Maint Sched 12 or 8 V183 TE93
Maint Sched 12 or 8 V183 TE93
D 000 01
Diesel Engines 8 V 183 TE 93 (OM 442 LA) 12 V 183 TE 93 (OM 444 LA) Maintenance Task Schedule M050522/03E
MTU Motoren- und Turbinen-Union Friedrichshafen GmbH 88040 Friedrichshafen / Germany Telephone (07541) 90-0 Telex 734 280-0 mt d Telefax (07541) 90-3928 Low operating and maintenance costs as well as operational reliability and availability depend on maintenance and servicing being carried out in compliance with our specifications and instructions. The overall system, of which the engine is an integral part, must be maintained in such a way as to ensure troublefree engine operation at all times. For this purpose always: - ensure that sufficient fuel is available, - ensure that the combustion air is dry and clean, - use only dry, clean compressed air, - use only clean, filtered raw water. Moreover, it is essential that: - maintenance tasks be completed by trained personnel, - suitable tools be used, - genuine spare parts and fluids and lubricants as per the current MTU Fluids and Lubricants Specification A001061 be used. Our Product Support Service will always be available should assistance be required. Preventive maintenance instructions. - Special care should be taken to keep the machinery plant in a clean and serviceable condition at all times to facilitate early detection of possible leaks and prevent subsequent damage. - Protect rubber and synthetic components from oil and fuel, never treat with organic detergents. Wipe with a dry cloth only. - Always replace all seals and gaskets. MTU Maintenance Concept The maintenance concept is a preventive maintenance concept and features the maintenance echelons W1 to W6 as outlined below. Preventive maintenance facilitates advance planning and ensures a high degree of equipment availability. Main features of the maintenance echelons: Operational checks - W1: - W2, W3 and W4: Periodic maintenance tasks to be performed during out-of-service periods without the need for engine disassembly. - W5: Major overhaul. This echelon requires complete engine disassembly. - W6: The time intervals according to which the W2 to W6 Maintenance Echelons and the relevant checks and tasks involved are to be completed are based on operational experience. They have been determined so as to ensure correct engine operation until the next scheduled maintenance echelon. Use of a maintenance predictor can mean changes to the operating hours given in the Maintenance Frequency Chart. Specific operational conditions may require modification of the Maintenance Schedule.
NOTE: The codes on the following pages refer to the groups and subgroups of the Task Descriptions in Part G of the Engine Operation Manual. This Maintenance Schedule may refer to parts which are not installed on your engine, these may be disregarded.
50522/03 01-01
D 000 02
Maintenance Schedule
Application Group 1DS: Fast vessels with low load factors Maintenance Frequency Chart Maintenance Echelon W1: Operational checks, daily W2: Operating hours Limit, months W3: Operating hours Limit, year W4: Operating hours Limit, year(s) W5: Operating hours Limit, year(s) W6: Operating hours Limit, year(s) Maintenance Task Schedule Code No.
G00.049 G06.101 G12.311 G12.311 G13.112 G88.911
One-time operations after the first 50 operating hours. - With a new engine, after W5 maintenance echelon, or after W6 major overhaul
Attachments Valve gear Fuel pre-filter Fuel pre-filter Engine coolant pump Belt drive Check tightness of securing screws and nuts Check clearances, adjust if necessary Clean Replace filter element Check relief bore for obstructions Check condition and tension, re-tension if necessary
Code No.
G10.051 G10.211 G12.311 G12.311 G12.311 G14.011 G14.511 G16.002 G84.001 G84.002
50522/03 01-01
D 000 03 W 2 3 4
Maintenance Echelons
Intake air line Engine oil
G16.111
G86.621 G88.911 G06.101 G10.531 G12.321 G13.112 G16.009 G14.012 G84.311 G88.111 G01.411 G05.109 G10.122 G10.141 G11.311 G12.311 G14.314 G14.912 G19.011 G19.171 G84.011 G86.321 G88.911
Compressed-air filter Belt drive Valve gear Exhaust system Fuel duplex filter Engine coolant pump Lubrication point(s) Engine coolant Engine coolant system Coupling Crankcase ventilation Cylinders Air filter Intercooler Fuel injector(s) Fuel pre-filter Coolant cooler Engine coolant system Engine mounts Gearbox mounting Monitoring system Wiring Belt drive
Maintenance Echelon W6 Requires complete engine disassembly for repair/overhaul of all relevant parts, or the installation of an overhauled engine. Important: Note the following In the case of a new engine: - Mark the oil dipstick according to drawing standard 506 000 02 99. During the initial putting-into-service of a new engine, or an engine from which the oil has been drained from the system or filters (assembly or maintenance task i.e. = oil change), - actuate the engine shutdown system with the shutdown button and simultaneously turn over the engine with the starter until the oil-pressure gauge responds. Do not operate the starter for more than 20 uninterrupted seconds, and allow a cooling-off period of 1 minute afterwards. Before an out-of-service period of more than one week: - Close the intake and exhaust openings airtight. Before a prolonged out-of-service period: - Spray oil into the combustion chambers and bar the engine manually once a month. If the engine is to remain out of service for more than 3 months, carry out engine preservation in accordance with the Engine Operation Manual.
50522/03 01-01
D 000 04
Maintenance Schedule
50522/03 01-01