat Detector LPCB Approved 912H Analogue Addressable Fixed/ Rate Of Rise Heat Detector -UL Listed-Thorn Security MR601T Conventional High Performance Optical Smoke Detector - LPCB Approved MR601T Conventional High Performance Optical Smoke Detector - LPCB Approved MR601T Conventional High Performance Optical Smoke Detector - LPCB Approved MR601TEx Conventional High Performance Optical Smoke Detector MR613 Conventional Optical Smoke Detector MR901T Analogue Addressable High Performance Optical Smoke Detector -LPCB Approved MR901T Analogue Addressable High Performance Optical Smoke Detector -LPCB Approved MR901T Analogue Addressable High Performance Optical Smoke Detector -LPCB Approved 912HP Analogue Addressable High Performance Optical Smoke Detector -UL Listed-Thorn Security MR601 Conventional Optical Smoke Detector - LPCB Approved MR601 Conventional Optical Smoke Detector - LPCB Approved MR601 Conventional Optical Smoke Detector - LPCB Approved 612P Conventional Optical Smoke Detector - UL Listed-Thorn Security MR601M Conventional Optical Smoke Detector Marine Approved MR901 Analogue Addressable Optical Smoke Detector -LPCB Approved MR901 Analogue Addressable Optical Smoke Detector -LPCB Approved MR901 Analogue Addressable Optical Smoke Detector -LPCB Approved 912P Analogue Addressable Optical Smoke Detector - UL Listed- Thorn Security MR901M Analogue Addressable Optical Smoke Detector Marine Approved MU601 Conventional Carbon Monoxide Fire Detector LPCB Approved MU601 Conventional Carbon Monoxide Fire Detector - LPCB Approved MU601 Conventional Carbon Monoxide Fire Detector - LPCB Approved MU601 Conventional Carbon Monoxide Fire Detector - LPCB Approved MU901 Analogue Addressable Carbon Monoxide Fire Detector - LPCB Approved MU901 Analogue Addressable Carbon Monoxide Fire Detector - LPCB Approved MU901 Analogue Addressable Carbon Monoxide Fire Detector - LPCB Approved Page 63 63 516.060.022 42 Stockcode 516.060.021 Product Description Page S860 Meggitt Avionics Omniguard 860 UV/IR Flame Detector With Self Test. Stainless Steel Construction And 3/4" Standard Connection 61 "S860 Meggitt Avionics Omniguard 860 UV/IR Flame Detector With Self Test. Aluminium Construction And 3/4" Standard Connection. Yellow Finish 61 S660 Meggitt Avionics Omniguard 660 UV Flame Detector With Self Test. Stainless Steel Construction And 3/4" Standard Connection 61 S660 Meggitt Avionics Omniguard 660 UV Flame Detector With Self Test. Aluminium Construction And 3/4" Standard Connection. Yellow Finish 61 SPS/V Vertical Mounting Probe Sensor Complete With Cover For Use With DETEK Panels 92 SFD Face Down Sensor Pad For Use With DETEK Panels 92 SFD/C Protective Cover For Face Down Sensor Pad 516.200.006 Sfd 92 CD/5 5 Metre Length Of Sensing Cable For DETEK Water Leak Detection Panels 92 CD/10 10 Metre Length Of Sensing Cable For DETEK Water Leak Detection Panels 92 SOL Start Of Line For Sensing Cable For DETEK Water Leak Detection Panels ( Not needed For Pads 92 EOL End Of Line For Sensing Cable For DETEK Water Leak Detection Panels 92 FFI Sensing Cable Fixing Clips For DETEK Water Leak Detection Panels 92 CDT Sensing Cable Identification Tags For DETEK Water Leak Detection Panels 92 SFU Sensor Pad Face Up For DETEK Water Leak Detection Panels 92 901SB Universal Sounder Base for BS5839/EN54 Applications 49 912SB Universal UL Sounder base - For use with M900 and 800 series detectors. Requires separate 24Vd.c. Fulleon tones 49 DP450 Probe Tube 450mm & Exhaust 54 DP600 Probe Tube 600mm & Exhaust 54 DP750 Probe Tube 750mm & Exhaust 54 DP900 Probe Tube 900mm & Exhaust 54 DP1200 Probe Tube 1200mm & Exhaust 54 DP1500 Probe Tube 1500mm & Exhaust 54 SYSTEM 601 EOL UNIT (P-10) 64, 66, 68 DHM8 Deckhead Mounting Assembly For H-Series 65 DHM 7 Earthing Strip (Spare) For Use As Earthing Strip On Deckhead Mounts 53 S100/200 BRKT Flame Detector Brkt Assembly (Stainless Steel) For Use With All S100/200 Series Detectors 61 UC2 4,Way Barrier Housing 68 MT2 2,Way Zener Barrier Housing 68 MT5 5,Way Zener Barrier Housing 68 MTL728 Zener Safety Barrier 67 MTL788 Zener Safety Barrier 67 MTL3021 Galvanic Isolation Safety Barrier Not CE Approved NON EU only 67

516.038.003 516.038.004 516.039.003

42 516.060.025 42

44 516.060.026 44

516.039.004

516.039.015

44

516.200.004

516.040.002 516.040.012

62 44

516.200.006 516.200.007

516.050.001.A 516.050.001.T 516.050.004.Y 516.050.031

41

516.200.010

41

516.200.011

41

516.200.012

516.050.041.W 516.050.401

41 44

516.200.013

45

516.056.001.A 516.056.001.T

516.051.001.A

516.200.014 44 44 516.200.015

42 516.056.001.Y 42 516.056.031

516.051.001.T

516.051.001.Y

44

516.200.016

42

516.056.401

516.051.031

44

516.800.911 516.800.912

42

516.057.001.A

516.051.401

41

42

516.057.001.T

516.052.001.A

41

517.001.035 517.001.036

45

516.057.001.Y

516.052.001.T

41 517.001.037 41 517.001.038 517.001.039 41 517.001.040 44 517.001.120 517.001.130 44 517.001.181 44 517.001.184 44 517.001.196 517.001.198 517.001.199 517.001.201 517.001.202 517.001.203

45

516.057.031

516.052.001.Y

45

516.057.401

516.052.011.A

45

516.058.001.A

516.052.011.T

516.058.001.T 45 516.058.001.W 45 516.058.001.Y 45 516.059.001.A 45 516.059.001.T 45 516.059.001.Y

516.052.011.Y

516.052.013.W

516.052.022

41

516.052.031

41

516.052.033.W

41

45

Page 105

INDEX
Stockcode 517.001.204 517.001.205 517.001.206 517.001.207 517.001.224 Product Description Page MTL3043 Galvanic Isolation Safety Barrier Not CE Approved Non EU only 67 ERL7 Earth Rail I.S.Systems 68 ETM7 Earth Termination Connection System 68 IMB7 Insulating Mounting Block 68 SOLO704 Adaptor Tube B Adapts SOLO 100 / 101 Pole Sets For TYCO Detector Changers And Testers 59, 72 SOLO101 Extension Tube 1.3m Long For Use With 517-001-230 Telescopic Extension Pole 72 SOLO100 Telescopic Extension Pole 1.26m To 4.5m Long 59, 72 DHM69 MARINE Deckhead Mounting For M600/900 Series 53, 64 Carbon Monoxide Detector Field Test Kit With 24 Brickets For Use With SOLO302/330 72 Carbon Monoxide Fire Detector Field Test Kit Spare Bricks (Pack Of 24) 72 SOLO200 Universal Detector Changer For Use With Various Manufacturers Detectors 72 SOLO720 Spare Battery Baton For Use With SOLO450/460 Tester 72 SOLO724 Spare Mains/Car Battery Charger For SOLO720 Battery Baton 72 MTL5061 2 Channel Galvanic Isolator For Conventional Detector Zone - Used On BASEEFA Approved System 601 67 MTL5021 I.S. Sounder Driver 67 MTL7128+ Zener Safety Barrier For Conventional Detection Circuits Designed In Accordance With System 601 67 DX170 Enclosure For MTL5000 Or 7000 Series Barriers 68 DX070 Enclsoure MTL5000 Or 7000 Series Barriers 68 Cordless Heat Detector Tester Kit 72 Aerosol Smoke Dispenser Solo 330-006 72 Aerosol Smoke Canisters Solo A3-006 72 SOLO610 Protective Carry / Storage Bags - For SOLO Detector Test Kit Items and Others 72 VESDA LBL Sampling Point Label 57 VESDA LBL Aspirating Pipe Label 57 M300EX Mounting Base 64 M300/M500 Base Lock Kit 64 MP35 Duct Probe Unit For M300/500 Series 54 MB35 Flush Mounting Kit For M300/400/500 Series 64 T35 Skirt Changer Tool For Use With M300/400/500 Series 72 SMP35 Duct Probe Unit Stainless Steel For M300/500 Series 54 DPS450 Probe Tube Stainless Steel 450mm & Exhaust 54 DPS600 Probe Tube Stainless Steel 600mm & Exhaust 54 DPS750 Probe Tube Stainless Steel 750mm & Exhaust 54 DPS900 Probe Tube Stainless Steel 900mm & Exhaust 54 DPS1500 Probe Tube Stainless Steel 1500mm & Exhaust 54 SMP69 Stainless Steel Duct Probe Unit And Universal Detector Base For M600/900 Series (EN54) 54 MP69 Duct Probe Unit And Base For M600/900 Series (EN54) 54 M500EX Mounting Base 64 M500 Protective Cover. 64 M520 Anciliary Cover For Use With M520 Modules and M800 Series Ancilliaries 14 DM520 MINERVA Conventional Detector Module - Allows One Conventional Detection Zone To Be Interfaced To The Loop 12 Stockcode 517.035.017 517.035.018 517.050.001 Product Description MDM521 MINERVA Multi Circuit Conventional Detector Module - For Up To 8 Conventional Zones DM520/M520 Detector Module And Cover AssembLED M600/800/900 4" Universal Mounting Base for LPCB, VdS Approved Detectors SA600/900 Low Profile Line Shorting Adaptor Commissioning Tool - ADT Branded CA600 Low Profile Line Continuity Adaptor Commissioning Tool - ADT Branded CA600 Low Profile Line Continuity Adaptor Commissioning Tool M69 Detector Changer For Use With M600/900 Series Pack Of 100 Detector Locking Pins For M600/900 Series M600 Diode Continuity Mounting Base For Conventional Detection Zones Including Callpoints BS5839 Applications Only W500 White Plastic Coated Steel Protective Cage For M6/900 Series Detectors Volume Adjustment Tool for MKII Sounder Base Range Tyco MK2 Sounder Base Range Colour Code Identification Card (Must Order in Multiples of 100) 4B Lo Pro Detector Base (4") Thorn Security Branded 6B Lo Pro Detector Base (6") - Thorn Security Branded M900K M900 Smart Card Address Key M900F Smart Card Address Key Programmer Freestanding M900C Smart Card Address Key Programmer For Use With A Laptop Computer Running MINERVA/TFX Configuration Software - CONSYS M900km Smart Card Address Key Marine Approved 4651045 Meggitt Avionics Swivel Bracket In Black 70991 Meggitt Avionics Swivel Bracket In Stainless Steel MODEL 540 HAND HELD UV/IR TEST GUN FOR USE WITH 860 SERIES DETECTORS Airshield For Omniguard S660 And S860 Flame Detectors 24 zone analogue addressable controller, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and VDF display. 2 hardwire sounder circuits. RS232 and RS485 ports. BS5839 and EN 54 Standard. Supplied c/w 2 helical antennas (Not inc Batteries) 12 zone analogue addressable controller Panel, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and VFD display. 2 hardwire sounder circuits. RS232 and RS485 ports. BS5839 and EN 54 Standard. Supplied c/w 2 helical antennas (Not inc Batts) VHF aerial c/w 20m RG213 coax. Radio manual call point c/w transmitter, processor, radio address module, battery board (supplied with glass substitute card)-Red Addressable Optical Smoke Detector with 4 sensitivity settings c/w transmitter, processor, radio address module battery board, ceiling mount Addressable Heat Detector with 4 sensitivity settings c/w transmitter, processor, radio address module, battery board, ceiling mount Page Stockcode 517.131.007 12 12 517.131.008 Product Description Electronic radio sounder c/w VHF transmitter, UHF receiver, processor, radio address module, battery board Interface input/output unit (used for output signals to activate other equipment) c/w transmitter, processor, radio address module, battery board Analogue addressable optical smoke detector with 4 sensitivity settings c/w transmitter, processor, radio address module battery board, ceiling mount 96 zone analogue addressable radio LAN controller, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and VFD display. 2 hardwire sounder circuits RS232 and RS485 ports. BS5839 and EN54 Standard. C/W 2 Helical Antennas and Thermal Printer 24 zone analogue addressable radio LAN controller with printer option, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and LCD display with option for VFD display. 2 hardwire sounder circuits RS232 and RS485 ports.c/w 2 helical antennas 24 zone analogue addressable radio LAN controller, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and LCD display with option for VFD display. 2 hardwire sounder circuits RS232 and RS485 ports. Inc c/w 2 helical antennas & thermal printer 12 zone LAN analogue addressable controller Panel with printer option, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and LCD display. 2 hardwire sounder circuits. RS232 and RS485 ports. c/w 2 helical antennas 12 zone radio LAN analogue addressable controller with panel mounted event printer, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and LCD display. 2 hardwire sounder circuits. RS232 and RS485 ports. c/w 2 helical antennas & thermal printer 4 zone radio LAN addressable controller Panel, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and LCD display. 2 hardwire sounder circuits. RS232 and RS485 ports. Supplied c/w 2 helical antennas 96 zone analogue addressable controller Panel with panel mounted printer, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and VFD display. 2 hardwire sounder circuits. RS232 and RS485 ports. c/w 2 helical antennas 24 zone analogue addressable controller Panel with panel mounted printer, VHF receiver, UHF transmitter, 252 device capacity c/w keypad and LCD display with option for VFD display. 2 hardwire sounder circuits. RS232 and RS485 ports c/w 2 helical antennas 4-Zone Addressable Control Panel VHF receiver, UHF transmitter, 252 device capacity c/w keypad and LCD display. 2 hardwire sounder circuits. RS232 and RS485 ports. BS5839 and EN 54 Standard. Supplied c/w 2 helical antennas (batteries are not supplied) Page 96

48 517.131.009 53

517.050.002.A

97

517.001.226

517.050.003.A

53 517.131.011 53 72 52

94

517.001.230 517.001.231 517.001.233

517.050.003.T 517.050.004 517.050.005 517.050.007

517.001.234

93

48

517.131.012

517.001.240

517.050.011

53 49

517.001.242 517.001.243

517.050.015 517.050.016

50 517.131.013 48 48 53 53 517.131.014

93

517.001.244

517.050.601 517.050.606 517.051.002 517.051.007 517.051.008

517.001.245 517.001.246

93

517.001.247 517.001.248 517.001.254 517.001.255 517.001.256 517.001.264

53 53 61 61 517.131.015

517.051.402 517.060.001 517.060.002 517.060.003

93

517.017.005 517.017.006 517.025.002 517.025.010 517.025.021 517.025.022 517.025.026 517.025.027 517.025.028 517.025.029 517.025.030 517.025.031 517.025.033 517.025.035

61 61 517.131.016

517.060.005 517.131.001

93

93

93

517.131.017

517.131.002

93

517.131.018 93 97

517.131.003 517.131.004

517.025.036 517.035.002 517.035.006 517.035.007

95 517.131.019

517.131.005

93

94

517.035.012

517.131.006

94

93

Page 106

INDEX
Stockcode 517.131.020 517.131.021 517.131.022 517.131.023 517.131.024 Product Description Page VHF dipole half wave antenna c/w 10m RG58 cable and bracket 97 VHF helical aerial c/w BNC connector 97 UHF high gain aerial 97 UHF helical antenna c/w BNC connector 97 UHF high gain directional aerial c/w wall mounding bracket, extension pole and 10m low loss RG213 cable. 97 Transponder signal processor, receiver VHF signals from local devices and transmits on UHF to receiver installed adjacent to main controller. The transponder requires 230v supply and is complete with integral PSU. Unit is fitted with 2 helical aerials 95 Transponder for 4-zone addressable system, receiver VHF signals from local devices and transmits on UHF to receiver installed adjacent to main controller. Requires 230V and is complete with an integral PSU Unit is fitted with 2 helical aerials 95 VHF remote radio receiver c/w integral PSU. Receives signal from VHF transmitters 95 UHF remote radio receiver. Receives UHF signal from transponder / processor 95 Heat detector with 4 sensitivity settings c/w transmitter, processor, radio address module, battery board, ceiling mount (complete) 94 Combined Multi-Sensor (Analogue addressable optical smoke & Heat) 95 Combined sounder/analogue optical smoke detector c/w VHF transmitter, UHF receiver, analogue addressable optical smoke detector with 4 sensitivity settings and 90 dbA electronic sounder including 3 x C alkaline batteries and 3 x AA alkaline batteries. 95 Combined sounder/heat detector c/w VHF transmitter, UHF receiver, analogue addressable heat detector with 4 sensitivity settings and 90 dbA electronic sounder including 3 x C alkaline batteries and 3 x AA alkaline batteries. 95 Analogue addressable optical smoke detector sensor (Replacement only) 97 Heat detector sensor (Replacement only) 97 Addressable transmitter / processor / battery 97 Addressable optical smoke detector sensor (Replacement only) 97 Addressable Heat detector sensor (Replacement only) 97 Addressable transmitter / processor / battery 97 Radio manual call point c/w transmitter, processor, radio address module, battery board (supplied with glass substitute card) - Yellow 95 Weather proof red call point c/w transmitter, processor, battery board and glass substitute card 95 Hard-wired call point (For use with Sounder 5320/R) 95 Hard-wired call point (For use with all versions of controller) 95 Electronic radio sounder c/w VHF transmitter, UHF receiver, processor, radio address module, battery board Red 96 Electronic radio sounder c/w VHF transmitter, UHF receiver, processor, radio address module, battery board - white case 96 Stockcode 517.131.045 517.131.046 517.131.047 517.131.048 517.131.049 517.131.050 Product Description Page Radio sounder and red strobe unit 96 White radio sounder and red strobe unit 96 Red radio strobe unit 96 White boxed radio red strobe unit 96 Red radio sounder with auxiliary contact input 96 Red Master radio sounder c/w connections for up to 1 monitored slave voice sounder units, VHF transmitter, UHF receiver, processor, radio address module 96 Red slave radio sounder - For connection to 5-5350 96 Red voice sounder c/w VHF transmitter, UHF receiver, processor, radio address module, battery board, 4 onboard messages activated from any EMS controller 96 Voice sounder/strobe c/w VHF transmitter, UHF receiver, processor, radio address module, battery board, 4 on-board messages activated from any EMS controller 97 White voice sounder c/w VHF transmitter, UHF receiver, processor, radio address module, battery board, 4 on-board messages activated from any EMS controller 96 Voice sounder/strobe c/w VHF transmitter, UHF receiver, processor, radio address module, battery board, 4 on-board messages activated from any EMS controller 97 Weatherproof voice sounder c/w VHF transmitter, UHF receiver, processor, radio address module, battery board, 4 on-board messages activated from any EMS controller 97 Master Voice Unit c/w connections for up to 1 monitored slave voice sounder units, VHF transmitter, UHF receiver, processor , radio address module, battery board, 4 on-board messages activated from any EMS controller 97 Slave Voice Unit For connection to 5-5381 with its own monitored battery supply 97 Addressable Interface input/output unit (used for output signals to activate other equipment) c/w transmitter, processor, radio address module, battery board 97 Interface input/output unit (used for output signals to activate other equipment) c/w transmitter, processor, radio address module, battery board, external antenna and housed in metal case 97 Plant I/O shunt unit for plant isolation during test mode (4 zone) 97 77CR19 Emergency Cable Release 24v D.C. 39 77CR19 Emergency Cable Release 240v A.C. 39 DRU/240 High Quality TEPG Door Release Magnet Set 240v Ac Complete With Keeper Plate 39 DRU/24 High Quality TEPG Door Release Magnet Set 24v.Dc Complete With Keeper Plate 39 Door Release Button UK Single Gang Mounting - With Danger Mains Text 39 Fire Notice Frame 212mm X 297mm 90 Fire Notice Frame 280mm X 356mm 90 Fire Notice Frame 483mm X 737mm 90 Fire Notice Frame 483mm X 367mm 90 Stockcode 526.001.016.T Product Description T510 Extinguishing - Main To Reserve Change Over Keyswitch Unit With Two Keys - Thorn Branded Manual Extinguishing Release Unit (Pull Handle Linked To Gas Container Via Steel Cable) Extinguishing Release Hold Button Unit (To Suit Single Gang UK Style Back Box) Extinguishing Abort Button Unit (To Suit Single Gang UK Style Back Box) T5XX Top Hat Frangible Insert(Spare) T5XX Frangible Washers (Spare) (pack of 25) Microswitch Lock Keep & Backplate For Deadlock MK2 LMP/F Lamp (Red) / Buzzer Unit Flush Mounting Mk2 Including Single Gang Backbox. LabelLED 'Fire'. MK2 LMP/S Lamp (Red) /Buzzer Unit Surface Mounting Mk2. LabelLED 'Fire'. 1W Xenon Beacon Low Profile Clear 24vdc 1watt 1W Xenon Beacon Low Profile Blue 24v Dc 1watt 1W Xenon Beacon Low Profile Amber 24vdc 1watt 1W Xenon Beacon Low Profile Red 24v Dc 1watt Xenon Beacon (0.5 Joule), GRP Material, IP66, Clear Lens (XB8BB024CNR) Xenon Beacon (5 Joule), EExd IIB T5, IP66/67 GRP Material, Red Lens, ATEX EX II 2G (XB11B02406RNBNNNR) RIL M600/900 Series Remote Indicator LED Square UK Single Gang Mounting - Thorn Branded Heavy Duty IP67 Cast Aluminium Surface Mount Red Lamp Unit 24 Dc. With Indicator Plate LabelLED 'Extinguishing System Operated' Heavy Duty IP67 Cast Alauminium Surface Mount Red/Amber/Green Lamp Unit 24 Dc. With Indicator Plates LabelLED 'Extinguishing System- Operated / Automatic / Manual' (E3 ) I3 IP67 Surface Mount Red/Amber/Green Lamp Unit 24 Dc. LabelLED 'Gas Release', 'Auto', 'Manual' I4 IP67 Surface Mount Red/Amber/Green Lamp Unit 24 Dc With Auto/Manual Keyswitch LabelLED 'Gas Release', 'Auto', 'Manual' 1500 5 Way Zone Monitor PCB Can Be Used On Any Monitored Sounder Circuit To Take Up To 5 Spurs Into A Sounder Output. Suitable For Mounting In Control Equipment LI520 MK2 MINERVA Line Isolator Module MI900 Line Isolator Base For Use With M900 Detectors On MINERVA Systems (Also Compatible With TFX Systems But Not UL Approved) LI520ASSY LI520/M520 Line Isolator And Cover AssembLED PI521 MINERVA Plant Interface AM921 MINERVA Aspirator Detector Interface Module For Vision Systems LaserPLUS Aspirating Systems Fits In Detectors, 7 Relay Scanners And 7 Remote Relay Termination Cards (Not Suitable For VRT-200 And VRT-400) Page 33

526.001.018.A

34

526.001.019.A

34

526.001.020.A

517.131.025

34 35 34, 35 35

517.131.051 517.131.052

527.001.003 527.001.013 527.001.028 540.001.012

517.131.026

517.131.053

88

540.001.013

88 88 88 88 88

540.001.030 540.001.031 540.001.032 540.001.033 540.001.038

517.131.027

517.131.054

517.131.028

517.131.029

517.131.055

89

517.131.030

540.001.039

517.131.056

517.131.031

88

540.003.006.T

53

540.007.001

517.131.057

517.131.032

35

540.007.002

517.131.058

35

517.131.033

517.131.059

540.007.006

517.131.034 517.131.035 517.131.036

35

540.007.007

517.131.060

35

541.001.018

517.131.037 517.131.038 517.131.039

517.131.061

518.003.003 518.003.004 518.004.004

90 11

545.001.007 545.001.008

517.131.040

518.004.005

52 11 13

517.131.041 517.131.042 517.131.043

545.001.009 546.004.006 546.004.007

519.001.007

525.001.005 525.001.006 525.001.007 525.001.008

517.131.044

13

Page 107

INDEX
Stockcode 547.004.001 555.180.002 555.180.003 555.180.021 555.180.026 557.001.040.A Product Description PI/SU Din Rail Mounting Kit For Use With PI521 Or SU521 MINERVA 16E Front Cover Assy (Spare) MINERVA 80 Front Cover Assy(Spare) CM520 MINERVA Contact Monitor Module (1 Input) CM520/M520 Contact Module And Cover AssembLED MK2 Sounder Cap Can be used with SB601 & SB602 sounders ADT Branded (Pk of 5) MK2 Sounder Cap Can be used with SB601 & SB602 sounders Thorn Branded (Pk of 5) MK2 Sounder Cap Can be used with SB601 & SB602 sounders Tyco Branded (Pk of 5) ACPM MINERVA Power Module 2.7amps Non Addressable MINERVA Power Module 2.7amps Addressable MINERVA 80 Way Mimic Driver Module for use with MINERVA and MX panels MINERVA 80 Motherboard PCB (Spare) MINERVA Multi Purpose Interface Module. Available As A Spare For MINERVA Panels And Repeaters Or For Providing Expansion Using XIOM Modules ALXM MINERVA Addressable Loop Expansion Module (2 Loops) For Use With MINERVA 80 XIOM MINERVA Input/Output Expansion Module 16 Way for use with MINERVA or MX panels MINERVA Plain Cover Assembly For Use With General Purpose Housings MINERVA Terminal Chamber PCB Assembly MINERVA General Purpose Housing Surface MINERVA General Purpose Housing Flush MINERVA General Purpose Expansion Housing Surface MINERVA LCD Repeater For Use With MINERVA Analogue Addressable Fire Controller Systems MINERVA LCD Repeater For Use With MINERVA Analogue Addressable Fire Controller Systems Dc/Dc Convertor Module Serial Printer Driver Kit MINERVA 16 Mounting Plate Kit (Spare) MINERVA 8/16E Battery Fitting Kit LEAD MINERVA Serial Printer Lead Assembly MINERVA MPIM To PC (D25) Serial Lead Assembly (As Grinnell 940558) MINERVA 80 Battery Fitting Kit MINERVA Wall Mounted Printer May Be Mounted Adjacent To Surface Mounting Controllers - ADT Branded MINERVA Wall Mounted Printer May Be Mounted Adjacent To Surface Mounting Controllers - Thorn Branded Bezel - Flush Mounting For Wall Mounting Printer 557-180-076 MINERVA Loop Power Insertion Module. Converts MINERVA 8 And 16E To Loop Powered Controllers MINERVA Ancillary Stacking Kit For Use With Ancillary Housing 8 557-180-096 MINERVA Ancillary Hsg - 8 For Use With M5xx Ancillary Modules (Can Accommodate Up To 16 M520 Modules With Stacking Kit) Page 13, 14 10 10 11 11 557.180.097.T 557.180.097.A Stockcode 557.180.096.T Product Description Page ANC8 MINERVA Ancillary Hsg - 8 For Use With M5xx Ancillary Modules (Can Accommodate Up To 16 M520 Modules With Stacking Kit) 14 ANC3 MINERVA Ancillary Hsg 3 For Use With M5xx Ancillary Modules (Can Accommodate Up To 3 M520 Modules) 14 ANC3 MINERVA Ancillary Hsg - 3 For Use With M5xx Ancillary Modules (Can Accommodate Up To 3 M520 Modules) 14 Full CONSYS Software Key (Dongle) 9 Customer/Distributor Software Key (Dongle) 9 TLK V2.36 TLK Firmware Version 2.36 - Spare 4 Housing For a Combination of 2 X TLO530 OR TLD530 Communication Interfaces (Available Thorn and ADT Branded) 4 RS232/422 Convertor For Use With MLCD Repeater 8 DB9 Male To Male Gender Changer For Use With 557.180.151 8 MINERVA16E Version 12.1 Spare EPROM 9 MINERVA 80 Version 12.1 Spare EPROM 9 MINERVA ALXM Version 12.1 Spare EPROM 9 MINERVA16E Firmware Version 12.2 (With Mos Event Reporting Fix) 9 MINERVA 80 Firmware Version 12.2 (With Mos Event Reporting Fix) 9 MINERVA ALXM Firmware Version 12.2 9 MINERVA 16 PEPROM VERS 12.3 9 MINERVA 80 PEPROM VERS 12.3 9 MINERVA ALXM PEPROM VERS 12.3 9 MINERVA 16 PEPROM KIT V12.4 9 MINERVA 80 PEPROM KIT V12.4 9 MINERVA ALXM PEPROM KIT V12.4 9 MP MINERVA Main Processor PCB No Software Fitted 10 LEAD Printer Lead Assembly D Type AngLED For Use With Wall Printer 8 ALXM-LP Addressable Loop Expansion Module Loop Powered(2 Loops) For Use With MINERVA 80 LP 5 M80SPARE Motherboard Loop Powered For Use With MINERVA 80 (Spare) 10 LPDCM MINERVA Dc/Dc Convertor Loop Powered 7 Spare Keys (Used On MINERVA Controllers 10 Keyswitch Assembly For Use With MINERVA Controllers (Spare) 10 LQ 300 Epson dot matrix alarm printer - 24 pin 80 character 9 TLK530 Thorn Net Network Node Interface Module 4 LPBD521 MINERVA Loop Powered Beam Detector Interface Module For Use With Fireray 2000 13, 70 TLK530G Thorn Net Interface For Thorngraph PC C/W PSU And Housings 4 LEAD Thorn Graph To TLK-530 Connection Cable Between PC And TLK 530G 4 LQ80 Ribbon Black (Spare) for use with LQ 300 plus printer 9 MINERVA Wall Mounting Printing Ribbon (Spare) 8 MINERVA Customer CONSYS V12.1 9 Stockcode 557.180.401 Product Description T890M MINERVA Marine Analogue Addressable Controller Supplied with 1 ALXM (2 loops) but can expand to 10 Loops T891 M MINERVA Marine Analogue Addressable Controller 2 Loops T290 M MINERVA Marine Repeater Unit For Use With T890m T291 M MINERVA Marine Repeater Unit For Use With T891m T680 M MINERVA Marine Power Unit TXX M MINERVA Marine Terminal Chamber T891 Front Cover Assembly T890 Front Cover Assembly TXX M MINERVA Marine Battery Fitting Kit TM520 Timer Module - Non Addressable TXX M MINERVA Marine ALXM MINERVA 19" Rack Mounting Kit For Use With Surface Mounting Housings TXX M MINERVA Marine Bulkhead Mounting Kit MINERVA16E Controller Surface Mounting Complete With P.S.U MINERVA16E Controller Flush Mounting Complete With P.S.U MINERVA16E Repeater Surface Mounting MINERVA16E Repeater Flush Mounting MINERVA 80 Controller Surface Mounting C/W One ALXM Requires P.S.U. MINERVA 80 Controller Flush Mounting C/W One ALXM Requires P.S.U MINERVA 80 Repeater Surface Mounting MINERVA 80 Repeater Flush Mounting MINERVA Power Box (Addressable) Surface Mounting Complete With 2.7 Ahr P.S.U. MINERVA Power Box (NonAddressable) Surface Mounting Complete With 2.7 Ahr P.S.U MINERVA 8 Controller Surface Mounting Complete With P.S.U. MINERVA 8 Controller Flush Mounting Complete With P.S.U. MINERVA 8 Repeater Surface Mounting Complete With P.S.U. MINERVA 80 Controller Arabic MINERVA16E Controller Arabic MINERVA 80 Controller Surface Mounting Loop Powered C/W One ALXM Requires P.S.U. M80LP MINERVA 80 Controller Flush Mounting Loop Powered C/W One ALXM Requires P.S.U. MINERVA16E Mandarin Version MINERVA 80 Mandarin Version TFX-500M 2 Loop Fire Control Panel With Red Architectural Door Grinnell Branded In 3 Tier Housing With Fcm/Ocm And 16 LED Indicator TFX-800M Fire Detection Panel With Red Architectural Door And Grinnell Branding In 7 Tier Housing With Fcm/Odm And 80 LED Indicator TFX400 Two Loop Ul/FM Approved Fire Control Panel. Supplied In Grey With Thorn Security Branding. 940577 MINERVA MPIM To PC (D9) Serial Lead TLD530 Thorn Net Direct Line Driver PCB MINERVA 8 Controller Dutch MINERVA 80 Controller Dutch MINERVA16E Controller Dutch Page 5

557.180.402

5 5 5 5 10 10 10 5, 10 11 5

557.180.403 557.180.404 557.180.405 557.180.406 557.180.407 557.180.408 557.180.410 557.180.423 557.180.424 557.180.452

49 557.180.105 49 557.180.106 557.180.147 49 557.180.148.A 8 8 557.180.151 7 10 557.180.152 557.180.155 557.180.156 557.180.157 7 557.180.159 5 557.180.160 7 557.180.161 10 10 10 10 10 557.180.163 557.180.164 557.180.165 557.180.167 557.180.168 557.180.169 557.180.200 557.180.202 8 557.180.203

557.001.040.T

557.001.040.Y

557.180.001 557.180.002 557.180.005

10 5, 10

557.180.454 557.180.550

557.180.010 557.180.012

5 5 5 5

557.180.553 557.180.554 557.180.555 557.180.556

557.180.014

557.180.016

557.180.021

557.180.557

5 5 5

557.180.022 557.180.032 557.180.033 557.180.034 557.180.035.A

557.180.558 557.180.559 557.180.560

557.180.561

8 5 5 5 5 5

557.180.564 557.180.565 557.180.566 557.180.567 557.180.568 557.180.569

557.180.035.T

557.180.051 557.180.052 557.180.054 557.180.055 557.180.062 557.180.063

8 7 7, 8 10 5 8, 9

557.180.204

557.180.205 557.180.208 557.180.209

557.180.570

557.180.065 557.180.076.A

9 5

557.180.214 557.180.215 557.180.217

557.180.575 557.180.576 557.180.623

5 5 5

15

557.180.076.T

557.180.624

557.180.218 8 8 557.180.219

557.180.079 557.180.092

15

557.180.625

557.180.220 5 557.180.223 14 557.180.234

15 8, 9 4 5 5 5

557.180.667 557.180.699 557.180.701 557.180.702 557.180.703

557.180.095

557.180.096.A

14

Page 108

INDEX
Stockcode 557.180.722 557.180.831 557.180.832 557.180.833 558.004.006 558.004.007 Product Description Page M80 SPARE MINERVA 80 Cover Assembly Dutch (Spare) 10 MINERVA16E Main Processor PEPROM Vers 12 9 MINERVA 80 Main Processor PEPROM Vers 12 9 MINERVA 80 ALXM PEPROM Vers 12 9 C2440 C Range Charger 24v 4 Amp 40 TRR-243 24v Dc 3a Transformer / Rectifier Unit For Door Release Units. Includes 24v Volt Free Relay Interface. 40 C RANGE Housing Type D Complete With Metres 40 C RANGE Housing Type D 40 C RANGE Housing Type C Complete With Metres 40 C RANGE Housing Type C 40 12v 38Ah Battery 39 6v 10Ah Battery 36, 39 12v 17Ah Battery 39 12V 17AH BATTERY - INVERTED TERMINALS 39 RELAY 5000 Relay 5000 (2 Way Relay Unit) 90 RELAY 5010 Relay 5010 (5 Way Relay Unit) 90 RELAY 5016 Relay 5016 (8 Way Rly Unit) 90 240V MK4 Alarm Relay 240v Ac Mk4 90 24V MK4 Alarm Relay 24v Dc Mk4 90 5016PCB Relay 5016 PCB For 8 Relays 90 Relay 5000 Housing Auxiliary Relay (Small) 90 Relay 5010 Housing Auxiliary Relay (Large) 90 MINERVA Relay Module (1 X 24V DC Rated Relay) 11 SU521 MINERVA Shop Unit Interface 14 SD520 MINERVA Smoke Damper Interface Module ( 2 Inputs And 1 Output) 13 MC900 Low Power Relay For Use With Any M900 Low Profile Detector 52 RM520/M520 Relay Module And Cover Assemby LED 11 MC600 Low Power Relay For Use With Any M600 Low Profile Detector - Not Compatible With System 1600 And T880 Series Detection Panels 52 26V RLY Cradle Relay And Retaining Clip 2 C/O 26v Nominal 700 Ohm Coil 5 Amp Used With Relay 5000 And 5010 90 Universal Mounting Base K07226456 48 M69 Detector Locking Pin Kit (Pack Of 100) K07226458 52 Red Bell 6" 240v Ac Solenoid Operated. 'Fire' Text With ADT Branding 84 Red Bell 6" 240v Ac Solenoid Operated. 'Fire' Text With Thorn Branding 84 Bell 6" 24v.D.C.Solenoid Operated. 'Fire' Text With ADT Branding 84 Bell 6" 24v.D.C.Solenoid Operated. 'Fire' Text With Thorn Branding 84 Yodalarm 3" 24v Dc IP54 96db @1m Frequency 800-1000Hz 30mA 86 Yodalarm 8" 24v.D.C. IP54 rating 112db@1m Frequency 800-1000Hz 330mA YO8 86 Banshee 24V.DC BS5839 Low Frequency Low Profile Red 107dba Effective - 15mA (ADT Branded) 85 Banshee 24V.DC BS5839 Low Frequency Low Profile Red 107dba Effective - 15mA (Thorn Branded) 85 Stockcode 576.501.008.A 576.501.008.T Product Description Page Banshee 24V DC High Frequency Low Profile Red - 105dba Effective - 25mA (ADT Branded) 85 Banshee 24V DC High Frequency Low Profile Red - 105dba Effective - 25mA (Thorn Branded) 85 Banshee/Bedlam Weatherproof Mains Adaptor Pack 240v A.C. To 24v D.C. Use On Any 24v D.C. Banshee Or Bedlam 85 IS28VCL Banshee IS28 BS5839 Low Frequency BASEEFA Certified Intrinsically Safe - Red Sounder 98dba - 10mA Certificate NO. Ex87B2027 EE xia IIC T5 Suitable to Relplace Banshee IS22B 86 Bedlam 24V D.C. Low Profile Weatherproof - Red 117dba Effective - 30mA (ADT Branded) 85 Bedlam 24V D.C. Low Profile Weatherproof - Red 117dba Effective - 30mA (Thorn Branded) 85 Banshee 24v D.C. Slow Whoop Low Profile Red Dutch 86 Bell 6" 24v D.C. Motorised. 'Fire' Text With ADT Branding 81 Bell 6" 24v D.C. Motorised. 'Fire' Text With Thorn Branding 81 Bell 8" 24v D.C. Motorised. 'Fire' Text With ADT Branding 81 Bell 8" 24v D.C. Motorised. 'Fire' Text With Thorn Branding 81 IP66 Banshee Weatherproof 24V D.C. BS5839 Low Frequency Low Profile - Red 107dba Effective - 15mA (ADT Branded) 85 IP66 Banshee Weatherproof 24V D.C. BS5839 Low Frequency Low Profile - Red - 107dba Effective - 15mA (Thorn Branded) 85 Squashni White 24V DC 81 Blank Cover Plate White For Squashni 81 Flush Mounting Square (86 X 86) Bedroom Sounder 24V D.C.-White - 90dba @ 1M Typical - 7mA (ADT Branded) 85 Flush Mounting Square (86 X 86) Bedroom Sounder - 24V D.C.-White - 90dba @ 1M Typical - 7ma (Thorn Branded) 85 Banshee 24V D.C. BS5839 Low Frequency, Low Profile - White107dba Effective - 15ma (ADT Branded) 85 Banshee 24V D.C. BS5839 Low Frequency, Low Profile - White 107dba Effective - 15mA (Thorn Branded) 85 MFC1SEA Red ADT UK Firecryer Single English Message Synchronised Voice Enhanced Sounder. Message Ref. Ak 87 MFC4SUA Red ADT UK Firecryer Four English Message Synchronised Voice Enhanced Sounder. Message Refs. Akabspae (Fire/Alert/ADT Fire Test/All Clear) 87 MFC1EA Red ADT UK Firecryer Single English Fire Message Unsynchronised Voice Enhanced Sounder. Message Ref. Ak 87 MFC4DEMO Firecryer 4 Message Demo Box 87 Besson Wafer Sounder And Blank Cover In White 85 Motorised Bell 6" 24v.D.C. 'Fire' Text With ADT Branding. 15ma Low Power 84 Motorised Bell 6" 24v.D.C. 'Fire' Text With Thorn Branding. 15ma Low Power 84 Motorised Bell 8" 24v.D.C. 'Fire' Text With ADT Branding. 84 Banshee/Xenon Bracket 85 Banshee IP66 Backbox For Use With Loop Powered Banshees And Firecryers 85, 87 Stockcode 576.501.043 Product Description Red Horn Sounder, Up to 115dB(A), in GRP Material, EExd IIC T5, IP66/67, ATEX EX II 2G (DB3/D/048/N/1B/N/R) MFC1SB Firecryer Single Message Synch Board For Use With Single Message Synchronised MINERVA Firecryers MFC4SB Firecryer 4 Message Synch Board For Use With 4 Message MINERVA Firecryers MFC4ENC 4 Message Synch Board Enclosure With 3 Position Keyswitch For Use With 576.501.101 MFC4SCA Red ADT Branded 4 Message Synchronised Firecryer With Custom Messages. Messages Must Be Specified At The Time Of Ordering SY/R Low power red Symphoni sounder with slow sweep 500-1200Hz tone SY/W Low power white Symphoni sounder with slow sweep 500-1200Hz tone SYHO/R Symphoni Red High Output Sounder SYHO/W Symphoni White High Output Sounder SY2/R/TYCO Symphoni Red 2 Wire Sounder SY2/W/TYCO Symphoni White 2 Wire Sounder Flashni Red Body Red Lens, Low Profile, Shallow Base Sounder, Tone Switch Flashni White Body Red Lens, Low Profile, Shallow Base Sounder, Tone Switch FLASHNI Red Lens, Red Body Shallow Base, Tone selection switch, separate sounder strobe operation Askari, Tone 3, Red Sweeping 800/970 Hz at 1 Hz MINIMITE Secomak 24v Dc Sounder Siren - Range 370yds Weatherproof Gasket Box 6" For Use With Solenoid Operated Bells Flush Mounting Bracket For Use With Low Profile Banshees White SM520 MINERVA Sounder Driver Module SB520 MINERVA Sounder Booster Module 15amps LPBB520R Loop Powered Addressable Besson Banshee - Red - ADT Branded LPBB520R Loop Powered Addressable Besson Banshee - Red - Thorn Branded LPS520 MINERVA Line Power Sounder Module For Use With 24v Banshees (Max.6) LPBB520W Loop Powered Addressable Besson Banshee White - ADT Branded LPBB520W Loop Powered Addressable Besson Banshee White - Thorn Branded SM520/M520 Sounder Module And Cover AssembLED SB520/M520 Booster Module And Cover Assembled 601SB Conventional EN54:3 Sounder base - For use with M600 series detectors. Requires separate 24Vd.c. Fulleon tones 602SB Conventional 2 wire line powered EN54:3 Sounder base for use with MX Conventional panels. Fulleon tones 601SBD Conventional EN54:3 Sounder diode base - For use with M600 series detectors. Requires separate 24Vd.c. Fulleon tones Page 83

576.501.100

576.501.011

87

576.501.101

576.501.013

87

576.501.103

558.004.013 558.004.014 558.004.015 558.004.016 560.001.012 560.001.013 560.001.015 560.001.016 567.001.004 567.005.004 567.005.005 567.007.008 567.007.009 568.001.006 568.001.007 568.001.008 568.001.011 568.001.013 568.001.014

87

576.501.104.A

576.501.015.A

576.501.015.T

87

576.501.200

576.501.019 576.501.022.A 576.501.022.T 576.501.023.A 576.501.023.T 576.501.024.A

80

576.501.201

80 80 80 80 80

576.501.202 576.501.203 576.501.204 576.501.205 576.501.224

576.501.024.T

82

576.501.225

82

576.501.030 576.501.031 576.501.032.A

576.501.226

82 81 86

576.501.240 576.502.010 577.001.002

576.501.032.T

568.001.016

84

568.001.017 568.001.018

576.501.033.A

577.001.006

85 12 12

577.001.022 577.001.023 577.001.026.A

576.501.033.T

569.001.007

576.501.034.A

85

577.001.026.T

571.07 571.071 576.500.004.A

576.501.035.A

85

577.001.027

12

577.001.029.A

576.501.036.A

576.500.004.T

85

577.001.029.T

576.500.009.A 576.500.009.T 576.501.001

576.501.037 576.501.038 576.501.039.A

85 12 12

577.001.032 577.001.033 577.001.035

576.501.003

576.501.039.T

49

577.001.036

576.501.004.A

576.501.040.A 576.501.041 576.501.042

49

577.001.037

576.501.004.T

49

Page 109

INDEX
Stockcode 577.001.038 Product Description 602SBD Conventional 2 wire line powered EN54:3 Sounder diode base - For use with MX Conventional Panels. Fulleon tones VM520 HSG Voice Sounder Housng For Use With Both Conventional And Analogue Addressable Fire Systems VM520 PCB Voice Sounder PCB Module For Use With Housing 577.001.101. LPCB Approved. Flush Mounting Loudspeaker 8,Ohms VM520 PEPROM (IC6) PAGER TX Pager Transmitter Type A Alarm Pager Type A Maintenance Pager Pager Aerial Standard Up To 1Km Optional Feeder Cable for UAZ (MINERVA Pager) SPRKLR DLY Sprinkler Delay Module T110 Adaptor For S131/161 T110 PP9 Battery And Charger Kit T110 Carrying Case (Not Suitable For T210) T110 Test Source For Use With (517.001.224) SOLO704 Adaptor Tube B And SOLO100/101 Poles (517.001.230/226) T210 Adaptor S200 T210 Plus Test Source For S200plus Flame Detectors Only. Suitable For Use In Hazardous Areas T505/515 Lamp 28v 40mA Midget Used On T505/515 T525 Lamp 28v 60mA(MCC) Used On T525 Lamp 36v 30mA Bi-Pin Used On System 1600/T880 And Extingusihing Systems T520 & T530 LOOP A Label Loop A White LOOP B Label Loop B Yellow LOOP C Label Loop C Purple LOOP D Label Loop D Green LOOP E Label-Loop E Grey LOOP F Label-Loop F Blue LOOP G Label Loop G Orange LOOP H Label Loop H Red LOOP I Label Loop I Darkblue LOOP J Label Loop J Black ZONE 1-16 Label Zones 1-16 ZN 17-32 Label Zones 17-32 ZN 33-48 Label-Zones 33-48 ZN 49-64 Label-Zones 49-64 ZN 65-80 Label-Zones 65-80 P34R P34 P Clip Red For Use With Datywler Lifeline Cable. Suitable For Use 2 Core 1 & 1.5mm And 3 Core 1mm (Order In Multiples Of 50) P34W P34 P Clip White For Use With Datywler Lifeline Cable. Suitable For Use 2 Core 1 & 1.5mm And 3 Core 1mm (Order In Multiples Of 50) P37R P37 P Clip Red For Use With Datywler Lifeline Cable. Suitable For Use 2 Core 2.5mm , 3 Core 1.5mm & 4 Core 1mm (Order In Multiples Of 50) P40R P40 P Clip Red For Use With Datywler Lifeline Cable. Suitable For Use 3 Core 2.5mm & 4 Core 1.5mm (Order In Multiples Of 50) P43R P43 P Clip Red For Use With Datywler Lifeline Cable. Suitable For Use 7 Core 1.5mm & 4 Core 2.5mm (Order In Multiples Of 50) NG1 Red Gland Kit For Lifeline (Order In Multiples Of 10) NG1W White Gland Kit For Lifeline (Order In Multiples Of 10) Page Stockcode 599.048.020 599.048.022 49 599.048.023 599.048.024 89 599.048.032 599.048.034 89 599.048.035 89 89 9 9 9 9 9 90 61, 73 61, 73 90-107 61, 73 90-110 636.006.060 660.001.003 660.001.004 660.002.010 660.002.012 70-133 850509 90-106 Product Description Page LIFELINE Cable 1mm 2 Core & Earth Red 91 LIFELINE Cable 1.5mm 2 Core & Earth Red 91 LIFELINE Cable 1.5mm 2 Core & Earth White 91 LIFELINE Cable 2.5mm 2 Core & Earth Red 91 LIFELINE Cable 1mm 4 Core & Earth Red 91 LIFELINE Cable 1.5mm 4 Core & Earth Red 91 LIFELINE Cable 1.5mm 4 Core & Earth White 91 Dell 17" FST monitor - part of kit for Thorn Graph or SGA PC 3 6v 1.2Ah Battery 39 12v 24Ah Battery 39 12v 4Ah Battery 39 12v 12Ah Battery 39 Flush Callpoint KR72-680 Wormald 75 TFX500 & 800M Field Wiring Guide 16 Test Keys For All CP200 / 500 / 800 / 900 Callpoints Except CP950EX 76 M141 Red M141 Spacer For Red CP2/8/900 KAC Callpoints 76 KR1 Flush Red Callpoint KAC Model KR1 Wormald Branded comes with NO and NC contact 75 RPS-424 TFX Spare Dual Voltage Power Supply/Charger. Used On All TFX Panels. 17, 21 Fireray2000 Optical Beam Smoke Detector Complete - UL Approved 69 TFX / CONSYS Programming Cable With DB9 Female Connector. CONSYS Software Available On Document Control. 16 SR3T Callpoint Back Box 79 TFX RMS-1T Single Action Non-Addressable Pull Station 22 TFX Spare Glass Rod For Use With RMS Pullstations 22 TFX Surface Mount Backbox For Use With RMS Pullstations 22 TFX-MPIM Multi-Purpose Interface Module Used For Driving Additional LED Indicators, Status Control Modules, I/O Expansion And Printers 18 TFX IAS-500 End-Of-Line (EOL) Assembly 19 TFX CAA-500LI Line Isolator Module Complete With 2 Gang Mounting Plate 20 TFX DCPM Dc/Dc Convertor For Use As A Spare Or With Additional MPIM Modules 17 TFX LIB-800 Two Loop Addressable Expansion Module For Use As A Spare Or Expanding The TFX-800M To A Maximum Of 10 Loops 18 TFX IAM-800 Additional / Spare Motherboard For TFX-800M 18 TFX OAA-16 Digital Output Expansion Unit For Use With MPIM 18 TFX IAA-16 Digital Input Expansion for use with MPIM 18 TFX OMA-80 Mimic Driver PCB For Use With MPIM 18 TFX IXA-501CM Addressable Mini Contact Module 20 TFX IXA-500CMA Addressable Contact Module Complete With Us Double Gang Mounting Plate 20 TFX IXA-500DMA Addressable Detector Zone Interface Module Complete With Double Gang Us Mounting Plate 20 TFX XAA-16 8 Input & 8 Output Expansion Board For Use With MPIM 18 TFX 500PSM Power Supply Monitor Module 17 TFX TLI-530 Module Kit For Use On TFX-Net Only 19 Stockcode 976166 976250 976254 976258 Product Description TLO-530 Board Kit For Use With TFX-Net Spare TFX 27k 1w Resistors For Use With 505/6SDA TFX Spare Keys For Use On TFX OCM And Door TFX OXA-502RM Addressable Relay Module Complete With Us Double Gang Mounting Plate TFX SIM Serial Interface Module Provides Isolation To Serial Printers. TFX IXA-RMS Addressable Indoor Pullstation For Use On TFX Panels TFX MDM521 Addressable Multi-Way Conventional Detection Zone Interface For 1-8 Zones TFX 506SDA Addressable Sounder/Notification Device Output Module Complete With Us Double Gang Mounting Plate. Used For Switching Sounder And Speaker Circuits TFX OCP Remote Operator Control Panel With Fire Control Module (FCM) And Operator Display Module (ODM) TFX OCP Remote Operator Contrl Panel With Fire Control Module And 16 Indicator LED Module (FCM/16ind) TFX Semi Flush Backbox For Use With All Remote Operator Control Panels TFX Surface Mount Backbox For Use With Any Remote Operator Control Panel TFX400 Two Loop Ul /FM Approved Fire Control Panel Supplied In Red With Grinnell Branding. TFX 40x2 Indicator With MPIM Board. Provides An Additional 40x2 Zone Indicators For Use With TFX-500M Or TFX-800M TFX 40 Way Status Control Module And MPIM Module For Adding To TFX-500M Or TFX-800M 16 Way Status Control Module With MPIM. For Use With TFX-500M Or TFX-800M TFX 80IND/1 80 Indicator Module With One Integral MPIM Card For Use On TFX-800M TFX IND80/2 80 Way Indicator Module With 2 MPIM Modules Built In. M600/800/900 Series Range Identifier Card (Must be ordered in multiples of 100) Askari Sounder - White Roshni Sounder Deep Base Red Page 4, 19 21 16

577.001.101

21

577.001.102

976262

16

577.001.106 577.001.107 577.002.001 577.002.002 577.002.003 577.002.007 577.002.008 584.002.001 592.001.005 592.001.010 592.001.011 592.001.012

976277

22

976375

21

976378

21

976402

16

976403

592.001.014 592.001.016

61, 73 59, 73

910683

16

976404

920450 59, 73 35 35 95-131 960673 960684 35 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 960687 976015 940577

16

976416

599.001.011 599.001.012 599.001.020

16

976422

15

9976130

599.047.001 599.047.002 599.047.003 599.047.004 599.047.005 599.047.006 599.047.007 599.047.008 599.047.009 599.047.010 599.047.011 599.047.012 599.047.013 599.047.014 599.047.015 599.048.001

16

9976132

16

9976134

976016 976026

16

9976136

16

9976137

976040

16

AM2801/000

976062

ASKW ROSHRDSR

47 81 81

91 976063 976066 91 976067 976077 91 976081 976092

599.048.002

599.048.003

599.048.005

91

976093

599.048.007

976098 91 91 91 976122 976165

599.048.009 599.048.010

Page 110

Notes

Notes

Notes

Notes

Fire Product Catalogue

JAN 2003 Issue 3

Whos Where?
Product Management Sunbury +44 (0) 1932 743327 Field Support Sunbury +44 (0) 1932 743327 Helpdesk Sunbury Tel: Fax: Customer Services (UK) Walthamstow +44 (0) 208 919 4000 Distribution Centre (UK) Letchworth +44 (0) 1462 667 700

+44 (0) 1932 743327 +44 (0) 1932 743330

Tyco Safety Products

tepghelp@tycoint.com

Sunbury The Summit, Hanworth Road Sunbury On Thames Middlesex TW16 5DB Telephone: +44 (0) 1932 743333 Facsimile: +44 (0) 1932 743330
The right is reserved to modify or withdraw any product or service without notice Product Catalogue PMC001 Issue 3
Tyco Safety Products 2002

Walthamstow 160 Billet Road Walthamstow London E17 5DR Telephone: +44 (0) 208 919 4000 Facsimile: +44 (0) 208 919 4040

Letchworth Dunhams Lane Letchworth Herts. SG6 1BE Telephone: +44 (0) 1 462 667 700 Facsimile: +44 (0) 1 462 667 777

www.tycosafetyproducts-europe.com